ACPI: ACPICA 20060608
Converted the locking mutex used for the ACPI hardware
to a spinlock. This change should eliminate all problems
caused by attempting to acquire a semaphore at interrupt
level, and it means that all ACPICA external interfaces
that directly access the ACPI hardware can be safely
called from interrupt level.
Fixed a regression introduced in 20060526 where the ACPI
device initialization could be prematurely aborted with
an AE_NOT_FOUND if a device did not have an optional
_INI method.
Fixed an IndexField issue where a write to the Data
Register should be limited in size to the AccessSize
(width) of the IndexField itself. (BZ 433, Fiodor Suietov)
Fixed problem reports (Valery Podrezov) integrated: - Allow
store of ThermalZone objects to Debug object.
http://bugzilla.kernel.org/show_bug.cgi?id=5369
http://bugzilla.kernel.org/show_bug.cgi?id=5370
Fixed problem reports (Fiodor Suietov) integrated: -
acpi_get_table_header() doesn't handle multiple instances
correctly (BZ 364)
Removed four global mutexes that were obsolete and were
no longer being used.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
diff --git a/drivers/acpi/dispatcher/dsmethod.c b/drivers/acpi/dispatcher/dsmethod.c
index 21f0599..bc9aca4 100644
--- a/drivers/acpi/dispatcher/dsmethod.c
+++ b/drivers/acpi/dispatcher/dsmethod.c
@@ -507,7 +507,7 @@
* If this is the last thread executing the method,
* we have additional cleanup to perform
*/
- status = acpi_ut_acquire_mutex(ACPI_MTX_PARSER);
+ status = acpi_ut_acquire_mutex(ACPI_MTX_CONTROL_METHOD);
if (ACPI_FAILURE(status)) {
return_VOID;
}
@@ -600,7 +600,7 @@
}
exit:
- (void)acpi_ut_release_mutex(ACPI_MTX_PARSER);
+ (void)acpi_ut_release_mutex(ACPI_MTX_CONTROL_METHOD);
return_VOID;
}
diff --git a/drivers/acpi/events/evgpe.c b/drivers/acpi/events/evgpe.c
index 23fe53b..f01d339 100644
--- a/drivers/acpi/events/evgpe.c
+++ b/drivers/acpi/events/evgpe.c
@@ -382,6 +382,7 @@
u32 status_reg;
u32 enable_reg;
acpi_cpu_flags flags;
+ acpi_cpu_flags hw_flags;
acpi_native_uint i;
acpi_native_uint j;
@@ -393,9 +394,12 @@
return (int_status);
}
- /* Examine all GPE blocks attached to this interrupt level */
+ /* We need to hold the GPE lock now, hardware lock in the loop */
flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
+
+ /* Examine all GPE blocks attached to this interrupt level */
+
gpe_block = gpe_xrupt_list->gpe_block_list_head;
while (gpe_block) {
/*
@@ -409,6 +413,8 @@
gpe_register_info = &gpe_block->register_info[i];
+ hw_flags = acpi_os_acquire_lock(acpi_gbl_hardware_lock);
+
/* Read the Status Register */
status =
@@ -417,6 +423,8 @@
&gpe_register_info->
status_address);
if (ACPI_FAILURE(status)) {
+ acpi_os_release_lock(acpi_gbl_hardware_lock,
+ hw_flags);
goto unlock_and_exit;
}
@@ -427,6 +435,8 @@
&enable_reg,
&gpe_register_info->
enable_address);
+ acpi_os_release_lock(acpi_gbl_hardware_lock, hw_flags);
+
if (ACPI_FAILURE(status)) {
goto unlock_and_exit;
}
@@ -499,7 +509,6 @@
static void ACPI_SYSTEM_XFACE acpi_ev_asynch_execute_gpe_method(void *context)
{
struct acpi_gpe_event_info *gpe_event_info = (void *)context;
- u32 gpe_number = 0;
acpi_status status;
struct acpi_gpe_event_info local_gpe_event_info;
struct acpi_evaluate_info *info;
@@ -565,10 +574,10 @@
if (ACPI_FAILURE(status)) {
ACPI_EXCEPTION((AE_INFO, status,
- "While evaluating method [%4.4s] for GPE[%2X]",
+ "While evaluating GPE method [%4.4s]",
acpi_ut_get_node_name
(local_gpe_event_info.dispatch.
