blob: dc3551796e5ed856f0aac9d7777b786a47ceee62 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright 2020 Xillybus Ltd, http://xillybus.com
*
* Driver for the XillyUSB FPGA/host framework.
*
* This driver interfaces with a special IP core in an FPGA, setting up
* a pipe between a hardware FIFO in the programmable logic and a device
* file in the host. The number of such pipes and their attributes are
* set up on the logic. This driver detects these automatically and
* creates the device files accordingly.
*/
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/list.h>
#include <linux/device.h>
#include <linux/module.h>
#include <asm/byteorder.h>
#include <linux/io.h>
#include <linux/interrupt.h>
#include <linux/sched.h>
#include <linux/fs.h>
#include <linux/spinlock.h>
#include <linux/mutex.h>
#include <linux/workqueue.h>
#include <linux/crc32.h>
#include <linux/poll.h>
#include <linux/delay.h>
#include <linux/usb.h>
#include "xillybus_class.h"
MODULE_DESCRIPTION("Driver for XillyUSB FPGA IP Core");
MODULE_AUTHOR("Eli Billauer, Xillybus Ltd.");
MODULE_ALIAS("xillyusb");
MODULE_LICENSE("GPL v2");
#define XILLY_RX_TIMEOUT (10 * HZ / 1000)
#define XILLY_RESPONSE_TIMEOUT (500 * HZ / 1000)
#define BUF_SIZE_ORDER 4
#define BUFNUM 8
#define LOG2_IDT_FIFO_SIZE 16
#define LOG2_INITIAL_FIFO_BUF_SIZE 16
#define MSG_EP_NUM 1
#define IN_EP_NUM 1
static const char xillyname[] = "xillyusb";
static unsigned int fifo_buf_order;
#define USB_VENDOR_ID_XILINX 0x03fd
#define USB_VENDOR_ID_ALTERA 0x09fb
#define USB_PRODUCT_ID_XILLYUSB 0xebbe
static const struct usb_device_id xillyusb_table[] = {
{ USB_DEVICE(USB_VENDOR_ID_XILINX, USB_PRODUCT_ID_XILLYUSB) },
{ USB_DEVICE(USB_VENDOR_ID_ALTERA, USB_PRODUCT_ID_XILLYUSB) },
{ }
};
MODULE_DEVICE_TABLE(usb, xillyusb_table);
struct xillyusb_dev;
struct xillyfifo {
unsigned int bufsize; /* In bytes, always a power of 2 */
unsigned int bufnum;
unsigned int size; /* Lazy: Equals bufsize * bufnum */
unsigned int buf_order;
int fill; /* Number of bytes in the FIFO */
spinlock_t lock;
wait_queue_head_t waitq;
unsigned int readpos;
unsigned int readbuf;
unsigned int writepos;
unsigned int writebuf;
char **mem;
};
struct xillyusb_channel;
struct xillyusb_endpoint {
struct xillyusb_dev *xdev;
struct mutex ep_mutex; /* serialize operations on endpoint */
struct list_head buffers;
struct list_head filled_buffers;
spinlock_t buffers_lock; /* protect these two lists */
unsigned int order;
unsigned int buffer_size;
unsigned int fill_mask;
int outstanding_urbs;
struct usb_anchor anchor;
struct xillyfifo fifo;
struct work_struct workitem;
bool shutting_down;
bool drained;
bool wake_on_drain;
u8 ep_num;
};
struct xillyusb_channel {
struct xillyusb_dev *xdev;
struct xillyfifo *in_fifo;
struct xillyusb_endpoint *out_ep;
struct mutex lock; /* protect @out_ep, @in_fifo, bit fields below */
struct mutex in_mutex; /* serialize fops on FPGA to host stream */
struct mutex out_mutex; /* serialize fops on host to FPGA stream */
wait_queue_head_t flushq;
int chan_idx;
u32 in_consumed_bytes;
u32 in_current_checkpoint;
u32 out_bytes;
unsigned int in_log2_element_size;
unsigned int out_log2_element_size;
unsigned int in_log2_fifo_size;
unsigned int out_log2_fifo_size;
unsigned int read_data_ok; /* EOF not arrived (yet) */
unsigned int poll_used;
unsigned int flushing;
unsigned int flushed;
unsigned int canceled;
/* Bit fields protected by @lock except for initialization */
unsigned readable:1;
unsigned writable:1;
unsigned open_for_read:1;
unsigned open_for_write:1;
unsigned in_synchronous:1;
unsigned out_synchronous:1;
unsigned in_seekable:1;
unsigned out_seekable:1;
};
struct xillybuffer {
struct list_head entry;
struct xillyusb_endpoint *ep;
void *buf;
unsigned int len;
};
struct xillyusb_dev {
struct xillyusb_channel *channels;
struct usb_device *udev;
struct device *dev; /* For dev_err() and such */
struct kref kref;
struct workqueue_struct *workq;
int error;
spinlock_t error_lock; /* protect @error */
struct work_struct wakeup_workitem;
int num_channels;
struct xillyusb_endpoint *msg_ep;
struct xillyusb_endpoint *in_ep;
struct mutex msg_mutex; /* serialize opcode transmission */
int in_bytes_left;
int leftover_chan_num;
unsigned int in_counter;
struct mutex process_in_mutex; /* synchronize wakeup_all() */
};
/* FPGA to host opcodes */
enum {
OPCODE_DATA = 0,
OPCODE_QUIESCE_ACK = 1,
OPCODE_EOF = 2,
OPCODE_REACHED_CHECKPOINT = 3,
OPCODE_CANCELED_CHECKPOINT = 4,
};
/* Host to FPGA opcodes */
enum {
OPCODE_QUIESCE = 0,
OPCODE_REQ_IDT = 1,
OPCODE_SET_CHECKPOINT = 2,
OPCODE_CLOSE = 3,
OPCODE_SET_PUSH = 4,
OPCODE_UPDATE_PUSH = 5,
OPCODE_CANCEL_CHECKPOINT = 6,
OPCODE_SET_ADDR = 7,
};
/*
* fifo_write() and fifo_read() are NOT reentrant (i.e. concurrent multiple
* calls to each on the same FIFO is not allowed) however it's OK to have
* threads calling each of the two functions once on the same FIFO, and
* at the same time.
*/
static int fifo_write(struct xillyfifo *fifo,
const void *data, unsigned int len,
int (*copier)(void *, const void *, int))
{
unsigned int done = 0;
unsigned int todo = len;
unsigned int nmax;
unsigned int writepos = fifo->writepos;
unsigned int writebuf = fifo->writebuf;
unsigned long flags;
int rc;
nmax = fifo->size - READ_ONCE(fifo->fill);
while (1) {
unsigned int nrail = fifo->bufsize - writepos;
unsigned int n = min(todo, nmax);
if (n == 0) {
spin_lock_irqsave(&fifo->lock, flags);
fifo->fill += done;
spin_unlock_irqrestore(&fifo->lock, flags);
fifo->writepos = writepos;
fifo->writebuf = writebuf;
return done;
}
if (n > nrail)
n = nrail;
rc = (*copier)(fifo->mem[writebuf] + writepos, data + done, n);
if (rc)
return rc;
done += n;
todo -= n;
writepos += n;
nmax -= n;
if (writepos == fifo->bufsize) {
writepos = 0;
writebuf++;
if (writebuf == fifo->bufnum)
writebuf = 0;
}
}
}
static int fifo_read(struct xillyfifo *fifo,
void *data, unsigned int len,
int (*copier)(void *, const void *, int))
{
unsigned int done = 0;
unsigned int todo = len;
unsigned int fill;
unsigned int readpos = fifo->readpos;
unsigned int readbuf = fifo->readbuf;
unsigned long flags;
int rc;
/*
* The spinlock here is necessary, because otherwise fifo->fill
* could have been increased by fifo_write() after writing data
* to the buffer, but this data would potentially not have been
* visible on this thread at the time the updated fifo->fill was.
