blob: 5407e59bb1854a07e42ce8b036c7740466660a1e [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2014-2017, The Linux Foundation. All rights reserved.
* Copyright (c) 2019, Linaro Ltd.
*/
#include <linux/clk-provider.h>
#include <linux/clk.h>
#include <linux/iopoll.h>
#include <linux/module.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/reset.h>
#include <linux/slab.h>
#include <dt-bindings/phy/phy.h>
#define PCIE20_PARF_PHY_STTS 0x3c
#define PCIE2_PHY_RESET_CTRL 0x44
#define PCIE20_PARF_PHY_REFCLK_CTRL2 0xa0
#define PCIE20_PARF_PHY_REFCLK_CTRL3 0xa4
#define PCIE20_PARF_PCS_SWING_CTRL1 0x88
#define PCIE20_PARF_PCS_SWING_CTRL2 0x8c
#define PCIE20_PARF_PCS_DEEMPH1 0x74
#define PCIE20_PARF_PCS_DEEMPH2 0x78
#define PCIE20_PARF_PCS_DEEMPH3 0x7c
#define PCIE20_PARF_CONFIGBITS 0x84
#define PCIE20_PARF_PHY_CTRL3 0x94
#define PCIE20_PARF_PCS_CTRL 0x80
#define TX_AMP_VAL 120
#define PHY_RX0_EQ_GEN1_VAL 0
#define PHY_RX0_EQ_GEN2_VAL 4
#define TX_DEEMPH_GEN1_VAL 24
#define TX_DEEMPH_GEN2_3_5DB_VAL 26
#define TX_DEEMPH_GEN2_6DB_VAL 36
#define PHY_TX0_TERM_OFFST_VAL 0
struct qcom_phy {
struct device *dev;
void __iomem *base;
struct regulator_bulk_data vregs[2];
struct reset_control *phy_reset;
struct reset_control *pipe_reset;
struct clk *pipe_clk;
};
static int qcom_pcie2_phy_init(struct phy *phy)
{
struct qcom_phy *qphy = phy_get_drvdata(phy);
int ret;
ret = reset_control_deassert(qphy->phy_reset);
if (ret) {
dev_err(qphy->dev, "cannot deassert pipe reset\n");
return ret;
}
ret = regulator_bulk_enable(ARRAY_SIZE(qphy->vregs), qphy->vregs);
if (ret)
reset_control_assert(qphy->phy_reset);
return ret;
}
static int qcom_pcie2_phy_power_on(struct phy *phy)
{
struct qcom_phy *qphy = phy_get_drvdata(phy);
int ret;
u32 val;
/* Program REF_CLK source */
val = readl(qphy->base + PCIE20_PARF_PHY_REFCLK_CTRL2);
val &= ~BIT(1);
writel(val, qphy->base + PCIE20_PARF_PHY_REFCLK_CTRL2);
usleep_range(1000, 2000);
/* Don't use PAD for refclock */
val = readl(qphy->base + PCIE20_PARF_PHY_REFCLK_CTRL2);
val &= ~BIT(0);
writel(val, qphy->base + PCIE20_PARF_PHY_REFCLK_CTRL2);
/* Program SSP ENABLE */
val = readl(qphy->base + PCIE20_PARF_PHY_REFCLK_CTRL3);
val |= BIT(0);
writel(val, qphy->base + PCIE20_PARF_PHY_REFCLK_CTRL3);
usleep_range(1000, 2000);
/* Assert Phy SW Reset */
val = readl(qphy->base + PCIE2_PHY_RESET_CTRL);
val |= BIT(0);
writel(val, qphy->base + PCIE2_PHY_RESET_CTRL);
/* Program Tx Amplitude */
val = readl(qphy->base + PCIE20_PARF_PCS_SWING_CTRL1);
val &= ~0x7f;
val |= TX_AMP_VAL;
writel(val, qphy->base + PCIE20_PARF_PCS_SWING_CTRL1);
val = readl(qphy->base + PCIE20_PARF_PCS_SWING_CTRL2);
