/*
 *  PowerPC version 
 *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
 *  Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP
 *    Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu>
 *  Adapted for Power Macintosh by Paul Mackerras.
 *  Low-level exception handlers and MMU support
 *  rewritten by Paul Mackerras.
 *    Copyright (C) 1996 Paul Mackerras.
 *  MPC8xx modifications Copyright (C) 1997 Dan Malek (dmalek@jlc.net).
 *
 *  This file contains the system call entry code, context switch
 *  code, and exception/interrupt return code for PowerPC.
 *
 *  This program is free software; you can redistribute it and/or
 *  modify it under the terms of the GNU General Public License
 *  as published by the Free Software Foundation; either version
 *  2 of the License, or (at your option) any later version.
 */

#include <linux/errno.h>
#include <linux/err.h>
#include <linux/magic.h>
#include <asm/unistd.h>
#include <asm/processor.h>
#include <asm/page.h>
#include <asm/mmu.h>
#include <asm/thread_info.h>
#include <asm/ppc_asm.h>
#include <asm/asm-offsets.h>
#include <asm/cputable.h>
#include <asm/firmware.h>
#include <asm/bug.h>
#include <asm/ptrace.h>
#include <asm/irqflags.h>
#include <asm/ftrace.h>
#include <asm/hw_irq.h>
#include <asm/context_tracking.h>
#include <asm/tm.h>

/*
 * System calls.
 */
	.section	".toc","aw"
SYS_CALL_TABLE:
	.tc sys_call_table[TC],sys_call_table

/* This value is used to mark exception frames on the stack. */
exception_marker:
	.tc	ID_EXC_MARKER[TC],STACK_FRAME_REGS_MARKER

	.section	".text"
	.align 7

	.globl system_call_common
system_call_common:
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
BEGIN_FTR_SECTION
	extrdi.	r10, r12, 1, (63-MSR_TS_T_LG) /* transaction active? */
	bne	tabort_syscall
END_FTR_SECTION_IFSET(CPU_FTR_TM)
#endif
	andi.	r10,r12,MSR_PR
	mr	r10,r1
	addi	r1,r1,-INT_FRAME_SIZE
	beq-	1f
	ld	r1,PACAKSAVE(r13)
1:	std	r10,0(r1)
	std	r11,_NIP(r1)
	std	r12,_MSR(r1)
	std	r0,GPR0(r1)
	std	r10,GPR1(r1)
	beq	2f			/* if from kernel mode */
	ACCOUNT_CPU_USER_ENTRY(r10, r11)
2:	std	r2,GPR2(r1)
	std	r3,GPR3(r1)
	mfcr	r2
	std	r4,GPR4(r1)
	std	r5,GPR5(r1)
	std	r6,GPR6(r1)
	std	r7,GPR7(r1)
	std	r8,GPR8(r1)
	li	r11,0
	std	r11,GPR9(r1)
	std	r11,GPR10(r1)
	std	r11,GPR11(r1)
	std	r11,GPR12(r1)
	std	r11,_XER(r1)
	std	r11,_CTR(r1)
	std	r9,GPR13(r1)
	mflr	r10
	/*
	 * This clears CR0.SO (bit 28), which is the error indication on
	 * return from this system call.
	 */
	rldimi	r2,r11,28,(63-28)
	li	r11,0xc01
	std	r10,_LINK(r1)
	std	r11,_TRAP(r1)
	std	r3,ORIG_GPR3(r1)
	std	r2,_CCR(r1)
	ld	r2,PACATOC(r13)
	addi	r9,r1,STACK_FRAME_OVERHEAD
	ld	r11,exception_marker@toc(r2)
	std	r11,-16(r9)		/* "regshere" marker */
#if defined(CONFIG_VIRT_CPU_ACCOUNTING_NATIVE) && defined(CONFIG_PPC_SPLPAR)
BEGIN_FW_FTR_SECTION
	beq	33f
	/* if from user, see if there are any DTL entries to process */
	ld	r10,PACALPPACAPTR(r13)	/* get ptr to VPA */
	ld	r11,PACA_DTL_RIDX(r13)	/* get log read index */
	addi	r10,r10,LPPACA_DTLIDX
	LDX_BE	r10,0,r10		/* get log write index */
	cmpd	cr1,r11,r10
	beq+	cr1,33f
	bl	accumulate_stolen_time
	REST_GPR(0,r1)
	REST_4GPRS(3,r1)
	REST_2GPRS(7,r1)
	addi	r9,r1,STACK_FRAME_OVERHEAD
33:
END_FW_FTR_SECTION_IFSET(FW_FEATURE_SPLPAR)
#endif /* CONFIG_VIRT_CPU_ACCOUNTING_NATIVE && CONFIG_PPC_SPLPAR */

	/*
	 * A syscall should always be called with interrupts enabled
	 * so we just unconditionally hard-enable here. When some kind
	 * of irq tracing is used, we additionally check that condition
	 * is correct
	 */
#if defined(CONFIG_TRACE_IRQFLAGS) && defined(CONFIG_BUG)
	lbz	r10,PACASOFTIRQEN(r13)
	xori	r10,r10,1
1:	tdnei	r10,0
	EMIT_BUG_ENTRY 1b,__FILE__,__LINE__,BUGFLAG_WARNING
#endif

#ifdef CONFIG_PPC_BOOK3E
	wrteei	1
#else
	ld	r11,PACAKMSR(r13)
	ori	r11,r11,MSR_EE
	mtmsrd	r11,1
#endif /* CONFIG_PPC_BOOK3E */

	/* We do need to set SOFTE in the stack frame or the return
	 * from interrupt will be painful
	 */
	li	r10,1
	std	r10,SOFTE(r1)

	CURRENT_THREAD_INFO(r11, r1)
	ld	r10,TI_FLAGS(r11)
	andi.	r11,r10,_TIF_SYSCALL_DOTRACE
	bne	syscall_dotrace		/* does not return */
	cmpldi	0,r0,NR_syscalls
	bge-	syscall_enosys

system_call:			/* label this so stack traces look sane */
/*
 * Need to vector to 32 Bit or default sys_call_table here,
 * based on caller's run-mode / personality.
 */
	ld	r11,SYS_CALL_TABLE@toc(2)
	andi.	r10,r10,_TIF_32BIT
	beq	15f
	addi	r11,r11,8	/* use 32-bit syscall entries */
	clrldi	r3,r3,32
	clrldi	r4,r4,32
	clrldi	r5,r5,32
	clrldi	r6,r6,32
	clrldi	r7,r7,32
	clrldi	r8,r8,32
15:
	slwi	r0,r0,4
	ldx	r12,r11,r0	/* Fetch system call handler [ptr] */
	mtctr   r12
	bctrl			/* Call handler */