- method_node), gpe_number));
+ method_node)));
}
}
diff --git a/drivers/acpi/executer/exfldio.c b/drivers/acpi/executer/exfldio.c
index 3b7c435..051053f 100644
--- a/drivers/acpi/executer/exfldio.c
+++ b/drivers/acpi/executer/exfldio.c
@@ -785,6 +785,7 @@
{
acpi_status status;
acpi_integer mask;
+ acpi_integer width_mask;
acpi_integer merged_datum;
acpi_integer raw_datum = 0;
u32 field_offset = 0;
@@ -809,8 +810,11 @@
/* Compute the number of datums (access width data items) */
+ width_mask =
+ ACPI_MASK_BITS_ABOVE(obj_desc->common_field.access_bit_width);
mask =
- ACPI_MASK_BITS_BELOW(obj_desc->common_field.start_field_bit_offset);
+ width_mask & ACPI_MASK_BITS_BELOW(obj_desc->common_field.
+ start_field_bit_offset);
datum_count = ACPI_ROUND_UP_TO(obj_desc->common_field.bit_length,
obj_desc->common_field.access_bit_width);
@@ -850,7 +854,7 @@
merged_datum = raw_datum >>
(obj_desc->common_field.access_bit_width -
obj_desc->common_field.start_field_bit_offset);
- mask = ACPI_INTEGER_MAX;
+ mask = width_mask;
if (i == datum_count) {
break;
diff --git a/drivers/acpi/executer/exoparg1.c b/drivers/acpi/executer/exoparg1.c
index 8284c52..6374d8b 100644
--- a/drivers/acpi/executer/exoparg1.c
+++ b/drivers/acpi/executer/exoparg1.c
@@ -322,8 +322,9 @@
/* Since the bit position is one-based, subtract from 33 (65) */
- return_desc->integer.value = temp32 == 0 ? 0 :
- (ACPI_INTEGER_BIT_SIZE + 1) - temp32;
+ return_desc->integer.value =
+ temp32 ==
+ 0 ? 0 : (ACPI_INTEGER_BIT_SIZE + 1) - temp32;
break;
case AML_FROM_BCD_OP: /* from_bcd (BCDValue, Result) */
@@ -698,6 +699,7 @@
if (ACPI_FAILURE(status)) {
goto cleanup;
}
+
/* Allocate a descriptor to hold the type. */
return_desc = acpi_ut_create_internal_object(ACPI_TYPE_INTEGER);
@@ -967,7 +969,6 @@
acpi_ut_add_reference
(return_desc);
}
-
break;
default:
@@ -987,7 +988,6 @@
if (ACPI_GET_DESCRIPTOR_TYPE(return_desc) ==
ACPI_DESC_TYPE_NAMED) {
-
return_desc =
acpi_ns_get_attached_object((struct
acpi_namespace_node
@@ -1002,7 +1002,7 @@
default:
ACPI_ERROR((AE_INFO,
- "Unknown opcode in ref(%p) - %X",
+ "Unknown opcode in reference(%p) - %X",
operand[0],
operand[0]->reference.opcode));
diff --git a/drivers/acpi/executer/exresnte.c b/drivers/acpi/executer/exresnte.c
index f9b9f50..3089b05 100644
--- a/drivers/acpi/executer/exresnte.c
+++ b/drivers/acpi/executer/exresnte.c
@@ -114,10 +114,11 @@
/*
* Several object types require no further processing:
- * 1) Devices rarely have an attached object, return the Node
+ * 1) Device/Thermal objects don't have a "real" subobject, return the Node
* 2) Method locals and arguments have a pseudo-Node
*/
- if (entry_type == ACPI_TYPE_DEVICE ||
+ if ((entry_type == ACPI_TYPE_DEVICE) ||
+ (entry_type == ACPI_TYPE_THERMAL) ||
(node->flags & (ANOBJ_METHOD_ARG | ANOBJ_METHOD_LOCAL))) {
return_ACPI_STATUS(AE_OK);
}
@@ -216,7 +217,6 @@
case ACPI_TYPE_METHOD:
case ACPI_TYPE_POWER:
case ACPI_TYPE_PROCESSOR:
- case ACPI_TYPE_THERMAL:
case ACPI_TYPE_EVENT:
