Merge tag 'integrator-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into next/cleanup
From Linus Walleij <linus.walleij@linaro.org>:
This series will do the following:
- Switch the Integrator/AP and /CP to use the SoC bus
when booting from device tree.
- Group all devices on the SoC below this bus so as to
set a good example of how to do this. The bus was
invented by Lee Jones, let's show how it's to be used
on a DT:ed SoC.
- Fetch the special system controller offsets from two
special device tree nodes for each case and replace
the static mappings with these at boot.
- Move some static remaps to the ATAG-only code path
and delete some static maps that aren't used.
- Push dependencies on system controller remaps down
to the Integrator/AP board file and the PCIv3 driver
respectively and use only dynamic remappings.
- Fix up conditional BUG() usage in the PCIv3 driver
to be simpler and more to the point.
* tag 'integrator-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
ARM: integrator: use BUG_ON where possible
ARM: integrator: push down SC dependencies
ARM: integrator: delete static UART1 mapping
ARM: integrator: delete SC mapping on the CP
ARM: integrator: remove static CP syscon mapping
ARM: integrator: remove static AP syscon mapping
ARM: integrator: hook the CP into the SoC bus
ARM: integrator: hook the AP into the SoC bus
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
diff --git a/CREDITS b/CREDITS
index d8fe12a..2346b09 100644
--- a/CREDITS
+++ b/CREDITS
@@ -1823,6 +1823,11 @@
S: D-64295
S: Germany
+N: Avi Kivity
+E: avi.kivity@gmail.com
+D: Kernel-based Virtual Machine (KVM)
+S: Ra'annana, Israel
+
N: Andi Kleen
E: andi@firstfloor.org
U: http://www.halobates.de
diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX
index f54273e..ceb1ff7 100644
--- a/Documentation/00-INDEX
+++ b/Documentation/00-INDEX
@@ -210,6 +210,8 @@
- semantics and behavior of local atomic operations.
lockdep-design.txt
- documentation on the runtime locking correctness validator.
+lockup-watchdogs.txt
+ - info on soft and hard lockup detectors (aka nmi_watchdog).
logo.gif
- full colour GIF image of Linux logo (penguin - Tux).
logo.txt
@@ -240,8 +242,6 @@
- directory with information on the NetLabel subsystem.
networking/
- directory with info on various aspects of networking with Linux.
-nmi_watchdog.txt
- - info on NMI watchdog for SMP systems.
nommu-mmap.txt
- documentation about no-mmu memory mapping support.
numastat.txt
diff --git a/Documentation/arm64/memory.txt b/Documentation/arm64/memory.txt
index dbbdcbb..4110cca 100644
--- a/Documentation/arm64/memory.txt
+++ b/Documentation/arm64/memory.txt
@@ -27,17 +27,17 @@
-----------------------------------------------------------------------
0000000000000000 0000007fffffffff 512GB user
-ffffff8000000000 ffffffbbfffcffff ~240GB vmalloc
+ffffff8000000000 ffffffbbfffeffff ~240GB vmalloc
-ffffffbbfffd0000 ffffffbcfffdffff 64KB [guard page]
-
-ffffffbbfffe0000 ffffffbcfffeffff 64KB PCI I/O space
-
-ffffffbbffff0000 ffffffbcffffffff 64KB [guard page]
+ffffffbbffff0000 ffffffbbffffffff 64KB [guard page]
ffffffbc00000000 ffffffbdffffffff 8GB vmemmap
-ffffffbe00000000 ffffffbffbffffff ~8GB [guard, future vmmemap]
+ffffffbe00000000 ffffffbffbbfffff ~8GB [guard, future vmmemap]
+
+ffffffbffbe00000 ffffffbffbe0ffff 64KB PCI I/O space
+
+ffffffbbffff0000 ffffffbcffffffff ~2MB [guard]
ffffffbffc000000 ffffffbfffffffff 64MB modules
diff --git a/Documentation/cgroups/memory.txt b/Documentation/cgroups/memory.txt
index c07f7b4..71c4da4 100644
--- a/Documentation/cgroups/memory.txt
+++ b/Documentation/cgroups/memory.txt
@@ -466,6 +466,10 @@
5.3 swappiness
Similar to /proc/sys/vm/swappiness, but affecting a hierarchy of groups only.
+Please note that unlike the global swappiness, memcg knob set to 0
+really prevents from any swapping even if there is a swap storage
+available. This might lead to memcg OOM killer if there are no file
+pages to reclaim.
Following cgroups' swappiness can't be changed.
- root cgroup (uses /proc/sys/vm/swappiness).
diff --git a/Documentation/devicetree/bindings/arm/atmel-at91.txt b/Documentation/devicetree/bindings/arm/atmel-at91.txt
index ecc81e3..d187e9f 100644
--- a/Documentation/devicetree/bindings/arm/atmel-at91.txt
+++ b/Documentation/devicetree/bindings/arm/atmel-at91.txt
@@ -8,7 +8,7 @@
shared across all System Controller members.
TC/TCLIB Timer required properties:
-- compatible: Should be "atmel,<chip>-pit".
+- compatible: Should be "atmel,<chip>-tcb".
<chip> can be "at91rm9200" or "at91sam9x5"
- reg: Should contain registers location and length
- interrupts: Should contain all interrupts for the TC block
diff --git a/Documentation/devicetree/bindings/i2c/fsl-imx-i2c.txt b/Documentation/devicetree/bindings/i2c/fsl-imx-i2c.txt
index f3cf43b..3614242 100644
--- a/Documentation/devicetree/bindings/i2c/fsl-imx-i2c.txt
+++ b/Documentation/devicetree/bindings/i2c/fsl-imx-i2c.txt
@@ -12,13 +12,13 @@
Examples:
i2c@83fc4000 { /* I2C2 on i.MX51 */
- compatible = "fsl,imx51-i2c", "fsl,imx1-i2c";
+ compatible = "fsl,imx51-i2c", "fsl,imx21-i2c";
reg = <0x83fc4000 0x4000>;
interrupts = <63>;
};
i2c@70038000 { /* HS-I2C on i.MX51 */
- compatible = "fsl,imx51-i2c", "fsl,imx1-i2c";
+ compatible = "fsl,imx51-i2c", "fsl,imx21-i2c";
reg = <0x70038000 0x4000>;
interrupts = <64>;
clock-frequency = <400000>;
diff --git a/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt b/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt
new file mode 100644
index 0000000..df70318
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt
@@ -0,0 +1,19 @@
+* EETI eGalax Multiple Touch Controller
+
+Required properties:
+- compatible: must be "eeti,egalax_ts"
+- reg: i2c slave address
+- interrupt-parent: the phandle for the interrupt controller
+- interrupts: touch controller interrupt
+- wakeup-gpios: the gpio pin to be used for waking up the controller
+ as well as uased as irq pin
+
+Example:
+
+ egalax_ts@04 {
+ compatible = "eeti,egalax_ts";
+ reg = <0x04>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <9 2>;
+ wakeup-gpios = <&gpio1 9 0>;
+ };
diff --git a/Documentation/devicetree/bindings/net/mdio-gpio.txt b/Documentation/devicetree/bindings/net/mdio-gpio.txt
index bc954952..c79bab0 100644
--- a/Documentation/devicetree/bindings/net/mdio-gpio.txt
+++ b/Documentation/devicetree/bindings/net/mdio-gpio.txt
@@ -8,9 +8,16 @@
MDC, MDIO.
+Note: Each gpio-mdio bus should have an alias correctly numbered in "aliases"
+node.
+
Example:
-mdio {
+aliases {
+ mdio-gpio0 = <&mdio0>;
+};
+
+mdio0: mdio {
compatible = "virtual,mdio-gpio";
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.txt b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.txt
index c8e5782..683fde9 100644
--- a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.txt
+++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.txt
@@ -93,7 +93,7 @@
With some exceptions, these support nvidia,high-speed-mode,
nvidia,schmitt, nvidia,low-power-mode, nvidia,pull-down-strength,
- nvidia,pull-up-strength, nvidia,slew_rate-rising, nvidia,slew_rate-falling.
+ nvidia,pull-up-strength, nvidia,slew-rate-rising, nvidia,slew-rate-falling.
drive_ao1, drive_ao2, drive_at1, drive_at2, drive_cdev1, drive_cdev2,
drive_csus, drive_dap1, drive_dap2, drive_dap3, drive_dap4, drive_dbg,
diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra30-pinmux.txt b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra30-pinmux.txt
index c275b70..6f426ed 100644
--- a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra30-pinmux.txt
+++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra30-pinmux.txt
@@ -83,7 +83,7 @@
drive groups:
These all support nvidia,pull-down-strength, nvidia,pull-up-strength,
- nvidia,slew_rate-rising, nvidia,slew_rate-falling. Most but not all
+ nvidia,slew-rate-rising, nvidia,slew-rate-falling. Most but not all
support nvidia,high-speed-mode, nvidia,schmitt, nvidia,low-power-mode.
ao1, ao2, at1, at2, at3, at4, at5, cdev1, cdev2, cec, crt, csus, dap1,
diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index a1793d6..3844d21 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -33,7 +33,7 @@
2 Modifying System Parameters
3 Per-Process Parameters
- 3.1 /proc/<pid>/oom_score_adj - Adjust the oom-killer
+ 3.1 /proc/<pid>/oom_adj & /proc/<pid>/oom_score_adj - Adjust the oom-killer
score
3.2 /proc/<pid>/oom_score - Display current oom-killer score
3.3 /proc/<pid>/io - Display the IO accounting fields
@@ -1320,10 +1320,10 @@
CHAPTER 3: PER-PROCESS PARAMETERS
------------------------------------------------------------------------------
-3.1 /proc/<pid>/oom_score_adj- Adjust the oom-killer score
+3.1 /proc/<pid>/oom_adj & /proc/<pid>/oom_score_adj- Adjust the oom-killer score
--------------------------------------------------------------------------------
-This file can be used to adjust the badness heuristic used to select which
+These file can be used to adjust the badness heuristic used to select which
process gets killed in out of memory conditions.
The badness heuristic assigns a value to each candidate task ranging from 0
@@ -1361,6 +1361,12 @@
equivalent to discounting 50% of the task's allowed memory from being considered
as scoring against the task.
+For backwards compatibility with previous kernels, /proc/<pid>/oom_adj may also
+be used to tune the badness score. Its acceptable values range from -16
+(OOM_ADJUST_MIN) to +15 (OOM_ADJUST_MAX) and a special value of -17
+(OOM_DISABLE) to disable oom killing entirely for that task. Its value is
+scaled linearly with /proc/<pid>/oom_score_adj.
+
The value of /proc/<pid>/oom_score_adj may be reduced no lower than the last
value set by a CAP_SYS_RESOURCE process. To reduce the value any lower
requires CAP_SYS_RESOURCE.
@@ -1375,7 +1381,9 @@
-------------------------------------------------------------
This file can be used to check the current score used by the oom-killer is for
-any given <pid>.
+any given <pid>. Use it together with /proc/<pid>/oom_score_adj to tune which
+process should be killed in an out-of-memory situation.
+
3.3 /proc/<pid>/io - Display the IO accounting fields
-------------------------------------------------------
diff --git a/Documentation/firmware_class/README b/Documentation/firmware_class/README
index 7eceaff..815b711 100644
--- a/Documentation/firmware_class/README
+++ b/Documentation/firmware_class/README
@@ -18,32 +18,40 @@
High level behavior (mixed):
============================
- kernel(driver): calls request_firmware(&fw_entry, $FIRMWARE, device)
+ 1), kernel(driver):
+ - calls request_firmware(&fw_entry, $FIRMWARE, device)
+ - kernel searchs the fimware image with name $FIRMWARE directly
+ in the below search path of root filesystem:
+ "/lib/firmware/updates/" UTS_RELEASE,
+ "/lib/firmware/updates",
+ "/lib/firmware/" UTS_RELEASE,
+ "/lib/firmware"
+ - If found, goto 7), else goto 2)
- userspace:
+ 2), userspace:
- /sys/class/firmware/xxx/{loading,data} appear.
- hotplug gets called with a firmware identifier in $FIRMWARE
and the usual hotplug environment.
- hotplug: echo 1 > /sys/class/firmware/xxx/loading
- kernel: Discard any previous partial load.
+ 3), kernel: Discard any previous partial load.
- userspace:
+ 4), userspace:
- hotplug: cat appropriate_firmware_image > \
/sys/class/firmware/xxx/data
- kernel: grows a buffer in PAGE_SIZE increments to hold the image as it
+ 5), kernel: grows a buffer in PAGE_SIZE increments to hold the image as it
comes in.
- userspace:
+ 6), userspace:
- hotplug: echo 0 > /sys/class/firmware/xxx/loading
- kernel: request_firmware() returns and the driver has the firmware
+ 7), kernel: request_firmware() returns and the driver has the firmware
image in fw_entry->{data,size}. If something went wrong
request_firmware() returns non-zero and fw_entry is set to
NULL.
- kernel(driver): Driver code calls release_firmware(fw_entry) releasing
+ 8), kernel(driver): Driver code calls release_firmware(fw_entry) releasing
the firmware image and any related resource.
High level behavior (driver code):
diff --git a/Documentation/hwmon/fam15h_power b/Documentation/hwmon/fam15h_power
index a92918e..8065481 100644
--- a/Documentation/hwmon/fam15h_power
+++ b/Documentation/hwmon/fam15h_power
@@ -10,7 +10,7 @@
BIOS and Kernel Developer's Guide (BKDG) For AMD Family 15h Processors
(not yet published)
-Author: Andreas Herrmann <andreas.herrmann3@amd.com>
+Author: Andreas Herrmann <herrmann.der.user@googlemail.com>
Description
-----------
diff --git a/Documentation/networking/netdev-features.txt b/Documentation/networking/netdev-features.txt
index 4164f5c..f310ede 100644
--- a/Documentation/networking/netdev-features.txt
+++ b/Documentation/networking/netdev-features.txt
@@ -164,4 +164,4 @@
This requests that the NIC receive all possible frames, including errored
frames (such as bad FCS, etc). This can be helpful when sniffing a link with
bad packets on it. Some NICs may receive more packets if also put into normal
-PROMISC mdoe.
+PROMISC mode.
diff --git a/Documentation/networking/vxlan.txt b/Documentation/networking/vxlan.txt
index 5b34b762..6d99351 100644
--- a/Documentation/networking/vxlan.txt
+++ b/Documentation/networking/vxlan.txt
@@ -32,7 +32,7 @@
# ip link delete vxlan0
3. Show vxlan info
- # ip -d show vxlan0
+ # ip -d link show vxlan0
It is possible to create, destroy and display the vxlan
forwarding table using the new bridge command.
@@ -41,7 +41,7 @@
# bridge fdb add to 00:17:42:8a:b4:05 dst 192.19.0.2 dev vxlan0
2. Delete forwarding table entry
- # bridge fdb delete 00:17:42:8a:b4:05
+ # bridge fdb delete 00:17:42:8a:b4:05 dev vxlan0
3. Show forwarding table
# bridge fdb show dev vxlan0
diff --git a/Documentation/zh_CN/IRQ.txt b/Documentation/zh_CN/IRQ.txt
new file mode 100644
index 0000000..956026d
--- /dev/null
+++ b/Documentation/zh_CN/IRQ.txt
@@ -0,0 +1,39 @@
+Chinese translated version of Documentation/IRQ.txt
+
+If you have any comment or update to the content, please contact the
+original document maintainer directly. However, if you have a problem
+communicating in English you can also ask the Chinese maintainer for
+help. Contact the Chinese maintainer if this translation is outdated
+or if there is a problem with the translation.
+
+Maintainer: Eric W. Biederman <ebiederman@xmission.com>
+Chinese maintainer: Fu Wei <tekkamanninja@gmail.com>
+---------------------------------------------------------------------
+Documentation/IRQ.txt 的中文翻译
+
+如果想评论或更新本文的内容，请直接联系原文档的维护者。如果你使用英文
+交流有困难的话，也可以向中文版维护者求助。如果本翻译更新不及时或者翻
+译存在问题，请联系中文版维护者。
+英文版维护者： Eric W. Biederman <ebiederman@xmission.com>
+中文版维护者： 傅炜 Fu Wei <tekkamanninja@gmail.com>
+中文版翻译者： 傅炜 Fu Wei <tekkamanninja@gmail.com>
+中文版校译者： 傅炜 Fu Wei <tekkamanninja@gmail.com>
+
+
+以下为正文
+---------------------------------------------------------------------
+何为 IRQ?
+
+一个 IRQ 是来自某个设备的一个中断请求。目前，它们可以来自一个硬件引脚，
+或来自一个数据包。多个设备可能连接到同个硬件引脚，从而共享一个 IRQ。
+
+一个 IRQ 编号是用于告知硬件中断源的内核标识。通常情况下，这是一个
+全局 irq_desc 数组的索引，但是除了在 linux/interrupt.h 中的实现，
+具体的细节是体系结构特定的。
+
+一个 IRQ 编号是设备上某个可能的中断源的枚举。通常情况下，枚举的编号是
+该引脚在系统内中断控制器的所有输入引脚中的编号。对于 ISA 总线中的情况，
+枚举的是在两个 i8259 中断控制器中 16 个输入引脚。
+
+架构可以对 IRQ 编号指定额外的含义，在硬件涉及任何手工配置的情况下，
+是被提倡的。ISA 的 IRQ 是一个分配这类额外含义的典型例子。
diff --git a/Documentation/zh_CN/arm64/booting.txt b/Documentation/zh_CN/arm64/booting.txt
new file mode 100644
index 0000000..28fa325
--- /dev/null
+++ b/Documentation/zh_CN/arm64/booting.txt
@@ -0,0 +1,156 @@
+Chinese translated version of Documentation/arm64/booting.txt
+
+If you have any comment or update to the content, please contact the
+original document maintainer directly. However, if you have a problem
+communicating in English you can also ask the Chinese maintainer for
+help. Contact the Chinese maintainer if this translation is outdated
+or if there is a problem with the translation.
+
+Maintainer: Will Deacon <will.deacon@arm.com>
+Chinese maintainer: Fu Wei <tekkamanninja@gmail.com>
+---------------------------------------------------------------------
+Documentation/arm64/booting.txt 的中文翻译
+
+如果想评论或更新本文的内容，请直接联系原文档的维护者。如果你使用英文
+交流有困难的话，也可以向中文版维护者求助。如果本翻译更新不及时或者翻
+译存在问题，请联系中文版维护者。
+
+英文版维护者： Will Deacon <will.deacon@arm.com>
+中文版维护者： 傅炜 Fu Wei <tekkamanninja@gmail.com>
+中文版翻译者： 傅炜 Fu Wei <tekkamanninja@gmail.com>
+中文版校译者： 傅炜 Fu Wei <tekkamanninja@gmail.com>
+
+以下为正文
+---------------------------------------------------------------------
+ 启动 AArch64 Linux
+ ==================
+
+作者: Will Deacon <will.deacon@arm.com>
+日期: 2012 年 09 月 07 日
+
+本文档基于 Russell King 的 ARM 启动文档，且适用于所有公开发布的
+AArch64 Linux 内核代码。
+
+AArch64 异常模型由多个异常级别（EL0 - EL3）组成，对于 EL0 和 EL1
+异常级有对应的安全和非安全模式。EL2 是系统管理级，且仅存在于
+非安全模式下。EL3 是最高特权级，且仅存在于安全模式下。
+
+基于本文档的目的，我们将简单地使用‘引导装载程序’（‘boot loader’）
+这个术语来定义在将控制权交给 Linux 内核前 CPU 上执行的所有软件。
+这可能包含安全监控和系统管理代码，或者它可能只是一些用于准备最小启动
+环境的指令。
+
+基本上，引导装载程序（至少）应实现以下操作：
+
+1、设置和初始化 RAM
+2、设置设备树数据
+3、解压内核映像
+4、调用内核映像
+
+
+1、设置和初始化 RAM
+-----------------
+
+必要性: 强制
+
+引导装载程序应该找到并初始化系统中所有内核用于保持系统变量数据的 RAM。
+这个操作的执行是设备依赖的。（它可能使用内部算法来自动定位和计算所有
+RAM，或可能使用对这个设备已知的 RAM 信息，还可能使用任何引导装载程序
+设计者想到的匹配方法。）
+
+
+2、设置设备树数据
+---------------
+
+必要性: 强制
+
+设备树数据块（dtb）大小必须不大于 2 MB，且位于从内核映像起始算起第一个
+512MB 内的 2MB 边界上。这使得内核可以通过初始页表中的单个节描述符来
+映射此数据块。
+
+
+3、解压内核映像
+-------------
+
+必要性: 可选
+
+AArch64 内核当前没有提供自解压代码，因此如果使用了压缩内核映像文件
+（比如 Image.gz），则需要通过引导装载程序（使用 gzip 等）来进行解压。
+若引导装载程序没有实现这个需求，就要使用非压缩内核映像文件。
+
+
+4、调用内核映像
+-------------
+
+必要性: 强制
+
+已解压的内核映像包含一个 32 字节的头，内容如下：
+
+ u32 magic = 0x14000008; /* 跳转到 stext, 小端 */
+ u32 res0 = 0; /* 保留 */
+ u64 text_offset; /* 映像装载偏移 */
+ u64 res1 = 0; /* 保留 */
+ u64 res2 = 0; /* 保留 */
+
+映像必须位于系统 RAM 起始处的特定偏移（当前是 0x80000）。系统 RAM
+的起始地址必须是以 2MB 对齐的。
+
+在跳转入内核前，必须符合以下状态：
+
+- 停止所有 DMA 设备，这样内存数据就不会因为虚假网络包或磁盘数据而
+ 被破坏。这可能可以节省你许多的调试时间。
+
+- 主 CPU 通用寄存器设置
+ x0 = 系统 RAM 中设备树数据块（dtb）的物理地址。
+ x1 = 0 (保留，将来可能使用)
+ x2 = 0 (保留，将来可能使用)
+ x3 = 0 (保留，将来可能使用)
+
+- CPU 模式
+ 所有形式的中断必须在 PSTATE.DAIF 中被屏蔽（Debug、SError、IRQ
+ 和 FIQ）。
+ CPU 必须处于 EL2（推荐，可访问虚拟化扩展）或非安全 EL1 模式下。
+
+- 高速缓存、MMU
+ MMU 必须关闭。
+ 指令缓存开启或关闭都可以。
+ 数据缓存必须关闭且无效。
+ 外部高速缓存（如果存在）必须配置并禁用。
+
+- 架构计时器
+ CNTFRQ 必须设定为计时器的频率。
+ 如果在 EL1 模式下进入内核，则 CNTHCTL_EL2 中的 EL1PCTEN (bit 0)
+ 必须置位。
+
+- 一致性
+ 通过内核启动的所有 CPU 在内核入口地址上必须处于相同的一致性域中。
+ 这可能要根据具体实现来定义初始化过程，以使能每个CPU上对维护操作的
+ 接收。
+
+- 系统寄存器
+ 在进入内核映像的异常级中，所有构架中可写的系统寄存器必须通过软件
+ 在一个更高的异常级别下初始化，以防止在 未知 状态下运行。
+
+引导装载程序必须在每个 CPU 处于以下状态时跳入内核入口：
+
+- 主 CPU 必须直接跳入内核映像的第一条指令。通过此 CPU 传递的设备树
+ 数据块必须在每个 CPU 节点中包含以下内容：
+
+ 1、‘enable-method’属性。目前，此字段支持的值仅为字符串“spin-table”。
+
+ 2、‘cpu-release-addr’标识一个 64-bit、初始化为零的内存位置。
+
+ 引导装载程序必须生成这些设备树属性，并在跳入内核入口之前将其插入
+ 数据块。
+
+- 任何辅助 CPU 必须在内存保留区（通过设备树中的 /memreserve/ 域传递
+ 给内核）中自旋于内核之外，轮询它们的 cpu-release-addr 位置（必须
+ 包含在保留区中）。可通过插入 wfe 指令来降低忙循环开销，而主 CPU 将
+ 发出 sev 指令。当对 cpu-release-addr 所指位置的读取操作返回非零值
+ 时，CPU 必须直接跳入此值所指向的地址。
+
+- 辅助 CPU 通用寄存器设置
+ x0 = 0 (保留，将来可能使用)
+ x1 = 0 (保留，将来可能使用)
+ x2 = 0 (保留，将来可能使用)
+ x3 = 0 (保留，将来可能使用)
diff --git a/Documentation/zh_CN/arm64/memory.txt b/Documentation/zh_CN/arm64/memory.txt
new file mode 100644
index 0000000..83b5193
--- /dev/null
+++ b/Documentation/zh_CN/arm64/memory.txt
@@ -0,0 +1,93 @@
+Chinese translated version of Documentation/arm64/memory.txt
+
+If you have any comment or update to the content, please contact the
+original document maintainer directly. However, if you have a problem
+communicating in English you can also ask the Chinese maintainer for
+help. Contact the Chinese maintainer if this translation is outdated
+or if there is a problem with the translation.
+
+Maintainer: Catalin Marinas <catalin.marinas@arm.com>
+Chinese maintainer: Fu Wei <tekkamanninja@gmail.com>
+---------------------------------------------------------------------
+Documentation/arm64/memory.txt 的中文翻译
+
+如果想评论或更新本文的内容，请直接联系原文档的维护者。如果你使用英文
+交流有困难的话，也可以向中文版维护者求助。如果本翻译更新不及时或者翻
+译存在问题，请联系中文版维护者。
+
+英文版维护者： Catalin Marinas <catalin.marinas@arm.com>
+中文版维护者： 傅炜 Fu Wei <tekkamanninja@gmail.com>
+中文版翻译者： 傅炜 Fu Wei <tekkamanninja@gmail.com>
+中文版校译者： 傅炜 Fu Wei <tekkamanninja@gmail.com>
+
+以下为正文
+---------------------------------------------------------------------
+ Linux 在 AArch64 中的内存布局
+ ===========================
+
+作者: Catalin Marinas <catalin.marinas@arm.com>
+日期: 2012 年 02 月 20 日
+
+本文档描述 AArch64 Linux 内核所使用的虚拟内存布局。此构架可以实现
+页大小为 4KB 的 4 级转换表和页大小为 64KB 的 3 级转换表。
+
+AArch64 Linux 使用页大小为 4KB 的 3 级转换表配置，对于用户和内核
+都有 39-bit (512GB) 的虚拟地址空间。对于页大小为 64KB的配置，仅
+使用 2 级转换表，但内存布局相同。
+
+用户地址空间的 63:39 位为 0，而内核地址空间的相应位为 1。TTBRx 的
+选择由虚拟地址的 63 位给出。swapper_pg_dir 仅包含内核（全局）映射，
+而用户 pgd 仅包含用户（非全局）映射。swapper_pgd_dir 地址被写入
+TTBR1 中，且从不写入 TTBR0。
+
+
+AArch64 Linux 内存布局：
+
+起始地址 结束地址 大小 用途
+-----------------------------------------------------------------------
+0000000000000000 0000007fffffffff 512GB 用户空间
+
+ffffff8000000000 ffffffbbfffcffff ~240GB vmalloc
+
+ffffffbbfffd0000 ffffffbcfffdffff 64KB [防护页]
+
+ffffffbbfffe0000 ffffffbcfffeffff 64KB PCI I/O 空间
+
+ffffffbbffff0000 ffffffbcffffffff 64KB [防护页]
+
+ffffffbc00000000 ffffffbdffffffff 8GB vmemmap
+
+ffffffbe00000000 ffffffbffbffffff ~8GB [防护页，未来用于 vmmemap]
+
+ffffffbffc000000 ffffffbfffffffff 64MB 模块
+
+ffffffc000000000 ffffffffffffffff 256GB 内存空间
+
+
+4KB 页大小的转换表查找：
+
++--------+--------+--------+--------+--------+--------+--------+--------+
+|63 56|55 48|47 40|39 32|31 24|23 16|15 8|7 0|
++--------+--------+--------+--------+--------+--------+--------+--------+
+ | | | | | |
+ | | | | | v
+ | | | | | [11:0] 页内偏移
+ | | | | +-> [20:12] L3 索引
+ | | | +-----------> [29:21] L2 索引
+ | | +---------------------> [38:30] L1 索引
+ | +-------------------------------> [47:39] L0 索引 (未使用)
+ +-------------------------------------------------> [63] TTBR0/1
+
+
+64KB 页大小的转换表查找：
+
++--------+--------+--------+--------+--------+--------+--------+--------+
+|63 56|55 48|47 40|39 32|31 24|23 16|15 8|7 0|
++--------+--------+--------+--------+--------+--------+--------+--------+
+ | | | | |
+ | | | | v
+ | | | | [15:0] 页内偏移
+ | | | +----------> [28:16] L3 索引
+ | | +--------------------------> [41:29] L2 索引 (仅使用 38:29 )
+ | +-------------------------------> [47:42] L1 索引 (未使用)
+ +-------------------------------------------------> [63] TTBR0/1
diff --git a/MAINTAINERS b/MAINTAINERS
index 027ec2b..140ebd0 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -503,7 +503,7 @@
F: include/linux/altera_jtaguart.h
AMD FAM15H PROCESSOR POWER MONITORING DRIVER
-M: Andreas Herrmann <andreas.herrmann3@amd.com>
+M: Andreas Herrmann <herrmann.der.user@googlemail.com>
L: lm-sensors@lm-sensors.org
S: Maintained
F: Documentation/hwmon/fam15h_power
@@ -526,17 +526,17 @@
F: arch/x86/include/asm/geode.h
AMD IOMMU (AMD-VI)
-M: Joerg Roedel <joerg.roedel@amd.com>
+M: Joerg Roedel <joro@8bytes.org>
L: iommu@lists.linux-foundation.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu.git
-S: Supported
+S: Maintained
F: drivers/iommu/amd_iommu*.[ch]
F: include/linux/amd-iommu.h
AMD MICROCODE UPDATE SUPPORT
-M: Andreas Herrmann <andreas.herrmann3@amd.com>
+M: Andreas Herrmann <herrmann.der.user@googlemail.com>
L: amd64-microcode@amd64.org
-S: Supported
+S: Maintained
F: arch/x86/kernel/microcode_amd.c
AMS (Apple Motion Sensor) DRIVER
@@ -637,6 +637,13 @@
S: Maintained
F: arch/arm/
+ARM SUB-ARCHITECTURES
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S: MAINTAINED
+F: arch/arm/mach-*/
+F: arch/arm/plat-*/
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc.git
+
ARM PRIMECELL AACI PL041 DRIVER
M: Russell King <linux@arm.linux.org.uk>
S: Maintained
@@ -790,7 +797,6 @@
S: Maintained
T: git git://git.pengutronix.de/git/imx/linux-2.6.git
F: arch/arm/mach-imx/
-F: arch/arm/plat-mxc/
F: arch/arm/configs/imx*_defconfig
ARM/FREESCALE IMX6
@@ -834,6 +840,14 @@
F: arch/arm/mach-sa1100/jornada720.c
F: arch/arm/mach-sa1100/include/mach/jornada720.h
+ARM/IGEP MACHINE SUPPORT
+M: Enric Balletbo i Serra <eballetbo@gmail.com>
+M: Javier Martinez Canillas <javier@dowhile0.org>
+L: linux-omap@vger.kernel.org
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S: Maintained
+F: arch/arm/mach-omap2/board-igep0020.c
+
ARM/INCOME PXA270 SUPPORT
M: Marek Vasut <marek.vasut@gmail.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -2500,6 +2514,7 @@
M: Seung-Woo Kim <sw0312.kim@samsung.com>
M: Kyungmin Park <kyungmin.park@samsung.com>
L: dri-devel@lists.freedesktop.org
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos.git
S: Supported
F: drivers/gpu/drm/exynos
F: include/drm/exynos*
@@ -2700,10 +2715,10 @@
EDAC-AMD64
M: Doug Thompson <dougthompson@xmission.com>
-M: Borislav Petkov <borislav.petkov@amd.com>
+M: Borislav Petkov <bp@alien8.de>
L: linux-edac@vger.kernel.org
W: bluesmoke.sourceforge.net
-S: Supported
+S: Maintained
F: drivers/edac/amd64_edac*
EDAC-E752X
@@ -2802,6 +2817,7 @@
EXTENSIBLE FIRMWARE INTERFACE (EFI)
M: Matt Fleming <matt.fleming@intel.com>
L: linux-efi@vger.kernel.org
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/mfleming/efi.git
S: Maintained
F: Documentation/x86/efi-stub.txt
F: arch/ia64/kernel/efi.c
@@ -3589,6 +3605,49 @@
F: drivers/net/hyperv/
F: drivers/staging/hv/
+I2C OVER PARALLEL PORT
+M: Jean Delvare <khali@linux-fr.org>
+L: linux-i2c@vger.kernel.org
+S: Maintained
+F: Documentation/i2c/busses/i2c-parport
+F: Documentation/i2c/busses/i2c-parport-light
+F: drivers/i2c/busses/i2c-parport.c
+F: drivers/i2c/busses/i2c-parport-light.c
+
+I2C/SMBUS CONTROLLER DRIVERS FOR PC
+M: Jean Delvare <khali@linux-fr.org>
+L: linux-i2c@vger.kernel.org
+S: Maintained
+F: Documentation/i2c/busses/i2c-ali1535
+F: Documentation/i2c/busses/i2c-ali1563
+F: Documentation/i2c/busses/i2c-ali15x3
+F: Documentation/i2c/busses/i2c-amd756
+F: Documentation/i2c/busses/i2c-amd8111
+F: Documentation/i2c/busses/i2c-i801
+F: Documentation/i2c/busses/i2c-nforce2
+F: Documentation/i2c/busses/i2c-piix4
+F: Documentation/i2c/busses/i2c-sis5595
+F: Documentation/i2c/busses/i2c-sis630
+F: Documentation/i2c/busses/i2c-sis96x
+F: Documentation/i2c/busses/i2c-via
+F: Documentation/i2c/busses/i2c-viapro
+F: drivers/i2c/busses/i2c-ali1535.c
+F: drivers/i2c/busses/i2c-ali1563.c
+F: drivers/i2c/busses/i2c-ali15x3.c
+F: drivers/i2c/busses/i2c-amd756.c
+F: drivers/i2c/busses/i2c-amd756-s4882.c
+F: drivers/i2c/busses/i2c-amd8111.c
+F: drivers/i2c/busses/i2c-i801.c
+F: drivers/i2c/busses/i2c-isch.c
+F: drivers/i2c/busses/i2c-nforce2.c
+F: drivers/i2c/busses/i2c-nforce2-s4985.c
+F: drivers/i2c/busses/i2c-piix4.c
+F: drivers/i2c/busses/i2c-sis5595.c
+F: drivers/i2c/busses/i2c-sis630.c
+F: drivers/i2c/busses/i2c-sis96x.c
+F: drivers/i2c/busses/i2c-via.c
+F: drivers/i2c/busses/i2c-viapro.c
+
I2C/SMBUS STUB DRIVER
M: "Mark M. Hoffman" <mhoffman@lightlink.com>
L: linux-i2c@vger.kernel.org
@@ -3596,9 +3655,8 @@
F: drivers/i2c/busses/i2c-stub.c
I2C SUBSYSTEM
-M: "Jean Delvare (PC drivers, core)" <khali@linux-fr.org>
+M: Wolfram Sang <w.sang@pengutronix.de>
M: "Ben Dooks (embedded platforms)" <ben-linux@fluff.org>
-M: "Wolfram Sang (embedded platforms)" <w.sang@pengutronix.de>
L: linux-i2c@vger.kernel.org
W: http://i2c.wiki.kernel.org/
T: quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-i2c/
@@ -3609,6 +3667,13 @@
F: include/linux/i2c.h
F: include/linux/i2c-*.h
+I2C-TAOS-EVM DRIVER
+M: Jean Delvare <khali@linux-fr.org>
+L: linux-i2c@vger.kernel.org
+S: Maintained
+F: Documentation/i2c/busses/i2c-taos-evm
+F: drivers/i2c/busses/i2c-taos-evm.c
+
I2C-TINY-USB DRIVER
M: Till Harbaum <till@harbaum.org>
L: linux-i2c@vger.kernel.org
@@ -3695,7 +3760,7 @@
F: drivers/platform/x86/ideapad-laptop.c
IDE/ATAPI DRIVERS
-M: Borislav Petkov <petkovbb@gmail.com>
+M: Borislav Petkov <bp@alien8.de>
L: linux-ide@vger.kernel.org
S: Maintained
F: Documentation/cdrom/ide-cd
@@ -4222,8 +4287,8 @@
F: include/linux/sunrpc/
KERNEL VIRTUAL MACHINE (KVM)
-M: Avi Kivity <avi@redhat.com>
M: Marcelo Tosatti <mtosatti@redhat.com>
+M: Gleb Natapov <gleb@redhat.com>
L: kvm@vger.kernel.org
W: http://kvm.qumranet.com
S: Supported
@@ -5061,7 +5126,13 @@
S: Odd Fixes
F: drivers/net/
F: include/linux/if_*
-F: include/linux/*device.h
+F: include/linux/netdevice.h
+F: include/linux/arcdevice.h
+F: include/linux/etherdevice.h
+F: include/linux/fcdevice.h
+F: include/linux/fddidevice.h
+F: include/linux/hippidevice.h
+F: include/linux/inetdevice.h
NETXEN (1/10) GbE SUPPORT
M: Sony Chacko <sony.chacko@qlogic.com>
@@ -5349,7 +5420,7 @@
F: sound/drivers/opl4/
OPROFILE
-M: Robert Richter <robert.richter@amd.com>
+M: Robert Richter <rric@kernel.org>
L: oprofile-list@lists.sf.net
S: Maintained
F: arch/*/include/asm/oprofile*.h
@@ -5633,7 +5704,7 @@
F: drivers/pinctrl/spear/
PKTCDVD DRIVER
-M: Peter Osterlund <petero2@telia.com>
+M: Jiri Kosina <jkosina@suse.cz>
S: Maintained
F: drivers/block/pktcdvd.c
F: include/linux/pktcdvd.h
@@ -7195,6 +7266,14 @@
S: Maintained
F: arch/xtensa/
+THERMAL
+M: Zhang Rui <rui.zhang@intel.com>
+L: linux-pm@vger.kernel.org
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux.git
+S: Supported
+F: drivers/thermal/
+F: include/linux/thermal.h
+
THINKPAD ACPI EXTRAS DRIVER
M: Henrique de Moraes Holschuh <ibm-acpi@hmh.eng.br>
L: ibm-acpi-devel@lists.sourceforge.net
@@ -7872,13 +7951,6 @@
S: Maintained
F: drivers/net/ethernet/via/via-rhine.c
-VIAPRO SMBUS DRIVER
-M: Jean Delvare <khali@linux-fr.org>
-L: linux-i2c@vger.kernel.org
-S: Maintained
-F: Documentation/i2c/busses/i2c-viapro
-F: drivers/i2c/busses/i2c-viapro.c
-
VIA SD/MMC CARD CONTROLLER DRIVER
M: Bruce Chang <brucechang@via.com.tw>
M: Harald Welte <HaraldWelte@viatech.com>
@@ -8133,7 +8205,7 @@
X86 MCE INFRASTRUCTURE
M: Tony Luck <tony.luck@intel.com>
-M: Borislav Petkov <bp@amd64.org>
+M: Borislav Petkov <bp@alien8.de>
L: linux-edac@vger.kernel.org
S: Maintained
F: arch/x86/kernel/cpu/mcheck/*
diff --git a/Makefile b/Makefile
index 14c93b3..3d2fc46 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 3
PATCHLEVEL = 7
SUBLEVEL = 0
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc7
NAME = Terrified Chipmunk
# *DOCUMENTATION*
diff --git a/arch/alpha/include/asm/thread_info.h b/arch/alpha/include/asm/thread_info.h
index 4554ecb..1f8c729 100644
--- a/arch/alpha/include/asm/thread_info.h
+++ b/arch/alpha/include/asm/thread_info.h
@@ -7,6 +7,7 @@
#include <asm/processor.h>
#include <asm/types.h>
#include <asm/hwrpb.h>
+#include <asm/sysinfo.h>
#endif
#ifndef __ASSEMBLY__
@@ -21,6 +22,7 @@
mm_segment_t addr_limit; /* thread address space */
unsigned cpu; /* current CPU */
int preempt_count; /* 0 => preemptable, <0 => BUG */
+ unsigned int status; /* thread-synchronous flags */
int bpt_nsaved;
unsigned long bpt_addr[2]; /* breakpoint handling */
@@ -63,8 +65,6 @@
* - these are process state flags and used from assembly
* - pending work-to-be-done flags come first and must be assigned to be
* within bits 0 to 7 to fit in and immediate operand.
- * - ALPHA_UAC_SHIFT below must be kept consistent with the unaligned
- * control flags.
*
* TIF_SYSCALL_TRACE is known to be 0 via blbs.
*/
@@ -72,18 +72,12 @@
#define TIF_NOTIFY_RESUME 1 /* callback before returning to user */
#define TIF_SIGPENDING 2 /* signal pending */
#define TIF_NEED_RESCHED 3 /* rescheduling necessary */
-#define TIF_POLLING_NRFLAG 8 /* poll_idle is polling NEED_RESCHED */
#define TIF_DIE_IF_KERNEL 9 /* dik recursion lock */
-#define TIF_UAC_NOPRINT 10 /* ! Preserve sequence of following */
-#define TIF_UAC_NOFIX 11 /* ! flags as they match */
-#define TIF_UAC_SIGBUS 12 /* ! userspace part of 'osf_sysinfo' */
#define TIF_MEMDIE 13 /* is terminating due to OOM killer */
-#define TIF_RESTORE_SIGMASK 14 /* restore signal mask in do_signal */
#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE)
#define _TIF_SIGPENDING (1<<TIF_SIGPENDING)
#define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED)
-#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG)
#define _TIF_NOTIFY_RESUME (1<<TIF_NOTIFY_RESUME)
/* Work to do on interrupt/exception return. */
@@ -94,29 +88,63 @@
#define _TIF_ALLWORK_MASK (_TIF_WORK_MASK \
| _TIF_SYSCALL_TRACE)
-#define ALPHA_UAC_SHIFT TIF_UAC_NOPRINT
-#define ALPHA_UAC_MASK (1 << TIF_UAC_NOPRINT | 1 << TIF_UAC_NOFIX | \
- 1 << TIF_UAC_SIGBUS)
+#define TS_UAC_NOPRINT 0x0001 /* ! Preserve the following three */
+#define TS_UAC_NOFIX 0x0002 /* ! flags as they match */
+#define TS_UAC_SIGBUS 0x0004 /* ! userspace part of 'osf_sysinfo' */
+#define TS_RESTORE_SIGMASK 0x0008 /* restore signal mask in do_signal() */
+#define TS_POLLING 0x0010 /* idle task polling need_resched,
+ skip sending interrupt */
-#define SET_UNALIGN_CTL(task,value) ({ \
- task_thread_info(task)->flags = ((task_thread_info(task)->flags & \
- ~ALPHA_UAC_MASK) \
- | (((value) << ALPHA_UAC_SHIFT) & (1<<TIF_UAC_NOPRINT))\
- | (((value) << (ALPHA_UAC_SHIFT + 1)) & (1<<TIF_UAC_SIGBUS)) \
- | (((value) << (ALPHA_UAC_SHIFT - 1)) & (1<<TIF_UAC_NOFIX)));\
+#define tsk_is_polling(t) (task_thread_info(t)->status & TS_POLLING)
+
+#ifndef __ASSEMBLY__
+#define HAVE_SET_RESTORE_SIGMASK 1
+static inline void set_restore_sigmask(void)
+{
+ struct thread_info *ti = current_thread_info();
+ ti->status |= TS_RESTORE_SIGMASK;
+ WARN_ON(!test_bit(TIF_SIGPENDING, (unsigned long *)&ti->flags));
+}
+static inline void clear_restore_sigmask(void)
+{
+ current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
+}
+static inline bool test_restore_sigmask(void)
+{
+ return current_thread_info()->status & TS_RESTORE_SIGMASK;
+}
+static inline bool test_and_clear_restore_sigmask(void)
+{
+ struct thread_info *ti = current_thread_info();
+ if (!(ti->status & TS_RESTORE_SIGMASK))
+ return false;
+ ti->status &= ~TS_RESTORE_SIGMASK;
+ return true;
+}
+#endif
+
+#define SET_UNALIGN_CTL(task,value) ({ \
+ __u32 status = task_thread_info(task)->status & ~UAC_BITMASK; \
+ if (value & PR_UNALIGN_NOPRINT) \
+ status |= TS_UAC_NOPRINT; \
+ if (value & PR_UNALIGN_SIGBUS) \
+ status |= TS_UAC_SIGBUS; \
+ if (value & 4) /* alpha-specific */ \
+ status |= TS_UAC_NOFIX; \
+ task_thread_info(task)->status = status; \
0; })
#define GET_UNALIGN_CTL(task,value) ({ \
- put_user((task_thread_info(task)->flags & (1 << TIF_UAC_NOPRINT))\
- >> ALPHA_UAC_SHIFT \
- | (task_thread_info(task)->flags & (1 << TIF_UAC_SIGBUS))\
- >> (ALPHA_UAC_SHIFT + 1) \
- | (task_thread_info(task)->flags & (1 << TIF_UAC_NOFIX))\
- >> (ALPHA_UAC_SHIFT - 1), \
- (int __user *)(value)); \
+ __u32 status = task_thread_info(task)->status & ~UAC_BITMASK; \
+ __u32 res = 0; \
+ if (status & TS_UAC_NOPRINT) \
+ res |= PR_UNALIGN_NOPRINT; \
+ if (status & TS_UAC_SIGBUS) \
+ res |= PR_UNALIGN_SIGBUS; \
+ if (status & TS_UAC_NOFIX) \
+ res |= 4; \
+ put_user(res, (int __user *)(value)); \
})
-#define tsk_is_polling(t) test_tsk_thread_flag(t, TIF_POLLING_NRFLAG)
-
#endif /* __KERNEL__ */
#endif /* _ALPHA_THREAD_INFO_H */
diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c
index 9eb0905..14db93e 100644
--- a/arch/alpha/kernel/osf_sys.c
+++ b/arch/alpha/kernel/osf_sys.c
@@ -445,7 +445,7 @@
* unhappy with OSF UFS. [CHECKME]
*/
static int
-osf_ufs_mount(char *dirname, struct ufs_args __user *args, int flags)
+osf_ufs_mount(const char *dirname, struct ufs_args __user *args, int flags)
{
int retval;
struct cdfs_args tmp;
@@ -465,7 +465,7 @@
}
static int
-osf_cdfs_mount(char *dirname, struct cdfs_args __user *args, int flags)
+osf_cdfs_mount(const char *dirname, struct cdfs_args __user *args, int flags)
{
int retval;
struct cdfs_args tmp;
@@ -485,7 +485,7 @@
}
static int
-osf_procfs_mount(char *dirname, struct procfs_args __user *args, int flags)
+osf_procfs_mount(const char *dirname, struct procfs_args __user *args, int flags)
{
struct procfs_args tmp;
@@ -793,8 +793,7 @@
case GSI_UACPROC:
if (nbytes < sizeof(unsigned int))
return -EINVAL;
- w = (current_thread_info()->flags >> ALPHA_UAC_SHIFT) &
- UAC_BITMASK;
+ w = current_thread_info()->status & UAC_BITMASK;
if (put_user(w, (unsigned int __user *)buffer))
return -EFAULT;
return 1;
@@ -904,24 +903,20 @@
break;
case SSI_NVPAIRS: {
- unsigned long v, w, i;
- unsigned int old, new;
+ unsigned __user *p = buffer;
+ unsigned i;
- for (i = 0; i < nbytes; ++i) {
+ for (i = 0, p = buffer; i < nbytes; ++i, p += 2) {
+ unsigned v, w, status;
- if (get_user(v, 2*i + (unsigned int __user *)buffer))
- return -EFAULT;
- if (get_user(w, 2*i + 1 + (unsigned int __user *)buffer))
+ if (get_user(v, p) || get_user(w, p + 1))
return -EFAULT;
switch (v) {
case SSIN_UACPROC:
- again:
- old = current_thread_info()->flags;
- new = old & ~(UAC_BITMASK << ALPHA_UAC_SHIFT);
- new = new | (w & UAC_BITMASK) << ALPHA_UAC_SHIFT;
- if (cmpxchg(¤t_thread_info()->flags,
- old, new) != old)
- goto again;
+ w &= UAC_BITMASK;
+ status = current_thread_info()->status;
+ status = (status & ~UAC_BITMASK) | w;
+ current_thread_info()->status = status;
break;
default:
diff --git a/arch/alpha/kernel/process.c b/arch/alpha/kernel/process.c
index 4054e0f..51987dc 100644
--- a/arch/alpha/kernel/process.c
+++ b/arch/alpha/kernel/process.c
@@ -49,7 +49,7 @@
void
cpu_idle(void)
{
- set_thread_flag(TIF_POLLING_NRFLAG);
+ current_thread_info()->status |= TS_POLLING;
while (1) {
/* FIXME -- EV6 and LCA45 know how to power down
diff --git a/arch/alpha/kernel/traps.c b/arch/alpha/kernel/traps.c
index 80d987c..272666d 100644
--- a/arch/alpha/kernel/traps.c
+++ b/arch/alpha/kernel/traps.c
@@ -780,17 +780,17 @@
/* Check the UAC bits to decide what the user wants us to do
with the unaliged access. */
- if (!test_thread_flag (TIF_UAC_NOPRINT)) {
+ if (!(current_thread_info()->status & TS_UAC_NOPRINT)) {
if (__ratelimit(&ratelimit)) {
printk("%s(%d): unaligned trap at %016lx: %p %lx %ld\n",
current->comm, task_pid_nr(current),
regs->pc - 4, va, opcode, reg);
}
}
- if (test_thread_flag (TIF_UAC_SIGBUS))
+ if ((current_thread_info()->status & TS_UAC_SIGBUS))
goto give_sigbus;
/* Not sure why you'd want to use this, but... */
- if (test_thread_flag (TIF_UAC_NOFIX))
+ if ((current_thread_info()->status & TS_UAC_NOFIX))
return;
/* Don't bother reading ds in the access check since we already
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 73067ef..d45ca1b 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -433,19 +433,6 @@
Support for systems based on the DC21285 companion chip
("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
-config ARCH_MXC
- bool "Freescale MXC/iMX-based"
- select ARCH_REQUIRE_GPIOLIB
- select CLKDEV_LOOKUP
- select CLKSRC_MMIO
- select GENERIC_CLOCKEVENTS
- select GENERIC_IRQ_CHIP
- select MULTI_IRQ_HANDLER
- select SPARSE_IRQ
- select USE_OF
- help
- Support for Freescale MXC/iMX-based family of processors
-
config ARCH_MXS
bool "Freescale MXS-based"
select ARCH_REQUIRE_GPIOLIB
@@ -937,7 +924,6 @@
select CLKSRC_MMIO
select GENERIC_CLOCKEVENTS
select HAVE_CLK
- select NEED_MACH_GPIO_H
help
Support for TI's OMAP platform (OMAP1/2/3/4).
@@ -959,7 +945,6 @@
bool "Xilinx Zynq ARM Cortex A9 Platform"
select ARM_AMBA
select ARM_GIC
- select CLKDEV_LOOKUP
select CPU_V7
select GENERIC_CLOCKEVENTS
select ICST
@@ -1058,7 +1043,7 @@
source "arch/arm/mach-mv78xx0/Kconfig"
-source "arch/arm/plat-mxc/Kconfig"
+source "arch/arm/mach-imx/Kconfig"
source "arch/arm/mach-mxs/Kconfig"
@@ -1168,7 +1153,7 @@
config IWMMXT
bool "Enable iWMMXt support"
depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4
- default y if PXA27x || PXA3xx || PXA95x || ARCH_MMP
+ default y if PXA27x || PXA3xx || ARCH_MMP
help
Enable support for iWMMXt context switching at run time if
running on a CPU that supports it.
@@ -1603,8 +1588,8 @@
default "4"
config HOTPLUG_CPU
- bool "Support for hot-pluggable CPUs (EXPERIMENTAL)"
- depends on SMP && HOTPLUG && EXPERIMENTAL
+ bool "Support for hot-pluggable CPUs"
+ depends on SMP && HOTPLUG
help
Say Y here to experiment with turning CPUs off and on. CPUs
can be controlled through /sys/devices/system/cpu.
@@ -1645,8 +1630,8 @@
default 100
config THUMB2_KERNEL
- bool "Compile the kernel in Thumb-2 mode (EXPERIMENTAL)"
- depends on CPU_V7 && !CPU_V6 && !CPU_V6K && EXPERIMENTAL
+ bool "Compile the kernel in Thumb-2 mode"
+ depends on CPU_V7 && !CPU_V6 && !CPU_V6K
select AEABI
select ARM_ASM_UNIFIED
select ARM_UNWIND
@@ -1850,6 +1835,7 @@
config XEN
bool "Xen guest support on ARM (EXPERIMENTAL)"
depends on EXPERIMENTAL && ARM && OF
+ depends on CPU_V7 && !CPU_V6
help
Say Y if you want to run Linux in a Virtual Machine on Xen on ARM.
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index b0f3857..5566520 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -412,6 +412,14 @@
config DEBUG_LL_INCLUDE
string
default "debug/icedcc.S" if DEBUG_ICEDCC
+ default "debug/imx.S" if DEBUG_IMX1_UART || \
+ DEBUG_IMX25_UART || \
+ DEBUG_IMX21_IMX27_UART || \
+ DEBUG_IMX31_IMX35_UART || \
+ DEBUG_IMX51_UART || \
+ DEBUG_IMX50_IMX53_UART ||\
+ DEBUG_IMX6Q_UART2 || \
+ DEBUG_IMX6Q_UART4
default "debug/highbank.S" if DEBUG_HIGHBANK_UART
default "debug/mvebu.S" if DEBUG_MVEBU_UART
default "debug/picoxcell.S" if DEBUG_PICOXCELL_UART
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index f023e3a..97252d8 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -21,8 +21,6 @@
OBJCOPYFLAGS :=-O binary -R .comment -S
GZFLAGS :=-9
#KBUILD_CFLAGS +=-pipe
-# Explicitly specifiy 32-bit ARM ISA since toolchain default can be -mthumb:
-KBUILD_CFLAGS +=$(call cc-option,-marm,)
# Never generate .eh_frame
KBUILD_CFLAGS += $(call cc-option,-fno-dwarf2-cfi-asm)
@@ -105,17 +103,20 @@
ifeq ($(CONFIG_THUMB2_KERNEL),y)
AFLAGS_AUTOIT :=$(call as-option,-Wa$(comma)-mimplicit-it=always,-Wa$(comma)-mauto-it)
AFLAGS_NOWARN :=$(call as-option,-Wa$(comma)-mno-warn-deprecated,-Wa$(comma)-W)
-CFLAGS_THUMB2 :=-mthumb $(AFLAGS_AUTOIT) $(AFLAGS_NOWARN)
-AFLAGS_THUMB2 :=$(CFLAGS_THUMB2) -Wa$(comma)-mthumb
+CFLAGS_ISA :=-mthumb $(AFLAGS_AUTOIT) $(AFLAGS_NOWARN)
+AFLAGS_ISA :=$(CFLAGS_ISA) -Wa$(comma)-mthumb
# Work around buggy relocation from gas if requested:
ifeq ($(CONFIG_THUMB2_AVOID_R_ARM_THM_JUMP11),y)
CFLAGS_MODULE +=-fno-optimize-sibling-calls
endif
+else
+CFLAGS_ISA :=$(call cc-option,-marm,)
+AFLAGS_ISA :=$(CFLAGS_ISA)
endif
# Need -Uarm for gcc < 3.x
-KBUILD_CFLAGS +=$(CFLAGS_ABI) $(CFLAGS_THUMB2) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm
-KBUILD_AFLAGS +=$(CFLAGS_ABI) $(AFLAGS_THUMB2) $(arch-y) $(tune-y) -include asm/unified.h -msoft-float
+KBUILD_CFLAGS +=$(CFLAGS_ABI) $(CFLAGS_ISA) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm
+KBUILD_AFLAGS +=$(CFLAGS_ABI) $(AFLAGS_ISA) $(arch-y) $(tune-y) -include asm/unified.h -msoft-float
CHECKFLAGS += -D__arm__
@@ -195,10 +196,8 @@
# Platform directory name. This list is sorted alphanumerically
# by CONFIG_* macro name.
-plat-$(CONFIG_ARCH_MXC) += mxc
plat-$(CONFIG_ARCH_OMAP) += omap
plat-$(CONFIG_ARCH_S3C64XX) += samsung
-plat-$(CONFIG_ARCH_ZYNQ) += versatile
plat-$(CONFIG_PLAT_IOP) += iop
plat-$(CONFIG_PLAT_NOMADIK) += nomadik
plat-$(CONFIG_PLAT_ORION) += orion
diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile
index 3fdab01..9137df5 100644
--- a/arch/arm/boot/Makefile
+++ b/arch/arm/boot/Makefile
@@ -33,7 +33,7 @@
$(obj)/xipImage: vmlinux FORCE
$(call if_changed,objcopy)
- @echo ' Kernel: $@ is ready (physical address: $(CONFIG_XIP_PHYS_ADDR))'
+ @$(kecho) ' Kernel: $@ is ready (physical address: $(CONFIG_XIP_PHYS_ADDR))'
$(obj)/Image $(obj)/zImage: FORCE
@echo 'Kernel configured for XIP (CONFIG_XIP_KERNEL=y)'
@@ -48,14 +48,14 @@
$(obj)/Image: vmlinux FORCE
$(call if_changed,objcopy)
- @echo ' Kernel: $@ is ready'
+ @$(kecho) ' Kernel: $@ is ready'
$(obj)/compressed/vmlinux: $(obj)/Image FORCE
$(Q)$(MAKE) $(build)=$(obj)/compressed $@
$(obj)/zImage: $(obj)/compressed/vmlinux FORCE
$(call if_changed,objcopy)
- @echo ' Kernel: $@ is ready'
+ @$(kecho) ' Kernel: $@ is ready'
endif
@@ -90,7 +90,7 @@
$(obj)/uImage: $(obj)/zImage FORCE
@$(check_for_multiple_loadaddr)
$(call if_changed,uimage)
- @echo ' Image $@ is ready'
+ @$(kecho) ' Image $@ is ready'
$(obj)/bootp/bootp: $(obj)/zImage initrd FORCE
$(Q)$(MAKE) $(build)=$(obj)/bootp $@
@@ -98,7 +98,7 @@
$(obj)/bootpImage: $(obj)/bootp/bootp FORCE
$(call if_changed,objcopy)
- @echo ' Kernel: $@ is ready'
+ @$(kecho) ' Kernel: $@ is ready'
PHONY += initrd FORCE
initrd:
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index a517153..537208f 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -54,10 +54,6 @@
OBJS += head-sa1100.o
endif
-ifeq ($(CONFIG_ARCH_VT8500),y)
-OBJS += head-vt8500.o
-endif
-
ifeq ($(CONFIG_CPU_XSCALE),y)
OBJS += head-xscale.o
endif
diff --git a/arch/arm/boot/compressed/head-vt8500.S b/arch/arm/boot/compressed/head-vt8500.S
deleted file mode 100644
index 1dc1e21..0000000
--- a/arch/arm/boot/compressed/head-vt8500.S
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * linux/arch/arm/boot/compressed/head-vt8500.S
- *
- * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
- *
- * VIA VT8500 specific tweaks. This is merged into head.S by the linker.
- *
- */
-
-#include <linux/linkage.h>
-#include <asm/mach-types.h>
-
- .section ".start", "ax"
-
-__VT8500_start:
- @ Compare the SCC ID register against a list of known values
- ldr r1, .SCCID
- ldr r3, [r1]
-
- @ VT8500 override
- ldr r4, .VT8500SCC
- cmp r3, r4
- ldreq r7, .ID_BV07
- beq .Lendvt8500
-
- @ WM8505 override
- ldr r4, .WM8505SCC
- cmp r3, r4
- ldreq r7, .ID_8505
- beq .Lendvt8500
-
- @ Otherwise, leave the bootloader's machine id untouched
-
-.SCCID:
- .word 0xd8120000
-.VT8500SCC:
- .word 0x34000102
-.WM8505SCC:
- .word 0x34260103
-
-.ID_BV07:
- .word MACH_TYPE_BV07
-.ID_8505:
- .word MACH_TYPE_WM8505_7IN_NETBOOK
-
-.Lendvt8500:
diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
index b06c0db..e6391a4 100644
--- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
+++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
@@ -126,14 +126,14 @@
#size-cells = <0>;
btn3 {
- label = "Buttin 3";
+ label = "Button 3";
gpios = <&pioA 30 1>;
linux,code = <0x103>;
gpio-key,wakeup;
};
btn4 {
- label = "Buttin 4";
+ label = "Button 4";
gpios = <&pioA 31 1>;
linux,code = <0x104>;
gpio-key,wakeup;
diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi
index 748ba7a..4b0e0ca 100644
--- a/arch/arm/boot/dts/dbx5x0.dtsi
+++ b/arch/arm/boot/dts/dbx5x0.dtsi
@@ -483,6 +483,8 @@
compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
reg = <0x80004000 0x1000>;
interrupts = <0 21 0x4>;
+ arm,primecell-periphid = <0x180024>;
+
#address-cells = <1>;
#size-cells = <0>;
v-i2c-supply = <&db8500_vape_reg>;
@@ -494,6 +496,8 @@
compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
reg = <0x80122000 0x1000>;
interrupts = <0 22 0x4>;
+ arm,primecell-periphid = <0x180024>;
+
#address-cells = <1>;
#size-cells = <0>;
v-i2c-supply = <&db8500_vape_reg>;
@@ -505,6 +509,8 @@
compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
reg = <0x80128000 0x1000>;
interrupts = <0 55 0x4>;
+ arm,primecell-periphid = <0x180024>;
+
#address-cells = <1>;
#size-cells = <0>;
v-i2c-supply = <&db8500_vape_reg>;
@@ -516,6 +522,8 @@
compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
reg = <0x80110000 0x1000>;
interrupts = <0 12 0x4>;
+ arm,primecell-periphid = <0x180024>;
+
#address-cells = <1>;
#size-cells = <0>;
v-i2c-supply = <&db8500_vape_reg>;
@@ -527,6 +535,8 @@
compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
reg = <0x8012a000 0x1000>;
interrupts = <0 51 0x4>;
+ arm,primecell-periphid = <0x180024>;
+
#address-cells = <1>;
#size-cells = <0>;
v-i2c-supply = <&db8500_vape_reg>;
@@ -573,33 +583,38 @@
interrupts = <0 60 0x4>;
status = "disabled";
};
+
sdi@80118000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80118000 0x1000>;
interrupts = <0 50 0x4>;
status = "disabled";
};
+
sdi@80005000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80005000 0x1000>;
interrupts = <0 41 0x4>;
status = "disabled";
};
+
sdi@80119000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80119000 0x1000>;
interrupts = <0 59 0x4>;
status = "disabled";
};
+
sdi@80114000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80114000 0x1000>;
interrupts = <0 99 0x4>;
status = "disabled";
};
+
sdi@80008000 {
compatible = "arm,pl18x", "arm,primecell";
- reg = <0x80114000 0x1000>;
+ reg = <0x80008000 0x1000>;
interrupts = <0 100 0x4>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts
index 73567b8..a21511c 100644
--- a/arch/arm/boot/dts/exynos4210-trats.dts
+++ b/arch/arm/boot/dts/exynos4210-trats.dts
@@ -20,8 +20,10 @@
compatible = "samsung,trats", "samsung,exynos4210";
memory {
- reg = <0x40000000 0x20000000
- 0x60000000 0x20000000>;
+ reg = <0x40000000 0x10000000
+ 0x50000000 0x10000000
+ 0x60000000 0x10000000
+ 0x70000000 0x10000000>;
};
chosen {
diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi
index 9ca4ca7..6d31aa3 100644
--- a/arch/arm/boot/dts/imx23.dtsi
+++ b/arch/arm/boot/dts/imx23.dtsi
@@ -69,6 +69,7 @@
interrupts = <13>, <56>;
interrupt-names = "gpmi-dma", "bch";
clocks = <&clks 34>;
+ clock-names = "gpmi_io";
fsl,gpmi-dma-channel = <4>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
index 3e54f14..67d6727 100644
--- a/arch/arm/boot/dts/imx27.dtsi
+++ b/arch/arm/boot/dts/imx27.dtsi
@@ -113,7 +113,7 @@
i2c1: i2c@10012000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,imx27-i2c", "fsl,imx1-i2c";
+ compatible = "fsl,imx27-i2c", "fsl,imx21-i2c";
reg = <0x10012000 0x1000>;
interrupts = <12>;
status = "disabled";
@@ -205,7 +205,7 @@
i2c2: i2c@1001d000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,imx27-i2c", "fsl,imx1-i2c";
+ compatible = "fsl,imx27-i2c", "fsl,imx21-i2c";
reg = <0x1001d000 0x1000>;
interrupts = <1>;
status = "disabled";
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index e16d631..55c57ea 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -85,6 +85,7 @@
interrupts = <88>, <41>;
interrupt-names = "gpmi-dma", "bch";
clocks = <&clks 50>;
+ clock-names = "gpmi_io";
fsl,gpmi-dma-channel = <4>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
index 75d069f..54aea74 100644
--- a/arch/arm/boot/dts/imx51.dtsi
+++ b/arch/arm/boot/dts/imx51.dtsi
@@ -377,7 +377,7 @@
i2c@83fc4000 { /* I2C2 */
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,imx51-i2c", "fsl,imx1-i2c";
+ compatible = "fsl,imx51-i2c", "fsl,imx21-i2c";
reg = <0x83fc4000 0x4000>;
interrupts = <63>;
status = "disabled";
@@ -386,7 +386,7 @@
i2c@83fc8000 { /* I2C1 */
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,imx51-i2c", "fsl,imx1-i2c";
+ compatible = "fsl,imx51-i2c", "fsl,imx21-i2c";
reg = <0x83fc8000 0x4000>;
interrupts = <62>;
status = "disabled";
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index 76ebb1ad..caf09ff 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -432,7 +432,7 @@
i2c@53fec000 { /* I2C3 */
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,imx53-i2c", "fsl,imx1-i2c";
+ compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
reg = <0x53fec000 0x4000>;
interrupts = <64>;
status = "disabled";
@@ -488,7 +488,7 @@
i2c@63fc4000 { /* I2C2 */
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,imx53-i2c", "fsl,imx1-i2c";
+ compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
reg = <0x63fc4000 0x4000>;
interrupts = <63>;
status = "disabled";
@@ -497,7 +497,7 @@
i2c@63fc8000 { /* I2C1 */
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,imx53-i2c", "fsl,imx1-i2c";
+ compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
reg = <0x63fc8000 0x4000>;
interrupts = <62>;
status = "disabled";
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index f3990b0..f604a44 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -882,7 +882,7 @@
i2c@021a0000 { /* I2C1 */
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c";
+ compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
reg = <0x021a0000 0x4000>;
interrupts = <0 36 0x04>;
clocks = <&clks 125>;
@@ -892,7 +892,7 @@
i2c@021a4000 { /* I2C2 */
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c";
+ compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
reg = <0x021a4000 0x4000>;
interrupts = <0 37 0x04>;
clocks = <&clks 126>;
@@ -902,7 +902,7 @@
i2c@021a8000 { /* I2C3 */
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c";
+ compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
reg = <0x021a8000 0x4000>;
interrupts = <0 38 0x04>;
clocks = <&clks 127>;
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index f38ea87..696e929 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -257,7 +257,7 @@
interrupt-names = "common", "tx", "rx", "sidetone";
interrupt-parent = <&intc>;
ti,buffer-size = <1280>;
- ti,hwmods = "mcbsp2";
+ ti,hwmods = "mcbsp2", "mcbsp2_sidetone";
};
mcbsp3: mcbsp@49024000 {
@@ -272,7 +272,7 @@
interrupt-names = "common", "tx", "rx", "sidetone";
interrupt-parent = <&intc>;
ti,buffer-size = <128>;
- ti,hwmods = "mcbsp3";
+ ti,hwmods = "mcbsp3", "mcbsp3_sidetone";
};
mcbsp4: mcbsp@49026000 {
diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts
index c3ef1ad..74b8a47 100644
--- a/arch/arm/boot/dts/tegra20-harmony.dts
+++ b/arch/arm/boot/dts/tegra20-harmony.dts
@@ -297,131 +297,98 @@
vinldo9-supply = <&sm2_reg>;
regulators {
- #address-cells = <1>;
- #size-cells = <0>;
-
- sys_reg: regulator@0 {
- reg = <0>;
- regulator-compatible = "sys";
+ sys_reg: sys {
regulator-name = "vdd_sys";
regulator-always-on;
};
- regulator@1 {
- reg = <1>;
- regulator-compatible = "sm0";
+ sm0 {
regulator-name = "vdd_sm0,vdd_core";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
- regulator@2 {
- reg = <2>;
- regulator-compatible = "sm1";
+ sm1 {
regulator-name = "vdd_sm1,vdd_cpu";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
- sm2_reg: regulator@3 {
- reg = <3>;
- regulator-compatible = "sm2";
+ sm2_reg: sm2 {
regulator-name = "vdd_sm2,vin_ldo*";
regulator-min-microvolt = <3700000>;
regulator-max-microvolt = <3700000>;
regulator-always-on;
};
- regulator@4 {
- reg = <4>;
- regulator-compatible = "ldo0";
+ ldo0 {
regulator-name = "vdd_ldo0,vddio_pex_clk";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
- regulator@5 {
- reg = <5>;
- regulator-compatible = "ldo1";
+ ldo1 {
regulator-name = "vdd_ldo1,avdd_pll*";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-always-on;
};
- regulator@6 {
- reg = <6>;
- regulator-compatible = "ldo2";
+ ldo2 {
regulator-name = "vdd_ldo2,vdd_rtc";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
- regulator@7 {
- reg = <7>;
- regulator-compatible = "ldo3";
+ ldo3 {
regulator-name = "vdd_ldo3,avdd_usb*";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
- regulator@8 {
- reg = <8>;
- regulator-compatible = "ldo4";
+ ldo4 {
regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
- regulator@9 {
- reg = <9>;
- regulator-compatible = "ldo5";
+ ldo5 {
regulator-name = "vdd_ldo5,vcore_mmc";
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
regulator-always-on;
};
- regulator@10 {
- reg = <10>;
- regulator-compatible = "ldo6";
+ ldo6 {
regulator-name = "vdd_ldo6,avdd_vdac";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
- regulator@11 {
- reg = <11>;
- regulator-compatible = "ldo7";
+ ldo7 {
regulator-name = "vdd_ldo7,avdd_hdmi";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
- regulator@12 {
- reg = <12>;
- regulator-compatible = "ldo8";
+ ldo8 {
regulator-name = "vdd_ldo8,avdd_hdmi_pll";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
- regulator@13 {
- reg = <13>;
- regulator-compatible = "ldo9";
+ ldo9 {
regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx";
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
regulator-always-on;
};
- regulator@14 {
- reg = <14>;
- regulator-compatible = "ldo_rtc";
+ ldo_rtc {
regulator-name = "vdd_rtc_out,vdd_cell";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts
index ddf287f..6a93d14 100644
--- a/arch/arm/boot/dts/tegra20-paz00.dts
+++ b/arch/arm/boot/dts/tegra20-paz00.dts
@@ -291,37 +291,26 @@
vinldo9-supply = <&sm2_reg>;
regulators {
- #address-cells = <1>;
- #size-cells = <0>;
-
- sys_reg: regulator@0 {
- reg = <0>;
- regulator-compatible = "sys";
+ sys_reg: sys {
regulator-name = "vdd_sys";
regulator-always-on;
};
- regulator@1 {
- reg = <1>;
- regulator-compatible = "sm0";
+ sm0 {
regulator-name = "+1.2vs_sm0,vdd_core";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
- regulator@2 {
- reg = <2>;
- regulator-compatible = "sm1";
+ sm1 {
regulator-name = "+1.0vs_sm1,vdd_cpu";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
- sm2_reg: regulator@3 {
- reg = <3>;
- regulator-compatible = "sm2";
+ sm2_reg: sm2 {
regulator-name = "+3.7vs_sm2,vin_ldo*";
regulator-min-microvolt = <3700000>;
regulator-max-microvolt = <3700000>;
@@ -330,53 +319,41 @@
/* LDO0 is not connected to anything */
- regulator@5 {
- reg = <5>;
- regulator-compatible = "ldo1";
+ ldo1 {
regulator-name = "+1.1vs_ldo1,avdd_pll*";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-always-on;
};
- regulator@6 {
- reg = <6>;
- regulator-compatible = "ldo2";
+ ldo2 {
regulator-name = "+1.2vs_ldo2,vdd_rtc";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
- regulator@7 {
- reg = <7>;
- regulator-compatible = "ldo3";
+ ldo3 {
regulator-name = "+3.3vs_ldo3,avdd_usb*";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
- regulator@8 {
- reg = <8>;
- regulator-compatible = "ldo4";
+ ldo4 {
regulator-name = "+1.8vs_ldo4,avdd_osc,vddio_sys";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
- regulator@9 {
- reg = <9>;
- regulator-compatible = "ldo5";
+ ldo5 {
regulator-name = "+2.85vs_ldo5,vcore_mmc";
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
regulator-always-on;
};
- regulator@10 {
- reg = <10>;
- regulator-compatible = "ldo6";
+ ldo6 {
/*
* Research indicates this should be
* 1.8v; other boards that use this
@@ -390,34 +367,26 @@
regulator-max-microvolt = <1800000>;
};
- regulator@11 {
- reg = <11>;
- regulator-compatible = "ldo7";
+ ldo7 {
regulator-name = "+3.3vs_ldo7,avdd_hdmi";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
- regulator@12 {
- reg = <12>;
- regulator-compatible = "ldo8";
+ ldo8 {
regulator-name = "+1.8vs_ldo8,avdd_hdmi_pll";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
- regulator@13 {
- reg = <13>;
- regulator-compatible = "ldo9";
+ ldo9 {
regulator-name = "+2.85vs_ldo9,vdd_ddr_rx";
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
regulator-always-on;
};
- regulator@14 {
- reg = <14>;
- regulator-compatible = "ldo_rtc";
+ ldo_rtc {
regulator-name = "+3.3vs_rtc";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts
index f0ba901..33ae813 100644
--- a/arch/arm/boot/dts/tegra20-seaboard.dts
+++ b/arch/arm/boot/dts/tegra20-seaboard.dts
@@ -395,37 +395,26 @@
vinldo9-supply = <&sm2_reg>;
regulators {
- #address-cells = <1>;
- #size-cells = <0>;
-
- sys_reg: regulator@0 {
- reg = <0>;
- regulator-compatible = "sys";
+ sys_reg: sys {
regulator-name = "vdd_sys";
regulator-always-on;
};
- regulator@1 {
- reg = <1>;
- regulator-compatible = "sm0";
+ sm0 {
regulator-name = "vdd_sm0,vdd_core";
regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <1300000>;
regulator-always-on;
};
- regulator@2 {
- reg = <2>;
- regulator-compatible = "sm1";
+ sm1 {
regulator-name = "vdd_sm1,vdd_cpu";
regulator-min-microvolt = <1125000>;
regulator-max-microvolt = <1125000>;
regulator-always-on;
};
- sm2_reg: regulator@3 {
- reg = <3>;
- regulator-compatible = "sm2";
+ sm2_reg: sm2 {
regulator-name = "vdd_sm2,vin_ldo*";
regulator-min-microvolt = <3700000>;
regulator-max-microvolt = <3700000>;
@@ -434,86 +423,66 @@
/* LDO0 is not connected to anything */
- regulator@5 {
- reg = <5>;
- regulator-compatible = "ldo1";
+ ldo1 {
regulator-name = "vdd_ldo1,avdd_pll*";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-always-on;
};
- regulator@6 {
- reg = <6>;
- regulator-compatible = "ldo2";
+ ldo2 {
regulator-name = "vdd_ldo2,vdd_rtc";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
- regulator@7 {
- reg = <7>;
- regulator-compatible = "ldo3";
+ ldo3 {
regulator-name = "vdd_ldo3,avdd_usb*";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
- regulator@8 {
- reg = <8>;
- regulator-compatible = "ldo4";
+ ldo4 {
regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
- regulator@9 {
- reg = <9>;
- regulator-compatible = "ldo5";
+ ldo5 {
regulator-name = "vdd_ldo5,vcore_mmc";
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
regulator-always-on;
};
- regulator@10 {
- reg = <10>;
- regulator-compatible = "ldo6";
+ ldo6 {
regulator-name = "vdd_ldo6,avdd_vdac,vddio_vi,vddio_cam";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
- regulator@11 {
- reg = <11>;
- regulator-compatible = "ldo7";
+ ldo7 {
regulator-name = "vdd_ldo7,avdd_hdmi,vdd_fuse";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
- regulator@12 {
- reg = <12>;
- regulator-compatible = "ldo8";
+ ldo8 {
regulator-name = "vdd_ldo8,avdd_hdmi_pll";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
- regulator@13 {
- reg = <13>;
- regulator-compatible = "ldo9";
+ ldo9 {
regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx";
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
regulator-always-on;
};
- regulator@14 {
- reg = <14>;
- regulator-compatible = "ldo_rtc";
+ ldo_rtc {
regulator-name = "vdd_rtc_out,vdd_cell";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi
index f18cec9..5b3d8b1 100644
--- a/arch/arm/boot/dts/tegra20-tamonten.dtsi
+++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi
@@ -271,97 +271,72 @@
vinldo9-supply = <&sm2_reg>;
regulators {
- #address-cells = <1>;
- #size-cells = <0>;
-
- sys_reg: regulator@0 {
- reg = <0>;
- regulator-compatible = "sys";
+ sys_reg: sys {
regulator-name = "vdd_sys";
regulator-always-on;
};
- regulator@1 {
- reg = <1>;
- regulator-compatible = "sm0";
+ sm0 {
regulator-name = "vdd_sys_sm0,vdd_core";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
- regulator@2 {
- reg = <2>;
- regulator-compatible = "sm1";
+ sm1 {
regulator-name = "vdd_sys_sm1,vdd_cpu";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
- sm2_reg: regulator@3 {
- reg = <3>;
- regulator-compatible = "sm2";
+ sm2_reg: sm2 {
regulator-name = "vdd_sys_sm2,vin_ldo*";
regulator-min-microvolt = <3700000>;
regulator-max-microvolt = <3700000>;
regulator-always-on;
};
- regulator@4 {
- reg = <4>;
- regulator-compatible = "ldo0";
+ ldo0 {
regulator-name = "vdd_ldo0,vddio_pex_clk";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
- regulator@5 {
- reg = <5>;
- regulator-compatible = "ldo1";
+ ldo1 {
regulator-name = "vdd_ldo1,avdd_pll*";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-always-on;
};
- regulator@6 {
- reg = <6>;
- regulator-compatible = "ldo2";
+ ldo2 {
regulator-name = "vdd_ldo2,vdd_rtc";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
- regulator@7 {
- reg = <7>;
- regulator-compatible = "ldo3";
+ ldo3 {
regulator-name = "vdd_ldo3,avdd_usb*";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
- regulator@8 {
- reg = <8>;
- regulator-compatible = "ldo4";
+ ldo4 {
regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
- regulator@9 {
- reg = <9>;
- regulator-compatible = "ldo5";
+ ldo5 {
regulator-name = "vdd_ldo5,vcore_mmc";
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
};
- regulator@10 {
- reg = <10>;
- regulator-compatible = "ldo6";
+ ldo6 {
regulator-name = "vdd_ldo6,avdd_vdac";
/*
* According to the Tegra 2 Automotive
@@ -373,25 +348,19 @@
regulator-max-microvolt = <2850000>;
};
- regulator@11 {
- reg = <11>;
- regulator-compatible = "ldo7";
+ ldo7 {
regulator-name = "vdd_ldo7,avdd_hdmi";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
- regulator@12 {
- reg = <12>;
- regulator-compatible = "ldo8";
+ ldo8 {
regulator-name = "vdd_ldo8,avdd_hdmi_pll";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
- regulator@13 {
- reg = <13>;
- regulator-compatible = "ldo9";
+ ldo9 {
regulator-name = "vdd_ldo9,vdd_ddr_rx,avdd_cam";
/*
* According to the Tegra 2 Automotive
@@ -404,9 +373,7 @@
regulator-always-on;
};
- regulator@14 {
- reg = <14>;
- regulator-compatible = "ldo_rtc";
+ ldo_rtc {
regulator-name = "vdd_rtc_out";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts
index 3e5952f..86854f1 100644
--- a/arch/arm/boot/dts/tegra20-ventana.dts
+++ b/arch/arm/boot/dts/tegra20-ventana.dts
@@ -311,37 +311,26 @@
vinldo9-supply = <&sm2_reg>;
regulators {
- #address-cells = <1>;
- #size-cells = <0>;
-
- sys_reg: regulator@0 {
- reg = <0>;
- regulator-compatible = "sys";
+ sys_reg: sys {
regulator-name = "vdd_sys";
regulator-always-on;
};
- regulator@1 {
- reg = <1>;
- regulator-compatible = "sm0";
+ sm0 {
regulator-name = "vdd_sm0,vdd_core";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
- regulator@2 {
- reg = <2>;
- regulator-compatible = "sm1";
+ sm1 {
regulator-name = "vdd_sm1,vdd_cpu";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
- sm2_reg: regulator@3 {
- reg = <3>;
- regulator-compatible = "sm2";
+ sm2_reg: sm2 {
regulator-name = "vdd_sm2,vin_ldo*";
regulator-min-microvolt = <3700000>;
regulator-max-microvolt = <3700000>;
@@ -350,86 +339,66 @@
/* LDO0 is not connected to anything */
- regulator@5 {
- reg = <5>;
- regulator-compatible = "ldo1";
+ ldo1 {
regulator-name = "vdd_ldo1,avdd_pll*";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-always-on;
};
- regulator@6 {
- reg = <6>;
- regulator-compatible = "ldo2";
+ ldo2 {
regulator-name = "vdd_ldo2,vdd_rtc";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
- regulator@7 {
- reg = <7>;
- regulator-compatible = "ldo3";
+ ldo3 {
regulator-name = "vdd_ldo3,avdd_usb*";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
- regulator@8 {
- reg = <8>;
- regulator-compatible = "ldo4";
+ ldo4 {
regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
- regulator@9 {
- reg = <9>;
- regulator-compatible = "ldo5";
+ ldo5 {
regulator-name = "vdd_ldo5,vcore_mmc";
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
regulator-always-on;
};
- regulator@10 {
- reg = <10>;
- regulator-compatible = "ldo6";
+ ldo6 {
regulator-name = "vdd_ldo6,avdd_vdac";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
- regulator@11 {
- reg = <11>;
- regulator-compatible = "ldo7";
+ ldo7 {
regulator-name = "vdd_ldo7,avdd_hdmi,vdd_fuse";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
- regulator@12 {
- reg = <12>;
- regulator-compatible = "ldo8";
+ ldo8 {
regulator-name = "vdd_ldo8,avdd_hdmi_pll";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
- regulator@13 {
- reg = <13>;
- regulator-compatible = "ldo9";
+ ldo9 {
regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx";
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
regulator-always-on;
};
- regulator@14 {
- reg = <14>;
- regulator-compatible = "ldo_rtc";
+ ldo_rtc {
regulator-name = "vdd_rtc_out,vdd_cell";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/tegra20-whistler.dts b/arch/arm/boot/dts/tegra20-whistler.dts
index c636d00..94a71c9 100644
--- a/arch/arm/boot/dts/tegra20-whistler.dts
+++ b/arch/arm/boot/dts/tegra20-whistler.dts
@@ -295,243 +295,182 @@
in20-supply = <&mbatt_reg>;
regulators {
- #address-cells = <1>;
- #size-cells = <0>;
-
- mbatt_reg: regulator@0 {
- reg = <0>;
- regulator-compatible = "mbatt";
+ mbatt_reg: mbatt {
regulator-name = "vbat_pmu";
regulator-always-on;
};
- regulator@1 {
- reg = <1>;
- regulator-compatible = "sd1";
+ sd1 {
regulator-name = "nvvdd_sv1,vdd_cpu_pmu";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
- regulator@2 {
- reg = <2>;
- regulator-compatible = "sd2";
+ sd2 {
regulator-name = "nvvdd_sv2,vdd_core";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
- nvvdd_sv3_reg: regulator@3 {
- reg = <3>;
- regulator-compatible = "sd3";
+ nvvdd_sv3_reg: sd3 {
regulator-name = "nvvdd_sv3";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
- regulator@4 {
- reg = <4>;
- regulator-compatible = "ldo1";
+ ldo1 {
regulator-name = "nvvdd_ldo1,vddio_rx_ddr,vcore_acc";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
- regulator@5 {
- reg = <5>;
- regulator-compatible = "ldo2";
+ ldo2 {
regulator-name = "nvvdd_ldo2,avdd_pll*";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-always-on;
};
- regulator@6 {
- reg = <6>;
- regulator-compatible = "ldo3";
+ ldo3 {
regulator-name = "nvvdd_ldo3,vcom_1v8b";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
- regulator@7 {
- reg = <7>;
- regulator-compatible = "ldo4";
+ ldo4 {
regulator-name = "nvvdd_ldo4,avdd_usb*";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
- regulator@8 {
- reg = <8>;
- regulator-compatible = "ldo5";
+ ldo5 {
regulator-name = "nvvdd_ldo5,vcore_mmc,avdd_lcd1,vddio_1wire";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
};
- regulator@9 {
- reg = <9>;
- regulator-compatible = "ldo6";
+ ldo6 {
regulator-name = "nvvdd_ldo6,avdd_hdmi_pll";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
- regulator@10 {
- reg = <10>;
- regulator-compatible = "ldo7";
+ ldo7 {
regulator-name = "nvvdd_ldo7,avddio_audio";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
};
- regulator@11 {
- reg = <11>;
- regulator-compatible = "ldo8";
+ ldo8 {
regulator-name = "nvvdd_ldo8,vcom_3v0,vcore_cmps";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
};
- regulator@12 {
- reg = <12>;
- regulator-compatible = "ldo9";
+ ldo9 {
regulator-name = "nvvdd_ldo9,avdd_cam*";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
- regulator@13 {
- reg = <13>;
- regulator-compatible = "ldo10";
+ ldo10 {
regulator-name = "nvvdd_ldo10,avdd_usb_ic_3v0";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-always-on;
};
- regulator@14 {
- reg = <14>;
- regulator-compatible = "ldo11";
+ ldo11 {
regulator-name = "nvvdd_ldo11,vddio_pex_clk,vcom_33,avdd_hdmi";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
- regulator@15 {
- reg = <15>;
- regulator-compatible = "ldo12";
+ ldo12 {
regulator-name = "nvvdd_ldo12,vddio_sdio";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
};
- regulator@16 {
- reg = <16>;
- regulator-compatible = "ldo13";
+ ldo13 {
regulator-name = "nvvdd_ldo13,vcore_phtn,vdd_af";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
- regulator@17 {
- reg = <17>;
- regulator-compatible = "ldo14";
+ ldo14 {
regulator-name = "nvvdd_ldo14,avdd_vdac";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
- regulator@18 {
- reg = <18>;
- regulator-compatible = "ldo15";
+ ldo15 {
regulator-name = "nvvdd_ldo15,vcore_temp,vddio_hdcp";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
- regulator@19 {
- reg = <19>;
- regulator-compatible = "ldo16";
+ ldo16 {
regulator-name = "nvvdd_ldo16,vdd_dbrtr";
regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <1300000>;
};
- regulator@20 {
- reg = <20>;
- regulator-compatible = "ldo17";
+ ldo17 {
regulator-name = "nvvdd_ldo17,vddio_mipi";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
- regulator@21 {
- reg = <21>;
- regulator-compatible = "ldo18";
+ ldo18 {
regulator-name = "nvvdd_ldo18,vddio_vi,vcore_cam*";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
- regulator@22 {
- reg = <22>;
- regulator-compatible = "ldo19";
+ ldo19 {
regulator-name = "nvvdd_ldo19,avdd_lcd2,vddio_lx";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
- regulator@23 {
- reg = <23>;
- regulator-compatible = "ldo20";
+ ldo20 {
regulator-name = "nvvdd_ldo20,vddio_ddr_1v2,vddio_hsic,vcom_1v2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
- regulator@24 {
- reg = <24>;
- regulator-compatible = "out5v";
+ out5v {
regulator-name = "usb0_vbus_reg";
};
- regulator@25 {
- reg = <25>;
- regulator-compatible = "out33v";
+ out33v {
regulator-name = "pmu_out3v3";
};
- regulator@26 {
- reg = <26>;
- regulator-compatible = "bbat";
+ bbat {
regulator-name = "pmu_bbat";
regulator-min-microvolt = <2400000>;
regulator-max-microvolt = <2400000>;
regulator-always-on;
};
- regulator@27 {
- reg = <27>;
- regulator-compatible = "sdby";
+ sdby {
regulator-name = "vdd_aon";
regulator-always-on;
};
- regulator@28 {
- reg = <28>;
- regulator-compatible = "vrtc";
+ vrtc {
regulator-name = "vrtc,pmu_vccadc";
regulator-always-on;
};
diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi
index d10c9c5..b1271a8 100644
--- a/arch/arm/boot/dts/tegra30-cardhu.dtsi
+++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi
@@ -171,56 +171,41 @@
vccio-supply = <&vdd_ac_bat_reg>;
regulators {
- #address-cells = <1>;
- #size-cells = <0>;
-
- vdd1_reg: regulator@0 {
- reg = <0>;
- regulator-compatible = "vdd1";
+ vdd1_reg: vdd1 {
regulator-name = "vddio_ddr_1v2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
- vdd2_reg: regulator@1 {
- reg = <1>;
- regulator-compatible = "vdd2";
+ vdd2_reg: vdd2 {
regulator-name = "vdd_1v5_gen";
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
};
- vddctrl_reg: regulator@2 {
- reg = <2>;
- regulator-compatible = "vddctrl";
+ vddctrl_reg: vddctrl {
regulator-name = "vdd_cpu,vdd_sys";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
- vio_reg: regulator@3 {
- reg = <3>;
- regulator-compatible = "vio";
+ vio_reg: vio {
regulator-name = "vdd_1v8_gen";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
- ldo1_reg: regulator@4 {
- reg = <4>;
- regulator-compatible = "ldo1";
+ ldo1_reg: ldo1 {
regulator-name = "vdd_pexa,vdd_pexb";
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
};
- ldo2_reg: regulator@5 {
- reg = <5>;
- regulator-compatible = "ldo2";
+ ldo2_reg: ldo2 {
regulator-name = "vdd_sata,avdd_plle";
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
@@ -228,44 +213,34 @@
/* LDO3 is not connected to anything */
- ldo4_reg: regulator@7 {
- reg = <7>;
- regulator-compatible = "ldo4";
+ ldo4_reg: ldo4 {
regulator-name = "vdd_rtc";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
- ldo5_reg: regulator@8 {
- reg = <8>;
- regulator-compatible = "ldo5";
+ ldo5_reg: ldo5 {
regulator-name = "vddio_sdmmc,avdd_vdac";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
- ldo6_reg: regulator@9 {
- reg = <9>;
- regulator-compatible = "ldo6";
+ ldo6_reg: ldo6 {
regulator-name = "avdd_dsi_csi,pwrdet_mipi";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
- ldo7_reg: regulator@10 {
- reg = <10>;
- regulator-compatible = "ldo7";
+ ldo7_reg: ldo7 {
regulator-name = "vdd_pllm,x,u,a_p_c_s";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
- ldo8_reg: regulator@11 {
- reg = <11>;
- regulator-compatible = "ldo8";
+ ldo8_reg: ldo8 {
regulator-name = "vdd_ddr_hs";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index b1497c7..df7f227 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -73,8 +73,8 @@
pinmux: pinmux {
compatible = "nvidia,tegra30-pinmux";
- reg = <0x70000868 0xd0 /* Pad control registers */
- 0x70003000 0x3e0>; /* Mux registers */
+ reg = <0x70000868 0xd4 /* Pad control registers */
+ 0x70003000 0x3e4>; /* Mux registers */
};
serial@70006000 {
diff --git a/arch/arm/boot/dts/zynq-ep107.dts b/arch/arm/boot/dts/zynq-ep107.dts
index 37ca192..574bc04 100644
--- a/arch/arm/boot/dts/zynq-ep107.dts
+++ b/arch/arm/boot/dts/zynq-ep107.dts
@@ -36,16 +36,27 @@
ranges;
intc: interrupt-controller@f8f01000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <1>;
interrupt-controller;
- compatible = "arm,gic";
- reg = <0xF8F01000 0x1000>;
- #interrupt-cells = <2>;
+ reg = <0xF8F01000 0x1000>,
+ <0xF8F00100 0x100>;
+ };
+
+ L2: cache-controller {
+ compatible = "arm,pl310-cache";
+ reg = <0xF8F02000 0x1000>;
+ arm,data-latency = <2 3 2>;
+ arm,tag-latency = <2 3 2>;
+ cache-unified;
+ cache-level = <2>;
};
uart0: uart@e0000000 {
compatible = "xlnx,xuartps";
reg = <0xE0000000 0x1000>;
- interrupts = <59 0>;
+ interrupts = <0 27 4>;
clock = <50000000>;
};
};
diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig
index 78ed575..f71302c 100644
--- a/arch/arm/configs/imx_v4_v5_defconfig
+++ b/arch/arm/configs/imx_v4_v5_defconfig
@@ -18,7 +18,9 @@
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_MXC=y
-CONFIG_ARCH_IMX_V4_V5=y
+CONFIG_ARCH_MULTI_V4T=y
+CONFIG_ARCH_MULTI_V5=y
+# CONFIG_ARCH_MULTI_V7 is not set
CONFIG_ARCH_MX1ADS=y
CONFIG_MACH_SCB9328=y
CONFIG_MACH_APF9328=y
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 66aa7a6..44f117a 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -17,6 +17,8 @@
CONFIG_MODULE_SRCVERSION_ALL=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_ARCH_MXC=y
+CONFIG_ARCH_MULTI_V6=y
+CONFIG_ARCH_MULTI_V7=y
CONFIG_MACH_MX31LILLY=y
CONFIG_MACH_MX31LITE=y
CONFIG_MACH_PCM037=y
@@ -139,6 +141,7 @@
CONFIG_SPI=y
CONFIG_SPI_IMX=y
CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_MC9S08DZ60=y
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_IMX2_WDT=y
@@ -155,6 +158,7 @@
CONFIG_SOC_CAMERA_OV2640=y
CONFIG_VIDEO_MX3=y
CONFIG_FB=y
+CONFIG_LCD_PLATFORM=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_L4F00242T03=y
diff --git a/arch/arm/configs/mvebu_defconfig b/arch/arm/configs/mvebu_defconfig
index 7bcf850..3458752 100644
--- a/arch/arm/configs/mvebu_defconfig
+++ b/arch/arm/configs/mvebu_defconfig
@@ -1,6 +1,6 @@
CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
+CONFIG_IRQ_DOMAIN_DEBUG=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
@@ -9,10 +9,12 @@
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_ARCH_MVEBU=y
-CONFIG_MACH_ARMADA_370_XP=y
+CONFIG_MACH_ARMADA_370=y
+CONFIG_MACH_ARMADA_XP=y
+# CONFIG_CACHE_L2X0 is not set
CONFIG_AEABI=y
CONFIG_HIGHMEM=y
-CONFIG_USE_OF=y
+# CONFIG_COMPACTION is not set
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_ARM_APPENDED_DTB=y
@@ -23,6 +25,8 @@
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_IOMMU_SUPPORT is not set
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
diff --git a/arch/arm/configs/versatile_defconfig b/arch/arm/configs/versatile_defconfig
index cdd4d2b..2ba9e63 100644
--- a/arch/arm/configs/versatile_defconfig
+++ b/arch/arm/configs/versatile_defconfig
@@ -1,3 +1,4 @@
+CONFIG_ARCH_VERSATILE=y
CONFIG_EXPERIMENTAL=y
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SYSVIPC=y
diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h
index 2300484..8ea02ac 100644
--- a/arch/arm/include/asm/dma-mapping.h
+++ b/arch/arm/include/asm/dma-mapping.h
@@ -211,13 +211,6 @@
extern void __init init_dma_coherent_pool_size(unsigned long size);
/*
- * This can be called during boot to increase the size of the consistent
- * DMA region above it's default value of 2MB. It must be called before the
- * memory allocator is initialised, i.e. before any core_initcall.
- */
-static inline void init_consistent_dma_size(unsigned long size) { }
-
-/*
* For SA-1111, IXP425, and ADI systems the dma-mapping functions are "magic"
* and utilize bounce buffers as needed to work around limited DMA windows.
*
diff --git a/arch/arm/include/asm/flat.h b/arch/arm/include/asm/flat.h
index 59426a4..e847d23 100644
--- a/arch/arm/include/asm/flat.h
+++ b/arch/arm/include/asm/flat.h
@@ -8,7 +8,7 @@
#define flat_argvp_envp_on_stack() 1
#define flat_old_ram_flag(flags) (flags)
#define flat_reloc_valid(reloc, size) ((reloc) <= (size))
-#define flat_get_addr_from_rp(rp, relval, flags, persistent) get_unaligned(rp)
+#define flat_get_addr_from_rp(rp, relval, flags, persistent) ((void)persistent,get_unaligned(rp))
#define flat_put_addr_at_rp(rp, val, relval) put_unaligned(val,rp)
#define flat_get_relocate_addr(rel) (rel)
#define flat_set_persistent(relval, p) 0
diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h
index 35c1ed8..42f042e 100644
--- a/arch/arm/include/asm/io.h
+++ b/arch/arm/include/asm/io.h
@@ -64,7 +64,7 @@
static inline void __raw_writew(u16 val, volatile void __iomem *addr)
{
asm volatile("strh %1, %0"
- : "+Qo" (*(volatile u16 __force *)addr)
+ : "+Q" (*(volatile u16 __force *)addr)
: "r" (val));
}
@@ -72,7 +72,7 @@
{
u16 val;
asm volatile("ldrh %1, %0"
- : "+Qo" (*(volatile u16 __force *)addr),
+ : "+Q" (*(volatile u16 __force *)addr),
"=r" (val));
return val;
}
diff --git a/arch/arm/include/asm/sched_clock.h b/arch/arm/include/asm/sched_clock.h
index 05b8e82..e3f7572 100644
--- a/arch/arm/include/asm/sched_clock.h
+++ b/arch/arm/include/asm/sched_clock.h
@@ -10,7 +10,5 @@
extern void sched_clock_postinit(void);
extern void setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate);
-extern void setup_sched_clock_needs_suspend(u32 (*read)(void), int bits,
- unsigned long rate);
#endif
diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h
index 77bd79f..7e1f760 100644
--- a/arch/arm/include/asm/uaccess.h
+++ b/arch/arm/include/asm/uaccess.h
@@ -200,8 +200,8 @@
#define USER_DS KERNEL_DS
#define segment_eq(a,b) (1)
-#define __addr_ok(addr) (1)
-#define __range_ok(addr,size) (0)
+#define __addr_ok(addr) ((void)(addr),1)
+#define __range_ok(addr,size) ((void)(addr),0)
#define get_fs() (KERNEL_DS)
static inline void set_fs(mm_segment_t fs)
diff --git a/arch/arm/include/asm/vfpmacros.h b/arch/arm/include/asm/vfpmacros.h
index 6a6f1e4..301c1db 100644
--- a/arch/arm/include/asm/vfpmacros.h
+++ b/arch/arm/include/asm/vfpmacros.h
@@ -27,9 +27,9 @@
#if __LINUX_ARM_ARCH__ <= 6
ldr \tmp, =elf_hwcap @ may not have MVFR regs
ldr \tmp, [\tmp, #0]
- tst \tmp, #HWCAP_VFPv3D16
- ldceql p11, cr0, [\base],#32*4 @ FLDMIAD \base!, {d16-d31}
- addne \base, \base, #32*4 @ step over unused register space
+ tst \tmp, #HWCAP_VFPD32
+ ldcnel p11, cr0, [\base],#32*4 @ FLDMIAD \base!, {d16-d31}
+ addeq \base, \base, #32*4 @ step over unused register space
#else
VFPFMRX \tmp, MVFR0 @ Media and VFP Feature Register 0
and \tmp, \tmp, #MVFR0_A_SIMD_MASK @ A_SIMD field
@@ -51,9 +51,9 @@
#if __LINUX_ARM_ARCH__ <= 6
ldr \tmp, =elf_hwcap @ may not have MVFR regs
ldr \tmp, [\tmp, #0]
- tst \tmp, #HWCAP_VFPv3D16
- stceql p11, cr0, [\base],#32*4 @ FSTMIAD \base!, {d16-d31}
- addne \base, \base, #32*4 @ step over unused register space
+ tst \tmp, #HWCAP_VFPD32
+ stcnel p11, cr0, [\base],#32*4 @ FSTMIAD \base!, {d16-d31}
+ addeq \base, \base, #32*4 @ step over unused register space
#else
VFPFMRX \tmp, MVFR0 @ Media and VFP Feature Register 0
and \tmp, \tmp, #MVFR0_A_SIMD_MASK @ A_SIMD field
diff --git a/arch/arm/include/asm/xen/interface.h b/arch/arm/include/asm/xen/interface.h
index ae05e56..5000397 100644
--- a/arch/arm/include/asm/xen/interface.h
+++ b/arch/arm/include/asm/xen/interface.h
@@ -29,16 +29,22 @@
#ifndef __ASSEMBLY__
/* Explicitly size integers that represent pfns in the interface with
- * Xen so that we can have one ABI that works for 32 and 64 bit guests. */
+ * Xen so that we can have one ABI that works for 32 and 64 bit guests.
+ * Note that this means that the xen_pfn_t type may be capable of
+ * representing pfn's which the guest cannot represent in its own pfn
+ * type. However since pfn space is controlled by the guest this is
+ * fine since it simply wouldn't be able to create any sure pfns in
+ * the first place.
+ */
typedef uint64_t xen_pfn_t;
+#define PRI_xen_pfn "llx"
typedef uint64_t xen_ulong_t;
+#define PRI_xen_ulong "llx"
/* Guest handles for primitive C types. */
__DEFINE_GUEST_HANDLE(uchar, unsigned char);
__DEFINE_GUEST_HANDLE(uint, unsigned int);
-__DEFINE_GUEST_HANDLE(ulong, unsigned long);
DEFINE_GUEST_HANDLE(char);
DEFINE_GUEST_HANDLE(int);
-DEFINE_GUEST_HANDLE(long);
DEFINE_GUEST_HANDLE(void);
DEFINE_GUEST_HANDLE(uint64_t);
DEFINE_GUEST_HANDLE(uint32_t);
diff --git a/arch/arm/include/asm/xen/page.h b/arch/arm/include/asm/xen/page.h
index 1742023..c6b9096 100644
--- a/arch/arm/include/asm/xen/page.h
+++ b/arch/arm/include/asm/xen/page.h
@@ -10,7 +10,7 @@
#include <xen/interface/grant_table.h>
#define pfn_to_mfn(pfn) (pfn)
-#define phys_to_machine_mapping_valid (1)
+#define phys_to_machine_mapping_valid(pfn) (1)
#define mfn_to_pfn(mfn) (mfn)
#define mfn_to_virt(m) (__va(mfn_to_pfn(m) << PAGE_SHIFT))
@@ -30,6 +30,8 @@
#define XMADDR(x) ((xmaddr_t) { .maddr = (x) })
#define XPADDR(x) ((xpaddr_t) { .paddr = (x) })
+#define INVALID_P2M_ENTRY (~0UL)
+
static inline xmaddr_t phys_to_machine(xpaddr_t phys)
{
unsigned offset = phys.paddr & ~PAGE_MASK;
@@ -74,9 +76,14 @@
return 0;
}
+static inline bool __set_phys_to_machine(unsigned long pfn, unsigned long mfn)
+{
+ BUG_ON(pfn != mfn && mfn != INVALID_P2M_ENTRY);
+ return true;
+}
+
static inline bool set_phys_to_machine(unsigned long pfn, unsigned long mfn)
{
- BUG();
- return false;
+ return __set_phys_to_machine(pfn, mfn);
}
#endif /* _ASM_ARM_XEN_PAGE_H */
diff --git a/arch/arm/include/debug/8250_32.S b/arch/arm/include/debug/8250_32.S
new file mode 100644
index 0000000..8db01ee
--- /dev/null
+++ b/arch/arm/include/debug/8250_32.S
@@ -0,0 +1,27 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Derived from arch/arm/mach-davinci/include/mach/debug-macro.S to use 32-bit
+ * accesses to the 8250.
+ */
+
+#include <linux/serial_reg.h>
+
+ .macro senduart,rd,rx
+ str \rd, [\rx, #UART_TX << UART_SHIFT]
+ .endm
+
+ .macro busyuart,rd,rx
+1002: ldr \rd, [\rx, #UART_LSR << UART_SHIFT]
+ and \rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE
+ teq \rd, #UART_LSR_TEMT | UART_LSR_THRE
+ bne 1002b
+ .endm
+
+ /* The UART's don't have any flow control IO's wired up. */
+ .macro waituart,rd,rx
+ .endm
diff --git a/arch/arm/include/debug/imx.S b/arch/arm/include/debug/imx.S
new file mode 100644
index 0000000..0b65d79
--- /dev/null
+++ b/arch/arm/include/debug/imx.S
@@ -0,0 +1,62 @@
+/* arch/arm/mach-imx/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ * Copyright (C) 1994-1999 Russell King
+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#ifdef CONFIG_DEBUG_IMX1_UART
+#define UART_PADDR 0x00206000
+#elif defined (CONFIG_DEBUG_IMX25_UART)
+#define UART_PADDR 0x43f90000
+#elif defined (CONFIG_DEBUG_IMX21_IMX27_UART)
+#define UART_PADDR 0x1000a000
+#elif defined (CONFIG_DEBUG_IMX31_IMX35_UART)
+#define UART_PADDR 0x43f90000
+#elif defined (CONFIG_DEBUG_IMX51_UART)
+#define UART_PADDR 0x73fbc000
+#elif defined (CONFIG_DEBUG_IMX50_IMX53_UART)
+#define UART_PADDR 0x53fbc000
+#elif defined (CONFIG_DEBUG_IMX6Q_UART2)
+#define UART_PADDR 0x021e8000
+#elif defined (CONFIG_DEBUG_IMX6Q_UART4)
+#define UART_PADDR 0x021f0000
+#endif
+
+/*
+ * FIXME: This is a copy of IMX_IO_P2V in hardware.h, and needs to
+ * stay sync with that. It's hard to maintain, and should be fixed
+ * globally for multi-platform build to use a fixed virtual address
+ * for low-level debug uart port across platforms.
+ */
+#define IMX_IO_P2V(x) ( \
+ (((x) & 0x80000000) >> 7) | \
+ (0xf4000000 + \
+ (((x) & 0x50000000) >> 6) + \
+ (((x) & 0x0b000000) >> 4) + \
+ (((x) & 0x000fffff))))
+
+#define UART_VADDR IMX_IO_P2V(UART_PADDR)
+
+ .macro addruart, rp, rv, tmp
+ ldr \rp, =UART_PADDR @ physical
+ ldr \rv, =UART_VADDR @ virtual
+ .endm
+
+ .macro senduart,rd,rx
+ str \rd, [\rx, #0x40] @ TXDATA
+ .endm
+
+ .macro waituart,rd,rx
+ .endm
+
+ .macro busyuart,rd,rx
+1002: ldr \rd, [\rx, #0x98] @ SR2
+ tst \rd, #1 << 3 @ TXDC
+ beq 1002b @ wait until transmit done
+ .endm
diff --git a/arch/arm/include/debug/picoxcell.S b/arch/arm/include/debug/picoxcell.S
index 7419deb..bc1f07c4 100644
--- a/arch/arm/include/debug/picoxcell.S
+++ b/arch/arm/include/debug/picoxcell.S
@@ -5,10 +5,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
- * Derived from arch/arm/mach-davinci/include/mach/debug-macro.S to use 32-bit
- * accesses to the 8250.
*/
-#include <linux/serial_reg.h>
#define UART_SHIFT 2
#define PICOXCELL_UART1_BASE 0x80230000
@@ -19,17 +16,4 @@
ldr \rp, =PICOXCELL_UART1_BASE
.endm
- .macro senduart,rd,rx
- str \rd, [\rx, #UART_TX << UART_SHIFT]
- .endm
-
- .macro busyuart,rd,rx
-1002: ldr \rd, [\rx, #UART_LSR << UART_SHIFT]
- and \rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE
- teq \rd, #UART_LSR_TEMT | UART_LSR_THRE
- bne 1002b
- .endm
-
- /* The UART's don't have any flow control IO's wired up. */
- .macro waituart,rd,rx
- .endm
+#include "8250_32.S"
diff --git a/arch/arm/include/debug/socfpga.S b/arch/arm/include/debug/socfpga.S
index d6f26d2..966b2f9 100644
--- a/arch/arm/include/debug/socfpga.S
+++ b/arch/arm/include/debug/socfpga.S
@@ -7,6 +7,9 @@
* published by the Free Software Foundation.
*/
+#define UART_SHIFT 2
+#define DEBUG_LL_UART_OFFSET 0x00002000
+
.macro addruart, rp, rv, tmp
mov \rp, #DEBUG_LL_UART_OFFSET
orr \rp, \rp, #0x00c00000
@@ -14,3 +17,5 @@
orr \rp, \rp, #0xff000000 @ physical base
.endm
+#include "8250_32.S"
+
diff --git a/arch/arm/include/uapi/asm/hwcap.h b/arch/arm/include/uapi/asm/hwcap.h
index f254f65..3688fd1 100644
--- a/arch/arm/include/uapi/asm/hwcap.h
+++ b/arch/arm/include/uapi/asm/hwcap.h
@@ -18,11 +18,12 @@
#define HWCAP_THUMBEE (1 << 11)
#define HWCAP_NEON (1 << 12)
#define HWCAP_VFPv3 (1 << 13)
-#define HWCAP_VFPv3D16 (1 << 14)
+#define HWCAP_VFPv3D16 (1 << 14) /* also set for VFPv4-D16 */
#define HWCAP_TLS (1 << 15)
#define HWCAP_VFPv4 (1 << 16)
#define HWCAP_IDIVA (1 << 17)
#define HWCAP_IDIVT (1 << 18)
+#define HWCAP_VFPD32 (1 << 19) /* set if VFP has 32 regs (not 16) */
#define HWCAP_IDIV (HWCAP_IDIVA | HWCAP_IDIVT)
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index 16cedb4..8961650 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -34,6 +34,7 @@
#include <linux/list.h>
#include <linux/kallsyms.h>
#include <linux/proc_fs.h>
+#include <linux/export.h>
#include <asm/exception.h>
#include <asm/mach/arch.h>
@@ -109,6 +110,7 @@
/* Order is clear bits in "clr" then set bits in "set" */
irq_modify_status(irq, clr, set & ~clr);
}
+EXPORT_SYMBOL_GPL(set_irq_flags);
void __init init_IRQ(void)
{
diff --git a/arch/arm/kernel/kprobes-test-arm.c b/arch/arm/kernel/kprobes-test-arm.c
index 38c1a3b..8393129 100644
--- a/arch/arm/kernel/kprobes-test-arm.c
+++ b/arch/arm/kernel/kprobes-test-arm.c
@@ -366,7 +366,9 @@
TEST_UNSUPPORTED(".word 0xe04f0392 @ umaal r0, pc, r2, r3")
TEST_UNSUPPORTED(".word 0xe0500090 @ undef")
TEST_UNSUPPORTED(".word 0xe05fff9f @ undef")
+#endif
+#if __LINUX_ARM_ARCH__ >= 7
TEST_RRR( "mls r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"")
TEST_RRR( "mlshi r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
TEST_RR( "mls lr, r",1, VAL2,", r",2, VAL3,", r13")
@@ -456,6 +458,8 @@
TEST_UNSUPPORTED(".word 0xe1700090") /* Unallocated space */
#if __LINUX_ARM_ARCH__ >= 6
TEST_UNSUPPORTED("ldrex r2, [sp]")
+#endif
+#if (__LINUX_ARM_ARCH__ >= 7) || defined(CONFIG_CPU_32v6K)
TEST_UNSUPPORTED("strexd r0, r2, r3, [sp]")
TEST_UNSUPPORTED("ldrexd r2, r3, [sp]")
TEST_UNSUPPORTED("strexb r0, r2, [sp]")
diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c
index e29c333..8ef8c93 100644
--- a/arch/arm/kernel/machine_kexec.c
+++ b/arch/arm/kernel/machine_kexec.c
@@ -45,10 +45,9 @@
for (i = 0; i < image->nr_segments; i++) {
current_segment = &image->segment[i];
- err = memblock_is_region_memory(current_segment->mem,
- current_segment->memsz);
- if (err)
- return - EINVAL;
+ if (!memblock_is_region_memory(current_segment->mem,
+ current_segment->memsz))
+ return -EINVAL;
err = get_user(header, (__be32*)current_segment->buf);
if (err)
diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c
index 93971b1..53c0304 100644
--- a/arch/arm/kernel/perf_event.c
+++ b/arch/arm/kernel/perf_event.c
@@ -96,6 +96,10 @@
s64 period = hwc->sample_period;
int ret = 0;
+ /* The period may have been changed by PERF_EVENT_IOC_PERIOD */
+ if (unlikely(period != hwc->last_period))
+ left = period - (hwc->last_period - left);
+
if (unlikely(left <= -period)) {
left = period;
local64_set(&hwc->period_left, left);
diff --git a/arch/arm/kernel/sched_clock.c b/arch/arm/kernel/sched_clock.c
index e21bac2..fc6692e 100644
--- a/arch/arm/kernel/sched_clock.c
+++ b/arch/arm/kernel/sched_clock.c
@@ -107,13 +107,6 @@
update_sched_clock();
}
-void __init setup_sched_clock_needs_suspend(u32 (*read)(void), int bits,
- unsigned long rate)
-{
- setup_sched_clock(read, bits, rate);
- cd.needs_suspend = true;
-}
-
void __init setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate)
{
unsigned long r, w;
@@ -189,18 +182,15 @@
static int sched_clock_suspend(void)
{
sched_clock_poll(sched_clock_timer.data);
- if (cd.needs_suspend)
- cd.suspended = true;
+ cd.suspended = true;
return 0;
}
static void sched_clock_resume(void)
{
- if (cd.needs_suspend) {
- cd.epoch_cyc = read_sched_clock();
- cd.epoch_cyc_copy = cd.epoch_cyc;
- cd.suspended = false;
- }
+ cd.epoch_cyc = read_sched_clock();
+ cd.epoch_cyc_copy = cd.epoch_cyc;
+ cd.suspended = false;
}
static struct syscore_ops sched_clock_ops = {
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 8e20754d..fbc8b26 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -294,18 +294,24 @@
asmlinkage void __cpuinit secondary_start_kernel(void)
{
struct mm_struct *mm = &init_mm;
- unsigned int cpu = smp_processor_id();
+ unsigned int cpu;
+
+ /*
+ * The identity mapping is uncached (strongly ordered), so
+ * switch away from it before attempting any exclusive accesses.
+ */
+ cpu_switch_mm(mm->pgd, mm);
+ enter_lazy_tlb(mm, current);
+ local_flush_tlb_all();
/*
* All kernel threads share the same mm context; grab a
* reference and switch to it.
*/
+ cpu = smp_processor_id();
atomic_inc(&mm->mm_count);
current->active_mm = mm;
cpumask_set_cpu(cpu, mm_cpumask(mm));
- cpu_switch_mm(mm->pgd, mm);
- enter_lazy_tlb(mm, current);
- local_flush_tlb_all();
printk("CPU%u: Booted secondary processor\n", cpu);
diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c
index e1f9069..b22d700 100644
--- a/arch/arm/kernel/smp_twd.c
+++ b/arch/arm/kernel/smp_twd.c
@@ -42,10 +42,10 @@
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
- /* timer load already set up */
ctrl = TWD_TIMER_CONTROL_ENABLE | TWD_TIMER_CONTROL_IT_ENABLE
| TWD_TIMER_CONTROL_PERIODIC;
- __raw_writel(twd_timer_rate / HZ, twd_base + TWD_TIMER_LOAD);
+ __raw_writel(DIV_ROUND_CLOSEST(twd_timer_rate, HZ),
+ twd_base + TWD_TIMER_LOAD);
break;
case CLOCK_EVT_MODE_ONESHOT:
/* period set, and timer enabled in 'next_event' hook */
diff --git a/arch/arm/lib/delay.c b/arch/arm/lib/delay.c
index 9d0a300..0dc5385 100644
--- a/arch/arm/lib/delay.c
+++ b/arch/arm/lib/delay.c
@@ -45,6 +45,7 @@
*timer_val = delay_timer->read_current_timer();
return 0;
}
+EXPORT_SYMBOL_GPL(read_current_timer);
static void __timer_delay(unsigned long cycles)
{
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index b142071..0436242 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -21,19 +21,13 @@
bool
select CPU_ARM926T
select GENERIC_CLOCKEVENTS
+ select MULTI_IRQ_HANDLER
+ select SPARSE_IRQ
menu "Atmel AT91 System-on-Chip"
comment "Atmel AT91 Processor"
-config SOC_AT91SAM9
- bool
- select AT91_SAM9_SMC
- select AT91_SAM9_TIME
- select CPU_ARM926T
- select MULTI_IRQ_HANDLER
- select SPARSE_IRQ
-
config SOC_AT91RM9200
bool "AT91RM9200"
select CPU_ARM920T
diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c
index b4f0565..5269825 100644
--- a/arch/arm/mach-at91/at91rm9200.c
+++ b/arch/arm/mach-at91/at91rm9200.c
@@ -187,7 +187,7 @@
CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk),
- CLKDEV_CON_DEV_ID(NULL, "i2c-at91rm9200", &twi_clk),
+ CLKDEV_CON_DEV_ID(NULL, "i2c-at91rm9200.0", &twi_clk),
/* fake hclk clock */
CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk),
CLKDEV_CON_ID("pioA", &pioA_clk),
diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index a563189..3cee0e6 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -68,7 +68,7 @@
/* Enable overcurrent notification */
for (i = 0; i < data->ports; i++) {
- if (data->overcurrent_pin[i])
+ if (gpio_is_valid(data->overcurrent_pin[i]))
at91_set_gpio_input(data->overcurrent_pin[i], 1);
}
@@ -479,7 +479,7 @@
static struct platform_device at91rm9200_twi_device = {
.name = "i2c-gpio",
- .id = -1,
+ .id = 0,
.dev.platform_data = &pdata,
};
@@ -512,7 +512,7 @@
static struct platform_device at91rm9200_twi_device = {
.name = "i2c-at91rm9200",
- .id = -1,
+ .id = 0,
.resource = twi_resources,
.num_resources = ARRAY_SIZE(twi_resources),
};
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index ad29f93..f820261 100644
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -211,8 +211,8 @@
CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.1", &tc4_clk),
CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.1", &tc5_clk),
CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc_clk),
- CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9260", &twi_clk),
- CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g20", &twi_clk),
+ CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9260.0", &twi_clk),
+ CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g20.0", &twi_clk),
/* more usart lookup table for DT entries */
CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck),
CLKDEV_CON_DEV_ID("usart", "fffb0000.serial", &usart0_clk),
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index a76b8684..414bd85 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -72,7 +72,7 @@
/* Enable overcurrent notification */
for (i = 0; i < data->ports; i++) {
- if (data->overcurrent_pin[i])
+ if (gpio_is_valid(data->overcurrent_pin[i]))
at91_set_gpio_input(data->overcurrent_pin[i], 1);
}
@@ -389,7 +389,7 @@
static struct platform_device at91sam9260_twi_device = {
.name = "i2c-gpio",
- .id = -1,
+ .id = 0,
.dev.platform_data = &pdata,
};
@@ -421,7 +421,7 @@
};
static struct platform_device at91sam9260_twi_device = {
- .id = -1,
+ .id = 0,
.resource = twi_resources,
.num_resources = ARRAY_SIZE(twi_resources),
};
diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c
index 8d999eb..04295c0 100644
--- a/arch/arm/mach-at91/at91sam9261.c
+++ b/arch/arm/mach-at91/at91sam9261.c
@@ -178,8 +178,8 @@
CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk),
CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &hck0),
- CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9261", &twi_clk),
- CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g10", &twi_clk),
+ CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9261.0", &twi_clk),
+ CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g10.0", &twi_clk),
CLKDEV_CON_ID("pioA", &pioA_clk),
CLKDEV_CON_ID("pioB", &pioB_clk),
CLKDEV_CON_ID("pioC", &pioC_clk),
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index 9752f17..cd604aa 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -72,7 +72,7 @@
/* Enable overcurrent notification */
for (i = 0; i < data->ports; i++) {
- if (data->overcurrent_pin[i])
+ if (gpio_is_valid(data->overcurrent_pin[i]))
at91_set_gpio_input(data->overcurrent_pin[i], 1);
}
@@ -285,7 +285,7 @@
static struct platform_device at91sam9261_twi_device = {
.name = "i2c-gpio",
- .id = -1,
+ .id = 0,
.dev.platform_data = &pdata,
};
@@ -317,7 +317,7 @@
};
static struct platform_device at91sam9261_twi_device = {
- .id = -1,
+ .id = 0,
.resource = twi_resources,
.num_resources = ARRAY_SIZE(twi_resources),
};
diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
index 6a01d03..d6f9c23 100644
--- a/arch/arm/mach-at91/at91sam9263.c
+++ b/arch/arm/mach-at91/at91sam9263.c
@@ -193,7 +193,7 @@
CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk),
- CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9260", &twi_clk),
+ CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9260.0", &twi_clk),
/* fake hclk clock */
CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk),
CLKDEV_CON_ID("pioA", &pioA_clk),
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index 8dde220..9c61e59a 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -78,7 +78,7 @@
/* Enable overcurrent notification */
for (i = 0; i < data->ports; i++) {
- if (data->overcurrent_pin[i])
+ if (gpio_is_valid(data->overcurrent_pin[i]))
at91_set_gpio_input(data->overcurrent_pin[i], 1);
}
@@ -567,7 +567,7 @@
static struct platform_device at91sam9263_twi_device = {
.name = "i2c-gpio",
- .id = -1,
+ .id = 0,
.dev.platform_data = &pdata,
};
@@ -600,7 +600,7 @@
static struct platform_device at91sam9263_twi_device = {
.name = "i2c-at91sam9260",
- .id = -1,
+ .id = 0,
.resource = twi_resources,
.num_resources = ARRAY_SIZE(twi_resources),
};
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
index 84af1b5..b7ae124 100644
--- a/arch/arm/mach-at91/at91sam9g45.c
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -343,7 +343,6 @@
static void __init at91sam9g45_map_io(void)
{
at91_init_sram(0, AT91SAM9G45_SRAM_BASE, AT91SAM9G45_SRAM_SIZE);
- init_consistent_dma_size(SZ_4M);
}
static void __init at91sam9g45_ioremap_registers(void)
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index b159607..fcd233c 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -1841,8 +1841,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9G45_ID_AESTDESSHA,
- .end = AT91SAM9G45_ID_AESTDESSHA,
+ .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA,
+ .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA,
.flags = IORESOURCE_IRQ,
},
};
@@ -1874,8 +1874,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9G45_ID_AESTDESSHA,
- .end = AT91SAM9G45_ID_AESTDESSHA,
+ .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA,
+ .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA,
.flags = IORESOURCE_IRQ,
},
};
@@ -1910,8 +1910,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = AT91SAM9G45_ID_AESTDESSHA,
- .end = AT91SAM9G45_ID_AESTDESSHA,
+ .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA,
+ .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA,
.flags = IORESOURCE_IRQ,
},
};
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index d6ca054..5047bdc 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -314,7 +314,7 @@
static struct platform_device at91sam9rl_twi_device = {
.name = "i2c-gpio",
- .id = -1,
+ .id = 0,
.dev.platform_data = &pdata,
};
@@ -347,7 +347,7 @@
static struct platform_device at91sam9rl_twi_device = {
.name = "i2c-at91sam9g20",
- .id = -1,
+ .id = 0,
.resource = twi_resources,
.num_resources = ARRAY_SIZE(twi_resources),
};
diff --git a/arch/arm/mach-at91/at91x40.c b/arch/arm/mach-at91/at91x40.c
index 6bd7300..bb7f544 100644
--- a/arch/arm/mach-at91/at91x40.c
+++ b/arch/arm/mach-at91/at91x40.c
@@ -88,6 +88,6 @@
if (!priority)
priority = at91x40_default_irq_priority;
- at91_aic_init(priority);
+ at91_aic_init(priority, at91_extern_irq);
}
diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c
index 9cda3fd..6960778 100644
--- a/arch/arm/mach-at91/board-neocore926.c
+++ b/arch/arm/mach-at91/board-neocore926.c
@@ -129,7 +129,7 @@
.max_speed_hz = 125000 * 16,
.bus_num = 0,
.platform_data = &ads_info,
- .irq = AT91SAM9263_ID_IRQ1,
+ .irq = NR_IRQS_LEGACY + AT91SAM9263_ID_IRQ1,
},
#endif
};
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index 27b3af1..a9167dd 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -309,7 +309,7 @@
.max_speed_hz = 125000 * 26, /* (max sample rate @ 3V) * (cmd + data + overhead) */
.bus_num = 0,
.platform_data = &ads_info,
- .irq = AT91SAM9261_ID_IRQ0,
+ .irq = NR_IRQS_LEGACY + AT91SAM9261_ID_IRQ0,
.controller_data = (void *) AT91_PIN_PA28, /* CS pin */
},
#endif
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index 073e174..b87dbe2 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -132,7 +132,7 @@
.max_speed_hz = 125000 * 26, /* (max sample rate @ 3V) * (cmd + data + overhead) */
.bus_num = 0,
.platform_data = &ads_info,
- .irq = AT91SAM9263_ID_IRQ1,
+ .irq = NR_IRQS_LEGACY + AT91SAM9263_ID_IRQ1,
},
#endif
};
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
index f496506..b62f560e 100644
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -26,7 +26,8 @@
extern void __init at91_init_irq_default(void);
extern void __init at91_init_interrupts(unsigned int priority[]);
extern void __init at91x40_init_interrupts(unsigned int priority[]);
-extern void __init at91_aic_init(unsigned int priority[]);
+extern void __init at91_aic_init(unsigned int priority[],
+ unsigned int ext_irq_mask);
extern int __init at91_aic_of_init(struct device_node *node,
struct device_node *parent);
extern int __init at91_aic5_of_init(struct device_node *node,
diff --git a/arch/arm/mach-at91/include/mach/atmel-mci.h b/arch/arm/mach-at91/include/mach/atmel-mci.h
index cd580a1..3069e41 100644
--- a/arch/arm/mach-at91/include/mach/atmel-mci.h
+++ b/arch/arm/mach-at91/include/mach/atmel-mci.h
@@ -14,11 +14,4 @@
#define slave_data_ptr(s) (&(s)->sdata)
#define find_slave_dev(s) ((s)->sdata.dma_dev)
-#define setup_dma_addr(s, t, r) do { \
- if (s) { \
- (s)->sdata.tx_reg = (t); \
- (s)->sdata.rx_reg = (r); \
- } \
-} while (0)
-
#endif /* __MACH_ATMEL_MCI_H */
diff --git a/arch/arm/mach-at91/irq.c b/arch/arm/mach-at91/irq.c
index 1e02c0e..febc2ee 100644
--- a/arch/arm/mach-at91/irq.c
+++ b/arch/arm/mach-at91/irq.c
@@ -502,14 +502,19 @@
/*
* Initialize the AIC interrupt controller.
*/
-void __init at91_aic_init(unsigned int *priority)
+void __init at91_aic_init(unsigned int *priority, unsigned int ext_irq_mask)
{
unsigned int i;
int irq_base;
- if (at91_aic_pm_init())
+ at91_extern_irq = kzalloc(BITS_TO_LONGS(n_irqs)
+ * sizeof(*at91_extern_irq), GFP_KERNEL);
+
+ if (at91_aic_pm_init() || at91_extern_irq == NULL)
panic("Unable to allocate bit maps\n");
+ *at91_extern_irq = ext_irq_mask;
+
at91_aic_base = ioremap(AT91_AIC, 512);
if (!at91_aic_base)
panic("Unable to ioremap AIC registers\n");
diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c
index da9881b..0b32c81 100644
--- a/arch/arm/mach-at91/setup.c
+++ b/arch/arm/mach-at91/setup.c
@@ -47,7 +47,7 @@
void __init at91_init_interrupts(unsigned int *priority)
{
/* Initialize the AIC interrupt controller */
- at91_aic_init(priority);
+ at91_aic_init(priority, at91_extern_irq);
/* Enable GPIO interrupts */
at91_gpio_irq_setup();
@@ -151,7 +151,7 @@
}
/* at91sam9g10 */
- if ((cidr & ~AT91_CIDR_EXT) == ARCH_ID_AT91SAM9G10) {
+ if ((socid & ~AT91_CIDR_EXT) == ARCH_ID_AT91SAM9G10) {
at91_soc_initdata.type = AT91_SOC_SAM9G10;
at91_boot_soc = at91sam9261_soc;
}
diff --git a/arch/arm/mach-bcm2835/Makefile.boot b/arch/arm/mach-bcm2835/Makefile.boot
index 2d30e17..b327175 100644
--- a/arch/arm/mach-bcm2835/Makefile.boot
+++ b/arch/arm/mach-bcm2835/Makefile.boot
@@ -1,3 +1 @@
- zreladdr-y := 0x00008000
-params_phys-y := 0x00000100
-initrd_phys-y := 0x00800000
+zreladdr-y := 0x00008000
diff --git a/arch/arm/mach-bcm2835/bcm2835.c b/arch/arm/mach-bcm2835/bcm2835.c
index f6fea49..53e3842 100644
--- a/arch/arm/mach-bcm2835/bcm2835.c
+++ b/arch/arm/mach-bcm2835/bcm2835.c
@@ -30,12 +30,12 @@
.type = MT_DEVICE
};
-void __init bcm2835_map_io(void)
+static void __init bcm2835_map_io(void)
{
iotable_init(&io_map, 1);
}
-void __init bcm2835_init(void)
+static void __init bcm2835_init(void)
{
int ret;
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index 1dbf85b..9211e88 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -194,7 +194,7 @@
while (ngpio--) {
leds->gpio = gpio++;
leds++;
- };
+ }
evm_led_dev = platform_device_alloc("leds-gpio", 0);
platform_device_add_data(evm_led_dev, &evm_led_data,
diff --git a/arch/arm/mach-davinci/common.c b/arch/arm/mach-davinci/common.c
index 64b0f65..a794f6d 100644
--- a/arch/arm/mach-davinci/common.c
+++ b/arch/arm/mach-davinci/common.c
@@ -87,8 +87,6 @@
iotable_init(davinci_soc_info.io_desc,
davinci_soc_info.io_desc_num);
- init_consistent_dma_size(14 << 20);
-
/*
* Normally devicemaps_init() would flush caches and tlb after
* mdesc->map_io(), but we must also do it here because of the CPU
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index cd0c8b1..14e9947 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -713,8 +713,7 @@
break;
case VPBE_ENC_CUSTOM_TIMINGS:
if (pclock <= 27000000) {
- v |= DM644X_VPSS_MUXSEL_PLL2_MODE |
- DM644X_VPSS_DACCLKEN;
+ v |= DM644X_VPSS_DACCLKEN;
writel(v, DAVINCI_SYSMOD_VIRT(SYSMOD_VPSS_CLKCTL));
} else {
/*
diff --git a/arch/arm/mach-davinci/usb.c b/arch/arm/mach-davinci/usb.c
index f77b953..34509ff 100644
--- a/arch/arm/mach-davinci/usb.c
+++ b/arch/arm/mach-davinci/usb.c
@@ -42,14 +42,8 @@
};
static struct musb_hdrc_platform_data usb_data = {
-#if defined(CONFIG_USB_MUSB_OTG)
/* OTG requires a Mini-AB connector */
.mode = MUSB_OTG,
-#elif defined(CONFIG_USB_MUSB_PERIPHERAL)
- .mode = MUSB_PERIPHERAL,
-#elif defined(CONFIG_USB_MUSB_HOST)
- .mode = MUSB_HOST,
-#endif
.clock = "usb",
.config = &musb_config,
};
diff --git a/arch/arm/mach-exynos/clock-exynos4.c b/arch/arm/mach-exynos/clock-exynos4.c
index 6a45c9a..fa8a134 100644
--- a/arch/arm/mach-exynos/clock-exynos4.c
+++ b/arch/arm/mach-exynos/clock-exynos4.c
@@ -613,11 +613,6 @@
.ctrlbit = (1 << 18),
}, {
.name = "iis",
- .devname = "samsung-i2s.0",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 19),
- }, {
- .name = "iis",
.devname = "samsung-i2s.1",
.enable = exynos4_clk_ip_peril_ctrl,
.ctrlbit = (1 << 20),
diff --git a/arch/arm/mach-exynos/clock-exynos5.c b/arch/arm/mach-exynos/clock-exynos5.c
index c44ca1e..4478757 100644
--- a/arch/arm/mach-exynos/clock-exynos5.c
+++ b/arch/arm/mach-exynos/clock-exynos5.c
@@ -292,7 +292,7 @@
.nr_sources = ARRAY_SIZE(exynos5_clk_src_mpll_list),
};
-struct clksrc_clk exynos5_clk_mout_mpll = {
+static struct clksrc_clk exynos5_clk_mout_mpll = {
.clk = {
.name = "mout_mpll",
},
@@ -467,12 +467,12 @@
/* Core list of CMU_TOP side */
-struct clk *exynos5_clkset_aclk_top_list[] = {
+static struct clk *exynos5_clkset_aclk_top_list[] = {
[0] = &exynos5_clk_mout_mpll_user.clk,
[1] = &exynos5_clk_mout_bpll_user.clk,
};
-struct clksrc_sources exynos5_clkset_aclk = {
+static struct clksrc_sources exynos5_clkset_aclk = {
.sources = exynos5_clkset_aclk_top_list,
.nr_sources = ARRAY_SIZE(exynos5_clkset_aclk_top_list),
};
@@ -486,12 +486,12 @@
.reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 24, .size = 3 },
};
-struct clk *exynos5_clkset_aclk_333_166_list[] = {
+static struct clk *exynos5_clkset_aclk_333_166_list[] = {
[0] = &exynos5_clk_mout_cpll.clk,
[1] = &exynos5_clk_mout_mpll_user.clk,
};
-struct clksrc_sources exynos5_clkset_aclk_333_166 = {
+static struct clksrc_sources exynos5_clkset_aclk_333_166 = {
.sources = exynos5_clkset_aclk_333_166_list,
.nr_sources = ARRAY_SIZE(exynos5_clkset_aclk_333_166_list),
};
@@ -966,7 +966,7 @@
.ctrlbit = (1 << 0),
};
-struct clk *exynos5_clkset_group_list[] = {
+static struct clk *exynos5_clkset_group_list[] = {
[0] = &clk_ext_xtal_mux,
[1] = NULL,
[2] = &exynos5_clk_sclk_hdmi24m,
@@ -979,7 +979,7 @@
[9] = &exynos5_clk_mout_cpll.clk,
};
-struct clksrc_sources exynos5_clkset_group = {
+static struct clksrc_sources exynos5_clkset_group = {
.sources = exynos5_clkset_group_list,
.nr_sources = ARRAY_SIZE(exynos5_clkset_group_list),
};
@@ -1195,7 +1195,7 @@
.reg_div = { .reg = EXYNOS5_CLKDIV_PERIC2, .shift = 8, .size = 8 },
};
-struct clksrc_clk exynos5_clk_sclk_fimd1 = {
+static struct clksrc_clk exynos5_clk_sclk_fimd1 = {
.clk = {
.name = "sclk_fimd",
.devname = "exynos5-fb.1",
@@ -1476,7 +1476,7 @@
#define exynos5_clock_resume NULL
#endif
-struct syscore_ops exynos5_clock_syscore_ops = {
+static struct syscore_ops exynos5_clock_syscore_ops = {
.suspend = exynos5_clock_suspend,
.resume = exynos5_clock_resume,
};
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index 715b690..0dbee7f 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -47,6 +47,7 @@
#include <plat/fimc-core.h>
#include <plat/iic-core.h>
#include <plat/tv-core.h>
+#include <plat/spi-core.h>
#include <plat/regs-serial.h>
#include "common.h"
@@ -62,7 +63,7 @@
static void exynos5_map_io(void);
static void exynos4_init_clocks(int xtal);
static void exynos5_init_clocks(int xtal);
-static void exynos_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+static void exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no);
static int exynos_init(void);
static struct cpu_table cpu_ids[] __initdata = {
@@ -71,7 +72,7 @@
.idmask = EXYNOS4_CPU_MASK,
.map_io = exynos4_map_io,
.init_clocks = exynos4_init_clocks,
- .init_uarts = exynos_init_uarts,
+ .init_uarts = exynos4_init_uarts,
.init = exynos_init,
.name = name_exynos4210,
}, {
@@ -79,7 +80,7 @@
.idmask = EXYNOS4_CPU_MASK,
.map_io = exynos4_map_io,
.init_clocks = exynos4_init_clocks,
- .init_uarts = exynos_init_uarts,
+ .init_uarts = exynos4_init_uarts,
.init = exynos_init,
.name = name_exynos4212,
}, {
@@ -87,7 +88,7 @@
.idmask = EXYNOS4_CPU_MASK,
.map_io = exynos4_map_io,
.init_clocks = exynos4_init_clocks,
- .init_uarts = exynos_init_uarts,
+ .init_uarts = exynos4_init_uarts,
.init = exynos_init,
.name = name_exynos4412,
}, {
@@ -95,7 +96,6 @@
.idmask = EXYNOS5_SOC_MASK,
.map_io = exynos5_map_io,
.init_clocks = exynos5_init_clocks,
- .init_uarts = exynos_init_uarts,
.init = exynos_init,
.name = name_exynos5250,
},
@@ -256,25 +256,10 @@
.length = SZ_64K,
.type = MT_DEVICE,
}, {
- .virtual = (unsigned long)S5P_VA_COMBINER_BASE,
- .pfn = __phys_to_pfn(EXYNOS5_PA_COMBINER),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
.virtual = (unsigned long)S3C_VA_UART,
.pfn = __phys_to_pfn(EXYNOS5_PA_UART),
.length = SZ_512K,
.type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_GIC_CPU,
- .pfn = __phys_to_pfn(EXYNOS5_PA_GIC_CPU),
- .length = SZ_8K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_GIC_DIST,
- .pfn = __phys_to_pfn(EXYNOS5_PA_GIC_DIST),
- .length = SZ_4K,
- .type = MT_DEVICE,
},
};
@@ -346,26 +331,13 @@
s5p_fb_setname(0, "exynos4-fb");
s5p_hdmi_setname("exynos4-hdmi");
+
+ s3c64xx_spi_setname("exynos4210-spi");
}
static void __init exynos5_map_io(void)
{
iotable_init(exynos5_iodesc, ARRAY_SIZE(exynos5_iodesc));
-
- s3c_device_i2c0.resource[0].start = EXYNOS5_PA_IIC(0);
- s3c_device_i2c0.resource[0].end = EXYNOS5_PA_IIC(0) + SZ_4K - 1;
- s3c_device_i2c0.resource[1].start = EXYNOS5_IRQ_IIC;
- s3c_device_i2c0.resource[1].end = EXYNOS5_IRQ_IIC;
-
- s3c_sdhci_setname(0, "exynos4-sdhci");
- s3c_sdhci_setname(1, "exynos4-sdhci");
- s3c_sdhci_setname(2, "exynos4-sdhci");
- s3c_sdhci_setname(3, "exynos4-sdhci");
-
- /* The I2C bus controllers are directly compatible with s3c2440 */
- s3c_i2c0_setname("s3c2440-i2c");
- s3c_i2c1_setname("s3c2440-i2c");
- s3c_i2c2_setname("s3c2440-i2c");
}
static void __init exynos4_init_clocks(int xtal)
@@ -584,7 +556,8 @@
}
#ifdef CONFIG_OF
-int __init combiner_of_init(struct device_node *np, struct device_node *parent)
+static int __init combiner_of_init(struct device_node *np,
+ struct device_node *parent)
{
void __iomem *combiner_base;
@@ -722,7 +695,7 @@
/* uart registration process */
-static void __init exynos_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+static void __init exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no)
{
struct s3c2410_uartcfg *tcfg = cfg;
u32 ucnt;
@@ -730,10 +703,7 @@
for (ucnt = 0; ucnt < no; ucnt++, tcfg++)
tcfg->has_fracval = 1;
- if (soc_is_exynos5250())
- s3c24xx_init_uartdevs("exynos4210-uart", exynos5_uart_resources, cfg, no);
- else
- s3c24xx_init_uartdevs("exynos4210-uart", exynos4_uart_resources, cfg, no);
+ s3c24xx_init_uartdevs("exynos4210-uart", exynos4_uart_resources, cfg, no);
}
static void __iomem *exynos_eint_base;
@@ -965,14 +935,7 @@
struct irq_chip *chip = irq_get_chip(irq);
chained_irq_enter(chip, desc);
- chip->irq_mask(&desc->irq_data);
-
- if (chip->irq_ack)
- chip->irq_ack(&desc->irq_data);
-
generic_handle_irq(*irq_data);
-
- chip->irq_unmask(&desc->irq_data);
chained_irq_exit(chip, desc);
}
diff --git a/arch/arm/mach-exynos/dev-audio.c b/arch/arm/mach-exynos/dev-audio.c
index ae321c7..a1cb42c 100644
--- a/arch/arm/mach-exynos/dev-audio.c
+++ b/arch/arm/mach-exynos/dev-audio.c
@@ -14,9 +14,9 @@
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/gpio.h>
+#include <linux/platform_data/asoc-s3c.h>
#include <plat/gpio-cfg.h>
-#include <linux/platform_data/asoc-s3c.h>
#include <mach/map.h>
#include <mach/dma.h>
diff --git a/arch/arm/mach-exynos/dev-ohci.c b/arch/arm/mach-exynos/dev-ohci.c
index 14ed795..4244d02 100644
--- a/arch/arm/mach-exynos/dev-ohci.c
+++ b/arch/arm/mach-exynos/dev-ohci.c
@@ -12,10 +12,10 @@
#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
+#include <linux/platform_data/usb-exynos.h>
#include <mach/irqs.h>
#include <mach/map.h>
-#include <linux/platform_data/usb-exynos.h>
#include <plat/devs.h>
#include <plat/usb-phy.h>
diff --git a/arch/arm/mach-exynos/dev-uart.c b/arch/arm/mach-exynos/dev-uart.c
index 2e85c02..7c42f4b 100644
--- a/arch/arm/mach-exynos/dev-uart.c
+++ b/arch/arm/mach-exynos/dev-uart.c
@@ -52,27 +52,3 @@
.nr_resources = ARRAY_SIZE(exynos4_uart3_resource),
},
};
-
-EXYNOS_UART_RESOURCE(5, 0)
-EXYNOS_UART_RESOURCE(5, 1)
-EXYNOS_UART_RESOURCE(5, 2)
-EXYNOS_UART_RESOURCE(5, 3)
-
-struct s3c24xx_uart_resources exynos5_uart_resources[] __initdata = {
- [0] = {
- .resources = exynos5_uart0_resource,
- .nr_resources = ARRAY_SIZE(exynos5_uart0_resource),
- },
- [1] = {
- .resources = exynos5_uart1_resource,
- .nr_resources = ARRAY_SIZE(exynos5_uart0_resource),
- },
- [2] = {
- .resources = exynos5_uart2_resource,
- .nr_resources = ARRAY_SIZE(exynos5_uart2_resource),
- },
- [3] = {
- .resources = exynos5_uart3_resource,
- .nr_resources = ARRAY_SIZE(exynos5_uart3_resource),
- },
-};
diff --git a/arch/arm/mach-exynos/dma.c b/arch/arm/mach-exynos/dma.c
index 21d568b..87e07d6 100644
--- a/arch/arm/mach-exynos/dma.c
+++ b/arch/arm/mach-exynos/dma.c
@@ -275,6 +275,9 @@
exynos_pdma1_pdata.nr_valid_peri =
ARRAY_SIZE(exynos4210_pdma1_peri);
exynos_pdma1_pdata.peri_id = exynos4210_pdma1_peri;
+
+ if (samsung_rev() == EXYNOS4210_REV_0)
+ exynos_mdma1_device.res.start = EXYNOS4_PA_S_MDMA1;
} else if (soc_is_exynos4212() || soc_is_exynos4412()) {
exynos_pdma0_pdata.nr_valid_peri =
ARRAY_SIZE(exynos4212_pdma0_peri);
diff --git a/arch/arm/mach-exynos/include/mach/irqs.h b/arch/arm/mach-exynos/include/mach/irqs.h
index 35bced6..6da3115 100644
--- a/arch/arm/mach-exynos/include/mach/irqs.h
+++ b/arch/arm/mach-exynos/include/mach/irqs.h
@@ -259,11 +259,6 @@
#define EXYNOS5_IRQ_IEM_IEC IRQ_SPI(48)
#define EXYNOS5_IRQ_IEM_APC IRQ_SPI(49)
#define EXYNOS5_IRQ_GPIO_C2C IRQ_SPI(50)
-#define EXYNOS5_IRQ_UART0 IRQ_SPI(51)
-#define EXYNOS5_IRQ_UART1 IRQ_SPI(52)
-#define EXYNOS5_IRQ_UART2 IRQ_SPI(53)
-#define EXYNOS5_IRQ_UART3 IRQ_SPI(54)
-#define EXYNOS5_IRQ_UART4 IRQ_SPI(55)
#define EXYNOS5_IRQ_IIC IRQ_SPI(56)
#define EXYNOS5_IRQ_IIC1 IRQ_SPI(57)
#define EXYNOS5_IRQ_IIC2 IRQ_SPI(58)
diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h
index 8480849..872840b 100644
--- a/arch/arm/mach-exynos/include/mach/map.h
+++ b/arch/arm/mach-exynos/include/mach/map.h
@@ -90,6 +90,7 @@
#define EXYNOS4_PA_MDMA0 0x10810000
#define EXYNOS4_PA_MDMA1 0x12850000
+#define EXYNOS4_PA_S_MDMA1 0x12840000
#define EXYNOS4_PA_PDMA0 0x12680000
#define EXYNOS4_PA_PDMA1 0x12690000
#define EXYNOS5_PA_MDMA0 0x10800000
@@ -279,7 +280,6 @@
#define EXYNOS5_PA_UART1 0x12C10000
#define EXYNOS5_PA_UART2 0x12C20000
#define EXYNOS5_PA_UART3 0x12C30000
-#define EXYNOS5_SZ_UART SZ_256
#define S3C_VA_UARTx(x) (S3C_VA_UART + ((x) * S3C_UART_OFFSET))
diff --git a/arch/arm/mach-exynos/include/mach/regs-pmu.h b/arch/arm/mach-exynos/include/mach/regs-pmu.h
index d4e392b..70b2795 100644
--- a/arch/arm/mach-exynos/include/mach/regs-pmu.h
+++ b/arch/arm/mach-exynos/include/mach/regs-pmu.h
@@ -230,8 +230,6 @@
/* For EXYNOS5 */
-#define EXYNOS5_USB_CFG S5P_PMUREG(0x0230)
-
#define EXYNOS5_AUTO_WDTRESET_DISABLE S5P_PMUREG(0x0408)
#define EXYNOS5_MASK_WDTRESET_REQUEST S5P_PMUREG(0x040C)
diff --git a/arch/arm/mach-exynos/mach-exynos4-dt.c b/arch/arm/mach-exynos/mach-exynos4-dt.c
index e58d786..eadf4b5 100644
--- a/arch/arm/mach-exynos/mach-exynos4-dt.c
+++ b/arch/arm/mach-exynos/mach-exynos4-dt.c
@@ -99,6 +99,7 @@
DT_MACHINE_START(EXYNOS4210_DT, "Samsung Exynos4 (Flattened Device Tree)")
/* Maintainer: Thomas Abraham <thomas.abraham@linaro.org> */
+ .smp = smp_ops(exynos_smp_ops),
.init_irq = exynos4_init_irq,
.map_io = exynos4_dt_map_io,
.handle_irq = gic_handle_irq,
diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c
index c05d7aa..69359a0 100644
--- a/arch/arm/mach-exynos/mach-nuri.c
+++ b/arch/arm/mach-exynos/mach-nuri.c
@@ -25,7 +25,10 @@
#include <linux/mmc/host.h>
#include <linux/fb.h>
#include <linux/pwm_backlight.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <linux/platform_data/mipi-csis.h>
#include <linux/platform_data/s3c-hsotg.h>
+#include <linux/platform_data/usb-ehci-s5p.h>
#include <drm/exynos_drm.h>
#include <video/platform_lcd.h>
@@ -45,14 +48,11 @@
#include <plat/devs.h>
#include <plat/fb.h>
#include <plat/sdhci.h>
-#include <linux/platform_data/usb-ehci-s5p.h>
#include <plat/clock.h>
#include <plat/gpio-cfg.h>
-#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/mfc.h>
#include <plat/fimc-core.h>
#include <plat/camport.h>
-#include <linux/platform_data/mipi-csis.h>
#include <mach/map.h>
@@ -113,7 +113,6 @@
.host_caps = (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA |
MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
MMC_CAP_ERASE),
- .host_caps2 = MMC_CAP2_BROKEN_VOLTAGE,
.cd_type = S3C_SDHCI_CD_PERMANENT,
};
diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c
index 9adf491..485ce6c 100644
--- a/arch/arm/mach-exynos/mach-origen.c
+++ b/arch/arm/mach-exynos/mach-origen.c
@@ -23,7 +23,10 @@
#include <linux/mfd/max8997.h>
#include <linux/lcd.h>
#include <linux/rfkill-gpio.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <linux/platform_data/s3c-hsotg.h>
+#include <linux/platform_data/usb-ehci-s5p.h>
+#include <linux/platform_data/usb-exynos.h>
#include <asm/mach/arch.h>
#include <asm/hardware/gic.h>
@@ -36,8 +39,6 @@
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/sdhci.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <linux/platform_data/usb-ehci-s5p.h>
#include <plat/clock.h>
#include <plat/gpio-cfg.h>
#include <plat/backlight.h>
@@ -45,7 +46,6 @@
#include <plat/mfc.h>
#include <plat/hdmi.h>
-#include <linux/platform_data/usb-exynos.h>
#include <mach/map.h>
#include <drm/exynos_drm.h>
diff --git a/arch/arm/mach-exynos/mach-smdk4x12.c b/arch/arm/mach-exynos/mach-smdk4x12.c
index 730f1ac..ddb9263 100644
--- a/arch/arm/mach-exynos/mach-smdk4x12.c
+++ b/arch/arm/mach-exynos/mach-smdk4x12.c
@@ -21,6 +21,7 @@
#include <linux/pwm_backlight.h>
#include <linux/regulator/machine.h>
#include <linux/serial_core.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <linux/platform_data/s3c-hsotg.h>
#include <asm/mach/arch.h>
@@ -34,7 +35,6 @@
#include <plat/devs.h>
#include <plat/fb.h>
#include <plat/gpio-cfg.h>
-#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/keypad.h>
#include <plat/mfc.h>
#include <plat/regs-serial.h>
diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c
index ee4fb1a..8dd6a1e 100644
--- a/arch/arm/mach-exynos/mach-smdkv310.c
+++ b/arch/arm/mach-exynos/mach-smdkv310.c
@@ -20,7 +20,10 @@
#include <linux/input.h>
#include <linux/pwm.h>
#include <linux/pwm_backlight.h>
+#include <linux/platform_data/i2c-s3c2410.h>
#include <linux/platform_data/s3c-hsotg.h>
+#include <linux/platform_data/usb-ehci-s5p.h>
+#include <linux/platform_data/usb-exynos.h>
#include <asm/mach/arch.h>
#include <asm/hardware/gic.h>
@@ -35,16 +38,13 @@
#include <plat/fb.h>
#include <plat/keypad.h>
#include <plat/sdhci.h>
-#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
#include <plat/backlight.h>
#include <plat/mfc.h>
-#include <linux/platform_data/usb-ehci-s5p.h>
#include <plat/clock.h>
#include <plat/hdmi.h>
#include <mach/map.h>
-#include <linux/platform_data/usb-exynos.h>
#include <drm/exynos_drm.h>
#include "common.h"
diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c
index ebc9dd3..2d6bc83 100644
--- a/arch/arm/mach-exynos/mach-universal_c210.c
+++ b/arch/arm/mach-exynos/mach-universal_c210.c
@@ -23,6 +23,8 @@
#include <linux/i2c-gpio.h>
#include <linux/i2c/mcs.h>
#include <linux/i2c/atmel_mxt_ts.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <linux/platform_data/mipi-csis.h>
#include <linux/platform_data/s3c-hsotg.h>
#include <drm/exynos_drm.h>
@@ -35,7 +37,6 @@
#include <plat/clock.h>
#include <plat/cpu.h>
#include <plat/devs.h>
-#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
#include <plat/fb.h>
#include <plat/mfc.h>
@@ -43,7 +44,6 @@
#include <plat/fimc-core.h>
#include <plat/s5p-time.h>
#include <plat/camport.h>
-#include <linux/platform_data/mipi-csis.h>
#include <mach/map.h>
@@ -754,7 +754,6 @@
.max_width = 8,
.host_caps = (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA |
MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
- .host_caps2 = MMC_CAP2_BROKEN_VOLTAGE,
.cd_type = S3C_SDHCI_CD_PERMANENT,
};
diff --git a/arch/arm/mach-highbank/system.c b/arch/arm/mach-highbank/system.c
index 82c27230..86e37cd 100644
--- a/arch/arm/mach-highbank/system.c
+++ b/arch/arm/mach-highbank/system.c
@@ -28,6 +28,7 @@
hignbank_set_pwr_soft_reset();
scu_power_mode(scu_base_addr, SCU_PM_POWEROFF);
- cpu_do_idle();
+ while (1)
+ cpu_do_idle();
}
diff --git a/arch/arm/plat-mxc/3ds_debugboard.c b/arch/arm/mach-imx/3ds_debugboard.c
similarity index 99%
rename from arch/arm/plat-mxc/3ds_debugboard.c
rename to arch/arm/mach-imx/3ds_debugboard.c
index 5c10ad0..1343773 100644
--- a/arch/arm/plat-mxc/3ds_debugboard.c
+++ b/arch/arm/mach-imx/3ds_debugboard.c
@@ -21,7 +21,7 @@
#include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>
-#include <mach/hardware.h>
+#include "hardware.h"
/* LAN9217 ethernet base address */
#define LAN9217_BASE_ADDR(n) (n + 0x0)
diff --git a/arch/arm/plat-mxc/include/mach/3ds_debugboard.h b/arch/arm/mach-imx/3ds_debugboard.h
similarity index 100%
rename from arch/arm/plat-mxc/include/mach/3ds_debugboard.h
rename to arch/arm/mach-imx/3ds_debugboard.h
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 8d27658..f1bf610 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -1,3 +1,70 @@
+config ARCH_MXC
+ bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7
+ select ARCH_REQUIRE_GPIOLIB
+ select ARM_PATCH_PHYS_VIRT
+ select AUTO_ZRELADDR if !ZBOOT_ROM
+ select CLKDEV_LOOKUP
+ select CLKSRC_MMIO
+ select GENERIC_CLOCKEVENTS
+ select GENERIC_IRQ_CHIP
+ select MULTI_IRQ_HANDLER
+ select SPARSE_IRQ
+ select USE_OF
+ help
+ Support for Freescale MXC/iMX-based family of processors
+
+menu "Freescale i.MX support"
+ depends on ARCH_MXC
+
+config MXC_IRQ_PRIOR
+ bool "Use IRQ priority"
+ help
+ Select this if you want to use prioritized IRQ handling.
+ This feature prevents higher priority ISR to be interrupted
+ by lower priority IRQ even IRQF_DISABLED flag is not set.
+ This may be useful in embedded applications, where are strong
+ requirements for timing.
+ Say N here, unless you have a specialized requirement.
+
+config MXC_TZIC
+ bool
+
+config MXC_AVIC
+ bool
+
+config MXC_DEBUG_BOARD
+ bool "Enable MXC debug board(for 3-stack)"
+ help
+ The debug board is an integral part of the MXC 3-stack(PDK)
+ platforms, it can be attached or removed from the peripheral
+ board. On debug board, several debug devices(ethernet, UART,
+ buttons, LEDs and JTAG) are implemented. Between the MCU and
+ these devices, a CPLD is added as a bridge which performs
+ data/address de-multiplexing and decode, signal level shift,
+ interrupt control and various board functions.
+
+config HAVE_EPIT
+ bool
+
+config MXC_USE_EPIT
+ bool "Use EPIT instead of GPT"
+ depends on HAVE_EPIT
+ help
+ Use EPIT as the system timer on systems that have it. Normally you
+ don't have a reason to do so as the EPIT has the same features and
+ uses the same clocks as the GPT. Anyway, on some systems the GPT
+ may be in use for other purposes.
+
+config MXC_ULPI
+ bool
+
+config ARCH_HAS_RNGA
+ bool
+
+config IRAM_ALLOC
+ bool
+ select GENERIC_ALLOCATOR
+
config HAVE_IMX_GPC
bool
@@ -5,6 +72,12 @@
bool
config HAVE_IMX_SRC
+ def_bool y if SMP
+
+config IMX_HAVE_IOMUX_V1
+ bool
+
+config ARCH_MXC_IOMUX_V3
bool
config ARCH_MX1
@@ -104,7 +177,7 @@
select PINCTRL_IMX51
select SOC_IMX5
-if ARCH_IMX_V4_V5
+if ARCH_MULTI_V4T
comment "MX1 platforms:"
config MACH_MXLADS
@@ -133,6 +206,10 @@
help
Say Yes here if you are using the Armadeus APF9328 development board
+endif
+
+if ARCH_MULTI_V5
+
comment "MX21 platforms:"
config MACH_MX21ADS
@@ -384,7 +461,7 @@
endif
-if ARCH_IMX_V6_V7
+if ARCH_MULTI_V6
comment "MX31 platforms:"
@@ -649,6 +726,10 @@
Include support for VPR200 platform. This includes specific
configurations for the board and its peripherals.
+endif
+
+if ARCH_MULTI_V7
+
comment "i.MX5 platforms:"
config MACH_MX50_RDP
@@ -756,7 +837,6 @@
select HAVE_CAN_FLEXCAN if CAN
select HAVE_IMX_GPC
select HAVE_IMX_MMDC
- select HAVE_IMX_SRC
select HAVE_SMP
select MFD_SYSCON
select PINCTRL
@@ -766,3 +846,7 @@
This enables support for Freescale i.MX6 Quad processor.
endif
+
+source "arch/arm/mach-imx/devices/Kconfig"
+
+endmenu
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 895754a..fe47b71 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -1,3 +1,5 @@
+obj-y := time.o cpu.o system.o irq-common.o
+
obj-$(CONFIG_SOC_IMX1) += clk-imx1.o mm-imx1.o
obj-$(CONFIG_SOC_IMX21) += clk-imx21.o mm-imx21.o
@@ -15,6 +17,24 @@
obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \
clk-pfd.o clk-busy.o clk.o
+obj-$(CONFIG_IMX_HAVE_IOMUX_V1) += iomux-v1.o
+obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o
+
+obj-$(CONFIG_MXC_TZIC) += tzic.o
+obj-$(CONFIG_MXC_AVIC) += avic.o
+
+obj-$(CONFIG_IRAM_ALLOC) += iram_alloc.o
+obj-$(CONFIG_MXC_ULPI) += ulpi.o
+obj-$(CONFIG_MXC_USE_EPIT) += epit.o
+obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o
+obj-$(CONFIG_CPU_FREQ_IMX) += cpufreq.o
+obj-$(CONFIG_CPU_IDLE) += cpuidle.o
+
+ifdef CONFIG_SND_IMX_SOC
+obj-y += ssi-fiq.o
+obj-y += ssi-fiq-ksym.o
+endif
+
# Support for CMOS sensor interface
obj-$(CONFIG_MX1_VIDEO) += mx1-camera-fiq.o mx1-camera-fiq-ksym.o
@@ -89,3 +109,5 @@
obj-$(CONFIG_MACH_IMX51_DT) += imx51-dt.o
obj-$(CONFIG_SOC_IMX53) += mach-imx53.o
+
+obj-y += devices/
diff --git a/arch/arm/plat-mxc/avic.c b/arch/arm/mach-imx/avic.c
similarity index 98%
rename from arch/arm/plat-mxc/avic.c
rename to arch/arm/mach-imx/avic.c
index cbd55c3..0eff23e 100644
--- a/arch/arm/plat-mxc/avic.c
+++ b/arch/arm/mach-imx/avic.c
@@ -22,12 +22,11 @@
#include <linux/irqdomain.h>
#include <linux/io.h>
#include <linux/of.h>
-#include <mach/common.h>
#include <asm/mach/irq.h>
#include <asm/exception.h>
-#include <mach/hardware.h>
-#include <mach/irqs.h>
+#include "common.h"
+#include "hardware.h"
#include "irq-common.h"
#define AVIC_INTCNTL 0x00 /* int control reg */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31lilly.h b/arch/arm/mach-imx/board-mx31lilly.h
similarity index 100%
rename from arch/arm/plat-mxc/include/mach/board-mx31lilly.h
rename to arch/arm/mach-imx/board-mx31lilly.h
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31lite.h b/arch/arm/mach-imx/board-mx31lite.h
similarity index 100%
rename from arch/arm/plat-mxc/include/mach/board-mx31lite.h
rename to arch/arm/mach-imx/board-mx31lite.h
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31moboard.h b/arch/arm/mach-imx/board-mx31moboard.h
similarity index 100%
rename from arch/arm/plat-mxc/include/mach/board-mx31moboard.h
rename to arch/arm/mach-imx/board-mx31moboard.h
diff --git a/arch/arm/plat-mxc/include/mach/board-pcm038.h b/arch/arm/mach-imx/board-pcm038.h
similarity index 100%
rename from arch/arm/plat-mxc/include/mach/board-pcm038.h
rename to arch/arm/mach-imx/board-pcm038.h
diff --git a/arch/arm/mach-imx/clk-busy.c b/arch/arm/mach-imx/clk-busy.c
index 1a7a8dd..1ab91b5 100644
--- a/arch/arm/mach-imx/clk-busy.c
+++ b/arch/arm/mach-imx/clk-busy.c
@@ -108,7 +108,7 @@
busy->div.hw.init = &init;
clk = clk_register(NULL, &busy->div.hw);
- if (!clk)
+ if (IS_ERR(clk))
kfree(busy);
return clk;
diff --git a/arch/arm/mach-imx/clk-gate2.c b/arch/arm/mach-imx/clk-gate2.c
index 3c1b8ff..cc49c7a 100644
--- a/arch/arm/mach-imx/clk-gate2.c
+++ b/arch/arm/mach-imx/clk-gate2.c
@@ -112,7 +112,7 @@
clk = clk_register(dev, &gate->hw);
if (IS_ERR(clk))
- kfree(clk);
+ kfree(gate);
return clk;
}
diff --git a/arch/arm/mach-imx/clk-imx1.c b/arch/arm/mach-imx/clk-imx1.c
index 516ddee..15f9d22 100644
--- a/arch/arm/mach-imx/clk-imx1.c
+++ b/arch/arm/mach-imx/clk-imx1.c
@@ -22,9 +22,9 @@
#include <linux/clkdev.h>
#include <linux/err.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
#include "clk.h"
+#include "common.h"
+#include "hardware.h"
/* CCM register addresses */
#define IO_ADDR_CCM(off) (MX1_IO_ADDRESS(MX1_CCM_BASE_ADDR + (off)))
@@ -82,7 +82,8 @@
pr_err("imx1 clk %d: register failed with %ld\n",
i, PTR_ERR(clk[i]));
- clk_register_clkdev(clk[dma_gate], "ahb", "imx-dma");
+ clk_register_clkdev(clk[dma_gate], "ahb", "imx1-dma");
+ clk_register_clkdev(clk[hclk], "ipg", "imx1-dma");
clk_register_clkdev(clk[csi_gate], NULL, "mx1-camera.0");
clk_register_clkdev(clk[mma_gate], "mma", NULL);
clk_register_clkdev(clk[usbd_gate], NULL, "imx_udc.0");
@@ -94,18 +95,18 @@
clk_register_clkdev(clk[hclk], "ipg", "imx1-uart.1");
clk_register_clkdev(clk[per1], "per", "imx1-uart.2");
clk_register_clkdev(clk[hclk], "ipg", "imx1-uart.2");
- clk_register_clkdev(clk[hclk], NULL, "imx-i2c.0");
+ clk_register_clkdev(clk[hclk], NULL, "imx1-i2c.0");
clk_register_clkdev(clk[per2], "per", "imx1-cspi.0");
clk_register_clkdev(clk[dummy], "ipg", "imx1-cspi.0");
clk_register_clkdev(clk[per2], "per", "imx1-cspi.1");
clk_register_clkdev(clk[dummy], "ipg", "imx1-cspi.1");
clk_register_clkdev(clk[per2], NULL, "imx-mmc.0");
- clk_register_clkdev(clk[per2], "per", "imx-fb.0");
- clk_register_clkdev(clk[dummy], "ipg", "imx-fb.0");
- clk_register_clkdev(clk[dummy], "ahb", "imx-fb.0");
+ clk_register_clkdev(clk[per2], "per", "imx1-fb.0");
+ clk_register_clkdev(clk[dummy], "ipg", "imx1-fb.0");
+ clk_register_clkdev(clk[dummy], "ahb", "imx1-fb.0");
clk_register_clkdev(clk[hclk], "mshc", NULL);
clk_register_clkdev(clk[per3], "ssi", NULL);
- clk_register_clkdev(clk[clk32], NULL, "mxc_rtc.0");
+ clk_register_clkdev(clk[clk32], NULL, "imx1-rtc.0");
clk_register_clkdev(clk[clko], "clko", NULL);
mxc_timer_init(MX1_IO_ADDRESS(MX1_TIM1_BASE_ADDR), MX1_TIM1_INT);
diff --git a/arch/arm/mach-imx/clk-imx21.c b/arch/arm/mach-imx/clk-imx21.c
index cf65148..d7ed660 100644
--- a/arch/arm/mach-imx/clk-imx21.c
+++ b/arch/arm/mach-imx/clk-imx21.c
@@ -25,9 +25,9 @@
#include <linux/module.h>
#include <linux/err.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
#include "clk.h"
+#include "common.h"
+#include "hardware.h"
#define IO_ADDR_CCM(off) (MX21_IO_ADDRESS(MX21_CCM_BASE_ADDR + (off)))
@@ -156,16 +156,16 @@
clk_register_clkdev(clk[cspi2_ipg_gate], "ipg", "imx21-cspi.1");
clk_register_clkdev(clk[per2], "per", "imx21-cspi.2");
clk_register_clkdev(clk[cspi3_ipg_gate], "ipg", "imx21-cspi.2");
- clk_register_clkdev(clk[per3], "per", "imx-fb.0");
- clk_register_clkdev(clk[lcdc_ipg_gate], "ipg", "imx-fb.0");
- clk_register_clkdev(clk[lcdc_hclk_gate], "ahb", "imx-fb.0");
+ clk_register_clkdev(clk[per3], "per", "imx21-fb.0");
+ clk_register_clkdev(clk[lcdc_ipg_gate], "ipg", "imx21-fb.0");
+ clk_register_clkdev(clk[lcdc_hclk_gate], "ahb", "imx21-fb.0");
clk_register_clkdev(clk[usb_gate], "per", "imx21-hcd.0");
clk_register_clkdev(clk[usb_hclk_gate], "ahb", "imx21-hcd.0");
- clk_register_clkdev(clk[nfc_gate], NULL, "mxc_nand.0");
- clk_register_clkdev(clk[dma_hclk_gate], "ahb", "imx-dma");
- clk_register_clkdev(clk[dma_gate], "ipg", "imx-dma");
+ clk_register_clkdev(clk[nfc_gate], NULL, "imx21-nand.0");
+ clk_register_clkdev(clk[dma_hclk_gate], "ahb", "imx21-dma");
+ clk_register_clkdev(clk[dma_gate], "ipg", "imx21-dma");
clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0");
- clk_register_clkdev(clk[i2c_gate], NULL, "imx-i2c.0");
+ clk_register_clkdev(clk[i2c_gate], NULL, "imx21-i2c.0");
clk_register_clkdev(clk[kpp_gate], NULL, "mxc-keypad");
clk_register_clkdev(clk[owire_gate], NULL, "mxc_w1.0");
clk_register_clkdev(clk[brom_gate], "brom", NULL);
diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c
index d20d479..bc88580 100644
--- a/arch/arm/mach-imx/clk-imx25.c
+++ b/arch/arm/mach-imx/clk-imx25.c
@@ -24,10 +24,10 @@
#include <linux/clkdev.h>
#include <linux/err.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/mx25.h>
#include "clk.h"
+#include "common.h"
+#include "hardware.h"
+#include "mx25.h"
#define CRM_BASE MX25_IO_ADDRESS(MX25_CRM_BASE_ADDR)
@@ -127,8 +127,8 @@
clk[esdhc2_ipg_per] = imx_clk_gate("esdhc2_ipg_per", "per4", ccm(CCM_CGCR0), 4);
clk[gpt_ipg_per] = imx_clk_gate("gpt_ipg_per", "per5", ccm(CCM_CGCR0), 5);
clk[i2c_ipg_per] = imx_clk_gate("i2c_ipg_per", "per6", ccm(CCM_CGCR0), 6);
- clk[lcdc_ipg_per] = imx_clk_gate("lcdc_ipg_per", "per8", ccm(CCM_CGCR0), 7);
- clk[nfc_ipg_per] = imx_clk_gate("nfc_ipg_per", "ipg_per", ccm(CCM_CGCR0), 8);
+ clk[lcdc_ipg_per] = imx_clk_gate("lcdc_ipg_per", "per7", ccm(CCM_CGCR0), 7);
+ clk[nfc_ipg_per] = imx_clk_gate("nfc_ipg_per", "per8", ccm(CCM_CGCR0), 8);
clk[ssi1_ipg_per] = imx_clk_gate("ssi1_ipg_per", "per13", ccm(CCM_CGCR0), 13);
clk[ssi2_ipg_per] = imx_clk_gate("ssi2_ipg_per", "per14", ccm(CCM_CGCR0), 14);
clk[uart_ipg_per] = imx_clk_gate("uart_ipg_per", "per15", ccm(CCM_CGCR0), 15);
@@ -197,7 +197,7 @@
clk_register_clkdev(clk[ipg], "ipg", "fsl-usb2-udc");
clk_register_clkdev(clk[usbotg_ahb], "ahb", "fsl-usb2-udc");
clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc");
- clk_register_clkdev(clk[nfc_ipg_per], NULL, "mxc_nand.0");
+ clk_register_clkdev(clk[nfc_ipg_per], NULL, "imx25-nand.0");
/* i.mx25 has the i.mx35 type cspi */
clk_register_clkdev(clk[cspi1_ipg], NULL, "imx35-cspi.0");
clk_register_clkdev(clk[cspi2_ipg], NULL, "imx35-cspi.1");
@@ -212,15 +212,15 @@
clk_register_clkdev(clk[per10], "per", "mxc_pwm.3");
clk_register_clkdev(clk[kpp_ipg], NULL, "imx-keypad");
clk_register_clkdev(clk[tsc_ipg], NULL, "mx25-adc");
- clk_register_clkdev(clk[i2c_ipg_per], NULL, "imx-i2c.0");
- clk_register_clkdev(clk[i2c_ipg_per], NULL, "imx-i2c.1");
- clk_register_clkdev(clk[i2c_ipg_per], NULL, "imx-i2c.2");
+ clk_register_clkdev(clk[i2c_ipg_per], NULL, "imx21-i2c.0");
+ clk_register_clkdev(clk[i2c_ipg_per], NULL, "imx21-i2c.1");
+ clk_register_clkdev(clk[i2c_ipg_per], NULL, "imx21-i2c.2");
clk_register_clkdev(clk[fec_ipg], "ipg", "imx25-fec.0");
clk_register_clkdev(clk[fec_ahb], "ahb", "imx25-fec.0");
clk_register_clkdev(clk[dryice_ipg], NULL, "imxdi_rtc.0");
- clk_register_clkdev(clk[lcdc_ipg_per], "per", "imx-fb.0");
- clk_register_clkdev(clk[lcdc_ipg], "ipg", "imx-fb.0");
- clk_register_clkdev(clk[lcdc_ahb], "ahb", "imx-fb.0");
+ clk_register_clkdev(clk[lcdc_ipg_per], "per", "imx21-fb.0");
+ clk_register_clkdev(clk[lcdc_ipg], "ipg", "imx21-fb.0");
+ clk_register_clkdev(clk[lcdc_ahb], "ahb", "imx21-fb.0");
clk_register_clkdev(clk[wdt_ipg], NULL, "imx2-wdt.0");
clk_register_clkdev(clk[ssi1_ipg], NULL, "imx-ssi.0");
clk_register_clkdev(clk[ssi2_ipg], NULL, "imx-ssi.1");
@@ -230,9 +230,9 @@
clk_register_clkdev(clk[esdhc2_ipg_per], "per", "sdhci-esdhc-imx25.1");
clk_register_clkdev(clk[esdhc2_ipg], "ipg", "sdhci-esdhc-imx25.1");
clk_register_clkdev(clk[esdhc2_ahb], "ahb", "sdhci-esdhc-imx25.1");
- clk_register_clkdev(clk[csi_ipg_per], "per", "mx2-camera.0");
- clk_register_clkdev(clk[csi_ipg], "ipg", "mx2-camera.0");
- clk_register_clkdev(clk[csi_ahb], "ahb", "mx2-camera.0");
+ clk_register_clkdev(clk[csi_ipg_per], "per", "imx25-camera.0");
+ clk_register_clkdev(clk[csi_ipg], "ipg", "imx25-camera.0");
+ clk_register_clkdev(clk[csi_ahb], "ahb", "imx25-camera.0");
clk_register_clkdev(clk[dummy], "audmux", NULL);
clk_register_clkdev(clk[can1_ipg], NULL, "flexcan.0");
clk_register_clkdev(clk[can2_ipg], NULL, "flexcan.1");
diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c
index 3b6b640..585ab25 100644
--- a/arch/arm/mach-imx/clk-imx27.c
+++ b/arch/arm/mach-imx/clk-imx27.c
@@ -6,9 +6,9 @@
#include <linux/clk-provider.h>
#include <linux/of.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
#include "clk.h"
+#include "common.h"
+#include "hardware.h"
#define IO_ADDR_CCM(off) (MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR + (off)))
@@ -109,7 +109,7 @@
clk[per3_div] = imx_clk_divider("per3_div", "mpll_main2", CCM_PCDR1, 16, 6);
clk[per4_div] = imx_clk_divider("per4_div", "mpll_main2", CCM_PCDR1, 24, 6);
clk[vpu_sel] = imx_clk_mux("vpu_sel", CCM_CSCR, 21, 1, vpu_sel_clks, ARRAY_SIZE(vpu_sel_clks));
- clk[vpu_div] = imx_clk_divider("vpu_div", "vpu_sel", CCM_PCDR0, 10, 3);
+ clk[vpu_div] = imx_clk_divider("vpu_div", "vpu_sel", CCM_PCDR0, 10, 6);
clk[usb_div] = imx_clk_divider("usb_div", "spll", CCM_CSCR, 28, 3);
clk[cpu_sel] = imx_clk_mux("cpu_sel", CCM_CSCR, 15, 1, cpu_sel_clks, ARRAY_SIZE(cpu_sel_clks));
clk[clko_sel] = imx_clk_mux("clko_sel", CCM_CCSR, 0, 5, clko_sel_clks, ARRAY_SIZE(clko_sel_clks));
@@ -121,7 +121,7 @@
clk[ssi1_sel] = imx_clk_mux("ssi1_sel", CCM_CSCR, 22, 1, ssi_sel_clks, ARRAY_SIZE(ssi_sel_clks));
clk[ssi2_sel] = imx_clk_mux("ssi2_sel", CCM_CSCR, 23, 1, ssi_sel_clks, ARRAY_SIZE(ssi_sel_clks));
clk[ssi1_div] = imx_clk_divider("ssi1_div", "ssi1_sel", CCM_PCDR0, 16, 6);
- clk[ssi2_div] = imx_clk_divider("ssi2_div", "ssi2_sel", CCM_PCDR0, 26, 3);
+ clk[ssi2_div] = imx_clk_divider("ssi2_div", "ssi2_sel", CCM_PCDR0, 26, 6);
clk[clko_en] = imx_clk_gate("clko_en", "clko_div", CCM_PCCR0, 0);
clk[ssi2_ipg_gate] = imx_clk_gate("ssi2_ipg_gate", "ipg", CCM_PCCR0, 0);
clk[ssi1_ipg_gate] = imx_clk_gate("ssi1_ipg_gate", "ipg", CCM_PCCR0, 1);
@@ -211,19 +211,19 @@
clk_register_clkdev(clk[gpt6_ipg_gate], "ipg", "imx-gpt.5");
clk_register_clkdev(clk[per1_gate], "per", "imx-gpt.5");
clk_register_clkdev(clk[pwm_ipg_gate], NULL, "mxc_pwm.0");
- clk_register_clkdev(clk[per2_gate], "per", "mxc-mmc.0");
- clk_register_clkdev(clk[sdhc1_ipg_gate], "ipg", "mxc-mmc.0");
- clk_register_clkdev(clk[per2_gate], "per", "mxc-mmc.1");
- clk_register_clkdev(clk[sdhc2_ipg_gate], "ipg", "mxc-mmc.1");
- clk_register_clkdev(clk[per2_gate], "per", "mxc-mmc.2");
- clk_register_clkdev(clk[sdhc2_ipg_gate], "ipg", "mxc-mmc.2");
+ clk_register_clkdev(clk[per2_gate], "per", "imx21-mmc.0");
+ clk_register_clkdev(clk[sdhc1_ipg_gate], "ipg", "imx21-mmc.0");
+ clk_register_clkdev(clk[per2_gate], "per", "imx21-mmc.1");
+ clk_register_clkdev(clk[sdhc2_ipg_gate], "ipg", "imx21-mmc.1");
+ clk_register_clkdev(clk[per2_gate], "per", "imx21-mmc.2");
+ clk_register_clkdev(clk[sdhc2_ipg_gate], "ipg", "imx21-mmc.2");
clk_register_clkdev(clk[cspi1_ipg_gate], NULL, "imx27-cspi.0");
clk_register_clkdev(clk[cspi2_ipg_gate], NULL, "imx27-cspi.1");
clk_register_clkdev(clk[cspi3_ipg_gate], NULL, "imx27-cspi.2");
- clk_register_clkdev(clk[per3_gate], "per", "imx-fb.0");
- clk_register_clkdev(clk[lcdc_ipg_gate], "ipg", "imx-fb.0");
- clk_register_clkdev(clk[lcdc_ahb_gate], "ahb", "imx-fb.0");
- clk_register_clkdev(clk[csi_ahb_gate], "ahb", "mx2-camera.0");
+ clk_register_clkdev(clk[per3_gate], "per", "imx21-fb.0");
+ clk_register_clkdev(clk[lcdc_ipg_gate], "ipg", "imx21-fb.0");
+ clk_register_clkdev(clk[lcdc_ahb_gate], "ahb", "imx21-fb.0");
+ clk_register_clkdev(clk[csi_ahb_gate], "ahb", "imx27-camera.0");
clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc");
clk_register_clkdev(clk[usb_ipg_gate], "ipg", "fsl-usb2-udc");
clk_register_clkdev(clk[usb_ahb_gate], "ahb", "fsl-usb2-udc");
@@ -238,27 +238,27 @@
clk_register_clkdev(clk[usb_ahb_gate], "ahb", "mxc-ehci.2");
clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "imx-ssi.0");
clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "imx-ssi.1");
- clk_register_clkdev(clk[nfc_baud_gate], NULL, "mxc_nand.0");
+ clk_register_clkdev(clk[nfc_baud_gate], NULL, "imx27-nand.0");
clk_register_clkdev(clk[vpu_baud_gate], "per", "coda-imx27.0");
clk_register_clkdev(clk[vpu_ahb_gate], "ahb", "coda-imx27.0");
- clk_register_clkdev(clk[dma_ahb_gate], "ahb", "imx-dma");
- clk_register_clkdev(clk[dma_ipg_gate], "ipg", "imx-dma");
+ clk_register_clkdev(clk[dma_ahb_gate], "ahb", "imx27-dma");
+ clk_register_clkdev(clk[dma_ipg_gate], "ipg", "imx27-dma");
clk_register_clkdev(clk[fec_ipg_gate], "ipg", "imx27-fec.0");
clk_register_clkdev(clk[fec_ahb_gate], "ahb", "imx27-fec.0");
clk_register_clkdev(clk[wdog_ipg_gate], NULL, "imx2-wdt.0");
- clk_register_clkdev(clk[i2c1_ipg_gate], NULL, "imx-i2c.0");
- clk_register_clkdev(clk[i2c2_ipg_gate], NULL, "imx-i2c.1");
+ clk_register_clkdev(clk[i2c1_ipg_gate], NULL, "imx21-i2c.0");
+ clk_register_clkdev(clk[i2c2_ipg_gate], NULL, "imx21-i2c.1");
clk_register_clkdev(clk[owire_ipg_gate], NULL, "mxc_w1.0");
clk_register_clkdev(clk[kpp_ipg_gate], NULL, "imx-keypad");
- clk_register_clkdev(clk[emma_ahb_gate], "emma-ahb", "mx2-camera.0");
- clk_register_clkdev(clk[emma_ipg_gate], "emma-ipg", "mx2-camera.0");
+ clk_register_clkdev(clk[emma_ahb_gate], "emma-ahb", "imx27-camera.0");
+ clk_register_clkdev(clk[emma_ipg_gate], "emma-ipg", "imx27-camera.0");
clk_register_clkdev(clk[emma_ahb_gate], "ahb", "m2m-emmaprp.0");
clk_register_clkdev(clk[emma_ipg_gate], "ipg", "m2m-emmaprp.0");
clk_register_clkdev(clk[iim_ipg_gate], "iim", NULL);
clk_register_clkdev(clk[gpio_ipg_gate], "gpio", NULL);
clk_register_clkdev(clk[brom_ahb_gate], "brom", NULL);
clk_register_clkdev(clk[ata_ahb_gate], "ata", NULL);
- clk_register_clkdev(clk[rtc_ipg_gate], NULL, "mxc_rtc");
+ clk_register_clkdev(clk[rtc_ipg_gate], NULL, "imx21-rtc");
clk_register_clkdev(clk[scc_ipg_gate], "scc", NULL);
clk_register_clkdev(clk[cpu_div], "cpu", NULL);
clk_register_clkdev(clk[emi_ahb_gate], "emi_ahb" , NULL);
diff --git a/arch/arm/mach-imx/clk-imx31.c b/arch/arm/mach-imx/clk-imx31.c
index 1253af2..8be64e0 100644
--- a/arch/arm/mach-imx/clk-imx31.c
+++ b/arch/arm/mach-imx/clk-imx31.c
@@ -22,12 +22,11 @@
#include <linux/err.h>
#include <linux/of.h>
-#include <mach/hardware.h>
-#include <mach/mx31.h>
-#include <mach/common.h>
-
#include "clk.h"
+#include "common.h"
#include "crmregs-imx3.h"
+#include "hardware.h"
+#include "mx31.h"
static const char *mcu_main_sel[] = { "spll", "mpll", };
static const char *per_sel[] = { "per_div", "ipg", };
@@ -124,10 +123,10 @@
clk_register_clkdev(clk[cspi3_gate], NULL, "imx31-cspi.2");
clk_register_clkdev(clk[pwm_gate], "pwm", NULL);
clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0");
- clk_register_clkdev(clk[rtc_gate], NULL, "mxc_rtc");
+ clk_register_clkdev(clk[rtc_gate], NULL, "imx21-rtc");
clk_register_clkdev(clk[epit1_gate], "epit", NULL);
clk_register_clkdev(clk[epit2_gate], "epit", NULL);
- clk_register_clkdev(clk[nfc], NULL, "mxc_nand.0");
+ clk_register_clkdev(clk[nfc], NULL, "imx27-nand.0");
clk_register_clkdev(clk[ipu_gate], NULL, "ipu-core");
clk_register_clkdev(clk[ipu_gate], NULL, "mx3_sdc_fb");
clk_register_clkdev(clk[kpp_gate], NULL, "imx-keypad");
@@ -155,12 +154,12 @@
clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.3");
clk_register_clkdev(clk[uart5_gate], "per", "imx21-uart.4");
clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.4");
- clk_register_clkdev(clk[i2c1_gate], NULL, "imx-i2c.0");
- clk_register_clkdev(clk[i2c2_gate], NULL, "imx-i2c.1");
- clk_register_clkdev(clk[i2c3_gate], NULL, "imx-i2c.2");
+ clk_register_clkdev(clk[i2c1_gate], NULL, "imx21-i2c.0");
+ clk_register_clkdev(clk[i2c2_gate], NULL, "imx21-i2c.1");
+ clk_register_clkdev(clk[i2c3_gate], NULL, "imx21-i2c.2");
clk_register_clkdev(clk[owire_gate], NULL, "mxc_w1.0");
- clk_register_clkdev(clk[sdhc1_gate], NULL, "mxc-mmc.0");
- clk_register_clkdev(clk[sdhc2_gate], NULL, "mxc-mmc.1");
+ clk_register_clkdev(clk[sdhc1_gate], NULL, "imx31-mmc.0");
+ clk_register_clkdev(clk[sdhc2_gate], NULL, "imx31-mmc.1");
clk_register_clkdev(clk[ssi1_gate], NULL, "imx-ssi.0");
clk_register_clkdev(clk[ssi2_gate], NULL, "imx-ssi.1");
clk_register_clkdev(clk[firi_gate], "firi", NULL);
diff --git a/arch/arm/mach-imx/clk-imx35.c b/arch/arm/mach-imx/clk-imx35.c
index 177259b..66f3d65 100644
--- a/arch/arm/mach-imx/clk-imx35.c
+++ b/arch/arm/mach-imx/clk-imx35.c
@@ -14,11 +14,10 @@
#include <linux/of.h>
#include <linux/err.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-
#include "crmregs-imx3.h"
#include "clk.h"
+#include "common.h"
+#include "hardware.h"
struct arm_ahb_div {
unsigned char arm, ahb, sel;
@@ -226,9 +225,9 @@
clk_register_clkdev(clk[fec_gate], NULL, "imx27-fec.0");
clk_register_clkdev(clk[gpt_gate], "per", "imx-gpt.0");
clk_register_clkdev(clk[ipg], "ipg", "imx-gpt.0");
- clk_register_clkdev(clk[i2c1_gate], NULL, "imx-i2c.0");
- clk_register_clkdev(clk[i2c2_gate], NULL, "imx-i2c.1");
- clk_register_clkdev(clk[i2c3_gate], NULL, "imx-i2c.2");
+ clk_register_clkdev(clk[i2c1_gate], NULL, "imx21-i2c.0");
+ clk_register_clkdev(clk[i2c2_gate], NULL, "imx21-i2c.1");
+ clk_register_clkdev(clk[i2c3_gate], NULL, "imx21-i2c.2");
clk_register_clkdev(clk[ipu_gate], NULL, "ipu-core");
clk_register_clkdev(clk[ipu_gate], NULL, "mx3_sdc_fb");
clk_register_clkdev(clk[kpp_gate], NULL, "imx-keypad");
@@ -256,7 +255,7 @@
clk_register_clkdev(clk[ipg], "ipg", "fsl-usb2-udc");
clk_register_clkdev(clk[usbotg_gate], "ahb", "fsl-usb2-udc");
clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0");
- clk_register_clkdev(clk[nfc_div], NULL, "mxc_nand.0");
+ clk_register_clkdev(clk[nfc_div], NULL, "imx25-nand.0");
clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0");
clk_prepare_enable(clk[spba_gate]);
diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c
index a0bf848..abb71f6 100644
--- a/arch/arm/mach-imx/clk-imx51-imx53.c
+++ b/arch/arm/mach-imx/clk-imx51-imx53.c
@@ -14,11 +14,10 @@
#include <linux/of.h>
#include <linux/err.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-
#include "crm-regs-imx5.h"
#include "clk.h"
+#include "common.h"
+#include "hardware.h"
/* Low-power Audio Playback Mode clock */
static const char *lp_apm_sel[] = { "osc", };
@@ -258,8 +257,8 @@
clk_register_clkdev(clk[cspi_ipg_gate], NULL, "imx35-cspi.2");
clk_register_clkdev(clk[pwm1_ipg_gate], "pwm", "mxc_pwm.0");
clk_register_clkdev(clk[pwm2_ipg_gate], "pwm", "mxc_pwm.1");
- clk_register_clkdev(clk[i2c1_gate], NULL, "imx-i2c.0");
- clk_register_clkdev(clk[i2c2_gate], NULL, "imx-i2c.1");
+ clk_register_clkdev(clk[i2c1_gate], NULL, "imx21-i2c.0");
+ clk_register_clkdev(clk[i2c2_gate], NULL, "imx21-i2c.1");
clk_register_clkdev(clk[usboh3_per_gate], "per", "mxc-ehci.0");
clk_register_clkdev(clk[usboh3_gate], "ipg", "mxc-ehci.0");
clk_register_clkdev(clk[usboh3_gate], "ahb", "mxc-ehci.0");
@@ -272,7 +271,7 @@
clk_register_clkdev(clk[usboh3_per_gate], "per", "fsl-usb2-udc");
clk_register_clkdev(clk[usboh3_gate], "ipg", "fsl-usb2-udc");
clk_register_clkdev(clk[usboh3_gate], "ahb", "fsl-usb2-udc");
- clk_register_clkdev(clk[nfc_gate], NULL, "mxc_nand");
+ clk_register_clkdev(clk[nfc_gate], NULL, "imx51-nand");
clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "imx-ssi.0");
clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "imx-ssi.1");
clk_register_clkdev(clk[ssi3_ipg_gate], NULL, "imx-ssi.2");
@@ -345,7 +344,7 @@
mx5_clocks_common_init(rate_ckil, rate_osc, rate_ckih1, rate_ckih2);
- clk_register_clkdev(clk[hsi2c_gate], NULL, "imx-i2c.2");
+ clk_register_clkdev(clk[hsi2c_gate], NULL, "imx21-i2c.2");
clk_register_clkdev(clk[mx51_mipi], "mipi_hsp", NULL);
clk_register_clkdev(clk[vpu_gate], NULL, "imx51-vpu.0");
clk_register_clkdev(clk[fec_gate], NULL, "imx27-fec.0");
@@ -440,7 +439,7 @@
mx5_clocks_common_init(rate_ckil, rate_osc, rate_ckih1, rate_ckih2);
clk_register_clkdev(clk[vpu_gate], NULL, "imx53-vpu.0");
- clk_register_clkdev(clk[i2c3_gate], NULL, "imx-i2c.2");
+ clk_register_clkdev(clk[i2c3_gate], NULL, "imx21-i2c.2");
clk_register_clkdev(clk[fec_gate], NULL, "imx25-fec.0");
clk_register_clkdev(clk[ipu_gate], "bus", "imx53-ipu");
clk_register_clkdev(clk[ipu_di0_gate], "di0", "imx53-ipu");
diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index 3ec242f..e5a82bb 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -19,8 +19,9 @@
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
-#include <mach/common.h>
+
#include "clk.h"
+#include "common.h"
#define CCGR0 0x68
#define CCGR1 0x6c
diff --git a/arch/arm/mach-imx/clk-pllv1.c b/arch/arm/mach-imx/clk-pllv1.c
index 02be731..abff350 100644
--- a/arch/arm/mach-imx/clk-pllv1.c
+++ b/arch/arm/mach-imx/clk-pllv1.c
@@ -4,10 +4,10 @@
#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/err.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
#include "clk.h"
+#include "common.h"
+#include "hardware.h"
/**
* pll v1
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/mach-imx/common.h
similarity index 98%
rename from arch/arm/plat-mxc/include/mach/common.h
rename to arch/arm/mach-imx/common.h
index ead9018..ef8db6b 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/mach-imx/common.h
@@ -79,6 +79,7 @@
extern int mx53_revision(void);
extern int mx53_display_revision(void);
extern void imx_set_aips(void __iomem *);
+extern int mxc_device_init(void);
enum mxc_cpu_pwr_mode {
WAIT_CLOCKED, /* wfi only */
diff --git a/arch/arm/mach-imx/cpu-imx25.c b/arch/arm/mach-imx/cpu-imx25.c
index 6914bcb..96ec64b 100644
--- a/arch/arm/mach-imx/cpu-imx25.c
+++ b/arch/arm/mach-imx/cpu-imx25.c
@@ -11,8 +11,9 @@
*/
#include <linux/module.h>
#include <linux/io.h>
-#include <mach/hardware.h>
-#include <mach/iim.h>
+
+#include "iim.h"
+#include "hardware.h"
static int mx25_cpu_rev = -1;
diff --git a/arch/arm/mach-imx/cpu-imx27.c b/arch/arm/mach-imx/cpu-imx27.c
index ff38e15..fe8d36f 100644
--- a/arch/arm/mach-imx/cpu-imx27.c
+++ b/arch/arm/mach-imx/cpu-imx27.c
@@ -24,7 +24,7 @@
#include <linux/io.h>
#include <linux/module.h>
-#include <mach/hardware.h>
+#include "hardware.h"
static int mx27_cpu_rev = -1;
static int mx27_cpu_partnumber;
diff --git a/arch/arm/mach-imx/cpu-imx31.c b/arch/arm/mach-imx/cpu-imx31.c
index 3f2345f..fde1860 100644
--- a/arch/arm/mach-imx/cpu-imx31.c
+++ b/arch/arm/mach-imx/cpu-imx31.c
@@ -11,9 +11,10 @@
#include <linux/module.h>
#include <linux/io.h>
-#include <mach/hardware.h>
-#include <mach/iim.h>
-#include <mach/common.h>
+
+#include "common.h"
+#include "hardware.h"
+#include "iim.h"
static int mx31_cpu_rev = -1;
diff --git a/arch/arm/mach-imx/cpu-imx35.c b/arch/arm/mach-imx/cpu-imx35.c
index 846e46e..ec3aaa0 100644
--- a/arch/arm/mach-imx/cpu-imx35.c
+++ b/arch/arm/mach-imx/cpu-imx35.c
@@ -10,8 +10,9 @@
*/
#include <linux/module.h>
#include <linux/io.h>
-#include <mach/hardware.h>
-#include <mach/iim.h>
+
+#include "hardware.h"
+#include "iim.h"
static int mx35_cpu_rev = -1;
diff --git a/arch/arm/mach-imx/cpu-imx5.c b/arch/arm/mach-imx/cpu-imx5.c
index 8eb15a2..d887600 100644
--- a/arch/arm/mach-imx/cpu-imx5.c
+++ b/arch/arm/mach-imx/cpu-imx5.c
@@ -15,9 +15,10 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/module.h>
-#include <mach/hardware.h>
#include <linux/io.h>
+#include "hardware.h"
+
static int mx5_cpu_rev = -1;
#define IIM_SREV 0x24
diff --git a/arch/arm/plat-mxc/cpu.c b/arch/arm/mach-imx/cpu.c
similarity index 97%
rename from arch/arm/plat-mxc/cpu.c
rename to arch/arm/mach-imx/cpu.c
index 220dd6f..03fcbd0 100644
--- a/arch/arm/plat-mxc/cpu.c
+++ b/arch/arm/mach-imx/cpu.c
@@ -1,7 +1,8 @@
#include <linux/module.h>
#include <linux/io.h>
-#include <mach/hardware.h>
+
+#include "hardware.h"
unsigned int __mxc_cpu_type;
EXPORT_SYMBOL(__mxc_cpu_type);
diff --git a/arch/arm/mach-imx/cpu_op-mx51.c b/arch/arm/mach-imx/cpu_op-mx51.c
index 7b92cd6..b9ef692 100644
--- a/arch/arm/mach-imx/cpu_op-mx51.c
+++ b/arch/arm/mach-imx/cpu_op-mx51.c
@@ -13,9 +13,10 @@
#include <linux/bug.h>
#include <linux/types.h>
-#include <mach/hardware.h>
#include <linux/kernel.h>
+#include "hardware.h"
+
static struct cpu_op mx51_cpu_op[] = {
{
.cpu_rate = 160000000,},
diff --git a/arch/arm/plat-mxc/cpufreq.c b/arch/arm/mach-imx/cpufreq.c
similarity index 99%
rename from arch/arm/plat-mxc/cpufreq.c
rename to arch/arm/mach-imx/cpufreq.c
index b5b6f80..36e8b39 100644
--- a/arch/arm/plat-mxc/cpufreq.c
+++ b/arch/arm/mach-imx/cpufreq.c
@@ -22,7 +22,8 @@
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/slab.h>
-#include <mach/hardware.h>
+
+#include "hardware.h"
#define CLK32_FREQ 32768
#define NANOSECOND (1000 * 1000 * 1000)
diff --git a/arch/arm/plat-mxc/cpuidle.c b/arch/arm/mach-imx/cpuidle.c
similarity index 100%
rename from arch/arm/plat-mxc/cpuidle.c
rename to arch/arm/mach-imx/cpuidle.c
diff --git a/arch/arm/plat-mxc/include/mach/cpuidle.h b/arch/arm/mach-imx/cpuidle.h
similarity index 100%
rename from arch/arm/plat-mxc/include/mach/cpuidle.h
rename to arch/arm/mach-imx/cpuidle.h
diff --git a/arch/arm/mach-imx/devices-imx1.h b/arch/arm/mach-imx/devices-imx1.h
index 3aad1e7..f9b5afc 100644
--- a/arch/arm/mach-imx/devices-imx1.h
+++ b/arch/arm/mach-imx/devices-imx1.h
@@ -6,8 +6,7 @@
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
-#include <mach/mx1.h>
-#include <mach/devices-common.h>
+#include "devices/devices-common.h"
extern const struct imx_imx_fb_data imx1_imx_fb_data;
#define imx1_add_imx_fb(pdata) \
diff --git a/arch/arm/mach-imx/devices-imx21.h b/arch/arm/mach-imx/devices-imx21.h
index 93ece55..bd93932 100644
--- a/arch/arm/mach-imx/devices-imx21.h
+++ b/arch/arm/mach-imx/devices-imx21.h
@@ -6,8 +6,7 @@
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
-#include <mach/mx21.h>
-#include <mach/devices-common.h>
+#include "devices/devices-common.h"
extern const struct imx_imx21_hcd_data imx21_imx21_hcd_data;
#define imx21_add_imx21_hcd(pdata) \
diff --git a/arch/arm/mach-imx/devices-imx25.h b/arch/arm/mach-imx/devices-imx25.h
index f8e03dd..0d2922b 100644
--- a/arch/arm/mach-imx/devices-imx25.h
+++ b/arch/arm/mach-imx/devices-imx25.h
@@ -6,8 +6,7 @@
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
-#include <mach/mx25.h>
-#include <mach/devices-common.h>
+#include "devices/devices-common.h"
extern const struct imx_fec_data imx25_fec_data;
#define imx25_add_fec(pdata) \
diff --git a/arch/arm/mach-imx/devices-imx27.h b/arch/arm/mach-imx/devices-imx27.h
index 04822932..8a1ad79 100644
--- a/arch/arm/mach-imx/devices-imx27.h
+++ b/arch/arm/mach-imx/devices-imx27.h
@@ -6,8 +6,7 @@
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
-#include <mach/mx27.h>
-#include <mach/devices-common.h>
+#include "devices/devices-common.h"
extern const struct imx_fec_data imx27_fec_data;
#define imx27_add_fec(pdata) \
diff --git a/arch/arm/mach-imx/devices-imx31.h b/arch/arm/mach-imx/devices-imx31.h
index 8b2ceb4..e8d1611 100644
--- a/arch/arm/mach-imx/devices-imx31.h
+++ b/arch/arm/mach-imx/devices-imx31.h
@@ -6,8 +6,7 @@
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
-#include <mach/mx31.h>
-#include <mach/devices-common.h>
+#include "devices/devices-common.h"
extern const struct imx_fsl_usb2_udc_data imx31_fsl_usb2_udc_data;
#define imx31_add_fsl_usb2_udc(pdata) \
diff --git a/arch/arm/mach-imx/devices-imx35.h b/arch/arm/mach-imx/devices-imx35.h
index c3e9f20..e2675f1 100644
--- a/arch/arm/mach-imx/devices-imx35.h
+++ b/arch/arm/mach-imx/devices-imx35.h
@@ -6,8 +6,7 @@
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
-#include <mach/mx35.h>
-#include <mach/devices-common.h>
+#include "devices/devices-common.h"
extern const struct imx_fec_data imx35_fec_data;
#define imx35_add_fec(pdata) \
diff --git a/arch/arm/mach-imx/devices-imx50.h b/arch/arm/mach-imx/devices-imx50.h
index 7216667..2c29039 100644
--- a/arch/arm/mach-imx/devices-imx50.h
+++ b/arch/arm/mach-imx/devices-imx50.h
@@ -18,8 +18,7 @@
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/
-#include <mach/mx50.h>
-#include <mach/devices-common.h>
+#include "devices/devices-common.h"
extern const struct imx_imx_uart_1irq_data imx50_imx_uart_data[];
#define imx50_add_imx_uart(id, pdata) \
diff --git a/arch/arm/mach-imx/devices-imx51.h b/arch/arm/mach-imx/devices-imx51.h
index 9f17187..deee5ba 100644
--- a/arch/arm/mach-imx/devices-imx51.h
+++ b/arch/arm/mach-imx/devices-imx51.h
@@ -6,8 +6,7 @@
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
-#include <mach/mx51.h>
-#include <mach/devices-common.h>
+#include "devices/devices-common.h"
extern const struct imx_fec_data imx51_fec_data;
#define imx51_add_fec(pdata) \
diff --git a/arch/arm/plat-mxc/devices/Kconfig b/arch/arm/mach-imx/devices/Kconfig
similarity index 100%
rename from arch/arm/plat-mxc/devices/Kconfig
rename to arch/arm/mach-imx/devices/Kconfig
diff --git a/arch/arm/plat-mxc/devices/Makefile b/arch/arm/mach-imx/devices/Makefile
similarity index 98%
rename from arch/arm/plat-mxc/devices/Makefile
rename to arch/arm/mach-imx/devices/Makefile
index 76f3195..2abe2a5 100644
--- a/arch/arm/plat-mxc/devices/Makefile
+++ b/arch/arm/mach-imx/devices/Makefile
@@ -1,3 +1,5 @@
+obj-y := devices.o
+
obj-$(CONFIG_IMX_HAVE_PLATFORM_FEC) += platform-fec.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_FLEXCAN) += platform-flexcan.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_FSL_USB2_UDC) += platform-fsl-usb2-udc.o
diff --git a/arch/arm/plat-mxc/include/mach/devices-common.h b/arch/arm/mach-imx/devices/devices-common.h
similarity index 97%
rename from arch/arm/plat-mxc/include/mach/devices-common.h
rename to arch/arm/mach-imx/devices/devices-common.h
index eaf79d2..e4b790b 100644
--- a/arch/arm/plat-mxc/include/mach/devices-common.h
+++ b/arch/arm/mach-imx/devices/devices-common.h
@@ -108,6 +108,7 @@
#include <linux/platform_data/video-imxfb.h>
struct imx_imx_fb_data {
+ const char *devid;
resource_size_t iobase;
resource_size_t iosize;
resource_size_t irq;
@@ -118,6 +119,7 @@
#include <linux/platform_data/i2c-imx.h>
struct imx_imx_i2c_data {
+ const char *devid;
int id;
resource_size_t iobase;
resource_size_t iosize;
@@ -219,6 +221,7 @@
#include <linux/platform_data/camera-mx2.h>
struct imx_mx2_camera_data {
+ const char *devid;
resource_size_t iobasecsi;
resource_size_t iosizecsi;
resource_size_t irqcsi;
@@ -244,6 +247,7 @@
#include <linux/platform_data/mmc-mxcmmc.h>
struct imx_mxc_mmc_data {
+ const char *devid;
int id;
resource_size_t iobase;
resource_size_t iosize;
@@ -256,6 +260,7 @@
#include <linux/platform_data/mtd-mxc_nand.h>
struct imx_mxc_nand_data {
+ const char *devid;
/*
* id is traditionally 0, but -1 is more appropriate. We use -1 for new
* machines but don't change existing devices as the nand device usually
@@ -290,6 +295,7 @@
/* mxc_rtc */
struct imx_mxc_rtc_data {
+ const char *devid;
resource_size_t iobase;
resource_size_t irq;
};
@@ -326,7 +332,8 @@
const struct imx_spi_imx_data *data,
const struct spi_imx_master *pdata);
-struct platform_device *imx_add_imx_dma(void);
+struct platform_device *imx_add_imx_dma(char *name, resource_size_t iobase,
+ int irq, int irq_err);
struct platform_device *imx_add_imx_sdma(char *name,
resource_size_t iobase, int irq, struct sdma_platform_data *pdata);
diff --git a/arch/arm/plat-mxc/devices.c b/arch/arm/mach-imx/devices/devices.c
similarity index 92%
rename from arch/arm/plat-mxc/devices.c
rename to arch/arm/mach-imx/devices/devices.c
index 4d55a7a..1b37482 100644
--- a/arch/arm/plat-mxc/devices.c
+++ b/arch/arm/mach-imx/devices/devices.c
@@ -21,7 +21,6 @@
#include <linux/init.h>
#include <linux/err.h>
#include <linux/platform_device.h>
-#include <mach/common.h>
struct device mxc_aips_bus = {
.init_name = "mxc_aips",
@@ -33,7 +32,7 @@
.parent = &platform_bus,
};
-static int __init mxc_device_init(void)
+int __init mxc_device_init(void)
{
int ret;
@@ -46,4 +45,3 @@
done:
return ret;
}
-core_initcall(mxc_device_init);
diff --git a/arch/arm/plat-mxc/devices/platform-ahci-imx.c b/arch/arm/mach-imx/devices/platform-ahci-imx.c
similarity index 98%
rename from arch/arm/plat-mxc/devices/platform-ahci-imx.c
rename to arch/arm/mach-imx/devices/platform-ahci-imx.c
index ade4a1c..3d87dd9 100644
--- a/arch/arm/plat-mxc/devices/platform-ahci-imx.c
+++ b/arch/arm/mach-imx/devices/platform-ahci-imx.c
@@ -24,8 +24,9 @@
#include <linux/device.h>
#include <linux/dma-mapping.h>
#include <asm/sizes.h>
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
+
+#include "../hardware.h"
+#include "devices-common.h"
#define imx_ahci_imx_data_entry_single(soc, _devid) \
{ \
diff --git a/arch/arm/plat-mxc/devices/platform-fec.c b/arch/arm/mach-imx/devices/platform-fec.c
similarity index 96%
rename from arch/arm/plat-mxc/devices/platform-fec.c
rename to arch/arm/mach-imx/devices/platform-fec.c
index 0bae44e..2cb188a 100644
--- a/arch/arm/plat-mxc/devices/platform-fec.c
+++ b/arch/arm/mach-imx/devices/platform-fec.c
@@ -8,8 +8,9 @@
*/
#include <linux/dma-mapping.h>
#include <asm/sizes.h>
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
+
+#include "../hardware.h"
+#include "devices-common.h"
#define imx_fec_data_entry_single(soc, _devid) \
{ \
diff --git a/arch/arm/plat-mxc/devices/platform-flexcan.c b/arch/arm/mach-imx/devices/platform-flexcan.c
similarity index 96%
rename from arch/arm/plat-mxc/devices/platform-flexcan.c
rename to arch/arm/mach-imx/devices/platform-flexcan.c
index 4e8497a..1078bf0 100644
--- a/arch/arm/plat-mxc/devices/platform-flexcan.c
+++ b/arch/arm/mach-imx/devices/platform-flexcan.c
@@ -5,8 +5,8 @@
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
+#include "../hardware.h"
+#include "devices-common.h"
#define imx_flexcan_data_entry_single(soc, _id, _hwid, _size) \
{ \
diff --git a/arch/arm/plat-mxc/devices/platform-fsl-usb2-udc.c b/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c
similarity index 96%
rename from arch/arm/plat-mxc/devices/platform-fsl-usb2-udc.c
rename to arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c
index 848038f..37e4439 100644
--- a/arch/arm/plat-mxc/devices/platform-fsl-usb2-udc.c
+++ b/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c
@@ -7,8 +7,9 @@
* Free Software Foundation.
*/
#include <linux/dma-mapping.h>
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
+
+#include "../hardware.h"
+#include "devices-common.h"
#define imx_fsl_usb2_udc_data_entry_single(soc) \
{ \
diff --git a/arch/arm/plat-mxc/devices/platform-gpio-mxc.c b/arch/arm/mach-imx/devices/platform-gpio-mxc.c
similarity index 95%
rename from arch/arm/plat-mxc/devices/platform-gpio-mxc.c
rename to arch/arm/mach-imx/devices/platform-gpio-mxc.c
index a7919a2..26483fa 100644
--- a/arch/arm/plat-mxc/devices/platform-gpio-mxc.c
+++ b/arch/arm/mach-imx/devices/platform-gpio-mxc.c
@@ -6,7 +6,7 @@
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
-#include <mach/devices-common.h>
+#include "devices-common.h"
struct platform_device *__init mxc_register_gpio(char *name, int id,
resource_size_t iobase, resource_size_t iosize, int irq, int irq_high)
diff --git a/arch/arm/plat-mxc/devices/platform-gpio_keys.c b/arch/arm/mach-imx/devices/platform-gpio_keys.c
similarity index 94%
rename from arch/arm/plat-mxc/devices/platform-gpio_keys.c
rename to arch/arm/mach-imx/devices/platform-gpio_keys.c
index 1c53a53..4862825 100644
--- a/arch/arm/plat-mxc/devices/platform-gpio_keys.c
+++ b/arch/arm/mach-imx/devices/platform-gpio_keys.c
@@ -16,8 +16,9 @@
* Boston, MA 02110-1301, USA.
*/
#include <asm/sizes.h>
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
+
+#include "../hardware.h"
+#include "devices-common.h"
struct platform_device *__init imx_add_gpio_keys(
const struct gpio_keys_platform_data *pdata)
diff --git a/arch/arm/plat-mxc/devices/platform-imx-dma.c b/arch/arm/mach-imx/devices/platform-imx-dma.c
similarity index 63%
rename from arch/arm/plat-mxc/devices/platform-imx-dma.c
rename to arch/arm/mach-imx/devices/platform-imx-dma.c
index 7fa7e9c..ccdb5dc 100644
--- a/arch/arm/plat-mxc/devices/platform-imx-dma.c
+++ b/arch/arm/mach-imx/devices/platform-imx-dma.c
@@ -6,12 +6,29 @@
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
-#include <mach/devices-common.h>
+#include "devices-common.h"
-struct platform_device __init __maybe_unused *imx_add_imx_dma(void)
+struct platform_device __init __maybe_unused *imx_add_imx_dma(char *name,
+ resource_size_t iobase, int irq, int irq_err)
{
+ struct resource res[] = {
+ {
+ .start = iobase,
+ .end = iobase + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = irq,
+ .end = irq,
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .start = irq_err,
+ .end = irq_err,
+ .flags = IORESOURCE_IRQ,
+ },
+ };
+
return platform_device_register_resndata(&mxc_ahb_bus,
- "imx-dma", -1, NULL, 0, NULL, 0);
+ name, -1, res, ARRAY_SIZE(res), NULL, 0);
}
struct platform_device __init __maybe_unused *imx_add_imx_sdma(char *name,
diff --git a/arch/arm/plat-mxc/devices/platform-imx-fb.c b/arch/arm/mach-imx/devices/platform-imx-fb.c
similarity index 79%
rename from arch/arm/plat-mxc/devices/platform-imx-fb.c
rename to arch/arm/mach-imx/devices/platform-imx-fb.c
index 2b0b5e0..10b0ed3 100644
--- a/arch/arm/plat-mxc/devices/platform-imx-fb.c
+++ b/arch/arm/mach-imx/devices/platform-imx-fb.c
@@ -7,11 +7,13 @@
* Free Software Foundation.
*/
#include <linux/dma-mapping.h>
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
-#define imx_imx_fb_data_entry_single(soc, _size) \
+#include "../hardware.h"
+#include "devices-common.h"
+
+#define imx_imx_fb_data_entry_single(soc, _devid, _size) \
{ \
+ .devid = _devid, \
.iobase = soc ## _LCDC_BASE_ADDR, \
.iosize = _size, \
.irq = soc ## _INT_LCDC, \
@@ -19,22 +21,22 @@
#ifdef CONFIG_SOC_IMX1
const struct imx_imx_fb_data imx1_imx_fb_data __initconst =
- imx_imx_fb_data_entry_single(MX1, SZ_4K);
+ imx_imx_fb_data_entry_single(MX1, "imx1-fb", SZ_4K);
#endif /* ifdef CONFIG_SOC_IMX1 */
#ifdef CONFIG_SOC_IMX21
const struct imx_imx_fb_data imx21_imx_fb_data __initconst =
- imx_imx_fb_data_entry_single(MX21, SZ_4K);
+ imx_imx_fb_data_entry_single(MX21, "imx21-fb", SZ_4K);
#endif /* ifdef CONFIG_SOC_IMX21 */
#ifdef CONFIG_SOC_IMX25
const struct imx_imx_fb_data imx25_imx_fb_data __initconst =
- imx_imx_fb_data_entry_single(MX25, SZ_16K);
+ imx_imx_fb_data_entry_single(MX25, "imx21-fb", SZ_16K);
#endif /* ifdef CONFIG_SOC_IMX25 */
#ifdef CONFIG_SOC_IMX27
const struct imx_imx_fb_data imx27_imx_fb_data __initconst =
- imx_imx_fb_data_entry_single(MX27, SZ_4K);
+ imx_imx_fb_data_entry_single(MX27, "imx21-fb", SZ_4K);
#endif /* ifdef CONFIG_SOC_IMX27 */
struct platform_device *__init imx_add_imx_fb(
diff --git a/arch/arm/plat-mxc/devices/platform-imx-i2c.c b/arch/arm/mach-imx/devices/platform-imx-i2c.c
similarity index 76%
rename from arch/arm/plat-mxc/devices/platform-imx-i2c.c
rename to arch/arm/mach-imx/devices/platform-imx-i2c.c
index 19ad580..8e30e57 100644
--- a/arch/arm/plat-mxc/devices/platform-imx-i2c.c
+++ b/arch/arm/mach-imx/devices/platform-imx-i2c.c
@@ -6,34 +6,35 @@
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
+#include "../hardware.h"
+#include "devices-common.h"
-#define imx_imx_i2c_data_entry_single(soc, _id, _hwid, _size) \
+#define imx_imx_i2c_data_entry_single(soc, _devid, _id, _hwid, _size) \
{ \
+ .devid = _devid, \
.id = _id, \
.iobase = soc ## _I2C ## _hwid ## _BASE_ADDR, \
.iosize = _size, \
.irq = soc ## _INT_I2C ## _hwid, \
}
-#define imx_imx_i2c_data_entry(soc, _id, _hwid, _size) \
- [_id] = imx_imx_i2c_data_entry_single(soc, _id, _hwid, _size)
+#define imx_imx_i2c_data_entry(soc, _devid, _id, _hwid, _size) \
+ [_id] = imx_imx_i2c_data_entry_single(soc, _devid, _id, _hwid, _size)
#ifdef CONFIG_SOC_IMX1
const struct imx_imx_i2c_data imx1_imx_i2c_data __initconst =
- imx_imx_i2c_data_entry_single(MX1, 0, , SZ_4K);
+ imx_imx_i2c_data_entry_single(MX1, "imx1-i2c", 0, , SZ_4K);
#endif /* ifdef CONFIG_SOC_IMX1 */
#ifdef CONFIG_SOC_IMX21
const struct imx_imx_i2c_data imx21_imx_i2c_data __initconst =
- imx_imx_i2c_data_entry_single(MX21, 0, , SZ_4K);
+ imx_imx_i2c_data_entry_single(MX21, "imx21-i2c", 0, , SZ_4K);
#endif /* ifdef CONFIG_SOC_IMX21 */
#ifdef CONFIG_SOC_IMX25
const struct imx_imx_i2c_data imx25_imx_i2c_data[] __initconst = {
#define imx25_imx_i2c_data_entry(_id, _hwid) \
- imx_imx_i2c_data_entry(MX25, _id, _hwid, SZ_16K)
+ imx_imx_i2c_data_entry(MX25, "imx21-i2c", _id, _hwid, SZ_16K)
imx25_imx_i2c_data_entry(0, 1),
imx25_imx_i2c_data_entry(1, 2),
imx25_imx_i2c_data_entry(2, 3),
@@ -43,7 +44,7 @@
#ifdef CONFIG_SOC_IMX27
const struct imx_imx_i2c_data imx27_imx_i2c_data[] __initconst = {
#define imx27_imx_i2c_data_entry(_id, _hwid) \
- imx_imx_i2c_data_entry(MX27, _id, _hwid, SZ_4K)
+ imx_imx_i2c_data_entry(MX27, "imx21-i2c", _id, _hwid, SZ_4K)
imx27_imx_i2c_data_entry(0, 1),
imx27_imx_i2c_data_entry(1, 2),
};
@@ -52,7 +53,7 @@
#ifdef CONFIG_SOC_IMX31
const struct imx_imx_i2c_data imx31_imx_i2c_data[] __initconst = {
#define imx31_imx_i2c_data_entry(_id, _hwid) \
- imx_imx_i2c_data_entry(MX31, _id, _hwid, SZ_4K)
+ imx_imx_i2c_data_entry(MX31, "imx21-i2c", _id, _hwid, SZ_4K)
imx31_imx_i2c_data_entry(0, 1),
imx31_imx_i2c_data_entry(1, 2),
imx31_imx_i2c_data_entry(2, 3),
@@ -62,7 +63,7 @@
#ifdef CONFIG_SOC_IMX35
const struct imx_imx_i2c_data imx35_imx_i2c_data[] __initconst = {
#define imx35_imx_i2c_data_entry(_id, _hwid) \
- imx_imx_i2c_data_entry(MX35, _id, _hwid, SZ_4K)
+ imx_imx_i2c_data_entry(MX35, "imx21-i2c", _id, _hwid, SZ_4K)
imx35_imx_i2c_data_entry(0, 1),
imx35_imx_i2c_data_entry(1, 2),
imx35_imx_i2c_data_entry(2, 3),
@@ -72,7 +73,7 @@
#ifdef CONFIG_SOC_IMX50
const struct imx_imx_i2c_data imx50_imx_i2c_data[] __initconst = {
#define imx50_imx_i2c_data_entry(_id, _hwid) \
- imx_imx_i2c_data_entry(MX50, _id, _hwid, SZ_4K)
+ imx_imx_i2c_data_entry(MX50, "imx21-i2c", _id, _hwid, SZ_4K)
imx50_imx_i2c_data_entry(0, 1),
imx50_imx_i2c_data_entry(1, 2),
imx50_imx_i2c_data_entry(2, 3),
@@ -82,10 +83,11 @@
#ifdef CONFIG_SOC_IMX51
const struct imx_imx_i2c_data imx51_imx_i2c_data[] __initconst = {
#define imx51_imx_i2c_data_entry(_id, _hwid) \
- imx_imx_i2c_data_entry(MX51, _id, _hwid, SZ_4K)
+ imx_imx_i2c_data_entry(MX51, "imx21-i2c", _id, _hwid, SZ_4K)
imx51_imx_i2c_data_entry(0, 1),
imx51_imx_i2c_data_entry(1, 2),
{
+ .devid = "imx21-i2c",
.id = 2,
.iobase = MX51_HSI2C_DMA_BASE_ADDR,
.iosize = SZ_16K,
@@ -97,7 +99,7 @@
#ifdef CONFIG_SOC_IMX53
const struct imx_imx_i2c_data imx53_imx_i2c_data[] __initconst = {
#define imx53_imx_i2c_data_entry(_id, _hwid) \
- imx_imx_i2c_data_entry(MX53, _id, _hwid, SZ_4K)
+ imx_imx_i2c_data_entry(MX53, "imx21-i2c", _id, _hwid, SZ_4K)
imx53_imx_i2c_data_entry(0, 1),
imx53_imx_i2c_data_entry(1, 2),
imx53_imx_i2c_data_entry(2, 3),
@@ -120,7 +122,7 @@
},
};
- return imx_add_platform_device("imx-i2c", data->id,
+ return imx_add_platform_device(data->devid, data->id,
res, ARRAY_SIZE(res),
pdata, sizeof(*pdata));
}
diff --git a/arch/arm/plat-mxc/devices/platform-imx-keypad.c b/arch/arm/mach-imx/devices/platform-imx-keypad.c
similarity index 96%
rename from arch/arm/plat-mxc/devices/platform-imx-keypad.c
rename to arch/arm/mach-imx/devices/platform-imx-keypad.c
index 479c3e9..8f22a4c 100644
--- a/arch/arm/plat-mxc/devices/platform-imx-keypad.c
+++ b/arch/arm/mach-imx/devices/platform-imx-keypad.c
@@ -6,8 +6,8 @@
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
+#include "../hardware.h"
+#include "devices-common.h"
#define imx_imx_keypad_data_entry_single(soc, _size) \
{ \
diff --git a/arch/arm/plat-mxc/devices/platform-imx-ssi.c b/arch/arm/mach-imx/devices/platform-imx-ssi.c
similarity index 98%
rename from arch/arm/plat-mxc/devices/platform-imx-ssi.c
rename to arch/arm/mach-imx/devices/platform-imx-ssi.c
index 21c6f30..bfcb8f3 100644
--- a/arch/arm/plat-mxc/devices/platform-imx-ssi.c
+++ b/arch/arm/mach-imx/devices/platform-imx-ssi.c
@@ -6,8 +6,8 @@
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
+#include "../hardware.h"
+#include "devices-common.h"
#define imx_imx_ssi_data_entry(soc, _id, _hwid, _size) \
[_id] = { \
diff --git a/arch/arm/plat-mxc/devices/platform-imx-uart.c b/arch/arm/mach-imx/devices/platform-imx-uart.c
similarity index 98%
rename from arch/arm/plat-mxc/devices/platform-imx-uart.c
rename to arch/arm/mach-imx/devices/platform-imx-uart.c
index d390f00..67bf866 100644
--- a/arch/arm/plat-mxc/devices/platform-imx-uart.c
+++ b/arch/arm/mach-imx/devices/platform-imx-uart.c
@@ -6,8 +6,8 @@
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
+#include "../hardware.h"
+#include "devices-common.h"
#define imx_imx_uart_3irq_data_entry(soc, _id, _hwid, _size) \
[_id] = { \
diff --git a/arch/arm/plat-mxc/devices/platform-imx2-wdt.c b/arch/arm/mach-imx/devices/platform-imx2-wdt.c
similarity index 97%
rename from arch/arm/plat-mxc/devices/platform-imx2-wdt.c
rename to arch/arm/mach-imx/devices/platform-imx2-wdt.c
index 5e07ef2..ec75d64 100644
--- a/arch/arm/plat-mxc/devices/platform-imx2-wdt.c
+++ b/arch/arm/mach-imx/devices/platform-imx2-wdt.c
@@ -7,8 +7,9 @@
* Free Software Foundation.
*/
#include <asm/sizes.h>
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
+
+#include "../hardware.h"
+#include "devices-common.h"
#define imx_imx2_wdt_data_entry_single(soc, _id, _hwid, _size) \
{ \
diff --git a/arch/arm/plat-mxc/devices/platform-imx21-hcd.c b/arch/arm/mach-imx/devices/platform-imx21-hcd.c
similarity index 94%
rename from arch/arm/plat-mxc/devices/platform-imx21-hcd.c
rename to arch/arm/mach-imx/devices/platform-imx21-hcd.c
index 5770a42..30c8161 100644
--- a/arch/arm/plat-mxc/devices/platform-imx21-hcd.c
+++ b/arch/arm/mach-imx/devices/platform-imx21-hcd.c
@@ -6,8 +6,8 @@
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
+#include "../hardware.h"
+#include "devices-common.h"
#define imx_imx21_hcd_data_entry_single(soc) \
{ \
diff --git a/arch/arm/plat-mxc/devices/platform-imx27-coda.c b/arch/arm/mach-imx/devices/platform-imx27-coda.c
similarity index 93%
rename from arch/arm/plat-mxc/devices/platform-imx27-coda.c
rename to arch/arm/mach-imx/devices/platform-imx27-coda.c
index 8b12aac..25bebc2 100644
--- a/arch/arm/plat-mxc/devices/platform-imx27-coda.c
+++ b/arch/arm/mach-imx/devices/platform-imx27-coda.c
@@ -7,8 +7,8 @@
* Free Software Foundation.
*/
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
+#include "../hardware.h"
+#include "devices-common.h"
#ifdef CONFIG_SOC_IMX27
const struct imx_imx27_coda_data imx27_coda_data __initconst = {
diff --git a/arch/arm/plat-mxc/devices/platform-imx_udc.c b/arch/arm/mach-imx/devices/platform-imx_udc.c
similarity index 96%
rename from arch/arm/plat-mxc/devices/platform-imx_udc.c
rename to arch/arm/mach-imx/devices/platform-imx_udc.c
index 6fd675d..5ced7e4 100644
--- a/arch/arm/plat-mxc/devices/platform-imx_udc.c
+++ b/arch/arm/mach-imx/devices/platform-imx_udc.c
@@ -6,8 +6,8 @@
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
+#include "../hardware.h"
+#include "devices-common.h"
#define imx_imx_udc_data_entry_single(soc, _size) \
{ \
diff --git a/arch/arm/plat-mxc/devices/platform-imxdi_rtc.c b/arch/arm/mach-imx/devices/platform-imxdi_rtc.c
similarity index 94%
rename from arch/arm/plat-mxc/devices/platform-imxdi_rtc.c
rename to arch/arm/mach-imx/devices/platform-imxdi_rtc.c
index 805336f..5bb490d 100644
--- a/arch/arm/plat-mxc/devices/platform-imxdi_rtc.c
+++ b/arch/arm/mach-imx/devices/platform-imxdi_rtc.c
@@ -7,8 +7,9 @@
* Free Software Foundation.
*/
#include <asm/sizes.h>
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
+
+#include "../hardware.h"
+#include "devices-common.h"
#define imx_imxdi_rtc_data_entry_single(soc) \
{ \
diff --git a/arch/arm/plat-mxc/devices/platform-ipu-core.c b/arch/arm/mach-imx/devices/platform-ipu-core.c
similarity index 97%
rename from arch/arm/plat-mxc/devices/platform-ipu-core.c
rename to arch/arm/mach-imx/devices/platform-ipu-core.c
index d1e33cc..fc4dd7c 100644
--- a/arch/arm/plat-mxc/devices/platform-ipu-core.c
+++ b/arch/arm/mach-imx/devices/platform-ipu-core.c
@@ -7,8 +7,9 @@
* Free Software Foundation.
*/
#include <linux/dma-mapping.h>
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
+
+#include "../hardware.h"
+#include "devices-common.h"
#define imx_ipu_core_entry_single(soc) \
{ \
diff --git a/arch/arm/plat-mxc/devices/platform-mx1-camera.c b/arch/arm/mach-imx/devices/platform-mx1-camera.c
similarity index 94%
rename from arch/arm/plat-mxc/devices/platform-mx1-camera.c
rename to arch/arm/mach-imx/devices/platform-mx1-camera.c
index edcc581..2c67881 100644
--- a/arch/arm/plat-mxc/devices/platform-mx1-camera.c
+++ b/arch/arm/mach-imx/devices/platform-mx1-camera.c
@@ -6,8 +6,8 @@
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
+#include "../hardware.h"
+#include "devices-common.h"
#define imx_mx1_camera_data_entry_single(soc, _size) \
{ \
diff --git a/arch/arm/plat-mxc/devices/platform-mx2-camera.c b/arch/arm/mach-imx/devices/platform-mx2-camera.c
similarity index 83%
rename from arch/arm/plat-mxc/devices/platform-mx2-camera.c
rename to arch/arm/mach-imx/devices/platform-mx2-camera.c
index 11eace9..f491016 100644
--- a/arch/arm/plat-mxc/devices/platform-mx2-camera.c
+++ b/arch/arm/mach-imx/devices/platform-mx2-camera.c
@@ -6,17 +6,19 @@
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
+#include "../hardware.h"
+#include "devices-common.h"
-#define imx_mx2_camera_data_entry_single(soc) \
+#define imx_mx2_camera_data_entry_single(soc, _devid) \
{ \
+ .devid = _devid, \
.iobasecsi = soc ## _CSI_BASE_ADDR, \
.iosizecsi = SZ_4K, \
.irqcsi = soc ## _INT_CSI, \
}
-#define imx_mx2_camera_data_entry_single_emma(soc) \
+#define imx_mx2_camera_data_entry_single_emma(soc, _devid) \
{ \
+ .devid = _devid, \
.iobasecsi = soc ## _CSI_BASE_ADDR, \
.iosizecsi = SZ_32, \
.irqcsi = soc ## _INT_CSI, \
@@ -27,12 +29,12 @@
#ifdef CONFIG_SOC_IMX25
const struct imx_mx2_camera_data imx25_mx2_camera_data __initconst =
- imx_mx2_camera_data_entry_single(MX25);
+ imx_mx2_camera_data_entry_single(MX25, "imx25-camera");
#endif /* ifdef CONFIG_SOC_IMX25 */
#ifdef CONFIG_SOC_IMX27
const struct imx_mx2_camera_data imx27_mx2_camera_data __initconst =
- imx_mx2_camera_data_entry_single_emma(MX27);
+ imx_mx2_camera_data_entry_single_emma(MX27, "imx27-camera");
#endif /* ifdef CONFIG_SOC_IMX27 */
struct platform_device *__init imx_add_mx2_camera(
@@ -58,7 +60,7 @@
.flags = IORESOURCE_IRQ,
},
};
- return imx_add_platform_device_dmamask("mx2-camera", 0,
+ return imx_add_platform_device_dmamask(data->devid, 0,
res, data->iobaseemmaprp ? 4 : 2,
pdata, sizeof(*pdata), DMA_BIT_MASK(32));
}
diff --git a/arch/arm/plat-mxc/devices/platform-mxc-ehci.c b/arch/arm/mach-imx/devices/platform-mxc-ehci.c
similarity index 97%
rename from arch/arm/plat-mxc/devices/platform-mxc-ehci.c
rename to arch/arm/mach-imx/devices/platform-mxc-ehci.c
index 35851d8..5d4bbbf 100644
--- a/arch/arm/plat-mxc/devices/platform-mxc-ehci.c
+++ b/arch/arm/mach-imx/devices/platform-mxc-ehci.c
@@ -7,8 +7,9 @@
* Free Software Foundation.
*/
#include <linux/dma-mapping.h>
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
+
+#include "../hardware.h"
+#include "devices-common.h"
#define imx_mxc_ehci_data_entry_single(soc, _id, hs) \
{ \
diff --git a/arch/arm/plat-mxc/devices/platform-mxc-mmc.c b/arch/arm/mach-imx/devices/platform-mxc-mmc.c
similarity index 74%
rename from arch/arm/plat-mxc/devices/platform-mxc-mmc.c
rename to arch/arm/mach-imx/devices/platform-mxc-mmc.c
index 540d3a7..b8203c7 100644
--- a/arch/arm/plat-mxc/devices/platform-mxc-mmc.c
+++ b/arch/arm/mach-imx/devices/platform-mxc-mmc.c
@@ -7,24 +7,26 @@
* Free Software Foundation.
*/
#include <linux/dma-mapping.h>
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
-#define imx_mxc_mmc_data_entry_single(soc, _id, _hwid, _size) \
+#include "../hardware.h"
+#include "devices-common.h"
+
+#define imx_mxc_mmc_data_entry_single(soc, _devid, _id, _hwid, _size) \
{ \
+ .devid = _devid, \
.id = _id, \
.iobase = soc ## _SDHC ## _hwid ## _BASE_ADDR, \
.iosize = _size, \
.irq = soc ## _INT_SDHC ## _hwid, \
.dmareq = soc ## _DMA_REQ_SDHC ## _hwid, \
}
-#define imx_mxc_mmc_data_entry(soc, _id, _hwid, _size) \
- [_id] = imx_mxc_mmc_data_entry_single(soc, _id, _hwid, _size)
+#define imx_mxc_mmc_data_entry(soc, _devid, _id, _hwid, _size) \
+ [_id] = imx_mxc_mmc_data_entry_single(soc, _devid, _id, _hwid, _size)
#ifdef CONFIG_SOC_IMX21
const struct imx_mxc_mmc_data imx21_mxc_mmc_data[] __initconst = {
#define imx21_mxc_mmc_data_entry(_id, _hwid) \
- imx_mxc_mmc_data_entry(MX21, _id, _hwid, SZ_4K)
+ imx_mxc_mmc_data_entry(MX21, "imx21-mmc", _id, _hwid, SZ_4K)
imx21_mxc_mmc_data_entry(0, 1),
imx21_mxc_mmc_data_entry(1, 2),
};
@@ -33,7 +35,7 @@
#ifdef CONFIG_SOC_IMX27
const struct imx_mxc_mmc_data imx27_mxc_mmc_data[] __initconst = {
#define imx27_mxc_mmc_data_entry(_id, _hwid) \
- imx_mxc_mmc_data_entry(MX27, _id, _hwid, SZ_4K)
+ imx_mxc_mmc_data_entry(MX27, "imx21-mmc", _id, _hwid, SZ_4K)
imx27_mxc_mmc_data_entry(0, 1),
imx27_mxc_mmc_data_entry(1, 2),
};
@@ -42,7 +44,7 @@
#ifdef CONFIG_SOC_IMX31
const struct imx_mxc_mmc_data imx31_mxc_mmc_data[] __initconst = {
#define imx31_mxc_mmc_data_entry(_id, _hwid) \
- imx_mxc_mmc_data_entry(MX31, _id, _hwid, SZ_16K)
+ imx_mxc_mmc_data_entry(MX31, "imx31-mmc", _id, _hwid, SZ_16K)
imx31_mxc_mmc_data_entry(0, 1),
imx31_mxc_mmc_data_entry(1, 2),
};
@@ -55,7 +57,7 @@
struct resource res[] = {
{
.start = data->iobase,
- .end = data->iobase + SZ_4K - 1,
+ .end = data->iobase + data->iosize - 1,
.flags = IORESOURCE_MEM,
}, {
.start = data->irq,
@@ -67,7 +69,7 @@
.flags = IORESOURCE_DMA,
},
};
- return imx_add_platform_device_dmamask("mxc-mmc", data->id,
+ return imx_add_platform_device_dmamask(data->devid, data->id,
res, ARRAY_SIZE(res),
pdata, sizeof(*pdata), DMA_BIT_MASK(32));
}
diff --git a/arch/arm/plat-mxc/devices/platform-mxc_nand.c b/arch/arm/mach-imx/devices/platform-mxc_nand.c
similarity index 74%
rename from arch/arm/plat-mxc/devices/platform-mxc_nand.c
rename to arch/arm/mach-imx/devices/platform-mxc_nand.c
index 95b75cc..7af1c53 100644
--- a/arch/arm/plat-mxc/devices/platform-mxc_nand.c
+++ b/arch/arm/mach-imx/devices/platform-mxc_nand.c
@@ -7,18 +7,21 @@
* Free Software Foundation.
*/
#include <asm/sizes.h>
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
-#define imx_mxc_nand_data_entry_single(soc, _size) \
+#include "../hardware.h"
+#include "devices-common.h"
+
+#define imx_mxc_nand_data_entry_single(soc, _devid, _size) \
{ \
+ .devid = _devid, \
.iobase = soc ## _NFC_BASE_ADDR, \
.iosize = _size, \
.irq = soc ## _INT_NFC \
}
-#define imx_mxc_nandv3_data_entry_single(soc, _size) \
+#define imx_mxc_nandv3_data_entry_single(soc, _devid, _size) \
{ \
+ .devid = _devid, \
.id = -1, \
.iobase = soc ## _NFC_BASE_ADDR, \
.iosize = _size, \
@@ -28,32 +31,32 @@
#ifdef CONFIG_SOC_IMX21
const struct imx_mxc_nand_data imx21_mxc_nand_data __initconst =
- imx_mxc_nand_data_entry_single(MX21, SZ_4K);
+ imx_mxc_nand_data_entry_single(MX21, "imx21-nand", SZ_4K);
#endif /* ifdef CONFIG_SOC_IMX21 */
#ifdef CONFIG_SOC_IMX25
const struct imx_mxc_nand_data imx25_mxc_nand_data __initconst =
- imx_mxc_nand_data_entry_single(MX25, SZ_8K);
+ imx_mxc_nand_data_entry_single(MX25, "imx25-nand", SZ_8K);
#endif /* ifdef CONFIG_SOC_IMX25 */
#ifdef CONFIG_SOC_IMX27
const struct imx_mxc_nand_data imx27_mxc_nand_data __initconst =
- imx_mxc_nand_data_entry_single(MX27, SZ_4K);
+ imx_mxc_nand_data_entry_single(MX27, "imx27-nand", SZ_4K);
#endif /* ifdef CONFIG_SOC_IMX27 */
#ifdef CONFIG_SOC_IMX31
const struct imx_mxc_nand_data imx31_mxc_nand_data __initconst =
- imx_mxc_nand_data_entry_single(MX31, SZ_4K);
+ imx_mxc_nand_data_entry_single(MX31, "imx27-nand", SZ_4K);
#endif
#ifdef CONFIG_SOC_IMX35
const struct imx_mxc_nand_data imx35_mxc_nand_data __initconst =
- imx_mxc_nand_data_entry_single(MX35, SZ_8K);
+ imx_mxc_nand_data_entry_single(MX35, "imx25-nand", SZ_8K);
#endif
#ifdef CONFIG_SOC_IMX51
const struct imx_mxc_nand_data imx51_mxc_nand_data __initconst =
- imx_mxc_nandv3_data_entry_single(MX51, SZ_16K);
+ imx_mxc_nandv3_data_entry_single(MX51, "imx51-nand", SZ_16K);
#endif
struct platform_device *__init imx_add_mxc_nand(
@@ -76,7 +79,7 @@
.flags = IORESOURCE_MEM,
},
};
- return imx_add_platform_device("mxc_nand", data->id,
+ return imx_add_platform_device(data->devid, data->id,
res, ARRAY_SIZE(res) - !data->axibase,
pdata, sizeof(*pdata));
}
diff --git a/arch/arm/plat-mxc/devices/platform-mxc_pwm.c b/arch/arm/mach-imx/devices/platform-mxc_pwm.c
similarity index 96%
rename from arch/arm/plat-mxc/devices/platform-mxc_pwm.c
rename to arch/arm/mach-imx/devices/platform-mxc_pwm.c
index b0c4ae2..dcd2897 100644
--- a/arch/arm/plat-mxc/devices/platform-mxc_pwm.c
+++ b/arch/arm/mach-imx/devices/platform-mxc_pwm.c
@@ -6,8 +6,8 @@
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
+#include "../hardware.h"
+#include "devices-common.h"
#define imx_mxc_pwm_data_entry_single(soc, _id, _hwid, _size) \
{ \
diff --git a/arch/arm/plat-mxc/devices/platform-mxc_rnga.c b/arch/arm/mach-imx/devices/platform-mxc_rnga.c
similarity index 95%
rename from arch/arm/plat-mxc/devices/platform-mxc_rnga.c
rename to arch/arm/mach-imx/devices/platform-mxc_rnga.c
index b4b7612..c58404b 100644
--- a/arch/arm/plat-mxc/devices/platform-mxc_rnga.c
+++ b/arch/arm/mach-imx/devices/platform-mxc_rnga.c
@@ -6,8 +6,8 @@
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
+#include "../hardware.h"
+#include "devices-common.h"
struct imx_mxc_rnga_data {
resource_size_t iobase;
diff --git a/arch/arm/plat-mxc/devices/platform-mxc_rtc.c b/arch/arm/mach-imx/devices/platform-mxc_rtc.c
similarity index 77%
rename from arch/arm/plat-mxc/devices/platform-mxc_rtc.c
rename to arch/arm/mach-imx/devices/platform-mxc_rtc.c
index a5c9ad5..c7fffaa 100644
--- a/arch/arm/plat-mxc/devices/platform-mxc_rtc.c
+++ b/arch/arm/mach-imx/devices/platform-mxc_rtc.c
@@ -6,23 +6,24 @@
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
+#include "../hardware.h"
+#include "devices-common.h"
-#define imx_mxc_rtc_data_entry_single(soc) \
+#define imx_mxc_rtc_data_entry_single(soc, _devid) \
{ \
+ .devid = _devid, \
.iobase = soc ## _RTC_BASE_ADDR, \
.irq = soc ## _INT_RTC, \
}
#ifdef CONFIG_SOC_IMX31
const struct imx_mxc_rtc_data imx31_mxc_rtc_data __initconst =
- imx_mxc_rtc_data_entry_single(MX31);
+ imx_mxc_rtc_data_entry_single(MX31, "imx21-rtc");
#endif /* ifdef CONFIG_SOC_IMX31 */
#ifdef CONFIG_SOC_IMX35
const struct imx_mxc_rtc_data imx35_mxc_rtc_data __initconst =
- imx_mxc_rtc_data_entry_single(MX35);
+ imx_mxc_rtc_data_entry_single(MX35, "imx21-rtc");
#endif /* ifdef CONFIG_SOC_IMX35 */
struct platform_device *__init imx_add_mxc_rtc(
@@ -40,6 +41,6 @@
},
};
- return imx_add_platform_device("mxc_rtc", -1,
+ return imx_add_platform_device(data->devid, -1,
res, ARRAY_SIZE(res), NULL, 0);
}
diff --git a/arch/arm/plat-mxc/devices/platform-mxc_w1.c b/arch/arm/mach-imx/devices/platform-mxc_w1.c
similarity index 95%
rename from arch/arm/plat-mxc/devices/platform-mxc_w1.c
rename to arch/arm/mach-imx/devices/platform-mxc_w1.c
index 96fa5ea..88c18b7 100644
--- a/arch/arm/plat-mxc/devices/platform-mxc_w1.c
+++ b/arch/arm/mach-imx/devices/platform-mxc_w1.c
@@ -6,8 +6,8 @@
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
+#include "../hardware.h"
+#include "devices-common.h"
#define imx_mxc_w1_data_entry_single(soc) \
{ \
diff --git a/arch/arm/plat-mxc/devices/platform-pata_imx.c b/arch/arm/mach-imx/devices/platform-pata_imx.c
similarity index 96%
rename from arch/arm/plat-mxc/devices/platform-pata_imx.c
rename to arch/arm/mach-imx/devices/platform-pata_imx.c
index 70e2f2a..e4ec11c 100644
--- a/arch/arm/plat-mxc/devices/platform-pata_imx.c
+++ b/arch/arm/mach-imx/devices/platform-pata_imx.c
@@ -3,8 +3,8 @@
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
+#include "../hardware.h"
+#include "devices-common.h"
#define imx_pata_imx_data_entry_single(soc, _size) \
{ \
diff --git a/arch/arm/plat-mxc/devices/platform-sdhci-esdhc-imx.c b/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c
similarity index 97%
rename from arch/arm/plat-mxc/devices/platform-sdhci-esdhc-imx.c
rename to arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c
index 3793e47..e66a4e3 100644
--- a/arch/arm/plat-mxc/devices/platform-sdhci-esdhc-imx.c
+++ b/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c
@@ -6,10 +6,11 @@
* Free Software Foundation.
*/
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
#include <linux/platform_data/mmc-esdhc-imx.h>
+#include "../hardware.h"
+#include "devices-common.h"
+
#define imx_sdhci_esdhc_imx_data_entry_single(soc, _devid, _id, hwid) \
{ \
.devid = _devid, \
diff --git a/arch/arm/plat-mxc/devices/platform-spi_imx.c b/arch/arm/mach-imx/devices/platform-spi_imx.c
similarity index 98%
rename from arch/arm/plat-mxc/devices/platform-spi_imx.c
rename to arch/arm/mach-imx/devices/platform-spi_imx.c
index 9c50c14..8880bcb 100644
--- a/arch/arm/plat-mxc/devices/platform-spi_imx.c
+++ b/arch/arm/mach-imx/devices/platform-spi_imx.c
@@ -6,8 +6,8 @@
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
+#include "../hardware.h"
+#include "devices-common.h"
#define imx_spi_imx_data_entry_single(soc, type, _devid, _id, hwid, _size) \
{ \
diff --git a/arch/arm/mach-imx/ehci-imx25.c b/arch/arm/mach-imx/ehci-imx25.c
index 412c583..134c190 100644
--- a/arch/arm/mach-imx/ehci-imx25.c
+++ b/arch/arm/mach-imx/ehci-imx25.c
@@ -15,10 +15,10 @@
#include <linux/platform_device.h>
#include <linux/io.h>
-
-#include <mach/hardware.h>
#include <linux/platform_data/usb-ehci-mxc.h>
+#include "hardware.h"
+
#define USBCTRL_OTGBASE_OFFSET 0x600
#define MX25_OTG_SIC_SHIFT 29
@@ -30,7 +30,7 @@
#define MX25_H1_SIC_SHIFT 21
#define MX25_H1_SIC_MASK (0x3 << MX25_H1_SIC_SHIFT)
#define MX25_H1_PP_BIT (1 << 18)
-#define MX25_H1_PM_BIT (1 << 8)
+#define MX25_H1_PM_BIT (1 << 16)
#define MX25_H1_IPPUE_UP_BIT (1 << 7)
#define MX25_H1_IPPUE_DOWN_BIT (1 << 6)
#define MX25_H1_TLL_BIT (1 << 5)
diff --git a/arch/arm/mach-imx/ehci-imx27.c b/arch/arm/mach-imx/ehci-imx27.c
index cd6e1f8..448d911 100644
--- a/arch/arm/mach-imx/ehci-imx27.c
+++ b/arch/arm/mach-imx/ehci-imx27.c
@@ -15,10 +15,10 @@
#include <linux/platform_device.h>
#include <linux/io.h>
-
-#include <mach/hardware.h>
#include <linux/platform_data/usb-ehci-mxc.h>
+#include "hardware.h"
+
#define USBCTRL_OTGBASE_OFFSET 0x600
#define MX27_OTG_SIC_SHIFT 29
diff --git a/arch/arm/mach-imx/ehci-imx31.c b/arch/arm/mach-imx/ehci-imx31.c
index 9a880c7..05de4e1 100644
--- a/arch/arm/mach-imx/ehci-imx31.c
+++ b/arch/arm/mach-imx/ehci-imx31.c
@@ -15,10 +15,10 @@
#include <linux/platform_device.h>
#include <linux/io.h>
-
-#include <mach/hardware.h>
#include <linux/platform_data/usb-ehci-mxc.h>
+#include "hardware.h"
+
#define USBCTRL_OTGBASE_OFFSET 0x600
#define MX31_OTG_SIC_SHIFT 29
diff --git a/arch/arm/mach-imx/ehci-imx35.c b/arch/arm/mach-imx/ehci-imx35.c
index 779e16e..554e7cc 100644
--- a/arch/arm/mach-imx/ehci-imx35.c
+++ b/arch/arm/mach-imx/ehci-imx35.c
@@ -15,10 +15,10 @@
#include <linux/platform_device.h>
#include <linux/io.h>
-
-#include <mach/hardware.h>
#include <linux/platform_data/usb-ehci-mxc.h>
+#include "hardware.h"
+
#define USBCTRL_OTGBASE_OFFSET 0x600
#define MX35_OTG_SIC_SHIFT 29
@@ -30,7 +30,7 @@
#define MX35_H1_SIC_SHIFT 21
#define MX35_H1_SIC_MASK (0x3 << MX35_H1_SIC_SHIFT)
#define MX35_H1_PP_BIT (1 << 18)
-#define MX35_H1_PM_BIT (1 << 8)
+#define MX35_H1_PM_BIT (1 << 16)
#define MX35_H1_IPPUE_UP_BIT (1 << 7)
#define MX35_H1_IPPUE_DOWN_BIT (1 << 6)
#define MX35_H1_TLL_BIT (1 << 5)
diff --git a/arch/arm/mach-imx/ehci-imx5.c b/arch/arm/mach-imx/ehci-imx5.c
index cf8d00e..e49710b 100644
--- a/arch/arm/mach-imx/ehci-imx5.c
+++ b/arch/arm/mach-imx/ehci-imx5.c
@@ -15,10 +15,10 @@
#include <linux/platform_device.h>
#include <linux/io.h>
-
-#include <mach/hardware.h>
#include <linux/platform_data/usb-ehci-mxc.h>
+#include "hardware.h"
+
#define MXC_OTG_OFFSET 0
#define MXC_H1_OFFSET 0x200
#define MXC_H2_OFFSET 0x400
diff --git a/arch/arm/plat-mxc/epit.c b/arch/arm/mach-imx/epit.c
similarity index 98%
rename from arch/arm/plat-mxc/epit.c
rename to arch/arm/mach-imx/epit.c
index 88726f4..04a5961 100644
--- a/arch/arm/plat-mxc/epit.c
+++ b/arch/arm/mach-imx/epit.c
@@ -51,10 +51,10 @@
#include <linux/clockchips.h>
#include <linux/clk.h>
#include <linux/err.h>
-
-#include <mach/hardware.h>
#include <asm/mach/time.h>
-#include <mach/common.h>
+
+#include "common.h"
+#include "hardware.h"
static struct clock_event_device clockevent_epit;
static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED;
diff --git a/arch/arm/plat-mxc/include/mach/eukrea-baseboards.h b/arch/arm/mach-imx/eukrea-baseboards.h
similarity index 100%
rename from arch/arm/plat-mxc/include/mach/eukrea-baseboards.h
rename to arch/arm/mach-imx/eukrea-baseboards.h
diff --git a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
index 98aef57..b4c7002 100644
--- a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
+++ b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
@@ -29,11 +29,10 @@
#include <asm/mach/arch.h>
-#include <mach/common.h>
-#include <mach/iomux-mx27.h>
-#include <mach/hardware.h>
-
+#include "common.h"
#include "devices-imx27.h"
+#include "hardware.h"
+#include "iomux-mx27.h"
static const int eukrea_mbimx27_pins[] __initconst = {
/* UART2 */
diff --git a/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c
index 0b84666..e2b70f4c 100644
--- a/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c
+++ b/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c
@@ -26,14 +26,14 @@
#include <linux/spi/spi.h>
#include <video/platform_lcd.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx25.h>
-#include <mach/common.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <mach/mx25.h>
+#include "common.h"
#include "devices-imx25.h"
+#include "hardware.h"
+#include "iomux-mx25.h"
+#include "mx25.h"
static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = {
/* LCD */
diff --git a/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c
index c6532a0..5a2d5ef 100644
--- a/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c
+++ b/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c
@@ -36,11 +36,10 @@
#include <asm/mach/time.h>
#include <asm/mach/map.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/iomux-mx35.h>
-
+#include "common.h"
#include "devices-imx35.h"
+#include "hardware.h"
+#include "iomux-mx35.h"
static const struct fb_videomode fb_modedb[] = {
{
diff --git a/arch/arm/mach-imx/eukrea_mbimxsd51-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd51-baseboard.c
index 8b0de30..9be6c1e 100644
--- a/arch/arm/mach-imx/eukrea_mbimxsd51-baseboard.c
+++ b/arch/arm/mach-imx/eukrea_mbimxsd51-baseboard.c
@@ -36,11 +36,10 @@
#include <asm/mach/time.h>
#include <asm/mach/map.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/iomux-mx51.h>
-
+#include "common.h"
#include "devices-imx51.h"
+#include "hardware.h"
+#include "iomux-mx51.h"
static iomux_v3_cfg_t eukrea_mbimxsd51_pads[] = {
/* LED */
diff --git a/arch/arm/plat-mxc/include/mach/hardware.h b/arch/arm/mach-imx/hardware.h
similarity index 93%
rename from arch/arm/plat-mxc/include/mach/hardware.h
rename to arch/arm/mach-imx/hardware.h
index ebf1065..3ce7fa3 100644
--- a/arch/arm/plat-mxc/include/mach/hardware.h
+++ b/arch/arm/mach-imx/hardware.h
@@ -105,20 +105,20 @@
#define IMX_IO_ADDRESS(x) IOMEM(IMX_IO_P2V(x))
-#include <mach/mxc.h>
+#include "mxc.h"
-#include <mach/mx6q.h>
-#include <mach/mx50.h>
-#include <mach/mx51.h>
-#include <mach/mx53.h>
-#include <mach/mx3x.h>
-#include <mach/mx31.h>
-#include <mach/mx35.h>
-#include <mach/mx2x.h>
-#include <mach/mx21.h>
-#include <mach/mx27.h>
-#include <mach/mx1.h>
-#include <mach/mx25.h>
+#include "mx6q.h"
+#include "mx50.h"
+#include "mx51.h"
+#include "mx53.h"
+#include "mx3x.h"
+#include "mx31.h"
+#include "mx35.h"
+#include "mx2x.h"
+#include "mx21.h"
+#include "mx27.h"
+#include "mx1.h"
+#include "mx25.h"
#define imx_map_entry(soc, name, _type) { \
.virtual = soc ## _IO_P2V(soc ## _ ## name ## _BASE_ADDR), \
diff --git a/arch/arm/mach-imx/hotplug.c b/arch/arm/mach-imx/hotplug.c
index b07b778..3dec962 100644
--- a/arch/arm/mach-imx/hotplug.c
+++ b/arch/arm/mach-imx/hotplug.c
@@ -13,7 +13,8 @@
#include <linux/errno.h>
#include <asm/cacheflush.h>
#include <asm/cp15.h>
-#include <mach/common.h>
+
+#include "common.h"
static inline void cpu_enter_lowpower(void)
{
diff --git a/arch/arm/plat-mxc/include/mach/iim.h b/arch/arm/mach-imx/iim.h
similarity index 100%
rename from arch/arm/plat-mxc/include/mach/iim.h
rename to arch/arm/mach-imx/iim.h
diff --git a/arch/arm/mach-imx/imx27-dt.c b/arch/arm/mach-imx/imx27-dt.c
index e80d523..ebfae96 100644
--- a/arch/arm/mach-imx/imx27-dt.c
+++ b/arch/arm/mach-imx/imx27-dt.c
@@ -14,21 +14,22 @@
#include <linux/of_platform.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
-#include <mach/common.h>
-#include <mach/mx27.h>
+
+#include "common.h"
+#include "mx27.h"
static const struct of_dev_auxdata imx27_auxdata_lookup[] __initconst = {
OF_DEV_AUXDATA("fsl,imx27-uart", MX27_UART1_BASE_ADDR, "imx21-uart.0", NULL),
OF_DEV_AUXDATA("fsl,imx27-uart", MX27_UART2_BASE_ADDR, "imx21-uart.1", NULL),
OF_DEV_AUXDATA("fsl,imx27-uart", MX27_UART3_BASE_ADDR, "imx21-uart.2", NULL),
OF_DEV_AUXDATA("fsl,imx27-fec", MX27_FEC_BASE_ADDR, "imx27-fec.0", NULL),
- OF_DEV_AUXDATA("fsl,imx27-i2c", MX27_I2C1_BASE_ADDR, "imx-i2c.0", NULL),
- OF_DEV_AUXDATA("fsl,imx27-i2c", MX27_I2C2_BASE_ADDR, "imx-i2c.1", NULL),
+ OF_DEV_AUXDATA("fsl,imx27-i2c", MX27_I2C1_BASE_ADDR, "imx21-i2c.0", NULL),
+ OF_DEV_AUXDATA("fsl,imx27-i2c", MX27_I2C2_BASE_ADDR, "imx21-i2c.1", NULL),
OF_DEV_AUXDATA("fsl,imx27-cspi", MX27_CSPI1_BASE_ADDR, "imx27-cspi.0", NULL),
OF_DEV_AUXDATA("fsl,imx27-cspi", MX27_CSPI2_BASE_ADDR, "imx27-cspi.1", NULL),
OF_DEV_AUXDATA("fsl,imx27-cspi", MX27_CSPI3_BASE_ADDR, "imx27-cspi.2", NULL),
OF_DEV_AUXDATA("fsl,imx27-wdt", MX27_WDOG_BASE_ADDR, "imx2-wdt.0", NULL),
- OF_DEV_AUXDATA("fsl,imx27-nand", MX27_NFC_BASE_ADDR, "mxc_nand.0", NULL),
+ OF_DEV_AUXDATA("fsl,imx27-nand", MX27_NFC_BASE_ADDR, "imx27-nand.0", NULL),
{ /* sentinel */ }
};
diff --git a/arch/arm/mach-imx/imx31-dt.c b/arch/arm/mach-imx/imx31-dt.c
index a68ba20..af476de 100644
--- a/arch/arm/mach-imx/imx31-dt.c
+++ b/arch/arm/mach-imx/imx31-dt.c
@@ -14,8 +14,9 @@
#include <linux/of_platform.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
-#include <mach/common.h>
-#include <mach/mx31.h>
+
+#include "common.h"
+#include "mx31.h"
static const struct of_dev_auxdata imx31_auxdata_lookup[] __initconst = {
OF_DEV_AUXDATA("fsl,imx31-uart", MX31_UART1_BASE_ADDR,
diff --git a/arch/arm/mach-imx/imx51-dt.c b/arch/arm/mach-imx/imx51-dt.c
index f233b4b..5074299 100644
--- a/arch/arm/mach-imx/imx51-dt.c
+++ b/arch/arm/mach-imx/imx51-dt.c
@@ -15,8 +15,9 @@
#include <linux/of_platform.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
-#include <mach/common.h>
-#include <mach/mx51.h>
+
+#include "common.h"
+#include "mx51.h"
/*
* Lookup table for attaching a specific name and platform_data pointer to
@@ -36,8 +37,8 @@
OF_DEV_AUXDATA("fsl,imx51-ecspi", MX51_ECSPI1_BASE_ADDR, "imx51-ecspi.0", NULL),
OF_DEV_AUXDATA("fsl,imx51-ecspi", MX51_ECSPI2_BASE_ADDR, "imx51-ecspi.1", NULL),
OF_DEV_AUXDATA("fsl,imx51-cspi", MX51_CSPI_BASE_ADDR, "imx35-cspi.0", NULL),
- OF_DEV_AUXDATA("fsl,imx51-i2c", MX51_I2C1_BASE_ADDR, "imx-i2c.0", NULL),
- OF_DEV_AUXDATA("fsl,imx51-i2c", MX51_I2C2_BASE_ADDR, "imx-i2c.1", NULL),
+ OF_DEV_AUXDATA("fsl,imx51-i2c", MX51_I2C1_BASE_ADDR, "imx21-i2c.0", NULL),
+ OF_DEV_AUXDATA("fsl,imx51-i2c", MX51_I2C2_BASE_ADDR, "imx21-i2c.1", NULL),
OF_DEV_AUXDATA("fsl,imx51-sdma", MX51_SDMA_BASE_ADDR, "imx35-sdma", NULL),
OF_DEV_AUXDATA("fsl,imx51-wdt", MX51_WDOG1_BASE_ADDR, "imx2-wdt.0", NULL),
{ /* sentinel */ }
diff --git a/arch/arm/mach-imx/include/mach/dma-mx1-mx2.h b/arch/arm/mach-imx/include/mach/dma-mx1-mx2.h
deleted file mode 100644
index df5f522..0000000
--- a/arch/arm/mach-imx/include/mach/dma-mx1-mx2.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef __MACH_DMA_MX1_MX2_H__
-#define __MACH_DMA_MX1_MX2_H__
-/*
- * Don't use this header in new code, it will go away when all users are
- * converted to mach/dma-v1.h
- */
-
-#include <mach/dma-v1.h>
-
-#endif /* ifndef __MACH_DMA_MX1_MX2_H__ */
diff --git a/arch/arm/mach-imx/iomux-imx31.c b/arch/arm/mach-imx/iomux-imx31.c
index 82bd440..cabefbc 100644
--- a/arch/arm/mach-imx/iomux-imx31.c
+++ b/arch/arm/mach-imx/iomux-imx31.c
@@ -22,8 +22,9 @@
#include <linux/spinlock.h>
#include <linux/io.h>
#include <linux/kernel.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx3.h>
+
+#include "hardware.h"
+#include "iomux-mx3.h"
/*
* IOMUX register (base) addresses
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx1.h b/arch/arm/mach-imx/iomux-mx1.h
similarity index 99%
rename from arch/arm/plat-mxc/include/mach/iomux-mx1.h
rename to arch/arm/mach-imx/iomux-mx1.h
index 6b1507c..95f4681d 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx1.h
+++ b/arch/arm/mach-imx/iomux-mx1.h
@@ -18,7 +18,7 @@
#ifndef __MACH_IOMUX_MX1_H__
#define __MACH_IOMUX_MX1_H__
-#include <mach/iomux-v1.h>
+#include "iomux-v1.h"
#define PA0_AIN_SPI2_CLK (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 0)
#define PA0_AF_ETMTRACESYNC (GPIO_PORTA | GPIO_AF | 0)
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx21.h b/arch/arm/mach-imx/iomux-mx21.h
similarity index 98%
rename from arch/arm/plat-mxc/include/mach/iomux-mx21.h
rename to arch/arm/mach-imx/iomux-mx21.h
index 1495dfd..a70cffc 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx21.h
+++ b/arch/arm/mach-imx/iomux-mx21.h
@@ -18,8 +18,8 @@
#ifndef __MACH_IOMUX_MX21_H__
#define __MACH_IOMUX_MX21_H__
-#include <mach/iomux-mx2x.h>
-#include <mach/iomux-v1.h>
+#include "iomux-mx2x.h"
+#include "iomux-v1.h"
/* Primary GPIO pin functions */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx25.h b/arch/arm/mach-imx/iomux-mx25.h
similarity index 99%
rename from arch/arm/plat-mxc/include/mach/iomux-mx25.h
rename to arch/arm/mach-imx/iomux-mx25.h
index c61ec0f..be51e83 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx25.h
+++ b/arch/arm/mach-imx/iomux-mx25.h
@@ -19,7 +19,7 @@
#ifndef __MACH_IOMUX_MX25_H__
#define __MACH_IOMUX_MX25_H__
-#include <mach/iomux-v3.h>
+#include "iomux-v3.h"
/*
* IOMUX/PAD Bit field definitions
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx27.h b/arch/arm/mach-imx/iomux-mx27.h
similarity index 99%
rename from arch/arm/plat-mxc/include/mach/iomux-mx27.h
rename to arch/arm/mach-imx/iomux-mx27.h
index d9f9a6e..218e99e 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx27.h
+++ b/arch/arm/mach-imx/iomux-mx27.h
@@ -19,8 +19,8 @@
#ifndef __MACH_IOMUX_MX27_H__
#define __MACH_IOMUX_MX27_H__
-#include <mach/iomux-mx2x.h>
-#include <mach/iomux-v1.h>
+#include "iomux-mx2x.h"
+#include "iomux-v1.h"
/* Primary GPIO pin functions */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx2x.h b/arch/arm/mach-imx/iomux-mx2x.h
similarity index 100%
rename from arch/arm/plat-mxc/include/mach/iomux-mx2x.h
rename to arch/arm/mach-imx/iomux-mx2x.h
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/mach-imx/iomux-mx3.h
similarity index 100%
rename from arch/arm/plat-mxc/include/mach/iomux-mx3.h
rename to arch/arm/mach-imx/iomux-mx3.h
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx35.h b/arch/arm/mach-imx/iomux-mx35.h
similarity index 99%
rename from arch/arm/plat-mxc/include/mach/iomux-mx35.h
rename to arch/arm/mach-imx/iomux-mx35.h
index 3117c18..90bfa6b 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx35.h
+++ b/arch/arm/mach-imx/iomux-mx35.h
@@ -19,7 +19,7 @@
#ifndef __MACH_IOMUX_MX35_H__
#define __MACH_IOMUX_MX35_H__
-#include <mach/iomux-v3.h>
+#include "iomux-v3.h"
/*
* The naming convention for the pad modes is MX35_PAD_<padname>__<padmode>
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx50.h b/arch/arm/mach-imx/iomux-mx50.h
similarity index 99%
rename from arch/arm/plat-mxc/include/mach/iomux-mx50.h
rename to arch/arm/mach-imx/iomux-mx50.h
index 98e7fd0..00f56e0 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx50.h
+++ b/arch/arm/mach-imx/iomux-mx50.h
@@ -19,7 +19,7 @@
#ifndef __MACH_IOMUX_MX50_H__
#define __MACH_IOMUX_MX50_H__
-#include <mach/iomux-v3.h>
+#include "iomux-v3.h"
#define MX50_ELCDIF_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_DSE_HIGH)
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx51.h b/arch/arm/mach-imx/iomux-mx51.h
similarity index 99%
rename from arch/arm/plat-mxc/include/mach/iomux-mx51.h
rename to arch/arm/mach-imx/iomux-mx51.h
index 2623e7a..75bbcc4 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx51.h
+++ b/arch/arm/mach-imx/iomux-mx51.h
@@ -13,7 +13,7 @@
#ifndef __MACH_IOMUX_MX51_H__
#define __MACH_IOMUX_MX51_H__
-#include <mach/iomux-v3.h>
+#include "iomux-v3.h"
#define __NA_ 0x000
diff --git a/arch/arm/plat-mxc/iomux-v1.c b/arch/arm/mach-imx/iomux-v1.c
similarity index 98%
rename from arch/arm/plat-mxc/iomux-v1.c
rename to arch/arm/mach-imx/iomux-v1.c
index 1f73963..2b156d1 100644
--- a/arch/arm/plat-mxc/iomux-v1.c
+++ b/arch/arm/mach-imx/iomux-v1.c
@@ -28,9 +28,10 @@
#include <linux/string.h>
#include <linux/gpio.h>
-#include <mach/hardware.h>
#include <asm/mach/map.h>
-#include <mach/iomux-v1.h>
+
+#include "hardware.h"
+#include "iomux-v1.h"
static void __iomem *imx_iomuxv1_baseaddr;
static unsigned imx_iomuxv1_numports;
diff --git a/arch/arm/plat-mxc/include/mach/iomux-v1.h b/arch/arm/mach-imx/iomux-v1.h
similarity index 100%
rename from arch/arm/plat-mxc/include/mach/iomux-v1.h
rename to arch/arm/mach-imx/iomux-v1.h
diff --git a/arch/arm/plat-mxc/iomux-v3.c b/arch/arm/mach-imx/iomux-v3.c
similarity index 97%
rename from arch/arm/plat-mxc/iomux-v3.c
rename to arch/arm/mach-imx/iomux-v3.c
index 99a9cdb..9dae74b 100644
--- a/arch/arm/plat-mxc/iomux-v3.c
+++ b/arch/arm/mach-imx/iomux-v3.c
@@ -25,9 +25,10 @@
#include <linux/string.h>
#include <linux/gpio.h>
-#include <mach/hardware.h>
#include <asm/mach/map.h>
-#include <mach/iomux-v3.h>
+
+#include "hardware.h"
+#include "iomux-v3.h"
static void __iomem *base;
diff --git a/arch/arm/plat-mxc/include/mach/iomux-v3.h b/arch/arm/mach-imx/iomux-v3.h
similarity index 100%
rename from arch/arm/plat-mxc/include/mach/iomux-v3.h
rename to arch/arm/mach-imx/iomux-v3.h
diff --git a/arch/arm/plat-mxc/include/mach/iram.h b/arch/arm/mach-imx/iram.h
similarity index 100%
rename from arch/arm/plat-mxc/include/mach/iram.h
rename to arch/arm/mach-imx/iram.h
diff --git a/arch/arm/plat-mxc/iram_alloc.c b/arch/arm/mach-imx/iram_alloc.c
similarity index 98%
rename from arch/arm/plat-mxc/iram_alloc.c
rename to arch/arm/mach-imx/iram_alloc.c
index 074c386..6c80424 100644
--- a/arch/arm/plat-mxc/iram_alloc.c
+++ b/arch/arm/mach-imx/iram_alloc.c
@@ -22,7 +22,8 @@
#include <linux/module.h>
#include <linux/spinlock.h>
#include <linux/genalloc.h>
-#include <mach/iram.h>
+
+#include "iram.h"
static unsigned long iram_phys_base;
static void __iomem *iram_virt_base;
diff --git a/arch/arm/plat-mxc/irq-common.c b/arch/arm/mach-imx/irq-common.c
similarity index 100%
rename from arch/arm/plat-mxc/irq-common.c
rename to arch/arm/mach-imx/irq-common.c
diff --git a/arch/arm/plat-mxc/irq-common.h b/arch/arm/mach-imx/irq-common.h
similarity index 94%
rename from arch/arm/plat-mxc/irq-common.h
rename to arch/arm/mach-imx/irq-common.h
index 6ccb3a1..5b2dabb 100644
--- a/arch/arm/plat-mxc/irq-common.h
+++ b/arch/arm/mach-imx/irq-common.h
@@ -19,6 +19,9 @@
#ifndef __PLAT_MXC_IRQ_COMMON_H__
#define __PLAT_MXC_IRQ_COMMON_H__
+/* all normal IRQs can be FIQs */
+#define FIQ_START 0
+
struct mxc_extra_irq
{
int (*set_priority)(unsigned char irq, unsigned char prio);
diff --git a/arch/arm/mach-imx/lluart.c b/arch/arm/mach-imx/lluart.c
index c40a34c..5f15103 100644
--- a/arch/arm/mach-imx/lluart.c
+++ b/arch/arm/mach-imx/lluart.c
@@ -14,7 +14,8 @@
#include <asm/page.h>
#include <asm/sizes.h>
#include <asm/mach/map.h>
-#include <mach/hardware.h>
+
+#include "hardware.h"
static struct map_desc imx_lluart_desc = {
#ifdef CONFIG_DEBUG_IMX6Q_UART2
diff --git a/arch/arm/mach-imx/mach-apf9328.c b/arch/arm/mach-imx/mach-apf9328.c
index 7b99a79..5c9bd2c 100644
--- a/arch/arm/mach-imx/mach-apf9328.c
+++ b/arch/arm/mach-imx/mach-apf9328.c
@@ -25,11 +25,10 @@
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx1.h>
-
+#include "common.h"
#include "devices-imx1.h"
+#include "hardware.h"
+#include "iomux-mx1.h"
static const int apf9328_pins[] __initconst = {
/* UART1 */
diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c
index 5985ed1..59bd6b0 100644
--- a/arch/arm/mach-imx/mach-armadillo5x0.c
+++ b/arch/arm/mach-imx/mach-armadillo5x0.c
@@ -41,19 +41,18 @@
#include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/memory.h>
#include <asm/mach/map.h>
-#include <mach/common.h>
-#include <mach/iomux-mx3.h>
-#include <mach/ulpi.h>
-
+#include "common.h"
#include "devices-imx31.h"
#include "crmregs-imx3.h"
+#include "hardware.h"
+#include "iomux-mx3.h"
+#include "ulpi.h"
static int armadillo5x0_pins[] = {
/* UART1 */
diff --git a/arch/arm/mach-imx/mach-bug.c b/arch/arm/mach-imx/mach-bug.c
index 9a98977..3a39d5a 100644
--- a/arch/arm/mach-imx/mach-bug.c
+++ b/arch/arm/mach-imx/mach-bug.c
@@ -19,15 +19,14 @@
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <mach/iomux-mx3.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-
#include <asm/mach/time.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
+#include "common.h"
#include "devices-imx31.h"
+#include "hardware.h"
+#include "iomux-mx3.h"
static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c
index 2bb9e18d..12a3706 100644
--- a/arch/arm/mach-imx/mach-cpuimx27.c
+++ b/arch/arm/mach-imx/mach-cpuimx27.c
@@ -34,13 +34,12 @@
#include <asm/mach/time.h>
#include <asm/mach/map.h>
-#include <mach/eukrea-baseboards.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx27.h>
-#include <mach/ulpi.h>
-
+#include "common.h"
#include "devices-imx27.h"
+#include "eukrea-baseboards.h"
+#include "hardware.h"
+#include "iomux-mx27.h"
+#include "ulpi.h"
static const int eukrea_cpuimx27_pins[] __initconst = {
/* UART1 */
diff --git a/arch/arm/mach-imx/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c
index d49b0ec..5a31bf8 100644
--- a/arch/arm/mach-imx/mach-cpuimx35.c
+++ b/arch/arm/mach-imx/mach-cpuimx35.c
@@ -37,12 +37,11 @@
#include <asm/mach/time.h>
#include <asm/mach/map.h>
-#include <mach/eukrea-baseboards.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/iomux-mx35.h>
-
+#include "common.h"
#include "devices-imx35.h"
+#include "eukrea-baseboards.h"
+#include "hardware.h"
+#include "iomux-mx35.h"
static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
diff --git a/arch/arm/mach-imx/mach-cpuimx51sd.c b/arch/arm/mach-imx/mach-cpuimx51sd.c
index b87cc49..b727de0 100644
--- a/arch/arm/mach-imx/mach-cpuimx51sd.c
+++ b/arch/arm/mach-imx/mach-cpuimx51sd.c
@@ -26,18 +26,17 @@
#include <linux/spi/spi.h>
#include <linux/can/platform/mcp251x.h>
-#include <mach/eukrea-baseboards.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx51.h>
-
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
+#include "common.h"
#include "devices-imx51.h"
#include "cpu_op-mx51.h"
+#include "eukrea-baseboards.h"
+#include "hardware.h"
+#include "iomux-mx51.h"
#define USBH1_RST IMX_GPIO_NR(2, 28)
#define ETH_RST IMX_GPIO_NR(2, 31)
diff --git a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
index 017bbb7..75027a5 100644
--- a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
+++ b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
@@ -27,18 +27,18 @@
#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>
-#include <mach/eukrea-baseboards.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/memory.h>
#include <asm/mach/map.h>
-#include <mach/common.h>
-#include <mach/mx25.h>
-#include <mach/iomux-mx25.h>
+#include "common.h"
#include "devices-imx25.h"
+#include "eukrea-baseboards.h"
+#include "hardware.h"
+#include "iomux-mx25.h"
+#include "mx25.h"
static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
index 141756f..b744226 100644
--- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
+++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
@@ -40,11 +40,11 @@
#include <asm/mach/time.h>
#include <asm/system_info.h>
#include <asm/memblock.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx27.h>
+#include "common.h"
#include "devices-imx27.h"
+#include "hardware.h"
+#include "iomux-mx27.h"
#define TVP5150_RSTN (GPIO_PORTC + 18)
#define TVP5150_PWDN (GPIO_PORTC + 19)
diff --git a/arch/arm/mach-imx/mach-imx27ipcam.c b/arch/arm/mach-imx/mach-imx27ipcam.c
index 7381387..53a8601 100644
--- a/arch/arm/mach-imx/mach-imx27ipcam.c
+++ b/arch/arm/mach-imx/mach-imx27ipcam.c
@@ -17,11 +17,11 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/iomux-mx27.h>
+#include "hardware.h"
+#include "common.h"
#include "devices-imx27.h"
+#include "iomux-mx27.h"
static const int mx27ipcam_pins[] __initconst = {
/* UART1 */
diff --git a/arch/arm/mach-imx/mach-imx27lite.c b/arch/arm/mach-imx/mach-imx27lite.c
index 1f45b91..fc8dce9 100644
--- a/arch/arm/mach-imx/mach-imx27lite.c
+++ b/arch/arm/mach-imx/mach-imx27lite.c
@@ -20,11 +20,11 @@
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/mach/map.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/iomux-mx27.h>
+#include "common.h"
#include "devices-imx27.h"
+#include "hardware.h"
+#include "iomux-mx27.h"
static const int mx27lite_pins[] __initconst = {
/* UART1 */
diff --git a/arch/arm/mach-imx/mach-imx53.c b/arch/arm/mach-imx/mach-imx53.c
index 29711e9..e71e6261 100644
--- a/arch/arm/mach-imx/mach-imx53.c
+++ b/arch/arm/mach-imx/mach-imx53.c
@@ -19,8 +19,9 @@
#include <linux/of_platform.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
-#include <mach/common.h>
-#include <mach/mx53.h>
+
+#include "common.h"
+#include "mx53.h"
/*
* Lookup table for attaching a specific name and platform_data pointer to
@@ -42,9 +43,9 @@
OF_DEV_AUXDATA("fsl,imx53-ecspi", MX53_ECSPI1_BASE_ADDR, "imx51-ecspi.0", NULL),
OF_DEV_AUXDATA("fsl,imx53-ecspi", MX53_ECSPI2_BASE_ADDR, "imx51-ecspi.1", NULL),
OF_DEV_AUXDATA("fsl,imx53-cspi", MX53_CSPI_BASE_ADDR, "imx35-cspi.0", NULL),
- OF_DEV_AUXDATA("fsl,imx53-i2c", MX53_I2C1_BASE_ADDR, "imx-i2c.0", NULL),
- OF_DEV_AUXDATA("fsl,imx53-i2c", MX53_I2C2_BASE_ADDR, "imx-i2c.1", NULL),
- OF_DEV_AUXDATA("fsl,imx53-i2c", MX53_I2C3_BASE_ADDR, "imx-i2c.2", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-i2c", MX53_I2C1_BASE_ADDR, "imx21-i2c.0", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-i2c", MX53_I2C2_BASE_ADDR, "imx21-i2c.1", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-i2c", MX53_I2C3_BASE_ADDR, "imx21-i2c.2", NULL),
OF_DEV_AUXDATA("fsl,imx53-sdma", MX53_SDMA_BASE_ADDR, "imx35-sdma", NULL),
OF_DEV_AUXDATA("fsl,imx53-wdt", MX53_WDOG1_BASE_ADDR, "imx2-wdt.0", NULL),
{ /* sentinel */ }
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index 47c91f7..978b6dd 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -33,10 +33,10 @@
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/system_misc.h>
-#include <mach/common.h>
-#include <mach/cpuidle.h>
-#include <mach/hardware.h>
+#include "common.h"
+#include "cpuidle.h"
+#include "hardware.h"
void imx6q_restart(char mode, const char *cmd)
{
diff --git a/arch/arm/mach-imx/mach-kzm_arm11_01.c b/arch/arm/mach-imx/mach-kzm_arm11_01.c
index 0330078..2e536ea5 100644
--- a/arch/arm/mach-imx/mach-kzm_arm11_01.c
+++ b/arch/arm/mach-imx/mach-kzm_arm11_01.c
@@ -36,11 +36,10 @@
#include <asm/mach/map.h>
#include <asm/mach/time.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx3.h>
-
+#include "common.h"
#include "devices-imx31.h"
+#include "hardware.h"
+#include "iomux-mx3.h"
#define KZM_ARM11_IO_ADDRESS(x) (IOMEM( \
IMX_IO_P2V_MODULE(x, MX31_CS4) ?: \
diff --git a/arch/arm/mach-imx/mach-mx1ads.c b/arch/arm/mach-imx/mach-mx1ads.c
index 667f359..06b4837 100644
--- a/arch/arm/mach-imx/mach-mx1ads.c
+++ b/arch/arm/mach-imx/mach-mx1ads.c
@@ -23,11 +23,10 @@
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx1.h>
-
+#include "common.h"
#include "devices-imx1.h"
+#include "hardware.h"
+#include "iomux-mx1.h"
static const int mx1ads_pins[] __initconst = {
/* UART1 */
diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c
index ed22e3f..6adb313 100644
--- a/arch/arm/mach-imx/mach-mx21ads.c
+++ b/arch/arm/mach-imx/mach-mx21ads.c
@@ -18,15 +18,15 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/physmap.h>
#include <linux/gpio.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/mach/map.h>
-#include <mach/iomux-mx21.h>
+#include "common.h"
#include "devices-imx21.h"
+#include "hardware.h"
+#include "iomux-mx21.h"
/*
* Memory-mapped I/O on MX21ADS base board
diff --git a/arch/arm/mach-imx/mach-mx25_3ds.c b/arch/arm/mach-imx/mach-mx25_3ds.c
index ce247fd..b1b03aa 100644
--- a/arch/arm/mach-imx/mach-mx25_3ds.c
+++ b/arch/arm/mach-imx/mach-mx25_3ds.c
@@ -31,17 +31,17 @@
#include <linux/platform_device.h>
#include <linux/usb/otg.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/memory.h>
#include <asm/mach/map.h>
-#include <mach/common.h>
-#include <mach/mx25.h>
-#include <mach/iomux-mx25.h>
+#include "common.h"
#include "devices-imx25.h"
+#include "hardware.h"
+#include "iomux-mx25.h"
+#include "mx25.h"
#define MX25PDK_CAN_PWDN IMX_GPIO_NR(4, 6)
diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c
index 05996f3..d0e547f 100644
--- a/arch/arm/mach-imx/mach-mx27_3ds.c
+++ b/arch/arm/mach-imx/mach-mx27_3ds.c
@@ -36,13 +36,13 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/iomux-mx27.h>
-#include <mach/ulpi.h>
-#include <mach/3ds_debugboard.h>
+#include "3ds_debugboard.h"
+#include "common.h"
#include "devices-imx27.h"
+#include "hardware.h"
+#include "iomux-mx27.h"
+#include "ulpi.h"
#define SD1_EN_GPIO IMX_GPIO_NR(2, 25)
#define OTG_PHY_RESET_GPIO IMX_GPIO_NR(2, 23)
diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c
index 7dc59ba..3d036f5 100644
--- a/arch/arm/mach-imx/mach-mx27ads.c
+++ b/arch/arm/mach-imx/mach-mx27ads.c
@@ -21,15 +21,15 @@
#include <linux/mtd/physmap.h>
#include <linux/i2c.h>
#include <linux/irq.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/mach/map.h>
-#include <mach/iomux-mx27.h>
+#include "common.h"
#include "devices-imx27.h"
+#include "hardware.h"
+#include "iomux-mx27.h"
/*
* Base address of PBC controller, CS4
diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c
index 8915f93..bc301be 100644
--- a/arch/arm/mach-imx/mach-mx31_3ds.c
+++ b/arch/arm/mach-imx/mach-mx31_3ds.c
@@ -30,19 +30,19 @@
#include <media/soc_camera.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/memory.h>
#include <asm/mach/map.h>
#include <asm/memblock.h>
-#include <mach/common.h>
-#include <mach/iomux-mx3.h>
-#include <mach/3ds_debugboard.h>
-#include <mach/ulpi.h>
+#include "3ds_debugboard.h"
+#include "common.h"
#include "devices-imx31.h"
+#include "hardware.h"
+#include "iomux-mx3.h"
+#include "ulpi.h"
static int mx31_3ds_pins[] = {
/* UART1 */
@@ -393,7 +393,7 @@
};
static struct regulator_consumer_supply vmmc2_consumers[] = {
- REGULATOR_SUPPLY("vmmc", "mxc-mmc.0"),
+ REGULATOR_SUPPLY("vmmc", "imx31-mmc.0"),
};
static struct regulator_init_data vmmc2_init = {
diff --git a/arch/arm/mach-imx/mach-mx31ads.c b/arch/arm/mach-imx/mach-mx31ads.c
index e774b07..8b56f88 100644
--- a/arch/arm/mach-imx/mach-mx31ads.c
+++ b/arch/arm/mach-imx/mach-mx31ads.c
@@ -28,8 +28,6 @@
#include <asm/mach/time.h>
#include <asm/memory.h>
#include <asm/mach/map.h>
-#include <mach/common.h>
-#include <mach/iomux-mx3.h>
#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
#include <linux/mfd/wm8350/audio.h>
@@ -37,7 +35,10 @@
#include <linux/mfd/wm8350/pmic.h>
#endif
+#include "common.h"
#include "devices-imx31.h"
+#include "hardware.h"
+#include "iomux-mx3.h"
/* Base address of PBC controller */
#define PBC_BASE_ADDRESS MX31_CS4_BASE_ADDR_VIRT
diff --git a/arch/arm/mach-imx/mach-mx31lilly.c b/arch/arm/mach-imx/mach-mx31lilly.c
index 34b9bf0..08b9965 100644
--- a/arch/arm/mach-imx/mach-mx31lilly.c
+++ b/arch/arm/mach-imx/mach-mx31lilly.c
@@ -42,13 +42,12 @@
#include <asm/mach/time.h>
#include <asm/mach/map.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/iomux-mx3.h>
-#include <mach/board-mx31lilly.h>
-#include <mach/ulpi.h>
-
+#include "board-mx31lilly.h"
+#include "common.h"
#include "devices-imx31.h"
+#include "hardware.h"
+#include "iomux-mx3.h"
+#include "ulpi.h"
/*
* This file contains module-specific initialization routines for LILLY-1131.
diff --git a/arch/arm/mach-imx/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c
index ef57cff..bdcd92e 100644
--- a/arch/arm/mach-imx/mach-mx31lite.c
+++ b/arch/arm/mach-imx/mach-mx31lite.c
@@ -39,13 +39,12 @@
#include <asm/page.h>
#include <asm/setup.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/board-mx31lite.h>
-#include <mach/iomux-mx3.h>
-#include <mach/ulpi.h>
-
+#include "board-mx31lite.h"
+#include "common.h"
#include "devices-imx31.h"
+#include "hardware.h"
+#include "iomux-mx3.h"
+#include "ulpi.h"
/*
* This file contains the module-specific initialization routines.
diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c
index 459e754..2517cfa 100644
--- a/arch/arm/mach-imx/mach-mx31moboard.c
+++ b/arch/arm/mach-imx/mach-mx31moboard.c
@@ -42,14 +42,14 @@
#include <asm/mach/time.h>
#include <asm/mach/map.h>
#include <asm/memblock.h>
-#include <mach/board-mx31moboard.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx3.h>
-#include <mach/ulpi.h>
#include <linux/platform_data/asoc-imx-ssi.h>
+#include "board-mx31moboard.h"
+#include "common.h"
#include "devices-imx31.h"
+#include "hardware.h"
+#include "iomux-mx3.h"
+#include "ulpi.h"
static unsigned int moboard_pins[] = {
/* UART0 */
@@ -175,11 +175,11 @@
static struct regulator_consumer_supply sdhc_consumers[] = {
{
- .dev_name = "mxc-mmc.0",
+ .dev_name = "imx31-mmc.0",
.supply = "sdhc0_vcc",
},
{
- .dev_name = "mxc-mmc.1",
+ .dev_name = "imx31-mmc.1",
.supply = "sdhc1_vcc",
},
};
diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c
index 504983c..5277da4 100644
--- a/arch/arm/mach-imx/mach-mx35_3ds.c
+++ b/arch/arm/mach-imx/mach-mx35_3ds.c
@@ -43,15 +43,15 @@
#include <asm/mach/map.h>
#include <asm/memblock.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/iomux-mx35.h>
-#include <mach/3ds_debugboard.h>
#include <video/platform_lcd.h>
#include <media/soc_camera.h>
+#include "3ds_debugboard.h"
+#include "common.h"
#include "devices-imx35.h"
+#include "hardware.h"
+#include "iomux-mx35.h"
#define GPIO_MC9S08DZ60_GPS_ENABLE 0
#define GPIO_MC9S08DZ60_HDD_ENABLE 4
diff --git a/arch/arm/mach-imx/mach-mx50_rdp.c b/arch/arm/mach-imx/mach-mx50_rdp.c
index 42b66e8..0c1f88a 100644
--- a/arch/arm/mach-imx/mach-mx50_rdp.c
+++ b/arch/arm/mach-imx/mach-mx50_rdp.c
@@ -24,17 +24,16 @@
#include <linux/delay.h>
#include <linux/io.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx50.h>
-
#include <asm/irq.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
+#include "common.h"
#include "devices-imx50.h"
+#include "hardware.h"
+#include "iomux-mx50.h"
#define FEC_EN IMX_GPIO_NR(6, 23)
#define FEC_RESET_B IMX_GPIO_NR(4, 12)
diff --git a/arch/arm/mach-imx/mach-mx51_3ds.c b/arch/arm/mach-imx/mach-mx51_3ds.c
index 9ee84a4..abc25bd 100644
--- a/arch/arm/mach-imx/mach-mx51_3ds.c
+++ b/arch/arm/mach-imx/mach-mx51_3ds.c
@@ -19,12 +19,11 @@
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/iomux-mx51.h>
-#include <mach/3ds_debugboard.h>
-
+#include "3ds_debugboard.h"
+#include "common.h"
#include "devices-imx51.h"
+#include "hardware.h"
+#include "iomux-mx51.h"
#define MX51_3DS_ECSPI2_CS (GPIO_PORTC + 28)
diff --git a/arch/arm/mach-imx/mach-mx51_babbage.c b/arch/arm/mach-imx/mach-mx51_babbage.c
index 7b31cbd..d9a84ca 100644
--- a/arch/arm/mach-imx/mach-mx51_babbage.c
+++ b/arch/arm/mach-imx/mach-mx51_babbage.c
@@ -20,17 +20,16 @@
#include <linux/spi/flash.h>
#include <linux/spi/spi.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx51.h>
-
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
+#include "common.h"
#include "devices-imx51.h"
#include "cpu_op-mx51.h"
+#include "hardware.h"
+#include "iomux-mx51.h"
#define BABBAGE_USB_HUB_RESET IMX_GPIO_NR(1, 7)
#define BABBAGE_USBH1_STP IMX_GPIO_NR(1, 27)
diff --git a/arch/arm/mach-imx/mach-mxt_td60.c b/arch/arm/mach-imx/mach-mxt_td60.c
index 0bf6d30..f4a8c7e 100644
--- a/arch/arm/mach-imx/mach-mxt_td60.c
+++ b/arch/arm/mach-imx/mach-mxt_td60.c
@@ -21,17 +21,17 @@
#include <linux/mtd/physmap.h>
#include <linux/i2c.h>
#include <linux/irq.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/mach/map.h>
#include <linux/gpio.h>
-#include <mach/iomux-mx27.h>
#include <linux/i2c/pca953x.h>
+#include "common.h"
#include "devices-imx27.h"
+#include "hardware.h"
+#include "iomux-mx27.h"
static const int mxt_td60_pins[] __initconst = {
/* UART0 */
diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c
index de8516b..eee369f 100644
--- a/arch/arm/mach-imx/mach-pca100.c
+++ b/arch/arm/mach-imx/mach-pca100.c
@@ -32,13 +32,13 @@
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx27.h>
#include <asm/mach/time.h>
-#include <mach/ulpi.h>
+#include "common.h"
#include "devices-imx27.h"
+#include "hardware.h"
+#include "iomux-mx27.h"
+#include "ulpi.h"
#define OTG_PHY_CS_GPIO (GPIO_PORTB + 23)
#define USBH2_PHY_CS_GPIO (GPIO_PORTB + 24)
diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c
index e3c4513..547fef1 100644
--- a/arch/arm/mach-imx/mach-pcm037.c
+++ b/arch/arm/mach-imx/mach-pcm037.c
@@ -42,13 +42,13 @@
#include <asm/mach/time.h>
#include <asm/mach/map.h>
#include <asm/memblock.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx3.h>
-#include <mach/ulpi.h>
+#include "common.h"
#include "devices-imx31.h"
+#include "hardware.h"
+#include "iomux-mx3.h"
#include "pcm037.h"
+#include "ulpi.h"
static enum pcm037_board_variant pcm037_instance = PCM037_PCM970;
diff --git a/arch/arm/mach-imx/mach-pcm037_eet.c b/arch/arm/mach-imx/mach-pcm037_eet.c
index 11ffa81..8fd8255 100644
--- a/arch/arm/mach-imx/mach-pcm037_eet.c
+++ b/arch/arm/mach-imx/mach-pcm037_eet.c
@@ -11,13 +11,12 @@
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
-#include <mach/common.h>
-#include <mach/iomux-mx3.h>
-
#include <asm/mach-types.h>
#include "pcm037.h"
+#include "common.h"
#include "devices-imx31.h"
+#include "iomux-mx3.h"
static unsigned int pcm037_eet_pins[] = {
/* Reserve and hardwire GPIO 57 high - S6E63D6 chipselect */
diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c
index 95f49d9..4aa0d07 100644
--- a/arch/arm/mach-imx/mach-pcm038.c
+++ b/arch/arm/mach-imx/mach-pcm038.c
@@ -33,13 +33,12 @@
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
-#include <mach/board-pcm038.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx27.h>
-#include <mach/ulpi.h>
-
+#include "board-pcm038.h"
+#include "common.h"
#include "devices-imx27.h"
+#include "hardware.h"
+#include "iomux-mx27.h"
+#include "ulpi.h"
static const int pcm038_pins[] __initconst = {
/* UART1 */
@@ -212,7 +211,7 @@
static struct regulator_consumer_supply sdhc1_consumers[] = {
{
- .dev_name = "mxc-mmc.1",
+ .dev_name = "imx21-mmc.1",
.supply = "sdhc_vcc",
},
};
diff --git a/arch/arm/mach-imx/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c
index e4bd438..9244544 100644
--- a/arch/arm/mach-imx/mach-pcm043.c
+++ b/arch/arm/mach-imx/mach-pcm043.c
@@ -33,12 +33,11 @@
#include <asm/mach/time.h>
#include <asm/mach/map.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/iomux-mx35.h>
-#include <mach/ulpi.h>
-
+#include "common.h"
#include "devices-imx35.h"
+#include "hardware.h"
+#include "iomux-mx35.h"
+#include "ulpi.h"
static const struct fb_videomode fb_modedb[] = {
{
diff --git a/arch/arm/mach-imx/mach-qong.c b/arch/arm/mach-imx/mach-qong.c
index fb25fbd..96d9a91 100644
--- a/arch/arm/mach-imx/mach-qong.c
+++ b/arch/arm/mach-imx/mach-qong.c
@@ -21,17 +21,17 @@
#include <linux/mtd/nand.h>
#include <linux/gpio.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/mach/map.h>
-#include <mach/common.h>
#include <asm/page.h>
#include <asm/setup.h>
-#include <mach/iomux-mx3.h>
+#include "common.h"
#include "devices-imx31.h"
+#include "hardware.h"
+#include "iomux-mx3.h"
/* FPGA defines */
#define QONG_FPGA_VERSION(major, minor, rev) \
diff --git a/arch/arm/mach-imx/mach-scb9328.c b/arch/arm/mach-imx/mach-scb9328.c
index 67ff38e..fc97040 100644
--- a/arch/arm/mach-imx/mach-scb9328.c
+++ b/arch/arm/mach-imx/mach-scb9328.c
@@ -20,11 +20,10 @@
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx1.h>
-
+#include "common.h"
#include "devices-imx1.h"
+#include "hardware.h"
+#include "iomux-mx1.h"
/*
* This scb9328 has a 32MiB flash
diff --git a/arch/arm/mach-imx/mach-vpr200.c b/arch/arm/mach-imx/mach-vpr200.c
index 39eb796..3aecf91 100644
--- a/arch/arm/mach-imx/mach-vpr200.c
+++ b/arch/arm/mach-imx/mach-vpr200.c
@@ -28,15 +28,14 @@
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/iomux-mx35.h>
-
#include <linux/i2c.h>
#include <linux/i2c/at24.h>
#include <linux/mfd/mc13xxx.h>
+#include "common.h"
#include "devices-imx35.h"
+#include "hardware.h"
+#include "iomux-mx35.h"
#define GPIO_LCDPWR IMX_GPIO_NR(1, 2)
#define GPIO_PMIC_INT IMX_GPIO_NR(2, 0)
diff --git a/arch/arm/mach-imx/mm-imx1.c b/arch/arm/mach-imx/mm-imx1.c
index 6d60d51..7a14667 100644
--- a/arch/arm/mach-imx/mm-imx1.c
+++ b/arch/arm/mach-imx/mm-imx1.c
@@ -22,9 +22,10 @@
#include <asm/mach/map.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-v1.h>
+#include "common.h"
+#include "devices/devices-common.h"
+#include "hardware.h"
+#include "iomux-v1.h"
static struct map_desc imx_io_desc[] __initdata = {
imx_map_entry(MX1, IO, MT_DEVICE),
@@ -58,5 +59,7 @@
MX1_GPIO_INT_PORTC, 0);
mxc_register_gpio("imx1-gpio", 3, MX1_GPIO4_BASE_ADDR, SZ_256,
MX1_GPIO_INT_PORTD, 0);
+ imx_add_imx_dma("imx1-dma", MX1_DMA_BASE_ADDR,
+ MX1_DMA_INT, MX1_DMA_ERR);
pinctrl_provide_dummies();
}
diff --git a/arch/arm/mach-imx/mm-imx21.c b/arch/arm/mach-imx/mm-imx21.c
index d056dad..d8ccd3a 100644
--- a/arch/arm/mach-imx/mm-imx21.c
+++ b/arch/arm/mach-imx/mm-imx21.c
@@ -21,12 +21,13 @@
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/pinctrl/machine.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/devices-common.h>
#include <asm/pgtable.h>
#include <asm/mach/map.h>
-#include <mach/iomux-v1.h>
+
+#include "common.h"
+#include "devices/devices-common.h"
+#include "hardware.h"
+#include "iomux-v1.h"
/* MX21 memory map definition */
static struct map_desc imx21_io_desc[] __initdata = {
@@ -81,6 +82,8 @@
void __init imx21_soc_init(void)
{
+ mxc_device_init();
+
mxc_register_gpio("imx21-gpio", 0, MX21_GPIO1_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);
mxc_register_gpio("imx21-gpio", 1, MX21_GPIO2_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);
mxc_register_gpio("imx21-gpio", 2, MX21_GPIO3_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);
@@ -89,7 +92,8 @@
mxc_register_gpio("imx21-gpio", 5, MX21_GPIO6_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);
pinctrl_provide_dummies();
- imx_add_imx_dma();
+ imx_add_imx_dma("imx21-dma", MX21_DMA_BASE_ADDR,
+ MX21_INT_DMACH0, 0); /* No ERR irq */
platform_device_register_simple("imx21-audmux", 0, imx21_audmux_res,
ARRAY_SIZE(imx21_audmux_res));
}
diff --git a/arch/arm/mach-imx/mm-imx25.c b/arch/arm/mach-imx/mm-imx25.c
index f3f5c65..9357707 100644
--- a/arch/arm/mach-imx/mm-imx25.c
+++ b/arch/arm/mach-imx/mm-imx25.c
@@ -24,11 +24,11 @@
#include <asm/pgtable.h>
#include <asm/mach/map.h>
-#include <mach/common.h>
-#include <mach/devices-common.h>
-#include <mach/hardware.h>
-#include <mach/mx25.h>
-#include <mach/iomux-v3.h>
+#include "common.h"
+#include "devices/devices-common.h"
+#include "hardware.h"
+#include "iomux-v3.h"
+#include "mx25.h"
/*
* This table defines static virtual address mappings for I/O regions.
@@ -89,6 +89,8 @@
void __init imx25_soc_init(void)
{
+ mxc_device_init();
+
/* i.mx25 has the i.mx35 type gpio */
mxc_register_gpio("imx35-gpio", 0, MX25_GPIO1_BASE_ADDR, SZ_16K, MX25_INT_GPIO1, 0);
mxc_register_gpio("imx35-gpio", 1, MX25_GPIO2_BASE_ADDR, SZ_16K, MX25_INT_GPIO2, 0);
diff --git a/arch/arm/mach-imx/mm-imx27.c b/arch/arm/mach-imx/mm-imx27.c
index e7e24af..4f1be65 100644
--- a/arch/arm/mach-imx/mm-imx27.c
+++ b/arch/arm/mach-imx/mm-imx27.c
@@ -21,12 +21,13 @@
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/pinctrl/machine.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/devices-common.h>
#include <asm/pgtable.h>
#include <asm/mach/map.h>
-#include <mach/iomux-v1.h>
+
+#include "common.h"
+#include "devices/devices-common.h"
+#include "hardware.h"
+#include "iomux-v1.h"
/* MX27 memory map definition */
static struct map_desc imx27_io_desc[] __initdata = {
@@ -81,6 +82,8 @@
void __init imx27_soc_init(void)
{
+ mxc_device_init();
+
/* i.mx27 has the i.mx21 type gpio */
mxc_register_gpio("imx21-gpio", 0, MX27_GPIO1_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
mxc_register_gpio("imx21-gpio", 1, MX27_GPIO2_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
@@ -90,7 +93,8 @@
mxc_register_gpio("imx21-gpio", 5, MX27_GPIO6_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
pinctrl_provide_dummies();
- imx_add_imx_dma();
+ imx_add_imx_dma("imx27-dma", MX27_DMA_BASE_ADDR,
+ MX27_INT_DMACH0, 0); /* No ERR irq */
/* imx27 has the imx21 type audmux */
platform_device_register_simple("imx21-audmux", 0, imx27_audmux_res,
ARRAY_SIZE(imx27_audmux_res));
diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c
index 9d2c843..cefa047 100644
--- a/arch/arm/mach-imx/mm-imx3.c
+++ b/arch/arm/mach-imx/mm-imx3.c
@@ -26,12 +26,11 @@
#include <asm/hardware/cache-l2x0.h>
#include <asm/mach/map.h>
-#include <mach/common.h>
-#include <mach/devices-common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-v3.h>
-
+#include "common.h"
#include "crmregs-imx3.h"
+#include "devices/devices-common.h"
+#include "hardware.h"
+#include "iomux-v3.h"
void __iomem *mx3_ccm_base;
@@ -108,9 +107,8 @@
}
l2x0_base = ioremap(MX3x_L2CC_BASE_ADDR, 4096);
- if (IS_ERR(l2x0_base)) {
- printk(KERN_ERR "remapping L2 cache area failed with %ld\n",
- PTR_ERR(l2x0_base));
+ if (!l2x0_base) {
+ printk(KERN_ERR "remapping L2 cache area failed\n");
return;
}
@@ -176,6 +174,8 @@
imx3_init_l2x0();
+ mxc_device_init();
+
mxc_register_gpio("imx31-gpio", 0, MX31_GPIO1_BASE_ADDR, SZ_16K, MX31_INT_GPIO1, 0);
mxc_register_gpio("imx31-gpio", 1, MX31_GPIO2_BASE_ADDR, SZ_16K, MX31_INT_GPIO2, 0);
mxc_register_gpio("imx31-gpio", 2, MX31_GPIO3_BASE_ADDR, SZ_16K, MX31_INT_GPIO3, 0);
@@ -272,6 +272,8 @@
imx3_init_l2x0();
+ mxc_device_init();
+
mxc_register_gpio("imx35-gpio", 0, MX35_GPIO1_BASE_ADDR, SZ_16K, MX35_INT_GPIO1, 0);
mxc_register_gpio("imx35-gpio", 1, MX35_GPIO2_BASE_ADDR, SZ_16K, MX35_INT_GPIO2, 0);
mxc_register_gpio("imx35-gpio", 2, MX35_GPIO3_BASE_ADDR, SZ_16K, MX35_INT_GPIO3, 0);
diff --git a/arch/arm/mach-imx/mm-imx5.c b/arch/arm/mach-imx/mm-imx5.c
index acb0aad..f92caf1b 100644
--- a/arch/arm/mach-imx/mm-imx5.c
+++ b/arch/arm/mach-imx/mm-imx5.c
@@ -18,10 +18,10 @@
#include <asm/mach/map.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/devices-common.h>
-#include <mach/iomux-v3.h>
+#include "common.h"
+#include "devices/devices-common.h"
+#include "hardware.h"
+#include "iomux-v3.h"
/*
* Define the MX50 memory map.
@@ -138,6 +138,8 @@
void __init imx50_soc_init(void)
{
+ mxc_device_init();
+
/* i.mx50 has the i.mx35 type gpio */
mxc_register_gpio("imx35-gpio", 0, MX50_GPIO1_BASE_ADDR, SZ_16K, MX50_INT_GPIO1_LOW, MX50_INT_GPIO1_HIGH);
mxc_register_gpio("imx35-gpio", 1, MX50_GPIO2_BASE_ADDR, SZ_16K, MX50_INT_GPIO2_LOW, MX50_INT_GPIO2_HIGH);
@@ -153,6 +155,8 @@
void __init imx51_soc_init(void)
{
+ mxc_device_init();
+
/* i.mx51 has the i.mx35 type gpio */
mxc_register_gpio("imx35-gpio", 0, MX51_GPIO1_BASE_ADDR, SZ_16K, MX51_INT_GPIO1_LOW, MX51_INT_GPIO1_HIGH);
mxc_register_gpio("imx35-gpio", 1, MX51_GPIO2_BASE_ADDR, SZ_16K, MX51_INT_GPIO2_LOW, MX51_INT_GPIO2_HIGH);
diff --git a/arch/arm/plat-mxc/include/mach/mx1.h b/arch/arm/mach-imx/mx1.h
similarity index 100%
rename from arch/arm/plat-mxc/include/mach/mx1.h
rename to arch/arm/mach-imx/mx1.h
diff --git a/arch/arm/plat-mxc/include/mach/mx21.h b/arch/arm/mach-imx/mx21.h
similarity index 100%
rename from arch/arm/plat-mxc/include/mach/mx21.h
rename to arch/arm/mach-imx/mx21.h
diff --git a/arch/arm/plat-mxc/include/mach/mx25.h b/arch/arm/mach-imx/mx25.h
similarity index 100%
rename from arch/arm/plat-mxc/include/mach/mx25.h
rename to arch/arm/mach-imx/mx25.h
diff --git a/arch/arm/plat-mxc/include/mach/mx27.h b/arch/arm/mach-imx/mx27.h
similarity index 100%
rename from arch/arm/plat-mxc/include/mach/mx27.h
rename to arch/arm/mach-imx/mx27.h
diff --git a/arch/arm/plat-mxc/include/mach/mx2x.h b/arch/arm/mach-imx/mx2x.h
similarity index 100%
rename from arch/arm/plat-mxc/include/mach/mx2x.h
rename to arch/arm/mach-imx/mx2x.h
diff --git a/arch/arm/plat-mxc/include/mach/mx31.h b/arch/arm/mach-imx/mx31.h
similarity index 100%
rename from arch/arm/plat-mxc/include/mach/mx31.h
rename to arch/arm/mach-imx/mx31.h
diff --git a/arch/arm/mach-imx/mx31lilly-db.c b/arch/arm/mach-imx/mx31lilly-db.c
index 29e890f..d4361b8 100644
--- a/arch/arm/mach-imx/mx31lilly-db.c
+++ b/arch/arm/mach-imx/mx31lilly-db.c
@@ -30,12 +30,11 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/iomux-mx3.h>
-#include <mach/board-mx31lilly.h>
-
+#include "board-mx31lilly.h"
+#include "common.h"
#include "devices-imx31.h"
+#include "hardware.h"
+#include "iomux-mx3.h"
/*
* This file contains board-specific initialization routines for the
diff --git a/arch/arm/mach-imx/mx31lite-db.c b/arch/arm/mach-imx/mx31lite-db.c
index 83d17d9..5a160b7 100644
--- a/arch/arm/mach-imx/mx31lite-db.c
+++ b/arch/arm/mach-imx/mx31lite-db.c
@@ -31,12 +31,11 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/iomux-mx3.h>
-#include <mach/board-mx31lite.h>
-
+#include "board-mx31lite.h"
+#include "common.h"
#include "devices-imx31.h"
+#include "hardware.h"
+#include "iomux-mx3.h"
/*
* This file contains board-specific initialization routines for the
diff --git a/arch/arm/mach-imx/mx31moboard-devboard.c b/arch/arm/mach-imx/mx31moboard-devboard.c
index cc285e5..52d5b15 100644
--- a/arch/arm/mach-imx/mx31moboard-devboard.c
+++ b/arch/arm/mach-imx/mx31moboard-devboard.c
@@ -22,12 +22,11 @@
#include <linux/usb/otg.h>
-#include <mach/common.h>
-#include <mach/iomux-mx3.h>
-#include <mach/hardware.h>
-#include <mach/ulpi.h>
-
+#include "common.h"
#include "devices-imx31.h"
+#include "hardware.h"
+#include "iomux-mx3.h"
+#include "ulpi.h"
static unsigned int devboard_pins[] = {
/* UART1 */
diff --git a/arch/arm/mach-imx/mx31moboard-marxbot.c b/arch/arm/mach-imx/mx31moboard-marxbot.c
index 135c90e..a4f43e9 100644
--- a/arch/arm/mach-imx/mx31moboard-marxbot.c
+++ b/arch/arm/mach-imx/mx31moboard-marxbot.c
@@ -24,14 +24,13 @@
#include <linux/usb/otg.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx3.h>
-#include <mach/ulpi.h>
-
#include <media/soc_camera.h>
+#include "common.h"
#include "devices-imx31.h"
+#include "hardware.h"
+#include "iomux-mx3.h"
+#include "ulpi.h"
static unsigned int marxbot_pins[] = {
/* SDHC2 */
diff --git a/arch/arm/mach-imx/mx31moboard-smartbot.c b/arch/arm/mach-imx/mx31moboard-smartbot.c
index fabb801..04ae45d 100644
--- a/arch/arm/mach-imx/mx31moboard-smartbot.c
+++ b/arch/arm/mach-imx/mx31moboard-smartbot.c
@@ -23,15 +23,14 @@
#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx3.h>
-#include <mach/board-mx31moboard.h>
-#include <mach/ulpi.h>
-
#include <media/soc_camera.h>
+#include "board-mx31moboard.h"
+#include "common.h"
#include "devices-imx31.h"
+#include "hardware.h"
+#include "iomux-mx3.h"
+#include "ulpi.h"
static unsigned int smartbot_pins[] = {
/* UART1 */
diff --git a/arch/arm/plat-mxc/include/mach/mx35.h b/arch/arm/mach-imx/mx35.h
similarity index 100%
rename from arch/arm/plat-mxc/include/mach/mx35.h
rename to arch/arm/mach-imx/mx35.h
diff --git a/arch/arm/plat-mxc/include/mach/mx3x.h b/arch/arm/mach-imx/mx3x.h
similarity index 100%
rename from arch/arm/plat-mxc/include/mach/mx3x.h
rename to arch/arm/mach-imx/mx3x.h
diff --git a/arch/arm/plat-mxc/include/mach/mx50.h b/arch/arm/mach-imx/mx50.h
similarity index 100%
rename from arch/arm/plat-mxc/include/mach/mx50.h
rename to arch/arm/mach-imx/mx50.h
diff --git a/arch/arm/plat-mxc/include/mach/mx51.h b/arch/arm/mach-imx/mx51.h
similarity index 100%
rename from arch/arm/plat-mxc/include/mach/mx51.h
rename to arch/arm/mach-imx/mx51.h
diff --git a/arch/arm/plat-mxc/include/mach/mx53.h b/arch/arm/mach-imx/mx53.h
similarity index 100%
rename from arch/arm/plat-mxc/include/mach/mx53.h
rename to arch/arm/mach-imx/mx53.h
diff --git a/arch/arm/plat-mxc/include/mach/mx6q.h b/arch/arm/mach-imx/mx6q.h
similarity index 100%
rename from arch/arm/plat-mxc/include/mach/mx6q.h
rename to arch/arm/mach-imx/mx6q.h
diff --git a/arch/arm/plat-mxc/include/mach/mxc.h b/arch/arm/mach-imx/mxc.h
similarity index 100%
rename from arch/arm/plat-mxc/include/mach/mxc.h
rename to arch/arm/mach-imx/mxc.h
diff --git a/arch/arm/mach-imx/pcm970-baseboard.c b/arch/arm/mach-imx/pcm970-baseboard.c
index 9917e2f..51c6082 100644
--- a/arch/arm/mach-imx/pcm970-baseboard.c
+++ b/arch/arm/mach-imx/pcm970-baseboard.c
@@ -23,11 +23,10 @@
#include <asm/mach/arch.h>
-#include <mach/common.h>
-#include <mach/iomux-mx27.h>
-#include <mach/hardware.h>
-
+#include "common.h"
#include "devices-imx27.h"
+#include "hardware.h"
+#include "iomux-mx27.h"
static const int pcm970_pins[] __initconst = {
/* SDHC */
diff --git a/arch/arm/mach-imx/platsmp.c b/arch/arm/mach-imx/platsmp.c
index 2ac43e1..3777b80 100644
--- a/arch/arm/mach-imx/platsmp.c
+++ b/arch/arm/mach-imx/platsmp.c
@@ -16,8 +16,9 @@
#include <asm/smp_scu.h>
#include <asm/hardware/gic.h>
#include <asm/mach/map.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
+
+#include "common.h"
+#include "hardware.h"
static void __iomem *scu_base;
diff --git a/arch/arm/mach-imx/pm-imx27.c b/arch/arm/mach-imx/pm-imx27.c
index 6fcffa7..56d02d0 100644
--- a/arch/arm/mach-imx/pm-imx27.c
+++ b/arch/arm/mach-imx/pm-imx27.c
@@ -10,7 +10,8 @@
#include <linux/kernel.h>
#include <linux/suspend.h>
#include <linux/io.h>
-#include <mach/hardware.h>
+
+#include "hardware.h"
static int mx27_suspend_enter(suspend_state_t state)
{
diff --git a/arch/arm/mach-imx/pm-imx3.c b/arch/arm/mach-imx/pm-imx3.c
index 822103b..6a07006 100644
--- a/arch/arm/mach-imx/pm-imx3.c
+++ b/arch/arm/mach-imx/pm-imx3.c
@@ -9,10 +9,11 @@
* http://www.gnu.org/copyleft/gpl.html
*/
#include <linux/io.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
+
+#include "common.h"
#include "crmregs-imx3.h"
+#include "devices/devices-common.h"
+#include "hardware.h"
/*
* Set cpu low power mode before WFI instruction. This function is called
diff --git a/arch/arm/mach-imx/pm-imx5.c b/arch/arm/mach-imx/pm-imx5.c
index 19621ed1..2e063c2 100644
--- a/arch/arm/mach-imx/pm-imx5.c
+++ b/arch/arm/mach-imx/pm-imx5.c
@@ -16,10 +16,11 @@
#include <asm/cacheflush.h>
#include <asm/system_misc.h>
#include <asm/tlbflush.h>
-#include <mach/common.h>
-#include <mach/cpuidle.h>
-#include <mach/hardware.h>
+
+#include "common.h"
+#include "cpuidle.h"
#include "crm-regs-imx5.h"
+#include "hardware.h"
/*
* The WAIT_UNCLOCKED_POWER_OFF state only requires <= 500ns to exit.
diff --git a/arch/arm/mach-imx/pm-imx6q.c b/arch/arm/mach-imx/pm-imx6q.c
index f7b0c2b..a17543d 100644
--- a/arch/arm/mach-imx/pm-imx6q.c
+++ b/arch/arm/mach-imx/pm-imx6q.c
@@ -18,8 +18,9 @@
#include <asm/proc-fns.h>
#include <asm/suspend.h>
#include <asm/hardware/cache-l2x0.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
+
+#include "common.h"
+#include "hardware.h"
extern unsigned long phys_l2x0_saved_regs;
diff --git a/arch/arm/plat-mxc/ssi-fiq-ksym.c b/arch/arm/mach-imx/ssi-fiq-ksym.c
similarity index 100%
rename from arch/arm/plat-mxc/ssi-fiq-ksym.c
rename to arch/arm/mach-imx/ssi-fiq-ksym.c
diff --git a/arch/arm/plat-mxc/ssi-fiq.S b/arch/arm/mach-imx/ssi-fiq.S
similarity index 100%
rename from arch/arm/plat-mxc/ssi-fiq.S
rename to arch/arm/mach-imx/ssi-fiq.S
diff --git a/arch/arm/plat-mxc/system.c b/arch/arm/mach-imx/system.c
similarity index 96%
rename from arch/arm/plat-mxc/system.c
rename to arch/arm/mach-imx/system.c
index 3da78cf..695e0d7 100644
--- a/arch/arm/plat-mxc/system.c
+++ b/arch/arm/mach-imx/system.c
@@ -22,12 +22,13 @@
#include <linux/err.h>
#include <linux/delay.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
#include <asm/system_misc.h>
#include <asm/proc-fns.h>
#include <asm/mach-types.h>
+#include "common.h"
+#include "hardware.h"
+
static void __iomem *wdog_base;
/*
diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/mach-imx/time.c
similarity index 99%
rename from arch/arm/plat-mxc/time.c
rename to arch/arm/mach-imx/time.c
index a17abcf..f017302 100644
--- a/arch/arm/plat-mxc/time.c
+++ b/arch/arm/mach-imx/time.c
@@ -27,10 +27,11 @@
#include <linux/clk.h>
#include <linux/err.h>
-#include <mach/hardware.h>
#include <asm/sched_clock.h>
#include <asm/mach/time.h>
-#include <mach/common.h>
+
+#include "common.h"
+#include "hardware.h"
/*
* There are 2 versions of the timer hardware on Freescale MXC hardware.
diff --git a/arch/arm/plat-mxc/tzic.c b/arch/arm/mach-imx/tzic.c
similarity index 98%
rename from arch/arm/plat-mxc/tzic.c
rename to arch/arm/mach-imx/tzic.c
index 3ed1adb..9721161 100644
--- a/arch/arm/plat-mxc/tzic.c
+++ b/arch/arm/mach-imx/tzic.c
@@ -21,10 +21,8 @@
#include <asm/mach/irq.h>
#include <asm/exception.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/irqs.h>
-
+#include "common.h"
+#include "hardware.h"
#include "irq-common.h"
/*
diff --git a/arch/arm/plat-mxc/ulpi.c b/arch/arm/mach-imx/ulpi.c
similarity index 98%
rename from arch/arm/plat-mxc/ulpi.c
rename to arch/arm/mach-imx/ulpi.c
index d296342..0f05195 100644
--- a/arch/arm/plat-mxc/ulpi.c
+++ b/arch/arm/mach-imx/ulpi.c
@@ -24,7 +24,7 @@
#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>
-#include <mach/ulpi.h>
+#include "ulpi.h"
/* ULPIVIEW register bits */
#define ULPIVW_WU (1 << 31) /* Wakeup */
diff --git a/arch/arm/plat-mxc/include/mach/ulpi.h b/arch/arm/mach-imx/ulpi.h
similarity index 100%
rename from arch/arm/plat-mxc/include/mach/ulpi.h
rename to arch/arm/mach-imx/ulpi.h
diff --git a/arch/arm/mach-kirkwood/board-dockstar.c b/arch/arm/mach-kirkwood/board-dockstar.c
index f2fbb02..6912882 100644
--- a/arch/arm/mach-kirkwood/board-dockstar.c
+++ b/arch/arm/mach-kirkwood/board-dockstar.c
@@ -16,21 +16,8 @@
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
#include <linux/mv643xx_eth.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_fdt.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
#include <linux/gpio.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <mach/kirkwood.h>
-#include <mach/bridge-regs.h>
-#include <linux/platform_data/mmc-mvsdio.h>
#include "common.h"
#include "mpp.h"
diff --git a/arch/arm/mach-kirkwood/board-dreamplug.c b/arch/arm/mach-kirkwood/board-dreamplug.c
index 20af53a..8a8ebe0 100644
--- a/arch/arm/mach-kirkwood/board-dreamplug.c
+++ b/arch/arm/mach-kirkwood/board-dreamplug.c
@@ -13,23 +13,8 @@
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
#include <linux/mv643xx_eth.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_fdt.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
#include <linux/gpio.h>
-#include <linux/mtd/physmap.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <mach/kirkwood.h>
-#include <mach/bridge-regs.h>
#include <linux/platform_data/mmc-mvsdio.h>
#include "common.h"
#include "mpp.h"
diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c
index d94872f..e75fbdb 100644
--- a/arch/arm/mach-kirkwood/board-dt.c
+++ b/arch/arm/mach-kirkwood/board-dt.c
@@ -26,7 +26,7 @@
{ }
};
-struct of_dev_auxdata kirkwood_auxdata_lookup[] __initdata = {
+static struct of_dev_auxdata kirkwood_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("marvell,orion-spi", 0xf1010600, "orion_spi.0", NULL),
OF_DEV_AUXDATA("marvell,mv64xxx-i2c", 0xf1011000, "mv64xxx_i2c.0",
NULL),
@@ -98,7 +98,7 @@
kirkwood_auxdata_lookup, NULL);
}
-static const char *kirkwood_dt_board_compat[] = {
+static const char * const kirkwood_dt_board_compat[] = {
"globalscale,dreamplug",
"dlink,dns-320",
"dlink,dns-325",
diff --git a/arch/arm/mach-kirkwood/board-goflexnet.c b/arch/arm/mach-kirkwood/board-goflexnet.c
index 001ca8c..5dcd0d6 100644
--- a/arch/arm/mach-kirkwood/board-goflexnet.c
+++ b/arch/arm/mach-kirkwood/board-goflexnet.c
@@ -18,21 +18,8 @@
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
#include <linux/mv643xx_eth.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_fdt.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
#include <linux/gpio.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <mach/kirkwood.h>
-#include <mach/bridge-regs.h>
-#include <linux/platform_data/mmc-mvsdio.h>
#include "common.h"
#include "mpp.h"
diff --git a/arch/arm/mach-kirkwood/board-ib62x0.c b/arch/arm/mach-kirkwood/board-ib62x0.c
index cfc47f8..6d3a564 100644
--- a/arch/arm/mach-kirkwood/board-ib62x0.c
+++ b/arch/arm/mach-kirkwood/board-ib62x0.c
@@ -13,15 +13,9 @@
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/partitions.h>
-#include <linux/ata_platform.h>
#include <linux/mv643xx_eth.h>
#include <linux/gpio.h>
#include <linux/input.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
#include "common.h"
#include "mpp.h"
diff --git a/arch/arm/mach-kirkwood/board-iconnect.c b/arch/arm/mach-kirkwood/board-iconnect.c
index d084b1e2..24f5aa7 100644
--- a/arch/arm/mach-kirkwood/board-iconnect.c
+++ b/arch/arm/mach-kirkwood/board-iconnect.c
@@ -10,16 +10,8 @@
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/platform_device.h>
#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_fdt.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
#include <linux/mv643xx_eth.h>
-#include <linux/gpio.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
#include "common.h"
#include "mpp.h"
diff --git a/arch/arm/mach-kirkwood/board-iomega_ix2_200.c b/arch/arm/mach-kirkwood/board-iomega_ix2_200.c
index 158fb97..e4ed62c 100644
--- a/arch/arm/mach-kirkwood/board-iomega_ix2_200.c
+++ b/arch/arm/mach-kirkwood/board-iomega_ix2_200.c
@@ -10,10 +10,8 @@
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/platform_device.h>
#include <linux/mv643xx_eth.h>
#include <linux/ethtool.h>
-#include <mach/kirkwood.h>
#include "common.h"
#include "mpp.h"
diff --git a/arch/arm/mach-kirkwood/board-lsxl.c b/arch/arm/mach-kirkwood/board-lsxl.c
index 83d8975..64e5cc6 100644
--- a/arch/arm/mach-kirkwood/board-lsxl.c
+++ b/arch/arm/mach-kirkwood/board-lsxl.c
@@ -14,17 +14,9 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/mtd/partitions.h>
-#include <linux/ata_platform.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
#include <linux/mv643xx_eth.h>
#include <linux/gpio.h>
#include <linux/gpio-fan.h>
-#include <linux/input.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
#include "common.h"
#include "mpp.h"
diff --git a/arch/arm/mach-kirkwood/board-ts219.c b/arch/arm/mach-kirkwood/board-ts219.c
index 1750e68..f3bfeda 100644
--- a/arch/arm/mach-kirkwood/board-ts219.c
+++ b/arch/arm/mach-kirkwood/board-ts219.c
@@ -19,9 +19,6 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/mv643xx_eth.h>
-#include <linux/ata_platform.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index 2c6c218..f0fc25b 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -18,10 +18,10 @@
#include <linux/clk-provider.h>
#include <linux/spinlock.h>
#include <linux/mv643xx_i2c.h>
+#include <linux/timex.h>
+#include <linux/kexec.h>
#include <net/dsa.h>
#include <asm/page.h>
-#include <asm/timex.h>
-#include <asm/kexec.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include <mach/kirkwood.h>
@@ -425,7 +425,7 @@
/*****************************************************************************
* SPI
****************************************************************************/
-void __init kirkwood_spi_init()
+void __init kirkwood_spi_init(void)
{
orion_spi_init(SPI_PHYS_BASE);
}
@@ -646,8 +646,7 @@
void __init kirkwood_init(void)
{
- printk(KERN_INFO "Kirkwood: %s, TCLK=%d.\n",
- kirkwood_id(), kirkwood_tclk);
+ pr_info("Kirkwood: %s, TCLK=%d.\n", kirkwood_id(), kirkwood_tclk);
/*
* Disable propagation of mbus errors to the CPU local bus,
@@ -671,7 +670,7 @@
kirkwood_xor1_init();
kirkwood_crypto_init();
-#ifdef CONFIG_KEXEC
+#ifdef CONFIG_KEXEC
kexec_reinit = kirkwood_enable_pcie;
#endif
}
diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h
index bcffd7c..6088e92 100644
--- a/arch/arm/mach-kirkwood/common.h
+++ b/arch/arm/mach-kirkwood/common.h
@@ -47,7 +47,8 @@
void kirkwood_uart0_init(void);
void kirkwood_uart1_init(void);
void kirkwood_nand_init(struct mtd_partition *parts, int nr_parts, int delay);
-void kirkwood_nand_init_rnb(struct mtd_partition *parts, int nr_parts, int (*dev_ready)(struct mtd_info *));
+void kirkwood_nand_init_rnb(struct mtd_partition *parts, int nr_parts,
+ int (*dev_ready)(struct mtd_info *));
void kirkwood_audio_init(void);
void kirkwood_restart(char, const char *);
void kirkwood_clk_init(void);
diff --git a/arch/arm/mach-kirkwood/cpuidle.c b/arch/arm/mach-kirkwood/cpuidle.c
index 0f17109..f730467 100644
--- a/arch/arm/mach-kirkwood/cpuidle.c
+++ b/arch/arm/mach-kirkwood/cpuidle.c
@@ -64,7 +64,7 @@
cpuidle_register_driver(&kirkwood_idle_driver);
if (cpuidle_register_device(device)) {
- printk(KERN_ERR "kirkwood_init_cpuidle: Failed registering\n");
+ pr_err("kirkwood_init_cpuidle: Failed registering\n");
return -EIO;
}
return 0;
diff --git a/arch/arm/mach-kirkwood/dockstar-setup.c b/arch/arm/mach-kirkwood/dockstar-setup.c
index 23dcb19..791a98f 100644
--- a/arch/arm/mach-kirkwood/dockstar-setup.c
+++ b/arch/arm/mach-kirkwood/dockstar-setup.c
@@ -93,7 +93,7 @@
if (gpio_request(29, "USB Power Enable") != 0 ||
gpio_direction_output(29, 1) != 0)
- printk(KERN_ERR "can't set up GPIO 29 (USB Power Enable)\n");
+ pr_err("can't set up GPIO 29 (USB Power Enable)\n");
kirkwood_ehci_init();
kirkwood_ge00_init(&dockstar_ge00_data);
diff --git a/arch/arm/mach-kirkwood/irq.c b/arch/arm/mach-kirkwood/irq.c
index 8847035..2a97a2e 100644
--- a/arch/arm/mach-kirkwood/irq.c
+++ b/arch/arm/mach-kirkwood/irq.c
@@ -14,6 +14,7 @@
#include <mach/bridge-regs.h>
#include <plat/orion-gpio.h>
#include <plat/irq.h>
+#include "common.h"
static int __initdata gpio0_irqs[4] = {
IRQ_KIRKWOOD_GPIO_LOW_0_7,
diff --git a/arch/arm/mach-kirkwood/lacie_v2-common.c b/arch/arm/mach-kirkwood/lacie_v2-common.c
index 285edab..4894959 100644
--- a/arch/arm/mach-kirkwood/lacie_v2-common.c
+++ b/arch/arm/mach-kirkwood/lacie_v2-common.c
@@ -19,6 +19,7 @@
#include <mach/irqs.h>
#include <plat/time.h>
#include "common.h"
+#include "lacie_v2-common.h"
/*****************************************************************************
* 512KB SPI Flash on Boot Device (MACRONIX MX25L4005)
diff --git a/arch/arm/mach-kirkwood/mpp.c b/arch/arm/mach-kirkwood/mpp.c
index 0c6ad63..827cde4 100644
--- a/arch/arm/mach-kirkwood/mpp.c
+++ b/arch/arm/mach-kirkwood/mpp.c
@@ -30,8 +30,8 @@
if (dev == MV88F6180_DEV_ID)
return MPP_F6180_MASK;
- printk(KERN_ERR "MPP setup: unknown kirkwood variant "
- "(dev %#x rev %#x)\n", dev, rev);
+ pr_err("MPP setup: unknown kirkwood variant (dev %#x rev %#x)\n",
+ dev, rev);
return 0;
}
diff --git a/arch/arm/mach-kirkwood/netspace_v2-setup.c b/arch/arm/mach-kirkwood/netspace_v2-setup.c
index 88b0788b..728e86d 100644
--- a/arch/arm/mach-kirkwood/netspace_v2-setup.c
+++ b/arch/arm/mach-kirkwood/netspace_v2-setup.c
@@ -79,7 +79,7 @@
.name = "gpio-keys",
.id = -1,
.dev = {
- .platform_data = &netspace_v2_button_data,
+ .platform_data = &netspace_v2_button_data,
},
};
@@ -211,7 +211,7 @@
MPP29_GPIO, /* Blue led (slow register) */
MPP30_GPIO, /* Blue led (command register) */
MPP31_GPIO, /* Board power off */
- MPP32_GPIO, /* Power button (0 = Released, 1 = Pushed) */
+ MPP32_GPIO, /* Power button (0 = Released, 1 = Pushed) */
MPP33_GPO, /* Fan speed (bit 2) */
0
};
diff --git a/arch/arm/mach-kirkwood/openrd-setup.c b/arch/arm/mach-kirkwood/openrd-setup.c
index 134ef50..7e81e9b 100644
--- a/arch/arm/mach-kirkwood/openrd-setup.c
+++ b/arch/arm/mach-kirkwood/openrd-setup.c
@@ -121,14 +121,12 @@
kirkwood_mpp_conf(openrd_uart1_mpp_config);
if (gpio_request(34, "SD_UART1_SEL")) {
- printk(KERN_ERR "GPIO request failed for SD/UART1 selection"
- ", gpio: 34\n");
+ pr_err("GPIO request 34 failed for SD/UART1 selection\n");
return -EIO;
}
if (gpio_request(28, "RS232_RS485_SEL")) {
- printk(KERN_ERR "GPIO request failed for RS232/RS485 selection"
- ", gpio# 28\n");
+ pr_err("GPIO request 28 failed for RS232/RS485 selection\n");
gpio_free(34);
return -EIO;
}
@@ -185,15 +183,13 @@
if (uart1 <= 0) {
if (uart1 < 0)
- printk(KERN_ERR "Invalid kernel parameter to select "
- "UART1. Defaulting to SD. ERROR CODE: %d\n",
- uart1);
+ pr_err("Invalid kernel parameter to select UART1. Defaulting to SD. ERROR CODE: %d\n",
+ uart1);
/* Select SD
* Pin # 34: 0 => UART1, 1 => SD */
if (gpio_request(34, "SD_UART1_SEL")) {
- printk(KERN_ERR "GPIO request failed for SD/UART1 "
- "selection, gpio: 34\n");
+ pr_err("GPIO request 34 failed for SD/UART1 selection\n");
} else {
gpio_direction_output(34, 1);
diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c
index ec54491..1e9f90e 100644
--- a/arch/arm/mach-kirkwood/pcie.c
+++ b/arch/arm/mach-kirkwood/pcie.c
@@ -26,7 +26,7 @@
clk = clk_get_sys("pcie", port);
if (IS_ERR(clk)) {
- printk(KERN_ERR "PCIE clock %s missing\n", port);
+ pr_err("PCIE clock %s missing\n", port);
return;
}
clk_prepare_enable(clk);
@@ -168,7 +168,7 @@
return 0;
index = pcie_port_map[nr];
- printk(KERN_INFO "PCI: bus%d uses PCIe port %d\n", sys->busnr, index);
+ pr_info("PCI: bus%d uses PCIe port %d\n", sys->busnr, index);
pp = kzalloc(sizeof(*pp), GFP_KERNEL);
if (!pp)
@@ -186,7 +186,8 @@
case 1:
kirkwood_enable_pcie_clk("1");
pcie1_ioresources_init(pp);
- pci_ioremap_io(SZ_64K * sys->busnr, KIRKWOOD_PCIE1_IO_PHYS_BASE);
+ pci_ioremap_io(SZ_64K * sys->busnr,
+ KIRKWOOD_PCIE1_IO_PHYS_BASE);
break;
default:
panic("PCIe setup: invalid controller %d", index);
@@ -224,22 +225,6 @@
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_ANY_ID, rc_pci_fixup);
-static struct pci_bus __init *
-kirkwood_pcie_scan_bus(int nr, struct pci_sys_data *sys)
-{
- struct pci_bus *bus;
-
- if (nr < num_pcie_ports) {
- bus = pci_scan_root_bus(NULL, sys->busnr, &pcie_ops, sys,
- &sys->resources);
- } else {
- bus = NULL;
- BUG();
- }
-
- return bus;
-}
-
static int __init kirkwood_pcie_map_irq(const struct pci_dev *dev, u8 slot,
u8 pin)
{
@@ -251,19 +236,19 @@
static struct hw_pci kirkwood_pci __initdata = {
.setup = kirkwood_pcie_setup,
- .scan = kirkwood_pcie_scan_bus,
.map_irq = kirkwood_pcie_map_irq,
+ .ops = &pcie_ops,
};
static void __init add_pcie_port(int index, void __iomem *base)
{
- printk(KERN_INFO "Kirkwood PCIe port %d: ", index);
+ pr_info("Kirkwood PCIe port %d: ", index);
if (orion_pcie_link_up(base)) {
- printk(KERN_INFO "link up\n");
+ pr_info("link up\n");
pcie_port_map[num_pcie_ports++] = index;
} else
- printk(KERN_INFO "link down, ignoring\n");
+ pr_info("link down, ignoring\n");
}
void __init kirkwood_pcie_init(unsigned int portmask)
diff --git a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c
index 28d0aba..8a17594 100644
--- a/arch/arm/mach-kirkwood/sheevaplug-setup.c
+++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c
@@ -117,7 +117,7 @@
if (gpio_request(29, "USB Power Enable") != 0 ||
gpio_direction_output(29, 1) != 0)
- printk(KERN_ERR "can't set up GPIO 29 (USB Power Enable)\n");
+ pr_err("can't set up GPIO 29 (USB Power Enable)\n");
kirkwood_ehci_init();
kirkwood_ge00_init(&sheevaplug_ge00_data);
diff --git a/arch/arm/mach-kirkwood/t5325-setup.c b/arch/arm/mach-kirkwood/t5325-setup.c
index bad738e..f2daf711e 100644
--- a/arch/arm/mach-kirkwood/t5325-setup.c
+++ b/arch/arm/mach-kirkwood/t5325-setup.c
@@ -29,7 +29,7 @@
#include "common.h"
#include "mpp.h"
-struct mtd_partition hp_t5325_partitions[] = {
+static struct mtd_partition hp_t5325_partitions[] = {
{
.name = "u-boot env",
.size = SZ_64K,
@@ -59,14 +59,14 @@
},
};
-const struct flash_platform_data hp_t5325_flash = {
+static const struct flash_platform_data hp_t5325_flash = {
.type = "mx25l8005",
.name = "spi_flash",
.parts = hp_t5325_partitions,
.nr_parts = ARRAY_SIZE(hp_t5325_partitions),
};
-struct spi_board_info __initdata hp_t5325_spi_slave_info[] = {
+static struct spi_board_info __initdata hp_t5325_spi_slave_info[] = {
{
.modalias = "m25p80",
.platform_data = &hp_t5325_flash,
diff --git a/arch/arm/mach-kirkwood/ts41x-setup.c b/arch/arm/mach-kirkwood/ts41x-setup.c
index 367a940..e4c6127 100644
--- a/arch/arm/mach-kirkwood/ts41x-setup.c
+++ b/arch/arm/mach-kirkwood/ts41x-setup.c
@@ -170,8 +170,7 @@
else
kirkwood_pcie_init(KW_PCIE0);
}
-
- return 0;
+ return 0;
}
subsys_initcall(ts41x_pci_init);
diff --git a/arch/arm/mach-kirkwood/tsx1x-common.c b/arch/arm/mach-kirkwood/tsx1x-common.c
index 8943ede..cec87ce 100644
--- a/arch/arm/mach-kirkwood/tsx1x-common.c
+++ b/arch/arm/mach-kirkwood/tsx1x-common.c
@@ -7,6 +7,7 @@
#include <linux/serial_reg.h>
#include <mach/kirkwood.h>
#include "common.h"
+#include "tsx1x-common.h"
/*
* QNAP TS-x1x Boards flash
@@ -29,7 +30,7 @@
*
***************************************************************************/
-struct mtd_partition qnap_tsx1x_partitions[] = {
+static struct mtd_partition qnap_tsx1x_partitions[] = {
{
.name = "U-Boot",
.size = 0x00080000,
@@ -58,14 +59,14 @@
},
};
-const struct flash_platform_data qnap_tsx1x_flash = {
+static const struct flash_platform_data qnap_tsx1x_flash = {
.type = "m25p128",
.name = "spi_flash",
.parts = qnap_tsx1x_partitions,
.nr_parts = ARRAY_SIZE(qnap_tsx1x_partitions),
};
-struct spi_board_info __initdata qnap_tsx1x_spi_slave_info[] = {
+static struct spi_board_info __initdata qnap_tsx1x_spi_slave_info[] = {
{
.modalias = "m25p80",
.platform_data = &qnap_tsx1x_flash,
diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile
index cd169c3..f0e69cb 100644
--- a/arch/arm/mach-omap1/Makefile
+++ b/arch/arm/mach-omap1/Makefile
@@ -3,7 +3,8 @@
#
# Common support
-obj-y := io.o id.o sram.o time.o irq.o mux.o flash.o serial.o devices.o dma.o
+obj-y := io.o id.o sram-init.o sram.o time.o irq.o mux.o flash.o \
+ serial.o devices.o dma.o
obj-y += clock.o clock_data.o opp_data.o reset.o pm_bus.o timer.o
ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),)
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index e255164f..a8fce3c 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -625,7 +625,6 @@
.atag_offset = 0x100,
.map_io = ams_delta_map_io,
.init_early = omap1_init_early,
- .reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = ams_delta_init,
.init_late = ams_delta_init_late,
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index 4b6de70..e067f22 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -27,16 +27,16 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
#include <mach/mux.h>
#include <mach/flash.h>
-#include <plat/fpga.h>
#include <linux/platform_data/keypad-omap.h>
#include <mach/hardware.h>
#include "iomap.h"
#include "common.h"
+#include "fpga.h"
/* fsample is pretty close to p2-sample */
@@ -123,9 +123,9 @@
static void __init fsample_init_smc91x(void)
{
- fpga_write(1, H2P2_DBG_FPGA_LAN_RESET);
+ __raw_writeb(1, H2P2_DBG_FPGA_LAN_RESET);
mdelay(50);
- fpga_write(fpga_read(H2P2_DBG_FPGA_LAN_RESET) & ~1,
+ __raw_writeb(__raw_readb(H2P2_DBG_FPGA_LAN_RESET) & ~1,
H2P2_DBG_FPGA_LAN_RESET);
mdelay(50);
}
@@ -362,7 +362,6 @@
.atag_offset = 0x100,
.map_io = omap_fsample_map_io,
.init_early = omap1_init_early,
- .reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = omap_fsample_init,
.init_late = omap1_init_late,
diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
index 4ec579f..608e7d2 100644
--- a/arch/arm/mach-omap1/board-generic.c
+++ b/arch/arm/mach-omap1/board-generic.c
@@ -81,7 +81,6 @@
.atag_offset = 0x100,
.map_io = omap16xx_map_io,
.init_early = omap1_init_early,
- .reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = omap_generic_init,
.init_late = omap1_init_late,
diff --git a/arch/arm/mach-omap1/board-h2-mmc.c b/arch/arm/mach-omap1/board-h2-mmc.c
index e1362ce..7119ef2 100644
--- a/arch/arm/mach-omap1/board-h2-mmc.c
+++ b/arch/arm/mach-omap1/board-h2-mmc.c
@@ -13,12 +13,11 @@
*/
#include <linux/gpio.h>
#include <linux/platform_device.h>
-
+#include <linux/platform_data/gpio-omap.h>
#include <linux/i2c/tps65010.h>
-#include <plat/mmc.h>
-
#include "board-h2.h"
+#include "mmc.h"
#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index 376f7f2..9134b64 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -39,8 +39,8 @@
#include <asm/mach/map.h>
#include <mach/mux.h>
-#include <plat/dma.h>
-#include <plat/tc.h>
+#include <plat-omap/dma-omap.h>
+#include <mach/tc.h>
#include <mach/irda.h>
#include <linux/platform_data/keypad-omap.h>
#include <mach/flash.h>
@@ -50,6 +50,7 @@
#include "common.h"
#include "board-h2.h"
+#include "dma.h"
/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
#define OMAP1610_ETHR_START 0x04000300
@@ -458,7 +459,6 @@
.atag_offset = 0x100,
.map_io = omap16xx_map_io,
.init_early = omap1_init_early,
- .reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = h2_init,
.init_late = omap1_init_late,
diff --git a/arch/arm/mach-omap1/board-h3-mmc.c b/arch/arm/mach-omap1/board-h3-mmc.c
index c74daac..17d7791 100644
--- a/arch/arm/mach-omap1/board-h3-mmc.c
+++ b/arch/arm/mach-omap1/board-h3-mmc.c
@@ -16,9 +16,8 @@
#include <linux/i2c/tps65010.h>
-#include <plat/mmc.h>
-
#include "board-h3.h"
+#include "mmc.h"
#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index ededdb7..bf213d1 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -41,9 +41,9 @@
#include <asm/mach/map.h>
#include <mach/mux.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
#include <linux/platform_data/keypad-omap.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
#include <mach/flash.h>
#include <mach/hardware.h>
@@ -452,7 +452,6 @@
.atag_offset = 0x100,
.map_io = omap16xx_map_io,
.init_early = omap1_init_early,
- .reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = h3_init,
.init_late = omap1_init_late,
diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c
index 87ab208..356f816 100644
--- a/arch/arm/mach-omap1/board-htcherald.c
+++ b/arch/arm/mach-omap1/board-htcherald.c
@@ -43,7 +43,7 @@
#include <asm/mach/arch.h>
#include <mach/omap7xx.h>
-#include <plat/mmc.h>
+#include "mmc.h"
#include <mach/irqs.h>
#include <mach/usb.h>
@@ -600,7 +600,6 @@
.atag_offset = 0x100,
.map_io = htcherald_map_io,
.init_early = omap1_init_early,
- .reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = htcherald_init,
.init_late = omap1_init_late,
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index db5f7d2..f8033fa 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -33,16 +33,15 @@
#include <mach/mux.h>
#include <mach/flash.h>
-#include <plat/fpga.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
#include <linux/platform_data/keypad-omap.h>
-#include <plat/mmc.h>
#include <mach/hardware.h>
#include <mach/usb.h>
#include "iomap.h"
#include "common.h"
+#include "mmc.h"
/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
#define INNOVATOR1610_ETHR_START 0x04000300
@@ -215,7 +214,7 @@
static int innovator_get_pendown_state(void)
{
- return !(fpga_read(OMAP1510_FPGA_TOUCHSCREEN) & (1 << 5));
+ return !(__raw_readb(OMAP1510_FPGA_TOUCHSCREEN) & (1 << 5));
}
static const struct ads7846_platform_data innovator1510_ts_info = {
@@ -279,7 +278,7 @@
static void __init innovator_init_smc91x(void)
{
if (cpu_is_omap1510()) {
- fpga_write(fpga_read(OMAP1510_FPGA_RST) & ~1,
+ __raw_writeb(__raw_readb(OMAP1510_FPGA_RST) & ~1,
OMAP1510_FPGA_RST);
udelay(750);
} else {
@@ -335,10 +334,10 @@
int vdd)
{
if (power_on)
- fpga_write(fpga_read(OMAP1510_FPGA_POWER) | (1 << 3),
+ __raw_writeb(__raw_readb(OMAP1510_FPGA_POWER) | (1 << 3),
OMAP1510_FPGA_POWER);
else
- fpga_write(fpga_read(OMAP1510_FPGA_POWER) & ~(1 << 3),
+ __raw_writeb(__raw_readb(OMAP1510_FPGA_POWER) & ~(1 << 3),
OMAP1510_FPGA_POWER);
return 0;
@@ -390,14 +389,14 @@
omap_cfg_reg(UART3_TX);
omap_cfg_reg(UART3_RX);
- reg = fpga_read(OMAP1510_FPGA_POWER);
+ reg = __raw_readb(OMAP1510_FPGA_POWER);
reg |= OMAP1510_FPGA_PCR_COM1_EN;
- fpga_write(reg, OMAP1510_FPGA_POWER);
+ __raw_writeb(reg, OMAP1510_FPGA_POWER);
udelay(10);
- reg = fpga_read(OMAP1510_FPGA_POWER);
+ reg = __raw_readb(OMAP1510_FPGA_POWER);
reg |= OMAP1510_FPGA_PCR_COM2_EN;
- fpga_write(reg, OMAP1510_FPGA_POWER);
+ __raw_writeb(reg, OMAP1510_FPGA_POWER);
udelay(10);
platform_add_devices(innovator1510_devices, ARRAY_SIZE(innovator1510_devices));
@@ -437,6 +436,7 @@
*/
static void __init innovator_map_io(void)
{
+#ifdef CONFIG_ARCH_OMAP15XX
omap15xx_map_io();
iotable_init(innovator1510_io_desc, ARRAY_SIZE(innovator1510_io_desc));
@@ -444,9 +444,10 @@
/* Dump the Innovator FPGA rev early - useful info for support. */
pr_debug("Innovator FPGA Rev %d.%d Board Rev %d\n",
- fpga_read(OMAP1510_FPGA_REV_HIGH),
- fpga_read(OMAP1510_FPGA_REV_LOW),
- fpga_read(OMAP1510_FPGA_BOARD_REV));
+ __raw_readb(OMAP1510_FPGA_REV_HIGH),
+ __raw_readb(OMAP1510_FPGA_REV_LOW),
+ __raw_readb(OMAP1510_FPGA_BOARD_REV));
+#endif
}
MACHINE_START(OMAP_INNOVATOR, "TI-Innovator")
@@ -454,7 +455,6 @@
.atag_offset = 0x100,
.map_io = innovator_map_io,
.init_early = omap1_init_early,
- .reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = innovator_init,
.init_late = omap1_init_late,
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index 7d5c06d6..3e8ead6 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -29,13 +29,13 @@
#include <asm/mach/map.h>
#include <mach/mux.h>
-#include <plat/mmc.h>
-#include <plat/clock.h>
#include <mach/hardware.h>
#include <mach/usb.h>
#include "common.h"
+#include "clock.h"
+#include "mmc.h"
#define ADS7846_PENDOWN_GPIO 15
@@ -251,7 +251,6 @@
.atag_offset = 0x100,
.map_io = omap16xx_map_io,
.init_early = omap1_init_early,
- .reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = omap_nokia770_init,
.init_late = omap1_init_late,
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 5973945..872ea47 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -48,7 +48,7 @@
#include <mach/flash.h>
#include <mach/mux.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
#include <mach/hardware.h>
#include <mach/usb.h>
@@ -606,7 +606,6 @@
.atag_offset = 0x100,
.map_io = omap16xx_map_io,
.init_early = omap1_init_early,
- .reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = osk_init,
.init_late = omap1_init_late,
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index 1c578d5..584b6fa 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -36,8 +36,8 @@
#include <mach/flash.h>
#include <mach/mux.h>
-#include <plat/tc.h>
-#include <plat/dma.h>
+#include <mach/tc.h>
+#include <plat-omap/dma-omap.h>
#include <mach/irda.h>
#include <linux/platform_data/keypad-omap.h>
@@ -45,6 +45,7 @@
#include <mach/usb.h>
#include "common.h"
+#include "dma.h"
#define PALMTE_USBDETECT_GPIO 0
#define PALMTE_USB_OR_DC_GPIO 1
@@ -264,7 +265,6 @@
.atag_offset = 0x100,
.map_io = omap15xx_map_io,
.init_early = omap1_init_early,
- .reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = omap_palmte_init,
.init_late = omap1_init_late,
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index 9715809..fbc986b 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -28,16 +28,16 @@
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <linux/platform_data/omap1_bl.h>
+#include <linux/platform_data/leds-omap.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/led.h>
#include <mach/flash.h>
#include <mach/mux.h>
-#include <plat/dma.h>
-#include <plat/tc.h>
+#include <plat-omap/dma-omap.h>
+#include <mach/tc.h>
#include <mach/irda.h>
#include <linux/platform_data/keypad-omap.h>
@@ -45,6 +45,7 @@
#include <mach/usb.h>
#include "common.h"
+#include "dma.h"
#define PALMTT_USBDETECT_GPIO 0
#define PALMTT_CABLE_GPIO 1
@@ -310,7 +311,6 @@
.atag_offset = 0x100,
.map_io = omap15xx_map_io,
.init_early = omap1_init_early,
- .reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = omap_palmtt_init,
.init_late = omap1_init_late,
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index e311032..60d917a 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -38,8 +38,8 @@
#include <mach/flash.h>
#include <mach/mux.h>
-#include <plat/dma.h>
-#include <plat/tc.h>
+#include <plat-omap/dma-omap.h>
+#include <mach/tc.h>
#include <mach/irda.h>
#include <linux/platform_data/keypad-omap.h>
@@ -47,6 +47,7 @@
#include <mach/usb.h>
#include "common.h"
+#include "dma.h"
#define PALMZ71_USBDETECT_GPIO 0
#define PALMZ71_PENIRQ_GPIO 6
@@ -326,7 +327,6 @@
.atag_offset = 0x100,
.map_io = omap15xx_map_io,
.init_early = omap1_init_early,
- .reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = omap_palmz71_init,
.init_late = omap1_init_late,
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index 198b054..9a7e483 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -28,15 +28,15 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
#include <mach/mux.h>
-#include <plat/fpga.h>
#include <mach/flash.h>
#include <mach/hardware.h>
#include "iomap.h"
#include "common.h"
+#include "fpga.h"
static const unsigned int p2_keymap[] = {
KEY(0, 0, KEY_UP),
@@ -231,9 +231,9 @@
static void __init perseus2_init_smc91x(void)
{
- fpga_write(1, H2P2_DBG_FPGA_LAN_RESET);
+ __raw_writeb(1, H2P2_DBG_FPGA_LAN_RESET);
mdelay(50);
- fpga_write(fpga_read(H2P2_DBG_FPGA_LAN_RESET) & ~1,
+ __raw_writeb(__raw_readb(H2P2_DBG_FPGA_LAN_RESET) & ~1,
H2P2_DBG_FPGA_LAN_RESET);
mdelay(50);
}
@@ -324,7 +324,6 @@
.atag_offset = 0x100,
.map_io = omap_perseus2_map_io,
.init_early = omap1_init_early,
- .reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = omap_perseus2_init,
.init_late = omap1_init_late,
diff --git a/arch/arm/mach-omap1/board-sx1-mmc.c b/arch/arm/mach-omap1/board-sx1-mmc.c
index 5932d56..4fcf19c 100644
--- a/arch/arm/mach-omap1/board-sx1-mmc.c
+++ b/arch/arm/mach-omap1/board-sx1-mmc.c
@@ -16,9 +16,10 @@
#include <linux/platform_device.h>
#include <mach/hardware.h>
-#include <plat/mmc.h>
#include <mach/board-sx1.h>
+#include "mmc.h"
+
#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
static int mmc_set_power(struct device *dev, int slot, int power_on,
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index 13bf2cc..1ebc7e0 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -36,15 +36,16 @@
#include <mach/flash.h>
#include <mach/mux.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
#include <mach/irda.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
#include <mach/board-sx1.h>
#include <mach/hardware.h>
#include <mach/usb.h>
#include "common.h"
+#include "dma.h"
/* Write to I2C device */
int sx1_i2c_write_byte(u8 devaddr, u8 regoffset, u8 value)
@@ -403,7 +404,6 @@
.atag_offset = 0x100,
.map_io = omap15xx_map_io,
.init_early = omap1_init_early,
- .reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = omap_sx1_init,
.init_late = omap1_init_late,
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index ad75e34..abf705f 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -34,7 +34,7 @@
#include <mach/board-voiceblue.h>
#include <mach/flash.h>
#include <mach/mux.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
#include <mach/hardware.h>
#include <mach/usb.h>
@@ -286,7 +286,6 @@
.atag_offset = 0x100,
.map_io = omap15xx_map_io,
.init_early = omap1_init_early,
- .reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = voiceblue_init,
.init_late = omap1_init_late,
diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index 638f407..4f5fd4a 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -12,6 +12,7 @@
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
+#include <linux/export.h>
#include <linux/list.h>
#include <linux/errno.h>
#include <linux/err.h>
@@ -21,21 +22,21 @@
#include <asm/mach-types.h>
-#include <plat/cpu.h>
-#include <plat/usb.h>
-#include <plat/clock.h>
-#include <plat/sram.h>
-#include <plat/clkdev_omap.h>
-
#include <mach/hardware.h>
+#include "soc.h"
#include "iomap.h"
#include "clock.h"
#include "opp.h"
+#include "sram.h"
__u32 arm_idlect1_mask;
struct clk *api_ck_p, *ck_dpll1_p, *ck_ref_p;
+static LIST_HEAD(clocks);
+static DEFINE_MUTEX(clocks_mutex);
+static DEFINE_SPINLOCK(clockfw_lock);
+
/*
* Omap1 specific clock functions
*/
@@ -607,3 +608,497 @@
}
#endif
+
+
+int clk_enable(struct clk *clk)
+{
+ unsigned long flags;
+ int ret;
+
+ if (clk == NULL || IS_ERR(clk))
+ return -EINVAL;
+
+ spin_lock_irqsave(&clockfw_lock, flags);
+ ret = omap1_clk_enable(clk);
+ spin_unlock_irqrestore(&clockfw_lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+ unsigned long flags;
+
+ if (clk == NULL || IS_ERR(clk))
+ return;
+
+ spin_lock_irqsave(&clockfw_lock, flags);
+ if (clk->usecount == 0) {
+ pr_err("Trying disable clock %s with 0 usecount\n",
+ clk->name);
+ WARN_ON(1);
+ goto out;
+ }
+
+ omap1_clk_disable(clk);
+
+out:
+ spin_unlock_irqrestore(&clockfw_lock, flags);
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+ unsigned long flags;
+ unsigned long ret;
+
+ if (clk == NULL || IS_ERR(clk))
+ return 0;
+
+ spin_lock_irqsave(&clockfw_lock, flags);
+ ret = clk->rate;
+ spin_unlock_irqrestore(&clockfw_lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+/*
+ * Optional clock functions defined in include/linux/clk.h
+ */
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+ unsigned long flags;
+ long ret;
+
+ if (clk == NULL || IS_ERR(clk))
+ return 0;
+
+ spin_lock_irqsave(&clockfw_lock, flags);
+ ret = omap1_clk_round_rate(clk, rate);
+ spin_unlock_irqrestore(&clockfw_lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ unsigned long flags;
+ int ret = -EINVAL;
+
+ if (clk == NULL || IS_ERR(clk))
+ return ret;
+
+ spin_lock_irqsave(&clockfw_lock, flags);
+ ret = omap1_clk_set_rate(clk, rate);
+ if (ret == 0)
+ propagate_rate(clk);
+ spin_unlock_irqrestore(&clockfw_lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+ WARN_ONCE(1, "clk_set_parent() not implemented for OMAP1\n");
+
+ return -EINVAL;
+}
+EXPORT_SYMBOL(clk_set_parent);
+
+struct clk *clk_get_parent(struct clk *clk)
+{
+ return clk->parent;
+}
+EXPORT_SYMBOL(clk_get_parent);
+
+/*
+ * OMAP specific clock functions shared between omap1 and omap2
+ */
+
+int __initdata mpurate;
+
+/*
+ * By default we use the rate set by the bootloader.
+ * You can override this with mpurate= cmdline option.