* That could lead to reading invalid data.
*/
spin_lock_irqsave(&fifo->lock, flags);
fill = fifo->fill;
spin_unlock_irqrestore(&fifo->lock, flags);
while (1) {
unsigned int nrail = fifo->bufsize - readpos;
unsigned int n = min(todo, fill);
if (n == 0) {
spin_lock_irqsave(&fifo->lock, flags);
fifo->fill -= done;
spin_unlock_irqrestore(&fifo->lock, flags);
fifo->readpos = readpos;
fifo->readbuf = readbuf;
return done;
}
if (n > nrail)
n = nrail;
rc = (*copier)(data + done, fifo->mem[readbuf] + readpos, n);
if (rc)
return rc;
done += n;
todo -= n;
readpos += n;
fill -= n;
if (readpos == fifo->bufsize) {
readpos = 0;
readbuf++;
if (readbuf == fifo->bufnum)
readbuf = 0;
}
}
}
/*
* These three wrapper functions are used as the @copier argument to
* fifo_write() and fifo_read(), so that they can work directly with
* user memory as well.
*/
static int xilly_copy_from_user(void *dst, const void *src, int n)
{
if (copy_from_user(dst, (const void __user *)src, n))
return -EFAULT;
return 0;
}
static int xilly_copy_to_user(void *dst, const void *src, int n)
{
if (copy_to_user((void __user *)dst, src, n))
return -EFAULT;
return 0;
}
static int xilly_memcpy(void *dst, const void *src, int n)
{
memcpy(dst, src, n);
return 0;
}
static int fifo_init(struct xillyfifo *fifo,
unsigned int log2_size)
{
unsigned int log2_bufnum;
unsigned int buf_order;
int i;
unsigned int log2_fifo_buf_size;
retry:
log2_fifo_buf_size = fifo_buf_order + PAGE_SHIFT;
if (log2_size > log2_fifo_buf_size) {
log2_bufnum = log2_size - log2_fifo_buf_size;
buf_order = fifo_buf_order;
fifo->bufsize = 1 << log2_fifo_buf_size;
} else {
log2_bufnum = 0;
buf_order = (log2_size > PAGE_SHIFT) ?
log2_size - PAGE_SHIFT : 0;
fifo->bufsize = 1 << log2_size;
}
fifo->bufnum = 1 << log2_bufnum;
fifo->size = fifo->bufnum * fifo->bufsize;
fifo->buf_order = buf_order;
fifo->mem = kmalloc_array(fifo->bufnum, sizeof(void *), GFP_KERNEL);
if (!fifo->mem)
return -ENOMEM;
for (i = 0; i < fifo->bufnum; i++) {
fifo->mem[i] = (void *)
__get_free_pages(GFP_KERNEL, buf_order);
if (!fifo->mem[i])
goto memfail;
}
fifo->fill = 0;
fifo->readpos = 0;
fifo->readbuf = 0;
fifo->writepos = 0;
fifo->writebuf = 0;
spin_lock_init(&fifo->lock);
init_waitqueue_head(&fifo->waitq);
return 0;
memfail:
for (i--; i >= 0; i--)
free_pages((unsigned long)fifo->mem[i], buf_order);
kfree(fifo->mem);
fifo->mem = NULL;
if (fifo_buf_order) {
fifo_buf_order--;
goto retry;
} else {
return -ENOMEM;
}
}
static void fifo_mem_release(struct xillyfifo *fifo)
{
int i;
if (!fifo->mem)
return;
for (i = 0; i < fifo->bufnum; i++)
free_pages((unsigned long)fifo->mem[i], fifo->buf_order);
kfree(fifo->mem);
}
/*
* When endpoint_quiesce() returns, the endpoint has no URBs submitted,
* won't accept any new URB submissions, and its related work item doesn't
* and won't run anymore.
*/
static void endpoint_quiesce(struct xillyusb_endpoint *ep)
{
mutex_lock(&ep->ep_mutex);
ep->shutting_down = true;
mutex_unlock(&ep->ep_mutex);
usb_kill_anchored_urbs(&ep->anchor);
cancel_work_sync(&ep->workitem);
}
/*
* Note that endpoint_dealloc() also frees fifo memory (if allocated), even
* though endpoint_alloc doesn't allocate that memory.
*/
static void endpoint_dealloc(struct xillyusb_endpoint *ep)
{
struct list_head *this, *next;
fifo_mem_release(&ep->fifo);
/* Join @filled_buffers with @buffers to free these entries too */
list_splice(&ep->filled_buffers, &ep->buffers);
list_for_each_safe(this, next, &ep->buffers) {
struct xillybuffer *xb =
list_entry(this, struct xillybuffer, entry);
free_pages((unsigned long)xb->buf, ep->order);
kfree(xb);
}
kfree(ep);
}
static struct xillyusb_endpoint
*endpoint_alloc(struct xillyusb_dev *xdev,
u8 ep_num,
void (*work)(struct work_struct *),
unsigned int order,
int bufnum)
{
int i;
struct xillyusb_endpoint *ep;
ep = kzalloc(sizeof(*ep), GFP_KERNEL);
if (!ep)
return NULL;
INIT_LIST_HEAD(&ep->buffers);
INIT_LIST_HEAD(&ep->filled_buffers);
spin_lock_init(&ep->buffers_lock);
mutex_init(&ep->ep_mutex);
init_usb_anchor(&ep->anchor);
INIT_WORK(&ep->workitem, work);
ep->order = order;
ep->buffer_size = 1 << (PAGE_SHIFT + order);
ep->outstanding_urbs = 0;
ep->drained = true;
ep->wake_on_drain = false;
ep->xdev = xdev;
ep->ep_num = ep_num;
ep->shutting_down = false;
for (i = 0; i < bufnum; i++) {
struct xillybuffer *xb;
unsigned long addr;
xb = kzalloc(sizeof(*xb), GFP_KERNEL);
if (!xb) {
endpoint_dealloc(ep);
return NULL;
}
addr = __get_free_pages(GFP_KERNEL, order);
if (!addr) {
kfree(xb);
endpoint_dealloc(ep);
return NULL;
}
xb->buf = (void *)addr;
xb->ep = ep;
list_add_tail(&xb->entry, &ep->buffers);
}
return ep;
}
static void cleanup_dev(struct kref *kref)
{
struct xillyusb_dev *xdev =
container_of(kref, struct xillyusb_dev, kref);
if (xdev->in_ep)
endpoint_dealloc(xdev->in_ep);
if (xdev->msg_ep)
endpoint_dealloc(xdev->msg_ep);
if (xdev->workq)
destroy_workqueue(xdev->workq);
kfree(xdev->channels); /* Argument may be NULL, and that's fine */
kfree(xdev);
}
/*
* @process_in_mutex is taken to ensure that bulk_in_work() won't call
* process_bulk_in() after wakeup_all()'s execution: The latter zeroes all
* @read_data_ok entries, which will make process_bulk_in() report false
* errors if executed. The mechanism relies on that xdev->error is assigned
* a non-zero value by report_io_error() prior to queueing wakeup_all(),
* which prevents bulk_in_work() from calling process_bulk_in().
*
* The fact that wakeup_all() and bulk_in_work() are queued on the same
* workqueue makes their concurrent execution very unlikely, however the
* kernel's API doesn't seem to ensure this strictly.
*/
static void wakeup_all(struct work_struct *work)
{
int i;
struct xillyusb_dev *xdev = container_of(work, struct xillyusb_dev,
wakeup_workitem);
mutex_lock(&xdev->process_in_mutex);
for (i = 0; i < xdev->num_channels; i++) {
struct xillyusb_channel *chan = &xdev->channels[i];
mutex_lock(&chan->lock);
if (chan->in_fifo) {
/*
* Fake an EOF: Even if such arrives, it won't be
* processed.