.Lsyscall_exit:
	std	r3,RESULT(r1)
	CURRENT_THREAD_INFO(r12, r1)

	ld	r8,_MSR(r1)
#ifdef CONFIG_PPC_BOOK3S
	/* No MSR:RI on BookE */
	andi.	r10,r8,MSR_RI
	beq-	unrecov_restore
#endif
	/*
	 * Disable interrupts so current_thread_info()->flags can't change,
	 * and so that we don't get interrupted after loading SRR0/1.
	 */
#ifdef CONFIG_PPC_BOOK3E
	wrteei	0
#else
	ld	r10,PACAKMSR(r13)
	/*
	 * For performance reasons we clear RI the same time that we
	 * clear EE. We only need to clear RI just before we restore r13
	 * below, but batching it with EE saves us one expensive mtmsrd call.
	 * We have to be careful to restore RI if we branch anywhere from
	 * here (eg syscall_exit_work).
	 */
	li	r9,MSR_RI
	andc	r11,r10,r9
	mtmsrd	r11,1
#endif /* CONFIG_PPC_BOOK3E */

	ld	r9,TI_FLAGS(r12)
	li	r11,-MAX_ERRNO
	andi.	r0,r9,(_TIF_SYSCALL_DOTRACE|_TIF_SINGLESTEP|_TIF_USER_WORK_MASK|_TIF_PERSYSCALL_MASK)
	bne-	syscall_exit_work

	andi.	r0,r8,MSR_FP
	beq 2f
#ifdef CONFIG_ALTIVEC
	andis.	r0,r8,MSR_VEC@h
	bne	3f
#endif
2:	addi    r3,r1,STACK_FRAME_OVERHEAD
#ifdef CONFIG_PPC_BOOK3S
	mtmsrd	r10,1		/* Restore RI */
#endif
	bl	restore_math
#ifdef CONFIG_PPC_BOOK3S
	ld	r10,PACAKMSR(r13)
	li	r9,MSR_RI
	andc	r11,r10,r9 /* Re-clear RI */
	mtmsrd	r11,1
#endif
	ld	r8,_MSR(r1)
	ld	r3,RESULT(r1)
	li	r11,-MAX_ERRNO

3:	cmpld	r3,r11
	ld	r5,_CCR(r1)
	bge-	syscall_error
.Lsyscall_error_cont:
	ld	r7,_NIP(r1)
BEGIN_FTR_SECTION
	stdcx.	r0,0,r1			/* to clear the reservation */
END_FTR_SECTION_IFCLR(CPU_FTR_STCX_CHECKS_ADDRESS)
	andi.	r6,r8,MSR_PR
	ld	r4,_LINK(r1)

	beq-	1f
	ACCOUNT_CPU_USER_EXIT(r11, r12)

BEGIN_FTR_SECTION
	HMT_MEDIUM_LOW
END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)

	ld	r13,GPR13(r1)	/* only restore r13 if returning to usermode */
1:	ld	r2,GPR2(r1)
	ld	r1,GPR1(r1)
	mtlr	r4
	mtcr	r5
	mtspr	SPRN_SRR0,r7
	mtspr	SPRN_SRR1,r8
	RFI
	b	.	/* prevent speculative execution */

syscall_error:	
	oris	r5,r5,0x1000	/* Set SO bit in CR */
	neg	r3,r3
	std	r5,_CCR(r1)
	b	.Lsyscall_error_cont
	
/* Traced system call support */
syscall_dotrace:
	bl	save_nvgprs
	addi	r3,r1,STACK_FRAME_OVERHEAD
	bl	do_syscall_trace_enter

	/*
	 * We use the return value of do_syscall_trace_enter() as the syscall
	 * number. If the syscall was rejected for any reason do_syscall_trace_enter()
	 * returns an invalid syscall number and the test below against
	 * NR_syscalls will fail.
	 */
	mr	r0,r3

	/* Restore argument registers just clobbered and/or possibly changed. */
	ld	r3,GPR3(r1)
	ld	r4,GPR4(r1)
	ld	r5,GPR5(r1)
	ld	r6,GPR6(r1)
	ld	r7,GPR7(r1)
	ld	r8,GPR8(r1)

	/* Repopulate r9 and r10 for the system_call path */
	addi	r9,r1,STACK_FRAME_OVERHEAD
	CURRENT_THREAD_INFO(r10, r1)
	ld	r10,TI_FLAGS(r10)

	cmpldi	r0,NR_syscalls
	blt+	system_call

	/* Return code is already in r3 thanks to do_syscall_trace_enter() */
	b	.Lsyscall_exit


syscall_enosys:
	li	r3,-ENOSYS
	b	.Lsyscall_exit
	
syscall_exit_work:
#ifdef CONFIG_PPC_BOOK3S
	mtmsrd	r10,1		/* Restore RI */
#endif
	/* If TIF_RESTOREALL is set, don't scribble on either r3 or ccr.
	 If TIF_NOERROR is set, just save r3 as it is. */

	andi.	r0,r9,_TIF_RESTOREALL
	beq+	0f
	REST_NVGPRS(r1)
	b	2f
0:	cmpld	r3,r11		/* r11 is -MAX_ERRNO */
	blt+	1f
	andi.	r0,r9,_TIF_NOERROR
	bne-	1f
	ld	r5,_CCR(r1)
	neg	r3,r3
	oris	r5,r5,0x1000	/* Set SO bit in CR */
	std	r5,_CCR(r1)
1:	std	r3,GPR3(r1)
2:	andi.	r0,r9,(_TIF_PERSYSCALL_MASK)
	beq	4f

	/* Clear per-syscall TIF flags if any are set.  */

	li	r11,_TIF_PERSYSCALL_MASK
	addi	r12,r12,TI_FLAGS
3:	ldarx	r10,0,r12
	andc	r10,r10,r11
	stdcx.	r10,0,r12
	bne-	3b
	subi	r12,r12,TI_FLAGS

4:	/* Anything else left to do? */
BEGIN_FTR_SECTION
	lis	r3,INIT_PPR@highest	/* Set thread.ppr = 3 */
	ld	r10,PACACURRENT(r13)
	sldi	r3,r3,32	/* bits 11-13 are used for ppr */
	std	r3,TASKTHREADPPR(r10)
END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)

	andi.	r0,r9,(_TIF_SYSCALL_DOTRACE|_TIF_SINGLESTEP)
	beq	ret_from_except_lite

	/* Re-enable interrupts */
#ifdef CONFIG_PPC_BOOK3E
	wrteei	1
#else
	ld	r10,PACAKMSR(r13)
	ori	r10,r10,MSR_EE
	mtmsrd	r10,1
#endif /* CONFIG_PPC_BOOK3E */

	bl	save_nvgprs
	addi	r3,r1,STACK_FRAME_OVERHEAD
	bl	do_syscall_trace_leave
	b	ret_from_except