+ */
+static int __init omap_clk_setup(char *str)
+{
+ get_option(&str, &mpurate);
+
+ if (!mpurate)
+ return 1;
+
+ if (mpurate < 1000)
+ mpurate *= 1000000;
+
+ return 1;
+}
+__setup("mpurate=", omap_clk_setup);
+
+/* Used for clocks that always have same value as the parent clock */
+unsigned long followparent_recalc(struct clk *clk)
+{
+ return clk->parent->rate;
+}
+
+/*
+ * Used for clocks that have the same value as the parent clock,
+ * divided by some factor
+ */
+unsigned long omap_fixed_divisor_recalc(struct clk *clk)
+{
+ WARN_ON(!clk->fixed_div);
+
+ return clk->parent->rate / clk->fixed_div;
+}
+
+void clk_reparent(struct clk *child, struct clk *parent)
+{
+ list_del_init(&child->sibling);
+ if (parent)
+ list_add(&child->sibling, &parent->children);
+ child->parent = parent;
+
+ /* now do the debugfs renaming to reattach the child
+ to the proper parent */
+}
+
+/* Propagate rate to children */
+void propagate_rate(struct clk *tclk)
+{
+ struct clk *clkp;
+
+ list_for_each_entry(clkp, &tclk->children, sibling) {
+ if (clkp->recalc)
+ clkp->rate = clkp->recalc(clkp);
+ propagate_rate(clkp);
+ }
+}
+
+static LIST_HEAD(root_clks);
+
+/**
+ * recalculate_root_clocks - recalculate and propagate all root clocks
+ *
+ * Recalculates all root clocks (clocks with no parent), which if the
+ * clock's .recalc is set correctly, should also propagate their rates.
+ * Called at init.
+ */
+void recalculate_root_clocks(void)
+{
+ struct clk *clkp;
+
+ list_for_each_entry(clkp, &root_clks, sibling) {
+ if (clkp->recalc)
+ clkp->rate = clkp->recalc(clkp);
+ propagate_rate(clkp);
+ }
+}
+
+/**
+ * clk_preinit - initialize any fields in the struct clk before clk init
+ * @clk: struct clk * to initialize
+ *
+ * Initialize any struct clk fields needed before normal clk initialization
+ * can run. No return value.
+ */
+void clk_preinit(struct clk *clk)
+{
+ INIT_LIST_HEAD(&clk->children);
+}
+
+int clk_register(struct clk *clk)
+{
+ if (clk == NULL || IS_ERR(clk))
+ return -EINVAL;
+
+ /*
+ * trap out already registered clocks
+ */
+ if (clk->node.next || clk->node.prev)
+ return 0;
+
+ mutex_lock(&clocks_mutex);
+ if (clk->parent)
+ list_add(&clk->sibling, &clk->parent->children);
+ else
+ list_add(&clk->sibling, &root_clks);
+
+ list_add(&clk->node, &clocks);
+ if (clk->init)
+ clk->init(clk);
+ mutex_unlock(&clocks_mutex);
+
+ return 0;
+}
+EXPORT_SYMBOL(clk_register);
+
+void clk_unregister(struct clk *clk)
+{
+ if (clk == NULL || IS_ERR(clk))
+ return;
+
+ mutex_lock(&clocks_mutex);
+ list_del(&clk->sibling);
+ list_del(&clk->node);
+ mutex_unlock(&clocks_mutex);
+}
+EXPORT_SYMBOL(clk_unregister);
+
+void clk_enable_init_clocks(void)
+{
+ struct clk *clkp;
+
+ list_for_each_entry(clkp, &clocks, node)
+ if (clkp->flags & ENABLE_ON_INIT)
+ clk_enable(clkp);
+}
+
+/**
+ * omap_clk_get_by_name - locate OMAP struct clk by its name
+ * @name: name of the struct clk to locate
+ *
+ * Locate an OMAP struct clk by its name. Assumes that struct clk
+ * names are unique. Returns NULL if not found or a pointer to the
+ * struct clk if found.
+ */
+struct clk *omap_clk_get_by_name(const char *name)
+{
+ struct clk *c;
+ struct clk *ret = NULL;
+
+ mutex_lock(&clocks_mutex);
+
+ list_for_each_entry(c, &clocks, node) {
+ if (!strcmp(c->name, name)) {
+ ret = c;
+ break;
+ }
+ }
+
+ mutex_unlock(&clocks_mutex);
+
+ return ret;
+}
+
+int omap_clk_enable_autoidle_all(void)
+{
+ struct clk *c;
+ unsigned long flags;
+
+ spin_lock_irqsave(&clockfw_lock, flags);
+
+ list_for_each_entry(c, &clocks, node)
+ if (c->ops->allow_idle)
+ c->ops->allow_idle(c);
+
+ spin_unlock_irqrestore(&clockfw_lock, flags);
+
+ return 0;
+}
+
+int omap_clk_disable_autoidle_all(void)
+{
+ struct clk *c;
+ unsigned long flags;
+
+ spin_lock_irqsave(&clockfw_lock, flags);
+
+ list_for_each_entry(c, &clocks, node)
+ if (c->ops->deny_idle)
+ c->ops->deny_idle(c);
+
+ spin_unlock_irqrestore(&clockfw_lock, flags);
+
+ return 0;
+}
+
+/*
+ * Low level helpers
+ */
+static int clkll_enable_null(struct clk *clk)
+{
+ return 0;
+}
+
+static void clkll_disable_null(struct clk *clk)
+{
+}
+
+const struct clkops clkops_null = {
+ .enable = clkll_enable_null,
+ .disable = clkll_disable_null,
+};
+
+/*
+ * Dummy clock
+ *
+ * Used for clock aliases that are needed on some OMAPs, but not others
+ */
+struct clk dummy_ck = {
+ .name = "dummy",
+ .ops = &clkops_null,
+};
+
+/*
+ *
+ */
+
+#ifdef CONFIG_OMAP_RESET_CLOCKS
+/*
+ * Disable any unused clocks left on by the bootloader
+ */
+static int __init clk_disable_unused(void)
+{
+ struct clk *ck;
+ unsigned long flags;
+
+ pr_info("clock: disabling unused clocks to save power\n");
+
+ spin_lock_irqsave(&clockfw_lock, flags);
+ list_for_each_entry(ck, &clocks, node) {
+ if (ck->ops == &clkops_null)
+ continue;
+
+ if (ck->usecount > 0 || !ck->enable_reg)
+ continue;
+
+ omap1_clk_disable_unused(ck);
+ }
+ spin_unlock_irqrestore(&clockfw_lock, flags);
+
+ return 0;
+}
+late_initcall(clk_disable_unused);
+late_initcall(omap_clk_enable_autoidle_all);
+#endif
+
+#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
+/*
+ * debugfs support to trace clock tree hierarchy and attributes
+ */
+
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+
+static struct dentry *clk_debugfs_root;
+
+static int clk_dbg_show_summary(struct seq_file *s, void *unused)
+{
+ struct clk *c;
+ struct clk *pa;
+
+ mutex_lock(&clocks_mutex);
+ seq_printf(s, "%-30s %-30s %-10s %s\n",
+ "clock-name", "parent-name", "rate", "use-count");
+
+ list_for_each_entry(c, &clocks, node) {
+ pa = c->parent;
+ seq_printf(s, "%-30s %-30s %-10lu %d\n",
+ c->name, pa ? pa->name : "none", c->rate,
+ c->usecount);
+ }
+ mutex_unlock(&clocks_mutex);
+
+ return 0;
+}
+
+static int clk_dbg_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, clk_dbg_show_summary, inode->i_private);
+}
+
+static const struct file_operations debug_clock_fops = {
+ .open = clk_dbg_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static int clk_debugfs_register_one(struct clk *c)
+{
+ int err;
+ struct dentry *d;
+ struct clk *pa = c->parent;
+
+ d = debugfs_create_dir(c->name, pa ? pa->dent : clk_debugfs_root);
+ if (!d)
+ return -ENOMEM;
+ c->dent = d;
+
+ d = debugfs_create_u8("usecount", S_IRUGO, c->dent, (u8 *)&c->usecount);
+ if (!d) {
+ err = -ENOMEM;
+ goto err_out;
+ }
+ d = debugfs_create_u32("rate", S_IRUGO, c->dent, (u32 *)&c->rate);
+ if (!d) {
+ err = -ENOMEM;
+ goto err_out;
+ }
+ d = debugfs_create_x32("flags", S_IRUGO, c->dent, (u32 *)&c->flags);
+ if (!d) {
+ err = -ENOMEM;
+ goto err_out;
+ }
+ return 0;
+
+err_out:
+ debugfs_remove_recursive(c->dent);
+ return err;
+}
+
+static int clk_debugfs_register(struct clk *c)
+{
+ int err;
+ struct clk *pa = c->parent;
+
+ if (pa && !pa->dent) {
+ err = clk_debugfs_register(pa);
+ if (err)
+ return err;
+ }
+
+ if (!c->dent) {
+ err = clk_debugfs_register_one(c);
+ if (err)
+ return err;
+ }
+ return 0;
+}
+
+static int __init clk_debugfs_init(void)
+{
+ struct clk *c;
+ struct dentry *d;
+ int err;
+
+ d = debugfs_create_dir("clock", NULL);
+ if (!d)
+ return -ENOMEM;
+ clk_debugfs_root = d;
+
+ list_for_each_entry(c, &clocks, node) {
+ err = clk_debugfs_register(c);
+ if (err)
+ goto err_out;
+ }
+
+ d = debugfs_create_file("summary", S_IRUGO,
+ d, NULL, &debug_clock_fops);
+ if (!d)
+ return -ENOMEM;
+
+ return 0;
+err_out:
+ debugfs_remove_recursive(clk_debugfs_root);
+ return err;
+}
+late_initcall(clk_debugfs_init);
+
+#endif /* defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) */
diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h
index 3d04f4f..1e4918a3 100644
--- a/arch/arm/mach-omap1/clock.h
+++ b/arch/arm/mach-omap1/clock.h
@@ -14,8 +14,184 @@
#define __ARCH_ARM_MACH_OMAP1_CLOCK_H
#include <linux/clk.h>
+#include <linux/list.h>
-#include <plat/clock.h>
+#include <linux/clkdev.h>
+
+struct module;
+struct clk;
+
+struct omap_clk {
+ u16 cpu;
+ struct clk_lookup lk;
+};
+
+#define CLK(dev, con, ck, cp) \
+ { \
+ .cpu = cp, \
+ .lk = { \
+ .dev_id = dev, \
+ .con_id = con, \
+ .clk = ck, \
+ }, \
+ }
+
+/* Platform flags for the clkdev-OMAP integration code */
+#define CK_310 (1 << 0)
+#define CK_7XX (1 << 1) /* 7xx, 850 */
+#define CK_1510 (1 << 2)
+#define CK_16XX (1 << 3) /* 16xx, 17xx, 5912 */
+#define CK_1710 (1 << 4) /* 1710 extra for rate selection */
+
+
+/* Temporary, needed during the common clock framework conversion */
+#define __clk_get_name(clk) (clk->name)
+#define __clk_get_parent(clk) (clk->parent)
+#define __clk_get_rate(clk) (clk->rate)
+
+/**
+ * struct clkops - some clock function pointers
+ * @enable: fn ptr that enables the current clock in hardware
+ * @disable: fn ptr that enables the current clock in hardware
+ * @find_idlest: function returning the IDLEST register for the clock's IP blk
+ * @find_companion: function returning the "companion" clk reg for the clock
+ * @allow_idle: fn ptr that enables autoidle for the current clock in hardware
+ * @deny_idle: fn ptr that disables autoidle for the current clock in hardware
+ *
+ * A "companion" clk is an accompanying clock to the one being queried
+ * that must be enabled for the IP module connected to the clock to
+ * become accessible by the hardware. Neither @find_idlest nor
+ * @find_companion should be needed; that information is IP
+ * block-specific; the hwmod code has been created to handle this, but
+ * until hwmod data is ready and drivers have been converted to use PM
+ * runtime calls in place of clk_enable()/clk_disable(), @find_idlest and
+ * @find_companion must, unfortunately, remain.
+ */
+struct clkops {
+ int (*enable)(struct clk *);
+ void (*disable)(struct clk *);
+ void (*find_idlest)(struct clk *, void __iomem **,
+ u8 *, u8 *);
+ void (*find_companion)(struct clk *, void __iomem **,
+ u8 *);
+ void (*allow_idle)(struct clk *);
+ void (*deny_idle)(struct clk *);
+};
+
+/*
+ * struct clk.flags possibilities
+ *
+ * XXX document the rest of the clock flags here
+ *
+ * CLOCK_CLKOUTX2: (OMAP4 only) DPLL CLKOUT and CLKOUTX2 GATE_CTRL
+ * bits share the same register. This flag allows the
+ * omap4_dpllmx*() code to determine which GATE_CTRL bit field
+ * should be used. This is a temporary solution - a better approach
+ * would be to associate clock type-specific data with the clock,
+ * similar to the struct dpll_data approach.
+ */
+#define ENABLE_REG_32BIT (1 << 0) /* Use 32-bit access */
+#define CLOCK_IDLE_CONTROL (1 << 1)
+#define CLOCK_NO_IDLE_PARENT (1 << 2)
+#define ENABLE_ON_INIT (1 << 3) /* Enable upon framework init */
+#define INVERT_ENABLE (1 << 4) /* 0 enables, 1 disables */
+#define CLOCK_CLKOUTX2 (1 << 5)
+
+/**
+ * struct clk - OMAP struct clk
+ * @node: list_head connecting this clock into the full clock list
+ * @ops: struct clkops * for this clock
+ * @name: the name of the clock in the hardware (used in hwmod data and debug)
+ * @parent: pointer to this clock's parent struct clk
+ * @children: list_head connecting to the child clks' @sibling list_heads
+ * @sibling: list_head connecting this clk to its parent clk's @children
+ * @rate: current clock rate
+ * @enable_reg: register to write to enable the clock (see @enable_bit)
+ * @recalc: fn ptr that returns the clock's current rate
+ * @set_rate: fn ptr that can change the clock's current rate
+ * @round_rate: fn ptr that can round the clock's current rate
+ * @init: fn ptr to do clock-specific initialization
+ * @enable_bit: bitshift to write to enable/disable the clock (see @enable_reg)
+ * @usecount: number of users that have requested this clock to be enabled
+ * @fixed_div: when > 0, this clock's rate is its parent's rate / @fixed_div
+ * @flags: see "struct clk.flags possibilities" above
+ * @rate_offset: bitshift for rate selection bitfield (OMAP1 only)
+ * @src_offset: bitshift for source selection bitfield (OMAP1 only)
+ *
+ * XXX @rate_offset, @src_offset should probably be removed and OMAP1
+ * clock code converted to use clksel.
+ *
+ * XXX @usecount is poorly named. It should be "enable_count" or
+ * something similar. "users" in the description refers to kernel
+ * code (core code or drivers) that have called clk_enable() and not
+ * yet called clk_disable(); the usecount of parent clocks is also
+ * incremented by the clock code when clk_enable() is called on child
+ * clocks and decremented by the clock code when clk_disable() is
+ * called on child clocks.
+ *
+ * XXX @clkdm, @usecount, @children, @sibling should be marked for
+ * internal use only.
+ *
+ * @children and @sibling are used to optimize parent-to-child clock
+ * tree traversals. (child-to-parent traversals use @parent.)
+ *
+ * XXX The notion of the clock's current rate probably needs to be
+ * separated from the clock's target rate.
+ */
+struct clk {
+ struct list_head node;
+ const struct clkops *ops;
+ const char *name;
+ struct clk *parent;
+ struct list_head children;
+ struct list_head sibling; /* node for children */
+ unsigned long rate;
+ void __iomem *enable_reg;
+ unsigned long (*recalc)(struct clk *);
+ int (*set_rate)(struct clk *, unsigned long);
+ long (*round_rate)(struct clk *, unsigned long);
+ void (*init)(struct clk *);
+ u8 enable_bit;
+ s8 usecount;
+ u8 fixed_div;
+ u8 flags;
+ u8 rate_offset;
+ u8 src_offset;
+#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
+ struct dentry *dent; /* For visible tree hierarchy */
+#endif
+};
+
+struct clk_functions {
+ int (*clk_enable)(struct clk *clk);
+ void (*clk_disable)(struct clk *clk);
+ long (*clk_round_rate)(struct clk *clk, unsigned long rate);
+ int (*clk_set_rate)(struct clk *clk, unsigned long rate);
+ int (*clk_set_parent)(struct clk *clk, struct clk *parent);
+ void (*clk_allow_idle)(struct clk *clk);
+ void (*clk_deny_idle)(struct clk *clk);
+ void (*clk_disable_unused)(struct clk *clk);
+};
+
+extern int mpurate;
+
+extern int clk_init(struct clk_functions *custom_clocks);
+extern void clk_preinit(struct clk *clk);
+extern int clk_register(struct clk *clk);
+extern void clk_reparent(struct clk *child, struct clk *parent);
+extern void clk_unregister(struct clk *clk);
+extern void propagate_rate(struct clk *clk);
+extern void recalculate_root_clocks(void);
+extern unsigned long followparent_recalc(struct clk *clk);
+extern void clk_enable_init_clocks(void);
+unsigned long omap_fixed_divisor_recalc(struct clk *clk);
+extern struct clk *omap_clk_get_by_name(const char *name);
+extern int omap_clk_enable_autoidle_all(void);
+extern int omap_clk_disable_autoidle_all(void);
+
+extern const struct clkops clkops_null;
+
+extern struct clk dummy_ck;
int omap1_clk_init(void);
void omap1_clk_late_init(void);
diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c
index 9b45f4b..cb7c6ae 100644
--- a/arch/arm/mach-omap1/clock_data.c
+++ b/arch/arm/mach-omap1/clock_data.c
@@ -22,16 +22,14 @@
#include <asm/mach-types.h> /* for machine_is_* */
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/clkdev_omap.h>
-#include <plat/sram.h> /* for omap_sram_reprogram_clock() */
+#include "soc.h"
#include <mach/hardware.h>
#include <mach/usb.h> /* for OTG_BASE */
#include "iomap.h"
#include "clock.h"
+#include "sram.h"
/* Some ARM_IDLECT1 bit shifts - used in struct arm_idlect1_clk */
#define IDL_CLKOUT_ARM_SHIFT 12
@@ -765,14 +763,6 @@
* init
*/
-static struct clk_functions omap1_clk_functions = {
- .clk_enable = omap1_clk_enable,
- .clk_disable = omap1_clk_disable,
- .clk_round_rate = omap1_clk_round_rate,
- .clk_set_rate = omap1_clk_set_rate,
- .clk_disable_unused = omap1_clk_disable_unused,
-};
-
static void __init omap1_show_rates(void)
{
pr_notice("Clocking rate (xtal/DPLL1/MPU): %ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n",
@@ -803,8 +793,6 @@
if (!cpu_is_omap15xx())
omap_writew(0, SOFT_REQ_REG2);
- clk_init(&omap1_clk_functions);
-
/* By default all idlect1 clocks are allowed to idle */
arm_idlect1_mask = ~0;
diff --git a/arch/arm/mach-omap1/common.h b/arch/arm/mach-omap1/common.h
index c2552b2..b53e085 100644
--- a/arch/arm/mach-omap1/common.h
+++ b/arch/arm/mach-omap1/common.h
@@ -26,8 +26,10 @@
#ifndef __ARCH_ARM_MACH_OMAP1_COMMON_H
#define __ARCH_ARM_MACH_OMAP1_COMMON_H
-#include <plat/common.h>
#include <linux/mtd/mtd.h>
+#include <linux/i2c-omap.h>
+
+#include <plat/i2c.h>
#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
void omap7xx_map_io(void);
@@ -38,6 +40,7 @@
#endif
#ifdef CONFIG_ARCH_OMAP15XX
+void omap1510_fpga_init_irq(void);
void omap15xx_map_io(void);
#else
static inline void omap15xx_map_io(void)
@@ -90,4 +93,6 @@
static inline int ocpi_enable(void) { return 0; }
#endif
+extern u32 omap1_get_reset_sources(void);
+
#endif /* __ARCH_ARM_MACH_OMAP1_COMMON_H */
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index d3fec92..0af635205 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -17,12 +17,12 @@
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
+#include <linux/platform_data/omap-wd-timer.h>
+
#include <asm/mach/map.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
#include <mach/mux.h>
-#include <plat/dma.h>
-#include <plat/mmc.h>
#include <mach/omap7xx.h>
#include <mach/camera.h>
@@ -30,6 +30,9 @@
#include "common.h"
#include "clock.h"
+#include "dma.h"
+#include "mmc.h"
+#include "sram.h"
#if defined(CONFIG_SND_SOC) || defined(CONFIG_SND_SOC_MODULE)
@@ -175,6 +178,13 @@
res[3].name = "tx";
res[3].flags = IORESOURCE_DMA;
+ if (cpu_is_omap7xx())
+ data->slots[0].features = MMC_OMAP7XX;
+ if (cpu_is_omap15xx())
+ data->slots[0].features = MMC_OMAP15XX;
+ if (cpu_is_omap16xx())
+ data->slots[0].features = MMC_OMAP16XX;
+
ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res));
if (ret == 0)
ret = platform_device_add_data(pdev, data, sizeof(*data));
@@ -439,18 +449,31 @@
};
static struct platform_device omap_wdt_device = {
- .name = "omap_wdt",
- .id = -1,
+ .name = "omap_wdt",
+ .id = -1,
.num_resources = ARRAY_SIZE(wdt_resources),
.resource = wdt_resources,
};
static int __init omap_init_wdt(void)
{
+ struct omap_wd_timer_platform_data pdata;
+ int ret;
+
if (!cpu_is_omap16xx())
return -ENODEV;
- return platform_device_register(&omap_wdt_device);
+ pdata.read_reset_sources = omap1_get_reset_sources;
+
+ ret = platform_device_register(&omap_wdt_device);
+ if (!ret) {
+ ret = platform_device_add_data(&omap_wdt_device, &pdata,
+ sizeof(pdata));
+ if (ret)
+ platform_device_del(&omap_wdt_device);
+ }
+
+ return ret;
}
subsys_initcall(omap_init_wdt);
#endif
diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c
index 29007fe..978aed8 100644
--- a/arch/arm/mach-omap1/dma.c
+++ b/arch/arm/mach-omap1/dma.c
@@ -25,11 +25,13 @@
#include <linux/device.h>
#include <linux/io.h>
-#include <plat/dma.h>
-#include <plat/tc.h>
+#include <plat-omap/dma-omap.h>
+#include <mach/tc.h>
#include <mach/irqs.h>
+#include "dma.h"
+
#define OMAP1_DMA_BASE (0xfffed800)
#define OMAP1_LOGICAL_DMA_CH_COUNT 17
#define OMAP1_DMA_STRIDE 0x40
@@ -319,6 +321,9 @@
d->dev_caps = ENABLE_1510_MODE;
enable_1510_mode = d->dev_caps & ENABLE_1510_MODE;
+ if (cpu_is_omap16xx())
+ d->dev_caps = ENABLE_16XX_MODE;
+
d->dev_caps |= SRC_PORT;
d->dev_caps |= DST_PORT;
d->dev_caps |= SRC_INDEX;
diff --git a/arch/arm/mach-omap1/dma.h b/arch/arm/mach-omap1/dma.h
new file mode 100644
index 0000000..da6345d
--- /dev/null
+++ b/arch/arm/mach-omap1/dma.h
@@ -0,0 +1,83 @@
+/*
+ * OMAP1 DMA channel definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __OMAP1_DMA_CHANNEL_H
+#define __OMAP1_DMA_CHANNEL_H
+
+/* DMA channels for omap1 */
+#define OMAP_DMA_NO_DEVICE 0
+#define OMAP_DMA_MCSI1_TX 1
+#define OMAP_DMA_MCSI1_RX 2
+#define OMAP_DMA_I2C_RX 3
+#define OMAP_DMA_I2C_TX 4
+#define OMAP_DMA_EXT_NDMA_REQ 5
+#define OMAP_DMA_EXT_NDMA_REQ2 6
+#define OMAP_DMA_UWIRE_TX 7
+#define OMAP_DMA_MCBSP1_TX 8
+#define OMAP_DMA_MCBSP1_RX 9
+#define OMAP_DMA_MCBSP3_TX 10
+#define OMAP_DMA_MCBSP3_RX 11
+#define OMAP_DMA_UART1_TX 12
+#define OMAP_DMA_UART1_RX 13
+#define OMAP_DMA_UART2_TX 14
+#define OMAP_DMA_UART2_RX 15
+#define OMAP_DMA_MCBSP2_TX 16
+#define OMAP_DMA_MCBSP2_RX 17
+#define OMAP_DMA_UART3_TX 18
+#define OMAP_DMA_UART3_RX 19
+#define OMAP_DMA_CAMERA_IF_RX 20
+#define OMAP_DMA_MMC_TX 21
+#define OMAP_DMA_MMC_RX 22
+#define OMAP_DMA_NAND 23
+#define OMAP_DMA_IRQ_LCD_LINE 24
+#define OMAP_DMA_MEMORY_STICK 25
+#define OMAP_DMA_USB_W2FC_RX0 26
+#define OMAP_DMA_USB_W2FC_RX1 27
+#define OMAP_DMA_USB_W2FC_RX2 28
+#define OMAP_DMA_USB_W2FC_TX0 29
+#define OMAP_DMA_USB_W2FC_TX1 30
+#define OMAP_DMA_USB_W2FC_TX2 31
+
+/* These are only for 1610 */
+#define OMAP_DMA_CRYPTO_DES_IN 32
+#define OMAP_DMA_SPI_TX 33
+#define OMAP_DMA_SPI_RX 34
+#define OMAP_DMA_CRYPTO_HASH 35
+#define OMAP_DMA_CCP_ATTN 36
+#define OMAP_DMA_CCP_FIFO_NOT_EMPTY 37
+#define OMAP_DMA_CMT_APE_TX_CHAN_0 38
+#define OMAP_DMA_CMT_APE_RV_CHAN_0 39
+#define OMAP_DMA_CMT_APE_TX_CHAN_1 40
+#define OMAP_DMA_CMT_APE_RV_CHAN_1 41
+#define OMAP_DMA_CMT_APE_TX_CHAN_2 42
+#define OMAP_DMA_CMT_APE_RV_CHAN_2 43
+#define OMAP_DMA_CMT_APE_TX_CHAN_3 44
+#define OMAP_DMA_CMT_APE_RV_CHAN_3 45
+#define OMAP_DMA_CMT_APE_TX_CHAN_4 46
+#define OMAP_DMA_CMT_APE_RV_CHAN_4 47
+#define OMAP_DMA_CMT_APE_TX_CHAN_5 48
+#define OMAP_DMA_CMT_APE_RV_CHAN_5 49
+#define OMAP_DMA_CMT_APE_TX_CHAN_6 50
+#define OMAP_DMA_CMT_APE_RV_CHAN_6 51
+#define OMAP_DMA_CMT_APE_TX_CHAN_7 52
+#define OMAP_DMA_CMT_APE_RV_CHAN_7 53
+#define OMAP_DMA_MMC2_TX 54
+#define OMAP_DMA_MMC2_RX 55
+#define OMAP_DMA_CRYPTO_DES_OUT 56
+
+#endif /* __OMAP1_DMA_CHANNEL_H */
diff --git a/arch/arm/mach-omap1/flash.c b/arch/arm/mach-omap1/flash.c
index 73ae616..b3fb531 100644
--- a/arch/arm/mach-omap1/flash.c
+++ b/arch/arm/mach-omap1/flash.c
@@ -10,7 +10,7 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
#include <mach/flash.h>
#include <mach/hardware.h>
diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c
index 29ec50f..8bd71b2 100644
--- a/arch/arm/mach-omap1/fpga.c
+++ b/arch/arm/mach-omap1/fpga.c
@@ -27,11 +27,11 @@
#include <asm/irq.h>
#include <asm/mach/irq.h>
-#include <plat/fpga.h>
-
#include <mach/hardware.h>
#include "iomap.h"
+#include "common.h"
+#include "fpga.h"
static void fpga_mask_irq(struct irq_data *d)
{
diff --git a/arch/arm/mach-omap1/fpga.h b/arch/arm/mach-omap1/fpga.h
new file mode 100644
index 0000000..4b4307a
--- /dev/null
+++ b/arch/arm/mach-omap1/fpga.h
@@ -0,0 +1,52 @@
+/*
+ * Interrupt handler for OMAP-1510 FPGA
+ *
+ * Copyright (C) 2001 RidgeRun, Inc.
+ * Author: Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * Copyright (C) 2002 MontaVista Software, Inc.
+ *
+ * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6
+ * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_OMAP_FPGA_H
+#define __ASM_ARCH_OMAP_FPGA_H
+
+/*
+ * ---------------------------------------------------------------------------
+ * H2/P2 Debug board FPGA
+ * ---------------------------------------------------------------------------
+ */
+/* maps in the FPGA registers and the ETHR registers */
+#define H2P2_DBG_FPGA_BASE 0xE8000000 /* VA */
+#define H2P2_DBG_FPGA_SIZE SZ_4K /* SIZE */
+#define H2P2_DBG_FPGA_START 0x04000000 /* PA */
+
+#define H2P2_DBG_FPGA_ETHR_START (H2P2_DBG_FPGA_START + 0x300)
+#define H2P2_DBG_FPGA_FPGA_REV IOMEM(H2P2_DBG_FPGA_BASE + 0x10) /* FPGA Revision */
+#define H2P2_DBG_FPGA_BOARD_REV IOMEM(H2P2_DBG_FPGA_BASE + 0x12) /* Board Revision */
+#define H2P2_DBG_FPGA_GPIO IOMEM(H2P2_DBG_FPGA_BASE + 0x14) /* GPIO outputs */
+#define H2P2_DBG_FPGA_LEDS IOMEM(H2P2_DBG_FPGA_BASE + 0x16) /* LEDs outputs */
+#define H2P2_DBG_FPGA_MISC_INPUTS IOMEM(H2P2_DBG_FPGA_BASE + 0x18) /* Misc inputs */
+#define H2P2_DBG_FPGA_LAN_STATUS IOMEM(H2P2_DBG_FPGA_BASE + 0x1A) /* LAN Status line */
+#define H2P2_DBG_FPGA_LAN_RESET IOMEM(H2P2_DBG_FPGA_BASE + 0x1C) /* LAN Reset line */
+
+/* LEDs definition on debug board (16 LEDs, all physically green) */
+#define H2P2_DBG_FPGA_LED_GREEN (1 << 15)
+#define H2P2_DBG_FPGA_LED_AMBER (1 << 14)
+#define H2P2_DBG_FPGA_LED_RED (1 << 13)
+#define H2P2_DBG_FPGA_LED_BLUE (1 << 12)
+/* cpu0 load-meter LEDs */
+#define H2P2_DBG_FPGA_LOAD_METER (1 << 0) // A bit of fun on our board ...
+#define H2P2_DBG_FPGA_LOAD_METER_SIZE 11
+#define H2P2_DBG_FPGA_LOAD_METER_MASK ((1 << H2P2_DBG_FPGA_LOAD_METER_SIZE) - 1)
+
+#define H2P2_DBG_FPGA_P2_LED_TIMER (1 << 0)
+#define H2P2_DBG_FPGA_P2_LED_IDLE (1 << 1)
+
+#endif
diff --git a/arch/arm/mach-omap1/gpio15xx.c b/arch/arm/mach-omap1/gpio15xx.c
index 98e6f39..02b3eb2 100644
--- a/arch/arm/mach-omap1/gpio15xx.c
+++ b/arch/arm/mach-omap1/gpio15xx.c
@@ -19,6 +19,8 @@
#include <linux/gpio.h>
#include <linux/platform_data/gpio-omap.h>
+#include <mach/irqs.h>
+
#define OMAP1_MPUIO_VBASE OMAP1_MPUIO_BASE
#define OMAP1510_GPIO_BASE 0xFFFCE000
diff --git a/arch/arm/mach-omap1/gpio16xx.c b/arch/arm/mach-omap1/gpio16xx.c
index 33f4192..b9952a2 100644
--- a/arch/arm/mach-omap1/gpio16xx.c
+++ b/arch/arm/mach-omap1/gpio16xx.c
@@ -19,6 +19,8 @@
#include <linux/gpio.h>
#include <linux/platform_data/gpio-omap.h>
+#include <mach/irqs.h>
+
#define OMAP1610_GPIO1_BASE 0xfffbe400
#define OMAP1610_GPIO2_BASE 0xfffbec00
#define OMAP1610_GPIO3_BASE 0xfffbb400
diff --git a/arch/arm/mach-omap1/gpio7xx.c b/arch/arm/mach-omap1/gpio7xx.c
index 958ce9a..f5819b2 100644
--- a/arch/arm/mach-omap1/gpio7xx.c
+++ b/arch/arm/mach-omap1/gpio7xx.c
@@ -19,6 +19,8 @@
#include <linux/gpio.h>
#include <linux/platform_data/gpio-omap.h>
+#include <mach/irqs.h>
+
#define OMAP7XX_GPIO1_BASE 0xfffbc000
#define OMAP7XX_GPIO2_BASE 0xfffbc800
#define OMAP7XX_GPIO3_BASE 0xfffbd000
diff --git a/arch/arm/mach-omap1/i2c.c b/arch/arm/mach-omap1/i2c.c
index a0551a6..faca808 100644
--- a/arch/arm/mach-omap1/i2c.c
+++ b/arch/arm/mach-omap1/i2c.c
@@ -19,11 +19,25 @@
*
*/
-#include <plat/i2c.h>
+#include <linux/i2c-omap.h>
#include <mach/mux.h>
-#include <plat/cpu.h>
+#include "soc.h"
-void __init omap1_i2c_mux_pins(int bus_id)
+#include <plat/i2c.h>
+
+#define OMAP_I2C_SIZE 0x3f
+#define OMAP1_I2C_BASE 0xfffb3800
+#define OMAP1_INT_I2C (32 + 4)
+
+static const char name[] = "omap_i2c";
+
+static struct resource i2c_resources[2] = {
+};
+
+static struct platform_device omap_i2c_devices[1] = {
+};
+
+static void __init omap1_i2c_mux_pins(int bus_id)
{
if (cpu_is_omap7xx()) {
omap_cfg_reg(I2C_7XX_SDA);
@@ -33,3 +47,47 @@
omap_cfg_reg(I2C_SCL);
}
}
+
+int __init omap_i2c_add_bus(struct omap_i2c_bus_platform_data *pdata,
+ int bus_id)
+{
+ struct platform_device *pdev;
+ struct resource *res;
+
+ if (bus_id > 1)
+ return -EINVAL;
+
+ omap1_i2c_mux_pins(bus_id);
+
+ pdev = &omap_i2c_devices[bus_id - 1];
+ pdev->id = bus_id;
+ pdev->name = name;
+ pdev->num_resources = ARRAY_SIZE(i2c_resources);
+ res = i2c_resources;
+ res[0].start = OMAP1_I2C_BASE;
+ res[0].end = res[0].start + OMAP_I2C_SIZE;
+ res[0].flags = IORESOURCE_MEM;
+ res[1].start = OMAP1_INT_I2C;
+ res[1].flags = IORESOURCE_IRQ;
+ pdev->resource = res;
+
+ /* all OMAP1 have IP version 1 register set */
+ pdata->rev = OMAP_I2C_IP_VERSION_1;
+
+ /* all OMAP1 I2C are implemented like this */
+ pdata->flags = OMAP_I2C_FLAG_NO_FIFO |
+ OMAP_I2C_FLAG_SIMPLE_CLOCK |
+ OMAP_I2C_FLAG_16BIT_DATA_REG |
+ OMAP_I2C_FLAG_ALWAYS_ARMXOR_CLK;
+
+ /* how the cpu bus is wired up differs for 7xx only */
+
+ if (cpu_is_omap7xx())
+ pdata->flags |= OMAP_I2C_FLAG_BUS_SHIFT_1;
+ else
+ pdata->flags |= OMAP_I2C_FLAG_BUS_SHIFT_2;
+
+ pdev->dev.platform_data = pdata;
+
+ return platform_device_register(pdev);
+}
diff --git a/arch/arm/mach-omap1/id.c b/arch/arm/mach-omap1/id.c
index a1b846a..52de382 100644
--- a/arch/arm/mach-omap1/id.c
+++ b/arch/arm/mach-omap1/id.c
@@ -17,7 +17,7 @@
#include <linux/io.h>
#include <asm/system_info.h>
-#include <plat/cpu.h>
+#include "soc.h"
#include <mach/hardware.h>
diff --git a/arch/arm/mach-omap1/include/mach/debug-macro.S b/arch/arm/mach-omap1/include/mach/debug-macro.S
index 2b36a28..5c1a26c 100644
--- a/arch/arm/mach-omap1/include/mach/debug-macro.S
+++ b/arch/arm/mach-omap1/include/mach/debug-macro.S
@@ -13,7 +13,7 @@
#include <linux/serial_reg.h>
-#include <plat/serial.h>
+#include "serial.h"
.pushsection .data
omap_uart_phys: .word 0x0
diff --git a/arch/arm/mach-omap1/include/mach/entry-macro.S b/arch/arm/mach-omap1/include/mach/entry-macro.S
index 88f08ca..78a8c6c 100644
--- a/arch/arm/mach-omap1/include/mach/entry-macro.S
+++ b/arch/arm/mach-omap1/include/mach/entry-macro.S
@@ -13,8 +13,6 @@
#include <mach/hardware.h>
#include <mach/irqs.h>
-#include "../../iomap.h"
-
.macro get_irqnr_preamble, base, tmp
.endm
diff --git a/arch/arm/mach-omap1/include/mach/gpio.h b/arch/arm/mach-omap1/include/mach/gpio.h
deleted file mode 100644
index ebf86c0..0000000
--- a/arch/arm/mach-omap1/include/mach/gpio.h
+++ /dev/null
@@ -1,3 +0,0 @@
-/*
- * arch/arm/mach-omap1/include/mach/gpio.h
- */
diff --git a/arch/arm/mach-omap1/include/mach/hardware.h b/arch/arm/mach-omap1/include/mach/hardware.h
index 84248d2..5875a50 100644
--- a/arch/arm/mach-omap1/include/mach/hardware.h
+++ b/arch/arm/mach-omap1/include/mach/hardware.h
@@ -39,7 +39,7 @@
#include <asm/sizes.h>
#ifndef __ASSEMBLER__
#include <asm/types.h>
-#include <plat/cpu.h>
+#include <mach/soc.h>
/*
* NOTE: Please use ioremap + __raw_read/write where possible instead of these
@@ -51,7 +51,7 @@
extern void omap_writew(u16 v, u32 pa);
extern void omap_writel(u32 v, u32 pa);
-#include <plat/tc.h>
+#include <mach/tc.h>
/* Almost all documentation for chip and board memory maps assumes
* BM is clear. Most devel boards have a switch to control booting
@@ -72,7 +72,10 @@
#endif /* ifndef __ASSEMBLER__ */
-#include <plat/serial.h>
+#define OMAP1_IO_OFFSET 0x01000000 /* Virtual IO = 0xfefb0000 */
+#define OMAP1_IO_ADDRESS(pa) IOMEM((pa) - OMAP1_IO_OFFSET)
+
+#include <mach/serial.h>
/*
* ---------------------------------------------------------------------------
diff --git a/arch/arm/mach-omap1/include/mach/memory.h b/arch/arm/mach-omap1/include/mach/memory.h
index 901082d..3c25305 100644
--- a/arch/arm/mach-omap1/include/mach/memory.h
+++ b/arch/arm/mach-omap1/include/mach/memory.h
@@ -19,7 +19,7 @@
* because of the strncmp().
*/
#if defined(CONFIG_ARCH_OMAP15XX) && !defined(__ASSEMBLER__)
-#include <plat/cpu.h>
+#include <mach/soc.h>
/*
* OMAP-1510 Local Bus address offset
diff --git a/arch/arm/mach-omap1/include/mach/omap1510.h b/arch/arm/mach-omap1/include/mach/omap1510.h
index 8fe05d6..3d23524 100644
--- a/arch/arm/mach-omap1/include/mach/omap1510.h
+++ b/arch/arm/mach-omap1/include/mach/omap1510.h
@@ -45,5 +45,118 @@
#define OMAP1510_DSP_MMU_BASE (0xfffed200)
+/*
+ * ---------------------------------------------------------------------------
+ * OMAP-1510 FPGA
+ * ---------------------------------------------------------------------------
+ */
+#define OMAP1510_FPGA_BASE 0xE8000000 /* VA */
+#define OMAP1510_FPGA_SIZE SZ_4K
+#define OMAP1510_FPGA_START 0x08000000 /* PA */
+
+/* Revision */
+#define OMAP1510_FPGA_REV_LOW IOMEM(OMAP1510_FPGA_BASE + 0x0)
+#define OMAP1510_FPGA_REV_HIGH IOMEM(OMAP1510_FPGA_BASE + 0x1)
+#define OMAP1510_FPGA_LCD_PANEL_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x2)
+#define OMAP1510_FPGA_LED_DIGIT IOMEM(OMAP1510_FPGA_BASE + 0x3)
+#define INNOVATOR_FPGA_HID_SPI IOMEM(OMAP1510_FPGA_BASE + 0x4)
+#define OMAP1510_FPGA_POWER IOMEM(OMAP1510_FPGA_BASE + 0x5)
+
+/* Interrupt status */
+#define OMAP1510_FPGA_ISR_LO IOMEM(OMAP1510_FPGA_BASE + 0x6)
+#define OMAP1510_FPGA_ISR_HI IOMEM(OMAP1510_FPGA_BASE + 0x7)
+
+/* Interrupt mask */
+#define OMAP1510_FPGA_IMR_LO IOMEM(OMAP1510_FPGA_BASE + 0x8)
+#define OMAP1510_FPGA_IMR_HI IOMEM(OMAP1510_FPGA_BASE + 0x9)
+
+/* Reset registers */
+#define OMAP1510_FPGA_HOST_RESET IOMEM(OMAP1510_FPGA_BASE + 0xa)
+#define OMAP1510_FPGA_RST IOMEM(OMAP1510_FPGA_BASE + 0xb)
+
+#define OMAP1510_FPGA_AUDIO IOMEM(OMAP1510_FPGA_BASE + 0xc)
+#define OMAP1510_FPGA_DIP IOMEM(OMAP1510_FPGA_BASE + 0xe)
+#define OMAP1510_FPGA_FPGA_IO IOMEM(OMAP1510_FPGA_BASE + 0xf)
+#define OMAP1510_FPGA_UART1 IOMEM(OMAP1510_FPGA_BASE + 0x14)
+#define OMAP1510_FPGA_UART2 IOMEM(OMAP1510_FPGA_BASE + 0x15)
+#define OMAP1510_FPGA_OMAP1510_STATUS IOMEM(OMAP1510_FPGA_BASE + 0x16)
+#define OMAP1510_FPGA_BOARD_REV IOMEM(OMAP1510_FPGA_BASE + 0x18)
+#define INNOVATOR_FPGA_CAM_USB_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x20c)
+#define OMAP1510P1_PPT_DATA IOMEM(OMAP1510_FPGA_BASE + 0x100)
+#define OMAP1510P1_PPT_STATUS IOMEM(OMAP1510_FPGA_BASE + 0x101)
+#define OMAP1510P1_PPT_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x102)
+
+#define OMAP1510_FPGA_TOUCHSCREEN IOMEM(OMAP1510_FPGA_BASE + 0x204)
+
+#define INNOVATOR_FPGA_INFO IOMEM(OMAP1510_FPGA_BASE + 0x205)
+#define INNOVATOR_FPGA_LCD_BRIGHT_LO IOMEM(OMAP1510_FPGA_BASE + 0x206)
+#define INNOVATOR_FPGA_LCD_BRIGHT_HI IOMEM(OMAP1510_FPGA_BASE + 0x207)
+#define INNOVATOR_FPGA_LED_GRN_LO IOMEM(OMAP1510_FPGA_BASE + 0x208)
+#define INNOVATOR_FPGA_LED_GRN_HI IOMEM(OMAP1510_FPGA_BASE + 0x209)
+#define INNOVATOR_FPGA_LED_RED_LO IOMEM(OMAP1510_FPGA_BASE + 0x20a)
+#define INNOVATOR_FPGA_LED_RED_HI IOMEM(OMAP1510_FPGA_BASE + 0x20b)
+#define INNOVATOR_FPGA_EXP_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x20d)
+#define INNOVATOR_FPGA_ISR2 IOMEM(OMAP1510_FPGA_BASE + 0x20e)
+#define INNOVATOR_FPGA_IMR2 IOMEM(OMAP1510_FPGA_BASE + 0x210)
+
+#define OMAP1510_FPGA_ETHR_START (OMAP1510_FPGA_START + 0x300)
+
+/*
+ * Power up Giga UART driver, turn on HID clock.
+ * Turn off BT power, since we're not using it and it
+ * draws power.
+ */
+#define OMAP1510_FPGA_RESET_VALUE 0x42
+
+#define OMAP1510_FPGA_PCR_IF_PD0 (1 << 7)
+#define OMAP1510_FPGA_PCR_COM2_EN (1 << 6)
+#define OMAP1510_FPGA_PCR_COM1_EN (1 << 5)
+#define OMAP1510_FPGA_PCR_EXP_PD0 (1 << 4)
+#define OMAP1510_FPGA_PCR_EXP_PD1 (1 << 3)
+#define OMAP1510_FPGA_PCR_48MHZ_CLK (1 << 2)
+#define OMAP1510_FPGA_PCR_4MHZ_CLK (1 << 1)
+#define OMAP1510_FPGA_PCR_RSRVD_BIT0 (1 << 0)
+
+/*
+ * Innovator/OMAP1510 FPGA HID register bit definitions
+ */
+#define OMAP1510_FPGA_HID_SCLK (1<<0) /* output */
+#define OMAP1510_FPGA_HID_MOSI (1<<1) /* output */
+#define OMAP1510_FPGA_HID_nSS (1<<2) /* output 0/1 chip idle/select */
+#define OMAP1510_FPGA_HID_nHSUS (1<<3) /* output 0/1 host active/suspended */
+#define OMAP1510_FPGA_HID_MISO (1<<4) /* input */
+#define OMAP1510_FPGA_HID_ATN (1<<5) /* input 0/1 chip idle/ATN */
+#define OMAP1510_FPGA_HID_rsrvd (1<<6)
+#define OMAP1510_FPGA_HID_RESETn (1<<7) /* output - 0/1 USAR reset/run */
+
+/* The FPGA IRQ is cascaded through GPIO_13 */
+#define OMAP1510_INT_FPGA (IH_GPIO_BASE + 13)
+
+/* IRQ Numbers for interrupts muxed through the FPGA */
+#define OMAP1510_INT_FPGA_ATN (OMAP_FPGA_IRQ_BASE + 0)
+#define OMAP1510_INT_FPGA_ACK (OMAP_FPGA_IRQ_BASE + 1)
+#define OMAP1510_INT_FPGA2 (OMAP_FPGA_IRQ_BASE + 2)
+#define OMAP1510_INT_FPGA3 (OMAP_FPGA_IRQ_BASE + 3)
+#define OMAP1510_INT_FPGA4 (OMAP_FPGA_IRQ_BASE + 4)
+#define OMAP1510_INT_FPGA5 (OMAP_FPGA_IRQ_BASE + 5)
+#define OMAP1510_INT_FPGA6 (OMAP_FPGA_IRQ_BASE + 6)
+#define OMAP1510_INT_FPGA7 (OMAP_FPGA_IRQ_BASE + 7)
+#define OMAP1510_INT_FPGA8 (OMAP_FPGA_IRQ_BASE + 8)
+#define OMAP1510_INT_FPGA9 (OMAP_FPGA_IRQ_BASE + 9)
+#define OMAP1510_INT_FPGA10 (OMAP_FPGA_IRQ_BASE + 10)
+#define OMAP1510_INT_FPGA11 (OMAP_FPGA_IRQ_BASE + 11)
+#define OMAP1510_INT_FPGA12 (OMAP_FPGA_IRQ_BASE + 12)
+#define OMAP1510_INT_ETHER (OMAP_FPGA_IRQ_BASE + 13)
+#define OMAP1510_INT_FPGAUART1 (OMAP_FPGA_IRQ_BASE + 14)
+#define OMAP1510_INT_FPGAUART2 (OMAP_FPGA_IRQ_BASE + 15)
+#define OMAP1510_INT_FPGA_TS (OMAP_FPGA_IRQ_BASE + 16)
+#define OMAP1510_INT_FPGA17 (OMAP_FPGA_IRQ_BASE + 17)
+#define OMAP1510_INT_FPGA_CAM (OMAP_FPGA_IRQ_BASE + 18)
+#define OMAP1510_INT_FPGA_RTC_A (OMAP_FPGA_IRQ_BASE + 19)
+#define OMAP1510_INT_FPGA_RTC_B (OMAP_FPGA_IRQ_BASE + 20)
+#define OMAP1510_INT_FPGA_CD (OMAP_FPGA_IRQ_BASE + 21)
+#define OMAP1510_INT_FPGA22 (OMAP_FPGA_IRQ_BASE + 22)
+#define OMAP1510_INT_FPGA23 (OMAP_FPGA_IRQ_BASE + 23)
+
#endif /* __ASM_ARCH_OMAP15XX_H */
diff --git a/arch/arm/mach-omap1/include/mach/serial.h b/arch/arm/mach-omap1/include/mach/serial.h
new file mode 100644
index 0000000..2ce6a2db
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/serial.h
@@ -0,0 +1,53 @@
+/*
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support- Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_SERIAL_H
+#define __ASM_ARCH_SERIAL_H
+
+#include <linux/init.h>
+
+/*
+ * Memory entry used for the DEBUG_LL UART configuration, relative to
+ * start of RAM. See also uncompress.h and debug-macro.S.
+ *
+ * Note that using a memory location for storing the UART configuration
+ * has at least two limitations:
+ *
+ * 1. Kernel uncompress code cannot overlap OMAP_UART_INFO as the
+ * uncompress code could then partially overwrite itself
+ * 2. We assume printascii is called at least once before paging_init,
+ * and addruart has a chance to read OMAP_UART_INFO
+ */
+#define OMAP_UART_INFO_OFS 0x3ffc
+
+/* OMAP1 serial ports */
+#define OMAP1_UART1_BASE 0xfffb0000
+#define OMAP1_UART2_BASE 0xfffb0800
+#define OMAP1_UART3_BASE 0xfffb9800
+
+#define OMAP_PORT_SHIFT 2
+#define OMAP7XX_PORT_SHIFT 0
+
+#define OMAP1510_BASE_BAUD (12000000/16)
+#define OMAP16XX_BASE_BAUD (48000000/16)
+
+/*
+ * DEBUG_LL port encoding stored into the UART1 scratchpad register by
+ * decomp_setup in uncompress.h
+ */
+#define OMAP1UART1 11
+#define OMAP1UART2 12
+#define OMAP1UART3 13
+
+#ifndef __ASSEMBLER__
+extern void omap_serial_init(void);
+#endif
+
+#endif
diff --git a/arch/arm/mach-omap1/include/mach/soc.h b/arch/arm/mach-omap1/include/mach/soc.h
new file mode 100644
index 0000000..6cf9c1c
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/soc.h
@@ -0,0 +1,229 @@
+/*
+ * OMAP cpu type detection
+ *
+ * Copyright (C) 2004, 2008 Nokia Corporation
+ *
+ * Copyright (C) 2009-11 Texas Instruments.
+ *
+ * Written by Tony Lindgren <tony.lindgren@nokia.com>
+ *
+ * Added OMAP4/5 specific defines - Santosh Shilimkar<santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __ASM_ARCH_OMAP_CPU_H
+#define __ASM_ARCH_OMAP_CPU_H
+
+#ifndef __ASSEMBLY__
+
+#include <linux/bitops.h>
+
+/*
+ * Test if multicore OMAP support is needed
+ */
+#undef MULTI_OMAP1
+#undef OMAP_NAME
+
+#ifdef CONFIG_ARCH_OMAP730
+# ifdef OMAP_NAME
+# undef MULTI_OMAP1
+# define MULTI_OMAP1
+# else
+# define OMAP_NAME omap730
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP850
+# ifdef OMAP_NAME
+# undef MULTI_OMAP1
+# define MULTI_OMAP1
+# else
+# define OMAP_NAME omap850
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
+# ifdef OMAP_NAME
+# undef MULTI_OMAP1
+# define MULTI_OMAP1
+# else
+# define OMAP_NAME omap1510
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
+# ifdef OMAP_NAME
+# undef MULTI_OMAP1
+# define MULTI_OMAP1
+# else
+# define OMAP_NAME omap16xx
+# endif
+#endif
+
+/*
+ * omap_rev bits:
+ * CPU id bits (0730, 1510, 1710, 2422...) [31:16]
+ * CPU revision (See _REV_ defined in cpu.h) [15:08]
+ * CPU class bits (15xx, 16xx, 24xx, 34xx...) [07:00]
+ */
+unsigned int omap_rev(void);
+
+/*
+ * Get the CPU revision for OMAP devices
+ */
+#define GET_OMAP_REVISION() ((omap_rev() >> 8) & 0xff)
+
+/*
+ * Macros to group OMAP into cpu classes.
+ * These can be used in most places.
+ * cpu_is_omap7xx(): True for OMAP730, OMAP850
+ * cpu_is_omap15xx(): True for OMAP1510, OMAP5910 and OMAP310
+ * cpu_is_omap16xx(): True for OMAP1610, OMAP5912 and OMAP1710
+ */
+#define GET_OMAP_CLASS (omap_rev() & 0xff)
+
+#define IS_OMAP_CLASS(class, id) \
+static inline int is_omap ##class (void) \
+{ \
+ return (GET_OMAP_CLASS == (id)) ? 1 : 0; \
+}
+
+#define GET_OMAP_SUBCLASS ((omap_rev() >> 20) & 0x0fff)
+
+#define IS_OMAP_SUBCLASS(subclass, id) \
+static inline int is_omap ##subclass (void) \
+{ \
+ return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \
+}
+
+IS_OMAP_CLASS(7xx, 0x07)
+IS_OMAP_CLASS(15xx, 0x15)
+IS_OMAP_CLASS(16xx, 0x16)
+
+#define cpu_is_omap7xx() 0
+#define cpu_is_omap15xx() 0
+#define cpu_is_omap16xx() 0
+
+#if defined(MULTI_OMAP1)
+# if defined(CONFIG_ARCH_OMAP730)
+# undef cpu_is_omap7xx
+# define cpu_is_omap7xx() is_omap7xx()
+# endif
+# if defined(CONFIG_ARCH_OMAP850)
+# undef cpu_is_omap7xx
+# define cpu_is_omap7xx() is_omap7xx()
+# endif
+# if defined(CONFIG_ARCH_OMAP15XX)
+# undef cpu_is_omap15xx
+# define cpu_is_omap15xx() is_omap15xx()
+# endif
+# if defined(CONFIG_ARCH_OMAP16XX)
+# undef cpu_is_omap16xx
+# define cpu_is_omap16xx() is_omap16xx()
+# endif
+#else
+# if defined(CONFIG_ARCH_OMAP730)
+# undef cpu_is_omap7xx
+# define cpu_is_omap7xx() 1
+# endif
+# if defined(CONFIG_ARCH_OMAP850)
+# undef cpu_is_omap7xx
+# define cpu_is_omap7xx() 1
+# endif
+# if defined(CONFIG_ARCH_OMAP15XX)
+# undef cpu_is_omap15xx
+# define cpu_is_omap15xx() 1
+# endif
+# if defined(CONFIG_ARCH_OMAP16XX)
+# undef cpu_is_omap16xx
+# define cpu_is_omap16xx() 1
+# endif
+#endif
+
+/*
+ * Macros to detect individual cpu types.
+ * These are only rarely needed.
+ * cpu_is_omap310(): True for OMAP310
+ * cpu_is_omap1510(): True for OMAP1510
+ * cpu_is_omap1610(): True for OMAP1610
+ * cpu_is_omap1611(): True for OMAP1611
+ * cpu_is_omap5912(): True for OMAP5912
+ * cpu_is_omap1621(): True for OMAP1621
+ * cpu_is_omap1710(): True for OMAP1710
+ */
+#define GET_OMAP_TYPE ((omap_rev() >> 16) & 0xffff)
+
+#define IS_OMAP_TYPE(type, id) \
+static inline int is_omap ##type (void) \
+{ \
+ return (GET_OMAP_TYPE == (id)) ? 1 : 0; \
+}
+
+IS_OMAP_TYPE(310, 0x0310)
+IS_OMAP_TYPE(1510, 0x1510)
+IS_OMAP_TYPE(1610, 0x1610)
+IS_OMAP_TYPE(1611, 0x1611)
+IS_OMAP_TYPE(5912, 0x1611)
+IS_OMAP_TYPE(1621, 0x1621)
+IS_OMAP_TYPE(1710, 0x1710)
+
+#define cpu_is_omap310() 0
+#define cpu_is_omap1510() 0
+#define cpu_is_omap1610() 0
+#define cpu_is_omap5912() 0
+#define cpu_is_omap1611() 0
+#define cpu_is_omap1621() 0
+#define cpu_is_omap1710() 0
+
+/* These are needed to compile common code */
+#ifdef CONFIG_ARCH_OMAP1
+#define cpu_is_omap242x() 0
+#define cpu_is_omap2430() 0
+#define cpu_is_omap243x() 0
+#define cpu_is_omap24xx() 0
+#define cpu_is_omap34xx() 0
+#define cpu_is_omap44xx() 0
+#define soc_is_omap54xx() 0
+#define soc_is_am33xx() 0
+#define cpu_class_is_omap1() 1
+#define cpu_class_is_omap2() 0
+#endif
+
+/*
+ * Whether we have MULTI_OMAP1 or not, we still need to distinguish
+ * between 310 vs. 1510 and 1611B/5912 vs. 1710.
+ */
+
+#if defined(CONFIG_ARCH_OMAP15XX)
+# undef cpu_is_omap310
+# undef cpu_is_omap1510
+# define cpu_is_omap310() is_omap310()
+# define cpu_is_omap1510() is_omap1510()
+#endif
+
+#if defined(CONFIG_ARCH_OMAP16XX)
+# undef cpu_is_omap1610
+# undef cpu_is_omap1611
+# undef cpu_is_omap5912
+# undef cpu_is_omap1621
+# undef cpu_is_omap1710
+# define cpu_is_omap1610() is_omap1610()
+# define cpu_is_omap1611() is_omap1611()
+# define cpu_is_omap5912() is_omap5912()
+# define cpu_is_omap1621() is_omap1621()
+# define cpu_is_omap1710() is_omap1710()
+#endif
+
+#endif /* __ASSEMBLY__ */
+#endif
diff --git a/arch/arm/plat-omap/include/plat/tc.h b/arch/arm/mach-omap1/include/mach/tc.h
similarity index 100%
rename from arch/arm/plat-omap/include/plat/tc.h
rename to arch/arm/mach-omap1/include/mach/tc.h
diff --git a/arch/arm/mach-omap1/include/mach/uncompress.h b/arch/arm/mach-omap1/include/mach/uncompress.h
index 0ff22dc..ad6fbe7 100644
--- a/arch/arm/mach-omap1/include/mach/uncompress.h
+++ b/arch/arm/mach-omap1/include/mach/uncompress.h
@@ -1,5 +1,122 @@
/*
- * arch/arm/mach-omap1/include/mach/uncompress.h
+ * arch/arm/plat-omap/include/mach/uncompress.h
+ *
+ * Serial port stubs for kernel decompress status messages
+ *
+ * Initially based on:
+ * linux-2.4.15-rmk1-dsplinux1.6/arch/arm/plat-omap/include/mach1510/uncompress.h
+ * Copyright (C) 2000 RidgeRun, Inc.
+ * Author: Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * Rewritten by:
+ * Author: <source@mvista.com>
+ * 2004 (c) MontaVista Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
*/
-#include <plat/uncompress.h>
+#include <linux/types.h>
+#include <linux/serial_reg.h>
+
+#include <asm/memory.h>
+#include <asm/mach-types.h>
+
+#include "serial.h"
+
+#define MDR1_MODE_MASK 0x07
+
+volatile u8 *uart_base;
+int uart_shift;
+
+/*
+ * Store the DEBUG_LL uart number into memory.
+ * See also debug-macro.S, and serial.c for related code.
+ */
+static void set_omap_uart_info(unsigned char port)
+{
+ /*
+ * Get address of some.bss variable and round it down
+ * a la CONFIG_AUTO_ZRELADDR.
+ */
+ u32 ram_start = (u32)&uart_shift & 0xf8000000;
+ u32 *uart_info = (u32 *)(ram_start + OMAP_UART_INFO_OFS);
+ *uart_info = port;
+}
+
+static void putc(int c)
+{
+ if (!uart_base)
+ return;
+
+ /* Check for UART 16x mode */
+ if ((uart_base[UART_OMAP_MDR1 << uart_shift] & MDR1_MODE_MASK) != 0)
+ return;
+
+ while (!(uart_base[UART_LSR << uart_shift] & UART_LSR_THRE))
+ barrier();
+ uart_base[UART_TX << uart_shift] = c;
+}
+
+static inline void flush(void)
+{
+}
+
+/*
+ * Macros to configure UART1 and debug UART
+ */
+#define _DEBUG_LL_ENTRY(mach, dbg_uart, dbg_shft, dbg_id) \
+ if (machine_is_##mach()) { \
+ uart_base = (volatile u8 *)(dbg_uart); \
+ uart_shift = (dbg_shft); \
+ port = (dbg_id); \
+ set_omap_uart_info(port); \
+ break; \
+ }
+
+#define DEBUG_LL_OMAP7XX(p, mach) \
+ _DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP7XX_PORT_SHIFT, \
+ OMAP1UART##p)
+
+#define DEBUG_LL_OMAP1(p, mach) \
+ _DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP_PORT_SHIFT, \
+ OMAP1UART##p)
+
+static inline void arch_decomp_setup(void)
+{
+ int port = 0;
+
+ /*
+ * Initialize the port based on the machine ID from the bootloader.
+ * Note that we're using macros here instead of switch statement
+ * as machine_is functions are optimized out for the boards that
+ * are not selected.
+ */
+ do {
+ /* omap7xx/8xx based boards using UART1 with shift 0 */
+ DEBUG_LL_OMAP7XX(1, herald);
+ DEBUG_LL_OMAP7XX(1, omap_perseus2);
+
+ /* omap15xx/16xx based boards using UART1 */
+ DEBUG_LL_OMAP1(1, ams_delta);
+ DEBUG_LL_OMAP1(1, nokia770);
+ DEBUG_LL_OMAP1(1, omap_h2);
+ DEBUG_LL_OMAP1(1, omap_h3);
+ DEBUG_LL_OMAP1(1, omap_innovator);
+ DEBUG_LL_OMAP1(1, omap_osk);
+ DEBUG_LL_OMAP1(1, omap_palmte);
+ DEBUG_LL_OMAP1(1, omap_palmz71);
+
+ /* omap15xx/16xx based boards using UART2 */
+ DEBUG_LL_OMAP1(2, omap_palmtt);
+
+ /* omap15xx/16xx based boards using UART3 */
+ DEBUG_LL_OMAP1(3, sx1);
+ } while (0);
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c
index 6a5baab..5a3b806 100644
--- a/arch/arm/mach-omap1/io.c
+++ b/arch/arm/mach-omap1/io.c
@@ -17,8 +17,8 @@
#include <asm/mach/map.h>
#include <mach/mux.h>
-#include <plat/tc.h>
-#include <plat/dma.h>
+#include <mach/tc.h>
+#include <plat-omap/dma-omap.h>
#include "iomap.h"
#include "common.h"
@@ -134,7 +134,6 @@
*/
omap1_clk_init();
omap1_mux_init();
- omap_init_consistent_dma_size();
}
void __init omap1_init_late(void)
diff --git a/arch/arm/mach-omap1/iomap.h b/arch/arm/mach-omap1/iomap.h
index 330c471..f4e2d7a 100644
--- a/arch/arm/mach-omap1/iomap.h
+++ b/arch/arm/mach-omap1/iomap.h
@@ -22,9 +22,6 @@
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#define OMAP1_IO_OFFSET 0x01000000 /* Virtual IO = 0xfefb0000 */
-#define OMAP1_IO_ADDRESS(pa) IOMEM((pa) - OMAP1_IO_OFFSET)
-
/*
* ----------------------------------------------------------------------------
* Omap1 specific IO mapping
diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c
index 6995fb6..122ef67 100644
--- a/arch/arm/mach-omap1/irq.c
+++ b/arch/arm/mach-omap1/irq.c
@@ -45,7 +45,7 @@
#include <asm/irq.h>
#include <asm/mach/irq.h>
-#include <plat/cpu.h>
+#include "soc.h"
#include <mach/hardware.h>
diff --git a/arch/arm/mach-omap1/lcd_dma.c b/arch/arm/mach-omap1/lcd_dma.c
index ed42628..7ed8c18 100644
--- a/arch/arm/mach-omap1/lcd_dma.c
+++ b/arch/arm/mach-omap1/lcd_dma.c
@@ -27,11 +27,13 @@
#include <linux/interrupt.h>
#include <linux/io.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
#include <mach/hardware.h>
#include <mach/lcdc.h>
+#include "dma.h"
+
int omap_lcd_dma_running(void)
{
/*
diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c
index bdc2e75..c6d8fdf 100644
--- a/arch/arm/mach-omap1/mcbsp.c
+++ b/arch/arm/mach-omap1/mcbsp.c
@@ -19,14 +19,15 @@
#include <linux/platform_device.h>
#include <linux/slab.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
#include <mach/mux.h>
-#include <plat/cpu.h>
+#include "soc.h"
#include <linux/platform_data/asoc-ti-mcbsp.h>
#include <mach/irqs.h>
#include "iomap.h"
+#include "dma.h"
#define DPS_RSTCT2_PER_EN (1 << 0)
#define DSP_RSTCT2_WD_PER_EN (1 << 1)
diff --git a/arch/arm/mach-omap1/mmc.h b/arch/arm/mach-omap1/mmc.h
new file mode 100644
index 0000000..39c2b13
--- /dev/null
+++ b/arch/arm/mach-omap1/mmc.h
@@ -0,0 +1,18 @@
+#include <linux/mmc/host.h>
+#include <linux/platform_data/mmc-omap.h>
+
+#define OMAP15XX_NR_MMC 1
+#define OMAP16XX_NR_MMC 2
+#define OMAP1_MMC_SIZE 0x080
+#define OMAP1_MMC1_BASE 0xfffb7800
+#define OMAP1_MMC2_BASE 0xfffb7c00 /* omap16xx only */
+
+#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
+ int nr_controllers);
+#else
+static inline void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
+ int nr_controllers)
+{
+}
+#endif
diff --git a/arch/arm/mach-omap1/opp_data.c b/arch/arm/mach-omap1/opp_data.c
index 9cd4ddb..8dcebe6 100644
--- a/arch/arm/mach-omap1/opp_data.c
+++ b/arch/arm/mach-omap1/opp_data.c
@@ -10,7 +10,7 @@
* published by the Free Software Foundation.
*/
-#include <plat/clkdev_omap.h>
+#include "clock.h"
#include "opp.h"
/*-------------------------------------------------------------------------
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index 47ec161..66d663a 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -44,23 +44,23 @@
#include <linux/io.h>
#include <linux/atomic.h>
+#include <asm/fncpy.h>
#include <asm/system_misc.h>
#include <asm/irq.h>
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
-#include <plat/cpu.h>
-#include <plat/clock.h>
-#include <plat/sram.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
#include <mach/mux.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
#include <plat/dmtimer.h>
#include <mach/irqs.h>
#include "iomap.h"
+#include "clock.h"
#include "pm.h"
+#include "sram.h"
static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE];
static unsigned short dsp_sleep_save[DSP_SLEEP_SAVE_SIZE];
diff --git a/arch/arm/mach-omap1/pm_bus.c b/arch/arm/mach-omap1/pm_bus.c
index 7868e75..3f2d396 100644
--- a/arch/arm/mach-omap1/pm_bus.c
+++ b/arch/arm/mach-omap1/pm_bus.c
@@ -19,8 +19,7 @@
#include <linux/clk.h>
#include <linux/err.h>
-#include <plat/omap_device.h>
-#include <plat/omap-pm.h>
+#include "soc.h"
#ifdef CONFIG_PM_RUNTIME
static int omap1_pm_runtime_suspend(struct device *dev)
diff --git a/arch/arm/mach-omap1/reset.c b/arch/arm/mach-omap1/reset.c
index b177091..5eebd7e 100644
--- a/arch/arm/mach-omap1/reset.c
+++ b/arch/arm/mach-omap1/reset.c
@@ -4,12 +4,24 @@
#include <linux/kernel.h>
#include <linux/io.h>
-#include <plat/prcm.h>
-
#include <mach/hardware.h>
+#include "iomap.h"
#include "common.h"
+/* ARM_SYSST bit shifts related to SoC reset sources */
+#define ARM_SYSST_POR_SHIFT 5
+#define ARM_SYSST_EXT_RST_SHIFT 4
+#define ARM_SYSST_ARM_WDRST_SHIFT 2
+#define ARM_SYSST_GLOB_SWRST_SHIFT 1
+
+/* Standardized reset source bits (across all OMAP SoCs) */
+#define OMAP_GLOBAL_COLD_RST_SRC_ID_SHIFT 0
+#define OMAP_GLOBAL_WARM_RST_SRC_ID_SHIFT 1
+#define OMAP_MPU_WD_RST_SRC_ID_SHIFT 3
+#define OMAP_EXTWARM_RST_SRC_ID_SHIFT 5
+
+
void omap1_restart(char mode, const char *cmd)
{
/*
@@ -23,3 +35,28 @@
omap_writew(1, ARM_RSTCT1);
}
+
+/**
+ * omap1_get_reset_sources - return the source of the SoC's last reset
+ *
+ * Returns bits that represent the last reset source for the SoC. The
+ * format is standardized across OMAPs for use by the OMAP watchdog.
+ */
+u32 omap1_get_reset_sources(void)
+{
+ u32 ret = 0;
+ u16 rs;
+
+ rs = __raw_readw(OMAP1_IO_ADDRESS(ARM_SYSST));
+
+ if (rs & (1 << ARM_SYSST_POR_SHIFT))
+ ret |= 1 << OMAP_GLOBAL_COLD_RST_SRC_ID_SHIFT;
+ if (rs & (1 << ARM_SYSST_EXT_RST_SHIFT))
+ ret |= 1 << OMAP_EXTWARM_RST_SRC_ID_SHIFT;
+ if (rs & (1 << ARM_SYSST_ARM_WDRST_SHIFT))
+ ret |= 1 << OMAP_MPU_WD_RST_SRC_ID_SHIFT;
+ if (rs & (1 << ARM_SYSST_GLOB_SWRST_SHIFT))
+ ret |= 1 << OMAP_GLOBAL_WARM_RST_SRC_ID_SHIFT;
+
+ return ret;
+}
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index b9d6834..d1ac080 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -23,7 +23,6 @@
#include <asm/mach-types.h>
#include <mach/mux.h>
-#include <plat/fpga.h>
#include "pm.h"
diff --git a/arch/arm/mach-omap1/sleep.S b/arch/arm/mach-omap1/sleep.S
index 0e62874..a908c51 100644
--- a/arch/arm/mach-omap1/sleep.S
+++ b/arch/arm/mach-omap1/sleep.S
@@ -36,6 +36,8 @@
#include <asm/assembler.h>
+#include <mach/hardware.h>
+
#include "iomap.h"
#include "pm.h"
diff --git a/arch/arm/mach-omap1/soc.h b/arch/arm/mach-omap1/soc.h
new file mode 100644
index 0000000..69daf01
--- /dev/null
+++ b/arch/arm/mach-omap1/soc.h
@@ -0,0 +1,4 @@
+/*
+ * We can move mach/soc.h here once the drivers are fixed
+ */
+#include <mach/soc.h>
diff --git a/arch/arm/mach-omap1/sram-init.c b/arch/arm/mach-omap1/sram-init.c
new file mode 100644
index 0000000..6431b0f8
--- /dev/null
+++ b/arch/arm/mach-omap1/sram-init.c
@@ -0,0 +1,76 @@
+/*
+ * OMAP SRAM detection and management
+ *
+ * Copyright (C) 2005 Nokia Corporation
+ * Written by Tony Lindgren <tony@atomide.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+
+#include <asm/fncpy.h>
+#include <asm/tlb.h>
+#include <asm/cacheflush.h>
+
+#include <asm/mach/map.h>
+
+#include "soc.h"
+#include "sram.h"
+
+#define OMAP1_SRAM_PA 0x20000000
+#define SRAM_BOOTLOADER_SZ 0x80
+
+/*
+ * The amount of SRAM depends on the core type.
+ * Note that we cannot try to test for SRAM here because writes
+ * to secure SRAM will hang the system. Also the SRAM is not
+ * yet mapped at this point.
+ */
+static void __init omap_detect_and_map_sram(void)
+{
+ unsigned long omap_sram_skip = SRAM_BOOTLOADER_SZ;
+ unsigned long omap_sram_start = OMAP1_SRAM_PA;
+ unsigned long omap_sram_size;
+
+ if (cpu_is_omap7xx())
+ omap_sram_size = 0x32000; /* 200K */
+ else if (cpu_is_omap15xx())
+ omap_sram_size = 0x30000; /* 192K */
+ else if (cpu_is_omap1610() || cpu_is_omap1611() ||
+ cpu_is_omap1621() || cpu_is_omap1710())
+ omap_sram_size = 0x4000; /* 16K */
+ else {
+ pr_err("Could not detect SRAM size\n");
+ omap_sram_size = 0x4000;
+ }
+
+ omap_map_sram(omap_sram_start, omap_sram_size,
+ omap_sram_skip, 1);
+}
+
+static void (*_omap_sram_reprogram_clock)(u32 dpllctl, u32 ckctl);
+
+void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl)
+{
+ BUG_ON(!_omap_sram_reprogram_clock);
+ /* On 730, bit 13 must always be 1 */
+ if (cpu_is_omap7xx())
+ ckctl |= 0x2000;
+ _omap_sram_reprogram_clock(dpllctl, ckctl);
+}
+
+int __init omap_sram_init(void)
+{
+ omap_detect_and_map_sram();
+ _omap_sram_reprogram_clock =
+ omap_sram_push(omap1_sram_reprogram_clock,
+ omap1_sram_reprogram_clock_sz);
+
+ return 0;
+}
diff --git a/arch/arm/mach-omap1/sram.h b/arch/arm/mach-omap1/sram.h
new file mode 100644
index 0000000..d5a6c83
--- /dev/null
+++ b/arch/arm/mach-omap1/sram.h
@@ -0,0 +1,7 @@
+#include <plat/sram.h>
+
+extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl);
+
+/* Do not use these */
+extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
+extern unsigned long omap1_sram_reprogram_clock_sz;
diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c
index 7452954..8936819 100644
--- a/arch/arm/mach-omap1/timer32k.c
+++ b/arch/arm/mach-omap1/timer32k.c
@@ -50,6 +50,7 @@
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
+#include <plat/counter-32k.h>
#include <plat/dmtimer.h>
#include <mach/hardware.h>
diff --git a/arch/arm/mach-omap1/usb.c b/arch/arm/mach-omap1/usb.c
index 84267ed..104fed36 100644
--- a/arch/arm/mach-omap1/usb.c
+++ b/arch/arm/mach-omap1/usb.c
@@ -301,7 +301,7 @@
#endif
-u32 __init omap1_usb0_init(unsigned nwires, unsigned is_device)
+static u32 __init omap1_usb0_init(unsigned nwires, unsigned is_device)
{
u32 syscon1 = 0;
@@ -409,7 +409,7 @@
return syscon1 << 16;
}
-u32 __init omap1_usb1_init(unsigned nwires)
+static u32 __init omap1_usb1_init(unsigned nwires)
{
u32 syscon1 = 0;
@@ -475,7 +475,7 @@
return syscon1 << 20;
}
-u32 __init omap1_usb2_init(unsigned nwires, unsigned alt_pingroup)
+static u32 __init omap1_usb2_init(unsigned nwires, unsigned alt_pingroup)
{
u32 syscon1 = 0;
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 2a1a898..d669e22 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -11,7 +11,6 @@
select I2C_OMAP
select MENELAUS if ARCH_OMAP2
select NEON if ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5
- select PINCTRL
select PM_RUNTIME
select REGULATOR
select SERIAL_OMAP
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index fe40d9e..dd76ff7 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -4,30 +4,37 @@
# Common support
obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer.o pm.o \
- common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o
+ common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o \
+ omap_device.o sram.o
-# INTCPS IP block support - XXX should be moved to drivers/
-obj-$(CONFIG_ARCH_OMAP2) += irq.o
-obj-$(CONFIG_ARCH_OMAP3) += irq.o
-obj-$(CONFIG_SOC_AM33XX) += irq.o
+omap-2-3-common = irq.o
+hwmod-common = omap_hwmod.o \
+ omap_hwmod_common_data.o
+clock-common = clock.o clock_common_data.o \
+ clkt_dpll.o clkt_clksel.o
+secure-common = omap-smc.o omap-secure.o
-# Secure monitor API support
-obj-$(CONFIG_ARCH_OMAP3) += omap-smc.o omap-secure.o
-obj-$(CONFIG_ARCH_OMAP4) += omap-smc.o omap-secure.o
-obj-$(CONFIG_SOC_OMAP5) += omap-smc.o omap-secure.o
+obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common)
+obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common) $(secure-common)
+obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common) $(secure-common)
+obj-$(CONFIG_SOC_AM33XX) += irq.o $(hwmod-common)
+obj-$(CONFIG_SOC_OMAP5) += prm44xx.o $(hwmod-common) $(secure-common)
ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),)
obj-y += mcbsp.o
endif
-obj-$(CONFIG_TWL4030_CORE) += omap_twl.o
+obj-$(CONFIG_TWL4030_CORE) += omap_twl.o
+obj-$(CONFIG_SOC_HAS_OMAP2_SDRC) += sdrc.o
# SMP support ONLY available for OMAP4
obj-$(CONFIG_SMP) += omap-smp.o omap-headsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += omap-hotplug.o
-obj-$(CONFIG_ARCH_OMAP4) += omap4-common.o omap-wakeupgen.o
-obj-$(CONFIG_SOC_OMAP5) += omap4-common.o omap-wakeupgen.o
+omap-4-5-common = omap4-common.o omap-wakeupgen.o \
+ sleep44xx.o
+obj-$(CONFIG_ARCH_OMAP4) += $(omap-4-5-common)
+obj-$(CONFIG_SOC_OMAP5) += $(omap-4-5-common)
plus_sec := $(call as-instr,.arch_extension sec,+sec)
AFLAGS_omap-headsmp.o :=-Wa,-march=armv7-a$(plus_sec)
@@ -43,6 +50,11 @@
AFLAGS_sram243x.o :=-Wa,-march=armv6
AFLAGS_sram34xx.o :=-Wa,-march=armv7-a
+# Restart code (OMAP4/5 currently in omap4-common.c)
+obj-$(CONFIG_SOC_OMAP2420) += omap2-restart.o
+obj-$(CONFIG_SOC_OMAP2430) += omap2-restart.o
+obj-$(CONFIG_ARCH_OMAP3) += omap3-restart.o
+
# Pin multiplexing
obj-$(CONFIG_SOC_OMAP2420) += mux2420.o
obj-$(CONFIG_SOC_OMAP2430) += mux2430.o
@@ -52,7 +64,6 @@
# SMS/SDRC
obj-$(CONFIG_ARCH_OMAP2) += sdrc2xxx.o
# obj-$(CONFIG_ARCH_OMAP3) += sdrc3xxx.o
-obj-$(CONFIG_SOC_HAS_OMAP2_SDRC) += sdrc.o
# OPP table initialization
ifeq ($(CONFIG_PM_OPP),y)
@@ -62,16 +73,18 @@
endif
# Power Management
+obj-$(CONFIG_OMAP_PM_NOOP) += omap-pm-noop.o
+
ifeq ($(CONFIG_PM),y)
-obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o sleep24xx.o
+obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o
+obj-$(CONFIG_ARCH_OMAP2) += sleep24xx.o
obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o
obj-$(CONFIG_ARCH_OMAP4) += pm44xx.o omap-mpuss-lowpower.o
-obj-$(CONFIG_ARCH_OMAP4) += sleep44xx.o
-obj-$(CONFIG_SOC_OMAP5) += omap-mpuss-lowpower.o sleep44xx.o
+obj-$(CONFIG_SOC_OMAP5) += omap-mpuss-lowpower.o
obj-$(CONFIG_PM_DEBUG) += pm-debug.o
obj-$(CONFIG_POWER_AVS_OMAP) += sr_device.o
-obj-$(CONFIG_POWER_AVS_OMAP_CLASS3) += smartreflex-class3.o
+obj-$(CONFIG_POWER_AVS_OMAP_CLASS3) += smartreflex-class3.o
AFLAGS_sleep24xx.o :=-Wa,-march=armv6
AFLAGS_sleep34xx.o :=-Wa,-march=armv7-a$(plus_sec)
@@ -83,76 +96,82 @@
endif
ifeq ($(CONFIG_CPU_IDLE),y)
-obj-$(CONFIG_ARCH_OMAP3) += cpuidle34xx.o
-obj-$(CONFIG_ARCH_OMAP4) += cpuidle44xx.o
+obj-$(CONFIG_ARCH_OMAP3) += cpuidle34xx.o
+obj-$(CONFIG_ARCH_OMAP4) += cpuidle44xx.o
endif
# PRCM
-obj-y += prcm.o prm_common.o
-obj-$(CONFIG_ARCH_OMAP2) += cm2xxx_3xxx.o prm2xxx_3xxx.o
-obj-$(CONFIG_ARCH_OMAP3) += cm2xxx_3xxx.o prm2xxx_3xxx.o
+obj-y += prm_common.o cm_common.o
+obj-$(CONFIG_ARCH_OMAP2) += prm2xxx_3xxx.o prm2xxx.o cm2xxx.o
+obj-$(CONFIG_ARCH_OMAP3) += prm2xxx_3xxx.o prm3xxx.o cm3xxx.o
obj-$(CONFIG_ARCH_OMAP3) += vc3xxx_data.o vp3xxx_data.o
obj-$(CONFIG_SOC_AM33XX) += prm33xx.o cm33xx.o
omap-prcm-4-5-common = cminst44xx.o cm44xx.o prm44xx.o \
prcm_mpu44xx.o prminst44xx.o \
- vc44xx_data.o vp44xx_data.o \
- prm44xx.o
+ vc44xx_data.o vp44xx_data.o
obj-$(CONFIG_ARCH_OMAP4) += $(omap-prcm-4-5-common)
obj-$(CONFIG_SOC_OMAP5) += $(omap-prcm-4-5-common)
# OMAP voltage domains
-obj-y += voltage.o vc.o vp.o
+voltagedomain-common := voltage.o vc.o vp.o
+obj-$(CONFIG_ARCH_OMAP2) += $(voltagedomain-common)
obj-$(CONFIG_ARCH_OMAP2) += voltagedomains2xxx_data.o
+obj-$(CONFIG_ARCH_OMAP3) += $(voltagedomain-common)
obj-$(CONFIG_ARCH_OMAP3) += voltagedomains3xxx_data.o
+obj-$(CONFIG_ARCH_OMAP4) += $(voltagedomain-common)
obj-$(CONFIG_ARCH_OMAP4) += voltagedomains44xx_data.o
-obj-$(CONFIG_SOC_AM33XX) += voltagedomains33xx_data.o
+obj-$(CONFIG_SOC_AM33XX) += $(voltagedomain-common)
+obj-$(CONFIG_SOC_AM33XX) += voltagedomains33xx_data.o
+obj-$(CONFIG_SOC_OMAP5) += $(voltagedomain-common)
# OMAP powerdomain framework
-obj-y += powerdomain.o powerdomain-common.o
+powerdomain-common += powerdomain.o powerdomain-common.o
+obj-$(CONFIG_ARCH_OMAP2) += $(powerdomain-common)
obj-$(CONFIG_ARCH_OMAP2) += powerdomains2xxx_data.o
-obj-$(CONFIG_ARCH_OMAP2) += powerdomain2xxx_3xxx.o
obj-$(CONFIG_ARCH_OMAP2) += powerdomains2xxx_3xxx_data.o
-obj-$(CONFIG_ARCH_OMAP3) += powerdomain2xxx_3xxx.o
+obj-$(CONFIG_ARCH_OMAP3) += $(powerdomain-common)
obj-$(CONFIG_ARCH_OMAP3) += powerdomains3xxx_data.o
obj-$(CONFIG_ARCH_OMAP3) += powerdomains2xxx_3xxx_data.o
-obj-$(CONFIG_ARCH_OMAP4) += powerdomain44xx.o
+obj-$(CONFIG_ARCH_OMAP4) += $(powerdomain-common)
obj-$(CONFIG_ARCH_OMAP4) += powerdomains44xx_data.o
-obj-$(CONFIG_SOC_AM33XX) += powerdomain33xx.o
+obj-$(CONFIG_SOC_AM33XX) += $(powerdomain-common)
obj-$(CONFIG_SOC_AM33XX) += powerdomains33xx_data.o
-obj-$(CONFIG_SOC_OMAP5) += powerdomain44xx.o
+obj-$(CONFIG_SOC_OMAP5) += $(powerdomain-common)
# PRCM clockdomain control
-obj-y += clockdomain.o
-obj-$(CONFIG_ARCH_OMAP2) += clockdomain2xxx_3xxx.o
+clockdomain-common += clockdomain.o
+obj-$(CONFIG_ARCH_OMAP2) += $(clockdomain-common)
obj-$(CONFIG_ARCH_OMAP2) += clockdomains2xxx_3xxx_data.o
obj-$(CONFIG_SOC_OMAP2420) += clockdomains2420_data.o
obj-$(CONFIG_SOC_OMAP2430) += clockdomains2430_data.o
-obj-$(CONFIG_ARCH_OMAP3) += clockdomain2xxx_3xxx.o
+obj-$(CONFIG_ARCH_OMAP3) += $(clockdomain-common)
obj-$(CONFIG_ARCH_OMAP3) += clockdomains2xxx_3xxx_data.o
obj-$(CONFIG_ARCH_OMAP3) += clockdomains3xxx_data.o
-obj-$(CONFIG_ARCH_OMAP4) += clockdomain44xx.o
+obj-$(CONFIG_ARCH_OMAP4) += $(clockdomain-common)
obj-$(CONFIG_ARCH_OMAP4) += clockdomains44xx_data.o
-obj-$(CONFIG_SOC_AM33XX) += clockdomain33xx.o
+obj-$(CONFIG_SOC_AM33XX) += $(clockdomain-common)
obj-$(CONFIG_SOC_AM33XX) += clockdomains33xx_data.o
-obj-$(CONFIG_SOC_OMAP5) += clockdomain44xx.o
+obj-$(CONFIG_SOC_OMAP5) += $(clockdomain-common)
# Clock framework
-obj-y += clock.o clock_common_data.o \
- clkt_dpll.o clkt_clksel.o
-obj-$(CONFIG_ARCH_OMAP2) += clock2xxx.o
-obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpllcore.o clkt2xxx_sys.o
+obj-$(CONFIG_ARCH_OMAP2) += $(clock-common) clock2xxx.o
+obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_sys.o
+obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpllcore.o
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_virt_prcm_set.o
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_apll.o clkt2xxx_osc.o
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpll.o clkt_iclk.o
obj-$(CONFIG_SOC_OMAP2420) += clock2420_data.o
obj-$(CONFIG_SOC_OMAP2430) += clock2430.o clock2430_data.o
-obj-$(CONFIG_ARCH_OMAP3) += clock3xxx.o
+obj-$(CONFIG_ARCH_OMAP3) += $(clock-common) clock3xxx.o
obj-$(CONFIG_ARCH_OMAP3) += clock34xx.o clkt34xx_dpll3m2.o
-obj-$(CONFIG_ARCH_OMAP3) += clock3517.o clock36xx.o clkt_iclk.o
+obj-$(CONFIG_ARCH_OMAP3) += clock3517.o clock36xx.o
obj-$(CONFIG_ARCH_OMAP3) += dpll3xxx.o clock3xxx_data.o
-obj-$(CONFIG_ARCH_OMAP4) += clock44xx_data.o
+obj-$(CONFIG_ARCH_OMAP3) += clkt_iclk.o
+obj-$(CONFIG_ARCH_OMAP4) += $(clock-common) clock44xx_data.o
obj-$(CONFIG_ARCH_OMAP4) += dpll3xxx.o dpll44xx.o
-obj-$(CONFIG_SOC_AM33XX) += dpll3xxx.o clock33xx_data.o
+obj-$(CONFIG_SOC_AM33XX) += $(clock-common) dpll3xxx.o
+obj-$(CONFIG_SOC_AM33XX) += clock33xx_data.o
+obj-$(CONFIG_SOC_OMAP5) += $(clock-common)
obj-$(CONFIG_SOC_OMAP5) += dpll3xxx.o dpll44xx.o
# OMAP2 clock rate set data (old "OPP" data)
@@ -160,7 +179,6 @@
obj-$(CONFIG_SOC_OMAP2430) += opp2430_data.o
# hwmod data
-obj-y += omap_hwmod_common_data.o
obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2xxx_ipblock_data.o
obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2xxx_3xxx_ipblock_data.o
obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2xxx_interconnect_data.o
@@ -206,10 +224,10 @@
obj-$(CONFIG_MACH_OMAP_2430SDP) += board-2430sdp.o
obj-$(CONFIG_MACH_OMAP_APOLLON) += board-apollon.o
obj-$(CONFIG_MACH_OMAP3_BEAGLE) += board-omap3beagle.o
-obj-$(CONFIG_MACH_DEVKIT8000) += board-devkit8000.o
+obj-$(CONFIG_MACH_DEVKIT8000) += board-devkit8000.o
obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o
-obj-$(CONFIG_MACH_OMAP3530_LV_SOM) += board-omap3logic.o
-obj-$(CONFIG_MACH_OMAP3_TORPEDO) += board-omap3logic.o
+obj-$(CONFIG_MACH_OMAP3530_LV_SOM) += board-omap3logic.o
+obj-$(CONFIG_MACH_OMAP3_TORPEDO) += board-omap3logic.o
obj-$(CONFIG_MACH_ENCORE) += board-omap3encore.o
obj-$(CONFIG_MACH_OVERO) += board-overo.o
obj-$(CONFIG_MACH_OMAP3EVM) += board-omap3evm.o
diff --git a/arch/arm/mach-omap2/am33xx.h b/arch/arm/mach-omap2/am33xx.h
index 06c19bb..43296c1 100644
--- a/arch/arm/mach-omap2/am33xx.h
+++ b/arch/arm/mach-omap2/am33xx.h
@@ -21,5 +21,6 @@
#define AM33XX_SCM_BASE 0x44E10000
#define AM33XX_CTRL_BASE AM33XX_SCM_BASE
#define AM33XX_PRCM_BASE 0x44E00000
+#define AM33XX_TAP_BASE (AM33XX_CTRL_BASE + 0x3FC)
#endif /* __ASM_ARCH_AM33XX_H */
diff --git a/arch/arm/mach-omap2/am35xx-emac.c b/arch/arm/mach-omap2/am35xx-emac.c
index d0c54c5..af11dcd 100644
--- a/arch/arm/mach-omap2/am35xx-emac.c
+++ b/arch/arm/mach-omap2/am35xx-emac.c
@@ -18,7 +18,7 @@
#include <linux/err.h>
#include <linux/davinci_emac.h>
#include <asm/system.h>
-#include <plat/omap_device.h>
+#include "omap_device.h"
#include "am35xx.h"
#include "control.h"
#include "am35xx-emac.h"
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 95b384d..4815ea6 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -28,14 +28,12 @@
#include <linux/io.h>
#include <linux/gpio.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include "common.h"
-#include <plat/gpmc.h>
-#include <plat/usb.h>
+#include "gpmc.h"
#include "gpmc-smc91x.h"
#include <video/omapdss.h>
@@ -287,5 +285,5 @@
.init_machine = omap_2430sdp_init,
.init_late = omap2430_init_late,
.timer = &omap2_timer,
- .restart = omap_prcm_restart,
+ .restart = omap2xxx_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index 96cd369..6601754 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -30,15 +30,15 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/usb.h>
#include "common.h"
-#include <plat/dma.h>
-#include <plat/gpmc.h>
+#include <plat-omap/dma-omap.h>
#include <video/omapdss.h>
#include <video/omap-panel-tfp410.h>
+#include "gpmc.h"
#include "gpmc-smc91x.h"
+#include "soc.h"
#include "board-flash.h"
#include "mux.h"
#include "sdram-qimonda-hyb18m512160af-6.h"
@@ -597,5 +597,5 @@
.init_machine = omap_3430sdp_init,
.init_late = omap3430_init_late,
.timer = &omap3_timer,
- .restart = omap_prcm_restart,
+ .restart = omap3xxx_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c
index fc224ad..050aaa7 100644
--- a/arch/arm/mach-omap2/board-3630sdp.c
+++ b/arch/arm/mach-omap2/board-3630sdp.c
@@ -18,9 +18,8 @@
#include "common.h"
#include "gpmc-smc91x.h"
-#include <plat/usb.h>
-#include <mach/board-zoom.h>
+#include "board-zoom.h"
#include "board-flash.h"
#include "mux.h"
@@ -213,5 +212,5 @@
.init_machine = omap_sdp_init,
.init_late = omap3630_init_late,
.timer = &omap3_timer,
- .restart = omap_prcm_restart,
+ .restart = omap3xxx_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 3669c12..85dfa71 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -27,6 +27,7 @@
#include <linux/leds.h>
#include <linux/leds_pwm.h>
#include <linux/platform_data/omap4-keypad.h>
+#include <linux/usb/musb.h>
#include <asm/hardware/gic.h>
#include <asm/mach-types.h>
@@ -34,8 +35,6 @@
#include <asm/mach/map.h>
#include "common.h"
-#include <plat/usb.h>
-#include <plat/mmc.h>
#include "omap4-keypad.h"
#include <video/omapdss.h>
#include <video/omap-panel-nokia-dsi.h>
@@ -45,6 +44,7 @@
#include "soc.h"
#include "mux.h"
+#include "mmc.h"
#include "hsmmc.h"
#include "control.h"
#include "common-board-devices.h"
@@ -881,5 +881,5 @@
.init_machine = omap_4430sdp_init,
.init_late = omap4430_init_late,
.timer = &omap4_timer,
- .restart = omap_prcm_restart,
+ .restart = omap44xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c
index 318fead..51b96a1 100644
--- a/arch/arm/mach-omap2/board-am3517crane.c
+++ b/arch/arm/mach-omap2/board-am3517crane.c
@@ -26,7 +26,6 @@
#include <asm/mach/map.h>
#include "common.h"
-#include <plat/usb.h>
#include "am35xx-emac.h"
#include "mux.h"
@@ -94,5 +93,5 @@
.init_machine = am3517_crane_init,
.init_late = am35xx_init_late,
.timer = &omap3_timer,
- .restart = omap_prcm_restart,
+ .restart = omap3xxx_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index e162897..4be58fd 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -25,6 +25,7 @@
#include <linux/can/platform/ti_hecc.h>
#include <linux/davinci_emac.h>
#include <linux/mmc/host.h>
+#include <linux/usb/musb.h>
#include <linux/platform_data/gpio-omap.h>
#include "am35xx.h"
@@ -33,7 +34,6 @@
#include <asm/mach/map.h>
#include "common.h"
-#include <plat/usb.h>
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
#include <video/omap-panel-tfp410.h>
@@ -393,5 +393,5 @@
.init_machine = am3517_evm_init,
.init_late = am35xx_init_late,
.timer = &omap3_timer,
- .restart = omap_prcm_restart,
+ .restart = omap3xxx_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index cea3aba..5d0a61f 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -28,14 +28,14 @@
#include <linux/clk.h>
#include <linux/smc91x.h>
#include <linux/gpio.h>
+#include <linux/platform_data/leds-omap.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
-#include <plat/led.h>
#include "common.h"
-#include <plat/gpmc.h>
+#include "gpmc.h"
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
@@ -338,5 +338,5 @@
.init_machine = omap_apollon_init,
.init_late = omap2420_init_late,
.timer = &omap2_timer,
- .restart = omap_prcm_restart,
+ .restart = omap2xxx_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index 376d26e..c8e37dc 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -38,21 +38,19 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include "common.h"
#include <linux/platform_data/mtd-nand-omap2.h>
-#include <plat/gpmc.h>
-#include <plat/usb.h>
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
#include <video/omap-panel-tfp410.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
-#include <mach/hardware.h>
-
+#include "common.h"
#include "mux.h"
#include "sdram-micron-mt46h32m32lf-6.h"
#include "hsmmc.h"
#include "common-board-devices.h"
+#include "gpmc.h"
+#include "gpmc-nand.h"
#define CM_T35_GPIO_PENDOWN 57
#define SB_T35_USB_HUB_RESET_GPIO 167
@@ -181,7 +179,7 @@
static void __init cm_t35_init_nand(void)
{
- if (gpmc_nand_init(&cm_t35_nand_data) < 0)
+ if (gpmc_nand_init(&cm_t35_nand_data, NULL) < 0)
pr_err("CM-T35: Unable to register NAND device\n");
}
#else
@@ -753,18 +751,18 @@
.init_machine = cm_t35_init,
.init_late = omap35xx_init_late,
.timer = &omap3_timer,
- .restart = omap_prcm_restart,
+ .restart = omap3xxx_restart,
MACHINE_END
MACHINE_START(CM_T3730, "Compulab CM-T3730")
- .atag_offset = 0x100,
- .reserve = omap_reserve,
- .map_io = omap3_map_io,
- .init_early = omap3630_init_early,
- .init_irq = omap3_init_irq,
+ .atag_offset = 0x100,
+ .reserve = omap_reserve,
+ .map_io = omap3_map_io,
+ .init_early = omap3630_init_early,
+ .init_irq = omap3_init_irq,
.handle_irq = omap3_intc_handle_irq,
- .init_machine = cm_t3730_init,
+ .init_machine = cm_t3730_init,
.init_late = omap3630_init_late,
- .timer = &omap3_timer,
- .restart = omap_prcm_restart,
+ .timer = &omap3_timer,
+ .restart = omap3xxx_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c
index 59c0a45..699caec 100644
--- a/arch/arm/mach-omap2/board-cm-t3517.c
+++ b/arch/arm/mach-omap2/board-cm-t3517.c
@@ -39,9 +39,8 @@
#include <asm/mach/map.h>
#include "common.h"
-#include <plat/usb.h>
#include <linux/platform_data/mtd-nand-omap2.h>
-#include <plat/gpmc.h>
+#include "gpmc.h"
#include "am35xx.h"
@@ -49,6 +48,7 @@
#include "control.h"
#include "common-board-devices.h"
#include "am35xx-emac.h"
+#include "gpmc-nand.h"
#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
static struct gpio_led cm_t3517_leds[] = {
@@ -240,7 +240,7 @@
static void __init cm_t3517_init_nand(void)
{
- if (gpmc_nand_init(&cm_t3517_nand_data) < 0)
+ if (gpmc_nand_init(&cm_t3517_nand_data, NULL) < 0)
pr_err("CM-T3517: NAND initialization failed\n");
}
#else
@@ -298,5 +298,5 @@
.init_machine = cm_t3517_init,
.init_late = am35xx_init_late,
.timer = &omap3_timer,
- .restart = omap_prcm_restart,
+ .restart = omap3xxx_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 1fd161e..7667eb7 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -39,9 +39,8 @@
#include <asm/mach/flash.h>
#include "common.h"
-#include <plat/gpmc.h>
+#include "gpmc.h"
#include <linux/platform_data/mtd-nand-omap2.h>
-#include <plat/usb.h>
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
#include <video/omap-panel-tfp410.h>
@@ -55,8 +54,11 @@
#include "sdram-micron-mt46h32m32lf-6.h"
#include "mux.h"
#include "hsmmc.h"
+#include "board-flash.h"
#include "common-board-devices.h"
+#define NAND_CS 0
+
#define OMAP_DM9000_GPIO_IRQ 25
#define OMAP3_DEVKIT_TS_GPIO 27
@@ -621,8 +623,9 @@
usb_musb_init(NULL);
usbhs_init(&usbhs_bdata);
- omap_nand_flash_init(NAND_BUSWIDTH_16, devkit8000_nand_partitions,
- ARRAY_SIZE(devkit8000_nand_partitions));
+ board_nand_init(devkit8000_nand_partitions,
+ ARRAY_SIZE(devkit8000_nand_partitions), NAND_CS,
+ NAND_BUSWIDTH_16, NULL);
omap_twl4030_audio_init("omap3beagle");
/* Ensure SDRC pins are mux'd for self-refresh */
@@ -640,5 +643,5 @@
.init_machine = devkit8000_init,
.init_late = omap35xx_init_late,
.timer = &omap3_secure_timer,
- .restart = omap_prcm_restart,
+ .restart = omap3xxx_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c
index e642acf..c33adea 100644
--- a/arch/arm/mach-omap2/board-flash.c
+++ b/arch/arm/mach-omap2/board-flash.c
@@ -17,14 +17,14 @@
#include <linux/mtd/physmap.h>
#include <linux/io.h>
-#include <plat/cpu.h>
-#include <plat/gpmc.h>
#include <linux/platform_data/mtd-nand-omap2.h>
#include <linux/platform_data/mtd-onenand-omap2.h>
-#include <plat/tc.h>
+#include "soc.h"
#include "common.h"
#include "board-flash.h"
+#include "gpmc-onenand.h"
+#include "gpmc-nand.h"
#define REG_FPGA_REV 0x10
#define REG_FPGA_DIP_SWITCH_INPUT2 0x60
@@ -104,36 +104,35 @@
defined(CONFIG_MTD_NAND_OMAP2_MODULE)
/* Note that all values in this struct are in nanoseconds */
-static struct gpmc_timings nand_timings = {
+struct gpmc_timings nand_default_timings[1] = {
+ {
+ .sync_clk = 0,
- .sync_clk = 0,
+ .cs_on = 0,
+ .cs_rd_off = 36,
+ .cs_wr_off = 36,
- .cs_on = 0,
- .cs_rd_off = 36,
- .cs_wr_off = 36,
+ .adv_on = 6,
+ .adv_rd_off = 24,
+ .adv_wr_off = 36,
- .adv_on = 6,
- .adv_rd_off = 24,
- .adv_wr_off = 36,
+ .we_off = 30,
+ .oe_off = 48,
- .we_off = 30,
- .oe_off = 48,
+ .access = 54,
+ .rd_cycle = 72,
+ .wr_cycle = 72,
- .access = 54,
- .rd_cycle = 72,
- .wr_cycle = 72,
-
- .wr_access = 30,
- .wr_data_mux_bus = 0,
+ .wr_access = 30,
+ .wr_data_mux_bus = 0,
+ },
};
-static struct omap_nand_platform_data board_nand_data = {
- .gpmc_t = &nand_timings,
-};
+static struct omap_nand_platform_data board_nand_data;
void
-__init board_nand_init(struct mtd_partition *nand_parts,
- u8 nr_parts, u8 cs, int nand_type)
+__init board_nand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs,
+ int nand_type, struct gpmc_timings *gpmc_t)
{
board_nand_data.cs = cs;
board_nand_data.parts = nand_parts;
@@ -141,7 +140,7 @@
board_nand_data.devsize = nand_type;
board_nand_data.ecc_opt = OMAP_ECC_HAMMING_CODE_DEFAULT;
- gpmc_nand_init(&board_nand_data);
+ gpmc_nand_init(&board_nand_data, gpmc_t);
}
#endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */
@@ -238,5 +237,6 @@
pr_err("NAND: Unable to find configuration in GPMC\n");
else
board_nand_init(partition_info[2].parts,
- partition_info[2].nr_parts, nandcs, nand_type);
+ partition_info[2].nr_parts, nandcs,
+ nand_type, nand_default_timings);
}
diff --git a/arch/arm/mach-omap2/board-flash.h b/arch/arm/mach-omap2/board-flash.h
index c44b70d..2fb5d41 100644
--- a/arch/arm/mach-omap2/board-flash.h
+++ b/arch/arm/mach-omap2/board-flash.h
@@ -12,7 +12,7 @@
*/
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
-#include <plat/gpmc.h>
+#include "gpmc.h"
#define PDC_NOR 1
#define PDC_NAND 2
@@ -40,12 +40,14 @@
#if defined(CONFIG_MTD_NAND_OMAP2) || \
defined(CONFIG_MTD_NAND_OMAP2_MODULE)
extern void board_nand_init(struct mtd_partition *nand_parts,
- u8 nr_parts, u8 cs, int nand_type);
+ u8 nr_parts, u8 cs, int nand_type, struct gpmc_timings *gpmc_t);
+extern struct gpmc_timings nand_default_timings[];
#else
static inline void board_nand_init(struct mtd_partition *nand_parts,
- u8 nr_parts, u8 cs, int nand_type)
+ u8 nr_parts, u8 cs, int nand_type, struct gpmc_timings *gpmc_t)
{
}
+#define nand_default_timings NULL
#endif
#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 601ecdf..475e14f 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -57,7 +57,7 @@
.init_machine = omap_generic_init,
.timer = &omap2_timer,
.dt_compat = omap242x_boards_compat,
- .restart = omap_prcm_restart,
+ .restart = omap2xxx_restart,
MACHINE_END
#endif
@@ -76,7 +76,7 @@
.init_machine = omap_generic_init,
.timer = &omap2_timer,
.dt_compat = omap243x_boards_compat,
- .restart = omap_prcm_restart,
+ .restart = omap2xxx_restart,
MACHINE_END
#endif
@@ -95,7 +95,7 @@
.init_machine = omap_generic_init,
.timer = &omap3_timer,
.dt_compat = omap3_boards_compat,
- .restart = omap_prcm_restart,
+ .restart = omap3xxx_restart,
MACHINE_END
#endif
@@ -134,7 +134,7 @@
.init_late = omap4430_init_late,
.timer = &omap4_timer,
.dt_compat = omap4_boards_compat,
- .restart = omap_prcm_restart,
+ .restart = omap44xx_restart,
MACHINE_END
#endif
@@ -154,6 +154,6 @@
.init_machine = omap_generic_init,
.timer = &omap5_timer,
.dt_compat = omap5_boards_compat,
- .restart = omap_prcm_restart,
+ .restart = omap44xx_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index 8d04bf8..b626dbe 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -26,15 +26,14 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/input/matrix_keypad.h>
+#include <linux/mfd/menelaus.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/menelaus.h>
-#include <plat/dma.h>
-#include <plat/gpmc.h>
-#include "debug-devices.h"
+#include <plat-omap/dma-omap.h>
+#include <plat/debug-devices.h>
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
@@ -42,6 +41,7 @@
#include "common.h"
#include "mux.h"
#include "control.h"
+#include "gpmc.h"
#define H4_FLASH_CS 0
#define H4_SMC91X_CS 1
@@ -386,5 +386,5 @@
.init_machine = omap_h4_init,
.init_late = omap2420_init_late,
.timer = &omap2_timer,
- .restart = omap_prcm_restart,
+ .restart = omap2xxx_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 48d5e41..0f24cb8 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -29,20 +29,19 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include "common.h"
-#include <plat/gpmc.h>
-#include <plat/usb.h>
-
#include <video/omapdss.h>
#include <video/omap-panel-tfp410.h>
#include <linux/platform_data/mtd-onenand-omap2.h>
+#include "common.h"
+#include "gpmc.h"
#include "mux.h"
#include "hsmmc.h"
#include "sdram-numonyx-m65kxxxxam.h"
#include "common-board-devices.h"
#include "board-flash.h"
#include "control.h"
+#include "gpmc-onenand.h"
#define IGEP2_SMSC911X_CS 5
#define IGEP2_SMSC911X_GPIO 176
@@ -175,7 +174,7 @@
pr_info("IGEP: initializing NAND memory device\n");
board_nand_init(igep_flash_partitions,
ARRAY_SIZE(igep_flash_partitions),
- 0, NAND_BUSWIDTH_16);
+ 0, NAND_BUSWIDTH_16, nand_default_timings);
} else if (mux == IGEP_SYSBOOT_ONENAND) {
pr_info("IGEP: initializing OneNAND memory device\n");
board_onenand_init(igep_flash_partitions,
@@ -580,6 +579,11 @@
} else
return;
+ /* Make sure that the GPIO pins are muxed correctly */
+ omap_mux_init_gpio(igep_wlan_bt_gpios[0].gpio, OMAP_PIN_OUTPUT);
+ omap_mux_init_gpio(igep_wlan_bt_gpios[1].gpio, OMAP_PIN_OUTPUT);
+ omap_mux_init_gpio(igep_wlan_bt_gpios[2].gpio, OMAP_PIN_OUTPUT);
+
err = gpio_request_array(igep_wlan_bt_gpios,
ARRAY_SIZE(igep_wlan_bt_gpios));
if (err) {
@@ -652,7 +656,7 @@
.init_machine = igep_init,
.init_late = omap35xx_init_late,
.timer = &omap3_timer,
- .restart = omap_prcm_restart,
+ .restart = omap3xxx_restart,
MACHINE_END
MACHINE_START(IGEP0030, "IGEP OMAP3 module")
@@ -665,5 +669,5 @@
.init_machine = igep_init,
.init_late = omap35xx_init_late,
.timer = &omap3_timer,
- .restart = omap_prcm_restart,
+ .restart = omap3xxx_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index ee8c3cf..0869f4f 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -35,9 +35,8 @@
#include <asm/mach/map.h>
#include "common.h"
-#include <plat/gpmc.h>
-#include <mach/board-zoom.h>
-#include <plat/usb.h>
+#include "board-zoom.h"
+#include "gpmc.h"
#include "gpmc-smsc911x.h"
#include <video/omapdss.h>
@@ -420,8 +419,8 @@
omap_serial_init();
omap_sdrc_init(NULL, NULL);
usb_musb_init(NULL);
- board_nand_init(ldp_nand_partitions,
- ARRAY_SIZE(ldp_nand_partitions), ZOOM_NAND_CS, 0);
+ board_nand_init(ldp_nand_partitions, ARRAY_SIZE(ldp_nand_partitions),
+ ZOOM_NAND_CS, 0, nand_default_timings);
omap_hsmmc_init(mmc);
ldp_display_init();
@@ -437,5 +436,5 @@
.init_machine = omap_ldp_init,
.init_late = omap3430_init_late,
.timer = &omap3_timer,
- .restart = omap_prcm_restart,
+ .restart = omap3xxx_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index d95f727..a4e167c 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -22,16 +22,17 @@
#include <linux/usb/musb.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
#include <linux/platform_data/mtd-onenand-omap2.h>
+#include <linux/mfd/menelaus.h>
#include <sound/tlv320aic3x.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include "common.h"
-#include <plat/menelaus.h>
-#include <plat/mmc.h>
+#include "mmc.h"
#include "mux.h"
+#include "gpmc-onenand.h"
#define TUSB6010_ASYNC_CS 1
#define TUSB6010_SYNC_CS 4
@@ -689,7 +690,7 @@
.init_machine = n8x0_init_machine,
.init_late = omap2420_init_late,
.timer = &omap2_timer,
- .restart = omap_prcm_restart,
+ .restart = omap2xxx_restart,
MACHINE_END
MACHINE_START(NOKIA_N810, "Nokia N810")
@@ -702,7 +703,7 @@
.init_machine = n8x0_init_machine,
.init_late = omap2420_init_late,
.timer = &omap2_timer,
- .restart = omap_prcm_restart,
+ .restart = omap2xxx_restart,
MACHINE_END
MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX")
@@ -715,5 +716,5 @@
.init_machine = n8x0_init_machine,
.init_late = omap2420_init_late,
.timer = &omap2_timer,
- .restart = omap_prcm_restart,
+ .restart = omap2xxx_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 388c431..22c483d 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -24,6 +24,7 @@
#include <linux/input.h>
#include <linux/gpio_keys.h>
#include <linux/opp.h>
+#include <linux/cpu.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
@@ -38,19 +39,22 @@
#include <asm/mach/map.h>
#include <asm/mach/flash.h>
-#include "common.h"
#include <video/omapdss.h>
#include <video/omap-panel-tfp410.h>
-#include <plat/gpmc.h>
#include <linux/platform_data/mtd-nand-omap2.h>
-#include <plat/usb.h>
-#include <plat/omap_device.h>
+#include "common.h"
+#include "omap_device.h"
+#include "gpmc.h"
+#include "soc.h"
#include "mux.h"
#include "hsmmc.h"
#include "pm.h"
+#include "board-flash.h"
#include "common-board-devices.h"
+#define NAND_CS 0
+
/*
* OMAP3 Beagle revision
* Run time detection of Beagle revision is done by reading GPIO.
@@ -444,27 +448,31 @@
};
#endif
-static void __init beagle_opp_init(void)
+static int __init beagle_opp_init(void)
{
int r = 0;
- /* Initialize the omap3 opp table */
- if (omap3_opp_init()) {
+ if (!machine_is_omap3_beagle())
+ return 0;
+
+ /* Initialize the omap3 opp table if not already created. */
+ r = omap3_opp_init();
+ if (IS_ERR_VALUE(r) && (r != -EEXIST)) {
pr_err("%s: opp default init failed\n", __func__);
- return;
+ return r;
}
/* Custom OPP enabled for all xM versions */
if (cpu_is_omap3630()) {
struct device *mpu_dev, *iva_dev;
- mpu_dev = omap_device_get_by_hwmod_name("mpu");
+ mpu_dev = get_cpu_device(0);
iva_dev = omap_device_get_by_hwmod_name("iva");
if (IS_ERR(mpu_dev) || IS_ERR(iva_dev)) {
pr_err("%s: Aiee.. no mpu/dsp devices? %p %p\n",
__func__, mpu_dev, iva_dev);
- return;
+ return -ENODEV;
}
/* Enable MPU 1GHz and lower opps */
r = opp_enable(mpu_dev, 800000000);
@@ -484,8 +492,9 @@
opp_disable(iva_dev, 660000000);
}
}
- return;
+ return 0;
}
+device_initcall(beagle_opp_init);
static void __init omap3_beagle_init(void)
{
@@ -512,8 +521,9 @@
usb_musb_init(NULL);
usbhs_init(&usbhs_bdata);
- omap_nand_flash_init(NAND_BUSWIDTH_16, omap3beagle_nand_partitions,
- ARRAY_SIZE(omap3beagle_nand_partitions));
+ board_nand_init(omap3beagle_nand_partitions,
+ ARRAY_SIZE(omap3beagle_nand_partitions), NAND_CS,
+ NAND_BUSWIDTH_16, NULL);
omap_twl4030_audio_init("omap3beagle");
/* Ensure msecure is mux'd to be able to set the RTC. */
@@ -522,8 +532,6 @@
/* Ensure SDRC pins are mux'd for self-refresh */
omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
-
- beagle_opp_init();
}
MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board")
@@ -537,5 +545,5 @@
.init_machine = omap3_beagle_init,
.init_late = omap3_init_late,
.timer = &omap3_secure_timer,
- .restart = omap_prcm_restart,
+ .restart = omap3xxx_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index b9b776b..54647d6 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -32,6 +32,7 @@
#include <linux/spi/ads7846.h>
#include <linux/i2c/twl.h>
#include <linux/usb/otg.h>
+#include <linux/usb/musb.h>
#include <linux/usb/nop-usb-xceiv.h>
#include <linux/smsc911x.h>
@@ -45,17 +46,20 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <plat/usb.h>
#include <linux/platform_data/mtd-nand-omap2.h>
#include "common.h"
#include <linux/platform_data/spi-omap2-mcspi.h>
#include <video/omapdss.h>
#include <video/omap-panel-tfp410.h>
+#include "soc.h"
#include "mux.h"
#include "sdram-micron-mt46h32m32lf-6.h"
#include "hsmmc.h"
#include "common-board-devices.h"
+#include "board-flash.h"
+
+#define NAND_CS 0
#define OMAP3_EVM_TS_GPIO 175
#define OMAP3_EVM_EHCI_VBUS 22
@@ -731,8 +735,9 @@
}
usb_musb_init(&musb_board_data);
usbhs_init(&usbhs_bdata);
- omap_nand_flash_init(NAND_BUSWIDTH_16, omap3evm_nand_partitions,
- ARRAY_SIZE(omap3evm_nand_partitions));
+ board_nand_init(omap3evm_nand_partitions,
+ ARRAY_SIZE(omap3evm_nand_partitions), NAND_CS,
+ NAND_BUSWIDTH_16, NULL);
omap_ads7846_init(1, OMAP3_EVM_TS_GPIO, 310, NULL);
omap3evm_init_smsc911x();
@@ -752,5 +757,5 @@
.init_machine = omap3_evm_init,
.init_late = omap35xx_init_late,
.timer = &omap3_timer,
- .restart = omap_prcm_restart,
+ .restart = omap3xxx_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c
index 7bd8253..2a065ba 100644
--- a/arch/arm/mach-omap2/board-omap3logic.c
+++ b/arch/arm/mach-omap2/board-omap3logic.c
@@ -34,16 +34,13 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include "gpmc-smsc911x.h"
-#include <plat/gpmc.h>
-#include <plat/sdrc.h>
-#include <plat/usb.h>
-
#include "common.h"
#include "mux.h"
#include "hsmmc.h"
#include "control.h"
#include "common-board-devices.h"
+#include "gpmc.h"
+#include "gpmc-smsc911x.h"
#define OMAP3LOGIC_SMSC911X_CS 1
@@ -235,7 +232,7 @@
.init_machine = omap3logic_init,
.init_late = omap35xx_init_late,
.timer = &omap3_timer,
- .restart = omap_prcm_restart,
+ .restart = omap3xxx_restart,
MACHINE_END
MACHINE_START(OMAP3530_LV_SOM, "OMAP Logic 3530 LV SOM board")
@@ -248,5 +245,5 @@
.init_machine = omap3logic_init,
.init_late = omap35xx_init_late,
.timer = &omap3_timer,
- .restart = omap_prcm_restart,
+ .restart = omap3xxx_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 00a1f4a..a53a668 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -42,7 +42,6 @@
#include <asm/mach/map.h>
#include "common.h"
-#include <plat/usb.h>
#include <video/omapdss.h>
#include <linux/platform_data/mtd-nand-omap2.h>
@@ -50,6 +49,7 @@
#include "sdram-micron-mt46h32m32lf-6.h"
#include "hsmmc.h"
#include "common-board-devices.h"
+#include "gpmc-nand.h"
#define PANDORA_WIFI_IRQ_GPIO 21
#define PANDORA_WIFI_NRESET_GPIO 23
@@ -602,7 +602,7 @@
omap_ads7846_init(1, OMAP3_PANDORA_TS_GPIO, 0, NULL);
usbhs_init(&usbhs_bdata);
usb_musb_init(NULL);
- gpmc_nand_init(&pandora_nand_data);
+ gpmc_nand_init(&pandora_nand_data, NULL);
/* Ensure SDRC pins are mux'd for self-refresh */
omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
@@ -619,5 +619,5 @@
.init_machine = omap3pandora_init,
.init_late = omap35xx_init_late,
.timer = &omap3_timer,
- .restart = omap_prcm_restart,
+ .restart = omap3xxx_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index 731235e..d8638b3 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -40,9 +40,8 @@
#include <asm/mach/flash.h>
#include "common.h"
-#include <plat/gpmc.h>
+#include "gpmc.h"
#include <linux/platform_data/mtd-nand-omap2.h>
-#include <plat/usb.h>
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
#include <video/omap-panel-tfp410.h>
@@ -428,5 +427,5 @@
.init_machine = omap3_stalker_init,
.init_late = omap35xx_init_late,
.timer = &omap3_secure_timer,
- .restart = omap_prcm_restart,
+ .restart = omap3xxx_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index 944ffc4..263cb9c 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -44,12 +44,12 @@
#include <asm/system_info.h>
#include "common.h"
-#include <plat/gpmc.h>
+#include "gpmc.h"
#include <linux/platform_data/mtd-nand-omap2.h>
-#include <plat/usb.h>
#include "mux.h"
#include "hsmmc.h"
+#include "board-flash.h"
#include "common-board-devices.h"
#include <asm/setup.h>
@@ -59,6 +59,8 @@
#define TB_BL_PWM_TIMER 9
#define TB_KILL_POWER_GPIO 168
+#define NAND_CS 0
+
static unsigned long touchbook_revision;
static struct mtd_partition omap3touchbook_nand_partitions[] = {
@@ -365,8 +367,9 @@
omap_ads7846_init(4, OMAP3_TS_GPIO, 310, &ads7846_pdata);
usb_musb_init(NULL);
usbhs_init(&usbhs_bdata);
- omap_nand_flash_init(NAND_BUSWIDTH_16, omap3touchbook_nand_partitions,
- ARRAY_SIZE(omap3touchbook_nand_partitions));
+ board_nand_init(omap3touchbook_nand_partitions,
+ ARRAY_SIZE(omap3touchbook_nand_partitions), NAND_CS,
+ NAND_BUSWIDTH_16, NULL);
/* Ensure SDRC pins are mux'd for self-refresh */
omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
@@ -384,5 +387,5 @@
.init_machine = omap3_touchbook_init,
.init_late = omap3430_init_late,
.timer = &omap3_secure_timer,
- .restart = omap_prcm_restart,
+ .restart = omap3xxx_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index bfcd397..12a3a24 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -29,6 +29,7 @@
#include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>
#include <linux/ti_wilink_st.h>
+#include <linux/usb/musb.h>
#include <linux/wl12xx.h>
#include <linux/platform_data/omap-abe-twl6040.h>
@@ -38,12 +39,11 @@
#include <asm/mach/map.h>
#include <video/omapdss.h>
-#include "common.h"
-#include <plat/usb.h>
-#include <plat/mmc.h>
#include <video/omap-panel-tfp410.h>
+#include "common.h"
#include "soc.h"
+#include "mmc.h"
#include "hsmmc.h"
#include "control.h"
#include "mux.h"
@@ -524,5 +524,5 @@
.init_machine = omap4_panda_init,
.init_late = omap4430_init_late,
.timer = &omap4_timer,
- .restart = omap_prcm_restart,
+ .restart = omap44xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index b700685..c8fde3e 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -45,18 +45,20 @@
#include <asm/mach/flash.h>
#include <asm/mach/map.h>
-#include "common.h"
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
#include <video/omap-panel-tfp410.h>
-#include <plat/gpmc.h>
-#include <plat/usb.h>
+#include "common.h"
#include "mux.h"
#include "sdram-micron-mt46h32m32lf-6.h"
+#include "gpmc.h"
#include "hsmmc.h"
+#include "board-flash.h"
#include "common-board-devices.h"
+#define NAND_CS 0
+
#define OVERO_GPIO_BT_XGATE 15
#define OVERO_GPIO_W2W_NRESET 16
#define OVERO_GPIO_PENDOWN 114
@@ -495,8 +497,8 @@
omap_serial_init();
omap_sdrc_init(mt46h32m32lf6_sdrc_params,
mt46h32m32lf6_sdrc_params);
- omap_nand_flash_init(0, overo_nand_partitions,
- ARRAY_SIZE(overo_nand_partitions));
+ board_nand_init(overo_nand_partitions,
+ ARRAY_SIZE(overo_nand_partitions), NAND_CS, 0, NULL);
usb_musb_init(NULL);
usbhs_init(&usbhs_bdata);
overo_spi_init();
@@ -550,5 +552,5 @@
.init_machine = overo_init,
.init_late = omap35xx_init_late,
.timer = &omap3_timer,
- .restart = omap_prcm_restart,
+ .restart = omap3xxx_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c
index 45997bf..cbcb1b2 100644
--- a/arch/arm/mach-omap2/board-rm680.c
+++ b/arch/arm/mach-omap2/board-rm680.c
@@ -22,17 +22,14 @@
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
-#include <plat/i2c.h>
-#include <plat/mmc.h>
-#include <plat/usb.h>
-#include <plat/gpmc.h>
#include "common.h"
-#include <plat/serial.h>
-
#include "mux.h"
+#include "gpmc.h"
+#include "mmc.h"
#include "hsmmc.h"
#include "sdram-nokia.h"
#include "common-board-devices.h"
+#include "gpmc-onenand.h"
static struct regulator_consumer_supply rm680_vemmc_consumers[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
@@ -151,7 +148,7 @@
.init_machine = rm680_init,
.init_late = omap3630_init_late,
.timer = &omap3_timer,
- .restart = omap_prcm_restart,
+ .restart = omap3xxx_restart,
MACHINE_END
MACHINE_START(NOKIA_RM696, "Nokia RM-696 board")
@@ -164,5 +161,5 @@
.init_machine = rm680_init,
.init_late = omap3630_init_late,
.timer = &omap3_timer,
- .restart = omap_prcm_restart,
+ .restart = omap3xxx_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index 020e03c..07005fe 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -31,9 +31,7 @@
#include <asm/system_info.h>
#include "common.h"
-#include <plat/dma.h>
-#include <plat/gpmc.h>
-#include <plat/omap-pm.h>
+#include <plat-omap/dma-omap.h>
#include "gpmc-smc91x.h"
#include "board-rx51.h"
@@ -52,8 +50,11 @@
#endif
#include "mux.h"
+#include "omap-pm.h"
#include "hsmmc.h"
#include "common-board-devices.h"
+#include "gpmc.h"
+#include "gpmc-onenand.h"
#define SYSTEM_REV_B_USES_VAUX3 0x1699
#define SYSTEM_REV_S_USES_VAUX3 0x8
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index 7bbb05d..bf8f74b 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -17,18 +17,18 @@
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/leds.h>
+#include <linux/usb/musb.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include "common.h"
-#include <plat/dma.h>
-#include <plat/gpmc.h>
-#include <plat/usb.h>
+#include <plat-omap/dma-omap.h>
+#include "common.h"
#include "mux.h"
+#include "gpmc.h"
#include "pm.h"
#include "sdram-nokia.h"
@@ -127,5 +127,5 @@
.init_machine = rx51_init,
.init_late = omap3430_init_late,
.timer = &omap3_timer,
- .restart = omap_prcm_restart,
+ .restart = omap3xxx_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-ti8168evm.c b/arch/arm/mach-omap2/board-ti8168evm.c
index c4f8833..1a3e056 100644
--- a/arch/arm/mach-omap2/board-ti8168evm.c
+++ b/arch/arm/mach-omap2/board-ti8168evm.c
@@ -14,13 +14,14 @@
*/
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/usb/musb.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include "common.h"
-#include <plat/usb.h>
static struct omap_musb_board_data musb_board_data = {
.set_phy_power = ti81xx_musb_phy_power,
@@ -45,7 +46,7 @@
.timer = &omap3_timer,
.init_machine = ti81xx_evm_init,
.init_late = ti81xx_init_late,
- .restart = omap_prcm_restart,
+ .restart = omap44xx_restart,
MACHINE_END
MACHINE_START(TI8148EVM, "ti8148evm")
@@ -57,5 +58,5 @@
.timer = &omap3_timer,
.init_machine = ti81xx_evm_init,
.init_late = ti81xx_init_late,
- .restart = omap_prcm_restart,
+ .restart = omap44xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c
index afb2278..42e5f23 100644
--- a/arch/arm/mach-omap2/board-zoom-debugboard.c
+++ b/arch/arm/mach-omap2/board-zoom-debugboard.c
@@ -17,10 +17,10 @@
#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
-#include <plat/gpmc.h>
+#include "gpmc.h"
#include "gpmc-smsc911x.h"
-#include <mach/board-zoom.h>
+#include "board-zoom.h"
#include "soc.h"
#include "common.h"
diff --git a/arch/arm/mach-omap2/board-zoom-display.c b/arch/arm/mach-omap2/board-zoom-display.c
index b940ab2..1c7c834 100644
--- a/arch/arm/mach-omap2/board-zoom-display.c
+++ b/arch/arm/mach-omap2/board-zoom-display.c
@@ -16,8 +16,9 @@
#include <linux/spi/spi.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
#include <video/omapdss.h>
-#include <mach/board-zoom.h>
+#include "board-zoom.h"
+#include "soc.h"
#include "common.h"
#define LCD_PANEL_RESET_GPIO_PROD 96
diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c
index c166fe1..26e07ad 100644
--- a/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
@@ -26,9 +26,8 @@
#include <asm/mach/map.h>
#include "common.h"
-#include <plat/usb.h>
-#include <mach/board-zoom.h>
+#include "board-zoom.h"
#include "mux.h"
#include "hsmmc.h"
diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c
index 4994438..d7fa31e 100644
--- a/arch/arm/mach-omap2/board-zoom.c
+++ b/arch/arm/mach-omap2/board-zoom.c
@@ -22,9 +22,8 @@
#include <asm/mach/arch.h>
#include "common.h"
-#include <plat/usb.h>
-#include <mach/board-zoom.h>
+#include "board-zoom.h"
#include "board-flash.h"
#include "mux.h"
@@ -113,8 +112,9 @@
usbhs_init(&usbhs_bdata);
}
- board_nand_init(zoom_nand_partitions, ARRAY_SIZE(zoom_nand_partitions),
- ZOOM_NAND_CS, NAND_BUSWIDTH_16);
+ board_nand_init(zoom_nand_partitions,
+ ARRAY_SIZE(zoom_nand_partitions), ZOOM_NAND_CS,
+ NAND_BUSWIDTH_16, nand_default_timings);
zoom_debugboard_init();
zoom_peripherals_init();
@@ -138,7 +138,7 @@
.init_machine = omap_zoom_init,
.init_late = omap3430_init_late,
.timer = &omap3_timer,
- .restart = omap_prcm_restart,
+ .restart = omap3xxx_restart,
MACHINE_END
MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board")
@@ -151,5 +151,5 @@
.init_machine = omap_zoom_init,
.init_late = omap3630_init_late,
.timer = &omap3_timer,
- .restart = omap_prcm_restart,
+ .restart = omap3xxx_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/include/mach/board-zoom.h b/arch/arm/mach-omap2/board-zoom.h
similarity index 100%
rename from arch/arm/mach-omap2/include/mach/board-zoom.h
rename to arch/arm/mach-omap2/board-zoom.h
diff --git a/arch/arm/mach-omap2/clkt2xxx_apll.c b/arch/arm/mach-omap2/clkt2xxx_apll.c
index c2d1521..8c5b13e 100644
--- a/arch/arm/mach-omap2/clkt2xxx_apll.c
+++ b/arch/arm/mach-omap2/clkt2xxx_apll.c
@@ -21,12 +21,10 @@
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/clock.h>
-#include <plat/prcm.h>
#include "clock.h"
#include "clock2xxx.h"
-#include "cm2xxx_3xxx.h"
+#include "cm2xxx.h"
#include "cm-regbits-24xx.h"
/* CM_CLKEN_PLL.EN_{54,96}M_PLL options (24XX) */
@@ -38,44 +36,16 @@
#define APLLS_CLKIN_13MHZ 2
#define APLLS_CLKIN_12MHZ 3
-void __iomem *cm_idlest_pll;
-
/* Private functions */
-/* Enable an APLL if off */
-static int omap2_clk_apll_enable(struct clk *clk, u32 status_mask)
+static int _apll96_enable(struct clk *clk)
{
- u32 cval, apll_mask;
-
- apll_mask = EN_APLL_LOCKED << clk->enable_bit;
-
- cval = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN);
-
- if ((cval & apll_mask) == apll_mask)
- return 0; /* apll already enabled */
-
- cval &= ~apll_mask;
- cval |= apll_mask;
- omap2_cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN);
-
- omap2_cm_wait_idlest(cm_idlest_pll, status_mask,
- OMAP24XX_CM_IDLEST_VAL, __clk_get_name(clk));
-
- /*
- * REVISIT: Should we return an error code if omap2_wait_clock_ready()
- * fails?
- */
- return 0;
+ return omap2xxx_cm_apll96_enable();
}
-static int omap2_clk_apll96_enable(struct clk *clk)
+static int _apll54_enable(struct clk *clk)
{
- return omap2_clk_apll_enable(clk, OMAP24XX_ST_96M_APLL_MASK);
-}
-
-static int omap2_clk_apll54_enable(struct clk *clk)
-{
- return omap2_clk_apll_enable(clk, OMAP24XX_ST_54M_APLL_MASK);
+ return omap2xxx_cm_apll54_enable();
}
static void _apll96_allow_idle(struct clk *clk)
@@ -98,28 +68,28 @@
omap2xxx_cm_set_apll54_disable_autoidle();
}
-/* Stop APLL */
-static void omap2_clk_apll_disable(struct clk *clk)
+static void _apll96_disable(struct clk *clk)
{
- u32 cval;
+ omap2xxx_cm_apll96_disable();
+}
- cval = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN);
- cval &= ~(EN_APLL_LOCKED << clk->enable_bit);
- omap2_cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN);
+static void _apll54_disable(struct clk *clk)
+{
+ omap2xxx_cm_apll54_disable();
}
/* Public data */
const struct clkops clkops_apll96 = {
- .enable = omap2_clk_apll96_enable,
- .disable = omap2_clk_apll_disable,
+ .enable = _apll96_enable,
+ .disable = _apll96_disable,
.allow_idle = _apll96_allow_idle,
.deny_idle = _apll96_deny_idle,
};
const struct clkops clkops_apll54 = {
- .enable = omap2_clk_apll54_enable,
- .disable = omap2_clk_apll_disable,
+ .enable = _apll54_enable,
+ .disable = _apll54_disable,
.allow_idle = _apll54_allow_idle,
.deny_idle = _apll54_deny_idle,
};
diff --git a/arch/arm/mach-omap2/clkt2xxx_dpll.c b/arch/arm/mach-omap2/clkt2xxx_dpll.c
index 1502a7b..399534c 100644
--- a/arch/arm/mach-omap2/clkt2xxx_dpll.c
+++ b/arch/arm/mach-omap2/clkt2xxx_dpll.c
@@ -14,10 +14,8 @@
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/clock.h>
-
#include "clock.h"
-#include "cm2xxx_3xxx.h"
+#include "cm2xxx.h"
#include "cm-regbits-24xx.h"
/* Private functions */
diff --git a/arch/arm/mach-omap2/clkt2xxx_dpllcore.c b/arch/arm/mach-omap2/clkt2xxx_dpllcore.c
index 4ae4392..825e44c 100644
--- a/arch/arm/mach-omap2/clkt2xxx_dpllcore.c
+++ b/arch/arm/mach-omap2/clkt2xxx_dpllcore.c
@@ -25,21 +25,25 @@
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/clock.h>
-#include <plat/sram.h>
-#include <plat/sdrc.h>
-
#include "clock.h"
#include "clock2xxx.h"
#include "opp2xxx.h"
-#include "cm2xxx_3xxx.h"
+#include "cm2xxx.h"
#include "cm-regbits-24xx.h"
+#include "sdrc.h"
+#include "sram.h"
/* #define DOWN_VARIABLE_DPLL 1 */ /* Experimental */
+/*
+ * dpll_core_ck: pointer to the combined dpll_ck + core_ck on OMAP2xxx
+ * (currently defined as "dpll_ck" in the OMAP2xxx clock tree). Set
+ * during dpll_ck init and used later by omap2xxx_clk_get_core_rate().
+ */
+static struct clk *dpll_core_ck;
+
/**
* omap2xxx_clk_get_core_rate - return the CORE_CLK rate
- * @clk: pointer to the combined dpll_ck + core_ck (currently "dpll_ck")
*
* Returns the CORE_CLK rate. CORE_CLK can have one of three rate
* sources on OMAP2xxx: the DPLL CLKOUT rate, DPLL CLKOUTX2, or 32KHz
@@ -47,12 +51,14 @@
* struct clk *dpll_ck, which is a composite clock of dpll_ck and
* core_ck.
*/
-unsigned long omap2xxx_clk_get_core_rate(struct clk *clk)
+unsigned long omap2xxx_clk_get_core_rate(void)
{
long long core_clk;
u32 v;
- core_clk = omap2_get_dpll_rate(clk);
+ WARN_ON(!dpll_core_ck);
+
+ core_clk = omap2_get_dpll_rate(dpll_core_ck);
v = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
v &= OMAP24XX_CORE_CLK_SRC_MASK;
@@ -100,7 +106,7 @@
unsigned long omap2_dpllcore_recalc(struct clk *clk)
{
- return omap2xxx_clk_get_core_rate(clk);
+ return omap2xxx_clk_get_core_rate();
}
int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate)
@@ -110,7 +116,7 @@
struct prcm_config tmpset;
const struct dpll_data *dd;
- cur_rate = omap2xxx_clk_get_core_rate(dclk);
+ cur_rate = omap2xxx_clk_get_core_rate();
mult = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
mult &= OMAP24XX_CORE_CLK_SRC_MASK;
@@ -171,3 +177,19 @@
return 0;
}
+/**
+ * omap2xxx_clkt_dpllcore_init - clk init function for dpll_ck
+ * @clk: struct clk *dpll_ck
+ *
+ * Store a local copy of @clk in dpll_core_ck so other code can query
+ * the core rate without having to clk_get(), which can sleep. Must
+ * only be called once. No return value. XXX If the clock
+ * registration process is ever changed such that dpll_ck is no longer
+ * statically defined, this code may need to change to increment some
+ * kind of use count on dpll_ck.
+ */
+void omap2xxx_clkt_dpllcore_init(struct clk *clk)
+{
+ WARN(dpll_core_ck, "dpll_core_ck already set - should never happen");
+ dpll_core_ck = clk;
+}
diff --git a/arch/arm/mach-omap2/clkt2xxx_osc.c b/arch/arm/mach-omap2/clkt2xxx_osc.c
index c346092..e177737 100644
--- a/arch/arm/mach-omap2/clkt2xxx_osc.c
+++ b/arch/arm/mach-omap2/clkt2xxx_osc.c
@@ -23,8 +23,6 @@
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/clock.h>
-
#include "clock.h"
#include "clock2xxx.h"
#include "prm2xxx_3xxx.h"
diff --git a/arch/arm/mach-omap2/clkt2xxx_sys.c b/arch/arm/mach-omap2/clkt2xxx_sys.c
index 8693cfd..46683b3 100644
--- a/arch/arm/mach-omap2/clkt2xxx_sys.c
+++ b/arch/arm/mach-omap2/clkt2xxx_sys.c
@@ -22,8 +22,6 @@
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/clock.h>
-
#include "clock.h"
#include "clock2xxx.h"
#include "prm2xxx_3xxx.h"
diff --git a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
index 3524f0e7..1c2041f 100644
--- a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
+++ b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
@@ -1,7 +1,7 @@
/*
* OMAP2xxx DVFS virtual clock functions
*
- * Copyright (C) 2005-2008 Texas Instruments, Inc.
+ * Copyright (C) 2005-2008, 2012 Texas Instruments, Inc.
* Copyright (C) 2004-2010 Nokia Corporation
*
* Contacts:
@@ -33,20 +33,25 @@
#include <linux/cpufreq.h>
#include <linux/slab.h>
-#include <plat/clock.h>
-#include <plat/sram.h>
-#include <plat/sdrc.h>
-
#include "soc.h"
#include "clock.h"
#include "clock2xxx.h"
#include "opp2xxx.h"
-#include "cm2xxx_3xxx.h"
+#include "cm2xxx.h"
#include "cm-regbits-24xx.h"
+#include "sdrc.h"
+#include "sram.h"
const struct prcm_config *curr_prcm_set;
const struct prcm_config *rate_table;
+/*
+ * sys_ck_rate: the rate of the external high-frequency clock
+ * oscillator on the board. Set by the SoC-specific clock init code.
+ * Once set during a boot, will not change.
+ */
+static unsigned long sys_ck_rate;
+
/**
* omap2_table_mpu_recalc - just return the MPU speed
* @clk: virt_prcm_set struct clk
@@ -68,15 +73,14 @@
long omap2_round_to_table_rate(struct clk *clk, unsigned long rate)
{
const struct prcm_config *ptr;
- long highest_rate, sys_clk_rate;
+ long highest_rate;
highest_rate = -EINVAL;
- sys_clk_rate = __clk_get_rate(sclk);
for (ptr = rate_table; ptr->mpu_speed; ptr++) {
if (!(ptr->flags & cpu_mask))
continue;
- if (ptr->xtal_speed != sys_clk_rate)
+ if (ptr->xtal_speed != sys_ck_rate)
continue;
highest_rate = ptr->mpu_speed;
@@ -95,15 +99,12 @@
const struct prcm_config *prcm;
unsigned long found_speed = 0;
unsigned long flags;
- long sys_clk_rate;
-
- sys_clk_rate = __clk_get_rate(sclk);
for (prcm = rate_table; prcm->mpu_speed; prcm++) {
if (!(prcm->flags & cpu_mask))
continue;
- if (prcm->xtal_speed != sys_clk_rate)
+ if (prcm->xtal_speed != sys_ck_rate)
continue;
if (prcm->mpu_speed <= rate) {
@@ -119,7 +120,7 @@
}
curr_prcm_set = prcm;
- cur_rate = omap2xxx_clk_get_core_rate(dclk);
+ cur_rate = omap2xxx_clk_get_core_rate();
if (prcm->dpll_speed == cur_rate / 2) {
omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1);
@@ -169,3 +170,50 @@
return 0;
}
+
+/**
+ * omap2xxx_clkt_vps_check_bootloader_rate - determine which of the rate
+ * table sets matches the current CORE DPLL hardware rate
+ *
+ * Check the MPU rate set by bootloader. Sets the 'curr_prcm_set'
+ * global to point to the active rate set when found; otherwise, sets
+ * it to NULL. No return value;
+ */
+void omap2xxx_clkt_vps_check_bootloader_rates(void)
+{
+ const struct prcm_config *prcm = NULL;
+ unsigned long rate;
+
+ rate = omap2xxx_clk_get_core_rate();
+ for (prcm = rate_table; prcm->mpu_speed; prcm++) {
+ if (!(prcm->flags & cpu_mask))
+ continue;
+ if (prcm->xtal_speed != sys_ck_rate)
+ continue;
+ if (prcm->dpll_speed <= rate)
+ break;
+ }
+ curr_prcm_set = prcm;
+}
+
+/**
+ * omap2xxx_clkt_vps_late_init - store a copy of the sys_ck rate
+ *
+ * Store a copy of the sys_ck rate for later use by the OMAP2xxx DVFS
+ * code. (The sys_ck rate does not -- or rather, must not -- change
+ * during kernel runtime.) Must be called after we have a valid
+ * sys_ck rate, but before the virt_prcm_set clock rate is
+ * recalculated. No return value.
+ */
+void omap2xxx_clkt_vps_late_init(void)
+{
+ struct clk *c;
+
+ c = clk_get(NULL, "sys_ck");
+ if (IS_ERR(c)) {
+ WARN(1, "could not locate sys_ck\n");
+ } else {
+ sys_ck_rate = clk_get_rate(c);
+ clk_put(c);
+ }
+}
diff --git a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
index 7c6da2f..6cf298e 100644
--- a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
+++ b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
@@ -21,14 +21,11 @@
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/clock.h>
-#include <plat/sram.h>
-#include <plat/sdrc.h>
-
#include "clock.h"
#include "clock3xxx.h"
#include "clock34xx.h"
#include "sdrc.h"
+#include "sram.h"
#define CYCLES_PER_MHZ 1000000
diff --git a/arch/arm/mach-omap2/clkt_clksel.c b/arch/arm/mach-omap2/clkt_clksel.c
index 3ff22114d..53646fa 100644
--- a/arch/arm/mach-omap2/clkt_clksel.c
+++ b/arch/arm/mach-omap2/clkt_clksel.c
@@ -45,8 +45,6 @@
#include <linux/io.h>
#include <linux/bug.h>
-#include <plat/clock.h>
-
#include "clock.h"
/* Private functions */
diff --git a/arch/arm/mach-omap2/clkt_dpll.c b/arch/arm/mach-omap2/clkt_dpll.c
index 8041114..8463cc3 100644
--- a/arch/arm/mach-omap2/clkt_dpll.c
+++ b/arch/arm/mach-omap2/clkt_dpll.c
@@ -21,8 +21,6 @@
#include <asm/div64.h>
-#include <plat/clock.h>
-
#include "soc.h"
#include "clock.h"
#include "cm-regbits-24xx.h"
diff --git a/arch/arm/mach-omap2/clkt_iclk.c b/arch/arm/mach-omap2/clkt_iclk.c
index 3d43fba..fe774a0 100644
--- a/arch/arm/mach-omap2/clkt_iclk.c
+++ b/arch/arm/mach-omap2/clkt_iclk.c
@@ -14,8 +14,6 @@
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/clock.h>
-#include <plat/prcm.h>
#include "clock.h"
#include "clock2xxx.h"
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 961ac8f..e381d991 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -15,6 +15,7 @@
#undef DEBUG
#include <linux/kernel.h>
+#include <linux/export.h>
#include <linux/list.h>
#include <linux/errno.h>
#include <linux/err.h>
@@ -25,17 +26,24 @@
#include <asm/cpu.h>
-#include <plat/clock.h>
-#include <plat/prcm.h>
#include <trace/events/power.h>
#include "soc.h"
#include "clockdomain.h"
#include "clock.h"
-#include "cm2xxx_3xxx.h"
+#include "cm.h"
+#include "cm2xxx.h"
+#include "cm3xxx.h"
#include "cm-regbits-24xx.h"
#include "cm-regbits-34xx.h"
+#include "common.h"
+
+/*
+ * MAX_MODULE_ENABLE_WAIT: maximum of number of microseconds to wait
+ * for a module to indicate that it is no longer in idle
+ */
+#define MAX_MODULE_ENABLE_WAIT 100000
u16 cpu_mask;
@@ -47,12 +55,50 @@
*/
static bool clkdm_control = true;
+static LIST_HEAD(clocks);
+static DEFINE_MUTEX(clocks_mutex);
+static DEFINE_SPINLOCK(clockfw_lock);
+
/*
* OMAP2+ specific clock functions
*/
/* Private functions */
+
+/**
+ * _wait_idlest_generic - wait for a module to leave the idle state
+ * @reg: virtual address of module IDLEST register
+ * @mask: value to mask against to determine if the module is active
+ * @idlest: idle state indicator (0 or 1) for the clock
+ * @name: name of the clock (for printk)
+ *
+ * Wait for a module to leave idle, where its idle-status register is
+ * not inside the CM module. Returns 1 if the module left idle
+ * promptly, or 0 if the module did not leave idle before the timeout
+ * elapsed. XXX Deprecated - should be moved into drivers for the
+ * individual IP block that the IDLEST register exists in.
+ */
+static int _wait_idlest_generic(void __iomem *reg, u32 mask, u8 idlest,
+ const char *name)
+{
+ int i = 0, ena = 0;
+
+ ena = (idlest) ? 0 : mask;
+
+ omap_test_timeout(((__raw_readl(reg) & mask) == ena),
+ MAX_MODULE_ENABLE_WAIT, i);
+
+ if (i < MAX_MODULE_ENABLE_WAIT)
+ pr_debug("omap clock: module associated with clock %s ready after %d loops\n",
+ name, i);
+ else
+ pr_err("omap clock: module associated with clock %s didn't enable in %d tries\n",
+ name, MAX_MODULE_ENABLE_WAIT);
+
+ return (i < MAX_MODULE_ENABLE_WAIT) ? 1 : 0;
+};
+
/**
* _omap2_module_wait_ready - wait for an OMAP module to leave IDLE
* @clk: struct clk * belonging to the module
@@ -66,7 +112,9 @@
static void _omap2_module_wait_ready(struct clk *clk)
{
void __iomem *companion_reg, *idlest_reg;
- u8 other_bit, idlest_bit, idlest_val;
+ u8 other_bit, idlest_bit, idlest_val, idlest_reg_id;
+ s16 prcm_mod;
+ int r;
/* Not all modules have multiple clocks that their IDLEST depends on */
if (clk->ops->find_companion) {
@@ -77,8 +125,14 @@
clk->ops->find_idlest(clk, &idlest_reg, &idlest_bit, &idlest_val);
- omap2_cm_wait_idlest(idlest_reg, (1 << idlest_bit), idlest_val,
- __clk_get_name(clk));
+ r = cm_split_idlest_reg(idlest_reg, &prcm_mod, &idlest_reg_id);
+ if (r) {
+ /* IDLEST register not in the CM module */
+ _wait_idlest_generic(idlest_reg, (1 << idlest_bit), idlest_val,
+ clk->name);
+ } else {
+ cm_wait_module_ready(prcm_mod, idlest_reg_id, idlest_bit);
+ };
}
/* Public functions */
@@ -512,12 +566,510 @@
/* Common data */
-struct clk_functions omap2_clk_functions = {
- .clk_enable = omap2_clk_enable,
- .clk_disable = omap2_clk_disable,
- .clk_round_rate = omap2_clk_round_rate,
- .clk_set_rate = omap2_clk_set_rate,
- .clk_set_parent = omap2_clk_set_parent,
- .clk_disable_unused = omap2_clk_disable_unused,
+int clk_enable(struct clk *clk)
+{
+ unsigned long flags;
+ int ret;
+
+ if (clk == NULL || IS_ERR(clk))
+ return -EINVAL;
+
+ spin_lock_irqsave(&clockfw_lock, flags);
+ ret = omap2_clk_enable(clk);
+ spin_unlock_irqrestore(&clockfw_lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+ unsigned long flags;
+
+ if (clk == NULL || IS_ERR(clk))
+ return;
+
+ spin_lock_irqsave(&clockfw_lock, flags);
+ if (clk->usecount == 0) {
+ pr_err("Trying disable clock %s with 0 usecount\n",
+ clk->name);
+ WARN_ON(1);
+ goto out;
+ }
+
+ omap2_clk_disable(clk);
+
+out:
+ spin_unlock_irqrestore(&clockfw_lock, flags);
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+ unsigned long flags;
+ unsigned long ret;
+
+ if (clk == NULL || IS_ERR(clk))
+ return 0;
+
+ spin_lock_irqsave(&clockfw_lock, flags);
+ ret = clk->rate;
+ spin_unlock_irqrestore(&clockfw_lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+/*
+ * Optional clock functions defined in include/linux/clk.h
+ */
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+ unsigned long flags;
+ long ret;
+
+ if (clk == NULL || IS_ERR(clk))
+ return 0;
+
+ spin_lock_irqsave(&clockfw_lock, flags);
+ ret = omap2_clk_round_rate(clk, rate);
+ spin_unlock_irqrestore(&clockfw_lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ unsigned long flags;
+ int ret = -EINVAL;
+
+ if (clk == NULL || IS_ERR(clk))
+ return ret;
+
+ spin_lock_irqsave(&clockfw_lock, flags);
+ ret = omap2_clk_set_rate(clk, rate);
+ if (ret == 0)
+ propagate_rate(clk);
+ spin_unlock_irqrestore(&clockfw_lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+ unsigned long flags;
+ int ret = -EINVAL;
+
+ if (clk == NULL || IS_ERR(clk) || parent == NULL || IS_ERR(parent))
+ return ret;
+
+ spin_lock_irqsave(&clockfw_lock, flags);
+ if (clk->usecount == 0) {
+ ret = omap2_clk_set_parent(clk, parent);
+ if (ret == 0)
+ propagate_rate(clk);
+ } else {
+ ret = -EBUSY;
+ }
+ spin_unlock_irqrestore(&clockfw_lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL(clk_set_parent);
+
+struct clk *clk_get_parent(struct clk *clk)
+{
+ return clk->parent;
+}
+EXPORT_SYMBOL(clk_get_parent);
+
+/*
+ * OMAP specific clock functions shared between omap1 and omap2
+ */
+
+int __initdata mpurate;
+
+/*
+ * By default we use the rate set by the bootloader.
+ * You can override this with mpurate= cmdline option.
+ */
+static int __init omap_clk_setup(char *str)
+{
+ get_option(&str, &mpurate);
+
+ if (!mpurate)
+ return 1;
+
+ if (mpurate < 1000)
+ mpurate *= 1000000;
+
+ return 1;
+}
+__setup("mpurate=", omap_clk_setup);
+
+/* Used for clocks that always have same value as the parent clock */
+unsigned long followparent_recalc(struct clk *clk)
+{
+ return clk->parent->rate;
+}
+
+/*
+ * Used for clocks that have the same value as the parent clock,
+ * divided by some factor
+ */
+unsigned long omap_fixed_divisor_recalc(struct clk *clk)
+{
+ WARN_ON(!clk->fixed_div);
+
+ return clk->parent->rate / clk->fixed_div;
+}
+
+void clk_reparent(struct clk *child, struct clk *parent)
+{
+ list_del_init(&child->sibling);
+ if (parent)
+ list_add(&child->sibling, &parent->children);
+ child->parent = parent;
+
+ /* now do the debugfs renaming to reattach the child
+ to the proper parent */
+}
+
+/* Propagate rate to children */
+void propagate_rate(struct clk *tclk)
+{
+ struct clk *clkp;
+
+ list_for_each_entry(clkp, &tclk->children, sibling) {
+ if (clkp->recalc)
+ clkp->rate = clkp->recalc(clkp);
+ propagate_rate(clkp);
+ }
+}
+
+static LIST_HEAD(root_clks);
+
+/**
+ * recalculate_root_clocks - recalculate and propagate all root clocks
+ *
+ * Recalculates all root clocks (clocks with no parent), which if the
+ * clock's .recalc is set correctly, should also propagate their rates.
+ * Called at init.
+ */
+void recalculate_root_clocks(void)
+{
+ struct clk *clkp;
+
+ list_for_each_entry(clkp, &root_clks, sibling) {
+ if (clkp->recalc)
+ clkp->rate = clkp->recalc(clkp);
+ propagate_rate(clkp);
+ }
+}
+
+/**
+ * clk_preinit - initialize any fields in the struct clk before clk init
+ * @clk: struct clk * to initialize
+ *
+ * Initialize any struct clk fields needed before normal clk initialization
+ * can run. No return value.
+ */
+void clk_preinit(struct clk *clk)
+{
+ INIT_LIST_HEAD(&clk->children);
+}
+
+int clk_register(struct clk *clk)
+{
+ if (clk == NULL || IS_ERR(clk))
+ return -EINVAL;
+
+ /*
+ * trap out already registered clocks
+ */
+ if (clk->node.next || clk->node.prev)
+ return 0;
+
+ mutex_lock(&clocks_mutex);
+ if (clk->parent)
+ list_add(&clk->sibling, &clk->parent->children);
+ else
+ list_add(&clk->sibling, &root_clks);
+
+ list_add(&clk->node, &clocks);
+ if (clk->init)
+ clk->init(clk);
+ mutex_unlock(&clocks_mutex);
+
+ return 0;
+}
+EXPORT_SYMBOL(clk_register);
+
+void clk_unregister(struct clk *clk)
+{
+ if (clk == NULL || IS_ERR(clk))
+ return;
+
+ mutex_lock(&clocks_mutex);
+ list_del(&clk->sibling);
+ list_del(&clk->node);
+ mutex_unlock(&clocks_mutex);
+}
+EXPORT_SYMBOL(clk_unregister);
+
+void clk_enable_init_clocks(void)
+{
+ struct clk *clkp;
+
+ list_for_each_entry(clkp, &clocks, node)
+ if (clkp->flags & ENABLE_ON_INIT)
+ clk_enable(clkp);
+}
+
+/**
+ * omap_clk_get_by_name - locate OMAP struct clk by its name
+ * @name: name of the struct clk to locate
+ *
+ * Locate an OMAP struct clk by its name. Assumes that struct clk
+ * names are unique. Returns NULL if not found or a pointer to the
+ * struct clk if found.
+ */
+struct clk *omap_clk_get_by_name(const char *name)
+{
+ struct clk *c;
+ struct clk *ret = NULL;
+
+ mutex_lock(&clocks_mutex);
+
+ list_for_each_entry(c, &clocks, node) {
+ if (!strcmp(c->name, name)) {
+ ret = c;
+ break;
+ }
+ }
+
+ mutex_unlock(&clocks_mutex);
+
+ return ret;
+}
+
+int omap_clk_enable_autoidle_all(void)
+{
+ struct clk *c;
+ unsigned long flags;
+
+ spin_lock_irqsave(&clockfw_lock, flags);
+
+ list_for_each_entry(c, &clocks, node)
+ if (c->ops->allow_idle)
+ c->ops->allow_idle(c);
+
+ spin_unlock_irqrestore(&clockfw_lock, flags);
+
+ return 0;
+}
+
+int omap_clk_disable_autoidle_all(void)
+{
+ struct clk *c;
+ unsigned long flags;
+
+ spin_lock_irqsave(&clockfw_lock, flags);
+
+ list_for_each_entry(c, &clocks, node)
+ if (c->ops->deny_idle)
+ c->ops->deny_idle(c);
+
+ spin_unlock_irqrestore(&clockfw_lock, flags);
+
+ return 0;
+}
+
+/*
+ * Low level helpers
+ */
+static int clkll_enable_null(struct clk *clk)
+{
+ return 0;
+}
+
+static void clkll_disable_null(struct clk *clk)
+{
+}
+
+const struct clkops clkops_null = {
+ .enable = clkll_enable_null,
+ .disable = clkll_disable_null,
};
+/*
+ * Dummy clock
+ *
+ * Used for clock aliases that are needed on some OMAPs, but not others
+ */
+struct clk dummy_ck = {
+ .name = "dummy",
+ .ops = &clkops_null,
+};
+
+/*
+ *
+ */
+
+#ifdef CONFIG_OMAP_RESET_CLOCKS
+/*
+ * Disable any unused clocks left on by the bootloader
+ */
+static int __init clk_disable_unused(void)
+{
+ struct clk *ck;
+ unsigned long flags;
+
+ pr_info("clock: disabling unused clocks to save power\n");
+
+ spin_lock_irqsave(&clockfw_lock, flags);
+ list_for_each_entry(ck, &clocks, node) {
+ if (ck->ops == &clkops_null)
+ continue;
+
+ if (ck->usecount > 0 || !ck->enable_reg)
+ continue;
+
+ omap2_clk_disable_unused(ck);
+ }
+ spin_unlock_irqrestore(&clockfw_lock, flags);
+
+ return 0;
+}
+late_initcall(clk_disable_unused);
+late_initcall(omap_clk_enable_autoidle_all);
+#endif
+
+#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
+/*
+ * debugfs support to trace clock tree hierarchy and attributes
+ */
+
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+
+static struct dentry *clk_debugfs_root;
+
+static int clk_dbg_show_summary(struct seq_file *s, void *unused)
+{
+ struct clk *c;
+ struct clk *pa;
+
+ mutex_lock(&clocks_mutex);
+ seq_printf(s, "%-30s %-30s %-10s %s\n",
+ "clock-name", "parent-name", "rate", "use-count");
+
+ list_for_each_entry(c, &clocks, node) {
+ pa = c->parent;
+ seq_printf(s, "%-30s %-30s %-10lu %d\n",
+ c->name, pa ? pa->name : "none", c->rate,
+ c->usecount);
+ }
+ mutex_unlock(&clocks_mutex);
+
+ return 0;
+}
+
+static int clk_dbg_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, clk_dbg_show_summary, inode->i_private);
+}
+
+static const struct file_operations debug_clock_fops = {
+ .open = clk_dbg_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static int clk_debugfs_register_one(struct clk *c)
+{
+ int err;
+ struct dentry *d;
+ struct clk *pa = c->parent;
+
+ d = debugfs_create_dir(c->name, pa ? pa->dent : clk_debugfs_root);
+ if (!d)
+ return -ENOMEM;
+ c->dent = d;
+
+ d = debugfs_create_u8("usecount", S_IRUGO, c->dent, (u8 *)&c->usecount);
+ if (!d) {
+ err = -ENOMEM;
+ goto err_out;
+ }
+ d = debugfs_create_u32("rate", S_IRUGO, c->dent, (u32 *)&c->rate);
+ if (!d) {
+ err = -ENOMEM;
+ goto err_out;
+ }
+ d = debugfs_create_x32("flags", S_IRUGO, c->dent, (u32 *)&c->flags);
+ if (!d) {
+ err = -ENOMEM;
+ goto err_out;
+ }
+ return 0;
+
+err_out:
+ debugfs_remove_recursive(c->dent);
+ return err;
+}
+
+static int clk_debugfs_register(struct clk *c)
+{
+ int err;
+ struct clk *pa = c->parent;
+
+ if (pa && !pa->dent) {
+ err = clk_debugfs_register(pa);
+ if (err)
+ return err;
+ }
+
+ if (!c->dent) {
+ err = clk_debugfs_register_one(c);
+ if (err)
+ return err;
+ }
+ return 0;
+}
+
+static int __init clk_debugfs_init(void)
+{
+ struct clk *c;
+ struct dentry *d;
+ int err;
+
+ d = debugfs_create_dir("clock", NULL);
+ if (!d)
+ return -ENOMEM;
+ clk_debugfs_root = d;
+
+ list_for_each_entry(c, &clocks, node) {
+ err = clk_debugfs_register(c);
+ if (err)
+ goto err_out;
+ }
+
+ d = debugfs_create_file("summary", S_IRUGO,
+ d, NULL, &debug_clock_fops);
+ if (!d)
+ return -ENOMEM;
+
+ return 0;
+err_out:
+ debugfs_remove_recursive(clk_debugfs_root);
+ return err;
+}
+late_initcall(clk_debugfs_init);
+
+#endif /* defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) */
+
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 35ec5f3..ff9789b 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -17,8 +17,323 @@
#define __ARCH_ARM_MACH_OMAP2_CLOCK_H
#include <linux/kernel.h>
+#include <linux/list.h>
-#include <plat/clock.h>
+#include <linux/clkdev.h>
+
+struct omap_clk {
+ u16 cpu;
+ struct clk_lookup lk;
+};
+
+#define CLK(dev, con, ck, cp) \
+ { \
+ .cpu = cp, \
+ .lk = { \
+ .dev_id = dev, \
+ .con_id = con, \
+ .clk = ck, \
+ }, \
+ }
+
+/* Platform flags for the clkdev-OMAP integration code */
+#define CK_242X (1 << 0)
+#define CK_243X (1 << 1) /* 243x, 253x */
+#define CK_3430ES1 (1 << 2) /* 34xxES1 only */
+#define CK_3430ES2PLUS (1 << 3) /* 34xxES2, ES3, non-Sitara 35xx only */
+#define CK_AM35XX (1 << 4) /* Sitara AM35xx */
+#define CK_36XX (1 << 5) /* 36xx/37xx-specific clocks */
+#define CK_443X (1 << 6)
+#define CK_TI816X (1 << 7)
+#define CK_446X (1 << 8)
+#define CK_AM33XX (1 << 9) /* AM33xx specific clocks */
+
+
+#define CK_34XX (CK_3430ES1 | CK_3430ES2PLUS)
+#define CK_3XXX (CK_34XX | CK_AM35XX | CK_36XX)
+
+struct module;
+struct clk;
+struct clockdomain;
+
+/* Temporary, needed during the common clock framework conversion */
+#define __clk_get_name(clk) (clk->name)
+#define __clk_get_parent(clk) (clk->parent)
+#define __clk_get_rate(clk) (clk->rate)
+
+/**
+ * struct clkops - some clock function pointers
+ * @enable: fn ptr that enables the current clock in hardware
+ * @disable: fn ptr that enables the current clock in hardware
+ * @find_idlest: function returning the IDLEST register for the clock's IP blk
+ * @find_companion: function returning the "companion" clk reg for the clock
+ * @allow_idle: fn ptr that enables autoidle for the current clock in hardware
+ * @deny_idle: fn ptr that disables autoidle for the current clock in hardware
+ *
+ * A "companion" clk is an accompanying clock to the one being queried
+ * that must be enabled for the IP module connected to the clock to
+ * become accessible by the hardware. Neither @find_idlest nor
+ * @find_companion should be needed; that information is IP
+ * block-specific; the hwmod code has been created to handle this, but
+ * until hwmod data is ready and drivers have been converted to use PM
+ * runtime calls in place of clk_enable()/clk_disable(), @find_idlest and
+ * @find_companion must, unfortunately, remain.
+ */
+struct clkops {
+ int (*enable)(struct clk *);
+ void (*disable)(struct clk *);
+ void (*find_idlest)(struct clk *, void __iomem **,
+ u8 *, u8 *);
+ void (*find_companion)(struct clk *, void __iomem **,
+ u8 *);
+ void (*allow_idle)(struct clk *);
+ void (*deny_idle)(struct clk *);
+};
+
+/* struct clksel_rate.flags possibilities */
+#define RATE_IN_242X (1 << 0)
+#define RATE_IN_243X (1 << 1)
+#define RATE_IN_3430ES1 (1 << 2) /* 3430ES1 rates only */
+#define RATE_IN_3430ES2PLUS (1 << 3) /* 3430 ES >= 2 rates only */
+#define RATE_IN_36XX (1 << 4)
+#define RATE_IN_4430 (1 << 5)
+#define RATE_IN_TI816X (1 << 6)
+#define RATE_IN_4460 (1 << 7)
+#define RATE_IN_AM33XX (1 << 8)
+#define RATE_IN_TI814X (1 << 9)
+
+#define RATE_IN_24XX (RATE_IN_242X | RATE_IN_243X)
+#define RATE_IN_34XX (RATE_IN_3430ES1 | RATE_IN_3430ES2PLUS)
+#define RATE_IN_3XXX (RATE_IN_34XX | RATE_IN_36XX)
+#define RATE_IN_44XX (RATE_IN_4430 | RATE_IN_4460)
+
+/* RATE_IN_3430ES2PLUS_36XX includes 34xx/35xx with ES >=2, and all 36xx/37xx */
+#define RATE_IN_3430ES2PLUS_36XX (RATE_IN_3430ES2PLUS | RATE_IN_36XX)
+
+
+/**
+ * struct clksel_rate - register bitfield values corresponding to clk divisors
+ * @val: register bitfield value (shifted to bit 0)
+ * @div: clock divisor corresponding to @val
+ * @flags: (see "struct clksel_rate.flags possibilities" above)
+ *
+ * @val should match the value of a read from struct clk.clksel_reg
+ * AND'ed with struct clk.clksel_mask, shifted right to bit 0.
+ *
+ * @div is the divisor that should be applied to the parent clock's rate
+ * to produce the current clock's rate.
+ */
+struct clksel_rate {
+ u32 val;
+ u8 div;
+ u16 flags;
+};
+
+/**
+ * struct clksel - available parent clocks, and a pointer to their divisors
+ * @parent: struct clk * to a possible parent clock
+ * @rates: available divisors for this parent clock
+ *
+ * A struct clksel is always associated with one or more struct clks
+ * and one or more struct clksel_rates.
+ */
+struct clksel {
+ struct clk *parent;
+ const struct clksel_rate *rates;
+};
+
+/**
+ * struct dpll_data - DPLL registers and integration data
+ * @mult_div1_reg: register containing the DPLL M and N bitfields
+ * @mult_mask: mask of the DPLL M bitfield in @mult_div1_reg
+ * @div1_mask: mask of the DPLL N bitfield in @mult_div1_reg
+ * @clk_bypass: struct clk pointer to the clock's bypass clock input
+ * @clk_ref: struct clk pointer to the clock's reference clock input
+ * @control_reg: register containing the DPLL mode bitfield
+ * @enable_mask: mask of the DPLL mode bitfield in @control_reg
+ * @last_rounded_rate: cache of the last rate result of omap2_dpll_round_rate()
+ * @last_rounded_m: cache of the last M result of omap2_dpll_round_rate()
+ * @max_multiplier: maximum valid non-bypass multiplier value (actual)
+ * @last_rounded_n: cache of the last N result of omap2_dpll_round_rate()
+ * @min_divider: minimum valid non-bypass divider value (actual)
+ * @max_divider: maximum valid non-bypass divider value (actual)
+ * @modes: possible values of @enable_mask
+ * @autoidle_reg: register containing the DPLL autoidle mode bitfield
+ * @idlest_reg: register containing the DPLL idle status bitfield
+ * @autoidle_mask: mask of the DPLL autoidle mode bitfield in @autoidle_reg
+ * @freqsel_mask: mask of the DPLL jitter correction bitfield in @control_reg
+ * @idlest_mask: mask of the DPLL idle status bitfield in @idlest_reg
+ * @auto_recal_bit: bitshift of the driftguard enable bit in @control_reg
+ * @recal_en_bit: bitshift of the PRM_IRQENABLE_* bit for recalibration IRQs
+ * @recal_st_bit: bitshift of the PRM_IRQSTATUS_* bit for recalibration IRQs
+ * @flags: DPLL type/features (see below)
+ *
+ * Possible values for @flags:
+ * DPLL_J_TYPE: "J-type DPLL" (only some 36xx, 4xxx DPLLs)
+ *
+ * @freqsel_mask is only used on the OMAP34xx family and AM35xx.
+ *
+ * XXX Some DPLLs have multiple bypass inputs, so it's not technically
+ * correct to only have one @clk_bypass pointer.
+ *
+ * XXX The runtime-variable fields (@last_rounded_rate, @last_rounded_m,
+ * @last_rounded_n) should be separated from the runtime-fixed fields
+ * and placed into a different structure, so that the runtime-fixed data
+ * can be placed into read-only space.
+ */
+struct dpll_data {
+ void __iomem *mult_div1_reg;
+ u32 mult_mask;
+ u32 div1_mask;
+ struct clk *clk_bypass;
+ struct clk *clk_ref;
+ void __iomem *control_reg;
+ u32 enable_mask;
+ unsigned long last_rounded_rate;
+ u16 last_rounded_m;
+ u16 max_multiplier;
+ u8 last_rounded_n;
+ u8 min_divider;
+ u16 max_divider;
+ u8 modes;
+ void __iomem *autoidle_reg;
+ void __iomem *idlest_reg;
+ u32 autoidle_mask;
+ u32 freqsel_mask;
+ u32 idlest_mask;
+ u32 dco_mask;
+ u32 sddiv_mask;
+ u8 auto_recal_bit;
+ u8 recal_en_bit;
+ u8 recal_st_bit;
+ u8 flags;
+};
+
+/*
+ * struct clk.flags possibilities
+ *
+ * XXX document the rest of the clock flags here
+ *
+ * CLOCK_CLKOUTX2: (OMAP4 only) DPLL CLKOUT and CLKOUTX2 GATE_CTRL
+ * bits share the same register. This flag allows the
+ * omap4_dpllmx*() code to determine which GATE_CTRL bit field
+ * should be used. This is a temporary solution - a better approach
+ * would be to associate clock type-specific data with the clock,
+ * similar to the struct dpll_data approach.
+ */
+#define ENABLE_REG_32BIT (1 << 0) /* Use 32-bit access */
+#define CLOCK_IDLE_CONTROL (1 << 1)
+#define CLOCK_NO_IDLE_PARENT (1 << 2)
+#define ENABLE_ON_INIT (1 << 3) /* Enable upon framework init */
+#define INVERT_ENABLE (1 << 4) /* 0 enables, 1 disables */
+#define CLOCK_CLKOUTX2 (1 << 5)
+
+/**
+ * struct clk - OMAP struct clk
+ * @node: list_head connecting this clock into the full clock list
+ * @ops: struct clkops * for this clock
+ * @name: the name of the clock in the hardware (used in hwmod data and debug)
+ * @parent: pointer to this clock's parent struct clk
+ * @children: list_head connecting to the child clks' @sibling list_heads
+ * @sibling: list_head connecting this clk to its parent clk's @children
+ * @rate: current clock rate
+ * @enable_reg: register to write to enable the clock (see @enable_bit)
+ * @recalc: fn ptr that returns the clock's current rate
+ * @set_rate: fn ptr that can change the clock's current rate
+ * @round_rate: fn ptr that can round the clock's current rate
+ * @init: fn ptr to do clock-specific initialization
+ * @enable_bit: bitshift to write to enable/disable the clock (see @enable_reg)
+ * @usecount: number of users that have requested this clock to be enabled
+ * @fixed_div: when > 0, this clock's rate is its parent's rate / @fixed_div
+ * @flags: see "struct clk.flags possibilities" above
+ * @clksel_reg: for clksel clks, register va containing src/divisor select
+ * @clksel_mask: bitmask in @clksel_reg for the src/divisor selector
+ * @clksel: for clksel clks, pointer to struct clksel for this clock
+ * @dpll_data: for DPLLs, pointer to struct dpll_data for this clock
+ * @clkdm_name: clockdomain name that this clock is contained in
+ * @clkdm: pointer to struct clockdomain, resolved from @clkdm_name at runtime
+ * @rate_offset: bitshift for rate selection bitfield (OMAP1 only)
+ * @src_offset: bitshift for source selection bitfield (OMAP1 only)
+ *
+ * XXX @rate_offset, @src_offset should probably be removed and OMAP1
+ * clock code converted to use clksel.
+ *
+ * XXX @usecount is poorly named. It should be "enable_count" or
+ * something similar. "users" in the description refers to kernel
+ * code (core code or drivers) that have called clk_enable() and not
+ * yet called clk_disable(); the usecount of parent clocks is also
+ * incremented by the clock code when clk_enable() is called on child
+ * clocks and decremented by the clock code when clk_disable() is
+ * called on child clocks.
+ *
+ * XXX @clkdm, @usecount, @children, @sibling should be marked for
+ * internal use only.
+ *
+ * @children and @sibling are used to optimize parent-to-child clock
+ * tree traversals. (child-to-parent traversals use @parent.)
+ *
+ * XXX The notion of the clock's current rate probably needs to be
+ * separated from the clock's target rate.
+ */
+struct clk {
+ struct list_head node;
+ const struct clkops *ops;
+ const char *name;
+ struct clk *parent;
+ struct list_head children;
+ struct list_head sibling; /* node for children */
+ unsigned long rate;
+ void __iomem *enable_reg;
+ unsigned long (*recalc)(struct clk *);
+ int (*set_rate)(struct clk *, unsigned long);
+ long (*round_rate)(struct clk *, unsigned long);
+ void (*init)(struct clk *);
+ u8 enable_bit;
+ s8 usecount;
+ u8 fixed_div;
+ u8 flags;
+ void __iomem *clksel_reg;
+ u32 clksel_mask;
+ const struct clksel *clksel;
+ struct dpll_data *dpll_data;
+ const char *clkdm_name;
+ struct clockdomain *clkdm;
+#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
+ struct dentry *dent; /* For visible tree hierarchy */
+#endif
+};
+
+struct clk_functions {
+ int (*clk_enable)(struct clk *clk);
+ void (*clk_disable)(struct clk *clk);
+ long (*clk_round_rate)(struct clk *clk, unsigned long rate);
+ int (*clk_set_rate)(struct clk *clk, unsigned long rate);
+ int (*clk_set_parent)(struct clk *clk, struct clk *parent);
+ void (*clk_allow_idle)(struct clk *clk);
+ void (*clk_deny_idle)(struct clk *clk);
+ void (*clk_disable_unused)(struct clk *clk);
+};
+
+extern int mpurate;
+
+extern int clk_init(struct clk_functions *custom_clocks);
+extern void clk_preinit(struct clk *clk);
+extern int clk_register(struct clk *clk);
+extern void clk_reparent(struct clk *child, struct clk *parent);
+extern void clk_unregister(struct clk *clk);
+extern void propagate_rate(struct clk *clk);
+extern void recalculate_root_clocks(void);
+extern unsigned long followparent_recalc(struct clk *clk);
+extern void clk_enable_init_clocks(void);
+unsigned long omap_fixed_divisor_recalc(struct clk *clk);
+extern struct clk *omap_clk_get_by_name(const char *name);
+extern int omap_clk_enable_autoidle_all(void);
+extern int omap_clk_disable_autoidle_all(void);
+
+extern const struct clkops clkops_null;
+
+extern struct clk dummy_ck;
+
/* CM_CLKSEL2_PLL.CORE_CLK_SRC bits (2XXX) */
#define CORE_CLK_SRC_32K 0x0
@@ -94,33 +409,6 @@
u32 omap2_get_dpll_rate(struct clk *clk);
void omap2_init_dpll_parent(struct clk *clk);
-int omap2_wait_clock_ready(void __iomem *reg, u32 cval, const char *name);
-
-
-#ifdef CONFIG_ARCH_OMAP2
-void omap2xxx_clk_prepare_for_reboot(void);
-#else
-static inline void omap2xxx_clk_prepare_for_reboot(void)
-{
-}
-#endif
-
-#ifdef CONFIG_ARCH_OMAP3
-void omap3_clk_prepare_for_reboot(void);
-#else
-static inline void omap3_clk_prepare_for_reboot(void)
-{
-}
-#endif
-
-#ifdef CONFIG_ARCH_OMAP4
-void omap4_clk_prepare_for_reboot(void);
-#else
-static inline void omap4_clk_prepare_for_reboot(void)
-{
-}
-#endif
-
int omap2_dflt_clk_enable(struct clk *clk);
void omap2_dflt_clk_disable(struct clk *clk);
void omap2_clk_dflt_find_companion(struct clk *clk, void __iomem **other_reg,
@@ -139,7 +427,6 @@
extern const struct clkops clkops_omap2_dflt;
extern struct clk_functions omap2_clk_functions;
-extern struct clk *vclk, *sclk;
extern const struct clksel_rate gpt_32k_rates[];
extern const struct clksel_rate gpt_sys_rates[];
diff --git a/arch/arm/mach-omap2/clock2420_data.c b/arch/arm/mach-omap2/clock2420_data.c
index c3cde1a..608874b6 100644
--- a/arch/arm/mach-omap2/clock2420_data.c
+++ b/arch/arm/mach-omap2/clock2420_data.c
@@ -1,7 +1,7 @@
/*
* OMAP2420 clock data
*
- * Copyright (C) 2005-2009 Texas Instruments, Inc.
+ * Copyright (C) 2005-2009, 2012 Texas Instruments, Inc.
* Copyright (C) 2004-2011 Nokia Corporation
*
* Contacts:
@@ -18,14 +18,12 @@
#include <linux/clk.h>
#include <linux/list.h>
-#include <plat/clkdev_omap.h>
-
#include "soc.h"
#include "iomap.h"
#include "clock.h"
#include "clock2xxx.h"
#include "opp2xxx.h"
-#include "cm2xxx_3xxx.h"
+#include "cm2xxx.h"
#include "prm2xxx_3xxx.h"
#include "prm-regbits-24xx.h"
#include "cm-regbits-24xx.h"
@@ -126,6 +124,7 @@
.name = "dpll_ck",
.ops = &clkops_omap2xxx_dpll_ops,
.parent = &sys_ck, /* Can be func_32k also */
+ .init = &omap2xxx_clkt_dpllcore_init,
.dpll_data = &dpll_dd,
.clkdm_name = "wkup_clkdm",
.recalc = &omap2_dpllcore_recalc,
@@ -1926,17 +1925,12 @@
int __init omap2420_clk_init(void)
{
- const struct prcm_config *prcm;
struct omap_clk *c;
- u32 clkrate;
prcm_clksrc_ctrl = OMAP2420_PRCM_CLKSRC_CTRL;
- cm_idlest_pll = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST);
cpu_mask = RATE_IN_242X;
rate_table = omap2420_rate_table;
- clk_init(&omap2_clk_functions);
-
for (c = omap2420_clks; c < omap2420_clks + ARRAY_SIZE(omap2420_clks);
c++)
clk_preinit(c->lk.clk);
@@ -1953,20 +1947,13 @@
omap2_init_clk_clkdm(c->lk.clk);
}
+ omap2xxx_clkt_vps_late_init();
+
/* Disable autoidle on all clocks; let the PM code enable it later */
omap_clk_disable_autoidle_all();
- /* Check the MPU rate set by bootloader */
- clkrate = omap2xxx_clk_get_core_rate(&dpll_ck);
- for (prcm = rate_table; prcm->mpu_speed; prcm++) {
- if (!(prcm->flags & cpu_mask))
- continue;
- if (prcm->xtal_speed != sys_ck.rate)
- continue;
- if (prcm->dpll_speed <= clkrate)
- break;
- }
- curr_prcm_set = prcm;
+ /* XXX Can this be done from the virt_prcm_set clk init function? */
+ omap2xxx_clkt_vps_check_bootloader_rates();
recalculate_root_clocks();
@@ -1980,11 +1967,6 @@
*/
clk_enable_init_clocks();
- /* Avoid sleeping sleeping during omap2_clk_prepare_for_reboot() */
- vclk = clk_get(NULL, "virt_prcm_set");
- sclk = clk_get(NULL, "sys_ck");
- dclk = clk_get(NULL, "dpll_ck");
-
return 0;
}
diff --git a/arch/arm/mach-omap2/clock2430.c b/arch/arm/mach-omap2/clock2430.c
index a8e3261..e37df53 100644
--- a/arch/arm/mach-omap2/clock2430.c
+++ b/arch/arm/mach-omap2/clock2430.c
@@ -21,13 +21,11 @@
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/clock.h>
-
#include "soc.h"
#include "iomap.h"
#include "clock.h"
#include "clock2xxx.h"
-#include "cm2xxx_3xxx.h"
+#include "cm2xxx.h"
#include "cm-regbits-24xx.h"
/**
diff --git a/arch/arm/mach-omap2/clock2430_data.c b/arch/arm/mach-omap2/clock2430_data.c
index 22404fe..b179b6e 100644
--- a/arch/arm/mach-omap2/clock2430_data.c
+++ b/arch/arm/mach-omap2/clock2430_data.c
@@ -1,7 +1,7 @@
/*
* OMAP2430 clock data
*
- * Copyright (C) 2005-2009 Texas Instruments, Inc.
+ * Copyright (C) 2005-2009, 2012 Texas Instruments, Inc.
* Copyright (C) 2004-2011 Nokia Corporation
*
* Contacts:
@@ -17,14 +17,12 @@
#include <linux/clk.h>
#include <linux/list.h>
-#include <plat/clkdev_omap.h>
-
#include "soc.h"
#include "iomap.h"
#include "clock.h"
#include "clock2xxx.h"
#include "opp2xxx.h"
-#include "cm2xxx_3xxx.h"
+#include "cm2xxx.h"
#include "prm2xxx_3xxx.h"
#include "prm-regbits-24xx.h"
#include "cm-regbits-24xx.h"
@@ -125,6 +123,7 @@
.name = "dpll_ck",
.ops = &clkops_omap2xxx_dpll_ops,
.parent = &sys_ck, /* Can be func_32k also */
+ .init = &omap2xxx_clkt_dpllcore_init,
.dpll_data = &dpll_dd,
.clkdm_name = "wkup_clkdm",
.recalc = &omap2_dpllcore_recalc,
@@ -2025,17 +2024,12 @@
int __init omap2430_clk_init(void)
{
- const struct prcm_config *prcm;
struct omap_clk *c;
- u32 clkrate;
prcm_clksrc_ctrl = OMAP2430_PRCM_CLKSRC_CTRL;
- cm_idlest_pll = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST);
cpu_mask = RATE_IN_243X;
rate_table = omap2430_rate_table;
- clk_init(&omap2_clk_functions);
-
for (c = omap2430_clks; c < omap2430_clks + ARRAY_SIZE(omap2430_clks);
c++)
clk_preinit(c->lk.clk);
@@ -2052,20 +2046,13 @@
omap2_init_clk_clkdm(c->lk.clk);
}
+ omap2xxx_clkt_vps_late_init();
+
/* Disable autoidle on all clocks; let the PM code enable it later */
omap_clk_disable_autoidle_all();
- /* Check the MPU rate set by bootloader */
- clkrate = omap2xxx_clk_get_core_rate(&dpll_ck);
- for (prcm = rate_table; prcm->mpu_speed; prcm++) {
- if (!(prcm->flags & cpu_mask))
- continue;
- if (prcm->xtal_speed != sys_ck.rate)
- continue;
- if (prcm->dpll_speed <= clkrate)
- break;
- }
- curr_prcm_set = prcm;
+ /* XXX Can this be done from the virt_prcm_set clk init function? */
+ omap2xxx_clkt_vps_check_bootloader_rates();
recalculate_root_clocks();
@@ -2079,11 +2066,6 @@
*/
clk_enable_init_clocks();
- /* Avoid sleeping sleeping during omap2_clk_prepare_for_reboot() */
- vclk = clk_get(NULL, "virt_prcm_set");
- sclk = clk_get(NULL, "sys_ck");
- dclk = clk_get(NULL, "dpll_ck");
-
return 0;
}
diff --git a/arch/arm/mach-omap2/clock2xxx.c b/arch/arm/mach-omap2/clock2xxx.c
index e92be1f..5f7faeb 100644
--- a/arch/arm/mach-omap2/clock2xxx.c
+++ b/arch/arm/mach-omap2/clock2xxx.c
@@ -22,35 +22,17 @@
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/clock.h>
-
#include "soc.h"
#include "clock.h"
#include "clock2xxx.h"
#include "cm.h"
#include "cm-regbits-24xx.h"
-struct clk *vclk, *sclk, *dclk;
-
/*
* Omap24xx specific clock functions
*/
/*
- * Set clocks for bypass mode for reboot to work.
- */
-void omap2xxx_clk_prepare_for_reboot(void)
-{
- u32 rate;
-
- if (vclk == NULL || sclk == NULL)
- return;
-
- rate = clk_get_rate(sclk);
- clk_set_rate(vclk, rate);
-}
-
-/*
* Switch the MPU rate if specified on cmdline. We cannot do this
* early until cmdline is parsed. XXX This should be removed from the
* clock code and handled by the OPP layer code in the near future.
diff --git a/arch/arm/mach-omap2/clock2xxx.h b/arch/arm/mach-omap2/clock2xxx.h
index cb6df8c..ce809c9 100644
--- a/arch/arm/mach-omap2/clock2xxx.h
+++ b/arch/arm/mach-omap2/clock2xxx.h
@@ -15,10 +15,13 @@
unsigned long omap2_osc_clk_recalc(struct clk *clk);
unsigned long omap2_dpllcore_recalc(struct clk *clk);
int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate);
-unsigned long omap2xxx_clk_get_core_rate(struct clk *clk);
+unsigned long omap2xxx_clk_get_core_rate(void);
u32 omap2xxx_get_apll_clkin(void);
u32 omap2xxx_get_sysclkdiv(void);
void omap2xxx_clk_prepare_for_reboot(void);
+void omap2xxx_clkt_dpllcore_init(struct clk *clk);
+void omap2xxx_clkt_vps_check_bootloader_rates(void);
+void omap2xxx_clkt_vps_late_init(void);
#ifdef CONFIG_SOC_OMAP2420
int omap2420_clk_init(void);
@@ -32,9 +35,7 @@
#define omap2430_clk_init() do { } while(0)
#endif
-extern void __iomem *prcm_clksrc_ctrl, *cm_idlest_pll;
-
-extern struct clk *dclk;
+extern void __iomem *prcm_clksrc_ctrl;
extern const struct clkops clkops_omap2430_i2chs_wait;
extern const struct clkops clkops_oscck;
diff --git a/arch/arm/mach-omap2/clock33xx_data.c b/arch/arm/mach-omap2/clock33xx_data.c
index 114ab4b..17e3de51 100644
--- a/arch/arm/mach-omap2/clock33xx_data.c
+++ b/arch/arm/mach-omap2/clock33xx_data.c
@@ -17,9 +17,8 @@
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/clk.h>
-#include <plat/clkdev_omap.h>
-#include "am33xx.h"
+#include "soc.h"
#include "iomap.h"
#include "control.h"
#include "clock.h"
@@ -1073,6 +1072,8 @@
CLK(NULL, "gfx_fck_div_ck", &gfx_fck_div_ck, CK_AM33XX),
CLK(NULL, "sysclkout_pre_ck", &sysclkout_pre_ck, CK_AM33XX),
CLK(NULL, "clkout2_ck", &clkout2_ck, CK_AM33XX),
+ CLK(NULL, "timer_32k_ck", &clkdiv32k_ick, CK_AM33XX),
+ CLK(NULL, "timer_sys_ck", &sys_clkin_ck, CK_AM33XX),
};
int __init am33xx_clk_init(void)
@@ -1085,8 +1086,6 @@
cpu_clkflg = CK_AM33XX;
}
- clk_init(&omap2_clk_functions);
-
for (c = am33xx_clks; c < am33xx_clks + ARRAY_SIZE(am33xx_clks); c++)
clk_preinit(c->lk.clk);
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index 1fc96b9..e41819b 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -21,11 +21,9 @@
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/clock.h>
-
#include "clock.h"
#include "clock34xx.h"
-#include "cm2xxx_3xxx.h"
+#include "cm3xxx.h"
#include "cm-regbits-34xx.h"
/**
diff --git a/arch/arm/mach-omap2/clock3517.c b/arch/arm/mach-omap2/clock3517.c
index 2e97d08..622ea05 100644
--- a/arch/arm/mach-omap2/clock3517.c
+++ b/arch/arm/mach-omap2/clock3517.c
@@ -21,11 +21,9 @@
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/clock.h>
-
#include "clock.h"
#include "clock3517.h"
-#include "cm2xxx_3xxx.h"
+#include "cm3xxx.h"
#include "cm-regbits-34xx.h"
/*
diff --git a/arch/arm/mach-omap2/clock36xx.c b/arch/arm/mach-omap2/clock36xx.c
index 0c5e25e..0e1e9e4 100644
--- a/arch/arm/mach-omap2/clock36xx.c
+++ b/arch/arm/mach-omap2/clock36xx.c
@@ -22,8 +22,6 @@
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/clock.h>
-
#include "clock.h"
#include "clock36xx.h"
diff --git a/arch/arm/mach-omap2/clock3xxx.c b/arch/arm/mach-omap2/clock3xxx.c
index 83bb014..3e8aca2 100644
--- a/arch/arm/mach-omap2/clock3xxx.c
+++ b/arch/arm/mach-omap2/clock3xxx.c
@@ -21,8 +21,6 @@
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/clock.h>
-
#include "soc.h"
#include "clock.h"
#include "clock3xxx.h"
diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c
index 1f42c9d..6cca199 100644
--- a/arch/arm/mach-omap2/clock3xxx_data.c
+++ b/arch/arm/mach-omap2/clock3xxx_data.c
@@ -21,8 +21,6 @@
#include <linux/list.h>
#include <linux/io.h>
-#include <plat/clkdev_omap.h>
-
#include "soc.h"
#include "iomap.h"
#include "clock.h"
@@ -30,7 +28,7 @@
#include "clock34xx.h"
#include "clock36xx.h"
#include "clock3517.h"
-#include "cm2xxx_3xxx.h"
+#include "cm3xxx.h"
#include "cm-regbits-34xx.h"
#include "prm2xxx_3xxx.h"
#include "prm-regbits-34xx.h"
@@ -3573,8 +3571,6 @@
else
dpll4_dd = dpll4_dd_34xx;
- clk_init(&omap2_clk_functions);
-
for (c = omap3xxx_clks; c < omap3xxx_clks + ARRAY_SIZE(omap3xxx_clks);
c++)
clk_preinit(c->lk.clk);
diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c
index 6efc30c..2a450c9 100644
--- a/arch/arm/mach-omap2/clock44xx_data.c
+++ b/arch/arm/mach-omap2/clock44xx_data.c
@@ -28,8 +28,6 @@
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/clkdev_omap.h>
-
#include "soc.h"
#include "iomap.h"
#include "clock.h"
@@ -3366,8 +3364,6 @@
return 0;
}
- clk_init(&omap2_clk_functions);
-
/*
* Must stay commented until all OMAP SoC drivers are
* converted to runtime PM, or drivers may start crashing
diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c
index 512e79a..64e5046 100644
--- a/arch/arm/mach-omap2/clockdomain.c
+++ b/arch/arm/mach-omap2/clockdomain.c
@@ -27,7 +27,8 @@
#include <linux/bitops.h>
-#include <plat/clock.h>
+#include "soc.h"
+#include "clock.h"
#include "clockdomain.h"
/* clkdm_list contains all registered struct clockdomains */
diff --git a/arch/arm/mach-omap2/clockdomain.h b/arch/arm/mach-omap2/clockdomain.h
index 629576b..bc42446 100644
--- a/arch/arm/mach-omap2/clockdomain.h
+++ b/arch/arm/mach-omap2/clockdomain.h
@@ -18,9 +18,8 @@
#include <linux/spinlock.h>
#include "powerdomain.h"
-#include <plat/clock.h>
-#include <plat/omap_hwmod.h>
-#include <plat/cpu.h>
+#include "clock.h"
+#include "omap_hwmod.h"
/*
* Clockdomain flags
diff --git a/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c b/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c
deleted file mode 100644
index 70294f5..0000000
--- a/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c
+++ /dev/null
@@ -1,339 +0,0 @@
-/*
- * OMAP2 and OMAP3 clockdomain control
- *
- * Copyright (C) 2008-2010 Texas Instruments, Inc.
- * Copyright (C) 2008-2010 Nokia Corporation
- *
- * Derived from mach-omap2/clockdomain.c written by Paul Walmsley
- * Rajendra Nayak <rnayak@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/types.h>
-#include <plat/prcm.h>
-#include "prm.h"
-#include "prm2xxx_3xxx.h"
-#include "cm.h"
-#include "cm2xxx_3xxx.h"
-#include "cm-regbits-24xx.h"
-#include "cm-regbits-34xx.h"
-#include "prm-regbits-24xx.h"
-#include "clockdomain.h"
-
-static int omap2_clkdm_add_wkdep(struct clockdomain *clkdm1,
- struct clockdomain *clkdm2)
-{
- omap2_prm_set_mod_reg_bits((1 << clkdm2->dep_bit),
- clkdm1->pwrdm.ptr->prcm_offs, PM_WKDEP);
- return 0;
-}
-
-static int omap2_clkdm_del_wkdep(struct clockdomain *clkdm1,
- struct clockdomain *clkdm2)
-{
- omap2_prm_clear_mod_reg_bits((1 << clkdm2->dep_bit),
- clkdm1->pwrdm.ptr->prcm_offs, PM_WKDEP);
- return 0;
-}
-
-static int omap2_clkdm_read_wkdep(struct clockdomain *clkdm1,
- struct clockdomain *clkdm2)
-{
- return omap2_prm_read_mod_bits_shift(clkdm1->pwrdm.ptr->prcm_offs,
- PM_WKDEP, (1 << clkdm2->dep_bit));
-}
-
-static int omap2_clkdm_clear_all_wkdeps(struct clockdomain *clkdm)
-{
- struct clkdm_dep *cd;
- u32 mask = 0;
-
- for (cd = clkdm->wkdep_srcs; cd && cd->clkdm_name; cd++) {
- if (!cd->clkdm)
- continue; /* only happens if data is erroneous */
-
- /* PRM accesses are slow, so minimize them */
- mask |= 1 << cd->clkdm->dep_bit;
- atomic_set(&cd->wkdep_usecount, 0);
- }
-
- omap2_prm_clear_mod_reg_bits(mask, clkdm->pwrdm.ptr->prcm_offs,
- PM_WKDEP);
- return 0;
-}
-
-static int omap3_clkdm_add_sleepdep(struct clockdomain *clkdm1,
- struct clockdomain *clkdm2)
-{
- omap2_cm_set_mod_reg_bits((1 << clkdm2->dep_bit),
- clkdm1->pwrdm.ptr->prcm_offs,
- OMAP3430_CM_SLEEPDEP);
- return 0;
-}
-
-static int omap3_clkdm_del_sleepdep(struct clockdomain *clkdm1,
- struct clockdomain *clkdm2)
-{
- omap2_cm_clear_mod_reg_bits((1 << clkdm2->dep_bit),
- clkdm1->pwrdm.ptr->prcm_offs,
- OMAP3430_CM_SLEEPDEP);
- return 0;
-}
-
-static int omap3_clkdm_read_sleepdep(struct clockdomain *clkdm1,
- struct clockdomain *clkdm2)
-{
- return omap2_prm_read_mod_bits_shift(clkdm1->pwrdm.ptr->prcm_offs,
- OMAP3430_CM_SLEEPDEP, (1 << clkdm2->dep_bit));
-}
-
-static int omap3_clkdm_clear_all_sleepdeps(struct clockdomain *clkdm)
-{
- struct clkdm_dep *cd;
- u32 mask = 0;
-
- for (cd = clkdm->sleepdep_srcs; cd && cd->clkdm_name; cd++) {
- if (!cd->clkdm)
- continue; /* only happens if data is erroneous */
-
- /* PRM accesses are slow, so minimize them */
- mask |= 1 << cd->clkdm->dep_bit;
- atomic_set(&cd->sleepdep_usecount, 0);
- }
- omap2_prm_clear_mod_reg_bits(mask, clkdm->pwrdm.ptr->prcm_offs,
- OMAP3430_CM_SLEEPDEP);
- return 0;
-}
-
-static int omap2_clkdm_sleep(struct clockdomain *clkdm)
-{
- omap2_cm_set_mod_reg_bits(OMAP24XX_FORCESTATE_MASK,
- clkdm->pwrdm.ptr->prcm_offs,
- OMAP2_PM_PWSTCTRL);
- return 0;
-}
-
-static int omap2_clkdm_wakeup(struct clockdomain *clkdm)
-{
- omap2_cm_clear_mod_reg_bits(OMAP24XX_FORCESTATE_MASK,
- clkdm->pwrdm.ptr->prcm_offs,
- OMAP2_PM_PWSTCTRL);
- return 0;
-}
-
-static void omap2_clkdm_allow_idle(struct clockdomain *clkdm)
-{
- if (atomic_read(&clkdm->usecount) > 0)
- _clkdm_add_autodeps(clkdm);
-
- omap2xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
- clkdm->clktrctrl_mask);
-}
-
-static void omap2_clkdm_deny_idle(struct clockdomain *clkdm)
-{
- omap2xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
- clkdm->clktrctrl_mask);
-
- if (atomic_read(&clkdm->usecount) > 0)
- _clkdm_del_autodeps(clkdm);
-}
-
-static void _enable_hwsup(struct clockdomain *clkdm)
-{
- if (cpu_is_omap24xx())
- omap2xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
- clkdm->clktrctrl_mask);
- else if (cpu_is_omap34xx())
- omap3xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
- clkdm->clktrctrl_mask);
-}
-
-static void _disable_hwsup(struct clockdomain *clkdm)
-{
- if (cpu_is_omap24xx())
- omap2xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
- clkdm->clktrctrl_mask);
- else if (cpu_is_omap34xx())
- omap3xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
- clkdm->clktrctrl_mask);
-}
-
-static int omap3_clkdm_sleep(struct clockdomain *clkdm)
-{
- omap3xxx_cm_clkdm_force_sleep(clkdm->pwrdm.ptr->prcm_offs,
- clkdm->clktrctrl_mask);
- return 0;
-}
-
-static int omap3_clkdm_wakeup(struct clockdomain *clkdm)
-{
- omap3xxx_cm_clkdm_force_wakeup(clkdm->pwrdm.ptr->prcm_offs,
- clkdm->clktrctrl_mask);
- return 0;
-}
-
-static int omap2_clkdm_clk_enable(struct clockdomain *clkdm)
-{
- bool hwsup = false;
-
- if (!clkdm->clktrctrl_mask)
- return 0;
-
- hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
- clkdm->clktrctrl_mask);
-
- if (hwsup) {
- /* Disable HW transitions when we are changing deps */
- _disable_hwsup(clkdm);
- _clkdm_add_autodeps(clkdm);
- _enable_hwsup(clkdm);
- } else {
- if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
- omap2_clkdm_wakeup(clkdm);
- }
-
- return 0;
-}
-
-static int omap2_clkdm_clk_disable(struct clockdomain *clkdm)
-{
- bool hwsup = false;
-
- if (!clkdm->clktrctrl_mask)
- return 0;
-
- hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
- clkdm->clktrctrl_mask);
-
- if (hwsup) {
- /* Disable HW transitions when we are changing deps */
- _disable_hwsup(clkdm);
- _clkdm_del_autodeps(clkdm);
- _enable_hwsup(clkdm);
- } else {
- if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP)
- omap2_clkdm_sleep(clkdm);
- }
-
- return 0;
-}
-
-static void omap3_clkdm_allow_idle(struct clockdomain *clkdm)
-{
- if (atomic_read(&clkdm->usecount) > 0)
- _clkdm_add_autodeps(clkdm);
-
- omap3xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
- clkdm->clktrctrl_mask);
-}
-
-static void omap3_clkdm_deny_idle(struct clockdomain *clkdm)
-{
- omap3xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
- clkdm->clktrctrl_mask);
-
- if (atomic_read(&clkdm->usecount) > 0)
- _clkdm_del_autodeps(clkdm);
-}
-
-static int omap3xxx_clkdm_clk_enable(struct clockdomain *clkdm)
-{
- bool hwsup = false;
-
- if (!clkdm->clktrctrl_mask)
- return 0;
-
- /*
- * The CLKDM_MISSING_IDLE_REPORTING flag documentation has
- * more details on the unpleasant problem this is working
- * around
- */
- if ((clkdm->flags & CLKDM_MISSING_IDLE_REPORTING) &&
- (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)) {
- omap3_clkdm_wakeup(clkdm);
- return 0;
- }
-
- hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
- clkdm->clktrctrl_mask);
-
- if (hwsup) {
- /* Disable HW transitions when we are changing deps */
- _disable_hwsup(clkdm);
- _clkdm_add_autodeps(clkdm);
- _enable_hwsup(clkdm);
- } else {
- if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
- omap3_clkdm_wakeup(clkdm);
- }
-
- return 0;
-}
-
-static int omap3xxx_clkdm_clk_disable(struct clockdomain *clkdm)
-{
- bool hwsup = false;
-
- if (!clkdm->clktrctrl_mask)
- return 0;
-
- /*
- * The CLKDM_MISSING_IDLE_REPORTING flag documentation has
- * more details on the unpleasant problem this is working
- * around
- */
- if (clkdm->flags & CLKDM_MISSING_IDLE_REPORTING &&
- !(clkdm->flags & CLKDM_CAN_FORCE_SLEEP)) {
- _enable_hwsup(clkdm);
- return 0;
- }
-
- hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
- clkdm->clktrctrl_mask);
-
- if (hwsup) {
- /* Disable HW transitions when we are changing deps */
- _disable_hwsup(clkdm);
- _clkdm_del_autodeps(clkdm);
- _enable_hwsup(clkdm);
- } else {
- if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP)
- omap3_clkdm_sleep(clkdm);
- }
-
- return 0;
-}
-
-struct clkdm_ops omap2_clkdm_operations = {
- .clkdm_add_wkdep = omap2_clkdm_add_wkdep,
- .clkdm_del_wkdep = omap2_clkdm_del_wkdep,
- .clkdm_read_wkdep = omap2_clkdm_read_wkdep,
- .clkdm_clear_all_wkdeps = omap2_clkdm_clear_all_wkdeps,
- .clkdm_sleep = omap2_clkdm_sleep,
- .clkdm_wakeup = omap2_clkdm_wakeup,
- .clkdm_allow_idle = omap2_clkdm_allow_idle,
- .clkdm_deny_idle = omap2_clkdm_deny_idle,
- .clkdm_clk_enable = omap2_clkdm_clk_enable,
- .clkdm_clk_disable = omap2_clkdm_clk_disable,
-};
-
-struct clkdm_ops omap3_clkdm_operations = {
- .clkdm_add_wkdep = omap2_clkdm_add_wkdep,
- .clkdm_del_wkdep = omap2_clkdm_del_wkdep,
- .clkdm_read_wkdep = omap2_clkdm_read_wkdep,
- .clkdm_clear_all_wkdeps = omap2_clkdm_clear_all_wkdeps,
- .clkdm_add_sleepdep = omap3_clkdm_add_sleepdep,
- .clkdm_del_sleepdep = omap3_clkdm_del_sleepdep,
- .clkdm_read_sleepdep = omap3_clkdm_read_sleepdep,
- .clkdm_clear_all_sleepdeps = omap3_clkdm_clear_all_sleepdeps,
- .clkdm_sleep = omap3_clkdm_sleep,
- .clkdm_wakeup = omap3_clkdm_wakeup,
- .clkdm_allow_idle = omap3_clkdm_allow_idle,
- .clkdm_deny_idle = omap3_clkdm_deny_idle,
- .clkdm_clk_enable = omap3xxx_clkdm_clk_enable,
- .clkdm_clk_disable = omap3xxx_clkdm_clk_disable,
-};
diff --git a/arch/arm/mach-omap2/clockdomain33xx.c b/arch/arm/mach-omap2/clockdomain33xx.c
deleted file mode 100644
index aca6388..0000000
--- a/arch/arm/mach-omap2/clockdomain33xx.c
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * AM33XX clockdomain control
- *
- * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/
- * Vaibhav Hiremath <hvaibhav@ti.com>
- *
- * Derived from mach-omap2/clockdomain44xx.c written by Rajendra Nayak
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/kernel.h>
-
-#include "clockdomain.h"
-#include "cm33xx.h"
-
-
-static int am33xx_clkdm_sleep(struct clockdomain *clkdm)
-{
- am33xx_cm_clkdm_force_sleep(clkdm->cm_inst, clkdm->clkdm_offs);
- return 0;
-}
-
-static int am33xx_clkdm_wakeup(struct clockdomain *clkdm)
-{
- am33xx_cm_clkdm_force_wakeup(clkdm->cm_inst, clkdm->clkdm_offs);
- return 0;
-}
-
-static void am33xx_clkdm_allow_idle(struct clockdomain *clkdm)
-{
- am33xx_cm_clkdm_enable_hwsup(clkdm->cm_inst, clkdm->clkdm_offs);
-}
-
-static void am33xx_clkdm_deny_idle(struct clockdomain *clkdm)
-{
- am33xx_cm_clkdm_disable_hwsup(clkdm->cm_inst, clkdm->clkdm_offs);
-}
-
-static int am33xx_clkdm_clk_enable(struct clockdomain *clkdm)
-{
- if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
- return am33xx_clkdm_wakeup(clkdm);
-
- return 0;
-}
-
-static int am33xx_clkdm_clk_disable(struct clockdomain *clkdm)
-{
- bool hwsup = false;
-
- hwsup = am33xx_cm_is_clkdm_in_hwsup(clkdm->cm_inst, clkdm->clkdm_offs);
-
- if (!hwsup && (clkdm->flags & CLKDM_CAN_FORCE_SLEEP))
- am33xx_clkdm_sleep(clkdm);
-
- return 0;
-}
-
-struct clkdm_ops am33xx_clkdm_operations = {
- .clkdm_sleep = am33xx_clkdm_sleep,
- .clkdm_wakeup = am33xx_clkdm_wakeup,
- .clkdm_allow_idle = am33xx_clkdm_allow_idle,
- .clkdm_deny_idle = am33xx_clkdm_deny_idle,
- .clkdm_clk_enable = am33xx_clkdm_clk_enable,
- .clkdm_clk_disable = am33xx_clkdm_clk_disable,
-};
diff --git a/arch/arm/mach-omap2/clockdomain44xx.c b/arch/arm/mach-omap2/clockdomain44xx.c
deleted file mode 100644
index 6fc6155..0000000
--- a/arch/arm/mach-omap2/clockdomain44xx.c
+++ /dev/null
@@ -1,151 +0,0 @@
-/*
- * OMAP4 clockdomain control
- *
- * Copyright (C) 2008-2010 Texas Instruments, Inc.
- * Copyright (C) 2008-2010 Nokia Corporation
- *
- * Derived from mach-omap2/clockdomain.c written by Paul Walmsley
- * Rajendra Nayak <rnayak@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include "clockdomain.h"
-#include "cminst44xx.h"
-#include "cm44xx.h"
-
-static int omap4_clkdm_add_wkup_sleep_dep(struct clockdomain *clkdm1,
- struct clockdomain *clkdm2)
-{
- omap4_cminst_set_inst_reg_bits((1 << clkdm2->dep_bit),
- clkdm1->prcm_partition,
- clkdm1->cm_inst, clkdm1->clkdm_offs +
- OMAP4_CM_STATICDEP);
- return 0;
-}
-
-static int omap4_clkdm_del_wkup_sleep_dep(struct clockdomain *clkdm1,
- struct clockdomain *clkdm2)
-{
- omap4_cminst_clear_inst_reg_bits((1 << clkdm2->dep_bit),
- clkdm1->prcm_partition,
- clkdm1->cm_inst, clkdm1->clkdm_offs +
- OMAP4_CM_STATICDEP);
- return 0;
-}
-
-static int omap4_clkdm_read_wkup_sleep_dep(struct clockdomain *clkdm1,
- struct clockdomain *clkdm2)
-{
- return omap4_cminst_read_inst_reg_bits(clkdm1->prcm_partition,
- clkdm1->cm_inst, clkdm1->clkdm_offs +
- OMAP4_CM_STATICDEP,
- (1 << clkdm2->dep_bit));
-}
-
-static int omap4_clkdm_clear_all_wkup_sleep_deps(struct clockdomain *clkdm)
-{
- struct clkdm_dep *cd;
- u32 mask = 0;
-
- if (!clkdm->prcm_partition)
- return 0;
-
- for (cd = clkdm->wkdep_srcs; cd && cd->clkdm_name; cd++) {
- if (!cd->clkdm)
- continue; /* only happens if data is erroneous */
-
- mask |= 1 << cd->clkdm->dep_bit;
- atomic_set(&cd->wkdep_usecount, 0);
- }
-
- omap4_cminst_clear_inst_reg_bits(mask, clkdm->prcm_partition,
- clkdm->cm_inst, clkdm->clkdm_offs +
- OMAP4_CM_STATICDEP);
- return 0;
-}
-
-static int omap4_clkdm_sleep(struct clockdomain *clkdm)
-{
- omap4_cminst_clkdm_enable_hwsup(clkdm->prcm_partition,
- clkdm->cm_inst, clkdm->clkdm_offs);
- return 0;
-}
-
-static int omap4_clkdm_wakeup(struct clockdomain *clkdm)
-{
- omap4_cminst_clkdm_force_wakeup(clkdm->prcm_partition,
- clkdm->cm_inst, clkdm->clkdm_offs);
- return 0;
-}
-
-static void omap4_clkdm_allow_idle(struct clockdomain *clkdm)
-{
- omap4_cminst_clkdm_enable_hwsup(clkdm->prcm_partition,
- clkdm->cm_inst, clkdm->clkdm_offs);
-}
-
-static void omap4_clkdm_deny_idle(struct clockdomain *clkdm)
-{
- if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
- omap4_clkdm_wakeup(clkdm);
- else
- omap4_cminst_clkdm_disable_hwsup(clkdm->prcm_partition,
- clkdm->cm_inst,
- clkdm->clkdm_offs);
-}
-
-static int omap4_clkdm_clk_enable(struct clockdomain *clkdm)
-{
- if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
- return omap4_clkdm_wakeup(clkdm);
-
- return 0;
-}
-
-static int omap4_clkdm_clk_disable(struct clockdomain *clkdm)
-{
- bool hwsup = false;
-
- if (!clkdm->prcm_partition)
- return 0;
-
- /*
- * The CLKDM_MISSING_IDLE_REPORTING flag documentation has
- * more details on the unpleasant problem this is working
- * around
- */
- if (clkdm->flags & CLKDM_MISSING_IDLE_REPORTING &&
- !(clkdm->flags & CLKDM_CAN_FORCE_SLEEP)) {
- omap4_clkdm_allow_idle(clkdm);
- return 0;
- }
-
- hwsup = omap4_cminst_is_clkdm_in_hwsup(clkdm->prcm_partition,
- clkdm->cm_inst, clkdm->clkdm_offs);
-
- if (!hwsup && (clkdm->flags & CLKDM_CAN_FORCE_SLEEP))
- omap4_clkdm_sleep(clkdm);
-
- return 0;
-}
-
-struct clkdm_ops omap4_clkdm_operations = {
- .clkdm_add_wkdep = omap4_clkdm_add_wkup_sleep_dep,
- .clkdm_del_wkdep = omap4_clkdm_del_wkup_sleep_dep,
- .clkdm_read_wkdep = omap4_clkdm_read_wkup_sleep_dep,
- .clkdm_clear_all_wkdeps = omap4_clkdm_clear_all_wkup_sleep_deps,
- .clkdm_add_sleepdep = omap4_clkdm_add_wkup_sleep_dep,
- .clkdm_del_sleepdep = omap4_clkdm_del_wkup_sleep_dep,
- .clkdm_read_sleepdep = omap4_clkdm_read_wkup_sleep_dep,
- .clkdm_clear_all_sleepdeps = omap4_clkdm_clear_all_wkup_sleep_deps,
- .clkdm_sleep = omap4_clkdm_sleep,
- .clkdm_wakeup = omap4_clkdm_wakeup,
- .clkdm_allow_idle = omap4_clkdm_allow_idle,
- .clkdm_deny_idle = omap4_clkdm_deny_idle,
- .clkdm_clk_enable = omap4_clkdm_clk_enable,
- .clkdm_clk_disable = omap4_clkdm_clk_disable,
-};
diff --git a/arch/arm/mach-omap2/clockdomains2420_data.c b/arch/arm/mach-omap2/clockdomains2420_data.c
index 5c74185..7e76bec 100644
--- a/arch/arm/mach-omap2/clockdomains2420_data.c
+++ b/arch/arm/mach-omap2/clockdomains2420_data.c
@@ -35,6 +35,7 @@
#include <linux/kernel.h>
#include <linux/io.h>
+#include "soc.h"
#include "clockdomain.h"
#include "prm2xxx_3xxx.h"
#include "cm2xxx_3xxx.h"
diff --git a/arch/arm/mach-omap2/clockdomains2430_data.c b/arch/arm/mach-omap2/clockdomains2430_data.c
index f096175..b923007 100644
--- a/arch/arm/mach-omap2/clockdomains2430_data.c
+++ b/arch/arm/mach-omap2/clockdomains2430_data.c
@@ -35,6 +35,7 @@
#include <linux/kernel.h>
#include <linux/io.h>
+#include "soc.h"
#include "clockdomain.h"
#include "prm2xxx_3xxx.h"
#include "cm2xxx_3xxx.h"
diff --git a/arch/arm/mach-omap2/clockdomains3xxx_data.c b/arch/arm/mach-omap2/clockdomains3xxx_data.c
index 933a35c..e6b91e5 100644
--- a/arch/arm/mach-omap2/clockdomains3xxx_data.c
+++ b/arch/arm/mach-omap2/clockdomains3xxx_data.c
@@ -33,6 +33,7 @@
#include <linux/kernel.h>
#include <linux/io.h>
+#include "soc.h"
#include "clockdomain.h"
#include "prm2xxx_3xxx.h"
#include "cm2xxx_3xxx.h"
diff --git a/arch/arm/mach-omap2/clockdomains44xx_data.c b/arch/arm/mach-omap2/clockdomains44xx_data.c
index b56d06b..95192a06 100644
--- a/arch/arm/mach-omap2/clockdomains44xx_data.c
+++ b/arch/arm/mach-omap2/clockdomains44xx_data.c
@@ -359,7 +359,7 @@
.clkdm_offs = OMAP4430_CM2_CAM_CAM_CDOFFS,
.wkdep_srcs = iss_wkup_sleep_deps,
.sleepdep_srcs = iss_wkup_sleep_deps,
- .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .flags = CLKDM_CAN_SWSUP,
};
static struct clockdomain l3_dss_44xx_clkdm = {
diff --git a/arch/arm/mach-omap2/cm-regbits-24xx.h b/arch/arm/mach-omap2/cm-regbits-24xx.h
index 6862904..11eaf16 100644
--- a/arch/arm/mach-omap2/cm-regbits-24xx.h
+++ b/arch/arm/mach-omap2/cm-regbits-24xx.h
@@ -333,7 +333,9 @@
#define OMAP24XX_EN_DPLL_MASK (0x3 << 0)
/* CM_IDLEST_CKGEN */
+#define OMAP24XX_ST_54M_APLL_SHIFT 9
#define OMAP24XX_ST_54M_APLL_MASK (1 << 9)
+#define OMAP24XX_ST_96M_APLL_SHIFT 8
#define OMAP24XX_ST_96M_APLL_MASK (1 << 8)
#define OMAP24XX_ST_54M_CLK_MASK (1 << 6)
#define OMAP24XX_ST_12M_CLK_MASK (1 << 5)
diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h
index f24e3f7..93473f9 100644
--- a/arch/arm/mach-omap2/cm.h
+++ b/arch/arm/mach-omap2/cm.h
@@ -1,7 +1,7 @@
/*
* OMAP2+ Clock Management prototypes
*
- * Copyright (C) 2007-2009 Texas Instruments, Inc.
+ * Copyright (C) 2007-2009, 2012 Texas Instruments, Inc.
* Copyright (C) 2007-2009 Nokia Corporation
*
* Written by Paul Walmsley
@@ -22,6 +22,12 @@
*/
#define MAX_MODULE_READY_TIME 2000
+# ifndef __ASSEMBLER__
+extern void __iomem *cm_base;
+extern void __iomem *cm2_base;
+extern void omap2_set_globals_cm(void __iomem *cm, void __iomem *cm2);
+# endif
+
/*
* MAX_MODULE_DISABLE_TIME: max duration in microseconds to wait for
* the PRCM to request that a module enter the inactive state in the
@@ -33,4 +39,26 @@
*/
#define MAX_MODULE_DISABLE_TIME 5000
+# ifndef __ASSEMBLER__
+
+/**
+ * struct cm_ll_data - fn ptrs to per-SoC CM function implementations
+ * @split_idlest_reg: ptr to the SoC CM-specific split_idlest_reg impl
+ * @wait_module_ready: ptr to the SoC CM-specific wait_module_ready impl
+ */
+struct cm_ll_data {
+ int (*split_idlest_reg)(void __iomem *idlest_reg, s16 *prcm_inst,
+ u8 *idlest_reg_id);
+ int (*wait_module_ready)(s16 prcm_mod, u8 idlest_id, u8 idlest_shift);
+};
+
+extern int cm_split_idlest_reg(void __iomem *idlest_reg, s16 *prcm_inst,
+ u8 *idlest_reg_id);
+extern int cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift);
+
+extern int cm_register(struct cm_ll_data *cld);
+extern int cm_unregister(struct cm_ll_data *cld);
+
+# endif
+
#endif
diff --git a/arch/arm/mach-omap2/cm2xxx.c b/arch/arm/mach-omap2/cm2xxx.c
new file mode 100644
index 0000000..db65069
--- /dev/null
+++ b/arch/arm/mach-omap2/cm2xxx.c
@@ -0,0 +1,381 @@
+/*
+ * OMAP2xxx CM module functions
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Copyright (C) 2008-2010, 2012 Texas Instruments, Inc.
+ * Paul Walmsley
+ * Rajendra Nayak <rnayak@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include "soc.h"
+#include "iomap.h"
+#include "common.h"
+#include "prm2xxx.h"
+#include "cm.h"
+#include "cm2xxx.h"
+#include "cm-regbits-24xx.h"
+#include "clockdomain.h"
+
+/* CM_AUTOIDLE_PLL.AUTO_* bit values for DPLLs */
+#define DPLL_AUTOIDLE_DISABLE 0x0
+#define OMAP2XXX_DPLL_AUTOIDLE_LOW_POWER_STOP 0x3
+
+/* CM_AUTOIDLE_PLL.AUTO_* bit values for APLLs (OMAP2xxx only) */
+#define OMAP2XXX_APLL_AUTOIDLE_DISABLE 0x0
+#define OMAP2XXX_APLL_AUTOIDLE_LOW_POWER_STOP 0x3
+
+/* CM_IDLEST_PLL bit value offset for APLLs (OMAP2xxx only) */
+#define EN_APLL_LOCKED 3
+
+static const u8 omap2xxx_cm_idlest_offs[] = {
+ CM_IDLEST1, CM_IDLEST2, OMAP2430_CM_IDLEST3, OMAP24XX_CM_IDLEST4
+};
+
+/*
+ *
+ */
+
+static void _write_clktrctrl(u8 c, s16 module, u32 mask)
+{
+ u32 v;
+
+ v = omap2_cm_read_mod_reg(module, OMAP2_CM_CLKSTCTRL);
+ v &= ~mask;
+ v |= c << __ffs(mask);
+ omap2_cm_write_mod_reg(v, module, OMAP2_CM_CLKSTCTRL);
+}
+
+bool omap2xxx_cm_is_clkdm_in_hwsup(s16 module, u32 mask)
+{
+ u32 v;
+
+ v = omap2_cm_read_mod_reg(module, OMAP2_CM_CLKSTCTRL);
+ v &= mask;
+ v >>= __ffs(mask);
+
+ return (v == OMAP24XX_CLKSTCTRL_ENABLE_AUTO) ? 1 : 0;
+}
+
+void omap2xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask)
+{
+ _write_clktrctrl(OMAP24XX_CLKSTCTRL_ENABLE_AUTO, module, mask);
+}
+
+void omap2xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask)
+{
+ _write_clktrctrl(OMAP24XX_CLKSTCTRL_DISABLE_AUTO, module, mask);
+}
+
+/*
+ * DPLL autoidle control
+ */
+
+static void _omap2xxx_set_dpll_autoidle(u8 m)
+{
+ u32 v;
+
+ v = omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE);
+ v &= ~OMAP24XX_AUTO_DPLL_MASK;
+ v |= m << OMAP24XX_AUTO_DPLL_SHIFT;
+ omap2_cm_write_mod_reg(v, PLL_MOD, CM_AUTOIDLE);
+}
+
+void omap2xxx_cm_set_dpll_disable_autoidle(void)
+{
+ _omap2xxx_set_dpll_autoidle(OMAP2XXX_DPLL_AUTOIDLE_LOW_POWER_STOP);
+}
+
+void omap2xxx_cm_set_dpll_auto_low_power_stop(void)
+{
+ _omap2xxx_set_dpll_autoidle(DPLL_AUTOIDLE_DISABLE);
+}
+
+/*
+ * APLL control
+ */
+
+static void _omap2xxx_set_apll_autoidle(u8 m, u32 mask)
+{
+ u32 v;
+
+ v = omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE);
+ v &= ~mask;
+ v |= m << __ffs(mask);
+ omap2_cm_write_mod_reg(v, PLL_MOD, CM_AUTOIDLE);
+}
+
+void omap2xxx_cm_set_apll54_disable_autoidle(void)
+{
+ _omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_LOW_POWER_STOP,
+ OMAP24XX_AUTO_54M_MASK);
+}
+
+void omap2xxx_cm_set_apll54_auto_low_power_stop(void)
+{
+ _omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_DISABLE,
+ OMAP24XX_AUTO_54M_MASK);
+}
+
+void omap2xxx_cm_set_apll96_disable_autoidle(void)
+{
+ _omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_LOW_POWER_STOP,
+ OMAP24XX_AUTO_96M_MASK);
+}
+
+void omap2xxx_cm_set_apll96_auto_low_power_stop(void)
+{
+ _omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_DISABLE,
+ OMAP24XX_AUTO_96M_MASK);
+}
+
+/* Enable an APLL if off */
+static int _omap2xxx_apll_enable(u8 enable_bit, u8 status_bit)
+{
+ u32 v, m;
+
+ m = EN_APLL_LOCKED << enable_bit;
+
+ v = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN);
+ if (v & m)
+ return 0; /* apll already enabled */
+
+ v |= m;
+ omap2_cm_write_mod_reg(v, PLL_MOD, CM_CLKEN);
+
+ omap2xxx_cm_wait_module_ready(PLL_MOD, 1, status_bit);
+
+ /*
+ * REVISIT: Should we return an error code if
+ * omap2xxx_cm_wait_module_ready() fails?
+ */
+ return 0;
+}
+
+/* Stop APLL */
+static void _omap2xxx_apll_disable(u8 enable_bit)
+{
+ u32 v;
+
+ v = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN);
+ v &= ~(EN_APLL_LOCKED << enable_bit);
+ omap2_cm_write_mod_reg(v, PLL_MOD, CM_CLKEN);
+}
+
+/* Enable an APLL if off */
+int omap2xxx_cm_apll54_enable(void)
+{
+ return _omap2xxx_apll_enable(OMAP24XX_EN_54M_PLL_SHIFT,
+ OMAP24XX_ST_54M_APLL_SHIFT);
+}
+
+/* Enable an APLL if off */
+int omap2xxx_cm_apll96_enable(void)
+{
+ return _omap2xxx_apll_enable(OMAP24XX_EN_96M_PLL_SHIFT,
+ OMAP24XX_ST_96M_APLL_SHIFT);
+}
+
+/* Stop APLL */
+void omap2xxx_cm_apll54_disable(void)
+{
+ _omap2xxx_apll_disable(OMAP24XX_EN_54M_PLL_SHIFT);
+}
+
+/* Stop APLL */
+void omap2xxx_cm_apll96_disable(void)
+{
+ _omap2xxx_apll_disable(OMAP24XX_EN_96M_PLL_SHIFT);
+}
+
+/**
+ * omap2xxx_cm_split_idlest_reg - split CM_IDLEST reg addr into its components
+ * @idlest_reg: CM_IDLEST* virtual address
+ * @prcm_inst: pointer to an s16 to return the PRCM instance offset
+ * @idlest_reg_id: pointer to a u8 to return the CM_IDLESTx register ID
+ *
+ * XXX This function is only needed until absolute register addresses are
+ * removed from the OMAP struct clk records.
+ */
+int omap2xxx_cm_split_idlest_reg(void __iomem *idlest_reg, s16 *prcm_inst,
+ u8 *idlest_reg_id)
+{
+ unsigned long offs;
+ u8 idlest_offs;
+ int i;
+
+ if (idlest_reg < cm_base || idlest_reg > (cm_base + 0x0fff))
+ return -EINVAL;
+
+ idlest_offs = (unsigned long)idlest_reg & 0xff;
+ for (i = 0; i < ARRAY_SIZE(omap2xxx_cm_idlest_offs); i++) {
+ if (idlest_offs == omap2xxx_cm_idlest_offs[i]) {
+ *idlest_reg_id = i + 1;
+ break;
+ }
+ }
+
+ if (i == ARRAY_SIZE(omap2xxx_cm_idlest_offs))
+ return -EINVAL;
+
+ offs = idlest_reg - cm_base;
+ offs &= 0xff00;
+ *prcm_inst = offs;
+
+ return 0;
+}
+
+/*
+ *
+ */
+
+/**
+ * omap2xxx_cm_wait_module_ready - wait for a module to leave idle or standby
+ * @prcm_mod: PRCM module offset
+ * @idlest_id: CM_IDLESTx register ID (i.e., x = 1, 2, 3)
+ * @idlest_shift: shift of the bit in the CM_IDLEST* register to check
+ *
+ * Wait for the PRCM to indicate that the module identified by
+ * (@prcm_mod, @idlest_id, @idlest_shift) is clocked. Return 0 upon
+ * success or -EBUSY if the module doesn't enable in time.
+ */
+int omap2xxx_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift)
+{
+ int ena = 0, i = 0;
+ u8 cm_idlest_reg;
+ u32 mask;
+
+ if (!idlest_id || (idlest_id > ARRAY_SIZE(omap2xxx_cm_idlest_offs)))
+ return -EINVAL;
+
+ cm_idlest_reg = omap2xxx_cm_idlest_offs[idlest_id - 1];
+
+ mask = 1 << idlest_shift;
+ ena = mask;
+
+ omap_test_timeout(((omap2_cm_read_mod_reg(prcm_mod, cm_idlest_reg) &
+ mask) == ena), MAX_MODULE_READY_TIME, i);
+
+ return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY;
+}
+
+/* Clockdomain low-level functions */
+
+static void omap2xxx_clkdm_allow_idle(struct clockdomain *clkdm)
+{
+ if (atomic_read(&clkdm->usecount) > 0)
+ _clkdm_add_autodeps(clkdm);
+
+ omap2xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+ clkdm->clktrctrl_mask);
+}
+
+static void omap2xxx_clkdm_deny_idle(struct clockdomain *clkdm)
+{
+ omap2xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+ clkdm->clktrctrl_mask);
+
+ if (atomic_read(&clkdm->usecount) > 0)
+ _clkdm_del_autodeps(clkdm);
+}
+
+static int omap2xxx_clkdm_clk_enable(struct clockdomain *clkdm)
+{
+ bool hwsup = false;
+
+ if (!clkdm->clktrctrl_mask)
+ return 0;
+
+ hwsup = omap2xxx_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+ clkdm->clktrctrl_mask);
+
+ if (hwsup) {
+ /* Disable HW transitions when we are changing deps */
+ omap2xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+ clkdm->clktrctrl_mask);
+ _clkdm_add_autodeps(clkdm);
+ omap2xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+ clkdm->clktrctrl_mask);
+ } else {
+ if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
+ omap2xxx_clkdm_wakeup(clkdm);
+ }
+
+ return 0;
+}
+
+static int omap2xxx_clkdm_clk_disable(struct clockdomain *clkdm)
+{
+ bool hwsup = false;
+
+ if (!clkdm->clktrctrl_mask)
+ return 0;
+
+ hwsup = omap2xxx_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+ clkdm->clktrctrl_mask);
+
+ if (hwsup) {
+ /* Disable HW transitions when we are changing deps */
+ omap2xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+ clkdm->clktrctrl_mask);
+ _clkdm_del_autodeps(clkdm);
+ omap2xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+ clkdm->clktrctrl_mask);
+ } else {
+ if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP)
+ omap2xxx_clkdm_sleep(clkdm);
+ }
+
+ return 0;
+}
+
+struct clkdm_ops omap2_clkdm_operations = {
+ .clkdm_add_wkdep = omap2_clkdm_add_wkdep,
+ .clkdm_del_wkdep = omap2_clkdm_del_wkdep,
+ .clkdm_read_wkdep = omap2_clkdm_read_wkdep,
+ .clkdm_clear_all_wkdeps = omap2_clkdm_clear_all_wkdeps,
+ .clkdm_sleep = omap2xxx_clkdm_sleep,
+ .clkdm_wakeup = omap2xxx_clkdm_wakeup,
+ .clkdm_allow_idle = omap2xxx_clkdm_allow_idle,
+ .clkdm_deny_idle = omap2xxx_clkdm_deny_idle,
+ .clkdm_clk_enable = omap2xxx_clkdm_clk_enable,
+ .clkdm_clk_disable = omap2xxx_clkdm_clk_disable,
+};
+
+/*
+ *
+ */
+
+static struct cm_ll_data omap2xxx_cm_ll_data = {
+ .split_idlest_reg = &omap2xxx_cm_split_idlest_reg,
+ .wait_module_ready = &omap2xxx_cm_wait_module_ready,
+};
+
+int __init omap2xxx_cm_init(void)
+{
+ if (!cpu_is_omap24xx())
+ return 0;
+
+ return cm_register(&omap2xxx_cm_ll_data);
+}
+
+static void __exit omap2xxx_cm_exit(void)
+{
+ if (!cpu_is_omap24xx())
+ return;
+
+ /* Should never happen */
+ WARN(cm_unregister(&omap2xxx_cm_ll_data),
+ "%s: cm_ll_data function pointer mismatch\n", __func__);
+}
+__exitcall(omap2xxx_cm_exit);
diff --git a/arch/arm/mach-omap2/cm2xxx.h b/arch/arm/mach-omap2/cm2xxx.h
new file mode 100644
index 0000000..4cbb39b
--- /dev/null
+++ b/arch/arm/mach-omap2/cm2xxx.h
@@ -0,0 +1,70 @@
+/*
+ * OMAP2xxx Clock Management (CM) register definitions
+ *
+ * Copyright (C) 2007-2009, 2012 Texas Instruments, Inc.
+ * Copyright (C) 2007-2010 Nokia Corporation
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * The CM hardware modules on the OMAP2/3 are quite similar to each
+ * other. The CM modules/instances on OMAP4 are quite different, so
+ * they are handled in a separate file.
+ */
+#ifndef __ARCH_ASM_MACH_OMAP2_CM2XXX_H
+#define __ARCH_ASM_MACH_OMAP2_CM2XXX_H
+
+#include "prcm-common.h"
+#include "cm2xxx_3xxx.h"
+
+#define OMAP2420_CM_REGADDR(module, reg) \
+ OMAP2_L4_IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg))
+#define OMAP2430_CM_REGADDR(module, reg) \
+ OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE + (module) + (reg))
+
+/*
+ * Module specific CM register offsets from CM_BASE + domain offset
+ * Use cm_{read,write}_mod_reg() with these registers.
+ * These register offsets generally appear in more than one PRCM submodule.
+ */
+
+/* OMAP2-specific register offsets */
+
+#define OMAP24XX_CM_FCLKEN2 0x0004
+#define OMAP24XX_CM_ICLKEN4 0x001c
+#define OMAP24XX_CM_AUTOIDLE4 0x003c
+#define OMAP24XX_CM_IDLEST4 0x002c
+
+/* CM_IDLEST bit field values to indicate deasserted IdleReq */
+
+#define OMAP24XX_CM_IDLEST_VAL 0
+
+
+/* Clock management domain register get/set */
+
+#ifndef __ASSEMBLER__
+
+extern void omap2xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask);
+extern void omap2xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask);
+
+extern void omap2xxx_cm_set_dpll_disable_autoidle(void);
+extern void omap2xxx_cm_set_dpll_auto_low_power_stop(void);
+
+extern void omap2xxx_cm_set_apll54_disable_autoidle(void);
+extern void omap2xxx_cm_set_apll54_auto_low_power_stop(void);
+extern void omap2xxx_cm_set_apll96_disable_autoidle(void);
+extern void omap2xxx_cm_set_apll96_auto_low_power_stop(void);
+
+extern bool omap2xxx_cm_is_clkdm_in_hwsup(s16 module, u32 mask);
+extern int omap2xxx_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id,
+ u8 idlest_shift);
+extern int omap2xxx_cm_split_idlest_reg(void __iomem *idlest_reg,
+ s16 *prcm_inst, u8 *idlest_reg_id);
+
+extern int __init omap2xxx_cm_init(void);
+
+#endif
+
+#endif
diff --git a/arch/arm/mach-omap2/cm2xxx_3xxx.h b/arch/arm/mach-omap2/cm2xxx_3xxx.h
index 57b2f3c..98e6b3c 100644
--- a/arch/arm/mach-omap2/cm2xxx_3xxx.h
+++ b/arch/arm/mach-omap2/cm2xxx_3xxx.h
@@ -16,28 +16,7 @@
#ifndef __ARCH_ASM_MACH_OMAP2_CM2XXX_3XXX_H
#define __ARCH_ASM_MACH_OMAP2_CM2XXX_3XXX_H
-#include "prcm-common.h"
-
-#define OMAP2420_CM_REGADDR(module, reg) \
- OMAP2_L4_IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg))
-#define OMAP2430_CM_REGADDR(module, reg) \
- OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE + (module) + (reg))
-#define OMAP34XX_CM_REGADDR(module, reg) \
- OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE + (module) + (reg))
-
-
-/*
- * OMAP3-specific global CM registers
- * Use cm_{read,write}_reg() with these registers.
- * These registers appear once per CM module.
- */
-
-#define OMAP3430_CM_REVISION OMAP34XX_CM_REGADDR(OCP_MOD, 0x0000)
-#define OMAP3430_CM_SYSCONFIG OMAP34XX_CM_REGADDR(OCP_MOD, 0x0010)
-#define OMAP3430_CM_POLCTRL OMAP34XX_CM_REGADDR(OCP_MOD, 0x009c)
-
-#define OMAP3_CM_CLKOUT_CTRL_OFFSET 0x0070
-#define OMAP3430_CM_CLKOUT_CTRL OMAP_CM_REGADDR(OMAP3430_CCR_MOD, 0x0070)
+#include "cm.h"
/*
* Module specific CM register offsets from CM_BASE + domain offset
@@ -57,6 +36,7 @@
#define CM_IDLEST 0x0020
#define CM_IDLEST1 CM_IDLEST
#define CM_IDLEST2 0x0024
+#define OMAP2430_CM_IDLEST3 0x0028
#define CM_AUTOIDLE 0x0030
#define CM_AUTOIDLE1 CM_AUTOIDLE
#define CM_AUTOIDLE2 0x0034
@@ -66,70 +46,60 @@
#define CM_CLKSEL2 0x0044
#define OMAP2_CM_CLKSTCTRL 0x0048
-/* OMAP2-specific register offsets */
-
-#define OMAP24XX_CM_FCLKEN2 0x0004
-#define OMAP24XX_CM_ICLKEN4 0x001c
-#define OMAP24XX_CM_AUTOIDLE4 0x003c
-#define OMAP24XX_CM_IDLEST4 0x002c
-
-#define OMAP2430_CM_IDLEST3 0x0028
-
-/* OMAP3-specific register offsets */
-
-#define OMAP3430_CM_CLKEN_PLL 0x0004
-#define OMAP3430ES2_CM_CLKEN2 0x0004
-#define OMAP3430ES2_CM_FCLKEN3 0x0008
-#define OMAP3430_CM_IDLEST_PLL CM_IDLEST2
-#define OMAP3430_CM_AUTOIDLE_PLL CM_AUTOIDLE2
-#define OMAP3430ES2_CM_AUTOIDLE2_PLL CM_AUTOIDLE2
-#define OMAP3430_CM_CLKSEL1 CM_CLKSEL
-#define OMAP3430_CM_CLKSEL1_PLL CM_CLKSEL
-#define OMAP3430_CM_CLKSEL2_PLL CM_CLKSEL2
-#define OMAP3430_CM_SLEEPDEP CM_CLKSEL2
-#define OMAP3430_CM_CLKSEL3 OMAP2_CM_CLKSTCTRL
-#define OMAP3430_CM_CLKSTST 0x004c
-#define OMAP3430ES2_CM_CLKSEL4 0x004c
-#define OMAP3430ES2_CM_CLKSEL5 0x0050
-#define OMAP3430_CM_CLKSEL2_EMU 0x0050
-#define OMAP3430_CM_CLKSEL3_EMU 0x0054
-
-
-/* CM_IDLEST bit field values to indicate deasserted IdleReq */
-
-#define OMAP24XX_CM_IDLEST_VAL 0
-#define OMAP34XX_CM_IDLEST_VAL 1
-
-
-/* Clock management domain register get/set */
-
#ifndef __ASSEMBLER__
-extern u32 omap2_cm_read_mod_reg(s16 module, u16 idx);
-extern void omap2_cm_write_mod_reg(u32 val, s16 module, u16 idx);
-extern u32 omap2_cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx);
+#include <linux/io.h>
-extern int omap2_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id,
- u8 idlest_shift);
-extern u32 omap2_cm_set_mod_reg_bits(u32 bits, s16 module, s16 idx);
-extern u32 omap2_cm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx);
+static inline u32 omap2_cm_read_mod_reg(s16 module, u16 idx)
+{
+ return __raw_readl(cm_base + module + idx);
+}
-extern bool omap2_cm_is_clkdm_in_hwsup(s16 module, u32 mask);
-extern void omap2xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask);
-extern void omap2xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask);
+static inline void omap2_cm_write_mod_reg(u32 val, s16 module, u16 idx)
+{
+ __raw_writel(val, cm_base + module + idx);
+}
-extern void omap3xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask);
-extern void omap3xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask);
-extern void omap3xxx_cm_clkdm_force_sleep(s16 module, u32 mask);
-extern void omap3xxx_cm_clkdm_force_wakeup(s16 module, u32 mask);
+/* Read-modify-write a register in a CM module. Caller must lock */
+static inline u32 omap2_cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module,
+ s16 idx)
+{
+ u32 v;
-extern void omap2xxx_cm_set_dpll_disable_autoidle(void);
-extern void omap2xxx_cm_set_dpll_auto_low_power_stop(void);
+ v = omap2_cm_read_mod_reg(module, idx);
+ v &= ~mask;
+ v |= bits;
+ omap2_cm_write_mod_reg(v, module, idx);
-extern void omap2xxx_cm_set_apll54_disable_autoidle(void);
-extern void omap2xxx_cm_set_apll54_auto_low_power_stop(void);
-extern void omap2xxx_cm_set_apll96_disable_autoidle(void);
-extern void omap2xxx_cm_set_apll96_auto_low_power_stop(void);
+ return v;
+}
+
+/* Read a CM register, AND it, and shift the result down to bit 0 */
+static inline u32 omap2_cm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask)
+{
+ u32 v;
+
+ v = omap2_cm_read_mod_reg(domain, idx);
+ v &= mask;
+ v >>= __ffs(mask);
+
+ return v;
+}
+
+static inline u32 omap2_cm_set_mod_reg_bits(u32 bits, s16 module, s16 idx)
+{
+ return omap2_cm_rmw_mod_reg_bits(bits, bits, module, idx);
+}
+
+static inline u32 omap2_cm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
+{
+ return omap2_cm_rmw_mod_reg_bits(bits, 0x0, module, idx);
+}
+
+extern int omap2xxx_cm_apll54_enable(void);
+extern void omap2xxx_cm_apll54_disable(void);
+extern int omap2xxx_cm_apll96_enable(void);
+extern void omap2xxx_cm_apll96_disable(void);
#endif
@@ -146,11 +116,4 @@
/* CM_IDLEST_GFX */
#define OMAP_ST_GFX_MASK (1 << 0)
-
-/* Function prototypes */
-# ifndef __ASSEMBLER__
-extern void omap3_cm_save_context(void);
-extern void omap3_cm_restore_context(void);
-# endif
-
#endif
diff --git a/arch/arm/mach-omap2/cm33xx.c b/arch/arm/mach-omap2/cm33xx.c
index 13f56ea..058ce3c 100644
--- a/arch/arm/mach-omap2/cm33xx.c
+++ b/arch/arm/mach-omap2/cm33xx.c
@@ -22,8 +22,7 @@
#include <linux/err.h>
#include <linux/io.h>
-#include <plat/common.h>
-
+#include "clockdomain.h"
#include "cm.h"
#include "cm33xx.h"
#include "cm-regbits-34xx.h"
@@ -311,3 +310,58 @@
v &= ~AM33XX_MODULEMODE_MASK;
am33xx_cm_write_reg(v, inst, clkctrl_offs);
}
+
+/*
+ * Clockdomain low-level functions
+ */
+
+static int am33xx_clkdm_sleep(struct clockdomain *clkdm)
+{
+ am33xx_cm_clkdm_force_sleep(clkdm->cm_inst, clkdm->clkdm_offs);
+ return 0;
+}
+
+static int am33xx_clkdm_wakeup(struct clockdomain *clkdm)
+{
+ am33xx_cm_clkdm_force_wakeup(clkdm->cm_inst, clkdm->clkdm_offs);
+ return 0;
+}
+
+static void am33xx_clkdm_allow_idle(struct clockdomain *clkdm)
+{
+ am33xx_cm_clkdm_enable_hwsup(clkdm->cm_inst, clkdm->clkdm_offs);
+}
+
+static void am33xx_clkdm_deny_idle(struct clockdomain *clkdm)
+{
+ am33xx_cm_clkdm_disable_hwsup(clkdm->cm_inst, clkdm->clkdm_offs);
+}
+
+static int am33xx_clkdm_clk_enable(struct clockdomain *clkdm)
+{
+ if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
+ return am33xx_clkdm_wakeup(clkdm);
+
+ return 0;
+}
+
+static int am33xx_clkdm_clk_disable(struct clockdomain *clkdm)
+{
+ bool hwsup = false;
+
+ hwsup = am33xx_cm_is_clkdm_in_hwsup(clkdm->cm_inst, clkdm->clkdm_offs);
+
+ if (!hwsup && (clkdm->flags & CLKDM_CAN_FORCE_SLEEP))
+ am33xx_clkdm_sleep(clkdm);
+
+ return 0;
+}
+
+struct clkdm_ops am33xx_clkdm_operations = {
+ .clkdm_sleep = am33xx_clkdm_sleep,
+ .clkdm_wakeup = am33xx_clkdm_wakeup,
+ .clkdm_allow_idle = am33xx_clkdm_allow_idle,
+ .clkdm_deny_idle = am33xx_clkdm_deny_idle,
+ .clkdm_clk_enable = am33xx_clkdm_clk_enable,
+ .clkdm_clk_disable = am33xx_clkdm_clk_disable,
+};
diff --git a/arch/arm/mach-omap2/cm2xxx_3xxx.c b/arch/arm/mach-omap2/cm3xxx.c
similarity index 67%
rename from arch/arm/mach-omap2/cm2xxx_3xxx.c
rename to arch/arm/mach-omap2/cm3xxx.c
index 7f07ab0..c2086f2 100644
--- a/arch/arm/mach-omap2/cm2xxx_3xxx.c
+++ b/arch/arm/mach-omap2/cm3xxx.c
@@ -1,8 +1,10 @@
/*
- * OMAP2/3 CM module functions
+ * OMAP3xxx CM module functions
*
* Copyright (C) 2009 Nokia Corporation
+ * Copyright (C) 2008-2010, 2012 Texas Instruments, Inc.
* Paul Walmsley
+ * Rajendra Nayak <rnayak@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -12,8 +14,6 @@
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/delay.h>
-#include <linux/spinlock.h>
-#include <linux/list.h>
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/io.h>
@@ -21,56 +21,16 @@
#include "soc.h"
#include "iomap.h"
#include "common.h"
+#include "prm2xxx_3xxx.h"
#include "cm.h"
-#include "cm2xxx_3xxx.h"
-#include "cm-regbits-24xx.h"
+#include "cm3xxx.h"
#include "cm-regbits-34xx.h"
+#include "clockdomain.h"
-/* CM_AUTOIDLE_PLL.AUTO_* bit values for DPLLs */
-#define DPLL_AUTOIDLE_DISABLE 0x0
-#define OMAP2XXX_DPLL_AUTOIDLE_LOW_POWER_STOP 0x3
-
-/* CM_AUTOIDLE_PLL.AUTO_* bit values for APLLs (OMAP2xxx only) */
-#define OMAP2XXX_APLL_AUTOIDLE_DISABLE 0x0
-#define OMAP2XXX_APLL_AUTOIDLE_LOW_POWER_STOP 0x3
-
-static const u8 cm_idlest_offs[] = {
- CM_IDLEST1, CM_IDLEST2, OMAP2430_CM_IDLEST3, OMAP24XX_CM_IDLEST4
+static const u8 omap3xxx_cm_idlest_offs[] = {
+ CM_IDLEST1, CM_IDLEST2, OMAP2430_CM_IDLEST3
};
-u32 omap2_cm_read_mod_reg(s16 module, u16 idx)
-{
- return __raw_readl(cm_base + module + idx);
-}
-
-void omap2_cm_write_mod_reg(u32 val, s16 module, u16 idx)
-{
- __raw_writel(val, cm_base + module + idx);
-}
-
-/* Read-modify-write a register in a CM module. Caller must lock */
-u32 omap2_cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx)
-{
- u32 v;
-
- v = omap2_cm_read_mod_reg(module, idx);
- v &= ~mask;
- v |= bits;
- omap2_cm_write_mod_reg(v, module, idx);
-
- return v;
-}
-
-u32 omap2_cm_set_mod_reg_bits(u32 bits, s16 module, s16 idx)
-{
- return omap2_cm_rmw_mod_reg_bits(bits, bits, module, idx);
-}
-
-u32 omap2_cm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
-{
- return omap2_cm_rmw_mod_reg_bits(bits, 0x0, module, idx);
-}
-
/*
*
*/
@@ -85,33 +45,15 @@
omap2_cm_write_mod_reg(v, module, OMAP2_CM_CLKSTCTRL);
}
-bool omap2_cm_is_clkdm_in_hwsup(s16 module, u32 mask)
+bool omap3xxx_cm_is_clkdm_in_hwsup(s16 module, u32 mask)
{
u32 v;
- bool ret = 0;
-
- BUG_ON(!cpu_is_omap24xx() && !cpu_is_omap34xx());
v = omap2_cm_read_mod_reg(module, OMAP2_CM_CLKSTCTRL);
v &= mask;
v >>= __ffs(mask);
- if (cpu_is_omap24xx())
- ret = (v == OMAP24XX_CLKSTCTRL_ENABLE_AUTO) ? 1 : 0;
- else
- ret = (v == OMAP34XX_CLKSTCTRL_ENABLE_AUTO) ? 1 : 0;
-
- return ret;
-}
-
-void omap2xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask)
-{
- _write_clktrctrl(OMAP24XX_CLKSTCTRL_ENABLE_AUTO, module, mask);
-}
-
-void omap2xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask)
-{
- _write_clktrctrl(OMAP24XX_CLKSTCTRL_DISABLE_AUTO, module, mask);
+ return (v == OMAP34XX_CLKSTCTRL_ENABLE_AUTO) ? 1 : 0;
}
void omap3xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask)
@@ -135,109 +77,247 @@
}
/*
- * DPLL autoidle control
- */
-
-static void _omap2xxx_set_dpll_autoidle(u8 m)
-{
- u32 v;
-
- v = omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE);
- v &= ~OMAP24XX_AUTO_DPLL_MASK;
- v |= m << OMAP24XX_AUTO_DPLL_SHIFT;
- omap2_cm_write_mod_reg(v, PLL_MOD, CM_AUTOIDLE);
-}
-
-void omap2xxx_cm_set_dpll_disable_autoidle(void)
-{
- _omap2xxx_set_dpll_autoidle(OMAP2XXX_DPLL_AUTOIDLE_LOW_POWER_STOP);
-}
-
-void omap2xxx_cm_set_dpll_auto_low_power_stop(void)
-{
- _omap2xxx_set_dpll_autoidle(DPLL_AUTOIDLE_DISABLE);
-}
-
-/*
- * APLL autoidle control
- */
-
-static void _omap2xxx_set_apll_autoidle(u8 m, u32 mask)
-{
- u32 v;
-
- v = omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE);
- v &= ~mask;
- v |= m << __ffs(mask);
- omap2_cm_write_mod_reg(v, PLL_MOD, CM_AUTOIDLE);
-}
-
-void omap2xxx_cm_set_apll54_disable_autoidle(void)
-{
- _omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_LOW_POWER_STOP,
- OMAP24XX_AUTO_54M_MASK);
-}
-
-void omap2xxx_cm_set_apll54_auto_low_power_stop(void)
-{
- _omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_DISABLE,
- OMAP24XX_AUTO_54M_MASK);
-}
-
-void omap2xxx_cm_set_apll96_disable_autoidle(void)
-{
- _omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_LOW_POWER_STOP,
- OMAP24XX_AUTO_96M_MASK);
-}
-
-void omap2xxx_cm_set_apll96_auto_low_power_stop(void)
-{
- _omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_DISABLE,
- OMAP24XX_AUTO_96M_MASK);
-}
-
-/*
*
*/
/**
- * omap2_cm_wait_idlest_ready - wait for a module to leave idle or standby
+ * omap3xxx_cm_wait_module_ready - wait for a module to leave idle or standby
* @prcm_mod: PRCM module offset
* @idlest_id: CM_IDLESTx register ID (i.e., x = 1, 2, 3)
* @idlest_shift: shift of the bit in the CM_IDLEST* register to check
*
- * XXX document
+ * Wait for the PRCM to indicate that the module identified by
+ * (@prcm_mod, @idlest_id, @idlest_shift) is clocked. Return 0 upon
+ * success or -EBUSY if the module doesn't enable in time.
*/
-int omap2_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift)
+int omap3xxx_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift)
{
int ena = 0, i = 0;
u8 cm_idlest_reg;
u32 mask;
- if (!idlest_id || (idlest_id > ARRAY_SIZE(cm_idlest_offs)))
+ if (!idlest_id || (idlest_id > ARRAY_SIZE(omap3xxx_cm_idlest_offs)))
return -EINVAL;
- cm_idlest_reg = cm_idlest_offs[idlest_id - 1];
+ cm_idlest_reg = omap3xxx_cm_idlest_offs[idlest_id - 1];
mask = 1 << idlest_shift;
+ ena = 0;
- if (cpu_is_omap24xx())
- ena = mask;
- else if (cpu_is_omap34xx())
- ena = 0;
- else
- BUG();
-
- omap_test_timeout(((omap2_cm_read_mod_reg(prcm_mod, cm_idlest_reg) & mask) == ena),
- MAX_MODULE_READY_TIME, i);
+ omap_test_timeout(((omap2_cm_read_mod_reg(prcm_mod, cm_idlest_reg) &
+ mask) == ena), MAX_MODULE_READY_TIME, i);
return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY;
}
+/**
+ * omap3xxx_cm_split_idlest_reg - split CM_IDLEST reg addr into its components
+ * @idlest_reg: CM_IDLEST* virtual address
+ * @prcm_inst: pointer to an s16 to return the PRCM instance offset
+ * @idlest_reg_id: pointer to a u8 to return the CM_IDLESTx register ID
+ *
+ * XXX This function is only needed until absolute register addresses are
+ * removed from the OMAP struct clk records.
+ */
+int omap3xxx_cm_split_idlest_reg(void __iomem *idlest_reg, s16 *prcm_inst,
+ u8 *idlest_reg_id)
+{
+ unsigned long offs;
+ u8 idlest_offs;
+ int i;
+
+ if (idlest_reg < (cm_base + OMAP3430_IVA2_MOD) ||
+ idlest_reg > (cm_base + 0x1ffff))
+ return -EINVAL;
+
+ idlest_offs = (unsigned long)idlest_reg & 0xff;
+ for (i = 0; i < ARRAY_SIZE(omap3xxx_cm_idlest_offs); i++) {
+ if (idlest_offs == omap3xxx_cm_idlest_offs[i]) {
+ *idlest_reg_id = i + 1;
+ break;
+ }
+ }
+
+ if (i == ARRAY_SIZE(omap3xxx_cm_idlest_offs))
+ return -EINVAL;
+
+ offs = idlest_reg - cm_base;
+ offs &= 0xff00;
+ *prcm_inst = offs;
+
+ return 0;
+}
+
+/* Clockdomain low-level operations */
+
+static int omap3xxx_clkdm_add_sleepdep(struct clockdomain *clkdm1,
+ struct clockdomain *clkdm2)
+{
+ omap2_cm_set_mod_reg_bits((1 << clkdm2->dep_bit),
+ clkdm1->pwrdm.ptr->prcm_offs,
+ OMAP3430_CM_SLEEPDEP);
+ return 0;
+}
+
+static int omap3xxx_clkdm_del_sleepdep(struct clockdomain *clkdm1,
+ struct clockdomain *clkdm2)
+{
+ omap2_cm_clear_mod_reg_bits((1 << clkdm2->dep_bit),
+ clkdm1->pwrdm.ptr->prcm_offs,
+ OMAP3430_CM_SLEEPDEP);
+ return 0;
+}
+
+static int omap3xxx_clkdm_read_sleepdep(struct clockdomain *clkdm1,
+ struct clockdomain *clkdm2)
+{
+ return omap2_cm_read_mod_bits_shift(clkdm1->pwrdm.ptr->prcm_offs,
+ OMAP3430_CM_SLEEPDEP,
+ (1 << clkdm2->dep_bit));
+}
+
+static int omap3xxx_clkdm_clear_all_sleepdeps(struct clockdomain *clkdm)
+{
+ struct clkdm_dep *cd;
+ u32 mask = 0;
+
+ for (cd = clkdm->sleepdep_srcs; cd && cd->clkdm_name; cd++) {
+ if (!cd->clkdm)
+ continue; /* only happens if data is erroneous */
+
+ mask |= 1 << cd->clkdm->dep_bit;
+ atomic_set(&cd->sleepdep_usecount, 0);
+ }
+ omap2_cm_clear_mod_reg_bits(mask, clkdm->pwrdm.ptr->prcm_offs,
+ OMAP3430_CM_SLEEPDEP);
+ return 0;
+}
+
+static int omap3xxx_clkdm_sleep(struct clockdomain *clkdm)
+{
+ omap3xxx_cm_clkdm_force_sleep(clkdm->pwrdm.ptr->prcm_offs,
+ clkdm->clktrctrl_mask);
+ return 0;
+}
+
+static int omap3xxx_clkdm_wakeup(struct clockdomain *clkdm)
+{
+ omap3xxx_cm_clkdm_force_wakeup(clkdm->pwrdm.ptr->prcm_offs,
+ clkdm->clktrctrl_mask);
+ return 0;
+}
+
+static void omap3xxx_clkdm_allow_idle(struct clockdomain *clkdm)
+{
+ if (atomic_read(&clkdm->usecount) > 0)
+ _clkdm_add_autodeps(clkdm);
+
+ omap3xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+ clkdm->clktrctrl_mask);
+}
+
+static void omap3xxx_clkdm_deny_idle(struct clockdomain *clkdm)
+{
+ omap3xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+ clkdm->clktrctrl_mask);
+
+ if (atomic_read(&clkdm->usecount) > 0)
+ _clkdm_del_autodeps(clkdm);
+}
+
+static int omap3xxx_clkdm_clk_enable(struct clockdomain *clkdm)
+{
+ bool hwsup = false;
+
+ if (!clkdm->clktrctrl_mask)
+ return 0;
+
+ /*
+ * The CLKDM_MISSING_IDLE_REPORTING flag documentation has
+ * more details on the unpleasant problem this is working
+ * around
+ */
+ if ((clkdm->flags & CLKDM_MISSING_IDLE_REPORTING) &&
+ (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)) {
+ omap3xxx_clkdm_wakeup(clkdm);
+ return 0;
+ }
+
+ hwsup = omap3xxx_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+ clkdm->clktrctrl_mask);
+
+ if (hwsup) {
+ /* Disable HW transitions when we are changing deps */
+ omap3xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+ clkdm->clktrctrl_mask);
+ _clkdm_add_autodeps(clkdm);
+ omap3xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+ clkdm->clktrctrl_mask);
+ } else {
+ if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
+ omap3xxx_clkdm_wakeup(clkdm);
+ }
+
+ return 0;
+}
+
+static int omap3xxx_clkdm_clk_disable(struct clockdomain *clkdm)
+{
+ bool hwsup = false;
+
+ if (!clkdm->clktrctrl_mask)
+ return 0;
+
+ /*
+ * The CLKDM_MISSING_IDLE_REPORTING flag documentation has
+ * more details on the unpleasant problem this is working
+ * around
+ */
+ if (clkdm->flags & CLKDM_MISSING_IDLE_REPORTING &&
+ !(clkdm->flags & CLKDM_CAN_FORCE_SLEEP)) {
+ omap3xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+ clkdm->clktrctrl_mask);
+ return 0;
+ }
+
+ hwsup = omap3xxx_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+ clkdm->clktrctrl_mask);
+
+ if (hwsup) {
+ /* Disable HW transitions when we are changing deps */
+ omap3xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+ clkdm->clktrctrl_mask);
+ _clkdm_del_autodeps(clkdm);
+ omap3xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+ clkdm->clktrctrl_mask);
+ } else {
+ if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP)
+ omap3xxx_clkdm_sleep(clkdm);
+ }
+
+ return 0;
+}
+
+struct clkdm_ops omap3_clkdm_operations = {
+ .clkdm_add_wkdep = omap2_clkdm_add_wkdep,
+ .clkdm_del_wkdep = omap2_clkdm_del_wkdep,
+ .clkdm_read_wkdep = omap2_clkdm_read_wkdep,
+ .clkdm_clear_all_wkdeps = omap2_clkdm_clear_all_wkdeps,
+ .clkdm_add_sleepdep = omap3xxx_clkdm_add_sleepdep,
+ .clkdm_del_sleepdep = omap3xxx_clkdm_del_sleepdep,
+ .clkdm_read_sleepdep = omap3xxx_clkdm_read_sleepdep,
+ .clkdm_clear_all_sleepdeps = omap3xxx_clkdm_clear_all_sleepdeps,
+ .clkdm_sleep = omap3xxx_clkdm_sleep,
+ .clkdm_wakeup = omap3xxx_clkdm_wakeup,
+ .clkdm_allow_idle = omap3xxx_clkdm_allow_idle,
+ .clkdm_deny_idle = omap3xxx_clkdm_deny_idle,
+ .clkdm_clk_enable = omap3xxx_clkdm_clk_enable,
+ .clkdm_clk_disable = omap3xxx_clkdm_clk_disable,
+};
+
/*
* Context save/restore code - OMAP3 only
*/
-#ifdef CONFIG_ARCH_OMAP3
struct omap3_cm_regs {
u32 iva2_cm_clksel1;
u32 iva2_cm_clksel2;
@@ -555,4 +635,31 @@
omap2_cm_write_mod_reg(cm_context.cm_clkout_ctrl, OMAP3430_CCR_MOD,
OMAP3_CM_CLKOUT_CTRL_OFFSET);
}
-#endif
+
+/*
+ *
+ */
+
+static struct cm_ll_data omap3xxx_cm_ll_data = {
+ .split_idlest_reg = &omap3xxx_cm_split_idlest_reg,
+ .wait_module_ready = &omap3xxx_cm_wait_module_ready,
+};
+
+int __init omap3xxx_cm_init(void)
+{
+ if (!cpu_is_omap34xx())
+ return 0;
+
+ return cm_register(&omap3xxx_cm_ll_data);
+}
+
+static void __exit omap3xxx_cm_exit(void)
+{
+ if (!cpu_is_omap34xx())
+ return;
+
+ /* Should never happen */
+ WARN(cm_unregister(&omap3xxx_cm_ll_data),
+ "%s: cm_ll_data function pointer mismatch\n", __func__);
+}
+__exitcall(omap3xxx_cm_exit);
diff --git a/arch/arm/mach-omap2/cm3xxx.h b/arch/arm/mach-omap2/cm3xxx.h
new file mode 100644
index 0000000..e8e146f
--- /dev/null
+++ b/arch/arm/mach-omap2/cm3xxx.h
@@ -0,0 +1,91 @@
+/*
+ * OMAP2/3 Clock Management (CM) register definitions
+ *
+ * Copyright (C) 2007-2009 Texas Instruments, Inc.
+ * Copyright (C) 2007-2010 Nokia Corporation
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * The CM hardware modules on the OMAP2/3 are quite similar to each
+ * other. The CM modules/instances on OMAP4 are quite different, so
+ * they are handled in a separate file.
+ */
+#ifndef __ARCH_ASM_MACH_OMAP2_CM3XXX_H
+#define __ARCH_ASM_MACH_OMAP2_CM3XXX_H
+
+#include "prcm-common.h"
+#include "cm2xxx_3xxx.h"
+
+#define OMAP34XX_CM_REGADDR(module, reg) \
+ OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE + (module) + (reg))
+
+
+/*
+ * OMAP3-specific global CM registers
+ * Use cm_{read,write}_reg() with these registers.
+ * These registers appear once per CM module.
+ */
+
+#define OMAP3430_CM_REVISION OMAP34XX_CM_REGADDR(OCP_MOD, 0x0000)
+#define OMAP3430_CM_SYSCONFIG OMAP34XX_CM_REGADDR(OCP_MOD, 0x0010)
+#define OMAP3430_CM_POLCTRL OMAP34XX_CM_REGADDR(OCP_MOD, 0x009c)
+
+#define OMAP3_CM_CLKOUT_CTRL_OFFSET 0x0070
+#define OMAP3430_CM_CLKOUT_CTRL OMAP_CM_REGADDR(OMAP3430_CCR_MOD, 0x0070)
+
+/*
+ * Module specific CM register offsets from CM_BASE + domain offset
+ * Use cm_{read,write}_mod_reg() with these registers.
+ * These register offsets generally appear in more than one PRCM submodule.
+ */
+
+/* OMAP3-specific register offsets */
+
+#define OMAP3430_CM_CLKEN_PLL 0x0004
+#define OMAP3430ES2_CM_CLKEN2 0x0004
+#define OMAP3430ES2_CM_FCLKEN3 0x0008
+#define OMAP3430_CM_IDLEST_PLL CM_IDLEST2
+#define OMAP3430_CM_AUTOIDLE_PLL CM_AUTOIDLE2
+#define OMAP3430ES2_CM_AUTOIDLE2_PLL CM_AUTOIDLE2
+#define OMAP3430_CM_CLKSEL1 CM_CLKSEL
+#define OMAP3430_CM_CLKSEL1_PLL CM_CLKSEL
+#define OMAP3430_CM_CLKSEL2_PLL CM_CLKSEL2
+#define OMAP3430_CM_SLEEPDEP CM_CLKSEL2
+#define OMAP3430_CM_CLKSEL3 OMAP2_CM_CLKSTCTRL
+#define OMAP3430_CM_CLKSTST 0x004c
+#define OMAP3430ES2_CM_CLKSEL4 0x004c
+#define OMAP3430ES2_CM_CLKSEL5 0x0050
+#define OMAP3430_CM_CLKSEL2_EMU 0x0050
+#define OMAP3430_CM_CLKSEL3_EMU 0x0054
+
+
+/* CM_IDLEST bit field values to indicate deasserted IdleReq */
+
+#define OMAP34XX_CM_IDLEST_VAL 1
+
+
+#ifndef __ASSEMBLER__
+
+extern void omap3xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask);
+extern void omap3xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask);
+extern void omap3xxx_cm_clkdm_force_sleep(s16 module, u32 mask);
+extern void omap3xxx_cm_clkdm_force_wakeup(s16 module, u32 mask);
+
+extern bool omap3xxx_cm_is_clkdm_in_hwsup(s16 module, u32 mask);
+extern int omap3xxx_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id,
+ u8 idlest_shift);
+
+extern int omap3xxx_cm_split_idlest_reg(void __iomem *idlest_reg,
+ s16 *prcm_inst, u8 *idlest_reg_id);
+
+extern void omap3_cm_save_context(void);
+extern void omap3_cm_restore_context(void);
+
+extern int __init omap3xxx_cm_init(void);
+
+#endif
+
+#endif
diff --git a/arch/arm/mach-omap2/cm_common.c b/arch/arm/mach-omap2/cm_common.c
new file mode 100644
index 0000000..40b3b5a
--- /dev/null
+++ b/arch/arm/mach-omap2/cm_common.c
@@ -0,0 +1,140 @@
+/*
+ * OMAP2+ common Clock Management (CM) IP block functions
+ *
+ * Copyright (C) 2012 Texas Instruments, Inc.
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * XXX This code should eventually be moved to a CM driver.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+
+#include "cm2xxx.h"
+#include "cm3xxx.h"
+#include "cm44xx.h"
+#include "common.h"
+
+/*
+ * cm_ll_data: function pointers to SoC-specific implementations of
+ * common CM functions
+ */
+static struct cm_ll_data null_cm_ll_data;
+static struct cm_ll_data *cm_ll_data = &null_cm_ll_data;
+
+/* cm_base: base virtual address of the CM IP block */
+void __iomem *cm_base;
+
+/* cm2_base: base virtual address of the CM2 IP block (OMAP44xx only) */
+void __iomem *cm2_base;
+
+/**
+ * omap2_set_globals_cm - set the CM/CM2 base addresses (for early use)
+ * @cm: CM base virtual address
+ * @cm2: CM2 base virtual address (if present on the booted SoC)
+ *
+ * XXX Will be replaced when the PRM/CM drivers are completed.
+ */
+void __init omap2_set_globals_cm(void __iomem *cm, void __iomem *cm2)
+{
+ cm_base = cm;
+ cm2_base = cm2;
+}
+
+/**
+ * cm_split_idlest_reg - split CM_IDLEST reg addr into its components
+ * @idlest_reg: CM_IDLEST* virtual address
+ * @prcm_inst: pointer to an s16 to return the PRCM instance offset
+ * @idlest_reg_id: pointer to a u8 to return the CM_IDLESTx register ID
+ *
+ * Given an absolute CM_IDLEST register address @idlest_reg, passes
+ * the PRCM instance offset and IDLEST register ID back to the caller
+ * via the @prcm_inst and @idlest_reg_id. Returns -EINVAL upon error,
+ * or 0 upon success. XXX This function is only needed until absolute
+ * register addresses are removed from the OMAP struct clk records.
+ */
+int cm_split_idlest_reg(void __iomem *idlest_reg, s16 *prcm_inst,
+ u8 *idlest_reg_id)
+{
+ if (!cm_ll_data->split_idlest_reg) {
+ WARN_ONCE(1, "cm: %s: no low-level function defined\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ return cm_ll_data->split_idlest_reg(idlest_reg, prcm_inst,
+ idlest_reg_id);
+}
+
+/**
+ * cm_wait_module_ready - wait for a module to leave idle or standby
+ * @prcm_mod: PRCM module offset
+ * @idlest_id: CM_IDLESTx register ID (i.e., x = 1, 2, 3)
+ * @idlest_shift: shift of the bit in the CM_IDLEST* register to check
+ *
+ * Wait for the PRCM to indicate that the module identified by
+ * (@prcm_mod, @idlest_id, @idlest_shift) is clocked. Return 0 upon
+ * success, -EBUSY if the module doesn't enable in time, or -EINVAL if
+ * no per-SoC wait_module_ready() function pointer has been registered
+ * or if the idlest register is unknown on the SoC.
+ */
+int cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift)
+{
+ if (!cm_ll_data->wait_module_ready) {
+ WARN_ONCE(1, "cm: %s: no low-level function defined\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ return cm_ll_data->wait_module_ready(prcm_mod, idlest_id, idlest_shift);
+}
+
+/**
+ * cm_register - register per-SoC low-level data with the CM
+ * @cld: low-level per-SoC OMAP CM data & function pointers to register
+ *
+ * Register per-SoC low-level OMAP CM data and function pointers with
+ * the OMAP CM common interface. The caller must keep the data
+ * pointed to by @cld valid until it calls cm_unregister() and
+ * it returns successfully. Returns 0 upon success, -EINVAL if @cld
+ * is NULL, or -EEXIST if cm_register() has already been called
+ * without an intervening cm_unregister().
+ */
+int cm_register(struct cm_ll_data *cld)
+{
+ if (!cld)
+ return -EINVAL;
+
+ if (cm_ll_data != &null_cm_ll_data)
+ return -EEXIST;
+
+ cm_ll_data = cld;
+
+ return 0;
+}
+
+/**
+ * cm_unregister - unregister per-SoC low-level data & function pointers
+ * @cld: low-level per-SoC OMAP CM data & function pointers to unregister
+ *
+ * Unregister per-SoC low-level OMAP CM data and function pointers
+ * that were previously registered with cm_register(). The
+ * caller may not destroy any of the data pointed to by @cld until
+ * this function returns successfully. Returns 0 upon success, or
+ * -EINVAL if @cld is NULL or if @cld does not match the struct
+ * cm_ll_data * previously registered by cm_register().
+ */
+int cm_unregister(struct cm_ll_data *cld)
+{
+ if (!cld || cm_ll_data != cld)
+ return -EINVAL;
+
+ cm_ll_data = &null_cm_ll_data;
+
+ return 0;
+}
diff --git a/arch/arm/mach-omap2/cminst44xx.c b/arch/arm/mach-omap2/cminst44xx.c
index 1894015..7f9a464 100644
--- a/arch/arm/mach-omap2/cminst44xx.c
+++ b/arch/arm/mach-omap2/cminst44xx.c
@@ -2,8 +2,9 @@
* OMAP4 CM instance functions
*
* Copyright (C) 2009 Nokia Corporation
- * Copyright (C) 2011 Texas Instruments, Inc.
+ * Copyright (C) 2008-2011 Texas Instruments, Inc.
* Paul Walmsley
+ * Rajendra Nayak <rnayak@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -22,6 +23,7 @@
#include "iomap.h"
#include "common.h"
+#include "clockdomain.h"
#include "cm.h"
#include "cm1_44xx.h"
#include "cm2_44xx.h"
@@ -343,3 +345,141 @@
v &= ~OMAP4430_MODULEMODE_MASK;
omap4_cminst_write_inst_reg(v, part, inst, clkctrl_offs);
}
+
+/*
+ * Clockdomain low-level functions
+ */
+
+static int omap4_clkdm_add_wkup_sleep_dep(struct clockdomain *clkdm1,
+ struct clockdomain *clkdm2)
+{
+ omap4_cminst_set_inst_reg_bits((1 << clkdm2->dep_bit),
+ clkdm1->prcm_partition,
+ clkdm1->cm_inst, clkdm1->clkdm_offs +
+ OMAP4_CM_STATICDEP);
+ return 0;
+}
+
+static int omap4_clkdm_del_wkup_sleep_dep(struct clockdomain *clkdm1,
+ struct clockdomain *clkdm2)
+{
+ omap4_cminst_clear_inst_reg_bits((1 << clkdm2->dep_bit),
+ clkdm1->prcm_partition,
+ clkdm1->cm_inst, clkdm1->clkdm_offs +
+ OMAP4_CM_STATICDEP);
+ return 0;
+}
+
+static int omap4_clkdm_read_wkup_sleep_dep(struct clockdomain *clkdm1,
+ struct clockdomain *clkdm2)
+{
+ return omap4_cminst_read_inst_reg_bits(clkdm1->prcm_partition,
+ clkdm1->cm_inst,
+ clkdm1->clkdm_offs +
+ OMAP4_CM_STATICDEP,
+ (1 << clkdm2->dep_bit));
+}
+
+static int omap4_clkdm_clear_all_wkup_sleep_deps(struct clockdomain *clkdm)
+{
+ struct clkdm_dep *cd;
+ u32 mask = 0;
+
+ if (!clkdm->prcm_partition)
+ return 0;
+
+ for (cd = clkdm->wkdep_srcs; cd && cd->clkdm_name; cd++) {
+ if (!cd->clkdm)
+ continue; /* only happens if data is erroneous */
+
+ mask |= 1 << cd->clkdm->dep_bit;
+ atomic_set(&cd->wkdep_usecount, 0);
+ }
+
+ omap4_cminst_clear_inst_reg_bits(mask, clkdm->prcm_partition,
+ clkdm->cm_inst, clkdm->clkdm_offs +
+ OMAP4_CM_STATICDEP);
+ return 0;
+}
+
+static int omap4_clkdm_sleep(struct clockdomain *clkdm)
+{
+ omap4_cminst_clkdm_enable_hwsup(clkdm->prcm_partition,
+ clkdm->cm_inst, clkdm->clkdm_offs);
+ return 0;
+}
+
+static int omap4_clkdm_wakeup(struct clockdomain *clkdm)
+{
+ omap4_cminst_clkdm_force_wakeup(clkdm->prcm_partition,
+ clkdm->cm_inst, clkdm->clkdm_offs);
+ return 0;
+}
+
+static void omap4_clkdm_allow_idle(struct clockdomain *clkdm)
+{
+ omap4_cminst_clkdm_enable_hwsup(clkdm->prcm_partition,
+ clkdm->cm_inst, clkdm->clkdm_offs);
+}
+
+static void omap4_clkdm_deny_idle(struct clockdomain *clkdm)
+{
+ if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
+ omap4_clkdm_wakeup(clkdm);
+ else
+ omap4_cminst_clkdm_disable_hwsup(clkdm->prcm_partition,
+ clkdm->cm_inst,
+ clkdm->clkdm_offs);
+}
+
+static int omap4_clkdm_clk_enable(struct clockdomain *clkdm)
+{
+ if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
+ return omap4_clkdm_wakeup(clkdm);
+
+ return 0;
+}
+
+static int omap4_clkdm_clk_disable(struct clockdomain *clkdm)
+{
+ bool hwsup = false;
+
+ if (!clkdm->prcm_partition)
+ return 0;
+
+ /*
+ * The CLKDM_MISSING_IDLE_REPORTING flag documentation has
+ * more details on the unpleasant problem this is working
+ * around
+ */
+ if (clkdm->flags & CLKDM_MISSING_IDLE_REPORTING &&
+ !(clkdm->flags & CLKDM_CAN_FORCE_SLEEP)) {
+ omap4_clkdm_allow_idle(clkdm);
+ return 0;
+ }
+
+ hwsup = omap4_cminst_is_clkdm_in_hwsup(clkdm->prcm_partition,
+ clkdm->cm_inst, clkdm->clkdm_offs);
+
+ if (!hwsup && (clkdm->flags & CLKDM_CAN_FORCE_SLEEP))
+ omap4_clkdm_sleep(clkdm);
+
+ return 0;
+}
+
+struct clkdm_ops omap4_clkdm_operations = {
+ .clkdm_add_wkdep = omap4_clkdm_add_wkup_sleep_dep,
+ .clkdm_del_wkdep = omap4_clkdm_del_wkup_sleep_dep,
+ .clkdm_read_wkdep = omap4_clkdm_read_wkup_sleep_dep,
+ .clkdm_clear_all_wkdeps = omap4_clkdm_clear_all_wkup_sleep_deps,
+ .clkdm_add_sleepdep = omap4_clkdm_add_wkup_sleep_dep,
+ .clkdm_del_sleepdep = omap4_clkdm_del_wkup_sleep_dep,
+ .clkdm_read_sleepdep = omap4_clkdm_read_wkup_sleep_dep,
+ .clkdm_clear_all_sleepdeps = omap4_clkdm_clear_all_wkup_sleep_deps,
+ .clkdm_sleep = omap4_clkdm_sleep,
+ .clkdm_wakeup = omap4_clkdm_wakeup,
+ .clkdm_allow_idle = omap4_clkdm_allow_idle,
+ .clkdm_deny_idle = omap4_clkdm_deny_idle,
+ .clkdm_clk_enable = omap4_clkdm_clk_enable,
+ .clkdm_clk_disable = omap4_clkdm_clk_disable,
+};
diff --git a/arch/arm/mach-omap2/cminst44xx.h b/arch/arm/mach-omap2/cminst44xx.h
index d69fdef..bd7bab8 100644
--- a/arch/arm/mach-omap2/cminst44xx.h
+++ b/arch/arm/mach-omap2/cminst44xx.h
@@ -38,4 +38,6 @@
extern u32 omap4_cminst_read_inst_reg_bits(u8 part, u16 inst, s16 idx,
u32 mask);
+extern void omap_cm_base_init(void);
+
#endif
diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c
index 48daac2..d246efd 100644
--- a/arch/arm/mach-omap2/common-board-devices.c
+++ b/arch/arm/mach-omap2/common-board-devices.c
@@ -25,7 +25,6 @@
#include <linux/spi/ads7846.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
-#include <linux/platform_data/mtd-nand-omap2.h>
#include "common.h"
#include "common-board-devices.h"
@@ -64,30 +63,36 @@
struct spi_board_info *spi_bi = &ads7846_spi_board_info;
int err;
- err = gpio_request_one(gpio_pendown, GPIOF_IN, "TSPenDown");
- if (err) {
- pr_err("Couldn't obtain gpio for TSPenDown: %d\n", err);
- return;
- }
+ /*
+ * If a board defines get_pendown_state() function, request the pendown
+ * GPIO and set the GPIO debounce time.
+ * If a board does not define the get_pendown_state() function, then
+ * the ads7846 driver will setup the pendown GPIO itself.
+ */
+ if (board_pdata && board_pdata->get_pendown_state) {
+ err = gpio_request_one(gpio_pendown, GPIOF_IN, "TSPenDown");
+ if (err) {
+ pr_err("Couldn't obtain gpio for TSPenDown: %d\n", err);
+ return;
+ }
- if (gpio_debounce)
- gpio_set_debounce(gpio_pendown, gpio_debounce);
+ if (gpio_debounce)
+ gpio_set_debounce(gpio_pendown, gpio_debounce);
+
+ gpio_export(gpio_pendown, 0);
+ }
spi_bi->bus_num = bus_num;
spi_bi->irq = gpio_to_irq(gpio_pendown);
+ ads7846_config.gpio_pendown = gpio_pendown;
+
if (board_pdata) {
board_pdata->gpio_pendown = gpio_pendown;
+ board_pdata->gpio_pendown_debounce = gpio_debounce;
spi_bi->platform_data = board_pdata;
- if (board_pdata->get_pendown_state)
- gpio_export(gpio_pendown, 0);
- } else {
- ads7846_config.gpio_pendown = gpio_pendown;
}
- if (!board_pdata || (board_pdata && !board_pdata->get_pendown_state))
- gpio_free(gpio_pendown);
-
spi_register_board_info(&ads7846_spi_board_info, 1);
}
#else
@@ -96,48 +101,3 @@
{
}
#endif
-
-#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE)
-static struct omap_nand_platform_data nand_data;
-
-void __init omap_nand_flash_init(int options, struct mtd_partition *parts,
- int nr_parts)
-{
- u8 cs = 0;
- u8 nandcs = GPMC_CS_NUM + 1;
-
- /* find out the chip-select on which NAND exists */
- while (cs < GPMC_CS_NUM) {
- u32 ret = 0;
- ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
-
- if ((ret & 0xC00) == 0x800) {
- printk(KERN_INFO "Found NAND on CS%d\n", cs);
- if (nandcs > GPMC_CS_NUM)
- nandcs = cs;
- }
- cs++;
- }
-
- if (nandcs > GPMC_CS_NUM) {
- pr_info("NAND: Unable to find configuration in GPMC\n");
- return;
- }
-
- if (nandcs < GPMC_CS_NUM) {
- nand_data.cs = nandcs;
- nand_data.parts = parts;
- nand_data.nr_parts = nr_parts;
- nand_data.devsize = options;
-
- printk(KERN_INFO "Registering NAND on CS%d\n", nandcs);
- if (gpmc_nand_init(&nand_data) < 0)
- printk(KERN_ERR "Unable to register NAND device\n");
- }
-}
-#else
-void __init omap_nand_flash_init(int options, struct mtd_partition *parts,
- int nr_parts)
-{
-}
-#endif
diff --git a/arch/arm/mach-omap2/common-board-devices.h b/arch/arm/mach-omap2/common-board-devices.h
index a0b4a428..72bb41b 100644
--- a/arch/arm/mach-omap2/common-board-devices.h
+++ b/arch/arm/mach-omap2/common-board-devices.h
@@ -10,6 +10,5 @@
void omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce,
struct ads7846_platform_data *board_pdata);
-void omap_nand_flash_init(int opts, struct mtd_partition *parts, int n_parts);
#endif /* __OMAP_COMMON_BOARD_DEVICES__ */
diff --git a/arch/arm/mach-omap2/common.c b/arch/arm/mach-omap2/common.c
index 17950c6..5c2fd48 100644
--- a/arch/arm/mach-omap2/common.c
+++ b/arch/arm/mach-omap2/common.c
@@ -14,189 +14,26 @@
*/
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/io.h>
+#include <linux/platform_data/dsp-omap.h>
-#include <plat/clock.h>
+#include <plat/vram.h>
-#include "soc.h"
-#include "iomap.h"
#include "common.h"
-#include "sdrc.h"
-#include "control.h"
-
-/* Global address base setup code */
-
-static void __init __omap2_set_globals(struct omap_globals *omap2_globals)
-{
- omap2_set_globals_tap(omap2_globals);
- omap2_set_globals_sdrc(omap2_globals);
- omap2_set_globals_control(omap2_globals);
- omap2_set_globals_prcm(omap2_globals);
-}
-
-#if defined(CONFIG_SOC_OMAP2420)
-
-static struct omap_globals omap242x_globals = {
- .class = OMAP242X_CLASS,
- .tap = OMAP2_L4_IO_ADDRESS(0x48014000),
- .sdrc = OMAP2_L3_IO_ADDRESS(OMAP2420_SDRC_BASE),
- .sms = OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE),
- .ctrl = OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE),
- .prm = OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE),
- .cm = OMAP2_L4_IO_ADDRESS(OMAP2420_CM_BASE),
-};
-
-void __init omap2_set_globals_242x(void)
-{
- __omap2_set_globals(&omap242x_globals);
-}
-
-void __init omap242x_map_io(void)
-{
- omap242x_map_common_io();
-}
-#endif
-
-#if defined(CONFIG_SOC_OMAP2430)
-
-static struct omap_globals omap243x_globals = {
- .class = OMAP243X_CLASS,
- .tap = OMAP2_L4_IO_ADDRESS(0x4900a000),
- .sdrc = OMAP2_L3_IO_ADDRESS(OMAP243X_SDRC_BASE),
- .sms = OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE),
- .ctrl = OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE),
- .prm = OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE),
- .cm = OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE),
-};
-
-void __init omap2_set_globals_243x(void)
-{
- __omap2_set_globals(&omap243x_globals);
-}
-
-void __init omap243x_map_io(void)
-{
- omap243x_map_common_io();
-}
-#endif
-
-#if defined(CONFIG_ARCH_OMAP3)
-
-static struct omap_globals omap3_globals = {
- .class = OMAP343X_CLASS,
- .tap = OMAP2_L4_IO_ADDRESS(0x4830A000),
- .sdrc = OMAP2_L3_IO_ADDRESS(OMAP343X_SDRC_BASE),
- .sms = OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE),
- .ctrl = OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE),
- .prm = OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE),
- .cm = OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE),
-};
-
-void __init omap2_set_globals_3xxx(void)
-{
- __omap2_set_globals(&omap3_globals);
-}
-
-void __init omap3_map_io(void)
-{
- omap34xx_map_common_io();
-}
+#include "omap-secure.h"
/*
- * Adjust TAP register base such that omap3_check_revision accesses the correct
- * TI81XX register for checking device ID (it adds 0x204 to tap base while
- * TI81XX DEVICE ID register is at offset 0x600 from control base).
+ * Stub function for OMAP2 so that common files
+ * continue to build when custom builds are used
*/
-#define TI81XX_TAP_BASE (TI81XX_CTRL_BASE + \
- TI81XX_CONTROL_DEVICE_ID - 0x204)
-
-static struct omap_globals ti81xx_globals = {
- .class = OMAP343X_CLASS,
- .tap = OMAP2_L4_IO_ADDRESS(TI81XX_TAP_BASE),
- .ctrl = OMAP2_L4_IO_ADDRESS(TI81XX_CTRL_BASE),
- .prm = OMAP2_L4_IO_ADDRESS(TI81XX_PRCM_BASE),
- .cm = OMAP2_L4_IO_ADDRESS(TI81XX_PRCM_BASE),
-};
-
-void __init omap2_set_globals_ti81xx(void)
+int __weak omap_secure_ram_reserve_memblock(void)
{
- __omap2_set_globals(&ti81xx_globals);
+ return 0;
}
-void __init ti81xx_map_io(void)
+void __init omap_reserve(void)
{
- omapti81xx_map_common_io();
+ omap_vram_reserve_sdram_memblock();
+ omap_dsp_reserve_sdram_memblock();
+ omap_secure_ram_reserve_memblock();
+ omap_barrier_reserve_memblock();
}
-#endif
-
-#if defined(CONFIG_SOC_AM33XX)
-#define AM33XX_TAP_BASE (AM33XX_CTRL_BASE + \
- TI81XX_CONTROL_DEVICE_ID - 0x204)
-
-static struct omap_globals am33xx_globals = {
- .class = AM335X_CLASS,
- .tap = AM33XX_L4_WK_IO_ADDRESS(AM33XX_TAP_BASE),
- .ctrl = AM33XX_L4_WK_IO_ADDRESS(AM33XX_CTRL_BASE),
- .prm = AM33XX_L4_WK_IO_ADDRESS(AM33XX_PRCM_BASE),
- .cm = AM33XX_L4_WK_IO_ADDRESS(AM33XX_PRCM_BASE),
-};
-
-void __init omap2_set_globals_am33xx(void)
-{
- __omap2_set_globals(&am33xx_globals);
-}
-
-void __init am33xx_map_io(void)
-{
- omapam33xx_map_common_io();
-}
-#endif
-
-#if defined(CONFIG_ARCH_OMAP4)
-static struct omap_globals omap4_globals = {
- .class = OMAP443X_CLASS,
- .tap = OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE),
- .ctrl = OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE),
- .ctrl_pad = OMAP2_L4_IO_ADDRESS(OMAP443X_CTRL_BASE),
- .prm = OMAP2_L4_IO_ADDRESS(OMAP4430_PRM_BASE),
- .cm = OMAP2_L4_IO_ADDRESS(OMAP4430_CM_BASE),
- .cm2 = OMAP2_L4_IO_ADDRESS(OMAP4430_CM2_BASE),
- .prcm_mpu = OMAP2_L4_IO_ADDRESS(OMAP4430_PRCM_MPU_BASE),
-};
-
-void __init omap2_set_globals_443x(void)
-{
- __omap2_set_globals(&omap4_globals);
-}
-
-void __init omap4_map_io(void)
-{
- omap44xx_map_common_io();
-}
-#endif
-
-#if defined(CONFIG_SOC_OMAP5)
-static struct omap_globals omap5_globals = {
- .class = OMAP54XX_CLASS,
- .tap = OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE),
- .ctrl = OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE),
- .ctrl_pad = OMAP2_L4_IO_ADDRESS(OMAP54XX_CTRL_BASE),
- .prm = OMAP2_L4_IO_ADDRESS(OMAP54XX_PRM_BASE),
- .cm = OMAP2_L4_IO_ADDRESS(OMAP54XX_CM_CORE_AON_BASE),
- .cm2 = OMAP2_L4_IO_ADDRESS(OMAP54XX_CM_CORE_BASE),
- .prcm_mpu = OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE),
-};
-
-void __init omap2_set_globals_5xxx(void)
-{
- omap2_set_globals_tap(&omap5_globals);
- omap2_set_globals_control(&omap5_globals);
- omap2_set_globals_prcm(&omap5_globals);
-}
-
-void __init omap5_map_io(void)
-{
- omap5_map_common_io();
-}
-#endif
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index 7045e4d6..08c5864 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -28,64 +28,19 @@
#include <linux/irq.h>
#include <linux/delay.h>
+#include <linux/i2c.h>
#include <linux/i2c/twl.h>
+#include <linux/i2c-omap.h>
#include <asm/proc-fns.h>
-#include <plat/cpu.h>
-#include <plat/serial.h>
-#include <plat/common.h>
+#include "i2c.h"
+#include "serial.h"
+
+#include "usb.h"
#define OMAP_INTC_START NR_IRQS
-#ifdef CONFIG_SOC_OMAP2420
-extern void omap242x_map_common_io(void);
-#else
-static inline void omap242x_map_common_io(void)
-{
-}
-#endif
-
-#ifdef CONFIG_SOC_OMAP2430
-extern void omap243x_map_common_io(void);
-#else
-static inline void omap243x_map_common_io(void)
-{
-}
-#endif
-
-#ifdef CONFIG_ARCH_OMAP3
-extern void omap34xx_map_common_io(void);
-#else
-static inline void omap34xx_map_common_io(void)
-{
-}
-#endif
-
-#ifdef CONFIG_SOC_TI81XX
-extern void omapti81xx_map_common_io(void);
-#else
-static inline void omapti81xx_map_common_io(void)
-{
-}
-#endif
-
-#ifdef CONFIG_SOC_AM33XX
-extern void omapam33xx_map_common_io(void);
-#else
-static inline void omapam33xx_map_common_io(void)
-{
-}
-#endif
-
-#ifdef CONFIG_ARCH_OMAP4
-extern void omap44xx_map_common_io(void);
-#else
-static inline void omap44xx_map_common_io(void)
-{
-}
-#endif
-
#if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP2)
int omap2_pm_init(void);
#else
@@ -122,14 +77,6 @@
}
#endif
-#ifdef CONFIG_SOC_OMAP5
-extern void omap5_map_common_io(void);
-#else
-static inline void omap5_map_common_io(void)
-{
-}
-#endif
-
extern void omap2_init_common_infrastructure(void);
extern struct sys_timer omap2_timer;
@@ -162,52 +109,43 @@
void ti81xx_init_late(void);
void omap4430_init_late(void);
int omap2_common_pm_late_init(void);
-void omap_prcm_restart(char, const char *);
-/*
- * IO bases for various OMAP processors
- * Except the tap base, rest all the io bases
- * listed are physical addresses.
- */
-struct omap_globals {
- u32 class; /* OMAP class to detect */
- void __iomem *tap; /* Control module ID code */
- void __iomem *sdrc; /* SDRAM Controller */
- void __iomem *sms; /* SDRAM Memory Scheduler */
- void __iomem *ctrl; /* System Control Module */
- void __iomem *ctrl_pad; /* PAD Control Module */
- void __iomem *prm; /* Power and Reset Management */
- void __iomem *cm; /* Clock Management */
- void __iomem *cm2;
- void __iomem *prcm_mpu;
-};
-
-void omap2_set_globals_242x(void);
-void omap2_set_globals_243x(void);
-void omap2_set_globals_3xxx(void);
-void omap2_set_globals_443x(void);
-void omap2_set_globals_5xxx(void);
-void omap2_set_globals_ti81xx(void);
-void omap2_set_globals_am33xx(void);
-
-/* These get called from omap2_set_globals_xxxx(), do not call these */
-void omap2_set_globals_tap(struct omap_globals *);
-#if defined(CONFIG_SOC_HAS_OMAP2_SDRC)
-void omap2_set_globals_sdrc(struct omap_globals *);
+#if defined(CONFIG_SOC_OMAP2420) || defined(CONFIG_SOC_OMAP2430)
+void omap2xxx_restart(char mode, const char *cmd);
#else
-static inline void omap2_set_globals_sdrc(struct omap_globals *omap2_globals)
-{ }
+static inline void omap2xxx_restart(char mode, const char *cmd)
+{
+}
#endif
-void omap2_set_globals_control(struct omap_globals *);
-void omap2_set_globals_prcm(struct omap_globals *);
-void omap242x_map_io(void);
-void omap243x_map_io(void);
-void omap3_map_io(void);
-void am33xx_map_io(void);
-void omap4_map_io(void);
-void omap5_map_io(void);
-void ti81xx_map_io(void);
+#ifdef CONFIG_ARCH_OMAP3
+void omap3xxx_restart(char mode, const char *cmd);
+#else
+static inline void omap3xxx_restart(char mode, const char *cmd)
+{
+}
+#endif
+
+#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
+void omap44xx_restart(char mode, const char *cmd);
+#else
+static inline void omap44xx_restart(char mode, const char *cmd)
+{
+}
+#endif
+
+/* This gets called from mach-omap2/io.c, do not call this */
+void __init omap2_set_globals_tap(u32 class, void __iomem *tap);
+
+void __init omap242x_map_io(void);
+void __init omap243x_map_io(void);
+void __init omap3_map_io(void);
+void __init am33xx_map_io(void);
+void __init omap4_map_io(void);
+void __init omap5_map_io(void);
+void __init ti81xx_map_io(void);
+
+/* omap_barriers_init() is OMAP4 only */
void omap_barriers_init(void);
/**
@@ -338,6 +276,10 @@
struct omap_sdrc_params *sdrc_cs1);
struct omap2_hsmmc_info;
extern int omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers);
+extern void omap_reserve(void);
+
+struct omap_hwmod;
+extern int omap_dss_reset(struct omap_hwmod *);
#endif /* __ASSEMBLER__ */
#endif /* __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H */
diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index d1ff839..2adb268 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -1,7 +1,7 @@
/*
* OMAP2/3 System Control Module register access
*
- * Copyright (C) 2007 Texas Instruments, Inc.
+ * Copyright (C) 2007, 2012 Texas Instruments, Inc.
* Copyright (C) 2007 Nokia Corporation
*
* Written by Paul Walmsley
@@ -15,15 +15,13 @@
#include <linux/kernel.h>
#include <linux/io.h>
-#include <plat/sdrc.h>
-
#include "soc.h"
#include "iomap.h"
#include "common.h"
#include "cm-regbits-34xx.h"
#include "prm-regbits-34xx.h"
-#include "prm2xxx_3xxx.h"
-#include "cm2xxx_3xxx.h"
+#include "prm3xxx.h"
+#include "cm3xxx.h"
#include "sdrc.h"
#include "pm.h"
#include "control.h"
@@ -149,13 +147,11 @@
#define OMAP_CTRL_REGADDR(reg) (omap2_ctrl_base + (reg))
#define OMAP4_CTRL_PAD_REGADDR(reg) (omap4_ctrl_pad_base + (reg))
-void __init omap2_set_globals_control(struct omap_globals *omap2_globals)
+void __init omap2_set_globals_control(void __iomem *ctrl,
+ void __iomem *ctrl_pad)
{
- if (omap2_globals->ctrl)
- omap2_ctrl_base = omap2_globals->ctrl;
-
- if (omap2_globals->ctrl_pad)
- omap4_ctrl_pad_base = omap2_globals->ctrl_pad;
+ omap2_ctrl_base = ctrl;
+ omap4_ctrl_pad_base = ctrl_pad;
}
void __iomem *omap_ctrl_base_get(void)
diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h
index a89e825..4ca8747 100644
--- a/arch/arm/mach-omap2/control.h
+++ b/arch/arm/mach-omap2/control.h
@@ -414,6 +414,8 @@
extern void omap_ctrl_write_dsp_boot_mode(u8 bootmode);
extern void omap3630_ctrl_disable_rta(void);
extern int omap3_ctrl_save_padconf(void);
+extern void omap2_set_globals_control(void __iomem *ctrl,
+ void __iomem *ctrl_pad);
#else
#define omap_ctrl_base_get() 0
#define omap_ctrl_readb(x) 0
diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c
index bc27569..bca7a88 100644
--- a/arch/arm/mach-omap2/cpuidle34xx.c
+++ b/arch/arm/mach-omap2/cpuidle34xx.c
@@ -27,7 +27,6 @@
#include <linux/export.h>
#include <linux/cpu_pm.h>
-#include <plat/prcm.h>
#include "powerdomain.h"
#include "clockdomain.h"
diff --git a/arch/arm/mach-omap2/debug-devices.h b/arch/arm/mach-omap2/debug-devices.h
deleted file mode 100644
index a4edbd2..0000000
--- a/arch/arm/mach-omap2/debug-devices.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef _OMAP_DEBUG_DEVICES_H
-#define _OMAP_DEBUG_DEVICES_H
-
-#include <linux/types.h>
-
-/* for TI reference platforms sharing the same debug card */
-extern int debug_card_init(u32 addr, unsigned gpio);
-
-#endif
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index cba60e05..d2215e9 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -19,14 +19,16 @@
#include <linux/of.h>
#include <linux/pinctrl/machine.h>
#include <linux/platform_data/omap4-keypad.h>
+#include <linux/platform_data/omap_ocp2scp.h>
#include <asm/mach-types.h>
#include <asm/mach/map.h>
+#include <plat-omap/dma-omap.h>
+
#include "iomap.h"
-#include <plat/dma.h>
-#include <plat/omap_hwmod.h>
-#include <plat/omap_device.h>
+#include "omap_hwmod.h"
+#include "omap_device.h"
#include "omap4-keypad.h"
#include "soc.h"
@@ -34,6 +36,7 @@
#include "mux.h"
#include "control.h"
#include "devices.h"
+#include "dma.h"
#define L3_MODULES_MAX_LEN 12
#define L3_MODULES 3
@@ -613,6 +616,83 @@
static inline void omap_init_vout(void) {}
#endif
+#if defined(CONFIG_OMAP_OCP2SCP) || defined(CONFIG_OMAP_OCP2SCP_MODULE)
+static int count_ocp2scp_devices(struct omap_ocp2scp_dev *ocp2scp_dev)
+{
+ int cnt = 0;
+
+ while (ocp2scp_dev->drv_name != NULL) {
+ cnt++;
+ ocp2scp_dev++;
+ }
+
+ return cnt;
+}
+
+static void omap_init_ocp2scp(void)
+{
+ struct omap_hwmod *oh;
+ struct platform_device *pdev;
+ int bus_id = -1, dev_cnt = 0, i;
+ struct omap_ocp2scp_dev *ocp2scp_dev;
+ const char *oh_name, *name;
+ struct omap_ocp2scp_platform_data *pdata;
+
+ if (!cpu_is_omap44xx())
+ return;
+
+ oh_name = "ocp2scp_usb_phy";
+ name = "omap-ocp2scp";
+
+ oh = omap_hwmod_lookup(oh_name);
+ if (!oh) {
+ pr_err("%s: could not find omap_hwmod for %s\n", __func__,
+ oh_name);
+ return;
+ }
+
+ pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
+ if (!pdata) {
+ pr_err("%s: No memory for ocp2scp pdata\n", __func__);
+ return;
+ }
+
+ ocp2scp_dev = oh->dev_attr;
+ dev_cnt = count_ocp2scp_devices(ocp2scp_dev);
+
+ if (!dev_cnt) {
+ pr_err("%s: No devices connected to ocp2scp\n", __func__);
+ kfree(pdata);
+ return;
+ }
+
+ pdata->devices = kzalloc(sizeof(struct omap_ocp2scp_dev *)
+ * dev_cnt, GFP_KERNEL);
+ if (!pdata->devices) {
+ pr_err("%s: No memory for ocp2scp pdata devices\n", __func__);
+ kfree(pdata);
+ return;
+ }
+
+ for (i = 0; i < dev_cnt; i++, ocp2scp_dev++)
+ pdata->devices[i] = ocp2scp_dev;
+
+ pdata->dev_cnt = dev_cnt;
+
+ pdev = omap_device_build(name, bus_id, oh, pdata, sizeof(*pdata), NULL,
+ 0, false);
+ if (IS_ERR(pdev)) {
+ pr_err("Could not build omap_device for %s %s\n",
+ name, oh_name);
+ kfree(pdata->devices);
+ kfree(pdata);
+ return;
+ }
+}
+#else
+static inline void omap_init_ocp2scp(void) { }
+#endif
+
/*-------------------------------------------------------------------------*/
static int __init omap2_init_devices(void)
@@ -640,33 +720,8 @@
omap_init_sham();
omap_init_aes();
omap_init_vout();
+ omap_init_ocp2scp();
return 0;
}
arch_initcall(omap2_init_devices);
-
-#if defined(CONFIG_OMAP_WATCHDOG) || defined(CONFIG_OMAP_WATCHDOG_MODULE)
-static int __init omap_init_wdt(void)
-{
- int id = -1;
- struct platform_device *pdev;
- struct omap_hwmod *oh;
- char *oh_name = "wd_timer2";
- char *dev_name = "omap_wdt";
-
- if (!cpu_class_is_omap2() || of_have_populated_dt())
- return 0;
-
- oh = omap_hwmod_lookup(oh_name);
- if (!oh) {
- pr_err("Could not look up wd_timer%d hwmod\n", id);
- return -EINVAL;
- }
-
- pdev = omap_device_build(dev_name, id, oh, NULL, 0, NULL, 0, 0);
- WARN(IS_ERR(pdev), "Can't build omap_device for %s:%s.\n",
- dev_name, oh->name);
- return 0;
-}
-subsys_initcall(omap_init_wdt);
-#endif
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index 1011995..38ba58c 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -25,15 +25,17 @@
#include <linux/delay.h>
#include <video/omapdss.h>
-#include <plat/omap_hwmod.h>
-#include <plat/omap_device.h>
-#include <plat/omap-pm.h>
+#include "omap_hwmod.h"
+#include "omap_device.h"
+#include "omap-pm.h"
#include "common.h"
+#include "soc.h"
#include "iomap.h"
#include "mux.h"
#include "control.h"
#include "display.h"
+#include "prm.h"
#define DISPC_CONTROL 0x0040
#define DISPC_CONTROL2 0x0238
@@ -284,6 +286,35 @@
return ERR_PTR(r);
}
+static enum omapdss_version __init omap_display_get_version(void)
+{
+ if (cpu_is_omap24xx())
+ return OMAPDSS_VER_OMAP24xx;
+ else if (cpu_is_omap3630())
+ return OMAPDSS_VER_OMAP3630;
+ else if (cpu_is_omap34xx()) {
+ if (soc_is_am35xx()) {
+ return OMAPDSS_VER_AM35xx;
+ } else {
+ if (omap_rev() < OMAP3430_REV_ES3_0)
+ return OMAPDSS_VER_OMAP34xx_ES1;
+ else
+ return OMAPDSS_VER_OMAP34xx_ES3;
+ }
+ } else if (omap_rev() == OMAP4430_REV_ES1_0)
+ return OMAPDSS_VER_OMAP4430_ES1;
+ else if (omap_rev() == OMAP4430_REV_ES2_0 ||
+ omap_rev() == OMAP4430_REV_ES2_1 ||
+ omap_rev() == OMAP4430_REV_ES2_2)
+ return OMAPDSS_VER_OMAP4430_ES2;
+ else if (cpu_is_omap44xx())
+ return OMAPDSS_VER_OMAP4;
+ else if (soc_is_omap54xx())
+ return OMAPDSS_VER_OMAP5;
+ else
+ return OMAPDSS_VER_UNKNOWN;
+}
+
int __init omap_display_init(struct omap_dss_board_info *board_data)
{
int r = 0;
@@ -291,9 +322,18 @@
int i, oh_count;
const struct omap_dss_hwmod_data *curr_dss_hwmod;
struct platform_device *dss_pdev;
+ enum omapdss_version ver;
/* create omapdss device */
+ ver = omap_display_get_version();
+
+ if (ver == OMAPDSS_VER_UNKNOWN) {
+ pr_err("DSS not supported on this SoC\n");
+ return -ENODEV;
+ }
+
+ board_data->version = ver;
board_data->dsi_enable_pads = omap_dsi_enable_pads;
board_data->dsi_disable_pads = omap_dsi_disable_pads;
board_data->get_context_loss_count = omap_pm_get_dev_context_loss_count;
@@ -473,7 +513,6 @@
}
}
-#define MAX_MODULE_SOFTRESET_WAIT 10000
int omap_dss_reset(struct omap_hwmod *oh)
{
struct omap_hwmod_opt_clk *oc;
diff --git a/arch/arm/mach-omap2/dma.c b/arch/arm/mach-omap2/dma.c
index ff75abe..e5aba58 100644
--- a/arch/arm/mach-omap2/dma.c
+++ b/arch/arm/mach-omap2/dma.c
@@ -28,9 +28,11 @@
#include <linux/init.h>
#include <linux/device.h>
-#include <plat/omap_hwmod.h>
-#include <plat/omap_device.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
+
+#include "soc.h"
+#include "omap_hwmod.h"
+#include "omap_device.h"
#define OMAP2_DMA_STRIDE 0x60
@@ -274,6 +276,9 @@
return -ENOMEM;
}
+ if (cpu_is_omap34xx() && (omap_type() != OMAP2_DEVICE_TYPE_GP))
+ d->dev_caps |= HS_CHANNELS_RESERVED;
+
/* Check the capabilities register for descriptor loading feature */
if (dma_read(CAPS_0, 0) & DMA_HAS_DESCRIPTOR_CAPS)
dma_common_ch_end = CCDN;
diff --git a/arch/arm/mach-omap2/dma.h b/arch/arm/mach-omap2/dma.h
new file mode 100644
index 0000000..eba80db
--- /dev/null
+++ b/arch/arm/mach-omap2/dma.h
@@ -0,0 +1,131 @@
+/*
+ * OMAP2PLUS DMA channel definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __OMAP2PLUS_DMA_CHANNEL_H
+#define __OMAP2PLUS_DMA_CHANNEL_H
+
+
+/* DMA channels for 24xx */
+#define OMAP24XX_DMA_NO_DEVICE 0
+#define OMAP24XX_DMA_XTI_DMA 1 /* S_DMA_0 */
+#define OMAP24XX_DMA_EXT_DMAREQ0 2 /* S_DMA_1 */
+#define OMAP24XX_DMA_EXT_DMAREQ1 3 /* S_DMA_2 */
+#define OMAP24XX_DMA_GPMC 4 /* S_DMA_3 */
+#define OMAP24XX_DMA_GFX 5 /* S_DMA_4 */
+#define OMAP24XX_DMA_DSS 6 /* S_DMA_5 */
+#define OMAP242X_DMA_VLYNQ_TX 7 /* S_DMA_6 */
+#define OMAP24XX_DMA_EXT_DMAREQ2 7 /* S_DMA_6 */
+#define OMAP24XX_DMA_CWT 8 /* S_DMA_7 */
+#define OMAP24XX_DMA_AES_TX 9 /* S_DMA_8 */
+#define OMAP24XX_DMA_AES_RX 10 /* S_DMA_9 */
+#define OMAP24XX_DMA_DES_TX 11 /* S_DMA_10 */
+#define OMAP24XX_DMA_DES_RX 12 /* S_DMA_11 */
+#define OMAP24XX_DMA_SHA1MD5_RX 13 /* S_DMA_12 */
+#define OMAP34XX_DMA_SHA2MD5_RX 13 /* S_DMA_12 */
+#define OMAP242X_DMA_EXT_DMAREQ2 14 /* S_DMA_13 */
+#define OMAP242X_DMA_EXT_DMAREQ3 15 /* S_DMA_14 */
+#define OMAP242X_DMA_EXT_DMAREQ4 16 /* S_DMA_15 */
+#define OMAP242X_DMA_EAC_AC_RD 17 /* S_DMA_16 */
+#define OMAP242X_DMA_EAC_AC_WR 18 /* S_DMA_17 */
+#define OMAP242X_DMA_EAC_MD_UL_RD 19 /* S_DMA_18 */
+#define OMAP242X_DMA_EAC_MD_UL_WR 20 /* S_DMA_19 */
+#define OMAP242X_DMA_EAC_MD_DL_RD 21 /* S_DMA_20 */
+#define OMAP242X_DMA_EAC_MD_DL_WR 22 /* S_DMA_21 */
+#define OMAP242X_DMA_EAC_BT_UL_RD 23 /* S_DMA_22 */
+#define OMAP242X_DMA_EAC_BT_UL_WR 24 /* S_DMA_23 */
+#define OMAP242X_DMA_EAC_BT_DL_RD 25 /* S_DMA_24 */
+#define OMAP242X_DMA_EAC_BT_DL_WR 26 /* S_DMA_25 */
+#define OMAP243X_DMA_EXT_DMAREQ3 14 /* S_DMA_13 */
+#define OMAP24XX_DMA_SPI3_TX0 15 /* S_DMA_14 */
+#define OMAP24XX_DMA_SPI3_RX0 16 /* S_DMA_15 */
+#define OMAP24XX_DMA_MCBSP3_TX 17 /* S_DMA_16 */
+#define OMAP24XX_DMA_MCBSP3_RX 18 /* S_DMA_17 */
+#define OMAP24XX_DMA_MCBSP4_TX 19 /* S_DMA_18 */
+#define OMAP24XX_DMA_MCBSP4_RX 20 /* S_DMA_19 */
+#define OMAP24XX_DMA_MCBSP5_TX 21 /* S_DMA_20 */
+#define OMAP24XX_DMA_MCBSP5_RX 22 /* S_DMA_21 */
+#define OMAP24XX_DMA_SPI3_TX1 23 /* S_DMA_22 */
+#define OMAP24XX_DMA_SPI3_RX1 24 /* S_DMA_23 */
+#define OMAP243X_DMA_EXT_DMAREQ4 25 /* S_DMA_24 */
+#define OMAP243X_DMA_EXT_DMAREQ5 26 /* S_DMA_25 */
+#define OMAP34XX_DMA_I2C3_TX 25 /* S_DMA_24 */
+#define OMAP34XX_DMA_I2C3_RX 26 /* S_DMA_25 */
+#define OMAP24XX_DMA_I2C1_TX 27 /* S_DMA_26 */
+#define OMAP24XX_DMA_I2C1_RX 28 /* S_DMA_27 */
+#define OMAP24XX_DMA_I2C2_TX 29 /* S_DMA_28 */
+#define OMAP24XX_DMA_I2C2_RX 30 /* S_DMA_29 */
+#define OMAP24XX_DMA_MCBSP1_TX 31 /* S_DMA_30 */
+#define OMAP24XX_DMA_MCBSP1_RX 32 /* S_DMA_31 */
+#define OMAP24XX_DMA_MCBSP2_TX 33 /* S_DMA_32 */
+#define OMAP24XX_DMA_MCBSP2_RX 34 /* S_DMA_33 */
+#define OMAP24XX_DMA_SPI1_TX0 35 /* S_DMA_34 */
+#define OMAP24XX_DMA_SPI1_RX0 36 /* S_DMA_35 */
+#define OMAP24XX_DMA_SPI1_TX1 37 /* S_DMA_36 */
+#define OMAP24XX_DMA_SPI1_RX1 38 /* S_DMA_37 */
+#define OMAP24XX_DMA_SPI1_TX2 39 /* S_DMA_38 */
+#define OMAP24XX_DMA_SPI1_RX2 40 /* S_DMA_39 */
+#define OMAP24XX_DMA_SPI1_TX3 41 /* S_DMA_40 */
+#define OMAP24XX_DMA_SPI1_RX3 42 /* S_DMA_41 */
+#define OMAP24XX_DMA_SPI2_TX0 43 /* S_DMA_42 */
+#define OMAP24XX_DMA_SPI2_RX0 44 /* S_DMA_43 */
+#define OMAP24XX_DMA_SPI2_TX1 45 /* S_DMA_44 */
+#define OMAP24XX_DMA_SPI2_RX1 46 /* S_DMA_45 */
+#define OMAP24XX_DMA_MMC2_TX 47 /* S_DMA_46 */
+#define OMAP24XX_DMA_MMC2_RX 48 /* S_DMA_47 */
+#define OMAP24XX_DMA_UART1_TX 49 /* S_DMA_48 */
+#define OMAP24XX_DMA_UART1_RX 50 /* S_DMA_49 */
+#define OMAP24XX_DMA_UART2_TX 51 /* S_DMA_50 */
+#define OMAP24XX_DMA_UART2_RX 52 /* S_DMA_51 */
+#define OMAP24XX_DMA_UART3_TX 53 /* S_DMA_52 */
+#define OMAP24XX_DMA_UART3_RX 54 /* S_DMA_53 */
+#define OMAP24XX_DMA_USB_W2FC_TX0 55 /* S_DMA_54 */
+#define OMAP24XX_DMA_USB_W2FC_RX0 56 /* S_DMA_55 */
+#define OMAP24XX_DMA_USB_W2FC_TX1 57 /* S_DMA_56 */
+#define OMAP24XX_DMA_USB_W2FC_RX1 58 /* S_DMA_57 */
+#define OMAP24XX_DMA_USB_W2FC_TX2 59 /* S_DMA_58 */
+#define OMAP24XX_DMA_USB_W2FC_RX2 60 /* S_DMA_59 */
+#define OMAP24XX_DMA_MMC1_TX 61 /* S_DMA_60 */
+#define OMAP24XX_DMA_MMC1_RX 62 /* S_DMA_61 */
+#define OMAP24XX_DMA_MS 63 /* S_DMA_62 */
+#define OMAP242X_DMA_EXT_DMAREQ5 64 /* S_DMA_63 */
+#define OMAP243X_DMA_EXT_DMAREQ6 64 /* S_DMA_63 */
+#define OMAP34XX_DMA_EXT_DMAREQ3 64 /* S_DMA_63 */
+#define OMAP34XX_DMA_AES2_TX 65 /* S_DMA_64 */
+#define OMAP34XX_DMA_AES2_RX 66 /* S_DMA_65 */
+#define OMAP34XX_DMA_DES2_TX 67 /* S_DMA_66 */
+#define OMAP34XX_DMA_DES2_RX 68 /* S_DMA_67 */
+#define OMAP34XX_DMA_SHA1MD5_RX 69 /* S_DMA_68 */
+#define OMAP34XX_DMA_SPI4_TX0 70 /* S_DMA_69 */
+#define OMAP34XX_DMA_SPI4_RX0 71 /* S_DMA_70 */
+#define OMAP34XX_DSS_DMA0 72 /* S_DMA_71 */
+#define OMAP34XX_DSS_DMA1 73 /* S_DMA_72 */
+#define OMAP34XX_DSS_DMA2 74 /* S_DMA_73 */
+#define OMAP34XX_DSS_DMA3 75 /* S_DMA_74 */
+#define OMAP34XX_DMA_MMC3_TX 77 /* S_DMA_76 */
+#define OMAP34XX_DMA_MMC3_RX 78 /* S_DMA_77 */
+#define OMAP34XX_DMA_USIM_TX 79 /* S_DMA_78 */
+#define OMAP34XX_DMA_USIM_RX 80 /* S_DMA_79 */
+
+#define OMAP36XX_DMA_UART4_TX 81 /* S_DMA_80 */
+#define OMAP36XX_DMA_UART4_RX 82 /* S_DMA_81 */
+
+/* Only for AM35xx */
+#define AM35XX_DMA_UART4_TX 54
+#define AM35XX_DMA_UART4_RX 55
+
+#endif /* __OMAP2PLUS_DMA_CHANNEL_H */
diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c
index 814e180..eacf51f 100644
--- a/arch/arm/mach-omap2/dpll3xxx.c
+++ b/arch/arm/mach-omap2/dpll3xxx.c
@@ -28,8 +28,6 @@
#include <linux/bitops.h>
#include <linux/clkdev.h>
-#include <plat/clock.h>
-
#include "soc.h"
#include "clock.h"
#include "cm2xxx_3xxx.h"
diff --git a/arch/arm/mach-omap2/dpll44xx.c b/arch/arm/mach-omap2/dpll44xx.c
index 09d0ccc..5854da1 100644
--- a/arch/arm/mach-omap2/dpll44xx.c
+++ b/arch/arm/mach-omap2/dpll44xx.c
@@ -15,8 +15,6 @@
#include <linux/io.h>
#include <linux/bitops.h>
-#include <plat/clock.h>
-
#include "soc.h"
#include "clock.h"
#include "clock44xx.h"
diff --git a/arch/arm/mach-omap2/drm.c b/arch/arm/mach-omap2/drm.c
index 72e0f01b..6282cc8 100644
--- a/arch/arm/mach-omap2/drm.c
+++ b/arch/arm/mach-omap2/drm.c
@@ -24,8 +24,8 @@
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
-#include <plat/omap_device.h>
-#include <plat/omap_hwmod.h>
+#include "omap_device.h"
+#include "omap_hwmod.h"
#if defined(CONFIG_DRM_OMAP) || (CONFIG_DRM_OMAP_MODULE)
diff --git a/arch/arm/mach-omap2/dsp.c b/arch/arm/mach-omap2/dsp.c
index 9838810..b155500 100644
--- a/arch/arm/mach-omap2/dsp.c
+++ b/arch/arm/mach-omap2/dsp.c
@@ -27,7 +27,7 @@
#include "cm2xxx_3xxx.h"
#include "prm2xxx_3xxx.h"
#ifdef CONFIG_BRIDGE_DVFS
-#include <plat/omap-pm.h>
+#include "omap-pm.h"
#endif
#include <linux/platform_data/dsp-omap.h>
diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c
index d1058f1..399acab 100644
--- a/arch/arm/mach-omap2/gpio.c
+++ b/arch/arm/mach-omap2/gpio.c
@@ -23,9 +23,9 @@
#include <linux/of.h>
#include <linux/platform_data/gpio-omap.h>
-#include <plat/omap_hwmod.h>
-#include <plat/omap_device.h>
-#include <plat/omap-pm.h>
+#include "omap_hwmod.h"
+#include "omap_device.h"
+#include "omap-pm.h"
#include "powerdomain.h"
diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c
index 4acf497..8607735 100644
--- a/arch/arm/mach-omap2/gpmc-nand.c
+++ b/arch/arm/mach-omap2/gpmc-nand.c
@@ -17,9 +17,12 @@
#include <asm/mach/flash.h>
-#include <plat/gpmc.h>
-
+#include "gpmc.h"
#include "soc.h"
+#include "gpmc-nand.h"
+
+/* minimum size for IO mapping */
+#define NAND_IO_SIZE 4
static struct resource gpmc_nand_resource[] = {
{
@@ -40,41 +43,36 @@
.resource = gpmc_nand_resource,
};
-static int omap2_nand_gpmc_retime(struct omap_nand_platform_data *gpmc_nand_data)
+static int omap2_nand_gpmc_retime(
+ struct omap_nand_platform_data *gpmc_nand_data,
+ struct gpmc_timings *gpmc_t)
{
struct gpmc_timings t;
int err;
- if (!gpmc_nand_data->gpmc_t)
- return 0;
-
memset(&t, 0, sizeof(t));
- t.sync_clk = gpmc_nand_data->gpmc_t->sync_clk;
- t.cs_on = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->cs_on);
- t.adv_on = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->adv_on);
+ t.sync_clk = gpmc_t->sync_clk;
+ t.cs_on = gpmc_round_ns_to_ticks(gpmc_t->cs_on);
+ t.adv_on = gpmc_round_ns_to_ticks(gpmc_t->adv_on);
/* Read */
- t.adv_rd_off = gpmc_round_ns_to_ticks(
- gpmc_nand_data->gpmc_t->adv_rd_off);
+ t.adv_rd_off = gpmc_round_ns_to_ticks(gpmc_t->adv_rd_off);
t.oe_on = t.adv_on;
- t.access = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->access);
- t.oe_off = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->oe_off);
- t.cs_rd_off = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->cs_rd_off);
- t.rd_cycle = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->rd_cycle);
+ t.access = gpmc_round_ns_to_ticks(gpmc_t->access);
+ t.oe_off = gpmc_round_ns_to_ticks(gpmc_t->oe_off);
+ t.cs_rd_off = gpmc_round_ns_to_ticks(gpmc_t->cs_rd_off);
+ t.rd_cycle = gpmc_round_ns_to_ticks(gpmc_t->rd_cycle);
/* Write */
- t.adv_wr_off = gpmc_round_ns_to_ticks(
- gpmc_nand_data->gpmc_t->adv_wr_off);
+ t.adv_wr_off = gpmc_round_ns_to_ticks(gpmc_t->adv_wr_off);
t.we_on = t.oe_on;
if (cpu_is_omap34xx()) {
- t.wr_data_mux_bus = gpmc_round_ns_to_ticks(
- gpmc_nand_data->gpmc_t->wr_data_mux_bus);
- t.wr_access = gpmc_round_ns_to_ticks(
- gpmc_nand_data->gpmc_t->wr_access);
+ t.wr_data_mux_bus = gpmc_round_ns_to_ticks(gpmc_t->wr_data_mux_bus);
+ t.wr_access = gpmc_round_ns_to_ticks(gpmc_t->wr_access);
}
- t.we_off = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->we_off);
- t.cs_wr_off = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->cs_wr_off);
- t.wr_cycle = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->wr_cycle);
+ t.we_off = gpmc_round_ns_to_ticks(gpmc_t->we_off);
+ t.cs_wr_off = gpmc_round_ns_to_ticks(gpmc_t->cs_wr_off);
+ t.wr_cycle = gpmc_round_ns_to_ticks(gpmc_t->wr_cycle);
/* Configure GPMC */
if (gpmc_nand_data->devsize == NAND_BUSWIDTH_16)
@@ -91,7 +89,29 @@
return 0;
}
-int __init gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data)
+static bool __init gpmc_hwecc_bch_capable(enum omap_ecc ecc_opt)
+{
+ /* support only OMAP3 class */
+ if (!cpu_is_omap34xx()) {
+ pr_err("BCH ecc is not supported on this CPU\n");
+ return 0;
+ }
+
+ /*
+ * For now, assume 4-bit mode is only supported on OMAP3630 ES1.x, x>=1.
+ * Other chips may be added if confirmed to work.
+ */
+ if ((ecc_opt == OMAP_ECC_BCH4_CODE_HW) &&
+ (!cpu_is_omap3630() || (GET_OMAP_REVISION() == 0))) {
+ pr_err("BCH 4-bit mode is not supported on this CPU\n");
+ return 0;
+ }
+
+ return 1;
+}
+
+int __init gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data,
+ struct gpmc_timings *gpmc_t)
{
int err = 0;
struct device *dev = &gpmc_nand_device.dev;
@@ -112,11 +132,13 @@
gpmc_get_client_irq(GPMC_IRQ_FIFOEVENTENABLE);
gpmc_nand_resource[2].start =
gpmc_get_client_irq(GPMC_IRQ_COUNT_EVENT);
- /* Set timings in GPMC */
- err = omap2_nand_gpmc_retime(gpmc_nand_data);
- if (err < 0) {
- dev_err(dev, "Unable to set gpmc timings: %d\n", err);
- return err;
+
+ if (gpmc_t) {
+ err = omap2_nand_gpmc_retime(gpmc_nand_data, gpmc_t);
+ if (err < 0) {
+ dev_err(dev, "Unable to set gpmc timings: %d\n", err);
+ return err;
+ }
}
/* Enable RD PIN Monitoring Reg */
@@ -126,6 +148,9 @@
gpmc_update_nand_reg(&gpmc_nand_data->reg, gpmc_nand_data->cs);
+ if (!gpmc_hwecc_bch_capable(gpmc_nand_data->ecc_opt))
+ return -EINVAL;
+
err = platform_device_register(&gpmc_nand_device);
if (err < 0) {
dev_err(dev, "Unable to register NAND device\n");
diff --git a/arch/arm/mach-omap2/gpmc-nand.h b/arch/arm/mach-omap2/gpmc-nand.h
new file mode 100644
index 0000000..d59e128
--- /dev/null
+++ b/arch/arm/mach-omap2/gpmc-nand.h
@@ -0,0 +1,27 @@
+/*
+ * arch/arm/mach-omap2/gpmc-nand.h
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __OMAP2_GPMC_NAND_H
+#define __OMAP2_GPMC_NAND_H
+
+#include "gpmc.h"
+#include <linux/platform_data/mtd-nand-omap2.h>
+
+#if IS_ENABLED(CONFIG_MTD_NAND_OMAP2)
+extern int gpmc_nand_init(struct omap_nand_platform_data *d,
+ struct gpmc_timings *gpmc_t);
+#else
+static inline int gpmc_nand_init(struct omap_nand_platform_data *d,
+ struct gpmc_timings *gpmc_t)
+{
+ return 0;
+}
+#endif
+
+#endif
diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c
index 916716e..d102183 100644
--- a/arch/arm/mach-omap2/gpmc-onenand.c
+++ b/arch/arm/mach-omap2/gpmc-onenand.c
@@ -16,15 +16,25 @@
#include <linux/mtd/onenand_regs.h>
#include <linux/io.h>
#include <linux/platform_data/mtd-onenand-omap2.h>
+#include <linux/err.h>
#include <asm/mach/flash.h>
-#include <plat/gpmc.h>
-
+#include "gpmc.h"
#include "soc.h"
+#include "gpmc-onenand.h"
#define ONENAND_IO_SIZE SZ_128K
+#define ONENAND_FLAG_SYNCREAD (1 << 0)
+#define ONENAND_FLAG_SYNCWRITE (1 << 1)
+#define ONENAND_FLAG_HF (1 << 2)
+#define ONENAND_FLAG_VHF (1 << 3)
+
+static unsigned onenand_flags;
+static unsigned latency;
+static int fclk_offset;
+
static struct omap_onenand_platform_data *gpmc_onenand_data;
static struct resource gpmc_onenand_resource = {
@@ -38,11 +48,9 @@
.resource = &gpmc_onenand_resource,
};
-static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base)
+static struct gpmc_timings omap2_onenand_calc_async_timings(void)
{
struct gpmc_timings t;
- u32 reg;
- int err;
const int t_cer = 15;
const int t_avdp = 12;
@@ -55,11 +63,6 @@
const int t_wpl = 40;
const int t_wph = 30;
- /* Ensure sync read and sync write are disabled */
- reg = readw(onenand_base + ONENAND_REG_SYS_CFG1);
- reg &= ~ONENAND_SYS_CFG1_SYNC_READ & ~ONENAND_SYS_CFG1_SYNC_WRITE;
- writew(reg, onenand_base + ONENAND_REG_SYS_CFG1);
-
memset(&t, 0, sizeof(t));
t.sync_clk = 0;
t.cs_on = 0;
@@ -86,25 +89,30 @@
t.cs_wr_off = t.we_off + gpmc_round_ns_to_ticks(t_wph);
t.wr_cycle = t.cs_wr_off + gpmc_round_ns_to_ticks(t_cez);
+ return t;
+}
+
+static int gpmc_set_async_mode(int cs, struct gpmc_timings *t)
+{
/* Configure GPMC for asynchronous read */
gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1,
GPMC_CONFIG1_DEVICESIZE_16 |
GPMC_CONFIG1_MUXADDDATA);
- err = gpmc_cs_set_timings(cs, &t);
- if (err)
- return err;
+ return gpmc_cs_set_timings(cs, t);
+}
+
+static void omap2_onenand_set_async_mode(void __iomem *onenand_base)
+{
+ u32 reg;
/* Ensure sync read and sync write are disabled */
reg = readw(onenand_base + ONENAND_REG_SYS_CFG1);
reg &= ~ONENAND_SYS_CFG1_SYNC_READ & ~ONENAND_SYS_CFG1_SYNC_WRITE;
writew(reg, onenand_base + ONENAND_REG_SYS_CFG1);
-
- return 0;
}
-static void set_onenand_cfg(void __iomem *onenand_base, int latency,
- int sync_read, int sync_write, int hf, int vhf)
+static void set_onenand_cfg(void __iomem *onenand_base)
{
u32 reg;
@@ -112,19 +120,19 @@
reg &= ~((0x7 << ONENAND_SYS_CFG1_BRL_SHIFT) | (0x7 << 9));
reg |= (latency << ONENAND_SYS_CFG1_BRL_SHIFT) |
ONENAND_SYS_CFG1_BL_16;
- if (sync_read)
+ if (onenand_flags & ONENAND_FLAG_SYNCREAD)
reg |= ONENAND_SYS_CFG1_SYNC_READ;
else
reg &= ~ONENAND_SYS_CFG1_SYNC_READ;
- if (sync_write)
+ if (onenand_flags & ONENAND_FLAG_SYNCWRITE)
reg |= ONENAND_SYS_CFG1_SYNC_WRITE;
else
reg &= ~ONENAND_SYS_CFG1_SYNC_WRITE;
- if (hf)
+ if (onenand_flags & ONENAND_FLAG_HF)
reg |= ONENAND_SYS_CFG1_HF;
else
reg &= ~ONENAND_SYS_CFG1_HF;
- if (vhf)
+ if (onenand_flags & ONENAND_FLAG_VHF)
reg |= ONENAND_SYS_CFG1_VHF;
else
reg &= ~ONENAND_SYS_CFG1_VHF;
@@ -132,21 +140,10 @@
}
static int omap2_onenand_get_freq(struct omap_onenand_platform_data *cfg,
- void __iomem *onenand_base, bool *clk_dep)
+ void __iomem *onenand_base)
{
u16 ver = readw(onenand_base + ONENAND_REG_VERSION_ID);
- int freq = 0;
-
- if (cfg->get_freq) {
- struct onenand_freq_info fi;
-
- fi.maf_id = readw(onenand_base + ONENAND_REG_MANUFACTURER_ID);
- fi.dev_id = readw(onenand_base + ONENAND_REG_DEVICE_ID);
- fi.ver_id = ver;
- freq = cfg->get_freq(&fi, clk_dep);
- if (freq)
- return freq;
- }
+ int freq;
switch ((ver >> 4) & 0xf) {
case 0:
@@ -172,9 +169,9 @@
return freq;
}
-static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg,
- void __iomem *onenand_base,
- int *freq_ptr)
+static struct gpmc_timings
+omap2_onenand_calc_sync_timings(struct omap_onenand_platform_data *cfg,
+ int freq)
{
struct gpmc_timings t;
const int t_cer = 15;
@@ -184,29 +181,15 @@
const int t_wpl = 40;
const int t_wph = 30;
int min_gpmc_clk_period, t_ces, t_avds, t_avdh, t_ach, t_aavdh, t_rdyo;
- int div, fclk_offset_ns, fclk_offset, gpmc_clk_ns, latency;
- int first_time = 0, hf = 0, vhf = 0, sync_read = 0, sync_write = 0;
- int err, ticks_cez;
- int cs = cfg->cs, freq = *freq_ptr;
u32 reg;
- bool clk_dep = false;
+ int div, fclk_offset_ns, gpmc_clk_ns;
+ int ticks_cez;
+ int cs = cfg->cs;
- if (cfg->flags & ONENAND_SYNC_READ) {
- sync_read = 1;
- } else if (cfg->flags & ONENAND_SYNC_READWRITE) {
- sync_read = 1;
- sync_write = 1;
- } else
- return omap2_onenand_set_async_mode(cs, onenand_base);
-
- if (!freq) {
- /* Very first call freq is not known */
- err = omap2_onenand_set_async_mode(cs, onenand_base);
- if (err)
- return err;
- freq = omap2_onenand_get_freq(cfg, onenand_base, &clk_dep);
- first_time = 1;
- }
+ if (cfg->flags & ONENAND_SYNC_READ)
+ onenand_flags = ONENAND_FLAG_SYNCREAD;
+ else if (cfg->flags & ONENAND_SYNC_READWRITE)
+ onenand_flags = ONENAND_FLAG_SYNCREAD | ONENAND_FLAG_SYNCWRITE;
switch (freq) {
case 104:
@@ -244,44 +227,31 @@
t_ach = 9;
t_aavdh = 7;
t_rdyo = 15;
- sync_write = 0;
+ onenand_flags &= ~ONENAND_FLAG_SYNCWRITE;
break;
}
- div = gpmc_cs_calc_divider(cs, min_gpmc_clk_period);
+ div = gpmc_calc_divider(min_gpmc_clk_period);
gpmc_clk_ns = gpmc_ticks_to_ns(div);
if (gpmc_clk_ns < 15) /* >66Mhz */
- hf = 1;
+ onenand_flags |= ONENAND_FLAG_HF;
+ else
+ onenand_flags &= ~ONENAND_FLAG_HF;
if (gpmc_clk_ns < 12) /* >83Mhz */
- vhf = 1;
- if (vhf)
+ onenand_flags |= ONENAND_FLAG_VHF;
+ else
+ onenand_flags &= ~ONENAND_FLAG_VHF;
+ if (onenand_flags & ONENAND_FLAG_VHF)
latency = 8;
- else if (hf)
+ else if (onenand_flags & ONENAND_FLAG_HF)
latency = 6;
else if (gpmc_clk_ns >= 25) /* 40 MHz*/
latency = 3;
else
latency = 4;
- if (clk_dep) {
- if (gpmc_clk_ns < 12) { /* >83Mhz */
- t_ces = 3;
- t_avds = 4;
- } else if (gpmc_clk_ns < 15) { /* >66Mhz */
- t_ces = 5;
- t_avds = 4;
- } else if (gpmc_clk_ns < 25) { /* >40Mhz */
- t_ces = 6;
- t_avds = 5;
- } else {
- t_ces = 7;
- t_avds = 7;
- }
- }
-
- if (first_time)
- set_onenand_cfg(onenand_base, latency,
- sync_read, sync_write, hf, vhf);
+ /* Set synchronous read timings */
+ memset(&t, 0, sizeof(t));
if (div == 1) {
reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG2);
@@ -307,8 +277,6 @@
gpmc_cs_write_reg(cs, GPMC_CS_CONFIG4, reg);
}
- /* Set synchronous read timings */
- memset(&t, 0, sizeof(t));
t.sync_clk = min_gpmc_clk_period;
t.cs_on = 0;
t.adv_on = 0;
@@ -330,7 +298,7 @@
ticks_cez);
/* Write */
- if (sync_write) {
+ if (onenand_flags & ONENAND_FLAG_SYNCWRITE) {
t.adv_wr_off = t.adv_rd_off;
t.we_on = 0;
t.we_off = t.cs_rd_off;
@@ -355,6 +323,14 @@
}
}
+ return t;
+}
+
+static int gpmc_set_sync_mode(int cs, struct gpmc_timings *t)
+{
+ unsigned sync_read = onenand_flags & ONENAND_FLAG_SYNCREAD;
+ unsigned sync_write = onenand_flags & ONENAND_FLAG_SYNCWRITE;
+
/* Configure GPMC for synchronous read */
gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1,
GPMC_CONFIG1_WRAPBURST_SUPP |
@@ -371,11 +347,45 @@
GPMC_CONFIG1_DEVICETYPE_NOR |
GPMC_CONFIG1_MUXADDDATA);
- err = gpmc_cs_set_timings(cs, &t);
- if (err)
- return err;
+ return gpmc_cs_set_timings(cs, t);
+}
- set_onenand_cfg(onenand_base, latency, sync_read, sync_write, hf, vhf);
+static int omap2_onenand_setup_async(void __iomem *onenand_base)
+{
+ struct gpmc_timings t;
+ int ret;
+
+ omap2_onenand_set_async_mode(onenand_base);
+
+ t = omap2_onenand_calc_async_timings();
+
+ ret = gpmc_set_async_mode(gpmc_onenand_data->cs, &t);
+ if (IS_ERR_VALUE(ret))
+ return ret;
+
+ omap2_onenand_set_async_mode(onenand_base);
+
+ return 0;
+}
+
+static int omap2_onenand_setup_sync(void __iomem *onenand_base, int *freq_ptr)
+{
+ int ret, freq = *freq_ptr;
+ struct gpmc_timings t;
+
+ if (!freq) {
+ /* Very first call freq is not known */
+ freq = omap2_onenand_get_freq(gpmc_onenand_data, onenand_base);
+ set_onenand_cfg(onenand_base);
+ }
+
+ t = omap2_onenand_calc_sync_timings(gpmc_onenand_data, freq);
+
+ ret = gpmc_set_sync_mode(gpmc_onenand_data->cs, &t);
+ if (IS_ERR_VALUE(ret))
+ return ret;
+
+ set_onenand_cfg(onenand_base);
*freq_ptr = freq;
@@ -385,15 +395,22 @@
static int gpmc_onenand_setup(void __iomem *onenand_base, int *freq_ptr)
{
struct device *dev = &gpmc_onenand_device.dev;
+ unsigned l = ONENAND_SYNC_READ | ONENAND_SYNC_READWRITE;
+ int ret;
- /* Set sync timings in GPMC */
- if (omap2_onenand_set_sync_mode(gpmc_onenand_data, onenand_base,
- freq_ptr) < 0) {
- dev_err(dev, "Unable to set synchronous mode\n");
- return -EINVAL;
+ ret = omap2_onenand_setup_async(onenand_base);
+ if (ret) {
+ dev_err(dev, "unable to set to async mode\n");
+ return ret;
}
- return 0;
+ if (!(gpmc_onenand_data->flags & l))
+ return 0;
+
+ ret = omap2_onenand_setup_sync(onenand_base, freq_ptr);
+ if (ret)
+ dev_err(dev, "unable to set to sync mode\n");
+ return ret;
}
void __init gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data)
@@ -411,6 +428,11 @@
gpmc_onenand_data->flags |= ONENAND_SYNC_READ;
}
+ if (cpu_is_omap34xx())
+ gpmc_onenand_data->flags |= ONENAND_IN_OMAP34XX;
+ else
+ gpmc_onenand_data->flags &= ~ONENAND_IN_OMAP34XX;
+
err = gpmc_cs_request(gpmc_onenand_data->cs, ONENAND_IO_SIZE,
(unsigned long *)&gpmc_onenand_resource.start);
if (err < 0) {
diff --git a/arch/arm/mach-omap2/gpmc-onenand.h b/arch/arm/mach-omap2/gpmc-onenand.h
new file mode 100644
index 0000000..216f23a
--- /dev/null
+++ b/arch/arm/mach-omap2/gpmc-onenand.h
@@ -0,0 +1,24 @@
+/*
+ * arch/arm/mach-omap2/gpmc-onenand.h
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __OMAP2_GPMC_ONENAND_H
+#define __OMAP2_GPMC_ONENAND_H
+
+#include <linux/platform_data/mtd-onenand-omap2.h>
+
+#if IS_ENABLED(CONFIG_MTD_ONENAND_OMAP2)
+extern void gpmc_onenand_init(struct omap_onenand_platform_data *d);
+#else
+#define board_onenand_data NULL
+static inline void gpmc_onenand_init(struct omap_onenand_platform_data *d)
+{
+}
+#endif
+
+#endif
diff --git a/arch/arm/mach-omap2/gpmc-smc91x.c b/arch/arm/mach-omap2/gpmc-smc91x.c
index 5654753..6eed907 100644
--- a/arch/arm/mach-omap2/gpmc-smc91x.c
+++ b/arch/arm/mach-omap2/gpmc-smc91x.c
@@ -17,7 +17,7 @@
#include <linux/io.h>
#include <linux/smc91x.h>
-#include <plat/gpmc.h>
+#include "gpmc.h"
#include "gpmc-smc91x.h"
#include "soc.h"
diff --git a/arch/arm/mach-omap2/gpmc-smsc911x.c b/arch/arm/mach-omap2/gpmc-smsc911x.c
index 249a0b4..ef99011 100644
--- a/arch/arm/mach-omap2/gpmc-smsc911x.c
+++ b/arch/arm/mach-omap2/gpmc-smsc911x.c
@@ -20,7 +20,7 @@
#include <linux/io.h>
#include <linux/smsc911x.h>
-#include <plat/gpmc.h>
+#include "gpmc.h"
#include "gpmc-smsc911x.h"
static struct resource gpmc_smsc911x_resources[] = {
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 92b5718..bf6117c 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -26,16 +26,14 @@
#include <linux/interrupt.h>
#include <linux/platform_device.h>
-#include <asm/mach-types.h>
-#include <plat/gpmc.h>
+#include <linux/platform_data/mtd-nand-omap2.h>
-#include <plat/cpu.h>
-#include <plat/gpmc.h>
-#include <plat/sdrc.h>
-#include <plat/omap_device.h>
+#include <asm/mach-types.h>
#include "soc.h"
#include "common.h"
+#include "omap_device.h"
+#include "gpmc.h"
#define DEVICE_NAME "omap-gpmc"
@@ -59,6 +57,9 @@
#define GPMC_ECC_SIZE_CONFIG 0x1fc
#define GPMC_ECC1_RESULT 0x200
#define GPMC_ECC_BCH_RESULT_0 0x240 /* not available on OMAP2 */
+#define GPMC_ECC_BCH_RESULT_1 0x244 /* not available on OMAP2 */
+#define GPMC_ECC_BCH_RESULT_2 0x248 /* not available on OMAP2 */
+#define GPMC_ECC_BCH_RESULT_3 0x24c /* not available on OMAP2 */
/* GPMC ECC control settings */
#define GPMC_ECC_CTRL_ECCCLEAR 0x100
@@ -75,6 +76,7 @@
#define GPMC_CS0_OFFSET 0x60
#define GPMC_CS_SIZE 0x30
+#define GPMC_BCH_SIZE 0x10
#define GPMC_MEM_START 0x00000000
#define GPMC_MEM_END 0x3FFFFFFF
@@ -137,7 +139,6 @@
static struct resource gpmc_cs_mem[GPMC_CS_NUM];
static DEFINE_SPINLOCK(gpmc_mem_lock);
static unsigned int gpmc_cs_map; /* flag for cs which are initialized */
-static int gpmc_ecc_used = -EINVAL; /* cs using ecc engine */
static struct device *gpmc_dev;
static int gpmc_irq;
static resource_size_t phys_base, mem_size;
@@ -158,22 +159,6 @@
return __raw_readl(gpmc_base + idx);
}
-static void gpmc_cs_write_byte(int cs, int idx, u8 val)
-{
- void __iomem *reg_addr;
-
- reg_addr = gpmc_base + GPMC_CS0_OFFSET + (cs * GPMC_CS_SIZE) + idx;
- __raw_writeb(val, reg_addr);
-}
-
-static u8 gpmc_cs_read_byte(int cs, int idx)
-{
- void __iomem *reg_addr;
-
- reg_addr = gpmc_base + GPMC_CS0_OFFSET + (cs * GPMC_CS_SIZE) + idx;
- return __raw_readb(reg_addr);
-}
-
void gpmc_cs_write_reg(int cs, int idx, u32 val)
{
void __iomem *reg_addr;
@@ -288,7 +273,7 @@
return -1
#endif
-int gpmc_cs_calc_divider(int cs, unsigned int sync_clk)
+int gpmc_calc_divider(unsigned int sync_clk)
{
int div;
u32 l;
@@ -308,7 +293,7 @@
int div;
u32 l;
- div = gpmc_cs_calc_divider(cs, t->sync_clk);
+ div = gpmc_calc_divider(t->sync_clk);
if (div < 0)
return div;
@@ -509,44 +494,6 @@
EXPORT_SYMBOL(gpmc_cs_free);
/**
- * gpmc_read_status - read access request to get the different gpmc status
- * @cmd: command type
- * @return status
- */
-int gpmc_read_status(int cmd)
-{
- int status = -EINVAL;
- u32 regval = 0;
-
- switch (cmd) {
- case GPMC_GET_IRQ_STATUS:
- status = gpmc_read_reg(GPMC_IRQSTATUS);
- break;
-
- case GPMC_PREFETCH_FIFO_CNT:
- regval = gpmc_read_reg(GPMC_PREFETCH_STATUS);
- status = GPMC_PREFETCH_STATUS_FIFO_CNT(regval);
- break;
-
- case GPMC_PREFETCH_COUNT:
- regval = gpmc_read_reg(GPMC_PREFETCH_STATUS);
- status = GPMC_PREFETCH_STATUS_COUNT(regval);
- break;
-
- case GPMC_STATUS_BUFFER:
- regval = gpmc_read_reg(GPMC_STATUS);
- /* 1 : buffer is available to write */
- status = regval & GPMC_STATUS_BUFF_EMPTY;
- break;
-
- default:
- printk(KERN_ERR "gpmc_read_status: Not supported\n");
- }
- return status;
-}
-EXPORT_SYMBOL(gpmc_read_status);
-
-/**
* gpmc_cs_configure - write request to configure gpmc
* @cs: chip select number
* @cmd: command type
@@ -614,121 +561,10 @@
}
EXPORT_SYMBOL(gpmc_cs_configure);
-/**
- * gpmc_nand_read - nand specific read access request
- * @cs: chip select number
- * @cmd: command type
- */
-int gpmc_nand_read(int cs, int cmd)
-{
- int rval = -EINVAL;
-
- switch (cmd) {
- case GPMC_NAND_DATA:
- rval = gpmc_cs_read_byte(cs, GPMC_CS_NAND_DATA);
- break;
-
- default:
- printk(KERN_ERR "gpmc_read_nand_ctrl: Not supported\n");
- }
- return rval;
-}
-EXPORT_SYMBOL(gpmc_nand_read);
-
-/**
- * gpmc_nand_write - nand specific write request
- * @cs: chip select number
- * @cmd: command type
- * @wval: value to write
- */
-int gpmc_nand_write(int cs, int cmd, int wval)
-{
- int err = 0;
-
- switch (cmd) {
- case GPMC_NAND_COMMAND:
- gpmc_cs_write_byte(cs, GPMC_CS_NAND_COMMAND, wval);
- break;
-
- case GPMC_NAND_ADDRESS:
- gpmc_cs_write_byte(cs, GPMC_CS_NAND_ADDRESS, wval);
- break;
-
- case GPMC_NAND_DATA:
- gpmc_cs_write_byte(cs, GPMC_CS_NAND_DATA, wval);
-
- default:
- printk(KERN_ERR "gpmc_write_nand_ctrl: Not supported\n");
- err = -EINVAL;
- }
- return err;
-}
-EXPORT_SYMBOL(gpmc_nand_write);
-
-
-
-/**
- * gpmc_prefetch_enable - configures and starts prefetch transfer
- * @cs: cs (chip select) number
- * @fifo_th: fifo threshold to be used for read/ write
- * @dma_mode: dma mode enable (1) or disable (0)
- * @u32_count: number of bytes to be transferred
- * @is_write: prefetch read(0) or write post(1) mode
- */
-int gpmc_prefetch_enable(int cs, int fifo_th, int dma_mode,
- unsigned int u32_count, int is_write)
-{
-
- if (fifo_th > PREFETCH_FIFOTHRESHOLD_MAX) {
- pr_err("gpmc: fifo threshold is not supported\n");
- return -1;
- } else if (!(gpmc_read_reg(GPMC_PREFETCH_CONTROL))) {
- /* Set the amount of bytes to be prefetched */
- gpmc_write_reg(GPMC_PREFETCH_CONFIG2, u32_count);
-
- /* Set dma/mpu mode, the prefetch read / post write and
- * enable the engine. Set which cs is has requested for.
- */
- gpmc_write_reg(GPMC_PREFETCH_CONFIG1, ((cs << CS_NUM_SHIFT) |
- PREFETCH_FIFOTHRESHOLD(fifo_th) |
- ENABLE_PREFETCH |
- (dma_mode << DMA_MPU_MODE) |
- (0x1 & is_write)));
-
- /* Start the prefetch engine */
- gpmc_write_reg(GPMC_PREFETCH_CONTROL, 0x1);
- } else {
- return -EBUSY;
- }
-
- return 0;
-}
-EXPORT_SYMBOL(gpmc_prefetch_enable);
-
-/**
- * gpmc_prefetch_reset - disables and stops the prefetch engine
- */
-int gpmc_prefetch_reset(int cs)
-{
- u32 config1;
-
- /* check if the same module/cs is trying to reset */
- config1 = gpmc_read_reg(GPMC_PREFETCH_CONFIG1);
- if (((config1 >> CS_NUM_SHIFT) & 0x7) != cs)
- return -EINVAL;
-
- /* Stop the PFPW engine */
- gpmc_write_reg(GPMC_PREFETCH_CONTROL, 0x0);
-
- /* Reset/disable the PFPW engine */
- gpmc_write_reg(GPMC_PREFETCH_CONFIG1, 0x0);
-
- return 0;
-}
-EXPORT_SYMBOL(gpmc_prefetch_reset);
-
void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs)
{
+ int i;
+
reg->gpmc_status = gpmc_base + GPMC_STATUS;
reg->gpmc_nand_command = gpmc_base + GPMC_CS0_OFFSET +
GPMC_CS_NAND_COMMAND + GPMC_CS_SIZE * cs;
@@ -744,7 +580,17 @@
reg->gpmc_ecc_control = gpmc_base + GPMC_ECC_CONTROL;
reg->gpmc_ecc_size_config = gpmc_base + GPMC_ECC_SIZE_CONFIG;
reg->gpmc_ecc1_result = gpmc_base + GPMC_ECC1_RESULT;
- reg->gpmc_bch_result0 = gpmc_base + GPMC_ECC_BCH_RESULT_0;
+
+ for (i = 0; i < GPMC_BCH_NUM_REMAINDER; i++) {
+ reg->gpmc_bch_result0[i] = gpmc_base + GPMC_ECC_BCH_RESULT_0 +
+ GPMC_BCH_SIZE * i;
+ reg->gpmc_bch_result1[i] = gpmc_base + GPMC_ECC_BCH_RESULT_1 +
+ GPMC_BCH_SIZE * i;
+ reg->gpmc_bch_result2[i] = gpmc_base + GPMC_ECC_BCH_RESULT_2 +
+ GPMC_BCH_SIZE * i;
+ reg->gpmc_bch_result3[i] = gpmc_base + GPMC_ECC_BCH_RESULT_3 +
+ GPMC_BCH_SIZE * i;
+ }
}
int gpmc_get_client_irq(unsigned irq_config)
@@ -1093,267 +939,3 @@
}
}
#endif /* CONFIG_ARCH_OMAP3 */
-
-/**
- * gpmc_enable_hwecc - enable hardware ecc functionality
- * @cs: chip select number
- * @mode: read/write mode
- * @dev_width: device bus width(1 for x16, 0 for x8)
- * @ecc_size: bytes for which ECC will be generated
- */
-int gpmc_enable_hwecc(int cs, int mode, int dev_width, int ecc_size)
-{
- unsigned int val;
-
- /* check if ecc module is in used */
- if (gpmc_ecc_used != -EINVAL)
- return -EINVAL;
-
- gpmc_ecc_used = cs;
-
- /* clear ecc and enable bits */
- gpmc_write_reg(GPMC_ECC_CONTROL,
- GPMC_ECC_CTRL_ECCCLEAR |
- GPMC_ECC_CTRL_ECCREG1);
-
- /* program ecc and result sizes */
- val = ((((ecc_size >> 1) - 1) << 22) | (0x0000000F));
- gpmc_write_reg(GPMC_ECC_SIZE_CONFIG, val);
-
- switch (mode) {
- case GPMC_ECC_READ:
- case GPMC_ECC_WRITE:
- gpmc_write_reg(GPMC_ECC_CONTROL,
- GPMC_ECC_CTRL_ECCCLEAR |
- GPMC_ECC_CTRL_ECCREG1);
- break;
- case GPMC_ECC_READSYN:
- gpmc_write_reg(GPMC_ECC_CONTROL,
- GPMC_ECC_CTRL_ECCCLEAR |
- GPMC_ECC_CTRL_ECCDISABLE);
- break;
- default:
- printk(KERN_INFO "Error: Unrecognized Mode[%d]!\n", mode);
- break;
- }
-
- /* (ECC 16 or 8 bit col) | ( CS ) | ECC Enable */
- val = (dev_width << 7) | (cs << 1) | (0x1);
- gpmc_write_reg(GPMC_ECC_CONFIG, val);
- return 0;
-}
-EXPORT_SYMBOL_GPL(gpmc_enable_hwecc);
-
-/**
- * gpmc_calculate_ecc - generate non-inverted ecc bytes
- * @cs: chip select number
- * @dat: data pointer over which ecc is computed
- * @ecc_code: ecc code buffer
- *
- * Using non-inverted ECC is considered ugly since writing a blank
- * page (padding) will clear the ECC bytes. This is not a problem as long
- * no one is trying to write data on the seemingly unused page. Reading
- * an erased page will produce an ECC mismatch between generated and read
- * ECC bytes that has to be dealt with separately.
- */
-int gpmc_calculate_ecc(int cs, const u_char *dat, u_char *ecc_code)
-{
- unsigned int val = 0x0;
-
- if (gpmc_ecc_used != cs)
- return -EINVAL;
-
- /* read ecc result */
- val = gpmc_read_reg(GPMC_ECC1_RESULT);
- *ecc_code++ = val; /* P128e, ..., P1e */
- *ecc_code++ = val >> 16; /* P128o, ..., P1o */
- /* P2048o, P1024o, P512o, P256o, P2048e, P1024e, P512e, P256e */
- *ecc_code++ = ((val >> 8) & 0x0f) | ((val >> 20) & 0xf0);
-
- gpmc_ecc_used = -EINVAL;
- return 0;
-}
-EXPORT_SYMBOL_GPL(gpmc_calculate_ecc);
-
-#ifdef CONFIG_ARCH_OMAP3
-
-/**
- * gpmc_init_hwecc_bch - initialize hardware BCH ecc functionality
- * @cs: chip select number
- * @nsectors: how many 512-byte sectors to process
- * @nerrors: how many errors to correct per sector (4 or 8)
- *
- * This function must be executed before any call to gpmc_enable_hwecc_bch.
- */
-int gpmc_init_hwecc_bch(int cs, int nsectors, int nerrors)
-{
- /* check if ecc module is in use */
- if (gpmc_ecc_used != -EINVAL)
- return -EINVAL;
-
- /* support only OMAP3 class */
- if (!cpu_is_omap34xx()) {
- printk(KERN_ERR "BCH ecc is not supported on this CPU\n");
- return -EINVAL;
- }
-
- /*
- * For now, assume 4-bit mode is only supported on OMAP3630 ES1.x, x>=1.
- * Other chips may be added if confirmed to work.
- */
- if ((nerrors == 4) &&
- (!cpu_is_omap3630() || (GET_OMAP_REVISION() == 0))) {
- printk(KERN_ERR "BCH 4-bit mode is not supported on this CPU\n");
- return -EINVAL;
- }
-
- /* sanity check */
- if (nsectors > 8) {
- printk(KERN_ERR "BCH cannot process %d sectors (max is 8)\n",
- nsectors);
- return -EINVAL;
- }
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(gpmc_init_hwecc_bch);
-
-/**
- * gpmc_enable_hwecc_bch - enable hardware BCH ecc functionality
- * @cs: chip select number
- * @mode: read/write mode
- * @dev_width: device bus width(1 for x16, 0 for x8)
- * @nsectors: how many 512-byte sectors to process
- * @nerrors: how many errors to correct per sector (4 or 8)
- */
-int gpmc_enable_hwecc_bch(int cs, int mode, int dev_width, int nsectors,
- int nerrors)
-{
- unsigned int val;
-
- /* check if ecc module is in use */
- if (gpmc_ecc_used != -EINVAL)
- return -EINVAL;
-
- gpmc_ecc_used = cs;
-
- /* clear ecc and enable bits */
- gpmc_write_reg(GPMC_ECC_CONTROL, 0x1);
-
- /*
- * When using BCH, sector size is hardcoded to 512 bytes.
- * Here we are using wrapping mode 6 both for reading and writing, with:
- * size0 = 0 (no additional protected byte in spare area)
- * size1 = 32 (skip 32 nibbles = 16 bytes per sector in spare area)
- */
- gpmc_write_reg(GPMC_ECC_SIZE_CONFIG, (32 << 22) | (0 << 12));
-
- /* BCH configuration */
- val = ((1 << 16) | /* enable BCH */
- (((nerrors == 8) ? 1 : 0) << 12) | /* 8 or 4 bits */
- (0x06 << 8) | /* wrap mode = 6 */
- (dev_width << 7) | /* bus width */
- (((nsectors-1) & 0x7) << 4) | /* number of sectors */
- (cs << 1) | /* ECC CS */
- (0x1)); /* enable ECC */
-
- gpmc_write_reg(GPMC_ECC_CONFIG, val);
- gpmc_write_reg(GPMC_ECC_CONTROL, 0x101);
- return 0;
-}
-EXPORT_SYMBOL_GPL(gpmc_enable_hwecc_bch);
-
-/**
- * gpmc_calculate_ecc_bch4 - Generate 7 ecc bytes per sector of 512 data bytes
- * @cs: chip select number
- * @dat: The pointer to data on which ecc is computed
- * @ecc: The ecc output buffer
- */
-int gpmc_calculate_ecc_bch4(int cs, const u_char *dat, u_char *ecc)
-{
- int i;
- unsigned long nsectors, reg, val1, val2;
-
- if (gpmc_ecc_used != cs)
- return -EINVAL;
-
- nsectors = ((gpmc_read_reg(GPMC_ECC_CONFIG) >> 4) & 0x7) + 1;
-
- for (i = 0; i < nsectors; i++) {
-
- reg = GPMC_ECC_BCH_RESULT_0 + 16*i;
-
- /* Read hw-computed remainder */
- val1 = gpmc_read_reg(reg + 0);
- val2 = gpmc_read_reg(reg + 4);
-
- /*
- * Add constant polynomial to remainder, in order to get an ecc
- * sequence of 0xFFs for a buffer filled with 0xFFs; and
- * left-justify the resulting polynomial.