*/
chan->read_data_ok = 0;
wake_up_interruptible(&chan->in_fifo->waitq);
}
if (chan->out_ep)
wake_up_interruptible(&chan->out_ep->fifo.waitq);
mutex_unlock(&chan->lock);
wake_up_interruptible(&chan->flushq);
}
mutex_unlock(&xdev->process_in_mutex);
wake_up_interruptible(&xdev->msg_ep->fifo.waitq);
kref_put(&xdev->kref, cleanup_dev);
}
static void report_io_error(struct xillyusb_dev *xdev,
int errcode)
{
unsigned long flags;
bool do_once = false;
spin_lock_irqsave(&xdev->error_lock, flags);
if (!xdev->error) {
xdev->error = errcode;
do_once = true;
}
spin_unlock_irqrestore(&xdev->error_lock, flags);
if (do_once) {
kref_get(&xdev->kref); /* xdev is used by work item */
queue_work(xdev->workq, &xdev->wakeup_workitem);
}
}
/*
* safely_assign_in_fifo() changes the value of chan->in_fifo and ensures
* the previous pointer is never used after its return.
*/
static void safely_assign_in_fifo(struct xillyusb_channel *chan,
struct xillyfifo *fifo)
{
mutex_lock(&chan->lock);
chan->in_fifo = fifo;
mutex_unlock(&chan->lock);
flush_work(&chan->xdev->in_ep->workitem);
}
static void bulk_in_completer(struct urb *urb)
{
struct xillybuffer *xb = urb->context;
struct xillyusb_endpoint *ep = xb->ep;
unsigned long flags;
if (urb->status) {
if (!(urb->status == -ENOENT ||
urb->status == -ECONNRESET ||
urb->status == -ESHUTDOWN))
report_io_error(ep->xdev, -EIO);
spin_lock_irqsave(&ep->buffers_lock, flags);
list_add_tail(&xb->entry, &ep->buffers);
ep->outstanding_urbs--;
spin_unlock_irqrestore(&ep->buffers_lock, flags);
return;
}
xb->len = urb->actual_length;
spin_lock_irqsave(&ep->buffers_lock, flags);
list_add_tail(&xb->entry, &ep->filled_buffers);
spin_unlock_irqrestore(&ep->buffers_lock, flags);
if (!ep->shutting_down)
queue_work(ep->xdev->workq, &ep->workitem);
}
static void bulk_out_completer(struct urb *urb)
{
struct xillybuffer *xb = urb->context;
struct xillyusb_endpoint *ep = xb->ep;
unsigned long flags;
if (urb->status &&
(!(urb->status == -ENOENT ||
urb->status == -ECONNRESET ||
urb->status == -ESHUTDOWN)))
report_io_error(ep->xdev, -EIO);
spin_lock_irqsave(&ep->buffers_lock, flags);
list_add_tail(&xb->entry, &ep->buffers);
ep->outstanding_urbs--;
spin_unlock_irqrestore(&ep->buffers_lock, flags);
if (!ep->shutting_down)
queue_work(ep->xdev->workq, &ep->workitem);
}
static void try_queue_bulk_in(struct xillyusb_endpoint *ep)
{
struct xillyusb_dev *xdev = ep->xdev;
struct xillybuffer *xb;
struct urb *urb;
int rc;
unsigned long flags;
unsigned int bufsize = ep->buffer_size;
mutex_lock(&ep->ep_mutex);
if (ep->shutting_down || xdev->error)
goto done;
while (1) {
spin_lock_irqsave(&ep->buffers_lock, flags);
if (list_empty(&ep->buffers)) {
spin_unlock_irqrestore(&ep->buffers_lock, flags);
goto done;
}
xb = list_first_entry(&ep->buffers, struct xillybuffer, entry);
list_del(&xb->entry);
ep->outstanding_urbs++;
spin_unlock_irqrestore(&ep->buffers_lock, flags);
urb = usb_alloc_urb(0, GFP_KERNEL);
if (!urb) {
report_io_error(xdev, -ENOMEM);
goto relist;
}
usb_fill_bulk_urb(urb, xdev->udev,
usb_rcvbulkpipe(xdev->udev, ep->ep_num),
xb->buf, bufsize, bulk_in_completer, xb);
usb_anchor_urb(urb, &ep->anchor);
rc = usb_submit_urb(urb, GFP_KERNEL);
if (rc) {
report_io_error(xdev, (rc == -ENOMEM) ? -ENOMEM :
-EIO);
goto unanchor;
}
usb_free_urb(urb); /* This just decrements reference count */
}
unanchor:
usb_unanchor_urb(urb);
usb_free_urb(urb);
relist:
spin_lock_irqsave(&ep->buffers_lock, flags);
list_add_tail(&xb->entry, &ep->buffers);
ep->outstanding_urbs--;
spin_unlock_irqrestore(&ep->buffers_lock, flags);
done:
mutex_unlock(&ep->ep_mutex);
}
static void try_queue_bulk_out(struct xillyusb_endpoint *ep)
{
struct xillyfifo *fifo = &ep->fifo;
struct xillyusb_dev *xdev = ep->xdev;
struct xillybuffer *xb;
struct urb *urb;
int rc;
unsigned int fill;
unsigned long flags;
bool do_wake = false;
mutex_lock(&ep->ep_mutex);
if (ep->shutting_down || xdev->error)
goto done;
fill = READ_ONCE(fifo->fill) & ep->fill_mask;
while (1) {
int count;
unsigned int max_read;
spin_lock_irqsave(&ep->buffers_lock, flags);
/*
* Race conditions might have the FIFO filled while the
* endpoint is marked as drained here. That doesn't matter,
* because the sole purpose of @drained is to ensure that
* certain data has been sent on the USB channel before
* shutting it down. Hence knowing that the FIFO appears
* to be empty with no outstanding URBs at some moment
* is good enough.
*/
if (!fill) {
ep->drained = !ep->outstanding_urbs;
if (ep->drained && ep->wake_on_drain)
do_wake = true;
spin_unlock_irqrestore(&ep->buffers_lock, flags);
goto done;
}
ep->drained = false;
if ((fill < ep->buffer_size && ep->outstanding_urbs) ||
list_empty(&ep->buffers)) {
spin_unlock_irqrestore(&ep->buffers_lock, flags);
goto done;
}
xb = list_first_entry(&ep->buffers, struct xillybuffer, entry);
list_del(&xb->entry);
ep->outstanding_urbs++;
spin_unlock_irqrestore(&ep->buffers_lock, flags);
max_read = min(fill, ep->buffer_size);
count = fifo_read(&ep->fifo, xb->buf, max_read, xilly_memcpy);
/*
* xilly_memcpy always returns 0 => fifo_read can't fail =>
* count > 0
*/
urb = usb_alloc_urb(0, GFP_KERNEL);
if (!urb) {
report_io_error(xdev, -ENOMEM);
goto relist;
}
usb_fill_bulk_urb(urb, xdev->udev,
usb_sndbulkpipe(xdev->udev, ep->ep_num),
xb->buf, count, bulk_out_completer, xb);
usb_anchor_urb(urb, &ep->anchor);
rc = usb_submit_urb(urb, GFP_KERNEL);
if (rc) {
report_io_error(xdev, (rc == -ENOMEM) ? -ENOMEM :
-EIO);
goto unanchor;
}
usb_free_urb(urb); /* This just decrements reference count */
fill -= count;
do_wake = true;
}
unanchor:
usb_unanchor_urb(urb);
usb_free_urb(urb);
relist:
spin_lock_irqsave(&ep->buffers_lock, flags);
list_add_tail(&xb->entry, &ep->buffers);
ep->outstanding_urbs--;
spin_unlock_irqrestore(&ep->buffers_lock, flags);
done:
mutex_unlock(&ep->ep_mutex);
if (do_wake)
wake_up_interruptible(&fifo->waitq);
}
static void bulk_out_work(struct work_struct *work)
{
struct xillyusb_endpoint *ep = container_of(work,
struct xillyusb_endpoint,
workitem);
try_queue_bulk_out(ep);
}
static int process_in_opcode(struct xillyusb_dev *xdev,
int opcode,
int chan_num)
{
struct xillyusb_channel *chan;
struct device *dev = xdev->dev;
int chan_idx = chan_num >> 1;
if (chan_idx >= xdev->num_channels) {
dev_err(dev, "Received illegal channel ID %d from FPGA\n",
chan_num);
return -EIO;
}
chan = &xdev->channels[chan_idx];
switch (opcode) {
case OPCODE_EOF:
if (!chan->read_data_ok) {
dev_err(dev, "Received unexpected EOF for channel %d\n",
chan_num);
return -EIO;
}
/*
* A write memory barrier ensures that the FIFO's fill level
* is visible before read_data_ok turns zero, so the data in
* the FIFO isn't missed by the consumer.