val &= ~0x7f;
val |= TX_AMP_VAL;
writel(val, qphy->base + PCIE20_PARF_PCS_SWING_CTRL2);
/* Program De-Emphasis */
val = readl(qphy->base + PCIE20_PARF_PCS_DEEMPH1);
val &= ~0x3f;
val |= TX_DEEMPH_GEN2_6DB_VAL;
writel(val, qphy->base + PCIE20_PARF_PCS_DEEMPH1);
val = readl(qphy->base + PCIE20_PARF_PCS_DEEMPH2);
val &= ~0x3f;
val |= TX_DEEMPH_GEN2_3_5DB_VAL;
writel(val, qphy->base + PCIE20_PARF_PCS_DEEMPH2);
val = readl(qphy->base + PCIE20_PARF_PCS_DEEMPH3);
val &= ~0x3f;
val |= TX_DEEMPH_GEN1_VAL;
writel(val, qphy->base + PCIE20_PARF_PCS_DEEMPH3);
/* Program Rx_Eq */
val = readl(qphy->base + PCIE20_PARF_CONFIGBITS);
val &= ~0x7;
val |= PHY_RX0_EQ_GEN2_VAL;
writel(val, qphy->base + PCIE20_PARF_CONFIGBITS);
/* Program Tx0_term_offset */
val = readl(qphy->base + PCIE20_PARF_PHY_CTRL3);
val &= ~0x1f;
val |= PHY_TX0_TERM_OFFST_VAL;
writel(val, qphy->base + PCIE20_PARF_PHY_CTRL3);
/* disable Tx2Rx Loopback */
val = readl(qphy->base + PCIE20_PARF_PCS_CTRL);
val &= ~BIT(1);
writel(val, qphy->base + PCIE20_PARF_PCS_CTRL);
/* De-assert Phy SW Reset */
val = readl(qphy->base + PCIE2_PHY_RESET_CTRL);
val &= ~BIT(0);
writel(val, qphy->base + PCIE2_PHY_RESET_CTRL);
usleep_range(1000, 2000);
ret = reset_control_deassert(qphy->pipe_reset);
if (ret) {
dev_err(qphy->dev, "cannot deassert pipe reset\n");
goto out;
}
clk_set_rate(qphy->pipe_clk, 250000000);
ret = clk_prepare_enable(qphy->pipe_clk);
if (ret) {
dev_err(qphy->dev, "failed to enable pipe clock\n");
goto out;
}
ret = readl_poll_timeout(qphy->base + PCIE20_PARF_PHY_STTS, val,
!(val & BIT(0)), 1000, 10);
if (ret)
dev_err(qphy->dev, "phy initialization failed\n");
out:
return ret;
}
static int qcom_pcie2_phy_power_off(struct phy *phy)
{
struct qcom_phy *qphy = phy_get_drvdata(phy);
u32 val;
val = readl(qphy->base + PCIE2_PHY_RESET_CTRL);
val |= BIT(0);
writel(val, qphy->base + PCIE2_PHY_RESET_CTRL);
clk_disable_unprepare(qphy->pipe_clk);
reset_control_assert(qphy->pipe_reset);
return 0;
}
static int qcom_pcie2_phy_exit(struct phy *phy)
{
struct qcom_phy *qphy = phy_get_drvdata(phy);
regulator_bulk_disable(ARRAY_SIZE(qphy->vregs), qphy->vregs);
reset_control_assert(qphy->phy_reset);
return 0;
}
static const struct phy_ops qcom_pcie2_ops = {
.init = qcom_pcie2_phy_init,
.power_on = qcom_pcie2_phy_power_on,
.power_off = qcom_pcie2_phy_power_off,
.exit = qcom_pcie2_phy_exit,
.owner = THIS_MODULE,
};
/*
* Register a fixed rate pipe clock.
*
* The <s>_pipe_clksrc generated by PHY goes to the GCC that gate
* controls it. The <s>_pipe_clk coming out of the GCC is requested
* by the PHY driver for its operations.