- */
- *ecc++ = 0x28 ^ ((val2 >> 12) & 0xFF);
- *ecc++ = 0x13 ^ ((val2 >> 4) & 0xFF);
- *ecc++ = 0xcc ^ (((val2 & 0xF) << 4)|((val1 >> 28) & 0xF));
- *ecc++ = 0x39 ^ ((val1 >> 20) & 0xFF);
- *ecc++ = 0x96 ^ ((val1 >> 12) & 0xFF);
- *ecc++ = 0xac ^ ((val1 >> 4) & 0xFF);
- *ecc++ = 0x7f ^ ((val1 & 0xF) << 4);
- }
-
- gpmc_ecc_used = -EINVAL;
- return 0;
-}
-EXPORT_SYMBOL_GPL(gpmc_calculate_ecc_bch4);
-
-/**
- * gpmc_calculate_ecc_bch8 - Generate 13 ecc bytes per block of 512 data bytes
- * @cs: chip select number
- * @dat: The pointer to data on which ecc is computed
- * @ecc: The ecc output buffer
- */
-int gpmc_calculate_ecc_bch8(int cs, const u_char *dat, u_char *ecc)
-{
- int i;
- unsigned long nsectors, reg, val1, val2, val3, val4;
-
- if (gpmc_ecc_used != cs)
- return -EINVAL;
-
- nsectors = ((gpmc_read_reg(GPMC_ECC_CONFIG) >> 4) & 0x7) + 1;
-
- for (i = 0; i < nsectors; i++) {
-
- reg = GPMC_ECC_BCH_RESULT_0 + 16*i;
-
- /* Read hw-computed remainder */
- val1 = gpmc_read_reg(reg + 0);
- val2 = gpmc_read_reg(reg + 4);
- val3 = gpmc_read_reg(reg + 8);
- val4 = gpmc_read_reg(reg + 12);
-
- /*
- * Add constant polynomial to remainder, in order to get an ecc
- * sequence of 0xFFs for a buffer filled with 0xFFs.
- */
- *ecc++ = 0xef ^ (val4 & 0xFF);
- *ecc++ = 0x51 ^ ((val3 >> 24) & 0xFF);
- *ecc++ = 0x2e ^ ((val3 >> 16) & 0xFF);
- *ecc++ = 0x09 ^ ((val3 >> 8) & 0xFF);
- *ecc++ = 0xed ^ (val3 & 0xFF);
- *ecc++ = 0x93 ^ ((val2 >> 24) & 0xFF);
- *ecc++ = 0x9a ^ ((val2 >> 16) & 0xFF);
- *ecc++ = 0xc2 ^ ((val2 >> 8) & 0xFF);
- *ecc++ = 0x97 ^ (val2 & 0xFF);
- *ecc++ = 0x79 ^ ((val1 >> 24) & 0xFF);
- *ecc++ = 0xe5 ^ ((val1 >> 16) & 0xFF);
- *ecc++ = 0x24 ^ ((val1 >> 8) & 0xFF);
- *ecc++ = 0xb5 ^ (val1 & 0xFF);
- }
-
- gpmc_ecc_used = -EINVAL;
- return 0;
-}
-EXPORT_SYMBOL_GPL(gpmc_calculate_ecc_bch8);
-
-#endif /* CONFIG_ARCH_OMAP3 */
diff --git a/arch/arm/plat-omap/include/plat/gpmc.h b/arch/arm/mach-omap2/gpmc.h
similarity index 67%
rename from arch/arm/plat-omap/include/plat/gpmc.h
rename to arch/arm/mach-omap2/gpmc.h
index 2e6e259..79f4dfc 100644
--- a/arch/arm/plat-omap/include/plat/gpmc.h
+++ b/arch/arm/mach-omap2/gpmc.h
@@ -11,6 +11,8 @@
#ifndef __OMAP2_GPMC_H
#define __OMAP2_GPMC_H
+#include <linux/platform_data/mtd-nand-omap2.h>
+
/* Maximum Number of Chip Selects */
#define GPMC_CS_NUM 8
@@ -32,15 +34,6 @@
#define GPMC_SET_IRQ_STATUS 0x00000004
#define GPMC_CONFIG_WP 0x00000005
-#define GPMC_GET_IRQ_STATUS 0x00000006
-#define GPMC_PREFETCH_FIFO_CNT 0x00000007 /* bytes available in FIFO for r/w */
-#define GPMC_PREFETCH_COUNT 0x00000008 /* remaining bytes to be read/write*/
-#define GPMC_STATUS_BUFFER 0x00000009 /* 1: buffer is available to write */
-
-#define GPMC_NAND_COMMAND 0x0000000a
-#define GPMC_NAND_ADDRESS 0x0000000b
-#define GPMC_NAND_DATA 0x0000000c
-
#define GPMC_ENABLE_IRQ 0x0000000d
/* ECC commands */
@@ -76,25 +69,10 @@
#define GPMC_DEVICETYPE_NOR 0
#define GPMC_DEVICETYPE_NAND 2
#define GPMC_CONFIG_WRITEPROTECT 0x00000010
-#define GPMC_STATUS_BUFF_EMPTY 0x00000001
#define WR_RD_PIN_MONITORING 0x00600000
-#define GPMC_PREFETCH_STATUS_FIFO_CNT(val) ((val >> 24) & 0x7F)
-#define GPMC_PREFETCH_STATUS_COUNT(val) (val & 0x00003fff)
#define GPMC_IRQ_FIFOEVENTENABLE 0x01
#define GPMC_IRQ_COUNT_EVENT 0x02
-#define PREFETCH_FIFOTHRESHOLD_MAX 0x40
-#define PREFETCH_FIFOTHRESHOLD(val) ((val) << 8)
-
-enum omap_ecc {
- /* 1-bit ecc: stored at end of spare area */
- OMAP_ECC_HAMMING_CODE_DEFAULT = 0, /* Default, s/w method */
- OMAP_ECC_HAMMING_CODE_HW, /* gpmc to detect the error */
- /* 1-bit ecc: stored at beginning of spare area as romcode */
- OMAP_ECC_HAMMING_CODE_HW_ROMCODE, /* gpmc method & romcode layout */
- OMAP_ECC_BCH4_CODE_HW, /* 4-bit BCH ecc code */
- OMAP_ECC_BCH8_CODE_HW, /* 8-bit BCH ecc code */
-};
/*
* Note that all values in this struct are in nanoseconds except sync_clk
@@ -133,22 +111,6 @@
u16 wr_data_mux_bus; /* WRDATAONADMUXBUS */
};
-struct gpmc_nand_regs {
- void __iomem *gpmc_status;
- void __iomem *gpmc_nand_command;
- void __iomem *gpmc_nand_address;
- void __iomem *gpmc_nand_data;
- void __iomem *gpmc_prefetch_config1;
- void __iomem *gpmc_prefetch_config2;
- void __iomem *gpmc_prefetch_control;
- void __iomem *gpmc_prefetch_status;
- void __iomem *gpmc_ecc_config;
- void __iomem *gpmc_ecc_control;
- void __iomem *gpmc_ecc_size_config;
- void __iomem *gpmc_ecc1_result;
- void __iomem *gpmc_bch_result0;
-};
-
extern void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs);
extern int gpmc_get_client_irq(unsigned irq_config);
@@ -160,31 +122,14 @@
extern void gpmc_cs_write_reg(int cs, int idx, u32 val);
extern u32 gpmc_cs_read_reg(int cs, int idx);
-extern int gpmc_cs_calc_divider(int cs, unsigned int sync_clk);
+extern int gpmc_calc_divider(unsigned int sync_clk);
extern int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t);
extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base);
extern void gpmc_cs_free(int cs);
extern int gpmc_cs_set_reserved(int cs, int reserved);
extern int gpmc_cs_reserved(int cs);
-extern int gpmc_prefetch_enable(int cs, int fifo_th, int dma_mode,
- unsigned int u32_count, int is_write);
-extern int gpmc_prefetch_reset(int cs);
extern void omap3_gpmc_save_context(void);
extern void omap3_gpmc_restore_context(void);
-extern int gpmc_read_status(int cmd);
extern int gpmc_cs_configure(int cs, int cmd, int wval);
-extern int gpmc_nand_read(int cs, int cmd);
-extern int gpmc_nand_write(int cs, int cmd, int wval);
-
-int gpmc_enable_hwecc(int cs, int mode, int dev_width, int ecc_size);
-int gpmc_calculate_ecc(int cs, const u_char *dat, u_char *ecc_code);
-
-#ifdef CONFIG_ARCH_OMAP3
-int gpmc_init_hwecc_bch(int cs, int nsectors, int nerrors);
-int gpmc_enable_hwecc_bch(int cs, int mode, int dev_width, int nsectors,
- int nerrors);
-int gpmc_calculate_ecc_bch4(int cs, const u_char *dat, u_char *ecc);
-int gpmc_calculate_ecc_bch8(int cs, const u_char *dat, u_char *ecc);
-#endif /* CONFIG_ARCH_OMAP3 */
#endif
diff --git a/arch/arm/mach-omap2/hdq1w.c b/arch/arm/mach-omap2/hdq1w.c
index e003f2b..ab7bf18 100644
--- a/arch/arm/mach-omap2/hdq1w.c
+++ b/arch/arm/mach-omap2/hdq1w.c
@@ -27,15 +27,13 @@
#include <linux/err.h>
#include <linux/platform_device.h>
-#include <plat/omap_hwmod.h>
-#include <plat/omap_device.h>
+#include "omap_hwmod.h"
+#include "omap_device.h"
#include "hdq1w.h"
+#include "prm.h"
#include "common.h"
-/* Maximum microseconds to wait for OMAP module to softreset */
-#define MAX_MODULE_SOFTRESET_WAIT 10000
-
/**
* omap_hdq1w_reset - reset the OMAP HDQ1W module
* @oh: struct omap_hwmod *
diff --git a/arch/arm/mach-omap2/hdq1w.h b/arch/arm/mach-omap2/hdq1w.h
index 0c1efc8..c7e08d2 100644
--- a/arch/arm/mach-omap2/hdq1w.h
+++ b/arch/arm/mach-omap2/hdq1w.h
@@ -21,7 +21,7 @@
#ifndef ARCH_ARM_MACH_OMAP2_HDQ1W_H
#define ARCH_ARM_MACH_OMAP2_HDQ1W_H
-#include <plat/omap_hwmod.h>
+#include "omap_hwmod.h"
/*
* XXX A future cleanup patch should modify
diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
index 4d3a632..4a96433 100644
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -14,14 +14,14 @@
#include <linux/string.h>
#include <linux/delay.h>
#include <linux/gpio.h>
-#include <mach/hardware.h>
#include <linux/platform_data/gpio-omap.h>
-#include <plat/mmc.h>
-#include <plat/omap-pm.h>
-#include <plat/omap_device.h>
+#include "soc.h"
+#include "omap_device.h"
+#include "omap-pm.h"
#include "mux.h"
+#include "mmc.h"
#include "hsmmc.h"
#include "control.h"
diff --git a/arch/arm/mach-omap2/hwspinlock.c b/arch/arm/mach-omap2/hwspinlock.c
index 8763c85..1df9b5f 100644
--- a/arch/arm/mach-omap2/hwspinlock.c
+++ b/arch/arm/mach-omap2/hwspinlock.c
@@ -21,8 +21,8 @@
#include <linux/err.h>
#include <linux/hwspinlock.h>
-#include <plat/omap_hwmod.h>
-#include <plat/omap_device.h>
+#include "omap_hwmod.h"
+#include "omap_device.h"
static struct hwspinlock_pdata omap_hwspinlock_pdata __initdata = {
.base_id = 0,
diff --git a/arch/arm/mach-omap2/i2c.c b/arch/arm/mach-omap2/i2c.c
index fc57e67..fbb9b15 100644
--- a/arch/arm/mach-omap2/i2c.c
+++ b/arch/arm/mach-omap2/i2c.c
@@ -19,21 +19,23 @@
*
*/
-#include <plat/i2c.h>
-#include "common.h"
-#include <plat/omap_hwmod.h>
+#include "soc.h"
+#include "omap_hwmod.h"
+#include "omap_device.h"
+#include "prm.h"
+#include "common.h"
#include "mux.h"
+#include "i2c.h"
/* In register I2C_CON, Bit 15 is the I2C enable bit */
#define I2C_EN BIT(15)
#define OMAP2_I2C_CON_OFFSET 0x24
#define OMAP4_I2C_CON_OFFSET 0xA4
-/* Maximum microseconds to wait for OMAP module to softreset */
-#define MAX_MODULE_SOFTRESET_WAIT 10000
+#define MAX_OMAP_I2C_HWMOD_NAME_LEN 16
-void __init omap2_i2c_mux_pins(int bus_id)
+static void __init omap2_i2c_mux_pins(int bus_id)
{
char mux_name[sizeof("i2c2_scl.i2c2_scl")];
@@ -104,3 +106,62 @@
return 0;
}
+
+static int __init omap_i2c_nr_ports(void)
+{
+ int ports = 0;
+
+ if (cpu_is_omap24xx())
+ ports = 2;
+ else if (cpu_is_omap34xx())
+ ports = 3;
+ else if (cpu_is_omap44xx())
+ ports = 4;
+ return ports;
+}
+
+static const char name[] = "omap_i2c";
+
+int __init omap_i2c_add_bus(struct omap_i2c_bus_platform_data *i2c_pdata,
+ int bus_id)
+{
+ int l;
+ struct omap_hwmod *oh;
+ struct platform_device *pdev;
+ char oh_name[MAX_OMAP_I2C_HWMOD_NAME_LEN];
+ struct omap_i2c_bus_platform_data *pdata;
+ struct omap_i2c_dev_attr *dev_attr;
+
+ if (bus_id > omap_i2c_nr_ports())
+ return -EINVAL;
+
+ omap2_i2c_mux_pins(bus_id);
+
+ l = snprintf(oh_name, MAX_OMAP_I2C_HWMOD_NAME_LEN, "i2c%d", bus_id);
+ WARN(l >= MAX_OMAP_I2C_HWMOD_NAME_LEN,
+ "String buffer overflow in I2C%d device setup\n", bus_id);
+ oh = omap_hwmod_lookup(oh_name);
+ if (!oh) {
+ pr_err("Could not look up %s\n", oh_name);
+ return -EEXIST;
+ }
+
+ pdata = i2c_pdata;
+ /*
+ * pass the hwmod class's CPU-specific knowledge of I2C IP revision in
+ * use, and functionality implementation flags, up to the OMAP I2C
+ * driver via platform data
+ */
+ pdata->rev = oh->class->rev;
+
+ dev_attr = (struct omap_i2c_dev_attr *)oh->dev_attr;
+ pdata->flags = dev_attr->flags;
+
+ pdev = omap_device_build(name, bus_id, oh, pdata,
+ sizeof(struct omap_i2c_bus_platform_data),
+ NULL, 0, 0);
+ WARN(IS_ERR(pdev), "Could not build omap_device for %s\n", name);
+
+ return PTR_RET(pdev);
+}
+
diff --git a/arch/arm/mach-omap2/i2c.h b/arch/arm/mach-omap2/i2c.h
new file mode 100644
index 0000000..42b6f2e
--- /dev/null
+++ b/arch/arm/mach-omap2/i2c.h
@@ -0,0 +1,42 @@
+/*
+ * Helper module for board specific I2C bus registration
+ *
+ * Copyright (C) 2009 Nokia Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <plat/i2c.h>
+
+#ifndef __MACH_OMAP2_I2C_H
+#define __MACH_OMAP2_I2C_H
+
+/**
+ * i2c_dev_attr - OMAP I2C controller device attributes for omap_hwmod
+ * @fifo_depth: total controller FIFO size (in bytes)
+ * @flags: differences in hardware support capability
+ *
+ * @fifo_depth represents what exists on the hardware, not what is
+ * actually configured at runtime by the device driver.
+ */
+struct omap_i2c_dev_attr {
+ u8 fifo_depth;
+ u32 flags;
+};
+
+int omap_i2c_reset(struct omap_hwmod *oh);
+
+#endif /* __MACH_OMAP2_I2C_H */
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index cf2362c..45cc7ed4 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -28,6 +28,9 @@
#include "soc.h"
#include "control.h"
+#define OMAP4_SILICON_TYPE_STANDARD 0x01
+#define OMAP4_SILICON_TYPE_PERFORMANCE 0x02
+
static unsigned int omap_revision;
static const char *cpu_rev;
u32 omap_features;
@@ -273,25 +276,11 @@
{
u32 si_type;
- if (cpu_is_omap443x())
- omap_features |= OMAP4_HAS_MPU_1GHZ;
+ si_type =
+ (read_tap_reg(OMAP4_CTRL_MODULE_CORE_STD_FUSE_PROD_ID_1) >> 16) & 0x03;
-
- if (cpu_is_omap446x()) {
- si_type =
- read_tap_reg(OMAP4_CTRL_MODULE_CORE_STD_FUSE_PROD_ID_1);
- switch ((si_type & (3 << 16)) >> 16) {
- case 2:
- /* High performance device */
- omap_features |= OMAP4_HAS_MPU_1_5GHZ;
- break;
- case 1:
- default:
- /* Standard device */
- omap_features |= OMAP4_HAS_MPU_1_2GHZ;
- break;
- }
- }
+ if (si_type == OMAP4_SILICON_TYPE_PERFORMANCE)
+ omap_features = OMAP4_HAS_PERF_SILICON;
}
void __init ti81xx_check_features(void)
@@ -559,11 +548,12 @@
* detect the exact revision later on in omap2_detect_revision() once map_io
* is done.
*/
-void __init omap2_set_globals_tap(struct omap_globals *omap2_globals)
+void __init omap2_set_globals_tap(u32 class, void __iomem *tap)
{
- omap_revision = omap2_globals->class;
- tap_base = omap2_globals->tap;
+ omap_revision = class;
+ tap_base = tap;
+ /* XXX What is this intended to do? */
if (cpu_is_omap34xx())
tap_prod_id = 0x0210;
else
diff --git a/arch/arm/mach-omap2/include/mach/debug-macro.S b/arch/arm/mach-omap2/include/mach/debug-macro.S
index 93d10de..cfaed13 100644
--- a/arch/arm/mach-omap2/include/mach/debug-macro.S
+++ b/arch/arm/mach-omap2/include/mach/debug-macro.S
@@ -13,7 +13,7 @@
#include <linux/serial_reg.h>
-#include <plat/serial.h>
+#include <mach/serial.h>
#define UART_OFFSET(addr) ((addr) & 0x00ffffff)
diff --git a/arch/arm/mach-omap2/include/mach/gpio.h b/arch/arm/mach-omap2/include/mach/gpio.h
deleted file mode 100644
index 5621cc5..0000000
--- a/arch/arm/mach-omap2/include/mach/gpio.h
+++ /dev/null
@@ -1,3 +0,0 @@
-/*
- * arch/arm/mach-omap2/include/mach/gpio.h
- */
diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/mach-omap2/include/mach/serial.h
similarity index 80%
rename from arch/arm/plat-omap/include/plat/serial.h
rename to arch/arm/mach-omap2/include/mach/serial.h
index 65fce44..70eda00 100644
--- a/arch/arm/plat-omap/include/plat/serial.h
+++ b/arch/arm/mach-omap2/include/mach/serial.h
@@ -1,6 +1,4 @@
/*
- * arch/arm/plat-omap/include/mach/serial.h
- *
* Copyright (C) 2009 Texas Instruments
* Added OMAP4 support- Santosh Shilimkar <santosh.shilimkar@ti.com>
*
@@ -10,11 +8,6 @@
* GNU General Public License for more details.
*/
-#ifndef __ASM_ARCH_SERIAL_H
-#define __ASM_ARCH_SERIAL_H
-
-#include <linux/init.h>
-
/*
* Memory entry used for the DEBUG_LL UART configuration, relative to
* start of RAM. See also uncompress.h and debug-macro.S.
@@ -29,11 +22,6 @@
*/
#define OMAP_UART_INFO_OFS 0x3ffc
-/* OMAP1 serial ports */
-#define OMAP1_UART1_BASE 0xfffb0000
-#define OMAP1_UART2_BASE 0xfffb0800
-#define OMAP1_UART3_BASE 0xfffb9800
-
/* OMAP2 serial ports */
#define OMAP2_UART1_BASE 0x4806a000
#define OMAP2_UART2_BASE 0x4806c000
@@ -76,20 +64,14 @@
#define ZOOM_UART_VIRT 0xfa400000
#define OMAP_PORT_SHIFT 2
-#define OMAP7XX_PORT_SHIFT 0
#define ZOOM_PORT_SHIFT 1
-#define OMAP1510_BASE_BAUD (12000000/16)
-#define OMAP16XX_BASE_BAUD (48000000/16)
#define OMAP24XX_BASE_BAUD (48000000/16)
/*
* DEBUG_LL port encoding stored into the UART1 scratchpad register by
* decomp_setup in uncompress.h
*/
-#define OMAP1UART1 11
-#define OMAP1UART2 12
-#define OMAP1UART3 13
#define OMAP2UART1 21
#define OMAP2UART2 22
#define OMAP2UART3 23
@@ -109,15 +91,6 @@
#define OMAP5UART4 OMAP4UART4
#define ZOOM_UART 95 /* Only on zoom2/3 */
-/* This is only used by 8250.c for omap1510 */
-#define is_omap_port(pt) ({int __ret = 0; \
- if ((pt)->port.mapbase == OMAP1_UART1_BASE || \
- (pt)->port.mapbase == OMAP1_UART2_BASE || \
- (pt)->port.mapbase == OMAP1_UART3_BASE) \
- __ret = 1; \
- __ret; \
- })
-
#ifndef __ASSEMBLER__
struct omap_board_data;
@@ -128,5 +101,3 @@
extern void omap_serial_init_port(struct omap_board_data *bdata,
struct omap_uart_port_info *platform_data);
#endif
-
-#endif
diff --git a/arch/arm/mach-omap2/include/mach/uncompress.h b/arch/arm/mach-omap2/include/mach/uncompress.h
index 78e0557b..8e3546d 100644
--- a/arch/arm/mach-omap2/include/mach/uncompress.h
+++ b/arch/arm/mach-omap2/include/mach/uncompress.h
@@ -1,5 +1,176 @@
/*
- * arch/arm/mach-omap2/include/mach/uncompress.h
+ * arch/arm/plat-omap/include/mach/uncompress.h
+ *
+ * Serial port stubs for kernel decompress status messages
+ *
+ * Initially based on:
+ * linux-2.4.15-rmk1-dsplinux1.6/arch/arm/plat-omap/include/mach1510/uncompress.h
+ * Copyright (C) 2000 RidgeRun, Inc.
+ * Author: Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * Rewritten by:
+ * Author: <source@mvista.com>
+ * 2004 (c) MontaVista Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
*/
-#include <plat/uncompress.h>
+#include <linux/types.h>
+#include <linux/serial_reg.h>
+
+#include <asm/memory.h>
+#include <asm/mach-types.h>
+
+#include <mach/serial.h>
+
+#define MDR1_MODE_MASK 0x07
+
+volatile u8 *uart_base;
+int uart_shift;
+
+/*
+ * Store the DEBUG_LL uart number into memory.
+ * See also debug-macro.S, and serial.c for related code.
+ */
+static void set_omap_uart_info(unsigned char port)
+{
+ /*
+ * Get address of some.bss variable and round it down
+ * a la CONFIG_AUTO_ZRELADDR.
+ */
+ u32 ram_start = (u32)&uart_shift & 0xf8000000;
+ u32 *uart_info = (u32 *)(ram_start + OMAP_UART_INFO_OFS);
+ *uart_info = port;
+}
+
+static void putc(int c)
+{
+ if (!uart_base)
+ return;
+
+ /* Check for UART 16x mode */
+ if ((uart_base[UART_OMAP_MDR1 << uart_shift] & MDR1_MODE_MASK) != 0)
+ return;
+
+ while (!(uart_base[UART_LSR << uart_shift] & UART_LSR_THRE))
+ barrier();
+ uart_base[UART_TX << uart_shift] = c;
+}
+
+static inline void flush(void)
+{
+}
+
+/*
+ * Macros to configure UART1 and debug UART
+ */
+#define _DEBUG_LL_ENTRY(mach, dbg_uart, dbg_shft, dbg_id) \
+ if (machine_is_##mach()) { \
+ uart_base = (volatile u8 *)(dbg_uart); \
+ uart_shift = (dbg_shft); \
+ port = (dbg_id); \
+ set_omap_uart_info(port); \
+ break; \
+ }
+
+#define DEBUG_LL_OMAP2(p, mach) \
+ _DEBUG_LL_ENTRY(mach, OMAP2_UART##p##_BASE, OMAP_PORT_SHIFT, \
+ OMAP2UART##p)
+
+#define DEBUG_LL_OMAP3(p, mach) \
+ _DEBUG_LL_ENTRY(mach, OMAP3_UART##p##_BASE, OMAP_PORT_SHIFT, \
+ OMAP3UART##p)
+
+#define DEBUG_LL_OMAP4(p, mach) \
+ _DEBUG_LL_ENTRY(mach, OMAP4_UART##p##_BASE, OMAP_PORT_SHIFT, \
+ OMAP4UART##p)
+
+#define DEBUG_LL_OMAP5(p, mach) \
+ _DEBUG_LL_ENTRY(mach, OMAP5_UART##p##_BASE, OMAP_PORT_SHIFT, \
+ OMAP5UART##p)
+/* Zoom2/3 shift is different for UART1 and external port */
+#define DEBUG_LL_ZOOM(mach) \
+ _DEBUG_LL_ENTRY(mach, ZOOM_UART_BASE, ZOOM_PORT_SHIFT, ZOOM_UART)
+
+#define DEBUG_LL_TI81XX(p, mach) \
+ _DEBUG_LL_ENTRY(mach, TI81XX_UART##p##_BASE, OMAP_PORT_SHIFT, \
+ TI81XXUART##p)
+
+#define DEBUG_LL_AM33XX(p, mach) \
+ _DEBUG_LL_ENTRY(mach, AM33XX_UART##p##_BASE, OMAP_PORT_SHIFT, \
+ AM33XXUART##p)
+
+static inline void arch_decomp_setup(void)
+{
+ int port = 0;
+
+ /*
+ * Initialize the port based on the machine ID from the bootloader.
+ * Note that we're using macros here instead of switch statement
+ * as machine_is functions are optimized out for the boards that
+ * are not selected.
+ */
+ do {
+ /* omap2 based boards using UART1 */
+ DEBUG_LL_OMAP2(1, omap_2430sdp);
+ DEBUG_LL_OMAP2(1, omap_apollon);
+ DEBUG_LL_OMAP2(1, omap_h4);
+
+ /* omap2 based boards using UART3 */
+ DEBUG_LL_OMAP2(3, nokia_n800);
+ DEBUG_LL_OMAP2(3, nokia_n810);
+ DEBUG_LL_OMAP2(3, nokia_n810_wimax);
+
+ /* omap3 based boards using UART1 */
+ DEBUG_LL_OMAP2(1, omap3evm);
+ DEBUG_LL_OMAP3(1, omap_3430sdp);
+ DEBUG_LL_OMAP3(1, omap_3630sdp);
+ DEBUG_LL_OMAP3(1, omap3530_lv_som);
+ DEBUG_LL_OMAP3(1, omap3_torpedo);
+
+ /* omap3 based boards using UART3 */
+ DEBUG_LL_OMAP3(3, cm_t35);
+ DEBUG_LL_OMAP3(3, cm_t3517);
+ DEBUG_LL_OMAP3(3, cm_t3730);
+ DEBUG_LL_OMAP3(3, craneboard);
+ DEBUG_LL_OMAP3(3, devkit8000);
+ DEBUG_LL_OMAP3(3, igep0020);
+ DEBUG_LL_OMAP3(3, igep0030);
+ DEBUG_LL_OMAP3(3, nokia_rm680);
+ DEBUG_LL_OMAP3(3, nokia_rm696);
+ DEBUG_LL_OMAP3(3, nokia_rx51);
+ DEBUG_LL_OMAP3(3, omap3517evm);
+ DEBUG_LL_OMAP3(3, omap3_beagle);
+ DEBUG_LL_OMAP3(3, omap3_pandora);
+ DEBUG_LL_OMAP3(3, omap_ldp);
+ DEBUG_LL_OMAP3(3, overo);
+ DEBUG_LL_OMAP3(3, touchbook);
+
+ /* omap4 based boards using UART3 */
+ DEBUG_LL_OMAP4(3, omap_4430sdp);
+ DEBUG_LL_OMAP4(3, omap4_panda);
+
+ /* omap5 based boards using UART3 */
+ DEBUG_LL_OMAP5(3, omap5_sevm);
+
+ /* zoom2/3 external uart */
+ DEBUG_LL_ZOOM(omap_zoom2);
+ DEBUG_LL_ZOOM(omap_zoom3);
+
+ /* TI8168 base boards using UART3 */
+ DEBUG_LL_TI81XX(3, ti8168evm);
+
+ /* TI8148 base boards using UART1 */
+ DEBUG_LL_TI81XX(1, ti8148evm);
+
+ /* AM33XX base boards using UART1 */
+ DEBUG_LL_AM33XX(1, am335xevm);
+ } while (0);
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 4234d28..9df7576 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -25,14 +25,9 @@
#include <asm/tlb.h>
#include <asm/mach/map.h>
-#include <plat/sram.h>
-#include <plat/sdrc.h>
-#include <plat/serial.h>
-#include <plat/omap-pm.h>
-#include <plat/omap_hwmod.h>
-#include <plat/multi.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
+#include "omap_hwmod.h"
#include "soc.h"
#include "iomap.h"
#include "voltage.h"
@@ -43,6 +38,18 @@
#include "clock2xxx.h"
#include "clock3xxx.h"
#include "clock44xx.h"
+#include "omap-pm.h"
+#include "sdrc.h"
+#include "control.h"
+#include "serial.h"
+#include "sram.h"
+#include "cm2xxx.h"
+#include "cm3xxx.h"
+#include "prm.h"
+#include "cm.h"
+#include "prcm_mpu44xx.h"
+#include "prminst44xx.h"
+#include "cminst44xx.h"
/*
* The machine specific code may provide the extra mapping besides the
@@ -265,7 +272,7 @@
#endif
#ifdef CONFIG_SOC_OMAP2420
-void __init omap242x_map_common_io(void)
+void __init omap242x_map_io(void)
{
iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc));
iotable_init(omap242x_io_desc, ARRAY_SIZE(omap242x_io_desc));
@@ -273,7 +280,7 @@
#endif
#ifdef CONFIG_SOC_OMAP2430
-void __init omap243x_map_common_io(void)
+void __init omap243x_map_io(void)
{
iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc));
iotable_init(omap243x_io_desc, ARRAY_SIZE(omap243x_io_desc));
@@ -281,28 +288,28 @@
#endif
#ifdef CONFIG_ARCH_OMAP3
-void __init omap34xx_map_common_io(void)
+void __init omap3_map_io(void)
{
iotable_init(omap34xx_io_desc, ARRAY_SIZE(omap34xx_io_desc));
}
#endif
#ifdef CONFIG_SOC_TI81XX
-void __init omapti81xx_map_common_io(void)
+void __init ti81xx_map_io(void)
{
iotable_init(omapti81xx_io_desc, ARRAY_SIZE(omapti81xx_io_desc));
}
#endif
#ifdef CONFIG_SOC_AM33XX
-void __init omapam33xx_map_common_io(void)
+void __init am33xx_map_io(void)
{
iotable_init(omapam33xx_io_desc, ARRAY_SIZE(omapam33xx_io_desc));
}
#endif
#ifdef CONFIG_ARCH_OMAP4
-void __init omap44xx_map_common_io(void)
+void __init omap4_map_io(void)
{
iotable_init(omap44xx_io_desc, ARRAY_SIZE(omap44xx_io_desc));
omap_barriers_init();
@@ -310,7 +317,7 @@
#endif
#ifdef CONFIG_SOC_OMAP5
-void __init omap5_map_common_io(void)
+void __init omap5_map_io(void)
{
iotable_init(omap54xx_io_desc, ARRAY_SIZE(omap54xx_io_desc));
}
@@ -354,11 +361,6 @@
return omap_hwmod_set_postsetup_state(oh, *(u8 *)data);
}
-static void __init omap_common_init_early(void)
-{
- omap_init_consistent_dma_size();
-}
-
static void __init omap_hwmod_init_postsetup(void)
{
u8 postsetup_state;
@@ -377,9 +379,15 @@
#ifdef CONFIG_SOC_OMAP2420
void __init omap2420_init_early(void)
{
- omap2_set_globals_242x();
+ omap2_set_globals_tap(OMAP242X_CLASS, OMAP2_L4_IO_ADDRESS(0x48014000));
+ omap2_set_globals_sdrc(OMAP2_L3_IO_ADDRESS(OMAP2420_SDRC_BASE),
+ OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE));
+ omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE),
+ NULL);
+ omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE));
+ omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP2420_CM_BASE), NULL);
omap2xxx_check_revision();
- omap_common_init_early();
+ omap2xxx_cm_init();
omap2xxx_voltagedomains_init();
omap242x_powerdomains_init();
omap242x_clockdomains_init();
@@ -399,9 +407,15 @@
#ifdef CONFIG_SOC_OMAP2430
void __init omap2430_init_early(void)
{
- omap2_set_globals_243x();
+ omap2_set_globals_tap(OMAP243X_CLASS, OMAP2_L4_IO_ADDRESS(0x4900a000));
+ omap2_set_globals_sdrc(OMAP2_L3_IO_ADDRESS(OMAP243X_SDRC_BASE),
+ OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE));
+ omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE),
+ NULL);
+ omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE));
+ omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE), NULL);
omap2xxx_check_revision();
- omap_common_init_early();
+ omap2xxx_cm_init();
omap2xxx_voltagedomains_init();
omap243x_powerdomains_init();
omap243x_clockdomains_init();
@@ -425,10 +439,16 @@
#ifdef CONFIG_ARCH_OMAP3
void __init omap3_init_early(void)
{
- omap2_set_globals_3xxx();
+ omap2_set_globals_tap(OMAP343X_CLASS, OMAP2_L4_IO_ADDRESS(0x4830A000));
+ omap2_set_globals_sdrc(OMAP2_L3_IO_ADDRESS(OMAP343X_SDRC_BASE),
+ OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE));
+ omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE),
+ NULL);
+ omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE));
+ omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE), NULL);
omap3xxx_check_revision();
omap3xxx_check_features();
- omap_common_init_early();
+ omap3xxx_cm_init();
omap3xxx_voltagedomains_init();
omap3xxx_powerdomains_init();
omap3xxx_clockdomains_init();
@@ -459,10 +479,14 @@
void __init ti81xx_init_early(void)
{
- omap2_set_globals_ti81xx();
+ omap2_set_globals_tap(OMAP343X_CLASS,
+ OMAP2_L4_IO_ADDRESS(TI81XX_TAP_BASE));
+ omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(TI81XX_CTRL_BASE),
+ NULL);
+ omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(TI81XX_PRCM_BASE));
+ omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(TI81XX_PRCM_BASE), NULL);
omap3xxx_check_revision();
ti81xx_check_features();
- omap_common_init_early();
omap3xxx_voltagedomains_init();
omap3xxx_powerdomains_init();
omap3xxx_clockdomains_init();
@@ -517,10 +541,14 @@
#ifdef CONFIG_SOC_AM33XX
void __init am33xx_init_early(void)
{
- omap2_set_globals_am33xx();
+ omap2_set_globals_tap(AM335X_CLASS,
+ AM33XX_L4_WK_IO_ADDRESS(AM33XX_TAP_BASE));
+ omap2_set_globals_control(AM33XX_L4_WK_IO_ADDRESS(AM33XX_CTRL_BASE),
+ NULL);
+ omap2_set_globals_prm(AM33XX_L4_WK_IO_ADDRESS(AM33XX_PRCM_BASE));
+ omap2_set_globals_cm(AM33XX_L4_WK_IO_ADDRESS(AM33XX_PRCM_BASE), NULL);
omap3xxx_check_revision();
ti81xx_check_features();
- omap_common_init_early();
am33xx_voltagedomains_init();
am33xx_powerdomains_init();
am33xx_clockdomains_init();
@@ -533,10 +561,18 @@
#ifdef CONFIG_ARCH_OMAP4
void __init omap4430_init_early(void)
{
- omap2_set_globals_443x();
+ omap2_set_globals_tap(OMAP443X_CLASS,
+ OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE));
+ omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE),
+ OMAP2_L4_IO_ADDRESS(OMAP443X_CTRL_BASE));
+ omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP4430_PRM_BASE));
+ omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP4430_CM_BASE),
+ OMAP2_L4_IO_ADDRESS(OMAP4430_CM2_BASE));
+ omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP4430_PRCM_MPU_BASE));
+ omap_prm_base_init();
+ omap_cm_base_init();
omap4xxx_check_revision();
omap4xxx_check_features();
- omap_common_init_early();
omap44xx_voltagedomains_init();
omap44xx_powerdomains_init();
omap44xx_clockdomains_init();
@@ -556,9 +592,17 @@
#ifdef CONFIG_SOC_OMAP5
void __init omap5_init_early(void)
{
- omap2_set_globals_5xxx();
+ omap2_set_globals_tap(OMAP54XX_CLASS,
+ OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE));
+ omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE),
+ OMAP2_L4_IO_ADDRESS(OMAP54XX_CTRL_BASE));
+ omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRM_BASE));
+ omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP54XX_CM_CORE_AON_BASE),
+ OMAP2_L4_IO_ADDRESS(OMAP54XX_CM_CORE_BASE));
+ omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE));
+ omap_prm_base_init();
+ omap_cm_base_init();
omap5xxx_check_revision();
- omap_common_init_early();
}
#endif
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index 37f8f94..bf49651 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -19,16 +19,17 @@
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/platform_data/asoc-ti-mcbsp.h>
-
-#include <plat/dma.h>
-#include <plat/omap_device.h>
#include <linux/pm_runtime.h>
+#include <plat-omap/dma-omap.h>
+
+#include "omap_device.h"
+
/*
* FIXME: Find a mechanism to enable/disable runtime the McBSP ICLK autoidle.
* Sidetone needs non-gated ICLK and sidetone autoidle is broken.
*/
-#include "cm2xxx_3xxx.h"
+#include "cm3xxx.h"
#include "cm-regbits-34xx.h"
static int omap3_enable_st_clock(unsigned int id, bool enable)
diff --git a/arch/arm/mach-omap2/mmc.h b/arch/arm/mach-omap2/mmc.h
new file mode 100644
index 0000000..0cd4b08
--- /dev/null
+++ b/arch/arm/mach-omap2/mmc.h
@@ -0,0 +1,23 @@
+#include <linux/mmc/host.h>
+#include <linux/platform_data/mmc-omap.h>
+
+#define OMAP24XX_NR_MMC 2
+#define OMAP2420_MMC_SIZE OMAP1_MMC_SIZE
+#define OMAP2_MMC1_BASE 0x4809c000
+
+#define OMAP4_MMC_REG_OFFSET 0x100
+
+#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data);
+#else
+static inline void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data)
+{
+}
+#endif
+
+struct omap_hwmod;
+int omap_msdi_reset(struct omap_hwmod *oh);
+
+/* called from board-specific card detection service routine */
+extern void omap_mmc_notify_cover_event(struct device *dev, int slot,
+ int is_closed);
diff --git a/arch/arm/mach-omap2/msdi.c b/arch/arm/mach-omap2/msdi.c
index 9e57b4a..aafdd4c 100644
--- a/arch/arm/mach-omap2/msdi.c
+++ b/arch/arm/mach-omap2/msdi.c
@@ -25,13 +25,13 @@
#include <linux/err.h>
#include <linux/platform_data/gpio-omap.h>
-#include <plat/omap_hwmod.h>
-#include <plat/omap_device.h>
-#include <plat/mmc.h>
-
+#include "prm.h"
#include "common.h"
#include "control.h"
+#include "omap_hwmod.h"
+#include "omap_device.h"
#include "mux.h"
+#include "mmc.h"
/*
* MSDI_CON_OFFSET: offset in bytes of the MSDI IP block's CON register
@@ -44,9 +44,6 @@
#define MSDI_CON_CLKD_MASK (0x3f << 0)
#define MSDI_CON_CLKD_SHIFT 0
-/* Maximum microseconds to wait for OMAP module to softreset */
-#define MAX_MODULE_SOFTRESET_WAIT 10000
-
/* MSDI_TARGET_RESET_CLKD: clock divisor to use throughout the reset */
#define MSDI_TARGET_RESET_CLKD 0x3ff
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 701e17c..2612634 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -36,8 +36,9 @@
#include <linux/interrupt.h>
-#include <plat/omap_hwmod.h>
+#include "omap_hwmod.h"
+#include "soc.h"
#include "control.h"
#include "mux.h"
#include "prm.h"
diff --git a/arch/arm/mach-omap2/mux34xx.c b/arch/arm/mach-omap2/mux34xx.c
index 17f80e4..c47140b 100644
--- a/arch/arm/mach-omap2/mux34xx.c
+++ b/arch/arm/mach-omap2/mux34xx.c
@@ -614,16 +614,16 @@
"sys_off_mode", NULL, NULL, NULL,
"gpio_9", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(UART1_CTS, 150,
- "uart1_cts", NULL, NULL, NULL,
+ "uart1_cts", "ssi1_rdy_tx", NULL, NULL,
"gpio_150", "hsusb3_tll_clk", NULL, "safe_mode"),
_OMAP3_MUXENTRY(UART1_RTS, 149,
- "uart1_rts", NULL, NULL, NULL,
+ "uart1_rts", "ssi1_flag_tx", NULL, NULL,
"gpio_149", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(UART1_RX, 151,
- "uart1_rx", NULL, "mcbsp1_clkr", "mcspi4_clk",
+ "uart1_rx", "ss1_wake_tx", "mcbsp1_clkr", "mcspi4_clk",
"gpio_151", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(UART1_TX, 148,
- "uart1_tx", NULL, NULL, NULL,
+ "uart1_tx", "ssi1_dat_tx", NULL, NULL,
"gpio_148", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(UART2_CTS, 144,
"uart2_cts", "mcbsp3_dx", "gpt9_pwm_evt", NULL,
diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
index ff4e6a0..3f5fd7e 100644
--- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c
+++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
@@ -50,6 +50,7 @@
#include <asm/suspend.h>
#include <asm/hardware/cache-l2x0.h>
+#include "soc.h"
#include "common.h"
#include "omap44xx.h"
#include "omap4-sar-layout.h"
diff --git a/arch/arm/plat-omap/omap-pm-noop.c b/arch/arm/mach-omap2/omap-pm-noop.c
similarity index 98%
rename from arch/arm/plat-omap/omap-pm-noop.c
rename to arch/arm/mach-omap2/omap-pm-noop.c
index 9722f41..6a3be2b 100644
--- a/arch/arm/plat-omap/omap-pm-noop.c
+++ b/arch/arm/mach-omap2/omap-pm-noop.c
@@ -22,9 +22,8 @@
#include <linux/device.h>
#include <linux/platform_device.h>
-/* Interface documentation is in mach/omap-pm.h */
-#include <plat/omap-pm.h>
-#include <plat/omap_device.h>
+#include "omap_device.h"
+#include "omap-pm.h"
static bool off_mode_enabled;
static int dummy_context_loss_counter;
diff --git a/arch/arm/plat-omap/include/plat/omap-pm.h b/arch/arm/mach-omap2/omap-pm.h
similarity index 100%
rename from arch/arm/plat-omap/include/plat/omap-pm.h
rename to arch/arm/mach-omap2/omap-pm.h
diff --git a/arch/arm/mach-omap2/omap-secure.c b/arch/arm/mach-omap2/omap-secure.c
index e089e4d..b970440 100644
--- a/arch/arm/mach-omap2/omap-secure.c
+++ b/arch/arm/mach-omap2/omap-secure.c
@@ -18,7 +18,6 @@
#include <asm/cacheflush.h>
#include <asm/memblock.h>
-#include <plat/omap-secure.h>
#include "omap-secure.h"
static phys_addr_t omap_secure_memblock_base;
diff --git a/arch/arm/mach-omap2/omap-secure.h b/arch/arm/mach-omap2/omap-secure.h
index c90a435..0e72917 100644
--- a/arch/arm/mach-omap2/omap-secure.h
+++ b/arch/arm/mach-omap2/omap-secure.h
@@ -52,6 +52,13 @@
u32 arg1, u32 arg2, u32 arg3, u32 arg4);
extern u32 omap_smc2(u32 id, u32 falg, u32 pargs);
extern phys_addr_t omap_secure_ram_mempool_base(void);
+extern int omap_secure_ram_reserve_memblock(void);
+#ifdef CONFIG_OMAP4_ERRATA_I688
+extern int omap_barrier_reserve_memblock(void);
+#else
+static inline void omap_barrier_reserve_memblock(void)
+{ }
+#endif
#endif /* __ASSEMBLER__ */
#endif /* OMAP_ARCH_OMAP_SECURE_H */
diff --git a/arch/arm/mach-omap2/omap2-restart.c b/arch/arm/mach-omap2/omap2-restart.c
new file mode 100644
index 0000000..be6bc89
--- /dev/null
+++ b/arch/arm/mach-omap2/omap2-restart.c
@@ -0,0 +1,65 @@
+/*
+ * omap2-restart.c - code common to all OMAP2xxx machines.
+ *
+ * Copyright (C) 2012 Texas Instruments
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include "common.h"
+#include "prm2xxx.h"
+
+/*
+ * reset_virt_prcm_set_ck, reset_sys_ck: pointers to the virt_prcm_set
+ * clock and the sys_ck. Used during the reset process
+ */
+static struct clk *reset_virt_prcm_set_ck, *reset_sys_ck;
+
+/* Reboot handling */
+
+/**
+ * omap2xxx_restart - Set DPLL to bypass mode for reboot to work
+ *
+ * Set the DPLL to bypass so that reboot completes successfully. No
+ * return value.
+ */
+void omap2xxx_restart(char mode, const char *cmd)
+{
+ u32 rate;
+
+ rate = clk_get_rate(reset_sys_ck);
+ clk_set_rate(reset_virt_prcm_set_ck, rate);
+
+ /* XXX Should save the cmd argument for use after the reboot */
+
+ omap2xxx_prm_dpll_reset(); /* never returns */
+ while (1);
+}
+
+/**
+ * omap2xxx_common_look_up_clks_for_reset - look up clocks needed for restart
+ *
+ * Some clocks need to be looked up in advance for the SoC restart
+ * operation to work - see omap2xxx_restart(). Returns -EINVAL upon
+ * error or 0 upon success.
+ */
+static int __init omap2xxx_common_look_up_clks_for_reset(void)
+{
+ reset_virt_prcm_set_ck = clk_get(NULL, "virt_prcm_set");
+ if (IS_ERR(reset_virt_prcm_set_ck))
+ return -EINVAL;
+
+ reset_sys_ck = clk_get(NULL, "sys_ck");
+ if (IS_ERR(reset_sys_ck))
+ return -EINVAL;
+
+ return 0;
+}
+core_initcall(omap2xxx_common_look_up_clks_for_reset);
diff --git a/arch/arm/mach-omap2/omap3-restart.c b/arch/arm/mach-omap2/omap3-restart.c
new file mode 100644
index 0000000..923c582
--- /dev/null
+++ b/arch/arm/mach-omap2/omap3-restart.c
@@ -0,0 +1,36 @@
+/*
+ * omap3-restart.c - Code common to all OMAP3xxx machines.
+ *
+ * Copyright (C) 2009, 2012 Texas Instruments
+ * Copyright (C) 2010 Nokia Corporation
+ * Tony Lindgren <tony@atomide.com>
+ * Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include "iomap.h"
+#include "common.h"
+#include "control.h"
+#include "prm3xxx.h"
+
+/* Global address base setup code */
+
+/**
+ * omap3xxx_restart - trigger a software restart of the SoC
+ * @mode: the "reboot mode", see arch/arm/kernel/{setup,process}.c
+ * @cmd: passed from the userspace program rebooting the system (if provided)
+ *
+ * Resets the SoC. For @cmd, see the 'reboot' syscall in
+ * kernel/sys.c. No return value.
+ */
+void omap3xxx_restart(char mode, const char *cmd)
+{
+ omap3_ctrl_write_boot_mode((cmd ? (u8)*cmd : 0));
+ omap3xxx_prm_dpll3_reset(); /* never returns */
+ while (1);
+}
diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c
index e1f2897..5695885 100644
--- a/arch/arm/mach-omap2/omap4-common.c
+++ b/arch/arm/mach-omap2/omap4-common.c
@@ -25,16 +25,17 @@
#include <asm/mach/map.h>
#include <asm/memblock.h>
-#include <plat/sram.h>
-#include <plat/omap-secure.h>
-#include <plat/mmc.h>
-
#include "omap-wakeupgen.h"
-
#include "soc.h"
+#include "iomap.h"
#include "common.h"
+#include "mmc.h"
#include "hsmmc.h"
+#include "prminst44xx.h"
+#include "prcm_mpu44xx.h"
#include "omap4-sar-layout.h"
+#include "omap-secure.h"
+#include "sram.h"
#ifdef CONFIG_CACHE_L2X0
static void __iomem *l2cache_base;
@@ -281,3 +282,19 @@
return 0;
}
#endif
+
+/**
+ * omap44xx_restart - trigger a software restart of the SoC
+ * @mode: the "reboot mode", see arch/arm/kernel/{setup,process}.c
+ * @cmd: passed from the userspace program rebooting the system (if provided)
+ *
+ * Resets the SoC. For @cmd, see the 'reboot' syscall in
+ * kernel/sys.c. No return value.
+ */
+void omap44xx_restart(char mode, const char *cmd)
+{
+ /* XXX Should save 'cmd' into scratchpad for use after reboot */
+ omap4_prminst_global_warm_sw_reset(); /* never returns */
+ while (1);
+}
+
diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/mach-omap2/omap_device.c
similarity index 99%
rename from arch/arm/plat-omap/omap_device.c
rename to arch/arm/mach-omap2/omap_device.c
index 7a7d1f2a..0ef934f 100644
--- a/arch/arm/plat-omap/omap_device.c
+++ b/arch/arm/mach-omap2/omap_device.c
@@ -89,9 +89,8 @@
#include <linux/of.h>
#include <linux/notifier.h>
-#include <plat/omap_device.h>
-#include <plat/omap_hwmod.h>
-#include <plat/clock.h>
+#include "omap_device.h"
+#include "omap_hwmod.h"
/* These parameters are passed to _omap_device_{de,}activate() */
#define USE_WAKEUP_LAT 0
diff --git a/arch/arm/plat-omap/include/plat/omap_device.h b/arch/arm/mach-omap2/omap_device.h
similarity index 99%
rename from arch/arm/plat-omap/include/plat/omap_device.h
rename to arch/arm/mach-omap2/omap_device.h
index 106f506..0933c59 100644
--- a/arch/arm/plat-omap/include/plat/omap_device.h
+++ b/arch/arm/mach-omap2/omap_device.h
@@ -34,7 +34,7 @@
#include <linux/kernel.h>
#include <linux/platform_device.h>
-#include <plat/omap_hwmod.h>
+#include "omap_hwmod.h"
extern struct dev_pm_domain omap_device_pm_domain;
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index b969ab1..b3b00f4 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -139,27 +139,25 @@
#include <linux/slab.h>
#include <linux/bootmem.h>
-#include <plat/clock.h>
-#include <plat/omap_hwmod.h>
-#include <plat/prcm.h>
+#include "clock.h"
+#include "omap_hwmod.h"
#include "soc.h"
#include "common.h"
#include "clockdomain.h"
#include "powerdomain.h"
-#include "cm2xxx_3xxx.h"
+#include "cm2xxx.h"
+#include "cm3xxx.h"
#include "cminst44xx.h"
#include "cm33xx.h"
-#include "prm2xxx_3xxx.h"
+#include "prm.h"
+#include "prm3xxx.h"
#include "prm44xx.h"
#include "prm33xx.h"
#include "prminst44xx.h"
#include "mux.h"
#include "pm.h"
-/* Maximum microseconds to wait for OMAP module to softreset */
-#define MAX_MODULE_SOFTRESET_WAIT 10000
-
/* Name of the OMAP hwmod for the MPU */
#define MPU_INITIATOR_NAME "mpu"
@@ -422,6 +420,38 @@
}
/**
+ * _wait_softreset_complete - wait for an OCP softreset to complete
+ * @oh: struct omap_hwmod * to wait on
+ *
+ * Wait until the IP block represented by @oh reports that its OCP
+ * softreset is complete. This can be triggered by software (see
+ * _ocp_softreset()) or by hardware upon returning from off-mode (one
+ * example is HSMMC). Waits for up to MAX_MODULE_SOFTRESET_WAIT
+ * microseconds. Returns the number of microseconds waited.
+ */
+static int _wait_softreset_complete(struct omap_hwmod *oh)
+{
+ struct omap_hwmod_class_sysconfig *sysc;
+ u32 softrst_mask;
+ int c = 0;
+
+ sysc = oh->class->sysc;
+
+ if (sysc->sysc_flags & SYSS_HAS_RESET_STATUS)
+ omap_test_timeout((omap_hwmod_read(oh, sysc->syss_offs)
+ & SYSS_RESETDONE_MASK),
+ MAX_MODULE_SOFTRESET_WAIT, c);
+ else if (sysc->sysc_flags & SYSC_HAS_RESET_STATUS) {
+ softrst_mask = (0x1 << sysc->sysc_fields->srst_shift);
+ omap_test_timeout(!(omap_hwmod_read(oh, sysc->sysc_offs)
+ & softrst_mask),
+ MAX_MODULE_SOFTRESET_WAIT, c);
+ }
+
+ return c;
+}
+
+/**
* _set_dmadisable: set OCP_SYSCONFIG.DMADISABLE bit in @v
* @oh: struct omap_hwmod *
*
@@ -1282,6 +1312,18 @@
if (!oh->class->sysc)
return;
+ /*
+ * Wait until reset has completed, this is needed as the IP
+ * block is reset automatically by hardware in some cases
+ * (off-mode for example), and the drivers require the
+ * IP to be ready when they access it
+ */
+ if (oh->flags & HWMOD_CONTROL_OPT_CLKS_IN_RESET)
+ _enable_optional_clocks(oh);
+ _wait_softreset_complete(oh);
+ if (oh->flags & HWMOD_CONTROL_OPT_CLKS_IN_RESET)
+ _disable_optional_clocks(oh);
+
v = oh->_sysc_cache;
sf = oh->class->sysc->sysc_flags;
@@ -1804,7 +1846,7 @@
*/
static int _ocp_softreset(struct omap_hwmod *oh)
{
- u32 v, softrst_mask;
+ u32 v;
int c = 0;
int ret = 0;
@@ -1834,19 +1876,7 @@
if (oh->class->sysc->srst_udelay)
udelay(oh->class->sysc->srst_udelay);
- if (oh->class->sysc->sysc_flags & SYSS_HAS_RESET_STATUS)
- omap_test_timeout((omap_hwmod_read(oh,
- oh->class->sysc->syss_offs)
- & SYSS_RESETDONE_MASK),
- MAX_MODULE_SOFTRESET_WAIT, c);
- else if (oh->class->sysc->sysc_flags & SYSC_HAS_RESET_STATUS) {
- softrst_mask = (0x1 << oh->class->sysc->sysc_fields->srst_shift);
- omap_test_timeout(!(omap_hwmod_read(oh,
- oh->class->sysc->sysc_offs)
- & softrst_mask),
- MAX_MODULE_SOFTRESET_WAIT, c);
- }
-
+ c = _wait_softreset_complete(oh);
if (c == MAX_MODULE_SOFTRESET_WAIT)
pr_warning("omap_hwmod: %s: softreset failed (waited %d usec)\n",
oh->name, MAX_MODULE_SOFTRESET_WAIT);
@@ -2063,7 +2093,8 @@
_enable_sysc(oh);
}
} else {
- _omap4_disable_module(oh);
+ if (soc_ops.disable_module)
+ soc_ops.disable_module(oh);
_disable_clocks(oh);
pr_debug("omap_hwmod: %s: _wait_target_ready: %d\n",
oh->name, r);
@@ -2352,6 +2383,9 @@
if (oh->_state != _HWMOD_STATE_INITIALIZED)
return -EINVAL;
+ if (oh->flags & HWMOD_EXT_OPT_MAIN_CLK)
+ return -EPERM;
+
if (oh->rst_lines_cnt == 0) {
r = _enable(oh);
if (r) {
@@ -2668,7 +2702,7 @@
/* Static functions intended only for use in soc_ops field function pointers */
/**
- * _omap2_wait_target_ready - wait for a module to leave slave idle
+ * _omap2xxx_wait_target_ready - wait for a module to leave slave idle
* @oh: struct omap_hwmod *
*
* Wait for a module @oh to leave slave idle. Returns 0 if the module
@@ -2676,7 +2710,7 @@
* slave idle; otherwise, pass along the return value of the
* appropriate *_cm*_wait_module_ready() function.
*/
-static int _omap2_wait_target_ready(struct omap_hwmod *oh)
+static int _omap2xxx_wait_target_ready(struct omap_hwmod *oh)
{
if (!oh)
return -EINVAL;
@@ -2689,9 +2723,36 @@
/* XXX check module SIDLEMODE, hardreset status, enabled clocks */
- return omap2_cm_wait_module_ready(oh->prcm.omap2.module_offs,
- oh->prcm.omap2.idlest_reg_id,
- oh->prcm.omap2.idlest_idle_bit);
+ return omap2xxx_cm_wait_module_ready(oh->prcm.omap2.module_offs,
+ oh->prcm.omap2.idlest_reg_id,
+ oh->prcm.omap2.idlest_idle_bit);
+}
+
+/**
+ * _omap3xxx_wait_target_ready - wait for a module to leave slave idle
+ * @oh: struct omap_hwmod *
+ *
+ * Wait for a module @oh to leave slave idle. Returns 0 if the module
+ * does not have an IDLEST bit or if the module successfully leaves
+ * slave idle; otherwise, pass along the return value of the
+ * appropriate *_cm*_wait_module_ready() function.
+ */
+static int _omap3xxx_wait_target_ready(struct omap_hwmod *oh)
+{
+ if (!oh)
+ return -EINVAL;
+
+ if (oh->flags & HWMOD_NO_IDLEST)
+ return 0;
+
+ if (!_find_mpu_rt_port(oh))
+ return 0;
+
+ /* XXX check module SIDLEMODE, hardreset status, enabled clocks */
+
+ return omap3xxx_cm_wait_module_ready(oh->prcm.omap2.module_offs,
+ oh->prcm.omap2.idlest_reg_id,
+ oh->prcm.omap2.idlest_idle_bit);
}
/**
@@ -3959,8 +4020,13 @@
*/
void __init omap_hwmod_init(void)
{
- if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
- soc_ops.wait_target_ready = _omap2_wait_target_ready;
+ if (cpu_is_omap24xx()) {
+ soc_ops.wait_target_ready = _omap2xxx_wait_target_ready;
+ soc_ops.assert_hardreset = _omap2_assert_hardreset;
+ soc_ops.deassert_hardreset = _omap2_deassert_hardreset;
+ soc_ops.is_hardreset_asserted = _omap2_is_hardreset_asserted;
+ } else if (cpu_is_omap34xx()) {
+ soc_ops.wait_target_ready = _omap3xxx_wait_target_ready;
soc_ops.assert_hardreset = _omap2_assert_hardreset;
soc_ops.deassert_hardreset = _omap2_deassert_hardreset;
soc_ops.is_hardreset_asserted = _omap2_is_hardreset_asserted;
diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h
similarity index 98%
rename from arch/arm/plat-omap/include/plat/omap_hwmod.h
rename to arch/arm/mach-omap2/omap_hwmod.h
index b3349f7..87a3c5b 100644
--- a/arch/arm/plat-omap/include/plat/omap_hwmod.h
+++ b/arch/arm/mach-omap2/omap_hwmod.h
@@ -35,7 +35,6 @@
#include <linux/list.h>
#include <linux/ioport.h>
#include <linux/spinlock.h>
-#include <plat/cpu.h>
struct omap_device;
@@ -443,6 +442,11 @@
* in order to complete the reset. Optional clocks will be disabled
* again after the reset.
* HWMOD_16BIT_REG: Module has 16bit registers
+ * HWMOD_EXT_OPT_MAIN_CLK: The only main functional clock source for
+ * this IP block comes from an off-chip source and is not always
+ * enabled. This prevents the hwmod code from being able to
+ * enable and reset the IP block early. XXX Eventually it should
+ * be possible to query the clock framework for this information.
*/
#define HWMOD_SWSUP_SIDLE (1 << 0)
#define HWMOD_SWSUP_MSTANDBY (1 << 1)
@@ -453,6 +457,7 @@
#define HWMOD_NO_IDLEST (1 << 6)
#define HWMOD_CONTROL_OPT_CLKS_IN_RESET (1 << 7)
#define HWMOD_16BIT_REG (1 << 8)
+#define HWMOD_EXT_OPT_MAIN_CLK (1 << 9)
/*
* omap_hwmod._int_flags definitions
diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
index b5db600..a8b3368 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
@@ -12,21 +12,24 @@
* XXX handle crossbar/shared link difference for L3?
* XXX these should be marked initdata for multi-OMAP kernels
*/
+
+#include <linux/i2c-omap.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
-#include <plat/omap_hwmod.h>
-#include <plat/dma.h>
-#include <plat/serial.h>
-#include <plat/i2c.h>
+#include <plat-omap/dma-omap.h>
#include <plat/dmtimer.h>
+
+#include "omap_hwmod.h"
#include "l3_2xxx.h"
#include "l4_2xxx.h"
-#include <plat/mmc.h>
#include "omap_hwmod_common_data.h"
#include "cm-regbits-24xx.h"
#include "prm-regbits-24xx.h"
+#include "i2c.h"
+#include "mmc.h"
+#include "serial.h"
#include "wd_timer.h"
/*
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
index c455e41..dc768c5 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
@@ -12,21 +12,23 @@
* XXX handle crossbar/shared link difference for L3?
* XXX these should be marked initdata for multi-OMAP kernels
*/
+
+#include <linux/i2c-omap.h>
#include <linux/platform_data/asoc-ti-mcbsp.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
-#include <plat/omap_hwmod.h>
-#include <plat/dma.h>
-#include <plat/serial.h>
-#include <plat/i2c.h>
+#include <plat-omap/dma-omap.h>
#include <plat/dmtimer.h>
-#include <plat/mmc.h>
+
+#include "omap_hwmod.h"
+#include "mmc.h"
#include "l3_2xxx.h"
#include "soc.h"
#include "omap_hwmod_common_data.h"
#include "prm-regbits-24xx.h"
#include "cm-regbits-24xx.h"
+#include "i2c.h"
#include "wd_timer.h"
/*
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c
index cbb4ef6..0413dab 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c
@@ -13,8 +13,7 @@
*/
#include <asm/sizes.h>
-#include <plat/omap_hwmod.h>
-#include <plat/serial.h>
+#include "omap_hwmod.h"
#include "omap_hwmod_common_data.h"
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
index 8851bbb..40d6c93 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
@@ -9,13 +9,14 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-#include <plat/omap_hwmod.h>
-#include <plat/serial.h>
-#include <plat/dma.h>
-#include <plat/common.h>
+
+#include <plat-omap/dma-omap.h>
+
+#include "omap_hwmod.h"
#include "hdq1w.h"
#include "omap_hwmod_common_data.h"
+#include "dma.h"
/* UART */
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c
index 1a1287d..47901a5 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c
@@ -13,10 +13,10 @@
*/
#include <asm/sizes.h>
-#include <plat/omap_hwmod.h>
-#include <plat/serial.h>
+#include "omap_hwmod.h"
#include "l3_2xxx.h"
#include "l4_2xxx.h"
+#include "serial.h"
#include "omap_hwmod_common_data.h"
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
index bd9220e..a0116d0 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
@@ -8,13 +8,13 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-#include <plat/omap_hwmod.h>
-#include <plat/serial.h>
+
#include <linux/platform_data/gpio-omap.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
#include <plat/dmtimer.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
+#include "omap_hwmod.h"
#include "omap_hwmod_common_data.h"
#include "cm-regbits-24xx.h"
#include "prm-regbits-24xx.h"
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
index 59d5c1c..ad8d43b 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
@@ -14,13 +14,11 @@
* GNU General Public License for more details.
*/
-#include <plat/omap_hwmod.h>
-#include <plat/cpu.h>
+#include <linux/i2c-omap.h>
+
+#include "omap_hwmod.h"
#include <linux/platform_data/gpio-omap.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
-#include <plat/dma.h>
-#include <plat/mmc.h>
-#include <plat/i2c.h>
#include "omap_hwmod_common_data.h"
@@ -28,6 +26,8 @@
#include "cm33xx.h"
#include "prm33xx.h"
#include "prm-regbits-33xx.h"
+#include "i2c.h"
+#include "mmc.h"
/*
* IP blocks
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index f67b7ee..abe66ce 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -14,16 +14,14 @@
*
* XXX these should be marked initdata for multi-OMAP kernels
*/
+
+#include <linux/i2c-omap.h>
#include <linux/power/smartreflex.h>
#include <linux/platform_data/gpio-omap.h>
-#include <plat/omap_hwmod.h>
-#include <plat/dma.h>
-#include <plat/serial.h>
+#include <plat-omap/dma-omap.h>
#include "l3_3xxx.h"
#include "l4_3xxx.h"
-#include <plat/i2c.h>
-#include <plat/mmc.h>
#include <linux/platform_data/asoc-ti-mcbsp.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
#include <plat/dmtimer.h>
@@ -32,10 +30,16 @@
#include "am35xx.h"
#include "soc.h"
+#include "omap_hwmod.h"
#include "omap_hwmod_common_data.h"
#include "prm-regbits-34xx.h"
#include "cm-regbits-34xx.h"
+
+#include "dma.h"
+#include "i2c.h"
+#include "mmc.h"
#include "wd_timer.h"
+#include "serial.h"
/*
* OMAP3xxx hardware module integration data
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 652d028..b80bbf6 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -21,22 +21,24 @@
#include <linux/io.h>
#include <linux/platform_data/gpio-omap.h>
#include <linux/power/smartreflex.h>
+#include <linux/i2c-omap.h>
-#include <plat/omap_hwmod.h>
-#include <plat/i2c.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
+
+#include <linux/platform_data/omap_ocp2scp.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
#include <linux/platform_data/asoc-ti-mcbsp.h>
-#include <plat/mmc.h>
#include <plat/dmtimer.h>
-#include <plat/common.h>
#include <plat/iommu.h>
+#include "omap_hwmod.h"
#include "omap_hwmod_common_data.h"
#include "cm1_44xx.h"
#include "cm2_44xx.h"
#include "prm44xx.h"
#include "prm-regbits-44xx.h"
+#include "i2c.h"
+#include "mmc.h"
#include "wd_timer.h"
/* Base offset for all OMAP4 interrupts external to MPUSS */
@@ -2125,6 +2127,14 @@
.name = "mcpdm",
.class = &omap44xx_mcpdm_hwmod_class,
.clkdm_name = "abe_clkdm",
+ /*
+ * It's suspected that the McPDM requires an off-chip main
+ * functional clock, controlled via I2C. This IP block is
+ * currently reset very early during boot, before I2C is
+ * available, so it doesn't seem that we have any choice in
+ * the kernel other than to avoid resetting it.
+ */
+ .flags = HWMOD_EXT_OPT_MAIN_CLK,
.mpu_irqs = omap44xx_mcpdm_irqs,
.sdma_reqs = omap44xx_mcpdm_sdma_reqs,
.main_clk = "mcpdm_fck",
@@ -2681,6 +2691,32 @@
.sysc = &omap44xx_ocp2scp_sysc,
};
+/* ocp2scp dev_attr */
+static struct resource omap44xx_usb_phy_and_pll_addrs[] = {
+ {
+ .name = "usb_phy",
+ .start = 0x4a0ad080,
+ .end = 0x4a0ae000,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ /* XXX: Remove this once control module driver is in place */
+ .name = "ctrl_dev",
+ .start = 0x4a002300,
+ .end = 0x4a002303,
+ .flags = IORESOURCE_MEM,
+ },
+ { }
+};
+
+static struct omap_ocp2scp_dev ocp2scp_dev_attr[] = {
+ {
+ .drv_name = "omap-usb2",
+ .res = omap44xx_usb_phy_and_pll_addrs,
+ },
+ { }
+};
+
/* ocp2scp_usb_phy */
static struct omap_hwmod omap44xx_ocp2scp_usb_phy_hwmod = {
.name = "ocp2scp_usb_phy",
@@ -2694,6 +2730,7 @@
.modulemode = MODULEMODE_HWCTRL,
},
},
+ .dev_attr = ocp2scp_dev_attr,
};
/*
diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.c b/arch/arm/mach-omap2/omap_hwmod_common_data.c
index 9f1ccdc..79d623b 100644
--- a/arch/arm/mach-omap2/omap_hwmod_common_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_common_data.c
@@ -16,7 +16,7 @@
* data and their integration with other OMAP modules and Linux.
*/
-#include <plat/omap_hwmod.h>
+#include "omap_hwmod.h"
#include "omap_hwmod_common_data.h"
diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.h b/arch/arm/mach-omap2/omap_hwmod_common_data.h
index 2bc8f17..cfcce29 100644
--- a/arch/arm/mach-omap2/omap_hwmod_common_data.h
+++ b/arch/arm/mach-omap2/omap_hwmod_common_data.h
@@ -13,7 +13,7 @@
#ifndef __ARCH_ARM_MACH_OMAP2_OMAP_HWMOD_COMMON_DATA_H
#define __ARCH_ARM_MACH_OMAP2_OMAP_HWMOD_COMMON_DATA_H
-#include <plat/omap_hwmod.h>
+#include "omap_hwmod.h"
#include "common.h"
#include "display.h"
diff --git a/arch/arm/mach-omap2/omap_opp_data.h b/arch/arm/mach-omap2/omap_opp_data.h
index c784c12..7e437bf 100644
--- a/arch/arm/mach-omap2/omap_opp_data.h
+++ b/arch/arm/mach-omap2/omap_opp_data.h
@@ -19,7 +19,7 @@
#ifndef __ARCH_ARM_MACH_OMAP2_OMAP_OPP_DATA_H
#define __ARCH_ARM_MACH_OMAP2_OMAP_OPP_DATA_H
-#include <plat/omap_hwmod.h>
+#include "omap_hwmod.h"
#include "voltage.h"
diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c
index d992db8f..4d76a3c 100644
--- a/arch/arm/mach-omap2/omap_phy_internal.c
+++ b/arch/arm/mach-omap2/omap_phy_internal.c
@@ -27,11 +27,11 @@
#include <linux/io.h>
#include <linux/err.h>
#include <linux/usb.h>
-
-#include <plat/usb.h>
+#include <linux/usb/musb.h>
#include "soc.h"
#include "control.h"
+#include "usb.h"
void am35x_musb_reset(void)
{
diff --git a/arch/arm/mach-omap2/omap_twl.c b/arch/arm/mach-omap2/omap_twl.c
index f515a1a..2bf35dc 100644
--- a/arch/arm/mach-omap2/omap_twl.c
+++ b/arch/arm/mach-omap2/omap_twl.c
@@ -18,6 +18,7 @@
#include <linux/kernel.h>
#include <linux/i2c/twl.h>
+#include "soc.h"
#include "voltage.h"
#include "pm.h"
diff --git a/arch/arm/mach-omap2/opp.c b/arch/arm/mach-omap2/opp.c
index 58e16ae..bd41d59 100644
--- a/arch/arm/mach-omap2/opp.c
+++ b/arch/arm/mach-omap2/opp.c
@@ -20,7 +20,7 @@
#include <linux/opp.h>
#include <linux/cpu.h>
-#include <plat/omap_device.h>
+#include "omap_device.h"
#include "omap_opp_data.h"
diff --git a/arch/arm/mach-omap2/opp3xxx_data.c b/arch/arm/mach-omap2/opp3xxx_data.c
index 75cef5f..62772e0 100644
--- a/arch/arm/mach-omap2/opp3xxx_data.c
+++ b/arch/arm/mach-omap2/opp3xxx_data.c
@@ -19,6 +19,7 @@
*/
#include <linux/module.h>
+#include "soc.h"
#include "control.h"
#include "omap_opp_data.h"
#include "pm.h"
diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c
index 46092cd..3cf4fdfd 100644
--- a/arch/arm/mach-omap2/pm-debug.c
+++ b/arch/arm/mach-omap2/pm-debug.c
@@ -27,12 +27,13 @@
#include <linux/module.h>
#include <linux/slab.h>
-#include <plat/clock.h>
+#include "clock.h"
#include "powerdomain.h"
#include "clockdomain.h"
#include <plat/dmtimer.h>
-#include <plat/omap-pm.h>
+#include "omap-pm.h"
+#include "soc.h"
#include "cm2xxx_3xxx.h"
#include "prm2xxx_3xxx.h"
#include "pm.h"
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index ea61c329..331478f 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -20,10 +20,11 @@
#include <asm/system_misc.h>
-#include <plat/omap-pm.h>
-#include <plat/omap_device.h>
+#include "omap-pm.h"
+#include "omap_device.h"
#include "common.h"
+#include "soc.h"
#include "prcm-common.h"
#include "voltage.h"
#include "powerdomain.h"
diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
index 686137d..67d6613 100644
--- a/arch/arm/mach-omap2/pm.h
+++ b/arch/arm/mach-omap2/pm.h
@@ -91,6 +91,7 @@
#define PM_RTA_ERRATUM_i608 (1 << 0)
#define PM_SDRC_WAKEUP_ERRATUM_i583 (1 << 1)
+#define PM_PER_MEMORIES_ERRATUM_i582 (1 << 2)
#if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3)
extern u16 pm34xx_errata;
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index 8af6cd6..13e1f43 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -31,21 +31,24 @@
#include <linux/gpio.h>
#include <linux/platform_data/gpio-omap.h>
+#include <asm/fncpy.h>
+
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
#include <asm/mach-types.h>
#include <asm/system_misc.h>
-#include <plat/clock.h>
-#include <plat/sram.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
+#include "soc.h"
#include "common.h"
-#include "prm2xxx_3xxx.h"
+#include "clock.h"
+#include "prm2xxx.h"
#include "prm-regbits-24xx.h"
-#include "cm2xxx_3xxx.h"
+#include "cm2xxx.h"
#include "cm-regbits-24xx.h"
#include "sdrc.h"
+#include "sram.h"
#include "pm.h"
#include "control.h"
#include "powerdomain.h"
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index ba670db..7703200 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -32,25 +32,24 @@
#include <trace/events/power.h>
+#include <asm/fncpy.h>
#include <asm/suspend.h>
#include <asm/system_misc.h>
-#include <plat/sram.h>
#include "clockdomain.h"
#include "powerdomain.h"
-#include <plat/sdrc.h>
-#include <plat/prcm.h>
-#include <plat/gpmc.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
+#include "soc.h"
#include "common.h"
-#include "cm2xxx_3xxx.h"
+#include "cm3xxx.h"
#include "cm-regbits-34xx.h"
+#include "gpmc.h"
#include "prm-regbits-34xx.h"
-
-#include "prm2xxx_3xxx.h"
+#include "prm3xxx.h"
#include "pm.h"
#include "sdrc.h"
+#include "sram.h"
#include "control.h"
/* pm34xx errata defined in pm.h */
@@ -652,14 +651,17 @@
/* Enable the l2 cache toggling in sleep logic */
enable_omap3630_toggle_l2_on_restore();
if (omap_rev() < OMAP3630_REV_ES1_2)
- pm34xx_errata |= PM_SDRC_WAKEUP_ERRATUM_i583;
+ pm34xx_errata |= (PM_SDRC_WAKEUP_ERRATUM_i583 |
+ PM_PER_MEMORIES_ERRATUM_i582);
+ } else if (cpu_is_omap34xx()) {
+ pm34xx_errata |= PM_PER_MEMORIES_ERRATUM_i582;
}
}
int __init omap3_pm_init(void)
{
struct power_state *pwrst, *tmp;
- struct clockdomain *neon_clkdm, *mpu_clkdm;
+ struct clockdomain *neon_clkdm, *mpu_clkdm, *per_clkdm, *wkup_clkdm;
int ret;
if (!omap3_has_io_chain_ctrl())
@@ -711,6 +713,8 @@
neon_clkdm = clkdm_lookup("neon_clkdm");
mpu_clkdm = clkdm_lookup("mpu_clkdm");
+ per_clkdm = clkdm_lookup("per_clkdm");
+ wkup_clkdm = clkdm_lookup("wkup_clkdm");
#ifdef CONFIG_SUSPEND
omap_pm_suspend = omap3_pm_suspend;
@@ -727,6 +731,27 @@
if (IS_PM34XX_ERRATUM(PM_RTA_ERRATUM_i608))
omap3630_ctrl_disable_rta();
+ /*
+ * The UART3/4 FIFO and the sidetone memory in McBSP2/3 are
+ * not correctly reset when the PER powerdomain comes back
+ * from OFF or OSWR when the CORE powerdomain is kept active.
+ * See OMAP36xx Erratum i582 "PER Domain reset issue after
+ * Domain-OFF/OSWR Wakeup". This wakeup dependency is not a
+ * complete workaround. The kernel must also prevent the PER
+ * powerdomain from going to OSWR/OFF while the CORE
+ * powerdomain is not going to OSWR/OFF. And if PER last
+ * power state was off while CORE last power state was ON, the
+ * UART3/4 and McBSP2/3 SIDETONE devices need to run a
+ * self-test using their loopback tests; if that fails, those
+ * devices are unusable until the PER/CORE can complete a transition
+ * from ON to OSWR/OFF and then back to ON.
+ *
+ * XXX Technically this workaround is only needed if off-mode
+ * or OSWR is enabled.
+ */
+ if (IS_PM34XX_ERRATUM(PM_PER_MEMORIES_ERRATUM_i582))
+ clkdm_add_wkdep(per_clkdm, wkup_clkdm);
+
clkdm_add_wkdep(neon_clkdm, mpu_clkdm);
if (omap_type() != OMAP2_DEVICE_TYPE_GP) {
omap3_secure_ram_storage =
diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c
index 04922d1..7da75ae 100644
--- a/arch/arm/mach-omap2/pm44xx.c
+++ b/arch/arm/mach-omap2/pm44xx.c
@@ -18,6 +18,7 @@
#include <linux/slab.h>
#include <asm/system_misc.h>
+#include "soc.h"
#include "common.h"
#include "clockdomain.h"
#include "powerdomain.h"
diff --git a/arch/arm/mach-omap2/pmu.c b/arch/arm/mach-omap2/pmu.c
index 2a79176..3cf79b5 100644
--- a/arch/arm/mach-omap2/pmu.c
+++ b/arch/arm/mach-omap2/pmu.c
@@ -15,8 +15,9 @@
#include <asm/pmu.h>
-#include <plat/omap_hwmod.h>
-#include <plat/omap_device.h>
+#include "soc.h"
+#include "omap_hwmod.h"
+#include "omap_device.h"
static char *omap2_pmu_oh_names[] = {"mpu"};
static char *omap3_pmu_oh_names[] = {"mpu", "debugss"};
diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c
index 1678a32..dea62a9 100644
--- a/arch/arm/mach-omap2/powerdomain.c
+++ b/arch/arm/mach-omap2/powerdomain.c
@@ -29,8 +29,6 @@
#include <asm/cpu.h>
-#include <plat/prcm.h>
-
#include "powerdomain.h"
#include "clockdomain.h"
diff --git a/arch/arm/mach-omap2/powerdomain.h b/arch/arm/mach-omap2/powerdomain.h
index baee906..5277d56eb 100644
--- a/arch/arm/mach-omap2/powerdomain.h
+++ b/arch/arm/mach-omap2/powerdomain.h
@@ -22,8 +22,6 @@
#include <linux/atomic.h>
-#include <plat/cpu.h>
-
#include "voltage.h"
/* Powerdomain basic power states */
diff --git a/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c b/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c
deleted file mode 100644
index 3950ccf..0000000
--- a/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c
+++ /dev/null
@@ -1,242 +0,0 @@
-/*
- * OMAP2 and OMAP3 powerdomain control
- *
- * Copyright (C) 2009-2011 Texas Instruments, Inc.
- * Copyright (C) 2007-2009 Nokia Corporation
- *
- * Derived from mach-omap2/powerdomain.c written by Paul Walmsley
- * Rajendra Nayak <rnayak@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/io.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-#include <linux/bug.h>
-
-#include <plat/prcm.h>
-
-#include "powerdomain.h"
-#include "prm.h"
-#include "prm-regbits-24xx.h"
-#include "prm-regbits-34xx.h"
-
-
-/* Common functions across OMAP2 and OMAP3 */
-static int omap2_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
-{
- omap2_prm_rmw_mod_reg_bits(OMAP_POWERSTATE_MASK,
- (pwrst << OMAP_POWERSTATE_SHIFT),
- pwrdm->prcm_offs, OMAP2_PM_PWSTCTRL);
- return 0;
-}
-
-static int omap2_pwrdm_read_next_pwrst(struct powerdomain *pwrdm)
-{
- return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
- OMAP2_PM_PWSTCTRL,
- OMAP_POWERSTATE_MASK);
-}
-
-static int omap2_pwrdm_read_pwrst(struct powerdomain *pwrdm)
-{
- return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
- OMAP2_PM_PWSTST,
- OMAP_POWERSTATEST_MASK);
-}
-
-static int omap2_pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank,
- u8 pwrst)
-{
- u32 m;
-
- m = omap2_pwrdm_get_mem_bank_onstate_mask(bank);
-
- omap2_prm_rmw_mod_reg_bits(m, (pwrst << __ffs(m)), pwrdm->prcm_offs,
- OMAP2_PM_PWSTCTRL);
-
- return 0;
-}
-
-static int omap2_pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank,
- u8 pwrst)
-{
- u32 m;
-
- m = omap2_pwrdm_get_mem_bank_retst_mask(bank);
-
- omap2_prm_rmw_mod_reg_bits(m, (pwrst << __ffs(m)), pwrdm->prcm_offs,
- OMAP2_PM_PWSTCTRL);
-
- return 0;
-}
-
-static int omap2_pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
-{
- u32 m;
-
- m = omap2_pwrdm_get_mem_bank_stst_mask(bank);
-
- return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs, OMAP2_PM_PWSTST,
- m);
-}
-
-static int omap2_pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank)
-{
- u32 m;
-
- m = omap2_pwrdm_get_mem_bank_retst_mask(bank);
-
- return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
- OMAP2_PM_PWSTCTRL, m);
-}
-
-static int omap2_pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst)
-{
- u32 v;
-
- v = pwrst << __ffs(OMAP3430_LOGICL1CACHERETSTATE_MASK);
- omap2_prm_rmw_mod_reg_bits(OMAP3430_LOGICL1CACHERETSTATE_MASK, v,
- pwrdm->prcm_offs, OMAP2_PM_PWSTCTRL);
-
- return 0;
-}
-
-static int omap2_pwrdm_wait_transition(struct powerdomain *pwrdm)
-{
- u32 c = 0;
-
- /*
- * REVISIT: pwrdm_wait_transition() may be better implemented
- * via a callback and a periodic timer check -- how long do we expect
- * powerdomain transitions to take?
- */
-
- /* XXX Is this udelay() value meaningful? */
- while ((omap2_prm_read_mod_reg(pwrdm->prcm_offs, OMAP2_PM_PWSTST) &
- OMAP_INTRANSITION_MASK) &&
- (c++ < PWRDM_TRANSITION_BAILOUT))
- udelay(1);
-
- if (c > PWRDM_TRANSITION_BAILOUT) {
- pr_err("powerdomain: %s: waited too long to complete transition\n",
- pwrdm->name);
- return -EAGAIN;
- }
-
- pr_debug("powerdomain: completed transition in %d loops\n", c);
-
- return 0;
-}
-
-/* Applicable only for OMAP3. Not supported on OMAP2 */
-static int omap3_pwrdm_read_prev_pwrst(struct powerdomain *pwrdm)
-{
- return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
- OMAP3430_PM_PREPWSTST,
- OMAP3430_LASTPOWERSTATEENTERED_MASK);
-}
-
-static int omap3_pwrdm_read_logic_pwrst(struct powerdomain *pwrdm)
-{
- return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
- OMAP2_PM_PWSTST,
- OMAP3430_LOGICSTATEST_MASK);
-}
-
-static int omap3_pwrdm_read_logic_retst(struct powerdomain *pwrdm)
-{
- return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
- OMAP2_PM_PWSTCTRL,
- OMAP3430_LOGICSTATEST_MASK);
-}
-
-static int omap3_pwrdm_read_prev_logic_pwrst(struct powerdomain *pwrdm)
-{
- return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
- OMAP3430_PM_PREPWSTST,
- OMAP3430_LASTLOGICSTATEENTERED_MASK);
-}
-
-static int omap3_get_mem_bank_lastmemst_mask(u8 bank)
-{
- switch (bank) {
- case 0:
- return OMAP3430_LASTMEM1STATEENTERED_MASK;
- case 1:
- return OMAP3430_LASTMEM2STATEENTERED_MASK;
- case 2:
- return OMAP3430_LASTSHAREDL2CACHEFLATSTATEENTERED_MASK;
- case 3:
- return OMAP3430_LASTL2FLATMEMSTATEENTERED_MASK;
- default:
- WARN_ON(1); /* should never happen */
- return -EEXIST;
- }
- return 0;
-}
-
-static int omap3_pwrdm_read_prev_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
-{
- u32 m;
-
- m = omap3_get_mem_bank_lastmemst_mask(bank);
-
- return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
- OMAP3430_PM_PREPWSTST, m);
-}
-
-static int omap3_pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm)
-{
- omap2_prm_write_mod_reg(0, pwrdm->prcm_offs, OMAP3430_PM_PREPWSTST);
- return 0;
-}
-
-static int omap3_pwrdm_enable_hdwr_sar(struct powerdomain *pwrdm)
-{
- return omap2_prm_rmw_mod_reg_bits(0,
- 1 << OMAP3430ES2_SAVEANDRESTORE_SHIFT,
- pwrdm->prcm_offs, OMAP2_PM_PWSTCTRL);
-}
-
-static int omap3_pwrdm_disable_hdwr_sar(struct powerdomain *pwrdm)
-{
- return omap2_prm_rmw_mod_reg_bits(1 << OMAP3430ES2_SAVEANDRESTORE_SHIFT,
- 0, pwrdm->prcm_offs,
- OMAP2_PM_PWSTCTRL);
-}
-
-struct pwrdm_ops omap2_pwrdm_operations = {
- .pwrdm_set_next_pwrst = omap2_pwrdm_set_next_pwrst,
- .pwrdm_read_next_pwrst = omap2_pwrdm_read_next_pwrst,
- .pwrdm_read_pwrst = omap2_pwrdm_read_pwrst,
- .pwrdm_set_logic_retst = omap2_pwrdm_set_logic_retst,
- .pwrdm_set_mem_onst = omap2_pwrdm_set_mem_onst,
- .pwrdm_set_mem_retst = omap2_pwrdm_set_mem_retst,
- .pwrdm_read_mem_pwrst = omap2_pwrdm_read_mem_pwrst,
- .pwrdm_read_mem_retst = omap2_pwrdm_read_mem_retst,
- .pwrdm_wait_transition = omap2_pwrdm_wait_transition,
-};
-
-struct pwrdm_ops omap3_pwrdm_operations = {
- .pwrdm_set_next_pwrst = omap2_pwrdm_set_next_pwrst,
- .pwrdm_read_next_pwrst = omap2_pwrdm_read_next_pwrst,
- .pwrdm_read_pwrst = omap2_pwrdm_read_pwrst,
- .pwrdm_read_prev_pwrst = omap3_pwrdm_read_prev_pwrst,
- .pwrdm_set_logic_retst = omap2_pwrdm_set_logic_retst,
- .pwrdm_read_logic_pwrst = omap3_pwrdm_read_logic_pwrst,
- .pwrdm_read_logic_retst = omap3_pwrdm_read_logic_retst,
- .pwrdm_read_prev_logic_pwrst = omap3_pwrdm_read_prev_logic_pwrst,
- .pwrdm_set_mem_onst = omap2_pwrdm_set_mem_onst,
- .pwrdm_set_mem_retst = omap2_pwrdm_set_mem_retst,
- .pwrdm_read_mem_pwrst = omap2_pwrdm_read_mem_pwrst,
- .pwrdm_read_mem_retst = omap2_pwrdm_read_mem_retst,
- .pwrdm_read_prev_mem_pwrst = omap3_pwrdm_read_prev_mem_pwrst,
- .pwrdm_clear_all_prev_pwrst = omap3_pwrdm_clear_all_prev_pwrst,
- .pwrdm_enable_hdwr_sar = omap3_pwrdm_enable_hdwr_sar,
- .pwrdm_disable_hdwr_sar = omap3_pwrdm_disable_hdwr_sar,
- .pwrdm_wait_transition = omap2_pwrdm_wait_transition,
-};
diff --git a/arch/arm/mach-omap2/powerdomain33xx.c b/arch/arm/mach-omap2/powerdomain33xx.c
deleted file mode 100644
index 67c5663..0000000
--- a/arch/arm/mach-omap2/powerdomain33xx.c
+++ /dev/null
@@ -1,229 +0,0 @@
-/*
- * AM33XX Powerdomain control
- *
- * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * Derived from mach-omap2/powerdomain44xx.c written by Rajendra Nayak
- * <rnayak@ti.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/io.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-
-#include <plat/prcm.h>
-
-#include "powerdomain.h"
-#include "prm33xx.h"
-#include "prm-regbits-33xx.h"
-
-
-static int am33xx_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
-{
- am33xx_prm_rmw_reg_bits(OMAP_POWERSTATE_MASK,
- (pwrst << OMAP_POWERSTATE_SHIFT),
- pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
- return 0;
-}
-
-static int am33xx_pwrdm_read_next_pwrst(struct powerdomain *pwrdm)
-{
- u32 v;
-
- v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
- v &= OMAP_POWERSTATE_MASK;
- v >>= OMAP_POWERSTATE_SHIFT;
-
- return v;
-}
-
-static int am33xx_pwrdm_read_pwrst(struct powerdomain *pwrdm)
-{
- u32 v;
-
- v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs);
- v &= OMAP_POWERSTATEST_MASK;
- v >>= OMAP_POWERSTATEST_SHIFT;
-
- return v;
-}
-
-static int am33xx_pwrdm_read_prev_pwrst(struct powerdomain *pwrdm)
-{
- u32 v;
-
- v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs);
- v &= AM33XX_LASTPOWERSTATEENTERED_MASK;
- v >>= AM33XX_LASTPOWERSTATEENTERED_SHIFT;
-
- return v;
-}
-
-static int am33xx_pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm)
-{
- am33xx_prm_rmw_reg_bits(AM33XX_LOWPOWERSTATECHANGE_MASK,
- (1 << AM33XX_LOWPOWERSTATECHANGE_SHIFT),
- pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
- return 0;
-}
-
-static int am33xx_pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm)
-{
- am33xx_prm_rmw_reg_bits(AM33XX_LASTPOWERSTATEENTERED_MASK,
- AM33XX_LASTPOWERSTATEENTERED_MASK,
- pwrdm->prcm_offs, pwrdm->pwrstst_offs);
- return 0;
-}
-
-static int am33xx_pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst)
-{
- u32 m;
-
- m = pwrdm->logicretstate_mask;
- if (!m)
- return -EINVAL;
-
- am33xx_prm_rmw_reg_bits(m, (pwrst << __ffs(m)),
- pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
-
- return 0;
-}
-
-static int am33xx_pwrdm_read_logic_pwrst(struct powerdomain *pwrdm)
-{
- u32 v;
-
- v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs);
- v &= AM33XX_LOGICSTATEST_MASK;
- v >>= AM33XX_LOGICSTATEST_SHIFT;
-
- return v;
-}
-
-static int am33xx_pwrdm_read_logic_retst(struct powerdomain *pwrdm)
-{
- u32 v, m;
-
- m = pwrdm->logicretstate_mask;
- if (!m)
- return -EINVAL;
-
- v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
- v &= m;
- v >>= __ffs(m);
-
- return v;
-}
-
-static int am33xx_pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank,
- u8 pwrst)
-{
- u32 m;
-
- m = pwrdm->mem_on_mask[bank];
- if (!m)
- return -EINVAL;
-
- am33xx_prm_rmw_reg_bits(m, (pwrst << __ffs(m)),
- pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
-
- return 0;
-}
-
-static int am33xx_pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank,
- u8 pwrst)
-{
- u32 m;
-
- m = pwrdm->mem_ret_mask[bank];
- if (!m)
- return -EINVAL;
-
- am33xx_prm_rmw_reg_bits(m, (pwrst << __ffs(m)),
- pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
-
- return 0;
-}
-
-static int am33xx_pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
-{
- u32 m, v;
-
- m = pwrdm->mem_pwrst_mask[bank];
- if (!m)
- return -EINVAL;
-
- v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs);
- v &= m;
- v >>= __ffs(m);
-
- return v;
-}
-
-static int am33xx_pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank)
-{
- u32 m, v;
-
- m = pwrdm->mem_retst_mask[bank];
- if (!m)
- return -EINVAL;
-
- v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
- v &= m;
- v >>= __ffs(m);
-
- return v;
-}
-
-static int am33xx_pwrdm_wait_transition(struct powerdomain *pwrdm)
-{
- u32 c = 0;
-
- /*
- * REVISIT: pwrdm_wait_transition() may be better implemented
- * via a callback and a periodic timer check -- how long do we expect
- * powerdomain transitions to take?
- */
-
- /* XXX Is this udelay() value meaningful? */
- while ((am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs)
- & OMAP_INTRANSITION_MASK) &&
- (c++ < PWRDM_TRANSITION_BAILOUT))
- udelay(1);
-
- if (c > PWRDM_TRANSITION_BAILOUT) {
- pr_err("powerdomain: %s: waited too long to complete transition\n",
- pwrdm->name);
- return -EAGAIN;
- }
-
- pr_debug("powerdomain: completed transition in %d loops\n", c);
-
- return 0;
-}
-
-struct pwrdm_ops am33xx_pwrdm_operations = {
- .pwrdm_set_next_pwrst = am33xx_pwrdm_set_next_pwrst,
- .pwrdm_read_next_pwrst = am33xx_pwrdm_read_next_pwrst,
- .pwrdm_read_pwrst = am33xx_pwrdm_read_pwrst,
- .pwrdm_read_prev_pwrst = am33xx_pwrdm_read_prev_pwrst,
- .pwrdm_set_logic_retst = am33xx_pwrdm_set_logic_retst,
- .pwrdm_read_logic_pwrst = am33xx_pwrdm_read_logic_pwrst,
- .pwrdm_read_logic_retst = am33xx_pwrdm_read_logic_retst,
- .pwrdm_clear_all_prev_pwrst = am33xx_pwrdm_clear_all_prev_pwrst,
- .pwrdm_set_lowpwrstchange = am33xx_pwrdm_set_lowpwrstchange,
- .pwrdm_read_mem_pwrst = am33xx_pwrdm_read_mem_pwrst,
- .pwrdm_read_mem_retst = am33xx_pwrdm_read_mem_retst,
- .pwrdm_set_mem_onst = am33xx_pwrdm_set_mem_onst,
- .pwrdm_set_mem_retst = am33xx_pwrdm_set_mem_retst,
- .pwrdm_wait_transition = am33xx_pwrdm_wait_transition,
-};
diff --git a/arch/arm/mach-omap2/powerdomain44xx.c b/arch/arm/mach-omap2/powerdomain44xx.c
deleted file mode 100644
index aceb4f4..0000000
--- a/arch/arm/mach-omap2/powerdomain44xx.c
+++ /dev/null
@@ -1,285 +0,0 @@
-/*
- * OMAP4 powerdomain control
- *
- * Copyright (C) 2009-2010, 2012 Texas Instruments, Inc.
- * Copyright (C) 2007-2009 Nokia Corporation
- *
- * Derived from mach-omap2/powerdomain.c written by Paul Walmsley
- * Rajendra Nayak <rnayak@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/io.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-#include <linux/bug.h>
-
-#include "powerdomain.h"
-#include <plat/prcm.h>
-#include "prm2xxx_3xxx.h"
-#include "prm44xx.h"
-#include "prminst44xx.h"
-#include "prm-regbits-44xx.h"
-
-static int omap4_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
-{
- omap4_prminst_rmw_inst_reg_bits(OMAP_POWERSTATE_MASK,
- (pwrst << OMAP_POWERSTATE_SHIFT),
- pwrdm->prcm_partition,
- pwrdm->prcm_offs, OMAP4_PM_PWSTCTRL);
- return 0;
-}
-
-static int omap4_pwrdm_read_next_pwrst(struct powerdomain *pwrdm)
-{
- u32 v;
-
- v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
- OMAP4_PM_PWSTCTRL);
- v &= OMAP_POWERSTATE_MASK;
- v >>= OMAP_POWERSTATE_SHIFT;
-
- return v;
-}
-
-static int omap4_pwrdm_read_pwrst(struct powerdomain *pwrdm)
-{
- u32 v;
-
- v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
- OMAP4_PM_PWSTST);
- v &= OMAP_POWERSTATEST_MASK;
- v >>= OMAP_POWERSTATEST_SHIFT;
-
- return v;
-}
-
-static int omap4_pwrdm_read_prev_pwrst(struct powerdomain *pwrdm)
-{
- u32 v;
-
- v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
- OMAP4_PM_PWSTST);
- v &= OMAP4430_LASTPOWERSTATEENTERED_MASK;
- v >>= OMAP4430_LASTPOWERSTATEENTERED_SHIFT;
-
- return v;
-}
-
-static int omap4_pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm)
-{
- omap4_prminst_rmw_inst_reg_bits(OMAP4430_LOWPOWERSTATECHANGE_MASK,
- (1 << OMAP4430_LOWPOWERSTATECHANGE_SHIFT),
- pwrdm->prcm_partition,
- pwrdm->prcm_offs, OMAP4_PM_PWSTCTRL);
- return 0;
-}
-
-static int omap4_pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm)
-{
- omap4_prminst_rmw_inst_reg_bits(OMAP4430_LASTPOWERSTATEENTERED_MASK,
- OMAP4430_LASTPOWERSTATEENTERED_MASK,
- pwrdm->prcm_partition,
- pwrdm->prcm_offs, OMAP4_PM_PWSTST);
- return 0;
-}
-
-static int omap4_pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst)
-{
- u32 v;
-
- v = pwrst << __ffs(OMAP4430_LOGICRETSTATE_MASK);
- omap4_prminst_rmw_inst_reg_bits(OMAP4430_LOGICRETSTATE_MASK, v,
- pwrdm->prcm_partition, pwrdm->prcm_offs,
- OMAP4_PM_PWSTCTRL);
-
- return 0;
-}
-
-static int omap4_pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank,
- u8 pwrst)
-{
- u32 m;
-
- m = omap2_pwrdm_get_mem_bank_onstate_mask(bank);
-
- omap4_prminst_rmw_inst_reg_bits(m, (pwrst << __ffs(m)),
- pwrdm->prcm_partition, pwrdm->prcm_offs,
- OMAP4_PM_PWSTCTRL);
-
- return 0;
-}
-
-static int omap4_pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank,
- u8 pwrst)
-{
- u32 m;
-
- m = omap2_pwrdm_get_mem_bank_retst_mask(bank);
-
- omap4_prminst_rmw_inst_reg_bits(m, (pwrst << __ffs(m)),
- pwrdm->prcm_partition, pwrdm->prcm_offs,
- OMAP4_PM_PWSTCTRL);
-
- return 0;
-}
-
-static int omap4_pwrdm_read_logic_pwrst(struct powerdomain *pwrdm)
-{
- u32 v;
-
- v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
- OMAP4_PM_PWSTST);
- v &= OMAP4430_LOGICSTATEST_MASK;
- v >>= OMAP4430_LOGICSTATEST_SHIFT;
-
- return v;
-}
-
-static int omap4_pwrdm_read_logic_retst(struct powerdomain *pwrdm)
-{
- u32 v;
-
- v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
- OMAP4_PM_PWSTCTRL);
- v &= OMAP4430_LOGICRETSTATE_MASK;
- v >>= OMAP4430_LOGICRETSTATE_SHIFT;
-
- return v;
-}
-
-/**
- * omap4_pwrdm_read_prev_logic_pwrst - read the previous logic powerstate
- * @pwrdm: struct powerdomain * to read the state for
- *
- * Reads the previous logic powerstate for a powerdomain. This
- * function must determine the previous logic powerstate by first
- * checking the previous powerstate for the domain. If that was OFF,
- * then logic has been lost. If previous state was RETENTION, the
- * function reads the setting for the next retention logic state to
- * see the actual value. In every other case, the logic is
- * retained. Returns either PWRDM_POWER_OFF or PWRDM_POWER_RET
- * depending whether the logic was retained or not.
- */
-static int omap4_pwrdm_read_prev_logic_pwrst(struct powerdomain *pwrdm)
-{
- int state;
-
- state = omap4_pwrdm_read_prev_pwrst(pwrdm);
-
- if (state == PWRDM_POWER_OFF)
- return PWRDM_POWER_OFF;
-
- if (state != PWRDM_POWER_RET)
- return PWRDM_POWER_RET;
-
- return omap4_pwrdm_read_logic_retst(pwrdm);
-}
-
-static int omap4_pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
-{
- u32 m, v;
-
- m = omap2_pwrdm_get_mem_bank_stst_mask(bank);
-
- v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
- OMAP4_PM_PWSTST);
- v &= m;
- v >>= __ffs(m);
-
- return v;
-}
-
-static int omap4_pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank)
-{
- u32 m, v;
-
- m = omap2_pwrdm_get_mem_bank_retst_mask(bank);
-
- v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
- OMAP4_PM_PWSTCTRL);
- v &= m;
- v >>= __ffs(m);
-
- return v;
-}
-
-/**
- * omap4_pwrdm_read_prev_mem_pwrst - reads the previous memory powerstate
- * @pwrdm: struct powerdomain * to read mem powerstate for
- * @bank: memory bank index
- *
- * Reads the previous memory powerstate for a powerdomain. This
- * function must determine the previous memory powerstate by first
- * checking the previous powerstate for the domain. If that was OFF,
- * then logic has been lost. If previous state was RETENTION, the
- * function reads the setting for the next memory retention state to
- * see the actual value. In every other case, the logic is
- * retained. Returns either PWRDM_POWER_OFF or PWRDM_POWER_RET
- * depending whether logic was retained or not.
- */
-static int omap4_pwrdm_read_prev_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
-{
- int state;
-
- state = omap4_pwrdm_read_prev_pwrst(pwrdm);
-
- if (state == PWRDM_POWER_OFF)
- return PWRDM_POWER_OFF;
-
- if (state != PWRDM_POWER_RET)
- return PWRDM_POWER_RET;
-
- return omap4_pwrdm_read_mem_retst(pwrdm, bank);
-}
-
-static int omap4_pwrdm_wait_transition(struct powerdomain *pwrdm)
-{
- u32 c = 0;
-
- /*
- * REVISIT: pwrdm_wait_transition() may be better implemented
- * via a callback and a periodic timer check -- how long do we expect
- * powerdomain transitions to take?
- */
-
- /* XXX Is this udelay() value meaningful? */
- while ((omap4_prminst_read_inst_reg(pwrdm->prcm_partition,
- pwrdm->prcm_offs,
- OMAP4_PM_PWSTST) &
- OMAP_INTRANSITION_MASK) &&
- (c++ < PWRDM_TRANSITION_BAILOUT))
- udelay(1);
-
- if (c > PWRDM_TRANSITION_BAILOUT) {
- pr_err("powerdomain: %s: waited too long to complete transition\n",
- pwrdm->name);
- return -EAGAIN;
- }
-
- pr_debug("powerdomain: completed transition in %d loops\n", c);
-
- return 0;
-}
-
-struct pwrdm_ops omap4_pwrdm_operations = {
- .pwrdm_set_next_pwrst = omap4_pwrdm_set_next_pwrst,
- .pwrdm_read_next_pwrst = omap4_pwrdm_read_next_pwrst,
- .pwrdm_read_pwrst = omap4_pwrdm_read_pwrst,
- .pwrdm_read_prev_pwrst = omap4_pwrdm_read_prev_pwrst,
- .pwrdm_set_lowpwrstchange = omap4_pwrdm_set_lowpwrstchange,
- .pwrdm_clear_all_prev_pwrst = omap4_pwrdm_clear_all_prev_pwrst,
- .pwrdm_set_logic_retst = omap4_pwrdm_set_logic_retst,
- .pwrdm_read_logic_pwrst = omap4_pwrdm_read_logic_pwrst,
- .pwrdm_read_prev_logic_pwrst = omap4_pwrdm_read_prev_logic_pwrst,
- .pwrdm_read_logic_retst = omap4_pwrdm_read_logic_retst,
- .pwrdm_read_mem_pwrst = omap4_pwrdm_read_mem_pwrst,
- .pwrdm_read_mem_retst = omap4_pwrdm_read_mem_retst,
- .pwrdm_read_prev_mem_pwrst = omap4_pwrdm_read_prev_mem_pwrst,
- .pwrdm_set_mem_onst = omap4_pwrdm_set_mem_onst,
- .pwrdm_set_mem_retst = omap4_pwrdm_set_mem_retst,
- .pwrdm_wait_transition = omap4_pwrdm_wait_transition,
-};
diff --git a/arch/arm/mach-omap2/powerdomains2xxx_data.c b/arch/arm/mach-omap2/powerdomains2xxx_data.c
index 2385c1f..ba520d4 100644
--- a/arch/arm/mach-omap2/powerdomains2xxx_data.c
+++ b/arch/arm/mach-omap2/powerdomains2xxx_data.c
@@ -14,6 +14,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
+#include "soc.h"
#include "powerdomain.h"
#include "powerdomains2xxx_3xxx_data.h"
diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h
index 72df974..c7d355f 100644
--- a/arch/arm/mach-omap2/prcm-common.h
+++ b/arch/arm/mach-omap2/prcm-common.h
@@ -406,11 +406,6 @@
#define OMAP3430_EN_CORE_MASK (1 << 0)
-/*
- * MAX_MODULE_HARDRESET_WAIT: Maximum microseconds to wait for an OMAP
- * submodule to exit hardreset
- */
-#define MAX_MODULE_HARDRESET_WAIT 10000
/*
* Maximum time(us) it takes to output the signal WUCLKOUT of the last
@@ -419,24 +414,7 @@
* microseconds on OMAP4, so this timeout may be too high.
*/
#define MAX_IOPAD_LATCH_TIME 100
-
# ifndef __ASSEMBLER__
-extern void __iomem *prm_base;
-extern void __iomem *cm_base;
-extern void __iomem *cm2_base;
-extern void __iomem *prcm_mpu_base;
-
-#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
-extern void omap_prm_base_init(void);
-extern void omap_cm_base_init(void);
-#else
-static inline void omap_prm_base_init(void)
-{
-}
-static inline void omap_cm_base_init(void)
-{
-}
-#endif
/**
* struct omap_prcm_irq - describes a PRCM interrupt bit
diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c
deleted file mode 100644
index 0f51e03..0000000
--- a/arch/arm/mach-omap2/prcm.c
+++ /dev/null
@@ -1,188 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/prcm.c
- *
- * OMAP 24xx Power Reset and Clock Management (PRCM) functions
- *
- * Copyright (C) 2005 Nokia Corporation
- *
- * Written by Tony Lindgren <tony.lindgren@nokia.com>
- *
- * Copyright (C) 2007 Texas Instruments, Inc.
- * Rajendra Nayak <rnayak@ti.com>
- *
- * Some pieces of code Copyright (C) 2005 Texas Instruments, Inc.
- * Upgraded with OMAP4 support by Abhijit Pagare <abhijitpagare@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/delay.h>
-#include <linux/export.h>
-
-#include "common.h"
-#include <plat/prcm.h>
-
-#include "clock.h"
-#include "clock2xxx.h"
-#include "cm2xxx_3xxx.h"
-#include "prm2xxx_3xxx.h"
-#include "prm44xx.h"
-#include "prminst44xx.h"
-#include "cminst44xx.h"
-#include "prm-regbits-24xx.h"
-#include "prm-regbits-44xx.h"
-#include "control.h"
-
-void __iomem *prm_base;
-void __iomem *cm_base;
-void __iomem *cm2_base;
-void __iomem *prcm_mpu_base;
-
-#define MAX_MODULE_ENABLE_WAIT 100000
-
-u32 omap_prcm_get_reset_sources(void)
-{
- /* XXX This presumably needs modification for 34XX */
- if (cpu_is_omap24xx() || cpu_is_omap34xx())
- return omap2_prm_read_mod_reg(WKUP_MOD, OMAP2_RM_RSTST) & 0x7f;
- if (cpu_is_omap44xx())
- return omap2_prm_read_mod_reg(WKUP_MOD, OMAP4_RM_RSTST) & 0x7f;
-
- return 0;
-}
-EXPORT_SYMBOL(omap_prcm_get_reset_sources);
-
-/* Resets clock rates and reboots the system. Only called from system.h */
-void omap_prcm_restart(char mode, const char *cmd)
-{
- s16 prcm_offs = 0;
-
- if (cpu_is_omap24xx()) {
- omap2xxx_clk_prepare_for_reboot();
-
- prcm_offs = WKUP_MOD;
- } else if (cpu_is_omap34xx()) {
- prcm_offs = OMAP3430_GR_MOD;
- omap3_ctrl_write_boot_mode((cmd ? (u8)*cmd : 0));
- } else if (cpu_is_omap44xx()) {
- omap4_prminst_global_warm_sw_reset(); /* never returns */
- } else {
- WARN_ON(1);
- }
-
- /*
- * As per Errata i520, in some cases, user will not be able to
- * access DDR memory after warm-reset.
- * This situation occurs while the warm-reset happens during a read
- * access to DDR memory. In that particular condition, DDR memory
- * does not respond to a corrupted read command due to the warm
- * reset occurrence but SDRC is waiting for read completion.
- * SDRC is not sensitive to the warm reset, but the interconnect is
- * reset on the fly, thus causing a misalignment between SDRC logic,
- * interconnect logic and DDR memory state.
- * WORKAROUND:
- * Steps to perform before a Warm reset is trigged:
- * 1. enable self-refresh on idle request
- * 2. put SDRC in idle
- * 3. wait until SDRC goes to idle
- * 4. generate SW reset (Global SW reset)
- *
- * Steps to be performed after warm reset occurs (in bootloader):
- * if HW warm reset is the source, apply below steps before any
- * accesses to SDRAM:
- * 1. Reset SMS and SDRC and wait till reset is complete
- * 2. Re-initialize SMS, SDRC and memory
- *
- * NOTE: Above work around is required only if arch reset is implemented
- * using Global SW reset(GLOBAL_SW_RST). DPLL3 reset does not need
- * the WA since it resets SDRC as well as part of cold reset.
- */
-
- /* XXX should be moved to some OMAP2/3 specific code */
- omap2_prm_set_mod_reg_bits(OMAP_RST_DPLL3_MASK, prcm_offs,
- OMAP2_RM_RSTCTRL);
- omap2_prm_read_mod_reg(prcm_offs, OMAP2_RM_RSTCTRL); /* OCP barrier */
-}
-
-/**
- * omap2_cm_wait_idlest - wait for IDLEST bit to indicate module readiness
- * @reg: physical address of module IDLEST register
- * @mask: value to mask against to determine if the module is active
- * @idlest: idle state indicator (0 or 1) for the clock
- * @name: name of the clock (for printk)
- *
- * Returns 1 if the module indicated readiness in time, or 0 if it
- * failed to enable in roughly MAX_MODULE_ENABLE_WAIT microseconds.
- *
- * XXX This function is deprecated. It should be removed once the
- * hwmod conversion is complete.
- */
-int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, u8 idlest,
- const char *name)
-{
- int i = 0;
- int ena = 0;
-
- if (idlest)
- ena = 0;
- else
- ena = mask;
-
- /* Wait for lock */
- omap_test_timeout(((__raw_readl(reg) & mask) == ena),
- MAX_MODULE_ENABLE_WAIT, i);
-
- if (i < MAX_MODULE_ENABLE_WAIT)
- pr_debug("cm: Module associated with clock %s ready after %d loops\n",
- name, i);
- else
- pr_err("cm: Module associated with clock %s didn't enable in %d tries\n",
- name, MAX_MODULE_ENABLE_WAIT);
-
- return (i < MAX_MODULE_ENABLE_WAIT) ? 1 : 0;
-};
-
-void __init omap2_set_globals_prcm(struct omap_globals *omap2_globals)
-{
- if (omap2_globals->prm)
- prm_base = omap2_globals->prm;
- if (omap2_globals->cm)
- cm_base = omap2_globals->cm;
- if (omap2_globals->cm2)
- cm2_base = omap2_globals->cm2;
- if (omap2_globals->prcm_mpu)
- prcm_mpu_base = omap2_globals->prcm_mpu;
-
- if (cpu_is_omap44xx() || soc_is_omap54xx()) {
- omap_prm_base_init();
- omap_cm_base_init();
- }
-}
-
-/*
- * Stubbed functions so that common files continue to build when
- * custom builds are used
- * XXX These are temporary and should be removed at the earliest possible
- * opportunity
- */
-int __weak omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs,
- u16 clkctrl_offs)
-{
- return 0;
-}
-
-void __weak omap4_cminst_module_enable(u8 mode, u8 part, u16 inst,
- s16 cdoffs, u16 clkctrl_offs)
-{
-}
-
-void __weak omap4_cminst_module_disable(u8 part, u16 inst, s16 cdoffs,
- u16 clkctrl_offs)
-{
-}
diff --git a/arch/arm/mach-omap2/prcm_mpu44xx.c b/arch/arm/mach-omap2/prcm_mpu44xx.c
index 928dbd4..c30e44a 100644
--- a/arch/arm/mach-omap2/prcm_mpu44xx.c
+++ b/arch/arm/mach-omap2/prcm_mpu44xx.c
@@ -20,6 +20,12 @@
#include "prcm_mpu44xx.h"
#include "cm-regbits-44xx.h"
+/*
+ * prcm_mpu_base: the virtual address of the start of the PRCM_MPU IP
+ * block registers
+ */
+void __iomem *prcm_mpu_base;
+
/* PRCM_MPU low-level functions */
u32 omap4_prcm_mpu_read_inst_reg(s16 inst, u16 reg)
@@ -43,3 +49,14 @@
return v;
}
+
+/**
+ * omap2_set_globals_prcm_mpu - set the MPU PRCM base address (for early use)
+ * @prcm_mpu: PRCM_MPU base virtual address
+ *
+ * XXX Will be replaced when the PRM/CM drivers are completed.
+ */
+void __init omap2_set_globals_prcm_mpu(void __iomem *prcm_mpu)
+{
+ prcm_mpu_base = prcm_mpu;
+}
diff --git a/arch/arm/mach-omap2/prcm_mpu44xx.h b/arch/arm/mach-omap2/prcm_mpu44xx.h
index 8a6e250..884af7b 100644
--- a/arch/arm/mach-omap2/prcm_mpu44xx.h
+++ b/arch/arm/mach-omap2/prcm_mpu44xx.h
@@ -1,7 +1,7 @@
/*
* OMAP44xx PRCM MPU instance offset macros
*
- * Copyright (C) 2010 Texas Instruments, Inc.
+ * Copyright (C) 2010, 2012 Texas Instruments, Inc.
* Copyright (C) 2010 Nokia Corporation
*
* Paul Walmsley (paul@pwsan.com)
@@ -25,6 +25,12 @@
#ifndef __ARCH_ARM_MACH_OMAP2_PRCM_MPU44XX_H
#define __ARCH_ARM_MACH_OMAP2_PRCM_MPU44XX_H
+#include "common.h"
+
+# ifndef __ASSEMBLER__
+extern void __iomem *prcm_mpu_base;
+# endif
+
#define OMAP4430_PRCM_MPU_BASE 0x48243000
#define OMAP44XX_PRCM_MPU_REGADDR(inst, reg) \
@@ -98,6 +104,7 @@
extern void omap4_prcm_mpu_write_inst_reg(u32 val, s16 inst, u16 idx);
extern u32 omap4_prcm_mpu_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst,
s16 idx);
+extern void __init omap2_set_globals_prcm_mpu(void __iomem *prcm_mpu);
# endif
#endif
diff --git a/arch/arm/mach-omap2/prm-regbits-24xx.h b/arch/arm/mach-omap2/prm-regbits-24xx.h
index 6ac96610..638da6dd 100644
--- a/arch/arm/mach-omap2/prm-regbits-24xx.h
+++ b/arch/arm/mach-omap2/prm-regbits-24xx.h
@@ -14,7 +14,7 @@
* published by the Free Software Foundation.
*/
-#include "prm2xxx_3xxx.h"
+#include "prm2xxx.h"
/* Bits shared between registers */
@@ -209,9 +209,13 @@
/* RM_RSTST_WKUP specific bits */
/* 2430 calls EXTWMPU_RST "EXTWARM_RST" and GLOBALWMPU_RST "GLOBALWARM_RST" */
+#define OMAP24XX_EXTWMPU_RST_SHIFT 6
#define OMAP24XX_EXTWMPU_RST_MASK (1 << 6)
+#define OMAP24XX_SECU_WD_RST_SHIFT 5
#define OMAP24XX_SECU_WD_RST_MASK (1 << 5)
+#define OMAP24XX_MPU_WD_RST_SHIFT 4
#define OMAP24XX_MPU_WD_RST_MASK (1 << 4)
+#define OMAP24XX_SECU_VIOL_RST_SHIFT 3
#define OMAP24XX_SECU_VIOL_RST_MASK (1 << 3)
/* PM_WKEN_WKUP specific bits */
diff --git a/arch/arm/mach-omap2/prm-regbits-34xx.h b/arch/arm/mach-omap2/prm-regbits-34xx.h
index 64c087a..838b594 100644
--- a/arch/arm/mach-omap2/prm-regbits-34xx.h
+++ b/arch/arm/mach-omap2/prm-regbits-34xx.h
@@ -14,7 +14,7 @@
#define __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_34XX_H
-#include "prm2xxx_3xxx.h"
+#include "prm3xxx.h"
/* Shared register bits */
@@ -509,15 +509,25 @@
#define OMAP3430_RSTTIME1_MASK (0xff << 0)
/* PRM_RSTST */
+#define OMAP3430_ICECRUSHER_RST_SHIFT 10
#define OMAP3430_ICECRUSHER_RST_MASK (1 << 10)
+#define OMAP3430_ICEPICK_RST_SHIFT 9
#define OMAP3430_ICEPICK_RST_MASK (1 << 9)
+#define OMAP3430_VDD2_VOLTAGE_MANAGER_RST_SHIFT 8
#define OMAP3430_VDD2_VOLTAGE_MANAGER_RST_MASK (1 << 8)
+#define OMAP3430_VDD1_VOLTAGE_MANAGER_RST_SHIFT 7
#define OMAP3430_VDD1_VOLTAGE_MANAGER_RST_MASK (1 << 7)
+#define OMAP3430_EXTERNAL_WARM_RST_SHIFT 6
#define OMAP3430_EXTERNAL_WARM_RST_MASK (1 << 6)
+#define OMAP3430_SECURE_WD_RST_SHIFT 5
#define OMAP3430_SECURE_WD_RST_MASK (1 << 5)
+#define OMAP3430_MPU_WD_RST_SHIFT 4
#define OMAP3430_MPU_WD_RST_MASK (1 << 4)
+#define OMAP3430_SECURITY_VIOL_RST_SHIFT 3
#define OMAP3430_SECURITY_VIOL_RST_MASK (1 << 3)
+#define OMAP3430_GLOBAL_SW_RST_SHIFT 1
#define OMAP3430_GLOBAL_SW_RST_MASK (1 << 1)
+#define OMAP3430_GLOBAL_COLD_RST_SHIFT 0
#define OMAP3430_GLOBAL_COLD_RST_MASK (1 << 0)
/* PRM_VOLTCTRL */
diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h
index 39d5621..a1a266c 100644
--- a/arch/arm/mach-omap2/prm.h
+++ b/arch/arm/mach-omap2/prm.h
@@ -1,7 +1,7 @@
/*
* OMAP2/3/4 Power/Reset Management (PRM) bitfield definitions
*
- * Copyright (C) 2007-2009 Texas Instruments, Inc.
+ * Copyright (C) 2007-2009, 2012 Texas Instruments, Inc.
* Copyright (C) 2010 Nokia Corporation
*
* Paul Walmsley
@@ -15,6 +15,28 @@
#include "prcm-common.h"
+# ifndef __ASSEMBLER__
+extern void __iomem *prm_base;
+extern void omap2_set_globals_prm(void __iomem *prm);
+# endif
+
+
+/*
+ * MAX_MODULE_SOFTRESET_WAIT: Maximum microseconds to wait for OMAP
+ * module to softreset
+ */
+#define MAX_MODULE_SOFTRESET_WAIT 10000
+
+/*
+ * MAX_MODULE_HARDRESET_WAIT: Maximum microseconds to wait for an OMAP
+ * submodule to exit hardreset
+ */
+#define MAX_MODULE_HARDRESET_WAIT 10000
+
+/*
+ * Register bitfields
+ */
+
/*
* 24XX: PM_PWSTST_CORE, PM_PWSTST_GFX, PM_PWSTST_MPU, PM_PWSTST_DSP
*
@@ -52,5 +74,58 @@
#define OMAP_POWERSTATE_SHIFT 0
#define OMAP_POWERSTATE_MASK (0x3 << 0)
+/*
+ * Standardized OMAP reset source bits
+ *
+ * To the extent these happen to match the hardware register bit
+ * shifts, it's purely coincidental. Used by omap-wdt.c.
+ * OMAP_UNKNOWN_RST_SRC_ID_SHIFT is a special value, used whenever
+ * there are any bits remaining in the global PRM_RSTST register that
+ * haven't been identified, or when the PRM code for the current SoC
+ * doesn't know how to interpret the register.
+ */
+#define OMAP_GLOBAL_COLD_RST_SRC_ID_SHIFT 0
+#define OMAP_GLOBAL_WARM_RST_SRC_ID_SHIFT 1
+#define OMAP_SECU_VIOL_RST_SRC_ID_SHIFT 2
+#define OMAP_MPU_WD_RST_SRC_ID_SHIFT 3
+#define OMAP_SECU_WD_RST_SRC_ID_SHIFT 4
+#define OMAP_EXTWARM_RST_SRC_ID_SHIFT 5
+#define OMAP_VDD_MPU_VM_RST_SRC_ID_SHIFT 6
+#define OMAP_VDD_IVA_VM_RST_SRC_ID_SHIFT 7
+#define OMAP_VDD_CORE_VM_RST_SRC_ID_SHIFT 8
+#define OMAP_ICEPICK_RST_SRC_ID_SHIFT 9
+#define OMAP_ICECRUSHER_RST_SRC_ID_SHIFT 10
+#define OMAP_C2C_RST_SRC_ID_SHIFT 11
+#define OMAP_UNKNOWN_RST_SRC_ID_SHIFT 12
+
+#ifndef __ASSEMBLER__
+
+/**
+ * struct prm_reset_src_map - map register bitshifts to standard bitshifts
+ * @reg_shift: bitshift in the PRM reset source register
+ * @std_shift: bitshift equivalent in the standard reset source list
+ *
+ * The fields are signed because -1 is used as a terminator.
+ */
+struct prm_reset_src_map {
+ s8 reg_shift;
+ s8 std_shift;
+};
+
+/**
+ * struct prm_ll_data - fn ptrs to per-SoC PRM function implementations
+ * @read_reset_sources: ptr to the Soc PRM-specific get_reset_source impl
+ */
+struct prm_ll_data {
+ u32 (*read_reset_sources)(void);
+};
+
+extern int prm_register(struct prm_ll_data *pld);
+extern int prm_unregister(struct prm_ll_data *pld);
+
+extern u32 prm_read_reset_sources(void);
+
+#endif
+
#endif
diff --git a/arch/arm/mach-omap2/prm2xxx.c b/arch/arm/mach-omap2/prm2xxx.c
new file mode 100644
index 0000000..bf24fc4
--- /dev/null
+++ b/arch/arm/mach-omap2/prm2xxx.c
@@ -0,0 +1,139 @@
+/*
+ * OMAP2xxx PRM module functions
+ *
+ * Copyright (C) 2010-2012 Texas Instruments, Inc.
+ * Copyright (C) 2010 Nokia Corporation
+ * Benoît Cousson
+ * Paul Walmsley
+ * Rajendra Nayak <rnayak@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+
+#include "common.h"
+#include <plat/cpu.h>
+
+#include "vp.h"
+#include "powerdomain.h"
+#include "clockdomain.h"
+#include "prm2xxx.h"
+#include "cm2xxx_3xxx.h"
+#include "prm-regbits-24xx.h"
+
+/*
+ * omap2xxx_prm_reset_src_map - map from bits in the PRM_RSTST_WKUP
+ * hardware register (which are specific to the OMAP2xxx SoCs) to
+ * reset source ID bit shifts (which is an OMAP SoC-independent
+ * enumeration)
+ */
+static struct prm_reset_src_map omap2xxx_prm_reset_src_map[] = {
+ { OMAP_GLOBALCOLD_RST_SHIFT, OMAP_GLOBAL_COLD_RST_SRC_ID_SHIFT },
+ { OMAP_GLOBALWARM_RST_SHIFT, OMAP_GLOBAL_WARM_RST_SRC_ID_SHIFT },
+ { OMAP24XX_SECU_VIOL_RST_SHIFT, OMAP_SECU_VIOL_RST_SRC_ID_SHIFT },
+ { OMAP24XX_MPU_WD_RST_SHIFT, OMAP_MPU_WD_RST_SRC_ID_SHIFT },
+ { OMAP24XX_SECU_WD_RST_SHIFT, OMAP_SECU_WD_RST_SRC_ID_SHIFT },
+ { OMAP24XX_EXTWMPU_RST_SHIFT, OMAP_EXTWARM_RST_SRC_ID_SHIFT },
+ { -1, -1 },
+};
+
+/**
+ * omap2xxx_prm_read_reset_sources - return the last SoC reset source
+ *
+ * Return a u32 representing the last reset sources of the SoC. The
+ * returned reset source bits are standardized across OMAP SoCs.
+ */
+static u32 omap2xxx_prm_read_reset_sources(void)
+{
+ struct prm_reset_src_map *p;
+ u32 r = 0;
+ u32 v;
+
+ v = omap2_prm_read_mod_reg(WKUP_MOD, OMAP2_RM_RSTST);
+
+ p = omap2xxx_prm_reset_src_map;
+ while (p->reg_shift >= 0 && p->std_shift >= 0) {
+ if (v & (1 << p->reg_shift))
+ r |= 1 << p->std_shift;
+ p++;
+ }
+
+ return r;
+}
+
+/**
+ * omap2xxx_prm_dpll_reset - use DPLL reset to reboot the OMAP SoC
+ *
+ * Set the DPLL reset bit, which should reboot the SoC. This is the
+ * recommended way to restart the SoC. No return value.
+ */
+void omap2xxx_prm_dpll_reset(void)
+{
+ omap2_prm_set_mod_reg_bits(OMAP_RST_DPLL3_MASK, WKUP_MOD,
+ OMAP2_RM_RSTCTRL);
+ /* OCP barrier */
+ omap2_prm_read_mod_reg(WKUP_MOD, OMAP2_RM_RSTCTRL);
+}
+
+int omap2xxx_clkdm_sleep(struct clockdomain *clkdm)
+{
+ omap2_prm_set_mod_reg_bits(OMAP24XX_FORCESTATE_MASK,
+ clkdm->pwrdm.ptr->prcm_offs,
+ OMAP2_PM_PWSTCTRL);
+ return 0;
+}
+
+int omap2xxx_clkdm_wakeup(struct clockdomain *clkdm)
+{
+ omap2_prm_clear_mod_reg_bits(OMAP24XX_FORCESTATE_MASK,
+ clkdm->pwrdm.ptr->prcm_offs,
+ OMAP2_PM_PWSTCTRL);
+ return 0;
+}
+
+struct pwrdm_ops omap2_pwrdm_operations = {
+ .pwrdm_set_next_pwrst = omap2_pwrdm_set_next_pwrst,
+ .pwrdm_read_next_pwrst = omap2_pwrdm_read_next_pwrst,
+ .pwrdm_read_pwrst = omap2_pwrdm_read_pwrst,
+ .pwrdm_set_logic_retst = omap2_pwrdm_set_logic_retst,
+ .pwrdm_set_mem_onst = omap2_pwrdm_set_mem_onst,
+ .pwrdm_set_mem_retst = omap2_pwrdm_set_mem_retst,
+ .pwrdm_read_mem_pwrst = omap2_pwrdm_read_mem_pwrst,
+ .pwrdm_read_mem_retst = omap2_pwrdm_read_mem_retst,
+ .pwrdm_wait_transition = omap2_pwrdm_wait_transition,
+};
+
+/*
+ *
+ */
+
+static struct prm_ll_data omap2xxx_prm_ll_data = {
+ .read_reset_sources = &omap2xxx_prm_read_reset_sources,
+};
+
+static int __init omap2xxx_prm_init(void)
+{
+ if (!cpu_is_omap24xx())
+ return 0;
+
+ return prm_register(&omap2xxx_prm_ll_data);
+}
+subsys_initcall(omap2xxx_prm_init);
+
+static void __exit omap2xxx_prm_exit(void)
+{
+ if (!cpu_is_omap24xx())
+ return;
+
+ /* Should never happen */
+ WARN(prm_unregister(&omap2xxx_prm_ll_data),
+ "%s: prm_ll_data function pointer mismatch\n", __func__);
+}
+__exitcall(omap2xxx_prm_exit);
diff --git a/arch/arm/mach-omap2/prm2xxx.h b/arch/arm/mach-omap2/prm2xxx.h
new file mode 100644
index 0000000..fe8a14f
--- /dev/null
+++ b/arch/arm/mach-omap2/prm2xxx.h
@@ -0,0 +1,134 @@
+/*
+ * OMAP2xxx Power/Reset Management (PRM) register definitions
+ *
+ * Copyright (C) 2007-2009, 2011-2012 Texas Instruments, Inc.
+ * Copyright (C) 2008-2010 Nokia Corporation
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * The PRM hardware modules on the OMAP2/3 are quite similar to each
+ * other. The PRM on OMAP4 has a new register layout, and is handled
+ * in a separate file.
+ */
+#ifndef __ARCH_ARM_MACH_OMAP2_PRM2XXX_H
+#define __ARCH_ARM_MACH_OMAP2_PRM2XXX_H
+
+#include "prcm-common.h"
+#include "prm.h"
+#include "prm2xxx_3xxx.h"
+
+#define OMAP2420_PRM_REGADDR(module, reg) \
+ OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg))
+#define OMAP2430_PRM_REGADDR(module, reg) \
+ OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE + (module) + (reg))
+
+/*
+ * OMAP2-specific global PRM registers
+ * Use __raw_{read,write}l() with these registers.
+ *
+ * With a few exceptions, these are the register names beginning with
+ * PRCM_* on 24xx. (The exceptions are the IRQSTATUS and IRQENABLE
+ * bits.)
+ *
+ */
+
+#define OMAP2_PRCM_REVISION_OFFSET 0x0000
+#define OMAP2420_PRCM_REVISION OMAP2420_PRM_REGADDR(OCP_MOD, 0x0000)
+#define OMAP2_PRCM_SYSCONFIG_OFFSET 0x0010
+#define OMAP2420_PRCM_SYSCONFIG OMAP2420_PRM_REGADDR(OCP_MOD, 0x0010)
+
+#define OMAP2_PRCM_IRQSTATUS_MPU_OFFSET 0x0018
+#define OMAP2420_PRCM_IRQSTATUS_MPU OMAP2420_PRM_REGADDR(OCP_MOD, 0x0018)
+#define OMAP2_PRCM_IRQENABLE_MPU_OFFSET 0x001c
+#define OMAP2420_PRCM_IRQENABLE_MPU OMAP2420_PRM_REGADDR(OCP_MOD, 0x001c)
+
+#define OMAP2_PRCM_VOLTCTRL_OFFSET 0x0050
+#define OMAP2420_PRCM_VOLTCTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0050)
+#define OMAP2_PRCM_VOLTST_OFFSET 0x0054
+#define OMAP2420_PRCM_VOLTST OMAP2420_PRM_REGADDR(OCP_MOD, 0x0054)
+#define OMAP2_PRCM_CLKSRC_CTRL_OFFSET 0x0060
+#define OMAP2420_PRCM_CLKSRC_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0060)
+#define OMAP2_PRCM_CLKOUT_CTRL_OFFSET 0x0070
+#define OMAP2420_PRCM_CLKOUT_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0070)
+#define OMAP2_PRCM_CLKEMUL_CTRL_OFFSET 0x0078
+#define OMAP2420_PRCM_CLKEMUL_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0078)
+#define OMAP2_PRCM_CLKCFG_CTRL_OFFSET 0x0080
+#define OMAP2420_PRCM_CLKCFG_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0080)
+#define OMAP2_PRCM_CLKCFG_STATUS_OFFSET 0x0084
+#define OMAP2420_PRCM_CLKCFG_STATUS OMAP2420_PRM_REGADDR(OCP_MOD, 0x0084)
+#define OMAP2_PRCM_VOLTSETUP_OFFSET 0x0090
+#define OMAP2420_PRCM_VOLTSETUP OMAP2420_PRM_REGADDR(OCP_MOD, 0x0090)
+#define OMAP2_PRCM_CLKSSETUP_OFFSET 0x0094
+#define OMAP2420_PRCM_CLKSSETUP OMAP2420_PRM_REGADDR(OCP_MOD, 0x0094)
+#define OMAP2_PRCM_POLCTRL_OFFSET 0x0098
+#define OMAP2420_PRCM_POLCTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0098)
+
+#define OMAP2430_PRCM_REVISION OMAP2430_PRM_REGADDR(OCP_MOD, 0x0000)
+#define OMAP2430_PRCM_SYSCONFIG OMAP2430_PRM_REGADDR(OCP_MOD, 0x0010)
+
+#define OMAP2430_PRCM_IRQSTATUS_MPU OMAP2430_PRM_REGADDR(OCP_MOD, 0x0018)
+#define OMAP2430_PRCM_IRQENABLE_MPU OMAP2430_PRM_REGADDR(OCP_MOD, 0x001c)
+
+#define OMAP2430_PRCM_VOLTCTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0050)
+#define OMAP2430_PRCM_VOLTST OMAP2430_PRM_REGADDR(OCP_MOD, 0x0054)
+#define OMAP2430_PRCM_CLKSRC_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0060)
+#define OMAP2430_PRCM_CLKOUT_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0070)
+#define OMAP2430_PRCM_CLKEMUL_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0078)
+#define OMAP2430_PRCM_CLKCFG_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0080)
+#define OMAP2430_PRCM_CLKCFG_STATUS OMAP2430_PRM_REGADDR(OCP_MOD, 0x0084)
+#define OMAP2430_PRCM_VOLTSETUP OMAP2430_PRM_REGADDR(OCP_MOD, 0x0090)
+#define OMAP2430_PRCM_CLKSSETUP OMAP2430_PRM_REGADDR(OCP_MOD, 0x0094)
+#define OMAP2430_PRCM_POLCTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0098)
+
+/*
+ * Module specific PRM register offsets from PRM_BASE + domain offset
+ *
+ * Use prm_{read,write}_mod_reg() with these registers.
+ *
+ * With a few exceptions, these are the register names beginning with
+ * {PM,RM}_* on both OMAP2/3 SoC families.. (The exceptions are the
+ * IRQSTATUS and IRQENABLE bits.)
+ */
+
+/* Register offsets appearing on both OMAP2 and OMAP3 */
+
+#define OMAP2_RM_RSTCTRL 0x0050
+#define OMAP2_RM_RSTTIME 0x0054
+#define OMAP2_RM_RSTST 0x0058
+#define OMAP2_PM_PWSTCTRL 0x00e0
+#define OMAP2_PM_PWSTST 0x00e4
+
+#define PM_WKEN 0x00a0
+#define PM_WKEN1 PM_WKEN
+#define PM_WKST 0x00b0
+#define PM_WKST1 PM_WKST
+#define PM_WKDEP 0x00c8
+#define PM_EVGENCTRL 0x00d4
+#define PM_EVGENONTIM 0x00d8
+#define PM_EVGENOFFTIM 0x00dc
+
+/* OMAP2xxx specific register offsets */
+#define OMAP24XX_PM_WKEN2 0x00a4
+#define OMAP24XX_PM_WKST2 0x00b4
+
+#define OMAP24XX_PRCM_IRQSTATUS_DSP 0x00f0 /* IVA mod */
+#define OMAP24XX_PRCM_IRQENABLE_DSP 0x00f4 /* IVA mod */
+#define OMAP24XX_PRCM_IRQSTATUS_IVA 0x00f8
+#define OMAP24XX_PRCM_IRQENABLE_IVA 0x00fc
+
+#ifndef __ASSEMBLER__
+/* Function prototypes */
+extern int omap2xxx_clkdm_sleep(struct clockdomain *clkdm);
+extern int omap2xxx_clkdm_wakeup(struct clockdomain *clkdm);
+
+extern void omap2xxx_prm_dpll_reset(void);
+
+extern int __init prm2xxx_init(void);
+extern int __exit prm2xxx_exit(void);
+
+#endif
+
+#endif
diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.c b/arch/arm/mach-omap2/prm2xxx_3xxx.c
index 9529984..30517f5 100644
--- a/arch/arm/mach-omap2/prm2xxx_3xxx.c
+++ b/arch/arm/mach-omap2/prm2xxx_3xxx.c
@@ -15,82 +15,12 @@
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/io.h>
-#include <linux/irq.h>
-#include <plat/prcm.h>
-
-#include "soc.h"
#include "common.h"
-#include "vp.h"
-
+#include "powerdomain.h"
#include "prm2xxx_3xxx.h"
-#include "cm2xxx_3xxx.h"
#include "prm-regbits-24xx.h"
-#include "prm-regbits-34xx.h"
-
-static const struct omap_prcm_irq omap3_prcm_irqs[] = {
- OMAP_PRCM_IRQ("wkup", 0, 0),
- OMAP_PRCM_IRQ("io", 9, 1),
-};
-
-static struct omap_prcm_irq_setup omap3_prcm_irq_setup = {
- .ack = OMAP3_PRM_IRQSTATUS_MPU_OFFSET,
- .mask = OMAP3_PRM_IRQENABLE_MPU_OFFSET,
- .nr_regs = 1,
- .irqs = omap3_prcm_irqs,
- .nr_irqs = ARRAY_SIZE(omap3_prcm_irqs),
- .irq = 11 + OMAP_INTC_START,
- .read_pending_irqs = &omap3xxx_prm_read_pending_irqs,
- .ocp_barrier = &omap3xxx_prm_ocp_barrier,
- .save_and_clear_irqen = &omap3xxx_prm_save_and_clear_irqen,
- .restore_irqen = &omap3xxx_prm_restore_irqen,
-};
-
-u32 omap2_prm_read_mod_reg(s16 module, u16 idx)
-{
- return __raw_readl(prm_base + module + idx);
-}
-
-void omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx)
-{
- __raw_writel(val, prm_base + module + idx);
-}
-
-/* Read-modify-write a register in a PRM module. Caller must lock */
-u32 omap2_prm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx)
-{
- u32 v;
-
- v = omap2_prm_read_mod_reg(module, idx);
- v &= ~mask;
- v |= bits;
- omap2_prm_write_mod_reg(v, module, idx);
-
- return v;
-}
-
-/* Read a PRM register, AND it, and shift the result down to bit 0 */
-u32 omap2_prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask)
-{
- u32 v;
-
- v = omap2_prm_read_mod_reg(domain, idx);
- v &= mask;
- v >>= __ffs(mask);
-
- return v;
-}
-
-u32 omap2_prm_set_mod_reg_bits(u32 bits, s16 module, s16 idx)
-{
- return omap2_prm_rmw_mod_reg_bits(bits, bits, module, idx);
-}
-
-u32 omap2_prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
-{
- return omap2_prm_rmw_mod_reg_bits(bits, 0x0, module, idx);
-}
-
+#include "clockdomain.h"
/**
* omap2_prm_is_hardreset_asserted - read the HW reset line state of
@@ -104,9 +34,6 @@
*/
int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift)
{
- if (!(cpu_is_omap24xx() || cpu_is_omap34xx()))
- return -EINVAL;
-
return omap2_prm_read_mod_bits_shift(prm_mod, OMAP2_RM_RSTCTRL,
(1 << shift));
}
@@ -127,9 +54,6 @@
{
u32 mask;
- if (!(cpu_is_omap24xx() || cpu_is_omap34xx()))
- return -EINVAL;
-
mask = 1 << shift;
omap2_prm_rmw_mod_reg_bits(mask, mask, prm_mod, OMAP2_RM_RSTCTRL);
@@ -156,9 +80,6 @@
u32 rst, st;
int c;
- if (!(cpu_is_omap24xx() || cpu_is_omap34xx()))
- return -EINVAL;
-
rst = 1 << rst_shift;
st = 1 << st_shift;
@@ -178,188 +99,155 @@
return (c == MAX_MODULE_HARDRESET_WAIT) ? -EBUSY : 0;
}
-/* PRM VP */
-/*
- * struct omap3_vp - OMAP3 VP register access description.
- * @tranxdone_status: VP_TRANXDONE_ST bitmask in PRM_IRQSTATUS_MPU reg
- */
-struct omap3_vp {
- u32 tranxdone_status;
-};
+/* Powerdomain low-level functions */
-static struct omap3_vp omap3_vp[] = {
- [OMAP3_VP_VDD_MPU_ID] = {
- .tranxdone_status = OMAP3430_VP1_TRANXDONE_ST_MASK,
- },
- [OMAP3_VP_VDD_CORE_ID] = {
- .tranxdone_status = OMAP3430_VP2_TRANXDONE_ST_MASK,
- },
-};
-
-#define MAX_VP_ID ARRAY_SIZE(omap3_vp);
-
-u32 omap3_prm_vp_check_txdone(u8 vp_id)
+/* Common functions across OMAP2 and OMAP3 */
+int omap2_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
{
- struct omap3_vp *vp = &omap3_vp[vp_id];
- u32 irqstatus;
-
- irqstatus = omap2_prm_read_mod_reg(OCP_MOD,
- OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
- return irqstatus & vp->tranxdone_status;
+ omap2_prm_rmw_mod_reg_bits(OMAP_POWERSTATE_MASK,
+ (pwrst << OMAP_POWERSTATE_SHIFT),
+ pwrdm->prcm_offs, OMAP2_PM_PWSTCTRL);
+ return 0;
}
-void omap3_prm_vp_clear_txdone(u8 vp_id)
+int omap2_pwrdm_read_next_pwrst(struct powerdomain *pwrdm)
{
- struct omap3_vp *vp = &omap3_vp[vp_id];
-
- omap2_prm_write_mod_reg(vp->tranxdone_status,
- OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+ return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
+ OMAP2_PM_PWSTCTRL,
+ OMAP_POWERSTATE_MASK);
}
-u32 omap3_prm_vcvp_read(u8 offset)
+int omap2_pwrdm_read_pwrst(struct powerdomain *pwrdm)
{
- return omap2_prm_read_mod_reg(OMAP3430_GR_MOD, offset);
+ return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
+ OMAP2_PM_PWSTST,
+ OMAP_POWERSTATEST_MASK);
}
-void omap3_prm_vcvp_write(u32 val, u8 offset)
+int omap2_pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank,
+ u8 pwrst)
{
- omap2_prm_write_mod_reg(val, OMAP3430_GR_MOD, offset);
+ u32 m;
+
+ m = omap2_pwrdm_get_mem_bank_onstate_mask(bank);
+
+ omap2_prm_rmw_mod_reg_bits(m, (pwrst << __ffs(m)), pwrdm->prcm_offs,
+ OMAP2_PM_PWSTCTRL);
+
+ return 0;
}
-u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset)
+int omap2_pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank,
+ u8 pwrst)
{
- return omap2_prm_rmw_mod_reg_bits(mask, bits, OMAP3430_GR_MOD, offset);
+ u32 m;
+
+ m = omap2_pwrdm_get_mem_bank_retst_mask(bank);
+
+ omap2_prm_rmw_mod_reg_bits(m, (pwrst << __ffs(m)), pwrdm->prcm_offs,
+ OMAP2_PM_PWSTCTRL);
+
+ return 0;
}
-/**
- * omap3xxx_prm_read_pending_irqs - read pending PRM MPU IRQs into @events
- * @events: ptr to a u32, preallocated by caller
- *
- * Read PRM_IRQSTATUS_MPU bits, AND'ed with the currently-enabled PRM
- * MPU IRQs, and store the result into the u32 pointed to by @events.
- * No return value.
- */
-void omap3xxx_prm_read_pending_irqs(unsigned long *events)
+int omap2_pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
{
- u32 mask, st;
+ u32 m;
- /* XXX Can the mask read be avoided (e.g., can it come from RAM?) */
- mask = omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET);
- st = omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+ m = omap2_pwrdm_get_mem_bank_stst_mask(bank);
- events[0] = mask & st;
+ return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs, OMAP2_PM_PWSTST,
+ m);
}
-/**
- * omap3xxx_prm_ocp_barrier - force buffered MPU writes to the PRM to complete
- *
- * Force any buffered writes to the PRM IP block to complete. Needed
- * by the PRM IRQ handler, which reads and writes directly to the IP
- * block, to avoid race conditions after acknowledging or clearing IRQ
- * bits. No return value.
- */
-void omap3xxx_prm_ocp_barrier(void)
+int omap2_pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank)
{
- omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_REVISION_OFFSET);
+ u32 m;
+
+ m = omap2_pwrdm_get_mem_bank_retst_mask(bank);
+
+ return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
+ OMAP2_PM_PWSTCTRL, m);
}
-/**
- * omap3xxx_prm_save_and_clear_irqen - save/clear PRM_IRQENABLE_MPU reg
- * @saved_mask: ptr to a u32 array to save IRQENABLE bits
- *
- * Save the PRM_IRQENABLE_MPU register to @saved_mask. @saved_mask
- * must be allocated by the caller. Intended to be used in the PRM
- * interrupt handler suspend callback. The OCP barrier is needed to
- * ensure the write to disable PRM interrupts reaches the PRM before
- * returning; otherwise, spurious interrupts might occur. No return
- * value.
- */
-void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask)
+int omap2_pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst)
{
- saved_mask[0] = omap2_prm_read_mod_reg(OCP_MOD,
- OMAP3_PRM_IRQENABLE_MPU_OFFSET);
- omap2_prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET);
+ u32 v;
- /* OCP barrier */
- omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_REVISION_OFFSET);
+ v = pwrst << __ffs(OMAP_LOGICRETSTATE_MASK);
+ omap2_prm_rmw_mod_reg_bits(OMAP_LOGICRETSTATE_MASK, v, pwrdm->prcm_offs,
+ OMAP2_PM_PWSTCTRL);
+
+ return 0;
}
-/**
- * omap3xxx_prm_restore_irqen - set PRM_IRQENABLE_MPU register from args
- * @saved_mask: ptr to a u32 array of IRQENABLE bits saved previously
- *
- * Restore the PRM_IRQENABLE_MPU register from @saved_mask. Intended
- * to be used in the PRM interrupt handler resume callback to restore
- * values saved by omap3xxx_prm_save_and_clear_irqen(). No OCP
- * barrier should be needed here; any pending PRM interrupts will fire
- * once the writes reach the PRM. No return value.
- */
-void omap3xxx_prm_restore_irqen(u32 *saved_mask)
+int omap2_pwrdm_wait_transition(struct powerdomain *pwrdm)
{
- omap2_prm_write_mod_reg(saved_mask[0], OCP_MOD,
- OMAP3_PRM_IRQENABLE_MPU_OFFSET);
-}
+ u32 c = 0;
-/**
- * omap3xxx_prm_reconfigure_io_chain - clear latches and reconfigure I/O chain
- *
- * Clear any previously-latched I/O wakeup events and ensure that the
- * I/O wakeup gates are aligned with the current mux settings. Works
- * by asserting WUCLKIN, waiting for WUCLKOUT to be asserted, and then
- * deasserting WUCLKIN and clearing the ST_IO_CHAIN WKST bit. No
- * return value.
- */
-void omap3xxx_prm_reconfigure_io_chain(void)
-{
- int i = 0;
+ /*
+ * REVISIT: pwrdm_wait_transition() may be better implemented
+ * via a callback and a periodic timer check -- how long do we expect
+ * powerdomain transitions to take?
+ */
- omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
- PM_WKEN);
+ /* XXX Is this udelay() value meaningful? */
+ while ((omap2_prm_read_mod_reg(pwrdm->prcm_offs, OMAP2_PM_PWSTST) &
+ OMAP_INTRANSITION_MASK) &&
+ (c++ < PWRDM_TRANSITION_BAILOUT))
+ udelay(1);
- omap_test_timeout(omap2_prm_read_mod_reg(WKUP_MOD, PM_WKST) &
- OMAP3430_ST_IO_CHAIN_MASK,
- MAX_IOPAD_LATCH_TIME, i);
- if (i == MAX_IOPAD_LATCH_TIME)
- pr_warn("PRM: I/O chain clock line assertion timed out\n");
-
- omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
- PM_WKEN);
-
- omap2_prm_set_mod_reg_bits(OMAP3430_ST_IO_CHAIN_MASK, WKUP_MOD,
- PM_WKST);
-
- omap2_prm_read_mod_reg(WKUP_MOD, PM_WKST);
-}
-
-/**
- * omap3xxx_prm_enable_io_wakeup - enable wakeup events from I/O wakeup latches
- *
- * Activates the I/O wakeup event latches and allows events logged by
- * those latches to signal a wakeup event to the PRCM. For I/O
- * wakeups to occur, WAKEUPENABLE bits must be set in the pad mux
- * registers, and omap3xxx_prm_reconfigure_io_chain() must be called.
- * No return value.
- */
-static void __init omap3xxx_prm_enable_io_wakeup(void)
-{
- if (omap3_has_io_wakeup())
- omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD,
- PM_WKEN);
-}
-
-static int __init omap3xxx_prcm_init(void)
-{
- int ret = 0;
-
- if (cpu_is_omap34xx()) {
- omap3xxx_prm_enable_io_wakeup();
- ret = omap_prcm_register_chain_handler(&omap3_prcm_irq_setup);
- if (!ret)
- irq_set_status_flags(omap_prcm_event_to_irq("io"),
- IRQ_NOAUTOEN);
+ if (c > PWRDM_TRANSITION_BAILOUT) {
+ pr_err("powerdomain: %s: waited too long to complete transition\n",
+ pwrdm->name);
+ return -EAGAIN;
}
- return ret;
+ pr_debug("powerdomain: completed transition in %d loops\n", c);
+
+ return 0;
}
-subsys_initcall(omap3xxx_prcm_init);
+
+int omap2_clkdm_add_wkdep(struct clockdomain *clkdm1,
+ struct clockdomain *clkdm2)
+{
+ omap2_prm_set_mod_reg_bits((1 << clkdm2->dep_bit),
+ clkdm1->pwrdm.ptr->prcm_offs, PM_WKDEP);
+ return 0;
+}
+
+int omap2_clkdm_del_wkdep(struct clockdomain *clkdm1,
+ struct clockdomain *clkdm2)
+{
+ omap2_prm_clear_mod_reg_bits((1 << clkdm2->dep_bit),
+ clkdm1->pwrdm.ptr->prcm_offs, PM_WKDEP);
+ return 0;
+}
+
+int omap2_clkdm_read_wkdep(struct clockdomain *clkdm1,
+ struct clockdomain *clkdm2)
+{
+ return omap2_prm_read_mod_bits_shift(clkdm1->pwrdm.ptr->prcm_offs,
+ PM_WKDEP, (1 << clkdm2->dep_bit));
+}
+
+int omap2_clkdm_clear_all_wkdeps(struct clockdomain *clkdm)
+{
+ struct clkdm_dep *cd;
+ u32 mask = 0;
+
+ for (cd = clkdm->wkdep_srcs; cd && cd->clkdm_name; cd++) {
+ if (!cd->clkdm)
+ continue; /* only happens if data is erroneous */
+
+ /* PRM accesses are slow, so minimize them */
+ mask |= 1 << cd->clkdm->dep_bit;
+ atomic_set(&cd->wkdep_usecount, 0);
+ }
+
+ omap2_prm_clear_mod_reg_bits(mask, clkdm->pwrdm.ptr->prcm_offs,
+ PM_WKDEP);
+ return 0;
+}
+
diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.h b/arch/arm/mach-omap2/prm2xxx_3xxx.h
index c19d249..78532d6f 100644
--- a/arch/arm/mach-omap2/prm2xxx_3xxx.h
+++ b/arch/arm/mach-omap2/prm2xxx_3xxx.h
@@ -1,7 +1,7 @@
/*
- * OMAP2/3 Power/Reset Management (PRM) register definitions
+ * OMAP2xxx/3xxx-common Power/Reset Management (PRM) register definitions
*
- * Copyright (C) 2007-2009, 2011 Texas Instruments, Inc.
+ * Copyright (C) 2007-2009, 2011-2012 Texas Instruments, Inc.
* Copyright (C) 2008-2010 Nokia Corporation
* Paul Walmsley
*
@@ -19,160 +19,6 @@
#include "prcm-common.h"
#include "prm.h"
-#define OMAP2420_PRM_REGADDR(module, reg) \
- OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg))
-#define OMAP2430_PRM_REGADDR(module, reg) \
- OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE + (module) + (reg))
-#define OMAP34XX_PRM_REGADDR(module, reg) \
- OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg))
-
-
-/*
- * OMAP2-specific global PRM registers
- * Use __raw_{read,write}l() with these registers.
- *
- * With a few exceptions, these are the register names beginning with
- * PRCM_* on 24xx. (The exceptions are the IRQSTATUS and IRQENABLE
- * bits.)
- *
- */
-
-#define OMAP2_PRCM_REVISION_OFFSET 0x0000
-#define OMAP2420_PRCM_REVISION OMAP2420_PRM_REGADDR(OCP_MOD, 0x0000)
-#define OMAP2_PRCM_SYSCONFIG_OFFSET 0x0010
-#define OMAP2420_PRCM_SYSCONFIG OMAP2420_PRM_REGADDR(OCP_MOD, 0x0010)
-
-#define OMAP2_PRCM_IRQSTATUS_MPU_OFFSET 0x0018
-#define OMAP2420_PRCM_IRQSTATUS_MPU OMAP2420_PRM_REGADDR(OCP_MOD, 0x0018)
-#define OMAP2_PRCM_IRQENABLE_MPU_OFFSET 0x001c
-#define OMAP2420_PRCM_IRQENABLE_MPU OMAP2420_PRM_REGADDR(OCP_MOD, 0x001c)
-
-#define OMAP2_PRCM_VOLTCTRL_OFFSET 0x0050
-#define OMAP2420_PRCM_VOLTCTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0050)
-#define OMAP2_PRCM_VOLTST_OFFSET 0x0054
-#define OMAP2420_PRCM_VOLTST OMAP2420_PRM_REGADDR(OCP_MOD, 0x0054)
-#define OMAP2_PRCM_CLKSRC_CTRL_OFFSET 0x0060
-#define OMAP2420_PRCM_CLKSRC_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0060)
-#define OMAP2_PRCM_CLKOUT_CTRL_OFFSET 0x0070
-#define OMAP2420_PRCM_CLKOUT_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0070)
-#define OMAP2_PRCM_CLKEMUL_CTRL_OFFSET 0x0078
-#define OMAP2420_PRCM_CLKEMUL_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0078)
-#define OMAP2_PRCM_CLKCFG_CTRL_OFFSET 0x0080
-#define OMAP2420_PRCM_CLKCFG_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0080)
-#define OMAP2_PRCM_CLKCFG_STATUS_OFFSET 0x0084
-#define OMAP2420_PRCM_CLKCFG_STATUS OMAP2420_PRM_REGADDR(OCP_MOD, 0x0084)
-#define OMAP2_PRCM_VOLTSETUP_OFFSET 0x0090
-#define OMAP2420_PRCM_VOLTSETUP OMAP2420_PRM_REGADDR(OCP_MOD, 0x0090)
-#define OMAP2_PRCM_CLKSSETUP_OFFSET 0x0094
-#define OMAP2420_PRCM_CLKSSETUP OMAP2420_PRM_REGADDR(OCP_MOD, 0x0094)
-#define OMAP2_PRCM_POLCTRL_OFFSET 0x0098
-#define OMAP2420_PRCM_POLCTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0098)
-
-#define OMAP2430_PRCM_REVISION OMAP2430_PRM_REGADDR(OCP_MOD, 0x0000)
-#define OMAP2430_PRCM_SYSCONFIG OMAP2430_PRM_REGADDR(OCP_MOD, 0x0010)
-
-#define OMAP2430_PRCM_IRQSTATUS_MPU OMAP2430_PRM_REGADDR(OCP_MOD, 0x0018)
-#define OMAP2430_PRCM_IRQENABLE_MPU OMAP2430_PRM_REGADDR(OCP_MOD, 0x001c)
-
-#define OMAP2430_PRCM_VOLTCTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0050)
-#define OMAP2430_PRCM_VOLTST OMAP2430_PRM_REGADDR(OCP_MOD, 0x0054)
-#define OMAP2430_PRCM_CLKSRC_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0060)
-#define OMAP2430_PRCM_CLKOUT_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0070)
-#define OMAP2430_PRCM_CLKEMUL_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0078)
-#define OMAP2430_PRCM_CLKCFG_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0080)
-#define OMAP2430_PRCM_CLKCFG_STATUS OMAP2430_PRM_REGADDR(OCP_MOD, 0x0084)
-#define OMAP2430_PRCM_VOLTSETUP OMAP2430_PRM_REGADDR(OCP_MOD, 0x0090)
-#define OMAP2430_PRCM_CLKSSETUP OMAP2430_PRM_REGADDR(OCP_MOD, 0x0094)
-#define OMAP2430_PRCM_POLCTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0098)
-
-/*
- * OMAP3-specific global PRM registers
- * Use __raw_{read,write}l() with these registers.
- *
- * With a few exceptions, these are the register names beginning with
- * PRM_* on 34xx. (The exceptions are the IRQSTATUS and IRQENABLE
- * bits.)
- */
-
-#define OMAP3_PRM_REVISION_OFFSET 0x0004
-#define OMAP3430_PRM_REVISION OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0004)
-#define OMAP3_PRM_SYSCONFIG_OFFSET 0x0014
-#define OMAP3430_PRM_SYSCONFIG OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0014)
-
-#define OMAP3_PRM_IRQSTATUS_MPU_OFFSET 0x0018
-#define OMAP3430_PRM_IRQSTATUS_MPU OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0018)
-#define OMAP3_PRM_IRQENABLE_MPU_OFFSET 0x001c
-#define OMAP3430_PRM_IRQENABLE_MPU OMAP34XX_PRM_REGADDR(OCP_MOD, 0x001c)
-
-
-#define OMAP3_PRM_VC_SMPS_SA_OFFSET 0x0020
-#define OMAP3430_PRM_VC_SMPS_SA OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0020)
-#define OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET 0x0024
-#define OMAP3430_PRM_VC_SMPS_VOL_RA OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0024)
-#define OMAP3_PRM_VC_SMPS_CMD_RA_OFFSET 0x0028
-#define OMAP3430_PRM_VC_SMPS_CMD_RA OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0028)
-#define OMAP3_PRM_VC_CMD_VAL_0_OFFSET 0x002c
-#define OMAP3430_PRM_VC_CMD_VAL_0 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x002c)
-#define OMAP3_PRM_VC_CMD_VAL_1_OFFSET 0x0030
-#define OMAP3430_PRM_VC_CMD_VAL_1 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0030)
-#define OMAP3_PRM_VC_CH_CONF_OFFSET 0x0034
-#define OMAP3430_PRM_VC_CH_CONF OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0034)
-#define OMAP3_PRM_VC_I2C_CFG_OFFSET 0x0038
-#define OMAP3430_PRM_VC_I2C_CFG OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0038)
-#define OMAP3_PRM_VC_BYPASS_VAL_OFFSET 0x003c
-#define OMAP3430_PRM_VC_BYPASS_VAL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x003c)
-#define OMAP3_PRM_RSTCTRL_OFFSET 0x0050
-#define OMAP3430_PRM_RSTCTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0050)
-#define OMAP3_PRM_RSTTIME_OFFSET 0x0054
-#define OMAP3430_PRM_RSTTIME OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0054)
-#define OMAP3_PRM_RSTST_OFFSET 0x0058
-#define OMAP3430_PRM_RSTST OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0058)
-#define OMAP3_PRM_VOLTCTRL_OFFSET 0x0060
-#define OMAP3430_PRM_VOLTCTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0060)
-#define OMAP3_PRM_SRAM_PCHARGE_OFFSET 0x0064
-#define OMAP3430_PRM_SRAM_PCHARGE OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0064)
-#define OMAP3_PRM_CLKSRC_CTRL_OFFSET 0x0070
-#define OMAP3430_PRM_CLKSRC_CTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0070)
-#define OMAP3_PRM_VOLTSETUP1_OFFSET 0x0090
-#define OMAP3430_PRM_VOLTSETUP1 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0090)
-#define OMAP3_PRM_VOLTOFFSET_OFFSET 0x0094
-#define OMAP3430_PRM_VOLTOFFSET OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0094)
-#define OMAP3_PRM_CLKSETUP_OFFSET 0x0098
-#define OMAP3430_PRM_CLKSETUP OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0098)
-#define OMAP3_PRM_POLCTRL_OFFSET 0x009c
-#define OMAP3430_PRM_POLCTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x009c)
-#define OMAP3_PRM_VOLTSETUP2_OFFSET 0x00a0
-#define OMAP3430_PRM_VOLTSETUP2 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00a0)
-#define OMAP3_PRM_VP1_CONFIG_OFFSET 0x00b0
-#define OMAP3430_PRM_VP1_CONFIG OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b0)
-#define OMAP3_PRM_VP1_VSTEPMIN_OFFSET 0x00b4
-#define OMAP3430_PRM_VP1_VSTEPMIN OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b4)
-#define OMAP3_PRM_VP1_VSTEPMAX_OFFSET 0x00b8
-#define OMAP3430_PRM_VP1_VSTEPMAX OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b8)
-#define OMAP3_PRM_VP1_VLIMITTO_OFFSET 0x00bc
-#define OMAP3430_PRM_VP1_VLIMITTO OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00bc)
-#define OMAP3_PRM_VP1_VOLTAGE_OFFSET 0x00c0
-#define OMAP3430_PRM_VP1_VOLTAGE OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c0)
-#define OMAP3_PRM_VP1_STATUS_OFFSET 0x00c4
-#define OMAP3430_PRM_VP1_STATUS OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c4)
-#define OMAP3_PRM_VP2_CONFIG_OFFSET 0x00d0
-#define OMAP3430_PRM_VP2_CONFIG OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d0)
-#define OMAP3_PRM_VP2_VSTEPMIN_OFFSET 0x00d4
-#define OMAP3430_PRM_VP2_VSTEPMIN OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d4)
-#define OMAP3_PRM_VP2_VSTEPMAX_OFFSET 0x00d8
-#define OMAP3430_PRM_VP2_VSTEPMAX OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d8)
-#define OMAP3_PRM_VP2_VLIMITTO_OFFSET 0x00dc
-#define OMAP3430_PRM_VP2_VLIMITTO OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00dc)
-#define OMAP3_PRM_VP2_VOLTAGE_OFFSET 0x00e0
-#define OMAP3430_PRM_VP2_VOLTAGE OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e0)
-#define OMAP3_PRM_VP2_STATUS_OFFSET 0x00e4
-#define OMAP3430_PRM_VP2_STATUS OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e4)
-
-#define OMAP3_PRM_CLKSEL_OFFSET 0x0040
-#define OMAP3430_PRM_CLKSEL OMAP34XX_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0040)
-#define OMAP3_PRM_CLKOUT_CTRL_OFFSET 0x0070
-#define OMAP3430_PRM_CLKOUT_CTRL OMAP34XX_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0070)
-
/*
* Module specific PRM register offsets from PRM_BASE + domain offset
*
@@ -200,66 +46,83 @@
#define PM_EVGENONTIM 0x00d8
#define PM_EVGENOFFTIM 0x00dc
-/* OMAP2xxx specific register offsets */
-#define OMAP24XX_PM_WKEN2 0x00a4
-#define OMAP24XX_PM_WKST2 0x00b4
-
-#define OMAP24XX_PRCM_IRQSTATUS_DSP 0x00f0 /* IVA mod */
-#define OMAP24XX_PRCM_IRQENABLE_DSP 0x00f4 /* IVA mod */
-#define OMAP24XX_PRCM_IRQSTATUS_IVA 0x00f8
-#define OMAP24XX_PRCM_IRQENABLE_IVA 0x00fc
-
-/* OMAP3 specific register offsets */
-#define OMAP3430ES2_PM_WKEN3 0x00f0
-#define OMAP3430ES2_PM_WKST3 0x00b8
-
-#define OMAP3430_PM_MPUGRPSEL 0x00a4
-#define OMAP3430_PM_MPUGRPSEL1 OMAP3430_PM_MPUGRPSEL
-#define OMAP3430ES2_PM_MPUGRPSEL3 0x00f8
-
-#define OMAP3430_PM_IVAGRPSEL 0x00a8
-#define OMAP3430_PM_IVAGRPSEL1 OMAP3430_PM_IVAGRPSEL
-#define OMAP3430ES2_PM_IVAGRPSEL3 0x00f4
-
-#define OMAP3430_PM_PREPWSTST 0x00e8
-
-#define OMAP3430_PRM_IRQSTATUS_IVA2 0x00f8
-#define OMAP3430_PRM_IRQENABLE_IVA2 0x00fc
-
#ifndef __ASSEMBLER__
+
+#include <linux/io.h>
+#include "powerdomain.h"
+
/* Power/reset management domain register get/set */
-extern u32 omap2_prm_read_mod_reg(s16 module, u16 idx);
-extern void omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx);
-extern u32 omap2_prm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx);
-extern u32 omap2_prm_set_mod_reg_bits(u32 bits, s16 module, s16 idx);
-extern u32 omap2_prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx);
-extern u32 omap2_prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask);
+static inline u32 omap2_prm_read_mod_reg(s16 module, u16 idx)
+{
+ return __raw_readl(prm_base + module + idx);
+}
+
+static inline void omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx)
+{
+ __raw_writel(val, prm_base + module + idx);
+}
+
+/* Read-modify-write a register in a PRM module. Caller must lock */
+static inline u32 omap2_prm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module,
+ s16 idx)
+{
+ u32 v;
+
+ v = omap2_prm_read_mod_reg(module, idx);
+ v &= ~mask;
+ v |= bits;
+ omap2_prm_write_mod_reg(v, module, idx);
+
+ return v;
+}
+
+/* Read a PRM register, AND it, and shift the result down to bit 0 */
+static inline u32 omap2_prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask)
+{
+ u32 v;
+
+ v = omap2_prm_read_mod_reg(domain, idx);
+ v &= mask;
+ v >>= __ffs(mask);
+
+ return v;
+}
+
+static inline u32 omap2_prm_set_mod_reg_bits(u32 bits, s16 module, s16 idx)
+{
+ return omap2_prm_rmw_mod_reg_bits(bits, bits, module, idx);
+}
+
+static inline u32 omap2_prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
+{
+ return omap2_prm_rmw_mod_reg_bits(bits, 0x0, module, idx);
+}
/* These omap2_ PRM functions apply to both OMAP2 and 3 */
extern int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift);
extern int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift);
extern int omap2_prm_deassert_hardreset(s16 prm_mod, u8 rst_shift, u8 st_shift);
-/* OMAP3-specific VP functions */
-u32 omap3_prm_vp_check_txdone(u8 vp_id);
-void omap3_prm_vp_clear_txdone(u8 vp_id);
+extern int omap2_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst);
+extern int omap2_pwrdm_read_next_pwrst(struct powerdomain *pwrdm);
+extern int omap2_pwrdm_read_pwrst(struct powerdomain *pwrdm);
+extern int omap2_pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank,
+ u8 pwrst);
+extern int omap2_pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank,
+ u8 pwrst);
+extern int omap2_pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank);
+extern int omap2_pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank);
+extern int omap2_pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst);
+extern int omap2_pwrdm_wait_transition(struct powerdomain *pwrdm);
-/*
- * OMAP3 access functions for voltage controller (VC) and
- * voltage proccessor (VP) in the PRM.
- */
-extern u32 omap3_prm_vcvp_read(u8 offset);
-extern void omap3_prm_vcvp_write(u32 val, u8 offset);
-extern u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset);
-
-extern void omap3xxx_prm_reconfigure_io_chain(void);
-
-/* PRM interrupt-related functions */
-extern void omap3xxx_prm_read_pending_irqs(unsigned long *events);
-extern void omap3xxx_prm_ocp_barrier(void);
-extern void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask);
-extern void omap3xxx_prm_restore_irqen(u32 *saved_mask);
+extern int omap2_clkdm_add_wkdep(struct clockdomain *clkdm1,
+ struct clockdomain *clkdm2);
+extern int omap2_clkdm_del_wkdep(struct clockdomain *clkdm1,
+ struct clockdomain *clkdm2);
+extern int omap2_clkdm_read_wkdep(struct clockdomain *clkdm1,
+ struct clockdomain *clkdm2);
+extern int omap2_clkdm_clear_all_wkdeps(struct clockdomain *clkdm);
#endif /* __ASSEMBLER */
@@ -348,7 +211,9 @@
*
* 3430: RM_RSTST_CORE, RM_RSTST_EMU
*/
+#define OMAP_GLOBALWARM_RST_SHIFT 1
#define OMAP_GLOBALWARM_RST_MASK (1 << 1)
+#define OMAP_GLOBALCOLD_RST_SHIFT 0
#define OMAP_GLOBALCOLD_RST_MASK (1 << 0)
/*
@@ -376,11 +241,4 @@
#define OMAP_LOGICRETSTATE_MASK (1 << 2)
-/*
- * MAX_MODULE_HARDRESET_WAIT: Maximum microseconds to wait for an OMAP
- * submodule to exit hardreset
- */
-#define MAX_MODULE_HARDRESET_WAIT 10000
-
-
#endif
diff --git a/arch/arm/mach-omap2/prm33xx.c b/arch/arm/mach-omap2/prm33xx.c
index e7dbb6c..1ac7388 100644
--- a/arch/arm/mach-omap2/prm33xx.c
+++ b/arch/arm/mach-omap2/prm33xx.c
@@ -19,9 +19,8 @@
#include <linux/err.h>
#include <linux/io.h>
-#include <plat/common.h>
-
#include "common.h"
+#include "powerdomain.h"
#include "prm33xx.h"
#include "prm-regbits-33xx.h"
@@ -133,3 +132,204 @@
return (c == MAX_MODULE_HARDRESET_WAIT) ? -EBUSY : 0;
}
+
+static int am33xx_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
+{
+ am33xx_prm_rmw_reg_bits(OMAP_POWERSTATE_MASK,
+ (pwrst << OMAP_POWERSTATE_SHIFT),
+ pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
+ return 0;
+}
+
+static int am33xx_pwrdm_read_next_pwrst(struct powerdomain *pwrdm)
+{
+ u32 v;
+
+ v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
+ v &= OMAP_POWERSTATE_MASK;
+ v >>= OMAP_POWERSTATE_SHIFT;
+
+ return v;
+}
+
+static int am33xx_pwrdm_read_pwrst(struct powerdomain *pwrdm)
+{
+ u32 v;
+
+ v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs);
+ v &= OMAP_POWERSTATEST_MASK;
+ v >>= OMAP_POWERSTATEST_SHIFT;
+
+ return v;
+}
+
+static int am33xx_pwrdm_read_prev_pwrst(struct powerdomain *pwrdm)
+{
+ u32 v;
+
+ v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs);
+ v &= AM33XX_LASTPOWERSTATEENTERED_MASK;
+ v >>= AM33XX_LASTPOWERSTATEENTERED_SHIFT;
+
+ return v;
+}
+
+static int am33xx_pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm)
+{
+ am33xx_prm_rmw_reg_bits(AM33XX_LOWPOWERSTATECHANGE_MASK,
+ (1 << AM33XX_LOWPOWERSTATECHANGE_SHIFT),
+ pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
+ return 0;
+}
+
+static int am33xx_pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm)
+{
+ am33xx_prm_rmw_reg_bits(AM33XX_LASTPOWERSTATEENTERED_MASK,
+ AM33XX_LASTPOWERSTATEENTERED_MASK,
+ pwrdm->prcm_offs, pwrdm->pwrstst_offs);
+ return 0;
+}
+
+static int am33xx_pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst)
+{
+ u32 m;
+
+ m = pwrdm->logicretstate_mask;
+ if (!m)
+ return -EINVAL;
+
+ am33xx_prm_rmw_reg_bits(m, (pwrst << __ffs(m)),
+ pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
+
+ return 0;
+}
+
+static int am33xx_pwrdm_read_logic_pwrst(struct powerdomain *pwrdm)
+{
+ u32 v;
+
+ v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs);
+ v &= AM33XX_LOGICSTATEST_MASK;
+ v >>= AM33XX_LOGICSTATEST_SHIFT;
+
+ return v;
+}
+
+static int am33xx_pwrdm_read_logic_retst(struct powerdomain *pwrdm)
+{
+ u32 v, m;
+
+ m = pwrdm->logicretstate_mask;
+ if (!m)
+ return -EINVAL;
+
+ v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
+ v &= m;
+ v >>= __ffs(m);
+
+ return v;
+}
+
+static int am33xx_pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank,
+ u8 pwrst)
+{
+ u32 m;
+
+ m = pwrdm->mem_on_mask[bank];
+ if (!m)
+ return -EINVAL;
+
+ am33xx_prm_rmw_reg_bits(m, (pwrst << __ffs(m)),
+ pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
+
+ return 0;
+}
+
+static int am33xx_pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank,
+ u8 pwrst)
+{
+ u32 m;
+
+ m = pwrdm->mem_ret_mask[bank];
+ if (!m)
+ return -EINVAL;
+
+ am33xx_prm_rmw_reg_bits(m, (pwrst << __ffs(m)),
+ pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
+
+ return 0;
+}
+
+static int am33xx_pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
+{
+ u32 m, v;
+
+ m = pwrdm->mem_pwrst_mask[bank];
+ if (!m)
+ return -EINVAL;
+
+ v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs);
+ v &= m;
+ v >>= __ffs(m);
+
+ return v;
+}
+
+static int am33xx_pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank)
+{
+ u32 m, v;
+
+ m = pwrdm->mem_retst_mask[bank];
+ if (!m)
+ return -EINVAL;
+
+ v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstctrl_offs);
+ v &= m;
+ v >>= __ffs(m);
+
+ return v;
+}
+
+static int am33xx_pwrdm_wait_transition(struct powerdomain *pwrdm)
+{
+ u32 c = 0;
+
+ /*
+ * REVISIT: pwrdm_wait_transition() may be better implemented
+ * via a callback and a periodic timer check -- how long do we expect
+ * powerdomain transitions to take?
+ */
+
+ /* XXX Is this udelay() value meaningful? */
+ while ((am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs)
+ & OMAP_INTRANSITION_MASK) &&
+ (c++ < PWRDM_TRANSITION_BAILOUT))
+ udelay(1);
+
+ if (c > PWRDM_TRANSITION_BAILOUT) {
+ pr_err("powerdomain: %s: waited too long to complete transition\n",
+ pwrdm->name);
+ return -EAGAIN;
+ }
+
+ pr_debug("powerdomain: completed transition in %d loops\n", c);
+
+ return 0;
+}
+
+struct pwrdm_ops am33xx_pwrdm_operations = {
+ .pwrdm_set_next_pwrst = am33xx_pwrdm_set_next_pwrst,
+ .pwrdm_read_next_pwrst = am33xx_pwrdm_read_next_pwrst,
+ .pwrdm_read_pwrst = am33xx_pwrdm_read_pwrst,
+ .pwrdm_read_prev_pwrst = am33xx_pwrdm_read_prev_pwrst,
+ .pwrdm_set_logic_retst = am33xx_pwrdm_set_logic_retst,
+ .pwrdm_read_logic_pwrst = am33xx_pwrdm_read_logic_pwrst,
+ .pwrdm_read_logic_retst = am33xx_pwrdm_read_logic_retst,
+ .pwrdm_clear_all_prev_pwrst = am33xx_pwrdm_clear_all_prev_pwrst,
+ .pwrdm_set_lowpwrstchange = am33xx_pwrdm_set_lowpwrstchange,
+ .pwrdm_read_mem_pwrst = am33xx_pwrdm_read_mem_pwrst,
+ .pwrdm_read_mem_retst = am33xx_pwrdm_read_mem_retst,
+ .pwrdm_set_mem_onst = am33xx_pwrdm_set_mem_onst,
+ .pwrdm_set_mem_retst = am33xx_pwrdm_set_mem_retst,
+ .pwrdm_wait_transition = am33xx_pwrdm_wait_transition,
+};
diff --git a/arch/arm/mach-omap2/prm3xxx.c b/arch/arm/mach-omap2/prm3xxx.c
new file mode 100644
index 0000000..b86116c
--- /dev/null
+++ b/arch/arm/mach-omap2/prm3xxx.c
@@ -0,0 +1,417 @@
+/*
+ * OMAP3xxx PRM module functions
+ *
+ * Copyright (C) 2010-2012 Texas Instruments, Inc.
+ * Copyright (C) 2010 Nokia Corporation
+ * Benoît Cousson
+ * Paul Walmsley
+ * Rajendra Nayak <rnayak@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+
+#include "common.h"
+#include <plat/cpu.h>
+
+#include "vp.h"
+#include "powerdomain.h"
+#include "prm3xxx.h"
+#include "prm2xxx_3xxx.h"
+#include "cm2xxx_3xxx.h"
+#include "prm-regbits-34xx.h"
+
+static const struct omap_prcm_irq omap3_prcm_irqs[] = {
+ OMAP_PRCM_IRQ("wkup", 0, 0),
+ OMAP_PRCM_IRQ("io", 9, 1),
+};
+
+static struct omap_prcm_irq_setup omap3_prcm_irq_setup = {
+ .ack = OMAP3_PRM_IRQSTATUS_MPU_OFFSET,
+ .mask = OMAP3_PRM_IRQENABLE_MPU_OFFSET,
+ .nr_regs = 1,
+ .irqs = omap3_prcm_irqs,
+ .nr_irqs = ARRAY_SIZE(omap3_prcm_irqs),
+ .irq = 11 + OMAP_INTC_START,
+ .read_pending_irqs = &omap3xxx_prm_read_pending_irqs,
+ .ocp_barrier = &omap3xxx_prm_ocp_barrier,
+ .save_and_clear_irqen = &omap3xxx_prm_save_and_clear_irqen,
+ .restore_irqen = &omap3xxx_prm_restore_irqen,
+};
+
+/*
+ * omap3_prm_reset_src_map - map from bits in the PRM_RSTST hardware
+ * register (which are specific to OMAP3xxx SoCs) to reset source ID
+ * bit shifts (which is an OMAP SoC-independent enumeration)
+ */
+static struct prm_reset_src_map omap3xxx_prm_reset_src_map[] = {
+ { OMAP3430_GLOBAL_COLD_RST_SHIFT, OMAP_GLOBAL_COLD_RST_SRC_ID_SHIFT },
+ { OMAP3430_GLOBAL_SW_RST_SHIFT, OMAP_GLOBAL_WARM_RST_SRC_ID_SHIFT },
+ { OMAP3430_SECURITY_VIOL_RST_SHIFT, OMAP_SECU_VIOL_RST_SRC_ID_SHIFT },
+ { OMAP3430_MPU_WD_RST_SHIFT, OMAP_MPU_WD_RST_SRC_ID_SHIFT },
+ { OMAP3430_SECURE_WD_RST_SHIFT, OMAP_MPU_WD_RST_SRC_ID_SHIFT },
+ { OMAP3430_EXTERNAL_WARM_RST_SHIFT, OMAP_EXTWARM_RST_SRC_ID_SHIFT },
+ { OMAP3430_VDD1_VOLTAGE_MANAGER_RST_SHIFT,
+ OMAP_VDD_MPU_VM_RST_SRC_ID_SHIFT },
+ { OMAP3430_VDD2_VOLTAGE_MANAGER_RST_SHIFT,
+ OMAP_VDD_CORE_VM_RST_SRC_ID_SHIFT },
+ { OMAP3430_ICEPICK_RST_SHIFT, OMAP_ICEPICK_RST_SRC_ID_SHIFT },
+ { OMAP3430_ICECRUSHER_RST_SHIFT, OMAP_ICECRUSHER_RST_SRC_ID_SHIFT },
+ { -1, -1 },
+};
+
+/* PRM VP */
+
+/*
+ * struct omap3_vp - OMAP3 VP register access description.
+ * @tranxdone_status: VP_TRANXDONE_ST bitmask in PRM_IRQSTATUS_MPU reg
+ */
+struct omap3_vp {
+ u32 tranxdone_status;
+};
+
+static struct omap3_vp omap3_vp[] = {
+ [OMAP3_VP_VDD_MPU_ID] = {
+ .tranxdone_status = OMAP3430_VP1_TRANXDONE_ST_MASK,
+ },
+ [OMAP3_VP_VDD_CORE_ID] = {
+ .tranxdone_status = OMAP3430_VP2_TRANXDONE_ST_MASK,
+ },
+};
+
+#define MAX_VP_ID ARRAY_SIZE(omap3_vp);
+
+u32 omap3_prm_vp_check_txdone(u8 vp_id)
+{
+ struct omap3_vp *vp = &omap3_vp[vp_id];
+ u32 irqstatus;
+
+ irqstatus = omap2_prm_read_mod_reg(OCP_MOD,
+ OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+ return irqstatus & vp->tranxdone_status;
+}
+
+void omap3_prm_vp_clear_txdone(u8 vp_id)
+{
+ struct omap3_vp *vp = &omap3_vp[vp_id];
+
+ omap2_prm_write_mod_reg(vp->tranxdone_status,
+ OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+}
+
+u32 omap3_prm_vcvp_read(u8 offset)
+{
+ return omap2_prm_read_mod_reg(OMAP3430_GR_MOD, offset);
+}
+
+void omap3_prm_vcvp_write(u32 val, u8 offset)
+{
+ omap2_prm_write_mod_reg(val, OMAP3430_GR_MOD, offset);
+}
+
+u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset)
+{
+ return omap2_prm_rmw_mod_reg_bits(mask, bits, OMAP3430_GR_MOD, offset);
+}
+
+/**
+ * omap3xxx_prm_dpll3_reset - use DPLL3 reset to reboot the OMAP SoC
+ *
+ * Set the DPLL3 reset bit, which should reboot the SoC. This is the
+ * recommended way to restart the SoC, considering Errata i520. No
+ * return value.
+ */
+void omap3xxx_prm_dpll3_reset(void)
+{
+ omap2_prm_set_mod_reg_bits(OMAP_RST_DPLL3_MASK, OMAP3430_GR_MOD,
+ OMAP2_RM_RSTCTRL);
+ /* OCP barrier */
+ omap2_prm_read_mod_reg(OMAP3430_GR_MOD, OMAP2_RM_RSTCTRL);
+}
+
+/**
+ * omap3xxx_prm_read_pending_irqs - read pending PRM MPU IRQs into @events
+ * @events: ptr to a u32, preallocated by caller
+ *
+ * Read PRM_IRQSTATUS_MPU bits, AND'ed with the currently-enabled PRM
+ * MPU IRQs, and store the result into the u32 pointed to by @events.
+ * No return value.
+ */
+void omap3xxx_prm_read_pending_irqs(unsigned long *events)
+{
+ u32 mask, st;
+
+ /* XXX Can the mask read be avoided (e.g., can it come from RAM?) */
+ mask = omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET);
+ st = omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+
+ events[0] = mask & st;
+}
+
+/**
+ * omap3xxx_prm_ocp_barrier - force buffered MPU writes to the PRM to complete
+ *
+ * Force any buffered writes to the PRM IP block to complete. Needed
+ * by the PRM IRQ handler, which reads and writes directly to the IP
+ * block, to avoid race conditions after acknowledging or clearing IRQ
+ * bits. No return value.
+ */
+void omap3xxx_prm_ocp_barrier(void)
+{
+ omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_REVISION_OFFSET);
+}
+
+/**
+ * omap3xxx_prm_save_and_clear_irqen - save/clear PRM_IRQENABLE_MPU reg
+ * @saved_mask: ptr to a u32 array to save IRQENABLE bits
+ *
+ * Save the PRM_IRQENABLE_MPU register to @saved_mask. @saved_mask
+ * must be allocated by the caller. Intended to be used in the PRM
+ * interrupt handler suspend callback. The OCP barrier is needed to
+ * ensure the write to disable PRM interrupts reaches the PRM before
+ * returning; otherwise, spurious interrupts might occur. No return
+ * value.
+ */
+void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask)
+{
+ saved_mask[0] = omap2_prm_read_mod_reg(OCP_MOD,
+ OMAP3_PRM_IRQENABLE_MPU_OFFSET);
+ omap2_prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET);
+
+ /* OCP barrier */
+ omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_REVISION_OFFSET);
+}
+
+/**
+ * omap3xxx_prm_restore_irqen - set PRM_IRQENABLE_MPU register from args
+ * @saved_mask: ptr to a u32 array of IRQENABLE bits saved previously
+ *
+ * Restore the PRM_IRQENABLE_MPU register from @saved_mask. Intended
+ * to be used in the PRM interrupt handler resume callback to restore
+ * values saved by omap3xxx_prm_save_and_clear_irqen(). No OCP
+ * barrier should be needed here; any pending PRM interrupts will fire
+ * once the writes reach the PRM. No return value.
+ */
+void omap3xxx_prm_restore_irqen(u32 *saved_mask)
+{
+ omap2_prm_write_mod_reg(saved_mask[0], OCP_MOD,
+ OMAP3_PRM_IRQENABLE_MPU_OFFSET);
+}
+
+/**
+ * omap3xxx_prm_reconfigure_io_chain - clear latches and reconfigure I/O chain
+ *
+ * Clear any previously-latched I/O wakeup events and ensure that the
+ * I/O wakeup gates are aligned with the current mux settings. Works
+ * by asserting WUCLKIN, waiting for WUCLKOUT to be asserted, and then
+ * deasserting WUCLKIN and clearing the ST_IO_CHAIN WKST bit. No
+ * return value.
+ */
+void omap3xxx_prm_reconfigure_io_chain(void)
+{
+ int i = 0;
+
+ omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
+ PM_WKEN);
+
+ omap_test_timeout(omap2_prm_read_mod_reg(WKUP_MOD, PM_WKST) &
+ OMAP3430_ST_IO_CHAIN_MASK,
+ MAX_IOPAD_LATCH_TIME, i);
+ if (i == MAX_IOPAD_LATCH_TIME)
+ pr_warn("PRM: I/O chain clock line assertion timed out\n");
+
+ omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
+ PM_WKEN);
+
+ omap2_prm_set_mod_reg_bits(OMAP3430_ST_IO_CHAIN_MASK, WKUP_MOD,
+ PM_WKST);
+
+ omap2_prm_read_mod_reg(WKUP_MOD, PM_WKST);
+}
+
+/**
+ * omap3xxx_prm_enable_io_wakeup - enable wakeup events from I/O wakeup latches
+ *
+ * Activates the I/O wakeup event latches and allows events logged by
+ * those latches to signal a wakeup event to the PRCM. For I/O
+ * wakeups to occur, WAKEUPENABLE bits must be set in the pad mux
+ * registers, and omap3xxx_prm_reconfigure_io_chain() must be called.
+ * No return value.
+ */
+static void __init omap3xxx_prm_enable_io_wakeup(void)
+{
+ if (omap3_has_io_wakeup())
+ omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD,
+ PM_WKEN);
+}
+
+/**
+ * omap3xxx_prm_read_reset_sources - return the last SoC reset source
+ *
+ * Return a u32 representing the last reset sources of the SoC. The
+ * returned reset source bits are standardized across OMAP SoCs.
+ */
+static u32 omap3xxx_prm_read_reset_sources(void)
+{
+ struct prm_reset_src_map *p;
+ u32 r = 0;
+ u32 v;
+
+ v = omap2_prm_read_mod_reg(WKUP_MOD, OMAP2_RM_RSTST);
+
+ p = omap3xxx_prm_reset_src_map;
+ while (p->reg_shift >= 0 && p->std_shift >= 0) {
+ if (v & (1 << p->reg_shift))
+ r |= 1 << p->std_shift;
+ p++;
+ }
+
+ return r;
+}
+
+/* Powerdomain low-level functions */
+
+/* Applicable only for OMAP3. Not supported on OMAP2 */
+static int omap3_pwrdm_read_prev_pwrst(struct powerdomain *pwrdm)
+{
+ return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
+ OMAP3430_PM_PREPWSTST,
+ OMAP3430_LASTPOWERSTATEENTERED_MASK);
+}
+
+static int omap3_pwrdm_read_logic_pwrst(struct powerdomain *pwrdm)
+{
+ return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
+ OMAP2_PM_PWSTST,
+ OMAP3430_LOGICSTATEST_MASK);
+}
+
+static int omap3_pwrdm_read_logic_retst(struct powerdomain *pwrdm)
+{
+ return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
+ OMAP2_PM_PWSTCTRL,
+ OMAP3430_LOGICSTATEST_MASK);
+}
+
+static int omap3_pwrdm_read_prev_logic_pwrst(struct powerdomain *pwrdm)
+{
+ return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
+ OMAP3430_PM_PREPWSTST,
+ OMAP3430_LASTLOGICSTATEENTERED_MASK);
+}
+
+static int omap3_get_mem_bank_lastmemst_mask(u8 bank)
+{
+ switch (bank) {
+ case 0:
+ return OMAP3430_LASTMEM1STATEENTERED_MASK;
+ case 1:
+ return OMAP3430_LASTMEM2STATEENTERED_MASK;
+ case 2:
+ return OMAP3430_LASTSHAREDL2CACHEFLATSTATEENTERED_MASK;
+ case 3:
+ return OMAP3430_LASTL2FLATMEMSTATEENTERED_MASK;
+ default:
+ WARN_ON(1); /* should never happen */
+ return -EEXIST;
+ }
+ return 0;
+}
+
+static int omap3_pwrdm_read_prev_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
+{
+ u32 m;
+
+ m = omap3_get_mem_bank_lastmemst_mask(bank);
+
+ return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
+ OMAP3430_PM_PREPWSTST, m);
+}
+
+static int omap3_pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm)
+{
+ omap2_prm_write_mod_reg(0, pwrdm->prcm_offs, OMAP3430_PM_PREPWSTST);
+ return 0;
+}
+
+static int omap3_pwrdm_enable_hdwr_sar(struct powerdomain *pwrdm)
+{
+ return omap2_prm_rmw_mod_reg_bits(0,
+ 1 << OMAP3430ES2_SAVEANDRESTORE_SHIFT,
+ pwrdm->prcm_offs, OMAP2_PM_PWSTCTRL);
+}
+
+static int omap3_pwrdm_disable_hdwr_sar(struct powerdomain *pwrdm)
+{
+ return omap2_prm_rmw_mod_reg_bits(1 << OMAP3430ES2_SAVEANDRESTORE_SHIFT,
+ 0, pwrdm->prcm_offs,
+ OMAP2_PM_PWSTCTRL);
+}
+
+struct pwrdm_ops omap3_pwrdm_operations = {
+ .pwrdm_set_next_pwrst = omap2_pwrdm_set_next_pwrst,
+ .pwrdm_read_next_pwrst = omap2_pwrdm_read_next_pwrst,
+ .pwrdm_read_pwrst = omap2_pwrdm_read_pwrst,
+ .pwrdm_read_prev_pwrst = omap3_pwrdm_read_prev_pwrst,
+ .pwrdm_set_logic_retst = omap2_pwrdm_set_logic_retst,
+ .pwrdm_read_logic_pwrst = omap3_pwrdm_read_logic_pwrst,
+ .pwrdm_read_logic_retst = omap3_pwrdm_read_logic_retst,
+ .pwrdm_read_prev_logic_pwrst = omap3_pwrdm_read_prev_logic_pwrst,
+ .pwrdm_set_mem_onst = omap2_pwrdm_set_mem_onst,
+ .pwrdm_set_mem_retst = omap2_pwrdm_set_mem_retst,
+ .pwrdm_read_mem_pwrst = omap2_pwrdm_read_mem_pwrst,
+ .pwrdm_read_mem_retst = omap2_pwrdm_read_mem_retst,
+ .pwrdm_read_prev_mem_pwrst = omap3_pwrdm_read_prev_mem_pwrst,
+ .pwrdm_clear_all_prev_pwrst = omap3_pwrdm_clear_all_prev_pwrst,
+ .pwrdm_enable_hdwr_sar = omap3_pwrdm_enable_hdwr_sar,
+ .pwrdm_disable_hdwr_sar = omap3_pwrdm_disable_hdwr_sar,
+ .pwrdm_wait_transition = omap2_pwrdm_wait_transition,
+};
+
+/*
+ *
+ */
+
+static struct prm_ll_data omap3xxx_prm_ll_data = {
+ .read_reset_sources = &omap3xxx_prm_read_reset_sources,
+};
+
+static int __init omap3xxx_prm_init(void)
+{
+ int ret;
+
+ if (!cpu_is_omap34xx())
+ return 0;
+
+ ret = prm_register(&omap3xxx_prm_ll_data);
+ if (ret)
+ return ret;
+
+ omap3xxx_prm_enable_io_wakeup();
+ ret = omap_prcm_register_chain_handler(&omap3_prcm_irq_setup);
+ if (!ret)
+ irq_set_status_flags(omap_prcm_event_to_irq("io"),
+ IRQ_NOAUTOEN);
+
+
+ return ret;
+}
+subsys_initcall(omap3xxx_prm_init);
+
+static void __exit omap3xxx_prm_exit(void)
+{
+ if (!cpu_is_omap34xx())
+ return;
+
+ /* Should never happen */
+ WARN(prm_unregister(&omap3xxx_prm_ll_data),
+ "%s: prm_ll_data function pointer mismatch\n", __func__);
+}
+__exitcall(omap3xxx_prm_exit);
diff --git a/arch/arm/mach-omap2/prm3xxx.h b/arch/arm/mach-omap2/prm3xxx.h
new file mode 100644
index 0000000..10cd41a
--- /dev/null
+++ b/arch/arm/mach-omap2/prm3xxx.h
@@ -0,0 +1,162 @@
+/*
+ * OMAP3xxx Power/Reset Management (PRM) register definitions
+ *
+ * Copyright (C) 2007-2009, 2011-2012 Texas Instruments, Inc.
+ * Copyright (C) 2008-2010 Nokia Corporation
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * The PRM hardware modules on the OMAP2/3 are quite similar to each
+ * other. The PRM on OMAP4 has a new register layout, and is handled
+ * in a separate file.
+ */
+#ifndef __ARCH_ARM_MACH_OMAP2_PRM3XXX_H
+#define __ARCH_ARM_MACH_OMAP2_PRM3XXX_H
+
+#include "prcm-common.h"
+#include "prm.h"
+#include "prm2xxx_3xxx.h"
+
+#define OMAP34XX_PRM_REGADDR(module, reg) \
+ OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg))
+
+
+/*
+ * OMAP3-specific global PRM registers
+ * Use __raw_{read,write}l() with these registers.
+ *
+ * With a few exceptions, these are the register names beginning with
+ * PRM_* on 34xx. (The exceptions are the IRQSTATUS and IRQENABLE
+ * bits.)
+ */
+
+#define OMAP3_PRM_REVISION_OFFSET 0x0004
+#define OMAP3430_PRM_REVISION OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0004)
+#define OMAP3_PRM_SYSCONFIG_OFFSET 0x0014
+#define OMAP3430_PRM_SYSCONFIG OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0014)
+
+#define OMAP3_PRM_IRQSTATUS_MPU_OFFSET 0x0018
+#define OMAP3430_PRM_IRQSTATUS_MPU OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0018)
+#define OMAP3_PRM_IRQENABLE_MPU_OFFSET 0x001c
+#define OMAP3430_PRM_IRQENABLE_MPU OMAP34XX_PRM_REGADDR(OCP_MOD, 0x001c)
+
+
+#define OMAP3_PRM_VC_SMPS_SA_OFFSET 0x0020
+#define OMAP3430_PRM_VC_SMPS_SA OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0020)
+#define OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET 0x0024
+#define OMAP3430_PRM_VC_SMPS_VOL_RA OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0024)
+#define OMAP3_PRM_VC_SMPS_CMD_RA_OFFSET 0x0028
+#define OMAP3430_PRM_VC_SMPS_CMD_RA OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0028)
+#define OMAP3_PRM_VC_CMD_VAL_0_OFFSET 0x002c
+#define OMAP3430_PRM_VC_CMD_VAL_0 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x002c)
+#define OMAP3_PRM_VC_CMD_VAL_1_OFFSET 0x0030
+#define OMAP3430_PRM_VC_CMD_VAL_1 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0030)
+#define OMAP3_PRM_VC_CH_CONF_OFFSET 0x0034
+#define OMAP3430_PRM_VC_CH_CONF OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0034)
+#define OMAP3_PRM_VC_I2C_CFG_OFFSET 0x0038
+#define OMAP3430_PRM_VC_I2C_CFG OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0038)
+#define OMAP3_PRM_VC_BYPASS_VAL_OFFSET 0x003c
+#define OMAP3430_PRM_VC_BYPASS_VAL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x003c)
+#define OMAP3_PRM_RSTCTRL_OFFSET 0x0050
+#define OMAP3430_PRM_RSTCTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0050)
+#define OMAP3_PRM_RSTTIME_OFFSET 0x0054
+#define OMAP3430_PRM_RSTTIME OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0054)
+#define OMAP3_PRM_RSTST_OFFSET 0x0058
+#define OMAP3430_PRM_RSTST OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0058)
+#define OMAP3_PRM_VOLTCTRL_OFFSET 0x0060
+#define OMAP3430_PRM_VOLTCTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0060)
+#define OMAP3_PRM_SRAM_PCHARGE_OFFSET 0x0064
+#define OMAP3430_PRM_SRAM_PCHARGE OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0064)
+#define OMAP3_PRM_CLKSRC_CTRL_OFFSET 0x0070
+#define OMAP3430_PRM_CLKSRC_CTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0070)
+#define OMAP3_PRM_VOLTSETUP1_OFFSET 0x0090
+#define OMAP3430_PRM_VOLTSETUP1 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0090)
+#define OMAP3_PRM_VOLTOFFSET_OFFSET 0x0094
+#define OMAP3430_PRM_VOLTOFFSET OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0094)
+#define OMAP3_PRM_CLKSETUP_OFFSET 0x0098
+#define OMAP3430_PRM_CLKSETUP OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0098)
+#define OMAP3_PRM_POLCTRL_OFFSET 0x009c
+#define OMAP3430_PRM_POLCTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x009c)
+#define OMAP3_PRM_VOLTSETUP2_OFFSET 0x00a0
+#define OMAP3430_PRM_VOLTSETUP2 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00a0)
+#define OMAP3_PRM_VP1_CONFIG_OFFSET 0x00b0
+#define OMAP3430_PRM_VP1_CONFIG OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b0)
+#define OMAP3_PRM_VP1_VSTEPMIN_OFFSET 0x00b4
+#define OMAP3430_PRM_VP1_VSTEPMIN OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b4)
+#define OMAP3_PRM_VP1_VSTEPMAX_OFFSET 0x00b8
+#define OMAP3430_PRM_VP1_VSTEPMAX OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b8)
+#define OMAP3_PRM_VP1_VLIMITTO_OFFSET 0x00bc
+#define OMAP3430_PRM_VP1_VLIMITTO OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00bc)
+#define OMAP3_PRM_VP1_VOLTAGE_OFFSET 0x00c0
+#define OMAP3430_PRM_VP1_VOLTAGE OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c0)
+#define OMAP3_PRM_VP1_STATUS_OFFSET 0x00c4
+#define OMAP3430_PRM_VP1_STATUS OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c4)
+#define OMAP3_PRM_VP2_CONFIG_OFFSET 0x00d0
+#define OMAP3430_PRM_VP2_CONFIG OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d0)
+#define OMAP3_PRM_VP2_VSTEPMIN_OFFSET 0x00d4
+#define OMAP3430_PRM_VP2_VSTEPMIN OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d4)
+#define OMAP3_PRM_VP2_VSTEPMAX_OFFSET 0x00d8
+#define OMAP3430_PRM_VP2_VSTEPMAX OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d8)
+#define OMAP3_PRM_VP2_VLIMITTO_OFFSET 0x00dc
+#define OMAP3430_PRM_VP2_VLIMITTO OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00dc)
+#define OMAP3_PRM_VP2_VOLTAGE_OFFSET 0x00e0
+#define OMAP3430_PRM_VP2_VOLTAGE OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e0)
+#define OMAP3_PRM_VP2_STATUS_OFFSET 0x00e4
+#define OMAP3430_PRM_VP2_STATUS OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e4)
+
+#define OMAP3_PRM_CLKSEL_OFFSET 0x0040
+#define OMAP3430_PRM_CLKSEL OMAP34XX_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0040)
+#define OMAP3_PRM_CLKOUT_CTRL_OFFSET 0x0070
+#define OMAP3430_PRM_CLKOUT_CTRL OMAP34XX_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0070)
+
+/* OMAP3 specific register offsets */
+#define OMAP3430ES2_PM_WKEN3 0x00f0
+#define OMAP3430ES2_PM_WKST3 0x00b8
+
+#define OMAP3430_PM_MPUGRPSEL 0x00a4
+#define OMAP3430_PM_MPUGRPSEL1 OMAP3430_PM_MPUGRPSEL
+#define OMAP3430ES2_PM_MPUGRPSEL3 0x00f8
+
+#define OMAP3430_PM_IVAGRPSEL 0x00a8
+#define OMAP3430_PM_IVAGRPSEL1 OMAP3430_PM_IVAGRPSEL
+#define OMAP3430ES2_PM_IVAGRPSEL3 0x00f4
+
+#define OMAP3430_PM_PREPWSTST 0x00e8
+
+#define OMAP3430_PRM_IRQSTATUS_IVA2 0x00f8
+#define OMAP3430_PRM_IRQENABLE_IVA2 0x00fc
+
+
+#ifndef __ASSEMBLER__
+
+/* OMAP3-specific VP functions */
+u32 omap3_prm_vp_check_txdone(u8 vp_id);
+void omap3_prm_vp_clear_txdone(u8 vp_id);
+
+/*
+ * OMAP3 access functions for voltage controller (VC) and
+ * voltage proccessor (VP) in the PRM.
+ */
+extern u32 omap3_prm_vcvp_read(u8 offset);
+extern void omap3_prm_vcvp_write(u32 val, u8 offset);
+extern u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset);
+
+extern void omap3xxx_prm_reconfigure_io_chain(void);
+
+/* PRM interrupt-related functions */
+extern void omap3xxx_prm_read_pending_irqs(unsigned long *events);
+extern void omap3xxx_prm_ocp_barrier(void);
+extern void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask);
+extern void omap3xxx_prm_restore_irqen(u32 *saved_mask);
+
+extern void omap3xxx_prm_dpll3_reset(void);
+
+extern u32 omap3xxx_prm_get_reset_sources(void);
+
+#endif /* __ASSEMBLER */
+
+
+#endif
diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c
index f0c4d5f..6d3467a 100644
--- a/arch/arm/mach-omap2/prm44xx.c
+++ b/arch/arm/mach-omap2/prm44xx.c
@@ -1,10 +1,11 @@
/*
* OMAP4 PRM module functions
*
- * Copyright (C) 2011 Texas Instruments, Inc.
+ * Copyright (C) 2011-2012 Texas Instruments, Inc.
* Copyright (C) 2010 Nokia Corporation
* Benoît Cousson
* Paul Walmsley
+ * Rajendra Nayak <rnayak@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -17,7 +18,6 @@
#include <linux/err.h>
#include <linux/io.h>
-#include <plat/prcm.h>
#include "soc.h"
#include "iomap.h"
@@ -27,6 +27,9 @@
#include "prm-regbits-44xx.h"
#include "prcm44xx.h"
#include "prminst44xx.h"
+#include "powerdomain.h"
+
+/* Static data */
static const struct omap_prcm_irq omap4_prcm_irqs[] = {
OMAP_PRCM_IRQ("wkup", 0, 0),
@@ -46,6 +49,33 @@
.restore_irqen = &omap44xx_prm_restore_irqen,
};
+/*
+ * omap44xx_prm_reset_src_map - map from bits in the PRM_RSTST
+ * hardware register (which are specific to OMAP44xx SoCs) to reset
+ * source ID bit shifts (which is an OMAP SoC-independent
+ * enumeration)
+ */
+static struct prm_reset_src_map omap44xx_prm_reset_src_map[] = {
+ { OMAP4430_RST_GLOBAL_WARM_SW_SHIFT,
+ OMAP_GLOBAL_WARM_RST_SRC_ID_SHIFT },
+ { OMAP4430_RST_GLOBAL_COLD_SW_SHIFT,
+ OMAP_GLOBAL_COLD_RST_SRC_ID_SHIFT },
+ { OMAP4430_MPU_SECURITY_VIOL_RST_SHIFT,
+ OMAP_SECU_VIOL_RST_SRC_ID_SHIFT },
+ { OMAP4430_MPU_WDT_RST_SHIFT, OMAP_MPU_WD_RST_SRC_ID_SHIFT },
+ { OMAP4430_SECURE_WDT_RST_SHIFT, OMAP_SECU_WD_RST_SRC_ID_SHIFT },
+ { OMAP4430_EXTERNAL_WARM_RST_SHIFT, OMAP_EXTWARM_RST_SRC_ID_SHIFT },
+ { OMAP4430_VDD_MPU_VOLT_MGR_RST_SHIFT,
+ OMAP_VDD_MPU_VM_RST_SRC_ID_SHIFT },
+ { OMAP4430_VDD_IVA_VOLT_MGR_RST_SHIFT,
+ OMAP_VDD_IVA_VM_RST_SRC_ID_SHIFT },
+ { OMAP4430_VDD_CORE_VOLT_MGR_RST_SHIFT,
+ OMAP_VDD_CORE_VM_RST_SRC_ID_SHIFT },
+ { OMAP4430_ICEPICK_RST_SHIFT, OMAP_ICEPICK_RST_SRC_ID_SHIFT },
+ { OMAP4430_C2C_RST_SHIFT, OMAP_C2C_RST_SRC_ID_SHIFT },
+ { -1, -1 },
+};
+
/* PRM low-level functions */
/* Read a register in a CM/PRM instance in the PRM module */
@@ -291,12 +321,324 @@
OMAP4_PRM_IO_PMCTRL_OFFSET);
}
-static int __init omap4xxx_prcm_init(void)
+/**
+ * omap44xx_prm_read_reset_sources - return the last SoC reset source
+ *
+ * Return a u32 representing the last reset sources of the SoC. The
+ * returned reset source bits are standardized across OMAP SoCs.
+ */
+static u32 omap44xx_prm_read_reset_sources(void)
{
- if (cpu_is_omap44xx()) {
- omap44xx_prm_enable_io_wakeup();
- return omap_prcm_register_chain_handler(&omap4_prcm_irq_setup);
+ struct prm_reset_src_map *p;
+ u32 r = 0;
+ u32 v;
+
+ v = omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST,
+ OMAP4_RM_RSTST);
+
+ p = omap44xx_prm_reset_src_map;
+ while (p->reg_shift >= 0 && p->std_shift >= 0) {
+ if (v & (1 << p->reg_shift))
+ r |= 1 << p->std_shift;
+ p++;
}
+
+ return r;
+}
+
+/* Powerdomain low-level functions */
+
+static int omap4_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
+{
+ omap4_prminst_rmw_inst_reg_bits(OMAP_POWERSTATE_MASK,
+ (pwrst << OMAP_POWERSTATE_SHIFT),
+ pwrdm->prcm_partition,
+ pwrdm->prcm_offs, OMAP4_PM_PWSTCTRL);
return 0;
}
-subsys_initcall(omap4xxx_prcm_init);
+
+static int omap4_pwrdm_read_next_pwrst(struct powerdomain *pwrdm)
+{
+ u32 v;
+
+ v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
+ OMAP4_PM_PWSTCTRL);
+ v &= OMAP_POWERSTATE_MASK;
+ v >>= OMAP_POWERSTATE_SHIFT;
+
+ return v;
+}
+
+static int omap4_pwrdm_read_pwrst(struct powerdomain *pwrdm)
+{
+ u32 v;
+
+ v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
+ OMAP4_PM_PWSTST);
+ v &= OMAP_POWERSTATEST_MASK;
+ v >>= OMAP_POWERSTATEST_SHIFT;
+
+ return v;
+}
+
+static int omap4_pwrdm_read_prev_pwrst(struct powerdomain *pwrdm)
+{
+ u32 v;
+
+ v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
+ OMAP4_PM_PWSTST);
+ v &= OMAP4430_LASTPOWERSTATEENTERED_MASK;
+ v >>= OMAP4430_LASTPOWERSTATEENTERED_SHIFT;
+
+ return v;
+}
+
+static int omap4_pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm)
+{
+ omap4_prminst_rmw_inst_reg_bits(OMAP4430_LOWPOWERSTATECHANGE_MASK,
+ (1 << OMAP4430_LOWPOWERSTATECHANGE_SHIFT),
+ pwrdm->prcm_partition,
+ pwrdm->prcm_offs, OMAP4_PM_PWSTCTRL);
+ return 0;
+}
+
+static int omap4_pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm)
+{
+ omap4_prminst_rmw_inst_reg_bits(OMAP4430_LASTPOWERSTATEENTERED_MASK,
+ OMAP4430_LASTPOWERSTATEENTERED_MASK,
+ pwrdm->prcm_partition,
+ pwrdm->prcm_offs, OMAP4_PM_PWSTST);
+ return 0;
+}
+
+static int omap4_pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst)
+{
+ u32 v;
+
+ v = pwrst << __ffs(OMAP4430_LOGICRETSTATE_MASK);
+ omap4_prminst_rmw_inst_reg_bits(OMAP4430_LOGICRETSTATE_MASK, v,
+ pwrdm->prcm_partition, pwrdm->prcm_offs,
+ OMAP4_PM_PWSTCTRL);
+
+ return 0;
+}
+
+static int omap4_pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank,
+ u8 pwrst)
+{
+ u32 m;
+
+ m = omap2_pwrdm_get_mem_bank_onstate_mask(bank);
+
+ omap4_prminst_rmw_inst_reg_bits(m, (pwrst << __ffs(m)),
+ pwrdm->prcm_partition, pwrdm->prcm_offs,
+ OMAP4_PM_PWSTCTRL);
+
+ return 0;
+}
+
+static int omap4_pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank,
+ u8 pwrst)
+{
+ u32 m;
+
+ m = omap2_pwrdm_get_mem_bank_retst_mask(bank);
+
+ omap4_prminst_rmw_inst_reg_bits(m, (pwrst << __ffs(m)),
+ pwrdm->prcm_partition, pwrdm->prcm_offs,
+ OMAP4_PM_PWSTCTRL);
+
+ return 0;
+}
+
+static int omap4_pwrdm_read_logic_pwrst(struct powerdomain *pwrdm)
+{
+ u32 v;
+
+ v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
+ OMAP4_PM_PWSTST);
+ v &= OMAP4430_LOGICSTATEST_MASK;
+ v >>= OMAP4430_LOGICSTATEST_SHIFT;
+
+ return v;
+}
+
+static int omap4_pwrdm_read_logic_retst(struct powerdomain *pwrdm)
+{
+ u32 v;
+
+ v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
+ OMAP4_PM_PWSTCTRL);
+ v &= OMAP4430_LOGICRETSTATE_MASK;
+ v >>= OMAP4430_LOGICRETSTATE_SHIFT;
+
+ return v;
+}
+
+/**
+ * omap4_pwrdm_read_prev_logic_pwrst - read the previous logic powerstate
+ * @pwrdm: struct powerdomain * to read the state for
+ *
+ * Reads the previous logic powerstate for a powerdomain. This
+ * function must determine the previous logic powerstate by first
+ * checking the previous powerstate for the domain. If that was OFF,
+ * then logic has been lost. If previous state was RETENTION, the
+ * function reads the setting for the next retention logic state to
+ * see the actual value. In every other case, the logic is
+ * retained. Returns either PWRDM_POWER_OFF or PWRDM_POWER_RET
+ * depending whether the logic was retained or not.
+ */
+static int omap4_pwrdm_read_prev_logic_pwrst(struct powerdomain *pwrdm)
+{
+ int state;
+
+ state = omap4_pwrdm_read_prev_pwrst(pwrdm);
+
+ if (state == PWRDM_POWER_OFF)
+ return PWRDM_POWER_OFF;
+
+ if (state != PWRDM_POWER_RET)
+ return PWRDM_POWER_RET;
+
+ return omap4_pwrdm_read_logic_retst(pwrdm);
+}
+
+static int omap4_pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
+{
+ u32 m, v;
+
+ m = omap2_pwrdm_get_mem_bank_stst_mask(bank);
+
+ v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
+ OMAP4_PM_PWSTST);
+ v &= m;
+ v >>= __ffs(m);
+
+ return v;
+}
+
+static int omap4_pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank)
+{
+ u32 m, v;
+
+ m = omap2_pwrdm_get_mem_bank_retst_mask(bank);
+
+ v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
+ OMAP4_PM_PWSTCTRL);
+ v &= m;
+ v >>= __ffs(m);
+
+ return v;
+}
+
+/**
+ * omap4_pwrdm_read_prev_mem_pwrst - reads the previous memory powerstate
+ * @pwrdm: struct powerdomain * to read mem powerstate for
+ * @bank: memory bank index
+ *
+ * Reads the previous memory powerstate for a powerdomain. This
+ * function must determine the previous memory powerstate by first
+ * checking the previous powerstate for the domain. If that was OFF,
+ * then logic has been lost. If previous state was RETENTION, the
+ * function reads the setting for the next memory retention state to
+ * see the actual value. In every other case, the logic is
+ * retained. Returns either PWRDM_POWER_OFF or PWRDM_POWER_RET
+ * depending whether logic was retained or not.
+ */
+static int omap4_pwrdm_read_prev_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
+{
+ int state;
+
+ state = omap4_pwrdm_read_prev_pwrst(pwrdm);
+
+ if (state == PWRDM_POWER_OFF)
+ return PWRDM_POWER_OFF;
+
+ if (state != PWRDM_POWER_RET)
+ return PWRDM_POWER_RET;
+
+ return omap4_pwrdm_read_mem_retst(pwrdm, bank);
+}
+
+static int omap4_pwrdm_wait_transition(struct powerdomain *pwrdm)
+{
+ u32 c = 0;
+
+ /*
+ * REVISIT: pwrdm_wait_transition() may be better implemented
+ * via a callback and a periodic timer check -- how long do we expect
+ * powerdomain transitions to take?
+ */
+
+ /* XXX Is this udelay() value meaningful? */
+ while ((omap4_prminst_read_inst_reg(pwrdm->prcm_partition,
+ pwrdm->prcm_offs,
+ OMAP4_PM_PWSTST) &
+ OMAP_INTRANSITION_MASK) &&
+ (c++ < PWRDM_TRANSITION_BAILOUT))
+ udelay(1);
+
+ if (c > PWRDM_TRANSITION_BAILOUT) {
+ pr_err("powerdomain: %s: waited too long to complete transition\n",
+ pwrdm->name);
+ return -EAGAIN;
+ }
+
+ pr_debug("powerdomain: completed transition in %d loops\n", c);
+
+ return 0;
+}
+
+struct pwrdm_ops omap4_pwrdm_operations = {
+ .pwrdm_set_next_pwrst = omap4_pwrdm_set_next_pwrst,
+ .pwrdm_read_next_pwrst = omap4_pwrdm_read_next_pwrst,
+ .pwrdm_read_pwrst = omap4_pwrdm_read_pwrst,
+ .pwrdm_read_prev_pwrst = omap4_pwrdm_read_prev_pwrst,
+ .pwrdm_set_lowpwrstchange = omap4_pwrdm_set_lowpwrstchange,
+ .pwrdm_clear_all_prev_pwrst = omap4_pwrdm_clear_all_prev_pwrst,
+ .pwrdm_set_logic_retst = omap4_pwrdm_set_logic_retst,
+ .pwrdm_read_logic_pwrst = omap4_pwrdm_read_logic_pwrst,
+ .pwrdm_read_prev_logic_pwrst = omap4_pwrdm_read_prev_logic_pwrst,
+ .pwrdm_read_logic_retst = omap4_pwrdm_read_logic_retst,
+ .pwrdm_read_mem_pwrst = omap4_pwrdm_read_mem_pwrst,
+ .pwrdm_read_mem_retst = omap4_pwrdm_read_mem_retst,
+ .pwrdm_read_prev_mem_pwrst = omap4_pwrdm_read_prev_mem_pwrst,
+ .pwrdm_set_mem_onst = omap4_pwrdm_set_mem_onst,
+ .pwrdm_set_mem_retst = omap4_pwrdm_set_mem_retst,
+ .pwrdm_wait_transition = omap4_pwrdm_wait_transition,
+};
+
+/*
+ * XXX document
+ */
+static struct prm_ll_data omap44xx_prm_ll_data = {
+ .read_reset_sources = &omap44xx_prm_read_reset_sources,
+};
+
+static int __init omap44xx_prm_init(void)
+{
+ int ret;
+
+ if (!cpu_is_omap44xx())
+ return 0;
+
+ ret = prm_register(&omap44xx_prm_ll_data);
+ if (ret)
+ return ret;
+
+ omap44xx_prm_enable_io_wakeup();
+
+ return omap_prcm_register_chain_handler(&omap4_prcm_irq_setup);
+}
+subsys_initcall(omap44xx_prm_init);
+
+static void __exit omap44xx_prm_exit(void)
+{
+ if (!cpu_is_omap44xx())
+ return;
+
+ /* Should never happen */
+ WARN(prm_unregister(&omap44xx_prm_ll_data),
+ "%s: prm_ll_data function pointer mismatch\n", __func__);
+}
+__exitcall(omap44xx_prm_exit);
diff --git a/arch/arm/mach-omap2/prm44xx.h b/arch/arm/mach-omap2/prm44xx.h
index ee72ae6..c8e1acc 100644
--- a/arch/arm/mach-omap2/prm44xx.h
+++ b/arch/arm/mach-omap2/prm44xx.h
@@ -771,6 +771,8 @@
extern void omap44xx_prm_save_and_clear_irqen(u32 *saved_mask);
extern void omap44xx_prm_restore_irqen(u32 *saved_mask);
+extern u32 omap44xx_prm_get_reset_sources(void);
+
# endif
#endif
diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
index 6b4d332..f596e1e 100644
--- a/arch/arm/mach-omap2/prm_common.c
+++ b/arch/arm/mach-omap2/prm_common.c
@@ -24,11 +24,11 @@
#include <linux/interrupt.h>
#include <linux/slab.h>
-#include <plat/common.h>
-#include <plat/prcm.h>
-
#include "prm2xxx_3xxx.h"
+#include "prm2xxx.h"
+#include "prm3xxx.h"
#include "prm44xx.h"
+#include "common.h"
/*
* OMAP_PRCM_MAX_NR_PENDING_REG: maximum number of PRM_IRQ*_MPU regs
@@ -53,6 +53,16 @@
*/
static struct omap_prcm_irq_setup *prcm_irq_setup;
+/* prm_base: base virtual address of the PRM IP block */
+void __iomem *prm_base;
+
+/*
+ * prm_ll_data: function pointers to SoC-specific implementations of
+ * common PRM functions
+ */
+static struct prm_ll_data null_prm_ll_data;
+static struct prm_ll_data *prm_ll_data = &null_prm_ll_data;
+
/* Private functions */
/*
@@ -319,64 +329,82 @@
return -ENOMEM;
}
-/*
- * Stubbed functions so that common files continue to build when
- * custom builds are used
- * XXX These are temporary and should be removed at the earliest possible
- * opportunity
+/**
+ * omap2_set_globals_prm - set the PRM base address (for early use)
+ * @prm: PRM base virtual address
+ *
+ * XXX Will be replaced when the PRM/CM drivers are completed.
*/
-u32 __weak omap2_prm_read_mod_reg(s16 module, u16 idx)
+void __init omap2_set_globals_prm(void __iomem *prm)
{
- WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
+ prm_base = prm;
+}
+
+/**
+ * prm_read_reset_sources - return the sources of the SoC's last reset
+ *
+ * Return a u32 bitmask representing the reset sources that caused the
+ * SoC to reset. The low-level per-SoC functions called by this
+ * function remap the SoC-specific reset source bits into an
+ * OMAP-common set of reset source bits, defined in
+ * arch/arm/mach-omap2/prm.h. Returns the standardized reset source
+ * u32 bitmask from the hardware upon success, or returns (1 <<
+ * OMAP_UNKNOWN_RST_SRC_ID_SHIFT) if no low-level read_reset_sources()
+ * function was registered.
+ */
+u32 prm_read_reset_sources(void)
+{
+ u32 ret = 1 << OMAP_UNKNOWN_RST_SRC_ID_SHIFT;
+
+ if (prm_ll_data->read_reset_sources)
+ ret = prm_ll_data->read_reset_sources();
+ else
+ WARN_ONCE(1, "prm: %s: no mapping function defined for reset sources\n", __func__);
+
+ return ret;
+}
+
+/**
+ * prm_register - register per-SoC low-level data with the PRM
+ * @pld: low-level per-SoC OMAP PRM data & function pointers to register
+ *
+ * Register per-SoC low-level OMAP PRM data and function pointers with
+ * the OMAP PRM common interface. The caller must keep the data
+ * pointed to by @pld valid until it calls prm_unregister() and
+ * it returns successfully. Returns 0 upon success, -EINVAL if @pld
+ * is NULL, or -EEXIST if prm_register() has already been called
+ * without an intervening prm_unregister().
+ */
+int prm_register(struct prm_ll_data *pld)
+{
+ if (!pld)
+ return -EINVAL;
+
+ if (prm_ll_data != &null_prm_ll_data)
+ return -EEXIST;
+
+ prm_ll_data = pld;
+
return 0;
}
-void __weak omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx)
+/**
+ * prm_unregister - unregister per-SoC low-level data & function pointers
+ * @pld: low-level per-SoC OMAP PRM data & function pointers to unregister
+ *
+ * Unregister per-SoC low-level OMAP PRM data and function pointers
+ * that were previously registered with prm_register(). The
+ * caller may not destroy any of the data pointed to by @pld until
+ * this function returns successfully. Returns 0 upon success, or
+ * -EINVAL if @pld is NULL or if @pld does not match the struct
+ * prm_ll_data * previously registered by prm_register().
+ */
+int prm_unregister(struct prm_ll_data *pld)
{
- WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
-}
+ if (!pld || prm_ll_data != pld)
+ return -EINVAL;
-u32 __weak omap2_prm_rmw_mod_reg_bits(u32 mask, u32 bits,
- s16 module, s16 idx)
-{
- WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
+ prm_ll_data = &null_prm_ll_data;
+
return 0;
}
-
-u32 __weak omap2_prm_set_mod_reg_bits(u32 bits, s16 module, s16 idx)
-{
- WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
- return 0;
-}
-
-u32 __weak omap2_prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
-{
- WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
- return 0;
-}
-
-u32 __weak omap2_prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask)
-{
- WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
- return 0;
-}
-
-int __weak omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift)
-{
- WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
- return 0;
-}
-
-int __weak omap2_prm_assert_hardreset(s16 prm_mod, u8 shift)
-{
- WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
- return 0;
-}
-
-int __weak omap2_prm_deassert_hardreset(s16 prm_mod, u8 rst_shift,
- u8 st_shift)
-{
- WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
- return 0;
-}
-
diff --git a/arch/arm/mach-omap2/prminst44xx.h b/arch/arm/mach-omap2/prminst44xx.h
index 46f2efb..a2ede2d 100644
--- a/arch/arm/mach-omap2/prminst44xx.h
+++ b/arch/arm/mach-omap2/prminst44xx.h
@@ -30,4 +30,6 @@
extern int omap4_prminst_deassert_hardreset(u8 shift, u8 part, s16 inst,
u16 rstctrl_offs);
+extern void omap_prm_base_init(void);
+
#endif
diff --git a/arch/arm/mach-omap2/sdram-hynix-h8mbx00u0mer-0em.h b/arch/arm/mach-omap2/sdram-hynix-h8mbx00u0mer-0em.h
index 8bfaf34..1ee58c2 100644
--- a/arch/arm/mach-omap2/sdram-hynix-h8mbx00u0mer-0em.h
+++ b/arch/arm/mach-omap2/sdram-hynix-h8mbx00u0mer-0em.h
@@ -11,7 +11,7 @@
#ifndef __ARCH_ARM_MACH_OMAP2_SDRAM_HYNIX_H8MBX00U0MER0EM
#define __ARCH_ARM_MACH_OMAP2_SDRAM_HYNIX_H8MBX00U0MER0EM
-#include <plat/sdrc.h>
+#include "sdrc.h"
/* Hynix H8MBX00U0MER-0EM */
static struct omap_sdrc_params h8mbx00u0mer0em_sdrc_params[] = {
diff --git a/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h b/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h
index a391b49..85cccc0 100644
--- a/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h
+++ b/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h
@@ -14,7 +14,7 @@
#ifndef ARCH_ARM_MACH_OMAP2_SDRAM_MICRON_MT46H32M32LF
#define ARCH_ARM_MACH_OMAP2_SDRAM_MICRON_MT46H32M32LF
-#include <plat/sdrc.h>
+#include "sdrc.h"
/* Micron MT46H32M32LF-6 */
/* XXX Using ARE = 0x1 (no autorefresh burst) -- can this be changed? */
diff --git a/arch/arm/mach-omap2/sdram-nokia.c b/arch/arm/mach-omap2/sdram-nokia.c
index 845c4fd..0fa7ffa 100644
--- a/arch/arm/mach-omap2/sdram-nokia.c
+++ b/arch/arm/mach-omap2/sdram-nokia.c
@@ -18,10 +18,8 @@
#include <linux/io.h>
#include "common.h"
-#include <plat/clock.h>
-#include <plat/sdrc.h>
-
#include "sdram-nokia.h"
+#include "sdrc.h"
/* In picoseconds, except for tREF (ns), tXP, tCKE, tWTR (clks) */
struct sdram_timings {
diff --git a/arch/arm/mach-omap2/sdram-numonyx-m65kxxxxam.h b/arch/arm/mach-omap2/sdram-numonyx-m65kxxxxam.h
index cd43529..003f7bf 100644
--- a/arch/arm/mach-omap2/sdram-numonyx-m65kxxxxam.h
+++ b/arch/arm/mach-omap2/sdram-numonyx-m65kxxxxam.h
@@ -11,7 +11,7 @@
#ifndef __ARCH_ARM_MACH_OMAP2_SDRAM_NUMONYX_M65KXXXXAM
#define __ARCH_ARM_MACH_OMAP2_SDRAM_NUMONYX_M65KXXXXAM
-#include <plat/sdrc.h>
+#include "sdrc.h"
/* Numonyx M65KXXXXAM */
static struct omap_sdrc_params m65kxxxxam_sdrc_params[] = {
diff --git a/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h b/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h
index 0e518a7..8dc3de5 100644
--- a/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h
+++ b/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h
@@ -14,7 +14,7 @@
#ifndef ARCH_ARM_MACH_OMAP2_SDRAM_QIMONDA_HYB18M512160AF6
#define ARCH_ARM_MACH_OMAP2_SDRAM_QIMONDA_HYB18M512160AF6
-#include <plat/sdrc.h>
+#include "sdrc.h"
/* Qimonda HYB18M512160AF-6 */
static struct omap_sdrc_params hyb18m512160af6_sdrc_params[] = {
diff --git a/arch/arm/mach-omap2/sdrc.c b/arch/arm/mach-omap2/sdrc.c
index e3d345f..dae7e48 100644
--- a/arch/arm/mach-omap2/sdrc.c
+++ b/arch/arm/mach-omap2/sdrc.c
@@ -24,10 +24,7 @@
#include <linux/io.h>
#include "common.h"
-#include <plat/clock.h>
-#include <plat/sram.h>
-
-#include <plat/sdrc.h>
+#include "clock.h"
#include "sdrc.h"
static struct omap_sdrc_params *sdrc_init_params_cs0, *sdrc_init_params_cs1;
@@ -115,12 +112,10 @@
}
-void __init omap2_set_globals_sdrc(struct omap_globals *omap2_globals)
+void __init omap2_set_globals_sdrc(void __iomem *sdrc, void __iomem *sms)
{
- if (omap2_globals->sdrc)
- omap2_sdrc_base = omap2_globals->sdrc;
- if (omap2_globals->sms)
- omap2_sms_base = omap2_globals->sms;
+ omap2_sdrc_base = sdrc;
+ omap2_sms_base = sms;
}
/**
@@ -160,19 +155,3 @@
sdrc_write_reg(l, SDRC_POWER);
omap2_sms_save_context();
}
-
-void omap2_sms_write_rot_control(u32 val, unsigned ctx)
-{
- sms_write_reg(val, SMS_ROT_CONTROL(ctx));
-}
-
-void omap2_sms_write_rot_size(u32 val, unsigned ctx)
-{
- sms_write_reg(val, SMS_ROT_SIZE(ctx));
-}
-
-void omap2_sms_write_rot_physical_ba(u32 val, unsigned ctx)
-{
- sms_write_reg(val, SMS_ROT_PHYSICAL_BA(ctx));
-}
-
diff --git a/arch/arm/mach-omap2/sdrc.h b/arch/arm/mach-omap2/sdrc.h
index b3f8379..446aa13 100644
--- a/arch/arm/mach-omap2/sdrc.h
+++ b/arch/arm/mach-omap2/sdrc.h
@@ -2,12 +2,14 @@
#define __ARCH_ARM_MACH_OMAP2_SDRC_H
/*
- * OMAP2 SDRC register definitions
+ * OMAP2/3 SDRC/SMS macros and prototypes
*
- * Copyright (C) 2007 Texas Instruments, Inc.
- * Copyright (C) 2007 Nokia Corporation
+ * Copyright (C) 2007-2008, 2012 Texas Instruments, Inc.
+ * Copyright (C) 2007-2008 Nokia Corporation
*
- * Written by Paul Walmsley
+ * Paul Walmsley
+ * Tony Lindgren
+ * Richard Woodruff
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -15,8 +17,6 @@
*/
#undef DEBUG
-#include <plat/sdrc.h>
-
#ifndef __ASSEMBLER__
#include <linux/io.h>
@@ -50,6 +50,60 @@
{
return __raw_readl(OMAP_SMS_REGADDR(reg));
}
+
+extern void omap2_set_globals_sdrc(void __iomem *sdrc, void __iomem *sms);
+
+
+/**
+ * struct omap_sdrc_params - SDRC parameters for a given SDRC clock rate
+ * @rate: SDRC clock rate (in Hz)
+ * @actim_ctrla: Value to program to SDRC_ACTIM_CTRLA for this rate
+ * @actim_ctrlb: Value to program to SDRC_ACTIM_CTRLB for this rate
+ * @rfr_ctrl: Value to program to SDRC_RFR_CTRL for this rate
+ * @mr: Value to program to SDRC_MR for this rate
+ *
+ * This structure holds a pre-computed set of register values for the
+ * SDRC for a given SDRC clock rate and SDRAM chip. These are
+ * intended to be pre-computed and specified in an array in the board-*.c
+ * files. The structure is keyed off the 'rate' field.
+ */
+struct omap_sdrc_params {
+ unsigned long rate;
+ u32 actim_ctrla;
+ u32 actim_ctrlb;
+ u32 rfr_ctrl;
+ u32 mr;
+};
+
+#ifdef CONFIG_SOC_HAS_OMAP2_SDRC
+void omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
+ struct omap_sdrc_params *sdrc_cs1);
+#else
+static inline void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
+ struct omap_sdrc_params *sdrc_cs1) {};
+#endif
+
+int omap2_sdrc_get_params(unsigned long r,
+ struct omap_sdrc_params **sdrc_cs0,
+ struct omap_sdrc_params **sdrc_cs1);
+void omap2_sms_save_context(void);
+void omap2_sms_restore_context(void);
+
+struct memory_timings {
+ u32 m_type; /* ddr = 1, sdr = 0 */
+ u32 dll_mode; /* use lock mode = 1, unlock mode = 0 */
+ u32 slow_dll_ctrl; /* unlock mode, dll value for slow speed */
+ u32 fast_dll_ctrl; /* unlock mode, dll value for fast speed */
+ u32 base_cs; /* base chip select to use for calculations */
+};
+
+extern void omap2xxx_sdrc_init_params(u32 force_lock_to_unlock_mode);
+struct omap_sdrc_params *rx51_get_sdram_timings(void);
+
+u32 omap2xxx_sdrc_dll_is_unlocked(void);
+u32 omap2xxx_sdrc_reprogram(u32 level, u32 force);
+
+
#else
#define OMAP242X_SDRC_REGADDR(reg) \
OMAP2_L3_IO_ADDRESS(OMAP2420_SDRC_BASE + (reg))
@@ -57,6 +111,7 @@
OMAP2_L3_IO_ADDRESS(OMAP243X_SDRC_BASE + (reg))
#define OMAP34XX_SDRC_REGADDR(reg) \
OMAP2_L3_IO_ADDRESS(OMAP343X_SDRC_BASE + (reg))
+
#endif /* __ASSEMBLER__ */
/* Minimum frequency that the SDRC DLL can lock at */
@@ -74,4 +129,85 @@
*/
#define SDRC_MPURATE_LOOPS 96
+/* SDRC register offsets - read/write with sdrc_{read,write}_reg() */
+
+#define SDRC_SYSCONFIG 0x010
+#define SDRC_CS_CFG 0x040
+#define SDRC_SHARING 0x044
+#define SDRC_ERR_TYPE 0x04C
+#define SDRC_DLLA_CTRL 0x060
+#define SDRC_DLLA_STATUS 0x064
+#define SDRC_DLLB_CTRL 0x068
+#define SDRC_DLLB_STATUS 0x06C
+#define SDRC_POWER 0x070
+#define SDRC_MCFG_0 0x080
+#define SDRC_MR_0 0x084
+#define SDRC_EMR2_0 0x08c
+#define SDRC_ACTIM_CTRL_A_0 0x09c
+#define SDRC_ACTIM_CTRL_B_0 0x0a0
+#define SDRC_RFR_CTRL_0 0x0a4
+#define SDRC_MANUAL_0 0x0a8
+#define SDRC_MCFG_1 0x0B0
+#define SDRC_MR_1 0x0B4
+#define SDRC_EMR2_1 0x0BC
+#define SDRC_ACTIM_CTRL_A_1 0x0C4
+#define SDRC_ACTIM_CTRL_B_1 0x0C8
+#define SDRC_RFR_CTRL_1 0x0D4
+#define SDRC_MANUAL_1 0x0D8
+
+#define SDRC_POWER_AUTOCOUNT_SHIFT 8
+#define SDRC_POWER_AUTOCOUNT_MASK (0xffff << SDRC_POWER_AUTOCOUNT_SHIFT)
+#define SDRC_POWER_CLKCTRL_SHIFT 4
+#define SDRC_POWER_CLKCTRL_MASK (0x3 << SDRC_POWER_CLKCTRL_SHIFT)
+#define SDRC_SELF_REFRESH_ON_AUTOCOUNT (0x2 << SDRC_POWER_CLKCTRL_SHIFT)
+
+/*
+ * These values represent the number of memory clock cycles between
+ * autorefresh initiation. They assume 1 refresh per 64 ms (JEDEC), 8192
+ * rows per device, and include a subtraction of a 50 cycle window in the
+ * event that the autorefresh command is delayed due to other SDRC activity.
+ * The '| 1' sets the ARE field to send one autorefresh when the autorefresh
+ * counter reaches 0.
+ *
+ * These represent optimal values for common parts, it won't work for all.
+ * As long as you scale down, most parameters are still work, they just
+ * become sub-optimal. The RFR value goes in the opposite direction. If you
+ * don't adjust it down as your clock period increases the refresh interval
+ * will not be met. Setting all parameters for complete worst case may work,
+ * but may cut memory performance by 2x. Due to errata the DLLs need to be
+ * unlocked and their value needs run time calibration. A dynamic call is
+ * need for that as no single right value exists acorss production samples.
+ *
+ * Only the FULL speed values are given. Current code is such that rate
+ * changes must be made at DPLLoutx2. The actual value adjustment for low
+ * frequency operation will be handled by omap_set_performance()
+ *
+ * By having the boot loader boot up in the fastest L4 speed available likely
+ * will result in something which you can switch between.
+ */
+#define SDRC_RFR_CTRL_165MHz (0x00044c00 | 1)
+#define SDRC_RFR_CTRL_133MHz (0x0003de00 | 1)
+#define SDRC_RFR_CTRL_100MHz (0x0002da01 | 1)
+#define SDRC_RFR_CTRL_110MHz (0x0002da01 | 1) /* Need to calc */
+#define SDRC_RFR_CTRL_BYPASS (0x00005000 | 1) /* Need to calc */
+
+
+/*
+ * SMS register access
+ */
+
+#define OMAP242X_SMS_REGADDR(reg) \
+ (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE + reg)
+#define OMAP243X_SMS_REGADDR(reg) \
+ (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE + reg)
+#define OMAP343X_SMS_REGADDR(reg) \
+ (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE + reg)
+
+/* SMS register offsets - read/write with sms_{read,write}_reg() */
+
+#define SMS_SYSCONFIG 0x010
+/* REVISIT: fill in other SMS registers here */
+
+
+
#endif
diff --git a/arch/arm/mach-omap2/sdrc2xxx.c b/arch/arm/mach-omap2/sdrc2xxx.c
index 73e55e4..9072917 100644
--- a/arch/arm/mach-omap2/sdrc2xxx.c
+++ b/arch/arm/mach-omap2/sdrc2xxx.c
@@ -24,16 +24,13 @@
#include <linux/clk.h>
#include <linux/io.h>
-#include <plat/clock.h>
-#include <plat/sram.h>
-#include <plat/sdrc.h>
-
#include "soc.h"
#include "iomap.h"
#include "common.h"
-#include "prm2xxx_3xxx.h"
+#include "prm2xxx.h"
#include "clock.h"
#include "sdrc.h"
+#include "sram.h"
/* Memory timing, DLL mode flags */
#define M_DDR 1
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 0405c81..aa30a3c 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -28,19 +28,20 @@
#include <linux/console.h>
#include <plat/omap-serial.h>
-#include "common.h"
-#include <plat/dma.h>
-#include <plat/omap_hwmod.h>
-#include <plat/omap_device.h>
-#include <plat/omap-pm.h>
-#include <plat/serial.h>
+#include <plat-omap/dma-omap.h>
+#include "common.h"
+#include "omap_hwmod.h"
+#include "omap_device.h"
+#include "omap-pm.h"
+#include "soc.h"
#include "prm2xxx_3xxx.h"
#include "pm.h"
#include "cm2xxx_3xxx.h"
#include "prm-regbits-34xx.h"
#include "control.h"
#include "mux.h"
+#include "serial.h"
/*
* NOTE: By default the serial auto_suspend timeout is disabled as it causes
@@ -329,6 +330,11 @@
oh->mux = omap_hwmod_mux_init(bdata->pads, bdata->pads_cnt);
+ if (console_uart_id == bdata->id) {
+ omap_device_enable(pdev);
+ pm_runtime_set_active(&pdev->dev);
+ }
+
oh->dev_attr = uart;
if (((cpu_is_omap34xx() || cpu_is_omap44xx()) && bdata->pads)
diff --git a/arch/arm/mach-omap2/serial.h b/arch/arm/mach-omap2/serial.h
new file mode 100644
index 0000000..c4014f0
--- /dev/null
+++ b/arch/arm/mach-omap2/serial.h
@@ -0,0 +1 @@
+#include <mach/serial.h>
diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S
index 5069879..d1dedc8 100644
--- a/arch/arm/mach-omap2/sleep34xx.S
+++ b/arch/arm/mach-omap2/sleep34xx.S
@@ -26,13 +26,12 @@
#include <asm/assembler.h>
-#include <plat/sram.h>
-
#include "omap34xx.h"
#include "iomap.h"
-#include "cm2xxx_3xxx.h"
-#include "prm2xxx_3xxx.h"
+#include "cm3xxx.h"
+#include "prm3xxx.h"
#include "sdrc.h"
+#include "sram.h"
#include "control.h"
/*
diff --git a/arch/arm/mach-omap2/soc.h b/arch/arm/mach-omap2/soc.h
index fc9b96d..f31d907 100644
--- a/arch/arm/mach-omap2/soc.h
+++ b/arch/arm/mach-omap2/soc.h
@@ -1,7 +1,469 @@
-#include <plat/cpu.h>
+/*
+ * OMAP cpu type detection
+ *
+ * Copyright (C) 2004, 2008 Nokia Corporation
+ *
+ * Copyright (C) 2009-11 Texas Instruments.
+ *
+ * Written by Tony Lindgren <tony.lindgren@nokia.com>
+ *
+ * Added OMAP4/5 specific defines - Santosh Shilimkar<santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
#include "omap24xx.h"
#include "omap34xx.h"
#include "omap44xx.h"
#include "ti81xx.h"
#include "am33xx.h"
#include "omap54xx.h"
+
+#ifndef __ASSEMBLY__
+
+#include <linux/bitops.h>
+
+/*
+ * Test if multicore OMAP support is needed
+ */
+#undef MULTI_OMAP2
+#undef OMAP_NAME
+
+#ifdef CONFIG_SOC_OMAP2420
+# ifdef OMAP_NAME
+# undef MULTI_OMAP2
+# define MULTI_OMAP2
+# else
+# define OMAP_NAME omap2420
+# endif
+#endif
+#ifdef CONFIG_SOC_OMAP2430
+# ifdef OMAP_NAME
+# undef MULTI_OMAP2
+# define MULTI_OMAP2
+# else
+# define OMAP_NAME omap2430
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP3
+# ifdef OMAP_NAME
+# undef MULTI_OMAP2
+# define MULTI_OMAP2
+# else
+# define OMAP_NAME omap3
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP4
+# ifdef OMAP_NAME
+# undef MULTI_OMAP2
+# define MULTI_OMAP2
+# else
+# define OMAP_NAME omap4
+# endif
+#endif
+
+#ifdef CONFIG_SOC_OMAP5
+# ifdef OMAP_NAME
+# undef MULTI_OMAP2
+# define MULTI_OMAP2
+# else
+# define OMAP_NAME omap5
+# endif
+#endif
+
+#ifdef CONFIG_SOC_AM33XX
+# ifdef OMAP_NAME
+# undef MULTI_OMAP2
+# define MULTI_OMAP2
+# else
+# define OMAP_NAME am33xx
+# endif
+#endif
+
+/*
+ * Omap device type i.e. EMU/HS/TST/GP/BAD
+ */
+#define OMAP2_DEVICE_TYPE_TEST 0
+#define OMAP2_DEVICE_TYPE_EMU 1
+#define OMAP2_DEVICE_TYPE_SEC 2
+#define OMAP2_DEVICE_TYPE_GP 3
+#define OMAP2_DEVICE_TYPE_BAD 4
+
+int omap_type(void);
+
+/*
+ * omap_rev bits:
+ * CPU id bits (0730, 1510, 1710, 2422...) [31:16]
+ * CPU revision (See _REV_ defined in cpu.h) [15:08]
+ * CPU class bits (15xx, 16xx, 24xx, 34xx...) [07:00]
+ */
+unsigned int omap_rev(void);
+
+/*
+ * Get the CPU revision for OMAP devices
+ */
+#define GET_OMAP_REVISION() ((omap_rev() >> 8) & 0xff)
+
+/*
+ * Macros to group OMAP into cpu classes.
+ * These can be used in most places.
+ * cpu_is_omap24xx(): True for OMAP2420, OMAP2422, OMAP2423, OMAP2430
+ * cpu_is_omap242x(): True for OMAP2420, OMAP2422, OMAP2423
+ * cpu_is_omap243x(): True for OMAP2430
+ * cpu_is_omap343x(): True for OMAP3430
+ * cpu_is_omap443x(): True for OMAP4430
+ * cpu_is_omap446x(): True for OMAP4460
+ * cpu_is_omap447x(): True for OMAP4470
+ * soc_is_omap543x(): True for OMAP5430, OMAP5432
+ */
+#define GET_OMAP_CLASS (omap_rev() & 0xff)
+
+#define IS_OMAP_CLASS(class, id) \
+static inline int is_omap ##class (void) \
+{ \
+ return (GET_OMAP_CLASS == (id)) ? 1 : 0; \
+}
+
+#define GET_AM_CLASS ((omap_rev() >> 24) & 0xff)
+
+#define IS_AM_CLASS(class, id) \
+static inline int is_am ##class (void) \
+{ \
+ return (GET_AM_CLASS == (id)) ? 1 : 0; \
+}
+
+#define GET_TI_CLASS ((omap_rev() >> 24) & 0xff)
+
+#define IS_TI_CLASS(class, id) \
+static inline int is_ti ##class (void) \
+{ \
+ return (GET_TI_CLASS == (id)) ? 1 : 0; \
+}
+
+#define GET_OMAP_SUBCLASS ((omap_rev() >> 20) & 0x0fff)
+
+#define IS_OMAP_SUBCLASS(subclass, id) \
+static inline int is_omap ##subclass (void) \
+{ \
+ return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \
+}
+
+#define IS_TI_SUBCLASS(subclass, id) \
+static inline int is_ti ##subclass (void) \
+{ \
+ return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \
+}
+
+#define IS_AM_SUBCLASS(subclass, id) \
+static inline int is_am ##subclass (void) \
+{ \
+ return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \
+}
+
+IS_OMAP_CLASS(24xx, 0x24)
+IS_OMAP_CLASS(34xx, 0x34)
+IS_OMAP_CLASS(44xx, 0x44)
+IS_AM_CLASS(35xx, 0x35)
+IS_OMAP_CLASS(54xx, 0x54)
+IS_AM_CLASS(33xx, 0x33)
+
+IS_TI_CLASS(81xx, 0x81)
+
+IS_OMAP_SUBCLASS(242x, 0x242)
+IS_OMAP_SUBCLASS(243x, 0x243)
+IS_OMAP_SUBCLASS(343x, 0x343)
+IS_OMAP_SUBCLASS(363x, 0x363)
+IS_OMAP_SUBCLASS(443x, 0x443)
+IS_OMAP_SUBCLASS(446x, 0x446)
+IS_OMAP_SUBCLASS(447x, 0x447)
+IS_OMAP_SUBCLASS(543x, 0x543)
+
+IS_TI_SUBCLASS(816x, 0x816)
+IS_TI_SUBCLASS(814x, 0x814)
+IS_AM_SUBCLASS(335x, 0x335)
+
+#define cpu_is_omap24xx() 0
+#define cpu_is_omap242x() 0
+#define cpu_is_omap243x() 0
+#define cpu_is_omap34xx() 0
+#define cpu_is_omap343x() 0
+#define cpu_is_ti81xx() 0
+#define cpu_is_ti816x() 0
+#define cpu_is_ti814x() 0
+#define soc_is_am35xx() 0
+#define soc_is_am33xx() 0
+#define soc_is_am335x() 0
+#define cpu_is_omap44xx() 0
+#define cpu_is_omap443x() 0
+#define cpu_is_omap446x() 0
+#define cpu_is_omap447x() 0
+#define soc_is_omap54xx() 0
+#define soc_is_omap543x() 0
+
+#if defined(MULTI_OMAP2)
+# if defined(CONFIG_ARCH_OMAP2)
+# undef cpu_is_omap24xx
+# define cpu_is_omap24xx() is_omap24xx()
+# endif
+# if defined (CONFIG_SOC_OMAP2420)
+# undef cpu_is_omap242x
+# define cpu_is_omap242x() is_omap242x()
+# endif
+# if defined (CONFIG_SOC_OMAP2430)
+# undef cpu_is_omap243x
+# define cpu_is_omap243x() is_omap243x()
+# endif
+# if defined(CONFIG_ARCH_OMAP3)
+# undef cpu_is_omap34xx
+# undef cpu_is_omap343x
+# define cpu_is_omap34xx() is_omap34xx()
+# define cpu_is_omap343x() is_omap343x()
+# endif
+#else
+# if defined(CONFIG_ARCH_OMAP2)
+# undef cpu_is_omap24xx
+# define cpu_is_omap24xx() 1
+# endif
+# if defined(CONFIG_SOC_OMAP2420)
+# undef cpu_is_omap242x
+# define cpu_is_omap242x() 1
+# endif
+# if defined(CONFIG_SOC_OMAP2430)
+# undef cpu_is_omap243x
+# define cpu_is_omap243x() 1
+# endif
+# if defined(CONFIG_ARCH_OMAP3)
+# undef cpu_is_omap34xx
+# define cpu_is_omap34xx() 1
+# endif
+# if defined(CONFIG_SOC_OMAP3430)
+# undef cpu_is_omap343x
+# define cpu_is_omap343x() 1
+# endif
+#endif
+
+/*
+ * Macros to detect individual cpu types.
+ * These are only rarely needed.
+ * cpu_is_omap2420(): True for OMAP2420
+ * cpu_is_omap2422(): True for OMAP2422
+ * cpu_is_omap2423(): True for OMAP2423
+ * cpu_is_omap2430(): True for OMAP2430
+ * cpu_is_omap3430(): True for OMAP3430
+ */
+#define GET_OMAP_TYPE ((omap_rev() >> 16) & 0xffff)
+
+#define IS_OMAP_TYPE(type, id) \
+static inline int is_omap ##type (void) \
+{ \
+ return (GET_OMAP_TYPE == (id)) ? 1 : 0; \
+}
+
+IS_OMAP_TYPE(2420, 0x2420)
+IS_OMAP_TYPE(2422, 0x2422)
+IS_OMAP_TYPE(2423, 0x2423)
+IS_OMAP_TYPE(2430, 0x2430)
+IS_OMAP_TYPE(3430, 0x3430)
+
+#define cpu_is_omap2420() 0
+#define cpu_is_omap2422() 0
+#define cpu_is_omap2423() 0
+#define cpu_is_omap2430() 0
+#define cpu_is_omap3430() 0
+#define cpu_is_omap3630() 0
+#define soc_is_omap5430() 0
+
+/* These are needed for the common code */
+#ifdef CONFIG_ARCH_OMAP2PLUS
+#define cpu_is_omap7xx() 0
+#define cpu_is_omap15xx() 0
+#define cpu_is_omap16xx() 0
+#define cpu_is_omap1510() 0
+#define cpu_is_omap1610() 0
+#define cpu_is_omap1611() 0
+#define cpu_is_omap1621() 0
+#define cpu_is_omap1710() 0
+#define cpu_class_is_omap1() 0
+#define cpu_class_is_omap2() 1
+#endif
+
+#if defined(CONFIG_ARCH_OMAP2)
+# undef cpu_is_omap2420
+# undef cpu_is_omap2422
+# undef cpu_is_omap2423
+# undef cpu_is_omap2430
+# define cpu_is_omap2420() is_omap2420()
+# define cpu_is_omap2422() is_omap2422()
+# define cpu_is_omap2423() is_omap2423()
+# define cpu_is_omap2430() is_omap2430()
+#endif
+
+#if defined(CONFIG_ARCH_OMAP3)
+# undef cpu_is_omap3430
+# undef cpu_is_ti81xx
+# undef cpu_is_ti816x
+# undef cpu_is_ti814x
+# undef soc_is_am35xx
+# define cpu_is_omap3430() is_omap3430()
+# undef cpu_is_omap3630
+# define cpu_is_omap3630() is_omap363x()
+# define cpu_is_ti81xx() is_ti81xx()
+# define cpu_is_ti816x() is_ti816x()
+# define cpu_is_ti814x() is_ti814x()
+# define soc_is_am35xx() is_am35xx()
+#endif
+
+# if defined(CONFIG_SOC_AM33XX)
+# undef soc_is_am33xx
+# undef soc_is_am335x
+# define soc_is_am33xx() is_am33xx()
+# define soc_is_am335x() is_am335x()
+#endif
+
+# if defined(CONFIG_ARCH_OMAP4)
+# undef cpu_is_omap44xx
+# undef cpu_is_omap443x
+# undef cpu_is_omap446x
+# undef cpu_is_omap447x
+# define cpu_is_omap44xx() is_omap44xx()
+# define cpu_is_omap443x() is_omap443x()
+# define cpu_is_omap446x() is_omap446x()
+# define cpu_is_omap447x() is_omap447x()
+# endif
+
+# if defined(CONFIG_SOC_OMAP5)
+# undef soc_is_omap54xx
+# undef soc_is_omap543x
+# define soc_is_omap54xx() is_omap54xx()
+# define soc_is_omap543x() is_omap543x()
+#endif
+
+/* Various silicon revisions for omap2 */
+#define OMAP242X_CLASS 0x24200024
+#define OMAP2420_REV_ES1_0 OMAP242X_CLASS
+#define OMAP2420_REV_ES2_0 (OMAP242X_CLASS | (0x1 << 8))
+
+#define OMAP243X_CLASS 0x24300024
+#define OMAP2430_REV_ES1_0 OMAP243X_CLASS
+
+#define OMAP343X_CLASS 0x34300034
+#define OMAP3430_REV_ES1_0 OMAP343X_CLASS
+#define OMAP3430_REV_ES2_0 (OMAP343X_CLASS | (0x1 << 8))
+#define OMAP3430_REV_ES2_1 (OMAP343X_CLASS | (0x2 << 8))
+#define OMAP3430_REV_ES3_0 (OMAP343X_CLASS | (0x3 << 8))
+#define OMAP3430_REV_ES3_1 (OMAP343X_CLASS | (0x4 << 8))
+#define OMAP3430_REV_ES3_1_2 (OMAP343X_CLASS | (0x5 << 8))
+
+#define OMAP363X_CLASS 0x36300034
+#define OMAP3630_REV_ES1_0 OMAP363X_CLASS
+#define OMAP3630_REV_ES1_1 (OMAP363X_CLASS | (0x1 << 8))
+#define OMAP3630_REV_ES1_2 (OMAP363X_CLASS | (0x2 << 8))
+
+#define TI816X_CLASS 0x81600034
+#define TI8168_REV_ES1_0 TI816X_CLASS
+#define TI8168_REV_ES1_1 (TI816X_CLASS | (0x1 << 8))
+
+#define TI814X_CLASS 0x81400034
+#define TI8148_REV_ES1_0 TI814X_CLASS
+#define TI8148_REV_ES2_0 (TI814X_CLASS | (0x1 << 8))
+#define TI8148_REV_ES2_1 (TI814X_CLASS | (0x2 << 8))
+
+#define AM35XX_CLASS 0x35170034
+#define AM35XX_REV_ES1_0 AM35XX_CLASS
+#define AM35XX_REV_ES1_1 (AM35XX_CLASS | (0x1 << 8))
+
+#define AM335X_CLASS 0x33500033
+#define AM335X_REV_ES1_0 AM335X_CLASS
+
+#define OMAP443X_CLASS 0x44300044
+#define OMAP4430_REV_ES1_0 (OMAP443X_CLASS | (0x10 << 8))
+#define OMAP4430_REV_ES2_0 (OMAP443X_CLASS | (0x20 << 8))
+#define OMAP4430_REV_ES2_1 (OMAP443X_CLASS | (0x21 << 8))
+#define OMAP4430_REV_ES2_2 (OMAP443X_CLASS | (0x22 << 8))
+#define OMAP4430_REV_ES2_3 (OMAP443X_CLASS | (0x23 << 8))
+
+#define OMAP446X_CLASS 0x44600044
+#define OMAP4460_REV_ES1_0 (OMAP446X_CLASS | (0x10 << 8))
+#define OMAP4460_REV_ES1_1 (OMAP446X_CLASS | (0x11 << 8))
+
+#define OMAP447X_CLASS 0x44700044
+#define OMAP4470_REV_ES1_0 (OMAP447X_CLASS | (0x10 << 8))
+
+#define OMAP54XX_CLASS 0x54000054
+#define OMAP5430_REV_ES1_0 (OMAP54XX_CLASS | (0x30 << 16) | (0x10 << 8))
+#define OMAP5432_REV_ES1_0 (OMAP54XX_CLASS | (0x32 << 16) | (0x10 << 8))
+
+void omap2xxx_check_revision(void);
+void omap3xxx_check_revision(void);
+void omap4xxx_check_revision(void);
+void omap5xxx_check_revision(void);
+void omap3xxx_check_features(void);
+void ti81xx_check_features(void);
+void omap4xxx_check_features(void);
+
+/*
+ * Runtime detection of OMAP3 features
+ *
+ * OMAP3_HAS_IO_CHAIN_CTRL: Some later members of the OMAP3 chip
+ * family have OS-level control over the I/O chain clock. This is
+ * to avoid a window during which wakeups could potentially be lost
+ * during powerdomain transitions. If this bit is set, it
+ * indicates that the chip does support OS-level control of this
+ * feature.
+ */
+extern u32 omap_features;
+
+#define OMAP3_HAS_L2CACHE BIT(0)
+#define OMAP3_HAS_IVA BIT(1)
+#define OMAP3_HAS_SGX BIT(2)
+#define OMAP3_HAS_NEON BIT(3)
+#define OMAP3_HAS_ISP BIT(4)
+#define OMAP3_HAS_192MHZ_CLK BIT(5)
+#define OMAP3_HAS_IO_WAKEUP BIT(6)
+#define OMAP3_HAS_SDRC BIT(7)
+#define OMAP3_HAS_IO_CHAIN_CTRL BIT(8)
+#define OMAP4_HAS_PERF_SILICON BIT(9)
+
+
+#define OMAP3_HAS_FEATURE(feat,flag) \
+static inline unsigned int omap3_has_ ##feat(void) \
+{ \
+ return omap_features & OMAP3_HAS_ ##flag; \
+} \
+
+OMAP3_HAS_FEATURE(l2cache, L2CACHE)
+OMAP3_HAS_FEATURE(sgx, SGX)
+OMAP3_HAS_FEATURE(iva, IVA)
+OMAP3_HAS_FEATURE(neon, NEON)
+OMAP3_HAS_FEATURE(isp, ISP)
+OMAP3_HAS_FEATURE(192mhz_clk, 192MHZ_CLK)
+OMAP3_HAS_FEATURE(io_wakeup, IO_WAKEUP)
+OMAP3_HAS_FEATURE(sdrc, SDRC)
+OMAP3_HAS_FEATURE(io_chain_ctrl, IO_CHAIN_CTRL)
+
+/*
+ * Runtime detection of OMAP4 features
+ */
+#define OMAP4_HAS_FEATURE(feat, flag) \
+static inline unsigned int omap4_has_ ##feat(void) \
+{ \
+ return omap_features & OMAP4_HAS_ ##flag; \
+} \
+
+OMAP4_HAS_FEATURE(perf_silicon, PERF_SILICON)
+
+#endif /* __ASSEMBLY__ */
+
diff --git a/arch/arm/mach-omap2/sr_device.c b/arch/arm/mach-omap2/sr_device.c
index f8217a5..b0e77a40 100644
--- a/arch/arm/mach-omap2/sr_device.c
+++ b/arch/arm/mach-omap2/sr_device.c
@@ -23,8 +23,8 @@
#include <linux/slab.h>
#include <linux/io.h>
-#include <plat/omap_device.h>
-
+#include "soc.h"
+#include "omap_device.h"
#include "voltage.h"
#include "control.h"
#include "pm.h"
diff --git a/arch/arm/mach-omap2/sram.c b/arch/arm/mach-omap2/sram.c
new file mode 100644
index 0000000..0ff0f06
--- /dev/null
+++ b/arch/arm/mach-omap2/sram.c
@@ -0,0 +1,305 @@
+/*
+ *
+ * OMAP SRAM detection and management
+ *
+ * Copyright (C) 2005 Nokia Corporation
+ * Written by Tony Lindgren <tony@atomide.com>
+ *
+ * Copyright (C) 2009-2012 Texas Instruments
+ * Added OMAP4/5 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+
+#include <asm/fncpy.h>
+#include <asm/tlb.h>
+#include <asm/cacheflush.h>
+
+#include <asm/mach/map.h>
+
+#include "soc.h"
+#include "iomap.h"
+#include "prm2xxx_3xxx.h"
+#include "sdrc.h"
+#include "sram.h"
+
+#define OMAP2_SRAM_PUB_PA (OMAP2_SRAM_PA + 0xf800)
+#define OMAP3_SRAM_PUB_PA (OMAP3_SRAM_PA + 0x8000)
+#ifdef CONFIG_OMAP4_ERRATA_I688
+#define OMAP4_SRAM_PUB_PA OMAP4_SRAM_PA
+#else
+#define OMAP4_SRAM_PUB_PA (OMAP4_SRAM_PA + 0x4000)
+#endif
+#define OMAP5_SRAM_PA 0x40300000
+
+#define SRAM_BOOTLOADER_SZ 0x00
+
+#define OMAP24XX_VA_REQINFOPERM0 OMAP2_L3_IO_ADDRESS(0x68005048)
+#define OMAP24XX_VA_READPERM0 OMAP2_L3_IO_ADDRESS(0x68005050)
+#define OMAP24XX_VA_WRITEPERM0 OMAP2_L3_IO_ADDRESS(0x68005058)
+
+#define OMAP34XX_VA_REQINFOPERM0 OMAP2_L3_IO_ADDRESS(0x68012848)
+#define OMAP34XX_VA_READPERM0 OMAP2_L3_IO_ADDRESS(0x68012850)
+#define OMAP34XX_VA_WRITEPERM0 OMAP2_L3_IO_ADDRESS(0x68012858)
+#define OMAP34XX_VA_ADDR_MATCH2 OMAP2_L3_IO_ADDRESS(0x68012880)
+#define OMAP34XX_VA_SMS_RG_ATT0 OMAP2_L3_IO_ADDRESS(0x6C000048)
+
+#define GP_DEVICE 0x300
+
+#define ROUND_DOWN(value,boundary) ((value) & (~((boundary)-1)))
+
+static unsigned long omap_sram_start;
+static unsigned long omap_sram_skip;
+static unsigned long omap_sram_size;
+
+/*
+ * Depending on the target RAMFS firewall setup, the public usable amount of
+ * SRAM varies. The default accessible size for all device types is 2k. A GP
+ * device allows ARM11 but not other initiators for full size. This
+ * functionality seems ok until some nice security API happens.
+ */
+static int is_sram_locked(void)
+{
+ if (OMAP2_DEVICE_TYPE_GP == omap_type()) {
+ /* RAMFW: R/W access to all initiators for all qualifier sets */
+ if (cpu_is_omap242x()) {
+ __raw_writel(0xFF, OMAP24XX_VA_REQINFOPERM0); /* all q-vects */
+ __raw_writel(0xCFDE, OMAP24XX_VA_READPERM0); /* all i-read */
+ __raw_writel(0xCFDE, OMAP24XX_VA_WRITEPERM0); /* all i-write */
+ }
+ if (cpu_is_omap34xx()) {
+ __raw_writel(0xFFFF, OMAP34XX_VA_REQINFOPERM0); /* all q-vects */
+ __raw_writel(0xFFFF, OMAP34XX_VA_READPERM0); /* all i-read */
+ __raw_writel(0xFFFF, OMAP34XX_VA_WRITEPERM0); /* all i-write */
+ __raw_writel(0x0, OMAP34XX_VA_ADDR_MATCH2);
+ __raw_writel(0xFFFFFFFF, OMAP34XX_VA_SMS_RG_ATT0);
+ }
+ return 0;
+ } else
+ return 1; /* assume locked with no PPA or security driver */
+}
+
+/*
+ * The amount of SRAM depends on the core type.
+ * Note that we cannot try to test for SRAM here because writes
+ * to secure SRAM will hang the system. Also the SRAM is not
+ * yet mapped at this point.
+ */
+static void __init omap_detect_sram(void)
+{
+ omap_sram_skip = SRAM_BOOTLOADER_SZ;
+ if (is_sram_locked()) {
+ if (cpu_is_omap34xx()) {
+ omap_sram_start = OMAP3_SRAM_PUB_PA;
+ if ((omap_type() == OMAP2_DEVICE_TYPE_EMU) ||
+ (omap_type() == OMAP2_DEVICE_TYPE_SEC)) {
+ omap_sram_size = 0x7000; /* 28K */
+ omap_sram_skip += SZ_16K;
+ } else {
+ omap_sram_size = 0x8000; /* 32K */
+ }
+ } else if (cpu_is_omap44xx()) {
+ omap_sram_start = OMAP4_SRAM_PUB_PA;
+ omap_sram_size = 0xa000; /* 40K */
+ } else if (soc_is_omap54xx()) {
+ omap_sram_start = OMAP5_SRAM_PA;
+ omap_sram_size = SZ_128K; /* 128KB */
+ } else {
+ omap_sram_start = OMAP2_SRAM_PUB_PA;
+ omap_sram_size = 0x800; /* 2K */
+ }
+ } else {
+ if (soc_is_am33xx()) {
+ omap_sram_start = AM33XX_SRAM_PA;
+ omap_sram_size = 0x10000; /* 64K */
+ } else if (cpu_is_omap34xx()) {
+ omap_sram_start = OMAP3_SRAM_PA;
+ omap_sram_size = 0x10000; /* 64K */
+ } else if (cpu_is_omap44xx()) {
+ omap_sram_start = OMAP4_SRAM_PA;
+ omap_sram_size = 0xe000; /* 56K */
+ } else if (soc_is_omap54xx()) {
+ omap_sram_start = OMAP5_SRAM_PA;
+ omap_sram_size = SZ_128K; /* 128KB */
+ } else {
+ omap_sram_start = OMAP2_SRAM_PA;
+ if (cpu_is_omap242x())
+ omap_sram_size = 0xa0000; /* 640K */
+ else if (cpu_is_omap243x())
+ omap_sram_size = 0x10000; /* 64K */
+ }
+ }
+}
+
+/*
+ * Note that we cannot use ioremap for SRAM, as clock init needs SRAM early.
+ */
+static void __init omap2_map_sram(void)
+{
+ int cached = 1;
+
+#ifdef CONFIG_OMAP4_ERRATA_I688
+ if (cpu_is_omap44xx()) {
+ omap_sram_start += PAGE_SIZE;
+ omap_sram_size -= SZ_16K;
+ }
+#endif
+ if (cpu_is_omap34xx()) {
+ /*
+ * SRAM must be marked as non-cached on OMAP3 since the
+ * CORE DPLL M2 divider change code (in SRAM) runs with the
+ * SDRAM controller disabled, and if it is marked cached,
+ * the ARM may attempt to write cache lines back to SDRAM
+ * which will cause the system to hang.
+ */
+ cached = 0;
+ }
+
+ omap_map_sram(omap_sram_start, omap_sram_size,
+ omap_sram_skip, cached);
+}
+
+static void (*_omap2_sram_ddr_init)(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
+ u32 base_cs, u32 force_unlock);
+
+void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
+ u32 base_cs, u32 force_unlock)
+{
+ BUG_ON(!_omap2_sram_ddr_init);
+ _omap2_sram_ddr_init(slow_dll_ctrl, fast_dll_ctrl,
+ base_cs, force_unlock);
+}
+
+static void (*_omap2_sram_reprogram_sdrc)(u32 perf_level, u32 dll_val,
+ u32 mem_type);
+
+void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type)
+{
+ BUG_ON(!_omap2_sram_reprogram_sdrc);
+ _omap2_sram_reprogram_sdrc(perf_level, dll_val, mem_type);
+}
+
+static u32 (*_omap2_set_prcm)(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
+
+u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass)
+{
+ BUG_ON(!_omap2_set_prcm);
+ return _omap2_set_prcm(dpll_ctrl_val, sdrc_rfr_val, bypass);
+}
+
+#ifdef CONFIG_SOC_OMAP2420
+static int __init omap242x_sram_init(void)
+{
+ _omap2_sram_ddr_init = omap_sram_push(omap242x_sram_ddr_init,
+ omap242x_sram_ddr_init_sz);
+
+ _omap2_sram_reprogram_sdrc = omap_sram_push(omap242x_sram_reprogram_sdrc,
+ omap242x_sram_reprogram_sdrc_sz);
+
+ _omap2_set_prcm = omap_sram_push(omap242x_sram_set_prcm,
+ omap242x_sram_set_prcm_sz);
+
+ return 0;
+}
+#else
+static inline int omap242x_sram_init(void)
+{
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_SOC_OMAP2430
+static int __init omap243x_sram_init(void)
+{
+ _omap2_sram_ddr_init = omap_sram_push(omap243x_sram_ddr_init,
+ omap243x_sram_ddr_init_sz);
+
+ _omap2_sram_reprogram_sdrc = omap_sram_push(omap243x_sram_reprogram_sdrc,
+ omap243x_sram_reprogram_sdrc_sz);
+
+ _omap2_set_prcm = omap_sram_push(omap243x_sram_set_prcm,
+ omap243x_sram_set_prcm_sz);
+
+ return 0;
+}
+#else
+static inline int omap243x_sram_init(void)
+{
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_ARCH_OMAP3
+
+static u32 (*_omap3_sram_configure_core_dpll)(
+ u32 m2, u32 unlock_dll, u32 f, u32 inc,
+ u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
+ u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
+ u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
+ u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
+
+u32 omap3_configure_core_dpll(u32 m2, u32 unlock_dll, u32 f, u32 inc,
+ u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
+ u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
+ u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
+ u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1)
+{
+ BUG_ON(!_omap3_sram_configure_core_dpll);
+ return _omap3_sram_configure_core_dpll(
+ m2, unlock_dll, f, inc,
+ sdrc_rfr_ctrl_0, sdrc_actim_ctrl_a_0,
+ sdrc_actim_ctrl_b_0, sdrc_mr_0,
+ sdrc_rfr_ctrl_1, sdrc_actim_ctrl_a_1,
+ sdrc_actim_ctrl_b_1, sdrc_mr_1);
+}
+
+void omap3_sram_restore_context(void)
+{
+ omap_sram_reset();
+
+ _omap3_sram_configure_core_dpll =
+ omap_sram_push(omap3_sram_configure_core_dpll,
+ omap3_sram_configure_core_dpll_sz);
+ omap_push_sram_idle();
+}
+
+static inline int omap34xx_sram_init(void)
+{
+ omap3_sram_restore_context();
+ return 0;
+}
+#else
+static inline int omap34xx_sram_init(void)
+{
+ return 0;
+}
+#endif /* CONFIG_ARCH_OMAP3 */
+
+static inline int am33xx_sram_init(void)
+{
+ return 0;
+}
+
+int __init omap_sram_init(void)
+{
+ omap_detect_sram();
+ omap2_map_sram();
+
+ if (cpu_is_omap242x())
+ omap242x_sram_init();
+ else if (cpu_is_omap2430())
+ omap243x_sram_init();
+ else if (soc_is_am33xx())
+ am33xx_sram_init();
+ else if (cpu_is_omap34xx())
+ omap34xx_sram_init();
+
+ return 0;
+}
diff --git a/arch/arm/mach-omap2/sram.h b/arch/arm/mach-omap2/sram.h
new file mode 100644
index 0000000..ca7277c
--- /dev/null
+++ b/arch/arm/mach-omap2/sram.h
@@ -0,0 +1,83 @@
+/*
+ * Interface for functions that need to be run in internal SRAM
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASSEMBLY__
+#include <plat/sram.h>
+
+extern void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
+ u32 base_cs, u32 force_unlock);
+extern void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
+ u32 mem_type);
+extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
+
+extern u32 omap3_configure_core_dpll(
+ u32 m2, u32 unlock_dll, u32 f, u32 inc,
+ u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
+ u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
+ u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
+ u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
+extern void omap3_sram_restore_context(void);
+
+/* Do not use these */
+extern void omap24xx_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
+extern unsigned long omap24xx_sram_reprogram_clock_sz;
+
+extern void omap242x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
+ u32 base_cs, u32 force_unlock);
+extern unsigned long omap242x_sram_ddr_init_sz;
+
+extern u32 omap242x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val,
+ int bypass);
+extern unsigned long omap242x_sram_set_prcm_sz;
+
+extern void omap242x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
+ u32 mem_type);
+extern unsigned long omap242x_sram_reprogram_sdrc_sz;
+
+
+extern void omap243x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
+ u32 base_cs, u32 force_unlock);
+extern unsigned long omap243x_sram_ddr_init_sz;
+
+extern u32 omap243x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val,
+ int bypass);
+extern unsigned long omap243x_sram_set_prcm_sz;
+
+extern void omap243x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
+ u32 mem_type);
+extern unsigned long omap243x_sram_reprogram_sdrc_sz;
+
+extern u32 omap3_sram_configure_core_dpll(
+ u32 m2, u32 unlock_dll, u32 f, u32 inc,
+ u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
+ u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
+ u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
+ u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
+extern unsigned long omap3_sram_configure_core_dpll_sz;
+
+#ifdef CONFIG_PM
+extern void omap_push_sram_idle(void);
+#else
+static inline void omap_push_sram_idle(void) {}
+#endif /* CONFIG_PM */
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * OMAP2+: define the SRAM PA addresses.
+ * Used by the SRAM management code and the idle sleep code.
+ */
+#define OMAP2_SRAM_PA 0x40200000
+#define OMAP3_SRAM_PA 0x40200000
+#ifdef CONFIG_OMAP4_ERRATA_I688
+#define OMAP4_SRAM_PA 0x40304000
+#define OMAP4_SRAM_VA 0xfe404000
+#else
+#define OMAP4_SRAM_PA 0x40300000
+#endif
+#define AM33XX_SRAM_PA 0x40300000
diff --git a/arch/arm/mach-omap2/sram242x.S b/arch/arm/mach-omap2/sram242x.S
index 8f7326c..680a7c5 100644
--- a/arch/arm/mach-omap2/sram242x.S
+++ b/arch/arm/mach-omap2/sram242x.S
@@ -34,8 +34,8 @@
#include "soc.h"
#include "iomap.h"
-#include "prm2xxx_3xxx.h"
-#include "cm2xxx_3xxx.h"
+#include "prm2xxx.h"
+#include "cm2xxx.h"
#include "sdrc.h"
.text
diff --git a/arch/arm/mach-omap2/sram243x.S b/arch/arm/mach-omap2/sram243x.S
index b140d65..a1e9edd 100644
--- a/arch/arm/mach-omap2/sram243x.S
+++ b/arch/arm/mach-omap2/sram243x.S
@@ -34,8 +34,8 @@
#include "soc.h"
#include "iomap.h"
-#include "prm2xxx_3xxx.h"
-#include "cm2xxx_3xxx.h"
+#include "prm2xxx.h"
+#include "cm2xxx.h"
#include "sdrc.h"
.text
diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S
index 2d0ceaa..1446331 100644
--- a/arch/arm/mach-omap2/sram34xx.S
+++ b/arch/arm/mach-omap2/sram34xx.S
@@ -32,7 +32,7 @@
#include "soc.h"
#include "iomap.h"
#include "sdrc.h"
-#include "cm2xxx_3xxx.h"
+#include "cm3xxx.h"
/*
* This file needs be built unconditionally as ARM to interoperate correctly
diff --git a/arch/arm/mach-omap2/ti81xx.h b/arch/arm/mach-omap2/ti81xx.h
index 8f9843f..a1e6caf 100644
--- a/arch/arm/mach-omap2/ti81xx.h
+++ b/arch/arm/mach-omap2/ti81xx.h
@@ -22,6 +22,15 @@
#define TI81XX_CTRL_BASE TI81XX_SCM_BASE
#define TI81XX_PRCM_BASE 0x48180000
+/*
+ * Adjust TAP register base such that omap3_check_revision accesses the correct
+ * TI81XX register for checking device ID (it adds 0x204 to tap base while
+ * TI81XX DEVICE ID register is at offset 0x600 from control base).
+ */
+#define TI81XX_TAP_BASE (TI81XX_CTRL_BASE + \
+ TI81XX_CONTROL_DEVICE_ID - 0x204)
+
+
#define TI81XX_ARM_INTC_BASE 0x48200000
#endif /* __ASM_ARCH_TI81XX_H */
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index 69e4663..c5bc2cb 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -43,10 +43,11 @@
#include <asm/sched_clock.h>
#include <asm/arch_timer.h>
-#include <plat/omap_hwmod.h>
-#include <plat/omap_device.h>
+#include "omap_hwmod.h"
+#include "omap_device.h"
+#include <plat/counter-32k.h>
#include <plat/dmtimer.h>
-#include <plat/omap-pm.h>
+#include "omap-pm.h"
#include "soc.h"
#include "common.h"
@@ -559,6 +560,8 @@
if (timer_dev_attr)
pdata->timer_capability = timer_dev_attr->timer_capability;
+ pdata->get_context_loss_count = omap_pm_get_dev_context_loss_count;
+
pdev = omap_device_build(name, id, oh, pdata, sizeof(*pdata),
NULL, 0, 0);
diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c
index 635e109..e49b40b 100644
--- a/arch/arm/mach-omap2/twl-common.c
+++ b/arch/arm/mach-omap2/twl-common.c
@@ -26,9 +26,6 @@
#include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>
-#include <plat/i2c.h>
-#include <plat/usb.h>
-
#include "soc.h"
#include "twl-common.h"
#include "pm.h"
@@ -73,6 +70,7 @@
{
/* PMIC part*/
omap_mux_init_signal("sys_nirq1", OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE);
+ omap_mux_init_signal("fref_clk0_out.sys_drm_msecure", OMAP_PIN_OUTPUT);
omap_pmic_init(1, 400, pmic_type, 7 + OMAP44XX_IRQ_GIC_START, pmic_data);
/* Register additional devices on i2c1 bus if needed */
@@ -366,7 +364,7 @@
};
static struct regulator_consumer_supply omap4_vdd1_supply[] = {
- REGULATOR_SUPPLY("vcc", "mpu.0"),
+ REGULATOR_SUPPLY("vcc", "cpu0"),
};
static struct regulator_consumer_supply omap4_vdd2_supply[] = {
diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c
index 3c43449..d1dbe12 100644
--- a/arch/arm/mach-omap2/usb-host.c
+++ b/arch/arm/mach-omap2/usb-host.c
@@ -25,10 +25,10 @@
#include <asm/io.h>
-#include <plat/usb.h>
-#include <plat/omap_device.h>
-
+#include "soc.h"
+#include "omap_device.h"
#include "mux.h"
+#include "usb.h"
#ifdef CONFIG_MFD_OMAP_USB_HOST
diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
index 51da21c..7b33b37 100644
--- a/arch/arm/mach-omap2/usb-musb.c
+++ b/arch/arm/mach-omap2/usb-musb.c
@@ -25,12 +25,10 @@
#include <linux/io.h>
#include <linux/usb/musb.h>
-#include <plat/usb.h>
-#include <plat/omap_device.h>
-
-#include "am35xx.h"
-
+#include "omap_device.h"
+#include "soc.h"
#include "mux.h"
+#include "usb.h"
static struct musb_hdrc_config musb_config = {
.multipoint = 1,
diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c
index 805bea6..a8795ff 100644
--- a/arch/arm/mach-omap2/usb-tusb6010.c
+++ b/arch/arm/mach-omap2/usb-tusb6010.c
@@ -15,10 +15,11 @@
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/export.h>
+#include <linux/platform_data/usb-omap.h>
#include <linux/usb/musb.h>
-#include <plat/gpmc.h>
+#include "gpmc.h"
#include "mux.h"
diff --git a/arch/arm/mach-omap2/usb.h b/arch/arm/mach-omap2/usb.h
new file mode 100644
index 0000000..9b986ea
--- /dev/null
+++ b/arch/arm/mach-omap2/usb.h
@@ -0,0 +1,82 @@
+#include <linux/platform_data/usb-omap.h>
+
+/* AM35x */
+/* USB 2.0 PHY Control */
+#define CONF2_PHY_GPIOMODE (1 << 23)
+#define CONF2_OTGMODE (3 << 14)
+#define CONF2_NO_OVERRIDE (0 << 14)
+#define CONF2_FORCE_HOST (1 << 14)
+#define CONF2_FORCE_DEVICE (2 << 14)
+#define CONF2_FORCE_HOST_VBUS_LOW (3 << 14)
+#define CONF2_SESENDEN (1 << 13)
+#define CONF2_VBDTCTEN (1 << 12)
+#define CONF2_REFFREQ_24MHZ (2 << 8)
+#define CONF2_REFFREQ_26MHZ (7 << 8)
+#define CONF2_REFFREQ_13MHZ (6 << 8)
+#define CONF2_REFFREQ (0xf << 8)
+#define CONF2_PHYCLKGD (1 << 7)
+#define CONF2_VBUSSENSE (1 << 6)
+#define CONF2_PHY_PLLON (1 << 5)
+#define CONF2_RESET (1 << 4)
+#define CONF2_PHYPWRDN (1 << 3)
+#define CONF2_OTGPWRDN (1 << 2)
+#define CONF2_DATPOL (1 << 1)
+
+/* TI81XX specific definitions */
+#define USBCTRL0 0x620
+#define USBSTAT0 0x624
+
+/* TI816X PHY controls bits */
+#define TI816X_USBPHY0_NORMAL_MODE (1 << 0)
+#define TI816X_USBPHY_REFCLK_OSC (1 << 8)
+
+/* TI814X PHY controls bits */
+#define USBPHY_CM_PWRDN (1 << 0)
+#define USBPHY_OTG_PWRDN (1 << 1)
+#define USBPHY_CHGDET_DIS (1 << 2)
+#define USBPHY_CHGDET_RSTRT (1 << 3)
+#define USBPHY_SRCONDM (1 << 4)
+#define USBPHY_SINKONDP (1 << 5)
+#define USBPHY_CHGISINK_EN (1 << 6)
+#define USBPHY_CHGVSRC_EN (1 << 7)
+#define USBPHY_DMPULLUP (1 << 8)
+#define USBPHY_DPPULLUP (1 << 9)
+#define USBPHY_CDET_EXTCTL (1 << 10)
+#define USBPHY_GPIO_MODE (1 << 12)
+#define USBPHY_DPOPBUFCTL (1 << 13)
+#define USBPHY_DMOPBUFCTL (1 << 14)
+#define USBPHY_DPINPUT (1 << 15)
+#define USBPHY_DMINPUT (1 << 16)
+#define USBPHY_DPGPIO_PD (1 << 17)
+#define USBPHY_DMGPIO_PD (1 << 18)
+#define USBPHY_OTGVDET_EN (1 << 19)
+#define USBPHY_OTGSESSEND_EN (1 << 20)
+#define USBPHY_DATA_POLARITY (1 << 23)
+
+struct usbhs_omap_board_data {
+ enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS];
+
+ /* have to be valid if phy_reset is true and portx is in phy mode */
+ int reset_gpio_port[OMAP3_HS_USB_PORTS];
+
+ /* Set this to true for ES2.x silicon */
+ unsigned es2_compatibility:1;
+
+ unsigned phy_reset:1;
+
+ /*
+ * Regulators for USB PHYs.
+ * Each PHY can have a separate regulator.
+ */
+ struct regulator *regulator[OMAP3_HS_USB_PORTS];
+};
+
+extern void usb_musb_init(struct omap_musb_board_data *board_data);
+extern void usbhs_init(const struct usbhs_omap_board_data *pdata);
+
+extern void am35x_musb_reset(void);
+extern void am35x_musb_phy_power(u8 on);
+extern void am35x_musb_clear_irq(void);
+extern void am35x_set_mode(u8 musb_mode);
+extern void ti81xx_musb_phy_power(u8 on);
+
diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c
index 880249b..75878c3 100644
--- a/arch/arm/mach-omap2/vc.c
+++ b/arch/arm/mach-omap2/vc.c
@@ -264,7 +264,7 @@
if (initialized) {
if (voltdm->pmic->i2c_high_speed != i2c_high_speed)
- pr_warn("%s: I2C config for vdd_%s does not match other channels (%u).",
+ pr_warn("%s: I2C config for vdd_%s does not match other channels (%u).\n",
__func__, voltdm->name, i2c_high_speed);
return;
}
diff --git a/arch/arm/mach-omap2/wd_timer.c b/arch/arm/mach-omap2/wd_timer.c
index b2f1c67..7c2b4ed 100644
--- a/arch/arm/mach-omap2/wd_timer.c
+++ b/arch/arm/mach-omap2/wd_timer.c
@@ -1,6 +1,8 @@
/*
* OMAP2+ MPU WD_TIMER-specific code
*
+ * Copyright (C) 2012 Texas Instruments, Inc.
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
@@ -11,10 +13,14 @@
#include <linux/io.h>
#include <linux/err.h>
-#include <plat/omap_hwmod.h>
+#include <linux/platform_data/omap-wd-timer.h>
+#include "omap_hwmod.h"
+#include "omap_device.h"
#include "wd_timer.h"
#include "common.h"
+#include "prm.h"
+#include "soc.h"
/*
* In order to avoid any assumptions from bootloader regarding WDT
@@ -26,9 +32,6 @@
#define OMAP_WDT_WPS 0x34
#define OMAP_WDT_SPR 0x48
-/* Maximum microseconds to wait for OMAP module to softreset */
-#define MAX_MODULE_SOFTRESET_WAIT 10000
-
int omap2_wd_timer_disable(struct omap_hwmod *oh)
{
void __iomem *base;
@@ -99,3 +102,32 @@
return (c == MAX_MODULE_SOFTRESET_WAIT) ? -ETIMEDOUT :
omap2_wd_timer_disable(oh);
}
+
+static int __init omap_init_wdt(void)
+{
+ int id = -1;
+ struct platform_device *pdev;
+ struct omap_hwmod *oh;
+ char *oh_name = "wd_timer2";
+ char *dev_name = "omap_wdt";
+ struct omap_wd_timer_platform_data pdata;
+
+ if (!cpu_class_is_omap2() || of_have_populated_dt())
+ return 0;
+
+ oh = omap_hwmod_lookup(oh_name);
+ if (!oh) {
+ pr_err("Could not look up wd_timer%d hwmod\n", id);
+ return -EINVAL;
+ }
+
+ pdata.read_reset_sources = prm_read_reset_sources;
+
+ pdev = omap_device_build(dev_name, id, oh, &pdata,
+ sizeof(struct omap_wd_timer_platform_data),
+ NULL, 0, 0);
+ WARN(IS_ERR(pdev), "Can't build omap_device for %s:%s.\n",
+ dev_name, oh->name);
+ return 0;
+}
+subsys_initcall(omap_init_wdt);
diff --git a/arch/arm/mach-omap2/wd_timer.h b/arch/arm/mach-omap2/wd_timer.h
index f6bbba7..a78f810 100644
--- a/arch/arm/mach-omap2/wd_timer.h
+++ b/arch/arm/mach-omap2/wd_timer.h
@@ -10,7 +10,7 @@
#ifndef __ARCH_ARM_MACH_OMAP2_WD_TIMER_H
#define __ARCH_ARM_MACH_OMAP2_WD_TIMER_H
-#include <plat/omap_hwmod.h>
+#include "omap_hwmod.h"
extern int omap2_wd_timer_disable(struct omap_hwmod *oh);
extern int omap2_wd_timer_reset(struct omap_hwmod *oh);
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 11aa739..86eec41 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -2,27 +2,6 @@
menu "Intel PXA2xx/PXA3xx Implementations"
-config ARCH_PXA_V7
- bool "ARMv7 (PXA95x) based systems"
-
-if ARCH_PXA_V7
-comment "Marvell Dev Platforms (sorted by hardware release time)"
-config MACH_TAVOREVB3
- bool "PXA95x Development Platform (aka TavorEVB III)"
- select CPU_PXA955
-
-config MACH_SAARB
- bool "PXA955 Handheld Platform (aka SAARB)"
- select CPU_PXA955
-endif
-
-config PXA_V7_MACH_AUTO
- def_bool y
- depends on ARCH_PXA_V7
- depends on !MACH_SAARB
- select MACH_TAVOREVB3
-
-if !ARCH_PXA_V7
comment "Intel/Marvell Dev Platforms (sorted by hardware release time)"
config MACH_PXA3XX_DT
@@ -630,7 +609,6 @@
bool "Zipit Z2 Handheld"
select HAVE_PWM
select PXA27x
-endif
endmenu
config PXA25x
@@ -688,18 +666,6 @@
help
PXA935 (codename Tavor-P65)
-config PXA95x
- bool
- select CPU_PJ4
- help
- Select code specific to PXA95x variants
-
-config CPU_PXA955
- bool
- select PXA95x
- help
- PXA950 (codename MG1)
-
config PXA_SHARP_C7xx
bool
select SHARPSL_PM
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index ee88d6e..12c5005 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -19,7 +19,6 @@
obj-$(CONFIG_PXA25x) += mfp-pxa2xx.o clock-pxa2xx.o pxa2xx.o pxa25x.o
obj-$(CONFIG_PXA27x) += mfp-pxa2xx.o clock-pxa2xx.o pxa2xx.o pxa27x.o
obj-$(CONFIG_PXA3xx) += mfp-pxa3xx.o clock-pxa3xx.o pxa3xx.o smemc.o pxa3xx-ulpi.o
-obj-$(CONFIG_PXA95x) += mfp-pxa3xx.o clock-pxa3xx.o pxa3xx.o pxa95x.o smemc.o
obj-$(CONFIG_CPU_PXA300) += pxa300.o
obj-$(CONFIG_CPU_PXA320) += pxa320.o
obj-$(CONFIG_CPU_PXA930) += pxa930.o
@@ -36,9 +35,7 @@
obj-$(CONFIG_MACH_ZYLONITE320) += zylonite.o zylonite_pxa320.o
obj-$(CONFIG_MACH_LITTLETON) += littleton.o
obj-$(CONFIG_MACH_TAVOREVB) += tavorevb.o
-obj-$(CONFIG_MACH_TAVOREVB3) += tavorevb3.o
obj-$(CONFIG_MACH_SAAR) += saar.o
-obj-$(CONFIG_MACH_SAARB) += saarb.o
# 3rd Party Dev Platforms
obj-$(CONFIG_ARCH_PXA_IDP) += idp.o
diff --git a/arch/arm/mach-pxa/clock.h b/arch/arm/mach-pxa/clock.h
index 3a258b1..1f65d32 100644
--- a/arch/arm/mach-pxa/clock.h
+++ b/arch/arm/mach-pxa/clock.h
@@ -57,7 +57,7 @@
extern struct syscore_ops pxa2xx_clock_syscore_ops;
-#if defined(CONFIG_PXA3xx) || defined(CONFIG_PXA95x)
+#if defined(CONFIG_PXA3xx)
#define DEFINE_PXA3_CKEN(_name, _cken, _rate, _delay) \
struct clk clk_##_name = { \
.ops = &clk_pxa3xx_cken_ops, \
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index ddaa04d..daa86d3 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -703,7 +703,7 @@
}
#endif /* CONFIG_PXA27x || CONFIG_PXA3xx */
-#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) || defined(CONFIG_PXA95x)
+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
static struct resource pxa27x_resource_keypad[] = {
[0] = {
.start = 0x41500000,
@@ -872,7 +872,7 @@
.resource = pxa27x_resource_pwm1,
.num_resources = ARRAY_SIZE(pxa27x_resource_pwm1),
};
-#endif /* CONFIG_PXA27x || CONFIG_PXA3xx || CONFIG_PXA95x*/
+#endif /* CONFIG_PXA27x || CONFIG_PXA3xx */
#ifdef CONFIG_PXA3xx
static struct resource pxa3xx_resources_mci2[] = {
@@ -981,7 +981,7 @@
#endif /* CONFIG_PXA3xx */
-#if defined(CONFIG_PXA3xx) || defined(CONFIG_PXA95x)
+#if defined(CONFIG_PXA3xx)
static struct resource pxa3xx_resources_i2c_power[] = {
{
.start = 0x40f500c0,
@@ -1082,7 +1082,7 @@
.resource = pxa3xx_resource_ssp4,
.num_resources = ARRAY_SIZE(pxa3xx_resource_ssp4),
};
-#endif /* CONFIG_PXA3xx || CONFIG_PXA95x */
+#endif /* CONFIG_PXA3xx */
struct resource pxa_resource_gpio[] = {
{
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index 5ecbd17..e2c6391 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -28,6 +28,7 @@
#include <linux/mfd/asic3.h>
#include <linux/mtd/physmap.h>
#include <linux/pda_power.h>
+#include <linux/pwm.h>
#include <linux/pwm_backlight.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/gpio-regulator.h>
@@ -556,7 +557,7 @@
*/
static struct platform_pwm_backlight_data backlight_data = {
- .pwm_id = 1,
+ .pwm_id = -1, /* Superseded by pwm_lookup */
.max_brightness = 200,
.dft_brightness = 100,
.pwm_period_ns = 30923,
@@ -571,6 +572,10 @@
},
};
+static struct pwm_lookup hx4700_pwm_lookup[] = {
+ PWM_LOOKUP("pxa27x-pwm.1", 0, "pwm-backlight", NULL),
+};
+
/*
* USB "Transceiver"
*/
@@ -872,6 +877,7 @@
pxa_set_stuart_info(NULL);
platform_add_devices(devices, ARRAY_SIZE(devices));
+ pwm_add_table(hx4700_pwm_lookup, ARRAY_SIZE(hx4700_pwm_lookup));
pxa_set_ficp_info(&ficp_info);
pxa27x_set_i2c_power_info(NULL);
diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h
index 56d92e5..ccb06e4855 100644
--- a/arch/arm/mach-pxa/include/mach/hardware.h
+++ b/arch/arm/mach-pxa/include/mach/hardware.h
@@ -194,17 +194,6 @@
#define __cpu_is_pxa935(id) (0)
#endif
-#ifdef CONFIG_CPU_PXA955
-#define __cpu_is_pxa955(id) \
- ({ \
- unsigned int _id = (id) >> 4 & 0xfff; \
- _id == 0x581 || _id == 0xc08 \
- || _id == 0xb76; \
- })
-#else
-#define __cpu_is_pxa955(id) (0)
-#endif
-
#define cpu_is_pxa210() \
({ \
__cpu_is_pxa210(read_cpuid_id()); \
@@ -255,10 +244,6 @@
__cpu_is_pxa935(read_cpuid_id()); \
})
-#define cpu_is_pxa955() \
- ({ \
- __cpu_is_pxa955(read_cpuid_id()); \
- })
/*
@@ -297,15 +282,6 @@
#define __cpu_is_pxa93x(id) (0)
#endif
-#ifdef CONFIG_PXA95x
-#define __cpu_is_pxa95x(id) \
- ({ \
- __cpu_is_pxa955(id); \
- })
-#else
-#define __cpu_is_pxa95x(id) (0)
-#endif
-
#define cpu_is_pxa2xx() \
({ \
__cpu_is_pxa2xx(read_cpuid_id()); \
@@ -321,10 +297,6 @@
__cpu_is_pxa93x(read_cpuid_id()); \
})
-#define cpu_is_pxa95x() \
- ({ \
- __cpu_is_pxa95x(read_cpuid_id()); \
- })
/*
* return current memory and LCD clock frequency in units of 10kHz
diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h
index 8765782..48c2fd8 100644
--- a/arch/arm/mach-pxa/include/mach/irqs.h
+++ b/arch/arm/mach-pxa/include/mach/irqs.h
@@ -84,7 +84,6 @@
#define IRQ_PXA935_MMC0 PXA_IRQ(72) /* MMC0 Controller (PXA935) */
#define IRQ_PXA935_MMC1 PXA_IRQ(73) /* MMC1 Controller (PXA935) */
#define IRQ_PXA935_MMC2 PXA_IRQ(74) /* MMC2 Controller (PXA935) */
-#define IRQ_PXA955_MMC3 PXA_IRQ(75) /* MMC3 Controller (PXA955) */
#define IRQ_U2P PXA_IRQ(93) /* USB PHY D+/D- Lines (PXA935) */
#define PXA_GPIO_IRQ_BASE PXA_IRQ(96)
diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx.h b/arch/arm/mach-pxa/include/mach/pxa3xx.h
index cd3e57f4..6dd7fa1 100644
--- a/arch/arm/mach-pxa/include/mach/pxa3xx.h
+++ b/arch/arm/mach-pxa/include/mach/pxa3xx.h
@@ -7,7 +7,6 @@
extern void __init pxa3xx_map_io(void);
extern void __init pxa3xx_init_irq(void);
-extern void __init pxa95x_init_irq(void);
#define pxa3xx_handle_irq ichp_handle_irq
diff --git a/arch/arm/mach-pxa/include/mach/pxa95x.h b/arch/arm/mach-pxa/include/mach/pxa95x.h
deleted file mode 100644
index cbb097c..0000000
--- a/arch/arm/mach-pxa/include/mach/pxa95x.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __MACH_PXA95X_H
-#define __MACH_PXA95X_H
-
-#include <mach/pxa3xx.h>
-#include <mach/mfp-pxa930.h>
-
-#endif /* __MACH_PXA95X_H */
diff --git a/arch/arm/mach-pxa/pxa3xx-ulpi.c b/arch/arm/mach-pxa/pxa3xx-ulpi.c
index 7dbe3cc..e329cce 100644
--- a/arch/arm/mach-pxa/pxa3xx-ulpi.c
+++ b/arch/arm/mach-pxa/pxa3xx-ulpi.c
@@ -384,18 +384,7 @@
.probe = pxa3xx_u2d_probe,
.remove = pxa3xx_u2d_remove,
};
-
-static int pxa3xx_u2d_ulpi_init(void)
-{
- return platform_driver_register(&pxa3xx_u2d_ulpi_driver);
-}
-module_init(pxa3xx_u2d_ulpi_init);
-
-static void __exit pxa3xx_u2d_ulpi_exit(void)
-{
- platform_driver_unregister(&pxa3xx_u2d_ulpi_driver);
-}
-module_exit(pxa3xx_u2d_ulpi_exit);
+module_platform_driver(pxa3xx_u2d_ulpi_driver);
MODULE_DESCRIPTION("PXA3xx U2D ULPI driver");
MODULE_AUTHOR("Igor Grinberg");
diff --git a/arch/arm/mach-pxa/pxa95x.c b/arch/arm/mach-pxa/pxa95x.c
deleted file mode 100644
index 47601f8..0000000
--- a/arch/arm/mach-pxa/pxa95x.c
+++ /dev/null
@@ -1,295 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/pxa95x.c
- *
- * code specific to PXA95x aka MGx
- *
- * Copyright (C) 2009-2010 Marvell International Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pm.h>
-#include <linux/platform_device.h>
-#include <linux/i2c/pxa-i2c.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/syscore_ops.h>
-
-#include <mach/hardware.h>
-#include <mach/pxa3xx-regs.h>
-#include <mach/pxa930.h>
-#include <mach/reset.h>
-#include <mach/pm.h>
-#include <mach/dma.h>
-
-#include "generic.h"
-#include "devices.h"
-#include "clock.h"
-
-static struct mfp_addr_map pxa95x_mfp_addr_map[] __initdata = {
-
- MFP_ADDR(GPIO0, 0x02e0),
- MFP_ADDR(GPIO1, 0x02dc),
- MFP_ADDR(GPIO2, 0x02e8),
- MFP_ADDR(GPIO3, 0x02d8),
- MFP_ADDR(GPIO4, 0x02e4),
- MFP_ADDR(GPIO5, 0x02ec),
- MFP_ADDR(GPIO6, 0x02f8),
- MFP_ADDR(GPIO7, 0x02fc),
- MFP_ADDR(GPIO8, 0x0300),
- MFP_ADDR(GPIO9, 0x02d4),
- MFP_ADDR(GPIO10, 0x02f4),
- MFP_ADDR(GPIO11, 0x02f0),
- MFP_ADDR(GPIO12, 0x0304),
- MFP_ADDR(GPIO13, 0x0310),
- MFP_ADDR(GPIO14, 0x0308),
- MFP_ADDR(GPIO15, 0x030c),
- MFP_ADDR(GPIO16, 0x04e8),
- MFP_ADDR(GPIO17, 0x04f4),
- MFP_ADDR(GPIO18, 0x04f8),
- MFP_ADDR(GPIO19, 0x04fc),
- MFP_ADDR(GPIO20, 0x0518),
- MFP_ADDR(GPIO21, 0x051c),
- MFP_ADDR(GPIO22, 0x04ec),
- MFP_ADDR(GPIO23, 0x0500),
- MFP_ADDR(GPIO24, 0x04f0),
- MFP_ADDR(GPIO25, 0x0504),
- MFP_ADDR(GPIO26, 0x0510),
- MFP_ADDR(GPIO27, 0x0514),
- MFP_ADDR(GPIO28, 0x0520),
- MFP_ADDR(GPIO29, 0x0600),
- MFP_ADDR(GPIO30, 0x0618),
- MFP_ADDR(GPIO31, 0x0610),
- MFP_ADDR(GPIO32, 0x060c),
- MFP_ADDR(GPIO33, 0x061c),
- MFP_ADDR(GPIO34, 0x0620),
- MFP_ADDR(GPIO35, 0x0628),
- MFP_ADDR(GPIO36, 0x062c),
- MFP_ADDR(GPIO37, 0x0630),
- MFP_ADDR(GPIO38, 0x0634),
- MFP_ADDR(GPIO39, 0x0638),
- MFP_ADDR(GPIO40, 0x063c),
- MFP_ADDR(GPIO41, 0x0614),
- MFP_ADDR(GPIO42, 0x0624),
- MFP_ADDR(GPIO43, 0x0608),
- MFP_ADDR(GPIO44, 0x0604),
- MFP_ADDR(GPIO45, 0x050c),
- MFP_ADDR(GPIO46, 0x0508),
- MFP_ADDR(GPIO47, 0x02bc),
- MFP_ADDR(GPIO48, 0x02b4),
- MFP_ADDR(GPIO49, 0x02b8),
- MFP_ADDR(GPIO50, 0x02c8),
- MFP_ADDR(GPIO51, 0x02c0),
- MFP_ADDR(GPIO52, 0x02c4),
- MFP_ADDR(GPIO53, 0x02d0),
- MFP_ADDR(GPIO54, 0x02cc),
- MFP_ADDR(GPIO55, 0x029c),
- MFP_ADDR(GPIO56, 0x02a0),
- MFP_ADDR(GPIO57, 0x0294),
- MFP_ADDR(GPIO58, 0x0298),
- MFP_ADDR(GPIO59, 0x02a4),
- MFP_ADDR(GPIO60, 0x02a8),
- MFP_ADDR(GPIO61, 0x02b0),
- MFP_ADDR(GPIO62, 0x02ac),
- MFP_ADDR(GPIO63, 0x0640),
- MFP_ADDR(GPIO64, 0x065c),
- MFP_ADDR(GPIO65, 0x0648),
- MFP_ADDR(GPIO66, 0x0644),
- MFP_ADDR(GPIO67, 0x0674),
- MFP_ADDR(GPIO68, 0x0658),
- MFP_ADDR(GPIO69, 0x0654),
- MFP_ADDR(GPIO70, 0x0660),
- MFP_ADDR(GPIO71, 0x0668),
- MFP_ADDR(GPIO72, 0x0664),
- MFP_ADDR(GPIO73, 0x0650),
- MFP_ADDR(GPIO74, 0x066c),
- MFP_ADDR(GPIO75, 0x064c),
- MFP_ADDR(GPIO76, 0x0670),
- MFP_ADDR(GPIO77, 0x0678),
- MFP_ADDR(GPIO78, 0x067c),
- MFP_ADDR(GPIO79, 0x0694),
- MFP_ADDR(GPIO80, 0x069c),
- MFP_ADDR(GPIO81, 0x06a0),
- MFP_ADDR(GPIO82, 0x06a4),
- MFP_ADDR(GPIO83, 0x0698),
- MFP_ADDR(GPIO84, 0x06bc),
- MFP_ADDR(GPIO85, 0x06b4),
- MFP_ADDR(GPIO86, 0x06b0),
- MFP_ADDR(GPIO87, 0x06c0),
- MFP_ADDR(GPIO88, 0x06c4),
- MFP_ADDR(GPIO89, 0x06ac),
- MFP_ADDR(GPIO90, 0x0680),
- MFP_ADDR(GPIO91, 0x0684),
- MFP_ADDR(GPIO92, 0x0688),
- MFP_ADDR(GPIO93, 0x0690),
- MFP_ADDR(GPIO94, 0x068c),
- MFP_ADDR(GPIO95, 0x06a8),
- MFP_ADDR(GPIO96, 0x06b8),
- MFP_ADDR(GPIO97, 0x0410),
- MFP_ADDR(GPIO98, 0x0418),
- MFP_ADDR(GPIO99, 0x041c),
- MFP_ADDR(GPIO100, 0x0414),
- MFP_ADDR(GPIO101, 0x0408),
- MFP_ADDR(GPIO102, 0x0324),
- MFP_ADDR(GPIO103, 0x040c),
- MFP_ADDR(GPIO104, 0x0400),
- MFP_ADDR(GPIO105, 0x0328),
- MFP_ADDR(GPIO106, 0x0404),
-
- MFP_ADDR(GPIO159, 0x0524),
- MFP_ADDR(GPIO163, 0x0534),
- MFP_ADDR(GPIO167, 0x0544),
- MFP_ADDR(GPIO168, 0x0548),
- MFP_ADDR(GPIO169, 0x054c),
- MFP_ADDR(GPIO170, 0x0550),
- MFP_ADDR(GPIO171, 0x0554),
- MFP_ADDR(GPIO172, 0x0558),
- MFP_ADDR(GPIO173, 0x055c),
-
- MFP_ADDR(nXCVREN, 0x0204),
- MFP_ADDR(DF_CLE_nOE, 0x020c),
- MFP_ADDR(DF_nADV1_ALE, 0x0218),
- MFP_ADDR(DF_SCLK_E, 0x0214),
- MFP_ADDR(DF_SCLK_S, 0x0210),
- MFP_ADDR(nBE0, 0x021c),
- MFP_ADDR(nBE1, 0x0220),
- MFP_ADDR(DF_nADV2_ALE, 0x0224),
- MFP_ADDR(DF_INT_RnB, 0x0228),
- MFP_ADDR(DF_nCS0, 0x022c),
- MFP_ADDR(DF_nCS1, 0x0230),
- MFP_ADDR(nLUA, 0x0254),
- MFP_ADDR(nLLA, 0x0258),
- MFP_ADDR(DF_nWE, 0x0234),
- MFP_ADDR(DF_nRE_nOE, 0x0238),
- MFP_ADDR(DF_ADDR0, 0x024c),
- MFP_ADDR(DF_ADDR1, 0x0250),
- MFP_ADDR(DF_ADDR2, 0x025c),
- MFP_ADDR(DF_ADDR3, 0x0260),
- MFP_ADDR(DF_IO0, 0x023c),
- MFP_ADDR(DF_IO1, 0x0240),
- MFP_ADDR(DF_IO2, 0x0244),
- MFP_ADDR(DF_IO3, 0x0248),
- MFP_ADDR(DF_IO4, 0x0264),
- MFP_ADDR(DF_IO5, 0x0268),
- MFP_ADDR(DF_IO6, 0x026c),
- MFP_ADDR(DF_IO7, 0x0270),
- MFP_ADDR(DF_IO8, 0x0274),
- MFP_ADDR(DF_IO9, 0x0278),
- MFP_ADDR(DF_IO10, 0x027c),
- MFP_ADDR(DF_IO11, 0x0280),
- MFP_ADDR(DF_IO12, 0x0284),
- MFP_ADDR(DF_IO13, 0x0288),
- MFP_ADDR(DF_IO14, 0x028c),
- MFP_ADDR(DF_IO15, 0x0290),
-
- MFP_ADDR(GSIM_UIO, 0x0314),
- MFP_ADDR(GSIM_UCLK, 0x0318),
- MFP_ADDR(GSIM_UDET, 0x031c),
- MFP_ADDR(GSIM_nURST, 0x0320),
-
- MFP_ADDR(PMIC_INT, 0x06c8),
-
- MFP_ADDR(RDY, 0x0200),
-
- MFP_ADDR_END,
-};
-
-static DEFINE_CK(pxa95x_lcd, LCD, &clk_pxa3xx_hsio_ops);
-static DEFINE_CLK(pxa95x_pout, &clk_pxa3xx_pout_ops, 13000000, 70);
-static DEFINE_PXA3_CKEN(pxa95x_ffuart, FFUART, 14857000, 1);
-static DEFINE_PXA3_CKEN(pxa95x_btuart, BTUART, 14857000, 1);
-static DEFINE_PXA3_CKEN(pxa95x_stuart, STUART, 14857000, 1);
-static DEFINE_PXA3_CKEN(pxa95x_i2c, I2C, 32842000, 0);
-static DEFINE_PXA3_CKEN(pxa95x_keypad, KEYPAD, 32768, 0);
-static DEFINE_PXA3_CKEN(pxa95x_ssp1, SSP1, 13000000, 0);
-static DEFINE_PXA3_CKEN(pxa95x_ssp2, SSP2, 13000000, 0);
-static DEFINE_PXA3_CKEN(pxa95x_ssp3, SSP3, 13000000, 0);
-static DEFINE_PXA3_CKEN(pxa95x_ssp4, SSP4, 13000000, 0);
-static DEFINE_PXA3_CKEN(pxa95x_pwm0, PWM0, 13000000, 0);
-static DEFINE_PXA3_CKEN(pxa95x_pwm1, PWM1, 13000000, 0);
-static DEFINE_PXA3_CKEN(pxa95x_gpio, GPIO, 13000000, 0);
-
-static struct clk_lookup pxa95x_clkregs[] = {
- INIT_CLKREG(&clk_pxa95x_pout, NULL, "CLK_POUT"),
- /* Power I2C clock is always on */
- INIT_CLKREG(&clk_dummy, "pxa3xx-pwri2c.1", NULL),
- INIT_CLKREG(&clk_pxa95x_lcd, "pxa2xx-fb", NULL),
- INIT_CLKREG(&clk_pxa95x_ffuart, "pxa2xx-uart.0", NULL),
- INIT_CLKREG(&clk_pxa95x_btuart, "pxa2xx-uart.1", NULL),
- INIT_CLKREG(&clk_pxa95x_stuart, "pxa2xx-uart.2", NULL),
- INIT_CLKREG(&clk_pxa95x_stuart, "pxa2xx-ir", "UARTCLK"),
- INIT_CLKREG(&clk_pxa95x_i2c, "pxa2xx-i2c.0", NULL),
- INIT_CLKREG(&clk_pxa95x_keypad, "pxa27x-keypad", NULL),
- INIT_CLKREG(&clk_pxa95x_ssp1, "pxa27x-ssp.0", NULL),
- INIT_CLKREG(&clk_pxa95x_ssp2, "pxa27x-ssp.1", NULL),
- INIT_CLKREG(&clk_pxa95x_ssp3, "pxa27x-ssp.2", NULL),
- INIT_CLKREG(&clk_pxa95x_ssp4, "pxa27x-ssp.3", NULL),
- INIT_CLKREG(&clk_pxa95x_pwm0, "pxa27x-pwm.0", NULL),
- INIT_CLKREG(&clk_pxa95x_pwm1, "pxa27x-pwm.1", NULL),
- INIT_CLKREG(&clk_pxa95x_gpio, "pxa-gpio", NULL),
- INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL),
-};
-
-void __init pxa95x_init_irq(void)
-{
- pxa_init_irq(96, NULL);
-}
-
-/*
- * device registration specific to PXA93x.
- */
-
-void __init pxa95x_set_i2c_power_info(struct i2c_pxa_platform_data *info)
-{
- pxa_register_device(&pxa3xx_device_i2c_power, info);
-}
-
-static struct platform_device *devices[] __initdata = {
- &pxa_device_gpio,
- &sa1100_device_rtc,
- &pxa_device_rtc,
- &pxa27x_device_ssp1,
- &pxa27x_device_ssp2,
- &pxa27x_device_ssp3,
- &pxa3xx_device_ssp4,
- &pxa27x_device_pwm0,
- &pxa27x_device_pwm1,
-};
-
-static int __init pxa95x_init(void)
-{
- int ret = 0, i;
-
- if (cpu_is_pxa95x()) {
- mfp_init_base(io_p2v(MFPR_BASE));
- mfp_init_addr(pxa95x_mfp_addr_map);
-
- reset_status = ARSR;
-
- /*
- * clear RDH bit every time after reset
- *
- * Note: the last 3 bits DxS are write-1-to-clear so carefully
- * preserve them here in case they will be referenced later
- */
- ASCR &= ~(ASCR_RDH | ASCR_D1S | ASCR_D2S | ASCR_D3S);
-
- clkdev_add_table(pxa95x_clkregs, ARRAY_SIZE(pxa95x_clkregs));
-
- if ((ret = pxa_init_dma(IRQ_DMA, 32)))
- return ret;
-
- register_syscore_ops(&pxa_irq_syscore_ops);
- register_syscore_ops(&pxa3xx_clock_syscore_ops);
-
- ret = platform_add_devices(devices, ARRAY_SIZE(devices));
- }
-
- return ret;
-}
-
-postcore_initcall(pxa95x_init);
diff --git a/arch/arm/mach-pxa/saarb.c b/arch/arm/mach-pxa/saarb.c
deleted file mode 100644
index 5aded5e..0000000
--- a/arch/arm/mach-pxa/saarb.c
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/saarb.c
- *
- * Support for the Marvell Handheld Platform (aka SAARB)
- *
- * Copyright (C) 2007-2010 Marvell International Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * publishhed by the Free Software Foundation.
- */
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/i2c.h>
-#include <linux/i2c/pxa-i2c.h>
-#include <linux/mfd/88pm860x.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <mach/irqs.h>
-#include <mach/hardware.h>
-#include <mach/mfp.h>
-#include <mach/mfp-pxa930.h>
-#include <mach/pxa95x.h>
-
-#include "generic.h"
-
-#define SAARB_NR_IRQS (IRQ_BOARD_START + 40)
-
-static struct pm860x_touch_pdata saarb_touch = {
- .gpadc_prebias = 1,
- .slot_cycle = 1,
- .tsi_prebias = 6,
- .pen_prebias = 16,
- .pen_prechg = 2,
- .res_x = 300,
-};
-
-static struct pm860x_backlight_pdata saarb_backlight[] = {
- {
- .id = PM8606_ID_BACKLIGHT,
- .iset = PM8606_WLED_CURRENT(24),
- .flags = PM8606_BACKLIGHT1,
- },
- {},
-};
-
-static struct pm860x_led_pdata saarb_led[] = {
- {
- .id = PM8606_ID_LED,
- .iset = PM8606_LED_CURRENT(12),
- .flags = PM8606_LED1_RED,
- }, {
- .id = PM8606_ID_LED,
- .iset = PM8606_LED_CURRENT(12),
- .flags = PM8606_LED1_GREEN,
- }, {
- .id = PM8606_ID_LED,
- .iset = PM8606_LED_CURRENT(12),
- .flags = PM8606_LED1_BLUE,
- }, {
- .id = PM8606_ID_LED,
- .iset = PM8606_LED_CURRENT(12),
- .flags = PM8606_LED2_RED,
- }, {
- .id = PM8606_ID_LED,
- .iset = PM8606_LED_CURRENT(12),
- .flags = PM8606_LED2_GREEN,
- }, {
- .id = PM8606_ID_LED,
- .iset = PM8606_LED_CURRENT(12),
- .flags = PM8606_LED2_BLUE,
- },
-};
-
-static struct pm860x_platform_data saarb_pm8607_info = {
- .touch = &saarb_touch,
- .backlight = &saarb_backlight[0],
- .led = &saarb_led[0],
- .companion_addr = 0x10,
- .irq_mode = 0,
- .irq_base = IRQ_BOARD_START,
-
- .i2c_port = GI2C_PORT,
-};
-
-static struct i2c_board_info saarb_i2c_info[] = {
- {
- .type = "88PM860x",
- .addr = 0x34,
- .platform_data = &saarb_pm8607_info,
- .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO83)),
- },
-};
-
-static void __init saarb_init(void)
-{
- pxa_set_ffuart_info(NULL);
- pxa_set_i2c_info(NULL);
- i2c_register_board_info(0, ARRAY_AND_SIZE(saarb_i2c_info));
-}
-
-MACHINE_START(SAARB, "PXA955 Handheld Platform (aka SAARB)")
- .atag_offset = 0x100,
- .map_io = pxa3xx_map_io,
- .nr_irqs = SAARB_NR_IRQS,
- .init_irq = pxa95x_init_irq,
- .handle_irq = pxa3xx_handle_irq,
- .timer = &pxa_timer,
- .init_machine = saarb_init,
- .restart = pxa_restart,
-MACHINE_END
-
diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c
index 438f02f..842596d 100644
--- a/arch/arm/mach-pxa/spitz_pm.c
+++ b/arch/arm/mach-pxa/spitz_pm.c
@@ -86,10 +86,7 @@
gpio_set_value(SPITZ_GPIO_LED_GREEN, on);
}
-static unsigned long gpio18_config[] = {
- GPIO18_RDY,
- GPIO18_GPIO,
-};
+static unsigned long gpio18_config = GPIO18_GPIO;
static void spitz_presuspend(void)
{
@@ -112,7 +109,7 @@
PGSR3 &= ~SPITZ_GPIO_G3_STROBE_BIT;
PGSR2 |= GPIO_bit(SPITZ_GPIO_KEY_STROBE0);
- pxa2xx_mfp_config(&gpio18_config[0], 1);
+ pxa2xx_mfp_config(&gpio18_config, 1);
gpio_request_one(18, GPIOF_OUT_INIT_HIGH, "Unknown");
gpio_free(18);
@@ -131,7 +128,6 @@
static void spitz_postsuspend(void)
{
- pxa2xx_mfp_config(&gpio18_config[1], 1);
}
static int spitz_should_wakeup(unsigned int resume_on_alarm)
diff --git a/arch/arm/mach-pxa/tavorevb3.c b/arch/arm/mach-pxa/tavorevb3.c
deleted file mode 100644
index f7d9305..0000000
--- a/arch/arm/mach-pxa/tavorevb3.c
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/tavorevb3.c
- *
- * Support for the Marvell EVB3 Development Platform.
- *
- * Copyright: (C) Copyright 2008-2010 Marvell International Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * publishhed by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/i2c.h>
-#include <linux/i2c/pxa-i2c.h>
-#include <linux/gpio.h>
-#include <linux/mfd/88pm860x.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <mach/pxa930.h>
-
-#include "devices.h"
-#include "generic.h"
-
-#define TAVOREVB3_NR_IRQS (IRQ_BOARD_START + 24)
-
-static mfp_cfg_t evb3_mfp_cfg[] __initdata = {
- /* UART */
- GPIO53_UART1_TXD,
- GPIO54_UART1_RXD,
-
- /* PMIC */
- PMIC_INT_GPIO83,
-};
-
-#if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)
-static struct pm860x_touch_pdata evb3_touch = {
- .gpadc_prebias = 1,
- .slot_cycle = 1,
- .tsi_prebias = 6,
- .pen_prebias = 16,
- .pen_prechg = 2,
- .res_x = 300,
-};
-
-static struct pm860x_backlight_pdata evb3_backlight[] = {
- {
- .id = PM8606_ID_BACKLIGHT,
- .iset = PM8606_WLED_CURRENT(24),
- .flags = PM8606_BACKLIGHT1,
- },
- {},
-};
-
-static struct pm860x_led_pdata evb3_led[] = {
- {
- .id = PM8606_ID_LED,
- .iset = PM8606_LED_CURRENT(12),
- .flags = PM8606_LED1_RED,
- }, {
- .id = PM8606_ID_LED,
- .iset = PM8606_LED_CURRENT(12),
- .flags = PM8606_LED1_GREEN,
- }, {
- .id = PM8606_ID_LED,
- .iset = PM8606_LED_CURRENT(12),
- .flags = PM8606_LED1_BLUE,
- }, {
- .id = PM8606_ID_LED,
- .iset = PM8606_LED_CURRENT(12),
- .flags = PM8606_LED2_RED,
- }, {
- .id = PM8606_ID_LED,
- .iset = PM8606_LED_CURRENT(12),
- .flags = PM8606_LED2_GREEN,
- }, {
- .id = PM8606_ID_LED,
- .iset = PM8606_LED_CURRENT(12),
- .flags = PM8606_LED2_BLUE,
- },
-};
-
-static struct pm860x_platform_data evb3_pm8607_info = {
- .touch = &evb3_touch,
- .backlight = &evb3_backlight[0],
- .led = &evb3_led[0],
- .companion_addr = 0x10,
- .irq_mode = 0,
- .irq_base = IRQ_BOARD_START,
-
- .i2c_port = GI2C_PORT,
-};
-
-static struct i2c_board_info evb3_i2c_info[] = {
- {
- .type = "88PM860x",
- .addr = 0x34,
- .platform_data = &evb3_pm8607_info,
- .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO83)),
- },
-};
-
-static void __init evb3_init_i2c(void)
-{
- pxa_set_i2c_info(NULL);
- i2c_register_board_info(0, ARRAY_AND_SIZE(evb3_i2c_info));
-}
-#else
-static inline void evb3_init_i2c(void) {}
-#endif
-
-static void __init evb3_init(void)
-{
- /* initialize MFP configurations */
- pxa3xx_mfp_config(ARRAY_AND_SIZE(evb3_mfp_cfg));
-
- pxa_set_ffuart_info(NULL);
-
- evb3_init_i2c();
-}
-
-MACHINE_START(TAVOREVB3, "PXA950 Evaluation Board (aka TavorEVB3)")
- .atag_offset = 0x100,
- .map_io = pxa3xx_map_io,
- .nr_irqs = TAVOREVB3_NR_IRQS,
- .init_irq = pxa3xx_init_irq,
- .handle_irq = pxa3xx_handle_irq,
- .timer = &pxa_timer,
- .init_machine = evb3_init,
- .restart = pxa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/clock-s3c2443.c b/arch/arm/mach-s3c24xx/clock-s3c2443.c
index 7f689ce..bdaba59 100644
--- a/arch/arm/mach-s3c24xx/clock-s3c2443.c
+++ b/arch/arm/mach-s3c24xx/clock-s3c2443.c
@@ -158,12 +158,6 @@
.devname = "s3c2410-spi.0",
.parent = &clk_p,
.enable = s3c2443_clkcon_enable_p,
- .ctrlbit = S3C2443_PCLKCON_SPI0,
- }, {
- .name = "spi",
- .devname = "s3c2410-spi.1",
- .parent = &clk_p,
- .enable = s3c2443_clkcon_enable_p,
.ctrlbit = S3C2443_PCLKCON_SPI1,
}
};
diff --git a/arch/arm/mach-s3c24xx/s3c2416.c b/arch/arm/mach-s3c24xx/s3c2416.c
index ed5a95ec..77ee0b7 100644
--- a/arch/arm/mach-s3c24xx/s3c2416.c
+++ b/arch/arm/mach-s3c24xx/s3c2416.c
@@ -61,6 +61,7 @@
#include <plat/nand-core.h>
#include <plat/adc-core.h>
#include <plat/rtc-core.h>
+#include <plat/spi-core.h>
static struct map_desc s3c2416_iodesc[] __initdata = {
IODESC_ENT(WATCHDOG),
@@ -132,6 +133,7 @@
/* initialize device information early */
s3c2416_default_sdhci0();
s3c2416_default_sdhci1();
+ s3c64xx_spi_setname("s3c2443-spi");
iotable_init(s3c2416_iodesc, ARRAY_SIZE(s3c2416_iodesc));
}
diff --git a/arch/arm/mach-s3c24xx/s3c2443.c b/arch/arm/mach-s3c24xx/s3c2443.c
index ab648ad..165b6a6 100644
--- a/arch/arm/mach-s3c24xx/s3c2443.c
+++ b/arch/arm/mach-s3c24xx/s3c2443.c
@@ -43,6 +43,7 @@
#include <plat/nand-core.h>
#include <plat/adc-core.h>
#include <plat/rtc-core.h>
+#include <plat/spi-core.h>
static struct map_desc s3c2443_iodesc[] __initdata = {
IODESC_ENT(WATCHDOG),
@@ -100,6 +101,9 @@
s3c24xx_gpiocfg_default.set_pull = s3c2443_gpio_setpull;
s3c24xx_gpiocfg_default.get_pull = s3c2443_gpio_getpull;
+ /* initialize device information early */
+ s3c64xx_spi_setname("s3c2443-spi");
+
iotable_init(s3c2443_iodesc, ARRAY_SIZE(s3c2443_iodesc));
}
diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c
index 28041e8..1a6f857 100644
--- a/arch/arm/mach-s3c64xx/clock.c
+++ b/arch/arm/mach-s3c64xx/clock.c
@@ -138,11 +138,7 @@
.ctrlbit = S3C_CLKCON_PCLK_TSADC,
}, {
.name = "i2c",
-#ifdef CONFIG_S3C_DEV_I2C1
.devname = "s3c2440-i2c.0",
-#else
- .devname = "s3c2440-i2c",
-#endif
.parent = &clk_p,
.enable = s3c64xx_pclk_ctrl,
.ctrlbit = S3C_CLKCON_PCLK_IIC,
@@ -319,10 +315,6 @@
.enable = s3c64xx_sclk_ctrl,
.ctrlbit = S3C_CLKCON_SCLK_MFC,
}, {
- .name = "cam",
- .enable = s3c64xx_sclk_ctrl,
- .ctrlbit = S3C_CLKCON_SCLK_CAM,
- }, {
.name = "sclk_jpeg",
.enable = s3c64xx_sclk_ctrl,
.ctrlbit = S3C_CLKCON_SCLK_JPEG,
@@ -681,15 +673,6 @@
.nr_sources = ARRAY_SIZE(clkset_audio2_list),
};
-static struct clk *clkset_camif_list[] = {
- &clk_h2,
-};
-
-static struct clksrc_sources clkset_camif = {
- .sources = clkset_camif_list,
- .nr_sources = ARRAY_SIZE(clkset_camif_list),
-};
-
static struct clksrc_clk clksrcs[] = {
{
.clk = {
@@ -744,10 +727,9 @@
.name = "camera",
.ctrlbit = S3C_CLKCON_SCLK_CAM,
.enable = s3c64xx_sclk_ctrl,
+ .parent = &clk_h2,
},
.reg_div = { .reg = S3C_CLK_DIV0, .shift = 20, .size = 4 },
- .reg_src = { .reg = NULL, .shift = 0, .size = 0 },
- .sources = &clkset_camif,
},
};
diff --git a/arch/arm/mach-s3c64xx/common.c b/arch/arm/mach-s3c64xx/common.c
index be746e3..aef303b 100644
--- a/arch/arm/mach-s3c64xx/common.c
+++ b/arch/arm/mach-s3c64xx/common.c
@@ -155,7 +155,6 @@
/* initialise the io descriptors we need for initialisation */
iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc));
iotable_init(mach_desc, size);
- init_consistent_dma_size(SZ_8M);
/* detect cpu id */
s3c64xx_init_cpu();
diff --git a/arch/arm/mach-s5p64x0/common.c b/arch/arm/mach-s5p64x0/common.c
index 6e6a0a9..8ae5800 100644
--- a/arch/arm/mach-s5p64x0/common.c
+++ b/arch/arm/mach-s5p64x0/common.c
@@ -44,6 +44,7 @@
#include <plat/sdhci.h>
#include <plat/adc-core.h>
#include <plat/fb-core.h>
+#include <plat/spi-core.h>
#include <plat/gpio-cfg.h>
#include <plat/regs-irqtype.h>
#include <plat/regs-serial.h>
@@ -179,13 +180,13 @@
/* initialize any device information early */
s3c_adc_setname("s3c64xx-adc");
s3c_fb_setname("s5p64x0-fb");
+ s3c64xx_spi_setname("s5p64x0-spi");
s5p64x0_default_sdhci0();
s5p64x0_default_sdhci1();
s5p6440_default_sdhci2();
iotable_init(s5p6440_iodesc, ARRAY_SIZE(s5p6440_iodesc));
- init_consistent_dma_size(SZ_8M);
}
void __init s5p6450_map_io(void)
@@ -193,13 +194,13 @@
/* initialize any device information early */
s3c_adc_setname("s3c64xx-adc");
s3c_fb_setname("s5p64x0-fb");
+ s3c64xx_spi_setname("s5p64x0-spi");
s5p64x0_default_sdhci0();
s5p64x0_default_sdhci1();
s5p6450_default_sdhci2();
iotable_init(s5p6450_iodesc, ARRAY_SIZE(s5p6450_iodesc));
- init_consistent_dma_size(SZ_8M);
}
/*
diff --git a/arch/arm/mach-s5pc100/common.c b/arch/arm/mach-s5pc100/common.c
index 6219086..cc6e561 100644
--- a/arch/arm/mach-s5pc100/common.c
+++ b/arch/arm/mach-s5pc100/common.c
@@ -45,6 +45,7 @@
#include <plat/fb-core.h>
#include <plat/iic-core.h>
#include <plat/onenand-core.h>
+#include <plat/spi-core.h>
#include <plat/regs-serial.h>
#include <plat/watchdog-reset.h>
@@ -165,6 +166,8 @@
s3c_onenand_setname("s5pc100-onenand");
s3c_fb_setname("s5pc100-fb");
s3c_cfcon_setname("s5pc100-pata");
+
+ s3c64xx_spi_setname("s5pc100-spi");
}
void __init s5pc100_init_clocks(int xtal)
diff --git a/arch/arm/mach-s5pv210/common.c b/arch/arm/mach-s5pv210/common.c
index 4c9e902..9dfe93e 100644
--- a/arch/arm/mach-s5pv210/common.c
+++ b/arch/arm/mach-s5pv210/common.c
@@ -43,6 +43,7 @@
#include <plat/iic-core.h>
#include <plat/keypad-core.h>
#include <plat/tv-core.h>
+#include <plat/spi-core.h>
#include <plat/regs-serial.h>
#include "common.h"
@@ -168,8 +169,6 @@
void __init s5pv210_map_io(void)
{
- init_consistent_dma_size(14 << 20);
-
/* initialise device information early */
s5pv210_default_sdhci0();
s5pv210_default_sdhci1();
@@ -196,6 +195,8 @@
/* setup TV devices */
s5p_hdmi_setname("s5pv210-hdmi");
+
+ s3c64xx_spi_setname("s5pv210-spi");
}
void __init s5pv210_init_clocks(int xtal)
diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c
index 55e1dba..c72b310 100644
--- a/arch/arm/mach-s5pv210/mach-goni.c
+++ b/arch/arm/mach-s5pv210/mach-goni.c
@@ -774,7 +774,6 @@
/* MoviNAND */
static struct s3c_sdhci_platdata goni_hsmmc0_data __initdata = {
.max_width = 4,
- .host_caps2 = MMC_CAP2_BROKEN_VOLTAGE,
.cd_type = S3C_SDHCI_CD_PERMANENT,
};
diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c
index 11bb1d9..96f1139 100644
--- a/arch/arm/mach-shmobile/setup-r8a7740.c
+++ b/arch/arm/mach-shmobile/setup-r8a7740.c
@@ -66,12 +66,6 @@
void __init r8a7740_map_io(void)
{
iotable_init(r8a7740_io_desc, ARRAY_SIZE(r8a7740_io_desc));
-
- /*
- * DMA memory at 0xff200000 - 0xffdfffff. The default 2MB size isn't
- * enough to allocate the frame buffer memory.
- */
- init_consistent_dma_size(12 << 20);
}
/* SCIFA0 */
diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c
index 2917668..ebbffc2 100644
--- a/arch/arm/mach-shmobile/setup-r8a7779.c
+++ b/arch/arm/mach-shmobile/setup-r8a7779.c
@@ -247,7 +247,7 @@
{
#ifdef CONFIG_CACHE_L2X0
/* Early BRESP enable, Shared attribute override enable, 64K*16way */
- l2x0_init((void __iomem __force *)(0xf0100000), 0x40470000, 0x82000fff);
+ l2x0_init(IOMEM(0xf0100000), 0x40470000, 0x82000fff);
#endif
r8a7779_pm_init();
diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c
index a07954f..be6f746 100644
--- a/arch/arm/mach-shmobile/setup-sh7372.c
+++ b/arch/arm/mach-shmobile/setup-sh7372.c
@@ -58,12 +58,6 @@
void __init sh7372_map_io(void)
{
iotable_init(sh7372_io_desc, ARRAY_SIZE(sh7372_io_desc));
-
- /*
- * DMA memory at 0xff200000 - 0xffdfffff. The default 2MB size isn't
- * enough to allocate the frame buffer memory.
- */
- init_consistent_dma_size(12 << 20);
}
/* SCIFA0 */
diff --git a/arch/arm/mach-spear13xx/include/mach/spear1310_misc_regs.h b/arch/arm/mach-spear13xx/include/mach/spear1310_misc_regs.h
deleted file mode 100644
index e69de29..0000000
--- a/arch/arm/mach-spear13xx/include/mach/spear1310_misc_regs.h
+++ /dev/null
diff --git a/arch/arm/mach-spear13xx/include/mach/spear1340_misc_regs.h b/arch/arm/mach-spear13xx/include/mach/spear1340_misc_regs.h
deleted file mode 100644
index e69de29..0000000
--- a/arch/arm/mach-spear13xx/include/mach/spear1340_misc_regs.h
+++ /dev/null
diff --git a/arch/arm/mach-tegra/apbio.c b/arch/arm/mach-tegra/apbio.c
index b5015d0..d091675b 100644
--- a/arch/arm/mach-tegra/apbio.c
+++ b/arch/arm/mach-tegra/apbio.c
@@ -15,7 +15,6 @@
#include <linux/kernel.h>
#include <linux/io.h>
-#include <mach/iomap.h>
#include <linux/of.h>
#include <linux/dmaengine.h>
#include <linux/dma-mapping.h>
@@ -24,9 +23,8 @@
#include <linux/sched.h>
#include <linux/mutex.h>
-#include <mach/dma.h>
-
#include "apbio.h"
+#include "iomap.h"
#if defined(CONFIG_TEGRA20_APB_DMA)
static DEFINE_MUTEX(tegra_apb_dma_lock);
@@ -71,7 +69,6 @@
dma_sconfig.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
dma_sconfig.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
- dma_sconfig.slave_id = TEGRA_DMA_REQ_SEL_CNTR;
dma_sconfig.src_maxburst = 1;
dma_sconfig.dst_maxburst = 1;
diff --git a/arch/arm/mach-tegra/board-dt-tegra20.c b/arch/arm/mach-tegra/board-dt-tegra20.c
index aa5325c..71569c0 100644
--- a/arch/arm/mach-tegra/board-dt-tegra20.c
+++ b/arch/arm/mach-tegra/board-dt-tegra20.c
@@ -40,12 +40,10 @@
#include <asm/mach/time.h>
#include <asm/setup.h>
-#include <mach/iomap.h>
-#include <mach/irqs.h>
-
#include "board.h"
#include "clock.h"
#include "common.h"
+#include "iomap.h"
struct tegra_ehci_platform_data tegra_ehci1_pdata = {
.operating_mode = TEGRA_USB_OTG,
diff --git a/arch/arm/mach-tegra/board-dt-tegra30.c b/arch/arm/mach-tegra/board-dt-tegra30.c
index 5e92a81..e561703 100644
--- a/arch/arm/mach-tegra/board-dt-tegra30.c
+++ b/arch/arm/mach-tegra/board-dt-tegra30.c
@@ -33,11 +33,10 @@
#include <asm/mach/arch.h>
#include <asm/hardware/gic.h>
-#include <mach/iomap.h>
-
#include "board.h"
#include "clock.h"
#include "common.h"
+#include "iomap.h"
struct of_dev_auxdata tegra30_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("nvidia,tegra20-sdhci", 0x78000000, "sdhci-tegra.0", NULL),
diff --git a/arch/arm/mach-tegra/clock.c b/arch/arm/mach-tegra/clock.c
index fd82085..867bf8b 100644
--- a/arch/arm/mach-tegra/clock.c
+++ b/arch/arm/mach-tegra/clock.c
@@ -27,8 +27,6 @@
#include <linux/seq_file.h>
#include <linux/slab.h>
-#include <mach/clk.h>
-
#include "board.h"
#include "clock.h"
#include "tegra_cpu_car.h"
diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c
index 0b0a5f5..f688daa 100644
--- a/arch/arm/mach-tegra/common.c
+++ b/arch/arm/mach-tegra/common.c
@@ -26,13 +26,13 @@
#include <asm/hardware/cache-l2x0.h>
#include <asm/hardware/gic.h>
-#include <mach/iomap.h>
#include <mach/powergate.h>
#include "board.h"
#include "clock.h"
#include "common.h"
#include "fuse.h"
+#include "iomap.h"
#include "pmc.h"
#include "apbio.h"
#include "sleep.h"
diff --git a/arch/arm/mach-tegra/cpu-tegra.c b/arch/arm/mach-tegra/cpu-tegra.c
index 627bf0f..a74d3c7 100644
--- a/arch/arm/mach-tegra/cpu-tegra.c
+++ b/arch/arm/mach-tegra/cpu-tegra.c
@@ -30,9 +30,6 @@
#include <linux/io.h>
#include <linux/suspend.h>
-
-#include <mach/clk.h>
-
/* Frequency table index must be sequential starting at 0 */
static struct cpufreq_frequency_table freq_table[] = {
{ 0, 216000 },
diff --git a/arch/arm/mach-tegra/cpuidle.c b/arch/arm/mach-tegra/cpuidle.c
index 566e2f8..9a6f051 100644
--- a/arch/arm/mach-tegra/cpuidle.c
+++ b/arch/arm/mach-tegra/cpuidle.c
@@ -29,8 +29,6 @@
#include <asm/proc-fns.h>
-#include <mach/iomap.h>
-
static int tegra_idle_enter_lp3(struct cpuidle_device *dev,
struct cpuidle_driver *drv, int index);
diff --git a/arch/arm/mach-tegra/flowctrl.c b/arch/arm/mach-tegra/flowctrl.c
index f07488e..ffaa286 100644
--- a/arch/arm/mach-tegra/flowctrl.c
+++ b/arch/arm/mach-tegra/flowctrl.c
@@ -22,9 +22,8 @@
#include <linux/kernel.h>
#include <linux/io.h>
-#include <mach/iomap.h>
-
#include "flowctrl.h"
+#include "iomap.h"
u8 flowctrl_offset_halt_cpu[] = {
FLOW_CTRL_HALT_CPU0_EVENTS,
diff --git a/arch/arm/mach-tegra/fuse.c b/arch/arm/mach-tegra/fuse.c
index 0b7db17..6c752e8 100644
--- a/arch/arm/mach-tegra/fuse.c
+++ b/arch/arm/mach-tegra/fuse.c
@@ -21,9 +21,8 @@
#include <linux/io.h>
#include <linux/export.h>
-#include <mach/iomap.h>
-
#include "fuse.h"
+#include "iomap.h"
#include "apbio.h"
#define FUSE_UID_LOW 0x108
diff --git a/arch/arm/mach-tegra/headsmp.S b/arch/arm/mach-tegra/headsmp.S
index 6addc78..93f0370 100644
--- a/arch/arm/mach-tegra/headsmp.S
+++ b/arch/arm/mach-tegra/headsmp.S
@@ -3,9 +3,8 @@
#include <asm/cache.h>
-#include <mach/iomap.h>
-
#include "flowctrl.h"
+#include "iomap.h"
#include "reset.h"
#include "sleep.h"
diff --git a/arch/arm/mach-tegra/include/mach/debug-macro.S b/arch/arm/mach-tegra/include/mach/debug-macro.S
index 8ce0661..44ca7b1 100644
--- a/arch/arm/mach-tegra/include/mach/debug-macro.S
+++ b/arch/arm/mach-tegra/include/mach/debug-macro.S
@@ -26,8 +26,8 @@
#include <linux/serial_reg.h>
-#include <mach/iomap.h>
-#include <mach/irammap.h>
+#include "../../iomap.h"
+#include "../../irammap.h"
.macro addruart, rp, rv, tmp
adr \rp, 99f @ actual addr of 99f
diff --git a/arch/arm/mach-tegra/include/mach/dma.h b/arch/arm/mach-tegra/include/mach/dma.h
deleted file mode 100644
index 3081cc6..0000000
--- a/arch/arm/mach-tegra/include/mach/dma.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * arch/arm/mach-tegra/include/mach/dma.h
- *
- * Copyright (c) 2008-2009, NVIDIA Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
- */
-
-#ifndef __MACH_TEGRA_DMA_H
-#define __MACH_TEGRA_DMA_H
-
-#include <linux/list.h>
-
-#define TEGRA_DMA_REQ_SEL_CNTR 0
-#define TEGRA_DMA_REQ_SEL_I2S_2 1
-#define TEGRA_DMA_REQ_SEL_I2S_1 2
-#define TEGRA_DMA_REQ_SEL_SPD_I 3
-#define TEGRA_DMA_REQ_SEL_UI_I 4
-#define TEGRA_DMA_REQ_SEL_MIPI 5
-#define TEGRA_DMA_REQ_SEL_I2S2_2 6
-#define TEGRA_DMA_REQ_SEL_I2S2_1 7
-#define TEGRA_DMA_REQ_SEL_UARTA 8
-#define TEGRA_DMA_REQ_SEL_UARTB 9
-#define TEGRA_DMA_REQ_SEL_UARTC 10
-#define TEGRA_DMA_REQ_SEL_SPI 11
-#define TEGRA_DMA_REQ_SEL_AC97 12
-#define TEGRA_DMA_REQ_SEL_ACMODEM 13
-#define TEGRA_DMA_REQ_SEL_SL4B 14
-#define TEGRA_DMA_REQ_SEL_SL2B1 15
-#define TEGRA_DMA_REQ_SEL_SL2B2 16
-#define TEGRA_DMA_REQ_SEL_SL2B3 17
-#define TEGRA_DMA_REQ_SEL_SL2B4 18
-#define TEGRA_DMA_REQ_SEL_UARTD 19
-#define TEGRA_DMA_REQ_SEL_UARTE 20
-#define TEGRA_DMA_REQ_SEL_I2C 21
-#define TEGRA_DMA_REQ_SEL_I2C2 22
-#define TEGRA_DMA_REQ_SEL_I2C3 23
-#define TEGRA_DMA_REQ_SEL_DVC_I2C 24
-#define TEGRA_DMA_REQ_SEL_OWR 25
-#define TEGRA_DMA_REQ_SEL_INVALID 31
-
-#endif
diff --git a/arch/arm/mach-tegra/include/mach/powergate.h b/arch/arm/mach-tegra/include/mach/powergate.h
index 4752b1a68..06763fe 100644
--- a/arch/arm/mach-tegra/include/mach/powergate.h
+++ b/arch/arm/mach-tegra/include/mach/powergate.h
@@ -20,6 +20,8 @@
#ifndef _MACH_TEGRA_POWERGATE_H_
#define _MACH_TEGRA_POWERGATE_H_
+struct clk;
+
#define TEGRA_POWERGATE_CPU 0
#define TEGRA_POWERGATE_3D 1
#define TEGRA_POWERGATE_VENC 2
diff --git a/arch/arm/mach-tegra/include/mach/uncompress.h b/arch/arm/mach-tegra/include/mach/uncompress.h
index 937c4c5..27725750 100644
--- a/arch/arm/mach-tegra/include/mach/uncompress.h
+++ b/arch/arm/mach-tegra/include/mach/uncompress.h
@@ -28,8 +28,8 @@
#include <linux/types.h>
#include <linux/serial_reg.h>
-#include <mach/iomap.h>
-#include <mach/irammap.h>
+#include "../../iomap.h"
+#include "../../irammap.h"
#define BIT(x) (1 << (x))
#define ARRAY_SIZE(arr) (sizeof(arr) / sizeof((arr)[0]))
diff --git a/arch/arm/mach-tegra/io.c b/arch/arm/mach-tegra/io.c
index 58b4baf..7d09f30 100644
--- a/arch/arm/mach-tegra/io.c
+++ b/arch/arm/mach-tegra/io.c
@@ -26,9 +26,9 @@
#include <asm/page.h>
#include <asm/mach/map.h>
-#include <mach/iomap.h>
#include "board.h"
+#include "iomap.h"
static struct map_desc tegra_io_desc[] __initdata = {
{
diff --git a/arch/arm/mach-tegra/include/mach/iomap.h b/arch/arm/mach-tegra/iomap.h
similarity index 99%
rename from arch/arm/mach-tegra/include/mach/iomap.h
rename to arch/arm/mach-tegra/iomap.h
index fee3a94..5315103 100644
--- a/arch/arm/mach-tegra/include/mach/iomap.h
+++ b/arch/arm/mach-tegra/iomap.h
@@ -1,6 +1,4 @@
/*
- * arch/arm/mach-tegra/include/mach/iomap.h
- *
* Copyright (C) 2010 Google, Inc.
*
* Author:
diff --git a/arch/arm/mach-tegra/include/mach/irammap.h b/arch/arm/mach-tegra/irammap.h
similarity index 100%
rename from arch/arm/mach-tegra/include/mach/irammap.h
rename to arch/arm/mach-tegra/irammap.h
diff --git a/arch/arm/mach-tegra/irq.c b/arch/arm/mach-tegra/irq.c
index 2f5bd2d..b7886f1 100644
--- a/arch/arm/mach-tegra/irq.c
+++ b/arch/arm/mach-tegra/irq.c
@@ -25,9 +25,8 @@
#include <asm/hardware/gic.h>
-#include <mach/iomap.h>
-
#include "board.h"
+#include "iomap.h"
#define ICTLR_CPU_IEP_VFIQ 0x08
#define ICTLR_CPU_IEP_FIR 0x14
diff --git a/arch/arm/mach-tegra/pcie.c b/arch/arm/mach-tegra/pcie.c
index a8dba64..f18fc3a 100644
--- a/arch/arm/mach-tegra/pcie.c
+++ b/arch/arm/mach-tegra/pcie.c
@@ -37,11 +37,11 @@
#include <asm/sizes.h>
#include <asm/mach/pci.h>
-#include <mach/iomap.h>
#include <mach/clk.h>
#include <mach/powergate.h>
#include "board.h"
+#include "iomap.h"
/* register definitions */
#define AFI_OFFSET 0x3800
diff --git a/arch/arm/mach-tegra/platsmp.c b/arch/arm/mach-tegra/platsmp.c
index 81cb265..1b926df 100644
--- a/arch/arm/mach-tegra/platsmp.c
+++ b/arch/arm/mach-tegra/platsmp.c
@@ -24,8 +24,6 @@
#include <asm/mach-types.h>
#include <asm/smp_scu.h>
-#include <mach/clk.h>
-#include <mach/iomap.h>
#include <mach/powergate.h>
#include "fuse.h"
@@ -34,6 +32,7 @@
#include "tegra_cpu_car.h"
#include "common.h"
+#include "iomap.h"
extern void tegra_secondary_startup(void);
diff --git a/arch/arm/mach-tegra/pmc.c b/arch/arm/mach-tegra/pmc.c
index 7af6a54..d4fdb5f 100644
--- a/arch/arm/mach-tegra/pmc.c
+++ b/arch/arm/mach-tegra/pmc.c
@@ -19,7 +19,7 @@
#include <linux/io.h>
#include <linux/of.h>
-#include <mach/iomap.h>
+#include "iomap.h"
#define PMC_CTRL 0x0
#define PMC_CTRL_INTR_LOW (1 << 17)
diff --git a/arch/arm/mach-tegra/powergate.c b/arch/arm/mach-tegra/powergate.c
index de0662d..2cc1185 100644
--- a/arch/arm/mach-tegra/powergate.c
+++ b/arch/arm/mach-tegra/powergate.c
@@ -28,10 +28,10 @@
#include <linux/spinlock.h>
#include <mach/clk.h>
-#include <mach/iomap.h>
#include <mach/powergate.h>
#include "fuse.h"
+#include "iomap.h"
#define PWRGATE_TOGGLE 0x30
#define PWRGATE_TOGGLE_START (1 << 8)
diff --git a/arch/arm/mach-tegra/reset.c b/arch/arm/mach-tegra/reset.c
index 5beb7eb..e05da7d 100644
--- a/arch/arm/mach-tegra/reset.c
+++ b/arch/arm/mach-tegra/reset.c
@@ -22,9 +22,8 @@
#include <asm/cacheflush.h>
#include <asm/hardware/cache-l2x0.h>
-#include <mach/iomap.h>
-#include <mach/irammap.h>
-
+#include "iomap.h"
+#include "irammap.h"
#include "reset.h"
#include "fuse.h"
diff --git a/arch/arm/mach-tegra/sleep-t20.S b/arch/arm/mach-tegra/sleep-t20.S
index a36ae41..72ce709 100644
--- a/arch/arm/mach-tegra/sleep-t20.S
+++ b/arch/arm/mach-tegra/sleep-t20.S
@@ -22,8 +22,6 @@
#include <asm/assembler.h>
-#include <mach/iomap.h>
-
#include "sleep.h"
#include "flowctrl.h"
diff --git a/arch/arm/mach-tegra/sleep-t30.S b/arch/arm/mach-tegra/sleep-t30.S
index 777d9ce..be7614b7 100644
--- a/arch/arm/mach-tegra/sleep-t30.S
+++ b/arch/arm/mach-tegra/sleep-t30.S
@@ -18,8 +18,6 @@
#include <asm/assembler.h>
-#include <mach/iomap.h>
-
#include "sleep.h"
#include "flowctrl.h"
diff --git a/arch/arm/mach-tegra/sleep.S b/arch/arm/mach-tegra/sleep.S
index ea81554..08e9481 100644
--- a/arch/arm/mach-tegra/sleep.S
+++ b/arch/arm/mach-tegra/sleep.S
@@ -26,7 +26,7 @@
#include <asm/assembler.h>
-#include <mach/iomap.h>
+#include "iomap.h"
#include "flowctrl.h"
#include "sleep.h"
diff --git a/arch/arm/mach-tegra/sleep.h b/arch/arm/mach-tegra/sleep.h
index e25a7cd..4889b28 100644
--- a/arch/arm/mach-tegra/sleep.h
+++ b/arch/arm/mach-tegra/sleep.h
@@ -17,7 +17,7 @@
#ifndef __MACH_TEGRA_SLEEP_H
#define __MACH_TEGRA_SLEEP_H
-#include <mach/iomap.h>
+#include "iomap.h"
#define TEGRA_ARM_PERIF_VIRT (TEGRA_ARM_PERIF_BASE - IO_CPU_PHYS \
+ IO_CPU_VIRT)
diff --git a/arch/arm/mach-tegra/tegra20_clocks.c b/arch/arm/mach-tegra/tegra20_clocks.c
index deb873f..4eb6bc8 100644
--- a/arch/arm/mach-tegra/tegra20_clocks.c
+++ b/arch/arm/mach-tegra/tegra20_clocks.c
@@ -27,10 +27,9 @@
#include <linux/clkdev.h>
#include <linux/clk.h>
-#include <mach/iomap.h>
-
#include "clock.h"
#include "fuse.h"
+#include "iomap.h"
#include "tegra2_emc.h"
#include "tegra_cpu_car.h"
diff --git a/arch/arm/mach-tegra/tegra20_clocks_data.c b/arch/arm/mach-tegra/tegra20_clocks_data.c
index 8d398a3..9615ee3 100644
--- a/arch/arm/mach-tegra/tegra20_clocks_data.c
+++ b/arch/arm/mach-tegra/tegra20_clocks_data.c
@@ -27,8 +27,6 @@
#include <linux/io.h>
#include <linux/clk.h>
-#include <mach/iomap.h>
-
#include "clock.h"
#include "fuse.h"
#include "tegra2_emc.h"
diff --git a/arch/arm/mach-tegra/tegra2_emc.c b/arch/arm/mach-tegra/tegra2_emc.c
index 5070d83..837c7b9 100644
--- a/arch/arm/mach-tegra/tegra2_emc.c
+++ b/arch/arm/mach-tegra/tegra2_emc.c
@@ -25,8 +25,6 @@
#include <linux/platform_device.h>
#include <linux/platform_data/tegra_emc.h>
-#include <mach/iomap.h>
-
#include "tegra2_emc.h"
#include "fuse.h"
diff --git a/arch/arm/mach-tegra/tegra30_clocks.c b/arch/arm/mach-tegra/tegra30_clocks.c
index e9de5df..000239d 100644
--- a/arch/arm/mach-tegra/tegra30_clocks.c
+++ b/arch/arm/mach-tegra/tegra30_clocks.c
@@ -31,10 +31,9 @@
#include <asm/clkdev.h>
-#include <mach/iomap.h>
-
#include "clock.h"
#include "fuse.h"
+#include "iomap.h"
#include "tegra_cpu_car.h"
#define USE_PLL_LOCK_BITS 0
diff --git a/arch/arm/mach-tegra/timer.c b/arch/arm/mach-tegra/timer.c
index d3b8c8e..6ff5035 100644
--- a/arch/arm/mach-tegra/timer.c
+++ b/arch/arm/mach-tegra/timer.c
@@ -31,11 +31,11 @@
#include <asm/smp_twd.h>
#include <asm/sched_clock.h>
-#include <mach/iomap.h>
#include <mach/irqs.h>
#include "board.h"
#include "clock.h"
+#include "iomap.h"
#define RTC_SECONDS 0x08
#define RTC_SHADOW_SECONDS 0x0c
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index b8efac4..d8632eb 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -82,8 +82,6 @@
static void __init u300_map_io(void)
{
iotable_init(u300_io_desc, ARRAY_SIZE(u300_io_desc));
- /* We enable a real big DMA buffer if need be. */
- init_consistent_dma_size(SZ_4M);
}
/*
diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c
index 2236cbd..1f3fbc2 100644
--- a/arch/arm/mach-ux500/cpu.c
+++ b/arch/arm/mach-ux500/cpu.c
@@ -16,6 +16,7 @@
#include <linux/stat.h>
#include <linux/of.h>
#include <linux/of_irq.h>
+#include <linux/irq.h>
#include <linux/platform_data/clk-ux500.h>
#include <asm/hardware/gic.h>
diff --git a/arch/arm/mach-vt8500/include/mach/hardware.h b/arch/arm/mach-vt8500/include/mach/hardware.h
deleted file mode 100644
index db4163f..0000000
--- a/arch/arm/mach-vt8500/include/mach/hardware.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/* arch/arm/mach-vt8500/include/mach/hardware.h
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
diff --git a/arch/arm/mach-vt8500/include/mach/i8042.h b/arch/arm/mach-vt8500/include/mach/i8042.h
deleted file mode 100644
index cd7143c..0000000
--- a/arch/arm/mach-vt8500/include/mach/i8042.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* arch/arm/mach-vt8500/include/mach/i8042.h
- *
- * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-extern unsigned long wmt_i8042_base __initdata;
-extern int wmt_i8042_kbd_irq;
-extern int wmt_i8042_aux_irq;
diff --git a/arch/arm/mach-vt8500/include/mach/restart.h b/arch/arm/mach-vt8500/include/mach/restart.h
deleted file mode 100644
index 7389795..0000000
--- a/arch/arm/mach-vt8500/include/mach/restart.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* linux/arch/arm/mach-vt8500/restart.h
- *
- * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-void vt8500_setup_restart(void);
-void vt8500_restart(char mode, const char *cmd);
diff --git a/arch/arm/mach-vt8500/timer.c b/arch/arm/mach-vt8500/timer.c
index 050e183..3dd21a4 100644
--- a/arch/arm/mach-vt8500/timer.c
+++ b/arch/arm/mach-vt8500/timer.c
@@ -1,5 +1,5 @@
/*
- * arch/arm/mach-vt8500/timer_dt.c
+ * arch/arm/mach-vt8500/timer.c
*
* Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
* Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
diff --git a/arch/arm/mach-vt8500/vt8500.c b/arch/arm/mach-vt8500/vt8500.c
index 8d3871f..a5bd286 100644
--- a/arch/arm/mach-vt8500/vt8500.c
+++ b/arch/arm/mach-vt8500/vt8500.c
@@ -31,8 +31,6 @@
#include <linux/of_irq.h>
#include <linux/of_platform.h>
-#include <mach/restart.h>
-
#include "common.h"
#define LEGACY_GPIO_BASE 0xD8110000
diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c
index ab5cfdd..ba8d14f 100644
--- a/arch/arm/mach-zynq/common.c
+++ b/arch/arm/mach-zynq/common.c
@@ -31,7 +31,6 @@
#include <asm/hardware/cache-l2x0.h>
#include <mach/zynq_soc.h>
-#include <mach/clkdev.h>
#include "common.h"
static struct of_device_id zynq_of_bus_ids[] __initdata = {
@@ -45,22 +44,25 @@
*/
static void __init xilinx_init_machine(void)
{
-#ifdef CONFIG_CACHE_L2X0
/*
* 64KB way size, 8-way associativity, parity disabled
*/
- l2x0_init(PL310_L2CC_BASE, 0x02060000, 0xF0F0FFFF);
-#endif
+ l2x0_of_init(0x02060000, 0xF0F0FFFF);
of_platform_bus_probe(NULL, zynq_of_bus_ids, NULL);
}
+static struct of_device_id irq_match[] __initdata = {
+ { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
+ { }
+};
+
/**
* xilinx_irq_init() - Interrupt controller initialization for the GIC.
