| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Copyright (C) 2001 Mike Corrigan & Dave Engebretsen, IBM Corporation |
| * |
| * Rewrite, cleanup: |
| * |
| * Copyright (C) 2004 Olof Johansson <olof@lixom.net>, IBM Corporation |
| * Copyright (C) 2006 Olof Johansson <olof@lixom.net> |
| * |
| * Dynamic DMA mapping support, pSeries-specific parts, both SMP and LPAR. |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/types.h> |
| #include <linux/slab.h> |
| #include <linux/mm.h> |
| #include <linux/memblock.h> |
| #include <linux/spinlock.h> |
| #include <linux/string.h> |
| #include <linux/pci.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/crash_dump.h> |
| #include <linux/memory.h> |
| #include <linux/vmalloc.h> |
| #include <linux/of.h> |
| #include <linux/of_address.h> |
| #include <linux/iommu.h> |
| #include <linux/rculist.h> |
| #include <asm/io.h> |
| #include <asm/prom.h> |
| #include <asm/rtas.h> |
| #include <asm/iommu.h> |
| #include <asm/pci-bridge.h> |
| #include <asm/machdep.h> |
| #include <asm/firmware.h> |
| #include <asm/tce.h> |
| #include <asm/ppc-pci.h> |
| #include <asm/udbg.h> |
| #include <asm/mmzone.h> |
| #include <asm/plpar_wrappers.h> |
| |
| #include "pseries.h" |
| |
| enum { |
| DDW_QUERY_PE_DMA_WIN = 0, |
| DDW_CREATE_PE_DMA_WIN = 1, |
| DDW_REMOVE_PE_DMA_WIN = 2, |
| |
| DDW_APPLICABLE_SIZE |
| }; |
| |
| enum { |
| DDW_EXT_SIZE = 0, |
| DDW_EXT_RESET_DMA_WIN = 1, |
| DDW_EXT_QUERY_OUT_SIZE = 2 |
| }; |
| |
| static struct iommu_table *iommu_pseries_alloc_table(int node) |
| { |
| struct iommu_table *tbl; |
| |
| tbl = kzalloc_node(sizeof(struct iommu_table), GFP_KERNEL, node); |
| if (!tbl) |
| return NULL; |
| |
| INIT_LIST_HEAD_RCU(&tbl->it_group_list); |
| kref_init(&tbl->it_kref); |
| return tbl; |
| } |
| |
| #ifdef CONFIG_IOMMU_API |
| static struct iommu_table_group_ops spapr_tce_table_group_ops; |
| #endif |
| |
| static struct iommu_table_group *iommu_pseries_alloc_group(int node) |
| { |
| struct iommu_table_group *table_group; |
| |
| table_group = kzalloc_node(sizeof(*table_group), GFP_KERNEL, node); |
| if (!table_group) |
| return NULL; |
| |
| #ifdef CONFIG_IOMMU_API |
| table_group->ops = &spapr_tce_table_group_ops; |
| table_group->pgsizes = SZ_4K; |
| #endif |
| |
| table_group->tables[0] = iommu_pseries_alloc_table(node); |
| if (table_group->tables[0]) |
| return table_group; |
| |
| kfree(table_group); |
| return NULL; |
| } |
| |
| static void iommu_pseries_free_group(struct iommu_table_group *table_group, |
| const char *node_name) |
| { |
| if (!table_group) |
| return; |
| |
| #ifdef CONFIG_IOMMU_API |
| if (table_group->group) { |
| iommu_group_put(table_group->group); |
| BUG_ON(table_group->group); |
| } |
| #endif |
| |
| /* Default DMA window table is at index 0, while DDW at 1. SR-IOV |
| * adapters only have table on index 0(if not direct mapped). |
| */ |
| if (table_group->tables[0]) |
| iommu_tce_table_put(table_group->tables[0]); |
| |
| if (table_group->tables[1]) |
| iommu_tce_table_put(table_group->tables[1]); |
| |
| kfree(table_group); |
| } |
| |
| static int tce_build_pSeries(struct iommu_table *tbl, long index, |
| long npages, unsigned long uaddr, |
| enum dma_data_direction direction, |
| unsigned long attrs) |
| { |
| u64 proto_tce; |
| __be64 *tcep; |
| u64 rpn; |
| const unsigned long tceshift = tbl->it_page_shift; |
| const unsigned long pagesize = IOMMU_PAGE_SIZE(tbl); |
| |
| proto_tce = TCE_PCI_READ; // Read allowed |
| |
| if (direction != DMA_TO_DEVICE) |
| proto_tce |= TCE_PCI_WRITE; |
| |
| tcep = ((__be64 *)tbl->it_base) + index; |
| |
| while (npages--) { |
| /* can't move this out since we might cross MEMBLOCK boundary */ |
| rpn = __pa(uaddr) >> tceshift; |
| *tcep = cpu_to_be64(proto_tce | rpn << tceshift); |
| |
| uaddr += pagesize; |
| tcep++; |
| } |
| return 0; |
| } |
| |
| |
| static void tce_clear_pSeries(struct iommu_table *tbl, long index, long npages) |
| { |
| __be64 *tcep; |
| |
| tcep = ((__be64 *)tbl->it_base) + index; |
| |
| while (npages--) |
| *(tcep++) = 0; |
| } |
| |
| static unsigned long tce_get_pseries(struct iommu_table *tbl, long index) |
| { |
| __be64 *tcep; |
| |
| tcep = ((__be64 *)tbl->it_base) + index; |
| |
| return be64_to_cpu(*tcep); |
| } |
| |
| #ifdef CONFIG_IOMMU_API |
| static long pseries_tce_iommu_userspace_view_alloc(struct iommu_table *tbl) |
| { |
| unsigned long cb = ALIGN(sizeof(tbl->it_userspace[0]) * tbl->it_size, PAGE_SIZE); |
| unsigned long *uas; |
| |
| if (tbl->it_indirect_levels) /* Impossible */ |
| return -EPERM; |
| |
| WARN_ON(tbl->it_userspace); |
| |
| uas = vzalloc(cb); |
| if (!uas) |
| return -ENOMEM; |
| |
| tbl->it_userspace = (__be64 *) uas; |
| |
| return 0; |
| } |
| #endif |
| |
| static void tce_iommu_userspace_view_free(struct iommu_table *tbl) |
| { |
| vfree(tbl->it_userspace); |
| tbl->it_userspace = NULL; |
| } |
| |
| static void tce_free_pSeries(struct iommu_table *tbl) |
| { |
| if (!tbl->it_userspace) |
| tce_iommu_userspace_view_free(tbl); |
| } |
| |
| static void tce_free_pSeriesLP(unsigned long liobn, long, long, long); |
| static void tce_freemulti_pSeriesLP(struct iommu_table*, long, long); |
| |
| static int tce_build_pSeriesLP(unsigned long liobn, long tcenum, long tceshift, |
| long npages, unsigned long uaddr, |
| enum dma_data_direction direction, |
| unsigned long attrs) |
| { |
| u64 rc = 0; |
| u64 proto_tce, tce; |
| u64 rpn; |
| int ret = 0; |
| long tcenum_start = tcenum, npages_start = npages; |
| |
| rpn = __pa(uaddr) >> tceshift; |
| proto_tce = TCE_PCI_READ; |
| if (direction != DMA_TO_DEVICE) |
| proto_tce |= TCE_PCI_WRITE; |
| |
| while (npages--) { |
| tce = proto_tce | rpn << tceshift; |
| rc = plpar_tce_put((u64)liobn, (u64)tcenum << tceshift, tce); |
| |
| if (unlikely(rc == H_NOT_ENOUGH_RESOURCES)) { |
| ret = (int)rc; |
| tce_free_pSeriesLP(liobn, tcenum_start, tceshift, |
| (npages_start - (npages + 1))); |
| break; |
| } |
| |
| if (rc && printk_ratelimit()) { |
| printk("tce_build_pSeriesLP: plpar_tce_put failed. rc=%lld\n", rc); |
| printk("\tindex = 0x%llx\n", (u64)liobn); |
| printk("\ttcenum = 0x%llx\n", (u64)tcenum); |
| printk("\ttce val = 0x%llx\n", tce ); |
| dump_stack(); |
| } |
| |
| tcenum++; |
| rpn++; |
| } |
| return ret; |
| } |
| |
| static DEFINE_PER_CPU(__be64 *, tce_page); |
| |
| static int tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum, |
| long npages, unsigned long uaddr, |
| enum dma_data_direction direction, |
| unsigned long attrs) |
| { |
| u64 rc = 0; |
| u64 proto_tce; |
| __be64 *tcep; |
| u64 rpn; |
| long l, limit; |
| long tcenum_start = tcenum, npages_start = npages; |
| int ret = 0; |
| unsigned long flags; |
| const unsigned long tceshift = tbl->it_page_shift; |
| |
| if ((npages == 1) || !firmware_has_feature(FW_FEATURE_PUT_TCE_IND)) { |
| return tce_build_pSeriesLP(tbl->it_index, tcenum, |
| tceshift, npages, uaddr, |
| direction, attrs); |
| } |
| |
| local_irq_save(flags); /* to protect tcep and the page behind it */ |
| |
| tcep = __this_cpu_read(tce_page); |
| |
| /* This is safe to do since interrupts are off when we're called |
| * from iommu_alloc{,_sg}() |
| */ |
| if (!tcep) { |
| tcep = (__be64 *)__get_free_page(GFP_ATOMIC); |
| /* If allocation fails, fall back to the loop implementation */ |
| if (!tcep) { |
| local_irq_restore(flags); |
| return tce_build_pSeriesLP(tbl->it_index, tcenum, |
| tceshift, |
| npages, uaddr, direction, attrs); |
| } |
| __this_cpu_write(tce_page, tcep); |
| } |
| |
| rpn = __pa(uaddr) >> tceshift; |
| proto_tce = TCE_PCI_READ; |
| if (direction != DMA_TO_DEVICE) |
| proto_tce |= TCE_PCI_WRITE; |
| |
| /* We can map max one pageful of TCEs at a time */ |
| do { |
| /* |
| * Set up the page with TCE data, looping through and setting |
| * the values. |
| */ |
| limit = min_t(long, npages, 4096 / TCE_ENTRY_SIZE); |
| |
| for (l = 0; l < limit; l++) { |
| tcep[l] = cpu_to_be64(proto_tce | rpn << tceshift); |
| rpn++; |
| } |
| |
| rc = plpar_tce_put_indirect((u64)tbl->it_index, |
| (u64)tcenum << tceshift, |
| (u64)__pa(tcep), |
| limit); |
| |
| npages -= limit; |
| tcenum += limit; |
| } while (npages > 0 && !rc); |
| |
| local_irq_restore(flags); |
| |
| if (unlikely(rc == H_NOT_ENOUGH_RESOURCES)) { |
| ret = (int)rc; |
| tce_freemulti_pSeriesLP(tbl, tcenum_start, |
| (npages_start - (npages + limit))); |
| return ret; |
| } |
| |
| if (rc && printk_ratelimit()) { |
| printk("tce_buildmulti_pSeriesLP: plpar_tce_put failed. rc=%lld\n", rc); |
| printk("\tindex = 0x%llx\n", (u64)tbl->it_index); |
| printk("\tnpages = 0x%llx\n", (u64)npages); |
| printk("\ttce[0] val = 0x%llx\n", tcep[0]); |
| dump_stack(); |
| } |
| return ret; |
| } |
| |
| static void tce_free_pSeriesLP(unsigned long liobn, long tcenum, long tceshift, |
| long npages) |
| { |
| u64 rc; |
| |
| while (npages--) { |
| rc = plpar_tce_put((u64)liobn, (u64)tcenum << tceshift, 0); |
| |
| if (rc && printk_ratelimit()) { |
| printk("tce_free_pSeriesLP: plpar_tce_put failed. rc=%lld\n", rc); |
| printk("\tindex = 0x%llx\n", (u64)liobn); |
| printk("\ttcenum = 0x%llx\n", (u64)tcenum); |
| dump_stack(); |
| } |
| |
| tcenum++; |
| } |
| } |
| |
| |
| static void tce_freemulti_pSeriesLP(struct iommu_table *tbl, long tcenum, long npages) |