case ACPI_TYPE_REGION:
diff --git a/drivers/acpi/executer/exresolv.c b/drivers/acpi/executer/exresolv.c
index 006bba0..6499de8 100644
--- a/drivers/acpi/executer/exresolv.c
+++ b/drivers/acpi/executer/exresolv.c
@@ -257,10 +257,24 @@
case AML_INT_NAMEPATH_OP: /* Reference to a named object */
- /* Get the object pointed to by the namespace node */
+ /* Dereference the name */
- *stack_ptr = (stack_desc->reference.node)->object;
- acpi_ut_add_reference(*stack_ptr);
+ if ((stack_desc->reference.node->type ==
+ ACPI_TYPE_DEVICE)
+ || (stack_desc->reference.node->type ==
+ ACPI_TYPE_THERMAL)) {
+
+ /* These node types do not have 'real' subobjects */
+
+ *stack_ptr = (void *)stack_desc->reference.node;
+ } else {
+ /* Get the object pointed to by the namespace node */
+
+ *stack_ptr =
+ (stack_desc->reference.node)->object;
+ acpi_ut_add_reference(*stack_ptr);
+ }
+
acpi_ut_remove_reference(stack_desc);
break;
diff --git a/drivers/acpi/executer/exutils.c b/drivers/acpi/executer/exutils.c
index 3ef8cd7..982c8b6 100644
--- a/drivers/acpi/executer/exutils.c
+++ b/drivers/acpi/executer/exutils.c
@@ -89,7 +89,7 @@
ACPI_FUNCTION_TRACE(ex_enter_interpreter);
- status = acpi_ut_acquire_mutex(ACPI_MTX_EXECUTE);
+ status = acpi_ut_acquire_mutex(ACPI_MTX_INTERPRETER);
if (ACPI_FAILURE(status)) {
ACPI_ERROR((AE_INFO, "Could not acquire interpreter mutex"));
}
@@ -125,7 +125,7 @@
ACPI_FUNCTION_TRACE(ex_exit_interpreter);
- status = acpi_ut_release_mutex(ACPI_MTX_EXECUTE);
+ status = acpi_ut_release_mutex(ACPI_MTX_INTERPRETER);
if (ACPI_FAILURE(status)) {
ACPI_ERROR((AE_INFO, "Could not release interpreter mutex"));
}
diff --git a/drivers/acpi/hardware/hwregs.c b/drivers/acpi/hardware/hwregs.c
index 5a3aa8d..ae142de 100644
--- a/drivers/acpi/hardware/hwregs.c
+++ b/drivers/acpi/hardware/hwregs.c
@@ -61,10 +61,13 @@
* DESCRIPTION: Clears all fixed and general purpose status bits
* THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED
*
+ * NOTE: TBD: Flags parameter is obsolete, to be removed
+ *
******************************************************************************/
acpi_status acpi_hw_clear_acpi_status(u32 flags)
{
acpi_status status;
+ acpi_cpu_flags lock_flags = 0;
ACPI_FUNCTION_TRACE(hw_clear_acpi_status);
@@ -72,12 +75,7 @@
ACPI_BITMASK_ALL_FIXED_STATUS,
(u16) acpi_gbl_FADT->xpm1a_evt_blk.address));
- if (flags & ACPI_MTX_LOCK) {
- status = acpi_ut_acquire_mutex(ACPI_MTX_HARDWARE);
- if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
- }
- }
+ lock_flags = acpi_os_acquire_lock(acpi_gbl_hardware_lock);
status = acpi_hw_register_write(ACPI_MTX_DO_NOT_LOCK,
ACPI_REGISTER_PM1_STATUS,
@@ -102,9 +100,7 @@
status = acpi_ev_walk_gpe_list(acpi_hw_clear_gpe_block);
unlock_and_exit:
- if (flags & ACPI_MTX_LOCK) {
- (void)acpi_ut_release_mutex(ACPI_MTX_HARDWARE);
- }
+ acpi_os_release_lock(acpi_gbl_hardware_lock, lock_flags);
return_ACPI_STATUS(status);
}
@@ -264,6 +260,8 @@
*
* DESCRIPTION: ACPI bit_register read function.