*/
static void __init xilinx_irq_init(void)
{
- gic_init(0, 29, SCU_GIC_DIST_BASE, SCU_GIC_CPU_BASE);
+ of_irq_init(irq_match);
}
/* The minimum devices needed to be mapped before the VM system is up and
@@ -71,17 +73,12 @@
{
.virtual = TTC0_VIRT,
.pfn = __phys_to_pfn(TTC0_PHYS),
- .length = SZ_4K,
+ .length = TTC0_SIZE,
.type = MT_DEVICE,
}, {
.virtual = SCU_PERIPH_VIRT,
.pfn = __phys_to_pfn(SCU_PERIPH_PHYS),
- .length = SZ_8K,
- .type = MT_DEVICE,
- }, {
- .virtual = PL310_L2CC_VIRT,
- .pfn = __phys_to_pfn(PL310_L2CC_PHYS),
- .length = SZ_4K,
+ .length = SCU_PERIPH_SIZE,
.type = MT_DEVICE,
},
@@ -89,7 +86,7 @@
{
.virtual = UART0_VIRT,
.pfn = __phys_to_pfn(UART0_PHYS),
- .length = SZ_4K,
+ .length = UART0_SIZE,
.type = MT_DEVICE,
},
#endif
diff --git a/arch/arm/mach-zynq/include/mach/clkdev.h b/arch/arm/mach-zynq/include/mach/clkdev.h
deleted file mode 100644
index c6e73d8..0000000
--- a/arch/arm/mach-zynq/include/mach/clkdev.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * arch/arm/mach-zynq/include/mach/clkdev.h
- *
- * Copyright (C) 2011 Xilinx, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __MACH_CLKDEV_H__
-#define __MACH_CLKDEV_H__
-
-#include <plat/clock.h>
-
-struct clk {
- unsigned long rate;
- const struct clk_ops *ops;
- const struct icst_params *params;
- void __iomem *vcoreg;
-};
-
-#define __clk_get(clk) ({ 1; })
-#define __clk_put(clk) do { } while (0)
-
-#endif
diff --git a/arch/arm/mach-zynq/include/mach/zynq_soc.h b/arch/arm/mach-zynq/include/mach/zynq_soc.h
index d0d3f8f..1b8bf0e 100644
--- a/arch/arm/mach-zynq/include/mach/zynq_soc.h
+++ b/arch/arm/mach-zynq/include/mach/zynq_soc.h
@@ -15,33 +15,32 @@
#ifndef __MACH_XILINX_SOC_H__
#define __MACH_XILINX_SOC_H__
+#include <asm/pgtable.h>
+
#define PERIPHERAL_CLOCK_RATE 2500000
-/* For now, all mappings are flat (physical = virtual)
+/* Static peripheral mappings are mapped at the top of the vmalloc region. The
+ * early uart mapping causes intermediate problems/failure at certain
+ * addresses, including the very top of the vmalloc region. Map it at an
+ * address that is known to work.
*/
-#define UART0_PHYS 0xE0000000
-#define UART0_VIRT UART0_PHYS
+#define UART0_PHYS 0xE0000000
+#define UART0_SIZE SZ_4K
+#define UART0_VIRT 0xF0001000
-#define TTC0_PHYS 0xF8001000
-#define TTC0_VIRT TTC0_PHYS
+#define TTC0_PHYS 0xF8001000
+#define TTC0_SIZE SZ_4K
+#define TTC0_VIRT (VMALLOC_END - TTC0_SIZE)
-#define PL310_L2CC_PHYS 0xF8F02000
-#define PL310_L2CC_VIRT PL310_L2CC_PHYS
-
-#define SCU_PERIPH_PHYS 0xF8F00000
-#define SCU_PERIPH_VIRT SCU_PERIPH_PHYS
+#define SCU_PERIPH_PHYS 0xF8F00000
+#define SCU_PERIPH_SIZE SZ_8K
+#define SCU_PERIPH_VIRT (TTC0_VIRT - SCU_PERIPH_SIZE)
/* The following are intended for the devices that are mapped early */
#define TTC0_BASE IOMEM(TTC0_VIRT)
#define SCU_PERIPH_BASE IOMEM(SCU_PERIPH_VIRT)
-#define SCU_GIC_CPU_BASE (SCU_PERIPH_BASE + 0x100)
-#define SCU_GIC_DIST_BASE (SCU_PERIPH_BASE + 0x1000)
-#define PL310_L2CC_BASE IOMEM(PL310_L2CC_VIRT)
-/*
- * Mandatory for CONFIG_LL_DEBUG, UART is mapped virtual = physical
- */
#define LL_UART_PADDR UART0_PHYS
#define LL_UART_VADDR UART0_VIRT
diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c
index b9f60eb..b820eda 100644
--- a/arch/arm/mm/alignment.c
+++ b/arch/arm/mm/alignment.c
@@ -745,7 +745,7 @@
static int
do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
{
- union offset_union offset;
+ union offset_union uninitialized_var(offset);
unsigned long instr = 0, instrptr;
int (*handler)(unsigned long addr, unsigned long instr, struct pt_regs *regs);
unsigned int type;
@@ -856,8 +856,10 @@
if (thumb2_32b) {
offset.un = 0;
handler = do_alignment_t32_to_handler(&instr, regs, &offset);
- } else
+ } else {
+ offset.un = 0;
handler = do_alignment_ldmstm;
+ }
break;
default:
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index 477a2d2..58bc3e4 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -610,7 +610,7 @@
gfp_t gfp, pgprot_t prot, bool is_coherent, const void *caller)
{
u64 mask = get_coherent_dma_mask(dev);
- struct page *page;
+ struct page *page = NULL;
void *addr;
#ifdef CONFIG_DMA_API_DEBUG
diff --git a/arch/arm/mm/vmregion.h b/arch/arm/mm/vmregion.h
index bf312c3..0f5a5f2 100644
--- a/arch/arm/mm/vmregion.h
+++ b/arch/arm/mm/vmregion.h
@@ -17,7 +17,6 @@
struct list_head vm_list;
unsigned long vm_start;
unsigned long vm_end;
- void *priv;
int vm_active;
const void *caller;
};
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
deleted file mode 100644
index 88e1e2e..0000000
--- a/arch/arm/plat-mxc/Kconfig
+++ /dev/null
@@ -1,89 +0,0 @@
-if ARCH_MXC
-
-source "arch/arm/plat-mxc/devices/Kconfig"
-
-menu "Freescale MXC Implementations"
-
-choice
- prompt "Freescale CPU family:"
- default ARCH_IMX_V6_V7
-
-config ARCH_IMX_V4_V5
- bool "i.MX1, i.MX21, i.MX25, i.MX27"
- select ARM_PATCH_PHYS_VIRT
- select AUTO_ZRELADDR if !ZBOOT_ROM
- help
- This enables support for systems based on the Freescale i.MX ARMv4
- and ARMv5 SoCs
-
-config ARCH_IMX_V6_V7
- bool "i.MX3, i.MX5, i.MX6"
- select ARM_PATCH_PHYS_VIRT
- select AUTO_ZRELADDR if !ZBOOT_ROM
- select MIGHT_HAVE_CACHE_L2X0
- help
- This enables support for systems based on the Freescale i.MX3, i.MX5
- and i.MX6 family.
-
-endchoice
-
-source "arch/arm/mach-imx/Kconfig"
-
-endmenu
-
-config MXC_IRQ_PRIOR
- bool "Use IRQ priority"
- help
- Select this if you want to use prioritized IRQ handling.
- This feature prevents higher priority ISR to be interrupted
- by lower priority IRQ even IRQF_DISABLED flag is not set.
- This may be useful in embedded applications, where are strong
- requirements for timing.
- Say N here, unless you have a specialized requirement.
-
-config MXC_TZIC
- bool
-
-config MXC_AVIC
- bool
-
-config MXC_DEBUG_BOARD
- bool "Enable MXC debug board(for 3-stack)"
- help
- The debug board is an integral part of the MXC 3-stack(PDK)
- platforms, it can be attached or removed from the peripheral
- board. On debug board, several debug devices(ethernet, UART,
- buttons, LEDs and JTAG) are implemented. Between the MCU and
- these devices, a CPLD is added as a bridge which performs
- data/address de-multiplexing and decode, signal level shift,
- interrupt control and various board functions.
-
-config HAVE_EPIT
- bool
-
-config MXC_USE_EPIT
- bool "Use EPIT instead of GPT"
- depends on HAVE_EPIT
- help
- Use EPIT as the system timer on systems that have it. Normally you
- don't have a reason to do so as the EPIT has the same features and
- uses the same clocks as the GPT. Anyway, on some systems the GPT
- may be in use for other purposes.
-
-config MXC_ULPI
- bool
-
-config ARCH_HAS_RNGA
- bool
-
-config IMX_HAVE_IOMUX_V1
- bool
-
-config ARCH_MXC_IOMUX_V3
- bool
-
-config IRAM_ALLOC
- bool
- select GENERIC_ALLOCATOR
-
-endif
diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile
deleted file mode 100644
index 149237e2..0000000
--- a/arch/arm/plat-mxc/Makefile
+++ /dev/null
@@ -1,24 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Common support
-obj-y := time.o devices.o cpu.o system.o irq-common.o
-
-obj-$(CONFIG_MXC_TZIC) += tzic.o
-obj-$(CONFIG_MXC_AVIC) += avic.o
-
-obj-$(CONFIG_IMX_HAVE_IOMUX_V1) += iomux-v1.o
-obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o
-obj-$(CONFIG_IRAM_ALLOC) += iram_alloc.o
-obj-$(CONFIG_MXC_ULPI) += ulpi.o
-obj-$(CONFIG_MXC_USE_EPIT) += epit.o
-obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o
-obj-$(CONFIG_CPU_FREQ_IMX) += cpufreq.o
-obj-$(CONFIG_CPU_IDLE) += cpuidle.o
-ifdef CONFIG_SND_IMX_SOC
-obj-y += ssi-fiq.o
-obj-y += ssi-fiq-ksym.o
-endif
-
-obj-y += devices/
diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S
deleted file mode 100644
index 761e45f..0000000
--- a/arch/arm/plat-mxc/include/mach/debug-macro.S
+++ /dev/null
@@ -1,51 +0,0 @@
-/* arch/arm/mach-imx/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- * Copyright (C) 1994-1999 Russell King
- * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#include <mach/hardware.h>
-
-#ifdef CONFIG_DEBUG_IMX1_UART
-#define UART_PADDR MX1_UART1_BASE_ADDR
-#elif defined (CONFIG_DEBUG_IMX25_UART)
-#define UART_PADDR MX25_UART1_BASE_ADDR
-#elif defined (CONFIG_DEBUG_IMX21_IMX27_UART)
-#define UART_PADDR MX2x_UART1_BASE_ADDR
-#elif defined (CONFIG_DEBUG_IMX31_IMX35_UART)
-#define UART_PADDR MX3x_UART1_BASE_ADDR
-#elif defined (CONFIG_DEBUG_IMX51_UART)
-#define UART_PADDR MX51_UART1_BASE_ADDR
-#elif defined (CONFIG_DEBUG_IMX50_IMX53_UART)
-#define UART_PADDR MX53_UART1_BASE_ADDR
-#elif defined (CONFIG_DEBUG_IMX6Q_UART2)
-#define UART_PADDR MX6Q_UART2_BASE_ADDR
-#elif defined (CONFIG_DEBUG_IMX6Q_UART4)
-#define UART_PADDR MX6Q_UART4_BASE_ADDR
-#endif
-
-#define UART_VADDR IMX_IO_ADDRESS(UART_PADDR)
-
- .macro addruart, rp, rv, tmp
- ldr \rp, =UART_PADDR @ physical
- ldr \rv, =UART_VADDR @ virtual
- .endm
-
- .macro senduart,rd,rx
- str \rd, [\rx, #0x40] @ TXDATA
- .endm
-
- .macro waituart,rd,rx
- .endm
-
- .macro busyuart,rd,rx
-1002: ldr \rd, [\rx, #0x98] @ SR2
- tst \rd, #1 << 3 @ TXDC
- beq 1002b @ wait until transmit done
- .endm
diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h
deleted file mode 100644
index d73f5e8..0000000
--- a/arch/arm/plat-mxc/include/mach/irqs.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MXC_IRQS_H__
-#define __ASM_ARCH_MXC_IRQS_H__
-
-extern int imx_irq_set_priority(unsigned char irq, unsigned char prio);
-
-/* all normal IRQs can be FIQs */
-#define FIQ_START 0
-/* switch between IRQ and FIQ */
-extern int mxc_set_irq_fiq(unsigned int irq, unsigned int type);
-
-#endif /* __ASM_ARCH_MXC_IRQS_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/timex.h b/arch/arm/plat-mxc/include/mach/timex.h
deleted file mode 100644
index 10343d1..0000000
--- a/arch/arm/plat-mxc/include/mach/timex.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Copyright (C) 1999 ARM Limited
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_MXC_TIMEX_H__
-#define __ASM_ARCH_MXC_TIMEX_H__
-
-/* Bogus value */
-#define CLOCK_TICK_RATE 12345678
-
-#endif /* __ASM_ARCH_MXC_TIMEX_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h
deleted file mode 100644
index 477971b..0000000
--- a/arch/arm/plat-mxc/include/mach/uncompress.h
+++ /dev/null
@@ -1,132 +0,0 @@
-/*
- * arch/arm/plat-mxc/include/mach/uncompress.h
- *
- * Copyright (C) 1999 ARM Limited
- * Copyright (C) Shane Nay (shane@minirl.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-#ifndef __ASM_ARCH_MXC_UNCOMPRESS_H__
-#define __ASM_ARCH_MXC_UNCOMPRESS_H__
-
-#define __MXC_BOOT_UNCOMPRESS
-
-#include <asm/mach-types.h>
-
-unsigned long uart_base;
-
-#define UART(x) (*(volatile unsigned long *)(uart_base + (x)))
-
-#define USR2 0x98
-#define USR2_TXFE (1<<14)
-#define TXR 0x40
-#define UCR1 0x80
-#define UCR1_UARTEN 1
-
-/*
- * The following code assumes the serial port has already been
- * initialized by the bootloader. We search for the first enabled
- * port in the most probable order. If you didn't setup a port in
- * your bootloader then nothing will appear (which might be desired).
- *
- * This does not append a newline
- */
-
-static void putc(int ch)
-{
- if (!uart_base)
- return;
- if (!(UART(UCR1) & UCR1_UARTEN))
- return;
-
- while (!(UART(USR2) & USR2_TXFE))
- barrier();
-
- UART(TXR) = ch;
-}
-
-static inline void flush(void)
-{
-}
-
-#define MX1_UART1_BASE_ADDR 0x00206000
-#define MX25_UART1_BASE_ADDR 0x43f90000
-#define MX2X_UART1_BASE_ADDR 0x1000a000
-#define MX3X_UART1_BASE_ADDR 0x43F90000
-#define MX3X_UART2_BASE_ADDR 0x43F94000
-#define MX3X_UART5_BASE_ADDR 0x43FB4000
-#define MX51_UART1_BASE_ADDR 0x73fbc000
-#define MX50_UART1_BASE_ADDR 0x53fbc000
-#define MX53_UART1_BASE_ADDR 0x53fbc000
-
-static __inline__ void __arch_decomp_setup(unsigned long arch_id)
-{
- switch (arch_id) {
- case MACH_TYPE_MX1ADS:
- case MACH_TYPE_SCB9328:
- uart_base = MX1_UART1_BASE_ADDR;
- break;
- case MACH_TYPE_MX25_3DS:
- uart_base = MX25_UART1_BASE_ADDR;
- break;
- case MACH_TYPE_IMX27LITE:
- case MACH_TYPE_MX27_3DS:
- case MACH_TYPE_MX27ADS:
- case MACH_TYPE_PCM038:
- case MACH_TYPE_MX21ADS:
- case MACH_TYPE_PCA100:
- case MACH_TYPE_MXT_TD60:
- case MACH_TYPE_IMX27IPCAM:
- uart_base = MX2X_UART1_BASE_ADDR;
- break;
- case MACH_TYPE_MX31LITE:
- case MACH_TYPE_ARMADILLO5X0:
- case MACH_TYPE_MX31MOBOARD:
- case MACH_TYPE_QONG:
- case MACH_TYPE_MX31_3DS:
- case MACH_TYPE_PCM037:
- case MACH_TYPE_MX31ADS:
- case MACH_TYPE_MX35_3DS:
- case MACH_TYPE_PCM043:
- case MACH_TYPE_LILLY1131:
- case MACH_TYPE_VPR200:
- case MACH_TYPE_EUKREA_CPUIMX35SD:
- uart_base = MX3X_UART1_BASE_ADDR;
- break;
- case MACH_TYPE_MAGX_ZN5:
- uart_base = MX3X_UART2_BASE_ADDR;
- break;
- case MACH_TYPE_BUG:
- uart_base = MX3X_UART5_BASE_ADDR;
- break;
- case MACH_TYPE_MX51_BABBAGE:
- case MACH_TYPE_EUKREA_CPUIMX51SD:
- case MACH_TYPE_MX51_3DS:
- uart_base = MX51_UART1_BASE_ADDR;
- break;
- case MACH_TYPE_MX50_RDP:
- uart_base = MX50_UART1_BASE_ADDR;
- break;
- case MACH_TYPE_MX53_EVK:
- case MACH_TYPE_MX53_LOCO:
- case MACH_TYPE_MX53_SMD:
- case MACH_TYPE_MX53_ARD:
- uart_base = MX53_UART1_BASE_ADDR;
- break;
- default:
- break;
- }
-}
-
-#define arch_decomp_setup() __arch_decomp_setup(arch_id)
-#define arch_decomp_wdog()
-
-#endif /* __ASM_ARCH_MXC_UNCOMPRESS_H__ */
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index 7cd56ed..82fcb20 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -26,6 +26,7 @@
select CLKDEV_LOOKUP
select GENERIC_IRQ_CHIP
select OMAP_DM_TIMER
+ select PINCTRL
select PROC_DEVICETREE if PROC_FS
select SPARSE_IRQ
select USE_OF
diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile
index dacaee0..8d88584 100644
--- a/arch/arm/plat-omap/Makefile
+++ b/arch/arm/plat-omap/Makefile
@@ -3,13 +3,12 @@
#
# Common support
-obj-y := common.o sram.o clock.o dma.o fb.o counter_32k.o
+obj-y := sram.o dma.o fb.o counter_32k.o
obj-m :=
obj-n :=
obj- :=
# omap_device support (OMAP2+ only at the moment)
-obj-$(CONFIG_ARCH_OMAP2PLUS) += omap_device.o
obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o
obj-$(CONFIG_OMAP_DEBUG_DEVICES) += debug-devices.o
@@ -20,4 +19,3 @@
# OMAP mailbox framework
obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox.o
-obj-$(CONFIG_OMAP_PM_NOOP) += omap-pm-noop.o
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
deleted file mode 100644
index 9d7ac20..0000000
--- a/arch/arm/plat-omap/clock.c
+++ /dev/null
@@ -1,544 +0,0 @@
-/*
- * linux/arch/arm/plat-omap/clock.c
- *
- * Copyright (C) 2004 - 2008 Nokia corporation
- * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
- *
- * Modified for omap shared clock framework by Tony Lindgren <tony@atomide.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/export.h>
-#include <linux/err.h>
-#include <linux/string.h>
-#include <linux/clk.h>
-#include <linux/mutex.h>
-#include <linux/cpufreq.h>
-#include <linux/io.h>
-
-#include <plat/clock.h>
-
-static LIST_HEAD(clocks);
-static DEFINE_MUTEX(clocks_mutex);
-static DEFINE_SPINLOCK(clockfw_lock);
-
-static struct clk_functions *arch_clock;
-
-/*
- * Standard clock functions defined in include/linux/clk.h
- */
-
-int clk_enable(struct clk *clk)
-{
- unsigned long flags;
- int ret;
-
- if (clk == NULL || IS_ERR(clk))
- return -EINVAL;
-
- if (!arch_clock || !arch_clock->clk_enable)
- return -EINVAL;
-
- spin_lock_irqsave(&clockfw_lock, flags);
- ret = arch_clock->clk_enable(clk);
- spin_unlock_irqrestore(&clockfw_lock, flags);
-
- return ret;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
- unsigned long flags;
-
- if (clk == NULL || IS_ERR(clk))
- return;
-
- if (!arch_clock || !arch_clock->clk_disable)
- return;
-
- spin_lock_irqsave(&clockfw_lock, flags);
- if (clk->usecount == 0) {
- pr_err("Trying disable clock %s with 0 usecount\n",
- clk->name);
- WARN_ON(1);
- goto out;
- }
-
- arch_clock->clk_disable(clk);
-
-out:
- spin_unlock_irqrestore(&clockfw_lock, flags);
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
- unsigned long flags;
- unsigned long ret;
-
- if (clk == NULL || IS_ERR(clk))
- return 0;
-
- spin_lock_irqsave(&clockfw_lock, flags);
- ret = clk->rate;
- spin_unlock_irqrestore(&clockfw_lock, flags);
-
- return ret;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-/*
- * Optional clock functions defined in include/linux/clk.h
- */
-
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
- unsigned long flags;
- long ret;
-
- if (clk == NULL || IS_ERR(clk))
- return 0;
-
- if (!arch_clock || !arch_clock->clk_round_rate)
- return 0;
-
- spin_lock_irqsave(&clockfw_lock, flags);
- ret = arch_clock->clk_round_rate(clk, rate);
- spin_unlock_irqrestore(&clockfw_lock, flags);
-
- return ret;
-}
-EXPORT_SYMBOL(clk_round_rate);
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
- unsigned long flags;
- int ret = -EINVAL;
-
- if (clk == NULL || IS_ERR(clk))
- return ret;
-
- if (!arch_clock || !arch_clock->clk_set_rate)
- return ret;
-
- spin_lock_irqsave(&clockfw_lock, flags);
- ret = arch_clock->clk_set_rate(clk, rate);
- if (ret == 0)
- propagate_rate(clk);
- spin_unlock_irqrestore(&clockfw_lock, flags);
-
- return ret;
-}
-EXPORT_SYMBOL(clk_set_rate);
-
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
- unsigned long flags;
- int ret = -EINVAL;
-
- if (clk == NULL || IS_ERR(clk) || parent == NULL || IS_ERR(parent))
- return ret;
-
- if (!arch_clock || !arch_clock->clk_set_parent)
- return ret;
-
- spin_lock_irqsave(&clockfw_lock, flags);
- if (clk->usecount == 0) {
- ret = arch_clock->clk_set_parent(clk, parent);
- if (ret == 0)
- propagate_rate(clk);
- } else
- ret = -EBUSY;
- spin_unlock_irqrestore(&clockfw_lock, flags);
-
- return ret;
-}
-EXPORT_SYMBOL(clk_set_parent);
-
-struct clk *clk_get_parent(struct clk *clk)
-{
- return clk->parent;
-}
-EXPORT_SYMBOL(clk_get_parent);
-
-/*
- * OMAP specific clock functions shared between omap1 and omap2
- */
-
-int __initdata mpurate;
-
-/*
- * By default we use the rate set by the bootloader.
- * You can override this with mpurate= cmdline option.
- */
-static int __init omap_clk_setup(char *str)
-{
- get_option(&str, &mpurate);
-
- if (!mpurate)
- return 1;
-
- if (mpurate < 1000)
- mpurate *= 1000000;
-
- return 1;
-}
-__setup("mpurate=", omap_clk_setup);
-
-/* Used for clocks that always have same value as the parent clock */
-unsigned long followparent_recalc(struct clk *clk)
-{
- return clk->parent->rate;
-}
-
-/*
- * Used for clocks that have the same value as the parent clock,
- * divided by some factor
- */
-unsigned long omap_fixed_divisor_recalc(struct clk *clk)
-{
- WARN_ON(!clk->fixed_div);
-
- return clk->parent->rate / clk->fixed_div;
-}
-
-void clk_reparent(struct clk *child, struct clk *parent)
-{
- list_del_init(&child->sibling);
- if (parent)
- list_add(&child->sibling, &parent->children);
- child->parent = parent;
-
- /* now do the debugfs renaming to reattach the child
- to the proper parent */
-}
-
-/* Propagate rate to children */
-void propagate_rate(struct clk *tclk)
-{
- struct clk *clkp;
-
- list_for_each_entry(clkp, &tclk->children, sibling) {
- if (clkp->recalc)
- clkp->rate = clkp->recalc(clkp);
- propagate_rate(clkp);
- }
-}
-
-static LIST_HEAD(root_clks);
-
-/**
- * recalculate_root_clocks - recalculate and propagate all root clocks
- *
- * Recalculates all root clocks (clocks with no parent), which if the
- * clock's .recalc is set correctly, should also propagate their rates.
- * Called at init.
- */
-void recalculate_root_clocks(void)
-{
- struct clk *clkp;
-
- list_for_each_entry(clkp, &root_clks, sibling) {
- if (clkp->recalc)
- clkp->rate = clkp->recalc(clkp);
- propagate_rate(clkp);
- }
-}
-
-/**
- * clk_preinit - initialize any fields in the struct clk before clk init
- * @clk: struct clk * to initialize
- *
- * Initialize any struct clk fields needed before normal clk initialization
- * can run. No return value.
- */
-void clk_preinit(struct clk *clk)
-{
- INIT_LIST_HEAD(&clk->children);
-}
-
-int clk_register(struct clk *clk)
-{
- if (clk == NULL || IS_ERR(clk))
- return -EINVAL;
-
- /*
- * trap out already registered clocks
- */
- if (clk->node.next || clk->node.prev)
- return 0;
-
- mutex_lock(&clocks_mutex);
- if (clk->parent)
- list_add(&clk->sibling, &clk->parent->children);
- else
- list_add(&clk->sibling, &root_clks);
-
- list_add(&clk->node, &clocks);
- if (clk->init)
- clk->init(clk);
- mutex_unlock(&clocks_mutex);
-
- return 0;
-}
-EXPORT_SYMBOL(clk_register);
-
-void clk_unregister(struct clk *clk)
-{
- if (clk == NULL || IS_ERR(clk))
- return;
-
- mutex_lock(&clocks_mutex);
- list_del(&clk->sibling);
- list_del(&clk->node);
- mutex_unlock(&clocks_mutex);
-}
-EXPORT_SYMBOL(clk_unregister);
-
-void clk_enable_init_clocks(void)
-{
- struct clk *clkp;
-
- list_for_each_entry(clkp, &clocks, node) {
- if (clkp->flags & ENABLE_ON_INIT)
- clk_enable(clkp);
- }
-}
-
-int omap_clk_enable_autoidle_all(void)
-{
- struct clk *c;
- unsigned long flags;
-
- spin_lock_irqsave(&clockfw_lock, flags);
-
- list_for_each_entry(c, &clocks, node)
- if (c->ops->allow_idle)
- c->ops->allow_idle(c);
-
- spin_unlock_irqrestore(&clockfw_lock, flags);
-
- return 0;
-}
-
-int omap_clk_disable_autoidle_all(void)
-{
- struct clk *c;
- unsigned long flags;
-
- spin_lock_irqsave(&clockfw_lock, flags);
-
- list_for_each_entry(c, &clocks, node)
- if (c->ops->deny_idle)
- c->ops->deny_idle(c);
-
- spin_unlock_irqrestore(&clockfw_lock, flags);
-
- return 0;
-}
-
-/*
- * Low level helpers
- */
-static int clkll_enable_null(struct clk *clk)
-{
- return 0;
-}
-
-static void clkll_disable_null(struct clk *clk)
-{
-}
-
-const struct clkops clkops_null = {
- .enable = clkll_enable_null,
- .disable = clkll_disable_null,
-};
-
-/*
- * Dummy clock
- *
- * Used for clock aliases that are needed on some OMAPs, but not others
- */
-struct clk dummy_ck = {
- .name = "dummy",
- .ops = &clkops_null,
-};
-
-/*
- *
- */
-
-#ifdef CONFIG_OMAP_RESET_CLOCKS
-/*
- * Disable any unused clocks left on by the bootloader
- */
-static int __init clk_disable_unused(void)
-{
- struct clk *ck;
- unsigned long flags;
-
- if (!arch_clock || !arch_clock->clk_disable_unused)
- return 0;
-
- pr_info("clock: disabling unused clocks to save power\n");
-
- spin_lock_irqsave(&clockfw_lock, flags);
- list_for_each_entry(ck, &clocks, node) {
- if (ck->ops == &clkops_null)
- continue;
-
- if (ck->usecount > 0 || !ck->enable_reg)
- continue;
-
- arch_clock->clk_disable_unused(ck);
- }
- spin_unlock_irqrestore(&clockfw_lock, flags);
-
- return 0;
-}
-late_initcall(clk_disable_unused);
-late_initcall(omap_clk_enable_autoidle_all);
-#endif
-
-int __init clk_init(struct clk_functions * custom_clocks)
-{
- if (!custom_clocks) {
- pr_err("No custom clock functions registered\n");
- BUG();
- }
-
- arch_clock = custom_clocks;
-
- return 0;
-}
-
-#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
-/*
- * debugfs support to trace clock tree hierarchy and attributes
- */
-
-#include <linux/debugfs.h>
-#include <linux/seq_file.h>
-
-static struct dentry *clk_debugfs_root;
-
-static int clk_dbg_show_summary(struct seq_file *s, void *unused)
-{
- struct clk *c;
- struct clk *pa;
-
- mutex_lock(&clocks_mutex);
- seq_printf(s, "%-30s %-30s %-10s %s\n",
- "clock-name", "parent-name", "rate", "use-count");
-
- list_for_each_entry(c, &clocks, node) {
- pa = c->parent;
- seq_printf(s, "%-30s %-30s %-10lu %d\n",
- c->name, pa ? pa->name : "none", c->rate, c->usecount);
- }
- mutex_unlock(&clocks_mutex);
-
- return 0;
-}
-
-static int clk_dbg_open(struct inode *inode, struct file *file)
-{
- return single_open(file, clk_dbg_show_summary, inode->i_private);
-}
-
-static const struct file_operations debug_clock_fops = {
- .open = clk_dbg_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
-
-static int clk_debugfs_register_one(struct clk *c)
-{
- int err;
- struct dentry *d;
- struct clk *pa = c->parent;
-
- d = debugfs_create_dir(c->name, pa ? pa->dent : clk_debugfs_root);
- if (!d)
- return -ENOMEM;
- c->dent = d;
-
- d = debugfs_create_u8("usecount", S_IRUGO, c->dent, (u8 *)&c->usecount);
- if (!d) {
- err = -ENOMEM;
- goto err_out;
- }
- d = debugfs_create_u32("rate", S_IRUGO, c->dent, (u32 *)&c->rate);
- if (!d) {
- err = -ENOMEM;
- goto err_out;
- }
- d = debugfs_create_x32("flags", S_IRUGO, c->dent, (u32 *)&c->flags);
- if (!d) {
- err = -ENOMEM;
- goto err_out;
- }
- return 0;
-
-err_out:
- debugfs_remove_recursive(c->dent);
- return err;
-}
-
-static int clk_debugfs_register(struct clk *c)
-{
- int err;
- struct clk *pa = c->parent;
-
- if (pa && !pa->dent) {
- err = clk_debugfs_register(pa);
- if (err)
- return err;
- }
-
- if (!c->dent) {
- err = clk_debugfs_register_one(c);
- if (err)
- return err;
- }
- return 0;
-}
-
-static int __init clk_debugfs_init(void)
-{
- struct clk *c;
- struct dentry *d;
- int err;
-
- d = debugfs_create_dir("clock", NULL);
- if (!d)
- return -ENOMEM;
- clk_debugfs_root = d;
-
- list_for_each_entry(c, &clocks, node) {
- err = clk_debugfs_register(c);
- if (err)
- goto err_out;
- }
-
- d = debugfs_create_file("summary", S_IRUGO,
- d, NULL, &debug_clock_fops);
- if (!d)
- return -ENOMEM;
-
- return 0;
-err_out:
- debugfs_remove_recursive(clk_debugfs_root);
- return err;
-}
-late_initcall(clk_debugfs_init);
-
-#endif /* defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) */
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
deleted file mode 100644
index 111315a..0000000
--- a/arch/arm/plat-omap/common.c
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * linux/arch/arm/plat-omap/common.c
- *
- * Code common to all OMAP machines.
- * The file is created by Tony Lindgren <tony@atomide.com>
- *
- * Copyright (C) 2009 Texas Instruments
- * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/dma-mapping.h>
-
-#include <plat/common.h>
-#include <plat/vram.h>
-#include <linux/platform_data/dsp-omap.h>
-#include <plat/dma.h>
-
-#include <plat/omap-secure.h>
-
-void __init omap_reserve(void)
-{
- omap_vram_reserve_sdram_memblock();
- omap_dsp_reserve_sdram_memblock();
- omap_secure_ram_reserve_memblock();
- omap_barrier_reserve_memblock();
-}
-
-void __init omap_init_consistent_dma_size(void)
-{
-#ifdef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE
- init_consistent_dma_size(CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE << 20);
-#endif
-}
-
-/*
- * Stub function for OMAP2 so that common files
- * continue to build when custom builds are used
- */
-int __weak omap_secure_ram_reserve_memblock(void)
-{
- return 0;
-}
diff --git a/arch/arm/plat-omap/counter_32k.c b/arch/arm/plat-omap/counter_32k.c
index 87ba8dd..f3771cd 100644
--- a/arch/arm/plat-omap/counter_32k.c
+++ b/arch/arm/plat-omap/counter_32k.c
@@ -22,9 +22,6 @@
#include <asm/mach/time.h>
#include <asm/sched_clock.h>
-#include <plat/common.h>
-#include <plat/clock.h>
-
/* OMAP2_32KSYNCNT_CR_OFF: offset of 32ksync counter register */
#define OMAP2_32KSYNCNT_REV_OFF 0x0
#define OMAP2_32KSYNCNT_REV_SCHEME (0x3 << 30)
diff --git a/arch/arm/plat-omap/debug-devices.c b/arch/arm/plat-omap/debug-devices.c
index 5a4678e..a609e21 100644
--- a/arch/arm/plat-omap/debug-devices.c
+++ b/arch/arm/plat-omap/debug-devices.c
@@ -15,8 +15,7 @@
#include <linux/io.h>
#include <linux/smc91x.h>
-#include <mach/hardware.h>
-#include "../mach-omap2/debug-devices.h"
+#include <plat/debug-devices.h>
/* Many OMAP development platforms reuse the same "debug board"; these
* platforms include H2, H3, H4, and Perseus2.
diff --git a/arch/arm/plat-omap/debug-leds.c b/arch/arm/plat-omap/debug-leds.c
index ea29bbe..aa7ebc6 100644
--- a/arch/arm/plat-omap/debug-leds.c
+++ b/arch/arm/plat-omap/debug-leds.c
@@ -17,16 +17,33 @@
#include <linux/platform_data/gpio-omap.h>
#include <linux/slab.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
-#include <plat/fpga.h>
-
/* Many OMAP development platforms reuse the same "debug board"; these
* platforms include H2, H3, H4, and Perseus2. There are 16 LEDs on the
* debug board (all green), accessed through FPGA registers.
*/
+/* NOTE: most boards don't have a static mapping for the FPGA ... */
+struct h2p2_dbg_fpga {
+ /* offset 0x00 */
+ u16 smc91x[8];
+ /* offset 0x10 */
+ u16 fpga_rev;
+ u16 board_rev;
+ u16 gpio_outputs;
+ u16 leds;
+ /* offset 0x18 */
+ u16 misc_inputs;
+ u16 lan_status;
+ u16 lan_reset;
+ u16 reserved0;
+ /* offset 0x20 */
+ u16 ps2_data;
+ u16 ps2_ctrl;
+ /* plus also 4 rs232 ports ... */
+};
+
static struct h2p2_dbg_fpga __iomem *fpga;
static u16 fpga_led_state;
@@ -94,7 +111,7 @@
if (!iomem)
return -ENODEV;
- fpga = ioremap(iomem->start, H2P2_DBG_FPGA_SIZE);
+ fpga = ioremap(iomem->start, resource_size(iomem));
__raw_writew(0xff, &fpga->leds);
for (i = 0; i < ARRAY_SIZE(dbg_leds); i++) {
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index c76ed8b..c288b76 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -36,9 +36,7 @@
#include <linux/slab.h>
#include <linux/delay.h>
-#include <plat/cpu.h>
-#include <plat/dma.h>
-#include <plat/tc.h>
+#include <plat-omap/dma-omap.h>
/*
* MAX_LOGICAL_DMA_CH_COUNT: the maximum number of logical DMA
@@ -175,12 +173,13 @@
#define omap_writel(val, reg) do {} while (0)
#endif
+#ifdef CONFIG_ARCH_OMAP1
void omap_set_dma_priority(int lch, int dst_port, int priority)
{
unsigned long reg;
u32 l;
- if (cpu_class_is_omap1()) {
+ if (dma_omap1()) {
switch (dst_port) {
case OMAP_DMA_PORT_OCP_T1: /* FFFECC00 */
reg = OMAP_TC_OCPT1_PRIOR;
@@ -203,18 +202,22 @@
l |= (priority & 0xf) << 8;
omap_writel(l, reg);
}
-
- if (cpu_class_is_omap2()) {
- u32 ccr;
-
- ccr = p->dma_read(CCR, lch);
- if (priority)
- ccr |= (1 << 6);
- else
- ccr &= ~(1 << 6);
- p->dma_write(ccr, CCR, lch);
- }
}
+#endif
+
+#ifdef CONFIG_ARCH_OMAP2PLUS
+void omap_set_dma_priority(int lch, int dst_port, int priority)
+{
+ u32 ccr;
+
+ ccr = p->dma_read(CCR, lch);
+ if (priority)
+ ccr |= (1 << 6);
+ else
+ ccr &= ~(1 << 6);
+ p->dma_write(ccr, CCR, lch);
+}
+#endif
EXPORT_SYMBOL(omap_set_dma_priority);
void omap_set_dma_transfer_params(int lch, int data_type, int elem_count,
@@ -228,7 +231,7 @@
l |= data_type;
p->dma_write(l, CSDP, lch);
- if (cpu_class_is_omap1()) {
+ if (dma_omap1()) {
u16 ccr;
ccr = p->dma_read(CCR, lch);
@@ -244,7 +247,7 @@
p->dma_write(ccr, CCR2, lch);
}
- if (cpu_class_is_omap2() && dma_trigger) {
+ if (dma_omap2plus() && dma_trigger) {
u32 val;
val = p->dma_read(CCR, lch);
@@ -284,7 +287,7 @@
{
BUG_ON(omap_dma_in_1510_mode());
- if (cpu_class_is_omap1()) {
+ if (dma_omap1()) {
u16 w;
w = p->dma_read(CCR2, lch);
@@ -314,7 +317,7 @@
p->dma_write(w, LCH_CTRL, lch);
}
- if (cpu_class_is_omap2()) {
+ if (dma_omap2plus()) {
u32 val;
val = p->dma_read(CCR, lch);
@@ -342,7 +345,7 @@
void omap_set_dma_write_mode(int lch, enum omap_dma_write_mode mode)
{
- if (cpu_class_is_omap2()) {
+ if (dma_omap2plus()) {
u32 csdp;
csdp = p->dma_read(CSDP, lch);
@@ -355,7 +358,7 @@
void omap_set_dma_channel_mode(int lch, enum omap_dma_channel_mode mode)
{
- if (cpu_class_is_omap1() && !cpu_is_omap15xx()) {
+ if (dma_omap1() && !dma_omap15xx()) {
u32 l;
l = p->dma_read(LCH_CTRL, lch);
@@ -373,7 +376,7 @@
{
u32 l;
- if (cpu_class_is_omap1()) {
+ if (dma_omap1()) {
u16 w;
w = p->dma_read(CSDP, lch);
@@ -415,7 +418,7 @@
void omap_set_dma_src_index(int lch, int eidx, int fidx)
{
- if (cpu_class_is_omap2())
+ if (dma_omap2plus())
return;
p->dma_write(eidx, CSEI, lch);
@@ -447,13 +450,13 @@
case OMAP_DMA_DATA_BURST_DIS:
break;
case OMAP_DMA_DATA_BURST_4:
- if (cpu_class_is_omap2())
+ if (dma_omap2plus())
burst = 0x1;
else
burst = 0x2;
break;
case OMAP_DMA_DATA_BURST_8:
- if (cpu_class_is_omap2()) {
+ if (dma_omap2plus()) {
burst = 0x2;
break;
}
@@ -463,7 +466,7 @@
* fall through
*/
case OMAP_DMA_DATA_BURST_16:
- if (cpu_class_is_omap2()) {
+ if (dma_omap2plus()) {
burst = 0x3;
break;
}
@@ -487,7 +490,7 @@
{
u32 l;
- if (cpu_class_is_omap1()) {
+ if (dma_omap1()) {
l = p->dma_read(CSDP, lch);
l &= ~(0x1f << 9);
l |= dest_port << 9;
@@ -508,7 +511,7 @@
void omap_set_dma_dest_index(int lch, int eidx, int fidx)
{
- if (cpu_class_is_omap2())
+ if (dma_omap2plus())
return;
p->dma_write(eidx, CDEI, lch);
@@ -540,19 +543,19 @@
case OMAP_DMA_DATA_BURST_DIS:
break;
case OMAP_DMA_DATA_BURST_4:
- if (cpu_class_is_omap2())
+ if (dma_omap2plus())
burst = 0x1;
else
burst = 0x2;
break;
case OMAP_DMA_DATA_BURST_8:
- if (cpu_class_is_omap2())
+ if (dma_omap2plus())
burst = 0x2;
else
burst = 0x3;
break;
case OMAP_DMA_DATA_BURST_16:
- if (cpu_class_is_omap2()) {
+ if (dma_omap2plus()) {
burst = 0x3;
break;
}
@@ -573,7 +576,7 @@
static inline void omap_enable_channel_irq(int lch)
{
/* Clear CSR */
- if (cpu_class_is_omap1())
+ if (dma_omap1())
p->dma_read(CSR, lch);
else
p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, lch);
@@ -587,7 +590,7 @@
/* disable channel interrupts */
p->dma_write(0, CICR, lch);
/* Clear CSR */
- if (cpu_class_is_omap1())
+ if (dma_omap1())
p->dma_read(CSR, lch);
else
p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, lch);
@@ -611,7 +614,7 @@
l = p->dma_read(CLNK_CTRL, lch);
- if (cpu_class_is_omap1())
+ if (dma_omap1())
l &= ~(1 << 14);
/* Set the ENABLE_LNK bits */
@@ -619,7 +622,7 @@
l = dma_chan[lch].next_lch | (1 << 15);
#ifndef CONFIG_ARCH_OMAP1
- if (cpu_class_is_omap2())
+ if (dma_omap2plus())
if (dma_chan[lch].next_linked_ch != -1)
l = dma_chan[lch].next_linked_ch | (1 << 15);
#endif
@@ -636,12 +639,12 @@
/* Disable interrupts */
omap_disable_channel_irq(lch);
- if (cpu_class_is_omap1()) {
+ if (dma_omap1()) {
/* Set the STOP_LNK bit */
l |= 1 << 14;
}
- if (cpu_class_is_omap2()) {
+ if (dma_omap2plus()) {
/* Clear the ENABLE_LNK bit */
l &= ~(1 << 15);
}
@@ -655,7 +658,7 @@
u32 val;
unsigned long flags;
- if (!cpu_class_is_omap2())
+ if (dma_omap1())
return;
spin_lock_irqsave(&dma_chan_lock, flags);
@@ -673,7 +676,7 @@
u32 val;
unsigned long flags;
- if (!cpu_class_is_omap2())
+ if (dma_omap1())
return;
spin_lock_irqsave(&dma_chan_lock, flags);
@@ -712,7 +715,7 @@
if (p->clear_lch_regs)
p->clear_lch_regs(free_ch);
- if (cpu_class_is_omap2())
+ if (dma_omap2plus())
omap_clear_dma(free_ch);
spin_unlock_irqrestore(&dma_chan_lock, flags);
@@ -723,7 +726,7 @@
chan->flags = 0;
#ifndef CONFIG_ARCH_OMAP1
- if (cpu_class_is_omap2()) {
+ if (dma_omap2plus()) {
chan->chain_id = -1;
chan->next_linked_ch = -1;
}
@@ -731,13 +734,13 @@
chan->enabled_irqs = OMAP_DMA_DROP_IRQ | OMAP_DMA_BLOCK_IRQ;
- if (cpu_class_is_omap1())
+ if (dma_omap1())
chan->enabled_irqs |= OMAP1_DMA_TOUT_IRQ;
- else if (cpu_class_is_omap2())
+ else if (dma_omap2plus())
chan->enabled_irqs |= OMAP2_DMA_MISALIGNED_ERR_IRQ |
OMAP2_DMA_TRANS_ERR_IRQ;
- if (cpu_is_omap16xx()) {
+ if (dma_omap16xx()) {
/* If the sync device is set, configure it dynamically. */
if (dev_id != 0) {
set_gdma_dev(free_ch + 1, dev_id);
@@ -748,11 +751,11 @@
* id.
*/
p->dma_write(dev_id | (1 << 10), CCR, free_ch);
- } else if (cpu_is_omap7xx() || cpu_is_omap15xx()) {
+ } else if (dma_omap1()) {
p->dma_write(dev_id, CCR, free_ch);
}
- if (cpu_class_is_omap2()) {
+ if (dma_omap2plus()) {
omap_enable_channel_irq(free_ch);
omap2_enable_irq_lch(free_ch);
}
@@ -774,7 +777,7 @@
}
/* Disable interrupt for logical channel */
- if (cpu_class_is_omap2())
+ if (dma_omap2plus())
omap2_disable_irq_lch(lch);
/* Disable all DMA interrupts for the channel. */
@@ -784,7 +787,7 @@
p->dma_write(0, CCR, lch);
/* Clear registers */
- if (cpu_class_is_omap2())
+ if (dma_omap2plus())
omap_clear_dma(lch);
spin_lock_irqsave(&dma_chan_lock, flags);
@@ -810,7 +813,7 @@
{
u32 reg;
- if (!cpu_class_is_omap2()) {
+ if (dma_omap1()) {
printk(KERN_ERR "FIXME: no %s on 15xx/16xx\n", __func__);
return;
}
@@ -849,7 +852,7 @@
}
l = p->dma_read(CCR, lch);
l &= ~((1 << 6) | (1 << 26));
- if (cpu_class_is_omap2() && !cpu_is_omap242x())
+ if (d->dev_caps & IS_RW_PRIORITY)
l |= ((read_prio & 0x1) << 6) | ((write_prio & 0x1) << 26);
else
l |= ((read_prio & 0x1) << 6);
@@ -882,7 +885,7 @@
* The CPC/CDAC register needs to be initialized to zero
* before starting dma transfer.
*/
- if (cpu_is_omap15xx())
+ if (dma_omap15xx())
p->dma_write(0, CPC, lch);
else
p->dma_write(0, CDAC, lch);
@@ -1045,7 +1048,7 @@
{
dma_addr_t offset = 0;
- if (cpu_is_omap15xx())
+ if (dma_omap15xx())
offset = p->dma_read(CPC, lch);
else
offset = p->dma_read(CSAC, lch);
@@ -1053,7 +1056,7 @@
if (IS_DMA_ERRATA(DMA_ERRATA_3_3) && offset == 0)
offset = p->dma_read(CSAC, lch);
- if (!cpu_is_omap15xx()) {
+ if (!dma_omap15xx()) {
/*
* CDAC == 0 indicates that the DMA transfer on the channel has
* not been started (no data has been transferred so far).
@@ -1065,7 +1068,7 @@
offset = p->dma_read(CSSA, lch);
}
- if (cpu_class_is_omap1())
+ if (dma_omap1())
offset |= (p->dma_read(CSSA, lch) & 0xFFFF0000);
return offset;
@@ -1084,7 +1087,7 @@
{
dma_addr_t offset = 0;
- if (cpu_is_omap15xx())
+ if (dma_omap15xx())
offset = p->dma_read(CPC, lch);
else
offset = p->dma_read(CDAC, lch);
@@ -1093,7 +1096,7 @@
* omap 3.2/3.3 erratum: sometimes 0 is returned if CSAC/CDAC is
* read before the DMA controller finished disabling the channel.
*/
- if (!cpu_is_omap15xx() && offset == 0) {
+ if (!dma_omap15xx() && offset == 0) {
offset = p->dma_read(CDAC, lch);
/*
* CDAC == 0 indicates that the DMA transfer on the channel has
@@ -1104,7 +1107,7 @@
offset = p->dma_read(CDSA, lch);
}
- if (cpu_class_is_omap1())
+ if (dma_omap1())
offset |= (p->dma_read(CDSA, lch) & 0xFFFF0000);
return offset;
@@ -1121,7 +1124,7 @@
{
int lch;
- if (cpu_class_is_omap1())
+ if (dma_omap1())
if (omap_lcd_dma_running())
return 1;
@@ -2024,7 +2027,7 @@
dma_chan = d->chan;
enable_1510_mode = d->dev_caps & ENABLE_1510_MODE;
- if (cpu_class_is_omap2()) {
+ if (dma_omap2plus()) {
dma_linked_lch = kzalloc(sizeof(struct dma_link_info) *
dma_lch_count, GFP_KERNEL);
if (!dma_linked_lch) {
@@ -2036,7 +2039,7 @@
spin_lock_init(&dma_chan_lock);
for (ch = 0; ch < dma_chan_count; ch++) {
omap_clear_dma(ch);
- if (cpu_class_is_omap2())
+ if (dma_omap2plus())
omap2_disable_irq_lch(ch);
dma_chan[ch].dev_id = -1;
@@ -2045,7 +2048,7 @@
if (ch >= 6 && enable_1510_mode)
continue;
- if (cpu_class_is_omap1()) {
+ if (dma_omap1()) {
/*
* request_irq() doesn't like dev_id (ie. ch) being
* zero, so we have to kludge around this.
@@ -2070,11 +2073,11 @@
}
}
- if (cpu_class_is_omap2() && !cpu_is_omap242x())
+ if (d->dev_caps & IS_RW_PRIORITY)
omap_dma_set_global_params(DMA_DEFAULT_ARB_RATE,
DMA_DEFAULT_FIFO_DEPTH, 0);
- if (cpu_class_is_omap2()) {
+ if (dma_omap2plus()) {
strcpy(irq_name, "0");
dma_irq = platform_get_irq_byname(pdev, irq_name);
if (dma_irq < 0) {
@@ -2089,9 +2092,8 @@
}
}
- /* reserve dma channels 0 and 1 in high security devices */
- if (cpu_is_omap34xx() &&
- (omap_type() != OMAP2_DEVICE_TYPE_GP)) {
+ /* reserve dma channels 0 and 1 in high security devices on 34xx */
+ if (d->dev_caps & HS_CHANNELS_RESERVED) {
pr_info("Reserving DMA channels 0 and 1 for HS ROM code\n");
dma_chan[0].dev_id = 0;
dma_chan[1].dev_id = 1;
@@ -2118,7 +2120,7 @@
{
int dma_irq;
- if (cpu_class_is_omap2()) {
+ if (dma_omap2plus()) {
char irq_name[4];
strcpy(irq_name, "0");
dma_irq = platform_get_irq_byname(pdev, irq_name);
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index 938b50a..82231a7 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -42,9 +42,6 @@
#include <linux/pm_runtime.h>
#include <plat/dmtimer.h>
-#include <plat/omap-pm.h>
-
-#include <mach/hardware.h>
static u32 omap_reserved_systimers;
static LIST_HEAD(omap_timer_list);
@@ -271,7 +268,7 @@
EXPORT_SYMBOL_GPL(omap_dm_timer_get_irq);
#if defined(CONFIG_ARCH_OMAP1)
-
+#include <mach/hardware.h>
/**
* omap_dm_timer_modify_idlect_mask - Check if any running timers use ARMXOR
* @inputmask: current value of idlect mask
@@ -348,7 +345,8 @@
omap_dm_timer_enable(timer);
if (!(timer->capability & OMAP_TIMER_ALWON)) {
- if (omap_pm_get_dev_context_loss_count(&timer->pdev->dev) !=
+ if (timer->get_context_loss_count &&
+ timer->get_context_loss_count(&timer->pdev->dev) !=
timer->ctx_loss_count)
omap_timer_restore_context(timer);
}
@@ -377,9 +375,11 @@
__omap_dm_timer_stop(timer, timer->posted, rate);
- if (!(timer->capability & OMAP_TIMER_ALWON))
- timer->ctx_loss_count =
- omap_pm_get_dev_context_loss_count(&timer->pdev->dev);
+ if (!(timer->capability & OMAP_TIMER_ALWON)) {
+ if (timer->get_context_loss_count)
+ timer->ctx_loss_count =
+ timer->get_context_loss_count(&timer->pdev->dev);
+ }
/*
* Since the register values are computed and written within
@@ -495,7 +495,8 @@
omap_dm_timer_enable(timer);
if (!(timer->capability & OMAP_TIMER_ALWON)) {
- if (omap_pm_get_dev_context_loss_count(&timer->pdev->dev) !=
+ if (timer->get_context_loss_count &&
+ timer->get_context_loss_count(&timer->pdev->dev) !=
timer->ctx_loss_count)
omap_timer_restore_context(timer);
}
@@ -729,6 +730,7 @@
timer->reserved = omap_dm_timer_reserved_systimer(timer->id);
timer->pdev = pdev;
timer->capability = pdata->timer_capability;
+ timer->get_context_loss_count = pdata->get_context_loss_count;
/* Skip pm_runtime_enable for OMAP1 */
if (!(timer->capability & OMAP_TIMER_NEEDS_RESET)) {
diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c
index bcbb9d5..3a77b30 100644
--- a/arch/arm/plat-omap/fb.c
+++ b/arch/arm/plat-omap/fb.c
@@ -30,9 +30,69 @@
#include <linux/io.h>
#include <linux/omapfb.h>
-#include <mach/hardware.h>
#include <asm/mach/map.h>
+#include <plat/cpu.h>
+
+#ifdef CONFIG_OMAP2_VRFB
+
+/*
+ * The first memory resource is the register region for VRFB,
+ * the rest are VRFB virtual memory areas for each VRFB context.
+ */
+
+static const struct resource omap2_vrfb_resources[] = {
+ DEFINE_RES_MEM_NAMED(0x68008000u, 0x40, "vrfb-regs"),
+ DEFINE_RES_MEM_NAMED(0x70000000u, 0x4000000, "vrfb-area-0"),
+ DEFINE_RES_MEM_NAMED(0x74000000u, 0x4000000, "vrfb-area-1"),
+ DEFINE_RES_MEM_NAMED(0x78000000u, 0x4000000, "vrfb-area-2"),
+ DEFINE_RES_MEM_NAMED(0x7c000000u, 0x4000000, "vrfb-area-3"),
+};
+
+static const struct resource omap3_vrfb_resources[] = {
+ DEFINE_RES_MEM_NAMED(0x6C000180u, 0xc0, "vrfb-regs"),
+ DEFINE_RES_MEM_NAMED(0x70000000u, 0x4000000, "vrfb-area-0"),
+ DEFINE_RES_MEM_NAMED(0x74000000u, 0x4000000, "vrfb-area-1"),
+ DEFINE_RES_MEM_NAMED(0x78000000u, 0x4000000, "vrfb-area-2"),
+ DEFINE_RES_MEM_NAMED(0x7c000000u, 0x4000000, "vrfb-area-3"),
+ DEFINE_RES_MEM_NAMED(0xe0000000u, 0x4000000, "vrfb-area-4"),
+ DEFINE_RES_MEM_NAMED(0xe4000000u, 0x4000000, "vrfb-area-5"),
+ DEFINE_RES_MEM_NAMED(0xe8000000u, 0x4000000, "vrfb-area-6"),
+ DEFINE_RES_MEM_NAMED(0xec000000u, 0x4000000, "vrfb-area-7"),
+ DEFINE_RES_MEM_NAMED(0xf0000000u, 0x4000000, "vrfb-area-8"),
+ DEFINE_RES_MEM_NAMED(0xf4000000u, 0x4000000, "vrfb-area-9"),
+ DEFINE_RES_MEM_NAMED(0xf8000000u, 0x4000000, "vrfb-area-10"),
+ DEFINE_RES_MEM_NAMED(0xfc000000u, 0x4000000, "vrfb-area-11"),
+};
+
+static int __init omap_init_vrfb(void)
+{
+ struct platform_device *pdev;
+ const struct resource *res;
+ unsigned int num_res;
+
+ if (cpu_is_omap24xx()) {
+ res = omap2_vrfb_resources;
+ num_res = ARRAY_SIZE(omap2_vrfb_resources);
+ } else if (cpu_is_omap34xx()) {
+ res = omap3_vrfb_resources;
+ num_res = ARRAY_SIZE(omap3_vrfb_resources);
+ } else {
+ return 0;
+ }
+
+ pdev = platform_device_register_resndata(NULL, "omapvrfb", -1,
+ res, num_res, NULL, 0);
+
+ if (IS_ERR(pdev))
+ return PTR_ERR(pdev);
+ else
+ return 0;
+}
+
+arch_initcall(omap_init_vrfb);
+#endif
+
#if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE)
static bool omapfb_lcd_configured;
diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c
index a5683a8..f9df624 100644
--- a/arch/arm/plat-omap/i2c.c
+++ b/arch/arm/plat-omap/i2c.c
@@ -26,160 +26,18 @@
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/i2c.h>
+#include <linux/i2c-omap.h>
#include <linux/slab.h>
#include <linux/err.h>
#include <linux/clk.h>
-#include <mach/irqs.h>
#include <plat/i2c.h>
-#include <plat/omap_device.h>
-#define OMAP_I2C_SIZE 0x3f
-#define OMAP1_I2C_BASE 0xfffb3800
-#define OMAP1_INT_I2C (32 + 4)
-
-static const char name[] = "omap_i2c";
-
-#define I2C_RESOURCE_BUILDER(base, irq) \
- { \
- .start = (base), \
- .end = (base) + OMAP_I2C_SIZE, \
- .flags = IORESOURCE_MEM, \
- }, \
- { \
- .start = (irq), \
- .flags = IORESOURCE_IRQ, \
- },
-
-static struct resource i2c_resources[][2] = {
- { I2C_RESOURCE_BUILDER(0, 0) },
-};
-
-#define I2C_DEV_BUILDER(bus_id, res, data) \
- { \
- .id = (bus_id), \
- .name = name, \
- .num_resources = ARRAY_SIZE(res), \
- .resource = (res), \
- .dev = { \
- .platform_data = (data), \
- }, \
- }
-
-#define MAX_OMAP_I2C_HWMOD_NAME_LEN 16
#define OMAP_I2C_MAX_CONTROLLERS 4
static struct omap_i2c_bus_platform_data i2c_pdata[OMAP_I2C_MAX_CONTROLLERS];
-static struct platform_device omap_i2c_devices[] = {
- I2C_DEV_BUILDER(1, i2c_resources[0], &i2c_pdata[0]),
-};
#define OMAP_I2C_CMDLINE_SETUP (BIT(31))
-static int __init omap_i2c_nr_ports(void)
-{
- int ports = 0;
-
- if (cpu_class_is_omap1())
- ports = 1;
- else if (cpu_is_omap24xx())
- ports = 2;
- else if (cpu_is_omap34xx())
- ports = 3;
- else if (cpu_is_omap44xx())
- ports = 4;
-
- return ports;
-}
-
-static inline int omap1_i2c_add_bus(int bus_id)
-{
- struct platform_device *pdev;
- struct omap_i2c_bus_platform_data *pdata;
- struct resource *res;
-
- omap1_i2c_mux_pins(bus_id);
-
- pdev = &omap_i2c_devices[bus_id - 1];
- res = pdev->resource;
- res[0].start = OMAP1_I2C_BASE;
- res[0].end = res[0].start + OMAP_I2C_SIZE;
- res[1].start = OMAP1_INT_I2C;
- pdata = &i2c_pdata[bus_id - 1];
-
- /* all OMAP1 have IP version 1 register set */
- pdata->rev = OMAP_I2C_IP_VERSION_1;
-
- /* all OMAP1 I2C are implemented like this */
- pdata->flags = OMAP_I2C_FLAG_NO_FIFO |
- OMAP_I2C_FLAG_SIMPLE_CLOCK |
- OMAP_I2C_FLAG_16BIT_DATA_REG |
- OMAP_I2C_FLAG_ALWAYS_ARMXOR_CLK;
-
- /* how the cpu bus is wired up differs for 7xx only */
-
- if (cpu_is_omap7xx())
- pdata->flags |= OMAP_I2C_FLAG_BUS_SHIFT_1;
- else
- pdata->flags |= OMAP_I2C_FLAG_BUS_SHIFT_2;
-
- return platform_device_register(pdev);
-}
-
-
-#ifdef CONFIG_ARCH_OMAP2PLUS
-static inline int omap2_i2c_add_bus(int bus_id)
-{
- int l;
- struct omap_hwmod *oh;
- struct platform_device *pdev;
- char oh_name[MAX_OMAP_I2C_HWMOD_NAME_LEN];
- struct omap_i2c_bus_platform_data *pdata;
- struct omap_i2c_dev_attr *dev_attr;
-
- omap2_i2c_mux_pins(bus_id);
-
- l = snprintf(oh_name, MAX_OMAP_I2C_HWMOD_NAME_LEN, "i2c%d", bus_id);
- WARN(l >= MAX_OMAP_I2C_HWMOD_NAME_LEN,
- "String buffer overflow in I2C%d device setup\n", bus_id);
- oh = omap_hwmod_lookup(oh_name);
- if (!oh) {
- pr_err("Could not look up %s\n", oh_name);
- return -EEXIST;
- }
-
- pdata = &i2c_pdata[bus_id - 1];
- /*
- * pass the hwmod class's CPU-specific knowledge of I2C IP revision in
- * use, and functionality implementation flags, up to the OMAP I2C
- * driver via platform data
- */
- pdata->rev = oh->class->rev;
-
- dev_attr = (struct omap_i2c_dev_attr *)oh->dev_attr;
- pdata->flags = dev_attr->flags;
-
- pdev = omap_device_build(name, bus_id, oh, pdata,
- sizeof(struct omap_i2c_bus_platform_data),
- NULL, 0, 0);
- WARN(IS_ERR(pdev), "Could not build omap_device for %s\n", name);
-
- return PTR_RET(pdev);
-}
-#else
-static inline int omap2_i2c_add_bus(int bus_id)
-{
- return 0;
-}
-#endif
-
-static int __init omap_i2c_add_bus(int bus_id)
-{
- if (cpu_class_is_omap1())
- return omap1_i2c_add_bus(bus_id);
- else
- return omap2_i2c_add_bus(bus_id);
-}
-
/**
* omap_i2c_bus_setup - Process command line options for the I2C bus speed
* @str: String of options
@@ -193,12 +51,11 @@
*/
static int __init omap_i2c_bus_setup(char *str)
{
- int ports;
int ints[3];
- ports = omap_i2c_nr_ports();
get_options(str, 3, ints);
- if (ints[0] < 2 || ints[1] < 1 || ints[1] > ports)
+ if (ints[0] < 2 || ints[1] < 1 ||
+ ints[1] > OMAP_I2C_MAX_CONTROLLERS)
return 0;
i2c_pdata[ints[1] - 1].clkrate = ints[2];
i2c_pdata[ints[1] - 1].clkrate |= OMAP_I2C_CMDLINE_SETUP;
@@ -218,7 +75,7 @@
for (i = 0; i < ARRAY_SIZE(i2c_pdata); i++)
if (i2c_pdata[i].clkrate & OMAP_I2C_CMDLINE_SETUP) {
i2c_pdata[i].clkrate &= ~OMAP_I2C_CMDLINE_SETUP;
- err = omap_i2c_add_bus(i + 1);
+ err = omap_i2c_add_bus(&i2c_pdata[i], i + 1);
if (err)
goto out;
}
@@ -243,7 +100,7 @@
{
int err;
- BUG_ON(bus_id < 1 || bus_id > omap_i2c_nr_ports());
+ BUG_ON(bus_id < 1 || bus_id > OMAP_I2C_MAX_CONTROLLERS);
if (info) {
err = i2c_register_board_info(bus_id, info, len);
@@ -256,5 +113,5 @@
i2c_pdata[bus_id - 1].clkrate &= ~OMAP_I2C_CMDLINE_SETUP;
- return omap_i2c_add_bus(bus_id);
+ return omap_i2c_add_bus(&i2c_pdata[bus_id - 1], bus_id);
}
diff --git a/arch/arm/plat-omap/include/plat/dma.h b/arch/arm/plat-omap/include/plat-omap/dma-omap.h
similarity index 60%
rename from arch/arm/plat-omap/include/plat/dma.h
rename to arch/arm/plat-omap/include/plat-omap/dma-omap.h
index 0a87b05..6f506ba 100644
--- a/arch/arm/plat-omap/include/plat/dma.h
+++ b/arch/arm/plat-omap/include/plat-omap/dma-omap.h
@@ -1,5 +1,5 @@
/*
- * arch/arm/plat-omap/include/mach/dma.h
+ * OMAP DMA handling defines and function
*
* Copyright (C) 2003 Nokia Corporation
* Author: Juha Yrjölä <juha.yrjola@nokia.com>
@@ -23,187 +23,8 @@
#include <linux/platform_device.h>
-/*
- * TODO: These dma channel defines should go away once all
- * the omap drivers hwmod adapted.
- */
-
-/* Move omap4 specific defines to dma-44xx.h */
-#include "dma-44xx.h"
-
#define INT_DMA_LCD 25
-/* DMA channels for omap1 */
-#define OMAP_DMA_NO_DEVICE 0
-#define OMAP_DMA_MCSI1_TX 1
-#define OMAP_DMA_MCSI1_RX 2
-#define OMAP_DMA_I2C_RX 3
-#define OMAP_DMA_I2C_TX 4
-#define OMAP_DMA_EXT_NDMA_REQ 5
-#define OMAP_DMA_EXT_NDMA_REQ2 6
-#define OMAP_DMA_UWIRE_TX 7
-#define OMAP_DMA_MCBSP1_TX 8
-#define OMAP_DMA_MCBSP1_RX 9
-#define OMAP_DMA_MCBSP3_TX 10
-#define OMAP_DMA_MCBSP3_RX 11
-#define OMAP_DMA_UART1_TX 12
-#define OMAP_DMA_UART1_RX 13
-#define OMAP_DMA_UART2_TX 14
-#define OMAP_DMA_UART2_RX 15
-#define OMAP_DMA_MCBSP2_TX 16
-#define OMAP_DMA_MCBSP2_RX 17
-#define OMAP_DMA_UART3_TX 18
-#define OMAP_DMA_UART3_RX 19
-#define OMAP_DMA_CAMERA_IF_RX 20
-#define OMAP_DMA_MMC_TX 21
-#define OMAP_DMA_MMC_RX 22
-#define OMAP_DMA_NAND 23
-#define OMAP_DMA_IRQ_LCD_LINE 24
-#define OMAP_DMA_MEMORY_STICK 25
-#define OMAP_DMA_USB_W2FC_RX0 26
-#define OMAP_DMA_USB_W2FC_RX1 27
-#define OMAP_DMA_USB_W2FC_RX2 28
-#define OMAP_DMA_USB_W2FC_TX0 29
-#define OMAP_DMA_USB_W2FC_TX1 30
-#define OMAP_DMA_USB_W2FC_TX2 31
-
-/* These are only for 1610 */
-#define OMAP_DMA_CRYPTO_DES_IN 32
-#define OMAP_DMA_SPI_TX 33
-#define OMAP_DMA_SPI_RX 34
-#define OMAP_DMA_CRYPTO_HASH 35
-#define OMAP_DMA_CCP_ATTN 36
-#define OMAP_DMA_CCP_FIFO_NOT_EMPTY 37
-#define OMAP_DMA_CMT_APE_TX_CHAN_0 38
-#define OMAP_DMA_CMT_APE_RV_CHAN_0 39
-#define OMAP_DMA_CMT_APE_TX_CHAN_1 40
-#define OMAP_DMA_CMT_APE_RV_CHAN_1 41
-#define OMAP_DMA_CMT_APE_TX_CHAN_2 42
-#define OMAP_DMA_CMT_APE_RV_CHAN_2 43
-#define OMAP_DMA_CMT_APE_TX_CHAN_3 44
-#define OMAP_DMA_CMT_APE_RV_CHAN_3 45
-#define OMAP_DMA_CMT_APE_TX_CHAN_4 46
-#define OMAP_DMA_CMT_APE_RV_CHAN_4 47
-#define OMAP_DMA_CMT_APE_TX_CHAN_5 48
-#define OMAP_DMA_CMT_APE_RV_CHAN_5 49
-#define OMAP_DMA_CMT_APE_TX_CHAN_6 50
-#define OMAP_DMA_CMT_APE_RV_CHAN_6 51
-#define OMAP_DMA_CMT_APE_TX_CHAN_7 52
-#define OMAP_DMA_CMT_APE_RV_CHAN_7 53
-#define OMAP_DMA_MMC2_TX 54
-#define OMAP_DMA_MMC2_RX 55
-#define OMAP_DMA_CRYPTO_DES_OUT 56
-
-/* DMA channels for 24xx */
-#define OMAP24XX_DMA_NO_DEVICE 0
-#define OMAP24XX_DMA_XTI_DMA 1 /* S_DMA_0 */
-#define OMAP24XX_DMA_EXT_DMAREQ0 2 /* S_DMA_1 */
-#define OMAP24XX_DMA_EXT_DMAREQ1 3 /* S_DMA_2 */
-#define OMAP24XX_DMA_GPMC 4 /* S_DMA_3 */
-#define OMAP24XX_DMA_GFX 5 /* S_DMA_4 */
-#define OMAP24XX_DMA_DSS 6 /* S_DMA_5 */
-#define OMAP242X_DMA_VLYNQ_TX 7 /* S_DMA_6 */
-#define OMAP24XX_DMA_EXT_DMAREQ2 7 /* S_DMA_6 */
-#define OMAP24XX_DMA_CWT 8 /* S_DMA_7 */
-#define OMAP24XX_DMA_AES_TX 9 /* S_DMA_8 */
-#define OMAP24XX_DMA_AES_RX 10 /* S_DMA_9 */
-#define OMAP24XX_DMA_DES_TX 11 /* S_DMA_10 */
-#define OMAP24XX_DMA_DES_RX 12 /* S_DMA_11 */
-#define OMAP24XX_DMA_SHA1MD5_RX 13 /* S_DMA_12 */
-#define OMAP34XX_DMA_SHA2MD5_RX 13 /* S_DMA_12 */
-#define OMAP242X_DMA_EXT_DMAREQ2 14 /* S_DMA_13 */
-#define OMAP242X_DMA_EXT_DMAREQ3 15 /* S_DMA_14 */
-#define OMAP242X_DMA_EXT_DMAREQ4 16 /* S_DMA_15 */
-#define OMAP242X_DMA_EAC_AC_RD 17 /* S_DMA_16 */
-#define OMAP242X_DMA_EAC_AC_WR 18 /* S_DMA_17 */
-#define OMAP242X_DMA_EAC_MD_UL_RD 19 /* S_DMA_18 */
-#define OMAP242X_DMA_EAC_MD_UL_WR 20 /* S_DMA_19 */
-#define OMAP242X_DMA_EAC_MD_DL_RD 21 /* S_DMA_20 */
-#define OMAP242X_DMA_EAC_MD_DL_WR 22 /* S_DMA_21 */
-#define OMAP242X_DMA_EAC_BT_UL_RD 23 /* S_DMA_22 */
-#define OMAP242X_DMA_EAC_BT_UL_WR 24 /* S_DMA_23 */
-#define OMAP242X_DMA_EAC_BT_DL_RD 25 /* S_DMA_24 */
-#define OMAP242X_DMA_EAC_BT_DL_WR 26 /* S_DMA_25 */
-#define OMAP243X_DMA_EXT_DMAREQ3 14 /* S_DMA_13 */
-#define OMAP24XX_DMA_SPI3_TX0 15 /* S_DMA_14 */
-#define OMAP24XX_DMA_SPI3_RX0 16 /* S_DMA_15 */
-#define OMAP24XX_DMA_MCBSP3_TX 17 /* S_DMA_16 */
-#define OMAP24XX_DMA_MCBSP3_RX 18 /* S_DMA_17 */
-#define OMAP24XX_DMA_MCBSP4_TX 19 /* S_DMA_18 */
-#define OMAP24XX_DMA_MCBSP4_RX 20 /* S_DMA_19 */
-#define OMAP24XX_DMA_MCBSP5_TX 21 /* S_DMA_20 */
-#define OMAP24XX_DMA_MCBSP5_RX 22 /* S_DMA_21 */
-#define OMAP24XX_DMA_SPI3_TX1 23 /* S_DMA_22 */
-#define OMAP24XX_DMA_SPI3_RX1 24 /* S_DMA_23 */
-#define OMAP243X_DMA_EXT_DMAREQ4 25 /* S_DMA_24 */
-#define OMAP243X_DMA_EXT_DMAREQ5 26 /* S_DMA_25 */
-#define OMAP34XX_DMA_I2C3_TX 25 /* S_DMA_24 */
-#define OMAP34XX_DMA_I2C3_RX 26 /* S_DMA_25 */
-#define OMAP24XX_DMA_I2C1_TX 27 /* S_DMA_26 */
-#define OMAP24XX_DMA_I2C1_RX 28 /* S_DMA_27 */
-#define OMAP24XX_DMA_I2C2_TX 29 /* S_DMA_28 */
-#define OMAP24XX_DMA_I2C2_RX 30 /* S_DMA_29 */
-#define OMAP24XX_DMA_MCBSP1_TX 31 /* S_DMA_30 */
-#define OMAP24XX_DMA_MCBSP1_RX 32 /* S_DMA_31 */
-#define OMAP24XX_DMA_MCBSP2_TX 33 /* S_DMA_32 */
-#define OMAP24XX_DMA_MCBSP2_RX 34 /* S_DMA_33 */
-#define OMAP24XX_DMA_SPI1_TX0 35 /* S_DMA_34 */
-#define OMAP24XX_DMA_SPI1_RX0 36 /* S_DMA_35 */
-#define OMAP24XX_DMA_SPI1_TX1 37 /* S_DMA_36 */
-#define OMAP24XX_DMA_SPI1_RX1 38 /* S_DMA_37 */
-#define OMAP24XX_DMA_SPI1_TX2 39 /* S_DMA_38 */
-#define OMAP24XX_DMA_SPI1_RX2 40 /* S_DMA_39 */
-#define OMAP24XX_DMA_SPI1_TX3 41 /* S_DMA_40 */
-#define OMAP24XX_DMA_SPI1_RX3 42 /* S_DMA_41 */
-#define OMAP24XX_DMA_SPI2_TX0 43 /* S_DMA_42 */
-#define OMAP24XX_DMA_SPI2_RX0 44 /* S_DMA_43 */
-#define OMAP24XX_DMA_SPI2_TX1 45 /* S_DMA_44 */
-#define OMAP24XX_DMA_SPI2_RX1 46 /* S_DMA_45 */
-#define OMAP24XX_DMA_MMC2_TX 47 /* S_DMA_46 */
-#define OMAP24XX_DMA_MMC2_RX 48 /* S_DMA_47 */
-#define OMAP24XX_DMA_UART1_TX 49 /* S_DMA_48 */
-#define OMAP24XX_DMA_UART1_RX 50 /* S_DMA_49 */
-#define OMAP24XX_DMA_UART2_TX 51 /* S_DMA_50 */
-#define OMAP24XX_DMA_UART2_RX 52 /* S_DMA_51 */
-#define OMAP24XX_DMA_UART3_TX 53 /* S_DMA_52 */
-#define OMAP24XX_DMA_UART3_RX 54 /* S_DMA_53 */
-#define OMAP24XX_DMA_USB_W2FC_TX0 55 /* S_DMA_54 */
-#define OMAP24XX_DMA_USB_W2FC_RX0 56 /* S_DMA_55 */
-#define OMAP24XX_DMA_USB_W2FC_TX1 57 /* S_DMA_56 */
-#define OMAP24XX_DMA_USB_W2FC_RX1 58 /* S_DMA_57 */
-#define OMAP24XX_DMA_USB_W2FC_TX2 59 /* S_DMA_58 */
-#define OMAP24XX_DMA_USB_W2FC_RX2 60 /* S_DMA_59 */
-#define OMAP24XX_DMA_MMC1_TX 61 /* S_DMA_60 */
-#define OMAP24XX_DMA_MMC1_RX 62 /* S_DMA_61 */
-#define OMAP24XX_DMA_MS 63 /* S_DMA_62 */
-#define OMAP242X_DMA_EXT_DMAREQ5 64 /* S_DMA_63 */
-#define OMAP243X_DMA_EXT_DMAREQ6 64 /* S_DMA_63 */
-#define OMAP34XX_DMA_EXT_DMAREQ3 64 /* S_DMA_63 */
-#define OMAP34XX_DMA_AES2_TX 65 /* S_DMA_64 */
-#define OMAP34XX_DMA_AES2_RX 66 /* S_DMA_65 */
-#define OMAP34XX_DMA_DES2_TX 67 /* S_DMA_66 */
-#define OMAP34XX_DMA_DES2_RX 68 /* S_DMA_67 */
-#define OMAP34XX_DMA_SHA1MD5_RX 69 /* S_DMA_68 */
-#define OMAP34XX_DMA_SPI4_TX0 70 /* S_DMA_69 */
-#define OMAP34XX_DMA_SPI4_RX0 71 /* S_DMA_70 */
-#define OMAP34XX_DSS_DMA0 72 /* S_DMA_71 */
-#define OMAP34XX_DSS_DMA1 73 /* S_DMA_72 */
-#define OMAP34XX_DSS_DMA2 74 /* S_DMA_73 */
-#define OMAP34XX_DSS_DMA3 75 /* S_DMA_74 */
-#define OMAP34XX_DMA_MMC3_TX 77 /* S_DMA_76 */
-#define OMAP34XX_DMA_MMC3_RX 78 /* S_DMA_77 */
-#define OMAP34XX_DMA_USIM_TX 79 /* S_DMA_78 */
-#define OMAP34XX_DMA_USIM_RX 80 /* S_DMA_79 */
-
-#define OMAP36XX_DMA_UART4_TX 81 /* S_DMA_80 */
-#define OMAP36XX_DMA_UART4_RX 82 /* S_DMA_81 */
-
-/* Only for AM35xx */
-#define AM35XX_DMA_UART4_TX 54
-#define AM35XX_DMA_UART4_RX 55
-
-/*----------------------------------------------------------------------------*/
-
#define OMAP1_DMA_TOUT_IRQ (1 << 0)
#define OMAP_DMA_DROP_IRQ (1 << 1)
#define OMAP_DMA_HALF_IRQ (1 << 2)
@@ -309,10 +130,12 @@
#define SRC_PORT BIT(0x7)
#define DST_PORT BIT(0x8)
#define SRC_INDEX BIT(0x9)
-#define DST_INDEX BIT(0xA)
-#define IS_BURST_ONLY4 BIT(0xB)
-#define CLEAR_CSR_ON_READ BIT(0xC)
-#define IS_WORD_16 BIT(0xD)
+#define DST_INDEX BIT(0xa)
+#define IS_BURST_ONLY4 BIT(0xb)
+#define CLEAR_CSR_ON_READ BIT(0xc)
+#define IS_WORD_16 BIT(0xd)
+#define ENABLE_16XX_MODE BIT(0xe)
+#define HS_CHANNELS_RESERVED BIT(0xf)
/* Defines for DMA Capabilities */
#define DMA_HAS_TRANSPARENT_CAPS (0x1 << 18)
@@ -449,7 +272,15 @@
u32 (*dma_read)(int reg, int lch);
};
-extern void __init omap_init_consistent_dma_size(void);
+#ifdef CONFIG_ARCH_OMAP2PLUS
+#define dma_omap2plus() 1
+#else
+#define dma_omap2plus() 0
+#endif
+#define dma_omap1() (!dma_omap2plus())
+#define dma_omap15xx() ((dma_omap1() && (d->dev_caps & ENABLE_1510_MODE)))
+#define dma_omap16xx() ((dma_omap1() && (d->dev_caps & ENABLE_16XX_MODE)))
+
extern void omap_set_dma_priority(int lch, int dst_port, int priority);
extern int omap_request_dma(int dev_id, const char *dev_name,
void (*callback)(int lch, u16 ch_status, void *data),
diff --git a/arch/arm/plat-omap/include/plat/clkdev_omap.h b/arch/arm/plat-omap/include/plat/clkdev_omap.h
deleted file mode 100644
index 025d85a..0000000
--- a/arch/arm/plat-omap/include/plat/clkdev_omap.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * clkdev <-> OMAP integration
- *
- * Russell King <linux@arm.linux.org.uk>
- *
- */
-
-#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_CLKDEV_OMAP_H
-#define __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_CLKDEV_OMAP_H
-
-#include <linux/clkdev.h>
-
-struct omap_clk {
- u16 cpu;
- struct clk_lookup lk;
-};
-
-#define CLK(dev, con, ck, cp) \
- { \
- .cpu = cp, \
- .lk = { \
- .dev_id = dev, \
- .con_id = con, \
- .clk = ck, \
- }, \
- }
-
-/* Platform flags for the clkdev-OMAP integration code */
-#define CK_310 (1 << 0)
-#define CK_7XX (1 << 1) /* 7xx, 850 */
-#define CK_1510 (1 << 2)
-#define CK_16XX (1 << 3) /* 16xx, 17xx, 5912 */
-#define CK_242X (1 << 4)
-#define CK_243X (1 << 5) /* 243x, 253x */
-#define CK_3430ES1 (1 << 6) /* 34xxES1 only */
-#define CK_3430ES2PLUS (1 << 7) /* 34xxES2, ES3, non-Sitara 35xx only */
-#define CK_AM35XX (1 << 9) /* Sitara AM35xx */
-#define CK_36XX (1 << 10) /* 36xx/37xx-specific clocks */
-#define CK_443X (1 << 11)
-#define CK_TI816X (1 << 12)
-#define CK_446X (1 << 13)
-#define CK_AM33XX (1 << 14) /* AM33xx specific clocks */
-#define CK_1710 (1 << 15) /* 1710 extra for rate selection */
-
-
-#define CK_34XX (CK_3430ES1 | CK_3430ES2PLUS)
-#define CK_3XXX (CK_34XX | CK_AM35XX | CK_36XX)
-
-
-#endif
-
diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h
deleted file mode 100644
index e2e2d04..0000000
--- a/arch/arm/plat-omap/include/plat/clock.h
+++ /dev/null
@@ -1,309 +0,0 @@
-/*
- * OMAP clock: data structure definitions, function prototypes, shared macros
- *
- * Copyright (C) 2004-2005, 2008-2010 Nokia Corporation
- * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
- * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_OMAP_CLOCK_H
-#define __ARCH_ARM_OMAP_CLOCK_H
-
-#include <linux/list.h>
-
-struct module;
-struct clk;
-struct clockdomain;
-
-/* Temporary, needed during the common clock framework conversion */
-#define __clk_get_name(clk) (clk->name)
-#define __clk_get_parent(clk) (clk->parent)
-#define __clk_get_rate(clk) (clk->rate)
-
-/**
- * struct clkops - some clock function pointers
- * @enable: fn ptr that enables the current clock in hardware
- * @disable: fn ptr that enables the current clock in hardware
- * @find_idlest: function returning the IDLEST register for the clock's IP blk
- * @find_companion: function returning the "companion" clk reg for the clock
- * @allow_idle: fn ptr that enables autoidle for the current clock in hardware
- * @deny_idle: fn ptr that disables autoidle for the current clock in hardware
- *
- * A "companion" clk is an accompanying clock to the one being queried
- * that must be enabled for the IP module connected to the clock to
- * become accessible by the hardware. Neither @find_idlest nor
- * @find_companion should be needed; that information is IP
- * block-specific; the hwmod code has been created to handle this, but
- * until hwmod data is ready and drivers have been converted to use PM
- * runtime calls in place of clk_enable()/clk_disable(), @find_idlest and
- * @find_companion must, unfortunately, remain.
- */
-struct clkops {
- int (*enable)(struct clk *);
- void (*disable)(struct clk *);
- void (*find_idlest)(struct clk *, void __iomem **,
- u8 *, u8 *);
- void (*find_companion)(struct clk *, void __iomem **,
- u8 *);
- void (*allow_idle)(struct clk *);
- void (*deny_idle)(struct clk *);
-};
-
-#ifdef CONFIG_ARCH_OMAP2PLUS
-
-/* struct clksel_rate.flags possibilities */
-#define RATE_IN_242X (1 << 0)
-#define RATE_IN_243X (1 << 1)
-#define RATE_IN_3430ES1 (1 << 2) /* 3430ES1 rates only */
-#define RATE_IN_3430ES2PLUS (1 << 3) /* 3430 ES >= 2 rates only */
-#define RATE_IN_36XX (1 << 4)
-#define RATE_IN_4430 (1 << 5)
-#define RATE_IN_TI816X (1 << 6)
-#define RATE_IN_4460 (1 << 7)
-#define RATE_IN_AM33XX (1 << 8)
-#define RATE_IN_TI814X (1 << 9)
-
-#define RATE_IN_24XX (RATE_IN_242X | RATE_IN_243X)
-#define RATE_IN_34XX (RATE_IN_3430ES1 | RATE_IN_3430ES2PLUS)
-#define RATE_IN_3XXX (RATE_IN_34XX | RATE_IN_36XX)
-#define RATE_IN_44XX (RATE_IN_4430 | RATE_IN_4460)
-
-/* RATE_IN_3430ES2PLUS_36XX includes 34xx/35xx with ES >=2, and all 36xx/37xx */
-#define RATE_IN_3430ES2PLUS_36XX (RATE_IN_3430ES2PLUS | RATE_IN_36XX)
-
-
-/**
- * struct clksel_rate - register bitfield values corresponding to clk divisors
- * @val: register bitfield value (shifted to bit 0)
- * @div: clock divisor corresponding to @val
- * @flags: (see "struct clksel_rate.flags possibilities" above)
- *
- * @val should match the value of a read from struct clk.clksel_reg
- * AND'ed with struct clk.clksel_mask, shifted right to bit 0.
- *
- * @div is the divisor that should be applied to the parent clock's rate
- * to produce the current clock's rate.
- */
-struct clksel_rate {
- u32 val;
- u8 div;
- u16 flags;
-};
-
-/**
- * struct clksel - available parent clocks, and a pointer to their divisors
- * @parent: struct clk * to a possible parent clock
- * @rates: available divisors for this parent clock
- *
- * A struct clksel is always associated with one or more struct clks
- * and one or more struct clksel_rates.
- */
-struct clksel {
- struct clk *parent;
- const struct clksel_rate *rates;
-};
-
-/**
- * struct dpll_data - DPLL registers and integration data
- * @mult_div1_reg: register containing the DPLL M and N bitfields
- * @mult_mask: mask of the DPLL M bitfield in @mult_div1_reg
- * @div1_mask: mask of the DPLL N bitfield in @mult_div1_reg
- * @clk_bypass: struct clk pointer to the clock's bypass clock input
- * @clk_ref: struct clk pointer to the clock's reference clock input
- * @control_reg: register containing the DPLL mode bitfield
- * @enable_mask: mask of the DPLL mode bitfield in @control_reg
- * @last_rounded_rate: cache of the last rate result of omap2_dpll_round_rate()
- * @last_rounded_m: cache of the last M result of omap2_dpll_round_rate()
- * @max_multiplier: maximum valid non-bypass multiplier value (actual)
- * @last_rounded_n: cache of the last N result of omap2_dpll_round_rate()
- * @min_divider: minimum valid non-bypass divider value (actual)
- * @max_divider: maximum valid non-bypass divider value (actual)
- * @modes: possible values of @enable_mask
- * @autoidle_reg: register containing the DPLL autoidle mode bitfield
- * @idlest_reg: register containing the DPLL idle status bitfield
- * @autoidle_mask: mask of the DPLL autoidle mode bitfield in @autoidle_reg
- * @freqsel_mask: mask of the DPLL jitter correction bitfield in @control_reg
- * @idlest_mask: mask of the DPLL idle status bitfield in @idlest_reg
- * @auto_recal_bit: bitshift of the driftguard enable bit in @control_reg
- * @recal_en_bit: bitshift of the PRM_IRQENABLE_* bit for recalibration IRQs
- * @recal_st_bit: bitshift of the PRM_IRQSTATUS_* bit for recalibration IRQs
- * @flags: DPLL type/features (see below)
- *
- * Possible values for @flags:
- * DPLL_J_TYPE: "J-type DPLL" (only some 36xx, 4xxx DPLLs)
- *
- * @freqsel_mask is only used on the OMAP34xx family and AM35xx.
- *
- * XXX Some DPLLs have multiple bypass inputs, so it's not technically
- * correct to only have one @clk_bypass pointer.
- *
- * XXX The runtime-variable fields (@last_rounded_rate, @last_rounded_m,
- * @last_rounded_n) should be separated from the runtime-fixed fields
- * and placed into a different structure, so that the runtime-fixed data
- * can be placed into read-only space.
- */
-struct dpll_data {
- void __iomem *mult_div1_reg;
- u32 mult_mask;
- u32 div1_mask;
- struct clk *clk_bypass;
- struct clk *clk_ref;
- void __iomem *control_reg;
- u32 enable_mask;
- unsigned long last_rounded_rate;
- u16 last_rounded_m;
- u16 max_multiplier;
- u8 last_rounded_n;
- u8 min_divider;
- u16 max_divider;
- u8 modes;
- void __iomem *autoidle_reg;
- void __iomem *idlest_reg;
- u32 autoidle_mask;
- u32 freqsel_mask;
- u32 idlest_mask;
- u32 dco_mask;
- u32 sddiv_mask;
- u8 auto_recal_bit;
- u8 recal_en_bit;
- u8 recal_st_bit;
- u8 flags;
-};
-
-#endif
-
-/*
- * struct clk.flags possibilities
- *
- * XXX document the rest of the clock flags here
- *
- * CLOCK_CLKOUTX2: (OMAP4 only) DPLL CLKOUT and CLKOUTX2 GATE_CTRL
- * bits share the same register. This flag allows the
- * omap4_dpllmx*() code to determine which GATE_CTRL bit field
- * should be used. This is a temporary solution - a better approach
- * would be to associate clock type-specific data with the clock,
- * similar to the struct dpll_data approach.
- */
-#define ENABLE_REG_32BIT (1 << 0) /* Use 32-bit access */
-#define CLOCK_IDLE_CONTROL (1 << 1)
-#define CLOCK_NO_IDLE_PARENT (1 << 2)
-#define ENABLE_ON_INIT (1 << 3) /* Enable upon framework init */
-#define INVERT_ENABLE (1 << 4) /* 0 enables, 1 disables */
-#define CLOCK_CLKOUTX2 (1 << 5)
-
-/**
- * struct clk - OMAP struct clk
- * @node: list_head connecting this clock into the full clock list
- * @ops: struct clkops * for this clock
- * @name: the name of the clock in the hardware (used in hwmod data and debug)
- * @parent: pointer to this clock's parent struct clk
- * @children: list_head connecting to the child clks' @sibling list_heads
- * @sibling: list_head connecting this clk to its parent clk's @children
- * @rate: current clock rate
- * @enable_reg: register to write to enable the clock (see @enable_bit)
- * @recalc: fn ptr that returns the clock's current rate
- * @set_rate: fn ptr that can change the clock's current rate
- * @round_rate: fn ptr that can round the clock's current rate
- * @init: fn ptr to do clock-specific initialization
- * @enable_bit: bitshift to write to enable/disable the clock (see @enable_reg)
- * @usecount: number of users that have requested this clock to be enabled
- * @fixed_div: when > 0, this clock's rate is its parent's rate / @fixed_div
- * @flags: see "struct clk.flags possibilities" above
- * @clksel_reg: for clksel clks, register va containing src/divisor select
- * @clksel_mask: bitmask in @clksel_reg for the src/divisor selector
- * @clksel: for clksel clks, pointer to struct clksel for this clock
- * @dpll_data: for DPLLs, pointer to struct dpll_data for this clock
- * @clkdm_name: clockdomain name that this clock is contained in
- * @clkdm: pointer to struct clockdomain, resolved from @clkdm_name at runtime
- * @rate_offset: bitshift for rate selection bitfield (OMAP1 only)
- * @src_offset: bitshift for source selection bitfield (OMAP1 only)
- *
- * XXX @rate_offset, @src_offset should probably be removed and OMAP1
- * clock code converted to use clksel.
- *
- * XXX @usecount is poorly named. It should be "enable_count" or
- * something similar. "users" in the description refers to kernel
- * code (core code or drivers) that have called clk_enable() and not
- * yet called clk_disable(); the usecount of parent clocks is also
- * incremented by the clock code when clk_enable() is called on child
- * clocks and decremented by the clock code when clk_disable() is
- * called on child clocks.
- *
- * XXX @clkdm, @usecount, @children, @sibling should be marked for
- * internal use only.
- *
- * @children and @sibling are used to optimize parent-to-child clock
- * tree traversals. (child-to-parent traversals use @parent.)
- *
- * XXX The notion of the clock's current rate probably needs to be
- * separated from the clock's target rate.
- */
-struct clk {
- struct list_head node;
- const struct clkops *ops;
- const char *name;
- struct clk *parent;
- struct list_head children;
- struct list_head sibling; /* node for children */
- unsigned long rate;
- void __iomem *enable_reg;
- unsigned long (*recalc)(struct clk *);
- int (*set_rate)(struct clk *, unsigned long);
- long (*round_rate)(struct clk *, unsigned long);
- void (*init)(struct clk *);
- u8 enable_bit;
- s8 usecount;
- u8 fixed_div;
- u8 flags;
-#ifdef CONFIG_ARCH_OMAP2PLUS
- void __iomem *clksel_reg;
- u32 clksel_mask;
- const struct clksel *clksel;
- struct dpll_data *dpll_data;
- const char *clkdm_name;
- struct clockdomain *clkdm;
-#else
- u8 rate_offset;
- u8 src_offset;
-#endif
-#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
- struct dentry *dent; /* For visible tree hierarchy */
-#endif
-};
-
-struct clk_functions {
- int (*clk_enable)(struct clk *clk);
- void (*clk_disable)(struct clk *clk);
- long (*clk_round_rate)(struct clk *clk, unsigned long rate);
- int (*clk_set_rate)(struct clk *clk, unsigned long rate);
- int (*clk_set_parent)(struct clk *clk, struct clk *parent);
- void (*clk_allow_idle)(struct clk *clk);
- void (*clk_deny_idle)(struct clk *clk);
- void (*clk_disable_unused)(struct clk *clk);
-};
-
-extern int mpurate;
-
-extern int clk_init(struct clk_functions *custom_clocks);
-extern void clk_preinit(struct clk *clk);
-extern int clk_register(struct clk *clk);
-extern void clk_reparent(struct clk *child, struct clk *parent);
-extern void clk_unregister(struct clk *clk);
-extern void propagate_rate(struct clk *clk);
-extern void recalculate_root_clocks(void);
-extern unsigned long followparent_recalc(struct clk *clk);
-extern void clk_enable_init_clocks(void);
-unsigned long omap_fixed_divisor_recalc(struct clk *clk);
-extern struct clk *omap_clk_get_by_name(const char *name);
-extern int omap_clk_enable_autoidle_all(void);
-extern int omap_clk_disable_autoidle_all(void);
-
-extern const struct clkops clkops_null;
-
-extern struct clk dummy_ck;
-
-#endif
diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h
deleted file mode 100644
index d1cb6f5..0000000
--- a/arch/arm/plat-omap/include/plat/common.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/common.h
- *
- * Header for code common to all OMAP machines.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP_COMMON_H
-#define __ARCH_ARM_MACH_OMAP_COMMON_H
-
-#include <plat/i2c.h>
-#include <plat/omap_hwmod.h>
-
-extern int __init omap_init_clocksource_32k(void __iomem *vbase);
-
-extern void __init omap_check_revision(void);
-
-extern void omap_reserve(void);
-extern int omap_dss_reset(struct omap_hwmod *);
-
-void omap_sram_init(void);
-
-#endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */
diff --git a/arch/arm/plat-omap/include/plat/counter-32k.h b/arch/arm/plat-omap/include/plat/counter-32k.h
new file mode 100644
index 0000000..da000d4
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/counter-32k.h
@@ -0,0 +1 @@
+int omap_init_clocksource_32k(void __iomem *vbase);
diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h
index 67da857..b4516ab 100644
--- a/arch/arm/plat-omap/include/plat/cpu.h
+++ b/arch/arm/plat-omap/include/plat/cpu.h
@@ -1,6 +1,4 @@
/*
- * arch/arm/plat-omap/include/mach/cpu.h
- *
* OMAP cpu type detection
*
* Copyright (C) 2004, 2008 Nokia Corporation
@@ -30,470 +28,12 @@
#ifndef __ASM_ARCH_OMAP_CPU_H
#define __ASM_ARCH_OMAP_CPU_H
-#ifndef __ASSEMBLY__
-
-#include <linux/bitops.h>
-#include <plat/multi.h>
-
-/*
- * Omap device type i.e. EMU/HS/TST/GP/BAD
- */
-#define OMAP2_DEVICE_TYPE_TEST 0
-#define OMAP2_DEVICE_TYPE_EMU 1
-#define OMAP2_DEVICE_TYPE_SEC 2
-#define OMAP2_DEVICE_TYPE_GP 3
-#define OMAP2_DEVICE_TYPE_BAD 4
-
-int omap_type(void);
-
-/*
- * omap_rev bits:
- * CPU id bits (0730, 1510, 1710, 2422...) [31:16]
- * CPU revision (See _REV_ defined in cpu.h) [15:08]
- * CPU class bits (15xx, 16xx, 24xx, 34xx...) [07:00]
- */
-unsigned int omap_rev(void);
-
-/*
- * Get the CPU revision for OMAP devices
- */
-#define GET_OMAP_REVISION() ((omap_rev() >> 8) & 0xff)
-
-/*
- * Macros to group OMAP into cpu classes.
- * These can be used in most places.
- * cpu_is_omap7xx(): True for OMAP730, OMAP850
- * cpu_is_omap15xx(): True for OMAP1510, OMAP5910 and OMAP310
- * cpu_is_omap16xx(): True for OMAP1610, OMAP5912 and OMAP1710
- * cpu_is_omap24xx(): True for OMAP2420, OMAP2422, OMAP2423, OMAP2430
- * cpu_is_omap242x(): True for OMAP2420, OMAP2422, OMAP2423
- * cpu_is_omap243x(): True for OMAP2430
- * cpu_is_omap343x(): True for OMAP3430
- * cpu_is_omap443x(): True for OMAP4430
- * cpu_is_omap446x(): True for OMAP4460
- * cpu_is_omap447x(): True for OMAP4470
- * soc_is_omap543x(): True for OMAP5430, OMAP5432
- */
-#define GET_OMAP_CLASS (omap_rev() & 0xff)
-
-#define IS_OMAP_CLASS(class, id) \
-static inline int is_omap ##class (void) \
-{ \
- return (GET_OMAP_CLASS == (id)) ? 1 : 0; \
-}
-
-#define GET_AM_CLASS ((omap_rev() >> 24) & 0xff)
-
-#define IS_AM_CLASS(class, id) \
-static inline int is_am ##class (void) \
-{ \
- return (GET_AM_CLASS == (id)) ? 1 : 0; \
-}
-
-#define GET_TI_CLASS ((omap_rev() >> 24) & 0xff)
-
-#define IS_TI_CLASS(class, id) \
-static inline int is_ti ##class (void) \
-{ \
- return (GET_TI_CLASS == (id)) ? 1 : 0; \
-}
-
-#define GET_OMAP_SUBCLASS ((omap_rev() >> 20) & 0x0fff)
-
-#define IS_OMAP_SUBCLASS(subclass, id) \
-static inline int is_omap ##subclass (void) \
-{ \
- return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \
-}
-
-#define IS_TI_SUBCLASS(subclass, id) \
-static inline int is_ti ##subclass (void) \
-{ \
- return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \
-}
-
-#define IS_AM_SUBCLASS(subclass, id) \
-static inline int is_am ##subclass (void) \
-{ \
- return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \
-}
-
-IS_OMAP_CLASS(7xx, 0x07)
-IS_OMAP_CLASS(15xx, 0x15)
-IS_OMAP_CLASS(16xx, 0x16)
-IS_OMAP_CLASS(24xx, 0x24)
-IS_OMAP_CLASS(34xx, 0x34)
-IS_OMAP_CLASS(44xx, 0x44)
-IS_AM_CLASS(35xx, 0x35)
-IS_OMAP_CLASS(54xx, 0x54)
-IS_AM_CLASS(33xx, 0x33)
-
-IS_TI_CLASS(81xx, 0x81)
-
-IS_OMAP_SUBCLASS(242x, 0x242)
-IS_OMAP_SUBCLASS(243x, 0x243)
-IS_OMAP_SUBCLASS(343x, 0x343)
-IS_OMAP_SUBCLASS(363x, 0x363)
-IS_OMAP_SUBCLASS(443x, 0x443)
-IS_OMAP_SUBCLASS(446x, 0x446)
-IS_OMAP_SUBCLASS(447x, 0x447)
-IS_OMAP_SUBCLASS(543x, 0x543)
-
-IS_TI_SUBCLASS(816x, 0x816)
-IS_TI_SUBCLASS(814x, 0x814)
-IS_AM_SUBCLASS(335x, 0x335)
-
-#define cpu_is_omap7xx() 0
-#define cpu_is_omap15xx() 0
-#define cpu_is_omap16xx() 0
-#define cpu_is_omap24xx() 0
-#define cpu_is_omap242x() 0
-#define cpu_is_omap243x() 0
-#define cpu_is_omap34xx() 0
-#define cpu_is_omap343x() 0
-#define cpu_is_ti81xx() 0
-#define cpu_is_ti816x() 0
-#define cpu_is_ti814x() 0
-#define soc_is_am35xx() 0
-#define soc_is_am33xx() 0
-#define soc_is_am335x() 0
-#define cpu_is_omap44xx() 0
-#define cpu_is_omap443x() 0
-#define cpu_is_omap446x() 0
-#define cpu_is_omap447x() 0
-#define soc_is_omap54xx() 0
-#define soc_is_omap543x() 0
-
-#if defined(MULTI_OMAP1)
-# if defined(CONFIG_ARCH_OMAP730)
-# undef cpu_is_omap7xx
-# define cpu_is_omap7xx() is_omap7xx()
-# endif
-# if defined(CONFIG_ARCH_OMAP850)
-# undef cpu_is_omap7xx
-# define cpu_is_omap7xx() is_omap7xx()
-# endif
-# if defined(CONFIG_ARCH_OMAP15XX)
-# undef cpu_is_omap15xx
-# define cpu_is_omap15xx() is_omap15xx()
-# endif
-# if defined(CONFIG_ARCH_OMAP16XX)
-# undef cpu_is_omap16xx
-# define cpu_is_omap16xx() is_omap16xx()
-# endif
-#else
-# if defined(CONFIG_ARCH_OMAP730)
-# undef cpu_is_omap7xx
-# define cpu_is_omap7xx() 1
-# endif
-# if defined(CONFIG_ARCH_OMAP850)
-# undef cpu_is_omap7xx
-# define cpu_is_omap7xx() 1
-# endif
-# if defined(CONFIG_ARCH_OMAP15XX)
-# undef cpu_is_omap15xx
-# define cpu_is_omap15xx() 1
-# endif
-# if defined(CONFIG_ARCH_OMAP16XX)
-# undef cpu_is_omap16xx
-# define cpu_is_omap16xx() 1
-# endif
+#ifdef CONFIG_ARCH_OMAP1
+#include <mach/soc.h>
#endif
-#if defined(MULTI_OMAP2)
-# if defined(CONFIG_ARCH_OMAP2)
-# undef cpu_is_omap24xx
-# define cpu_is_omap24xx() is_omap24xx()
-# endif
-# if defined (CONFIG_SOC_OMAP2420)
-# undef cpu_is_omap242x
-# define cpu_is_omap242x() is_omap242x()
-# endif
-# if defined (CONFIG_SOC_OMAP2430)
-# undef cpu_is_omap243x
-# define cpu_is_omap243x() is_omap243x()
-# endif
-# if defined(CONFIG_ARCH_OMAP3)
-# undef cpu_is_omap34xx
-# undef cpu_is_omap343x
-# define cpu_is_omap34xx() is_omap34xx()
-# define cpu_is_omap343x() is_omap343x()
-# endif
-#else
-# if defined(CONFIG_ARCH_OMAP2)
-# undef cpu_is_omap24xx
-# define cpu_is_omap24xx() 1
-# endif
-# if defined(CONFIG_SOC_OMAP2420)
-# undef cpu_is_omap242x
-# define cpu_is_omap242x() 1
-# endif
-# if defined(CONFIG_SOC_OMAP2430)
-# undef cpu_is_omap243x
-# define cpu_is_omap243x() 1
-# endif
-# if defined(CONFIG_ARCH_OMAP3)
-# undef cpu_is_omap34xx
-# define cpu_is_omap34xx() 1
-# endif
-# if defined(CONFIG_SOC_OMAP3430)
-# undef cpu_is_omap343x
-# define cpu_is_omap343x() 1
-# endif
+#ifdef CONFIG_ARCH_OMAP2PLUS
+#include "../../mach-omap2/soc.h"
#endif
-/*
- * Macros to detect individual cpu types.
- * These are only rarely needed.
- * cpu_is_omap310(): True for OMAP310
- * cpu_is_omap1510(): True for OMAP1510
- * cpu_is_omap1610(): True for OMAP1610
- * cpu_is_omap1611(): True for OMAP1611
- * cpu_is_omap5912(): True for OMAP5912
- * cpu_is_omap1621(): True for OMAP1621
- * cpu_is_omap1710(): True for OMAP1710
- * cpu_is_omap2420(): True for OMAP2420
- * cpu_is_omap2422(): True for OMAP2422
- * cpu_is_omap2423(): True for OMAP2423
- * cpu_is_omap2430(): True for OMAP2430
- * cpu_is_omap3430(): True for OMAP3430
- */
-#define GET_OMAP_TYPE ((omap_rev() >> 16) & 0xffff)
-
-#define IS_OMAP_TYPE(type, id) \
-static inline int is_omap ##type (void) \
-{ \
- return (GET_OMAP_TYPE == (id)) ? 1 : 0; \
-}
-
-IS_OMAP_TYPE(310, 0x0310)
-IS_OMAP_TYPE(1510, 0x1510)
-IS_OMAP_TYPE(1610, 0x1610)
-IS_OMAP_TYPE(1611, 0x1611)
-IS_OMAP_TYPE(5912, 0x1611)
-IS_OMAP_TYPE(1621, 0x1621)
-IS_OMAP_TYPE(1710, 0x1710)
-IS_OMAP_TYPE(2420, 0x2420)
-IS_OMAP_TYPE(2422, 0x2422)
-IS_OMAP_TYPE(2423, 0x2423)
-IS_OMAP_TYPE(2430, 0x2430)
-IS_OMAP_TYPE(3430, 0x3430)
-
-#define cpu_is_omap310() 0
-#define cpu_is_omap1510() 0
-#define cpu_is_omap1610() 0
-#define cpu_is_omap5912() 0
-#define cpu_is_omap1611() 0
-#define cpu_is_omap1621() 0
-#define cpu_is_omap1710() 0
-#define cpu_is_omap2420() 0
-#define cpu_is_omap2422() 0
-#define cpu_is_omap2423() 0
-#define cpu_is_omap2430() 0
-#define cpu_is_omap3430() 0
-#define cpu_is_omap3630() 0
-#define soc_is_omap5430() 0
-
-/*
- * Whether we have MULTI_OMAP1 or not, we still need to distinguish
- * between 310 vs. 1510 and 1611B/5912 vs. 1710.
- */
-
-#if defined(CONFIG_ARCH_OMAP15XX)
-# undef cpu_is_omap310
-# undef cpu_is_omap1510
-# define cpu_is_omap310() is_omap310()
-# define cpu_is_omap1510() is_omap1510()
-#endif
-
-#if defined(CONFIG_ARCH_OMAP16XX)
-# undef cpu_is_omap1610
-# undef cpu_is_omap1611
-# undef cpu_is_omap5912
-# undef cpu_is_omap1621
-# undef cpu_is_omap1710
-# define cpu_is_omap1610() is_omap1610()
-# define cpu_is_omap1611() is_omap1611()
-# define cpu_is_omap5912() is_omap5912()
-# define cpu_is_omap1621() is_omap1621()
-# define cpu_is_omap1710() is_omap1710()
-#endif
-
-#if defined(CONFIG_ARCH_OMAP2)
-# undef cpu_is_omap2420
-# undef cpu_is_omap2422
-# undef cpu_is_omap2423
-# undef cpu_is_omap2430
-# define cpu_is_omap2420() is_omap2420()
-# define cpu_is_omap2422() is_omap2422()
-# define cpu_is_omap2423() is_omap2423()
-# define cpu_is_omap2430() is_omap2430()
-#endif
-
-#if defined(CONFIG_ARCH_OMAP3)
-# undef cpu_is_omap3430
-# undef cpu_is_ti81xx
-# undef cpu_is_ti816x
-# undef cpu_is_ti814x
-# undef soc_is_am35xx
-# define cpu_is_omap3430() is_omap3430()
-# undef cpu_is_omap3630
-# define cpu_is_omap3630() is_omap363x()
-# define cpu_is_ti81xx() is_ti81xx()
-# define cpu_is_ti816x() is_ti816x()
-# define cpu_is_ti814x() is_ti814x()
-# define soc_is_am35xx() is_am35xx()
-#endif
-
-# if defined(CONFIG_SOC_AM33XX)
-# undef soc_is_am33xx
-# undef soc_is_am335x
-# define soc_is_am33xx() is_am33xx()
-# define soc_is_am335x() is_am335x()
-#endif
-
-# if defined(CONFIG_ARCH_OMAP4)
-# undef cpu_is_omap44xx
-# undef cpu_is_omap443x
-# undef cpu_is_omap446x
-# undef cpu_is_omap447x
-# define cpu_is_omap44xx() is_omap44xx()
-# define cpu_is_omap443x() is_omap443x()
-# define cpu_is_omap446x() is_omap446x()
-# define cpu_is_omap447x() is_omap447x()
-# endif
-
-# if defined(CONFIG_SOC_OMAP5)
-# undef soc_is_omap54xx
-# undef soc_is_omap543x
-# define soc_is_omap54xx() is_omap54xx()
-# define soc_is_omap543x() is_omap543x()
-#endif
-
-/* Macros to detect if we have OMAP1 or OMAP2 */
-#define cpu_class_is_omap1() (cpu_is_omap7xx() || cpu_is_omap15xx() || \
- cpu_is_omap16xx())
-#define cpu_class_is_omap2() (cpu_is_omap24xx() || cpu_is_omap34xx() || \
- cpu_is_omap44xx() || soc_is_omap54xx() || \
- soc_is_am33xx())
-
-/* Various silicon revisions for omap2 */
-#define OMAP242X_CLASS 0x24200024
-#define OMAP2420_REV_ES1_0 OMAP242X_CLASS
-#define OMAP2420_REV_ES2_0 (OMAP242X_CLASS | (0x1 << 8))
-
-#define OMAP243X_CLASS 0x24300024
-#define OMAP2430_REV_ES1_0 OMAP243X_CLASS
-
-#define OMAP343X_CLASS 0x34300034
-#define OMAP3430_REV_ES1_0 OMAP343X_CLASS
-#define OMAP3430_REV_ES2_0 (OMAP343X_CLASS | (0x1 << 8))
-#define OMAP3430_REV_ES2_1 (OMAP343X_CLASS | (0x2 << 8))
-#define OMAP3430_REV_ES3_0 (OMAP343X_CLASS | (0x3 << 8))
-#define OMAP3430_REV_ES3_1 (OMAP343X_CLASS | (0x4 << 8))
-#define OMAP3430_REV_ES3_1_2 (OMAP343X_CLASS | (0x5 << 8))
-
-#define OMAP363X_CLASS 0x36300034
-#define OMAP3630_REV_ES1_0 OMAP363X_CLASS
-#define OMAP3630_REV_ES1_1 (OMAP363X_CLASS | (0x1 << 8))
-#define OMAP3630_REV_ES1_2 (OMAP363X_CLASS | (0x2 << 8))
-
-#define TI816X_CLASS 0x81600034
-#define TI8168_REV_ES1_0 TI816X_CLASS
-#define TI8168_REV_ES1_1 (TI816X_CLASS | (0x1 << 8))
-
-#define TI814X_CLASS 0x81400034
-#define TI8148_REV_ES1_0 TI814X_CLASS
-#define TI8148_REV_ES2_0 (TI814X_CLASS | (0x1 << 8))
-#define TI8148_REV_ES2_1 (TI814X_CLASS | (0x2 << 8))
-
-#define AM35XX_CLASS 0x35170034
-#define AM35XX_REV_ES1_0 AM35XX_CLASS
-#define AM35XX_REV_ES1_1 (AM35XX_CLASS | (0x1 << 8))
-
-#define AM335X_CLASS 0x33500033
-#define AM335X_REV_ES1_0 AM335X_CLASS
-
-#define OMAP443X_CLASS 0x44300044
-#define OMAP4430_REV_ES1_0 (OMAP443X_CLASS | (0x10 << 8))
-#define OMAP4430_REV_ES2_0 (OMAP443X_CLASS | (0x20 << 8))
-#define OMAP4430_REV_ES2_1 (OMAP443X_CLASS | (0x21 << 8))
-#define OMAP4430_REV_ES2_2 (OMAP443X_CLASS | (0x22 << 8))
-#define OMAP4430_REV_ES2_3 (OMAP443X_CLASS | (0x23 << 8))
-
-#define OMAP446X_CLASS 0x44600044
-#define OMAP4460_REV_ES1_0 (OMAP446X_CLASS | (0x10 << 8))
-#define OMAP4460_REV_ES1_1 (OMAP446X_CLASS | (0x11 << 8))
-
-#define OMAP447X_CLASS 0x44700044
-#define OMAP4470_REV_ES1_0 (OMAP447X_CLASS | (0x10 << 8))
-
-#define OMAP54XX_CLASS 0x54000054
-#define OMAP5430_REV_ES1_0 (OMAP54XX_CLASS | (0x30 << 16) | (0x10 << 8))
-#define OMAP5432_REV_ES1_0 (OMAP54XX_CLASS | (0x32 << 16) | (0x10 << 8))
-
-void omap2xxx_check_revision(void);
-void omap3xxx_check_revision(void);
-void omap4xxx_check_revision(void);
-void omap5xxx_check_revision(void);
-void omap3xxx_check_features(void);
-void ti81xx_check_features(void);
-void omap4xxx_check_features(void);
-
-/*
- * Runtime detection of OMAP3 features
- *
- * OMAP3_HAS_IO_CHAIN_CTRL: Some later members of the OMAP3 chip
- * family have OS-level control over the I/O chain clock. This is
- * to avoid a window during which wakeups could potentially be lost
- * during powerdomain transitions. If this bit is set, it
- * indicates that the chip does support OS-level control of this
- * feature.
- */
-extern u32 omap_features;
-
-#define OMAP3_HAS_L2CACHE BIT(0)
-#define OMAP3_HAS_IVA BIT(1)
-#define OMAP3_HAS_SGX BIT(2)
-#define OMAP3_HAS_NEON BIT(3)
-#define OMAP3_HAS_ISP BIT(4)
-#define OMAP3_HAS_192MHZ_CLK BIT(5)
-#define OMAP3_HAS_IO_WAKEUP BIT(6)
-#define OMAP3_HAS_SDRC BIT(7)
-#define OMAP3_HAS_IO_CHAIN_CTRL BIT(8)
-#define OMAP4_HAS_MPU_1GHZ BIT(9)
-#define OMAP4_HAS_MPU_1_2GHZ BIT(10)
-#define OMAP4_HAS_MPU_1_5GHZ BIT(11)
-
-
-#define OMAP3_HAS_FEATURE(feat,flag) \
-static inline unsigned int omap3_has_ ##feat(void) \
-{ \
- return omap_features & OMAP3_HAS_ ##flag; \
-} \
-
-OMAP3_HAS_FEATURE(l2cache, L2CACHE)
-OMAP3_HAS_FEATURE(sgx, SGX)
-OMAP3_HAS_FEATURE(iva, IVA)
-OMAP3_HAS_FEATURE(neon, NEON)
-OMAP3_HAS_FEATURE(isp, ISP)
-OMAP3_HAS_FEATURE(192mhz_clk, 192MHZ_CLK)
-OMAP3_HAS_FEATURE(io_wakeup, IO_WAKEUP)
-OMAP3_HAS_FEATURE(sdrc, SDRC)
-OMAP3_HAS_FEATURE(io_chain_ctrl, IO_CHAIN_CTRL)
-
-/*
- * Runtime detection of OMAP4 features
- */
-#define OMAP4_HAS_FEATURE(feat, flag) \
-static inline unsigned int omap4_has_ ##feat(void) \
-{ \
- return omap_features & OMAP4_HAS_ ##flag; \
-} \
-
-OMAP4_HAS_FEATURE(mpu_1ghz, MPU_1GHZ)
-OMAP4_HAS_FEATURE(mpu_1_2ghz, MPU_1_2GHZ)
-OMAP4_HAS_FEATURE(mpu_1_5ghz, MPU_1_5GHZ)
-
-#endif /* __ASSEMBLY__ */
#endif
diff --git a/arch/arm/plat-omap/include/plat/debug-devices.h b/arch/arm/plat-omap/include/plat/debug-devices.h
new file mode 100644
index 0000000..8fc4287
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/debug-devices.h
@@ -0,0 +1,2 @@
+/* for TI reference platforms sharing the same debug card */
+extern int debug_card_init(u32 addr, unsigned gpio);
diff --git a/arch/arm/plat-omap/include/plat/dma-44xx.h b/arch/arm/plat-omap/include/plat/dma-44xx.h
deleted file mode 100644
index 1f767cb..0000000
--- a/arch/arm/plat-omap/include/plat/dma-44xx.h
+++ /dev/null
@@ -1,147 +0,0 @@
-/*
- * OMAP4 SDMA channel definitions
- *
- * Copyright (C) 2009-2010 Texas Instruments, Inc.
- * Copyright (C) 2009-2010 Nokia Corporation
- *
- * Santosh Shilimkar (santosh.shilimkar@ti.com)
- * Benoit Cousson (b-cousson@ti.com)
- * Paul Walmsley (paul@pwsan.com)
- *
- * This file is automatically generated from the OMAP hardware databases.
- * We respectfully ask that any modifications to this file be coordinated
- * with the public linux-omap@vger.kernel.org mailing list and the
- * authors above to ensure that the autogeneration scripts are kept
- * up-to-date with the file contents.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_OMAP44XX_DMA_H
-#define __ARCH_ARM_MACH_OMAP2_OMAP44XX_DMA_H
-
-#define OMAP44XX_DMA_SYS_REQ0 2
-#define OMAP44XX_DMA_SYS_REQ1 3
-#define OMAP44XX_DMA_GPMC 4
-#define OMAP44XX_DMA_DSS_DISPC_REQ 6
-#define OMAP44XX_DMA_SYS_REQ2 7
-#define OMAP44XX_DMA_MCASP1_AXEVT 8
-#define OMAP44XX_DMA_ISS_REQ1 9
-#define OMAP44XX_DMA_ISS_REQ2 10
-#define OMAP44XX_DMA_MCASP1_AREVT 11
-#define OMAP44XX_DMA_ISS_REQ3 12
-#define OMAP44XX_DMA_ISS_REQ4 13
-#define OMAP44XX_DMA_DSS_RFBI_REQ 14
-#define OMAP44XX_DMA_SPI3_TX0 15
-#define OMAP44XX_DMA_SPI3_RX0 16
-#define OMAP44XX_DMA_MCBSP2_TX 17
-#define OMAP44XX_DMA_MCBSP2_RX 18
-#define OMAP44XX_DMA_MCBSP3_TX 19
-#define OMAP44XX_DMA_MCBSP3_RX 20
-#define OMAP44XX_DMA_C2C_SSCM_GPO0 21
-#define OMAP44XX_DMA_C2C_SSCM_GPO1 22
-#define OMAP44XX_DMA_SPI3_TX1 23
-#define OMAP44XX_DMA_SPI3_RX1 24
-#define OMAP44XX_DMA_I2C3_TX 25
-#define OMAP44XX_DMA_I2C3_RX 26
-#define OMAP44XX_DMA_I2C1_TX 27
-#define OMAP44XX_DMA_I2C1_RX 28
-#define OMAP44XX_DMA_I2C2_TX 29
-#define OMAP44XX_DMA_I2C2_RX 30
-#define OMAP44XX_DMA_MCBSP4_TX 31
-#define OMAP44XX_DMA_MCBSP4_RX 32
-#define OMAP44XX_DMA_MCBSP1_TX 33
-#define OMAP44XX_DMA_MCBSP1_RX 34
-#define OMAP44XX_DMA_SPI1_TX0 35
-#define OMAP44XX_DMA_SPI1_RX0 36
-#define OMAP44XX_DMA_SPI1_TX1 37
-#define OMAP44XX_DMA_SPI1_RX1 38
-#define OMAP44XX_DMA_SPI1_TX2 39
-#define OMAP44XX_DMA_SPI1_RX2 40
-#define OMAP44XX_DMA_SPI1_TX3 41
-#define OMAP44XX_DMA_SPI1_RX3 42
-#define OMAP44XX_DMA_SPI2_TX0 43
-#define OMAP44XX_DMA_SPI2_RX0 44
-#define OMAP44XX_DMA_SPI2_TX1 45
-#define OMAP44XX_DMA_SPI2_RX1 46
-#define OMAP44XX_DMA_MMC2_TX 47
-#define OMAP44XX_DMA_MMC2_RX 48
-#define OMAP44XX_DMA_UART1_TX 49
-#define OMAP44XX_DMA_UART1_RX 50
-#define OMAP44XX_DMA_UART2_TX 51
-#define OMAP44XX_DMA_UART2_RX 52
-#define OMAP44XX_DMA_UART3_TX 53
-#define OMAP44XX_DMA_UART3_RX 54
-#define OMAP44XX_DMA_UART4_TX 55
-#define OMAP44XX_DMA_UART4_RX 56
-#define OMAP44XX_DMA_MMC4_TX 57
-#define OMAP44XX_DMA_MMC4_RX 58
-#define OMAP44XX_DMA_MMC5_TX 59
-#define OMAP44XX_DMA_MMC5_RX 60
-#define OMAP44XX_DMA_MMC1_TX 61
-#define OMAP44XX_DMA_MMC1_RX 62
-#define OMAP44XX_DMA_SYS_REQ3 64
-#define OMAP44XX_DMA_MCPDM_UP 65
-#define OMAP44XX_DMA_MCPDM_DL 66
-#define OMAP44XX_DMA_DMIC_REQ 67
-#define OMAP44XX_DMA_C2C_SSCM_GPO2 68
-#define OMAP44XX_DMA_C2C_SSCM_GPO3 69
-#define OMAP44XX_DMA_SPI4_TX0 70
-#define OMAP44XX_DMA_SPI4_RX0 71
-#define OMAP44XX_DMA_DSS_DSI1_REQ0 72
-#define OMAP44XX_DMA_DSS_DSI1_REQ1 73
-#define OMAP44XX_DMA_DSS_DSI1_REQ2 74
-#define OMAP44XX_DMA_DSS_DSI1_REQ3 75
-#define OMAP44XX_DMA_DSS_HDMI_REQ 76
-#define OMAP44XX_DMA_MMC3_TX 77
-#define OMAP44XX_DMA_MMC3_RX 78
-#define OMAP44XX_DMA_USIM_TX 79
-#define OMAP44XX_DMA_USIM_RX 80
-#define OMAP44XX_DMA_DSS_DSI2_REQ0 81
-#define OMAP44XX_DMA_DSS_DSI2_REQ1 82
-#define OMAP44XX_DMA_DSS_DSI2_REQ2 83
-#define OMAP44XX_DMA_DSS_DSI2_REQ3 84
-#define OMAP44XX_DMA_SLIMBUS1_TX0 85
-#define OMAP44XX_DMA_SLIMBUS1_TX1 86
-#define OMAP44XX_DMA_SLIMBUS1_TX2 87
-#define OMAP44XX_DMA_SLIMBUS1_TX3 88
-#define OMAP44XX_DMA_SLIMBUS1_RX0 89
-#define OMAP44XX_DMA_SLIMBUS1_RX1 90
-#define OMAP44XX_DMA_SLIMBUS1_RX2 91
-#define OMAP44XX_DMA_SLIMBUS1_RX3 92
-#define OMAP44XX_DMA_SLIMBUS2_TX0 93
-#define OMAP44XX_DMA_SLIMBUS2_TX1 94
-#define OMAP44XX_DMA_SLIMBUS2_TX2 95
-#define OMAP44XX_DMA_SLIMBUS2_TX3 96
-#define OMAP44XX_DMA_SLIMBUS2_RX0 97
-#define OMAP44XX_DMA_SLIMBUS2_RX1 98
-#define OMAP44XX_DMA_SLIMBUS2_RX2 99
-#define OMAP44XX_DMA_SLIMBUS2_RX3 100
-#define OMAP44XX_DMA_ABE_REQ_0 101
-#define OMAP44XX_DMA_ABE_REQ_1 102
-#define OMAP44XX_DMA_ABE_REQ_2 103
-#define OMAP44XX_DMA_ABE_REQ_3 104
-#define OMAP44XX_DMA_ABE_REQ_4 105
-#define OMAP44XX_DMA_ABE_REQ_5 106
-#define OMAP44XX_DMA_ABE_REQ_6 107
-#define OMAP44XX_DMA_ABE_REQ_7 108
-#define OMAP44XX_DMA_AES1_P_CTX_IN_REQ 109
-#define OMAP44XX_DMA_AES1_P_DATA_IN_REQ 110
-#define OMAP44XX_DMA_AES1_P_DATA_OUT_REQ 111
-#define OMAP44XX_DMA_AES2_P_CTX_IN_REQ 112
-#define OMAP44XX_DMA_AES2_P_DATA_IN_REQ 113
-#define OMAP44XX_DMA_AES2_P_DATA_OUT_REQ 114
-#define OMAP44XX_DMA_DES_P_CTX_IN_REQ 115
-#define OMAP44XX_DMA_DES_P_DATA_IN_REQ 116
-#define OMAP44XX_DMA_DES_P_DATA_OUT_REQ 117
-#define OMAP44XX_DMA_SHA2_CTXIN_P 118
-#define OMAP44XX_DMA_SHA2_DIN_P 119
-#define OMAP44XX_DMA_SHA2_CTXOUT_P 120
-#define OMAP44XX_DMA_AES1_P_CONTEXT_OUT_REQ 121
-#define OMAP44XX_DMA_AES2_P_CONTEXT_OUT_REQ 122
-#define OMAP44XX_DMA_I2C4_TX 124
-#define OMAP44XX_DMA_I2C4_RX 125
-
-#endif
diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h
index 85868e9..3f5b9cf 100644
--- a/arch/arm/plat-omap/include/plat/dmtimer.h
+++ b/arch/arm/plat-omap/include/plat/dmtimer.h
@@ -94,6 +94,7 @@
/* set_timer_src - Only used for OMAP1 devices */
int (*set_timer_src)(struct platform_device *pdev, int source);
u32 timer_capability;
+ int (*get_context_loss_count)(struct device *);
};
int omap_dm_timer_reserve_systimer(int id);
@@ -263,6 +264,7 @@
unsigned reserved:1;
unsigned posted:1;
struct timer_regs context;
+ int (*get_context_loss_count)(struct device *);
int ctx_loss_count;
int revision;
u32 capability;
diff --git a/arch/arm/plat-omap/include/plat/fpga.h b/arch/arm/plat-omap/include/plat/fpga.h
deleted file mode 100644
index bd3c632..0000000
--- a/arch/arm/plat-omap/include/plat/fpga.h
+++ /dev/null
@@ -1,193 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/fpga.h
- *
- * Interrupt handler for OMAP-1510 FPGA
- *
- * Copyright (C) 2001 RidgeRun, Inc.
- * Author: Greg Lonnon <glonnon@ridgerun.com>
- *
- * Copyright (C) 2002 MontaVista Software, Inc.
- *
- * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6
- * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_OMAP_FPGA_H
-#define __ASM_ARCH_OMAP_FPGA_H
-
-extern void omap1510_fpga_init_irq(void);
-
-#define fpga_read(reg) __raw_readb(reg)
-#define fpga_write(val, reg) __raw_writeb(val, reg)
-
-/*
- * ---------------------------------------------------------------------------
- * H2/P2 Debug board FPGA
- * ---------------------------------------------------------------------------
- */
-/* maps in the FPGA registers and the ETHR registers */
-#define H2P2_DBG_FPGA_BASE 0xE8000000 /* VA */
-#define H2P2_DBG_FPGA_SIZE SZ_4K /* SIZE */
-#define H2P2_DBG_FPGA_START 0x04000000 /* PA */
-
-#define H2P2_DBG_FPGA_ETHR_START (H2P2_DBG_FPGA_START + 0x300)
-#define H2P2_DBG_FPGA_FPGA_REV IOMEM(H2P2_DBG_FPGA_BASE + 0x10) /* FPGA Revision */
-#define H2P2_DBG_FPGA_BOARD_REV IOMEM(H2P2_DBG_FPGA_BASE + 0x12) /* Board Revision */
-#define H2P2_DBG_FPGA_GPIO IOMEM(H2P2_DBG_FPGA_BASE + 0x14) /* GPIO outputs */
-#define H2P2_DBG_FPGA_LEDS IOMEM(H2P2_DBG_FPGA_BASE + 0x16) /* LEDs outputs */
-#define H2P2_DBG_FPGA_MISC_INPUTS IOMEM(H2P2_DBG_FPGA_BASE + 0x18) /* Misc inputs */
-#define H2P2_DBG_FPGA_LAN_STATUS IOMEM(H2P2_DBG_FPGA_BASE + 0x1A) /* LAN Status line */
-#define H2P2_DBG_FPGA_LAN_RESET IOMEM(H2P2_DBG_FPGA_BASE + 0x1C) /* LAN Reset line */
-
-/* NOTE: most boards don't have a static mapping for the FPGA ... */
-struct h2p2_dbg_fpga {
- /* offset 0x00 */
- u16 smc91x[8];
- /* offset 0x10 */
- u16 fpga_rev;
- u16 board_rev;
- u16 gpio_outputs;
- u16 leds;
- /* offset 0x18 */
- u16 misc_inputs;
- u16 lan_status;
- u16 lan_reset;
- u16 reserved0;
- /* offset 0x20 */
- u16 ps2_data;
- u16 ps2_ctrl;
- /* plus also 4 rs232 ports ... */
-};
-
-/* LEDs definition on debug board (16 LEDs, all physically green) */
-#define H2P2_DBG_FPGA_LED_GREEN (1 << 15)
-#define H2P2_DBG_FPGA_LED_AMBER (1 << 14)
-#define H2P2_DBG_FPGA_LED_RED (1 << 13)
-#define H2P2_DBG_FPGA_LED_BLUE (1 << 12)
-/* cpu0 load-meter LEDs */
-#define H2P2_DBG_FPGA_LOAD_METER (1 << 0) // A bit of fun on our board ...
-#define H2P2_DBG_FPGA_LOAD_METER_SIZE 11
-#define H2P2_DBG_FPGA_LOAD_METER_MASK ((1 << H2P2_DBG_FPGA_LOAD_METER_SIZE) - 1)
-
-#define H2P2_DBG_FPGA_P2_LED_TIMER (1 << 0)
-#define H2P2_DBG_FPGA_P2_LED_IDLE (1 << 1)
-
-/*
- * ---------------------------------------------------------------------------
- * OMAP-1510 FPGA
- * ---------------------------------------------------------------------------
- */
-#define OMAP1510_FPGA_BASE 0xE8000000 /* VA */
-#define OMAP1510_FPGA_SIZE SZ_4K
-#define OMAP1510_FPGA_START 0x08000000 /* PA */
-
-/* Revision */
-#define OMAP1510_FPGA_REV_LOW IOMEM(OMAP1510_FPGA_BASE + 0x0)
-#define OMAP1510_FPGA_REV_HIGH IOMEM(OMAP1510_FPGA_BASE + 0x1)
-
-#define OMAP1510_FPGA_LCD_PANEL_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x2)
-#define OMAP1510_FPGA_LED_DIGIT IOMEM(OMAP1510_FPGA_BASE + 0x3)
-#define INNOVATOR_FPGA_HID_SPI IOMEM(OMAP1510_FPGA_BASE + 0x4)
-#define OMAP1510_FPGA_POWER IOMEM(OMAP1510_FPGA_BASE + 0x5)
-
-/* Interrupt status */
-#define OMAP1510_FPGA_ISR_LO IOMEM(OMAP1510_FPGA_BASE + 0x6)
-#define OMAP1510_FPGA_ISR_HI IOMEM(OMAP1510_FPGA_BASE + 0x7)
-
-/* Interrupt mask */
-#define OMAP1510_FPGA_IMR_LO IOMEM(OMAP1510_FPGA_BASE + 0x8)
-#define OMAP1510_FPGA_IMR_HI IOMEM(OMAP1510_FPGA_BASE + 0x9)
-
-/* Reset registers */
-#define OMAP1510_FPGA_HOST_RESET IOMEM(OMAP1510_FPGA_BASE + 0xa)
-#define OMAP1510_FPGA_RST IOMEM(OMAP1510_FPGA_BASE + 0xb)
-
-#define OMAP1510_FPGA_AUDIO IOMEM(OMAP1510_FPGA_BASE + 0xc)
-#define OMAP1510_FPGA_DIP IOMEM(OMAP1510_FPGA_BASE + 0xe)
-#define OMAP1510_FPGA_FPGA_IO IOMEM(OMAP1510_FPGA_BASE + 0xf)
-#define OMAP1510_FPGA_UART1 IOMEM(OMAP1510_FPGA_BASE + 0x14)
-#define OMAP1510_FPGA_UART2 IOMEM(OMAP1510_FPGA_BASE + 0x15)
-#define OMAP1510_FPGA_OMAP1510_STATUS IOMEM(OMAP1510_FPGA_BASE + 0x16)
-#define OMAP1510_FPGA_BOARD_REV IOMEM(OMAP1510_FPGA_BASE + 0x18)
-#define OMAP1510P1_PPT_DATA IOMEM(OMAP1510_FPGA_BASE + 0x100)
-#define OMAP1510P1_PPT_STATUS IOMEM(OMAP1510_FPGA_BASE + 0x101)
-#define OMAP1510P1_PPT_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x102)
-
-#define OMAP1510_FPGA_TOUCHSCREEN IOMEM(OMAP1510_FPGA_BASE + 0x204)
-
-#define INNOVATOR_FPGA_INFO IOMEM(OMAP1510_FPGA_BASE + 0x205)
-#define INNOVATOR_FPGA_LCD_BRIGHT_LO IOMEM(OMAP1510_FPGA_BASE + 0x206)
-#define INNOVATOR_FPGA_LCD_BRIGHT_HI IOMEM(OMAP1510_FPGA_BASE + 0x207)
-#define INNOVATOR_FPGA_LED_GRN_LO IOMEM(OMAP1510_FPGA_BASE + 0x208)
-#define INNOVATOR_FPGA_LED_GRN_HI IOMEM(OMAP1510_FPGA_BASE + 0x209)
-#define INNOVATOR_FPGA_LED_RED_LO IOMEM(OMAP1510_FPGA_BASE + 0x20a)
-#define INNOVATOR_FPGA_LED_RED_HI IOMEM(OMAP1510_FPGA_BASE + 0x20b)
-#define INNOVATOR_FPGA_CAM_USB_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x20c)
-#define INNOVATOR_FPGA_EXP_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x20d)
-#define INNOVATOR_FPGA_ISR2 IOMEM(OMAP1510_FPGA_BASE + 0x20e)
-#define INNOVATOR_FPGA_IMR2 IOMEM(OMAP1510_FPGA_BASE + 0x210)
-
-#define OMAP1510_FPGA_ETHR_START (OMAP1510_FPGA_START + 0x300)
-
-/*
- * Power up Giga UART driver, turn on HID clock.
- * Turn off BT power, since we're not using it and it
- * draws power.
- */
-#define OMAP1510_FPGA_RESET_VALUE 0x42
-
-#define OMAP1510_FPGA_PCR_IF_PD0 (1 << 7)
-#define OMAP1510_FPGA_PCR_COM2_EN (1 << 6)
-#define OMAP1510_FPGA_PCR_COM1_EN (1 << 5)
-#define OMAP1510_FPGA_PCR_EXP_PD0 (1 << 4)
-#define OMAP1510_FPGA_PCR_EXP_PD1 (1 << 3)
-#define OMAP1510_FPGA_PCR_48MHZ_CLK (1 << 2)
-#define OMAP1510_FPGA_PCR_4MHZ_CLK (1 << 1)
-#define OMAP1510_FPGA_PCR_RSRVD_BIT0 (1 << 0)
-
-/*
- * Innovator/OMAP1510 FPGA HID register bit definitions
- */
-#define OMAP1510_FPGA_HID_SCLK (1<<0) /* output */
-#define OMAP1510_FPGA_HID_MOSI (1<<1) /* output */
-#define OMAP1510_FPGA_HID_nSS (1<<2) /* output 0/1 chip idle/select */
-#define OMAP1510_FPGA_HID_nHSUS (1<<3) /* output 0/1 host active/suspended */
-#define OMAP1510_FPGA_HID_MISO (1<<4) /* input */
-#define OMAP1510_FPGA_HID_ATN (1<<5) /* input 0/1 chip idle/ATN */
-#define OMAP1510_FPGA_HID_rsrvd (1<<6)
-#define OMAP1510_FPGA_HID_RESETn (1<<7) /* output - 0/1 USAR reset/run */
-
-/* The FPGA IRQ is cascaded through GPIO_13 */
-#define OMAP1510_INT_FPGA (IH_GPIO_BASE + 13)
-
-/* IRQ Numbers for interrupts muxed through the FPGA */
-#define OMAP1510_INT_FPGA_ATN (OMAP_FPGA_IRQ_BASE + 0)
-#define OMAP1510_INT_FPGA_ACK (OMAP_FPGA_IRQ_BASE + 1)
-#define OMAP1510_INT_FPGA2 (OMAP_FPGA_IRQ_BASE + 2)
-#define OMAP1510_INT_FPGA3 (OMAP_FPGA_IRQ_BASE + 3)
-#define OMAP1510_INT_FPGA4 (OMAP_FPGA_IRQ_BASE + 4)
-#define OMAP1510_INT_FPGA5 (OMAP_FPGA_IRQ_BASE + 5)
-#define OMAP1510_INT_FPGA6 (OMAP_FPGA_IRQ_BASE + 6)
-#define OMAP1510_INT_FPGA7 (OMAP_FPGA_IRQ_BASE + 7)
-#define OMAP1510_INT_FPGA8 (OMAP_FPGA_IRQ_BASE + 8)
-#define OMAP1510_INT_FPGA9 (OMAP_FPGA_IRQ_BASE + 9)
-#define OMAP1510_INT_FPGA10 (OMAP_FPGA_IRQ_BASE + 10)
-#define OMAP1510_INT_FPGA11 (OMAP_FPGA_IRQ_BASE + 11)
-#define OMAP1510_INT_FPGA12 (OMAP_FPGA_IRQ_BASE + 12)
-#define OMAP1510_INT_ETHER (OMAP_FPGA_IRQ_BASE + 13)
-#define OMAP1510_INT_FPGAUART1 (OMAP_FPGA_IRQ_BASE + 14)
-#define OMAP1510_INT_FPGAUART2 (OMAP_FPGA_IRQ_BASE + 15)
-#define OMAP1510_INT_FPGA_TS (OMAP_FPGA_IRQ_BASE + 16)
-#define OMAP1510_INT_FPGA17 (OMAP_FPGA_IRQ_BASE + 17)
-#define OMAP1510_INT_FPGA_CAM (OMAP_FPGA_IRQ_BASE + 18)
-#define OMAP1510_INT_FPGA_RTC_A (OMAP_FPGA_IRQ_BASE + 19)
-#define OMAP1510_INT_FPGA_RTC_B (OMAP_FPGA_IRQ_BASE + 20)
-#define OMAP1510_INT_FPGA_CD (OMAP_FPGA_IRQ_BASE + 21)
-#define OMAP1510_INT_FPGA22 (OMAP_FPGA_IRQ_BASE + 22)
-#define OMAP1510_INT_FPGA23 (OMAP_FPGA_IRQ_BASE + 23)
-
-#endif
diff --git a/arch/arm/plat-omap/include/plat/i2c.h b/arch/arm/plat-omap/include/plat/i2c.h
index 7c22b9e..7a9028c 100644
--- a/arch/arm/plat-omap/include/plat/i2c.h
+++ b/arch/arm/plat-omap/include/plat/i2c.h
@@ -18,11 +18,15 @@
* 02110-1301 USA
*
*/
-#ifndef __ASM__ARCH_OMAP_I2C_H
-#define __ASM__ARCH_OMAP_I2C_H
-#include <linux/i2c.h>
-#include <linux/i2c-omap.h>
+#ifndef __PLAT_OMAP_I2C_H
+#define __PLAT_OMAP_I2C_H
+
+struct i2c_board_info;
+struct omap_i2c_bus_platform_data;
+
+int omap_i2c_add_bus(struct omap_i2c_bus_platform_data *i2c_pdata,
+ int bus_id);
#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE)
extern int omap_register_i2c_bus(int bus_id, u32 clkrate,
@@ -37,23 +41,7 @@
}
#endif
-/**
- * i2c_dev_attr - OMAP I2C controller device attributes for omap_hwmod
- * @fifo_depth: total controller FIFO size (in bytes)
- * @flags: differences in hardware support capability
- *
- * @fifo_depth represents what exists on the hardware, not what is
- * actually configured at runtime by the device driver.
- */
-struct omap_i2c_dev_attr {
- u8 fifo_depth;
- u32 flags;
-};
-
-void __init omap1_i2c_mux_pins(int bus_id);
-void __init omap2_i2c_mux_pins(int bus_id);
-
struct omap_hwmod;
int omap_i2c_reset(struct omap_hwmod *oh);
-#endif /* __ASM__ARCH_OMAP_I2C_H */
+#endif /* __PLAT_OMAP_I2C_H */
diff --git a/arch/arm/plat-omap/include/plat/multi.h b/arch/arm/plat-omap/include/plat/multi.h
deleted file mode 100644
index 324d31b..0000000
--- a/arch/arm/plat-omap/include/plat/multi.h
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- * Support for compiling in multiple OMAP processors
- *
- * Copyright (C) 2010 Nokia Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#ifndef __PLAT_OMAP_MULTI_H
-#define __PLAT_OMAP_MULTI_H
-
-/*
- * Test if multicore OMAP support is needed
- */
-#undef MULTI_OMAP1
-#undef MULTI_OMAP2
-#undef OMAP_NAME
-
-#ifdef CONFIG_ARCH_OMAP730
-# ifdef OMAP_NAME
-# undef MULTI_OMAP1
-# define MULTI_OMAP1
-# else
-# define OMAP_NAME omap730
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP850
-# ifdef OMAP_NAME
-# undef MULTI_OMAP1
-# define MULTI_OMAP1
-# else
-# define OMAP_NAME omap850
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP15XX
-# ifdef OMAP_NAME
-# undef MULTI_OMAP1
-# define MULTI_OMAP1
-# else
-# define OMAP_NAME omap1510
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP16XX
-# ifdef OMAP_NAME
-# undef MULTI_OMAP1
-# define MULTI_OMAP1
-# else
-# define OMAP_NAME omap16xx
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP2PLUS
-# if (defined(OMAP_NAME) || defined(MULTI_OMAP1))
-# error "OMAP1 and OMAP2PLUS can't be selected at the same time"
-# endif
-#endif
-#ifdef CONFIG_SOC_OMAP2420
-# ifdef OMAP_NAME
-# undef MULTI_OMAP2
-# define MULTI_OMAP2
-# else
-# define OMAP_NAME omap2420
-# endif
-#endif
-#ifdef CONFIG_SOC_OMAP2430
-# ifdef OMAP_NAME
-# undef MULTI_OMAP2
-# define MULTI_OMAP2
-# else
-# define OMAP_NAME omap2430
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP3
-# ifdef OMAP_NAME
-# undef MULTI_OMAP2
-# define MULTI_OMAP2
-# else
-# define OMAP_NAME omap3
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP4
-# ifdef OMAP_NAME
-# undef MULTI_OMAP2
-# define MULTI_OMAP2
-# else
-# define OMAP_NAME omap4
-# endif
-#endif
-
-#ifdef CONFIG_SOC_OMAP5
-# ifdef OMAP_NAME
-# undef MULTI_OMAP2
-# define MULTI_OMAP2
-# else
-# define OMAP_NAME omap5
-# endif
-#endif
-
-#ifdef CONFIG_SOC_AM33XX
-# ifdef OMAP_NAME
-# undef MULTI_OMAP2
-# define MULTI_OMAP2
-# else
-# define OMAP_NAME am33xx
-# endif
-#endif
-
-#endif /* __PLAT_OMAP_MULTI_H */
diff --git a/arch/arm/plat-omap/include/plat/omap-secure.h b/arch/arm/plat-omap/include/plat/omap-secure.h
deleted file mode 100644
index 0e4acd2..0000000
--- a/arch/arm/plat-omap/include/plat/omap-secure.h
+++ /dev/null
@@ -1,14 +0,0 @@
-#ifndef __OMAP_SECURE_H__
-#define __OMAP_SECURE_H__
-
-#include <linux/types.h>
-
-extern int omap_secure_ram_reserve_memblock(void);
-
-#ifdef CONFIG_OMAP4_ERRATA_I688
-extern int omap_barrier_reserve_memblock(void);
-#else
-static inline void omap_barrier_reserve_memblock(void)
-{ }
-#endif
-#endif /* __OMAP_SECURE_H__ */
diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h
index f4a4cd0..1957a851 100644
--- a/arch/arm/plat-omap/include/plat/omap-serial.h
+++ b/arch/arm/plat-omap/include/plat/omap-serial.h
@@ -40,10 +40,10 @@
#define OMAP_UART_WER_MOD_WKUP 0X7F
/* Enable XON/XOFF flow control on output */
-#define OMAP_UART_SW_TX 0x8
+#define OMAP_UART_SW_TX 0x04
/* Enable XON/XOFF flow control on input */
-#define OMAP_UART_SW_RX 0x2
+#define OMAP_UART_SW_RX 0x04
#define OMAP_UART_SYSC_RESET 0X07
#define OMAP_UART_TCR_TRIG 0X0F
diff --git a/arch/arm/plat-omap/include/plat/prcm.h b/arch/arm/plat-omap/include/plat/prcm.h
deleted file mode 100644
index 267f43b..0000000
--- a/arch/arm/plat-omap/include/plat/prcm.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/prcm.h
- *
- * Access definations for use in OMAP24XX clock and power management
- *
- * Copyright (C) 2005 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * XXX This file is deprecated. The PRCM is an OMAP2+-only subsystem,
- * so this file doesn't belong in plat-omap/include/plat. Please
- * do not add anything new to this file.
- */
-
-#ifndef __ASM_ARM_ARCH_OMAP_PRCM_H
-#define __ASM_ARM_ARCH_OMAP_PRCM_H
-
-u32 omap_prcm_get_reset_sources(void);
-int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, u8 idlest,
- const char *name);
-
-#endif
-
-
-
diff --git a/arch/arm/plat-omap/include/plat/sdrc.h b/arch/arm/plat-omap/include/plat/sdrc.h
deleted file mode 100644
index 36d6a76..0000000
--- a/arch/arm/plat-omap/include/plat/sdrc.h
+++ /dev/null
@@ -1,164 +0,0 @@
-#ifndef ____ASM_ARCH_SDRC_H
-#define ____ASM_ARCH_SDRC_H
-
-/*
- * OMAP2/3 SDRC/SMS register definitions
- *
- * Copyright (C) 2007-2008 Texas Instruments, Inc.
- * Copyright (C) 2007-2008 Nokia Corporation
- *
- * Tony Lindgren
- * Paul Walmsley
- * Richard Woodruff
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-
-/* SDRC register offsets - read/write with sdrc_{read,write}_reg() */
-
-#define SDRC_SYSCONFIG 0x010
-#define SDRC_CS_CFG 0x040
-#define SDRC_SHARING 0x044
-#define SDRC_ERR_TYPE 0x04C
-#define SDRC_DLLA_CTRL 0x060
-#define SDRC_DLLA_STATUS 0x064
-#define SDRC_DLLB_CTRL 0x068
-#define SDRC_DLLB_STATUS 0x06C
-#define SDRC_POWER 0x070
-#define SDRC_MCFG_0 0x080
-#define SDRC_MR_0 0x084
-#define SDRC_EMR2_0 0x08c
-#define SDRC_ACTIM_CTRL_A_0 0x09c
-#define SDRC_ACTIM_CTRL_B_0 0x0a0
-#define SDRC_RFR_CTRL_0 0x0a4
-#define SDRC_MANUAL_0 0x0a8
-#define SDRC_MCFG_1 0x0B0
-#define SDRC_MR_1 0x0B4
-#define SDRC_EMR2_1 0x0BC
-#define SDRC_ACTIM_CTRL_A_1 0x0C4
-#define SDRC_ACTIM_CTRL_B_1 0x0C8
-#define SDRC_RFR_CTRL_1 0x0D4
-#define SDRC_MANUAL_1 0x0D8
-
-#define SDRC_POWER_AUTOCOUNT_SHIFT 8
-#define SDRC_POWER_AUTOCOUNT_MASK (0xffff << SDRC_POWER_AUTOCOUNT_SHIFT)
-#define SDRC_POWER_CLKCTRL_SHIFT 4
-#define SDRC_POWER_CLKCTRL_MASK (0x3 << SDRC_POWER_CLKCTRL_SHIFT)
-#define SDRC_SELF_REFRESH_ON_AUTOCOUNT (0x2 << SDRC_POWER_CLKCTRL_SHIFT)
-
-/*
- * These values represent the number of memory clock cycles between
- * autorefresh initiation. They assume 1 refresh per 64 ms (JEDEC), 8192
- * rows per device, and include a subtraction of a 50 cycle window in the
- * event that the autorefresh command is delayed due to other SDRC activity.
- * The '| 1' sets the ARE field to send one autorefresh when the autorefresh
- * counter reaches 0.
- *
- * These represent optimal values for common parts, it won't work for all.
- * As long as you scale down, most parameters are still work, they just
- * become sub-optimal. The RFR value goes in the opposite direction. If you
- * don't adjust it down as your clock period increases the refresh interval
- * will not be met. Setting all parameters for complete worst case may work,
- * but may cut memory performance by 2x. Due to errata the DLLs need to be
- * unlocked and their value needs run time calibration. A dynamic call is
- * need for that as no single right value exists acorss production samples.
- *
- * Only the FULL speed values are given. Current code is such that rate
- * changes must be made at DPLLoutx2. The actual value adjustment for low
- * frequency operation will be handled by omap_set_performance()
- *
- * By having the boot loader boot up in the fastest L4 speed available likely
- * will result in something which you can switch between.
- */
-#define SDRC_RFR_CTRL_165MHz (0x00044c00 | 1)
-#define SDRC_RFR_CTRL_133MHz (0x0003de00 | 1)
-#define SDRC_RFR_CTRL_100MHz (0x0002da01 | 1)
-#define SDRC_RFR_CTRL_110MHz (0x0002da01 | 1) /* Need to calc */
-#define SDRC_RFR_CTRL_BYPASS (0x00005000 | 1) /* Need to calc */
-
-
-/*
- * SMS register access
- */
-
-#define OMAP242X_SMS_REGADDR(reg) \
- (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE + reg)
-#define OMAP243X_SMS_REGADDR(reg) \
- (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE + reg)
-#define OMAP343X_SMS_REGADDR(reg) \
- (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE + reg)
-
-/* SMS register offsets - read/write with sms_{read,write}_reg() */
-
-#define SMS_SYSCONFIG 0x010
-#define SMS_ROT_CONTROL(context) (0x180 + 0x10 * context)
-#define SMS_ROT_SIZE(context) (0x184 + 0x10 * context)
-#define SMS_ROT_PHYSICAL_BA(context) (0x188 + 0x10 * context)
-/* REVISIT: fill in other SMS registers here */
-
-
-#ifndef __ASSEMBLER__
-
-/**
- * struct omap_sdrc_params - SDRC parameters for a given SDRC clock rate
- * @rate: SDRC clock rate (in Hz)
- * @actim_ctrla: Value to program to SDRC_ACTIM_CTRLA for this rate
- * @actim_ctrlb: Value to program to SDRC_ACTIM_CTRLB for this rate
- * @rfr_ctrl: Value to program to SDRC_RFR_CTRL for this rate
- * @mr: Value to program to SDRC_MR for this rate
- *
- * This structure holds a pre-computed set of register values for the
- * SDRC for a given SDRC clock rate and SDRAM chip. These are
- * intended to be pre-computed and specified in an array in the board-*.c
- * files. The structure is keyed off the 'rate' field.
- */
-struct omap_sdrc_params {
- unsigned long rate;
- u32 actim_ctrla;
- u32 actim_ctrlb;
- u32 rfr_ctrl;
- u32 mr;
-};
-
-#ifdef CONFIG_SOC_HAS_OMAP2_SDRC
-void omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
- struct omap_sdrc_params *sdrc_cs1);
-#else
-static inline void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
- struct omap_sdrc_params *sdrc_cs1) {};
-#endif
-
-int omap2_sdrc_get_params(unsigned long r,
- struct omap_sdrc_params **sdrc_cs0,
- struct omap_sdrc_params **sdrc_cs1);
-void omap2_sms_save_context(void);
-void omap2_sms_restore_context(void);
-
-void omap2_sms_write_rot_control(u32 val, unsigned ctx);
-void omap2_sms_write_rot_size(u32 val, unsigned ctx);
-void omap2_sms_write_rot_physical_ba(u32 val, unsigned ctx);
-
-#ifdef CONFIG_ARCH_OMAP2
-
-struct memory_timings {
- u32 m_type; /* ddr = 1, sdr = 0 */
- u32 dll_mode; /* use lock mode = 1, unlock mode = 0 */
- u32 slow_dll_ctrl; /* unlock mode, dll value for slow speed */
- u32 fast_dll_ctrl; /* unlock mode, dll value for fast speed */
- u32 base_cs; /* base chip select to use for calculations */
-};
-
-extern void omap2xxx_sdrc_init_params(u32 force_lock_to_unlock_mode);
-struct omap_sdrc_params *rx51_get_sdram_timings(void);
-
-u32 omap2xxx_sdrc_dll_is_unlocked(void);
-u32 omap2xxx_sdrc_reprogram(u32 level, u32 force);
-
-#endif /* CONFIG_ARCH_OMAP2 */
-
-#endif /* __ASSEMBLER__ */
-
-#endif
diff --git a/arch/arm/plat-omap/include/plat/sram.h b/arch/arm/plat-omap/include/plat/sram.h
index 227ae26..ba45250 100644
--- a/arch/arm/plat-omap/include/plat/sram.h
+++ b/arch/arm/plat-omap/include/plat/sram.h
@@ -1,18 +1,8 @@
-/*
- * arch/arm/plat-omap/include/mach/sram.h
- *
- * Interface for functions that need to be run in internal SRAM
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
+int omap_sram_init(void);
-#ifndef __ARCH_ARM_OMAP_SRAM_H
-#define __ARCH_ARM_OMAP_SRAM_H
-
-#ifndef __ASSEMBLY__
-#include <asm/fncpy.h>
+void omap_map_sram(unsigned long start, unsigned long size,
+ unsigned long skip, int cached);
+void omap_sram_reset(void);
extern void *omap_sram_push_address(unsigned long size);
@@ -24,82 +14,3 @@
_res = fncpy(_sram_address, &(funcp), size); \
_res; \
})
-
-extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl);
-
-extern void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
- u32 base_cs, u32 force_unlock);
-extern void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
- u32 mem_type);
-extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
-
-extern u32 omap3_configure_core_dpll(
- u32 m2, u32 unlock_dll, u32 f, u32 inc,
- u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
- u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
- u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
- u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
-extern void omap3_sram_restore_context(void);
-
-/* Do not use these */
-extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
-extern unsigned long omap1_sram_reprogram_clock_sz;
-
-extern void omap24xx_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
-extern unsigned long omap24xx_sram_reprogram_clock_sz;
-
-extern void omap242x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
- u32 base_cs, u32 force_unlock);
-extern unsigned long omap242x_sram_ddr_init_sz;
-
-extern u32 omap242x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val,
- int bypass);
-extern unsigned long omap242x_sram_set_prcm_sz;
-
-extern void omap242x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
- u32 mem_type);
-extern unsigned long omap242x_sram_reprogram_sdrc_sz;
-
-
-extern void omap243x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
- u32 base_cs, u32 force_unlock);
-extern unsigned long omap243x_sram_ddr_init_sz;
-
-extern u32 omap243x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val,
- int bypass);
-extern unsigned long omap243x_sram_set_prcm_sz;
-
-extern void omap243x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
- u32 mem_type);
-extern unsigned long omap243x_sram_reprogram_sdrc_sz;
-
-extern u32 omap3_sram_configure_core_dpll(
- u32 m2, u32 unlock_dll, u32 f, u32 inc,
- u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
- u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
- u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
- u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
-extern unsigned long omap3_sram_configure_core_dpll_sz;
-
-#ifdef CONFIG_PM
-extern void omap_push_sram_idle(void);
-#else
-static inline void omap_push_sram_idle(void) {}
-#endif /* CONFIG_PM */
-
-#endif /* __ASSEMBLY__ */
-
-/*
- * OMAP2+: define the SRAM PA addresses.
- * Used by the SRAM management code and the idle sleep code.
- */
-#define OMAP2_SRAM_PA 0x40200000
-#define OMAP3_SRAM_PA 0x40200000
-#ifdef CONFIG_OMAP4_ERRATA_I688
-#define OMAP4_SRAM_PA 0x40304000
-#define OMAP4_SRAM_VA 0xfe404000
-#else
-#define OMAP4_SRAM_PA 0x40300000
-#endif
-#define AM33XX_SRAM_PA 0x40300000
-#endif
diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h
deleted file mode 100644
index 7f7b112..0000000
--- a/arch/arm/plat-omap/include/plat/uncompress.h
+++ /dev/null
@@ -1,204 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/uncompress.h
- *
- * Serial port stubs for kernel decompress status messages
- *
- * Initially based on:
- * linux-2.4.15-rmk1-dsplinux1.6/arch/arm/plat-omap/include/mach1510/uncompress.h
- * Copyright (C) 2000 RidgeRun, Inc.
- * Author: Greg Lonnon <glonnon@ridgerun.com>
- *
- * Rewritten by:
- * Author: <source@mvista.com>
- * 2004 (c) MontaVista Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <linux/types.h>
-#include <linux/serial_reg.h>
-
-#include <asm/memory.h>
-#include <asm/mach-types.h>
-
-#include <plat/serial.h>
-
-#define MDR1_MODE_MASK 0x07
-
-volatile u8 *uart_base;
-int uart_shift;
-
-/*
- * Store the DEBUG_LL uart number into memory.
- * See also debug-macro.S, and serial.c for related code.
- */
-static void set_omap_uart_info(unsigned char port)
-{
- /*
- * Get address of some.bss variable and round it down
- * a la CONFIG_AUTO_ZRELADDR.
- */
- u32 ram_start = (u32)&uart_shift & 0xf8000000;
- u32 *uart_info = (u32 *)(ram_start + OMAP_UART_INFO_OFS);
- *uart_info = port;
-}
-
-static void putc(int c)
-{
- if (!uart_base)
- return;
-
- /* Check for UART 16x mode */
- if ((uart_base[UART_OMAP_MDR1 << uart_shift] & MDR1_MODE_MASK) != 0)
- return;
-
- while (!(uart_base[UART_LSR << uart_shift] & UART_LSR_THRE))
- barrier();
- uart_base[UART_TX << uart_shift] = c;
-}
-
-static inline void flush(void)
-{
-}
-
-/*
- * Macros to configure UART1 and debug UART
- */
-#define _DEBUG_LL_ENTRY(mach, dbg_uart, dbg_shft, dbg_id) \
- if (machine_is_##mach()) { \
- uart_base = (volatile u8 *)(dbg_uart); \
- uart_shift = (dbg_shft); \
- port = (dbg_id); \
- set_omap_uart_info(port); \
- break; \
- }
-
-#define DEBUG_LL_OMAP7XX(p, mach) \
- _DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP7XX_PORT_SHIFT, \
- OMAP1UART##p)
-
-#define DEBUG_LL_OMAP1(p, mach) \
- _DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP_PORT_SHIFT, \
- OMAP1UART##p)
-
-#define DEBUG_LL_OMAP2(p, mach) \
- _DEBUG_LL_ENTRY(mach, OMAP2_UART##p##_BASE, OMAP_PORT_SHIFT, \
- OMAP2UART##p)
-
-#define DEBUG_LL_OMAP3(p, mach) \
- _DEBUG_LL_ENTRY(mach, OMAP3_UART##p##_BASE, OMAP_PORT_SHIFT, \
- OMAP3UART##p)
-
-#define DEBUG_LL_OMAP4(p, mach) \
- _DEBUG_LL_ENTRY(mach, OMAP4_UART##p##_BASE, OMAP_PORT_SHIFT, \
- OMAP4UART##p)
-
-#define DEBUG_LL_OMAP5(p, mach) \
- _DEBUG_LL_ENTRY(mach, OMAP5_UART##p##_BASE, OMAP_PORT_SHIFT, \
- OMAP5UART##p)
-/* Zoom2/3 shift is different for UART1 and external port */
-#define DEBUG_LL_ZOOM(mach) \
- _DEBUG_LL_ENTRY(mach, ZOOM_UART_BASE, ZOOM_PORT_SHIFT, ZOOM_UART)
-
-#define DEBUG_LL_TI81XX(p, mach) \
- _DEBUG_LL_ENTRY(mach, TI81XX_UART##p##_BASE, OMAP_PORT_SHIFT, \
- TI81XXUART##p)
-
-#define DEBUG_LL_AM33XX(p, mach) \
- _DEBUG_LL_ENTRY(mach, AM33XX_UART##p##_BASE, OMAP_PORT_SHIFT, \
- AM33XXUART##p)
-
-static inline void arch_decomp_setup(void)
-{
- int port = 0;
-
- /*
- * Initialize the port based on the machine ID from the bootloader.
- * Note that we're using macros here instead of switch statement
- * as machine_is functions are optimized out for the boards that
- * are not selected.
- */
- do {
- /* omap7xx/8xx based boards using UART1 with shift 0 */
- DEBUG_LL_OMAP7XX(1, herald);
- DEBUG_LL_OMAP7XX(1, omap_perseus2);
-
- /* omap15xx/16xx based boards using UART1 */
- DEBUG_LL_OMAP1(1, ams_delta);
- DEBUG_LL_OMAP1(1, nokia770);
- DEBUG_LL_OMAP1(1, omap_h2);
- DEBUG_LL_OMAP1(1, omap_h3);
- DEBUG_LL_OMAP1(1, omap_innovator);
- DEBUG_LL_OMAP1(1, omap_osk);
- DEBUG_LL_OMAP1(1, omap_palmte);
- DEBUG_LL_OMAP1(1, omap_palmz71);
-
- /* omap15xx/16xx based boards using UART2 */
- DEBUG_LL_OMAP1(2, omap_palmtt);
-
- /* omap15xx/16xx based boards using UART3 */
- DEBUG_LL_OMAP1(3, sx1);
-
- /* omap2 based boards using UART1 */
- DEBUG_LL_OMAP2(1, omap_2430sdp);
- DEBUG_LL_OMAP2(1, omap_apollon);
- DEBUG_LL_OMAP2(1, omap_h4);
-
- /* omap2 based boards using UART3 */
- DEBUG_LL_OMAP2(3, nokia_n800);
- DEBUG_LL_OMAP2(3, nokia_n810);
- DEBUG_LL_OMAP2(3, nokia_n810_wimax);
-
- /* omap3 based boards using UART1 */
- DEBUG_LL_OMAP2(1, omap3evm);
- DEBUG_LL_OMAP3(1, omap_3430sdp);
- DEBUG_LL_OMAP3(1, omap_3630sdp);
- DEBUG_LL_OMAP3(1, omap3530_lv_som);
- DEBUG_LL_OMAP3(1, omap3_torpedo);
-
- /* omap3 based boards using UART3 */
- DEBUG_LL_OMAP3(3, cm_t35);
- DEBUG_LL_OMAP3(3, cm_t3517);
- DEBUG_LL_OMAP3(3, cm_t3730);
- DEBUG_LL_OMAP3(3, craneboard);
- DEBUG_LL_OMAP3(3, devkit8000);
- DEBUG_LL_OMAP3(3, igep0020);
- DEBUG_LL_OMAP3(3, igep0030);
- DEBUG_LL_OMAP3(3, nokia_rm680);
- DEBUG_LL_OMAP3(3, nokia_rm696);
- DEBUG_LL_OMAP3(3, nokia_rx51);
- DEBUG_LL_OMAP3(3, omap3517evm);
- DEBUG_LL_OMAP3(3, omap3_beagle);
- DEBUG_LL_OMAP3(3, omap3_pandora);
- DEBUG_LL_OMAP3(3, omap_ldp);
- DEBUG_LL_OMAP3(3, overo);
- DEBUG_LL_OMAP3(3, touchbook);
-
- /* omap4 based boards using UART3 */
- DEBUG_LL_OMAP4(3, omap_4430sdp);
- DEBUG_LL_OMAP4(3, omap4_panda);
-
- /* omap5 based boards using UART3 */
- DEBUG_LL_OMAP5(3, omap5_sevm);
-
- /* zoom2/3 external uart */
- DEBUG_LL_ZOOM(omap_zoom2);
- DEBUG_LL_ZOOM(omap_zoom3);
-
- /* TI8168 base boards using UART3 */
- DEBUG_LL_TI81XX(3, ti8168evm);
-
- /* TI8148 base boards using UART1 */
- DEBUG_LL_TI81XX(1, ti8148evm);
-
- /* AM33XX base boards using UART1 */
- DEBUG_LL_AM33XX(1, am335xevm);
- } while (0);
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_wdog()
diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h
deleted file mode 100644
index 87ee140..0000000
--- a/arch/arm/plat-omap/include/plat/usb.h
+++ /dev/null
@@ -1,179 +0,0 @@
-// include/asm-arm/mach-omap/usb.h
-
-#ifndef __ASM_ARCH_OMAP_USB_H
-#define __ASM_ARCH_OMAP_USB_H
-
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/usb/musb.h>
-
-#define OMAP3_HS_USB_PORTS 3
-
-enum usbhs_omap_port_mode {
- OMAP_USBHS_PORT_MODE_UNUSED,
- OMAP_EHCI_PORT_MODE_PHY,
- OMAP_EHCI_PORT_MODE_TLL,
- OMAP_EHCI_PORT_MODE_HSIC,
- OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0,
- OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM,
- OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0,
- OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM,
- OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0,
- OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM,
- OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0,
- OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM,
- OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0,
- OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM
-};
-
-struct usbhs_omap_board_data {
- enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS];
-
- /* have to be valid if phy_reset is true and portx is in phy mode */
- int reset_gpio_port[OMAP3_HS_USB_PORTS];
-
- /* Set this to true for ES2.x silicon */
- unsigned es2_compatibility:1;
-
- unsigned phy_reset:1;
-
- /*
- * Regulators for USB PHYs.
- * Each PHY can have a separate regulator.
- */
- struct regulator *regulator[OMAP3_HS_USB_PORTS];
-};
-
-#ifdef CONFIG_ARCH_OMAP2PLUS
-
-struct ehci_hcd_omap_platform_data {
- enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS];
- int reset_gpio_port[OMAP3_HS_USB_PORTS];
- struct regulator *regulator[OMAP3_HS_USB_PORTS];
- unsigned phy_reset:1;
-};
-
-struct ohci_hcd_omap_platform_data {
- enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS];
- unsigned es2_compatibility:1;
-};
-
-struct usbhs_omap_platform_data {
- enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS];
-
- struct ehci_hcd_omap_platform_data *ehci_data;
- struct ohci_hcd_omap_platform_data *ohci_data;
-};
-
-struct usbtll_omap_platform_data {
- enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS];
-};
-/*-------------------------------------------------------------------------*/
-
-struct omap_musb_board_data {
- u8 interface_type;
- u8 mode;
- u16 power;
- unsigned extvbus:1;
- void (*set_phy_power)(u8 on);
- void (*clear_irq)(void);
- void (*set_mode)(u8 mode);
- void (*reset)(void);
-};
-
-enum musb_interface {MUSB_INTERFACE_ULPI, MUSB_INTERFACE_UTMI};
-
-extern void usb_musb_init(struct omap_musb_board_data *board_data);
-
-extern void usbhs_init(const struct usbhs_omap_board_data *pdata);
-extern int omap_tll_enable(void);
-extern int omap_tll_disable(void);
-
-extern int omap4430_phy_power(struct device *dev, int ID, int on);
-extern int omap4430_phy_set_clk(struct device *dev, int on);
-extern int omap4430_phy_init(struct device *dev);
-extern int omap4430_phy_exit(struct device *dev);
-extern int omap4430_phy_suspend(struct device *dev, int suspend);
-
-#endif
-
-extern void am35x_musb_reset(void);
-extern void am35x_musb_phy_power(u8 on);
-extern void am35x_musb_clear_irq(void);
-extern void am35x_set_mode(u8 musb_mode);
-extern void ti81xx_musb_phy_power(u8 on);
-
-/* AM35x */
-/* USB 2.0 PHY Control */
-#define CONF2_PHY_GPIOMODE (1 << 23)
-#define CONF2_OTGMODE (3 << 14)
-#define CONF2_NO_OVERRIDE (0 << 14)
-#define CONF2_FORCE_HOST (1 << 14)
-#define CONF2_FORCE_DEVICE (2 << 14)
-#define CONF2_FORCE_HOST_VBUS_LOW (3 << 14)
-#define CONF2_SESENDEN (1 << 13)
-#define CONF2_VBDTCTEN (1 << 12)
-#define CONF2_REFFREQ_24MHZ (2 << 8)
-#define CONF2_REFFREQ_26MHZ (7 << 8)
-#define CONF2_REFFREQ_13MHZ (6 << 8)
-#define CONF2_REFFREQ (0xf << 8)
-#define CONF2_PHYCLKGD (1 << 7)
-#define CONF2_VBUSSENSE (1 << 6)
-#define CONF2_PHY_PLLON (1 << 5)
-#define CONF2_RESET (1 << 4)
-#define CONF2_PHYPWRDN (1 << 3)
-#define CONF2_OTGPWRDN (1 << 2)
-#define CONF2_DATPOL (1 << 1)
-
-/* TI81XX specific definitions */
-#define USBCTRL0 0x620
-#define USBSTAT0 0x624
-
-/* TI816X PHY controls bits */
-#define TI816X_USBPHY0_NORMAL_MODE (1 << 0)
-#define TI816X_USBPHY_REFCLK_OSC (1 << 8)
-
-/* TI814X PHY controls bits */
-#define USBPHY_CM_PWRDN (1 << 0)
-#define USBPHY_OTG_PWRDN (1 << 1)
-#define USBPHY_CHGDET_DIS (1 << 2)
-#define USBPHY_CHGDET_RSTRT (1 << 3)
-#define USBPHY_SRCONDM (1 << 4)
-#define USBPHY_SINKONDP (1 << 5)
-#define USBPHY_CHGISINK_EN (1 << 6)
-#define USBPHY_CHGVSRC_EN (1 << 7)
-#define USBPHY_DMPULLUP (1 << 8)
-#define USBPHY_DPPULLUP (1 << 9)
-#define USBPHY_CDET_EXTCTL (1 << 10)
-#define USBPHY_GPIO_MODE (1 << 12)
-#define USBPHY_DPOPBUFCTL (1 << 13)
-#define USBPHY_DMOPBUFCTL (1 << 14)
-#define USBPHY_DPINPUT (1 << 15)
-#define USBPHY_DMINPUT (1 << 16)
-#define USBPHY_DPGPIO_PD (1 << 17)
-#define USBPHY_DMGPIO_PD (1 << 18)
-#define USBPHY_OTGVDET_EN (1 << 19)
-#define USBPHY_OTGSESSEND_EN (1 << 20)
-#define USBPHY_DATA_POLARITY (1 << 23)
-
-#if defined(CONFIG_ARCH_OMAP1) && defined(CONFIG_USB)
-u32 omap1_usb0_init(unsigned nwires, unsigned is_device);
-u32 omap1_usb1_init(unsigned nwires);
-u32 omap1_usb2_init(unsigned nwires, unsigned alt_pingroup);
-#else
-static inline u32 omap1_usb0_init(unsigned nwires, unsigned is_device)
-{
- return 0;
-}
-static inline u32 omap1_usb1_init(unsigned nwires)
-{
- return 0;
-
-}
-static inline u32 omap1_usb2_init(unsigned nwires, unsigned alt_pingroup)
-{
- return 0;
-}
-#endif
-
-#endif /* __ASM_ARCH_OMAP_USB_H */
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 28acb38..743fc28 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -20,198 +20,20 @@
#include <linux/init.h>
#include <linux/io.h>
+#include <asm/fncpy.h>
#include <asm/tlb.h>
#include <asm/cacheflush.h>
#include <asm/mach/map.h>
-#include <plat/sram.h>
-#include <plat/cpu.h>
-
-#include "sram.h"
-
-/* XXX These "sideways" includes will disappear when sram.c becomes a driver */
-#include "../mach-omap2/iomap.h"
-#include "../mach-omap2/prm2xxx_3xxx.h"
-#include "../mach-omap2/sdrc.h"
-
-#define OMAP1_SRAM_PA 0x20000000
-#define OMAP2_SRAM_PUB_PA (OMAP2_SRAM_PA + 0xf800)
-#define OMAP3_SRAM_PUB_PA (OMAP3_SRAM_PA + 0x8000)
-#ifdef CONFIG_OMAP4_ERRATA_I688
-#define OMAP4_SRAM_PUB_PA OMAP4_SRAM_PA
-#else
-#define OMAP4_SRAM_PUB_PA (OMAP4_SRAM_PA + 0x4000)
-#endif
-#define OMAP5_SRAM_PA 0x40300000
-
-#if defined(CONFIG_ARCH_OMAP2PLUS)
-#define SRAM_BOOTLOADER_SZ 0x00
-#else
-#define SRAM_BOOTLOADER_SZ 0x80
-#endif
-
-#define OMAP24XX_VA_REQINFOPERM0 OMAP2_L3_IO_ADDRESS(0x68005048)
-#define OMAP24XX_VA_READPERM0 OMAP2_L3_IO_ADDRESS(0x68005050)
-#define OMAP24XX_VA_WRITEPERM0 OMAP2_L3_IO_ADDRESS(0x68005058)
-
-#define OMAP34XX_VA_REQINFOPERM0 OMAP2_L3_IO_ADDRESS(0x68012848)
-#define OMAP34XX_VA_READPERM0 OMAP2_L3_IO_ADDRESS(0x68012850)
-#define OMAP34XX_VA_WRITEPERM0 OMAP2_L3_IO_ADDRESS(0x68012858)
-#define OMAP34XX_VA_ADDR_MATCH2 OMAP2_L3_IO_ADDRESS(0x68012880)
-#define OMAP34XX_VA_SMS_RG_ATT0 OMAP2_L3_IO_ADDRESS(0x6C000048)
-
-#define GP_DEVICE 0x300
-
#define ROUND_DOWN(value,boundary) ((value) & (~((boundary)-1)))
-static unsigned long omap_sram_start;
static void __iomem *omap_sram_base;
static unsigned long omap_sram_skip;
static unsigned long omap_sram_size;
static void __iomem *omap_sram_ceil;
/*
- * Depending on the target RAMFS firewall setup, the public usable amount of
- * SRAM varies. The default accessible size for all device types is 2k. A GP
- * device allows ARM11 but not other initiators for full size. This
- * functionality seems ok until some nice security API happens.
- */
-static int is_sram_locked(void)
-{
- if (OMAP2_DEVICE_TYPE_GP == omap_type()) {
- /* RAMFW: R/W access to all initiators for all qualifier sets */
- if (cpu_is_omap242x()) {
- __raw_writel(0xFF, OMAP24XX_VA_REQINFOPERM0); /* all q-vects */
- __raw_writel(0xCFDE, OMAP24XX_VA_READPERM0); /* all i-read */
- __raw_writel(0xCFDE, OMAP24XX_VA_WRITEPERM0); /* all i-write */
- }
- if (cpu_is_omap34xx()) {
- __raw_writel(0xFFFF, OMAP34XX_VA_REQINFOPERM0); /* all q-vects */
- __raw_writel(0xFFFF, OMAP34XX_VA_READPERM0); /* all i-read */
- __raw_writel(0xFFFF, OMAP34XX_VA_WRITEPERM0); /* all i-write */
- __raw_writel(0x0, OMAP34XX_VA_ADDR_MATCH2);
- __raw_writel(0xFFFFFFFF, OMAP34XX_VA_SMS_RG_ATT0);
- }
- return 0;
- } else
- return 1; /* assume locked with no PPA or security driver */
-}
-
-/*
- * The amount of SRAM depends on the core type.
- * Note that we cannot try to test for SRAM here because writes
- * to secure SRAM will hang the system. Also the SRAM is not
- * yet mapped at this point.
- */
-static void __init omap_detect_sram(void)
-{
- omap_sram_skip = SRAM_BOOTLOADER_SZ;
- if (cpu_class_is_omap2()) {
- if (is_sram_locked()) {
- if (cpu_is_omap34xx()) {
- omap_sram_start = OMAP3_SRAM_PUB_PA;
- if ((omap_type() == OMAP2_DEVICE_TYPE_EMU) ||
- (omap_type() == OMAP2_DEVICE_TYPE_SEC)) {
- omap_sram_size = 0x7000; /* 28K */
- omap_sram_skip += SZ_16K;
- } else {
- omap_sram_size = 0x8000; /* 32K */
- }
- } else if (cpu_is_omap44xx()) {
- omap_sram_start = OMAP4_SRAM_PUB_PA;
- omap_sram_size = 0xa000; /* 40K */
- } else if (soc_is_omap54xx()) {
- omap_sram_start = OMAP5_SRAM_PA;
- omap_sram_size = SZ_128K; /* 128KB */
- } else {
- omap_sram_start = OMAP2_SRAM_PUB_PA;
- omap_sram_size = 0x800; /* 2K */
- }
- } else {
- if (soc_is_am33xx()) {
- omap_sram_start = AM33XX_SRAM_PA;
- omap_sram_size = 0x10000; /* 64K */
- } else if (cpu_is_omap34xx()) {
- omap_sram_start = OMAP3_SRAM_PA;
- omap_sram_size = 0x10000; /* 64K */
- } else if (cpu_is_omap44xx()) {
- omap_sram_start = OMAP4_SRAM_PA;
- omap_sram_size = 0xe000; /* 56K */
- } else if (soc_is_omap54xx()) {
- omap_sram_start = OMAP5_SRAM_PA;
- omap_sram_size = SZ_128K; /* 128KB */
- } else {
- omap_sram_start = OMAP2_SRAM_PA;
- if (cpu_is_omap242x())
- omap_sram_size = 0xa0000; /* 640K */
- else if (cpu_is_omap243x())
- omap_sram_size = 0x10000; /* 64K */
- }
- }
- } else {
- omap_sram_start = OMAP1_SRAM_PA;
-
- if (cpu_is_omap7xx())
- omap_sram_size = 0x32000; /* 200K */
- else if (cpu_is_omap15xx())
- omap_sram_size = 0x30000; /* 192K */
- else if (cpu_is_omap1610() || cpu_is_omap1611() ||
- cpu_is_omap1621() || cpu_is_omap1710())
- omap_sram_size = 0x4000; /* 16K */
- else {
- pr_err("Could not detect SRAM size\n");
- omap_sram_size = 0x4000;
- }
- }
-}
-
-/*
- * Note that we cannot use ioremap for SRAM, as clock init needs SRAM early.
- */
-static void __init omap_map_sram(void)
-{
- int cached = 1;
-
- if (omap_sram_size == 0)
- return;
-
-#ifdef CONFIG_OMAP4_ERRATA_I688
- if (cpu_is_omap44xx()) {
- omap_sram_start += PAGE_SIZE;
- omap_sram_size -= SZ_16K;
- }
-#endif
- if (cpu_is_omap34xx()) {
- /*
- * SRAM must be marked as non-cached on OMAP3 since the
- * CORE DPLL M2 divider change code (in SRAM) runs with the
- * SDRAM controller disabled, and if it is marked cached,
- * the ARM may attempt to write cache lines back to SDRAM
- * which will cause the system to hang.
- */
- cached = 0;
- }
-
- omap_sram_start = ROUND_DOWN(omap_sram_start, PAGE_SIZE);
- omap_sram_base = __arm_ioremap_exec(omap_sram_start, omap_sram_size,
- cached);
- if (!omap_sram_base) {
- pr_err("SRAM: Could not map\n");
- return;
- }
-
- omap_sram_ceil = omap_sram_base + omap_sram_size;
-
- /*
- * Looks like we need to preserve some bootloader code at the
- * beginning of SRAM for jumping to flash for reboot to work...
- */
- memset_io(omap_sram_base + omap_sram_skip, 0,
- omap_sram_size - omap_sram_skip);
-}
-
-/*
* Memory allocator for SRAM: calculates the new ceiling address
* for pushing a function using the fncpy API.
*
@@ -236,171 +58,39 @@
return (void *)omap_sram_ceil;
}
-#ifdef CONFIG_ARCH_OMAP1
-
-static void (*_omap_sram_reprogram_clock)(u32 dpllctl, u32 ckctl);
-
-void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl)
-{
- BUG_ON(!_omap_sram_reprogram_clock);
- /* On 730, bit 13 must always be 1 */
- if (cpu_is_omap7xx())
- ckctl |= 0x2000;
- _omap_sram_reprogram_clock(dpllctl, ckctl);
-}
-
-static int __init omap1_sram_init(void)
-{
- _omap_sram_reprogram_clock =
- omap_sram_push(omap1_sram_reprogram_clock,
- omap1_sram_reprogram_clock_sz);
-
- return 0;
-}
-
-#else
-#define omap1_sram_init() do {} while (0)
-#endif
-
-#if defined(CONFIG_ARCH_OMAP2)
-
-static void (*_omap2_sram_ddr_init)(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
- u32 base_cs, u32 force_unlock);
-
-void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
- u32 base_cs, u32 force_unlock)
-{
- BUG_ON(!_omap2_sram_ddr_init);
- _omap2_sram_ddr_init(slow_dll_ctrl, fast_dll_ctrl,
- base_cs, force_unlock);
-}
-
-static void (*_omap2_sram_reprogram_sdrc)(u32 perf_level, u32 dll_val,
- u32 mem_type);
-
-void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type)
-{
- BUG_ON(!_omap2_sram_reprogram_sdrc);
- _omap2_sram_reprogram_sdrc(perf_level, dll_val, mem_type);
-}
-
-static u32 (*_omap2_set_prcm)(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
-
-u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass)
-{
- BUG_ON(!_omap2_set_prcm);
- return _omap2_set_prcm(dpll_ctrl_val, sdrc_rfr_val, bypass);
-}
-#endif
-
-#ifdef CONFIG_SOC_OMAP2420
-static int __init omap242x_sram_init(void)
-{
- _omap2_sram_ddr_init = omap_sram_push(omap242x_sram_ddr_init,
- omap242x_sram_ddr_init_sz);
-
- _omap2_sram_reprogram_sdrc = omap_sram_push(omap242x_sram_reprogram_sdrc,
- omap242x_sram_reprogram_sdrc_sz);
-
- _omap2_set_prcm = omap_sram_push(omap242x_sram_set_prcm,
- omap242x_sram_set_prcm_sz);
-
- return 0;
-}
-#else
-static inline int omap242x_sram_init(void)
-{
- return 0;
-}
-#endif
-
-#ifdef CONFIG_SOC_OMAP2430
-static int __init omap243x_sram_init(void)
-{
- _omap2_sram_ddr_init = omap_sram_push(omap243x_sram_ddr_init,
- omap243x_sram_ddr_init_sz);
-
- _omap2_sram_reprogram_sdrc = omap_sram_push(omap243x_sram_reprogram_sdrc,
- omap243x_sram_reprogram_sdrc_sz);
-
- _omap2_set_prcm = omap_sram_push(omap243x_sram_set_prcm,
- omap243x_sram_set_prcm_sz);
-
- return 0;
-}
-#else
-static inline int omap243x_sram_init(void)
-{
- return 0;
-}
-#endif
-
-#ifdef CONFIG_ARCH_OMAP3
-
-static u32 (*_omap3_sram_configure_core_dpll)(
- u32 m2, u32 unlock_dll, u32 f, u32 inc,
- u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
- u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
- u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
- u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
-
-u32 omap3_configure_core_dpll(u32 m2, u32 unlock_dll, u32 f, u32 inc,
- u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
- u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
- u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
- u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1)
-{
- BUG_ON(!_omap3_sram_configure_core_dpll);
- return _omap3_sram_configure_core_dpll(
- m2, unlock_dll, f, inc,
- sdrc_rfr_ctrl_0, sdrc_actim_ctrl_a_0,
- sdrc_actim_ctrl_b_0, sdrc_mr_0,
- sdrc_rfr_ctrl_1, sdrc_actim_ctrl_a_1,
- sdrc_actim_ctrl_b_1, sdrc_mr_1);
-}
-
-void omap3_sram_restore_context(void)
+/*
+ * The SRAM context is lost during off-idle and stack
+ * needs to be reset.
+ */
+void omap_sram_reset(void)
{
omap_sram_ceil = omap_sram_base + omap_sram_size;
-
- _omap3_sram_configure_core_dpll =
- omap_sram_push(omap3_sram_configure_core_dpll,
- omap3_sram_configure_core_dpll_sz);
- omap_push_sram_idle();
}
-static inline int omap34xx_sram_init(void)
+/*
+ * Note that we cannot use ioremap for SRAM, as clock init needs SRAM early.
+ */
+void __init omap_map_sram(unsigned long start, unsigned long size,
+ unsigned long skip, int cached)
{
- omap3_sram_restore_context();
- return 0;
-}
-#else
-static inline int omap34xx_sram_init(void)
-{
- return 0;
-}
-#endif /* CONFIG_ARCH_OMAP3 */
+ if (size == 0)
+ return;
-static inline int am33xx_sram_init(void)
-{
- return 0;
-}
+ start = ROUND_DOWN(start, PAGE_SIZE);
+ omap_sram_size = size;
+ omap_sram_skip = skip;
+ omap_sram_base = __arm_ioremap_exec(start, size, cached);
+ if (!omap_sram_base) {
+ pr_err("SRAM: Could not map\n");
+ return;
+ }
-int __init omap_sram_init(void)
-{
- omap_detect_sram();
- omap_map_sram();
+ omap_sram_reset();
- if (!(cpu_class_is_omap2()))
- omap1_sram_init();
- else if (cpu_is_omap242x())
- omap242x_sram_init();
- else if (cpu_is_omap2430())
- omap243x_sram_init();
- else if (soc_is_am33xx())
- am33xx_sram_init();
- else if (cpu_is_omap34xx())
- omap34xx_sram_init();
-
- return 0;
+ /*
+ * Looks like we need to preserve some bootloader code at the
+ * beginning of SRAM for jumping to flash for reboot to work...
+ */
+ memset_io(omap_sram_base + omap_sram_skip, 0,
+ omap_sram_size - omap_sram_skip);
}
diff --git a/arch/arm/plat-omap/sram.h b/arch/arm/plat-omap/sram.h
deleted file mode 100644
index 29b43ef..0000000
--- a/arch/arm/plat-omap/sram.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __PLAT_OMAP_SRAM_H__
-#define __PLAT_OMAP_SRAM_H__
-
-extern int __init omap_sram_init(void);
-
-#endif /* __PLAT_OMAP_SRAM_H__ */
diff --git a/arch/arm/plat-pxa/Makefile b/arch/arm/plat-pxa/Makefile
index af8e484..1fc9419 100644
--- a/arch/arm/plat-pxa/Makefile
+++ b/arch/arm/plat-pxa/Makefile
@@ -5,7 +5,6 @@
obj-y := dma.o
obj-$(CONFIG_PXA3xx) += mfp.o
-obj-$(CONFIG_PXA95x) += mfp.o
obj-$(CONFIG_ARCH_MMP) += mfp.o
obj-$(CONFIG_PXA_SSP) += ssp.o
diff --git a/arch/arm/plat-pxa/include/plat/mfp.h b/arch/arm/plat-pxa/include/plat/mfp.h
index 5c79c29..10bc4f3 100644
--- a/arch/arm/plat-pxa/include/plat/mfp.h
+++ b/arch/arm/plat-pxa/include/plat/mfp.h
@@ -423,7 +423,7 @@
((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK | MFP_LPM_STATE_MASK)) |\
(MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv | MFP_LPM_##lpm))
-#if defined(CONFIG_PXA3xx) || defined(CONFIG_PXA95x) || defined(CONFIG_ARCH_MMP)
+#if defined(CONFIG_PXA3xx) || defined(CONFIG_ARCH_MMP)
/*
* each MFP pin will have a MFPR register, since the offset of the
* register varies between processors, the processor specific code
@@ -470,6 +470,6 @@
void mfp_config(unsigned long *mfp_cfgs, int num);
void mfp_config_run(void);
void mfp_config_lpm(void);
-#endif /* CONFIG_PXA3xx || CONFIG_PXA95x || CONFIG_ARCH_MMP */
+#endif /* CONFIG_PXA3xx || CONFIG_ARCH_MMP */
#endif /* __ASM_PLAT_MFP_H */
diff --git a/arch/arm/plat-samsung/adc.c b/arch/arm/plat-samsung/adc.c
index b1e05cc..37542c2 100644
--- a/arch/arm/plat-samsung/adc.c
+++ b/arch/arm/plat-samsung/adc.c
@@ -344,7 +344,7 @@
int ret;
unsigned tmp;
- adc = kzalloc(sizeof(struct adc_device), GFP_KERNEL);
+ adc = devm_kzalloc(dev, sizeof(struct adc_device), GFP_KERNEL);
if (adc == NULL) {
dev_err(dev, "failed to allocate adc_device\n");
return -ENOMEM;
@@ -355,50 +355,46 @@
adc->pdev = pdev;
adc->prescale = S3C2410_ADCCON_PRSCVL(49);
- adc->vdd = regulator_get(dev, "vdd");
+ adc->vdd = devm_regulator_get(dev, "vdd");
if (IS_ERR(adc->vdd)) {
dev_err(dev, "operating without regulator \"vdd\" .\n");
- ret = PTR_ERR(adc->vdd);
- goto err_alloc;
+ return PTR_ERR(adc->vdd);
}
adc->irq = platform_get_irq(pdev, 1);
if (adc->irq <= 0) {
dev_err(dev, "failed to get adc irq\n");
- ret = -ENOENT;
- goto err_reg;
+ return -ENOENT;
}
- ret = request_irq(adc->irq, s3c_adc_irq, 0, dev_name(dev), adc);
+ ret = devm_request_irq(dev, adc->irq, s3c_adc_irq, 0, dev_name(dev),
+ adc);
if (ret < 0) {
dev_err(dev, "failed to attach adc irq\n");
- goto err_reg;
+ return ret;
}
- adc->clk = clk_get(dev, "adc");
+ adc->clk = devm_clk_get(dev, "adc");
if (IS_ERR(adc->clk)) {
dev_err(dev, "failed to get adc clock\n");
- ret = PTR_ERR(adc->clk);
- goto err_irq;
+ return PTR_ERR(adc->clk);
}
regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!regs) {
dev_err(dev, "failed to find registers\n");
- ret = -ENXIO;
- goto err_clk;
+ return -ENXIO;
}
- adc->regs = ioremap(regs->start, resource_size(regs));
+ adc->regs = devm_request_and_ioremap(dev, regs);
if (!adc->regs) {
dev_err(dev, "failed to map registers\n");
- ret = -ENXIO;
- goto err_clk;
+ return -ENXIO;
}
ret = regulator_enable(adc->vdd);
if (ret)
- goto err_ioremap;
+ return ret;
clk_enable(adc->clk);
@@ -418,32 +414,14 @@
adc_dev = adc;
return 0;
-
- err_ioremap:
- iounmap(adc->regs);
- err_clk:
- clk_put(adc->clk);
-
- err_irq:
- free_irq(adc->irq, adc);
- err_reg:
- regulator_put(adc->vdd);
- err_alloc:
- kfree(adc);
- return ret;
}
static int __devexit s3c_adc_remove(struct platform_device *pdev)
{
struct adc_device *adc = platform_get_drvdata(pdev);
- iounmap(adc->regs);
- free_irq(adc->irq, adc);
clk_disable(adc->clk);
regulator_disable(adc->vdd);
- regulator_put(adc->vdd);
- clk_put(adc->clk);
- kfree(adc);
return 0;
}
diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c
index 03f654d..a17d7b3 100644
--- a/arch/arm/plat-samsung/devs.c
+++ b/arch/arm/plat-samsung/devs.c
@@ -486,11 +486,7 @@
struct platform_device s3c_device_i2c0 = {
.name = "s3c2410-i2c",
-#ifdef CONFIG_S3C_DEV_I2C1
.id = 0,
-#else
- .id = -1,
-#endif
.num_resources = ARRAY_SIZE(s3c_i2c0_resource),
.resource = s3c_i2c0_resource,
};
diff --git a/arch/arm/plat-samsung/include/plat/spi-core.h b/arch/arm/plat-samsung/include/plat/spi-core.h
new file mode 100644
index 0000000..0b9428a
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/spi-core.h
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2012 Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __PLAT_S3C_SPI_CORE_H
+#define __PLAT_S3C_SPI_CORE_H
+
+/* These functions are only for use with the core support code, such as
+ * the cpu specific initialisation code
+ */
+
+/* re-define device name depending on support. */
+static inline void s3c64xx_spi_setname(char *name)
+{
+#ifdef CONFIG_S3C64XX_DEV_SPI0
+ s3c64xx_device_spi0.name = name;
+#endif
+#ifdef CONFIG_S3C64XX_DEV_SPI1
+ s3c64xx_device_spi1.name = name;
+#endif
+#ifdef CONFIG_S3C64XX_DEV_SPI2
+ s3c64xx_device_spi2.name = name;
+#endif
+}
+
+#endif /* __PLAT_S3C_SPI_CORE_H */
diff --git a/arch/arm/tools/Makefile b/arch/arm/tools/Makefile
index 635cb186..32d05c8 100644
--- a/arch/arm/tools/Makefile
+++ b/arch/arm/tools/Makefile
@@ -5,6 +5,6 @@
#
include/generated/mach-types.h: $(src)/gen-mach-types $(src)/mach-types
- @echo ' Generating $@'
+ @$(kecho) ' Generating $@'
@mkdir -p $(dir $@)
$(Q)$(AWK) -f $^ > $@ || { rm -f $@; /bin/false; }
diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c
index c834b32..3b44e0d 100644
--- a/arch/arm/vfp/vfpmodule.c
+++ b/arch/arm/vfp/vfpmodule.c
@@ -701,11 +701,14 @@
elf_hwcap |= HWCAP_VFPv3;
/*
- * Check for VFPv3 D16. CPUs in this configuration
- * only have 16 x 64bit registers.
+ * Check for VFPv3 D16 and VFPv4 D16. CPUs in
+ * this configuration only have 16 x 64bit
+ * registers.
*/
if (((fmrx(MVFR0) & MVFR0_A_SIMD_MASK)) == 1)
- elf_hwcap |= HWCAP_VFPv3D16;
+ elf_hwcap |= HWCAP_VFPv3D16; /* also v4-D16 */
+ else
+ elf_hwcap |= HWCAP_VFPD32;
}
#endif
/*
diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c
index 59bcb96..f576092 100644
--- a/arch/arm/xen/enlighten.c
+++ b/arch/arm/xen/enlighten.c
@@ -166,3 +166,14 @@
*pages = NULL;
}
EXPORT_SYMBOL_GPL(free_xenballooned_pages);
+
+/* In the hypervisor.S file. */
+EXPORT_SYMBOL_GPL(HYPERVISOR_event_channel_op);
+EXPORT_SYMBOL_GPL(HYPERVISOR_grant_table_op);
+EXPORT_SYMBOL_GPL(HYPERVISOR_xen_version);
+EXPORT_SYMBOL_GPL(HYPERVISOR_console_io);
+EXPORT_SYMBOL_GPL(HYPERVISOR_sched_op);
+EXPORT_SYMBOL_GPL(HYPERVISOR_hvm_op);
+EXPORT_SYMBOL_GPL(HYPERVISOR_memory_op);
+EXPORT_SYMBOL_GPL(HYPERVISOR_physdev_op);
+EXPORT_SYMBOL_GPL(privcmd_call);
diff --git a/arch/arm/xen/grant-table.c b/arch/arm/xen/grant-table.c
index dbd1330..859a9bb 100644
--- a/arch/arm/xen/grant-table.c
+++ b/arch/arm/xen/grant-table.c
@@ -33,7 +33,7 @@
#include <xen/page.h>
#include <xen/grant_table.h>
-int arch_gnttab_map_shared(unsigned long *frames, unsigned long nr_gframes,
+int arch_gnttab_map_shared(xen_pfn_t *frames, unsigned long nr_gframes,
unsigned long max_nr_gframes,
void **__shared)
{
diff --git a/arch/arm/xen/hypercall.S b/arch/arm/xen/hypercall.S
index 074f5ed..71f7239 100644
--- a/arch/arm/xen/hypercall.S
+++ b/arch/arm/xen/hypercall.S
@@ -48,20 +48,16 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
+#include <asm/opcodes-virt.h>
#include <xen/interface/xen.h>
-/* HVC 0xEA1 */
-#ifdef CONFIG_THUMB2_KERNEL
-#define xen_hvc .word 0xf7e08ea1
-#else
-#define xen_hvc .word 0xe140ea71
-#endif
+#define XEN_IMM 0xEA1
#define HYPERCALL_SIMPLE(hypercall) \
ENTRY(HYPERVISOR_##hypercall) \
mov r12, #__HYPERVISOR_##hypercall; \
- xen_hvc; \
+ __HVC(XEN_IMM); \
mov pc, lr; \
ENDPROC(HYPERVISOR_##hypercall)
@@ -76,7 +72,7 @@
stmdb sp!, {r4} \
ldr r4, [sp, #4] \
mov r12, #__HYPERVISOR_##hypercall; \
- xen_hvc \
+ __HVC(XEN_IMM); \
ldm sp!, {r4} \
mov pc, lr \
ENDPROC(HYPERVISOR_##hypercall)
@@ -100,7 +96,7 @@
mov r2, r3
ldr r3, [sp, #8]
ldr r4, [sp, #4]
- xen_hvc
+ __HVC(XEN_IMM)
ldm sp!, {r4}
mov pc, lr
ENDPROC(privcmd_call);
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index ef54a59..15ac18a 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -1,6 +1,7 @@
config ARM64
def_bool y
select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
+ select ARCH_WANT_COMPAT_IPC_PARSE_VERSION
select GENERIC_CLOCKEVENTS
select GENERIC_HARDIRQS_NO_DEPRECATED
select GENERIC_IOMAP
diff --git a/arch/arm64/include/asm/elf.h b/arch/arm64/include/asm/elf.h
index cf28464..07fea29 100644
--- a/arch/arm64/include/asm/elf.h
+++ b/arch/arm64/include/asm/elf.h
@@ -25,12 +25,10 @@
#include <asm/user.h>
typedef unsigned long elf_greg_t;
-typedef unsigned long elf_freg_t[3];
#define ELF_NGREG (sizeof (struct pt_regs) / sizeof(elf_greg_t))
typedef elf_greg_t elf_gregset_t[ELF_NGREG];
-
-typedef struct user_fp elf_fpregset_t;
+typedef struct user_fpsimd_state elf_fpregset_t;
#define EM_AARCH64 183
@@ -87,7 +85,6 @@
#define R_AARCH64_MOVW_PREL_G2_NC 292
#define R_AARCH64_MOVW_PREL_G3 293
-
/*
* These are used to set parameters in the core dumps.
*/
diff --git a/arch/arm64/include/asm/fpsimd.h b/arch/arm64/include/asm/fpsimd.h
index b42fab9..c43b4ac 100644
--- a/arch/arm64/include/asm/fpsimd.h
+++ b/arch/arm64/include/asm/fpsimd.h
@@ -25,9 +25,8 @@
* - FPSR and FPCR
* - 32 128-bit data registers
*
- * Note that user_fp forms a prefix of this structure, which is relied
- * upon in the ptrace FP/SIMD accessors. struct user_fpsimd_state must
- * form a prefix of struct fpsimd_state.
+ * Note that user_fpsimd forms a prefix of this structure, which is
+ * relied upon in the ptrace FP/SIMD accessors.
*/
struct fpsimd_state {
union {
diff --git a/arch/arm64/include/asm/io.h b/arch/arm64/include/asm/io.h
index 74a2a7d3..d2f05a6 100644
--- a/arch/arm64/include/asm/io.h
+++ b/arch/arm64/include/asm/io.h
@@ -114,7 +114,7 @@
* I/O port access primitives.
*/
#define IO_SPACE_LIMIT 0xffff
-#define PCI_IOBASE ((void __iomem *)0xffffffbbfffe0000UL)
+#define PCI_IOBASE ((void __iomem *)(MODULES_VADDR - SZ_2M))
static inline u8 inb(unsigned long addr)
{
@@ -222,12 +222,12 @@
extern void __iounmap(volatile void __iomem *addr);
#define PROT_DEFAULT (PTE_TYPE_PAGE | PTE_AF | PTE_DIRTY)
-#define PROT_DEVICE_nGnRE (PROT_DEFAULT | PTE_XN | PTE_ATTRINDX(MT_DEVICE_nGnRE))
+#define PROT_DEVICE_nGnRE (PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_ATTRINDX(MT_DEVICE_nGnRE))
#define PROT_NORMAL_NC (PROT_DEFAULT | PTE_ATTRINDX(MT_NORMAL_NC))
-#define ioremap(addr, size) __ioremap((addr), (size), PROT_DEVICE_nGnRE)
-#define ioremap_nocache(addr, size) __ioremap((addr), (size), PROT_DEVICE_nGnRE)
-#define ioremap_wc(addr, size) __ioremap((addr), (size), PROT_NORMAL_NC)
+#define ioremap(addr, size) __ioremap((addr), (size), __pgprot(PROT_DEVICE_nGnRE))
+#define ioremap_nocache(addr, size) __ioremap((addr), (size), __pgprot(PROT_DEVICE_nGnRE))
+#define ioremap_wc(addr, size) __ioremap((addr), (size), __pgprot(PROT_NORMAL_NC))
#define iounmap __iounmap
#define ARCH_HAS_IOREMAP_WC
diff --git a/arch/arm64/include/asm/pgtable-hwdef.h b/arch/arm64/include/asm/pgtable-hwdef.h
index 0f3b458..75fd13d 100644
--- a/arch/arm64/include/asm/pgtable-hwdef.h
+++ b/arch/arm64/include/asm/pgtable-hwdef.h
@@ -38,7 +38,8 @@
#define PMD_SECT_S (_AT(pmdval_t, 3) << 8)
#define PMD_SECT_AF (_AT(pmdval_t, 1) << 10)
#define PMD_SECT_NG (_AT(pmdval_t, 1) << 11)
-#define PMD_SECT_XN (_AT(pmdval_t, 1) << 54)
+#define PMD_SECT_PXN (_AT(pmdval_t, 1) << 53)
+#define PMD_SECT_UXN (_AT(pmdval_t, 1) << 54)
/*
* AttrIndx[2:0] encoding (mapping attributes defined in the MAIR* registers).
@@ -57,7 +58,8 @@
#define PTE_SHARED (_AT(pteval_t, 3) << 8) /* SH[1:0], inner shareable */
#define PTE_AF (_AT(pteval_t, 1) << 10) /* Access Flag */
#define PTE_NG (_AT(pteval_t, 1) << 11) /* nG */
-#define PTE_XN (_AT(pteval_t, 1) << 54) /* XN */
+#define PTE_PXN (_AT(pteval_t, 1) << 53) /* Privileged XN */
+#define PTE_UXN (_AT(pteval_t, 1) << 54) /* User XN */
/*
* AttrIndx[2:0] encoding (mapping attributes defined in the MAIR* registers).
diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h
index 8960239..14aba2d 100644
--- a/arch/arm64/include/asm/pgtable.h
+++ b/arch/arm64/include/asm/pgtable.h
@@ -62,23 +62,23 @@
#define _MOD_PROT(p, b) __pgprot(pgprot_val(p) | (b))
-#define PAGE_NONE _MOD_PROT(pgprot_default, PTE_NG | PTE_XN | PTE_RDONLY)
-#define PAGE_SHARED _MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_XN)
-#define PAGE_SHARED_EXEC _MOD_PROT(pgprot_default, PTE_USER | PTE_NG)
-#define PAGE_COPY _MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_XN | PTE_RDONLY)
-#define PAGE_COPY_EXEC _MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_RDONLY)
-#define PAGE_READONLY _MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_XN | PTE_RDONLY)
-#define PAGE_READONLY_EXEC _MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_RDONLY)
-#define PAGE_KERNEL _MOD_PROT(pgprot_default, PTE_XN | PTE_DIRTY)
-#define PAGE_KERNEL_EXEC _MOD_PROT(pgprot_default, PTE_DIRTY)
+#define PAGE_NONE _MOD_PROT(pgprot_default, PTE_NG | PTE_PXN | PTE_UXN | PTE_RDONLY)
+#define PAGE_SHARED _MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_PXN | PTE_UXN)
+#define PAGE_SHARED_EXEC _MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_PXN)
+#define PAGE_COPY _MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_PXN | PTE_UXN | PTE_RDONLY)
+#define PAGE_COPY_EXEC _MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_PXN | PTE_RDONLY)
+#define PAGE_READONLY _MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_PXN | PTE_UXN | PTE_RDONLY)
+#define PAGE_READONLY_EXEC _MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_PXN | PTE_RDONLY)
+#define PAGE_KERNEL _MOD_PROT(pgprot_default, PTE_PXN | PTE_UXN | PTE_DIRTY)
+#define PAGE_KERNEL_EXEC _MOD_PROT(pgprot_default, PTE_UXN | PTE_DIRTY)
-#define __PAGE_NONE __pgprot(_PAGE_DEFAULT | PTE_NG | PTE_XN | PTE_RDONLY)
-#define __PAGE_SHARED __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_XN)
-#define __PAGE_SHARED_EXEC __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG)
-#define __PAGE_COPY __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_XN | PTE_RDONLY)
-#define __PAGE_COPY_EXEC __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_RDONLY)
-#define __PAGE_READONLY __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_XN | PTE_RDONLY)
-#define __PAGE_READONLY_EXEC __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_RDONLY)
+#define __PAGE_NONE __pgprot(_PAGE_DEFAULT | PTE_NG | PTE_PXN | PTE_UXN | PTE_RDONLY)
+#define __PAGE_SHARED __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_UXN)
+#define __PAGE_SHARED_EXEC __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN)
+#define __PAGE_COPY __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_UXN | PTE_RDONLY)
+#define __PAGE_COPY_EXEC __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_RDONLY)
+#define __PAGE_READONLY __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_UXN | PTE_RDONLY)
+#define __PAGE_READONLY_EXEC __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_RDONLY)
#endif /* __ASSEMBLY__ */
@@ -130,10 +130,10 @@
#define pte_young(pte) (pte_val(pte) & PTE_AF)
#define pte_special(pte) (pte_val(pte) & PTE_SPECIAL)
#define pte_write(pte) (!(pte_val(pte) & PTE_RDONLY))
-#define pte_exec(pte) (!(pte_val(pte) & PTE_XN))
+#define pte_exec(pte) (!(pte_val(pte) & PTE_UXN))
#define pte_present_exec_user(pte) \
- ((pte_val(pte) & (PTE_VALID | PTE_USER | PTE_XN)) == \
+ ((pte_val(pte) & (PTE_VALID | PTE_USER | PTE_UXN)) == \
(PTE_VALID | PTE_USER))
#define PTE_BIT_FUNC(fn,op) \
@@ -262,7 +262,7 @@
static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
{
- const pteval_t mask = PTE_USER | PTE_XN | PTE_RDONLY;
+ const pteval_t mask = PTE_USER | PTE_PXN | PTE_UXN | PTE_RDONLY;
pte_val(pte) = (pte_val(pte) & ~mask) | (pgprot_val(newprot) & mask);
return pte;
}
diff --git a/arch/arm64/include/asm/processor.h b/arch/arm64/include/asm/processor.h
index 5d81004..77f696c 100644
--- a/arch/arm64/include/asm/processor.h
+++ b/arch/arm64/include/asm/processor.h
@@ -43,6 +43,8 @@
#else
#define STACK_TOP STACK_TOP_MAX
#endif /* CONFIG_COMPAT */
+
+#define ARCH_LOW_ADDRESS_LIMIT PHYS_MASK
#endif /* __KERNEL__ */
struct debug_info {
diff --git a/arch/arm64/include/asm/unistd.h b/arch/arm64/include/asm/unistd.h
index 63f853f..68aff28 100644
--- a/arch/arm64/include/asm/unistd.h
+++ b/arch/arm64/include/asm/unistd.h
@@ -14,7 +14,6 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifdef CONFIG_COMPAT
-#define __ARCH_WANT_COMPAT_IPC_PARSE_VERSION
#define __ARCH_WANT_COMPAT_STAT64
#define __ARCH_WANT_SYS_GETHOSTNAME
#define __ARCH_WANT_SYS_PAUSE
diff --git a/arch/arm64/kernel/perf_event.c b/arch/arm64/kernel/perf_event.c
index ecbf2d8..c76c7241 100644
--- a/arch/arm64/kernel/perf_event.c
+++ b/arch/arm64/kernel/perf_event.c
@@ -613,17 +613,11 @@
ARMV8_PMUV3_PERFCTR_BUS_ACCESS = 0x19,
ARMV8_PMUV3_PERFCTR_MEM_ERROR = 0x1A,
ARMV8_PMUV3_PERFCTR_BUS_CYCLES = 0x1D,
-
- /*
- * This isn't an architected event.
- * We detect this event number and use the cycle counter instead.
- */
- ARMV8_PMUV3_PERFCTR_CPU_CYCLES = 0xFF,
};
/* PMUv3 HW events mapping. */
static const unsigned armv8_pmuv3_perf_map[PERF_COUNT_HW_MAX] = {
- [PERF_COUNT_HW_CPU_CYCLES] = ARMV8_PMUV3_PERFCTR_CPU_CYCLES,
+ [PERF_COUNT_HW_CPU_CYCLES] = ARMV8_PMUV3_PERFCTR_CLOCK_CYCLES,
[PERF_COUNT_HW_INSTRUCTIONS] = ARMV8_PMUV3_PERFCTR_INSTR_EXECUTED,
[PERF_COUNT_HW_CACHE_REFERENCES] = ARMV8_PMUV3_PERFCTR_L1_DCACHE_ACCESS,
[PERF_COUNT_HW_CACHE_MISSES] = ARMV8_PMUV3_PERFCTR_L1_DCACHE_REFILL,
@@ -1106,7 +1100,7 @@
unsigned long evtype = event->config_base & ARMV8_EVTYPE_EVENT;
/* Always place a cycle counter into the cycle counter. */
- if (evtype == ARMV8_PMUV3_PERFCTR_CPU_CYCLES) {
+ if (evtype == ARMV8_PMUV3_PERFCTR_CLOCK_CYCLES) {
if (test_and_set_bit(ARMV8_IDX_CYCLE_COUNTER, cpuc->used_mask))
return -EAGAIN;
diff --git a/arch/arm64/kernel/process.c b/arch/arm64/kernel/process.c
index f22965e..e04cebd 100644
--- a/arch/arm64/kernel/process.c
+++ b/arch/arm64/kernel/process.c
@@ -310,24 +310,6 @@
}
/*
- * Fill in the task's elfregs structure for a core dump.
- */
-int dump_task_regs(struct task_struct *t, elf_gregset_t *elfregs)
-{
- elf_core_copy_regs(elfregs, task_pt_regs(t));
- return 1;
-}
-
-/*
- * fill in the fpe structure for a core dump...
- */
-int dump_fpu (struct pt_regs *regs, struct user_fp *fp)
-{
- return 0;
-}
-EXPORT_SYMBOL(dump_fpu);
-
-/*
* Shuffle the argument into the correct register before calling the
* thread function. x1 is the thread argument, x2 is the pointer to
* the thread function, and x3 points to the exit function.
diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c
index 226b6bf..538300f 100644
--- a/arch/arm64/kernel/smp.c
+++ b/arch/arm64/kernel/smp.c
@@ -211,8 +211,7 @@
* before we continue.
*/
set_cpu_online(cpu, true);
- while (!cpu_active(cpu))
- cpu_relax();
+ complete(&cpu_running);
/*
* OK, it's off to the idle thread for us
diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c
index efbf7df..4cd2893 100644
--- a/arch/arm64/mm/init.c
+++ b/arch/arm64/mm/init.c
@@ -80,7 +80,7 @@
#ifdef CONFIG_ZONE_DMA32
/* 4GB maximum for 32-bit only capable devices */
max_dma32 = min(max, MAX_DMA32_PFN);
- zone_size[ZONE_DMA32] = max_dma32 - min;
+ zone_size[ZONE_DMA32] = max(min, max_dma32) - min;
#endif
zone_size[ZONE_NORMAL] = max - max_dma32;
diff --git a/arch/frv/Kconfig b/arch/frv/Kconfig
index b741250..df2eb4b 100644
--- a/arch/frv/Kconfig
+++ b/arch/frv/Kconfig
@@ -13,6 +13,7 @@
select GENERIC_CPU_DEVICES
select ARCH_WANT_IPC_PARSE_VERSION
select GENERIC_KERNEL_THREAD
+ select GENERIC_KERNEL_EXECVE
config ZONE_DMA
bool
diff --git a/arch/frv/boot/Makefile b/arch/frv/boot/Makefile
index 6ae3254..636d5bb 100644
--- a/arch/frv/boot/Makefile
+++ b/arch/frv/boot/Makefile
@@ -17,6 +17,8 @@
INITRD_PHYS = 0x02180000
INITRD_VIRT = 0x02180000
+OBJCOPYFLAGS :=-O binary -R .note -R .note.gnu.build-id -R .comment
+
#
# If you don't define ZRELADDR above,
# then it defaults to ZTEXTADDR
@@ -32,18 +34,18 @@
targets: $(obj)/Image
$(obj)/Image: vmlinux FORCE
- $(OBJCOPY) -O binary -R .note -R .comment -S vmlinux $@
+ $(OBJCOPY) $(OBJCOPYFLAGS) -S vmlinux $@
#$(obj)/Image: $(CONFIGURE) $(SYSTEM)
-# $(OBJCOPY) -O binary -R .note -R .comment -g -S $(SYSTEM) $@
+# $(OBJCOPY) $(OBJCOPYFLAGS) -g -S $(SYSTEM) $@
bzImage: zImage
zImage: $(CONFIGURE) compressed/$(LINUX)
- $(OBJCOPY) -O binary -R .note -R .comment -S compressed/$(LINUX) $@
+ $(OBJCOPY) $(OBJCOPYFLAGS) -S compressed/$(LINUX) $@
bootpImage: bootp/bootp
- $(OBJCOPY) -O binary -R .note -R .comment -S bootp/bootp $@
+ $(OBJCOPY) $(OBJCOPYFLAGS) -S bootp/bootp $@
compressed/$(LINUX): $(LINUX) dep
@$(MAKE) -C compressed $(LINUX)
diff --git a/arch/frv/include/asm/unistd.h b/arch/frv/include/asm/unistd.h
index 266a5b2..2358634 100644
--- a/arch/frv/include/asm/unistd.h
+++ b/arch/frv/include/asm/unistd.h
@@ -30,7 +30,6 @@
#define __ARCH_WANT_SYS_RT_SIGACTION
#define __ARCH_WANT_SYS_RT_SIGSUSPEND
#define __ARCH_WANT_SYS_EXECVE
-#define __ARCH_WANT_KERNEL_EXECVE
/*
* "Conditional" syscalls
diff --git a/arch/frv/kernel/entry.S b/arch/frv/kernel/entry.S
index ee0beb3..dfcd263 100644
--- a/arch/frv/kernel/entry.S
+++ b/arch/frv/kernel/entry.S
@@ -869,11 +869,6 @@
call schedule_tail
calll.p @(gr21,gr0)
or gr20,gr20,gr8
- bra sys_exit
-
- .globl ret_from_kernel_execve
-ret_from_kernel_execve:
- ori gr28,0,sp
bra __syscall_exit
###################################################################################################
@@ -1080,27 +1075,10 @@
subicc gr5,#0,gr0,icc0
beq icc0,#0,__entry_return_direct
-__entry_preempt_need_resched:
- ldi @(gr15,#TI_FLAGS),gr4
- andicc gr4,#_TIF_NEED_RESCHED,gr0,icc0
- beq icc0,#1,__entry_return_direct
-
- setlos #PREEMPT_ACTIVE,gr5
- sti gr5,@(gr15,#TI_FLAGS)
-
- andi gr23,#~PSR_PIL,gr23
- movgs gr23,psr
-
- call schedule
- sti gr0,@(gr15,#TI_PRE_COUNT)
-
- movsg psr,gr23
- ori gr23,#PSR_PIL_14,gr23
- movgs gr23,psr
- bra __entry_preempt_need_resched
-#else
- bra __entry_return_direct
+ subcc gr0,gr0,gr0,icc2 /* set Z and clear C */
+ call preempt_schedule_irq
#endif
+ bra __entry_return_direct
###############################################################################
diff --git a/arch/frv/kernel/process.c b/arch/frv/kernel/process.c
index e1e3aa1..7e33215 100644
--- a/arch/frv/kernel/process.c
+++ b/arch/frv/kernel/process.c
@@ -181,6 +181,9 @@
childregs = (struct pt_regs *)
(task_stack_page(p) + THREAD_SIZE - FRV_FRAME0_SIZE);
+ /* set up the userspace frame (the only place that the USP is stored) */
+ *childregs = *__kernel_frame0_ptr;
+
p->set_child_tid = p->clear_child_tid = NULL;
p->thread.frame = childregs;
@@ -191,10 +194,8 @@
p->thread.frame0 = childregs;
if (unlikely(!regs)) {
- memset(childregs, 0, sizeof(struct pt_regs));
childregs->gr9 = usp; /* function */
childregs->gr8 = arg;
- childregs->psr = PSR_S;
p->thread.pc = (unsigned long) ret_from_kernel_thread;
save_user_regs(p->thread.user);
return 0;
diff --git a/arch/frv/mb93090-mb00/pci-dma-nommu.c b/arch/frv/mb93090-mb00/pci-dma-nommu.c
index e47857f..b99c2a7 100644
--- a/arch/frv/mb93090-mb00/pci-dma-nommu.c
+++ b/arch/frv/mb93090-mb00/pci-dma-nommu.c
@@ -11,6 +11,7 @@
#include <linux/types.h>
#include <linux/slab.h>
+#include <linux/export.h>
#include <linux/dma-mapping.h>
#include <linux/list.h>
#include <linux/pci.h>
diff --git a/arch/h8300/include/asm/cache.h b/arch/h8300/include/asm/cache.h
index c635028..05887a1 100644
--- a/arch/h8300/include/asm/cache.h
+++ b/arch/h8300/include/asm/cache.h
@@ -2,7 +2,8 @@
#define __ARCH_H8300_CACHE_H
/* bytes per L1 cache line */
-#define L1_CACHE_BYTES 4
+#define L1_CACHE_SHIFT 2
+#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)
/* m68k-elf-gcc 2.95.2 doesn't like these */
diff --git a/arch/ia64/include/asm/Kbuild b/arch/ia64/include/asm/Kbuild
index 4a159da..dd02f09 100644
--- a/arch/ia64/include/asm/Kbuild
+++ b/arch/ia64/include/asm/Kbuild
@@ -1,3 +1,4 @@
generic-y += clkdev.h
generic-y += exec.h
+generic-y += kvm_para.h
diff --git a/arch/ia64/include/asm/kvm_para.h b/arch/ia64/include/asm/kvm_para.h
deleted file mode 100644
index 47c00f9..0000000
--- a/arch/ia64/include/asm/kvm_para.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * Copyright (C) 2007 Xiantao Zhang <xiantao.zhang@intel.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
- * Place - Suite 330, Boston, MA 02111-1307 USA.
- *
- */
-#ifndef __IA64_KVM_PARA_H
-#define __IA64_KVM_PARA_H
-
-#include <uapi/asm/kvm_para.h>
-
-
-static inline unsigned int kvm_arch_para_features(void)
-{
- return 0;
-}
-
-static inline bool kvm_check_and_clear_guest_paused(void)
-{
- return false;
-}
-
-#endif
diff --git a/arch/ia64/mm/init.c b/arch/ia64/mm/init.c
index acd5b68..082e383 100644
--- a/arch/ia64/mm/init.c
+++ b/arch/ia64/mm/init.c
@@ -637,7 +637,6 @@
high_memory = __va(max_low_pfn * PAGE_SIZE);
- reset_zone_present_pages();
for_each_online_pgdat(pgdat)
if (pgdat->bdata->node_bootmem_map)
totalram_pages += free_all_bootmem_node(pgdat);
diff --git a/arch/m68k/include/asm/Kbuild b/arch/m68k/include/asm/Kbuild
index ecb5408..88fa3ac 100644
--- a/arch/m68k/include/asm/Kbuild
+++ b/arch/m68k/include/asm/Kbuild
@@ -1,5 +1,3 @@
-include include/asm-generic/Kbuild.asm
-header-y += cachectl.h
generic-y += bitsperlong.h
generic-y += clkdev.h
diff --git a/arch/m68k/include/asm/ptrace.h b/arch/m68k/include/asm/ptrace.h
index 5e08b59..0f71704 100644
--- a/arch/m68k/include/asm/ptrace.h
+++ b/arch/m68k/include/asm/ptrace.h
@@ -1,82 +1,10 @@
#ifndef _M68K_PTRACE_H
#define _M68K_PTRACE_H
-#define PT_D1 0
-#define PT_D2 1
-#define PT_D3 2
-#define PT_D4 3
-#define PT_D5 4
-#define PT_D6 5
-#define PT_D7 6
-#define PT_A0 7
-#define PT_A1 8
-#define PT_A2 9
-#define PT_A3 10
-#define PT_A4 11
-#define PT_A5 12
-#define PT_A6 13
-#define PT_D0 14
-#define PT_USP 15
-#define PT_ORIG_D0 16
-#define PT_SR 17
-#define PT_PC 18
+#include <uapi/asm/ptrace.h>
#ifndef __ASSEMBLY__
-/* this struct defines the way the registers are stored on the
- stack during a system call. */
-
-struct pt_regs {
- long d1;
- long d2;
- long d3;
- long d4;
- long d5;
- long a0;
- long a1;
- long a2;
- long d0;
- long orig_d0;
- long stkadj;
-#ifdef CONFIG_COLDFIRE
- unsigned format : 4; /* frame format specifier */
- unsigned vector : 12; /* vector offset */
- unsigned short sr;
- unsigned long pc;
-#else
- unsigned short sr;
- unsigned long pc;
- unsigned format : 4; /* frame format specifier */
- unsigned vector : 12; /* vector offset */
-#endif
-};
-
-/*
- * This is the extended stack used by signal handlers and the context
- * switcher: it's pushed after the normal "struct pt_regs".
- */
-struct switch_stack {
- unsigned long d6;
- unsigned long d7;
- unsigned long a3;
- unsigned long a4;
- unsigned long a5;
- unsigned long a6;
- unsigned long retpc;
-};
-
-/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
-#define PTRACE_GETREGS 12
-#define PTRACE_SETREGS 13
-#define PTRACE_GETFPREGS 14
-#define PTRACE_SETFPREGS 15
-
-#define PTRACE_GET_THREAD_AREA 25
-
-#define PTRACE_SINGLEBLOCK 33 /* resume execution until next branch */
-
-#ifdef __KERNEL__
-
#ifndef PS_S
#define PS_S (0x2000)
#define PS_M (0x1000)
@@ -94,6 +22,5 @@
#define arch_has_block_step() (1)
#endif
-#endif /* __KERNEL__ */
#endif /* __ASSEMBLY__ */
#endif /* _M68K_PTRACE_H */
diff --git a/arch/m68k/include/asm/setup.h b/arch/m68k/include/asm/setup.h
index 00c2c53..65e78a2d 100644
--- a/arch/m68k/include/asm/setup.h
+++ b/arch/m68k/include/asm/setup.h
@@ -19,33 +19,12 @@
** Redesign of the boot information structure; moved boot information
** structure to bootinfo.h
*/
-
#ifndef _M68K_SETUP_H
#define _M68K_SETUP_H
+#include <uapi/asm/setup.h>
- /*
- * Linux/m68k Architectures
- */
-
-#define MACH_AMIGA 1
-#define MACH_ATARI 2
-#define MACH_MAC 3
-#define MACH_APOLLO 4
-#define MACH_SUN3 5
-#define MACH_MVME147 6
-#define MACH_MVME16x 7
-#define MACH_BVME6000 8
-#define MACH_HP300 9
-#define MACH_Q40 10
-#define MACH_SUN3X 11
-#define MACH_M54XX 12
-
-#define COMMAND_LINE_SIZE 256
-
-#ifdef __KERNEL__
-
#define CL_SIZE COMMAND_LINE_SIZE
#ifndef __ASSEMBLY__
@@ -194,63 +173,6 @@
# define MACH_TYPE (m68k_machtype)
#endif
-#endif /* __KERNEL__ */
-
-
- /*
- * CPU, FPU and MMU types
- *
- * Note: we may rely on the following equalities:
- *
- * CPU_68020 == MMU_68851
- * CPU_68030 == MMU_68030
- * CPU_68040 == FPU_68040 == MMU_68040
- * CPU_68060 == FPU_68060 == MMU_68060
- */
-
-#define CPUB_68020 0
-#define CPUB_68030 1
-#define CPUB_68040 2
-#define CPUB_68060 3
-#define CPUB_COLDFIRE 4
-
-#define CPU_68020 (1<<CPUB_68020)
-#define CPU_68030 (1<<CPUB_68030)
-#define CPU_68040 (1<<CPUB_68040)
-#define CPU_68060 (1<<CPUB_68060)
-#define CPU_COLDFIRE (1<<CPUB_COLDFIRE)
-
-#define FPUB_68881 0
-#define FPUB_68882 1
-#define FPUB_68040 2 /* Internal FPU */
-#define FPUB_68060 3 /* Internal FPU */
-#define FPUB_SUNFPA 4 /* Sun-3 FPA */
-#define FPUB_COLDFIRE 5 /* ColdFire FPU */
-
-#define FPU_68881 (1<<FPUB_68881)
-#define FPU_68882 (1<<FPUB_68882)
-#define FPU_68040 (1<<FPUB_68040)
-#define FPU_68060 (1<<FPUB_68060)
-#define FPU_SUNFPA (1<<FPUB_SUNFPA)
-#define FPU_COLDFIRE (1<<FPUB_COLDFIRE)
-
-#define MMUB_68851 0
-#define MMUB_68030 1 /* Internal MMU */
-#define MMUB_68040 2 /* Internal MMU */
-#define MMUB_68060 3 /* Internal MMU */
-#define MMUB_APOLLO 4 /* Custom Apollo */
-#define MMUB_SUN3 5 /* Custom Sun-3 */
-#define MMUB_COLDFIRE 6 /* Internal MMU */
-
-#define MMU_68851 (1<<MMUB_68851)
-#define MMU_68030 (1<<MMUB_68030)
-#define MMU_68040 (1<<MMUB_68040)
-#define MMU_68060 (1<<MMUB_68060)
-#define MMU_SUN3 (1<<MMUB_SUN3)
-#define MMU_APOLLO (1<<MMUB_APOLLO)
-#define MMU_COLDFIRE (1<<MMUB_COLDFIRE)
-
-#ifdef __KERNEL__
#ifndef __ASSEMBLY__
extern unsigned long m68k_cputype;
@@ -385,6 +307,4 @@
extern struct mem_info m68k_memory[NUM_MEMINFO];/* memory description */
#endif
-#endif /* __KERNEL__ */
-
#endif /* _M68K_SETUP_H */
diff --git a/arch/m68k/include/asm/signal.h b/arch/m68k/include/asm/signal.h
index 60e8866..2df26b5 100644
--- a/arch/m68k/include/asm/signal.h
+++ b/arch/m68k/include/asm/signal.h
@@ -1,12 +1,8 @@
#ifndef _M68K_SIGNAL_H
#define _M68K_SIGNAL_H
-#include <linux/types.h>
+#include <uapi/asm/signal.h>
-/* Avoid too many header ordering problems. */
-struct siginfo;
-
-#ifdef __KERNEL__
/* Most things should be clean enough to redefine this at will, if care
is taken to make libc match. */
@@ -20,92 +16,6 @@
unsigned long sig[_NSIG_WORDS];
} sigset_t;
-#else
-/* Here we must cater to libcs that poke about in kernel headers. */
-
-#define NSIG 32
-typedef unsigned long sigset_t;
-
-#endif /* __KERNEL__ */
-
-#define SIGHUP 1
-#define SIGINT 2
-#define SIGQUIT 3
-#define SIGILL 4
-#define SIGTRAP 5
-#define SIGABRT 6
-#define SIGIOT 6
-#define SIGBUS 7
-#define SIGFPE 8
-#define SIGKILL 9
-#define SIGUSR1 10
-#define SIGSEGV 11
-#define SIGUSR2 12
-#define SIGPIPE 13
-#define SIGALRM 14
-#define SIGTERM 15
-#define SIGSTKFLT 16
-#define SIGCHLD 17
-#define SIGCONT 18
-#define SIGSTOP 19
-#define SIGTSTP 20
-#define SIGTTIN 21
-#define SIGTTOU 22
-#define SIGURG 23
-#define SIGXCPU 24
-#define SIGXFSZ 25
-#define SIGVTALRM 26
-#define SIGPROF 27
-#define SIGWINCH 28
-#define SIGIO 29
-#define SIGPOLL SIGIO
-/*
-#define SIGLOST 29
-*/
-#define SIGPWR 30
-#define SIGSYS 31
-#define SIGUNUSED 31
-
-/* These should not be considered constants from userland. */
-#define SIGRTMIN 32
-#define SIGRTMAX _NSIG
-
-/*
- * SA_FLAGS values:
- *
- * SA_ONSTACK indicates that a registered stack_t will be used.
- * SA_RESTART flag to get restarting signals (which were the default long ago)
- * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
- * SA_RESETHAND clears the handler when the signal is delivered.
- * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
- * SA_NODEFER prevents the current signal from being masked in the handler.
- *
- * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
- * Unix names RESETHAND and NODEFER respectively.
- */
-#define SA_NOCLDSTOP 0x00000001
-#define SA_NOCLDWAIT 0x00000002
-#define SA_SIGINFO 0x00000004
-#define SA_ONSTACK 0x08000000
-#define SA_RESTART 0x10000000
-#define SA_NODEFER 0x40000000
-#define SA_RESETHAND 0x80000000
-
-#define SA_NOMASK SA_NODEFER
-#define SA_ONESHOT SA_RESETHAND
-
-/*
- * sigaltstack controls
- */
-#define SS_ONSTACK 1
-#define SS_DISABLE 2
-
-#define MINSIGSTKSZ 2048
-#define SIGSTKSZ 8192
-
-#include <asm-generic/signal-defs.h>
-
-#ifdef __KERNEL__
struct old_sigaction {
__sighandler_t sa_handler;
old_sigset_t sa_mask;
@@ -123,31 +33,6 @@
struct k_sigaction {
struct sigaction sa;
};
-#else
-/* Here we must cater to libcs that poke about in kernel headers. */
-
-struct sigaction {
- union {
- __sighandler_t _sa_handler;
- void (*_sa_sigaction)(int, struct siginfo *, void *);
- } _u;
- sigset_t sa_mask;
- unsigned long sa_flags;
- void (*sa_restorer)(void);
-};
-
-#define sa_handler _u._sa_handler
-#define sa_sigaction _u._sa_sigaction
-
-#endif /* __KERNEL__ */
-
-typedef struct sigaltstack {
- void __user *ss_sp;
- int ss_flags;
- size_t ss_size;
-} stack_t;
-
-#ifdef __KERNEL__
#include <asm/sigcontext.h>
#ifndef CONFIG_CPU_HAS_NO_BITFIELDS
@@ -156,7 +41,7 @@
static inline void sigaddset(sigset_t *set, int _sig)
{
asm ("bfset %0{%1,#1}"
- : "+od" (*set)
+ : "+o" (*set)
: "id" ((_sig - 1) ^ 31)
: "cc");
}
@@ -164,7 +49,7 @@
static inline void sigdelset(sigset_t *set, int _sig)
{
asm ("bfclr %0{%1,#1}"
- : "+od" (*set)
+ : "+o" (*set)
: "id" ((_sig - 1) ^ 31)
: "cc");
}
@@ -180,7 +65,7 @@
int ret;
asm ("bfextu %1{%2,#1},%0"
: "=d" (ret)
- : "od" (*set), "id" ((_sig-1) ^ 31)
+ : "o" (*set), "id" ((_sig-1) ^ 31)
: "cc");
return ret;
}
@@ -208,5 +93,4 @@
extern void ptrace_signal_deliver(struct pt_regs *regs, void *cookie);
#endif /* __uClinux__ */
-#endif /* __KERNEL__ */
#endif /* _M68K_SIGNAL_H */
diff --git a/arch/m68k/include/asm/termios.h b/arch/m68k/include/asm/termios.h
index 0823032..ad8efb0 100644
--- a/arch/m68k/include/asm/termios.h
+++ b/arch/m68k/include/asm/termios.h
@@ -1,27 +1,8 @@
#ifndef _M68K_TERMIOS_H
#define _M68K_TERMIOS_H
-#include <asm/termbits.h>
-#include <asm/ioctls.h>
+#include <uapi/asm/termios.h>
-struct winsize {
- unsigned short ws_row;
- unsigned short ws_col;
- unsigned short ws_xpixel;
- unsigned short ws_ypixel;
-};
-
-#define NCC 8
-struct termio {
- unsigned short c_iflag; /* input mode flags */
- unsigned short c_oflag; /* output mode flags */
- unsigned short c_cflag; /* control mode flags */
- unsigned short c_lflag; /* local mode flags */
- unsigned char c_line; /* line discipline */
- unsigned char c_cc[NCC]; /* control characters */
-};
-
-#ifdef __KERNEL__
/* intr=^C quit=^| erase=del kill=^U
eof=^D vtime=\0 vmin=\1 sxtc=\0
start=^Q stop=^S susp=^Z eol=\0
@@ -29,27 +10,6 @@
eol2=\0
*/
#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
-#endif
-
-/* modem lines */
-#define TIOCM_LE 0x001
-#define TIOCM_DTR 0x002
-#define TIOCM_RTS 0x004
-#define TIOCM_ST 0x008
-#define TIOCM_SR 0x010
-#define TIOCM_CTS 0x020
-#define TIOCM_CAR 0x040
-#define TIOCM_RNG 0x080
-#define TIOCM_DSR 0x100
-#define TIOCM_CD TIOCM_CAR
-#define TIOCM_RI TIOCM_RNG
-#define TIOCM_OUT1 0x2000
-#define TIOCM_OUT2 0x4000
-#define TIOCM_LOOP 0x8000
-
-/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
-
-#ifdef __KERNEL__
/*
* Translate a "termio" structure into a "termios". Ugh.
@@ -87,6 +47,4 @@
#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios))
#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios))
-#endif /* __KERNEL__ */
-
#endif /* _M68K_TERMIOS_H */
diff --git a/arch/m68k/include/asm/unistd.h b/arch/m68k/include/asm/unistd.h
index c702ad7..5fc7f7b 100644
--- a/arch/m68k/include/asm/unistd.h
+++ b/arch/m68k/include/asm/unistd.h
@@ -1,361 +1,10 @@
#ifndef _ASM_M68K_UNISTD_H_
#define _ASM_M68K_UNISTD_H_
-/*
- * This file contains the system call numbers.
- */
+#include <uapi/asm/unistd.h>
-#define __NR_restart_syscall 0
-#define __NR_exit 1
-#define __NR_fork 2
-#define __NR_read 3
-#define __NR_write 4
-#define __NR_open 5
-#define __NR_close 6
-#define __NR_waitpid 7
-#define __NR_creat 8
-#define __NR_link 9
-#define __NR_unlink 10
-#define __NR_execve 11
-#define __NR_chdir 12
-#define __NR_time 13
-#define __NR_mknod 14
-#define __NR_chmod 15
-#define __NR_chown 16
-/*#define __NR_break 17*/
-#define __NR_oldstat 18
-#define __NR_lseek 19
-#define __NR_getpid 20
-#define __NR_mount 21
-#define __NR_umount 22
-#define __NR_setuid 23
-#define __NR_getuid 24
-#define __NR_stime 25
-#define __NR_ptrace 26
-#define __NR_alarm 27
-#define __NR_oldfstat 28
-#define __NR_pause 29
-#define __NR_utime 30
-/*#define __NR_stty 31*/
-/*#define __NR_gtty 32*/
-#define __NR_access 33
-#define __NR_nice 34
-/*#define __NR_ftime 35*/
-#define __NR_sync 36
-#define __NR_kill 37
-#define __NR_rename 38
-#define __NR_mkdir 39
-#define __NR_rmdir 40
-#define __NR_dup 41
-#define __NR_pipe 42
-#define __NR_times 43
-/*#define __NR_prof 44*/
-#define __NR_brk 45
-#define __NR_setgid 46
-#define __NR_getgid 47
-#define __NR_signal 48
-#define __NR_geteuid 49
-#define __NR_getegid 50
-#define __NR_acct 51
-#define __NR_umount2 52
-/*#define __NR_lock 53*/
-#define __NR_ioctl 54
-#define __NR_fcntl 55
-/*#define __NR_mpx 56*/
-#define __NR_setpgid 57
-/*#define __NR_ulimit 58*/
-/*#define __NR_oldolduname 59*/
-#define __NR_umask 60
-#define __NR_chroot 61
-#define __NR_ustat 62
-#define __NR_dup2 63
-#define __NR_getppid 64
-#define __NR_getpgrp 65
-#define __NR_setsid 66
-#define __NR_sigaction 67
-#define __NR_sgetmask 68
-#define __NR_ssetmask 69
-#define __NR_setreuid 70
-#define __NR_setregid 71
-#define __NR_sigsuspend 72
-#define __NR_sigpending 73
-#define __NR_sethostname 74
-#define __NR_setrlimit 75
-#define __NR_getrlimit 76
-#define __NR_getrusage 77
-#define __NR_gettimeofday 78
-#define __NR_settimeofday 79
-#define __NR_getgroups 80
-#define __NR_setgroups 81
-#define __NR_select 82
-#define __NR_symlink 83
-#define __NR_oldlstat 84
-#define __NR_readlink 85
-#define __NR_uselib 86
-#define __NR_swapon 87
-#define __NR_reboot 88
-#define __NR_readdir 89
-#define __NR_mmap 90
-#define __NR_munmap 91
-#define __NR_truncate 92
-#define __NR_ftruncate 93
-#define __NR_fchmod 94
-#define __NR_fchown 95
-#define __NR_getpriority 96
-#define __NR_setpriority 97
-/*#define __NR_profil 98*/
-#define __NR_statfs 99
-#define __NR_fstatfs 100
-/*#define __NR_ioperm 101*/
-#define __NR_socketcall 102
-#define __NR_syslog 103
-#define __NR_setitimer 104
-#define __NR_getitimer 105
-#define __NR_stat 106
-#define __NR_lstat 107
-#define __NR_fstat 108
-/*#define __NR_olduname 109*/
-/*#define __NR_iopl 110*/ /* not supported */
-#define __NR_vhangup 111
-/*#define __NR_idle 112*/ /* Obsolete */
-/*#define __NR_vm86 113*/ /* not supported */
-#define __NR_wait4 114
-#define __NR_swapoff 115
-#define __NR_sysinfo 116
-#define __NR_ipc 117
-#define __NR_fsync 118
-#define __NR_sigreturn 119
-#define __NR_clone 120
-#define __NR_setdomainname 121
-#define __NR_uname 122
-#define __NR_cacheflush 123
-#define __NR_adjtimex 124
-#define __NR_mprotect 125
-#define __NR_sigprocmask 126
-#define __NR_create_module 127
-#define __NR_init_module 128
-#define __NR_delete_module 129
-#define __NR_get_kernel_syms 130
-#define __NR_quotactl 131
-#define __NR_getpgid 132
-#define __NR_fchdir 133
-#define __NR_bdflush 134
-#define __NR_sysfs 135
-#define __NR_personality 136
-/*#define __NR_afs_syscall 137*/ /* Syscall for Andrew File System */
-#define __NR_setfsuid 138
-#define __NR_setfsgid 139
-#define __NR__llseek 140
-#define __NR_getdents 141
-#define __NR__newselect 142
-#define __NR_flock 143
-#define __NR_msync 144
-#define __NR_readv 145
-#define __NR_writev 146
-#define __NR_getsid 147
-#define __NR_fdatasync 148
-#define __NR__sysctl 149
-#define __NR_mlock 150
-#define __NR_munlock 151
-#define __NR_mlockall 152
-#define __NR_munlockall 153
-#define __NR_sched_setparam 154
-#define __NR_sched_getparam 155
-#define __NR_sched_setscheduler 156
-#define __NR_sched_getscheduler 157
-#define __NR_sched_yield 158
-#define __NR_sched_get_priority_max 159
-#define __NR_sched_get_priority_min 160
-#define __NR_sched_rr_get_interval 161
-#define __NR_nanosleep 162
-#define __NR_mremap 163
-#define __NR_setresuid 164
-#define __NR_getresuid 165
-#define __NR_getpagesize 166
-#define __NR_query_module 167
-#define __NR_poll 168
-#define __NR_nfsservctl 169
-#define __NR_setresgid 170
-#define __NR_getresgid 171
-#define __NR_prctl 172
-#define __NR_rt_sigreturn 173
-#define __NR_rt_sigaction 174
-#define __NR_rt_sigprocmask 175
-#define __NR_rt_sigpending 176
-#define __NR_rt_sigtimedwait 177
-#define __NR_rt_sigqueueinfo 178
-#define __NR_rt_sigsuspend 179
-#define __NR_pread64 180
-#define __NR_pwrite64 181
-#define __NR_lchown 182
-#define __NR_getcwd 183
-#define __NR_capget 184
-#define __NR_capset 185
-#define __NR_sigaltstack 186
-#define __NR_sendfile 187
-#define __NR_getpmsg 188 /* some people actually want streams */
-#define __NR_putpmsg 189 /* some people actually want streams */
-#define __NR_vfork 190
-#define __NR_ugetrlimit 191
-#define __NR_mmap2 192
-#define __NR_truncate64 193
-#define __NR_ftruncate64 194
-#define __NR_stat64 195
-#define __NR_lstat64 196
-#define __NR_fstat64 197
-#define __NR_chown32 198
-#define __NR_getuid32 199
-#define __NR_getgid32 200
-#define __NR_geteuid32 201
-#define __NR_getegid32 202
-#define __NR_setreuid32 203
-#define __NR_setregid32 204
-#define __NR_getgroups32 205
-#define __NR_setgroups32 206
-#define __NR_fchown32 207
-#define __NR_setresuid32 208
-#define __NR_getresuid32 209
-#define __NR_setresgid32 210
-#define __NR_getresgid32 211
-#define __NR_lchown32 212
-#define __NR_setuid32 213
-#define __NR_setgid32 214
-#define __NR_setfsuid32 215
-#define __NR_setfsgid32 216
-#define __NR_pivot_root 217
-/* 218*/
-/* 219*/
-#define __NR_getdents64 220
-#define __NR_gettid 221
-#define __NR_tkill 222
-#define __NR_setxattr 223
-#define __NR_lsetxattr 224
-#define __NR_fsetxattr 225
-#define __NR_getxattr 226
-#define __NR_lgetxattr 227
-#define __NR_fgetxattr 228
-#define __NR_listxattr 229
-#define __NR_llistxattr 230
-#define __NR_flistxattr 231
-#define __NR_removexattr 232
-#define __NR_lremovexattr 233
-#define __NR_fremovexattr 234
-#define __NR_futex 235
-#define __NR_sendfile64 236
-#define __NR_mincore 237
-#define __NR_madvise 238
-#define __NR_fcntl64 239
-#define __NR_readahead 240
-#define __NR_io_setup 241
-#define __NR_io_destroy 242
-#define __NR_io_getevents 243
-#define __NR_io_submit 244
-#define __NR_io_cancel 245
-#define __NR_fadvise64 246
-#define __NR_exit_group 247
-#define __NR_lookup_dcookie 248
-#define __NR_epoll_create 249
-#define __NR_epoll_ctl 250
-#define __NR_epoll_wait 251
-#define __NR_remap_file_pages 252
-#define __NR_set_tid_address 253
-#define __NR_timer_create 254
-#define __NR_timer_settime 255
-#define __NR_timer_gettime 256
-#define __NR_timer_getoverrun 257
-#define __NR_timer_delete 258
-#define __NR_clock_settime 259
-#define __NR_clock_gettime 260
-#define __NR_clock_getres 261
-#define __NR_clock_nanosleep 262
-#define __NR_statfs64 263
-#define __NR_fstatfs64 264
-#define __NR_tgkill 265
-#define __NR_utimes 266
-#define __NR_fadvise64_64 267
-#define __NR_mbind 268
-#define __NR_get_mempolicy 269
-#define __NR_set_mempolicy 270
-#define __NR_mq_open 271
-#define __NR_mq_unlink 272
-#define __NR_mq_timedsend 273
-#define __NR_mq_timedreceive 274
-#define __NR_mq_notify 275
-#define __NR_mq_getsetattr 276
-#define __NR_waitid 277
-/*#define __NR_vserver 278*/
-#define __NR_add_key 279
-#define __NR_request_key 280
-#define __NR_keyctl 281
-#define __NR_ioprio_set 282
-#define __NR_ioprio_get 283
-#define __NR_inotify_init 284
-#define __NR_inotify_add_watch 285
-#define __NR_inotify_rm_watch 286
-#define __NR_migrate_pages 287
-#define __NR_openat 288
-#define __NR_mkdirat 289
-#define __NR_mknodat 290
-#define __NR_fchownat 291
-#define __NR_futimesat 292
-#define __NR_fstatat64 293
-#define __NR_unlinkat 294
-#define __NR_renameat 295
-#define __NR_linkat 296
-#define __NR_symlinkat 297
-#define __NR_readlinkat 298
-#define __NR_fchmodat 299
-#define __NR_faccessat 300
-#define __NR_pselect6 301
-#define __NR_ppoll 302
-#define __NR_unshare 303
-#define __NR_set_robust_list 304
-#define __NR_get_robust_list 305
-#define __NR_splice 306
-#define __NR_sync_file_range 307
-#define __NR_tee 308
-#define __NR_vmsplice 309
-#define __NR_move_pages 310
-#define __NR_sched_setaffinity 311
-#define __NR_sched_getaffinity 312
-#define __NR_kexec_load 313
-#define __NR_getcpu 314
-#define __NR_epoll_pwait 315
-#define __NR_utimensat 316
-#define __NR_signalfd 317
-#define __NR_timerfd_create 318
-#define __NR_eventfd 319
-#define __NR_fallocate 320
-#define __NR_timerfd_settime 321
-#define __NR_timerfd_gettime 322
-#define __NR_signalfd4 323
-#define __NR_eventfd2 324
-#define __NR_epoll_create1 325
-#define __NR_dup3 326
-#define __NR_pipe2 327
-#define __NR_inotify_init1 328
-#define __NR_preadv 329
-#define __NR_pwritev 330
-#define __NR_rt_tgsigqueueinfo 331
-#define __NR_perf_event_open 332
-#define __NR_get_thread_area 333
-#define __NR_set_thread_area 334
-#define __NR_atomic_cmpxchg_32 335
-#define __NR_atomic_barrier 336
-#define __NR_fanotify_init 337
-#define __NR_fanotify_mark 338
-#define __NR_prlimit64 339
-#define __NR_name_to_handle_at 340
-#define __NR_open_by_handle_at 341
-#define __NR_clock_adjtime 342
-#define __NR_syncfs 343
-#define __NR_setns 344
-#define __NR_process_vm_readv 345
-#define __NR_process_vm_writev 346
-#ifdef __KERNEL__
-
-#define NR_syscalls 347
+#define NR_syscalls 348
#define __ARCH_WANT_OLD_READDIR
#define __ARCH_WANT_OLD_STAT
@@ -393,5 +42,4 @@
*/
#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
-#endif /* __KERNEL__ */
#endif /* _ASM_M68K_UNISTD_H_ */
diff --git a/arch/m68k/include/uapi/asm/Kbuild b/arch/m68k/include/uapi/asm/Kbuild
index baebb3d..972bce1 100644
--- a/arch/m68k/include/uapi/asm/Kbuild
+++ b/arch/m68k/include/uapi/asm/Kbuild
@@ -1,3 +1,26 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
+header-y += a.out.h
+header-y += auxvec.h
+header-y += byteorder.h
+header-y += cachectl.h
+header-y += fcntl.h
+header-y += ioctls.h
+header-y += msgbuf.h
+header-y += param.h
+header-y += poll.h
+header-y += posix_types.h
+header-y += ptrace.h
+header-y += sembuf.h
+header-y += setup.h
+header-y += shmbuf.h
+header-y += sigcontext.h
+header-y += signal.h
+header-y += socket.h
+header-y += sockios.h
+header-y += stat.h
+header-y += swab.h
+header-y += termbits.h
+header-y += termios.h
+header-y += unistd.h
diff --git a/arch/m68k/include/asm/a.out.h b/arch/m68k/include/uapi/asm/a.out.h
similarity index 100%
rename from arch/m68k/include/asm/a.out.h
rename to arch/m68k/include/uapi/asm/a.out.h
diff --git a/arch/m68k/include/asm/auxvec.h b/arch/m68k/include/uapi/asm/auxvec.h
similarity index 100%
rename from arch/m68k/include/asm/auxvec.h
rename to arch/m68k/include/uapi/asm/auxvec.h
diff --git a/arch/m68k/include/asm/byteorder.h b/arch/m68k/include/uapi/asm/byteorder.h
similarity index 100%
rename from arch/m68k/include/asm/byteorder.h
rename to arch/m68k/include/uapi/asm/byteorder.h
diff --git a/arch/m68k/include/asm/cachectl.h b/arch/m68k/include/uapi/asm/cachectl.h
similarity index 100%
rename from arch/m68k/include/asm/cachectl.h
rename to arch/m68k/include/uapi/asm/cachectl.h
diff --git a/arch/m68k/include/asm/fcntl.h b/arch/m68k/include/uapi/asm/fcntl.h
similarity index 100%
rename from arch/m68k/include/asm/fcntl.h
rename to arch/m68k/include/uapi/asm/fcntl.h
diff --git a/arch/m68k/include/asm/ioctls.h b/arch/m68k/include/uapi/asm/ioctls.h
similarity index 100%
rename from arch/m68k/include/asm/ioctls.h
rename to arch/m68k/include/uapi/asm/ioctls.h
diff --git a/arch/m68k/include/asm/msgbuf.h b/arch/m68k/include/uapi/asm/msgbuf.h
similarity index 100%
rename from arch/m68k/include/asm/msgbuf.h
rename to arch/m68k/include/uapi/asm/msgbuf.h
diff --git a/arch/m68k/include/asm/param.h b/arch/m68k/include/uapi/asm/param.h
similarity index 100%
rename from arch/m68k/include/asm/param.h
rename to arch/m68k/include/uapi/asm/param.h
diff --git a/arch/m68k/include/asm/poll.h b/arch/m68k/include/uapi/asm/poll.h
similarity index 100%
rename from arch/m68k/include/asm/poll.h
rename to arch/m68k/include/uapi/asm/poll.h
diff --git a/arch/m68k/include/asm/posix_types.h b/arch/m68k/include/uapi/asm/posix_types.h
similarity index 100%
rename from arch/m68k/include/asm/posix_types.h
rename to arch/m68k/include/uapi/asm/posix_types.h
diff --git a/arch/m68k/include/uapi/asm/ptrace.h b/arch/m68k/include/uapi/asm/ptrace.h
new file mode 100644
index 0000000..caf92fd
--- /dev/null
+++ b/arch/m68k/include/uapi/asm/ptrace.h
@@ -0,0 +1,79 @@
+#ifndef _UAPI_M68K_PTRACE_H
+#define _UAPI_M68K_PTRACE_H
+
+#define PT_D1 0
+#define PT_D2 1
+#define PT_D3 2
+#define PT_D4 3
+#define PT_D5 4
+#define PT_D6 5
+#define PT_D7 6
+#define PT_A0 7
+#define PT_A1 8
+#define PT_A2 9
+#define PT_A3 10
+#define PT_A4 11
+#define PT_A5 12
+#define PT_A6 13
+#define PT_D0 14
+#define PT_USP 15
+#define PT_ORIG_D0 16
+#define PT_SR 17
+#define PT_PC 18
+
+#ifndef __ASSEMBLY__
+
+/* this struct defines the way the registers are stored on the
+ stack during a system call. */
+
+struct pt_regs {
+ long d1;
+ long d2;
+ long d3;
+ long d4;
+ long d5;
+ long a0;
+ long a1;
+ long a2;
+ long d0;
+ long orig_d0;
+ long stkadj;
+#ifdef CONFIG_COLDFIRE
+ unsigned format : 4; /* frame format specifier */
+ unsigned vector : 12; /* vector offset */
+ unsigned short sr;
+ unsigned long pc;
+#else
+ unsigned short sr;
+ unsigned long pc;
+ unsigned format : 4; /* frame format specifier */
+ unsigned vector : 12; /* vector offset */
+#endif
+};
+
+/*
+ * This is the extended stack used by signal handlers and the context
+ * switcher: it's pushed after the normal "struct pt_regs".
+ */
+struct switch_stack {
+ unsigned long d6;
+ unsigned long d7;
+ unsigned long a3;
+ unsigned long a4;
+ unsigned long a5;
+ unsigned long a6;
+ unsigned long retpc;
+};
+
+/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
+#define PTRACE_GETREGS 12
+#define PTRACE_SETREGS 13
+#define PTRACE_GETFPREGS 14
+#define PTRACE_SETFPREGS 15
+
+#define PTRACE_GET_THREAD_AREA 25
+
+#define PTRACE_SINGLEBLOCK 33 /* resume execution until next branch */
+
+#endif /* __ASSEMBLY__ */
+#endif /* _UAPI_M68K_PTRACE_H */
diff --git a/arch/m68k/include/asm/sembuf.h b/arch/m68k/include/uapi/asm/sembuf.h
similarity index 100%
rename from arch/m68k/include/asm/sembuf.h
rename to arch/m68k/include/uapi/asm/sembuf.h
diff --git a/arch/m68k/include/uapi/asm/setup.h b/arch/m68k/include/uapi/asm/setup.h
new file mode 100644
index 0000000..85579bf
--- /dev/null
+++ b/arch/m68k/include/uapi/asm/setup.h
@@ -0,0 +1,103 @@
+/*
+** asm/setup.h -- Definition of the Linux/m68k setup information
+**
+** Copyright 1992 by Greg Harp
+**
+** This file is subject to the terms and conditions of the GNU General Public
+** License. See the file COPYING in the main directory of this archive
+** for more details.
+**
+** Created 09/29/92 by Greg Harp
+**
+** 5/2/94 Roman Hodek:
+** Added bi_atari part of the machine dependent union bi_un; for now it
+** contains just a model field to distinguish between TT and Falcon.
+** 26/7/96 Roman Zippel:
+** Renamed to setup.h; added some useful macros to allow gcc some
+** optimizations if possible.
+** 5/10/96 Geert Uytterhoeven:
+** Redesign of the boot information structure; moved boot information
+** structure to bootinfo.h
+*/
+
+#ifndef _UAPI_M68K_SETUP_H
+#define _UAPI_M68K_SETUP_H
+
+
+
+ /*
+ * Linux/m68k Architectures
+ */
+
+#define MACH_AMIGA 1
+#define MACH_ATARI 2
+#define MACH_MAC 3
+#define MACH_APOLLO 4
+#define MACH_SUN3 5
+#define MACH_MVME147 6
+#define MACH_MVME16x 7
+#define MACH_BVME6000 8
+#define MACH_HP300 9
+#define MACH_Q40 10
+#define MACH_SUN3X 11
+#define MACH_M54XX 12
+
+#define COMMAND_LINE_SIZE 256
+
+
+
+ /*
+ * CPU, FPU and MMU types
+ *
+ * Note: we may rely on the following equalities:
+ *
+ * CPU_68020 == MMU_68851
+ * CPU_68030 == MMU_68030
+ * CPU_68040 == FPU_68040 == MMU_68040
+ * CPU_68060 == FPU_68060 == MMU_68060
+ */
+
+#define CPUB_68020 0
+#define CPUB_68030 1
+#define CPUB_68040 2
+#define CPUB_68060 3
+#define CPUB_COLDFIRE 4
+
+#define CPU_68020 (1<<CPUB_68020)
+#define CPU_68030 (1<<CPUB_68030)
+#define CPU_68040 (1<<CPUB_68040)
+#define CPU_68060 (1<<CPUB_68060)
+#define CPU_COLDFIRE (1<<CPUB_COLDFIRE)
+
+#define FPUB_68881 0
+#define FPUB_68882 1
+#define FPUB_68040 2 /* Internal FPU */
+#define FPUB_68060 3 /* Internal FPU */
+#define FPUB_SUNFPA 4 /* Sun-3 FPA */
+#define FPUB_COLDFIRE 5 /* ColdFire FPU */
+
+#define FPU_68881 (1<<FPUB_68881)
+#define FPU_68882 (1<<FPUB_68882)
+#define FPU_68040 (1<<FPUB_68040)
+#define FPU_68060 (1<<FPUB_68060)
+#define FPU_SUNFPA (1<<FPUB_SUNFPA)
+#define FPU_COLDFIRE (1<<FPUB_COLDFIRE)
+
+#define MMUB_68851 0
+#define MMUB_68030 1 /* Internal MMU */
+#define MMUB_68040 2 /* Internal MMU */
+#define MMUB_68060 3 /* Internal MMU */
+#define MMUB_APOLLO 4 /* Custom Apollo */
+#define MMUB_SUN3 5 /* Custom Sun-3 */
+#define MMUB_COLDFIRE 6 /* Internal MMU */
+
+#define MMU_68851 (1<<MMUB_68851)
+#define MMU_68030 (1<<MMUB_68030)
+#define MMU_68040 (1<<MMUB_68040)
+#define MMU_68060 (1<<MMUB_68060)
+#define MMU_SUN3 (1<<MMUB_SUN3)
+#define MMU_APOLLO (1<<MMUB_APOLLO)
+#define MMU_COLDFIRE (1<<MMUB_COLDFIRE)
+
+
+#endif /* _UAPI_M68K_SETUP_H */
diff --git a/arch/m68k/include/asm/shmbuf.h b/arch/m68k/include/uapi/asm/shmbuf.h
similarity index 100%
rename from arch/m68k/include/asm/shmbuf.h
rename to arch/m68k/include/uapi/asm/shmbuf.h
diff --git a/arch/m68k/include/asm/sigcontext.h b/arch/m68k/include/uapi/asm/sigcontext.h
similarity index 100%
rename from arch/m68k/include/asm/sigcontext.h
rename to arch/m68k/include/uapi/asm/sigcontext.h
diff --git a/arch/m68k/include/uapi/asm/signal.h b/arch/m68k/include/uapi/asm/signal.h
new file mode 100644
index 0000000..2b450f3
--- /dev/null
+++ b/arch/m68k/include/uapi/asm/signal.h
@@ -0,0 +1,118 @@
+#ifndef _UAPI_M68K_SIGNAL_H
+#define _UAPI_M68K_SIGNAL_H
+
+#include <linux/types.h>
+
+/* Avoid too many header ordering problems. */
+struct siginfo;
+
+#ifndef __KERNEL__
+/* Here we must cater to libcs that poke about in kernel headers. */
+
+#define NSIG 32
+typedef unsigned long sigset_t;
+
+#endif /* __KERNEL__ */
+
+#define SIGHUP 1
+#define SIGINT 2
+#define SIGQUIT 3
+#define SIGILL 4
+#define SIGTRAP 5
+#define SIGABRT 6
+#define SIGIOT 6
+#define SIGBUS 7
+#define SIGFPE 8
+#define SIGKILL 9
+#define SIGUSR1 10
+#define SIGSEGV 11
+#define SIGUSR2 12
+#define SIGPIPE 13
+#define SIGALRM 14
+#define SIGTERM 15
+#define SIGSTKFLT 16
+#define SIGCHLD 17
+#define SIGCONT 18
+#define SIGSTOP 19
+#define SIGTSTP 20
+#define SIGTTIN 21
+#define SIGTTOU 22
+#define SIGURG 23
+#define SIGXCPU 24
+#define SIGXFSZ 25
+#define SIGVTALRM 26
+#define SIGPROF 27
+#define SIGWINCH 28
+#define SIGIO 29
+#define SIGPOLL SIGIO
+/*
+#define SIGLOST 29
+*/
+#define SIGPWR 30
+#define SIGSYS 31
+#define SIGUNUSED 31
+
+/* These should not be considered constants from userland. */
+#define SIGRTMIN 32
+#define SIGRTMAX _NSIG
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_ONSTACK indicates that a registered stack_t will be used.
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
+ * SA_RESETHAND clears the handler when the signal is delivered.
+ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
+ * SA_NODEFER prevents the current signal from being masked in the handler.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_NOCLDSTOP 0x00000001
+#define SA_NOCLDWAIT 0x00000002
+#define SA_SIGINFO 0x00000004
+#define SA_ONSTACK 0x08000000
+#define SA_RESTART 0x10000000
+#define SA_NODEFER 0x40000000
+#define SA_RESETHAND 0x80000000
+
+#define SA_NOMASK SA_NODEFER
+#define SA_ONESHOT SA_RESETHAND
+
+/*
+ * sigaltstack controls
+ */
+#define SS_ONSTACK 1
+#define SS_DISABLE 2
+
+#define MINSIGSTKSZ 2048
+#define SIGSTKSZ 8192
+
+#include <asm-generic/signal-defs.h>
+
+#ifndef __KERNEL__
+/* Here we must cater to libcs that poke about in kernel headers. */
+
+struct sigaction {
+ union {
+ __sighandler_t _sa_handler;
+ void (*_sa_sigaction)(int, struct siginfo *, void *);
+ } _u;
+ sigset_t sa_mask;
+ unsigned long sa_flags;
+ void (*sa_restorer)(void);
+};
+
+#define sa_handler _u._sa_handler
+#define sa_sigaction _u._sa_sigaction
+
+#endif /* __KERNEL__ */
+
+typedef struct sigaltstack {
+ void __user *ss_sp;
+ int ss_flags;
+ size_t ss_size;
+} stack_t;
+
+#endif /* _UAPI_M68K_SIGNAL_H */
diff --git a/arch/m68k/include/asm/socket.h b/arch/m68k/include/uapi/asm/socket.h
similarity index 100%
rename from arch/m68k/include/asm/socket.h
rename to arch/m68k/include/uapi/asm/socket.h
diff --git a/arch/m68k/include/asm/sockios.h b/arch/m68k/include/uapi/asm/sockios.h
similarity index 100%
rename from arch/m68k/include/asm/sockios.h
rename to arch/m68k/include/uapi/asm/sockios.h
diff --git a/arch/m68k/include/asm/stat.h b/arch/m68k/include/uapi/asm/stat.h
similarity index 100%
rename from arch/m68k/include/asm/stat.h
rename to arch/m68k/include/uapi/asm/stat.h
diff --git a/arch/m68k/include/asm/swab.h b/arch/m68k/include/uapi/asm/swab.h
similarity index 100%
rename from arch/m68k/include/asm/swab.h
rename to arch/m68k/include/uapi/asm/swab.h
diff --git a/arch/m68k/include/asm/termbits.h b/arch/m68k/include/uapi/asm/termbits.h
similarity index 100%
rename from arch/m68k/include/asm/termbits.h
rename to arch/m68k/include/uapi/asm/termbits.h
diff --git a/arch/m68k/include/uapi/asm/termios.h b/arch/m68k/include/uapi/asm/termios.h
new file mode 100644
index 0000000..ce2142c9
--- /dev/null
+++ b/arch/m68k/include/uapi/asm/termios.h
@@ -0,0 +1,44 @@
+#ifndef _UAPI_M68K_TERMIOS_H
+#define _UAPI_M68K_TERMIOS_H
+
+#include <asm/termbits.h>
+#include <asm/ioctls.h>
+
+struct winsize {
+ unsigned short ws_row;
+ unsigned short ws_col;
+ unsigned short ws_xpixel;
+ unsigned short ws_ypixel;
+};
+
+#define NCC 8
+struct termio {
+ unsigned short c_iflag; /* input mode flags */
+ unsigned short c_oflag; /* output mode flags */
+ unsigned short c_cflag; /* control mode flags */
+ unsigned short c_lflag; /* local mode flags */
+ unsigned char c_line; /* line discipline */
+ unsigned char c_cc[NCC]; /* control characters */
+};
+
+
+/* modem lines */
+#define TIOCM_LE 0x001
+#define TIOCM_DTR 0x002
+#define TIOCM_RTS 0x004
+#define TIOCM_ST 0x008
+#define TIOCM_SR 0x010
+#define TIOCM_CTS 0x020
+#define TIOCM_CAR 0x040
+#define TIOCM_RNG 0x080
+#define TIOCM_DSR 0x100
+#define TIOCM_CD TIOCM_CAR
+#define TIOCM_RI TIOCM_RNG
+#define TIOCM_OUT1 0x2000
+#define TIOCM_OUT2 0x4000
+#define TIOCM_LOOP 0x8000
+
+/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+
+
+#endif /* _UAPI_M68K_TERMIOS_H */
diff --git a/arch/m68k/include/uapi/asm/unistd.h b/arch/m68k/include/uapi/asm/unistd.h
new file mode 100644
index 0000000..b94bfbf
--- /dev/null
+++ b/arch/m68k/include/uapi/asm/unistd.h
@@ -0,0 +1,357 @@
+#ifndef _UAPI_ASM_M68K_UNISTD_H_
+#define _UAPI_ASM_M68K_UNISTD_H_
+
+/*
+ * This file contains the system call numbers.
+ */
+
+#define __NR_restart_syscall 0
+#define __NR_exit 1
+#define __NR_fork 2
+#define __NR_read 3
+#define __NR_write 4
+#define __NR_open 5
+#define __NR_close 6
+#define __NR_waitpid 7
+#define __NR_creat 8
+#define __NR_link 9
+#define __NR_unlink 10
+#define __NR_execve 11
+#define __NR_chdir 12
+#define __NR_time 13
+#define __NR_mknod 14
+#define __NR_chmod 15
+#define __NR_chown 16
+/*#define __NR_break 17*/
+#define __NR_oldstat 18
+#define __NR_lseek 19
+#define __NR_getpid 20
+#define __NR_mount 21
+#define __NR_umount 22
+#define __NR_setuid 23
+#define __NR_getuid 24
+#define __NR_stime 25
+#define __NR_ptrace 26
+#define __NR_alarm 27
+#define __NR_oldfstat 28
+#define __NR_pause 29
+#define __NR_utime 30
+/*#define __NR_stty 31*/
+/*#define __NR_gtty 32*/
+#define __NR_access 33
+#define __NR_nice 34
+/*#define __NR_ftime 35*/
+#define __NR_sync 36
+#define __NR_kill 37
+#define __NR_rename 38
+#define __NR_mkdir 39
+#define __NR_rmdir 40
+#define __NR_dup 41
+#define __NR_pipe 42
+#define __NR_times 43
+/*#define __NR_prof 44*/
+#define __NR_brk 45
+#define __NR_setgid 46
+#define __NR_getgid 47
+#define __NR_signal 48
+#define __NR_geteuid 49
+#define __NR_getegid 50
+#define __NR_acct 51
+#define __NR_umount2 52
+/*#define __NR_lock 53*/
+#define __NR_ioctl 54
+#define __NR_fcntl 55
+/*#define __NR_mpx 56*/
+#define __NR_setpgid 57
+/*#define __NR_ulimit 58*/
+/*#define __NR_oldolduname 59*/
+#define __NR_umask 60
+#define __NR_chroot 61
+#define __NR_ustat 62
+#define __NR_dup2 63
+#define __NR_getppid 64
+#define __NR_getpgrp 65
+#define __NR_setsid 66
+#define __NR_sigaction 67
+#define __NR_sgetmask 68
+#define __NR_ssetmask 69
+#define __NR_setreuid 70
+#define __NR_setregid 71
+#define __NR_sigsuspend 72
+#define __NR_sigpending 73
+#define __NR_sethostname 74
+#define __NR_setrlimit 75
+#define __NR_getrlimit 76
+#define __NR_getrusage 77
+#define __NR_gettimeofday 78
+#define __NR_settimeofday 79
+#define __NR_getgroups 80
+#define __NR_setgroups 81
+#define __NR_select 82
+#define __NR_symlink 83
+#define __NR_oldlstat 84
+#define __NR_readlink 85
+#define __NR_uselib 86
+#define __NR_swapon 87
+#define __NR_reboot 88
+#define __NR_readdir 89
+#define __NR_mmap 90
+#define __NR_munmap 91
+#define __NR_truncate 92
+#define __NR_ftruncate 93
+#define __NR_fchmod 94
+#define __NR_fchown 95
+#define __NR_getpriority 96
+#define __NR_setpriority 97
+/*#define __NR_profil 98*/
+#define __NR_statfs 99
+#define __NR_fstatfs 100
+/*#define __NR_ioperm 101*/
+#define __NR_socketcall 102
+#define __NR_syslog 103
+#define __NR_setitimer 104
+#define __NR_getitimer 105
+#define __NR_stat 106
+#define __NR_lstat 107
+#define __NR_fstat 108
+/*#define __NR_olduname 109*/
+/*#define __NR_iopl 110*/ /* not supported */
+#define __NR_vhangup 111
+/*#define __NR_idle 112*/ /* Obsolete */
+/*#define __NR_vm86 113*/ /* not supported */
+#define __NR_wait4 114
+#define __NR_swapoff 115
+#define __NR_sysinfo 116
+#define __NR_ipc 117
+#define __NR_fsync 118
+#define __NR_sigreturn 119
+#define __NR_clone 120
+#define __NR_setdomainname 121
+#define __NR_uname 122
+#define __NR_cacheflush 123
+#define __NR_adjtimex 124
+#define __NR_mprotect 125
+#define __NR_sigprocmask 126
+#define __NR_create_module 127
+#define __NR_init_module 128
+#define __NR_delete_module 129
+#define __NR_get_kernel_syms 130
+#define __NR_quotactl 131
+#define __NR_getpgid 132
+#define __NR_fchdir 133
+#define __NR_bdflush 134
+#define __NR_sysfs 135
+#define __NR_personality 136
+/*#define __NR_afs_syscall 137*/ /* Syscall for Andrew File System */
+#define __NR_setfsuid 138
+#define __NR_setfsgid 139
+#define __NR__llseek 140
+#define __NR_getdents 141
+#define __NR__newselect 142
+#define __NR_flock 143
+#define __NR_msync 144
+#define __NR_readv 145
+#define __NR_writev 146
+#define __NR_getsid 147
+#define __NR_fdatasync 148
+#define __NR__sysctl 149
+#define __NR_mlock 150
+#define __NR_munlock 151
+#define __NR_mlockall 152
+#define __NR_munlockall 153
+#define __NR_sched_setparam 154
+#define __NR_sched_getparam 155
+#define __NR_sched_setscheduler 156
+#define __NR_sched_getscheduler 157
+#define __NR_sched_yield 158
+#define __NR_sched_get_priority_max 159
+#define __NR_sched_get_priority_min 160
+#define __NR_sched_rr_get_interval 161
+#define __NR_nanosleep 162
+#define __NR_mremap 163
+#define __NR_setresuid 164
+#define __NR_getresuid 165
+#define __NR_getpagesize 166
+#define __NR_query_module 167
+#define __NR_poll 168
+#define __NR_nfsservctl 169
+#define __NR_setresgid 170
+#define __NR_getresgid 171
+#define __NR_prctl 172
+#define __NR_rt_sigreturn 173
+#define __NR_rt_sigaction 174
+#define __NR_rt_sigprocmask 175
+#define __NR_rt_sigpending 176
+#define __NR_rt_sigtimedwait 177
+#define __NR_rt_sigqueueinfo 178
+#define __NR_rt_sigsuspend 179
+#define __NR_pread64 180
+#define __NR_pwrite64 181
+#define __NR_lchown 182
+#define __NR_getcwd 183
+#define __NR_capget 184
+#define __NR_capset 185
+#define __NR_sigaltstack 186
+#define __NR_sendfile 187
+#define __NR_getpmsg 188 /* some people actually want streams */
+#define __NR_putpmsg 189 /* some people actually want streams */
+#define __NR_vfork 190
+#define __NR_ugetrlimit 191
+#define __NR_mmap2 192
+#define __NR_truncate64 193
+#define __NR_ftruncate64 194
+#define __NR_stat64 195
+#define __NR_lstat64 196
+#define __NR_fstat64 197
+#define __NR_chown32 198
+#define __NR_getuid32 199
+#define __NR_getgid32 200
+#define __NR_geteuid32 201
+#define __NR_getegid32 202
+#define __NR_setreuid32 203
+#define __NR_setregid32 204
+#define __NR_getgroups32 205
+#define __NR_setgroups32 206
+#define __NR_fchown32 207
+#define __NR_setresuid32 208
+#define __NR_getresuid32 209
+#define __NR_setresgid32 210
+#define __NR_getresgid32 211
+#define __NR_lchown32 212
+#define __NR_setuid32 213
+#define __NR_setgid32 214
+#define __NR_setfsuid32 215
+#define __NR_setfsgid32 216
+#define __NR_pivot_root 217
+/* 218*/
+/* 219*/
+#define __NR_getdents64 220
+#define __NR_gettid 221
+#define __NR_tkill 222
+#define __NR_setxattr 223
+#define __NR_lsetxattr 224
+#define __NR_fsetxattr 225
+#define __NR_getxattr 226
+#define __NR_lgetxattr 227
+#define __NR_fgetxattr 228
+#define __NR_listxattr 229
+#define __NR_llistxattr 230
+#define __NR_flistxattr 231
+#define __NR_removexattr 232
+#define __NR_lremovexattr 233
+#define __NR_fremovexattr 234
+#define __NR_futex 235
+#define __NR_sendfile64 236
+#define __NR_mincore 237
+#define __NR_madvise 238
+#define __NR_fcntl64 239
+#define __NR_readahead 240
+#define __NR_io_setup 241
+#define __NR_io_destroy 242
+#define __NR_io_getevents 243
+#define __NR_io_submit 244
+#define __NR_io_cancel 245
+#define __NR_fadvise64 246
+#define __NR_exit_group 247
+#define __NR_lookup_dcookie 248
+#define __NR_epoll_create 249
+#define __NR_epoll_ctl 250
+#define __NR_epoll_wait 251
+#define __NR_remap_file_pages 252
+#define __NR_set_tid_address 253
+#define __NR_timer_create 254
+#define __NR_timer_settime 255
+#define __NR_timer_gettime 256
+#define __NR_timer_getoverrun 257
+#define __NR_timer_delete 258
+#define __NR_clock_settime 259
+#define __NR_clock_gettime 260
+#define __NR_clock_getres 261
+#define __NR_clock_nanosleep 262
+#define __NR_statfs64 263
+#define __NR_fstatfs64 264
+#define __NR_tgkill 265
+#define __NR_utimes 266
+#define __NR_fadvise64_64 267
+#define __NR_mbind 268
+#define __NR_get_mempolicy 269
+#define __NR_set_mempolicy 270
+#define __NR_mq_open 271
+#define __NR_mq_unlink 272
+#define __NR_mq_timedsend 273
+#define __NR_mq_timedreceive 274
+#define __NR_mq_notify 275
+#define __NR_mq_getsetattr 276
+#define __NR_waitid 277
+/*#define __NR_vserver 278*/
+#define __NR_add_key 279
+#define __NR_request_key 280
+#define __NR_keyctl 281
+#define __NR_ioprio_set 282
+#define __NR_ioprio_get 283
+#define __NR_inotify_init 284
+#define __NR_inotify_add_watch 285
+#define __NR_inotify_rm_watch 286
+#define __NR_migrate_pages 287
+#define __NR_openat 288
+#define __NR_mkdirat 289
+#define __NR_mknodat 290
+#define __NR_fchownat 291
+#define __NR_futimesat 292
+#define __NR_fstatat64 293
+#define __NR_unlinkat 294
+#define __NR_renameat 295
+#define __NR_linkat 296
+#define __NR_symlinkat 297
+#define __NR_readlinkat 298
+#define __NR_fchmodat 299
+#define __NR_faccessat 300
+#define __NR_pselect6 301
+#define __NR_ppoll 302
+#define __NR_unshare 303
+#define __NR_set_robust_list 304
+#define __NR_get_robust_list 305
+#define __NR_splice 306
+#define __NR_sync_file_range 307
+#define __NR_tee 308
+#define __NR_vmsplice 309
+#define __NR_move_pages 310
+#define __NR_sched_setaffinity 311
+#define __NR_sched_getaffinity 312
+#define __NR_kexec_load 313
+#define __NR_getcpu 314
+#define __NR_epoll_pwait 315
+#define __NR_utimensat 316
+#define __NR_signalfd 317
+#define __NR_timerfd_create 318
+#define __NR_eventfd 319
+#define __NR_fallocate 320
+#define __NR_timerfd_settime 321
+#define __NR_timerfd_gettime 322
+#define __NR_signalfd4 323
+#define __NR_eventfd2 324
+#define __NR_epoll_create1 325
+#define __NR_dup3 326
+#define __NR_pipe2 327
+#define __NR_inotify_init1 328
+#define __NR_preadv 329
+#define __NR_pwritev 330
+#define __NR_rt_tgsigqueueinfo 331
+#define __NR_perf_event_open 332
+#define __NR_get_thread_area 333
+#define __NR_set_thread_area 334
+#define __NR_atomic_cmpxchg_32 335
+#define __NR_atomic_barrier 336
+#define __NR_fanotify_init 337
+#define __NR_fanotify_mark 338
+#define __NR_prlimit64 339
+#define __NR_name_to_handle_at 340
+#define __NR_open_by_handle_at 341
+#define __NR_clock_adjtime 342
+#define __NR_syncfs 343
+#define __NR_setns 344
+#define __NR_process_vm_readv 345
+#define __NR_process_vm_writev 346
+#define __NR_kcmp 347
+
+#endif /* _UAPI_ASM_M68K_UNISTD_H_ */
diff --git a/arch/m68k/kernel/syscalltable.S b/arch/m68k/kernel/syscalltable.S
index ce827b37..4fc2e29 100644
--- a/arch/m68k/kernel/syscalltable.S
+++ b/arch/m68k/kernel/syscalltable.S
@@ -367,4 +367,5 @@
.long sys_setns
.long sys_process_vm_readv /* 345 */
.long sys_process_vm_writev
+ .long sys_kcmp
diff --git a/arch/mips/cavium-octeon/executive/cvmx-l2c.c b/arch/mips/cavium-octeon/executive/cvmx-l2c.c
index d38246e..9f883bf 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-l2c.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-l2c.c
@@ -30,6 +30,7 @@
* measurement, and debugging facilities.
*/
+#include <linux/irqflags.h>
#include <asm/octeon/cvmx.h>
#include <asm/octeon/cvmx-l2c.h>
#include <asm/octeon/cvmx-spinlock.h>
diff --git a/arch/mips/fw/arc/misc.c b/arch/mips/fw/arc/misc.c
index 7cf80ca..f9f5307 100644
--- a/arch/mips/fw/arc/misc.c
+++ b/arch/mips/fw/arc/misc.c
@@ -11,6 +11,7 @@
*/
#include <linux/init.h>
#include <linux/kernel.h>
+#include <linux/irqflags.h>
#include <asm/bcache.h>
diff --git a/arch/mips/include/asm/bitops.h b/arch/mips/include/asm/bitops.h
index 82ad35c..46ac73a 100644
--- a/arch/mips/include/asm/bitops.h
+++ b/arch/mips/include/asm/bitops.h
@@ -14,7 +14,6 @@
#endif
#include <linux/compiler.h>
-#include <linux/irqflags.h>
#include <linux/types.h>
#include <asm/barrier.h>
#include <asm/byteorder.h> /* sigh ... */
@@ -44,6 +43,24 @@
#define smp_mb__before_clear_bit() smp_mb__before_llsc()
#define smp_mb__after_clear_bit() smp_llsc_mb()
+
+/*
+ * These are the "slower" versions of the functions and are in bitops.c.
+ * These functions call raw_local_irq_{save,restore}().
+ */
+void __mips_set_bit(unsigned long nr, volatile unsigned long *addr);
+void __mips_clear_bit(unsigned long nr, volatile unsigned long *addr);
+void __mips_change_bit(unsigned long nr, volatile unsigned long *addr);
+int __mips_test_and_set_bit(unsigned long nr,
+ volatile unsigned long *addr);
+int __mips_test_and_set_bit_lock(unsigned long nr,
+ volatile unsigned long *addr);
+int __mips_test_and_clear_bit(unsigned long nr,
+ volatile unsigned long *addr);
+int __mips_test_and_change_bit(unsigned long nr,
+ volatile unsigned long *addr);
+
+
/*
* set_bit - Atomically set a bit in memory
* @nr: the bit to set
@@ -57,7 +74,7 @@
static inline void set_bit(unsigned long nr, volatile unsigned long *addr)
{
unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
- unsigned short bit = nr & SZLONG_MASK;
+ int bit = nr & SZLONG_MASK;
unsigned long temp;
if (kernel_uses_llsc && R10000_LLSC_WAR) {
@@ -92,17 +109,8 @@
: "=&r" (temp), "+m" (*m)
: "ir" (1UL << bit));
} while (unlikely(!temp));
- } else {
- volatile unsigned long *a = addr;
- unsigned long mask;
- unsigned long flags;
-
- a += nr >> SZLONG_LOG;
- mask = 1UL << bit;
- raw_local_irq_save(flags);
- *a |= mask;
- raw_local_irq_restore(flags);
- }
+ } else
+ __mips_set_bit(nr, addr);
}
/*
@@ -118,7 +126,7 @@
static inline void clear_bit(unsigned long nr, volatile unsigned long *addr)
{
unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
- unsigned short bit = nr & SZLONG_MASK;
+ int bit = nr & SZLONG_MASK;
unsigned long temp;
if (kernel_uses_llsc && R10000_LLSC_WAR) {
@@ -153,17 +161,8 @@
: "=&r" (temp), "+m" (*m)
: "ir" (~(1UL << bit)));
} while (unlikely(!temp));
- } else {
- volatile unsigned long *a = addr;
- unsigned long mask;
- unsigned long flags;
-
- a += nr >> SZLONG_LOG;
- mask = 1UL << bit;
- raw_local_irq_save(flags);
- *a &= ~mask;
- raw_local_irq_restore(flags);
- }
+ } else
+ __mips_clear_bit(nr, addr);
}
/*
@@ -191,7 +190,7 @@
*/
static inline void change_bit(unsigned long nr, volatile unsigned long *addr)
{
- unsigned short bit = nr & SZLONG_MASK;
+ int bit = nr & SZLONG_MASK;
if (kernel_uses_llsc && R10000_LLSC_WAR) {
unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
@@ -220,17 +219,8 @@
: "=&r" (temp), "+m" (*m)
: "ir" (1UL << bit));
} while (unlikely(!temp));
- } else {
- volatile unsigned long *a = addr;
- unsigned long mask;
- unsigned long flags;
-
- a += nr >> SZLONG_LOG;
- mask = 1UL << bit;
- raw_local_irq_save(flags);
- *a ^= mask;
- raw_local_irq_restore(flags);
- }
+ } else
+ __mips_change_bit(nr, addr);
}
/*
@@ -244,7 +234,7 @@
static inline int test_and_set_bit(unsigned long nr,
volatile unsigned long *addr)
{
- unsigned short bit = nr & SZLONG_MASK;
+ int bit = nr & SZLONG_MASK;
unsigned long res;
smp_mb__before_llsc();
@@ -281,18 +271,8 @@
} while (unlikely(!res));
res = temp & (1UL << bit);
- } else {
- volatile unsigned long *a = addr;
- unsigned long mask;
- unsigned long flags;
-
- a += nr >> SZLONG_LOG;
- mask = 1UL << bit;
- raw_local_irq_save(flags);
- res = (mask & *a);
- *a |= mask;
- raw_local_irq_restore(flags);
- }
+ } else
+ res = __mips_test_and_set_bit(nr, addr);
smp_llsc_mb();
@@ -310,7 +290,7 @@
static inline int test_and_set_bit_lock(unsigned long nr,
volatile unsigned long *addr)
{
- unsigned short bit = nr & SZLONG_MASK;
+ int bit = nr & SZLONG_MASK;
unsigned long res;
if (kernel_uses_llsc && R10000_LLSC_WAR) {
@@ -345,18 +325,8 @@
} while (unlikely(!res));
res = temp & (1UL << bit);
- } else {
- volatile unsigned long *a = addr;
- unsigned long mask;
- unsigned long flags;
-
- a += nr >> SZLONG_LOG;
- mask = 1UL << bit;
- raw_local_irq_save(flags);
- res = (mask & *a);
- *a |= mask;
- raw_local_irq_restore(flags);
- }
+ } else
+ res = __mips_test_and_set_bit_lock(nr, addr);
smp_llsc_mb();
@@ -373,7 +343,7 @@
static inline int test_and_clear_bit(unsigned long nr,
volatile unsigned long *addr)
{
- unsigned short bit = nr & SZLONG_MASK;
+ int bit = nr & SZLONG_MASK;
unsigned long res;
smp_mb__before_llsc();
@@ -428,18 +398,8 @@
} while (unlikely(!res));
res = temp & (1UL << bit);
- } else {
- volatile unsigned long *a = addr;
- unsigned long mask;
- unsigned long flags;
-
- a += nr >> SZLONG_LOG;
- mask = 1UL << bit;
- raw_local_irq_save(flags);
- res = (mask & *a);
- *a &= ~mask;
- raw_local_irq_restore(flags);
- }
+ } else
+ res = __mips_test_and_clear_bit(nr, addr);
smp_llsc_mb();
@@ -457,7 +417,7 @@
static inline int test_and_change_bit(unsigned long nr,
volatile unsigned long *addr)
{
- unsigned short bit = nr & SZLONG_MASK;
+ int bit = nr & SZLONG_MASK;
unsigned long res;
smp_mb__before_llsc();
@@ -494,18 +454,8 @@
} while (unlikely(!res));
res = temp & (1UL << bit);
- } else {
- volatile unsigned long *a = addr;
- unsigned long mask;
- unsigned long flags;
-
- a += nr >> SZLONG_LOG;
- mask = 1UL << bit;
- raw_local_irq_save(flags);
- res = (mask & *a);
- *a ^= mask;
- raw_local_irq_restore(flags);
- }
+ } else
+ res = __mips_test_and_change_bit(nr, addr);
smp_llsc_mb();
diff --git a/arch/mips/include/asm/compat.h b/arch/mips/include/asm/compat.h
index 58277e0..3c5d1464b 100644
--- a/arch/mips/include/asm/compat.h
+++ b/arch/mips/include/asm/compat.h
@@ -290,7 +290,7 @@
static inline int is_compat_task(void)
{
- return test_thread_flag(TIF_32BIT);
+ return test_thread_flag(TIF_32BIT_ADDR);
}
#endif /* _ASM_COMPAT_H */
diff --git a/arch/mips/include/asm/io.h b/arch/mips/include/asm/io.h
index 29d9c23..ff2e034 100644
--- a/arch/mips/include/asm/io.h
+++ b/arch/mips/include/asm/io.h
@@ -15,6 +15,7 @@
#include <linux/compiler.h>
#include <linux/kernel.h>
#include <linux/types.h>
+#include <linux/irqflags.h>
#include <asm/addrspace.h>
#include <asm/bug.h>
diff --git a/arch/mips/include/asm/irqflags.h b/arch/mips/include/asm/irqflags.h
index 309cbcd..9f3384c 100644
--- a/arch/mips/include/asm/irqflags.h
+++ b/arch/mips/include/asm/irqflags.h
@@ -16,6 +16,105 @@
#include <linux/compiler.h>
#include <asm/hazards.h>
+#if defined(CONFIG_CPU_MIPSR2) && !defined(CONFIG_MIPS_MT_SMTC)
+
+__asm__(
+ " .macro arch_local_irq_disable\n"
+ " .set push \n"
+ " .set noat \n"
+ " di \n"
+ " irq_disable_hazard \n"
+ " .set pop \n"
+ " .endm \n");
+
+static inline void arch_local_irq_disable(void)
+{
+ __asm__ __volatile__(
+ "arch_local_irq_disable"
+ : /* no outputs */
+ : /* no inputs */
+ : "memory");
+}
+
+
+__asm__(
+ " .macro arch_local_irq_save result \n"
+ " .set push \n"
+ " .set reorder \n"
+ " .set noat \n"
+ " di \\result \n"
+ " andi \\result, 1 \n"
+ " irq_disable_hazard \n"
+ " .set pop \n"
+ " .endm \n");
+
+static inline unsigned long arch_local_irq_save(void)
+{
+ unsigned long flags;
+ asm volatile("arch_local_irq_save\t%0"
+ : "=r" (flags)
+ : /* no inputs */
+ : "memory");
+ return flags;
+}
+
+
+__asm__(
+ " .macro arch_local_irq_restore flags \n"
+ " .set push \n"
+ " .set noreorder \n"
+ " .set noat \n"
+#if defined(CONFIG_IRQ_CPU)
+ /*
+ * Slow, but doesn't suffer from a relatively unlikely race
+ * condition we're having since days 1.
+ */
+ " beqz \\flags, 1f \n"
+ " di \n"
+ " ei \n"
+ "1: \n"
+#else
+ /*
+ * Fast, dangerous. Life is fun, life is good.
+ */
+ " mfc0 $1, $12 \n"
+ " ins $1, \\flags, 0, 1 \n"
+ " mtc0 $1, $12 \n"
+#endif
+ " irq_disable_hazard \n"
+ " .set pop \n"
+ " .endm \n");
+
+static inline void arch_local_irq_restore(unsigned long flags)
+{
+ unsigned long __tmp1;
+
+ __asm__ __volatile__(
+ "arch_local_irq_restore\t%0"
+ : "=r" (__tmp1)
+ : "0" (flags)
+ : "memory");
+}
+
+static inline void __arch_local_irq_restore(unsigned long flags)
+{
+ unsigned long __tmp1;
+
+ __asm__ __volatile__(
+ "arch_local_irq_restore\t%0"
+ : "=r" (__tmp1)
+ : "0" (flags)
+ : "memory");
+}
+#else
+/* Functions that require preempt_{dis,en}able() are in mips-atomic.c */
+void arch_local_irq_disable(void);
+unsigned long arch_local_irq_save(void);
+void arch_local_irq_restore(unsigned long flags);
+void __arch_local_irq_restore(unsigned long flags);
+#endif /* if defined(CONFIG_CPU_MIPSR2) && !defined(CONFIG_MIPS_MT_SMTC) */
+
+
__asm__(
" .macro arch_local_irq_enable \n"
" .set push \n"
@@ -57,55 +156,6 @@
}
-/*
- * For cli() we have to insert nops to make sure that the new value
- * has actually arrived in the status register before the end of this
- * macro.
- * R4000/R4400 need three nops, the R4600 two nops and the R10000 needs
- * no nops at all.
- */
-/*
- * For TX49, operating only IE bit is not enough.
- *
- * If mfc0 $12 follows store and the mfc0 is last instruction of a
- * page and fetching the next instruction causes TLB miss, the result
- * of the mfc0 might wrongly contain EXL bit.
- *
- * ERT-TX49H2-027, ERT-TX49H3-012, ERT-TX49HL3-006, ERT-TX49H4-008
- *
- * Workaround: mask EXL bit of the result or place a nop before mfc0.
- */
-__asm__(
- " .macro arch_local_irq_disable\n"
- " .set push \n"
- " .set noat \n"
-#ifdef CONFIG_MIPS_MT_SMTC
- " mfc0 $1, $2, 1 \n"
- " ori $1, 0x400 \n"
- " .set noreorder \n"
- " mtc0 $1, $2, 1 \n"
-#elif defined(CONFIG_CPU_MIPSR2)
- " di \n"
-#else
- " mfc0 $1,$12 \n"
- " ori $1,0x1f \n"
- " xori $1,0x1f \n"
- " .set noreorder \n"
- " mtc0 $1,$12 \n"
-#endif
- " irq_disable_hazard \n"
- " .set pop \n"
- " .endm \n");
-
-static inline void arch_local_irq_disable(void)
-{
- __asm__ __volatile__(
- "arch_local_irq_disable"
- : /* no outputs */
- : /* no inputs */
- : "memory");
-}
-
__asm__(
" .macro arch_local_save_flags flags \n"
" .set push \n"
@@ -125,113 +175,6 @@
return flags;
}
-__asm__(
- " .macro arch_local_irq_save result \n"
- " .set push \n"
- " .set reorder \n"
- " .set noat \n"
-#ifdef CONFIG_MIPS_MT_SMTC
- " mfc0 \\result, $2, 1 \n"
- " ori $1, \\result, 0x400 \n"
- " .set noreorder \n"
- " mtc0 $1, $2, 1 \n"
- " andi \\result, \\result, 0x400 \n"
-#elif defined(CONFIG_CPU_MIPSR2)
- " di \\result \n"
- " andi \\result, 1 \n"
-#else
- " mfc0 \\result, $12 \n"
- " ori $1, \\result, 0x1f \n"
- " xori $1, 0x1f \n"
- " .set noreorder \n"
- " mtc0 $1, $12 \n"
-#endif
- " irq_disable_hazard \n"
- " .set pop \n"
- " .endm \n");
-
-static inline unsigned long arch_local_irq_save(void)
-{
- unsigned long flags;
- asm volatile("arch_local_irq_save\t%0"
- : "=r" (flags)
- : /* no inputs */
- : "memory");
- return flags;
-}
-
-__asm__(
- " .macro arch_local_irq_restore flags \n"
- " .set push \n"
- " .set noreorder \n"
- " .set noat \n"
-#ifdef CONFIG_MIPS_MT_SMTC
- "mfc0 $1, $2, 1 \n"
- "andi \\flags, 0x400 \n"
- "ori $1, 0x400 \n"
- "xori $1, 0x400 \n"
- "or \\flags, $1 \n"
- "mtc0 \\flags, $2, 1 \n"
-#elif defined(CONFIG_CPU_MIPSR2) && defined(CONFIG_IRQ_CPU)
- /*
- * Slow, but doesn't suffer from a relatively unlikely race
- * condition we're having since days 1.
- */
- " beqz \\flags, 1f \n"
- " di \n"
- " ei \n"
- "1: \n"
-#elif defined(CONFIG_CPU_MIPSR2)
- /*
- * Fast, dangerous. Life is fun, life is good.
- */
- " mfc0 $1, $12 \n"
- " ins $1, \\flags, 0, 1 \n"
- " mtc0 $1, $12 \n"
-#else
- " mfc0 $1, $12 \n"
- " andi \\flags, 1 \n"
- " ori $1, 0x1f \n"
- " xori $1, 0x1f \n"
- " or \\flags, $1 \n"
- " mtc0 \\flags, $12 \n"
-#endif
- " irq_disable_hazard \n"
- " .set pop \n"
- " .endm \n");
-
-
-static inline void arch_local_irq_restore(unsigned long flags)
-{
- unsigned long __tmp1;
-
-#ifdef CONFIG_MIPS_MT_SMTC
- /*
- * SMTC kernel needs to do a software replay of queued
- * IPIs, at the cost of branch and call overhead on each
- * local_irq_restore()
- */
- if (unlikely(!(flags & 0x0400)))
- smtc_ipi_replay();
-#endif
-
- __asm__ __volatile__(
- "arch_local_irq_restore\t%0"
- : "=r" (__tmp1)
- : "0" (flags)
- : "memory");
-}
-
-static inline void __arch_local_irq_restore(unsigned long flags)
-{
- unsigned long __tmp1;
-
- __asm__ __volatile__(
- "arch_local_irq_restore\t%0"
- : "=r" (__tmp1)
- : "0" (flags)
- : "memory");
-}
static inline int arch_irqs_disabled_flags(unsigned long flags)
{
@@ -245,7 +188,7 @@
#endif
}
-#endif
+#endif /* #ifndef __ASSEMBLY__ */
/*
* Do the CPU's IRQ-state tracing from assembly code.
diff --git a/arch/mips/include/asm/thread_info.h b/arch/mips/include/asm/thread_info.h
index 8debe9e..18806a5 100644
--- a/arch/mips/include/asm/thread_info.h
+++ b/arch/mips/include/asm/thread_info.h
@@ -112,12 +112,6 @@
#define TIF_LOAD_WATCH 25 /* If set, load watch registers */
#define TIF_SYSCALL_TRACE 31 /* syscall trace active */
-#ifdef CONFIG_MIPS32_O32
-#define TIF_32BIT TIF_32BIT_REGS
-#elif defined(CONFIG_MIPS32_N32)
-#define TIF_32BIT _TIF_32BIT_ADDR
-#endif /* CONFIG_MIPS32_O32 */
-
#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE)
#define _TIF_SIGPENDING (1<<TIF_SIGPENDING)
#define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED)
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index a53f8ec3..290dc6a 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -79,7 +79,7 @@
void __init add_memory_region(phys_t start, phys_t size, long type)
{
int x = boot_mem_map.nr_map;
- struct boot_mem_map_entry *prev = boot_mem_map.map + x - 1;
+ int i;
/* Sanity check */
if (start + size < start) {
@@ -88,15 +88,29 @@
}
/*
- * Try to merge with previous entry if any. This is far less than
- * perfect but is sufficient for most real world cases.
+ * Try to merge with existing entry, if any.
*/
- if (x && prev->addr + prev->size == start && prev->type == type) {
- prev->size += size;
+ for (i = 0; i < boot_mem_map.nr_map; i++) {
+ struct boot_mem_map_entry *entry = boot_mem_map.map + i;
+ unsigned long top;
+
+ if (entry->type != type)
+ continue;
+
+ if (start + size < entry->addr)
+ continue; /* no overlap */
+
+ if (entry->addr + entry->size < start)
+ continue; /* no overlap */
+
+ top = max(entry->addr + entry->size, start + size);
+ entry->addr = min(entry->addr, start);
+ entry->size = top - entry->addr;
+
return;
}
- if (x == BOOT_MEM_MAP_MAX) {
+ if (boot_mem_map.nr_map == BOOT_MEM_MAP_MAX) {
pr_err("Ooops! Too many entries in the memory map!\n");
return;
}
diff --git a/arch/mips/lib/Makefile b/arch/mips/lib/Makefile
index c4a82e8..eeddc58 100644
--- a/arch/mips/lib/Makefile
+++ b/arch/mips/lib/Makefile
@@ -2,8 +2,9 @@
# Makefile for MIPS-specific library files..
#
-lib-y += csum_partial.o delay.o memcpy.o memset.o \
- strlen_user.o strncpy_user.o strnlen_user.o uncached.o
+lib-y += bitops.o csum_partial.o delay.o memcpy.o memset.o \
+ mips-atomic.o strlen_user.o strncpy_user.o \
+ strnlen_user.o uncached.o
obj-y += iomap.o
obj-$(CONFIG_PCI) += iomap-pci.o
diff --git a/arch/mips/lib/bitops.c b/arch/mips/lib/bitops.c
new file mode 100644
index 0000000..239a9c9
--- /dev/null
+++ b/arch/mips/lib/bitops.c
@@ -0,0 +1,179 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 1994-1997, 99, 2000, 06, 07 Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (c) 1999, 2000 Silicon Graphics, Inc.
+ */
+#include <linux/bitops.h>
+#include <linux/irqflags.h>
+#include <linux/export.h>
+
+
+/**
+ * __mips_set_bit - Atomically set a bit in memory. This is called by
+ * set_bit() if it cannot find a faster solution.
+ * @nr: the bit to set
+ * @addr: the address to start counting from
+ */
+void __mips_set_bit(unsigned long nr, volatile unsigned long *addr)
+{
+ volatile unsigned long *a = addr;
+ unsigned bit = nr & SZLONG_MASK;
+ unsigned long mask;
+ unsigned long flags;
+
+ a += nr >> SZLONG_LOG;
+ mask = 1UL << bit;
+ raw_local_irq_save(flags);
+ *a |= mask;
+ raw_local_irq_restore(flags);
+}
+EXPORT_SYMBOL(__mips_set_bit);
+
+
+/**
+ * __mips_clear_bit - Clears a bit in memory. This is called by clear_bit() if
+ * it cannot find a faster solution.
+ * @nr: Bit to clear
+ * @addr: Address to start counting from
+ */
+void __mips_clear_bit(unsigned long nr, volatile unsigned long *addr)
+{
+ volatile unsigned long *a = addr;
+ unsigned bit = nr & SZLONG_MASK;
+ unsigned long mask;
+ unsigned long flags;
+
+ a += nr >> SZLONG_LOG;
+ mask = 1UL << bit;
+ raw_local_irq_save(flags);
+ *a &= ~mask;
+ raw_local_irq_restore(flags);
+}
+EXPORT_SYMBOL(__mips_clear_bit);
+
+
+/**
+ * __mips_change_bit - Toggle a bit in memory. This is called by change_bit()
+ * if it cannot find a faster solution.
+ * @nr: Bit to change
+ * @addr: Address to start counting from
+ */
+void __mips_change_bit(unsigned long nr, volatile unsigned long *addr)
+{
+ volatile unsigned long *a = addr;
+ unsigned bit = nr & SZLONG_MASK;
+ unsigned long mask;
+ unsigned long flags;
+
+ a += nr >> SZLONG_LOG;
+ mask = 1UL << bit;
+ raw_local_irq_save(flags);
+ *a ^= mask;
+ raw_local_irq_restore(flags);
+}
+EXPORT_SYMBOL(__mips_change_bit);
+
+
+/**
+ * __mips_test_and_set_bit - Set a bit and return its old value. This is
+ * called by test_and_set_bit() if it cannot find a faster solution.
+ * @nr: Bit to set
+ * @addr: Address to count from
+ */
+int __mips_test_and_set_bit(unsigned long nr,
+ volatile unsigned long *addr)
+{
+ volatile unsigned long *a = addr;
+ unsigned bit = nr & SZLONG_MASK;
+ unsigned long mask;
+ unsigned long flags;
+ unsigned long res;
+
+ a += nr >> SZLONG_LOG;
+ mask = 1UL << bit;
+ raw_local_irq_save(flags);
+ res = (mask & *a);
+ *a |= mask;
+ raw_local_irq_restore(flags);
+ return res;
+}
+EXPORT_SYMBOL(__mips_test_and_set_bit);
+
+
+/**
+ * __mips_test_and_set_bit_lock - Set a bit and return its old value. This is
+ * called by test_and_set_bit_lock() if it cannot find a faster solution.
+ * @nr: Bit to set
+ * @addr: Address to count from
+ */
+int __mips_test_and_set_bit_lock(unsigned long nr,
+ volatile unsigned long *addr)
+{
+ volatile unsigned long *a = addr;
+ unsigned bit = nr & SZLONG_MASK;
+ unsigned long mask;
+ unsigned long flags;
+ unsigned long res;
+
+ a += nr >> SZLONG_LOG;
+ mask = 1UL << bit;
+ raw_local_irq_save(flags);
+ res = (mask & *a);
+ *a |= mask;
+ raw_local_irq_restore(flags);
+ return res;
+}
+EXPORT_SYMBOL(__mips_test_and_set_bit_lock);
+
+
+/**
+ * __mips_test_and_clear_bit - Clear a bit and return its old value. This is
+ * called by test_and_clear_bit() if it cannot find a faster solution.
+ * @nr: Bit to clear
+ * @addr: Address to count from
+ */
+int __mips_test_and_clear_bit(unsigned long nr, volatile unsigned long *addr)
+{
+ volatile unsigned long *a = addr;
+ unsigned bit = nr & SZLONG_MASK;
+ unsigned long mask;
+ unsigned long flags;
+ unsigned long res;
+
+ a += nr >> SZLONG_LOG;
+ mask = 1UL << bit;
+ raw_local_irq_save(flags);
+ res = (mask & *a);
+ *a &= ~mask;
+ raw_local_irq_restore(flags);
+ return res;
+}
+EXPORT_SYMBOL(__mips_test_and_clear_bit);
+
+
+/**
+ * __mips_test_and_change_bit - Change a bit and return its old value. This is
+ * called by test_and_change_bit() if it cannot find a faster solution.
+ * @nr: Bit to change
+ * @addr: Address to count from
+ */
+int __mips_test_and_change_bit(unsigned long nr, volatile unsigned long *addr)
+{
+ volatile unsigned long *a = addr;
+ unsigned bit = nr & SZLONG_MASK;
+ unsigned long mask;
+ unsigned long flags;
+ unsigned long res;
+
+ a += nr >> SZLONG_LOG;
+ mask = 1UL << bit;
+ raw_local_irq_save(flags);
+ res = (mask & *a);
+ *a ^= mask;
+ raw_local_irq_restore(flags);
+ return res;
+}
+EXPORT_SYMBOL(__mips_test_and_change_bit);
diff --git a/arch/mips/lib/mips-atomic.c b/arch/mips/lib/mips-atomic.c
new file mode 100644
index 0000000..cd160be
--- /dev/null
+++ b/arch/mips/lib/mips-atomic.c
@@ -0,0 +1,176 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994, 95, 96, 97, 98, 99, 2003 by Ralf Baechle
+ * Copyright (C) 1996 by Paul M. Antoine
+ * Copyright (C) 1999 Silicon Graphics
+ * Copyright (C) 2000 MIPS Technologies, Inc.
+ */
+#include <asm/irqflags.h>
+#include <asm/hazards.h>
+#include <linux/compiler.h>
+#include <linux/preempt.h>
+#include <linux/export.h>
+
+#if !defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_MIPS_MT_SMTC)
+
+/*
+ * For cli() we have to insert nops to make sure that the new value
+ * has actually arrived in the status register before the end of this
+ * macro.
+ * R4000/R4400 need three nops, the R4600 two nops and the R10000 needs
+ * no nops at all.
+ */
+/*
+ * For TX49, operating only IE bit is not enough.
+ *
+ * If mfc0 $12 follows store and the mfc0 is last instruction of a
+ * page and fetching the next instruction causes TLB miss, the result
+ * of the mfc0 might wrongly contain EXL bit.
+ *
+ * ERT-TX49H2-027, ERT-TX49H3-012, ERT-TX49HL3-006, ERT-TX49H4-008
+ *
+ * Workaround: mask EXL bit of the result or place a nop before mfc0.
+ */
+__asm__(
+ " .macro arch_local_irq_disable\n"
+ " .set push \n"
+ " .set noat \n"
+#ifdef CONFIG_MIPS_MT_SMTC
+ " mfc0 $1, $2, 1 \n"
+ " ori $1, 0x400 \n"
+ " .set noreorder \n"
+ " mtc0 $1, $2, 1 \n"
+#elif defined(CONFIG_CPU_MIPSR2)
+ /* see irqflags.h for inline function */
+#else
+ " mfc0 $1,$12 \n"
+ " ori $1,0x1f \n"
+ " xori $1,0x1f \n"
+ " .set noreorder \n"
+ " mtc0 $1,$12 \n"
+#endif
+ " irq_disable_hazard \n"
+ " .set pop \n"
+ " .endm \n");
+
+notrace void arch_local_irq_disable(void)
+{
+ preempt_disable();
+ __asm__ __volatile__(
+ "arch_local_irq_disable"
+ : /* no outputs */
+ : /* no inputs */
+ : "memory");
+ preempt_enable();
+}
+EXPORT_SYMBOL(arch_local_irq_disable);
+
+
+__asm__(
+ " .macro arch_local_irq_save result \n"
+ " .set push \n"
+ " .set reorder \n"
+ " .set noat \n"
+#ifdef CONFIG_MIPS_MT_SMTC
+ " mfc0 \\result, $2, 1 \n"
+ " ori $1, \\result, 0x400 \n"
+ " .set noreorder \n"
+ " mtc0 $1, $2, 1 \n"
+ " andi \\result, \\result, 0x400 \n"
+#elif defined(CONFIG_CPU_MIPSR2)
+ /* see irqflags.h for inline function */
+#else
+ " mfc0 \\result, $12 \n"
+ " ori $1, \\result, 0x1f \n"
+ " xori $1, 0x1f \n"
+ " .set noreorder \n"
+ " mtc0 $1, $12 \n"
+#endif
+ " irq_disable_hazard \n"
+ " .set pop \n"
+ " .endm \n");
+
+notrace unsigned long arch_local_irq_save(void)
+{
+ unsigned long flags;
+ preempt_disable();
+ asm volatile("arch_local_irq_save\t%0"
+ : "=r" (flags)
+ : /* no inputs */
+ : "memory");
+ preempt_enable();
+ return flags;
+}
+EXPORT_SYMBOL(arch_local_irq_save);
+
+
+__asm__(
+ " .macro arch_local_irq_restore flags \n"
+ " .set push \n"
+ " .set noreorder \n"
+ " .set noat \n"
+#ifdef CONFIG_MIPS_MT_SMTC
+ "mfc0 $1, $2, 1 \n"
+ "andi \\flags, 0x400 \n"
+ "ori $1, 0x400 \n"
+ "xori $1, 0x400 \n"
+ "or \\flags, $1 \n"
+ "mtc0 \\flags, $2, 1 \n"
+#elif defined(CONFIG_CPU_MIPSR2) && defined(CONFIG_IRQ_CPU)
+ /* see irqflags.h for inline function */
+#elif defined(CONFIG_CPU_MIPSR2)
+ /* see irqflags.h for inline function */
+#else
+ " mfc0 $1, $12 \n"
+ " andi \\flags, 1 \n"
+ " ori $1, 0x1f \n"
+ " xori $1, 0x1f \n"
+ " or \\flags, $1 \n"
+ " mtc0 \\flags, $12 \n"
+#endif
+ " irq_disable_hazard \n"
+ " .set pop \n"
+ " .endm \n");
+
+notrace void arch_local_irq_restore(unsigned long flags)
+{
+ unsigned long __tmp1;
+
+#ifdef CONFIG_MIPS_MT_SMTC
+ /*
+ * SMTC kernel needs to do a software replay of queued
+ * IPIs, at the cost of branch and call overhead on each
+ * local_irq_restore()
+ */
+ if (unlikely(!(flags & 0x0400)))
+ smtc_ipi_replay();
+#endif
+ preempt_disable();
+ __asm__ __volatile__(
+ "arch_local_irq_restore\t%0"
+ : "=r" (__tmp1)
+ : "0" (flags)
+ : "memory");
+ preempt_enable();
+}
+EXPORT_SYMBOL(arch_local_irq_restore);
+
+
+notrace void __arch_local_irq_restore(unsigned long flags)
+{
+ unsigned long __tmp1;
+
+ preempt_disable();
+ __asm__ __volatile__(
+ "arch_local_irq_restore\t%0"
+ : "=r" (__tmp1)
+ : "0" (flags)
+ : "memory");
+ preempt_enable();
+}
+EXPORT_SYMBOL(__arch_local_irq_restore);
+
+#endif /* !defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_MIPS_MT_SMTC) */
diff --git a/arch/mips/mti-malta/malta-platform.c b/arch/mips/mti-malta/malta-platform.c
index 80562b8..7473217 100644
--- a/arch/mips/mti-malta/malta-platform.c
+++ b/arch/mips/mti-malta/malta-platform.c
@@ -29,6 +29,7 @@
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/platform_device.h>
+#include <asm/mips-boards/maltaint.h>
#include <mtd/mtd-abi.h>
#define SMC_PORT(base, int) \
@@ -48,7 +49,7 @@
SMC_PORT(0x2F8, 3),
{
.mapbase = 0x1f000900, /* The CBUS UART */
- .irq = MIPS_CPU_IRQ_BASE + 2,
+ .irq = MIPS_CPU_IRQ_BASE + MIPSCPU_INT_MB2,
.uartclk = 3686400, /* Twice the usual clk! */
.iotype = UPIO_MEM32,
.flags = CBUS_UART_FLAGS,
diff --git a/arch/parisc/kernel/signal32.c b/arch/parisc/kernel/signal32.c
index fd49aed..5dede04 100644
--- a/arch/parisc/kernel/signal32.c
+++ b/arch/parisc/kernel/signal32.c
@@ -65,7 +65,8 @@
{
compat_sigset_t s;
- if (sz != sizeof *set) panic("put_sigset32()");
+ if (sz != sizeof *set)
+ return -EINVAL;
sigset_64to32(&s, set);
return copy_to_user(up, &s, sizeof s);
@@ -77,7 +78,8 @@
compat_sigset_t s;
int r;
- if (sz != sizeof *set) panic("put_sigset32()");
+ if (sz != sizeof *set)
+ return -EINVAL;
if ((r = copy_from_user(&s, up, sz)) == 0) {
sigset_32to64(set, &s);
diff --git a/arch/parisc/kernel/sys_parisc.c b/arch/parisc/kernel/sys_parisc.c
index 7426e40..f76c108 100644
--- a/arch/parisc/kernel/sys_parisc.c
+++ b/arch/parisc/kernel/sys_parisc.c
@@ -73,6 +73,8 @@
struct vm_area_struct *vma;
int offset = mapping ? get_offset(mapping) : 0;
+ offset = (offset + (pgoff << PAGE_SHIFT)) & 0x3FF000;
+
addr = DCACHE_ALIGN(addr - offset) + offset;
for (vma = find_vma(current->mm, addr); ; vma = vma->vm_next) {
diff --git a/arch/powerpc/boot/dts/mpc5200b.dtsi b/arch/powerpc/boot/dts/mpc5200b.dtsi
index 7ab286a..39ed65a 100644
--- a/arch/powerpc/boot/dts/mpc5200b.dtsi
+++ b/arch/powerpc/boot/dts/mpc5200b.dtsi
@@ -231,6 +231,12 @@
interrupts = <2 7 0>;
};
+ sclpc@3c00 {
+ compatible = "fsl,mpc5200-lpbfifo";
+ reg = <0x3c00 0x60>;
+ interrupts = <2 23 0>;
+ };
+
i2c@3d00 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/powerpc/boot/dts/o2d.dtsi b/arch/powerpc/boot/dts/o2d.dtsi
index 3444eb8..24f6680 100644
--- a/arch/powerpc/boot/dts/o2d.dtsi
+++ b/arch/powerpc/boot/dts/o2d.dtsi
@@ -86,12 +86,6 @@
reg = <0>;
};
};
-
- sclpc@3c00 {
- compatible = "fsl,mpc5200-lpbfifo";
- reg = <0x3c00 0x60>;
- interrupts = <3 23 0>;
- };
};
localbus {
diff --git a/arch/powerpc/boot/dts/pcm030.dts b/arch/powerpc/boot/dts/pcm030.dts
index 9e35499..96512c0 100644
--- a/arch/powerpc/boot/dts/pcm030.dts
+++ b/arch/powerpc/boot/dts/pcm030.dts
@@ -59,7 +59,7 @@
#gpio-cells = <2>;
};
- psc@2000 { /* PSC1 in ac97 mode */
+ audioplatform: psc@2000 { /* PSC1 in ac97 mode */
compatible = "mpc5200b-psc-ac97","fsl,mpc5200b-psc-ac97";
cell-index = <0>;
};
@@ -134,4 +134,9 @@
localbus {
status = "disabled";
};
+
+ sound {
+ compatible = "phytec,pcm030-audio-fabric";
+ asoc-platform = <&audioplatform>;
+ };
};
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pic.c b/arch/powerpc/platforms/52xx/mpc52xx_pic.c
index 8520b58..b89ef65 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_pic.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_pic.c
@@ -372,10 +372,11 @@
case MPC52xx_IRQ_L1_MAIN: irqchip = &mpc52xx_main_irqchip; break;
case MPC52xx_IRQ_L1_PERP: irqchip = &mpc52xx_periph_irqchip; break;
case MPC52xx_IRQ_L1_SDMA: irqchip = &mpc52xx_sdma_irqchip; break;
- default:
- pr_err("%s: invalid irq: virq=%i, l1=%i, l2=%i\n",
- __func__, virq, l1irq, l2irq);
- return -EINVAL;
+ case MPC52xx_IRQ_L1_CRIT:
+ pr_warn("%s: Critical IRQ #%d is unsupported! Nopping it.\n",
+ __func__, l2irq);
+ irq_set_chip(virq, &no_irq_chip);
+ return 0;
}
irq_set_chip_and_handler(virq, irqchip, handle_level_irq);
diff --git a/arch/powerpc/platforms/pseries/eeh_pe.c b/arch/powerpc/platforms/pseries/eeh_pe.c
index 797cd18..d16c8de 100644
--- a/arch/powerpc/platforms/pseries/eeh_pe.c
+++ b/arch/powerpc/platforms/pseries/eeh_pe.c
@@ -449,7 +449,7 @@
if (list_empty(&pe->edevs)) {
cnt = 0;
list_for_each_entry(child, &pe->child_list, child) {
- if (!(pe->type & EEH_PE_INVALID)) {
+ if (!(child->type & EEH_PE_INVALID)) {
cnt++;
break;
}
diff --git a/arch/powerpc/platforms/pseries/msi.c b/arch/powerpc/platforms/pseries/msi.c
index d19f497..e5b0847 100644
--- a/arch/powerpc/platforms/pseries/msi.c
+++ b/arch/powerpc/platforms/pseries/msi.c
@@ -220,7 +220,8 @@
/* Get the top level device in the PE */
edev = of_node_to_eeh_dev(dn);
- edev = list_first_entry(&edev->pe->edevs, struct eeh_dev, list);
+ if (edev->pe)
+ edev = list_first_entry(&edev->pe->edevs, struct eeh_dev, list);
dn = eeh_dev_to_of_node(edev);
if (!dn)
return NULL;
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 3f3d9ca..d385f39 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -96,6 +96,7 @@
select HAVE_MEMBLOCK_NODE_MAP
select HAVE_CMPXCHG_LOCAL
select HAVE_CMPXCHG_DOUBLE
+ select HAVE_ALIGNED_STRUCT_PAGE if SLUB
select HAVE_VIRT_CPU_ACCOUNTING
select VIRT_CPU_ACCOUNTING
select ARCH_DISCARD_MEMBLOCK
@@ -130,6 +131,7 @@
select ARCH_INLINE_WRITE_UNLOCK_IRQRESTORE
select HAVE_UID16 if 32BIT
select ARCH_WANT_IPC_PARSE_VERSION
+ select HAVE_ARCH_TRANSPARENT_HUGEPAGE if 64BIT
select GENERIC_SMP_IDLE_THREAD
select GENERIC_TIME_VSYSCALL_OLD
select GENERIC_CLOCKEVENTS
diff --git a/arch/s390/boot/compressed/vmlinux.lds.S b/arch/s390/boot/compressed/vmlinux.lds.S
index d80f79d..8e1fb82 100644
--- a/arch/s390/boot/compressed/vmlinux.lds.S
+++ b/arch/s390/boot/compressed/vmlinux.lds.S
@@ -5,7 +5,7 @@
OUTPUT_ARCH(s390:64-bit)
#else
OUTPUT_FORMAT("elf32-s390", "elf32-s390", "elf32-s390")
-OUTPUT_ARCH(s390)
+OUTPUT_ARCH(s390:31-bit)
#endif
ENTRY(startup)
diff --git a/arch/s390/include/asm/cio.h b/arch/s390/include/asm/cio.h
index 55bde60..ad2b924 100644
--- a/arch/s390/include/asm/cio.h
+++ b/arch/s390/include/asm/cio.h
@@ -9,6 +9,8 @@
#define LPM_ANYPATH 0xff
#define __MAX_CSSID 0
+#define __MAX_SUBCHANNEL 65535
+#define __MAX_SSID 3
#include <asm/scsw.h>
diff --git a/arch/s390/include/asm/compat.h b/arch/s390/include/asm/compat.h
index a34a9d6..18cd6b5 100644
--- a/arch/s390/include/asm/compat.h
+++ b/arch/s390/include/asm/compat.h
@@ -20,7 +20,7 @@
#define PSW32_MASK_CC 0x00003000UL
#define PSW32_MASK_PM 0x00000f00UL
-#define PSW32_MASK_USER 0x00003F00UL
+#define PSW32_MASK_USER 0x0000FF00UL
#define PSW32_ADDR_AMODE 0x80000000UL
#define PSW32_ADDR_INSN 0x7FFFFFFFUL
diff --git a/arch/s390/include/asm/perf_event.h b/arch/s390/include/asm/perf_event.h
index 7941968..5f0173a 100644
--- a/arch/s390/include/asm/perf_event.h
+++ b/arch/s390/include/asm/perf_event.h
@@ -9,7 +9,7 @@
#include <asm/cpu_mf.h>
/* CPU-measurement counter facility */
-#define PERF_CPUM_CF_MAX_CTR 160
+#define PERF_CPUM_CF_MAX_CTR 256
/* Per-CPU flags for PMU states */
#define PMU_F_RESERVED 0x1000
diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h
index dd647c9..2d3b7cb 100644
--- a/arch/s390/include/asm/pgtable.h
+++ b/arch/s390/include/asm/pgtable.h
@@ -506,12 +506,15 @@
static inline int pmd_present(pmd_t pmd)
{
- return (pmd_val(pmd) & _SEGMENT_ENTRY_ORIGIN) != 0UL;
+ unsigned long mask = _SEGMENT_ENTRY_INV | _SEGMENT_ENTRY_RO;
+ return (pmd_val(pmd) & mask) == _HPAGE_TYPE_NONE ||
+ !(pmd_val(pmd) & _SEGMENT_ENTRY_INV);
}
static inline int pmd_none(pmd_t pmd)
{
- return (pmd_val(pmd) & _SEGMENT_ENTRY_INV) != 0UL;
+ return (pmd_val(pmd) & _SEGMENT_ENTRY_INV) &&
+ !(pmd_val(pmd) & _SEGMENT_ENTRY_RO);
}
static inline int pmd_large(pmd_t pmd)
@@ -1223,6 +1226,11 @@
}
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+
+#define SEGMENT_NONE __pgprot(_HPAGE_TYPE_NONE)
+#define SEGMENT_RO __pgprot(_HPAGE_TYPE_RO)
+#define SEGMENT_RW __pgprot(_HPAGE_TYPE_RW)
+
#define __HAVE_ARCH_PGTABLE_DEPOSIT
extern void pgtable_trans_huge_deposit(struct mm_struct *mm, pgtable_t pgtable);
@@ -1242,16 +1250,15 @@
static inline unsigned long massage_pgprot_pmd(pgprot_t pgprot)
{
- unsigned long pgprot_pmd = 0;
-
- if (pgprot_val(pgprot) & _PAGE_INVALID) {
- if (pgprot_val(pgprot) & _PAGE_SWT)
- pgprot_pmd |= _HPAGE_TYPE_NONE;
- pgprot_pmd |= _SEGMENT_ENTRY_INV;
- }
- if (pgprot_val(pgprot) & _PAGE_RO)
- pgprot_pmd |= _SEGMENT_ENTRY_RO;
- return pgprot_pmd;
+ /*
+ * pgprot is PAGE_NONE, PAGE_RO, or PAGE_RW (see __Pxxx / __Sxxx)
+ * Convert to segment table entry format.
+ */
+ if (pgprot_val(pgprot) == pgprot_val(PAGE_NONE))
+ return pgprot_val(SEGMENT_NONE);
+ if (pgprot_val(pgprot) == pgprot_val(PAGE_RO))
+ return pgprot_val(SEGMENT_RO);
+ return pgprot_val(SEGMENT_RW);
}
static inline pmd_t pmd_modify(pmd_t pmd, pgprot_t newprot)
@@ -1269,7 +1276,9 @@
static inline pmd_t pmd_mkwrite(pmd_t pmd)
{
- pmd_val(pmd) &= ~_SEGMENT_ENTRY_RO;
+ /* Do not clobber _HPAGE_TYPE_NONE pages! */
+ if (!(pmd_val(pmd) & _SEGMENT_ENTRY_INV))
+ pmd_val(pmd) &= ~_SEGMENT_ENTRY_RO;
return pmd;
}
diff --git a/arch/s390/include/asm/topology.h b/arch/s390/include/asm/topology.h
index 9ca3053..9935cbd 100644
--- a/arch/s390/include/asm/topology.h
+++ b/arch/s390/include/asm/topology.h
@@ -8,6 +8,9 @@
#ifdef CONFIG_SCHED_BOOK
+extern unsigned char cpu_socket_id[NR_CPUS];
+#define topology_physical_package_id(cpu) (cpu_socket_id[cpu])
+
extern unsigned char cpu_core_id[NR_CPUS];
extern cpumask_t cpu_core_map[NR_CPUS];
diff --git a/arch/s390/include/uapi/asm/Kbuild b/arch/s390/include/uapi/asm/Kbuild
index 59b67ed4..7bf68ff 100644
--- a/arch/s390/include/uapi/asm/Kbuild
+++ b/arch/s390/include/uapi/asm/Kbuild
@@ -1,8 +1,6 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
-generic-y += kvm_para.h
-
header-y += auxvec.h
header-y += bitsperlong.h
header-y += byteorder.h
diff --git a/arch/s390/include/uapi/asm/chpid.h b/arch/s390/include/uapi/asm/chpid.h
index 581992d..6b4fb29 100644
--- a/arch/s390/include/uapi/asm/chpid.h
+++ b/arch/s390/include/uapi/asm/chpid.h
@@ -1,5 +1,5 @@
/*
- * Copyright IBM Corp. 2007
+ * Copyright IBM Corp. 2007, 2012
* Author(s): Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
*/
@@ -12,10 +12,10 @@
#define __MAX_CHPID 255
struct chp_id {
- u8 reserved1;
- u8 cssid;
- u8 reserved2;
- u8 id;
+ __u8 reserved1;
+ __u8 cssid;
+ __u8 reserved2;
+ __u8 id;
} __attribute__((packed));
diff --git a/arch/s390/include/uapi/asm/kvm_para.h b/arch/s390/include/uapi/asm/kvm_para.h
new file mode 100644
index 0000000..ff1f4e7b
--- /dev/null
+++ b/arch/s390/include/uapi/asm/kvm_para.h
@@ -0,0 +1,11 @@
+/*
+ * User API definitions for paravirtual devices on s390
+ *
+ * Copyright IBM Corp. 2008
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License (version 2 only)
+ * as published by the Free Software Foundation.
+ *
+ * Author(s): Christian Borntraeger <borntraeger@de.ibm.com>
+ */
diff --git a/arch/s390/include/uapi/asm/ptrace.h b/arch/s390/include/uapi/asm/ptrace.h
index 705588a..a5ca214 100644
--- a/arch/s390/include/uapi/asm/ptrace.h
+++ b/arch/s390/include/uapi/asm/ptrace.h
@@ -239,7 +239,7 @@
#define PSW_MASK_EA 0x00000000UL
#define PSW_MASK_BA 0x00000000UL
-#define PSW_MASK_USER 0x00003F00UL
+#define PSW_MASK_USER 0x0000FF00UL
#define PSW_ADDR_AMODE 0x80000000UL
#define PSW_ADDR_INSN 0x7FFFFFFFUL
@@ -269,7 +269,7 @@
#define PSW_MASK_EA 0x0000000100000000UL
#define PSW_MASK_BA 0x0000000080000000UL
-#define PSW_MASK_USER 0x00003F8180000000UL
+#define PSW_MASK_USER 0x0000FF8180000000UL
#define PSW_ADDR_AMODE 0x0000000000000000UL
#define PSW_ADDR_INSN 0xFFFFFFFFFFFFFFFFUL
diff --git a/arch/s390/kernel/cache.c b/arch/s390/kernel/cache.c
index 8df8d8a1..64b2465 100644
--- a/arch/s390/kernel/cache.c
+++ b/arch/s390/kernel/cache.c
@@ -59,8 +59,8 @@
enum {
CACHE_TI_UNIFIED = 0,
- CACHE_TI_INSTRUCTION = 0,
- CACHE_TI_DATA,
+ CACHE_TI_DATA = 0,
+ CACHE_TI_INSTRUCTION,
};
struct cache_info {
@@ -121,7 +121,10 @@
cache = kzalloc(sizeof(*cache), GFP_KERNEL);
if (!cache)
return -ENOMEM;
- ti = type == CACHE_TYPE_DATA ? CACHE_TI_DATA : CACHE_TI_UNIFIED;
+ if (type == CACHE_TYPE_INSTRUCTION)
+ ti = CACHE_TI_INSTRUCTION;
+ else
+ ti = CACHE_TI_UNIFIED;
cache->size = ecag(EXTRACT_SIZE, level, ti);
cache->line_size = ecag(EXTRACT_LINE_SIZE, level, ti);
cache->associativity = ecag(EXTRACT_ASSOCIATIVITY, level, ti);
diff --git a/arch/s390/kernel/compat_signal.c b/arch/s390/kernel/compat_signal.c
index a1e8a86..593fcc9 100644
--- a/arch/s390/kernel/compat_signal.c
+++ b/arch/s390/kernel/compat_signal.c
@@ -309,6 +309,10 @@
regs->psw.mask = (regs->psw.mask & ~PSW_MASK_USER) |
(__u64)(regs32.psw.mask & PSW32_MASK_USER) << 32 |
(__u64)(regs32.psw.addr & PSW32_ADDR_AMODE);
+ /* Check for invalid user address space control. */
+ if ((regs->psw.mask & PSW_MASK_ASC) >= (psw_kernel_bits & PSW_MASK_ASC))
+ regs->psw.mask = (psw_user_bits & PSW_MASK_ASC) |
+ (regs->psw.mask & ~PSW_MASK_ASC);
regs->psw.addr = (__u64)(regs32.psw.addr & PSW32_ADDR_INSN);
for (i = 0; i < NUM_GPRS; i++)
regs->gprs[i] = (__u64) regs32.gprs[i];
@@ -481,7 +485,10 @@
/* Set up registers for signal handler */
regs->gprs[15] = (__force __u64) frame;
- regs->psw.mask |= PSW_MASK_BA; /* force amode 31 */
+ /* Force 31 bit amode and default user address space control. */
+ regs->psw.mask = PSW_MASK_BA |
+ (psw_user_bits & PSW_MASK_ASC) |
+ (regs->psw.mask & ~PSW_MASK_ASC);
regs->psw.addr = (__force __u64) ka->sa.sa_handler;
regs->gprs[2] = map_signal(sig);
@@ -549,7 +556,10 @@
/* Set up registers for signal handler */
regs->gprs[15] = (__force __u64) frame;
- regs->psw.mask |= PSW_MASK_BA; /* force amode 31 */
+ /* Force 31 bit amode and default user address space control. */
+ regs->psw.mask = PSW_MASK_BA |
+ (psw_user_bits & PSW_MASK_ASC) |
+ (regs->psw.mask & ~PSW_MASK_ASC);
regs->psw.addr = (__u64) ka->sa.sa_handler;
regs->gprs[2] = map_signal(sig);
diff --git a/arch/s390/kernel/head_kdump.S b/arch/s390/kernel/head_kdump.S
index acaaaf4..085a95eb 100644
--- a/arch/s390/kernel/head_kdump.S
+++ b/arch/s390/kernel/head_kdump.S
@@ -85,16 +85,10 @@
.align 2
startup_kdump_relocated:
basr %r13,0
-0:
- mvc 0(8,%r0),.Lrestart_psw-0b(%r13) # Setup restart PSW
- sam31 # Switch to 31 bit addr mode
- sr %r1,%r1 # Erase register r1
- sr %r2,%r2 # Erase register r2
- sigp %r1,%r2,SIGP_SET_ARCHITECTURE # Switch to 31 bit arch mode
- lpsw 0 # Start new kernel...
+0: lpswe .Lrestart_psw-0b(%r13) # Start new kernel...
.align 8
.Lrestart_psw:
- .long 0x00080000,0x80000000 + startup
+ .quad 0x0000000080000000,0x0000000000000000 + startup
#else
.align 2
.Lep_startup_kdump:
diff --git a/arch/s390/kernel/perf_cpum_cf.c b/arch/s390/kernel/perf_cpum_cf.c
index 9871b19..c4e7269 100644
--- a/arch/s390/kernel/perf_cpum_cf.c
+++ b/arch/s390/kernel/perf_cpum_cf.c
@@ -94,7 +94,7 @@
set = CPUMF_CTR_SET_USER;
else if (event < 128)
set = CPUMF_CTR_SET_CRYPTO;
- else if (event < 160)
+ else if (event < 256)
set = CPUMF_CTR_SET_EXT;
return set;
@@ -138,6 +138,10 @@
case CPUMF_CTR_SET_EXT:
if (cpuhw->info.csvn < 1)
err = -EOPNOTSUPP;
+ if ((cpuhw->info.csvn == 1 && hwc->config > 159) ||
+ (cpuhw->info.csvn == 2 && hwc->config > 175) ||
+ (cpuhw->info.csvn > 2 && hwc->config > 255))
+ err = -EOPNOTSUPP;
break;
}
diff --git a/arch/s390/kernel/sclp.S b/arch/s390/kernel/sclp.S
index bf05389..b6506ee 100644
--- a/arch/s390/kernel/sclp.S
+++ b/arch/s390/kernel/sclp.S
@@ -44,6 +44,12 @@
#endif
mvc .LoldpswS1-.LbaseS1(16,%r13),0(%r8)
mvc 0(16,%r8),0(%r9)
+#ifdef CONFIG_64BIT
+ epsw %r6,%r7 # set current addressing mode
+ nill %r6,0x1 # in new psw (31 or 64 bit mode)
+ nilh %r7,0x8000
+ stm %r6,%r7,0(%r8)
+#endif
lhi %r6,0x0200 # cr mask for ext int (cr0.54)
ltr %r2,%r2
jz .LsetctS1
@@ -87,7 +93,7 @@
.long 0x00080000, 0x80000000+.LwaitS1 # PSW to handle ext int
#ifdef CONFIG_64BIT
.LextpswS1_64:
- .quad 0x0000000180000000, .LwaitS1 # PSW to handle ext int, 64 bit
+ .quad 0, .LwaitS1 # PSW to handle ext int, 64 bit
#endif
.LwaitpswS1:
.long 0x010a0000, 0x00000000+.LloopS1 # PSW to wait for ext int
diff --git a/arch/s390/kernel/signal.c b/arch/s390/kernel/signal.c
index c13a2a3..d1259d8 100644
--- a/arch/s390/kernel/signal.c
+++ b/arch/s390/kernel/signal.c
@@ -136,6 +136,10 @@
/* Use regs->psw.mask instead of psw_user_bits to preserve PER bit. */
regs->psw.mask = (regs->psw.mask & ~PSW_MASK_USER) |
(user_sregs.regs.psw.mask & PSW_MASK_USER);
+ /* Check for invalid user address space control. */
+ if ((regs->psw.mask & PSW_MASK_ASC) >= (psw_kernel_bits & PSW_MASK_ASC))
+ regs->psw.mask = (psw_user_bits & PSW_MASK_ASC) |
+ (regs->psw.mask & ~PSW_MASK_ASC);
/* Check for invalid amode */
if (regs->psw.mask & PSW_MASK_EA)
regs->psw.mask |= PSW_MASK_BA;
@@ -273,7 +277,10 @@
/* Set up registers for signal handler */
regs->gprs[15] = (unsigned long) frame;
- regs->psw.mask |= PSW_MASK_EA | PSW_MASK_BA; /* 64 bit amode */
+ /* Force default amode and default user address space control. */
+ regs->psw.mask = PSW_MASK_EA | PSW_MASK_BA |
+ (psw_user_bits & PSW_MASK_ASC) |
+ (regs->psw.mask & ~PSW_MASK_ASC);
regs->psw.addr = (unsigned long) ka->sa.sa_handler | PSW_ADDR_AMODE;
regs->gprs[2] = map_signal(sig);
@@ -346,7 +353,10 @@
/* Set up registers for signal handler */
regs->gprs[15] = (unsigned long) frame;
- regs->psw.mask |= PSW_MASK_EA | PSW_MASK_BA; /* 64 bit amode */
+ /* Force default amode and default user address space control. */
+ regs->psw.mask = PSW_MASK_EA | PSW_MASK_BA |
+ (psw_user_bits & PSW_MASK_ASC) |
+ (regs->psw.mask & ~PSW_MASK_ASC);
regs->psw.addr = (unsigned long) ka->sa.sa_handler | PSW_ADDR_AMODE;
regs->gprs[2] = map_signal(sig);
diff --git a/arch/s390/kernel/topology.c b/arch/s390/kernel/topology.c
index 54d93f4..dd55f7c 100644
--- a/arch/s390/kernel/topology.c
+++ b/arch/s390/kernel/topology.c
@@ -40,6 +40,7 @@
static struct mask_info core_info;
cpumask_t cpu_core_map[NR_CPUS];
unsigned char cpu_core_id[NR_CPUS];
+unsigned char cpu_socket_id[NR_CPUS];
static struct mask_info book_info;
cpumask_t cpu_book_map[NR_CPUS];
@@ -83,11 +84,12 @@
cpumask_set_cpu(lcpu, &book->mask);
cpu_book_id[lcpu] = book->id;
cpumask_set_cpu(lcpu, &core->mask);
+ cpu_core_id[lcpu] = rcpu;
if (one_core_per_cpu) {
- cpu_core_id[lcpu] = rcpu;
+ cpu_socket_id[lcpu] = rcpu;
core = core->next;
} else {
- cpu_core_id[lcpu] = core->id;
+ cpu_socket_id[lcpu] = core->id;
}
smp_cpu_set_polarization(lcpu, tl_cpu->pp);
}
diff --git a/arch/s390/kernel/vmlinux.lds.S b/arch/s390/kernel/vmlinux.lds.S
index de8fa9b..79cb51a 100644
--- a/arch/s390/kernel/vmlinux.lds.S
+++ b/arch/s390/kernel/vmlinux.lds.S
@@ -8,7 +8,7 @@
#ifndef CONFIG_64BIT
OUTPUT_FORMAT("elf32-s390", "elf32-s390", "elf32-s390")
-OUTPUT_ARCH(s390)
+OUTPUT_ARCH(s390:31-bit)
ENTRY(startup)
jiffies = jiffies_64 + 4;
#else
diff --git a/arch/s390/lib/uaccess_pt.c b/arch/s390/lib/uaccess_pt.c
index 2d37bb8..9017a63 100644
--- a/arch/s390/lib/uaccess_pt.c
+++ b/arch/s390/lib/uaccess_pt.c
@@ -39,7 +39,7 @@
pmd = pmd_offset(pud, addr);
if (pmd_none(*pmd))
return -0x10UL;
- if (pmd_huge(*pmd)) {
+ if (pmd_large(*pmd)) {
if (write && (pmd_val(*pmd) & _SEGMENT_ENTRY_RO))
return -0x04UL;
return (pmd_val(*pmd) & HPAGE_MASK) + (addr & ~HPAGE_MASK);
diff --git a/arch/s390/mm/gup.c b/arch/s390/mm/gup.c
index 60acb93..1f5315d1 100644
--- a/arch/s390/mm/gup.c
+++ b/arch/s390/mm/gup.c
@@ -126,7 +126,7 @@
*/
if (pmd_none(pmd) || pmd_trans_splitting(pmd))
return 0;
- if (unlikely(pmd_huge(pmd))) {
+ if (unlikely(pmd_large(pmd))) {
if (!gup_huge_pmd(pmdp, pmd, addr, next,
write, pages, nr))
return 0;
@@ -180,8 +180,7 @@
addr = start;
len = (unsigned long) nr_pages << PAGE_SHIFT;
end = start + len;
- if (unlikely(!access_ok(write ? VERIFY_WRITE : VERIFY_READ,
- (void __user *)start, len)))
+ if ((end < start) || (end > TASK_SIZE))
return 0;
local_irq_save(flags);
@@ -229,7 +228,7 @@
addr = start;
len = (unsigned long) nr_pages << PAGE_SHIFT;
end = start + len;
- if (end < start)
+ if ((end < start) || (end > TASK_SIZE))
goto slow_irqon;
/*
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index b6b442b..9f2edb5 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -20,6 +20,7 @@
select HAVE_ARCH_TRACEHOOK
select SYSCTL_EXCEPTION_TRACE
select ARCH_WANT_OPTIONAL_GPIOLIB
+ select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
select RTC_CLASS
select RTC_DRV_M48T59
select HAVE_IRQ_WORK
diff --git a/arch/sparc/crypto/Makefile b/arch/sparc/crypto/Makefile
index 6ae1ad5..5d469d8 100644
--- a/arch/sparc/crypto/Makefile
+++ b/arch/sparc/crypto/Makefile
@@ -13,13 +13,13 @@
obj-$(CONFIG_CRYPTO_CRC32C_SPARC64) += crc32c-sparc64.o
-sha1-sparc64-y := sha1_asm.o sha1_glue.o crop_devid.o
-sha256-sparc64-y := sha256_asm.o sha256_glue.o crop_devid.o
-sha512-sparc64-y := sha512_asm.o sha512_glue.o crop_devid.o
-md5-sparc64-y := md5_asm.o md5_glue.o crop_devid.o
+sha1-sparc64-y := sha1_asm.o sha1_glue.o
+sha256-sparc64-y := sha256_asm.o sha256_glue.o
+sha512-sparc64-y := sha512_asm.o sha512_glue.o
+md5-sparc64-y := md5_asm.o md5_glue.o
-aes-sparc64-y := aes_asm.o aes_glue.o crop_devid.o
-des-sparc64-y := des_asm.o des_glue.o crop_devid.o
-camellia-sparc64-y := camellia_asm.o camellia_glue.o crop_devid.o
+aes-sparc64-y := aes_asm.o aes_glue.o
+des-sparc64-y := des_asm.o des_glue.o
+camellia-sparc64-y := camellia_asm.o camellia_glue.o
-crc32c-sparc64-y := crc32c_asm.o crc32c_glue.o crop_devid.o
+crc32c-sparc64-y := crc32c_asm.o crc32c_glue.o
diff --git a/arch/sparc/crypto/aes_glue.c b/arch/sparc/crypto/aes_glue.c
index 8f1c998..3965d1d 100644
--- a/arch/sparc/crypto/aes_glue.c
+++ b/arch/sparc/crypto/aes_glue.c
@@ -475,3 +475,5 @@
MODULE_DESCRIPTION("AES Secure Hash Algorithm, sparc64 aes opcode accelerated");
MODULE_ALIAS("aes");
+
+#include "crop_devid.c"
diff --git a/arch/sparc/crypto/camellia_glue.c b/arch/sparc/crypto/camellia_glue.c
index 42905c0..62c89af 100644
--- a/arch/sparc/crypto/camellia_glue.c
+++ b/arch/sparc/crypto/camellia_glue.c
@@ -320,3 +320,5 @@
MODULE_DESCRIPTION("Camellia Cipher Algorithm, sparc64 camellia opcode accelerated");
MODULE_ALIAS("aes");
+
+#include "crop_devid.c"
diff --git a/arch/sparc/crypto/crc32c_glue.c b/arch/sparc/crypto/crc32c_glue.c
index 0bd89ce..5162fad 100644
--- a/arch/sparc/crypto/crc32c_glue.c
+++ b/arch/sparc/crypto/crc32c_glue.c
@@ -177,3 +177,5 @@
MODULE_DESCRIPTION("CRC32c (Castagnoli), sparc64 crc32c opcode accelerated");
MODULE_ALIAS("crc32c");
+
+#include "crop_devid.c"
diff --git a/arch/sparc/crypto/des_glue.c b/arch/sparc/crypto/des_glue.c
index c4940c2..41524ce 100644
--- a/arch/sparc/crypto/des_glue.c
+++ b/arch/sparc/crypto/des_glue.c
@@ -527,3 +527,5 @@
MODULE_DESCRIPTION("DES & Triple DES EDE Cipher Algorithms, sparc64 des opcode accelerated");
MODULE_ALIAS("des");
+
+#include "crop_devid.c"
diff --git a/arch/sparc/crypto/md5_glue.c b/arch/sparc/crypto/md5_glue.c
index 603d723..09a9ea1 100644
--- a/arch/sparc/crypto/md5_glue.c
+++ b/arch/sparc/crypto/md5_glue.c
@@ -186,3 +186,5 @@
MODULE_DESCRIPTION("MD5 Secure Hash Algorithm, sparc64 md5 opcode accelerated");
MODULE_ALIAS("md5");
+
+#include "crop_devid.c"
diff --git a/arch/sparc/crypto/sha1_glue.c b/arch/sparc/crypto/sha1_glue.c
index 2bbb20b..6cd5f29 100644
--- a/arch/sparc/crypto/sha1_glue.c
+++ b/arch/sparc/crypto/sha1_glue.c
@@ -181,3 +181,5 @@
MODULE_DESCRIPTION("SHA1 Secure Hash Algorithm, sparc64 sha1 opcode accelerated");
MODULE_ALIAS("sha1");
+
+#include "crop_devid.c"
diff --git a/arch/sparc/crypto/sha256_glue.c b/arch/sparc/crypto/sha256_glue.c
index 591e656..04f555a 100644
--- a/arch/sparc/crypto/sha256_glue.c
+++ b/arch/sparc/crypto/sha256_glue.c
@@ -239,3 +239,5 @@
MODULE_ALIAS("sha224");
MODULE_ALIAS("sha256");
+
+#include "crop_devid.c"
diff --git a/arch/sparc/crypto/sha512_glue.c b/arch/sparc/crypto/sha512_glue.c
index 486f0a2..f04d199 100644
--- a/arch/sparc/crypto/sha512_glue.c
+++ b/arch/sparc/crypto/sha512_glue.c
@@ -224,3 +224,5 @@
MODULE_ALIAS("sha384");
MODULE_ALIAS("sha512");
+
+#include "crop_devid.c"
diff --git a/arch/sparc/include/asm/atomic_64.h b/arch/sparc/include/asm/atomic_64.h
index ce35a1c..be56a24 100644
--- a/arch/sparc/include/asm/atomic_64.h
+++ b/arch/sparc/include/asm/atomic_64.h
@@ -1,7 +1,7 @@
/* atomic.h: Thankfully the V9 is at least reasonable for this
* stuff.
*
- * Copyright (C) 1996, 1997, 2000 David S. Miller (davem@redhat.com)
+ * Copyright (C) 1996, 1997, 2000, 2012 David S. Miller (davem@redhat.com)
*/
#ifndef __ARCH_SPARC64_ATOMIC__
@@ -106,6 +106,8 @@
#define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0)
+extern long atomic64_dec_if_positive(atomic64_t *v);
+
/* Atomic operations are already serializing */
#define smp_mb__before_atomic_dec() barrier()
#define smp_mb__after_atomic_dec() barrier()
diff --git a/arch/sparc/include/asm/backoff.h b/arch/sparc/include/asm/backoff.h
index db3af0d..4e02086 100644
--- a/arch/sparc/include/asm/backoff.h
+++ b/arch/sparc/include/asm/backoff.h
@@ -1,6 +1,46 @@
#ifndef _SPARC64_BACKOFF_H
#define _SPARC64_BACKOFF_H
+/* The macros in this file implement an exponential backoff facility
+ * for atomic operations.
+ *
+ * When multiple threads compete on an atomic operation, it is
+ * possible for one thread to be continually denied a successful
+ * completion of the compare-and-swap instruction. Heavily
+ * threaded cpu implementations like Niagara can compound this
+ * problem even further.
+ *
+ * When an atomic operation fails and needs to be retried, we spin a
+ * certain number of times. At each subsequent failure of the same
+ * operation we double the spin count, realizing an exponential
+ * backoff.
+ *
+ * When we spin, we try to use an operation that will cause the
+ * current cpu strand to block, and therefore make the core fully
+ * available to any other other runnable strands. There are two
+ * options, based upon cpu capabilities.
+ *
+ * On all cpus prior to SPARC-T4 we do three dummy reads of the
+ * condition code register. Each read blocks the strand for something
+ * between 40 and 50 cpu cycles.
+ *
+ * For SPARC-T4 and later we have a special "pause" instruction
+ * available. This is implemented using writes to register %asr27.
+ * The cpu will block the number of cycles written into the register,
+ * unless a disrupting trap happens first. SPARC-T4 specifically
+ * implements pause with a granularity of 8 cycles. Each strand has
+ * an internal pause counter which decrements every 8 cycles. So the
+ * chip shifts the %asr27 value down by 3 bits, and writes the result
+ * into the pause counter. If a value smaller than 8 is written, the
+ * chip blocks for 1 cycle.
+ *
+ * To achieve the same amount of backoff as the three %ccr reads give
+ * on earlier chips, we shift the backoff value up by 7 bits. (Three
+ * %ccr reads block for about 128 cycles, 1 << 7 == 128) We write the
+ * whole amount we want to block into the pause register, rather than
+ * loop writing 128 each time.
+ */
+
#define BACKOFF_LIMIT (4 * 1024)
#ifdef CONFIG_SMP
@@ -11,16 +51,25 @@
#define BACKOFF_LABEL(spin_label, continue_label) \
spin_label
-#define BACKOFF_SPIN(reg, tmp, label) \
- mov reg, tmp; \
-88: brnz,pt tmp, 88b; \
- sub tmp, 1, tmp; \
- set BACKOFF_LIMIT, tmp; \
- cmp reg, tmp; \
- bg,pn %xcc, label; \
- nop; \
- ba,pt %xcc, label; \
- sllx reg, 1, reg;
+#define BACKOFF_SPIN(reg, tmp, label) \
+ mov reg, tmp; \
+88: rd %ccr, %g0; \
+ rd %ccr, %g0; \
+ rd %ccr, %g0; \
+ .section .pause_3insn_patch,"ax";\
+ .word 88b; \
+ sllx tmp, 7, tmp; \
+ wr tmp, 0, %asr27; \
+ clr tmp; \
+ .previous; \
+ brnz,pt tmp, 88b; \
+ sub tmp, 1, tmp; \
+ set BACKOFF_LIMIT, tmp; \
+ cmp reg, tmp; \
+ bg,pn %xcc, label; \
+ nop; \
+ ba,pt %xcc, label; \
+ sllx reg, 1, reg;
#else
diff --git a/arch/sparc/include/asm/compat.h b/arch/sparc/include/asm/compat.h
index cef99fb..830502fe 100644
--- a/arch/sparc/include/asm/compat.h
+++ b/arch/sparc/include/asm/compat.h
@@ -232,9 +232,10 @@
struct pt_regs *regs = current_thread_info()->kregs;
unsigned long usp = regs->u_regs[UREG_I6];
- if (!(test_thread_flag(TIF_32BIT)))
+ if (test_thread_64bit_stack(usp))
usp += STACK_BIAS;
- else
+
+ if (test_thread_flag(TIF_32BIT))
usp &= 0xffffffffUL;
usp -= len;
diff --git a/arch/sparc/include/asm/processor_64.h b/arch/sparc/include/asm/processor_64.h
index 4e5a483..721e25f 100644
--- a/arch/sparc/include/asm/processor_64.h
+++ b/arch/sparc/include/asm/processor_64.h
@@ -196,7 +196,22 @@
#define KSTK_EIP(tsk) (task_pt_regs(tsk)->tpc)
#define KSTK_ESP(tsk) (task_pt_regs(tsk)->u_regs[UREG_FP])
-#define cpu_relax() barrier()
+/* Please see the commentary in asm/backoff.h for a description of
+ * what these instructions are doing and how they have been choosen.
+ * To make a long story short, we are trying to yield the current cpu
+ * strand during busy loops.
+ */
+#define cpu_relax() asm volatile("\n99:\n\t" \
+ "rd %%ccr, %%g0\n\t" \
+ "rd %%ccr, %%g0\n\t" \
+ "rd %%ccr, %%g0\n\t" \
+ ".section .pause_3insn_patch,\"ax\"\n\t"\
+ ".word 99b\n\t" \
+ "wr %%g0, 128, %%asr27\n\t" \
+ "nop\n\t" \
+ "nop\n\t" \
+ ".previous" \
+ ::: "memory")
/* Prefetch support. This is tuned for UltraSPARC-III and later.