| { |
| u64 rc; |
| long rpages = npages; |
| unsigned long limit; |
| |
| if (!firmware_has_feature(FW_FEATURE_STUFF_TCE)) |
| return tce_free_pSeriesLP(tbl->it_index, tcenum, |
| tbl->it_page_shift, npages); |
| |
| do { |
| limit = min_t(unsigned long, rpages, 512); |
| |
| rc = plpar_tce_stuff((u64)tbl->it_index, |
| (u64)tcenum << tbl->it_page_shift, 0, limit); |
| |
| rpages -= limit; |
| tcenum += limit; |
| } while (rpages > 0 && !rc); |
| |
| if (rc && printk_ratelimit()) { |
| printk("tce_freemulti_pSeriesLP: plpar_tce_stuff failed\n"); |
| printk("\trc = %lld\n", rc); |
| printk("\tindex = 0x%llx\n", (u64)tbl->it_index); |
| printk("\tnpages = 0x%llx\n", (u64)npages); |
| dump_stack(); |
| } |
| } |
| |
| static unsigned long tce_get_pSeriesLP(struct iommu_table *tbl, long tcenum) |
| { |
| u64 rc; |
| unsigned long tce_ret; |
| |
| rc = plpar_tce_get((u64)tbl->it_index, |
| (u64)tcenum << tbl->it_page_shift, &tce_ret); |
| |
| if (rc && printk_ratelimit()) { |
| printk("tce_get_pSeriesLP: plpar_tce_get failed. rc=%lld\n", rc); |
| printk("\tindex = 0x%llx\n", (u64)tbl->it_index); |
| printk("\ttcenum = 0x%llx\n", (u64)tcenum); |
| dump_stack(); |
| } |
| |
| return tce_ret; |
| } |
| |
| /* this is compatible with cells for the device tree property */ |
| struct dynamic_dma_window_prop { |
| __be32 liobn; /* tce table number */ |
| __be64 dma_base; /* address hi,lo */ |
| __be32 tce_shift; /* ilog2(tce_page_size) */ |
| __be32 window_shift; /* ilog2(tce_window_size) */ |
| }; |
| |
| struct dma_win { |
| struct device_node *device; |
| const struct dynamic_dma_window_prop *prop; |
| bool direct; |
| struct list_head list; |
| }; |
| |
| /* Dynamic DMA Window support */ |
| struct ddw_query_response { |
| u32 windows_available; |
| u64 largest_available_block; |
| u32 page_size; |
| u32 migration_capable; |
| }; |
| |
| struct ddw_create_response { |
| u32 liobn; |
| u32 addr_hi; |
| u32 addr_lo; |
| }; |
| |
| static LIST_HEAD(dma_win_list); |
| /* prevents races between memory on/offline and window creation */ |
| static DEFINE_SPINLOCK(dma_win_list_lock); |
| /* protects initializing window twice for same device */ |
| static DEFINE_MUTEX(dma_win_init_mutex); |
| |
| static int tce_clearrange_multi_pSeriesLP(unsigned long start_pfn, |
| unsigned long num_pfn, const void *arg) |
| { |
| const struct dynamic_dma_window_prop *maprange = arg; |
| int rc; |
| u64 tce_size, num_tce, dma_offset, next; |
| u32 tce_shift; |
| long limit; |
| |
| tce_shift = be32_to_cpu(maprange->tce_shift); |
| tce_size = 1ULL << tce_shift; |
| next = start_pfn << PAGE_SHIFT; |
| num_tce = num_pfn << PAGE_SHIFT; |
| |
| /* round back to the beginning of the tce page size */ |
| num_tce += next & (tce_size - 1); |
| next &= ~(tce_size - 1); |
| |
| /* covert to number of tces */ |
| num_tce |= tce_size - 1; |
| num_tce >>= tce_shift; |
| |
| do { |
| /* |
| * Set up the page with TCE data, looping through and setting |
| * the values. |
| */ |
| limit = min_t(long, num_tce, 512); |
| dma_offset = next + be64_to_cpu(maprange->dma_base); |
| |
| rc = plpar_tce_stuff((u64)be32_to_cpu(maprange->liobn), |
| dma_offset, |
| 0, limit); |
| next += limit * tce_size; |
| num_tce -= limit; |
| } while (num_tce > 0 && !rc); |
| |
| return rc; |
| } |
| |
| static int tce_setrange_multi_pSeriesLP(unsigned long start_pfn, |
| unsigned long num_pfn, const void *arg) |
| { |
| const struct dynamic_dma_window_prop *maprange = arg; |
| u64 tce_size, num_tce, dma_offset, next, proto_tce, liobn; |
| __be64 *tcep; |
| u32 tce_shift; |
| u64 rc = 0; |
| long l, limit; |
| |
| if (!firmware_has_feature(FW_FEATURE_PUT_TCE_IND)) { |
| unsigned long tceshift = be32_to_cpu(maprange->tce_shift); |
| unsigned long dmastart = (start_pfn << PAGE_SHIFT) + |
| be64_to_cpu(maprange->dma_base); |
| unsigned long tcenum = dmastart >> tceshift; |
| unsigned long npages = num_pfn << PAGE_SHIFT >> tceshift; |
| void *uaddr = __va(start_pfn << PAGE_SHIFT); |
| |
| return tce_build_pSeriesLP(be32_to_cpu(maprange->liobn), |
| tcenum, tceshift, npages, (unsigned long) uaddr, |
| DMA_BIDIRECTIONAL, 0); |
| } |
| |
| local_irq_disable(); /* to protect tcep and the page behind it */ |
| tcep = __this_cpu_read(tce_page); |
| |
| if (!tcep) { |
| tcep = (__be64 *)__get_free_page(GFP_ATOMIC); |
| if (!tcep) { |
| local_irq_enable(); |
| return -ENOMEM; |
| } |
| __this_cpu_write(tce_page, tcep); |
| } |
| |
| proto_tce = TCE_PCI_READ | TCE_PCI_WRITE; |
| |
| liobn = (u64)be32_to_cpu(maprange->liobn); |
| tce_shift = be32_to_cpu(maprange->tce_shift); |
| tce_size = 1ULL << tce_shift; |
| next = start_pfn << PAGE_SHIFT; |
| num_tce = num_pfn << PAGE_SHIFT; |
| |
| /* round back to the beginning of the tce page size */ |
| num_tce += next & (tce_size - 1); |
| next &= ~(tce_size - 1); |
| |
| /* covert to number of tces */ |
| num_tce |= tce_size - 1; |
| num_tce >>= tce_shift; |
| |
| /* We can map max one pageful of TCEs at a time */ |
| do { |
| /* |
| * Set up the page with TCE data, looping through and setting |
| * the values. |
| */ |
| limit = min_t(long, num_tce, 4096 / TCE_ENTRY_SIZE); |
| dma_offset = next + be64_to_cpu(maprange->dma_base); |
| |
| for (l = 0; l < limit; l++) { |
| tcep[l] = cpu_to_be64(proto_tce | next); |
| next += tce_size; |
| } |
| |
| rc = plpar_tce_put_indirect(liobn, |
| dma_offset, |
| (u64)__pa(tcep), |
| limit); |
| |
| num_tce -= limit; |
| } while (num_tce > 0 && !rc); |
| |
| /* error cleanup: caller will clear whole range */ |
| |
| local_irq_enable(); |
| return rc; |
| } |
| |
| static int tce_setrange_multi_pSeriesLP_walk(unsigned long start_pfn, |
| unsigned long num_pfn, void *arg) |
| { |
| return tce_setrange_multi_pSeriesLP(start_pfn, num_pfn, arg); |
| } |
| |
| static void iommu_table_setparms_common(struct iommu_table *tbl, unsigned long busno, |
| unsigned long liobn, unsigned long win_addr, |
| unsigned long window_size, unsigned long page_shift, |
| void *base, struct iommu_table_ops *table_ops) |
| { |
| tbl->it_busno = busno; |
| tbl->it_index = liobn; |
| tbl->it_offset = win_addr >> page_shift; |
| tbl->it_size = window_size >> page_shift; |
| tbl->it_page_shift = page_shift; |
| tbl->it_base = (unsigned long)base; |
| tbl->it_blocksize = 16; |
| tbl->it_type = TCE_PCI; |
| tbl->it_ops = table_ops; |
| } |
| |
| struct iommu_table_ops iommu_table_pseries_ops; |
| |
| static void iommu_table_setparms(struct pci_controller *phb, |
| struct device_node *dn, |
| struct iommu_table *tbl) |
| { |
| struct device_node *node; |
| const unsigned long *basep; |
| const u32 *sizep; |
| |
| /* Test if we are going over 2GB of DMA space */ |
| if (phb->dma_window_base_cur + phb->dma_window_size > SZ_2G) { |
| udbg_printf("PCI_DMA: Unexpected number of IOAs under this PHB.\n"); |
| panic("PCI_DMA: Unexpected number of IOAs under this PHB.\n"); |
| } |
| |
| node = phb->dn; |
| basep = of_get_property(node, "linux,tce-base", NULL); |
| sizep = of_get_property(node, "linux,tce-size", NULL); |
| if (basep == NULL || sizep == NULL) { |
| printk(KERN_ERR "PCI_DMA: iommu_table_setparms: %pOF has " |
| "missing tce entries !\n", dn); |
| return; |
| } |
| |
| iommu_table_setparms_common(tbl, phb->bus->number, 0, phb->dma_window_base_cur, |
| phb->dma_window_size, IOMMU_PAGE_SHIFT_4K, |
| __va(*basep), &iommu_table_pseries_ops); |
| |
| if (!is_kdump_kernel()) |
| memset((void *)tbl->it_base, 0, *sizep); |
| |
| phb->dma_window_base_cur += phb->dma_window_size; |
| } |
| |
| struct iommu_table_ops iommu_table_lpar_multi_ops; |
| |
| struct iommu_table_ops iommu_table_pseries_ops = { |
| .set = tce_build_pSeries, |
| .clear = tce_clear_pSeries, |
| .get = tce_get_pseries |
| }; |
| |
| static void pci_dma_bus_setup_pSeries(struct pci_bus *bus) |
| { |
| struct device_node *dn; |
| struct iommu_table *tbl; |
| struct device_node *isa_dn, *isa_dn_orig; |
| struct device_node *tmp; |
| struct pci_dn *pci; |
| int children; |
| |
| dn = pci_bus_to_OF_node(bus); |
| |
| pr_debug("pci_dma_bus_setup_pSeries: setting up bus %pOF\n", dn); |
| |
| if (bus->self) { |
| /* This is not a root bus, any setup will be done for the |
| * device-side of the bridge in iommu_dev_setup_pSeries(). |
| */ |
| return; |
| } |
| pci = PCI_DN(dn); |
| |
| /* Check if the ISA bus on the system is under |
| * this PHB. |
| */ |
| isa_dn = isa_dn_orig = of_find_node_by_type(NULL, "isa"); |
| |
| while (isa_dn && isa_dn != dn) |
| isa_dn = isa_dn->parent; |
| |
| of_node_put(isa_dn_orig); |
| |
| /* Count number of direct PCI children of the PHB. */ |
| for (children = 0, tmp = dn->child; tmp; tmp = tmp->sibling) |
| children++; |
| |
| pr_debug("Children: %d\n", children); |
| |
| /* Calculate amount of DMA window per slot. Each window must be |
| * a power of two (due to pci_alloc_consistent requirements). |
| * |
| * Keep 256MB aside for PHBs with ISA. |
| */ |
| |
| if (!isa_dn) { |
| /* No ISA/IDE - just set window size and return */ |
| pci->phb->dma_window_size = 0x80000000ul; /* To be divided */ |
| |
| while (pci->phb->dma_window_size * children > 0x80000000ul) |
| pci->phb->dma_window_size >>= 1; |
| pr_debug("No ISA/IDE, window size is 0x%llx\n", |
| pci->phb->dma_window_size); |
| pci->phb->dma_window_base_cur = 0; |