*
+ * NOTE: TBD: Flags parameter is obsolete, to be removed
+ *
******************************************************************************/
acpi_status acpi_get_register(u32 register_id, u32 * return_value, u32 flags)
@@ -281,23 +279,12 @@
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
- if (flags & ACPI_MTX_LOCK) {
- status = acpi_ut_acquire_mutex(ACPI_MTX_HARDWARE);
- if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
- }
- }
-
/* Read from the register */
- status = acpi_hw_register_read(ACPI_MTX_DO_NOT_LOCK,
+ status = acpi_hw_register_read(ACPI_MTX_LOCK,
bit_reg_info->parent_register,
®ister_value);
- if (flags & ACPI_MTX_LOCK) {
- (void)acpi_ut_release_mutex(ACPI_MTX_HARDWARE);
- }
-
if (ACPI_SUCCESS(status)) {
/* Normalize the value that was read */
@@ -331,12 +318,15 @@
*
* DESCRIPTION: ACPI Bit Register write function.
*
+ * NOTE: TBD: Flags parameter is obsolete, to be removed
+ *
******************************************************************************/
acpi_status acpi_set_register(u32 register_id, u32 value, u32 flags)
{
u32 register_value = 0;
struct acpi_bit_register_info *bit_reg_info;
acpi_status status;
+ acpi_cpu_flags lock_flags;
ACPI_FUNCTION_TRACE_U32(acpi_set_register, register_id);
@@ -349,12 +339,7 @@
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
- if (flags & ACPI_MTX_LOCK) {
- status = acpi_ut_acquire_mutex(ACPI_MTX_HARDWARE);
- if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
- }
- }
+ lock_flags = acpi_os_acquire_lock(acpi_gbl_hardware_lock);
/* Always do a register read first so we can insert the new bits */
@@ -462,9 +447,7 @@
unlock_and_exit:
- if (flags & ACPI_MTX_LOCK) {
- (void)acpi_ut_release_mutex(ACPI_MTX_HARDWARE);
- }
+ acpi_os_release_lock(acpi_gbl_hardware_lock, lock_flags);
/* Normalize the value that was read */
@@ -500,14 +483,12 @@
u32 value1 = 0;
u32 value2 = 0;
acpi_status status;
+ acpi_cpu_flags lock_flags = 0;
ACPI_FUNCTION_TRACE(hw_register_read);
if (ACPI_MTX_LOCK == use_lock) {
- status = acpi_ut_acquire_mutex(ACPI_MTX_HARDWARE);
- if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
- }
+ lock_flags = acpi_os_acquire_lock(acpi_gbl_hardware_lock);
}
switch (register_id) {
@@ -585,7 +566,7 @@
unlock_and_exit:
if (ACPI_MTX_LOCK == use_lock) {
- (void)acpi_ut_release_mutex(ACPI_MTX_HARDWARE);
+ acpi_os_release_lock(acpi_gbl_hardware_lock, lock_flags);
}
if (ACPI_SUCCESS(status)) {
@@ -613,14 +594,12 @@
acpi_status acpi_hw_register_write(u8 use_lock, u32 register_id, u32 value)
{
acpi_status status;
+ acpi_cpu_flags lock_flags = 0;
ACPI_FUNCTION_TRACE(hw_register_write);
if (ACPI_MTX_LOCK == use_lock) {
- status = acpi_ut_acquire_mutex(ACPI_MTX_HARDWARE);
- if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
- }
+ lock_flags = acpi_os_acquire_lock(acpi_gbl_hardware_lock);
}
switch (register_id) {
@@ -710,7 +689,7 @@
unlock_and_exit:
if (ACPI_MTX_LOCK == use_lock) {
- (void)acpi_ut_release_mutex(ACPI_MTX_HARDWARE);
+ acpi_os_release_lock(acpi_gbl_hardware_lock, lock_flags);
}
return_ACPI_STATUS(status);
diff --git a/drivers/acpi/namespace/nsinit.c b/drivers/acpi/namespace/nsinit.c
index 1c9ca6e..aec8488 100644
--- a/drivers/acpi/namespace/nsinit.c
+++ b/drivers/acpi/namespace/nsinit.c
@@ -557,10 +557,13 @@
ACPI_EXCEPTION((AE_INFO, status, "during %s._INI execution",
scope_name));
ACPI_FREE(scope_name);
- status = AE_OK;
}
#endif
+ /* Ignore errors from above */
+
+ status = AE_OK;
+
/*
* The _INI method has been run if present; call the Global Initialization
* Handler for this device.
diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c
index e80ca47..1bb558a 100644
--- a/drivers/acpi/osl.c
+++ b/drivers/acpi/osl.c
@@ -795,9 +795,6 @@
ACPI_DEBUG_PRINT((ACPI_DB_MUTEX, "Waiting for semaphore[%p|%d|%d]\n",
handle, units, timeout));
- if (in_atomic())
- timeout = 0;
-
switch (timeout) {
/*
* No Wait:
diff --git a/drivers/acpi/tables/tbutils.c b/drivers/acpi/tables/tbutils.c
index 5f14403..209a4018 100644
--- a/drivers/acpi/tables/tbutils.c
+++ b/drivers/acpi/tables/tbutils.c
@@ -160,12 +160,8 @@
ACPI_MOVE_32_TO_32(&signature, table_header->signature);
if (!acpi_ut_valid_acpi_name(signature)) {
- ACPI_ERROR((AE_INFO,
- "Table signature at %p [%p] has invalid characters",
- table_header, &signature));
-
- ACPI_WARNING((AE_INFO, "Invalid table signature found: [%4.4s]",
- ACPI_CAST_PTR(char, &signature)));
+ ACPI_ERROR((AE_INFO, "Invalid table signature 0x%8.8X",
+ signature));
ACPI_DUMP_BUFFER(table_header,
sizeof(struct acpi_table_header));
@@ -176,12 +172,9 @@
if (table_header->length < sizeof(struct acpi_table_header)) {
ACPI_ERROR((AE_INFO,
- "Invalid length in table header %p name %4.4s",
- table_header, (char *)&signature));
-
- ACPI_WARNING((AE_INFO,
- "Invalid table header length (0x%X) found",
- (u32) table_header->length));
+ "Invalid length 0x%X in table with signature %4.4s",
+ (u32) table_header->length,
+ ACPI_CAST_PTR(char, &signature)));
ACPI_DUMP_BUFFER(table_header,
sizeof(struct acpi_table_header));
diff --git a/drivers/acpi/utilities/utglobal.c b/drivers/acpi/utilities/utglobal.c
index 9450f9b..e5999c6 100644
--- a/drivers/acpi/utilities/utglobal.c
+++ b/drivers/acpi/utilities/utglobal.c
@@ -691,7 +691,7 @@
char *acpi_ut_get_mutex_name(u32 mutex_id)
{
- if (mutex_id > MAX_MUTEX) {
+ if (mutex_id > ACPI_MAX_MUTEX) {
return ("Invalid Mutex ID");
}
@@ -760,7 +760,7 @@
/* Mutex locked flags */
- for (i = 0; i < NUM_MUTEX; i++) {
+ for (i = 0; i < ACPI_NUM_MUTEX; i++) {
acpi_gbl_mutex_info[i].mutex = NULL;
acpi_gbl_mutex_info[i].thread_id = ACPI_MUTEX_NOT_ACQUIRED;
acpi_gbl_mutex_info[i].use_count = 0;
diff --git a/drivers/acpi/utilities/utmutex.c b/drivers/acpi/utilities/utmutex.c
index b851f7b..25eb343 100644
--- a/drivers/acpi/utilities/utmutex.c
+++ b/drivers/acpi/utilities/utmutex.c
@@ -73,14 +73,21 @@
/*
* Create each of the predefined mutex objects
*/
- for (i = 0; i < NUM_MUTEX; i++) {
+ for (i = 0; i < ACPI_NUM_MUTEX; i++) {
status = acpi_ut_create_mutex(i);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
}
+ /* Create the spinlocks for use at interrupt level */
+
status = acpi_os_create_lock(&acpi_gbl_gpe_lock);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+
+ status = acpi_os_create_lock(&acpi_gbl_hardware_lock);
return_ACPI_STATUS(status);
}
@@ -105,11 +112,14 @@
/*
* Delete each predefined mutex object
*/
- for (i = 0; i < NUM_MUTEX; i++) {
+ for (i = 0; i < ACPI_NUM_MUTEX; i++) {
(void)acpi_ut_delete_mutex(i);
}
+ /* Delete the spinlocks */
+
acpi_os_delete_lock(acpi_gbl_gpe_lock);
+ acpi_os_delete_lock(acpi_gbl_hardware_lock);
return_VOID;
}
@@ -131,7 +141,7 @@
ACPI_FUNCTION_TRACE_U32(ut_create_mutex, mutex_id);
- if (mutex_id > MAX_MUTEX) {
+ if (mutex_id > ACPI_MAX_MUTEX) {
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
@@ -165,7 +175,7 @@
ACPI_FUNCTION_TRACE_U32(ut_delete_mutex, mutex_id);
- if (mutex_id > MAX_MUTEX) {
+ if (mutex_id > ACPI_MAX_MUTEX) {
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
@@ -196,7 +206,7 @@
ACPI_FUNCTION_NAME(ut_acquire_mutex);
- if (mutex_id > MAX_MUTEX) {
+ if (mutex_id > ACPI_MAX_MUTEX) {
return (AE_BAD_PARAMETER);
}
@@ -213,7 +223,7 @@
* the mutex ordering rule. This indicates a coding error somewhere in
* the ACPI subsystem code.