* UltraSPARC-I will treat these as nops, and UltraSPARC-II has
diff --git a/arch/sparc/include/asm/prom.h b/arch/sparc/include/asm/prom.h
index c287651..67c6257 100644
--- a/arch/sparc/include/asm/prom.h
+++ b/arch/sparc/include/asm/prom.h
@@ -63,5 +63,13 @@
extern void irq_trans_init(struct device_node *dp);
extern char *build_path_component(struct device_node *dp);
+/* SPARC has local implementations */
+extern int of_address_to_resource(struct device_node *dev, int index,
+ struct resource *r);
+#define of_address_to_resource of_address_to_resource
+
+void __iomem *of_iomap(struct device_node *node, int index);
+#define of_iomap of_iomap
+
#endif /* __KERNEL__ */
#endif /* _SPARC_PROM_H */
diff --git a/arch/sparc/include/asm/thread_info_64.h b/arch/sparc/include/asm/thread_info_64.h
index 4e227663..a3fe4dc 100644
--- a/arch/sparc/include/asm/thread_info_64.h
+++ b/arch/sparc/include/asm/thread_info_64.h
@@ -259,6 +259,11 @@
#define tsk_is_polling(t) test_tsk_thread_flag(t, TIF_POLLING_NRFLAG)
+#define thread32_stack_is_64bit(__SP) (((__SP) & 0x1) != 0)
+#define test_thread_64bit_stack(__SP) \
+ ((test_thread_flag(TIF_32BIT) && !thread32_stack_is_64bit(__SP)) ? \
+ false : true)
+
#endif /* !__ASSEMBLY__ */
#endif /* __KERNEL__ */
diff --git a/arch/sparc/include/asm/ttable.h b/arch/sparc/include/asm/ttable.h
index 48f2807..71b5a67 100644
--- a/arch/sparc/include/asm/ttable.h
+++ b/arch/sparc/include/asm/ttable.h
@@ -372,7 +372,9 @@
/* Normal 32bit spill */
#define SPILL_2_GENERIC(ASI) \
- srl %sp, 0, %sp; \
+ and %sp, 1, %g3; \
+ brnz,pn %g3, (. - (128 + 4)); \
+ srl %sp, 0, %sp; \
stwa %l0, [%sp + %g0] ASI; \
mov 0x04, %g3; \
stwa %l1, [%sp + %g3] ASI; \
@@ -398,14 +400,16 @@
stwa %i6, [%g1 + %g0] ASI; \
stwa %i7, [%g1 + %g3] ASI; \
saved; \
- retry; nop; nop; \
+ retry; \
b,a,pt %xcc, spill_fixup_dax; \
b,a,pt %xcc, spill_fixup_mna; \
b,a,pt %xcc, spill_fixup;
#define SPILL_2_GENERIC_ETRAP \
etrap_user_spill_32bit: \
- srl %sp, 0, %sp; \
+ and %sp, 1, %g3; \
+ brnz,pn %g3, etrap_user_spill_64bit; \
+ srl %sp, 0, %sp; \
stwa %l0, [%sp + 0x00] %asi; \
stwa %l1, [%sp + 0x04] %asi; \
stwa %l2, [%sp + 0x08] %asi; \
@@ -427,7 +431,7 @@
ba,pt %xcc, etrap_save; \
wrpr %g1, %cwp; \
nop; nop; nop; nop; \
- nop; nop; nop; nop; \
+ nop; nop; \
ba,a,pt %xcc, etrap_spill_fixup_32bit; \
ba,a,pt %xcc, etrap_spill_fixup_32bit; \
ba,a,pt %xcc, etrap_spill_fixup_32bit;
@@ -592,7 +596,9 @@
/* Normal 32bit fill */
#define FILL_2_GENERIC(ASI) \
- srl %sp, 0, %sp; \
+ and %sp, 1, %g3; \
+ brnz,pn %g3, (. - (128 + 4)); \
+ srl %sp, 0, %sp; \
lduwa [%sp + %g0] ASI, %l0; \
mov 0x04, %g2; \
mov 0x08, %g3; \
@@ -616,14 +622,16 @@
lduwa [%g1 + %g3] ASI, %i6; \
lduwa [%g1 + %g5] ASI, %i7; \
restored; \
- retry; nop; nop; nop; nop; \
+ retry; nop; nop; \
b,a,pt %xcc, fill_fixup_dax; \
b,a,pt %xcc, fill_fixup_mna; \
b,a,pt %xcc, fill_fixup;
#define FILL_2_GENERIC_RTRAP \
user_rtt_fill_32bit: \
- srl %sp, 0, %sp; \
+ and %sp, 1, %g3; \
+ brnz,pn %g3, user_rtt_fill_64bit; \
+ srl %sp, 0, %sp; \
lduwa [%sp + 0x00] %asi, %l0; \
lduwa [%sp + 0x04] %asi, %l1; \
lduwa [%sp + 0x08] %asi, %l2; \
@@ -643,7 +651,7 @@
ba,pt %xcc, user_rtt_pre_restore; \
restored; \
nop; nop; nop; nop; nop; \
- nop; nop; nop; nop; nop; \
+ nop; nop; nop; \
ba,a,pt %xcc, user_rtt_fill_fixup; \
ba,a,pt %xcc, user_rtt_fill_fixup; \
ba,a,pt %xcc, user_rtt_fill_fixup;
diff --git a/arch/sparc/include/uapi/asm/unistd.h b/arch/sparc/include/uapi/asm/unistd.h
index 8974ef7a..cac719d 100644
--- a/arch/sparc/include/uapi/asm/unistd.h
+++ b/arch/sparc/include/uapi/asm/unistd.h
@@ -405,8 +405,13 @@
#define __NR_setns 337
#define __NR_process_vm_readv 338
#define __NR_process_vm_writev 339
+#define __NR_kern_features 340
+#define __NR_kcmp 341
-#define NR_syscalls 340
+#define NR_syscalls 342
+
+/* Bitmask values returned from kern_features system call. */
+#define KERN_FEATURE_MIXED_MODE_STACK 0x00000001
#ifdef __32bit_syscall_numbers__
/* Sparc 32-bit only has the "setresuid32", "getresuid32" variants,
diff --git a/arch/sparc/kernel/entry.h b/arch/sparc/kernel/entry.h
index 0c218e4..cc3c5cb 100644
--- a/arch/sparc/kernel/entry.h
+++ b/arch/sparc/kernel/entry.h
@@ -59,6 +59,13 @@
extern struct popc_6insn_patch_entry __popc_6insn_patch,
__popc_6insn_patch_end;
+struct pause_patch_entry {
+ unsigned int addr;
+ unsigned int insns[3];
+};
+extern struct pause_patch_entry __pause_3insn_patch,
+ __pause_3insn_patch_end;
+
extern void __init per_cpu_patch(void);
extern void sun4v_patch_1insn_range(struct sun4v_1insn_patch_entry *,
struct sun4v_1insn_patch_entry *);
diff --git a/arch/sparc/kernel/leon_kernel.c b/arch/sparc/kernel/leon_kernel.c
index f8b6eee..87f60ee 100644
--- a/arch/sparc/kernel/leon_kernel.c
+++ b/arch/sparc/kernel/leon_kernel.c
@@ -56,11 +56,13 @@
static void leon_handle_ext_irq(unsigned int irq, struct irq_desc *desc)
{
unsigned int eirq;
+ struct irq_bucket *p;
int cpu = sparc_leon3_cpuid();
eirq = leon_eirq_get(cpu);
- if ((eirq & 0x10) && irq_map[eirq]->irq) /* bit4 tells if IRQ happened */
- generic_handle_irq(irq_map[eirq]->irq);
+ p = irq_map[eirq];
+ if ((eirq & 0x10) && p && p->irq) /* bit4 tells if IRQ happened */
+ generic_handle_irq(p->irq);
}
/* The extended IRQ controller has been found, this function registers it */
diff --git a/arch/sparc/kernel/perf_event.c b/arch/sparc/kernel/perf_event.c
index 885a8af..b5c38fa 100644
--- a/arch/sparc/kernel/perf_event.c
+++ b/arch/sparc/kernel/perf_event.c
@@ -1762,15 +1762,25 @@
ufp = regs->u_regs[UREG_I6] & 0xffffffffUL;
do {
- struct sparc_stackf32 *usf, sf;
unsigned long pc;
- usf = (struct sparc_stackf32 *) ufp;
- if (__copy_from_user_inatomic(&sf, usf, sizeof(sf)))
- break;
+ if (thread32_stack_is_64bit(ufp)) {
+ struct sparc_stackf *usf, sf;
- pc = sf.callers_pc;
- ufp = (unsigned long)sf.fp;
+ ufp += STACK_BIAS;
+ usf = (struct sparc_stackf *) ufp;
+ if (__copy_from_user_inatomic(&sf, usf, sizeof(sf)))
+ break;
+ pc = sf.callers_pc & 0xffffffff;
+ ufp = ((unsigned long) sf.fp) & 0xffffffff;
+ } else {
+ struct sparc_stackf32 *usf, sf;
+ usf = (struct sparc_stackf32 *) ufp;
+ if (__copy_from_user_inatomic(&sf, usf, sizeof(sf)))
+ break;
+ pc = sf.callers_pc;
+ ufp = (unsigned long)sf.fp;
+ }
perf_callchain_store(entry, pc);
} while (entry->nr < PERF_MAX_STACK_DEPTH);
}
diff --git a/arch/sparc/kernel/process_64.c b/arch/sparc/kernel/process_64.c
index d778248..c6e0c29 100644
--- a/arch/sparc/kernel/process_64.c
+++ b/arch/sparc/kernel/process_64.c
@@ -452,13 +452,16 @@
/* It's a bit more tricky when 64-bit tasks are involved... */
static unsigned long clone_stackframe(unsigned long csp, unsigned long psp)
{
+ bool stack_64bit = test_thread_64bit_stack(psp);
unsigned long fp, distance, rval;
- if (!(test_thread_flag(TIF_32BIT))) {
+ if (stack_64bit) {
csp += STACK_BIAS;
psp += STACK_BIAS;
__get_user(fp, &(((struct reg_window __user *)psp)->ins[6]));
fp += STACK_BIAS;
+ if (test_thread_flag(TIF_32BIT))
+ fp &= 0xffffffff;
} else
__get_user(fp, &(((struct reg_window32 __user *)psp)->ins[6]));
@@ -472,7 +475,7 @@
rval = (csp - distance);
if (copy_in_user((void __user *) rval, (void __user *) psp, distance))
rval = 0;
- else if (test_thread_flag(TIF_32BIT)) {
+ else if (!stack_64bit) {
if (put_user(((u32)csp),
&(((struct reg_window32 __user *)rval)->ins[6])))
rval = 0;
@@ -507,18 +510,18 @@
flush_user_windows();
if ((window = get_thread_wsaved()) != 0) {
- int winsize = sizeof(struct reg_window);
- int bias = 0;
-
- if (test_thread_flag(TIF_32BIT))
- winsize = sizeof(struct reg_window32);
- else
- bias = STACK_BIAS;
-
window -= 1;
do {
- unsigned long sp = (t->rwbuf_stkptrs[window] + bias);
struct reg_window *rwin = &t->reg_window[window];
+ int winsize = sizeof(struct reg_window);
+ unsigned long sp;
+
+ sp = t->rwbuf_stkptrs[window];
+
+ if (test_thread_64bit_stack(sp))
+ sp += STACK_BIAS;
+ else
+ winsize = sizeof(struct reg_window32);
if (!copy_to_user((char __user *)sp, rwin, winsize)) {
shift_window_buffer(window, get_thread_wsaved() - 1, t);
@@ -544,13 +547,6 @@
{
struct thread_info *t = current_thread_info();
unsigned long window;
- int winsize = sizeof(struct reg_window);
- int bias = 0;
-
- if (test_thread_flag(TIF_32BIT))
- winsize = sizeof(struct reg_window32);
- else
- bias = STACK_BIAS;
flush_user_windows();
window = get_thread_wsaved();
@@ -558,8 +554,16 @@
if (likely(window != 0)) {
window -= 1;
do {
- unsigned long sp = (t->rwbuf_stkptrs[window] + bias);
struct reg_window *rwin = &t->reg_window[window];
+ int winsize = sizeof(struct reg_window);
+ unsigned long sp;
+
+ sp = t->rwbuf_stkptrs[window];
+
+ if (test_thread_64bit_stack(sp))
+ sp += STACK_BIAS;
+ else
+ winsize = sizeof(struct reg_window32);
if (unlikely(sp & 0x7UL))
stack_unaligned(sp);
diff --git a/arch/sparc/kernel/ptrace_64.c b/arch/sparc/kernel/ptrace_64.c
index 484daba..7ff45e4 100644
--- a/arch/sparc/kernel/ptrace_64.c
+++ b/arch/sparc/kernel/ptrace_64.c
@@ -151,7 +151,7 @@
{
unsigned long rw_addr = regs->u_regs[UREG_I6];
- if (test_tsk_thread_flag(current, TIF_32BIT)) {
+ if (!test_thread_64bit_stack(rw_addr)) {
struct reg_window32 win32;
int i;
@@ -176,7 +176,7 @@
{
unsigned long rw_addr = regs->u_regs[UREG_I6];
- if (test_tsk_thread_flag(current, TIF_32BIT)) {
+ if (!test_thread_64bit_stack(rw_addr)) {
struct reg_window32 win32;
int i;
diff --git a/arch/sparc/kernel/setup_64.c b/arch/sparc/kernel/setup_64.c
index 0800e71..0eaf005 100644
--- a/arch/sparc/kernel/setup_64.c
+++ b/arch/sparc/kernel/setup_64.c
@@ -316,6 +316,25 @@
}
}
+static void __init pause_patch(void)
+{
+ struct pause_patch_entry *p;
+
+ p = &__pause_3insn_patch;
+ while (p < &__pause_3insn_patch_end) {
+ unsigned long i, addr = p->addr;
+
+ for (i = 0; i < 3; i++) {
+ *(unsigned int *) (addr + (i * 4)) = p->insns[i];
+ wmb();
+ __asm__ __volatile__("flush %0"
+ : : "r" (addr + (i * 4)));
+ }
+
+ p++;
+ }
+}
+
#ifdef CONFIG_SMP
void __init boot_cpu_id_too_large(int cpu)
{
@@ -528,6 +547,8 @@
if (sparc64_elf_hwcap & AV_SPARC_POPC)
popc_patch();
+ if (sparc64_elf_hwcap & AV_SPARC_PAUSE)
+ pause_patch();
}
void __init setup_arch(char **cmdline_p)
diff --git a/arch/sparc/kernel/signal_64.c b/arch/sparc/kernel/signal_64.c
index 867de2f..689e1ba 100644
--- a/arch/sparc/kernel/signal_64.c
+++ b/arch/sparc/kernel/signal_64.c
@@ -295,9 +295,7 @@
err |= restore_fpu_state(regs, fpu_save);
err |= __copy_from_user(&set, &sf->mask, sizeof(sigset_t));
- err |= do_sigaltstack(&sf->stack, NULL, (unsigned long)sf);
-
- if (err)
+ if (err || do_sigaltstack(&sf->stack, NULL, (unsigned long)sf) == -EFAULT)
goto segv;
err |= __get_user(rwin_save, &sf->rwin_save);
diff --git a/arch/sparc/kernel/sys_sparc_64.c b/arch/sparc/kernel/sys_sparc_64.c
index 11c6c96..878ef3d 100644
--- a/arch/sparc/kernel/sys_sparc_64.c
+++ b/arch/sparc/kernel/sys_sparc_64.c
@@ -751,3 +751,8 @@
: "cc");
return __res;
}
+
+asmlinkage long sys_kern_features(void)
+{
+ return KERN_FEATURE_MIXED_MODE_STACK;
+}
diff --git a/arch/sparc/kernel/systbls_32.S b/arch/sparc/kernel/systbls_32.S
index 63402f9..5147f57 100644
--- a/arch/sparc/kernel/systbls_32.S
+++ b/arch/sparc/kernel/systbls_32.S
@@ -85,3 +85,4 @@
/*325*/ .long sys_pwritev, sys_rt_tgsigqueueinfo, sys_perf_event_open, sys_recvmmsg, sys_fanotify_init
/*330*/ .long sys_fanotify_mark, sys_prlimit64, sys_name_to_handle_at, sys_open_by_handle_at, sys_clock_adjtime
/*335*/ .long sys_syncfs, sys_sendmmsg, sys_setns, sys_process_vm_readv, sys_process_vm_writev
+/*340*/ .long sys_ni_syscall, sys_kcmp
diff --git a/arch/sparc/kernel/systbls_64.S b/arch/sparc/kernel/systbls_64.S
index 3a58e0d..1c9af9f 100644
--- a/arch/sparc/kernel/systbls_64.S
+++ b/arch/sparc/kernel/systbls_64.S
@@ -86,6 +86,7 @@
.word compat_sys_pwritev, compat_sys_rt_tgsigqueueinfo, sys_perf_event_open, compat_sys_recvmmsg, sys_fanotify_init
/*330*/ .word sys32_fanotify_mark, sys_prlimit64, sys_name_to_handle_at, compat_sys_open_by_handle_at, compat_sys_clock_adjtime
.word sys_syncfs, compat_sys_sendmmsg, sys_setns, compat_sys_process_vm_readv, compat_sys_process_vm_writev
+/*340*/ .word sys_kern_features, sys_kcmp
#endif /* CONFIG_COMPAT */
@@ -163,3 +164,4 @@
.word sys_pwritev, sys_rt_tgsigqueueinfo, sys_perf_event_open, sys_recvmmsg, sys_fanotify_init
/*330*/ .word sys_fanotify_mark, sys_prlimit64, sys_name_to_handle_at, sys_open_by_handle_at, sys_clock_adjtime
.word sys_syncfs, sys_sendmmsg, sys_setns, sys_process_vm_readv, sys_process_vm_writev
+/*340*/ .word sys_kern_features, sys_kcmp
diff --git a/arch/sparc/kernel/unaligned_64.c b/arch/sparc/kernel/unaligned_64.c
index f81d038..8201c25e 100644
--- a/arch/sparc/kernel/unaligned_64.c
+++ b/arch/sparc/kernel/unaligned_64.c
@@ -113,21 +113,24 @@
static unsigned long fetch_reg(unsigned int reg, struct pt_regs *regs)
{
- unsigned long value;
+ unsigned long value, fp;
if (reg < 16)
return (!reg ? 0 : regs->u_regs[reg]);
+
+ fp = regs->u_regs[UREG_FP];
+
if (regs->tstate & TSTATE_PRIV) {
struct reg_window *win;
- win = (struct reg_window *)(regs->u_regs[UREG_FP] + STACK_BIAS);
+ win = (struct reg_window *)(fp + STACK_BIAS);
value = win->locals[reg - 16];
- } else if (test_thread_flag(TIF_32BIT)) {
+ } else if (!test_thread_64bit_stack(fp)) {
struct reg_window32 __user *win32;
- win32 = (struct reg_window32 __user *)((unsigned long)((u32)regs->u_regs[UREG_FP]));
+ win32 = (struct reg_window32 __user *)((unsigned long)((u32)fp));
get_user(value, &win32->locals[reg - 16]);
} else {
struct reg_window __user *win;
- win = (struct reg_window __user *)(regs->u_regs[UREG_FP] + STACK_BIAS);
+ win = (struct reg_window __user *)(fp + STACK_BIAS);
get_user(value, &win->locals[reg - 16]);
}
return value;
@@ -135,19 +138,24 @@
static unsigned long *fetch_reg_addr(unsigned int reg, struct pt_regs *regs)
{
+ unsigned long fp;
+
if (reg < 16)
return ®s->u_regs[reg];
+
+ fp = regs->u_regs[UREG_FP];
+
if (regs->tstate & TSTATE_PRIV) {
struct reg_window *win;
- win = (struct reg_window *)(regs->u_regs[UREG_FP] + STACK_BIAS);
+ win = (struct reg_window *)(fp + STACK_BIAS);
return &win->locals[reg - 16];
- } else if (test_thread_flag(TIF_32BIT)) {
+ } else if (!test_thread_64bit_stack(fp)) {
struct reg_window32 *win32;
- win32 = (struct reg_window32 *)((unsigned long)((u32)regs->u_regs[UREG_FP]));
+ win32 = (struct reg_window32 *)((unsigned long)((u32)fp));
return (unsigned long *)&win32->locals[reg - 16];
} else {
struct reg_window *win;
- win = (struct reg_window *)(regs->u_regs[UREG_FP] + STACK_BIAS);
+ win = (struct reg_window *)(fp + STACK_BIAS);
return &win->locals[reg - 16];
}
}
@@ -392,13 +400,15 @@
if (rd)
regs->u_regs[rd] = ret;
} else {
- if (test_thread_flag(TIF_32BIT)) {
+ unsigned long fp = regs->u_regs[UREG_FP];
+
+ if (!test_thread_64bit_stack(fp)) {
struct reg_window32 __user *win32;
- win32 = (struct reg_window32 __user *)((unsigned long)((u32)regs->u_regs[UREG_FP]));
+ win32 = (struct reg_window32 __user *)((unsigned long)((u32)fp));
put_user(ret, &win32->locals[rd - 16]);
} else {
struct reg_window __user *win;
- win = (struct reg_window __user *)(regs->u_regs[UREG_FP] + STACK_BIAS);
+ win = (struct reg_window __user *)(fp + STACK_BIAS);
put_user(ret, &win->locals[rd - 16]);
}
}
@@ -554,7 +564,7 @@
reg[0] = 0;
if ((insn & 0x780000) == 0x180000)
reg[1] = 0;
- } else if (test_thread_flag(TIF_32BIT)) {
+ } else if (!test_thread_64bit_stack(regs->u_regs[UREG_FP])) {
put_user(0, (int __user *) reg);
if ((insn & 0x780000) == 0x180000)
put_user(0, ((int __user *) reg) + 1);
diff --git a/arch/sparc/kernel/visemul.c b/arch/sparc/kernel/visemul.c
index 08e074b7..c096c62 100644
--- a/arch/sparc/kernel/visemul.c
+++ b/arch/sparc/kernel/visemul.c
@@ -149,21 +149,24 @@
static unsigned long fetch_reg(unsigned int reg, struct pt_regs *regs)
{
- unsigned long value;
+ unsigned long value, fp;
if (reg < 16)
return (!reg ? 0 : regs->u_regs[reg]);
+
+ fp = regs->u_regs[UREG_FP];
+
if (regs->tstate & TSTATE_PRIV) {
struct reg_window *win;
- win = (struct reg_window *)(regs->u_regs[UREG_FP] + STACK_BIAS);
+ win = (struct reg_window *)(fp + STACK_BIAS);
value = win->locals[reg - 16];
- } else if (test_thread_flag(TIF_32BIT)) {
+ } else if (!test_thread_64bit_stack(fp)) {
struct reg_window32 __user *win32;
- win32 = (struct reg_window32 __user *)((unsigned long)((u32)regs->u_regs[UREG_FP]));
+ win32 = (struct reg_window32 __user *)((unsigned long)((u32)fp));
get_user(value, &win32->locals[reg - 16]);
} else {
struct reg_window __user *win;
- win = (struct reg_window __user *)(regs->u_regs[UREG_FP] + STACK_BIAS);
+ win = (struct reg_window __user *)(fp + STACK_BIAS);
get_user(value, &win->locals[reg - 16]);
}
return value;
@@ -172,16 +175,18 @@
static inline unsigned long __user *__fetch_reg_addr_user(unsigned int reg,
struct pt_regs *regs)
{
+ unsigned long fp = regs->u_regs[UREG_FP];
+
BUG_ON(reg < 16);
BUG_ON(regs->tstate & TSTATE_PRIV);
- if (test_thread_flag(TIF_32BIT)) {
+ if (!test_thread_64bit_stack(fp)) {
struct reg_window32 __user *win32;
- win32 = (struct reg_window32 __user *)((unsigned long)((u32)regs->u_regs[UREG_FP]));
+ win32 = (struct reg_window32 __user *)((unsigned long)((u32)fp));
return (unsigned long __user *)&win32->locals[reg - 16];
} else {
struct reg_window __user *win;
- win = (struct reg_window __user *)(regs->u_regs[UREG_FP] + STACK_BIAS);
+ win = (struct reg_window __user *)(fp + STACK_BIAS);
return &win->locals[reg - 16];
}
}
@@ -204,7 +209,7 @@
} else {
unsigned long __user *rd_user = __fetch_reg_addr_user(rd, regs);
- if (test_thread_flag(TIF_32BIT))
+ if (!test_thread_64bit_stack(regs->u_regs[UREG_FP]))
__put_user((u32)val, (u32 __user *)rd_user);
else
__put_user(val, rd_user);
diff --git a/arch/sparc/kernel/vmlinux.lds.S b/arch/sparc/kernel/vmlinux.lds.S
index 89c2c29..0bacceb 100644
--- a/arch/sparc/kernel/vmlinux.lds.S
+++ b/arch/sparc/kernel/vmlinux.lds.S
@@ -132,6 +132,11 @@
*(.popc_6insn_patch)
__popc_6insn_patch_end = .;
}
+ .pause_3insn_patch : {
+ __pause_3insn_patch = .;
+ *(.pause_3insn_patch)
+ __pause_3insn_patch_end = .;
+ }
PERCPU_SECTION(SMP_CACHE_BYTES)
. = ALIGN(PAGE_SIZE);
diff --git a/arch/sparc/kernel/winfixup.S b/arch/sparc/kernel/winfixup.S
index a6b0863..1e67ce9 100644
--- a/arch/sparc/kernel/winfixup.S
+++ b/arch/sparc/kernel/winfixup.S
@@ -43,6 +43,8 @@
spill_fixup_dax:
TRAP_LOAD_THREAD_REG(%g6, %g1)
ldx [%g6 + TI_FLAGS], %g1
+ andcc %sp, 0x1, %g0
+ movne %icc, 0, %g1
andcc %g1, _TIF_32BIT, %g0
ldub [%g6 + TI_WSAVED], %g1
sll %g1, 3, %g3
diff --git a/arch/sparc/lib/atomic_64.S b/arch/sparc/lib/atomic_64.S
index 4d502da..85c233d 100644
--- a/arch/sparc/lib/atomic_64.S
+++ b/arch/sparc/lib/atomic_64.S
@@ -1,6 +1,6 @@
/* atomic.S: These things are too big to do inline.
*
- * Copyright (C) 1999, 2007 David S. Miller (davem@davemloft.net)
+ * Copyright (C) 1999, 2007 2012 David S. Miller (davem@davemloft.net)
*/
#include <linux/linkage.h>
@@ -117,3 +117,17 @@
sub %g1, %o0, %o0
2: BACKOFF_SPIN(%o2, %o3, 1b)
ENDPROC(atomic64_sub_ret)
+
+ENTRY(atomic64_dec_if_positive) /* %o0 = atomic_ptr */
+ BACKOFF_SETUP(%o2)
+1: ldx [%o0], %g1
+ brlez,pn %g1, 3f
+ sub %g1, 1, %g7
+ casx [%o0], %g1, %g7
+ cmp %g1, %g7
+ bne,pn %xcc, BACKOFF_LABEL(2f, 1b)
+ nop
+3: retl
+ sub %g1, 1, %o0
+2: BACKOFF_SPIN(%o2, %o3, 1b)
+ENDPROC(atomic64_dec_if_positive)
diff --git a/arch/sparc/lib/ksyms.c b/arch/sparc/lib/ksyms.c
index ee31b88..0c4e35e 100644
--- a/arch/sparc/lib/ksyms.c
+++ b/arch/sparc/lib/ksyms.c
@@ -116,6 +116,7 @@
EXPORT_SYMBOL(atomic64_add_ret);
EXPORT_SYMBOL(atomic64_sub);
EXPORT_SYMBOL(atomic64_sub_ret);
+EXPORT_SYMBOL(atomic64_dec_if_positive);
/* Atomic bit operations. */
EXPORT_SYMBOL(test_and_set_bit);
diff --git a/arch/sparc/math-emu/math_64.c b/arch/sparc/math-emu/math_64.c
index 1704068..034aadb 100644
--- a/arch/sparc/math-emu/math_64.c
+++ b/arch/sparc/math-emu/math_64.c
@@ -320,7 +320,7 @@
XR = 0;
else if (freg < 16)
XR = regs->u_regs[freg];
- else if (test_thread_flag(TIF_32BIT)) {
+ else if (!test_thread_64bit_stack(regs->u_regs[UREG_FP])) {
struct reg_window32 __user *win32;
flushw_user ();
win32 = (struct reg_window32 __user *)((unsigned long)((u32)regs->u_regs[UREG_FP]));
diff --git a/arch/tile/Makefile b/arch/tile/Makefile
index 55640cf..3d15364 100644
--- a/arch/tile/Makefile
+++ b/arch/tile/Makefile
@@ -26,6 +26,10 @@
endif
endif
+# The tile compiler may emit .eh_frame information for backtracing.
+# In kernel modules, this causes load failures due to unsupported relocations.
+KBUILD_CFLAGS += -fno-asynchronous-unwind-tables
+
ifneq ($(CONFIG_DEBUG_EXTRA_FLAGS),"")
KBUILD_CFLAGS += $(CONFIG_DEBUG_EXTRA_FLAGS)
endif
diff --git a/arch/tile/kernel/module.c b/arch/tile/kernel/module.c
index 001cbfa..243ffeb 100644
--- a/arch/tile/kernel/module.c
+++ b/arch/tile/kernel/module.c
@@ -24,16 +24,6 @@
#include <asm/homecache.h>
#include <arch/opcode.h>
-#ifdef __tilegx__
-# define Elf_Rela Elf64_Rela
-# define ELF_R_SYM ELF64_R_SYM
-# define ELF_R_TYPE ELF64_R_TYPE
-#else
-# define Elf_Rela Elf32_Rela
-# define ELF_R_SYM ELF32_R_SYM
-# define ELF_R_TYPE ELF32_R_TYPE
-#endif
-
#ifdef MODULE_DEBUG
#define DEBUGP printk
#else
diff --git a/arch/unicore32/Kconfig b/arch/unicore32/Kconfig
index e5c5473..c4fbb21 100644
--- a/arch/unicore32/Kconfig
+++ b/arch/unicore32/Kconfig
@@ -16,6 +16,8 @@
select ARCH_WANT_FRAME_POINTERS
select GENERIC_IOMAP
select MODULES_USE_ELF_REL
+ select GENERIC_KERNEL_THREAD
+ select GENERIC_KERNEL_EXECVE
help
UniCore-32 is 32-bit Instruction Set Architecture,
including a series of low-power-consumption RISC chip
@@ -64,6 +66,9 @@
config ARCH_MAY_HAVE_PC_FDC
bool
+config ZONE_DMA
+ def_bool y
+
config NEED_DMA_MAP_STATE
def_bool y
@@ -216,7 +221,7 @@
bool
depends on !ARCH_FPGA
select GENERIC_GPIO
- select GPIO_SYSFS if EXPERIMENTAL
+ select GPIO_SYSFS
default y
if PUV3_NB0916
diff --git a/arch/unicore32/include/asm/Kbuild b/arch/unicore32/include/asm/Kbuild
index c910c98..601e92f 100644
--- a/arch/unicore32/include/asm/Kbuild
+++ b/arch/unicore32/include/asm/Kbuild
@@ -1,4 +1,3 @@
-include include/asm-generic/Kbuild.asm
generic-y += atomic.h
generic-y += auxvec.h
diff --git a/arch/unicore32/include/asm/bug.h b/arch/unicore32/include/asm/bug.h
index b1ff8ca..93a56f3 100644
--- a/arch/unicore32/include/asm/bug.h
+++ b/arch/unicore32/include/asm/bug.h
@@ -19,9 +19,4 @@
extern void uc32_notify_die(const char *str, struct pt_regs *regs,
struct siginfo *info, unsigned long err, unsigned long trap);
-extern asmlinkage void __backtrace(void);
-extern asmlinkage void c_backtrace(unsigned long fp, int pmode);
-
-extern void __show_regs(struct pt_regs *);
-
#endif /* __UNICORE_BUG_H__ */
diff --git a/arch/unicore32/include/asm/cmpxchg.h b/arch/unicore32/include/asm/cmpxchg.h
index df4d5ac..8e797ad 100644
--- a/arch/unicore32/include/asm/cmpxchg.h
+++ b/arch/unicore32/include/asm/cmpxchg.h
@@ -35,7 +35,7 @@
: "memory", "cc");
break;
default:
- ret = __xchg_bad_pointer();
+ __xchg_bad_pointer();
}
return ret;
diff --git a/arch/unicore32/include/asm/kvm_para.h b/arch/unicore32/include/asm/kvm_para.h
deleted file mode 100644
index 14fab8f..0000000
--- a/arch/unicore32/include/asm/kvm_para.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/kvm_para.h>
diff --git a/arch/unicore32/include/asm/processor.h b/arch/unicore32/include/asm/processor.h
index 14382cb..4eaa421 100644
--- a/arch/unicore32/include/asm/processor.h
+++ b/arch/unicore32/include/asm/processor.h
@@ -72,11 +72,6 @@
#define cpu_relax() barrier()
-/*
- * Create a new kernel thread
- */
-extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags);
-
#define task_pt_regs(p) \
((struct pt_regs *)(THREAD_START_SP + task_stack_page(p)) - 1)
diff --git a/arch/unicore32/include/asm/ptrace.h b/arch/unicore32/include/asm/ptrace.h
index b9caf9b..726749d 100644
--- a/arch/unicore32/include/asm/ptrace.h
+++ b/arch/unicore32/include/asm/ptrace.h
@@ -12,80 +12,10 @@
#ifndef __UNICORE_PTRACE_H__
#define __UNICORE_PTRACE_H__
-#define PTRACE_GET_THREAD_AREA 22
-
-/*
- * PSR bits
- */
-#define USER_MODE 0x00000010
-#define REAL_MODE 0x00000011
-#define INTR_MODE 0x00000012
-#define PRIV_MODE 0x00000013
-#define ABRT_MODE 0x00000017
-#define EXTN_MODE 0x0000001b
-#define SUSR_MODE 0x0000001f
-#define MODE_MASK 0x0000001f
-#define PSR_R_BIT 0x00000040
-#define PSR_I_BIT 0x00000080
-#define PSR_V_BIT 0x10000000
-#define PSR_C_BIT 0x20000000
-#define PSR_Z_BIT 0x40000000
-#define PSR_S_BIT 0x80000000
-
-/*
- * Groups of PSR bits
- */
-#define PSR_f 0xff000000 /* Flags */
-#define PSR_c 0x000000ff /* Control */
+#include <uapi/asm/ptrace.h>
#ifndef __ASSEMBLY__
-/*
- * This struct defines the way the registers are stored on the
- * stack during a system call. Note that sizeof(struct pt_regs)
- * has to be a multiple of 8.
- */
-struct pt_regs {
- unsigned long uregs[34];
-};
-
-#define UCreg_asr uregs[32]
-#define UCreg_pc uregs[31]
-#define UCreg_lr uregs[30]
-#define UCreg_sp uregs[29]
-#define UCreg_ip uregs[28]
-#define UCreg_fp uregs[27]
-#define UCreg_26 uregs[26]
-#define UCreg_25 uregs[25]
-#define UCreg_24 uregs[24]
-#define UCreg_23 uregs[23]
-#define UCreg_22 uregs[22]
-#define UCreg_21 uregs[21]
-#define UCreg_20 uregs[20]
-#define UCreg_19 uregs[19]
-#define UCreg_18 uregs[18]
-#define UCreg_17 uregs[17]
-#define UCreg_16 uregs[16]
-#define UCreg_15 uregs[15]
-#define UCreg_14 uregs[14]
-#define UCreg_13 uregs[13]
-#define UCreg_12 uregs[12]
-#define UCreg_11 uregs[11]
-#define UCreg_10 uregs[10]
-#define UCreg_09 uregs[9]
-#define UCreg_08 uregs[8]
-#define UCreg_07 uregs[7]
-#define UCreg_06 uregs[6]
-#define UCreg_05 uregs[5]
-#define UCreg_04 uregs[4]
-#define UCreg_03 uregs[3]
-#define UCreg_02 uregs[2]
-#define UCreg_01 uregs[1]
-#define UCreg_00 uregs[0]
-#define UCreg_ORIG_00 uregs[33]
-
-#ifdef __KERNEL__
-
#define user_mode(regs) \
(processor_mode(regs) == USER_MODE)
@@ -125,9 +55,5 @@
#define instruction_pointer(regs) ((regs)->UCreg_pc)
-#endif /* __KERNEL__ */
-
#endif /* __ASSEMBLY__ */
-
#endif
-
diff --git a/arch/unicore32/include/uapi/asm/Kbuild b/arch/unicore32/include/uapi/asm/Kbuild
index baebb3d..0514d7a 100644
--- a/arch/unicore32/include/uapi/asm/Kbuild
+++ b/arch/unicore32/include/uapi/asm/Kbuild
@@ -1,3 +1,10 @@
# UAPI Header export list
include include/uapi/asm-generic/Kbuild.asm
+header-y += byteorder.h
+header-y += kvm_para.h
+header-y += ptrace.h
+header-y += sigcontext.h
+header-y += unistd.h
+
+generic-y += kvm_para.h
diff --git a/arch/unicore32/include/asm/byteorder.h b/arch/unicore32/include/uapi/asm/byteorder.h
similarity index 100%
rename from arch/unicore32/include/asm/byteorder.h
rename to arch/unicore32/include/uapi/asm/byteorder.h
diff --git a/arch/unicore32/include/uapi/asm/ptrace.h b/arch/unicore32/include/uapi/asm/ptrace.h
new file mode 100644
index 0000000..187aa2e
--- /dev/null
+++ b/arch/unicore32/include/uapi/asm/ptrace.h
@@ -0,0 +1,90 @@
+/*
+ * linux/arch/unicore32/include/asm/ptrace.h
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef _UAPI__UNICORE_PTRACE_H__
+#define _UAPI__UNICORE_PTRACE_H__
+
+#define PTRACE_GET_THREAD_AREA 22
+
+/*
+ * PSR bits
+ */
+#define USER_MODE 0x00000010
+#define REAL_MODE 0x00000011
+#define INTR_MODE 0x00000012
+#define PRIV_MODE 0x00000013
+#define ABRT_MODE 0x00000017
+#define EXTN_MODE 0x0000001b
+#define SUSR_MODE 0x0000001f
+#define MODE_MASK 0x0000001f
+#define PSR_R_BIT 0x00000040
+#define PSR_I_BIT 0x00000080
+#define PSR_V_BIT 0x10000000
+#define PSR_C_BIT 0x20000000
+#define PSR_Z_BIT 0x40000000
+#define PSR_S_BIT 0x80000000
+
+/*
+ * Groups of PSR bits
+ */
+#define PSR_f 0xff000000 /* Flags */
+#define PSR_c 0x000000ff /* Control */
+
+#ifndef __ASSEMBLY__
+
+/*
+ * This struct defines the way the registers are stored on the
+ * stack during a system call. Note that sizeof(struct pt_regs)
+ * has to be a multiple of 8.
+ */
+struct pt_regs {
+ unsigned long uregs[34];
+};
+
+#define UCreg_asr uregs[32]
+#define UCreg_pc uregs[31]
+#define UCreg_lr uregs[30]
+#define UCreg_sp uregs[29]
+#define UCreg_ip uregs[28]
+#define UCreg_fp uregs[27]
+#define UCreg_26 uregs[26]
+#define UCreg_25 uregs[25]
+#define UCreg_24 uregs[24]
+#define UCreg_23 uregs[23]
+#define UCreg_22 uregs[22]
+#define UCreg_21 uregs[21]
+#define UCreg_20 uregs[20]
+#define UCreg_19 uregs[19]
+#define UCreg_18 uregs[18]
+#define UCreg_17 uregs[17]
+#define UCreg_16 uregs[16]
+#define UCreg_15 uregs[15]
+#define UCreg_14 uregs[14]
+#define UCreg_13 uregs[13]
+#define UCreg_12 uregs[12]
+#define UCreg_11 uregs[11]
+#define UCreg_10 uregs[10]
+#define UCreg_09 uregs[9]
+#define UCreg_08 uregs[8]
+#define UCreg_07 uregs[7]
+#define UCreg_06 uregs[6]
+#define UCreg_05 uregs[5]
+#define UCreg_04 uregs[4]
+#define UCreg_03 uregs[3]
+#define UCreg_02 uregs[2]
+#define UCreg_01 uregs[1]
+#define UCreg_00 uregs[0]
+#define UCreg_ORIG_00 uregs[33]
+
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _UAPI__UNICORE_PTRACE_H__ */
diff --git a/arch/unicore32/include/asm/sigcontext.h b/arch/unicore32/include/uapi/asm/sigcontext.h
similarity index 100%
rename from arch/unicore32/include/asm/sigcontext.h
rename to arch/unicore32/include/uapi/asm/sigcontext.h
diff --git a/arch/unicore32/include/asm/unistd.h b/arch/unicore32/include/uapi/asm/unistd.h
similarity index 92%
rename from arch/unicore32/include/asm/unistd.h
rename to arch/unicore32/include/uapi/asm/unistd.h
index 2abcf61..d18a3be8 100644
--- a/arch/unicore32/include/asm/unistd.h
+++ b/arch/unicore32/include/uapi/asm/unistd.h
@@ -12,3 +12,4 @@
/* Use the standard ABI for syscalls. */
#include <asm-generic/unistd.h>
+#define __ARCH_WANT_SYS_EXECVE
diff --git a/arch/unicore32/kernel/entry.S b/arch/unicore32/kernel/entry.S
index dcb87ab..7049350 100644
--- a/arch/unicore32/kernel/entry.S
+++ b/arch/unicore32/kernel/entry.S
@@ -573,17 +573,16 @@
*/
ENTRY(ret_from_fork)
b.l schedule_tail
- get_thread_info tsk
- ldw r1, [tsk+], #TI_FLAGS @ check for syscall tracing
- mov why, #1
- cand.a r1, #_TIF_SYSCALL_TRACE @ are we tracing syscalls?
- beq ret_slow_syscall
- mov r1, sp
- mov r0, #1 @ trace exit [IP = 1]
- b.l syscall_trace
b ret_slow_syscall
ENDPROC(ret_from_fork)
+ENTRY(ret_from_kernel_thread)
+ b.l schedule_tail
+ mov r0, r5
+ adr lr, ret_slow_syscall
+ mov pc, r4
+ENDPROC(ret_from_kernel_thread)
+
/*=============================================================================
* SWI handler
*-----------------------------------------------------------------------------
@@ -669,11 +668,6 @@
#endif
.ltorg
-ENTRY(sys_execve)
- add r3, sp, #S_OFF
- b __sys_execve
-ENDPROC(sys_execve)
-
ENTRY(sys_clone)
add ip, sp, #S_OFF
stw ip, [sp+], #4
diff --git a/arch/unicore32/kernel/process.c b/arch/unicore32/kernel/process.c
index b008586..a8fe265 100644
--- a/arch/unicore32/kernel/process.c
+++ b/arch/unicore32/kernel/process.c
@@ -258,6 +258,7 @@
}
asmlinkage void ret_from_fork(void) __asm__("ret_from_fork");
+asmlinkage void ret_from_kernel_thread(void) __asm__("ret_from_kernel_thread");
int
copy_thread(unsigned long clone_flags, unsigned long stack_start,
@@ -266,17 +267,22 @@
struct thread_info *thread = task_thread_info(p);
struct pt_regs *childregs = task_pt_regs(p);
- *childregs = *regs;
- childregs->UCreg_00 = 0;
- childregs->UCreg_sp = stack_start;
-
memset(&thread->cpu_context, 0, sizeof(struct cpu_context_save));
thread->cpu_context.sp = (unsigned long)childregs;
- thread->cpu_context.pc = (unsigned long)ret_from_fork;
+ if (unlikely(!regs)) {
+ thread->cpu_context.pc = (unsigned long)ret_from_kernel_thread;
+ thread->cpu_context.r4 = stack_start;
+ thread->cpu_context.r5 = stk_sz;
+ memset(childregs, 0, sizeof(struct pt_regs));
+ } else {
+ thread->cpu_context.pc = (unsigned long)ret_from_fork;
+ *childregs = *regs;
+ childregs->UCreg_00 = 0;
+ childregs->UCreg_sp = stack_start;
- if (clone_flags & CLONE_SETTLS)
- childregs->UCreg_16 = regs->UCreg_03;
-
+ if (clone_flags & CLONE_SETTLS)
+ childregs->UCreg_16 = regs->UCreg_03;
+ }
return 0;
}
@@ -305,42 +311,6 @@
}
EXPORT_SYMBOL(dump_fpu);
-/*
- * Shuffle the argument into the correct register before calling the
- * thread function. r1 is the thread argument, r2 is the pointer to
- * the thread function, and r3 points to the exit function.
- */
-asm(".pushsection .text\n"
-" .align\n"
-" .type kernel_thread_helper, #function\n"
-"kernel_thread_helper:\n"
-" mov.a asr, r7\n"
-" mov r0, r4\n"
-" mov lr, r6\n"
-" mov pc, r5\n"
-" .size kernel_thread_helper, . - kernel_thread_helper\n"
-" .popsection");
-
-/*
- * Create a kernel thread.
- */
-pid_t kernel_thread(int (*fn)(void *), void *arg, unsigned long flags)
-{
- struct pt_regs regs;
-
- memset(®s, 0, sizeof(regs));
-
- regs.UCreg_04 = (unsigned long)arg;
- regs.UCreg_05 = (unsigned long)fn;
- regs.UCreg_06 = (unsigned long)do_exit;
- regs.UCreg_07 = PRIV_MODE;
- regs.UCreg_pc = (unsigned long)kernel_thread_helper;
- regs.UCreg_asr = regs.UCreg_07 | PSR_I_BIT;
-
- return do_fork(flags|CLONE_VM|CLONE_UNTRACED, 0, ®s, 0, NULL, NULL);
-}
-EXPORT_SYMBOL(kernel_thread);
-
unsigned long get_wchan(struct task_struct *p)
{
struct stackframe frame;
diff --git a/arch/unicore32/kernel/setup.h b/arch/unicore32/kernel/setup.h
index f239550..30f749d 100644
--- a/arch/unicore32/kernel/setup.h
+++ b/arch/unicore32/kernel/setup.h
@@ -30,4 +30,10 @@
extern void kernel_thread_helper(void);
extern void __init early_signal_init(void);
+
+extern asmlinkage void __backtrace(void);
+extern asmlinkage void c_backtrace(unsigned long fp, int pmode);
+
+extern void __show_regs(struct pt_regs *);
+
#endif
diff --git a/arch/unicore32/kernel/sys.c b/arch/unicore32/kernel/sys.c
index fabdee9..9680134 100644
--- a/arch/unicore32/kernel/sys.c
+++ b/arch/unicore32/kernel/sys.c
@@ -42,69 +42,6 @@
parent_tid, child_tid);
}
-/* sys_execve() executes a new program.
- * This is called indirectly via a small wrapper
- */
-asmlinkage long __sys_execve(const char __user *filename,
- const char __user *const __user *argv,
- const char __user *const __user *envp,
- struct pt_regs *regs)
-{
- int error;
- struct filename *fn;
-
- fn = getname(filename);
- error = PTR_ERR(fn);
- if (IS_ERR(fn))
- goto out;
- error = do_execve(fn->name, argv, envp, regs);
- putname(fn);
-out:
- return error;
-}
-
-int kernel_execve(const char *filename,
- const char *const argv[],
- const char *const envp[])
-{
- struct pt_regs regs;
- int ret;
-
- memset(®s, 0, sizeof(struct pt_regs));
- ret = do_execve(filename,
- (const char __user *const __user *)argv,
- (const char __user *const __user *)envp, ®s);
- if (ret < 0)
- goto out;
-
- /*
- * Save argc to the register structure for userspace.
- */
- regs.UCreg_00 = ret;
-
- /*
- * We were successful. We won't be returning to our caller, but
- * instead to user space by manipulating the kernel stack.
- */
- asm("add r0, %0, %1\n\t"
- "mov r1, %2\n\t"
- "mov r2, %3\n\t"
- "mov r22, #0\n\t" /* not a syscall */
- "mov r23, %0\n\t" /* thread structure */
- "b.l memmove\n\t" /* copy regs to top of stack */
- "mov sp, r0\n\t" /* reposition stack pointer */
- "b ret_to_user"
- :
- : "r" (current_thread_info()),
- "Ir" (THREAD_START_SP - sizeof(regs)),
- "r" (®s),
- "Ir" (sizeof(regs))
- : "r0", "r1", "r2", "r3", "ip", "lr", "memory");
-
- out:
- return ret;
-}
-
/* Note: used by the compat code even in 64-bit Linux. */
SYSCALL_DEFINE6(mmap2, unsigned long, addr, unsigned long, len,
unsigned long, prot, unsigned long, flags,
diff --git a/arch/unicore32/mm/fault.c b/arch/unicore32/mm/fault.c
index 2eeb9c0..f9b5c10 100644
--- a/arch/unicore32/mm/fault.c
+++ b/arch/unicore32/mm/fault.c
@@ -168,7 +168,7 @@
}
static int __do_pf(struct mm_struct *mm, unsigned long addr, unsigned int fsr,
- struct task_struct *tsk)
+ unsigned int flags, struct task_struct *tsk)
{
struct vm_area_struct *vma;
int fault;
@@ -194,14 +194,7 @@
* If for any reason at all we couldn't handle the fault, make
* sure we exit gracefully rather than endlessly redo the fault.
*/
- fault = handle_mm_fault(mm, vma, addr & PAGE_MASK,
- (!(fsr ^ 0x12)) ? FAULT_FLAG_WRITE : 0);
- if (unlikely(fault & VM_FAULT_ERROR))
- return fault;
- if (fault & VM_FAULT_MAJOR)
- tsk->maj_flt++;
- else
- tsk->min_flt++;
+ fault = handle_mm_fault(mm, vma, addr & PAGE_MASK, flags);
return fault;
check_stack:
@@ -216,6 +209,8 @@
struct task_struct *tsk;
struct mm_struct *mm;
int fault, sig, code;
+ unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE |
+ ((!(fsr ^ 0x12)) ? FAULT_FLAG_WRITE : 0);
tsk = current;
mm = tsk->mm;
@@ -236,6 +231,7 @@
if (!user_mode(regs)
&& !search_exception_tables(regs->UCreg_pc))
goto no_context;
+retry:
down_read(&mm->mmap_sem);
} else {
/*
@@ -251,7 +247,28 @@
#endif
}
- fault = __do_pf(mm, addr, fsr, tsk);
+ fault = __do_pf(mm, addr, fsr, flags, tsk);
+
+ /* If we need to retry but a fatal signal is pending, handle the
+ * signal first. We do not need to release the mmap_sem because
+ * it would already be released in __lock_page_or_retry in
+ * mm/filemap.c. */
+ if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current))
+ return 0;
+
+ if (!(fault & VM_FAULT_ERROR) && (flags & FAULT_FLAG_ALLOW_RETRY)) {
+ if (fault & VM_FAULT_MAJOR)
+ tsk->maj_flt++;
+ else
+ tsk->min_flt++;
+ if (fault & VM_FAULT_RETRY) {
+ /* Clear FAULT_FLAG_ALLOW_RETRY to avoid any risk
+ * of starvation. */
+ flags &= ~FAULT_FLAG_ALLOW_RETRY;
+ goto retry;
+ }
+ }
+
up_read(&mm->mmap_sem);
/*
diff --git a/arch/x86/boot/compressed/eboot.c b/arch/x86/boot/compressed/eboot.c
index c760e07..e87b0ca 100644
--- a/arch/x86/boot/compressed/eboot.c
+++ b/arch/x86/boot/compressed/eboot.c
@@ -12,6 +12,8 @@
#include <asm/setup.h>
#include <asm/desc.h>
+#undef memcpy /* Use memcpy from misc.c */
+
#include "eboot.h"
static efi_system_table_t *sys_table;
diff --git a/arch/x86/boot/header.S b/arch/x86/boot/header.S
index 2a01744..8c132a6 100644
--- a/arch/x86/boot/header.S
+++ b/arch/x86/boot/header.S
@@ -476,6 +476,3 @@
setup_corrupt:
.byte 7
.string "No setup signature found...\n"
-
- .data
-dummy: .long 0
diff --git a/arch/x86/include/asm/efi.h b/arch/x86/include/asm/efi.h
index c9dcc18..6e8fdf5 100644
--- a/arch/x86/include/asm/efi.h
+++ b/arch/x86/include/asm/efi.h
@@ -35,7 +35,7 @@
#define efi_call_virt6(f, a1, a2, a3, a4, a5, a6) \
efi_call_virt(f, a1, a2, a3, a4, a5, a6)
-#define efi_ioremap(addr, size, type) ioremap_cache(addr, size)
+#define efi_ioremap(addr, size, type, attr) ioremap_cache(addr, size)
#else /* !CONFIG_X86_32 */
@@ -89,7 +89,7 @@
(u64)(a3), (u64)(a4), (u64)(a5), (u64)(a6))
extern void __iomem *efi_ioremap(unsigned long addr, unsigned long size,
- u32 type);
+ u32 type, u64 attribute);
#endif /* CONFIG_X86_32 */
@@ -98,6 +98,8 @@
extern int efi_memblock_x86_reserve_range(void);
extern void efi_call_phys_prelog(void);
extern void efi_call_phys_epilog(void);
+extern void efi_unmap_memmap(void);
+extern void efi_memory_uc(u64 addr, unsigned long size);
#ifndef CONFIG_EFI
/*
diff --git a/arch/x86/include/asm/ptrace.h b/arch/x86/include/asm/ptrace.h
index dcfde52..19f16eb 100644
--- a/arch/x86/include/asm/ptrace.h
+++ b/arch/x86/include/asm/ptrace.h
@@ -205,21 +205,14 @@
}
#endif
-/*
- * X86_32 CPUs don't save ss and esp if the CPU is already in kernel mode
- * when it traps. The previous stack will be directly underneath the saved
- * registers, and 'sp/ss' won't even have been saved. Thus the '®s->sp'.
- *
- * This is valid only for kernel mode traps.
- */
+#ifdef CONFIG_X86_32
+extern unsigned long kernel_stack_pointer(struct pt_regs *regs);
+#else
static inline unsigned long kernel_stack_pointer(struct pt_regs *regs)
{
-#ifdef CONFIG_X86_32
- return (unsigned long)(®s->sp);
-#else
return regs->sp;
-#endif
}
+#endif
#define GET_IP(regs) ((regs)->ip)
#define GET_FP(regs) ((regs)->bp)
diff --git a/arch/x86/include/asm/xen/hypercall.h b/arch/x86/include/asm/xen/hypercall.h
index 59c226d..c20d1ce 100644
--- a/arch/x86/include/asm/xen/hypercall.h
+++ b/arch/x86/include/asm/xen/hypercall.h
@@ -359,18 +359,14 @@
return _hypercall4(int, update_va_mapping, va,
new_val.pte, new_val.pte >> 32, flags);
}
+extern int __must_check xen_event_channel_op_compat(int, void *);
static inline int
HYPERVISOR_event_channel_op(int cmd, void *arg)
{
int rc = _hypercall2(int, event_channel_op, cmd, arg);
- if (unlikely(rc == -ENOSYS)) {
- struct evtchn_op op;
- op.cmd = cmd;
- memcpy(&op.u, arg, sizeof(op.u));
- rc = _hypercall1(int, event_channel_op_compat, &op);
- memcpy(arg, &op.u, sizeof(op.u));
- }
+ if (unlikely(rc == -ENOSYS))
+ rc = xen_event_channel_op_compat(cmd, arg);
return rc;
}
@@ -386,17 +382,14 @@
return _hypercall3(int, console_io, cmd, count, str);
}
+extern int __must_check HYPERVISOR_physdev_op_compat(int, void *);
+
static inline int
HYPERVISOR_physdev_op(int cmd, void *arg)
{
int rc = _hypercall2(int, physdev_op, cmd, arg);
- if (unlikely(rc == -ENOSYS)) {
- struct physdev_op op;
- op.cmd = cmd;
- memcpy(&op.u, arg, sizeof(op.u));
- rc = _hypercall1(int, physdev_op_compat, &op);
- memcpy(arg, &op.u, sizeof(op.u));
- }
+ if (unlikely(rc == -ENOSYS))
+ rc = HYPERVISOR_physdev_op_compat(cmd, arg);
return rc;
}
diff --git a/arch/x86/include/asm/xen/hypervisor.h b/arch/x86/include/asm/xen/hypervisor.h
index 66d0fff..125f344 100644
--- a/arch/x86/include/asm/xen/hypervisor.h
+++ b/arch/x86/include/asm/xen/hypervisor.h
@@ -33,7 +33,6 @@
#ifndef _ASM_X86_XEN_HYPERVISOR_H
#define _ASM_X86_XEN_HYPERVISOR_H
-/* arch/i386/kernel/setup.c */
extern struct shared_info *HYPERVISOR_shared_info;
extern struct start_info *xen_start_info;
diff --git a/arch/x86/include/asm/xen/interface.h b/arch/x86/include/asm/xen/interface.h
index 6d2f75a8..54d52ff 100644
--- a/arch/x86/include/asm/xen/interface.h
+++ b/arch/x86/include/asm/xen/interface.h
@@ -51,14 +51,14 @@
* with Xen so that on ARM we can have one ABI that works for 32 and 64
* bit guests. */
typedef unsigned long xen_pfn_t;
+#define PRI_xen_pfn "lx"
typedef unsigned long xen_ulong_t;
+#define PRI_xen_ulong "lx"
/* Guest handles for primitive C types. */
__DEFINE_GUEST_HANDLE(uchar, unsigned char);
__DEFINE_GUEST_HANDLE(uint, unsigned int);
-__DEFINE_GUEST_HANDLE(ulong, unsigned long);
DEFINE_GUEST_HANDLE(char);
DEFINE_GUEST_HANDLE(int);
-DEFINE_GUEST_HANDLE(long);
DEFINE_GUEST_HANDLE(void);
DEFINE_GUEST_HANDLE(uint64_t);
DEFINE_GUEST_HANDLE(uint32_t);
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index c265593..1817fa9 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -2257,6 +2257,9 @@
continue;
cfg = irq_cfg(irq);
+ if (!cfg)
+ continue;
+
raw_spin_lock(&desc->lock);
/*
diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index f7e98a2..1b7d165 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -631,6 +631,20 @@
}
}
+ /*
+ * The way access filter has a performance penalty on some workloads.
+ * Disable it on the affected CPUs.
+ */
+ if ((c->x86 == 0x15) &&
+ (c->x86_model >= 0x02) && (c->x86_model < 0x20)) {
+ u64 val;
+
+ if (!rdmsrl_safe(0xc0011021, &val) && !(val & 0x1E)) {
+ val |= 0x1E;
+ wrmsrl_safe(0xc0011021, val);
+ }
+ }
+
cpu_detect_cache_sizes(c);
/* Multi core CPU? */
diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd.c b/arch/x86/kernel/cpu/mcheck/mce_amd.c
index 698b6ec..1ac581f 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_amd.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_amd.c
@@ -6,7 +6,7 @@
*
* Written by Jacob Shin - AMD, Inc.
*
- * Support: borislav.petkov@amd.com
+ * Maintained by: Borislav Petkov <bp@alien8.de>
*
* April 2006
* - added support for AMD Family 0x10 processors
diff --git a/arch/x86/kernel/cpu/mcheck/mce_intel.c b/arch/x86/kernel/cpu/mcheck/mce_intel.c
index 5f88abf..4f9a3cb 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_intel.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_intel.c
@@ -285,34 +285,39 @@
raw_spin_unlock_irqrestore(&cmci_discover_lock, flags);
}
+static long cmci_rediscover_work_func(void *arg)
+{
+ int banks;
+
+ /* Recheck banks in case CPUs don't all have the same */
+ if (cmci_supported(&banks))
+ cmci_discover(banks);
+
+ return 0;
+}
+
/*
* After a CPU went down cycle through all the others and rediscover
* Must run in process context.
*/
void cmci_rediscover(int dying)
{
- int banks;
- int cpu;
- cpumask_var_t old;
+ int cpu, banks;
if (!cmci_supported(&banks))
return;
- if (!alloc_cpumask_var(&old, GFP_KERNEL))
- return;
- cpumask_copy(old, ¤t->cpus_allowed);
for_each_online_cpu(cpu) {
if (cpu == dying)
continue;
- if (set_cpus_allowed_ptr(current, cpumask_of(cpu)))
- continue;
- /* Recheck banks in case CPUs don't all have the same */
- if (cmci_supported(&banks))
- cmci_discover(banks);
- }
- set_cpus_allowed_ptr(current, old);
- free_cpumask_var(old);
+ if (cpu == smp_processor_id()) {
+ cmci_rediscover_work_func(NULL);
+ continue;
+ }
+
+ work_on_cpu(cpu, cmci_rediscover_work_func, NULL);
+ }
}
/*
diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c
index 3373f84..4a3374e 100644
--- a/arch/x86/kernel/cpu/perf_event.c
+++ b/arch/x86/kernel/cpu/perf_event.c
@@ -208,12 +208,14 @@
}
/*
- * Now write a value and read it back to see if it matches,
- * this is needed to detect certain hardware emulators (qemu/kvm)
- * that don't trap on the MSR access and always return 0s.
+ * Read the current value, change it and read it back to see if it
+ * matches, this is needed to detect certain hardware emulators
+ * (qemu/kvm) that don't trap on the MSR access and always return 0s.
*/
- val = 0xabcdUL;
reg = x86_pmu_event_addr(0);
+ if (rdmsrl_safe(reg, &val))
+ goto msr_fail;
+ val ^= 0xffffUL;
ret = wrmsrl_safe(reg, val);
ret |= rdmsrl_safe(reg, &val_new);
if (ret || val != val_new)
diff --git a/arch/x86/kernel/cpu/perf_event_intel_uncore.c b/arch/x86/kernel/cpu/perf_event_intel_uncore.c
index 99d96a49..3cf3d97 100644
--- a/arch/x86/kernel/cpu/perf_event_intel_uncore.c
+++ b/arch/x86/kernel/cpu/perf_event_intel_uncore.c
@@ -118,22 +118,24 @@
{
struct pci_dev *pdev = box->pci_dev;
int box_ctl = uncore_pci_box_ctl(box);
- u32 config;
+ u32 config = 0;
- pci_read_config_dword(pdev, box_ctl, &config);
- config |= SNBEP_PMON_BOX_CTL_FRZ;
- pci_write_config_dword(pdev, box_ctl, config);
+ if (!pci_read_config_dword(pdev, box_ctl, &config)) {
+ config |= SNBEP_PMON_BOX_CTL_FRZ;
+ pci_write_config_dword(pdev, box_ctl, config);
+ }
}
static void snbep_uncore_pci_enable_box(struct intel_uncore_box *box)
{
struct pci_dev *pdev = box->pci_dev;
int box_ctl = uncore_pci_box_ctl(box);
- u32 config;
+ u32 config = 0;
- pci_read_config_dword(pdev, box_ctl, &config);
- config &= ~SNBEP_PMON_BOX_CTL_FRZ;
- pci_write_config_dword(pdev, box_ctl, config);
+ if (!pci_read_config_dword(pdev, box_ctl, &config)) {
+ config &= ~SNBEP_PMON_BOX_CTL_FRZ;
+ pci_write_config_dword(pdev, box_ctl, config);
+ }
}
static void snbep_uncore_pci_enable_event(struct intel_uncore_box *box, struct perf_event *event)
@@ -156,7 +158,7 @@
{
struct pci_dev *pdev = box->pci_dev;
struct hw_perf_event *hwc = &event->hw;
- u64 count;
+ u64 count = 0;
pci_read_config_dword(pdev, hwc->event_base, (u32 *)&count);
pci_read_config_dword(pdev, hwc->event_base + 4, (u32 *)&count + 1);
@@ -603,11 +605,12 @@
/*
* build pci bus to socket mapping
*/
-static void snbep_pci2phy_map_init(void)
+static int snbep_pci2phy_map_init(void)
{
struct pci_dev *ubox_dev = NULL;
int i, bus, nodeid;
- u32 config;
+ int err = 0;
+ u32 config = 0;
while (1) {
/* find the UBOX device */
@@ -618,10 +621,14 @@
break;
bus = ubox_dev->bus->number;
/* get the Node ID of the local register */
- pci_read_config_dword(ubox_dev, 0x40, &config);
+ err = pci_read_config_dword(ubox_dev, 0x40, &config);
+ if (err)
+ break;
nodeid = config;
/* get the Node ID mapping */
- pci_read_config_dword(ubox_dev, 0x54, &config);
+ err = pci_read_config_dword(ubox_dev, 0x54, &config);
+ if (err)
+ break;
/*
* every three bits in the Node ID mapping register maps
* to a particular node.
@@ -633,7 +640,11 @@
}
}
};
- return;
+
+ if (ubox_dev)
+ pci_dev_put(ubox_dev);
+
+ return err ? pcibios_err_to_errno(err) : 0;
}
/* end of Sandy Bridge-EP uncore support */
@@ -1547,7 +1558,6 @@
{
struct hw_perf_event *hwc = &event->hw;
struct hw_perf_event_extra *reg1 = &hwc->extra_reg;
- int port;
/* adjust the main event selector and extra register index */
if (reg1->idx % 2) {
@@ -1559,7 +1569,6 @@
}
/* adjust extra register config */
- port = reg1->idx / 6 + box->pmu->pmu_idx * 4;
switch (reg1->idx % 6) {
case 2:
/* shift the 8~15 bits to the 0~7 bits */
@@ -2578,9 +2587,11 @@
switch (boot_cpu_data.x86_model) {
case 45: /* Sandy Bridge-EP */
+ ret = snbep_pci2phy_map_init();
+ if (ret)
+ return ret;
pci_uncores = snbep_pci_uncores;
uncore_pci_driver = &snbep_uncore_pci_driver;
- snbep_pci2phy_map_init();
break;
default:
return 0;
@@ -2926,6 +2937,9 @@
if (boot_cpu_data.x86_vendor != X86_VENDOR_INTEL)
return -ENODEV;
+ if (cpu_has_hypervisor)
+ return -ENODEV;
+
ret = uncore_pci_init();
if (ret)
goto fail;
diff --git a/arch/x86/kernel/cpu/perf_event_knc.c b/arch/x86/kernel/cpu/perf_event_knc.c
index 7c46bfd..4b7731b 100644
--- a/arch/x86/kernel/cpu/perf_event_knc.c
+++ b/arch/x86/kernel/cpu/perf_event_knc.c
@@ -3,6 +3,8 @@
#include <linux/perf_event.h>
#include <linux/types.h>
+#include <asm/hardirq.h>
+
#include "perf_event.h"
static const u64 knc_perfmon_event_map[] =
@@ -173,30 +175,100 @@
static inline void
knc_pmu_disable_event(struct perf_event *event)
{
- struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
struct hw_perf_event *hwc = &event->hw;
u64 val;
val = hwc->config;
- if (cpuc->enabled)
- val &= ~ARCH_PERFMON_EVENTSEL_ENABLE;
+ val &= ~ARCH_PERFMON_EVENTSEL_ENABLE;
(void)wrmsrl_safe(hwc->config_base + hwc->idx, val);
}
static void knc_pmu_enable_event(struct perf_event *event)
{
- struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
struct hw_perf_event *hwc = &event->hw;
u64 val;
val = hwc->config;
- if (cpuc->enabled)
- val |= ARCH_PERFMON_EVENTSEL_ENABLE;
+ val |= ARCH_PERFMON_EVENTSEL_ENABLE;
(void)wrmsrl_safe(hwc->config_base + hwc->idx, val);
}
+static inline u64 knc_pmu_get_status(void)
+{
+ u64 status;
+
+ rdmsrl(MSR_KNC_IA32_PERF_GLOBAL_STATUS, status);
+
+ return status;
+}
+
+static inline void knc_pmu_ack_status(u64 ack)
+{
+ wrmsrl(MSR_KNC_IA32_PERF_GLOBAL_OVF_CONTROL, ack);
+}
+
+static int knc_pmu_handle_irq(struct pt_regs *regs)
+{
+ struct perf_sample_data data;
+ struct cpu_hw_events *cpuc;
+ int handled = 0;
+ int bit, loops;
+ u64 status;
+
+ cpuc = &__get_cpu_var(cpu_hw_events);
+
+ knc_pmu_disable_all();
+
+ status = knc_pmu_get_status();
+ if (!status) {
+ knc_pmu_enable_all(0);
+ return handled;
+ }
+
+ loops = 0;
+again:
+ knc_pmu_ack_status(status);
+ if (++loops > 100) {
+ WARN_ONCE(1, "perf: irq loop stuck!\n");
+ perf_event_print_debug();
+ goto done;
+ }
+
+ inc_irq_stat(apic_perf_irqs);
+
+ for_each_set_bit(bit, (unsigned long *)&status, X86_PMC_IDX_MAX) {
+ struct perf_event *event = cpuc->events[bit];
+
+ handled++;
+
+ if (!test_bit(bit, cpuc->active_mask))
+ continue;
+
+ if (!intel_pmu_save_and_restart(event))
+ continue;
+
+ perf_sample_data_init(&data, 0, event->hw.last_period);
+
+ if (perf_event_overflow(event, &data, regs))
+ x86_pmu_stop(event, 0);
+ }
+
+ /*
+ * Repeat if there is more work to be done:
+ */
+ status = knc_pmu_get_status();
+ if (status)
+ goto again;
+
+done:
+ knc_pmu_enable_all(0);
+
+ return handled;
+}
+
+
PMU_FORMAT_ATTR(event, "config:0-7" );
PMU_FORMAT_ATTR(umask, "config:8-15" );
PMU_FORMAT_ATTR(edge, "config:18" );
@@ -214,7 +286,7 @@
static __initconst struct x86_pmu knc_pmu = {
.name = "knc",
- .handle_irq = x86_pmu_handle_irq,
+ .handle_irq = knc_pmu_handle_irq,
.disable_all = knc_pmu_disable_all,
.enable_all = knc_pmu_enable_all,
.enable = knc_pmu_enable_event,
@@ -226,12 +298,11 @@
.event_map = knc_pmu_event_map,
.max_events = ARRAY_SIZE(knc_perfmon_event_map),
.apic = 1,
- .max_period = (1ULL << 31) - 1,
+ .max_period = (1ULL << 39) - 1,
.version = 0,
.num_counters = 2,
- /* in theory 40 bits, early silicon is buggy though */
- .cntval_bits = 32,
- .cntval_mask = (1ULL << 32) - 1,
+ .cntval_bits = 40,
+ .cntval_mask = (1ULL << 40) - 1,
.get_event_constraints = x86_get_event_constraints,
.event_constraints = knc_event_constraints,
.format_attrs = intel_knc_formats_attr,
diff --git a/arch/x86/kernel/cpu/perf_event_p6.c b/arch/x86/kernel/cpu/perf_event_p6.c
index e4dd0f7..7d0270b 100644
--- a/arch/x86/kernel/cpu/perf_event_p6.c
+++ b/arch/x86/kernel/cpu/perf_event_p6.c
@@ -8,13 +8,106 @@
*/
static const u64 p6_perfmon_event_map[] =
{
- [PERF_COUNT_HW_CPU_CYCLES] = 0x0079,
- [PERF_COUNT_HW_INSTRUCTIONS] = 0x00c0,
- [PERF_COUNT_HW_CACHE_REFERENCES] = 0x0f2e,
- [PERF_COUNT_HW_CACHE_MISSES] = 0x012e,
- [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = 0x00c4,
- [PERF_COUNT_HW_BRANCH_MISSES] = 0x00c5,
- [PERF_COUNT_HW_BUS_CYCLES] = 0x0062,
+ [PERF_COUNT_HW_CPU_CYCLES] = 0x0079, /* CPU_CLK_UNHALTED */
+ [PERF_COUNT_HW_INSTRUCTIONS] = 0x00c0, /* INST_RETIRED */
+ [PERF_COUNT_HW_CACHE_REFERENCES] = 0x0f2e, /* L2_RQSTS:M:E:S:I */
+ [PERF_COUNT_HW_CACHE_MISSES] = 0x012e, /* L2_RQSTS:I */
+ [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = 0x00c4, /* BR_INST_RETIRED */
+ [PERF_COUNT_HW_BRANCH_MISSES] = 0x00c5, /* BR_MISS_PRED_RETIRED */
+ [PERF_COUNT_HW_BUS_CYCLES] = 0x0062, /* BUS_DRDY_CLOCKS */
+ [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = 0x00a2, /* RESOURCE_STALLS */
+
+};
+
+static __initconst u64 p6_hw_cache_event_ids
+ [PERF_COUNT_HW_CACHE_MAX]
+ [PERF_COUNT_HW_CACHE_OP_MAX]
+ [PERF_COUNT_HW_CACHE_RESULT_MAX] =
+{
+ [ C(L1D) ] = {
+ [ C(OP_READ) ] = {
+ [ C(RESULT_ACCESS) ] = 0x0043, /* DATA_MEM_REFS */
+ [ C(RESULT_MISS) ] = 0x0045, /* DCU_LINES_IN */
+ },
+ [ C(OP_WRITE) ] = {
+ [ C(RESULT_ACCESS) ] = 0,
+ [ C(RESULT_MISS) ] = 0x0f29, /* L2_LD:M:E:S:I */
+ },
+ [ C(OP_PREFETCH) ] = {
+ [ C(RESULT_ACCESS) ] = 0,
+ [ C(RESULT_MISS) ] = 0,
+ },
+ },
+ [ C(L1I ) ] = {
+ [ C(OP_READ) ] = {
+ [ C(RESULT_ACCESS) ] = 0x0080, /* IFU_IFETCH */
+ [ C(RESULT_MISS) ] = 0x0f28, /* L2_IFETCH:M:E:S:I */
+ },
+ [ C(OP_WRITE) ] = {
+ [ C(RESULT_ACCESS) ] = -1,
+ [ C(RESULT_MISS) ] = -1,
+ },
+ [ C(OP_PREFETCH) ] = {
+ [ C(RESULT_ACCESS) ] = 0,
+ [ C(RESULT_MISS) ] = 0,
+ },
+ },
+ [ C(LL ) ] = {
+ [ C(OP_READ) ] = {
+ [ C(RESULT_ACCESS) ] = 0,
+ [ C(RESULT_MISS) ] = 0,
+ },
+ [ C(OP_WRITE) ] = {
+ [ C(RESULT_ACCESS) ] = 0,
+ [ C(RESULT_MISS) ] = 0x0025, /* L2_M_LINES_INM */
+ },
+ [ C(OP_PREFETCH) ] = {
+ [ C(RESULT_ACCESS) ] = 0,
+ [ C(RESULT_MISS) ] = 0,
+ },
+ },
+ [ C(DTLB) ] = {
+ [ C(OP_READ) ] = {
+ [ C(RESULT_ACCESS) ] = 0x0043, /* DATA_MEM_REFS */
+ [ C(RESULT_MISS) ] = 0,
+ },
+ [ C(OP_WRITE) ] = {
+ [ C(RESULT_ACCESS) ] = 0,
+ [ C(RESULT_MISS) ] = 0,
+ },
+ [ C(OP_PREFETCH) ] = {
+ [ C(RESULT_ACCESS) ] = 0,
+ [ C(RESULT_MISS) ] = 0,
+ },
+ },
+ [ C(ITLB) ] = {
+ [ C(OP_READ) ] = {
+ [ C(RESULT_ACCESS) ] = 0x0080, /* IFU_IFETCH */
+ [ C(RESULT_MISS) ] = 0x0085, /* ITLB_MISS */
+ },
+ [ C(OP_WRITE) ] = {
+ [ C(RESULT_ACCESS) ] = -1,
+ [ C(RESULT_MISS) ] = -1,
+ },
+ [ C(OP_PREFETCH) ] = {
+ [ C(RESULT_ACCESS) ] = -1,
+ [ C(RESULT_MISS) ] = -1,
+ },
+ },
+ [ C(BPU ) ] = {
+ [ C(OP_READ) ] = {
+ [ C(RESULT_ACCESS) ] = 0x00c4, /* BR_INST_RETIRED */
+ [ C(RESULT_MISS) ] = 0x00c5, /* BR_MISS_PRED_RETIRED */
+ },
+ [ C(OP_WRITE) ] = {
+ [ C(RESULT_ACCESS) ] = -1,
+ [ C(RESULT_MISS) ] = -1,
+ },
+ [ C(OP_PREFETCH) ] = {
+ [ C(RESULT_ACCESS) ] = -1,
+ [ C(RESULT_MISS) ] = -1,
+ },
+ },
};
static u64 p6_pmu_event_map(int hw_event)
@@ -34,7 +127,7 @@
{
INTEL_EVENT_CONSTRAINT(0xc1, 0x1), /* FLOPS */
INTEL_EVENT_CONSTRAINT(0x10, 0x1), /* FP_COMP_OPS_EXE */
- INTEL_EVENT_CONSTRAINT(0x11, 0x1), /* FP_ASSIST */
+ INTEL_EVENT_CONSTRAINT(0x11, 0x2), /* FP_ASSIST */
INTEL_EVENT_CONSTRAINT(0x12, 0x2), /* MUL */
INTEL_EVENT_CONSTRAINT(0x13, 0x2), /* DIV */
INTEL_EVENT_CONSTRAINT(0x14, 0x1), /* CYCLES_DIV_BUSY */
@@ -64,25 +157,25 @@
static inline void
p6_pmu_disable_event(struct perf_event *event)
{
- struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
struct hw_perf_event *hwc = &event->hw;
u64 val = P6_NOP_EVENT;
- if (cpuc->enabled)
- val |= ARCH_PERFMON_EVENTSEL_ENABLE;
-
(void)wrmsrl_safe(hwc->config_base, val);
}
static void p6_pmu_enable_event(struct perf_event *event)
{
- struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
struct hw_perf_event *hwc = &event->hw;
u64 val;
val = hwc->config;
- if (cpuc->enabled)
- val |= ARCH_PERFMON_EVENTSEL_ENABLE;
+
+ /*
+ * p6 only has a global event enable, set on PerfEvtSel0
+ * We "disable" events by programming P6_NOP_EVENT
+ * and we rely on p6_pmu_enable_all() being called
+ * to actually enable the events.
+ */
(void)wrmsrl_safe(hwc->config_base, val);
}
@@ -158,5 +251,9 @@
x86_pmu = p6_pmu;
+ memcpy(hw_cache_event_ids, p6_hw_cache_event_ids,
+ sizeof(hw_cache_event_ids));
+
+
return 0;
}
diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c
index ed858e9..df06ade 100644
--- a/arch/x86/kernel/e820.c
+++ b/arch/x86/kernel/e820.c
@@ -1077,6 +1077,9 @@
memblock_add(ei->addr, ei->size);
}
+ /* throw away partial pages */
+ memblock_trim_memory(PAGE_SIZE);
+
memblock_dump_all();
}
diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S
index a1193ae..88b725a 100644
--- a/arch/x86/kernel/entry_32.S
+++ b/arch/x86/kernel/entry_32.S
@@ -1035,7 +1035,7 @@
ENTRY(xen_hypervisor_callback)
CFI_STARTPROC
- pushl_cfi $0
+ pushl_cfi $-1 /* orig_ax = -1 => not a system call */
SAVE_ALL
TRACE_IRQS_OFF
@@ -1077,14 +1077,16 @@
2: mov 8(%esp),%es
3: mov 12(%esp),%fs
4: mov 16(%esp),%gs
+ /* EAX == 0 => Category 1 (Bad segment)
+ EAX != 0 => Category 2 (Bad IRET) */
testl %eax,%eax
popl_cfi %eax
lea 16(%esp),%esp
CFI_ADJUST_CFA_OFFSET -16
jz 5f
addl $16,%esp
- jmp iret_exc # EAX != 0 => Category 2 (Bad IRET)
-5: pushl_cfi $0 # EAX == 0 => Category 1 (Bad segment)
+ jmp iret_exc
+5: pushl_cfi $-1 /* orig_ax = -1 => not a system call */
SAVE_ALL
jmp ret_from_exception
CFI_ENDPROC
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index 0c58952d..1328fe4 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -995,8 +995,8 @@
*/
.p2align CONFIG_X86_L1_CACHE_SHIFT
common_interrupt:
- ASM_CLAC
XCPT_FRAME
+ ASM_CLAC
addq $-0x80,(%rsp) /* Adjust vector to [-256,-1] range */
interrupt do_IRQ
/* 0(%rsp): old_rsp-ARGOFFSET */
@@ -1135,8 +1135,8 @@
*/
.macro apicinterrupt num sym do_sym
ENTRY(\sym)
- ASM_CLAC
INTR_FRAME
+ ASM_CLAC
pushq_cfi $~(\num)
.Lcommon_\sym:
interrupt \do_sym
@@ -1190,8 +1190,8 @@
*/
.macro zeroentry sym do_sym
ENTRY(\sym)
- ASM_CLAC
INTR_FRAME
+ ASM_CLAC
PARAVIRT_ADJUST_EXCEPTION_FRAME
pushq_cfi $-1 /* ORIG_RAX: no syscall to restart */
subq $ORIG_RAX-R15, %rsp
@@ -1208,8 +1208,8 @@
.macro paranoidzeroentry sym do_sym
ENTRY(\sym)
- ASM_CLAC
INTR_FRAME
+ ASM_CLAC
PARAVIRT_ADJUST_EXCEPTION_FRAME
pushq_cfi $-1 /* ORIG_RAX: no syscall to restart */
subq $ORIG_RAX-R15, %rsp
@@ -1227,8 +1227,8 @@
#define INIT_TSS_IST(x) PER_CPU_VAR(init_tss) + (TSS_ist + ((x) - 1) * 8)
.macro paranoidzeroentry_ist sym do_sym ist
ENTRY(\sym)
- ASM_CLAC
INTR_FRAME
+ ASM_CLAC
PARAVIRT_ADJUST_EXCEPTION_FRAME
pushq_cfi $-1 /* ORIG_RAX: no syscall to restart */
subq $ORIG_RAX-R15, %rsp
@@ -1247,8 +1247,8 @@
.macro errorentry sym do_sym
ENTRY(\sym)
- ASM_CLAC
XCPT_FRAME
+ ASM_CLAC
PARAVIRT_ADJUST_EXCEPTION_FRAME
subq $ORIG_RAX-R15, %rsp
CFI_ADJUST_CFA_OFFSET ORIG_RAX-R15
@@ -1266,8 +1266,8 @@
/* error code is on the stack already */
.macro paranoiderrorentry sym do_sym
ENTRY(\sym)
- ASM_CLAC
XCPT_FRAME
+ ASM_CLAC
PARAVIRT_ADJUST_EXCEPTION_FRAME
subq $ORIG_RAX-R15, %rsp
CFI_ADJUST_CFA_OFFSET ORIG_RAX-R15
@@ -1435,7 +1435,7 @@
CFI_RESTORE r11
addq $0x30,%rsp
CFI_ADJUST_CFA_OFFSET -0x30
- pushq_cfi $0
+ pushq_cfi $-1 /* orig_ax = -1 => not a system call */
SAVE_ALL
jmp error_exit
CFI_ENDPROC
diff --git a/arch/x86/kernel/kvm.c b/arch/x86/kernel/kvm.c
index b3e5e51..4180a87 100644
--- a/arch/x86/kernel/kvm.c
+++ b/arch/x86/kernel/kvm.c
@@ -247,7 +247,10 @@
break;
case KVM_PV_REASON_PAGE_NOT_PRESENT:
/* page is swapped out by the host. */
+ rcu_irq_enter();
+ exit_idle();
kvm_async_pf_task_wait((u32)read_cr2());
+ rcu_irq_exit();
break;
case KVM_PV_REASON_PAGE_READY:
rcu_irq_enter();
diff --git a/arch/x86/kernel/microcode_amd.c b/arch/x86/kernel/microcode_amd.c
index 7720ff5..efdec7c 100644
--- a/arch/x86/kernel/microcode_amd.c
+++ b/arch/x86/kernel/microcode_amd.c
@@ -8,8 +8,8 @@
* Tigran Aivazian <tigran@aivazian.fsnet.co.uk>
*
* Maintainers:
- * Andreas Herrmann <andreas.herrmann3@amd.com>
- * Borislav Petkov <borislav.petkov@amd.com>
+ * Andreas Herrmann <herrmann.der.user@googlemail.com>
+ * Borislav Petkov <bp@alien8.de>
*
* This driver allows to upgrade microcode on F10h AMD
* CPUs and later.
@@ -190,6 +190,7 @@
#define F1XH_MPB_MAX_SIZE 2048
#define F14H_MPB_MAX_SIZE 1824
#define F15H_MPB_MAX_SIZE 4096
+#define F16H_MPB_MAX_SIZE 3458
switch (c->x86) {
case 0x14:
@@ -198,6 +199,9 @@
case 0x15:
max_size = F15H_MPB_MAX_SIZE;
break;
+ case 0x16:
+ max_size = F16H_MPB_MAX_SIZE;
+ break;
default:
max_size = F1XH_MPB_MAX_SIZE;
break;
diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c
index b00b33a..5e0596b 100644
--- a/arch/x86/kernel/ptrace.c
+++ b/arch/x86/kernel/ptrace.c
@@ -22,6 +22,7 @@
#include <linux/perf_event.h>
#include <linux/hw_breakpoint.h>
#include <linux/rcupdate.h>
+#include <linux/module.h>
#include <asm/uaccess.h>
#include <asm/pgtable.h>
@@ -166,6 +167,35 @@
#define FLAG_MASK FLAG_MASK_32
+/*
+ * X86_32 CPUs don't save ss and esp if the CPU is already in kernel mode
+ * when it traps. The previous stack will be directly underneath the saved
+ * registers, and 'sp/ss' won't even have been saved. Thus the '®s->sp'.
+ *
+ * Now, if the stack is empty, '®s->sp' is out of range. In this
+ * case we try to take the previous stack. To always return a non-null
+ * stack pointer we fall back to regs as stack if no previous stack
+ * exists.
+ *
+ * This is valid only for kernel mode traps.
+ */
+unsigned long kernel_stack_pointer(struct pt_regs *regs)
+{
+ unsigned long context = (unsigned long)regs & ~(THREAD_SIZE - 1);
+ unsigned long sp = (unsigned long)®s->sp;
+ struct thread_info *tinfo;
+
+ if (context == (sp & ~(THREAD_SIZE - 1)))
+ return sp;
+
+ tinfo = (struct thread_info *)context;
+ if (tinfo->previous_esp)
+ return tinfo->previous_esp;
+
+ return (unsigned long)regs;
+}
+EXPORT_SYMBOL_GPL(kernel_stack_pointer);
+
static unsigned long *pt_regs_access(struct pt_regs *regs, unsigned long regno)
{
BUILD_BUG_ON(offsetof(struct pt_regs, bx) != 0);
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 468e98d..ca45696 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -921,18 +921,19 @@
#ifdef CONFIG_X86_64
if (max_pfn > max_low_pfn) {
int i;
- for (i = 0; i < e820.nr_map; i++) {
- struct e820entry *ei = &e820.map[i];
+ unsigned long start, end;
+ unsigned long start_pfn, end_pfn;
- if (ei->addr + ei->size <= 1UL << 32)
+ for_each_mem_pfn_range(i, MAX_NUMNODES, &start_pfn, &end_pfn,
+ NULL) {
+
+ end = PFN_PHYS(end_pfn);
+ if (end <= (1UL<<32))
continue;
- if (ei->type == E820_RESERVED)
- continue;
-
+ start = PFN_PHYS(start_pfn);
max_pfn_mapped = init_memory_mapping(
- ei->addr < 1UL << 32 ? 1UL << 32 : ei->addr,
- ei->addr + ei->size);
+ max((1UL<<32), start), end);
}
/* can we preseve max_low_pfn ?*/
@@ -1048,6 +1049,18 @@
arch_init_ideal_nops();
register_refined_jiffies(CLOCK_TICK_RATE);
+
+#ifdef CONFIG_EFI
+ /* Once setup is done above, disable efi_enabled on mismatched
+ * firmware/kernel archtectures since there is no support for
+ * runtime services.
+ */
+ if (efi_enabled && IS_ENABLED(CONFIG_X86_64) != efi_64bit) {
+ pr_info("efi: Setup done, disabling due to 32/64-bit mismatch\n");
+ efi_unmap_memmap();
+ efi_enabled = 0;
+ }
+#endif
}
#ifdef CONFIG_X86_32
diff --git a/arch/x86/kernel/signal.c b/arch/x86/kernel/signal.c
index 29ad351..70b27ee 100644
--- a/arch/x86/kernel/signal.c
+++ b/arch/x86/kernel/signal.c
@@ -824,10 +824,8 @@
mce_notify_process();
#endif /* CONFIG_X86_64 && CONFIG_X86_MCE */
- if (thread_info_flags & _TIF_UPROBE) {
- clear_thread_flag(TIF_UPROBE);
+ if (thread_info_flags & _TIF_UPROBE)
uprobe_notify_resume(regs);
- }
/* deal with pending signal delivery */
if (thread_info_flags & _TIF_SIGPENDING)
diff --git a/arch/x86/kernel/uprobes.c b/arch/x86/kernel/uprobes.c
index 9538f00..aafa555 100644
--- a/arch/x86/kernel/uprobes.c
+++ b/arch/x86/kernel/uprobes.c
@@ -651,31 +651,19 @@
/*
* Skip these instructions as per the currently known x86 ISA.
- * 0x66* { 0x90 | 0x0f 0x1f | 0x0f 0x19 | 0x87 0xc0 }
+ * rep=0x66*; nop=0x90
*/
static bool __skip_sstep(struct arch_uprobe *auprobe, struct pt_regs *regs)
{
int i;
for (i = 0; i < MAX_UINSN_BYTES; i++) {
- if ((auprobe->insn[i] == 0x66))
+ if (auprobe->insn[i] == 0x66)
continue;
if (auprobe->insn[i] == 0x90)
return true;
- if (i == (MAX_UINSN_BYTES - 1))
- break;
-
- if ((auprobe->insn[i] == 0x0f) && (auprobe->insn[i+1] == 0x1f))
- return true;
-
- if ((auprobe->insn[i] == 0x0f) && (auprobe->insn[i+1] == 0x19))
- return true;
-
- if ((auprobe->insn[i] == 0x87) && (auprobe->insn[i+1] == 0xc0))
- return true;
-
break;
}
return false;
diff --git a/arch/x86/kvm/cpuid.h b/arch/x86/kvm/cpuid.h
index a10e460..58fc514 100644
--- a/arch/x86/kvm/cpuid.h
+++ b/arch/x86/kvm/cpuid.h
@@ -24,6 +24,9 @@
{
struct kvm_cpuid_entry2 *best;
+ if (!static_cpu_has(X86_FEATURE_XSAVE))
+ return 0;
+
best = kvm_find_cpuid_entry(vcpu, 1, 0);
return best && (best->ecx & bit(X86_FEATURE_XSAVE));
}
diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index c6e6b72..43e9fad 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -1311,7 +1311,7 @@
vcpu->arch.apic_base = value;
if (apic_x2apic_mode(apic)) {
u32 id = kvm_apic_id(apic);
- u32 ldr = ((id & ~0xf) << 16) | (1 << (id & 0xf));
+ u32 ldr = ((id >> 4) << 16) | (1 << (id & 0xf));
kvm_apic_set_ldr(apic, ldr);
}
apic->base_address = apic->vcpu->arch.apic_base &
diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index d289fee..6f85fe0 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -2497,8 +2497,7 @@
}
}
- if (!is_error_pfn(pfn))
- kvm_release_pfn_clean(pfn);
+ kvm_release_pfn_clean(pfn);
}
static void nonpaging_new_cr3(struct kvm_vcpu *vcpu)
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index ad6b1dd..f858159 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -6549,19 +6549,22 @@
}
}
- exec_control = vmcs_read32(SECONDARY_VM_EXEC_CONTROL);
/* Exposing INVPCID only when PCID is exposed */
best = kvm_find_cpuid_entry(vcpu, 0x7, 0);
if (vmx_invpcid_supported() &&
best && (best->ebx & bit(X86_FEATURE_INVPCID)) &&
guest_cpuid_has_pcid(vcpu)) {
+ exec_control = vmcs_read32(SECONDARY_VM_EXEC_CONTROL);
exec_control |= SECONDARY_EXEC_ENABLE_INVPCID;
vmcs_write32(SECONDARY_VM_EXEC_CONTROL,
exec_control);
} else {
- exec_control &= ~SECONDARY_EXEC_ENABLE_INVPCID;
- vmcs_write32(SECONDARY_VM_EXEC_CONTROL,
- exec_control);
+ if (cpu_has_secondary_exec_ctrls()) {
+ exec_control = vmcs_read32(SECONDARY_VM_EXEC_CONTROL);
+ exec_control &= ~SECONDARY_EXEC_ENABLE_INVPCID;
+ vmcs_write32(SECONDARY_VM_EXEC_CONTROL,
+ exec_control);
+ }
if (best)
best->ebx &= ~bit(X86_FEATURE_INVPCID);
}
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 1eefebe..4f76417 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -3779,7 +3779,7 @@
{
struct kvm_mmio_fragment *frag = &vcpu->mmio_fragments[0];
- memcpy(vcpu->run->mmio.data, frag->data, frag->len);
+ memcpy(vcpu->run->mmio.data, frag->data, min(8u, frag->len));
return X86EMUL_CONTINUE;
}
@@ -3832,18 +3832,11 @@
bytes -= handled;
val += handled;
- while (bytes) {
- unsigned now = min(bytes, 8U);
-
- frag = &vcpu->mmio_fragments[vcpu->mmio_nr_fragments++];
- frag->gpa = gpa;
- frag->data = val;
- frag->len = now;
-
- gpa += now;
- val += now;
- bytes -= now;
- }
+ WARN_ON(vcpu->mmio_nr_fragments >= KVM_MAX_MMIO_FRAGMENTS);
+ frag = &vcpu->mmio_fragments[vcpu->mmio_nr_fragments++];
+ frag->gpa = gpa;
+ frag->data = val;
+ frag->len = bytes;
return X86EMUL_CONTINUE;
}
@@ -3890,7 +3883,7 @@
vcpu->mmio_needed = 1;
vcpu->mmio_cur_fragment = 0;
- vcpu->run->mmio.len = vcpu->mmio_fragments[0].len;
+ vcpu->run->mmio.len = min(8u, vcpu->mmio_fragments[0].len);
vcpu->run->mmio.is_write = vcpu->mmio_is_write = ops->write;
vcpu->run->exit_reason = KVM_EXIT_MMIO;
vcpu->run->mmio.phys_addr = gpa;
@@ -5522,28 +5515,44 @@
*
* read:
* for each fragment
- * write gpa, len
- * exit
- * copy data
+ * for each mmio piece in the fragment
+ * write gpa, len
+ * exit
+ * copy data
* execute insn
*
* write:
* for each fragment
- * write gpa, len
- * copy data
- * exit
+ * for each mmio piece in the fragment
+ * write gpa, len
+ * copy data
+ * exit
*/
static int complete_emulated_mmio(struct kvm_vcpu *vcpu)
{
struct kvm_run *run = vcpu->run;
struct kvm_mmio_fragment *frag;
+ unsigned len;
BUG_ON(!vcpu->mmio_needed);
/* Complete previous fragment */
- frag = &vcpu->mmio_fragments[vcpu->mmio_cur_fragment++];
+ frag = &vcpu->mmio_fragments[vcpu->mmio_cur_fragment];
+ len = min(8u, frag->len);
if (!vcpu->mmio_is_write)
- memcpy(frag->data, run->mmio.data, frag->len);
+ memcpy(frag->data, run->mmio.data, len);
+
+ if (frag->len <= 8) {
+ /* Switch to the next fragment. */
+ frag++;
+ vcpu->mmio_cur_fragment++;
+ } else {
+ /* Go forward to the next mmio piece. */
+ frag->data += len;
+ frag->gpa += len;
+ frag->len -= len;
+ }
+
if (vcpu->mmio_cur_fragment == vcpu->mmio_nr_fragments) {
vcpu->mmio_needed = 0;
if (vcpu->mmio_is_write)
@@ -5551,13 +5560,12 @@
vcpu->mmio_read_completed = 1;
return complete_emulated_io(vcpu);
}
- /* Initiate next fragment */
- ++frag;
+
run->exit_reason = KVM_EXIT_MMIO;
run->mmio.phys_addr = frag->gpa;
if (vcpu->mmio_is_write)
- memcpy(run->mmio.data, frag->data, frag->len);
- run->mmio.len = frag->len;
+ memcpy(run->mmio.data, frag->data, min(8u, frag->len));
+ run->mmio.len = min(8u, frag->len);
run->mmio.is_write = vcpu->mmio_is_write;
vcpu->arch.complete_userspace_io = complete_emulated_mmio;
return 0;
@@ -5773,6 +5781,9 @@
int pending_vec, max_bits, idx;
struct desc_ptr dt;
+ if (!guest_cpuid_has_xsave(vcpu) && (sregs->cr4 & X86_CR4_OSXSAVE))
+ return -EINVAL;
+
dt.size = sregs->idt.limit;
dt.address = sregs->idt.base;
kvm_x86_ops->set_idt(vcpu, &dt);
diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c
index ab1f6a9..d7aea41 100644
--- a/arch/x86/mm/init.c
+++ b/arch/x86/mm/init.c
@@ -35,40 +35,44 @@
unsigned page_size_mask;
};
-static void __init find_early_table_space(struct map_range *mr, unsigned long end,
- int use_pse, int use_gbpages)
+/*
+ * First calculate space needed for kernel direct mapping page tables to cover
+ * mr[0].start to mr[nr_range - 1].end, while accounting for possible 2M and 1GB
+ * pages. Then find enough contiguous space for those page tables.
+ */
+static void __init find_early_table_space(struct map_range *mr, int nr_range)
{
- unsigned long puds, pmds, ptes, tables, start = 0, good_end = end;
+ int i;
+ unsigned long puds = 0, pmds = 0, ptes = 0, tables;
+ unsigned long start = 0, good_end;
phys_addr_t base;
- puds = (end + PUD_SIZE - 1) >> PUD_SHIFT;
- tables = roundup(puds * sizeof(pud_t), PAGE_SIZE);
+ for (i = 0; i < nr_range; i++) {
+ unsigned long range, extra;
- if (use_gbpages) {
- unsigned long extra;
+ range = mr[i].end - mr[i].start;
+ puds += (range + PUD_SIZE - 1) >> PUD_SHIFT;
- extra = end - ((end>>PUD_SHIFT) << PUD_SHIFT);
- pmds = (extra + PMD_SIZE - 1) >> PMD_SHIFT;
- } else
- pmds = (end + PMD_SIZE - 1) >> PMD_SHIFT;
+ if (mr[i].page_size_mask & (1 << PG_LEVEL_1G)) {
+ extra = range - ((range >> PUD_SHIFT) << PUD_SHIFT);
+ pmds += (extra + PMD_SIZE - 1) >> PMD_SHIFT;
+ } else {
+ pmds += (range + PMD_SIZE - 1) >> PMD_SHIFT;
+ }
- tables += roundup(pmds * sizeof(pmd_t), PAGE_SIZE);
-
- if (use_pse) {
- unsigned long extra;
-
- extra = end - ((end>>PMD_SHIFT) << PMD_SHIFT);
+ if (mr[i].page_size_mask & (1 << PG_LEVEL_2M)) {
+ extra = range - ((range >> PMD_SHIFT) << PMD_SHIFT);
#ifdef CONFIG_X86_32
- extra += PMD_SIZE;
+ extra += PMD_SIZE;
#endif
- /* The first 2/4M doesn't use large pages. */
- if (mr->start < PMD_SIZE)
- extra += mr->end - mr->start;
+ ptes += (extra + PAGE_SIZE - 1) >> PAGE_SHIFT;
+ } else {
+ ptes += (range + PAGE_SIZE - 1) >> PAGE_SHIFT;
+ }
+ }
- ptes = (extra + PAGE_SIZE - 1) >> PAGE_SHIFT;
- } else
- ptes = (end + PAGE_SIZE - 1) >> PAGE_SHIFT;
-
+ tables = roundup(puds * sizeof(pud_t), PAGE_SIZE);
+ tables += roundup(pmds * sizeof(pmd_t), PAGE_SIZE);
tables += roundup(ptes * sizeof(pte_t), PAGE_SIZE);
#ifdef CONFIG_X86_32
@@ -86,7 +90,7 @@
pgt_buf_top = pgt_buf_start + (tables >> PAGE_SHIFT);
printk(KERN_DEBUG "kernel direct mapping tables up to %#lx @ [mem %#010lx-%#010lx]\n",
- end - 1, pgt_buf_start << PAGE_SHIFT,
+ mr[nr_range - 1].end - 1, pgt_buf_start << PAGE_SHIFT,
(pgt_buf_top << PAGE_SHIFT) - 1);
}
@@ -267,7 +271,7 @@
* nodes are discovered.
*/
if (!after_bootmem)
- find_early_table_space(&mr[0], end, use_pse, use_gbpages);
+ find_early_table_space(mr, nr_range);
for (i = 0; i < nr_range; i++)
ret = kernel_physical_mapping_init(mr[i].start, mr[i].end,
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index 2b6b4a3..3baff25 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -386,7 +386,8 @@
* these mappings are more intelligent.
*/
if (pte_val(*pte)) {
- pages++;
+ if (!after_bootmem)
+ pages++;
continue;
}
@@ -451,6 +452,8 @@
* attributes.
*/
if (page_size_mask & (1 << PG_LEVEL_2M)) {
+ if (!after_bootmem)
+ pages++;
last_map_addr = next;
continue;
}
@@ -526,6 +529,8 @@
* attributes.
*/
if (page_size_mask & (1 << PG_LEVEL_1G)) {
+ if (!after_bootmem)
+ pages++;
last_map_addr = next;
continue;
}
diff --git a/arch/x86/mm/tlb.c b/arch/x86/mm/tlb.c
index 0777f04..60f926c 100644
--- a/arch/x86/mm/tlb.c
+++ b/arch/x86/mm/tlb.c
@@ -197,7 +197,7 @@
}
if (end == TLB_FLUSH_ALL || tlb_flushall_shift == -1
- || vmflag == VM_HUGETLB) {
+ || vmflag & VM_HUGETLB) {
local_flush_tlb();
goto flush_all;
}
diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index 26b8a85..48768df 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -55,7 +55,7 @@
val |= counter_config->extra;
event &= model->event_mask ? model->event_mask : 0xFF;
val |= event & 0xFF;
- val |= (event & 0x0F00) << 24;
+ val |= (u64)(event & 0x0F00) << 24;
return val;
}
diff --git a/arch/x86/pci/ce4100.c b/arch/x86/pci/ce4100.c
index 41bd2a2..b914e20 100644
--- a/arch/x86/pci/ce4100.c
+++ b/arch/x86/pci/ce4100.c
@@ -115,6 +115,16 @@
reg_read(reg, value);
}
+static void reg_noirq_read(struct sim_dev_reg *reg, u32 *value)
+{
+ unsigned long flags;
+
+ raw_spin_lock_irqsave(&pci_config_lock, flags);
+ /* force interrupt pin value to 0 */
+ *value = reg->sim_reg.value & 0xfff00ff;
+ raw_spin_unlock_irqrestore(&pci_config_lock, flags);
+}
+
static struct sim_dev_reg bus1_fixups[] = {
DEFINE_REG(2, 0, 0x10, (16*MB), reg_init, reg_read, reg_write)
DEFINE_REG(2, 0, 0x14, (256), reg_init, reg_read, reg_write)
@@ -144,6 +154,7 @@
DEFINE_REG(11, 5, 0x10, (64*KB), reg_init, reg_read, reg_write)
DEFINE_REG(11, 6, 0x10, (256), reg_init, reg_read, reg_write)
DEFINE_REG(11, 7, 0x10, (64*KB), reg_init, reg_read, reg_write)
+ DEFINE_REG(11, 7, 0x3c, 256, reg_init, reg_noirq_read, reg_write)
DEFINE_REG(12, 0, 0x10, (128*KB), reg_init, reg_read, reg_write)
DEFINE_REG(12, 0, 0x14, (256), reg_init, reg_read, reg_write)
DEFINE_REG(12, 1, 0x10, (1024), reg_init, reg_read, reg_write)
@@ -161,8 +172,10 @@
DEFINE_REG(16, 0, 0x10, (64*KB), reg_init, reg_read, reg_write)
DEFINE_REG(16, 0, 0x14, (64*MB), reg_init, reg_read, reg_write)
DEFINE_REG(16, 0, 0x18, (64*MB), reg_init, reg_read, reg_write)
+ DEFINE_REG(16, 0, 0x3c, 256, reg_init, reg_noirq_read, reg_write)
DEFINE_REG(17, 0, 0x10, (128*KB), reg_init, reg_read, reg_write)
DEFINE_REG(18, 0, 0x10, (1*KB), reg_init, reg_read, reg_write)
+ DEFINE_REG(18, 0, 0x3c, 256, reg_init, reg_noirq_read, reg_write)
};
static void __init init_sim_regs(void)
diff --git a/arch/x86/platform/ce4100/ce4100.c b/arch/x86/platform/ce4100/ce4100.c
index 4c61b52..92525cb 100644
--- a/arch/x86/platform/ce4100/ce4100.c
+++ b/arch/x86/platform/ce4100/ce4100.c
@@ -21,12 +21,25 @@
#include <asm/i8259.h>
#include <asm/io.h>
#include <asm/io_apic.h>
+#include <asm/emergency-restart.h>
static int ce4100_i8042_detect(void)
{
return 0;
}
+/*
+ * The CE4100 platform has an internal 8051 Microcontroller which is
+ * responsible for signaling to the external Power Management Unit the
+ * intention to reset, reboot or power off the system. This 8051 device has
+ * its command register mapped at I/O port 0xcf9 and the value 0x4 is used
+ * to power off the system.
+ */
+static void ce4100_power_off(void)
+{
+ outb(0x4, 0xcf9);
+}
+
#ifdef CONFIG_SERIAL_8250
static unsigned int mem_serial_in(struct uart_port *p, int offset)
@@ -139,8 +152,19 @@
x86_init.mpparse.find_smp_config = x86_init_noop;
x86_init.pci.init = ce4100_pci_init;
+ /*
+ * By default, the reboot method is ACPI which is supported by the
+ * CE4100 bootloader CEFDK using FADT.ResetReg Address and ResetValue
+ * the bootloader will however issue a system power off instead of
+ * reboot. By using BOOT_KBD we ensure proper system reboot as
+ * expected.
+ */
+ reboot_type = BOOT_KBD;
+
#ifdef CONFIG_X86_IO_APIC
x86_init.pci.init_irq = sdv_pci_init;
x86_init.mpparse.setup_ioapic_ids = setup_ioapic_ids_from_mpc_nocheck;
#endif
+
+ pm_power_off = ce4100_power_off;
}
diff --git a/arch/x86/platform/efi/efi.c b/arch/x86/platform/efi/efi.c
index aded2a9..ad443914 100644
--- a/arch/x86/platform/efi/efi.c
+++ b/arch/x86/platform/efi/efi.c
@@ -70,11 +70,15 @@
struct efi_memory_map memmap;
bool efi_64bit;
-static bool efi_native;
static struct efi efi_phys __initdata;
static efi_system_table_t efi_systab __initdata;
+static inline bool efi_is_native(void)
+{
+ return IS_ENABLED(CONFIG_X86_64) == efi_64bit;
+}
+
static int __init setup_noefi(char *arg)
{
efi_enabled = 0;
@@ -420,7 +424,7 @@
}
}
-static void __init efi_unmap_memmap(void)
+void __init efi_unmap_memmap(void)
{
if (memmap.map) {
early_iounmap(memmap.map, memmap.nr_map * memmap.desc_size);
@@ -432,7 +436,7 @@
{
void *p;
- if (!efi_native)
+ if (!efi_is_native())
return;
for (p = memmap.map; p < memmap.map_end; p += memmap.desc_size) {
@@ -684,12 +688,10 @@
return;
}
efi_phys.systab = (efi_system_table_t *)boot_params.efi_info.efi_systab;
- efi_native = !efi_64bit;
#else
efi_phys.systab = (efi_system_table_t *)
(boot_params.efi_info.efi_systab |
((__u64)boot_params.efi_info.efi_systab_hi<<32));
- efi_native = efi_64bit;
#endif
if (efi_systab_init(efi_phys.systab)) {
@@ -723,7 +725,7 @@
* that doesn't match the kernel 32/64-bit mode.
*/
- if (!efi_native)
+ if (!efi_is_native())
pr_info("No EFI runtime due to 32/64-bit mismatch with kernel\n");
else if (efi_runtime_init()) {
efi_enabled = 0;
@@ -735,7 +737,7 @@
return;
}
#ifdef CONFIG_X86_32
- if (efi_native) {
+ if (efi_is_native()) {
x86_platform.get_wallclock = efi_get_time;
x86_platform.set_wallclock = efi_set_rtc_mmss;
}
@@ -810,6 +812,16 @@
return NULL;
}
+void efi_memory_uc(u64 addr, unsigned long size)
+{
+ unsigned long page_shift = 1UL << EFI_PAGE_SHIFT;
+ u64 npages;
+
+ npages = round_up(size, page_shift) / page_shift;
+ memrange_efi_to_native(&addr, &npages);
+ set_memory_uc(addr, npages);
+}
+
/*
* This function will switch the EFI runtime services to virtual mode.
* Essentially, look through the EFI memmap and map every region that
@@ -823,7 +835,7 @@
efi_memory_desc_t *md, *prev_md = NULL;
efi_status_t status;
unsigned long size;
- u64 end, systab, addr, npages, end_pfn;
+ u64 end, systab, end_pfn;
void *p, *va, *new_memmap = NULL;
int count = 0;
@@ -834,7 +846,7 @@
* non-native EFI
*/
- if (!efi_native) {
+ if (!efi_is_native()) {
efi_unmap_memmap();
return;
}
@@ -879,10 +891,14 @@
end_pfn = PFN_UP(end);
if (end_pfn <= max_low_pfn_mapped
|| (end_pfn > (1UL << (32 - PAGE_SHIFT))
- && end_pfn <= max_pfn_mapped))
+ && end_pfn <= max_pfn_mapped)) {
va = __va(md->phys_addr);
- else
- va = efi_ioremap(md->phys_addr, size, md->type);
+
+ if (!(md->attribute & EFI_MEMORY_WB))
+ efi_memory_uc((u64)(unsigned long)va, size);
+ } else
+ va = efi_ioremap(md->phys_addr, size,
+ md->type, md->attribute);
md->virt_addr = (u64) (unsigned long) va;
@@ -892,13 +908,6 @@
continue;
}
- if (!(md->attribute & EFI_MEMORY_WB)) {
- addr = md->virt_addr;
- npages = md->num_pages;
- memrange_efi_to_native(&addr, &npages);
- set_memory_uc(addr, npages);
- }
-
systab = (u64) (unsigned long) efi_phys.systab;
if (md->phys_addr <= systab && systab < end) {
systab += md->virt_addr - md->phys_addr;
diff --git a/arch/x86/platform/efi/efi_64.c b/arch/x86/platform/efi/efi_64.c
index ac3aa54..95fd505 100644
--- a/arch/x86/platform/efi/efi_64.c
+++ b/arch/x86/platform/efi/efi_64.c
@@ -82,7 +82,7 @@
}
void __iomem *__init efi_ioremap(unsigned long phys_addr, unsigned long size,
- u32 type)
+ u32 type, u64 attribute)
{
unsigned long last_map_pfn;
@@ -92,8 +92,11 @@
last_map_pfn = init_memory_mapping(phys_addr, phys_addr + size);
if ((last_map_pfn << PAGE_SHIFT) < phys_addr + size) {
unsigned long top = last_map_pfn << PAGE_SHIFT;
- efi_ioremap(top, size - (top - phys_addr), type);
+ efi_ioremap(top, size - (top - phys_addr), type, attribute);
}
+ if (!(attribute & EFI_MEMORY_WB))
+ efi_memory_uc((u64)(unsigned long)__va(phys_addr), size);
+
return (void __iomem *)__va(phys_addr);
}
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index e3497f2..586d838 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -81,8 +81,6 @@
#include "smp.h"
#include "multicalls.h"
-#include <xen/events.h>
-
EXPORT_SYMBOL_GPL(hypercall_page);
DEFINE_PER_CPU(struct vcpu_info *, xen_vcpu);
diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index 6226c99..dcf5f2d 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -1288,6 +1288,25 @@
return this_cpu_read(xen_vcpu_info.arch.cr2);
}
+void xen_flush_tlb_all(void)
+{
+ struct mmuext_op *op;
+ struct multicall_space mcs;
+
+ trace_xen_mmu_flush_tlb_all(0);
+
+ preempt_disable();
+
+ mcs = xen_mc_entry(sizeof(*op));
+
+ op = mcs.args;
+ op->cmd = MMUEXT_TLB_FLUSH_ALL;
+ MULTI_mmuext_op(mcs.mc, op, 1, NULL, DOMID_SELF);
+
+ xen_mc_issue(PARAVIRT_LAZY_MMU);
+
+ preempt_enable();
+}
static void xen_flush_tlb(void)
{
struct mmuext_op *op;
@@ -2518,7 +2537,7 @@
err = 0;
out:
- flush_tlb_all();
+ xen_flush_tlb_all();
return err;
}
diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
index cdcb48a..0d1f36a 100644
--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@@ -13,6 +13,8 @@
select GENERIC_CPU_DEVICES
select MODULES_USE_ELF_RELA
select GENERIC_PCI_IOMAP
+ select GENERIC_KERNEL_THREAD
+ select GENERIC_KERNEL_EXECVE
select ARCH_WANT_OPTIONAL_GPIOLIB
help
Xtensa processors are 32-bit RISC machines designed by Tensilica
diff --git a/arch/xtensa/include/asm/io.h b/arch/xtensa/include/asm/io.h
index e6be5b9..700c2e6 100644
--- a/arch/xtensa/include/asm/io.h
+++ b/arch/xtensa/include/asm/io.h
@@ -62,6 +62,10 @@
static inline void iounmap(volatile void __iomem *addr)
{
}
+
+#define virt_to_bus virt_to_phys
+#define bus_to_virt phys_to_virt
+
#endif /* CONFIG_MMU */
/*
diff --git a/arch/xtensa/include/asm/processor.h b/arch/xtensa/include/asm/processor.h
index 5c371d8..2d630e7 100644
--- a/arch/xtensa/include/asm/processor.h
+++ b/arch/xtensa/include/asm/processor.h
@@ -152,6 +152,7 @@
/* Clearing a0 terminates the backtrace. */
#define start_thread(regs, new_pc, new_sp) \
+ memset(regs, 0, sizeof(*regs)); \
regs->pc = new_pc; \
regs->ps = USER_PS_VALUE; \
regs->areg[1] = new_sp; \
@@ -168,9 +169,6 @@
/* Free all resources held by a thread. */
#define release_thread(thread) do { } while(0)
-/* Create a kernel thread without removing it from tasklists */
-extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
-
/* Copy and release all segment info associated with a VM */
#define copy_segments(p, mm) do { } while(0)
#define release_segments(mm) do { } while(0)
diff --git a/arch/xtensa/include/asm/syscall.h b/arch/xtensa/include/asm/syscall.h
index c1dacca..124aeee 100644
--- a/arch/xtensa/include/asm/syscall.h
+++ b/arch/xtensa/include/asm/syscall.h
@@ -10,7 +10,7 @@
struct pt_regs;
struct sigaction;
-asmlinkage long xtensa_execve(char*, char**, char**, struct pt_regs*);
+asmlinkage long sys_execve(char*, char**, char**, struct pt_regs*);
asmlinkage long xtensa_clone(unsigned long, unsigned long, struct pt_regs*);
asmlinkage long xtensa_ptrace(long, long, long, long);
asmlinkage long xtensa_sigreturn(struct pt_regs*);
diff --git a/arch/xtensa/include/asm/unistd.h b/arch/xtensa/include/asm/unistd.h
index 9ef1c31..f4e6eaa 100644
--- a/arch/xtensa/include/asm/unistd.h
+++ b/arch/xtensa/include/asm/unistd.h
@@ -1,16 +1,9 @@
-/*
- * include/asm-xtensa/unistd.h
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2001 - 2005 Tensilica Inc.
- */
+#ifndef _XTENSA_UNISTD_H
+#define _XTENSA_UNISTD_H
+#define __ARCH_WANT_SYS_EXECVE
#include <uapi/asm/unistd.h>
-
/*
* "Conditional" syscalls
*
@@ -37,3 +30,5 @@
#define __IGNORE_mmap /* use mmap2 */
#define __IGNORE_vfork /* use clone */
#define __IGNORE_fadvise64 /* use fadvise64_64 */
+
+#endif /* _XTENSA_UNISTD_H */
diff --git a/arch/xtensa/include/uapi/asm/unistd.h b/arch/xtensa/include/uapi/asm/unistd.h
index 479abae..9f36d0e 100644
--- a/arch/xtensa/include/uapi/asm/unistd.h
+++ b/arch/xtensa/include/uapi/asm/unistd.h
@@ -1,14 +1,4 @@
-/*
- * include/asm-xtensa/unistd.h
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2001 - 2012 Tensilica Inc.
- */
-
-#ifndef _UAPI_XTENSA_UNISTD_H
+#if !defined(_UAPI_XTENSA_UNISTD_H) || defined(__SYSCALL)
#define _UAPI_XTENSA_UNISTD_H
#ifndef __SYSCALL
@@ -272,7 +262,7 @@
#define __NR_clone 116
__SYSCALL(116, xtensa_clone, 5)
#define __NR_execve 117
-__SYSCALL(117, xtensa_execve, 3)
+__SYSCALL(117, sys_execve, 3)
#define __NR_exit 118
__SYSCALL(118, sys_exit, 1)
#define __NR_exit_group 119
@@ -759,4 +749,6 @@
#define SYS_XTENSA_COUNT 5 /* count */
+#undef __SYSCALL
+
#endif /* _UAPI_XTENSA_UNISTD_H */
diff --git a/arch/xtensa/kernel/entry.S b/arch/xtensa/kernel/entry.S
index 18453067..90bfc1d 100644
--- a/arch/xtensa/kernel/entry.S
+++ b/arch/xtensa/kernel/entry.S
@@ -1833,50 +1833,6 @@
/*
- * Create a kernel thread
- *
- * int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags)
- * a2 a2 a3 a4
- */
-
-ENTRY(kernel_thread)
- entry a1, 16
-
- mov a5, a2 # preserve fn over syscall
- mov a7, a3 # preserve args over syscall
-
- movi a3, _CLONE_VM | _CLONE_UNTRACED
- movi a2, __NR_clone
- or a6, a4, a3 # arg0: flags
- mov a3, a1 # arg1: sp
- syscall
-
- beq a3, a1, 1f # branch if parent
- mov a6, a7 # args
- callx4 a5 # fn(args)
-
- movi a2, __NR_exit
- syscall # return value of fn(args) still in a6
-
-1: retw
-
-/*
- * Do a system call from kernel instead of calling sys_execve, so we end up
- * with proper pt_regs.
- *
- * int kernel_execve(const char *fname, char *const argv[], charg *const envp[])
- * a2 a2 a3 a4
- */
-
-ENTRY(kernel_execve)
- entry a1, 16
- mov a6, a2 # arg0 is in a6
- movi a2, __NR_execve
- syscall
-
- retw
-
-/*
* Task switch.
*
* struct task* _switch_to (struct task* prev, struct task* next)
@@ -1958,3 +1914,16 @@
j common_exception_return
+/*
+ * Kernel thread creation helper
+ * On entry, set up by copy_thread: a2 = thread_fn, a3 = thread_fn arg
+ * left from _switch_to: a6 = prev
+ */
+ENTRY(ret_from_kernel_thread)
+
+ call4 schedule_tail
+ mov a6, a3
+ callx4 a2
+ j common_exception_return
+
+ENDPROC(ret_from_kernel_thread)
diff --git a/arch/xtensa/kernel/process.c b/arch/xtensa/kernel/process.c
index 1908f66..09ae7bf 100644
--- a/arch/xtensa/kernel/process.c
+++ b/arch/xtensa/kernel/process.c
@@ -45,6 +45,7 @@
#include <asm/regs.h>
extern void ret_from_fork(void);
+extern void ret_from_kernel_thread(void);
struct task_struct *current_set[NR_CPUS] = {&init_task, };
@@ -158,18 +159,30 @@
/*
* Copy thread.
*
+ * There are two modes in which this function is called:
+ * 1) Userspace thread creation,
+ * regs != NULL, usp_thread_fn is userspace stack pointer.
+ * It is expected to copy parent regs (in case CLONE_VM is not set
+ * in the clone_flags) and set up passed usp in the childregs.
+ * 2) Kernel thread creation,
+ * regs == NULL, usp_thread_fn is the function to run in the new thread
+ * and thread_fn_arg is its parameter.
+ * childregs are not used for the kernel threads.
+ *
* The stack layout for the new thread looks like this:
*
- * +------------------------+ <- sp in childregs (= tos)
+ * +------------------------+
* | childregs |
* +------------------------+ <- thread.sp = sp in dummy-frame
* | dummy-frame | (saved in dummy-frame spill-area)
* +------------------------+
*
- * We create a dummy frame to return to ret_from_fork:
- * a0 points to ret_from_fork (simulating a call4)
+ * We create a dummy frame to return to either ret_from_fork or
+ * ret_from_kernel_thread:
+ * a0 points to ret_from_fork/ret_from_kernel_thread (simulating a call4)
* sp points to itself (thread.sp)
- * a2, a3 are unused.
+ * a2, a3 are unused for userspace threads,
+ * a2 points to thread_fn, a3 holds thread_fn arg for kernel threads.
*
* Note: This is a pristine frame, so we don't need any spill region on top of
* childregs.
@@ -185,43 +198,63 @@
* involved. Much simpler to just not copy those live frames across.
*/
-int copy_thread(unsigned long clone_flags, unsigned long usp,
- unsigned long unused,
- struct task_struct * p, struct pt_regs * regs)
+int copy_thread(unsigned long clone_flags, unsigned long usp_thread_fn,
+ unsigned long thread_fn_arg,
+ struct task_struct *p, struct pt_regs *unused)
{
- struct pt_regs *childregs;
- unsigned long tos;
- int user_mode = user_mode(regs);
+ struct pt_regs *childregs = task_pt_regs(p);
#if (XTENSA_HAVE_COPROCESSORS || XTENSA_HAVE_IO_PORTS)
struct thread_info *ti;
#endif
- /* Set up new TSS. */
- tos = (unsigned long)task_stack_page(p) + THREAD_SIZE;
- if (user_mode)
- childregs = (struct pt_regs*)(tos - PT_USER_SIZE);
- else
- childregs = (struct pt_regs*)tos - 1;
-
- /* This does not copy all the regs. In a bout of brilliance or madness,
- ARs beyond a0-a15 exist past the end of the struct. */
- *childregs = *regs;
-
/* Create a call4 dummy-frame: a0 = 0, a1 = childregs. */
*((int*)childregs - 3) = (unsigned long)childregs;
*((int*)childregs - 4) = 0;
- childregs->areg[2] = 0;
- p->set_child_tid = p->clear_child_tid = NULL;
- p->thread.ra = MAKE_RA_FOR_CALL((unsigned long)ret_from_fork, 0x1);
p->thread.sp = (unsigned long)childregs;
- if (user_mode(regs)) {
+ if (!(p->flags & PF_KTHREAD)) {
+ struct pt_regs *regs = current_pt_regs();
+ unsigned long usp = usp_thread_fn ?
+ usp_thread_fn : regs->areg[1];
+ p->thread.ra = MAKE_RA_FOR_CALL(
+ (unsigned long)ret_from_fork, 0x1);
+
+ /* This does not copy all the regs.
+ * In a bout of brilliance or madness,
+ * ARs beyond a0-a15 exist past the end of the struct.
+ */
+ *childregs = *regs;
childregs->areg[1] = usp;
+ childregs->areg[2] = 0;
+
+ /* When sharing memory with the parent thread, the child
+ usually starts on a pristine stack, so we have to reset
+ windowbase, windowstart and wmask.
+ (Note that such a new thread is required to always create
+ an initial call4 frame)
+ The exception is vfork, where the new thread continues to
+ run on the parent's stack until it calls execve. This could
+ be a call8 or call12, which requires a legal stack frame
+ of the previous caller for the overflow handlers to work.
+ (Note that it's always legal to overflow live registers).
+ In this case, ensure to spill at least the stack pointer
+ of that frame. */
+
if (clone_flags & CLONE_VM) {
- childregs->wmask = 1; /* can't share live windows */
+ /* check that caller window is live and same stack */
+ int len = childregs->wmask & ~0xf;
+ if (regs->areg[1] == usp && len != 0) {
+ int callinc = (regs->areg[0] >> 30) & 3;
+ int caller_ars = XCHAL_NUM_AREGS - callinc * 4;
+ put_user(regs->areg[caller_ars+1],
+ (unsigned __user*)(usp - 12));
+ }
+ childregs->wmask = 1;
+ childregs->windowstart = 1;
+ childregs->windowbase = 0;
} else {
int len = childregs->wmask & ~0xf;
memcpy(&childregs->areg[XCHAL_NUM_AREGS - len/4],
@@ -230,11 +263,19 @@
// FIXME: we need to set THREADPTR in thread_info...
if (clone_flags & CLONE_SETTLS)
childregs->areg[2] = childregs->areg[6];
-
} else {
- /* In kernel space, we start a new thread with a new stack. */
- childregs->wmask = 1;
- childregs->areg[1] = tos;
+ p->thread.ra = MAKE_RA_FOR_CALL(
+ (unsigned long)ret_from_kernel_thread, 1);
+
+ /* pass parameters to ret_from_kernel_thread:
+ * a2 = thread_fn, a3 = thread_fn arg
+ */
+ *((int *)childregs - 1) = thread_fn_arg;
+ *((int *)childregs - 2) = usp_thread_fn;
+
+ /* Childregs are only used when we're going to userspace
+ * in which case start_thread will set them up.
+ */
}
#if (XTENSA_HAVE_COPROCESSORS || XTENSA_HAVE_IO_PORTS)
@@ -330,32 +371,5 @@
void __user *child_tid, long a5,
struct pt_regs *regs)
{
- if (!newsp)
- newsp = regs->areg[1];
return do_fork(clone_flags, newsp, regs, 0, parent_tid, child_tid);
}
-
-/*
- * xtensa_execve() executes a new program.
- */
-
-asmlinkage
-long xtensa_execve(const char __user *name,
- const char __user *const __user *argv,
- const char __user *const __user *envp,
- long a3, long a4, long a5,
- struct pt_regs *regs)
-{
- long error;
- struct filename *filename;
-
- filename = getname(name);
- error = PTR_ERR(filename);
- if (IS_ERR(filename))
- goto out;
- error = do_execve(filename->name, argv, envp, regs);
- putname(filename);
-out:
- return error;
-}
-
diff --git a/arch/xtensa/kernel/syscall.c b/arch/xtensa/kernel/syscall.c
index a5c01e7..5702065f 100644
--- a/arch/xtensa/kernel/syscall.c
+++ b/arch/xtensa/kernel/syscall.c
@@ -32,10 +32,8 @@
syscall_t sys_call_table[__NR_syscall_count] /* FIXME __cacheline_aligned */= {
[0 ... __NR_syscall_count - 1] = (syscall_t)&sys_ni_syscall,
-#undef __SYSCALL
#define __SYSCALL(nr,symbol,nargs) [ nr ] = (syscall_t)symbol,
-#undef __KERNEL_SYSCALLS__
-#include <asm/unistd.h>
+#include <uapi/asm/unistd.h>
};
asmlinkage long xtensa_shmat(int shmid, char __user *shmaddr, int shmflg)
@@ -49,7 +47,8 @@
return (long)ret;
}
-asmlinkage long xtensa_fadvise64_64(int fd, int advice, unsigned long long offset, unsigned long long len)
+asmlinkage long xtensa_fadvise64_64(int fd, int advice,
+ unsigned long long offset, unsigned long long len)
{
return sys_fadvise64_64(fd, offset, len, advice);
}
diff --git a/arch/xtensa/kernel/xtensa_ksyms.c b/arch/xtensa/kernel/xtensa_ksyms.c
index a8b9f1f..afe058b 100644
--- a/arch/xtensa/kernel/xtensa_ksyms.c
+++ b/arch/xtensa/kernel/xtensa_ksyms.c
@@ -43,7 +43,6 @@
EXPORT_SYMBOL(clear_page);
EXPORT_SYMBOL(copy_page);
-EXPORT_SYMBOL(kernel_thread);
EXPORT_SYMBOL(empty_zero_page);
/*
diff --git a/block/Kconfig b/block/Kconfig
index 09acf1b..a7e40a7 100644
--- a/block/Kconfig
+++ b/block/Kconfig
@@ -89,7 +89,7 @@
config BLK_DEV_THROTTLING
bool "Block layer bio throttling support"
- depends on BLK_CGROUP=y && EXPERIMENTAL
+ depends on BLK_CGROUP=y
default n
---help---
Block layer bio throttling support. It can be used to limit
diff --git a/block/blk-cgroup.c b/block/blk-cgroup.c
index cafcd74..d0b7703 100644
--- a/block/blk-cgroup.c
+++ b/block/blk-cgroup.c
@@ -285,6 +285,13 @@
blkg_destroy(blkg);
spin_unlock(&blkcg->lock);
}
+
+ /*
+ * root blkg is destroyed. Just clear the pointer since
+ * root_rl does not take reference on root blkg.
+ */
+ q->root_blkg = NULL;
+ q->root_rl.blkg = NULL;
}
static void blkg_rcu_free(struct rcu_head *rcu_head)
@@ -326,6 +333,9 @@
*/
if (rl == &q->root_rl) {
ent = &q->blkg_list;
+ /* There are no more block groups, hence no request lists */
+ if (list_empty(ent))
+ return NULL;
} else {
blkg = container_of(rl, struct blkcg_gq, rl);
ent = &blkg->q_node;
diff --git a/block/blk-core.c b/block/blk-core.c
index a33870b..3c95c4d 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -2868,7 +2868,8 @@
struct request *rqa = container_of(a, struct request, queuelist);
struct request *rqb = container_of(b, struct request, queuelist);
- return !(rqa->q <= rqb->q);
+ return !(rqa->q < rqb->q ||
+ (rqa->q == rqb->q && blk_rq_pos(rqa) < blk_rq_pos(rqb)));
}
/*
diff --git a/block/blk-exec.c b/block/blk-exec.c
index 8b6dc5b..f71eac3 100644
--- a/block/blk-exec.c
+++ b/block/blk-exec.c
@@ -52,11 +52,17 @@
rq_end_io_fn *done)
{
int where = at_head ? ELEVATOR_INSERT_FRONT : ELEVATOR_INSERT_BACK;
+ bool is_pm_resume;
WARN_ON(irqs_disabled());
rq->rq_disk = bd_disk;
rq->end_io = done;
+ /*
+ * need to check this before __blk_run_queue(), because rq can
+ * be freed before that returns.
+ */
+ is_pm_resume = rq->cmd_type == REQ_TYPE_PM_RESUME;
spin_lock_irq(q->queue_lock);
@@ -71,7 +77,7 @@
__elv_add_request(q, rq, where);
__blk_run_queue(q);
/* the queue is stopped so it won't be run */
- if (rq->cmd_type == REQ_TYPE_PM_RESUME)
+ if (is_pm_resume)
q->request_fn(q);
spin_unlock_irq(q->queue_lock);
}
diff --git a/crypto/cryptd.c b/crypto/cryptd.c
index 671d4d6..7bdd61b 100644
--- a/crypto/cryptd.c
+++ b/crypto/cryptd.c
@@ -137,13 +137,18 @@
struct crypto_async_request *req, *backlog;
cpu_queue = container_of(work, struct cryptd_cpu_queue, work);
- /* Only handle one request at a time to avoid hogging crypto
- * workqueue. preempt_disable/enable is used to prevent
- * being preempted by cryptd_enqueue_request() */
+ /*
+ * Only handle one request at a time to avoid hogging crypto workqueue.
+ * preempt_disable/enable is used to prevent being preempted by
+ * cryptd_enqueue_request(). local_bh_disable/enable is used to prevent
+ * cryptd_enqueue_request() being accessed from software interrupts.
+ */
+ local_bh_disable();
preempt_disable();
backlog = crypto_get_backlog(&cpu_queue->queue);
req = crypto_dequeue_request(&cpu_queue->queue);
preempt_enable();
+ local_bh_enable();
if (!req)
return;
diff --git a/drivers/acpi/glue.c b/drivers/acpi/glue.c
index d1a2d74..0837308 100644
--- a/drivers/acpi/glue.c
+++ b/drivers/acpi/glue.c
@@ -159,6 +159,7 @@
if (physical_node->node_id >= ACPI_MAX_PHYSICAL_NODE) {
retval = -ENOSPC;
mutex_unlock(&acpi_dev->physical_node_lock);
+ kfree(physical_node);
goto err;
}
diff --git a/drivers/acpi/processor_driver.c b/drivers/acpi/processor_driver.c
index e78c2a5..bd4e5dc 100644
--- a/drivers/acpi/processor_driver.c
+++ b/drivers/acpi/processor_driver.c
@@ -409,6 +409,7 @@
acpi_bus_generate_proc_event(device, event, 0);
acpi_bus_generate_netlink_event(device->pnp.device_class,
dev_name(&device->dev), event, 0);
+ break;
default:
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Unsupported event [0x%x]\n", event));
diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index f94d4c8..0230cb6 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -1345,12 +1345,15 @@
acpi_video_bus_get_devices(struct acpi_video_bus *video,
struct acpi_device *device)
{
- int status;
+ int status = 0;
struct acpi_device *dev;
- status = acpi_video_device_enumerate(video);
- if (status)
- return status;
+ /*
+ * There are systems where video module known to work fine regardless
+ * of broken _DOD and ignoring returned value here doesn't cause
+ * any issues later.
+ */
+ acpi_video_device_enumerate(video);
list_for_each_entry(dev, &device->children, node) {
diff --git a/drivers/amba/tegra-ahb.c b/drivers/amba/tegra-ahb.c
index 0b6f0b2..bd5de08 100644
--- a/drivers/amba/tegra-ahb.c
+++ b/drivers/amba/tegra-ahb.c
@@ -24,6 +24,7 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/tegra-ahb.h>
#define DRV_NAME "tegra-ahb"
diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
index b1ae480..b7078af 100644
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
@@ -238,7 +238,7 @@
return 0;
}
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
static int ahci_suspend(struct device *dev)
{
struct ahci_platform_data *pdata = dev_get_platdata(dev);
diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c
index fd9ecf7..5b0ba3f 100644
--- a/drivers/ata/libata-acpi.c
+++ b/drivers/ata/libata-acpi.c
@@ -1105,10 +1105,15 @@
struct acpi_device *acpi_dev;
struct acpi_device_power_state *states;
- if (ap->flags & ATA_FLAG_ACPI_SATA)
- ata_dev = &ap->link.device[sdev->channel];
- else
+ if (ap->flags & ATA_FLAG_ACPI_SATA) {
+ if (!sata_pmp_attached(ap))
+ ata_dev = &ap->link.device[sdev->id];
+ else
+ ata_dev = &ap->pmp_link[sdev->channel].device[sdev->id];
+ }
+ else {
ata_dev = &ap->link.device[sdev->id];
+ }
*handle = ata_dev_acpi_handle(ata_dev);
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 3cc7096..f46fbd3 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -2942,6 +2942,10 @@
if (xfer_mode == t->mode)
return t;
+
+ WARN_ONCE(true, "%s: unable to find timing for xfer_mode 0x%x\n",
+ __func__, xfer_mode);
+
return NULL;
}
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index e3bda074..a6df6a3 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -1052,6 +1052,8 @@
{
sdev->use_10_for_rw = 1;
sdev->use_10_for_ms = 1;
+ sdev->no_report_opcodes = 1;
+ sdev->no_write_same = 1;
/* Schedule policy is determined by ->qc_defer() callback and
* it needs to see every deferred qc. Set dev_blocked to 1 to
diff --git a/drivers/ata/pata_arasan_cf.c b/drivers/ata/pata_arasan_cf.c
index 26201eb..371fd2c 100644
--- a/drivers/ata/pata_arasan_cf.c
+++ b/drivers/ata/pata_arasan_cf.c
@@ -317,6 +317,12 @@
return ret;
}
+ ret = clk_set_rate(acdev->clk, 166000000);
+ if (ret) {
+ dev_warn(acdev->host->dev, "clock set rate failed");
+ return ret;
+ }
+
spin_lock_irqsave(&acdev->host->lock, flags);
/* configure CF interface clock */
writel((pdata->cf_if_clk <= CF_IF_CLK_200M) ? pdata->cf_if_clk :
@@ -908,7 +914,7 @@
return 0;
}
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
static int arasan_cf_suspend(struct device *dev)
{
struct ata_host *host = dev_get_drvdata(dev);
diff --git a/drivers/ata/sata_highbank.c b/drivers/ata/sata_highbank.c
index 0d7c4c2..400bf1c 100644
--- a/drivers/ata/sata_highbank.c
+++ b/drivers/ata/sata_highbank.c
@@ -260,7 +260,7 @@
};
MODULE_DEVICE_TABLE(of, ahci_of_match);
-static int __init ahci_highbank_probe(struct platform_device *pdev)
+static int __devinit ahci_highbank_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct ahci_host_priv *hpriv;
@@ -378,7 +378,7 @@
return 0;
}
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
static int ahci_highbank_suspend(struct device *dev)
{
struct ata_host *host = dev_get_drvdata(dev);
diff --git a/drivers/ata/sata_svw.c b/drivers/ata/sata_svw.c
index 44a42565..08608de 100644
--- a/drivers/ata/sata_svw.c
+++ b/drivers/ata/sata_svw.c
@@ -142,6 +142,39 @@
return 0;
}
+static int k2_sata_softreset(struct ata_link *link,
+ unsigned int *class, unsigned long deadline)
+{
+ u8 dmactl;
+ void __iomem *mmio = link->ap->ioaddr.bmdma_addr;
+
+ dmactl = readb(mmio + ATA_DMA_CMD);
+
+ /* Clear the start bit */
+ if (dmactl & ATA_DMA_START) {
+ dmactl &= ~ATA_DMA_START;
+ writeb(dmactl, mmio + ATA_DMA_CMD);
+ }
+
+ return ata_sff_softreset(link, class, deadline);
+}
+
+static int k2_sata_hardreset(struct ata_link *link,
+ unsigned int *class, unsigned long deadline)
+{
+ u8 dmactl;
+ void __iomem *mmio = link->ap->ioaddr.bmdma_addr;
+
+ dmactl = readb(mmio + ATA_DMA_CMD);
+
+ /* Clear the start bit */
+ if (dmactl & ATA_DMA_START) {
+ dmactl &= ~ATA_DMA_START;
+ writeb(dmactl, mmio + ATA_DMA_CMD);
+ }
+
+ return sata_sff_hardreset(link, class, deadline);
+}
static void k2_sata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
{
@@ -346,6 +379,8 @@
static struct ata_port_operations k2_sata_ops = {
.inherits = &ata_bmdma_port_ops,
+ .softreset = k2_sata_softreset,
+ .hardreset = k2_sata_hardreset,
.sff_tf_load = k2_sata_tf_load,
.sff_tf_read = k2_sata_tf_read,
.sff_check_status = k2_stat_check_status,
diff --git a/drivers/base/Kconfig b/drivers/base/Kconfig
index 08b4c52..b34b5cd 100644
--- a/drivers/base/Kconfig
+++ b/drivers/base/Kconfig
@@ -236,7 +236,7 @@
choice
prompt "Selected region size"
- default CMA_SIZE_SEL_ABSOLUTE
+ default CMA_SIZE_SEL_MBYTES
config CMA_SIZE_SEL_MBYTES
bool "Use mega bytes value only"
diff --git a/drivers/base/dma-coherent.c b/drivers/base/dma-coherent.c
index 560a7173..bc256b6 100644
--- a/drivers/base/dma-coherent.c
+++ b/drivers/base/dma-coherent.c
@@ -191,9 +191,8 @@
* This checks whether the memory was allocated from the per-device
* coherent memory pool and if so, maps that memory to the provided vma.
*
- * Returns 1 if we correctly mapped the memory, or 0 if
- * dma_release_coherent() should proceed with mapping memory from
- * generic pools.
+ * Returns 1 if we correctly mapped the memory, or 0 if the caller should
+ * proceed with mapping memory from generic pools.
*/
int dma_mmap_from_coherent(struct device *dev, struct vm_area_struct *vma,
void *vaddr, size_t size, int *ret)
diff --git a/drivers/base/dma-contiguous.c b/drivers/base/dma-contiguous.c
index 9a146947..612afcc 100644
--- a/drivers/base/dma-contiguous.c
+++ b/drivers/base/dma-contiguous.c
@@ -27,15 +27,12 @@
#include <linux/mm.h>
#include <linux/mutex.h>
#include <linux/page-isolation.h>
+#include <linux/sizes.h>
#include <linux/slab.h>
#include <linux/swap.h>
#include <linux/mm_types.h>
#include <linux/dma-contiguous.h>
-#ifndef SZ_1M
-#define SZ_1M (1 << 20)
-#endif
-
struct cma {
unsigned long base_pfn;
unsigned long count;
diff --git a/drivers/base/firmware_class.c b/drivers/base/firmware_class.c
index 8154145..8945f4e 100644
--- a/drivers/base/firmware_class.c
+++ b/drivers/base/firmware_class.c
@@ -36,68 +36,6 @@
MODULE_DESCRIPTION("Multi purpose firmware loading support");
MODULE_LICENSE("GPL");
-static const char *fw_path[] = {
- "/lib/firmware/updates/" UTS_RELEASE,
- "/lib/firmware/updates",
- "/lib/firmware/" UTS_RELEASE,
- "/lib/firmware"
-};
-
-/* Don't inline this: 'struct kstat' is biggish */
-static noinline long fw_file_size(struct file *file)
-{
- struct kstat st;
- if (vfs_getattr(file->f_path.mnt, file->f_path.dentry, &st))
- return -1;
- if (!S_ISREG(st.mode))
- return -1;
- if (st.size != (long)st.size)
- return -1;
- return st.size;
-}
-
-static bool fw_read_file_contents(struct file *file, struct firmware *fw)
-{
- long size;
- char *buf;
-
- size = fw_file_size(file);
- if (size < 0)
- return false;
- buf = vmalloc(size);
- if (!buf)
- return false;
- if (kernel_read(file, 0, buf, size) != size) {
- vfree(buf);
- return false;
- }
- fw->data = buf;
- fw->size = size;
- return true;
-}
-
-static bool fw_get_filesystem_firmware(struct firmware *fw, const char *name)
-{
- int i;
- bool success = false;
- char *path = __getname();
-
- for (i = 0; i < ARRAY_SIZE(fw_path); i++) {
- struct file *file;
- snprintf(path, PATH_MAX, "%s/%s", fw_path[i], name);
-
- file = filp_open(path, O_RDONLY, 0);
- if (IS_ERR(file))
- continue;
- success = fw_read_file_contents(file, fw);
- fput(file);
- if (success)
- break;
- }
- __putname(path);
- return success;
-}
-
/* Builtin firmware support */
#ifdef CONFIG_FW_LOADER
@@ -150,6 +88,11 @@
FW_STATUS_ABORT,
};
+enum fw_buf_fmt {
+ VMALLOC_BUF, /* used in direct loading */
+ PAGE_BUF, /* used in loading via userspace */
+};
+
static int loading_timeout = 60; /* In seconds */
static inline long firmware_loading_timeout(void)
@@ -173,8 +116,6 @@
spinlock_t name_lock;
struct list_head fw_names;
- wait_queue_head_t wait_queue;
- int cnt;
struct delayed_work work;
struct notifier_block pm_notify;
@@ -187,6 +128,7 @@
struct completion completion;
struct firmware_cache *fwc;
unsigned long status;
+ enum fw_buf_fmt fmt;
void *data;
size_t size;
struct page **pages;
@@ -240,6 +182,7 @@
strcpy(buf->fw_id, fw_name);
buf->fwc = fwc;
init_completion(&buf->completion);
+ buf->fmt = VMALLOC_BUF;
pr_debug("%s: fw-%s buf=%p\n", __func__, fw_name, buf);
@@ -307,10 +250,14 @@
list_del(&buf->list);
spin_unlock(&fwc->lock);
- vunmap(buf->data);
- for (i = 0; i < buf->nr_pages; i++)
- __free_page(buf->pages[i]);
- kfree(buf->pages);
+
+ if (buf->fmt == PAGE_BUF) {
+ vunmap(buf->data);
+ for (i = 0; i < buf->nr_pages; i++)
+ __free_page(buf->pages[i]);
+ kfree(buf->pages);
+ } else
+ vfree(buf->data);
kfree(buf);
}
@@ -319,6 +266,69 @@
kref_put(&buf->ref, __fw_free_buf);
}
+/* direct firmware loading support */
+static const char *fw_path[] = {
+ "/lib/firmware/updates/" UTS_RELEASE,
+ "/lib/firmware/updates",
+ "/lib/firmware/" UTS_RELEASE,
+ "/lib/firmware"
+};
+
+/* Don't inline this: 'struct kstat' is biggish */
+static noinline long fw_file_size(struct file *file)
+{
+ struct kstat st;
+ if (vfs_getattr(file->f_path.mnt, file->f_path.dentry, &st))
+ return -1;
+ if (!S_ISREG(st.mode))
+ return -1;
+ if (st.size != (long)st.size)
+ return -1;
+ return st.size;
+}
+
+static bool fw_read_file_contents(struct file *file, struct firmware_buf *fw_buf)
+{
+ long size;
+ char *buf;
+
+ size = fw_file_size(file);
+ if (size < 0)
+ return false;
+ buf = vmalloc(size);
+ if (!buf)
+ return false;
+ if (kernel_read(file, 0, buf, size) != size) {
+ vfree(buf);
+ return false;
+ }
+ fw_buf->data = buf;
+ fw_buf->size = size;
+ return true;
+}
+
+static bool fw_get_filesystem_firmware(struct firmware_buf *buf)
+{
+ int i;
+ bool success = false;
+ char *path = __getname();
+
+ for (i = 0; i < ARRAY_SIZE(fw_path); i++) {
+ struct file *file;
+ snprintf(path, PATH_MAX, "%s/%s", fw_path[i], buf->fw_id);
+
+ file = filp_open(path, O_RDONLY, 0);
+ if (IS_ERR(file))
+ continue;
+ success = fw_read_file_contents(file, buf);
+ fput(file);
+ if (success)
+ break;
+ }
+ __putname(path);
+ return success;
+}
+
static struct firmware_priv *to_firmware_priv(struct device *dev)
{
return container_of(dev, struct firmware_priv, dev);
@@ -423,6 +433,21 @@
#ifndef PAGE_KERNEL_RO
#define PAGE_KERNEL_RO PAGE_KERNEL
#endif
+
+/* one pages buffer should be mapped/unmapped only once */
+static int fw_map_pages_buf(struct firmware_buf *buf)
+{
+ if (buf->fmt != PAGE_BUF)
+ return 0;
+
+ if (buf->data)
+ vunmap(buf->data);
+ buf->data = vmap(buf->pages, buf->nr_pages, 0, PAGE_KERNEL_RO);
+ if (!buf->data)
+ return -ENOMEM;
+ return 0;
+}
+
/**
* firmware_loading_store - set value in the 'loading' control file
* @dev: device pointer
@@ -467,6 +492,14 @@
if (test_bit(FW_STATUS_LOADING, &fw_buf->status)) {
set_bit(FW_STATUS_DONE, &fw_buf->status);
clear_bit(FW_STATUS_LOADING, &fw_buf->status);
+
+ /*
+ * Several loading requests may be pending on
+ * one same firmware buf, so let all requests
+ * see the mapped 'buf->data' once the loading
+ * is completed.
+ * */
+ fw_map_pages_buf(fw_buf);
complete_all(&fw_buf->completion);
break;
}
@@ -670,15 +703,6 @@
return fw_priv;
}
-/* one pages buffer is mapped/unmapped only once */
-static int fw_map_pages_buf(struct firmware_buf *buf)
-{
- buf->data = vmap(buf->pages, buf->nr_pages, 0, PAGE_KERNEL_RO);
- if (!buf->data)
- return -ENOMEM;
- return 0;
-}
-
/* store the pages buffer info firmware from buf */
static void fw_set_page_data(struct firmware_buf *buf, struct firmware *fw)
{
@@ -778,11 +802,6 @@
return NULL;
}
- if (fw_get_filesystem_firmware(firmware, name)) {
- dev_dbg(device, "firmware: direct-loading firmware %s\n", name);
- return NULL;
- }
-
ret = fw_lookup_and_allocate_buf(name, &fw_cache, &buf);
if (!ret)
fw_priv = fw_create_instance(firmware, name, device,
@@ -832,6 +851,21 @@
struct device *f_dev = &fw_priv->dev;
struct firmware_buf *buf = fw_priv->buf;
struct firmware_cache *fwc = &fw_cache;
+ int direct_load = 0;
+
+ /* try direct loading from fs first */
+ if (fw_get_filesystem_firmware(buf)) {
+ dev_dbg(f_dev->parent, "firmware: direct-loading"
+ " firmware %s\n", buf->fw_id);
+
+ set_bit(FW_STATUS_DONE, &buf->status);
+ complete_all(&buf->completion);
+ direct_load = 1;
+ goto handle_fw;
+ }
+
+ /* fall back on userspace loading */
+ buf->fmt = PAGE_BUF;
dev_set_uevent_suppress(f_dev, true);
@@ -870,6 +904,7 @@
del_timer_sync(&fw_priv->timeout);
+handle_fw:
mutex_lock(&fw_lock);
if (!buf->size || test_bit(FW_STATUS_ABORT, &buf->status))
retval = -ENOENT;
@@ -884,9 +919,6 @@
if (!retval && f_dev->parent)
fw_add_devm_name(f_dev->parent, buf->fw_id);
- if (!retval)
- retval = fw_map_pages_buf(buf);
-
/*
* After caching firmware image is started, let it piggyback
* on request firmware.
@@ -902,6 +934,9 @@
fw_priv->buf = NULL;
mutex_unlock(&fw_lock);
+ if (direct_load)
+ goto err_put_dev;
+
device_remove_file(f_dev, &dev_attr_loading);
err_del_bin_attr:
device_remove_bin_file(f_dev, &firmware_attr_data);
@@ -1129,6 +1164,8 @@
}
#ifdef CONFIG_PM_SLEEP
+static ASYNC_DOMAIN_EXCLUSIVE(fw_cache_domain);
+
static struct fw_cache_entry *alloc_fw_cache_entry(const char *name)
{
struct fw_cache_entry *fce;
@@ -1142,6 +1179,18 @@
return fce;
}
+static int __fw_entry_found(const char *name)
+{
+ struct firmware_cache *fwc = &fw_cache;
+ struct fw_cache_entry *fce;
+
+ list_for_each_entry(fce, &fwc->fw_names, list) {
+ if (!strcmp(fce->name, name))
+ return 1;
+ }
+ return 0;
+}
+
static int fw_cache_piggyback_on_request(const char *name)
{
struct firmware_cache *fwc = &fw_cache;
@@ -1149,10 +1198,8 @@
int ret = 0;
spin_lock(&fwc->name_lock);
- list_for_each_entry(fce, &fwc->fw_names, list) {
- if (!strcmp(fce->name, name))
- goto found;
- }
+ if (__fw_entry_found(name))
+ goto found;
fce = alloc_fw_cache_entry(name);
if (fce) {
@@ -1185,12 +1232,6 @@
free_fw_cache_entry(fce);
}
-
- spin_lock(&fwc->name_lock);
- fwc->cnt--;
- spin_unlock(&fwc->name_lock);
-
- wake_up(&fwc->wait_queue);
}
/* called with dev->devres_lock held */
@@ -1229,11 +1270,19 @@
list_del(&fce->list);
spin_lock(&fwc->name_lock);
- fwc->cnt++;
- list_add(&fce->list, &fwc->fw_names);
+ /* only one cache entry for one firmware */
+ if (!__fw_entry_found(fce->name)) {
+ list_add(&fce->list, &fwc->fw_names);
+ } else {
+ free_fw_cache_entry(fce);
+ fce = NULL;
+ }
spin_unlock(&fwc->name_lock);
- async_schedule(__async_dev_cache_fw_image, (void *)fce);
+ if (fce)
+ async_schedule_domain(__async_dev_cache_fw_image,
+ (void *)fce,
+ &fw_cache_domain);
}
}
@@ -1275,6 +1324,9 @@
pr_debug("%s\n", __func__);
+ /* cancel uncache work */
+ cancel_delayed_work_sync(&fwc->work);
+
/*
* use small loading timeout for caching devices' firmware
* because all these firmware images have been loaded
@@ -1292,21 +1344,7 @@
mutex_unlock(&fw_lock);
/* wait for completion of caching firmware for all devices */
- spin_lock(&fwc->name_lock);
- for (;;) {
- prepare_to_wait(&fwc->wait_queue, &wait,
- TASK_UNINTERRUPTIBLE);
- if (!fwc->cnt)
- break;
-
- spin_unlock(&fwc->name_lock);
-
- schedule();
-
- spin_lock(&fwc->name_lock);
- }
- spin_unlock(&fwc->name_lock);
- finish_wait(&fwc->wait_queue, &wait);
+ async_synchronize_full_domain(&fw_cache_domain);
loading_timeout = old_timeout;
}
@@ -1394,9 +1432,7 @@
#ifdef CONFIG_PM_SLEEP
spin_lock_init(&fw_cache.name_lock);
INIT_LIST_HEAD(&fw_cache.fw_names);
- fw_cache.cnt = 0;
- init_waitqueue_head(&fw_cache.wait_queue);
INIT_DELAYED_WORK(&fw_cache.work,
device_uncache_fw_images_work);
diff --git a/drivers/base/platform.c b/drivers/base/platform.c
index 8727e9c..72c776f 100644
--- a/drivers/base/platform.c
+++ b/drivers/base/platform.c
@@ -83,9 +83,16 @@
*/
int platform_get_irq(struct platform_device *dev, unsigned int num)
{
+#ifdef CONFIG_SPARC
+ /* sparc does not have irqs represented as IORESOURCE_IRQ resources */
+ if (!dev || num >= dev->archdata.num_irqs)
+ return -ENXIO;
+ return dev->archdata.irqs[num];
+#else
struct resource *r = platform_get_resource(dev, IORESOURCE_IRQ, num);
return r ? r->start : -ENXIO;
+#endif
}
EXPORT_SYMBOL_GPL(platform_get_irq);
diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c
index c22b869..96b71b6 100644
--- a/drivers/base/power/domain.c
+++ b/drivers/base/power/domain.c
@@ -1862,7 +1862,7 @@
cpuidle_drv = cpuidle_driver_ref();
if (!cpuidle_drv) {
ret = -ENODEV;
- goto out;
+ goto err_drv;
}
if (cpuidle_drv->state_count <= state) {
ret = -EINVAL;
@@ -1884,6 +1884,9 @@
err:
cpuidle_driver_unref();
+
+ err_drv:
+ kfree(cpu_data);
goto out;
}
diff --git a/drivers/base/power/qos.c b/drivers/base/power/qos.c
index 74a67e0..fbbd4ed 100644
--- a/drivers/base/power/qos.c
+++ b/drivers/base/power/qos.c
@@ -451,7 +451,7 @@
if (ancestor)
error = dev_pm_qos_add_request(ancestor, req, value);
- if (error)
+ if (error < 0)
req->dev = NULL;
return error;
diff --git a/drivers/base/regmap/Kconfig b/drivers/base/regmap/Kconfig
index 6be390b..f0d3054 100644
--- a/drivers/base/regmap/Kconfig
+++ b/drivers/base/regmap/Kconfig
@@ -3,7 +3,7 @@
# subsystems should select the appropriate symbols.
config REGMAP
- default y if (REGMAP_I2C || REGMAP_SPI)
+ default y if (REGMAP_I2C || REGMAP_SPI || REGMAP_MMIO || REGMAP_IRQ)
select LZO_COMPRESS
select LZO_DECOMPRESS
select IRQ_DOMAIN if REGMAP_IRQ
diff --git a/drivers/bcma/main.c b/drivers/bcma/main.c
index 432aeee..d865470 100644
--- a/drivers/bcma/main.c
+++ b/drivers/bcma/main.c
@@ -158,9 +158,10 @@
static void bcma_unregister_cores(struct bcma_bus *bus)
{
- struct bcma_device *core;
+ struct bcma_device *core, *tmp;
- list_for_each_entry(core, &bus->cores, list) {
+ list_for_each_entry_safe(core, tmp, &bus->cores, list) {
+ list_del(&core->list);
if (core->dev_registered)
device_unregister(&core->dev);
}
diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index f529407..824e09c 100644
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -131,6 +131,7 @@
config BLK_CPQ_CISS_DA
tristate "Compaq Smart Array 5xxx support"
depends on PCI
+ select CHECK_SIGNATURE
help
This is the driver for Compaq Smart Array 5xxx controllers.
Everyone using these boards should say Y here.
@@ -166,8 +167,8 @@
module will be called DAC960.
config BLK_DEV_UMEM
- tristate "Micro Memory MM5415 Battery Backed RAM support (EXPERIMENTAL)"
- depends on PCI && EXPERIMENTAL
+ tristate "Micro Memory MM5415 Battery Backed RAM support"
+ depends on PCI
---help---
Saying Y here will include support for the MM5415 family of
battery backed (Non-volatile) RAM cards.
@@ -430,8 +431,8 @@
a disc is opened for writing.
config CDROM_PKTCDVD_WCACHE
- bool "Enable write caching (EXPERIMENTAL)"
- depends on CDROM_PKTCDVD && EXPERIMENTAL
+ bool "Enable write caching"
+ depends on CDROM_PKTCDVD
help
If enabled, write caching will be set for the CD-R/W device. For now
this option is dangerous unless the CD-RW media is known good, as we
@@ -508,8 +509,8 @@
config VIRTIO_BLK
- tristate "Virtio block driver (EXPERIMENTAL)"
- depends on EXPERIMENTAL && VIRTIO
+ tristate "Virtio block driver"
+ depends on VIRTIO
---help---
This is the virtual block driver for virtio. It can be used with
lguest or QEMU based VMMs (like KVM or Xen). Say Y or M.
@@ -528,7 +529,7 @@
config BLK_DEV_RBD
tristate "Rados block device (RBD)"
- depends on INET && EXPERIMENTAL && BLOCK
+ depends on INET && BLOCK
select CEPH_LIB
select LIBCRC32C
select CRYPTO_AES
diff --git a/drivers/block/aoe/aoecmd.c b/drivers/block/aoe/aoecmd.c
index 3804a0a..9fe4f18 100644
--- a/drivers/block/aoe/aoecmd.c
+++ b/drivers/block/aoe/aoecmd.c
@@ -935,7 +935,7 @@
/* cf. http://lkml.org/lkml/2006/10/31/28 */
if (!fastfail)
- q->request_fn(q);
+ __blk_run_queue(q);
}
static void
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index b0f553b..ca83f96 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -5205,7 +5205,6 @@
return;
}
/* write all data in the battery backed cache to disk */
- memset(flush_buf, 0, 4);
return_code = sendcmd_withirq(h, CCISS_CACHE_FLUSH, flush_buf,
4, 0, CTLR_LUNID, TYPE_CMD);
kfree(flush_buf);
diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index 17c675c..2ddd64a 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -4109,12 +4109,19 @@
static struct platform_device floppy_device[N_DRIVE];
+static bool floppy_available(int drive)
+{
+ if (!(allowed_drive_mask & (1 << drive)))
+ return false;
+ if (fdc_state[FDC(drive)].version == FDC_NONE)
+ return false;
+ return true;
+}
+
static struct kobject *floppy_find(dev_t dev, int *part, void *data)
{
int drive = (*part & 3) | ((*part & 0x80) >> 5);
- if (drive >= N_DRIVE ||
- !(allowed_drive_mask & (1 << drive)) ||
- fdc_state[FDC(drive)].version == FDC_NONE)
+ if (drive >= N_DRIVE || !floppy_available(drive))
return NULL;
if (((*part >> 2) & 0x1f) >= ARRAY_SIZE(floppy_type))
return NULL;
@@ -4124,8 +4131,7 @@
static int __init do_floppy_init(void)
{
- int i, unit, drive;
- int err, dr;
+ int i, unit, drive, err;
set_debugt();
interruptjiffies = resultjiffies = jiffies;
@@ -4137,34 +4143,32 @@
raw_cmd = NULL;
- for (dr = 0; dr < N_DRIVE; dr++) {
- disks[dr] = alloc_disk(1);
- if (!disks[dr]) {
+ floppy_wq = alloc_ordered_workqueue("floppy", 0);
+ if (!floppy_wq)
+ return -ENOMEM;
+
+ for (drive = 0; drive < N_DRIVE; drive++) {
+ disks[drive] = alloc_disk(1);
+ if (!disks[drive]) {
err = -ENOMEM;
goto out_put_disk;
}
- floppy_wq = alloc_ordered_workqueue("floppy", 0);
- if (!floppy_wq) {
+ disks[drive]->queue = blk_init_queue(do_fd_request, &floppy_lock);
+ if (!disks[drive]->queue) {
err = -ENOMEM;
goto out_put_disk;
}
- disks[dr]->queue = blk_init_queue(do_fd_request, &floppy_lock);
- if (!disks[dr]->queue) {
- err = -ENOMEM;
- goto out_destroy_workq;
- }
+ blk_queue_max_hw_sectors(disks[drive]->queue, 64);
+ disks[drive]->major = FLOPPY_MAJOR;
+ disks[drive]->first_minor = TOMINOR(drive);
+ disks[drive]->fops = &floppy_fops;
+ sprintf(disks[drive]->disk_name, "fd%d", drive);
- blk_queue_max_hw_sectors(disks[dr]->queue, 64);
- disks[dr]->major = FLOPPY_MAJOR;
- disks[dr]->first_minor = TOMINOR(dr);
- disks[dr]->fops = &floppy_fops;
- sprintf(disks[dr]->disk_name, "fd%d", dr);
-
- init_timer(&motor_off_timer[dr]);
- motor_off_timer[dr].data = dr;
- motor_off_timer[dr].function = motor_off_callback;
+ init_timer(&motor_off_timer[drive]);
+ motor_off_timer[drive].data = drive;
+ motor_off_timer[drive].function = motor_off_callback;
}
err = register_blkdev(FLOPPY_MAJOR, "fd");
@@ -4282,9 +4286,7 @@
}
for (drive = 0; drive < N_DRIVE; drive++) {
- if (!(allowed_drive_mask & (1 << drive)))
- continue;
- if (fdc_state[FDC(drive)].version == FDC_NONE)
+ if (!floppy_available(drive))
continue;
floppy_device[drive].name = floppy_device_name;
@@ -4293,7 +4295,7 @@
err = platform_device_register(&floppy_device[drive]);
if (err)
- goto out_release_dma;
+ goto out_remove_drives;
err = device_create_file(&floppy_device[drive].dev,
&dev_attr_cmos);
@@ -4311,28 +4313,33 @@
out_unreg_platform_dev:
platform_device_unregister(&floppy_device[drive]);
+out_remove_drives:
+ while (drive--) {
+ if (floppy_available(drive)) {
+ del_gendisk(disks[drive]);
+ device_remove_file(&floppy_device[drive].dev, &dev_attr_cmos);
+ platform_device_unregister(&floppy_device[drive]);
+ }
+ }
out_release_dma:
if (atomic_read(&usage_count))
floppy_release_irq_and_dma();
out_unreg_region:
blk_unregister_region(MKDEV(FLOPPY_MAJOR, 0), 256);
platform_driver_unregister(&floppy_driver);
-out_destroy_workq:
- destroy_workqueue(floppy_wq);
out_unreg_blkdev:
unregister_blkdev(FLOPPY_MAJOR, "fd");
out_put_disk:
- while (dr--) {
- del_timer_sync(&motor_off_timer[dr]);
- if (disks[dr]->queue) {
- blk_cleanup_queue(disks[dr]->queue);
- /*
- * put_disk() is not paired with add_disk() and
- * will put queue reference one extra time. fix it.
- */
- disks[dr]->queue = NULL;
+ destroy_workqueue(floppy_wq);
+ for (drive = 0; drive < N_DRIVE; drive++) {
+ if (!disks[drive])
+ break;
+ if (disks[drive]->queue) {
+ del_timer_sync(&motor_off_timer[drive]);
+ blk_cleanup_queue(disks[drive]->queue);
+ disks[drive]->queue = NULL;
}
- put_disk(disks[dr]);
+ put_disk(disks[drive]);
}
return err;
}
@@ -4548,11 +4555,12 @@
unregister_blkdev(FLOPPY_MAJOR, "fd");
platform_driver_unregister(&floppy_driver);
+ destroy_workqueue(floppy_wq);
+
for (drive = 0; drive < N_DRIVE; drive++) {
del_timer_sync(&motor_off_timer[drive]);
- if ((allowed_drive_mask & (1 << drive)) &&
- fdc_state[FDC(drive)].version != FDC_NONE) {
+ if (floppy_available(drive)) {
del_gendisk(disks[drive]);
device_remove_file(&floppy_device[drive].dev, &dev_attr_cmos);
platform_device_unregister(&floppy_device[drive]);
@@ -4572,7 +4580,6 @@
cancel_delayed_work_sync(&fd_timeout);
cancel_delayed_work_sync(&fd_timer);
- destroy_workqueue(floppy_wq);
if (atomic_read(&usage_count))
floppy_release_irq_and_dma();
diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index e9d594f..54046e5 100644
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -976,8 +976,21 @@
if (lo->lo_state != Lo_bound)
return -ENXIO;
- if (lo->lo_refcnt > 1) /* we needed one fd for the ioctl */
- return -EBUSY;
+ /*
+ * If we've explicitly asked to tear down the loop device,
+ * and it has an elevated reference count, set it for auto-teardown when
+ * the last reference goes away. This stops $!~#$@ udev from
+ * preventing teardown because it decided that it needs to run blkid on
+ * the loopback device whenever they appear. xfstests is notorious for
+ * failing tests because blkid via udev races with a losetup
+ * <dev>/do something like mkfs/losetup -d <dev> causing the losetup -d
+ * command to fail with EBUSY.
+ */
+ if (lo->lo_refcnt > 1) {
+ lo->lo_flags |= LO_FLAGS_AUTOCLEAR;
+ mutex_unlock(&lo->lo_ctl_mutex);
+ return 0;
+ }
if (filp == NULL)
return -EINVAL;
diff --git a/drivers/block/mtip32xx/mtip32xx.c b/drivers/block/mtip32xx/mtip32xx.c
index f946d31..9694dd9 100644
--- a/drivers/block/mtip32xx/mtip32xx.c
+++ b/drivers/block/mtip32xx/mtip32xx.c
@@ -559,7 +559,7 @@
struct mtip_cmd *command;
int tag, cmdto_cnt = 0;
unsigned int bit, group;
- unsigned int num_command_slots = port->dd->slot_groups * 32;
+ unsigned int num_command_slots;
unsigned long to, tagaccum[SLOTBITS_IN_LONGS];
if (unlikely(!port))
@@ -572,6 +572,7 @@
}
/* clear the tag accumulator */
memset(tagaccum, 0, SLOTBITS_IN_LONGS * sizeof(long));
+ num_command_slots = port->dd->slot_groups * 32;
for (tag = 0; tag < num_command_slots; tag++) {
/*
@@ -2035,8 +2036,9 @@
}
return rv;
}
-
-static void mtip_set_timeout(struct host_to_dev_fis *fis, unsigned int *timeout)
+static void mtip_set_timeout(struct driver_data *dd,
+ struct host_to_dev_fis *fis,
+ unsigned int *timeout, u8 erasemode)
{
switch (fis->command) {
case ATA_CMD_DOWNLOAD_MICRO:
@@ -2044,7 +2046,10 @@
break;
case ATA_CMD_SEC_ERASE_UNIT:
case 0xFC:
- *timeout = 240000; /* 4 minutes */
+ if (erasemode)
+ *timeout = ((*(dd->port->identify + 90) * 2) * 60000);
+ else
+ *timeout = ((*(dd->port->identify + 89) * 2) * 60000);
break;
case ATA_CMD_STANDBYNOW1:
*timeout = 120000; /* 2 minutes */
@@ -2087,6 +2092,7 @@
unsigned int transfer_size;
unsigned long task_file_data;
int intotal = outtotal + req_task->out_size;
+ int erasemode = 0;
taskout = req_task->out_size;
taskin = req_task->in_size;
@@ -2212,7 +2218,13 @@
fis.lba_hi,
fis.device);
- mtip_set_timeout(&fis, &timeout);
+ /* check for erase mode support during secure erase.*/
+ if ((fis.command == ATA_CMD_SEC_ERASE_UNIT) && outbuf &&
+ (outbuf[0] & MTIP_SEC_ERASE_MODE)) {
+ erasemode = 1;
+ }
+
+ mtip_set_timeout(dd, &fis, &timeout, erasemode);
/* Determine the correct transfer size.*/
if (force_single_sector)
@@ -2428,7 +2440,7 @@
* return value
* None
*/
-static void mtip_hw_submit_io(struct driver_data *dd, sector_t start,
+static void mtip_hw_submit_io(struct driver_data *dd, sector_t sector,
int nsect, int nents, int tag, void *callback,
void *data, int dir)
{
@@ -2436,6 +2448,7 @@
struct mtip_port *port = dd->port;
struct mtip_cmd *command = &port->commands[tag];
int dma_dir = (dir == READ) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
+ u64 start = sector;
/* Map the scatter list for DMA access */
nents = dma_map_sg(&dd->pdev->dev, command->sg, nents, dma_dir);
@@ -2454,8 +2467,12 @@
fis->opts = 1 << 7;
fis->command =
(dir == READ ? ATA_CMD_FPDMA_READ : ATA_CMD_FPDMA_WRITE);
- *((unsigned int *) &fis->lba_low) = (start & 0xFFFFFF);
- *((unsigned int *) &fis->lba_low_ex) = ((start >> 24) & 0xFFFFFF);
+ fis->lba_low = start & 0xFF;
+ fis->lba_mid = (start >> 8) & 0xFF;
+ fis->lba_hi = (start >> 16) & 0xFF;
+ fis->lba_low_ex = (start >> 24) & 0xFF;
+ fis->lba_mid_ex = (start >> 32) & 0xFF;
+ fis->lba_hi_ex = (start >> 40) & 0xFF;
fis->device = 1 << 6;
fis->features = nsect & 0xFF;
fis->features_ex = (nsect >> 8) & 0xFF;
diff --git a/drivers/block/mtip32xx/mtip32xx.h b/drivers/block/mtip32xx/mtip32xx.h
index 18627a1..b174264 100644
--- a/drivers/block/mtip32xx/mtip32xx.h
+++ b/drivers/block/mtip32xx/mtip32xx.h
@@ -33,6 +33,9 @@
/* offset of Device Control register in PCIe extended capabilites space */
#define PCIE_CONFIG_EXT_DEVICE_CONTROL_OFFSET 0x48
+/* check for erase mode support during secure erase */
+#define MTIP_SEC_ERASE_MODE 0x2
+
/* # of times to retry timed out/failed IOs */
#define MTIP_MAX_RETRIES 2
@@ -152,14 +155,14 @@
MTIP_DDF_REBUILD_FAILED_BIT = 8,
};
-__packed struct smart_attr{
+struct smart_attr {
u8 attr_id;
u16 flags;
u8 cur;
u8 worst;
u32 data;
u8 res[3];
-};
+} __packed;
/* Register Frame Information Structure (FIS), host to device. */
struct host_to_dev_fis {
diff --git a/drivers/block/xen-blkback/common.h b/drivers/block/xen-blkback/common.h
index 9ad3b5e..9a54623 100644
--- a/drivers/block/xen-blkback/common.h
+++ b/drivers/block/xen-blkback/common.h
@@ -158,8 +158,8 @@
struct block_device *bdev;
/* Cached size parameter. */
sector_t size;
- bool flush_support;
- bool discard_secure;
+ unsigned int flush_support:1;
+ unsigned int discard_secure:1;
};
struct backend_info;
diff --git a/drivers/block/xen-blkback/xenbus.c b/drivers/block/xen-blkback/xenbus.c
index 4f66171..f58434c 100644
--- a/drivers/block/xen-blkback/xenbus.c
+++ b/drivers/block/xen-blkback/xenbus.c
@@ -105,11 +105,10 @@
{
struct xen_blkif *blkif;
- blkif = kmem_cache_alloc(xen_blkif_cachep, GFP_KERNEL);
+ blkif = kmem_cache_zalloc(xen_blkif_cachep, GFP_KERNEL);
if (!blkif)
return ERR_PTR(-ENOMEM);
- memset(blkif, 0, sizeof(*blkif));
blkif->domid = domid;
spin_lock_init(&blkif->blk_ring_lock);
atomic_set(&blkif->refcnt, 1);
@@ -196,7 +195,7 @@
}
}
-void xen_blkif_free(struct xen_blkif *blkif)
+static void xen_blkif_free(struct xen_blkif *blkif)
{
if (!atomic_dec_and_test(&blkif->refcnt))
BUG();
@@ -257,7 +256,7 @@
VBD_SHOW(physical_device, "%x:%x\n", be->major, be->minor);
VBD_SHOW(mode, "%s\n", be->mode);
-int xenvbd_sysfs_addif(struct xenbus_device *dev)
+static int xenvbd_sysfs_addif(struct xenbus_device *dev)
{
int error;
@@ -281,7 +280,7 @@
return error;
}
-void xenvbd_sysfs_delif(struct xenbus_device *dev)
+static void xenvbd_sysfs_delif(struct xenbus_device *dev)
{
sysfs_remove_group(&dev->dev.kobj, &xen_vbdstat_group);
device_remove_file(&dev->dev, &dev_attr_mode);
diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index fc2de55..b00000e 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -67,6 +67,7 @@
{ USB_DEVICE(0x13d3, 0x3304) },
{ USB_DEVICE(0x0930, 0x0215) },
{ USB_DEVICE(0x0489, 0xE03D) },
+ { USB_DEVICE(0x0489, 0xE027) },
/* Atheros AR9285 Malbec with sflash firmware */
{ USB_DEVICE(0x03F0, 0x311D) },
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index debda27..ee82f2f 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -124,6 +124,7 @@
{ USB_DEVICE(0x13d3, 0x3304), .driver_info = BTUSB_IGNORE },
{ USB_DEVICE(0x0930, 0x0215), .driver_info = BTUSB_IGNORE },
{ USB_DEVICE(0x0489, 0xe03d), .driver_info = BTUSB_IGNORE },
+ { USB_DEVICE(0x0489, 0xe027), .driver_info = BTUSB_IGNORE },
/* Atheros AR9285 Malbec with sflash firmware */
{ USB_DEVICE(0x03f0, 0x311d), .driver_info = BTUSB_IGNORE },
diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c
index c8abce3..ed0fade 100644
--- a/drivers/bluetooth/hci_ldisc.c
+++ b/drivers/bluetooth/hci_ldisc.c
@@ -270,15 +270,10 @@
*/
static int hci_uart_tty_open(struct tty_struct *tty)
{
- struct hci_uart *hu = (void *) tty->disc_data;
+ struct hci_uart *hu;
BT_DBG("tty %p", tty);
- /* FIXME: This btw is bogus, nothing requires the old ldisc to clear
- the pointer */
- if (hu)
- return -EEXIST;
-
/* Error if the tty has no write op instead of leaving an exploitable
hole */
if (tty->ops->write == NULL)
diff --git a/drivers/bus/omap-ocp2scp.c b/drivers/bus/omap-ocp2scp.c
index ff63560..0c48b0e 100644
--- a/drivers/bus/omap-ocp2scp.c
+++ b/drivers/bus/omap-ocp2scp.c
@@ -22,6 +22,26 @@
#include <linux/pm_runtime.h>
#include <linux/of.h>
#include <linux/of_platform.h>
+#include <linux/platform_data/omap_ocp2scp.h>
+
+/**
+ * _count_resources - count for the number of resources
+ * @res: struct resource *
+ *
+ * Count and return the number of resources populated for the device that is
+ * connected to ocp2scp.
+ */
+static unsigned _count_resources(struct resource *res)
+{
+ int cnt = 0;
+
+ while (res->start != res->end) {
+ cnt++;
+ res++;
+ }
+
+ return cnt;
+}
static int ocp2scp_remove_devices(struct device *dev, void *c)
{
@@ -34,20 +54,62 @@
static int __devinit omap_ocp2scp_probe(struct platform_device *pdev)
{
- int ret;
- struct device_node *np = pdev->dev.of_node;
+ int ret;
+ unsigned res_cnt, i;
+ struct device_node *np = pdev->dev.of_node;
+ struct platform_device *pdev_child;
+ struct omap_ocp2scp_platform_data *pdata = pdev->dev.platform_data;
+ struct omap_ocp2scp_dev *dev;
if (np) {
ret = of_platform_populate(np, NULL, NULL, &pdev->dev);
if (ret) {
- dev_err(&pdev->dev, "failed to add resources for ocp2scp child\n");
+ dev_err(&pdev->dev,
+ "failed to add resources for ocp2scp child\n");
goto err0;
}
+ } else if (pdata) {
+ for (i = 0, dev = *pdata->devices; i < pdata->dev_cnt; i++,
+ dev++) {
+ res_cnt = _count_resources(dev->res);
+
+ pdev_child = platform_device_alloc(dev->drv_name,
+ PLATFORM_DEVID_AUTO);
+ if (!pdev_child) {
+ dev_err(&pdev->dev,
+ "failed to allocate mem for ocp2scp child\n");
+ goto err0;
+ }
+
+ ret = platform_device_add_resources(pdev_child,
+ dev->res, res_cnt);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "failed to add resources for ocp2scp child\n");
+ goto err1;
+ }
+
+ pdev_child->dev.parent = &pdev->dev;
+
+ ret = platform_device_add(pdev_child);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "failed to register ocp2scp child device\n");
+ goto err1;
+ }
+ }
+ } else {
+ dev_err(&pdev->dev, "OCP2SCP initialized without plat data\n");
+ return -EINVAL;
}
+
pm_runtime_enable(&pdev->dev);
return 0;
+err1:
+ platform_device_put(pdev_child);
+
err0:
device_for_each_child(&pdev->dev, NULL, ocp2scp_remove_devices);
diff --git a/drivers/char/hw_random/omap-rng.c b/drivers/char/hw_random/omap-rng.c
index a5effd8..45e467d 100644
--- a/drivers/char/hw_random/omap-rng.c
+++ b/drivers/char/hw_random/omap-rng.c
@@ -27,8 +27,6 @@
#include <asm/io.h>
-#include <plat/cpu.h>
-
#define RNG_OUT_REG 0x00 /* Output register */
#define RNG_STAT_REG 0x04 /* Status register
[0] = STAT_BUSY */
diff --git a/drivers/char/sonypi.c b/drivers/char/sonypi.c
index 320debb..9b4f011 100644
--- a/drivers/char/sonypi.c
+++ b/drivers/char/sonypi.c
@@ -1456,7 +1456,7 @@
return 0;
}
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
static int old_camera_power;
static int sonypi_suspend(struct device *dev)
diff --git a/drivers/clk/clk-bcm2835.c b/drivers/clk/clk-bcm2835.c
index 67ad16b..59e0fd8 100644
--- a/drivers/clk/clk-bcm2835.c
+++ b/drivers/clk/clk-bcm2835.c
@@ -55,5 +55,5 @@
pr_err("uart1_pclk not registered\n");
ret = clk_register_clkdev(clk, NULL, "20215000.uart");
if (ret)
- pr_err("uart0_pclk alias not registered\n");
+ pr_err("uart1_pclk alias not registered\n");
}
diff --git a/drivers/clk/ux500/u8500_clk.c b/drivers/clk/ux500/u8500_clk.c
index ca4a25e..e2c17d1 100644
--- a/drivers/clk/ux500/u8500_clk.c
+++ b/drivers/clk/ux500/u8500_clk.c
@@ -40,7 +40,7 @@
CLK_IS_ROOT|CLK_IGNORE_UNUSED,
32768);
clk_register_clkdev(clk, "clk32k", NULL);
- clk_register_clkdev(clk, NULL, "rtc-pl031");
+ clk_register_clkdev(clk, "apb_pclk", "rtc-pl031");
/* PRCMU clocks */
fw_version = prcmu_get_fw_version();
@@ -228,10 +228,17 @@
clk = clk_reg_prcc_pclk("p1_pclk2", "per1clk", U8500_CLKRST1_BASE,
BIT(2), 0);
+ clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.1");
+
clk = clk_reg_prcc_pclk("p1_pclk3", "per1clk", U8500_CLKRST1_BASE,
BIT(3), 0);
+ clk_register_clkdev(clk, "apb_pclk", "msp0");
+ clk_register_clkdev(clk, "apb_pclk", "ux500-msp-i2s.0");
+
clk = clk_reg_prcc_pclk("p1_pclk4", "per1clk", U8500_CLKRST1_BASE,
BIT(4), 0);
+ clk_register_clkdev(clk, "apb_pclk", "msp1");
+ clk_register_clkdev(clk, "apb_pclk", "ux500-msp-i2s.1");
clk = clk_reg_prcc_pclk("p1_pclk5", "per1clk", U8500_CLKRST1_BASE,
BIT(5), 0);
@@ -239,6 +246,7 @@
clk = clk_reg_prcc_pclk("p1_pclk6", "per1clk", U8500_CLKRST1_BASE,
BIT(6), 0);
+ clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.2");
clk = clk_reg_prcc_pclk("p1_pclk7", "per1clk", U8500_CLKRST1_BASE,
BIT(7), 0);
@@ -246,6 +254,7 @@
clk = clk_reg_prcc_pclk("p1_pclk8", "per1clk", U8500_CLKRST1_BASE,
BIT(8), 0);
+ clk_register_clkdev(clk, "apb_pclk", "slimbus0");
clk = clk_reg_prcc_pclk("p1_pclk9", "per1clk", U8500_CLKRST1_BASE,
BIT(9), 0);
@@ -255,11 +264,16 @@
clk = clk_reg_prcc_pclk("p1_pclk10", "per1clk", U8500_CLKRST1_BASE,
BIT(10), 0);
+ clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.4");
+
clk = clk_reg_prcc_pclk("p1_pclk11", "per1clk", U8500_CLKRST1_BASE,
BIT(11), 0);
+ clk_register_clkdev(clk, "apb_pclk", "msp3");
+ clk_register_clkdev(clk, "apb_pclk", "ux500-msp-i2s.3");
clk = clk_reg_prcc_pclk("p2_pclk0", "per2clk", U8500_CLKRST2_BASE,
BIT(0), 0);
+ clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.3");
clk = clk_reg_prcc_pclk("p2_pclk1", "per2clk", U8500_CLKRST2_BASE,
BIT(1), 0);
@@ -279,12 +293,13 @@
clk = clk_reg_prcc_pclk("p2_pclk5", "per2clk", U8500_CLKRST2_BASE,
BIT(5), 0);
+ clk_register_clkdev(clk, "apb_pclk", "msp2");
+ clk_register_clkdev(clk, "apb_pclk", "ux500-msp-i2s.2");
clk = clk_reg_prcc_pclk("p2_pclk6", "per2clk", U8500_CLKRST2_BASE,
BIT(6), 0);
clk_register_clkdev(clk, "apb_pclk", "sdi1");
-
clk = clk_reg_prcc_pclk("p2_pclk7", "per2clk", U8500_CLKRST2_BASE,
BIT(7), 0);
clk_register_clkdev(clk, "apb_pclk", "sdi3");
@@ -316,10 +331,15 @@
clk = clk_reg_prcc_pclk("p3_pclk1", "per3clk", U8500_CLKRST3_BASE,
BIT(1), 0);
+ clk_register_clkdev(clk, "apb_pclk", "ssp0");
+
clk = clk_reg_prcc_pclk("p3_pclk2", "per3clk", U8500_CLKRST3_BASE,
BIT(2), 0);
+ clk_register_clkdev(clk, "apb_pclk", "ssp1");
+
clk = clk_reg_prcc_pclk("p3_pclk3", "per3clk", U8500_CLKRST3_BASE,
BIT(3), 0);
+ clk_register_clkdev(clk, "apb_pclk", "nmk-i2c.0");
clk = clk_reg_prcc_pclk("p3_pclk4", "per3clk", U8500_CLKRST3_BASE,
BIT(4), 0);
@@ -401,10 +421,17 @@
clk = clk_reg_prcc_kclk("p1_i2c1_kclk", "i2cclk",
U8500_CLKRST1_BASE, BIT(2), CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "nmk-i2c.1");
+
clk = clk_reg_prcc_kclk("p1_msp0_kclk", "msp02clk",
U8500_CLKRST1_BASE, BIT(3), CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "msp0");
+ clk_register_clkdev(clk, NULL, "ux500-msp-i2s.0");
+
clk = clk_reg_prcc_kclk("p1_msp1_kclk", "msp1clk",
U8500_CLKRST1_BASE, BIT(4), CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "msp1");
+ clk_register_clkdev(clk, NULL, "ux500-msp-i2s.1");
clk = clk_reg_prcc_kclk("p1_sdi0_kclk", "sdmmcclk",
U8500_CLKRST1_BASE, BIT(5), CLK_SET_RATE_GATE);
@@ -412,17 +439,25 @@
clk = clk_reg_prcc_kclk("p1_i2c2_kclk", "i2cclk",
U8500_CLKRST1_BASE, BIT(6), CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "nmk-i2c.2");
+
clk = clk_reg_prcc_kclk("p1_slimbus0_kclk", "slimclk",
- U8500_CLKRST1_BASE, BIT(3), CLK_SET_RATE_GATE);
- /* FIXME: Redefinition of BIT(3). */
+ U8500_CLKRST1_BASE, BIT(8), CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "slimbus0");
+
clk = clk_reg_prcc_kclk("p1_i2c4_kclk", "i2cclk",
U8500_CLKRST1_BASE, BIT(9), CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "nmk-i2c.4");
+
clk = clk_reg_prcc_kclk("p1_msp3_kclk", "msp1clk",
U8500_CLKRST1_BASE, BIT(10), CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "msp3");
+ clk_register_clkdev(clk, NULL, "ux500-msp-i2s.3");
/* Periph2 */
clk = clk_reg_prcc_kclk("p2_i2c3_kclk", "i2cclk",
U8500_CLKRST2_BASE, BIT(0), CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "nmk-i2c.3");
clk = clk_reg_prcc_kclk("p2_sdi4_kclk", "sdmmcclk",
U8500_CLKRST2_BASE, BIT(2), CLK_SET_RATE_GATE);
@@ -430,6 +465,8 @@
clk = clk_reg_prcc_kclk("p2_msp2_kclk", "msp02clk",
U8500_CLKRST2_BASE, BIT(3), CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "msp2");
+ clk_register_clkdev(clk, NULL, "ux500-msp-i2s.2");
clk = clk_reg_prcc_kclk("p2_sdi1_kclk", "sdmmcclk",
U8500_CLKRST2_BASE, BIT(4), CLK_SET_RATE_GATE);
@@ -450,10 +487,15 @@
/* Periph3 */
clk = clk_reg_prcc_kclk("p3_ssp0_kclk", "sspclk",
U8500_CLKRST3_BASE, BIT(1), CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "ssp0");
+
clk = clk_reg_prcc_kclk("p3_ssp1_kclk", "sspclk",
U8500_CLKRST3_BASE, BIT(2), CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "ssp1");
+
clk = clk_reg_prcc_kclk("p3_i2c0_kclk", "i2cclk",
U8500_CLKRST3_BASE, BIT(3), CLK_SET_RATE_GATE);
+ clk_register_clkdev(clk, NULL, "nmk-i2c.0");
clk = clk_reg_prcc_kclk("p3_sdi2_kclk", "sdmmcclk",
U8500_CLKRST3_BASE, BIT(4), CLK_SET_RATE_GATE);
diff --git a/drivers/cpufreq/cpufreq_stats.c b/drivers/cpufreq/cpufreq_stats.c
index b40ee14..3998316 100644
--- a/drivers/cpufreq/cpufreq_stats.c
+++ b/drivers/cpufreq/cpufreq_stats.c
@@ -328,6 +328,7 @@
cpufreq_update_policy(cpu);
break;
case CPU_DOWN_PREPARE:
+ case CPU_DOWN_PREPARE_FROZEN:
cpufreq_stats_free_sysfs(cpu);
break;
case CPU_DEAD:
diff --git a/drivers/cpufreq/powernow-k8.c b/drivers/cpufreq/powernow-k8.c
index 129e80b..e3ebb4f 100644
--- a/drivers/cpufreq/powernow-k8.c
+++ b/drivers/cpufreq/powernow-k8.c
@@ -5,7 +5,7 @@
* http://www.gnu.org/licenses/gpl.html
*
* Maintainer:
- * Andreas Herrmann <andreas.herrmann3@amd.com>
+ * Andreas Herrmann <herrmann.der.user@googlemail.com>
*
* Based on the powernow-k7.c module written by Dave Jones.
* (C) 2003 Dave Jones on behalf of SuSE Labs
@@ -1052,14 +1052,7 @@
struct powernowk8_target_arg pta = { .pol = pol, .targfreq = targfreq,
.relation = relation };
- /*
- * Must run on @pol->cpu. cpufreq core is responsible for ensuring
- * that we're bound to the current CPU and pol->cpu stays online.
- */
- if (smp_processor_id() == pol->cpu)
- return powernowk8_target_fn(&pta);
- else
- return work_on_cpu(pol->cpu, powernowk8_target_fn, &pta);
+ return work_on_cpu(pol->cpu, powernowk8_target_fn, &pta);
}
/* Driver entry point to verify the policy and range of frequencies */
diff --git a/drivers/crypto/omap-aes.c b/drivers/crypto/omap-aes.c
index 093a8af..649a146 100644
--- a/drivers/crypto/omap-aes.c
+++ b/drivers/crypto/omap-aes.c
@@ -29,8 +29,7 @@
#include <crypto/scatterwalk.h>
#include <crypto/aes.h>
-#include <plat/cpu.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
/* OMAP TRM gives bitfields as start:end, where start is the higher bit
number. For example 7:0 */
@@ -941,11 +940,6 @@
{
pr_info("loading %s driver\n", "omap-aes");
- if (!cpu_class_is_omap2() || omap_type() != OMAP2_DEVICE_TYPE_SEC) {
- pr_err("Unsupported cpu\n");
- return -ENODEV;
- }
-
return platform_driver_register(&omap_aes_driver);
}
diff --git a/drivers/crypto/omap-sham.c b/drivers/crypto/omap-sham.c
index a3fd6fc..d76fe06 100644
--- a/drivers/crypto/omap-sham.c
+++ b/drivers/crypto/omap-sham.c
@@ -37,8 +37,7 @@
#include <crypto/hash.h>
#include <crypto/internal/hash.h>
-#include <plat/cpu.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
#include <mach/irqs.h>
#define SHA_REG_DIGEST(x) (0x00 + ((x) * 0x04))
@@ -1289,13 +1288,6 @@
{
pr_info("loading %s driver\n", "omap-sham");
- if (!cpu_class_is_omap2() ||
- (omap_type() != OMAP2_DEVICE_TYPE_SEC &&
- omap_type() != OMAP2_DEVICE_TYPE_EMU)) {
- pr_err("Unsupported cpu\n");
- return -ENODEV;
- }
-
return platform_driver_register(&omap_sham_driver);
}
diff --git a/drivers/crypto/tegra-aes.c b/drivers/crypto/tegra-aes.c
index 37185e6..e69f3bc 100644
--- a/drivers/crypto/tegra-aes.c
+++ b/drivers/crypto/tegra-aes.c
@@ -41,8 +41,6 @@
#include <linux/completion.h>
#include <linux/workqueue.h>
-#include <mach/clk.h>
-
#include <crypto/scatterwalk.h>
#include <crypto/aes.h>
#include <crypto/internal/rng.h>
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index 677cd6e..d4c1218 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -90,6 +90,17 @@
Support the Synopsys DesignWare AHB DMA controller. This
can be integrated in chips such as the Atmel AT32ap7000.
+config DW_DMAC_BIG_ENDIAN_IO
+ bool "Use big endian I/O register access"
+ default y if AVR32
+ depends on DW_DMAC
+ help
+ Say yes here to use big endian I/O access when reading and writing
+ to the DMA controller registers. This is needed on some platforms,
+ like the Atmel AVR32 architecture.
+
+ If unsure, use the default setting.
+
config AT_HDMAC
tristate "Atmel AHB DMA support"
depends on ARCH_AT91
diff --git a/drivers/dma/dw_dmac_regs.h b/drivers/dma/dw_dmac_regs.h
index ff39fa6..8896559 100644
--- a/drivers/dma/dw_dmac_regs.h
+++ b/drivers/dma/dw_dmac_regs.h
@@ -98,9 +98,17 @@
u32 DW_PARAMS;
};
+#ifdef CONFIG_DW_DMAC_BIG_ENDIAN_IO
+#define dma_readl_native ioread32be
+#define dma_writel_native iowrite32be
+#else
+#define dma_readl_native readl
+#define dma_writel_native writel
+#endif
+
/* To access the registers in early stage of probe */
#define dma_read_byaddr(addr, name) \
- readl((addr) + offsetof(struct dw_dma_regs, name))
+ dma_readl_native((addr) + offsetof(struct dw_dma_regs, name))
/* Bitfields in DW_PARAMS */
#define DW_PARAMS_NR_CHAN 8 /* number of channels */
@@ -216,9 +224,9 @@
}
#define channel_readl(dwc, name) \
- readl(&(__dwc_regs(dwc)->name))
+ dma_readl_native(&(__dwc_regs(dwc)->name))
#define channel_writel(dwc, name, val) \
- writel((val), &(__dwc_regs(dwc)->name))
+ dma_writel_native((val), &(__dwc_regs(dwc)->name))
static inline struct dw_dma_chan *to_dw_dma_chan(struct dma_chan *chan)
{
@@ -246,9 +254,9 @@
}
#define dma_readl(dw, name) \
- readl(&(__dw_regs(dw)->name))
+ dma_readl_native(&(__dw_regs(dw)->name))
#define dma_writel(dw, name, val) \
- writel((val), &(__dw_regs(dw)->name))
+ dma_writel_native((val), &(__dw_regs(dw)->name))
#define channel_set_bit(dw, reg, mask) \
dma_writel(dw, reg, ((mask) << 8) | (mask))
diff --git a/drivers/dma/imx-dma.c b/drivers/dma/imx-dma.c
index f11b5b2b..dbf0e6f 100644
--- a/drivers/dma/imx-dma.c
+++ b/drivers/dma/imx-dma.c
@@ -29,7 +29,6 @@
#include <asm/irq.h>
#include <linux/platform_data/dma-imx.h>
-#include <mach/hardware.h>
#include "dmaengine.h"
#define IMXDMA_MAX_CHAN_DESCRIPTORS 16
@@ -167,6 +166,12 @@
int slot_2d;
};
+enum imx_dma_type {
+ IMX1_DMA,
+ IMX21_DMA,
+ IMX27_DMA,
+};
+
struct imxdma_engine {
struct device *dev;
struct device_dma_parameters dma_parms;
@@ -177,8 +182,40 @@
spinlock_t lock;
struct imx_dma_2d_config slots_2d[IMX_DMA_2D_SLOTS];
struct imxdma_channel channel[IMX_DMA_CHANNELS];
+ enum imx_dma_type devtype;
};
+static struct platform_device_id imx_dma_devtype[] = {
+ {
+ .name = "imx1-dma",
+ .driver_data = IMX1_DMA,
+ }, {
+ .name = "imx21-dma",
+ .driver_data = IMX21_DMA,
+ }, {
+ .name = "imx27-dma",
+ .driver_data = IMX27_DMA,
+ }, {
+ /* sentinel */
+ }
+};
+MODULE_DEVICE_TABLE(platform, imx_dma_devtype);
+
+static inline int is_imx1_dma(struct imxdma_engine *imxdma)
+{
+ return imxdma->devtype == IMX1_DMA;
+}
+
+static inline int is_imx21_dma(struct imxdma_engine *imxdma)
+{
+ return imxdma->devtype == IMX21_DMA;
+}
+
+static inline int is_imx27_dma(struct imxdma_engine *imxdma)
+{
+ return imxdma->devtype == IMX27_DMA;
+}
+
static struct imxdma_channel *to_imxdma_chan(struct dma_chan *chan)
{
return container_of(chan, struct imxdma_channel, chan);
@@ -212,7 +249,9 @@
static int imxdma_hw_chain(struct imxdma_channel *imxdmac)
{
- if (cpu_is_mx27())
+ struct imxdma_engine *imxdma = imxdmac->imxdma;
+
+ if (is_imx27_dma(imxdma))
return imxdmac->hw_chaining;
else
return 0;
@@ -267,7 +306,7 @@
imx_dmav1_writel(imxdma, imx_dmav1_readl(imxdma, DMA_CCR(channel)) |
CCR_CEN | CCR_ACRPT, DMA_CCR(channel));
- if ((cpu_is_mx21() || cpu_is_mx27()) &&
+ if (!is_imx1_dma(imxdma) &&
d->sg && imxdma_hw_chain(imxdmac)) {
d->sg = sg_next(d->sg);
if (d->sg) {
@@ -436,7 +475,7 @@
struct imxdma_engine *imxdma = dev_id;
int i, disr;
- if (cpu_is_mx21() || cpu_is_mx27())
+ if (!is_imx1_dma(imxdma))
imxdma_err_handler(irq, dev_id);
disr = imx_dmav1_readl(imxdma, DMA_DISR);
@@ -474,8 +513,10 @@
slot = i;
break;
}
- if (slot < 0)
+ if (slot < 0) {
+ spin_unlock_irqrestore(&imxdma->lock, flags);
return -EBUSY;
+ }
imxdma->slots_2d[slot].xsr = d->x;
imxdma->slots_2d[slot].ysr = d->y;
@@ -959,35 +1000,32 @@
static int __init imxdma_probe(struct platform_device *pdev)
{
struct imxdma_engine *imxdma;
+ struct resource *res;
int ret, i;
+ int irq, irq_err;
-
- imxdma = kzalloc(sizeof(*imxdma), GFP_KERNEL);
+ imxdma = devm_kzalloc(&pdev->dev, sizeof(*imxdma), GFP_KERNEL);
if (!imxdma)
return -ENOMEM;
- if (cpu_is_mx1()) {
- imxdma->base = MX1_IO_ADDRESS(MX1_DMA_BASE_ADDR);
- } else if (cpu_is_mx21()) {
- imxdma->base = MX21_IO_ADDRESS(MX21_DMA_BASE_ADDR);
- } else if (cpu_is_mx27()) {
- imxdma->base = MX27_IO_ADDRESS(MX27_DMA_BASE_ADDR);
- } else {
- kfree(imxdma);
- return 0;
- }
+ imxdma->devtype = pdev->id_entry->driver_data;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ imxdma->base = devm_request_and_ioremap(&pdev->dev, res);
+ if (!imxdma->base)
+ return -EADDRNOTAVAIL;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return irq;
imxdma->dma_ipg = devm_clk_get(&pdev->dev, "ipg");
- if (IS_ERR(imxdma->dma_ipg)) {
- ret = PTR_ERR(imxdma->dma_ipg);
- goto err_clk;
- }
+ if (IS_ERR(imxdma->dma_ipg))
+ return PTR_ERR(imxdma->dma_ipg);
imxdma->dma_ahb = devm_clk_get(&pdev->dev, "ahb");
- if (IS_ERR(imxdma->dma_ahb)) {
- ret = PTR_ERR(imxdma->dma_ahb);
- goto err_clk;
- }
+ if (IS_ERR(imxdma->dma_ahb))
+ return PTR_ERR(imxdma->dma_ahb);
clk_prepare_enable(imxdma->dma_ipg);
clk_prepare_enable(imxdma->dma_ahb);
@@ -995,18 +1033,25 @@
/* reset DMA module */
imx_dmav1_writel(imxdma, DCR_DRST, DMA_DCR);
- if (cpu_is_mx1()) {
- ret = request_irq(MX1_DMA_INT, dma_irq_handler, 0, "DMA", imxdma);
+ if (is_imx1_dma(imxdma)) {
+ ret = devm_request_irq(&pdev->dev, irq,
+ dma_irq_handler, 0, "DMA", imxdma);
if (ret) {
dev_warn(imxdma->dev, "Can't register IRQ for DMA\n");
- goto err_enable;
+ goto err;
}
- ret = request_irq(MX1_DMA_ERR, imxdma_err_handler, 0, "DMA", imxdma);
+ irq_err = platform_get_irq(pdev, 1);
+ if (irq_err < 0) {
+ ret = irq_err;
+ goto err;
+ }
+
+ ret = devm_request_irq(&pdev->dev, irq_err,
+ imxdma_err_handler, 0, "DMA", imxdma);
if (ret) {
dev_warn(imxdma->dev, "Can't register ERRIRQ for DMA\n");
- free_irq(MX1_DMA_INT, NULL);
- goto err_enable;
+ goto err;
}
}
@@ -1036,14 +1081,14 @@
for (i = 0; i < IMX_DMA_CHANNELS; i++) {
struct imxdma_channel *imxdmac = &imxdma->channel[i];
- if (cpu_is_mx21() || cpu_is_mx27()) {
- ret = request_irq(MX2x_INT_DMACH0 + i,
+ if (!is_imx1_dma(imxdma)) {
+ ret = devm_request_irq(&pdev->dev, irq + i,
dma_irq_handler, 0, "DMA", imxdma);
if (ret) {
dev_warn(imxdma->dev, "Can't register IRQ %d "
"for DMA channel %d\n",
- MX2x_INT_DMACH0 + i, i);
- goto err_init;
+ irq + i, i);
+ goto err;
}
init_timer(&imxdmac->watchdog);
imxdmac->watchdog.function = &imxdma_watchdog;
@@ -1089,46 +1134,25 @@
ret = dma_async_device_register(&imxdma->dma_device);
if (ret) {
dev_err(&pdev->dev, "unable to register\n");
- goto err_init;
+ goto err;
}
return 0;
-err_init:
-
- if (cpu_is_mx21() || cpu_is_mx27()) {
- while (--i >= 0)
- free_irq(MX2x_INT_DMACH0 + i, NULL);
- } else if cpu_is_mx1() {
- free_irq(MX1_DMA_INT, NULL);
- free_irq(MX1_DMA_ERR, NULL);
- }
-err_enable:
+err:
clk_disable_unprepare(imxdma->dma_ipg);
clk_disable_unprepare(imxdma->dma_ahb);
-err_clk:
- kfree(imxdma);
return ret;
}
static int __exit imxdma_remove(struct platform_device *pdev)
{
struct imxdma_engine *imxdma = platform_get_drvdata(pdev);
- int i;
dma_async_device_unregister(&imxdma->dma_device);
- if (cpu_is_mx21() || cpu_is_mx27()) {
- for (i = 0; i < IMX_DMA_CHANNELS; i++)
- free_irq(MX2x_INT_DMACH0 + i, NULL);
- } else if cpu_is_mx1() {
- free_irq(MX1_DMA_INT, NULL);
- free_irq(MX1_DMA_ERR, NULL);
- }
-
clk_disable_unprepare(imxdma->dma_ipg);
clk_disable_unprepare(imxdma->dma_ahb);
- kfree(imxdma);
return 0;
}
@@ -1137,6 +1161,7 @@
.driver = {
.name = "imx-dma",
},
+ .id_table = imx_dma_devtype,
.remove = __exit_p(imxdma_remove),
};
diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index c099ca0..f082aa3 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -40,7 +40,6 @@
#include <asm/irq.h>
#include <linux/platform_data/dma-imx-sdma.h>
#include <linux/platform_data/dma-imx.h>
-#include <mach/hardware.h>
#include "dmaengine.h"
diff --git a/drivers/dma/ipu/ipu_idmac.c b/drivers/dma/ipu/ipu_idmac.c
index c7573e5..6585537 100644
--- a/drivers/dma/ipu/ipu_idmac.c
+++ b/drivers/dma/ipu/ipu_idmac.c
@@ -22,8 +22,7 @@
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/module.h>
-
-#include <mach/ipu.h>
+#include <linux/dma/ipu-dma.h>
#include "../dmaengine.h"
#include "ipu_intern.h"
diff --git a/drivers/dma/ipu/ipu_irq.c b/drivers/dma/ipu/ipu_irq.c
index fa95bcc..a5ee37d 100644
--- a/drivers/dma/ipu/ipu_irq.c
+++ b/drivers/dma/ipu/ipu_irq.c
@@ -15,8 +15,7 @@
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/module.h>
-
-#include <mach/ipu.h>
+#include <linux/dma/ipu-dma.h>
#include "ipu_intern.h"
diff --git a/drivers/dma/omap-dma.c b/drivers/dma/omap-dma.c
index bb2d8e7..7d35c23 100644
--- a/drivers/dma/omap-dma.c
+++ b/drivers/dma/omap-dma.c
@@ -19,8 +19,7 @@
#include "virt-dma.h"
-#include <plat/cpu.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
struct omap_dmadev {
struct dma_device ddev;
@@ -438,7 +437,7 @@
omap_disable_dma_irq(c->dma_ch, OMAP_DMA_BLOCK_IRQ);
}
- if (!cpu_class_is_omap1()) {
+ if (dma_omap2plus()) {
omap_set_dma_src_burst_mode(c->dma_ch, OMAP_DMA_DATA_BURST_16);
omap_set_dma_dest_burst_mode(c->dma_ch, OMAP_DMA_DATA_BURST_16);
}
diff --git a/drivers/dma/sirf-dma.c b/drivers/dma/sirf-dma.c
index 64385cd..d451caa 100644
--- a/drivers/dma/sirf-dma.c
+++ b/drivers/dma/sirf-dma.c
@@ -109,7 +109,7 @@
sdesc = list_first_entry(&schan->queued, struct sirfsoc_dma_desc,
node);
/* Move the first queued descriptor to active list */
- list_move_tail(&schan->queued, &schan->active);
+ list_move_tail(&sdesc->node, &schan->active);
/* Start the DMA transfer */
writel_relaxed(sdesc->width, sdma->base + SIRFSOC_DMA_WIDTH_0 +
@@ -428,7 +428,7 @@
unsigned long iflags;
int ret;
- if ((xt->dir != DMA_MEM_TO_DEV) || (xt->dir != DMA_DEV_TO_MEM)) {
+ if ((xt->dir != DMA_MEM_TO_DEV) && (xt->dir != DMA_DEV_TO_MEM)) {
ret = -EINVAL;
goto err_dir;
}
diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index 5a297a2..cc8e7c7 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -170,8 +170,11 @@
* memory controller and apply to register. Search for the first
* bandwidth entry that is greater or equal than the setting requested
* and program that. If at last entry, turn off DRAM scrubbing.
+ *
+ * If no suitable bandwidth is found, turn off DRAM scrubbing entirely
+ * by falling back to the last element in scrubrates[].
*/
- for (i = 0; i < ARRAY_SIZE(scrubrates); i++) {
+ for (i = 0; i < ARRAY_SIZE(scrubrates) - 1; i++) {
/*
* skip scrub rates which aren't recommended
* (see F10 BKDG, F3x58)
@@ -181,12 +184,6 @@
if (scrubrates[i].bandwidth <= new_bw)
break;
-
- /*
- * if no suitable bandwidth found, turn off DRAM scrubbing
- * entirely by falling back to the last element in the
- * scrubrates array.
- */
}
scrubval = scrubrates[i].scrubval;
diff --git a/drivers/edac/amd64_edac.h b/drivers/edac/amd64_edac.h
index 8d48047..8c41396 100644
--- a/drivers/edac/amd64_edac.h
+++ b/drivers/edac/amd64_edac.h
@@ -33,7 +33,7 @@
* detection. The mods to Rev F required more family
* information detection.
*
- * Changes/Fixes by Borislav Petkov <borislav.petkov@amd.com>:
+ * Changes/Fixes by Borislav Petkov <bp@alien8.de>:
* - misc fixes and code cleanups
*
* This module is based on the following documents
diff --git a/drivers/edac/edac_stub.c b/drivers/edac/edac_stub.c
index 6c86f6e..351945f 100644
--- a/drivers/edac/edac_stub.c
+++ b/drivers/edac/edac_stub.c
@@ -5,7 +5,7 @@
*
* 2007 (c) MontaVista Software, Inc.
* 2010 (c) Advanced Micro Devices Inc.
- * Borislav Petkov <borislav.petkov@amd.com>
+ * Borislav Petkov <bp@alien8.de>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
diff --git a/drivers/edac/mce_amd_inj.c b/drivers/edac/mce_amd_inj.c
index 66b5151..2ae78f2 100644
--- a/drivers/edac/mce_amd_inj.c
+++ b/drivers/edac/mce_amd_inj.c
@@ -6,7 +6,7 @@
* This file may be distributed under the terms of the GNU General Public
* License version 2.
*
- * Copyright (c) 2010: Borislav Petkov <borislav.petkov@amd.com>
+ * Copyright (c) 2010: Borislav Petkov <bp@alien8.de>
* Advanced Micro Devices Inc.
*/
@@ -168,6 +168,6 @@
module_exit(edac_exit_mce_inject);
MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Borislav Petkov <borislav.petkov@amd.com>");
+MODULE_AUTHOR("Borislav Petkov <bp@alien8.de>");
MODULE_AUTHOR("AMD Inc.");
MODULE_DESCRIPTION("MCE injection facility for testing MCE decoding");
diff --git a/drivers/extcon/extcon-adc-jack.c b/drivers/extcon/extcon-adc-jack.c
index 725eb5a..e87196f 100644
--- a/drivers/extcon/extcon-adc-jack.c
+++ b/drivers/extcon/extcon-adc-jack.c
@@ -14,6 +14,7 @@
*
*/
+#include <linux/module.h>
#include <linux/slab.h>
#include <linux/device.h>
#include <linux/platform_device.h>
@@ -161,13 +162,12 @@
err = request_any_context_irq(data->irq, adc_jack_irq_thread,
pdata->irq_flags, pdata->name, data);
- if (err) {
+ if (err < 0) {
dev_err(&pdev->dev, "error: irq %d\n", data->irq);
- err = -EINVAL;
goto err_irq;
}
- goto out;
+ return 0;
err_irq:
extcon_dev_unregister(&data->edev);
@@ -196,3 +196,7 @@
};
module_platform_driver(adc_jack_driver);
+
+MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>");
+MODULE_DESCRIPTION("ADC Jack extcon driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/extcon/extcon-class.c b/drivers/extcon/extcon-class.c
index 946a318..d398821 100644
--- a/drivers/extcon/extcon-class.c
+++ b/drivers/extcon/extcon-class.c
@@ -41,7 +41,7 @@
* every single port-type of the following cable names. Please choose cable
* names that are actually used in your extcon device.
*/
-const char *extcon_cable_name[] = {
+const char extcon_cable_name[][CABLE_NAME_MAX + 1] = {
[EXTCON_USB] = "USB",
[EXTCON_USB_HOST] = "USB-Host",
[EXTCON_TA] = "TA",
@@ -62,8 +62,6 @@
[EXTCON_VIDEO_IN] = "Video-in",
[EXTCON_VIDEO_OUT] = "Video-out",
[EXTCON_MECHANICAL] = "Mechanical",
-
- NULL,
};
static struct class *extcon_class;
@@ -91,17 +89,13 @@
return 0;
for (i = 0; edev->mutually_exclusive[i]; i++) {
- int count = 0, j;
+ int weight;
u32 correspondants = new_state & edev->mutually_exclusive[i];
- u32 exp = 1;
- for (j = 0; j < 32; j++) {
- if (exp & correspondants)
- count++;
- if (count > 1)
- return i + 1;
- exp <<= 1;
- }
+ /* calculate the total number of bits set */
+ weight = hweight32(correspondants);
+ if (weight > 1)
+ return i + 1;
}
return 0;
@@ -362,7 +356,7 @@
EXPORT_SYMBOL_GPL(extcon_get_cable_state);
/**
- * extcon_get_cable_state_() - Set the status of a specific cable.
+ * extcon_set_cable_state_() - Set the status of a specific cable.
* @edev: the extcon device that has the cable.
* @index: cable index that can be retrieved by extcon_find_cable_index().
* @cable_state: the new cable status. The default semantics is
@@ -382,7 +376,7 @@
EXPORT_SYMBOL_GPL(extcon_set_cable_state_);
/**
- * extcon_get_cable_state() - Set the status of a specific cable.
+ * extcon_set_cable_state() - Set the status of a specific cable.
* @edev: the extcon device that has the cable.
* @cable_name: cable name.
* @cable_state: the new cable status. The default semantics is
@@ -447,6 +441,8 @@
* extcon device.
* @obj: an empty extcon_specific_cable_nb object to be returned.
* @extcon_name: the name of extcon device.
+ * if NULL, extcon_register_interest will register
+ * every cable with the target cable_name given.
* @cable_name: the target cable name.
* @nb: the notifier block to get notified.
*
@@ -466,22 +462,44 @@
const char *extcon_name, const char *cable_name,
struct notifier_block *nb)
{
- if (!obj || !extcon_name || !cable_name || !nb)
+ if (!obj || !cable_name || !nb)
return -EINVAL;
- obj->edev = extcon_get_extcon_dev(extcon_name);
- if (!obj->edev)
+ if (extcon_name) {
+ obj->edev = extcon_get_extcon_dev(extcon_name);
+ if (!obj->edev)
+ return -ENODEV;
+
+ obj->cable_index = extcon_find_cable_index(obj->edev, cable_name);
+ if (obj->cable_index < 0)
+ return -ENODEV;
+
+ obj->user_nb = nb;
+
+ obj->internal_nb.notifier_call = _call_per_cable;
+
+ return raw_notifier_chain_register(&obj->edev->nh, &obj->internal_nb);
+ } else {
+ struct class_dev_iter iter;
+ struct extcon_dev *extd;
+ struct device *dev;
+
+ if (!extcon_class)
+ return -ENODEV;
+ class_dev_iter_init(&iter, extcon_class, NULL, NULL);
+ while ((dev = class_dev_iter_next(&iter))) {
+ extd = (struct extcon_dev *)dev_get_drvdata(dev);
+
+ if (extcon_find_cable_index(extd, cable_name) < 0)
+ continue;
+
+ class_dev_iter_exit(&iter);
+ return extcon_register_interest(obj, extd->name,
+ cable_name, nb);
+ }
+
return -ENODEV;
-
- obj->cable_index = extcon_find_cable_index(obj->edev, cable_name);
- if (obj->cable_index < 0)
- return -ENODEV;
-
- obj->user_nb = nb;
-
- obj->internal_nb.notifier_call = _call_per_cable;
-
- return raw_notifier_chain_register(&obj->edev->nh, &obj->internal_nb);
+ }
}
/**
@@ -551,43 +569,9 @@
return 0;
}
-static void extcon_cleanup(struct extcon_dev *edev, bool skip)
-{
- mutex_lock(&extcon_dev_list_lock);
- list_del(&edev->entry);
- mutex_unlock(&extcon_dev_list_lock);
-
- if (!skip && get_device(edev->dev)) {
- int index;
-
- if (edev->mutually_exclusive && edev->max_supported) {
- for (index = 0; edev->mutually_exclusive[index];
- index++)
- kfree(edev->d_attrs_muex[index].attr.name);
- kfree(edev->d_attrs_muex);
- kfree(edev->attrs_muex);
- }
-
- for (index = 0; index < edev->max_supported; index++)
- kfree(edev->cables[index].attr_g.name);
-
- if (edev->max_supported) {
- kfree(edev->extcon_dev_type.groups);
- kfree(edev->cables);
- }
-
- device_unregister(edev->dev);
- put_device(edev->dev);
- }
-
- kfree(edev->dev);
-}
-
static void extcon_dev_release(struct device *dev)
{
- struct extcon_dev *edev = (struct extcon_dev *) dev_get_drvdata(dev);
-
- extcon_cleanup(edev, true);
+ kfree(dev);
}
static const char *muex_name = "mutually_exclusive";
@@ -813,7 +797,40 @@
*/
void extcon_dev_unregister(struct extcon_dev *edev)
{
- extcon_cleanup(edev, false);
+ int index;
+
+ mutex_lock(&extcon_dev_list_lock);
+ list_del(&edev->entry);
+ mutex_unlock(&extcon_dev_list_lock);
+
+ if (IS_ERR_OR_NULL(get_device(edev->dev))) {
+ dev_err(edev->dev, "Failed to unregister extcon_dev (%s)\n",
+ dev_name(edev->dev));
+ return;
+ }
+
+ if (edev->mutually_exclusive && edev->max_supported) {
+ for (index = 0; edev->mutually_exclusive[index];
+ index++)
+ kfree(edev->d_attrs_muex[index].attr.name);
+ kfree(edev->d_attrs_muex);
+ kfree(edev->attrs_muex);
+ }
+
+ for (index = 0; index < edev->max_supported; index++)
+ kfree(edev->cables[index].attr_g.name);
+
+ if (edev->max_supported) {
+ kfree(edev->extcon_dev_type.groups);
+ kfree(edev->cables);
+ }
+
+#if defined(CONFIG_ANDROID)
+ if (switch_class)
+ class_compat_remove_link(switch_class, edev->dev, NULL);
+#endif
+ device_unregister(edev->dev);
+ put_device(edev->dev);
}
EXPORT_SYMBOL_GPL(extcon_dev_unregister);
@@ -825,6 +842,9 @@
static void __exit extcon_class_exit(void)
{
+#if defined(CONFIG_ANDROID)
+ class_compat_unregister(switch_class);
+#endif
class_destroy(extcon_class);
}
module_exit(extcon_class_exit);
diff --git a/drivers/extcon/extcon-gpio.c b/drivers/extcon/extcon-gpio.c
index 3cc152e..71d3ab7 100644
--- a/drivers/extcon/extcon-gpio.c
+++ b/drivers/extcon/extcon-gpio.c
@@ -26,7 +26,6 @@
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
-#include <linux/extcon.h>
#include <linux/workqueue.h>
#include <linux/gpio.h>
#include <linux/extcon.h>
diff --git a/drivers/extcon/extcon-max77693.c b/drivers/extcon/extcon-max77693.c
index e21387e..a17d0d9 100644
--- a/drivers/extcon/extcon-max77693.c
+++ b/drivers/extcon/extcon-max77693.c
@@ -239,25 +239,19 @@
static int max77693_muic_set_debounce_time(struct max77693_muic_info *info,
enum max77693_muic_adc_debounce_time time)
{
- int ret = 0;
- u8 ctrl3;
+ int ret;
switch (time) {
case ADC_DEBOUNCE_TIME_5MS:
case ADC_DEBOUNCE_TIME_10MS:
case ADC_DEBOUNCE_TIME_25MS:
case ADC_DEBOUNCE_TIME_38_62MS:
- ret = max77693_read_reg(info->max77693->regmap_muic,
- MAX77693_MUIC_REG_CTRL3, &ctrl3);
- ctrl3 &= ~CONTROL3_ADCDBSET_MASK;
- ctrl3 |= (time << CONTROL3_ADCDBSET_SHIFT);
-
- ret = max77693_write_reg(info->max77693->regmap_muic,
- MAX77693_MUIC_REG_CTRL3, ctrl3);
- if (ret) {
+ ret = max77693_update_reg(info->max77693->regmap_muic,
+ MAX77693_MUIC_REG_CTRL3,
+ time << CONTROL3_ADCDBSET_SHIFT,
+ CONTROL3_ADCDBSET_MASK);
+ if (ret)
dev_err(info->dev, "failed to set ADC debounce time\n");
- ret = -EINVAL;
- }
break;
default:
dev_err(info->dev, "invalid ADC debounce time\n");
@@ -657,6 +651,8 @@
static int __devinit max77693_muic_probe(struct platform_device *pdev)
{
struct max77693_dev *max77693 = dev_get_drvdata(pdev->dev.parent);
+ struct max77693_platform_data *pdata = dev_get_platdata(max77693->dev);
+ struct max77693_muic_platform_data *muic_pdata = pdata->muic_data;
struct max77693_muic_info *info;
int ret, i;
u8 id;
@@ -727,6 +723,31 @@
goto err_extcon;
}
+ /* Initialize MUIC register by using platform data */
+ for (i = 0 ; i < muic_pdata->num_init_data ; i++) {
+ enum max77693_irq_source irq_src = MAX77693_IRQ_GROUP_NR;
+
+ max77693_write_reg(info->max77693->regmap_muic,
+ muic_pdata->init_data[i].addr,
+ muic_pdata->init_data[i].data);
+
+ switch (muic_pdata->init_data[i].addr) {
+ case MAX77693_MUIC_REG_INTMASK1:
+ irq_src = MUIC_INT1;
+ break;
+ case MAX77693_MUIC_REG_INTMASK2:
+ irq_src = MUIC_INT2;
+ break;
+ case MAX77693_MUIC_REG_INTMASK3:
+ irq_src = MUIC_INT3;
+ break;
+ }
+
+ if (irq_src < MAX77693_IRQ_GROUP_NR)
+ info->max77693->irq_masks_cur[irq_src]
+ = muic_pdata->init_data[i].data;
+ }
+
/* Check revision number of MUIC device*/
ret = max77693_read_reg(info->max77693->regmap_muic,
MAX77693_MUIC_REG_ID, &id);
@@ -762,6 +783,7 @@
free_irq(muic_irqs[i].virq, info);
cancel_work_sync(&info->irq_work);
extcon_dev_unregister(info->edev);
+ kfree(info->edev);
kfree(info);
return 0;
diff --git a/drivers/extcon/extcon-max8997.c b/drivers/extcon/extcon-max8997.c
index ef9090a..77b66b0 100644
--- a/drivers/extcon/extcon-max8997.c
+++ b/drivers/extcon/extcon-max8997.c
@@ -271,8 +271,6 @@
static int max8997_muic_handle_charger_type_detach(
struct max8997_muic_info *info)
{
- int ret = 0;
-
switch (info->pre_charger_type) {
case MAX8997_CHARGER_TYPE_USB:
extcon_set_cable_state(info->edev, "USB", false);
@@ -290,11 +288,11 @@
extcon_set_cable_state(info->edev, "Fast-charger", false);
break;
default:
- ret = -EINVAL;
+ return -EINVAL;
break;
}
- return ret;
+ return 0;
}
static int max8997_muic_handle_charger_type(struct max8997_muic_info *info,
diff --git a/drivers/firewire/sbp2.c b/drivers/firewire/sbp2.c
index 1162d6b..bb1b392 100644
--- a/drivers/firewire/sbp2.c
+++ b/drivers/firewire/sbp2.c
@@ -1546,6 +1546,8 @@
struct sbp2_logical_unit *lu = sdev->hostdata;
sdev->use_10_for_rw = 1;
+ sdev->no_report_opcodes = 1;
+ sdev->no_write_same = 1;
if (sbp2_param_exclusive_login)
sdev->manage_start_stop = 1;
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index d055cee..47150f5 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -47,7 +47,7 @@
config OF_GPIO
def_bool y
- depends on OF && !SPARC
+ depends on OF
config DEBUG_GPIO
bool "Debug GPIO calls"
@@ -466,7 +466,7 @@
config GPIO_ADNP
tristate "Avionic Design N-bit GPIO expander"
- depends on I2C && OF
+ depends on I2C && OF_GPIO
help
This option enables support for N GPIOs found on Avionic Design
I2C GPIO expanders. The register space will be extended by powers
diff --git a/drivers/gpio/gpio-74x164.c b/drivers/gpio/gpio-74x164.c
index ed3e551..f05e542 100644
--- a/drivers/gpio/gpio-74x164.c
+++ b/drivers/gpio/gpio-74x164.c
@@ -153,7 +153,7 @@
}
chip->gpio_chip.ngpio = GEN_74X164_NUMBER_GPIOS * chip->registers;
- chip->buffer = devm_kzalloc(&spi->dev, chip->gpio_chip.ngpio, GFP_KERNEL);
+ chip->buffer = devm_kzalloc(&spi->dev, chip->registers, GFP_KERNEL);
if (!chip->buffer) {
ret = -ENOMEM;
goto exit_destroy;
diff --git a/drivers/gpio/gpio-mcp23s08.c b/drivers/gpio/gpio-mcp23s08.c
index 0f42518..ce1c847 100644
--- a/drivers/gpio/gpio-mcp23s08.c
+++ b/drivers/gpio/gpio-mcp23s08.c
@@ -77,7 +77,7 @@
/*----------------------------------------------------------------------*/
-#ifdef CONFIG_I2C
+#if IS_ENABLED(CONFIG_I2C)
static int mcp23008_read(struct mcp23s08 *mcp, unsigned reg)
{
@@ -399,7 +399,7 @@
break;
#endif /* CONFIG_SPI_MASTER */
-#ifdef CONFIG_I2C
+#if IS_ENABLED(CONFIG_I2C)
case MCP_TYPE_008:
mcp->ops = &mcp23008_ops;
mcp->chip.ngpio = 8;
@@ -473,7 +473,7 @@
/*----------------------------------------------------------------------*/
-#ifdef CONFIG_I2C
+#if IS_ENABLED(CONFIG_I2C)
static int __devinit mcp230xx_probe(struct i2c_client *client,
const struct i2c_device_id *id)
diff --git a/drivers/gpio/gpio-mvebu.c b/drivers/gpio/gpio-mvebu.c
index 7a87412..be65c04 100644
--- a/drivers/gpio/gpio-mvebu.c
+++ b/drivers/gpio/gpio-mvebu.c
@@ -92,6 +92,11 @@
return mvchip->membase + GPIO_OUT_OFF;
}
+static inline void __iomem *mvebu_gpioreg_blink(struct mvebu_gpio_chip *mvchip)
+{
+ return mvchip->membase + GPIO_BLINK_EN_OFF;
+}
+
static inline void __iomem *mvebu_gpioreg_io_conf(struct mvebu_gpio_chip *mvchip)
{
return mvchip->membase + GPIO_IO_CONF_OFF;
@@ -206,6 +211,23 @@
return (u >> pin) & 1;
}
+static void mvebu_gpio_blink(struct gpio_chip *chip, unsigned pin, int value)
+{
+ struct mvebu_gpio_chip *mvchip =
+ container_of(chip, struct mvebu_gpio_chip, chip);
+ unsigned long flags;
+ u32 u;
+
+ spin_lock_irqsave(&mvchip->lock, flags);
+ u = readl_relaxed(mvebu_gpioreg_blink(mvchip));
+ if (value)
+ u |= 1 << pin;
+ else
+ u &= ~(1 << pin);
+ writel_relaxed(u, mvebu_gpioreg_blink(mvchip));
+ spin_unlock_irqrestore(&mvchip->lock, flags);
+}
+
static int mvebu_gpio_direction_input(struct gpio_chip *chip, unsigned pin)
{
struct mvebu_gpio_chip *mvchip =
@@ -244,6 +266,9 @@
if (ret)
return ret;
+ mvebu_gpio_blink(chip, pin, 0);
+ mvebu_gpio_set(chip, pin, value);
+
spin_lock_irqsave(&mvchip->lock, flags);
u = readl_relaxed(mvebu_gpioreg_io_conf(mvchip));
u &= ~(1 << pin);
@@ -644,7 +669,7 @@
ct->handler = handle_edge_irq;
ct->chip.name = mvchip->chip.label;
- irq_setup_generic_chip(gc, IRQ_MSK(ngpios), IRQ_GC_INIT_MASK_CACHE,
+ irq_setup_generic_chip(gc, IRQ_MSK(ngpios), 0,
IRQ_NOREQUEST, IRQ_LEVEL | IRQ_NOPROBE);
/* Setup irq domain on top of the generic chip. */
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index 94cbc84..d335af1 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -251,6 +251,40 @@
}
}
+/**
+ * _clear_gpio_debounce - clear debounce settings for a gpio
+ * @bank: the gpio bank we're acting upon
+ * @gpio: the gpio number on this @gpio
+ *
+ * If a gpio is using debounce, then clear the debounce enable bit and if
+ * this is the only gpio in this bank using debounce, then clear the debounce
+ * time too. The debounce clock will also be disabled when calling this function
+ * if this is the only gpio in the bank using debounce.
+ */
+static void _clear_gpio_debounce(struct gpio_bank *bank, unsigned gpio)
+{
+ u32 gpio_bit = GPIO_BIT(bank, gpio);
+
+ if (!bank->dbck_flag)
+ return;
+
+ if (!(bank->dbck_enable_mask & gpio_bit))
+ return;
+
+ bank->dbck_enable_mask &= ~gpio_bit;
+ bank->context.debounce_en &= ~gpio_bit;
+ __raw_writel(bank->context.debounce_en,
+ bank->base + bank->regs->debounce_en);
+
+ if (!bank->dbck_enable_mask) {
+ bank->context.debounce = 0;
+ __raw_writel(bank->context.debounce, bank->base +
+ bank->regs->debounce);
+ clk_disable(bank->dbck);
+ bank->dbck_enabled = false;
+ }
+}
+
static inline void set_gpio_trigger(struct gpio_bank *bank, int gpio,
unsigned trigger)
{
@@ -539,6 +573,7 @@
_set_gpio_irqenable(bank, gpio, 0);
_clear_gpio_irqstatus(bank, gpio);
_set_gpio_triggering(bank, GPIO_INDEX(bank, gpio), IRQ_TYPE_NONE);
+ _clear_gpio_debounce(bank, gpio);
}
/* Use disable_irq_wake() and enable_irq_wake() functions from drivers */
diff --git a/drivers/gpio/gpio-pxa.c b/drivers/gpio/gpio-pxa.c
index 98d52cb..6ab8afb 100644
--- a/drivers/gpio/gpio-pxa.c
+++ b/drivers/gpio/gpio-pxa.c
@@ -448,7 +448,7 @@
} else if (cpu_is_pxa27x()) {
count = 120;
gpio_type = PXA27X_GPIO;
- } else if (cpu_is_pxa93x() || cpu_is_pxa95x()) {
+ } else if (cpu_is_pxa93x()) {
count = 191;
gpio_type = PXA93X_GPIO;
} else if (cpu_is_pxa3xx()) {
diff --git a/drivers/gpio/gpio-timberdale.c b/drivers/gpio/gpio-timberdale.c
index 031c6ad..1a3e2b9 100644
--- a/drivers/gpio/gpio-timberdale.c
+++ b/drivers/gpio/gpio-timberdale.c
@@ -116,7 +116,7 @@
unsigned long flags;
spin_lock_irqsave(&tgpio->lock, flags);
- tgpio->last_ier &= ~(1 << offset);
+ tgpio->last_ier &= ~(1UL << offset);
iowrite32(tgpio->last_ier, tgpio->membase + TGPIO_IER);
spin_unlock_irqrestore(&tgpio->lock, flags);
}
@@ -128,7 +128,7 @@
unsigned long flags;
spin_lock_irqsave(&tgpio->lock, flags);
- tgpio->last_ier |= 1 << offset;
+ tgpio->last_ier |= 1UL << offset;
iowrite32(tgpio->last_ier, tgpio->membase + TGPIO_IER);
spin_unlock_irqrestore(&tgpio->lock, flags);
}
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 5d6c71e..1c8d9e3 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -623,9 +623,11 @@
*/
status = gpio_request(gpio, "sysfs");
- if (status < 0)
+ if (status < 0) {
+ if (status == -EPROBE_DEFER)
+ status = -ENODEV;
goto done;
-
+ }
status = gpio_export(gpio, true);
if (status < 0)
gpio_free(gpio);
@@ -1191,8 +1193,10 @@
spin_lock_irqsave(&gpio_lock, flags);
- if (!gpio_is_valid(gpio))
+ if (!gpio_is_valid(gpio)) {
+ status = -EINVAL;
goto done;
+ }
desc = &gpio_desc[gpio];
chip = desc->chip;
if (chip == NULL)
diff --git a/drivers/gpu/drm/drm_fb_cma_helper.c b/drivers/gpu/drm/drm_fb_cma_helper.c
index 09e11a5..fd9d0af4d 100644
--- a/drivers/gpu/drm/drm_fb_cma_helper.c
+++ b/drivers/gpu/drm/drm_fb_cma_helper.c
@@ -206,7 +206,7 @@
size_t size;
int ret;
- DRM_DEBUG_KMS("surface width(%d), height(%d) and bpp(%d\n",
+ DRM_DEBUG_KMS("surface width(%d), height(%d) and bpp(%d)\n",
sizes->surface_width, sizes->surface_height,
sizes->surface_bpp);
@@ -220,7 +220,7 @@
size = mode_cmd.pitches[0] * mode_cmd.height;
obj = drm_gem_cma_create(dev, size);
- if (!obj)
+ if (IS_ERR(obj))
return -ENOMEM;
fbi = framebuffer_alloc(0, dev->dev);
diff --git a/drivers/gpu/drm/drm_fops.c b/drivers/gpu/drm/drm_fops.c
index 7ef1b67..133b413 100644
--- a/drivers/gpu/drm/drm_fops.c
+++ b/drivers/gpu/drm/drm_fops.c
@@ -121,6 +121,8 @@
int minor_id = iminor(inode);
struct drm_minor *minor;
int retcode = 0;
+ int need_setup = 0;
+ struct address_space *old_mapping;
minor = idr_find(&drm_minors_idr, minor_id);
if (!minor)
@@ -132,23 +134,37 @@
if (drm_device_is_unplugged(dev))
return -ENODEV;
- retcode = drm_open_helper(inode, filp, dev);
- if (!retcode) {
- atomic_inc(&dev->counts[_DRM_STAT_OPENS]);
- if (!dev->open_count++)
- retcode = drm_setup(dev);
- }
- if (!retcode) {
- mutex_lock(&dev->struct_mutex);
- if (dev->dev_mapping == NULL)
- dev->dev_mapping = &inode->i_data;
- /* ihold ensures nobody can remove inode with our i_data */
- ihold(container_of(dev->dev_mapping, struct inode, i_data));
- inode->i_mapping = dev->dev_mapping;
- filp->f_mapping = dev->dev_mapping;
- mutex_unlock(&dev->struct_mutex);
- }
+ if (!dev->open_count++)
+ need_setup = 1;
+ mutex_lock(&dev->struct_mutex);
+ old_mapping = dev->dev_mapping;
+ if (old_mapping == NULL)
+ dev->dev_mapping = &inode->i_data;
+ /* ihold ensures nobody can remove inode with our i_data */
+ ihold(container_of(dev->dev_mapping, struct inode, i_data));
+ inode->i_mapping = dev->dev_mapping;
+ filp->f_mapping = dev->dev_mapping;
+ mutex_unlock(&dev->struct_mutex);
+ retcode = drm_open_helper(inode, filp, dev);
+ if (retcode)
+ goto err_undo;
+ atomic_inc(&dev->counts[_DRM_STAT_OPENS]);
+ if (need_setup) {
+ retcode = drm_setup(dev);
+ if (retcode)
+ goto err_undo;
+ }
+ return 0;
+
+err_undo:
+ mutex_lock(&dev->struct_mutex);
+ filp->f_mapping = old_mapping;
+ inode->i_mapping = old_mapping;
+ iput(container_of(dev->dev_mapping, struct inode, i_data));
+ dev->dev_mapping = old_mapping;
+ mutex_unlock(&dev->struct_mutex);
+ dev->open_count--;
return retcode;
}
EXPORT_SYMBOL(drm_open);
diff --git a/drivers/gpu/drm/drm_info.c b/drivers/gpu/drm/drm_info.c
index 441ebc1..d4b20ce 100644
--- a/drivers/gpu/drm/drm_info.c
+++ b/drivers/gpu/drm/drm_info.c
@@ -205,8 +205,6 @@
struct drm_gem_object *obj = ptr;
struct seq_file *m = data;
- seq_printf(m, "name %d size %zd\n", obj->name, obj->size);
-
seq_printf(m, "%6d %8zd %7d %8d\n",
obj->name, obj->size,
atomic_read(&obj->handle_count),
diff --git a/drivers/gpu/drm/drm_platform.c b/drivers/gpu/drm/drm_platform.c
index aaeb6f8..b8a282ea 100644
--- a/drivers/gpu/drm/drm_platform.c
+++ b/drivers/gpu/drm/drm_platform.c
@@ -64,7 +64,6 @@
}
if (drm_core_check_feature(dev, DRIVER_MODESET)) {
- dev_set_drvdata(&platdev->dev, dev);
ret = drm_get_minor(dev, &dev->control, DRM_MINOR_CONTROL);
if (ret)
goto err_g1;
diff --git a/drivers/gpu/drm/exynos/Kconfig b/drivers/gpu/drm/exynos/Kconfig
index 59a26e5..fc345d4 100644
--- a/drivers/gpu/drm/exynos/Kconfig
+++ b/drivers/gpu/drm/exynos/Kconfig
@@ -1,6 +1,6 @@
config DRM_EXYNOS
tristate "DRM Support for Samsung SoC EXYNOS Series"
- depends on DRM && PLAT_SAMSUNG
+ depends on DRM && (PLAT_SAMSUNG || ARCH_MULTIPLATFORM)
select DRM_KMS_HELPER
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
diff --git a/drivers/gpu/drm/exynos/exynos_drm_connector.c b/drivers/gpu/drm/exynos/exynos_drm_connector.c
index 18c2718..0f68a28 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_connector.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_connector.c
@@ -374,6 +374,7 @@
exynos_connector->encoder_id = encoder->base.id;
exynos_connector->manager = manager;
exynos_connector->dpms = DRM_MODE_DPMS_OFF;
+ connector->dpms = DRM_MODE_DPMS_OFF;
connector->encoder = encoder;
err = drm_mode_connector_attach_encoder(connector, encoder);
diff --git a/drivers/gpu/drm/exynos/exynos_drm_encoder.c b/drivers/gpu/drm/exynos/exynos_drm_encoder.c
index e51503f..241ad1e 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_encoder.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_encoder.c
@@ -43,12 +43,14 @@
* @manager: specific encoder has its own manager to control a hardware
* appropriately and we can access a hardware drawing on this manager.
* @dpms: store the encoder dpms value.
+ * @updated: indicate whether overlay data updating is needed or not.
*/
struct exynos_drm_encoder {
struct drm_crtc *old_crtc;
struct drm_encoder drm_encoder;
struct exynos_drm_manager *manager;
- int dpms;
+ int dpms;
+ bool updated;
};
static void exynos_drm_connector_power(struct drm_encoder *encoder, int mode)
@@ -85,7 +87,9 @@
switch (mode) {
case DRM_MODE_DPMS_ON:
if (manager_ops && manager_ops->apply)
- manager_ops->apply(manager->dev);
+ if (!exynos_encoder->updated)
+ manager_ops->apply(manager->dev);
+
exynos_drm_connector_power(encoder, mode);
exynos_encoder->dpms = mode;
break;
@@ -94,6 +98,7 @@
case DRM_MODE_DPMS_OFF:
exynos_drm_connector_power(encoder, mode);
exynos_encoder->dpms = mode;
+ exynos_encoder->updated = false;
break;
default:
DRM_ERROR("unspecified mode %d\n", mode);
@@ -205,13 +210,22 @@
static void exynos_drm_encoder_commit(struct drm_encoder *encoder)
{
- struct exynos_drm_manager *manager = exynos_drm_get_manager(encoder);
+ struct exynos_drm_encoder *exynos_encoder = to_exynos_encoder(encoder);
+ struct exynos_drm_manager *manager = exynos_encoder->manager;
struct exynos_drm_manager_ops *manager_ops = manager->ops;
DRM_DEBUG_KMS("%s\n", __FILE__);
if (manager_ops && manager_ops->commit)
manager_ops->commit(manager->dev);
+
+ /*
+ * this will avoid one issue that overlay data is updated to
+ * real hardware two times.
+ * And this variable will be used to check if the data was
+ * already updated or not by exynos_drm_encoder_dpms function.
+ */
+ exynos_encoder->updated = true;
}
static void exynos_drm_encoder_disable(struct drm_encoder *encoder)
@@ -401,19 +415,6 @@
manager_ops->dpms(manager->dev, mode);
/*
- * set current mode to new one so that data aren't updated into
- * registers by drm_helper_connector_dpms two times.
- *
- * in case that drm_crtc_helper_set_mode() is called,
- * overlay_ops->commit() and manager_ops->commit() callbacks
- * can be called two times, first at drm_crtc_helper_set_mode()
- * and second at drm_helper_connector_dpms().
- * so with this setting, when drm_helper_connector_dpms() is called
- * encoder->funcs->dpms() will be ignored.
- */
- exynos_encoder->dpms = mode;
-
- /*
* if this condition is ok then it means that the crtc is already
* detached from encoder and last function for detaching is properly
* done, so clear pipe from manager to prevent repeated call.
diff --git a/drivers/gpu/drm/exynos/exynos_mixer.c b/drivers/gpu/drm/exynos/exynos_mixer.c
index 614b2e9..e7fbb82 100644
--- a/drivers/gpu/drm/exynos/exynos_mixer.c
+++ b/drivers/gpu/drm/exynos/exynos_mixer.c
@@ -1142,7 +1142,7 @@
const struct of_device_id *match;
match = of_match_node(of_match_ptr(mixer_match_types),
pdev->dev.of_node);
- drv = match->data;
+ drv = (struct mixer_drv_data *)match->data;
} else {
drv = (struct mixer_drv_data *)
platform_get_device_id(pdev)->driver_data;
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index c9bfd83..61ae104 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -1505,7 +1505,8 @@
goto put_gmch;
}
- i915_kick_out_firmware_fb(dev_priv);
+ if (drm_core_check_feature(dev, DRIVER_MODESET))
+ i915_kick_out_firmware_fb(dev_priv);
pci_set_master(dev->pdev);
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index aac4e5e..6770ee6 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -118,6 +118,13 @@
MODULE_PARM_DESC(i915_enable_ppgtt,
"Enable PPGTT (default: true)");
+unsigned int i915_preliminary_hw_support __read_mostly = 0;
+module_param_named(preliminary_hw_support, i915_preliminary_hw_support, int, 0600);
+MODULE_PARM_DESC(preliminary_hw_support,
+ "Enable preliminary hardware support. "
+ "Enable Haswell and ValleyView Support. "
+ "(default: false)");
+
static struct drm_driver driver;
extern int intel_agp_enabled;
@@ -826,6 +833,12 @@
struct intel_device_info *intel_info =
(struct intel_device_info *) ent->driver_data;
+ if (intel_info->is_haswell || intel_info->is_valleyview)
+ if(!i915_preliminary_hw_support) {
+ DRM_ERROR("Preliminary hardware support disabled\n");
+ return -ENODEV;
+ }
+
/* Only bind to function 0 of the device. Early generations
* used function 1 as a placeholder for multi-head. This causes
* us confusion instead, especially on the systems where both
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index b84f786..f511fa2 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -1217,6 +1217,7 @@
extern int i915_enable_fbc __read_mostly;
extern bool i915_enable_hangcheck __read_mostly;
extern int i915_enable_ppgtt __read_mostly;
+extern unsigned int i915_preliminary_hw_support __read_mostly;
extern int i915_suspend(struct drm_device *dev, pm_message_t state);
extern int i915_resume(struct drm_device *dev);
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index d33d02d..107f09b 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -1407,8 +1407,10 @@
return VM_FAULT_NOPAGE;
case -ENOMEM:
return VM_FAULT_OOM;
+ case -ENOSPC:
+ return VM_FAULT_SIGBUS;
default:
- WARN_ON_ONCE(ret);
+ WARN_ONCE(ret, "unhandled error in i915_gem_fault: %i\n", ret);
return VM_FAULT_SIGBUS;
}
}
@@ -1822,10 +1824,11 @@
sg_set_page(sg, page, PAGE_SIZE, 0);
}
+ obj->pages = st;
+
if (i915_gem_object_needs_bit17_swizzle(obj))
i915_gem_object_do_bit_17_swizzle(obj);
- obj->pages = st;
return 0;
err_pages:
diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index 893f301..6345878 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -143,7 +143,7 @@
int old_dpms;
/* PCH platforms and VLV only support on/off. */
- if (INTEL_INFO(dev)->gen < 5 && mode != DRM_MODE_DPMS_ON)
+ if (INTEL_INFO(dev)->gen >= 5 && mode != DRM_MODE_DPMS_ON)
mode = DRM_MODE_DPMS_OFF;
if (mode == connector->dpms)
@@ -219,20 +219,7 @@
intel_encoder_to_crt(to_intel_encoder(encoder));
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
struct drm_i915_private *dev_priv = dev->dev_private;
- int dpll_md_reg;
- u32 adpa, dpll_md;
-
- dpll_md_reg = DPLL_MD(intel_crtc->pipe);
-
- /*
- * Disable separate mode multiplier used when cloning SDVO to CRT
- * XXX this needs to be adjusted when we really are cloning
- */
- if (INTEL_INFO(dev)->gen >= 4 && !HAS_PCH_SPLIT(dev)) {
- dpll_md = I915_READ(dpll_md_reg);
- I915_WRITE(dpll_md_reg,
- dpll_md & ~DPLL_MD_UDI_MULTIPLIER_MASK);
- }
+ u32 adpa;
adpa = ADPA_HOTPLUG_BITS;
if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
@@ -742,7 +729,7 @@
crt->base.type = INTEL_OUTPUT_ANALOG;
crt->base.cloneable = true;
- if (IS_HASWELL(dev))
+ if (IS_HASWELL(dev) || IS_I830(dev))
crt->base.crtc_mask = (1 << 0);
else
crt->base.crtc_mask = (1 << 0) | (1 << 1) | (1 << 2);
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 682bd37..4154bcd 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -3841,6 +3841,17 @@
}
}
+ if (intel_encoder->type == INTEL_OUTPUT_EDP) {
+ /* Use VBT settings if we have an eDP panel */
+ unsigned int edp_bpc = dev_priv->edp.bpp / 3;
+
+ if (edp_bpc < display_bpc) {
+ DRM_DEBUG_KMS("clamping display bpc (was %d) to eDP (%d)\n", display_bpc, edp_bpc);
+ display_bpc = edp_bpc;
+ }
+ continue;
+ }
+
/*
* HDMI is either 12 or 8, so if the display lets 10bpc sneak
* through, clamp it down. (Note: >12bpc will be caught below.)
@@ -7892,6 +7903,34 @@
void (*hook)(struct drm_device *dev);
};
+/* For systems that don't have a meaningful PCI subdevice/subvendor ID */
+struct intel_dmi_quirk {
+ void (*hook)(struct drm_device *dev);
+ const struct dmi_system_id (*dmi_id_list)[];
+};
+
+static int intel_dmi_reverse_brightness(const struct dmi_system_id *id)
+{
+ DRM_INFO("Backlight polarity reversed on %s\n", id->ident);
+ return 1;
+}
+
+static const struct intel_dmi_quirk intel_dmi_quirks[] = {
+ {
+ .dmi_id_list = &(const struct dmi_system_id[]) {
+ {
+ .callback = intel_dmi_reverse_brightness,
+ .ident = "NCR Corporation",
+ .matches = {DMI_MATCH(DMI_SYS_VENDOR, "NCR Corporation"),
+ DMI_MATCH(DMI_PRODUCT_NAME, ""),
+ },
+ },
+ { } /* terminating entry */
+ },
+ .hook = quirk_invert_brightness,
+ },
+};
+
static struct intel_quirk intel_quirks[] = {
/* HP Mini needs pipe A force quirk (LP: #322104) */
{ 0x27ae, 0x103c, 0x361a, quirk_pipea_force },
@@ -7931,6 +7970,10 @@
q->subsystem_device == PCI_ANY_ID))
q->hook(dev);
}
+ for (i = 0; i < ARRAY_SIZE(intel_dmi_quirks); i++) {
+ if (dmi_check_system(*intel_dmi_quirks[i].dmi_id_list) != 0)
+ intel_dmi_quirks[i].hook(dev);
+ }
}
/* Disable the VGA plane that we never use */
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 1b727a5..368ed8e 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -1797,7 +1797,8 @@
if ((intel_dp->train_set[i] & DP_TRAIN_MAX_SWING_REACHED) == 0)
break;
if (i == intel_dp->lane_count && voltage_tries == 5) {
- if (++loop_tries == 5) {
+ ++loop_tries;
+ if (loop_tries == 5) {
DRM_DEBUG_KMS("too many full retries, give up\n");
break;
}
@@ -1807,11 +1808,15 @@
}
/* Check to see if we've tried the same voltage 5 times */
- if ((intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK) != voltage) {
- voltage = intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK;
- voltage_tries = 0;
- } else
+ if ((intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK) == voltage) {
++voltage_tries;
+ if (voltage_tries == 5) {
+ DRM_DEBUG_KMS("too many voltage retries, give up\n");
+ break;
+ }
+ } else
+ voltage_tries = 0;
+ voltage = intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK;
/* Compute new intel_dp->train_set as requested by target */
intel_get_adjust_train(intel_dp, link_status);
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index e3166df..edba93b 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -777,6 +777,14 @@
DMI_MATCH(DMI_BOARD_NAME, "D525TUD"),
},
},
+ {
+ .callback = intel_no_lvds_dmi_callback,
+ .ident = "Supermicro X7SPA-H",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Supermicro"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "X7SPA-H"),
+ },
+ },
{ } /* terminating entry */
};
diff --git a/drivers/gpu/drm/i915/intel_overlay.c b/drivers/gpu/drm/i915/intel_overlay.c
index 4956259..d7bc817 100644
--- a/drivers/gpu/drm/i915/intel_overlay.c
+++ b/drivers/gpu/drm/i915/intel_overlay.c
@@ -341,9 +341,17 @@
intel_ring_emit(ring, flip_addr);
intel_ring_emit(ring, MI_WAIT_FOR_EVENT | MI_WAIT_FOR_OVERLAY_FLIP);
/* turn overlay off */
- intel_ring_emit(ring, MI_OVERLAY_FLIP | MI_OVERLAY_OFF);
- intel_ring_emit(ring, flip_addr);
- intel_ring_emit(ring, MI_WAIT_FOR_EVENT | MI_WAIT_FOR_OVERLAY_FLIP);
+ if (IS_I830(dev)) {
+ /* Workaround: Don't disable the overlay fully, since otherwise
+ * it dies on the next OVERLAY_ON cmd. */
+ intel_ring_emit(ring, MI_NOOP);
+ intel_ring_emit(ring, MI_NOOP);
+ intel_ring_emit(ring, MI_NOOP);
+ } else {
+ intel_ring_emit(ring, MI_OVERLAY_FLIP | MI_OVERLAY_OFF);
+ intel_ring_emit(ring, flip_addr);
+ intel_ring_emit(ring, MI_WAIT_FOR_EVENT | MI_WAIT_FOR_OVERLAY_FLIP);
+ }
intel_ring_advance(ring);
return intel_overlay_do_wait_request(overlay, intel_overlay_off_tail);
diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c
index e019b23..e2aacd3 100644
--- a/drivers/gpu/drm/i915/intel_panel.c
+++ b/drivers/gpu/drm/i915/intel_panel.c
@@ -435,7 +435,7 @@
props.type = BACKLIGHT_RAW;
props.max_brightness = _intel_panel_get_max_backlight(dev);
if (props.max_brightness == 0) {
- DRM_ERROR("Failed to get maximum backlight value\n");
+ DRM_DEBUG_DRIVER("Failed to get maximum backlight value\n");
return -ENODEV;
}
dev_priv->backlight =
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index 0007a4d..c600fb0 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -139,6 +139,11 @@
/* DDC bus used by this SDVO encoder */
uint8_t ddc_bus;
+
+ /*
+ * the sdvo flag gets lost in round trip: dtd->adjusted_mode->dtd
+ */
+ uint8_t dtd_sdvo_flags;
};
struct intel_sdvo_connector {
@@ -889,6 +894,45 @@
}
#endif
+static bool intel_sdvo_write_infoframe(struct intel_sdvo *intel_sdvo,
+ unsigned if_index, uint8_t tx_rate,
+ uint8_t *data, unsigned length)
+{
+ uint8_t set_buf_index[2] = { if_index, 0 };
+ uint8_t hbuf_size, tmp[8];
+ int i;
+
+ if (!intel_sdvo_set_value(intel_sdvo,
+ SDVO_CMD_SET_HBUF_INDEX,
+ set_buf_index, 2))
+ return false;
+
+ if (!intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_HBUF_INFO,
+ &hbuf_size, 1))
+ return false;
+
+ /* Buffer size is 0 based, hooray! */
+ hbuf_size++;
+
+ DRM_DEBUG_KMS("writing sdvo hbuf: %i, hbuf_size %i, hbuf_size: %i\n",
+ if_index, length, hbuf_size);
+
+ for (i = 0; i < hbuf_size; i += 8) {
+ memset(tmp, 0, 8);
+ if (i < length)
+ memcpy(tmp, data + i, min_t(unsigned, 8, length - i));
+
+ if (!intel_sdvo_set_value(intel_sdvo,
+ SDVO_CMD_SET_HBUF_DATA,
+ tmp, 8))
+ return false;
+ }
+
+ return intel_sdvo_set_value(intel_sdvo,
+ SDVO_CMD_SET_HBUF_TXRATE,
+ &tx_rate, 1);
+}
+
static bool intel_sdvo_set_avi_infoframe(struct intel_sdvo *intel_sdvo)
{
struct dip_infoframe avi_if = {
@@ -896,11 +940,7 @@
.ver = DIP_VERSION_AVI,
.len = DIP_LEN_AVI,
};
- uint8_t tx_rate = SDVO_HBUF_TX_VSYNC;
- uint8_t set_buf_index[2] = { 1, 0 };
uint8_t sdvo_data[4 + sizeof(avi_if.body.avi)];
- uint64_t *data = (uint64_t *)sdvo_data;
- unsigned i;
intel_dip_infoframe_csum(&avi_if);
@@ -910,22 +950,9 @@
sdvo_data[3] = avi_if.checksum;
memcpy(&sdvo_data[4], &avi_if.body, sizeof(avi_if.body.avi));
- if (!intel_sdvo_set_value(intel_sdvo,
- SDVO_CMD_SET_HBUF_INDEX,
- set_buf_index, 2))
- return false;
-
- for (i = 0; i < sizeof(sdvo_data); i += 8) {
- if (!intel_sdvo_set_value(intel_sdvo,
- SDVO_CMD_SET_HBUF_DATA,
- data, 8))
- return false;
- data++;
- }
-
- return intel_sdvo_set_value(intel_sdvo,
- SDVO_CMD_SET_HBUF_TXRATE,
- &tx_rate, 1);
+ return intel_sdvo_write_infoframe(intel_sdvo, SDVO_HBUF_INDEX_AVI_IF,
+ SDVO_HBUF_TX_VSYNC,
+ sdvo_data, sizeof(sdvo_data));
}
static bool intel_sdvo_set_tv_format(struct intel_sdvo *intel_sdvo)
@@ -984,6 +1011,7 @@
return false;
intel_sdvo_get_mode_from_dtd(adjusted_mode, &input_dtd);
+ intel_sdvo->dtd_sdvo_flags = input_dtd.part2.sdvo_flags;
return true;
}
@@ -1092,6 +1120,8 @@
* adjusted_mode.
*/
intel_sdvo_get_dtd_from_mode(&input_dtd, adjusted_mode);
+ if (intel_sdvo->is_tv || intel_sdvo->is_lvds)
+ input_dtd.part2.sdvo_flags = intel_sdvo->dtd_sdvo_flags;
if (!intel_sdvo_set_input_timing(intel_sdvo, &input_dtd))
DRM_INFO("Setting input timings on %s failed\n",
SDVO_NAME(intel_sdvo));
@@ -2277,10 +2307,8 @@
intel_sdvo_connector->output_flag = SDVO_OUTPUT_LVDS1;
}
- /* SDVO LVDS is cloneable because the SDVO encoder does the upscaling,
- * as opposed to native LVDS, where we upscale with the panel-fitter
- * (and hence only the native LVDS resolution could be cloned). */
- intel_sdvo->base.cloneable = true;
+ /* SDVO LVDS is not cloneable because the input mode gets adjusted by the encoder */
+ intel_sdvo->base.cloneable = false;
intel_sdvo_connector_init(intel_sdvo_connector, intel_sdvo);
if (!intel_sdvo_create_enhance_property(intel_sdvo, intel_sdvo_connector))
@@ -2354,6 +2382,18 @@
return true;
}
+static void intel_sdvo_output_cleanup(struct intel_sdvo *intel_sdvo)
+{
+ struct drm_device *dev = intel_sdvo->base.base.dev;
+ struct drm_connector *connector, *tmp;
+
+ list_for_each_entry_safe(connector, tmp,
+ &dev->mode_config.connector_list, head) {
+ if (intel_attached_encoder(connector) == &intel_sdvo->base)
+ intel_sdvo_destroy(connector);
+ }
+}
+
static bool intel_sdvo_tv_create_property(struct intel_sdvo *intel_sdvo,
struct intel_sdvo_connector *intel_sdvo_connector,
int type)
@@ -2677,7 +2717,8 @@
intel_sdvo->caps.output_flags) != true) {
DRM_DEBUG_KMS("SDVO output failed to setup on %s\n",
SDVO_NAME(intel_sdvo));
- goto err;
+ /* Output_setup can leave behind connectors! */
+ goto err_output;
}
/* Only enable the hotplug irq if we need it, to work around noisy
@@ -2690,12 +2731,12 @@
/* Set the input timing to the screen. Assume always input 0. */
if (!intel_sdvo_set_target_input(intel_sdvo))
- goto err;
+ goto err_output;
if (!intel_sdvo_get_input_pixel_clock_range(intel_sdvo,
&intel_sdvo->pixel_clock_min,
&intel_sdvo->pixel_clock_max))
- goto err;
+ goto err_output;
DRM_DEBUG_KMS("%s device VID/DID: %02X:%02X.%02X, "
"clock range %dMHz - %dMHz, "
@@ -2715,6 +2756,9 @@
(SDVO_OUTPUT_TMDS1 | SDVO_OUTPUT_RGB1) ? 'Y' : 'N');
return true;
+err_output:
+ intel_sdvo_output_cleanup(intel_sdvo);
+
err:
drm_encoder_cleanup(&intel_encoder->base);
i2c_del_adapter(&intel_sdvo->ddc);
diff --git a/drivers/gpu/drm/i915/intel_sdvo_regs.h b/drivers/gpu/drm/i915/intel_sdvo_regs.h
index 9d03014..770bdd6 100644
--- a/drivers/gpu/drm/i915/intel_sdvo_regs.h
+++ b/drivers/gpu/drm/i915/intel_sdvo_regs.h
@@ -708,6 +708,8 @@
#define SDVO_CMD_SET_AUDIO_STAT 0x91
#define SDVO_CMD_GET_AUDIO_STAT 0x92
#define SDVO_CMD_SET_HBUF_INDEX 0x93
+ #define SDVO_HBUF_INDEX_ELD 0
+ #define SDVO_HBUF_INDEX_AVI_IF 1
#define SDVO_CMD_GET_HBUF_INDEX 0x94
#define SDVO_CMD_GET_HBUF_INFO 0x95
#define SDVO_CMD_SET_HBUF_AV_SPLIT 0x96
diff --git a/drivers/gpu/drm/nouveau/core/core/gpuobj.c b/drivers/gpu/drm/nouveau/core/core/gpuobj.c
index 1f34549..70586fd 100644
--- a/drivers/gpu/drm/nouveau/core/core/gpuobj.c
+++ b/drivers/gpu/drm/nouveau/core/core/gpuobj.c
@@ -39,6 +39,11 @@
nv_wo32(gpuobj, i, 0x00000000);
}
+ if (gpuobj->node) {
+ nouveau_mm_free(&nv_gpuobj(gpuobj->parent)->heap,
+ &gpuobj->node);
+ }
+
if (gpuobj->heap.block_size)
nouveau_mm_fini(&gpuobj->heap);
diff --git a/drivers/gpu/drm/nouveau/core/core/mm.c b/drivers/gpu/drm/nouveau/core/core/mm.c
index bfddf87..a6d3cd6 100644
--- a/drivers/gpu/drm/nouveau/core/core/mm.c
+++ b/drivers/gpu/drm/nouveau/core/core/mm.c
@@ -218,13 +218,16 @@
node = kzalloc(sizeof(*node), GFP_KERNEL);
if (!node)
return -ENOMEM;
- node->offset = roundup(offset, mm->block_size);
- node->length = rounddown(offset + length, mm->block_size) - node->offset;
+
+ if (length) {
+ node->offset = roundup(offset, mm->block_size);
+ node->length = rounddown(offset + length, mm->block_size);
+ node->length -= node->offset;
+ }
list_add_tail(&node->nl_entry, &mm->nodes);
list_add_tail(&node->fl_entry, &mm->free);
mm->heap_nodes++;
- mm->heap_size += length;
return 0;
}
@@ -236,7 +239,7 @@
int nodes = 0;
list_for_each_entry(node, &mm->nodes, nl_entry) {
- if (nodes++ == mm->heap_nodes)
+ if (WARN_ON(nodes++ == mm->heap_nodes))
return -EBUSY;
}
diff --git a/drivers/gpu/drm/nouveau/core/engine/disp/nv50.c b/drivers/gpu/drm/nouveau/core/engine/disp/nv50.c
index 16a9afb..15b182c 100644
--- a/drivers/gpu/drm/nouveau/core/engine/disp/nv50.c
+++ b/drivers/gpu/drm/nouveau/core/engine/disp/nv50.c
@@ -22,6 +22,8 @@
* Authors: Ben Skeggs
*/
+#include <subdev/bar.h>
+
#include <engine/software.h>
#include <engine/disp.h>
@@ -37,6 +39,7 @@
static void
nv50_disp_intr_vblank(struct nv50_disp_priv *priv, int crtc)
{
+ struct nouveau_bar *bar = nouveau_bar(priv);
struct nouveau_disp *disp = &priv->base;
struct nouveau_software_chan *chan, *temp;
unsigned long flags;
@@ -46,19 +49,25 @@
if (chan->vblank.crtc != crtc)
continue;
- nv_wr32(priv, 0x001704, chan->vblank.channel);
- nv_wr32(priv, 0x001710, 0x80000000 | chan->vblank.ctxdma);
-
- if (nv_device(priv)->chipset == 0x50) {
- nv_wr32(priv, 0x001570, chan->vblank.offset);
- nv_wr32(priv, 0x001574, chan->vblank.value);
- } else {
- if (nv_device(priv)->chipset >= 0xc0) {
- nv_wr32(priv, 0x06000c,
- upper_32_bits(chan->vblank.offset));
- }
- nv_wr32(priv, 0x060010, chan->vblank.offset);
+ if (nv_device(priv)->chipset >= 0xc0) {
+ nv_wr32(priv, 0x001718, 0x80000000 | chan->vblank.channel);
+ bar->flush(bar);
+ nv_wr32(priv, 0x06000c,
+ upper_32_bits(chan->vblank.offset));
+ nv_wr32(priv, 0x060010,
+ lower_32_bits(chan->vblank.offset));
nv_wr32(priv, 0x060014, chan->vblank.value);
+ } else {
+ nv_wr32(priv, 0x001704, chan->vblank.channel);
+ nv_wr32(priv, 0x001710, 0x80000000 | chan->vblank.ctxdma);
+ bar->flush(bar);
+ if (nv_device(priv)->chipset == 0x50) {
+ nv_wr32(priv, 0x001570, chan->vblank.offset);
+ nv_wr32(priv, 0x001574, chan->vblank.value);
+ } else {
+ nv_wr32(priv, 0x060010, chan->vblank.offset);
+ nv_wr32(priv, 0x060014, chan->vblank.value);
+ }
}
list_del(&chan->vblank.head);
diff --git a/drivers/gpu/drm/nouveau/core/engine/graph/ctxnv40.c b/drivers/gpu/drm/nouveau/core/engine/graph/ctxnv40.c
index e45035e..7bbb1e1 100644
--- a/drivers/gpu/drm/nouveau/core/engine/graph/ctxnv40.c
+++ b/drivers/gpu/drm/nouveau/core/engine/graph/ctxnv40.c
@@ -669,21 +669,27 @@
});
}
-void
+int
nv40_grctx_init(struct nouveau_device *device, u32 *size)
{
- u32 ctxprog[256], i;
+ u32 *ctxprog = kmalloc(256 * 4, GFP_KERNEL), i;
struct nouveau_grctx ctx = {
.device = device,
.mode = NOUVEAU_GRCTX_PROG,
.data = ctxprog,
- .ctxprog_max = ARRAY_SIZE(ctxprog)
+ .ctxprog_max = 256,
};
+ if (!ctxprog)
+ return -ENOMEM;
+
nv40_grctx_generate(&ctx);
nv_wr32(device, 0x400324, 0);
for (i = 0; i < ctx.ctxprog_len; i++)
nv_wr32(device, 0x400328, ctxprog[i]);
*size = ctx.ctxvals_pos * 4;
+
+ kfree(ctxprog);
+ return 0;
}
diff --git a/drivers/gpu/drm/nouveau/core/engine/graph/nv40.c b/drivers/gpu/drm/nouveau/core/engine/graph/nv40.c
index 8d00210..cc6574e 100644
--- a/drivers/gpu/drm/nouveau/core/engine/graph/nv40.c
+++ b/drivers/gpu/drm/nouveau/core/engine/graph/nv40.c
@@ -156,8 +156,8 @@
static int
nv40_graph_context_fini(struct nouveau_object *object, bool suspend)
{
- struct nv04_graph_priv *priv = (void *)object->engine;
- struct nv04_graph_chan *chan = (void *)object;
+ struct nv40_graph_priv *priv = (void *)object->engine;
+ struct nv40_graph_chan *chan = (void *)object;
u32 inst = 0x01000000 | nv_gpuobj(chan)->addr >> 4;
int ret = 0;
@@ -346,7 +346,9 @@
return ret;
/* generate and upload context program */
- nv40_grctx_init(nv_device(priv), &priv->size);
+ ret = nv40_grctx_init(nv_device(priv), &priv->size);
+ if (ret)
+ return ret;
/* No context present currently */
nv_wr32(priv, NV40_PGRAPH_CTXCTL_CUR, 0x00000000);
diff --git a/drivers/gpu/drm/nouveau/core/engine/graph/nv40.h b/drivers/gpu/drm/nouveau/core/engine/graph/nv40.h
index d2ac975..7da35a4 100644
--- a/drivers/gpu/drm/nouveau/core/engine/graph/nv40.h
+++ b/drivers/gpu/drm/nouveau/core/engine/graph/nv40.h
@@ -15,7 +15,7 @@
return !(0x0baf & (1 << (device->chipset & 0x0f)));
}
-void nv40_grctx_init(struct nouveau_device *, u32 *size);
+int nv40_grctx_init(struct nouveau_device *, u32 *size);
void nv40_grctx_fill(struct nouveau_device *, struct nouveau_gpuobj *);
#endif
diff --git a/drivers/gpu/drm/nouveau/core/engine/mpeg/nv40.c b/drivers/gpu/drm/nouveau/core/engine/mpeg/nv40.c
index 1241857..f7c581a 100644
--- a/drivers/gpu/drm/nouveau/core/engine/mpeg/nv40.c
+++ b/drivers/gpu/drm/nouveau/core/engine/mpeg/nv40.c
@@ -38,7 +38,7 @@
};
struct nv40_mpeg_chan {
- struct nouveau_mpeg base;
+ struct nouveau_mpeg_chan base;
};
/*******************************************************************************
diff --git a/drivers/gpu/drm/nouveau/core/include/core/mm.h b/drivers/gpu/drm/nouveau/core/include/core/mm.h
index 9ee9bf4..975137b 100644
--- a/drivers/gpu/drm/nouveau/core/include/core/mm.h
+++ b/drivers/gpu/drm/nouveau/core/include/core/mm.h
@@ -19,7 +19,6 @@
u32 block_size;
int heap_nodes;
- u32 heap_size;
};
int nouveau_mm_init(struct nouveau_mm *, u32 offset, u32 length, u32 block);
diff --git a/drivers/gpu/drm/nouveau/core/include/core/object.h b/drivers/gpu/drm/nouveau/core/include/core/object.h
index 818feab..486f1a9 100644
--- a/drivers/gpu/drm/nouveau/core/include/core/object.h
+++ b/drivers/gpu/drm/nouveau/core/include/core/object.h
@@ -175,14 +175,18 @@
return temp;
}
-static inline bool
-nv_strncmp(void *obj, u32 addr, u32 len, const char *str)
+static inline int
+nv_memcmp(void *obj, u32 addr, const char *str, u32 len)
{
+ unsigned char c1, c2;
+
while (len--) {
- if (nv_ro08(obj, addr++) != *(str++))
- return false;
+ c1 = nv_ro08(obj, addr++);
+ c2 = *(str++);
+ if (c1 != c2)
+ return c1 - c2;
}
- return true;
+ return 0;
}
#endif
diff --git a/drivers/gpu/drm/nouveau/core/include/subdev/clock.h b/drivers/gpu/drm/nouveau/core/include/subdev/clock.h
index 39e73b9..41b7a6a 100644
--- a/drivers/gpu/drm/nouveau/core/include/subdev/clock.h
+++ b/drivers/gpu/drm/nouveau/core/include/subdev/clock.h
@@ -54,6 +54,7 @@
int clk, struct nouveau_pll_vals *);
int nv04_clock_pll_prog(struct nouveau_clock *, u32 reg1,
struct nouveau_pll_vals *);
-
+int nva3_clock_pll_calc(struct nouveau_clock *, struct nvbios_pll *,
+ int clk, struct nouveau_pll_vals *);
#endif
diff --git a/drivers/gpu/drm/nouveau/core/subdev/bios/base.c b/drivers/gpu/drm/nouveau/core/subdev/bios/base.c
index dcb5c2b..70ca7d5a 100644
--- a/drivers/gpu/drm/nouveau/core/subdev/bios/base.c
+++ b/drivers/gpu/drm/nouveau/core/subdev/bios/base.c
@@ -72,7 +72,7 @@
}
data = of_get_property(dn, "NVDA,BMP", &size);
- if (data) {
+ if (data && size) {
bios->size = size;
bios->data = kmalloc(bios->size, GFP_KERNEL);
if (bios->data)
@@ -104,6 +104,9 @@
goto out;
bios->size = nv_rd08(bios, 0x700002) * 512;
+ if (!bios->size)
+ goto out;
+
bios->data = kmalloc(bios->size, GFP_KERNEL);
if (bios->data) {
for (i = 0; i < bios->size; i++)
@@ -155,6 +158,9 @@
/* read entire bios image to system memory */
bios->size = nv_rd08(bios, 0x300002) * 512;
+ if (!bios->size)
+ goto out;
+
bios->data = kmalloc(bios->size, GFP_KERNEL);
if (bios->data) {
for (i = 0; i < bios->size; i++)
@@ -186,14 +192,22 @@
{
struct pci_dev *pdev = nv_device(bios)->pdev;
int ret, cnt, i;
- u8 data[3];
- if (!nouveau_acpi_rom_supported(pdev))
+ if (!nouveau_acpi_rom_supported(pdev)) {
+ bios->data = NULL;
return;
+ }
bios->size = 0;
- if (nouveau_acpi_get_bios_chunk(data, 0, 3) == 3)
- bios->size = data[2] * 512;
+ bios->data = kmalloc(4096, GFP_KERNEL);
+ if (bios->data) {
+ if (nouveau_acpi_get_bios_chunk(bios->data, 0, 4096) == 4096)
+ bios->size = bios->data[2] * 512;
+ kfree(bios->data);
+ }
+
+ if (!bios->size)
+ return;
bios->data = kmalloc(bios->size, GFP_KERNEL);
for (i = 0; bios->data && i < bios->size; i += cnt) {
@@ -229,12 +243,14 @@
static int
nouveau_bios_score(struct nouveau_bios *bios, const bool writeable)
{
- if (!bios->data || bios->data[0] != 0x55 || bios->data[1] != 0xAA) {
+ if (bios->size < 3 || !bios->data || bios->data[0] != 0x55 ||
+ bios->data[1] != 0xAA) {
nv_info(bios, "... signature not found\n");
return 0;
}
- if (nvbios_checksum(bios->data, bios->data[2] * 512)) {
+ if (nvbios_checksum(bios->data,
+ min_t(u32, bios->data[2] * 512, bios->size))) {
nv_info(bios, "... checksum invalid\n");
/* if a ro image is somewhat bad, it's probably all rubbish */
return writeable ? 2 : 1;
diff --git a/drivers/gpu/drm/nouveau/core/subdev/bios/dcb.c b/drivers/gpu/drm/nouveau/core/subdev/bios/dcb.c
index 7d75038..c511971 100644
--- a/drivers/gpu/drm/nouveau/core/subdev/bios/dcb.c
+++ b/drivers/gpu/drm/nouveau/core/subdev/bios/dcb.c
@@ -64,7 +64,7 @@
}
} else
if (*ver >= 0x15) {
- if (!nv_strncmp(bios, dcb - 7, 7, "DEV_REC")) {
+ if (!nv_memcmp(bios, dcb - 7, "DEV_REC", 7)) {
u16 i2c = nv_ro16(bios, dcb + 2);
*hdr = 4;
*cnt = (i2c - dcb) / 10;
diff --git a/drivers/gpu/drm/nouveau/core/subdev/bios/pll.c b/drivers/gpu/drm/nouveau/core/subdev/bios/pll.c
index 5e5f4cd..f835501 100644
--- a/drivers/gpu/drm/nouveau/core/subdev/bios/pll.c
+++ b/drivers/gpu/drm/nouveau/core/subdev/bios/pll.c
@@ -157,11 +157,10 @@
while (map->reg) {
if (map->reg == reg && *ver >= 0x20) {
u16 addr = (data += hdr);
+ *type = map->type;
while (cnt--) {
- if (nv_ro32(bios, data) == map->reg) {
- *type = map->type;
+ if (nv_ro32(bios, data) == map->reg)
return data;
- }
data += *len;
}
return addr;
@@ -200,11 +199,10 @@
while (map->reg) {
if (map->type == type && *ver >= 0x20) {
u16 addr = (data += hdr);
+ *reg = map->reg;
while (cnt--) {
- if (nv_ro32(bios, data) == map->reg) {
- *reg = map->reg;
+ if (nv_ro32(bios, data) == map->reg)
return data;
- }
data += *len;
}
return addr;
diff --git a/drivers/gpu/drm/nouveau/core/subdev/clock/nva3.c b/drivers/gpu/drm/nouveau/core/subdev/clock/nva3.c
index cc8d7d1..9068c98 100644
--- a/drivers/gpu/drm/nouveau/core/subdev/clock/nva3.c
+++ b/drivers/gpu/drm/nouveau/core/subdev/clock/nva3.c
@@ -66,6 +66,24 @@
return ret;
}
+int
+nva3_clock_pll_calc(struct nouveau_clock *clock, struct nvbios_pll *info,
+ int clk, struct nouveau_pll_vals *pv)
+{
+ int ret, N, M, P;
+
+ ret = nva3_pll_calc(clock, info, clk, &N, NULL, &M, &P);
+
+ if (ret > 0) {
+ pv->refclk = info->refclk;
+ pv->N1 = N;
+ pv->M1 = M;
+ pv->log2P = P;
+ }
+ return ret;
+}
+
+
static int
nva3_clock_ctor(struct nouveau_object *parent, struct nouveau_object *engine,
struct nouveau_oclass *oclass, void *data, u32 size,
@@ -80,6 +98,7 @@
return ret;
priv->base.pll_set = nva3_clock_pll_set;
+ priv->base.pll_calc = nva3_clock_pll_calc;
return 0;
}
diff --git a/drivers/gpu/drm/nouveau/core/subdev/clock/nvc0.c b/drivers/gpu/drm/nouveau/core/subdev/clock/nvc0.c
index 5ccce0b..f6962c9 100644
--- a/drivers/gpu/drm/nouveau/core/subdev/clock/nvc0.c
+++ b/drivers/gpu/drm/nouveau/core/subdev/clock/nvc0.c
@@ -79,6 +79,7 @@
return ret;
priv->base.pll_set = nvc0_clock_pll_set;
+ priv->base.pll_calc = nva3_clock_pll_calc;
return 0;
}
diff --git a/drivers/gpu/drm/nouveau/core/subdev/fb/nv50.c b/drivers/gpu/drm/nouveau/core/subdev/fb/nv50.c
index 42d7539..5f570806 100644
--- a/drivers/gpu/drm/nouveau/core/subdev/fb/nv50.c
+++ b/drivers/gpu/drm/nouveau/core/subdev/fb/nv50.c
@@ -219,13 +219,11 @@
((priv->base.ram.size & 0x000000ff) << 32);
tags = nv_rd32(priv, 0x100320);
- if (tags) {
- ret = nouveau_mm_init(&priv->base.tags, 0, tags, 1);
- if (ret)
- return ret;
+ ret = nouveau_mm_init(&priv->base.tags, 0, tags, 1);
+ if (ret)
+ return ret;
- nv_debug(priv, "%d compression tags\n", tags);
- }
+ nv_debug(priv, "%d compression tags\n", tags);
size = (priv->base.ram.size >> 12) - rsvd_head - rsvd_tail;
switch (device->chipset) {
@@ -237,6 +235,7 @@
return ret;
priv->base.ram.stolen = (u64)nv_rd32(priv, 0x100e10) << 12;
+ priv->base.ram.type = NV_MEM_TYPE_STOLEN;
break;
default:
ret = nouveau_mm_init(&priv->base.vram, rsvd_head, size,
diff --git a/drivers/gpu/drm/nouveau/core/subdev/i2c/base.c b/drivers/gpu/drm/nouveau/core/subdev/i2c/base.c
index 3d2c883..dbfc2abf 100644
--- a/drivers/gpu/drm/nouveau/core/subdev/i2c/base.c
+++ b/drivers/gpu/drm/nouveau/core/subdev/i2c/base.c
@@ -292,7 +292,7 @@
case DCB_I2C_NVIO_BIT:
port->drive = info.drive & 0x0f;
if (device->card_type < NV_D0) {
- if (info.drive >= ARRAY_SIZE(nv50_i2c_port))
+ if (port->drive >= ARRAY_SIZE(nv50_i2c_port))
break;
port->drive = nv50_i2c_port[port->drive];
port->sense = port->drive;
diff --git a/drivers/gpu/drm/nouveau/core/subdev/vm/nv41.c b/drivers/gpu/drm/nouveau/core/subdev/vm/nv41.c
index 0203e1e..9474cfc 100644
--- a/drivers/gpu/drm/nouveau/core/subdev/vm/nv41.c
+++ b/drivers/gpu/drm/nouveau/core/subdev/vm/nv41.c
@@ -67,7 +67,7 @@
static void
nv41_vm_flush(struct nouveau_vm *vm)
{
- struct nv04_vm_priv *priv = (void *)vm->vmm;
+ struct nv04_vmmgr_priv *priv = (void *)vm->vmm;
mutex_lock(&nv_subdev(priv)->mutex);
nv_wr32(priv, 0x100810, 0x00000022);
@@ -92,7 +92,8 @@
struct nv04_vmmgr_priv *priv;
int ret;
- if (!nouveau_boolopt(device->cfgopt, "NvPCIE", true)) {
+ if (pci_find_capability(device->pdev, PCI_CAP_ID_AGP) ||
+ !nouveau_boolopt(device->cfgopt, "NvPCIE", true)) {
return nouveau_object_ctor(parent, engine, &nv04_vmmgr_oclass,
data, size, pobject);
}
diff --git a/drivers/gpu/drm/nouveau/core/subdev/vm/nv44.c b/drivers/gpu/drm/nouveau/core/subdev/vm/nv44.c
index 0ac18d0..aa81314 100644
--- a/drivers/gpu/drm/nouveau/core/subdev/vm/nv44.c
+++ b/drivers/gpu/drm/nouveau/core/subdev/vm/nv44.c
@@ -163,7 +163,8 @@
struct nv04_vmmgr_priv *priv;
int ret;
- if (!nouveau_boolopt(device->cfgopt, "NvPCIE", true)) {
+ if (pci_find_capability(device->pdev, PCI_CAP_ID_AGP) ||
+ !nouveau_boolopt(device->cfgopt, "NvPCIE", true)) {
return nouveau_object_ctor(parent, engine, &nv04_vmmgr_oclass,
data, size, pobject);
}
diff --git a/drivers/gpu/drm/nouveau/nouveau_abi16.c b/drivers/gpu/drm/nouveau/nouveau_abi16.c
index cc79c79..cbf1fc6 100644
--- a/drivers/gpu/drm/nouveau/nouveau_abi16.c
+++ b/drivers/gpu/drm/nouveau/nouveau_abi16.c
@@ -241,6 +241,10 @@
if (unlikely(!abi16))
return -ENOMEM;
+
+ if (!drm->channel)
+ return nouveau_abi16_put(abi16, -ENODEV);
+
client = nv_client(abi16->client);
if (init->fb_ctxdma_handle == ~0 || init->tt_ctxdma_handle == ~0)
diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.c b/drivers/gpu/drm/nouveau/nouveau_connector.c
index 9a6e2cb..d3595b2 100644
--- a/drivers/gpu/drm/nouveau/nouveau_connector.c
+++ b/drivers/gpu/drm/nouveau/nouveau_connector.c
@@ -355,7 +355,7 @@
* valid - it's not (rh#613284)
*/
if (nv_encoder->dcb->lvdsconf.use_acpi_for_edid) {
- if (!(nv_connector->edid = nouveau_acpi_edid(dev, connector))) {
+ if ((nv_connector->edid = nouveau_acpi_edid(dev, connector))) {
status = connector_status_connected;
goto out;
}
diff --git a/drivers/gpu/drm/nouveau/nouveau_display.c b/drivers/gpu/drm/nouveau/nouveau_display.c
index 8f98e5a..86124b1 100644
--- a/drivers/gpu/drm/nouveau/nouveau_display.c
+++ b/drivers/gpu/drm/nouveau/nouveau_display.c
@@ -290,6 +290,7 @@
struct nouveau_drm *drm = nouveau_drm(dev);
struct nouveau_disp *pdisp = nouveau_disp(drm->device);
struct nouveau_display *disp;
+ u32 pclass = dev->pdev->class >> 8;
int ret, gen;
disp = drm->display = kzalloc(sizeof(*disp), GFP_KERNEL);
@@ -360,23 +361,27 @@
drm_kms_helper_poll_init(dev);
drm_kms_helper_poll_disable(dev);
- if (nv_device(drm->device)->card_type < NV_50)
- ret = nv04_display_create(dev);
- else
- if (nv_device(drm->device)->card_type < NV_D0)
- ret = nv50_display_create(dev);
- else
- ret = nvd0_display_create(dev);
- if (ret)
- goto disp_create_err;
-
- if (dev->mode_config.num_crtc) {
- ret = drm_vblank_init(dev, dev->mode_config.num_crtc);
+ if (nouveau_modeset == 1 ||
+ (nouveau_modeset < 0 && pclass == PCI_CLASS_DISPLAY_VGA)) {
+ if (nv_device(drm->device)->card_type < NV_50)
+ ret = nv04_display_create(dev);
+ else
+ if (nv_device(drm->device)->card_type < NV_D0)
+ ret = nv50_display_create(dev);
+ else
+ ret = nvd0_display_create(dev);
if (ret)
- goto vblank_err;
+ goto disp_create_err;
+
+ if (dev->mode_config.num_crtc) {
+ ret = drm_vblank_init(dev, dev->mode_config.num_crtc);
+ if (ret)
+ goto vblank_err;
+ }
+
+ nouveau_backlight_init(dev);
}
- nouveau_backlight_init(dev);
return 0;
vblank_err:
@@ -395,7 +400,8 @@
nouveau_backlight_exit(dev);
drm_vblank_cleanup(dev);
- disp->dtor(dev);
+ if (disp->dtor)
+ disp->dtor(dev);
drm_kms_helper_poll_fini(dev);
drm_mode_config_cleanup(dev);
@@ -530,9 +536,11 @@
if (ret)
goto fail;
- ret = ttm_bo_reserve(&old_bo->bo, false, false, false, 0);
- if (ret)
- goto fail_unreserve;
+ if (likely(old_bo != new_bo)) {
+ ret = ttm_bo_reserve(&old_bo->bo, false, false, false, 0);
+ if (ret)
+ goto fail_unreserve;
+ }
return 0;
@@ -551,8 +559,10 @@
nouveau_bo_fence(new_bo, fence);
ttm_bo_unreserve(&new_bo->bo);
- nouveau_bo_fence(old_bo, fence);
- ttm_bo_unreserve(&old_bo->bo);
+ if (likely(old_bo != new_bo)) {
+ nouveau_bo_fence(old_bo, fence);
+ ttm_bo_unreserve(&old_bo->bo);
+ }
nouveau_bo_unpin(old_bo);
}
diff --git a/drivers/gpu/drm/nouveau/nouveau_drm.c b/drivers/gpu/drm/nouveau/nouveau_drm.c
index ccae8c26..8503b2e 100644
--- a/drivers/gpu/drm/nouveau/nouveau_drm.c
+++ b/drivers/gpu/drm/nouveau/nouveau_drm.c
@@ -63,8 +63,9 @@
static int nouveau_noaccel = 0;
module_param_named(noaccel, nouveau_noaccel, int, 0400);
-MODULE_PARM_DESC(modeset, "enable driver");
-static int nouveau_modeset = -1;
+MODULE_PARM_DESC(modeset, "enable driver (default: auto, "
+ "0 = disabled, 1 = enabled, 2 = headless)");
+int nouveau_modeset = -1;
module_param_named(modeset, nouveau_modeset, int, 0400);
static struct drm_driver driver;
@@ -128,7 +129,8 @@
/* initialise synchronisation routines */
if (device->card_type < NV_10) ret = nv04_fence_create(drm);
- else if (device->chipset < 0x84) ret = nv10_fence_create(drm);
+ else if (device->card_type < NV_50) ret = nv10_fence_create(drm);
+ else if (device->chipset < 0x84) ret = nv50_fence_create(drm);
else if (device->card_type < NV_C0) ret = nv84_fence_create(drm);
else ret = nvc0_fence_create(drm);
if (ret) {
@@ -363,7 +365,8 @@
nouveau_pm_fini(dev);
- nouveau_display_fini(dev);
+ if (dev->mode_config.num_crtc)
+ nouveau_display_fini(dev);
nouveau_display_destroy(dev);
nouveau_irq_fini(dev);
@@ -403,13 +406,15 @@
pm_state.event == PM_EVENT_PRETHAW)
return 0;
- NV_INFO(drm, "suspending fbcon...\n");
- nouveau_fbcon_set_suspend(dev, 1);
+ if (dev->mode_config.num_crtc) {
+ NV_INFO(drm, "suspending fbcon...\n");
+ nouveau_fbcon_set_suspend(dev, 1);
- NV_INFO(drm, "suspending display...\n");
- ret = nouveau_display_suspend(dev);
- if (ret)
- return ret;
+ NV_INFO(drm, "suspending display...\n");
+ ret = nouveau_display_suspend(dev);
+ if (ret)
+ return ret;
+ }
NV_INFO(drm, "evicting buffers...\n");
ttm_bo_evict_mm(&drm->ttm.bdev, TTM_PL_VRAM);
@@ -445,8 +450,10 @@
nouveau_client_init(&cli->base);
}
- NV_INFO(drm, "resuming display...\n");
- nouveau_display_resume(dev);
+ if (dev->mode_config.num_crtc) {
+ NV_INFO(drm, "resuming display...\n");
+ nouveau_display_resume(dev);
+ }
return ret;
}
@@ -486,8 +493,10 @@
nouveau_irq_postinstall(dev);
nouveau_pm_resume(dev);
- NV_INFO(drm, "resuming display...\n");
- nouveau_display_resume(dev);
+ if (dev->mode_config.num_crtc) {
+ NV_INFO(drm, "resuming display...\n");
+ nouveau_display_resume(dev);
+ }
return 0;
}
@@ -662,9 +671,7 @@
#ifdef CONFIG_VGA_CONSOLE
if (vgacon_text_force())
nouveau_modeset = 0;
- else
#endif
- nouveau_modeset = 1;
}
if (!nouveau_modeset)
diff --git a/drivers/gpu/drm/nouveau/nouveau_drm.h b/drivers/gpu/drm/nouveau/nouveau_drm.h
index 8194712..a101699 100644
--- a/drivers/gpu/drm/nouveau/nouveau_drm.h
+++ b/drivers/gpu/drm/nouveau/nouveau_drm.h
@@ -141,4 +141,6 @@
nv_info((cli), fmt, ##args); \
} while (0)
+extern int nouveau_modeset;
+
#endif
diff --git a/drivers/gpu/drm/nouveau/nouveau_irq.c b/drivers/gpu/drm/nouveau/nouveau_irq.c
index 9ca8afd..1d8cb50 100644
--- a/drivers/gpu/drm/nouveau/nouveau_irq.c
+++ b/drivers/gpu/drm/nouveau/nouveau_irq.c
@@ -61,13 +61,15 @@
nv_subdev(pmc)->intr(nv_subdev(pmc));
- if (device->card_type >= NV_D0) {
- if (nv_rd32(device, 0x000100) & 0x04000000)
- nvd0_display_intr(dev);
- } else
- if (device->card_type >= NV_50) {
- if (nv_rd32(device, 0x000100) & 0x04000000)
- nv50_display_intr(dev);
+ if (dev->mode_config.num_crtc) {
+ if (device->card_type >= NV_D0) {
+ if (nv_rd32(device, 0x000100) & 0x04000000)
+ nvd0_display_intr(dev);
+ } else
+ if (device->card_type >= NV_50) {
+ if (nv_rd32(device, 0x000100) & 0x04000000)
+ nv50_display_intr(dev);
+ }
}
return IRQ_HANDLED;
diff --git a/drivers/gpu/drm/nouveau/nv04_dac.c b/drivers/gpu/drm/nouveau/nv04_dac.c
index 347a3bd..64f7020 100644
--- a/drivers/gpu/drm/nouveau/nv04_dac.c
+++ b/drivers/gpu/drm/nouveau/nv04_dac.c
@@ -220,7 +220,7 @@
NVWriteVgaCrtc(dev, 0, NV_CIO_CR_MODE_INDEX, saved_cr_mode);
if (blue == 0x18) {
- NV_INFO(drm, "Load detected on head A\n");
+ NV_DEBUG(drm, "Load detected on head A\n");
return connector_status_connected;
}
@@ -338,8 +338,8 @@
if (nv17_dac_sample_load(encoder) &
NV_PRAMDAC_TEST_CONTROL_SENSEB_ALLHI) {
- NV_INFO(drm, "Load detected on output %c\n",
- '@' + ffs(dcb->or));
+ NV_DEBUG(drm, "Load detected on output %c\n",
+ '@' + ffs(dcb->or));
return connector_status_connected;
} else {
return connector_status_disconnected;
@@ -413,9 +413,9 @@
helper->dpms(encoder, DRM_MODE_DPMS_ON);
- NV_INFO(drm, "Output %s is running on CRTC %d using output %c\n",
- drm_get_connector_name(&nouveau_encoder_connector_get(nv_encoder)->base),
- nv_crtc->index, '@' + ffs(nv_encoder->dcb->or));
+ NV_DEBUG(drm, "Output %s is running on CRTC %d using output %c\n",
+ drm_get_connector_name(&nouveau_encoder_connector_get(nv_encoder)->base),
+ nv_crtc->index, '@' + ffs(nv_encoder->dcb->or));
}
void nv04_dac_update_dacclk(struct drm_encoder *encoder, bool enable)
@@ -461,8 +461,8 @@
return;
nv_encoder->last_dpms = mode;
- NV_INFO(drm, "Setting dpms mode %d on vga encoder (output %d)\n",
- mode, nv_encoder->dcb->index);
+ NV_DEBUG(drm, "Setting dpms mode %d on vga encoder (output %d)\n",
+ mode, nv_encoder->dcb->index);
nv04_dac_update_dacclk(encoder, mode == DRM_MODE_DPMS_ON);
}
diff --git a/drivers/gpu/drm/nouveau/nv04_dfp.c b/drivers/gpu/drm/nouveau/nv04_dfp.c
index da55d76..184cdf8 100644
--- a/drivers/gpu/drm/nouveau/nv04_dfp.c
+++ b/drivers/gpu/drm/nouveau/nv04_dfp.c
@@ -476,9 +476,9 @@
helper->dpms(encoder, DRM_MODE_DPMS_ON);
- NV_INFO(drm, "Output %s is running on CRTC %d using output %c\n",
- drm_get_connector_name(&nouveau_encoder_connector_get(nv_encoder)->base),
- nv_crtc->index, '@' + ffs(nv_encoder->dcb->or));
+ NV_DEBUG(drm, "Output %s is running on CRTC %d using output %c\n",
+ drm_get_connector_name(&nouveau_encoder_connector_get(nv_encoder)->base),
+ nv_crtc->index, '@' + ffs(nv_encoder->dcb->or));
}
static void nv04_dfp_update_backlight(struct drm_encoder *encoder, int mode)
@@ -520,8 +520,8 @@
return;
nv_encoder->last_dpms = mode;
- NV_INFO(drm, "Setting dpms mode %d on lvds encoder (output %d)\n",
- mode, nv_encoder->dcb->index);
+ NV_DEBUG(drm, "Setting dpms mode %d on lvds encoder (output %d)\n",
+ mode, nv_encoder->dcb->index);
if (was_powersaving && is_powersaving_dpms(mode))
return;
@@ -565,8 +565,8 @@
return;
nv_encoder->last_dpms = mode;
- NV_INFO(drm, "Setting dpms mode %d on tmds encoder (output %d)\n",
- mode, nv_encoder->dcb->index);
+ NV_DEBUG(drm, "Setting dpms mode %d on tmds encoder (output %d)\n",
+ mode, nv_encoder->dcb->index);
nv04_dfp_update_backlight(encoder, mode);
nv04_dfp_update_fp_control(encoder, mode);
diff --git a/drivers/gpu/drm/nouveau/nv04_tv.c b/drivers/gpu/drm/nouveau/nv04_tv.c
index 099fbed..62e826a 100644
--- a/drivers/gpu/drm/nouveau/nv04_tv.c
+++ b/drivers/gpu/drm/nouveau/nv04_tv.c
@@ -75,8 +75,8 @@
struct nv04_mode_state *state = &nv04_display(dev)->mode_reg;
uint8_t crtc1A;
- NV_INFO(drm, "Setting dpms mode %d on TV encoder (output %d)\n",
- mode, nv_encoder->dcb->index);
+ NV_DEBUG(drm, "Setting dpms mode %d on TV encoder (output %d)\n",
+ mode, nv_encoder->dcb->index);
state->pllsel &= ~(PLLSEL_TV_CRTC1_MASK | PLLSEL_TV_CRTC2_MASK);
@@ -167,9 +167,8 @@
helper->dpms(encoder, DRM_MODE_DPMS_ON);
- NV_INFO(drm, "Output %s is running on CRTC %d using output %c\n",
- drm_get_connector_name(&nouveau_encoder_connector_get(nv_encoder)->base), nv_crtc->index,
- '@' + ffs(nv_encoder->dcb->or));
+ NV_DEBUG(drm, "Output %s is running on CRTC %d using output %c\n",
+ drm_get_connector_name(&nouveau_encoder_connector_get(nv_encoder)->base), nv_crtc->index, '@' + ffs(nv_encoder->dcb->or));
}
static void nv04_tv_destroy(struct drm_encoder *encoder)
diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c
index 2e566e12..3bce029 100644
--- a/drivers/gpu/drm/radeon/atombios_crtc.c
+++ b/drivers/gpu/drm/radeon/atombios_crtc.c
@@ -1696,35 +1696,43 @@
return ATOM_PPLL2;
DRM_ERROR("unable to allocate a PPLL\n");
return ATOM_PPLL_INVALID;
- } else {
- if (ASIC_IS_AVIVO(rdev)) {
- /* in DP mode, the DP ref clock can come from either PPLL
- * depending on the asic:
- * DCE3: PPLL1 or PPLL2
- */
- if (ENCODER_MODE_IS_DP(atombios_get_encoder_mode(radeon_crtc->encoder))) {
- /* use the same PPLL for all DP monitors */
- pll = radeon_get_shared_dp_ppll(crtc);
- if (pll != ATOM_PPLL_INVALID)
- return pll;
- } else {
- /* use the same PPLL for all monitors with the same clock */
- pll = radeon_get_shared_nondp_ppll(crtc);
- if (pll != ATOM_PPLL_INVALID)
- return pll;
- }
- /* all other cases */
- pll_in_use = radeon_get_pll_use_mask(crtc);
+ } else if (ASIC_IS_AVIVO(rdev)) {
+ /* in DP mode, the DP ref clock can come from either PPLL
+ * depending on the asic:
+ * DCE3: PPLL1 or PPLL2
+ */
+ if (ENCODER_MODE_IS_DP(atombios_get_encoder_mode(radeon_crtc->encoder))) {
+ /* use the same PPLL for all DP monitors */
+ pll = radeon_get_shared_dp_ppll(crtc);
+ if (pll != ATOM_PPLL_INVALID)
+ return pll;
+ } else {
+ /* use the same PPLL for all monitors with the same clock */
+ pll = radeon_get_shared_nondp_ppll(crtc);
+ if (pll != ATOM_PPLL_INVALID)
+ return pll;
+ }
+ /* all other cases */
+ pll_in_use = radeon_get_pll_use_mask(crtc);
+ /* the order shouldn't matter here, but we probably
+ * need this until we have atomic modeset
+ */
+ if (rdev->flags & RADEON_IS_IGP) {
if (!(pll_in_use & (1 << ATOM_PPLL1)))
return ATOM_PPLL1;
if (!(pll_in_use & (1 << ATOM_PPLL2)))
return ATOM_PPLL2;
- DRM_ERROR("unable to allocate a PPLL\n");
- return ATOM_PPLL_INVALID;
} else {
- /* on pre-R5xx asics, the crtc to pll mapping is hardcoded */
- return radeon_crtc->crtc_id;
+ if (!(pll_in_use & (1 << ATOM_PPLL2)))
+ return ATOM_PPLL2;
+ if (!(pll_in_use & (1 << ATOM_PPLL1)))
+ return ATOM_PPLL1;
}
+ DRM_ERROR("unable to allocate a PPLL\n");
+ return ATOM_PPLL_INVALID;
+ } else {
+ /* on pre-R5xx asics, the crtc to pll mapping is hardcoded */
+ return radeon_crtc->crtc_id;
}
}
diff --git a/drivers/gpu/drm/radeon/atombios_encoders.c b/drivers/gpu/drm/radeon/atombios_encoders.c
index 49cbb37..010bae1 100644
--- a/drivers/gpu/drm/radeon/atombios_encoders.c
+++ b/drivers/gpu/drm/radeon/atombios_encoders.c
@@ -184,6 +184,7 @@
struct radeon_backlight_privdata *pdata;
struct radeon_encoder_atom_dig *dig;
u8 backlight_level;
+ char bl_name[16];
if (!radeon_encoder->enc_priv)
return;
@@ -203,7 +204,9 @@
memset(&props, 0, sizeof(props));
props.max_brightness = RADEON_MAX_BL_LEVEL;
props.type = BACKLIGHT_RAW;
- bd = backlight_device_register("radeon_bl", &drm_connector->kdev,
+ snprintf(bl_name, sizeof(bl_name),
+ "radeon_bl%d", dev->primary->index);
+ bd = backlight_device_register(bl_name, &drm_connector->kdev,
pdata, &radeon_atom_backlight_ops, &props);
if (IS_ERR(bd)) {
DRM_ERROR("Backlight registration failed\n");
@@ -1622,7 +1625,7 @@
atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_SETUP, 0, 0);
atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE, 0, 0);
/* some early dce3.2 boards have a bug in their transmitter control table */
- if ((rdev->family != CHIP_RV710) || (rdev->family != CHIP_RV730))
+ if ((rdev->family != CHIP_RV710) && (rdev->family != CHIP_RV730))
atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE_OUTPUT, 0, 0);
}
if (ENCODER_MODE_IS_DP(atombios_get_encoder_mode(encoder)) && connector) {
diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c
index 14313ad..219942c 100644
--- a/drivers/gpu/drm/radeon/evergreen.c
+++ b/drivers/gpu/drm/radeon/evergreen.c
@@ -1330,6 +1330,8 @@
break;
udelay(1);
}
+ } else {
+ save->crtc_enabled[i] = false;
}
}
@@ -1372,7 +1374,7 @@
WREG32(BIF_FB_EN, FB_READ_EN | FB_WRITE_EN);
for (i = 0; i < rdev->num_crtc; i++) {
- if (save->crtc_enabled) {
+ if (save->crtc_enabled[i]) {
if (ASIC_IS_DCE6(rdev)) {
tmp = RREG32(EVERGREEN_CRTC_BLANK_CONTROL + crtc_offsets[i]);
tmp |= EVERGREEN_CRTC_BLANK_DATA_EN;
diff --git a/drivers/gpu/drm/radeon/evergreen_cs.c b/drivers/gpu/drm/radeon/evergreen_cs.c
index 573ed1b..c042e49 100644
--- a/drivers/gpu/drm/radeon/evergreen_cs.c
+++ b/drivers/gpu/drm/radeon/evergreen_cs.c
@@ -264,7 +264,7 @@
/* macro tile width & height */
palign = (8 * surf->bankw * track->npipes) * surf->mtilea;
halign = (8 * surf->bankh * surf->nbanks) / surf->mtilea;
- mtileb = (palign / 8) * (halign / 8) * tileb;;
+ mtileb = (palign / 8) * (halign / 8) * tileb;
mtile_pr = surf->nbx / palign;
mtile_ps = (mtile_pr * surf->nby) / halign;
surf->layer_size = mtile_ps * mtileb * slice_pt;
@@ -2725,6 +2725,9 @@
/* check config regs */
switch (reg) {
case GRBM_GFX_INDEX:
+ case CP_STRMOUT_CNTL:
+ case CP_COHER_CNTL:
+ case CP_COHER_SIZE:
case VGT_VTX_VECT_EJECT_REG:
case VGT_CACHE_INVALIDATION:
case VGT_GS_VERTEX_REUSE:
@@ -2829,6 +2832,7 @@
case CAYMAN_SQ_EX_ALLOC_TABLE_SLOTS:
return true;
default:
+ DRM_ERROR("Invalid register 0x%x in CS\n", reg);
return false;
}
}
diff --git a/drivers/gpu/drm/radeon/evergreend.h b/drivers/gpu/drm/radeon/evergreend.h
index df542f1..2bc0f6a 100644
--- a/drivers/gpu/drm/radeon/evergreend.h
+++ b/drivers/gpu/drm/radeon/evergreend.h
@@ -91,6 +91,10 @@
#define FB_READ_EN (1 << 0)
#define FB_WRITE_EN (1 << 1)
+#define CP_STRMOUT_CNTL 0x84FC
+
+#define CP_COHER_CNTL 0x85F0
+#define CP_COHER_SIZE 0x85F4
#define CP_COHER_BASE 0x85F8
#define CP_STALLED_STAT1 0x8674
#define CP_STALLED_STAT2 0x8678
diff --git a/drivers/gpu/drm/radeon/ni.c b/drivers/gpu/drm/radeon/ni.c
index 8c74c72..81e6a56 100644
--- a/drivers/gpu/drm/radeon/ni.c
+++ b/drivers/gpu/drm/radeon/ni.c
@@ -1538,26 +1538,31 @@
{
struct radeon_ring *ring = &rdev->ring[rdev->asic->vm.pt_ring_index];
uint32_t r600_flags = cayman_vm_page_flags(rdev, flags);
- int i;
- radeon_ring_write(ring, PACKET3(PACKET3_ME_WRITE, 1 + count * 2));
- radeon_ring_write(ring, pe);
- radeon_ring_write(ring, upper_32_bits(pe) & 0xff);
- for (i = 0; i < count; ++i) {
- uint64_t value = 0;
- if (flags & RADEON_VM_PAGE_SYSTEM) {
- value = radeon_vm_map_gart(rdev, addr);
- value &= 0xFFFFFFFFFFFFF000ULL;
- addr += incr;
+ while (count) {
+ unsigned ndw = 1 + count * 2;
+ if (ndw > 0x3FFF)
+ ndw = 0x3FFF;
- } else if (flags & RADEON_VM_PAGE_VALID) {
- value = addr;
- addr += incr;
+ radeon_ring_write(ring, PACKET3(PACKET3_ME_WRITE, ndw));
+ radeon_ring_write(ring, pe);
+ radeon_ring_write(ring, upper_32_bits(pe) & 0xff);
+ for (; ndw > 1; ndw -= 2, --count, pe += 8) {
+ uint64_t value = 0;
+ if (flags & RADEON_VM_PAGE_SYSTEM) {
+ value = radeon_vm_map_gart(rdev, addr);
+ value &= 0xFFFFFFFFFFFFF000ULL;
+ addr += incr;
+
+ } else if (flags & RADEON_VM_PAGE_VALID) {
+ value = addr;
+ addr += incr;
+ }
+
+ value |= r600_flags;
+ radeon_ring_write(ring, value);
+ radeon_ring_write(ring, upper_32_bits(value));
}
-
- value |= r600_flags;
- radeon_ring_write(ring, value);
- radeon_ring_write(ring, upper_32_bits(value));
}
}
@@ -1586,4 +1591,8 @@
/* bits 0-7 are the VM contexts0-7 */
radeon_ring_write(ring, PACKET0(VM_INVALIDATE_REQUEST, 0));
radeon_ring_write(ring, 1 << vm->id);
+
+ /* sync PFP to ME, otherwise we might get invalid PFP reads */
+ radeon_ring_write(ring, PACKET3(PACKET3_PFP_SYNC_ME, 0));
+ radeon_ring_write(ring, 0x0);
}
diff --git a/drivers/gpu/drm/radeon/nid.h b/drivers/gpu/drm/radeon/nid.h
index 2423d1b..cbef681 100644
--- a/drivers/gpu/drm/radeon/nid.h
+++ b/drivers/gpu/drm/radeon/nid.h
@@ -502,6 +502,7 @@
#define PACKET3_MPEG_INDEX 0x3A
#define PACKET3_WAIT_REG_MEM 0x3C
#define PACKET3_MEM_WRITE 0x3D
+#define PACKET3_PFP_SYNC_ME 0x42
#define PACKET3_SURFACE_SYNC 0x43
# define PACKET3_CB0_DEST_BASE_ENA (1 << 6)
# define PACKET3_CB1_DEST_BASE_ENA (1 << 7)
diff --git a/drivers/gpu/drm/radeon/radeon_agp.c b/drivers/gpu/drm/radeon/radeon_agp.c
index 10ea17a..4243334 100644
--- a/drivers/gpu/drm/radeon/radeon_agp.c
+++ b/drivers/gpu/drm/radeon/radeon_agp.c
@@ -69,9 +69,12 @@
/* Intel 82830 830 Chipset Host Bridge / Mobility M6 LY Needs AGPMode 2 (fdo #17360)*/
{ PCI_VENDOR_ID_INTEL, 0x3575, PCI_VENDOR_ID_ATI, 0x4c59,
PCI_VENDOR_ID_DELL, 0x00e3, 2},
- /* Intel 82852/82855 host bridge / Mobility FireGL 9000 R250 Needs AGPMode 1 (lp #296617) */
+ /* Intel 82852/82855 host bridge / Mobility FireGL 9000 RV250 Needs AGPMode 1 (lp #296617) */
{ PCI_VENDOR_ID_INTEL, 0x3580, PCI_VENDOR_ID_ATI, 0x4c66,
PCI_VENDOR_ID_DELL, 0x0149, 1},
+ /* Intel 82855PM host bridge / Mobility FireGL 9000 RV250 Needs AGPMode 1 for suspend/resume */
+ { PCI_VENDOR_ID_INTEL, 0x3340, PCI_VENDOR_ID_ATI, 0x4c66,
+ PCI_VENDOR_ID_IBM, 0x0531, 1},
/* Intel 82852/82855 host bridge / Mobility 9600 M10 RV350 Needs AGPMode 1 (deb #467460) */
{ PCI_VENDOR_ID_INTEL, 0x3580, PCI_VENDOR_ID_ATI, 0x4e50,
0x1025, 0x0061, 1},
diff --git a/drivers/gpu/drm/radeon/radeon_atpx_handler.c b/drivers/gpu/drm/radeon/radeon_atpx_handler.c
index 1aa3f91..15f5ded 100644
--- a/drivers/gpu/drm/radeon/radeon_atpx_handler.c
+++ b/drivers/gpu/drm/radeon/radeon_atpx_handler.c
@@ -87,7 +87,7 @@
atpx_arg_elements[1].integer.value = 0;
}
- status = acpi_evaluate_object(handle, "ATPX", &atpx_arg, &buffer);
+ status = acpi_evaluate_object(handle, NULL, &atpx_arg, &buffer);
/* Fail only if calling the method fails and ATPX is supported */
if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
@@ -352,9 +352,9 @@
}
/**
- * radeon_atpx_switchto - switch to the requested GPU
+ * radeon_atpx_power_state - power down/up the requested GPU
*
- * @id: GPU to switch to
+ * @id: GPU to power down/up
* @state: requested power state (0 = off, 1 = on)
*
* Execute the necessary ATPX function to power down/up the discrete GPU
@@ -373,11 +373,11 @@
}
/**
- * radeon_atpx_pci_probe_handle - look up the ATRM and ATPX handles
+ * radeon_atpx_pci_probe_handle - look up the ATPX handle
*
* @pdev: pci device
*
- * Look up the ATPX and ATRM handles (all asics).
+ * Look up the ATPX handles (all asics).
* Returns true if the handles are found, false if not.
*/
static bool radeon_atpx_pci_probe_handle(struct pci_dev *pdev)
diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c
index 67cfc17..b884c36 100644
--- a/drivers/gpu/drm/radeon/radeon_connectors.c
+++ b/drivers/gpu/drm/radeon/radeon_connectors.c
@@ -941,7 +941,7 @@
struct drm_mode_object *obj;
int i;
enum drm_connector_status ret = connector_status_disconnected;
- bool dret = false;
+ bool dret = false, broken_edid = false;
if (!force && radeon_check_hpd_status_unchanged(connector))
return connector->status;
@@ -965,6 +965,9 @@
ret = connector_status_disconnected;
DRM_ERROR("%s: detected RS690 floating bus bug, stopping ddc detect\n", drm_get_connector_name(connector));
radeon_connector->ddc_bus = NULL;
+ } else {
+ ret = connector_status_connected;
+ broken_edid = true; /* defer use_digital to later */
}
} else {
radeon_connector->use_digital = !!(radeon_connector->edid->input & DRM_EDID_INPUT_DIGITAL);
@@ -1047,13 +1050,24 @@
encoder_funcs = encoder->helper_private;
if (encoder_funcs->detect) {
- if (ret != connector_status_connected) {
- ret = encoder_funcs->detect(encoder, connector);
- if (ret == connector_status_connected) {
- radeon_connector->use_digital = false;
+ if (!broken_edid) {
+ if (ret != connector_status_connected) {
+ /* deal with analog monitors without DDC */
+ ret = encoder_funcs->detect(encoder, connector);
+ if (ret == connector_status_connected) {
+ radeon_connector->use_digital = false;
+ }
+ if (ret != connector_status_disconnected)
+ radeon_connector->detected_by_load = true;
}
- if (ret != connector_status_disconnected)
- radeon_connector->detected_by_load = true;
+ } else {
+ enum drm_connector_status lret;
+ /* assume digital unless load detected otherwise */
+ radeon_connector->use_digital = true;
+ lret = encoder_funcs->detect(encoder, connector);
+ DRM_DEBUG_KMS("load_detect %x returned: %x\n",encoder->encoder_type,lret);
+ if (lret == connector_status_connected)
+ radeon_connector->use_digital = false;
}
break;
}
diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c
index bd13ca0..e2f5f88 100644
--- a/drivers/gpu/drm/radeon/radeon_device.c
+++ b/drivers/gpu/drm/radeon/radeon_device.c
@@ -355,6 +355,8 @@
*/
void radeon_vram_location(struct radeon_device *rdev, struct radeon_mc *mc, u64 base)
{
+ uint64_t limit = (uint64_t)radeon_vram_limit << 20;
+
mc->vram_start = base;
if (mc->mc_vram_size > (0xFFFFFFFF - base + 1)) {
dev_warn(rdev->dev, "limiting VRAM to PCI aperture size\n");
@@ -368,8 +370,8 @@
mc->mc_vram_size = mc->aper_size;
}
mc->vram_end = mc->vram_start + mc->mc_vram_size - 1;
- if (radeon_vram_limit && radeon_vram_limit < mc->real_vram_size)
- mc->real_vram_size = radeon_vram_limit;
+ if (limit && limit < mc->real_vram_size)
+ mc->real_vram_size = limit;
dev_info(rdev->dev, "VRAM: %lluM 0x%016llX - 0x%016llX (%lluM used)\n",
mc->mc_vram_size >> 20, mc->vram_start,
mc->vram_end, mc->real_vram_size >> 20);
@@ -835,6 +837,19 @@
}
/**
+ * radeon_check_pot_argument - check that argument is a power of two
+ *
+ * @arg: value to check
+ *
+ * Validates that a certain argument is a power of two (all asics).
+ * Returns true if argument is valid.
+ */
+static bool radeon_check_pot_argument(int arg)
+{
+ return (arg & (arg - 1)) == 0;
+}
+
+/**
* radeon_check_arguments - validate module params
*
* @rdev: radeon_device pointer
@@ -845,52 +860,25 @@
static void radeon_check_arguments(struct radeon_device *rdev)
{
/* vramlimit must be a power of two */
- switch (radeon_vram_limit) {
- case 0:
- case 4:
- case 8:
- case 16:
- case 32:
- case 64:
- case 128:
- case 256:
- case 512:
- case 1024:
- case 2048:
- case 4096:
- break;
- default:
+ if (!radeon_check_pot_argument(radeon_vram_limit)) {
dev_warn(rdev->dev, "vram limit (%d) must be a power of 2\n",
radeon_vram_limit);
radeon_vram_limit = 0;
- break;
}
- radeon_vram_limit = radeon_vram_limit << 20;
+
/* gtt size must be power of two and greater or equal to 32M */
- switch (radeon_gart_size) {
- case 4:
- case 8:
- case 16:
+ if (radeon_gart_size < 32) {
dev_warn(rdev->dev, "gart size (%d) too small forcing to 512M\n",
radeon_gart_size);
radeon_gart_size = 512;
- break;
- case 32:
- case 64:
- case 128:
- case 256:
- case 512:
- case 1024:
- case 2048:
- case 4096:
- break;
- default:
+
+ } else if (!radeon_check_pot_argument(radeon_gart_size)) {
dev_warn(rdev->dev, "gart size (%d) must be a power of 2\n",
radeon_gart_size);
radeon_gart_size = 512;
- break;
}
- rdev->mc.gtt_size = radeon_gart_size * 1024 * 1024;
+ rdev->mc.gtt_size = (uint64_t)radeon_gart_size << 20;
+
/* AGP mode can only be -1, 1, 2, 4, 8 */
switch (radeon_agpmode) {
case -1:
diff --git a/drivers/gpu/drm/radeon/radeon_gart.c b/drivers/gpu/drm/radeon/radeon_gart.c
index a7677dd..4debd60 100644
--- a/drivers/gpu/drm/radeon/radeon_gart.c
+++ b/drivers/gpu/drm/radeon/radeon_gart.c
@@ -355,14 +355,13 @@
DRM_INFO("GART: num cpu pages %u, num gpu pages %u\n",
rdev->gart.num_cpu_pages, rdev->gart.num_gpu_pages);
/* Allocate pages table */
- rdev->gart.pages = kzalloc(sizeof(void *) * rdev->gart.num_cpu_pages,
- GFP_KERNEL);
+ rdev->gart.pages = vzalloc(sizeof(void *) * rdev->gart.num_cpu_pages);
if (rdev->gart.pages == NULL) {
radeon_gart_fini(rdev);
return -ENOMEM;
}
- rdev->gart.pages_addr = kzalloc(sizeof(dma_addr_t) *
- rdev->gart.num_cpu_pages, GFP_KERNEL);
+ rdev->gart.pages_addr = vzalloc(sizeof(dma_addr_t) *
+ rdev->gart.num_cpu_pages);
if (rdev->gart.pages_addr == NULL) {
radeon_gart_fini(rdev);
return -ENOMEM;
@@ -388,8 +387,8 @@
radeon_gart_unbind(rdev, 0, rdev->gart.num_cpu_pages);
}
rdev->gart.ready = false;
- kfree(rdev->gart.pages);
- kfree(rdev->gart.pages_addr);
+ vfree(rdev->gart.pages);
+ vfree(rdev->gart.pages_addr);
rdev->gart.pages = NULL;
rdev->gart.pages_addr = NULL;
@@ -577,7 +576,7 @@
*
* Global and local mutex must be locked!
*/
-int radeon_vm_evict(struct radeon_device *rdev, struct radeon_vm *vm)
+static int radeon_vm_evict(struct radeon_device *rdev, struct radeon_vm *vm)
{
struct radeon_vm *vm_evict;
@@ -1036,8 +1035,7 @@
pte = radeon_sa_bo_gpu_addr(vm->page_tables[pt_idx]);
pte += (addr & mask) * 8;
- if (((last_pte + 8 * count) != pte) ||
- ((count + nptes) > 1 << 11)) {
+ if ((last_pte + 8 * count) != pte) {
if (count) {
radeon_asic_vm_set_page(rdev, last_pte,
@@ -1148,17 +1146,17 @@
if (RADEON_VM_BLOCK_SIZE > 11)
/* reserve space for one header for every 2k dwords */
- ndw += (nptes >> 11) * 3;
+ ndw += (nptes >> 11) * 4;
else
/* reserve space for one header for
every (1 << BLOCK_SIZE) entries */
- ndw += (nptes >> RADEON_VM_BLOCK_SIZE) * 3;
+ ndw += (nptes >> RADEON_VM_BLOCK_SIZE) * 4;
/* reserve space for pte addresses */
ndw += nptes * 2;
/* reserve space for one header for every 2k dwords */
- ndw += (npdes >> 11) * 3;
+ ndw += (npdes >> 11) * 4;
/* reserve space for pde addresses */
ndw += npdes * 2;
diff --git a/drivers/gpu/drm/radeon/radeon_gem.c b/drivers/gpu/drm/radeon/radeon_gem.c
index f38fbcc..fe5c1f6 100644
--- a/drivers/gpu/drm/radeon/radeon_gem.c
+++ b/drivers/gpu/drm/radeon/radeon_gem.c
@@ -53,6 +53,7 @@
struct drm_gem_object **obj)
{
struct radeon_bo *robj;
+ unsigned long max_size;
int r;
*obj = NULL;
@@ -60,11 +61,26 @@
if (alignment < PAGE_SIZE) {
alignment = PAGE_SIZE;
}
+
+ /* maximun bo size is the minimun btw visible vram and gtt size */
+ max_size = min(rdev->mc.visible_vram_size, rdev->mc.gtt_size);
+ if (size > max_size) {
+ printk(KERN_WARNING "%s:%d alloc size %dMb bigger than %ldMb limit\n",
+ __func__, __LINE__, size >> 20, max_size >> 20);
+ return -ENOMEM;
+ }
+
+retry:
r = radeon_bo_create(rdev, size, alignment, kernel, initial_domain, NULL, &robj);
if (r) {
- if (r != -ERESTARTSYS)
+ if (r != -ERESTARTSYS) {
+ if (initial_domain == RADEON_GEM_DOMAIN_VRAM) {
+ initial_domain |= RADEON_GEM_DOMAIN_GTT;
+ goto retry;
+ }
DRM_ERROR("Failed to allocate GEM object (%d, %d, %u, %d)\n",
size, initial_domain, alignment, r);
+ }
return r;
}
*obj = &robj->gem_base;
diff --git a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c
index 5677a42..6857cb4 100644
--- a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c
+++ b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c
@@ -295,6 +295,7 @@
struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
struct drm_device *dev = crtc->dev;
struct radeon_device *rdev = dev->dev_private;
+ uint32_t crtc_ext_cntl = 0;
uint32_t mask;
if (radeon_crtc->crtc_id)
@@ -307,6 +308,16 @@
RADEON_CRTC_VSYNC_DIS |
RADEON_CRTC_HSYNC_DIS);
+ /*
+ * On all dual CRTC GPUs this bit controls the CRTC of the primary DAC.
+ * Therefore it is set in the DAC DMPS function.
+ * This is different for GPU's with a single CRTC but a primary and a
+ * TV DAC: here it controls the single CRTC no matter where it is
+ * routed. Therefore we set it here.
+ */
+ if (rdev->flags & RADEON_SINGLE_CRTC)
+ crtc_ext_cntl = RADEON_CRTC_CRT_ON;
+
switch (mode) {
case DRM_MODE_DPMS_ON:
radeon_crtc->enabled = true;
@@ -317,7 +328,7 @@
else {
WREG32_P(RADEON_CRTC_GEN_CNTL, RADEON_CRTC_EN, ~(RADEON_CRTC_EN |
RADEON_CRTC_DISP_REQ_EN_B));
- WREG32_P(RADEON_CRTC_EXT_CNTL, 0, ~mask);
+ WREG32_P(RADEON_CRTC_EXT_CNTL, crtc_ext_cntl, ~(mask | crtc_ext_cntl));
}
drm_vblank_post_modeset(dev, radeon_crtc->crtc_id);
radeon_crtc_load_lut(crtc);
@@ -331,7 +342,7 @@
else {
WREG32_P(RADEON_CRTC_GEN_CNTL, RADEON_CRTC_DISP_REQ_EN_B, ~(RADEON_CRTC_EN |
RADEON_CRTC_DISP_REQ_EN_B));
- WREG32_P(RADEON_CRTC_EXT_CNTL, mask, ~mask);
+ WREG32_P(RADEON_CRTC_EXT_CNTL, mask, ~(mask | crtc_ext_cntl));
}
radeon_crtc->enabled = false;
/* adjust pm to dpms changes AFTER disabling crtcs */
diff --git a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c
index a13ad9d..f5ba224 100644
--- a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c
+++ b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c
@@ -370,6 +370,7 @@
struct backlight_properties props;
struct radeon_backlight_privdata *pdata;
uint8_t backlight_level;
+ char bl_name[16];
if (!radeon_encoder->enc_priv)
return;
@@ -389,7 +390,9 @@
memset(&props, 0, sizeof(props));
props.max_brightness = RADEON_MAX_BL_LEVEL;
props.type = BACKLIGHT_RAW;
- bd = backlight_device_register("radeon_bl", &drm_connector->kdev,
+ snprintf(bl_name, sizeof(bl_name),
+ "radeon_bl%d", dev->primary->index);
+ bd = backlight_device_register(bl_name, &drm_connector->kdev,
pdata, &radeon_backlight_ops, &props);
if (IS_ERR(bd)) {
DRM_ERROR("Backlight registration failed\n");
@@ -534,7 +537,9 @@
break;
}
- WREG32(RADEON_CRTC_EXT_CNTL, crtc_ext_cntl);
+ /* handled in radeon_crtc_dpms() */
+ if (!(rdev->flags & RADEON_SINGLE_CRTC))
+ WREG32(RADEON_CRTC_EXT_CNTL, crtc_ext_cntl);
WREG32(RADEON_DAC_CNTL, dac_cntl);
WREG32(RADEON_DAC_MACRO_CNTL, dac_macro_cntl);
@@ -659,6 +664,8 @@
if (ASIC_IS_R300(rdev))
tmp |= (0x1b6 << RADEON_DAC_FORCE_DATA_SHIFT);
+ else if (ASIC_IS_RV100(rdev))
+ tmp |= (0x1ac << RADEON_DAC_FORCE_DATA_SHIFT);
else
tmp |= (0x180 << RADEON_DAC_FORCE_DATA_SHIFT);
@@ -668,6 +675,7 @@
tmp |= RADEON_DAC_RANGE_CNTL_PS2 | RADEON_DAC_CMP_EN;
WREG32(RADEON_DAC_CNTL, tmp);
+ tmp = dac_macro_cntl;
tmp &= ~(RADEON_DAC_PDWN_R |
RADEON_DAC_PDWN_G |
RADEON_DAC_PDWN_B);
@@ -1089,7 +1097,8 @@
} else {
if (is_tv)
WREG32(RADEON_TV_MASTER_CNTL, tv_master_cntl);
- else
+ /* handled in radeon_crtc_dpms() */
+ else if (!(rdev->flags & RADEON_SINGLE_CRTC))
WREG32(RADEON_CRTC2_GEN_CNTL, crtc2_gen_cntl);
WREG32(RADEON_TV_DAC_CNTL, tv_dac_cntl);
}
@@ -1413,13 +1422,104 @@
return found;
}
+static bool radeon_legacy_ext_dac_detect(struct drm_encoder *encoder,
+ struct drm_connector *connector)
+{
+ struct drm_device *dev = encoder->dev;
+ struct radeon_device *rdev = dev->dev_private;
+ uint32_t gpio_monid, fp2_gen_cntl, disp_output_cntl, crtc2_gen_cntl;
+ uint32_t disp_lin_trans_grph_a, disp_lin_trans_grph_b, disp_lin_trans_grph_c;
+ uint32_t disp_lin_trans_grph_d, disp_lin_trans_grph_e, disp_lin_trans_grph_f;
+ uint32_t tmp, crtc2_h_total_disp, crtc2_v_total_disp;
+ uint32_t crtc2_h_sync_strt_wid, crtc2_v_sync_strt_wid;
+ bool found = false;
+ int i;
+
+ /* save the regs we need */
+ gpio_monid = RREG32(RADEON_GPIO_MONID);
+ fp2_gen_cntl = RREG32(RADEON_FP2_GEN_CNTL);
+ disp_output_cntl = RREG32(RADEON_DISP_OUTPUT_CNTL);
+ crtc2_gen_cntl = RREG32(RADEON_CRTC2_GEN_CNTL);
+ disp_lin_trans_grph_a = RREG32(RADEON_DISP_LIN_TRANS_GRPH_A);
+ disp_lin_trans_grph_b = RREG32(RADEON_DISP_LIN_TRANS_GRPH_B);
+ disp_lin_trans_grph_c = RREG32(RADEON_DISP_LIN_TRANS_GRPH_C);
+ disp_lin_trans_grph_d = RREG32(RADEON_DISP_LIN_TRANS_GRPH_D);
+ disp_lin_trans_grph_e = RREG32(RADEON_DISP_LIN_TRANS_GRPH_E);
+ disp_lin_trans_grph_f = RREG32(RADEON_DISP_LIN_TRANS_GRPH_F);
+ crtc2_h_total_disp = RREG32(RADEON_CRTC2_H_TOTAL_DISP);
+ crtc2_v_total_disp = RREG32(RADEON_CRTC2_V_TOTAL_DISP);
+ crtc2_h_sync_strt_wid = RREG32(RADEON_CRTC2_H_SYNC_STRT_WID);
+ crtc2_v_sync_strt_wid = RREG32(RADEON_CRTC2_V_SYNC_STRT_WID);
+
+ tmp = RREG32(RADEON_GPIO_MONID);
+ tmp &= ~RADEON_GPIO_A_0;
+ WREG32(RADEON_GPIO_MONID, tmp);
+
+ WREG32(RADEON_FP2_GEN_CNTL, (RADEON_FP2_ON |
+ RADEON_FP2_PANEL_FORMAT |
+ R200_FP2_SOURCE_SEL_TRANS_UNIT |
+ RADEON_FP2_DVO_EN |
+ R200_FP2_DVO_RATE_SEL_SDR));
+
+ WREG32(RADEON_DISP_OUTPUT_CNTL, (RADEON_DISP_DAC_SOURCE_RMX |
+ RADEON_DISP_TRANS_MATRIX_GRAPHICS));
+
+ WREG32(RADEON_CRTC2_GEN_CNTL, (RADEON_CRTC2_EN |
+ RADEON_CRTC2_DISP_REQ_EN_B));
+
+ WREG32(RADEON_DISP_LIN_TRANS_GRPH_A, 0x00000000);
+ WREG32(RADEON_DISP_LIN_TRANS_GRPH_B, 0x000003f0);
+ WREG32(RADEON_DISP_LIN_TRANS_GRPH_C, 0x00000000);
+ WREG32(RADEON_DISP_LIN_TRANS_GRPH_D, 0x000003f0);
+ WREG32(RADEON_DISP_LIN_TRANS_GRPH_E, 0x00000000);
+ WREG32(RADEON_DISP_LIN_TRANS_GRPH_F, 0x000003f0);
+
+ WREG32(RADEON_CRTC2_H_TOTAL_DISP, 0x01000008);
+ WREG32(RADEON_CRTC2_H_SYNC_STRT_WID, 0x00000800);
+ WREG32(RADEON_CRTC2_V_TOTAL_DISP, 0x00080001);
+ WREG32(RADEON_CRTC2_V_SYNC_STRT_WID, 0x00000080);
+
+ for (i = 0; i < 200; i++) {
+ tmp = RREG32(RADEON_GPIO_MONID);
+ if (tmp & RADEON_GPIO_Y_0)
+ found = true;
+
+ if (found)
+ break;
+
+ if (!drm_can_sleep())
+ mdelay(1);
+ else
+ msleep(1);
+ }
+
+ /* restore the regs we used */
+ WREG32(RADEON_DISP_LIN_TRANS_GRPH_A, disp_lin_trans_grph_a);
+ WREG32(RADEON_DISP_LIN_TRANS_GRPH_B, disp_lin_trans_grph_b);
+ WREG32(RADEON_DISP_LIN_TRANS_GRPH_C, disp_lin_trans_grph_c);
+ WREG32(RADEON_DISP_LIN_TRANS_GRPH_D, disp_lin_trans_grph_d);
+ WREG32(RADEON_DISP_LIN_TRANS_GRPH_E, disp_lin_trans_grph_e);
+ WREG32(RADEON_DISP_LIN_TRANS_GRPH_F, disp_lin_trans_grph_f);
+ WREG32(RADEON_CRTC2_H_TOTAL_DISP, crtc2_h_total_disp);
+ WREG32(RADEON_CRTC2_V_TOTAL_DISP, crtc2_v_total_disp);
+ WREG32(RADEON_CRTC2_H_SYNC_STRT_WID, crtc2_h_sync_strt_wid);
+ WREG32(RADEON_CRTC2_V_SYNC_STRT_WID, crtc2_v_sync_strt_wid);
+ WREG32(RADEON_CRTC2_GEN_CNTL, crtc2_gen_cntl);
+ WREG32(RADEON_DISP_OUTPUT_CNTL, disp_output_cntl);
+ WREG32(RADEON_FP2_GEN_CNTL, fp2_gen_cntl);
+ WREG32(RADEON_GPIO_MONID, gpio_monid);
+
+ return found;
+}
+
static enum drm_connector_status radeon_legacy_tv_dac_detect(struct drm_encoder *encoder,
struct drm_connector *connector)
{
struct drm_device *dev = encoder->dev;
struct radeon_device *rdev = dev->dev_private;
- uint32_t crtc2_gen_cntl, tv_dac_cntl, dac_cntl2, dac_ext_cntl;
- uint32_t disp_hw_debug, disp_output_cntl, gpiopad_a, pixclks_cntl, tmp;
+ uint32_t crtc2_gen_cntl = 0, tv_dac_cntl, dac_cntl2, dac_ext_cntl;
+ uint32_t gpiopad_a = 0, pixclks_cntl, tmp;
+ uint32_t disp_output_cntl = 0, disp_hw_debug = 0, crtc_ext_cntl = 0;
enum drm_connector_status found = connector_status_disconnected;
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
struct radeon_encoder_tv_dac *tv_dac = radeon_encoder->enc_priv;
@@ -1456,12 +1556,27 @@
return connector_status_disconnected;
}
+ /* R200 uses an external DAC for secondary DAC */
+ if (rdev->family == CHIP_R200) {
+ if (radeon_legacy_ext_dac_detect(encoder, connector))
+ found = connector_status_connected;
+ return found;
+ }
+
/* save the regs we need */
pixclks_cntl = RREG32_PLL(RADEON_PIXCLKS_CNTL);
- gpiopad_a = ASIC_IS_R300(rdev) ? RREG32(RADEON_GPIOPAD_A) : 0;
- disp_output_cntl = ASIC_IS_R300(rdev) ? RREG32(RADEON_DISP_OUTPUT_CNTL) : 0;
- disp_hw_debug = ASIC_IS_R300(rdev) ? 0 : RREG32(RADEON_DISP_HW_DEBUG);
- crtc2_gen_cntl = RREG32(RADEON_CRTC2_GEN_CNTL);
+
+ if (rdev->flags & RADEON_SINGLE_CRTC) {
+ crtc_ext_cntl = RREG32(RADEON_CRTC_EXT_CNTL);
+ } else {
+ if (ASIC_IS_R300(rdev)) {
+ gpiopad_a = RREG32(RADEON_GPIOPAD_A);
+ disp_output_cntl = RREG32(RADEON_DISP_OUTPUT_CNTL);
+ } else {
+ disp_hw_debug = RREG32(RADEON_DISP_HW_DEBUG);
+ }
+ crtc2_gen_cntl = RREG32(RADEON_CRTC2_GEN_CNTL);
+ }
tv_dac_cntl = RREG32(RADEON_TV_DAC_CNTL);
dac_ext_cntl = RREG32(RADEON_DAC_EXT_CNTL);
dac_cntl2 = RREG32(RADEON_DAC_CNTL2);
@@ -1470,22 +1585,24 @@
| RADEON_PIX2CLK_DAC_ALWAYS_ONb);
WREG32_PLL(RADEON_PIXCLKS_CNTL, tmp);
- if (ASIC_IS_R300(rdev))
- WREG32_P(RADEON_GPIOPAD_A, 1, ~1);
-
- tmp = crtc2_gen_cntl & ~RADEON_CRTC2_PIX_WIDTH_MASK;
- tmp |= RADEON_CRTC2_CRT2_ON |
- (2 << RADEON_CRTC2_PIX_WIDTH_SHIFT);
-
- WREG32(RADEON_CRTC2_GEN_CNTL, tmp);
-
- if (ASIC_IS_R300(rdev)) {
- tmp = disp_output_cntl & ~RADEON_DISP_TVDAC_SOURCE_MASK;
- tmp |= RADEON_DISP_TVDAC_SOURCE_CRTC2;
- WREG32(RADEON_DISP_OUTPUT_CNTL, tmp);
+ if (rdev->flags & RADEON_SINGLE_CRTC) {
+ tmp = crtc_ext_cntl | RADEON_CRTC_CRT_ON;
+ WREG32(RADEON_CRTC_EXT_CNTL, tmp);
} else {
- tmp = disp_hw_debug & ~RADEON_CRT2_DISP1_SEL;
- WREG32(RADEON_DISP_HW_DEBUG, tmp);
+ tmp = crtc2_gen_cntl & ~RADEON_CRTC2_PIX_WIDTH_MASK;
+ tmp |= RADEON_CRTC2_CRT2_ON |
+ (2 << RADEON_CRTC2_PIX_WIDTH_SHIFT);
+ WREG32(RADEON_CRTC2_GEN_CNTL, tmp);
+
+ if (ASIC_IS_R300(rdev)) {
+ WREG32_P(RADEON_GPIOPAD_A, 1, ~1);
+ tmp = disp_output_cntl & ~RADEON_DISP_TVDAC_SOURCE_MASK;
+ tmp |= RADEON_DISP_TVDAC_SOURCE_CRTC2;
+ WREG32(RADEON_DISP_OUTPUT_CNTL, tmp);
+ } else {
+ tmp = disp_hw_debug & ~RADEON_CRT2_DISP1_SEL;
+ WREG32(RADEON_DISP_HW_DEBUG, tmp);
+ }
}
tmp = RADEON_TV_DAC_NBLANK |
@@ -1527,14 +1644,19 @@
WREG32(RADEON_DAC_CNTL2, dac_cntl2);
WREG32(RADEON_DAC_EXT_CNTL, dac_ext_cntl);
WREG32(RADEON_TV_DAC_CNTL, tv_dac_cntl);
- WREG32(RADEON_CRTC2_GEN_CNTL, crtc2_gen_cntl);
- if (ASIC_IS_R300(rdev)) {
- WREG32(RADEON_DISP_OUTPUT_CNTL, disp_output_cntl);
- WREG32_P(RADEON_GPIOPAD_A, gpiopad_a, ~1);
+ if (rdev->flags & RADEON_SINGLE_CRTC) {
+ WREG32(RADEON_CRTC_EXT_CNTL, crtc_ext_cntl);
} else {
- WREG32(RADEON_DISP_HW_DEBUG, disp_hw_debug);
+ WREG32(RADEON_CRTC2_GEN_CNTL, crtc2_gen_cntl);
+ if (ASIC_IS_R300(rdev)) {
+ WREG32(RADEON_DISP_OUTPUT_CNTL, disp_output_cntl);
+ WREG32_P(RADEON_GPIOPAD_A, gpiopad_a, ~1);
+ } else {
+ WREG32(RADEON_DISP_HW_DEBUG, disp_hw_debug);
+ }
}
+
WREG32_PLL(RADEON_PIXCLKS_CNTL, pixclks_cntl);
return found;
diff --git a/drivers/gpu/drm/radeon/radeon_object.c b/drivers/gpu/drm/radeon/radeon_object.c
index 8b27dd6..b91118c 100644
--- a/drivers/gpu/drm/radeon/radeon_object.c
+++ b/drivers/gpu/drm/radeon/radeon_object.c
@@ -105,7 +105,6 @@
struct radeon_bo *bo;
enum ttm_bo_type type;
unsigned long page_align = roundup(byte_align, PAGE_SIZE) >> PAGE_SHIFT;
- unsigned long max_size = 0;
size_t acc_size;
int r;
@@ -121,18 +120,9 @@
}
*bo_ptr = NULL;
- /* maximun bo size is the minimun btw visible vram and gtt size */
- max_size = min(rdev->mc.visible_vram_size, rdev->mc.gtt_size);
- if ((page_align << PAGE_SHIFT) >= max_size) {
- printk(KERN_WARNING "%s:%d alloc size %ldM bigger than %ldMb limit\n",
- __func__, __LINE__, page_align >> (20 - PAGE_SHIFT), max_size >> 20);
- return -ENOMEM;
- }
-
acc_size = ttm_bo_dma_acc_size(&rdev->mman.bdev, size,
sizeof(struct radeon_bo));
-retry:
bo = kzalloc(sizeof(struct radeon_bo), GFP_KERNEL);
if (bo == NULL)
return -ENOMEM;
@@ -154,15 +144,6 @@
acc_size, sg, &radeon_ttm_bo_destroy);
up_read(&rdev->pm.mclk_lock);
if (unlikely(r != 0)) {
- if (r != -ERESTARTSYS) {
- if (domain == RADEON_GEM_DOMAIN_VRAM) {
- domain |= RADEON_GEM_DOMAIN_GTT;
- goto retry;
- }
- dev_err(rdev->dev,
- "object_init failed for (%lu, 0x%08X)\n",
- size, domain);
- }
return r;
}
*bo_ptr = bo;
diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c
index df8dd770..4422d63 100644
--- a/drivers/gpu/drm/radeon/si.c
+++ b/drivers/gpu/drm/radeon/si.c
@@ -2474,6 +2474,7 @@
/* check config regs */
switch (reg) {
case GRBM_GFX_INDEX:
+ case CP_STRMOUT_CNTL:
case VGT_VTX_VECT_EJECT_REG:
case VGT_CACHE_INVALIDATION:
case VGT_ESGS_RING_SIZE:
@@ -2808,26 +2809,31 @@
{
struct radeon_ring *ring = &rdev->ring[rdev->asic->vm.pt_ring_index];
uint32_t r600_flags = cayman_vm_page_flags(rdev, flags);
- int i;
- uint64_t value;
- radeon_ring_write(ring, PACKET3(PACKET3_WRITE_DATA, 2 + count * 2));
- radeon_ring_write(ring, (WRITE_DATA_ENGINE_SEL(0) |
- WRITE_DATA_DST_SEL(1)));
- radeon_ring_write(ring, pe);
- radeon_ring_write(ring, upper_32_bits(pe));
- for (i = 0; i < count; ++i) {
- if (flags & RADEON_VM_PAGE_SYSTEM) {
- value = radeon_vm_map_gart(rdev, addr);
- value &= 0xFFFFFFFFFFFFF000ULL;
- } else if (flags & RADEON_VM_PAGE_VALID)
- value = addr;
- else
- value = 0;
- addr += incr;
- value |= r600_flags;
- radeon_ring_write(ring, value);
- radeon_ring_write(ring, upper_32_bits(value));
+ while (count) {
+ unsigned ndw = 2 + count * 2;
+ if (ndw > 0x3FFE)
+ ndw = 0x3FFE;
+
+ radeon_ring_write(ring, PACKET3(PACKET3_WRITE_DATA, ndw));
+ radeon_ring_write(ring, (WRITE_DATA_ENGINE_SEL(0) |
+ WRITE_DATA_DST_SEL(1)));
+ radeon_ring_write(ring, pe);
+ radeon_ring_write(ring, upper_32_bits(pe));
+ for (; ndw > 2; ndw -= 2, --count, pe += 8) {
+ uint64_t value;
+ if (flags & RADEON_VM_PAGE_SYSTEM) {
+ value = radeon_vm_map_gart(rdev, addr);
+ value &= 0xFFFFFFFFFFFFF000ULL;
+ } else if (flags & RADEON_VM_PAGE_VALID)
+ value = addr;
+ else
+ value = 0;
+ addr += incr;
+ value |= r600_flags;
+ radeon_ring_write(ring, value);
+ radeon_ring_write(ring, upper_32_bits(value));
+ }
}
}
@@ -2868,6 +2874,10 @@
radeon_ring_write(ring, VM_INVALIDATE_REQUEST >> 2);
radeon_ring_write(ring, 0);
radeon_ring_write(ring, 1 << vm->id);
+
+ /* sync PFP to ME, otherwise we might get invalid PFP reads */
+ radeon_ring_write(ring, PACKET3(PACKET3_PFP_SYNC_ME, 0));
+ radeon_ring_write(ring, 0x0);
}
/*
diff --git a/drivers/gpu/drm/radeon/sid.h b/drivers/gpu/drm/radeon/sid.h
index 7d2a20e..a8871af 100644
--- a/drivers/gpu/drm/radeon/sid.h
+++ b/drivers/gpu/drm/radeon/sid.h
@@ -424,6 +424,7 @@
# define RDERR_INT_ENABLE (1 << 0)
# define GUI_IDLE_INT_ENABLE (1 << 19)
+#define CP_STRMOUT_CNTL 0x84FC
#define SCRATCH_REG0 0x8500
#define SCRATCH_REG1 0x8504
#define SCRATCH_REG2 0x8508
diff --git a/drivers/gpu/drm/shmobile/shmob_drm_drv.c b/drivers/gpu/drm/shmobile/shmob_drm_drv.c
index c71d493..1c350fc 100644
--- a/drivers/gpu/drm/shmobile/shmob_drm_drv.c
+++ b/drivers/gpu/drm/shmobile/shmob_drm_drv.c
@@ -201,6 +201,8 @@
goto done;
}
+ platform_set_drvdata(pdev, sdev);
+
done:
if (ret)
shmob_drm_unload(dev);
@@ -299,11 +301,9 @@
#if CONFIG_PM_SLEEP
static int shmob_drm_pm_suspend(struct device *dev)
{
- struct platform_device *pdev = to_platform_device(dev);
- struct drm_device *ddev = platform_get_drvdata(pdev);
- struct shmob_drm_device *sdev = ddev->dev_private;
+ struct shmob_drm_device *sdev = dev_get_drvdata(dev);
- drm_kms_helper_poll_disable(ddev);
+ drm_kms_helper_poll_disable(sdev->ddev);
shmob_drm_crtc_suspend(&sdev->crtc);
return 0;
@@ -311,9 +311,7 @@
static int shmob_drm_pm_resume(struct device *dev)
{
- struct platform_device *pdev = to_platform_device(dev);
- struct drm_device *ddev = platform_get_drvdata(pdev);
- struct shmob_drm_device *sdev = ddev->dev_private;
+ struct shmob_drm_device *sdev = dev_get_drvdata(dev);
mutex_lock(&sdev->ddev->mode_config.mutex);
shmob_drm_crtc_resume(&sdev->crtc);
diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c
index 402ab69..bf6e4b5 100644
--- a/drivers/gpu/drm/ttm/ttm_bo.c
+++ b/drivers/gpu/drm/ttm/ttm_bo.c
@@ -580,6 +580,7 @@
if (unlikely(ret != 0))
return ret;
+retry_reserve:
spin_lock(&glob->lru_lock);
if (unlikely(list_empty(&bo->ddestroy))) {
@@ -587,14 +588,20 @@
return 0;
}
- ret = ttm_bo_reserve_locked(bo, interruptible,
- no_wait_reserve, false, 0);
+ ret = ttm_bo_reserve_locked(bo, false, true, false, 0);
- if (unlikely(ret != 0)) {
+ if (unlikely(ret == -EBUSY)) {
spin_unlock(&glob->lru_lock);
- return ret;
+ if (likely(!no_wait_reserve))
+ ret = ttm_bo_wait_unreserved(bo, interruptible);
+ if (unlikely(ret != 0))
+ return ret;
+
+ goto retry_reserve;
}
+ BUG_ON(ret != 0);
+
/**
* We can re-check for sync object without taking
* the bo::lock since setting the sync object requires
@@ -811,17 +818,14 @@
no_wait_reserve, no_wait_gpu);
kref_put(&bo->list_kref, ttm_bo_release_list);
- if (likely(ret == 0 || ret == -ERESTARTSYS))
- return ret;
-
- goto retry;
+ return ret;
}
- ret = ttm_bo_reserve_locked(bo, false, no_wait_reserve, false, 0);
+ ret = ttm_bo_reserve_locked(bo, false, true, false, 0);
if (unlikely(ret == -EBUSY)) {
spin_unlock(&glob->lru_lock);
- if (likely(!no_wait_gpu))
+ if (likely(!no_wait_reserve))
ret = ttm_bo_wait_unreserved(bo, interruptible);
kref_put(&bo->list_kref, ttm_bo_release_list);
diff --git a/drivers/gpu/drm/ttm/ttm_page_alloc.c b/drivers/gpu/drm/ttm/ttm_page_alloc.c
index 860dc48..bd2a3b4 100644
--- a/drivers/gpu/drm/ttm/ttm_page_alloc.c
+++ b/drivers/gpu/drm/ttm/ttm_page_alloc.c
@@ -749,7 +749,10 @@
/* clear the pages coming from the pool if requested */
if (flags & TTM_PAGE_FLAG_ZERO_ALLOC) {
list_for_each_entry(p, &plist, lru) {
- clear_page(page_address(p));
+ if (PageHighMem(p))
+ clear_highpage(p);
+ else
+ clear_page(page_address(p));
}
}
diff --git a/drivers/gpu/drm/ttm/ttm_tt.c b/drivers/gpu/drm/ttm/ttm_tt.c
index bf82601..7d759a4 100644
--- a/drivers/gpu/drm/ttm/ttm_tt.c
+++ b/drivers/gpu/drm/ttm/ttm_tt.c
@@ -308,9 +308,7 @@
if (unlikely(to_page == NULL))
goto out_err;
- preempt_disable();
copy_highpage(to_page, from_page);
- preempt_enable();
page_cache_release(from_page);
}
@@ -358,9 +356,7 @@
ret = PTR_ERR(to_page);
goto out_err;
}
- preempt_disable();
copy_highpage(to_page, from_page);
- preempt_enable();
set_page_dirty(to_page);
mark_page_accessed(to_page);
page_cache_release(to_page);
diff --git a/drivers/gpu/drm/udl/udl_drv.h b/drivers/gpu/drm/udl/udl_drv.h
index fccd361..87aa5f5 100644
--- a/drivers/gpu/drm/udl/udl_drv.h
+++ b/drivers/gpu/drm/udl/udl_drv.h
@@ -104,7 +104,7 @@
int udl_render_hline(struct drm_device *dev, int bpp, struct urb **urb_ptr,
const char *front, char **urb_buf_ptr,
- u32 byte_offset, u32 byte_width,
+ u32 byte_offset, u32 device_byte_offset, u32 byte_width,
int *ident_ptr, int *sent_ptr);
int udl_dumb_create(struct drm_file *file_priv,
diff --git a/drivers/gpu/drm/udl/udl_fb.c b/drivers/gpu/drm/udl/udl_fb.c
index 69a2b16..d4ab3be 100644
--- a/drivers/gpu/drm/udl/udl_fb.c
+++ b/drivers/gpu/drm/udl/udl_fb.c
@@ -114,9 +114,10 @@
list_for_each_entry(cur, &fbdefio->pagelist, lru) {
if (udl_render_hline(dev, (ufbdev->ufb.base.bits_per_pixel / 8),
- &urb, (char *) info->fix.smem_start,
- &cmd, cur->index << PAGE_SHIFT,
- PAGE_SIZE, &bytes_identical, &bytes_sent))
+ &urb, (char *) info->fix.smem_start,
+ &cmd, cur->index << PAGE_SHIFT,
+ cur->index << PAGE_SHIFT,
+ PAGE_SIZE, &bytes_identical, &bytes_sent))
goto error;
bytes_rendered += PAGE_SIZE;
}
@@ -187,10 +188,11 @@
for (i = y; i < y + height ; i++) {
const int line_offset = fb->base.pitches[0] * i;
const int byte_offset = line_offset + (x * bpp);
-
+ const int dev_byte_offset = (fb->base.width * bpp * i) + (x * bpp);
if (udl_render_hline(dev, bpp, &urb,
(char *) fb->obj->vmapping,
- &cmd, byte_offset, width * bpp,
+ &cmd, byte_offset, dev_byte_offset,
+ width * bpp,
&bytes_identical, &bytes_sent))
goto error;
}
diff --git a/drivers/gpu/drm/udl/udl_transfer.c b/drivers/gpu/drm/udl/udl_transfer.c
index dc09552..142fee5 100644
--- a/drivers/gpu/drm/udl/udl_transfer.c
+++ b/drivers/gpu/drm/udl/udl_transfer.c
@@ -213,11 +213,12 @@
*/
int udl_render_hline(struct drm_device *dev, int bpp, struct urb **urb_ptr,
const char *front, char **urb_buf_ptr,
- u32 byte_offset, u32 byte_width,
+ u32 byte_offset, u32 device_byte_offset,
+ u32 byte_width,
int *ident_ptr, int *sent_ptr)
{
const u8 *line_start, *line_end, *next_pixel;
- u32 base16 = 0 + (byte_offset / bpp) * 2;
+ u32 base16 = 0 + (device_byte_offset / bpp) * 2;
struct urb *urb = *urb_ptr;
u8 *cmd = *urb_buf_ptr;
u8 *cmd_end = (u8 *) urb->transfer_buffer + urb->transfer_buffer_length;
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_dmabuf.c b/drivers/gpu/drm/vmwgfx/vmwgfx_dmabuf.c
index 3ce68a2..d1498bf 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_dmabuf.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_dmabuf.c
@@ -306,7 +306,7 @@
BUG_ON(!atomic_read(&bo->reserved));
BUG_ON(old_mem_type != TTM_PL_VRAM &&
- old_mem_type != VMW_PL_FLAG_GMR);
+ old_mem_type != VMW_PL_GMR);
pl_flags = TTM_PL_FLAG_VRAM | VMW_PL_FLAG_GMR | TTM_PL_FLAG_CACHED;
if (pin)
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
index ed3c1e7..2dd185e 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
@@ -1098,6 +1098,11 @@
struct drm_device *dev = pci_get_drvdata(pdev);
struct vmw_private *dev_priv = vmw_priv(dev);
+ mutex_lock(&dev_priv->hw_mutex);
+ vmw_write(dev_priv, SVGA_REG_ID, SVGA_ID_2);
+ (void) vmw_read(dev_priv, SVGA_REG_ID);
+ mutex_unlock(&dev_priv->hw_mutex);
+
/**
* Reclaim 3d reference held by fbdev and potentially
* start fifo.
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c b/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c
index b07ca2e..7290811 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c
@@ -110,6 +110,8 @@
memcpy_fromio(bounce, &fifo_mem[SVGA_FIFO_3D_CAPS], size);
ret = copy_to_user(buffer, bounce, size);
+ if (ret)
+ ret = -EFAULT;
vfree(bounce);
if (unlikely(ret != 0))
diff --git a/drivers/hid/hid-apple.c b/drivers/hid/hid-apple.c
index 06ebdbb..fd7722a 100644
--- a/drivers/hid/hid-apple.c
+++ b/drivers/hid/hid-apple.c
@@ -522,6 +522,12 @@
.driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_JIS),
.driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_ANSI),
+ .driver_data = APPLE_HAS_FN },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_ISO),
+ .driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS),
+ .driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI),
.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO),
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index bd3971b..f4109fd 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1532,6 +1532,9 @@
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_ANSI) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_ISO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_JIS) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_ANSI) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_ISO) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_JIS) },
@@ -2139,6 +2142,9 @@
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_ANSI) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_ISO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_JIS) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_ANSI) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_ISO) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY) },
{ }
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 269b509..9d7a428 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -118,6 +118,9 @@
#define USB_DEVICE_ID_APPLE_WELLSPRING5A_ANSI 0x0252
#define USB_DEVICE_ID_APPLE_WELLSPRING5A_ISO 0x0253
#define USB_DEVICE_ID_APPLE_WELLSPRING5A_JIS 0x0254
+#define USB_DEVICE_ID_APPLE_WELLSPRING7A_ANSI 0x0259
+#define USB_DEVICE_ID_APPLE_WELLSPRING7A_ISO 0x025a
+#define USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS 0x025b
#define USB_DEVICE_ID_APPLE_WELLSPRING6A_ANSI 0x0249
#define USB_DEVICE_ID_APPLE_WELLSPRING6A_ISO 0x024a
#define USB_DEVICE_ID_APPLE_WELLSPRING6A_JIS 0x024b
diff --git a/drivers/hid/hid-microsoft.c b/drivers/hid/hid-microsoft.c
index 3acdcfc..6fcd466d0 100644
--- a/drivers/hid/hid-microsoft.c
+++ b/drivers/hid/hid-microsoft.c
@@ -28,22 +28,30 @@
#define MS_RDESC 0x08
#define MS_NOGET 0x10
#define MS_DUPLICATE_USAGES 0x20
+#define MS_RDESC_3K 0x40
-/*
- * Microsoft Wireless Desktop Receiver (Model 1028) has
- * 'Usage Min/Max' where it ought to have 'Physical Min/Max'
- */
static __u8 *ms_report_fixup(struct hid_device *hdev, __u8 *rdesc,
unsigned int *rsize)
{
unsigned long quirks = (unsigned long)hid_get_drvdata(hdev);
+ /*
+ * Microsoft Wireless Desktop Receiver (Model 1028) has
+ * 'Usage Min/Max' where it ought to have 'Physical Min/Max'
+ */
if ((quirks & MS_RDESC) && *rsize == 571 && rdesc[557] == 0x19 &&
rdesc[559] == 0x29) {
hid_info(hdev, "fixing up Microsoft Wireless Receiver Model 1028 report descriptor\n");
rdesc[557] = 0x35;
rdesc[559] = 0x45;
}
+ /* the same as above (s/usage/physical/) */
+ if ((quirks & MS_RDESC_3K) && *rsize == 106 && rdesc[94] == 0x19 &&
+ rdesc[95] == 0x00 && rdesc[96] == 0x29 &&
+ rdesc[97] == 0xff) {
+ rdesc[94] = 0x35;
+ rdesc[96] = 0x45;
+ }
return rdesc;
}
@@ -192,7 +200,7 @@
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_PRESENTER_8K_USB),
.driver_data = MS_PRESENTER },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_DIGITAL_MEDIA_3K),
- .driver_data = MS_ERGONOMY },
+ .driver_data = MS_ERGONOMY | MS_RDESC_3K },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_WIRELESS_OPTICAL_DESKTOP_3_0),
.driver_data = MS_NOGET },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_COMFORT_MOUSE_4500),
diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c
index 3eb02b9..7867d69 100644
--- a/drivers/hid/hid-multitouch.c
+++ b/drivers/hid/hid-multitouch.c
@@ -210,8 +210,7 @@
},
{ .name = MT_CLS_GENERALTOUCH_PWT_TENFINGERS,
.quirks = MT_QUIRK_NOT_SEEN_MEANS_UP |
- MT_QUIRK_SLOT_IS_CONTACTNUMBER,
- .maxcontacts = 10
+ MT_QUIRK_SLOT_IS_CONTACTNUMBER
},
{ .name = MT_CLS_FLATFROG,
@@ -421,11 +420,11 @@
* contact max are global to the report */
td->last_field_index = field->index;
return -1;
- }
case HID_DG_TOUCH:
/* Legacy devices use TIPSWITCH and not TOUCH.
* Let's just ignore this field. */
return -1;
+ }
/* let hid-input decide for the others */
return 0;
diff --git a/drivers/hid/hidraw.c b/drivers/hid/hidraw.c
index 17d15bb..7c47fc3 100644
--- a/drivers/hid/hidraw.c
+++ b/drivers/hid/hidraw.c
@@ -42,7 +42,6 @@
static struct class *hidraw_class;
static struct hidraw *hidraw_table[HIDRAW_MAX_DEVICES];
static DEFINE_MUTEX(minors_lock);
-static void drop_ref(struct hidraw *hid, int exists_bit);
static ssize_t hidraw_read(struct file *file, char __user *buffer, size_t count, loff_t *ppos)
{
@@ -114,7 +113,7 @@
__u8 *buf;
int ret = 0;
- if (!hidraw_table[minor] || !hidraw_table[minor]->exist) {
+ if (!hidraw_table[minor]) {
ret = -ENODEV;
goto out;
}
@@ -262,7 +261,7 @@
}
mutex_lock(&minors_lock);
- if (!hidraw_table[minor] || !hidraw_table[minor]->exist) {
+ if (!hidraw_table[minor]) {
err = -ENODEV;
goto out_unlock;
}
@@ -299,12 +298,36 @@
static int hidraw_release(struct inode * inode, struct file * file)
{
unsigned int minor = iminor(inode);
+ struct hidraw *dev;
struct hidraw_list *list = file->private_data;
+ int ret;
+ int i;
- drop_ref(hidraw_table[minor], 0);
+ mutex_lock(&minors_lock);
+ if (!hidraw_table[minor]) {
+ ret = -ENODEV;
+ goto unlock;
+ }
+
list_del(&list->node);
+ dev = hidraw_table[minor];
+ if (!--dev->open) {
+ if (list->hidraw->exist) {
+ hid_hw_power(dev->hid, PM_HINT_NORMAL);
+ hid_hw_close(dev->hid);
+ } else {
+ kfree(list->hidraw);
+ }
+ }
+
+ for (i = 0; i < HIDRAW_BUFFER_SIZE; ++i)
+ kfree(list->buffer[i].value);
kfree(list);
- return 0;
+ ret = 0;
+unlock:
+ mutex_unlock(&minors_lock);
+
+ return ret;
}
static long hidraw_ioctl(struct file *file, unsigned int cmd,
@@ -506,7 +529,21 @@
void hidraw_disconnect(struct hid_device *hid)
{
struct hidraw *hidraw = hid->hidraw;
- drop_ref(hidraw, 1);
+
+ mutex_lock(&minors_lock);
+ hidraw->exist = 0;
+
+ device_destroy(hidraw_class, MKDEV(hidraw_major, hidraw->minor));
+
+ hidraw_table[hidraw->minor] = NULL;
+
+ if (hidraw->open) {
+ hid_hw_close(hid);
+ wake_up_interruptible(&hidraw->wait);
+ } else {
+ kfree(hidraw);
+ }
+ mutex_unlock(&minors_lock);
}
EXPORT_SYMBOL_GPL(hidraw_disconnect);
@@ -555,23 +592,3 @@
unregister_chrdev_region(dev_id, HIDRAW_MAX_DEVICES);
}
-
-static void drop_ref(struct hidraw *hidraw, int exists_bit)
-{
- mutex_lock(&minors_lock);
- if (exists_bit) {
- hid_hw_close(hidraw->hid);
- hidraw->exist = 0;
- if (hidraw->open)
- wake_up_interruptible(&hidraw->wait);
- } else {
- --hidraw->open;
- }
-
- if (!hidraw->open && !hidraw->exist) {
- device_destroy(hidraw_class, MKDEV(hidraw_major, hidraw->minor));
- hidraw_table[hidraw->minor] = NULL;
- kfree(hidraw);
- }
- mutex_unlock(&minors_lock);
-}
diff --git a/drivers/hv/channel.c b/drivers/hv/channel.c
index 4065374..f4c3d28 100644
--- a/drivers/hv/channel.c
+++ b/drivers/hv/channel.c
@@ -146,14 +146,14 @@
if (ret != 0) {
err = ret;
- goto errorout;
+ goto error0;
}
ret = hv_ringbuffer_init(
&newchannel->inbound, in, recv_ringbuffer_size);
if (ret != 0) {
err = ret;
- goto errorout;
+ goto error0;
}
@@ -168,7 +168,7 @@
if (ret != 0) {
err = ret;
- goto errorout;
+ goto error0;
}
/* Create and init the channel open message */
@@ -177,7 +177,7 @@
GFP_KERNEL);
if (!open_info) {
err = -ENOMEM;
- goto errorout;
+ goto error0;
}
init_completion(&open_info->waitevent);
@@ -193,7 +193,7 @@
if (userdatalen > MAX_USER_DEFINED_BYTES) {
err = -EINVAL;
- goto errorout;
+ goto error0;
}
if (userdatalen)
@@ -208,19 +208,18 @@
sizeof(struct vmbus_channel_open_channel));
if (ret != 0)
- goto cleanup;
+ goto error1;
t = wait_for_completion_timeout(&open_info->waitevent, 5*HZ);
if (t == 0) {
err = -ETIMEDOUT;
- goto errorout;
+ goto error1;
}
if (open_info->response.open_result.status)
err = open_info->response.open_result.status;
-cleanup:
spin_lock_irqsave(&vmbus_connection.channelmsg_lock, flags);
list_del(&open_info->msglistentry);
spin_unlock_irqrestore(&vmbus_connection.channelmsg_lock, flags);
@@ -228,9 +227,12 @@
kfree(open_info);
return err;
-errorout:
- hv_ringbuffer_cleanup(&newchannel->outbound);
- hv_ringbuffer_cleanup(&newchannel->inbound);
+error1:
+ spin_lock_irqsave(&vmbus_connection.channelmsg_lock, flags);
+ list_del(&open_info->msglistentry);
+ spin_unlock_irqrestore(&vmbus_connection.channelmsg_lock, flags);
+
+error0:
free_pages((unsigned long)out,
get_order(send_ringbuffer_size + recv_ringbuffer_size));
kfree(open_info);
diff --git a/drivers/hwmon/asb100.c b/drivers/hwmon/asb100.c
index a227be4..520e5bf 100644
--- a/drivers/hwmon/asb100.c
+++ b/drivers/hwmon/asb100.c
@@ -32,7 +32,7 @@
* ASB100-A supports pwm1, while plain ASB100 does not. There is no known
* way for the driver to tell which one is there.