#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
tabort_syscall:
	/* Firstly we need to enable TM in the kernel */
	mfmsr	r10
	li	r13, 1
	rldimi	r10, r13, MSR_TM_LG, 63-MSR_TM_LG
	mtmsrd	r10, 0

	/* tabort, this dooms the transaction, nothing else */
	li	r13, (TM_CAUSE_SYSCALL|TM_CAUSE_PERSISTENT)
	TABORT(R13)

	/*
	 * Return directly to userspace. We have corrupted user register state,
	 * but userspace will never see that register state. Execution will
	 * resume after the tbegin of the aborted transaction with the
	 * checkpointed register state.
	 */
	li	r13, MSR_RI
	andc	r10, r10, r13
	mtmsrd	r10, 1
	mtspr	SPRN_SRR0, r11
	mtspr	SPRN_SRR1, r12

	rfid
	b	.	/* prevent speculative execution */
#endif

/* Save non-volatile GPRs, if not already saved. */
_GLOBAL(save_nvgprs)
	ld	r11,_TRAP(r1)
	andi.	r0,r11,1
	beqlr-
	SAVE_NVGPRS(r1)
	clrrdi	r0,r11,1
	std	r0,_TRAP(r1)
	blr

	
/*
 * The sigsuspend and rt_sigsuspend system calls can call do_signal
 * and thus put the process into the stopped state where we might
 * want to examine its user state with ptrace.  Therefore we need
 * to save all the nonvolatile registers (r14 - r31) before calling
 * the C code.  Similarly, fork, vfork and clone need the full
 * register state on the stack so that it can be copied to the child.
 */

_GLOBAL(ppc_fork)
	bl	save_nvgprs
	bl	sys_fork
	b	.Lsyscall_exit

_GLOBAL(ppc_vfork)
	bl	save_nvgprs
	bl	sys_vfork
	b	.Lsyscall_exit

_GLOBAL(ppc_clone)
	bl	save_nvgprs
	bl	sys_clone
	b	.Lsyscall_exit

_GLOBAL(ppc32_swapcontext)
	bl	save_nvgprs
	bl	compat_sys_swapcontext
	b	.Lsyscall_exit

_GLOBAL(ppc64_swapcontext)
	bl	save_nvgprs
	bl	sys_swapcontext
	b	.Lsyscall_exit

_GLOBAL(ppc_switch_endian)
	bl	save_nvgprs
	bl	sys_switch_endian
	b	.Lsyscall_exit

_GLOBAL(ret_from_fork)
	bl	schedule_tail
	REST_NVGPRS(r1)
	li	r3,0
	b	.Lsyscall_exit

_GLOBAL(ret_from_kernel_thread)
	bl	schedule_tail
	REST_NVGPRS(r1)
	mtlr	r14
	mr	r3,r15
#if defined(_CALL_ELF) && _CALL_ELF == 2
	mr	r12,r14
#endif
	blrl
	li	r3,0
	b	.Lsyscall_exit

/*
 * This routine switches between two different tasks.  The process
 * state of one is saved on its kernel stack.  Then the state
 * of the other is restored from its kernel stack.  The memory
 * management hardware is updated to the second process's state.
 * Finally, we can return to the second process, via ret_from_except.
 * On entry, r3 points to the THREAD for the current task, r4
 * points to the THREAD for the new task.
 *
 * Note: there are two ways to get to the "going out" portion
 * of this code; either by coming in via the entry (_switch)
 * or via "fork" which must set up an environment equivalent
 * to the "_switch" path.  If you change this you'll have to change
 * the fork code also.
 *
 * The code which creates the new task context is in 'copy_thread'
 * in arch/powerpc/kernel/process.c 
 */
	.align	7
_GLOBAL(_switch)
	mflr	r0
	std	r0,16(r1)
	stdu	r1,-SWITCH_FRAME_SIZE(r1)
	/* r3-r13 are caller saved -- Cort */
	SAVE_8GPRS(14, r1)
	SAVE_10GPRS(22, r1)
	std	r0,_NIP(r1)	/* Return to switch caller */
	mfcr	r23
	std	r23,_CCR(r1)
	std	r1,KSP(r3)	/* Set old stack pointer */

#ifdef CONFIG_SMP
	/* We need a sync somewhere here to make sure that if the
	 * previous task gets rescheduled on another CPU, it sees all
	 * stores it has performed on this one.
	 */
	sync
#endif /* CONFIG_SMP */

	/*
	 * If we optimise away the clear of the reservation in system
	 * calls because we know the CPU tracks the address of the
	 * reservation, then we need to clear it here to cover the
	 * case that the kernel context switch path has no larx
	 * instructions.
	 */
BEGIN_FTR_SECTION
	ldarx	r6,0,r1
END_FTR_SECTION_IFSET(CPU_FTR_STCX_CHECKS_ADDRESS)

#ifdef CONFIG_PPC_BOOK3S
/* Cancel all explict user streams as they will have no use after context
 * switch and will stop the HW from creating streams itself
 */
	DCBT_STOP_ALL_STREAM_IDS(r6)
#endif

	addi	r6,r4,-THREAD	/* Convert THREAD to 'current' */
	std	r6,PACACURRENT(r13)	/* Set new 'current' */

	ld	r8,KSP(r4)	/* new stack pointer */
#ifdef CONFIG_PPC_BOOK3S
BEGIN_FTR_SECTION
	clrrdi	r6,r8,28	/* get its ESID */
	clrrdi	r9,r1,28	/* get current sp ESID */
FTR_SECTION_ELSE
	clrrdi	r6,r8,40	/* get its 1T ESID */
	clrrdi	r9,r1,40	/* get current sp 1T ESID */
ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_1T_SEGMENT)
	clrldi.	r0,r6,2		/* is new ESID c00000000? */
	cmpd	cr1,r6,r9	/* or is new ESID the same as current ESID? */
	cror	eq,4*cr1+eq,eq
	beq	2f		/* if yes, don't slbie it */

	/* Bolt in the new stack SLB entry */
	ld	r7,KSP_VSID(r4)	/* Get new stack's VSID */
	oris	r0,r6,(SLB_ESID_V)@h
	ori	r0,r0,(SLB_NUM_BOLTED-1)@l
BEGIN_FTR_SECTION
	li	r9,MMU_SEGSIZE_1T	/* insert B field */
	oris	r6,r6,(MMU_SEGSIZE_1T << SLBIE_SSIZE_SHIFT)@h
	rldimi	r7,r9,SLB_VSID_SSIZE_SHIFT,0
END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT)