* We register the <s>_pipe_clksrc here. The gcc driver takes care
* of assigning this <s>_pipe_clksrc as parent to <s>_pipe_clk.
* Below picture shows this relationship.
*
* +---------------+
* | PHY block |<<---------------------------------------+
* | | |
* | +-------+ | +-----+ |
* I/P---^-->| PLL |---^--->pipe_clksrc--->| GCC |--->pipe_clk---+
* clk | +-------+ | +-----+
* +---------------+
*/
static int phy_pipe_clksrc_register(struct qcom_phy *qphy)
{
struct device_node *np = qphy->dev->of_node;
struct clk_fixed_rate *fixed;
struct clk_init_data init = { };
int ret;
ret = of_property_read_string(np, "clock-output-names", &init.name);
if (ret) {
dev_err(qphy->dev, "%s: No clock-output-names\n", np->name);
return ret;
}
fixed = devm_kzalloc(qphy->dev, sizeof(*fixed), GFP_KERNEL);
if (!fixed)
return -ENOMEM;
init.ops = &clk_fixed_rate_ops;
/* controllers using QMP phys use 250MHz pipe clock interface */
fixed->fixed_rate = 250000000;
fixed->hw.init = &init;
return devm_clk_hw_register(qphy->dev, &fixed->hw);
}
static int qcom_pcie2_phy_probe(struct platform_device *pdev)
{
struct phy_provider *phy_provider;
struct qcom_phy *qphy;
struct device *dev = &pdev->dev;
struct phy *phy;
int ret;
qphy = devm_kzalloc(dev, sizeof(*qphy), GFP_KERNEL);
if (!qphy)
return -ENOMEM;
qphy->dev = dev;
qphy->base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(qphy->base))
return PTR_ERR(qphy->base);
ret = phy_pipe_clksrc_register(qphy);
if (ret) {
dev_err(dev, "failed to register pipe_clk\n");
return ret;
}
qphy->vregs[0].supply = "vdda-vp";
qphy->vregs[1].supply = "vdda-vph";
ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(qphy->vregs), qphy->vregs);
if (ret < 0)
return ret;
qphy->pipe_clk = devm_clk_get(dev, NULL);
if (IS_ERR(qphy->pipe_clk)) {
dev_err(dev, "failed to acquire pipe clock\n");
return PTR_ERR(qphy->pipe_clk);
}
qphy->phy_reset = devm_reset_control_get_exclusive(dev, "phy");
if (IS_ERR(qphy->phy_reset)) {
dev_err(dev, "failed to acquire phy reset\n");
return PTR_ERR(qphy->phy_reset);
}
qphy->pipe_reset = devm_reset_control_get_exclusive(dev, "pipe");
if (IS_ERR(qphy->pipe_reset)) {
dev_err(dev, "failed to acquire pipe reset\n");
return PTR_ERR(qphy->pipe_reset);
}
phy = devm_phy_create(dev, dev->of_node, &qcom_pcie2_ops);
if (IS_ERR(phy)) {
dev_err(dev, "failed to create phy\n");
return PTR_ERR(phy);
}
phy_set_drvdata(phy, qphy);
phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
if (IS_ERR(phy_provider))
dev_err(dev, "failed to register phy provider\n");
return PTR_ERR_OR_ZERO(phy_provider);
}
static const struct of_device_id qcom_pcie2_phy_match_table[] = {
{ .compatible = "qcom,pcie2-phy" },
{}
};
MODULE_DEVICE_TABLE(of, qcom_pcie2_phy_match_table);
static struct platform_driver qcom_pcie2_phy_driver = {
.probe = qcom_pcie2_phy_probe,
.driver = {
.name = "phy-qcom-pcie2",
.of_match_table = qcom_pcie2_phy_match_table,
},
};
module_platform_driver(qcom_pcie2_phy_driver);
MODULE_DESCRIPTION("Qualcomm PCIe PHY driver");
MODULE_LICENSE("GPL v2");