*
- * Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA
+ * Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA
* asb100 7 3 1 4 0x31 0x0694 yes no
*/
diff --git a/drivers/hwmon/fam15h_power.c b/drivers/hwmon/fam15h_power.c
index 68ad7d2..4f41104 100644
--- a/drivers/hwmon/fam15h_power.c
+++ b/drivers/hwmon/fam15h_power.c
@@ -2,7 +2,7 @@
* fam15h_power.c - AMD Family 15h processor power monitoring
*
* Copyright (c) 2011 Advanced Micro Devices, Inc.
- * Author: Andreas Herrmann <andreas.herrmann3@amd.com>
+ * Author: Andreas Herrmann <herrmann.der.user@googlemail.com>
*
*
* This driver is free software; you can redistribute it and/or
@@ -28,7 +28,7 @@
#include <asm/processor.h>
MODULE_DESCRIPTION("AMD Family 15h CPU processor power monitor");
-MODULE_AUTHOR("Andreas Herrmann <andreas.herrmann3@amd.com>");
+MODULE_AUTHOR("Andreas Herrmann <herrmann.der.user@googlemail.com>");
MODULE_LICENSE("GPL");
/* D18F3 */
diff --git a/drivers/hwmon/gpio-fan.c b/drivers/hwmon/gpio-fan.c
index 36509ae..1381a2e 100644
--- a/drivers/hwmon/gpio-fan.c
+++ b/drivers/hwmon/gpio-fan.c
@@ -630,7 +630,9 @@
.driver = {
.name = "gpio-fan",
.pm = GPIO_FAN_PM,
+#ifdef CONFIG_OF_GPIO
.of_match_table = of_match_ptr(of_gpio_fan_match),
+#endif
},
};
diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c
index 1821b74..de3c7e0 100644
--- a/drivers/hwmon/w83627ehf.c
+++ b/drivers/hwmon/w83627ehf.c
@@ -2083,6 +2083,7 @@
mutex_init(&data->lock);
mutex_init(&data->update_lock);
data->name = w83627ehf_device_names[sio_data->kind];
+ data->bank = 0xff; /* Force initial bank selection */
platform_set_drvdata(pdev, data);
/* 627EHG and 627EHF have 10 voltage inputs; 627DHG and 667HG have 9 */
diff --git a/drivers/hwmon/w83627hf.c b/drivers/hwmon/w83627hf.c
index 5b1a6a6..af15899 100644
--- a/drivers/hwmon/w83627hf.c
+++ b/drivers/hwmon/w83627hf.c
@@ -25,7 +25,7 @@
/*
* Supports following chips:
*
- * Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA
+ * Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA
* w83627hf 9 3 2 3 0x20 0x5ca3 no yes(LPC)
* w83627thf 7 3 3 3 0x90 0x5ca3 no yes(LPC)
* w83637hf 7 3 3 3 0x80 0x5ca3 no yes(LPC)
diff --git a/drivers/hwmon/w83781d.c b/drivers/hwmon/w83781d.c
index 5a5046d..20f11d3 100644
--- a/drivers/hwmon/w83781d.c
+++ b/drivers/hwmon/w83781d.c
@@ -24,7 +24,7 @@
/*
* Supports following chips:
*
- * Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA
+ * Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA
* as99127f 7 3 0 3 0x31 0x12c3 yes no
* as99127f rev.2 (type_name = as99127f) 0x31 0x5ca3 yes no
* w83781d 7 3 0 3 0x10-1 0x5ca3 yes yes
diff --git a/drivers/hwmon/w83791d.c b/drivers/hwmon/w83791d.c
index 39ab7bc..ed397c6 100644
--- a/drivers/hwmon/w83791d.c
+++ b/drivers/hwmon/w83791d.c
@@ -22,7 +22,7 @@
/*
* Supports following chips:
*
- * Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA
+ * Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA
* w83791d 10 5 5 3 0x71 0x5ca3 yes no
*
* The w83791d chip appears to be part way between the 83781d and the
diff --git a/drivers/hwmon/w83792d.c b/drivers/hwmon/w83792d.c
index 0536452..301942d 100644
--- a/drivers/hwmon/w83792d.c
+++ b/drivers/hwmon/w83792d.c
@@ -31,7 +31,7 @@
/*
* Supports following chips:
*
- * Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA
+ * Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA
* w83792d 9 7 7 3 0x7a 0x5ca3 yes no
*/
diff --git a/drivers/hwmon/w83l786ng.c b/drivers/hwmon/w83l786ng.c
index f0e8286..79710bc 100644
--- a/drivers/hwmon/w83l786ng.c
+++ b/drivers/hwmon/w83l786ng.c
@@ -20,7 +20,7 @@
/*
* Supports following chips:
*
- * Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA
+ * Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA
* w83l786ng 3 2 2 2 0x7b 0x5ca3 yes no
*/
diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
index beee6b2..1722f50 100644
--- a/drivers/i2c/Makefile
+++ b/drivers/i2c/Makefile
@@ -8,6 +8,7 @@
obj-$(CONFIG_I2C_CHARDEV) += i2c-dev.o
obj-$(CONFIG_I2C_MUX) += i2c-mux.o
obj-y += algos/ busses/ muxes/
+obj-$(CONFIG_I2C_STUB) += i2c-stub.o
ccflags-$(CONFIG_I2C_DEBUG_CORE) := -DDEBUG
CFLAGS_i2c-core.o := -Wno-deprecated-declarations
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 65dd599..e9df4612 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -81,7 +81,6 @@
tristate "Intel 82801 (ICH/PCH)"
depends on PCI
select CHECK_SIGNATURE if X86 && DMI
- select GPIOLIB if I2C_MUX
help
If you say yes to this option, support will be included for the Intel
801 family of mainboard I2C interfaces. Specifically, the following
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 2d33d62..395b516 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -85,7 +85,6 @@
obj-$(CONFIG_I2C_ELEKTOR) += i2c-elektor.o
obj-$(CONFIG_I2C_PCA_ISA) += i2c-pca-isa.o
obj-$(CONFIG_I2C_SIBYTE) += i2c-sibyte.o
-obj-$(CONFIG_I2C_STUB) += i2c-stub.o
obj-$(CONFIG_SCx200_ACB) += scx200_acb.o
obj-$(CONFIG_SCx200_I2C) += scx200_i2c.o
diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c
index aa59a25..c02bf20 100644
--- a/drivers/i2c/busses/i2c-at91.c
+++ b/drivers/i2c/busses/i2c-at91.c
@@ -39,6 +39,7 @@
#define AT91_TWI_STOP 0x0002 /* Send a Stop Condition */
#define AT91_TWI_MSEN 0x0004 /* Master Transfer Enable */
#define AT91_TWI_SVDIS 0x0020 /* Slave Transfer Disable */
+#define AT91_TWI_QUICK 0x0040 /* SMBus quick command */
#define AT91_TWI_SWRST 0x0080 /* Software Reset */
#define AT91_TWI_MMR 0x0004 /* Master Mode Register */
@@ -212,7 +213,11 @@
INIT_COMPLETION(dev->cmd_complete);
dev->transfer_status = 0;
- if (dev->msg->flags & I2C_M_RD) {
+
+ if (!dev->buf_len) {
+ at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_QUICK);
+ at91_twi_write(dev, AT91_TWI_IER, AT91_TWI_TXCOMP);
+ } else if (dev->msg->flags & I2C_M_RD) {
unsigned start_flags = AT91_TWI_START;
if (at91_twi_read(dev, AT91_TWI_SR) & AT91_TWI_RXRDY) {
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 3779315..6abc00d 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -82,7 +82,8 @@
#include <linux/wait.h>
#include <linux/err.h>
-#if defined CONFIG_I2C_MUX || defined CONFIG_I2C_MUX_MODULE
+#if (defined CONFIG_I2C_MUX_GPIO || defined CONFIG_I2C_MUX_GPIO_MODULE) && \
+ defined CONFIG_DMI
#include <linux/gpio.h>
#include <linux/i2c-mux-gpio.h>
#include <linux/platform_device.h>
@@ -192,7 +193,8 @@
int len;
u8 *data;
-#if defined CONFIG_I2C_MUX || defined CONFIG_I2C_MUX_MODULE
+#if (defined CONFIG_I2C_MUX_GPIO || defined CONFIG_I2C_MUX_GPIO_MODULE) && \
+ defined CONFIG_DMI
const struct i801_mux_config *mux_drvdata;
struct platform_device *mux_pdev;
#endif
@@ -921,7 +923,8 @@
static void __devinit i801_probe_optional_slaves(struct i801_priv *priv) {}
#endif /* CONFIG_X86 && CONFIG_DMI */
-#if defined CONFIG_I2C_MUX || defined CONFIG_I2C_MUX_MODULE
+#if (defined CONFIG_I2C_MUX_GPIO || defined CONFIG_I2C_MUX_GPIO_MODULE) && \
+ defined CONFIG_DMI
static struct i801_mux_config i801_mux_config_asus_z8_d12 = {
.gpio_chip = "gpio_ich",
.values = { 0x02, 0x03 },
@@ -1059,7 +1062,7 @@
id = dmi_first_match(mux_dmi_table);
if (id) {
- /* Remove from branch classes from trunk */
+ /* Remove branch classes from trunk */
mux_config = id->driver_data;
for (i = 0; i < mux_config->n_values; i++)
class &= ~mux_config->classes[i];
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index 2ef162d..b973474 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -52,8 +52,6 @@
#include <linux/of_device.h>
#include <linux/of_i2c.h>
#include <linux/pinctrl/consumer.h>
-
-#include <mach/hardware.h>
#include <linux/platform_data/i2c-imx.h>
/** Defines ********************************************************************
@@ -115,6 +113,11 @@
{ 3072, 0x1E }, { 3840, 0x1F }
};
+enum imx_i2c_type {
+ IMX1_I2C,
+ IMX21_I2C,
+};
+
struct imx_i2c_struct {
struct i2c_adapter adapter;
struct clk *clk;
@@ -124,13 +127,33 @@
unsigned int disable_delay;
int stopped;
unsigned int ifdr; /* IMX_I2C_IFDR */
+ enum imx_i2c_type devtype;
};
+static struct platform_device_id imx_i2c_devtype[] = {
+ {
+ .name = "imx1-i2c",
+ .driver_data = IMX1_I2C,
+ }, {
+ .name = "imx21-i2c",
+ .driver_data = IMX21_I2C,
+ }, {
+ /* sentinel */
+ }
+};
+MODULE_DEVICE_TABLE(platform, imx_i2c_devtype);
+
static const struct of_device_id i2c_imx_dt_ids[] = {
- { .compatible = "fsl,imx1-i2c", },
+ { .compatible = "fsl,imx1-i2c", .data = &imx_i2c_devtype[IMX1_I2C], },
+ { .compatible = "fsl,imx21-i2c", .data = &imx_i2c_devtype[IMX21_I2C], },
{ /* sentinel */ }
};
+static inline int is_imx1_i2c(struct imx_i2c_struct *i2c_imx)
+{
+ return i2c_imx->devtype == IMX1_I2C;
+}
+
/** Functions for IMX I2C adapter driver ***************************************
*******************************************************************************/
@@ -223,7 +246,7 @@
temp &= ~(I2CR_MSTA | I2CR_MTX);
writeb(temp, i2c_imx->base + IMX_I2C_I2CR);
}
- if (cpu_is_mx1()) {
+ if (is_imx1_i2c(i2c_imx)) {
/*
* This delay caused by an i.MXL hardware bug.
* If no (or too short) delay, no "STOP" bit will be generated.
@@ -465,6 +488,8 @@
static int __init i2c_imx_probe(struct platform_device *pdev)
{
+ const struct of_device_id *of_id = of_match_device(i2c_imx_dt_ids,
+ &pdev->dev);
struct imx_i2c_struct *i2c_imx;
struct resource *res;
struct imxi2c_platform_data *pdata = pdev->dev.platform_data;
@@ -497,6 +522,10 @@
return -ENOMEM;
}
+ if (of_id)
+ pdev->id_entry = of_id->data;
+ i2c_imx->devtype = pdev->id_entry->driver_data;
+
/* Setup i2c_imx driver structure */
strlcpy(i2c_imx->adapter.name, pdev->name, sizeof(i2c_imx->adapter.name));
i2c_imx->adapter.owner = THIS_MODULE;
@@ -593,7 +622,8 @@
.name = DRIVER_NAME,
.owner = THIS_MODULE,
.of_match_table = i2c_imx_dt_ids,
- }
+ },
+ .id_table = imx_i2c_devtype,
};
static int __init i2c_adap_imx_init(void)
diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c
index 1f58197..0670da7 100644
--- a/drivers/i2c/busses/i2c-mxs.c
+++ b/drivers/i2c/busses/i2c-mxs.c
@@ -1,7 +1,7 @@
/*
* Freescale MXS I2C bus driver
*
- * Copyright (C) 2011 Wolfram Sang, Pengutronix e.K.
+ * Copyright (C) 2011-2012 Wolfram Sang, Pengutronix e.K.
*
* based on a (non-working) driver which was:
*
@@ -35,10 +35,6 @@
#define DRIVER_NAME "mxs-i2c"
-static bool use_pioqueue;
-module_param(use_pioqueue, bool, 0);
-MODULE_PARM_DESC(use_pioqueue, "Use PIOQUEUE mode for transfer instead of DMA");
-
#define MXS_I2C_CTRL0 (0x00)
#define MXS_I2C_CTRL0_SET (0x04)
@@ -75,23 +71,6 @@
MXS_I2C_CTRL1_SLAVE_STOP_IRQ | \
MXS_I2C_CTRL1_SLAVE_IRQ)
-#define MXS_I2C_QUEUECTRL (0x60)
-#define MXS_I2C_QUEUECTRL_SET (0x64)
-#define MXS_I2C_QUEUECTRL_CLR (0x68)
-
-#define MXS_I2C_QUEUECTRL_QUEUE_RUN 0x20
-#define MXS_I2C_QUEUECTRL_PIO_QUEUE_MODE 0x04
-
-#define MXS_I2C_QUEUESTAT (0x70)
-#define MXS_I2C_QUEUESTAT_RD_QUEUE_EMPTY 0x00002000
-#define MXS_I2C_QUEUESTAT_WRITE_QUEUE_CNT_MASK 0x0000001F
-
-#define MXS_I2C_QUEUECMD (0x80)
-
-#define MXS_I2C_QUEUEDATA (0x90)
-
-#define MXS_I2C_DATA (0xa0)
-
#define MXS_CMD_I2C_SELECT (MXS_I2C_CTRL0_RETAIN_CLOCK | \
MXS_I2C_CTRL0_PRE_SEND_START | \
@@ -153,7 +132,6 @@
const struct mxs_i2c_speed_config *speed;
/* DMA support components */
- bool dma_mode;
int dma_channel;
struct dma_chan *dmach;
struct mxs_dma_data dma_data;
@@ -172,99 +150,6 @@
writel(i2c->speed->timing2, i2c->regs + MXS_I2C_TIMING2);
writel(MXS_I2C_IRQ_MASK << 8, i2c->regs + MXS_I2C_CTRL1_SET);
- if (i2c->dma_mode)
- writel(MXS_I2C_QUEUECTRL_PIO_QUEUE_MODE,
- i2c->regs + MXS_I2C_QUEUECTRL_CLR);
- else
- writel(MXS_I2C_QUEUECTRL_PIO_QUEUE_MODE,
- i2c->regs + MXS_I2C_QUEUECTRL_SET);
-}
-
-static void mxs_i2c_pioq_setup_read(struct mxs_i2c_dev *i2c, u8 addr, int len,
- int flags)
-{
- u32 data;
-
- writel(MXS_CMD_I2C_SELECT, i2c->regs + MXS_I2C_QUEUECMD);
-
- data = (addr << 1) | I2C_SMBUS_READ;
- writel(data, i2c->regs + MXS_I2C_DATA);
-
- data = MXS_CMD_I2C_READ | MXS_I2C_CTRL0_XFER_COUNT(len) | flags;
- writel(data, i2c->regs + MXS_I2C_QUEUECMD);
-}
-
-static void mxs_i2c_pioq_setup_write(struct mxs_i2c_dev *i2c,
- u8 addr, u8 *buf, int len, int flags)
-{
- u32 data;
- int i, shifts_left;
-
- data = MXS_CMD_I2C_WRITE | MXS_I2C_CTRL0_XFER_COUNT(len + 1) | flags;
- writel(data, i2c->regs + MXS_I2C_QUEUECMD);
-
- /*
- * We have to copy the slave address (u8) and buffer (arbitrary number
- * of u8) into the data register (u32). To achieve that, the u8 are put
- * into the MSBs of 'data' which is then shifted for the next u8. When
- * appropriate, 'data' is written to MXS_I2C_DATA. So, the first u32
- * looks like this:
- *
- * 3 2 1 0
- * 10987654|32109876|54321098|76543210
- * --------+--------+--------+--------
- * buffer+2|buffer+1|buffer+0|slave_addr
- */
-
- data = ((addr << 1) | I2C_SMBUS_WRITE) << 24;
-
- for (i = 0; i < len; i++) {
- data >>= 8;
- data |= buf[i] << 24;
- if ((i & 3) == 2)
- writel(data, i2c->regs + MXS_I2C_DATA);
- }
-
- /* Write out the remaining bytes if any */
- shifts_left = 24 - (i & 3) * 8;
- if (shifts_left)
- writel(data >> shifts_left, i2c->regs + MXS_I2C_DATA);
-}
-
-/*
- * TODO: should be replaceable with a waitqueue and RD_QUEUE_IRQ (setting the
- * rd_threshold to 1). Couldn't get this to work, though.
- */
-static int mxs_i2c_wait_for_data(struct mxs_i2c_dev *i2c)
-{
- unsigned long timeout = jiffies + msecs_to_jiffies(1000);
-
- while (readl(i2c->regs + MXS_I2C_QUEUESTAT)
- & MXS_I2C_QUEUESTAT_RD_QUEUE_EMPTY) {
- if (time_after(jiffies, timeout))
- return -ETIMEDOUT;
- cond_resched();
- }
-
- return 0;
-}
-
-static int mxs_i2c_finish_read(struct mxs_i2c_dev *i2c, u8 *buf, int len)
-{
- u32 uninitialized_var(data);
- int i;
-
- for (i = 0; i < len; i++) {
- if ((i & 3) == 0) {
- if (mxs_i2c_wait_for_data(i2c))
- return -ETIMEDOUT;
- data = readl(i2c->regs + MXS_I2C_QUEUEDATA);
- }
- buf[i] = data & 0xff;
- data >>= 8;
- }
-
- return 0;
}
static void mxs_i2c_dma_finish(struct mxs_i2c_dev *i2c)
@@ -402,12 +287,14 @@
select_init_dma_fail:
dma_unmap_sg(i2c->dev, &i2c->sg_io[0], 1, DMA_TO_DEVICE);
select_init_pio_fail:
+ dmaengine_terminate_all(i2c->dmach);
return -EINVAL;
/* Write failpath. */
write_init_dma_fail:
dma_unmap_sg(i2c->dev, i2c->sg_io, 2, DMA_TO_DEVICE);
write_init_pio_fail:
+ dmaengine_terminate_all(i2c->dmach);
return -EINVAL;
}
@@ -432,39 +319,17 @@
init_completion(&i2c->cmd_complete);
i2c->cmd_err = 0;
- if (i2c->dma_mode) {
- ret = mxs_i2c_dma_setup_xfer(adap, msg, flags);
- if (ret)
- return ret;
- } else {
- if (msg->flags & I2C_M_RD) {
- mxs_i2c_pioq_setup_read(i2c, msg->addr,
- msg->len, flags);
- } else {
- mxs_i2c_pioq_setup_write(i2c, msg->addr, msg->buf,
- msg->len, flags);
- }
-
- writel(MXS_I2C_QUEUECTRL_QUEUE_RUN,
- i2c->regs + MXS_I2C_QUEUECTRL_SET);
- }
+ ret = mxs_i2c_dma_setup_xfer(adap, msg, flags);
+ if (ret)
+ return ret;
ret = wait_for_completion_timeout(&i2c->cmd_complete,
msecs_to_jiffies(1000));
if (ret == 0)
goto timeout;
- if (!i2c->dma_mode && !i2c->cmd_err && (msg->flags & I2C_M_RD)) {
- ret = mxs_i2c_finish_read(i2c, msg->buf, msg->len);
- if (ret)
- goto timeout;
- }
-
if (i2c->cmd_err == -ENXIO)
mxs_i2c_reset(i2c);
- else
- writel(MXS_I2C_QUEUECTRL_QUEUE_RUN,
- i2c->regs + MXS_I2C_QUEUECTRL_CLR);
dev_dbg(i2c->dev, "Done with err=%d\n", i2c->cmd_err);
@@ -472,8 +337,7 @@
timeout:
dev_dbg(i2c->dev, "Timeout!\n");
- if (i2c->dma_mode)
- mxs_i2c_dma_finish(i2c);
+ mxs_i2c_dma_finish(i2c);
mxs_i2c_reset(i2c);
return -ETIMEDOUT;
}
@@ -502,7 +366,6 @@
{
struct mxs_i2c_dev *i2c = dev_id;
u32 stat = readl(i2c->regs + MXS_I2C_CTRL1) & MXS_I2C_IRQ_MASK;
- bool is_last_cmd;
if (!stat)
return IRQ_NONE;
@@ -515,14 +378,6 @@
/* MXS_I2C_CTRL1_OVERSIZE_XFER_TERM_IRQ is only for slaves */
i2c->cmd_err = -EIO;
- if (!i2c->dma_mode) {
- is_last_cmd = (readl(i2c->regs + MXS_I2C_QUEUESTAT) &
- MXS_I2C_QUEUESTAT_WRITE_QUEUE_CNT_MASK) == 0;
-
- if (is_last_cmd || i2c->cmd_err)
- complete(&i2c->cmd_complete);
- }
-
writel(stat, i2c->regs + MXS_I2C_CTRL1_CLR);
return IRQ_HANDLED;
@@ -556,23 +411,14 @@
int ret;
/*
- * The MXS I2C DMA mode is prefered and enabled by default.
- * The PIO mode is still supported, but should be used only
- * for debuging purposes etc.
- */
- i2c->dma_mode = !use_pioqueue;
- if (!i2c->dma_mode)
- dev_info(dev, "Using PIOQUEUE mode for I2C transfers!\n");
-
- /*
* TODO: This is a temporary solution and should be changed
* to use generic DMA binding later when the helpers get in.
*/
ret = of_property_read_u32(node, "fsl,i2c-dma-channel",
&i2c->dma_channel);
if (ret) {
- dev_warn(dev, "Failed to get DMA channel, using PIOQUEUE!\n");
- i2c->dma_mode = 0;
+ dev_err(dev, "Failed to get DMA channel!\n");
+ return -ENODEV;
}
ret = of_property_read_u32(node, "clock-frequency", &speed);
@@ -634,15 +480,13 @@
}
/* Setup the DMA */
- if (i2c->dma_mode) {
- dma_cap_zero(mask);
- dma_cap_set(DMA_SLAVE, mask);
- i2c->dma_data.chan_irq = dmairq;
- i2c->dmach = dma_request_channel(mask, mxs_i2c_dma_filter, i2c);
- if (!i2c->dmach) {
- dev_err(dev, "Failed to request dma\n");
- return -ENODEV;
- }
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_SLAVE, mask);
+ i2c->dma_data.chan_irq = dmairq;
+ i2c->dmach = dma_request_channel(mask, mxs_i2c_dma_filter, i2c);
+ if (!i2c->dmach) {
+ dev_err(dev, "Failed to request dma\n");
+ return -ENODEV;
}
platform_set_drvdata(pdev, i2c);
diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c
index 698d7ac..02c3115 100644
--- a/drivers/i2c/busses/i2c-nomadik.c
+++ b/drivers/i2c/busses/i2c-nomadik.c
@@ -644,7 +644,11 @@
pm_runtime_get_sync(&dev->adev->dev);
- clk_enable(dev->clk);
+ status = clk_prepare_enable(dev->clk);
+ if (status) {
+ dev_err(&dev->adev->dev, "can't prepare_enable clock\n");
+ goto out_clk;
+ }
status = init_hw(dev);
if (status)
@@ -671,7 +675,8 @@
}
out:
- clk_disable(dev->clk);
+ clk_disable_unprepare(dev->clk);
+out_clk:
pm_runtime_put_sync(&dev->adev->dev);
dev->busy = false;
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index db31eae..3525c9e 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -43,7 +43,6 @@
#include <linux/slab.h>
#include <linux/i2c-omap.h>
#include <linux/pm_runtime.h>
-#include <linux/pm_qos.h>
/* I2C controller revisions */
#define OMAP_I2C_OMAP1_REV_2 0x20
@@ -187,8 +186,9 @@
int reg_shift; /* bit shift for I2C register addresses */
struct completion cmd_complete;
struct resource *ioarea;
- u32 latency; /* maximum MPU wkup latency */
- struct pm_qos_request pm_qos_request;
+ u32 latency; /* maximum mpu wkup latency */
+ void (*set_mpu_wkup_lat)(struct device *dev,
+ long latency);
u32 speed; /* Speed of bus in kHz */
u32 dtrev; /* extra revision from DT */
u32 flags;
@@ -494,7 +494,9 @@
dev->b_hw = 1; /* Enable hardware fixes */
/* calculate wakeup latency constraint for MPU */
- dev->latency = (1000000 * dev->threshold) / (1000 * dev->speed / 8);
+ if (dev->set_mpu_wkup_lat != NULL)
+ dev->latency = (1000000 * dev->threshold) /
+ (1000 * dev->speed / 8);
}
/*
@@ -522,6 +524,9 @@
dev->buf = msg->buf;
dev->buf_len = msg->len;
+ /* make sure writes to dev->buf_len are ordered */
+ barrier();
+
omap_i2c_write_reg(dev, OMAP_I2C_CNT_REG, dev->buf_len);
/* Clear the FIFO Buffers */
@@ -579,7 +584,6 @@
*/
timeout = wait_for_completion_timeout(&dev->cmd_complete,
OMAP_I2C_TIMEOUT);
- dev->buf_len = 0;
if (timeout == 0) {
dev_err(dev->dev, "controller timed out\n");
omap_i2c_init(dev);
@@ -629,16 +633,8 @@
if (r < 0)
goto out;
- /*
- * When waiting for completion of a i2c transfer, we need to
- * set a wake up latency constraint for the MPU. This is to
- * ensure quick enough wakeup from idle, when transfer
- * completes.
- */
- if (dev->latency)
- pm_qos_add_request(&dev->pm_qos_request,
- PM_QOS_CPU_DMA_LATENCY,
- dev->latency);
+ if (dev->set_mpu_wkup_lat != NULL)
+ dev->set_mpu_wkup_lat(dev->dev, dev->latency);
for (i = 0; i < num; i++) {
r = omap_i2c_xfer_msg(adap, &msgs[i], (i == (num - 1)));
@@ -646,8 +642,8 @@
break;
}
- if (dev->latency)
- pm_qos_remove_request(&dev->pm_qos_request);
+ if (dev->set_mpu_wkup_lat != NULL)
+ dev->set_mpu_wkup_lat(dev->dev, -1);
if (r == 0)
r = num;
@@ -1104,6 +1100,7 @@
} else if (pdata != NULL) {
dev->speed = pdata->clkrate;
dev->flags = pdata->flags;
+ dev->set_mpu_wkup_lat = pdata->set_mpu_wkup_lat;
dev->dtrev = pdata->rev;
}
@@ -1159,8 +1156,9 @@
dev->b_hw = 1; /* Enable hardware fixes */
/* calculate wakeup latency constraint for MPU */
- dev->latency = (1000000 * dev->fifo_size) /
- (1000 * dev->speed / 8);
+ if (dev->set_mpu_wkup_lat != NULL)
+ dev->latency = (1000000 * dev->fifo_size) /
+ (1000 * dev->speed / 8);
}
/* reset ASAP, clearing any IRQs */
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 3e0335f1..9d90272 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -806,6 +806,7 @@
dev_err(i2c->dev, "invalid gpio[%d]: %d\n", idx, gpio);
goto free_gpio;
}
+ i2c->gpios[idx] = gpio;
ret = gpio_request(gpio, "i2c-bus");
if (ret) {
diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index f981ac4..dcea77b 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -742,7 +742,7 @@
}
ret = devm_request_irq(&pdev->dev, i2c_dev->irq,
- tegra_i2c_isr, 0, pdev->name, i2c_dev);
+ tegra_i2c_isr, 0, dev_name(&pdev->dev), i2c_dev);
if (ret) {
dev_err(&pdev->dev, "Failed to request irq %i\n", i2c_dev->irq);
return ret;
diff --git a/drivers/i2c/busses/i2c-stub.c b/drivers/i2c/i2c-stub.c
similarity index 75%
rename from drivers/i2c/busses/i2c-stub.c
rename to drivers/i2c/i2c-stub.c
index b1b34479..d0a9c59 100644
--- a/drivers/i2c/busses/i2c-stub.c
+++ b/drivers/i2c/i2c-stub.c
@@ -2,7 +2,7 @@
i2c-stub.c - I2C/SMBus chip emulator
Copyright (c) 2004 Mark M. Hoffman <mhoffman@lightlink.com>
- Copyright (C) 2007 Jean Delvare <khali@linux-fr.org>
+ Copyright (C) 2007, 2012 Jean Delvare <khali@linux-fr.org>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
@@ -51,8 +51,8 @@
static struct stub_chip *stub_chips;
/* Return negative errno on error. */
-static s32 stub_xfer(struct i2c_adapter * adap, u16 addr, unsigned short flags,
- char read_write, u8 command, int size, union i2c_smbus_data * data)
+static s32 stub_xfer(struct i2c_adapter *adap, u16 addr, unsigned short flags,
+ char read_write, u8 command, int size, union i2c_smbus_data *data)
{
s32 ret;
int i, len;
@@ -78,14 +78,14 @@
case I2C_SMBUS_BYTE:
if (read_write == I2C_SMBUS_WRITE) {
chip->pointer = command;
- dev_dbg(&adap->dev, "smbus byte - addr 0x%02x, "
- "wrote 0x%02x.\n",
- addr, command);
+ dev_dbg(&adap->dev,
+ "smbus byte - addr 0x%02x, wrote 0x%02x.\n",
+ addr, command);
} else {
data->byte = chip->words[chip->pointer++] & 0xff;
- dev_dbg(&adap->dev, "smbus byte - addr 0x%02x, "
- "read 0x%02x.\n",
- addr, data->byte);
+ dev_dbg(&adap->dev,
+ "smbus byte - addr 0x%02x, read 0x%02x.\n",
+ addr, data->byte);
}
ret = 0;
@@ -95,14 +95,14 @@
if (read_write == I2C_SMBUS_WRITE) {
chip->words[command] &= 0xff00;
chip->words[command] |= data->byte;
- dev_dbg(&adap->dev, "smbus byte data - addr 0x%02x, "
- "wrote 0x%02x at 0x%02x.\n",
- addr, data->byte, command);
+ dev_dbg(&adap->dev,
+ "smbus byte data - addr 0x%02x, wrote 0x%02x at 0x%02x.\n",
+ addr, data->byte, command);
} else {
data->byte = chip->words[command] & 0xff;
- dev_dbg(&adap->dev, "smbus byte data - addr 0x%02x, "
- "read 0x%02x at 0x%02x.\n",
- addr, data->byte, command);
+ dev_dbg(&adap->dev,
+ "smbus byte data - addr 0x%02x, read 0x%02x at 0x%02x.\n",
+ addr, data->byte, command);
}
chip->pointer = command + 1;
@@ -112,14 +112,14 @@
case I2C_SMBUS_WORD_DATA:
if (read_write == I2C_SMBUS_WRITE) {
chip->words[command] = data->word;
- dev_dbg(&adap->dev, "smbus word data - addr 0x%02x, "
- "wrote 0x%04x at 0x%02x.\n",
- addr, data->word, command);
+ dev_dbg(&adap->dev,
+ "smbus word data - addr 0x%02x, wrote 0x%04x at 0x%02x.\n",
+ addr, data->word, command);
} else {
data->word = chip->words[command];
- dev_dbg(&adap->dev, "smbus word data - addr 0x%02x, "
- "read 0x%04x at 0x%02x.\n",
- addr, data->word, command);
+ dev_dbg(&adap->dev,
+ "smbus word data - addr 0x%02x, read 0x%04x at 0x%02x.\n",
+ addr, data->word, command);
}
ret = 0;
@@ -132,17 +132,17 @@
chip->words[command + i] &= 0xff00;
chip->words[command + i] |= data->block[1 + i];
}
- dev_dbg(&adap->dev, "i2c block data - addr 0x%02x, "
- "wrote %d bytes at 0x%02x.\n",
- addr, len, command);
+ dev_dbg(&adap->dev,
+ "i2c block data - addr 0x%02x, wrote %d bytes at 0x%02x.\n",
+ addr, len, command);
} else {
for (i = 0; i < len; i++) {
data->block[1 + i] =
chip->words[command + i] & 0xff;
}
- dev_dbg(&adap->dev, "i2c block data - addr 0x%02x, "
- "read %d bytes at 0x%02x.\n",
- addr, len, command);
+ dev_dbg(&adap->dev,
+ "i2c block data - addr 0x%02x, read %d bytes at 0x%02x.\n",
+ addr, len, command);
}
ret = 0;
@@ -179,25 +179,24 @@
int i, ret;
if (!chip_addr[0]) {
- printk(KERN_ERR "i2c-stub: Please specify a chip address\n");
+ pr_err("i2c-stub: Please specify a chip address\n");
return -ENODEV;
}
for (i = 0; i < MAX_CHIPS && chip_addr[i]; i++) {
if (chip_addr[i] < 0x03 || chip_addr[i] > 0x77) {
- printk(KERN_ERR "i2c-stub: Invalid chip address "
- "0x%02x\n", chip_addr[i]);
+ pr_err("i2c-stub: Invalid chip address 0x%02x\n",
+ chip_addr[i]);
return -EINVAL;
}
- printk(KERN_INFO "i2c-stub: Virtual chip at 0x%02x\n",
- chip_addr[i]);
+ pr_info("i2c-stub: Virtual chip at 0x%02x\n", chip_addr[i]);
}
/* Allocate memory for all chips at once */
stub_chips = kzalloc(i * sizeof(struct stub_chip), GFP_KERNEL);
if (!stub_chips) {
- printk(KERN_ERR "i2c-stub: Out of memory\n");
+ pr_err("i2c-stub: Out of memory\n");
return -ENOMEM;
}
@@ -219,4 +218,3 @@
module_init(i2c_stub_init);
module_exit(i2c_stub_exit);
-
diff --git a/drivers/i2c/muxes/i2c-mux-pinctrl.c b/drivers/i2c/muxes/i2c-mux-pinctrl.c
index 5f097f3..7fa5b24 100644
--- a/drivers/i2c/muxes/i2c-mux-pinctrl.c
+++ b/drivers/i2c/muxes/i2c-mux-pinctrl.c
@@ -169,7 +169,7 @@
mux->busses = devm_kzalloc(&pdev->dev,
sizeof(mux->busses) * mux->pdata->bus_count,
GFP_KERNEL);
- if (!mux->states) {
+ if (!mux->busses) {
dev_err(&pdev->dev, "Cannot allocate busses\n");
ret = -ENOMEM;
goto err;
diff --git a/drivers/iio/Kconfig b/drivers/iio/Kconfig
index 6e3f143..fc937ac 100644
--- a/drivers/iio/Kconfig
+++ b/drivers/iio/Kconfig
@@ -62,7 +62,6 @@
source "drivers/iio/dac/Kconfig"
source "drivers/iio/common/Kconfig"
source "drivers/iio/gyro/Kconfig"
-source "drivers/iio/light/Kconfig"
source "drivers/iio/magnetometer/Kconfig"
endif # IIO
diff --git a/drivers/iio/Makefile b/drivers/iio/Makefile
index f7fa3c0..761f2b6 100644
--- a/drivers/iio/Makefile
+++ b/drivers/iio/Makefile
@@ -18,5 +18,4 @@
obj-y += dac/
obj-y += common/
obj-y += gyro/
-obj-y += light/
obj-y += magnetometer/
diff --git a/drivers/infiniband/hw/cxgb4/mem.c b/drivers/infiniband/hw/cxgb4/mem.c
index 57e07c6..afd8179 100644
--- a/drivers/infiniband/hw/cxgb4/mem.c
+++ b/drivers/infiniband/hw/cxgb4/mem.c
@@ -468,7 +468,7 @@
ret = alloc_pbl(mhp, npages);
if (ret) {
kfree(page_list);
- goto err_pbl;
+ goto err;
}
ret = write_pbl(&mhp->rhp->rdev, page_list, mhp->attr.pbl_addr,
diff --git a/drivers/infiniband/hw/mlx4/alias_GUID.c b/drivers/infiniband/hw/mlx4/alias_GUID.c
index d2fb38d..2f215b9 100644
--- a/drivers/infiniband/hw/mlx4/alias_GUID.c
+++ b/drivers/infiniband/hw/mlx4/alias_GUID.c
@@ -107,7 +107,7 @@
{
if (index >= NUM_ALIAS_GUID_PER_PORT) {
pr_err("%s: ERROR: asked for index:%d\n", __func__, index);
- return (__force __be64) ((u64) 0xFFFFFFFFFFFFFFFFUL);
+ return (__force __be64) -1;
}
return *(__be64 *)&dev->sriov.demux[port - 1].guid_cache[index];
}
diff --git a/drivers/infiniband/hw/mlx4/mad.c b/drivers/infiniband/hw/mlx4/mad.c
index 21a7941..0a903c1 100644
--- a/drivers/infiniband/hw/mlx4/mad.c
+++ b/drivers/infiniband/hw/mlx4/mad.c
@@ -409,38 +409,45 @@
}
-static int get_pkey_phys_indices(struct mlx4_ib_dev *ibdev, u8 port, u8 ph_pkey_ix,
- u8 *full_pk_ix, u8 *partial_pk_ix,
- int *is_full_member)
+static int find_slave_port_pkey_ix(struct mlx4_ib_dev *dev, int slave,
+ u8 port, u16 pkey, u16 *ix)
{
- u16 search_pkey;
- int fm;
- int err = 0;
- u16 pk;
+ int i, ret;
+ u8 unassigned_pkey_ix, pkey_ix, partial_ix = 0xFF;
+ u16 slot_pkey;
- err = ib_get_cached_pkey(&ibdev->ib_dev, port, ph_pkey_ix, &search_pkey);
- if (err)
- return err;
+ if (slave == mlx4_master_func_num(dev->dev))
+ return ib_find_cached_pkey(&dev->ib_dev, port, pkey, ix);
- fm = (search_pkey & 0x8000) ? 1 : 0;
- if (fm) {
- *full_pk_ix = ph_pkey_ix;
- search_pkey &= 0x7FFF;
- } else {
- *partial_pk_ix = ph_pkey_ix;
- search_pkey |= 0x8000;
+ unassigned_pkey_ix = dev->dev->phys_caps.pkey_phys_table_len[port] - 1;
+
+ for (i = 0; i < dev->dev->caps.pkey_table_len[port]; i++) {
+ if (dev->pkeys.virt2phys_pkey[slave][port - 1][i] == unassigned_pkey_ix)
+ continue;
+
+ pkey_ix = dev->pkeys.virt2phys_pkey[slave][port - 1][i];
+
+ ret = ib_get_cached_pkey(&dev->ib_dev, port, pkey_ix, &slot_pkey);
+ if (ret)
+ continue;
+ if ((slot_pkey & 0x7FFF) == (pkey & 0x7FFF)) {
+ if (slot_pkey & 0x8000) {
+ *ix = (u16) pkey_ix;
+ return 0;
+ } else {
+ /* take first partial pkey index found */
+ if (partial_ix == 0xFF)
+ partial_ix = pkey_ix;
+ }
+ }
}
- if (ib_find_exact_cached_pkey(&ibdev->ib_dev, port, search_pkey, &pk))
- pk = 0xFFFF;
+ if (partial_ix < 0xFF) {
+ *ix = (u16) partial_ix;
+ return 0;
+ }
- if (fm)
- *partial_pk_ix = (pk & 0xFF);
- else
- *full_pk_ix = (pk & 0xFF);
-
- *is_full_member = fm;
- return err;
+ return -EINVAL;
}
int mlx4_ib_send_to_slave(struct mlx4_ib_dev *dev, int slave, u8 port,
@@ -458,10 +465,8 @@
unsigned tun_tx_ix = 0;
int dqpn;
int ret = 0;
- int i;
- int is_full_member = 0;
u16 tun_pkey_ix;
- u8 ph_pkey_ix, full_pk_ix = 0, partial_pk_ix = 0;
+ u16 cached_pkey;
if (dest_qpt > IB_QPT_GSI)
return -EINVAL;
@@ -481,27 +486,17 @@
else
tun_qp = &tun_ctx->qp[1];
- /* compute pkey index for slave */
- /* get physical pkey -- virtualized Dom0 pkey to phys*/
+ /* compute P_Key index to put in tunnel header for slave */
if (dest_qpt) {
- ph_pkey_ix =
- dev->pkeys.virt2phys_pkey[mlx4_master_func_num(dev->dev)][port - 1][wc->pkey_index];
-
- /* now, translate this to the slave pkey index */
- ret = get_pkey_phys_indices(dev, port, ph_pkey_ix, &full_pk_ix,
- &partial_pk_ix, &is_full_member);
+ u16 pkey_ix;
+ ret = ib_get_cached_pkey(&dev->ib_dev, port, wc->pkey_index, &cached_pkey);
if (ret)
return -EINVAL;
- for (i = 0; i < dev->dev->caps.pkey_table_len[port]; i++) {
- if ((dev->pkeys.virt2phys_pkey[slave][port - 1][i] == full_pk_ix) ||
- (is_full_member &&
- (dev->pkeys.virt2phys_pkey[slave][port - 1][i] == partial_pk_ix)))
- break;
- }
- if (i == dev->dev->caps.pkey_table_len[port])
+ ret = find_slave_port_pkey_ix(dev, slave, port, cached_pkey, &pkey_ix);
+ if (ret)
return -EINVAL;
- tun_pkey_ix = i;
+ tun_pkey_ix = pkey_ix;
} else
tun_pkey_ix = dev->pkeys.virt2phys_pkey[slave][port - 1][0];
diff --git a/drivers/infiniband/hw/mlx4/mcg.c b/drivers/infiniband/hw/mlx4/mcg.c
index 3c3b54c..25b2cdf 100644
--- a/drivers/infiniband/hw/mlx4/mcg.c
+++ b/drivers/infiniband/hw/mlx4/mcg.c
@@ -233,7 +233,8 @@
ib_query_ah(dev->sm_ah[ctx->port - 1], &ah_attr);
- wc.pkey_index = 0;
+ if (ib_find_cached_pkey(&dev->ib_dev, ctx->port, IB_DEFAULT_PKEY_FULL, &wc.pkey_index))
+ return -EINVAL;
wc.sl = 0;
wc.dlid_path_bits = 0;
wc.port_num = ctx->port;
@@ -1074,10 +1075,6 @@
unsigned long end;
int count;
- if (ctx->flushing)
- return;
-
- ctx->flushing = 1;
for (i = 0; i < MAX_VFS; ++i)
clean_vf_mcast(ctx, i);
@@ -1107,9 +1104,6 @@
force_clean_group(group);
}
mutex_unlock(&ctx->mcg_table_lock);
-
- if (!destroy_wq)
- ctx->flushing = 0;
}
struct clean_work {
@@ -1123,6 +1117,7 @@
struct clean_work *cw = container_of(work, struct clean_work, work);
_mlx4_ib_mcg_port_cleanup(cw->ctx, cw->destroy_wq);
+ cw->ctx->flushing = 0;
kfree(cw);
}
@@ -1130,13 +1125,20 @@
{
struct clean_work *work;
+ if (ctx->flushing)
+ return;
+
+ ctx->flushing = 1;
+
if (destroy_wq) {
_mlx4_ib_mcg_port_cleanup(ctx, destroy_wq);
+ ctx->flushing = 0;
return;
}
work = kmalloc(sizeof *work, GFP_KERNEL);
if (!work) {
+ ctx->flushing = 0;
mcg_warn("failed allocating work for cleanup\n");
return;
}
diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c
index 6ae2ac4..f0f8928 100644
--- a/drivers/input/evdev.c
+++ b/drivers/input/evdev.c
@@ -292,7 +292,6 @@
kfree(client);
evdev_close_device(evdev);
- put_device(&evdev->dev);
return 0;
}
@@ -331,7 +330,6 @@
file->private_data = client;
nonseekable_open(inode, file);
- get_device(&evdev->dev);
return 0;
err_free_client:
@@ -1001,6 +999,7 @@
goto err_free_evdev;
cdev_init(&evdev->cdev, &evdev_fops);
+ evdev->cdev.kobj.parent = &evdev->dev.kobj;
error = cdev_add(&evdev->cdev, evdev->dev.devt, 1);
if (error)
goto err_unregister_handle;
diff --git a/drivers/input/input-mt.c b/drivers/input/input-mt.c
index c0ec7d4..1abbc17 100644
--- a/drivers/input/input-mt.c
+++ b/drivers/input/input-mt.c
@@ -26,10 +26,14 @@
* input_mt_init_slots() - initialize MT input slots
* @dev: input device supporting MT events and finger tracking
* @num_slots: number of slots used by the device
+ * @flags: mt tasks to handle in core
*
* This function allocates all necessary memory for MT slot handling
* in the input device, prepares the ABS_MT_SLOT and
* ABS_MT_TRACKING_ID events for use and sets up appropriate buffers.
+ * Depending on the flags set, it also performs pointer emulation and
+ * frame synchronization.
+ *
* May be called repeatedly. Returns -EINVAL if attempting to
* reinitialize with a different number of slots.
*/
diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c
index b62b589..f362883 100644
--- a/drivers/input/joydev.c
+++ b/drivers/input/joydev.c
@@ -243,7 +243,6 @@
kfree(client);
joydev_close_device(joydev);
- put_device(&joydev->dev);
return 0;
}
@@ -270,7 +269,6 @@
file->private_data = client;
nonseekable_open(inode, file);
- get_device(&joydev->dev);
return 0;
err_free_client:
@@ -858,6 +856,7 @@
goto err_free_joydev;
cdev_init(&joydev->cdev, &joydev_fops);
+ joydev->cdev.kobj.parent = &joydev->dev.kobj;
error = cdev_add(&joydev->cdev, joydev->dev.devt, 1);
if (error)
goto err_unregister_handle;
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index b4b65af..de08740 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -335,6 +335,7 @@
config KEYBOARD_LPC32XX
tristate "LPC32XX matrix key scanner support"
depends on ARCH_LPC32XX && OF
+ select INPUT_MATRIXKMAP
help
Say Y here if you want to use NXP LPC32XX SoC key scanner interface,
connected to a key matrix.
diff --git a/drivers/input/keyboard/pxa27x_keypad.c b/drivers/input/keyboard/pxa27x_keypad.c
index 803ff6f..cad9d5d 100644
--- a/drivers/input/keyboard/pxa27x_keypad.c
+++ b/drivers/input/keyboard/pxa27x_keypad.c
@@ -368,6 +368,9 @@
unsigned int mask = 0, direct_key_num = 0;
unsigned long kpc = 0;
+ /* clear pending interrupt bit */
+ keypad_readl(KPC);
+
/* enable matrix keys with automatic scan */
if (pdata->matrix_key_rows && pdata->matrix_key_cols) {
kpc |= KPC_ASACT | KPC_MIE | KPC_ME | KPC_MS_ALL;
diff --git a/drivers/input/misc/xen-kbdfront.c b/drivers/input/misc/xen-kbdfront.c
index 02ca868..6f7d990 100644
--- a/drivers/input/misc/xen-kbdfront.c
+++ b/drivers/input/misc/xen-kbdfront.c
@@ -311,7 +311,6 @@
case XenbusStateReconfiguring:
case XenbusStateReconfigured:
case XenbusStateUnknown:
- case XenbusStateClosed:
break;
case XenbusStateInitWait:
@@ -350,6 +349,10 @@
break;
+ case XenbusStateClosed:
+ if (dev->state == XenbusStateClosed)
+ break;
+ /* Missed the backend's CLOSING state -- fallthrough */
case XenbusStateClosing:
xenbus_frontend_closed(dev);
break;
diff --git a/drivers/input/mouse/bcm5974.c b/drivers/input/mouse/bcm5974.c
index 3a78f23..2baff1b 100644
--- a/drivers/input/mouse/bcm5974.c
+++ b/drivers/input/mouse/bcm5974.c
@@ -84,6 +84,10 @@
#define USB_DEVICE_ID_APPLE_WELLSPRING7_ANSI 0x0262
#define USB_DEVICE_ID_APPLE_WELLSPRING7_ISO 0x0263
#define USB_DEVICE_ID_APPLE_WELLSPRING7_JIS 0x0264
+/* MacbookPro10,2 (unibody, October 2012) */
+#define USB_DEVICE_ID_APPLE_WELLSPRING7A_ANSI 0x0259
+#define USB_DEVICE_ID_APPLE_WELLSPRING7A_ISO 0x025a
+#define USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS 0x025b
#define BCM5974_DEVICE(prod) { \
.match_flags = (USB_DEVICE_ID_MATCH_DEVICE | \
@@ -137,6 +141,10 @@
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7_ANSI),
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7_ISO),
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7_JIS),
+ /* MacbookPro10,2 */
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7A_ANSI),
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7A_ISO),
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS),
/* Terminating entry */
{}
};
@@ -379,6 +387,19 @@
{ SN_COORD, -150, 6730 },
{ SN_ORIENT, -MAX_FINGER_ORIENTATION, MAX_FINGER_ORIENTATION }
},
+ {
+ USB_DEVICE_ID_APPLE_WELLSPRING7A_ANSI,
+ USB_DEVICE_ID_APPLE_WELLSPRING7A_ISO,
+ USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS,
+ HAS_INTEGRATED_BUTTON,
+ 0x84, sizeof(struct bt_data),
+ 0x81, TYPE2, FINGER_TYPE2, FINGER_TYPE2 + SIZEOF_ALL_FINGERS,
+ { SN_PRESSURE, 0, 300 },
+ { SN_WIDTH, 0, 2048 },
+ { SN_COORD, -4750, 5280 },
+ { SN_COORD, -150, 6730 },
+ { SN_ORIENT, -MAX_FINGER_ORIENTATION, MAX_FINGER_ORIENTATION }
+ },
{}
};
diff --git a/drivers/input/mousedev.c b/drivers/input/mousedev.c
index a1b4c37..4c842c3 100644
--- a/drivers/input/mousedev.c
+++ b/drivers/input/mousedev.c
@@ -12,8 +12,8 @@
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#define MOUSEDEV_MINOR_BASE 32
-#define MOUSEDEV_MINORS 32
-#define MOUSEDEV_MIX 31
+#define MOUSEDEV_MINORS 31
+#define MOUSEDEV_MIX 63
#include <linux/sched.h>
#include <linux/slab.h>
@@ -523,7 +523,6 @@
kfree(client);
mousedev_close_device(mousedev);
- put_device(&mousedev->dev);
return 0;
}
@@ -558,7 +557,6 @@
file->private_data = client;
nonseekable_open(inode, file);
- get_device(&mousedev->dev);
return 0;
err_free_client:
@@ -892,6 +890,7 @@
}
cdev_init(&mousedev->cdev, &mousedev_fops);
+ mousedev->cdev.kobj.parent = &mousedev->dev.kobj;
error = cdev_add(&mousedev->cdev, mousedev->dev.devt, 1);
if (error)
goto err_unregister_handle;
diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c
index 9edf980..858ad44 100644
--- a/drivers/input/tablet/wacom_sys.c
+++ b/drivers/input/tablet/wacom_sys.c
@@ -391,7 +391,7 @@
features->pktlen = WACOM_PKGLEN_TPC2FG;
}
- if (features->type == MTSCREEN)
+ if (features->type == MTSCREEN || features->type == WACOM_24HDT)
features->pktlen = WACOM_PKGLEN_MTOUCH;
if (features->type == BAMBOO_PT) {
@@ -402,6 +402,14 @@
features->x_max =
get_unaligned_le16(&report[i + 8]);
i += 15;
+ } else if (features->type == WACOM_24HDT) {
+ features->x_max =
+ get_unaligned_le16(&report[i + 3]);
+ features->x_phy =
+ get_unaligned_le16(&report[i + 8]);
+ features->unit = report[i - 1];
+ features->unitExpo = report[i - 3];
+ i += 12;
} else {
features->x_max =
get_unaligned_le16(&report[i + 3]);
@@ -434,6 +442,12 @@
features->y_phy =
get_unaligned_le16(&report[i + 6]);
i += 7;
+ } else if (type == WACOM_24HDT) {
+ features->y_max =
+ get_unaligned_le16(&report[i + 3]);
+ features->y_phy =
+ get_unaligned_le16(&report[i - 2]);
+ i += 7;
} else if (type == BAMBOO_PT) {
features->y_phy =
get_unaligned_le16(&report[i + 3]);
@@ -541,6 +555,9 @@
/* MT Tablet PC touch */
return wacom_set_device_mode(intf, 3, 4, 4);
}
+ else if (features->type == WACOM_24HDT) {
+ return wacom_set_device_mode(intf, 18, 3, 2);
+ }
} else if (features->device_type == BTN_TOOL_PEN) {
if (features->type <= BAMBOO_PT && features->type != WIRELESS) {
return wacom_set_device_mode(intf, 2, 2, 2);
@@ -613,6 +630,30 @@
static LIST_HEAD(wacom_udev_list);
static DEFINE_MUTEX(wacom_udev_list_lock);
+static struct usb_device *wacom_get_sibling(struct usb_device *dev, int vendor, int product)
+{
+ int port1;
+ struct usb_device *sibling;
+
+ if (vendor == 0 && product == 0)
+ return dev;
+
+ if (dev->parent == NULL)
+ return NULL;
+
+ usb_hub_for_each_child(dev->parent, port1, sibling) {
+ struct usb_device_descriptor *d;
+ if (sibling == NULL)
+ continue;
+
+ d = &sibling->descriptor;
+ if (d->idVendor == vendor && d->idProduct == product)
+ return sibling;
+ }
+
+ return NULL;
+}
+
static struct wacom_usbdev_data *wacom_get_usbdev_data(struct usb_device *dev)
{
struct wacom_usbdev_data *data;
@@ -1257,13 +1298,19 @@
strlcpy(wacom_wac->name, features->name, sizeof(wacom_wac->name));
if (features->quirks & WACOM_QUIRK_MULTI_INPUT) {
+ struct usb_device *other_dev;
+
/* Append the device type to the name */
strlcat(wacom_wac->name,
features->device_type == BTN_TOOL_PEN ?
" Pen" : " Finger",
sizeof(wacom_wac->name));
- error = wacom_add_shared_data(wacom_wac, dev);
+
+ other_dev = wacom_get_sibling(dev, features->oVid, features->oPid);
+ if (other_dev == NULL || wacom_get_usbdev_data(other_dev) == NULL)
+ other_dev = dev;
+ error = wacom_add_shared_data(wacom_wac, other_dev);
if (error)
goto fail3;
}
diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index c3468c8..0a67031f 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -806,6 +806,70 @@
return -1;
}
+static int int_dist(int x1, int y1, int x2, int y2)
+{
+ int x = x2 - x1;
+ int y = y2 - y1;
+
+ return int_sqrt(x*x + y*y);
+}
+
+static int wacom_24hdt_irq(struct wacom_wac *wacom)
+{
+ struct input_dev *input = wacom->input;
+ char *data = wacom->data;
+ int i;
+ int current_num_contacts = data[61];
+ int contacts_to_send = 0;
+
+ /*
+ * First packet resets the counter since only the first
+ * packet in series will have non-zero current_num_contacts.
+ */
+ if (current_num_contacts)
+ wacom->num_contacts_left = current_num_contacts;
+
+ /* There are at most 4 contacts per packet */
+ contacts_to_send = min(4, wacom->num_contacts_left);
+
+ for (i = 0; i < contacts_to_send; i++) {
+ int offset = (WACOM_BYTES_PER_24HDT_PACKET * i) + 1;
+ bool touch = data[offset] & 0x1 && !wacom->shared->stylus_in_proximity;
+ int id = data[offset + 1];
+ int slot = find_slot_from_contactid(wacom, id);
+
+ if (slot < 0)
+ continue;
+ input_mt_slot(input, slot);
+ input_mt_report_slot_state(input, MT_TOOL_FINGER, touch);
+
+ if (touch) {
+ int t_x = le16_to_cpup((__le16 *)&data[offset + 2]);
+ int c_x = le16_to_cpup((__le16 *)&data[offset + 4]);
+ int t_y = le16_to_cpup((__le16 *)&data[offset + 6]);
+ int c_y = le16_to_cpup((__le16 *)&data[offset + 8]);
+ int w = le16_to_cpup((__le16 *)&data[offset + 10]);
+ int h = le16_to_cpup((__le16 *)&data[offset + 12]);
+
+ input_report_abs(input, ABS_MT_POSITION_X, t_x);
+ input_report_abs(input, ABS_MT_POSITION_Y, t_y);
+ input_report_abs(input, ABS_MT_TOUCH_MAJOR, min(w,h));
+ input_report_abs(input, ABS_MT_WIDTH_MAJOR, min(w, h) + int_dist(t_x, t_y, c_x, c_y));
+ input_report_abs(input, ABS_MT_WIDTH_MINOR, min(w, h));
+ input_report_abs(input, ABS_MT_ORIENTATION, w > h);
+ }
+ wacom->slots[slot] = touch ? id : -1;
+ }
+
+ input_mt_report_pointer_emulation(input, true);
+
+ wacom->num_contacts_left -= contacts_to_send;
+ if (wacom->num_contacts_left <= 0)
+ wacom->num_contacts_left = 0;
+
+ return 1;
+}
+
static int wacom_mt_touch(struct wacom_wac *wacom)
{
struct input_dev *input = wacom->input;
@@ -1255,6 +1319,10 @@
sync = wacom_intuos_irq(wacom_wac);
break;
+ case WACOM_24HDT:
+ sync = wacom_24hdt_irq(wacom_wac);
+ break;
+
case INTUOS5S:
case INTUOS5:
case INTUOS5L:
@@ -1340,7 +1408,8 @@
/* these device have multiple inputs */
if (features->type >= WIRELESS ||
- (features->type >= INTUOS5S && features->type <= INTUOS5L))
+ (features->type >= INTUOS5S && features->type <= INTUOS5L) ||
+ (features->oVid && features->oPid))
features->quirks |= WACOM_QUIRK_MULTI_INPUT;
/* quirk for bamboo touch with 2 low res touches */
@@ -1449,6 +1518,9 @@
input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
input_set_abs_params(input_dev, ABS_THROTTLE, 0, 71, 0, 0);
+
+ __set_bit(INPUT_PROP_DIRECT, input_dev->propbit);
+
wacom_setup_cintiq(wacom_wac);
break;
@@ -1575,6 +1647,15 @@
__set_bit(INPUT_PROP_POINTER, input_dev->propbit);
break;
+ case WACOM_24HDT:
+ if (features->device_type == BTN_TOOL_FINGER) {
+ input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0, features->x_max, 0, 0);
+ input_set_abs_params(input_dev, ABS_MT_WIDTH_MAJOR, 0, features->x_max, 0, 0);
+ input_set_abs_params(input_dev, ABS_MT_WIDTH_MINOR, 0, features->y_max, 0, 0);
+ input_set_abs_params(input_dev, ABS_MT_ORIENTATION, 0, 1, 0, 0);
+ }
+ /* fall through */
+
case MTSCREEN:
if (features->device_type == BTN_TOOL_FINGER) {
wacom_wac->slots = kmalloc(features->touch_max *
@@ -1869,8 +1950,11 @@
{ "Wacom Cintiq 24HD", WACOM_PKGLEN_INTUOS, 104480, 65600, 2047,
63, WACOM_24HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
static const struct wacom_features wacom_features_0xF8 =
- { "Wacom Cintiq 24HD touch", WACOM_PKGLEN_INTUOS, 104480, 65600, 2047,
- 63, WACOM_24HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
+ { "Wacom Cintiq 24HD touch", WACOM_PKGLEN_INTUOS, 104480, 65600, 2047, /* Pen */
+ 63, WACOM_24HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, .oVid = USB_VENDOR_ID_WACOM, .oPid = 0xf6 };
+static const struct wacom_features wacom_features_0xF6 =
+ { "Wacom Cintiq 24HD touch", .type = WACOM_24HDT, /* Touch */
+ .oVid = USB_VENDOR_ID_WACOM, .oPid = 0xf8, .touch_max = 10 };
static const struct wacom_features wacom_features_0x3F =
{ "Wacom Cintiq 21UX", WACOM_PKGLEN_INTUOS, 87200, 65600, 1023,
63, CINTIQ, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
@@ -2113,6 +2197,7 @@
{ USB_DEVICE_WACOM(0x47) },
{ USB_DEVICE_WACOM(0xF4) },
{ USB_DEVICE_WACOM(0xF8) },
+ { USB_DEVICE_WACOM(0xF6) },
{ USB_DEVICE_WACOM(0xFA) },
{ USB_DEVICE_LENOVO(0x6004) },
{ }
diff --git a/drivers/input/tablet/wacom_wac.h b/drivers/input/tablet/wacom_wac.h
index 96c185c..345f1e7 100644
--- a/drivers/input/tablet/wacom_wac.h
+++ b/drivers/input/tablet/wacom_wac.h
@@ -29,6 +29,7 @@
/* wacom data size per MT contact */
#define WACOM_BYTES_PER_MT_PACKET 11
+#define WACOM_BYTES_PER_24HDT_PACKET 14
/* device IDs */
#define STYLUS_DEVICE_ID 0x02
@@ -49,6 +50,7 @@
#define WACOM_REPORT_TPCHID 15
#define WACOM_REPORT_TPCST 16
#define WACOM_REPORT_TPC1FGE 18
+#define WACOM_REPORT_24HDT 1
/* device quirks */
#define WACOM_QUIRK_MULTI_INPUT 0x0001
@@ -81,6 +83,7 @@
WACOM_MO,
WIRELESS,
BAMBOO_PT,
+ WACOM_24HDT,
TABLETPC, /* add new TPC below */
TABLETPCE,
TABLETPC2FG,
@@ -109,6 +112,8 @@
int distance_fuzz;
unsigned quirks;
unsigned touch_max;
+ int oVid;
+ int oPid;
};
struct wacom_shared {
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 1ba232c..f7668b2 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -239,7 +239,7 @@
config TOUCHSCREEN_EGALAX
tristate "EETI eGalax multi-touch panel support"
- depends on I2C
+ depends on I2C && OF
help
Say Y here to enable support for I2C connected EETI
eGalax multi-touch panels.
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index f02028e..78e5d9a 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -955,7 +955,8 @@
static SIMPLE_DEV_PM_OPS(ads7846_pm, ads7846_suspend, ads7846_resume);
-static int __devinit ads7846_setup_pendown(struct spi_device *spi, struct ads7846 *ts)
+static int __devinit ads7846_setup_pendown(struct spi_device *spi,
+ struct ads7846 *ts)
{
struct ads7846_platform_data *pdata = spi->dev.platform_data;
int err;
@@ -981,6 +982,9 @@
ts->gpio_pendown = pdata->gpio_pendown;
+ if (pdata->gpio_pendown_debounce)
+ gpio_set_debounce(pdata->gpio_pendown,
+ pdata->gpio_pendown_debounce);
} else {
dev_err(&spi->dev, "no get_pendown_state nor gpio_pendown?\n");
return -EINVAL;
diff --git a/drivers/input/touchscreen/egalax_ts.c b/drivers/input/touchscreen/egalax_ts.c
index c1e3460..13fa62f 100644
--- a/drivers/input/touchscreen/egalax_ts.c
+++ b/drivers/input/touchscreen/egalax_ts.c
@@ -28,6 +28,7 @@
#include <linux/slab.h>
#include <linux/bitops.h>
#include <linux/input/mt.h>
+#include <linux/of_gpio.h>
/*
* Mouse Mode: some panel may configure the controller to mouse mode,
@@ -122,9 +123,17 @@
/* wake up controller by an falling edge of interrupt gpio. */
static int egalax_wake_up_device(struct i2c_client *client)
{
- int gpio = irq_to_gpio(client->irq);
+ struct device_node *np = client->dev.of_node;
+ int gpio;
int ret;
+ if (!np)
+ return -ENODEV;
+
+ gpio = of_get_named_gpio(np, "wakeup-gpios", 0);
+ if (!gpio_is_valid(gpio))
+ return -ENODEV;
+
ret = gpio_request(gpio, "egalax_irq");
if (ret < 0) {
dev_err(&client->dev,
@@ -181,7 +190,11 @@
ts->input_dev = input_dev;
/* controller may be in sleep, wake it up. */
- egalax_wake_up_device(client);
+ error = egalax_wake_up_device(client);
+ if (error) {
+ dev_err(&client->dev, "Failed to wake up the controller\n");
+ goto err_free_dev;
+ }
ret = egalax_firmware_version(client);
if (ret < 0) {
@@ -274,11 +287,17 @@
static SIMPLE_DEV_PM_OPS(egalax_ts_pm_ops, egalax_ts_suspend, egalax_ts_resume);
+static struct of_device_id egalax_ts_dt_ids[] = {
+ { .compatible = "eeti,egalax_ts" },
+ { /* sentinel */ }
+};
+
static struct i2c_driver egalax_ts_driver = {
.driver = {
.name = "egalax_ts",
.owner = THIS_MODULE,
.pm = &egalax_ts_pm_ops,
+ .of_match_table = of_match_ptr(egalax_ts_dt_ids),
},
.id_table = egalax_ts_id,
.probe = egalax_ts_probe,
diff --git a/drivers/input/touchscreen/tsc40.c b/drivers/input/touchscreen/tsc40.c
index 63209aa..eb96f16 100644
--- a/drivers/input/touchscreen/tsc40.c
+++ b/drivers/input/touchscreen/tsc40.c
@@ -107,7 +107,6 @@
__set_bit(BTN_TOUCH, input_dev->keybit);
input_set_abs_params(ptsc->dev, ABS_X, 0, 0x3ff, 0, 0);
input_set_abs_params(ptsc->dev, ABS_Y, 0, 0x3ff, 0, 0);
- input_set_abs_params(ptsc->dev, ABS_PRESSURE, 0, 0, 0, 0);
serio_set_drvdata(serio, ptsc);
diff --git a/drivers/iommu/amd_iommu_init.c b/drivers/iommu/amd_iommu_init.c
index 18b0d99..81837b0 100644
--- a/drivers/iommu/amd_iommu_init.c
+++ b/drivers/iommu/amd_iommu_init.c
@@ -1599,21 +1599,46 @@
#endif
}
+/* SB IOAPIC is always on this device in AMD systems */
+#define IOAPIC_SB_DEVID ((0x00 << 8) | PCI_DEVFN(0x14, 0))
+
static bool __init check_ioapic_information(void)
{
+ bool ret, has_sb_ioapic;
int idx;
- for (idx = 0; idx < nr_ioapics; idx++) {
- int id = mpc_ioapic_id(idx);
+ has_sb_ioapic = false;
+ ret = false;
- if (get_ioapic_devid(id) < 0) {
- pr_err(FW_BUG "AMD-Vi: IO-APIC[%d] not in IVRS table\n", id);
- pr_err("AMD-Vi: Disabling interrupt remapping due to BIOS Bug\n");
- return false;
+ for (idx = 0; idx < nr_ioapics; idx++) {
+ int devid, id = mpc_ioapic_id(idx);
+
+ devid = get_ioapic_devid(id);
+ if (devid < 0) {
+ pr_err(FW_BUG "AMD-Vi: IOAPIC[%d] not in IVRS table\n", id);
+ ret = false;
+ } else if (devid == IOAPIC_SB_DEVID) {
+ has_sb_ioapic = true;
+ ret = true;
}
}
- return true;
+ if (!has_sb_ioapic) {
+ /*
+ * We expect the SB IOAPIC to be listed in the IVRS
+ * table. The system timer is connected to the SB IOAPIC
+ * and if we don't have it in the list the system will
+ * panic at boot time. This situation usually happens
+ * when the BIOS is buggy and provides us the wrong
+ * device id for the IOAPIC in the system.
+ */
+ pr_err(FW_BUG "AMD-Vi: No southbridge IOAPIC found in IVRS table\n");
+ }
+
+ if (!ret)
+ pr_err("AMD-Vi: Disabling interrupt remapping due to BIOS Bug(s)\n");
+
+ return ret;
}
static void __init free_dma_resources(void)
diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c
index d4a4cd4..0badfa4 100644
--- a/drivers/iommu/intel-iommu.c
+++ b/drivers/iommu/intel-iommu.c
@@ -4108,7 +4108,7 @@
static int intel_iommu_add_device(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
- struct pci_dev *bridge, *dma_pdev;
+ struct pci_dev *bridge, *dma_pdev = NULL;
struct iommu_group *group;
int ret;
@@ -4122,7 +4122,7 @@
dma_pdev = pci_get_domain_bus_and_slot(
pci_domain_nr(pdev->bus),
bridge->subordinate->number, 0);
- else
+ if (!dma_pdev)
dma_pdev = pci_dev_get(bridge);
} else
dma_pdev = pci_dev_get(pdev);
diff --git a/drivers/iommu/tegra-smmu.c b/drivers/iommu/tegra-smmu.c
index 0b4d62e..4252d74 100644
--- a/drivers/iommu/tegra-smmu.c
+++ b/drivers/iommu/tegra-smmu.c
@@ -34,13 +34,11 @@
#include <linux/of_iommu.h>
#include <linux/debugfs.h>
#include <linux/seq_file.h>
+#include <linux/tegra-ahb.h>
#include <asm/page.h>
#include <asm/cacheflush.h>
-#include <mach/iomap.h>
-#include <mach/tegra-ahb.h>
-
enum smmu_hwgrp {
HWGRP_AFI,
HWGRP_AVPC,
@@ -200,7 +198,7 @@
#define SMMU_ADDR_TO_PFN(addr) ((addr) >> 12)
#define SMMU_ADDR_TO_PDN(addr) ((addr) >> 22)
-#define SMMU_PDN_TO_ADDR(addr) ((pdn) << 22)
+#define SMMU_PDN_TO_ADDR(pdn) ((pdn) << 22)
#define _READABLE (1 << SMMU_PTB_DATA_ASID_READABLE_SHIFT)
#define _WRITABLE (1 << SMMU_PTB_DATA_ASID_WRITABLE_SHIFT)
@@ -1054,6 +1052,7 @@
stats[i], val, offs);
}
seq_printf(s, "\n");
+ dput(dent);
return 0;
}
diff --git a/drivers/irqchip/irq-bcm2835.c b/drivers/irqchip/irq-bcm2835.c
index dc670cc..16c78f1 100644
--- a/drivers/irqchip/irq-bcm2835.c
+++ b/drivers/irqchip/irq-bcm2835.c
@@ -168,7 +168,8 @@
}
static struct of_device_id irq_of_match[] __initconst = {
- { .compatible = "brcm,bcm2835-armctrl-ic", .data = armctrl_of_init }
+ { .compatible = "brcm,bcm2835-armctrl-ic", .data = armctrl_of_init },
+ { }
};
void __init bcm2835_init_irq(void)
diff --git a/drivers/isdn/Kconfig b/drivers/isdn/Kconfig
index a233ed5..86cd75a 100644
--- a/drivers/isdn/Kconfig
+++ b/drivers/isdn/Kconfig
@@ -4,7 +4,7 @@
menuconfig ISDN
bool "ISDN support"
- depends on NET
+ depends on NET && NETDEVICES
depends on !S390 && !UML
---help---
ISDN ("Integrated Services Digital Network", called RNIS in France)
diff --git a/drivers/isdn/gigaset/bas-gigaset.c b/drivers/isdn/gigaset/bas-gigaset.c
index 5275887..c44950d 100644
--- a/drivers/isdn/gigaset/bas-gigaset.c
+++ b/drivers/isdn/gigaset/bas-gigaset.c
@@ -617,7 +617,13 @@
if (rc == 0)
/* success, resubmit interrupt read URB */
rc = usb_submit_urb(urb, GFP_ATOMIC);
- if (rc != 0 && rc != -ENODEV) {
+
+ switch (rc) {
+ case 0: /* success */
+ case -ENODEV: /* device gone */
+ case -EINVAL: /* URB already resubmitted, or terminal badness */
+ break;
+ default: /* failure: try to recover by resetting the device */
dev_err(cs->dev, "clear halt failed: %s\n", get_usb_rcmsg(rc));
rc = usb_lock_device_for_reset(ucs->udev, ucs->interface);
if (rc == 0) {
@@ -2442,7 +2448,9 @@
}
/* gigaset_suspend
- * This function is called before the USB connection is suspended.
+ * This function is called before the USB connection is suspended
+ * or before the USB device is reset.
+ * In the latter case, message == PMSG_ON.
*/
static int gigaset_suspend(struct usb_interface *intf, pm_message_t message)
{
@@ -2498,7 +2506,12 @@
del_timer_sync(&ucs->timer_atrdy);
del_timer_sync(&ucs->timer_cmd_in);
del_timer_sync(&ucs->timer_int_in);
- cancel_work_sync(&ucs->int_in_wq);
+
+ /* don't try to cancel int_in_wq from within reset as it
+ * might be the one requesting the reset
+ */
+ if (message.event != PM_EVENT_ON)
+ cancel_work_sync(&ucs->int_in_wq);
gig_dbg(DEBUG_SUSPEND, "suspend complete");
return 0;
diff --git a/drivers/isdn/i4l/Kconfig b/drivers/isdn/i4l/Kconfig
index 2302fbe..9c6650e 100644
--- a/drivers/isdn/i4l/Kconfig
+++ b/drivers/isdn/i4l/Kconfig
@@ -6,7 +6,7 @@
config ISDN_PPP
bool "Support synchronous PPP"
- depends on INET && NETDEVICES
+ depends on INET
select SLHC
help
Over digital connections such as ISDN, there is no need to
diff --git a/drivers/isdn/i4l/isdn_common.c b/drivers/isdn/i4l/isdn_common.c
index 8c610fa..e2a945e 100644
--- a/drivers/isdn/i4l/isdn_common.c
+++ b/drivers/isdn/i4l/isdn_common.c
@@ -1312,7 +1312,6 @@
} else
return -EINVAL;
break;
-#ifdef CONFIG_NETDEVICES
case IIOCNETGPN:
/* Get peer phone number of a connected
* isdn network interface */
@@ -1322,7 +1321,6 @@
return isdn_net_getpeer(&phone, argp);
} else
return -EINVAL;
-#endif
default:
return -EINVAL;
}
@@ -1352,7 +1350,6 @@
case IIOCNETLCR:
printk(KERN_INFO "INFO: ISDN_ABC_LCR_SUPPORT not enabled\n");
return -ENODEV;
-#ifdef CONFIG_NETDEVICES
case IIOCNETAIF:
/* Add a network-interface */
if (arg) {
@@ -1491,7 +1488,6 @@
return -EFAULT;
return isdn_net_force_hangup(name);
break;
-#endif /* CONFIG_NETDEVICES */
case IIOCSETVER:
dev->net_verbose = arg;
printk(KERN_INFO "isdn: Verbose-Level is %d\n", dev->net_verbose);
diff --git a/drivers/leds/ledtrig-cpu.c b/drivers/leds/ledtrig-cpu.c
index b312056..4239b39 100644
--- a/drivers/leds/ledtrig-cpu.c
+++ b/drivers/leds/ledtrig-cpu.c
@@ -33,8 +33,6 @@
struct led_trigger_cpu {
char name[MAX_NAME_LEN];
struct led_trigger *_trig;
- struct mutex lock;
- int lock_is_inited;
};
static DEFINE_PER_CPU(struct led_trigger_cpu, cpu_trig);
@@ -50,12 +48,6 @@
{
struct led_trigger_cpu *trig = &__get_cpu_var(cpu_trig);
- /* mutex lock should be initialized before calling mutex_call() */
- if (!trig->lock_is_inited)
- return;
-
- mutex_lock(&trig->lock);
-
/* Locate the correct CPU LED */
switch (ledevt) {
case CPU_LED_IDLE_END:
@@ -75,8 +67,6 @@
/* Will leave the LED as it is */
break;
}
-
- mutex_unlock(&trig->lock);
}
EXPORT_SYMBOL(ledtrig_cpu);
@@ -117,14 +107,9 @@
for_each_possible_cpu(cpu) {
struct led_trigger_cpu *trig = &per_cpu(cpu_trig, cpu);
- mutex_init(&trig->lock);
-
snprintf(trig->name, MAX_NAME_LEN, "cpu%d", cpu);
- mutex_lock(&trig->lock);
led_trigger_register_simple(trig->name, &trig->_trig);
- trig->lock_is_inited = 1;
- mutex_unlock(&trig->lock);
}
register_syscore_ops(&ledtrig_cpu_syscore_ops);
@@ -142,15 +127,9 @@
for_each_possible_cpu(cpu) {
struct led_trigger_cpu *trig = &per_cpu(cpu_trig, cpu);
- mutex_lock(&trig->lock);
-
led_trigger_unregister_simple(trig->_trig);
trig->_trig = NULL;
memset(trig->name, 0, MAX_NAME_LEN);
- trig->lock_is_inited = 0;
-
- mutex_unlock(&trig->lock);
- mutex_destroy(&trig->lock);
}
unregister_syscore_ops(&ledtrig_cpu_syscore_ops);
diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index 02db9183..77e6eff 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -740,8 +740,14 @@
if (!md_in_flight(md))
wake_up(&md->wait);
+ /*
+ * Run this off this callpath, as drivers could invoke end_io while
+ * inside their request_fn (and holding the queue lock). Calling
+ * back into ->request_fn() could deadlock attempting to grab the
+ * queue lock again.
+ */
if (run_queue)
- blk_run_queue(md->queue);
+ blk_run_queue_async(md->queue);
/*
* dm_put() must be at the end of this function. See the comment above
diff --git a/drivers/md/faulty.c b/drivers/md/faulty.c
index 45135f6..5e7dc77 100644
--- a/drivers/md/faulty.c
+++ b/drivers/md/faulty.c
@@ -315,8 +315,11 @@
}
conf->nfaults = 0;
- rdev_for_each(rdev, mddev)
+ rdev_for_each(rdev, mddev) {
conf->rdev = rdev;
+ disk_stack_limits(mddev->gendisk, rdev->bdev,
+ rdev->data_offset << 9);
+ }
md_set_array_sectors(mddev, faulty_size(mddev, 0, 0));
mddev->private = conf;
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 9ab768a..6120071 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -1817,10 +1817,10 @@
memset(bbp, 0xff, PAGE_SIZE);
for (i = 0 ; i < bb->count ; i++) {
- u64 internal_bb = *p++;
+ u64 internal_bb = p[i];
u64 store_bb = ((BB_OFFSET(internal_bb) << 10)
| BB_LEN(internal_bb));
- *bbp++ = cpu_to_le64(store_bb);
+ bbp[i] = cpu_to_le64(store_bb);
}
bb->changed = 0;
if (read_seqretry(&bb->lock, seq))
@@ -5294,7 +5294,7 @@
}
EXPORT_SYMBOL_GPL(md_stop_writes);
-void md_stop(struct mddev *mddev)
+static void __md_stop(struct mddev *mddev)
{
mddev->ready = 0;
mddev->pers->stop(mddev);
@@ -5304,6 +5304,18 @@
mddev->pers = NULL;
clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
}
+
+void md_stop(struct mddev *mddev)
+{
+ /* stop the array and free an attached data structures.
+ * This is called from dm-raid
+ */
+ __md_stop(mddev);
+ bitmap_destroy(mddev);
+ if (mddev->bio_set)
+ bioset_free(mddev->bio_set);
+}
+
EXPORT_SYMBOL_GPL(md_stop);
static int md_set_readonly(struct mddev *mddev, struct block_device *bdev)
@@ -5364,7 +5376,7 @@
set_disk_ro(disk, 0);
__md_stop_writes(mddev);
- md_stop(mddev);
+ __md_stop(mddev);
mddev->queue->merge_bvec_fn = NULL;
mddev->queue->backing_dev_info.congested_fn = NULL;
@@ -7936,9 +7948,9 @@
sector_t *first_bad, int *bad_sectors)
{
int hi;
- int lo = 0;
+ int lo;
u64 *p = bb->page;
- int rv = 0;
+ int rv;
sector_t target = s + sectors;
unsigned seq;
@@ -7953,7 +7965,8 @@
retry:
seq = read_seqbegin(&bb->lock);
-
+ lo = 0;
+ rv = 0;
hi = bb->count;
/* Binary search between lo and hi for 'target'
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index 8034fbd..636bae0 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -2710,7 +2710,7 @@
|| disk_idx < 0)
continue;
if (test_bit(Replacement, &rdev->flags))
- disk = conf->mirrors + conf->raid_disks + disk_idx;
+ disk = conf->mirrors + mddev->raid_disks + disk_idx;
else
disk = conf->mirrors + disk_idx;
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index 906ccbd..0d5d0ff 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -499,7 +499,7 @@
*/
one_write_done(r10_bio);
if (dec_rdev)
- rdev_dec_pending(conf->mirrors[dev].rdev, conf->mddev);
+ rdev_dec_pending(rdev, conf->mddev);
}
/*
@@ -1334,18 +1334,21 @@
blocked_rdev = rrdev;
break;
}
+ if (rdev && (test_bit(Faulty, &rdev->flags)
+ || test_bit(Unmerged, &rdev->flags)))
+ rdev = NULL;
if (rrdev && (test_bit(Faulty, &rrdev->flags)
|| test_bit(Unmerged, &rrdev->flags)))
rrdev = NULL;
r10_bio->devs[i].bio = NULL;
r10_bio->devs[i].repl_bio = NULL;
- if (!rdev || test_bit(Faulty, &rdev->flags) ||
- test_bit(Unmerged, &rdev->flags)) {
+
+ if (!rdev && !rrdev) {
set_bit(R10BIO_Degraded, &r10_bio->state);
continue;
}
- if (test_bit(WriteErrorSeen, &rdev->flags)) {
+ if (rdev && test_bit(WriteErrorSeen, &rdev->flags)) {
sector_t first_bad;
sector_t dev_sector = r10_bio->devs[i].addr;
int bad_sectors;
@@ -1387,8 +1390,10 @@
max_sectors = good_sectors;
}
}
- r10_bio->devs[i].bio = bio;
- atomic_inc(&rdev->nr_pending);
+ if (rdev) {
+ r10_bio->devs[i].bio = bio;
+ atomic_inc(&rdev->nr_pending);
+ }
if (rrdev) {
r10_bio->devs[i].repl_bio = bio;
atomic_inc(&rrdev->nr_pending);
@@ -1444,69 +1449,71 @@
for (i = 0; i < conf->copies; i++) {
struct bio *mbio;
int d = r10_bio->devs[i].devnum;
- if (!r10_bio->devs[i].bio)
- continue;
+ if (r10_bio->devs[i].bio) {
+ struct md_rdev *rdev = conf->mirrors[d].rdev;
+ mbio = bio_clone_mddev(bio, GFP_NOIO, mddev);
+ md_trim_bio(mbio, r10_bio->sector - bio->bi_sector,
+ max_sectors);
+ r10_bio->devs[i].bio = mbio;
- mbio = bio_clone_mddev(bio, GFP_NOIO, mddev);
- md_trim_bio(mbio, r10_bio->sector - bio->bi_sector,
- max_sectors);
- r10_bio->devs[i].bio = mbio;
+ mbio->bi_sector = (r10_bio->devs[i].addr+
+ choose_data_offset(r10_bio,
+ rdev));
+ mbio->bi_bdev = rdev->bdev;
+ mbio->bi_end_io = raid10_end_write_request;
+ mbio->bi_rw = WRITE | do_sync | do_fua | do_discard;
+ mbio->bi_private = r10_bio;
- mbio->bi_sector = (r10_bio->devs[i].addr+
- choose_data_offset(r10_bio,
- conf->mirrors[d].rdev));
- mbio->bi_bdev = conf->mirrors[d].rdev->bdev;
- mbio->bi_end_io = raid10_end_write_request;
- mbio->bi_rw = WRITE | do_sync | do_fua | do_discard;
- mbio->bi_private = r10_bio;
+ atomic_inc(&r10_bio->remaining);
- atomic_inc(&r10_bio->remaining);
+ cb = blk_check_plugged(raid10_unplug, mddev,
+ sizeof(*plug));
+ if (cb)
+ plug = container_of(cb, struct raid10_plug_cb,
+ cb);
+ else
+ plug = NULL;
+ spin_lock_irqsave(&conf->device_lock, flags);
+ if (plug) {
+ bio_list_add(&plug->pending, mbio);
+ plug->pending_cnt++;
+ } else {
+ bio_list_add(&conf->pending_bio_list, mbio);
+ conf->pending_count++;
+ }
+ spin_unlock_irqrestore(&conf->device_lock, flags);
+ if (!plug)
+ md_wakeup_thread(mddev->thread);
+ }
- cb = blk_check_plugged(raid10_unplug, mddev, sizeof(*plug));
- if (cb)
- plug = container_of(cb, struct raid10_plug_cb, cb);
- else
- plug = NULL;
- spin_lock_irqsave(&conf->device_lock, flags);
- if (plug) {
- bio_list_add(&plug->pending, mbio);
- plug->pending_cnt++;
- } else {
+ if (r10_bio->devs[i].repl_bio) {
+ struct md_rdev *rdev = conf->mirrors[d].replacement;
+ if (rdev == NULL) {
+ /* Replacement just got moved to main 'rdev' */
+ smp_mb();
+ rdev = conf->mirrors[d].rdev;
+ }
+ mbio = bio_clone_mddev(bio, GFP_NOIO, mddev);
+ md_trim_bio(mbio, r10_bio->sector - bio->bi_sector,
+ max_sectors);
+ r10_bio->devs[i].repl_bio = mbio;
+
+ mbio->bi_sector = (r10_bio->devs[i].addr +
+ choose_data_offset(
+ r10_bio, rdev));
+ mbio->bi_bdev = rdev->bdev;
+ mbio->bi_end_io = raid10_end_write_request;
+ mbio->bi_rw = WRITE | do_sync | do_fua | do_discard;
+ mbio->bi_private = r10_bio;
+
+ atomic_inc(&r10_bio->remaining);
+ spin_lock_irqsave(&conf->device_lock, flags);
bio_list_add(&conf->pending_bio_list, mbio);
conf->pending_count++;
+ spin_unlock_irqrestore(&conf->device_lock, flags);
+ if (!mddev_check_plugged(mddev))
+ md_wakeup_thread(mddev->thread);
}
- spin_unlock_irqrestore(&conf->device_lock, flags);
- if (!plug)
- md_wakeup_thread(mddev->thread);
-
- if (!r10_bio->devs[i].repl_bio)
- continue;
-
- mbio = bio_clone_mddev(bio, GFP_NOIO, mddev);
- md_trim_bio(mbio, r10_bio->sector - bio->bi_sector,
- max_sectors);
- r10_bio->devs[i].repl_bio = mbio;
-
- /* We are actively writing to the original device
- * so it cannot disappear, so the replacement cannot
- * become NULL here
- */
- mbio->bi_sector = (r10_bio->devs[i].addr +
- choose_data_offset(
- r10_bio,
- conf->mirrors[d].replacement));
- mbio->bi_bdev = conf->mirrors[d].replacement->bdev;
- mbio->bi_end_io = raid10_end_write_request;
- mbio->bi_rw = WRITE | do_sync | do_fua | do_discard;
- mbio->bi_private = r10_bio;
-
- atomic_inc(&r10_bio->remaining);
- spin_lock_irqsave(&conf->device_lock, flags);
- bio_list_add(&conf->pending_bio_list, mbio);
- conf->pending_count++;
- spin_unlock_irqrestore(&conf->device_lock, flags);
- if (!mddev_check_plugged(mddev))
- md_wakeup_thread(mddev->thread);
}
/* Don't remove the bias on 'remaining' (one_write_done) until
@@ -1783,7 +1790,7 @@
clear_bit(Unmerged, &rdev->flags);
}
md_integrity_add_rdev(rdev, mddev);
- if (blk_queue_discard(bdev_get_queue(rdev->bdev)))
+ if (mddev->queue && blk_queue_discard(bdev_get_queue(rdev->bdev)))
queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, mddev->queue);
print_conf(conf);
@@ -3613,11 +3620,14 @@
discard_supported = true;
}
- if (discard_supported)
- queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, mddev->queue);
- else
- queue_flag_clear_unlocked(QUEUE_FLAG_DISCARD, mddev->queue);
-
+ if (mddev->queue) {
+ if (discard_supported)
+ queue_flag_set_unlocked(QUEUE_FLAG_DISCARD,
+ mddev->queue);
+ else
+ queue_flag_clear_unlocked(QUEUE_FLAG_DISCARD,
+ mddev->queue);
+ }
/* need to check that every block has at least one working mirror */
if (!enough(conf, -1)) {
printk(KERN_ERR "md/raid10:%s: not enough operational mirrors.\n",
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index c5439dc..a4502686 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -2774,10 +2774,12 @@
dev = &sh->dev[i];
if (!test_bit(R5_LOCKED, &dev->flags) &&
(test_bit(R5_UPTODATE, &dev->flags) ||
- test_and_clear_bit(R5_Discard, &dev->flags))) {
+ test_bit(R5_Discard, &dev->flags))) {
/* We can return any write requests */
struct bio *wbi, *wbi2;
pr_debug("Return write for disc %d\n", i);
+ if (test_and_clear_bit(R5_Discard, &dev->flags))
+ clear_bit(R5_UPTODATE, &dev->flags);
wbi = dev->written;
dev->written = NULL;
while (wbi && wbi->bi_sector <
@@ -2795,7 +2797,8 @@
!test_bit(STRIPE_DEGRADED, &sh->state),
0);
}
- }
+ } else if (test_bit(R5_Discard, &sh->dev[i].flags))
+ clear_bit(R5_Discard, &sh->dev[i].flags);
if (test_and_clear_bit(STRIPE_FULL_WRITE, &sh->state))
if (atomic_dec_and_test(&conf->pending_full_writes))
@@ -3490,40 +3493,6 @@
handle_failed_sync(conf, sh, &s);
}
- /*
- * might be able to return some write requests if the parity blocks
- * are safe, or on a failed drive
- */
- pdev = &sh->dev[sh->pd_idx];
- s.p_failed = (s.failed >= 1 && s.failed_num[0] == sh->pd_idx)
- || (s.failed >= 2 && s.failed_num[1] == sh->pd_idx);
- qdev = &sh->dev[sh->qd_idx];
- s.q_failed = (s.failed >= 1 && s.failed_num[0] == sh->qd_idx)
- || (s.failed >= 2 && s.failed_num[1] == sh->qd_idx)
- || conf->level < 6;
-
- if (s.written &&
- (s.p_failed || ((test_bit(R5_Insync, &pdev->flags)
- && !test_bit(R5_LOCKED, &pdev->flags)
- && (test_bit(R5_UPTODATE, &pdev->flags) ||
- test_bit(R5_Discard, &pdev->flags))))) &&
- (s.q_failed || ((test_bit(R5_Insync, &qdev->flags)
- && !test_bit(R5_LOCKED, &qdev->flags)
- && (test_bit(R5_UPTODATE, &qdev->flags) ||
- test_bit(R5_Discard, &qdev->flags))))))
- handle_stripe_clean_event(conf, sh, disks, &s.return_bi);
-
- /* Now we might consider reading some blocks, either to check/generate
- * parity, or to satisfy requests
- * or to load a block that is being partially written.
- */
- if (s.to_read || s.non_overwrite
- || (conf->level == 6 && s.to_write && s.failed)
- || (s.syncing && (s.uptodate + s.compute < disks))
- || s.replacing
- || s.expanding)
- handle_stripe_fill(sh, &s, disks);
-
/* Now we check to see if any write operations have recently
* completed
*/
@@ -3561,6 +3530,40 @@
s.dec_preread_active = 1;
}
+ /*
+ * might be able to return some write requests if the parity blocks
+ * are safe, or on a failed drive
+ */
+ pdev = &sh->dev[sh->pd_idx];
+ s.p_failed = (s.failed >= 1 && s.failed_num[0] == sh->pd_idx)
+ || (s.failed >= 2 && s.failed_num[1] == sh->pd_idx);
+ qdev = &sh->dev[sh->qd_idx];
+ s.q_failed = (s.failed >= 1 && s.failed_num[0] == sh->qd_idx)
+ || (s.failed >= 2 && s.failed_num[1] == sh->qd_idx)
+ || conf->level < 6;
+
+ if (s.written &&
+ (s.p_failed || ((test_bit(R5_Insync, &pdev->flags)
+ && !test_bit(R5_LOCKED, &pdev->flags)
+ && (test_bit(R5_UPTODATE, &pdev->flags) ||
+ test_bit(R5_Discard, &pdev->flags))))) &&
+ (s.q_failed || ((test_bit(R5_Insync, &qdev->flags)
+ && !test_bit(R5_LOCKED, &qdev->flags)
+ && (test_bit(R5_UPTODATE, &qdev->flags) ||
+ test_bit(R5_Discard, &qdev->flags))))))
+ handle_stripe_clean_event(conf, sh, disks, &s.return_bi);
+
+ /* Now we might consider reading some blocks, either to check/generate
+ * parity, or to satisfy requests
+ * or to load a block that is being partially written.
+ */
+ if (s.to_read || s.non_overwrite
+ || (conf->level == 6 && s.to_write && s.failed)
+ || (s.syncing && (s.uptodate + s.compute < disks))
+ || s.replacing
+ || s.expanding)
+ handle_stripe_fill(sh, &s, disks);
+
/* Now to consider new write requests and what else, if anything
* should be read. We do not handle new writes when:
* 1/ A 'write' operation (copy+xor) is already in flight.
@@ -5529,6 +5532,10 @@
* discard data disk but write parity disk
*/
stripe = stripe * PAGE_SIZE;
+ /* Round up to power of 2, as discard handling
+ * currently assumes that */
+ while ((stripe-1) & stripe)
+ stripe = (stripe | (stripe-1)) + 1;
mddev->queue->limits.discard_alignment = stripe;
mddev->queue->limits.discard_granularity = stripe;
/*
diff --git a/drivers/media/platform/omap/omap_vout.c b/drivers/media/platform/omap/omap_vout.c
index a3b1a34..4b1becc 100644
--- a/drivers/media/platform/omap/omap_vout.c
+++ b/drivers/media/platform/omap/omap_vout.c
@@ -45,8 +45,8 @@
#include <media/v4l2-ioctl.h>
#include <plat/cpu.h>
-#include <plat/dma.h>
-#include <plat/vrfb.h>
+#include <plat-omap/dma-omap.h>
+#include <video/omapvrfb.h>
#include <video/omapdss.h>
#include "omap_voutlib.h"
diff --git a/drivers/media/platform/omap/omap_vout_vrfb.c b/drivers/media/platform/omap/omap_vout_vrfb.c
index 4be26abf6c..8340445 100644
--- a/drivers/media/platform/omap/omap_vout_vrfb.c
+++ b/drivers/media/platform/omap/omap_vout_vrfb.c
@@ -16,12 +16,14 @@
#include <media/videobuf-dma-contig.h>
#include <media/v4l2-device.h>
-#include <plat/dma.h>
-#include <plat/vrfb.h>
+#include <plat-omap/dma-omap.h>
+#include <video/omapvrfb.h>
#include "omap_voutdef.h"
#include "omap_voutlib.h"
+#define OMAP_DMA_NO_DEVICE 0
+
/*
* Function for allocating video buffers
*/
diff --git a/drivers/media/platform/omap/omap_voutdef.h b/drivers/media/platform/omap/omap_voutdef.h
index 27a95d2..9ccfe1f 100644
--- a/drivers/media/platform/omap/omap_voutdef.h
+++ b/drivers/media/platform/omap/omap_voutdef.h
@@ -12,7 +12,7 @@
#define OMAP_VOUTDEF_H
#include <video/omapdss.h>
-#include <plat/vrfb.h>
+#include <video/omapvrfb.h>
#define YUYV_BPP 2
#define RGB565_BPP 2
diff --git a/drivers/media/platform/omap3isp/isphist.c b/drivers/media/platform/omap3isp/isphist.c
index d1a8dee..e7f9c42 100644
--- a/drivers/media/platform/omap3isp/isphist.c
+++ b/drivers/media/platform/omap3isp/isphist.c
@@ -34,6 +34,8 @@
#include "ispreg.h"
#include "isphist.h"
+#define OMAP24XX_DMA_NO_DEVICE 0
+
#define HIST_CONFIG_DMA 1
#define HIST_USING_DMA(hist) ((hist)->dma_ch >= 0)
diff --git a/drivers/media/platform/omap3isp/ispstat.h b/drivers/media/platform/omap3isp/ispstat.h
index a6fe653..40f87cd 100644
--- a/drivers/media/platform/omap3isp/ispstat.h
+++ b/drivers/media/platform/omap3isp/ispstat.h
@@ -30,7 +30,7 @@
#include <linux/types.h>
#include <linux/omap3isp.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
#include <media/v4l2-event.h>
#include "isp.h"
diff --git a/drivers/media/platform/omap3isp/ispvideo.c b/drivers/media/platform/omap3isp/ispvideo.c
index a0b737fe..5bd40e6 100644
--- a/drivers/media/platform/omap3isp/ispvideo.c
+++ b/drivers/media/platform/omap3isp/ispvideo.c
@@ -36,7 +36,6 @@
#include <media/v4l2-ioctl.h>
#include <plat/iommu.h>
#include <plat/iovmm.h>
-#include <plat/omap-pm.h>
#include "ispvideo.h"
#include "isp.h"
diff --git a/drivers/media/platform/soc_camera/mx2_camera.c b/drivers/media/platform/soc_camera/mx2_camera.c
index 9fd9d1c..e575ae8 100644
--- a/drivers/media/platform/soc_camera/mx2_camera.c
+++ b/drivers/media/platform/soc_camera/mx2_camera.c
@@ -41,7 +41,6 @@
#include <linux/videodev2.h>
#include <linux/platform_data/camera-mx2.h>
-#include <mach/hardware.h>
#include <asm/dma.h>
@@ -121,11 +120,13 @@
#define CSICR1 0x00
#define CSICR2 0x04
-#define CSISR (cpu_is_mx27() ? 0x08 : 0x18)
+#define CSISR_IMX25 0x18
+#define CSISR_IMX27 0x08
#define CSISTATFIFO 0x0c
#define CSIRFIFO 0x10
#define CSIRXCNT 0x14
-#define CSICR3 (cpu_is_mx27() ? 0x1C : 0x08)
+#define CSICR3_IMX25 0x08
+#define CSICR3_IMX27 0x1c
#define CSIDMASA_STATFIFO 0x20
#define CSIDMATA_STATFIFO 0x24
#define CSIDMASA_FB1 0x28
@@ -268,6 +269,11 @@
struct mx2_buf_internal internal;
};
+enum mx2_camera_type {
+ IMX25_CAMERA,
+ IMX27_CAMERA,
+};
+
struct mx2_camera_dev {
struct device *dev;
struct soc_camera_host soc_host;
@@ -291,6 +297,9 @@
struct mx2_buffer *fb2_active;
u32 csicr1;
+ u32 reg_csisr;
+ u32 reg_csicr3;
+ enum mx2_camera_type devtype;
struct mx2_buf_internal buf_discard[2];
void *discard_buffer;
@@ -303,6 +312,29 @@
struct vb2_alloc_ctx *alloc_ctx;
};
+static struct platform_device_id mx2_camera_devtype[] = {
+ {
+ .name = "imx25-camera",
+ .driver_data = IMX25_CAMERA,
+ }, {
+ .name = "imx27-camera",
+ .driver_data = IMX27_CAMERA,
+ }, {
+ /* sentinel */
+ }
+};
+MODULE_DEVICE_TABLE(platform, mx2_camera_devtype);
+
+static inline int is_imx25_camera(struct mx2_camera_dev *pcdev)
+{
+ return pcdev->devtype == IMX25_CAMERA;
+}
+
+static inline int is_imx27_camera(struct mx2_camera_dev *pcdev)
+{
+ return pcdev->devtype == IMX27_CAMERA;
+}
+
static struct mx2_buffer *mx2_ibuf_to_buf(struct mx2_buf_internal *int_buf)
{
return container_of(int_buf, struct mx2_buffer, internal);
@@ -434,9 +466,9 @@
clk_disable_unprepare(pcdev->clk_csi);
writel(0, pcdev->base_csi + CSICR1);
- if (cpu_is_mx27()) {
+ if (is_imx27_camera(pcdev)) {
writel(0, pcdev->base_emma + PRP_CNTL);
- } else if (cpu_is_mx25()) {
+ } else if (is_imx25_camera(pcdev)) {
spin_lock_irqsave(&pcdev->lock, flags);
pcdev->fb1_active = NULL;
pcdev->fb2_active = NULL;
@@ -466,7 +498,7 @@
csicr1 = CSICR1_MCLKEN;
- if (cpu_is_mx27())
+ if (is_imx27_camera(pcdev))
csicr1 |= CSICR1_PRP_IF_EN | CSICR1_FCC |
CSICR1_RXFF_LEVEL(0);
@@ -542,7 +574,7 @@
static irqreturn_t mx25_camera_irq(int irq_csi, void *data)
{
struct mx2_camera_dev *pcdev = data;
- u32 status = readl(pcdev->base_csi + CSISR);
+ u32 status = readl(pcdev->base_csi + pcdev->reg_csisr);
if (status & CSISR_DMA_TSF_FB1_INT)
mx25_camera_frame_done(pcdev, 1, MX2_STATE_DONE);
@@ -551,7 +583,7 @@
/* FIXME: handle CSISR_RFF_OR_INT */
- writel(status, pcdev->base_csi + CSISR);
+ writel(status, pcdev->base_csi + pcdev->reg_csisr);
return IRQ_HANDLED;
}
@@ -636,7 +668,7 @@
buf->state = MX2_STATE_QUEUED;
list_add_tail(&buf->internal.queue, &pcdev->capture);
- if (cpu_is_mx25()) {
+ if (is_imx25_camera(pcdev)) {
u32 csicr3, dma_inten = 0;
if (pcdev->fb1_active == NULL) {
@@ -655,20 +687,20 @@
list_del(&buf->internal.queue);
buf->state = MX2_STATE_ACTIVE;
- csicr3 = readl(pcdev->base_csi + CSICR3);
+ csicr3 = readl(pcdev->base_csi + pcdev->reg_csicr3);
/* Reflash DMA */
writel(csicr3 | CSICR3_DMA_REFLASH_RFF,
- pcdev->base_csi + CSICR3);
+ pcdev->base_csi + pcdev->reg_csicr3);
/* clear & enable interrupts */
- writel(dma_inten, pcdev->base_csi + CSISR);
+ writel(dma_inten, pcdev->base_csi + pcdev->reg_csisr);
pcdev->csicr1 |= dma_inten;
writel(pcdev->csicr1, pcdev->base_csi + CSICR1);
/* enable DMA */
csicr3 |= CSICR3_DMA_REQ_EN_RFF | CSICR3_RXFF_LEVEL(1);
- writel(csicr3, pcdev->base_csi + CSICR3);
+ writel(csicr3, pcdev->base_csi + pcdev->reg_csicr3);
}
}
@@ -712,7 +744,7 @@
*/
spin_lock_irqsave(&pcdev->lock, flags);
- if (cpu_is_mx25() && buf->state == MX2_STATE_ACTIVE) {
+ if (is_imx25_camera(pcdev) && buf->state == MX2_STATE_ACTIVE) {
if (pcdev->fb1_active == buf) {
pcdev->csicr1 &= ~CSICR1_FB1_DMA_INTEN;
writel(0, pcdev->base_csi + CSIDMASA_FB1);
@@ -835,7 +867,7 @@
unsigned long phys;
int bytesperline;
- if (cpu_is_mx27()) {
+ if (is_imx27_camera(pcdev)) {
unsigned long flags;
if (count < 2)
return -EINVAL;
@@ -930,7 +962,7 @@
void *b;
u32 cntl;
- if (cpu_is_mx27()) {
+ if (is_imx27_camera(pcdev)) {
spin_lock_irqsave(&pcdev->lock, flags);
cntl = readl(pcdev->base_emma + PRP_CNTL);
@@ -1082,11 +1114,11 @@
if (bytesperline < 0)
return bytesperline;
- if (cpu_is_mx27()) {
+ if (is_imx27_camera(pcdev)) {
ret = mx27_camera_emma_prp_reset(pcdev);
if (ret)
return ret;
- } else if (cpu_is_mx25()) {
+ } else if (is_imx25_camera(pcdev)) {
writel((bytesperline * icd->user_height) >> 2,
pcdev->base_csi + CSIRXCNT);
writel((bytesperline << 16) | icd->user_height,
@@ -1392,7 +1424,7 @@
/* FIXME: implement MX27 limits */
/* limit to MX25 hardware capabilities */
- if (cpu_is_mx25()) {
+ if (is_imx25_camera(pcdev)) {
if (xlate->host_fmt->bits_per_sample <= 8)
width_limit = 0xffff * 4;
else
@@ -1726,6 +1758,20 @@
goto exit;
}
+ pcdev->devtype = pdev->id_entry->driver_data;
+ switch (pcdev->devtype) {
+ case IMX25_CAMERA:
+ pcdev->reg_csisr = CSISR_IMX25;
+ pcdev->reg_csicr3 = CSICR3_IMX25;
+ break;
+ case IMX27_CAMERA:
+ pcdev->reg_csisr = CSISR_IMX27;
+ pcdev->reg_csicr3 = CSICR3_IMX27;
+ break;
+ default:
+ break;
+ }
+
pcdev->clk_csi = devm_clk_get(&pdev->dev, "ahb");
if (IS_ERR(pcdev->clk_csi)) {
dev_err(&pdev->dev, "Could not get csi clock\n");
@@ -1763,7 +1809,7 @@
pcdev->dev = &pdev->dev;
platform_set_drvdata(pdev, pcdev);
- if (cpu_is_mx25()) {
+ if (is_imx25_camera(pcdev)) {
err = devm_request_irq(&pdev->dev, irq_csi, mx25_camera_irq, 0,
MX2_CAM_DRV_NAME, pcdev);
if (err) {
@@ -1772,7 +1818,7 @@
}
}
- if (cpu_is_mx27()) {
+ if (is_imx27_camera(pcdev)) {
err = mx27_camera_emma_init(pdev);
if (err)
goto exit;
@@ -1789,7 +1835,7 @@
pcdev->soc_host.priv = pcdev;
pcdev->soc_host.v4l2_dev.dev = &pdev->dev;
pcdev->soc_host.nr = pdev->id;
- if (cpu_is_mx25())
+ if (is_imx25_camera(pcdev))
pcdev->soc_host.capabilities = SOCAM_HOST_CAP_STRIDE;
pcdev->alloc_ctx = vb2_dma_contig_init_ctx(&pdev->dev);
@@ -1809,7 +1855,7 @@
exit_free_emma:
vb2_dma_contig_cleanup_ctx(pcdev->alloc_ctx);
eallocctx:
- if (cpu_is_mx27()) {
+ if (is_imx27_camera(pcdev)) {
clk_disable_unprepare(pcdev->clk_emma_ipg);
clk_disable_unprepare(pcdev->clk_emma_ahb);
}
@@ -1827,7 +1873,7 @@
vb2_dma_contig_cleanup_ctx(pcdev->alloc_ctx);
- if (cpu_is_mx27()) {
+ if (is_imx27_camera(pcdev)) {
clk_disable_unprepare(pcdev->clk_emma_ipg);
clk_disable_unprepare(pcdev->clk_emma_ahb);
}
@@ -1841,6 +1887,7 @@
.driver = {
.name = MX2_CAM_DRV_NAME,
},
+ .id_table = mx2_camera_devtype,
.remove = __devexit_p(mx2_camera_remove),
};
diff --git a/drivers/media/platform/soc_camera/mx3_camera.c b/drivers/media/platform/soc_camera/mx3_camera.c
index 3557ac9..64d39b1 100644
--- a/drivers/media/platform/soc_camera/mx3_camera.c
+++ b/drivers/media/platform/soc_camera/mx3_camera.c
@@ -17,6 +17,7 @@
#include <linux/vmalloc.h>
#include <linux/interrupt.h>
#include <linux/sched.h>
+#include <linux/dma/ipu-dma.h>
#include <media/v4l2-common.h>
#include <media/v4l2-dev.h>
@@ -24,7 +25,6 @@
#include <media/soc_camera.h>
#include <media/soc_mediabus.h>
-#include <mach/ipu.h>
#include <linux/platform_data/camera-mx3.h>
#include <linux/platform_data/dma-imx.h>
diff --git a/drivers/media/platform/soc_camera/omap1_camera.c b/drivers/media/platform/soc_camera/omap1_camera.c
index fa08c76..cae9ce6 100644
--- a/drivers/media/platform/soc_camera/omap1_camera.c
+++ b/drivers/media/platform/soc_camera/omap1_camera.c
@@ -34,12 +34,13 @@
#include <media/videobuf-dma-contig.h>
#include <media/videobuf-dma-sg.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
#define DRIVER_NAME "omap1-camera"
#define DRIVER_VERSION "0.0.2"
+#define OMAP_DMA_CAMERA_IF_RX 20
/*
* ---------------------------------------------------------------------------
diff --git a/drivers/media/rc/ir-rx51.c b/drivers/media/rc/ir-rx51.c
index 546199e..82e6c1e 100644
--- a/drivers/media/rc/ir-rx51.c
+++ b/drivers/media/rc/ir-rx51.c
@@ -28,7 +28,6 @@
#include <plat/dmtimer.h>
#include <plat/clock.h>
-#include <plat/omap-pm.h>
#include <media/lirc.h>
#include <media/lirc_dev.h>
diff --git a/drivers/mfd/menelaus.c b/drivers/mfd/menelaus.c
index 55d58998..998ce8c 100644
--- a/drivers/mfd/menelaus.c
+++ b/drivers/mfd/menelaus.c
@@ -41,11 +41,11 @@
#include <linux/rtc.h>
#include <linux/bcd.h>
#include <linux/slab.h>
+#include <linux/mfd/menelaus.h>
#include <asm/mach/irq.h>
#include <asm/gpio.h>
-#include <plat/menelaus.h>
#define DRIVER_NAME "menelaus"
diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
index 23cec57..cebfe0a 100644
--- a/drivers/mfd/omap-usb-host.c
+++ b/drivers/mfd/omap-usb-host.c
@@ -26,9 +26,12 @@
#include <linux/spinlock.h>
#include <linux/gpio.h>
#include <plat/cpu.h>
-#include <plat/usb.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/usb-omap.h>
#include <linux/pm_runtime.h>
+#include "omap-usb.h"
+
#define USBHS_DRIVER_NAME "usbhs_omap"
#define OMAP_EHCI_DEVICE "ehci-omap"
#define OMAP_OHCI_DEVICE "ohci-omap3"
diff --git a/drivers/mfd/omap-usb-tll.c b/drivers/mfd/omap-usb-tll.c
index 4b7757b..0db0dfa 100644
--- a/drivers/mfd/omap-usb-tll.c
+++ b/drivers/mfd/omap-usb-tll.c
@@ -25,8 +25,8 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/err.h>
-#include <plat/usb.h>
#include <linux/pm_runtime.h>
+#include <linux/platform_data/usb-omap.h>
#define USBTLL_DRIVER_NAME "usbhs_tll"
diff --git a/drivers/mfd/omap-usb.h b/drivers/mfd/omap-usb.h
new file mode 100644
index 0000000..972aa96
--- /dev/null
+++ b/drivers/mfd/omap-usb.h
@@ -0,0 +1,2 @@
+extern int omap_tll_enable(void);
+extern int omap_tll_disable(void);
diff --git a/drivers/mmc/host/dw_mmc-exynos.c b/drivers/mmc/host/dw_mmc-exynos.c
index 660bbc5..4d50da6 100644
--- a/drivers/mmc/host/dw_mmc-exynos.c
+++ b/drivers/mmc/host/dw_mmc-exynos.c
@@ -208,7 +208,7 @@
MMC_CAP_CMD23,
};
-static struct dw_mci_drv_data exynos5250_drv_data = {
+static const struct dw_mci_drv_data exynos5250_drv_data = {
.caps = exynos5250_dwmmc_caps,
.init = dw_mci_exynos_priv_init,
.setup_clock = dw_mci_exynos_setup_clock,
@@ -220,14 +220,14 @@
static const struct of_device_id dw_mci_exynos_match[] = {
{ .compatible = "samsung,exynos5250-dw-mshc",
- .data = (void *)&exynos5250_drv_data, },
+ .data = &exynos5250_drv_data, },
{},
};
-MODULE_DEVICE_TABLE(of, dw_mci_pltfm_match);
+MODULE_DEVICE_TABLE(of, dw_mci_exynos_match);
int dw_mci_exynos_probe(struct platform_device *pdev)
{
- struct dw_mci_drv_data *drv_data;
+ const struct dw_mci_drv_data *drv_data;
const struct of_device_id *match;
match = of_match_node(dw_mci_exynos_match, pdev->dev.of_node);
diff --git a/drivers/mmc/host/dw_mmc-pltfm.c b/drivers/mmc/host/dw_mmc-pltfm.c
index c960ca7..917936b 100644
--- a/drivers/mmc/host/dw_mmc-pltfm.c
+++ b/drivers/mmc/host/dw_mmc-pltfm.c
@@ -24,7 +24,7 @@
#include "dw_mmc.h"
int dw_mci_pltfm_register(struct platform_device *pdev,
- struct dw_mci_drv_data *drv_data)
+ const struct dw_mci_drv_data *drv_data)
{
struct dw_mci *host;
struct resource *regs;
@@ -50,8 +50,8 @@
if (!host->regs)
return -ENOMEM;
- if (host->drv_data->init) {
- ret = host->drv_data->init(host);
+ if (drv_data && drv_data->init) {
+ ret = drv_data->init(host);
if (ret)
return ret;
}
diff --git a/drivers/mmc/host/dw_mmc-pltfm.h b/drivers/mmc/host/dw_mmc-pltfm.h
index 301f245..2ac37b8 100644
--- a/drivers/mmc/host/dw_mmc-pltfm.h
+++ b/drivers/mmc/host/dw_mmc-pltfm.h
@@ -13,7 +13,7 @@
#define _DW_MMC_PLTFM_H_
extern int dw_mci_pltfm_register(struct platform_device *pdev,
- struct dw_mci_drv_data *drv_data);
+ const struct dw_mci_drv_data *drv_data);
extern int __devexit dw_mci_pltfm_remove(struct platform_device *pdev);
extern const struct dev_pm_ops dw_mci_pltfm_pmops;
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index c2828f3..c0667c8 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -232,6 +232,7 @@
{
struct mmc_data *data;
struct dw_mci_slot *slot = mmc_priv(mmc);
+ struct dw_mci_drv_data *drv_data = slot->host->drv_data;
u32 cmdr;
cmd->error = -EINPROGRESS;
@@ -261,8 +262,8 @@
cmdr |= SDMMC_CMD_DAT_WR;
}
- if (slot->host->drv_data->prepare_command)
- slot->host->drv_data->prepare_command(slot->host, &cmdr);
+ if (drv_data && drv_data->prepare_command)
+ drv_data->prepare_command(slot->host, &cmdr);
return cmdr;
}
@@ -434,7 +435,7 @@
return 0;
}
-static struct dw_mci_dma_ops dw_mci_idmac_ops = {
+static const struct dw_mci_dma_ops dw_mci_idmac_ops = {
.init = dw_mci_idmac_init,
.start = dw_mci_idmac_start_dma,
.stop = dw_mci_idmac_stop_dma,
@@ -772,6 +773,7 @@
static void dw_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
{
struct dw_mci_slot *slot = mmc_priv(mmc);
+ struct dw_mci_drv_data *drv_data = slot->host->drv_data;
u32 regs;
/* set default 1 bit mode */
@@ -807,8 +809,8 @@
slot->clock = ios->clock;
}
- if (slot->host->drv_data->set_ios)
- slot->host->drv_data->set_ios(slot->host, ios);
+ if (drv_data && drv_data->set_ios)
+ drv_data->set_ios(slot->host, ios);
switch (ios->power_mode) {
case MMC_POWER_UP:
@@ -1815,6 +1817,7 @@
{
struct mmc_host *mmc;
struct dw_mci_slot *slot;
+ struct dw_mci_drv_data *drv_data = host->drv_data;
int ctrl_id, ret;
u8 bus_width;
@@ -1854,8 +1857,8 @@
} else {
ctrl_id = to_platform_device(host->dev)->id;
}
- if (host->drv_data && host->drv_data->caps)
- mmc->caps |= host->drv_data->caps[ctrl_id];
+ if (drv_data && drv_data->caps)
+ mmc->caps |= drv_data->caps[ctrl_id];
if (host->pdata->caps2)
mmc->caps2 = host->pdata->caps2;
@@ -1867,10 +1870,10 @@
else
bus_width = 1;
- if (host->drv_data->setup_bus) {
+ if (drv_data && drv_data->setup_bus) {
struct device_node *slot_np;
slot_np = dw_mci_of_find_slot_node(host->dev, slot->id);
- ret = host->drv_data->setup_bus(host, slot_np, bus_width);
+ ret = drv_data->setup_bus(host, slot_np, bus_width);
if (ret)
goto err_setup_bus;
}
@@ -1968,7 +1971,7 @@
/* Determine which DMA interface to use */
#ifdef CONFIG_MMC_DW_IDMAC
host->dma_ops = &dw_mci_idmac_ops;
- dev_info(&host->dev, "Using internal DMA controller.\n");
+ dev_info(host->dev, "Using internal DMA controller.\n");
#endif
if (!host->dma_ops)
@@ -2035,6 +2038,7 @@
struct dw_mci_board *pdata;
struct device *dev = host->dev;
struct device_node *np = dev->of_node;
+ struct dw_mci_drv_data *drv_data = host->drv_data;
int idx, ret;
pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
@@ -2062,8 +2066,8 @@
of_property_read_u32(np, "card-detect-delay", &pdata->detect_delay_ms);
- if (host->drv_data->parse_dt) {
- ret = host->drv_data->parse_dt(host);
+ if (drv_data && drv_data->parse_dt) {
+ ret = drv_data->parse_dt(host);
if (ret)
return ERR_PTR(ret);
}
@@ -2080,6 +2084,7 @@
int dw_mci_probe(struct dw_mci *host)
{
+ struct dw_mci_drv_data *drv_data = host->drv_data;
int width, i, ret = 0;
u32 fifo_size;
int init_slots = 0;
@@ -2127,8 +2132,8 @@
else
host->bus_hz = clk_get_rate(host->ciu_clk);
- if (host->drv_data->setup_clock) {
- ret = host->drv_data->setup_clock(host);
+ if (drv_data && drv_data->setup_clock) {
+ ret = drv_data->setup_clock(host);
if (ret) {
dev_err(host->dev,
"implementation specific clock setup failed\n");
@@ -2228,6 +2233,21 @@
else
host->num_slots = ((mci_readl(host, HCON) >> 1) & 0x1F) + 1;
+ /*
+ * Enable interrupts for command done, data over, data empty, card det,
+ * receive ready and error such as transmit, receive timeout, crc error
+ */
+ mci_writel(host, RINTSTS, 0xFFFFFFFF);
+ mci_writel(host, INTMASK, SDMMC_INT_CMD_DONE | SDMMC_INT_DATA_OVER |
+ SDMMC_INT_TXDR | SDMMC_INT_RXDR |
+ DW_MCI_ERROR_FLAGS | SDMMC_INT_CD);
+ mci_writel(host, CTRL, SDMMC_CTRL_INT_ENABLE); /* Enable mci interrupt */
+
+ dev_info(host->dev, "DW MMC controller at irq %d, "
+ "%d bit host data width, "
+ "%u deep fifo\n",
+ host->irq, width, fifo_size);
+
/* We need at least one slot to succeed */
for (i = 0; i < host->num_slots; i++) {
ret = dw_mci_init_slot(host, i);
@@ -2257,20 +2277,6 @@
else
host->data_offset = DATA_240A_OFFSET;
- /*
- * Enable interrupts for command done, data over, data empty, card det,
- * receive ready and error such as transmit, receive timeout, crc error
- */
- mci_writel(host, RINTSTS, 0xFFFFFFFF);
- mci_writel(host, INTMASK, SDMMC_INT_CMD_DONE | SDMMC_INT_DATA_OVER |
- SDMMC_INT_TXDR | SDMMC_INT_RXDR |
- DW_MCI_ERROR_FLAGS | SDMMC_INT_CD);
- mci_writel(host, CTRL, SDMMC_CTRL_INT_ENABLE); /* Enable mci interrupt */
-
- dev_info(host->dev, "DW MMC controller at irq %d, "
- "%d bit host data width, "
- "%u deep fifo\n",
- host->irq, width, fifo_size);
if (host->quirks & DW_MCI_QUIRK_IDMAC_DTO)
dev_info(host->dev, "Internal DMAC interrupt fix enabled.\n");
diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c
index 565c2e4..477f63b 100644
--- a/drivers/mmc/host/mxcmmc.c
+++ b/drivers/mmc/host/mxcmmc.c
@@ -41,7 +41,6 @@
#include <linux/platform_data/mmc-mxcmmc.h>
#include <linux/platform_data/dma-imx.h>
-#include <mach/hardware.h>
#define DRIVER_NAME "mxc-mmc"
#define MXCMCI_TIMEOUT_MS 10000
@@ -113,6 +112,11 @@
#define INT_WRITE_OP_DONE_EN (1 << 1)
#define INT_READ_OP_EN (1 << 0)
+enum mxcmci_type {
+ IMX21_MMC,
+ IMX31_MMC,
+};
+
struct mxcmci_host {
struct mmc_host *mmc;
struct resource *res;
@@ -153,8 +157,27 @@
struct imx_dma_data dma_data;
struct timer_list watchdog;
+ enum mxcmci_type devtype;
};
+static struct platform_device_id mxcmci_devtype[] = {
+ {
+ .name = "imx21-mmc",
+ .driver_data = IMX21_MMC,
+ }, {
+ .name = "imx31-mmc",
+ .driver_data = IMX31_MMC,
+ }, {
+ /* sentinel */
+ }
+};
+MODULE_DEVICE_TABLE(platform, mxcmci_devtype);
+
+static inline int is_imx31_mmc(struct mxcmci_host *host)
+{
+ return host->devtype == IMX31_MMC;
+}
+
static void mxcmci_set_clk_rate(struct mxcmci_host *host, unsigned int clk_ios);
static inline void mxcmci_init_ocr(struct mxcmci_host *host)
@@ -843,6 +866,8 @@
static void mxcmci_init_card(struct mmc_host *host, struct mmc_card *card)
{
+ struct mxcmci_host *mxcmci = mmc_priv(host);
+
/*
* MX3 SoCs have a silicon bug which corrupts CRC calculation of
* multi-block transfers when connected SDIO peripheral doesn't
@@ -850,7 +875,7 @@
* One way to prevent this is to only allow 1-bit transfers.
*/
- if (cpu_is_mx3() && card->type == MMC_TYPE_SDIO)
+ if (is_imx31_mmc(mxcmci) && card->type == MMC_TYPE_SDIO)
host->caps &= ~MMC_CAP_4_BIT_DATA;
else
host->caps |= MMC_CAP_4_BIT_DATA;
@@ -948,6 +973,7 @@
host->mmc = mmc;
host->pdata = pdev->dev.platform_data;
+ host->devtype = pdev->id_entry->driver_data;
spin_lock_init(&host->lock);
mxcmci_init_ocr(host);
@@ -1120,6 +1146,7 @@
static struct platform_driver mxcmci_driver = {
.probe = mxcmci_probe,
.remove = mxcmci_remove,
+ .id_table = mxcmci_devtype,
.driver = {
.name = DRIVER_NAME,
.owner = THIS_MODULE,
@@ -1134,4 +1161,4 @@
MODULE_DESCRIPTION("i.MX Multimedia Card Interface Driver");
MODULE_AUTHOR("Sascha Hauer, Pengutronix");
MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:imx-mmc");
+MODULE_ALIAS("platform:mxc-mmc");
diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
index 48ad361..ae115c0 100644
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -28,9 +28,8 @@
#include <linux/clk.h>
#include <linux/scatterlist.h>
#include <linux/slab.h>
+#include <linux/platform_data/mmc-omap.h>
-#include <plat/mmc.h>
-#include <plat/dma.h>
#define OMAP_MMC_REG_CMD 0x00
#define OMAP_MMC_REG_ARGL 0x01
@@ -72,6 +71,13 @@
#define OMAP_MMC_STAT_CARD_BUSY (1 << 2)
#define OMAP_MMC_STAT_END_OF_CMD (1 << 0)
+#define mmc_omap7xx() (host->features & MMC_OMAP7XX)
+#define mmc_omap15xx() (host->features & MMC_OMAP15XX)
+#define mmc_omap16xx() (host->features & MMC_OMAP16XX)
+#define MMC_OMAP1_MASK (MMC_OMAP7XX | MMC_OMAP15XX | MMC_OMAP16XX)
+#define mmc_omap1() (host->features & MMC_OMAP1_MASK)
+#define mmc_omap2() (!mmc_omap1())
+
#define OMAP_MMC_REG(host, reg) (OMAP_MMC_REG_##reg << (host)->reg_shift)
#define OMAP_MMC_READ(host, reg) __raw_readw((host)->virt_base + OMAP_MMC_REG(host, reg))
#define OMAP_MMC_WRITE(host, reg, val) __raw_writew((val), (host)->virt_base + OMAP_MMC_REG(host, reg))
@@ -84,6 +90,16 @@
#define OMAP_MMC_CMDTYPE_AC 2
#define OMAP_MMC_CMDTYPE_ADTC 3
+#define OMAP_DMA_MMC_TX 21
+#define OMAP_DMA_MMC_RX 22
+#define OMAP_DMA_MMC2_TX 54
+#define OMAP_DMA_MMC2_RX 55
+
+#define OMAP24XX_DMA_MMC2_TX 47
+#define OMAP24XX_DMA_MMC2_RX 48
+#define OMAP24XX_DMA_MMC1_TX 61
+#define OMAP24XX_DMA_MMC1_RX 62
+
#define DRIVER_NAME "mmci-omap"
@@ -147,6 +163,7 @@
u32 buffer_bytes_left;
u32 total_bytes_left;
+ unsigned features;
unsigned use_dma:1;
unsigned brs_received:1, dma_done:1;
unsigned dma_in_use:1;
@@ -988,7 +1005,7 @@
* blocksize is at least that large. Blocksize is
* usually 512 bytes; but not for some SD reads.
*/
- burst = cpu_is_omap15xx() ? 32 : 64;
+ burst = mmc_omap15xx() ? 32 : 64;
if (burst > data->blksz)
burst = data->blksz;
@@ -1104,8 +1121,7 @@
if (slot->pdata->set_power != NULL)
slot->pdata->set_power(mmc_dev(slot->mmc), slot->id, power_on,
vdd);
-
- if (cpu_is_omap24xx()) {
+ if (mmc_omap2()) {
u16 w;
if (power_on) {
@@ -1239,7 +1255,7 @@
mmc->ops = &mmc_omap_ops;
mmc->f_min = 400000;
- if (cpu_class_is_omap2())
+ if (mmc_omap2())
mmc->f_max = 48000000;
else
mmc->f_max = 24000000;
@@ -1359,6 +1375,7 @@
init_waitqueue_head(&host->slot_wq);
host->pdata = pdata;
+ host->features = host->pdata->slots[0].features;
host->dev = &pdev->dev;
platform_set_drvdata(pdev, host);
@@ -1391,7 +1408,7 @@
host->dma_tx_burst = -1;
host->dma_rx_burst = -1;
- if (cpu_is_omap24xx())
+ if (mmc_omap2())
sig = host->id == 0 ? OMAP24XX_DMA_MMC1_TX : OMAP24XX_DMA_MMC2_TX;
else
sig = host->id == 0 ? OMAP_DMA_MMC_TX : OMAP_DMA_MMC2_TX;
@@ -1407,7 +1424,7 @@
dev_warn(host->dev, "unable to obtain TX DMA engine channel %u\n",
sig);
#endif
- if (cpu_is_omap24xx())
+ if (mmc_omap2())
sig = host->id == 0 ? OMAP24XX_DMA_MMC1_RX : OMAP24XX_DMA_MMC2_RX;
else
sig = host->id == 0 ? OMAP_DMA_MMC_RX : OMAP_DMA_MMC2_RX;
@@ -1435,7 +1452,7 @@
}
host->nr_slots = pdata->nr_slots;
- host->reg_shift = (cpu_is_omap7xx() ? 1 : 2);
+ host->reg_shift = (mmc_omap7xx() ? 1 : 2);
host->mmc_omap_wq = alloc_workqueue("mmc_omap", 0, 0);
if (!host->mmc_omap_wq)
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 54bfd0c..e7c1852 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -38,9 +38,7 @@
#include <linux/gpio.h>
#include <linux/regulator/consumer.h>
#include <linux/pm_runtime.h>
-#include <mach/hardware.h>
-#include <plat/mmc.h>
-#include <plat/cpu.h>
+#include <linux/platform_data/mmc-omap.h>
/* OMAP HSMMC Host Controller Registers */
#define OMAP_HSMMC_SYSSTATUS 0x0014
@@ -178,7 +176,8 @@
static int omap_hsmmc_card_detect(struct device *dev, int slot)
{
- struct omap_mmc_platform_data *mmc = dev->platform_data;
+ struct omap_hsmmc_host *host = dev_get_drvdata(dev);
+ struct omap_mmc_platform_data *mmc = host->pdata;
/* NOTE: assumes card detect signal is active-low */
return !gpio_get_value_cansleep(mmc->slots[0].switch_pin);
@@ -186,7 +185,8 @@
static int omap_hsmmc_get_wp(struct device *dev, int slot)
{
- struct omap_mmc_platform_data *mmc = dev->platform_data;
+ struct omap_hsmmc_host *host = dev_get_drvdata(dev);
+ struct omap_mmc_platform_data *mmc = host->pdata;
/* NOTE: assumes write protect signal is active-high */
return gpio_get_value_cansleep(mmc->slots[0].gpio_wp);
@@ -194,7 +194,8 @@
static int omap_hsmmc_get_cover_state(struct device *dev, int slot)
{
- struct omap_mmc_platform_data *mmc = dev->platform_data;
+ struct omap_hsmmc_host *host = dev_get_drvdata(dev);
+ struct omap_mmc_platform_data *mmc = host->pdata;
/* NOTE: assumes card detect signal is active-low */
return !gpio_get_value_cansleep(mmc->slots[0].switch_pin);
@@ -204,7 +205,8 @@
static int omap_hsmmc_suspend_cdirq(struct device *dev, int slot)
{
- struct omap_mmc_platform_data *mmc = dev->platform_data;
+ struct omap_hsmmc_host *host = dev_get_drvdata(dev);
+ struct omap_mmc_platform_data *mmc = host->pdata;
disable_irq(mmc->slots[0].card_detect_irq);
return 0;
@@ -212,7 +214,8 @@
static int omap_hsmmc_resume_cdirq(struct device *dev, int slot)
{
- struct omap_mmc_platform_data *mmc = dev->platform_data;
+ struct omap_hsmmc_host *host = dev_get_drvdata(dev);
+ struct omap_mmc_platform_data *mmc = host->pdata;
enable_irq(mmc->slots[0].card_detect_irq);
return 0;
@@ -2009,9 +2012,9 @@
clk_put(host->dbclk);
}
- mmc_free_host(host->mmc);
+ omap_hsmmc_gpio_free(host->pdata);
iounmap(host->base);
- omap_hsmmc_gpio_free(pdev->dev.platform_data);
+ mmc_free_host(host->mmc);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (res)
diff --git a/drivers/mmc/host/sdhci-dove.c b/drivers/mmc/host/sdhci-dove.c
index 90140eb..8fd50a2 100644
--- a/drivers/mmc/host/sdhci-dove.c
+++ b/drivers/mmc/host/sdhci-dove.c
@@ -19,6 +19,7 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#include <linux/err.h>
#include <linux/io.h>
#include <linux/clk.h>
#include <linux/err.h>
@@ -84,30 +85,32 @@
struct sdhci_dove_priv *priv;
int ret;
- ret = sdhci_pltfm_register(pdev, &sdhci_dove_pdata);
- if (ret)
- goto sdhci_dove_register_fail;
-
priv = devm_kzalloc(&pdev->dev, sizeof(struct sdhci_dove_priv),
GFP_KERNEL);
if (!priv) {
dev_err(&pdev->dev, "unable to allocate private data");
- ret = -ENOMEM;
- goto sdhci_dove_allocate_fail;
+ return -ENOMEM;
}
+ priv->clk = clk_get(&pdev->dev, NULL);
+ if (!IS_ERR(priv->clk))
+ clk_prepare_enable(priv->clk);
+
+ ret = sdhci_pltfm_register(pdev, &sdhci_dove_pdata);
+ if (ret)
+ goto sdhci_dove_register_fail;
+
host = platform_get_drvdata(pdev);
pltfm_host = sdhci_priv(host);
pltfm_host->priv = priv;
- priv->clk = clk_get(&pdev->dev, NULL);
- if (!IS_ERR(priv->clk))
- clk_prepare_enable(priv->clk);
return 0;
-sdhci_dove_allocate_fail:
- sdhci_pltfm_unregister(pdev);
sdhci_dove_register_fail:
+ if (!IS_ERR(priv->clk)) {
+ clk_disable_unprepare(priv->clk);
+ clk_put(priv->clk);
+ }
return ret;
}
@@ -117,14 +120,13 @@
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct sdhci_dove_priv *priv = pltfm_host->priv;
- if (priv->clk) {
- if (!IS_ERR(priv->clk)) {
- clk_disable_unprepare(priv->clk);
- clk_put(priv->clk);
- }
- devm_kfree(&pdev->dev, priv->clk);
+ sdhci_pltfm_unregister(pdev);
+
+ if (!IS_ERR(priv->clk)) {
+ clk_disable_unprepare(priv->clk);
+ clk_put(priv->clk);
}
- return sdhci_pltfm_unregister(pdev);
+ return 0;
}
static const struct of_device_id sdhci_dove_of_match_table[] __devinitdata = {
diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c
index ae5fcbf..63d219f 100644
--- a/drivers/mmc/host/sdhci-of-esdhc.c
+++ b/drivers/mmc/host/sdhci-of-esdhc.c
@@ -169,6 +169,16 @@
}
#endif
+static void esdhc_of_platform_init(struct sdhci_host *host)
+{
+ u32 vvn;
+
+ vvn = in_be32(host->ioaddr + SDHCI_SLOT_INT_STATUS);
+ vvn = (vvn & SDHCI_VENDOR_VER_MASK) >> SDHCI_VENDOR_VER_SHIFT;
+ if (vvn == VENDOR_V_22)
+ host->quirks2 |= SDHCI_QUIRK2_HOST_NO_CMD23;
+}
+
static struct sdhci_ops sdhci_esdhc_ops = {
.read_l = esdhc_readl,
.read_w = esdhc_readw,
@@ -180,6 +190,7 @@
.enable_dma = esdhc_of_enable_dma,
.get_max_clock = esdhc_of_get_max_clock,
.get_min_clock = esdhc_of_get_min_clock,
+ .platform_init = esdhc_of_platform_init,
#ifdef CONFIG_PM
.platform_suspend = esdhc_of_suspend,
.platform_resume = esdhc_of_resume,
diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c
index 4bb74b0..04936f3 100644
--- a/drivers/mmc/host/sdhci-pci.c
+++ b/drivers/mmc/host/sdhci-pci.c
@@ -1196,7 +1196,7 @@
return ERR_PTR(-ENODEV);
}
- if (pci_resource_len(pdev, bar) != 0x100) {
+ if (pci_resource_len(pdev, bar) < 0x100) {
dev_err(&pdev->dev, "Invalid iomem size. You may "
"experience problems.\n");
}
diff --git a/drivers/mmc/host/sdhci-pltfm.c b/drivers/mmc/host/sdhci-pltfm.c
index 65551a9..2716445 100644
--- a/drivers/mmc/host/sdhci-pltfm.c
+++ b/drivers/mmc/host/sdhci-pltfm.c
@@ -150,6 +150,13 @@
goto err_remap;
}
+ /*
+ * Some platforms need to probe the controller to be able to
+ * determine which caps should be used.
+ */
+ if (host->ops && host->ops->platform_init)
+ host->ops->platform_init(host);
+
platform_set_drvdata(pdev, host);
return host;
diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c
index 2903949..a54dd5d 100644
--- a/drivers/mmc/host/sdhci-s3c.c
+++ b/drivers/mmc/host/sdhci-s3c.c
@@ -211,8 +211,8 @@
if (ourhost->cur_clk != best_src) {
struct clk *clk = ourhost->clk_bus[best_src];
- clk_enable(clk);
- clk_disable(ourhost->clk_bus[ourhost->cur_clk]);
+ clk_prepare_enable(clk);
+ clk_disable_unprepare(ourhost->clk_bus[ourhost->cur_clk]);
/* turn clock off to card before changing clock source */
writew(0, host->ioaddr + SDHCI_CLOCK_CONTROL);
@@ -607,7 +607,7 @@
}
/* enable the local io clock and keep it running for the moment. */
- clk_enable(sc->clk_io);
+ clk_prepare_enable(sc->clk_io);
for (clks = 0, ptr = 0; ptr < MAX_BUS_CLK; ptr++) {
struct clk *clk;
@@ -638,7 +638,7 @@
}
#ifndef CONFIG_PM_RUNTIME
- clk_enable(sc->clk_bus[sc->cur_clk]);
+ clk_prepare_enable(sc->clk_bus[sc->cur_clk]);
#endif
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -747,13 +747,14 @@
sdhci_s3c_setup_card_detect_gpio(sc);
#ifdef CONFIG_PM_RUNTIME
- clk_disable(sc->clk_io);
+ if (pdata->cd_type != S3C_SDHCI_CD_INTERNAL)
+ clk_disable_unprepare(sc->clk_io);
#endif
return 0;
err_req_regs:
#ifndef CONFIG_PM_RUNTIME
- clk_disable(sc->clk_bus[sc->cur_clk]);
+ clk_disable_unprepare(sc->clk_bus[sc->cur_clk]);
#endif
for (ptr = 0; ptr < MAX_BUS_CLK; ptr++) {
if (sc->clk_bus[ptr]) {
@@ -762,7 +763,7 @@
}
err_no_busclks:
- clk_disable(sc->clk_io);
+ clk_disable_unprepare(sc->clk_io);
clk_put(sc->clk_io);
err_io_clk:
@@ -794,7 +795,8 @@
gpio_free(sc->ext_cd_gpio);
#ifdef CONFIG_PM_RUNTIME
- clk_enable(sc->clk_io);
+ if (pdata->cd_type != S3C_SDHCI_CD_INTERNAL)
+ clk_prepare_enable(sc->clk_io);
#endif
sdhci_remove_host(host, 1);
@@ -802,14 +804,14 @@
pm_runtime_disable(&pdev->dev);
#ifndef CONFIG_PM_RUNTIME
- clk_disable(sc->clk_bus[sc->cur_clk]);
+ clk_disable_unprepare(sc->clk_bus[sc->cur_clk]);
#endif
for (ptr = 0; ptr < MAX_BUS_CLK; ptr++) {
if (sc->clk_bus[ptr]) {
clk_put(sc->clk_bus[ptr]);
}
}
- clk_disable(sc->clk_io);
+ clk_disable_unprepare(sc->clk_io);
clk_put(sc->clk_io);
if (pdev->dev.of_node) {
@@ -849,8 +851,8 @@
ret = sdhci_runtime_suspend_host(host);
- clk_disable(ourhost->clk_bus[ourhost->cur_clk]);
- clk_disable(busclk);
+ clk_disable_unprepare(ourhost->clk_bus[ourhost->cur_clk]);
+ clk_disable_unprepare(busclk);
return ret;
}
@@ -861,8 +863,8 @@
struct clk *busclk = ourhost->clk_io;
int ret;
- clk_enable(busclk);
- clk_enable(ourhost->clk_bus[ourhost->cur_clk]);
+ clk_prepare_enable(busclk);
+ clk_prepare_enable(ourhost->clk_bus[ourhost->cur_clk]);
ret = sdhci_runtime_resume_host(host);
return ret;
}
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 7922adb..c7851c0 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1315,16 +1315,19 @@
*/
if ((host->flags & SDHCI_NEEDS_RETUNING) &&
!(present_state & (SDHCI_DOING_WRITE | SDHCI_DOING_READ))) {
- /* eMMC uses cmd21 while sd and sdio use cmd19 */
- tuning_opcode = mmc->card->type == MMC_TYPE_MMC ?
- MMC_SEND_TUNING_BLOCK_HS200 :
- MMC_SEND_TUNING_BLOCK;
- spin_unlock_irqrestore(&host->lock, flags);
- sdhci_execute_tuning(mmc, tuning_opcode);
- spin_lock_irqsave(&host->lock, flags);
+ if (mmc->card) {
+ /* eMMC uses cmd21 but sd and sdio use cmd19 */
+ tuning_opcode =
+ mmc->card->type == MMC_TYPE_MMC ?
+ MMC_SEND_TUNING_BLOCK_HS200 :
+ MMC_SEND_TUNING_BLOCK;
+ spin_unlock_irqrestore(&host->lock, flags);
+ sdhci_execute_tuning(mmc, tuning_opcode);
+ spin_lock_irqsave(&host->lock, flags);
- /* Restore original mmc_request structure */
- host->mrq = mrq;
+ /* Restore original mmc_request structure */
+ host->mrq = mrq;
+ }
}
if (mrq->sbc && !(host->flags & SDHCI_AUTO_CMD23))
@@ -2837,6 +2840,9 @@
if (!(host->quirks & SDHCI_QUIRK_FORCE_1_BIT_DATA))
mmc->caps |= MMC_CAP_4_BIT_DATA;
+ if (host->quirks2 & SDHCI_QUIRK2_HOST_NO_CMD23)
+ mmc->caps &= ~MMC_CAP_CMD23;
+
if (caps[0] & SDHCI_CAN_DO_HISPD)
mmc->caps |= MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED;
@@ -2846,9 +2852,12 @@
/* If vqmmc regulator and no 1.8V signalling, then there's no UHS */
host->vqmmc = regulator_get(mmc_dev(mmc), "vqmmc");
- if (IS_ERR(host->vqmmc)) {
- pr_info("%s: no vqmmc regulator found\n", mmc_hostname(mmc));
- host->vqmmc = NULL;
+ if (IS_ERR_OR_NULL(host->vqmmc)) {
+ if (PTR_ERR(host->vqmmc) < 0) {
+ pr_info("%s: no vqmmc regulator found\n",
+ mmc_hostname(mmc));
+ host->vqmmc = NULL;
+ }
}
else if (regulator_is_supported_voltage(host->vqmmc, 1800000, 1800000))
regulator_enable(host->vqmmc);
@@ -2904,9 +2913,12 @@
ocr_avail = 0;
host->vmmc = regulator_get(mmc_dev(mmc), "vmmc");
- if (IS_ERR(host->vmmc)) {
- pr_info("%s: no vmmc regulator found\n", mmc_hostname(mmc));
- host->vmmc = NULL;
+ if (IS_ERR_OR_NULL(host->vmmc)) {
+ if (PTR_ERR(host->vmmc) < 0) {
+ pr_info("%s: no vmmc regulator found\n",
+ mmc_hostname(mmc));
+ host->vmmc = NULL;
+ }
} else
regulator_enable(host->vmmc);
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 97653ea..71a4a7ed 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -278,6 +278,7 @@
void (*hw_reset)(struct sdhci_host *host);
void (*platform_suspend)(struct sdhci_host *host);
void (*platform_resume)(struct sdhci_host *host);
+ void (*platform_init)(struct sdhci_host *host);
};
#ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS
diff --git a/drivers/mmc/host/sh_mmcif.c b/drivers/mmc/host/sh_mmcif.c
index 11d2bc3..d25bc97 100644
--- a/drivers/mmc/host/sh_mmcif.c
+++ b/drivers/mmc/host/sh_mmcif.c
@@ -1466,9 +1466,9 @@
platform_set_drvdata(pdev, NULL);
+ clk_disable(host->hclk);
mmc_free_host(host->mmc);
pm_runtime_put_sync(&pdev->dev);
- clk_disable(host->hclk);
pm_runtime_disable(&pdev->dev);
return 0;
diff --git a/drivers/mtd/devices/slram.c b/drivers/mtd/devices/slram.c
index 8f52fc8..5a5cd2a 100644
--- a/drivers/mtd/devices/slram.c
+++ b/drivers/mtd/devices/slram.c
@@ -240,7 +240,7 @@
if (*(szlength) != '+') {
devlength = simple_strtoul(szlength, &buffer, 0);
- devlength = handle_unit(devlength, buffer) - devstart;
+ devlength = handle_unit(devlength, buffer);
if (devlength < devstart)
goto err_out;
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index 72e31d8..022dcdc 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -37,15 +37,9 @@
#include <asm/mach/flash.h>
#include <linux/platform_data/mtd-mxc_nand.h>
-#include <mach/hardware.h>
#define DRIVER_NAME "mxc_nand"
-#define nfc_is_v21() (cpu_is_mx25() || cpu_is_mx35())
-#define nfc_is_v1() (cpu_is_mx31() || cpu_is_mx27() || cpu_is_mx21())
-#define nfc_is_v3_2a() cpu_is_mx51()
-#define nfc_is_v3_2b() cpu_is_mx53()
-
/* Addresses for NFC registers */
#define NFC_V1_V2_BUF_SIZE (host->regs + 0x00)
#define NFC_V1_V2_BUF_ADDR (host->regs + 0x04)
@@ -1283,6 +1277,53 @@
.ppb_shift = 8,
};
+static inline int is_imx21_nfc(struct mxc_nand_host *host)
+{
+ return host->devtype_data == &imx21_nand_devtype_data;
+}
+
+static inline int is_imx27_nfc(struct mxc_nand_host *host)
+{
+ return host->devtype_data == &imx27_nand_devtype_data;
+}
+
+static inline int is_imx25_nfc(struct mxc_nand_host *host)
+{
+ return host->devtype_data == &imx25_nand_devtype_data;
+}
+
+static inline int is_imx51_nfc(struct mxc_nand_host *host)
+{
+ return host->devtype_data == &imx51_nand_devtype_data;
+}
+
+static inline int is_imx53_nfc(struct mxc_nand_host *host)
+{
+ return host->devtype_data == &imx53_nand_devtype_data;
+}
+
+static struct platform_device_id mxcnd_devtype[] = {
+ {
+ .name = "imx21-nand",
+ .driver_data = (kernel_ulong_t) &imx21_nand_devtype_data,
+ }, {
+ .name = "imx27-nand",
+ .driver_data = (kernel_ulong_t) &imx27_nand_devtype_data,
+ }, {
+ .name = "imx25-nand",
+ .driver_data = (kernel_ulong_t) &imx25_nand_devtype_data,
+ }, {
+ .name = "imx51-nand",
+ .driver_data = (kernel_ulong_t) &imx51_nand_devtype_data,
+ }, {
+ .name = "imx53-nand",
+ .driver_data = (kernel_ulong_t) &imx53_nand_devtype_data,
+ }, {
+ /* sentinel */
+ }
+};
+MODULE_DEVICE_TABLE(platform, mxcnd_devtype);
+
#ifdef CONFIG_OF_MTD
static const struct of_device_id mxcnd_dt_ids[] = {
{
@@ -1337,32 +1378,6 @@
}
#endif
-static int __init mxcnd_probe_pdata(struct mxc_nand_host *host)
-{
- struct mxc_nand_platform_data *pdata = host->dev->platform_data;
-
- if (!pdata)
- return -ENODEV;
-
- host->pdata = *pdata;
-
- if (nfc_is_v1()) {
- if (cpu_is_mx21())
- host->devtype_data = &imx21_nand_devtype_data;
- else
- host->devtype_data = &imx27_nand_devtype_data;
- } else if (nfc_is_v21()) {
- host->devtype_data = &imx25_nand_devtype_data;
- } else if (nfc_is_v3_2a()) {
- host->devtype_data = &imx51_nand_devtype_data;
- } else if (nfc_is_v3_2b()) {
- host->devtype_data = &imx53_nand_devtype_data;
- } else
- BUG();
-
- return 0;
-}
-
static int __devinit mxcnd_probe(struct platform_device *pdev)
{
struct nand_chip *this;
@@ -1404,8 +1419,16 @@
return PTR_ERR(host->clk);
err = mxcnd_probe_dt(host);
- if (err > 0)
- err = mxcnd_probe_pdata(host);
+ if (err > 0) {
+ struct mxc_nand_platform_data *pdata = pdev->dev.platform_data;
+ if (pdata) {
+ host->pdata = *pdata;
+ host->devtype_data = (struct mxc_nand_devtype_data *)
+ pdev->id_entry->driver_data;
+ } else {
+ err = -ENODEV;
+ }
+ }
if (err < 0)
return err;
@@ -1494,7 +1517,7 @@
}
/* first scan to find the device and get the page size */
- if (nand_scan_ident(mtd, nfc_is_v21() ? 4 : 1, NULL)) {
+ if (nand_scan_ident(mtd, is_imx25_nfc(host) ? 4 : 1, NULL)) {
err = -ENXIO;
goto escan;
}
@@ -1508,7 +1531,7 @@
this->ecc.layout = host->devtype_data->ecclayout_4k;
if (this->ecc.mode == NAND_ECC_HW) {
- if (nfc_is_v1())
+ if (is_imx21_nfc(host) || is_imx27_nfc(host))
this->ecc.strength = 1;
else
this->ecc.strength = (host->eccsize == 4) ? 4 : 8;
@@ -1555,6 +1578,7 @@
.owner = THIS_MODULE,
.of_match_table = of_match_ptr(mxcnd_dt_ids),
},
+ .id_table = mxcnd_devtype,
.probe = mxcnd_probe,
.remove = __devexit_p(mxcnd_remove),
};
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index ec6841d..1a03b7f 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -2983,13 +2983,15 @@
/*
* Field definitions are in the following datasheets:
* Old style (4,5 byte ID): Samsung K9GAG08U0M (p.32)
- * New style (6 byte ID): Samsung K9GAG08U0F (p.44)
+ * New Samsung (6 byte ID): Samsung K9GAG08U0F (p.44)
* Hynix MLC (6 byte ID): Hynix H27UBG8T2B (p.22)
*
- * Check for ID length, cell type, and Hynix/Samsung ID to decide what
- * to do.
+ * Check for ID length, non-zero 6th byte, cell type, and Hynix/Samsung
+ * ID to decide what to do.
*/
- if (id_len == 6 && id_data[0] == NAND_MFR_SAMSUNG) {
+ if (id_len == 6 && id_data[0] == NAND_MFR_SAMSUNG &&
+ (chip->cellinfo & NAND_CI_CELLTYPE_MSK) &&
+ id_data[5] != 0x00) {
/* Calc pagesize */
mtd->writesize = 2048 << (extid & 0x03);
extid >>= 2;
diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index 5b31386..5c8978e 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -27,8 +27,7 @@
#include <linux/bch.h>
#endif
-#include <plat/dma.h>
-#include <plat/gpmc.h>
+#include <plat-omap/dma-omap.h>
#include <linux/platform_data/mtd-nand-omap2.h>
#define DRIVER_NAME "omap2-nand"
@@ -106,10 +105,18 @@
#define CS_MASK 0x7
#define ENABLE_PREFETCH (0x1 << 7)
#define DMA_MPU_MODE_SHIFT 2
+#define ECCSIZE0_SHIFT 12
#define ECCSIZE1_SHIFT 22
#define ECC1RESULTSIZE 0x1
#define ECCCLEAR 0x100
#define ECC1 0x1
+#define PREFETCH_FIFOTHRESHOLD_MAX 0x40
+#define PREFETCH_FIFOTHRESHOLD(val) ((val) << 8)
+#define PREFETCH_STATUS_COUNT(val) (val & 0x00003fff)
+#define PREFETCH_STATUS_FIFO_CNT(val) ((val >> 24) & 0x7F)
+#define STATUS_BUFF_EMPTY 0x00000001
+
+#define OMAP24XX_DMA_GPMC 4
/* oob info generated runtime depending on ecc algorithm and layout selected */
static struct nand_ecclayout omap_oobinfo;
@@ -269,7 +276,7 @@
/* wait until buffer is available for write */
do {
status = readl(info->reg.gpmc_status) &
- GPMC_STATUS_BUFF_EMPTY;
+ STATUS_BUFF_EMPTY;
} while (!status);
}
}
@@ -307,7 +314,7 @@
/* wait until buffer is available for write */
do {
status = readl(info->reg.gpmc_status) &
- GPMC_STATUS_BUFF_EMPTY;
+ STATUS_BUFF_EMPTY;
} while (!status);
}
}
@@ -348,7 +355,7 @@
} else {
do {
r_count = readl(info->reg.gpmc_prefetch_status);
- r_count = GPMC_PREFETCH_STATUS_FIFO_CNT(r_count);
+ r_count = PREFETCH_STATUS_FIFO_CNT(r_count);
r_count = r_count >> 2;
ioread32_rep(info->nand.IO_ADDR_R, p, r_count);
p += r_count;
@@ -395,7 +402,7 @@
} else {
while (len) {
w_count = readl(info->reg.gpmc_prefetch_status);
- w_count = GPMC_PREFETCH_STATUS_FIFO_CNT(w_count);
+ w_count = PREFETCH_STATUS_FIFO_CNT(w_count);
w_count = w_count >> 1;
for (i = 0; (i < w_count) && len; i++, len -= 2)
iowrite16(*p++, info->nand.IO_ADDR_W);
@@ -407,7 +414,7 @@
do {
cpu_relax();
val = readl(info->reg.gpmc_prefetch_status);
- val = GPMC_PREFETCH_STATUS_COUNT(val);
+ val = PREFETCH_STATUS_COUNT(val);
} while (val && (tim++ < limit));
/* disable and stop the PFPW engine */
@@ -493,7 +500,7 @@
do {
cpu_relax();
val = readl(info->reg.gpmc_prefetch_status);
- val = GPMC_PREFETCH_STATUS_COUNT(val);
+ val = PREFETCH_STATUS_COUNT(val);
} while (val && (tim++ < limit));
/* disable and stop the PFPW engine */
@@ -556,7 +563,7 @@
u32 bytes;
bytes = readl(info->reg.gpmc_prefetch_status);
- bytes = GPMC_PREFETCH_STATUS_FIFO_CNT(bytes);
+ bytes = PREFETCH_STATUS_FIFO_CNT(bytes);
bytes = bytes & 0xFFFC; /* io in multiple of 4 bytes */
if (info->iomode == OMAP_NAND_IO_WRITE) { /* checks for write io */
if (this_irq == info->gpmc_irq_count)
@@ -682,7 +689,7 @@
limit = (loops_per_jiffy * msecs_to_jiffies(OMAP_NAND_TIMEOUT_MS));
do {
val = readl(info->reg.gpmc_prefetch_status);
- val = GPMC_PREFETCH_STATUS_COUNT(val);
+ val = PREFETCH_STATUS_COUNT(val);
cpu_relax();
} while (val && (tim++ < limit));
@@ -996,7 +1003,7 @@
cond_resched();
}
- status = gpmc_nand_read(info->gpmc_cs, GPMC_NAND_DATA);
+ status = readb(info->reg.gpmc_nand_data);
return status;
}
@@ -1029,19 +1036,45 @@
static void omap3_enable_hwecc_bch(struct mtd_info *mtd, int mode)
{
int nerrors;
- unsigned int dev_width;
+ unsigned int dev_width, nsectors;
struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
mtd);
struct nand_chip *chip = mtd->priv;
+ u32 val;
nerrors = (info->nand.ecc.bytes == 13) ? 8 : 4;
dev_width = (chip->options & NAND_BUSWIDTH_16) ? 1 : 0;
+ nsectors = 1;
/*
* Program GPMC to perform correction on one 512-byte sector at a time.
* Using 4 sectors at a time (i.e. ecc.size = 2048) is also possible and
* gives a slight (5%) performance gain (but requires additional code).
*/
- (void)gpmc_enable_hwecc_bch(info->gpmc_cs, mode, dev_width, 1, nerrors);
+
+ writel(ECC1, info->reg.gpmc_ecc_control);
+
+ /*
+ * When using BCH, sector size is hardcoded to 512 bytes.
+ * Here we are using wrapping mode 6 both for reading and writing, with:
+ * size0 = 0 (no additional protected byte in spare area)
+ * size1 = 32 (skip 32 nibbles = 16 bytes per sector in spare area)
+ */
+ val = (32 << ECCSIZE1_SHIFT) | (0 << ECCSIZE0_SHIFT);
+ writel(val, info->reg.gpmc_ecc_size_config);
+
+ /* BCH configuration */
+ val = ((1 << 16) | /* enable BCH */
+ (((nerrors == 8) ? 1 : 0) << 12) | /* 8 or 4 bits */
+ (0x06 << 8) | /* wrap mode = 6 */
+ (dev_width << 7) | /* bus width */
+ (((nsectors-1) & 0x7) << 4) | /* number of sectors */
+ (info->gpmc_cs << 1) | /* ECC CS */
+ (0x1)); /* enable ECC */
+
+ writel(val, info->reg.gpmc_ecc_config);
+
+ /* clear ecc and enable bits */
+ writel(ECCCLEAR | ECC1, info->reg.gpmc_ecc_control);
}
/**
@@ -1055,7 +1088,32 @@
{
struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
mtd);
- return gpmc_calculate_ecc_bch4(info->gpmc_cs, dat, ecc_code);
+ unsigned long nsectors, val1, val2;
+ int i;
+
+ nsectors = ((readl(info->reg.gpmc_ecc_config) >> 4) & 0x7) + 1;
+
+ for (i = 0; i < nsectors; i++) {
+
+ /* Read hw-computed remainder */
+ val1 = readl(info->reg.gpmc_bch_result0[i]);
+ val2 = readl(info->reg.gpmc_bch_result1[i]);
+
+ /*
+ * Add constant polynomial to remainder, in order to get an ecc
+ * sequence of 0xFFs for a buffer filled with 0xFFs; and
+ * left-justify the resulting polynomial.
+ */
+ *ecc_code++ = 0x28 ^ ((val2 >> 12) & 0xFF);
+ *ecc_code++ = 0x13 ^ ((val2 >> 4) & 0xFF);
+ *ecc_code++ = 0xcc ^ (((val2 & 0xF) << 4)|((val1 >> 28) & 0xF));
+ *ecc_code++ = 0x39 ^ ((val1 >> 20) & 0xFF);
+ *ecc_code++ = 0x96 ^ ((val1 >> 12) & 0xFF);
+ *ecc_code++ = 0xac ^ ((val1 >> 4) & 0xFF);
+ *ecc_code++ = 0x7f ^ ((val1 & 0xF) << 4);
+ }
+
+ return 0;
}
/**
@@ -1069,7 +1127,39 @@
{
struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
mtd);
- return gpmc_calculate_ecc_bch8(info->gpmc_cs, dat, ecc_code);
+ unsigned long nsectors, val1, val2, val3, val4;
+ int i;
+
+ nsectors = ((readl(info->reg.gpmc_ecc_config) >> 4) & 0x7) + 1;
+
+ for (i = 0; i < nsectors; i++) {
+
+ /* Read hw-computed remainder */
+ val1 = readl(info->reg.gpmc_bch_result0[i]);
+ val2 = readl(info->reg.gpmc_bch_result1[i]);
+ val3 = readl(info->reg.gpmc_bch_result2[i]);
+ val4 = readl(info->reg.gpmc_bch_result3[i]);
+
+ /*
+ * Add constant polynomial to remainder, in order to get an ecc
+ * sequence of 0xFFs for a buffer filled with 0xFFs.
+ */
+ *ecc_code++ = 0xef ^ (val4 & 0xFF);
+ *ecc_code++ = 0x51 ^ ((val3 >> 24) & 0xFF);
+ *ecc_code++ = 0x2e ^ ((val3 >> 16) & 0xFF);
+ *ecc_code++ = 0x09 ^ ((val3 >> 8) & 0xFF);
+ *ecc_code++ = 0xed ^ (val3 & 0xFF);
+ *ecc_code++ = 0x93 ^ ((val2 >> 24) & 0xFF);
+ *ecc_code++ = 0x9a ^ ((val2 >> 16) & 0xFF);
+ *ecc_code++ = 0xc2 ^ ((val2 >> 8) & 0xFF);
+ *ecc_code++ = 0x97 ^ (val2 & 0xFF);
+ *ecc_code++ = 0x79 ^ ((val1 >> 24) & 0xFF);
+ *ecc_code++ = 0xe5 ^ ((val1 >> 16) & 0xFF);
+ *ecc_code++ = 0x24 ^ ((val1 >> 8) & 0xFF);
+ *ecc_code++ = 0xb5 ^ (val1 & 0xFF);
+ }
+
+ return 0;
}
/**
@@ -1125,7 +1215,7 @@
*/
static int omap3_init_bch(struct mtd_info *mtd, int ecc_opt)
{
- int ret, max_errors;
+ int max_errors;
struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
mtd);
#ifdef CONFIG_MTD_NAND_OMAP_BCH8
@@ -1142,11 +1232,6 @@
goto fail;
}
- /* initialize GPMC BCH engine */
- ret = gpmc_init_hwecc_bch(info->gpmc_cs, 1, max_errors);
- if (ret)
- goto fail;
-
/* software bch library is only used to detect and locate errors */
info->bch = init_bch(13, max_errors, 0x201b /* hw polynomial */);
if (!info->bch)
@@ -1513,7 +1598,7 @@
/* Release NAND device, its internal structures and partitions */
nand_release(&info->mtd);
iounmap(info->nand.IO_ADDR_R);
- release_mem_region(info->phys_base, NAND_IO_SIZE);
+ release_mem_region(info->phys_base, info->mem_size);
kfree(info);
return 0;
}
diff --git a/drivers/mtd/ofpart.c b/drivers/mtd/ofpart.c
index 64be8f08..d9127e2 100644
--- a/drivers/mtd/ofpart.c
+++ b/drivers/mtd/ofpart.c
@@ -121,7 +121,7 @@
nr_parts = plen / sizeof(part[0]);
*pparts = kzalloc(nr_parts * sizeof(*(*pparts)), GFP_KERNEL);
- if (!pparts)
+ if (!*pparts)
return -ENOMEM;
names = of_get_property(dp, "partition-names", &plen);
diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c
index 1961be9..99f96e1 100644
--- a/drivers/mtd/onenand/omap2.c
+++ b/drivers/mtd/onenand/omap2.c
@@ -38,12 +38,10 @@
#include <linux/regulator/consumer.h>
#include <asm/mach/flash.h>
-#include <plat/gpmc.h>
#include <linux/platform_data/mtd-onenand-omap2.h>
#include <asm/gpio.h>
-#include <plat/dma.h>
-#include <plat/cpu.h>
+#include <plat-omap/dma-omap.h>
#define DRIVER_NAME "omap2-onenand"
@@ -63,6 +61,7 @@
int freq;
int (*setup)(void __iomem *base, int *freq_ptr);
struct regulator *regulator;
+ u8 flags;
};
static void omap2_onenand_dma_cb(int lch, u16 ch_status, void *data)
@@ -155,7 +154,7 @@
if (!(syscfg & ONENAND_SYS_CFG1_IOBE)) {
syscfg |= ONENAND_SYS_CFG1_IOBE;
write_reg(c, syscfg, ONENAND_REG_SYS_CFG1);
- if (cpu_is_omap34xx())
+ if (c->flags & ONENAND_IN_OMAP34XX)
/* Add a delay to let GPIO settle */
syscfg = read_reg(c, ONENAND_REG_SYS_CFG1);
}
@@ -446,13 +445,19 @@
#else
-int omap3_onenand_read_bufferram(struct mtd_info *mtd, int area,
- unsigned char *buffer, int offset,
- size_t count);
+static int omap3_onenand_read_bufferram(struct mtd_info *mtd, int area,
+ unsigned char *buffer, int offset,
+ size_t count)
+{
+ return -ENOSYS;
+}
-int omap3_onenand_write_bufferram(struct mtd_info *mtd, int area,
- const unsigned char *buffer,
- int offset, size_t count);
+static int omap3_onenand_write_bufferram(struct mtd_info *mtd, int area,
+ const unsigned char *buffer,
+ int offset, size_t count)
+{
+ return -ENOSYS;
+}
#endif
@@ -550,13 +555,19 @@
#else
-int omap2_onenand_read_bufferram(struct mtd_info *mtd, int area,
- unsigned char *buffer, int offset,
- size_t count);
+static int omap2_onenand_read_bufferram(struct mtd_info *mtd, int area,
+ unsigned char *buffer, int offset,
+ size_t count)
+{
+ return -ENOSYS;
+}
-int omap2_onenand_write_bufferram(struct mtd_info *mtd, int area,
- const unsigned char *buffer,
- int offset, size_t count);
+static int omap2_onenand_write_bufferram(struct mtd_info *mtd, int area,
+ const unsigned char *buffer,
+ int offset, size_t count)
+{
+ return -ENOSYS;
+}
#endif
@@ -639,6 +650,7 @@
init_completion(&c->irq_done);
init_completion(&c->dma_done);
+ c->flags = pdata->flags;
c->gpmc_cs = pdata->cs;
c->gpio_irq = pdata->gpio_irq;
c->dma_channel = pdata->dma_channel;
@@ -729,7 +741,7 @@
this = &c->onenand;
if (c->dma_channel >= 0) {
this->wait = omap2_onenand_wait;
- if (cpu_is_omap34xx()) {
+ if (c->flags & ONENAND_IN_OMAP34XX) {
this->read_bufferram = omap3_onenand_read_bufferram;
this->write_bufferram = omap3_onenand_write_bufferram;
} else {
@@ -803,7 +815,6 @@
}
iounmap(c->onenand.base);
release_mem_region(c->phys_base, c->mem_size);
- gpmc_cs_free(c->gpmc_cs);
kfree(c);
return 0;
diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c
index 7153e0d2..b3f41f2 100644
--- a/drivers/mtd/onenand/onenand_base.c
+++ b/drivers/mtd/onenand/onenand_base.c
@@ -3694,7 +3694,7 @@
* flexonenand_set_boundary - Writes the SLC boundary
* @param mtd - mtd info structure
*/
-int flexonenand_set_boundary(struct mtd_info *mtd, int die,
+static int flexonenand_set_boundary(struct mtd_info *mtd, int die,
int boundary, int lock)
{
struct onenand_chip *this = mtd->priv;
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index b2530b0..5f5b69f 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -1379,6 +1379,8 @@
struct net_device *bond_dev = bond->dev;
netdev_features_t vlan_features = BOND_VLAN_FEATURES;
unsigned short max_hard_header_len = ETH_HLEN;
+ unsigned int gso_max_size = GSO_MAX_SIZE;
+ u16 gso_max_segs = GSO_MAX_SEGS;
int i;
unsigned int flags, dst_release_flag = IFF_XMIT_DST_RELEASE;
@@ -1394,11 +1396,16 @@
dst_release_flag &= slave->dev->priv_flags;
if (slave->dev->hard_header_len > max_hard_header_len)
max_hard_header_len = slave->dev->hard_header_len;
+
+ gso_max_size = min(gso_max_size, slave->dev->gso_max_size);
+ gso_max_segs = min(gso_max_segs, slave->dev->gso_max_segs);
}
done:
bond_dev->vlan_features = vlan_features;
bond_dev->hard_header_len = max_hard_header_len;
+ bond_dev->gso_max_segs = gso_max_segs;
+ netif_set_gso_max_size(bond_dev, gso_max_size);
flags = bond_dev->priv_flags & ~IFF_XMIT_DST_RELEASE;
bond_dev->priv_flags = flags | dst_release_flag;
diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c
index dc15d24..ef8d2a0 100644
--- a/drivers/net/bonding/bond_sysfs.c
+++ b/drivers/net/bonding/bond_sysfs.c
@@ -1060,7 +1060,7 @@
goto out;
}
- sscanf(buf, "%16s", ifname); /* IFNAMSIZ */
+ sscanf(buf, "%15s", ifname); /* IFNAMSIZ */
/* check to see if we are clearing primary */
if (!strlen(ifname) || buf[0] == '\n') {
@@ -1237,7 +1237,7 @@
goto out;
}
- sscanf(buf, "%16s", ifname); /* IFNAMSIZ */
+ sscanf(buf, "%15s", ifname); /* IFNAMSIZ */
/* check to see if we are clearing active */
if (!strlen(ifname) || buf[0] == '\n') {
diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c
index c78ecfc..a412bf6 100644
--- a/drivers/net/can/flexcan.c
+++ b/drivers/net/can/flexcan.c
@@ -144,9 +144,22 @@
#define FLEXCAN_MB_CODE_MASK (0xf0ffffff)
-/* FLEXCAN hardware feature flags */
+/*
+ * FLEXCAN hardware feature flags
+ *
+ * Below is some version info we got:
+ * SOC Version IP-Version Glitch- [TR]WRN_INT
+ * Filter? connected?
+ * MX25 FlexCAN2 03.00.00.00 no no
+ * MX28 FlexCAN2 03.00.04.00 yes yes
+ * MX35 FlexCAN2 03.00.00.00 no no
+ * MX53 FlexCAN2 03.00.00.00 yes no
+ * MX6s FlexCAN3 10.00.12.00 yes yes
+ *
+ * Some SOCs do not have the RX_WARN & TX_WARN interrupt line connected.
+ */
#define FLEXCAN_HAS_V10_FEATURES BIT(1) /* For core version >= 10 */
-#define FLEXCAN_HAS_BROKEN_ERR_STATE BIT(2) /* Broken error state handling */
+#define FLEXCAN_HAS_BROKEN_ERR_STATE BIT(2) /* [TR]WRN_INT not connected */
/* Structure of the message buffer */
struct flexcan_mb {
@@ -205,7 +218,7 @@
};
static struct flexcan_devtype_data fsl_imx28_devtype_data;
static struct flexcan_devtype_data fsl_imx6q_devtype_data = {
- .features = FLEXCAN_HAS_V10_FEATURES | FLEXCAN_HAS_BROKEN_ERR_STATE,
+ .features = FLEXCAN_HAS_V10_FEATURES,
};
static const struct can_bittiming_const flexcan_bittiming_const = {
diff --git a/drivers/net/can/sja1000/peak_pci.c b/drivers/net/can/sja1000/peak_pci.c
index f5b82ae..6525dbc 100644
--- a/drivers/net/can/sja1000/peak_pci.c
+++ b/drivers/net/can/sja1000/peak_pci.c
@@ -30,9 +30,10 @@
#include "sja1000.h"
-MODULE_AUTHOR("Wolfgang Grandegger <wg@grandegger.com>");
+MODULE_AUTHOR("Stephane Grosjean <s.grosjean@peak-system.com>");
MODULE_DESCRIPTION("Socket-CAN driver for PEAK PCAN PCI family cards");
MODULE_SUPPORTED_DEVICE("PEAK PCAN PCI/PCIe/PCIeC miniPCI CAN cards");
+MODULE_SUPPORTED_DEVICE("PEAK PCAN miniPCIe/cPCI PC/104+ PCI/104e CAN Cards");
MODULE_LICENSE("GPL v2");
#define DRV_NAME "peak_pci"
@@ -64,7 +65,11 @@
#define PEAK_PCI_DEVICE_ID 0x0001 /* for PCI/PCIe slot cards */
#define PEAK_PCIEC_DEVICE_ID 0x0002 /* for ExpressCard slot cards */
#define PEAK_PCIE_DEVICE_ID 0x0003 /* for nextgen PCIe slot cards */
-#define PEAK_MPCI_DEVICE_ID 0x0008 /* The miniPCI slot cards */
+#define PEAK_CPCI_DEVICE_ID 0x0004 /* for nextgen cPCI slot cards */
+#define PEAK_MPCI_DEVICE_ID 0x0005 /* for nextgen miniPCI slot cards */
+#define PEAK_PC_104P_DEVICE_ID 0x0006 /* PCAN-PC/104+ cards */
+#define PEAK_PCI_104E_DEVICE_ID 0x0007 /* PCAN-PCI/104 Express cards */
+#define PEAK_MPCIE_DEVICE_ID 0x0008 /* The miniPCIe slot cards */
#define PEAK_PCI_CHAN_MAX 4
@@ -76,6 +81,10 @@
{PEAK_PCI_VENDOR_ID, PEAK_PCI_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
{PEAK_PCI_VENDOR_ID, PEAK_PCIE_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
{PEAK_PCI_VENDOR_ID, PEAK_MPCI_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
+ {PEAK_PCI_VENDOR_ID, PEAK_MPCIE_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
+ {PEAK_PCI_VENDOR_ID, PEAK_PC_104P_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
+ {PEAK_PCI_VENDOR_ID, PEAK_PCI_104E_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
+ {PEAK_PCI_VENDOR_ID, PEAK_CPCI_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
#ifdef CONFIG_CAN_PEAK_PCIEC
{PEAK_PCI_VENDOR_ID, PEAK_PCIEC_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
#endif
diff --git a/drivers/net/ethernet/8390/ne.c b/drivers/net/ethernet/8390/ne.c
index d04911d..47618e5 100644
--- a/drivers/net/ethernet/8390/ne.c
+++ b/drivers/net/ethernet/8390/ne.c
@@ -813,6 +813,7 @@
dev->irq = irq[this_dev];
dev->mem_end = bad[this_dev];
}
+ SET_NETDEV_DEV(dev, &pdev->dev);
err = do_ne_probe(dev);
if (err) {
free_netdev(dev);
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
index c65295d..6e5bdd1 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
@@ -1702,7 +1702,7 @@
SHMEM_EEE_ADV_STATUS_SHIFT);
if ((advertised != (eee_cfg & SHMEM_EEE_ADV_STATUS_MASK))) {
DP(BNX2X_MSG_ETHTOOL,
- "Direct manipulation of EEE advertisment is not supported\n");
+ "Direct manipulation of EEE advertisement is not supported\n");
return -EINVAL;
}
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
index e2e45ee..f6cfdc6 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
@@ -137,7 +137,16 @@
#define LINK_20GTFD LINK_STATUS_SPEED_AND_DUPLEX_20GTFD
#define LINK_20GXFD LINK_STATUS_SPEED_AND_DUPLEX_20GXFD
-
+#define LINK_UPDATE_MASK \
+ (LINK_STATUS_SPEED_AND_DUPLEX_MASK | \
+ LINK_STATUS_LINK_UP | \
+ LINK_STATUS_PHYSICAL_LINK_FLAG | \
+ LINK_STATUS_AUTO_NEGOTIATE_COMPLETE | \
+ LINK_STATUS_RX_FLOW_CONTROL_FLAG_MASK | \
+ LINK_STATUS_TX_FLOW_CONTROL_FLAG_MASK | \
+ LINK_STATUS_PARALLEL_DETECTION_FLAG_MASK | \
+ LINK_STATUS_LINK_PARTNER_SYMMETRIC_PAUSE | \
+ LINK_STATUS_LINK_PARTNER_ASYMMETRIC_PAUSE)
#define SFP_EEPROM_CON_TYPE_ADDR 0x2
#define SFP_EEPROM_CON_TYPE_VAL_LC 0x7
@@ -3295,6 +3304,21 @@
DEFAULT_PHY_DEV_ADDR);
}
+static void bnx2x_xgxs_specific_func(struct bnx2x_phy *phy,
+ struct link_params *params,
+ u32 action)
+{
+ struct bnx2x *bp = params->bp;
+ switch (action) {
+ case PHY_INIT:
+ /* Set correct devad */
+ REG_WR(bp, NIG_REG_XGXS0_CTRL_MD_ST + params->port*0x18, 0);
+ REG_WR(bp, NIG_REG_XGXS0_CTRL_MD_DEVAD + params->port*0x18,
+ phy->def_md_devad);
+ break;
+ }
+}
+
static void bnx2x_xgxs_deassert(struct link_params *params)
{
struct bnx2x *bp = params->bp;
@@ -3309,10 +3333,8 @@
REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_3_CLEAR, val);
udelay(500);
REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_3_SET, val);
-
- REG_WR(bp, NIG_REG_XGXS0_CTRL_MD_ST + port*0x18, 0);
- REG_WR(bp, NIG_REG_XGXS0_CTRL_MD_DEVAD + port*0x18,
- params->phy[INT_PHY].def_md_devad);
+ bnx2x_xgxs_specific_func(¶ms->phy[INT_PHY], params,
+ PHY_INIT);
}
static void bnx2x_calc_ieee_aneg_adv(struct bnx2x_phy *phy,
@@ -3545,14 +3567,11 @@
static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy,
struct link_params *params,
struct link_vars *vars) {
- u16 val16 = 0, lane, i;
+ u16 lane, i, cl72_ctrl, an_adv = 0;
+ u16 ucode_ver;
struct bnx2x *bp = params->bp;
static struct bnx2x_reg_set reg_set[] = {
{MDIO_WC_DEVAD, MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2, 0x7},
- {MDIO_AN_DEVAD, MDIO_WC_REG_PAR_DET_10G_CTRL, 0},
- {MDIO_WC_DEVAD, MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL, 0},
- {MDIO_WC_DEVAD, MDIO_WC_REG_XGXSBLK1_LANECTRL0, 0xff},
- {MDIO_WC_DEVAD, MDIO_WC_REG_XGXSBLK1_LANECTRL1, 0x5555},
{MDIO_PMA_DEVAD, MDIO_WC_REG_IEEE0BLK_AUTONEGNP, 0x0},
{MDIO_WC_DEVAD, MDIO_WC_REG_RX66_CONTROL, 0x7415},
{MDIO_WC_DEVAD, MDIO_WC_REG_SERDESDIGITAL_MISC2, 0x6190},
@@ -3565,12 +3584,19 @@
bnx2x_cl45_write(bp, phy, reg_set[i].devad, reg_set[i].reg,
reg_set[i].val);
+ bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD,
+ MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL, &cl72_ctrl);
+ cl72_ctrl &= 0xf8ff;
+ cl72_ctrl |= 0x3800;
+ bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD,
+ MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL, cl72_ctrl);
+
/* Check adding advertisement for 1G KX */
if (((vars->line_speed == SPEED_AUTO_NEG) &&
(phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)) ||
(vars->line_speed == SPEED_1000)) {
u32 addr = MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2;
- val16 |= (1<<5);
+ an_adv |= (1<<5);
/* Enable CL37 1G Parallel Detect */
bnx2x_cl45_read_or_write(bp, phy, MDIO_WC_DEVAD, addr, 0x1);
@@ -3580,11 +3606,14 @@
(phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)) ||
(vars->line_speed == SPEED_10000)) {
/* Check adding advertisement for 10G KR */
- val16 |= (1<<7);
+ an_adv |= (1<<7);
/* Enable 10G Parallel Detect */
+ CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_AER_BLOCK,
+ MDIO_AER_BLOCK_AER_REG, 0);
+
bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD,
MDIO_WC_REG_PAR_DET_10G_CTRL, 1);
-
+ bnx2x_set_aer_mmd(params, phy);
DP(NETIF_MSG_LINK, "Advertize 10G\n");
}
@@ -3604,7 +3633,7 @@
/* Advertised speeds */
bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD,
- MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT1, val16);
+ MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT1, an_adv);
/* Advertised and set FEC (Forward Error Correction) */
bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD,
@@ -3628,9 +3657,10 @@
/* Set KR Autoneg Work-Around flag for Warpcore version older than D108
*/
bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD,
- MDIO_WC_REG_UC_INFO_B1_VERSION, &val16);
- if (val16 < 0xd108) {
- DP(NETIF_MSG_LINK, "Enable AN KR work-around\n");
+ MDIO_WC_REG_UC_INFO_B1_VERSION, &ucode_ver);
+ if (ucode_ver < 0xd108) {
+ DP(NETIF_MSG_LINK, "Enable AN KR work-around. WC ver:0x%x\n",
+ ucode_ver);
vars->rx_tx_asic_rst = MAX_KR_LINK_RETRY;
}
bnx2x_cl45_read_or_write(bp, phy, MDIO_WC_DEVAD,
@@ -3651,21 +3681,16 @@
struct link_vars *vars)
{
struct bnx2x *bp = params->bp;
- u16 i;
+ u16 val16, i, lane;
static struct bnx2x_reg_set reg_set[] = {
/* Disable Autoneg */
{MDIO_WC_DEVAD, MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2, 0x7},
- {MDIO_AN_DEVAD, MDIO_WC_REG_PAR_DET_10G_CTRL, 0},
{MDIO_WC_DEVAD, MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL,
0x3f00},
{MDIO_AN_DEVAD, MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT1, 0},
{MDIO_AN_DEVAD, MDIO_WC_REG_IEEE0BLK_MIICNTL, 0x0},
{MDIO_WC_DEVAD, MDIO_WC_REG_DIGITAL3_UP1, 0x1},
{MDIO_WC_DEVAD, MDIO_WC_REG_DIGITAL5_MISC7, 0xa},
- /* Disable CL36 PCS Tx */
- {MDIO_WC_DEVAD, MDIO_WC_REG_XGXSBLK1_LANECTRL0, 0x0},
- /* Double Wide Single Data Rate @ pll rate */
- {MDIO_WC_DEVAD, MDIO_WC_REG_XGXSBLK1_LANECTRL1, 0xFFFF},
/* Leave cl72 training enable, needed for KR */
{MDIO_PMA_DEVAD,
MDIO_WC_REG_PMD_IEEE9BLK_TENGBASE_KR_PMD_CONTROL_REGISTER_150,
@@ -3676,11 +3701,24 @@
bnx2x_cl45_write(bp, phy, reg_set[i].devad, reg_set[i].reg,
reg_set[i].val);
- /* Leave CL72 enabled */
- bnx2x_cl45_read_or_write(bp, phy, MDIO_WC_DEVAD,
- MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL,
- 0x3800);
+ lane = bnx2x_get_warpcore_lane(phy, params);
+ /* Global registers */
+ CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_AER_BLOCK,
+ MDIO_AER_BLOCK_AER_REG, 0);
+ /* Disable CL36 PCS Tx */
+ bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD,
+ MDIO_WC_REG_XGXSBLK1_LANECTRL0, &val16);
+ val16 &= ~(0x0011 << lane);
+ bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD,
+ MDIO_WC_REG_XGXSBLK1_LANECTRL0, val16);
+ bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD,
+ MDIO_WC_REG_XGXSBLK1_LANECTRL1, &val16);
+ val16 |= (0x0303 << (lane << 1));
+ bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD,
+ MDIO_WC_REG_XGXSBLK1_LANECTRL1, val16);
+ /* Restore AER */
+ bnx2x_set_aer_mmd(params, phy);
/* Set speed via PMA/PMD register */
bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD,
MDIO_WC_REG_IEEE0BLK_MIICNTL, 0x2040);
@@ -4303,7 +4341,7 @@
struct link_params *params)
{
struct bnx2x *bp = params->bp;
- u16 val16;
+ u16 val16, lane;
bnx2x_sfp_e3_set_transmitter(params, phy, 0);
bnx2x_set_mdio_clk(bp, params->chip_id, params->port);
bnx2x_set_aer_mmd(params, phy);
@@ -4340,6 +4378,30 @@
MDIO_WC_REG_XGXSBLK1_LANECTRL2,
val16 & 0xff00);
+ lane = bnx2x_get_warpcore_lane(phy, params);
+ /* Disable CL36 PCS Tx */
+ bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD,
+ MDIO_WC_REG_XGXSBLK1_LANECTRL0, &val16);
+ val16 |= (0x11 << lane);
+ if (phy->flags & FLAGS_WC_DUAL_MODE)
+ val16 |= (0x22 << lane);
+ bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD,
+ MDIO_WC_REG_XGXSBLK1_LANECTRL0, val16);
+
+ bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD,
+ MDIO_WC_REG_XGXSBLK1_LANECTRL1, &val16);
+ val16 &= ~(0x0303 << (lane << 1));
+ val16 |= (0x0101 << (lane << 1));
+ if (phy->flags & FLAGS_WC_DUAL_MODE) {
+ val16 &= ~(0x0c0c << (lane << 1));
+ val16 |= (0x0404 << (lane << 1));
+ }
+
+ bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD,
+ MDIO_WC_REG_XGXSBLK1_LANECTRL1, val16);
+ /* Restore AER */
+ bnx2x_set_aer_mmd(params, phy);
+
}
static void bnx2x_set_warpcore_loopback(struct bnx2x_phy *phy,
@@ -6296,15 +6358,7 @@
vars->mac_type = MAC_TYPE_NONE;
/* Update shared memory */
- vars->link_status &= ~(LINK_STATUS_SPEED_AND_DUPLEX_MASK |
- LINK_STATUS_LINK_UP |
- LINK_STATUS_PHYSICAL_LINK_FLAG |
- LINK_STATUS_AUTO_NEGOTIATE_COMPLETE |
- LINK_STATUS_RX_FLOW_CONTROL_FLAG_MASK |
- LINK_STATUS_TX_FLOW_CONTROL_FLAG_MASK |
- LINK_STATUS_PARALLEL_DETECTION_FLAG_MASK |
- LINK_STATUS_LINK_PARTNER_SYMMETRIC_PAUSE |
- LINK_STATUS_LINK_PARTNER_ASYMMETRIC_PAUSE);
+ vars->link_status &= ~LINK_UPDATE_MASK;
vars->line_speed = 0;
bnx2x_update_mng(params, vars->link_status);
@@ -6452,6 +6506,7 @@
u16 ext_phy_line_speed = 0, prev_line_speed = vars->line_speed;
u8 active_external_phy = INT_PHY;
vars->phy_flags &= ~PHY_HALF_OPEN_CONN_FLAG;
+ vars->link_status &= ~LINK_UPDATE_MASK;
for (phy_index = INT_PHY; phy_index < params->num_phys;
phy_index++) {
phy_vars[phy_index].flow_ctrl = 0;
@@ -7579,7 +7634,7 @@
static int bnx2x_warpcore_read_sfp_module_eeprom(struct bnx2x_phy *phy,
struct link_params *params,
u16 addr, u8 byte_cnt,
- u8 *o_buf)
+ u8 *o_buf, u8 is_init)
{
int rc = 0;
u8 i, j = 0, cnt = 0;
@@ -7596,10 +7651,10 @@
/* 4 byte aligned address */
addr32 = addr & (~0x3);
do {
- if (cnt == I2C_WA_PWR_ITER) {
+ if ((!is_init) && (cnt == I2C_WA_PWR_ITER)) {
bnx2x_warpcore_power_module(params, phy, 0);
/* Note that 100us are not enough here */
- usleep_range(1000,1000);
+ usleep_range(1000, 2000);
bnx2x_warpcore_power_module(params, phy, 1);
}
rc = bnx2x_bsc_read(params, phy, 0xa0, addr32, 0, byte_cnt,
@@ -7719,7 +7774,7 @@
break;
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT:
rc = bnx2x_warpcore_read_sfp_module_eeprom(phy, params, addr,
- byte_cnt, o_buf);
+ byte_cnt, o_buf, 0);
break;
}
return rc;
@@ -7923,6 +7978,7 @@
{
u8 val;
+ int rc;
struct bnx2x *bp = params->bp;
u16 timeout;
/* Initialization time after hot-plug may take up to 300ms for
@@ -7930,8 +7986,14 @@
*/
for (timeout = 0; timeout < 60; timeout++) {
- if (bnx2x_read_sfp_module_eeprom(phy, params, 1, 1, &val)
- == 0) {
+ if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT)
+ rc = bnx2x_warpcore_read_sfp_module_eeprom(phy,
+ params, 1,
+ 1, &val, 1);
+ else
+ rc = bnx2x_read_sfp_module_eeprom(phy, params, 1, 1,
+ &val);
+ if (rc == 0) {
DP(NETIF_MSG_LINK,
"SFP+ module initialization took %d ms\n",
timeout * 5);
@@ -7939,7 +8001,8 @@
}
usleep_range(5000, 10000);
}
- return -EINVAL;
+ rc = bnx2x_read_sfp_module_eeprom(phy, params, 1, 1, &val);
+ return rc;
}
static void bnx2x_8727_power_module(struct bnx2x *bp,
@@ -9878,7 +9941,7 @@
else
rc = bnx2x_8483x_disable_eee(phy, params, vars);
if (rc) {
- DP(NETIF_MSG_LINK, "Failed to set EEE advertisment\n");
+ DP(NETIF_MSG_LINK, "Failed to set EEE advertisement\n");
return rc;
}
} else {
@@ -10993,7 +11056,7 @@
.format_fw_ver = (format_fw_ver_t)NULL,
.hw_reset = (hw_reset_t)NULL,
.set_link_led = (set_link_led_t)NULL,
- .phy_specific_func = (phy_specific_func_t)NULL
+ .phy_specific_func = (phy_specific_func_t)bnx2x_xgxs_specific_func
};
static struct bnx2x_phy phy_warpcore = {
.type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT,
@@ -11465,6 +11528,11 @@
phy->media_type = ETH_PHY_BASE_T;
break;
case PORT_HW_CFG_NET_SERDES_IF_XFI:
+ phy->supported &= (SUPPORTED_1000baseT_Full |
+ SUPPORTED_10000baseT_Full |
+ SUPPORTED_FIBRE |
+ SUPPORTED_Pause |
+ SUPPORTED_Asym_Pause);
phy->media_type = ETH_PHY_XFP_FIBER;
break;
case PORT_HW_CFG_NET_SERDES_IF_SFI:
@@ -12919,7 +12987,7 @@
DP(NETIF_MSG_LINK, "Analyze TX Fault\n");
break;
default:
- DP(NETIF_MSG_LINK, "Analyze UNKOWN\n");
+ DP(NETIF_MSG_LINK, "Analyze UNKNOWN\n");
}
DP(NETIF_MSG_LINK, "Link changed:[%x %x]->%x\n", vars->link_up,
old_status, status);
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index d5648fc..01611b3 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -6794,8 +6794,9 @@
bnx2x_init_block(bp, BLOCK_DORQ, init_phase);
+ bnx2x_init_block(bp, BLOCK_BRB1, init_phase);
+
if (CHIP_IS_E1(bp) || CHIP_IS_E1H(bp)) {
- bnx2x_init_block(bp, BLOCK_BRB1, init_phase);
if (IS_MF(bp))
low = ((bp->flags & ONE_PORT_FLAG) ? 160 : 246);
@@ -9544,10 +9545,13 @@
*/
static void __devinit bnx2x_prev_interrupted_dmae(struct bnx2x *bp)
{
- u32 val = REG_RD(bp, PGLUE_B_REG_PGLUE_B_INT_STS);
- if (val & PGLUE_B_PGLUE_B_INT_STS_REG_WAS_ERROR_ATTN) {
- BNX2X_ERR("was error bit was found to be set in pglueb upon startup. Clearing");
- REG_WR(bp, PGLUE_B_REG_WAS_ERROR_PF_7_0_CLR, 1 << BP_FUNC(bp));
+ if (!CHIP_IS_E1x(bp)) {
+ u32 val = REG_RD(bp, PGLUE_B_REG_PGLUE_B_INT_STS);
+ if (val & PGLUE_B_PGLUE_B_INT_STS_REG_WAS_ERROR_ATTN) {
+ BNX2X_ERR("was error bit was found to be set in pglueb upon startup. Clearing");
+ REG_WR(bp, PGLUE_B_REG_WAS_ERROR_PF_7_0_CLR,
+ 1 << BP_FUNC(bp));
+ }
}
}
@@ -11902,7 +11906,15 @@
/* disable FCOE L2 queue for E1x */
if (CHIP_IS_E1x(bp))
bp->flags |= NO_FCOE_FLAG;
-
+ /* disable FCOE for 57840 device, until FW supports it */
+ switch (ent->driver_data) {
+ case BCM57840_O:
+ case BCM57840_4_10:
+ case BCM57840_2_20:
+ case BCM57840_MFO:
+ case BCM57840_MF:
+ bp->flags |= NO_FCOE_FLAG;
+ }
#endif
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
index a4da893..378988b 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
@@ -251,6 +251,8 @@
unsigned char rev; /* chip revision */
unsigned char offload;
+ unsigned char bypass;
+
unsigned int ofldq_wr_cred;
};
@@ -642,6 +644,23 @@
#define for_each_port(adapter, iter) \
for (iter = 0; iter < (adapter)->params.nports; ++iter)
+static inline int is_bypass(struct adapter *adap)
+{
+ return adap->params.bypass;
+}
+
+static inline int is_bypass_device(int device)
+{
+ /* this should be set based upon device capabilities */
+ switch (device) {
+ case 0x440b:
+ case 0x440c:
+ return 1;
+ default:
+ return 0;
+ }
+}
+
static inline unsigned int core_ticks_per_usec(const struct adapter *adap)
{
return adap->params.vpd.cclk / 1000;
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
index 604f4f8..0df1284 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
@@ -3416,16 +3416,6 @@
finicsum, cfcsum);
/*
- * If we're a pure NIC driver then disable all offloading facilities.
- * This will allow the firmware to optimize aspects of the hardware
- * configuration which will result in improved performance.
- */
- caps_cmd.ofldcaps = 0;
- caps_cmd.iscsicaps = 0;
- caps_cmd.rdmacaps = 0;
- caps_cmd.fcoecaps = 0;
-
- /*
* And now tell the firmware to use the configuration we just loaded.
*/
caps_cmd.op_to_write =
@@ -3513,18 +3503,6 @@
if (ret < 0)
goto bye;
-#ifndef CONFIG_CHELSIO_T4_OFFLOAD
- /*
- * If we're a pure NIC driver then disable all offloading facilities.
- * This will allow the firmware to optimize aspects of the hardware
- * configuration which will result in improved performance.
- */
- caps_cmd.ofldcaps = 0;
- caps_cmd.iscsicaps = 0;
- caps_cmd.rdmacaps = 0;
- caps_cmd.fcoecaps = 0;
-#endif
-
if (caps_cmd.niccaps & htons(FW_CAPS_CONFIG_NIC_VM)) {
if (!vf_acls)
caps_cmd.niccaps ^= htons(FW_CAPS_CONFIG_NIC_VM);
@@ -3745,6 +3723,7 @@
u32 v, port_vec;
enum dev_state state;
u32 params[7], val[7];
+ struct fw_caps_config_cmd caps_cmd;
int reset = 1, j;
/*
@@ -3898,6 +3877,9 @@
goto bye;
}
+ if (is_bypass_device(adap->pdev->device))
+ adap->params.bypass = 1;
+
/*
* Grab some of our basic fundamental operating parameters.
*/
@@ -3940,13 +3922,12 @@
adap->tids.aftid_end = val[1];
}
-#ifdef CONFIG_CHELSIO_T4_OFFLOAD
/*
* Get device capabilities so we can determine what resources we need
* to manage.
*/
memset(&caps_cmd, 0, sizeof(caps_cmd));
- caps_cmd.op_to_write = htonl(V_FW_CMD_OP(FW_CAPS_CONFIG_CMD) |
+ caps_cmd.op_to_write = htonl(FW_CMD_OP(FW_CAPS_CONFIG_CMD) |
FW_CMD_REQUEST | FW_CMD_READ);
caps_cmd.retval_len16 = htonl(FW_LEN16(caps_cmd));
ret = t4_wr_mbox(adap, adap->mbox, &caps_cmd, sizeof(caps_cmd),
@@ -3991,15 +3972,6 @@
adap->vres.ddp.size = val[4] - val[3] + 1;
adap->params.ofldq_wr_cred = val[5];
- params[0] = FW_PARAM_PFVF(ETHOFLD_START);
- params[1] = FW_PARAM_PFVF(ETHOFLD_END);
- ret = t4_query_params(adap, adap->mbox, adap->fn, 0, 2,
- params, val);
- if ((val[0] != val[1]) && (ret >= 0)) {
- adap->tids.uotid_base = val[0];
- adap->tids.nuotids = val[1] - val[0] + 1;
- }
-
adap->params.offload = 1;
}
if (caps_cmd.rdmacaps) {
@@ -4048,7 +4020,6 @@
}
#undef FW_PARAM_PFVF
#undef FW_PARAM_DEV
-#endif /* CONFIG_CHELSIO_T4_OFFLOAD */
/*
* These are finalized by FW initialization, load their values now.
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.h b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.h
index 1b899fe..39bec73 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.h
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.h
@@ -102,6 +102,9 @@
unsigned int ftid_base;
unsigned int aftid_base;
unsigned int aftid_end;
+ /* Server filter region */
+ unsigned int sftid_base;
+ unsigned int nsftids;
spinlock_t atid_lock ____cacheline_aligned_in_smp;
union aopen_entry *afree;
diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
index 32eec15..730ae2c 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
@@ -2519,6 +2519,7 @@
{
struct fw_bye_cmd c;
+ memset(&c, 0, sizeof(c));
INIT_CMD(c, BYE, WRITE);
return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
}
@@ -2535,6 +2536,7 @@
{
struct fw_initialize_cmd c;
+ memset(&c, 0, sizeof(c));
INIT_CMD(c, INITIALIZE, WRITE);
return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
}
@@ -2551,6 +2553,7 @@
{
struct fw_reset_cmd c;
+ memset(&c, 0, sizeof(c));
INIT_CMD(c, RESET, WRITE);
c.val = htonl(reset);
return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
@@ -2828,7 +2831,7 @@
HOSTPAGESIZEPF7(sge_hps));
t4_set_reg_field(adap, SGE_CONTROL,
- INGPADBOUNDARY(INGPADBOUNDARY_MASK) |
+ INGPADBOUNDARY_MASK |
EGRSTATUSPAGESIZE_MASK,
INGPADBOUNDARY(fl_align_log - 5) |
EGRSTATUSPAGESIZE(stat_len != 64));
@@ -3278,6 +3281,7 @@
{
struct fw_vi_enable_cmd c;
+ memset(&c, 0, sizeof(c));
c.op_to_viid = htonl(FW_CMD_OP(FW_VI_ENABLE_CMD) | FW_CMD_REQUEST |
FW_CMD_EXEC | FW_VI_ENABLE_CMD_VIID(viid));
c.ien_to_len16 = htonl(FW_VI_ENABLE_CMD_LED | FW_LEN16(c));
diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c
index 1d03dcd..19ac096 100644
--- a/drivers/net/ethernet/freescale/gianfar.c
+++ b/drivers/net/ethernet/freescale/gianfar.c
@@ -1353,8 +1353,11 @@
struct gfar_private *priv = dev_get_drvdata(dev);
struct net_device *ndev = priv->ndev;
- if (!netif_running(ndev))
+ if (!netif_running(ndev)) {
+ netif_device_attach(ndev);
+
return 0;
+ }
gfar_init_bds(ndev);
init_registers(ndev);
diff --git a/drivers/net/ethernet/freescale/gianfar_ptp.c b/drivers/net/ethernet/freescale/gianfar_ptp.c
index b9db0e0..2e5daee 100644
--- a/drivers/net/ethernet/freescale/gianfar_ptp.c
+++ b/drivers/net/ethernet/freescale/gianfar_ptp.c
@@ -478,7 +478,7 @@
pr_err("no resource\n");
goto no_resource;
}
- if (request_resource(&ioport_resource, etsects->rsrc)) {
+ if (request_resource(&iomem_resource, etsects->rsrc)) {
pr_err("resource busy\n");
goto no_resource;
}
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
index 56b20d1..116f0e9 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
@@ -2673,6 +2673,9 @@
case ixgbe_mac_X540:
case ixgbe_mac_82599EB:
info->so_timestamping =
+ SOF_TIMESTAMPING_TX_SOFTWARE |
+ SOF_TIMESTAMPING_RX_SOFTWARE |
+ SOF_TIMESTAMPING_SOFTWARE |
SOF_TIMESTAMPING_TX_HARDWARE |
SOF_TIMESTAMPING_RX_HARDWARE |
SOF_TIMESTAMPING_RAW_HARDWARE;
diff --git a/drivers/net/ethernet/jme.c b/drivers/net/ethernet/jme.c
index f8064df..60ac46f 100644
--- a/drivers/net/ethernet/jme.c
+++ b/drivers/net/ethernet/jme.c
@@ -1860,10 +1860,14 @@
jme_clear_pm(jme);
JME_NAPI_ENABLE(jme);
- tasklet_enable(&jme->linkch_task);
- tasklet_enable(&jme->txclean_task);
- tasklet_hi_enable(&jme->rxclean_task);
- tasklet_hi_enable(&jme->rxempty_task);
+ tasklet_init(&jme->linkch_task, jme_link_change_tasklet,
+ (unsigned long) jme);
+ tasklet_init(&jme->txclean_task, jme_tx_clean_tasklet,
+ (unsigned long) jme);
+ tasklet_init(&jme->rxclean_task, jme_rx_clean_tasklet,
+ (unsigned long) jme);
+ tasklet_init(&jme->rxempty_task, jme_rx_empty_tasklet,
+ (unsigned long) jme);
rc = jme_request_irq(jme);
if (rc)
@@ -1948,10 +1952,10 @@
JME_NAPI_DISABLE(jme);
- tasklet_disable(&jme->linkch_task);
- tasklet_disable(&jme->txclean_task);
- tasklet_disable(&jme->rxclean_task);
- tasklet_disable(&jme->rxempty_task);
+ tasklet_kill(&jme->linkch_task);
+ tasklet_kill(&jme->txclean_task);
+ tasklet_kill(&jme->rxclean_task);
+ tasklet_kill(&jme->rxempty_task);
jme_disable_rx_engine(jme);
jme_disable_tx_engine(jme);
@@ -3079,22 +3083,6 @@
tasklet_init(&jme->pcc_task,
jme_pcc_tasklet,
(unsigned long) jme);
- tasklet_init(&jme->linkch_task,
- jme_link_change_tasklet,
- (unsigned long) jme);
- tasklet_init(&jme->txclean_task,
- jme_tx_clean_tasklet,
- (unsigned long) jme);
- tasklet_init(&jme->rxclean_task,
- jme_rx_clean_tasklet,
- (unsigned long) jme);
- tasklet_init(&jme->rxempty_task,
- jme_rx_empty_tasklet,
- (unsigned long) jme);
- tasklet_disable_nosync(&jme->linkch_task);
- tasklet_disable_nosync(&jme->txclean_task);
- tasklet_disable_nosync(&jme->rxclean_task);
- tasklet_disable_nosync(&jme->rxempty_task);
jme->dpi.cur = PCC_P1;
jme->reg_ghc = 0;
diff --git a/drivers/net/ethernet/marvell/skge.c b/drivers/net/ethernet/marvell/skge.c
index 9b9c2ac..d19a143 100644
--- a/drivers/net/ethernet/marvell/skge.c
+++ b/drivers/net/ethernet/marvell/skge.c
@@ -4026,7 +4026,7 @@
dev0 = hw->dev[0];
unregister_netdev(dev0);
- tasklet_disable(&hw->phy_task);
+ tasklet_kill(&hw->phy_task);
spin_lock_irq(&hw->hw_lock);
hw->intr_mask = 0;
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_tx.c b/drivers/net/ethernet/mellanox/mlx4/en_tx.c
index c10e3a6..b35094c 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_tx.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_tx.c
@@ -143,7 +143,6 @@
mlx4_bf_free(mdev->dev, &ring->bf);
mlx4_qp_remove(mdev->dev, &ring->qp);
mlx4_qp_free(mdev->dev, &ring->qp);
- mlx4_qp_release_range(mdev->dev, ring->qpn, 1);
mlx4_en_unmap_buffer(&ring->wqres.buf);
mlx4_free_hwq_res(mdev->dev, &ring->wqres, ring->buf_size);
kfree(ring->bounce_buf);
@@ -712,7 +711,7 @@
if (bounce)
tx_desc = mlx4_en_bounce_to_desc(priv, ring, index, desc_size);
- if (ring->bf_enabled && desc_size <= MAX_BF && !bounce && !vlan_tag) {
+ if (ring->bf_enabled && desc_size <= MAX_BF && !bounce && !vlan_tx_tag_present(skb)) {
*(__be32 *) (&tx_desc->ctrl.vlan_tag) |= cpu_to_be32(ring->doorbell_qpn);
op_own |= htonl((bf_index & 0xffff) << 8);
/* Ensure new descirptor hits memory
diff --git a/drivers/net/ethernet/mellanox/mlx4/eq.c b/drivers/net/ethernet/mellanox/mlx4/eq.c
index 51c7649..b84a88b 100644
--- a/drivers/net/ethernet/mellanox/mlx4/eq.c
+++ b/drivers/net/ethernet/mellanox/mlx4/eq.c
@@ -329,9 +329,6 @@
ctx = &priv->mfunc.master.slave_state[slave];
spin_lock_irqsave(&ctx->lock, flags);
- mlx4_dbg(dev, "%s: slave: %d, current state: %d new event :%d\n",
- __func__, slave, cur_state, event);
-
switch (cur_state) {
case SLAVE_PORT_DOWN:
if (MLX4_PORT_STATE_DEV_EVENT_PORT_UP == event)
@@ -366,9 +363,6 @@
goto out;
}
ret = mlx4_get_slave_port_state(dev, slave, port);
- mlx4_dbg(dev, "%s: slave: %d, current state: %d new event"
- " :%d gen_event: %d\n",
- __func__, slave, cur_state, event, *gen_event);
out:
spin_unlock_irqrestore(&ctx->lock, flags);
@@ -843,6 +837,18 @@
return priv->eq_table.uar_map[index] + 0x800 + 8 * (eq->eqn % 4);
}
+static void mlx4_unmap_uar(struct mlx4_dev *dev)
+{
+ struct mlx4_priv *priv = mlx4_priv(dev);
+ int i;
+
+ for (i = 0; i < mlx4_num_eq_uar(dev); ++i)
+ if (priv->eq_table.uar_map[i]) {
+ iounmap(priv->eq_table.uar_map[i]);
+ priv->eq_table.uar_map[i] = NULL;
+ }
+}
+
static int mlx4_create_eq(struct mlx4_dev *dev, int nent,
u8 intr, struct mlx4_eq *eq)
{
@@ -1207,6 +1213,7 @@
mlx4_free_irqs(dev);
err_out_bitmap:
+ mlx4_unmap_uar(dev);
mlx4_bitmap_cleanup(&priv->eq_table.bitmap);
err_out_free:
@@ -1231,10 +1238,7 @@
if (!mlx4_is_slave(dev))
mlx4_unmap_clr_int(dev);
- for (i = 0; i < mlx4_num_eq_uar(dev); ++i)
- if (priv->eq_table.uar_map[i])
- iounmap(priv->eq_table.uar_map[i]);
-
+ mlx4_unmap_uar(dev);
mlx4_bitmap_cleanup(&priv->eq_table.bitmap);
kfree(priv->eq_table.uar_map);
diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c
index 80df2ab..2aa80af 100644
--- a/drivers/net/ethernet/mellanox/mlx4/main.c
+++ b/drivers/net/ethernet/mellanox/mlx4/main.c
@@ -1405,7 +1405,10 @@
unmap_bf_area(dev);
err_close:
- mlx4_close_hca(dev);
+ if (mlx4_is_slave(dev))
+ mlx4_slave_exit(dev);
+ else
+ mlx4_CLOSE_HCA(dev, 0);
err_free_icm:
if (!mlx4_is_slave(dev))
diff --git a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c
index 926c911..b05705f 100644
--- a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c
+++ b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c
@@ -330,9 +330,6 @@
new_index = priv->virt2phys_pkey[slave][port - 1][orig_index];
*(u8 *)(inbox->buf + 35) = new_index;
-
- mlx4_dbg(dev, "port = %d, orig pkey index = %d, "
- "new pkey index = %d\n", port, orig_index, new_index);
}
static void update_gid(struct mlx4_dev *dev, struct mlx4_cmd_mailbox *inbox,
@@ -351,9 +348,6 @@
if (optpar & MLX4_QP_OPTPAR_ALT_ADDR_PATH)
qp_ctx->alt_path.mgid_index = slave & 0x7F;
}
-
- mlx4_dbg(dev, "slave %d, new gid index: 0x%x ",
- slave, qp_ctx->pri_path.mgid_index);
}
static int mpt_mask(struct mlx4_dev *dev)
diff --git a/drivers/net/ethernet/micrel/ksz884x.c b/drivers/net/ethernet/micrel/ksz884x.c
index 318fee9..69e0197 100644
--- a/drivers/net/ethernet/micrel/ksz884x.c
+++ b/drivers/net/ethernet/micrel/ksz884x.c
@@ -5407,8 +5407,8 @@
/* Delay for receive task to stop scheduling itself. */
msleep(2000 / HZ);
- tasklet_disable(&hw_priv->rx_tasklet);
- tasklet_disable(&hw_priv->tx_tasklet);
+ tasklet_kill(&hw_priv->rx_tasklet);
+ tasklet_kill(&hw_priv->tx_tasklet);
free_irq(dev->irq, hw_priv->dev);
transmit_cleanup(hw_priv, 0);
@@ -5459,8 +5459,10 @@
rc = request_irq(dev->irq, netdev_intr, IRQF_SHARED, dev->name, dev);
if (rc)
return rc;
- tasklet_enable(&hw_priv->rx_tasklet);
- tasklet_enable(&hw_priv->tx_tasklet);
+ tasklet_init(&hw_priv->rx_tasklet, rx_proc_task,
+ (unsigned long) hw_priv);
+ tasklet_init(&hw_priv->tx_tasklet, tx_proc_task,
+ (unsigned long) hw_priv);
hw->promiscuous = 0;
hw->all_multi = 0;
@@ -7033,16 +7035,6 @@
spin_lock_init(&hw_priv->hwlock);
mutex_init(&hw_priv->lock);
- /* tasklet is enabled. */
- tasklet_init(&hw_priv->rx_tasklet, rx_proc_task,
- (unsigned long) hw_priv);
- tasklet_init(&hw_priv->tx_tasklet, tx_proc_task,
- (unsigned long) hw_priv);
-
- /* tasklet_enable will decrement the atomic counter. */
- tasklet_disable(&hw_priv->rx_tasklet);
- tasklet_disable(&hw_priv->tx_tasklet);
-
for (i = 0; i < TOTAL_PORT_NUM; i++)
init_waitqueue_head(&hw_priv->counter[i].counter);
diff --git a/drivers/net/ethernet/nxp/lpc_eth.c b/drivers/net/ethernet/nxp/lpc_eth.c
index 53743f7..af8b414 100644
--- a/drivers/net/ethernet/nxp/lpc_eth.c
+++ b/drivers/net/ethernet/nxp/lpc_eth.c
@@ -1524,6 +1524,7 @@
pldat->dma_buff_base_p);
free_irq(ndev->irq, ndev);
iounmap(pldat->net_base);
+ mdiobus_unregister(pldat->mii_bus);
mdiobus_free(pldat->mii_bus);
clk_disable(pldat->clk);
clk_put(pldat->clk);
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
index b2a94d0..4c4fe5b 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
@@ -339,26 +339,6 @@
}
/**
- * pch_gbe_wait_clr_bit_irq - Wait to clear a bit for interrupt context
- * @reg: Pointer of register
- * @busy: Busy bit
- */
-static int pch_gbe_wait_clr_bit_irq(void *reg, u32 bit)
-{
- u32 tmp;
- int ret = -1;
- /* wait busy */
- tmp = 20;
- while ((ioread32(reg) & bit) && --tmp)
- udelay(5);
- if (!tmp)
- pr_err("Error: busy bit is not cleared\n");
- else
- ret = 0;
- return ret;
-}
-
-/**
* pch_gbe_mac_mar_set - Set MAC address register
* @hw: Pointer to the HW structure
* @addr: Pointer to the MAC address
@@ -409,15 +389,20 @@
return;
}
-static void pch_gbe_mac_reset_rx(struct pch_gbe_hw *hw)
+static void pch_gbe_disable_mac_rx(struct pch_gbe_hw *hw)
{
- /* Read the MAC addresses. and store to the private data */
- pch_gbe_mac_read_mac_addr(hw);
- iowrite32(PCH_GBE_RX_RST, &hw->reg->RESET);
- pch_gbe_wait_clr_bit_irq(&hw->reg->RESET, PCH_GBE_RX_RST);
- /* Setup the MAC addresses */
- pch_gbe_mac_mar_set(hw, hw->mac.addr, 0);
- return;
+ u32 rctl;
+ /* Disables Receive MAC */
+ rctl = ioread32(&hw->reg->MAC_RX_EN);
+ iowrite32((rctl & ~PCH_GBE_MRE_MAC_RX_EN), &hw->reg->MAC_RX_EN);
+}
+
+static void pch_gbe_enable_mac_rx(struct pch_gbe_hw *hw)
+{
+ u32 rctl;
+ /* Enables Receive MAC */
+ rctl = ioread32(&hw->reg->MAC_RX_EN);
+ iowrite32((rctl | PCH_GBE_MRE_MAC_RX_EN), &hw->reg->MAC_RX_EN);
}
/**
@@ -913,7 +898,7 @@
static void pch_gbe_configure_rx(struct pch_gbe_adapter *adapter)
{
struct pch_gbe_hw *hw = &adapter->hw;
- u32 rdba, rdlen, rctl, rxdma;
+ u32 rdba, rdlen, rxdma;
pr_debug("dma adr = 0x%08llx size = 0x%08x\n",
(unsigned long long)adapter->rx_ring->dma,
@@ -921,9 +906,7 @@
pch_gbe_mac_force_mac_fc(hw);
- /* Disables Receive MAC */
- rctl = ioread32(&hw->reg->MAC_RX_EN);
- iowrite32((rctl & ~PCH_GBE_MRE_MAC_RX_EN), &hw->reg->MAC_RX_EN);
+ pch_gbe_disable_mac_rx(hw);
/* Disables Receive DMA */
rxdma = ioread32(&hw->reg->DMA_CTRL);
@@ -1316,38 +1299,17 @@
spin_unlock_irqrestore(&adapter->stats_lock, flags);
}
-static void pch_gbe_stop_receive(struct pch_gbe_adapter *adapter)
+static void pch_gbe_disable_dma_rx(struct pch_gbe_hw *hw)
{
- struct pch_gbe_hw *hw = &adapter->hw;
u32 rxdma;
- u16 value;
- int ret;
/* Disable Receive DMA */
rxdma = ioread32(&hw->reg->DMA_CTRL);
rxdma &= ~PCH_GBE_RX_DMA_EN;
iowrite32(rxdma, &hw->reg->DMA_CTRL);
- /* Wait Rx DMA BUS is IDLE */
- ret = pch_gbe_wait_clr_bit_irq(&hw->reg->RX_DMA_ST, PCH_GBE_IDLE_CHECK);
- if (ret) {
- /* Disable Bus master */
- pci_read_config_word(adapter->pdev, PCI_COMMAND, &value);
- value &= ~PCI_COMMAND_MASTER;
- pci_write_config_word(adapter->pdev, PCI_COMMAND, value);
- /* Stop Receive */
- pch_gbe_mac_reset_rx(hw);
- /* Enable Bus master */
- value |= PCI_COMMAND_MASTER;
- pci_write_config_word(adapter->pdev, PCI_COMMAND, value);
- } else {
- /* Stop Receive */
- pch_gbe_mac_reset_rx(hw);
- }
- /* reprogram multicast address register after reset */
- pch_gbe_set_multi(adapter->netdev);
}
-static void pch_gbe_start_receive(struct pch_gbe_hw *hw)
+static void pch_gbe_enable_dma_rx(struct pch_gbe_hw *hw)
{
u32 rxdma;
@@ -1355,9 +1317,6 @@
rxdma = ioread32(&hw->reg->DMA_CTRL);
rxdma |= PCH_GBE_RX_DMA_EN;
iowrite32(rxdma, &hw->reg->DMA_CTRL);
- /* Enables Receive */
- iowrite32(PCH_GBE_MRE_MAC_RX_EN, &hw->reg->MAC_RX_EN);
- return;
}
/**
@@ -1393,7 +1352,7 @@
int_en = ioread32(&hw->reg->INT_EN);
iowrite32((int_en & ~PCH_GBE_INT_RX_FIFO_ERR),
&hw->reg->INT_EN);
- pch_gbe_stop_receive(adapter);
+ pch_gbe_disable_dma_rx(&adapter->hw);
int_st |= ioread32(&hw->reg->INT_ST);
int_st = int_st & ioread32(&hw->reg->INT_EN);
}
@@ -1971,12 +1930,12 @@
struct net_device *netdev = adapter->netdev;
struct pch_gbe_tx_ring *tx_ring = adapter->tx_ring;
struct pch_gbe_rx_ring *rx_ring = adapter->rx_ring;
- int err;
+ int err = -EINVAL;
/* Ensure we have a valid MAC */
if (!is_valid_ether_addr(adapter->hw.mac.addr)) {
pr_err("Error: Invalid MAC address\n");
- return -EINVAL;
+ goto out;
}
/* hardware has been reset, we need to reload some things */
@@ -1989,18 +1948,19 @@
err = pch_gbe_request_irq(adapter);
if (err) {
- pr_err("Error: can't bring device up\n");
- return err;
+ pr_err("Error: can't bring device up - irq request failed\n");
+ goto out;
}
err = pch_gbe_alloc_rx_buffers_pool(adapter, rx_ring, rx_ring->count);
if (err) {
- pr_err("Error: can't bring device up\n");
- return err;
+ pr_err("Error: can't bring device up - alloc rx buffers pool failed\n");
+ goto freeirq;
}
pch_gbe_alloc_tx_buffers(adapter, tx_ring);
pch_gbe_alloc_rx_buffers(adapter, rx_ring, rx_ring->count);
adapter->tx_queue_len = netdev->tx_queue_len;
- pch_gbe_start_receive(&adapter->hw);
+ pch_gbe_enable_dma_rx(&adapter->hw);
+ pch_gbe_enable_mac_rx(&adapter->hw);
mod_timer(&adapter->watchdog_timer, jiffies);
@@ -2009,6 +1969,11 @@
netif_start_queue(adapter->netdev);
return 0;
+
+freeirq:
+ pch_gbe_free_irq(adapter);
+out:
+ return err;
}
/**
@@ -2405,7 +2370,6 @@
int work_done = 0;
bool poll_end_flag = false;
bool cleaned = false;
- u32 int_en;
pr_debug("budget : %d\n", budget);
@@ -2422,19 +2386,13 @@
if (poll_end_flag) {
napi_complete(napi);
- if (adapter->rx_stop_flag) {
- adapter->rx_stop_flag = false;
- pch_gbe_start_receive(&adapter->hw);
- }
pch_gbe_irq_enable(adapter);
- } else
- if (adapter->rx_stop_flag) {
- adapter->rx_stop_flag = false;
- pch_gbe_start_receive(&adapter->hw);
- int_en = ioread32(&adapter->hw.reg->INT_EN);
- iowrite32((int_en | PCH_GBE_INT_RX_FIFO_ERR),
- &adapter->hw.reg->INT_EN);
- }
+ }
+
+ if (adapter->rx_stop_flag) {
+ adapter->rx_stop_flag = false;
+ pch_gbe_enable_dma_rx(&adapter->hw);
+ }
pr_debug("poll_end_flag : %d work_done : %d budget : %d\n",
poll_end_flag, work_done, budget);
diff --git a/drivers/net/ethernet/qlogic/qla3xxx.c b/drivers/net/ethernet/qlogic/qla3xxx.c
index df09b1c..6407d0d 100644
--- a/drivers/net/ethernet/qlogic/qla3xxx.c
+++ b/drivers/net/ethernet/qlogic/qla3xxx.c
@@ -2525,6 +2525,13 @@
qdev->req_q_size =
(u32) (NUM_REQ_Q_ENTRIES * sizeof(struct ob_mac_iocb_req));
+ qdev->rsp_q_size = NUM_RSP_Q_ENTRIES * sizeof(struct net_rsp_iocb);
+
+ /* The barrier is required to ensure request and response queue
+ * addr writes to the registers.
+ */
+ wmb();
+
qdev->req_q_virt_addr =
pci_alloc_consistent(qdev->pdev,
(size_t) qdev->req_q_size,
@@ -2536,8 +2543,6 @@
return -ENOMEM;
}
- qdev->rsp_q_size = NUM_RSP_Q_ENTRIES * sizeof(struct net_rsp_iocb);
-
qdev->rsp_q_virt_addr =
pci_alloc_consistent(qdev->pdev,
(size_t) qdev->rsp_q_size,
diff --git a/drivers/net/ethernet/realtek/8139cp.c b/drivers/net/ethernet/realtek/8139cp.c
index 1c81825..b01f83a0 100644
--- a/drivers/net/ethernet/realtek/8139cp.c
+++ b/drivers/net/ethernet/realtek/8139cp.c
@@ -979,17 +979,6 @@
cpw32_f (MAC0 + 0, le32_to_cpu (*(__le32 *) (dev->dev_addr + 0)));
cpw32_f (MAC0 + 4, le32_to_cpu (*(__le32 *) (dev->dev_addr + 4)));
- cpw32_f(HiTxRingAddr, 0);
- cpw32_f(HiTxRingAddr + 4, 0);
-
- ring_dma = cp->ring_dma;
- cpw32_f(RxRingAddr, ring_dma & 0xffffffff);
- cpw32_f(RxRingAddr + 4, (ring_dma >> 16) >> 16);
-
- ring_dma += sizeof(struct cp_desc) * CP_RX_RING_SIZE;
- cpw32_f(TxRingAddr, ring_dma & 0xffffffff);
- cpw32_f(TxRingAddr + 4, (ring_dma >> 16) >> 16);
-
cp_start_hw(cp);
cpw8(TxThresh, 0x06); /* XXX convert magic num to a constant */
@@ -1003,6 +992,17 @@
cpw8(Config5, cpr8(Config5) & PMEStatus);
+ cpw32_f(HiTxRingAddr, 0);
+ cpw32_f(HiTxRingAddr + 4, 0);
+
+ ring_dma = cp->ring_dma;
+ cpw32_f(RxRingAddr, ring_dma & 0xffffffff);
+ cpw32_f(RxRingAddr + 4, (ring_dma >> 16) >> 16);
+
+ ring_dma += sizeof(struct cp_desc) * CP_RX_RING_SIZE;
+ cpw32_f(TxRingAddr, ring_dma & 0xffffffff);
+ cpw32_f(TxRingAddr + 4, (ring_dma >> 16) >> 16);
+
cpw16(MultiIntr, 0);
cpw8_f(Cfg9346, Cfg9346_Lock);
diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c
index e7ff886e..927aa33 100644
--- a/drivers/net/ethernet/realtek/r8169.c
+++ b/drivers/net/ethernet/realtek/r8169.c
@@ -3827,6 +3827,8 @@
void __iomem *ioaddr = tp->mmio_addr;
switch (tp->mac_version) {
+ case RTL_GIGA_MAC_VER_25:
+ case RTL_GIGA_MAC_VER_26:
case RTL_GIGA_MAC_VER_29:
case RTL_GIGA_MAC_VER_30:
case RTL_GIGA_MAC_VER_32:
@@ -4519,6 +4521,9 @@
mc_filter[1] = swab32(data);
}
+ if (tp->mac_version == RTL_GIGA_MAC_VER_35)
+ mc_filter[1] = mc_filter[0] = 0xffffffff;
+
RTL_W32(MAR0 + 4, mc_filter[1]);
RTL_W32(MAR0 + 0, mc_filter[0]);
diff --git a/drivers/net/ethernet/sis/sis900.c b/drivers/net/ethernet/sis/sis900.c
index fb9f6b3..edf5edb 100644
--- a/drivers/net/ethernet/sis/sis900.c
+++ b/drivers/net/ethernet/sis/sis900.c
@@ -2479,7 +2479,7 @@
netif_start_queue(net_dev);
/* Workaround for EDB */
- sis900_set_mode(ioaddr, HW_SPEED_10_MBPS, FDX_CAPABLE_HALF_SELECTED);
+ sis900_set_mode(sis_priv, HW_SPEED_10_MBPS, FDX_CAPABLE_HALF_SELECTED);
/* Enable all known interrupts by setting the interrupt mask. */
sw32(imr, RxSOVR | RxORN | RxERR | RxOK | TxURN | TxERR | TxIDLE);
diff --git a/drivers/net/ethernet/smsc/smsc911x.c b/drivers/net/ethernet/smsc/smsc911x.c
index 62d1baf..c53c0f4 100644
--- a/drivers/net/ethernet/smsc/smsc911x.c
+++ b/drivers/net/ethernet/smsc/smsc911x.c
@@ -2110,7 +2110,7 @@
static int __devinit smsc911x_init(struct net_device *dev)
{
struct smsc911x_data *pdata = netdev_priv(dev);
- unsigned int byte_test;
+ unsigned int byte_test, mask;
unsigned int to = 100;
SMSC_TRACE(pdata, probe, "Driver Parameters:");
@@ -2130,9 +2130,22 @@
/*
* poll the READY bit in PMT_CTRL. Any other access to the device is
* forbidden while this bit isn't set. Try for 100ms
+ *
+ * Note that this test is done before the WORD_SWAP register is
+ * programmed. So in some configurations the READY bit is at 16 before
+ * WORD_SWAP is written to. This issue is worked around by waiting
+ * until either bit 0 or bit 16 gets set in PMT_CTRL.
+ *
+ * SMSC has confirmed that checking bit 16 (marked as reserved in
+ * the datasheet) is fine since these bits "will either never be set
+ * or can only go high after READY does (so also indicate the device
+ * is ready)".
*/
- while (!(smsc911x_reg_read(pdata, PMT_CTRL) & PMT_CTRL_READY_) && --to)
+
+ mask = PMT_CTRL_READY_ | swahw32(PMT_CTRL_READY_);
+ while (!(smsc911x_reg_read(pdata, PMT_CTRL) & mask) && --to)
udelay(1000);
+
if (to == 0) {
pr_err("Device not READY in 100ms aborting\n");
return -ENODEV;
diff --git a/drivers/net/ethernet/ti/Kconfig b/drivers/net/ethernet/ti/Kconfig
index b26cbda..2c41894 100644
--- a/drivers/net/ethernet/ti/Kconfig
+++ b/drivers/net/ethernet/ti/Kconfig
@@ -5,7 +5,7 @@
config NET_VENDOR_TI
bool "Texas Instruments (TI) devices"
default y
- depends on PCI || EISA || AR7 || (ARM && (ARCH_DAVINCI || ARCH_OMAP3))
+ depends on PCI || EISA || AR7 || (ARM && (ARCH_DAVINCI || ARCH_OMAP3 || SOC_AM33XX))
---help---
If you have a network (Ethernet) card belonging to this class, say Y
and read the Ethernet-HOWTO, available from
diff --git a/drivers/net/ethernet/tile/tilegx.c b/drivers/net/ethernet/tile/tilegx.c
index 4e2a162..66e025a 100644
--- a/drivers/net/ethernet/tile/tilegx.c
+++ b/drivers/net/ethernet/tile/tilegx.c
@@ -917,7 +917,7 @@
ingress_irq = rc;
tile_irq_activate(ingress_irq, TILE_IRQ_PERCPU);
rc = request_irq(ingress_irq, tile_net_handle_ingress_irq,
- 0, NULL, NULL);
+ 0, "tile_net", NULL);
if (rc != 0) {
netdev_err(dev, "request_irq failed: %d\n", rc);
destroy_irq(ingress_irq);
@@ -1334,11 +1334,11 @@
{
struct skb_shared_info *sh = skb_shinfo(skb);
unsigned int sh_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
- unsigned int data_len = skb->data_len + skb->hdr_len - sh_len;
+ unsigned int data_len = skb->len - sh_len;
unsigned int p_len = sh->gso_size;
long f_id = -1; /* id of the current fragment */
- long f_size = skb->hdr_len; /* size of the current fragment */
- long f_used = sh_len; /* bytes used from the current fragment */
+ long f_size = skb_headlen(skb) - sh_len; /* current fragment size */
+ long f_used = 0; /* bytes used from the current fragment */
long n; /* size of the current piece of payload */
int num_edescs = 0;
int segment;
@@ -1353,7 +1353,7 @@
/* Advance as needed. */
while (f_used >= f_size) {
f_id++;
- f_size = sh->frags[f_id].size;
+ f_size = skb_frag_size(&sh->frags[f_id]);
f_used = 0;
}
@@ -1384,13 +1384,13 @@
struct iphdr *ih;
struct tcphdr *th;
unsigned int sh_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
- unsigned int data_len = skb->data_len + skb->hdr_len - sh_len;
+ unsigned int data_len = skb->len - sh_len;
unsigned char *data = skb->data;
unsigned int ih_off, th_off, p_len;
unsigned int isum_seed, tsum_seed, id, seq;
long f_id = -1; /* id of the current fragment */
- long f_size = skb->hdr_len; /* size of the current fragment */
- long f_used = sh_len; /* bytes used from the current fragment */
+ long f_size = skb_headlen(skb) - sh_len; /* current fragment size */
+ long f_used = 0; /* bytes used from the current fragment */
long n; /* size of the current piece of payload */
int segment;
@@ -1405,7 +1405,7 @@
isum_seed = ((0xFFFF - ih->check) +
(0xFFFF - ih->tot_len) +
(0xFFFF - ih->id));
- tsum_seed = th->check + (0xFFFF ^ htons(sh_len + data_len));
+ tsum_seed = th->check + (0xFFFF ^ htons(skb->len));
id = ntohs(ih->id);
seq = ntohl(th->seq);
@@ -1444,7 +1444,7 @@
/* Advance as needed. */
while (f_used >= f_size) {
f_id++;
- f_size = sh->frags[f_id].size;
+ f_size = skb_frag_size(&sh->frags[f_id]);
f_used = 0;
}
@@ -1478,14 +1478,14 @@
struct tile_net_priv *priv = netdev_priv(dev);
struct skb_shared_info *sh = skb_shinfo(skb);
unsigned int sh_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
- unsigned int data_len = skb->data_len + skb->hdr_len - sh_len;
+ unsigned int data_len = skb->len - sh_len;
unsigned int p_len = sh->gso_size;
gxio_mpipe_edesc_t edesc_head = { { 0 } };
gxio_mpipe_edesc_t edesc_body = { { 0 } };
long f_id = -1; /* id of the current fragment */
- long f_size = skb->hdr_len; /* size of the current fragment */
- long f_used = sh_len; /* bytes used from the current fragment */
- void *f_data = skb->data;
+ long f_size = skb_headlen(skb) - sh_len; /* current fragment size */
+ long f_used = 0; /* bytes used from the current fragment */
+ void *f_data = skb->data + sh_len;
long n; /* size of the current piece of payload */
unsigned long tx_packets = 0, tx_bytes = 0;
unsigned int csum_start;
@@ -1516,15 +1516,18 @@
/* Egress the payload. */
while (p_used < p_len) {
+ void *va;
/* Advance as needed. */
while (f_used >= f_size) {
f_id++;
- f_size = sh->frags[f_id].size;
- f_used = 0;
+ f_size = skb_frag_size(&sh->frags[f_id]);
f_data = tile_net_frag_buf(&sh->frags[f_id]);
+ f_used = 0;
}
+ va = f_data + f_used;
+
/* Use bytes from the current fragment. */
n = p_len - p_used;
if (n > f_size - f_used)
@@ -1533,7 +1536,7 @@
p_used += n;
/* Egress a piece of the payload. */
- edesc_body.va = va_to_tile_io_addr(f_data) + f_used;
+ edesc_body.va = va_to_tile_io_addr(va);
edesc_body.xfer_size = n;
edesc_body.bound = !(p_used < p_len);
gxio_mpipe_equeue_put_at(equeue, edesc_body, slot);
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
index 0793299..a788501 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -894,6 +894,8 @@
return IRQ_HANDLED;
}
+static void axienet_dma_err_handler(unsigned long data);
+
/**
* axienet_open - Driver open routine.
* @ndev: Pointer to net_device structure
@@ -942,6 +944,10 @@
phy_start(lp->phy_dev);
}
+ /* Enable tasklets for Axi DMA error handling */
+ tasklet_init(&lp->dma_err_tasklet, axienet_dma_err_handler,
+ (unsigned long) lp);
+
/* Enable interrupts for Axi DMA Tx */
ret = request_irq(lp->tx_irq, axienet_tx_irq, 0, ndev->name, ndev);
if (ret)
@@ -950,8 +956,7 @@
ret = request_irq(lp->rx_irq, axienet_rx_irq, 0, ndev->name, ndev);
if (ret)
goto err_rx_irq;
- /* Enable tasklets for Axi DMA error handling */
- tasklet_enable(&lp->dma_err_tasklet);
+
return 0;
err_rx_irq:
@@ -960,6 +965,7 @@
if (lp->phy_dev)
phy_disconnect(lp->phy_dev);
lp->phy_dev = NULL;
+ tasklet_kill(&lp->dma_err_tasklet);
dev_err(lp->dev, "request_irq() failed\n");
return ret;
}
@@ -990,7 +996,7 @@
axienet_setoptions(ndev, lp->options &
~(XAE_OPTION_TXEN | XAE_OPTION_RXEN));
- tasklet_disable(&lp->dma_err_tasklet);
+ tasklet_kill(&lp->dma_err_tasklet);
free_irq(lp->tx_irq, ndev);
free_irq(lp->rx_irq, ndev);
@@ -1613,10 +1619,6 @@
goto err_iounmap_2;
}
- tasklet_init(&lp->dma_err_tasklet, axienet_dma_err_handler,
- (unsigned long) lp);
- tasklet_disable(&lp->dma_err_tasklet);
-
return 0;
err_iounmap_2:
diff --git a/drivers/net/ethernet/xscale/ixp4xx_eth.c b/drivers/net/ethernet/xscale/ixp4xx_eth.c
index 98934bd..477d672 100644
--- a/drivers/net/ethernet/xscale/ixp4xx_eth.c
+++ b/drivers/net/ethernet/xscale/ixp4xx_eth.c
@@ -1102,10 +1102,12 @@
{
int i;
- if (!ports_open)
- if (!(dma_pool = dma_pool_create(DRV_NAME, NULL,
- POOL_ALLOC_SIZE, 32, 0)))
+ if (!ports_open) {
+ dma_pool = dma_pool_create(DRV_NAME, &port->netdev->dev,
+ POOL_ALLOC_SIZE, 32, 0);
+ if (!dma_pool)
return -ENOMEM;
+ }
if (!(port->desc_tab = dma_pool_alloc(dma_pool, GFP_KERNEL,
&port->desc_tab_phys)))
diff --git a/drivers/net/irda/sir_dev.c b/drivers/net/irda/sir_dev.c
index 5039f08..43e9ab4 100644
--- a/drivers/net/irda/sir_dev.c
+++ b/drivers/net/irda/sir_dev.c
@@ -222,7 +222,7 @@
break;
case SIRDEV_STATE_DONGLE_SPEED:
- if (dev->dongle_drv->reset) {
+ if (dev->dongle_drv->set_speed) {
ret = dev->dongle_drv->set_speed(dev, fsm->param);
if (ret < 0) {
fsm->result = ret;
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 983bbf4..961f0b2 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -15,6 +15,11 @@
comment "MII PHY device drivers"
+config AT803X_PHY
+ tristate "Drivers for Atheros AT803X PHYs"
+ ---help---
+ Currently supports the AT8030 and AT8035 model
+
config AMD_PHY
tristate "Drivers for the AMD PHYs"
---help---
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index 426674d..9645e38 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -25,6 +25,7 @@
obj-$(CONFIG_MICREL_PHY) += micrel.o
obj-$(CONFIG_MDIO_OCTEON) += mdio-octeon.o
obj-$(CONFIG_MICREL_KS8995MA) += spi_ks8995.o
+obj-$(CONFIG_AT803X_PHY) += at803x.o
obj-$(CONFIG_AMD_PHY) += amd.o
obj-$(CONFIG_MDIO_BUS_MUX) += mdio-mux.o
obj-$(CONFIG_MDIO_BUS_MUX_GPIO) += mdio-mux-gpio.o
diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
new file mode 100644
index 0000000..45cbc10
--- /dev/null
+++ b/drivers/net/phy/at803x.c
@@ -0,0 +1,176 @@
+/*
+ * drivers/net/phy/at803x.c
+ *
+ * Driver for Atheros 803x PHY
+ *
+ * Author: Matus Ujhelyi <ujhelyi.m@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/phy.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+
+#define AT803X_INTR_ENABLE 0x12
+#define AT803X_INTR_STATUS 0x13
+#define AT803X_WOL_ENABLE 0x01
+#define AT803X_DEVICE_ADDR 0x03
+#define AT803X_LOC_MAC_ADDR_0_15_OFFSET 0x804C
+#define AT803X_LOC_MAC_ADDR_16_31_OFFSET 0x804B
+#define AT803X_LOC_MAC_ADDR_32_47_OFFSET 0x804A
+#define AT803X_MMD_ACCESS_CONTROL 0x0D
+#define AT803X_MMD_ACCESS_CONTROL_DATA 0x0E
+#define AT803X_FUNC_DATA 0x4003
+
+MODULE_DESCRIPTION("Atheros 803x PHY driver");
+MODULE_AUTHOR("Matus Ujhelyi");
+MODULE_LICENSE("GPL");
+
+static void at803x_set_wol_mac_addr(struct phy_device *phydev)
+{
+ struct net_device *ndev = phydev->attached_dev;
+ const u8 *mac;
+ unsigned int i, offsets[] = {
+ AT803X_LOC_MAC_ADDR_32_47_OFFSET,
+ AT803X_LOC_MAC_ADDR_16_31_OFFSET,
+ AT803X_LOC_MAC_ADDR_0_15_OFFSET,
+ };
+
+ if (!ndev)
+ return;
+
+ mac = (const u8 *) ndev->dev_addr;
+
+ if (!is_valid_ether_addr(mac))
+ return;
+
+ for (i = 0; i < 3; i++) {
+ phy_write(phydev, AT803X_MMD_ACCESS_CONTROL,
+ AT803X_DEVICE_ADDR);
+ phy_write(phydev, AT803X_MMD_ACCESS_CONTROL_DATA,
+ offsets[i]);
+ phy_write(phydev, AT803X_MMD_ACCESS_CONTROL,
+ AT803X_FUNC_DATA);
+ phy_write(phydev, AT803X_MMD_ACCESS_CONTROL_DATA,
+ mac[(i * 2) + 1] | (mac[(i * 2)] << 8));
+ }
+}
+
+static int at803x_config_init(struct phy_device *phydev)
+{
+ int val;
+ u32 features;
+ int status;
+
+ features = SUPPORTED_TP | SUPPORTED_MII | SUPPORTED_AUI |
+ SUPPORTED_FIBRE | SUPPORTED_BNC;
+
+ val = phy_read(phydev, MII_BMSR);
+ if (val < 0)
+ return val;
+
+ if (val & BMSR_ANEGCAPABLE)
+ features |= SUPPORTED_Autoneg;
+ if (val & BMSR_100FULL)
+ features |= SUPPORTED_100baseT_Full;
+ if (val & BMSR_100HALF)
+ features |= SUPPORTED_100baseT_Half;
+ if (val & BMSR_10FULL)
+ features |= SUPPORTED_10baseT_Full;
+ if (val & BMSR_10HALF)
+ features |= SUPPORTED_10baseT_Half;
+
+ if (val & BMSR_ESTATEN) {
+ val = phy_read(phydev, MII_ESTATUS);
+ if (val < 0)
+ return val;
+
+ if (val & ESTATUS_1000_TFULL)
+ features |= SUPPORTED_1000baseT_Full;
+ if (val & ESTATUS_1000_THALF)
+ features |= SUPPORTED_1000baseT_Half;
+ }
+
+ phydev->supported = features;
+ phydev->advertising = features;
+
+ /* enable WOL */
+ at803x_set_wol_mac_addr(phydev);
+ status = phy_write(phydev, AT803X_INTR_ENABLE, AT803X_WOL_ENABLE);
+ status = phy_read(phydev, AT803X_INTR_STATUS);
+
+ return 0;
+}
+
+/* ATHEROS 8035 */
+static struct phy_driver at8035_driver = {
+ .phy_id = 0x004dd072,
+ .name = "Atheros 8035 ethernet",
+ .phy_id_mask = 0xffffffef,
+ .config_init = at803x_config_init,
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_aneg = &genphy_config_aneg,
+ .read_status = &genphy_read_status,
+ .driver = {
+ .owner = THIS_MODULE,
+ },
+};
+
+/* ATHEROS 8030 */
+static struct phy_driver at8030_driver = {
+ .phy_id = 0x004dd076,
+ .name = "Atheros 8030 ethernet",
+ .phy_id_mask = 0xffffffef,
+ .config_init = at803x_config_init,
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_aneg = &genphy_config_aneg,
+ .read_status = &genphy_read_status,
+ .driver = {
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init atheros_init(void)
+{
+ int ret;
+
+ ret = phy_driver_register(&at8035_driver);
+ if (ret)
+ goto err1;
+
+ ret = phy_driver_register(&at8030_driver);
+ if (ret)
+ goto err2;
+
+ return 0;
+
+err2:
+ phy_driver_unregister(&at8035_driver);
+err1:
+ return ret;
+}
+
+static void __exit atheros_exit(void)
+{
+ phy_driver_unregister(&at8035_driver);
+ phy_driver_unregister(&at8030_driver);
+}
+
+module_init(atheros_init);
+module_exit(atheros_exit);
+
+static struct mdio_device_id __maybe_unused atheros_tbl[] = {
+ { 0x004dd076, 0xffffffef },
+ { 0x004dd072, 0xffffffef },
+ { }
+};
+
+MODULE_DEVICE_TABLE(mdio, atheros_tbl);
diff --git a/drivers/net/phy/mdio-gpio.c b/drivers/net/phy/mdio-gpio.c
index 899274f..2ed1140 100644
--- a/drivers/net/phy/mdio-gpio.c
+++ b/drivers/net/phy/mdio-gpio.c
@@ -185,17 +185,20 @@
{
struct mdio_gpio_platform_data *pdata;
struct mii_bus *new_bus;
- int ret;
+ int ret, bus_id;
- if (pdev->dev.of_node)
+ if (pdev->dev.of_node) {
pdata = mdio_gpio_of_get_data(pdev);
- else
+ bus_id = of_alias_get_id(pdev->dev.of_node, "mdio-gpio");
+ } else {
pdata = pdev->dev.platform_data;
+ bus_id = pdev->id;
+ }
if (!pdata)
return -ENODEV;
- new_bus = mdio_gpio_bus_init(&pdev->dev, pdata, pdev->id);
+ new_bus = mdio_gpio_bus_init(&pdev->dev, pdata, bus_id);
if (!new_bus)
return -ENODEV;
diff --git a/drivers/net/team/team_mode_broadcast.c b/drivers/net/team/team_mode_broadcast.c
index 9db0171..c5db428 100644
--- a/drivers/net/team/team_mode_broadcast.c
+++ b/drivers/net/team/team_mode_broadcast.c
@@ -29,8 +29,8 @@
if (last) {
skb2 = skb_clone(skb, GFP_ATOMIC);
if (skb2) {
- ret = team_dev_queue_xmit(team, last,
- skb2);
+ ret = !team_dev_queue_xmit(team, last,
+ skb2);
if (!sum_ret)
sum_ret = ret;
}
@@ -39,7 +39,7 @@
}
}
if (last) {
- ret = team_dev_queue_xmit(team, last, skb);
+ ret = !team_dev_queue_xmit(team, last, skb);
if (!sum_ret)
sum_ret = ret;
}
diff --git a/drivers/net/usb/cdc_eem.c b/drivers/net/usb/cdc_eem.c
index c81e278..08d55b6 100644
--- a/drivers/net/usb/cdc_eem.c
+++ b/drivers/net/usb/cdc_eem.c
@@ -31,6 +31,7 @@
#include <linux/usb/cdc.h>
#include <linux/usb/usbnet.h>
#include <linux/gfp.h>
+#include <linux/if_vlan.h>
/*
@@ -92,7 +93,7 @@
/* no jumbogram (16K) support for now */
- dev->net->hard_header_len += EEM_HEAD + ETH_FCS_LEN;
+ dev->net->hard_header_len += EEM_HEAD + ETH_FCS_LEN + VLAN_HLEN;
dev->hard_mtu = dev->net->mtu + dev->net->hard_header_len;
return 0;
diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c
index a03de71..d012982 100644
--- a/drivers/net/usb/cdc_ether.c
+++ b/drivers/net/usb/cdc_ether.c
@@ -592,6 +592,32 @@
.driver_info = 0,
},
+/* Novatel USB551L and MC551 - handled by qmi_wwan */
+{
+ .match_flags = USB_DEVICE_ID_MATCH_VENDOR
+ | USB_DEVICE_ID_MATCH_PRODUCT
+ | USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = NOVATEL_VENDOR_ID,
+ .idProduct = 0xB001,
+ .bInterfaceClass = USB_CLASS_COMM,
+ .bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET,
+ .bInterfaceProtocol = USB_CDC_PROTO_NONE,
+ .driver_info = 0,
+},
+
+/* Novatel E362 - handled by qmi_wwan */
+{
+ .match_flags = USB_DEVICE_ID_MATCH_VENDOR
+ | USB_DEVICE_ID_MATCH_PRODUCT
+ | USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = NOVATEL_VENDOR_ID,
+ .idProduct = 0x9010,
+ .bInterfaceClass = USB_CLASS_COMM,
+ .bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET,
+ .bInterfaceProtocol = USB_CDC_PROTO_NONE,
+ .driver_info = 0,
+},
+
/*
* WHITELIST!!!
*
@@ -604,21 +630,6 @@
* because of bugs/quirks in a given product (like Zaurus, above).
*/
{
- /* Novatel USB551L */
- /* This match must come *before* the generic CDC-ETHER match so that
- * we get FLAG_WWAN set on the device, since it's descriptors are
- * generic CDC-ETHER.
- */
- .match_flags = USB_DEVICE_ID_MATCH_VENDOR
- | USB_DEVICE_ID_MATCH_PRODUCT
- | USB_DEVICE_ID_MATCH_INT_INFO,
- .idVendor = NOVATEL_VENDOR_ID,
- .idProduct = 0xB001,
- .bInterfaceClass = USB_CLASS_COMM,
- .bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET,
- .bInterfaceProtocol = USB_CDC_PROTO_NONE,
- .driver_info = (unsigned long)&wwan_info,
-}, {
/* ZTE (Vodafone) K3805-Z */
.match_flags = USB_DEVICE_ID_MATCH_VENDOR
| USB_DEVICE_ID_MATCH_PRODUCT
diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c
index 4cd582a..74fab1a 100644
--- a/drivers/net/usb/cdc_ncm.c
+++ b/drivers/net/usb/cdc_ncm.c
@@ -540,10 +540,12 @@
(ctx->ether_desc == NULL) || (ctx->control != intf))
goto error;
- /* claim interfaces, if any */
- temp = usb_driver_claim_interface(driver, ctx->data, dev);
- if (temp)
- goto error;
+ /* claim data interface, if different from control */
+ if (ctx->data != ctx->control) {
+ temp = usb_driver_claim_interface(driver, ctx->data, dev);
+ if (temp)
+ goto error;
+ }
iface_no = ctx->data->cur_altsetting->desc.bInterfaceNumber;
@@ -623,6 +625,10 @@
tasklet_kill(&ctx->bh);
+ /* handle devices with combined control and data interface */
+ if (ctx->control == ctx->data)
+ ctx->data = NULL;
+
/* disconnect master --> disconnect slave */
if (intf == ctx->control && ctx->data) {
usb_set_intfdata(ctx->data, NULL);
@@ -1245,6 +1251,14 @@
.driver_info = (unsigned long) &wwan_info,
},
+ /* Huawei NCM devices disguised as vendor specific */
+ { USB_VENDOR_AND_INTERFACE_INFO(0x12d1, 0xff, 0x02, 0x16),
+ .driver_info = (unsigned long)&wwan_info,
+ },
+ { USB_VENDOR_AND_INTERFACE_INFO(0x12d1, 0xff, 0x02, 0x46),
+ .driver_info = (unsigned long)&wwan_info,
+ },
+
/* Generic CDC-NCM devices */
{ USB_INTERFACE_INFO(USB_CLASS_COMM,
USB_CDC_SUBCLASS_NCM, USB_CDC_PROTO_NONE),
diff --git a/drivers/net/usb/ipheth.c b/drivers/net/usb/ipheth.c
index a28a983d..534d8be 100644
--- a/drivers/net/usb/ipheth.c
+++ b/drivers/net/usb/ipheth.c
@@ -62,6 +62,7 @@
#define USB_PRODUCT_IPAD 0x129a
#define USB_PRODUCT_IPHONE_4_VZW 0x129c
#define USB_PRODUCT_IPHONE_4S 0x12a0
+#define USB_PRODUCT_IPHONE_5 0x12a8
#define IPHETH_USBINTF_CLASS 255
#define IPHETH_USBINTF_SUBCLASS 253
@@ -113,6 +114,10 @@
USB_VENDOR_APPLE, USB_PRODUCT_IPHONE_4S,
IPHETH_USBINTF_CLASS, IPHETH_USBINTF_SUBCLASS,
IPHETH_USBINTF_PROTO) },
+ { USB_DEVICE_AND_INTERFACE_INFO(
+ USB_VENDOR_APPLE, USB_PRODUCT_IPHONE_5,
+ IPHETH_USBINTF_CLASS, IPHETH_USBINTF_SUBCLASS,
+ IPHETH_USBINTF_PROTO) },
{ }
};
MODULE_DEVICE_TABLE(usb, ipheth_table);
diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c
index 6883c37..3b566fa 100644
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -369,18 +369,73 @@
USB_VENDOR_AND_INTERFACE_INFO(0x106c, USB_CLASS_VENDOR_SPEC, 0xf1, 0xff),
.driver_info = (unsigned long)&qmi_wwan_info,
},
+ { /* Novatel USB551L and MC551 */
+ USB_DEVICE_AND_INTERFACE_INFO(0x1410, 0xb001,
+ USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_ETHERNET,
+ USB_CDC_PROTO_NONE),
+ .driver_info = (unsigned long)&qmi_wwan_info,
+ },
+ { /* Novatel E362 */
+ USB_DEVICE_AND_INTERFACE_INFO(0x1410, 0x9010,
+ USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_ETHERNET,
+ USB_CDC_PROTO_NONE),
+ .driver_info = (unsigned long)&qmi_wwan_info,
+ },
/* 3. Combined interface devices matching on interface number */
+ {QMI_FIXED_INTF(0x19d2, 0x0002, 1)},
+ {QMI_FIXED_INTF(0x19d2, 0x0012, 1)},
+ {QMI_FIXED_INTF(0x19d2, 0x0017, 3)},
+ {QMI_FIXED_INTF(0x19d2, 0x0021, 4)},
+ {QMI_FIXED_INTF(0x19d2, 0x0025, 1)},
+ {QMI_FIXED_INTF(0x19d2, 0x0031, 4)},
+ {QMI_FIXED_INTF(0x19d2, 0x0042, 4)},
+ {QMI_FIXED_INTF(0x19d2, 0x0049, 5)},
+ {QMI_FIXED_INTF(0x19d2, 0x0052, 4)},
{QMI_FIXED_INTF(0x19d2, 0x0055, 1)}, /* ZTE (Vodafone) K3520-Z */
+ {QMI_FIXED_INTF(0x19d2, 0x0058, 4)},
{QMI_FIXED_INTF(0x19d2, 0x0063, 4)}, /* ZTE (Vodafone) K3565-Z */
{QMI_FIXED_INTF(0x19d2, 0x0104, 4)}, /* ZTE (Vodafone) K4505-Z */
+ {QMI_FIXED_INTF(0x19d2, 0x0113, 5)},
+ {QMI_FIXED_INTF(0x19d2, 0x0118, 5)},
+ {QMI_FIXED_INTF(0x19d2, 0x0121, 5)},
+ {QMI_FIXED_INTF(0x19d2, 0x0123, 4)},
+ {QMI_FIXED_INTF(0x19d2, 0x0124, 5)},
+ {QMI_FIXED_INTF(0x19d2, 0x0125, 6)},
+ {QMI_FIXED_INTF(0x19d2, 0x0126, 5)},
+ {QMI_FIXED_INTF(0x19d2, 0x0130, 1)},
+ {QMI_FIXED_INTF(0x19d2, 0x0133, 3)},
+ {QMI_FIXED_INTF(0x19d2, 0x0141, 5)},
{QMI_FIXED_INTF(0x19d2, 0x0157, 5)}, /* ZTE MF683 */
+ {QMI_FIXED_INTF(0x19d2, 0x0158, 3)},
{QMI_FIXED_INTF(0x19d2, 0x0167, 4)}, /* ZTE MF820D */
+ {QMI_FIXED_INTF(0x19d2, 0x0168, 4)},
+ {QMI_FIXED_INTF(0x19d2, 0x0176, 3)},
+ {QMI_FIXED_INTF(0x19d2, 0x0178, 3)},
+ {QMI_FIXED_INTF(0x19d2, 0x0191, 4)}, /* ZTE EuFi890 */
+ {QMI_FIXED_INTF(0x19d2, 0x0199, 1)}, /* ZTE MF820S */
+ {QMI_FIXED_INTF(0x19d2, 0x0200, 1)},
+ {QMI_FIXED_INTF(0x19d2, 0x0257, 3)}, /* ZTE MF821 */
{QMI_FIXED_INTF(0x19d2, 0x0326, 4)}, /* ZTE MF821D */
{QMI_FIXED_INTF(0x19d2, 0x1008, 4)}, /* ZTE (Vodafone) K3570-Z */
{QMI_FIXED_INTF(0x19d2, 0x1010, 4)}, /* ZTE (Vodafone) K3571-Z */
+ {QMI_FIXED_INTF(0x19d2, 0x1012, 4)},
{QMI_FIXED_INTF(0x19d2, 0x1018, 3)}, /* ZTE (Vodafone) K5006-Z */
+ {QMI_FIXED_INTF(0x19d2, 0x1021, 2)},
+ {QMI_FIXED_INTF(0x19d2, 0x1245, 4)},
+ {QMI_FIXED_INTF(0x19d2, 0x1247, 4)},
+ {QMI_FIXED_INTF(0x19d2, 0x1252, 4)},
+ {QMI_FIXED_INTF(0x19d2, 0x1254, 4)},
+ {QMI_FIXED_INTF(0x19d2, 0x1255, 3)},
+ {QMI_FIXED_INTF(0x19d2, 0x1255, 4)},
+ {QMI_FIXED_INTF(0x19d2, 0x1256, 4)},
+ {QMI_FIXED_INTF(0x19d2, 0x1401, 2)},
{QMI_FIXED_INTF(0x19d2, 0x1402, 2)}, /* ZTE MF60 */
+ {QMI_FIXED_INTF(0x19d2, 0x1424, 2)},
+ {QMI_FIXED_INTF(0x19d2, 0x1425, 2)},
+ {QMI_FIXED_INTF(0x19d2, 0x1426, 2)}, /* ZTE MF91 */
{QMI_FIXED_INTF(0x19d2, 0x2002, 4)}, /* ZTE (Vodafone) K3765-Z */
{QMI_FIXED_INTF(0x0f3d, 0x68a2, 8)}, /* Sierra Wireless MC7700 */
{QMI_FIXED_INTF(0x114f, 0x68a2, 8)}, /* Sierra Wireless MC7750 */
diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c
index 7479a57..362cb8c 100644
--- a/drivers/net/usb/smsc95xx.c
+++ b/drivers/net/usb/smsc95xx.c
@@ -184,7 +184,7 @@
/* set the address, index & direction (read from PHY) */
phy_id &= dev->mii.phy_id_mask;
idx &= dev->mii.reg_num_mask;
- addr = (phy_id << 11) | (idx << 6) | MII_READ_;
+ addr = (phy_id << 11) | (idx << 6) | MII_READ_ | MII_BUSY_;
ret = smsc95xx_write_reg(dev, MII_ADDR, addr);
check_warn_goto_done(ret, "Error writing MII_ADDR");
@@ -221,7 +221,7 @@
/* set the address, index & direction (write to PHY) */
phy_id &= dev->mii.phy_id_mask;
idx &= dev->mii.reg_num_mask;
- addr = (phy_id << 11) | (idx << 6) | MII_WRITE_;
+ addr = (phy_id << 11) | (idx << 6) | MII_WRITE_ | MII_BUSY_;
ret = smsc95xx_write_reg(dev, MII_ADDR, addr);
check_warn_goto_done(ret, "Error writing MII_ADDR");
@@ -1344,6 +1344,7 @@
} else {
u32 csum_preamble = smsc95xx_calc_csum_preamble(skb);
skb_push(skb, 4);
+ cpu_to_le32s(&csum_preamble);
memcpy(skb->data, &csum_preamble, 4);
}
}
diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
index f9819d1..edb81ed 100644
--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -359,10 +359,12 @@
void usbnet_defer_kevent (struct usbnet *dev, int work)
{
set_bit (work, &dev->flags);
- if (!schedule_work (&dev->kevent))
- netdev_err(dev->net, "kevent %d may have been dropped\n", work);
- else
+ if (!schedule_work (&dev->kevent)) {
+ if (net_ratelimit())
+ netdev_err(dev->net, "kevent %d may have been dropped\n", work);
+ } else {
netdev_dbg(dev->net, "kevent %d scheduled\n", work);
+ }
}
EXPORT_SYMBOL_GPL(usbnet_defer_kevent);
@@ -1158,6 +1160,7 @@
usb_anchor_urb(urb, &dev->deferred);
/* no use to process more packets */
netif_stop_queue(net);
+ usb_put_urb(urb);
spin_unlock_irqrestore(&dev->txq.lock, flags);
netdev_dbg(dev->net, "Delaying transmission for resumption\n");
goto deferred;
@@ -1310,6 +1313,8 @@
cancel_work_sync(&dev->kevent);
+ usb_scuttle_anchored_urbs(&dev->deferred);
+
if (dev->driver_info->unbind)
dev->driver_info->unbind (dev, intf);
diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c
index ce9d4f2..0ae1bcc 100644
--- a/drivers/net/vmxnet3/vmxnet3_drv.c
+++ b/drivers/net/vmxnet3/vmxnet3_drv.c
@@ -744,28 +744,43 @@
for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
const struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[i];
+ u32 buf_size;
- tbi = tq->buf_info + tq->tx_ring.next2fill;
- tbi->map_type = VMXNET3_MAP_PAGE;
- tbi->dma_addr = skb_frag_dma_map(&adapter->pdev->dev, frag,
- 0, skb_frag_size(frag),
- DMA_TO_DEVICE);
+ buf_offset = 0;
+ len = skb_frag_size(frag);
+ while (len) {
+ tbi = tq->buf_info + tq->tx_ring.next2fill;
+ if (len < VMXNET3_MAX_TX_BUF_SIZE) {
+ buf_size = len;
+ dw2 |= len;
+ } else {
+ buf_size = VMXNET3_MAX_TX_BUF_SIZE;
+ /* spec says that for TxDesc.len, 0 == 2^14 */
+ }
+ tbi->map_type = VMXNET3_MAP_PAGE;
+ tbi->dma_addr = skb_frag_dma_map(&adapter->pdev->dev, frag,
+ buf_offset, buf_size,
+ DMA_TO_DEVICE);
- tbi->len = skb_frag_size(frag);
+ tbi->len = buf_size;
- gdesc = tq->tx_ring.base + tq->tx_ring.next2fill;
- BUG_ON(gdesc->txd.gen == tq->tx_ring.gen);
+ gdesc = tq->tx_ring.base + tq->tx_ring.next2fill;
+ BUG_ON(gdesc->txd.gen == tq->tx_ring.gen);
- gdesc->txd.addr = cpu_to_le64(tbi->dma_addr);
- gdesc->dword[2] = cpu_to_le32(dw2 | skb_frag_size(frag));
- gdesc->dword[3] = 0;
+ gdesc->txd.addr = cpu_to_le64(tbi->dma_addr);
+ gdesc->dword[2] = cpu_to_le32(dw2);
+ gdesc->dword[3] = 0;
- dev_dbg(&adapter->netdev->dev,
- "txd[%u]: 0x%llu %u %u\n",
- tq->tx_ring.next2fill, le64_to_cpu(gdesc->txd.addr),
- le32_to_cpu(gdesc->dword[2]), gdesc->dword[3]);
- vmxnet3_cmd_ring_adv_next2fill(&tq->tx_ring);
- dw2 = tq->tx_ring.gen << VMXNET3_TXD_GEN_SHIFT;
+ dev_dbg(&adapter->netdev->dev,
+ "txd[%u]: 0x%llu %u %u\n",
+ tq->tx_ring.next2fill, le64_to_cpu(gdesc->txd.addr),
+ le32_to_cpu(gdesc->dword[2]), gdesc->dword[3]);
+ vmxnet3_cmd_ring_adv_next2fill(&tq->tx_ring);
+ dw2 = tq->tx_ring.gen << VMXNET3_TXD_GEN_SHIFT;
+
+ len -= buf_size;
+ buf_offset += buf_size;
+ }
}
ctx->eop_txd = gdesc;
@@ -886,6 +901,18 @@
}
}
+static int txd_estimate(const struct sk_buff *skb)
+{
+ int count = VMXNET3_TXD_NEEDED(skb_headlen(skb)) + 1;
+ int i;
+
+ for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
+ const struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[i];
+
+ count += VMXNET3_TXD_NEEDED(skb_frag_size(frag));
+ }
+ return count;
+}
/*
* Transmits a pkt thru a given tq
@@ -914,9 +941,7 @@
union Vmxnet3_GenericDesc tempTxDesc;
#endif
- /* conservatively estimate # of descriptors to use */
- count = VMXNET3_TXD_NEEDED(skb_headlen(skb)) +
- skb_shinfo(skb)->nr_frags + 1;
+ count = txd_estimate(skb);
ctx.ipv4 = (vlan_get_protocol(skb) == cpu_to_be16(ETH_P_IP));
diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c
index 607976c..8b5c619 100644
--- a/drivers/net/vxlan.c
+++ b/drivers/net/vxlan.c
@@ -1,5 +1,5 @@
/*
- * VXLAN: Virtual eXtensiable Local Area Network
+ * VXLAN: Virtual eXtensible Local Area Network
*
* Copyright (c) 2012 Vyatta Inc.
*
@@ -50,8 +50,8 @@
#define VXLAN_N_VID (1u << 24)
#define VXLAN_VID_MASK (VXLAN_N_VID - 1)
-/* VLAN + IP header + UDP + VXLAN */
-#define VXLAN_HEADROOM (4 + 20 + 8 + 8)
+/* IP header + UDP + VXLAN + Ethernet header */
+#define VXLAN_HEADROOM (20 + 8 + 8 + 14)
#define VXLAN_FLAGS 0x08000000 /* struct vxlanhdr.vx_flags required value. */
@@ -816,7 +816,7 @@
= container_of(p, struct vxlan_fdb, hlist);
unsigned long timeout;
- if (f->state == NUD_PERMANENT)
+ if (f->state & NUD_PERMANENT)
continue;
timeout = f->used + vxlan->age_interval * HZ;
@@ -1102,6 +1102,10 @@
if (!tb[IFLA_MTU])
dev->mtu = lowerdev->mtu - VXLAN_HEADROOM;
+
+ /* update header length based on lower device */
+ dev->hard_header_len = lowerdev->hard_header_len +
+ VXLAN_HEADROOM;
}
if (data[IFLA_VXLAN_TOS])
diff --git a/drivers/net/wan/ixp4xx_hss.c b/drivers/net/wan/ixp4xx_hss.c
index 3f575afd..e9a3da5 100644
--- a/drivers/net/wan/ixp4xx_hss.c
+++ b/drivers/net/wan/ixp4xx_hss.c
@@ -969,10 +969,12 @@
{
int i;
- if (!ports_open)
- if (!(dma_pool = dma_pool_create(DRV_NAME, NULL,
- POOL_ALLOC_SIZE, 32, 0)))
+ if (!ports_open) {
+ dma_pool = dma_pool_create(DRV_NAME, &port->netdev->dev,
+ POOL_ALLOC_SIZE, 32, 0);
+ if (!dma_pool)
return -ENOMEM;
+ }
if (!(port->desc_tab = dma_pool_alloc(dma_pool, GFP_KERNEL,
&port->desc_tab_phys)))
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h b/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h
index 89bf94d..6f7cf49 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h
+++ b/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h
@@ -534,107 +534,107 @@
static const u32 ar9300Modes_high_power_tx_gain_table_2p2[][5] = {
/* Addr 5G_HT20 5G_HT40 2G_HT40 2G_HT20 */
- {0x0000a2dc, 0x000cfff0, 0x000cfff0, 0x03aaa352, 0x03aaa352},
- {0x0000a2e0, 0x000f0000, 0x000f0000, 0x03ccc584, 0x03ccc584},
- {0x0000a2e4, 0x03f00000, 0x03f00000, 0x03f0f800, 0x03f0f800},
+ {0x0000a2dc, 0x00033800, 0x00033800, 0x03aaa352, 0x03aaa352},
+ {0x0000a2e0, 0x0003c000, 0x0003c000, 0x03ccc584, 0x03ccc584},
+ {0x0000a2e4, 0x03fc0000, 0x03fc0000, 0x03f0f800, 0x03f0f800},
{0x0000a2e8, 0x00000000, 0x00000000, 0x03ff0000, 0x03ff0000},
{0x0000a410, 0x000050d9, 0x000050d9, 0x000050d9, 0x000050d9},
{0x0000a500, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
{0x0000a504, 0x06000003, 0x06000003, 0x04000002, 0x04000002},
{0x0000a508, 0x0a000020, 0x0a000020, 0x08000004, 0x08000004},
{0x0000a50c, 0x10000023, 0x10000023, 0x0b000200, 0x0b000200},
- {0x0000a510, 0x15000028, 0x15000028, 0x0f000202, 0x0f000202},
- {0x0000a514, 0x1b00002b, 0x1b00002b, 0x12000400, 0x12000400},
- {0x0000a518, 0x1f020028, 0x1f020028, 0x16000402, 0x16000402},
- {0x0000a51c, 0x2502002b, 0x2502002b, 0x19000404, 0x19000404},
- {0x0000a520, 0x2a04002a, 0x2a04002a, 0x1c000603, 0x1c000603},
- {0x0000a524, 0x2e06002a, 0x2e06002a, 0x21000a02, 0x21000a02},
- {0x0000a528, 0x3302202d, 0x3302202d, 0x25000a04, 0x25000a04},
- {0x0000a52c, 0x3804202c, 0x3804202c, 0x28000a20, 0x28000a20},
- {0x0000a530, 0x3c06202c, 0x3c06202c, 0x2c000e20, 0x2c000e20},
- {0x0000a534, 0x4108202d, 0x4108202d, 0x30000e22, 0x30000e22},
- {0x0000a538, 0x4506402d, 0x4506402d, 0x34000e24, 0x34000e24},
- {0x0000a53c, 0x4906222d, 0x4906222d, 0x38001640, 0x38001640},
- {0x0000a540, 0x4d062231, 0x4d062231, 0x3c001660, 0x3c001660},
- {0x0000a544, 0x50082231, 0x50082231, 0x3f001861, 0x3f001861},
- {0x0000a548, 0x5608422e, 0x5608422e, 0x43001a81, 0x43001a81},
- {0x0000a54c, 0x5a08442e, 0x5a08442e, 0x47001a83, 0x47001a83},
- {0x0000a550, 0x5e0a4431, 0x5e0a4431, 0x4a001c84, 0x4a001c84},
- {0x0000a554, 0x640a4432, 0x640a4432, 0x4e001ce3, 0x4e001ce3},
- {0x0000a558, 0x680a4434, 0x680a4434, 0x52001ce5, 0x52001ce5},
- {0x0000a55c, 0x6c0a6434, 0x6c0a6434, 0x56001ce9, 0x56001ce9},
- {0x0000a560, 0x6f0a6633, 0x6f0a6633, 0x5a001ceb, 0x5a001ceb},
- {0x0000a564, 0x730c6634, 0x730c6634, 0x5d001eec, 0x5d001eec},
- {0x0000a568, 0x730c6634, 0x730c6634, 0x5d001eec, 0x5d001eec},
- {0x0000a56c, 0x730c6634, 0x730c6634, 0x5d001eec, 0x5d001eec},
- {0x0000a570, 0x730c6634, 0x730c6634, 0x5d001eec, 0x5d001eec},
- {0x0000a574, 0x730c6634, 0x730c6634, 0x5d001eec, 0x5d001eec},
- {0x0000a578, 0x730c6634, 0x730c6634, 0x5d001eec, 0x5d001eec},
- {0x0000a57c, 0x730c6634, 0x730c6634, 0x5d001eec, 0x5d001eec},
+ {0x0000a510, 0x16000220, 0x16000220, 0x0f000202, 0x0f000202},
+ {0x0000a514, 0x1c000223, 0x1c000223, 0x12000400, 0x12000400},
+ {0x0000a518, 0x21002220, 0x21002220, 0x16000402, 0x16000402},
+ {0x0000a51c, 0x27002223, 0x27002223, 0x19000404, 0x19000404},
+ {0x0000a520, 0x2b022220, 0x2b022220, 0x1c000603, 0x1c000603},
+ {0x0000a524, 0x2f022222, 0x2f022222, 0x21000a02, 0x21000a02},
+ {0x0000a528, 0x34022225, 0x34022225, 0x25000a04, 0x25000a04},
+ {0x0000a52c, 0x3a02222a, 0x3a02222a, 0x28000a20, 0x28000a20},
+ {0x0000a530, 0x3e02222c, 0x3e02222c, 0x2c000e20, 0x2c000e20},
+ {0x0000a534, 0x4202242a, 0x4202242a, 0x30000e22, 0x30000e22},
+ {0x0000a538, 0x4702244a, 0x4702244a, 0x34000e24, 0x34000e24},
+ {0x0000a53c, 0x4b02244c, 0x4b02244c, 0x38001640, 0x38001640},
+ {0x0000a540, 0x4e02246c, 0x4e02246c, 0x3c001660, 0x3c001660},
+ {0x0000a544, 0x52022470, 0x52022470, 0x3f001861, 0x3f001861},
+ {0x0000a548, 0x55022490, 0x55022490, 0x43001a81, 0x43001a81},
+ {0x0000a54c, 0x59022492, 0x59022492, 0x47001a83, 0x47001a83},
+ {0x0000a550, 0x5d022692, 0x5d022692, 0x4a001c84, 0x4a001c84},
+ {0x0000a554, 0x61022892, 0x61022892, 0x4e001ce3, 0x4e001ce3},
+ {0x0000a558, 0x65024890, 0x65024890, 0x52001ce5, 0x52001ce5},
+ {0x0000a55c, 0x69024892, 0x69024892, 0x56001ce9, 0x56001ce9},
+ {0x0000a560, 0x6e024c92, 0x6e024c92, 0x5a001ceb, 0x5a001ceb},
+ {0x0000a564, 0x74026e92, 0x74026e92, 0x5d001eec, 0x5d001eec},
+ {0x0000a568, 0x74026e92, 0x74026e92, 0x5d001eec, 0x5d001eec},
+ {0x0000a56c, 0x74026e92, 0x74026e92, 0x5d001eec, 0x5d001eec},
+ {0x0000a570, 0x74026e92, 0x74026e92, 0x5d001eec, 0x5d001eec},
+ {0x0000a574, 0x74026e92, 0x74026e92, 0x5d001eec, 0x5d001eec},
+ {0x0000a578, 0x74026e92, 0x74026e92, 0x5d001eec, 0x5d001eec},
+ {0x0000a57c, 0x74026e92, 0x74026e92, 0x5d001eec, 0x5d001eec},
{0x0000a580, 0x00800000, 0x00800000, 0x00800000, 0x00800000},
{0x0000a584, 0x06800003, 0x06800003, 0x04800002, 0x04800002},
{0x0000a588, 0x0a800020, 0x0a800020, 0x08800004, 0x08800004},
{0x0000a58c, 0x10800023, 0x10800023, 0x0b800200, 0x0b800200},
- {0x0000a590, 0x15800028, 0x15800028, 0x0f800202, 0x0f800202},
- {0x0000a594, 0x1b80002b, 0x1b80002b, 0x12800400, 0x12800400},
- {0x0000a598, 0x1f820028, 0x1f820028, 0x16800402, 0x16800402},
- {0x0000a59c, 0x2582002b, 0x2582002b, 0x19800404, 0x19800404},
- {0x0000a5a0, 0x2a84002a, 0x2a84002a, 0x1c800603, 0x1c800603},
- {0x0000a5a4, 0x2e86002a, 0x2e86002a, 0x21800a02, 0x21800a02},
- {0x0000a5a8, 0x3382202d, 0x3382202d, 0x25800a04, 0x25800a04},
- {0x0000a5ac, 0x3884202c, 0x3884202c, 0x28800a20, 0x28800a20},
- {0x0000a5b0, 0x3c86202c, 0x3c86202c, 0x2c800e20, 0x2c800e20},
- {0x0000a5b4, 0x4188202d, 0x4188202d, 0x30800e22, 0x30800e22},
- {0x0000a5b8, 0x4586402d, 0x4586402d, 0x34800e24, 0x34800e24},
- {0x0000a5bc, 0x4986222d, 0x4986222d, 0x38801640, 0x38801640},
- {0x0000a5c0, 0x4d862231, 0x4d862231, 0x3c801660, 0x3c801660},
- {0x0000a5c4, 0x50882231, 0x50882231, 0x3f801861, 0x3f801861},
- {0x0000a5c8, 0x5688422e, 0x5688422e, 0x43801a81, 0x43801a81},
- {0x0000a5cc, 0x5a88442e, 0x5a88442e, 0x47801a83, 0x47801a83},
- {0x0000a5d0, 0x5e8a4431, 0x5e8a4431, 0x4a801c84, 0x4a801c84},
- {0x0000a5d4, 0x648a4432, 0x648a4432, 0x4e801ce3, 0x4e801ce3},
- {0x0000a5d8, 0x688a4434, 0x688a4434, 0x52801ce5, 0x52801ce5},
- {0x0000a5dc, 0x6c8a6434, 0x6c8a6434, 0x56801ce9, 0x56801ce9},
- {0x0000a5e0, 0x6f8a6633, 0x6f8a6633, 0x5a801ceb, 0x5a801ceb},
- {0x0000a5e4, 0x738c6634, 0x738c6634, 0x5d801eec, 0x5d801eec},
- {0x0000a5e8, 0x738c6634, 0x738c6634, 0x5d801eec, 0x5d801eec},
- {0x0000a5ec, 0x738c6634, 0x738c6634, 0x5d801eec, 0x5d801eec},
- {0x0000a5f0, 0x738c6634, 0x738c6634, 0x5d801eec, 0x5d801eec},
- {0x0000a5f4, 0x738c6634, 0x738c6634, 0x5d801eec, 0x5d801eec},
- {0x0000a5f8, 0x738c6634, 0x738c6634, 0x5d801eec, 0x5d801eec},
- {0x0000a5fc, 0x738c6634, 0x738c6634, 0x5d801eec, 0x5d801eec},
+ {0x0000a590, 0x16800220, 0x16800220, 0x0f800202, 0x0f800202},
+ {0x0000a594, 0x1c800223, 0x1c800223, 0x12800400, 0x12800400},
+ {0x0000a598, 0x21802220, 0x21802220, 0x16800402, 0x16800402},
+ {0x0000a59c, 0x27802223, 0x27802223, 0x19800404, 0x19800404},
+ {0x0000a5a0, 0x2b822220, 0x2b822220, 0x1c800603, 0x1c800603},
+ {0x0000a5a4, 0x2f822222, 0x2f822222, 0x21800a02, 0x21800a02},
+ {0x0000a5a8, 0x34822225, 0x34822225, 0x25800a04, 0x25800a04},
+ {0x0000a5ac, 0x3a82222a, 0x3a82222a, 0x28800a20, 0x28800a20},
+ {0x0000a5b0, 0x3e82222c, 0x3e82222c, 0x2c800e20, 0x2c800e20},
+ {0x0000a5b4, 0x4282242a, 0x4282242a, 0x30800e22, 0x30800e22},
+ {0x0000a5b8, 0x4782244a, 0x4782244a, 0x34800e24, 0x34800e24},
+ {0x0000a5bc, 0x4b82244c, 0x4b82244c, 0x38801640, 0x38801640},
+ {0x0000a5c0, 0x4e82246c, 0x4e82246c, 0x3c801660, 0x3c801660},
+ {0x0000a5c4, 0x52822470, 0x52822470, 0x3f801861, 0x3f801861},
+ {0x0000a5c8, 0x55822490, 0x55822490, 0x43801a81, 0x43801a81},
+ {0x0000a5cc, 0x59822492, 0x59822492, 0x47801a83, 0x47801a83},
+ {0x0000a5d0, 0x5d822692, 0x5d822692, 0x4a801c84, 0x4a801c84},
+ {0x0000a5d4, 0x61822892, 0x61822892, 0x4e801ce3, 0x4e801ce3},
+ {0x0000a5d8, 0x65824890, 0x65824890, 0x52801ce5, 0x52801ce5},
+ {0x0000a5dc, 0x69824892, 0x69824892, 0x56801ce9, 0x56801ce9},
+ {0x0000a5e0, 0x6e824c92, 0x6e824c92, 0x5a801ceb, 0x5a801ceb},
+ {0x0000a5e4, 0x74826e92, 0x74826e92, 0x5d801eec, 0x5d801eec},
+ {0x0000a5e8, 0x74826e92, 0x74826e92, 0x5d801eec, 0x5d801eec},
+ {0x0000a5ec, 0x74826e92, 0x74826e92, 0x5d801eec, 0x5d801eec},
+ {0x0000a5f0, 0x74826e92, 0x74826e92, 0x5d801eec, 0x5d801eec},
+ {0x0000a5f4, 0x74826e92, 0x74826e92, 0x5d801eec, 0x5d801eec},
+ {0x0000a5f8, 0x74826e92, 0x74826e92, 0x5d801eec, 0x5d801eec},
+ {0x0000a5fc, 0x74826e92, 0x74826e92, 0x5d801eec, 0x5d801eec},
{0x0000a600, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
{0x0000a604, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
- {0x0000a608, 0x01804601, 0x01804601, 0x00000000, 0x00000000},
- {0x0000a60c, 0x01804601, 0x01804601, 0x00000000, 0x00000000},
- {0x0000a610, 0x01804601, 0x01804601, 0x00000000, 0x00000000},
- {0x0000a614, 0x01804601, 0x01804601, 0x01404000, 0x01404000},
- {0x0000a618, 0x01804601, 0x01804601, 0x01404501, 0x01404501},
- {0x0000a61c, 0x01804601, 0x01804601, 0x02008501, 0x02008501},
- {0x0000a620, 0x03408d02, 0x03408d02, 0x0280ca03, 0x0280ca03},
- {0x0000a624, 0x0300cc03, 0x0300cc03, 0x03010c04, 0x03010c04},
- {0x0000a628, 0x03410d04, 0x03410d04, 0x04014c04, 0x04014c04},
- {0x0000a62c, 0x03410d04, 0x03410d04, 0x04015005, 0x04015005},
- {0x0000a630, 0x03410d04, 0x03410d04, 0x04015005, 0x04015005},
- {0x0000a634, 0x03410d04, 0x03410d04, 0x04015005, 0x04015005},
- {0x0000a638, 0x03410d04, 0x03410d04, 0x04015005, 0x04015005},
- {0x0000a63c, 0x03410d04, 0x03410d04, 0x04015005, 0x04015005},
- {0x0000b2dc, 0x000cfff0, 0x000cfff0, 0x03aaa352, 0x03aaa352},
- {0x0000b2e0, 0x000f0000, 0x000f0000, 0x03ccc584, 0x03ccc584},
- {0x0000b2e4, 0x03f00000, 0x03f00000, 0x03f0f800, 0x03f0f800},
+ {0x0000a608, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
+ {0x0000a60c, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
+ {0x0000a610, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
+ {0x0000a614, 0x02004000, 0x02004000, 0x01404000, 0x01404000},
+ {0x0000a618, 0x02004801, 0x02004801, 0x01404501, 0x01404501},
+ {0x0000a61c, 0x02808a02, 0x02808a02, 0x02008501, 0x02008501},
+ {0x0000a620, 0x0380ce03, 0x0380ce03, 0x0280ca03, 0x0280ca03},
+ {0x0000a624, 0x04411104, 0x04411104, 0x03010c04, 0x03010c04},
+ {0x0000a628, 0x04411104, 0x04411104, 0x04014c04, 0x04014c04},
+ {0x0000a62c, 0x04411104, 0x04411104, 0x04015005, 0x04015005},
+ {0x0000a630, 0x04411104, 0x04411104, 0x04015005, 0x04015005},
+ {0x0000a634, 0x04411104, 0x04411104, 0x04015005, 0x04015005},
+ {0x0000a638, 0x04411104, 0x04411104, 0x04015005, 0x04015005},
+ {0x0000a63c, 0x04411104, 0x04411104, 0x04015005, 0x04015005},
+ {0x0000b2dc, 0x00033800, 0x00033800, 0x03aaa352, 0x03aaa352},
+ {0x0000b2e0, 0x0003c000, 0x0003c000, 0x03ccc584, 0x03ccc584},
+ {0x0000b2e4, 0x03fc0000, 0x03fc0000, 0x03f0f800, 0x03f0f800},
{0x0000b2e8, 0x00000000, 0x00000000, 0x03ff0000, 0x03ff0000},
- {0x0000c2dc, 0x000cfff0, 0x000cfff0, 0x03aaa352, 0x03aaa352},
- {0x0000c2e0, 0x000f0000, 0x000f0000, 0x03ccc584, 0x03ccc584},
- {0x0000c2e4, 0x03f00000, 0x03f00000, 0x03f0f800, 0x03f0f800},
+ {0x0000c2dc, 0x00033800, 0x00033800, 0x03aaa352, 0x03aaa352},
+ {0x0000c2e0, 0x0003c000, 0x0003c000, 0x03ccc584, 0x03ccc584},
+ {0x0000c2e4, 0x03fc0000, 0x03fc0000, 0x03f0f800, 0x03f0f800},
{0x0000c2e8, 0x00000000, 0x00000000, 0x03ff0000, 0x03ff0000},
{0x00016044, 0x012492d4, 0x012492d4, 0x012492d4, 0x012492d4},
- {0x00016048, 0x61200001, 0x61200001, 0x66480001, 0x66480001},
+ {0x00016048, 0x66480001, 0x66480001, 0x66480001, 0x66480001},
{0x00016068, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c},
{0x00016444, 0x012492d4, 0x012492d4, 0x012492d4, 0x012492d4},
- {0x00016448, 0x61200001, 0x61200001, 0x66480001, 0x66480001},
+ {0x00016448, 0x66480001, 0x66480001, 0x66480001, 0x66480001},
{0x00016468, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c},
{0x00016844, 0x012492d4, 0x012492d4, 0x012492d4, 0x012492d4},
- {0x00016848, 0x61200001, 0x61200001, 0x66480001, 0x66480001},
+ {0x00016848, 0x66480001, 0x66480001, 0x66480001, 0x66480001},
{0x00016868, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c},
};
diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c
index 924c461..f5dda84 100644
--- a/drivers/net/wireless/ath/ath9k/hif_usb.c
+++ b/drivers/net/wireless/ath/ath9k/hif_usb.c
@@ -38,6 +38,7 @@
{ USB_DEVICE(0x04CA, 0x4605) }, /* Liteon */
{ USB_DEVICE(0x040D, 0x3801) }, /* VIA */
{ USB_DEVICE(0x0cf3, 0xb003) }, /* Ubiquiti WifiStation Ext */
+ { USB_DEVICE(0x0cf3, 0xb002) }, /* Ubiquiti WifiStation */
{ USB_DEVICE(0x057c, 0x8403) }, /* AVM FRITZ!WLAN 11N v2 USB */
{ USB_DEVICE(0x0cf3, 0x7015),
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 8e1559a..1829b44 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -1456,7 +1456,7 @@
switch (type) {
case ATH9K_RESET_POWER_ON:
ret = ath9k_hw_set_reset_power_on(ah);
- if (!ret)
+ if (ret)
ah->reset_power_on = true;
break;
case ATH9K_RESET_WARM:
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index 378bd70..741918a 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -312,6 +312,7 @@
}
bf = list_first_entry(&sc->tx.txbuf, struct ath_buf, list);
+ bf->bf_next = NULL;
list_del(&bf->list);
spin_unlock_bh(&sc->tx.txbuflock);
@@ -393,7 +394,7 @@
u16 seq_st = 0, acked_cnt = 0, txfail_cnt = 0, seq_first;
u32 ba[WME_BA_BMP_SIZE >> 5];
int isaggr, txfail, txpending, sendbar = 0, needreset = 0, nbad = 0;
- bool rc_update = true;
+ bool rc_update = true, isba;
struct ieee80211_tx_rate rates[4];
struct ath_frame_info *fi;
int nframes;
@@ -437,13 +438,17 @@
tidno = ieee80211_get_qos_ctl(hdr)[0] & IEEE80211_QOS_CTL_TID_MASK;
tid = ATH_AN_2_TID(an, tidno);
seq_first = tid->seq_start;
+ isba = ts->ts_flags & ATH9K_TX_BA;
/*
* The hardware occasionally sends a tx status for the wrong TID.
* In this case, the BA status cannot be considered valid and all
* subframes need to be retransmitted
+ *
+ * Only BlockAcks have a TID and therefore normal Acks cannot be
+ * checked
*/
- if (tidno != ts->tid)
+ if (isba && tidno != ts->tid)
txok = false;
isaggr = bf_isaggr(bf);
@@ -1774,6 +1779,7 @@
list_add_tail(&bf->list, &bf_head);
bf->bf_state.bf_type = 0;
+ bf->bf_next = NULL;
bf->bf_lastbf = bf;
ath_tx_fill_desc(sc, bf, txq, fi->framelen);
ath_tx_txqaddbuf(sc, txq, &bf_head, false);
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 73730e9..c5a99c8 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -5404,6 +5404,8 @@
cancel_work_sync(&wldev->restart_work);
B43_WARN_ON(!wl);
+ if (!wldev->fw.ucode.data)
+ return; /* NULL if firmware never loaded */
if (wl->current_dev == wldev && wl->hw_registred) {
b43_leds_stop(wldev);
ieee80211_unregister_hw(wl->hw);
@@ -5478,6 +5480,8 @@
cancel_work_sync(&wldev->restart_work);
B43_WARN_ON(!wl);
+ if (!wldev->fw.ucode.data)
+ return; /* NULL if firmware never loaded */
if (wl->current_dev == wldev && wl->hw_registred) {
b43_leds_stop(wldev);
ieee80211_unregister_hw(wl->hw);
diff --git a/drivers/net/wireless/b43legacy/pio.c b/drivers/net/wireless/b43legacy/pio.c
index 192251a..282eede 100644
--- a/drivers/net/wireless/b43legacy/pio.c
+++ b/drivers/net/wireless/b43legacy/pio.c
@@ -382,7 +382,7 @@
{
struct b43legacy_pio_txpacket *packet, *tmp_packet;
- tasklet_disable(&queue->txtask);
+ tasklet_kill(&queue->txtask);
list_for_each_entry_safe(packet, tmp_packet, &queue->txrunning, list)
free_txpacket(packet, 0);
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/usb.c b/drivers/net/wireless/brcm80211/brcmfmac/usb.c
index a2b4b1e..7a6dfdc 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/usb.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/usb.c
@@ -1339,7 +1339,7 @@
}
ret = brcmf_bus_start(dev);
- if (ret == -ENOLINK) {
+ if (ret) {
brcmf_dbg(ERROR, "dongle is not responding\n");
brcmf_detach(dev);
goto fail;
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
index c1abaa6..481345c 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
@@ -3569,7 +3569,7 @@
if (!request || !request->n_ssids || !request->n_match_sets) {
WL_ERR("Invalid sched scan req!! n_ssids:%d\n",
- request->n_ssids);
+ request ? request->n_ssids : 0);
return -EINVAL;
}
@@ -3972,7 +3972,7 @@
u8 *iovar_ie_buf;
u8 *curr_ie_buf;
u8 *mgmt_ie_buf = NULL;
- u32 mgmt_ie_buf_len = 0;
+ int mgmt_ie_buf_len;
u32 *mgmt_ie_len = 0;
u32 del_add_ie_buf_len = 0;
u32 total_ie_buf_len = 0;
@@ -3982,7 +3982,7 @@
struct parsed_vndr_ie_info *vndrie_info;
s32 i;
u8 *ptr;
- u32 remained_buf_len;
+ int remained_buf_len;
WL_TRACE("bssidx %d, pktflag : 0x%02X\n", bssidx, pktflag);
iovar_ie_buf = kzalloc(WL_EXTRA_BUF_MAX, GFP_KERNEL);
@@ -4401,7 +4401,7 @@
static void brcmf_wiphy_pno_params(struct wiphy *wiphy)
{
-#ifndef CONFIG_BRCMFISCAN
+#ifndef CONFIG_BRCMISCAN
/* scheduled scan settings */
wiphy->max_sched_scan_ssids = BRCMF_PNO_MAX_PFN_COUNT;
wiphy->max_match_sets = BRCMF_PNO_MAX_PFN_COUNT;
@@ -4606,12 +4606,13 @@
struct brcmf_cfg80211_profile *profile = cfg->profile;
struct brcmf_cfg80211_connect_info *conn_info = cfg_to_conn(cfg);
struct wiphy *wiphy = cfg_to_wiphy(cfg);
- struct brcmf_channel_info_le channel_le;
- struct ieee80211_channel *notify_channel;
+ struct ieee80211_channel *notify_channel = NULL;
struct ieee80211_supported_band *band;
+ struct brcmf_bss_info_le *bi;
u32 freq;
s32 err = 0;
u32 target_channel;
+ u8 *buf;
WL_TRACE("Enter\n");
@@ -4619,11 +4620,22 @@
memcpy(profile->bssid, e->addr, ETH_ALEN);
brcmf_update_bss_info(cfg);
- brcmf_exec_dcmd(ndev, BRCMF_C_GET_CHANNEL, &channel_le,
- sizeof(channel_le));
+ buf = kzalloc(WL_BSS_INFO_MAX, GFP_KERNEL);
+ if (buf == NULL) {
+ err = -ENOMEM;
+ goto done;
+ }
- target_channel = le32_to_cpu(channel_le.target_channel);
- WL_CONN("Roamed to channel %d\n", target_channel);
+ /* data sent to dongle has to be little endian */
+ *(__le32 *)buf = cpu_to_le32(WL_BSS_INFO_MAX);
+ err = brcmf_exec_dcmd(ndev, BRCMF_C_GET_BSS_INFO, buf, WL_BSS_INFO_MAX);
+
+ if (err)
+ goto done;
+
+ bi = (struct brcmf_bss_info_le *)(buf + 4);
+ target_channel = bi->ctl_ch ? bi->ctl_ch :
+ CHSPEC_CHANNEL(le16_to_cpu(bi->chanspec));
if (target_channel <= CH_MAX_2G_CHANNEL)
band = wiphy->bands[IEEE80211_BAND_2GHZ];
@@ -4633,6 +4645,8 @@
freq = ieee80211_channel_to_frequency(target_channel, band->band);
notify_channel = ieee80211_get_channel(wiphy, freq);
+done:
+ kfree(buf);
cfg80211_roamed(ndev, notify_channel, (u8 *)profile->bssid,
conn_info->req_ie, conn_info->req_ie_len,
conn_info->resp_ie, conn_info->resp_ie_len, GFP_KERNEL);
@@ -5186,41 +5200,6 @@
schedule_work(&cfg->event_work);
}
-static s32 brcmf_dongle_mode(struct net_device *ndev, s32 iftype)
-{
- s32 infra = 0;
- s32 err = 0;
-
- switch (iftype) {
- case NL80211_IFTYPE_MONITOR:
- case NL80211_IFTYPE_WDS:
- WL_ERR("type (%d) : currently we do not support this mode\n",
- iftype);
- err = -EINVAL;
- return err;
- case NL80211_IFTYPE_ADHOC:
- infra = 0;
- break;
- case NL80211_IFTYPE_STATION:
- infra = 1;
- break;
- case NL80211_IFTYPE_AP:
- infra = 1;
- break;
- default:
- err = -EINVAL;
- WL_ERR("invalid type (%d)\n", iftype);
- return err;
- }
- err = brcmf_exec_dcmd_u32(ndev, BRCMF_C_SET_INFRA, &infra);
- if (err) {
- WL_ERR("WLC_SET_INFRA error (%d)\n", err);
- return err;
- }
-
- return 0;
-}
-
static s32 brcmf_dongle_eventmsg(struct net_device *ndev)
{
/* Room for "event_msgs" + '\0' + bitvec */
@@ -5439,7 +5418,8 @@
WL_BEACON_TIMEOUT);
if (err)
goto default_conf_out;
- err = brcmf_dongle_mode(ndev, wdev->iftype);
+ err = brcmf_cfg80211_change_iface(wdev->wiphy, ndev, wdev->iftype,
+ NULL, NULL);
if (err && err != -EINPROGRESS)
goto default_conf_out;
err = brcmf_dongle_probecap(cfg);
diff --git a/drivers/net/wireless/ipw2x00/ipw2200.c b/drivers/net/wireless/ipw2x00/ipw2200.c
index 935120f..768bf61 100644
--- a/drivers/net/wireless/ipw2x00/ipw2200.c
+++ b/drivers/net/wireless/ipw2x00/ipw2200.c
@@ -10472,7 +10472,7 @@
} else
len = src->len;
- dst = alloc_skb(len + sizeof(*rt_hdr), GFP_ATOMIC);
+ dst = alloc_skb(len + sizeof(*rt_hdr) + sizeof(u16)*2, GFP_ATOMIC);
if (!dst)
continue;
diff --git a/drivers/net/wireless/iwlwifi/dvm/devices.c b/drivers/net/wireless/iwlwifi/dvm/devices.c
index 349c205..da58620 100644
--- a/drivers/net/wireless/iwlwifi/dvm/devices.c
+++ b/drivers/net/wireless/iwlwifi/dvm/devices.c
@@ -518,7 +518,7 @@
* See iwlagn_mac_channel_switch.
*/
struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
- struct iwl6000_channel_switch_cmd cmd;
+ struct iwl6000_channel_switch_cmd *cmd;
u32 switch_time_in_usec, ucode_switch_time;
u16 ch;
u32 tsf_low;
@@ -527,18 +527,25 @@
struct ieee80211_vif *vif = ctx->vif;
struct iwl_host_cmd hcmd = {
.id = REPLY_CHANNEL_SWITCH,
- .len = { sizeof(cmd), },
+ .len = { sizeof(*cmd), },
.flags = CMD_SYNC,
- .data = { &cmd, },
+ .dataflags[0] = IWL_HCMD_DFL_NOCOPY,
};
+ int err;
- cmd.band = priv->band == IEEE80211_BAND_2GHZ;
+ cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+ if (!cmd)
+ return -ENOMEM;
+
+ hcmd.data[0] = cmd;
+
+ cmd->band = priv->band == IEEE80211_BAND_2GHZ;
ch = ch_switch->channel->hw_value;
IWL_DEBUG_11H(priv, "channel switch from %u to %u\n",
ctx->active.channel, ch);
- cmd.channel = cpu_to_le16(ch);
- cmd.rxon_flags = ctx->staging.flags;
- cmd.rxon_filter_flags = ctx->staging.filter_flags;
+ cmd->channel = cpu_to_le16(ch);
+ cmd->rxon_flags = ctx->staging.flags;
+ cmd->rxon_filter_flags = ctx->staging.filter_flags;
switch_count = ch_switch->count;
tsf_low = ch_switch->timestamp & 0x0ffffffff;
/*
@@ -554,23 +561,25 @@
switch_count = 0;
}
if (switch_count <= 1)
- cmd.switch_time = cpu_to_le32(priv->ucode_beacon_time);
+ cmd->switch_time = cpu_to_le32(priv->ucode_beacon_time);
else {
switch_time_in_usec =
vif->bss_conf.beacon_int * switch_count * TIME_UNIT;
ucode_switch_time = iwl_usecs_to_beacons(priv,
switch_time_in_usec,
beacon_interval);
- cmd.switch_time = iwl_add_beacon_time(priv,
- priv->ucode_beacon_time,
- ucode_switch_time,
- beacon_interval);
+ cmd->switch_time = iwl_add_beacon_time(priv,
+ priv->ucode_beacon_time,
+ ucode_switch_time,
+ beacon_interval);
}
IWL_DEBUG_11H(priv, "uCode time for the switch is 0x%x\n",
- cmd.switch_time);
- cmd.expect_beacon = ch_switch->channel->flags & IEEE80211_CHAN_RADAR;
+ cmd->switch_time);
+ cmd->expect_beacon = ch_switch->channel->flags & IEEE80211_CHAN_RADAR;
- return iwl_dvm_send_cmd(priv, &hcmd);
+ err = iwl_dvm_send_cmd(priv, &hcmd);
+ kfree(cmd);
+ return err;
}
struct iwl_lib_ops iwl6000_lib = {
diff --git a/drivers/net/wireless/iwlwifi/dvm/mac80211.c b/drivers/net/wireless/iwlwifi/dvm/mac80211.c
index ff8162d..2d9eee9 100644
--- a/drivers/net/wireless/iwlwifi/dvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/dvm/mac80211.c
@@ -521,7 +521,7 @@
ieee80211_get_tx_rate(hw, IEEE80211_SKB_CB(skb))->bitrate);
if (iwlagn_tx_skb(priv, control->sta, skb))
- dev_kfree_skb_any(skb);
+ ieee80211_free_txskb(hw, skb);
}
static void iwlagn_mac_update_tkip_key(struct ieee80211_hw *hw,
@@ -1354,6 +1354,20 @@
vif_priv->ctx = ctx;
ctx->vif = vif;
+ /*
+ * In SNIFFER device type, the firmware reports the FCS to
+ * the host, rather than snipping it off. Unfortunately,
+ * mac80211 doesn't (yet) provide a per-packet flag for
+ * this, so that we have to set the hardware flag based
+ * on the interfaces added. As the monitor interface can
+ * only be present by itself, and will be removed before
+ * other interfaces are added, this is safe.
+ */
+ if (vif->type == NL80211_IFTYPE_MONITOR)
+ priv->hw->flags |= IEEE80211_HW_RX_INCLUDES_FCS;
+ else
+ priv->hw->flags &= ~IEEE80211_HW_RX_INCLUDES_FCS;
+
err = iwl_setup_interface(priv, ctx);
if (!err || reset)
goto out;
diff --git a/drivers/net/wireless/iwlwifi/dvm/main.c b/drivers/net/wireless/iwlwifi/dvm/main.c
index 7ff3f143..408132c 100644
--- a/drivers/net/wireless/iwlwifi/dvm/main.c
+++ b/drivers/net/wireless/iwlwifi/dvm/main.c
@@ -2114,7 +2114,7 @@
info = IEEE80211_SKB_CB(skb);
iwl_trans_free_tx_cmd(priv->trans, info->driver_data[1]);
- dev_kfree_skb_any(skb);
+ ieee80211_free_txskb(priv->hw, skb);
}
static void iwl_set_hw_rfkill_state(struct iwl_op_mode *op_mode, bool state)
diff --git a/drivers/net/wireless/iwlwifi/pcie/rx.c b/drivers/net/wireless/iwlwifi/pcie/rx.c
index 17c8e5d..bb69f8f 100644
--- a/drivers/net/wireless/iwlwifi/pcie/rx.c
+++ b/drivers/net/wireless/iwlwifi/pcie/rx.c
@@ -321,6 +321,14 @@
dma_map_page(trans->dev, page, 0,
PAGE_SIZE << trans_pcie->rx_page_order,
DMA_FROM_DEVICE);
+ if (dma_mapping_error(trans->dev, rxb->page_dma)) {
+ rxb->page = NULL;
+ spin_lock_irqsave(&rxq->lock, flags);
+ list_add(&rxb->list, &rxq->rx_used);
+ spin_unlock_irqrestore(&rxq->lock, flags);
+ __free_pages(page, trans_pcie->rx_page_order);
+ return;
+ }
/* dma address must be no more than 36 bits */
BUG_ON(rxb->page_dma & ~DMA_BIT_MASK(36));
/* and also 256 byte aligned! */
@@ -488,8 +496,19 @@
dma_map_page(trans->dev, rxb->page, 0,
PAGE_SIZE << trans_pcie->rx_page_order,
DMA_FROM_DEVICE);
- list_add_tail(&rxb->list, &rxq->rx_free);
- rxq->free_count++;
+ if (dma_mapping_error(trans->dev, rxb->page_dma)) {
+ /*
+ * free the page(s) as well to not break
+ * the invariant that the items on the used
+ * list have no page(s)
+ */
+ __free_pages(rxb->page, trans_pcie->rx_page_order);
+ rxb->page = NULL;
+ list_add_tail(&rxb->list, &rxq->rx_used);
+ } else {
+ list_add_tail(&rxb->list, &rxq->rx_free);
+ rxq->free_count++;
+ }
} else
list_add_tail(&rxb->list, &rxq->rx_used);
spin_unlock_irqrestore(&rxq->lock, flags);
diff --git a/drivers/net/wireless/iwlwifi/pcie/tx.c b/drivers/net/wireless/iwlwifi/pcie/tx.c
index 105e3af..79a4ddc 100644
--- a/drivers/net/wireless/iwlwifi/pcie/tx.c
+++ b/drivers/net/wireless/iwlwifi/pcie/tx.c
@@ -480,20 +480,12 @@
void iwl_trans_pcie_txq_disable(struct iwl_trans *trans, int txq_id)
{
struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
- u16 rd_ptr, wr_ptr;
- int n_bd = trans_pcie->txq[txq_id].q.n_bd;
if (!test_and_clear_bit(txq_id, trans_pcie->queue_used)) {
WARN_ONCE(1, "queue %d not used", txq_id);
return;
}
- rd_ptr = iwl_read_prph(trans, SCD_QUEUE_RDPTR(txq_id)) & (n_bd - 1);
- wr_ptr = iwl_read_prph(trans, SCD_QUEUE_WRPTR(txq_id));
-
- WARN_ONCE(rd_ptr != wr_ptr, "queue %d isn't empty: [%d,%d]",
- txq_id, rd_ptr, wr_ptr);
-
iwl_txq_set_inactive(trans, txq_id);
IWL_DEBUG_TX_QUEUES(trans, "Deactivate queue %d\n", txq_id);
}
diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c
index 0679458..780d3e1 100644
--- a/drivers/net/wireless/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/mwifiex/cfg80211.c
@@ -1825,8 +1825,6 @@
return -EBUSY;
}
- priv->scan_request = request;
-
priv->user_scan_cfg = kzalloc(sizeof(struct mwifiex_user_scan_cfg),
GFP_KERNEL);
if (!priv->user_scan_cfg) {
@@ -1834,6 +1832,8 @@
return -ENOMEM;
}
+ priv->scan_request = request;
+
priv->user_scan_cfg->num_ssids = request->n_ssids;
priv->user_scan_cfg->ssid_list = request->ssids;
@@ -1870,6 +1870,9 @@
ret = mwifiex_scan_networks(priv, priv->user_scan_cfg);
if (ret) {
dev_err(priv->adapter->dev, "scan failed: %d\n", ret);
+ priv->scan_request = NULL;
+ kfree(priv->user_scan_cfg);
+ priv->user_scan_cfg = NULL;
return ret;
}
diff --git a/drivers/net/wireless/mwifiex/cmdevt.c b/drivers/net/wireless/mwifiex/cmdevt.c
index 8d46510..ae9010e 100644
--- a/drivers/net/wireless/mwifiex/cmdevt.c
+++ b/drivers/net/wireless/mwifiex/cmdevt.c
@@ -890,9 +890,6 @@
return;
}
cmd_node = adapter->curr_cmd;
- if (cmd_node->wait_q_enabled)
- adapter->cmd_wait_q.status = -ETIMEDOUT;
-
if (cmd_node) {
adapter->dbg.timeout_cmd_id =
adapter->dbg.last_cmd_id[adapter->dbg.last_cmd_index];
@@ -938,6 +935,14 @@
dev_err(adapter->dev, "ps_mode=%d ps_state=%d\n",
adapter->ps_mode, adapter->ps_state);
+
+ if (cmd_node->wait_q_enabled) {
+ adapter->cmd_wait_q.status = -ETIMEDOUT;
+ wake_up_interruptible(&adapter->cmd_wait_q.wait);
+ mwifiex_cancel_pending_ioctl(adapter);
+ /* reset cmd_sent flag to unblock new commands */
+ adapter->cmd_sent = false;
+ }
}
if (adapter->hw_status == MWIFIEX_HW_STATUS_INITIALIZING)
mwifiex_init_fw_complete(adapter);
diff --git a/drivers/net/wireless/mwifiex/scan.c b/drivers/net/wireless/mwifiex/scan.c
index 00b658d..9171aae 100644
--- a/drivers/net/wireless/mwifiex/scan.c
+++ b/drivers/net/wireless/mwifiex/scan.c
@@ -1843,21 +1843,18 @@
struct cfg80211_ssid *req_ssid)
{
struct mwifiex_adapter *adapter = priv->adapter;
- int ret = 0;
+ int ret;
struct mwifiex_user_scan_cfg *scan_cfg;
- if (!req_ssid)
- return -1;
-
if (adapter->scan_processing) {
- dev_dbg(adapter->dev, "cmd: Scan already in process...\n");
- return ret;
+ dev_err(adapter->dev, "cmd: Scan already in process...\n");
+ return -EBUSY;
}
if (priv->scan_block) {
- dev_dbg(adapter->dev,
+ dev_err(adapter->dev,
"cmd: Scan is blocked during association...\n");
- return ret;
+ return -EBUSY;
}
scan_cfg = kzalloc(sizeof(struct mwifiex_user_scan_cfg), GFP_KERNEL);
diff --git a/drivers/net/wireless/mwifiex/sdio.c b/drivers/net/wireless/mwifiex/sdio.c
index fc8a9bf..82cf0fa 100644
--- a/drivers/net/wireless/mwifiex/sdio.c
+++ b/drivers/net/wireless/mwifiex/sdio.c
@@ -161,7 +161,6 @@
struct sdio_mmc_card *card;
struct mwifiex_adapter *adapter;
mmc_pm_flag_t pm_flag = 0;
- int hs_actived = 0;
int i;
int ret = 0;
@@ -188,12 +187,14 @@
adapter = card->adapter;
/* Enable the Host Sleep */
- hs_actived = mwifiex_enable_hs(adapter);
- if (hs_actived) {
- pr_debug("cmd: suspend with MMC_PM_KEEP_POWER\n");
- ret = sdio_set_host_pm_flags(func, MMC_PM_KEEP_POWER);
+ if (!mwifiex_enable_hs(adapter)) {
+ dev_err(adapter->dev, "cmd: failed to suspend\n");
+ return -EFAULT;
}
+ dev_dbg(adapter->dev, "cmd: suspend with MMC_PM_KEEP_POWER\n");
+ ret = sdio_set_host_pm_flags(func, MMC_PM_KEEP_POWER);
+
/* Indicate device suspended */
adapter->is_suspended = true;
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index a12e84f..6b2e1e43 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -1988,6 +1988,7 @@
.disconnect = rt2x00usb_disconnect,
.suspend = rt2x00usb_suspend,
.resume = rt2x00usb_resume,
+ .reset_resume = rt2x00usb_resume,
.disable_hub_initiated_lpm = 1,
};
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 01dc889..59474ae 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -2449,7 +2449,7 @@
/*
* Check if temperature compensation is supported.
*/
- if (tssi_bounds[4] == 0xff)
+ if (tssi_bounds[4] == 0xff || step == 0xff)
return 0;
/*
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index c9e9370..3b8fb5a 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -1282,6 +1282,7 @@
.disconnect = rt2x00usb_disconnect,
.suspend = rt2x00usb_suspend,
.resume = rt2x00usb_resume,
+ .reset_resume = rt2x00usb_resume,
.disable_hub_initiated_lpm = 1,
};
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index e5eb43b..24eec66 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -2535,6 +2535,7 @@
.disconnect = rt2x00usb_disconnect,
.suspend = rt2x00usb_suspend,
.resume = rt2x00usb_resume,
+ .reset_resume = rt2x00usb_resume,
.disable_hub_initiated_lpm = 1,
};
diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
index 9970c2b..b7e6607 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
@@ -297,6 +297,7 @@
/*=== Customer ID ===*/
/****** 8188CU ********/
{RTL_USB_DEVICE(0x050d, 0x1102, rtl92cu_hal_cfg)}, /*Belkin - Edimax*/
+ {RTL_USB_DEVICE(0x050d, 0x11f2, rtl92cu_hal_cfg)}, /*Belkin - ISY*/
{RTL_USB_DEVICE(0x06f8, 0xe033, rtl92cu_hal_cfg)}, /*Hercules - Edimax*/
{RTL_USB_DEVICE(0x07b8, 0x8188, rtl92cu_hal_cfg)}, /*Abocom - Abocom*/
{RTL_USB_DEVICE(0x07b8, 0x8189, rtl92cu_hal_cfg)}, /*Funai - Abocom*/
diff --git a/drivers/net/wireless/rtlwifi/usb.c b/drivers/net/wireless/rtlwifi/usb.c
index 030beb4..e3ea4b3 100644
--- a/drivers/net/wireless/rtlwifi/usb.c
+++ b/drivers/net/wireless/rtlwifi/usb.c
@@ -673,7 +673,7 @@
set_hal_start(rtlhal);
/* Start bulk IN */
- _rtl_usb_receive(hw);
+ err = _rtl_usb_receive(hw);
}
return err;
diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c
index caa0110..fc24eb9 100644
--- a/drivers/net/xen-netfront.c
+++ b/drivers/net/xen-netfront.c
@@ -452,29 +452,85 @@
/* Grant backend access to each skb fragment page. */
for (i = 0; i < frags; i++) {
skb_frag_t *frag = skb_shinfo(skb)->frags + i;
+ struct page *page = skb_frag_page(frag);
- tx->flags |= XEN_NETTXF_more_data;
+ len = skb_frag_size(frag);
+ offset = frag->page_offset;
- id = get_id_from_freelist(&np->tx_skb_freelist, np->tx_skbs);
- np->tx_skbs[id].skb = skb_get(skb);
- tx = RING_GET_REQUEST(&np->tx, prod++);
- tx->id = id;
- ref = gnttab_claim_grant_reference(&np->gref_tx_head);
- BUG_ON((signed short)ref < 0);
+ /* Data must not cross a page boundary. */
+ BUG_ON(len + offset > PAGE_SIZE<<compound_order(page));
- mfn = pfn_to_mfn(page_to_pfn(skb_frag_page(frag)));
- gnttab_grant_foreign_access_ref(ref, np->xbdev->otherend_id,
- mfn, GNTMAP_readonly);
+ /* Skip unused frames from start of page */
+ page += offset >> PAGE_SHIFT;
+ offset &= ~PAGE_MASK;
- tx->gref = np->grant_tx_ref[id] = ref;
- tx->offset = frag->page_offset;
- tx->size = skb_frag_size(frag);
- tx->flags = 0;
+ while (len > 0) {
+ unsigned long bytes;
+
+ BUG_ON(offset >= PAGE_SIZE);
+
+ bytes = PAGE_SIZE - offset;
+ if (bytes > len)
+ bytes = len;
+
+ tx->flags |= XEN_NETTXF_more_data;
+
+ id = get_id_from_freelist(&np->tx_skb_freelist,
+ np->tx_skbs);
+ np->tx_skbs[id].skb = skb_get(skb);
+ tx = RING_GET_REQUEST(&np->tx, prod++);
+ tx->id = id;
+ ref = gnttab_claim_grant_reference(&np->gref_tx_head);
+ BUG_ON((signed short)ref < 0);
+
+ mfn = pfn_to_mfn(page_to_pfn(page));
+ gnttab_grant_foreign_access_ref(ref,
+ np->xbdev->otherend_id,
+ mfn, GNTMAP_readonly);
+
+ tx->gref = np->grant_tx_ref[id] = ref;
+ tx->offset = offset;
+ tx->size = bytes;
+ tx->flags = 0;
+
+ offset += bytes;
+ len -= bytes;
+
+ /* Next frame */
+ if (offset == PAGE_SIZE && len) {
+ BUG_ON(!PageCompound(page));
+ page++;
+ offset = 0;
+ }
+ }
}
np->tx.req_prod_pvt = prod;
}
+/*
+ * Count how many ring slots are required to send the frags of this
+ * skb. Each frag might be a compound page.
+ */
+static int xennet_count_skb_frag_slots(struct sk_buff *skb)
+{
+ int i, frags = skb_shinfo(skb)->nr_frags;
+ int pages = 0;
+
+ for (i = 0; i < frags; i++) {
+ skb_frag_t *frag = skb_shinfo(skb)->frags + i;
+ unsigned long size = skb_frag_size(frag);
+ unsigned long offset = frag->page_offset;
+
+ /* Skip unused frames from start of page */
+ offset &= ~PAGE_MASK;
+
+ pages += PFN_UP(offset + size);
+ }
+
+ return pages;
+}
+
static int xennet_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
unsigned short id;
@@ -487,23 +543,23 @@
grant_ref_t ref;
unsigned long mfn;
int notify;
- int frags = skb_shinfo(skb)->nr_frags;
+ int slots;
unsigned int offset = offset_in_page(data);
unsigned int len = skb_headlen(skb);
unsigned long flags;
- frags += DIV_ROUND_UP(offset + len, PAGE_SIZE);
- if (unlikely(frags > MAX_SKB_FRAGS + 1)) {
- printk(KERN_ALERT "xennet: skb rides the rocket: %d frags\n",
- frags);
- dump_stack();
+ slots = DIV_ROUND_UP(offset + len, PAGE_SIZE) +
+ xennet_count_skb_frag_slots(skb);
+ if (unlikely(slots > MAX_SKB_FRAGS + 1)) {
+ net_alert_ratelimited(
+ "xennet: skb rides the rocket: %d slots\n", slots);
goto drop;
}
spin_lock_irqsave(&np->tx_lock, flags);
if (unlikely(!netif_carrier_ok(dev) ||
- (frags > 1 && !xennet_can_sg(dev)) ||
+ (slots > 1 && !xennet_can_sg(dev)) ||
netif_needs_gso(skb, netif_skb_features(skb)))) {
spin_unlock_irqrestore(&np->tx_lock, flags);
goto drop;
diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c
index 97c440a..30ae18a 100644
--- a/drivers/nfc/pn533.c
+++ b/drivers/nfc/pn533.c
@@ -698,13 +698,14 @@
cmd = list_first_entry(&dev->cmd_queue, struct pn533_cmd, queue);
+ list_del(&cmd->queue);
+
mutex_unlock(&dev->cmd_lock);
__pn533_send_cmd_frame_async(dev, cmd->out_frame, cmd->in_frame,
cmd->in_frame_len, cmd->cmd_complete,
cmd->arg, cmd->flags);
- list_del(&cmd->queue);
kfree(cmd);
}
@@ -1678,11 +1679,14 @@
static int pn533_in_dep_link_up_complete(struct pn533 *dev, void *arg,
u8 *params, int params_len)
{
- struct pn533_cmd_jump_dep *cmd;
struct pn533_cmd_jump_dep_response *resp;
struct nfc_target nfc_target;
u8 target_gt_len;
int rc;
+ struct pn533_cmd_jump_dep *cmd = (struct pn533_cmd_jump_dep *)arg;
+ u8 active = cmd->active;
+
+ kfree(arg);
if (params_len == -ENOENT) {
nfc_dev_dbg(&dev->interface->dev, "");
@@ -1704,7 +1708,6 @@
}
resp = (struct pn533_cmd_jump_dep_response *) params;
- cmd = (struct pn533_cmd_jump_dep *) arg;
rc = resp->status & PN533_CMD_RET_MASK;
if (rc != PN533_CMD_RET_SUCCESS) {
nfc_dev_err(&dev->interface->dev,
@@ -1734,7 +1737,7 @@
if (rc == 0)
rc = nfc_dep_link_is_up(dev->nfc_dev,
dev->nfc_dev->targets[0].idx,
- !cmd->active, NFC_RF_INITIATOR);
+ !active, NFC_RF_INITIATOR);
return 0;
}
@@ -1819,12 +1822,8 @@
rc = pn533_send_cmd_frame_async(dev, dev->out_frame, dev->in_frame,
dev->in_maxlen, pn533_in_dep_link_up_complete,
cmd, GFP_KERNEL);
- if (rc)
- goto out;
-
-
-out:
- kfree(cmd);
+ if (rc < 0)
+ kfree(cmd);
return rc;
}
@@ -2078,8 +2077,12 @@
static int pn533_tm_send_complete(struct pn533 *dev, void *arg,
u8 *params, int params_len)
{
+ struct sk_buff *skb_out = arg;
+
nfc_dev_dbg(&dev->interface->dev, "%s", __func__);
+ dev_kfree_skb(skb_out);
+
if (params_len < 0) {
nfc_dev_err(&dev->interface->dev,
"Error %d when sending data",
@@ -2117,7 +2120,7 @@
rc = pn533_send_cmd_frame_async(dev, out_frame, dev->in_frame,
dev->in_maxlen, pn533_tm_send_complete,
- NULL, GFP_KERNEL);
+ skb, GFP_KERNEL);
if (rc) {
nfc_dev_err(&dev->interface->dev,
"Error %d when trying to send data", rc);
diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c
index 6241fd0..a543746 100644
--- a/drivers/pci/bus.c
+++ b/drivers/pci/bus.c
@@ -320,10 +320,7 @@
} else
next = dev->bus_list.next;
- /* Run device routines with the device locked */
- device_lock(&dev->dev);
retval = cb(dev, userdata);
- device_unlock(&dev->dev);
if (retval)
break;
}
diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index 94c6e2a..6c94fc9 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -398,6 +398,8 @@
struct pci_dev *pci_dev = to_pci_dev(dev);
struct pci_driver *drv = pci_dev->driver;
+ pm_runtime_resume(dev);
+
if (drv && drv->shutdown)
drv->shutdown(pci_dev);
pci_msi_shutdown(pci_dev);
@@ -408,16 +410,6 @@
* continue to do DMA
*/
pci_disable_device(pci_dev);
-
- /*
- * Devices may be enabled to wake up by runtime PM, but they need not
- * be supposed to wake up the system from its "power off" state (e.g.
- * ACPI S5). Therefore disable wakeup for all devices that aren't
- * supposed to wake up the system at this point. The state argument
- * will be ignored by pci_enable_wake().
- */
- if (!device_may_wakeup(dev))
- pci_enable_wake(pci_dev, PCI_UNKNOWN, false);
}
#ifdef CONFIG_PM
diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
index 02d107b..f39378d 100644
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -458,40 +458,6 @@
}
struct device_attribute vga_attr = __ATTR_RO(boot_vga);
-static void
-pci_config_pm_runtime_get(struct pci_dev *pdev)
-{
- struct device *dev = &pdev->dev;
- struct device *parent = dev->parent;
-
- if (parent)
- pm_runtime_get_sync(parent);
- pm_runtime_get_noresume(dev);
- /*
- * pdev->current_state is set to PCI_D3cold during suspending,
- * so wait until suspending completes
- */
- pm_runtime_barrier(dev);
- /*
- * Only need to resume devices in D3cold, because config
- * registers are still accessible for devices suspended but
- * not in D3cold.
- */
- if (pdev->current_state == PCI_D3cold)
- pm_runtime_resume(dev);
-}
-
-static void
-pci_config_pm_runtime_put(struct pci_dev *pdev)
-{
- struct device *dev = &pdev->dev;
- struct device *parent = dev->parent;
-
- pm_runtime_put(dev);
- if (parent)
- pm_runtime_put_sync(parent);
-}
-
static ssize_t
pci_read_config(struct file *filp, struct kobject *kobj,
struct bin_attribute *bin_attr,
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 5485883..aabf647 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1858,6 +1858,38 @@
}
EXPORT_SYMBOL_GPL(pci_dev_run_wake);
+void pci_config_pm_runtime_get(struct pci_dev *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device *parent = dev->parent;
+
+ if (parent)
+ pm_runtime_get_sync(parent);
+ pm_runtime_get_noresume(dev);
+ /*
+ * pdev->current_state is set to PCI_D3cold during suspending,
+ * so wait until suspending completes
+ */
+ pm_runtime_barrier(dev);
+ /*
+ * Only need to resume devices in D3cold, because config
+ * registers are still accessible for devices suspended but
+ * not in D3cold.
+ */
+ if (pdev->current_state == PCI_D3cold)
+ pm_runtime_resume(dev);
+}
+
+void pci_config_pm_runtime_put(struct pci_dev *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device *parent = dev->parent;
+
+ pm_runtime_put(dev);
+ if (parent)
+ pm_runtime_put_sync(parent);
+}
+
/**
* pci_pm_init - Initialize PM functions of given PCI device
* @dev: PCI device to handle.
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index bacbcba..fd92aab 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -72,6 +72,8 @@
extern int pci_finish_runtime_suspend(struct pci_dev *dev);
extern int __pci_pme_wakeup(struct pci_dev *dev, void *ign);
extern void pci_wakeup_bus(struct pci_bus *bus);
+extern void pci_config_pm_runtime_get(struct pci_dev *dev);
+extern void pci_config_pm_runtime_put(struct pci_dev *dev);
extern void pci_pm_init(struct pci_dev *dev);
extern void platform_pci_wakeup_init(struct pci_dev *dev);
extern void pci_allocate_cap_save_buffers(struct pci_dev *dev);
diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c
index 06bad96..af4e31c 100644
--- a/drivers/pci/pcie/aer/aerdrv_core.c
+++ b/drivers/pci/pcie/aer/aerdrv_core.c
@@ -213,6 +213,7 @@
struct aer_broadcast_data *result_data;
result_data = (struct aer_broadcast_data *) data;
+ device_lock(&dev->dev);
dev->error_state = result_data->state;
if (!dev->driver ||
@@ -231,12 +232,14 @@
dev->driver ?
"no AER-aware driver" : "no driver");
}
- return 0;
+ goto out;
}
err_handler = dev->driver->err_handler;
vote = err_handler->error_detected(dev, result_data->state);
result_data->result = merge_result(result_data->result, vote);
+out:
+ device_unlock(&dev->dev);
return 0;
}
@@ -247,14 +250,17 @@
struct aer_broadcast_data *result_data;
result_data = (struct aer_broadcast_data *) data;
+ device_lock(&dev->dev);
if (!dev->driver ||
!dev->driver->err_handler ||
!dev->driver->err_handler->mmio_enabled)
- return 0;
+ goto out;
err_handler = dev->driver->err_handler;
vote = err_handler->mmio_enabled(dev);
result_data->result = merge_result(result_data->result, vote);
+out:
+ device_unlock(&dev->dev);
return 0;
}
@@ -265,14 +271,17 @@
struct aer_broadcast_data *result_data;
result_data = (struct aer_broadcast_data *) data;
+ device_lock(&dev->dev);
if (!dev->driver ||
!dev->driver->err_handler ||
!dev->driver->err_handler->slot_reset)
- return 0;
+ goto out;
err_handler = dev->driver->err_handler;
vote = err_handler->slot_reset(dev);
result_data->result = merge_result(result_data->result, vote);
+out:
+ device_unlock(&dev->dev);
return 0;
}
@@ -280,15 +289,18 @@
{
const struct pci_error_handlers *err_handler;
+ device_lock(&dev->dev);
dev->error_state = pci_channel_io_normal;
if (!dev->driver ||
!dev->driver->err_handler ||
!dev->driver->err_handler->resume)
- return 0;
+ goto out;
err_handler = dev->driver->err_handler;
err_handler->resume(dev);
+out:
+ device_unlock(&dev->dev);
return 0;
}
diff --git a/drivers/pci/pcie/portdrv_core.c b/drivers/pci/pcie/portdrv_core.c
index d03a7a3..ed129b4 100644
--- a/drivers/pci/pcie/portdrv_core.c
+++ b/drivers/pci/pcie/portdrv_core.c
@@ -272,7 +272,8 @@
}
/* Hot-Plug Capable */
- if (cap_mask & PCIE_PORT_SERVICE_HP) {
+ if ((cap_mask & PCIE_PORT_SERVICE_HP) &&
+ dev->pcie_flags_reg & PCI_EXP_FLAGS_SLOT) {
pcie_capability_read_dword(dev, PCI_EXP_SLTCAP, ®32);
if (reg32 & PCI_EXP_SLTCAP_HPC) {
services |= PCIE_PORT_SERVICE_HP;
diff --git a/drivers/pci/proc.c b/drivers/pci/proc.c
index eb907a8f..9b8505c 100644
--- a/drivers/pci/proc.c
+++ b/drivers/pci/proc.c
@@ -76,6 +76,8 @@
if (!access_ok(VERIFY_WRITE, buf, cnt))
return -EINVAL;
+ pci_config_pm_runtime_get(dev);
+
if ((pos & 1) && cnt) {
unsigned char val;
pci_user_read_config_byte(dev, pos, &val);
@@ -121,6 +123,8 @@
cnt--;
}
+ pci_config_pm_runtime_put(dev);
+
*ppos = pos;
return nbytes;
}
@@ -146,6 +150,8 @@
if (!access_ok(VERIFY_READ, buf, cnt))
return -EINVAL;
+ pci_config_pm_runtime_get(dev);
+
if ((pos & 1) && cnt) {
unsigned char val;
__get_user(val, buf);
@@ -191,6 +197,8 @@
cnt--;
}
+ pci_config_pm_runtime_put(dev);
+
*ppos = pos;
i_size_write(ino, dp->size);
return nbytes;
diff --git a/drivers/pcmcia/omap_cf.c b/drivers/pcmcia/omap_cf.c
index fa74efe..25c4b199 100644
--- a/drivers/pcmcia/omap_cf.c
+++ b/drivers/pcmcia/omap_cf.c
@@ -25,7 +25,7 @@
#include <asm/sizes.h>
#include <mach/mux.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
/* NOTE: don't expect this to support many I/O cards. The 16xx chips have
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index 7bf914d..aeecf0f 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -178,12 +178,14 @@
ports of 8 GPIO pins each.
config PINCTRL_SAMSUNG
- bool "Samsung pinctrl driver"
+ bool
+ depends on OF && GPIOLIB
select PINMUX
select PINCONF
config PINCTRL_EXYNOS4
bool "Pinctrl driver data for Exynos4 SoC"
+ depends on OF && GPIOLIB
select PINCTRL_SAMSUNG
config PINCTRL_MVEBU
diff --git a/drivers/pinctrl/core.c b/drivers/pinctrl/core.c
index 0f1ec9e..2e39c04 100644
--- a/drivers/pinctrl/core.c
+++ b/drivers/pinctrl/core.c
@@ -1061,8 +1061,10 @@
seq_printf(s, "group: %s\n", gname);
for (i = 0; i < num_pins; i++) {
pname = pin_get_name(pctldev, pins[i]);
- if (WARN_ON(!pname))
+ if (WARN_ON(!pname)) {
+ mutex_unlock(&pinctrl_mutex);
return -EINVAL;
+ }
seq_printf(s, "pin %d (%s)\n", pins[i], pname);
}
seq_puts(s, "\n");
diff --git a/drivers/pinctrl/pinconf.c b/drivers/pinctrl/pinconf.c
index 43f474c..baee2cc 100644
--- a/drivers/pinctrl/pinconf.c
+++ b/drivers/pinctrl/pinconf.c
@@ -537,8 +537,6 @@
seq_puts(s, "Pin config settings per pin group\n");
seq_puts(s, "Format: group (name): configs\n");
- mutex_lock(&pinctrl_mutex);
-
while (selector < ngroups) {
const char *gname = pctlops->get_group_name(pctldev, selector);
@@ -549,8 +547,6 @@
selector++;
}
- mutex_unlock(&pinctrl_mutex);
-
return 0;
}
diff --git a/drivers/pinctrl/pinctrl-nomadik.c b/drivers/pinctrl/pinctrl-nomadik.c
index 01aea1c..cf82d9c 100644
--- a/drivers/pinctrl/pinctrl-nomadik.c
+++ b/drivers/pinctrl/pinctrl-nomadik.c
@@ -1056,7 +1056,7 @@
struct nmk_gpio_chip *nmk_chip =
container_of(chip, struct nmk_gpio_chip, chip);
- return irq_find_mapping(nmk_chip->domain, offset);
+ return irq_create_mapping(nmk_chip->domain, offset);
}
#ifdef CONFIG_DEBUG_FS
@@ -1281,7 +1281,7 @@
struct clk *clk;
int secondary_irq;
void __iomem *base;
- int irq_start = -1;
+ int irq_start = 0;
int irq;
int ret;
@@ -1387,7 +1387,7 @@
if (!np)
irq_start = NOMADIK_GPIO_TO_IRQ(pdata->first_gpio);
- nmk_chip->domain = irq_domain_add_simple(NULL,
+ nmk_chip->domain = irq_domain_add_simple(np,
NMK_GPIO_PER_CHIP, irq_start,
&nmk_gpio_irq_simple_ops, nmk_chip);
if (!nmk_chip->domain) {
diff --git a/drivers/pinctrl/pinctrl-tegra.c b/drivers/pinctrl/pinctrl-tegra.c
index 729b686..7da0b37 100644
--- a/drivers/pinctrl/pinctrl-tegra.c
+++ b/drivers/pinctrl/pinctrl-tegra.c
@@ -464,7 +464,7 @@
*bank = g->drv_bank;
*reg = g->drv_reg;
*bit = g->lpmd_bit;
- *width = 1;
+ *width = 2;
break;
case TEGRA_PINCONF_PARAM_DRIVE_DOWN_STRENGTH:
*bank = g->drv_bank;
diff --git a/drivers/pinctrl/pinctrl-tegra30.c b/drivers/pinctrl/pinctrl-tegra30.c
index 0386fdf..7894f14 100644
--- a/drivers/pinctrl/pinctrl-tegra30.c
+++ b/drivers/pinctrl/pinctrl-tegra30.c
@@ -3345,10 +3345,10 @@
FUNCTION(vi_alt3),
};
-#define MUXCTL_REG_A 0x3000
-#define PINGROUP_REG_A 0x868
+#define DRV_PINGROUP_REG_A 0x868 /* bank 0 */
+#define PINGROUP_REG_A 0x3000 /* bank 1 */
-#define PINGROUP_REG_Y(r) ((r) - MUXCTL_REG_A)
+#define PINGROUP_REG_Y(r) ((r) - PINGROUP_REG_A)
#define PINGROUP_REG_N(r) -1
#define PINGROUP(pg_name, f0, f1, f2, f3, f_safe, r, od, ior) \
@@ -3364,25 +3364,25 @@
}, \
.func_safe = TEGRA_MUX_ ## f_safe, \
.mux_reg = PINGROUP_REG_Y(r), \
- .mux_bank = 0, \
+ .mux_bank = 1, \
.mux_bit = 0, \
.pupd_reg = PINGROUP_REG_Y(r), \
- .pupd_bank = 0, \
+ .pupd_bank = 1, \
.pupd_bit = 2, \
.tri_reg = PINGROUP_REG_Y(r), \
- .tri_bank = 0, \
+ .tri_bank = 1, \
.tri_bit = 4, \
.einput_reg = PINGROUP_REG_Y(r), \
- .einput_bank = 0, \
+ .einput_bank = 1, \
.einput_bit = 5, \
.odrain_reg = PINGROUP_REG_##od(r), \
- .odrain_bank = 0, \
+ .odrain_bank = 1, \
.odrain_bit = 6, \
.lock_reg = PINGROUP_REG_Y(r), \
- .lock_bank = 0, \
+ .lock_bank = 1, \
.lock_bit = 7, \
.ioreset_reg = PINGROUP_REG_##ior(r), \
- .ioreset_bank = 0, \
+ .ioreset_bank = 1, \
.ioreset_bit = 8, \
.drv_reg = -1, \
}
@@ -3401,8 +3401,8 @@
.odrain_reg = -1, \
.lock_reg = -1, \
.ioreset_reg = -1, \
- .drv_reg = ((r) - PINGROUP_REG_A), \
- .drv_bank = 1, \
+ .drv_reg = ((r) - DRV_PINGROUP_REG_A), \
+ .drv_bank = 0, \
.hsm_bit = hsm_b, \
.schmitt_bit = schmitt_b, \
.lpmd_bit = lpmd_b, \
diff --git a/drivers/pinctrl/spear/pinctrl-spear.c b/drivers/pinctrl/spear/pinctrl-spear.c
index 5d4f44f..b1fd6ee 100644
--- a/drivers/pinctrl/spear/pinctrl-spear.c
+++ b/drivers/pinctrl/spear/pinctrl-spear.c
@@ -244,7 +244,7 @@
else
temp = ~muxreg->val;
- val |= temp;
+ val |= muxreg->mask & temp;
pmx_writel(pmx, val, muxreg->reg);
}
}
diff --git a/drivers/pinctrl/spear/pinctrl-spear1310.c b/drivers/pinctrl/spear/pinctrl-spear1310.c
index d6cca8c..0436fc7 100644
--- a/drivers/pinctrl/spear/pinctrl-spear1310.c
+++ b/drivers/pinctrl/spear/pinctrl-spear1310.c
@@ -25,8 +25,8 @@
};
/* registers */
-#define PERIP_CFG 0x32C
- #define MCIF_SEL_SHIFT 3
+#define PERIP_CFG 0x3B0
+ #define MCIF_SEL_SHIFT 5
#define MCIF_SEL_SD (0x1 << MCIF_SEL_SHIFT)
#define MCIF_SEL_CF (0x2 << MCIF_SEL_SHIFT)
#define MCIF_SEL_XD (0x3 << MCIF_SEL_SHIFT)
@@ -164,6 +164,10 @@
#define PMX_SSP0_CS0_MASK (1 << 29)
#define PMX_SSP0_CS1_2_MASK (1 << 30)
+#define PAD_DIRECTION_SEL_0 0x65C
+#define PAD_DIRECTION_SEL_1 0x660
+#define PAD_DIRECTION_SEL_2 0x664
+
/* combined macros */
#define PMX_GMII_MASK (PMX_GMIICLK_MASK | \
PMX_GMIICOL_CRS_XFERER_MIITXCLK_MASK | \
@@ -237,6 +241,10 @@
.reg = PAD_FUNCTION_EN_0,
.mask = PMX_I2C0_MASK,
.val = PMX_I2C0_MASK,
+ }, {
+ .reg = PAD_DIRECTION_SEL_0,
+ .mask = PMX_I2C0_MASK,
+ .val = PMX_I2C0_MASK,
},
};
@@ -269,6 +277,10 @@
.reg = PAD_FUNCTION_EN_0,
.mask = PMX_SSP0_MASK,
.val = PMX_SSP0_MASK,
+ }, {
+ .reg = PAD_DIRECTION_SEL_0,
+ .mask = PMX_SSP0_MASK,
+ .val = PMX_SSP0_MASK,
},
};
@@ -294,6 +306,10 @@
.reg = PAD_FUNCTION_EN_2,
.mask = PMX_SSP0_CS0_MASK,
.val = PMX_SSP0_CS0_MASK,
+ }, {
+ .reg = PAD_DIRECTION_SEL_2,
+ .mask = PMX_SSP0_CS0_MASK,
+ .val = PMX_SSP0_CS0_MASK,
},
};
@@ -319,6 +335,10 @@
.reg = PAD_FUNCTION_EN_2,
.mask = PMX_SSP0_CS1_2_MASK,
.val = PMX_SSP0_CS1_2_MASK,
+ }, {
+ .reg = PAD_DIRECTION_SEL_2,
+ .mask = PMX_SSP0_CS1_2_MASK,
+ .val = PMX_SSP0_CS1_2_MASK,
},
};
@@ -352,6 +372,10 @@
.reg = PAD_FUNCTION_EN_0,
.mask = PMX_I2S0_MASK,
.val = PMX_I2S0_MASK,
+ }, {
+ .reg = PAD_DIRECTION_SEL_0,
+ .mask = PMX_I2S0_MASK,
+ .val = PMX_I2S0_MASK,
},
};
@@ -384,6 +408,10 @@
.reg = PAD_FUNCTION_EN_1,
.mask = PMX_I2S1_MASK,
.val = PMX_I2S1_MASK,
+ }, {
+ .reg = PAD_DIRECTION_SEL_1,
+ .mask = PMX_I2S1_MASK,
+ .val = PMX_I2S1_MASK,
},
};
@@ -418,6 +446,10 @@
.reg = PAD_FUNCTION_EN_0,
.mask = PMX_CLCD1_MASK,
.val = PMX_CLCD1_MASK,
+ }, {
+ .reg = PAD_DIRECTION_SEL_0,
+ .mask = PMX_CLCD1_MASK,
+ .val = PMX_CLCD1_MASK,
},
};
@@ -443,6 +475,10 @@
.reg = PAD_FUNCTION_EN_1,
.mask = PMX_CLCD2_MASK,
.val = PMX_CLCD2_MASK,
+ }, {
+ .reg = PAD_DIRECTION_SEL_1,
+ .mask = PMX_CLCD2_MASK,
+ .val = PMX_CLCD2_MASK,
},
};
@@ -461,7 +497,7 @@
.nmodemuxs = ARRAY_SIZE(clcd_high_res_modemux),
};
-static const char *const clcd_grps[] = { "clcd_grp", "clcd_high_res" };
+static const char *const clcd_grps[] = { "clcd_grp", "clcd_high_res_grp" };
static struct spear_function clcd_function = {
.name = "clcd",
.groups = clcd_grps,
@@ -479,6 +515,14 @@
.reg = PAD_FUNCTION_EN_1,
.mask = PMX_EGPIO_1_GRP_MASK,
.val = PMX_EGPIO_1_GRP_MASK,
+ }, {
+ .reg = PAD_DIRECTION_SEL_0,
+ .mask = PMX_EGPIO_0_GRP_MASK,
+ .val = PMX_EGPIO_0_GRP_MASK,
+ }, {
+ .reg = PAD_DIRECTION_SEL_1,
+ .mask = PMX_EGPIO_1_GRP_MASK,
+ .val = PMX_EGPIO_1_GRP_MASK,
},
};
@@ -511,6 +555,10 @@
.reg = PAD_FUNCTION_EN_0,
.mask = PMX_SMI_MASK,
.val = PMX_SMI_MASK,
+ }, {
+ .reg = PAD_DIRECTION_SEL_0,
+ .mask = PMX_SMI_MASK,
+ .val = PMX_SMI_MASK,
},
};
@@ -539,6 +587,14 @@
.reg = PAD_FUNCTION_EN_1,
.mask = PMX_SMINCS2_MASK | PMX_SMINCS3_MASK,
.val = PMX_SMINCS2_MASK | PMX_SMINCS3_MASK,
+ }, {
+ .reg = PAD_DIRECTION_SEL_0,
+ .mask = PMX_SMI_MASK,
+ .val = PMX_SMI_MASK,
+ }, {
+ .reg = PAD_DIRECTION_SEL_1,
+ .mask = PMX_SMINCS2_MASK | PMX_SMINCS3_MASK,
+ .val = PMX_SMINCS2_MASK | PMX_SMINCS3_MASK,
},
};
@@ -573,6 +629,10 @@
.reg = PAD_FUNCTION_EN_0,
.mask = PMX_GMII_MASK,
.val = PMX_GMII_MASK,
+ }, {
+ .reg = PAD_DIRECTION_SEL_0,
+ .mask = PMX_GMII_MASK,
+ .val = PMX_GMII_MASK,
},
};
@@ -615,6 +675,18 @@
.reg = PAD_FUNCTION_EN_2,
.mask = PMX_RGMII_REG2_MASK,
.val = 0,
+ }, {
+ .reg = PAD_DIRECTION_SEL_0,
+ .mask = PMX_RGMII_REG0_MASK,
+ .val = PMX_RGMII_REG0_MASK,
+ }, {
+ .reg = PAD_DIRECTION_SEL_1,
+ .mask = PMX_RGMII_REG1_MASK,
+ .val = PMX_RGMII_REG1_MASK,
+ }, {
+ .reg = PAD_DIRECTION_SEL_2,
+ .mask = PMX_RGMII_REG2_MASK,
+ .val = PMX_RGMII_REG2_MASK,
},
};
@@ -649,6 +721,10 @@
.reg = PAD_FUNCTION_EN_1,
.mask = PMX_SMII_0_1_2_MASK,
.val = 0,
+ }, {
+ .reg = PAD_DIRECTION_SEL_1,
+ .mask = PMX_SMII_0_1_2_MASK,
+ .val = PMX_SMII_0_1_2_MASK,
},
};
@@ -681,6 +757,10 @@
.reg = PAD_FUNCTION_EN_1,
.mask = PMX_NFCE2_MASK,
.val = 0,
+ }, {
+ .reg = PAD_DIRECTION_SEL_1,
+ .mask = PMX_NFCE2_MASK,
+ .val = PMX_NFCE2_MASK,
},
};
@@ -721,6 +801,14 @@
.reg = PAD_FUNCTION_EN_1,
.mask = PMX_NAND8BIT_1_MASK,
.val = PMX_NAND8BIT_1_MASK,
+ }, {
+ .reg = PAD_DIRECTION_SEL_0,
+ .mask = PMX_NAND8BIT_0_MASK,
+ .val = PMX_NAND8BIT_0_MASK,
+ }, {
+ .reg = PAD_DIRECTION_SEL_1,
+ .mask = PMX_NAND8BIT_1_MASK,
+ .val = PMX_NAND8BIT_1_MASK,
},
};
@@ -747,6 +835,10 @@
.reg = PAD_FUNCTION_EN_1,
.mask = PMX_NAND16BIT_1_MASK,
.val = PMX_NAND16BIT_1_MASK,
+ }, {
+ .reg = PAD_DIRECTION_SEL_1,
+ .mask = PMX_NAND16BIT_1_MASK,
+ .val = PMX_NAND16BIT_1_MASK,
},
};
@@ -772,6 +864,10 @@
.reg = PAD_FUNCTION_EN_1,
.mask = PMX_NAND_4CHIPS_MASK,
.val = PMX_NAND_4CHIPS_MASK,
+ }, {
+ .reg = PAD_DIRECTION_SEL_1,
+ .mask = PMX_NAND_4CHIPS_MASK,
+ .val = PMX_NAND_4CHIPS_MASK,
},
};
@@ -833,6 +929,10 @@
.reg = PAD_FUNCTION_EN_1,
.mask = PMX_KBD_ROWCOL68_MASK,
.val = PMX_KBD_ROWCOL68_MASK,
+ }, {
+ .reg = PAD_DIRECTION_SEL_1,
+ .mask = PMX_KBD_ROWCOL68_MASK,
+ .val = PMX_KBD_ROWCOL68_MASK,
},
};
@@ -866,6 +966,10 @@
.reg = PAD_FUNCTION_EN_0,
.mask = PMX_UART0_MASK,
.val = PMX_UART0_MASK,
+ }, {
+ .reg = PAD_DIRECTION_SEL_0,
+ .mask = PMX_UART0_MASK,
+ .val = PMX_UART0_MASK,
},
};
@@ -891,6 +995,10 @@
.reg = PAD_FUNCTION_EN_1,
.mask = PMX_UART0_MODEM_MASK,
.val = PMX_UART0_MODEM_MASK,
+ }, {
+ .reg = PAD_DIRECTION_SEL_1,
+ .mask = PMX_UART0_MODEM_MASK,
+ .val = PMX_UART0_MODEM_MASK,
},
};
@@ -923,6 +1031,10 @@
.reg = PAD_FUNCTION_EN_1,
.mask = PMX_GPT0_TMR0_MASK,
.val = PMX_GPT0_TMR0_MASK,
+ }, {
+ .reg = PAD_DIRECTION_SEL_1,
+ .mask = PMX_GPT0_TMR0_MASK,
+ .val = PMX_GPT0_TMR0_MASK,
},
};
@@ -948,6 +1060,10 @@
.reg = PAD_FUNCTION_EN_1,
.mask = PMX_GPT0_TMR1_MASK,
.val = PMX_GPT0_TMR1_MASK,
+ }, {
+ .reg = PAD_DIRECTION_SEL_1,
+ .mask = PMX_GPT0_TMR1_MASK,
+ .val = PMX_GPT0_TMR1_MASK,
},
};
@@ -980,6 +1096,10 @@
.reg = PAD_FUNCTION_EN_1,
.mask = PMX_GPT1_TMR0_MASK,
.val = PMX_GPT1_TMR0_MASK,
+ }, {
+ .reg = PAD_DIRECTION_SEL_1,
+ .mask = PMX_GPT1_TMR0_MASK,
+ .val = PMX_GPT1_TMR0_MASK,
},
};
@@ -1005,6 +1125,10 @@
.reg = PAD_FUNCTION_EN_1,
.mask = PMX_GPT1_TMR1_MASK,
.val = PMX_GPT1_TMR1_MASK,
+ }, {
+ .reg = PAD_DIRECTION_SEL_1,
+ .mask = PMX_GPT1_TMR1_MASK,
+ .val = PMX_GPT1_TMR1_MASK,
},
};
@@ -1049,6 +1173,20 @@
.reg = PAD_FUNCTION_EN_2, \
.mask = PMX_MCIFALL_2_MASK, \
.val = PMX_MCIFALL_2_MASK, \
+ }, { \
+ .reg = PAD_DIRECTION_SEL_0, \
+ .mask = PMX_MCI_DATA8_15_MASK, \
+ .val = PMX_MCI_DATA8_15_MASK, \
+ }, { \
+ .reg = PAD_DIRECTION_SEL_1, \
+ .mask = PMX_MCIFALL_1_MASK | PMX_NFWPRT1_MASK | \
+ PMX_NFWPRT2_MASK, \
+ .val = PMX_MCIFALL_1_MASK | PMX_NFWPRT1_MASK | \
+ PMX_NFWPRT2_MASK, \
+ }, { \
+ .reg = PAD_DIRECTION_SEL_2, \
+ .mask = PMX_MCIFALL_2_MASK, \
+ .val = PMX_MCIFALL_2_MASK, \
}
/* sdhci device */
@@ -1154,6 +1292,10 @@
.reg = PAD_FUNCTION_EN_2,
.mask = PMX_TOUCH_XY_MASK,
.val = PMX_TOUCH_XY_MASK,
+ }, {
+ .reg = PAD_DIRECTION_SEL_2,
+ .mask = PMX_TOUCH_XY_MASK,
+ .val = PMX_TOUCH_XY_MASK,
},
};
@@ -1187,6 +1329,10 @@
.reg = PAD_FUNCTION_EN_0,
.mask = PMX_I2C0_MASK,
.val = 0,
+ }, {
+ .reg = PAD_DIRECTION_SEL_0,
+ .mask = PMX_I2C0_MASK,
+ .val = PMX_I2C0_MASK,
},
};
@@ -1213,6 +1359,12 @@
.mask = PMX_MCIDATA1_MASK |
PMX_MCIDATA2_MASK,
.val = 0,
+ }, {
+ .reg = PAD_DIRECTION_SEL_1,
+ .mask = PMX_MCIDATA1_MASK |
+ PMX_MCIDATA2_MASK,
+ .val = PMX_MCIDATA1_MASK |
+ PMX_MCIDATA2_MASK,
},
};
@@ -1246,6 +1398,10 @@
.reg = PAD_FUNCTION_EN_0,
.mask = PMX_I2S0_MASK,
.val = 0,
+ }, {
+ .reg = PAD_DIRECTION_SEL_0,
+ .mask = PMX_I2S0_MASK,
+ .val = PMX_I2S0_MASK,
},
};
@@ -1278,6 +1434,10 @@
.reg = PAD_FUNCTION_EN_0,
.mask = PMX_I2S0_MASK | PMX_CLCD1_MASK,
.val = 0,
+ }, {
+ .reg = PAD_DIRECTION_SEL_0,
+ .mask = PMX_I2S0_MASK | PMX_CLCD1_MASK,
+ .val = PMX_I2S0_MASK | PMX_CLCD1_MASK,
},
};
@@ -1310,6 +1470,10 @@
.reg = PAD_FUNCTION_EN_0,
.mask = PMX_CLCD1_MASK,
.val = 0,
+ }, {
+ .reg = PAD_DIRECTION_SEL_0,
+ .mask = PMX_CLCD1_MASK,
+ .val = PMX_CLCD1_MASK,
},
};
@@ -1344,6 +1508,10 @@
.reg = PAD_FUNCTION_EN_0,
.mask = PMX_CLCD1_MASK,
.val = 0,
+ }, {
+ .reg = PAD_DIRECTION_SEL_0,
+ .mask = PMX_CLCD1_MASK,
+ .val = PMX_CLCD1_MASK,
},
};
@@ -1376,6 +1544,10 @@
.reg = PAD_FUNCTION_EN_0,
.mask = PMX_CLCD1_MASK,
.val = 0,
+ }, {
+ .reg = PAD_DIRECTION_SEL_0,
+ .mask = PMX_CLCD1_MASK,
+ .val = PMX_CLCD1_MASK,
},
};
@@ -1409,6 +1581,10 @@
.reg = PAD_FUNCTION_EN_0,
.mask = PMX_CLCD1_MASK | PMX_SMI_MASK,
.val = 0,
+ }, {
+ .reg = PAD_DIRECTION_SEL_0,
+ .mask = PMX_CLCD1_MASK | PMX_SMI_MASK,
+ .val = PMX_CLCD1_MASK | PMX_SMI_MASK,
},
};
@@ -1435,6 +1611,10 @@
.reg = PAD_FUNCTION_EN_1,
.mask = PMX_I2S1_MASK | PMX_MCIDATA3_MASK,
.val = 0,
+ }, {
+ .reg = PAD_DIRECTION_SEL_1,
+ .mask = PMX_I2S1_MASK | PMX_MCIDATA3_MASK,
+ .val = PMX_I2S1_MASK | PMX_MCIDATA3_MASK,
},
};
@@ -1469,6 +1649,10 @@
.reg = PAD_FUNCTION_EN_0,
.mask = PMX_SMI_MASK,
.val = 0,
+ }, {
+ .reg = PAD_DIRECTION_SEL_0,
+ .mask = PMX_SMI_MASK,
+ .val = PMX_SMI_MASK,
},
};
@@ -1499,6 +1683,14 @@
.reg = PAD_FUNCTION_EN_2,
.mask = PMX_MCIDATA5_MASK,
.val = 0,
+ }, {
+ .reg = PAD_DIRECTION_SEL_1,
+ .mask = PMX_MCIDATA4_MASK,
+ .val = PMX_MCIDATA4_MASK,
+ }, {
+ .reg = PAD_DIRECTION_SEL_2,
+ .mask = PMX_MCIDATA5_MASK,
+ .val = PMX_MCIDATA5_MASK,
},
};
@@ -1526,6 +1718,12 @@
.mask = PMX_MCIDATA6_MASK |
PMX_MCIDATA7_MASK,
.val = 0,
+ }, {
+ .reg = PAD_DIRECTION_SEL_2,
+ .mask = PMX_MCIDATA6_MASK |
+ PMX_MCIDATA7_MASK,
+ .val = PMX_MCIDATA6_MASK |
+ PMX_MCIDATA7_MASK,
},
};
@@ -1560,6 +1758,10 @@
.reg = PAD_FUNCTION_EN_1,
.mask = PMX_KBD_ROWCOL25_MASK,
.val = 0,
+ }, {
+ .reg = PAD_DIRECTION_SEL_1,
+ .mask = PMX_KBD_ROWCOL25_MASK,
+ .val = PMX_KBD_ROWCOL25_MASK,
},
};
@@ -1587,6 +1789,12 @@
.mask = PMX_MCIIORDRE_MASK |
PMX_MCIIOWRWE_MASK,
.val = 0,
+ }, {
+ .reg = PAD_DIRECTION_SEL_2,
+ .mask = PMX_MCIIORDRE_MASK |
+ PMX_MCIIOWRWE_MASK,
+ .val = PMX_MCIIORDRE_MASK |
+ PMX_MCIIOWRWE_MASK,
},
};
@@ -1613,6 +1821,12 @@
.mask = PMX_MCIRESETCF_MASK |
PMX_MCICS0CE_MASK,
.val = 0,
+ }, {
+ .reg = PAD_DIRECTION_SEL_2,
+ .mask = PMX_MCIRESETCF_MASK |
+ PMX_MCICS0CE_MASK,
+ .val = PMX_MCIRESETCF_MASK |
+ PMX_MCICS0CE_MASK,
},
};
@@ -1651,6 +1865,14 @@
.reg = PAD_FUNCTION_EN_1,
.mask = PMX_NFRSTPWDWN3_MASK,
.val = 0,
+ }, {
+ .reg = PAD_DIRECTION_SEL_0,
+ .mask = PMX_NFRSTPWDWN2_MASK,
+ .val = PMX_NFRSTPWDWN2_MASK,
+ }, {
+ .reg = PAD_DIRECTION_SEL_1,
+ .mask = PMX_NFRSTPWDWN3_MASK,
+ .val = PMX_NFRSTPWDWN3_MASK,
},
};
@@ -1677,6 +1899,10 @@
.reg = PAD_FUNCTION_EN_2,
.mask = PMX_MCICFINTR_MASK | PMX_MCIIORDY_MASK,
.val = 0,
+ }, {
+ .reg = PAD_DIRECTION_SEL_2,
+ .mask = PMX_MCICFINTR_MASK | PMX_MCIIORDY_MASK,
+ .val = PMX_MCICFINTR_MASK | PMX_MCIIORDY_MASK,
},
};
@@ -1711,6 +1937,10 @@
.reg = PAD_FUNCTION_EN_2,
.mask = PMX_MCICS1_MASK | PMX_MCIDMAACK_MASK,
.val = 0,
+ }, {
+ .reg = PAD_DIRECTION_SEL_2,
+ .mask = PMX_MCICS1_MASK | PMX_MCIDMAACK_MASK,
+ .val = PMX_MCICS1_MASK | PMX_MCIDMAACK_MASK,
},
};
@@ -1737,6 +1967,10 @@
.reg = PAD_FUNCTION_EN_1,
.mask = PMX_KBD_ROWCOL25_MASK,
.val = 0,
+ }, {
+ .reg = PAD_DIRECTION_SEL_1,
+ .mask = PMX_KBD_ROWCOL25_MASK,
+ .val = PMX_KBD_ROWCOL25_MASK,
},
};
@@ -1763,29 +1997,64 @@
.ngroups = ARRAY_SIZE(can1_grps),
};
-/* Pad multiplexing for pci device */
-static const unsigned pci_sata_pins[] = { 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 18,
+/* Pad multiplexing for (ras-ip) pci device */
+static const unsigned pci_pins[] = { 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 18,
19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36,
37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54,
55, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99 };
-#define PCI_SATA_MUXREG \
- { \
- .reg = PAD_FUNCTION_EN_0, \
- .mask = PMX_MCI_DATA8_15_MASK, \
- .val = 0, \
- }, { \
- .reg = PAD_FUNCTION_EN_1, \
- .mask = PMX_PCI_REG1_MASK, \
- .val = 0, \
- }, { \
- .reg = PAD_FUNCTION_EN_2, \
- .mask = PMX_PCI_REG2_MASK, \
- .val = 0, \
- }
-/* pad multiplexing for pcie0 device */
+static struct spear_muxreg pci_muxreg[] = {
+ {
+ .reg = PAD_FUNCTION_EN_0,
+ .mask = PMX_MCI_DATA8_15_MASK,
+ .val = 0,
+ }, {
+ .reg = PAD_FUNCTION_EN_1,
+ .mask = PMX_PCI_REG1_MASK,
+ .val = 0,
+ }, {
+ .reg = PAD_FUNCTION_EN_2,
+ .mask = PMX_PCI_REG2_MASK,
+ .val = 0,
+ }, {
+ .reg = PAD_DIRECTION_SEL_0,
+ .mask = PMX_MCI_DATA8_15_MASK,
+ .val = PMX_MCI_DATA8_15_MASK,
+ }, {
+ .reg = PAD_DIRECTION_SEL_1,
+ .mask = PMX_PCI_REG1_MASK,
+ .val = PMX_PCI_REG1_MASK,
+ }, {
+ .reg = PAD_DIRECTION_SEL_2,
+ .mask = PMX_PCI_REG2_MASK,
+ .val = PMX_PCI_REG2_MASK,
+ },
+};
+
+static struct spear_modemux pci_modemux[] = {
+ {
+ .muxregs = pci_muxreg,
+ .nmuxregs = ARRAY_SIZE(pci_muxreg),
+ },
+};
+
+static struct spear_pingroup pci_pingroup = {
+ .name = "pci_grp",
+ .pins = pci_pins,
+ .npins = ARRAY_SIZE(pci_pins),
+ .modemuxs = pci_modemux,
+ .nmodemuxs = ARRAY_SIZE(pci_modemux),
+};
+
+static const char *const pci_grps[] = { "pci_grp" };
+static struct spear_function pci_function = {
+ .name = "pci",
+ .groups = pci_grps,
+ .ngroups = ARRAY_SIZE(pci_grps),
+};
+
+/* pad multiplexing for (fix-part) pcie0 device */
static struct spear_muxreg pcie0_muxreg[] = {
- PCI_SATA_MUXREG,
{
.reg = PCIE_SATA_CFG,
.mask = PCIE_CFG_VAL(0),
@@ -1802,15 +2071,12 @@
static struct spear_pingroup pcie0_pingroup = {
.name = "pcie0_grp",
- .pins = pci_sata_pins,
- .npins = ARRAY_SIZE(pci_sata_pins),
.modemuxs = pcie0_modemux,
.nmodemuxs = ARRAY_SIZE(pcie0_modemux),
};
-/* pad multiplexing for pcie1 device */
+/* pad multiplexing for (fix-part) pcie1 device */
static struct spear_muxreg pcie1_muxreg[] = {
- PCI_SATA_MUXREG,
{
.reg = PCIE_SATA_CFG,
.mask = PCIE_CFG_VAL(1),
@@ -1827,15 +2093,12 @@
static struct spear_pingroup pcie1_pingroup = {
.name = "pcie1_grp",
- .pins = pci_sata_pins,
- .npins = ARRAY_SIZE(pci_sata_pins),
.modemuxs = pcie1_modemux,
.nmodemuxs = ARRAY_SIZE(pcie1_modemux),
};
-/* pad multiplexing for pcie2 device */
+/* pad multiplexing for (fix-part) pcie2 device */
static struct spear_muxreg pcie2_muxreg[] = {
- PCI_SATA_MUXREG,
{
.reg = PCIE_SATA_CFG,
.mask = PCIE_CFG_VAL(2),
@@ -1852,22 +2115,20 @@
static struct spear_pingroup pcie2_pingroup = {
.name = "pcie2_grp",
- .pins = pci_sata_pins,
- .npins = ARRAY_SIZE(pci_sata_pins),
.modemuxs = pcie2_modemux,
.nmodemuxs = ARRAY_SIZE(pcie2_modemux),
};
-static const char *const pci_grps[] = { "pcie0_grp", "pcie1_grp", "pcie2_grp" };
-static struct spear_function pci_function = {
- .name = "pci",
- .groups = pci_grps,
- .ngroups = ARRAY_SIZE(pci_grps),
+static const char *const pcie_grps[] = { "pcie0_grp", "pcie1_grp", "pcie2_grp"
+};
+static struct spear_function pcie_function = {
+ .name = "pci_express",
+ .groups = pcie_grps,
+ .ngroups = ARRAY_SIZE(pcie_grps),
};
/* pad multiplexing for sata0 device */
static struct spear_muxreg sata0_muxreg[] = {
- PCI_SATA_MUXREG,
{
.reg = PCIE_SATA_CFG,
.mask = SATA_CFG_VAL(0),
@@ -1884,15 +2145,12 @@
static struct spear_pingroup sata0_pingroup = {
.name = "sata0_grp",
- .pins = pci_sata_pins,
- .npins = ARRAY_SIZE(pci_sata_pins),
.modemuxs = sata0_modemux,
.nmodemuxs = ARRAY_SIZE(sata0_modemux),
};
/* pad multiplexing for sata1 device */
static struct spear_muxreg sata1_muxreg[] = {
- PCI_SATA_MUXREG,
{
.reg = PCIE_SATA_CFG,
.mask = SATA_CFG_VAL(1),
@@ -1909,15 +2167,12 @@
static struct spear_pingroup sata1_pingroup = {
.name = "sata1_grp",
- .pins = pci_sata_pins,
- .npins = ARRAY_SIZE(pci_sata_pins),
.modemuxs = sata1_modemux,
.nmodemuxs = ARRAY_SIZE(sata1_modemux),
};
/* pad multiplexing for sata2 device */
static struct spear_muxreg sata2_muxreg[] = {
- PCI_SATA_MUXREG,
{
.reg = PCIE_SATA_CFG,
.mask = SATA_CFG_VAL(2),
@@ -1934,8 +2189,6 @@
static struct spear_pingroup sata2_pingroup = {
.name = "sata2_grp",
- .pins = pci_sata_pins,
- .npins = ARRAY_SIZE(pci_sata_pins),
.modemuxs = sata2_modemux,
.nmodemuxs = ARRAY_SIZE(sata2_modemux),
};
@@ -1957,6 +2210,14 @@
PMX_KBD_COL0_MASK | PMX_NFIO8_15_MASK | PMX_NFCE1_MASK |
PMX_NFCE2_MASK,
.val = 0,
+ }, {
+ .reg = PAD_DIRECTION_SEL_1,
+ .mask = PMX_KBD_ROWCOL25_MASK | PMX_KBD_COL1_MASK |
+ PMX_KBD_COL0_MASK | PMX_NFIO8_15_MASK | PMX_NFCE1_MASK |
+ PMX_NFCE2_MASK,
+ .val = PMX_KBD_ROWCOL25_MASK | PMX_KBD_COL1_MASK |
+ PMX_KBD_COL0_MASK | PMX_NFIO8_15_MASK | PMX_NFCE1_MASK |
+ PMX_NFCE2_MASK,
},
};
@@ -1983,6 +2244,12 @@
.mask = PMX_MCIADDR0ALE_MASK | PMX_MCIADDR2_MASK |
PMX_MCICECF_MASK | PMX_MCICEXD_MASK,
.val = 0,
+ }, {
+ .reg = PAD_DIRECTION_SEL_2,
+ .mask = PMX_MCIADDR0ALE_MASK | PMX_MCIADDR2_MASK |
+ PMX_MCICECF_MASK | PMX_MCICEXD_MASK,
+ .val = PMX_MCIADDR0ALE_MASK | PMX_MCIADDR2_MASK |
+ PMX_MCICECF_MASK | PMX_MCICEXD_MASK,
},
};
@@ -2017,6 +2284,12 @@
.mask = PMX_MCICDCF1_MASK | PMX_MCICDCF2_MASK | PMX_MCICDXD_MASK
| PMX_MCILEDS_MASK,
.val = 0,
+ }, {
+ .reg = PAD_DIRECTION_SEL_2,
+ .mask = PMX_MCICDCF1_MASK | PMX_MCICDCF2_MASK | PMX_MCICDXD_MASK
+ | PMX_MCILEDS_MASK,
+ .val = PMX_MCICDCF1_MASK | PMX_MCICDCF2_MASK | PMX_MCICDXD_MASK
+ | PMX_MCILEDS_MASK,
},
};
@@ -2093,6 +2366,7 @@
&can0_dis_sd_pingroup,
&can1_dis_sd_pingroup,
&can1_dis_kbd_pingroup,
+ &pci_pingroup,
&pcie0_pingroup,
&pcie1_pingroup,
&pcie2_pingroup,
@@ -2138,6 +2412,7 @@
&can0_function,
&can1_function,
&pci_function,
+ &pcie_function,
&sata_function,
&ssp1_function,
&gpt64_function,
diff --git a/drivers/pinctrl/spear/pinctrl-spear1340.c b/drivers/pinctrl/spear/pinctrl-spear1340.c
index a0eb057..0606b8c 100644
--- a/drivers/pinctrl/spear/pinctrl-spear1340.c
+++ b/drivers/pinctrl/spear/pinctrl-spear1340.c
@@ -213,7 +213,7 @@
* Pad multiplexing for making all pads as gpio's. This is done to override the
* values passed from bootloader and start from scratch.