| |
| return; |
| } |
| |
| /* If we have ISA, then we probably have an IDE |
| * controller too. Allocate a 128MB table but |
| * skip the first 128MB to avoid stepping on ISA |
| * space. |
| */ |
| pci->phb->dma_window_size = 0x8000000ul; |
| pci->phb->dma_window_base_cur = 0x8000000ul; |
| |
| pci->table_group = iommu_pseries_alloc_group(pci->phb->node); |
| tbl = pci->table_group->tables[0]; |
| |
| iommu_table_setparms(pci->phb, dn, tbl); |
| |
| if (!iommu_init_table(tbl, pci->phb->node, 0, 0)) |
| panic("Failed to initialize iommu table"); |
| |
| /* Divide the rest (1.75GB) among the children */ |
| pci->phb->dma_window_size = 0x80000000ul; |
| while (pci->phb->dma_window_size * children > 0x70000000ul) |
| pci->phb->dma_window_size >>= 1; |
| |
| pr_debug("ISA/IDE, window size is 0x%llx\n", pci->phb->dma_window_size); |
| } |
| |
| #ifdef CONFIG_IOMMU_API |
| static int tce_exchange_pseries(struct iommu_table *tbl, long index, unsigned |
| long *tce, enum dma_data_direction *direction) |
| { |
| long rc; |
| unsigned long ioba = (unsigned long) index << tbl->it_page_shift; |
| unsigned long flags, oldtce = 0; |
| u64 proto_tce = iommu_direction_to_tce_perm(*direction); |
| unsigned long newtce = *tce | proto_tce; |
| |
| spin_lock_irqsave(&tbl->large_pool.lock, flags); |
| |
| rc = plpar_tce_get((u64)tbl->it_index, ioba, &oldtce); |
| if (!rc) |
| rc = plpar_tce_put((u64)tbl->it_index, ioba, newtce); |
| |
| if (!rc) { |
| *direction = iommu_tce_direction(oldtce); |
| *tce = oldtce & ~(TCE_PCI_READ | TCE_PCI_WRITE); |
| } |
| |
| spin_unlock_irqrestore(&tbl->large_pool.lock, flags); |
| |
| return rc; |
| } |
| |
| static __be64 *tce_useraddr_pSeriesLP(struct iommu_table *tbl, long index, |
| bool __always_unused alloc) |
| { |
| return tbl->it_userspace ? &tbl->it_userspace[index - tbl->it_offset] : NULL; |
| } |
| #endif |
| |
| struct iommu_table_ops iommu_table_lpar_multi_ops = { |
| .set = tce_buildmulti_pSeriesLP, |
| #ifdef CONFIG_IOMMU_API |
| .xchg_no_kill = tce_exchange_pseries, |
| .useraddrptr = tce_useraddr_pSeriesLP, |
| #endif |
| .clear = tce_freemulti_pSeriesLP, |
| .get = tce_get_pSeriesLP, |
| .free = tce_free_pSeries |
| }; |
| |
| #ifdef CONFIG_IOMMU_API |
| /* |
| * When the DMA window properties might have been removed, |
| * the parent node has the table_group setup on it. |
| */ |
| static struct device_node *pci_dma_find_parent_node(struct pci_dev *dev, |
| struct iommu_table_group *table_group) |
| { |
| struct device_node *dn = pci_device_to_OF_node(dev); |
| struct pci_dn *rpdn; |
| |
| for (; dn && PCI_DN(dn); dn = dn->parent) { |
| rpdn = PCI_DN(dn); |
| |
| if (table_group == rpdn->table_group) |
| return dn; |
| } |
| |
| return NULL; |
| } |
| #endif |
| |
| /* |
| * Find nearest ibm,dma-window (default DMA window) or direct DMA window or |
| * dynamic 64bit DMA window, walking up the device tree. |
| */ |
| static struct device_node *pci_dma_find(struct device_node *dn, |
| struct dynamic_dma_window_prop *prop) |
| { |
| const __be32 *default_prop = NULL; |
| const __be32 *ddw_prop = NULL; |
| struct device_node *rdn = NULL; |
| bool default_win = false, ddw_win = false; |
| |
| for ( ; dn && PCI_DN(dn); dn = dn->parent) { |
| default_prop = of_get_property(dn, "ibm,dma-window", NULL); |
| if (default_prop) { |
| rdn = dn; |
| default_win = true; |
| } |
| ddw_prop = of_get_property(dn, DIRECT64_PROPNAME, NULL); |
| if (ddw_prop) { |
| rdn = dn; |
| ddw_win = true; |
| break; |
| } |
| ddw_prop = of_get_property(dn, DMA64_PROPNAME, NULL); |
| if (ddw_prop) { |
| rdn = dn; |
| ddw_win = true; |
| break; |
| } |
| |
| /* At least found default window, which is the case for normal boot */ |
| if (default_win) |
| break; |
| } |
| |
| /* For PCI devices there will always be a DMA window, either on the device |
| * or parent bus |
| */ |
| WARN_ON(!(default_win | ddw_win)); |
| |
| /* caller doesn't want to get DMA window property */ |
| if (!prop) |
| return rdn; |
| |
| /* parse DMA window property. During normal system boot, only default |
| * DMA window is passed in OF. But, for kdump, a dedicated adapter might |
| * have both default and DDW in FDT. In this scenario, DDW takes precedence |
| * over default window. |
| */ |
| if (ddw_win) { |
| struct dynamic_dma_window_prop *p; |
| |
| p = (struct dynamic_dma_window_prop *)ddw_prop; |
| prop->liobn = p->liobn; |
| prop->dma_base = p->dma_base; |
| prop->tce_shift = p->tce_shift; |
| prop->window_shift = p->window_shift; |
| } else if (default_win) { |
| unsigned long offset, size, liobn; |
| |
| of_parse_dma_window(rdn, default_prop, &liobn, &offset, &size); |
| |
| prop->liobn = cpu_to_be32((u32)liobn); |
| prop->dma_base = cpu_to_be64(offset); |
| prop->tce_shift = cpu_to_be32(IOMMU_PAGE_SHIFT_4K); |
| prop->window_shift = cpu_to_be32(order_base_2(size)); |
| } |
| |
| return rdn; |
| } |
| |
| static void pci_dma_bus_setup_pSeriesLP(struct pci_bus *bus) |
| { |
| struct iommu_table *tbl; |
| struct device_node *dn, *pdn; |
| struct pci_dn *ppci; |
| struct dynamic_dma_window_prop prop; |
| |
| dn = pci_bus_to_OF_node(bus); |
| |
| pr_debug("pci_dma_bus_setup_pSeriesLP: setting up bus %pOF\n", |
| dn); |
| |
| pdn = pci_dma_find(dn, &prop); |
| |
| /* In PPC architecture, there will always be DMA window on bus or one of the |
| * parent bus. During reboot, there will be ibm,dma-window property to |
| * define DMA window. For kdump, there will at least be default window or DDW |
| * or both. |
| * There is an exception to the above. In case the PE goes into frozen |
| * state, firmware may not provide ibm,dma-window property at the time |
| * of LPAR boot up. |
| */ |
| |
| if (!pdn) { |
| pr_debug(" no ibm,dma-window property !\n"); |
| return; |
| } |
| |
| ppci = PCI_DN(pdn); |
| |
| pr_debug(" parent is %pOF, iommu_table: 0x%p\n", |
| pdn, ppci->table_group); |
| |
| if (!ppci->table_group) { |
| ppci->table_group = iommu_pseries_alloc_group(ppci->phb->node); |
| tbl = ppci->table_group->tables[0]; |
| |
| iommu_table_setparms_common(tbl, ppci->phb->bus->number, |
| be32_to_cpu(prop.liobn), |
| be64_to_cpu(prop.dma_base), |
| 1ULL << be32_to_cpu(prop.window_shift), |
| be32_to_cpu(prop.tce_shift), NULL, |
| &iommu_table_lpar_multi_ops); |
| |
| if (!iommu_init_table(tbl, ppci->phb->node, 0, 0)) |
| panic("Failed to initialize iommu table"); |
| |
| iommu_register_group(ppci->table_group, |
| pci_domain_nr(bus), 0); |
| pr_debug(" created table: %p\n", ppci->table_group); |
| } |
| } |
| |
| |
| static void pci_dma_dev_setup_pSeries(struct pci_dev *dev) |
| { |
| struct device_node *dn; |
| struct iommu_table *tbl; |
| |
| pr_debug("pci_dma_dev_setup_pSeries: %s\n", pci_name(dev)); |
| |
| dn = dev->dev.of_node; |
| |
| /* If we're the direct child of a root bus, then we need to allocate |
| * an iommu table ourselves. The bus setup code should have setup |
| * the window sizes already. |
| */ |
| if (!dev->bus->self) { |
| struct pci_controller *phb = PCI_DN(dn)->phb; |
| |
| pr_debug(" --> first child, no bridge. Allocating iommu table.\n"); |
| PCI_DN(dn)->table_group = iommu_pseries_alloc_group(phb->node); |
| tbl = PCI_DN(dn)->table_group->tables[0]; |
| iommu_table_setparms(phb, dn, tbl); |
| |
| if (!iommu_init_table(tbl, phb->node, 0, 0)) |
| panic("Failed to initialize iommu table"); |
| |
| set_iommu_table_base(&dev->dev, tbl); |
| return; |
| } |
| |
| /* If this device is further down the bus tree, search upwards until |
| * an already allocated iommu table is found and use that. |
| */ |
| |
| while (dn && PCI_DN(dn) && PCI_DN(dn)->table_group == NULL) |
| dn = dn->parent; |
| |
| if (dn && PCI_DN(dn)) |
| set_iommu_table_base(&dev->dev, |
| PCI_DN(dn)->table_group->tables[0]); |
| else |
| printk(KERN_WARNING "iommu: Device %s has no iommu table\n", |
| pci_name(dev)); |
| } |
| |
| static int __read_mostly disable_ddw; |
| |
| static int __init disable_ddw_setup(char *str) |
| { |
| disable_ddw = 1; |
| printk(KERN_INFO "ppc iommu: disabling ddw.\n"); |
| |
| return 0; |
| } |
| |
| early_param("disable_ddw", disable_ddw_setup); |
| |
| static void clean_dma_window(struct device_node *np, struct dynamic_dma_window_prop *dwp) |
| { |
| int ret; |
| |
| ret = tce_clearrange_multi_pSeriesLP(0, |
| 1ULL << (be32_to_cpu(dwp->window_shift) - PAGE_SHIFT), dwp); |
| if (ret) |
| pr_warn("%pOF failed to clear tces in window.\n", |
| np); |
| else |
| pr_debug("%pOF successfully cleared tces in window.\n", |
| np); |
| } |
| |
| /* |
| * Call only if DMA window is clean. |
| */ |
| static void __remove_dma_window(struct device_node *np, u32 *ddw_avail, u64 liobn) |
| { |
| int ret; |
| |
| ret = rtas_call(ddw_avail[DDW_REMOVE_PE_DMA_WIN], 1, 1, NULL, liobn); |
| if (ret) |
| pr_warn("%pOF: failed to remove DMA window: rtas returned " |
| "%d to ibm,remove-pe-dma-window(%x) %llx\n", |
| np, ret, ddw_avail[DDW_REMOVE_PE_DMA_WIN], liobn); |
| else |
| pr_debug("%pOF: successfully removed DMA window: rtas returned " |
| "%d to ibm,remove-pe-dma-window(%x) %llx\n", |
| np, ret, ddw_avail[DDW_REMOVE_PE_DMA_WIN], liobn); |
| } |
| |
| static void remove_dma_window(struct device_node *np, u32 *ddw_avail, |
| struct property *win, bool cleanup) |
| { |
| struct dynamic_dma_window_prop *dwp; |