*/
smp_wmb();
WRITE_ONCE(chan->read_data_ok, 0);
wake_up_interruptible(&chan->in_fifo->waitq);
break;
case OPCODE_REACHED_CHECKPOINT:
chan->flushing = 0;
wake_up_interruptible(&chan->flushq);
break;
case OPCODE_CANCELED_CHECKPOINT:
chan->canceled = 1;
wake_up_interruptible(&chan->flushq);
break;
default:
dev_err(dev, "Received illegal opcode %d from FPGA\n",
opcode);
return -EIO;
}
return 0;
}
static int process_bulk_in(struct xillybuffer *xb)
{
struct xillyusb_endpoint *ep = xb->ep;
struct xillyusb_dev *xdev = ep->xdev;
struct device *dev = xdev->dev;
int dws = xb->len >> 2;
__le32 *p = xb->buf;
u32 ctrlword;
struct xillyusb_channel *chan;
struct xillyfifo *fifo;
int chan_num = 0, opcode;
int chan_idx;
int bytes, count, dwconsume;
int in_bytes_left = 0;
int rc;
if ((dws << 2) != xb->len) {
dev_err(dev, "Received BULK IN transfer with %d bytes, not a multiple of 4\n",
xb->len);
return -EIO;
}
if (xdev->in_bytes_left) {
bytes = min(xdev->in_bytes_left, dws << 2);
in_bytes_left = xdev->in_bytes_left - bytes;
chan_num = xdev->leftover_chan_num;
goto resume_leftovers;
}
while (dws) {
ctrlword = le32_to_cpu(*p++);
dws--;
chan_num = ctrlword & 0xfff;
count = (ctrlword >> 12) & 0x3ff;
opcode = (ctrlword >> 24) & 0xf;
if (opcode != OPCODE_DATA) {
unsigned int in_counter = xdev->in_counter++ & 0x3ff;
if (count != in_counter) {
dev_err(dev, "Expected opcode counter %d, got %d\n",
in_counter, count);
return -EIO;
}
rc = process_in_opcode(xdev, opcode, chan_num);
if (rc)
return rc;
continue;
}
bytes = min(count + 1, dws << 2);
in_bytes_left = count + 1 - bytes;
resume_leftovers:
chan_idx = chan_num >> 1;
if (!(chan_num & 1) || chan_idx >= xdev->num_channels ||
!xdev->channels[chan_idx].read_data_ok) {
dev_err(dev, "Received illegal channel ID %d from FPGA\n",
chan_num);
return -EIO;
}
chan = &xdev->channels[chan_idx];
fifo = chan->in_fifo;
if (unlikely(!fifo))
return -EIO; /* We got really unexpected data */
if (bytes != fifo_write(fifo, p, bytes, xilly_memcpy)) {
dev_err(dev, "Misbehaving FPGA overflowed an upstream FIFO!\n");
return -EIO;
}
wake_up_interruptible(&fifo->waitq);
dwconsume = (bytes + 3) >> 2;
dws -= dwconsume;
p += dwconsume;
}
xdev->in_bytes_left = in_bytes_left;
xdev->leftover_chan_num = chan_num;
return 0;
}
static void bulk_in_work(struct work_struct *work)
{
struct xillyusb_endpoint *ep =
container_of(work, struct xillyusb_endpoint, workitem);
struct xillyusb_dev *xdev = ep->xdev;
unsigned long flags;
struct xillybuffer *xb;
bool consumed = false;
int rc = 0;
mutex_lock(&xdev->process_in_mutex);
spin_lock_irqsave(&ep->buffers_lock, flags);
while (1) {
if (rc || list_empty(&ep->filled_buffers)) {
spin_unlock_irqrestore(&ep->buffers_lock, flags);
mutex_unlock(&xdev->process_in_mutex);
if (rc)
report_io_error(xdev, rc);
else if (consumed)
try_queue_bulk_in(ep);
return;
}
xb = list_first_entry(&ep->filled_buffers, struct xillybuffer,
entry);
list_del(&xb->entry);
spin_unlock_irqrestore(&ep->buffers_lock, flags);
consumed = true;
if (!xdev->error)
rc = process_bulk_in(xb);
spin_lock_irqsave(&ep->buffers_lock, flags);
list_add_tail(&xb->entry, &ep->buffers);
ep->outstanding_urbs--;
}
}
static int xillyusb_send_opcode(struct xillyusb_dev *xdev,
int chan_num, char opcode, u32 data)
{
struct xillyusb_endpoint *ep = xdev->msg_ep;
struct xillyfifo *fifo = &ep->fifo;
__le32 msg[2];
int rc = 0;
msg[0] = cpu_to_le32((chan_num & 0xfff) |
((opcode & 0xf) << 24));
msg[1] = cpu_to_le32(data);
mutex_lock(&xdev->msg_mutex);
/*
* The wait queue is woken with the interruptible variant, so the
* wait function matches, however returning because of an interrupt
* will mess things up considerably, in particular when the caller is
* the release method. And the xdev->error part prevents being stuck
* forever in the event of a bizarre hardware bug: Pull the USB plug.
*/
while (wait_event_interruptible(fifo->waitq,
fifo->fill <= (fifo->size - 8) ||
xdev->error))
; /* Empty loop */
if (xdev->error) {
rc = xdev->error;
goto unlock_done;
}
fifo_write(fifo, (void *)msg, 8, xilly_memcpy);
try_queue_bulk_out(ep);
unlock_done:
mutex_unlock(&xdev->msg_mutex);
return rc;
}
/*
* Note that flush_downstream() merely waits for the data to arrive to
* the application logic at the FPGA -- unlike PCIe Xillybus' counterpart,
* it does nothing to make it happen (and neither is it necessary).
*
* This function is not reentrant for the same @chan, but this is covered
* by the fact that for any given @chan, it's called either by the open,
* write, llseek and flush fops methods, which can't run in parallel (and the
* write + flush and llseek method handlers are protected with out_mutex).
*
* chan->flushed is there to avoid multiple flushes at the same position,
* in particular as a result of programs that close the file descriptor
* e.g. after a dup2() for redirection.
