| /* SPDX-License-Identifier: GPL-2.0-or-later */ |
| /****************************************************************************** |
| * |
| * (C)Copyright 1998,1999 SysKonnect, |
| * a business unit of Schneider & Koch & Co. Datensysteme GmbH. |
| * |
| * The information in this file is provided "AS IS" without warranty. |
| * |
| ******************************************************************************/ |
| |
| #ifndef _HWM_ |
| #define _HWM_ |
| |
| #include "mbuf.h" |
| |
| /* |
| * MACRO for DMA synchronization: |
| * The descriptor 'desc' is flushed for the device 'flag'. |
| * Devices are the CPU (DDI_DMA_SYNC_FORCPU) and the |
| * adapter (DDI_DMA_SYNC_FORDEV). |
| * |
| * 'desc' Pointer to a Rx or Tx descriptor. |
| * 'flag' Flag for direction (view for CPU or DEVICE) that |
| * should be synchronized. |
| * |
| * Empty macros and defines are specified here. The real macro |
| * is os-specific and should be defined in osdef1st.h. |
| */ |
| #ifndef DRV_BUF_FLUSH |
| #define DRV_BUF_FLUSH(desc,flag) |
| #define DDI_DMA_SYNC_FORCPU |
| #define DDI_DMA_SYNC_FORDEV |
| #endif |
| |
| /* |
| * hardware modul dependent receive modes |
| */ |
| #define RX_ENABLE_PASS_SMT 21 |
| #define RX_DISABLE_PASS_SMT 22 |
| #define RX_ENABLE_PASS_NSA 23 |
| #define RX_DISABLE_PASS_NSA 24 |
| #define RX_ENABLE_PASS_DB 25 |
| #define RX_DISABLE_PASS_DB 26 |
| #define RX_DISABLE_PASS_ALL 27 |
| #define RX_DISABLE_LLC_PROMISC 28 |
| #define RX_ENABLE_LLC_PROMISC 29 |
| |
| |
| #ifndef DMA_RD |
| #define DMA_RD 1 /* memory -> hw */ |
| #endif |
| #ifndef DMA_WR |
| #define DMA_WR 2 /* hw -> memory */ |
| #endif |
| #define SMT_BUF 0x80 |
| |
| /* |
| * bits of the frame status byte |
| */ |
| #define EN_IRQ_EOF 0x02 /* get IRQ after end of frame transmission */ |
| #define LOC_TX 0x04 /* send frame to the local SMT */ |
| #define LAST_FRAG 0x08 /* last TxD of the frame */ |
| #define FIRST_FRAG 0x10 /* first TxD of the frame */ |
| #define LAN_TX 0x20 /* send frame to network if set */ |
| #define RING_DOWN 0x40 /* error: unable to send, ring down */ |
| #define OUT_OF_TXD 0x80 /* error: not enough TxDs available */ |
| |
| |
| #ifndef NULL |
| #define NULL 0 |
| #endif |
| |
| #define C_INDIC (1L<<25) |
| #define A_INDIC (1L<<26) |
| #define RD_FS_LOCAL 0x80 |
| |
| /* |
| * DEBUG FLAGS |
| */ |
| #define DEBUG_SMTF 1 |
| #define DEBUG_SMT 2 |
| #define DEBUG_ECM 3 |
| #define DEBUG_RMT 4 |
| #define DEBUG_CFM 5 |
| #define DEBUG_PCM 6 |
| #define DEBUG_SBA 7 |
| #define DEBUG_ESS 8 |
| |
| #define DB_HWM_RX 10 |
| #define DB_HWM_TX 11 |
| #define DB_HWM_GEN 12 |
| |
| struct s_mbuf_pool { |
| #ifndef MB_OUTSIDE_SMC |
| SMbuf mb[MAX_MBUF] ; /* mbuf pool */ |
| #endif |
| SMbuf *mb_start ; /* points to the first mb */ |
| SMbuf *mb_free ; /* free queue */ |
| } ; |
| |
| struct hwm_r { |
| /* |
| * hardware modul specific receive variables |
| */ |
| u_int len ; /* length of the whole frame */ |
| char *mb_pos ; /* SMbuf receive position */ |
| } ; |
| |
| struct hw_modul { |
| /* |