*/
-static const unsigned pads_as_gpio_pins[] = { 251 };
+static const unsigned pads_as_gpio_pins[] = { 12, 88, 89, 251 };
static struct spear_muxreg pads_as_gpio_muxreg[] = {
{
.reg = PAD_FUNCTION_EN_1,
@@ -1692,7 +1692,43 @@
.nmodemuxs = ARRAY_SIZE(clcd_modemux),
};
-static const char *const clcd_grps[] = { "clcd_grp" };
+/* Disable cld runtime to save panel damage */
+static struct spear_muxreg clcd_sleep_muxreg[] = {
+ {
+ .reg = PAD_SHARED_IP_EN_1,
+ .mask = ARM_TRACE_MASK | MIPHY_DBG_MASK,
+ .val = 0,
+ }, {
+ .reg = PAD_FUNCTION_EN_5,
+ .mask = CLCD_REG4_MASK | CLCD_AND_ARM_TRACE_REG4_MASK,
+ .val = 0x0,
+ }, {
+ .reg = PAD_FUNCTION_EN_6,
+ .mask = CLCD_AND_ARM_TRACE_REG5_MASK,
+ .val = 0x0,
+ }, {
+ .reg = PAD_FUNCTION_EN_7,
+ .mask = CLCD_AND_ARM_TRACE_REG6_MASK,
+ .val = 0x0,
+ },
+};
+
+static struct spear_modemux clcd_sleep_modemux[] = {
+ {
+ .muxregs = clcd_sleep_muxreg,
+ .nmuxregs = ARRAY_SIZE(clcd_sleep_muxreg),
+ },
+};
+
+static struct spear_pingroup clcd_sleep_pingroup = {
+ .name = "clcd_sleep_grp",
+ .pins = clcd_pins,
+ .npins = ARRAY_SIZE(clcd_pins),
+ .modemuxs = clcd_sleep_modemux,
+ .nmodemuxs = ARRAY_SIZE(clcd_sleep_modemux),
+};
+
+static const char *const clcd_grps[] = { "clcd_grp", "clcd_sleep_grp" };
static struct spear_function clcd_function = {
.name = "clcd",
.groups = clcd_grps,
@@ -1893,6 +1929,7 @@
&sdhci_pingroup,
&cf_pingroup,
&xd_pingroup,
+ &clcd_sleep_pingroup,
&clcd_pingroup,
&arm_trace_pingroup,
&miphy_dbg_pingroup,
diff --git a/drivers/pinctrl/spear/pinctrl-spear320.c b/drivers/pinctrl/spear/pinctrl-spear320.c
index 020b1e0..ca47b0e 100644
--- a/drivers/pinctrl/spear/pinctrl-spear320.c
+++ b/drivers/pinctrl/spear/pinctrl-spear320.c
@@ -2240,6 +2240,10 @@
.mask = PMX_SSP_CS_MASK,
.val = 0,
}, {
+ .reg = MODE_CONFIG_REG,
+ .mask = PMX_PWM_MASK,
+ .val = PMX_PWM_MASK,
+ }, {
.reg = IP_SEL_PAD_30_39_REG,
.mask = PMX_PL_34_MASK,
.val = PMX_PWM2_PL_34_VAL,
@@ -2956,9 +2960,9 @@
};
/* Pad multiplexing for cadence mii 1_2 as smii or rmii device */
-static const unsigned smii0_1_pins[] = { 10, 11, 13, 14, 15, 16, 17, 18, 19, 20,
+static const unsigned rmii0_1_pins[] = { 10, 11, 13, 14, 15, 16, 17, 18, 19, 20,
21, 22, 23, 24, 25, 26, 27 };
-static const unsigned rmii0_1_pins[] = { 10, 11, 21, 22, 23, 24, 25, 26, 27 };
+static const unsigned smii0_1_pins[] = { 10, 11, 21, 22, 23, 24, 25, 26, 27 };
static struct spear_muxreg mii0_1_muxreg[] = {
{
.reg = PMX_CONFIG_REG,
diff --git a/drivers/pinctrl/spear/pinctrl-spear3xx.h b/drivers/pinctrl/spear/pinctrl-spear3xx.h
index 31f4434..7860b36 100644
--- a/drivers/pinctrl/spear/pinctrl-spear3xx.h
+++ b/drivers/pinctrl/spear/pinctrl-spear3xx.h
@@ -15,6 +15,7 @@
#include "pinctrl-spear.h"
/* pad mux declarations */
+#define PMX_PWM_MASK (1 << 16)
#define PMX_FIRDA_MASK (1 << 14)
#define PMX_I2C_MASK (1 << 13)
#define PMX_SSP_CS_MASK (1 << 12)
diff --git a/drivers/rapidio/rio.c b/drivers/rapidio/rio.c
index c17ae22..0c6fcb4 100644
--- a/drivers/rapidio/rio.c
+++ b/drivers/rapidio/rio.c
@@ -401,7 +401,7 @@
/**
* rio_map_inb_region -- Map inbound memory region.
* @mport: Master port.
- * @lstart: physical address of memory region to be mapped
+ * @local: physical address of memory region to be mapped
* @rbase: RIO base address assigned to this window
* @size: Size of the memory region
* @rflags: Flags for mapping.
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 5c4829c..e872c8b 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -1381,22 +1381,14 @@
}
EXPORT_SYMBOL_GPL(regulator_get_exclusive);
-/**
- * regulator_put - "free" the regulator source
- * @regulator: regulator source
- *
- * Note: drivers must ensure that all regulator_enable calls made on this
- * regulator source are balanced by regulator_disable calls prior to calling
- * this function.
- */
-void regulator_put(struct regulator *regulator)
+/* Locks held by regulator_put() */
+static void _regulator_put(struct regulator *regulator)
{
struct regulator_dev *rdev;
if (regulator == NULL || IS_ERR(regulator))
return;
- mutex_lock(®ulator_list_mutex);
rdev = regulator->rdev;
debugfs_remove_recursive(regulator->debugfs);
@@ -1412,6 +1404,20 @@
rdev->exclusive = 0;
module_put(rdev->owner);
+}
+
+/**
+ * regulator_put - "free" the regulator source
+ * @regulator: regulator source
+ *
+ * Note: drivers must ensure that all regulator_enable calls made on this
+ * regulator source are balanced by regulator_disable calls prior to calling
+ * this function.
+ */
+void regulator_put(struct regulator *regulator)
+{
+ mutex_lock(®ulator_list_mutex);
+ _regulator_put(regulator);
mutex_unlock(®ulator_list_mutex);
}
EXPORT_SYMBOL_GPL(regulator_put);
@@ -1974,7 +1980,7 @@
if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_VOLTAGE)) {
ret = regulator_get_voltage(regulator);
if (ret >= 0)
- return (min_uV >= ret && ret <= max_uV);
+ return (min_uV <= ret && ret <= max_uV);
else
return ret;
}
@@ -3365,7 +3371,7 @@
if (ret != 0) {
rdev_err(rdev, "Failed to request enable GPIO%d: %d\n",
config->ena_gpio, ret);
- goto clean;
+ goto wash;
}
rdev->ena_gpio = config->ena_gpio;
@@ -3445,10 +3451,11 @@
scrub:
if (rdev->supply)
- regulator_put(rdev->supply);
+ _regulator_put(rdev->supply);
if (rdev->ena_gpio)
gpio_free(rdev->ena_gpio);
kfree(rdev->constraints);
+wash:
device_unregister(&rdev->dev);
/* device core frees rdev */
rdev = ERR_PTR(ret);
diff --git a/drivers/rtc/rtc-imxdi.c b/drivers/rtc/rtc-imxdi.c
index 891cd6c..4eed510 100644
--- a/drivers/rtc/rtc-imxdi.c
+++ b/drivers/rtc/rtc-imxdi.c
@@ -392,6 +392,8 @@
if (imxdi->ioaddr == NULL)
return -ENOMEM;
+ spin_lock_init(&imxdi->irq_lock);
+
imxdi->irq = platform_get_irq(pdev, 0);
if (imxdi->irq < 0)
return imxdi->irq;
diff --git a/drivers/rtc/rtc-mxc.c b/drivers/rtc/rtc-mxc.c
index cd01062..7304139 100644
--- a/drivers/rtc/rtc-mxc.c
+++ b/drivers/rtc/rtc-mxc.c
@@ -17,8 +17,6 @@
#include <linux/platform_device.h>
#include <linux/clk.h>
-#include <mach/hardware.h>
-
#define RTC_INPUT_CLK_32768HZ (0x00 << 5)
#define RTC_INPUT_CLK_32000HZ (0x01 << 5)
#define RTC_INPUT_CLK_38400HZ (0x02 << 5)
@@ -72,14 +70,38 @@
#define RTC_TEST2 0x2C /* 32bit rtc test reg 2 */
#define RTC_TEST3 0x30 /* 32bit rtc test reg 3 */
+enum imx_rtc_type {
+ IMX1_RTC,
+ IMX21_RTC,
+};
+
struct rtc_plat_data {
struct rtc_device *rtc;
void __iomem *ioaddr;
int irq;
struct clk *clk;
struct rtc_time g_rtc_alarm;
+ enum imx_rtc_type devtype;
};
+static struct platform_device_id imx_rtc_devtype[] = {
+ {
+ .name = "imx1-rtc",
+ .driver_data = IMX1_RTC,
+ }, {
+ .name = "imx21-rtc",
+ .driver_data = IMX21_RTC,
+ }, {
+ /* sentinel */
+ }
+};
+MODULE_DEVICE_TABLE(platform, imx_rtc_devtype);
+
+static inline int is_imx1_rtc(struct rtc_plat_data *data)
+{
+ return data->devtype == IMX1_RTC;
+}
+
/*
* This function is used to obtain the RTC time or the alarm value in
* second.
@@ -278,10 +300,13 @@
*/
static int mxc_rtc_set_mmss(struct device *dev, unsigned long time)
{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
+
/*
* TTC_DAYR register is 9-bit in MX1 SoC, save time and day of year only
*/
- if (cpu_is_mx1()) {
+ if (is_imx1_rtc(pdata)) {
struct rtc_time tm;
rtc_time_to_tm(time, &tm);
@@ -360,6 +385,8 @@
if (!pdata)
return -ENOMEM;
+ pdata->devtype = pdev->id_entry->driver_data;
+
if (!devm_request_mem_region(&pdev->dev, res->start,
resource_size(res), pdev->name))
return -EBUSY;
@@ -480,6 +507,7 @@
#endif
.owner = THIS_MODULE,
},
+ .id_table = imx_rtc_devtype,
.probe = mxc_rtc_probe,
.remove = __devexit_p(mxc_rtc_remove),
};
diff --git a/drivers/s390/char/con3215.c b/drivers/s390/char/con3215.c
index 9ffb6d5..4ed343e 100644
--- a/drivers/s390/char/con3215.c
+++ b/drivers/s390/char/con3215.c
@@ -44,7 +44,6 @@
#define RAW3215_NR_CCWS 3
#define RAW3215_TIMEOUT HZ/10 /* time for delayed output */
-#define RAW3215_FIXED 1 /* 3215 console device is not be freed */
#define RAW3215_WORKING 4 /* set if a request is being worked on */
#define RAW3215_THROTTLED 8 /* set if reading is disabled */
#define RAW3215_STOPPED 16 /* set if writing is disabled */
@@ -339,8 +338,10 @@
struct tty_struct *tty;
tty = tty_port_tty_get(&raw->port);
- tty_wakeup(tty);
- tty_kref_put(tty);
+ if (tty) {
+ tty_wakeup(tty);
+ tty_kref_put(tty);
+ }
}
/*
@@ -629,8 +630,7 @@
DECLARE_WAITQUEUE(wait, current);
unsigned long flags;
- if (!(raw->port.flags & ASYNC_INITIALIZED) ||
- (raw->flags & RAW3215_FIXED))
+ if (!(raw->port.flags & ASYNC_INITIALIZED))
return;
/* Wait for outstanding requests, then free irq */
spin_lock_irqsave(get_ccwdev_lock(raw->cdev), flags);
@@ -926,8 +926,6 @@
dev_set_drvdata(&cdev->dev, raw);
cdev->handler = raw3215_irq;
- raw->flags |= RAW3215_FIXED;
-
/* Request the console irq */
if (raw3215_startup(raw) != 0) {
raw3215_free_info(raw);
diff --git a/drivers/s390/cio/css.c b/drivers/s390/cio/css.c
index b4d572f..fd00afd 100644
--- a/drivers/s390/cio/css.c
+++ b/drivers/s390/cio/css.c
@@ -377,7 +377,11 @@
/* Will be done on the slow path. */
return -EAGAIN;
}
- if (stsch_err(schid, &schib) || !css_sch_is_valid(&schib)) {
+ if (stsch_err(schid, &schib)) {
+ /* Subchannel is not provided. */
+ return -ENXIO;
+ }
+ if (!css_sch_is_valid(&schib)) {
/* Unusable - ignore. */
return 0;
}
@@ -536,6 +540,7 @@
case -ENOMEM:
case -EIO:
/* These should abort looping */
+ idset_sch_del_subseq(slow_subchannel_set, schid);
break;
default:
rc = 0;
diff --git a/drivers/s390/cio/css.h b/drivers/s390/cio/css.h
index 33bb4d8..4af3dfe 100644
--- a/drivers/s390/cio/css.h
+++ b/drivers/s390/cio/css.h
@@ -112,9 +112,6 @@
extern void css_reiterate_subchannels(void);
void css_update_ssd_info(struct subchannel *sch);
-#define __MAX_SUBCHANNEL 65535
-#define __MAX_SSID 3
-
struct channel_subsystem {
u8 cssid;
int valid;
diff --git a/drivers/s390/cio/device.c b/drivers/s390/cio/device.c
index fc916f5..fd3143c 100644
--- a/drivers/s390/cio/device.c
+++ b/drivers/s390/cio/device.c
@@ -1424,7 +1424,7 @@
}
if (device_is_disconnected(cdev))
return IO_SCH_REPROBE;
- if (cdev->online)
+ if (cdev->online && !cdev->private->flags.resuming)
return IO_SCH_VERIFY;
if (cdev->private->state == DEV_STATE_NOT_OPER)
return IO_SCH_UNREG_ATTACH;
@@ -1469,12 +1469,6 @@
rc = 0;
goto out_unlock;
case IO_SCH_VERIFY:
- if (cdev->private->flags.resuming == 1) {
- if (cio_enable_subchannel(sch, (u32)(addr_t)sch)) {
- ccw_device_set_notoper(cdev);
- break;
- }
- }
/* Trigger path verification. */
io_subchannel_verify(sch);
rc = 0;
diff --git a/drivers/s390/cio/idset.c b/drivers/s390/cio/idset.c
index e6d5f8c..65d13e3 100644
--- a/drivers/s390/cio/idset.c
+++ b/drivers/s390/cio/idset.c
@@ -1,9 +1,10 @@
/*
- * Copyright IBM Corp. 2007
+ * Copyright IBM Corp. 2007, 2012
* Author(s): Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
*/
#include <linux/vmalloc.h>
+#include <linux/bitmap.h>
#include <linux/bitops.h>
#include "idset.h"
#include "css.h"
@@ -89,6 +90,14 @@
idset_del(set, schid.ssid, schid.sch_no);
}
+/* Clear ids starting from @schid up to end of subchannel set. */
+void idset_sch_del_subseq(struct idset *set, struct subchannel_id schid)
+{
+ int pos = schid.ssid * set->num_id + schid.sch_no;
+
+ bitmap_clear(set->bitmap, pos, set->num_id - schid.sch_no);
+}
+
int idset_sch_contains(struct idset *set, struct subchannel_id schid)
{
return idset_contains(set, schid.ssid, schid.sch_no);
@@ -111,20 +120,12 @@
int idset_is_empty(struct idset *set)
{
- int bitnum;
-
- bitnum = find_first_bit(set->bitmap, set->num_ssid * set->num_id);
- if (bitnum >= set->num_ssid * set->num_id)
- return 1;
- return 0;
+ return bitmap_empty(set->bitmap, set->num_ssid * set->num_id);
}
void idset_add_set(struct idset *to, struct idset *from)
{
- unsigned long i, len;
+ int len = min(to->num_ssid * to->num_id, from->num_ssid * from->num_id);
- len = min(__BITOPS_WORDS(to->num_ssid * to->num_id),
- __BITOPS_WORDS(from->num_ssid * from->num_id));
- for (i = 0; i < len ; i++)
- to->bitmap[i] |= from->bitmap[i];
+ bitmap_or(to->bitmap, to->bitmap, from->bitmap, len);
}
diff --git a/drivers/s390/cio/idset.h b/drivers/s390/cio/idset.h
index 3d943f0..06d3bc0 100644
--- a/drivers/s390/cio/idset.h
+++ b/drivers/s390/cio/idset.h
@@ -1,5 +1,5 @@
/*
- * Copyright IBM Corp. 2007
+ * Copyright IBM Corp. 2007, 2012
* Author(s): Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
*/
@@ -17,6 +17,7 @@
struct idset *idset_sch_new(void);
void idset_sch_add(struct idset *set, struct subchannel_id id);
void idset_sch_del(struct idset *set, struct subchannel_id id);
+void idset_sch_del_subseq(struct idset *set, struct subchannel_id schid);
int idset_sch_contains(struct idset *set, struct subchannel_id id);
int idset_sch_get_first(struct idset *set, struct subchannel_id *id);
int idset_is_empty(struct idset *set);
diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c
index 3e25d315..4d6ba00 100644
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -2942,13 +2942,33 @@
QETH_DBF_TEXT(SETUP, 2, "qipasscb");
cmd = (struct qeth_ipa_cmd *) data;
+
+ switch (cmd->hdr.return_code) {
+ case IPA_RC_NOTSUPP:
+ case IPA_RC_L2_UNSUPPORTED_CMD:
+ QETH_DBF_TEXT(SETUP, 2, "ipaunsup");
+ card->options.ipa4.supported_funcs |= IPA_SETADAPTERPARMS;
+ card->options.ipa6.supported_funcs |= IPA_SETADAPTERPARMS;
+ return -0;
+ default:
+ if (cmd->hdr.return_code) {
+ QETH_DBF_MESSAGE(1, "%s IPA_CMD_QIPASSIST: Unhandled "
+ "rc=%d\n",
+ dev_name(&card->gdev->dev),
+ cmd->hdr.return_code);
+ return 0;
+ }
+ }
+
if (cmd->hdr.prot_version == QETH_PROT_IPV4) {
card->options.ipa4.supported_funcs = cmd->hdr.ipa_supported;
card->options.ipa4.enabled_funcs = cmd->hdr.ipa_enabled;
- } else {
+ } else if (cmd->hdr.prot_version == QETH_PROT_IPV6) {
card->options.ipa6.supported_funcs = cmd->hdr.ipa_supported;
card->options.ipa6.enabled_funcs = cmd->hdr.ipa_enabled;
- }
+ } else
+ QETH_DBF_MESSAGE(1, "%s IPA_CMD_QIPASSIST: Flawed LIC detected"
+ "\n", dev_name(&card->gdev->dev));
QETH_DBF_TEXT(SETUP, 2, "suppenbl");
QETH_DBF_TEXT_(SETUP, 2, "%08x", (__u32)cmd->hdr.ipa_supported);
QETH_DBF_TEXT_(SETUP, 2, "%08x", (__u32)cmd->hdr.ipa_enabled);
diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c
index e67e025..fddb626 100644
--- a/drivers/s390/net/qeth_l2_main.c
+++ b/drivers/s390/net/qeth_l2_main.c
@@ -626,10 +626,13 @@
QETH_DBF_TEXT(SETUP, 2, "doL2init");
QETH_DBF_TEXT_(SETUP, 2, "doL2%s", CARD_BUS_ID(card));
- rc = qeth_query_setadapterparms(card);
- if (rc) {
- QETH_DBF_MESSAGE(2, "could not query adapter parameters on "
- "device %s: x%x\n", CARD_BUS_ID(card), rc);
+ if (qeth_is_supported(card, IPA_SETADAPTERPARMS)) {
+ rc = qeth_query_setadapterparms(card);
+ if (rc) {
+ QETH_DBF_MESSAGE(2, "could not query adapter "
+ "parameters on device %s: x%x\n",
+ CARD_BUS_ID(card), rc);
+ }
}
if (card->info.type == QETH_CARD_TYPE_IQD ||
@@ -676,7 +679,7 @@
return -ERESTARTSYS;
}
rc = qeth_l2_send_delmac(card, &card->dev->dev_addr[0]);
- if (!rc)
+ if (!rc || (rc == IPA_RC_L2_MAC_NOT_FOUND))
rc = qeth_l2_send_setmac(card, addr->sa_data);
return rc ? -EINVAL : 0;
}
diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c
index c1bafc3..9594ab6 100644
--- a/drivers/scsi/isci/request.c
+++ b/drivers/scsi/isci/request.c
@@ -1972,7 +1972,7 @@
frame_index,
(void **)&frame_buffer);
- sci_controller_copy_sata_response(&ireq->stp.req,
+ sci_controller_copy_sata_response(&ireq->stp.rsp,
frame_header,
frame_buffer);
diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c
index bd4708a..20fd974 100644
--- a/drivers/scsi/qla2xxx/qla_mid.c
+++ b/drivers/scsi/qla2xxx/qla_mid.c
@@ -149,6 +149,7 @@
int
qla24xx_disable_vp(scsi_qla_host_t *vha)
{
+ unsigned long flags;
int ret;
ret = qla24xx_control_vp(vha, VCE_COMMAND_DISABLE_VPS_LOGO_ALL);
@@ -156,7 +157,9 @@
atomic_set(&vha->loop_down_timer, LOOP_DOWN_TIME);
/* Remove port id from vp target map */
+ spin_lock_irqsave(&vha->hw->vport_slock, flags);
qlt_update_vp_map(vha, RESET_AL_PA);
+ spin_unlock_irqrestore(&vha->hw->vport_slock, flags);
qla2x00_mark_vp_devices_dead(vha);
atomic_set(&vha->vp_state, VP_FAILED);
diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c
index 0e09d8f..62aa558 100644
--- a/drivers/scsi/qla2xxx/qla_target.c
+++ b/drivers/scsi/qla2xxx/qla_target.c
@@ -557,6 +557,7 @@
int pmap_len;
fc_port_t *fcport;
int global_resets;
+ unsigned long flags;
retry:
global_resets = atomic_read(&ha->tgt.qla_tgt->tgt_global_resets_count);
@@ -625,10 +626,10 @@
sess->s_id.b.area, sess->loop_id, fcport->d_id.b.domain,
fcport->d_id.b.al_pa, fcport->d_id.b.area, fcport->loop_id);
- sess->s_id = fcport->d_id;
- sess->loop_id = fcport->loop_id;
- sess->conf_compl_supported = !!(fcport->flags &
- FCF_CONF_COMP_SUPPORTED);
+ spin_lock_irqsave(&ha->hardware_lock, flags);
+ ha->tgt.tgt_ops->update_sess(sess, fcport->d_id, fcport->loop_id,
+ (fcport->flags & FCF_CONF_COMP_SUPPORTED));
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
res = true;
@@ -740,10 +741,9 @@
qlt_undelete_sess(sess);
kref_get(&sess->se_sess->sess_kref);
- sess->s_id = fcport->d_id;
- sess->loop_id = fcport->loop_id;
- sess->conf_compl_supported = !!(fcport->flags &
- FCF_CONF_COMP_SUPPORTED);
+ ha->tgt.tgt_ops->update_sess(sess, fcport->d_id, fcport->loop_id,
+ (fcport->flags & FCF_CONF_COMP_SUPPORTED));
+
if (sess->local && !local)
sess->local = 0;
spin_unlock_irqrestore(&ha->hardware_lock, flags);
@@ -796,8 +796,7 @@
*/
kref_get(&sess->se_sess->sess_kref);
- sess->conf_compl_supported = !!(fcport->flags &
- FCF_CONF_COMP_SUPPORTED);
+ sess->conf_compl_supported = (fcport->flags & FCF_CONF_COMP_SUPPORTED);
BUILD_BUG_ON(sizeof(sess->port_name) != sizeof(fcport->port_name));
memcpy(sess->port_name, fcport->port_name, sizeof(sess->port_name));
@@ -869,10 +868,8 @@
ql_dbg(ql_dbg_tgt_mgt, vha, 0xf007,
"Reappeared sess %p\n", sess);
}
- sess->s_id = fcport->d_id;
- sess->loop_id = fcport->loop_id;
- sess->conf_compl_supported = !!(fcport->flags &
- FCF_CONF_COMP_SUPPORTED);
+ ha->tgt.tgt_ops->update_sess(sess, fcport->d_id, fcport->loop_id,
+ (fcport->flags & FCF_CONF_COMP_SUPPORTED));
}
if (sess && sess->local) {
diff --git a/drivers/scsi/qla2xxx/qla_target.h b/drivers/scsi/qla2xxx/qla_target.h
index 170af15..bad7495 100644
--- a/drivers/scsi/qla2xxx/qla_target.h
+++ b/drivers/scsi/qla2xxx/qla_target.h
@@ -648,6 +648,7 @@
int (*check_initiator_node_acl)(struct scsi_qla_host *, unsigned char *,
void *, uint8_t *, uint16_t);
+ void (*update_sess)(struct qla_tgt_sess *, port_id_t, uint16_t, bool);
struct qla_tgt_sess *(*find_sess_by_loop_id)(struct scsi_qla_host *,
const uint16_t);
struct qla_tgt_sess *(*find_sess_by_s_id)(struct scsi_qla_host *,
diff --git a/drivers/scsi/qla2xxx/tcm_qla2xxx.c b/drivers/scsi/qla2xxx/tcm_qla2xxx.c
index 2358c16..3d74f2f 100644
--- a/drivers/scsi/qla2xxx/tcm_qla2xxx.c
+++ b/drivers/scsi/qla2xxx/tcm_qla2xxx.c
@@ -237,7 +237,7 @@
struct tcm_qla2xxx_tpg, se_tpg);
struct tcm_qla2xxx_lport *lport = tpg->lport;
- return &lport->lport_name[0];
+ return lport->lport_naa_name;
}
static char *tcm_qla2xxx_npiv_get_fabric_wwn(struct se_portal_group *se_tpg)
@@ -1457,6 +1457,78 @@
return 0;
}
+static void tcm_qla2xxx_update_sess(struct qla_tgt_sess *sess, port_id_t s_id,
+ uint16_t loop_id, bool conf_compl_supported)
+{
+ struct qla_tgt *tgt = sess->tgt;
+ struct qla_hw_data *ha = tgt->ha;
+ struct tcm_qla2xxx_lport *lport = ha->tgt.target_lport_ptr;
+ struct se_node_acl *se_nacl = sess->se_sess->se_node_acl;
+ struct tcm_qla2xxx_nacl *nacl = container_of(se_nacl,
+ struct tcm_qla2xxx_nacl, se_node_acl);
+ u32 key;
+
+
+ if (sess->loop_id != loop_id || sess->s_id.b24 != s_id.b24)
+ pr_info("Updating session %p from port %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x loop_id %d -> %d s_id %x:%x:%x -> %x:%x:%x\n",
+ sess,
+ sess->port_name[0], sess->port_name[1],
+ sess->port_name[2], sess->port_name[3],
+ sess->port_name[4], sess->port_name[5],
+ sess->port_name[6], sess->port_name[7],
+ sess->loop_id, loop_id,
+ sess->s_id.b.domain, sess->s_id.b.area, sess->s_id.b.al_pa,
+ s_id.b.domain, s_id.b.area, s_id.b.al_pa);
+
+ if (sess->loop_id != loop_id) {
+ /*
+ * Because we can shuffle loop IDs around and we
+ * update different sessions non-atomically, we might
+ * have overwritten this session's old loop ID
+ * already, and we might end up overwriting some other
+ * session that will be updated later. So we have to
+ * be extra careful and we can't warn about those things...
+ */
+ if (lport->lport_loopid_map[sess->loop_id].se_nacl == se_nacl)
+ lport->lport_loopid_map[sess->loop_id].se_nacl = NULL;
+
+ lport->lport_loopid_map[loop_id].se_nacl = se_nacl;
+
+ sess->loop_id = loop_id;
+ }
+
+ if (sess->s_id.b24 != s_id.b24) {
+ key = (((u32) sess->s_id.b.domain << 16) |
+ ((u32) sess->s_id.b.area << 8) |
+ ((u32) sess->s_id.b.al_pa));
+
+ if (btree_lookup32(&lport->lport_fcport_map, key))
+ WARN(btree_remove32(&lport->lport_fcport_map, key) != se_nacl,
+ "Found wrong se_nacl when updating s_id %x:%x:%x\n",
+ sess->s_id.b.domain, sess->s_id.b.area, sess->s_id.b.al_pa);
+ else
+ WARN(1, "No lport_fcport_map entry for s_id %x:%x:%x\n",
+ sess->s_id.b.domain, sess->s_id.b.area, sess->s_id.b.al_pa);
+
+ key = (((u32) s_id.b.domain << 16) |
+ ((u32) s_id.b.area << 8) |
+ ((u32) s_id.b.al_pa));
+
+ if (btree_lookup32(&lport->lport_fcport_map, key)) {
+ WARN(1, "Already have lport_fcport_map entry for s_id %x:%x:%x\n",
+ s_id.b.domain, s_id.b.area, s_id.b.al_pa);
+ btree_update32(&lport->lport_fcport_map, key, se_nacl);
+ } else {
+ btree_insert32(&lport->lport_fcport_map, key, se_nacl, GFP_ATOMIC);
+ }
+
+ sess->s_id = s_id;
+ nacl->nport_id = key;
+ }
+
+ sess->conf_compl_supported = conf_compl_supported;
+}
+
/*
* Calls into tcm_qla2xxx used by qla2xxx LLD I/O path.
*/
@@ -1467,6 +1539,7 @@
.free_cmd = tcm_qla2xxx_free_cmd,
.free_mcmd = tcm_qla2xxx_free_mcmd,
.free_session = tcm_qla2xxx_free_session,
+ .update_sess = tcm_qla2xxx_update_sess,
.check_initiator_node_acl = tcm_qla2xxx_check_initiator_node_acl,
.find_sess_by_s_id = tcm_qla2xxx_find_sess_by_s_id,
.find_sess_by_loop_id = tcm_qla2xxx_find_sess_by_loop_id,
@@ -1534,6 +1607,7 @@
lport->lport_wwpn = wwpn;
tcm_qla2xxx_format_wwn(&lport->lport_name[0], TCM_QLA2XXX_NAMELEN,
wwpn);
+ sprintf(lport->lport_naa_name, "naa.%016llx", (unsigned long long) wwpn);
ret = tcm_qla2xxx_init_lport(lport);
if (ret != 0)
@@ -1601,6 +1675,7 @@
lport->lport_npiv_wwnn = npiv_wwnn;
tcm_qla2xxx_npiv_format_wwn(&lport->lport_npiv_name[0],
TCM_QLA2XXX_NAMELEN, npiv_wwpn, npiv_wwnn);
+ sprintf(lport->lport_naa_name, "naa.%016llx", (unsigned long long) npiv_wwpn);
/* FIXME: tcm_qla2xxx_npiv_make_lport */
ret = -ENOSYS;
diff --git a/drivers/scsi/qla2xxx/tcm_qla2xxx.h b/drivers/scsi/qla2xxx/tcm_qla2xxx.h
index 8254981..9ba075f 100644
--- a/drivers/scsi/qla2xxx/tcm_qla2xxx.h
+++ b/drivers/scsi/qla2xxx/tcm_qla2xxx.h
@@ -61,6 +61,8 @@
u64 lport_npiv_wwnn;
/* ASCII formatted WWPN for FC Target Lport */
char lport_name[TCM_QLA2XXX_NAMELEN];
+ /* ASCII formatted naa WWPN for VPD page 83 etc */
+ char lport_naa_name[TCM_QLA2XXX_NAMELEN];
/* ASCII formatted WWPN+WWNN for NPIV FC Target Lport */
char lport_npiv_name[TCM_QLA2XXX_NPIV_NAMELEN];
/* map for fc_port pointers in 24-bit FC Port ID space */
diff --git a/drivers/scsi/qlogicpti.c b/drivers/scsi/qlogicpti.c
index b191dd5..71fddbc 100644
--- a/drivers/scsi/qlogicpti.c
+++ b/drivers/scsi/qlogicpti.c
@@ -1294,26 +1294,19 @@
static const struct of_device_id qpti_match[];
static int __devinit qpti_sbus_probe(struct platform_device *op)
{
- const struct of_device_id *match;
- struct scsi_host_template *tpnt;
struct device_node *dp = op->dev.of_node;
struct Scsi_Host *host;
struct qlogicpti *qpti;
static int nqptis;
const char *fcode;
- match = of_match_device(qpti_match, &op->dev);
- if (!match)
- return -EINVAL;
- tpnt = match->data;
-
/* Sometimes Antares cards come up not completely
* setup, and we get a report of a zero IRQ.
*/
if (op->archdata.irqs[0] == 0)
return -ENODEV;
- host = scsi_host_alloc(tpnt, sizeof(struct qlogicpti));
+ host = scsi_host_alloc(&qpti_template, sizeof(struct qlogicpti));
if (!host)
return -ENOMEM;
@@ -1445,19 +1438,15 @@
static const struct of_device_id qpti_match[] = {
{
.name = "ptisp",
- .data = &qpti_template,
},
{
.name = "PTI,ptisp",
- .data = &qpti_template,
},
{
.name = "QLGC,isp",
- .data = &qpti_template,
},
{
.name = "SUNW,isp",
- .data = &qpti_template,
},
{},
};
diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c
index 2936b44..2c0d0ec 100644
--- a/drivers/scsi/scsi.c
+++ b/drivers/scsi/scsi.c
@@ -55,6 +55,7 @@
#include <linux/cpu.h>
#include <linux/mutex.h>
#include <linux/async.h>
+#include <asm/unaligned.h>
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
@@ -1062,6 +1063,50 @@
EXPORT_SYMBOL_GPL(scsi_get_vpd_page);
/**
+ * scsi_report_opcode - Find out if a given command opcode is supported
+ * @sdev: scsi device to query
+ * @buffer: scratch buffer (must be at least 20 bytes long)
+ * @len: length of buffer
+ * @opcode: opcode for command to look up
+ *
+ * Uses the REPORT SUPPORTED OPERATION CODES to look up the given
+ * opcode. Returns 0 if RSOC fails or if the command opcode is
+ * unsupported. Returns 1 if the device claims to support the command.
+ */
+int scsi_report_opcode(struct scsi_device *sdev, unsigned char *buffer,
+ unsigned int len, unsigned char opcode)
+{
+ unsigned char cmd[16];
+ struct scsi_sense_hdr sshdr;
+ int result;
+
+ if (sdev->no_report_opcodes || sdev->scsi_level < SCSI_SPC_3)
+ return 0;
+
+ memset(cmd, 0, 16);
+ cmd[0] = MAINTENANCE_IN;
+ cmd[1] = MI_REPORT_SUPPORTED_OPERATION_CODES;
+ cmd[2] = 1; /* One command format */
+ cmd[3] = opcode;
+ put_unaligned_be32(len, &cmd[6]);
+ memset(buffer, 0, len);
+
+ result = scsi_execute_req(sdev, cmd, DMA_FROM_DEVICE, buffer, len,
+ &sshdr, 30 * HZ, 3, NULL);
+
+ if (result && scsi_sense_valid(&sshdr) &&
+ sshdr.sense_key == ILLEGAL_REQUEST &&
+ (sshdr.asc == 0x20 || sshdr.asc == 0x24) && sshdr.ascq == 0x00)
+ return 0;
+
+ if ((buffer[1] & 3) == 3) /* Command supported */
+ return 1;
+
+ return 0;
+}
+EXPORT_SYMBOL(scsi_report_opcode);
+
+/**
* scsi_device_get - get an additional reference to a scsi_device
* @sdev: device to get a reference to
*
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index da36a3a..9032e91 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -900,11 +900,23 @@
action = ACTION_FAIL;
error = -EILSEQ;
/* INVALID COMMAND OPCODE or INVALID FIELD IN CDB */
- } else if ((sshdr.asc == 0x20 || sshdr.asc == 0x24) &&
- (cmd->cmnd[0] == UNMAP ||
- cmd->cmnd[0] == WRITE_SAME_16 ||
- cmd->cmnd[0] == WRITE_SAME)) {
- description = "Discard failure";
+ } else if (sshdr.asc == 0x20 || sshdr.asc == 0x24) {
+ switch (cmd->cmnd[0]) {
+ case UNMAP:
+ description = "Discard failure";
+ break;
+ case WRITE_SAME:
+ case WRITE_SAME_16:
+ if (cmd->cmnd[1] & 0x8)
+ description = "Discard failure";
+ else
+ description =
+ "Write same failure";
+ break;
+ default:
+ description = "Invalid command failure";
+ break;
+ }
action = ACTION_FAIL;
error = -EREMOTEIO;
} else
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 12f6fdf..352bc77 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -99,6 +99,7 @@
#endif
static void sd_config_discard(struct scsi_disk *, unsigned int);
+static void sd_config_write_same(struct scsi_disk *);
static int sd_revalidate_disk(struct gendisk *);
static void sd_unlock_native_capacity(struct gendisk *disk);
static int sd_probe(struct device *);
@@ -395,6 +396,45 @@
return err ? err : count;
}
+static ssize_t
+sd_show_write_same_blocks(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct scsi_disk *sdkp = to_scsi_disk(dev);
+
+ return snprintf(buf, 20, "%u\n", sdkp->max_ws_blocks);
+}
+
+static ssize_t
+sd_store_write_same_blocks(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct scsi_disk *sdkp = to_scsi_disk(dev);
+ struct scsi_device *sdp = sdkp->device;
+ unsigned long max;
+ int err;
+
+ if (!capable(CAP_SYS_ADMIN))
+ return -EACCES;
+
+ if (sdp->type != TYPE_DISK)
+ return -EINVAL;
+
+ err = kstrtoul(buf, 10, &max);
+
+ if (err)
+ return err;
+
+ if (max == 0)
+ sdp->no_write_same = 1;
+ else if (max <= SD_MAX_WS16_BLOCKS)
+ sdkp->max_ws_blocks = max;
+
+ sd_config_write_same(sdkp);
+
+ return count;
+}
+
static struct device_attribute sd_disk_attrs[] = {
__ATTR(cache_type, S_IRUGO|S_IWUSR, sd_show_cache_type,
sd_store_cache_type),
@@ -410,6 +450,8 @@
__ATTR(thin_provisioning, S_IRUGO, sd_show_thin_provisioning, NULL),
__ATTR(provisioning_mode, S_IRUGO|S_IWUSR, sd_show_provisioning_mode,
sd_store_provisioning_mode),
+ __ATTR(max_write_same_blocks, S_IRUGO|S_IWUSR,
+ sd_show_write_same_blocks, sd_store_write_same_blocks),
__ATTR(max_medium_access_timeouts, S_IRUGO|S_IWUSR,
sd_show_max_medium_access_timeouts,
sd_store_max_medium_access_timeouts),
@@ -561,19 +603,23 @@
return;
case SD_LBP_UNMAP:
- max_blocks = min_not_zero(sdkp->max_unmap_blocks, 0xffffffff);
+ max_blocks = min_not_zero(sdkp->max_unmap_blocks,
+ (u32)SD_MAX_WS16_BLOCKS);
break;
case SD_LBP_WS16:
- max_blocks = min_not_zero(sdkp->max_ws_blocks, 0xffffffff);
+ max_blocks = min_not_zero(sdkp->max_ws_blocks,
+ (u32)SD_MAX_WS16_BLOCKS);
break;
case SD_LBP_WS10:
- max_blocks = min_not_zero(sdkp->max_ws_blocks, (u32)0xffff);
+ max_blocks = min_not_zero(sdkp->max_ws_blocks,
+ (u32)SD_MAX_WS10_BLOCKS);
break;
case SD_LBP_ZERO:
- max_blocks = min_not_zero(sdkp->max_ws_blocks, (u32)0xffff);
+ max_blocks = min_not_zero(sdkp->max_ws_blocks,
+ (u32)SD_MAX_WS10_BLOCKS);
q->limits.discard_zeroes_data = 1;
break;
}
@@ -583,29 +629,26 @@
}
/**
- * scsi_setup_discard_cmnd - unmap blocks on thinly provisioned device
+ * sd_setup_discard_cmnd - unmap blocks on thinly provisioned device
* @sdp: scsi device to operate one
* @rq: Request to prepare
*
* Will issue either UNMAP or WRITE SAME(16) depending on preference
* indicated by target device.
**/
-static int scsi_setup_discard_cmnd(struct scsi_device *sdp, struct request *rq)
+static int sd_setup_discard_cmnd(struct scsi_device *sdp, struct request *rq)
{
struct scsi_disk *sdkp = scsi_disk(rq->rq_disk);
- struct bio *bio = rq->bio;
- sector_t sector = bio->bi_sector;
- unsigned int nr_sectors = bio_sectors(bio);
+ sector_t sector = blk_rq_pos(rq);
+ unsigned int nr_sectors = blk_rq_sectors(rq);
+ unsigned int nr_bytes = blk_rq_bytes(rq);
unsigned int len;
int ret;
char *buf;
struct page *page;
- if (sdkp->device->sector_size == 4096) {
- sector >>= 3;
- nr_sectors >>= 3;
- }
-
+ sector >>= ilog2(sdp->sector_size) - 9;
+ nr_sectors >>= ilog2(sdp->sector_size) - 9;
rq->timeout = SD_TIMEOUT;
memset(rq->cmd, 0, rq->cmd_len);
@@ -660,6 +703,7 @@
blk_add_request_payload(rq, page, len);
ret = scsi_setup_blk_pc_cmnd(sdp, rq);
rq->buffer = page_address(page);
+ rq->__data_len = nr_bytes;
out:
if (ret != BLKPREP_OK) {
@@ -669,6 +713,83 @@
return ret;
}
+static void sd_config_write_same(struct scsi_disk *sdkp)
+{
+ struct request_queue *q = sdkp->disk->queue;
+ unsigned int logical_block_size = sdkp->device->sector_size;
+ unsigned int blocks = 0;
+
+ if (sdkp->device->no_write_same) {
+ sdkp->max_ws_blocks = 0;
+ goto out;
+ }
+
+ /* Some devices can not handle block counts above 0xffff despite
+ * supporting WRITE SAME(16). Consequently we default to 64k
+ * blocks per I/O unless the device explicitly advertises a
+ * bigger limit.
+ */
+ if (sdkp->max_ws_blocks == 0)
+ sdkp->max_ws_blocks = SD_MAX_WS10_BLOCKS;
+
+ if (sdkp->ws16 || sdkp->max_ws_blocks > SD_MAX_WS10_BLOCKS)
+ blocks = min_not_zero(sdkp->max_ws_blocks,
+ (u32)SD_MAX_WS16_BLOCKS);
+ else
+ blocks = min_not_zero(sdkp->max_ws_blocks,
+ (u32)SD_MAX_WS10_BLOCKS);
+
+out:
+ blk_queue_max_write_same_sectors(q, blocks * (logical_block_size >> 9));
+}
+
+/**
+ * sd_setup_write_same_cmnd - write the same data to multiple blocks
+ * @sdp: scsi device to operate one
+ * @rq: Request to prepare
+ *
+ * Will issue either WRITE SAME(10) or WRITE SAME(16) depending on
+ * preference indicated by target device.
+ **/
+static int sd_setup_write_same_cmnd(struct scsi_device *sdp, struct request *rq)
+{
+ struct scsi_disk *sdkp = scsi_disk(rq->rq_disk);
+ struct bio *bio = rq->bio;
+ sector_t sector = blk_rq_pos(rq);
+ unsigned int nr_sectors = blk_rq_sectors(rq);
+ unsigned int nr_bytes = blk_rq_bytes(rq);
+ int ret;
+
+ if (sdkp->device->no_write_same)
+ return BLKPREP_KILL;
+
+ BUG_ON(bio_offset(bio) || bio_iovec(bio)->bv_len != sdp->sector_size);
+
+ sector >>= ilog2(sdp->sector_size) - 9;
+ nr_sectors >>= ilog2(sdp->sector_size) - 9;
+
+ rq->__data_len = sdp->sector_size;
+ rq->timeout = SD_WRITE_SAME_TIMEOUT;
+ memset(rq->cmd, 0, rq->cmd_len);
+
+ if (sdkp->ws16 || sector > 0xffffffff || nr_sectors > 0xffff) {
+ rq->cmd_len = 16;
+ rq->cmd[0] = WRITE_SAME_16;
+ put_unaligned_be64(sector, &rq->cmd[2]);
+ put_unaligned_be32(nr_sectors, &rq->cmd[10]);
+ } else {
+ rq->cmd_len = 10;
+ rq->cmd[0] = WRITE_SAME;
+ put_unaligned_be32(sector, &rq->cmd[2]);
+ put_unaligned_be16(nr_sectors, &rq->cmd[7]);
+ }
+
+ ret = scsi_setup_blk_pc_cmnd(sdp, rq);
+ rq->__data_len = nr_bytes;
+
+ return ret;
+}
+
static int scsi_setup_flush_cmnd(struct scsi_device *sdp, struct request *rq)
{
rq->timeout = SD_FLUSH_TIMEOUT;
@@ -712,7 +833,10 @@
* block PC requests to make life easier.
*/
if (rq->cmd_flags & REQ_DISCARD) {
- ret = scsi_setup_discard_cmnd(sdp, rq);
+ ret = sd_setup_discard_cmnd(sdp, rq);
+ goto out;
+ } else if (rq->cmd_flags & REQ_WRITE_SAME) {
+ ret = sd_setup_write_same_cmnd(sdp, rq);
goto out;
} else if (rq->cmd_flags & REQ_FLUSH) {
ret = scsi_setup_flush_cmnd(sdp, rq);
@@ -1482,12 +1606,21 @@
unsigned int good_bytes = result ? 0 : scsi_bufflen(SCpnt);
struct scsi_sense_hdr sshdr;
struct scsi_disk *sdkp = scsi_disk(SCpnt->request->rq_disk);
+ struct request *req = SCpnt->request;
int sense_valid = 0;
int sense_deferred = 0;
unsigned char op = SCpnt->cmnd[0];
+ unsigned char unmap = SCpnt->cmnd[1] & 8;
- if ((SCpnt->request->cmd_flags & REQ_DISCARD) && !result)
- scsi_set_resid(SCpnt, 0);
+ if (req->cmd_flags & REQ_DISCARD || req->cmd_flags & REQ_WRITE_SAME) {
+ if (!result) {
+ good_bytes = blk_rq_bytes(req);
+ scsi_set_resid(SCpnt, 0);
+ } else {
+ good_bytes = 0;
+ scsi_set_resid(SCpnt, blk_rq_bytes(req));
+ }
+ }
if (result) {
sense_valid = scsi_command_normalize_sense(SCpnt, &sshdr);
@@ -1536,9 +1669,25 @@
if (sshdr.asc == 0x10) /* DIX: Host detected corruption */
good_bytes = sd_completed_bytes(SCpnt);
/* INVALID COMMAND OPCODE or INVALID FIELD IN CDB */
- if ((sshdr.asc == 0x20 || sshdr.asc == 0x24) &&
- (op == UNMAP || op == WRITE_SAME_16 || op == WRITE_SAME))
- sd_config_discard(sdkp, SD_LBP_DISABLE);
+ if (sshdr.asc == 0x20 || sshdr.asc == 0x24) {
+ switch (op) {
+ case UNMAP:
+ sd_config_discard(sdkp, SD_LBP_DISABLE);
+ break;
+ case WRITE_SAME_16:
+ case WRITE_SAME:
+ if (unmap)
+ sd_config_discard(sdkp, SD_LBP_DISABLE);
+ else {
+ sdkp->device->no_write_same = 1;
+ sd_config_write_same(sdkp);
+
+ good_bytes = 0;
+ req->__data_len = blk_rq_bytes(req);
+ req->cmd_flags |= REQ_QUIET;
+ }
+ }
+ }
break;
default:
break;
@@ -2374,9 +2523,7 @@
if (buffer[3] == 0x3c) {
unsigned int lba_count, desc_count;
- sdkp->max_ws_blocks =
- (u32) min_not_zero(get_unaligned_be64(&buffer[36]),
- (u64)0xffffffff);
+ sdkp->max_ws_blocks = (u32)get_unaligned_be64(&buffer[36]);
if (!sdkp->lbpme)
goto out;
@@ -2469,6 +2616,13 @@
kfree(buffer);
}
+static void sd_read_write_same(struct scsi_disk *sdkp, unsigned char *buffer)
+{
+ if (scsi_report_opcode(sdkp->device, buffer, SD_BUF_SIZE,
+ WRITE_SAME_16))
+ sdkp->ws16 = 1;
+}
+
static int sd_try_extended_inquiry(struct scsi_device *sdp)
{
/*
@@ -2528,6 +2682,7 @@
sd_read_write_protect_flag(sdkp, buffer);
sd_read_cache_type(sdkp, buffer);
sd_read_app_tag_own(sdkp, buffer);
+ sd_read_write_same(sdkp, buffer);
}
sdkp->first_scan = 0;
@@ -2545,6 +2700,7 @@
blk_queue_flush(sdkp->disk->queue, flush);
set_capacity(disk, sdkp->capacity);
+ sd_config_write_same(sdkp);
kfree(buffer);
out:
diff --git a/drivers/scsi/sd.h b/drivers/scsi/sd.h
index 47c52a6..74a1e4c 100644
--- a/drivers/scsi/sd.h
+++ b/drivers/scsi/sd.h
@@ -14,6 +14,7 @@
#define SD_TIMEOUT (30 * HZ)
#define SD_MOD_TIMEOUT (75 * HZ)
#define SD_FLUSH_TIMEOUT (60 * HZ)
+#define SD_WRITE_SAME_TIMEOUT (120 * HZ)
/*
* Number of allowed retries
@@ -39,6 +40,11 @@
};
enum {
+ SD_MAX_WS10_BLOCKS = 0xffff,
+ SD_MAX_WS16_BLOCKS = 0x7fffff,
+};
+
+enum {
SD_LBP_FULL = 0, /* Full logical block provisioning */
SD_LBP_UNMAP, /* Use UNMAP command */
SD_LBP_WS16, /* Use WRITE SAME(16) with UNMAP bit */
@@ -77,6 +83,7 @@
unsigned lbpws : 1;
unsigned lbpws10 : 1;
unsigned lbpvpd : 1;
+ unsigned ws16 : 1;
};
#define to_scsi_disk(obj) container_of(obj,struct scsi_disk,dev)
diff --git a/drivers/spi/spi-mxs.c b/drivers/spi/spi-mxs.c
index edf1360..86dd04d 100644
--- a/drivers/spi/spi-mxs.c
+++ b/drivers/spi/spi-mxs.c
@@ -323,6 +323,7 @@
if (!ret) {
dev_err(ssp->dev, "DMA transfer timeout\n");
ret = -ETIMEDOUT;
+ dmaengine_terminate_all(ssp->dmach);
goto err_vmalloc;
}
@@ -480,7 +481,7 @@
first = last = 0;
}
- m->status = 0;
+ m->status = status;
spi_finalize_current_message(master);
return status;
diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c
index 9194641..a1db91a 100644
--- a/drivers/spi/spi-pl022.c
+++ b/drivers/spi/spi-pl022.c
@@ -2186,8 +2186,6 @@
printk(KERN_INFO "pl022: mapped registers from 0x%08x to %p\n",
adev->res.start, pl022->virtbase);
- pm_runtime_resume(dev);
-
pl022->clk = devm_clk_get(&adev->dev, NULL);
if (IS_ERR(pl022->clk)) {
status = PTR_ERR(pl022->clk);
@@ -2292,7 +2290,6 @@
clk_disable(pl022->clk);
clk_unprepare(pl022->clk);
- pm_runtime_disable(&adev->dev);
amba_release_regions(adev);
tasklet_disable(&pl022->pump_transfers);
spi_unregister_master(pl022->master);
diff --git a/drivers/spi/spi-rspi.c b/drivers/spi/spi-rspi.c
index 4894bde..30faf6d 100644
--- a/drivers/spi/spi-rspi.c
+++ b/drivers/spi/spi-rspi.c
@@ -147,8 +147,6 @@
unsigned char spsr;
/* for dmaengine */
- struct sh_dmae_slave dma_tx;
- struct sh_dmae_slave dma_rx;
struct dma_chan *chan_tx;
struct dma_chan *chan_rx;
int irq;
@@ -663,20 +661,16 @@
return ret;
}
-static bool rspi_filter(struct dma_chan *chan, void *filter_param)
-{
- chan->private = filter_param;
- return true;
-}
-
-static void __devinit rspi_request_dma(struct rspi_data *rspi,
- struct platform_device *pdev)
+static int __devinit rspi_request_dma(struct rspi_data *rspi,
+ struct platform_device *pdev)
{
struct rspi_plat_data *rspi_pd = pdev->dev.platform_data;
dma_cap_mask_t mask;
+ struct dma_slave_config cfg;
+ int ret;
if (!rspi_pd)
- return;
+ return 0; /* The driver assumes no error. */
rspi->dma_width_16bit = rspi_pd->dma_width_16bit;
@@ -684,21 +678,35 @@
if (rspi_pd->dma_rx_id && rspi_pd->dma_tx_id) {
dma_cap_zero(mask);
dma_cap_set(DMA_SLAVE, mask);
- rspi->dma_rx.slave_id = rspi_pd->dma_rx_id;
- rspi->chan_rx = dma_request_channel(mask, rspi_filter,
- &rspi->dma_rx);
- if (rspi->chan_rx)
- dev_info(&pdev->dev, "Use DMA when rx.\n");
+ rspi->chan_rx = dma_request_channel(mask, shdma_chan_filter,
+ (void *)rspi_pd->dma_rx_id);
+ if (rspi->chan_rx) {
+ cfg.slave_id = rspi_pd->dma_rx_id;
+ cfg.direction = DMA_DEV_TO_MEM;
+ ret = dmaengine_slave_config(rspi->chan_rx, &cfg);
+ if (!ret)
+ dev_info(&pdev->dev, "Use DMA when rx.\n");
+ else
+ return ret;
+ }
}
if (rspi_pd->dma_tx_id) {
dma_cap_zero(mask);
dma_cap_set(DMA_SLAVE, mask);
- rspi->dma_tx.slave_id = rspi_pd->dma_tx_id;
- rspi->chan_tx = dma_request_channel(mask, rspi_filter,
- &rspi->dma_tx);
- if (rspi->chan_tx)
- dev_info(&pdev->dev, "Use DMA when tx\n");
+ rspi->chan_tx = dma_request_channel(mask, shdma_chan_filter,
+ (void *)rspi_pd->dma_tx_id);
+ if (rspi->chan_tx) {
+ cfg.slave_id = rspi_pd->dma_tx_id;
+ cfg.direction = DMA_MEM_TO_DEV;
+ ret = dmaengine_slave_config(rspi->chan_tx, &cfg);
+ if (!ret)
+ dev_info(&pdev->dev, "Use DMA when tx\n");
+ else
+ return ret;
+ }
}
+
+ return 0;
}
static void __devexit rspi_release_dma(struct rspi_data *rspi)
@@ -788,7 +796,11 @@
}
rspi->irq = irq;
- rspi_request_dma(rspi, pdev);
+ ret = rspi_request_dma(rspi, pdev);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "rspi_request_dma failed.\n");
+ goto error4;
+ }
ret = spi_register_master(master);
if (ret < 0) {
diff --git a/drivers/staging/android/android_alarm.h b/drivers/staging/android/android_alarm.h
index f2ffd96..d0cafd6 100644
--- a/drivers/staging/android/android_alarm.h
+++ b/drivers/staging/android/android_alarm.h
@@ -51,12 +51,10 @@
#define ANDROID_ALARM_WAIT _IO('a', 1)
#define ALARM_IOW(c, type, size) _IOW('a', (c) | ((type) << 4), size)
-#define ALARM_IOR(c, type, size) _IOR('a', (c) | ((type) << 4), size)
-
/* Set alarm */
#define ANDROID_ALARM_SET(type) ALARM_IOW(2, type, struct timespec)
#define ANDROID_ALARM_SET_AND_WAIT(type) ALARM_IOW(3, type, struct timespec)
-#define ANDROID_ALARM_GET_TIME(type) ALARM_IOR(4, type, struct timespec)
+#define ANDROID_ALARM_GET_TIME(type) ALARM_IOW(4, type, struct timespec)
#define ANDROID_ALARM_SET_RTC _IOW('a', 5, struct timespec)
#define ANDROID_ALARM_BASE_CMD(cmd) (cmd & ~(_IOC(0, 0, 0xf0, 0)))
#define ANDROID_ALARM_IOCTL_TO_TYPE(cmd) (_IOC_NR(cmd) >> 4)
diff --git a/drivers/staging/android/binder.c b/drivers/staging/android/binder.c
index 7b0ba92..5d4610b 100644
--- a/drivers/staging/android/binder.c
+++ b/drivers/staging/android/binder.c
@@ -567,7 +567,7 @@
page = &proc->pages[(page_addr - proc->buffer) / PAGE_SIZE];
BUG_ON(*page);
- *page = alloc_page(GFP_KERNEL | __GFP_ZERO);
+ *page = alloc_page(GFP_KERNEL | __GFP_HIGHMEM | __GFP_ZERO);
if (*page == NULL) {
pr_err("binder: %d: binder_alloc_buf failed "
"for page at %p\n", proc->pid, page_addr);
@@ -2419,14 +2419,38 @@
struct binder_transaction *t;
t = container_of(w, struct binder_transaction, work);
- if (t->buffer->target_node && !(t->flags & TF_ONE_WAY))
+ if (t->buffer->target_node &&
+ !(t->flags & TF_ONE_WAY)) {
binder_send_failed_reply(t, BR_DEAD_REPLY);
+ } else {
+ binder_debug(BINDER_DEBUG_DEAD_TRANSACTION,
+ "binder: undelivered transaction %d\n",
+ t->debug_id);
+ t->buffer->transaction = NULL;
+ kfree(t);
+ binder_stats_deleted(BINDER_STAT_TRANSACTION);
+ }
} break;
case BINDER_WORK_TRANSACTION_COMPLETE: {
+ binder_debug(BINDER_DEBUG_DEAD_TRANSACTION,
+ "binder: undelivered TRANSACTION_COMPLETE\n");
kfree(w);
binder_stats_deleted(BINDER_STAT_TRANSACTION_COMPLETE);
} break;
+ case BINDER_WORK_DEAD_BINDER_AND_CLEAR:
+ case BINDER_WORK_CLEAR_DEATH_NOTIFICATION: {
+ struct binder_ref_death *death;
+
+ death = container_of(w, struct binder_ref_death, work);
+ binder_debug(BINDER_DEBUG_DEAD_TRANSACTION,
+ "binder: undelivered death notification, %p\n",
+ death->cookie);
+ kfree(death);
+ binder_stats_deleted(BINDER_STAT_DEATH);
+ } break;
default:
+ pr_err("binder: unexpected work type, %d, not freed\n",
+ w->type);
break;
}
}
@@ -2899,6 +2923,7 @@
nodes++;
rb_erase(&node->rb_node, &proc->nodes);
list_del_init(&node->work.entry);
+ binder_release_work(&node->async_todo);
if (hlist_empty(&node->refs)) {
kfree(node);
binder_stats_deleted(BINDER_STAT_NODE);
@@ -2937,6 +2962,7 @@
binder_delete_ref(ref);
}
binder_release_work(&proc->todo);
+ binder_release_work(&proc->delivered_death);
buffers = 0;
while ((n = rb_first(&proc->allocated_buffers))) {
diff --git a/drivers/staging/comedi/drivers/8255_pci.c b/drivers/staging/comedi/drivers/8255_pci.c
index 7dff3c0..d00aff6 100644
--- a/drivers/staging/comedi/drivers/8255_pci.c
+++ b/drivers/staging/comedi/drivers/8255_pci.c
@@ -289,6 +289,8 @@
struct comedi_subdevice *s;
int i;
+ if (!board || !devpriv)
+ return;
if (dev->subdevices) {
for (i = 0; i < board->n_8255; i++) {
s = &dev->subdevices[i];
diff --git a/drivers/staging/comedi/drivers/amplc_dio200.c b/drivers/staging/comedi/drivers/amplc_dio200.c
index 08f3052..29eb52d 100644
--- a/drivers/staging/comedi/drivers/amplc_dio200.c
+++ b/drivers/staging/comedi/drivers/amplc_dio200.c
@@ -1410,6 +1410,8 @@
const struct dio200_layout_struct *layout;
unsigned n;
+ if (!thisboard)
+ return;
if (dev->irq)
free_irq(dev->irq, dev);
if (dev->subdevices) {
diff --git a/drivers/staging/comedi/drivers/amplc_pc236.c b/drivers/staging/comedi/drivers/amplc_pc236.c
index eacb5e4..4e4f3c1 100644
--- a/drivers/staging/comedi/drivers/amplc_pc236.c
+++ b/drivers/staging/comedi/drivers/amplc_pc236.c
@@ -573,9 +573,10 @@
static void pc236_detach(struct comedi_device *dev)
{
const struct pc236_board *thisboard = comedi_board(dev);
- struct pc236_private *devpriv = dev->private;
- if (devpriv)
+ if (!thisboard)
+ return;
+ if (dev->iobase)
pc236_intr_disable(dev);
if (dev->irq)
free_irq(dev->irq, dev);
diff --git a/drivers/staging/comedi/drivers/amplc_pc263.c b/drivers/staging/comedi/drivers/amplc_pc263.c
index 60830cc..d0a4c44 100644
--- a/drivers/staging/comedi/drivers/amplc_pc263.c
+++ b/drivers/staging/comedi/drivers/amplc_pc263.c
@@ -323,6 +323,8 @@
{
const struct pc263_board *thisboard = comedi_board(dev);
+ if (!thisboard)
+ return;
if (is_isa_board(thisboard)) {
if (dev->iobase)
release_region(dev->iobase, PC263_IO_SIZE);
diff --git a/drivers/staging/comedi/drivers/das08.c b/drivers/staging/comedi/drivers/das08.c
index 5fd21fa..c304528 100644
--- a/drivers/staging/comedi/drivers/das08.c
+++ b/drivers/staging/comedi/drivers/das08.c
@@ -846,6 +846,8 @@
{
const struct das08_board_struct *thisboard = comedi_board(dev);
+ if (!thisboard)
+ return;
das08_common_detach(dev);
if (is_isa_board(thisboard)) {
if (dev->iobase)
diff --git a/drivers/staging/comedi/drivers/ni_daq_700.c b/drivers/staging/comedi/drivers/ni_daq_700.c
index 2ba0ade4..68d7c6a 100644
--- a/drivers/staging/comedi/drivers/ni_daq_700.c
+++ b/drivers/staging/comedi/drivers/ni_daq_700.c
@@ -95,7 +95,7 @@
}
data[1] = s->state & 0xff;
- data[1] |= inb(dev->iobase + DIO_R);
+ data[1] |= inb(dev->iobase + DIO_R) << 8;
return insn->n;
}
diff --git a/drivers/staging/comedi/drivers/ni_labpc.c b/drivers/staging/comedi/drivers/ni_labpc.c
index 28b91a6..b5a19a0 100644
--- a/drivers/staging/comedi/drivers/ni_labpc.c
+++ b/drivers/staging/comedi/drivers/ni_labpc.c
@@ -772,6 +772,8 @@
{
struct comedi_subdevice *s;
+ if (!thisboard)
+ return;
if (dev->subdevices) {
s = &dev->subdevices[2];
subdev_8255_cleanup(dev, s);
diff --git a/drivers/staging/iio/accel/adis16201_core.c b/drivers/staging/iio/accel/adis16201_core.c
index 8e37d6e..b12ca68 100644
--- a/drivers/staging/iio/accel/adis16201_core.c
+++ b/drivers/staging/iio/accel/adis16201_core.c
@@ -310,30 +310,32 @@
case IIO_CHAN_INFO_SCALE:
switch (chan->type) {
case IIO_VOLTAGE:
- *val = 0;
- if (chan->channel == 0)
- *val2 = 1220;
- else
- *val2 = 610;
+ if (chan->channel == 0) {
+ *val = 1;
+ *val2 = 220000; /* 1.22 mV */
+ } else {
+ *val = 0;
+ *val2 = 610000; /* 0.610 mV */
+ }
return IIO_VAL_INT_PLUS_MICRO;
case IIO_TEMP:
- *val = 0;
- *val2 = -470000;
+ *val = -470; /* 0.47 C */
+ *val2 = 0;
return IIO_VAL_INT_PLUS_MICRO;
case IIO_ACCEL:
*val = 0;
- *val2 = 462500;
- return IIO_VAL_INT_PLUS_MICRO;
+ *val2 = IIO_G_TO_M_S_2(462400); /* 0.4624 mg */
+ return IIO_VAL_INT_PLUS_NANO;
case IIO_INCLI:
*val = 0;
- *val2 = 100000;
+ *val2 = 100000; /* 0.1 degree */
return IIO_VAL_INT_PLUS_MICRO;
default:
return -EINVAL;
}
break;
case IIO_CHAN_INFO_OFFSET:
- *val = 25;
+ *val = 25000 / -470 - 1278; /* 25 C = 1278 */
return IIO_VAL_INT;
case IIO_CHAN_INFO_CALIBBIAS:
switch (chan->type) {
diff --git a/drivers/staging/iio/accel/adis16203_core.c b/drivers/staging/iio/accel/adis16203_core.c
index 002fa9d..e7b3441 100644
--- a/drivers/staging/iio/accel/adis16203_core.c
+++ b/drivers/staging/iio/accel/adis16203_core.c
@@ -316,25 +316,27 @@
case IIO_CHAN_INFO_SCALE:
switch (chan->type) {
case IIO_VOLTAGE:
- *val = 0;
- if (chan->channel == 0)
- *val2 = 1220;
- else
- *val2 = 610;
+ if (chan->channel == 0) {
+ *val = 1;
+ *val2 = 220000; /* 1.22 mV */
+ } else {
+ *val = 0;
+ *val2 = 610000; /* 0.61 mV */
+ }
return IIO_VAL_INT_PLUS_MICRO;
case IIO_TEMP:
- *val = 0;
- *val2 = -470000;
+ *val = -470; /* -0.47 C */
+ *val2 = 0;
return IIO_VAL_INT_PLUS_MICRO;
case IIO_INCLI:
*val = 0;
- *val2 = 25000;
+ *val2 = 25000; /* 0.025 degree */
return IIO_VAL_INT_PLUS_MICRO;
default:
return -EINVAL;
}
case IIO_CHAN_INFO_OFFSET:
- *val = 25;
+ *val = 25000 / -470 - 1278; /* 25 C = 1278 */
return IIO_VAL_INT;
case IIO_CHAN_INFO_CALIBBIAS:
bits = 14;
diff --git a/drivers/staging/iio/accel/adis16204_core.c b/drivers/staging/iio/accel/adis16204_core.c
index 05bdb7c..c6234c2 100644
--- a/drivers/staging/iio/accel/adis16204_core.c
+++ b/drivers/staging/iio/accel/adis16204_core.c
@@ -317,26 +317,28 @@
case IIO_CHAN_INFO_SCALE:
switch (chan->type) {
case IIO_VOLTAGE:
- *val = 0;
- if (chan->channel == 0)
- *val2 = 1220;
- else
- *val2 = 610;
+ if (chan->channel == 0) {
+ *val = 1;
+ *val2 = 220000; /* 1.22 mV */
+ } else {
+ *val = 0;
+ *val2 = 610000; /* 0.61 mV */
+ }
return IIO_VAL_INT_PLUS_MICRO;
case IIO_TEMP:
- *val = 0;
- *val2 = -470000;
+ *val = -470; /* 0.47 C */
+ *val2 = 0;
return IIO_VAL_INT_PLUS_MICRO;
case IIO_ACCEL:
*val = 0;
switch (chan->channel2) {
case IIO_MOD_X:
case IIO_MOD_ROOT_SUM_SQUARED_X_Y:
- *val2 = 17125;
+ *val2 = IIO_G_TO_M_S_2(17125); /* 17.125 mg */
break;
case IIO_MOD_Y:
case IIO_MOD_Z:
- *val2 = 8407;
+ *val2 = IIO_G_TO_M_S_2(8407); /* 8.407 mg */
break;
}
return IIO_VAL_INT_PLUS_MICRO;
@@ -345,7 +347,7 @@
}
break;
case IIO_CHAN_INFO_OFFSET:
- *val = 25;
+ *val = 25000 / -470 - 1278; /* 25 C = 1278 */
return IIO_VAL_INT;
case IIO_CHAN_INFO_CALIBBIAS:
case IIO_CHAN_INFO_PEAK:
diff --git a/drivers/staging/iio/accel/adis16209_core.c b/drivers/staging/iio/accel/adis16209_core.c
index b7333bf..7ee974b 100644
--- a/drivers/staging/iio/accel/adis16209_core.c
+++ b/drivers/staging/iio/accel/adis16209_core.c
@@ -343,28 +343,29 @@
case IIO_VOLTAGE:
*val = 0;
if (chan->channel == 0)
- *val2 = 305180;
+ *val2 = 305180; /* 0.30518 mV */
else
- *val2 = 610500;
+ *val2 = 610500; /* 0.6105 mV */
return IIO_VAL_INT_PLUS_MICRO;
case IIO_TEMP:
- *val = 0;
- *val2 = -470000;
+ *val = -470; /* -0.47 C */
+ *val2 = 0;
return IIO_VAL_INT_PLUS_MICRO;
case IIO_ACCEL:
*val = 0;
- *val2 = 2394;
- return IIO_VAL_INT_PLUS_MICRO;
+ *val2 = IIO_G_TO_M_S_2(244140); /* 0.244140 mg */
+ return IIO_VAL_INT_PLUS_NANO;
case IIO_INCLI:
+ case IIO_ROT:
*val = 0;
- *val2 = 436;
+ *val2 = 25000; /* 0.025 degree */
return IIO_VAL_INT_PLUS_MICRO;
default:
return -EINVAL;
}
break;
case IIO_CHAN_INFO_OFFSET:
- *val = 25;
+ *val = 25000 / -470 - 0x4FE; /* 25 C = 0x4FE */
return IIO_VAL_INT;
case IIO_CHAN_INFO_CALIBBIAS:
switch (chan->type) {
@@ -491,6 +492,7 @@
.modified = 1,
.channel2 = IIO_MOD_X,
.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,
+ IIO_CHAN_INFO_SCALE_SHARED_BIT,
.address = rot,
.scan_index = ADIS16209_SCAN_ROT,
.scan_type = {
diff --git a/drivers/staging/iio/accel/adis16220_core.c b/drivers/staging/iio/accel/adis16220_core.c
index c755089..eaadd9d 100644
--- a/drivers/staging/iio/accel/adis16220_core.c
+++ b/drivers/staging/iio/accel/adis16220_core.c
@@ -486,7 +486,7 @@
break;
case IIO_CHAN_INFO_OFFSET:
if (chan->type == IIO_TEMP) {
- *val = 25;
+ *val = 25000 / -470 - 1278; /* 25 C = 1278 */
return IIO_VAL_INT;
}
addrind = 1;
@@ -495,19 +495,22 @@
addrind = 2;
break;
case IIO_CHAN_INFO_SCALE:
- *val = 0;
switch (chan->type) {
case IIO_TEMP:
- *val2 = -470000;
+ *val = -470; /* -0.47 C */
+ *val2 = 0;
return IIO_VAL_INT_PLUS_MICRO;
case IIO_ACCEL:
- *val2 = 1887042;
+ *val2 = IIO_G_TO_M_S_2(19073); /* 19.073 g */
return IIO_VAL_INT_PLUS_MICRO;
case IIO_VOLTAGE:
- if (chan->channel == 0)
- *val2 = 0012221;
- else /* Should really be dependent on VDD */
- *val2 = 305;
+ if (chan->channel == 0) {
+ *val = 1;
+ *val2 = 220700; /* 1.2207 mV */
+ } else {
+ /* Should really be dependent on VDD */
+ *val2 = 305180; /* 305.18 uV */
+ }
return IIO_VAL_INT_PLUS_MICRO;
default:
return -EINVAL;
diff --git a/drivers/staging/iio/accel/adis16240_core.c b/drivers/staging/iio/accel/adis16240_core.c
index 0fc26a49..35e0939 100644
--- a/drivers/staging/iio/accel/adis16240_core.c
+++ b/drivers/staging/iio/accel/adis16240_core.c
@@ -373,30 +373,31 @@
case IIO_CHAN_INFO_SCALE:
switch (chan->type) {
case IIO_VOLTAGE:
- *val = 0;
- if (chan->channel == 0)
- *val2 = 4880;
- else
+ if (chan->channel == 0) {
+ *val = 4;
+ *val2 = 880000; /* 4.88 mV */
+ return IIO_VAL_INT_PLUS_MICRO;
+ } else {
return -EINVAL;
- return IIO_VAL_INT_PLUS_MICRO;
+ }
case IIO_TEMP:
- *val = 0;
- *val2 = 244000;
+ *val = 244; /* 0.244 C */
+ *val2 = 0;
return IIO_VAL_INT_PLUS_MICRO;
case IIO_ACCEL:
*val = 0;
- *val2 = 504062;
+ *val2 = IIO_G_TO_M_S_2(51400); /* 51.4 mg */
return IIO_VAL_INT_PLUS_MICRO;
default:
return -EINVAL;
}
break;
case IIO_CHAN_INFO_PEAK_SCALE:
- *val = 6;
- *val2 = 629295;
+ *val = 0;
+ *val2 = IIO_G_TO_M_S_2(51400); /* 51.4 mg */
return IIO_VAL_INT_PLUS_MICRO;
case IIO_CHAN_INFO_OFFSET:
- *val = 25;
+ *val = 25000 / 244 - 0x133; /* 25 C = 0x133 */
return IIO_VAL_INT;
case IIO_CHAN_INFO_CALIBBIAS:
bits = 10;
diff --git a/drivers/staging/iio/gyro/adis16260_core.c b/drivers/staging/iio/gyro/adis16260_core.c
index 9571c03..aa964a2 100644
--- a/drivers/staging/iio/gyro/adis16260_core.c
+++ b/drivers/staging/iio/gyro/adis16260_core.c
@@ -498,28 +498,33 @@
switch (chan->type) {
case IIO_ANGL_VEL:
*val = 0;
- if (spi_get_device_id(st->us)->driver_data)
- *val2 = 320;
- else
- *val2 = 1278;
+ if (spi_get_device_id(st->us)->driver_data) {
+ /* 0.01832 degree / sec */
+ *val2 = IIO_DEGREE_TO_RAD(18320);
+ } else {
+ /* 0.07326 degree / sec */
+ *val2 = IIO_DEGREE_TO_RAD(73260);
+ }
return IIO_VAL_INT_PLUS_MICRO;
case IIO_VOLTAGE:
- *val = 0;
- if (chan->channel == 0)
- *val2 = 18315;
- else
- *val2 = 610500;
+ if (chan->channel == 0) {
+ *val = 1;
+ *val2 = 831500; /* 1.8315 mV */
+ } else {
+ *val = 0;
+ *val2 = 610500; /* 610.5 uV */
+ }
return IIO_VAL_INT_PLUS_MICRO;
case IIO_TEMP:
- *val = 0;
- *val2 = 145300;
+ *val = 145;
+ *val2 = 300000; /* 0.1453 C */
return IIO_VAL_INT_PLUS_MICRO;
default:
return -EINVAL;
}
break;
case IIO_CHAN_INFO_OFFSET:
- *val = 25;
+ *val = 250000 / 1453; /* 25 C = 0x00 */
return IIO_VAL_INT;
case IIO_CHAN_INFO_CALIBBIAS:
switch (chan->type) {
diff --git a/drivers/staging/iio/imu/adis16400.h b/drivers/staging/iio/imu/adis16400.h
index d59d7ac..77c601d 100644
--- a/drivers/staging/iio/imu/adis16400.h
+++ b/drivers/staging/iio/imu/adis16400.h
@@ -139,6 +139,8 @@
const long flags;
unsigned int gyro_scale_micro;
unsigned int accel_scale_micro;
+ int temp_scale_nano;
+ int temp_offset;
unsigned long default_scan_mask;
};
diff --git a/drivers/staging/iio/imu/adis16400_core.c b/drivers/staging/iio/imu/adis16400_core.c
index b302c9b..3144a7b 100644
--- a/drivers/staging/iio/imu/adis16400_core.c
+++ b/drivers/staging/iio/imu/adis16400_core.c
@@ -553,10 +553,13 @@
return IIO_VAL_INT_PLUS_MICRO;
case IIO_VOLTAGE:
*val = 0;
- if (chan->channel == 0)
- *val2 = 2418;
- else
- *val2 = 806;
+ if (chan->channel == 0) {
+ *val = 2;
+ *val2 = 418000; /* 2.418 mV */
+ } else {
+ *val = 0;
+ *val2 = 805800; /* 805.8 uV */
+ }
return IIO_VAL_INT_PLUS_MICRO;
case IIO_ACCEL:
*val = 0;
@@ -564,11 +567,11 @@
return IIO_VAL_INT_PLUS_MICRO;
case IIO_MAGN:
*val = 0;
- *val2 = 500;
+ *val2 = 500; /* 0.5 mgauss */
return IIO_VAL_INT_PLUS_MICRO;
case IIO_TEMP:
- *val = 0;
- *val2 = 140000;
+ *val = st->variant->temp_scale_nano / 1000000;
+ *val2 = (st->variant->temp_scale_nano % 1000000);
return IIO_VAL_INT_PLUS_MICRO;
default:
return -EINVAL;
@@ -586,9 +589,8 @@
return IIO_VAL_INT;
case IIO_CHAN_INFO_OFFSET:
/* currently only temperature */
- *val = 198;
- *val2 = 160000;
- return IIO_VAL_INT_PLUS_MICRO;
+ *val = st->variant->temp_offset;
+ return IIO_VAL_INT;
case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
mutex_lock(&indio_dev->mlock);
/* Need both the number of taps and the sampling frequency */
@@ -1035,7 +1037,7 @@
.indexed = 1,
.channel = 0,
.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
- IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT |
+ IIO_CHAN_INFO_OFFSET_SEPARATE_BIT |
IIO_CHAN_INFO_SCALE_SHARED_BIT,
.address = temp0,
.scan_index = ADIS16400_SCAN_TEMP,
@@ -1058,8 +1060,10 @@
[ADIS16300] = {
.channels = adis16300_channels,
.num_channels = ARRAY_SIZE(adis16300_channels),
- .gyro_scale_micro = 873,
+ .gyro_scale_micro = IIO_DEGREE_TO_RAD(50000), /* 0.05 deg/s */
.accel_scale_micro = 5884,
+ .temp_scale_nano = 140000000, /* 0.14 C */
+ .temp_offset = 25000000 / 140000, /* 25 C = 0x00 */
.default_scan_mask = (1 << ADIS16400_SCAN_SUPPLY) |
(1 << ADIS16400_SCAN_GYRO_X) | (1 << ADIS16400_SCAN_ACC_X) |
(1 << ADIS16400_SCAN_ACC_Y) | (1 << ADIS16400_SCAN_ACC_Z) |
@@ -1070,8 +1074,10 @@
[ADIS16334] = {
.channels = adis16334_channels,
.num_channels = ARRAY_SIZE(adis16334_channels),
- .gyro_scale_micro = 873,
- .accel_scale_micro = 981,
+ .gyro_scale_micro = IIO_DEGREE_TO_RAD(50000), /* 0.05 deg/s */
+ .accel_scale_micro = IIO_G_TO_M_S_2(1000), /* 1 mg */
+ .temp_scale_nano = 67850000, /* 0.06785 C */
+ .temp_offset = 25000000 / 67850, /* 25 C = 0x00 */
.default_scan_mask = (1 << ADIS16400_SCAN_GYRO_X) |
(1 << ADIS16400_SCAN_GYRO_Y) | (1 << ADIS16400_SCAN_GYRO_Z) |
(1 << ADIS16400_SCAN_ACC_X) | (1 << ADIS16400_SCAN_ACC_Y) |
@@ -1080,8 +1086,10 @@
[ADIS16350] = {
.channels = adis16350_channels,
.num_channels = ARRAY_SIZE(adis16350_channels),
- .gyro_scale_micro = 872664,
- .accel_scale_micro = 24732,
+ .gyro_scale_micro = IIO_DEGREE_TO_RAD(73260), /* 0.07326 deg/s */
+ .accel_scale_micro = IIO_G_TO_M_S_2(2522), /* 0.002522 g */
+ .temp_scale_nano = 145300000, /* 0.1453 C */
+ .temp_offset = 25000000 / 145300, /* 25 C = 0x00 */
.default_scan_mask = 0x7FF,
.flags = ADIS16400_NO_BURST,
},
@@ -1090,8 +1098,10 @@
.num_channels = ARRAY_SIZE(adis16350_channels),
.flags = ADIS16400_HAS_PROD_ID,
.product_id = 0x3FE8,
- .gyro_scale_micro = 1279,
- .accel_scale_micro = 24732,
+ .gyro_scale_micro = IIO_DEGREE_TO_RAD(50000), /* 0.05 deg/s */
+ .accel_scale_micro = IIO_G_TO_M_S_2(3333), /* 3.333 mg */
+ .temp_scale_nano = 136000000, /* 0.136 C */
+ .temp_offset = 25000000 / 136000, /* 25 C = 0x00 */
.default_scan_mask = 0x7FF,
},
[ADIS16362] = {
@@ -1099,8 +1109,10 @@
.num_channels = ARRAY_SIZE(adis16350_channels),
.flags = ADIS16400_HAS_PROD_ID,
.product_id = 0x3FEA,
- .gyro_scale_micro = 1279,
- .accel_scale_micro = 24732,
+ .gyro_scale_micro = IIO_DEGREE_TO_RAD(50000), /* 0.05 deg/s */
+ .accel_scale_micro = IIO_G_TO_M_S_2(333), /* 0.333 mg */
+ .temp_scale_nano = 136000000, /* 0.136 C */
+ .temp_offset = 25000000 / 136000, /* 25 C = 0x00 */
.default_scan_mask = 0x7FF,
},
[ADIS16364] = {
@@ -1108,8 +1120,10 @@
.num_channels = ARRAY_SIZE(adis16350_channels),
.flags = ADIS16400_HAS_PROD_ID,
.product_id = 0x3FEC,
- .gyro_scale_micro = 1279,
- .accel_scale_micro = 24732,
+ .gyro_scale_micro = IIO_DEGREE_TO_RAD(50000), /* 0.05 deg/s */
+ .accel_scale_micro = IIO_G_TO_M_S_2(1000), /* 1 mg */
+ .temp_scale_nano = 136000000, /* 0.136 C */
+ .temp_offset = 25000000 / 136000, /* 25 C = 0x00 */
.default_scan_mask = 0x7FF,
},
[ADIS16365] = {
@@ -1117,8 +1131,10 @@
.num_channels = ARRAY_SIZE(adis16350_channels),
.flags = ADIS16400_HAS_PROD_ID,
.product_id = 0x3FED,
- .gyro_scale_micro = 1279,
- .accel_scale_micro = 24732,
+ .gyro_scale_micro = IIO_DEGREE_TO_RAD(50000), /* 0.05 deg/s */
+ .accel_scale_micro = IIO_G_TO_M_S_2(1000), /* 1 mg */
+ .temp_scale_nano = 136000000, /* 0.136 C */
+ .temp_offset = 25000000 / 136000, /* 25 C = 0x00 */
.default_scan_mask = 0x7FF,
},
[ADIS16400] = {
@@ -1126,9 +1142,11 @@
.num_channels = ARRAY_SIZE(adis16400_channels),
.flags = ADIS16400_HAS_PROD_ID,
.product_id = 0x4015,
- .gyro_scale_micro = 873,
- .accel_scale_micro = 32656,
+ .gyro_scale_micro = IIO_DEGREE_TO_RAD(50000), /* 0.05 deg/s */
+ .accel_scale_micro = IIO_G_TO_M_S_2(3333), /* 3.333 mg */
.default_scan_mask = 0xFFF,
+ .temp_scale_nano = 140000000, /* 0.14 C */
+ .temp_offset = 25000000 / 140000, /* 25 C = 0x00 */
}
};
diff --git a/drivers/staging/ipack/bridges/tpci200.c b/drivers/staging/ipack/bridges/tpci200.c
index bb8aa70..46d6657 100644
--- a/drivers/staging/ipack/bridges/tpci200.c
+++ b/drivers/staging/ipack/bridges/tpci200.c
@@ -12,6 +12,7 @@
*/
#include <linux/module.h>
+#include <linux/slab.h>
#include "tpci200.h"
static u16 tpci200_status_timeout[] = {
diff --git a/drivers/staging/nvec/nvec.c b/drivers/staging/nvec/nvec.c
index 094fdc3..97cdf08 100644
--- a/drivers/staging/nvec/nvec.c
+++ b/drivers/staging/nvec/nvec.c
@@ -39,7 +39,6 @@
#include <linux/workqueue.h>
#include <mach/clk.h>
-#include <mach/iomap.h>
#include "nvec.h"
diff --git a/drivers/staging/omapdrm/omap_gem.c b/drivers/staging/omapdrm/omap_gem.c
index 3434e6e..66e2c2f 100644
--- a/drivers/staging/omapdrm/omap_gem.c
+++ b/drivers/staging/omapdrm/omap_gem.c
@@ -246,7 +246,7 @@
* DSS, GPU, etc. are not cache coherent:
*/
if (omap_obj->flags & (OMAP_BO_WC|OMAP_BO_UNCACHED)) {
- addrs = kmalloc(npages * sizeof(addrs), GFP_KERNEL);
+ addrs = kmalloc(npages * sizeof(*addrs), GFP_KERNEL);
if (!addrs) {
ret = -ENOMEM;
goto free_pages;
@@ -257,7 +257,7 @@
0, PAGE_SIZE, DMA_BIDIRECTIONAL);
}
} else {
- addrs = kzalloc(npages * sizeof(addrs), GFP_KERNEL);
+ addrs = kzalloc(npages * sizeof(*addrs), GFP_KERNEL);
if (!addrs) {
ret = -ENOMEM;
goto free_pages;
diff --git a/drivers/staging/ramster/Kconfig b/drivers/staging/ramster/Kconfig
index 843c541..3abf661 100644
--- a/drivers/staging/ramster/Kconfig
+++ b/drivers/staging/ramster/Kconfig
@@ -18,6 +18,7 @@
config RAMSTER
bool "Cross-machine RAM capacity sharing, aka peer-to-peer tmem"
depends on CONFIGFS_FS=y && SYSFS=y && !HIGHMEM && ZCACHE2=y
+ depends on NET
# must ensure struct page is 8-byte aligned
select HAVE_ALIGNED_STRUCT_PAGE if !64_BIT
default n
diff --git a/drivers/staging/tidspbridge/core/tiomap3430.c b/drivers/staging/tidspbridge/core/tiomap3430.c
index 066a3ce..f619fb3 100644
--- a/drivers/staging/tidspbridge/core/tiomap3430.c
+++ b/drivers/staging/tidspbridge/core/tiomap3430.c
@@ -126,7 +126,8 @@
u32 ul_num_bytes,
struct hw_mmu_map_attrs_t *hw_attrs);
-bool wait_for_start(struct bridge_dev_context *dev_context, u32 dw_sync_addr);
+bool wait_for_start(struct bridge_dev_context *dev_context,
+ void __iomem *sync_addr);
/* ----------------------------------- Globals */
@@ -363,10 +364,11 @@
{
int status = 0;
struct bridge_dev_context *dev_context = dev_ctxt;
- u32 dw_sync_addr = 0;
+ void __iomem *sync_addr;
u32 ul_shm_base; /* Gpp Phys SM base addr(byte) */
u32 ul_shm_base_virt; /* Dsp Virt SM base addr */
u32 ul_tlb_base_virt; /* Base of MMU TLB entry */
+ u32 shm_sync_pa;
/* Offset of shm_base_virt from tlb_base_virt */
u32 ul_shm_offset_virt;
s32 entry_ndx;
@@ -397,15 +399,22 @@
/* Kernel logical address */
ul_shm_base = dev_context->atlb_entry[0].gpp_va + ul_shm_offset_virt;
+ /* SHM physical sync address */
+ shm_sync_pa = dev_context->atlb_entry[0].gpp_pa + ul_shm_offset_virt +
+ SHMSYNCOFFSET;
+
/* 2nd wd is used as sync field */
- dw_sync_addr = ul_shm_base + SHMSYNCOFFSET;
+ sync_addr = ioremap(shm_sync_pa, SZ_32);
+ if (!sync_addr)
+ return -ENOMEM;
+
/* Write a signature into the shm base + offset; this will
* get cleared when the DSP program starts. */
if ((ul_shm_base_virt == 0) || (ul_shm_base == 0)) {
pr_err("%s: Illegal SM base\n", __func__);
status = -EPERM;
} else
- __raw_writel(0xffffffff, dw_sync_addr);
+ __raw_writel(0xffffffff, sync_addr);
if (!status) {
resources = dev_context->resources;
@@ -419,8 +428,10 @@
* function is made available.
*/
void __iomem *ctrl = ioremap(0x48002000, SZ_4K);
- if (!ctrl)
+ if (!ctrl) {
+ iounmap(sync_addr);
return -ENOMEM;
+ }
(*pdata->dsp_prm_rmw_bits)(OMAP3430_RST1_IVA2_MASK,
OMAP3430_RST1_IVA2_MASK, OMAP3430_IVA2_MOD,
@@ -588,15 +599,15 @@
(*pdata->dsp_prm_rmw_bits)(OMAP3430_RST1_IVA2_MASK, 0,
OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
- dev_dbg(bridge, "Waiting for Sync @ 0x%x\n", dw_sync_addr);
+ dev_dbg(bridge, "Waiting for Sync @ 0x%x\n", *(u32 *)sync_addr);
dev_dbg(bridge, "DSP c_int00 Address = 0x%x\n", dsp_addr);
if (dsp_debug)
- while (__raw_readw(dw_sync_addr))
+ while (__raw_readw(sync_addr))
;
/* Wait for DSP to clear word in shared memory */
/* Read the Location */
- if (!wait_for_start(dev_context, dw_sync_addr))
+ if (!wait_for_start(dev_context, sync_addr))
status = -ETIMEDOUT;
dev_get_symbol(dev_context->dev_obj, "_WDT_enable", &wdt_en);
@@ -612,7 +623,7 @@
/* Write the synchronization bit to indicate the
* completion of OPP table update to DSP
*/
- __raw_writel(0XCAFECAFE, dw_sync_addr);
+ __raw_writel(0XCAFECAFE, sync_addr);
/* update board state */
dev_context->brd_state = BRD_RUNNING;
@@ -621,6 +632,9 @@
dev_context->brd_state = BRD_UNKNOWN;
}
}
+
+ iounmap(sync_addr);
+
return status;
}
@@ -1796,12 +1810,13 @@
* ======== wait_for_start ========
* Wait for the singal from DSP that it has started, or time out.
*/
-bool wait_for_start(struct bridge_dev_context *dev_context, u32 dw_sync_addr)
+bool wait_for_start(struct bridge_dev_context *dev_context,
+ void __iomem *sync_addr)
{
u16 timeout = TIHELEN_ACKTIMEOUT;
/* Wait for response from board */
- while (__raw_readw(dw_sync_addr) && --timeout)
+ while (__raw_readw(sync_addr) && --timeout)
udelay(10);
/* If timed out: return false */
diff --git a/drivers/staging/tidspbridge/hw/hw_mmu.c b/drivers/staging/tidspbridge/hw/hw_mmu.c
index 71cb822..50244a4 100644
--- a/drivers/staging/tidspbridge/hw/hw_mmu.c
+++ b/drivers/staging/tidspbridge/hw/hw_mmu.c
@@ -48,37 +48,12 @@
};
/*
- * FUNCTION : mmu_flush_entry
- *
- * INPUTS:
- *
- * Identifier : base_address
- * Type : const u32
- * Description : Base Address of instance of MMU module
- *
- * RETURNS:
- *
- * Type : hw_status
- * Description : 0 -- No errors occurred
- * RET_BAD_NULL_PARAM -- A Pointer
- * Parameter was set to NULL
- *
- * PURPOSE: : Flush the TLB entry pointed by the
- * lock counter register
- * even if this entry is set protected
- *
- * METHOD: : Check the Input parameter and Flush a
- * single entry in the TLB.
- */
-static hw_status mmu_flush_entry(const void __iomem *base_address);
-
-/*
* FUNCTION : mmu_set_cam_entry
*
* INPUTS:
*
* Identifier : base_address
- * TypE : const u32
+ * Type : void __iomem *
* Description : Base Address of instance of MMU module
*
* Identifier : page_sz
@@ -112,7 +87,7 @@
*
* METHOD: : Check the Input parameters and set the CAM entry.
*/
-static hw_status mmu_set_cam_entry(const void __iomem *base_address,
+static hw_status mmu_set_cam_entry(void __iomem *base_address,
const u32 page_sz,
const u32 preserved_bit,
const u32 valid_bit,
@@ -124,7 +99,7 @@
* INPUTS:
*
* Identifier : base_address
- * Type : const u32
+ * Type : void __iomem *
* Description : Base Address of instance of MMU module
*
* Identifier : physical_addr
@@ -157,7 +132,7 @@
*
* METHOD: : Check the Input parameters and set the RAM entry.
*/
-static hw_status mmu_set_ram_entry(const void __iomem *base_address,
+static hw_status mmu_set_ram_entry(void __iomem *base_address,
const u32 physical_addr,
enum hw_endianism_t endianism,
enum hw_element_size_t element_size,
@@ -165,7 +140,7 @@
/* HW FUNCTIONS */
-hw_status hw_mmu_enable(const void __iomem *base_address)
+hw_status hw_mmu_enable(void __iomem *base_address)
{
hw_status status = 0;
@@ -174,7 +149,7 @@
return status;
}
-hw_status hw_mmu_disable(const void __iomem *base_address)
+hw_status hw_mmu_disable(void __iomem *base_address)
{
hw_status status = 0;
@@ -183,7 +158,7 @@
return status;
}
-hw_status hw_mmu_num_locked_set(const void __iomem *base_address,
+hw_status hw_mmu_num_locked_set(void __iomem *base_address,
u32 num_locked_entries)
{
hw_status status = 0;
@@ -193,7 +168,7 @@
return status;
}
-hw_status hw_mmu_victim_num_set(const void __iomem *base_address,
+hw_status hw_mmu_victim_num_set(void __iomem *base_address,
u32 victim_entry_num)
{
hw_status status = 0;
@@ -203,7 +178,7 @@
return status;
}
-hw_status hw_mmu_event_ack(const void __iomem *base_address, u32 irq_mask)
+hw_status hw_mmu_event_ack(void __iomem *base_address, u32 irq_mask)
{
hw_status status = 0;
@@ -212,7 +187,7 @@
return status;
}
-hw_status hw_mmu_event_disable(const void __iomem *base_address, u32 irq_mask)
+hw_status hw_mmu_event_disable(void __iomem *base_address, u32 irq_mask)
{
hw_status status = 0;
u32 irq_reg;
@@ -224,7 +199,7 @@
return status;
}
-hw_status hw_mmu_event_enable(const void __iomem *base_address, u32 irq_mask)
+hw_status hw_mmu_event_enable(void __iomem *base_address, u32 irq_mask)
{
hw_status status = 0;
u32 irq_reg;
@@ -236,7 +211,7 @@
return status;
}
-hw_status hw_mmu_event_status(const void __iomem *base_address, u32 *irq_mask)
+hw_status hw_mmu_event_status(void __iomem *base_address, u32 *irq_mask)
{
hw_status status = 0;
@@ -245,7 +220,7 @@
return status;
}
-hw_status hw_mmu_fault_addr_read(const void __iomem *base_address, u32 *addr)
+hw_status hw_mmu_fault_addr_read(void __iomem *base_address, u32 *addr)
{
hw_status status = 0;
@@ -255,7 +230,7 @@
return status;
}
-hw_status hw_mmu_ttb_set(const void __iomem *base_address, u32 ttb_phys_addr)
+hw_status hw_mmu_ttb_set(void __iomem *base_address, u32 ttb_phys_addr)
{
hw_status status = 0;
u32 load_ttb;
@@ -267,7 +242,7 @@
return status;
}
-hw_status hw_mmu_twl_enable(const void __iomem *base_address)
+hw_status hw_mmu_twl_enable(void __iomem *base_address)
{
hw_status status = 0;
@@ -276,7 +251,7 @@
return status;
}
-hw_status hw_mmu_twl_disable(const void __iomem *base_address)
+hw_status hw_mmu_twl_disable(void __iomem *base_address)
{
hw_status status = 0;
@@ -285,45 +260,7 @@
return status;
}
-hw_status hw_mmu_tlb_flush(const void __iomem *base_address, u32 virtual_addr,
- u32 page_sz)
-{
- hw_status status = 0;
- u32 virtual_addr_tag;
- enum hw_mmu_page_size_t pg_size_bits;
-
- switch (page_sz) {
- case HW_PAGE_SIZE4KB:
- pg_size_bits = HW_MMU_SMALL_PAGE;
- break;
-
- case HW_PAGE_SIZE64KB:
- pg_size_bits = HW_MMU_LARGE_PAGE;
- break;
-
- case HW_PAGE_SIZE1MB:
- pg_size_bits = HW_MMU_SECTION;
- break;
-
- case HW_PAGE_SIZE16MB:
- pg_size_bits = HW_MMU_SUPERSECTION;
- break;
-
- default:
- return -EINVAL;
- }
-
- /* Generate the 20-bit tag from virtual address */
- virtual_addr_tag = ((virtual_addr & MMU_ADDR_MASK) >> 12);
-
- mmu_set_cam_entry(base_address, pg_size_bits, 0, 0, virtual_addr_tag);
-
- mmu_flush_entry(base_address);
-
- return status;
-}
-
-hw_status hw_mmu_tlb_add(const void __iomem *base_address,
+hw_status hw_mmu_tlb_add(void __iomem *base_address,
u32 physical_addr,
u32 virtual_addr,
u32 page_sz,
@@ -503,20 +440,8 @@
return status;
}
-/* mmu_flush_entry */
-static hw_status mmu_flush_entry(const void __iomem *base_address)
-{
- hw_status status = 0;
- u32 flush_entry_data = 0x1;
-
- /* write values to register */
- MMUMMU_FLUSH_ENTRY_WRITE_REGISTER32(base_address, flush_entry_data);
-
- return status;
-}
-
/* mmu_set_cam_entry */
-static hw_status mmu_set_cam_entry(const void __iomem *base_address,
+static hw_status mmu_set_cam_entry(void __iomem *base_address,
const u32 page_sz,
const u32 preserved_bit,
const u32 valid_bit,
@@ -536,7 +461,7 @@
}
/* mmu_set_ram_entry */
-static hw_status mmu_set_ram_entry(const void __iomem *base_address,
+static hw_status mmu_set_ram_entry(void __iomem *base_address,
const u32 physical_addr,
enum hw_endianism_t endianism,
enum hw_element_size_t element_size,
@@ -556,7 +481,7 @@
}
-void hw_mmu_tlb_flush_all(const void __iomem *base)
+void hw_mmu_tlb_flush_all(void __iomem *base)
{
__raw_writel(1, base + MMU_GFLUSH);
}
diff --git a/drivers/staging/tidspbridge/hw/hw_mmu.h b/drivers/staging/tidspbridge/hw/hw_mmu.h
index 1458a2c..1c50bb3 100644
--- a/drivers/staging/tidspbridge/hw/hw_mmu.h
+++ b/drivers/staging/tidspbridge/hw/hw_mmu.h
@@ -42,44 +42,41 @@
bool donotlockmpupage;
};
-extern hw_status hw_mmu_enable(const void __iomem *base_address);
+extern hw_status hw_mmu_enable(void __iomem *base_address);
-extern hw_status hw_mmu_disable(const void __iomem *base_address);
+extern hw_status hw_mmu_disable(void __iomem *base_address);
-extern hw_status hw_mmu_num_locked_set(const void __iomem *base_address,
+extern hw_status hw_mmu_num_locked_set(void __iomem *base_address,
u32 num_locked_entries);
-extern hw_status hw_mmu_victim_num_set(const void __iomem *base_address,
+extern hw_status hw_mmu_victim_num_set(void __iomem *base_address,
u32 victim_entry_num);
/* For MMU faults */
-extern hw_status hw_mmu_event_ack(const void __iomem *base_address,
+extern hw_status hw_mmu_event_ack(void __iomem *base_address,
u32 irq_mask);
-extern hw_status hw_mmu_event_disable(const void __iomem *base_address,
+extern hw_status hw_mmu_event_disable(void __iomem *base_address,
u32 irq_mask);
-extern hw_status hw_mmu_event_enable(const void __iomem *base_address,
+extern hw_status hw_mmu_event_enable(void __iomem *base_address,
u32 irq_mask);
-extern hw_status hw_mmu_event_status(const void __iomem *base_address,
+extern hw_status hw_mmu_event_status(void __iomem *base_address,
u32 *irq_mask);
-extern hw_status hw_mmu_fault_addr_read(const void __iomem *base_address,
+extern hw_status hw_mmu_fault_addr_read(void __iomem *base_address,
u32 *addr);
/* Set the TT base address */
-extern hw_status hw_mmu_ttb_set(const void __iomem *base_address,
+extern hw_status hw_mmu_ttb_set(void __iomem *base_address,
u32 ttb_phys_addr);
-extern hw_status hw_mmu_twl_enable(const void __iomem *base_address);
+extern hw_status hw_mmu_twl_enable(void __iomem *base_address);
-extern hw_status hw_mmu_twl_disable(const void __iomem *base_address);
+extern hw_status hw_mmu_twl_disable(void __iomem *base_address);
-extern hw_status hw_mmu_tlb_flush(const void __iomem *base_address,
- u32 virtual_addr, u32 page_sz);
-
-extern hw_status hw_mmu_tlb_add(const void __iomem *base_address,
+extern hw_status hw_mmu_tlb_add(void __iomem *base_address,
u32 physical_addr,
u32 virtual_addr,
u32 page_sz,
@@ -97,7 +94,7 @@
extern hw_status hw_mmu_pte_clear(const u32 pg_tbl_va,
u32 virtual_addr, u32 page_size);
-void hw_mmu_tlb_flush_all(const void __iomem *base);
+void hw_mmu_tlb_flush_all(void __iomem *base);
static inline u32 hw_mmu_pte_addr_l1(u32 l1_base, u32 va)
{
diff --git a/drivers/staging/tidspbridge/include/dspbridge/cfgdefs.h b/drivers/staging/tidspbridge/include/dspbridge/cfgdefs.h
index 60a2781..b32c756 100644
--- a/drivers/staging/tidspbridge/include/dspbridge/cfgdefs.h
+++ b/drivers/staging/tidspbridge/include/dspbridge/cfgdefs.h
@@ -53,8 +53,8 @@
u32 chnl_buf_size;
u32 num_chnls;
void __iomem *per_base;
- u32 per_pm_base;
- u32 core_pm_base;
+ void __iomem *per_pm_base;
+ void __iomem *core_pm_base;
void __iomem *dmmu_base;
};
diff --git a/drivers/staging/tidspbridge/include/dspbridge/host_os.h b/drivers/staging/tidspbridge/include/dspbridge/host_os.h
index ed00d3d..7f3a1db 100644
--- a/drivers/staging/tidspbridge/include/dspbridge/host_os.h
+++ b/drivers/staging/tidspbridge/include/dspbridge/host_os.h
@@ -40,15 +40,14 @@
#include <linux/vmalloc.h>
#include <linux/ioport.h>
#include <linux/platform_device.h>
-#include <plat/clock.h>
#include <linux/clk.h>
#include <plat/mailbox.h>
#include <linux/pagemap.h>
#include <asm/cacheflush.h>
#include <linux/dma-mapping.h>
-/* TODO -- Remove, once BP defines them */
-#define INT_DSP_MMU_IRQ 28
+/* TODO -- Remove, once omap-iommu is used */
+#define INT_DSP_MMU_IRQ (28 + NR_IRQS)
#define PRCM_VDD1 1
diff --git a/drivers/staging/tidspbridge/rmgr/drv.c b/drivers/staging/tidspbridge/rmgr/drv.c
index 6795205..db1da28 100644
--- a/drivers/staging/tidspbridge/rmgr/drv.c
+++ b/drivers/staging/tidspbridge/rmgr/drv.c
@@ -667,10 +667,10 @@
OMAP_DSP_MEM3_SIZE);
host_res->per_base = ioremap(OMAP_PER_CM_BASE,
OMAP_PER_CM_SIZE);
- host_res->per_pm_base = (u32) ioremap(OMAP_PER_PRM_BASE,
- OMAP_PER_PRM_SIZE);
- host_res->core_pm_base = (u32) ioremap(OMAP_CORE_PRM_BASE,
- OMAP_CORE_PRM_SIZE);
+ host_res->per_pm_base = ioremap(OMAP_PER_PRM_BASE,
+ OMAP_PER_PRM_SIZE);
+ host_res->core_pm_base = ioremap(OMAP_CORE_PRM_BASE,
+ OMAP_CORE_PRM_SIZE);
host_res->dmmu_base = ioremap(OMAP_DMMU_BASE,
OMAP_DMMU_SIZE);
diff --git a/drivers/staging/tidspbridge/rmgr/node.c b/drivers/staging/tidspbridge/rmgr/node.c
index c2fc613..294e9b4 100644
--- a/drivers/staging/tidspbridge/rmgr/node.c
+++ b/drivers/staging/tidspbridge/rmgr/node.c
@@ -304,8 +304,7 @@
u32 pul_value;
u32 dynext_base;
u32 off_set = 0;
- u32 ul_stack_seg_addr, ul_stack_seg_val;
- u32 ul_gpp_mem_base;
+ u32 ul_stack_seg_val;
struct cfg_hostres *host_res;
struct bridge_dev_context *pbridge_context;
u32 mapped_addr = 0;
@@ -581,6 +580,9 @@
if (strcmp((char *)
pnode->dcd_props.obj_data.node_obj.ndb_props.
stack_seg_name, STACKSEGLABEL) == 0) {
+ void __iomem *stack_seg;
+ u32 stack_seg_pa;
+
status =
hnode_mgr->nldr_fxns.
get_fxn_addr(pnode->nldr_node_obj, "DYNEXT_BEG",
@@ -608,14 +610,21 @@
goto func_end;
}
- ul_gpp_mem_base = (u32) host_res->mem_base[1];
off_set = pul_value - dynext_base;
- ul_stack_seg_addr = ul_gpp_mem_base + off_set;
- ul_stack_seg_val = readl(ul_stack_seg_addr);
+ stack_seg_pa = host_res->mem_phys[1] + off_set;
+ stack_seg = ioremap(stack_seg_pa, SZ_32);
+ if (!stack_seg) {
+ status = -ENOMEM;
+ goto func_end;
+ }
+
+ ul_stack_seg_val = readl(stack_seg);
+
+ iounmap(stack_seg);
dev_dbg(bridge, "%s: StackSegVal = 0x%x, StackSegAddr ="
" 0x%x\n", __func__, ul_stack_seg_val,
- ul_stack_seg_addr);
+ host_res->mem_base[1] + off_set);
pnode->create_args.asa.task_arg_obj.stack_seg =
ul_stack_seg_val;
diff --git a/drivers/staging/zram/zram_drv.c b/drivers/staging/zram/zram_drv.c
index 653b074..6edefde 100644
--- a/drivers/staging/zram/zram_drv.c
+++ b/drivers/staging/zram/zram_drv.c
@@ -223,8 +223,13 @@
cmem = zs_map_object(zram->mem_pool, zram->table[index].handle,
ZS_MM_RO);
- ret = lzo1x_decompress_safe(cmem, zram->table[index].size,
+ if (zram->table[index].size == PAGE_SIZE) {
+ memcpy(uncmem, cmem, PAGE_SIZE);
+ ret = LZO_E_OK;
+ } else {
+ ret = lzo1x_decompress_safe(cmem, zram->table[index].size,
uncmem, &clen);
+ }
if (is_partial_io(bvec)) {
memcpy(user_mem + bvec->bv_offset, uncmem + offset,
@@ -342,8 +347,11 @@
goto out;
}
- if (unlikely(clen > max_zpage_size))
+ if (unlikely(clen > max_zpage_size)) {
zram_stat_inc(&zram->stats.bad_compress);
+ src = uncmem;
+ clen = PAGE_SIZE;
+ }
handle = zs_malloc(zram->mem_pool, clen);
if (!handle) {
diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c
index d6ce218..035c2c7 100644
--- a/drivers/target/iscsi/iscsi_target.c
+++ b/drivers/target/iscsi/iscsi_target.c
@@ -3719,7 +3719,9 @@
*/
iscsit_thread_check_cpumask(conn, current, 1);
- schedule_timeout_interruptible(MAX_SCHEDULE_TIMEOUT);
+ wait_event_interruptible(conn->queues_wq,
+ !iscsit_conn_all_queues_empty(conn) ||
+ ts->status == ISCSI_THREAD_SET_RESET);
if ((ts->status == ISCSI_THREAD_SET_RESET) ||
signal_pending(current))
diff --git a/drivers/target/iscsi/iscsi_target_core.h b/drivers/target/iscsi/iscsi_target_core.h
index 2ba9f9b..21048db 100644
--- a/drivers/target/iscsi/iscsi_target_core.h
+++ b/drivers/target/iscsi/iscsi_target_core.h
@@ -486,6 +486,7 @@
};
struct iscsi_conn {
+ wait_queue_head_t queues_wq;
/* Authentication Successful for this connection */
u8 auth_complete;
/* State connection is currently in */
diff --git a/drivers/target/iscsi/iscsi_target_login.c b/drivers/target/iscsi/iscsi_target_login.c
index cdc8a10..f8dbec0 100644
--- a/drivers/target/iscsi/iscsi_target_login.c
+++ b/drivers/target/iscsi/iscsi_target_login.c
@@ -41,6 +41,7 @@
static int iscsi_login_init_conn(struct iscsi_conn *conn)
{
+ init_waitqueue_head(&conn->queues_wq);
INIT_LIST_HEAD(&conn->conn_list);
INIT_LIST_HEAD(&conn->conn_cmd_list);
INIT_LIST_HEAD(&conn->immed_queue_list);
diff --git a/drivers/target/iscsi/iscsi_target_util.c b/drivers/target/iscsi/iscsi_target_util.c
index afd98cc..1a91195 100644
--- a/drivers/target/iscsi/iscsi_target_util.c
+++ b/drivers/target/iscsi/iscsi_target_util.c
@@ -488,7 +488,7 @@
atomic_set(&conn->check_immediate_queue, 1);
spin_unlock_bh(&conn->immed_queue_lock);
- wake_up_process(conn->thread_set->tx_thread);
+ wake_up(&conn->queues_wq);
}
struct iscsi_queue_req *iscsit_get_cmd_from_immediate_queue(struct iscsi_conn *conn)
@@ -562,7 +562,7 @@
atomic_inc(&cmd->response_queue_count);
spin_unlock_bh(&conn->response_queue_lock);
- wake_up_process(conn->thread_set->tx_thread);
+ wake_up(&conn->queues_wq);
}
struct iscsi_queue_req *iscsit_get_cmd_from_response_queue(struct iscsi_conn *conn)
@@ -616,6 +616,24 @@
}
}
+bool iscsit_conn_all_queues_empty(struct iscsi_conn *conn)
+{
+ bool empty;
+
+ spin_lock_bh(&conn->immed_queue_lock);
+ empty = list_empty(&conn->immed_queue_list);
+ spin_unlock_bh(&conn->immed_queue_lock);
+
+ if (!empty)
+ return empty;
+
+ spin_lock_bh(&conn->response_queue_lock);
+ empty = list_empty(&conn->response_queue_list);
+ spin_unlock_bh(&conn->response_queue_lock);
+
+ return empty;
+}
+
void iscsit_free_queue_reqs_for_conn(struct iscsi_conn *conn)
{
struct iscsi_queue_req *qr, *qr_tmp;
diff --git a/drivers/target/iscsi/iscsi_target_util.h b/drivers/target/iscsi/iscsi_target_util.h
index 44054bd3..894d0f8 100644
--- a/drivers/target/iscsi/iscsi_target_util.h
+++ b/drivers/target/iscsi/iscsi_target_util.h
@@ -25,6 +25,7 @@
extern void iscsit_add_cmd_to_response_queue(struct iscsi_cmd *, struct iscsi_conn *, u8);
extern struct iscsi_queue_req *iscsit_get_cmd_from_response_queue(struct iscsi_conn *);
extern void iscsit_remove_cmd_from_tx_queues(struct iscsi_cmd *, struct iscsi_conn *);
+extern bool iscsit_conn_all_queues_empty(struct iscsi_conn *);
extern void iscsit_free_queue_reqs_for_conn(struct iscsi_conn *);
extern void iscsit_release_cmd(struct iscsi_cmd *);
extern void iscsit_free_cmd(struct iscsi_cmd *);
diff --git a/drivers/target/target_core_configfs.c b/drivers/target/target_core_configfs.c
index 015f5be..c123327 100644
--- a/drivers/target/target_core_configfs.c
+++ b/drivers/target/target_core_configfs.c
@@ -3206,7 +3206,8 @@
if (ret < 0)
goto out;
- if (core_dev_setup_virtual_lun0() < 0)
+ ret = core_dev_setup_virtual_lun0();
+ if (ret < 0)
goto out;
return 0;
diff --git a/drivers/target/target_core_device.c b/drivers/target/target_core_device.c
index 8d774da..9abef9f8 100644
--- a/drivers/target/target_core_device.c
+++ b/drivers/target/target_core_device.c
@@ -850,20 +850,20 @@
static u32 se_dev_align_max_sectors(u32 max_sectors, u32 block_size)
{
- u32 tmp, aligned_max_sectors;
+ u32 aligned_max_sectors;
+ u32 alignment;
/*
* Limit max_sectors to a PAGE_SIZE aligned value for modern
* transport_allocate_data_tasks() operation.
*/
- tmp = rounddown((max_sectors * block_size), PAGE_SIZE);
- aligned_max_sectors = (tmp / block_size);
- if (max_sectors != aligned_max_sectors) {
- printk(KERN_INFO "Rounding down aligned max_sectors from %u"
- " to %u\n", max_sectors, aligned_max_sectors);
- return aligned_max_sectors;
- }
+ alignment = max(1ul, PAGE_SIZE / block_size);
+ aligned_max_sectors = rounddown(max_sectors, alignment);
- return max_sectors;
+ if (max_sectors != aligned_max_sectors)
+ pr_info("Rounding down aligned max_sectors from %u to %u\n",
+ max_sectors, aligned_max_sectors);
+
+ return aligned_max_sectors;
}
void se_dev_set_default_attribs(
diff --git a/drivers/target/target_core_sbc.c b/drivers/target/target_core_sbc.c
index 868f8aa..a6e27d9 100644
--- a/drivers/target/target_core_sbc.c
+++ b/drivers/target/target_core_sbc.c
@@ -135,6 +135,12 @@
return 0;
}
+static int sbc_emulate_noop(struct se_cmd *cmd)
+{
+ target_complete_cmd(cmd, GOOD);
+ return 0;
+}
+
static inline u32 sbc_get_size(struct se_cmd *cmd, u32 sectors)
{
return cmd->se_dev->se_sub_dev->se_dev_attrib.block_size * sectors;
@@ -531,6 +537,18 @@
size = 0;
cmd->execute_cmd = sbc_emulate_verify;
break;
+ case REZERO_UNIT:
+ case SEEK_6:
+ case SEEK_10:
+ /*
+ * There are still clients out there which use these old SCSI-2
+ * commands. This mainly happens when running VMs with legacy
+ * guest systems, connected via SCSI command pass-through to
+ * iSCSI targets. Make them happy and return status GOOD.
+ */
+ size = 0;
+ cmd->execute_cmd = sbc_emulate_noop;
+ break;
default:
ret = spc_parse_cdb(cmd, &size);
if (ret)
diff --git a/drivers/target/target_core_spc.c b/drivers/target/target_core_spc.c
index 9229bd9..6fd434d 100644
--- a/drivers/target/target_core_spc.c
+++ b/drivers/target/target_core_spc.c
@@ -605,6 +605,8 @@
unsigned char buf[SE_INQUIRY_BUF];
int p, ret;
+ memset(buf, 0, SE_INQUIRY_BUF);
+
if (dev == tpg->tpg_virt_lun0.lun_se_dev)
buf[0] = 0x3f; /* Not connected */
else
diff --git a/drivers/target/target_core_tmr.c b/drivers/target/target_core_tmr.c
index 1c59a3c..be75c43 100644
--- a/drivers/target/target_core_tmr.c
+++ b/drivers/target/target_core_tmr.c
@@ -140,15 +140,15 @@
printk("ABORT_TASK: Found referenced %s task_tag: %u\n",
se_cmd->se_tfo->get_fabric_name(), ref_tag);
- spin_lock_irq(&se_cmd->t_state_lock);
+ spin_lock(&se_cmd->t_state_lock);
if (se_cmd->transport_state & CMD_T_COMPLETE) {
printk("ABORT_TASK: ref_tag: %u already complete, skipping\n", ref_tag);
- spin_unlock_irq(&se_cmd->t_state_lock);
+ spin_unlock(&se_cmd->t_state_lock);
spin_unlock_irqrestore(&se_sess->sess_cmd_lock, flags);
goto out;
}
se_cmd->transport_state |= CMD_T_ABORTED;
- spin_unlock_irq(&se_cmd->t_state_lock);
+ spin_unlock(&se_cmd->t_state_lock);
list_del_init(&se_cmd->se_cmd_list);
kref_get(&se_cmd->cmd_kref);
diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c
index c33baff..9097155 100644
--- a/drivers/target/target_core_transport.c
+++ b/drivers/target/target_core_transport.c
@@ -1616,7 +1616,6 @@
se_cmd->se_tmr_req->response = TMR_LUN_DOES_NOT_EXIST;
se_cmd->se_tfo->queue_tm_rsp(se_cmd);
- transport_generic_free_cmd(se_cmd, 0);
}
/**
diff --git a/drivers/thermal/exynos_thermal.c b/drivers/thermal/exynos_thermal.c
index fd03e85..6dd29e4 100644
--- a/drivers/thermal/exynos_thermal.c
+++ b/drivers/thermal/exynos_thermal.c
@@ -815,7 +815,7 @@
},
{ },
};
-MODULE_DEVICE_TABLE(platform, exynos4_tmu_driver_ids);
+MODULE_DEVICE_TABLE(platform, exynos_tmu_driver_ids);
static inline struct exynos_tmu_platform_data *exynos_get_driver_data(
struct platform_device *pdev)
diff --git a/drivers/thermal/rcar_thermal.c b/drivers/thermal/rcar_thermal.c
index d445271..f7a1b57 100644
--- a/drivers/thermal/rcar_thermal.c
+++ b/drivers/thermal/rcar_thermal.c
@@ -210,7 +210,7 @@
goto error_free_priv;
}
- zone = thermal_zone_device_register("rcar_thermal", 0, priv,
+ zone = thermal_zone_device_register("rcar_thermal", 0, 0, priv,
&rcar_thermal_zone_ops, 0, 0);
if (IS_ERR(zone)) {
dev_err(&pdev->dev, "thermal zone device is NULL\n");
diff --git a/drivers/tty/hvc/hvc_console.c b/drivers/tty/hvc/hvc_console.c
index a5dec1c..13ee53b 100644
--- a/drivers/tty/hvc/hvc_console.c
+++ b/drivers/tty/hvc/hvc_console.c
@@ -424,7 +424,6 @@
{
struct hvc_struct *hp = tty->driver_data;
unsigned long flags;
- int temp_open_count;
if (!hp)
return;
@@ -444,7 +443,6 @@
return;
}
- temp_open_count = hp->port.count;
hp->port.count = 0;
spin_unlock_irqrestore(&hp->port.lock, flags);
tty_port_tty_set(&hp->port, NULL);
@@ -453,11 +451,6 @@
if (hp->ops->notifier_hangup)
hp->ops->notifier_hangup(hp, hp->data);
-
- while(temp_open_count) {
- --temp_open_count;
- tty_port_put(&hp->port);
- }
}
/*
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 8c0b7b4..60b076c 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -73,10 +73,42 @@
#define ECHO_OP_SET_CANON_COL 0x81
#define ECHO_OP_ERASE_TAB 0x82
+struct n_tty_data {
+ unsigned int column;
+ unsigned long overrun_time;
+ int num_overrun;
+
+ unsigned char lnext:1, erasing:1, raw:1, real_raw:1, icanon:1;
+ unsigned char echo_overrun:1;
+
+ DECLARE_BITMAP(process_char_map, 256);
+ DECLARE_BITMAP(read_flags, N_TTY_BUF_SIZE);
+
+ char *read_buf;
+ int read_head;
+ int read_tail;
+ int read_cnt;
+
+ unsigned char *echo_buf;
+ unsigned int echo_pos;
+ unsigned int echo_cnt;
+
+ int canon_data;
+ unsigned long canon_head;
+ unsigned int canon_column;
+
+ struct mutex atomic_read_lock;
+ struct mutex output_lock;
+ struct mutex echo_lock;
+ spinlock_t read_lock;
+};
+
static inline int tty_put_user(struct tty_struct *tty, unsigned char x,
unsigned char __user *ptr)
{
- tty_audit_add_data(tty, &x, 1);
+ struct n_tty_data *ldata = tty->disc_data;
+
+ tty_audit_add_data(tty, &x, 1, ldata->icanon);
return put_user(x, ptr);
}
@@ -92,17 +124,18 @@
static void n_tty_set_room(struct tty_struct *tty)
{
+ struct n_tty_data *ldata = tty->disc_data;
int left;
int old_left;
- /* tty->read_cnt is not read locked ? */
+ /* ldata->read_cnt is not read locked ? */
if (I_PARMRK(tty)) {
/* Multiply read_cnt by 3, since each byte might take up to
* three times as many spaces when PARMRK is set (depending on
* its flags, e.g. parity error). */
- left = N_TTY_BUF_SIZE - tty->read_cnt * 3 - 1;
+ left = N_TTY_BUF_SIZE - ldata->read_cnt * 3 - 1;
} else
- left = N_TTY_BUF_SIZE - tty->read_cnt - 1;
+ left = N_TTY_BUF_SIZE - ldata->read_cnt - 1;
/*
* If we are doing input canonicalization, and there are no
@@ -111,44 +144,47 @@
* characters will be beeped.
*/
if (left <= 0)
- left = tty->icanon && !tty->canon_data;
+ left = ldata->icanon && !ldata->canon_data;
old_left = tty->receive_room;
tty->receive_room = left;
/* Did this open up the receive buffer? We may need to flip */
- if (left && !old_left)
- schedule_work(&tty->buf.work);
+ if (left && !old_left) {
+ WARN_RATELIMIT(tty->port->itty == NULL,
+ "scheduling with invalid itty");
+ schedule_work(&tty->port->buf.work);
+ }
}
-static void put_tty_queue_nolock(unsigned char c, struct tty_struct *tty)
+static void put_tty_queue_nolock(unsigned char c, struct n_tty_data *ldata)
{
- if (tty->read_cnt < N_TTY_BUF_SIZE) {
- tty->read_buf[tty->read_head] = c;
- tty->read_head = (tty->read_head + 1) & (N_TTY_BUF_SIZE-1);
- tty->read_cnt++;
+ if (ldata->read_cnt < N_TTY_BUF_SIZE) {
+ ldata->read_buf[ldata->read_head] = c;
+ ldata->read_head = (ldata->read_head + 1) & (N_TTY_BUF_SIZE-1);
+ ldata->read_cnt++;
}
}
/**
* put_tty_queue - add character to tty
* @c: character
- * @tty: tty device
+ * @ldata: n_tty data
*
* Add a character to the tty read_buf queue. This is done under the
* read_lock to serialize character addition and also to protect us
* against parallel reads or flushes
*/
-static void put_tty_queue(unsigned char c, struct tty_struct *tty)
+static void put_tty_queue(unsigned char c, struct n_tty_data *ldata)
{
unsigned long flags;
/*
* The problem of stomping on the buffers ends here.
* Why didn't anyone see this one coming? --AJK
*/
- spin_lock_irqsave(&tty->read_lock, flags);
- put_tty_queue_nolock(c, tty);
- spin_unlock_irqrestore(&tty->read_lock, flags);
+ spin_lock_irqsave(&ldata->read_lock, flags);
+ put_tty_queue_nolock(c, ldata);
+ spin_unlock_irqrestore(&ldata->read_lock, flags);
}
/**
@@ -179,18 +215,19 @@
static void reset_buffer_flags(struct tty_struct *tty)
{
+ struct n_tty_data *ldata = tty->disc_data;
unsigned long flags;
- spin_lock_irqsave(&tty->read_lock, flags);
- tty->read_head = tty->read_tail = tty->read_cnt = 0;
- spin_unlock_irqrestore(&tty->read_lock, flags);
+ spin_lock_irqsave(&ldata->read_lock, flags);
+ ldata->read_head = ldata->read_tail = ldata->read_cnt = 0;
+ spin_unlock_irqrestore(&ldata->read_lock, flags);
- mutex_lock(&tty->echo_lock);
- tty->echo_pos = tty->echo_cnt = tty->echo_overrun = 0;
- mutex_unlock(&tty->echo_lock);
+ mutex_lock(&ldata->echo_lock);
+ ldata->echo_pos = ldata->echo_cnt = ldata->echo_overrun = 0;
+ mutex_unlock(&ldata->echo_lock);
- tty->canon_head = tty->canon_data = tty->erasing = 0;
- memset(&tty->read_flags, 0, sizeof tty->read_flags);
+ ldata->canon_head = ldata->canon_data = ldata->erasing = 0;
+ bitmap_zero(ldata->read_flags, N_TTY_BUF_SIZE);
n_tty_set_room(tty);
}
@@ -235,18 +272,19 @@
static ssize_t n_tty_chars_in_buffer(struct tty_struct *tty)
{
+ struct n_tty_data *ldata = tty->disc_data;
unsigned long flags;
ssize_t n = 0;
- spin_lock_irqsave(&tty->read_lock, flags);
- if (!tty->icanon) {
- n = tty->read_cnt;
- } else if (tty->canon_data) {
- n = (tty->canon_head > tty->read_tail) ?
- tty->canon_head - tty->read_tail :
- tty->canon_head + (N_TTY_BUF_SIZE - tty->read_tail);
+ spin_lock_irqsave(&ldata->read_lock, flags);
+ if (!ldata->icanon) {
+ n = ldata->read_cnt;
+ } else if (ldata->canon_data) {
+ n = (ldata->canon_head > ldata->read_tail) ?
+ ldata->canon_head - ldata->read_tail :
+ ldata->canon_head + (N_TTY_BUF_SIZE - ldata->read_tail);
}
- spin_unlock_irqrestore(&tty->read_lock, flags);
+ spin_unlock_irqrestore(&ldata->read_lock, flags);
return n;
}
@@ -301,6 +339,7 @@
static int do_output_char(unsigned char c, struct tty_struct *tty, int space)
{
+ struct n_tty_data *ldata = tty->disc_data;
int spaces;
if (!space)
@@ -309,48 +348,48 @@
switch (c) {
case '\n':
if (O_ONLRET(tty))
- tty->column = 0;
+ ldata->column = 0;
if (O_ONLCR(tty)) {
if (space < 2)
return -1;
- tty->canon_column = tty->column = 0;
+ ldata->canon_column = ldata->column = 0;
tty->ops->write(tty, "\r\n", 2);
return 2;
}
- tty->canon_column = tty->column;
+ ldata->canon_column = ldata->column;
break;
case '\r':
- if (O_ONOCR(tty) && tty->column == 0)
+ if (O_ONOCR(tty) && ldata->column == 0)
return 0;
if (O_OCRNL(tty)) {
c = '\n';
if (O_ONLRET(tty))
- tty->canon_column = tty->column = 0;
+ ldata->canon_column = ldata->column = 0;
break;
}
- tty->canon_column = tty->column = 0;
+ ldata->canon_column = ldata->column = 0;
break;
case '\t':
- spaces = 8 - (tty->column & 7);
+ spaces = 8 - (ldata->column & 7);
if (O_TABDLY(tty) == XTABS) {
if (space < spaces)
return -1;
- tty->column += spaces;
+ ldata->column += spaces;
tty->ops->write(tty, " ", spaces);
return spaces;
}
- tty->column += spaces;
+ ldata->column += spaces;
break;
case '\b':
- if (tty->column > 0)
- tty->column--;
+ if (ldata->column > 0)
+ ldata->column--;
break;
default:
if (!iscntrl(c)) {
if (O_OLCUC(tty))
c = toupper(c);
if (!is_continuation(c, tty))
- tty->column++;
+ ldata->column++;
}
break;
}
@@ -375,14 +414,15 @@
static int process_output(unsigned char c, struct tty_struct *tty)
{
+ struct n_tty_data *ldata = tty->disc_data;
int space, retval;
- mutex_lock(&tty->output_lock);
+ mutex_lock(&ldata->output_lock);
space = tty_write_room(tty);
retval = do_output_char(c, tty, space);
- mutex_unlock(&tty->output_lock);
+ mutex_unlock(&ldata->output_lock);
if (retval < 0)
return -1;
else
@@ -411,15 +451,16 @@
static ssize_t process_output_block(struct tty_struct *tty,
const unsigned char *buf, unsigned int nr)
{
+ struct n_tty_data *ldata = tty->disc_data;
int space;
int i;
const unsigned char *cp;
- mutex_lock(&tty->output_lock);
+ mutex_lock(&ldata->output_lock);
space = tty_write_room(tty);
if (!space) {
- mutex_unlock(&tty->output_lock);
+ mutex_unlock(&ldata->output_lock);
return 0;
}
if (nr > space)
@@ -431,30 +472,30 @@
switch (c) {
case '\n':
if (O_ONLRET(tty))
- tty->column = 0;
+ ldata->column = 0;
if (O_ONLCR(tty))
goto break_out;
- tty->canon_column = tty->column;
+ ldata->canon_column = ldata->column;
break;
case '\r':
- if (O_ONOCR(tty) && tty->column == 0)
+ if (O_ONOCR(tty) && ldata->column == 0)
goto break_out;
if (O_OCRNL(tty))
goto break_out;
- tty->canon_column = tty->column = 0;
+ ldata->canon_column = ldata->column = 0;
break;
case '\t':
goto break_out;
case '\b':
- if (tty->column > 0)
- tty->column--;
+ if (ldata->column > 0)
+ ldata->column--;
break;
default:
if (!iscntrl(c)) {
if (O_OLCUC(tty))
goto break_out;
if (!is_continuation(c, tty))
- tty->column++;
+ ldata->column++;
}
break;
}
@@ -462,7 +503,7 @@
break_out:
i = tty->ops->write(tty, buf, i);
- mutex_unlock(&tty->output_lock);
+ mutex_unlock(&ldata->output_lock);
return i;
}
@@ -494,21 +535,22 @@
static void process_echoes(struct tty_struct *tty)
{
+ struct n_tty_data *ldata = tty->disc_data;
int space, nr;
unsigned char c;
unsigned char *cp, *buf_end;
- if (!tty->echo_cnt)
+ if (!ldata->echo_cnt)
return;
- mutex_lock(&tty->output_lock);
- mutex_lock(&tty->echo_lock);
+ mutex_lock(&ldata->output_lock);
+ mutex_lock(&ldata->echo_lock);
space = tty_write_room(tty);
- buf_end = tty->echo_buf + N_TTY_BUF_SIZE;
- cp = tty->echo_buf + tty->echo_pos;
- nr = tty->echo_cnt;
+ buf_end = ldata->echo_buf + N_TTY_BUF_SIZE;
+ cp = ldata->echo_buf + ldata->echo_pos;
+ nr = ldata->echo_cnt;
while (nr > 0) {
c = *cp;
if (c == ECHO_OP_START) {
@@ -545,7 +587,7 @@
* Otherwise, tab spacing is normal.
*/
if (!(num_chars & 0x80))
- num_chars += tty->canon_column;
+ num_chars += ldata->canon_column;
num_bs = 8 - (num_chars & 7);
if (num_bs > space) {
@@ -555,22 +597,22 @@
space -= num_bs;
while (num_bs--) {
tty_put_char(tty, '\b');
- if (tty->column > 0)
- tty->column--;
+ if (ldata->column > 0)
+ ldata->column--;
}
cp += 3;
nr -= 3;
break;
case ECHO_OP_SET_CANON_COL:
- tty->canon_column = tty->column;
+ ldata->canon_column = ldata->column;
cp += 2;
nr -= 2;
break;
case ECHO_OP_MOVE_BACK_COL:
- if (tty->column > 0)
- tty->column--;
+ if (ldata->column > 0)
+ ldata->column--;
cp += 2;
nr -= 2;
break;
@@ -582,7 +624,7 @@
break;
}
tty_put_char(tty, ECHO_OP_START);
- tty->column++;
+ ldata->column++;
space--;
cp += 2;
nr -= 2;
@@ -604,7 +646,7 @@
}
tty_put_char(tty, '^');
tty_put_char(tty, op ^ 0100);
- tty->column += 2;
+ ldata->column += 2;
space -= 2;
cp += 2;
nr -= 2;
@@ -635,20 +677,20 @@
}
if (nr == 0) {
- tty->echo_pos = 0;
- tty->echo_cnt = 0;
- tty->echo_overrun = 0;
+ ldata->echo_pos = 0;
+ ldata->echo_cnt = 0;
+ ldata->echo_overrun = 0;
} else {
- int num_processed = tty->echo_cnt - nr;
- tty->echo_pos += num_processed;
- tty->echo_pos &= N_TTY_BUF_SIZE - 1;
- tty->echo_cnt = nr;
+ int num_processed = ldata->echo_cnt - nr;
+ ldata->echo_pos += num_processed;
+ ldata->echo_pos &= N_TTY_BUF_SIZE - 1;
+ ldata->echo_cnt = nr;
if (num_processed > 0)
- tty->echo_overrun = 0;
+ ldata->echo_overrun = 0;
}
- mutex_unlock(&tty->echo_lock);
- mutex_unlock(&tty->output_lock);
+ mutex_unlock(&ldata->echo_lock);
+ mutex_unlock(&ldata->output_lock);
if (tty->ops->flush_chars)
tty->ops->flush_chars(tty);
@@ -657,72 +699,70 @@
/**
* add_echo_byte - add a byte to the echo buffer
* @c: unicode byte to echo
- * @tty: terminal device
+ * @ldata: n_tty data
*
* Add a character or operation byte to the echo buffer.
*
* Should be called under the echo lock to protect the echo buffer.
*/
-static void add_echo_byte(unsigned char c, struct tty_struct *tty)
+static void add_echo_byte(unsigned char c, struct n_tty_data *ldata)
{
int new_byte_pos;
- if (tty->echo_cnt == N_TTY_BUF_SIZE) {
+ if (ldata->echo_cnt == N_TTY_BUF_SIZE) {
/* Circular buffer is already at capacity */
- new_byte_pos = tty->echo_pos;
+ new_byte_pos = ldata->echo_pos;
/*
* Since the buffer start position needs to be advanced,
* be sure to step by a whole operation byte group.
*/
- if (tty->echo_buf[tty->echo_pos] == ECHO_OP_START) {
- if (tty->echo_buf[(tty->echo_pos + 1) &
+ if (ldata->echo_buf[ldata->echo_pos] == ECHO_OP_START) {
+ if (ldata->echo_buf[(ldata->echo_pos + 1) &
(N_TTY_BUF_SIZE - 1)] ==
ECHO_OP_ERASE_TAB) {
- tty->echo_pos += 3;
- tty->echo_cnt -= 2;
+ ldata->echo_pos += 3;
+ ldata->echo_cnt -= 2;
} else {
- tty->echo_pos += 2;
- tty->echo_cnt -= 1;
+ ldata->echo_pos += 2;
+ ldata->echo_cnt -= 1;
}
} else {
- tty->echo_pos++;
+ ldata->echo_pos++;
}
- tty->echo_pos &= N_TTY_BUF_SIZE - 1;
+ ldata->echo_pos &= N_TTY_BUF_SIZE - 1;
- tty->echo_overrun = 1;
+ ldata->echo_overrun = 1;
} else {
- new_byte_pos = tty->echo_pos + tty->echo_cnt;
+ new_byte_pos = ldata->echo_pos + ldata->echo_cnt;
new_byte_pos &= N_TTY_BUF_SIZE - 1;
- tty->echo_cnt++;
+ ldata->echo_cnt++;
}
- tty->echo_buf[new_byte_pos] = c;
+ ldata->echo_buf[new_byte_pos] = c;
}
/**
* echo_move_back_col - add operation to move back a column
- * @tty: terminal device
+ * @ldata: n_tty data
*
* Add an operation to the echo buffer to move back one column.
*
* Locking: echo_lock to protect the echo buffer
*/
-static void echo_move_back_col(struct tty_struct *tty)
+static void echo_move_back_col(struct n_tty_data *ldata)
{
- mutex_lock(&tty->echo_lock);
-
- add_echo_byte(ECHO_OP_START, tty);
- add_echo_byte(ECHO_OP_MOVE_BACK_COL, tty);
-
- mutex_unlock(&tty->echo_lock);
+ mutex_lock(&ldata->echo_lock);
+ add_echo_byte(ECHO_OP_START, ldata);
+ add_echo_byte(ECHO_OP_MOVE_BACK_COL, ldata);
+ mutex_unlock(&ldata->echo_lock);
}
/**
* echo_set_canon_col - add operation to set the canon column
- * @tty: terminal device
+ * @ldata: n_tty data
*
* Add an operation to the echo buffer to set the canon column
* to the current column.
@@ -730,21 +770,19 @@
* Locking: echo_lock to protect the echo buffer
*/
-static void echo_set_canon_col(struct tty_struct *tty)
+static void echo_set_canon_col(struct n_tty_data *ldata)
{
- mutex_lock(&tty->echo_lock);
-
- add_echo_byte(ECHO_OP_START, tty);
- add_echo_byte(ECHO_OP_SET_CANON_COL, tty);
-
- mutex_unlock(&tty->echo_lock);
+ mutex_lock(&ldata->echo_lock);
+ add_echo_byte(ECHO_OP_START, ldata);
+ add_echo_byte(ECHO_OP_SET_CANON_COL, ldata);
+ mutex_unlock(&ldata->echo_lock);
}
/**
* echo_erase_tab - add operation to erase a tab
* @num_chars: number of character columns already used
* @after_tab: true if num_chars starts after a previous tab
- * @tty: terminal device
+ * @ldata: n_tty data
*
* Add an operation to the echo buffer to erase a tab.
*
@@ -758,12 +796,12 @@
*/
static void echo_erase_tab(unsigned int num_chars, int after_tab,
- struct tty_struct *tty)
+ struct n_tty_data *ldata)
{
- mutex_lock(&tty->echo_lock);
+ mutex_lock(&ldata->echo_lock);
- add_echo_byte(ECHO_OP_START, tty);
- add_echo_byte(ECHO_OP_ERASE_TAB, tty);
+ add_echo_byte(ECHO_OP_START, ldata);
+ add_echo_byte(ECHO_OP_ERASE_TAB, ldata);
/* We only need to know this modulo 8 (tab spacing) */
num_chars &= 7;
@@ -772,9 +810,9 @@
if (after_tab)
num_chars |= 0x80;
- add_echo_byte(num_chars, tty);
+ add_echo_byte(num_chars, ldata);
- mutex_unlock(&tty->echo_lock);
+ mutex_unlock(&ldata->echo_lock);
}
/**
@@ -790,18 +828,16 @@
* Locking: echo_lock to protect the echo buffer
*/
-static void echo_char_raw(unsigned char c, struct tty_struct *tty)
+static void echo_char_raw(unsigned char c, struct n_tty_data *ldata)
{
- mutex_lock(&tty->echo_lock);
-
+ mutex_lock(&ldata->echo_lock);
if (c == ECHO_OP_START) {
- add_echo_byte(ECHO_OP_START, tty);
- add_echo_byte(ECHO_OP_START, tty);
+ add_echo_byte(ECHO_OP_START, ldata);
+ add_echo_byte(ECHO_OP_START, ldata);
} else {
- add_echo_byte(c, tty);
+ add_echo_byte(c, ldata);
}
-
- mutex_unlock(&tty->echo_lock);
+ mutex_unlock(&ldata->echo_lock);
}
/**
@@ -820,30 +856,32 @@
static void echo_char(unsigned char c, struct tty_struct *tty)
{
- mutex_lock(&tty->echo_lock);
+ struct n_tty_data *ldata = tty->disc_data;
+
+ mutex_lock(&ldata->echo_lock);
if (c == ECHO_OP_START) {
- add_echo_byte(ECHO_OP_START, tty);
- add_echo_byte(ECHO_OP_START, tty);
+ add_echo_byte(ECHO_OP_START, ldata);
+ add_echo_byte(ECHO_OP_START, ldata);
} else {
if (L_ECHOCTL(tty) && iscntrl(c) && c != '\t')
- add_echo_byte(ECHO_OP_START, tty);
- add_echo_byte(c, tty);
+ add_echo_byte(ECHO_OP_START, ldata);
+ add_echo_byte(c, ldata);
}
- mutex_unlock(&tty->echo_lock);
+ mutex_unlock(&ldata->echo_lock);
}
/**
* finish_erasing - complete erase
- * @tty: tty doing the erase
+ * @ldata: n_tty data
*/
-static inline void finish_erasing(struct tty_struct *tty)
+static inline void finish_erasing(struct n_tty_data *ldata)
{
- if (tty->erasing) {
- echo_char_raw('/', tty);
- tty->erasing = 0;
+ if (ldata->erasing) {
+ echo_char_raw('/', ldata);
+ ldata->erasing = 0;
}
}
@@ -861,12 +899,13 @@
static void eraser(unsigned char c, struct tty_struct *tty)
{
+ struct n_tty_data *ldata = tty->disc_data;
enum { ERASE, WERASE, KILL } kill_type;
int head, seen_alnums, cnt;
unsigned long flags;
/* FIXME: locking needed ? */
- if (tty->read_head == tty->canon_head) {
+ if (ldata->read_head == ldata->canon_head) {
/* process_output('\a', tty); */ /* what do you think? */
return;
}
@@ -876,24 +915,24 @@
kill_type = WERASE;
else {
if (!L_ECHO(tty)) {
- spin_lock_irqsave(&tty->read_lock, flags);
- tty->read_cnt -= ((tty->read_head - tty->canon_head) &
+ spin_lock_irqsave(&ldata->read_lock, flags);
+ ldata->read_cnt -= ((ldata->read_head - ldata->canon_head) &
(N_TTY_BUF_SIZE - 1));
- tty->read_head = tty->canon_head;
- spin_unlock_irqrestore(&tty->read_lock, flags);
+ ldata->read_head = ldata->canon_head;
+ spin_unlock_irqrestore(&ldata->read_lock, flags);
return;
}
if (!L_ECHOK(tty) || !L_ECHOKE(tty) || !L_ECHOE(tty)) {
- spin_lock_irqsave(&tty->read_lock, flags);
- tty->read_cnt -= ((tty->read_head - tty->canon_head) &
+ spin_lock_irqsave(&ldata->read_lock, flags);
+ ldata->read_cnt -= ((ldata->read_head - ldata->canon_head) &
(N_TTY_BUF_SIZE - 1));
- tty->read_head = tty->canon_head;
- spin_unlock_irqrestore(&tty->read_lock, flags);
- finish_erasing(tty);
+ ldata->read_head = ldata->canon_head;
+ spin_unlock_irqrestore(&ldata->read_lock, flags);
+ finish_erasing(ldata);
echo_char(KILL_CHAR(tty), tty);
/* Add a newline if ECHOK is on and ECHOKE is off. */
if (L_ECHOK(tty))
- echo_char_raw('\n', tty);
+ echo_char_raw('\n', ldata);
return;
}
kill_type = KILL;
@@ -901,14 +940,14 @@
seen_alnums = 0;
/* FIXME: Locking ?? */
- while (tty->read_head != tty->canon_head) {
- head = tty->read_head;
+ while (ldata->read_head != ldata->canon_head) {
+ head = ldata->read_head;
/* erase a single possibly multibyte character */
do {
head = (head - 1) & (N_TTY_BUF_SIZE-1);
- c = tty->read_buf[head];
- } while (is_continuation(c, tty) && head != tty->canon_head);
+ c = ldata->read_buf[head];
+ } while (is_continuation(c, tty) && head != ldata->canon_head);
/* do not partially erase */
if (is_continuation(c, tty))
@@ -921,30 +960,31 @@
else if (seen_alnums)
break;
}
- cnt = (tty->read_head - head) & (N_TTY_BUF_SIZE-1);
- spin_lock_irqsave(&tty->read_lock, flags);
- tty->read_head = head;
- tty->read_cnt -= cnt;
- spin_unlock_irqrestore(&tty->read_lock, flags);
+ cnt = (ldata->read_head - head) & (N_TTY_BUF_SIZE-1);
+ spin_lock_irqsave(&ldata->read_lock, flags);
+ ldata->read_head = head;
+ ldata->read_cnt -= cnt;
+ spin_unlock_irqrestore(&ldata->read_lock, flags);
if (L_ECHO(tty)) {
if (L_ECHOPRT(tty)) {
- if (!tty->erasing) {
- echo_char_raw('\\', tty);
- tty->erasing = 1;
+ if (!ldata->erasing) {
+ echo_char_raw('\\', ldata);
+ ldata->erasing = 1;
}
/* if cnt > 1, output a multi-byte character */
echo_char(c, tty);
while (--cnt > 0) {
head = (head+1) & (N_TTY_BUF_SIZE-1);
- echo_char_raw(tty->read_buf[head], tty);
- echo_move_back_col(tty);
+ echo_char_raw(ldata->read_buf[head],
+ ldata);
+ echo_move_back_col(ldata);
}
} else if (kill_type == ERASE && !L_ECHOE(tty)) {
echo_char(ERASE_CHAR(tty), tty);
} else if (c == '\t') {
unsigned int num_chars = 0;
int after_tab = 0;
- unsigned long tail = tty->read_head;
+ unsigned long tail = ldata->read_head;
/*
* Count the columns used for characters
@@ -953,9 +993,9 @@
* This info is used to go back the correct
* number of columns.
*/
- while (tail != tty->canon_head) {
+ while (tail != ldata->canon_head) {
tail = (tail-1) & (N_TTY_BUF_SIZE-1);
- c = tty->read_buf[tail];
+ c = ldata->read_buf[tail];
if (c == '\t') {
after_tab = 1;
break;
@@ -966,25 +1006,25 @@
num_chars++;
}
}
- echo_erase_tab(num_chars, after_tab, tty);
+ echo_erase_tab(num_chars, after_tab, ldata);
} else {
if (iscntrl(c) && L_ECHOCTL(tty)) {
- echo_char_raw('\b', tty);
- echo_char_raw(' ', tty);
- echo_char_raw('\b', tty);
+ echo_char_raw('\b', ldata);
+ echo_char_raw(' ', ldata);
+ echo_char_raw('\b', ldata);
}
if (!iscntrl(c) || L_ECHOCTL(tty)) {
- echo_char_raw('\b', tty);
- echo_char_raw(' ', tty);
- echo_char_raw('\b', tty);
+ echo_char_raw('\b', ldata);
+ echo_char_raw(' ', ldata);
+ echo_char_raw('\b', ldata);
}
}
}
if (kill_type == ERASE)
break;
}
- if (tty->read_head == tty->canon_head && L_ECHO(tty))
- finish_erasing(tty);
+ if (ldata->read_head == ldata->canon_head && L_ECHO(tty))
+ finish_erasing(ldata);
}
/**
@@ -1023,6 +1063,8 @@
static inline void n_tty_receive_break(struct tty_struct *tty)
{
+ struct n_tty_data *ldata = tty->disc_data;
+
if (I_IGNBRK(tty))
return;
if (I_BRKINT(tty)) {
@@ -1030,10 +1072,10 @@
return;
}
if (I_PARMRK(tty)) {
- put_tty_queue('\377', tty);
- put_tty_queue('\0', tty);
+ put_tty_queue('\377', ldata);
+ put_tty_queue('\0', ldata);
}
- put_tty_queue('\0', tty);
+ put_tty_queue('\0', ldata);
wake_up_interruptible(&tty->read_wait);
}
@@ -1052,16 +1094,17 @@
static inline void n_tty_receive_overrun(struct tty_struct *tty)
{
+ struct n_tty_data *ldata = tty->disc_data;
char buf[64];
- tty->num_overrun++;
- if (time_before(tty->overrun_time, jiffies - HZ) ||
- time_after(tty->overrun_time, jiffies)) {
+ ldata->num_overrun++;
+ if (time_after(jiffies, ldata->overrun_time + HZ) ||
+ time_after(ldata->overrun_time, jiffies)) {
printk(KERN_WARNING "%s: %d input overrun(s)\n",
tty_name(tty, buf),
- tty->num_overrun);
- tty->overrun_time = jiffies;
- tty->num_overrun = 0;
+ ldata->num_overrun);
+ ldata->overrun_time = jiffies;
+ ldata->num_overrun = 0;
}
}
@@ -1076,16 +1119,18 @@
static inline void n_tty_receive_parity_error(struct tty_struct *tty,
unsigned char c)
{
+ struct n_tty_data *ldata = tty->disc_data;
+
if (I_IGNPAR(tty))
return;
if (I_PARMRK(tty)) {
- put_tty_queue('\377', tty);
- put_tty_queue('\0', tty);
- put_tty_queue(c, tty);
+ put_tty_queue('\377', ldata);
+ put_tty_queue('\0', ldata);
+ put_tty_queue(c, ldata);
} else if (I_INPCK(tty))
- put_tty_queue('\0', tty);
+ put_tty_queue('\0', ldata);
else
- put_tty_queue(c, tty);
+ put_tty_queue(c, ldata);
wake_up_interruptible(&tty->read_wait);
}
@@ -1101,11 +1146,12 @@
static inline void n_tty_receive_char(struct tty_struct *tty, unsigned char c)
{
+ struct n_tty_data *ldata = tty->disc_data;
unsigned long flags;
int parmrk;
- if (tty->raw) {
- put_tty_queue(c, tty);
+ if (ldata->raw) {
+ put_tty_queue(c, ldata);
return;
}
@@ -1115,7 +1161,7 @@
c = tolower(c);
if (L_EXTPROC(tty)) {
- put_tty_queue(c, tty);
+ put_tty_queue(c, ldata);
return;
}
@@ -1143,26 +1189,26 @@
* handle specially, do shortcut processing to speed things
* up.
*/
- if (!test_bit(c, tty->process_char_map) || tty->lnext) {
- tty->lnext = 0;
+ if (!test_bit(c, ldata->process_char_map) || ldata->lnext) {
+ ldata->lnext = 0;
parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty)) ? 1 : 0;
- if (tty->read_cnt >= (N_TTY_BUF_SIZE - parmrk - 1)) {
+ if (ldata->read_cnt >= (N_TTY_BUF_SIZE - parmrk - 1)) {
/* beep if no space */
if (L_ECHO(tty))
process_output('\a', tty);
return;
}
if (L_ECHO(tty)) {
- finish_erasing(tty);
+ finish_erasing(ldata);
/* Record the column of first canon char. */
- if (tty->canon_head == tty->read_head)
- echo_set_canon_col(tty);
+ if (ldata->canon_head == ldata->read_head)
+ echo_set_canon_col(ldata);
echo_char(c, tty);
process_echoes(tty);
}
if (parmrk)
- put_tty_queue(c, tty);
- put_tty_queue(c, tty);
+ put_tty_queue(c, ldata);
+ put_tty_queue(c, ldata);
return;
}
@@ -1218,7 +1264,7 @@
} else if (c == '\n' && I_INLCR(tty))
c = '\r';
- if (tty->icanon) {
+ if (ldata->icanon) {
if (c == ERASE_CHAR(tty) || c == KILL_CHAR(tty) ||
(c == WERASE_CHAR(tty) && L_IEXTEN(tty))) {
eraser(c, tty);
@@ -1226,12 +1272,12 @@
return;
}
if (c == LNEXT_CHAR(tty) && L_IEXTEN(tty)) {
- tty->lnext = 1;
+ ldata->lnext = 1;
if (L_ECHO(tty)) {
- finish_erasing(tty);
+ finish_erasing(ldata);
if (L_ECHOCTL(tty)) {
- echo_char_raw('^', tty);
- echo_char_raw('\b', tty);
+ echo_char_raw('^', ldata);
+ echo_char_raw('\b', ldata);
process_echoes(tty);
}
}
@@ -1239,34 +1285,34 @@
}
if (c == REPRINT_CHAR(tty) && L_ECHO(tty) &&
L_IEXTEN(tty)) {
- unsigned long tail = tty->canon_head;
+ unsigned long tail = ldata->canon_head;
- finish_erasing(tty);
+ finish_erasing(ldata);
echo_char(c, tty);
- echo_char_raw('\n', tty);
- while (tail != tty->read_head) {
- echo_char(tty->read_buf[tail], tty);
+ echo_char_raw('\n', ldata);
+ while (tail != ldata->read_head) {
+ echo_char(ldata->read_buf[tail], tty);
tail = (tail+1) & (N_TTY_BUF_SIZE-1);
}
process_echoes(tty);
return;
}
if (c == '\n') {
- if (tty->read_cnt >= N_TTY_BUF_SIZE) {
+ if (ldata->read_cnt >= N_TTY_BUF_SIZE) {
if (L_ECHO(tty))
process_output('\a', tty);
return;
}
if (L_ECHO(tty) || L_ECHONL(tty)) {
- echo_char_raw('\n', tty);
+ echo_char_raw('\n', ldata);
process_echoes(tty);
}
goto handle_newline;
}
if (c == EOF_CHAR(tty)) {
- if (tty->read_cnt >= N_TTY_BUF_SIZE)
+ if (ldata->read_cnt >= N_TTY_BUF_SIZE)
return;
- if (tty->canon_head != tty->read_head)
+ if (ldata->canon_head != ldata->read_head)
set_bit(TTY_PUSH, &tty->flags);
c = __DISABLED_CHAR;
goto handle_newline;
@@ -1275,7 +1321,7 @@
(c == EOL2_CHAR(tty) && L_IEXTEN(tty))) {
parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty))
? 1 : 0;
- if (tty->read_cnt >= (N_TTY_BUF_SIZE - parmrk)) {
+ if (ldata->read_cnt >= (N_TTY_BUF_SIZE - parmrk)) {
if (L_ECHO(tty))
process_output('\a', tty);
return;
@@ -1285,8 +1331,8 @@
*/
if (L_ECHO(tty)) {
/* Record the column of first canon char. */
- if (tty->canon_head == tty->read_head)
- echo_set_canon_col(tty);
+ if (ldata->canon_head == ldata->read_head)
+ echo_set_canon_col(ldata);
echo_char(c, tty);
process_echoes(tty);
}
@@ -1295,15 +1341,15 @@
* EOL_CHAR and EOL2_CHAR?
*/
if (parmrk)
- put_tty_queue(c, tty);
+ put_tty_queue(c, ldata);
handle_newline:
- spin_lock_irqsave(&tty->read_lock, flags);
- set_bit(tty->read_head, tty->read_flags);
- put_tty_queue_nolock(c, tty);
- tty->canon_head = tty->read_head;
- tty->canon_data++;
- spin_unlock_irqrestore(&tty->read_lock, flags);
+ spin_lock_irqsave(&ldata->read_lock, flags);
+ set_bit(ldata->read_head, ldata->read_flags);
+ put_tty_queue_nolock(c, ldata);
+ ldata->canon_head = ldata->read_head;
+ ldata->canon_data++;
+ spin_unlock_irqrestore(&ldata->read_lock, flags);
kill_fasync(&tty->fasync, SIGIO, POLL_IN);
if (waitqueue_active(&tty->read_wait))
wake_up_interruptible(&tty->read_wait);
@@ -1312,29 +1358,29 @@
}
parmrk = (c == (unsigned char) '\377' && I_PARMRK(tty)) ? 1 : 0;
- if (tty->read_cnt >= (N_TTY_BUF_SIZE - parmrk - 1)) {
+ if (ldata->read_cnt >= (N_TTY_BUF_SIZE - parmrk - 1)) {
/* beep if no space */
if (L_ECHO(tty))
process_output('\a', tty);
return;
}
if (L_ECHO(tty)) {
- finish_erasing(tty);
+ finish_erasing(ldata);
if (c == '\n')
- echo_char_raw('\n', tty);
+ echo_char_raw('\n', ldata);
else {
/* Record the column of first canon char. */
- if (tty->canon_head == tty->read_head)
- echo_set_canon_col(tty);
+ if (ldata->canon_head == ldata->read_head)
+ echo_set_canon_col(ldata);
echo_char(c, tty);
}
process_echoes(tty);
}
if (parmrk)
- put_tty_queue(c, tty);
+ put_tty_queue(c, ldata);
- put_tty_queue(c, tty);
+ put_tty_queue(c, ldata);
}
@@ -1369,33 +1415,31 @@
static void n_tty_receive_buf(struct tty_struct *tty, const unsigned char *cp,
char *fp, int count)
{
+ struct n_tty_data *ldata = tty->disc_data;
const unsigned char *p;
char *f, flags = TTY_NORMAL;
int i;
char buf[64];
unsigned long cpuflags;
- if (!tty->read_buf)
- return;
-
- if (tty->real_raw) {
- spin_lock_irqsave(&tty->read_lock, cpuflags);
- i = min(N_TTY_BUF_SIZE - tty->read_cnt,
- N_TTY_BUF_SIZE - tty->read_head);
+ if (ldata->real_raw) {
+ spin_lock_irqsave(&ldata->read_lock, cpuflags);
+ i = min(N_TTY_BUF_SIZE - ldata->read_cnt,
+ N_TTY_BUF_SIZE - ldata->read_head);
i = min(count, i);
- memcpy(tty->read_buf + tty->read_head, cp, i);
- tty->read_head = (tty->read_head + i) & (N_TTY_BUF_SIZE-1);
- tty->read_cnt += i;
+ memcpy(ldata->read_buf + ldata->read_head, cp, i);
+ ldata->read_head = (ldata->read_head + i) & (N_TTY_BUF_SIZE-1);
+ ldata->read_cnt += i;
cp += i;
count -= i;
- i = min(N_TTY_BUF_SIZE - tty->read_cnt,
- N_TTY_BUF_SIZE - tty->read_head);
+ i = min(N_TTY_BUF_SIZE - ldata->read_cnt,
+ N_TTY_BUF_SIZE - ldata->read_head);
i = min(count, i);
- memcpy(tty->read_buf + tty->read_head, cp, i);
- tty->read_head = (tty->read_head + i) & (N_TTY_BUF_SIZE-1);
- tty->read_cnt += i;
- spin_unlock_irqrestore(&tty->read_lock, cpuflags);
+ memcpy(ldata->read_buf + ldata->read_head, cp, i);
+ ldata->read_head = (ldata->read_head + i) & (N_TTY_BUF_SIZE-1);
+ ldata->read_cnt += i;
+ spin_unlock_irqrestore(&ldata->read_lock, cpuflags);
} else {
for (i = count, p = cp, f = fp; i; i--, p++) {
if (f)
@@ -1426,7 +1470,7 @@
n_tty_set_room(tty);
- if ((!tty->icanon && (tty->read_cnt >= tty->minimum_to_wake)) ||
+ if ((!ldata->icanon && (ldata->read_cnt >= tty->minimum_to_wake)) ||
L_EXTPROC(tty)) {
kill_fasync(&tty->fasync, SIGIO, POLL_IN);
if (waitqueue_active(&tty->read_wait))
@@ -1470,25 +1514,25 @@
static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old)
{
+ struct n_tty_data *ldata = tty->disc_data;
int canon_change = 1;
- BUG_ON(!tty);
if (old)
canon_change = (old->c_lflag ^ tty->termios.c_lflag) & ICANON;
if (canon_change) {
- memset(&tty->read_flags, 0, sizeof tty->read_flags);
- tty->canon_head = tty->read_tail;
- tty->canon_data = 0;
- tty->erasing = 0;
+ bitmap_zero(ldata->read_flags, N_TTY_BUF_SIZE);
+ ldata->canon_head = ldata->read_tail;
+ ldata->canon_data = 0;
+ ldata->erasing = 0;
}
- if (canon_change && !L_ICANON(tty) && tty->read_cnt)
+ if (canon_change && !L_ICANON(tty) && ldata->read_cnt)
wake_up_interruptible(&tty->read_wait);
- tty->icanon = (L_ICANON(tty) != 0);
+ ldata->icanon = (L_ICANON(tty) != 0);
if (test_bit(TTY_HW_COOK_IN, &tty->flags)) {
- tty->raw = 1;
- tty->real_raw = 1;
+ ldata->raw = 1;
+ ldata->real_raw = 1;
n_tty_set_room(tty);
return;
}
@@ -1496,51 +1540,51 @@
I_ICRNL(tty) || I_INLCR(tty) || L_ICANON(tty) ||
I_IXON(tty) || L_ISIG(tty) || L_ECHO(tty) ||
I_PARMRK(tty)) {
- memset(tty->process_char_map, 0, 256/8);
+ bitmap_zero(ldata->process_char_map, 256);
if (I_IGNCR(tty) || I_ICRNL(tty))
- set_bit('\r', tty->process_char_map);
+ set_bit('\r', ldata->process_char_map);
if (I_INLCR(tty))
- set_bit('\n', tty->process_char_map);
+ set_bit('\n', ldata->process_char_map);
if (L_ICANON(tty)) {
- set_bit(ERASE_CHAR(tty), tty->process_char_map);
- set_bit(KILL_CHAR(tty), tty->process_char_map);
- set_bit(EOF_CHAR(tty), tty->process_char_map);
- set_bit('\n', tty->process_char_map);
- set_bit(EOL_CHAR(tty), tty->process_char_map);
+ set_bit(ERASE_CHAR(tty), ldata->process_char_map);
+ set_bit(KILL_CHAR(tty), ldata->process_char_map);
+ set_bit(EOF_CHAR(tty), ldata->process_char_map);
+ set_bit('\n', ldata->process_char_map);
+ set_bit(EOL_CHAR(tty), ldata->process_char_map);
if (L_IEXTEN(tty)) {
set_bit(WERASE_CHAR(tty),
- tty->process_char_map);
+ ldata->process_char_map);
set_bit(LNEXT_CHAR(tty),
- tty->process_char_map);
+ ldata->process_char_map);
set_bit(EOL2_CHAR(tty),
- tty->process_char_map);
+ ldata->process_char_map);
if (L_ECHO(tty))
set_bit(REPRINT_CHAR(tty),
- tty->process_char_map);
+ ldata->process_char_map);
}
}
if (I_IXON(tty)) {
- set_bit(START_CHAR(tty), tty->process_char_map);
- set_bit(STOP_CHAR(tty), tty->process_char_map);
+ set_bit(START_CHAR(tty), ldata->process_char_map);
+ set_bit(STOP_CHAR(tty), ldata->process_char_map);
}
if (L_ISIG(tty)) {
- set_bit(INTR_CHAR(tty), tty->process_char_map);
- set_bit(QUIT_CHAR(tty), tty->process_char_map);
- set_bit(SUSP_CHAR(tty), tty->process_char_map);
+ set_bit(INTR_CHAR(tty), ldata->process_char_map);
+ set_bit(QUIT_CHAR(tty), ldata->process_char_map);
+ set_bit(SUSP_CHAR(tty), ldata->process_char_map);
}
- clear_bit(__DISABLED_CHAR, tty->process_char_map);
- tty->raw = 0;
- tty->real_raw = 0;
+ clear_bit(__DISABLED_CHAR, ldata->process_char_map);
+ ldata->raw = 0;
+ ldata->real_raw = 0;
} else {
- tty->raw = 1;
+ ldata->raw = 1;
if ((I_IGNBRK(tty) || (!I_BRKINT(tty) && !I_PARMRK(tty))) &&
(I_IGNPAR(tty) || !I_INPCK(tty)) &&
(tty->driver->flags & TTY_DRIVER_REAL_RAW))
- tty->real_raw = 1;
+ ldata->real_raw = 1;
else
- tty->real_raw = 0;
+ ldata->real_raw = 0;
}
n_tty_set_room(tty);
/* The termios change make the tty ready for I/O */
@@ -1560,15 +1604,13 @@
static void n_tty_close(struct tty_struct *tty)
{
+ struct n_tty_data *ldata = tty->disc_data;
+
n_tty_flush_buffer(tty);
- if (tty->read_buf) {
- kfree(tty->read_buf);
- tty->read_buf = NULL;
- }
- if (tty->echo_buf) {
- kfree(tty->echo_buf);
- tty->echo_buf = NULL;
- }
+ kfree(ldata->read_buf);
+ kfree(ldata->echo_buf);
+ kfree(ldata);
+ tty->disc_data = NULL;
}
/**
@@ -1583,37 +1625,50 @@
static int n_tty_open(struct tty_struct *tty)
{
- if (!tty)
- return -EINVAL;
+ struct n_tty_data *ldata;
+
+ ldata = kzalloc(sizeof(*ldata), GFP_KERNEL);
+ if (!ldata)
+ goto err;
+
+ ldata->overrun_time = jiffies;
+ mutex_init(&ldata->atomic_read_lock);
+ mutex_init(&ldata->output_lock);
+ mutex_init(&ldata->echo_lock);
+ spin_lock_init(&ldata->read_lock);
/* These are ugly. Currently a malloc failure here can panic */
- if (!tty->read_buf) {
- tty->read_buf = kzalloc(N_TTY_BUF_SIZE, GFP_KERNEL);
- if (!tty->read_buf)
- return -ENOMEM;
- }
- if (!tty->echo_buf) {
- tty->echo_buf = kzalloc(N_TTY_BUF_SIZE, GFP_KERNEL);
+ ldata->read_buf = kzalloc(N_TTY_BUF_SIZE, GFP_KERNEL);
+ ldata->echo_buf = kzalloc(N_TTY_BUF_SIZE, GFP_KERNEL);
+ if (!ldata->read_buf || !ldata->echo_buf)
+ goto err_free_bufs;
- if (!tty->echo_buf)
- return -ENOMEM;
- }
+ tty->disc_data = ldata;
reset_buffer_flags(tty);
tty_unthrottle(tty);
- tty->column = 0;
+ ldata->column = 0;
n_tty_set_termios(tty, NULL);
tty->minimum_to_wake = 1;
tty->closing = 0;
+
return 0;
+err_free_bufs:
+ kfree(ldata->read_buf);
+ kfree(ldata->echo_buf);
+ kfree(ldata);
+err:
+ return -ENOMEM;
}
static inline int input_available_p(struct tty_struct *tty, int amt)
{
+ struct n_tty_data *ldata = tty->disc_data;
+
tty_flush_to_ldisc(tty);
- if (tty->icanon && !L_EXTPROC(tty)) {
- if (tty->canon_data)
+ if (ldata->icanon && !L_EXTPROC(tty)) {
+ if (ldata->canon_data)
return 1;
- } else if (tty->read_cnt >= (amt ? amt : 1))
+ } else if (ldata->read_cnt >= (amt ? amt : 1))
return 1;
return 0;
@@ -1632,7 +1687,7 @@
* buffer, and once to drain the space from the (physical) beginning of
* the buffer to head pointer.
*
- * Called under the tty->atomic_read_lock sem
+ * Called under the ldata->atomic_read_lock sem
*
*/
@@ -1641,29 +1696,31 @@
size_t *nr)
{
+ struct n_tty_data *ldata = tty->disc_data;
int retval;
size_t n;
unsigned long flags;
bool is_eof;
retval = 0;
- spin_lock_irqsave(&tty->read_lock, flags);
- n = min(tty->read_cnt, N_TTY_BUF_SIZE - tty->read_tail);
+ spin_lock_irqsave(&ldata->read_lock, flags);
+ n = min(ldata->read_cnt, N_TTY_BUF_SIZE - ldata->read_tail);
n = min(*nr, n);
- spin_unlock_irqrestore(&tty->read_lock, flags);
+ spin_unlock_irqrestore(&ldata->read_lock, flags);
if (n) {
- retval = copy_to_user(*b, &tty->read_buf[tty->read_tail], n);
+ retval = copy_to_user(*b, &ldata->read_buf[ldata->read_tail], n);
n -= retval;
is_eof = n == 1 &&
- tty->read_buf[tty->read_tail] == EOF_CHAR(tty);
- tty_audit_add_data(tty, &tty->read_buf[tty->read_tail], n);
- spin_lock_irqsave(&tty->read_lock, flags);
- tty->read_tail = (tty->read_tail + n) & (N_TTY_BUF_SIZE-1);
- tty->read_cnt -= n;
+ ldata->read_buf[ldata->read_tail] == EOF_CHAR(tty);
+ tty_audit_add_data(tty, &ldata->read_buf[ldata->read_tail], n,
+ ldata->icanon);
+ spin_lock_irqsave(&ldata->read_lock, flags);
+ ldata->read_tail = (ldata->read_tail + n) & (N_TTY_BUF_SIZE-1);
+ ldata->read_cnt -= n;
/* Turn single EOF into zero-length read */
- if (L_EXTPROC(tty) && tty->icanon && is_eof && !tty->read_cnt)
+ if (L_EXTPROC(tty) && ldata->icanon && is_eof && !ldata->read_cnt)
n = 0;
- spin_unlock_irqrestore(&tty->read_lock, flags);
+ spin_unlock_irqrestore(&ldata->read_lock, flags);
*b += n;
*nr -= n;
}
@@ -1730,6 +1787,7 @@
static ssize_t n_tty_read(struct tty_struct *tty, struct file *file,
unsigned char __user *buf, size_t nr)
{
+ struct n_tty_data *ldata = tty->disc_data;
unsigned char __user *b = buf;
DECLARE_WAITQUEUE(wait, current);
int c;
@@ -1741,17 +1799,13 @@
int packet;
do_it_again:
-
- if (WARN_ON(!tty->read_buf))
- return -EAGAIN;
-
c = job_control(tty, file);
if (c < 0)
return c;
minimum = time = 0;
timeout = MAX_SCHEDULE_TIMEOUT;
- if (!tty->icanon) {
+ if (!ldata->icanon) {
time = (HZ / 10) * TIME_CHAR(tty);
minimum = MIN_CHAR(tty);
if (minimum) {
@@ -1774,10 +1828,10 @@
* Internal serialization of reads.
*/
if (file->f_flags & O_NONBLOCK) {
- if (!mutex_trylock(&tty->atomic_read_lock))
+ if (!mutex_trylock(&ldata->atomic_read_lock))
return -EAGAIN;
} else {
- if (mutex_lock_interruptible(&tty->atomic_read_lock))
+ if (mutex_lock_interruptible(&ldata->atomic_read_lock))
return -ERESTARTSYS;
}
packet = tty->packet;
@@ -1830,7 +1884,6 @@
/* FIXME: does n_tty_set_room need locking ? */
n_tty_set_room(tty);
timeout = schedule_timeout(timeout);
- BUG_ON(!tty->read_buf);
continue;
}
__set_current_state(TASK_RUNNING);
@@ -1845,45 +1898,45 @@
nr--;
}
- if (tty->icanon && !L_EXTPROC(tty)) {
+ if (ldata->icanon && !L_EXTPROC(tty)) {
/* N.B. avoid overrun if nr == 0 */
- spin_lock_irqsave(&tty->read_lock, flags);
- while (nr && tty->read_cnt) {
+ spin_lock_irqsave(&ldata->read_lock, flags);
+ while (nr && ldata->read_cnt) {
int eol;
- eol = test_and_clear_bit(tty->read_tail,
- tty->read_flags);
- c = tty->read_buf[tty->read_tail];
- tty->read_tail = ((tty->read_tail+1) &
+ eol = test_and_clear_bit(ldata->read_tail,
+ ldata->read_flags);
+ c = ldata->read_buf[ldata->read_tail];
+ ldata->read_tail = ((ldata->read_tail+1) &
(N_TTY_BUF_SIZE-1));
- tty->read_cnt--;
+ ldata->read_cnt--;
if (eol) {
/* this test should be redundant:
* we shouldn't be reading data if
* canon_data is 0
*/
- if (--tty->canon_data < 0)
- tty->canon_data = 0;
+ if (--ldata->canon_data < 0)
+ ldata->canon_data = 0;
}
- spin_unlock_irqrestore(&tty->read_lock, flags);
+ spin_unlock_irqrestore(&ldata->read_lock, flags);
if (!eol || (c != __DISABLED_CHAR)) {
if (tty_put_user(tty, c, b++)) {
retval = -EFAULT;
b--;
- spin_lock_irqsave(&tty->read_lock, flags);
+ spin_lock_irqsave(&ldata->read_lock, flags);
break;
}
nr--;
}
if (eol) {
tty_audit_push(tty);
- spin_lock_irqsave(&tty->read_lock, flags);
+ spin_lock_irqsave(&ldata->read_lock, flags);
break;
}
- spin_lock_irqsave(&tty->read_lock, flags);
+ spin_lock_irqsave(&ldata->read_lock, flags);
}
- spin_unlock_irqrestore(&tty->read_lock, flags);
+ spin_unlock_irqrestore(&ldata->read_lock, flags);
if (retval)
break;
} else {
@@ -1915,7 +1968,7 @@
if (time)
timeout = time;
}
- mutex_unlock(&tty->atomic_read_lock);
+ mutex_unlock(&ldata->atomic_read_lock);
remove_wait_queue(&tty->read_wait, &wait);
if (!waitqueue_active(&tty->read_wait))
@@ -2076,19 +2129,19 @@
return mask;
}
-static unsigned long inq_canon(struct tty_struct *tty)
+static unsigned long inq_canon(struct n_tty_data *ldata)
{
int nr, head, tail;
- if (!tty->canon_data)
+ if (!ldata->canon_data)
return 0;
- head = tty->canon_head;
- tail = tty->read_tail;
+ head = ldata->canon_head;
+ tail = ldata->read_tail;
nr = (head - tail) & (N_TTY_BUF_SIZE-1);
/* Skip EOF-chars.. */
while (head != tail) {
- if (test_bit(tail, tty->read_flags) &&
- tty->read_buf[tail] == __DISABLED_CHAR)
+ if (test_bit(tail, ldata->read_flags) &&
+ ldata->read_buf[tail] == __DISABLED_CHAR)
nr--;
tail = (tail+1) & (N_TTY_BUF_SIZE-1);
}
@@ -2098,6 +2151,7 @@
static int n_tty_ioctl(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg)
{
+ struct n_tty_data *ldata = tty->disc_data;
int retval;
switch (cmd) {
@@ -2105,9 +2159,9 @@
return put_user(tty_chars_in_buffer(tty), (int __user *) arg);
case TIOCINQ:
/* FIXME: Locking */
- retval = tty->read_cnt;
+ retval = ldata->read_cnt;
if (L_ICANON(tty))
- retval = inq_canon(tty);
+ retval = inq_canon(ldata);
return put_user(retval, (unsigned int __user *) arg);
default:
return n_tty_ioctl_helper(tty, file, cmd, arg);
diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c
index a82b399..4219f04 100644
--- a/drivers/tty/pty.c
+++ b/drivers/tty/pty.c
@@ -4,9 +4,6 @@
* Added support for a Unix98-style ptmx device.
* -- C. Scott Ananian <cananian@alumni.princeton.edu>, 14-Jan-1998
*
- * When reading this code see also fs/devpts. In particular note that the
- * driver_data field is used by the devpts side as a binding to the devpts
- * inode.
*/
#include <linux/module.h>
@@ -59,7 +56,7 @@
#ifdef CONFIG_UNIX98_PTYS
if (tty->driver == ptm_driver) {
mutex_lock(&devpts_mutex);
- devpts_pty_kill(tty->link);
+ devpts_pty_kill(tty->link->driver_data);
mutex_unlock(&devpts_mutex);
}
#endif
@@ -96,7 +93,7 @@
static int pty_space(struct tty_struct *to)
{
- int n = 8192 - to->buf.memory_used;
+ int n = 8192 - to->port->buf.memory_used;
if (n < 0)
return 0;
return n;
@@ -348,6 +345,7 @@
tty_port_init(ports[1]);
o_tty->port = ports[0];
tty->port = ports[1];
+ o_tty->port->itty = o_tty;
tty_driver_kref_get(driver);
tty->count++;
@@ -366,8 +364,15 @@
return retval;
}
+/* this is called once with whichever end is closed last */
+static void pty_unix98_shutdown(struct tty_struct *tty)
+{
+ devpts_kill_index(tty->driver_data, tty->index);
+}
+
static void pty_cleanup(struct tty_struct *tty)
{
+ tty->port->itty = NULL;
kfree(tty->port);
}
@@ -547,7 +552,7 @@
struct tty_struct *tty;
mutex_lock(&devpts_mutex);
- tty = devpts_get_tty(pts_inode, idx);
+ tty = devpts_get_priv(pts_inode);
mutex_unlock(&devpts_mutex);
/* Master must be open before slave */
if (!tty)
@@ -581,6 +586,7 @@
.set_termios = pty_set_termios,
.ioctl = pty_unix98_ioctl,
.resize = pty_resize,
+ .shutdown = pty_unix98_shutdown,
.cleanup = pty_cleanup
};
@@ -596,6 +602,7 @@
.chars_in_buffer = pty_chars_in_buffer,
.unthrottle = pty_unthrottle,
.set_termios = pty_set_termios,
+ .shutdown = pty_unix98_shutdown,
.cleanup = pty_cleanup,
};
@@ -614,6 +621,7 @@
static int ptmx_open(struct inode *inode, struct file *filp)
{
struct tty_struct *tty;
+ struct inode *slave_inode;
int retval;
int index;
@@ -650,15 +658,21 @@
tty_add_file(tty, filp);
- retval = devpts_pty_new(inode, tty->link);
- if (retval)
+ slave_inode = devpts_pty_new(inode,
+ MKDEV(UNIX98_PTY_SLAVE_MAJOR, index), index,
+ tty->link);
+ if (IS_ERR(slave_inode)) {
+ retval = PTR_ERR(slave_inode);
goto err_release;
+ }
retval = ptm_driver->ops->open(tty, filp);
if (retval)
goto err_release;
tty_unlock(tty);
+ tty->driver_data = inode;
+ tty->link->driver_data = slave_inode;
return 0;
err_release:
tty_unlock(tty);
diff --git a/drivers/tty/serial/8250/8250.c b/drivers/tty/serial/8250/8250.c
index 3ba4234..5ccbd90 100644
--- a/drivers/tty/serial/8250/8250.c
+++ b/drivers/tty/serial/8250/8250.c
@@ -2349,16 +2349,14 @@
serial_port_out(port, UART_EFR, efr);
}
-#ifdef CONFIG_ARCH_OMAP1
/* Workaround to enable 115200 baud on OMAP1510 internal ports */
- if (cpu_is_omap1510() && is_omap_port(up)) {
+ if (is_omap1510_8250(up)) {
if (baud == 115200) {
quot = 1;
serial_port_out(port, UART_OMAP_OSC_12M_SEL, 1);
} else
serial_port_out(port, UART_OMAP_OSC_12M_SEL, 0);
}
-#endif
/*
* For NatSemi, switch to bank 2 not bank 1, to avoid resetting EXCR2,
@@ -2439,10 +2437,9 @@
{
if (pt->port.iotype == UPIO_AU)
return 0x1000;
-#ifdef CONFIG_ARCH_OMAP1
- if (is_omap_port(pt))
+ if (is_omap1_8250(pt))
return 0x16 << pt->port.regshift;
-#endif
+
return 8 << pt->port.regshift;
}
diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h
index 5a76f9c..3b4ea84 100644
--- a/drivers/tty/serial/8250/8250.h
+++ b/drivers/tty/serial/8250/8250.h
@@ -106,3 +106,39 @@
static inline void serial8250_pnp_exit(void) { }
#endif
+#ifdef CONFIG_ARCH_OMAP1
+static inline int is_omap1_8250(struct uart_8250_port *pt)
+{
+ int res;
+
+ switch (pt->port.mapbase) {
+ case OMAP1_UART1_BASE:
+ case OMAP1_UART2_BASE:
+ case OMAP1_UART3_BASE:
+ res = 1;
+ break;
+ default:
+ res = 0;
+ break;
+ }
+
+ return res;
+}
+
+static inline int is_omap1510_8250(struct uart_8250_port *pt)
+{
+ if (!cpu_is_omap1510())
+ return 0;
+
+ return is_omap1_8250(pt);
+}
+#else
+static inline int is_omap1_8250(struct uart_8250_port *pt)
+{
+ return 0;
+}
+static inline int is_omap1510_8250(struct uart_8250_port *pt)
+{
+ return 0;
+}
+#endif
diff --git a/drivers/tty/serial/8250/8250_early.c b/drivers/tty/serial/8250/8250_early.c
index eaafb98..843a150 100644
--- a/drivers/tty/serial/8250/8250_early.c
+++ b/drivers/tty/serial/8250/8250_early.c
@@ -140,7 +140,7 @@
serial_out(port, UART_FCR, 0); /* no fifo */
serial_out(port, UART_MCR, 0x3); /* DTR + RTS */
- divisor = port->uartclk / (16 * device->baud);
+ divisor = DIV_ROUND_CLOSEST(port->uartclk, 16 * device->baud);
c = serial_in(port, UART_LCR);
serial_out(port, UART_LCR, c | UART_LCR_DLAB);
serial_out(port, UART_DLL, divisor & 0xff);
diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c
index 2bc28a5..1ab1d2c 100644
--- a/drivers/tty/serial/max310x.c
+++ b/drivers/tty/serial/max310x.c
@@ -1239,6 +1239,7 @@
static const struct spi_device_id max310x_id_table[] = {
{ "max3107", MAX310X_TYPE_MAX3107 },
{ "max3108", MAX310X_TYPE_MAX3108 },
+ { }
};
MODULE_DEVICE_TABLE(spi, max310x_id_table);
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index 6ede6fd..6d3d26a 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -671,19 +671,19 @@
/*
* IXON Flag:
- * Flow control for OMAP.TX
- * OMAP.RX should listen for XON/XOFF
+ * Enable XON/XOFF flow control on output.
+ * Transmit XON1, XOFF1
*/
if (termios->c_iflag & IXON)
- up->efr |= OMAP_UART_SW_RX;
+ up->efr |= OMAP_UART_SW_TX;
/*
* IXOFF Flag:
- * Flow control for OMAP.RX
- * OMAP.TX should send XON/XOFF
+ * Enable XON/XOFF flow control on input.
+ * Receiver compares XON1, XOFF1.
*/
if (termios->c_iflag & IXOFF)
- up->efr |= OMAP_UART_SW_TX;
+ up->efr |= OMAP_UART_SW_RX;
serial_out(up, UART_EFR, up->efr | UART_EFR_ECB);
serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index 7f04717..740458c 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -530,16 +530,16 @@
switch (level) {
case 3:
if (!IS_ERR(ourport->baudclk))
- clk_disable(ourport->baudclk);
+ clk_disable_unprepare(ourport->baudclk);
- clk_disable(ourport->clk);
+ clk_disable_unprepare(ourport->clk);
break;
case 0:
- clk_enable(ourport->clk);
+ clk_prepare_enable(ourport->clk);
if (!IS_ERR(ourport->baudclk))
- clk_enable(ourport->baudclk);
+ clk_prepare_enable(ourport->baudclk);
break;
default:
@@ -713,11 +713,11 @@
s3c24xx_serial_setsource(port, clk_sel);
if (!IS_ERR(ourport->baudclk)) {
- clk_disable(ourport->baudclk);
+ clk_disable_unprepare(ourport->baudclk);
ourport->baudclk = ERR_PTR(-EINVAL);
}
- clk_enable(clk);
+ clk_prepare_enable(clk);
ourport->baudclk = clk;
ourport->baudclk_rate = clk ? clk_get_rate(clk) : 0;
@@ -1287,9 +1287,9 @@
struct s3c24xx_uart_port *ourport = to_ourport(port);
if (port) {
- clk_enable(ourport->clk);
+ clk_prepare_enable(ourport->clk);
s3c24xx_serial_resetport(port, s3c24xx_port_to_cfg(port));
- clk_disable(ourport->clk);
+ clk_disable_unprepare(ourport->clk);
uart_resume_port(&s3c24xx_uart_drv, port);
}
diff --git a/drivers/tty/tty_audit.c b/drivers/tty/tty_audit.c
index b0b39b8..6953dc8 100644
--- a/drivers/tty/tty_audit.c
+++ b/drivers/tty/tty_audit.c
@@ -23,7 +23,7 @@
};
static struct tty_audit_buf *tty_audit_buf_alloc(int major, int minor,
- int icanon)
+ unsigned icanon)
{
struct tty_audit_buf *buf;
@@ -239,7 +239,8 @@
* if TTY auditing is disabled or out of memory. Otherwise, return a new
* reference to the buffer.
*/
-static struct tty_audit_buf *tty_audit_buf_get(struct tty_struct *tty)
+static struct tty_audit_buf *tty_audit_buf_get(struct tty_struct *tty,
+ unsigned icanon)
{
struct tty_audit_buf *buf, *buf2;
@@ -257,7 +258,7 @@
buf2 = tty_audit_buf_alloc(tty->driver->major,
tty->driver->minor_start + tty->index,
- tty->icanon);
+ icanon);
if (buf2 == NULL) {
audit_log_lost("out of memory in TTY auditing");
return NULL;
@@ -287,7 +288,7 @@
* Audit @data of @size from @tty, if necessary.
*/
void tty_audit_add_data(struct tty_struct *tty, unsigned char *data,
- size_t size)
+ size_t size, unsigned icanon)
{
struct tty_audit_buf *buf;
int major, minor;
@@ -299,7 +300,7 @@
&& tty->driver->subtype == PTY_TYPE_MASTER)
return;
- buf = tty_audit_buf_get(tty);
+ buf = tty_audit_buf_get(tty, icanon);
if (!buf)
return;
@@ -307,11 +308,11 @@
major = tty->driver->major;
minor = tty->driver->minor_start + tty->index;
if (buf->major != major || buf->minor != minor
- || buf->icanon != tty->icanon) {
+ || buf->icanon != icanon) {
tty_audit_buf_push_current(buf);
buf->major = major;
buf->minor = minor;
- buf->icanon = tty->icanon;
+ buf->icanon = icanon;
}
do {
size_t run;
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index 91e326f..6cf87d7 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -27,19 +27,21 @@
* Locking: none
*/
-void tty_buffer_free_all(struct tty_struct *tty)
+void tty_buffer_free_all(struct tty_port *port)
{
+ struct tty_bufhead *buf = &port->buf;
struct tty_buffer *thead;
- while ((thead = tty->buf.head) != NULL) {
- tty->buf.head = thead->next;
+
+ while ((thead = buf->head) != NULL) {
+ buf->head = thead->next;
kfree(thead);
}
- while ((thead = tty->buf.free) != NULL) {
- tty->buf.free = thead->next;
+ while ((thead = buf->free) != NULL) {
+ buf->free = thead->next;
kfree(thead);
}
- tty->buf.tail = NULL;
- tty->buf.memory_used = 0;
+ buf->tail = NULL;
+ buf->memory_used = 0;
}
/**
@@ -54,11 +56,11 @@
* Locking: Caller must hold tty->buf.lock
*/
-static struct tty_buffer *tty_buffer_alloc(struct tty_struct *tty, size_t size)
+static struct tty_buffer *tty_buffer_alloc(struct tty_port *port, size_t size)
{
struct tty_buffer *p;
- if (tty->buf.memory_used + size > 65536)
+ if (port->buf.memory_used + size > 65536)
return NULL;
p = kmalloc(sizeof(struct tty_buffer) + 2 * size, GFP_ATOMIC);
if (p == NULL)
@@ -70,7 +72,7 @@
p->read = 0;
p->char_buf_ptr = (char *)(p->data);
p->flag_buf_ptr = (unsigned char *)p->char_buf_ptr + size;
- tty->buf.memory_used += size;
+ port->buf.memory_used += size;
return p;
}
@@ -85,17 +87,19 @@
* Locking: Caller must hold tty->buf.lock
*/
-static void tty_buffer_free(struct tty_struct *tty, struct tty_buffer *b)
+static void tty_buffer_free(struct tty_port *port, struct tty_buffer *b)
{
+ struct tty_bufhead *buf = &port->buf;
+
/* Dumb strategy for now - should keep some stats */
- tty->buf.memory_used -= b->size;
- WARN_ON(tty->buf.memory_used < 0);
+ buf->memory_used -= b->size;
+ WARN_ON(buf->memory_used < 0);
if (b->size >= 512)
kfree(b);
else {
- b->next = tty->buf.free;
- tty->buf.free = b;
+ b->next = buf->free;
+ buf->free = b;
}
}
@@ -110,15 +114,16 @@
* Locking: Caller must hold tty->buf.lock
*/
-static void __tty_buffer_flush(struct tty_struct *tty)
+static void __tty_buffer_flush(struct tty_port *port)
{
+ struct tty_bufhead *buf = &port->buf;
struct tty_buffer *thead;
- while ((thead = tty->buf.head) != NULL) {
- tty->buf.head = thead->next;
- tty_buffer_free(tty, thead);
+ while ((thead = buf->head) != NULL) {
+ buf->head = thead->next;
+ tty_buffer_free(port, thead);
}
- tty->buf.tail = NULL;
+ buf->tail = NULL;
}
/**
@@ -134,21 +139,24 @@
void tty_buffer_flush(struct tty_struct *tty)
{
+ struct tty_port *port = tty->port;
+ struct tty_bufhead *buf = &port->buf;
unsigned long flags;
- spin_lock_irqsave(&tty->buf.lock, flags);
+
+ spin_lock_irqsave(&buf->lock, flags);
/* If the data is being pushed to the tty layer then we can't
process it here. Instead set a flag and the flush_to_ldisc
path will process the flush request before it exits */
- if (test_bit(TTY_FLUSHING, &tty->flags)) {
- set_bit(TTY_FLUSHPENDING, &tty->flags);
- spin_unlock_irqrestore(&tty->buf.lock, flags);
+ if (test_bit(TTYP_FLUSHING, &port->iflags)) {
+ set_bit(TTYP_FLUSHPENDING, &port->iflags);
+ spin_unlock_irqrestore(&buf->lock, flags);
wait_event(tty->read_wait,
- test_bit(TTY_FLUSHPENDING, &tty->flags) == 0);
+ test_bit(TTYP_FLUSHPENDING, &port->iflags) == 0);
return;
} else
- __tty_buffer_flush(tty);
- spin_unlock_irqrestore(&tty->buf.lock, flags);
+ __tty_buffer_flush(port);
+ spin_unlock_irqrestore(&buf->lock, flags);
}
/**
@@ -163,9 +171,9 @@
* Locking: Caller must hold tty->buf.lock
*/
-static struct tty_buffer *tty_buffer_find(struct tty_struct *tty, size_t size)
+static struct tty_buffer *tty_buffer_find(struct tty_port *port, size_t size)
{
- struct tty_buffer **tbh = &tty->buf.free;
+ struct tty_buffer **tbh = &port->buf.free;
while ((*tbh) != NULL) {
struct tty_buffer *t = *tbh;
if (t->size >= size) {
@@ -174,14 +182,14 @@
t->used = 0;
t->commit = 0;
t->read = 0;
- tty->buf.memory_used += t->size;
+ port->buf.memory_used += t->size;
return t;
}
tbh = &((*tbh)->next);
}
/* Round the buffer size out */
size = (size + 0xFF) & ~0xFF;
- return tty_buffer_alloc(tty, size);
+ return tty_buffer_alloc(port, size);
/* Should possibly check if this fails for the largest buffer we
have queued and recycle that ? */
}
@@ -192,29 +200,31 @@
*
* Make at least size bytes of linear space available for the tty
* buffer. If we fail return the size we managed to find.
- * Locking: Caller must hold tty->buf.lock
+ * Locking: Caller must hold port->buf.lock
*/
-static int __tty_buffer_request_room(struct tty_struct *tty, size_t size)
+static int __tty_buffer_request_room(struct tty_port *port, size_t size)
{
+ struct tty_bufhead *buf = &port->buf;
struct tty_buffer *b, *n;
int left;
/* OPTIMISATION: We could keep a per tty "zero" sized buffer to
remove this conditional if its worth it. This would be invisible
to the callers */
- if ((b = tty->buf.tail) != NULL)
+ b = buf->tail;
+ if (b != NULL)
left = b->size - b->used;
else
left = 0;
if (left < size) {
/* This is the slow path - looking for new buffers to use */
- if ((n = tty_buffer_find(tty, size)) != NULL) {
+ if ((n = tty_buffer_find(port, size)) != NULL) {
if (b != NULL) {
b->next = n;
b->commit = b->used;
} else
- tty->buf.head = n;
- tty->buf.tail = n;
+ buf->head = n;
+ buf->tail = n;
} else
size = left;
}
@@ -231,16 +241,17 @@
* Make at least size bytes of linear space available for the tty
* buffer. If we fail return the size we managed to find.
*
- * Locking: Takes tty->buf.lock
+ * Locking: Takes port->buf.lock
*/
int tty_buffer_request_room(struct tty_struct *tty, size_t size)
{
+ struct tty_port *port = tty->port;
unsigned long flags;
int length;
- spin_lock_irqsave(&tty->buf.lock, flags);
- length = __tty_buffer_request_room(tty, size);
- spin_unlock_irqrestore(&tty->buf.lock, flags);
+ spin_lock_irqsave(&port->buf.lock, flags);
+ length = __tty_buffer_request_room(port, size);
+ spin_unlock_irqrestore(&port->buf.lock, flags);
return length;
}
EXPORT_SYMBOL_GPL(tty_buffer_request_room);
@@ -255,12 +266,13 @@
* Queue a series of bytes to the tty buffering. All the characters
* passed are marked with the supplied flag. Returns the number added.
*
- * Locking: Called functions may take tty->buf.lock
+ * Locking: Called functions may take port->buf.lock
*/
int tty_insert_flip_string_fixed_flag(struct tty_struct *tty,
const unsigned char *chars, char flag, size_t size)
{
+ struct tty_bufhead *buf = &tty->port->buf;
int copied = 0;
do {
int goal = min_t(size_t, size - copied, TTY_BUFFER_PAGE);
@@ -268,18 +280,18 @@
unsigned long flags;
struct tty_buffer *tb;
- spin_lock_irqsave(&tty->buf.lock, flags);
- space = __tty_buffer_request_room(tty, goal);
- tb = tty->buf.tail;
+ spin_lock_irqsave(&buf->lock, flags);
+ space = __tty_buffer_request_room(tty->port, goal);
+ tb = buf->tail;
/* If there is no space then tb may be NULL */
if (unlikely(space == 0)) {
- spin_unlock_irqrestore(&tty->buf.lock, flags);
+ spin_unlock_irqrestore(&buf->lock, flags);
break;
}
memcpy(tb->char_buf_ptr + tb->used, chars, space);
memset(tb->flag_buf_ptr + tb->used, flag, space);
tb->used += space;
- spin_unlock_irqrestore(&tty->buf.lock, flags);
+ spin_unlock_irqrestore(&buf->lock, flags);
copied += space;
chars += space;
/* There is a small chance that we need to split the data over
@@ -300,12 +312,13 @@
* the flags array indicates the status of the character. Returns the
* number added.
*
- * Locking: Called functions may take tty->buf.lock
+ * Locking: Called functions may take port->buf.lock
*/
int tty_insert_flip_string_flags(struct tty_struct *tty,
const unsigned char *chars, const char *flags, size_t size)
{
+ struct tty_bufhead *buf = &tty->port->buf;
int copied = 0;
do {
int goal = min_t(size_t, size - copied, TTY_BUFFER_PAGE);
@@ -313,18 +326,18 @@
unsigned long __flags;
struct tty_buffer *tb;
- spin_lock_irqsave(&tty->buf.lock, __flags);
- space = __tty_buffer_request_room(tty, goal);
- tb = tty->buf.tail;
+ spin_lock_irqsave(&buf->lock, __flags);
+ space = __tty_buffer_request_room(tty->port, goal);
+ tb = buf->tail;
/* If there is no space then tb may be NULL */
if (unlikely(space == 0)) {
- spin_unlock_irqrestore(&tty->buf.lock, __flags);
+ spin_unlock_irqrestore(&buf->lock, __flags);
break;
}
memcpy(tb->char_buf_ptr + tb->used, chars, space);
memcpy(tb->flag_buf_ptr + tb->used, flags, space);
tb->used += space;
- spin_unlock_irqrestore(&tty->buf.lock, __flags);
+ spin_unlock_irqrestore(&buf->lock, __flags);
copied += space;
chars += space;
flags += space;
@@ -342,18 +355,23 @@
* Takes any pending buffers and transfers their ownership to the
* ldisc side of the queue. It then schedules those characters for
* processing by the line discipline.
+ * Note that this function can only be used when the low_latency flag
+ * is unset. Otherwise the workqueue won't be flushed.
*
- * Locking: Takes tty->buf.lock
+ * Locking: Takes port->buf.lock
*/
void tty_schedule_flip(struct tty_struct *tty)
{
+ struct tty_bufhead *buf = &tty->port->buf;
unsigned long flags;
- spin_lock_irqsave(&tty->buf.lock, flags);
- if (tty->buf.tail != NULL)
- tty->buf.tail->commit = tty->buf.tail->used;
- spin_unlock_irqrestore(&tty->buf.lock, flags);
- schedule_work(&tty->buf.work);
+ WARN_ON(tty->low_latency);
+
+ spin_lock_irqsave(&buf->lock, flags);
+ if (buf->tail != NULL)
+ buf->tail->commit = buf->tail->used;
+ spin_unlock_irqrestore(&buf->lock, flags);
+ schedule_work(&buf->work);
}
EXPORT_SYMBOL(tty_schedule_flip);
@@ -369,26 +387,27 @@
* that need their own block copy routines into the buffer. There is no
* guarantee the buffer is a DMA target!
*
- * Locking: May call functions taking tty->buf.lock
+ * Locking: May call functions taking port->buf.lock
*/
int tty_prepare_flip_string(struct tty_struct *tty, unsigned char **chars,
- size_t size)
+ size_t size)
{
+ struct tty_bufhead *buf = &tty->port->buf;
int space;
unsigned long flags;
struct tty_buffer *tb;
- spin_lock_irqsave(&tty->buf.lock, flags);
- space = __tty_buffer_request_room(tty, size);
+ spin_lock_irqsave(&buf->lock, flags);
+ space = __tty_buffer_request_room(tty->port, size);
- tb = tty->buf.tail;
+ tb = buf->tail;
if (likely(space)) {
*chars = tb->char_buf_ptr + tb->used;
memset(tb->flag_buf_ptr + tb->used, TTY_NORMAL, space);
tb->used += space;
}
- spin_unlock_irqrestore(&tty->buf.lock, flags);
+ spin_unlock_irqrestore(&buf->lock, flags);
return space;
}
EXPORT_SYMBOL_GPL(tty_prepare_flip_string);
@@ -406,26 +425,27 @@
* that need their own block copy routines into the buffer. There is no
* guarantee the buffer is a DMA target!
*
- * Locking: May call functions taking tty->buf.lock
+ * Locking: May call functions taking port->buf.lock
*/
int tty_prepare_flip_string_flags(struct tty_struct *tty,
unsigned char **chars, char **flags, size_t size)
{
+ struct tty_bufhead *buf = &tty->port->buf;
int space;
unsigned long __flags;
struct tty_buffer *tb;
- spin_lock_irqsave(&tty->buf.lock, __flags);
- space = __tty_buffer_request_room(tty, size);
+ spin_lock_irqsave(&buf->lock, __flags);
+ space = __tty_buffer_request_room(tty->port, size);
- tb = tty->buf.tail;
+ tb = buf->tail;
if (likely(space)) {
*chars = tb->char_buf_ptr + tb->used;
*flags = tb->flag_buf_ptr + tb->used;
tb->used += space;
}
- spin_unlock_irqrestore(&tty->buf.lock, __flags);
+ spin_unlock_irqrestore(&buf->lock, __flags);
return space;
}
EXPORT_SYMBOL_GPL(tty_prepare_flip_string_flags);
@@ -446,20 +466,25 @@
static void flush_to_ldisc(struct work_struct *work)
{
- struct tty_struct *tty =
- container_of(work, struct tty_struct, buf.work);
+ struct tty_port *port = container_of(work, struct tty_port, buf.work);
+ struct tty_bufhead *buf = &port->buf;
+ struct tty_struct *tty;
unsigned long flags;
struct tty_ldisc *disc;
+ tty = port->itty;
+ if (WARN_RATELIMIT(tty == NULL, "tty is NULL"))
+ return;
+
disc = tty_ldisc_ref(tty);
if (disc == NULL) /* !TTY_LDISC */
return;
- spin_lock_irqsave(&tty->buf.lock, flags);
+ spin_lock_irqsave(&buf->lock, flags);
- if (!test_and_set_bit(TTY_FLUSHING, &tty->flags)) {
+ if (!test_and_set_bit(TTYP_FLUSHING, &port->iflags)) {
struct tty_buffer *head;
- while ((head = tty->buf.head) != NULL) {
+ while ((head = buf->head) != NULL) {
int count;
char *char_buf;
unsigned char *flag_buf;
@@ -468,14 +493,14 @@
if (!count) {
if (head->next == NULL)
break;
- tty->buf.head = head->next;
- tty_buffer_free(tty, head);
+ buf->head = head->next;
+ tty_buffer_free(port, head);
continue;
}
/* Ldisc or user is trying to flush the buffers
we are feeding to the ldisc, stop feeding the
line discipline as we want to empty the queue */
- if (test_bit(TTY_FLUSHPENDING, &tty->flags))
+ if (test_bit(TTYP_FLUSHPENDING, &port->iflags))
break;
if (!tty->receive_room)
break;
@@ -484,22 +509,22 @@
char_buf = head->char_buf_ptr + head->read;
flag_buf = head->flag_buf_ptr + head->read;
head->read += count;
- spin_unlock_irqrestore(&tty->buf.lock, flags);
+ spin_unlock_irqrestore(&buf->lock, flags);
disc->ops->receive_buf(tty, char_buf,
flag_buf, count);
- spin_lock_irqsave(&tty->buf.lock, flags);
+ spin_lock_irqsave(&buf->lock, flags);
}
- clear_bit(TTY_FLUSHING, &tty->flags);
+ clear_bit(TTYP_FLUSHING, &port->iflags);
}
/* We may have a deferred request to flush the input buffer,
if so pull the chain under the lock and empty the queue */
- if (test_bit(TTY_FLUSHPENDING, &tty->flags)) {
- __tty_buffer_flush(tty);
- clear_bit(TTY_FLUSHPENDING, &tty->flags);
+ if (test_bit(TTYP_FLUSHPENDING, &port->iflags)) {
+ __tty_buffer_flush(port);
+ clear_bit(TTYP_FLUSHPENDING, &port->iflags);
wake_up(&tty->read_wait);
}
- spin_unlock_irqrestore(&tty->buf.lock, flags);
+ spin_unlock_irqrestore(&buf->lock, flags);
tty_ldisc_deref(disc);
}
@@ -514,7 +539,8 @@
*/
void tty_flush_to_ldisc(struct tty_struct *tty)
{
- flush_work(&tty->buf.work);
+ if (!tty->low_latency)
+ flush_work(&tty->port->buf.work);
}
/**
@@ -532,16 +558,18 @@
void tty_flip_buffer_push(struct tty_struct *tty)
{
+ struct tty_bufhead *buf = &tty->port->buf;
unsigned long flags;
- spin_lock_irqsave(&tty->buf.lock, flags);
- if (tty->buf.tail != NULL)
- tty->buf.tail->commit = tty->buf.tail->used;
- spin_unlock_irqrestore(&tty->buf.lock, flags);
+
+ spin_lock_irqsave(&buf->lock, flags);
+ if (buf->tail != NULL)
+ buf->tail->commit = buf->tail->used;
+ spin_unlock_irqrestore(&buf->lock, flags);
if (tty->low_latency)
- flush_to_ldisc(&tty->buf.work);
+ flush_to_ldisc(&buf->work);
else
- schedule_work(&tty->buf.work);
+ schedule_work(&buf->work);
}
EXPORT_SYMBOL(tty_flip_buffer_push);
@@ -555,13 +583,15 @@
* Locking: none
*/
-void tty_buffer_init(struct tty_struct *tty)
+void tty_buffer_init(struct tty_port *port)
{
- spin_lock_init(&tty->buf.lock);
- tty->buf.head = NULL;
- tty->buf.tail = NULL;
- tty->buf.free = NULL;
- tty->buf.memory_used = 0;
- INIT_WORK(&tty->buf.work, flush_to_ldisc);
+ struct tty_bufhead *buf = &port->buf;
+
+ spin_lock_init(&buf->lock);
+ buf->head = NULL;
+ buf->tail = NULL;
+ buf->free = NULL;
+ buf->memory_used = 0;
+ INIT_WORK(&buf->work, flush_to_ldisc);
}
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index 2ea176b..a3eba7f 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -186,7 +186,6 @@
if (tty->dev)
put_device(tty->dev);
kfree(tty->write_buf);
- tty_buffer_free_all(tty);
tty->magic = 0xDEADDEAD;
kfree(tty);
}
@@ -1417,6 +1416,8 @@
"%s: %s driver does not set tty->port. This will crash the kernel later. Fix the driver!\n",
__func__, tty->driver->name);
+ tty->port->itty = tty;
+
/*
* Structures all installed ... call the ldisc open routines.
* If we fail here just call release_tty to clean up. No need
@@ -1552,6 +1553,7 @@
tty->ops->shutdown(tty);
tty_free_termios(tty);
tty_driver_remove_tty(tty->driver, tty);
+ tty->port->itty = NULL;
if (tty->link)
tty_kref_put(tty->link);
@@ -1625,7 +1627,6 @@
struct tty_struct *tty = file_tty(filp);
struct tty_struct *o_tty;
int pty_master, tty_closing, o_tty_closing, do_sleep;
- int devpts;
int idx;
char buf[64];
@@ -1640,7 +1641,6 @@
idx = tty->index;
pty_master = (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
tty->driver->subtype == PTY_TYPE_MASTER);
- devpts = (tty->driver->flags & TTY_DRIVER_DEVPTS_MEM) != 0;
/* Review: parallel close */
o_tty = tty->link;
@@ -1799,9 +1799,6 @@
release_tty(tty, idx);
mutex_unlock(&tty_mutex);
- /* Make this pty number available for reallocation */
- if (devpts)
- devpts_kill_index(inode, idx);
return 0;
}
@@ -2937,19 +2934,13 @@
tty_ldisc_init(tty);
tty->session = NULL;
tty->pgrp = NULL;
- tty->overrun_time = jiffies;
- tty_buffer_init(tty);
mutex_init(&tty->legacy_mutex);
mutex_init(&tty->termios_mutex);
mutex_init(&tty->ldisc_mutex);
init_waitqueue_head(&tty->write_wait);
init_waitqueue_head(&tty->read_wait);
INIT_WORK(&tty->hangup_work, do_tty_hangup);
- mutex_init(&tty->atomic_read_lock);
mutex_init(&tty->atomic_write_lock);
- mutex_init(&tty->output_lock);
- mutex_init(&tty->echo_lock);
- spin_lock_init(&tty->read_lock);
spin_lock_init(&tty->ctrl_lock);
INIT_LIST_HEAD(&tty->tty_files);
INIT_WORK(&tty->SAK_work, do_SAK_work);
diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c
index 0f2a2c5..f4e6754 100644
--- a/drivers/tty/tty_ldisc.c
+++ b/drivers/tty/tty_ldisc.c
@@ -512,7 +512,7 @@
static int tty_ldisc_halt(struct tty_struct *tty)
{
clear_bit(TTY_LDISC, &tty->flags);
- return cancel_work_sync(&tty->buf.work);
+ return cancel_work_sync(&tty->port->buf.work);
}
/**
@@ -525,7 +525,7 @@
{
flush_work(&tty->hangup_work);
flush_work(&tty->SAK_work);
- flush_work(&tty->buf.work);
+ flush_work(&tty->port->buf.work);
}
/**
@@ -704,9 +704,9 @@
/* Restart the work queue in case no characters kick it off. Safe if
already running */
if (work)
- schedule_work(&tty->buf.work);
+ schedule_work(&tty->port->buf.work);
if (o_work)
- schedule_work(&o_tty->buf.work);
+ schedule_work(&o_tty->port->buf.work);
mutex_unlock(&tty->ldisc_mutex);
tty_unlock(tty);
return retval;
@@ -817,7 +817,7 @@
*/
clear_bit(TTY_LDISC, &tty->flags);
tty_unlock(tty);
- cancel_work_sync(&tty->buf.work);
+ cancel_work_sync(&tty->port->buf.work);
mutex_unlock(&tty->ldisc_mutex);
retry:
tty_lock(tty);
@@ -897,6 +897,11 @@
static void tty_ldisc_kill(struct tty_struct *tty)
{
+ /* There cannot be users from userspace now. But there still might be
+ * drivers holding a reference via tty_ldisc_ref. Do not steal them the
+ * ldisc until they are done. */
+ tty_ldisc_wait_idle(tty, MAX_SCHEDULE_TIMEOUT);
+
mutex_lock(&tty->ldisc_mutex);
/*
* Now kill off the ldisc
diff --git a/drivers/tty/tty_port.c b/drivers/tty/tty_port.c
index d7bdd8d..416b42f 100644
--- a/drivers/tty/tty_port.c
+++ b/drivers/tty/tty_port.c
@@ -21,6 +21,7 @@
void tty_port_init(struct tty_port *port)
{
memset(port, 0, sizeof(*port));
+ tty_buffer_init(port);
init_waitqueue_head(&port->open_wait);
init_waitqueue_head(&port->close_wait);
init_waitqueue_head(&port->delta_msr_wait);
@@ -126,6 +127,7 @@
struct tty_port *port = container_of(kref, struct tty_port, kref);
if (port->xmit_buf)
free_page((unsigned long)port->xmit_buf);
+ tty_buffer_free_all(port);
if (port->ops->destruct)
port->ops->destruct(port);
else
diff --git a/drivers/tty/vt/selection.c b/drivers/tty/vt/selection.c
index 8e9b4be..60b7b69 100644
--- a/drivers/tty/vt/selection.c
+++ b/drivers/tty/vt/selection.c
@@ -341,15 +341,11 @@
struct tty_ldisc *ld;
DECLARE_WAITQUEUE(wait, current);
-
console_lock();
poke_blanked_console();
console_unlock();
- /* FIXME: wtf is this supposed to achieve ? */
- ld = tty_ldisc_ref(tty);
- if (!ld)
- ld = tty_ldisc_ref_wait(tty);
+ ld = tty_ldisc_ref_wait(tty);
/* FIXME: this is completely unsafe */
add_wait_queue(&vc->paste_wait, &wait);
@@ -361,8 +357,7 @@
}
count = sel_buffer_lth - pasted;
count = min(count, tty->receive_room);
- tty->ldisc->ops->receive_buf(tty, sel_buffer + pasted,
- NULL, count);
+ ld->ops->receive_buf(tty, sel_buffer + pasted, NULL, count);
pasted += count;
}
remove_wait_queue(&vc->paste_wait, &wait);
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 1e741bc..f034716 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -2151,8 +2151,15 @@
irqreturn_t usb_hcd_irq (int irq, void *__hcd)
{
struct usb_hcd *hcd = __hcd;
+ unsigned long flags;
irqreturn_t rc;
+ /* IRQF_DISABLED doesn't work correctly with shared IRQs
+ * when the first handler doesn't use it. So let's just
+ * assume it's never used.
+ */
+ local_irq_save(flags);
+
if (unlikely(HCD_DEAD(hcd) || !HCD_HW_ACCESSIBLE(hcd)))
rc = IRQ_NONE;
else if (hcd->driver->irq(hcd) == IRQ_NONE)
@@ -2160,6 +2167,7 @@
else
rc = IRQ_HANDLED;
+ local_irq_restore(flags);
return rc;
}
EXPORT_SYMBOL_GPL(usb_hcd_irq);
@@ -2347,6 +2355,14 @@
int retval;
if (hcd->driver->irq) {
+
+ /* IRQF_DISABLED doesn't work as advertised when used together
+ * with IRQF_SHARED. As usb_hcd_irq() will always disable
+ * interrupts we can remove it here.
+ */
+ if (irqflags & IRQF_SHARED)
+ irqflags &= ~IRQF_DISABLED;
+
snprintf(hcd->irq_descr, sizeof(hcd->irq_descr), "%s:usb%d",
hcd->driver->description, hcd->self.busnum);
retval = request_irq(irqnum, &usb_hcd_irq, irqflags,
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 64854d7..1af04bd 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -739,13 +739,16 @@
int limit = 100;
spin_lock_irqsave (&hub->tt.lock, flags);
- while (--limit && !list_empty (&hub->tt.clear_list)) {
+ while (!list_empty(&hub->tt.clear_list)) {
struct list_head *next;
struct usb_tt_clear *clear;
struct usb_device *hdev = hub->hdev;
const struct hc_driver *drv;
int status;
+ if (!hub->quiescing && --limit < 0)
+ break;
+
next = hub->tt.clear_list.next;
clear = list_entry (next, struct usb_tt_clear, clear_list);
list_del (&clear->clear_list);
@@ -1210,7 +1213,7 @@
if (hub->has_indicators)
cancel_delayed_work_sync(&hub->leds);
if (hub->tt.hub)
- cancel_work_sync(&hub->tt.clear_work);
+ flush_work(&hub->tt.clear_work);
}
/* caller has locked the hub device */
diff --git a/drivers/usb/early/ehci-dbgp.c b/drivers/usb/early/ehci-dbgp.c
index e426ad6..4bfa78a 100644
--- a/drivers/usb/early/ehci-dbgp.c
+++ b/drivers/usb/early/ehci-dbgp.c
@@ -20,6 +20,7 @@
#include <linux/usb/ehci_def.h>
#include <linux/delay.h>
#include <linux/serial_core.h>
+#include <linux/kconfig.h>
#include <linux/kgdb.h>
#include <linux/kthread.h>
#include <asm/io.h>
@@ -614,12 +615,6 @@
return -ENODEV;
}
-int dbgp_external_startup(struct usb_hcd *hcd)
-{
- return xen_dbgp_external_startup(hcd) ?: _dbgp_external_startup();
-}
-EXPORT_SYMBOL_GPL(dbgp_external_startup);
-
static int ehci_reset_port(int port)
{
u32 portsc;
@@ -979,6 +974,7 @@
.index = -1,
};
+#if IS_ENABLED(CONFIG_USB_EHCI_HCD)
int dbgp_reset_prep(struct usb_hcd *hcd)
{
int ret = xen_dbgp_reset_prep(hcd);
@@ -1007,6 +1003,13 @@
}
EXPORT_SYMBOL_GPL(dbgp_reset_prep);
+int dbgp_external_startup(struct usb_hcd *hcd)
+{
+ return xen_dbgp_external_startup(hcd) ?: _dbgp_external_startup();
+}
+EXPORT_SYMBOL_GPL(dbgp_external_startup);
+#endif /* USB_EHCI_HCD */
+
#ifdef CONFIG_KGDB
static char kgdbdbgp_buf[DBGP_MAX_PACKET];
diff --git a/drivers/usb/gadget/net2272.c b/drivers/usb/gadget/net2272.c
index 43ac748..c009263 100644
--- a/drivers/usb/gadget/net2272.c
+++ b/drivers/usb/gadget/net2272.c
@@ -2069,8 +2069,10 @@
#if defined(PLX_PCI_RDK2)
/* see if PCI int for us by checking irqstat */
intcsr = readl(dev->rdk2.fpga_base_addr + RDK2_IRQSTAT);
- if (!intcsr & (1 << NET2272_PCI_IRQ))
+ if (!intcsr & (1 << NET2272_PCI_IRQ)) {
+ spin_unlock(&dev->lock);
return IRQ_NONE;
+ }
/* check dma interrupts */
#endif
/* Platform/devcice interrupt handler */
diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c
index 2a4749c..23afa06 100644
--- a/drivers/usb/gadget/omap_udc.c
+++ b/drivers/usb/gadget/omap_udc.c
@@ -44,7 +44,7 @@
#include <asm/unaligned.h>
#include <asm/mach-types.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
#include <mach/usb.h>
@@ -61,6 +61,8 @@
#define DRIVER_DESC "OMAP UDC driver"
#define DRIVER_VERSION "4 October 2004"
+#define OMAP_DMA_USB_W2FC_TX0 29
+
/*
* The OMAP UDC needs _very_ early endpoint setup: before enabling the
* D+ pullup to allow enumeration. That's too early for the gadget
diff --git a/drivers/usb/gadget/u_ether.c b/drivers/usb/gadget/u_ether.c
index 6458764..4ec3c0d 100644
--- a/drivers/usb/gadget/u_ether.c
+++ b/drivers/usb/gadget/u_ether.c
@@ -20,6 +20,7 @@
#include <linux/ctype.h>
#include <linux/etherdevice.h>
#include <linux/ethtool.h>
+#include <linux/if_vlan.h>
#include "u_ether.h"
@@ -295,7 +296,7 @@
while (skb2) {
if (status < 0
|| ETH_HLEN > skb2->len
- || skb2->len > ETH_FRAME_LEN) {
+ || skb2->len > VLAN_ETH_FRAME_LEN) {
dev->net->stats.rx_errors++;
dev->net->stats.rx_length_errors++;
DBG(dev, "rx length %d\n", skb2->len);
diff --git a/drivers/usb/host/ehci-ls1x.c b/drivers/usb/host/ehci-ls1x.c
index ca75965..aa0f328 100644
--- a/drivers/usb/host/ehci-ls1x.c
+++ b/drivers/usb/host/ehci-ls1x.c
@@ -113,7 +113,7 @@
goto err_put_hcd;
}
- ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
+ ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
if (ret)
goto err_put_hcd;
diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c
index 4a08fc0..8e58a5f 100644
--- a/drivers/usb/host/ehci-mxc.c
+++ b/drivers/usb/host/ehci-mxc.c
@@ -24,7 +24,6 @@
#include <linux/usb/ulpi.h>
#include <linux/slab.h>
-#include <mach/hardware.h>
#include <linux/platform_data/usb-ehci-mxc.h>
#include <asm/mach-types.h>
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
index d7fe287..0d5ac36 100644
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c
@@ -39,12 +39,13 @@
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/usb/ulpi.h>
-#include <plat/usb.h>
#include <linux/regulator/consumer.h>
#include <linux/pm_runtime.h>
#include <linux/gpio.h>
#include <linux/clk.h>
+#include <linux/platform_data/usb-omap.h>
+
/* EHCI Register Set */
#define EHCI_INSNREG04 (0xA0)
#define EHCI_INSNREG04_DISABLE_UNSUSPEND (1 << 5)
diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c
index 6223d175..2de0890 100644
--- a/drivers/usb/host/ehci-tegra.c
+++ b/drivers/usb/host/ehci-tegra.c
@@ -28,7 +28,10 @@
#include <linux/pm_runtime.h>
#include <linux/usb/tegra_usb_phy.h>
-#include <mach/iomap.h>
+
+#define TEGRA_USB_BASE 0xC5000000
+#define TEGRA_USB2_BASE 0xC5004000
+#define TEGRA_USB3_BASE 0xC5008000
#define TEGRA_USB_DMA_ALIGN 32
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index 4531d03..439e6e4 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -25,7 +25,6 @@
#include <asm/mach-types.h>
#include <mach/mux.h>
-#include <plat/fpga.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
@@ -93,14 +92,14 @@
{
if (on) {
if (machine_is_omap_innovator() && cpu_is_omap1510())
- fpga_write(fpga_read(INNOVATOR_FPGA_CAM_USB_CONTROL)
+ __raw_writeb(__raw_readb(INNOVATOR_FPGA_CAM_USB_CONTROL)
| ((1 << 5/*usb1*/) | (1 << 3/*usb2*/)),
INNOVATOR_FPGA_CAM_USB_CONTROL);
else if (machine_is_omap_osk())
tps65010_set_gpio_out_value(GPIO1, LOW);
} else {
if (machine_is_omap_innovator() && cpu_is_omap1510())
- fpga_write(fpga_read(INNOVATOR_FPGA_CAM_USB_CONTROL)
+ __raw_writeb(__raw_readb(INNOVATOR_FPGA_CAM_USB_CONTROL)
& ~((1 << 5/*usb1*/) | (1 << 3/*usb2*/)),
INNOVATOR_FPGA_CAM_USB_CONTROL);
else if (machine_is_omap_osk())
diff --git a/drivers/usb/host/ohci-omap3.c b/drivers/usb/host/ohci-omap3.c
index 1b8133b..bd7803d 100644
--- a/drivers/usb/host/ohci-omap3.c
+++ b/drivers/usb/host/ohci-omap3.c
@@ -30,7 +30,6 @@
*/
#include <linux/platform_device.h>
-#include <plat/usb.h>
#include <linux/pm_runtime.h>
/*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/host/ohci-xls.c b/drivers/usb/host/ohci-xls.c
index 84201cd..41e378f 100644
--- a/drivers/usb/host/ohci-xls.c
+++ b/drivers/usb/host/ohci-xls.c
@@ -56,7 +56,7 @@
goto err3;
}
- retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
+ retval = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
if (retval != 0)
goto err4;
return retval;
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index 966d148..39f9e4a 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -545,7 +545,14 @@
/* Pegatron Lucid (Ordissimo AIRIS) */
.matches = {
DMI_MATCH(DMI_BOARD_NAME, "M11JB"),
- DMI_MATCH(DMI_BIOS_VERSION, "Lucid-GE-133"),
+ DMI_MATCH(DMI_BIOS_VERSION, "Lucid-"),
+ },
+ },
+ {
+ /* Pegatron Lucid (Ordissimo) */
+ .matches = {
+ DMI_MATCH(DMI_BOARD_NAME, "Ordissimo"),
+ DMI_MATCH(DMI_BIOS_VERSION, "Lucid-"),
},
},
{ }
diff --git a/drivers/usb/host/xhci-dbg.c b/drivers/usb/host/xhci-dbg.c
index 4b436f5..5f3a7c7 100644
--- a/drivers/usb/host/xhci-dbg.c
+++ b/drivers/usb/host/xhci-dbg.c
@@ -544,7 +544,6 @@
int i;
/* Fields are 32 bits wide, DMA addresses are in bytes */
int field_size = 32 / 8;
- struct xhci_slot_ctx *slot_ctx;
dma_addr_t dma = ctx->dma;
int csz = HCC_64BYTE_CONTEXT(xhci->hcc_params);
@@ -570,7 +569,6 @@
dbg_rsvd64(xhci, (u64 *)ctrl_ctx, dma);
}
- slot_ctx = xhci_get_slot_ctx(xhci, ctx);
xhci_dbg_slot_ctx(xhci, ctx);
xhci_dbg_ep_ctx(xhci, ctx, last_ep);
}
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index aa90ad4..a686cf4 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -151,9 +151,8 @@
if (portsc & PORT_DEV_REMOVE)
port_removable |= 1 << (i + 1);
}
- memset(&desc->u.ss.DeviceRemovable,
- (__force __u16) cpu_to_le16(port_removable),
- sizeof(__u16));
+
+ desc->u.ss.DeviceRemovable = cpu_to_le16(port_removable);
}
static void xhci_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci,
@@ -809,11 +808,13 @@
temp = xhci_readl(xhci, port_array[wIndex]);
xhci_dbg(xhci, "set port power, actual port %d status = 0x%x\n", wIndex, temp);
+ spin_unlock_irqrestore(&xhci->lock, flags);
temp = usb_acpi_power_manageable(hcd->self.root_hub,
wIndex);
if (temp)
usb_acpi_set_power_state(hcd->self.root_hub,
wIndex, true);
+ spin_lock_irqsave(&xhci->lock, flags);
break;
case USB_PORT_FEAT_RESET:
temp = (temp | PORT_RESET);
@@ -917,11 +918,13 @@
xhci_writel(xhci, temp & ~PORT_POWER,
port_array[wIndex]);
+ spin_unlock_irqrestore(&xhci->lock, flags);
temp = usb_acpi_power_manageable(hcd->self.root_hub,
wIndex);
if (temp)
usb_acpi_set_power_state(hcd->self.root_hub,
wIndex, false);
+ spin_lock_irqsave(&xhci->lock, flags);
break;
default:
goto error;
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index c6ebb17..4e1a894 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1228,6 +1228,17 @@
cur_seg = find_trb_seg(xhci->cmd_ring->first_seg,
xhci->cmd_ring->dequeue, &cycle_state);
+ if (!cur_seg) {
+ xhci_warn(xhci, "Command ring mismatch, dequeue = %p %llx (dma)\n",
+ xhci->cmd_ring->dequeue,
+ (unsigned long long)
+ xhci_trb_virt_to_dma(xhci->cmd_ring->deq_seg,
+ xhci->cmd_ring->dequeue));
+ xhci_debug_ring(xhci, xhci->cmd_ring);
+ xhci_dbg_ring_ptrs(xhci, xhci->cmd_ring);
+ return;
+ }
+
/* find the command trb matched by cd from command ring */
for (cmd_trb = xhci->cmd_ring->dequeue;
cmd_trb != xhci->cmd_ring->enqueue;
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 7d462bf..c9e419f 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -1627,7 +1627,6 @@
struct xhci_hcd *xhci;
struct xhci_container_ctx *in_ctx, *out_ctx;
unsigned int ep_index;
- struct xhci_ep_ctx *ep_ctx;
struct xhci_slot_ctx *slot_ctx;
struct xhci_input_control_ctx *ctrl_ctx;
u32 added_ctxs;
@@ -1663,7 +1662,6 @@
out_ctx = virt_dev->out_ctx;
ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx);
ep_index = xhci_get_endpoint_index(&ep->desc);
- ep_ctx = xhci_get_ep_ctx(xhci, out_ctx, ep_index);
/* If this endpoint is already in use, and the upper layers are trying
* to add it again without dropping it, reject the addition.
@@ -1817,6 +1815,8 @@
case COMP_EBADSLT:
dev_warn(&udev->dev, "WARN: slot not enabled for"
"evaluate context command.\n");
+ ret = -EINVAL;
+ break;
case COMP_CTX_STATE:
dev_warn(&udev->dev, "WARN: invalid context state for "
"evaluate context command.\n");
@@ -4021,7 +4021,7 @@
static unsigned long long xhci_service_interval_to_ns(
struct usb_endpoint_descriptor *desc)
{
- return (1 << (desc->bInterval - 1)) * 125 * 1000;
+ return (1ULL << (desc->bInterval - 1)) * 125 * 1000;
}
static u16 xhci_get_timeout_no_hub_lpm(struct usb_device *udev,
@@ -4142,7 +4142,7 @@
(xhci_service_interval_to_ns(desc) > timeout_ns))
timeout_ns = xhci_service_interval_to_ns(desc);
- u2_del_ns = udev->bos->ss_cap->bU2DevExitLat * 1000;
+ u2_del_ns = le16_to_cpu(udev->bos->ss_cap->bU2DevExitLat) * 1000ULL;
if (u2_del_ns > timeout_ns)
timeout_ns = u2_del_ns;
diff --git a/drivers/usb/misc/ezusb.c b/drivers/usb/misc/ezusb.c
index 4223d76..6589268 100644
--- a/drivers/usb/misc/ezusb.c
+++ b/drivers/usb/misc/ezusb.c
@@ -158,3 +158,4 @@
}
EXPORT_SYMBOL_GPL(ezusb_fx2_ihex_firmware_download);
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/musb/am35x.c b/drivers/usb/musb/am35x.c
index c964d6a..a87cdd2 100644
--- a/drivers/usb/musb/am35x.c
+++ b/drivers/usb/musb/am35x.c
@@ -34,8 +34,7 @@
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/usb/nop-usb-xceiv.h>
-
-#include <plat/usb.h>
+#include <linux/platform_data/usb-omap.h>
#include "musb_core.h"
diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
index 444346e1..aa34f22 100644
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -38,13 +38,12 @@
#include <linux/pm_runtime.h>
#include <linux/module.h>
#include <linux/usb/nop-usb-xceiv.h>
+#include <linux/platform_data/usb-omap.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/of_address.h>
-#include <plat/usb.h>
-
#include "musb_core.h"
#ifdef CONFIG_OF
@@ -458,11 +457,11 @@
struct platform_device *musb;
struct resource *res;
struct resource resources[2];
- char res_name[10];
+ char res_name[11];
int ret, musbid;
/* get memory resource */
- sprintf(res_name, "musb%d", id);
+ snprintf(res_name, sizeof(res_name), "musb%d", id);
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, res_name);
if (!res) {
dev_err(dev, "%s get mem resource failed\n", res_name);
@@ -473,7 +472,7 @@
resources[0] = *res;
/* get irq resource */
- sprintf(res_name, "musb%d-irq", id);
+ snprintf(res_name, sizeof(res_name), "musb%d-irq", id);
res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, res_name);
if (!res) {
dev_err(dev, "%s get irq resource failed\n", res_name);
@@ -530,7 +529,7 @@
of_property_read_u32(np, "num-eps", (u32 *)&config->num_eps);
of_property_read_u32(np, "ram-bits", (u32 *)&config->ram_bits);
- sprintf(res_name, "port%d-mode", id);
+ snprintf(res_name, sizeof(res_name), "port%d-mode", id);
of_property_read_u32(np, res_name, (u32 *)&pdata->mode);
of_property_read_u32(np, "power", (u32 *)&pdata->power);
config->multipoint = of_property_read_bool(np, "multipoint");
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index d0b87e7..b6b84da 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -707,11 +707,12 @@
fifo_count = musb_readw(epio, MUSB_RXCOUNT);
/*
- * use mode 1 only if we expect data of at least ep packet_sz
- * and have not yet received a short packet
+ * Enable Mode 1 on RX transfers only when short_not_ok flag
+ * is set. Currently short_not_ok flag is set only from
+ * file_storage and f_mass_storage drivers
*/
- if ((request->length - request->actual >= musb_ep->packet_sz) &&
- (fifo_count >= musb_ep->packet_sz))
+
+ if (request->short_not_ok && fifo_count == musb_ep->packet_sz)
use_mode_1 = 1;
else
use_mode_1 = 0;
@@ -727,6 +728,27 @@
c = musb->dma_controller;
channel = musb_ep->dma;
+ /* We use DMA Req mode 0 in rx_csr, and DMA controller operates in
+ * mode 0 only. So we do not get endpoint interrupts due to DMA
+ * completion. We only get interrupts from DMA controller.
+ *
+ * We could operate in DMA mode 1 if we knew the size of the tranfer
+ * in advance. For mass storage class, request->length = what the host
+ * sends, so that'd work. But for pretty much everything else,
+ * request->length is routinely more than what the host sends. For
+ * most these gadgets, end of is signified either by a short packet,
+ * or filling the last byte of the buffer. (Sending extra data in
+ * that last pckate should trigger an overflow fault.) But in mode 1,
+ * we don't get DMA completion interrupt for short packets.
+ *
+ * Theoretically, we could enable DMAReq irq (MUSB_RXCSR_DMAMODE = 1),
+ * to get endpoint interrupt on every DMA req, but that didn't seem
+ * to work reliably.
+ *
+ * REVISIT an updated g_file_storage can set req->short_not_ok, which
+ * then becomes usable as a runtime "use mode 1" hint...
+ */
+
/* Experimental: Mode1 works with mass storage use cases */
if (use_mode_1) {
csr |= MUSB_RXCSR_AUTOCLEAR;
diff --git a/drivers/usb/musb/omap2430.h b/drivers/usb/musb/omap2430.h
index b85f397..8ef6566 100644
--- a/drivers/usb/musb/omap2430.h
+++ b/drivers/usb/musb/omap2430.h
@@ -10,7 +10,7 @@
#ifndef __MUSB_OMAP243X_H__
#define __MUSB_OMAP243X_H__
-#include <plat/usb.h>
+#include <linux/platform_data/usb-omap.h>
/*
* OMAP2430-specific definitions
diff --git a/drivers/usb/musb/tusb6010_omap.c b/drivers/usb/musb/tusb6010_omap.c
index 7a62b95..bfca114 100644
--- a/drivers/usb/musb/tusb6010_omap.c
+++ b/drivers/usb/musb/tusb6010_omap.c
@@ -16,7 +16,7 @@
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/slab.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
#include "musb_core.h"
#include "tusb6010.h"
@@ -25,6 +25,13 @@
#define MAX_DMAREQ 5 /* REVISIT: Really 6, but req5 not OK */
+#define OMAP24XX_DMA_EXT_DMAREQ0 2
+#define OMAP24XX_DMA_EXT_DMAREQ1 3
+#define OMAP242X_DMA_EXT_DMAREQ2 14
+#define OMAP242X_DMA_EXT_DMAREQ3 15
+#define OMAP242X_DMA_EXT_DMAREQ4 16
+#define OMAP242X_DMA_EXT_DMAREQ5 64
+
struct tusb_omap_dma_ch {
struct musb *musb;
void __iomem *tbase;
diff --git a/drivers/usb/musb/ux500.c b/drivers/usb/musb/ux500.c
index d62a91f..0e62f50 100644
--- a/drivers/usb/musb/ux500.c
+++ b/drivers/usb/musb/ux500.c
@@ -65,7 +65,7 @@
struct platform_device *musb;
struct ux500_glue *glue;
struct clk *clk;
-
+ int musbid;
int ret = -ENOMEM;
glue = kzalloc(sizeof(*glue), GFP_KERNEL);
diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig
index d8c8a42..6223062 100644
--- a/drivers/usb/otg/Kconfig
+++ b/drivers/usb/otg/Kconfig
@@ -58,7 +58,7 @@
config TWL4030_USB
tristate "TWL4030 USB Transceiver Driver"
- depends on TWL4030_CORE && REGULATOR_TWL4030
+ depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS
select USB_OTG_UTILS
help
Enable this to support the USB OTG transceiver on TWL4030
@@ -68,7 +68,7 @@
config TWL6030_USB
tristate "TWL6030 USB Transceiver Driver"
- depends on TWL4030_CORE && OMAP_USB2
+ depends on TWL4030_CORE && OMAP_USB2 && USB_MUSB_OMAP2PLUS
select USB_OTG_UTILS
help
Enable this to support the USB OTG transceiver on TWL6030
diff --git a/drivers/usb/phy/tegra_usb_phy.c b/drivers/usb/phy/tegra_usb_phy.c
index 987116f9..9d13c81 100644
--- a/drivers/usb/phy/tegra_usb_phy.c
+++ b/drivers/usb/phy/tegra_usb_phy.c
@@ -29,7 +29,9 @@
#include <linux/usb/ulpi.h>
#include <asm/mach-types.h>
#include <linux/usb/tegra_usb_phy.h>
-#include <mach/iomap.h>
+
+#define TEGRA_USB_BASE 0xC5000000
+#define TEGRA_USB_SIZE SZ_16K
#define ULPI_VIEWPORT 0x170
diff --git a/drivers/usb/renesas_usbhs/fifo.c b/drivers/usb/renesas_usbhs/fifo.c
index 143c4e9..c021b20 100644
--- a/drivers/usb/renesas_usbhs/fifo.c
+++ b/drivers/usb/renesas_usbhs/fifo.c
@@ -795,6 +795,7 @@
dev_dbg(dev, " %s %d (%d/ %d)\n",
fifo->name, usbhs_pipe_number(pipe), pkt->length, pkt->zero);
+ usbhs_pipe_enable(pipe);
usbhsf_dma_start(pipe, fifo);
dma_async_issue_pending(chan);
}
diff --git a/drivers/usb/renesas_usbhs/mod_host.c b/drivers/usb/renesas_usbhs/mod_host.c
index 9b69a13..069cd76 100644
--- a/drivers/usb/renesas_usbhs/mod_host.c
+++ b/drivers/usb/renesas_usbhs/mod_host.c
@@ -334,6 +334,11 @@
struct device *dev = usbhs_priv_to_dev(priv);
unsigned long flags;
+ if (unlikely(!uep)) {
+ dev_err(dev, "no uep\n");
+ return;
+ }
+
/******************** spin lock ********************/
usbhs_lock(priv, flags);
diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
index e9c7046..d255f66 100644
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -242,13 +242,11 @@
return r;
}
-/* allocate private data */
-static int ch341_attach(struct usb_serial *serial)
+static int ch341_port_probe(struct usb_serial_port *port)
{
struct ch341_private *priv;
int r;
- /* private data */
priv = kzalloc(sizeof(struct ch341_private), GFP_KERNEL);
if (!priv)
return -ENOMEM;
@@ -258,17 +256,27 @@
priv->baud_rate = DEFAULT_BAUD_RATE;
priv->line_control = CH341_BIT_RTS | CH341_BIT_DTR;
- r = ch341_configure(serial->dev, priv);
+ r = ch341_configure(port->serial->dev, priv);
if (r < 0)
goto error;
- usb_set_serial_port_data(serial->port[0], priv);
+ usb_set_serial_port_data(port, priv);
return 0;
error: kfree(priv);
return r;
}
+static int ch341_port_remove(struct usb_serial_port *port)
+{
+ struct ch341_private *priv;
+
+ priv = usb_get_serial_port_data(port);
+ kfree(priv);
+
+ return 0;
+}
+
static int ch341_carrier_raised(struct usb_serial_port *port)
{
struct ch341_private *priv = usb_get_serial_port_data(port);
@@ -304,7 +312,7 @@
static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port)
{
struct usb_serial *serial = port->serial;
- struct ch341_private *priv = usb_get_serial_port_data(serial->port[0]);
+ struct ch341_private *priv = usb_get_serial_port_data(port);
int r;
priv->baud_rate = DEFAULT_BAUD_RATE;
@@ -608,7 +616,8 @@
.tiocmget = ch341_tiocmget,
.tiocmset = ch341_tiocmset,
.read_int_callback = ch341_read_int_callback,
- .attach = ch341_attach,
+ .port_probe = ch341_port_probe,
+ .port_remove = ch341_port_remove,
.reset_resume = ch341_reset_resume,
};
diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index c86f68c..b50fa1c 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -244,6 +244,8 @@
static int digi_startup(struct usb_serial *serial);
static void digi_disconnect(struct usb_serial *serial);
static void digi_release(struct usb_serial *serial);
+static int digi_port_probe(struct usb_serial_port *port);
+static int digi_port_remove(struct usb_serial_port *port);
static void digi_read_bulk_callback(struct urb *urb);
static int digi_read_inb_callback(struct urb *urb);
static int digi_read_oob_callback(struct urb *urb);
@@ -294,6 +296,8 @@
.attach = digi_startup,
.disconnect = digi_disconnect,
.release = digi_release,
+ .port_probe = digi_port_probe,
+ .port_remove = digi_port_remove,
};
static struct usb_serial_driver digi_acceleport_4_device = {
@@ -320,6 +324,8 @@
.attach = digi_startup,
.disconnect = digi_disconnect,
.release = digi_release,
+ .port_probe = digi_port_probe,
+ .port_remove = digi_port_remove,
};
static struct usb_serial_driver * const serial_drivers[] = {
@@ -1240,59 +1246,50 @@
return ret;
}
+static int digi_port_init(struct usb_serial_port *port, unsigned port_num)
+{
+ struct digi_port *priv;
+
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ spin_lock_init(&priv->dp_port_lock);
+ priv->dp_port_num = port_num;
+ init_waitqueue_head(&priv->dp_modem_change_wait);
+ init_waitqueue_head(&priv->dp_transmit_idle_wait);
+ init_waitqueue_head(&priv->dp_flush_wait);
+ init_waitqueue_head(&priv->dp_close_wait);
+ INIT_WORK(&priv->dp_wakeup_work, digi_wakeup_write_lock);
+ priv->dp_port = port;
+
+ init_waitqueue_head(&port->write_wait);
+
+ usb_set_serial_port_data(port, priv);
+
+ return 0;
+}
static int digi_startup(struct usb_serial *serial)
{
-
- int i;
- struct digi_port *priv;
struct digi_serial *serial_priv;
+ int ret;
- /* allocate the private data structures for all ports */
- /* number of regular ports + 1 for the out-of-band port */
- for (i = 0; i < serial->type->num_ports + 1; i++) {
- /* allocate port private structure */
- priv = kmalloc(sizeof(struct digi_port), GFP_KERNEL);
- if (priv == NULL) {
- while (--i >= 0)
- kfree(usb_get_serial_port_data(serial->port[i]));
- return 1; /* error */
- }
+ serial_priv = kzalloc(sizeof(*serial_priv), GFP_KERNEL);
+ if (!serial_priv)
+ return -ENOMEM;
- /* initialize port private structure */
- spin_lock_init(&priv->dp_port_lock);
- priv->dp_port_num = i;
- priv->dp_out_buf_len = 0;
- priv->dp_write_urb_in_use = 0;
- priv->dp_modem_signals = 0;
- init_waitqueue_head(&priv->dp_modem_change_wait);
- priv->dp_transmit_idle = 0;
- init_waitqueue_head(&priv->dp_transmit_idle_wait);
- priv->dp_throttled = 0;
- priv->dp_throttle_restart = 0;
- init_waitqueue_head(&priv->dp_flush_wait);
- init_waitqueue_head(&priv->dp_close_wait);
- INIT_WORK(&priv->dp_wakeup_work, digi_wakeup_write_lock);
- priv->dp_port = serial->port[i];
- /* initialize write wait queue for this port */
- init_waitqueue_head(&serial->port[i]->write_wait);
-
- usb_set_serial_port_data(serial->port[i], priv);
- }
-
- /* allocate serial private structure */
- serial_priv = kmalloc(sizeof(struct digi_serial), GFP_KERNEL);
- if (serial_priv == NULL) {
- for (i = 0; i < serial->type->num_ports + 1; i++)
- kfree(usb_get_serial_port_data(serial->port[i]));
- return 1; /* error */
- }
-
- /* initialize serial private structure */
spin_lock_init(&serial_priv->ds_serial_lock);
serial_priv->ds_oob_port_num = serial->type->num_ports;
serial_priv->ds_oob_port = serial->port[serial_priv->ds_oob_port_num];
- serial_priv->ds_device_started = 0;
+
+ ret = digi_port_init(serial_priv->ds_oob_port,
+ serial_priv->ds_oob_port_num);
+ if (ret) {
+ kfree(serial_priv);
+ return ret;
+ }
+
usb_set_serial_data(serial, serial_priv);
return 0;
@@ -1313,15 +1310,35 @@
static void digi_release(struct usb_serial *serial)
{
- int i;
+ struct digi_serial *serial_priv;
+ struct digi_port *priv;
- /* free the private data structures for all ports */
- /* number of regular ports + 1 for the out-of-band port */
- for (i = 0; i < serial->type->num_ports + 1; i++)
- kfree(usb_get_serial_port_data(serial->port[i]));
- kfree(usb_get_serial_data(serial));
+ serial_priv = usb_get_serial_data(serial);
+
+ priv = usb_get_serial_port_data(serial_priv->ds_oob_port);
+ kfree(priv);
+
+ kfree(serial_priv);
}
+static int digi_port_probe(struct usb_serial_port *port)
+{
+ unsigned port_num;
+
+ port_num = port->number - port->serial->minor;
+
+ return digi_port_init(port, port_num);
+}
+
+static int digi_port_remove(struct usb_serial_port *port)
+{
+ struct digi_port *priv;
+
+ priv = usb_get_serial_port_data(port);
+ kfree(priv);
+
+ return 0;
+}
static void digi_read_bulk_callback(struct urb *urb)
{
diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c
index 20a132e..4264821a 100644
--- a/drivers/usb/serial/ipw.c
+++ b/drivers/usb/serial/ipw.c
@@ -203,8 +203,7 @@
return 0;
}
-/* fake probe - only to allocate data structures */
-static int ipw_probe(struct usb_serial *serial, const struct usb_device_id *id)
+static int ipw_attach(struct usb_serial *serial)
{
struct usb_wwan_intf_private *data;
@@ -303,9 +302,9 @@
.num_ports = 1,
.open = ipw_open,
.close = ipw_close,
- .probe = ipw_probe,
- .attach = usb_wwan_startup,
+ .attach = ipw_attach,
.release = ipw_release,
+ .port_probe = usb_wwan_port_probe,
.port_remove = usb_wwan_port_remove,
.dtr_rts = ipw_dtr_rts,
.write = usb_wwan_write,
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index 29c943d7..cff8dd5 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -1374,13 +1374,9 @@
data in device_details */
static void keyspan_setup_urbs(struct usb_serial *serial)
{
- int i, j;
struct keyspan_serial_private *s_priv;
const struct keyspan_device_details *d_details;
- struct usb_serial_port *port;
- struct keyspan_port_private *p_priv;
struct callbacks *cback;
- int endp;
s_priv = usb_get_serial_data(serial);
d_details = s_priv->device_details;
@@ -1404,45 +1400,6 @@
(serial, d_details->glocont_endpoint, USB_DIR_OUT,
serial, s_priv->glocont_buf, GLOCONT_BUFLEN,
cback->glocont_callback);
-
- /* Setup endpoints for each port specific thing */
- for (i = 0; i < d_details->num_ports; i++) {
- port = serial->port[i];
- p_priv = usb_get_serial_port_data(port);
-
- /* Do indat endpoints first, once for each flip */
- endp = d_details->indat_endpoints[i];
- for (j = 0; j <= d_details->indat_endp_flip; ++j, ++endp) {
- p_priv->in_urbs[j] = keyspan_setup_urb
- (serial, endp, USB_DIR_IN, port,
- p_priv->in_buffer[j], 64,
- cback->indat_callback);
- }
- for (; j < 2; ++j)
- p_priv->in_urbs[j] = NULL;
-
- /* outdat endpoints also have flip */
- endp = d_details->outdat_endpoints[i];
- for (j = 0; j <= d_details->outdat_endp_flip; ++j, ++endp) {
- p_priv->out_urbs[j] = keyspan_setup_urb
- (serial, endp, USB_DIR_OUT, port,
- p_priv->out_buffer[j], 64,
- cback->outdat_callback);
- }
- for (; j < 2; ++j)
- p_priv->out_urbs[j] = NULL;
-
- /* inack endpoint */
- p_priv->inack_urb = keyspan_setup_urb
- (serial, d_details->inack_endpoints[i], USB_DIR_IN,
- port, p_priv->inack_buffer, 1, cback->inack_callback);
-
- /* outcont endpoint */
- p_priv->outcont_urb = keyspan_setup_urb
- (serial, d_details->outcont_endpoints[i], USB_DIR_OUT,
- port, p_priv->outcont_buffer, 64,
- cback->outcont_callback);
- }
}
/* usa19 function doesn't require prescaler */
@@ -2407,9 +2364,7 @@
static int keyspan_startup(struct usb_serial *serial)
{
int i, err;
- struct usb_serial_port *port;
struct keyspan_serial_private *s_priv;
- struct keyspan_port_private *p_priv;
const struct keyspan_device_details *d_details;
for (i = 0; (d_details = keyspan_devices[i]) != NULL; ++i)
@@ -2432,19 +2387,6 @@
s_priv->device_details = d_details;
usb_set_serial_data(serial, s_priv);
- /* Now setup per port private data */
- for (i = 0; i < serial->num_ports; i++) {
- port = serial->port[i];
- p_priv = kzalloc(sizeof(struct keyspan_port_private),
- GFP_KERNEL);
- if (!p_priv) {
- dev_dbg(&port->dev, "%s - kmalloc for keyspan_port_private (%d) failed!.\n", __func__, i);
- return 1;
- }
- p_priv->device_details = d_details;
- usb_set_serial_port_data(port, p_priv);
- }
-
keyspan_setup_urbs(serial);
if (s_priv->instat_urb != NULL) {
@@ -2463,59 +2405,111 @@
static void keyspan_disconnect(struct usb_serial *serial)
{
- int i, j;
- struct usb_serial_port *port;
- struct keyspan_serial_private *s_priv;
- struct keyspan_port_private *p_priv;
+ struct keyspan_serial_private *s_priv;
s_priv = usb_get_serial_data(serial);
- /* Stop reading/writing urbs */
stop_urb(s_priv->instat_urb);
stop_urb(s_priv->glocont_urb);
stop_urb(s_priv->indat_urb);
- for (i = 0; i < serial->num_ports; ++i) {
- port = serial->port[i];
- p_priv = usb_get_serial_port_data(port);
- stop_urb(p_priv->inack_urb);
- stop_urb(p_priv->outcont_urb);
- for (j = 0; j < 2; j++) {
- stop_urb(p_priv->in_urbs[j]);
- stop_urb(p_priv->out_urbs[j]);
- }
- }
-
- /* Now free them */
- usb_free_urb(s_priv->instat_urb);
- usb_free_urb(s_priv->indat_urb);
- usb_free_urb(s_priv->glocont_urb);
- for (i = 0; i < serial->num_ports; ++i) {
- port = serial->port[i];
- p_priv = usb_get_serial_port_data(port);
- usb_free_urb(p_priv->inack_urb);
- usb_free_urb(p_priv->outcont_urb);
- for (j = 0; j < 2; j++) {
- usb_free_urb(p_priv->in_urbs[j]);
- usb_free_urb(p_priv->out_urbs[j]);
- }
- }
}
static void keyspan_release(struct usb_serial *serial)
{
- int i;
- struct usb_serial_port *port;
- struct keyspan_serial_private *s_priv;
+ struct keyspan_serial_private *s_priv;
s_priv = usb_get_serial_data(serial);
- kfree(s_priv);
+ usb_free_urb(s_priv->instat_urb);
+ usb_free_urb(s_priv->indat_urb);
+ usb_free_urb(s_priv->glocont_urb);
- /* Now free per port private data */
- for (i = 0; i < serial->num_ports; i++) {
- port = serial->port[i];
- kfree(usb_get_serial_port_data(port));
+ kfree(s_priv);
+}
+
+static int keyspan_port_probe(struct usb_serial_port *port)
+{
+ struct usb_serial *serial = port->serial;
+ struct keyspan_serial_private *s_priv;
+ struct keyspan_port_private *p_priv;
+ const struct keyspan_device_details *d_details;
+ struct callbacks *cback;
+ int endp;
+ int port_num;
+ int i;
+
+ s_priv = usb_get_serial_data(serial);
+ d_details = s_priv->device_details;
+
+ p_priv = kzalloc(sizeof(*p_priv), GFP_KERNEL);
+ if (!p_priv)
+ return -ENOMEM;
+
+ p_priv->device_details = d_details;
+
+ /* Setup values for the various callback routines */
+ cback = &keyspan_callbacks[d_details->msg_format];
+
+ port_num = port->number - port->serial->minor;
+
+ /* Do indat endpoints first, once for each flip */
+ endp = d_details->indat_endpoints[port_num];
+ for (i = 0; i <= d_details->indat_endp_flip; ++i, ++endp) {
+ p_priv->in_urbs[i] = keyspan_setup_urb(serial, endp,
+ USB_DIR_IN, port,
+ p_priv->in_buffer[i], 64,
+ cback->indat_callback);
}
+ /* outdat endpoints also have flip */
+ endp = d_details->outdat_endpoints[port_num];
+ for (i = 0; i <= d_details->outdat_endp_flip; ++i, ++endp) {
+ p_priv->out_urbs[i] = keyspan_setup_urb(serial, endp,
+ USB_DIR_OUT, port,
+ p_priv->out_buffer[i], 64,
+ cback->outdat_callback);
+ }
+ /* inack endpoint */
+ p_priv->inack_urb = keyspan_setup_urb(serial,
+ d_details->inack_endpoints[port_num],
+ USB_DIR_IN, port,
+ p_priv->inack_buffer, 1,
+ cback->inack_callback);
+ /* outcont endpoint */
+ p_priv->outcont_urb = keyspan_setup_urb(serial,
+ d_details->outcont_endpoints[port_num],
+ USB_DIR_OUT, port,
+ p_priv->outcont_buffer, 64,
+ cback->outcont_callback);
+
+ usb_set_serial_port_data(port, p_priv);
+
+ return 0;
+}
+
+static int keyspan_port_remove(struct usb_serial_port *port)
+{
+ struct keyspan_port_private *p_priv;
+ int i;
+
+ p_priv = usb_get_serial_port_data(port);
+
+ stop_urb(p_priv->inack_urb);
+ stop_urb(p_priv->outcont_urb);
+ for (i = 0; i < 2; i++) {
+ stop_urb(p_priv->in_urbs[i]);
+ stop_urb(p_priv->out_urbs[i]);
+ }
+
+ usb_free_urb(p_priv->inack_urb);
+ usb_free_urb(p_priv->outcont_urb);
+ for (i = 0; i < 2; i++) {
+ usb_free_urb(p_priv->in_urbs[i]);
+ usb_free_urb(p_priv->out_urbs[i]);
+ }
+
+ kfree(p_priv);
+
+ return 0;
}
MODULE_AUTHOR(DRIVER_AUTHOR);
diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h
index 0a8a40b..0273dda 100644
--- a/drivers/usb/serial/keyspan.h
+++ b/drivers/usb/serial/keyspan.h
@@ -42,6 +42,8 @@
static int keyspan_startup (struct usb_serial *serial);
static void keyspan_disconnect (struct usb_serial *serial);
static void keyspan_release (struct usb_serial *serial);
+static int keyspan_port_probe(struct usb_serial_port *port);
+static int keyspan_port_remove(struct usb_serial_port *port);
static int keyspan_write_room (struct tty_struct *tty);
static int keyspan_write (struct tty_struct *tty,
@@ -567,6 +569,8 @@
.attach = keyspan_startup,
.disconnect = keyspan_disconnect,
.release = keyspan_release,
+ .port_probe = keyspan_port_probe,
+ .port_remove = keyspan_port_remove,
};
static struct usb_serial_driver keyspan_2port_device = {
@@ -589,6 +593,8 @@
.attach = keyspan_startup,
.disconnect = keyspan_disconnect,
.release = keyspan_release,
+ .port_probe = keyspan_port_probe,
+ .port_remove = keyspan_port_remove,
};
static struct usb_serial_driver keyspan_4port_device = {
@@ -611,6 +617,8 @@
.attach = keyspan_startup,
.disconnect = keyspan_disconnect,
.release = keyspan_release,
+ .port_probe = keyspan_port_probe,
+ .port_remove = keyspan_port_remove,
};
static struct usb_serial_driver * const serial_drivers[] = {
diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c
index f394771..8a20810 100644
--- a/drivers/usb/serial/mct_u232.c
+++ b/drivers/usb/serial/mct_u232.c
@@ -49,7 +49,8 @@
* Function prototypes
*/
static int mct_u232_startup(struct usb_serial *serial);
-static void mct_u232_release(struct usb_serial *serial);
+static int mct_u232_port_probe(struct usb_serial_port *port);
+static int mct_u232_port_remove(struct usb_serial_port *remove);
static int mct_u232_open(struct tty_struct *tty, struct usb_serial_port *port);
static void mct_u232_close(struct usb_serial_port *port);
static void mct_u232_dtr_rts(struct usb_serial_port *port, int on);
@@ -99,7 +100,8 @@
.tiocmget = mct_u232_tiocmget,
.tiocmset = mct_u232_tiocmset,
.attach = mct_u232_startup,
- .release = mct_u232_release,
+ .port_probe = mct_u232_port_probe,
+ .port_remove = mct_u232_port_remove,
.ioctl = mct_u232_ioctl,
.get_icount = mct_u232_get_icount,
};
@@ -388,18 +390,8 @@
static int mct_u232_startup(struct usb_serial *serial)
{
- struct mct_u232_private *priv;
struct usb_serial_port *port, *rport;
- priv = kzalloc(sizeof(struct mct_u232_private), GFP_KERNEL);
- if (!priv)
- return -ENOMEM;
- spin_lock_init(&priv->lock);
- init_waitqueue_head(&priv->msr_wait);
- usb_set_serial_port_data(serial->port[0], priv);
-
- init_waitqueue_head(&serial->port[0]->write_wait);
-
/* Puh, that's dirty */
port = serial->port[0];
rport = serial->port[1];
@@ -412,18 +404,31 @@
return 0;
} /* mct_u232_startup */
-
-static void mct_u232_release(struct usb_serial *serial)
+static int mct_u232_port_probe(struct usb_serial_port *port)
{
struct mct_u232_private *priv;
- int i;
- for (i = 0; i < serial->num_ports; ++i) {
- /* My special items, the standard routines free my urbs */
- priv = usb_get_serial_port_data(serial->port[i]);
- kfree(priv);
- }
-} /* mct_u232_release */
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ spin_lock_init(&priv->lock);
+ init_waitqueue_head(&priv->msr_wait);
+
+ usb_set_serial_port_data(port, priv);
+
+ return 0;
+}
+
+static int mct_u232_port_remove(struct usb_serial_port *port)
+{
+ struct mct_u232_private *priv;
+
+ priv = usb_get_serial_port_data(port);
+ kfree(priv);
+
+ return 0;
+}
static int mct_u232_open(struct tty_struct *tty, struct usb_serial_port *port)
{
@@ -515,12 +520,14 @@
static void mct_u232_close(struct usb_serial_port *port)
{
- if (port->serial->dev) {
- /* shutdown our urbs */
- usb_kill_urb(port->write_urb);
- usb_kill_urb(port->read_urb);
- usb_kill_urb(port->interrupt_in_urb);
- }
+ /*
+ * Must kill the read urb as it is actually an interrupt urb, which
+ * generic close thus fails to kill.
+ */
+ usb_kill_urb(port->read_urb);
+ usb_kill_urb(port->interrupt_in_urb);
+
+ usb_serial_generic_close(port);
} /* mct_u232_close */
diff --git a/drivers/usb/serial/metro-usb.c b/drivers/usb/serial/metro-usb.c
index 0b257dd..6f29c74 100644
--- a/drivers/usb/serial/metro-usb.c
+++ b/drivers/usb/serial/metro-usb.c
@@ -179,16 +179,13 @@
{
dev_dbg(&port->dev, "%s\n", __func__);
- if (port->serial->dev) {
- /* Shutdown any interrupt in urbs. */
- if (port->interrupt_in_urb) {
- usb_unlink_urb(port->interrupt_in_urb);
- usb_kill_urb(port->interrupt_in_urb);
- }
+ usb_unlink_urb(port->interrupt_in_urb);
+ usb_kill_urb(port->interrupt_in_urb);
- /* Send deactivate cmd to device */
+ mutex_lock(&port->serial->disc_mutex);
+ if (!port->serial->disconnected)
metrousb_send_unidirectional_cmd(UNI_CMD_CLOSE, port);
- }
+ mutex_unlock(&port->serial->disc_mutex);
}
static int metrousb_open(struct tty_struct *tty, struct usb_serial_port *port)
@@ -271,51 +268,27 @@
return retval;
}
-static void metrousb_shutdown(struct usb_serial *serial)
-{
- int i = 0;
-
- dev_dbg(&serial->dev->dev, "%s\n", __func__);
-
- /* Stop reading and writing on all ports. */
- for (i = 0; i < serial->num_ports; ++i) {
- /* Close any open urbs. */
- metrousb_cleanup(serial->port[i]);
-
- /* Free memory. */
- kfree(usb_get_serial_port_data(serial->port[i]));
- usb_set_serial_port_data(serial->port[i], NULL);
-
- dev_dbg(&serial->dev->dev, "%s - freed port number=%d\n",
- __func__, serial->port[i]->number);
- }
-}
-
-static int metrousb_startup(struct usb_serial *serial)
+static int metrousb_port_probe(struct usb_serial_port *port)
{
struct metrousb_private *metro_priv;
- struct usb_serial_port *port;
- int i = 0;
- dev_dbg(&serial->dev->dev, "%s\n", __func__);
+ metro_priv = kzalloc(sizeof(*metro_priv), GFP_KERNEL);
+ if (!metro_priv)
+ return -ENOMEM;
- /* Loop through the serial ports setting up the private structures.
- * Currently we only use one port. */
- for (i = 0; i < serial->num_ports; ++i) {
- port = serial->port[i];
+ spin_lock_init(&metro_priv->lock);
- /* Declare memory. */
- metro_priv = kzalloc(sizeof(struct metrousb_private), GFP_KERNEL);
- if (!metro_priv)
- return -ENOMEM;
+ usb_set_serial_port_data(port, metro_priv);
- /* Initialize memory. */
- spin_lock_init(&metro_priv->lock);
- usb_set_serial_port_data(port, metro_priv);
+ return 0;
+}
- dev_dbg(&serial->dev->dev, "%s - port number=%d\n ",
- __func__, port->number);
- }
+static int metrousb_port_remove(struct usb_serial_port *port)
+{
+ struct metrousb_private *metro_priv;
+
+ metro_priv = usb_get_serial_port_data(port);
+ kfree(metro_priv);
return 0;
}
@@ -414,8 +387,8 @@
.close = metrousb_cleanup,
.read_int_callback = metrousb_read_int_callback,
.write_int_callback = metrousb_write_int_callback,
- .attach = metrousb_startup,
- .release = metrousb_shutdown,
+ .port_probe = metrousb_port_probe,
+ .port_remove = metrousb_port_remove,
.throttle = metrousb_throttle,
.unthrottle = metrousb_unthrottle,
.tiocmget = metrousb_tiocmget,
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index 1bf1ad0..7526742 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -1966,9 +1966,7 @@
static int mos7720_startup(struct usb_serial *serial)
{
- struct moschip_port *mos7720_port;
struct usb_device *dev;
- int i;
char data;
u16 product;
int ret_val;
@@ -1999,29 +1997,6 @@
serial->port[1]->interrupt_in_buffer = NULL;
}
-
- /* set up serial port private structures */
- for (i = 0; i < serial->num_ports; ++i) {
- mos7720_port = kzalloc(sizeof(struct moschip_port), GFP_KERNEL);
- if (mos7720_port == NULL) {
- dev_err(&dev->dev, "%s - Out of memory\n", __func__);
- return -ENOMEM;
- }
-
- /* Initialize all port interrupt end point to port 0 int
- * endpoint. Our device has only one interrupt endpoint
- * common to all ports */
- serial->port[i]->interrupt_in_endpointAddress =
- serial->port[0]->interrupt_in_endpointAddress;
-
- mos7720_port->port = serial->port[i];
- usb_set_serial_port_data(serial->port[i], mos7720_port);
-
- dev_dbg(&dev->dev, "port number is %d\n", serial->port[i]->number);
- dev_dbg(&dev->dev, "serial number is %d\n", serial->minor);
- }
-
-
/* setting configuration feature to one */
usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
(__u8)0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5*HZ);
@@ -2049,8 +2024,6 @@
static void mos7720_release(struct usb_serial *serial)
{
- int i;
-
#ifdef CONFIG_USB_SERIAL_MOS7715_PARPORT
/* close the parallel port */
@@ -2089,9 +2062,36 @@
kref_put(&mos_parport->ref_count, destroy_mos_parport);
}
#endif
- /* free private structure allocated for serial port */
- for (i = 0; i < serial->num_ports; ++i)
- kfree(usb_get_serial_port_data(serial->port[i]));
+}
+
+static int mos7720_port_probe(struct usb_serial_port *port)
+{
+ struct moschip_port *mos7720_port;
+
+ mos7720_port = kzalloc(sizeof(*mos7720_port), GFP_KERNEL);
+ if (!mos7720_port)
+ return -ENOMEM;
+
+ /* Initialize all port interrupt end point to port 0 int endpoint.
+ * Our device has only one interrupt endpoint common to all ports.
+ */
+ port->interrupt_in_endpointAddress =
+ port->serial->port[0]->interrupt_in_endpointAddress;
+ mos7720_port->port = port;
+
+ usb_set_serial_port_data(port, mos7720_port);
+
+ return 0;
+}
+
+static int mos7720_port_remove(struct usb_serial_port *port)
+{
+ struct moschip_port *mos7720_port;
+
+ mos7720_port = usb_get_serial_port_data(port);
+ kfree(mos7720_port);
+
+ return 0;
}
static struct usb_serial_driver moschip7720_2port_driver = {
@@ -2109,6 +2109,8 @@
.probe = mos77xx_probe,
.attach = mos7720_startup,
.release = mos7720_release,
+ .port_probe = mos7720_port_probe,
+ .port_remove = mos7720_port_remove,
.ioctl = mos7720_ioctl,
.tiocmget = mos7720_tiocmget,
.tiocmset = mos7720_tiocmset,
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index d6d4eec..1cf3375 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -218,12 +218,10 @@
int port_num; /*Actual port number in the device(1,2,etc) */
struct urb *write_urb; /* write URB for this port */
struct urb *read_urb; /* read URB for this port */
- struct urb *int_urb;
__u8 shadowLCR; /* last LCR value received */
__u8 shadowMCR; /* last MCR value received */
char open;
char open_ports;
- char zombie;
wait_queue_head_t wait_chase; /* for handling sleeping while waiting for chase to finish */
wait_queue_head_t delta_msr_wait; /* for handling sleeping while waiting for msr change to happen */
int delta_msr_cond;
@@ -478,7 +476,6 @@
struct moschip_port *mos7840_port;
struct device *dev = &urb->dev->dev;
__u8 regval = 0x0;
- int result = 0;
int status = urb->status;
mos7840_port = urb->context;
@@ -495,7 +492,7 @@
return;
default:
dev_dbg(dev, "%s - nonzero urb status received: %d\n", __func__, status);
- goto exit;
+ return;
}
dev_dbg(dev, "%s urb buffer size is %d\n", __func__, urb->actual_length);
@@ -508,16 +505,6 @@
mos7840_handle_new_msr(mos7840_port, regval);
else if (mos7840_port->MsrLsr == 1)
mos7840_handle_new_lsr(mos7840_port, regval);
-
-exit:
- spin_lock(&mos7840_port->pool_lock);
- if (!mos7840_port->zombie)
- result = usb_submit_urb(mos7840_port->int_urb, GFP_ATOMIC);
- spin_unlock(&mos7840_port->pool_lock);
- if (result) {
- dev_err(dev, "%s - Error %d submitting interrupt urb\n",
- __func__, result);
- }
}
static int mos7840_get_reg(struct moschip_port *mcs, __u16 Wval, __u16 reg,
@@ -686,14 +673,7 @@
wreg = MODEM_STATUS_REGISTER;
break;
}
- spin_lock(&mos7840_port->pool_lock);
- if (!mos7840_port->zombie) {
- rv = mos7840_get_reg(mos7840_port, wval, wreg, &Data);
- } else {
- spin_unlock(&mos7840_port->pool_lock);
- return;
- }
- spin_unlock(&mos7840_port->pool_lock);
+ rv = mos7840_get_reg(mos7840_port, wval, wreg, &Data);
}
}
}
@@ -2347,309 +2327,249 @@
return mos7840_num_ports;
}
-/****************************************************************************
- * mos7840_startup
- ****************************************************************************/
-
-static int mos7840_startup(struct usb_serial *serial)
+static int mos7840_port_probe(struct usb_serial_port *port)
{
+ struct usb_serial *serial = port->serial;
struct moschip_port *mos7840_port;
- struct usb_device *dev;
- int i, status;
+ int status;
+ int pnum;
__u16 Data;
- dev = serial->dev;
-
/* we set up the pointers to the endpoints in the mos7840_open *
* function, as the structures aren't created yet. */
- /* set up port private structures */
- for (i = 0; i < serial->num_ports; ++i) {
- dev_dbg(&dev->dev, "mos7840_startup: configuring port %d............\n", i);
- mos7840_port = kzalloc(sizeof(struct moschip_port), GFP_KERNEL);
- if (mos7840_port == NULL) {
- dev_err(&dev->dev, "%s - Out of memory\n", __func__);
- status = -ENOMEM;
- i--; /* don't follow NULL pointer cleaning up */
- goto error;
- }
+ pnum = port->number - serial->minor;
- /* Initialize all port interrupt end point to port 0 int
- * endpoint. Our device has only one interrupt end point
- * common to all port */
-
- mos7840_port->port = serial->port[i];
- mos7840_set_port_private(serial->port[i], mos7840_port);
- spin_lock_init(&mos7840_port->pool_lock);
-
- /* minor is not initialised until later by
- * usb-serial.c:get_free_serial() and cannot therefore be used
- * to index device instances */
- mos7840_port->port_num = i + 1;
- dev_dbg(&dev->dev, "serial->port[i]->number = %d\n", serial->port[i]->number);
- dev_dbg(&dev->dev, "serial->port[i]->serial->minor = %d\n", serial->port[i]->serial->minor);
- dev_dbg(&dev->dev, "mos7840_port->port_num = %d\n", mos7840_port->port_num);
- dev_dbg(&dev->dev, "serial->minor = %d\n", serial->minor);
-
- if (mos7840_port->port_num == 1) {
- mos7840_port->SpRegOffset = 0x0;
- mos7840_port->ControlRegOffset = 0x1;
- mos7840_port->DcrRegOffset = 0x4;
- } else if ((mos7840_port->port_num == 2)
- && (serial->num_ports == 4)) {
- mos7840_port->SpRegOffset = 0x8;
- mos7840_port->ControlRegOffset = 0x9;
- mos7840_port->DcrRegOffset = 0x16;
- } else if ((mos7840_port->port_num == 2)
- && (serial->num_ports == 2)) {
- mos7840_port->SpRegOffset = 0xa;
- mos7840_port->ControlRegOffset = 0xb;
- mos7840_port->DcrRegOffset = 0x19;
- } else if ((mos7840_port->port_num == 3)
- && (serial->num_ports == 4)) {
- mos7840_port->SpRegOffset = 0xa;
- mos7840_port->ControlRegOffset = 0xb;
- mos7840_port->DcrRegOffset = 0x19;
- } else if ((mos7840_port->port_num == 4)
- && (serial->num_ports == 4)) {
- mos7840_port->SpRegOffset = 0xc;
- mos7840_port->ControlRegOffset = 0xd;
- mos7840_port->DcrRegOffset = 0x1c;
- }
- mos7840_dump_serial_port(serial->port[i], mos7840_port);
- mos7840_set_port_private(serial->port[i], mos7840_port);
-
- /* enable rx_disable bit in control register */
- status = mos7840_get_reg_sync(serial->port[i],
- mos7840_port->ControlRegOffset, &Data);
- if (status < 0) {
- dev_dbg(&dev->dev, "Reading ControlReg failed status-0x%x\n", status);
- break;
- } else
- dev_dbg(&dev->dev, "ControlReg Reading success val is %x, status%d\n", Data, status);
- Data |= 0x08; /* setting driver done bit */
- Data |= 0x04; /* sp1_bit to have cts change reflect in
- modem status reg */
-
- /* Data |= 0x20; //rx_disable bit */
- status = mos7840_set_reg_sync(serial->port[i],
- mos7840_port->ControlRegOffset, Data);
- if (status < 0) {
- dev_dbg(&dev->dev, "Writing ControlReg failed(rx_disable) status-0x%x\n", status);
- break;
- } else
- dev_dbg(&dev->dev, "ControlReg Writing success(rx_disable) status%d\n", status);
-
- /* Write default values in DCR (i.e 0x01 in DCR0, 0x05 in DCR2
- and 0x24 in DCR3 */
- Data = 0x01;
- status = mos7840_set_reg_sync(serial->port[i],
- (__u16) (mos7840_port->DcrRegOffset + 0), Data);
- if (status < 0) {
- dev_dbg(&dev->dev, "Writing DCR0 failed status-0x%x\n", status);
- break;
- } else
- dev_dbg(&dev->dev, "DCR0 Writing success status%d\n", status);
-
- Data = 0x05;
- status = mos7840_set_reg_sync(serial->port[i],
- (__u16) (mos7840_port->DcrRegOffset + 1), Data);
- if (status < 0) {
- dev_dbg(&dev->dev, "Writing DCR1 failed status-0x%x\n", status);
- break;
- } else
- dev_dbg(&dev->dev, "DCR1 Writing success status%d\n", status);
-
- Data = 0x24;
- status = mos7840_set_reg_sync(serial->port[i],
- (__u16) (mos7840_port->DcrRegOffset + 2), Data);
- if (status < 0) {
- dev_dbg(&dev->dev, "Writing DCR2 failed status-0x%x\n", status);
- break;
- } else
- dev_dbg(&dev->dev, "DCR2 Writing success status%d\n", status);
-
- /* write values in clkstart0x0 and clkmulti 0x20 */
- Data = 0x0;
- status = mos7840_set_reg_sync(serial->port[i],
- CLK_START_VALUE_REGISTER, Data);
- if (status < 0) {
- dev_dbg(&dev->dev, "Writing CLK_START_VALUE_REGISTER failed status-0x%x\n", status);
- break;
- } else
- dev_dbg(&dev->dev, "CLK_START_VALUE_REGISTER Writing success status%d\n", status);
-
- Data = 0x20;
- status = mos7840_set_reg_sync(serial->port[i],
- CLK_MULTI_REGISTER, Data);
- if (status < 0) {
- dev_dbg(&dev->dev, "Writing CLK_MULTI_REGISTER failed status-0x%x\n", status);
- goto error;
- } else
- dev_dbg(&dev->dev, "CLK_MULTI_REGISTER Writing success status%d\n", status);
-
- /* write value 0x0 to scratchpad register */
- Data = 0x00;
- status = mos7840_set_uart_reg(serial->port[i],
- SCRATCH_PAD_REGISTER, Data);
- if (status < 0) {
- dev_dbg(&dev->dev, "Writing SCRATCH_PAD_REGISTER failed status-0x%x\n", status);
- break;
- } else
- dev_dbg(&dev->dev, "SCRATCH_PAD_REGISTER Writing success status%d\n", status);
-
- /* Zero Length flag register */
- if ((mos7840_port->port_num != 1)
- && (serial->num_ports == 2)) {
-
- Data = 0xff;
- status = mos7840_set_reg_sync(serial->port[i],
- (__u16) (ZLP_REG1 +
- ((__u16)mos7840_port->port_num)), Data);
- dev_dbg(&dev->dev, "ZLIP offset %x\n",
- (__u16)(ZLP_REG1 + ((__u16) mos7840_port->port_num)));
- if (status < 0) {
- dev_dbg(&dev->dev, "Writing ZLP_REG%d failed status-0x%x\n", i + 2, status);
- break;
- } else
- dev_dbg(&dev->dev, "ZLP_REG%d Writing success status%d\n", i + 2, status);
- } else {
- Data = 0xff;
- status = mos7840_set_reg_sync(serial->port[i],
- (__u16) (ZLP_REG1 +
- ((__u16)mos7840_port->port_num) - 0x1), Data);
- dev_dbg(&dev->dev, "ZLIP offset %x\n",
- (__u16)(ZLP_REG1 + ((__u16) mos7840_port->port_num) - 0x1));
- if (status < 0) {
- dev_dbg(&dev->dev, "Writing ZLP_REG%d failed status-0x%x\n", i + 1, status);
- break;
- } else
- dev_dbg(&dev->dev, "ZLP_REG%d Writing success status%d\n", i + 1, status);
-
- }
- mos7840_port->control_urb = usb_alloc_urb(0, GFP_KERNEL);
- mos7840_port->ctrl_buf = kmalloc(16, GFP_KERNEL);
- mos7840_port->dr = kmalloc(sizeof(struct usb_ctrlrequest),
- GFP_KERNEL);
- if (!mos7840_port->control_urb || !mos7840_port->ctrl_buf ||
- !mos7840_port->dr) {
- status = -ENOMEM;
- goto error;
- }
-
- mos7840_port->has_led = false;
-
- /* Initialize LED timers */
- if (device_type == MOSCHIP_DEVICE_ID_7810) {
- mos7840_port->has_led = true;
-
- init_timer(&mos7840_port->led_timer1);
- mos7840_port->led_timer1.function = mos7840_led_off;
- mos7840_port->led_timer1.expires =
- jiffies + msecs_to_jiffies(LED_ON_MS);
- mos7840_port->led_timer1.data =
- (unsigned long)mos7840_port;
-
- init_timer(&mos7840_port->led_timer2);
- mos7840_port->led_timer2.function =
- mos7840_led_flag_off;
- mos7840_port->led_timer2.expires =
- jiffies + msecs_to_jiffies(LED_OFF_MS);
- mos7840_port->led_timer2.data =
- (unsigned long)mos7840_port;
-
- mos7840_port->led_flag = false;
-
- /* Turn off LED */
- mos7840_set_led_sync(serial->port[i],
- MODEM_CONTROL_REGISTER, 0x0300);
- }
+ dev_dbg(&port->dev, "mos7840_startup: configuring port %d\n", pnum);
+ mos7840_port = kzalloc(sizeof(struct moschip_port), GFP_KERNEL);
+ if (mos7840_port == NULL) {
+ dev_err(&port->dev, "%s - Out of memory\n", __func__);
+ return -ENOMEM;
}
- /* Zero Length flag enable */
- Data = 0x0f;
- status = mos7840_set_reg_sync(serial->port[0], ZLP_REG5, Data);
+ /* Initialize all port interrupt end point to port 0 int
+ * endpoint. Our device has only one interrupt end point
+ * common to all port */
+
+ mos7840_port->port = port;
+ mos7840_set_port_private(port, mos7840_port);
+ spin_lock_init(&mos7840_port->pool_lock);
+
+ /* minor is not initialised until later by
+ * usb-serial.c:get_free_serial() and cannot therefore be used
+ * to index device instances */
+ mos7840_port->port_num = pnum + 1;
+ dev_dbg(&port->dev, "port->number = %d\n", port->number);
+ dev_dbg(&port->dev, "port->serial->minor = %d\n", port->serial->minor);
+ dev_dbg(&port->dev, "mos7840_port->port_num = %d\n", mos7840_port->port_num);
+ dev_dbg(&port->dev, "serial->minor = %d\n", serial->minor);
+
+ if (mos7840_port->port_num == 1) {
+ mos7840_port->SpRegOffset = 0x0;
+ mos7840_port->ControlRegOffset = 0x1;
+ mos7840_port->DcrRegOffset = 0x4;
+ } else if ((mos7840_port->port_num == 2) && (serial->num_ports == 4)) {
+ mos7840_port->SpRegOffset = 0x8;
+ mos7840_port->ControlRegOffset = 0x9;
+ mos7840_port->DcrRegOffset = 0x16;
+ } else if ((mos7840_port->port_num == 2) && (serial->num_ports == 2)) {
+ mos7840_port->SpRegOffset = 0xa;
+ mos7840_port->ControlRegOffset = 0xb;
+ mos7840_port->DcrRegOffset = 0x19;
+ } else if ((mos7840_port->port_num == 3) && (serial->num_ports == 4)) {
+ mos7840_port->SpRegOffset = 0xa;
+ mos7840_port->ControlRegOffset = 0xb;
+ mos7840_port->DcrRegOffset = 0x19;
+ } else if ((mos7840_port->port_num == 4) && (serial->num_ports == 4)) {
+ mos7840_port->SpRegOffset = 0xc;
+ mos7840_port->ControlRegOffset = 0xd;
+ mos7840_port->DcrRegOffset = 0x1c;
+ }
+ mos7840_dump_serial_port(port, mos7840_port);
+ mos7840_set_port_private(port, mos7840_port);
+
+ /* enable rx_disable bit in control register */
+ status = mos7840_get_reg_sync(port,
+ mos7840_port->ControlRegOffset, &Data);
if (status < 0) {
- dev_dbg(&dev->dev, "Writing ZLP_REG5 failed status-0x%x\n", status);
+ dev_dbg(&port->dev, "Reading ControlReg failed status-0x%x\n", status);
+ goto out;
+ } else
+ dev_dbg(&port->dev, "ControlReg Reading success val is %x, status%d\n", Data, status);
+ Data |= 0x08; /* setting driver done bit */
+ Data |= 0x04; /* sp1_bit to have cts change reflect in
+ modem status reg */
+
+ /* Data |= 0x20; //rx_disable bit */
+ status = mos7840_set_reg_sync(port,
+ mos7840_port->ControlRegOffset, Data);
+ if (status < 0) {
+ dev_dbg(&port->dev, "Writing ControlReg failed(rx_disable) status-0x%x\n", status);
+ goto out;
+ } else
+ dev_dbg(&port->dev, "ControlReg Writing success(rx_disable) status%d\n", status);
+
+ /* Write default values in DCR (i.e 0x01 in DCR0, 0x05 in DCR2
+ and 0x24 in DCR3 */
+ Data = 0x01;
+ status = mos7840_set_reg_sync(port,
+ (__u16) (mos7840_port->DcrRegOffset + 0), Data);
+ if (status < 0) {
+ dev_dbg(&port->dev, "Writing DCR0 failed status-0x%x\n", status);
+ goto out;
+ } else
+ dev_dbg(&port->dev, "DCR0 Writing success status%d\n", status);
+
+ Data = 0x05;
+ status = mos7840_set_reg_sync(port,
+ (__u16) (mos7840_port->DcrRegOffset + 1), Data);
+ if (status < 0) {
+ dev_dbg(&port->dev, "Writing DCR1 failed status-0x%x\n", status);
+ goto out;
+ } else
+ dev_dbg(&port->dev, "DCR1 Writing success status%d\n", status);
+
+ Data = 0x24;
+ status = mos7840_set_reg_sync(port,
+ (__u16) (mos7840_port->DcrRegOffset + 2), Data);
+ if (status < 0) {
+ dev_dbg(&port->dev, "Writing DCR2 failed status-0x%x\n", status);
+ goto out;
+ } else
+ dev_dbg(&port->dev, "DCR2 Writing success status%d\n", status);
+
+ /* write values in clkstart0x0 and clkmulti 0x20 */
+ Data = 0x0;
+ status = mos7840_set_reg_sync(port, CLK_START_VALUE_REGISTER, Data);
+ if (status < 0) {
+ dev_dbg(&port->dev, "Writing CLK_START_VALUE_REGISTER failed status-0x%x\n", status);
+ goto out;
+ } else
+ dev_dbg(&port->dev, "CLK_START_VALUE_REGISTER Writing success status%d\n", status);
+
+ Data = 0x20;
+ status = mos7840_set_reg_sync(port, CLK_MULTI_REGISTER, Data);
+ if (status < 0) {
+ dev_dbg(&port->dev, "Writing CLK_MULTI_REGISTER failed status-0x%x\n", status);
goto error;
} else
- dev_dbg(&dev->dev, "ZLP_REG5 Writing success status%d\n", status);
+ dev_dbg(&port->dev, "CLK_MULTI_REGISTER Writing success status%d\n", status);
- /* setting configuration feature to one */
- usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
- (__u8) 0x03, 0x00, 0x01, 0x00, NULL, 0x00, MOS_WDR_TIMEOUT);
+ /* write value 0x0 to scratchpad register */
+ Data = 0x00;
+ status = mos7840_set_uart_reg(port, SCRATCH_PAD_REGISTER, Data);
+ if (status < 0) {
+ dev_dbg(&port->dev, "Writing SCRATCH_PAD_REGISTER failed status-0x%x\n", status);
+ goto out;
+ } else
+ dev_dbg(&port->dev, "SCRATCH_PAD_REGISTER Writing success status%d\n", status);
+
+ /* Zero Length flag register */
+ if ((mos7840_port->port_num != 1) && (serial->num_ports == 2)) {
+ Data = 0xff;
+ status = mos7840_set_reg_sync(port,
+ (__u16) (ZLP_REG1 +
+ ((__u16)mos7840_port->port_num)), Data);
+ dev_dbg(&port->dev, "ZLIP offset %x\n",
+ (__u16)(ZLP_REG1 + ((__u16) mos7840_port->port_num)));
+ if (status < 0) {
+ dev_dbg(&port->dev, "Writing ZLP_REG%d failed status-0x%x\n", pnum + 2, status);
+ goto out;
+ } else
+ dev_dbg(&port->dev, "ZLP_REG%d Writing success status%d\n", pnum + 2, status);
+ } else {
+ Data = 0xff;
+ status = mos7840_set_reg_sync(port,
+ (__u16) (ZLP_REG1 +
+ ((__u16)mos7840_port->port_num) - 0x1), Data);
+ dev_dbg(&port->dev, "ZLIP offset %x\n",
+ (__u16)(ZLP_REG1 + ((__u16) mos7840_port->port_num) - 0x1));
+ if (status < 0) {
+ dev_dbg(&port->dev, "Writing ZLP_REG%d failed status-0x%x\n", pnum + 1, status);
+ goto out;
+ } else
+ dev_dbg(&port->dev, "ZLP_REG%d Writing success status%d\n", pnum + 1, status);
+
+ }
+ mos7840_port->control_urb = usb_alloc_urb(0, GFP_KERNEL);
+ mos7840_port->ctrl_buf = kmalloc(16, GFP_KERNEL);
+ mos7840_port->dr = kmalloc(sizeof(struct usb_ctrlrequest),
+ GFP_KERNEL);
+ if (!mos7840_port->control_urb || !mos7840_port->ctrl_buf ||
+ !mos7840_port->dr) {
+ status = -ENOMEM;
+ goto error;
+ }
+
+ mos7840_port->has_led = false;
+
+ /* Initialize LED timers */
+ if (device_type == MOSCHIP_DEVICE_ID_7810) {
+ mos7840_port->has_led = true;
+
+ init_timer(&mos7840_port->led_timer1);
+ mos7840_port->led_timer1.function = mos7840_led_off;
+ mos7840_port->led_timer1.expires =
+ jiffies + msecs_to_jiffies(LED_ON_MS);
+ mos7840_port->led_timer1.data = (unsigned long)mos7840_port;
+
+ init_timer(&mos7840_port->led_timer2);
+ mos7840_port->led_timer2.function = mos7840_led_flag_off;
+ mos7840_port->led_timer2.expires =
+ jiffies + msecs_to_jiffies(LED_OFF_MS);
+ mos7840_port->led_timer2.data = (unsigned long)mos7840_port;
+
+ mos7840_port->led_flag = false;
+
+ /* Turn off LED */
+ mos7840_set_led_sync(port, MODEM_CONTROL_REGISTER, 0x0300);
+ }
+out:
+ if (pnum == serial->num_ports - 1) {
+ /* Zero Length flag enable */
+ Data = 0x0f;
+ status = mos7840_set_reg_sync(serial->port[0], ZLP_REG5, Data);
+ if (status < 0) {
+ dev_dbg(&port->dev, "Writing ZLP_REG5 failed status-0x%x\n", status);
+ goto error;
+ } else
+ dev_dbg(&port->dev, "ZLP_REG5 Writing success status%d\n", status);
+
+ /* setting configuration feature to one */
+ usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
+ 0x03, 0x00, 0x01, 0x00, NULL, 0x00,
+ MOS_WDR_TIMEOUT);
+ }
return 0;
error:
- for (/* nothing */; i >= 0; i--) {
- mos7840_port = mos7840_get_port_private(serial->port[i]);
+ kfree(mos7840_port->dr);
+ kfree(mos7840_port->ctrl_buf);
+ usb_free_urb(mos7840_port->control_urb);
+ kfree(mos7840_port);
- kfree(mos7840_port->dr);
- kfree(mos7840_port->ctrl_buf);
- usb_free_urb(mos7840_port->control_urb);
- kfree(mos7840_port);
- serial->port[i] = NULL;
- }
return status;
}
-/****************************************************************************
- * mos7840_disconnect
- * This function is called whenever the device is removed from the usb bus.
- ****************************************************************************/
-
-static void mos7840_disconnect(struct usb_serial *serial)
+static int mos7840_port_remove(struct usb_serial_port *port)
{
- int i;
- unsigned long flags;
struct moschip_port *mos7840_port;
- /* check for the ports to be closed,close the ports and disconnect */
+ mos7840_port = mos7840_get_port_private(port);
- /* free private structure allocated for serial port *
- * stop reads and writes on all ports */
+ if (mos7840_port->has_led) {
+ /* Turn off LED */
+ mos7840_set_led_sync(port, MODEM_CONTROL_REGISTER, 0x0300);
- for (i = 0; i < serial->num_ports; ++i) {
- mos7840_port = mos7840_get_port_private(serial->port[i]);
- if (mos7840_port) {
- spin_lock_irqsave(&mos7840_port->pool_lock, flags);
- mos7840_port->zombie = 1;
- spin_unlock_irqrestore(&mos7840_port->pool_lock, flags);
- usb_kill_urb(mos7840_port->control_urb);
- }
+ del_timer_sync(&mos7840_port->led_timer1);
+ del_timer_sync(&mos7840_port->led_timer2);
}
-}
+ usb_kill_urb(mos7840_port->control_urb);
+ usb_free_urb(mos7840_port->control_urb);
+ kfree(mos7840_port->ctrl_buf);
+ kfree(mos7840_port->dr);
+ kfree(mos7840_port);
-/****************************************************************************
- * mos7840_release
- * This function is called when the usb_serial structure is freed.
- ****************************************************************************/
-
-static void mos7840_release(struct usb_serial *serial)
-{
- int i;
- struct moschip_port *mos7840_port;
-
- /* check for the ports to be closed,close the ports and disconnect */
-
- /* free private structure allocated for serial port *
- * stop reads and writes on all ports */
-
- for (i = 0; i < serial->num_ports; ++i) {
- mos7840_port = mos7840_get_port_private(serial->port[i]);
- if (mos7840_port) {
- if (mos7840_port->has_led) {
- /* Turn off LED */
- mos7840_set_led_sync(mos7840_port->port,
- MODEM_CONTROL_REGISTER, 0x0300);
-
- del_timer_sync(&mos7840_port->led_timer1);
- del_timer_sync(&mos7840_port->led_timer2);
- }
- kfree(mos7840_port->ctrl_buf);
- kfree(mos7840_port->dr);
- kfree(mos7840_port);
- }
- }
+ return 0;
}
static struct usb_serial_driver moschip7840_4port_device = {
@@ -2677,9 +2597,8 @@
.tiocmget = mos7840_tiocmget,
.tiocmset = mos7840_tiocmset,
.get_icount = mos7840_get_icount,
- .attach = mos7840_startup,
- .disconnect = mos7840_disconnect,
- .release = mos7840_release,
+ .port_probe = mos7840_port_probe,
+ .port_remove = mos7840_port_remove,
.read_bulk_callback = mos7840_bulk_in_callback,
.read_int_callback = mos7840_interrupt_callback,
};
diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c
index 6def58b..9ab73d2 100644
--- a/drivers/usb/serial/omninet.c
+++ b/drivers/usb/serial/omninet.c
@@ -44,8 +44,8 @@
const unsigned char *buf, int count);
static int omninet_write_room(struct tty_struct *tty);
static void omninet_disconnect(struct usb_serial *serial);
-static void omninet_release(struct usb_serial *serial);
-static int omninet_attach(struct usb_serial *serial);
+static int omninet_port_probe(struct usb_serial_port *port);
+static int omninet_port_remove(struct usb_serial_port *port);
static const struct usb_device_id id_table[] = {
{ USB_DEVICE(ZYXEL_VENDOR_ID, ZYXEL_OMNINET_ID) },
@@ -62,7 +62,8 @@
.description = "ZyXEL - omni.net lcd plus usb",
.id_table = id_table,
.num_ports = 1,
- .attach = omninet_attach,
+ .port_probe = omninet_port_probe,
+ .port_remove = omninet_port_remove,
.open = omninet_open,
.close = omninet_close,
.write = omninet_write,
@@ -70,7 +71,6 @@
.read_bulk_callback = omninet_read_bulk_callback,
.write_bulk_callback = omninet_write_bulk_callback,
.disconnect = omninet_disconnect,
- .release = omninet_release,
};
static struct usb_serial_driver * const serial_drivers[] = {
@@ -112,18 +112,26 @@
__u8 od_outseq; /* Sequence number for bulk_out URBs */
};
-static int omninet_attach(struct usb_serial *serial)
+static int omninet_port_probe(struct usb_serial_port *port)
{
struct omninet_data *od;
- struct usb_serial_port *port = serial->port[0];
od = kmalloc(sizeof(struct omninet_data), GFP_KERNEL);
- if (!od) {
- dev_err(&port->dev, "%s- kmalloc(%Zd) failed.\n",
- __func__, sizeof(struct omninet_data));
+ if (!od)
return -ENOMEM;
- }
+
usb_set_serial_port_data(port, od);
+
+ return 0;
+}
+
+static int omninet_port_remove(struct usb_serial_port *port)
+{
+ struct omninet_data *od;
+
+ od = usb_get_serial_port_data(port);
+ kfree(od);
+
return 0;
}
@@ -279,14 +287,6 @@
usb_kill_urb(wport->write_urb);
}
-
-static void omninet_release(struct usb_serial *serial)
-{
- struct usb_serial_port *port = serial->port[0];
-
- kfree(usb_get_serial_port_data(port));
-}
-
module_usb_serial_driver(serial_drivers, id_table);
MODULE_AUTHOR(DRIVER_AUTHOR);
diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c
index 41b1647..6aba731 100644
--- a/drivers/usb/serial/opticon.c
+++ b/drivers/usb/serial/opticon.c
@@ -155,7 +155,11 @@
{
struct usb_serial *serial = port->serial;
int retval;
- u8 buffer[2];
+ u8 *buffer;
+
+ buffer = kzalloc(1, GFP_KERNEL);
+ if (!buffer)
+ return -ENOMEM;
buffer[0] = val;
/* Send the message to the vendor control endpoint
@@ -164,6 +168,7 @@
requesttype,
USB_DIR_OUT|USB_TYPE_VENDOR|USB_RECIP_INTERFACE,
0, 0, buffer, 1, 0);
+ kfree(buffer);
return retval;
}
@@ -281,7 +286,7 @@
if (!dr) {
dev_err(&port->dev, "out of memory\n");
count = -ENOMEM;
- goto error;
+ goto error_no_dr;
}
dr->bRequestType = USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT;
@@ -311,6 +316,8 @@
return count;
error:
+ kfree(dr);
+error_no_dr:
usb_free_urb(urb);
error_no_urb:
kfree(buffer);
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 54d4148..edc64bb 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -47,6 +47,7 @@
/* Function prototypes */
static int option_probe(struct usb_serial *serial,
const struct usb_device_id *id);
+static int option_attach(struct usb_serial *serial);
static void option_release(struct usb_serial *serial);
static int option_send_setup(struct usb_serial_port *port);
static void option_instat_callback(struct urb *urb);
@@ -157,6 +158,7 @@
#define NOVATELWIRELESS_PRODUCT_EVDO_EMBEDDED_HIGHSPEED 0x8001
#define NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_FULLSPEED 0x9000
#define NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_HIGHSPEED 0x9001
+#define NOVATELWIRELESS_PRODUCT_E362 0x9010
#define NOVATELWIRELESS_PRODUCT_G1 0xA001
#define NOVATELWIRELESS_PRODUCT_G1_M 0xA002
#define NOVATELWIRELESS_PRODUCT_G2 0xA010
@@ -192,6 +194,9 @@
#define DELL_PRODUCT_5730_MINICARD_TELUS 0x8181
#define DELL_PRODUCT_5730_MINICARD_VZW 0x8182
+#define DELL_PRODUCT_5800_MINICARD_VZW 0x8195 /* Novatel E362 */
+#define DELL_PRODUCT_5800_V2_MINICARD_VZW 0x8196 /* Novatel E362 */
+
#define KYOCERA_VENDOR_ID 0x0c88
#define KYOCERA_PRODUCT_KPC650 0x17da
#define KYOCERA_PRODUCT_KPC680 0x180a
@@ -282,6 +287,7 @@
/* ALCATEL PRODUCTS */
#define ALCATEL_VENDOR_ID 0x1bbb
#define ALCATEL_PRODUCT_X060S_X200 0x0000
+#define ALCATEL_PRODUCT_X220_X500D 0x0017
#define PIRELLI_VENDOR_ID 0x1266
#define PIRELLI_PRODUCT_C100_1 0x1002
@@ -705,6 +711,7 @@
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_G2) },
/* Novatel Ovation MC551 a.k.a. Verizon USB551L */
{ USB_DEVICE_AND_INTERFACE_INFO(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC551, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_E362, 0xff, 0xff, 0xff) },
{ USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01) },
{ USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01A) },
@@ -727,6 +734,8 @@
{ USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5730_MINICARD_SPRINT) }, /* Dell Wireless 5730 Mobile Broadband EVDO/HSPA Mini-Card */
{ USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5730_MINICARD_TELUS) }, /* Dell Wireless 5730 Mobile Broadband EVDO/HSPA Mini-Card */
{ USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5730_MINICARD_VZW) }, /* Dell Wireless 5730 Mobile Broadband EVDO/HSPA Mini-Card */
+ { USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, DELL_PRODUCT_5800_MINICARD_VZW, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, DELL_PRODUCT_5800_V2_MINICARD_VZW, 0xff, 0xff, 0xff) },
{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_E100A) }, /* ADU-E100, ADU-310 */
{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_500A) },
{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_620UW) },
@@ -1156,6 +1165,7 @@
{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S_X200),
.driver_info = (kernel_ulong_t)&alcatel_x200_blacklist
},
+ { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X220_X500D) },
{ USB_DEVICE(AIRPLUS_VENDOR_ID, AIRPLUS_PRODUCT_MCD650) },
{ USB_DEVICE(TLAYTECH_VENDOR_ID, TLAYTECH_PRODUCT_TEU800) },
{ USB_DEVICE(LONGCHEER_VENDOR_ID, FOUR_G_SYSTEMS_PRODUCT_W14),
@@ -1288,8 +1298,9 @@
.tiocmget = usb_wwan_tiocmget,
.tiocmset = usb_wwan_tiocmset,
.ioctl = usb_wwan_ioctl,
- .attach = usb_wwan_startup,
+ .attach = option_attach,
.release = option_release,
+ .port_probe = usb_wwan_port_probe,
.port_remove = usb_wwan_port_remove,
.read_int_callback = option_instat_callback,
#ifdef CONFIG_PM
@@ -1335,8 +1346,6 @@
static int option_probe(struct usb_serial *serial,
const struct usb_device_id *id)
{
- struct usb_wwan_intf_private *data;
- struct option_private *priv;
struct usb_interface_descriptor *iface_desc =
&serial->interface->cur_altsetting->desc;
struct usb_device_descriptor *dev_desc = &serial->dev->descriptor;
@@ -1374,6 +1383,19 @@
iface_desc->bInterfaceClass != USB_CLASS_CDC_DATA)
return -ENODEV;
+ /* Store device id so we can use it during attach. */
+ usb_set_serial_data(serial, (void *)id);
+
+ return 0;
+}
+
+static int option_attach(struct usb_serial *serial)
+{
+ struct usb_interface_descriptor *iface_desc;
+ const struct usb_device_id *id;
+ struct usb_wwan_intf_private *data;
+ struct option_private *priv;
+
data = kzalloc(sizeof(struct usb_wwan_intf_private), GFP_KERNEL);
if (!data)
return -ENOMEM;
@@ -1384,6 +1406,10 @@
return -ENOMEM;
}
+ /* Retrieve device id stored at probe. */
+ id = usb_get_serial_data(serial);
+ iface_desc = &serial->interface->cur_altsetting->desc;
+
priv->bInterfaceNumber = iface_desc->bInterfaceNumber;
data->private = priv;
diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
index c3ddb65..aa148c2 100644
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -138,7 +138,6 @@
static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
{
- struct usb_wwan_intf_private *data;
struct usb_host_interface *intf = serial->interface->cur_altsetting;
struct device *dev = &serial->dev->dev;
int retval = -ENODEV;
@@ -154,13 +153,6 @@
ifnum = intf->desc.bInterfaceNumber;
dev_dbg(dev, "This Interface = %d\n", ifnum);
- data = kzalloc(sizeof(struct usb_wwan_intf_private),
- GFP_KERNEL);
- if (!data)
- return -ENOMEM;
-
- spin_lock_init(&data->susp_lock);
-
if (nintf == 1) {
/* QDL mode */
/* Gobi 2000 has a single altsetting, older ones have two */
@@ -253,20 +245,28 @@
}
}
- /* Set serial->private if not returning error */
- if (retval == 0)
- usb_set_serial_data(serial, data);
- else
- kfree(data);
-
return retval;
}
+static int qc_attach(struct usb_serial *serial)
+{
+ struct usb_wwan_intf_private *data;
+
+ data = kzalloc(sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ spin_lock_init(&data->susp_lock);
+
+ usb_set_serial_data(serial, data);
+
+ return 0;
+}
+
static void qc_release(struct usb_serial *serial)
{
struct usb_wwan_intf_private *priv = usb_get_serial_data(serial);
- /* Free the private data allocated in qcprobe */
usb_set_serial_data(serial, NULL);
kfree(priv);
}
@@ -285,8 +285,9 @@
.write = usb_wwan_write,
.write_room = usb_wwan_write_room,
.chars_in_buffer = usb_wwan_chars_in_buffer,
- .attach = usb_wwan_startup,
+ .attach = qc_attach,
.release = qc_release,
+ .port_probe = usb_wwan_port_probe,
.port_remove = usb_wwan_port_remove,
#ifdef CONFIG_PM
.suspend = usb_wwan_suspend,
diff --git a/drivers/usb/serial/quatech2.c b/drivers/usb/serial/quatech2.c
index 2cdfdcc..ffcfc96 100644
--- a/drivers/usb/serial/quatech2.c
+++ b/drivers/usb/serial/quatech2.c
@@ -143,12 +143,12 @@
static void qt2_release(struct usb_serial *serial)
{
- int i;
+ struct qt2_serial_private *serial_priv;
- kfree(usb_get_serial_data(serial));
+ serial_priv = usb_get_serial_data(serial);
- for (i = 0; i < serial->num_ports; i++)
- kfree(usb_get_serial_port_data(serial->port[i]));
+ usb_free_urb(serial_priv->read_urb);
+ kfree(serial_priv);
}
static inline int calc_baud_divisor(int baudrate)
@@ -423,11 +423,16 @@
port_priv->is_open = false;
spin_lock_irqsave(&port_priv->urb_lock, flags);
- if (port_priv->write_urb->status == -EINPROGRESS)
- usb_kill_urb(port_priv->write_urb);
+ usb_kill_urb(port_priv->write_urb);
port_priv->urb_in_use = false;
spin_unlock_irqrestore(&port_priv->urb_lock, flags);
+ mutex_lock(&port->serial->disc_mutex);
+ if (port->serial->disconnected) {
+ mutex_unlock(&port->serial->disc_mutex);
+ return;
+ }
+
/* flush the port transmit buffer */
i = usb_control_msg(serial->dev,
usb_rcvctrlpipe(serial->dev, 0),
@@ -459,26 +464,14 @@
dev_err(&port->dev, "%s - close port failed %i\n",
__func__, i);
+ mutex_unlock(&port->serial->disc_mutex);
}
static void qt2_disconnect(struct usb_serial *serial)
{
struct qt2_serial_private *serial_priv = usb_get_serial_data(serial);
- struct qt2_port_private *port_priv;
- int i;
- if (serial_priv->read_urb->status == -EINPROGRESS)
- usb_kill_urb(serial_priv->read_urb);
-
- usb_free_urb(serial_priv->read_urb);
-
- for (i = 0; i < serial->num_ports; i++) {
- port_priv = usb_get_serial_port_data(serial->port[i]);
-
- if (port_priv->write_urb->status == -EINPROGRESS)
- usb_kill_urb(port_priv->write_urb);
- usb_free_urb(port_priv->write_urb);
- }
+ usb_kill_urb(serial_priv->read_urb);
}
static int get_serial_info(struct usb_serial_port *port,
@@ -773,11 +766,9 @@
static int qt2_setup_urbs(struct usb_serial *serial)
{
- struct usb_serial_port *port;
struct usb_serial_port *port0;
struct qt2_serial_private *serial_priv;
- struct qt2_port_private *port_priv;
- int pcount, status;
+ int status;
port0 = serial->port[0];
@@ -795,46 +786,21 @@
sizeof(serial_priv->read_buffer),
qt2_read_bulk_callback, serial);
- /* setup write_urb for each port */
- for (pcount = 0; pcount < serial->num_ports; pcount++) {
-
- port = serial->port[pcount];
- port_priv = usb_get_serial_port_data(port);
-
- port_priv->write_urb = usb_alloc_urb(0, GFP_KERNEL);
- if (!port_priv->write_urb) {
- dev_err(&serial->dev->dev,
- "failed to alloc write_urb for port %i\n",
- pcount);
- return -ENOMEM;
- }
-
- usb_fill_bulk_urb(port_priv->write_urb,
- serial->dev,
- usb_sndbulkpipe(serial->dev,
- port0->
- bulk_out_endpointAddress),
- port_priv->write_buffer,
- sizeof(port_priv->write_buffer),
- qt2_write_bulk_callback, port);
- }
-
status = usb_submit_urb(serial_priv->read_urb, GFP_KERNEL);
if (status != 0) {
dev_err(&serial->dev->dev,
"%s - submit read urb failed %i\n", __func__, status);
+ usb_free_urb(serial_priv->read_urb);
return status;
}
return 0;
-
}
static int qt2_attach(struct usb_serial *serial)
{
struct qt2_serial_private *serial_priv;
- struct qt2_port_private *port_priv;
- int status, pcount;
+ int status;
/* power on unit */
status = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
@@ -854,26 +820,6 @@
usb_set_serial_data(serial, serial_priv);
- for (pcount = 0; pcount < serial->num_ports; pcount++) {
- port_priv = kzalloc(sizeof(*port_priv), GFP_KERNEL);
- if (!port_priv) {
- dev_err(&serial->dev->dev,
- "%s- kmalloc(%Zd) failed.\n", __func__,
- sizeof(*port_priv));
- pcount--;
- status = -ENOMEM;
- goto attach_failed;
- }
-
- spin_lock_init(&port_priv->lock);
- spin_lock_init(&port_priv->urb_lock);
- init_waitqueue_head(&port_priv->delta_msr_wait);
-
- port_priv->port = serial->port[pcount];
-
- usb_set_serial_port_data(serial->port[pcount], port_priv);
- }
-
status = qt2_setup_urbs(serial);
if (status != 0)
goto attach_failed;
@@ -881,14 +827,53 @@
return 0;
attach_failed:
- for (/* empty */; pcount >= 0; pcount--) {
- port_priv = usb_get_serial_port_data(serial->port[pcount]);
- kfree(port_priv);
- }
kfree(serial_priv);
return status;
}
+static int qt2_port_probe(struct usb_serial_port *port)
+{
+ struct usb_serial *serial = port->serial;
+ struct qt2_port_private *port_priv;
+ u8 bEndpointAddress;
+
+ port_priv = kzalloc(sizeof(*port_priv), GFP_KERNEL);
+ if (!port_priv)
+ return -ENOMEM;
+
+ spin_lock_init(&port_priv->lock);
+ spin_lock_init(&port_priv->urb_lock);
+ init_waitqueue_head(&port_priv->delta_msr_wait);
+ port_priv->port = port;
+
+ port_priv->write_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!port_priv->write_urb) {
+ kfree(port_priv);
+ return -ENOMEM;
+ }
+ bEndpointAddress = serial->port[0]->bulk_out_endpointAddress;
+ usb_fill_bulk_urb(port_priv->write_urb, serial->dev,
+ usb_sndbulkpipe(serial->dev, bEndpointAddress),
+ port_priv->write_buffer,
+ sizeof(port_priv->write_buffer),
+ qt2_write_bulk_callback, port);
+
+ usb_set_serial_port_data(port, port_priv);
+
+ return 0;
+}
+
+static int qt2_port_remove(struct usb_serial_port *port)
+{
+ struct qt2_port_private *port_priv;
+
+ port_priv = usb_get_serial_port_data(port);
+ usb_free_urb(port_priv->write_urb);
+ kfree(port_priv);
+
+ return 0;
+}
+
static int qt2_tiocmget(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
@@ -1127,6 +1112,8 @@
.attach = qt2_attach,
.release = qt2_release,
.disconnect = qt2_disconnect,
+ .port_probe = qt2_port_probe,
+ .port_remove = qt2_port_remove,
.dtr_rts = qt2_dtr_rts,
.break_ctl = qt2_break_ctl,
.tiocmget = qt2_tiocmget,
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index 01d882c..270860f 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -161,7 +161,6 @@
{
int result = 0;
struct usb_device *udev;
- struct sierra_intf_private *data;
u8 ifnum;
udev = serial->dev;
@@ -188,11 +187,6 @@
return -ENODEV;
}
- data = serial->private = kzalloc(sizeof(struct sierra_intf_private), GFP_KERNEL);
- if (!data)
- return -ENOMEM;
- spin_lock_init(&data->susp_lock);
-
return result;
}
@@ -884,11 +878,15 @@
static int sierra_startup(struct usb_serial *serial)
{
- struct usb_serial_port *port;
- struct sierra_port_private *portdata;
- struct sierra_iface_info *himemoryp = NULL;
- int i;
- u8 ifnum;
+ struct sierra_intf_private *intfdata;
+
+ intfdata = kzalloc(sizeof(*intfdata), GFP_KERNEL);
+ if (!intfdata)
+ return -ENOMEM;
+
+ spin_lock_init(&intfdata->susp_lock);
+
+ usb_set_serial_data(serial, intfdata);
/* Set Device mode to D0 */
sierra_set_power_state(serial->dev, 0x0000);
@@ -897,68 +895,71 @@
if (nmea)
sierra_vsc_set_nmea(serial->dev, 1);
- /* Now setup per port private data */
- for (i = 0; i < serial->num_ports; i++) {
- port = serial->port[i];
- portdata = kzalloc(sizeof(*portdata), GFP_KERNEL);
- if (!portdata) {
- dev_dbg(&port->dev, "%s: kmalloc for "
- "sierra_port_private (%d) failed!\n",
- __func__, i);
- return -ENOMEM;
- }
- spin_lock_init(&portdata->lock);
- init_usb_anchor(&portdata->active);
- init_usb_anchor(&portdata->delayed);
- ifnum = i;
- /* Assume low memory requirements */
- portdata->num_out_urbs = N_OUT_URB;
- portdata->num_in_urbs = N_IN_URB;
-
- /* Determine actual memory requirements */
- if (serial->num_ports == 1) {
- /* Get interface number for composite device */
- ifnum = sierra_calc_interface(serial);
- himemoryp =
- (struct sierra_iface_info *)&typeB_interface_list;
- if (is_himemory(ifnum, himemoryp)) {
- portdata->num_out_urbs = N_OUT_URB_HM;
- portdata->num_in_urbs = N_IN_URB_HM;
- }
- }
- else {
- himemoryp =
- (struct sierra_iface_info *)&typeA_interface_list;
- if (is_himemory(i, himemoryp)) {
- portdata->num_out_urbs = N_OUT_URB_HM;
- portdata->num_in_urbs = N_IN_URB_HM;
- }
- }
- dev_dbg(&serial->dev->dev,
- "Memory usage (urbs) interface #%d, in=%d, out=%d\n",
- ifnum,portdata->num_in_urbs, portdata->num_out_urbs );
- /* Set the port private data pointer */
- usb_set_serial_port_data(port, portdata);
- }
-
return 0;
}
static void sierra_release(struct usb_serial *serial)
{
- int i;
- struct usb_serial_port *port;
+ struct sierra_intf_private *intfdata;
+
+ intfdata = usb_get_serial_data(serial);
+ kfree(intfdata);
+}
+
+static int sierra_port_probe(struct usb_serial_port *port)
+{
+ struct usb_serial *serial = port->serial;
+ struct sierra_port_private *portdata;
+ const struct sierra_iface_info *himemoryp;
+ u8 ifnum;
+
+ portdata = kzalloc(sizeof(*portdata), GFP_KERNEL);
+ if (!portdata)
+ return -ENOMEM;
+
+ spin_lock_init(&portdata->lock);
+ init_usb_anchor(&portdata->active);
+ init_usb_anchor(&portdata->delayed);
+
+ /* Assume low memory requirements */
+ portdata->num_out_urbs = N_OUT_URB;
+ portdata->num_in_urbs = N_IN_URB;
+
+ /* Determine actual memory requirements */
+ if (serial->num_ports == 1) {
+ /* Get interface number for composite device */
+ ifnum = sierra_calc_interface(serial);
+ himemoryp = &typeB_interface_list;
+ } else {
+ /* This is really the usb-serial port number of the interface
+ * rather than the interface number.
+ */
+ ifnum = port->number - serial->minor;
+ himemoryp = &typeA_interface_list;
+ }
+
+ if (is_himemory(ifnum, himemoryp)) {
+ portdata->num_out_urbs = N_OUT_URB_HM;
+ portdata->num_in_urbs = N_IN_URB_HM;
+ }
+
+ dev_dbg(&port->dev,
+ "Memory usage (urbs) interface #%d, in=%d, out=%d\n",
+ ifnum, portdata->num_in_urbs, portdata->num_out_urbs);
+
+ usb_set_serial_port_data(port, portdata);
+
+ return 0;
+}
+
+static int sierra_port_remove(struct usb_serial_port *port)
+{
struct sierra_port_private *portdata;
- for (i = 0; i < serial->num_ports; ++i) {
- port = serial->port[i];
- if (!port)
- continue;
- portdata = usb_get_serial_port_data(port);
- if (!portdata)
- continue;
- kfree(portdata);
- }
+ portdata = usb_get_serial_port_data(port);
+ kfree(portdata);
+
+ return 0;
}
#ifdef CONFIG_PM
@@ -1062,6 +1063,8 @@
.tiocmset = sierra_tiocmset,
.attach = sierra_startup,
.release = sierra_release,
+ .port_probe = sierra_port_probe,
+ .port_remove = sierra_port_remove,
.suspend = sierra_suspend,
.resume = sierra_resume,
.read_int_callback = sierra_instat_callback,
diff --git a/drivers/usb/serial/usb-wwan.h b/drivers/usb/serial/usb-wwan.h
index 1f034d2..684739b 100644
--- a/drivers/usb/serial/usb-wwan.h
+++ b/drivers/usb/serial/usb-wwan.h
@@ -8,7 +8,7 @@
extern void usb_wwan_dtr_rts(struct usb_serial_port *port, int on);
extern int usb_wwan_open(struct tty_struct *tty, struct usb_serial_port *port);
extern void usb_wwan_close(struct usb_serial_port *port);
-extern int usb_wwan_startup(struct usb_serial *serial);
+extern int usb_wwan_port_probe(struct usb_serial_port *port);
extern int usb_wwan_port_remove(struct usb_serial_port *port);
extern int usb_wwan_write_room(struct tty_struct *tty);
extern void usb_wwan_set_termios(struct tty_struct *tty,
diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c
index e42aa39..a3e9c09 100644
--- a/drivers/usb/serial/usb_wwan.c
+++ b/drivers/usb/serial/usb_wwan.c
@@ -447,15 +447,14 @@
EXPORT_SYMBOL(usb_wwan_close);
/* Helper functions used by usb_wwan_setup_urbs */
-static struct urb *usb_wwan_setup_urb(struct usb_serial *serial, int endpoint,
+static struct urb *usb_wwan_setup_urb(struct usb_serial_port *port,
+ int endpoint,
int dir, void *ctx, char *buf, int len,
void (*callback) (struct urb *))
{
+ struct usb_serial *serial = port->serial;
struct urb *urb;
- if (endpoint == -1)
- return NULL; /* endpoint not needed */
-
urb = usb_alloc_urb(0, GFP_KERNEL); /* No ISO */
if (urb == NULL) {
dev_dbg(&serial->interface->dev,
@@ -472,101 +471,78 @@
return urb;
}
-/* Setup urbs */
-static void usb_wwan_setup_urbs(struct usb_serial *serial)
+int usb_wwan_port_probe(struct usb_serial_port *port)
{
- int i, j;
- struct usb_serial_port *port;
struct usb_wwan_port_private *portdata;
-
- for (i = 0; i < serial->num_ports; i++) {
- port = serial->port[i];
- portdata = usb_get_serial_port_data(port);
-
- /* Do indat endpoints first */
- for (j = 0; j < N_IN_URB; ++j) {
- portdata->in_urbs[j] = usb_wwan_setup_urb(serial,
- port->
- bulk_in_endpointAddress,
- USB_DIR_IN,
- port,
- portdata->
- in_buffer[j],
- IN_BUFLEN,
- usb_wwan_indat_callback);
- }
-
- /* outdat endpoints */
- for (j = 0; j < N_OUT_URB; ++j) {
- portdata->out_urbs[j] = usb_wwan_setup_urb(serial,
- port->
- bulk_out_endpointAddress,
- USB_DIR_OUT,
- port,
- portdata->
- out_buffer
- [j],
- OUT_BUFLEN,
- usb_wwan_outdat_callback);
- }
- }
-}
-
-int usb_wwan_startup(struct usb_serial *serial)
-{
- int i, j, err;
- struct usb_serial_port *port;
- struct usb_wwan_port_private *portdata;
+ struct urb *urb;
u8 *buffer;
+ int err;
+ int i;
- /* Now setup per port private data */
- for (i = 0; i < serial->num_ports; i++) {
- port = serial->port[i];
- portdata = kzalloc(sizeof(*portdata), GFP_KERNEL);
- if (!portdata) {
- dev_dbg(&port->dev, "%s: kmalloc for usb_wwan_port_private (%d) failed!.\n",
- __func__, i);
- return 1;
- }
- init_usb_anchor(&portdata->delayed);
+ portdata = kzalloc(sizeof(*portdata), GFP_KERNEL);
+ if (!portdata)
+ return -ENOMEM;
- for (j = 0; j < N_IN_URB; j++) {
- buffer = (u8 *) __get_free_page(GFP_KERNEL);
- if (!buffer)
- goto bail_out_error;
- portdata->in_buffer[j] = buffer;
- }
+ init_usb_anchor(&portdata->delayed);
- for (j = 0; j < N_OUT_URB; j++) {
- buffer = kmalloc(OUT_BUFLEN, GFP_KERNEL);
- if (!buffer)
- goto bail_out_error2;
- portdata->out_buffer[j] = buffer;
- }
+ for (i = 0; i < N_IN_URB; i++) {
+ if (!port->bulk_in_size)
+ break;
- usb_set_serial_port_data(port, portdata);
+ buffer = (u8 *)__get_free_page(GFP_KERNEL);
+ if (!buffer)
+ goto bail_out_error;
+ portdata->in_buffer[i] = buffer;
- if (!port->interrupt_in_urb)
- continue;
+ urb = usb_wwan_setup_urb(port, port->bulk_in_endpointAddress,
+ USB_DIR_IN, port,
+ buffer, IN_BUFLEN,
+ usb_wwan_indat_callback);
+ portdata->in_urbs[i] = urb;
+ }
+
+ for (i = 0; i < N_OUT_URB; i++) {
+ if (!port->bulk_out_size)
+ break;
+
+ buffer = kmalloc(OUT_BUFLEN, GFP_KERNEL);
+ if (!buffer)
+ goto bail_out_error2;
+ portdata->out_buffer[i] = buffer;
+
+ urb = usb_wwan_setup_urb(port, port->bulk_out_endpointAddress,
+ USB_DIR_OUT, port,
+ buffer, OUT_BUFLEN,
+ usb_wwan_outdat_callback);
+ portdata->out_urbs[i] = urb;
+ }
+
+ usb_set_serial_port_data(port, portdata);
+
+ if (port->interrupt_in_urb) {
err = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
if (err)
dev_dbg(&port->dev, "%s: submit irq_in urb failed %d\n",
__func__, err);
}
- usb_wwan_setup_urbs(serial);
+
return 0;
bail_out_error2:
- for (j = 0; j < N_OUT_URB; j++)
- kfree(portdata->out_buffer[j]);
+ for (i = 0; i < N_OUT_URB; i++) {
+ usb_free_urb(portdata->out_urbs[i]);
+ kfree(portdata->out_buffer[i]);
+ }
bail_out_error:
- for (j = 0; j < N_IN_URB; j++)
- if (portdata->in_buffer[j])
- free_page((unsigned long)portdata->in_buffer[j]);
+ for (i = 0; i < N_IN_URB; i++) {
+ usb_free_urb(portdata->in_urbs[i]);
+ free_page((unsigned long)portdata->in_buffer[i]);
+ }
kfree(portdata);
- return 1;
+
+ return -ENOMEM;
}
-EXPORT_SYMBOL(usb_wwan_startup);
+EXPORT_SYMBOL_GPL(usb_wwan_port_probe);
int usb_wwan_port_remove(struct usb_serial_port *port)
{
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index 346c7ef..b9fca35 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -83,6 +83,8 @@
/* function prototypes for the Connect Tech WhiteHEAT serial converter */
static int whiteheat_attach(struct usb_serial *serial);
static void whiteheat_release(struct usb_serial *serial);
+static int whiteheat_port_probe(struct usb_serial_port *port);
+static int whiteheat_port_remove(struct usb_serial_port *port);
static int whiteheat_open(struct tty_struct *tty,
struct usb_serial_port *port);
static void whiteheat_close(struct usb_serial_port *port);
@@ -117,6 +119,8 @@
.num_ports = 4,
.attach = whiteheat_attach,
.release = whiteheat_release,
+ .port_probe = whiteheat_port_probe,
+ .port_remove = whiteheat_port_remove,
.open = whiteheat_open,
.close = whiteheat_close,
.ioctl = whiteheat_ioctl,
@@ -218,15 +222,12 @@
{
struct usb_serial_port *command_port;
struct whiteheat_command_private *command_info;
- struct usb_serial_port *port;
- struct whiteheat_private *info;
struct whiteheat_hw_info *hw_info;
int pipe;
int ret;
int alen;
__u8 *command;
__u8 *result;
- int i;
command_port = serial->port[COMMAND_PORT];
@@ -285,22 +286,6 @@
serial->type->description,
hw_info->sw_major_rev, hw_info->sw_minor_rev);
- for (i = 0; i < serial->num_ports; i++) {
- port = serial->port[i];
-
- info = kmalloc(sizeof(struct whiteheat_private), GFP_KERNEL);
- if (info == NULL) {
- dev_err(&port->dev,
- "%s: Out of memory for port structures\n",
- serial->type->description);
- goto no_private;
- }
-
- info->mcr = 0;
-
- usb_set_serial_port_data(port, info);
- }
-
command_info = kmalloc(sizeof(struct whiteheat_command_private),
GFP_KERNEL);
if (command_info == NULL) {
@@ -333,16 +318,10 @@
"%s: please contact support@connecttech.com\n",
serial->type->description);
kfree(result);
+ kfree(command);
return -ENODEV;
no_command_private:
- for (i = serial->num_ports - 1; i >= 0; i--) {
- port = serial->port[i];
- info = usb_get_serial_port_data(port);
- kfree(info);
-no_private:
- ;
- }
kfree(result);
no_result_buffer:
kfree(command);
@@ -350,21 +329,36 @@
return -ENOMEM;
}
-
static void whiteheat_release(struct usb_serial *serial)
{
struct usb_serial_port *command_port;
- struct whiteheat_private *info;
- int i;
/* free up our private data for our command port */
command_port = serial->port[COMMAND_PORT];
kfree(usb_get_serial_port_data(command_port));
+}
- for (i = 0; i < serial->num_ports; i++) {
- info = usb_get_serial_port_data(serial->port[i]);
- kfree(info);
- }
+static int whiteheat_port_probe(struct usb_serial_port *port)
+{
+ struct whiteheat_private *info;
+
+ info = kzalloc(sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ usb_set_serial_port_data(port, info);
+
+ return 0;
+}
+
+static int whiteheat_port_remove(struct usb_serial_port *port)
+{
+ struct whiteheat_private *info;
+
+ info = usb_get_serial_port_data(port);
+ kfree(info);
+
+ return 0;
}
static int whiteheat_open(struct tty_struct *tty, struct usb_serial_port *port)
diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
index a3d5436..92f35ab 100644
--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -186,6 +186,12 @@
/* Some devices don't handle VPD pages correctly */
sdev->skip_vpd_pages = 1;
+ /* Do not attempt to use REPORT SUPPORTED OPERATION CODES */
+ sdev->no_report_opcodes = 1;
+
+ /* Do not attempt to use WRITE SAME */
+ sdev->no_write_same = 1;
+
/* Some disks return the total number of blocks in response
* to READ CAPACITY rather than the highest block number.
* If this device makes that mistake, tell the sd driver. */
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 779cd95..d305a5a 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -1004,6 +1004,12 @@
USB_SC_8070, USB_PR_CB, NULL,
US_FL_NEED_OVERRIDE | US_FL_FIX_INQUIRY ),
+/* Submitted by Oleksandr Chumachenko <ledest@gmail.com> */
+UNUSUAL_DEV( 0x07cf, 0x1167, 0x0100, 0x0100,
+ "Casio",
+ "EX-N1 DigitalCamera",
+ USB_SC_8070, USB_PR_DEVICE, NULL, 0),
+
/* Submitted by Hartmut Wahl <hwahl@hwahl.de>*/
UNUSUAL_DEV( 0x0839, 0x000a, 0x0001, 0x0001,
"Samsung",
diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c
index 072cbba..7f93f34 100644
--- a/drivers/vhost/net.c
+++ b/drivers/vhost/net.c
@@ -379,7 +379,8 @@
.hdr.gso_type = VIRTIO_NET_HDR_GSO_NONE
};
size_t total_len = 0;
- int err, headcount, mergeable;
+ int err, mergeable;
+ s16 headcount;
size_t vhost_hlen, sock_hlen;
size_t vhost_len, sock_len;
/* TODO: check that we are running from vhost_worker? */
diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index c101697..765a945 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -60,7 +60,8 @@
The LTV350QV panel is present on all ATSTK1000 boards.
config LCD_ILI9320
- tristate
+ tristate "ILI Technology ILI9320 controller support"
+ depends on SPI
help
If you have a panel based on the ILI9320 controller chip
then say y to include a power driver for it.
diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c
index cf2688d..e501dbc 100644
--- a/drivers/video/imxfb.c
+++ b/drivers/video/imxfb.c
@@ -33,7 +33,6 @@
#include <linux/math64.h>
#include <linux/platform_data/video-imxfb.h>
-#include <mach/hardware.h>
/*
* Complain if VAR is out of range.
@@ -53,8 +52,8 @@
#define LCDC_SIZE 0x04
#define SIZE_XMAX(x) ((((x) >> 4) & 0x3f) << 20)
-#define YMAX_MASK (cpu_is_mx1() ? 0x1ff : 0x3ff)
-#define SIZE_YMAX(y) ((y) & YMAX_MASK)
+#define YMAX_MASK_IMX1 0x1ff
+#define YMAX_MASK_IMX21 0x3ff
#define LCDC_VPW 0x08
#define VPW_VPW(x) ((x) & 0x3ff)
@@ -128,12 +127,18 @@
struct fb_bitfield transp;
};
+enum imxfb_type {
+ IMX1_FB,
+ IMX21_FB,
+};
+
struct imxfb_info {
struct platform_device *pdev;
void __iomem *regs;
struct clk *clk_ipg;
struct clk *clk_ahb;
struct clk *clk_per;
+ enum imxfb_type devtype;
/*
* These are the addresses we mapped
@@ -168,6 +173,24 @@
void (*backlight_power)(int);
};
+static struct platform_device_id imxfb_devtype[] = {
+ {
+ .name = "imx1-fb",
+ .driver_data = IMX1_FB,
+ }, {
+ .name = "imx21-fb",
+ .driver_data = IMX21_FB,
+ }, {
+ /* sentinel */
+ }
+};
+MODULE_DEVICE_TABLE(platform, imxfb_devtype);
+
+static inline int is_imx1_fb(struct imxfb_info *fbi)
+{
+ return fbi->devtype == IMX1_FB;
+}
+
#define IMX_NAME "IMX"
/*
@@ -366,7 +389,7 @@
break;
case 16:
default:
- if (cpu_is_mx1())
+ if (is_imx1_fb(fbi))
pcr |= PCR_BPIX_12;
else
pcr |= PCR_BPIX_16;
@@ -596,6 +619,7 @@
static int imxfb_activate_var(struct fb_var_screeninfo *var, struct fb_info *info)
{
struct imxfb_info *fbi = info->par;
+ u32 ymax_mask = is_imx1_fb(fbi) ? YMAX_MASK_IMX1 : YMAX_MASK_IMX21;
pr_debug("var: xres=%d hslen=%d lm=%d rm=%d\n",
var->xres, var->hsync_len,
@@ -617,7 +641,7 @@
if (var->right_margin > 255)
printk(KERN_ERR "%s: invalid right_margin %d\n",
info->fix.id, var->right_margin);
- if (var->yres < 1 || var->yres > YMAX_MASK)
+ if (var->yres < 1 || var->yres > ymax_mask)
printk(KERN_ERR "%s: invalid yres %d\n",
info->fix.id, var->yres);
if (var->vsync_len > 100)
@@ -645,7 +669,7 @@
VCR_V_WAIT_2(var->upper_margin),
fbi->regs + LCDC_VCR);
- writel(SIZE_XMAX(var->xres) | SIZE_YMAX(var->yres),
+ writel(SIZE_XMAX(var->xres) | (var->yres & ymax_mask),
fbi->regs + LCDC_SIZE);
writel(fbi->pcr, fbi->regs + LCDC_PCR);
@@ -765,6 +789,7 @@
return -ENOMEM;
fbi = info->par;
+ fbi->devtype = pdev->id_entry->driver_data;
if (!fb_mode)
fb_mode = pdata->mode[0].mode.name;
@@ -939,6 +964,7 @@
.driver = {
.name = DRIVER_NAME,
},
+ .id_table = imxfb_devtype,
};
static int imxfb_setup(void)
diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c
index ce1d452..7368872 100644
--- a/drivers/video/mx3fb.c
+++ b/drivers/video/mx3fb.c
@@ -26,10 +26,9 @@
#include <linux/console.h>
#include <linux/clk.h>
#include <linux/mutex.h>
+#include <linux/dma/ipu-dma.h>
#include <linux/platform_data/dma-imx.h>
-#include <mach/hardware.h>
-#include <mach/ipu.h>
#include <linux/platform_data/video-mx3fb.h>
#include <asm/io.h>
diff --git a/drivers/video/omap/lcd_inn1510.c b/drivers/video/omap/lcd_inn1510.c
index b38b1dd..2ee4232 100644
--- a/drivers/video/omap/lcd_inn1510.c
+++ b/drivers/video/omap/lcd_inn1510.c
@@ -23,7 +23,8 @@
#include <linux/platform_device.h>
#include <linux/io.h>
-#include <plat/fpga.h>
+#include <mach/hardware.h>
+
#include "omapfb.h"
static int innovator1510_panel_init(struct lcd_panel *panel,
@@ -38,13 +39,13 @@
static int innovator1510_panel_enable(struct lcd_panel *panel)
{
- fpga_write(0x7, OMAP1510_FPGA_LCD_PANEL_CONTROL);
+ __raw_writeb(0x7, OMAP1510_FPGA_LCD_PANEL_CONTROL);
return 0;
}
static void innovator1510_panel_disable(struct lcd_panel *panel)
{
- fpga_write(0x0, OMAP1510_FPGA_LCD_PANEL_CONTROL);
+ __raw_writeb(0x0, OMAP1510_FPGA_LCD_PANEL_CONTROL);
}
static unsigned long innovator1510_panel_get_caps(struct lcd_panel *panel)
diff --git a/drivers/video/omap/lcdc.c b/drivers/video/omap/lcdc.c
index 7767338..c39d6e4 100644
--- a/drivers/video/omap/lcdc.c
+++ b/drivers/video/omap/lcdc.c
@@ -31,7 +31,7 @@
#include <linux/gfp.h>
#include <mach/lcdc.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
#include <asm/mach-types.h>
diff --git a/drivers/video/omap/omapfb_main.c b/drivers/video/omap/omapfb_main.c
index 4351c43..1b5ee8e 100644
--- a/drivers/video/omap/omapfb_main.c
+++ b/drivers/video/omap/omapfb_main.c
@@ -30,7 +30,7 @@
#include <linux/uaccess.h>
#include <linux/module.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
#include "omapfb.h"
#include "lcdc.h"
diff --git a/drivers/video/omap/sossi.c b/drivers/video/omap/sossi.c
index f79c137..c510a44 100644
--- a/drivers/video/omap/sossi.c
+++ b/drivers/video/omap/sossi.c
@@ -25,7 +25,7 @@
#include <linux/io.h>
#include <linux/interrupt.h>
-#include <plat/dma.h>
+#include <plat-omap/dma-omap.h>
#include "omapfb.h"
#include "lcdc.h"
diff --git a/drivers/video/omap2/dss/core.c b/drivers/video/omap2/dss/core.c
index b2af72d..d94ef9e 100644
--- a/drivers/video/omap2/dss/core.c
+++ b/drivers/video/omap2/dss/core.c
@@ -237,7 +237,7 @@
core.pdev = pdev;
- dss_features_init();
+ dss_features_init(pdata->version);
dss_apply_init();
diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index b43477a..a5ab354 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -37,8 +37,6 @@
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
-#include <plat/cpu.h>
-
#include <video/omapdss.h>
#include "dss.h"
@@ -4042,29 +4040,44 @@
.gfx_fifo_workaround = true,
};
-static int __init dispc_init_features(struct device *dev)
+static int __init dispc_init_features(struct platform_device *pdev)
{
+ struct omap_dss_board_info *pdata = pdev->dev.platform_data;
const struct dispc_features *src;
struct dispc_features *dst;
- dst = devm_kzalloc(dev, sizeof(*dst), GFP_KERNEL);
+ dst = devm_kzalloc(&pdev->dev, sizeof(*dst), GFP_KERNEL);
if (!dst) {
- dev_err(dev, "Failed to allocate DISPC Features\n");
+ dev_err(&pdev->dev, "Failed to allocate DISPC Features\n");
return -ENOMEM;
}
- if (cpu_is_omap24xx()) {
+ switch (pdata->version) {
+ case OMAPDSS_VER_OMAP24xx:
src = &omap24xx_dispc_feats;
- } else if (cpu_is_omap34xx()) {
- if (omap_rev() < OMAP3430_REV_ES3_0)
- src = &omap34xx_rev1_0_dispc_feats;
- else
- src = &omap34xx_rev3_0_dispc_feats;
- } else if (cpu_is_omap44xx()) {
+ break;
+
+ case OMAPDSS_VER_OMAP34xx_ES1:
+ src = &omap34xx_rev1_0_dispc_feats;
+ break;
+
+ case OMAPDSS_VER_OMAP34xx_ES3:
+ case OMAPDSS_VER_OMAP3630:
+ case OMAPDSS_VER_AM35xx:
+ src = &omap34xx_rev3_0_dispc_feats;
+ break;
+
+ case OMAPDSS_VER_OMAP4430_ES1:
+ case OMAPDSS_VER_OMAP4430_ES2:
+ case OMAPDSS_VER_OMAP4:
src = &omap44xx_dispc_feats;
- } else if (soc_is_omap54xx()) {
+ break;
+
+ case OMAPDSS_VER_OMAP5:
src = &omap44xx_dispc_feats;
- } else {
+ break;
+
+ default:
return -ENODEV;
}
@@ -4084,7 +4097,7 @@
dispc.pdev = pdev;
- r = dispc_init_features(&dispc.pdev->dev);
+ r = dispc_init_features(dispc.pdev);
if (r)
return r;
diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index d64ac38..bee9284 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -365,11 +365,20 @@
struct omap_dss_output *out;
enum omap_dss_output_id id;
- id = module == 0 ? OMAP_DSS_OUTPUT_DSI1 : OMAP_DSS_OUTPUT_DSI2;
+ switch (module) {
+ case 0:
+ id = OMAP_DSS_OUTPUT_DSI1;
+ break;
+ case 1:
+ id = OMAP_DSS_OUTPUT_DSI2;
+ break;
+ default:
+ return NULL;
+ }
out = omap_dss_get_output(id);
- return out->pdev;
+ return out ? out->pdev : NULL;
}
static inline void dsi_write_reg(struct platform_device *dsidev,
diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/omap2/dss/dss.c
index 2ab1c3e..602102c 100644
--- a/drivers/video/omap2/dss/dss.c
+++ b/drivers/video/omap2/dss/dss.c
@@ -35,8 +35,6 @@
#include <video/omapdss.h>
-#include <plat/cpu.h>
-
#include "dss.h"
#include "dss_features.h"
@@ -697,11 +695,15 @@
dss.dss_clk = clk;
- clk = clk_get(NULL, dss.feat->clk_name);
- if (IS_ERR(clk)) {
- DSSERR("Failed to get %s\n", dss.feat->clk_name);
- r = PTR_ERR(clk);
- goto err;
+ if (dss.feat->clk_name) {
+ clk = clk_get(NULL, dss.feat->clk_name);
+ if (IS_ERR(clk)) {
+ DSSERR("Failed to get %s\n", dss.feat->clk_name);
+ r = PTR_ERR(clk);
+ goto err;
+ }
+ } else {
+ clk = NULL;
}
dss.dpll4_m4_ck = clk;
@@ -792,29 +794,46 @@
.dpi_select_source = &dss_dpi_select_source_omap5,
};
-static int __init dss_init_features(struct device *dev)
+static int __init dss_init_features(struct platform_device *pdev)
{
+ struct omap_dss_board_info *pdata = pdev->dev.platform_data;
const struct dss_features *src;
struct dss_features *dst;
- dst = devm_kzalloc(dev, sizeof(*dst), GFP_KERNEL);
+ dst = devm_kzalloc(&pdev->dev, sizeof(*dst), GFP_KERNEL);
if (!dst) {
- dev_err(dev, "Failed to allocate local DSS Features\n");
+ dev_err(&pdev->dev, "Failed to allocate local DSS Features\n");
return -ENOMEM;
}
- if (cpu_is_omap24xx())
+ switch (pdata->version) {
+ case OMAPDSS_VER_OMAP24xx:
src = &omap24xx_dss_feats;
- else if (cpu_is_omap34xx())
+ break;
+
+ case OMAPDSS_VER_OMAP34xx_ES1:
+ case OMAPDSS_VER_OMAP34xx_ES3:
+ case OMAPDSS_VER_AM35xx:
src = &omap34xx_dss_feats;
- else if (cpu_is_omap3630())
+ break;
+
+ case OMAPDSS_VER_OMAP3630:
src = &omap3630_dss_feats;
- else if (cpu_is_omap44xx())
+ break;
+
+ case OMAPDSS_VER_OMAP4430_ES1:
+ case OMAPDSS_VER_OMAP4430_ES2:
+ case OMAPDSS_VER_OMAP4:
src = &omap44xx_dss_feats;
- else if (soc_is_omap54xx())
+ break;
+
+ case OMAPDSS_VER_OMAP5:
src = &omap54xx_dss_feats;
- else
+ break;
+
+ default:
return -ENODEV;
+ }
memcpy(dst, src, sizeof(*dst));
dss.feat = dst;
@@ -831,7 +850,7 @@
dss.pdev = pdev;
- r = dss_init_features(&dss.pdev->dev);
+ r = dss_init_features(dss.pdev);
if (r)
return r;
diff --git a/drivers/video/omap2/dss/dss_features.c b/drivers/video/omap2/dss/dss_features.c
index acbc1e1..3e8287c 100644
--- a/drivers/video/omap2/dss/dss_features.c
+++ b/drivers/video/omap2/dss/dss_features.c
@@ -23,7 +23,6 @@
#include <linux/slab.h>
#include <video/omapdss.h>
-#include <plat/cpu.h>
#include "dss.h"
#include "dss_features.h"
@@ -825,10 +824,20 @@
};
-void dss_init_hdmi_ip_ops(struct hdmi_ip_data *ip_data)
+void dss_init_hdmi_ip_ops(struct hdmi_ip_data *ip_data,
+ enum omapdss_version version)
{
- if (cpu_is_omap44xx())
+ switch (version) {
+ case OMAPDSS_VER_OMAP4430_ES1:
+ case OMAPDSS_VER_OMAP4430_ES2:
+ case OMAPDSS_VER_OMAP4:
ip_data->ops = &omap4_hdmi_functions;
+ break;
+ default:
+ ip_data->ops = NULL;
+ }
+
+ WARN_ON(ip_data->ops == NULL);
}
#endif
@@ -929,29 +938,44 @@
return omap_current_dss_features->supported_rotation_types & rot_type;
}
-void dss_features_init(void)
+void dss_features_init(enum omapdss_version version)
{
- if (cpu_is_omap24xx())
+ switch (version) {
+ case OMAPDSS_VER_OMAP24xx:
omap_current_dss_features = &omap2_dss_features;
- else if (cpu_is_omap3630())
+ break;
+
+ case OMAPDSS_VER_OMAP34xx_ES1:
+ case OMAPDSS_VER_OMAP34xx_ES3:
+ omap_current_dss_features = &omap3430_dss_features;
+ break;
+
+ case OMAPDSS_VER_OMAP3630:
omap_current_dss_features = &omap3630_dss_features;
- else if (cpu_is_omap34xx()) {
- if (soc_is_am35xx()) {
- omap_current_dss_features = &am35xx_dss_features;
- } else {
- omap_current_dss_features = &omap3430_dss_features;
- }
- }
- else if (omap_rev() == OMAP4430_REV_ES1_0)
+ break;
+
+ case OMAPDSS_VER_OMAP4430_ES1:
omap_current_dss_features = &omap4430_es1_0_dss_features;
- else if (omap_rev() == OMAP4430_REV_ES2_0 ||
- omap_rev() == OMAP4430_REV_ES2_1 ||
- omap_rev() == OMAP4430_REV_ES2_2)
+ break;
+
+ case OMAPDSS_VER_OMAP4430_ES2:
omap_current_dss_features = &omap4430_es2_0_1_2_dss_features;
- else if (cpu_is_omap44xx())
+ break;
+
+ case OMAPDSS_VER_OMAP4:
omap_current_dss_features = &omap4_dss_features;
- else if (soc_is_omap54xx())
+ break;
+
+ case OMAPDSS_VER_OMAP5:
omap_current_dss_features = &omap5_dss_features;
- else
+ break;
+
+ case OMAPDSS_VER_AM35xx:
+ omap_current_dss_features = &am35xx_dss_features;
+ break;
+
+ default:
DSSWARN("Unsupported OMAP version");
+ break;
+ }
}
diff --git a/drivers/video/omap2/dss/dss_features.h b/drivers/video/omap2/dss/dss_features.h
index 9218113..fc492ef 100644
--- a/drivers/video/omap2/dss/dss_features.h
+++ b/drivers/video/omap2/dss/dss_features.h
@@ -123,8 +123,9 @@
bool dss_has_feature(enum dss_feat_id id);
void dss_feat_get_reg_field(enum dss_feat_reg_field id, u8 *start, u8 *end);
-void dss_features_init(void);
+void dss_features_init(enum omapdss_version version);
#if defined(CONFIG_OMAP4_DSS_HDMI)
-void dss_init_hdmi_ip_ops(struct hdmi_ip_data *ip_data);
+void dss_init_hdmi_ip_ops(struct hdmi_ip_data *ip_data,
+ enum omapdss_version version);
#endif
#endif
diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c
index a48a7dd..0d6d721 100644
--- a/drivers/video/omap2/dss/hdmi.c
+++ b/drivers/video/omap2/dss/hdmi.c
@@ -323,6 +323,7 @@
static int __init hdmi_init_display(struct omap_dss_device *dssdev)
{
+ struct omap_dss_board_info *pdata = hdmi.pdev->dev.platform_data;
int r;
struct gpio gpios[] = {
@@ -333,7 +334,7 @@
DSSDBG("init_display\n");
- dss_init_hdmi_ip_ops(&hdmi.ip_data);
+ dss_init_hdmi_ip_ops(&hdmi.ip_data, pdata->version);
if (hdmi.vdda_hdmi_dac_reg == NULL) {
struct regulator *reg;
@@ -644,8 +645,10 @@
{
mutex_lock(&hdmi.lock);
- if (hdmi_runtime_get())
+ if (hdmi_runtime_get()) {
+ mutex_unlock(&hdmi.lock);
return;
+ }
hdmi.ip_data.ops->dump_wrapper(&hdmi.ip_data, s);
hdmi.ip_data.ops->dump_pll(&hdmi.ip_data, s);
diff --git a/drivers/video/omap2/omapfb/omapfb-ioctl.c b/drivers/video/omap2/omapfb/omapfb-ioctl.c
index 606b89f..532a31b 100644
--- a/drivers/video/omap2/omapfb/omapfb-ioctl.c
+++ b/drivers/video/omap2/omapfb/omapfb-ioctl.c
@@ -30,7 +30,7 @@
#include <linux/export.h>
#include <video/omapdss.h>
-#include <plat/vrfb.h>
+#include <video/omapvrfb.h>
#include <plat/vram.h>
#include "omapfb.h"
@@ -787,7 +787,7 @@
case OMAPFB_WAITFORVSYNC:
DBG("ioctl WAITFORVSYNC\n");
- if (!display && !display->output && !display->output->manager) {
+ if (!display || !display->output || !display->output->manager) {
r = -EINVAL;
break;
}
diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/omap2/omapfb/omapfb-main.c
index 16db158..bc225e4 100644
--- a/drivers/video/omap2/omapfb/omapfb-main.c
+++ b/drivers/video/omap2/omapfb/omapfb-main.c
@@ -31,9 +31,8 @@
#include <linux/omapfb.h>
#include <video/omapdss.h>
-#include <plat/cpu.h>
#include <plat/vram.h>
-#include <plat/vrfb.h>
+#include <video/omapvrfb.h>
#include "omapfb.h"
@@ -2396,10 +2395,7 @@
goto err0;
}
- /* TODO : Replace cpu check with omap_has_vrfb once HAS_FEATURE
- * available for OMAP2 and OMAP3
- */
- if (def_vrfb && !cpu_is_omap24xx() && !cpu_is_omap34xx()) {
+ if (def_vrfb && !omap_vrfb_supported()) {
def_vrfb = 0;
dev_warn(&pdev->dev, "VRFB is not supported on this hardware, "
"ignoring the module parameter vrfb=y\n");
diff --git a/drivers/video/omap2/omapfb/omapfb-sysfs.c b/drivers/video/omap2/omapfb/omapfb-sysfs.c
index e8d8cc7..17aa174 100644
--- a/drivers/video/omap2/omapfb/omapfb-sysfs.c
+++ b/drivers/video/omap2/omapfb/omapfb-sysfs.c
@@ -30,7 +30,7 @@
#include <linux/omapfb.h>
#include <video/omapdss.h>
-#include <plat/vrfb.h>
+#include <video/omapvrfb.h>
#include "omapfb.h"
diff --git a/drivers/video/omap2/vrfb.c b/drivers/video/omap2/vrfb.c
index 7e99022..5d8fdac 100644
--- a/drivers/video/omap2/vrfb.c
+++ b/drivers/video/omap2/vrfb.c
@@ -26,9 +26,9 @@
#include <linux/io.h>
#include <linux/bitops.h>
#include <linux/mutex.h>
+#include <linux/platform_device.h>
-#include <plat/vrfb.h>
-#include <plat/sdrc.h>
+#include <video/omapvrfb.h>
#ifdef DEBUG
#define DBG(format, ...) pr_debug("VRFB: " format, ## __VA_ARGS__)
@@ -36,10 +36,10 @@
#define DBG(format, ...)
#endif
-#define SMS_ROT_VIRT_BASE(context, rot) \
- (((context >= 4) ? 0xD0000000 : 0x70000000) \
- + (0x4000000 * (context)) \
- + (0x1000000 * (rot)))
+#define SMS_ROT_CONTROL(context) (0x0 + 0x10 * context)
+#define SMS_ROT_SIZE(context) (0x4 + 0x10 * context)
+#define SMS_ROT_PHYSICAL_BA(context) (0x8 + 0x10 * context)
+#define SMS_ROT_VIRT_BASE(rot) (0x1000000 * (rot))
#define OMAP_VRFB_SIZE (2048 * 2048 * 4)
@@ -53,10 +53,16 @@
#define SMS_PW_OFFSET 4
#define SMS_PS_OFFSET 0
-#define VRFB_NUM_CTXS 12
/* bitmap of reserved contexts */
static unsigned long ctx_map;
+struct vrfb_ctx {
+ u32 base;
+ u32 physical_ba;
+ u32 control;
+ u32 size;
+};
+
static DEFINE_MUTEX(ctx_lock);
/*
@@ -65,17 +71,34 @@
* we don't need locking, since no drivers will run until after the wake-up
* has finished.