*/
static int flush_downstream(struct xillyusb_channel *chan,
long timeout,
bool interruptible)
{
struct xillyusb_dev *xdev = chan->xdev;
int chan_num = chan->chan_idx << 1;
long deadline, left_to_sleep;
int rc;
if (chan->flushed)
return 0;
deadline = jiffies + 1 + timeout;
if (chan->flushing) {
long cancel_deadline = jiffies + 1 + XILLY_RESPONSE_TIMEOUT;
chan->canceled = 0;
rc = xillyusb_send_opcode(xdev, chan_num,
OPCODE_CANCEL_CHECKPOINT, 0);
if (rc)
return rc; /* Only real error, never -EINTR */
/* Ignoring interrupts. Cancellation must be handled */
while (!chan->canceled) {
left_to_sleep = cancel_deadline - ((long)jiffies);
if (left_to_sleep <= 0) {
report_io_error(xdev, -EIO);
return -EIO;
}
rc = wait_event_interruptible_timeout(chan->flushq,
chan->canceled ||
xdev->error,
left_to_sleep);
if (xdev->error)
return xdev->error;
}
}
chan->flushing = 1;
/*
* The checkpoint is given in terms of data elements, not bytes. As
* a result, if less than an element's worth of data is stored in the
* FIFO, it's not flushed, including the flush before closing, which
* means that such data is lost. This is consistent with PCIe Xillybus.
*/
rc = xillyusb_send_opcode(xdev, chan_num,
OPCODE_SET_CHECKPOINT,
chan->out_bytes >>
chan->out_log2_element_size);
if (rc)
return rc; /* Only real error, never -EINTR */
if (!timeout) {
while (chan->flushing) {
rc = wait_event_interruptible(chan->flushq,
!chan->flushing ||
xdev->error);
if (xdev->error)
return xdev->error;
if (interruptible && rc)
return -EINTR;
}
goto done;
}
while (chan->flushing) {
left_to_sleep = deadline - ((long)jiffies);
if (left_to_sleep <= 0)
return -ETIMEDOUT;
rc = wait_event_interruptible_timeout(chan->flushq,
!chan->flushing ||
xdev->error,
left_to_sleep);
if (xdev->error)
return xdev->error;
if (interruptible && rc < 0)
return -EINTR;
}
done:
chan->flushed = 1;
return 0;
}
/* request_read_anything(): Ask the FPGA for any little amount of data */
static int request_read_anything(struct xillyusb_channel *chan,
char opcode)
{
struct xillyusb_dev *xdev = chan->xdev;
unsigned int sh = chan->in_log2_element_size;
int chan_num = (chan->chan_idx << 1) | 1;
u32 mercy = chan->in_consumed_bytes + (2 << sh) - 1;
return xillyusb_send_opcode(xdev, chan_num, opcode, mercy >> sh);
}
static int xillyusb_open(struct inode *inode, struct file *filp)
{
struct xillyusb_dev *xdev;
struct xillyusb_channel *chan;
struct xillyfifo *in_fifo = NULL;
struct xillyusb_endpoint *out_ep = NULL;
int rc;
int index;
rc = xillybus_find_inode(inode, (void **)&xdev, &index);
if (rc)
return rc;
chan = &xdev->channels[index];
filp->private_data = chan;
mutex_lock(&chan->lock);
rc = -ENODEV;
if (xdev->error)
goto unmutex_fail;
if (((filp->f_mode & FMODE_READ) && !chan->readable) ||
((filp->f_mode & FMODE_WRITE) && !chan->writable))
goto unmutex_fail;
if ((filp->f_flags & O_NONBLOCK) && (filp->f_mode & FMODE_READ) &&
chan->in_synchronous) {
dev_err(xdev->dev,
"open() failed: O_NONBLOCK not allowed for read on this device\n");
goto unmutex_fail;
}
if ((filp->f_flags & O_NONBLOCK) && (filp->f_mode & FMODE_WRITE) &&
chan->out_synchronous) {
dev_err(xdev->dev,
"open() failed: O_NONBLOCK not allowed for write on this device\n");
goto unmutex_fail;
}
rc = -EBUSY;
if (((filp->f_mode & FMODE_READ) && chan->open_for_read) ||
((filp->f_mode & FMODE_WRITE) && chan->open_for_write))
goto unmutex_fail;
kref_get(&xdev->kref);
if (filp->f_mode & FMODE_READ)
chan->open_for_read = 1;
if (filp->f_mode & FMODE_WRITE)
chan->open_for_write = 1;
mutex_unlock(&chan->lock);
if (filp->f_mode & FMODE_WRITE) {
out_ep = endpoint_alloc(xdev,
(chan->chan_idx + 2) | USB_DIR_OUT,
bulk_out_work, BUF_SIZE_ORDER, BUFNUM);
if (!out_ep) {
rc = -ENOMEM;
goto unopen;
}
rc = fifo_init(&out_ep->fifo, chan->out_log2_fifo_size);
if (rc)
goto late_unopen;
out_ep->fill_mask = -(1 << chan->out_log2_element_size);
chan->out_bytes = 0;
chan->flushed = 0;
/*
* Sending a flush request to a previously closed stream
* effectively opens it, and also waits until the command is
* confirmed by the FPGA. The latter is necessary because the
* data is sent through a separate BULK OUT endpoint, and the
* xHCI controller is free to reorder transmissions.
*
* This can't go wrong unless there's a serious hardware error
* (or the computer is stuck for 500 ms?)
*/
rc = flush_downstream(chan, XILLY_RESPONSE_TIMEOUT, false);
if (rc == -ETIMEDOUT) {
rc = -EIO;
report_io_error(xdev, rc);
}
if (rc)
goto late_unopen;
}
if (filp->f_mode & FMODE_READ) {
in_fifo = kzalloc(sizeof(*in_fifo), GFP_KERNEL);
if (!in_fifo) {
rc = -ENOMEM;
goto late_unopen;
}
rc = fifo_init(in_fifo, chan->in_log2_fifo_size);
if (rc) {
kfree(in_fifo);
goto late_unopen;
}
}
mutex_lock(&chan->lock);
if (in_fifo) {
chan->in_fifo = in_fifo;
chan->read_data_ok = 1;
}
if (out_ep)
chan->out_ep = out_ep;
mutex_unlock(&chan->lock);
if (in_fifo) {
u32 in_checkpoint = 0;
if (!chan->in_synchronous)
in_checkpoint = in_fifo->size >>
chan->in_log2_element_size;
chan->in_consumed_bytes = 0;
chan->poll_used = 0;
chan->in_current_checkpoint = in_checkpoint;
rc = xillyusb_send_opcode(xdev, (chan->chan_idx << 1) | 1,
OPCODE_SET_CHECKPOINT,
in_checkpoint);
if (rc) /* Failure guarantees that opcode wasn't sent */
goto unfifo;
/*
* In non-blocking mode, request the FPGA to send any data it
* has right away. Otherwise, the first read() will always
* return -EAGAIN, which is OK strictly speaking, but ugly.
* Checking and unrolling if this fails isn't worth the
* effort -- the error is propagated to the first read()
* anyhow.
*/
if (filp->f_flags & O_NONBLOCK)
request_read_anything(chan, OPCODE_SET_PUSH);
}
return 0;
unfifo:
chan->read_data_ok = 0;
safely_assign_in_fifo(chan, NULL);
fifo_mem_release(in_fifo);
kfree(in_fifo);
if (out_ep) {
mutex_lock(&chan->lock);
chan->out_ep = NULL;
mutex_unlock(&chan->lock);
}
late_unopen:
if (out_ep)
endpoint_dealloc(out_ep);
unopen:
mutex_lock(&chan->lock);
if (filp->f_mode & FMODE_READ)
chan->open_for_read = 0;
if (filp->f_mode & FMODE_WRITE)
chan->open_for_write = 0;
mutex_unlock(&chan->lock);
kref_put(&xdev->kref, cleanup_dev);
return rc;
unmutex_fail:
mutex_unlock(&chan->lock);
return rc;
}
static ssize_t xillyusb_read(struct file *filp, char __user *userbuf,
size_t count, loff_t *f_pos)
{
struct xillyusb_channel *chan = filp->private_data;
struct xillyusb_dev *xdev = chan->xdev;
struct xillyfifo *fifo = chan->in_fifo;
int chan_num = (chan->chan_idx << 1) | 1;
long deadline, left_to_sleep;
int bytes_done = 0;
bool sent_set_push = false;
int rc;
deadline = jiffies + 1 + XILLY_RX_TIMEOUT;
rc = mutex_lock_interruptible(&chan->in_mutex);
if (rc)
return rc;
while (1) {
u32 fifo_checkpoint_bytes, complete_checkpoint_bytes;
u32 complete_checkpoint, fifo_checkpoint;
u32 checkpoint;
s32 diff, leap;
unsigned int sh = chan->in_log2_element_size;
bool checkpoint_for_complete;
rc = fifo_read(fifo, (__force void *)userbuf + bytes_done,
count - bytes_done, xilly_copy_to_user);
if (rc < 0)
break;
bytes_done += rc;
chan->in_consumed_bytes += rc;
left_to_sleep = deadline - ((long)jiffies);
/*
* Some 32-bit arithmetic that may wrap. Note that
* complete_checkpoint is rounded up to the closest element
* boundary, because the read() can't be completed otherwise.