| * All hardware modul specific variables |
| */ |
| struct s_mbuf_pool mbuf_pool ; |
| struct hwm_r r ; |
| |
| union s_fp_descr volatile *descr_p ; /* points to the desriptor area */ |
| |
| u_short pass_SMT ; /* pass SMT frames */ |
| u_short pass_NSA ; /* pass all NSA frames */ |
| u_short pass_DB ; /* pass Direct Beacon Frames */ |
| u_short pass_llc_promisc ; /* pass all llc frames (default ON) */ |
| |
| SMbuf *llc_rx_pipe ; /* points to the first queued llc fr */ |
| SMbuf *llc_rx_tail ; /* points to the last queued llc fr */ |
| int queued_rx_frames ; /* number of queued frames */ |
| |
| SMbuf *txd_tx_pipe ; /* points to first mb in the txd ring */ |
| SMbuf *txd_tx_tail ; /* points to last mb in the txd ring */ |
| int queued_txd_mb ; /* number of SMT MBufs in txd ring */ |
| |
| int rx_break ; /* rev. was breaked because ind. off */ |
| int leave_isr ; /* leave fddi_isr immedeately if set */ |
| int isr_flag ; /* set, when HWM is entered from isr */ |
| /* |
| * variables for the current transmit frame |
| */ |
| struct s_smt_tx_queue *tx_p ; /* pointer to the transmit queue */ |
| u_long tx_descr ; /* tx descriptor for FORMAC+ */ |
| int tx_len ; /* tx frame length */ |
| SMbuf *tx_mb ; /* SMT tx MBuf pointer */ |
| char *tx_data ; /* data pointer to the SMT tx Mbuf */ |
| |
| int detec_count ; /* counter for out of RxD condition */ |
| u_long rx_len_error ; /* rx len FORMAC != sum of fragments */ |
| } ; |
| |
| |
| /* |
| * DEBUG structs and macros |
| */ |
| |
| #ifdef DEBUG |
| struct os_debug { |
| int hwm_rx ; |
| int hwm_tx ; |
| int hwm_gen ; |
| } ; |
| #endif |
| |
| #ifdef DEBUG |
| #ifdef DEBUG_BRD |
| #define DB_P smc->debug |
| #else |
| #define DB_P debug |
| #endif |
| |
| #define DB_RX(lev, fmt, ...) \ |
| do { \ |
| if (DB_P.d_os.hwm_rx >= (lev)) \ |
| printf(fmt "\n", ##__VA_ARGS__); \ |
| } while (0) |
| #define DB_TX(lev, fmt, ...) \ |
| do { \ |
| if (DB_P.d_os.hwm_tx >= (lev)) \ |
| printf(fmt "\n", ##__VA_ARGS__); \ |
| } while (0) |
| #define DB_GEN(lev, fmt, ...) \ |
| do { \ |
| if (DB_P.d_os.hwm_gen >= (lev)) \ |
| printf(fmt "\n", ##__VA_ARGS__); \ |
| } while (0) |
| #else /* DEBUG */ |
| #define DB_RX(lev, fmt, ...) no_printk(fmt "\n", ##__VA_ARGS__) |
| #define DB_TX(lev, fmt, ...) no_printk(fmt "\n", ##__VA_ARGS__) |
| #define DB_GEN(lev, fmt, ...) no_printk(fmt "\n", ##__VA_ARGS__) |
| #endif /* DEBUG */ |
| |
| #ifndef SK_BREAK |
| #define SK_BREAK() |
| #endif |
| |
| |
| /* |
| * HWM Macros |
| */ |
| |
| /* |
| * BEGIN_MANUAL_ENTRY(HWM_GET_TX_PHYS) |
| * u_long HWM_GET_TX_PHYS(txd) |
| * |
| * function MACRO (hardware module, hwmtm.h) |
| * This macro may be invoked by the OS-specific module to read |
| * the physical address of the specified TxD. |
| * |
| * para txd pointer to the TxD |
| * |
| * END_MANUAL_ENTRY |
| */ |
| #define HWM_GET_TX_PHYS(txd) (u_long)AIX_REVERSE((txd)->txd_tbadr) |
| |
| /* |
| * BEGIN_MANUAL_ENTRY(HWM_GET_TX_LEN) |
| * int HWM_GET_TX_LEN(txd) |
| * |
| * function MACRO (hardware module, hwmtm.h) |
| * This macro may be invoked by the OS-specific module to read |