	/* Update the last bolted SLB.  No write barriers are needed
	 * here, provided we only update the current CPU's SLB shadow
	 * buffer.
	 */
	ld	r9,PACA_SLBSHADOWPTR(r13)
	li	r12,0
	std	r12,SLBSHADOW_STACKESID(r9)	/* Clear ESID */
	li	r12,SLBSHADOW_STACKVSID
	STDX_BE	r7,r12,r9			/* Save VSID */
	li	r12,SLBSHADOW_STACKESID
	STDX_BE	r0,r12,r9			/* Save ESID */

	/* No need to check for MMU_FTR_NO_SLBIE_B here, since when
	 * we have 1TB segments, the only CPUs known to have the errata
	 * only support less than 1TB of system memory and we'll never
	 * actually hit this code path.
	 */

	slbie	r6
	slbie	r6		/* Workaround POWER5 < DD2.1 issue */
	slbmte	r7,r0
	isync
2:
#endif /* !CONFIG_PPC_BOOK3S */

	CURRENT_THREAD_INFO(r7, r8)  /* base of new stack */
	/* Note: this uses SWITCH_FRAME_SIZE rather than INT_FRAME_SIZE
	   because we don't need to leave the 288-byte ABI gap at the
	   top of the kernel stack. */
	addi	r7,r7,THREAD_SIZE-SWITCH_FRAME_SIZE

	mr	r1,r8		/* start using new stack pointer */
	std	r7,PACAKSAVE(r13)

	ld	r6,_CCR(r1)
	mtcrf	0xFF,r6

	/* r3-r13 are destroyed -- Cort */
	REST_8GPRS(14, r1)
	REST_10GPRS(22, r1)

	/* convert old thread to its task_struct for return value */
	addi	r3,r3,-THREAD
	ld	r7,_NIP(r1)	/* Return to _switch caller in new task */
	mtlr	r7
	addi	r1,r1,SWITCH_FRAME_SIZE
	blr

	.align	7
_GLOBAL(ret_from_except)
	ld	r11,_TRAP(r1)
	andi.	r0,r11,1
	bne	ret_from_except_lite
	REST_NVGPRS(r1)

_GLOBAL(ret_from_except_lite)
	/*
	 * Disable interrupts so that current_thread_info()->flags
	 * can't change between when we test it and when we return
	 * from the interrupt.
	 */
#ifdef CONFIG_PPC_BOOK3E
	wrteei	0
#else
	ld	r10,PACAKMSR(r13) /* Get kernel MSR without EE */
	mtmsrd	r10,1		  /* Update machine state */
#endif /* CONFIG_PPC_BOOK3E */

	CURRENT_THREAD_INFO(r9, r1)
	ld	r3,_MSR(r1)
#ifdef CONFIG_PPC_BOOK3E
	ld	r10,PACACURRENT(r13)
#endif /* CONFIG_PPC_BOOK3E */
	ld	r4,TI_FLAGS(r9)
	andi.	r3,r3,MSR_PR
	beq	resume_kernel
#ifdef CONFIG_PPC_BOOK3E
	lwz	r3,(THREAD+THREAD_DBCR0)(r10)
#endif /* CONFIG_PPC_BOOK3E */

	/* Check current_thread_info()->flags */
	andi.	r0,r4,_TIF_USER_WORK_MASK
	bne	1f
#ifdef CONFIG_PPC_BOOK3E
	/*
	 * Check to see if the dbcr0 register is set up to debug.
	 * Use the internal debug mode bit to do this.
	 */
	andis.	r0,r3,DBCR0_IDM@h
	beq	restore
	mfmsr	r0
	rlwinm	r0,r0,0,~MSR_DE	/* Clear MSR.DE */
	mtmsr	r0
	mtspr	SPRN_DBCR0,r3
	li	r10, -1
	mtspr	SPRN_DBSR,r10
	b	restore
#else
	addi	r3,r1,STACK_FRAME_OVERHEAD
	bl	restore_math
	b	restore
#endif
1:	andi.	r0,r4,_TIF_NEED_RESCHED
	beq	2f
	bl	restore_interrupts
	SCHEDULE_USER
	b	ret_from_except_lite
2:
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
	andi.	r0,r4,_TIF_USER_WORK_MASK & ~_TIF_RESTORE_TM
	bne	3f		/* only restore TM if nothing else to do */
	addi	r3,r1,STACK_FRAME_OVERHEAD
	bl	restore_tm_state
	b	restore
3:
#endif
	bl	save_nvgprs
	/*
	 * Use a non volatile GPR to save and restore our thread_info flags
	 * across the call to restore_interrupts.
	 */
	mr	r30,r4
	bl	restore_interrupts
	mr	r4,r30
	addi	r3,r1,STACK_FRAME_OVERHEAD
	bl	do_notify_resume
	b	ret_from_except

resume_kernel:
	/* check current_thread_info, _TIF_EMULATE_STACK_STORE */
	andis.	r8,r4,_TIF_EMULATE_STACK_STORE@h
	beq+	1f

	addi	r8,r1,INT_FRAME_SIZE	/* Get the kprobed function entry */

	lwz	r3,GPR1(r1)
	subi	r3,r3,INT_FRAME_SIZE	/* dst: Allocate a trampoline exception frame */
	mr	r4,r1			/* src:  current exception frame */
	mr	r1,r3			/* Reroute the trampoline frame to r1 */

	/* Copy from the original to the trampoline. */
	li	r5,INT_FRAME_SIZE/8	/* size: INT_FRAME_SIZE */
	li	r6,0			/* start offset: 0 */
	mtctr	r5
2:	ldx	r0,r6,r4
	stdx	r0,r6,r3
	addi	r6,r6,8
	bdnz	2b

	/* Do real store operation to complete stwu */
	lwz	r5,GPR1(r1)
	std	r8,0(r5)

	/* Clear _TIF_EMULATE_STACK_STORE flag */
	lis	r11,_TIF_EMULATE_STACK_STORE@h
	addi	r5,r9,TI_FLAGS
0:	ldarx	r4,0,r5
	andc	r4,r4,r11
	stdcx.	r4,0,r5
	bne-	0b
1:

#ifdef CONFIG_PREEMPT
	/* Check if we need to preempt */
	andi.	r0,r4,_TIF_NEED_RESCHED
	beq+	restore
	/* Check that preempt_count() == 0 and interrupts are enabled */
	lwz	r8,TI_PREEMPT(r9)
	cmpwi	cr1,r8,0
	ld	r0,SOFTE(r1)
	cmpdi	r0,0
	crandc	eq,cr1*4+eq,eq
	bne	restore

	/*
	 * Here we are preempting the current task. We want to make
	 * sure we are soft-disabled first and reconcile irq state.
	 */
	RECONCILE_IRQ_STATE(r3,r4)
1:	bl	preempt_schedule_irq