*/
- for (i = mutex_id; i < MAX_MUTEX; i++) {
+ for (i = mutex_id; i < ACPI_MAX_MUTEX; i++) {
if (acpi_gbl_mutex_info[i].thread_id == this_thread_id) {
if (i == mutex_id) {
ACPI_ERROR((AE_INFO,
@@ -284,7 +294,7 @@
"Thread %X releasing Mutex [%s]\n", this_thread_id,
acpi_ut_get_mutex_name(mutex_id)));
- if (mutex_id > MAX_MUTEX) {
+ if (mutex_id > ACPI_MAX_MUTEX) {
return (AE_BAD_PARAMETER);
}
@@ -309,7 +319,7 @@
* ordering rule. This indicates a coding error somewhere in
* the ACPI subsystem code.
*/
- for (i = mutex_id; i < MAX_MUTEX; i++) {
+ for (i = mutex_id; i < ACPI_MAX_MUTEX; i++) {
if (acpi_gbl_mutex_info[i].thread_id == this_thread_id) {
if (i == mutex_id) {
continue;
diff --git a/include/acpi/acconfig.h b/include/acpi/acconfig.h
index 8b52e44..b9beceb 100644
--- a/include/acpi/acconfig.h
+++ b/include/acpi/acconfig.h
@@ -63,7 +63,7 @@
/* Current ACPICA subsystem version in YYYYMMDD format */
-#define ACPI_CA_VERSION 0x20060526
+#define ACPI_CA_VERSION 0x20060608
/*
* OS name, used for the _OS object. The _OS object is essentially obsolete,
@@ -171,15 +171,8 @@
#define ACPI_MAX_ADDRESS_SPACE 255
/* Array sizes. Used for range checking also */
-#define ACPI_MAX_MATCH_OPCODE 5
-#if 0
-#define ACPI_NUM_ACCESS_TYPES 6
-#define ACPI_NUM_UPDATE_RULES 3
-#define ACPI_NUM_LOCK_RULES 2
-#define ACPI_NUM_FIELD_NAMES 2
-#define ACPI_NUM_OPCODES 256
-#endif
+#define ACPI_MAX_MATCH_OPCODE 5
/* RSDP checksums */
diff --git a/include/acpi/acglobal.h b/include/acpi/acglobal.h
index 9297f29..14531d4 100644
--- a/include/acpi/acglobal.h
+++ b/include/acpi/acglobal.h
@@ -186,7 +186,7 @@
* actual OS mutex handles, indexed by the local ACPI_MUTEX_HANDLEs.
* (The table maps local handles to the real OS handles)
*/
-ACPI_EXTERN struct acpi_mutex_info acpi_gbl_mutex_info[NUM_MUTEX];
+ACPI_EXTERN struct acpi_mutex_info acpi_gbl_mutex_info[ACPI_NUM_MUTEX];
/*****************************************************************************
*
@@ -314,7 +314,11 @@
ACPI_EXTERN struct acpi_gpe_xrupt_info *acpi_gbl_gpe_xrupt_list_head;
ACPI_EXTERN struct acpi_gpe_block_info
*acpi_gbl_gpe_fadt_blocks[ACPI_MAX_GPE_BLOCKS];
+
+/* Spinlocks */
+
ACPI_EXTERN acpi_handle acpi_gbl_gpe_lock;
+ACPI_EXTERN acpi_handle acpi_gbl_hardware_lock;
/*****************************************************************************
*
diff --git a/include/acpi/aclocal.h b/include/acpi/aclocal.h
index 98c697e..1eeca7a 100644
--- a/include/acpi/aclocal.h
+++ b/include/acpi/aclocal.h
@@ -72,52 +72,55 @@
* Predefined handles for the mutex objects used within the subsystem
* All mutex objects are automatically created by acpi_ut_mutex_initialize.