| * the fragment length of the specified TxD |
| * |
| * para rxd pointer to the TxD |
| * |
| * return the length of the fragment in bytes |
| * |
| * END_MANUAL_ENTRY |
| */ |
| #define HWM_GET_TX_LEN(txd) ((int)AIX_REVERSE((txd)->txd_tbctrl)& RD_LENGTH) |
| |
| /* |
| * BEGIN_MANUAL_ENTRY(HWM_GET_TX_USED) |
| * txd *HWM_GET_TX_USED(smc,queue) |
| * |
| * function MACRO (hardware module, hwmtm.h) |
| * This macro may be invoked by the OS-specific module to get the |
| * number of used TxDs for the queue, specified by the index. |
| * |
| * para queue the number of the send queue: Can be specified by |
| * QUEUE_A0, QUEUE_S or (frame_status & QUEUE_A0) |
| * |
| * return number of used TxDs for this send queue |
| * |
| * END_MANUAL_ENTRY |
| */ |
| #define HWM_GET_TX_USED(smc,queue) (int) (smc)->hw.fp.tx_q[queue].tx_used |
| |
| /* |
| * BEGIN_MANUAL_ENTRY(HWM_GET_CURR_TXD) |
| * txd *HWM_GET_CURR_TXD(smc,queue) |
| * |
| * function MACRO (hardware module, hwmtm.h) |
| * This macro may be invoked by the OS-specific module to get the |
| * pointer to the TxD which points to the current queue put |
| * position. |
| * |
| * para queue the number of the send queue: Can be specified by |
| * QUEUE_A0, QUEUE_S or (frame_status & QUEUE_A0) |
| * |
| * return pointer to the current TxD |
| * |
| * END_MANUAL_ENTRY |
| */ |
| #define HWM_GET_CURR_TXD(smc,queue) (struct s_smt_fp_txd volatile *)\ |
| (smc)->hw.fp.tx_q[queue].tx_curr_put |
| |
| /* |
| * BEGIN_MANUAL_ENTRY(HWM_GET_RX_FRAG_LEN) |
| * int HWM_GET_RX_FRAG_LEN(rxd) |
| * |
| * function MACRO (hardware module, hwmtm.h) |
| * This macro may be invoked by the OS-specific module to read |
| * the fragment length of the specified RxD |
| * |
| * para rxd pointer to the RxD |
| * |
| * return the length of the fragment in bytes |
| * |
| * END_MANUAL_ENTRY |
| */ |
| #define HWM_GET_RX_FRAG_LEN(rxd) ((int)AIX_REVERSE((rxd)->rxd_rbctrl)& \ |
| RD_LENGTH) |
| |
| /* |
| * BEGIN_MANUAL_ENTRY(HWM_GET_RX_PHYS) |
| * u_long HWM_GET_RX_PHYS(rxd) |
| * |
| * function MACRO (hardware module, hwmtm.h) |
| * This macro may be invoked by the OS-specific module to read |
| * the physical address of the specified RxD. |
| * |
| * para rxd pointer to the RxD |
| * |
| * return the RxD's physical pointer to the data fragment |
| * |
| * END_MANUAL_ENTRY |
| */ |
| #define HWM_GET_RX_PHYS(rxd) (u_long)AIX_REVERSE((rxd)->rxd_rbadr) |
| |
| /* |
| * BEGIN_MANUAL_ENTRY(HWM_GET_RX_USED) |
| * int HWM_GET_RX_USED(smc) |
| * |
| * function MACRO (hardware module, hwmtm.h) |
| * This macro may be invoked by the OS-specific module to get |
| * the count of used RXDs in receive queue 1. |
| * |
| * return the used RXD count of receive queue 1 |
| * |
| * NOTE: Remember, because of an ASIC bug at least one RXD should be unused |
| * in the descriptor ring ! |
| * |
| * END_MANUAL_ENTRY |
| */ |
| #define HWM_GET_RX_USED(smc) ((int)(smc)->hw.fp.rx_q[QUEUE_R1].rx_used) |
| |
| /* |
| * BEGIN_MANUAL_ENTRY(HWM_GET_RX_FREE) |
| * int HWM_GET_RX_FREE(smc) |