| u64 liobn; |
| |
| dwp = win->value; |
| liobn = (u64)be32_to_cpu(dwp->liobn); |
| |
| if (cleanup) |
| clean_dma_window(np, dwp); |
| __remove_dma_window(np, ddw_avail, liobn); |
| } |
| |
| static void copy_property(struct device_node *pdn, const char *from, const char *to) |
| { |
| struct property *src, *dst; |
| |
| src = of_find_property(pdn, from, NULL); |
| if (!src) |
| return; |
| |
| dst = kzalloc(sizeof(*dst), GFP_KERNEL); |
| if (!dst) |
| return; |
| |
| dst->name = kstrdup(to, GFP_KERNEL); |
| dst->value = kmemdup(src->value, src->length, GFP_KERNEL); |
| dst->length = src->length; |
| if (!dst->name || !dst->value) |
| return; |
| |
| if (of_add_property(pdn, dst)) { |
| pr_err("Unable to add DMA window property for %pOF", pdn); |
| goto free_prop; |
| } |
| |
| return; |
| |
| free_prop: |
| kfree(dst->name); |
| kfree(dst->value); |
| kfree(dst); |
| } |
| |
| static int remove_dma_window_named(struct device_node *np, bool remove_prop, const char *win_name, |
| bool cleanup) |
| { |
| struct property *win; |
| u32 ddw_avail[DDW_APPLICABLE_SIZE]; |
| int ret = 0; |
| |
| win = of_find_property(np, win_name, NULL); |
| if (!win) |
| return -EINVAL; |
| |
| ret = of_property_read_u32_array(np, "ibm,ddw-applicable", |
| &ddw_avail[0], DDW_APPLICABLE_SIZE); |
| if (ret) |
| return 0; |
| |
| if (win->length >= sizeof(struct dynamic_dma_window_prop)) |
| remove_dma_window(np, ddw_avail, win, cleanup); |
| |
| if (!remove_prop) |
| return 0; |
| |
| /* Default window property if removed is lost as reset-pe doesn't restore it. |
| * Though FDT has a copy of it, the DLPAR hotplugged devices will not have a |
| * node on FDT until next reboot. So, back it up. |
| */ |
| if ((strcmp(win_name, "ibm,dma-window") == 0) && |
| !of_find_property(np, "ibm,dma-window-saved", NULL)) |
| copy_property(np, win_name, "ibm,dma-window-saved"); |
| |
| ret = of_remove_property(np, win); |
| if (ret) |
| pr_warn("%pOF: failed to remove DMA window property: %d\n", |
| np, ret); |
| return 0; |
| } |
| |
| static bool find_existing_ddw(struct device_node *pdn, u64 *dma_addr, int *window_shift, |
| bool *direct_mapping) |
| { |
| struct dma_win *window; |
| const struct dynamic_dma_window_prop *dma64; |
| bool found = false; |
| |
| spin_lock(&dma_win_list_lock); |
| /* check if we already created a window and dupe that config if so */ |
| list_for_each_entry(window, &dma_win_list, list) { |
| if (window->device == pdn) { |
| dma64 = window->prop; |
| *dma_addr = be64_to_cpu(dma64->dma_base); |
| *window_shift = be32_to_cpu(dma64->window_shift); |
| *direct_mapping = window->direct; |
| found = true; |
| break; |
| } |
| } |
| spin_unlock(&dma_win_list_lock); |
| |
| return found; |
| } |
| |
| static struct dma_win *ddw_list_new_entry(struct device_node *pdn, |
| const struct dynamic_dma_window_prop *dma64) |
| { |
| struct dma_win *window; |
| |
| window = kzalloc(sizeof(*window), GFP_KERNEL); |
| if (!window) |
| return NULL; |
| |
| window->device = pdn; |
| window->prop = dma64; |
| window->direct = false; |
| |
| return window; |
| } |
| |
| static void find_existing_ddw_windows_named(const char *name) |
| { |
| int len; |
| struct device_node *pdn; |
| struct dma_win *window; |
| const struct dynamic_dma_window_prop *dma64; |
| |
| for_each_node_with_property(pdn, name) { |
| dma64 = of_get_property(pdn, name, &len); |
| if (!dma64 || len < sizeof(*dma64)) { |
| remove_dma_window_named(pdn, true, name, true); |
| continue; |
| } |
| |
| /* If at the time of system initialization, there are DDWs in OF, |
| * it means this is during kexec. DDW could be direct or dynamic. |
| * We will just mark DDWs as "dynamic" since this is kdump path, |
| * no need to worry about perforance. ddw_list_new_entry() will |
| * set window->direct = false. |
| */ |
| window = ddw_list_new_entry(pdn, dma64); |
| if (!window) { |
| of_node_put(pdn); |
| break; |
| } |
| |
| spin_lock(&dma_win_list_lock); |
| list_add(&window->list, &dma_win_list); |
| spin_unlock(&dma_win_list_lock); |
| } |
| } |
| |
| static int find_existing_ddw_windows(void) |
| { |
| if (!firmware_has_feature(FW_FEATURE_LPAR)) |
| return 0; |
| |
| find_existing_ddw_windows_named(DIRECT64_PROPNAME); |
| find_existing_ddw_windows_named(DMA64_PROPNAME); |
| |
| return 0; |
| } |
| machine_arch_initcall(pseries, find_existing_ddw_windows); |
| |
| /** |
| * ddw_read_ext - Get the value of an DDW extension |
| * @np: device node from which the extension value is to be read. |
| * @extnum: index number of the extension. |
| * @value: pointer to return value, modified when extension is available. |
| * |
| * Checks if "ibm,ddw-extensions" exists for this node, and get the value |
| * on index 'extnum'. |
| * It can be used only to check if a property exists, passing value == NULL. |
| * |
| * Returns: |
| * 0 if extension successfully read |
| * -EINVAL if the "ibm,ddw-extensions" does not exist, |
| * -ENODATA if "ibm,ddw-extensions" does not have a value, and |
| * -EOVERFLOW if "ibm,ddw-extensions" does not contain this extension. |
| */ |
| static inline int ddw_read_ext(const struct device_node *np, int extnum, |
| u32 *value) |
| { |
| static const char propname[] = "ibm,ddw-extensions"; |
| u32 count; |
| int ret; |
| |
| ret = of_property_read_u32_index(np, propname, DDW_EXT_SIZE, &count); |
| if (ret) |
| return ret; |
| |
| if (count < extnum) |
| return -EOVERFLOW; |
| |
| if (!value) |
| value = &count; |
| |
| return of_property_read_u32_index(np, propname, extnum, value); |
| } |
| |
| static int query_ddw(struct pci_dev *dev, const u32 *ddw_avail, |
| struct ddw_query_response *query, |
| struct device_node *parent) |
| { |
| struct device_node *dn; |
| struct pci_dn *pdn; |
| u32 cfg_addr, ext_query, query_out[5]; |
| u64 buid; |
| int ret, out_sz; |
| |
| /* |
| * From LoPAR level 2.8, "ibm,ddw-extensions" index 3 can rule how many |
| * output parameters ibm,query-pe-dma-windows will have, ranging from |
| * 5 to 6. |
| */ |
| ret = ddw_read_ext(parent, DDW_EXT_QUERY_OUT_SIZE, &ext_query); |
| if (!ret && ext_query == 1) |
| out_sz = 6; |
| else |
| out_sz = 5; |
| |
| /* |
| * Get the config address and phb buid of the PE window. |
| * Rely on eeh to retrieve this for us. |
| * Retrieve them from the pci device, not the node with the |
| * dma-window property |
| */ |
| dn = pci_device_to_OF_node(dev); |
| pdn = PCI_DN(dn); |
| buid = pdn->phb->buid; |
| cfg_addr = ((pdn->busno << 16) | (pdn->devfn << 8)); |
| |
| ret = rtas_call(ddw_avail[DDW_QUERY_PE_DMA_WIN], 3, out_sz, query_out, |
| cfg_addr, BUID_HI(buid), BUID_LO(buid)); |
| |
| switch (out_sz) { |
| case 5: |
| query->windows_available = query_out[0]; |
| query->largest_available_block = query_out[1]; |
| query->page_size = query_out[2]; |
| query->migration_capable = query_out[3]; |
| break; |
| case 6: |
| query->windows_available = query_out[0]; |
| query->largest_available_block = ((u64)query_out[1] << 32) | |
| query_out[2]; |
| query->page_size = query_out[3]; |
| query->migration_capable = query_out[4]; |
| break; |
| } |
| |
| dev_info(&dev->dev, "ibm,query-pe-dma-windows(%x) %x %x %x returned %d, lb=%llx ps=%x wn=%d\n", |
| ddw_avail[DDW_QUERY_PE_DMA_WIN], cfg_addr, BUID_HI(buid), |
| BUID_LO(buid), ret, query->largest_available_block, |
| query->page_size, query->windows_available); |
| |
| return ret; |
| } |
| |
| static int create_ddw(struct pci_dev *dev, const u32 *ddw_avail, |
| struct ddw_create_response *create, int page_shift, |
| int window_shift) |
| { |
| struct device_node *dn; |
| struct pci_dn *pdn; |
| u32 cfg_addr; |
| u64 buid; |
| int ret; |
| |
| /* |
| * Get the config address and phb buid of the PE window. |
| * Rely on eeh to retrieve this for us. |
| * Retrieve them from the pci device, not the node with the |
| * dma-window property |
| */ |
| dn = pci_device_to_OF_node(dev); |
| pdn = PCI_DN(dn); |
| buid = pdn->phb->buid; |
| cfg_addr = ((pdn->busno << 16) | (pdn->devfn << 8)); |
| |
| do { |
| /* extra outputs are LIOBN and dma-addr (hi, lo) */ |
| ret = rtas_call(ddw_avail[DDW_CREATE_PE_DMA_WIN], 5, 4, |
| (u32 *)create, cfg_addr, BUID_HI(buid), |
| BUID_LO(buid), page_shift, window_shift); |
| } while (rtas_busy_delay(ret)); |
| dev_info(&dev->dev, |
| "ibm,create-pe-dma-window(%x) %x %x %x %x %x returned %d " |
| "(liobn = 0x%x starting addr = %x %x)\n", |
| ddw_avail[DDW_CREATE_PE_DMA_WIN], cfg_addr, BUID_HI(buid), |
| BUID_LO(buid), page_shift, window_shift, ret, create->liobn, |
| create->addr_hi, create->addr_lo); |
| |
| return ret; |
| } |
| |
| struct failed_ddw_pdn { |
| struct device_node *pdn; |
| struct list_head list; |
| }; |
| |
| static LIST_HEAD(failed_ddw_pdn_list); |
| |
| static phys_addr_t ddw_memory_hotplug_max(void) |
| { |
| resource_size_t max_addr = memory_hotplug_max(); |
| struct device_node *memory; |
| |
| for_each_node_by_type(memory, "memory") { |
| struct resource res; |
| |
| if (of_address_to_resource(memory, 0, &res)) |
| continue; |
| |
| max_addr = max_t(resource_size_t, max_addr, res.end + 1); |
| } |
| |
| return max_addr; |
| } |
| |
| /* |
| * Platforms supporting the DDW option starting with LoPAR level 2.7 implement |
| * ibm,ddw-extensions, which carries the rtas token for |