* fifo_checkpoint_bytes is rounded down, because it protects
* in_fifo from overflowing.
*/
fifo_checkpoint_bytes = chan->in_consumed_bytes + fifo->size;
complete_checkpoint_bytes =
chan->in_consumed_bytes + count - bytes_done;
fifo_checkpoint = fifo_checkpoint_bytes >> sh;
complete_checkpoint =
(complete_checkpoint_bytes + (1 << sh) - 1) >> sh;
diff = (fifo_checkpoint - complete_checkpoint) << sh;
if (chan->in_synchronous && diff >= 0) {
checkpoint = complete_checkpoint;
checkpoint_for_complete = true;
} else {
checkpoint = fifo_checkpoint;
checkpoint_for_complete = false;
}
leap = (checkpoint - chan->in_current_checkpoint) << sh;
/*
* To prevent flooding of OPCODE_SET_CHECKPOINT commands as
* data is consumed, it's issued only if it moves the
* checkpoint by at least an 8th of the FIFO's size, or if
* it's necessary to complete the number of bytes requested by
* the read() call.
*
* chan->read_data_ok is checked to spare an unnecessary
* submission after receiving EOF, however it's harmless if
* such slips away.
*/
if (chan->read_data_ok &&
(leap > (fifo->size >> 3) ||
(checkpoint_for_complete && leap > 0))) {
chan->in_current_checkpoint = checkpoint;
rc = xillyusb_send_opcode(xdev, chan_num,
OPCODE_SET_CHECKPOINT,
checkpoint);
if (rc)
break;
}
if (bytes_done == count ||
(left_to_sleep <= 0 && bytes_done))
break;
/*
* Reaching here means that the FIFO was empty when
* fifo_read() returned, but not necessarily right now. Error
* and EOF are checked and reported only now, so that no data
* that managed its way to the FIFO is lost.
*/
if (!READ_ONCE(chan->read_data_ok)) { /* FPGA has sent EOF */
/* Has data slipped into the FIFO since fifo_read()? */
smp_rmb();
if (READ_ONCE(fifo->fill))
continue;
rc = 0;
break;
}
if (xdev->error) {
rc = xdev->error;
break;
}
if (filp->f_flags & O_NONBLOCK) {
rc = -EAGAIN;
break;
}
if (!sent_set_push) {
rc = xillyusb_send_opcode(xdev, chan_num,
OPCODE_SET_PUSH,
complete_checkpoint);
if (rc)
break;
sent_set_push = true;
}
if (left_to_sleep > 0) {
/*
* Note that when xdev->error is set (e.g. when the
* device is unplugged), read_data_ok turns zero and
* fifo->waitq is awaken.
* Therefore no special attention to xdev->error.
*/
rc = wait_event_interruptible_timeout
(fifo->waitq,
fifo->fill || !chan->read_data_ok,
left_to_sleep);
} else { /* bytes_done == 0 */
/* Tell FPGA to send anything it has */
rc = request_read_anything(chan, OPCODE_UPDATE_PUSH);
if (rc)
break;
rc = wait_event_interruptible
(fifo->waitq,
fifo->fill || !chan->read_data_ok);
}
if (rc < 0) {
rc = -EINTR;
break;
}
}
if (((filp->f_flags & O_NONBLOCK) || chan->poll_used) &&
!READ_ONCE(fifo->fill))
request_read_anything(chan, OPCODE_SET_PUSH);
mutex_unlock(&chan->in_mutex);
if (bytes_done)
return bytes_done;
return rc;
}
static int xillyusb_flush(struct file *filp, fl_owner_t id)
{
struct xillyusb_channel *chan = filp->private_data;
int rc;
if (!(filp->f_mode & FMODE_WRITE))
return 0;
rc = mutex_lock_interruptible(&chan->out_mutex);
if (rc)
return rc;
/*
* One second's timeout on flushing. Interrupts are ignored, because if
* the user pressed CTRL-C, that interrupt will still be in flight by
* the time we reach here, and the opportunity to flush is lost.
*/
rc = flush_downstream(chan, HZ, false);
mutex_unlock(&chan->out_mutex);
if (rc == -ETIMEDOUT) {
/* The things you do to use dev_warn() and not pr_warn() */
struct xillyusb_dev *xdev = chan->xdev;
mutex_lock(&chan->lock);
if (!xdev->error)
dev_warn(xdev->dev,
"Timed out while flushing. Output data may be lost.\n");
mutex_unlock(&chan->lock);
}
return rc;
}
static ssize_t xillyusb_write(struct file *filp, const char __user *userbuf,
size_t count, loff_t *f_pos)
{
struct xillyusb_channel *chan = filp->private_data;
struct xillyusb_dev *xdev = chan->xdev;
struct xillyfifo *fifo = &chan->out_ep->fifo;
int rc;
rc = mutex_lock_interruptible(&chan->out_mutex);
if (rc)
return rc;
while (1) {
if (xdev->error) {
rc = xdev->error;
break;
}
if (count == 0)
break;
rc = fifo_write(fifo, (__force void *)userbuf, count,
xilly_copy_from_user);
if (rc != 0)
break;
if (filp->f_flags & O_NONBLOCK) {
rc = -EAGAIN;
break;
}
if (wait_event_interruptible
(fifo->waitq,
fifo->fill != fifo->size || xdev->error)) {
rc = -EINTR;
break;
}
}
if (rc < 0)
goto done;
chan->out_bytes += rc;
if (rc) {
try_queue_bulk_out(chan->out_ep);
chan->flushed = 0;
}
if (chan->out_synchronous) {
int flush_rc = flush_downstream(chan, 0, true);
if (flush_rc && !rc)
rc = flush_rc;
}
done:
mutex_unlock(&chan->out_mutex);
return rc;
}
static int xillyusb_release(struct inode *inode, struct file *filp)
{
struct xillyusb_channel *chan = filp->private_data;
struct xillyusb_dev *xdev = chan->xdev;
int rc_read = 0, rc_write = 0;
if (filp->f_mode & FMODE_READ) {
struct xillyfifo *in_fifo = chan->in_fifo;
rc_read = xillyusb_send_opcode(xdev, (chan->chan_idx << 1) | 1,
OPCODE_CLOSE, 0);
/*
* If rc_read is nonzero, xdev->error indicates a global
* device error. The error is reported later, so that
* resources are freed.
*
* Looping on wait_event_interruptible() kinda breaks the idea
* of being interruptible, and this should have been
* wait_event(). Only it's being waken with
* wake_up_interruptible() for the sake of other uses. If
* there's a global device error, chan->read_data_ok is
* deasserted and the wait queue is awaken, so this is covered.