| * |
| * function MACRO (hardware module, hwmtm.h) |
| * This macro may be invoked by the OS-specific module to get |
| * the rxd_free count of receive queue 1. |
| * |
| * return the rxd_free count of receive queue 1 |
| * |
| * END_MANUAL_ENTRY |
| */ |
| #define HWM_GET_RX_FREE(smc) ((int)(smc)->hw.fp.rx_q[QUEUE_R1].rx_free-1) |
| |
| /* |
| * BEGIN_MANUAL_ENTRY(HWM_GET_CURR_RXD) |
| * rxd *HWM_GET_CURR_RXD(smc) |
| * |
| * function MACRO (hardware module, hwmtm.h) |
| * This macro may be invoked by the OS-specific module to get the |
| * pointer to the RxD which points to the current queue put |
| * position. |
| * |
| * return pointer to the current RxD |
| * |
| * END_MANUAL_ENTRY |
| */ |
| #define HWM_GET_CURR_RXD(smc) (struct s_smt_fp_rxd volatile *)\ |
| (smc)->hw.fp.rx_q[QUEUE_R1].rx_curr_put |
| |
| /* |
| * BEGIN_MANUAL_ENTRY(HWM_RX_CHECK) |
| * void HWM_RX_CHECK(smc,low_water) |
| * |
| * function MACRO (hardware module, hwmtm.h) |
| * This macro is invoked by the OS-specific before it left the |
| * function mac_drv_rx_complete. This macro calls mac_drv_fill_rxd |
| * if the number of used RxDs is equal or lower than the |
| * given low water mark. |
| * |
| * para low_water low water mark of used RxD's |
| * |
| * END_MANUAL_ENTRY |
| */ |
| #ifndef HWM_NO_FLOW_CTL |
| #define HWM_RX_CHECK(smc,low_water) {\ |
| if ((low_water) >= (smc)->hw.fp.rx_q[QUEUE_R1].rx_used) {\ |
| mac_drv_fill_rxd(smc) ;\ |
| }\ |
| } |
| #else |
| #define HWM_RX_CHECK(smc,low_water) mac_drv_fill_rxd(smc) |
| #endif |
| |
| #ifndef HWM_EBASE |
| #define HWM_EBASE 500 |
| #endif |
| |
| #define HWM_E0001 HWM_EBASE + 1 |
| #define HWM_E0001_MSG "HWM: Wrong size of s_rxd_os struct" |
| #define HWM_E0002 HWM_EBASE + 2 |
| #define HWM_E0002_MSG "HWM: Wrong size of s_txd_os struct" |
| #define HWM_E0003 HWM_EBASE + 3 |
| #define HWM_E0003_MSG "HWM: smt_free_mbuf() called with NULL pointer" |
| #define HWM_E0004 HWM_EBASE + 4 |
| #define HWM_E0004_MSG "HWM: Parity error rx queue 1" |
| #define HWM_E0005 HWM_EBASE + 5 |
| #define HWM_E0005_MSG "HWM: Encoding error rx queue 1" |
| #define HWM_E0006 HWM_EBASE + 6 |
| #define HWM_E0006_MSG "HWM: Encoding error async tx queue" |
| #define HWM_E0007 HWM_EBASE + 7 |
| #define HWM_E0007_MSG "HWM: Encoding error sync tx queue" |
| #define HWM_E0008 HWM_EBASE + 8 |
| #define HWM_E0008_MSG "" |
| #define HWM_E0009 HWM_EBASE + 9 |
| #define HWM_E0009_MSG "HWM: Out of RxD condition detected" |
| #define HWM_E0010 HWM_EBASE + 10 |
| #define HWM_E0010_MSG "HWM: A protocol layer has tried to send a frame with an invalid frame control" |
| #define HWM_E0011 HWM_EBASE + 11 |
| #define HWM_E0011_MSG "HWM: mac_drv_clear_tx_queue was called although the hardware wasn't stopped" |
| #define HWM_E0012 HWM_EBASE + 12 |
| #define HWM_E0012_MSG "HWM: mac_drv_clear_rx_queue was called although the hardware wasn't stopped" |
| #define HWM_E0013 HWM_EBASE + 13 |
| #define HWM_E0013_MSG "HWM: mac_drv_repair_descr was called although the hardware wasn't stopped" |
| |
| #endif |