| * ibm,reset-pe-dma-windows. |
| * That rtas-call can be used to restore the default DMA window for the device. |
| */ |
| static void reset_dma_window(struct pci_dev *dev, struct device_node *par_dn) |
| { |
| int ret; |
| u32 cfg_addr, reset_dma_win; |
| u64 buid; |
| struct device_node *dn; |
| struct pci_dn *pdn; |
| |
| ret = ddw_read_ext(par_dn, DDW_EXT_RESET_DMA_WIN, &reset_dma_win); |
| if (ret) |
| return; |
| |
| dn = pci_device_to_OF_node(dev); |
| pdn = PCI_DN(dn); |
| buid = pdn->phb->buid; |
| cfg_addr = (pdn->busno << 16) | (pdn->devfn << 8); |
| |
| ret = rtas_call(reset_dma_win, 3, 1, NULL, cfg_addr, BUID_HI(buid), |
| BUID_LO(buid)); |
| if (ret) |
| dev_info(&dev->dev, |
| "ibm,reset-pe-dma-windows(%x) %x %x %x returned %d ", |
| reset_dma_win, cfg_addr, BUID_HI(buid), BUID_LO(buid), |
| ret); |
| } |
| |
| /* Return largest page shift based on "IO Page Sizes" output of ibm,query-pe-dma-window. */ |
| static int iommu_get_page_shift(u32 query_page_size) |
| { |
| /* Supported IO page-sizes according to LoPAR, note that 2M is out of order */ |
| const int shift[] = { |
| __builtin_ctzll(SZ_4K), __builtin_ctzll(SZ_64K), __builtin_ctzll(SZ_16M), |
| __builtin_ctzll(SZ_32M), __builtin_ctzll(SZ_64M), __builtin_ctzll(SZ_128M), |
| __builtin_ctzll(SZ_256M), __builtin_ctzll(SZ_16G), __builtin_ctzll(SZ_2M) |
| }; |
| |
| int i = ARRAY_SIZE(shift) - 1; |
| int ret = 0; |
| |
| /* |
| * On LoPAR, ibm,query-pe-dma-window outputs "IO Page Sizes" using a bit field: |
| * - bit 31 means 4k pages are supported, |
| * - bit 30 means 64k pages are supported, and so on. |
| * Larger pagesizes map more memory with the same amount of TCEs, so start probing them. |
| */ |
| for (; i >= 0 ; i--) { |
| if (query_page_size & (1 << i)) |
| ret = max(ret, shift[i]); |
| } |
| |
| return ret; |
| } |
| |
| static struct property *ddw_property_create(const char *propname, u32 liobn, u64 dma_addr, |
| u32 page_shift, u32 window_shift) |
| { |
| struct dynamic_dma_window_prop *ddwprop; |
| struct property *win64; |
| |
| win64 = kzalloc(sizeof(*win64), GFP_KERNEL); |
| if (!win64) |
| return NULL; |
| |
| win64->name = kstrdup(propname, GFP_KERNEL); |
| ddwprop = kzalloc(sizeof(*ddwprop), GFP_KERNEL); |
| win64->value = ddwprop; |
| win64->length = sizeof(*ddwprop); |
| if (!win64->name || !win64->value) { |
| kfree(win64->name); |
| kfree(win64->value); |
| kfree(win64); |
| return NULL; |
| } |
| |
| ddwprop->liobn = cpu_to_be32(liobn); |
| ddwprop->dma_base = cpu_to_be64(dma_addr); |
| ddwprop->tce_shift = cpu_to_be32(page_shift); |
| ddwprop->window_shift = cpu_to_be32(window_shift); |
| |
| return win64; |
| } |
| |
| /* |
| * If the PE supports dynamic dma windows, and there is space for a table |
| * that can map all pages in a linear offset, then setup such a table, |
| * and record the dma-offset in the struct device. |
| * |
| * dev: the pci device we are checking |
| * pdn: the parent pe node with the ibm,dma_window property |
| * Future: also check if we can remap the base window for our base page size |
| * |
| * returns true if can map all pages (direct mapping), false otherwise.. |
| */ |
| static bool enable_ddw(struct pci_dev *dev, struct device_node *pdn) |
| { |
| int len = 0, ret; |
| int max_ram_len = order_base_2(ddw_memory_hotplug_max()); |
| struct ddw_query_response query; |
| struct ddw_create_response create; |
| int page_shift; |
| u64 win_addr, dynamic_offset = 0; |
| const char *win_name; |
| struct device_node *dn; |
| u32 ddw_avail[DDW_APPLICABLE_SIZE]; |
| struct dma_win *window; |
| struct property *win64; |
| struct failed_ddw_pdn *fpdn; |
| bool default_win_removed = false, direct_mapping = false; |
| bool dynamic_mapping = false; |
| bool pmem_present; |
| struct pci_dn *pci = PCI_DN(pdn); |
| struct property *default_win = NULL; |
| |
| dn = of_find_node_by_type(NULL, "ibm,pmemory"); |
| pmem_present = dn != NULL; |
| of_node_put(dn); |
| |
| mutex_lock(&dma_win_init_mutex); |
| |
| if (find_existing_ddw(pdn, &dev->dev.archdata.dma_offset, &len, &direct_mapping)) |
| goto out_unlock; |
| |
| /* |
| * If we already went through this for a previous function of |
| * the same device and failed, we don't want to muck with the |
| * DMA window again, as it will race with in-flight operations |
| * and can lead to EEHs. The above mutex protects access to the |
| * list. |
| */ |
| list_for_each_entry(fpdn, &failed_ddw_pdn_list, list) { |
| if (fpdn->pdn == pdn) |
| goto out_unlock; |
| } |
| |
| /* |
| * the ibm,ddw-applicable property holds the tokens for: |
| * ibm,query-pe-dma-window |
| * ibm,create-pe-dma-window |
| * ibm,remove-pe-dma-window |
| * for the given node in that order. |
| * the property is actually in the parent, not the PE |
| */ |
| ret = of_property_read_u32_array(pdn, "ibm,ddw-applicable", |
| &ddw_avail[0], DDW_APPLICABLE_SIZE); |
| if (ret) |
| goto out_failed; |
| |
| /* |
| * Query if there is a second window of size to map the |
| * whole partition. Query returns number of windows, largest |
| * block assigned to PE (partition endpoint), and two bitmasks |
| * of page sizes: supported and supported for migrate-dma. |
| */ |
| dn = pci_device_to_OF_node(dev); |
| ret = query_ddw(dev, ddw_avail, &query, pdn); |
| if (ret != 0) |
| goto out_failed; |
| |
| /* |
| * If there is no window available, remove the default DMA window, |
| * if it's present. This will make all the resources available to the |
| * new DDW window. |
| * If anything fails after this, we need to restore it, so also check |
| * for extensions presence. |
| */ |
| if (query.windows_available == 0) { |
| int reset_win_ext; |
| |
| /* DDW + IOMMU on single window may fail if there is any allocation */ |
| if (iommu_table_in_use(pci->table_group->tables[0])) { |
| dev_warn(&dev->dev, "current IOMMU table in use, can't be replaced.\n"); |
| goto out_failed; |
| } |
| |
| default_win = of_find_property(pdn, "ibm,dma-window", NULL); |
| if (!default_win) |
| goto out_failed; |
| |
| reset_win_ext = ddw_read_ext(pdn, DDW_EXT_RESET_DMA_WIN, NULL); |
| if (reset_win_ext) |
| goto out_failed; |
| |
| remove_dma_window(pdn, ddw_avail, default_win, true); |
| default_win_removed = true; |
| |
| /* Query again, to check if the window is available */ |
| ret = query_ddw(dev, ddw_avail, &query, pdn); |
| if (ret != 0) |
| goto out_failed; |
| |
| if (query.windows_available == 0) { |
| /* no windows are available for this device. */ |
| dev_dbg(&dev->dev, "no free dynamic windows"); |
| goto out_failed; |
| } |
| } |
| |
| page_shift = iommu_get_page_shift(query.page_size); |
| if (!page_shift) { |
| dev_dbg(&dev->dev, "no supported page size in mask %x", |
| query.page_size); |
| goto out_failed; |
| } |
| |
| /* |
| * The "ibm,pmemory" can appear anywhere in the address space. |
| * Assuming it is still backed by page structs, try MAX_PHYSMEM_BITS |
| * for the upper limit and fallback to max RAM otherwise but this |
| * disables device::dma_ops_bypass. |
| */ |
| len = max_ram_len; |
| if (pmem_present) { |
| if (query.largest_available_block >= |
| (1ULL << (MAX_PHYSMEM_BITS - page_shift))) |
| len = MAX_PHYSMEM_BITS; |
| else |
| dev_info(&dev->dev, "Skipping ibm,pmemory"); |
| } |
| |
| /* check if the available block * number of ptes will map everything */ |
| if (query.largest_available_block < (1ULL << (len - page_shift))) { |
| dev_dbg(&dev->dev, |
| "can't map partition max 0x%llx with %llu %llu-sized pages\n", |
| 1ULL << len, |
| query.largest_available_block, |
| 1ULL << page_shift); |
| |
| len = order_base_2(query.largest_available_block << page_shift); |
| |
| dynamic_mapping = true; |
| } else { |
| direct_mapping = !default_win_removed || |
| (len == MAX_PHYSMEM_BITS) || |
| (!pmem_present && (len == max_ram_len)); |
| |
| /* DDW is big enough to direct map RAM. If there is vPMEM, check |
| * if enough space is left in DDW where we can dynamically |
| * allocate TCEs for vPMEM. For now, this Hybrid sharing of DDW |
| * is only for SR-IOV devices. |
| */ |
| if (default_win_removed && pmem_present && !direct_mapping) { |
| /* DDW is big enough to be split */ |
| if ((query.largest_available_block << page_shift) >= |
| MIN_DDW_VPMEM_DMA_WINDOW + (1ULL << max_ram_len)) { |
| direct_mapping = true; |
| |
| /* offset of the Dynamic part of DDW */ |
| dynamic_offset = 1ULL << max_ram_len; |
| } |
| |
| /* DDW will at least have dynamic allocation */ |
| dynamic_mapping = true; |
| |
| /* create max size DDW possible */ |
| len = order_base_2(query.largest_available_block |
| << page_shift); |
| } |
| } |
| |
| /* Even if the DDW is split into both direct mapped RAM and dynamically |
| * mapped vPMEM, the DDW property in OF will be marked as Direct. |
| */ |
| win_name = direct_mapping ? DIRECT64_PROPNAME : DMA64_PROPNAME; |
| |
| ret = create_ddw(dev, ddw_avail, &create, page_shift, len); |
| if (ret != 0) |
| goto out_failed; |
| |
| dev_dbg(&dev->dev, "created tce table LIOBN 0x%x for %pOF\n", |
| create.liobn, dn); |
| |
| win_addr = ((u64)create.addr_hi << 32) | create.addr_lo; |
| win64 = ddw_property_create(win_name, create.liobn, win_addr, page_shift, len); |
| |
| if (!win64) { |
| dev_info(&dev->dev, |
| "couldn't allocate property, property name, or value\n"); |