*/
while (wait_event_interruptible(in_fifo->waitq,
!chan->read_data_ok))
; /* Empty loop */
safely_assign_in_fifo(chan, NULL);
fifo_mem_release(in_fifo);
kfree(in_fifo);
mutex_lock(&chan->lock);
chan->open_for_read = 0;
mutex_unlock(&chan->lock);
}
if (filp->f_mode & FMODE_WRITE) {
struct xillyusb_endpoint *ep = chan->out_ep;
/*
* chan->flushing isn't zeroed. If the pre-release flush timed
* out, a cancel request will be sent before the next
* OPCODE_SET_CHECKPOINT (i.e. when the file is opened again).
* This is despite that the FPGA forgets about the checkpoint
* request as the file closes. Still, in an exceptional race
* condition, the FPGA could send an OPCODE_REACHED_CHECKPOINT
* just before closing that would reach the host after the
* file has re-opened.
*/
mutex_lock(&chan->lock);
chan->out_ep = NULL;
mutex_unlock(&chan->lock);
endpoint_quiesce(ep);
endpoint_dealloc(ep);
/* See comments on rc_read above */
rc_write = xillyusb_send_opcode(xdev, chan->chan_idx << 1,
OPCODE_CLOSE, 0);
mutex_lock(&chan->lock);
chan->open_for_write = 0;
mutex_unlock(&chan->lock);
}
kref_put(&xdev->kref, cleanup_dev);
return rc_read ? rc_read : rc_write;
}
/*
* Xillybus' API allows device nodes to be seekable, giving the user
* application access to a RAM array on the FPGA (or logic emulating it).
*/
static loff_t xillyusb_llseek(struct file *filp, loff_t offset, int whence)
{
struct xillyusb_channel *chan = filp->private_data;
struct xillyusb_dev *xdev = chan->xdev;
loff_t pos = filp->f_pos;
int rc = 0;
unsigned int log2_element_size = chan->readable ?
chan->in_log2_element_size : chan->out_log2_element_size;
/*
* Take both mutexes not allowing interrupts, since it seems like
* common applications don't expect an -EINTR here. Besides, multiple
* access to a single file descriptor on seekable devices is a mess
* anyhow.
*/
mutex_lock(&chan->out_mutex);
mutex_lock(&chan->in_mutex);
switch (whence) {
case SEEK_SET:
pos = offset;
break;
case SEEK_CUR:
pos += offset;
break;
case SEEK_END:
pos = offset; /* Going to the end => to the beginning */
break;
default:
rc = -EINVAL;
goto end;
}
/* In any case, we must finish on an element boundary */
if (pos & ((1 << log2_element_size) - 1)) {
rc = -EINVAL;
goto end;
}
rc = xillyusb_send_opcode(xdev, chan->chan_idx << 1,
OPCODE_SET_ADDR,
pos >> log2_element_size);
if (rc)
goto end;
if (chan->writable) {
chan->flushed = 0;
rc = flush_downstream(chan, HZ, false);
}
end:
mutex_unlock(&chan->out_mutex);
mutex_unlock(&chan->in_mutex);
if (rc) /* Return error after releasing mutexes */
return rc;
filp->f_pos = pos;
return pos;
}
static __poll_t xillyusb_poll(struct file *filp, poll_table *wait)
{
struct xillyusb_channel *chan = filp->private_data;
__poll_t mask = 0;
if (chan->in_fifo)
poll_wait(filp, &chan->in_fifo->waitq, wait);
if (chan->out_ep)
poll_wait(filp, &chan->out_ep->fifo.waitq, wait);
/*
* If this is the first time poll() is called, and the file is
* readable, set the relevant flag. Also tell the FPGA to send all it
* has, to kickstart the mechanism that ensures there's always some
* data in in_fifo unless the stream is dry end-to-end. Note that the
* first poll() may not return a EPOLLIN, even if there's data on the
* FPGA. Rather, the data will arrive soon, and trigger the relevant
* wait queue.
*/
if (!chan->poll_used && chan->in_fifo) {
chan->poll_used = 1;
request_read_anything(chan, OPCODE_SET_PUSH);
}
/*
* poll() won't play ball regarding read() channels which
* are synchronous. Allowing that will create situations where data has
* been delivered at the FPGA, and users expecting select() to wake up,
* which it may not. So make it never work.
*/
if (chan->in_fifo && !chan->in_synchronous &&
(READ_ONCE(chan->in_fifo->fill) || !chan->read_data_ok))
mask |= EPOLLIN | EPOLLRDNORM;
if (chan->out_ep &&
(READ_ONCE(chan->out_ep->fifo.fill) != chan->out_ep->fifo.size))
mask |= EPOLLOUT | EPOLLWRNORM;
if (chan->xdev->error)
mask |= EPOLLERR;
return mask;
}
static const struct file_operations xillyusb_fops = {
.owner = THIS_MODULE,
.read = xillyusb_read,
.write = xillyusb_write,
.open = xillyusb_open,
.flush = xillyusb_flush,
.release = xillyusb_release,
.llseek = xillyusb_llseek,
.poll = xillyusb_poll,
};
static int xillyusb_setup_base_eps(struct xillyusb_dev *xdev)
{
xdev->msg_ep = endpoint_alloc(xdev, MSG_EP_NUM | USB_DIR_OUT,
bulk_out_work, 1, 2);
if (!xdev->msg_ep)
return -ENOMEM;
if (fifo_init(&xdev->msg_ep->fifo, 13)) /* 8 kiB */
goto dealloc;
xdev->msg_ep->fill_mask = -8; /* 8 bytes granularity */
xdev->in_ep = endpoint_alloc(xdev, IN_EP_NUM | USB_DIR_IN,
bulk_in_work, BUF_SIZE_ORDER, BUFNUM);
if (!xdev->in_ep)
goto dealloc;
try_queue_bulk_in(xdev->in_ep);
return 0;
dealloc:
endpoint_dealloc(xdev->msg_ep); /* Also frees FIFO mem if allocated */
xdev->msg_ep = NULL;
return -ENOMEM;
}
static int setup_channels(struct xillyusb_dev *xdev,
__le16 *chandesc,
int num_channels)
{
struct xillyusb_channel *chan;
int i;
chan = kcalloc(num_channels, sizeof(*chan), GFP_KERNEL);
if (!chan)
return -ENOMEM;
xdev->channels = chan;
for (i = 0; i < num_channels; i++, chan++) {
unsigned int in_desc = le16_to_cpu(*chandesc++);
unsigned int out_desc = le16_to_cpu(*chandesc++);
chan->xdev = xdev;
mutex_init(&chan->in_mutex);
mutex_init(&chan->out_mutex);
mutex_init(&chan->lock);
init_waitqueue_head(&chan->flushq);
chan->chan_idx = i;
if (in_desc & 0x80) { /* Entry is valid */
chan->readable = 1;
chan->in_synchronous = !!(in_desc & 0x40);
chan->in_seekable = !!(in_desc & 0x20);
chan->in_log2_element_size = in_desc & 0x0f;
chan->in_log2_fifo_size = ((in_desc >> 8) & 0x1f) + 16;
}
/*
* A downstream channel should never exist above index 13,
* as it would request a nonexistent BULK endpoint > 15.
* In the peculiar case that it does, it's ignored silently.