	/* Re-test flags and eventually loop */
	CURRENT_THREAD_INFO(r9, r1)
	ld	r4,TI_FLAGS(r9)
	andi.	r0,r4,_TIF_NEED_RESCHED
	bne	1b

	/*
	 * arch_local_irq_restore() from preempt_schedule_irq above may
	 * enable hard interrupt but we really should disable interrupts
	 * when we return from the interrupt, and so that we don't get
	 * interrupted after loading SRR0/1.
	 */
#ifdef CONFIG_PPC_BOOK3E
	wrteei	0
#else
	ld	r10,PACAKMSR(r13) /* Get kernel MSR without EE */
	mtmsrd	r10,1		  /* Update machine state */
#endif /* CONFIG_PPC_BOOK3E */
#endif /* CONFIG_PREEMPT */

	.globl	fast_exc_return_irq
fast_exc_return_irq:
restore:
	/*
	 * This is the main kernel exit path. First we check if we
	 * are about to re-enable interrupts
	 */
	ld	r5,SOFTE(r1)
	lbz	r6,PACASOFTIRQEN(r13)
	cmpwi	cr0,r5,0
	beq	restore_irq_off

	/* We are enabling, were we already enabled ? Yes, just return */
	cmpwi	cr0,r6,1
	beq	cr0,do_restore

	/*
	 * We are about to soft-enable interrupts (we are hard disabled
	 * at this point). We check if there's anything that needs to
	 * be replayed first.
	 */
	lbz	r0,PACAIRQHAPPENED(r13)
	cmpwi	cr0,r0,0
	bne-	restore_check_irq_replay

	/*
	 * Get here when nothing happened while soft-disabled, just
	 * soft-enable and move-on. We will hard-enable as a side
	 * effect of rfi
	 */
restore_no_replay:
	TRACE_ENABLE_INTS
	li	r0,1
	stb	r0,PACASOFTIRQEN(r13);

	/*
	 * Final return path. BookE is handled in a different file
	 */
do_restore:
#ifdef CONFIG_PPC_BOOK3E
	b	exception_return_book3e
#else
	/*
	 * Clear the reservation. If we know the CPU tracks the address of
	 * the reservation then we can potentially save some cycles and use
	 * a larx. On POWER6 and POWER7 this is significantly faster.
	 */
BEGIN_FTR_SECTION
	stdcx.	r0,0,r1		/* to clear the reservation */
FTR_SECTION_ELSE
	ldarx	r4,0,r1
ALT_FTR_SECTION_END_IFCLR(CPU_FTR_STCX_CHECKS_ADDRESS)

	/*
	 * Some code path such as load_up_fpu or altivec return directly
	 * here. They run entirely hard disabled and do not alter the
	 * interrupt state. They also don't use lwarx/stwcx. and thus
	 * are known not to leave dangling reservations.
	 */
	.globl	fast_exception_return
fast_exception_return:
	ld	r3,_MSR(r1)
	ld	r4,_CTR(r1)
	ld	r0,_LINK(r1)
	mtctr	r4
	mtlr	r0
	ld	r4,_XER(r1)
	mtspr	SPRN_XER,r4

	REST_8GPRS(5, r1)

	andi.	r0,r3,MSR_RI
	beq-	unrecov_restore

	/* Load PPR from thread struct before we clear MSR:RI */
BEGIN_FTR_SECTION
	ld	r2,PACACURRENT(r13)
	ld	r2,TASKTHREADPPR(r2)
END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)

	/*
	 * Clear RI before restoring r13.  If we are returning to
	 * userspace and we take an exception after restoring r13,
	 * we end up corrupting the userspace r13 value.
	 */
	ld	r4,PACAKMSR(r13) /* Get kernel MSR without EE */
	andc	r4,r4,r0	 /* r0 contains MSR_RI here */
	mtmsrd	r4,1

#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
	/* TM debug */
	std	r3, PACATMSCRATCH(r13) /* Stash returned-to MSR */
#endif
	/*
	 * r13 is our per cpu area, only restore it if we are returning to
	 * userspace the value stored in the stack frame may belong to
	 * another CPU.
	 */
	andi.	r0,r3,MSR_PR
	beq	1f
BEGIN_FTR_SECTION
	mtspr	SPRN_PPR,r2	/* Restore PPR */
END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
	ACCOUNT_CPU_USER_EXIT(r2, r4)
	REST_GPR(13, r1)
1:
	mtspr	SPRN_SRR1,r3

	ld	r2,_CCR(r1)
	mtcrf	0xFF,r2
	ld	r2,_NIP(r1)
	mtspr	SPRN_SRR0,r2

	ld	r0,GPR0(r1)
	ld	r2,GPR2(r1)
	ld	r3,GPR3(r1)
	ld	r4,GPR4(r1)
	ld	r1,GPR1(r1)

	rfid
	b	.	/* prevent speculative execution */

#endif /* CONFIG_PPC_BOOK3E */

	/*
	 * We are returning to a context with interrupts soft disabled.
	 *
	 * However, we may also about to hard enable, so we need to
	 * make sure that in this case, we also clear PACA_IRQ_HARD_DIS
	 * or that bit can get out of sync and bad things will happen
	 */
restore_irq_off:
	ld	r3,_MSR(r1)
	lbz	r7,PACAIRQHAPPENED(r13)
	andi.	r0,r3,MSR_EE
	beq	1f
	rlwinm	r7,r7,0,~PACA_IRQ_HARD_DIS
	stb	r7,PACAIRQHAPPENED(r13)
1:	li	r0,0
	stb	r0,PACASOFTIRQEN(r13);
	TRACE_DISABLE_INTS
	b	do_restore

	/*
	 * Something did happen, check if a re-emit is needed
	 * (this also clears paca->irq_happened)
	 */
restore_check_irq_replay:
	/* XXX: We could implement a fast path here where we check
	 * for irq_happened being just 0x01, in which case we can
	 * clear it and return. That means that we would potentially
	 * miss a decrementer having wrapped all the way around.
	 *
	 * Still, this might be useful for things like hash_page
	 */
	bl	__check_irq_replay
	cmpwi	cr0,r3,0
 	beq	restore_no_replay
 
	/*
	 * We need to re-emit an interrupt. We do so by re-using our
	 * existing exception frame. We first change the trap value,
	 * but we need to ensure we preserve the low nibble of it
	 */
	ld	r4,_TRAP(r1)
	clrldi	r4,r4,60
	or	r4,r4,r3
	std	r4,_TRAP(r1)