| goto out_remove_win; |
| } |
| |
| ret = of_add_property(pdn, win64); |
| if (ret) { |
| dev_err(&dev->dev, "unable to add DMA window property for %pOF: %d", |
| pdn, ret); |
| goto out_free_prop; |
| } |
| |
| window = ddw_list_new_entry(pdn, win64->value); |
| if (!window) |
| goto out_del_prop; |
| |
| window->direct = direct_mapping; |
| |
| if (direct_mapping) { |
| /* DDW maps the whole partition, so enable direct DMA mapping */ |
| ret = walk_system_ram_range(0, memblock_end_of_DRAM() >> PAGE_SHIFT, |
| win64->value, tce_setrange_multi_pSeriesLP_walk); |
| if (ret) { |
| dev_info(&dev->dev, "failed to map DMA window for %pOF: %d\n", |
| dn, ret); |
| |
| /* Make sure to clean DDW if any TCE was set*/ |
| clean_dma_window(pdn, win64->value); |
| goto out_del_list; |
| } |
| if (default_win_removed) { |
| iommu_tce_table_put(pci->table_group->tables[0]); |
| pci->table_group->tables[0] = NULL; |
| set_iommu_table_base(&dev->dev, NULL); |
| } |
| } |
| |
| if (dynamic_mapping) { |
| struct iommu_table *newtbl; |
| int i; |
| unsigned long start = 0, end = 0; |
| u64 dynamic_addr, dynamic_len; |
| |
| for (i = 0; i < ARRAY_SIZE(pci->phb->mem_resources); i++) { |
| const unsigned long mask = IORESOURCE_MEM_64 | IORESOURCE_MEM; |
| |
| /* Look for MMIO32 */ |
| if ((pci->phb->mem_resources[i].flags & mask) == IORESOURCE_MEM) { |
| start = pci->phb->mem_resources[i].start; |
| end = pci->phb->mem_resources[i].end; |
| break; |
| } |
| } |
| |
| /* New table for using DDW instead of the default DMA window */ |
| newtbl = iommu_pseries_alloc_table(pci->phb->node); |
| if (!newtbl) { |
| dev_dbg(&dev->dev, "couldn't create new IOMMU table\n"); |
| goto out_del_list; |
| } |
| |
| /* If the DDW is split between directly mapped RAM and Dynamic |
| * mapped for TCES, offset into the DDW where the dynamic part |
| * begins. |
| */ |
| dynamic_addr = win_addr + dynamic_offset; |
| dynamic_len = (1UL << len) - dynamic_offset; |
| iommu_table_setparms_common(newtbl, pci->phb->bus->number, create.liobn, |
| dynamic_addr, dynamic_len, page_shift, NULL, |
| &iommu_table_lpar_multi_ops); |
| iommu_init_table(newtbl, pci->phb->node, start, end); |
| |
| pci->table_group->tables[default_win_removed ? 0 : 1] = newtbl; |
| |
| set_iommu_table_base(&dev->dev, newtbl); |
| } |
| |
| if (default_win_removed) { |
| /* default_win is valid here because default_win_removed == true */ |
| if (!of_find_property(pdn, "ibm,dma-window-saved", NULL)) |
| copy_property(pdn, "ibm,dma-window", "ibm,dma-window-saved"); |
| of_remove_property(pdn, default_win); |
| dev_info(&dev->dev, "Removed default DMA window for %pOF\n", pdn); |
| } |
| |
| spin_lock(&dma_win_list_lock); |
| list_add(&window->list, &dma_win_list); |
| spin_unlock(&dma_win_list_lock); |
| |
| dev->dev.archdata.dma_offset = win_addr; |
| goto out_unlock; |
| |
| out_del_list: |
| kfree(window); |
| |
| out_del_prop: |
| of_remove_property(pdn, win64); |
| |
| out_free_prop: |
| kfree(win64->name); |
| kfree(win64->value); |
| kfree(win64); |
| |
| out_remove_win: |
| /* DDW is clean, so it's ok to call this directly. */ |
| __remove_dma_window(pdn, ddw_avail, create.liobn); |
| |
| out_failed: |
| if (default_win_removed) |
| reset_dma_window(dev, pdn); |
| |
| fpdn = kzalloc(sizeof(*fpdn), GFP_KERNEL); |
| if (!fpdn) |
| goto out_unlock; |
| fpdn->pdn = pdn; |
| list_add(&fpdn->list, &failed_ddw_pdn_list); |
| |
| out_unlock: |
| mutex_unlock(&dma_win_init_mutex); |
| |
| /* If we have persistent memory and the window size is not big enough |
| * to directly map both RAM and vPMEM, then we need to set DMA limit. |
| */ |
| if (pmem_present && direct_mapping && len != MAX_PHYSMEM_BITS) |
| dev->dev.bus_dma_limit = dev->dev.archdata.dma_offset + |
| (1ULL << max_ram_len); |
| |
| return direct_mapping; |
| } |
| |
| static __u64 query_page_size_to_mask(u32 query_page_size) |
| { |
| const long shift[] = { |
| (SZ_4K), (SZ_64K), (SZ_16M), |
| (SZ_32M), (SZ_64M), (SZ_128M), |
| (SZ_256M), (SZ_16G), (SZ_2M) |
| }; |
| int i, ret = 0; |
| |
| for (i = 0; i < ARRAY_SIZE(shift); i++) { |
| if (query_page_size & (1 << i)) |
| ret |= shift[i]; |
| } |
| |
| return ret; |
| } |
| |
| static void spapr_tce_init_table_group(struct pci_dev *pdev, |
| struct device_node *pdn, |
| struct dynamic_dma_window_prop prop) |
| { |
| struct iommu_table_group *table_group = PCI_DN(pdn)->table_group; |
| u32 ddw_avail[DDW_APPLICABLE_SIZE]; |
| |
| struct ddw_query_response query; |
| int ret; |
| |
| /* Only for normal boot with default window. Doesn't matter during |
| * kdump, since these will not be used during kdump. |
| */ |
| if (is_kdump_kernel()) |
| return; |
| |
| if (table_group->max_dynamic_windows_supported != 0) |
| return; /* already initialized */ |
| |
| table_group->tce32_start = be64_to_cpu(prop.dma_base); |
| table_group->tce32_size = 1 << be32_to_cpu(prop.window_shift); |
| |
| if (!of_find_property(pdn, "ibm,dma-window", NULL)) |
| dev_err(&pdev->dev, "default dma window missing!\n"); |
| |
| ret = of_property_read_u32_array(pdn, "ibm,ddw-applicable", |
| &ddw_avail[0], DDW_APPLICABLE_SIZE); |
| if (ret) { |
| table_group->max_dynamic_windows_supported = -1; |
| return; |
| } |
| |
| ret = query_ddw(pdev, ddw_avail, &query, pdn); |
| if (ret) { |
| dev_err(&pdev->dev, "%s: query_ddw failed\n", __func__); |
| table_group->max_dynamic_windows_supported = -1; |
| return; |
| } |
| |
| if (query.windows_available == 0) |
| table_group->max_dynamic_windows_supported = 1; |
| else |
| table_group->max_dynamic_windows_supported = IOMMU_TABLE_GROUP_MAX_TABLES; |
| |
| table_group->max_levels = 1; |
| table_group->pgsizes |= query_page_size_to_mask(query.page_size); |
| } |
| |
| static void pci_dma_dev_setup_pSeriesLP(struct pci_dev *dev) |
| { |
| struct device_node *pdn, *dn; |
| struct iommu_table *tbl; |
| struct pci_dn *pci; |
| struct dynamic_dma_window_prop prop; |
| |
| pr_debug("pci_dma_dev_setup_pSeriesLP: %s\n", pci_name(dev)); |
| |
| /* dev setup for LPAR is a little tricky, since the device tree might |
| * contain the dma-window properties per-device and not necessarily |
| * for the bus. So we need to search upwards in the tree until we |
| * either hit a dma-window property, OR find a parent with a table |
| * already allocated. |
| */ |
| dn = pci_device_to_OF_node(dev); |
| pr_debug(" node is %pOF\n", dn); |
| |
| pdn = pci_dma_find(dn, &prop); |
| if (!pdn || !PCI_DN(pdn)) { |
| printk(KERN_WARNING "pci_dma_dev_setup_pSeriesLP: " |
| "no DMA window found for pci dev=%s dn=%pOF\n", |
| pci_name(dev), dn); |
| return; |
| } |
| pr_debug(" parent is %pOF\n", pdn); |
| |
| pci = PCI_DN(pdn); |
| if (!pci->table_group) { |
| pci->table_group = iommu_pseries_alloc_group(pci->phb->node); |
| tbl = pci->table_group->tables[0]; |
| |
| iommu_table_setparms_common(tbl, pci->phb->bus->number, |
| be32_to_cpu(prop.liobn), |
| be64_to_cpu(prop.dma_base), |
| 1ULL << be32_to_cpu(prop.window_shift), |
| be32_to_cpu(prop.tce_shift), NULL, |
| &iommu_table_lpar_multi_ops); |
| |
| iommu_init_table(tbl, pci->phb->node, 0, 0); |
| iommu_register_group(pci->table_group, |
| pci_domain_nr(pci->phb->bus), 0); |
| pr_debug(" created table: %p\n", pci->table_group); |
| } else { |
| pr_debug(" found DMA window, table: %p\n", pci->table_group); |
| } |
| |
| spapr_tce_init_table_group(dev, pdn, prop); |
| |
| set_iommu_table_base(&dev->dev, pci->table_group->tables[0]); |
| iommu_add_device(pci->table_group, &dev->dev); |
| } |
| |
| static bool iommu_bypass_supported_pSeriesLP(struct pci_dev *pdev, u64 dma_mask) |
| { |
| struct device_node *dn = pci_device_to_OF_node(pdev), *pdn; |
| |
| /* only attempt to use a new window if 64-bit DMA is requested */ |
| if (dma_mask < DMA_BIT_MASK(64)) |
| return false; |
| |
| dev_dbg(&pdev->dev, "node is %pOF\n", dn); |
| |
| /* |
| * the device tree might contain the dma-window properties |
| * per-device and not necessarily for the bus. So we need to |
| * search upwards in the tree until we either hit a dma-window |
| * property, OR find a parent with a table already allocated. |
| */ |
| pdn = pci_dma_find(dn, NULL); |
| if (pdn && PCI_DN(pdn)) |
| return enable_ddw(pdev, pdn); |
| |
| return false; |
| } |
| |
| #ifdef CONFIG_IOMMU_API |
| /* |
| * A simple iommu_table_group_ops which only allows reusing the existing |
| * iommu_table. This handles VFIO for POWER7 or the nested KVM. |
| * The ops does not allow creating windows and only allows reusing the existing |
| * one if it matches table_group->tce32_start/tce32_size/page_shift. |
| */ |
| static unsigned long spapr_tce_get_table_size(__u32 page_shift, |
| __u64 window_size, __u32 levels) |
| { |
| unsigned long size; |
| |
| if (levels > 1) |
| return ~0U; |
| size = window_size >> (page_shift - 3); |
| return size; |
| } |
| |
| static struct pci_dev *iommu_group_get_first_pci_dev(struct iommu_group *group) |
| { |
| struct pci_dev *pdev = NULL; |
| int ret; |
| |
| /* No IOMMU group ? */ |
| if (!group) |
| return NULL; |
| |
| ret = iommu_group_for_each_dev(group, &pdev, dev_has_iommu_table); |
| if (!ret || !pdev) |
| return NULL; |
| return pdev; |
| } |
| |
| static void restore_default_dma_window(struct pci_dev *pdev, struct device_node *pdn) |
| { |