*
- * The acquire/release ordering protocol is implied via this list. Mutexes
+ * The acquire/release ordering protocol is implied via this list. Mutexes
* with a lower value must be acquired before mutexes with a higher value.
*
- * NOTE: any changes here must be reflected in the acpi_gbl_mutex_names table also!
+ * NOTE: any changes here must be reflected in the acpi_gbl_mutex_names
+ * table below also!
*/
-#define ACPI_MTX_EXECUTE 0
-#define ACPI_MTX_INTERPRETER 1
-#define ACPI_MTX_PARSER 2
-#define ACPI_MTX_DISPATCHER 3
-#define ACPI_MTX_TABLES 4
-#define ACPI_MTX_OP_REGIONS 5
-#define ACPI_MTX_NAMESPACE 6
-#define ACPI_MTX_EVENTS 7
-#define ACPI_MTX_HARDWARE 8
-#define ACPI_MTX_CACHES 9
-#define ACPI_MTX_MEMORY 10
-#define ACPI_MTX_DEBUG_CMD_COMPLETE 11
-#define ACPI_MTX_DEBUG_CMD_READY 12
+#define ACPI_MTX_INTERPRETER 0 /* AML Interpreter, main lock */
+#define ACPI_MTX_CONTROL_METHOD 1 /* Control method termination [TBD: may no longer be necessary] */
+#define ACPI_MTX_TABLES 2 /* Data for ACPI tables */
+#define ACPI_MTX_NAMESPACE 3 /* ACPI Namespace */
+#define ACPI_MTX_EVENTS 4 /* Data for ACPI events */
+#define ACPI_MTX_CACHES 5 /* Internal caches, general purposes */
+#define ACPI_MTX_MEMORY 6 /* Debug memory tracking lists */
+#define ACPI_MTX_DEBUG_CMD_COMPLETE 7 /* AML debugger */
+#define ACPI_MTX_DEBUG_CMD_READY 8 /* AML debugger */
-#define MAX_MUTEX 12
-#define NUM_MUTEX MAX_MUTEX+1
+#define ACPI_MAX_MUTEX 8
+#define ACPI_NUM_MUTEX ACPI_MAX_MUTEX+1
#if defined(ACPI_DEBUG_OUTPUT) || defined(ACPI_DEBUGGER)
#ifdef DEFINE_ACPI_GLOBALS
-/* Names for the mutexes used in the subsystem */
+/* Debug names for the mutexes above */
-static char *acpi_gbl_mutex_names[] = {
- "ACPI_MTX_Execute",
+static char *acpi_gbl_mutex_names[ACPI_NUM_MUTEX] = {
"ACPI_MTX_Interpreter",
- "ACPI_MTX_Parser",
- "ACPI_MTX_Dispatcher",
+ "ACPI_MTX_Method",
"ACPI_MTX_Tables",
- "ACPI_MTX_OpRegions",
"ACPI_MTX_Namespace",
"ACPI_MTX_Events",
- "ACPI_MTX_Hardware",
"ACPI_MTX_Caches",
"ACPI_MTX_Memory",
"ACPI_MTX_DebugCmdComplete",
- "ACPI_MTX_DebugCmdReady",
+ "ACPI_MTX_DebugCmdReady"
};
#endif
#endif
+/*
+ * Predefined handles for spinlocks used within the subsystem.
+ * These spinlocks are created by acpi_ut_mutex_initialize
+ */
+#define ACPI_LOCK_GPES 0
+#define ACPI_LOCK_HARDWARE 1
+
+#define ACPI_MAX_LOCK 1
+#define ACPI_NUM_LOCK ACPI_MAX_LOCK+1
+
/* Owner IDs are used to track namespace nodes for selective deletion */
typedef u8 acpi_owner_id;