	/*
	 * Then find the right handler and call it. Interrupts are
	 * still soft-disabled and we keep them that way.
	*/
	cmpwi	cr0,r3,0x500
	bne	1f
	addi	r3,r1,STACK_FRAME_OVERHEAD;
 	bl	do_IRQ
	b	ret_from_except
1:	cmpwi	cr0,r3,0xe60
	bne	1f
	addi	r3,r1,STACK_FRAME_OVERHEAD;
	bl	handle_hmi_exception
	b	ret_from_except
1:	cmpwi	cr0,r3,0x900
	bne	1f
	addi	r3,r1,STACK_FRAME_OVERHEAD;
	bl	timer_interrupt
	b	ret_from_except
#ifdef CONFIG_PPC_DOORBELL
1:
#ifdef CONFIG_PPC_BOOK3E
	cmpwi	cr0,r3,0x280
#else
	BEGIN_FTR_SECTION
		cmpwi	cr0,r3,0xe80
	FTR_SECTION_ELSE
		cmpwi	cr0,r3,0xa00
	ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE)
#endif /* CONFIG_PPC_BOOK3E */
	bne	1f
	addi	r3,r1,STACK_FRAME_OVERHEAD;
	bl	doorbell_exception
	b	ret_from_except
#endif /* CONFIG_PPC_DOORBELL */
1:	b	ret_from_except /* What else to do here ? */
 
unrecov_restore:
	addi	r3,r1,STACK_FRAME_OVERHEAD
	bl	unrecoverable_exception
	b	unrecov_restore

#ifdef CONFIG_PPC_RTAS
/*
 * On CHRP, the Run-Time Abstraction Services (RTAS) have to be
 * called with the MMU off.
 *
 * In addition, we need to be in 32b mode, at least for now.
 * 
 * Note: r3 is an input parameter to rtas, so don't trash it...
 */
_GLOBAL(enter_rtas)
	mflr	r0
	std	r0,16(r1)
        stdu	r1,-RTAS_FRAME_SIZE(r1)	/* Save SP and create stack space. */

	/* Because RTAS is running in 32b mode, it clobbers the high order half
	 * of all registers that it saves.  We therefore save those registers
	 * RTAS might touch to the stack.  (r0, r3-r13 are caller saved)
   	 */
	SAVE_GPR(2, r1)			/* Save the TOC */
	SAVE_GPR(13, r1)		/* Save paca */
	SAVE_8GPRS(14, r1)		/* Save the non-volatiles */
	SAVE_10GPRS(22, r1)		/* ditto */

	mfcr	r4
	std	r4,_CCR(r1)
	mfctr	r5
	std	r5,_CTR(r1)
	mfspr	r6,SPRN_XER
	std	r6,_XER(r1)
	mfdar	r7
	std	r7,_DAR(r1)
	mfdsisr	r8
	std	r8,_DSISR(r1)

	/* Temporary workaround to clear CR until RTAS can be modified to
	 * ignore all bits.
	 */
	li	r0,0
	mtcr	r0

#ifdef CONFIG_BUG	
	/* There is no way it is acceptable to get here with interrupts enabled,
	 * check it with the asm equivalent of WARN_ON
	 */
	lbz	r0,PACASOFTIRQEN(r13)
1:	tdnei	r0,0
	EMIT_BUG_ENTRY 1b,__FILE__,__LINE__,BUGFLAG_WARNING
#endif
	
	/* Hard-disable interrupts */
	mfmsr	r6
	rldicl	r7,r6,48,1
	rotldi	r7,r7,16
	mtmsrd	r7,1

	/* Unfortunately, the stack pointer and the MSR are also clobbered,
	 * so they are saved in the PACA which allows us to restore
	 * our original state after RTAS returns.
         */
	std	r1,PACAR1(r13)
        std	r6,PACASAVEDMSR(r13)

	/* Setup our real return addr */	
	LOAD_REG_ADDR(r4,rtas_return_loc)
	clrldi	r4,r4,2			/* convert to realmode address */
       	mtlr	r4

	li	r0,0
	ori	r0,r0,MSR_EE|MSR_SE|MSR_BE|MSR_RI
	andc	r0,r6,r0
	
        li      r9,1
        rldicr  r9,r9,MSR_SF_LG,(63-MSR_SF_LG)
	ori	r9,r9,MSR_IR|MSR_DR|MSR_FE0|MSR_FE1|MSR_FP|MSR_RI|MSR_LE
	andc	r6,r0,r9
	sync				/* disable interrupts so SRR0/1 */
	mtmsrd	r0			/* don't get trashed */

	LOAD_REG_ADDR(r4, rtas)
	ld	r5,RTASENTRY(r4)	/* get the rtas->entry value */
	ld	r4,RTASBASE(r4)		/* get the rtas->base value */
	
	mtspr	SPRN_SRR0,r5
	mtspr	SPRN_SRR1,r6
	rfid
	b	.	/* prevent speculative execution */

rtas_return_loc:
	FIXUP_ENDIAN

	/* relocation is off at this point */
	GET_PACA(r4)
	clrldi	r4,r4,2			/* convert to realmode address */

	bcl	20,31,$+4
0:	mflr	r3
	ld	r3,(1f-0b)(r3)		/* get &rtas_restore_regs */

	mfmsr   r6
	li	r0,MSR_RI
	andc	r6,r6,r0
	sync	
	mtmsrd  r6
        
        ld	r1,PACAR1(r4)           /* Restore our SP */
        ld	r4,PACASAVEDMSR(r4)     /* Restore our MSR */

	mtspr	SPRN_SRR0,r3
	mtspr	SPRN_SRR1,r4
	rfid
	b	.	/* prevent speculative execution */

	.align	3
1:	.llong	rtas_restore_regs

rtas_restore_regs:
	/* relocation is on at this point */
	REST_GPR(2, r1)			/* Restore the TOC */
	REST_GPR(13, r1)		/* Restore paca */
	REST_8GPRS(14, r1)		/* Restore the non-volatiles */
	REST_10GPRS(22, r1)		/* ditto */

	GET_PACA(r13)

	ld	r4,_CCR(r1)
	mtcr	r4
	ld	r5,_CTR(r1)
	mtctr	r5
	ld	r6,_XER(r1)
	mtspr	SPRN_XER,r6
	ld	r7,_DAR(r1)
	mtdar	r7
	ld	r8,_DSISR(r1)
	mtdsisr	r8

        addi	r1,r1,RTAS_FRAME_SIZE	/* Unstack our frame */
	ld	r0,16(r1)		/* get return address */

	mtlr    r0
        blr				/* return to caller */

#endif /* CONFIG_PPC_RTAS */

_GLOBAL(enter_prom)
	mflr	r0
	std	r0,16(r1)
        stdu	r1,-PROM_FRAME_SIZE(r1)	/* Save SP and create stack space */