*/
if ((out_desc & 0x80) && i < 14) { /* Entry is valid */
chan->writable = 1;
chan->out_synchronous = !!(out_desc & 0x40);
chan->out_seekable = !!(out_desc & 0x20);
chan->out_log2_element_size = out_desc & 0x0f;
chan->out_log2_fifo_size =
((out_desc >> 8) & 0x1f) + 16;
}
}
return 0;
}
static int xillyusb_discovery(struct usb_interface *interface)
{
int rc;
struct xillyusb_dev *xdev = usb_get_intfdata(interface);
__le16 bogus_chandesc[2];
struct xillyfifo idt_fifo;
struct xillyusb_channel *chan;
unsigned int idt_len, names_offset;
unsigned char *idt;
int num_channels;
rc = xillyusb_send_opcode(xdev, ~0, OPCODE_QUIESCE, 0);
if (rc) {
dev_err(&interface->dev, "Failed to send quiesce request. Aborting.\n");
return rc;
}
/* Phase I: Set up one fake upstream channel and obtain IDT */
/* Set up a fake IDT with one async IN stream */
bogus_chandesc[0] = cpu_to_le16(0x80);
bogus_chandesc[1] = cpu_to_le16(0);
rc = setup_channels(xdev, bogus_chandesc, 1);
if (rc)
return rc;
rc = fifo_init(&idt_fifo, LOG2_IDT_FIFO_SIZE);
if (rc)
return rc;
chan = xdev->channels;
chan->in_fifo = &idt_fifo;
chan->read_data_ok = 1;
xdev->num_channels = 1;
rc = xillyusb_send_opcode(xdev, ~0, OPCODE_REQ_IDT, 0);
if (rc) {
dev_err(&interface->dev, "Failed to send IDT request. Aborting.\n");
goto unfifo;
}
rc = wait_event_interruptible_timeout(idt_fifo.waitq,
!chan->read_data_ok,
XILLY_RESPONSE_TIMEOUT);
if (xdev->error) {
rc = xdev->error;
goto unfifo;
}
if (rc < 0) {
rc = -EINTR; /* Interrupt on probe method? Interesting. */
goto unfifo;
}
if (chan->read_data_ok) {
rc = -ETIMEDOUT;
dev_err(&interface->dev, "No response from FPGA. Aborting.\n");
goto unfifo;
}
idt_len = READ_ONCE(idt_fifo.fill);
idt = kmalloc(idt_len, GFP_KERNEL);
if (!idt) {
rc = -ENOMEM;
goto unfifo;
}
fifo_read(&idt_fifo, idt, idt_len, xilly_memcpy);
if (crc32_le(~0, idt, idt_len) != 0) {
dev_err(&interface->dev, "IDT failed CRC check. Aborting.\n");
rc = -ENODEV;
goto unidt;
}
if (*idt > 0x90) {
dev_err(&interface->dev, "No support for IDT version 0x%02x. Maybe the xillyusb driver needs an upgrade. Aborting.\n",
(int)*idt);
rc = -ENODEV;
goto unidt;
}
/* Phase II: Set up the streams as defined in IDT */
num_channels = le16_to_cpu(*((__le16 *)(idt + 1)));
names_offset = 3 + num_channels * 4;
idt_len -= 4; /* Exclude CRC */
if (idt_len < names_offset) {
dev_err(&interface->dev, "IDT too short. This is exceptionally weird, because its CRC is OK\n");
rc = -ENODEV;
goto unidt;
}
rc = setup_channels(xdev, (void *)idt + 3, num_channels);
if (rc)
goto unidt;
/*
* Except for wildly misbehaving hardware, or if it was disconnected
* just after responding with the IDT, there is no reason for any
* work item to be running now. To be sure that xdev->channels
* is updated on anything that might run in parallel, flush the
* workqueue, which rarely does anything.
*/
flush_workqueue(xdev->workq);
xdev->num_channels = num_channels;
fifo_mem_release(&idt_fifo);
kfree(chan);
rc = xillybus_init_chrdev(&interface->dev, &xillyusb_fops,
THIS_MODULE, xdev,
idt + names_offset,
idt_len - names_offset,
num_channels,
xillyname, true);
kfree(idt);
return rc;
unidt:
kfree(idt);
unfifo:
safely_assign_in_fifo(chan, NULL);
fifo_mem_release(&idt_fifo);
return rc;
}
static int xillyusb_probe(struct usb_interface *interface,
const struct usb_device_id *id)
{
struct xillyusb_dev *xdev;
int rc;
xdev = kzalloc(sizeof(*xdev), GFP_KERNEL);
if (!xdev)
return -ENOMEM;
kref_init(&xdev->kref);
mutex_init(&xdev->process_in_mutex);
mutex_init(&xdev->msg_mutex);
xdev->udev = usb_get_dev(interface_to_usbdev(interface));
xdev->dev = &interface->dev;
xdev->error = 0;
spin_lock_init(&xdev->error_lock);
xdev->in_counter = 0;
xdev->in_bytes_left = 0;
xdev->workq = alloc_workqueue(xillyname, WQ_HIGHPRI, 0);
if (!xdev->workq) {
dev_err(&interface->dev, "Failed to allocate work queue\n");
rc = -ENOMEM;
goto fail;
}
INIT_WORK(&xdev->wakeup_workitem, wakeup_all);
usb_set_intfdata(interface, xdev);
rc = xillyusb_setup_base_eps(xdev);
if (rc)
goto fail;
rc = xillyusb_discovery(interface);
if (rc)
goto latefail;
return 0;
latefail:
endpoint_quiesce(xdev->in_ep);
endpoint_quiesce(xdev->msg_ep);
fail:
usb_set_intfdata(interface, NULL);
kref_put(&xdev->kref, cleanup_dev);
return rc;
}
static void xillyusb_disconnect(struct usb_interface *interface)
{
struct xillyusb_dev *xdev = usb_get_intfdata(interface);
struct xillyusb_endpoint *msg_ep = xdev->msg_ep;
struct xillyfifo *fifo = &msg_ep->fifo;
int rc;
int i;
xillybus_cleanup_chrdev(xdev, &interface->dev);
/*
* Try to send OPCODE_QUIESCE, which will fail silently if the device
* was disconnected, but makes sense on module unload.
*/
msg_ep->wake_on_drain = true;
xillyusb_send_opcode(xdev, ~0, OPCODE_QUIESCE, 0);
/*
* If the device has been disconnected, sending the opcode causes
* a global device error with xdev->error, if such error didn't
* occur earlier. Hence timing out means that the USB link is fine,
* but somehow the message wasn't sent. Should never happen.
*/
rc = wait_event_interruptible_timeout(fifo->waitq,
msg_ep->drained || xdev->error,
XILLY_RESPONSE_TIMEOUT);
if (!rc)
dev_err(&interface->dev,
"Weird timeout condition on sending quiesce request.\n");
report_io_error(xdev, -ENODEV); /* Discourage further activity */
/*
* This device driver is declared with soft_unbind set, or else
* sending OPCODE_QUIESCE above would always fail. The price is
* that the USB framework didn't kill outstanding URBs, so it has
* to be done explicitly before returning from this call.
*/
for (i = 0; i < xdev->num_channels; i++) {
struct xillyusb_channel *chan = &xdev->channels[i];
/*
* Lock taken to prevent chan->out_ep from changing. It also
* ensures xillyusb_open() and xillyusb_flush() don't access
* xdev->dev after being nullified below.
*/
mutex_lock(&chan->lock);
if (chan->out_ep)
endpoint_quiesce(chan->out_ep);
mutex_unlock(&chan->lock);
}
endpoint_quiesce(xdev->in_ep);
endpoint_quiesce(xdev->msg_ep);
usb_set_intfdata(interface, NULL);
xdev->dev = NULL;
kref_put(&xdev->kref, cleanup_dev);
}
static struct usb_driver xillyusb_driver = {
.name = xillyname,
.id_table = xillyusb_table,
.probe = xillyusb_probe,
.disconnect = xillyusb_disconnect,
.soft_unbind = 1,
};
static int __init xillyusb_init(void)
{
int rc = 0;
if (LOG2_INITIAL_FIFO_BUF_SIZE > PAGE_SHIFT)
fifo_buf_order = LOG2_INITIAL_FIFO_BUF_SIZE - PAGE_SHIFT;
else
fifo_buf_order = 0;
rc = usb_register(&xillyusb_driver);
return rc;
}
static void __exit xillyusb_exit(void)
{
usb_deregister(&xillyusb_driver);
}
module_init(xillyusb_init);
module_exit(xillyusb_exit);