| reset_dma_window(pdev, pdn); |
| copy_property(pdn, "ibm,dma-window-saved", "ibm,dma-window"); |
| } |
| |
| static long remove_dynamic_dma_windows(struct pci_dev *pdev, struct device_node *pdn) |
| { |
| struct pci_dn *pci = PCI_DN(pdn); |
| struct dma_win *window; |
| bool direct_mapping; |
| int len; |
| |
| if (find_existing_ddw(pdn, &pdev->dev.archdata.dma_offset, &len, &direct_mapping)) { |
| remove_dma_window_named(pdn, true, direct_mapping ? |
| DIRECT64_PROPNAME : DMA64_PROPNAME, true); |
| if (!direct_mapping) { |
| WARN_ON(!pci->table_group->tables[0] && !pci->table_group->tables[1]); |
| |
| if (pci->table_group->tables[1]) { |
| iommu_tce_table_put(pci->table_group->tables[1]); |
| pci->table_group->tables[1] = NULL; |
| } else if (pci->table_group->tables[0]) { |
| /* Default window was removed and only the DDW exists */ |
| iommu_tce_table_put(pci->table_group->tables[0]); |
| pci->table_group->tables[0] = NULL; |
| } |
| } |
| spin_lock(&dma_win_list_lock); |
| list_for_each_entry(window, &dma_win_list, list) { |
| if (window->device == pdn) { |
| list_del(&window->list); |
| kfree(window); |
| break; |
| } |
| } |
| spin_unlock(&dma_win_list_lock); |
| } |
| |
| return 0; |
| } |
| |
| static long pseries_setup_default_iommu_config(struct iommu_table_group *table_group, |
| struct device *dev) |
| { |
| struct pci_dev *pdev = to_pci_dev(dev); |
| const __be32 *default_prop; |
| long liobn, offset, size; |
| struct device_node *pdn; |
| struct iommu_table *tbl; |
| struct pci_dn *pci; |
| |
| pdn = pci_dma_find_parent_node(pdev, table_group); |
| if (!pdn || !PCI_DN(pdn)) { |
| dev_warn(&pdev->dev, "No table_group configured for the node %pOF\n", pdn); |
| return -1; |
| } |
| pci = PCI_DN(pdn); |
| |
| /* The default window is restored if not present already on removal of DDW. |
| * However, if used by VFIO SPAPR sub driver, the user's order of removal of |
| * windows might have been different to not leading to auto restoration, |
| * suppose the DDW was removed first followed by the default one. |
| * So, restore the default window with reset-pe-dma call explicitly. |
| */ |
| restore_default_dma_window(pdev, pdn); |
| |
| default_prop = of_get_property(pdn, "ibm,dma-window", NULL); |
| of_parse_dma_window(pdn, default_prop, &liobn, &offset, &size); |
| tbl = iommu_pseries_alloc_table(pci->phb->node); |
| if (!tbl) { |
| dev_err(&pdev->dev, "couldn't create new IOMMU table\n"); |
| return -1; |
| } |
| |
| iommu_table_setparms_common(tbl, pci->phb->bus->number, liobn, offset, |
| size, IOMMU_PAGE_SHIFT_4K, NULL, |
| &iommu_table_lpar_multi_ops); |
| iommu_init_table(tbl, pci->phb->node, 0, 0); |
| |
| pci->table_group->tables[0] = tbl; |
| set_iommu_table_base(&pdev->dev, tbl); |
| |
| return 0; |
| } |
| |
| static bool is_default_window_request(struct iommu_table_group *table_group, __u32 page_shift, |
| __u64 window_size) |
| { |
| if ((window_size <= table_group->tce32_size) && |
| (page_shift == IOMMU_PAGE_SHIFT_4K)) |
| return true; |
| |
| return false; |
| } |
| |
| static long spapr_tce_create_table(struct iommu_table_group *table_group, int num, |
| __u32 page_shift, __u64 window_size, __u32 levels, |
| struct iommu_table **ptbl) |
| { |
| struct pci_dev *pdev = iommu_group_get_first_pci_dev(table_group->group); |
| u32 ddw_avail[DDW_APPLICABLE_SIZE]; |
| struct ddw_create_response create; |
| unsigned long liobn, offset, size; |
| unsigned long start = 0, end = 0; |
| struct ddw_query_response query; |
| const __be32 *default_prop; |
| struct failed_ddw_pdn *fpdn; |
| unsigned int window_shift; |
| struct device_node *pdn; |
| struct iommu_table *tbl; |
| struct dma_win *window; |
| struct property *win64; |
| struct pci_dn *pci; |
| u64 win_addr; |
| int len, i; |
| long ret; |
| |
| if (!is_power_of_2(window_size) || levels > 1) |
| return -EINVAL; |
| |
| window_shift = order_base_2(window_size); |
| |
| mutex_lock(&dma_win_init_mutex); |
| |
| ret = -ENODEV; |
| |
| pdn = pci_dma_find_parent_node(pdev, table_group); |
| if (!pdn || !PCI_DN(pdn)) { /* Niether of 32s|64-bit exist! */ |
| dev_warn(&pdev->dev, "No dma-windows exist for the node %pOF\n", pdn); |
| goto out_failed; |
| } |
| pci = PCI_DN(pdn); |
| |
| /* If the enable DDW failed for the pdn, dont retry! */ |
| list_for_each_entry(fpdn, &failed_ddw_pdn_list, list) { |
| if (fpdn->pdn == pdn) { |
| dev_info(&pdev->dev, "%pOF in failed DDW device list\n", pdn); |
| goto out_unlock; |
| } |
| } |
| |
| tbl = iommu_pseries_alloc_table(pci->phb->node); |
| if (!tbl) { |
| dev_dbg(&pdev->dev, "couldn't create new IOMMU table\n"); |
| goto out_unlock; |
| } |
| |
| if (num == 0) { |
| bool direct_mapping; |
| /* The request is not for default window? Ensure there is no DDW window already */ |
| if (!is_default_window_request(table_group, page_shift, window_size)) { |
| if (find_existing_ddw(pdn, &pdev->dev.archdata.dma_offset, &len, |
| &direct_mapping)) { |
| dev_warn(&pdev->dev, "%pOF: 64-bit window already present.", pdn); |
| ret = -EPERM; |
| goto out_unlock; |
| } |
| } else { |
| /* Request is for Default window, ensure there is no DDW if there is a |
| * need to reset. reset-pe otherwise removes the DDW also |
| */ |
| default_prop = of_get_property(pdn, "ibm,dma-window", NULL); |
| if (!default_prop) { |
| if (find_existing_ddw(pdn, &pdev->dev.archdata.dma_offset, &len, |
| &direct_mapping)) { |
| dev_warn(&pdev->dev, "%pOF: Attempt to create window#0 when 64-bit window is present. Preventing the attempt as that would destroy the 64-bit window", |
| pdn); |
| ret = -EPERM; |
| goto out_unlock; |
| } |
| |
| restore_default_dma_window(pdev, pdn); |
| |
| default_prop = of_get_property(pdn, "ibm,dma-window", NULL); |
| of_parse_dma_window(pdn, default_prop, &liobn, &offset, &size); |
| /* Limit the default window size to window_size */ |
| iommu_table_setparms_common(tbl, pci->phb->bus->number, liobn, |
| offset, 1UL << window_shift, |
| IOMMU_PAGE_SHIFT_4K, NULL, |
| &iommu_table_lpar_multi_ops); |
| iommu_init_table(tbl, pci->phb->node, start, end); |
| |
| table_group->tables[0] = tbl; |
| |
| mutex_unlock(&dma_win_init_mutex); |
| |
| goto exit; |
| } |
| } |
| } |
| |
| ret = of_property_read_u32_array(pdn, "ibm,ddw-applicable", |
| &ddw_avail[0], DDW_APPLICABLE_SIZE); |
| if (ret) { |
| dev_info(&pdev->dev, "ibm,ddw-applicable not found\n"); |
| goto out_failed; |
| } |
| ret = -ENODEV; |
| |
| pr_err("%s: Calling query %pOF\n", __func__, pdn); |
| ret = query_ddw(pdev, ddw_avail, &query, pdn); |
| if (ret) |
| goto out_failed; |
| ret = -ENODEV; |
| |
| len = window_shift; |
| if (query.largest_available_block < (1ULL << (len - page_shift))) { |
| dev_dbg(&pdev->dev, "can't map window 0x%llx with %llu %llu-sized pages\n", |
| 1ULL << len, query.largest_available_block, |
| 1ULL << page_shift); |
| ret = -EINVAL; /* Retry with smaller window size */ |
| goto out_unlock; |
| } |
| |
| if (create_ddw(pdev, ddw_avail, &create, page_shift, len)) { |
| pr_err("%s: Create ddw failed %pOF\n", __func__, pdn); |
| goto out_failed; |
| } |
| |
| win_addr = ((u64)create.addr_hi << 32) | create.addr_lo; |
| win64 = ddw_property_create(DMA64_PROPNAME, create.liobn, win_addr, page_shift, len); |
| if (!win64) |
| goto remove_window; |
| |
| ret = of_add_property(pdn, win64); |
| if (ret) { |
| dev_err(&pdev->dev, "unable to add DMA window property for %pOF: %ld", pdn, ret); |
| goto free_property; |
| } |
| ret = -ENODEV; |
| |
| window = ddw_list_new_entry(pdn, win64->value); |
| if (!window) |
| goto remove_property; |
| |
| window->direct = false; |
| |
| for (i = 0; i < ARRAY_SIZE(pci->phb->mem_resources); i++) { |
| const unsigned long mask = IORESOURCE_MEM_64 | IORESOURCE_MEM; |
| |
| /* Look for MMIO32 */ |
| if ((pci->phb->mem_resources[i].flags & mask) == IORESOURCE_MEM) { |
| start = pci->phb->mem_resources[i].start; |
| end = pci->phb->mem_resources[i].end; |
| break; |
| } |
| } |
| |
| /* New table for using DDW instead of the default DMA window */ |
| iommu_table_setparms_common(tbl, pci->phb->bus->number, create.liobn, win_addr, |
| 1UL << len, page_shift, NULL, &iommu_table_lpar_multi_ops); |
| iommu_init_table(tbl, pci->phb->node, start, end); |
| |
| pci->table_group->tables[num] = tbl; |
| set_iommu_table_base(&pdev->dev, tbl); |
| pdev->dev.archdata.dma_offset = win_addr; |
| |
| spin_lock(&dma_win_list_lock); |
| list_add(&window->list, &dma_win_list); |
| spin_unlock(&dma_win_list_lock); |
| |
| mutex_unlock(&dma_win_init_mutex); |
| |
| goto exit; |
| |
| remove_property: |
| of_remove_property(pdn, win64); |
| free_property: |
| kfree(win64->name); |
| kfree(win64->value); |
| kfree(win64); |
| remove_window: |
| __remove_dma_window(pdn, ddw_avail, create.liobn); |
| |
| out_failed: |
| fpdn = kzalloc(sizeof(*fpdn), GFP_KERNEL); |
| if (!fpdn) |
| goto out_unlock; |
| fpdn->pdn = pdn; |
| list_add(&fpdn->list, &failed_ddw_pdn_list); |
| |
| out_unlock: |
| mutex_unlock(&dma_win_init_mutex); |
| |
| return ret; |
| exit: |
| /* Allocate the userspace view */ |
| pseries_tce_iommu_userspace_view_alloc(tbl); |
| tbl->it_allocated_size = spapr_tce_get_table_size(page_shift, window_size, levels); |
| |
| *ptbl = iommu_tce_table_get(tbl); |
| |
| return 0; |
| } |
| |