	/* Because PROM is running in 32b mode, it clobbers the high order half
	 * of all registers that it saves.  We therefore save those registers
	 * PROM might touch to the stack.  (r0, r3-r13 are caller saved)
   	 */
	SAVE_GPR(2, r1)
	SAVE_GPR(13, r1)
	SAVE_8GPRS(14, r1)
	SAVE_10GPRS(22, r1)
	mfcr	r10
	mfmsr	r11
	std	r10,_CCR(r1)
	std	r11,_MSR(r1)

	/* Put PROM address in SRR0 */
	mtsrr0	r4

	/* Setup our trampoline return addr in LR */
	bcl	20,31,$+4
0:	mflr	r4
	addi	r4,r4,(1f - 0b)
       	mtlr	r4

	/* Prepare a 32-bit mode big endian MSR
	 */
#ifdef CONFIG_PPC_BOOK3E
	rlwinm	r11,r11,0,1,31
	mtsrr1	r11
	rfi
#else /* CONFIG_PPC_BOOK3E */
	LOAD_REG_IMMEDIATE(r12, MSR_SF | MSR_ISF | MSR_LE)
	andc	r11,r11,r12
	mtsrr1	r11
	rfid
#endif /* CONFIG_PPC_BOOK3E */

1:	/* Return from OF */
	FIXUP_ENDIAN

	/* Just make sure that r1 top 32 bits didn't get
	 * corrupt by OF
	 */
	rldicl	r1,r1,0,32

	/* Restore the MSR (back to 64 bits) */
	ld	r0,_MSR(r1)
	MTMSRD(r0)
        isync

	/* Restore other registers */
	REST_GPR(2, r1)
	REST_GPR(13, r1)
	REST_8GPRS(14, r1)
	REST_10GPRS(22, r1)
	ld	r4,_CCR(r1)
	mtcr	r4
	
        addi	r1,r1,PROM_FRAME_SIZE
	ld	r0,16(r1)
	mtlr    r0
        blr

#ifdef CONFIG_FUNCTION_TRACER
#ifdef CONFIG_DYNAMIC_FTRACE
_GLOBAL(mcount)
_GLOBAL(_mcount)
	mflr	r12
	mtctr	r12
	mtlr	r0
	bctr

#ifndef CC_USING_MPROFILE_KERNEL
_GLOBAL_TOC(ftrace_caller)
	/* Taken from output of objdump from lib64/glibc */
	mflr	r3
	ld	r11, 0(r1)
	stdu	r1, -112(r1)
	std	r3, 128(r1)
	ld	r4, 16(r11)
	subi	r3, r3, MCOUNT_INSN_SIZE
.globl ftrace_call
ftrace_call:
	bl	ftrace_stub
	nop
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
.globl ftrace_graph_call
ftrace_graph_call:
	b	ftrace_graph_stub
_GLOBAL(ftrace_graph_stub)
#endif
	ld	r0, 128(r1)
	mtlr	r0
	addi	r1, r1, 112

#else /* CC_USING_MPROFILE_KERNEL */
/*
 *
 * ftrace_caller() is the function that replaces _mcount() when ftrace is
 * active.
 *
 * We arrive here after a function A calls function B, and we are the trace
 * function for B. When we enter r1 points to A's stack frame, B has not yet
 * had a chance to allocate one yet.
 *
 * Additionally r2 may point either to the TOC for A, or B, depending on
 * whether B did a TOC setup sequence before calling us.
 *
 * On entry the LR points back to the _mcount() call site, and r0 holds the
 * saved LR as it was on entry to B, ie. the original return address at the
 * call site in A.
 *
 * Our job is to save the register state into a struct pt_regs (on the stack)
 * and then arrange for the ftrace function to be called.
 */
_GLOBAL(ftrace_caller)
	/* Save the original return address in A's stack frame */
	std	r0,LRSAVE(r1)

	/* Create our stack frame + pt_regs */
	stdu	r1,-SWITCH_FRAME_SIZE(r1)

	/* Save all gprs to pt_regs */
	SAVE_8GPRS(0,r1)
	SAVE_8GPRS(8,r1)
	SAVE_8GPRS(16,r1)
	SAVE_8GPRS(24,r1)

	/* Load special regs for save below */
	mfmsr   r8
	mfctr   r9
	mfxer   r10
	mfcr	r11

	/* Get the _mcount() call site out of LR */
	mflr	r7
	/* Save it as pt_regs->nip & pt_regs->link */
	std     r7, _NIP(r1)
	std     r7, _LINK(r1)

	/* Save callee's TOC in the ABI compliant location */
	std	r2, 24(r1)
	ld	r2,PACATOC(r13)	/* get kernel TOC in r2 */

	addis	r3,r2,function_trace_op@toc@ha
	addi	r3,r3,function_trace_op@toc@l
	ld	r5,0(r3)

#ifdef CONFIG_LIVEPATCH
	mr	r14,r7		/* remember old NIP */
#endif
	/* Calculate ip from nip-4 into r3 for call below */
	subi    r3, r7, MCOUNT_INSN_SIZE

	/* Put the original return address in r4 as parent_ip */
	mr	r4, r0

	/* Save special regs */
	std     r8, _MSR(r1)
	std     r9, _CTR(r1)
	std     r10, _XER(r1)
	std     r11, _CCR(r1)

	/* Load &pt_regs in r6 for call below */
	addi    r6, r1 ,STACK_FRAME_OVERHEAD

	/* ftrace_call(r3, r4, r5, r6) */
.globl ftrace_call
ftrace_call:
	bl	ftrace_stub
	nop

	/* Load ctr with the possibly modified NIP */
	ld	r3, _NIP(r1)
	mtctr	r3
#ifdef CONFIG_LIVEPATCH
	cmpd	r14,r3		/* has NIP been altered? */
#endif

	/* Restore gprs */
	REST_8GPRS(0,r1)
	REST_8GPRS(8,r1)
	REST_8GPRS(16,r1)
	REST_8GPRS(24,r1)

	/* Restore callee's TOC */
	ld	r2, 24(r1)

	/* Pop our stack frame */
	addi r1, r1, SWITCH_FRAME_SIZE

	/* Restore original LR for return to B */
	ld	r0, LRSAVE(r1)
	mtlr	r0

#ifdef CONFIG_LIVEPATCH
        /* Based on the cmpd above, if the NIP was altered handle livepatch */
	bne-	livepatch_handler
#endif

#ifdef CONFIG_FUNCTION_GRAPH_TRACER
	stdu	r1, -112(r1)
.globl ftrace_graph_call
ftrace_graph_call:
	b	ftrace_graph_stub
_GLOBAL(ftrace_graph_stub)
	addi	r1, r1, 112
#endif

	ld	r0,LRSAVE(r1)	/* restore callee's lr at _mcount site */
	mtlr	r0
	bctr			/* jump after _mcount site */
#endif /* CC_USING_MPROFILE_KERNEL */