| static bool is_default_window_table(struct iommu_table_group *table_group, struct iommu_table *tbl) |
| { |
| if (((tbl->it_size << tbl->it_page_shift) <= table_group->tce32_size) && |
| (tbl->it_page_shift == IOMMU_PAGE_SHIFT_4K)) |
| return true; |
| |
| return false; |
| } |
| |
| static long spapr_tce_set_window(struct iommu_table_group *table_group, |
| int num, struct iommu_table *tbl) |
| { |
| return tbl == table_group->tables[num] ? 0 : -EPERM; |
| } |
| |
| static long spapr_tce_unset_window(struct iommu_table_group *table_group, int num) |
| { |
| struct pci_dev *pdev = iommu_group_get_first_pci_dev(table_group->group); |
| struct device_node *dn = pci_device_to_OF_node(pdev), *pdn; |
| struct iommu_table *tbl = table_group->tables[num]; |
| struct failed_ddw_pdn *fpdn; |
| struct dma_win *window; |
| const char *win_name; |
| int ret = -ENODEV; |
| |
| mutex_lock(&dma_win_init_mutex); |
| |
| if ((num == 0) && is_default_window_table(table_group, tbl)) |
| win_name = "ibm,dma-window"; |
| else |
| win_name = DMA64_PROPNAME; |
| |
| pdn = pci_dma_find(dn, NULL); |
| if (!pdn || !PCI_DN(pdn)) { /* Niether of 32s|64-bit exist! */ |
| dev_warn(&pdev->dev, "No dma-windows exist for the node %pOF\n", pdn); |
| goto out_failed; |
| } |
| |
| /* Dont clear the TCEs, User should have done it */ |
| if (remove_dma_window_named(pdn, true, win_name, false)) { |
| pr_err("%s: The existing DDW removal failed for node %pOF\n", __func__, pdn); |
| goto out_failed; /* Could not remove it either! */ |
| } |
| |
| if (strcmp(win_name, DMA64_PROPNAME) == 0) { |
| spin_lock(&dma_win_list_lock); |
| list_for_each_entry(window, &dma_win_list, list) { |
| if (window->device == pdn) { |
| list_del(&window->list); |
| kfree(window); |
| break; |
| } |
| } |
| spin_unlock(&dma_win_list_lock); |
| } |
| |
| iommu_tce_table_put(table_group->tables[num]); |
| table_group->tables[num] = NULL; |
| |
| ret = 0; |
| |
| goto out_unlock; |
| |
| out_failed: |
| fpdn = kzalloc(sizeof(*fpdn), GFP_KERNEL); |
| if (!fpdn) |
| goto out_unlock; |
| fpdn->pdn = pdn; |
| list_add(&fpdn->list, &failed_ddw_pdn_list); |
| |
| out_unlock: |
| mutex_unlock(&dma_win_init_mutex); |
| |
| return ret; |
| } |
| |
| static long spapr_tce_take_ownership(struct iommu_table_group *table_group, struct device *dev) |
| { |
| struct iommu_table *tbl = table_group->tables[0]; |
| struct pci_dev *pdev = to_pci_dev(dev); |
| struct device_node *dn = pci_device_to_OF_node(pdev); |
| struct device_node *pdn; |
| |
| /* SRIOV VFs using direct map by the host driver OR multifunction devices |
| * where the ownership was taken on the attempt by the first function |
| */ |
| if (!tbl && (table_group->max_dynamic_windows_supported != 1)) |
| return 0; |
| |
| mutex_lock(&dma_win_init_mutex); |
| |
| pdn = pci_dma_find(dn, NULL); |
| if (!pdn || !PCI_DN(pdn)) { /* Niether of 32s|64-bit exist! */ |
| dev_warn(&pdev->dev, "No dma-windows exist for the node %pOF\n", pdn); |
| mutex_unlock(&dma_win_init_mutex); |
| return -1; |
| } |
| |
| /* |
| * Though rtas call reset-pe removes the DDW, it doesn't clear the entries on the table |
| * if there are any. In case of direct map, the entries will be left over, which |
| * is fine for PEs with 2 DMA windows where the second window is created with create-pe |
| * at which point the table is cleared. However, on VFs having only one DMA window, the |
| * default window would end up seeing the entries left over from the direct map done |
| * on the second window. So, remove the ddw explicitly so that clean_dma_window() |
| * cleans up the entries if any. |
| */ |
| if (remove_dynamic_dma_windows(pdev, pdn)) { |
| dev_warn(&pdev->dev, "The existing DDW removal failed for node %pOF\n", pdn); |
| mutex_unlock(&dma_win_init_mutex); |
| return -1; |
| } |
| |
| /* The table_group->tables[0] is not null now, it must be the default window |
| * Remove it, let the userspace create it as it needs. |
| */ |
| if (table_group->tables[0]) { |
| remove_dma_window_named(pdn, true, "ibm,dma-window", true); |
| iommu_tce_table_put(tbl); |
| table_group->tables[0] = NULL; |
| } |
| set_iommu_table_base(dev, NULL); |
| |
| mutex_unlock(&dma_win_init_mutex); |
| |
| return 0; |
| } |
| |
| static void spapr_tce_release_ownership(struct iommu_table_group *table_group, struct device *dev) |
| { |
| struct iommu_table *tbl = table_group->tables[0]; |
| |
| if (tbl) { /* Default window already restored */ |
| return; |
| } |
| |
| mutex_lock(&dma_win_init_mutex); |
| |
| /* Restore the default window */ |
| pseries_setup_default_iommu_config(table_group, dev); |
| |
| mutex_unlock(&dma_win_init_mutex); |
| |
| return; |
| } |
| |
| static struct iommu_table_group_ops spapr_tce_table_group_ops = { |
| .get_table_size = spapr_tce_get_table_size, |
| .create_table = spapr_tce_create_table, |
| .set_window = spapr_tce_set_window, |
| .unset_window = spapr_tce_unset_window, |
| .take_ownership = spapr_tce_take_ownership, |
| .release_ownership = spapr_tce_release_ownership, |
| }; |
| #endif |
| |
| static int iommu_mem_notifier(struct notifier_block *nb, unsigned long action, |
| void *data) |
| { |
| struct dma_win *window; |
| struct memory_notify *arg = data; |
| int ret = 0; |
| |
| switch (action) { |
| case MEM_GOING_ONLINE: |
| spin_lock(&dma_win_list_lock); |
| list_for_each_entry(window, &dma_win_list, list) { |
| if (window->direct) { |
| ret |= tce_setrange_multi_pSeriesLP(arg->start_pfn, |
| arg->nr_pages, window->prop); |
| } |
| /* XXX log error */ |
| } |
| spin_unlock(&dma_win_list_lock); |
| break; |
| case MEM_CANCEL_ONLINE: |
| case MEM_OFFLINE: |
| spin_lock(&dma_win_list_lock); |
| list_for_each_entry(window, &dma_win_list, list) { |
| if (window->direct) { |
| ret |= tce_clearrange_multi_pSeriesLP(arg->start_pfn, |
| arg->nr_pages, window->prop); |
| } |
| /* XXX log error */ |
| } |
| spin_unlock(&dma_win_list_lock); |
| break; |
| default: |
| break; |
| } |
| if (ret && action != MEM_CANCEL_ONLINE) |
| return NOTIFY_BAD; |
| |
| return NOTIFY_OK; |
| } |
| |
| static struct notifier_block iommu_mem_nb = { |
| .notifier_call = iommu_mem_notifier, |
| }; |
| |
| static int iommu_reconfig_notifier(struct notifier_block *nb, unsigned long action, void *data) |
| { |
| int err = NOTIFY_OK; |
| struct of_reconfig_data *rd = data; |
| struct device_node *np = rd->dn; |
| struct pci_dn *pci = PCI_DN(np); |
| struct dma_win *window; |
| |
| switch (action) { |
| case OF_RECONFIG_DETACH_NODE: |
| /* |
| * Removing the property will invoke the reconfig |
| * notifier again, which causes dead-lock on the |
| * read-write semaphore of the notifier chain. So |
| * we have to remove the property when releasing |
| * the device node. |
| */ |
| if (remove_dma_window_named(np, false, DIRECT64_PROPNAME, true)) |
| remove_dma_window_named(np, false, DMA64_PROPNAME, true); |
| |
| if (pci && pci->table_group) |
| iommu_pseries_free_group(pci->table_group, |
| np->full_name); |
| |
| spin_lock(&dma_win_list_lock); |
| list_for_each_entry(window, &dma_win_list, list) { |
| if (window->device == np) { |
| list_del(&window->list); |
| kfree(window); |
| break; |
| } |
| } |
| spin_unlock(&dma_win_list_lock); |
| break; |
| default: |
| err = NOTIFY_DONE; |
| break; |
| } |
| return err; |
| } |
| |
| static struct notifier_block iommu_reconfig_nb = { |
| .notifier_call = iommu_reconfig_notifier, |
| }; |
| |
| /* These are called very early. */ |
| void __init iommu_init_early_pSeries(void) |
| { |
| if (of_chosen && of_get_property(of_chosen, "linux,iommu-off", NULL)) |
| return; |
| |
| if (firmware_has_feature(FW_FEATURE_LPAR)) { |
| pseries_pci_controller_ops.dma_bus_setup = pci_dma_bus_setup_pSeriesLP; |
| pseries_pci_controller_ops.dma_dev_setup = pci_dma_dev_setup_pSeriesLP; |
| if (!disable_ddw) |
| pseries_pci_controller_ops.iommu_bypass_supported = |
| iommu_bypass_supported_pSeriesLP; |
| } else { |
| pseries_pci_controller_ops.dma_bus_setup = pci_dma_bus_setup_pSeries; |
| pseries_pci_controller_ops.dma_dev_setup = pci_dma_dev_setup_pSeries; |
| } |
| |
| |
| of_reconfig_notifier_register(&iommu_reconfig_nb); |
| register_memory_notifier(&iommu_mem_nb); |
| |
| set_pci_dma_ops(&dma_iommu_ops); |
| } |
| |
| static int __init disable_multitce(char *str) |
| { |
| if (strcmp(str, "off") == 0 && |
| firmware_has_feature(FW_FEATURE_LPAR) && |
| (firmware_has_feature(FW_FEATURE_PUT_TCE_IND) || |
| firmware_has_feature(FW_FEATURE_STUFF_TCE))) { |
| printk(KERN_INFO "Disabling MULTITCE firmware feature\n"); |
| powerpc_firmware_features &= |
| ~(FW_FEATURE_PUT_TCE_IND | FW_FEATURE_STUFF_TCE); |
| } |
| return 1; |
| } |
| |
| __setup("multitce=", disable_multitce); |
| |
| #ifdef CONFIG_SPAPR_TCE_IOMMU |
| struct iommu_group *pSeries_pci_device_group(struct pci_controller *hose, |
| struct pci_dev *pdev) |
| { |
| struct device_node *pdn, *dn = pdev->dev.of_node; |
| struct iommu_group *grp; |
| struct pci_dn *pci; |
| |
| pdn = pci_dma_find(dn, NULL); |
| if (!pdn || !PCI_DN(pdn)) |
| return ERR_PTR(-ENODEV); |
| |
| pci = PCI_DN(pdn); |
| if (!pci->table_group) |
| return ERR_PTR(-ENODEV); |
| |
| grp = pci->table_group->group; |
| if (!grp) |
| return ERR_PTR(-ENODEV); |
| |
| return iommu_group_ref_get(grp); |
| } |
| #endif |