_GLOBAL(ftrace_stub)
	blr

#ifdef CONFIG_LIVEPATCH
	/*
	 * This function runs in the mcount context, between two functions. As
	 * such it can only clobber registers which are volatile and used in
	 * function linkage.
	 *
	 * We get here when a function A, calls another function B, but B has
	 * been live patched with a new function C.
	 *
	 * On entry:
	 *  - we have no stack frame and can not allocate one
	 *  - LR points back to the original caller (in A)
	 *  - CTR holds the new NIP in C
	 *  - r0 & r12 are free
	 *
	 * r0 can't be used as the base register for a DS-form load or store, so
	 * we temporarily shuffle r1 (stack pointer) into r0 and then put it back.
	 */
livepatch_handler:
	CURRENT_THREAD_INFO(r12, r1)

	/* Save stack pointer into r0 */
	mr	r0, r1

	/* Allocate 3 x 8 bytes */
	ld	r1, TI_livepatch_sp(r12)
	addi	r1, r1, 24
	std	r1, TI_livepatch_sp(r12)

	/* Save toc & real LR on livepatch stack */
	std	r2,  -24(r1)
	mflr	r12
	std	r12, -16(r1)

	/* Store stack end marker */
	lis     r12, STACK_END_MAGIC@h
	ori     r12, r12, STACK_END_MAGIC@l
	std	r12, -8(r1)

	/* Restore real stack pointer */
	mr	r1, r0

	/* Put ctr in r12 for global entry and branch there */
	mfctr	r12
	bctrl

	/*
	 * Now we are returning from the patched function to the original
	 * caller A. We are free to use r0 and r12, and we can use r2 until we
	 * restore it.
	 */

	CURRENT_THREAD_INFO(r12, r1)

	/* Save stack pointer into r0 */
	mr	r0, r1

	ld	r1, TI_livepatch_sp(r12)

	/* Check stack marker hasn't been trashed */
	lis     r2,  STACK_END_MAGIC@h
	ori     r2,  r2, STACK_END_MAGIC@l
	ld	r12, -8(r1)
1:	tdne	r12, r2
	EMIT_BUG_ENTRY 1b, __FILE__, __LINE__ - 1, 0

	/* Restore LR & toc from livepatch stack */
	ld	r12, -16(r1)
	mtlr	r12
	ld	r2,  -24(r1)

	/* Pop livepatch stack frame */
	CURRENT_THREAD_INFO(r12, r0)
	subi	r1, r1, 24
	std	r1, TI_livepatch_sp(r12)

	/* Restore real stack pointer */
	mr	r1, r0

	/* Return to original caller of live patched function */
	blr
#endif


#else
_GLOBAL_TOC(_mcount)
	/* Taken from output of objdump from lib64/glibc */
	mflr	r3
	ld	r11, 0(r1)
	stdu	r1, -112(r1)
	std	r3, 128(r1)
	ld	r4, 16(r11)

	subi	r3, r3, MCOUNT_INSN_SIZE
	LOAD_REG_ADDR(r5,ftrace_trace_function)
	ld	r5,0(r5)
	ld	r5,0(r5)
	mtctr	r5
	bctrl
	nop


#ifdef CONFIG_FUNCTION_GRAPH_TRACER
	b	ftrace_graph_caller
#endif
	ld	r0, 128(r1)
	mtlr	r0
	addi	r1, r1, 112
_GLOBAL(ftrace_stub)
	blr

#endif /* CONFIG_DYNAMIC_FTRACE */

#ifdef CONFIG_FUNCTION_GRAPH_TRACER
#ifndef CC_USING_MPROFILE_KERNEL
_GLOBAL(ftrace_graph_caller)
	/* load r4 with local address */
	ld	r4, 128(r1)
	subi	r4, r4, MCOUNT_INSN_SIZE

	/* Grab the LR out of the caller stack frame */
	ld	r11, 112(r1)
	ld	r3, 16(r11)

	bl	prepare_ftrace_return
	nop

	/*
	 * prepare_ftrace_return gives us the address we divert to.
	 * Change the LR in the callers stack frame to this.
	 */
	ld	r11, 112(r1)
	std	r3, 16(r11)

	ld	r0, 128(r1)
	mtlr	r0
	addi	r1, r1, 112
	blr

#else /* CC_USING_MPROFILE_KERNEL */
_GLOBAL(ftrace_graph_caller)
	/* with -mprofile-kernel, parameter regs are still alive at _mcount */
	std	r10, 104(r1)
	std	r9, 96(r1)
	std	r8, 88(r1)
	std	r7, 80(r1)
	std	r6, 72(r1)
	std	r5, 64(r1)
	std	r4, 56(r1)
	std	r3, 48(r1)

	/* Save callee's TOC in the ABI compliant location */
	std	r2, 24(r1)
	ld	r2, PACATOC(r13)	/* get kernel TOC in r2 */

	mfctr	r4		/* ftrace_caller has moved local addr here */
	std	r4, 40(r1)
	mflr	r3		/* ftrace_caller has restored LR from stack */
	subi	r4, r4, MCOUNT_INSN_SIZE

	bl	prepare_ftrace_return
	nop

	/*
	 * prepare_ftrace_return gives us the address we divert to.
	 * Change the LR to this.
	 */
	mtlr	r3

	ld	r0, 40(r1)
	mtctr	r0
	ld	r10, 104(r1)
	ld	r9, 96(r1)
	ld	r8, 88(r1)
	ld	r7, 80(r1)
	ld	r6, 72(r1)
	ld	r5, 64(r1)
	ld	r4, 56(r1)
	ld	r3, 48(r1)

	/* Restore callee's TOC */
	ld	r2, 24(r1)

	addi	r1, r1, 112
	mflr	r0
	std	r0, LRSAVE(r1)
	bctr
#endif /* CC_USING_MPROFILE_KERNEL */

_GLOBAL(return_to_handler)
	/* need to save return values */
	std	r4,  -32(r1)
	std	r3,  -24(r1)
	/* save TOC */
	std	r2,  -16(r1)
	std	r31, -8(r1)
	mr	r31, r1
	stdu	r1, -112(r1)

	/*
	 * We might be called from a module.
	 * Switch to our TOC to run inside the core kernel.
	 */
	ld	r2, PACATOC(r13)

	bl	ftrace_return_to_handler
	nop

	/* return value has real return address */
	mtlr	r3

	ld	r1, 0(r1)
	ld	r4,  -32(r1)
	ld	r3,  -24(r1)
	ld	r2,  -16(r1)
	ld	r31, -8(r1)

	/* Jump back to real return address */
	blr
#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
#endif /* CONFIG_FUNCTION_TRACER */