*/
-static struct {
- u32 physical_ba;
- u32 control;
- u32 size;
-} vrfb_hw_context[VRFB_NUM_CTXS];
+
+static void __iomem *vrfb_base;
+
+static int num_ctxs;
+static struct vrfb_ctx *ctxs;
+
+static bool vrfb_loaded;
+
+static void omap2_sms_write_rot_control(u32 val, unsigned ctx)
+{
+ __raw_writel(val, vrfb_base + SMS_ROT_CONTROL(ctx));
+}
+
+static void omap2_sms_write_rot_size(u32 val, unsigned ctx)
+{
+ __raw_writel(val, vrfb_base + SMS_ROT_SIZE(ctx));
+}
+
+static void omap2_sms_write_rot_physical_ba(u32 val, unsigned ctx)
+{
+ __raw_writel(val, vrfb_base + SMS_ROT_PHYSICAL_BA(ctx));
+}
static inline void restore_hw_context(int ctx)
{
- omap2_sms_write_rot_control(vrfb_hw_context[ctx].control, ctx);
- omap2_sms_write_rot_size(vrfb_hw_context[ctx].size, ctx);
- omap2_sms_write_rot_physical_ba(vrfb_hw_context[ctx].physical_ba, ctx);
+ omap2_sms_write_rot_control(ctxs[ctx].control, ctx);
+ omap2_sms_write_rot_size(ctxs[ctx].size, ctx);
+ omap2_sms_write_rot_physical_ba(ctxs[ctx].physical_ba, ctx);
}
static u32 get_image_width_roundup(u16 width, u8 bytespp)
@@ -196,9 +219,9 @@
control |= VRFB_PAGE_WIDTH_EXP << SMS_PW_OFFSET;
control |= VRFB_PAGE_HEIGHT_EXP << SMS_PH_OFFSET;
- vrfb_hw_context[ctx].physical_ba = paddr;
- vrfb_hw_context[ctx].size = size;
- vrfb_hw_context[ctx].control = control;
+ ctxs[ctx].physical_ba = paddr;
+ ctxs[ctx].size = size;
+ ctxs[ctx].control = control;
omap2_sms_write_rot_physical_ba(paddr, ctx);
omap2_sms_write_rot_size(size, ctx);
@@ -274,11 +297,11 @@
mutex_lock(&ctx_lock);
- for (ctx = 0; ctx < VRFB_NUM_CTXS; ++ctx)
+ for (ctx = 0; ctx < num_ctxs; ++ctx)
if ((ctx_map & (1 << ctx)) == 0)
break;
- if (ctx == VRFB_NUM_CTXS) {
+ if (ctx == num_ctxs) {
pr_err("vrfb: no free contexts\n");
r = -EBUSY;
goto out;
@@ -293,7 +316,7 @@
vrfb->context = ctx;
for (rot = 0; rot < 4; ++rot) {
- paddr = SMS_ROT_VIRT_BASE(ctx, rot);
+ paddr = ctxs[ctx].base + SMS_ROT_VIRT_BASE(rot);
if (!request_mem_region(paddr, OMAP_VRFB_SIZE, "vrfb")) {
pr_err("vrfb: failed to reserve VRFB "
"area for ctx %d, rotation %d\n",
@@ -314,3 +337,80 @@
return r;
}
EXPORT_SYMBOL(omap_vrfb_request_ctx);
+
+bool omap_vrfb_supported(void)
+{
+ return vrfb_loaded;
+}
+EXPORT_SYMBOL(omap_vrfb_supported);
+
+static int __init vrfb_probe(struct platform_device *pdev)
+{
+ struct resource *mem;
+ int i;
+
+ /* first resource is the register res, the rest are vrfb contexts */
+
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!mem) {
+ dev_err(&pdev->dev, "can't get vrfb base address\n");
+ return -EINVAL;
+ }
+
+ vrfb_base = devm_request_and_ioremap(&pdev->dev, mem);
+ if (!vrfb_base) {
+ dev_err(&pdev->dev, "can't ioremap vrfb memory\n");
+ return -ENOMEM;
+ }
+
+ num_ctxs = pdev->num_resources - 1;
+
+ ctxs = devm_kzalloc(&pdev->dev,
+ sizeof(struct vrfb_ctx) * num_ctxs,
+ GFP_KERNEL);
+
+ if (!ctxs)
+ return -ENOMEM;
+
+ for (i = 0; i < num_ctxs; ++i) {
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 1 + i);
+ if (!mem) {
+ dev_err(&pdev->dev, "can't get vrfb ctx %d address\n",
+ i);
+ return -EINVAL;
+ }
+
+ ctxs[i].base = mem->start;
+ }
+
+ vrfb_loaded = true;
+
+ return 0;
+}
+
+static void __exit vrfb_remove(struct platform_device *pdev)
+{
+ vrfb_loaded = false;
+}
+
+static struct platform_driver vrfb_driver = {
+ .driver.name = "omapvrfb",
+ .remove = __exit_p(vrfb_remove),
+};
+
+static int __init vrfb_init(void)
+{
+ return platform_driver_probe(&vrfb_driver, &vrfb_probe);
+}
+
+static void __exit vrfb_exit(void)
+{
+ platform_driver_unregister(&vrfb_driver);
+}
+
+module_init(vrfb_init);
+module_exit(vrfb_exit);
+
+MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
+MODULE_DESCRIPTION("OMAP VRFB");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/video/xen-fbfront.c b/drivers/video/xen-fbfront.c
index b7f5173..917bb56 100644
--- a/drivers/video/xen-fbfront.c
+++ b/drivers/video/xen-fbfront.c
@@ -641,7 +641,6 @@
case XenbusStateReconfiguring:
case XenbusStateReconfigured:
case XenbusStateUnknown:
- case XenbusStateClosed:
break;
case XenbusStateInitWait:
@@ -670,6 +669,10 @@
info->feature_resize = val;
break;
+ case XenbusStateClosed:
+ if (dev->state == XenbusStateClosed)
+ break;
+ /* Missed the backend's CLOSING state -- fallthrough */
case XenbusStateClosing:
xenbus_frontend_closed(dev);
break;
diff --git a/drivers/virtio/virtio.c b/drivers/virtio/virtio.c
index 1e8659c..809b0de 100644
--- a/drivers/virtio/virtio.c
+++ b/drivers/virtio/virtio.c
@@ -225,8 +225,10 @@
void unregister_virtio_device(struct virtio_device *dev)
{
+ int index = dev->index; /* save for after device release */
+
device_unregister(&dev->dev);
- ida_simple_remove(&virtio_index_ida, dev->index);
+ ida_simple_remove(&virtio_index_ida, index);
}
EXPORT_SYMBOL_GPL(unregister_virtio_device);
diff --git a/drivers/watchdog/imx2_wdt.c b/drivers/watchdog/imx2_wdt.c
index bcfab2b..9a45d029 100644
--- a/drivers/watchdog/imx2_wdt.c
+++ b/drivers/watchdog/imx2_wdt.c
@@ -33,7 +33,6 @@
#include <linux/uaccess.h>
#include <linux/timer.h>
#include <linux/jiffies.h>
-#include <mach/hardware.h>
#define DRIVER_NAME "imx2-wdt"
diff --git a/drivers/watchdog/omap_wdt.c b/drivers/watchdog/omap_wdt.c
index f5db18db..477a1d4 100644
--- a/drivers/watchdog/omap_wdt.c
+++ b/drivers/watchdog/omap_wdt.c
@@ -46,8 +46,8 @@
#include <linux/slab.h>
#include <linux/pm_runtime.h>
#include <mach/hardware.h>
-#include <plat/cpu.h>
-#include <plat/prcm.h>
+
+#include <linux/platform_data/omap-wd-timer.h>
#include "omap_wdt.h"
@@ -202,8 +202,10 @@
static long omap_wdt_ioctl(struct file *file, unsigned int cmd,
unsigned long arg)
{
+ struct omap_wd_timer_platform_data *pdata;
struct omap_wdt_dev *wdev;
- int new_margin;
+ u32 rs;
+ int new_margin, bs;
static const struct watchdog_info ident = {
.identity = "OMAP Watchdog",
.options = WDIOF_SETTIMEOUT,
@@ -211,6 +213,7 @@
};
wdev = file->private_data;
+ pdata = wdev->dev->platform_data;
switch (cmd) {
case WDIOC_GETSUPPORT:
@@ -219,17 +222,12 @@
case WDIOC_GETSTATUS:
return put_user(0, (int __user *)arg);
case WDIOC_GETBOOTSTATUS:
-#ifdef CONFIG_ARCH_OMAP1
- if (cpu_is_omap16xx())
- return put_user(__raw_readw(ARM_SYSST),
- (int __user *)arg);
-#endif
-#ifdef CONFIG_ARCH_OMAP2PLUS
- if (cpu_is_omap24xx())
- return put_user(omap_prcm_get_reset_sources(),
- (int __user *)arg);
-#endif
- return put_user(0, (int __user *)arg);
+ if (!pdata || !pdata->read_reset_sources)
+ return put_user(0, (int __user *)arg);
+ rs = pdata->read_reset_sources();
+ bs = (rs & (1 << OMAP_MPU_WD_RST_SRC_ID_SHIFT)) ?
+ WDIOF_CARDRESET : 0;
+ return put_user(bs, (int __user *)arg);
case WDIOC_KEEPALIVE:
spin_lock(&wdt_lock);
omap_wdt_ping(wdev);
diff --git a/drivers/xen/Kconfig b/drivers/xen/Kconfig
index d4dffcd..126d8ce 100644
--- a/drivers/xen/Kconfig
+++ b/drivers/xen/Kconfig
@@ -3,6 +3,7 @@
config XEN_BALLOON
bool "Xen memory balloon driver"
+ depends on !ARM
default y
help
The balloon driver allows the Xen domain to request more memory from
@@ -145,6 +146,7 @@
config XEN_TMEM
bool
+ depends on !ARM
default y if (CLEANCACHE || FRONTSWAP)
help
Shim to interface in-kernel Transcendent Memory hooks
diff --git a/drivers/xen/Makefile b/drivers/xen/Makefile
index 0e863703..7435470 100644
--- a/drivers/xen/Makefile
+++ b/drivers/xen/Makefile
@@ -2,6 +2,7 @@
obj-y += manage.o balloon.o
obj-$(CONFIG_HOTPLUG_CPU) += cpu_hotplug.o
endif
+obj-$(CONFIG_X86) += fallback.o
obj-y += grant-table.o features.o events.o
obj-y += xenbus/
diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c
index 31ab82f..d6886d9 100644
--- a/drivers/xen/balloon.c
+++ b/drivers/xen/balloon.c
@@ -55,7 +55,6 @@
#include <asm/pgalloc.h>
#include <asm/pgtable.h>
#include <asm/tlb.h>
-#include <asm/e820.h>
#include <asm/xen/hypervisor.h>
#include <asm/xen/hypercall.h>
@@ -88,7 +87,7 @@
EXPORT_SYMBOL_GPL(balloon_stats);
/* We increase/decrease in batches which fit in a page */
-static unsigned long frame_list[PAGE_SIZE / sizeof(unsigned long)];
+static xen_pfn_t frame_list[PAGE_SIZE / sizeof(unsigned long)];
#ifdef CONFIG_HIGHMEM
#define inc_totalhigh_pages() (totalhigh_pages++)
diff --git a/drivers/xen/dbgp.c b/drivers/xen/dbgp.c
index 42569c7..f3ccc80 100644
--- a/drivers/xen/dbgp.c
+++ b/drivers/xen/dbgp.c
@@ -8,7 +8,9 @@
static int xen_dbgp_op(struct usb_hcd *hcd, int op)
{
+#ifdef CONFIG_PCI
const struct device *ctrlr = hcd_to_bus(hcd)->controller;
+#endif
struct physdev_dbgp_op dbgp;
if (!xen_initial_domain())
diff --git a/drivers/xen/events.c b/drivers/xen/events.c
index 59e10a1..0be4df3 100644
--- a/drivers/xen/events.c
+++ b/drivers/xen/events.c
@@ -115,7 +115,9 @@
#define PIRQ_SHAREABLE (1 << 1)
static int *evtchn_to_irq;
+#ifdef CONFIG_X86
static unsigned long *pirq_eoi_map;
+#endif
static bool (*pirq_needs_eoi)(unsigned irq);
static DEFINE_PER_CPU(unsigned long [NR_EVENT_CHANNELS/BITS_PER_LONG],
@@ -277,10 +279,12 @@
return ret;
}
+#ifdef CONFIG_X86
static bool pirq_check_eoi_map(unsigned irq)
{
return test_bit(pirq_from_irq(irq), pirq_eoi_map);
}
+#endif
static bool pirq_needs_eoi_flag(unsigned irq)
{
@@ -1391,10 +1395,10 @@
{
struct pt_regs *old_regs = set_irq_regs(regs);
+ irq_enter();
#ifdef CONFIG_X86
exit_idle();
#endif
- irq_enter();
__xen_evtchn_do_upcall();
diff --git a/drivers/xen/fallback.c b/drivers/xen/fallback.c
new file mode 100644
index 0000000..0ef7c4d
--- /dev/null
+++ b/drivers/xen/fallback.c
@@ -0,0 +1,80 @@
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/bug.h>
+#include <linux/export.h>
+#include <asm/hypervisor.h>
+#include <asm/xen/hypercall.h>
+
+int xen_event_channel_op_compat(int cmd, void *arg)
+{
+ struct evtchn_op op;
+ int rc;
+
+ op.cmd = cmd;
+ memcpy(&op.u, arg, sizeof(op.u));
+ rc = _hypercall1(int, event_channel_op_compat, &op);
+
+ switch (cmd) {
+ case EVTCHNOP_close:
+ case EVTCHNOP_send:
+ case EVTCHNOP_bind_vcpu:
+ case EVTCHNOP_unmask:
+ /* no output */
+ break;
+
+#define COPY_BACK(eop) \
+ case EVTCHNOP_##eop: \
+ memcpy(arg, &op.u.eop, sizeof(op.u.eop)); \
+ break
+
+ COPY_BACK(bind_interdomain);
+ COPY_BACK(bind_virq);
+ COPY_BACK(bind_pirq);
+ COPY_BACK(status);
+ COPY_BACK(alloc_unbound);
+ COPY_BACK(bind_ipi);
+#undef COPY_BACK
+
+ default:
+ WARN_ON(rc != -ENOSYS);
+ break;
+ }
+
+ return rc;
+}
+EXPORT_SYMBOL_GPL(xen_event_channel_op_compat);
+
+int HYPERVISOR_physdev_op_compat(int cmd, void *arg)
+{
+ struct physdev_op op;
+ int rc;
+
+ op.cmd = cmd;
+ memcpy(&op.u, arg, sizeof(op.u));
+ rc = _hypercall1(int, physdev_op_compat, &op);
+
+ switch (cmd) {
+ case PHYSDEVOP_IRQ_UNMASK_NOTIFY:
+ case PHYSDEVOP_set_iopl:
+ case PHYSDEVOP_set_iobitmap:
+ case PHYSDEVOP_apic_write:
+ /* no output */
+ break;
+
+#define COPY_BACK(pop, fld) \
+ case PHYSDEVOP_##pop: \
+ memcpy(arg, &op.u.fld, sizeof(op.u.fld)); \
+ break
+
+ COPY_BACK(irq_status_query, irq_status_query);
+ COPY_BACK(apic_read, apic_op);
+ COPY_BACK(ASSIGN_VECTOR, irq_op);
+#undef COPY_BACK
+
+ default:
+ WARN_ON(rc != -ENOSYS);
+ break;
+ }
+
+ return rc;
+}
diff --git a/drivers/xen/gntdev.c b/drivers/xen/gntdev.c
index 610bfc6be..2e22df2 100644
--- a/drivers/xen/gntdev.c
+++ b/drivers/xen/gntdev.c
@@ -105,6 +105,21 @@
#endif
}
+static void gntdev_free_map(struct grant_map *map)
+{
+ if (map == NULL)
+ return;
+
+ if (map->pages)
+ free_xenballooned_pages(map->count, map->pages);
+ kfree(map->pages);
+ kfree(map->grants);
+ kfree(map->map_ops);
+ kfree(map->unmap_ops);
+ kfree(map->kmap_ops);
+ kfree(map);
+}
+
static struct grant_map *gntdev_alloc_map(struct gntdev_priv *priv, int count)
{
struct grant_map *add;
@@ -142,12 +157,7 @@
return add;
err:
- kfree(add->pages);
- kfree(add->grants);
- kfree(add->map_ops);
- kfree(add->unmap_ops);
- kfree(add->kmap_ops);
- kfree(add);
+ gntdev_free_map(add);
return NULL;
}
@@ -198,17 +208,9 @@
evtchn_put(map->notify.event);
}
- if (map->pages) {
- if (!use_ptemod)
- unmap_grant_pages(map, 0, map->count);
-
- free_xenballooned_pages(map->count, map->pages);
- }
- kfree(map->pages);
- kfree(map->grants);
- kfree(map->map_ops);
- kfree(map->unmap_ops);
- kfree(map);
+ if (map->pages && !use_ptemod)
+ unmap_grant_pages(map, 0, map->count);
+ gntdev_free_map(map);
}
/* ------------------------------------------------------------------ */
diff --git a/drivers/xen/grant-table.c b/drivers/xen/grant-table.c
index b2b0a37..b91f14e 100644
--- a/drivers/xen/grant-table.c
+++ b/drivers/xen/grant-table.c
@@ -84,7 +84,7 @@
* nr_gframes is the number of frames to map grant table. Returning
* GNTST_okay means success and negative value means failure.
*/
- int (*map_frames)(unsigned long *frames, unsigned int nr_gframes);
+ int (*map_frames)(xen_pfn_t *frames, unsigned int nr_gframes);
/*
* Release a list of frames which are mapped in map_frames for grant
* entry status.
@@ -960,7 +960,7 @@
return (nr_grant_frames * GREFS_PER_GRANT_FRAME + SPP - 1) / SPP;
}
-static int gnttab_map_frames_v1(unsigned long *frames, unsigned int nr_gframes)
+static int gnttab_map_frames_v1(xen_pfn_t *frames, unsigned int nr_gframes)
{
int rc;
@@ -977,7 +977,7 @@
arch_gnttab_unmap(gnttab_shared.addr, nr_grant_frames);
}
-static int gnttab_map_frames_v2(unsigned long *frames, unsigned int nr_gframes)
+static int gnttab_map_frames_v2(xen_pfn_t *frames, unsigned int nr_gframes)
{
uint64_t *sframes;
unsigned int nr_sframes;
@@ -1029,7 +1029,7 @@
static int gnttab_map(unsigned int start_idx, unsigned int end_idx)
{
struct gnttab_setup_table setup;
- unsigned long *frames;
+ xen_pfn_t *frames;
unsigned int nr_gframes = end_idx + 1;
int rc;
diff --git a/drivers/xen/privcmd.c b/drivers/xen/privcmd.c
index 8adb9cc..71f5c45 100644
--- a/drivers/xen/privcmd.c
+++ b/drivers/xen/privcmd.c
@@ -361,13 +361,13 @@
down_write(&mm->mmap_sem);
vma = find_vma(mm, m.addr);
- ret = -EINVAL;
if (!vma ||
vma->vm_ops != &privcmd_vm_ops ||
(m.addr != vma->vm_start) ||
((m.addr + (nr_pages << PAGE_SHIFT)) != vma->vm_end) ||
!privcmd_enforce_singleshot_mapping(vma)) {
up_write(&mm->mmap_sem);
+ ret = -EINVAL;
goto out;
}
@@ -383,12 +383,16 @@
up_write(&mm->mmap_sem);
- if (state.global_error && (version == 1)) {
- /* Write back errors in second pass. */
- state.user_mfn = (xen_pfn_t *)m.arr;
- state.err = err_array;
- ret = traverse_pages(m.num, sizeof(xen_pfn_t),
- &pagelist, mmap_return_errors_v1, &state);
+ if (version == 1) {
+ if (state.global_error) {
+ /* Write back errors in second pass. */
+ state.user_mfn = (xen_pfn_t *)m.arr;
+ state.err = err_array;
+ ret = traverse_pages(m.num, sizeof(xen_pfn_t),
+ &pagelist, mmap_return_errors_v1, &state);
+ } else
+ ret = 0;
+
} else if (version == 2) {
ret = __copy_to_user(m.err, err_array, m.num * sizeof(int));
if (ret)
diff --git a/drivers/xen/sys-hypervisor.c b/drivers/xen/sys-hypervisor.c
index 5e5ad7e2..96453f8 100644
--- a/drivers/xen/sys-hypervisor.c
+++ b/drivers/xen/sys-hypervisor.c
@@ -11,6 +11,7 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/kobject.h>
+#include <linux/err.h>
#include <asm/xen/hypervisor.h>
#include <asm/xen/hypercall.h>
@@ -284,7 +285,8 @@
ret = HYPERVISOR_xen_version(XENVER_platform_parameters,
parms);
if (!ret)
- ret = sprintf(buffer, "%lx\n", parms->virt_start);
+ ret = sprintf(buffer, "%"PRI_xen_ulong"\n",
+ parms->virt_start);
kfree(parms);
}
diff --git a/drivers/xen/xen-pciback/vpci.c b/drivers/xen/xen-pciback/vpci.c
index 46d140b..0f478ac 100644
--- a/drivers/xen/xen-pciback/vpci.c
+++ b/drivers/xen/xen-pciback/vpci.c
@@ -89,9 +89,15 @@
mutex_lock(&vpci_dev->lock);
- /* Keep multi-function devices together on the virtual PCI bus */
- for (slot = 0; slot < PCI_SLOT_MAX; slot++) {
- if (!list_empty(&vpci_dev->dev_list[slot])) {
+ /*
+ * Keep multi-function devices together on the virtual PCI bus, except
+ * virtual functions.
+ */
+ if (!dev->is_virtfn) {
+ for (slot = 0; slot < PCI_SLOT_MAX; slot++) {
+ if (list_empty(&vpci_dev->dev_list[slot]))
+ continue;
+
t = list_entry(list_first(&vpci_dev->dev_list[slot]),
struct pci_dev_entry, list);
@@ -116,7 +122,7 @@
pci_name(dev), slot);
list_add_tail(&dev_entry->list,
&vpci_dev->dev_list[slot]);
- func = PCI_FUNC(dev->devfn);
+ func = dev->is_virtfn ? 0 : PCI_FUNC(dev->devfn);
goto unlock;
}
}
diff --git a/drivers/xen/xenbus/xenbus_dev_frontend.c b/drivers/xen/xenbus/xenbus_dev_frontend.c
index 89f7625..ac72702 100644
--- a/drivers/xen/xenbus/xenbus_dev_frontend.c
+++ b/drivers/xen/xenbus/xenbus_dev_frontend.c
@@ -458,7 +458,7 @@
goto out;
/* Can't write a xenbus message larger we can buffer */
- if ((len + u->len) > sizeof(u->u.buffer)) {
+ if (len > sizeof(u->u.buffer) - u->len) {
/* On error, dump existing buffer */
u->len = 0;
rc = -EINVAL;
diff --git a/drivers/xen/xenbus/xenbus_xs.c b/drivers/xen/xenbus/xenbus_xs.c
index f5dda83..acedeab 100644
--- a/drivers/xen/xenbus/xenbus_xs.c
+++ b/drivers/xen/xenbus/xenbus_xs.c
@@ -627,6 +627,7 @@
*/
static bool xen_strict_xenbus_quirk(void)
{
+#ifdef CONFIG_X86
uint32_t eax, ebx, ecx, edx, base;
base = xen_cpuid_base();
@@ -634,6 +635,7 @@
if ((eax >> 16) < 4)
return true;
+#endif
return false;
}
diff --git a/fs/bio.c b/fs/bio.c
index 9298c65..b96fc6c 100644
--- a/fs/bio.c
+++ b/fs/bio.c
@@ -75,6 +75,7 @@
unsigned int sz = sizeof(struct bio) + extra_size;
struct kmem_cache *slab = NULL;
struct bio_slab *bslab, *new_bio_slabs;
+ unsigned int new_bio_slab_max;
unsigned int i, entry = -1;
mutex_lock(&bio_slab_lock);
@@ -97,12 +98,13 @@
goto out_unlock;
if (bio_slab_nr == bio_slab_max && entry == -1) {
- bio_slab_max <<= 1;
+ new_bio_slab_max = bio_slab_max << 1;
new_bio_slabs = krealloc(bio_slabs,
- bio_slab_max * sizeof(struct bio_slab),
+ new_bio_slab_max * sizeof(struct bio_slab),
GFP_KERNEL);
if (!new_bio_slabs)
goto out_unlock;
+ bio_slab_max = new_bio_slab_max;
bio_slabs = new_bio_slabs;
}
if (entry == -1)
diff --git a/fs/block_dev.c b/fs/block_dev.c
index b3c1d3d..1a1e5e3 100644
--- a/fs/block_dev.c
+++ b/fs/block_dev.c
@@ -1661,6 +1661,39 @@
return ret;
}
+static ssize_t blkdev_splice_read(struct file *file, loff_t *ppos,
+ struct pipe_inode_info *pipe, size_t len,
+ unsigned int flags)
+{
+ ssize_t ret;
+ struct block_device *bdev = I_BDEV(file->f_mapping->host);
+
+ percpu_down_read(&bdev->bd_block_size_semaphore);
+
+ ret = generic_file_splice_read(file, ppos, pipe, len, flags);
+
+ percpu_up_read(&bdev->bd_block_size_semaphore);
+
+ return ret;
+}
+
+static ssize_t blkdev_splice_write(struct pipe_inode_info *pipe,
+ struct file *file, loff_t *ppos, size_t len,
+ unsigned int flags)
+{
+ ssize_t ret;
+ struct block_device *bdev = I_BDEV(file->f_mapping->host);
+
+ percpu_down_read(&bdev->bd_block_size_semaphore);
+
+ ret = generic_file_splice_write(pipe, file, ppos, len, flags);
+
+ percpu_up_read(&bdev->bd_block_size_semaphore);
+
+ return ret;
+}
+
+
/*
* Try to release a page associated with block device when the system
* is under memory pressure.
@@ -1699,8 +1732,8 @@
#ifdef CONFIG_COMPAT
.compat_ioctl = compat_blkdev_ioctl,
#endif
- .splice_read = generic_file_splice_read,
- .splice_write = generic_file_splice_write,
+ .splice_read = blkdev_splice_read,
+ .splice_write = blkdev_splice_write,
};
int ioctl_by_bdev(struct block_device *bdev, unsigned cmd, unsigned long arg)
diff --git a/fs/btrfs/backref.c b/fs/btrfs/backref.c
index f318793..208d8aa 100644
--- a/fs/btrfs/backref.c
+++ b/fs/btrfs/backref.c
@@ -283,9 +283,7 @@
goto out;
}
- rcu_read_lock();
- root_level = btrfs_header_level(root->node);
- rcu_read_unlock();
+ root_level = btrfs_old_root_level(root, time_seq);
if (root_level + 1 == level)
goto out;
@@ -1177,16 +1175,15 @@
return ret;
}
-static char *ref_to_path(struct btrfs_root *fs_root,
- struct btrfs_path *path,
- u32 name_len, unsigned long name_off,
- struct extent_buffer *eb_in, u64 parent,
- char *dest, u32 size)
+char *btrfs_ref_to_path(struct btrfs_root *fs_root, struct btrfs_path *path,
+ u32 name_len, unsigned long name_off,
+ struct extent_buffer *eb_in, u64 parent,
+ char *dest, u32 size)
{
int slot;
u64 next_inum;
int ret;
- s64 bytes_left = size - 1;
+ s64 bytes_left = ((s64)size) - 1;
struct extent_buffer *eb = eb_in;
struct btrfs_key found_key;
int leave_spinning = path->leave_spinning;
@@ -1266,10 +1263,10 @@
struct extent_buffer *eb_in, u64 parent,
char *dest, u32 size)
{
- return ref_to_path(fs_root, path,
- btrfs_inode_ref_name_len(eb_in, iref),
- (unsigned long)(iref + 1),
- eb_in, parent, dest, size);
+ return btrfs_ref_to_path(fs_root, path,
+ btrfs_inode_ref_name_len(eb_in, iref),
+ (unsigned long)(iref + 1),
+ eb_in, parent, dest, size);
}
/*
@@ -1715,9 +1712,8 @@
ipath->fspath->bytes_left - s_ptr : 0;
fspath_min = (char *)ipath->fspath->val + (i + 1) * s_ptr;
- fspath = ref_to_path(ipath->fs_root, ipath->btrfs_path, name_len,
- name_off, eb, inum, fspath_min,
- bytes_left);
+ fspath = btrfs_ref_to_path(ipath->fs_root, ipath->btrfs_path, name_len,
+ name_off, eb, inum, fspath_min, bytes_left);
if (IS_ERR(fspath))
return PTR_ERR(fspath);
diff --git a/fs/btrfs/backref.h b/fs/btrfs/backref.h
index e755330..d61feca7 100644
--- a/fs/btrfs/backref.h
+++ b/fs/btrfs/backref.h
@@ -62,6 +62,10 @@
char *btrfs_iref_to_path(struct btrfs_root *fs_root, struct btrfs_path *path,
struct btrfs_inode_ref *iref, struct extent_buffer *eb,
u64 parent, char *dest, u32 size);
+char *btrfs_ref_to_path(struct btrfs_root *fs_root, struct btrfs_path *path,
+ u32 name_len, unsigned long name_off,
+ struct extent_buffer *eb_in, u64 parent,
+ char *dest, u32 size);
struct btrfs_data_container *init_data_container(u32 total_bytes);
struct inode_fs_paths *init_ipath(s32 total_bytes, struct btrfs_root *fs_root,
diff --git a/fs/btrfs/ctree.c b/fs/btrfs/ctree.c
index b334362..cdfb4c4 100644
--- a/fs/btrfs/ctree.c
+++ b/fs/btrfs/ctree.c
@@ -596,6 +596,11 @@
if (tree_mod_dont_log(fs_info, eb))
return 0;
+ /*
+ * When we override something during the move, we log these removals.
+ * This can only happen when we move towards the beginning of the
+ * buffer, i.e. dst_slot < src_slot.
+ */
for (i = 0; i + dst_slot < src_slot && i < nr_items; i++) {
ret = tree_mod_log_insert_key_locked(fs_info, eb, i + dst_slot,
MOD_LOG_KEY_REMOVE_WHILE_MOVING);
@@ -647,8 +652,6 @@
if (tree_mod_dont_log(fs_info, NULL))
return 0;
- __tree_mod_log_free_eb(fs_info, old_root);
-
ret = tree_mod_alloc(fs_info, flags, &tm);
if (ret < 0)
goto out;
@@ -926,12 +929,7 @@
ret = btrfs_dec_ref(trans, root, buf, 1, 1);
BUG_ON(ret); /* -ENOMEM */
}
- /*
- * don't log freeing in case we're freeing the root node, this
- * is done by tree_mod_log_set_root_pointer later
- */
- if (buf != root->node && btrfs_header_level(buf) != 0)
- tree_mod_log_free_eb(root->fs_info, buf);
+ tree_mod_log_free_eb(root->fs_info, buf);
clean_tree_block(trans, root, buf);
*last_ref = 1;
}
@@ -1225,6 +1223,8 @@
free_extent_buffer(eb);
__tree_mod_log_rewind(eb_rewin, time_seq, tm);
+ WARN_ON(btrfs_header_nritems(eb_rewin) >
+ BTRFS_NODEPTRS_PER_BLOCK(fs_info->fs_root));
return eb_rewin;
}
@@ -1241,9 +1241,11 @@
{
struct tree_mod_elem *tm;
struct extent_buffer *eb;
+ struct extent_buffer *old;
struct tree_mod_root *old_root = NULL;
u64 old_generation = 0;
u64 logical;
+ u32 blocksize;
eb = btrfs_read_lock_root_node(root);
tm = __tree_mod_log_oldest_root(root->fs_info, root, time_seq);
@@ -1259,14 +1261,32 @@
}
tm = tree_mod_log_search(root->fs_info, logical, time_seq);
- if (old_root)
+ if (old_root && tm && tm->op != MOD_LOG_KEY_REMOVE_WHILE_FREEING) {
+ btrfs_tree_read_unlock(root->node);
+ free_extent_buffer(root->node);
+ blocksize = btrfs_level_size(root, old_root->level);
+ old = read_tree_block(root, logical, blocksize, 0);
+ if (!old) {
+ pr_warn("btrfs: failed to read tree block %llu from get_old_root\n",
+ logical);
+ WARN_ON(1);
+ } else {
+ eb = btrfs_clone_extent_buffer(old);
+ free_extent_buffer(old);
+ }
+ } else if (old_root) {
+ btrfs_tree_read_unlock(root->node);
+ free_extent_buffer(root->node);
eb = alloc_dummy_extent_buffer(logical, root->nodesize);
- else
+ } else {
eb = btrfs_clone_extent_buffer(root->node);
- btrfs_tree_read_unlock(root->node);
- free_extent_buffer(root->node);
+ btrfs_tree_read_unlock(root->node);
+ free_extent_buffer(root->node);
+ }
+
if (!eb)
return NULL;
+ extent_buffer_get(eb);
btrfs_tree_read_lock(eb);
if (old_root) {
btrfs_set_header_bytenr(eb, eb->start);
@@ -1279,11 +1299,28 @@
__tree_mod_log_rewind(eb, time_seq, tm);
else
WARN_ON(btrfs_header_level(eb) != 0);
- extent_buffer_get(eb);
+ WARN_ON(btrfs_header_nritems(eb) > BTRFS_NODEPTRS_PER_BLOCK(root));
return eb;
}
+int btrfs_old_root_level(struct btrfs_root *root, u64 time_seq)
+{
+ struct tree_mod_elem *tm;
+ int level;
+
+ tm = __tree_mod_log_oldest_root(root->fs_info, root, time_seq);
+ if (tm && tm->op == MOD_LOG_ROOT_REPLACE) {
+ level = tm->old_root.level;
+ } else {
+ rcu_read_lock();
+ level = btrfs_header_level(root->node);
+ rcu_read_unlock();
+ }
+
+ return level;
+}
+
static inline int should_cow_block(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
struct extent_buffer *buf)
@@ -1725,6 +1762,7 @@
goto enospc;
}
+ tree_mod_log_free_eb(root->fs_info, root->node);
tree_mod_log_set_root_pointer(root, child);
rcu_assign_pointer(root->node, child);
@@ -2970,8 +3008,10 @@
push_items * sizeof(struct btrfs_key_ptr));
if (push_items < src_nritems) {
- tree_mod_log_eb_move(root->fs_info, src, 0, push_items,
- src_nritems - push_items);
+ /*
+ * don't call tree_mod_log_eb_move here, key removal was already
+ * fully logged by tree_mod_log_eb_copy above.
+ */
memmove_extent_buffer(src, btrfs_node_key_ptr_offset(0),
btrfs_node_key_ptr_offset(push_items),
(src_nritems - push_items) *
diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h
index 926c9ff..c72ead8 100644
--- a/fs/btrfs/ctree.h
+++ b/fs/btrfs/ctree.h
@@ -3120,6 +3120,7 @@
{
return atomic_inc_return(&fs_info->tree_mod_seq);
}
+int btrfs_old_root_level(struct btrfs_root *root, u64 time_seq);
/* root-item.c */
int btrfs_find_root_ref(struct btrfs_root *tree_root,
@@ -3338,6 +3339,8 @@
int btrfs_update_inode(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
struct inode *inode);
+int btrfs_update_inode_fallback(struct btrfs_trans_handle *trans,
+ struct btrfs_root *root, struct inode *inode);
int btrfs_orphan_add(struct btrfs_trans_handle *trans, struct inode *inode);
int btrfs_orphan_del(struct btrfs_trans_handle *trans, struct inode *inode);
int btrfs_orphan_cleanup(struct btrfs_root *root);
diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c
index 8036d3a..472873a 100644
--- a/fs/btrfs/extent_io.c
+++ b/fs/btrfs/extent_io.c
@@ -4110,8 +4110,8 @@
return eb;
err:
- for (i--; i >= 0; i--)
- __free_page(eb->pages[i]);
+ for (; i > 0; i--)
+ __free_page(eb->pages[i - 1]);
__free_extent_buffer(eb);
return NULL;
}
diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index 85a1e50..95542a1 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -94,8 +94,6 @@
struct page *locked_page,
u64 start, u64 end, int *page_started,
unsigned long *nr_written, int unlock);
-static noinline int btrfs_update_inode_fallback(struct btrfs_trans_handle *trans,
- struct btrfs_root *root, struct inode *inode);
static int btrfs_init_inode_security(struct btrfs_trans_handle *trans,
struct inode *inode, struct inode *dir,
@@ -2746,8 +2744,9 @@
return btrfs_update_inode_item(trans, root, inode);
}
-static noinline int btrfs_update_inode_fallback(struct btrfs_trans_handle *trans,
- struct btrfs_root *root, struct inode *inode)
+noinline int btrfs_update_inode_fallback(struct btrfs_trans_handle *trans,
+ struct btrfs_root *root,
+ struct inode *inode)
{
int ret;
diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c
index 6116880..8fcf9a5 100644
--- a/fs/btrfs/ioctl.c
+++ b/fs/btrfs/ioctl.c
@@ -343,7 +343,8 @@
return -EOPNOTSUPP;
if (copy_from_user(&range, arg, sizeof(range)))
return -EFAULT;
- if (range.start > total_bytes)
+ if (range.start > total_bytes ||
+ range.len < fs_info->sb->s_blocksize)
return -EINVAL;
range.len = min(range.len, total_bytes - range.start);
@@ -570,7 +571,8 @@
ret = btrfs_commit_transaction(trans,
root->fs_info->extent_root);
}
- BUG_ON(ret);
+ if (ret)
+ goto fail;
ret = pending_snapshot->error;
if (ret)
diff --git a/fs/btrfs/qgroup.c b/fs/btrfs/qgroup.c
index 5039686..fe9d02c45 100644
--- a/fs/btrfs/qgroup.c
+++ b/fs/btrfs/qgroup.c
@@ -790,8 +790,10 @@
}
path = btrfs_alloc_path();
- if (!path)
- return -ENOMEM;
+ if (!path) {
+ ret = -ENOMEM;
+ goto out_free_root;
+ }
key.objectid = 0;
key.type = BTRFS_QGROUP_STATUS_KEY;
@@ -800,7 +802,7 @@
ret = btrfs_insert_empty_item(trans, quota_root, path, &key,
sizeof(*ptr));
if (ret)
- goto out;
+ goto out_free_path;
leaf = path->nodes[0];
ptr = btrfs_item_ptr(leaf, path->slots[0],
@@ -818,8 +820,15 @@
fs_info->quota_root = quota_root;
fs_info->pending_quota_state = 1;
spin_unlock(&fs_info->qgroup_lock);
-out:
+out_free_path:
btrfs_free_path(path);
+out_free_root:
+ if (ret) {
+ free_extent_buffer(quota_root->node);
+ free_extent_buffer(quota_root->commit_root);
+ kfree(quota_root);
+ }
+out:
return ret;
}
diff --git a/fs/btrfs/send.c b/fs/btrfs/send.c
index c7beb54..e78b297 100644
--- a/fs/btrfs/send.c
+++ b/fs/btrfs/send.c
@@ -745,31 +745,36 @@
void *ctx);
/*
- * Helper function to iterate the entries in ONE btrfs_inode_ref.
+ * Helper function to iterate the entries in ONE btrfs_inode_ref or
+ * btrfs_inode_extref.
* The iterate callback may return a non zero value to stop iteration. This can
* be a negative value for error codes or 1 to simply stop it.
*
- * path must point to the INODE_REF when called.
+ * path must point to the INODE_REF or INODE_EXTREF when called.
*/
static int iterate_inode_ref(struct send_ctx *sctx,
struct btrfs_root *root, struct btrfs_path *path,
struct btrfs_key *found_key, int resolve,
iterate_inode_ref_t iterate, void *ctx)
{
- struct extent_buffer *eb;
+ struct extent_buffer *eb = path->nodes[0];
struct btrfs_item *item;
struct btrfs_inode_ref *iref;
+ struct btrfs_inode_extref *extref;
struct btrfs_path *tmp_path;
struct fs_path *p;
- u32 cur;
- u32 len;
+ u32 cur = 0;
u32 total;
- int slot;
+ int slot = path->slots[0];
u32 name_len;
char *start;
int ret = 0;
- int num;
+ int num = 0;
int index;
+ u64 dir;
+ unsigned long name_off;
+ unsigned long elem_size;
+ unsigned long ptr;
p = fs_path_alloc_reversed(sctx);
if (!p)
@@ -781,24 +786,40 @@
return -ENOMEM;
}
- eb = path->nodes[0];
- slot = path->slots[0];
- item = btrfs_item_nr(eb, slot);
- iref = btrfs_item_ptr(eb, slot, struct btrfs_inode_ref);
- cur = 0;
- len = 0;
- total = btrfs_item_size(eb, item);
- num = 0;
+ if (found_key->type == BTRFS_INODE_REF_KEY) {
+ ptr = (unsigned long)btrfs_item_ptr(eb, slot,
+ struct btrfs_inode_ref);
+ item = btrfs_item_nr(eb, slot);
+ total = btrfs_item_size(eb, item);
+ elem_size = sizeof(*iref);
+ } else {
+ ptr = btrfs_item_ptr_offset(eb, slot);
+ total = btrfs_item_size_nr(eb, slot);
+ elem_size = sizeof(*extref);
+ }
+
while (cur < total) {
fs_path_reset(p);
- name_len = btrfs_inode_ref_name_len(eb, iref);
- index = btrfs_inode_ref_index(eb, iref);
+ if (found_key->type == BTRFS_INODE_REF_KEY) {
+ iref = (struct btrfs_inode_ref *)(ptr + cur);
+ name_len = btrfs_inode_ref_name_len(eb, iref);
+ name_off = (unsigned long)(iref + 1);
+ index = btrfs_inode_ref_index(eb, iref);
+ dir = found_key->offset;
+ } else {
+ extref = (struct btrfs_inode_extref *)(ptr + cur);
+ name_len = btrfs_inode_extref_name_len(eb, extref);
+ name_off = (unsigned long)&extref->name;
+ index = btrfs_inode_extref_index(eb, extref);
+ dir = btrfs_inode_extref_parent(eb, extref);
+ }
+
if (resolve) {
- start = btrfs_iref_to_path(root, tmp_path, iref, eb,
- found_key->offset, p->buf,
- p->buf_len);
+ start = btrfs_ref_to_path(root, tmp_path, name_len,
+ name_off, eb, dir,
+ p->buf, p->buf_len);
if (IS_ERR(start)) {
ret = PTR_ERR(start);
goto out;
@@ -809,9 +830,10 @@
p->buf_len + p->buf - start);
if (ret < 0)
goto out;
- start = btrfs_iref_to_path(root, tmp_path, iref,
- eb, found_key->offset, p->buf,
- p->buf_len);
+ start = btrfs_ref_to_path(root, tmp_path,
+ name_len, name_off,
+ eb, dir,
+ p->buf, p->buf_len);
if (IS_ERR(start)) {
ret = PTR_ERR(start);
goto out;
@@ -820,21 +842,16 @@
}
p->start = start;
} else {
- ret = fs_path_add_from_extent_buffer(p, eb,
- (unsigned long)(iref + 1), name_len);
+ ret = fs_path_add_from_extent_buffer(p, eb, name_off,
+ name_len);
if (ret < 0)
goto out;
}
-
- len = sizeof(*iref) + name_len;
- iref = (struct btrfs_inode_ref *)((char *)iref + len);
- cur += len;
-
- ret = iterate(num, found_key->offset, index, p, ctx);
+ cur += elem_size + name_len;
+ ret = iterate(num, dir, index, p, ctx);
if (ret)
goto out;
-
num++;
}
@@ -998,7 +1015,8 @@
}
btrfs_item_key_to_cpu(p->nodes[0], &found_key, p->slots[0]);
if (found_key.objectid != ino ||
- found_key.type != BTRFS_INODE_REF_KEY) {
+ (found_key.type != BTRFS_INODE_REF_KEY &&
+ found_key.type != BTRFS_INODE_EXTREF_KEY)) {
ret = -ENOENT;
goto out;
}
@@ -1551,8 +1569,8 @@
struct btrfs_key key;
struct btrfs_key found_key;
struct btrfs_path *path;
- struct btrfs_inode_ref *iref;
int len;
+ u64 parent_dir;
path = alloc_path_for_send();
if (!path)
@@ -1568,27 +1586,41 @@
if (!ret)
btrfs_item_key_to_cpu(path->nodes[0], &found_key,
path->slots[0]);
- if (ret || found_key.objectid != key.objectid ||
- found_key.type != key.type) {
+ if (ret || found_key.objectid != ino ||
+ (found_key.type != BTRFS_INODE_REF_KEY &&
+ found_key.type != BTRFS_INODE_EXTREF_KEY)) {
ret = -ENOENT;
goto out;
}
- iref = btrfs_item_ptr(path->nodes[0], path->slots[0],
- struct btrfs_inode_ref);
- len = btrfs_inode_ref_name_len(path->nodes[0], iref);
- ret = fs_path_add_from_extent_buffer(name, path->nodes[0],
- (unsigned long)(iref + 1), len);
+ if (key.type == BTRFS_INODE_REF_KEY) {
+ struct btrfs_inode_ref *iref;
+ iref = btrfs_item_ptr(path->nodes[0], path->slots[0],
+ struct btrfs_inode_ref);
+ len = btrfs_inode_ref_name_len(path->nodes[0], iref);
+ ret = fs_path_add_from_extent_buffer(name, path->nodes[0],
+ (unsigned long)(iref + 1),
+ len);
+ parent_dir = found_key.offset;
+ } else {
+ struct btrfs_inode_extref *extref;
+ extref = btrfs_item_ptr(path->nodes[0], path->slots[0],
+ struct btrfs_inode_extref);
+ len = btrfs_inode_extref_name_len(path->nodes[0], extref);
+ ret = fs_path_add_from_extent_buffer(name, path->nodes[0],
+ (unsigned long)&extref->name, len);
+ parent_dir = btrfs_inode_extref_parent(path->nodes[0], extref);
+ }
if (ret < 0)
goto out;
btrfs_release_path(path);
- ret = get_inode_info(root, found_key.offset, NULL, dir_gen, NULL, NULL,
+ ret = get_inode_info(root, parent_dir, NULL, dir_gen, NULL, NULL,
NULL, NULL);
if (ret < 0)
goto out;
- *dir = found_key.offset;
+ *dir = parent_dir;
out:
btrfs_free_path(path);
@@ -2430,7 +2462,8 @@
TLV_PUT_PATH(sctx, BTRFS_SEND_A_PATH_LINK, p);
} else if (S_ISCHR(mode) || S_ISBLK(mode) ||
S_ISFIFO(mode) || S_ISSOCK(mode)) {
- TLV_PUT_U64(sctx, BTRFS_SEND_A_RDEV, rdev);
+ TLV_PUT_U64(sctx, BTRFS_SEND_A_RDEV, new_encode_dev(rdev));
+ TLV_PUT_U64(sctx, BTRFS_SEND_A_MODE, mode);
}
ret = send_cmd(sctx);
@@ -3226,7 +3259,8 @@
btrfs_item_key_to_cpu(eb, &found_key, slot);
if (found_key.objectid != key.objectid ||
- found_key.type != key.type)
+ (found_key.type != BTRFS_INODE_REF_KEY &&
+ found_key.type != BTRFS_INODE_EXTREF_KEY))
break;
ret = iterate_inode_ref(sctx, root, path, &found_key, 0, cb,
@@ -3987,7 +4021,7 @@
if (sctx->cur_ino == 0)
goto out;
if (!at_end && sctx->cur_ino == sctx->cmp_key->objectid &&
- sctx->cmp_key->type <= BTRFS_INODE_REF_KEY)
+ sctx->cmp_key->type <= BTRFS_INODE_EXTREF_KEY)
goto out;
if (list_empty(&sctx->new_refs) && list_empty(&sctx->deleted_refs))
goto out;
@@ -4033,22 +4067,21 @@
if (ret < 0)
goto out;
- if (!S_ISLNK(sctx->cur_inode_mode)) {
- if (!sctx->parent_root || sctx->cur_inode_new) {
+ if (!sctx->parent_root || sctx->cur_inode_new) {
+ need_chown = 1;
+ if (!S_ISLNK(sctx->cur_inode_mode))
need_chmod = 1;
- need_chown = 1;
- } else {
- ret = get_inode_info(sctx->parent_root, sctx->cur_ino,
- NULL, NULL, &right_mode, &right_uid,
- &right_gid, NULL);
- if (ret < 0)
- goto out;
+ } else {
+ ret = get_inode_info(sctx->parent_root, sctx->cur_ino,
+ NULL, NULL, &right_mode, &right_uid,
+ &right_gid, NULL);
+ if (ret < 0)
+ goto out;
- if (left_uid != right_uid || left_gid != right_gid)
- need_chown = 1;
- if (left_mode != right_mode)
- need_chmod = 1;
- }
+ if (left_uid != right_uid || left_gid != right_gid)
+ need_chown = 1;
+ if (!S_ISLNK(sctx->cur_inode_mode) && left_mode != right_mode)
+ need_chmod = 1;
}
if (S_ISREG(sctx->cur_inode_mode)) {
@@ -4335,7 +4368,8 @@
if (key->type == BTRFS_INODE_ITEM_KEY)
ret = changed_inode(sctx, result);
- else if (key->type == BTRFS_INODE_REF_KEY)
+ else if (key->type == BTRFS_INODE_REF_KEY ||
+ key->type == BTRFS_INODE_EXTREF_KEY)
ret = changed_ref(sctx, result);
else if (key->type == BTRFS_XATTR_ITEM_KEY)
ret = changed_xattr(sctx, result);
diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c
index 77db875..04bbfb1 100644
--- a/fs/btrfs/transaction.c
+++ b/fs/btrfs/transaction.c
@@ -1200,7 +1200,7 @@
btrfs_i_size_write(parent_inode, parent_inode->i_size +
dentry->d_name.len * 2);
parent_inode->i_mtime = parent_inode->i_ctime = CURRENT_TIME;
- ret = btrfs_update_inode(trans, parent_root, parent_inode);
+ ret = btrfs_update_inode_fallback(trans, parent_root, parent_inode);
if (ret)
btrfs_abort_transaction(trans, root, ret);
fail:
diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c
index 029b903..0f5ebb7 100644
--- a/fs/btrfs/volumes.c
+++ b/fs/btrfs/volumes.c
@@ -1819,6 +1819,13 @@
"Failed to relocate sys chunks after "
"device initialization. This can be fixed "
"using the \"btrfs balance\" command.");
+ trans = btrfs_attach_transaction(root);
+ if (IS_ERR(trans)) {
+ if (PTR_ERR(trans) == -ENOENT)
+ return 0;
+ return PTR_ERR(trans);
+ }
+ ret = btrfs_commit_transaction(trans, root);
}
return ret;
diff --git a/fs/ceph/export.c b/fs/ceph/export.c
index 02ce909..9349bb3 100644
--- a/fs/ceph/export.c
+++ b/fs/ceph/export.c
@@ -90,6 +90,8 @@
*max_len = handle_length;
type = 255;
}
+ if (dentry)
+ dput(dentry);
return type;
}
diff --git a/fs/char_dev.c b/fs/char_dev.c
index 3f152b9..afc2bb6 100644
--- a/fs/char_dev.c
+++ b/fs/char_dev.c
@@ -471,9 +471,19 @@
*/
int cdev_add(struct cdev *p, dev_t dev, unsigned count)
{
+ int error;
+
p->dev = dev;
p->count = count;
- return kobj_map(cdev_map, dev, count, NULL, exact_match, exact_lock, p);
+
+ error = kobj_map(cdev_map, dev, count, NULL,
+ exact_match, exact_lock, p);
+ if (error)
+ return error;
+
+ kobject_get(p->kobj.parent);
+
+ return 0;
}
static void cdev_unmap(dev_t dev, unsigned count)
@@ -498,14 +508,20 @@
static void cdev_default_release(struct kobject *kobj)
{
struct cdev *p = container_of(kobj, struct cdev, kobj);
+ struct kobject *parent = kobj->parent;
+
cdev_purge(p);
+ kobject_put(parent);
}
static void cdev_dynamic_release(struct kobject *kobj)
{
struct cdev *p = container_of(kobj, struct cdev, kobj);
+ struct kobject *parent = kobj->parent;
+
cdev_purge(p);
kfree(p);
+ kobject_put(parent);
}
static struct kobj_type ktype_cdev_default = {
diff --git a/fs/cifs/cifsacl.c b/fs/cifs/cifsacl.c
index fc783e2..0fb15bb 100644
--- a/fs/cifs/cifsacl.c
+++ b/fs/cifs/cifsacl.c
@@ -225,6 +225,13 @@
}
static void
+cifs_copy_sid(struct cifs_sid *dst, const struct cifs_sid *src)
+{
+ memcpy(dst, src, sizeof(*dst));
+ dst->num_subauth = min_t(u8, src->num_subauth, NUM_SUBAUTHS);
+}
+
+static void
id_rb_insert(struct rb_root *root, struct cifs_sid *sidptr,
struct cifs_sid_id **psidid, char *typestr)
{
@@ -248,7 +255,7 @@
}
}
- memcpy(&(*psidid)->sid, sidptr, sizeof(struct cifs_sid));
+ cifs_copy_sid(&(*psidid)->sid, sidptr);
(*psidid)->time = jiffies - (SID_MAP_RETRY + 1);
(*psidid)->refcount = 0;
@@ -354,7 +361,7 @@
* any fields of the node after a reference is put .
*/
if (test_bit(SID_ID_MAPPED, &psidid->state)) {
- memcpy(ssid, &psidid->sid, sizeof(struct cifs_sid));
+ cifs_copy_sid(ssid, &psidid->sid);
psidid->time = jiffies; /* update ts for accessing */
goto id_sid_out;
}
@@ -370,14 +377,14 @@
if (IS_ERR(sidkey)) {
rc = -EINVAL;
cFYI(1, "%s: Can't map and id to a SID", __func__);
+ } else if (sidkey->datalen < sizeof(struct cifs_sid)) {
+ rc = -EIO;
+ cFYI(1, "%s: Downcall contained malformed key "
+ "(datalen=%hu)", __func__, sidkey->datalen);
} else {
lsid = (struct cifs_sid *)sidkey->payload.data;
- memcpy(&psidid->sid, lsid,
- sidkey->datalen < sizeof(struct cifs_sid) ?
- sidkey->datalen : sizeof(struct cifs_sid));
- memcpy(ssid, &psidid->sid,
- sidkey->datalen < sizeof(struct cifs_sid) ?
- sidkey->datalen : sizeof(struct cifs_sid));
+ cifs_copy_sid(&psidid->sid, lsid);
+ cifs_copy_sid(ssid, &psidid->sid);
set_bit(SID_ID_MAPPED, &psidid->state);
key_put(sidkey);
kfree(psidid->sidstr);
@@ -396,7 +403,7 @@
return rc;
}
if (test_bit(SID_ID_MAPPED, &psidid->state))
- memcpy(ssid, &psidid->sid, sizeof(struct cifs_sid));
+ cifs_copy_sid(ssid, &psidid->sid);
else
rc = -EINVAL;
}
@@ -675,8 +682,6 @@
static void copy_sec_desc(const struct cifs_ntsd *pntsd,
struct cifs_ntsd *pnntsd, __u32 sidsoffset)
{
- int i;
-
struct cifs_sid *owner_sid_ptr, *group_sid_ptr;
struct cifs_sid *nowner_sid_ptr, *ngroup_sid_ptr;
@@ -692,26 +697,14 @@
owner_sid_ptr = (struct cifs_sid *)((char *)pntsd +
le32_to_cpu(pntsd->osidoffset));
nowner_sid_ptr = (struct cifs_sid *)((char *)pnntsd + sidsoffset);
-
- nowner_sid_ptr->revision = owner_sid_ptr->revision;
- nowner_sid_ptr->num_subauth = owner_sid_ptr->num_subauth;
- for (i = 0; i < 6; i++)
- nowner_sid_ptr->authority[i] = owner_sid_ptr->authority[i];
- for (i = 0; i < 5; i++)
- nowner_sid_ptr->sub_auth[i] = owner_sid_ptr->sub_auth[i];
+ cifs_copy_sid(nowner_sid_ptr, owner_sid_ptr);
/* copy group sid */
group_sid_ptr = (struct cifs_sid *)((char *)pntsd +
le32_to_cpu(pntsd->gsidoffset));
ngroup_sid_ptr = (struct cifs_sid *)((char *)pnntsd + sidsoffset +
sizeof(struct cifs_sid));
-
- ngroup_sid_ptr->revision = group_sid_ptr->revision;
- ngroup_sid_ptr->num_subauth = group_sid_ptr->num_subauth;
- for (i = 0; i < 6; i++)
- ngroup_sid_ptr->authority[i] = group_sid_ptr->authority[i];
- for (i = 0; i < 5; i++)
- ngroup_sid_ptr->sub_auth[i] = group_sid_ptr->sub_auth[i];
+ cifs_copy_sid(ngroup_sid_ptr, group_sid_ptr);
return;
}
@@ -1120,8 +1113,7 @@
kfree(nowner_sid_ptr);
return rc;
}
- memcpy(owner_sid_ptr, nowner_sid_ptr,
- sizeof(struct cifs_sid));
+ cifs_copy_sid(owner_sid_ptr, nowner_sid_ptr);
kfree(nowner_sid_ptr);
*aclflag = CIFS_ACL_OWNER;
}
@@ -1139,8 +1131,7 @@
kfree(ngroup_sid_ptr);
return rc;
}
- memcpy(group_sid_ptr, ngroup_sid_ptr,
- sizeof(struct cifs_sid));
+ cifs_copy_sid(group_sid_ptr, ngroup_sid_ptr);
kfree(ngroup_sid_ptr);
*aclflag = CIFS_ACL_GROUP;
}
diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c
index 7c0a812..d3671f2 100644
--- a/fs/cifs/dir.c
+++ b/fs/cifs/dir.c
@@ -398,7 +398,16 @@
* in network traffic in the other paths.
*/
if (!(oflags & O_CREAT)) {
- struct dentry *res = cifs_lookup(inode, direntry, 0);
+ struct dentry *res;
+
+ /*
+ * Check for hashed negative dentry. We have already revalidated
+ * the dentry and it is fine. No need to perform another lookup.
+ */
+ if (!d_unhashed(direntry))
+ return -ENOENT;
+
+ res = cifs_lookup(inode, direntry, 0);
if (IS_ERR(res))
return PTR_ERR(res);
diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c
index f505402..4c6285f 100644
--- a/fs/compat_ioctl.c
+++ b/fs/compat_ioctl.c
@@ -210,6 +210,8 @@
err = get_user(palp, &up->palette);
err |= get_user(length, &up->length);
+ if (err)
+ return -EFAULT;
up_native = compat_alloc_user_space(sizeof(struct video_spu_palette));
err = put_user(compat_ptr(palp), &up_native->palette);
diff --git a/fs/devpts/inode.c b/fs/devpts/inode.c
index 14afbab..472e6be 100644
--- a/fs/devpts/inode.c
+++ b/fs/devpts/inode.c
@@ -545,37 +545,38 @@
mutex_unlock(&allocated_ptys_lock);
}
-int devpts_pty_new(struct inode *ptmx_inode, struct tty_struct *tty)
+/**
+ * devpts_pty_new -- create a new inode in /dev/pts/
+ * @ptmx_inode: inode of the master
+ * @device: major+minor of the node to be created
+ * @index: used as a name of the node
+ * @priv: what's given back by devpts_get_priv
+ *
+ * The created inode is returned. Remove it from /dev/pts/ by devpts_pty_kill.
+ */
+struct inode *devpts_pty_new(struct inode *ptmx_inode, dev_t device, int index,
+ void *priv)
{
- /* tty layer puts index from devpts_new_index() in here */
- int number = tty->index;
- struct tty_driver *driver = tty->driver;
- dev_t device = MKDEV(driver->major, driver->minor_start+number);
struct dentry *dentry;
struct super_block *sb = pts_sb_from_inode(ptmx_inode);
- struct inode *inode = new_inode(sb);
+ struct inode *inode;
struct dentry *root = sb->s_root;
struct pts_fs_info *fsi = DEVPTS_SB(sb);
struct pts_mount_opts *opts = &fsi->mount_opts;
- int ret = 0;
char s[12];
- /* We're supposed to be given the slave end of a pty */
- BUG_ON(driver->type != TTY_DRIVER_TYPE_PTY);
- BUG_ON(driver->subtype != PTY_TYPE_SLAVE);
-
+ inode = new_inode(sb);
if (!inode)
- return -ENOMEM;
+ return ERR_PTR(-ENOMEM);
- inode->i_ino = number + 3;
+ inode->i_ino = index + 3;
inode->i_uid = opts->setuid ? opts->uid : current_fsuid();
inode->i_gid = opts->setgid ? opts->gid : current_fsgid();
inode->i_mtime = inode->i_atime = inode->i_ctime = CURRENT_TIME;
init_special_inode(inode, S_IFCHR|opts->mode, device);
- inode->i_private = tty;
- tty->driver_data = inode;
+ inode->i_private = priv;
- sprintf(s, "%d", number);
+ sprintf(s, "%d", index);
mutex_lock(&root->d_inode->i_mutex);
@@ -585,18 +586,24 @@
fsnotify_create(root->d_inode, dentry);
} else {
iput(inode);
- ret = -ENOMEM;
+ inode = ERR_PTR(-ENOMEM);
}
mutex_unlock(&root->d_inode->i_mutex);
- return ret;
+ return inode;
}
-struct tty_struct *devpts_get_tty(struct inode *pts_inode, int number)
+/**
+ * devpts_get_priv -- get private data for a slave
+ * @pts_inode: inode of the slave
+ *
+ * Returns whatever was passed as priv in devpts_pty_new for a given inode.
+ */
+void *devpts_get_priv(struct inode *pts_inode)
{
struct dentry *dentry;
- struct tty_struct *tty;
+ void *priv = NULL;
BUG_ON(pts_inode->i_rdev == MKDEV(TTYAUX_MAJOR, PTMX_MINOR));
@@ -605,18 +612,22 @@
if (!dentry)
return NULL;
- tty = NULL;
if (pts_inode->i_sb->s_magic == DEVPTS_SUPER_MAGIC)
- tty = (struct tty_struct *)pts_inode->i_private;
+ priv = pts_inode->i_private;
dput(dentry);
- return tty;
+ return priv;
}
-void devpts_pty_kill(struct tty_struct *tty)
+/**
+ * devpts_pty_kill -- remove inode form /dev/pts/
+ * @inode: inode of the slave to be removed
+ *
+ * This is an inverse operation of devpts_pty_new.
+ */
+void devpts_pty_kill(struct inode *inode)
{
- struct inode *inode = tty->driver_data;
struct super_block *sb = pts_sb_from_inode(inode);
struct dentry *root = sb->s_root;
struct dentry *dentry;
diff --git a/fs/eventpoll.c b/fs/eventpoll.c
index da72250..cd96649 100644
--- a/fs/eventpoll.c
+++ b/fs/eventpoll.c
@@ -346,7 +346,7 @@
/* Tells if the epoll_ctl(2) operation needs an event copy from userspace */
static inline int ep_op_has_event(int op)
{
- return op == EPOLL_CTL_ADD || op == EPOLL_CTL_MOD;
+ return op != EPOLL_CTL_DEL;
}
/* Initialize the poll safe wake up structure */
@@ -676,34 +676,6 @@
return 0;
}
-/*
- * Disables a "struct epitem" in the eventpoll set. Returns -EBUSY if the item
- * had no event flags set, indicating that another thread may be currently
- * handling that item's events (in the case that EPOLLONESHOT was being
- * used). Otherwise a zero result indicates that the item has been disabled
- * from receiving events. A disabled item may be re-enabled via
- * EPOLL_CTL_MOD. Must be called with "mtx" held.
- */
-static int ep_disable(struct eventpoll *ep, struct epitem *epi)
-{
- int result = 0;
- unsigned long flags;
-
- spin_lock_irqsave(&ep->lock, flags);
- if (epi->event.events & ~EP_PRIVATE_BITS) {
- if (ep_is_linked(&epi->rdllink))
- list_del_init(&epi->rdllink);
- /* Ensure ep_poll_callback will not add epi back onto ready
- list: */
- epi->event.events &= EP_PRIVATE_BITS;
- }
- else
- result = -EBUSY;
- spin_unlock_irqrestore(&ep->lock, flags);
-
- return result;
-}
-
static void ep_free(struct eventpoll *ep)
{
struct rb_node *rbp;
@@ -1048,6 +1020,8 @@
rb_insert_color(&epi->rbn, &ep->rbr);
}
+
+
#define PATH_ARR_SIZE 5
/*
* These are the number paths of length 1 to 5, that we are allowing to emanate
@@ -1813,12 +1787,6 @@
} else
error = -ENOENT;
break;
- case EPOLL_CTL_DISABLE:
- if (epi)
- error = ep_disable(ep, epi);
- else
- error = -ENOENT;
- break;
}
mutex_unlock(&ep->mtx);
diff --git a/fs/exec.c b/fs/exec.c
index 8b9011b6..0039055 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -1083,7 +1083,8 @@
bprm->mm = NULL; /* We're using it now */
set_fs(USER_DS);
- current->flags &= ~(PF_RANDOMIZE | PF_FORKNOEXEC | PF_KTHREAD);
+ current->flags &=
+ ~(PF_RANDOMIZE | PF_FORKNOEXEC | PF_KTHREAD | PF_NOFREEZE);
flush_thread();
current->personality &= ~bprm->per_clear;
diff --git a/fs/ext3/balloc.c b/fs/ext3/balloc.c
index 7320a66..22548f5 100644
--- a/fs/ext3/balloc.c
+++ b/fs/ext3/balloc.c
@@ -2101,8 +2101,9 @@
end = start + (range->len >> sb->s_blocksize_bits) - 1;
minlen = range->minlen >> sb->s_blocksize_bits;
- if (unlikely(minlen > EXT3_BLOCKS_PER_GROUP(sb)) ||
- unlikely(start >= max_blks))
+ if (minlen > EXT3_BLOCKS_PER_GROUP(sb) ||
+ start >= max_blks ||
+ range->len < sb->s_blocksize)
return -EINVAL;
if (end >= max_blks)
end = max_blks - 1;
diff --git a/fs/ext4/balloc.c b/fs/ext4/balloc.c
index 1b50890..cf18217 100644
--- a/fs/ext4/balloc.c
+++ b/fs/ext4/balloc.c
@@ -174,8 +174,7 @@
ext4_free_inodes_set(sb, gdp, 0);
ext4_itable_unused_set(sb, gdp, 0);
memset(bh->b_data, 0xff, sb->s_blocksize);
- ext4_block_bitmap_csum_set(sb, block_group, gdp, bh,
- EXT4_BLOCKS_PER_GROUP(sb) / 8);
+ ext4_block_bitmap_csum_set(sb, block_group, gdp, bh);
return;
}
memset(bh->b_data, 0, sb->s_blocksize);
@@ -212,8 +211,7 @@
*/
ext4_mark_bitmap_end(num_clusters_in_group(sb, block_group),
sb->s_blocksize * 8, bh->b_data);
- ext4_block_bitmap_csum_set(sb, block_group, gdp, bh,
- EXT4_BLOCKS_PER_GROUP(sb) / 8);
+ ext4_block_bitmap_csum_set(sb, block_group, gdp, bh);
ext4_group_desc_csum_set(sb, block_group, gdp);
}
@@ -350,7 +348,7 @@
return;
}
if (unlikely(!ext4_block_bitmap_csum_verify(sb, block_group,
- desc, bh, EXT4_BLOCKS_PER_GROUP(sb) / 8))) {
+ desc, bh))) {
ext4_unlock_group(sb, block_group);
ext4_error(sb, "bg %u: bad block bitmap checksum", block_group);
return;
diff --git a/fs/ext4/bitmap.c b/fs/ext4/bitmap.c
index 5c2d181..3285aa5 100644
--- a/fs/ext4/bitmap.c
+++ b/fs/ext4/bitmap.c
@@ -58,11 +58,12 @@
int ext4_block_bitmap_csum_verify(struct super_block *sb, ext4_group_t group,
struct ext4_group_desc *gdp,
- struct buffer_head *bh, int sz)
+ struct buffer_head *bh)
{
__u32 hi;
__u32 provided, calculated;
struct ext4_sb_info *sbi = EXT4_SB(sb);
+ int sz = EXT4_CLUSTERS_PER_GROUP(sb) / 8;
if (!EXT4_HAS_RO_COMPAT_FEATURE(sb,
EXT4_FEATURE_RO_COMPAT_METADATA_CSUM))
@@ -84,8 +85,9 @@
void ext4_block_bitmap_csum_set(struct super_block *sb, ext4_group_t group,
struct ext4_group_desc *gdp,
- struct buffer_head *bh, int sz)
+ struct buffer_head *bh)
{
+ int sz = EXT4_CLUSTERS_PER_GROUP(sb) / 8;
__u32 csum;
struct ext4_sb_info *sbi = EXT4_SB(sb);
diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h
index 3ab2539b..3c20de1 100644
--- a/fs/ext4/ext4.h
+++ b/fs/ext4/ext4.h
@@ -1882,10 +1882,10 @@
struct buffer_head *bh, int sz);
void ext4_block_bitmap_csum_set(struct super_block *sb, ext4_group_t group,
struct ext4_group_desc *gdp,
- struct buffer_head *bh, int sz);
+ struct buffer_head *bh);
int ext4_block_bitmap_csum_verify(struct super_block *sb, ext4_group_t group,
struct ext4_group_desc *gdp,
- struct buffer_head *bh, int sz);
+ struct buffer_head *bh);
/* balloc.c */
extern void ext4_validate_block_bitmap(struct super_block *sb,
@@ -2063,8 +2063,7 @@
extern int ext4_calculate_overhead(struct super_block *sb);
extern int ext4_superblock_csum_verify(struct super_block *sb,
struct ext4_super_block *es);
-extern void ext4_superblock_csum_set(struct super_block *sb,
- struct ext4_super_block *es);
+extern void ext4_superblock_csum_set(struct super_block *sb);
extern void *ext4_kvmalloc(size_t size, gfp_t flags);
extern void *ext4_kvzalloc(size_t size, gfp_t flags);
extern void ext4_kvfree(void *ptr);
diff --git a/fs/ext4/ext4_jbd2.c b/fs/ext4/ext4_jbd2.c
index bfa65b4..b4323ba 100644
--- a/fs/ext4/ext4_jbd2.c
+++ b/fs/ext4/ext4_jbd2.c
@@ -143,17 +143,13 @@
struct buffer_head *bh = EXT4_SB(sb)->s_sbh;
int err = 0;
+ ext4_superblock_csum_set(sb);
if (ext4_handle_valid(handle)) {
- ext4_superblock_csum_set(sb,
- (struct ext4_super_block *)bh->b_data);
err = jbd2_journal_dirty_metadata(handle, bh);
if (err)
ext4_journal_abort_handle(where, line, __func__,
bh, handle, err);
- } else {
- ext4_superblock_csum_set(sb,
- (struct ext4_super_block *)bh->b_data);
+ } else
mark_buffer_dirty(bh);
- }
return err;
}
diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c
index 1c94cca..7011ac9 100644
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -52,6 +52,9 @@
#define EXT4_EXT_MARK_UNINIT1 0x2 /* mark first half uninitialized */
#define EXT4_EXT_MARK_UNINIT2 0x4 /* mark second half uninitialized */
+#define EXT4_EXT_DATA_VALID1 0x8 /* first half contains valid data */
+#define EXT4_EXT_DATA_VALID2 0x10 /* second half contains valid data */
+
static __le32 ext4_extent_block_csum(struct inode *inode,
struct ext4_extent_header *eh)
{
@@ -2914,6 +2917,9 @@
unsigned int ee_len, depth;
int err = 0;
+ BUG_ON((split_flag & (EXT4_EXT_DATA_VALID1 | EXT4_EXT_DATA_VALID2)) ==
+ (EXT4_EXT_DATA_VALID1 | EXT4_EXT_DATA_VALID2));
+
ext_debug("ext4_split_extents_at: inode %lu, logical"
"block %llu\n", inode->i_ino, (unsigned long long)split);
@@ -2972,7 +2978,14 @@
err = ext4_ext_insert_extent(handle, inode, path, &newex, flags);
if (err == -ENOSPC && (EXT4_EXT_MAY_ZEROOUT & split_flag)) {
- err = ext4_ext_zeroout(inode, &orig_ex);
+ if (split_flag & (EXT4_EXT_DATA_VALID1|EXT4_EXT_DATA_VALID2)) {
+ if (split_flag & EXT4_EXT_DATA_VALID1)
+ err = ext4_ext_zeroout(inode, ex2);
+ else
+ err = ext4_ext_zeroout(inode, ex);
+ } else
+ err = ext4_ext_zeroout(inode, &orig_ex);
+
if (err)
goto fix_extent_len;
/* update the extent length and mark as initialized */
@@ -3025,12 +3038,13 @@
uninitialized = ext4_ext_is_uninitialized(ex);
if (map->m_lblk + map->m_len < ee_block + ee_len) {
- split_flag1 = split_flag & EXT4_EXT_MAY_ZEROOUT ?
- EXT4_EXT_MAY_ZEROOUT : 0;
+ split_flag1 = split_flag & EXT4_EXT_MAY_ZEROOUT;
flags1 = flags | EXT4_GET_BLOCKS_PRE_IO;
if (uninitialized)
split_flag1 |= EXT4_EXT_MARK_UNINIT1 |
EXT4_EXT_MARK_UNINIT2;
+ if (split_flag & EXT4_EXT_DATA_VALID2)
+ split_flag1 |= EXT4_EXT_DATA_VALID1;
err = ext4_split_extent_at(handle, inode, path,
map->m_lblk + map->m_len, split_flag1, flags1);
if (err)
@@ -3043,8 +3057,8 @@
return PTR_ERR(path);
if (map->m_lblk >= ee_block) {
- split_flag1 = split_flag & EXT4_EXT_MAY_ZEROOUT ?
- EXT4_EXT_MAY_ZEROOUT : 0;
+ split_flag1 = split_flag & (EXT4_EXT_MAY_ZEROOUT |
+ EXT4_EXT_DATA_VALID2);
if (uninitialized)
split_flag1 |= EXT4_EXT_MARK_UNINIT1;
if (split_flag & EXT4_EXT_MARK_UNINIT2)
@@ -3323,26 +3337,47 @@
split_flag |= ee_block + ee_len <= eof_block ? EXT4_EXT_MAY_ZEROOUT : 0;
split_flag |= EXT4_EXT_MARK_UNINIT2;
-
+ if (flags & EXT4_GET_BLOCKS_CONVERT)
+ split_flag |= EXT4_EXT_DATA_VALID2;
flags |= EXT4_GET_BLOCKS_PRE_IO;
return ext4_split_extent(handle, inode, path, map, split_flag, flags);
}
static int ext4_convert_unwritten_extents_endio(handle_t *handle,
- struct inode *inode,
- struct ext4_ext_path *path)
+ struct inode *inode,
+ struct ext4_map_blocks *map,
+ struct ext4_ext_path *path)
{
struct ext4_extent *ex;
+ ext4_lblk_t ee_block;
+ unsigned int ee_len;
int depth;
int err = 0;
depth = ext_depth(inode);
ex = path[depth].p_ext;
+ ee_block = le32_to_cpu(ex->ee_block);
+ ee_len = ext4_ext_get_actual_len(ex);
ext_debug("ext4_convert_unwritten_extents_endio: inode %lu, logical"
"block %llu, max_blocks %u\n", inode->i_ino,
- (unsigned long long)le32_to_cpu(ex->ee_block),
- ext4_ext_get_actual_len(ex));
+ (unsigned long long)ee_block, ee_len);
+
+ /* If extent is larger than requested then split is required */
+ if (ee_block != map->m_lblk || ee_len > map->m_len) {
+ err = ext4_split_unwritten_extents(handle, inode, map, path,
+ EXT4_GET_BLOCKS_CONVERT);
+ if (err < 0)
+ goto out;
+ ext4_ext_drop_refs(path);
+ path = ext4_ext_find_extent(inode, map->m_lblk, path);
+ if (IS_ERR(path)) {
+ err = PTR_ERR(path);
+ goto out;
+ }
+ depth = ext_depth(inode);
+ ex = path[depth].p_ext;
+ }
err = ext4_ext_get_access(handle, inode, path + depth);
if (err)
@@ -3652,7 +3687,7 @@
}
/* IO end_io complete, convert the filled extent to written */
if ((flags & EXT4_GET_BLOCKS_CONVERT)) {
- ret = ext4_convert_unwritten_extents_endio(handle, inode,
+ ret = ext4_convert_unwritten_extents_endio(handle, inode, map,
path);
if (ret >= 0) {
ext4_update_inode_fsync_trans(handle, inode, 1);
@@ -4428,6 +4463,9 @@
*/
if (len <= EXT_UNINIT_MAX_LEN << blkbits)
flags |= EXT4_GET_BLOCKS_NO_NORMALIZE;
+
+ /* Prevent race condition between unwritten */
+ ext4_flush_unwritten_io(inode);
retry:
while (ret >= 0 && ret < max_blocks) {
map.m_lblk = map.m_lblk + ret;
diff --git a/fs/ext4/ialloc.c b/fs/ext4/ialloc.c
index fa36372f..3a100e7 100644
--- a/fs/ext4/ialloc.c
+++ b/fs/ext4/ialloc.c
@@ -725,6 +725,10 @@
"inode=%lu", ino + 1);
continue;
}
+ BUFFER_TRACE(inode_bitmap_bh, "get_write_access");
+ err = ext4_journal_get_write_access(handle, inode_bitmap_bh);
+ if (err)
+ goto fail;
ext4_lock_group(sb, group);
ret2 = ext4_test_and_set_bit(ino, inode_bitmap_bh->b_data);
ext4_unlock_group(sb, group);
@@ -738,6 +742,11 @@
goto out;
got:
+ BUFFER_TRACE(inode_bitmap_bh, "call ext4_handle_dirty_metadata");
+ err = ext4_handle_dirty_metadata(handle, NULL, inode_bitmap_bh);
+ if (err)
+ goto fail;
+
/* We may have to initialize the block bitmap if it isn't already */
if (ext4_has_group_desc_csum(sb) &&
gdp->bg_flags & cpu_to_le16(EXT4_BG_BLOCK_UNINIT)) {
@@ -762,9 +771,7 @@
ext4_free_group_clusters_set(sb, gdp,
ext4_free_clusters_after_init(sb, group, gdp));
ext4_block_bitmap_csum_set(sb, group, gdp,
- block_bitmap_bh,
- EXT4_BLOCKS_PER_GROUP(sb) /
- 8);
+ block_bitmap_bh);
ext4_group_desc_csum_set(sb, group, gdp);
}
ext4_unlock_group(sb, group);
@@ -773,11 +780,6 @@
goto fail;
}
- BUFFER_TRACE(inode_bitmap_bh, "get_write_access");
- err = ext4_journal_get_write_access(handle, inode_bitmap_bh);
- if (err)
- goto fail;
-
BUFFER_TRACE(group_desc_bh, "get_write_access");
err = ext4_journal_get_write_access(handle, group_desc_bh);
if (err)
@@ -825,11 +827,6 @@
}
ext4_unlock_group(sb, group);
- BUFFER_TRACE(inode_bitmap_bh, "call ext4_handle_dirty_metadata");
- err = ext4_handle_dirty_metadata(handle, NULL, inode_bitmap_bh);
- if (err)
- goto fail;
-
BUFFER_TRACE(group_desc_bh, "call ext4_handle_dirty_metadata");
err = ext4_handle_dirty_metadata(handle, NULL, group_desc_bh);
if (err)
diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
index f8b27bf..526e553 100644
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -2805,8 +2805,7 @@
}
len = ext4_free_group_clusters(sb, gdp) - ac->ac_b_ex.fe_len;
ext4_free_group_clusters_set(sb, gdp, len);
- ext4_block_bitmap_csum_set(sb, ac->ac_b_ex.fe_group, gdp, bitmap_bh,
- EXT4_BLOCKS_PER_GROUP(sb) / 8);
+ ext4_block_bitmap_csum_set(sb, ac->ac_b_ex.fe_group, gdp, bitmap_bh);
ext4_group_desc_csum_set(sb, ac->ac_b_ex.fe_group, gdp);
ext4_unlock_group(sb, ac->ac_b_ex.fe_group);
@@ -4666,8 +4665,7 @@
ret = ext4_free_group_clusters(sb, gdp) + count_clusters;
ext4_free_group_clusters_set(sb, gdp, ret);
- ext4_block_bitmap_csum_set(sb, block_group, gdp, bitmap_bh,
- EXT4_BLOCKS_PER_GROUP(sb) / 8);
+ ext4_block_bitmap_csum_set(sb, block_group, gdp, bitmap_bh);
ext4_group_desc_csum_set(sb, block_group, gdp);
ext4_unlock_group(sb, block_group);
percpu_counter_add(&sbi->s_freeclusters_counter, count_clusters);
@@ -4811,8 +4809,7 @@
mb_free_blocks(NULL, &e4b, bit, count);
blk_free_count = blocks_freed + ext4_free_group_clusters(sb, desc);
ext4_free_group_clusters_set(sb, desc, blk_free_count);
- ext4_block_bitmap_csum_set(sb, block_group, desc, bitmap_bh,
- EXT4_BLOCKS_PER_GROUP(sb) / 8);
+ ext4_block_bitmap_csum_set(sb, block_group, desc, bitmap_bh);
ext4_group_desc_csum_set(sb, block_group, desc);
ext4_unlock_group(sb, block_group);
percpu_counter_add(&sbi->s_freeclusters_counter,
@@ -4993,8 +4990,9 @@
minlen = EXT4_NUM_B2C(EXT4_SB(sb),
range->minlen >> sb->s_blocksize_bits);
- if (unlikely(minlen > EXT4_CLUSTERS_PER_GROUP(sb)) ||
- unlikely(start >= max_blks))
+ if (minlen > EXT4_CLUSTERS_PER_GROUP(sb) ||
+ start >= max_blks ||
+ range->len < sb->s_blocksize)
return -EINVAL;
if (end >= max_blks)
end = max_blks - 1;
diff --git a/fs/ext4/resize.c b/fs/ext4/resize.c
index 7a75e10..47bf06a 100644
--- a/fs/ext4/resize.c
+++ b/fs/ext4/resize.c
@@ -1212,8 +1212,7 @@
bh = ext4_get_bitmap(sb, group_data->block_bitmap);
if (!bh)
return -EIO;
- ext4_block_bitmap_csum_set(sb, group, gdp, bh,
- EXT4_BLOCKS_PER_GROUP(sb) / 8);
+ ext4_block_bitmap_csum_set(sb, group, gdp, bh);
brelse(bh);
return 0;
diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index 7265a03..80928f7 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -143,9 +143,10 @@
return es->s_checksum == ext4_superblock_csum(sb, es);
}
-void ext4_superblock_csum_set(struct super_block *sb,
- struct ext4_super_block *es)
+void ext4_superblock_csum_set(struct super_block *sb)
{
+ struct ext4_super_block *es = EXT4_SB(sb)->s_es;
+
if (!EXT4_HAS_RO_COMPAT_FEATURE(sb,
EXT4_FEATURE_RO_COMPAT_METADATA_CSUM))
return;
@@ -1963,7 +1964,7 @@
sbi->s_log_groups_per_flex = 0;
return 1;
}
- groups_per_flex = 1 << sbi->s_log_groups_per_flex;
+ groups_per_flex = 1U << sbi->s_log_groups_per_flex;
err = ext4_alloc_flex_bg_array(sb, sbi->s_groups_count);
if (err)
@@ -4381,7 +4382,7 @@
cpu_to_le32(percpu_counter_sum_positive(
&EXT4_SB(sb)->s_freeinodes_counter));
BUFFER_TRACE(sbh, "marking dirty");
- ext4_superblock_csum_set(sb, es);
+ ext4_superblock_csum_set(sb);
mark_buffer_dirty(sbh);
if (sync) {
error = sync_dirty_buffer(sbh);
diff --git a/fs/file.c b/fs/file.c
index d3b5fa8..7cb71b9 100644
--- a/fs/file.c
+++ b/fs/file.c
@@ -685,7 +685,6 @@
struct fdtable *fdt;
/* exec unshares first */
- BUG_ON(atomic_read(&files->count) != 1);
spin_lock(&files->file_lock);
for (i = 0; ; i++) {
unsigned long set;
@@ -900,7 +899,7 @@
return __close_fd(files, fd);
if (fd >= rlimit(RLIMIT_NOFILE))
- return -EMFILE;
+ return -EBADF;
spin_lock(&files->file_lock);
err = expand_files(files, fd);
@@ -926,7 +925,7 @@
return -EINVAL;
if (newfd >= rlimit(RLIMIT_NOFILE))
- return -EMFILE;
+ return -EBADF;
spin_lock(&files->file_lock);
err = expand_files(files, newfd);
diff --git a/fs/gfs2/file.c b/fs/gfs2/file.c
index 0def050..e056b4c 100644
--- a/fs/gfs2/file.c
+++ b/fs/gfs2/file.c
@@ -516,15 +516,13 @@
struct gfs2_holder i_gh;
int error;
- gfs2_holder_init(ip->i_gl, LM_ST_SHARED, LM_FLAG_ANY, &i_gh);
- error = gfs2_glock_nq(&i_gh);
- if (error == 0) {
- file_accessed(file);
- gfs2_glock_dq(&i_gh);
- }
- gfs2_holder_uninit(&i_gh);
+ error = gfs2_glock_nq_init(ip->i_gl, LM_ST_SHARED, LM_FLAG_ANY,
+ &i_gh);
if (error)
return error;
+ /* grab lock to update inode */
+ gfs2_glock_dq_uninit(&i_gh);
+ file_accessed(file);
}
vma->vm_ops = &gfs2_vm_ops;
@@ -677,10 +675,8 @@
size_t writesize = iov_length(iov, nr_segs);
struct dentry *dentry = file->f_dentry;
struct gfs2_inode *ip = GFS2_I(dentry->d_inode);
- struct gfs2_sbd *sdp;
int ret;
- sdp = GFS2_SB(file->f_mapping->host);
ret = gfs2_rs_alloc(ip);
if (ret)
return ret;
diff --git a/fs/gfs2/lops.c b/fs/gfs2/lops.c
index 8ff95a2..9ceccb1 100644
--- a/fs/gfs2/lops.c
+++ b/fs/gfs2/lops.c
@@ -393,12 +393,10 @@
struct gfs2_meta_header *mh;
struct gfs2_trans *tr;
- lock_buffer(bd->bd_bh);
- gfs2_log_lock(sdp);
tr = current->journal_info;
tr->tr_touched = 1;
if (!list_empty(&bd->bd_list))
- goto out;
+ return;
set_bit(GLF_LFLUSH, &bd->bd_gl->gl_flags);
set_bit(GLF_DIRTY, &bd->bd_gl->gl_flags);
mh = (struct gfs2_meta_header *)bd->bd_bh->b_data;
@@ -414,9 +412,6 @@
sdp->sd_log_num_buf++;
list_add(&bd->bd_list, &sdp->sd_log_le_buf);
tr->tr_num_buf_new++;
-out:
- gfs2_log_unlock(sdp);
- unlock_buffer(bd->bd_bh);
}
static void gfs2_check_magic(struct buffer_head *bh)
@@ -621,7 +616,6 @@
static void revoke_lo_before_commit(struct gfs2_sbd *sdp)
{
- struct gfs2_log_descriptor *ld;
struct gfs2_meta_header *mh;
unsigned int offset;
struct list_head *head = &sdp->sd_log_le_revoke;
@@ -634,7 +628,6 @@
length = gfs2_struct2blk(sdp, sdp->sd_log_num_revoke, sizeof(u64));
page = gfs2_get_log_desc(sdp, GFS2_LOG_DESC_REVOKE, length, sdp->sd_log_num_revoke);
- ld = page_address(page);
offset = sizeof(struct gfs2_log_descriptor);
list_for_each_entry(bd, head, bd_list) {
@@ -777,12 +770,10 @@
struct address_space *mapping = bd->bd_bh->b_page->mapping;
struct gfs2_inode *ip = GFS2_I(mapping->host);
- lock_buffer(bd->bd_bh);
- gfs2_log_lock(sdp);
if (tr)
tr->tr_touched = 1;
if (!list_empty(&bd->bd_list))
- goto out;
+ return;
set_bit(GLF_LFLUSH, &bd->bd_gl->gl_flags);
set_bit(GLF_DIRTY, &bd->bd_gl->gl_flags);
if (gfs2_is_jdata(ip)) {
@@ -793,9 +784,6 @@
} else {
list_add_tail(&bd->bd_list, &sdp->sd_log_le_ordered);
}
-out:
- gfs2_log_unlock(sdp);
- unlock_buffer(bd->bd_bh);
}
/**
diff --git a/fs/gfs2/quota.c b/fs/gfs2/quota.c
index 40c4b0d..c5af8e1 100644
--- a/fs/gfs2/quota.c
+++ b/fs/gfs2/quota.c
@@ -497,8 +497,11 @@
struct gfs2_quota_data **qd;
int error;
- if (ip->i_res == NULL)
- gfs2_rs_alloc(ip);
+ if (ip->i_res == NULL) {
+ error = gfs2_rs_alloc(ip);
+ if (error)
+ return error;
+ }
qd = ip->i_res->rs_qa_qd;
diff --git a/fs/gfs2/rgrp.c b/fs/gfs2/rgrp.c
index 3cc402c..38fe18f 100644
--- a/fs/gfs2/rgrp.c
+++ b/fs/gfs2/rgrp.c
@@ -553,7 +553,6 @@
*/
int gfs2_rs_alloc(struct gfs2_inode *ip)
{
- int error = 0;
struct gfs2_blkreserv *res;
if (ip->i_res)
@@ -561,7 +560,7 @@
res = kmem_cache_zalloc(gfs2_rsrv_cachep, GFP_NOFS);
if (!res)
- error = -ENOMEM;
+ return -ENOMEM;
RB_CLEAR_NODE(&res->rs_node);
@@ -571,7 +570,7 @@
else
ip->i_res = res;
up_write(&ip->i_rw_mutex);
- return error;
+ return 0;
}
static void dump_rs(struct seq_file *seq, const struct gfs2_blkreserv *rs)
@@ -1263,7 +1262,9 @@
int ret = 0;
u64 amt;
u64 trimmed = 0;
+ u64 start, end, minlen;
unsigned int x;
+ unsigned bs_shift = sdp->sd_sb.sb_bsize_shift;
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
@@ -1271,19 +1272,25 @@
if (!blk_queue_discard(q))
return -EOPNOTSUPP;
- if (argp == NULL) {
- r.start = 0;
- r.len = ULLONG_MAX;
- r.minlen = 0;
- } else if (copy_from_user(&r, argp, sizeof(r)))
+ if (copy_from_user(&r, argp, sizeof(r)))
return -EFAULT;
ret = gfs2_rindex_update(sdp);
if (ret)
return ret;
- rgd = gfs2_blk2rgrpd(sdp, r.start, 0);
- rgd_end = gfs2_blk2rgrpd(sdp, r.start + r.len, 0);
+ start = r.start >> bs_shift;
+ end = start + (r.len >> bs_shift);
+ minlen = max_t(u64, r.minlen,
+ q->limits.discard_granularity) >> bs_shift;
+
+ rgd = gfs2_blk2rgrpd(sdp, start, 0);
+ rgd_end = gfs2_blk2rgrpd(sdp, end - 1, 0);
+
+ if (end <= start ||
+ minlen > sdp->sd_max_rg_data ||
+ start > rgd_end->rd_data0 + rgd_end->rd_data)
+ return -EINVAL;
while (1) {
@@ -1295,7 +1302,9 @@
/* Trim each bitmap in the rgrp */
for (x = 0; x < rgd->rd_length; x++) {
struct gfs2_bitmap *bi = rgd->rd_bits + x;
- ret = gfs2_rgrp_send_discards(sdp, rgd->rd_data0, NULL, bi, r.minlen, &amt);
+ ret = gfs2_rgrp_send_discards(sdp,
+ rgd->rd_data0, NULL, bi, minlen,
+ &amt);
if (ret) {
gfs2_glock_dq_uninit(&gh);
goto out;
@@ -1324,7 +1333,7 @@
out:
r.len = trimmed << 9;
- if (argp && copy_to_user(argp, &r, sizeof(r)))
+ if (copy_to_user(argp, &r, sizeof(r)))
return -EFAULT;
return ret;
diff --git a/fs/gfs2/super.c b/fs/gfs2/super.c
index bc73726..d648867 100644
--- a/fs/gfs2/super.c
+++ b/fs/gfs2/super.c
@@ -810,7 +810,8 @@
return;
}
need_unlock = 1;
- }
+ } else if (WARN_ON_ONCE(ip->i_gl->gl_state != LM_ST_EXCLUSIVE))
+ return;
if (current->journal_info == NULL) {
ret = gfs2_trans_begin(sdp, RES_DINODE, 0);
diff --git a/fs/gfs2/trans.c b/fs/gfs2/trans.c
index adbd278..4136270 100644
--- a/fs/gfs2/trans.c
+++ b/fs/gfs2/trans.c
@@ -155,14 +155,22 @@
struct gfs2_sbd *sdp = gl->gl_sbd;
struct gfs2_bufdata *bd;
+ lock_buffer(bh);
+ gfs2_log_lock(sdp);
bd = bh->b_private;
if (bd)
gfs2_assert(sdp, bd->bd_gl == gl);
else {
+ gfs2_log_unlock(sdp);
+ unlock_buffer(bh);
gfs2_attach_bufdata(gl, bh, meta);
bd = bh->b_private;
+ lock_buffer(bh);
+ gfs2_log_lock(sdp);
}
lops_add(sdp, bd);
+ gfs2_log_unlock(sdp);
+ unlock_buffer(bh);
}
void gfs2_trans_add_revoke(struct gfs2_sbd *sdp, struct gfs2_bufdata *bd)
diff --git a/fs/jffs2/file.c b/fs/jffs2/file.c
index 60ef3fb..1506673 100644
--- a/fs/jffs2/file.c
+++ b/fs/jffs2/file.c
@@ -138,33 +138,39 @@
struct page *pg;
struct inode *inode = mapping->host;
struct jffs2_inode_info *f = JFFS2_INODE_INFO(inode);
+ struct jffs2_sb_info *c = JFFS2_SB_INFO(inode->i_sb);
+ struct jffs2_raw_inode ri;
+ uint32_t alloc_len = 0;
pgoff_t index = pos >> PAGE_CACHE_SHIFT;
uint32_t pageofs = index << PAGE_CACHE_SHIFT;
int ret = 0;
- pg = grab_cache_page_write_begin(mapping, index, flags);
- if (!pg)
- return -ENOMEM;
- *pagep = pg;
-
jffs2_dbg(1, "%s()\n", __func__);
if (pageofs > inode->i_size) {
+ ret = jffs2_reserve_space(c, sizeof(ri), &alloc_len,
+ ALLOC_NORMAL, JFFS2_SUMMARY_INODE_SIZE);
+ if (ret)
+ return ret;
+ }
+
+ mutex_lock(&f->sem);
+ pg = grab_cache_page_write_begin(mapping, index, flags);
+ if (!pg) {
+ if (alloc_len)
+ jffs2_complete_reservation(c);
+ mutex_unlock(&f->sem);
+ return -ENOMEM;
+ }
+ *pagep = pg;
+
+ if (alloc_len) {
/* Make new hole frag from old EOF to new page */
- struct jffs2_sb_info *c = JFFS2_SB_INFO(inode->i_sb);
- struct jffs2_raw_inode ri;
struct jffs2_full_dnode *fn;
- uint32_t alloc_len;
jffs2_dbg(1, "Writing new hole frag 0x%x-0x%x between current EOF and new page\n",
(unsigned int)inode->i_size, pageofs);
- ret = jffs2_reserve_space(c, sizeof(ri), &alloc_len,
- ALLOC_NORMAL, JFFS2_SUMMARY_INODE_SIZE);
- if (ret)
- goto out_page;
-
- mutex_lock(&f->sem);
memset(&ri, 0, sizeof(ri));
ri.magic = cpu_to_je16(JFFS2_MAGIC_BITMASK);
@@ -191,7 +197,6 @@
if (IS_ERR(fn)) {
ret = PTR_ERR(fn);
jffs2_complete_reservation(c);
- mutex_unlock(&f->sem);
goto out_page;
}
ret = jffs2_add_full_dnode_to_inode(c, f, fn);
@@ -206,12 +211,10 @@
jffs2_mark_node_obsolete(c, fn->raw);
jffs2_free_full_dnode(fn);
jffs2_complete_reservation(c);
- mutex_unlock(&f->sem);
goto out_page;
}
jffs2_complete_reservation(c);
inode->i_size = pageofs;
- mutex_unlock(&f->sem);
}
/*
@@ -220,18 +223,18 @@
* case of a short-copy.
*/
if (!PageUptodate(pg)) {
- mutex_lock(&f->sem);
ret = jffs2_do_readpage_nolock(inode, pg);
- mutex_unlock(&f->sem);
if (ret)
goto out_page;
}
+ mutex_unlock(&f->sem);
jffs2_dbg(1, "end write_begin(). pg->flags %lx\n", pg->flags);
return ret;
out_page:
unlock_page(pg);
page_cache_release(pg);
+ mutex_unlock(&f->sem);
return ret;
}
diff --git a/fs/jfs/jfs_discard.c b/fs/jfs/jfs_discard.c
index 9947563..dfcd503 100644
--- a/fs/jfs/jfs_discard.c
+++ b/fs/jfs/jfs_discard.c
@@ -83,7 +83,7 @@
struct bmap *bmp = JFS_SBI(ip->i_sb)->bmap;
struct super_block *sb = ipbmap->i_sb;
int agno, agno_end;
- s64 start, end, minlen;
+ u64 start, end, minlen;
u64 trimmed = 0;
/**
@@ -93,14 +93,18 @@
* minlen: minimum extent length in Bytes
*/
start = range->start >> sb->s_blocksize_bits;
- if (start < 0)
- start = 0;
end = start + (range->len >> sb->s_blocksize_bits) - 1;
+ minlen = range->minlen >> sb->s_blocksize_bits;
+ if (minlen == 0)
+ minlen = 1;
+
+ if (minlen > bmp->db_agsize ||
+ start >= bmp->db_mapsize ||
+ range->len < sb->s_blocksize)
+ return -EINVAL;
+
if (end >= bmp->db_mapsize)
end = bmp->db_mapsize - 1;
- minlen = range->minlen >> sb->s_blocksize_bits;
- if (minlen <= 0)
- minlen = 1;
/**
* we trim all ag's within the range
diff --git a/fs/lockd/mon.c b/fs/lockd/mon.c
index e4fb3ba..3d7e09b 100644
--- a/fs/lockd/mon.c
+++ b/fs/lockd/mon.c
@@ -85,29 +85,38 @@
return rpc_create(&args);
}
+static struct rpc_clnt *nsm_client_set(struct lockd_net *ln,
+ struct rpc_clnt *clnt)
+{
+ spin_lock(&ln->nsm_clnt_lock);
+ if (ln->nsm_users == 0) {
+ if (clnt == NULL)
+ goto out;
+ ln->nsm_clnt = clnt;
+ }
+ clnt = ln->nsm_clnt;
+ ln->nsm_users++;
+out:
+ spin_unlock(&ln->nsm_clnt_lock);
+ return clnt;
+}
+
static struct rpc_clnt *nsm_client_get(struct net *net)
{
- static DEFINE_MUTEX(nsm_create_mutex);
- struct rpc_clnt *clnt;
+ struct rpc_clnt *clnt, *new;
struct lockd_net *ln = net_generic(net, lockd_net_id);
- spin_lock(&ln->nsm_clnt_lock);
- if (ln->nsm_users) {
- ln->nsm_users++;
- clnt = ln->nsm_clnt;
- spin_unlock(&ln->nsm_clnt_lock);
+ clnt = nsm_client_set(ln, NULL);
+ if (clnt != NULL)
goto out;
- }
- spin_unlock(&ln->nsm_clnt_lock);
- mutex_lock(&nsm_create_mutex);
- clnt = nsm_create(net);
- if (!IS_ERR(clnt)) {
- ln->nsm_clnt = clnt;
- smp_wmb();
- ln->nsm_users = 1;
- }
- mutex_unlock(&nsm_create_mutex);
+ clnt = new = nsm_create(net);
+ if (IS_ERR(clnt))
+ goto out;
+
+ clnt = nsm_client_set(ln, new);
+ if (clnt != new)
+ rpc_shutdown_client(new);
out:
return clnt;
}
@@ -115,18 +124,16 @@
static void nsm_client_put(struct net *net)
{
struct lockd_net *ln = net_generic(net, lockd_net_id);
- struct rpc_clnt *clnt = ln->nsm_clnt;
- int shutdown = 0;
+ struct rpc_clnt *clnt = NULL;
spin_lock(&ln->nsm_clnt_lock);
- if (ln->nsm_users) {
- if (--ln->nsm_users)
- ln->nsm_clnt = NULL;
- shutdown = !ln->nsm_users;
+ ln->nsm_users--;
+ if (ln->nsm_users == 0) {
+ clnt = ln->nsm_clnt;
+ ln->nsm_clnt = NULL;
}
spin_unlock(&ln->nsm_clnt_lock);
-
- if (shutdown)
+ if (clnt != NULL)
rpc_shutdown_client(clnt);
}
diff --git a/fs/namei.c b/fs/namei.c
index d1895f3..937f9d5 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -705,8 +705,8 @@
path_put(link);
}
-int sysctl_protected_symlinks __read_mostly = 1;
-int sysctl_protected_hardlinks __read_mostly = 1;
+int sysctl_protected_symlinks __read_mostly = 0;
+int sysctl_protected_hardlinks __read_mostly = 0;
/**
* may_follow_link - Check symlink following for unsafe situations
diff --git a/fs/nfs/callback.c b/fs/nfs/callback.c
index 9a521fb..5088b57 100644
--- a/fs/nfs/callback.c
+++ b/fs/nfs/callback.c
@@ -241,7 +241,7 @@
svc_exit_thread(cb_info->rqst);
cb_info->rqst = NULL;
cb_info->task = NULL;
- return PTR_ERR(cb_info->task);
+ return ret;
}
dprintk("nfs_callback_up: service started\n");
return 0;
diff --git a/fs/nfs/dns_resolve.c b/fs/nfs/dns_resolve.c
index 31c26c4..ca4b11e 100644
--- a/fs/nfs/dns_resolve.c
+++ b/fs/nfs/dns_resolve.c
@@ -217,7 +217,7 @@
{
char buf1[NFS_DNS_HOSTNAME_MAXLEN+1];
struct nfs_dns_ent key, *item;
- unsigned long ttl;
+ unsigned int ttl;
ssize_t len;
int ret = -EINVAL;
@@ -240,7 +240,8 @@
key.namelen = len;
memset(&key.h, 0, sizeof(key.h));
- ttl = get_expiry(&buf);
+ if (get_uint(&buf, &ttl) < 0)
+ goto out;
if (ttl == 0)
goto out;
key.h.expiry_time = ttl + seconds_since_boot();
diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c
index 5c7325c..6fa01ae 100644
--- a/fs/nfs/inode.c
+++ b/fs/nfs/inode.c
@@ -685,7 +685,10 @@
if (ctx->cred != NULL)
put_rpccred(ctx->cred);
dput(ctx->dentry);
- nfs_sb_deactive(sb);
+ if (is_sync)
+ nfs_sb_deactive(sb);
+ else
+ nfs_sb_deactive_async(sb);
kfree(ctx->mdsthreshold);
kfree(ctx);
}
diff --git a/fs/nfs/internal.h b/fs/nfs/internal.h
index 59b133c..05521ca 100644
--- a/fs/nfs/internal.h
+++ b/fs/nfs/internal.h
@@ -351,10 +351,12 @@
extern void __exit unregister_nfs_fs(void);
extern void nfs_sb_active(struct super_block *sb);
extern void nfs_sb_deactive(struct super_block *sb);
+extern void nfs_sb_deactive_async(struct super_block *sb);
/* namespace.c */
+#define NFS_PATH_CANONICAL 1
extern char *nfs_path(char **p, struct dentry *dentry,
- char *buffer, ssize_t buflen);
+ char *buffer, ssize_t buflen, unsigned flags);
extern struct vfsmount *nfs_d_automount(struct path *path);
struct vfsmount *nfs_submount(struct nfs_server *, struct dentry *,
struct nfs_fh *, struct nfs_fattr *);
@@ -498,7 +500,7 @@
char *buffer, ssize_t buflen)
{
char *dummy;
- return nfs_path(&dummy, dentry, buffer, buflen);
+ return nfs_path(&dummy, dentry, buffer, buflen, NFS_PATH_CANONICAL);
}
/*
diff --git a/fs/nfs/mount_clnt.c b/fs/nfs/mount_clnt.c
index 8e65c7f..015f71f 100644
--- a/fs/nfs/mount_clnt.c
+++ b/fs/nfs/mount_clnt.c
@@ -181,7 +181,7 @@
else
msg.rpc_proc = &mnt_clnt->cl_procinfo[MOUNTPROC_MNT];
- status = rpc_call_sync(mnt_clnt, &msg, 0);
+ status = rpc_call_sync(mnt_clnt, &msg, RPC_TASK_SOFT|RPC_TASK_TIMEOUT);
rpc_shutdown_client(mnt_clnt);
if (status < 0)
diff --git a/fs/nfs/namespace.c b/fs/nfs/namespace.c
index 6559253..dd057bc 100644
--- a/fs/nfs/namespace.c
+++ b/fs/nfs/namespace.c
@@ -33,6 +33,7 @@
* @dentry - pointer to dentry
* @buffer - result buffer
* @buflen - length of buffer
+ * @flags - options (see below)
*
* Helper function for constructing the server pathname
* by arbitrary hashed dentry.
@@ -40,8 +41,14 @@
* This is mainly for use in figuring out the path on the
* server side when automounting on top of an existing partition
* and in generating /proc/mounts and friends.
+ *
+ * Supported flags:
+ * NFS_PATH_CANONICAL: ensure there is exactly one slash after
+ * the original device (export) name
+ * (if unset, the original name is returned verbatim)
*/
-char *nfs_path(char **p, struct dentry *dentry, char *buffer, ssize_t buflen)
+char *nfs_path(char **p, struct dentry *dentry, char *buffer, ssize_t buflen,
+ unsigned flags)
{
char *end;
int namelen;
@@ -74,7 +81,7 @@
rcu_read_unlock();
goto rename_retry;
}
- if (*end != '/') {
+ if ((flags & NFS_PATH_CANONICAL) && *end != '/') {
if (--buflen < 0) {
spin_unlock(&dentry->d_lock);
rcu_read_unlock();
@@ -91,9 +98,11 @@
return end;
}
namelen = strlen(base);
- /* Strip off excess slashes in base string */
- while (namelen > 0 && base[namelen - 1] == '/')
- namelen--;
+ if (flags & NFS_PATH_CANONICAL) {
+ /* Strip off excess slashes in base string */
+ while (namelen > 0 && base[namelen - 1] == '/')
+ namelen--;
+ }
buflen -= namelen;
if (buflen < 0) {
spin_unlock(&dentry->d_lock);
diff --git a/fs/nfs/nfs4filelayout.c b/fs/nfs/nfs4filelayout.c
index 52d8472..2e45fd9 100644
--- a/fs/nfs/nfs4filelayout.c
+++ b/fs/nfs/nfs4filelayout.c
@@ -122,12 +122,21 @@
}
}
+static void filelayout_fenceme(struct inode *inode, struct pnfs_layout_hdr *lo)
+{
+ if (!test_and_clear_bit(NFS_LAYOUT_RETURN, &lo->plh_flags))
+ return;
+ clear_bit(NFS_INO_LAYOUTCOMMIT, &NFS_I(inode)->flags);
+ pnfs_return_layout(inode);
+}
+
static int filelayout_async_handle_error(struct rpc_task *task,
struct nfs4_state *state,
struct nfs_client *clp,
struct pnfs_layout_segment *lseg)
{
- struct inode *inode = lseg->pls_layout->plh_inode;
+ struct pnfs_layout_hdr *lo = lseg->pls_layout;
+ struct inode *inode = lo->plh_inode;
struct nfs_server *mds_server = NFS_SERVER(inode);
struct nfs4_deviceid_node *devid = FILELAYOUT_DEVID_NODE(lseg);
struct nfs_client *mds_client = mds_server->nfs_client;
@@ -204,10 +213,8 @@
dprintk("%s DS connection error %d\n", __func__,
task->tk_status);
nfs4_mark_deviceid_unavailable(devid);
- clear_bit(NFS_INO_LAYOUTCOMMIT, &NFS_I(inode)->flags);
- _pnfs_return_layout(inode);
+ set_bit(NFS_LAYOUT_RETURN, &lo->plh_flags);
rpc_wake_up(&tbl->slot_tbl_waitq);
- nfs4_ds_disconnect(clp);
/* fall through */
default:
reset:
@@ -331,7 +338,9 @@
static void filelayout_read_release(void *data)
{
struct nfs_read_data *rdata = data;
+ struct pnfs_layout_hdr *lo = rdata->header->lseg->pls_layout;
+ filelayout_fenceme(lo->plh_inode, lo);
nfs_put_client(rdata->ds_clp);
rdata->header->mds_ops->rpc_release(data);
}
@@ -429,7 +438,9 @@
static void filelayout_write_release(void *data)
{
struct nfs_write_data *wdata = data;
+ struct pnfs_layout_hdr *lo = wdata->header->lseg->pls_layout;
+ filelayout_fenceme(lo->plh_inode, lo);
nfs_put_client(wdata->ds_clp);
wdata->header->mds_ops->rpc_release(data);
}
@@ -739,7 +750,7 @@
goto out_err;
if (fl->num_fh > 0) {
- fl->fh_array = kzalloc(fl->num_fh * sizeof(struct nfs_fh *),
+ fl->fh_array = kcalloc(fl->num_fh, sizeof(fl->fh_array[0]),
gfp_flags);
if (!fl->fh_array)
goto out_err;
diff --git a/fs/nfs/nfs4filelayout.h b/fs/nfs/nfs4filelayout.h
index dca47d78..8c07241 100644
--- a/fs/nfs/nfs4filelayout.h
+++ b/fs/nfs/nfs4filelayout.h
@@ -149,6 +149,5 @@
extern void nfs4_fl_free_deviceid(struct nfs4_file_layout_dsaddr *dsaddr);
struct nfs4_file_layout_dsaddr *
filelayout_get_device_info(struct inode *inode, struct nfs4_deviceid *dev_id, gfp_t gfp_flags);
-void nfs4_ds_disconnect(struct nfs_client *clp);
#endif /* FS_NFS_NFS4FILELAYOUT_H */
diff --git a/fs/nfs/nfs4filelayoutdev.c b/fs/nfs/nfs4filelayoutdev.c
index 3336d5e..a8eaa9b 100644
--- a/fs/nfs/nfs4filelayoutdev.c
+++ b/fs/nfs/nfs4filelayoutdev.c
@@ -149,28 +149,6 @@
}
/*
- * Lookup DS by nfs_client pointer. Zero data server client pointer
- */
-void nfs4_ds_disconnect(struct nfs_client *clp)
-{
- struct nfs4_pnfs_ds *ds;
- struct nfs_client *found = NULL;
-
- dprintk("%s clp %p\n", __func__, clp);
- spin_lock(&nfs4_ds_cache_lock);
- list_for_each_entry(ds, &nfs4_data_server_cache, ds_node)
- if (ds->ds_clp && ds->ds_clp == clp) {
- found = ds->ds_clp;
- ds->ds_clp = NULL;
- }
- spin_unlock(&nfs4_ds_cache_lock);
- if (found) {
- set_bit(NFS_CS_STOP_RENEW, &clp->cl_res_state);
- nfs_put_client(clp);
- }
-}
-
-/*
* Create an rpc connection to the nfs4_pnfs_ds data server
* Currently only supports IPv4 and IPv6 addresses
*/
diff --git a/fs/nfs/nfs4getroot.c b/fs/nfs/nfs4getroot.c
index 6a83780..549462e 100644
--- a/fs/nfs/nfs4getroot.c
+++ b/fs/nfs/nfs4getroot.c
@@ -5,6 +5,7 @@
#include <linux/nfs_fs.h>
#include "nfs4_fs.h"
+#include "internal.h"
#define NFSDBG_FACILITY NFSDBG_CLIENT
diff --git a/fs/nfs/nfs4namespace.c b/fs/nfs/nfs4namespace.c
index 79fbb61..1e09eb7 100644
--- a/fs/nfs/nfs4namespace.c
+++ b/fs/nfs/nfs4namespace.c
@@ -81,7 +81,8 @@
static char *nfs4_path(struct dentry *dentry, char *buffer, ssize_t buflen)
{
char *limit;
- char *path = nfs_path(&limit, dentry, buffer, buflen);
+ char *path = nfs_path(&limit, dentry, buffer, buflen,
+ NFS_PATH_CANONICAL);
if (!IS_ERR(path)) {
char *path_component = nfs_path_component(path, limit);
if (path_component)
diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index 68b21d8..5eec442 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -339,8 +339,7 @@
dprintk("%s ERROR: %d Reset session\n", __func__,
errorcode);
nfs4_schedule_session_recovery(clp->cl_session, errorcode);
- exception->retry = 1;
- break;
+ goto wait_on_recovery;
#endif /* defined(CONFIG_NFS_V4_1) */
case -NFS4ERR_FILE_OPEN:
if (exception->timeout > HZ) {
@@ -1572,9 +1571,11 @@
data->timestamp = jiffies;
if (nfs4_setup_sequence(data->o_arg.server,
&data->o_arg.seq_args,
- &data->o_res.seq_res, task))
- return;
- rpc_call_start(task);
+ &data->o_res.seq_res,
+ task) != 0)
+ nfs_release_seqid(data->o_arg.seqid);
+ else
+ rpc_call_start(task);
return;
unlock_no_action:
rcu_read_unlock();
@@ -1748,7 +1749,7 @@
/* even though OPEN succeeded, access is denied. Close the file */
nfs4_close_state(state, fmode);
- return -NFS4ERR_ACCESS;
+ return -EACCES;
}
/*
@@ -2196,7 +2197,7 @@
nfs4_put_open_state(calldata->state);
nfs_free_seqid(calldata->arg.seqid);
nfs4_put_state_owner(sp);
- nfs_sb_deactive(sb);
+ nfs_sb_deactive_async(sb);
kfree(calldata);
}
@@ -2296,9 +2297,10 @@
if (nfs4_setup_sequence(NFS_SERVER(inode),
&calldata->arg.seq_args,
&calldata->res.seq_res,
- task))
- goto out;
- rpc_call_start(task);
+ task) != 0)
+ nfs_release_seqid(calldata->arg.seqid);
+ else
+ rpc_call_start(task);
out:
dprintk("%s: done!\n", __func__);
}
@@ -4529,6 +4531,7 @@
if (nfs4_async_handle_error(task, calldata->server, NULL) == -EAGAIN)
rpc_restart_call_prepare(task);
}
+ nfs_release_seqid(calldata->arg.seqid);
}
static void nfs4_locku_prepare(struct rpc_task *task, void *data)
@@ -4545,9 +4548,11 @@
calldata->timestamp = jiffies;
if (nfs4_setup_sequence(calldata->server,
&calldata->arg.seq_args,
- &calldata->res.seq_res, task))
- return;
- rpc_call_start(task);
+ &calldata->res.seq_res,
+ task) != 0)
+ nfs_release_seqid(calldata->arg.seqid);
+ else
+ rpc_call_start(task);
}
static const struct rpc_call_ops nfs4_locku_ops = {
@@ -4692,7 +4697,7 @@
/* Do we need to do an open_to_lock_owner? */
if (!(data->arg.lock_seqid->sequence->flags & NFS_SEQID_CONFIRMED)) {
if (nfs_wait_on_sequence(data->arg.open_seqid, task) != 0)
- return;
+ goto out_release_lock_seqid;
data->arg.open_stateid = &state->stateid;
data->arg.new_lock_owner = 1;
data->res.open_seqid = data->arg.open_seqid;
@@ -4701,10 +4706,15 @@
data->timestamp = jiffies;
if (nfs4_setup_sequence(data->server,
&data->arg.seq_args,
- &data->res.seq_res, task))
+ &data->res.seq_res,
+ task) == 0) {
+ rpc_call_start(task);
return;
- rpc_call_start(task);
- dprintk("%s: done!, ret = %d\n", __func__, data->rpc_status);
+ }
+ nfs_release_seqid(data->arg.open_seqid);
+out_release_lock_seqid:
+ nfs_release_seqid(data->arg.lock_seqid);
+ dprintk("%s: done!, ret = %d\n", __func__, task->tk_status);
}
static void nfs4_recover_lock_prepare(struct rpc_task *task, void *calldata)
@@ -5667,7 +5677,7 @@
tbl->slots = new;
tbl->max_slots = max_slots;
}
- tbl->highest_used_slotid = -1; /* no slot is currently used */
+ tbl->highest_used_slotid = NFS4_NO_SLOT;
for (i = 0; i < tbl->max_slots; i++)
tbl->slots[i].seq_nr = ivalue;
spin_unlock(&tbl->slot_tbl_lock);
diff --git a/fs/nfs/objlayout/objio_osd.c b/fs/nfs/objlayout/objio_osd.c
index be731e6..c6f9906 100644
--- a/fs/nfs/objlayout/objio_osd.c
+++ b/fs/nfs/objlayout/objio_osd.c
@@ -369,7 +369,7 @@
kfree(objios);
}
-enum pnfs_osd_errno osd_pri_2_pnfs_err(enum osd_err_priority oep)
+static enum pnfs_osd_errno osd_pri_2_pnfs_err(enum osd_err_priority oep)
{
switch (oep) {
case OSD_ERR_PRI_NO_ERROR:
@@ -574,7 +574,7 @@
(unsigned long)pgio->pg_layout_private;
}
-void objio_init_read(struct nfs_pageio_descriptor *pgio, struct nfs_page *req)
+static void objio_init_read(struct nfs_pageio_descriptor *pgio, struct nfs_page *req)
{
pnfs_generic_pg_init_read(pgio, req);
if (unlikely(pgio->pg_lseg == NULL))
@@ -604,7 +604,7 @@
return false;
}
-void objio_init_write(struct nfs_pageio_descriptor *pgio, struct nfs_page *req)
+static void objio_init_write(struct nfs_pageio_descriptor *pgio, struct nfs_page *req)
{
unsigned long stripe_end = 0;
u64 wb_size;
diff --git a/fs/nfs/pnfs.c b/fs/nfs/pnfs.c
index fe624c9..2878f97 100644
--- a/fs/nfs/pnfs.c
+++ b/fs/nfs/pnfs.c
@@ -925,8 +925,8 @@
if (likely(nfsi->layout == NULL)) { /* Won the race? */
nfsi->layout = new;
return new;
- }
- pnfs_free_layout_hdr(new);
+ } else if (new != NULL)
+ pnfs_free_layout_hdr(new);
out_existing:
pnfs_get_layout_hdr(nfsi->layout);
return nfsi->layout;
diff --git a/fs/nfs/pnfs.h b/fs/nfs/pnfs.h
index 2d722db..dbf7bba 100644
--- a/fs/nfs/pnfs.h
+++ b/fs/nfs/pnfs.h
@@ -62,6 +62,7 @@
NFS_LAYOUT_RW_FAILED, /* get rw layout failed stop trying */
NFS_LAYOUT_BULK_RECALL, /* bulk recall affecting layout */
NFS_LAYOUT_ROC, /* some lseg had roc bit set */
+ NFS_LAYOUT_RETURN, /* Return this layout ASAP */
};
enum layoutdriver_policy_flags {
diff --git a/fs/nfs/super.c b/fs/nfs/super.c
index e831bce..652d3f7 100644
--- a/fs/nfs/super.c
+++ b/fs/nfs/super.c
@@ -54,6 +54,7 @@
#include <linux/parser.h>
#include <linux/nsproxy.h>
#include <linux/rcupdate.h>
+#include <linux/kthread.h>
#include <asm/uaccess.h>
@@ -415,6 +416,54 @@
}
EXPORT_SYMBOL_GPL(nfs_sb_deactive);
+static int nfs_deactivate_super_async_work(void *ptr)
+{
+ struct super_block *sb = ptr;
+
+ deactivate_super(sb);
+ module_put_and_exit(0);
+ return 0;
+}
+
+/*
+ * same effect as deactivate_super, but will do final unmount in kthread
+ * context
+ */
+static void nfs_deactivate_super_async(struct super_block *sb)
+{
+ struct task_struct *task;
+ char buf[INET6_ADDRSTRLEN + 1];
+ struct nfs_server *server = NFS_SB(sb);
+ struct nfs_client *clp = server->nfs_client;
+
+ if (!atomic_add_unless(&sb->s_active, -1, 1)) {
+ rcu_read_lock();
+ snprintf(buf, sizeof(buf),
+ rpc_peeraddr2str(clp->cl_rpcclient, RPC_DISPLAY_ADDR));
+ rcu_read_unlock();
+
+ __module_get(THIS_MODULE);
+ task = kthread_run(nfs_deactivate_super_async_work, sb,
+ "%s-deactivate-super", buf);
+ if (IS_ERR(task)) {
+ pr_err("%s: kthread_run: %ld\n",
+ __func__, PTR_ERR(task));
+ /* make synchronous call and hope for the best */
+ deactivate_super(sb);
+ module_put(THIS_MODULE);
+ }
+ }
+}
+
+void nfs_sb_deactive_async(struct super_block *sb)
+{
+ struct nfs_server *server = NFS_SB(sb);
+
+ if (atomic_dec_and_test(&server->active))
+ nfs_deactivate_super_async(sb);
+}
+EXPORT_SYMBOL_GPL(nfs_sb_deactive_async);
+
/*
* Deliver file system statistics to userspace
*/
@@ -771,7 +820,7 @@
int err = 0;
if (!page)
return -ENOMEM;
- devname = nfs_path(&dummy, root, page, PAGE_SIZE);
+ devname = nfs_path(&dummy, root, page, PAGE_SIZE, 0);
if (IS_ERR(devname))
err = PTR_ERR(devname);
else
diff --git a/fs/nfs/unlink.c b/fs/nfs/unlink.c
index 13cea63..3f79c77 100644
--- a/fs/nfs/unlink.c
+++ b/fs/nfs/unlink.c
@@ -95,7 +95,7 @@
nfs_dec_sillycount(data->dir);
nfs_free_unlinkdata(data);
- nfs_sb_deactive(sb);
+ nfs_sb_deactive_async(sb);
}
static void nfs_unlink_prepare(struct rpc_task *task, void *calldata)
diff --git a/fs/notify/fanotify/fanotify.c b/fs/notify/fanotify/fanotify.c
index f35794b..a506360 100644
--- a/fs/notify/fanotify/fanotify.c
+++ b/fs/notify/fanotify/fanotify.c
@@ -21,6 +21,7 @@
if ((old->path.mnt == new->path.mnt) &&
(old->path.dentry == new->path.dentry))
return true;
+ break;
case (FSNOTIFY_EVENT_NONE):
return true;
default:
diff --git a/fs/notify/fanotify/fanotify_user.c b/fs/notify/fanotify/fanotify_user.c
index 721d692..6fcaeb8 100644
--- a/fs/notify/fanotify/fanotify_user.c
+++ b/fs/notify/fanotify/fanotify_user.c
@@ -258,7 +258,8 @@
if (ret)
goto out_close_fd;
- fd_install(fd, f);
+ if (fd != FAN_NOFD)
+ fd_install(fd, f);
return fanotify_event_metadata.event_len;
out_close_fd:
diff --git a/fs/proc/base.c b/fs/proc/base.c
index 144a967..3c231ad 100644
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -873,6 +873,113 @@
.release = mem_release,
};
+static ssize_t oom_adj_read(struct file *file, char __user *buf, size_t count,
+ loff_t *ppos)
+{
+ struct task_struct *task = get_proc_task(file->f_path.dentry->d_inode);
+ char buffer[PROC_NUMBUF];
+ int oom_adj = OOM_ADJUST_MIN;
+ size_t len;
+ unsigned long flags;
+
+ if (!task)
+ return -ESRCH;
+ if (lock_task_sighand(task, &flags)) {
+ if (task->signal->oom_score_adj == OOM_SCORE_ADJ_MAX)
+ oom_adj = OOM_ADJUST_MAX;
+ else
+ oom_adj = (task->signal->oom_score_adj * -OOM_DISABLE) /
+ OOM_SCORE_ADJ_MAX;
+ unlock_task_sighand(task, &flags);
+ }
+ put_task_struct(task);
+ len = snprintf(buffer, sizeof(buffer), "%d\n", oom_adj);
+ return simple_read_from_buffer(buf, count, ppos, buffer, len);
+}
+
+static ssize_t oom_adj_write(struct file *file, const char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ struct task_struct *task;
+ char buffer[PROC_NUMBUF];
+ int oom_adj;
+ unsigned long flags;
+ int err;
+
+ memset(buffer, 0, sizeof(buffer));
+ if (count > sizeof(buffer) - 1)
+ count = sizeof(buffer) - 1;
+ if (copy_from_user(buffer, buf, count)) {
+ err = -EFAULT;
+ goto out;
+ }
+
+ err = kstrtoint(strstrip(buffer), 0, &oom_adj);
+ if (err)
+ goto out;
+ if ((oom_adj < OOM_ADJUST_MIN || oom_adj > OOM_ADJUST_MAX) &&
+ oom_adj != OOM_DISABLE) {
+ err = -EINVAL;
+ goto out;
+ }
+
+ task = get_proc_task(file->f_path.dentry->d_inode);
+ if (!task) {
+ err = -ESRCH;
+ goto out;
+ }
+
+ task_lock(task);
+ if (!task->mm) {
+ err = -EINVAL;
+ goto err_task_lock;
+ }
+
+ if (!lock_task_sighand(task, &flags)) {
+ err = -ESRCH;
+ goto err_task_lock;
+ }
+
+ /*
+ * Scale /proc/pid/oom_score_adj appropriately ensuring that a maximum
+ * value is always attainable.
+ */
+ if (oom_adj == OOM_ADJUST_MAX)
+ oom_adj = OOM_SCORE_ADJ_MAX;
+ else
+ oom_adj = (oom_adj * OOM_SCORE_ADJ_MAX) / -OOM_DISABLE;
+
+ if (oom_adj < task->signal->oom_score_adj &&
+ !capable(CAP_SYS_RESOURCE)) {
+ err = -EACCES;
+ goto err_sighand;
+ }
+
+ /*
+ * /proc/pid/oom_adj is provided for legacy purposes, ask users to use
+ * /proc/pid/oom_score_adj instead.
+ */
+ printk_once(KERN_WARNING "%s (%d): /proc/%d/oom_adj is deprecated, please use /proc/%d/oom_score_adj instead.\n",
+ current->comm, task_pid_nr(current), task_pid_nr(task),
+ task_pid_nr(task));
+
+ task->signal->oom_score_adj = oom_adj;
+ trace_oom_score_adj_update(task);
+err_sighand:
+ unlock_task_sighand(task, &flags);
+err_task_lock:
+ task_unlock(task);
+ put_task_struct(task);
+out:
+ return err < 0 ? err : count;
+}
+
+static const struct file_operations proc_oom_adj_operations = {
+ .read = oom_adj_read,
+ .write = oom_adj_write,
+ .llseek = generic_file_llseek,
+};
+
static ssize_t oom_score_adj_read(struct file *file, char __user *buf,
size_t count, loff_t *ppos)
{
@@ -2598,6 +2705,7 @@
REG("cgroup", S_IRUGO, proc_cgroup_operations),
#endif
INF("oom_score", S_IRUGO, proc_oom_score),
+ REG("oom_adj", S_IRUGO|S_IWUSR, proc_oom_adj_operations),
REG("oom_score_adj", S_IRUGO|S_IWUSR, proc_oom_score_adj_operations),
#ifdef CONFIG_AUDITSYSCALL
REG("loginuid", S_IWUSR|S_IRUGO, proc_loginuid_operations),
@@ -2964,6 +3072,7 @@
REG("cgroup", S_IRUGO, proc_cgroup_operations),
#endif
INF("oom_score", S_IRUGO, proc_oom_score),
+ REG("oom_adj", S_IRUGO|S_IWUSR, proc_oom_adj_operations),
REG("oom_score_adj", S_IRUGO|S_IWUSR, proc_oom_score_adj_operations),
#ifdef CONFIG_AUDITSYSCALL
REG("loginuid", S_IWUSR|S_IRUGO, proc_loginuid_operations),
diff --git a/fs/proc/stat.c b/fs/proc/stat.c
index 64c3b31..e296572 100644
--- a/fs/proc/stat.c
+++ b/fs/proc/stat.c
@@ -45,10 +45,13 @@
static u64 get_idle_time(int cpu)
{
- u64 idle, idle_time = get_cpu_idle_time_us(cpu, NULL);
+ u64 idle, idle_time = -1ULL;
+
+ if (cpu_online(cpu))
+ idle_time = get_cpu_idle_time_us(cpu, NULL);
if (idle_time == -1ULL)
- /* !NO_HZ so we can rely on cpustat.idle */
+ /* !NO_HZ or cpu offline so we can rely on cpustat.idle */
idle = kcpustat_cpu(cpu).cpustat[CPUTIME_IDLE];
else
idle = usecs_to_cputime64(idle_time);
@@ -58,10 +61,13 @@
static u64 get_iowait_time(int cpu)
{
- u64 iowait, iowait_time = get_cpu_iowait_time_us(cpu, NULL);
+ u64 iowait, iowait_time = -1ULL;
+
+ if (cpu_online(cpu))
+ iowait_time = get_cpu_iowait_time_us(cpu, NULL);
if (iowait_time == -1ULL)
- /* !NO_HZ so we can rely on cpustat.iowait */
+ /* !NO_HZ or cpu offline so we can rely on cpustat.iowait */
iowait = kcpustat_cpu(cpu).cpustat[CPUTIME_IOWAIT];
else
iowait = usecs_to_cputime64(iowait_time);
diff --git a/fs/pstore/platform.c b/fs/pstore/platform.c
index a40da07..947fbe0 100644
--- a/fs/pstore/platform.c
+++ b/fs/pstore/platform.c
@@ -161,6 +161,7 @@
while (s < e) {
unsigned long flags;
+ u64 id;
if (c > psinfo->bufsize)
c = psinfo->bufsize;
@@ -172,7 +173,7 @@
spin_lock_irqsave(&psinfo->buf_lock, flags);
}
memcpy(psinfo->buf, s, c);
- psinfo->write(PSTORE_TYPE_CONSOLE, 0, NULL, 0, c, psinfo);
+ psinfo->write(PSTORE_TYPE_CONSOLE, 0, &id, 0, c, psinfo);
spin_unlock_irqrestore(&psinfo->buf_lock, flags);
s += c;
c = e - s;
diff --git a/fs/reiserfs/inode.c b/fs/reiserfs/inode.c
index f27f01a..d83736f 100644
--- a/fs/reiserfs/inode.c
+++ b/fs/reiserfs/inode.c
@@ -1782,8 +1782,9 @@
BUG_ON(!th->t_trans_id);
- dquot_initialize(inode);
+ reiserfs_write_unlock(inode->i_sb);
err = dquot_alloc_inode(inode);
+ reiserfs_write_lock(inode->i_sb);
if (err)
goto out_end_trans;
if (!dir->i_nlink) {
@@ -1979,8 +1980,10 @@
out_end_trans:
journal_end(th, th->t_super, th->t_blocks_allocated);
+ reiserfs_write_unlock(inode->i_sb);
/* Drop can be outside and it needs more credits so it's better to have it outside */
dquot_drop(inode);
+ reiserfs_write_lock(inode->i_sb);
inode->i_flags |= S_NOQUOTA;
make_bad_inode(inode);
@@ -3103,10 +3106,9 @@
/* must be turned off for recursive notify_change calls */
ia_valid = attr->ia_valid &= ~(ATTR_KILL_SUID|ATTR_KILL_SGID);
- depth = reiserfs_write_lock_once(inode->i_sb);
if (is_quota_modification(inode, attr))
dquot_initialize(inode);
-
+ depth = reiserfs_write_lock_once(inode->i_sb);
if (attr->ia_valid & ATTR_SIZE) {
/* version 2 items will be caught by the s_maxbytes check
** done for us in vmtruncate
@@ -3170,7 +3172,9 @@
error = journal_begin(&th, inode->i_sb, jbegin_count);
if (error)
goto out;
+ reiserfs_write_unlock_once(inode->i_sb, depth);
error = dquot_transfer(inode, attr);
+ depth = reiserfs_write_lock_once(inode->i_sb);
if (error) {
journal_end(&th, inode->i_sb, jbegin_count);
goto out;
diff --git a/fs/reiserfs/stree.c b/fs/reiserfs/stree.c
index f8afa4b..2f40a4c 100644
--- a/fs/reiserfs/stree.c
+++ b/fs/reiserfs/stree.c
@@ -1968,7 +1968,9 @@
key2type(&(key->on_disk_key)));
#endif
+ reiserfs_write_unlock(inode->i_sb);
retval = dquot_alloc_space_nodirty(inode, pasted_size);
+ reiserfs_write_lock(inode->i_sb);
if (retval) {
pathrelse(search_path);
return retval;
@@ -2061,9 +2063,11 @@
"reiserquota insert_item(): allocating %u id=%u type=%c",
quota_bytes, inode->i_uid, head2type(ih));
#endif
+ reiserfs_write_unlock(inode->i_sb);
/* We can't dirty inode here. It would be immediately written but
* appropriate stat item isn't inserted yet... */
retval = dquot_alloc_space_nodirty(inode, quota_bytes);
+ reiserfs_write_lock(inode->i_sb);
if (retval) {
pathrelse(path);
return retval;
diff --git a/fs/reiserfs/super.c b/fs/reiserfs/super.c
index 1078ae1..418bdc3 100644
--- a/fs/reiserfs/super.c
+++ b/fs/reiserfs/super.c
@@ -298,7 +298,9 @@
retval = remove_save_link_only(s, &save_link_key, 0);
continue;
}
+ reiserfs_write_unlock(s);
dquot_initialize(inode);
+ reiserfs_write_lock(s);
if (truncate && S_ISDIR(inode->i_mode)) {
/* We got a truncate request for a dir which is impossible.
@@ -1335,7 +1337,7 @@
kfree(qf_names[i]);
#endif
err = -EINVAL;
- goto out_err;
+ goto out_unlock;
}
#ifdef CONFIG_QUOTA
handle_quota_files(s, qf_names, &qfmt);
@@ -1379,7 +1381,7 @@
if (blocks) {
err = reiserfs_resize(s, blocks);
if (err != 0)
- goto out_err;
+ goto out_unlock;
}
if (*mount_flags & MS_RDONLY) {
@@ -1389,9 +1391,15 @@
/* it is read-only already */
goto out_ok;
+ /*
+ * Drop write lock. Quota will retake it when needed and lock
+ * ordering requires calling dquot_suspend() without it.
+ */
+ reiserfs_write_unlock(s);
err = dquot_suspend(s, -1);
if (err < 0)
goto out_err;
+ reiserfs_write_lock(s);
/* try to remount file system with read-only permissions */
if (sb_umount_state(rs) == REISERFS_VALID_FS
@@ -1401,7 +1409,7 @@
err = journal_begin(&th, s, 10);
if (err)
- goto out_err;
+ goto out_unlock;
/* Mounting a rw partition read-only. */
reiserfs_prepare_for_journal(s, SB_BUFFER_WITH_SB(s), 1);
@@ -1416,7 +1424,7 @@
if (reiserfs_is_journal_aborted(journal)) {
err = journal->j_errno;
- goto out_err;
+ goto out_unlock;
}
handle_data_mode(s, mount_options);
@@ -1425,7 +1433,7 @@
s->s_flags &= ~MS_RDONLY; /* now it is safe to call journal_begin */
err = journal_begin(&th, s, 10);
if (err)
- goto out_err;
+ goto out_unlock;
/* Mount a partition which is read-only, read-write */
reiserfs_prepare_for_journal(s, SB_BUFFER_WITH_SB(s), 1);
@@ -1442,10 +1450,16 @@
SB_JOURNAL(s)->j_must_wait = 1;
err = journal_end(&th, s, 10);
if (err)
- goto out_err;
+ goto out_unlock;
if (!(*mount_flags & MS_RDONLY)) {
+ /*
+ * Drop write lock. Quota will retake it when needed and lock
+ * ordering requires calling dquot_resume() without it.
+ */
+ reiserfs_write_unlock(s);
dquot_resume(s, -1);
+ reiserfs_write_lock(s);
finish_unfinished(s);
reiserfs_xattr_init(s, *mount_flags);
}
@@ -1455,9 +1469,10 @@
reiserfs_write_unlock(s);
return 0;
+out_unlock:
+ reiserfs_write_unlock(s);
out_err:
kfree(new_opts);
- reiserfs_write_unlock(s);
return err;
}
@@ -2095,13 +2110,15 @@
REISERFS_QUOTA_TRANS_BLOCKS(dquot->dq_sb));
if (ret)
goto out;
+ reiserfs_write_unlock(dquot->dq_sb);
ret = dquot_commit(dquot);
+ reiserfs_write_lock(dquot->dq_sb);
err =
journal_end(&th, dquot->dq_sb,
REISERFS_QUOTA_TRANS_BLOCKS(dquot->dq_sb));
if (!ret && err)
ret = err;
- out:
+out:
reiserfs_write_unlock(dquot->dq_sb);
return ret;
}
@@ -2117,13 +2134,15 @@
REISERFS_QUOTA_INIT_BLOCKS(dquot->dq_sb));
if (ret)
goto out;
+ reiserfs_write_unlock(dquot->dq_sb);
ret = dquot_acquire(dquot);
+ reiserfs_write_lock(dquot->dq_sb);
err =
journal_end(&th, dquot->dq_sb,
REISERFS_QUOTA_INIT_BLOCKS(dquot->dq_sb));
if (!ret && err)
ret = err;
- out:
+out:
reiserfs_write_unlock(dquot->dq_sb);
return ret;
}
@@ -2137,19 +2156,21 @@
ret =
journal_begin(&th, dquot->dq_sb,
REISERFS_QUOTA_DEL_BLOCKS(dquot->dq_sb));
+ reiserfs_write_unlock(dquot->dq_sb);
if (ret) {
/* Release dquot anyway to avoid endless cycle in dqput() */
dquot_release(dquot);
goto out;
}
ret = dquot_release(dquot);
+ reiserfs_write_lock(dquot->dq_sb);
err =
journal_end(&th, dquot->dq_sb,
REISERFS_QUOTA_DEL_BLOCKS(dquot->dq_sb));
if (!ret && err)
ret = err;
- out:
reiserfs_write_unlock(dquot->dq_sb);
+out:
return ret;
}
@@ -2174,11 +2195,13 @@
ret = journal_begin(&th, sb, 2);
if (ret)
goto out;
+ reiserfs_write_unlock(sb);
ret = dquot_commit_info(sb, type);
+ reiserfs_write_lock(sb);
err = journal_end(&th, sb, 2);
if (!ret && err)
ret = err;
- out:
+out:
reiserfs_write_unlock(sb);
return ret;
}
@@ -2203,8 +2226,11 @@
struct reiserfs_transaction_handle th;
int opt = type == USRQUOTA ? REISERFS_USRQUOTA : REISERFS_GRPQUOTA;
- if (!(REISERFS_SB(sb)->s_mount_opt & (1 << opt)))
- return -EINVAL;
+ reiserfs_write_lock(sb);
+ if (!(REISERFS_SB(sb)->s_mount_opt & (1 << opt))) {
+ err = -EINVAL;
+ goto out;
+ }
/* Quotafile not on the same filesystem? */
if (path->dentry->d_sb != sb) {
@@ -2246,8 +2272,10 @@
if (err)
goto out;
}
- err = dquot_quota_on(sb, type, format_id, path);
+ reiserfs_write_unlock(sb);
+ return dquot_quota_on(sb, type, format_id, path);
out:
+ reiserfs_write_unlock(sb);
return err;
}
@@ -2320,7 +2348,9 @@
tocopy = sb->s_blocksize - offset < towrite ?
sb->s_blocksize - offset : towrite;
tmp_bh.b_state = 0;
+ reiserfs_write_lock(sb);
err = reiserfs_get_block(inode, blk, &tmp_bh, GET_BLOCK_CREATE);
+ reiserfs_write_unlock(sb);
if (err)
goto out;
if (offset || tocopy != sb->s_blocksize)
@@ -2336,10 +2366,12 @@
flush_dcache_page(bh->b_page);
set_buffer_uptodate(bh);
unlock_buffer(bh);
+ reiserfs_write_lock(sb);
reiserfs_prepare_for_journal(sb, bh, 1);
journal_mark_dirty(current->journal_info, sb, bh);
if (!journal_quota)
reiserfs_add_ordered_list(inode, bh);
+ reiserfs_write_unlock(sb);
brelse(bh);
offset = 0;
towrite -= tocopy;
diff --git a/fs/sysfs/dir.c b/fs/sysfs/dir.c
index 6b0bb00..2fbdff6 100644
--- a/fs/sysfs/dir.c
+++ b/fs/sysfs/dir.c
@@ -485,20 +485,18 @@
/**
* sysfs_pathname - return full path to sysfs dirent
* @sd: sysfs_dirent whose path we want
- * @path: caller allocated buffer
+ * @path: caller allocated buffer of size PATH_MAX
*
* Gives the name "/" to the sysfs_root entry; any path returned
* is relative to wherever sysfs is mounted.
- *
- * XXX: does no error checking on @path size
*/
static char *sysfs_pathname(struct sysfs_dirent *sd, char *path)
{
if (sd->s_parent) {
sysfs_pathname(sd->s_parent, path);
- strcat(path, "/");
+ strlcat(path, "/", PATH_MAX);
}
- strcat(path, sd->s_name);
+ strlcat(path, sd->s_name, PATH_MAX);
return path;
}
@@ -531,9 +529,11 @@
char *path = kzalloc(PATH_MAX, GFP_KERNEL);
WARN(1, KERN_WARNING
"sysfs: cannot create duplicate filename '%s'\n",
- (path == NULL) ? sd->s_name :
- strcat(strcat(sysfs_pathname(acxt->parent_sd, path), "/"),
- sd->s_name));
+ (path == NULL) ? sd->s_name
+ : (sysfs_pathname(acxt->parent_sd, path),
+ strlcat(path, "/", PATH_MAX),
+ strlcat(path, sd->s_name, PATH_MAX),
+ path));
kfree(path);
}
diff --git a/fs/ubifs/find.c b/fs/ubifs/find.c
index 28ec13a..2dcf3d4 100644
--- a/fs/ubifs/find.c
+++ b/fs/ubifs/find.c
@@ -681,8 +681,16 @@
if (!lprops) {
lprops = ubifs_fast_find_freeable(c);
if (!lprops) {
- ubifs_assert(c->freeable_cnt == 0);
- if (c->lst.empty_lebs - c->lst.taken_empty_lebs > 0) {
+ /*
+ * The first condition means the following: go scan the
+ * LPT if there are uncategorized lprops, which means
+ * there may be freeable LEBs there (UBIFS does not
+ * store the information about freeable LEBs in the
+ * master node).
+ */
+ if (c->in_a_category_cnt != c->main_lebs ||
+ c->lst.empty_lebs - c->lst.taken_empty_lebs > 0) {
+ ubifs_assert(c->freeable_cnt == 0);
lprops = scan_for_leb_for_idx(c);
if (IS_ERR(lprops)) {
err = PTR_ERR(lprops);
diff --git a/fs/ubifs/lprops.c b/fs/ubifs/lprops.c
index e5a2a35..46190a7 100644
--- a/fs/ubifs/lprops.c
+++ b/fs/ubifs/lprops.c
@@ -300,8 +300,11 @@
default:
ubifs_assert(0);
}
+
lprops->flags &= ~LPROPS_CAT_MASK;
lprops->flags |= cat;
+ c->in_a_category_cnt += 1;
+ ubifs_assert(c->in_a_category_cnt <= c->main_lebs);
}
/**
@@ -334,6 +337,9 @@
default:
ubifs_assert(0);
}
+
+ c->in_a_category_cnt -= 1;
+ ubifs_assert(c->in_a_category_cnt >= 0);
}
/**
diff --git a/fs/ubifs/ubifs.h b/fs/ubifs/ubifs.h
index 5486346..d133c27 100644
--- a/fs/ubifs/ubifs.h
+++ b/fs/ubifs/ubifs.h
@@ -1183,6 +1183,8 @@
* @freeable_list: list of freeable non-index LEBs (free + dirty == @leb_size)
* @frdi_idx_list: list of freeable index LEBs (free + dirty == @leb_size)
* @freeable_cnt: number of freeable LEBs in @freeable_list
+ * @in_a_category_cnt: count of lprops which are in a certain category, which
+ * basically meants that they were loaded from the flash
*
* @ltab_lnum: LEB number of LPT's own lprops table
* @ltab_offs: offset of LPT's own lprops table
@@ -1412,6 +1414,7 @@
struct list_head freeable_list;
struct list_head frdi_idx_list;
int freeable_cnt;
+ int in_a_category_cnt;
int ltab_lnum;
int ltab_offs;
diff --git a/fs/xfs/xfs_alloc.c b/fs/xfs/xfs_alloc.c
index 4f33c32..335206a 100644
--- a/fs/xfs/xfs_alloc.c
+++ b/fs/xfs/xfs_alloc.c
@@ -1866,6 +1866,7 @@
/*
* Initialize the args structure.
*/
+ memset(&targs, 0, sizeof(targs));
targs.tp = tp;
targs.mp = mp;
targs.agbp = agbp;
@@ -2207,7 +2208,7 @@
* group or loop over the allocation groups to find the result.
*/
int /* error */
-__xfs_alloc_vextent(
+xfs_alloc_vextent(
xfs_alloc_arg_t *args) /* allocation argument structure */
{
xfs_agblock_t agsize; /* allocation group size */
@@ -2417,46 +2418,6 @@
return error;
}
-static void
-xfs_alloc_vextent_worker(
- struct work_struct *work)
-{
- struct xfs_alloc_arg *args = container_of(work,
- struct xfs_alloc_arg, work);
- unsigned long pflags;
-
- /* we are in a transaction context here */
- current_set_flags_nested(&pflags, PF_FSTRANS);
-
- args->result = __xfs_alloc_vextent(args);
- complete(args->done);
-
- current_restore_flags_nested(&pflags, PF_FSTRANS);
-}
-
-/*
- * Data allocation requests often come in with little stack to work on. Push
- * them off to a worker thread so there is lots of stack to use. Metadata
- * requests, OTOH, are generally from low stack usage paths, so avoid the
- * context switch overhead here.
- */
-int
-xfs_alloc_vextent(
- struct xfs_alloc_arg *args)
-{
- DECLARE_COMPLETION_ONSTACK(done);
-
- if (!args->userdata)
- return __xfs_alloc_vextent(args);
-
-
- args->done = &done;
- INIT_WORK_ONSTACK(&args->work, xfs_alloc_vextent_worker);
- queue_work(xfs_alloc_wq, &args->work);
- wait_for_completion(&done);
- return args->result;
-}
-
/*
* Free an extent.
* Just break up the extent address and hand off to xfs_free_ag_extent
diff --git a/fs/xfs/xfs_alloc.h b/fs/xfs/xfs_alloc.h
index 93be4a6..feacb06 100644
--- a/fs/xfs/xfs_alloc.h
+++ b/fs/xfs/xfs_alloc.h
@@ -120,9 +120,6 @@
char isfl; /* set if is freelist blocks - !acctg */
char userdata; /* set if this is user data */
xfs_fsblock_t firstblock; /* io first block allocated */
- struct completion *done;
- struct work_struct work;
- int result;
} xfs_alloc_arg_t;
/*
diff --git a/fs/xfs/xfs_alloc_btree.c b/fs/xfs/xfs_alloc_btree.c
index f1647ca..f7876c6 100644
--- a/fs/xfs/xfs_alloc_btree.c
+++ b/fs/xfs/xfs_alloc_btree.c
@@ -121,6 +121,8 @@
xfs_extent_busy_insert(cur->bc_tp, be32_to_cpu(agf->agf_seqno), bno, 1,
XFS_EXTENT_BUSY_SKIP_DISCARD);
xfs_trans_agbtree_delta(cur->bc_tp, -1);
+
+ xfs_trans_binval(cur->bc_tp, bp);
return 0;
}
diff --git a/fs/xfs/xfs_aops.c b/fs/xfs/xfs_aops.c
index e562dd4..e57e2da 100644
--- a/fs/xfs/xfs_aops.c
+++ b/fs/xfs/xfs_aops.c
@@ -481,11 +481,17 @@
*
* The fix is two passes across the ioend list - one to start writeback on the
* buffer_heads, and then submit them for I/O on the second pass.
+ *
+ * If @fail is non-zero, it means that we have a situation where some part of
+ * the submission process has failed after we have marked paged for writeback
+ * and unlocked them. In this situation, we need to fail the ioend chain rather
+ * than submit it to IO. This typically only happens on a filesystem shutdown.
*/
STATIC void
xfs_submit_ioend(
struct writeback_control *wbc,
- xfs_ioend_t *ioend)
+ xfs_ioend_t *ioend,
+ int fail)
{
xfs_ioend_t *head = ioend;
xfs_ioend_t *next;
@@ -506,6 +512,18 @@
next = ioend->io_list;
bio = NULL;
+ /*
+ * If we are failing the IO now, just mark the ioend with an
+ * error and finish it. This will run IO completion immediately
+ * as there is only one reference to the ioend at this point in
+ * time.
+ */
+ if (fail) {
+ ioend->io_error = -fail;
+ xfs_finish_ioend(ioend);
+ continue;
+ }
+
for (bh = ioend->io_buffer_head; bh; bh = bh->b_private) {
if (!bio) {
@@ -1060,7 +1078,18 @@
xfs_start_page_writeback(page, 1, count);
- if (ioend && imap_valid) {
+ /* if there is no IO to be submitted for this page, we are done */
+ if (!ioend)
+ return 0;
+
+ ASSERT(iohead);
+
+ /*
+ * Any errors from this point onwards need tobe reported through the IO
+ * completion path as we have marked the initial page as under writeback
+ * and unlocked it.
+ */
+ if (imap_valid) {
xfs_off_t end_index;
end_index = imap.br_startoff + imap.br_blockcount;
@@ -1079,20 +1108,15 @@
wbc, end_index);
}
- if (iohead) {
- /*
- * Reserve log space if we might write beyond the on-disk
- * inode size.
- */
- if (ioend->io_type != XFS_IO_UNWRITTEN &&
- xfs_ioend_is_append(ioend)) {
- err = xfs_setfilesize_trans_alloc(ioend);
- if (err)
- goto error;
- }
- xfs_submit_ioend(wbc, iohead);
- }
+ /*
+ * Reserve log space if we might write beyond the on-disk inode size.
+ */
+ err = 0;
+ if (ioend->io_type != XFS_IO_UNWRITTEN && xfs_ioend_is_append(ioend))
+ err = xfs_setfilesize_trans_alloc(ioend);
+
+ xfs_submit_ioend(wbc, iohead, err);
return 0;
diff --git a/fs/xfs/xfs_attr_leaf.c b/fs/xfs/xfs_attr_leaf.c
index d330111..70eec18 100644
--- a/fs/xfs/xfs_attr_leaf.c
+++ b/fs/xfs/xfs_attr_leaf.c
@@ -1291,6 +1291,7 @@
leaf2 = blk2->bp->b_addr;
ASSERT(leaf1->hdr.info.magic == cpu_to_be16(XFS_ATTR_LEAF_MAGIC));
ASSERT(leaf2->hdr.info.magic == cpu_to_be16(XFS_ATTR_LEAF_MAGIC));
+ ASSERT(leaf2->hdr.count == 0);
args = state->args;
trace_xfs_attr_leaf_rebalance(args);
@@ -1361,6 +1362,7 @@
* I assert that since all callers pass in an empty
* second buffer, this code should never execute.
*/
+ ASSERT(0);
/*
* Figure the total bytes to be added to the destination leaf.
@@ -1422,10 +1424,24 @@
args->index2 = 0;
args->blkno2 = blk2->blkno;
} else {
+ /*
+ * On a double leaf split, the original attr location
+ * is already stored in blkno2/index2, so don't
+ * overwrite it overwise we corrupt the tree.
+ */
blk2->index = blk1->index
- be16_to_cpu(leaf1->hdr.count);
- args->index = args->index2 = blk2->index;
- args->blkno = args->blkno2 = blk2->blkno;
+ args->index = blk2->index;
+ args->blkno = blk2->blkno;
+ if (!state->extravalid) {
+ /*
+ * set the new attr location to match the old
+ * one and let the higher level split code
+ * decide where in the leaf to place it.
+ */
+ args->index2 = blk2->index;
+ args->blkno2 = blk2->blkno;
+ }
}
} else {
ASSERT(state->inleaf == 1);
diff --git a/fs/xfs/xfs_bmap.c b/fs/xfs/xfs_bmap.c
index 848ffa77..83d0cf3 100644
--- a/fs/xfs/xfs_bmap.c
+++ b/fs/xfs/xfs_bmap.c
@@ -2437,6 +2437,7 @@
* Normal allocation, done through xfs_alloc_vextent.
*/
tryagain = isaligned = 0;
+ memset(&args, 0, sizeof(args));
args.tp = ap->tp;
args.mp = mp;
args.fsbno = ap->blkno;
@@ -3082,6 +3083,7 @@
* Convert to a btree with two levels, one record in root.
*/
XFS_IFORK_FMT_SET(ip, whichfork, XFS_DINODE_FMT_BTREE);
+ memset(&args, 0, sizeof(args));
args.tp = tp;
args.mp = mp;
args.firstblock = *firstblock;
@@ -3237,6 +3239,7 @@
xfs_buf_t *bp; /* buffer for extent block */
xfs_bmbt_rec_host_t *ep;/* extent record pointer */
+ memset(&args, 0, sizeof(args));
args.tp = tp;
args.mp = ip->i_mount;
args.firstblock = *firstblock;
@@ -4616,12 +4619,11 @@
STATIC int
-xfs_bmapi_allocate(
- struct xfs_bmalloca *bma,
- int flags)
+__xfs_bmapi_allocate(
+ struct xfs_bmalloca *bma)
{
struct xfs_mount *mp = bma->ip->i_mount;
- int whichfork = (flags & XFS_BMAPI_ATTRFORK) ?
+ int whichfork = (bma->flags & XFS_BMAPI_ATTRFORK) ?
XFS_ATTR_FORK : XFS_DATA_FORK;
struct xfs_ifork *ifp = XFS_IFORK_PTR(bma->ip, whichfork);
int tmp_logflags = 0;
@@ -4654,24 +4656,27 @@
* Indicate if this is the first user data in the file, or just any
* user data.
*/
- if (!(flags & XFS_BMAPI_METADATA)) {
+ if (!(bma->flags & XFS_BMAPI_METADATA)) {
bma->userdata = (bma->offset == 0) ?
XFS_ALLOC_INITIAL_USER_DATA : XFS_ALLOC_USERDATA;
}
- bma->minlen = (flags & XFS_BMAPI_CONTIG) ? bma->length : 1;
+ bma->minlen = (bma->flags & XFS_BMAPI_CONTIG) ? bma->length : 1;
/*
* Only want to do the alignment at the eof if it is userdata and
* allocation length is larger than a stripe unit.
*/
if (mp->m_dalign && bma->length >= mp->m_dalign &&
- !(flags & XFS_BMAPI_METADATA) && whichfork == XFS_DATA_FORK) {
+ !(bma->flags & XFS_BMAPI_METADATA) && whichfork == XFS_DATA_FORK) {
error = xfs_bmap_isaeof(bma, whichfork);
if (error)
return error;
}
+ if (bma->flags & XFS_BMAPI_STACK_SWITCH)
+ bma->stack_switch = 1;
+
error = xfs_bmap_alloc(bma);
if (error)
return error;
@@ -4706,7 +4711,7 @@
* A wasdelay extent has been initialized, so shouldn't be flagged
* as unwritten.
*/
- if (!bma->wasdel && (flags & XFS_BMAPI_PREALLOC) &&
+ if (!bma->wasdel && (bma->flags & XFS_BMAPI_PREALLOC) &&
xfs_sb_version_hasextflgbit(&mp->m_sb))
bma->got.br_state = XFS_EXT_UNWRITTEN;
@@ -4734,6 +4739,45 @@
return 0;
}
+static void
+xfs_bmapi_allocate_worker(
+ struct work_struct *work)
+{
+ struct xfs_bmalloca *args = container_of(work,
+ struct xfs_bmalloca, work);
+ unsigned long pflags;
+
+ /* we are in a transaction context here */
+ current_set_flags_nested(&pflags, PF_FSTRANS);
+
+ args->result = __xfs_bmapi_allocate(args);
+ complete(args->done);
+
+ current_restore_flags_nested(&pflags, PF_FSTRANS);
+}
+
+/*
+ * Some allocation requests often come in with little stack to work on. Push
+ * them off to a worker thread so there is lots of stack to use. Otherwise just
+ * call directly to avoid the context switch overhead here.
+ */
+int
+xfs_bmapi_allocate(
+ struct xfs_bmalloca *args)
+{
+ DECLARE_COMPLETION_ONSTACK(done);
+
+ if (!args->stack_switch)
+ return __xfs_bmapi_allocate(args);
+
+
+ args->done = &done;
+ INIT_WORK_ONSTACK(&args->work, xfs_bmapi_allocate_worker);
+ queue_work(xfs_alloc_wq, &args->work);
+ wait_for_completion(&done);
+ return args->result;
+}
+
STATIC int
xfs_bmapi_convert_unwritten(
struct xfs_bmalloca *bma,
@@ -4919,6 +4963,7 @@
bma.conv = !!(flags & XFS_BMAPI_CONVERT);
bma.wasdel = wasdelay;
bma.offset = bno;
+ bma.flags = flags;
/*
* There's a 32/64 bit type mismatch between the
@@ -4934,7 +4979,7 @@
ASSERT(len > 0);
ASSERT(bma.length > 0);
- error = xfs_bmapi_allocate(&bma, flags);
+ error = xfs_bmapi_allocate(&bma);
if (error)
goto error0;
if (bma.blkno == NULLFSBLOCK)
diff --git a/fs/xfs/xfs_bmap.h b/fs/xfs/xfs_bmap.h
index 803b56d..5f469c3 100644
--- a/fs/xfs/xfs_bmap.h
+++ b/fs/xfs/xfs_bmap.h
@@ -77,6 +77,7 @@
* from written to unwritten, otherwise convert from unwritten to written.
*/
#define XFS_BMAPI_CONVERT 0x040
+#define XFS_BMAPI_STACK_SWITCH 0x080
#define XFS_BMAPI_FLAGS \
{ XFS_BMAPI_ENTIRE, "ENTIRE" }, \
@@ -85,7 +86,8 @@
{ XFS_BMAPI_PREALLOC, "PREALLOC" }, \
{ XFS_BMAPI_IGSTATE, "IGSTATE" }, \
{ XFS_BMAPI_CONTIG, "CONTIG" }, \
- { XFS_BMAPI_CONVERT, "CONVERT" }
+ { XFS_BMAPI_CONVERT, "CONVERT" }, \
+ { XFS_BMAPI_STACK_SWITCH, "STACK_SWITCH" }
static inline int xfs_bmapi_aflag(int w)
@@ -133,6 +135,11 @@
char userdata;/* set if is user data */
char aeof; /* allocated space at eof */
char conv; /* overwriting unwritten extents */
+ char stack_switch;
+ int flags;
+ struct completion *done;
+ struct work_struct work;
+ int result;
} xfs_bmalloca_t;
/*
diff --git a/fs/xfs/xfs_buf.c b/fs/xfs/xfs_buf.c
index 933b793..4b0b8dd 100644
--- a/fs/xfs/xfs_buf.c
+++ b/fs/xfs/xfs_buf.c
@@ -1197,9 +1197,14 @@
{
xfs_buf_t *bp = (xfs_buf_t *)bio->bi_private;
- xfs_buf_ioerror(bp, -error);
+ /*
+ * don't overwrite existing errors - otherwise we can lose errors on
+ * buffers that require multiple bios to complete.
+ */
+ if (!bp->b_error)
+ xfs_buf_ioerror(bp, -error);
- if (!error && xfs_buf_is_vmapped(bp) && (bp->b_flags & XBF_READ))
+ if (!bp->b_error && xfs_buf_is_vmapped(bp) && (bp->b_flags & XBF_READ))
invalidate_kernel_vmap_range(bp->b_addr, xfs_buf_vmap_len(bp));
_xfs_buf_ioend(bp, 1);
@@ -1279,6 +1284,11 @@
if (size)
goto next_chunk;
} else {
+ /*
+ * This is guaranteed not to be the last io reference count
+ * because the caller (xfs_buf_iorequest) holds a count itself.
+ */
+ atomic_dec(&bp->b_io_remaining);
xfs_buf_ioerror(bp, EIO);
bio_put(bio);
}
diff --git a/fs/xfs/xfs_buf_item.c b/fs/xfs/xfs_buf_item.c
index a8d0ed9..becf4a9 100644
--- a/fs/xfs/xfs_buf_item.c
+++ b/fs/xfs/xfs_buf_item.c
@@ -526,7 +526,25 @@
}
xfs_buf_relse(bp);
} else if (freed && remove) {
+ /*
+ * There are currently two references to the buffer - the active
+ * LRU reference and the buf log item. What we are about to do
+ * here - simulate a failed IO completion - requires 3
+ * references.
+ *
+ * The LRU reference is removed by the xfs_buf_stale() call. The
+ * buf item reference is removed by the xfs_buf_iodone()
+ * callback that is run by xfs_buf_do_callbacks() during ioend
+ * processing (via the bp->b_iodone callback), and then finally
+ * the ioend processing will drop the IO reference if the buffer
+ * is marked XBF_ASYNC.
+ *
+ * Hence we need to take an additional reference here so that IO
+ * completion processing doesn't free the buffer prematurely.
+ */
xfs_buf_lock(bp);
+ xfs_buf_hold(bp);
+ bp->b_flags |= XBF_ASYNC;
xfs_buf_ioerror(bp, EIO);
XFS_BUF_UNDONE(bp);
xfs_buf_stale(bp);
diff --git a/fs/xfs/xfs_fsops.c b/fs/xfs/xfs_fsops.c
index c25b094..4beaede 100644
--- a/fs/xfs/xfs_fsops.c
+++ b/fs/xfs/xfs_fsops.c
@@ -399,9 +399,26 @@
/* update secondary superblocks. */
for (agno = 1; agno < nagcount; agno++) {
- error = xfs_trans_read_buf(mp, NULL, mp->m_ddev_targp,
+ error = 0;
+ /*
+ * new secondary superblocks need to be zeroed, not read from
+ * disk as the contents of the new area we are growing into is
+ * completely unknown.
+ */
+ if (agno < oagcount) {
+ error = xfs_trans_read_buf(mp, NULL, mp->m_ddev_targp,
XFS_AGB_TO_DADDR(mp, agno, XFS_SB_BLOCK(mp)),
XFS_FSS_TO_BB(mp, 1), 0, &bp);
+ } else {
+ bp = xfs_trans_get_buf(NULL, mp->m_ddev_targp,
+ XFS_AGB_TO_DADDR(mp, agno, XFS_SB_BLOCK(mp)),
+ XFS_FSS_TO_BB(mp, 1), 0);
+ if (bp)
+ xfs_buf_zero(bp, 0, BBTOB(bp->b_length));
+ else
+ error = ENOMEM;
+ }
+
if (error) {
xfs_warn(mp,
"error %d reading secondary superblock for ag %d",
@@ -423,7 +440,7 @@
break; /* no point in continuing */
}
}
- return 0;
+ return error;
error0:
xfs_trans_cancel(tp, XFS_TRANS_ABORT);
diff --git a/fs/xfs/xfs_ialloc.c b/fs/xfs/xfs_ialloc.c
index 445bf1a..c5c4ef4 100644
--- a/fs/xfs/xfs_ialloc.c
+++ b/fs/xfs/xfs_ialloc.c
@@ -250,6 +250,7 @@
/* boundary */
struct xfs_perag *pag;
+ memset(&args, 0, sizeof(args));
args.tp = tp;
args.mp = tp->t_mountp;
diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c
index 2778258..1938b41 100644
--- a/fs/xfs/xfs_inode.c
+++ b/fs/xfs/xfs_inode.c
@@ -1509,7 +1509,8 @@
* to mark all the active inodes on the buffer stale.
*/
bp = xfs_trans_get_buf(tp, mp->m_ddev_targp, blkno,
- mp->m_bsize * blks_per_cluster, 0);
+ mp->m_bsize * blks_per_cluster,
+ XBF_UNMAPPED);
if (!bp)
return ENOMEM;
diff --git a/fs/xfs/xfs_ioctl.c b/fs/xfs/xfs_ioctl.c
index 8305f2a..c1df3c6 100644
--- a/fs/xfs/xfs_ioctl.c
+++ b/fs/xfs/xfs_ioctl.c
@@ -70,7 +70,7 @@
int hsize;
xfs_handle_t handle;
struct inode *inode;
- struct fd f;
+ struct fd f = {0};
struct path path;
int error;
struct xfs_inode *ip;
diff --git a/fs/xfs/xfs_iomap.c b/fs/xfs/xfs_iomap.c
index 973dff6..7f53766 100644
--- a/fs/xfs/xfs_iomap.c
+++ b/fs/xfs/xfs_iomap.c
@@ -584,7 +584,9 @@
* pointer that the caller gave to us.
*/
error = xfs_bmapi_write(tp, ip, map_start_fsb,
- count_fsb, 0, &first_block, 1,
+ count_fsb,
+ XFS_BMAPI_STACK_SWITCH,
+ &first_block, 1,
imap, &nimaps, &free_list);
if (error)
goto trans_cancel;
diff --git a/fs/xfs/xfs_log.c b/fs/xfs/xfs_log.c
index 7f4f937..4dad756 100644
--- a/fs/xfs/xfs_log.c
+++ b/fs/xfs/xfs_log.c
@@ -2387,14 +2387,27 @@
/*
- * update the last_sync_lsn before we drop the
+ * Completion of a iclog IO does not imply that
+ * a transaction has completed, as transactions
+ * can be large enough to span many iclogs. We
+ * cannot change the tail of the log half way
+ * through a transaction as this may be the only
+ * transaction in the log and moving th etail to
+ * point to the middle of it will prevent
+ * recovery from finding the start of the
+ * transaction. Hence we should only update the
+ * last_sync_lsn if this iclog contains
+ * transaction completion callbacks on it.
+ *
+ * We have to do this before we drop the
* icloglock to ensure we are the only one that
* can update it.
*/
ASSERT(XFS_LSN_CMP(atomic64_read(&log->l_last_sync_lsn),
be64_to_cpu(iclog->ic_header.h_lsn)) <= 0);
- atomic64_set(&log->l_last_sync_lsn,
- be64_to_cpu(iclog->ic_header.h_lsn));
+ if (iclog->ic_callback)
+ atomic64_set(&log->l_last_sync_lsn,
+ be64_to_cpu(iclog->ic_header.h_lsn));
} else
ioerrors++;
diff --git a/fs/xfs/xfs_log_recover.c b/fs/xfs/xfs_log_recover.c
index 5da3ace..d308749 100644
--- a/fs/xfs/xfs_log_recover.c
+++ b/fs/xfs/xfs_log_recover.c
@@ -3541,7 +3541,7 @@
* - order is important.
*/
error = xlog_bread_offset(log, 0,
- bblks - split_bblks, hbp,
+ bblks - split_bblks, dbp,
offset + BBTOB(split_bblks));
if (error)
goto bread_err2;
diff --git a/include/drm/drm_pciids.h b/include/drm/drm_pciids.h
index c78bb99..c5c35e6 100644
--- a/include/drm/drm_pciids.h
+++ b/include/drm/drm_pciids.h
@@ -205,9 +205,12 @@
{0x1002, 0x6788, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \
{0x1002, 0x678A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6790, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x6791, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x6792, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6798, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6799, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \
{0x1002, 0x679A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x679B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \
{0x1002, 0x679E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \
{0x1002, 0x679F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6800, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PITCAIRN|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
@@ -217,6 +220,7 @@
{0x1002, 0x6808, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PITCAIRN|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6809, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PITCAIRN|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6810, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PITCAIRN|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x6811, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PITCAIRN|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6816, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PITCAIRN|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6817, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PITCAIRN|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6818, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PITCAIRN|RADEON_NEW_MEMMAP}, \
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index c127315..f9f5e9e 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -335,8 +335,8 @@
struct clk_hw *__clk_get_hw(struct clk *clk);
u8 __clk_get_num_parents(struct clk *clk);
struct clk *__clk_get_parent(struct clk *clk);
-inline int __clk_get_enable_count(struct clk *clk);
-inline int __clk_get_prepare_count(struct clk *clk);
+int __clk_get_enable_count(struct clk *clk);
+int __clk_get_prepare_count(struct clk *clk);
unsigned long __clk_get_rate(struct clk *clk);
unsigned long __clk_get_flags(struct clk *clk);
int __clk_is_enabled(struct clk *clk);
diff --git a/include/linux/devpts_fs.h b/include/linux/devpts_fs.h
index 5ce0e5f..251a209 100644
--- a/include/linux/devpts_fs.h
+++ b/include/linux/devpts_fs.h
@@ -20,28 +20,28 @@
int devpts_new_index(struct inode *ptmx_inode);
void devpts_kill_index(struct inode *ptmx_inode, int idx);
/* mknod in devpts */
-int devpts_pty_new(struct inode *ptmx_inode, struct tty_struct *tty);
-/* get tty structure */
-struct tty_struct *devpts_get_tty(struct inode *pts_inode, int number);
+struct inode *devpts_pty_new(struct inode *ptmx_inode, dev_t device, int index,
+ void *priv);
+/* get private structure */
+void *devpts_get_priv(struct inode *pts_inode);
/* unlink */
-void devpts_pty_kill(struct tty_struct *tty);
+void devpts_pty_kill(struct inode *inode);
#else
/* Dummy stubs in the no-pty case */
static inline int devpts_new_index(struct inode *ptmx_inode) { return -EINVAL; }
static inline void devpts_kill_index(struct inode *ptmx_inode, int idx) { }
-static inline int devpts_pty_new(struct inode *ptmx_inode,
- struct tty_struct *tty)
+static inline struct inode *devpts_pty_new(struct inode *ptmx_inode,
+ dev_t device, int index, void *priv)
{
- return -EINVAL;
+ return ERR_PTR(-EINVAL);
}
-static inline struct tty_struct *devpts_get_tty(struct inode *pts_inode,
- int number)
+static inline void *devpts_get_priv(struct inode *pts_inode)
{
return NULL;
}
-static inline void devpts_pty_kill(struct tty_struct *tty) { }
+static inline void devpts_pty_kill(struct inode *inode) { }
#endif
diff --git a/arch/arm/plat-mxc/include/mach/ipu.h b/include/linux/dma/ipu-dma.h
similarity index 96%
rename from arch/arm/plat-mxc/include/mach/ipu.h
rename to include/linux/dma/ipu-dma.h
index 539e559..1803111 100644
--- a/arch/arm/plat-mxc/include/mach/ipu.h
+++ b/include/linux/dma/ipu-dma.h
@@ -9,8 +9,8 @@
* published by the Free Software Foundation.
*/
-#ifndef _IPU_H_
-#define _IPU_H_
+#ifndef __LINUX_DMA_IPU_DMA_H
+#define __LINUX_DMA_IPU_DMA_H
#include <linux/types.h>
#include <linux/dmaengine.h>
@@ -174,4 +174,4 @@
#define to_tx_desc(tx) container_of(tx, struct idmac_tx_desc, txd)
#define to_idmac_chan(c) container_of(c, struct idmac_channel, dma_chan)
-#endif
+#endif /* __LINUX_DMA_IPU_DMA_H */
diff --git a/include/linux/dynamic_debug.h b/include/linux/dynamic_debug.h
index c18257b..6dd4787 100644
--- a/include/linux/dynamic_debug.h
+++ b/include/linux/dynamic_debug.h
@@ -61,7 +61,7 @@
const char *fmt, ...);
#define DEFINE_DYNAMIC_DEBUG_METADATA(name, fmt) \
- static struct _ddebug __used __aligned(8) \
+ static struct _ddebug __aligned(8) \
__attribute__((section("__verbose"))) name = { \
.modname = KBUILD_MODNAME, \
.function = __func__, \
diff --git a/include/linux/extcon.h b/include/linux/extcon.h
index 7443a56..2c26c14 100644
--- a/include/linux/extcon.h
+++ b/include/linux/extcon.h
@@ -68,7 +68,7 @@
EXTCON_VIDEO_OUT,
EXTCON_MECHANICAL,
};
-extern const char *extcon_cable_name[];
+extern const char extcon_cable_name[][CABLE_NAME_MAX + 1];
struct extcon_cable;
diff --git a/include/linux/hashtable.h b/include/linux/hashtable.h
new file mode 100644
index 0000000..227c624
--- /dev/null
+++ b/include/linux/hashtable.h
@@ -0,0 +1,192 @@
+/*
+ * Statically sized hash table implementation
+ * (C) 2012 Sasha Levin <levinsasha928@gmail.com>
+ */
+
+#ifndef _LINUX_HASHTABLE_H
+#define _LINUX_HASHTABLE_H
+
+#include <linux/list.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/hash.h>
+#include <linux/rculist.h>
+
+#define DEFINE_HASHTABLE(name, bits) \
+ struct hlist_head name[1 << (bits)] = \
+ { [0 ... ((1 << (bits)) - 1)] = HLIST_HEAD_INIT }
+
+#define DECLARE_HASHTABLE(name, bits) \
+ struct hlist_head name[1 << (bits)]
+
+#define HASH_SIZE(name) (ARRAY_SIZE(name))
+#define HASH_BITS(name) ilog2(HASH_SIZE(name))
+
+/* Use hash_32 when possible to allow for fast 32bit hashing in 64bit kernels. */
+#define hash_min(val, bits) \
+ (sizeof(val) <= 4 ? hash_32(val, bits) : hash_long(val, bits))
+
+static inline void __hash_init(struct hlist_head *ht, unsigned int sz)
+{
+ unsigned int i;
+
+ for (i = 0; i < sz; i++)
+ INIT_HLIST_HEAD(&ht[i]);
+}
+
+/**
+ * hash_init - initialize a hash table
+ * @hashtable: hashtable to be initialized
+ *
+ * Calculates the size of the hashtable from the given parameter, otherwise
+ * same as hash_init_size.
+ *
+ * This has to be a macro since HASH_BITS() will not work on pointers since
+ * it calculates the size during preprocessing.
+ */
+#define hash_init(hashtable) __hash_init(hashtable, HASH_SIZE(hashtable))
+
+/**
+ * hash_add - add an object to a hashtable
+ * @hashtable: hashtable to add to
+ * @node: the &struct hlist_node of the object to be added
+ * @key: the key of the object to be added
+ */
+#define hash_add(hashtable, node, key) \
+ hlist_add_head(node, &hashtable[hash_min(key, HASH_BITS(hashtable))])
+
+/**
+ * hash_add_rcu - add an object to a rcu enabled hashtable
+ * @hashtable: hashtable to add to
+ * @node: the &struct hlist_node of the object to be added
+ * @key: the key of the object to be added
+ */
+#define hash_add_rcu(hashtable, node, key) \
+ hlist_add_head_rcu(node, &hashtable[hash_min(key, HASH_BITS(hashtable))])
+
+/**
+ * hash_hashed - check whether an object is in any hashtable
+ * @node: the &struct hlist_node of the object to be checked
+ */
+static inline bool hash_hashed(struct hlist_node *node)
+{
+ return !hlist_unhashed(node);
+}
+
+static inline bool __hash_empty(struct hlist_head *ht, unsigned int sz)
+{
+ unsigned int i;
+
+ for (i = 0; i < sz; i++)
+ if (!hlist_empty(&ht[i]))
+ return false;
+
+ return true;
+}
+
+/**
+ * hash_empty - check whether a hashtable is empty
+ * @hashtable: hashtable to check
+ *
+ * This has to be a macro since HASH_BITS() will not work on pointers since
+ * it calculates the size during preprocessing.
+ */
+#define hash_empty(hashtable) __hash_empty(hashtable, HASH_SIZE(hashtable))
+
+/**
+ * hash_del - remove an object from a hashtable
+ * @node: &struct hlist_node of the object to remove
+ */
+static inline void hash_del(struct hlist_node *node)
+{
+ hlist_del_init(node);
+}
+
+/**
+ * hash_del_rcu - remove an object from a rcu enabled hashtable
+ * @node: &struct hlist_node of the object to remove
+ */
+static inline void hash_del_rcu(struct hlist_node *node)
+{
+ hlist_del_init_rcu(node);
+}
+
+/**
+ * hash_for_each - iterate over a hashtable
+ * @name: hashtable to iterate
+ * @bkt: integer to use as bucket loop cursor
+ * @node: the &struct list_head to use as a loop cursor for each entry
+ * @obj: the type * to use as a loop cursor for each entry
+ * @member: the name of the hlist_node within the struct
+ */
+#define hash_for_each(name, bkt, node, obj, member) \
+ for ((bkt) = 0, node = NULL; node == NULL && (bkt) < HASH_SIZE(name); (bkt)++)\
+ hlist_for_each_entry(obj, node, &name[bkt], member)
+
+/**
+ * hash_for_each_rcu - iterate over a rcu enabled hashtable
+ * @name: hashtable to iterate
+ * @bkt: integer to use as bucket loop cursor
+ * @node: the &struct list_head to use as a loop cursor for each entry
+ * @obj: the type * to use as a loop cursor for each entry
+ * @member: the name of the hlist_node within the struct
+ */
+#define hash_for_each_rcu(name, bkt, node, obj, member) \
+ for ((bkt) = 0, node = NULL; node == NULL && (bkt) < HASH_SIZE(name); (bkt)++)\
+ hlist_for_each_entry_rcu(obj, node, &name[bkt], member)
+
+/**
+ * hash_for_each_safe - iterate over a hashtable safe against removal of
+ * hash entry
+ * @name: hashtable to iterate
+ * @bkt: integer to use as bucket loop cursor
+ * @node: the &struct list_head to use as a loop cursor for each entry
+ * @tmp: a &struct used for temporary storage
+ * @obj: the type * to use as a loop cursor for each entry
+ * @member: the name of the hlist_node within the struct
+ */
+#define hash_for_each_safe(name, bkt, node, tmp, obj, member) \
+ for ((bkt) = 0, node = NULL; node == NULL && (bkt) < HASH_SIZE(name); (bkt)++)\
+ hlist_for_each_entry_safe(obj, node, tmp, &name[bkt], member)
+
+/**
+ * hash_for_each_possible - iterate over all possible objects hashing to the
+ * same bucket
+ * @name: hashtable to iterate
+ * @obj: the type * to use as a loop cursor for each entry
+ * @node: the &struct list_head to use as a loop cursor for each entry
+ * @member: the name of the hlist_node within the struct
+ * @key: the key of the objects to iterate over
+ */
+#define hash_for_each_possible(name, obj, node, member, key) \
+ hlist_for_each_entry(obj, node, &name[hash_min(key, HASH_BITS(name))], member)
+
+/**
+ * hash_for_each_possible_rcu - iterate over all possible objects hashing to the
+ * same bucket in an rcu enabled hashtable
+ * in a rcu enabled hashtable
+ * @name: hashtable to iterate
+ * @obj: the type * to use as a loop cursor for each entry
+ * @node: the &struct list_head to use as a loop cursor for each entry
+ * @member: the name of the hlist_node within the struct
+ * @key: the key of the objects to iterate over
+ */
+#define hash_for_each_possible_rcu(name, obj, node, member, key) \
+ hlist_for_each_entry_rcu(obj, node, &name[hash_min(key, HASH_BITS(name))], member)
+
+/**
+ * hash_for_each_possible_safe - iterate over all possible objects hashing to the
+ * same bucket safe against removals
+ * @name: hashtable to iterate
+ * @obj: the type * to use as a loop cursor for each entry
+ * @node: the &struct list_head to use as a loop cursor for each entry
+ * @tmp: a &struct used for temporary storage
+ * @member: the name of the hlist_node within the struct
+ * @key: the key of the objects to iterate over
+ */
+#define hash_for_each_possible_safe(name, obj, node, tmp, member, key) \
+ hlist_for_each_entry_safe(obj, node, tmp, \
+ &name[hash_min(key, HASH_BITS(name))], member)
+
+
+#endif
diff --git a/include/linux/i2c-omap.h b/include/linux/i2c-omap.h
index df804ba..92a0dc7 100644
--- a/include/linux/i2c-omap.h
+++ b/include/linux/i2c-omap.h
@@ -34,6 +34,7 @@
u32 clkrate;
u32 rev;
u32 flags;
+ void (*set_mpu_wkup_lat)(struct device *dev, long set);
};
#endif
diff --git a/include/linux/iio/iio.h b/include/linux/iio/iio.h
index c0ae76a..7806c24 100644
--- a/include/linux/iio/iio.h
+++ b/include/linux/iio/iio.h
@@ -618,4 +618,20 @@
};
#endif
+/**
+ * IIO_DEGREE_TO_RAD() - Convert degree to rad
+ * @deg: A value in degree
+ *
+ * Returns the given value converted from degree to rad
+ */
+#define IIO_DEGREE_TO_RAD(deg) (((deg) * 314159ULL + 9000000ULL) / 18000000ULL)
+
+/**
+ * IIO_G_TO_M_S_2() - Convert g to meter / second**2
+ * @g: A value in g
+ *
+ * Returns the given value converted from g to meter / second**2
+ */
+#define IIO_G_TO_M_S_2(g) ((g) * 980665ULL / 100000ULL)
+
#endif /* _INDUSTRIAL_IO_H_ */
diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h
index 93bfc9f..ecc5543 100644
--- a/include/linux/kvm_host.h
+++ b/include/linux/kvm_host.h
@@ -42,19 +42,8 @@
*/
#define KVM_MEMSLOT_INVALID (1UL << 16)
-/*
- * If we support unaligned MMIO, at most one fragment will be split into two:
- */
-#ifdef KVM_UNALIGNED_MMIO
-# define KVM_EXTRA_MMIO_FRAGMENTS 1
-#else
-# define KVM_EXTRA_MMIO_FRAGMENTS 0
-#endif
-
-#define KVM_USER_MMIO_SIZE 8
-
-#define KVM_MAX_MMIO_FRAGMENTS \
- (KVM_MMIO_SIZE / KVM_USER_MMIO_SIZE + KVM_EXTRA_MMIO_FRAGMENTS)
+/* Two fragments for cross MMIO pages. */
+#define KVM_MAX_MMIO_FRAGMENTS 2
/*
* For the normal pfn, the highest 12 bits should be zero,
diff --git a/include/linux/memblock.h b/include/linux/memblock.h
index 569d67d..d452ee1 100644
--- a/include/linux/memblock.h
+++ b/include/linux/memblock.h
@@ -57,6 +57,7 @@
int memblock_remove(phys_addr_t base, phys_addr_t size);
int memblock_free(phys_addr_t base, phys_addr_t size);
int memblock_reserve(phys_addr_t base, phys_addr_t size);
+void memblock_trim_memory(phys_addr_t align);
#ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP
void __next_mem_pfn_range(int *idx, int nid, unsigned long *out_start_pfn,
diff --git a/include/linux/mfd/max77693.h b/include/linux/mfd/max77693.h
index 1d28ae9..fe03b2d 100644
--- a/include/linux/mfd/max77693.h
+++ b/include/linux/mfd/max77693.h
@@ -30,7 +30,20 @@
#ifndef __LINUX_MFD_MAX77693_H
#define __LINUX_MFD_MAX77693_H
+struct max77693_reg_data {
+ u8 addr;
+ u8 data;
+};
+
+struct max77693_muic_platform_data {
+ struct max77693_reg_data *init_data;
+ int num_init_data;
+};
+
struct max77693_platform_data {
int wakeup;
+
+ /* muic data */
+ struct max77693_muic_platform_data *muic_data;
};
#endif /* __LINUX_MFD_MAX77693_H */
diff --git a/arch/arm/plat-omap/include/plat/menelaus.h b/include/linux/mfd/menelaus.h
similarity index 96%
rename from arch/arm/plat-omap/include/plat/menelaus.h
rename to include/linux/mfd/menelaus.h
index 4a970ec..f097e89 100644
--- a/arch/arm/plat-omap/include/plat/menelaus.h
+++ b/include/linux/mfd/menelaus.h
@@ -1,6 +1,4 @@
/*
- * arch/arm/plat-omap/include/mach/menelaus.h
- *
* Functions to access Menelaus power management chip
*/
diff --git a/include/linux/mm.h b/include/linux/mm.h
index fa06804..bcaab4e 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -1684,9 +1684,5 @@
static inline bool page_is_guard(struct page *page) { return false; }
#endif /* CONFIG_DEBUG_PAGEALLOC */
-extern void reset_zone_present_pages(void);
-extern void fixup_zone_present_pages(int nid, unsigned long start_pfn,
- unsigned long end_pfn);
-
#endif /* __KERNEL__ */
#endif /* _LINUX_MM_H */
diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h
index 7c6a113..9653166 100644
--- a/include/linux/mmc/dw_mmc.h
+++ b/include/linux/mmc/dw_mmc.h
@@ -137,7 +137,7 @@
dma_addr_t sg_dma;
void *sg_cpu;
- struct dw_mci_dma_ops *dma_ops;
+ const struct dw_mci_dma_ops *dma_ops;
#ifdef CONFIG_MMC_DW_IDMAC
unsigned int ring_size;
#else
@@ -162,7 +162,7 @@
u16 data_offset;
struct device *dev;
struct dw_mci_board *pdata;
- struct dw_mci_drv_data *drv_data;
+ const struct dw_mci_drv_data *drv_data;
void *priv;
struct clk *biu_clk;
struct clk *ciu_clk;
@@ -186,7 +186,7 @@
struct regulator *vmmc; /* Power regulator */
unsigned long irq_flags; /* IRQ flags */
- unsigned int irq;
+ int irq;
};
/* DMA ops for Internal/External DMAC interface */
diff --git a/include/linux/mmc/sdhci.h b/include/linux/mmc/sdhci.h
index fa8529a..1edcb4d 100644
--- a/include/linux/mmc/sdhci.h
+++ b/include/linux/mmc/sdhci.h
@@ -91,6 +91,7 @@
unsigned int quirks2; /* More deviations from spec. */
#define SDHCI_QUIRK2_HOST_OFF_CARD_ON (1<<0)
+#define SDHCI_QUIRK2_HOST_NO_CMD23 (1<<1)
int irq; /* Device IRQ */
void __iomem *ioaddr; /* Mapped address */
diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h
index 50aaca8..a23923b 100644
--- a/include/linux/mmzone.h
+++ b/include/linux/mmzone.h
@@ -752,7 +752,7 @@
unsigned long size,
enum memmap_context context);
-extern void lruvec_init(struct lruvec *lruvec, struct zone *zone);
+extern void lruvec_init(struct lruvec *lruvec);
static inline struct zone *lruvec_zone(struct lruvec *lruvec)
{
diff --git a/include/linux/of_address.h b/include/linux/of_address.h
index a1984dd..0506eb5 100644
--- a/include/linux/of_address.h
+++ b/include/linux/of_address.h
@@ -28,11 +28,13 @@
#endif
#else /* CONFIG_OF_ADDRESS */
+#ifndef of_address_to_resource
static inline int of_address_to_resource(struct device_node *dev, int index,
struct resource *r)
{
return -EINVAL;
}
+#endif
static inline struct device_node *of_find_matching_node_by_address(
struct device_node *from,
const struct of_device_id *matches,
@@ -40,10 +42,12 @@
{
return NULL;
}
+#ifndef of_iomap
static inline void __iomem *of_iomap(struct device_node *device, int index)
{
return NULL;
}
+#endif
static inline const __be32 *of_get_address(struct device_node *dev, int index,
u64 *size, unsigned int *flags)
{
diff --git a/include/linux/percpu-rwsem.h b/include/linux/percpu-rwsem.h
index cf80f7e..250a4ac 100644
--- a/include/linux/percpu-rwsem.h
+++ b/include/linux/percpu-rwsem.h
@@ -12,34 +12,27 @@
struct mutex mtx;
};
+#define light_mb() barrier()
+#define heavy_mb() synchronize_sched()
+
static inline void percpu_down_read(struct percpu_rw_semaphore *p)
{
- rcu_read_lock();
+ rcu_read_lock_sched();
if (unlikely(p->locked)) {
- rcu_read_unlock();
+ rcu_read_unlock_sched();
mutex_lock(&p->mtx);
this_cpu_inc(*p->counters);
mutex_unlock(&p->mtx);
return;
}
this_cpu_inc(*p->counters);
- rcu_read_unlock();
+ rcu_read_unlock_sched();
+ light_mb(); /* A, between read of p->locked and read of data, paired with D */
}
static inline void percpu_up_read(struct percpu_rw_semaphore *p)
{
- /*
- * On X86, write operation in this_cpu_dec serves as a memory unlock
- * barrier (i.e. memory accesses may be moved before the write, but
- * no memory accesses are moved past the write).
- * On other architectures this may not be the case, so we need smp_mb()
- * there.
- */
-#if defined(CONFIG_X86) && (!defined(CONFIG_X86_PPRO_FENCE) && !defined(CONFIG_X86_OOSTORE))
- barrier();
-#else
- smp_mb();
-#endif
+ light_mb(); /* B, between read of the data and write to p->counter, paired with C */
this_cpu_dec(*p->counters);
}
@@ -58,14 +51,15 @@
{
mutex_lock(&p->mtx);
p->locked = true;
- synchronize_rcu();
+ synchronize_sched(); /* make sure that all readers exit the rcu_read_lock_sched region */
while (__percpu_count(p->counters))
msleep(1);
- smp_rmb(); /* paired with smp_mb() in percpu_sem_up_read() */
+ heavy_mb(); /* C, between read of p->counter and write to data, paired with B */
}
static inline void percpu_up_write(struct percpu_rw_semaphore *p)
{
+ heavy_mb(); /* D, between write to data and write to p->locked, paired with A */
p->locked = false;
mutex_unlock(&p->mtx);
}
diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h
index 2e90235..6bfb2faa 100644
--- a/include/linux/perf_event.h
+++ b/include/linux/perf_event.h
@@ -803,12 +803,16 @@
do { \
static struct notifier_block fn##_nb __cpuinitdata = \
{ .notifier_call = fn, .priority = CPU_PRI_PERF }; \
+ unsigned long cpu = smp_processor_id(); \
+ unsigned long flags; \
fn(&fn##_nb, (unsigned long)CPU_UP_PREPARE, \
- (void *)(unsigned long)smp_processor_id()); \
+ (void *)(unsigned long)cpu); \
+ local_irq_save(flags); \
fn(&fn##_nb, (unsigned long)CPU_STARTING, \
- (void *)(unsigned long)smp_processor_id()); \
+ (void *)(unsigned long)cpu); \
+ local_irq_restore(flags); \
fn(&fn##_nb, (unsigned long)CPU_ONLINE, \
- (void *)(unsigned long)smp_processor_id()); \
+ (void *)(unsigned long)cpu); \
register_cpu_notifier(&fn##_nb); \
} while (0)
diff --git a/include/linux/platform_data/asoc-imx-ssi.h b/include/linux/platform_data/asoc-imx-ssi.h
index 63f3c28..92c7fd72 100644
--- a/include/linux/platform_data/asoc-imx-ssi.h
+++ b/include/linux/platform_data/asoc-imx-ssi.h
@@ -17,5 +17,7 @@
void (*ac97_warm_reset)(struct snd_ac97 *ac97);
};
+extern int mxc_set_irq_fiq(unsigned int irq, unsigned int type);
+
#endif /* __MACH_SSI_H */
diff --git a/include/linux/platform_data/dma-imx.h b/include/linux/platform_data/dma-imx.h
index 1b90803..f6d30cc 100644
--- a/include/linux/platform_data/dma-imx.h
+++ b/include/linux/platform_data/dma-imx.h
@@ -61,7 +61,9 @@
static inline int imx_dma_is_general_purpose(struct dma_chan *chan)
{
return strstr(dev_name(chan->device->dev), "sdma") ||
- !strcmp(dev_name(chan->device->dev), "imx-dma");
+ !strcmp(dev_name(chan->device->dev), "imx1-dma") ||
+ !strcmp(dev_name(chan->device->dev), "imx21-dma") ||
+ !strcmp(dev_name(chan->device->dev), "imx27-dma");
}
#endif
diff --git a/include/linux/platform_data/gpio-omap.h b/include/linux/platform_data/gpio-omap.h
index e8741c2..5d50b25 100644
--- a/include/linux/platform_data/gpio-omap.h
+++ b/include/linux/platform_data/gpio-omap.h
@@ -26,7 +26,6 @@
#include <linux/io.h>
#include <linux/platform_device.h>
-#include <mach/irqs.h>
#define OMAP1_MPUIO_BASE 0xfffb5000
diff --git a/arch/arm/plat-omap/include/plat/led.h b/include/linux/platform_data/leds-omap.h
similarity index 90%
rename from arch/arm/plat-omap/include/plat/led.h
rename to include/linux/platform_data/leds-omap.h
index 25e451e..56c9b2a 100644
--- a/arch/arm/plat-omap/include/plat/led.h
+++ b/include/linux/platform_data/leds-omap.h
@@ -1,6 +1,4 @@
/*
- * arch/arm/plat-omap/include/mach/led.h
- *
* Copyright (C) 2006 Samsung Electronics
* Kyungmin Park <kyungmin.park@samsung.com>
*
diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/include/linux/platform_data/mmc-omap.h
similarity index 79%
rename from arch/arm/plat-omap/include/plat/mmc.h
rename to include/linux/platform_data/mmc-omap.h
index 8b4e4f2..2bf6ea8 100644
--- a/arch/arm/plat-omap/include/plat/mmc.h
+++ b/include/linux/platform_data/mmc-omap.h
@@ -8,27 +8,6 @@
* published by the Free Software Foundation.
*/
-#ifndef __OMAP2_MMC_H
-#define __OMAP2_MMC_H
-
-#include <linux/types.h>
-#include <linux/device.h>
-#include <linux/mmc/host.h>
-
-#include <plat/omap_hwmod.h>
-
-#define OMAP15XX_NR_MMC 1
-#define OMAP16XX_NR_MMC 2
-#define OMAP1_MMC_SIZE 0x080
-#define OMAP1_MMC1_BASE 0xfffb7800
-#define OMAP1_MMC2_BASE 0xfffb7c00 /* omap16xx only */
-
-#define OMAP24XX_NR_MMC 2
-#define OMAP2420_MMC_SIZE OMAP1_MMC_SIZE
-#define OMAP2_MMC1_BASE 0x4809c000
-
-#define OMAP4_MMC_REG_OFFSET 0x100
-
#define OMAP_MMC_MAX_SLOTS 2
/*
@@ -50,6 +29,8 @@
#define OMAP_HSMMC_SUPPORTS_DUAL_VOLT BIT(0)
#define OMAP_HSMMC_BROKEN_MULTIBLOCK_READ BIT(1)
+struct mmc_card;
+
struct omap_mmc_dev_attr {
u8 flags;
};
@@ -126,6 +107,9 @@
/* we can put the features above into this variable */
#define HSMMC_HAS_PBIAS (1 << 0)
#define HSMMC_HAS_UPDATED_RESET (1 << 1)
+#define MMC_OMAP7XX (1 << 2)
+#define MMC_OMAP15XX (1 << 3)
+#define MMC_OMAP16XX (1 << 4)
unsigned features;
int switch_pin; /* gpio (card detect) */
@@ -164,25 +148,3 @@
} slots[OMAP_MMC_MAX_SLOTS];
};
-
-/* called from board-specific card detection service routine */
-extern void omap_mmc_notify_cover_event(struct device *dev, int slot,
- int is_closed);
-
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
-void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
- int nr_controllers);
-void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data);
-#else
-static inline void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
- int nr_controllers)
-{
-}
-static inline void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data)
-{
-}
-#endif
-
-extern int omap_msdi_reset(struct omap_hwmod *oh);
-
-#endif
diff --git a/include/linux/platform_data/mtd-nand-omap2.h b/include/linux/platform_data/mtd-nand-omap2.h
index 1a68c1e..24d32ca 100644
--- a/include/linux/platform_data/mtd-nand-omap2.h
+++ b/include/linux/platform_data/mtd-nand-omap2.h
@@ -8,9 +8,13 @@
* published by the Free Software Foundation.
*/
-#include <plat/gpmc.h>
+#ifndef _MTD_NAND_OMAP2_H
+#define _MTD_NAND_OMAP2_H
+
#include <linux/mtd/partitions.h>
+#define GPMC_BCH_NUM_REMAINDER 8
+
enum nand_io {
NAND_OMAP_PREFETCH_POLLED = 0, /* prefetch polled mode, default */
NAND_OMAP_POLLED, /* polled mode, without prefetch */
@@ -18,10 +22,38 @@
NAND_OMAP_PREFETCH_IRQ /* prefetch enabled irq mode */
};
+enum omap_ecc {
+ /* 1-bit ecc: stored at end of spare area */
+ OMAP_ECC_HAMMING_CODE_DEFAULT = 0, /* Default, s/w method */
+ OMAP_ECC_HAMMING_CODE_HW, /* gpmc to detect the error */
+ /* 1-bit ecc: stored at beginning of spare area as romcode */
+ OMAP_ECC_HAMMING_CODE_HW_ROMCODE, /* gpmc method & romcode layout */
+ OMAP_ECC_BCH4_CODE_HW, /* 4-bit BCH ecc code */
+ OMAP_ECC_BCH8_CODE_HW, /* 8-bit BCH ecc code */
+};
+
+struct gpmc_nand_regs {
+ void __iomem *gpmc_status;
+ void __iomem *gpmc_nand_command;
+ void __iomem *gpmc_nand_address;
+ void __iomem *gpmc_nand_data;
+ void __iomem *gpmc_prefetch_config1;
+ void __iomem *gpmc_prefetch_config2;
+ void __iomem *gpmc_prefetch_control;
+ void __iomem *gpmc_prefetch_status;
+ void __iomem *gpmc_ecc_config;
+ void __iomem *gpmc_ecc_control;
+ void __iomem *gpmc_ecc_size_config;
+ void __iomem *gpmc_ecc1_result;
+ void __iomem *gpmc_bch_result0[GPMC_BCH_NUM_REMAINDER];
+ void __iomem *gpmc_bch_result1[GPMC_BCH_NUM_REMAINDER];
+ void __iomem *gpmc_bch_result2[GPMC_BCH_NUM_REMAINDER];
+ void __iomem *gpmc_bch_result3[GPMC_BCH_NUM_REMAINDER];
+};
+
struct omap_nand_platform_data {
int cs;
struct mtd_partition *parts;
- struct gpmc_timings *gpmc_t;
int nr_parts;
bool dev_ready;
enum nand_io xfer_type;
@@ -30,14 +62,4 @@
struct gpmc_nand_regs reg;
};
-/* minimum size for IO mapping */
-#define NAND_IO_SIZE 4
-
-#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE)
-extern int gpmc_nand_init(struct omap_nand_platform_data *d);
-#else
-static inline int gpmc_nand_init(struct omap_nand_platform_data *d)
-{
- return 0;
-}
#endif
diff --git a/include/linux/platform_data/mtd-onenand-omap2.h b/include/linux/platform_data/mtd-onenand-omap2.h
index 2858667..685af7e 100644
--- a/include/linux/platform_data/mtd-onenand-omap2.h
+++ b/include/linux/platform_data/mtd-onenand-omap2.h
@@ -9,17 +9,15 @@
* published by the Free Software Foundation.
*/
+#ifndef __MTD_ONENAND_OMAP2_H
+#define __MTD_ONENAND_OMAP2_H
+
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#define ONENAND_SYNC_READ (1 << 0)
#define ONENAND_SYNC_READWRITE (1 << 1)
-
-struct onenand_freq_info {
- u16 maf_id;
- u16 dev_id;
- u16 ver_id;
-};
+#define ONENAND_IN_OMAP34XX (1 << 2)
struct omap_onenand_platform_data {
int cs;
@@ -27,27 +25,9 @@
struct mtd_partition *parts;
int nr_parts;
int (*onenand_setup)(void __iomem *, int *freq_ptr);
- int (*get_freq)(const struct onenand_freq_info *freq_info,
- bool *clk_dep);
int dma_channel;
u8 flags;
u8 regulator_can_sleep;
u8 skip_initial_unlocking;
};
-
-#define ONENAND_MAX_PARTITIONS 8
-
-#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
- defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
-
-extern void gpmc_onenand_init(struct omap_onenand_platform_data *d);
-
-#else
-
-#define board_onenand_data NULL
-
-static inline void gpmc_onenand_init(struct omap_onenand_platform_data *d)
-{
-}
-
#endif
diff --git a/include/linux/platform_data/omap-wd-timer.h b/include/linux/platform_data/omap-wd-timer.h
new file mode 100644
index 0000000..d75f5f8
--- /dev/null
+++ b/include/linux/platform_data/omap-wd-timer.h
@@ -0,0 +1,38 @@
+/*
+ * OMAP2+ WDTIMER-specific function prototypes
+ *
+ * Copyright (C) 2012 Texas Instruments, Inc.
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __LINUX_PLATFORM_DATA_OMAP_WD_TIMER_H
+#define __LINUX_PLATFORM_DATA_OMAP_WD_TIMER_H
+
+#include <linux/types.h>
+
+/*
+ * Standardized OMAP reset source bits
+ *
+ * This is a subset of the ones listed in arch/arm/mach-omap2/prm.h
+ * and are the only ones needed in the watchdog driver.
+ */
+#define OMAP_MPU_WD_RST_SRC_ID_SHIFT 3
+
+/**
+ * struct omap_wd_timer_platform_data - WDTIMER integration to the host SoC
+ * @read_reset_sources - fn ptr for the SoC to indicate the last reset cause
+ *
+ * The function pointed to by @read_reset_sources must return its data
+ * in a standard format - search for RST_SRC_ID_SHIFT in
+ * arch/arm/mach-omap2
+ */
+struct omap_wd_timer_platform_data {
+ u32 (*read_reset_sources)(void);
+};
+
+#endif
diff --git a/include/linux/platform_data/omap_ocp2scp.h b/include/linux/platform_data/omap_ocp2scp.h
new file mode 100644
index 0000000..5c6c393
--- /dev/null
+++ b/include/linux/platform_data/omap_ocp2scp.h
@@ -0,0 +1,31 @@
+/*
+ * omap_ocp2scp.h -- ocp2scp header file
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Author: Kishon Vijay Abraham I <kishon@ti.com>
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __DRIVERS_OMAP_OCP2SCP_H
+#define __DRIVERS_OMAP_OCP2SCP_H
+
+struct omap_ocp2scp_dev {
+ const char *drv_name;
+ struct resource *res;
+};
+
+struct omap_ocp2scp_platform_data {
+ int dev_cnt;
+ struct omap_ocp2scp_dev **devices;
+};
+#endif /* __DRIVERS_OMAP_OCP2SCP_H */
diff --git a/include/linux/platform_data/usb-omap.h b/include/linux/platform_data/usb-omap.h
new file mode 100644
index 0000000..8570bcf
--- /dev/null
+++ b/include/linux/platform_data/usb-omap.h
@@ -0,0 +1,80 @@
+/*
+ * usb-omap.h - Platform data for the various OMAP USB IPs
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * This software is distributed under the terms of the GNU General Public
+ * License ("GPL") version 2, as published by the Free Software Foundation.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#define OMAP3_HS_USB_PORTS 3
+
+enum usbhs_omap_port_mode {
+ OMAP_USBHS_PORT_MODE_UNUSED,
+ OMAP_EHCI_PORT_MODE_PHY,
+ OMAP_EHCI_PORT_MODE_TLL,
+ OMAP_EHCI_PORT_MODE_HSIC,
+ OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0,
+ OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM,
+ OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0,
+ OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM,
+ OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0,
+ OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM,
+ OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0,
+ OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM,
+ OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0,
+ OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM
+};
+
+struct usbtll_omap_platform_data {
+ enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS];
+};
+
+struct ehci_hcd_omap_platform_data {
+ enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS];
+ int reset_gpio_port[OMAP3_HS_USB_PORTS];
+ struct regulator *regulator[OMAP3_HS_USB_PORTS];
+ unsigned phy_reset:1;
+};
+
+struct ohci_hcd_omap_platform_data {
+ enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS];
+ unsigned es2_compatibility:1;
+};
+
+struct usbhs_omap_platform_data {
+ enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS];
+
+ struct ehci_hcd_omap_platform_data *ehci_data;
+ struct ohci_hcd_omap_platform_data *ohci_data;
+};
+
+/*-------------------------------------------------------------------------*/
+
+struct omap_musb_board_data {
+ u8 interface_type;
+ u8 mode;
+ u16 power;
+ unsigned extvbus:1;
+ void (*set_phy_power)(u8 on);
+ void (*clear_irq)(void);
+ void (*set_mode)(u8 mode);
+ void (*reset)(void);
+};
+
+enum musb_interface {
+ MUSB_INTERFACE_ULPI,
+ MUSB_INTERFACE_UTMI
+};
diff --git a/include/linux/ptp_clock_kernel.h b/include/linux/ptp_clock_kernel.h
index f2dc6d8..38a9935 100644
--- a/include/linux/ptp_clock_kernel.h
+++ b/include/linux/ptp_clock_kernel.h
@@ -54,7 +54,8 @@
* clock operations
*
* @adjfreq: Adjusts the frequency of the hardware clock.
- * parameter delta: Desired period change in parts per billion.
+ * parameter delta: Desired frequency offset from nominal frequency
+ * in parts per billion
*
* @adjtime: Shifts the time of the hardware clock.
* parameter delta: Desired change in nanoseconds.
diff --git a/include/linux/raid/Kbuild b/include/linux/raid/Kbuild
index 2415a64..e69de29 100644
--- a/include/linux/raid/Kbuild
+++ b/include/linux/raid/Kbuild
@@ -1,2 +0,0 @@
-header-y += md_p.h
-header-y += md_u.h
diff --git a/include/linux/raid/md_u.h b/include/linux/raid/md_u.h
index fb1abb3..358c04b 100644
--- a/include/linux/raid/md_u.h
+++ b/include/linux/raid/md_u.h
@@ -11,149 +11,10 @@
(for example /usr/src/linux/COPYING); if not, write to the Free
Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-
#ifndef _MD_U_H
#define _MD_U_H
-/*
- * Different major versions are not compatible.
- * Different minor versions are only downward compatible.
- * Different patchlevel versions are downward and upward compatible.
- */
-#define MD_MAJOR_VERSION 0
-#define MD_MINOR_VERSION 90
-/*
- * MD_PATCHLEVEL_VERSION indicates kernel functionality.
- * >=1 means different superblock formats are selectable using SET_ARRAY_INFO
- * and major_version/minor_version accordingly
- * >=2 means that Internal bitmaps are supported by setting MD_SB_BITMAP_PRESENT
- * in the super status byte
- * >=3 means that bitmap superblock version 4 is supported, which uses
- * little-ending representation rather than host-endian
- */
-#define MD_PATCHLEVEL_VERSION 3
+#include <uapi/linux/raid/md_u.h>
-/* ioctls */
-
-/* status */
-#define RAID_VERSION _IOR (MD_MAJOR, 0x10, mdu_version_t)
-#define GET_ARRAY_INFO _IOR (MD_MAJOR, 0x11, mdu_array_info_t)
-#define GET_DISK_INFO _IOR (MD_MAJOR, 0x12, mdu_disk_info_t)
-#define PRINT_RAID_DEBUG _IO (MD_MAJOR, 0x13)
-#define RAID_AUTORUN _IO (MD_MAJOR, 0x14)
-#define GET_BITMAP_FILE _IOR (MD_MAJOR, 0x15, mdu_bitmap_file_t)
-
-/* configuration */
-#define CLEAR_ARRAY _IO (MD_MAJOR, 0x20)
-#define ADD_NEW_DISK _IOW (MD_MAJOR, 0x21, mdu_disk_info_t)
-#define HOT_REMOVE_DISK _IO (MD_MAJOR, 0x22)
-#define SET_ARRAY_INFO _IOW (MD_MAJOR, 0x23, mdu_array_info_t)
-#define SET_DISK_INFO _IO (MD_MAJOR, 0x24)
-#define WRITE_RAID_INFO _IO (MD_MAJOR, 0x25)
-#define UNPROTECT_ARRAY _IO (MD_MAJOR, 0x26)
-#define PROTECT_ARRAY _IO (MD_MAJOR, 0x27)
-#define HOT_ADD_DISK _IO (MD_MAJOR, 0x28)
-#define SET_DISK_FAULTY _IO (MD_MAJOR, 0x29)
-#define HOT_GENERATE_ERROR _IO (MD_MAJOR, 0x2a)
-#define SET_BITMAP_FILE _IOW (MD_MAJOR, 0x2b, int)
-
-/* usage */
-#define RUN_ARRAY _IOW (MD_MAJOR, 0x30, mdu_param_t)
-/* 0x31 was START_ARRAY */
-#define STOP_ARRAY _IO (MD_MAJOR, 0x32)
-#define STOP_ARRAY_RO _IO (MD_MAJOR, 0x33)
-#define RESTART_ARRAY_RW _IO (MD_MAJOR, 0x34)
-
-/* 63 partitions with the alternate major number (mdp) */
-#define MdpMinorShift 6
-#ifdef __KERNEL__
extern int mdp_major;
-#endif
-
-typedef struct mdu_version_s {
- int major;
- int minor;
- int patchlevel;
-} mdu_version_t;
-
-typedef struct mdu_array_info_s {
- /*
- * Generic constant information
- */
- int major_version;
- int minor_version;
- int patch_version;
- int ctime;
- int level;
- int size;
- int nr_disks;
- int raid_disks;
- int md_minor;
- int not_persistent;
-
- /*
- * Generic state information
- */
- int utime; /* 0 Superblock update time */
- int state; /* 1 State bits (clean, ...) */
- int active_disks; /* 2 Number of currently active disks */
- int working_disks; /* 3 Number of working disks */
- int failed_disks; /* 4 Number of failed disks */
- int spare_disks; /* 5 Number of spare disks */
-
- /*
- * Personality information
- */
- int layout; /* 0 the array's physical layout */
- int chunk_size; /* 1 chunk size in bytes */
-
-} mdu_array_info_t;
-
-/* non-obvious values for 'level' */
-#define LEVEL_MULTIPATH (-4)
-#define LEVEL_LINEAR (-1)
-#define LEVEL_FAULTY (-5)
-
-/* we need a value for 'no level specified' and 0
- * means 'raid0', so we need something else. This is
- * for internal use only
- */
-#define LEVEL_NONE (-1000000)
-
-typedef struct mdu_disk_info_s {
- /*
- * configuration/status of one particular disk
- */
- int number;
- int major;
- int minor;
- int raid_disk;
- int state;
-
-} mdu_disk_info_t;
-
-typedef struct mdu_start_info_s {
- /*
- * configuration/status of one particular disk
- */
- int major;
- int minor;
- int raid_disk;
- int state;
-
-} mdu_start_info_t;
-
-typedef struct mdu_bitmap_file_s
-{
- char pathname[4096];
-} mdu_bitmap_file_t;
-
-typedef struct mdu_param_s
-{
- int personality; /* 1,2,3,4 */
- int chunk_size; /* in bytes */
- int max_fault; /* unused for now */
-} mdu_param_t;
-
#endif
-
diff --git a/include/linux/rbtree_augmented.h b/include/linux/rbtree_augmented.h
index 214caa3..2ac60c9 100644
--- a/include/linux/rbtree_augmented.h
+++ b/include/linux/rbtree_augmented.h
@@ -24,6 +24,7 @@
#ifndef _LINUX_RBTREE_AUGMENTED_H
#define _LINUX_RBTREE_AUGMENTED_H
+#include <linux/compiler.h>
#include <linux/rbtree.h>
/*
diff --git a/include/linux/rio.h b/include/linux/rio.h
index 4187da5..a3e7842 100644
--- a/include/linux/rio.h
+++ b/include/linux/rio.h
@@ -275,9 +275,11 @@
* struct rio_net - RIO network info
* @node: Node in global list of RIO networks
* @devices: List of devices in this network
+ * @switches: List of switches in this netowrk
* @mports: List of master ports accessing this network
* @hport: Default port for accessing this network
* @id: RIO network ID
+ * @destid_table: destID allocation table
*/
struct rio_net {
struct list_head node; /* node in list of networks */
diff --git a/include/linux/spi/ads7846.h b/include/linux/spi/ads7846.h
index c64de9d..2f694f3 100644
--- a/include/linux/spi/ads7846.h
+++ b/include/linux/spi/ads7846.h
@@ -46,8 +46,9 @@
u16 debounce_rep; /* additional consecutive good readings
* required after the first two */
int gpio_pendown; /* the GPIO used to decide the pendown
- * state if get_pendown_state == NULL
- */
+ * state if get_pendown_state == NULL */
+ int gpio_pendown_debounce; /* platform specific debounce time for
+ * the gpio_pendown */
int (*get_pendown_state)(void);
int (*filter_init) (const struct ads7846_platform_data *pdata,
void **filter_data);
diff --git a/include/linux/spi/tsc2005.h b/include/linux/spi/tsc2005.h
index d9b0c84..8f721e4 100644
--- a/include/linux/spi/tsc2005.h
+++ b/include/linux/spi/tsc2005.h
@@ -3,8 +3,6 @@
*
* Copyright (C) 2009-2010 Nokia Corporation
*
- * Contact: Aaro Koskinen <aaro.koskinen@nokia.com>
- *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
diff --git a/include/linux/tcp.h b/include/linux/tcp.h
index 8a7fc4b..60b7aac 100644
--- a/include/linux/tcp.h
+++ b/include/linux/tcp.h
@@ -191,7 +191,8 @@
u8 do_early_retrans:1,/* Enable RFC5827 early-retransmit */
early_retrans_delayed:1, /* Delayed ER timer installed */
syn_data:1, /* SYN includes data */
- syn_fastopen:1; /* SYN includes Fast Open option */
+ syn_fastopen:1, /* SYN includes Fast Open option */
+ syn_data_acked:1;/* data in SYN is acked by SYN-ACK */
/* RTT measurement */
u32 srtt; /* smoothed round trip time << 3 */
diff --git a/arch/arm/mach-tegra/include/mach/tegra-ahb.h b/include/linux/tegra-ahb.h
similarity index 86%
rename from arch/arm/mach-tegra/include/mach/tegra-ahb.h
rename to include/linux/tegra-ahb.h
index e0f8c84..f1cd075 100644
--- a/arch/arm/mach-tegra/include/mach/tegra-ahb.h
+++ b/include/linux/tegra-ahb.h
@@ -11,9 +11,9 @@
* more details.
*/
-#ifndef __MACH_TEGRA_AHB_H__
-#define __MACH_TEGRA_AHB_H__
+#ifndef __LINUX_AHB_H__
+#define __LINUX_AHB_H__
extern int tegra_ahb_enable_smmu(struct device_node *ahb);
-#endif /* __MACH_TEGRA_AHB_H__ */
+#endif /* __LINUX_AHB_H__ */
diff --git a/include/linux/tty.h b/include/linux/tty.h
index f0b4eb47..d7ff88f 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -188,7 +188,9 @@
};
struct tty_port {
+ struct tty_bufhead buf; /* Locked internally */
struct tty_struct *tty; /* Back pointer */
+ struct tty_struct *itty; /* internal back ptr */
const struct tty_port_operations *ops; /* Port operations */
spinlock_t lock; /* Lock protecting tty field */
int blocked_open; /* Waiting to open */
@@ -197,6 +199,9 @@
wait_queue_head_t close_wait; /* Close waiters */
wait_queue_head_t delta_msr_wait; /* Modem status change */
unsigned long flags; /* TTY flags ASY_*/
+ unsigned long iflags; /* TTYP_ internal flags */
+#define TTYP_FLUSHING 1 /* Flushing to ldisc in progress */
+#define TTYP_FLUSHPENDING 2 /* Queued buffer flush pending */
unsigned char console:1; /* port is a console */
struct mutex mutex; /* Locking */
struct mutex buf_mutex; /* Buffer alloc lock */
@@ -235,6 +240,7 @@
struct mutex ldisc_mutex;
struct tty_ldisc *ldisc;
+ struct mutex atomic_write_lock;
struct mutex legacy_mutex;
struct mutex termios_mutex;
spinlock_t ctrl_lock;
@@ -254,7 +260,6 @@
struct tty_struct *link;
struct fasync_struct *fasync;
- struct tty_bufhead buf; /* Locked internally */
int alt_speed; /* For magic substitution of 38400 bps */
wait_queue_head_t write_wait;
wait_queue_head_t read_wait;
@@ -265,37 +270,10 @@
#define N_TTY_BUF_SIZE 4096
- /*
- * The following is data for the N_TTY line discipline. For
- * historical reasons, this is included in the tty structure.
- * Mostly locked by the BKL.
- */
- unsigned int column;
- unsigned char lnext:1, erasing:1, raw:1, real_raw:1, icanon:1;
unsigned char closing:1;
- unsigned char echo_overrun:1;
unsigned short minimum_to_wake;
- unsigned long overrun_time;
- int num_overrun;
- unsigned long process_char_map[256/(8*sizeof(unsigned long))];
- char *read_buf;
- int read_head;
- int read_tail;
- int read_cnt;
- unsigned long read_flags[N_TTY_BUF_SIZE/(8*sizeof(unsigned long))];
- unsigned char *echo_buf;
- unsigned int echo_pos;
- unsigned int echo_cnt;
- int canon_data;
- unsigned long canon_head;
- unsigned int canon_column;
- struct mutex atomic_read_lock;
- struct mutex atomic_write_lock;
- struct mutex output_lock;
- struct mutex echo_lock;
unsigned char *write_buf;
int write_cnt;
- spinlock_t read_lock;
/* If the tty has a pending do_SAK, queue it here - akpm */
struct work_struct SAK_work;
struct tty_port *port;
@@ -335,8 +313,6 @@
#define TTY_PTY_LOCK 16 /* pty private */
#define TTY_NO_WRITE_SPLIT 17 /* Preserve write boundaries to driver */
#define TTY_HUPPED 18 /* Post driver->hangup() */
-#define TTY_FLUSHING 19 /* Flushing to ldisc in progress */
-#define TTY_FLUSHPENDING 20 /* Queued buffer flush pending */
#define TTY_HUPPING 21 /* ->hangup() in progress */
#define TTY_WRITE_FLUSH(tty) tty_write_flush((tty))
@@ -412,9 +388,9 @@
extern void no_tty(void);
extern void tty_flip_buffer_push(struct tty_struct *tty);
extern void tty_flush_to_ldisc(struct tty_struct *tty);
-extern void tty_buffer_free_all(struct tty_struct *tty);
+extern void tty_buffer_free_all(struct tty_port *port);
extern void tty_buffer_flush(struct tty_struct *tty);
-extern void tty_buffer_init(struct tty_struct *tty);
+extern void tty_buffer_init(struct tty_port *port);
extern speed_t tty_get_baud_rate(struct tty_struct *tty);
extern speed_t tty_termios_baud_rate(struct ktermios *termios);
extern speed_t tty_termios_input_baud_rate(struct ktermios *termios);
@@ -535,7 +511,7 @@
/* tty_audit.c */
#ifdef CONFIG_AUDIT
extern void tty_audit_add_data(struct tty_struct *tty, unsigned char *data,
- size_t size);
+ size_t size, unsigned icanon);
extern void tty_audit_exit(void);
extern void tty_audit_fork(struct signal_struct *sig);
extern void tty_audit_tiocsti(struct tty_struct *tty, char ch);
@@ -544,7 +520,7 @@
kuid_t loginuid, u32 sessionid);
#else
static inline void tty_audit_add_data(struct tty_struct *tty,
- unsigned char *data, size_t size)
+ unsigned char *data, size_t size, unsigned icanon)
{
}
static inline void tty_audit_tiocsti(struct tty_struct *tty, char ch)
diff --git a/include/linux/tty_flip.h b/include/linux/tty_flip.h
index 9239d03..2002344 100644
--- a/include/linux/tty_flip.h
+++ b/include/linux/tty_flip.h
@@ -11,7 +11,7 @@
static inline int tty_insert_flip_char(struct tty_struct *tty,
unsigned char ch, char flag)
{
- struct tty_buffer *tb = tty->buf.tail;
+ struct tty_buffer *tb = tty->port->buf.tail;
if (tb && tb->used < tb->size) {
tb->flag_buf_ptr[tb->used] = flag;
tb->char_buf_ptr[tb->used++] = ch;
diff --git a/include/linux/uprobes.h b/include/linux/uprobes.h
index e6f0331..2459457 100644
--- a/include/linux/uprobes.h
+++ b/include/linux/uprobes.h
@@ -35,16 +35,6 @@
# include <asm/uprobes.h>
#endif
-/* flags that denote/change uprobes behaviour */
-
-/* Have a copy of original instruction */
-#define UPROBE_COPY_INSN 0x1
-
-/* Dont run handlers when first register/ last unregister in progress*/
-#define UPROBE_RUN_HANDLER 0x2
-/* Can skip singlestep */
-#define UPROBE_SKIP_SSTEP 0x4
-
struct uprobe_consumer {
int (*handler)(struct uprobe_consumer *self, struct pt_regs *regs);
/*
@@ -59,7 +49,6 @@
#ifdef CONFIG_UPROBES
enum uprobe_task_state {
UTASK_RUNNING,
- UTASK_BP_HIT,
UTASK_SSTEP,
UTASK_SSTEP_ACK,
UTASK_SSTEP_TRAPPED,
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 1b49890..7d5b600 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -1218,6 +1218,7 @@
const u8 *ie;
size_t ie_len;
u16 reason_code;
+ bool local_state_change;
};
/**
@@ -2651,6 +2652,15 @@
unsigned int __attribute_const__ ieee80211_hdrlen(__le16 fc);
/**
+ * ieee80211_get_mesh_hdrlen - get mesh extension header length
+ * @meshhdr: the mesh extension header, only the flags field
+ * (first byte) will be accessed
+ * Returns the length of the extension header, which is always at
+ * least 6 bytes and at most 18 if address 5 and 6 are present.
+ */
+unsigned int ieee80211_get_mesh_hdrlen(struct ieee80211s_hdr *meshhdr);
+
+/**
* DOC: Data path helpers
*
* In addition to generic utilities, cfg80211 also offers
diff --git a/include/net/xfrm.h b/include/net/xfrm.h
index 6f0ba01..63445ed 100644
--- a/include/net/xfrm.h
+++ b/include/net/xfrm.h
@@ -1351,7 +1351,7 @@
};
extern void xfrm_init(void);
-extern void xfrm4_init(int rt_hash_size);
+extern void xfrm4_init(void);
extern int xfrm_state_init(struct net *net);
extern void xfrm_state_fini(struct net *net);
extern void xfrm4_state_init(void);
diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h
index 88fae8d..55367b0 100644
--- a/include/scsi/scsi_device.h
+++ b/include/scsi/scsi_device.h
@@ -135,6 +135,8 @@
* because we did a bus reset. */
unsigned use_10_for_rw:1; /* first try 10-byte read / write */
unsigned use_10_for_ms:1; /* first try 10-byte mode sense/select */
+ unsigned no_report_opcodes:1; /* no REPORT SUPPORTED OPERATION CODES */
+ unsigned no_write_same:1; /* no WRITE SAME command */
unsigned skip_ms_page_8:1; /* do not use MODE SENSE page 0x08 */
unsigned skip_ms_page_3f:1; /* do not use MODE SENSE page 0x3f */
unsigned skip_vpd_pages:1; /* do not read VPD pages */
@@ -362,6 +364,8 @@
int retries, struct scsi_sense_hdr *sshdr);
extern int scsi_get_vpd_page(struct scsi_device *, u8 page, unsigned char *buf,
int buf_len);
+extern int scsi_report_opcode(struct scsi_device *sdev, unsigned char *buffer,
+ unsigned int len, unsigned char opcode);
extern int scsi_device_set_state(struct scsi_device *sdev,
enum scsi_device_state state);
extern struct scsi_event *sdev_evt_alloc(enum scsi_device_event evt_type,
diff --git a/include/sound/core.h b/include/sound/core.h
index bc05668..93896ad 100644
--- a/include/sound/core.h
+++ b/include/sound/core.h
@@ -132,6 +132,7 @@
int shutdown; /* this card is going down */
int free_on_last_close; /* free in context of file_release */
wait_queue_head_t shutdown_sleep;
+ atomic_t refcount; /* refcount for disconnection */
struct device *dev; /* device assigned to this card */
struct device *card_dev; /* cardX object for sysfs */
@@ -189,6 +190,7 @@
const struct file_operations *f_ops; /* file operations */
void *private_data; /* private data for f_ops->open */
struct device *dev; /* device for sysfs */
+ struct snd_card *card_ptr; /* assigned card instance */
};
/* return a device pointer linked to each sound device as a parent */
@@ -295,6 +297,7 @@
int snd_component_add(struct snd_card *card, const char *component);
int snd_card_file_add(struct snd_card *card, struct file *file);
int snd_card_file_remove(struct snd_card *card, struct file *file);
+void snd_card_unref(struct snd_card *card);
#define snd_card_set_dev(card, devptr) ((card)->dev = (devptr))
diff --git a/include/trace/events/xen.h b/include/trace/events/xen.h
index 15ba03b..d06b6da 100644
--- a/include/trace/events/xen.h
+++ b/include/trace/events/xen.h
@@ -377,6 +377,14 @@
DEFINE_XEN_MMU_PGD_EVENT(xen_mmu_pgd_pin);
DEFINE_XEN_MMU_PGD_EVENT(xen_mmu_pgd_unpin);
+TRACE_EVENT(xen_mmu_flush_tlb_all,
+ TP_PROTO(int x),
+ TP_ARGS(x),
+ TP_STRUCT__entry(__array(char, x, 0)),
+ TP_fast_assign((void)x),
+ TP_printk("%s", "")
+ );
+
TRACE_EVENT(xen_mmu_flush_tlb,
TP_PROTO(int x),
TP_ARGS(x),
diff --git a/include/uapi/linux/eventpoll.h b/include/uapi/linux/eventpoll.h
index 8c99ce7..2c267bc 100644
--- a/include/uapi/linux/eventpoll.h
+++ b/include/uapi/linux/eventpoll.h
@@ -25,7 +25,6 @@
#define EPOLL_CTL_ADD 1
#define EPOLL_CTL_DEL 2
#define EPOLL_CTL_MOD 3
-#define EPOLL_CTL_DISABLE 4
/*
* Request the handling of system wakeup events so as to prevent system suspends
diff --git a/include/uapi/linux/oom.h b/include/uapi/linux/oom.h
index a49c4af..b29272d 100644
--- a/include/uapi/linux/oom.h
+++ b/include/uapi/linux/oom.h
@@ -8,4 +8,13 @@
#define OOM_SCORE_ADJ_MIN (-1000)
#define OOM_SCORE_ADJ_MAX 1000
+/*
+ * /proc/<pid>/oom_adj set to -17 protects from the oom killer for legacy
+ * purposes.
+ */
+#define OOM_DISABLE (-17)
+/* inclusive */
+#define OOM_ADJUST_MIN (-16)
+#define OOM_ADJUST_MAX 15
+
#endif /* _UAPI__INCLUDE_LINUX_OOM_H */
diff --git a/include/uapi/linux/raid/Kbuild b/include/uapi/linux/raid/Kbuild
index aafaa5a..e2c3d25 100644
--- a/include/uapi/linux/raid/Kbuild
+++ b/include/uapi/linux/raid/Kbuild
@@ -1 +1,3 @@
# UAPI Header export list
+header-y += md_p.h
+header-y += md_u.h
diff --git a/include/linux/raid/md_p.h b/include/uapi/linux/raid/md_p.h
similarity index 100%
rename from include/linux/raid/md_p.h
rename to include/uapi/linux/raid/md_p.h
diff --git a/include/uapi/linux/raid/md_u.h b/include/uapi/linux/raid/md_u.h
new file mode 100644
index 0000000..4133e74
--- /dev/null
+++ b/include/uapi/linux/raid/md_u.h
@@ -0,0 +1,155 @@
+/*
+ md_u.h : user <=> kernel API between Linux raidtools and RAID drivers
+ Copyright (C) 1998 Ingo Molnar
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ You should have received a copy of the GNU General Public License
+ (for example /usr/src/linux/COPYING); if not, write to the Free
+ Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef _UAPI_MD_U_H
+#define _UAPI_MD_U_H
+
+/*
+ * Different major versions are not compatible.
+ * Different minor versions are only downward compatible.
+ * Different patchlevel versions are downward and upward compatible.
+ */
+#define MD_MAJOR_VERSION 0
+#define MD_MINOR_VERSION 90
+/*
+ * MD_PATCHLEVEL_VERSION indicates kernel functionality.
+ * >=1 means different superblock formats are selectable using SET_ARRAY_INFO
+ * and major_version/minor_version accordingly
+ * >=2 means that Internal bitmaps are supported by setting MD_SB_BITMAP_PRESENT
+ * in the super status byte
+ * >=3 means that bitmap superblock version 4 is supported, which uses
+ * little-ending representation rather than host-endian
+ */
+#define MD_PATCHLEVEL_VERSION 3
+
+/* ioctls */
+
+/* status */
+#define RAID_VERSION _IOR (MD_MAJOR, 0x10, mdu_version_t)
+#define GET_ARRAY_INFO _IOR (MD_MAJOR, 0x11, mdu_array_info_t)
+#define GET_DISK_INFO _IOR (MD_MAJOR, 0x12, mdu_disk_info_t)
+#define PRINT_RAID_DEBUG _IO (MD_MAJOR, 0x13)
+#define RAID_AUTORUN _IO (MD_MAJOR, 0x14)
+#define GET_BITMAP_FILE _IOR (MD_MAJOR, 0x15, mdu_bitmap_file_t)
+
+/* configuration */
+#define CLEAR_ARRAY _IO (MD_MAJOR, 0x20)
+#define ADD_NEW_DISK _IOW (MD_MAJOR, 0x21, mdu_disk_info_t)
+#define HOT_REMOVE_DISK _IO (MD_MAJOR, 0x22)
+#define SET_ARRAY_INFO _IOW (MD_MAJOR, 0x23, mdu_array_info_t)
+#define SET_DISK_INFO _IO (MD_MAJOR, 0x24)
+#define WRITE_RAID_INFO _IO (MD_MAJOR, 0x25)
+#define UNPROTECT_ARRAY _IO (MD_MAJOR, 0x26)
+#define PROTECT_ARRAY _IO (MD_MAJOR, 0x27)
+#define HOT_ADD_DISK _IO (MD_MAJOR, 0x28)
+#define SET_DISK_FAULTY _IO (MD_MAJOR, 0x29)
+#define HOT_GENERATE_ERROR _IO (MD_MAJOR, 0x2a)
+#define SET_BITMAP_FILE _IOW (MD_MAJOR, 0x2b, int)
+
+/* usage */
+#define RUN_ARRAY _IOW (MD_MAJOR, 0x30, mdu_param_t)
+/* 0x31 was START_ARRAY */
+#define STOP_ARRAY _IO (MD_MAJOR, 0x32)
+#define STOP_ARRAY_RO _IO (MD_MAJOR, 0x33)
+#define RESTART_ARRAY_RW _IO (MD_MAJOR, 0x34)
+
+/* 63 partitions with the alternate major number (mdp) */
+#define MdpMinorShift 6
+
+typedef struct mdu_version_s {
+ int major;
+ int minor;
+ int patchlevel;
+} mdu_version_t;
+
+typedef struct mdu_array_info_s {
+ /*
+ * Generic constant information
+ */
+ int major_version;
+ int minor_version;
+ int patch_version;
+ int ctime;
+ int level;
+ int size;
+ int nr_disks;
+ int raid_disks;
+ int md_minor;
+ int not_persistent;
+
+ /*
+ * Generic state information
+ */
+ int utime; /* 0 Superblock update time */
+ int state; /* 1 State bits (clean, ...) */
+ int active_disks; /* 2 Number of currently active disks */
+ int working_disks; /* 3 Number of working disks */
+ int failed_disks; /* 4 Number of failed disks */
+ int spare_disks; /* 5 Number of spare disks */
+
+ /*
+ * Personality information
+ */
+ int layout; /* 0 the array's physical layout */
+ int chunk_size; /* 1 chunk size in bytes */
+
+} mdu_array_info_t;
+
+/* non-obvious values for 'level' */
+#define LEVEL_MULTIPATH (-4)
+#define LEVEL_LINEAR (-1)
+#define LEVEL_FAULTY (-5)
+
+/* we need a value for 'no level specified' and 0
+ * means 'raid0', so we need something else. This is
+ * for internal use only
+ */
+#define LEVEL_NONE (-1000000)
+
+typedef struct mdu_disk_info_s {
+ /*
+ * configuration/status of one particular disk
+ */
+ int number;
+ int major;
+ int minor;
+ int raid_disk;
+ int state;
+
+} mdu_disk_info_t;
+
+typedef struct mdu_start_info_s {
+ /*
+ * configuration/status of one particular disk
+ */
+ int major;
+ int minor;
+ int raid_disk;
+ int state;
+
+} mdu_start_info_t;
+
+typedef struct mdu_bitmap_file_s
+{
+ char pathname[4096];
+} mdu_bitmap_file_t;
+
+typedef struct mdu_param_s
+{
+ int personality; /* 1,2,3,4 */
+ int chunk_size; /* in bytes */
+ int max_fault; /* unused for now */
+} mdu_param_t;
+
+#endif /* _UAPI_MD_U_H */
diff --git a/include/uapi/linux/tcp.h b/include/uapi/linux/tcp.h
index c4b89a5..e962faa 100644
--- a/include/uapi/linux/tcp.h
+++ b/include/uapi/linux/tcp.h
@@ -130,6 +130,7 @@
#define TCPI_OPT_WSCALE 4
#define TCPI_OPT_ECN 8 /* ECN was negociated at TCP session init */
#define TCPI_OPT_ECN_SEEN 16 /* we received at least one packet with ECT */
+#define TCPI_OPT_SYN_DATA 32 /* SYN-ACK acked data in SYN sent or rcvd */
enum tcp_ca_state {
TCP_CA_Open = 0,
diff --git a/include/video/omapdss.h b/include/video/omapdss.h
index 3729173..88c8294 100644
--- a/include/video/omapdss.h
+++ b/include/video/omapdss.h
@@ -314,6 +314,19 @@
int dsi_enable_video_output(struct omap_dss_device *dssdev, int channel);
void dsi_disable_video_output(struct omap_dss_device *dssdev, int channel);
+enum omapdss_version {
+ OMAPDSS_VER_UNKNOWN = 0,
+ OMAPDSS_VER_OMAP24xx,
+ OMAPDSS_VER_OMAP34xx_ES1, /* OMAP3430 ES1.0, 2.0 */
+ OMAPDSS_VER_OMAP34xx_ES3, /* OMAP3430 ES3.0+ */
+ OMAPDSS_VER_OMAP3630,
+ OMAPDSS_VER_AM35xx,
+ OMAPDSS_VER_OMAP4430_ES1, /* OMAP4430 ES1.0 */
+ OMAPDSS_VER_OMAP4430_ES2, /* OMAP4430 ES2.0, 2.1, 2.2 */
+ OMAPDSS_VER_OMAP4, /* All other OMAP4s */
+ OMAPDSS_VER_OMAP5,
+};
+
/* Board specific data */
struct omap_dss_board_info {
int (*get_context_loss_count)(struct device *dev);
@@ -323,6 +336,7 @@
int (*dsi_enable_pads)(int dsi_id, unsigned lane_mask);
void (*dsi_disable_pads)(int dsi_id, unsigned lane_mask);
int (*set_min_bus_tput)(struct device *dev, unsigned long r);
+ enum omapdss_version version;
};
/* Init with the board info */
diff --git a/arch/arm/plat-omap/include/plat/vrfb.h b/include/video/omapvrfb.h
similarity index 95%
rename from arch/arm/plat-omap/include/plat/vrfb.h
rename to include/video/omapvrfb.h
index 3792bde..bb0bd89 100644
--- a/arch/arm/plat-omap/include/plat/vrfb.h
+++ b/include/video/omapvrfb.h
@@ -36,6 +36,7 @@
};
#ifdef CONFIG_OMAP2_VRFB
+extern bool omap_vrfb_supported(void);
extern int omap_vrfb_request_ctx(struct vrfb *vrfb);
extern void omap_vrfb_release_ctx(struct vrfb *vrfb);
extern void omap_vrfb_adjust_size(u16 *width, u16 *height,
@@ -49,6 +50,7 @@
extern void omap_vrfb_restore_context(void);
#else
+static inline bool omap_vrfb_supported(void) { return false; }
static inline int omap_vrfb_request_ctx(struct vrfb *vrfb) { return 0; }
static inline void omap_vrfb_release_ctx(struct vrfb *vrfb) {}
static inline void omap_vrfb_adjust_size(u16 *width, u16 *height,
diff --git a/include/xen/grant_table.h b/include/xen/grant_table.h
index aecee9d..694dcaf 100644
--- a/include/xen/grant_table.h
+++ b/include/xen/grant_table.h
@@ -170,7 +170,7 @@
unmap->dev_bus_addr = 0;
}
-int arch_gnttab_map_shared(unsigned long *frames, unsigned long nr_gframes,
+int arch_gnttab_map_shared(xen_pfn_t *frames, unsigned long nr_gframes,
unsigned long max_nr_gframes,
void **__shared);
int arch_gnttab_map_status(uint64_t *frames, unsigned long nr_gframes,
diff --git a/include/xen/hvm.h b/include/xen/hvm.h
index b193fa2..13e43e4 100644
--- a/include/xen/hvm.h
+++ b/include/xen/hvm.h
@@ -5,6 +5,36 @@
#include <xen/interface/hvm/params.h>
#include <asm/xen/hypercall.h>
+static const char *param_name(int op)
+{
+#define PARAM(x) [HVM_PARAM_##x] = #x
+ static const char *const names[] = {
+ PARAM(CALLBACK_IRQ),
+ PARAM(STORE_PFN),
+ PARAM(STORE_EVTCHN),
+ PARAM(PAE_ENABLED),
+ PARAM(IOREQ_PFN),
+ PARAM(BUFIOREQ_PFN),
+ PARAM(TIMER_MODE),
+ PARAM(HPET_ENABLED),
+ PARAM(IDENT_PT),
+ PARAM(DM_DOMAIN),
+ PARAM(ACPI_S_STATE),
+ PARAM(VM86_TSS),
+ PARAM(VPT_ALIGN),
+ PARAM(CONSOLE_PFN),
+ PARAM(CONSOLE_EVTCHN),
+ };
+#undef PARAM
+
+ if (op >= ARRAY_SIZE(names))
+ return "unknown";
+
+ if (!names[op])
+ return "reserved";
+
+ return names[op];
+}
static inline int hvm_get_parameter(int idx, uint64_t *value)
{
struct xen_hvm_param xhv;
@@ -14,8 +44,8 @@
xhv.index = idx;
r = HYPERVISOR_hvm_op(HVMOP_get_param, &xhv);
if (r < 0) {
- printk(KERN_ERR "Cannot get hvm parameter %d: %d!\n",
- idx, r);
+ printk(KERN_ERR "Cannot get hvm parameter %s (%d): %d!\n",
+ param_name(idx), idx, r);
return r;
}
*value = xhv.value;
diff --git a/include/xen/interface/grant_table.h b/include/xen/interface/grant_table.h
index f9f8b97..e40fae9 100644
--- a/include/xen/interface/grant_table.h
+++ b/include/xen/interface/grant_table.h
@@ -310,7 +310,7 @@
uint32_t nr_frames;
/* OUT parameters. */
int16_t status; /* GNTST_* */
- GUEST_HANDLE(ulong) frame_list;
+ GUEST_HANDLE(xen_pfn_t) frame_list;
};
DEFINE_GUEST_HANDLE_STRUCT(gnttab_setup_table);
diff --git a/include/xen/interface/memory.h b/include/xen/interface/memory.h
index b66d04c..90712e2 100644
--- a/include/xen/interface/memory.h
+++ b/include/xen/interface/memory.h
@@ -179,28 +179,8 @@
};
DEFINE_GUEST_HANDLE_STRUCT(xen_add_to_physmap);
-/*
- * Translates a list of domain-specific GPFNs into MFNs. Returns a -ve error
- * code on failure. This call only works for auto-translated guests.
- */
-#define XENMEM_translate_gpfn_list 8
-struct xen_translate_gpfn_list {
- /* Which domain to translate for? */
- domid_t domid;
-
- /* Length of list. */
- xen_ulong_t nr_gpfns;
-
- /* List of GPFNs to translate. */
- GUEST_HANDLE(ulong) gpfn_list;
-
- /*
- * Output list to contain MFN translations. May be the same as the input
- * list (in which case each input GPFN is overwritten with the output MFN).
- */
- GUEST_HANDLE(ulong) mfn_list;
-};
-DEFINE_GUEST_HANDLE_STRUCT(xen_translate_gpfn_list);
+/*** REMOVED ***/
+/*#define XENMEM_translate_gpfn_list 8*/
/*
* Returns the pseudo-physical memory map as it was when the domain
diff --git a/init/main.c b/init/main.c
index 9cf77ab..e33e09d 100644
--- a/init/main.c
+++ b/init/main.c
@@ -442,9 +442,11 @@
{
}
+# if THREAD_SIZE >= PAGE_SIZE
void __init __weak thread_info_cache_init(void)
{
}
+#endif
/*
* Set up kernel memory allocators
diff --git a/kernel/Makefile b/kernel/Makefile
index 0dfeca4..86e3285 100644
--- a/kernel/Makefile
+++ b/kernel/Makefile
@@ -174,10 +174,8 @@
@echo "###"
@echo "### If this takes a long time, you might wish to run rngd in the"
@echo "### background to keep the supply of entropy topped up. It"
- @echo "### needs to be run as root, and should use a hardware random"
- @echo "### number generator if one is available, eg:"
- @echo "###"
- @echo "### rngd -r /dev/hwrandom"
+ @echo "### needs to be run as root, and uses a hardware random"
+ @echo "### number generator if one is available."
@echo "###"
openssl req -new -nodes -utf8 $(sign_key_with_hash) -days 36500 -batch \
-x509 -config x509.genkey \
diff --git a/kernel/cgroup.c b/kernel/cgroup.c
index 13774b3..f24f724 100644
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -1962,9 +1962,8 @@
* trading it for newcg is protected by cgroup_mutex, we're safe to drop
* it here; it will be freed under RCU.
*/
- put_css_set(oldcg);
-
set_bit(CGRP_RELEASABLE, &oldcgrp->flags);
+ put_css_set(oldcg);
}
/**
@@ -4815,31 +4814,20 @@
*
* A pointer to the shared css_set was automatically copied in
* fork.c by dup_task_struct(). However, we ignore that copy, since
- * it was not made under the protection of RCU, cgroup_mutex or
- * threadgroup_change_begin(), so it might no longer be a valid
- * cgroup pointer. cgroup_attach_task() might have already changed
- * current->cgroups, allowing the previously referenced cgroup
- * group to be removed and freed.
- *
- * Outside the pointer validity we also need to process the css_set
- * inheritance between threadgoup_change_begin() and
- * threadgoup_change_end(), this way there is no leak in any process
- * wide migration performed by cgroup_attach_proc() that could otherwise
- * miss a thread because it is too early or too late in the fork stage.
+ * it was not made under the protection of RCU or cgroup_mutex, so
+ * might no longer be a valid cgroup pointer. cgroup_attach_task() might
+ * have already changed current->cgroups, allowing the previously
+ * referenced cgroup group to be removed and freed.
*
* At the point that cgroup_fork() is called, 'current' is the parent
* task, and the passed argument 'child' points to the child task.
*/
void cgroup_fork(struct task_struct *child)
{
- /*
- * We don't need to task_lock() current because current->cgroups
- * can't be changed concurrently here. The parent obviously hasn't
- * exited and called cgroup_exit(), and we are synchronized against
- * cgroup migration through threadgroup_change_begin().
- */
+ task_lock(current);
child->cgroups = current->cgroups;
get_css_set(child->cgroups);
+ task_unlock(current);
INIT_LIST_HEAD(&child->cg_list);
}
@@ -4895,19 +4883,10 @@
*/
if (use_task_css_set_links) {
write_lock(&css_set_lock);
- if (list_empty(&child->cg_list)) {
- /*
- * It's safe to use child->cgroups without task_lock()
- * here because we are protected through
- * threadgroup_change_begin() against concurrent
- * css_set change in cgroup_task_migrate(). Also
- * the task can't exit at that point until
- * wake_up_new_task() is called, so we are protected
- * against cgroup_exit() setting child->cgroup to
- * init_css_set.
- */
+ task_lock(child);
+ if (list_empty(&child->cg_list))
list_add(&child->cg_list, &child->cgroups->tasks);
- }
+ task_unlock(child);
write_unlock(&css_set_lock);
}
}
diff --git a/kernel/events/uprobes.c b/kernel/events/uprobes.c
index 98256bc..5cc4e7e 100644
--- a/kernel/events/uprobes.c
+++ b/kernel/events/uprobes.c
@@ -78,15 +78,23 @@
*/
static atomic_t uprobe_events = ATOMIC_INIT(0);
+/* Have a copy of original instruction */
+#define UPROBE_COPY_INSN 0
+/* Dont run handlers when first register/ last unregister in progress*/
+#define UPROBE_RUN_HANDLER 1
+/* Can skip singlestep */
+#define UPROBE_SKIP_SSTEP 2
+
struct uprobe {
struct rb_node rb_node; /* node in the rb tree */
atomic_t ref;
struct rw_semaphore consumer_rwsem;
+ struct mutex copy_mutex; /* TODO: kill me and UPROBE_COPY_INSN */
struct list_head pending_list;
struct uprobe_consumer *consumers;
struct inode *inode; /* Also hold a ref to inode */
loff_t offset;
- int flags;
+ unsigned long flags;
struct arch_uprobe arch;
};
@@ -100,17 +108,12 @@
*/
static bool valid_vma(struct vm_area_struct *vma, bool is_register)
{
- if (!vma->vm_file)
- return false;
+ vm_flags_t flags = VM_HUGETLB | VM_MAYEXEC | VM_SHARED;
- if (!is_register)
- return true;
+ if (is_register)
+ flags |= VM_WRITE;
- if ((vma->vm_flags & (VM_HUGETLB|VM_READ|VM_WRITE|VM_EXEC|VM_SHARED))
- == (VM_READ|VM_EXEC))
- return true;
-
- return false;
+ return vma->vm_file && (vma->vm_flags & flags) == VM_MAYEXEC;
}
static unsigned long offset_to_vaddr(struct vm_area_struct *vma, loff_t offset)
@@ -193,19 +196,44 @@
return *insn == UPROBE_SWBP_INSN;
}
+static void copy_opcode(struct page *page, unsigned long vaddr, uprobe_opcode_t *opcode)
+{
+ void *kaddr = kmap_atomic(page);
+ memcpy(opcode, kaddr + (vaddr & ~PAGE_MASK), UPROBE_SWBP_INSN_SIZE);
+ kunmap_atomic(kaddr);
+}
+
+static int verify_opcode(struct page *page, unsigned long vaddr, uprobe_opcode_t *new_opcode)
+{
+ uprobe_opcode_t old_opcode;
+ bool is_swbp;
+
+ copy_opcode(page, vaddr, &old_opcode);
+ is_swbp = is_swbp_insn(&old_opcode);
+
+ if (is_swbp_insn(new_opcode)) {
+ if (is_swbp) /* register: already installed? */
+ return 0;
+ } else {
+ if (!is_swbp) /* unregister: was it changed by us? */
+ return 0;
+ }
+
+ return 1;
+}
+
/*
* NOTE:
* Expect the breakpoint instruction to be the smallest size instruction for
* the architecture. If an arch has variable length instruction and the
* breakpoint instruction is not of the smallest length instruction
- * supported by that architecture then we need to modify read_opcode /
+ * supported by that architecture then we need to modify is_swbp_at_addr and
* write_opcode accordingly. This would never be a problem for archs that
* have fixed length instructions.
*/
/*
* write_opcode - write the opcode at a given virtual address.
- * @auprobe: arch breakpointing information.
* @mm: the probed process address space.
* @vaddr: the virtual address to store the opcode.
* @opcode: opcode to be written at @vaddr.
@@ -216,8 +244,8 @@
* For mm @mm, write the opcode at @vaddr.
* Return 0 (success) or a negative errno.
*/
-static int write_opcode(struct arch_uprobe *auprobe, struct mm_struct *mm,
- unsigned long vaddr, uprobe_opcode_t opcode)
+static int write_opcode(struct mm_struct *mm, unsigned long vaddr,
+ uprobe_opcode_t opcode)
{
struct page *old_page, *new_page;
void *vaddr_old, *vaddr_new;
@@ -226,10 +254,14 @@
retry:
/* Read the page with vaddr into memory */
- ret = get_user_pages(NULL, mm, vaddr, 1, 0, 0, &old_page, &vma);
+ ret = get_user_pages(NULL, mm, vaddr, 1, 0, 1, &old_page, &vma);
if (ret <= 0)
return ret;
+ ret = verify_opcode(old_page, vaddr, &opcode);
+ if (ret <= 0)
+ goto put_old;
+
ret = -ENOMEM;
new_page = alloc_page_vma(GFP_HIGHUSER_MOVABLE, vma, vaddr);
if (!new_page)
@@ -264,63 +296,6 @@
}
/**
- * read_opcode - read the opcode at a given virtual address.
- * @mm: the probed process address space.
- * @vaddr: the virtual address to read the opcode.
- * @opcode: location to store the read opcode.
- *
- * Called with mm->mmap_sem held (for read and with a reference to
- * mm.
- *
- * For mm @mm, read the opcode at @vaddr and store it in @opcode.
- * Return 0 (success) or a negative errno.
- */
-static int read_opcode(struct mm_struct *mm, unsigned long vaddr, uprobe_opcode_t *opcode)
-{
- struct page *page;
- void *vaddr_new;
- int ret;
-
- ret = get_user_pages(NULL, mm, vaddr, 1, 0, 1, &page, NULL);
- if (ret <= 0)
- return ret;
-
- vaddr_new = kmap_atomic(page);
- vaddr &= ~PAGE_MASK;
- memcpy(opcode, vaddr_new + vaddr, UPROBE_SWBP_INSN_SIZE);
- kunmap_atomic(vaddr_new);
-
- put_page(page);
-
- return 0;
-}
-
-static int is_swbp_at_addr(struct mm_struct *mm, unsigned long vaddr)
-{
- uprobe_opcode_t opcode;
- int result;
-
- if (current->mm == mm) {
- pagefault_disable();
- result = __copy_from_user_inatomic(&opcode, (void __user*)vaddr,
- sizeof(opcode));
- pagefault_enable();
-
- if (likely(result == 0))
- goto out;
- }
-
- result = read_opcode(mm, vaddr, &opcode);
- if (result)
- return result;
-out:
- if (is_swbp_insn(&opcode))
- return 1;
-
- return 0;
-}
-
-/**
* set_swbp - store breakpoint at a given address.
* @auprobe: arch specific probepoint information.
* @mm: the probed process address space.
@@ -331,18 +306,7 @@
*/
int __weak set_swbp(struct arch_uprobe *auprobe, struct mm_struct *mm, unsigned long vaddr)
{
- int result;
- /*
- * See the comment near uprobes_hash().
- */
- result = is_swbp_at_addr(mm, vaddr);
- if (result == 1)
- return 0;
-
- if (result)
- return result;
-
- return write_opcode(auprobe, mm, vaddr, UPROBE_SWBP_INSN);
+ return write_opcode(mm, vaddr, UPROBE_SWBP_INSN);
}
/**
@@ -357,16 +321,7 @@
int __weak
set_orig_insn(struct arch_uprobe *auprobe, struct mm_struct *mm, unsigned long vaddr)
{
- int result;
-
- result = is_swbp_at_addr(mm, vaddr);
- if (!result)
- return -EINVAL;
-
- if (result != 1)
- return result;
-
- return write_opcode(auprobe, mm, vaddr, *(uprobe_opcode_t *)auprobe->insn);
+ return write_opcode(mm, vaddr, *(uprobe_opcode_t *)auprobe->insn);
}
static int match_uprobe(struct uprobe *l, struct uprobe *r)
@@ -473,7 +428,7 @@
spin_unlock(&uprobes_treelock);
/* For now assume that the instruction need not be single-stepped */
- uprobe->flags |= UPROBE_SKIP_SSTEP;
+ __set_bit(UPROBE_SKIP_SSTEP, &uprobe->flags);
return u;
}
@@ -495,6 +450,7 @@
uprobe->inode = igrab(inode);
uprobe->offset = offset;
init_rwsem(&uprobe->consumer_rwsem);
+ mutex_init(&uprobe->copy_mutex);
/* add to uprobes_tree, sorted on inode:offset */
cur_uprobe = insert_uprobe(uprobe);
@@ -515,7 +471,7 @@
{
struct uprobe_consumer *uc;
- if (!(uprobe->flags & UPROBE_RUN_HANDLER))
+ if (!test_bit(UPROBE_RUN_HANDLER, &uprobe->flags))
return;
down_read(&uprobe->consumer_rwsem);
@@ -621,29 +577,43 @@
return __copy_insn(mapping, filp, uprobe->arch.insn, bytes, uprobe->offset);
}
-/*
- * How mm->uprobes_state.count gets updated
- * uprobe_mmap() increments the count if
- * - it successfully adds a breakpoint.
- * - it cannot add a breakpoint, but sees that there is a underlying
- * breakpoint (via a is_swbp_at_addr()).
- *
- * uprobe_munmap() decrements the count if
- * - it sees a underlying breakpoint, (via is_swbp_at_addr)
- * (Subsequent uprobe_unregister wouldnt find the breakpoint
- * unless a uprobe_mmap kicks in, since the old vma would be
- * dropped just after uprobe_munmap.)
- *
- * uprobe_register increments the count if:
- * - it successfully adds a breakpoint.
- *
- * uprobe_unregister decrements the count if:
- * - it sees a underlying breakpoint and removes successfully.
- * (via is_swbp_at_addr)
- * (Subsequent uprobe_munmap wouldnt find the breakpoint
- * since there is no underlying breakpoint after the
- * breakpoint removal.)
- */
+static int prepare_uprobe(struct uprobe *uprobe, struct file *file,
+ struct mm_struct *mm, unsigned long vaddr)
+{
+ int ret = 0;
+
+ if (test_bit(UPROBE_COPY_INSN, &uprobe->flags))
+ return ret;
+
+ mutex_lock(&uprobe->copy_mutex);
+ if (test_bit(UPROBE_COPY_INSN, &uprobe->flags))
+ goto out;
+
+ ret = copy_insn(uprobe, file);
+ if (ret)
+ goto out;
+
+ ret = -ENOTSUPP;
+ if (is_swbp_insn((uprobe_opcode_t *)uprobe->arch.insn))
+ goto out;
+
+ ret = arch_uprobe_analyze_insn(&uprobe->arch, mm, vaddr);
+ if (ret)
+ goto out;
+
+ /* write_opcode() assumes we don't cross page boundary */
+ BUG_ON((uprobe->offset & ~PAGE_MASK) +
+ UPROBE_SWBP_INSN_SIZE > PAGE_SIZE);
+
+ smp_wmb(); /* pairs with rmb() in find_active_uprobe() */
+ set_bit(UPROBE_COPY_INSN, &uprobe->flags);
+
+ out:
+ mutex_unlock(&uprobe->copy_mutex);
+
+ return ret;
+}
+
static int
install_breakpoint(struct uprobe *uprobe, struct mm_struct *mm,
struct vm_area_struct *vma, unsigned long vaddr)
@@ -661,24 +631,9 @@
if (!uprobe->consumers)
return 0;
- if (!(uprobe->flags & UPROBE_COPY_INSN)) {
- ret = copy_insn(uprobe, vma->vm_file);
- if (ret)
- return ret;
-
- if (is_swbp_insn((uprobe_opcode_t *)uprobe->arch.insn))
- return -ENOTSUPP;
-
- ret = arch_uprobe_analyze_insn(&uprobe->arch, mm, vaddr);
- if (ret)
- return ret;
-
- /* write_opcode() assumes we don't cross page boundary */
- BUG_ON((uprobe->offset & ~PAGE_MASK) +
- UPROBE_SWBP_INSN_SIZE > PAGE_SIZE);
-
- uprobe->flags |= UPROBE_COPY_INSN;
- }
+ ret = prepare_uprobe(uprobe, vma->vm_file, mm, vaddr);
+ if (ret)
+ return ret;
/*
* set MMF_HAS_UPROBES in advance for uprobe_pre_sstep_notifier(),
@@ -697,15 +652,15 @@
return ret;
}
-static void
+static int
remove_breakpoint(struct uprobe *uprobe, struct mm_struct *mm, unsigned long vaddr)
{
/* can happen if uprobe_register() fails */
if (!test_bit(MMF_HAS_UPROBES, &mm->flags))
- return;
+ return 0;
set_bit(MMF_RECALC_UPROBES, &mm->flags);
- set_orig_insn(&uprobe->arch, mm, vaddr);
+ return set_orig_insn(&uprobe->arch, mm, vaddr);
}
/*
@@ -820,7 +775,7 @@
struct mm_struct *mm = info->mm;
struct vm_area_struct *vma;
- if (err)
+ if (err && is_register)
goto free;
down_write(&mm->mmap_sem);
@@ -836,7 +791,7 @@
if (is_register)
err = install_breakpoint(uprobe, mm, vma, info->vaddr);
else
- remove_breakpoint(uprobe, mm, info->vaddr);
+ err |= remove_breakpoint(uprobe, mm, info->vaddr);
unlock:
up_write(&mm->mmap_sem);
@@ -893,13 +848,15 @@
mutex_lock(uprobes_hash(inode));
uprobe = alloc_uprobe(inode, offset);
- if (uprobe && !consumer_add(uprobe, uc)) {
+ if (!uprobe) {
+ ret = -ENOMEM;
+ } else if (!consumer_add(uprobe, uc)) {
ret = __uprobe_register(uprobe);
if (ret) {
uprobe->consumers = NULL;
__uprobe_unregister(uprobe);
} else {
- uprobe->flags |= UPROBE_RUN_HANDLER;
+ set_bit(UPROBE_RUN_HANDLER, &uprobe->flags);
}
}
@@ -932,7 +889,7 @@
if (consumer_del(uprobe, uc)) {
if (!uprobe->consumers) {
__uprobe_unregister(uprobe);
- uprobe->flags &= ~UPROBE_RUN_HANDLER;
+ clear_bit(UPROBE_RUN_HANDLER, &uprobe->flags);
}
}
@@ -1393,10 +1350,11 @@
*/
static bool can_skip_sstep(struct uprobe *uprobe, struct pt_regs *regs)
{
- if (arch_uprobe_skip_sstep(&uprobe->arch, regs))
- return true;
-
- uprobe->flags &= ~UPROBE_SKIP_SSTEP;
+ if (test_bit(UPROBE_SKIP_SSTEP, &uprobe->flags)) {
+ if (arch_uprobe_skip_sstep(&uprobe->arch, regs))
+ return true;
+ clear_bit(UPROBE_SKIP_SSTEP, &uprobe->flags);
+ }
return false;
}
@@ -1419,6 +1377,30 @@
clear_bit(MMF_HAS_UPROBES, &mm->flags);
}
+static int is_swbp_at_addr(struct mm_struct *mm, unsigned long vaddr)
+{
+ struct page *page;
+ uprobe_opcode_t opcode;
+ int result;
+
+ pagefault_disable();
+ result = __copy_from_user_inatomic(&opcode, (void __user*)vaddr,
+ sizeof(opcode));
+ pagefault_enable();
+
+ if (likely(result == 0))
+ goto out;
+
+ result = get_user_pages(NULL, mm, vaddr, 1, 0, 1, &page, NULL);
+ if (result < 0)
+ return result;
+
+ copy_opcode(page, vaddr, &opcode);
+ put_page(page);
+ out:
+ return is_swbp_insn(&opcode);
+}
+
static struct uprobe *find_active_uprobe(unsigned long bp_vaddr, int *is_swbp)
{
struct mm_struct *mm = current->mm;
@@ -1489,38 +1471,41 @@
}
return;
}
+ /*
+ * TODO: move copy_insn/etc into _register and remove this hack.
+ * After we hit the bp, _unregister + _register can install the
+ * new and not-yet-analyzed uprobe at the same address, restart.
+ */
+ smp_rmb(); /* pairs with wmb() in install_breakpoint() */
+ if (unlikely(!test_bit(UPROBE_COPY_INSN, &uprobe->flags)))
+ goto restart;
utask = current->utask;
if (!utask) {
utask = add_utask();
/* Cannot allocate; re-execute the instruction. */
if (!utask)
- goto cleanup_ret;
+ goto restart;
}
- utask->active_uprobe = uprobe;
- handler_chain(uprobe, regs);
- if (uprobe->flags & UPROBE_SKIP_SSTEP && can_skip_sstep(uprobe, regs))
- goto cleanup_ret;
- utask->state = UTASK_SSTEP;
+ handler_chain(uprobe, regs);
+ if (can_skip_sstep(uprobe, regs))
+ goto out;
+
if (!pre_ssout(uprobe, regs, bp_vaddr)) {
arch_uprobe_enable_step(&uprobe->arch);
+ utask->active_uprobe = uprobe;
+ utask->state = UTASK_SSTEP;
return;
}
-cleanup_ret:
- if (utask) {
- utask->active_uprobe = NULL;
- utask->state = UTASK_RUNNING;
- }
- if (!(uprobe->flags & UPROBE_SKIP_SSTEP))
-
- /*
- * cannot singlestep; cannot skip instruction;
- * re-execute the instruction.
- */
- instruction_pointer_set(regs, bp_vaddr);
-
+restart:
+ /*
+ * cannot singlestep; cannot skip instruction;
+ * re-execute the instruction.
+ */
+ instruction_pointer_set(regs, bp_vaddr);
+out:
put_uprobe(uprobe);
}
@@ -1552,13 +1537,12 @@
}
/*
- * On breakpoint hit, breakpoint notifier sets the TIF_UPROBE flag. (and on
- * subsequent probe hits on the thread sets the state to UTASK_BP_HIT) and
- * allows the thread to return from interrupt.
+ * On breakpoint hit, breakpoint notifier sets the TIF_UPROBE flag and
+ * allows the thread to return from interrupt. After that handle_swbp()
+ * sets utask->active_uprobe.
*
- * On singlestep exception, singlestep notifier sets the TIF_UPROBE flag and
- * also sets the state to UTASK_SSTEP_ACK and allows the thread to return from
- * interrupt.
+ * On singlestep exception, singlestep notifier sets the TIF_UPROBE flag
+ * and allows the thread to return from interrupt.
*
* While returning to userspace, thread notices the TIF_UPROBE flag and calls
* uprobe_notify_resume().
@@ -1567,11 +1551,13 @@
{
struct uprobe_task *utask;
+ clear_thread_flag(TIF_UPROBE);
+
utask = current->utask;
- if (!utask || utask->state == UTASK_BP_HIT)
- handle_swbp(regs);
- else
+ if (utask && utask->active_uprobe)
handle_singlestep(utask, regs);
+ else
+ handle_swbp(regs);
}
/*
@@ -1580,17 +1566,10 @@
*/
int uprobe_pre_sstep_notifier(struct pt_regs *regs)
{
- struct uprobe_task *utask;
-
if (!current->mm || !test_bit(MMF_HAS_UPROBES, ¤t->mm->flags))
return 0;
- utask = current->utask;
- if (utask)
- utask->state = UTASK_BP_HIT;
-
set_thread_flag(TIF_UPROBE);
-
return 1;
}
diff --git a/kernel/futex.c b/kernel/futex.c
index 3717e7b..20ef219 100644
--- a/kernel/futex.c
+++ b/kernel/futex.c
@@ -716,7 +716,7 @@
struct futex_pi_state **ps,
struct task_struct *task, int set_waiters)
{
- int lock_taken, ret, ownerdied = 0;
+ int lock_taken, ret, force_take = 0;
u32 uval, newval, curval, vpid = task_pid_vnr(task);
retry:
@@ -755,17 +755,15 @@
newval = curval | FUTEX_WAITERS;
/*
- * There are two cases, where a futex might have no owner (the
- * owner TID is 0): OWNER_DIED. We take over the futex in this
- * case. We also do an unconditional take over, when the owner
- * of the futex died.
- *
- * This is safe as we are protected by the hash bucket lock !
+ * Should we force take the futex? See below.
*/
- if (unlikely(ownerdied || !(curval & FUTEX_TID_MASK))) {
- /* Keep the OWNER_DIED bit */
+ if (unlikely(force_take)) {
+ /*
+ * Keep the OWNER_DIED and the WAITERS bit and set the
+ * new TID value.
+ */
newval = (curval & ~FUTEX_TID_MASK) | vpid;
- ownerdied = 0;
+ force_take = 0;
lock_taken = 1;
}
@@ -775,7 +773,7 @@
goto retry;
/*
- * We took the lock due to owner died take over.
+ * We took the lock due to forced take over.
*/
if (unlikely(lock_taken))
return 1;
@@ -790,20 +788,25 @@
switch (ret) {
case -ESRCH:
/*
- * No owner found for this futex. Check if the
- * OWNER_DIED bit is set to figure out whether
- * this is a robust futex or not.
+ * We failed to find an owner for this
+ * futex. So we have no pi_state to block
+ * on. This can happen in two cases:
+ *
+ * 1) The owner died
+ * 2) A stale FUTEX_WAITERS bit
+ *
+ * Re-read the futex value.
*/
if (get_futex_value_locked(&curval, uaddr))
return -EFAULT;
/*
- * We simply start over in case of a robust
- * futex. The code above will take the futex
- * and return happy.
+ * If the owner died or we have a stale
+ * WAITERS bit the owner TID in the user space
+ * futex is 0.
*/
- if (curval & FUTEX_OWNER_DIED) {
- ownerdied = 1;
+ if (!(curval & FUTEX_TID_MASK)) {
+ force_take = 1;
goto retry;
}
default:
diff --git a/kernel/module.c b/kernel/module.c
index 6085f5e..6e48c3a 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -2293,12 +2293,17 @@
src = (void *)info->hdr + symsect->sh_offset;
nsrc = symsect->sh_size / sizeof(*src);
+ /* strtab always starts with a nul, so offset 0 is the empty string. */
+ strtab_size = 1;
+
/* Compute total space required for the core symbols' strtab. */
- for (ndst = i = strtab_size = 1; i < nsrc; ++i, ++src)
- if (is_core_symbol(src, info->sechdrs, info->hdr->e_shnum)) {
- strtab_size += strlen(&info->strtab[src->st_name]) + 1;
+ for (ndst = i = 0; i < nsrc; i++) {
+ if (i == 0 ||
+ is_core_symbol(src+i, info->sechdrs, info->hdr->e_shnum)) {
+ strtab_size += strlen(&info->strtab[src[i].st_name])+1;
ndst++;
}
+ }
/* Append room for core symbols at end of core part. */
info->symoffs = ALIGN(mod->core_size, symsect->sh_addralign ?: 1);
@@ -2332,15 +2337,15 @@
mod->core_symtab = dst = mod->module_core + info->symoffs;
mod->core_strtab = s = mod->module_core + info->stroffs;
src = mod->symtab;
- *dst = *src;
*s++ = 0;
- for (ndst = i = 1; i < mod->num_symtab; ++i, ++src) {
- if (!is_core_symbol(src, info->sechdrs, info->hdr->e_shnum))
- continue;
-
- dst[ndst] = *src;
- dst[ndst++].st_name = s - mod->core_strtab;
- s += strlcpy(s, &mod->strtab[src->st_name], KSYM_NAME_LEN) + 1;
+ for (ndst = i = 0; i < mod->num_symtab; i++) {
+ if (i == 0 ||
+ is_core_symbol(src+i, info->sechdrs, info->hdr->e_shnum)) {
+ dst[ndst] = src[i];
+ dst[ndst++].st_name = s - mod->core_strtab;
+ s += strlcpy(s, &mod->strtab[src[i].st_name],
+ KSYM_NAME_LEN) + 1;
+ }
}
mod->core_num_syms = ndst;
}
diff --git a/kernel/module_signing.c b/kernel/module_signing.c
index d492a23..ea1b1df 100644
--- a/kernel/module_signing.c
+++ b/kernel/module_signing.c
@@ -192,7 +192,7 @@
size_t modlen = *_modlen, sig_len;
int ret;
- pr_devel("==>%s(,%lu)\n", __func__, modlen);
+ pr_devel("==>%s(,%zu)\n", __func__, modlen);
if (modlen <= sizeof(ms))
return -EBADMSG;
diff --git a/kernel/pid_namespace.c b/kernel/pid_namespace.c
index eb00be2..7b07cc0d 100644
--- a/kernel/pid_namespace.c
+++ b/kernel/pid_namespace.c
@@ -71,12 +71,22 @@
return NULL;
}
+/* MAX_PID_NS_LEVEL is needed for limiting size of 'struct pid' */
+#define MAX_PID_NS_LEVEL 32
+
static struct pid_namespace *create_pid_namespace(struct pid_namespace *parent_pid_ns)
{
struct pid_namespace *ns;
unsigned int level = parent_pid_ns->level + 1;
- int i, err = -ENOMEM;
+ int i;
+ int err;
+ if (level > MAX_PID_NS_LEVEL) {
+ err = -EINVAL;
+ goto out;
+ }
+
+ err = -ENOMEM;
ns = kmem_cache_zalloc(pid_ns_cachep, GFP_KERNEL);
if (ns == NULL)
goto out;
diff --git a/kernel/printk.c b/kernel/printk.c
index 2d607f4..22e070f 100644
--- a/kernel/printk.c
+++ b/kernel/printk.c
@@ -87,6 +87,12 @@
struct console *console_drivers;
EXPORT_SYMBOL_GPL(console_drivers);
+#ifdef CONFIG_LOCKDEP
+static struct lockdep_map console_lock_dep_map = {
+ .name = "console_lock"
+};
+#endif
+
/*
* This is used for debugging the mess that is the VT code by
* keeping track if we have the console semaphore held. It's
@@ -1908,12 +1914,14 @@
*/
void console_lock(void)
{
- BUG_ON(in_interrupt());
+ might_sleep();
+
down(&console_sem);
if (console_suspended)
return;
console_locked = 1;
console_may_schedule = 1;
+ mutex_acquire(&console_lock_dep_map, 0, 0, _RET_IP_);
}
EXPORT_SYMBOL(console_lock);
@@ -1935,6 +1943,7 @@
}
console_locked = 1;
console_may_schedule = 0;
+ mutex_acquire(&console_lock_dep_map, 0, 1, _RET_IP_);
return 1;
}
EXPORT_SYMBOL(console_trylock);
@@ -2095,6 +2104,7 @@
local_irq_restore(flags);
}
console_locked = 0;
+ mutex_release(&console_lock_dep_map, 1, _RET_IP_);
/* Release the exclusive_console once it is used */
if (unlikely(exclusive_console))
diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c
index b32ed0e..b979426 100644
--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -1567,6 +1567,10 @@
put_online_cpus();
} else {
+ /* Make sure this CPU has been intitialized */
+ if (!cpumask_test_cpu(cpu_id, buffer->cpumask))
+ goto out;
+
cpu_buffer = buffer->buffers[cpu_id];
if (nr_pages == cpu_buffer->nr_pages)
diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index d951daa..042d221 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -2982,7 +2982,7 @@
set_work_cpu_and_clear_pending(&dwork->work, work_cpu(&dwork->work));
local_irq_restore(flags);
- return true;
+ return ret;
}
EXPORT_SYMBOL(cancel_delayed_work);
diff --git a/lib/genalloc.c b/lib/genalloc.c
index ca208a9..5492043 100644
--- a/lib/genalloc.c
+++ b/lib/genalloc.c
@@ -178,7 +178,7 @@
struct gen_pool_chunk *chunk;
int nbits = size >> pool->min_alloc_order;
int nbytes = sizeof(struct gen_pool_chunk) +
- (nbits + BITS_PER_BYTE - 1) / BITS_PER_BYTE;
+ BITS_TO_LONGS(nbits) * sizeof(long);
chunk = kmalloc_node(nbytes, GFP_KERNEL | __GFP_ZERO, nid);
if (unlikely(chunk == NULL))
diff --git a/lib/mpi/longlong.h b/lib/mpi/longlong.h
index 678ce4f..095ab15 100644
--- a/lib/mpi/longlong.h
+++ b/lib/mpi/longlong.h
@@ -641,7 +641,14 @@
************** MIPS *****************
***************************************/
#if defined(__mips__) && W_TYPE_SIZE == 32
-#if __GNUC__ > 2 || __GNUC_MINOR__ >= 7
+#if __GNUC__ >= 4 && __GNUC_MINOR__ >= 4
+#define umul_ppmm(w1, w0, u, v) \
+do { \
+ UDItype __ll = (UDItype)(u) * (v); \
+ w1 = __ll >> 32; \
+ w0 = __ll; \
+} while (0)
+#elif __GNUC__ > 2 || __GNUC_MINOR__ >= 7
#define umul_ppmm(w1, w0, u, v) \
__asm__ ("multu %2,%3" \
: "=l" ((USItype)(w0)), \
@@ -666,7 +673,15 @@
************** MIPS/64 **************
***************************************/
#if (defined(__mips) && __mips >= 3) && W_TYPE_SIZE == 64
-#if __GNUC__ > 2 || __GNUC_MINOR__ >= 7
+#if __GNUC__ >= 4 && __GNUC_MINOR__ >= 4
+#define umul_ppmm(w1, w0, u, v) \
+do { \
+ typedef unsigned int __ll_UTItype __attribute__((mode(TI))); \
+ __ll_UTItype __ll = (__ll_UTItype)(u) * (v); \
+ w1 = __ll >> 64; \
+ w0 = __ll; \
+} while (0)
+#elif __GNUC__ > 2 || __GNUC_MINOR__ >= 7
#define umul_ppmm(w1, w0, u, v) \
__asm__ ("dmultu %2,%3" \
: "=l" ((UDItype)(w0)), \
diff --git a/mm/bootmem.c b/mm/bootmem.c
index 434be4a..f468185 100644
--- a/mm/bootmem.c
+++ b/mm/bootmem.c
@@ -198,8 +198,6 @@
int order = ilog2(BITS_PER_LONG);
__free_pages_bootmem(pfn_to_page(start), order);
- fixup_zone_present_pages(page_to_nid(pfn_to_page(start)),
- start, start + BITS_PER_LONG);
count += BITS_PER_LONG;
start += BITS_PER_LONG;
} else {
@@ -210,9 +208,6 @@
if (vec & 1) {
page = pfn_to_page(start + off);
__free_pages_bootmem(page, 0);
- fixup_zone_present_pages(
- page_to_nid(page),
- start + off, start + off + 1);
count++;
}
vec >>= 1;
@@ -226,11 +221,8 @@
pages = bdata->node_low_pfn - bdata->node_min_pfn;
pages = bootmem_bootmap_pages(pages);
count += pages;
- while (pages--) {
- fixup_zone_present_pages(page_to_nid(page),
- page_to_pfn(page), page_to_pfn(page) + 1);
+ while (pages--)
__free_pages_bootmem(page++, 0);
- }
bdebug("nid=%td released=%lx\n", bdata - bootmem_node_data, count);
diff --git a/mm/highmem.c b/mm/highmem.c
index d517cd1..2da13a5 100644
--- a/mm/highmem.c
+++ b/mm/highmem.c
@@ -98,7 +98,7 @@
{
unsigned long addr = (unsigned long)vaddr;
- if (addr >= PKMAP_ADDR(0) && addr <= PKMAP_ADDR(LAST_PKMAP)) {
+ if (addr >= PKMAP_ADDR(0) && addr < PKMAP_ADDR(LAST_PKMAP)) {
int i = (addr - PKMAP_ADDR(0)) >> PAGE_SHIFT;
return pte_page(pkmap_page_table[i]);
}
diff --git a/mm/memblock.c b/mm/memblock.c
index 931eef1..6259055 100644
--- a/mm/memblock.c
+++ b/mm/memblock.c
@@ -930,6 +930,30 @@
return memblock_overlaps_region(&memblock.reserved, base, size) >= 0;
}
+void __init_memblock memblock_trim_memory(phys_addr_t align)
+{
+ int i;
+ phys_addr_t start, end, orig_start, orig_end;
+ struct memblock_type *mem = &memblock.memory;
+
+ for (i = 0; i < mem->cnt; i++) {
+ orig_start = mem->regions[i].base;
+ orig_end = mem->regions[i].base + mem->regions[i].size;
+ start = round_up(orig_start, align);
+ end = round_down(orig_end, align);
+
+ if (start == orig_start && end == orig_end)
+ continue;
+
+ if (start < end) {
+ mem->regions[i].base = start;
+ mem->regions[i].size = end - start;
+ } else {
+ memblock_remove_region(mem, i);
+ i--;
+ }
+ }
+}
void __init_memblock memblock_set_current_limit(phys_addr_t limit)
{
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index 7acf43b..dd39ba0 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -1055,12 +1055,24 @@
struct mem_cgroup *memcg)
{
struct mem_cgroup_per_zone *mz;
+ struct lruvec *lruvec;
- if (mem_cgroup_disabled())
- return &zone->lruvec;
+ if (mem_cgroup_disabled()) {
+ lruvec = &zone->lruvec;
+ goto out;
+ }
mz = mem_cgroup_zoneinfo(memcg, zone_to_nid(zone), zone_idx(zone));
- return &mz->lruvec;
+ lruvec = &mz->lruvec;
+out:
+ /*
+ * Since a node can be onlined after the mem_cgroup was created,
+ * we have to be prepared to initialize lruvec->zone here;
+ * and if offlined then reonlined, we need to reinitialize it.
+ */
+ if (unlikely(lruvec->zone != zone))
+ lruvec->zone = zone;
+ return lruvec;
}
/*
@@ -1087,9 +1099,12 @@
struct mem_cgroup_per_zone *mz;
struct mem_cgroup *memcg;
struct page_cgroup *pc;
+ struct lruvec *lruvec;
- if (mem_cgroup_disabled())
- return &zone->lruvec;
+ if (mem_cgroup_disabled()) {
+ lruvec = &zone->lruvec;
+ goto out;
+ }
pc = lookup_page_cgroup(page);
memcg = pc->mem_cgroup;
@@ -1107,7 +1122,16 @@
pc->mem_cgroup = memcg = root_mem_cgroup;
mz = page_cgroup_zoneinfo(memcg, page);
- return &mz->lruvec;
+ lruvec = &mz->lruvec;
+out:
+ /*
+ * Since a node can be onlined after the mem_cgroup was created,
+ * we have to be prepared to initialize lruvec->zone here;
+ * and if offlined then reonlined, we need to reinitialize it.
+ */
+ if (unlikely(lruvec->zone != zone))
+ lruvec->zone = zone;
+ return lruvec;
}
/**
@@ -1452,17 +1476,26 @@
static u64 mem_cgroup_get_limit(struct mem_cgroup *memcg)
{
u64 limit;
- u64 memsw;
limit = res_counter_read_u64(&memcg->res, RES_LIMIT);
- limit += total_swap_pages << PAGE_SHIFT;
- memsw = res_counter_read_u64(&memcg->memsw, RES_LIMIT);
/*
- * If memsw is finite and limits the amount of swap space available
- * to this memcg, return that limit.
+ * Do not consider swap space if we cannot swap due to swappiness
*/
- return min(limit, memsw);
+ if (mem_cgroup_swappiness(memcg)) {
+ u64 memsw;
+
+ limit += total_swap_pages << PAGE_SHIFT;
+ memsw = res_counter_read_u64(&memcg->memsw, RES_LIMIT);
+
+ /*
+ * If memsw is finite and limits the amount of swap space
+ * available to this memcg, return that limit.
+ */
+ limit = min(limit, memsw);
+ }
+
+ return limit;
}
void mem_cgroup_out_of_memory(struct mem_cgroup *memcg, gfp_t gfp_mask,
@@ -3688,17 +3721,17 @@
static bool mem_cgroup_force_empty_list(struct mem_cgroup *memcg,
int node, int zid, enum lru_list lru)
{
- struct mem_cgroup_per_zone *mz;
+ struct lruvec *lruvec;
unsigned long flags, loop;
struct list_head *list;
struct page *busy;
struct zone *zone;
zone = &NODE_DATA(node)->node_zones[zid];
- mz = mem_cgroup_zoneinfo(memcg, node, zid);
- list = &mz->lruvec.lists[lru];
+ lruvec = mem_cgroup_zone_lruvec(zone, memcg);
+ list = &lruvec->lists[lru];
- loop = mz->lru_size[lru];
+ loop = mem_cgroup_get_lru_size(lruvec, lru);
/* give some margin against EBUSY etc...*/
loop += 256;
busy = NULL;
@@ -4736,7 +4769,7 @@
for (zone = 0; zone < MAX_NR_ZONES; zone++) {
mz = &pn->zoneinfo[zone];
- lruvec_init(&mz->lruvec, &NODE_DATA(node)->node_zones[zone]);
+ lruvec_init(&mz->lruvec);
mz->usage_in_excess = 0;
mz->on_tree = false;
mz->memcg = memcg;
diff --git a/mm/memory.c b/mm/memory.c
index fb135ba..221fc9f 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -2527,9 +2527,8 @@
int ret = 0;
int page_mkwrite = 0;
struct page *dirty_page = NULL;
- unsigned long mmun_start; /* For mmu_notifiers */
- unsigned long mmun_end; /* For mmu_notifiers */
- bool mmun_called = false; /* For mmu_notifiers */
+ unsigned long mmun_start = 0; /* For mmu_notifiers */
+ unsigned long mmun_end = 0; /* For mmu_notifiers */
old_page = vm_normal_page(vma, address, orig_pte);
if (!old_page) {
@@ -2708,8 +2707,7 @@
goto oom_free_new;
mmun_start = address & PAGE_MASK;
- mmun_end = (address & PAGE_MASK) + PAGE_SIZE;
- mmun_called = true;
+ mmun_end = mmun_start + PAGE_SIZE;
mmu_notifier_invalidate_range_start(mm, mmun_start, mmun_end);
/*
@@ -2778,7 +2776,7 @@
page_cache_release(new_page);
unlock:
pte_unmap_unlock(page_table, ptl);
- if (mmun_called)
+ if (mmun_end > mmun_start)
mmu_notifier_invalidate_range_end(mm, mmun_start, mmun_end);
if (old_page) {
/*
diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
index 56b758a..e4eeaca 100644
--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -106,7 +106,6 @@
void __ref put_page_bootmem(struct page *page)
{
unsigned long type;
- struct zone *zone;
type = (unsigned long) page->lru.next;
BUG_ON(type < MEMORY_HOTPLUG_MIN_BOOTMEM_TYPE ||
@@ -117,12 +116,6 @@
set_page_private(page, 0);
INIT_LIST_HEAD(&page->lru);
__free_pages_bootmem(page, 0);
-
- zone = page_zone(page);
- zone_span_writelock(zone);
- zone->present_pages++;
- zone_span_writeunlock(zone);
- totalram_pages++;
}
}
diff --git a/mm/mmap.c b/mm/mmap.c
index 2d94235..9a796c4 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -334,8 +334,10 @@
struct vm_area_struct *vma = mm->mmap;
while (vma) {
struct anon_vma_chain *avc;
+ vma_lock_anon_vma(vma);
list_for_each_entry(avc, &vma->anon_vma_chain, same_vma)
anon_vma_interval_tree_verify(avc);
+ vma_unlock_anon_vma(vma);
vma = vma->vm_next;
i++;
}
diff --git a/mm/mmu_notifier.c b/mm/mmu_notifier.c
index 479a1e7..8a5ac8c6 100644
--- a/mm/mmu_notifier.c
+++ b/mm/mmu_notifier.c
@@ -196,28 +196,28 @@
BUG_ON(atomic_read(&mm->mm_users) <= 0);
/*
- * Verify that mmu_notifier_init() already run and the global srcu is
- * initialized.
- */
+ * Verify that mmu_notifier_init() already run and the global srcu is
+ * initialized.
+ */
BUG_ON(!srcu.per_cpu_ref);
+ ret = -ENOMEM;
+ mmu_notifier_mm = kmalloc(sizeof(struct mmu_notifier_mm), GFP_KERNEL);
+ if (unlikely(!mmu_notifier_mm))
+ goto out;
+
if (take_mmap_sem)
down_write(&mm->mmap_sem);
ret = mm_take_all_locks(mm);
if (unlikely(ret))
- goto out;
+ goto out_clean;
if (!mm_has_notifiers(mm)) {
- mmu_notifier_mm = kmalloc(sizeof(struct mmu_notifier_mm),
- GFP_KERNEL);
- if (unlikely(!mmu_notifier_mm)) {
- ret = -ENOMEM;
- goto out_of_mem;
- }
INIT_HLIST_HEAD(&mmu_notifier_mm->list);
spin_lock_init(&mmu_notifier_mm->lock);
mm->mmu_notifier_mm = mmu_notifier_mm;
+ mmu_notifier_mm = NULL;
}
atomic_inc(&mm->mm_count);
@@ -233,12 +233,12 @@
hlist_add_head(&mn->hlist, &mm->mmu_notifier_mm->list);
spin_unlock(&mm->mmu_notifier_mm->lock);
-out_of_mem:
mm_drop_all_locks(mm);
-out:
+out_clean:
if (take_mmap_sem)
up_write(&mm->mmap_sem);
-
+ kfree(mmu_notifier_mm);
+out:
BUG_ON(atomic_read(&mm->mm_users) <= 0);
return ret;
}
diff --git a/mm/mmzone.c b/mm/mmzone.c
index 3cef80f..4596d81 100644
--- a/mm/mmzone.c
+++ b/mm/mmzone.c
@@ -87,7 +87,7 @@
}
#endif /* CONFIG_ARCH_HAS_HOLES_MEMORYMODEL */
-void lruvec_init(struct lruvec *lruvec, struct zone *zone)
+void lruvec_init(struct lruvec *lruvec)
{
enum lru_list lru;
@@ -95,8 +95,4 @@
for_each_lru(lru)
INIT_LIST_HEAD(&lruvec->lists[lru]);
-
-#ifdef CONFIG_MEMCG
- lruvec->zone = zone;
-#endif
}
diff --git a/mm/nobootmem.c b/mm/nobootmem.c
index 714d5d6..bd82f6b 100644
--- a/mm/nobootmem.c
+++ b/mm/nobootmem.c
@@ -116,8 +116,6 @@
return 0;
__free_pages_memory(start_pfn, end_pfn);
- fixup_zone_present_pages(pfn_to_nid(start >> PAGE_SHIFT),
- start_pfn, end_pfn);
return end_pfn - start_pfn;
}
@@ -128,7 +126,6 @@
phys_addr_t start, end, size;
u64 i;
- reset_zone_present_pages();
for_each_free_mem_range(i, MAX_NUMNODES, &start, &end, NULL)
count += __free_memory_core(start, end);
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index bb90971..bcb72c6 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -1405,7 +1405,7 @@
mt = get_pageblock_migratetype(page);
if (unlikely(mt != MIGRATE_ISOLATE))
- __mod_zone_freepage_state(zone, -(1UL << order), mt);
+ __mod_zone_freepage_state(zone, -(1UL << alloc_order), mt);
if (alloc_order != order)
expand(zone, page, alloc_order, order,
@@ -1809,10 +1809,10 @@
int i;
for_each_online_node(i)
- if (node_distance(nid, i) <= RECLAIM_DISTANCE) {
+ if (node_distance(nid, i) <= RECLAIM_DISTANCE)
node_set(i, NODE_DATA(nid)->reclaim_nodes);
+ else
zone_reclaim_mode = 1;
- }
}
#else /* CONFIG_NUMA */
@@ -4505,7 +4505,7 @@
zone->zone_pgdat = pgdat;
zone_pcp_init(zone);
- lruvec_init(&zone->lruvec, zone);
+ lruvec_init(&zone->lruvec);
if (!size)
continue;
@@ -5825,7 +5825,7 @@
ret = start_isolate_page_range(pfn_max_align_down(start),
pfn_max_align_up(end), migratetype);
if (ret)
- goto done;
+ return ret;
ret = __alloc_contig_migrate_range(&cc, start, end);
if (ret)
@@ -6098,37 +6098,3 @@
dump_page_flags(page->flags);
mem_cgroup_print_bad_page(page);
}
-
-/* reset zone->present_pages */
-void reset_zone_present_pages(void)
-{
- struct zone *z;
- int i, nid;
-
- for_each_node_state(nid, N_HIGH_MEMORY) {
- for (i = 0; i < MAX_NR_ZONES; i++) {
- z = NODE_DATA(nid)->node_zones + i;
- z->present_pages = 0;
- }
- }
-}
-
-/* calculate zone's present pages in buddy system */
-void fixup_zone_present_pages(int nid, unsigned long start_pfn,
- unsigned long end_pfn)
-{
- struct zone *z;
- unsigned long zone_start_pfn, zone_end_pfn;
- int i;
-
- for (i = 0; i < MAX_NR_ZONES; i++) {
- z = NODE_DATA(nid)->node_zones + i;
- zone_start_pfn = z->zone_start_pfn;
- zone_end_pfn = zone_start_pfn + z->spanned_pages;
-
- /* if the two regions intersect */
- if (!(zone_start_pfn >= end_pfn || zone_end_pfn <= start_pfn))
- z->present_pages += min(end_pfn, zone_end_pfn) -
- max(start_pfn, zone_start_pfn);
- }
-}
diff --git a/mm/rmap.c b/mm/rmap.c
index 7df7984..2ee1ef0 100644
--- a/mm/rmap.c
+++ b/mm/rmap.c
@@ -56,6 +56,7 @@
#include <linux/mmu_notifier.h>
#include <linux/migrate.h>
#include <linux/hugetlb.h>
+#include <linux/backing-dev.h>
#include <asm/tlbflush.h>
@@ -926,11 +927,8 @@
if (page_mapped(page)) {
struct address_space *mapping = page_mapping(page);
- if (mapping) {
+ if (mapping)
ret = page_mkclean_file(mapping, page);
- if (page_test_and_clear_dirty(page_to_pfn(page), 1))
- ret = 1;
- }
}
return ret;
@@ -1116,6 +1114,7 @@
*/
void page_remove_rmap(struct page *page)
{
+ struct address_space *mapping = page_mapping(page);
bool anon = PageAnon(page);
bool locked;
unsigned long flags;
@@ -1138,8 +1137,19 @@
* this if the page is anon, so about to be freed; but perhaps
* not if it's in swapcache - there might be another pte slot
* containing the swap entry, but page not yet written to swap.
+ *
+ * And we can skip it on file pages, so long as the filesystem
+ * participates in dirty tracking; but need to catch shm and tmpfs
+ * and ramfs pages which have been modified since creation by read
+ * fault.
+ *
+ * Note that mapping must be decided above, before decrementing
+ * mapcount (which luckily provides a barrier): once page is unmapped,
+ * it could be truncated and page->mapping reset to NULL at any moment.
+ * Note also that we are relying on page_mapping(page) to set mapping
+ * to &swapper_space when PageSwapCache(page).
*/
- if ((!anon || PageSwapCache(page)) &&
+ if (mapping && !mapping_cap_account_dirty(mapping) &&
page_test_and_clear_dirty(page_to_pfn(page), 1))
set_page_dirty(page);
/*
diff --git a/mm/shmem.c b/mm/shmem.c
index 67afba5..89341b6 100644
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -643,7 +643,7 @@
kfree(info->symlink);
simple_xattrs_free(&info->xattrs);
- BUG_ON(inode->i_blocks);
+ WARN_ON(inode->i_blocks);
shmem_free_inode(inode->i_sb);
clear_inode(inode);
}
@@ -1145,8 +1145,20 @@
if (!error) {
error = shmem_add_to_page_cache(page, mapping, index,
gfp, swp_to_radix_entry(swap));
- /* We already confirmed swap, and make no allocation */
- VM_BUG_ON(error);
+ /*
+ * We already confirmed swap under page lock, and make
+ * no memory allocation here, so usually no possibility
+ * of error; but free_swap_and_cache() only trylocks a
+ * page, so it is just possible that the entry has been
+ * truncated or holepunched since swap was confirmed.
+ * shmem_undo_range() will have done some of the
+ * unaccounting, now delete_from_swap_cache() will do
+ * the rest (including mem_cgroup_uncharge_swapcache).
+ * Reset swap.val? No, leave it so "failed" goes back to
+ * "repeat": reading a hole and writing should succeed.
+ */
+ if (error)
+ delete_from_swap_cache(page);
}
if (error)
goto failed;
diff --git a/mm/swapfile.c b/mm/swapfile.c
index 71cd288..f91a255 100644
--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -1494,9 +1494,8 @@
BUG_ON(!current->mm);
pathname = getname(specialfile);
- err = PTR_ERR(pathname);
if (IS_ERR(pathname))
- goto out;
+ return PTR_ERR(pathname);
victim = file_open_name(pathname, O_RDWR|O_LARGEFILE, 0);
err = PTR_ERR(victim);
@@ -1608,6 +1607,7 @@
out_dput:
filp_close(victim, NULL);
out:
+ putname(pathname);
return err;
}
diff --git a/mm/vmscan.c b/mm/vmscan.c
index 2624edc..48550c6 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -1760,28 +1760,6 @@
return false;
}
-#ifdef CONFIG_COMPACTION
-/*
- * If compaction is deferred for sc->order then scale the number of pages
- * reclaimed based on the number of consecutive allocation failures
- */
-static unsigned long scale_for_compaction(unsigned long pages_for_compaction,
- struct lruvec *lruvec, struct scan_control *sc)
-{
- struct zone *zone = lruvec_zone(lruvec);
-
- if (zone->compact_order_failed <= sc->order)
- pages_for_compaction <<= zone->compact_defer_shift;
- return pages_for_compaction;
-}
-#else
-static unsigned long scale_for_compaction(unsigned long pages_for_compaction,
- struct lruvec *lruvec, struct scan_control *sc)
-{
- return pages_for_compaction;
-}
-#endif
-
/*
* Reclaim/compaction is used for high-order allocation requests. It reclaims
* order-0 pages before compacting the zone. should_continue_reclaim() returns
@@ -1829,9 +1807,6 @@
* inactive lists are large enough, continue reclaiming
*/
pages_for_compaction = (2UL << sc->order);
-
- pages_for_compaction = scale_for_compaction(pages_for_compaction,
- lruvec, sc);
inactive_lru_pages = get_lru_size(lruvec, LRU_INACTIVE_FILE);
if (nr_swap_pages > 0)
inactive_lru_pages += get_lru_size(lruvec, LRU_INACTIVE_ANON);
@@ -3017,6 +2992,8 @@
&balanced_classzone_idx);
}
}
+
+ current->reclaim_state = NULL;
return 0;
}
diff --git a/net/8021q/vlan.c b/net/8021q/vlan.c
index 9096bcb..ee07072 100644
--- a/net/8021q/vlan.c
+++ b/net/8021q/vlan.c
@@ -463,7 +463,9 @@
case NETDEV_PRE_TYPE_CHANGE:
/* Forbid underlaying device to change its type. */
- return NOTIFY_BAD;
+ if (vlan_uses_dev(dev))
+ return NOTIFY_BAD;
+ break;
case NETDEV_NOTIFY_PEERS:
case NETDEV_BONDING_FAILOVER:
diff --git a/net/batman-adv/bridge_loop_avoidance.c b/net/batman-adv/bridge_loop_avoidance.c
index 0a9084a..fd8d5af 100644
--- a/net/batman-adv/bridge_loop_avoidance.c
+++ b/net/batman-adv/bridge_loop_avoidance.c
@@ -1167,6 +1167,8 @@
uint16_t crc;
unsigned long entrytime;
+ spin_lock_init(&bat_priv->bla.bcast_duplist_lock);
+
batadv_dbg(BATADV_DBG_BLA, bat_priv, "bla hash registering\n");
/* setting claim destination address */
@@ -1210,8 +1212,8 @@
/**
* batadv_bla_check_bcast_duplist
* @bat_priv: the bat priv with all the soft interface information
- * @bcast_packet: originator mac address
- * @hdr_size: maximum length of the frame
+ * @bcast_packet: encapsulated broadcast frame plus batman header
+ * @bcast_packet_len: length of encapsulated broadcast frame plus batman header
*
* check if it is on our broadcast list. Another gateway might
* have sent the same packet because it is connected to the same backbone,
@@ -1224,20 +1226,22 @@
*/
int batadv_bla_check_bcast_duplist(struct batadv_priv *bat_priv,
struct batadv_bcast_packet *bcast_packet,
- int hdr_size)
+ int bcast_packet_len)
{
- int i, length, curr;
+ int i, length, curr, ret = 0;
uint8_t *content;
uint16_t crc;
struct batadv_bcast_duplist_entry *entry;
- length = hdr_size - sizeof(*bcast_packet);
+ length = bcast_packet_len - sizeof(*bcast_packet);
content = (uint8_t *)bcast_packet;
content += sizeof(*bcast_packet);
/* calculate the crc ... */
crc = crc16(0, content, length);
+ spin_lock_bh(&bat_priv->bla.bcast_duplist_lock);
+
for (i = 0; i < BATADV_DUPLIST_SIZE; i++) {
curr = (bat_priv->bla.bcast_duplist_curr + i);
curr %= BATADV_DUPLIST_SIZE;
@@ -1259,9 +1263,12 @@
/* this entry seems to match: same crc, not too old,
* and from another gw. therefore return 1 to forbid it.
*/
- return 1;
+ ret = 1;
+ goto out;
}
- /* not found, add a new entry (overwrite the oldest entry) */
+ /* not found, add a new entry (overwrite the oldest entry)
+ * and allow it, its the first occurence.
+ */
curr = (bat_priv->bla.bcast_duplist_curr + BATADV_DUPLIST_SIZE - 1);
curr %= BATADV_DUPLIST_SIZE;
entry = &bat_priv->bla.bcast_duplist[curr];
@@ -1270,8 +1277,10 @@
memcpy(entry->orig, bcast_packet->orig, ETH_ALEN);
bat_priv->bla.bcast_duplist_curr = curr;
- /* allow it, its the first occurence. */
- return 0;
+out:
+ spin_unlock_bh(&bat_priv->bla.bcast_duplist_lock);
+
+ return ret;
}
diff --git a/net/batman-adv/routing.c b/net/batman-adv/routing.c
index 939fc01..376b4cc 100644
--- a/net/batman-adv/routing.c
+++ b/net/batman-adv/routing.c
@@ -1124,8 +1124,14 @@
spin_unlock_bh(&orig_node->bcast_seqno_lock);
+ /* keep skb linear for crc calculation */
+ if (skb_linearize(skb) < 0)
+ goto out;
+
+ bcast_packet = (struct batadv_bcast_packet *)skb->data;
+
/* check whether this has been sent by another originator before */
- if (batadv_bla_check_bcast_duplist(bat_priv, bcast_packet, hdr_size))
+ if (batadv_bla_check_bcast_duplist(bat_priv, bcast_packet, skb->len))
goto out;
/* rebroadcast packet */
diff --git a/net/batman-adv/soft-interface.c b/net/batman-adv/soft-interface.c
index b9a28d2..ce0684a 100644
--- a/net/batman-adv/soft-interface.c
+++ b/net/batman-adv/soft-interface.c
@@ -325,6 +325,12 @@
soft_iface->last_rx = jiffies;
+ /* Let the bridge loop avoidance check the packet. If will
+ * not handle it, we can safely push it up.
+ */
+ if (batadv_bla_rx(bat_priv, skb, vid, is_bcast))
+ goto out;
+
if (orig_node)
batadv_tt_add_temporary_global_entry(bat_priv, orig_node,
ethhdr->h_source);
@@ -332,12 +338,6 @@
if (batadv_is_ap_isolated(bat_priv, ethhdr->h_source, ethhdr->h_dest))
goto dropped;
- /* Let the bridge loop avoidance check the packet. If will
- * not handle it, we can safely push it up.
- */
- if (batadv_bla_rx(bat_priv, skb, vid, is_bcast))
- goto out;
-
netif_rx(skb);
goto out;
diff --git a/net/batman-adv/translation-table.c b/net/batman-adv/translation-table.c
index 112edd3..baae715 100644
--- a/net/batman-adv/translation-table.c
+++ b/net/batman-adv/translation-table.c
@@ -769,6 +769,12 @@
*/
tt_global_entry->common.flags &= ~BATADV_TT_CLIENT_TEMP;
+ /* the change can carry possible "attribute" flags like the
+ * TT_CLIENT_WIFI, therefore they have to be copied in the
+ * client entry
+ */
+ tt_global_entry->common.flags |= flags;
+
/* If there is the BATADV_TT_CLIENT_ROAM flag set, there is only
* one originator left in the list and we previously received a
* delete + roaming change for this originator.
@@ -1496,7 +1502,7 @@
memcpy(tt_change->addr, tt_common_entry->addr,
ETH_ALEN);
- tt_change->flags = BATADV_NO_FLAGS;
+ tt_change->flags = tt_common_entry->flags;
tt_count++;
tt_change++;
@@ -2450,6 +2456,13 @@
{
bool ret = false;
+ /* if the originator is a backbone node (meaning it belongs to the same
+ * LAN of this node) the temporary client must not be added because to
+ * reach such destination the node must use the LAN instead of the mesh
+ */
+ if (batadv_bla_is_backbone_gw_orig(bat_priv, orig_node->orig))
+ goto out;
+
if (!batadv_tt_global_add(bat_priv, orig_node, addr,
BATADV_TT_CLIENT_TEMP,
atomic_read(&orig_node->last_ttvn)))
diff --git a/net/batman-adv/types.h b/net/batman-adv/types.h
index 2ed82ca..ac1e07a 100644
--- a/net/batman-adv/types.h
+++ b/net/batman-adv/types.h
@@ -205,6 +205,8 @@
struct batadv_hashtable *backbone_hash;
struct batadv_bcast_duplist_entry bcast_duplist[BATADV_DUPLIST_SIZE];
int bcast_duplist_curr;
+ /* protects bcast_duplist and bcast_duplist_curr */
+ spinlock_t bcast_duplist_lock;
struct batadv_bla_claim_dst claim_dest;
struct delayed_work work;
};
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index 8a0ce70..a0a2f97 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -1754,11 +1754,11 @@
if (hdev->dev_type != HCI_AMP)
set_bit(HCI_AUTO_OFF, &hdev->dev_flags);
- schedule_work(&hdev->power_on);
-
hci_notify(hdev, HCI_DEV_REG);
hci_dev_hold(hdev);
+ schedule_work(&hdev->power_on);
+
return id;
err_wqueue:
diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c
index aa2ea0a..91de423 100644
--- a/net/bluetooth/mgmt.c
+++ b/net/bluetooth/mgmt.c
@@ -326,7 +326,7 @@
struct hci_dev *d;
size_t rp_len;
u16 count;
- int i, err;
+ int err;
BT_DBG("sock %p", sk);
@@ -347,9 +347,7 @@
return -ENOMEM;
}
- rp->num_controllers = cpu_to_le16(count);
-
- i = 0;
+ count = 0;
list_for_each_entry(d, &hci_dev_list, list) {
if (test_bit(HCI_SETUP, &d->dev_flags))
continue;
@@ -357,10 +355,13 @@
if (!mgmt_valid_hdev(d))
continue;
- rp->index[i++] = cpu_to_le16(d->id);
+ rp->index[count++] = cpu_to_le16(d->id);
BT_DBG("Added hci%u", d->id);
}
+ rp->num_controllers = cpu_to_le16(count);
+ rp_len = sizeof(*rp) + (2 * count);
+
read_unlock(&hci_dev_list_lock);
err = cmd_complete(sk, MGMT_INDEX_NONE, MGMT_OP_READ_INDEX_LIST, 0, rp,
@@ -1366,6 +1367,7 @@
continue;
list_del(&match->list);
+ kfree(match);
found++;
}
diff --git a/net/bluetooth/smp.c b/net/bluetooth/smp.c
index 8c225ef..a592337 100644
--- a/net/bluetooth/smp.c
+++ b/net/bluetooth/smp.c
@@ -32,6 +32,8 @@
#define SMP_TIMEOUT msecs_to_jiffies(30000)
+#define AUTH_REQ_MASK 0x07
+
static inline void swap128(u8 src[16], u8 dst[16])
{
int i;
@@ -230,7 +232,7 @@
req->max_key_size = SMP_MAX_ENC_KEY_SIZE;
req->init_key_dist = 0;
req->resp_key_dist = dist_keys;
- req->auth_req = authreq;
+ req->auth_req = (authreq & AUTH_REQ_MASK);
return;
}
@@ -239,7 +241,7 @@
rsp->max_key_size = SMP_MAX_ENC_KEY_SIZE;
rsp->init_key_dist = 0;
rsp->resp_key_dist = req->resp_key_dist & dist_keys;
- rsp->auth_req = authreq;
+ rsp->auth_req = (authreq & AUTH_REQ_MASK);
}
static u8 check_enc_key_size(struct l2cap_conn *conn, __u8 max_key_size)
@@ -265,7 +267,7 @@
clear_bit(HCI_CONN_ENCRYPT_PEND, &conn->hcon->flags);
mgmt_auth_failed(conn->hcon->hdev, conn->dst, hcon->type,
- hcon->dst_type, reason);
+ hcon->dst_type, HCI_ERROR_AUTH_FAILURE);
cancel_delayed_work_sync(&conn->security_timer);
diff --git a/net/ceph/messenger.c b/net/ceph/messenger.c
index 159aa8b..3ef1759 100644
--- a/net/ceph/messenger.c
+++ b/net/ceph/messenger.c
@@ -2300,10 +2300,11 @@
mutex_unlock(&con->mutex);
return;
} else {
- con->ops->put(con);
dout("con_work %p FAILED to back off %lu\n", con,
con->delay);
+ set_bit(CON_FLAG_BACKOFF, &con->flags);
}
+ goto done;
}
if (con->state == CON_STATE_STANDBY) {
@@ -2749,7 +2750,8 @@
msg = con->ops->alloc_msg(con, hdr, skip);
mutex_lock(&con->mutex);
if (con->state != CON_STATE_OPEN) {
- ceph_msg_put(msg);
+ if (msg)
+ ceph_msg_put(msg);
return -EAGAIN;
}
con->in_msg = msg;
diff --git a/net/core/dev.c b/net/core/dev.c
index 09cb3f6..c0946cb 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -1666,7 +1666,7 @@
static inline bool skb_loop_sk(struct packet_type *ptype, struct sk_buff *skb)
{
- if (ptype->af_packet_priv == NULL)
+ if (!ptype->af_packet_priv || !skb->sk)
return false;
if (ptype->id_match)
@@ -2818,8 +2818,10 @@
if (unlikely(tcpu != next_cpu) &&
(tcpu == RPS_NO_CPU || !cpu_online(tcpu) ||
((int)(per_cpu(softnet_data, tcpu).input_queue_head -
- rflow->last_qtail)) >= 0))
+ rflow->last_qtail)) >= 0)) {
+ tcpu = next_cpu;
rflow = set_rps_cpu(dev, skb, rflow, next_cpu);
+ }
if (tcpu != RPS_NO_CPU && cpu_online(tcpu)) {
*rflowp = rflow;
diff --git a/net/core/dev_addr_lists.c b/net/core/dev_addr_lists.c
index 87cc17d..b079c7b 100644
--- a/net/core/dev_addr_lists.c
+++ b/net/core/dev_addr_lists.c
@@ -319,7 +319,8 @@
*/
ha = list_first_entry(&dev->dev_addrs.list,
struct netdev_hw_addr, list);
- if (ha->addr == dev->dev_addr && ha->refcount == 1)
+ if (!memcmp(ha->addr, addr, dev->addr_len) &&
+ ha->type == addr_type && ha->refcount == 1)
return -ENOENT;
err = __hw_addr_del(&dev->dev_addrs, addr, dev->addr_len,
diff --git a/net/core/net-sysfs.c b/net/core/net-sysfs.c
index bcf02f6..017a8ba 100644
--- a/net/core/net-sysfs.c
+++ b/net/core/net-sysfs.c
@@ -429,6 +429,17 @@
.name = "statistics",
.attrs = netstat_attrs,
};
+
+#if IS_ENABLED(CONFIG_WIRELESS_EXT) || IS_ENABLED(CONFIG_CFG80211)
+static struct attribute *wireless_attrs[] = {
+ NULL
+};
+
+static struct attribute_group wireless_group = {
+ .name = "wireless",
+ .attrs = wireless_attrs,
+};
+#endif
#endif /* CONFIG_SYSFS */
#ifdef CONFIG_RPS
@@ -1409,6 +1420,15 @@
groups++;
*groups++ = &netstat_group;
+
+#if IS_ENABLED(CONFIG_WIRELESS_EXT) || IS_ENABLED(CONFIG_CFG80211)
+ if (net->ieee80211_ptr)
+ *groups++ = &wireless_group;
+#if IS_ENABLED(CONFIG_WIRELESS_EXT)
+ else if (net->wireless_handlers)
+ *groups++ = &wireless_group;
+#endif
+#endif
#endif /* CONFIG_SYSFS */
error = device_add(dev);
diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c
index 76d4c2c..fad649a 100644
--- a/net/core/rtnetlink.c
+++ b/net/core/rtnetlink.c
@@ -2192,7 +2192,8 @@
goto skip;
err = nlmsg_populate_fdb_fill(skb, dev, ha->addr,
- portid, seq, 0, NTF_SELF);
+ portid, seq,
+ RTM_NEWNEIGH, NTF_SELF);
if (err < 0)
return err;
skip:
diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index 6e04b1f..4007c14 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -3379,10 +3379,12 @@
void kfree_skb_partial(struct sk_buff *skb, bool head_stolen)
{
- if (head_stolen)
+ if (head_stolen) {
+ skb_release_head_state(skb);
kmem_cache_free(skbuff_head_cache, skb);
- else
+ } else {
__kfree_skb(skb);
+ }
}
EXPORT_SYMBOL(kfree_skb_partial);
diff --git a/net/ipv4/inet_diag.c b/net/ipv4/inet_diag.c
index 535584c..0c34bfa 100644
--- a/net/ipv4/inet_diag.c
+++ b/net/ipv4/inet_diag.c
@@ -892,13 +892,16 @@
struct inet_diag_req_v2 *r, struct nlattr *bc)
{
const struct inet_diag_handler *handler;
+ int err = 0;
handler = inet_diag_lock_handler(r->sdiag_protocol);
if (!IS_ERR(handler))
handler->dump(skb, cb, r, bc);
+ else
+ err = PTR_ERR(handler);
inet_diag_unlock_handler(handler);
- return skb->len;
+ return err ? : skb->len;
}
static int inet_diag_dump(struct sk_buff *skb, struct netlink_callback *cb)
diff --git a/net/ipv4/ip_sockglue.c b/net/ipv4/ip_sockglue.c
index 5eea4a8..14bbfcf 100644
--- a/net/ipv4/ip_sockglue.c
+++ b/net/ipv4/ip_sockglue.c
@@ -457,19 +457,28 @@
struct inet_sock *inet = inet_sk(sk);
int val = 0, err;
- if (((1<<optname) & ((1<<IP_PKTINFO) | (1<<IP_RECVTTL) |
- (1<<IP_RECVOPTS) | (1<<IP_RECVTOS) |
- (1<<IP_RETOPTS) | (1<<IP_TOS) |
- (1<<IP_TTL) | (1<<IP_HDRINCL) |
- (1<<IP_MTU_DISCOVER) | (1<<IP_RECVERR) |
- (1<<IP_ROUTER_ALERT) | (1<<IP_FREEBIND) |
- (1<<IP_PASSSEC) | (1<<IP_TRANSPARENT) |
- (1<<IP_MINTTL) | (1<<IP_NODEFRAG))) ||
- optname == IP_UNICAST_IF ||
- optname == IP_MULTICAST_TTL ||
- optname == IP_MULTICAST_ALL ||
- optname == IP_MULTICAST_LOOP ||
- optname == IP_RECVORIGDSTADDR) {
+ switch (optname) {
+ case IP_PKTINFO:
+ case IP_RECVTTL:
+ case IP_RECVOPTS:
+ case IP_RECVTOS:
+ case IP_RETOPTS:
+ case IP_TOS:
+ case IP_TTL:
+ case IP_HDRINCL:
+ case IP_MTU_DISCOVER:
+ case IP_RECVERR:
+ case IP_ROUTER_ALERT:
+ case IP_FREEBIND:
+ case IP_PASSSEC:
+ case IP_TRANSPARENT:
+ case IP_MINTTL:
+ case IP_NODEFRAG:
+ case IP_UNICAST_IF:
+ case IP_MULTICAST_TTL:
+ case IP_MULTICAST_ALL:
+ case IP_MULTICAST_LOOP:
+ case IP_RECVORIGDSTADDR:
if (optlen >= sizeof(int)) {
if (get_user(val, (int __user *) optval))
return -EFAULT;
diff --git a/net/ipv4/ip_vti.c b/net/ipv4/ip_vti.c
index 1831092..858fddf 100644
--- a/net/ipv4/ip_vti.c
+++ b/net/ipv4/ip_vti.c
@@ -338,12 +338,17 @@
if (tunnel != NULL) {
struct pcpu_tstats *tstats;
+ if (!xfrm4_policy_check(NULL, XFRM_POLICY_IN, skb))
+ return -1;
+
tstats = this_cpu_ptr(tunnel->dev->tstats);
u64_stats_update_begin(&tstats->syncp);
tstats->rx_packets++;
tstats->rx_bytes += skb->len;
u64_stats_update_end(&tstats->syncp);
+ skb->mark = 0;
+ secpath_reset(skb);
skb->dev = tunnel->dev;
return 1;
}
diff --git a/net/ipv4/netfilter/iptable_nat.c b/net/ipv4/netfilter/iptable_nat.c
index 9e0ffaf..a820472 100644
--- a/net/ipv4/netfilter/iptable_nat.c
+++ b/net/ipv4/netfilter/iptable_nat.c
@@ -184,7 +184,8 @@
if ((ct->tuplehash[dir].tuple.src.u3.ip !=
ct->tuplehash[!dir].tuple.dst.u3.ip) ||
- (ct->tuplehash[dir].tuple.src.u.all !=
+ (ct->tuplehash[dir].tuple.dst.protonum != IPPROTO_ICMP &&
+ ct->tuplehash[dir].tuple.src.u.all !=
ct->tuplehash[!dir].tuple.dst.u.all))
if (nf_xfrm_me_harder(skb, AF_INET) < 0)
ret = NF_DROP;
@@ -221,6 +222,7 @@
}
#ifdef CONFIG_XFRM
else if (!(IPCB(skb)->flags & IPSKB_XFRM_TRANSFORMED) &&
+ ct->tuplehash[dir].tuple.dst.protonum != IPPROTO_ICMP &&
ct->tuplehash[dir].tuple.dst.u.all !=
ct->tuplehash[!dir].tuple.src.u.all)
if (nf_xfrm_me_harder(skb, AF_INET) < 0)
diff --git a/net/ipv4/route.c b/net/ipv4/route.c
index 432f4bb..df25142 100644
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -1163,8 +1163,12 @@
spin_lock_bh(&fnhe_lock);
if (daddr == fnhe->fnhe_daddr) {
- struct rtable *orig;
-
+ struct rtable *orig = rcu_dereference(fnhe->fnhe_rth);
+ if (orig && rt_is_expired(orig)) {
+ fnhe->fnhe_gw = 0;
+ fnhe->fnhe_pmtu = 0;
+ fnhe->fnhe_expires = 0;
+ }
if (fnhe->fnhe_pmtu) {
unsigned long expires = fnhe->fnhe_expires;
unsigned long diff = expires - jiffies;
@@ -1181,7 +1185,6 @@
} else if (!rt->rt_gateway)
rt->rt_gateway = daddr;
- orig = rcu_dereference(fnhe->fnhe_rth);
rcu_assign_pointer(fnhe->fnhe_rth, rt);
if (orig)
rt_free(orig);
@@ -1782,6 +1785,7 @@
if (dev_out->flags & IFF_LOOPBACK)
flags |= RTCF_LOCAL;
+ do_cache = true;
if (type == RTN_BROADCAST) {
flags |= RTCF_BROADCAST | RTCF_LOCAL;
fi = NULL;
@@ -1790,6 +1794,8 @@
if (!ip_check_mc_rcu(in_dev, fl4->daddr, fl4->saddr,
fl4->flowi4_proto))
flags &= ~RTCF_LOCAL;
+ else
+ do_cache = false;
/* If multicast route do not exist use
* default one, but do not gateway in this case.
* Yes, it is hack.
@@ -1799,8 +1805,8 @@
}
fnhe = NULL;
- do_cache = fi != NULL;
- if (fi) {
+ do_cache &= fi != NULL;
+ if (do_cache) {
struct rtable __rcu **prth;
struct fib_nh *nh = &FIB_RES_NH(*res);
@@ -2594,7 +2600,7 @@
pr_err("Unable to create route proc files\n");
#ifdef CONFIG_XFRM
xfrm_init();
- xfrm4_init(ip_rt_max_size);
+ xfrm4_init();
#endif
rtnl_register(PF_INET, RTM_GETROUTE, inet_rtm_getroute, NULL, NULL);
diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index f32c02e..083092e 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -549,14 +549,12 @@
!tp->urg_data ||
before(tp->urg_seq, tp->copied_seq) ||
!before(tp->urg_seq, tp->rcv_nxt)) {
- struct sk_buff *skb;
answ = tp->rcv_nxt - tp->copied_seq;
- /* Subtract 1, if FIN is in queue. */
- skb = skb_peek_tail(&sk->sk_receive_queue);
- if (answ && skb)
- answ -= tcp_hdr(skb)->fin;
+ /* Subtract 1, if FIN was received */
+ if (answ && sock_flag(sk, SOCK_DONE))
+ answ--;
} else
answ = tp->urg_seq - tp->copied_seq;
release_sock(sk);
@@ -1214,7 +1212,7 @@
wait_for_sndbuf:
set_bit(SOCK_NOSPACE, &sk->sk_socket->flags);
wait_for_memory:
- if (copied && likely(!tp->repair))
+ if (copied)
tcp_push(sk, flags & ~MSG_MORE, mss_now, TCP_NAGLE_PUSH);
if ((err = sk_stream_wait_memory(sk, &timeo)) != 0)
@@ -1225,7 +1223,7 @@
}
out:
- if (copied && likely(!tp->repair))
+ if (copied)
tcp_push(sk, flags, mss_now, tp->nonagle);
release_sock(sk);
return copied + copied_syn;
@@ -2766,6 +2764,8 @@
info->tcpi_options |= TCPI_OPT_ECN;
if (tp->ecn_flags & TCP_ECN_SEEN)
info->tcpi_options |= TCPI_OPT_ECN_SEEN;
+ if (tp->syn_data_acked)
+ info->tcpi_options |= TCPI_OPT_SYN_DATA;
info->tcpi_rto = jiffies_to_usecs(icsk->icsk_rto);
info->tcpi_ato = jiffies_to_usecs(icsk->icsk_ack.ato);
diff --git a/net/ipv4/tcp_illinois.c b/net/ipv4/tcp_illinois.c
index 813b43a..834857f 100644
--- a/net/ipv4/tcp_illinois.c
+++ b/net/ipv4/tcp_illinois.c
@@ -313,11 +313,13 @@
.tcpv_rttcnt = ca->cnt_rtt,
.tcpv_minrtt = ca->base_rtt,
};
- u64 t = ca->sum_rtt;
- do_div(t, ca->cnt_rtt);
- info.tcpv_rtt = t;
+ if (info.tcpv_rttcnt > 0) {
+ u64 t = ca->sum_rtt;
+ do_div(t, info.tcpv_rttcnt);
+ info.tcpv_rtt = t;
+ }
nla_put(skb, INET_DIAG_VEGASINFO, sizeof(info), &info);
}
}
diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
index 432c366..609ff98 100644
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -4529,6 +4529,9 @@
struct tcphdr *th;
bool fragstolen;
+ if (size == 0)
+ return 0;
+
skb = alloc_skb(size + sizeof(*th), sk->sk_allocation);
if (!skb)
goto err;
@@ -5310,11 +5313,6 @@
goto discard;
}
- /* ts_recent update must be made after we are sure that the packet
- * is in window.
- */
- tcp_replace_ts_recent(tp, TCP_SKB_CB(skb)->seq);
-
/* step 3: check security and precedence [ignored] */
/* step 4: Check for a SYN
@@ -5549,6 +5547,11 @@
if (th->ack && tcp_ack(sk, skb, FLAG_SLOWPATH) < 0)
goto discard;
+ /* ts_recent update must be made after we are sure that the packet
+ * is in window.
+ */
+ tcp_replace_ts_recent(tp, TCP_SKB_CB(skb)->seq);
+
tcp_rcv_rtt_measure_ts(sk, skb);
/* Process urgent data. */
@@ -5646,6 +5649,7 @@
tcp_rearm_rto(sk);
return true;
}
+ tp->syn_data_acked = tp->syn_data;
return false;
}
@@ -5963,7 +5967,7 @@
req = tp->fastopen_rsk;
if (req != NULL) {
- BUG_ON(sk->sk_state != TCP_SYN_RECV &&
+ WARN_ON_ONCE(sk->sk_state != TCP_SYN_RECV &&
sk->sk_state != TCP_FIN_WAIT1);
if (tcp_check_req(sk, skb, req, NULL, true) == NULL)
@@ -6052,7 +6056,15 @@
* ACK we have received, this would have acknowledged
* our SYNACK so stop the SYNACK timer.
*/
- if (acceptable && req != NULL) {
+ if (req != NULL) {
+ /* Return RST if ack_seq is invalid.
+ * Note that RFC793 only says to generate a
+ * DUPACK for it but for TCP Fast Open it seems
+ * better to treat this case like TCP_SYN_RECV
+ * above.
+ */
+ if (!acceptable)
+ return 1;
/* We no longer need the request sock. */
reqsk_fastopen_remove(sk, req, false);
tcp_rearm_rto(sk);
@@ -6118,6 +6130,11 @@
} else
goto discard;
+ /* ts_recent update must be made after we are sure that the packet
+ * is in window.
+ */
+ tcp_replace_ts_recent(tp, TCP_SKB_CB(skb)->seq);
+
/* step 6: check the URG bit */
tcp_urg(sk, skb, th);
diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c
index ef998b0..0c4a643 100644
--- a/net/ipv4/tcp_ipv4.c
+++ b/net/ipv4/tcp_ipv4.c
@@ -1461,6 +1461,7 @@
skb_set_owner_r(skb, child);
__skb_queue_tail(&child->sk_receive_queue, skb);
tp->rcv_nxt = TCP_SKB_CB(skb)->end_seq;
+ tp->syn_data_acked = 1;
}
sk->sk_data_ready(sk, 0);
bh_unlock_sock(child);
diff --git a/net/ipv4/tcp_metrics.c b/net/ipv4/tcp_metrics.c
index 4c752a6..f696d7c 100644
--- a/net/ipv4/tcp_metrics.c
+++ b/net/ipv4/tcp_metrics.c
@@ -1,7 +1,6 @@
#include <linux/rcupdate.h>
#include <linux/spinlock.h>
#include <linux/jiffies.h>
-#include <linux/bootmem.h>
#include <linux/module.h>
#include <linux/cache.h>
#include <linux/slab.h>
@@ -9,6 +8,7 @@
#include <linux/tcp.h>
#include <linux/hash.h>
#include <linux/tcp_metrics.h>
+#include <linux/vmalloc.h>
#include <net/inet_connection_sock.h>
#include <net/net_namespace.h>
@@ -864,7 +864,7 @@
}
a = info->attrs[TCP_METRICS_ATTR_ADDR_IPV6];
if (a) {
- if (nla_len(a) != sizeof(sizeof(struct in6_addr)))
+ if (nla_len(a) != sizeof(struct in6_addr))
return -EINVAL;
addr->family = AF_INET6;
memcpy(addr->addr.a6, nla_data(a), sizeof(addr->addr.a6));
@@ -1034,7 +1034,10 @@
net->ipv4.tcp_metrics_hash_log = order_base_2(slots);
size = sizeof(struct tcpm_hash_bucket) << net->ipv4.tcp_metrics_hash_log;
- net->ipv4.tcp_metrics_hash = kzalloc(size, GFP_KERNEL);
+ net->ipv4.tcp_metrics_hash = kzalloc(size, GFP_KERNEL | __GFP_NOWARN);
+ if (!net->ipv4.tcp_metrics_hash)
+ net->ipv4.tcp_metrics_hash = vzalloc(size);
+
if (!net->ipv4.tcp_metrics_hash)
return -ENOMEM;
@@ -1055,7 +1058,10 @@
tm = next;
}
}
- kfree(net->ipv4.tcp_metrics_hash);
+ if (is_vmalloc_addr(net->ipv4.tcp_metrics_hash))
+ vfree(net->ipv4.tcp_metrics_hash);
+ else
+ kfree(net->ipv4.tcp_metrics_hash);
}
static __net_initdata struct pernet_operations tcp_net_metrics_ops = {
diff --git a/net/ipv4/tcp_minisocks.c b/net/ipv4/tcp_minisocks.c
index 27536ba..a7302d9 100644
--- a/net/ipv4/tcp_minisocks.c
+++ b/net/ipv4/tcp_minisocks.c
@@ -510,6 +510,7 @@
newtp->rx_opt.mss_clamp = req->mss;
TCP_ECN_openreq_child(newtp, req);
newtp->fastopen_rsk = NULL;
+ newtp->syn_data_acked = 0;
TCP_INC_STATS_BH(sock_net(sk), TCP_MIB_PASSIVEOPENS);
}
diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c
index cfe6ffe..2798706 100644
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -1986,6 +1986,9 @@
tso_segs = tcp_init_tso_segs(sk, skb, mss_now);
BUG_ON(!tso_segs);
+ if (unlikely(tp->repair) && tp->repair_queue == TCP_SEND_QUEUE)
+ goto repair; /* Skip network transmission */
+
cwnd_quota = tcp_cwnd_test(tp, skb);
if (!cwnd_quota)
break;
@@ -2026,6 +2029,7 @@
if (unlikely(tcp_transmit_skb(sk, skb, 1, gfp)))
break;
+repair:
/* Advance the send_head. This one is sent out.
* This call will increment packets_out.
*/
diff --git a/net/ipv4/tcp_timer.c b/net/ipv4/tcp_timer.c
index fc04711..d47c1b4 100644
--- a/net/ipv4/tcp_timer.c
+++ b/net/ipv4/tcp_timer.c
@@ -347,8 +347,8 @@
return;
}
if (tp->fastopen_rsk) {
- BUG_ON(sk->sk_state != TCP_SYN_RECV &&
- sk->sk_state != TCP_FIN_WAIT1);
+ WARN_ON_ONCE(sk->sk_state != TCP_SYN_RECV &&
+ sk->sk_state != TCP_FIN_WAIT1);
tcp_fastopen_synack_timer(sk);
/* Before we receive ACK to our SYN-ACK don't retransmit
* anything else (e.g., data or FIN segments).
diff --git a/net/ipv4/xfrm4_policy.c b/net/ipv4/xfrm4_policy.c
index 05c5ab8..3be0ac2 100644
--- a/net/ipv4/xfrm4_policy.c
+++ b/net/ipv4/xfrm4_policy.c
@@ -279,19 +279,8 @@
xfrm_policy_unregister_afinfo(&xfrm4_policy_afinfo);
}
-void __init xfrm4_init(int rt_max_size)
+void __init xfrm4_init(void)
{
- /*
- * Select a default value for the gc_thresh based on the main route
- * table hash size. It seems to me the worst case scenario is when
- * we have ipsec operating in transport mode, in which we create a
- * dst_entry per socket. The xfrm gc algorithm starts trying to remove
- * entries at gc_thresh, and prevents new allocations as 2*gc_thresh
- * so lets set an initial xfrm gc_thresh value at the rt_max_size/2.
- * That will let us store an ipsec connection per route table entry,
- * and start cleaning when were 1/2 full
- */
- xfrm4_dst_ops.gc_thresh = rt_max_size/2;
dst_entries_init(&xfrm4_dst_ops);
xfrm4_state_init();
diff --git a/net/ipv6/inet6_connection_sock.c b/net/ipv6/inet6_connection_sock.c
index c4f9341..3064785 100644
--- a/net/ipv6/inet6_connection_sock.c
+++ b/net/ipv6/inet6_connection_sock.c
@@ -252,6 +252,7 @@
return NULL;
dst->ops->update_pmtu(dst, sk, NULL, mtu);
- return inet6_csk_route_socket(sk, &fl6);
+ dst = inet6_csk_route_socket(sk, &fl6);
+ return IS_ERR(dst) ? NULL : dst;
}
EXPORT_SYMBOL_GPL(inet6_csk_update_pmtu);
diff --git a/net/ipv6/ip6_gre.c b/net/ipv6/ip6_gre.c
index 0185679..d5cb3c4 100644
--- a/net/ipv6/ip6_gre.c
+++ b/net/ipv6/ip6_gre.c
@@ -1633,9 +1633,9 @@
/* IFLA_GRE_OKEY */
nla_total_size(4) +
/* IFLA_GRE_LOCAL */
- nla_total_size(4) +
+ nla_total_size(sizeof(struct in6_addr)) +
/* IFLA_GRE_REMOTE */
- nla_total_size(4) +
+ nla_total_size(sizeof(struct in6_addr)) +
/* IFLA_GRE_TTL */
nla_total_size(1) +
/* IFLA_GRE_TOS */
@@ -1659,8 +1659,8 @@
nla_put_be16(skb, IFLA_GRE_OFLAGS, p->o_flags) ||
nla_put_be32(skb, IFLA_GRE_IKEY, p->i_key) ||
nla_put_be32(skb, IFLA_GRE_OKEY, p->o_key) ||
- nla_put(skb, IFLA_GRE_LOCAL, sizeof(struct in6_addr), &p->raddr) ||
- nla_put(skb, IFLA_GRE_REMOTE, sizeof(struct in6_addr), &p->laddr) ||
+ nla_put(skb, IFLA_GRE_LOCAL, sizeof(struct in6_addr), &p->laddr) ||
+ nla_put(skb, IFLA_GRE_REMOTE, sizeof(struct in6_addr), &p->raddr) ||
nla_put_u8(skb, IFLA_GRE_TTL, p->hop_limit) ||
/*nla_put_u8(skb, IFLA_GRE_TOS, t->priority) ||*/
nla_put_u8(skb, IFLA_GRE_ENCAP_LIMIT, p->encap_limit) ||
diff --git a/net/ipv6/ipv6_sockglue.c b/net/ipv6/ipv6_sockglue.c
index ba6d13d..e02faed 100644
--- a/net/ipv6/ipv6_sockglue.c
+++ b/net/ipv6/ipv6_sockglue.c
@@ -827,6 +827,7 @@
if (val < 0 || val > 255)
goto e_inval;
np->min_hopcount = val;
+ retv = 0;
break;
case IPV6_DONTFRAG:
np->dontfrag = valbool;
diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c
index ff36194..2edce30 100644
--- a/net/ipv6/ndisc.c
+++ b/net/ipv6/ndisc.c
@@ -535,7 +535,7 @@
{
struct inet6_dev *idev;
struct inet6_ifaddr *ifa;
- struct in6_addr mcaddr;
+ struct in6_addr mcaddr = IN6ADDR_LINKLOCAL_ALLNODES_INIT;
idev = in6_dev_get(dev);
if (!idev)
@@ -543,7 +543,6 @@
read_lock_bh(&idev->lock);
list_for_each_entry(ifa, &idev->addr_list, if_list) {
- addrconf_addr_solict_mult(&ifa->addr, &mcaddr);
ndisc_send_na(dev, NULL, &mcaddr, &ifa->addr,
/*router=*/ !!idev->cnf.forwarding,
/*solicited=*/ false, /*override=*/ true,
diff --git a/net/ipv6/netfilter/ip6table_nat.c b/net/ipv6/netfilter/ip6table_nat.c
index e418bd6..d57dab17 100644
--- a/net/ipv6/netfilter/ip6table_nat.c
+++ b/net/ipv6/netfilter/ip6table_nat.c
@@ -186,7 +186,8 @@
if (!nf_inet_addr_cmp(&ct->tuplehash[dir].tuple.src.u3,
&ct->tuplehash[!dir].tuple.dst.u3) ||
- (ct->tuplehash[dir].tuple.src.u.all !=
+ (ct->tuplehash[dir].tuple.dst.protonum != IPPROTO_ICMPV6 &&
+ ct->tuplehash[dir].tuple.src.u.all !=
ct->tuplehash[!dir].tuple.dst.u.all))
if (nf_xfrm_me_harder(skb, AF_INET6) < 0)
ret = NF_DROP;
@@ -222,6 +223,7 @@
}
#ifdef CONFIG_XFRM
else if (!(IP6CB(skb)->flags & IP6SKB_XFRM_TRANSFORMED) &&
+ ct->tuplehash[dir].tuple.dst.protonum != IPPROTO_ICMPV6 &&
ct->tuplehash[dir].tuple.dst.u.all !=
ct->tuplehash[!dir].tuple.src.u.all)
if (nf_xfrm_me_harder(skb, AF_INET6))
diff --git a/net/ipv6/netfilter/nf_conntrack_reasm.c b/net/ipv6/netfilter/nf_conntrack_reasm.c
index 18bd9bb..22c8ea9 100644
--- a/net/ipv6/netfilter/nf_conntrack_reasm.c
+++ b/net/ipv6/netfilter/nf_conntrack_reasm.c
@@ -85,7 +85,7 @@
{ }
};
-static int __net_init nf_ct_frag6_sysctl_register(struct net *net)
+static int nf_ct_frag6_sysctl_register(struct net *net)
{
struct ctl_table *table;
struct ctl_table_header *hdr;
@@ -127,7 +127,7 @@
}
#else
-static int __net_init nf_ct_frag6_sysctl_register(struct net *net)
+static int nf_ct_frag6_sysctl_register(struct net *net)
{
return 0;
}
diff --git a/net/ipv6/route.c b/net/ipv6/route.c
index 7c7e963..b1e6cf0 100644
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -219,7 +219,7 @@
};
static const u32 ip6_template_metrics[RTAX_MAX] = {
- [RTAX_HOPLIMIT - 1] = 255,
+ [RTAX_HOPLIMIT - 1] = 0,
};
static const struct rt6_info ip6_null_entry_template = {
@@ -1232,7 +1232,7 @@
rt->rt6i_dst.addr = fl6->daddr;
rt->rt6i_dst.plen = 128;
rt->rt6i_idev = idev;
- dst_metric_set(&rt->dst, RTAX_HOPLIMIT, 255);
+ dst_metric_set(&rt->dst, RTAX_HOPLIMIT, 0);
spin_lock_bh(&icmp6_dst_lock);
rt->dst.next = icmp6_dst_gc_list;
diff --git a/net/l2tp/l2tp_eth.c b/net/l2tp/l2tp_eth.c
index 37b8b8b..76125c5 100644
--- a/net/l2tp/l2tp_eth.c
+++ b/net/l2tp/l2tp_eth.c
@@ -291,6 +291,7 @@
out_del_dev:
free_netdev(dev);
+ spriv->dev = NULL;
out_del_session:
l2tp_session_delete(session);
out:
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 05f3a31..7371f67 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -2594,6 +2594,9 @@
else
local->probe_req_reg--;
+ if (!local->open_count)
+ break;
+
ieee80211_queue_work(&local->hw, &local->reconfig_filter);
break;
default:
diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c
index 5f3620f..c21e33d 100644
--- a/net/mac80211/ibss.c
+++ b/net/mac80211/ibss.c
@@ -1108,7 +1108,7 @@
sdata->u.ibss.state = IEEE80211_IBSS_MLME_SEARCH;
sdata->u.ibss.ibss_join_req = jiffies;
- memcpy(sdata->u.ibss.ssid, params->ssid, IEEE80211_MAX_SSID_LEN);
+ memcpy(sdata->u.ibss.ssid, params->ssid, params->ssid_len);
sdata->u.ibss.ssid_len = params->ssid_len;
mutex_unlock(&sdata->u.ibss.mtx);
@@ -1151,10 +1151,6 @@
mutex_lock(&sdata->u.ibss.mtx);
- sdata->u.ibss.state = IEEE80211_IBSS_MLME_SEARCH;
- memset(sdata->u.ibss.bssid, 0, ETH_ALEN);
- sdata->u.ibss.ssid_len = 0;
-
active_ibss = ieee80211_sta_active_ibss(sdata);
if (!active_ibss && !is_zero_ether_addr(ifibss->bssid)) {
@@ -1175,6 +1171,10 @@
}
}
+ ifibss->state = IEEE80211_IBSS_MLME_SEARCH;
+ memset(ifibss->bssid, 0, ETH_ALEN);
+ ifibss->ssid_len = 0;
+
sta_info_flush(sdata->local, sdata);
spin_lock_bh(&ifibss->incomplete_lock);
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 8c80455..156e583 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -1314,6 +1314,8 @@
struct net_device *dev);
netdev_tx_t ieee80211_subif_start_xmit(struct sk_buff *skb,
struct net_device *dev);
+void ieee80211_purge_tx_queue(struct ieee80211_hw *hw,
+ struct sk_buff_head *skbs);
/* HT */
void ieee80211_apply_htcap_overrides(struct ieee80211_sub_if_data *sdata,
diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index 6f8a73c..7de7717 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -853,7 +853,7 @@
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
if (info->control.vif == &sdata->vif) {
__skb_unlink(skb, &local->pending[i]);
- dev_kfree_skb_irq(skb);
+ ieee80211_free_txskb(&local->hw, skb);
}
}
}
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index c80c44903..f57f597 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -871,8 +871,10 @@
local->hw.wiphy->cipher_suites,
sizeof(u32) * local->hw.wiphy->n_cipher_suites,
GFP_KERNEL);
- if (!suites)
- return -ENOMEM;
+ if (!suites) {
+ result = -ENOMEM;
+ goto fail_wiphy_register;
+ }
for (r = 0; r < local->hw.wiphy->n_cipher_suites; r++) {
u32 suite = local->hw.wiphy->cipher_suites[r];
if (suite == WLAN_CIPHER_SUITE_WEP40 ||
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index e714ed8..1b7eed2 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -3099,22 +3099,32 @@
ht_cfreq, ht_oper->primary_chan,
cbss->channel->band);
ht_oper = NULL;
+ } else {
+ channel_type = NL80211_CHAN_HT20;
}
}
- if (ht_oper) {
- channel_type = NL80211_CHAN_HT20;
+ if (ht_oper && sband->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) {
+ /*
+ * cfg80211 already verified that the channel itself can
+ * be used, but it didn't check that we can do the right
+ * HT type, so do that here as well. If HT40 isn't allowed
+ * on this channel, disable 40 MHz operation.
+ */
- if (sband->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) {
- switch (ht_oper->ht_param &
- IEEE80211_HT_PARAM_CHA_SEC_OFFSET) {
- case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
+ switch (ht_oper->ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET) {
+ case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
+ if (cbss->channel->flags & IEEE80211_CHAN_NO_HT40PLUS)
+ ifmgd->flags |= IEEE80211_STA_DISABLE_40MHZ;
+ else
channel_type = NL80211_CHAN_HT40PLUS;
- break;
- case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
+ break;
+ case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
+ if (cbss->channel->flags & IEEE80211_CHAN_NO_HT40MINUS)
+ ifmgd->flags |= IEEE80211_STA_DISABLE_40MHZ;
+ else
channel_type = NL80211_CHAN_HT40MINUS;
- break;
- }
+ break;
}
}
@@ -3549,6 +3559,7 @@
{
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
+ bool tx = !req->local_state_change;
mutex_lock(&ifmgd->mtx);
@@ -3565,12 +3576,12 @@
if (ifmgd->associated &&
ether_addr_equal(ifmgd->associated->bssid, req->bssid)) {
ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
- req->reason_code, true, frame_buf);
+ req->reason_code, tx, frame_buf);
} else {
drv_mgd_prepare_tx(sdata->local, sdata);
ieee80211_send_deauth_disassoc(sdata, req->bssid,
IEEE80211_STYPE_DEAUTH,
- req->reason_code, true,
+ req->reason_code, tx,
frame_buf);
}
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 61c621e..00ade7f 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -531,6 +531,11 @@
if (ieee80211_is_action(hdr->frame_control)) {
u8 category;
+
+ /* make sure category field is present */
+ if (rx->skb->len < IEEE80211_MIN_ACTION_SIZE)
+ return RX_DROP_MONITOR;
+
mgmt = (struct ieee80211_mgmt *)hdr;
category = mgmt->u.action.category;
if (category != WLAN_CATEGORY_MESH_ACTION &&
@@ -883,14 +888,16 @@
*/
if (rx->sta && rx->sdata->vif.type == NL80211_IFTYPE_STATION &&
ieee80211_is_data_present(hdr->frame_control)) {
- u16 ethertype;
- u8 *payload;
+ unsigned int hdrlen;
+ __be16 ethertype;
- payload = rx->skb->data +
- ieee80211_hdrlen(hdr->frame_control);
- ethertype = (payload[6] << 8) | payload[7];
- if (cpu_to_be16(ethertype) ==
- rx->sdata->control_port_protocol)
+ hdrlen = ieee80211_hdrlen(hdr->frame_control);
+
+ if (rx->skb->len < hdrlen + 8)
+ return RX_DROP_MONITOR;
+
+ skb_copy_bits(rx->skb, hdrlen + 6, ðertype, 2);
+ if (ethertype == rx->sdata->control_port_protocol)
return RX_CONTINUE;
}
@@ -1462,11 +1469,14 @@
hdr = (struct ieee80211_hdr *)rx->skb->data;
fc = hdr->frame_control;
+
+ if (ieee80211_is_ctl(fc))
+ return RX_CONTINUE;
+
sc = le16_to_cpu(hdr->seq_ctrl);
frag = sc & IEEE80211_SCTL_FRAG;
if (likely((!ieee80211_has_morefrags(fc) && frag == 0) ||
- (rx->skb)->len < 24 ||
is_multicast_ether_addr(hdr->addr1))) {
/* not fragmented */
goto out;
@@ -1889,6 +1899,20 @@
hdr = (struct ieee80211_hdr *) skb->data;
hdrlen = ieee80211_hdrlen(hdr->frame_control);
+
+ /* make sure fixed part of mesh header is there, also checks skb len */
+ if (!pskb_may_pull(rx->skb, hdrlen + 6))
+ return RX_DROP_MONITOR;
+
+ mesh_hdr = (struct ieee80211s_hdr *) (skb->data + hdrlen);
+
+ /* make sure full mesh header is there, also checks skb len */
+ if (!pskb_may_pull(rx->skb,
+ hdrlen + ieee80211_get_mesh_hdrlen(mesh_hdr)))
+ return RX_DROP_MONITOR;
+
+ /* reload pointers */
+ hdr = (struct ieee80211_hdr *) skb->data;
mesh_hdr = (struct ieee80211s_hdr *) (skb->data + hdrlen);
/* frame is in RMC, don't forward */
@@ -1897,7 +1921,8 @@
mesh_rmc_check(hdr->addr3, mesh_hdr, rx->sdata))
return RX_DROP_MONITOR;
- if (!ieee80211_is_data(hdr->frame_control))
+ if (!ieee80211_is_data(hdr->frame_control) ||
+ !(status->rx_flags & IEEE80211_RX_RA_MATCH))
return RX_CONTINUE;
if (!mesh_hdr->ttl)
@@ -1911,9 +1936,12 @@
if (is_multicast_ether_addr(hdr->addr1)) {
mpp_addr = hdr->addr3;
proxied_addr = mesh_hdr->eaddr1;
- } else {
+ } else if (mesh_hdr->flags & MESH_FLAGS_AE_A5_A6) {
+ /* has_a4 already checked in ieee80211_rx_mesh_check */
mpp_addr = hdr->addr4;
proxied_addr = mesh_hdr->eaddr2;
+ } else {
+ return RX_DROP_MONITOR;
}
rcu_read_lock();
@@ -1941,12 +1969,9 @@
}
skb_set_queue_mapping(skb, q);
- if (!(status->rx_flags & IEEE80211_RX_RA_MATCH))
- goto out;
-
if (!--mesh_hdr->ttl) {
IEEE80211_IFSTA_MESH_CTR_INC(ifmsh, dropped_frames_ttl);
- return RX_DROP_MONITOR;
+ goto out;
}
if (!ifmsh->mshcfg.dot11MeshForwarding)
@@ -2353,6 +2378,10 @@
}
break;
case WLAN_CATEGORY_SELF_PROTECTED:
+ if (len < (IEEE80211_MIN_ACTION_SIZE +
+ sizeof(mgmt->u.action.u.self_prot.action_code)))
+ break;
+
switch (mgmt->u.action.u.self_prot.action_code) {
case WLAN_SP_MESH_PEERING_OPEN:
case WLAN_SP_MESH_PEERING_CLOSE:
@@ -2371,6 +2400,10 @@
}
break;
case WLAN_CATEGORY_MESH_ACTION:
+ if (len < (IEEE80211_MIN_ACTION_SIZE +
+ sizeof(mgmt->u.action.u.mesh_action.action_code)))
+ break;
+
if (!ieee80211_vif_is_mesh(&sdata->vif))
break;
if (mesh_action_is_path_sel(mgmt) &&
@@ -2913,10 +2946,15 @@
if (ieee80211_is_data(fc) || ieee80211_is_mgmt(fc))
local->dot11ReceivedFragmentCount++;
- if (ieee80211_is_mgmt(fc))
- err = skb_linearize(skb);
- else
+ if (ieee80211_is_mgmt(fc)) {
+ /* drop frame if too short for header */
+ if (skb->len < ieee80211_hdrlen(fc))
+ err = -ENOBUFS;
+ else
+ err = skb_linearize(skb);
+ } else {
err = !pskb_may_pull(skb, ieee80211_hdrlen(fc));
+ }
if (err) {
dev_kfree_skb(skb);
diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c
index c4cdbde..43e60b5 100644
--- a/net/mac80211/scan.c
+++ b/net/mac80211/scan.c
@@ -917,7 +917,7 @@
struct cfg80211_sched_scan_request *req)
{
struct ieee80211_local *local = sdata->local;
- struct ieee80211_sched_scan_ies sched_scan_ies;
+ struct ieee80211_sched_scan_ies sched_scan_ies = {};
int ret, i;
mutex_lock(&local->mtx);
diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c
index 797dd36a..d2eb64e 100644
--- a/net/mac80211/sta_info.c
+++ b/net/mac80211/sta_info.c
@@ -117,8 +117,8 @@
for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) {
local->total_ps_buffered -= skb_queue_len(&sta->ps_tx_buf[ac]);
- __skb_queue_purge(&sta->ps_tx_buf[ac]);
- __skb_queue_purge(&sta->tx_filtered[ac]);
+ ieee80211_purge_tx_queue(&local->hw, &sta->ps_tx_buf[ac]);
+ ieee80211_purge_tx_queue(&local->hw, &sta->tx_filtered[ac]);
}
#ifdef CONFIG_MAC80211_MESH
@@ -141,7 +141,7 @@
tid_tx = rcu_dereference_raw(sta->ampdu_mlme.tid_tx[i]);
if (!tid_tx)
continue;
- __skb_queue_purge(&tid_tx->pending);
+ ieee80211_purge_tx_queue(&local->hw, &tid_tx->pending);
kfree(tid_tx);
}
@@ -650,7 +650,7 @@
*/
if (!skb)
break;
- dev_kfree_skb(skb);
+ ieee80211_free_txskb(&local->hw, skb);
}
/*
@@ -679,7 +679,7 @@
local->total_ps_buffered--;
ps_dbg(sta->sdata, "Buffered frame expired (STA %pM)\n",
sta->sta.addr);
- dev_kfree_skb(skb);
+ ieee80211_free_txskb(&local->hw, skb);
}
/*
@@ -961,6 +961,7 @@
struct ieee80211_local *local = sdata->local;
struct sk_buff_head pending;
int filtered = 0, buffered = 0, ac;
+ unsigned long flags;
clear_sta_flag(sta, WLAN_STA_SP);
@@ -976,12 +977,16 @@
for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) {
int count = skb_queue_len(&pending), tmp;
+ spin_lock_irqsave(&sta->tx_filtered[ac].lock, flags);
skb_queue_splice_tail_init(&sta->tx_filtered[ac], &pending);
+ spin_unlock_irqrestore(&sta->tx_filtered[ac].lock, flags);
tmp = skb_queue_len(&pending);
filtered += tmp - count;
count = tmp;
+ spin_lock_irqsave(&sta->ps_tx_buf[ac].lock, flags);
skb_queue_splice_tail_init(&sta->ps_tx_buf[ac], &pending);
+ spin_unlock_irqrestore(&sta->ps_tx_buf[ac].lock, flags);
tmp = skb_queue_len(&pending);
buffered += tmp - count;
}
diff --git a/net/mac80211/status.c b/net/mac80211/status.c
index 3af0cc4..101eb88 100644
--- a/net/mac80211/status.c
+++ b/net/mac80211/status.c
@@ -668,3 +668,12 @@
dev_kfree_skb_any(skb);
}
EXPORT_SYMBOL(ieee80211_free_txskb);
+
+void ieee80211_purge_tx_queue(struct ieee80211_hw *hw,
+ struct sk_buff_head *skbs)
+{
+ struct sk_buff *skb;
+
+ while ((skb = __skb_dequeue(skbs)))
+ ieee80211_free_txskb(hw, skb);
+}
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index c9bf83f..b858ebe 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -1358,7 +1358,7 @@
if (tx->skb)
ieee80211_free_txskb(&tx->local->hw, tx->skb);
else
- __skb_queue_purge(&tx->skbs);
+ ieee80211_purge_tx_queue(&tx->local->hw, &tx->skbs);
return -1;
} else if (unlikely(res == TX_QUEUED)) {
I802_DEBUG_INC(tx->local->tx_handlers_queued);
@@ -2120,10 +2120,13 @@
*/
void ieee80211_clear_tx_pending(struct ieee80211_local *local)
{
+ struct sk_buff *skb;
int i;
- for (i = 0; i < local->hw.queues; i++)
- skb_queue_purge(&local->pending[i]);
+ for (i = 0; i < local->hw.queues; i++) {
+ while ((skb = skb_dequeue(&local->pending[i])) != NULL)
+ ieee80211_free_txskb(&local->hw, skb);
+ }
}
/*
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index 22ca350..0151ae3 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -406,7 +406,7 @@
int queue = info->hw_queue;
if (WARN_ON(!info->control.vif)) {
- kfree_skb(skb);
+ ieee80211_free_txskb(&local->hw, skb);
return;
}
@@ -431,7 +431,7 @@
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
if (WARN_ON(!info->control.vif)) {
- kfree_skb(skb);
+ ieee80211_free_txskb(&local->hw, skb);
continue;
}
@@ -643,13 +643,41 @@
break;
}
- if (id != WLAN_EID_VENDOR_SPECIFIC &&
- id != WLAN_EID_QUIET &&
- test_bit(id, seen_elems)) {
- elems->parse_error = true;
- left -= elen;
- pos += elen;
- continue;
+ switch (id) {
+ case WLAN_EID_SSID:
+ case WLAN_EID_SUPP_RATES:
+ case WLAN_EID_FH_PARAMS:
+ case WLAN_EID_DS_PARAMS:
+ case WLAN_EID_CF_PARAMS:
+ case WLAN_EID_TIM:
+ case WLAN_EID_IBSS_PARAMS:
+ case WLAN_EID_CHALLENGE:
+ case WLAN_EID_RSN:
+ case WLAN_EID_ERP_INFO:
+ case WLAN_EID_EXT_SUPP_RATES:
+ case WLAN_EID_HT_CAPABILITY:
+ case WLAN_EID_HT_OPERATION:
+ case WLAN_EID_VHT_CAPABILITY:
+ case WLAN_EID_VHT_OPERATION:
+ case WLAN_EID_MESH_ID:
+ case WLAN_EID_MESH_CONFIG:
+ case WLAN_EID_PEER_MGMT:
+ case WLAN_EID_PREQ:
+ case WLAN_EID_PREP:
+ case WLAN_EID_PERR:
+ case WLAN_EID_RANN:
+ case WLAN_EID_CHANNEL_SWITCH:
+ case WLAN_EID_EXT_CHANSWITCH_ANN:
+ case WLAN_EID_COUNTRY:
+ case WLAN_EID_PWR_CONSTRAINT:
+ case WLAN_EID_TIMEOUT_INTERVAL:
+ if (test_bit(id, seen_elems)) {
+ elems->parse_error = true;
+ left -= elen;
+ pos += elen;
+ continue;
+ }
+ break;
}
if (calc_crc && id < 64 && (filter & (1ULL << id)))
@@ -1463,6 +1491,8 @@
list_for_each_entry(sdata, &local->interfaces, list) {
if (sdata->vif.type != NL80211_IFTYPE_STATION)
continue;
+ if (!sdata->u.mgd.associated)
+ continue;
ieee80211_send_nullfunc(local, sdata, 0);
}
diff --git a/net/mac80211/wpa.c b/net/mac80211/wpa.c
index bdb53ab..8bd2f5c 100644
--- a/net/mac80211/wpa.c
+++ b/net/mac80211/wpa.c
@@ -106,7 +106,8 @@
if (status->flag & RX_FLAG_MMIC_ERROR)
goto mic_fail;
- if (!(status->flag & RX_FLAG_IV_STRIPPED) && rx->key)
+ if (!(status->flag & RX_FLAG_IV_STRIPPED) && rx->key &&
+ rx->key->conf.cipher == WLAN_CIPHER_SUITE_TKIP)
goto update_iv;
return RX_CONTINUE;
@@ -545,14 +546,19 @@
static void bip_aad(struct sk_buff *skb, u8 *aad)
{
+ __le16 mask_fc;
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
+
/* BIP AAD: FC(masked) || A1 || A2 || A3 */
/* FC type/subtype */
- aad[0] = skb->data[0];
/* Mask FC Retry, PwrMgt, MoreData flags to zero */
- aad[1] = skb->data[1] & ~(BIT(4) | BIT(5) | BIT(6));
+ mask_fc = hdr->frame_control;
+ mask_fc &= ~cpu_to_le16(IEEE80211_FCTL_RETRY | IEEE80211_FCTL_PM |
+ IEEE80211_FCTL_MOREDATA);
+ put_unaligned(mask_fc, (__le16 *) &aad[0]);
/* A1 || A2 || A3 */
- memcpy(aad + 2, skb->data + 4, 3 * ETH_ALEN);
+ memcpy(aad + 2, &hdr->addr1, 3 * ETH_ALEN);
}
diff --git a/net/netfilter/ipset/ip_set_hash_ip.c b/net/netfilter/ipset/ip_set_hash_ip.c
index ec3dba5..5c0b785 100644
--- a/net/netfilter/ipset/ip_set_hash_ip.c
+++ b/net/netfilter/ipset/ip_set_hash_ip.c
@@ -173,6 +173,7 @@
return adtfn(set, &nip, timeout, flags);
}
+ ip_to = ip;
if (tb[IPSET_ATTR_IP_TO]) {
ret = ip_set_get_hostipaddr4(tb[IPSET_ATTR_IP_TO], &ip_to);
if (ret)
@@ -185,8 +186,7 @@
if (!cidr || cidr > 32)
return -IPSET_ERR_INVALID_CIDR;
ip_set_mask_from_to(ip, ip_to, cidr);
- } else
- ip_to = ip;
+ }
hosts = h->netmask == 32 ? 1 : 2 << (32 - h->netmask - 1);
diff --git a/net/netfilter/ipset/ip_set_hash_ipport.c b/net/netfilter/ipset/ip_set_hash_ipport.c
index 0171f75..6283351 100644
--- a/net/netfilter/ipset/ip_set_hash_ipport.c
+++ b/net/netfilter/ipset/ip_set_hash_ipport.c
@@ -162,7 +162,7 @@
const struct ip_set_hash *h = set->data;
ipset_adtfn adtfn = set->variant->adt[adt];
struct hash_ipport4_elem data = { };
- u32 ip, ip_to = 0, p = 0, port, port_to;
+ u32 ip, ip_to, p = 0, port, port_to;
u32 timeout = h->timeout;
bool with_ports = false;
int ret;
@@ -210,7 +210,7 @@
return ip_set_eexist(ret, flags) ? 0 : ret;
}
- ip = ntohl(data.ip);
+ ip_to = ip = ntohl(data.ip);
if (tb[IPSET_ATTR_IP_TO]) {
ret = ip_set_get_hostipaddr4(tb[IPSET_ATTR_IP_TO], &ip_to);
if (ret)
@@ -223,8 +223,7 @@
if (!cidr || cidr > 32)
return -IPSET_ERR_INVALID_CIDR;
ip_set_mask_from_to(ip, ip_to, cidr);
- } else
- ip_to = ip;
+ }
port_to = port = ntohs(data.port);
if (with_ports && tb[IPSET_ATTR_PORT_TO]) {
diff --git a/net/netfilter/ipset/ip_set_hash_ipportip.c b/net/netfilter/ipset/ip_set_hash_ipportip.c
index 6344ef5..6a21271 100644
--- a/net/netfilter/ipset/ip_set_hash_ipportip.c
+++ b/net/netfilter/ipset/ip_set_hash_ipportip.c
@@ -166,7 +166,7 @@
const struct ip_set_hash *h = set->data;
ipset_adtfn adtfn = set->variant->adt[adt];
struct hash_ipportip4_elem data = { };
- u32 ip, ip_to = 0, p = 0, port, port_to;
+ u32 ip, ip_to, p = 0, port, port_to;
u32 timeout = h->timeout;
bool with_ports = false;
int ret;
@@ -218,7 +218,7 @@
return ip_set_eexist(ret, flags) ? 0 : ret;
}
- ip = ntohl(data.ip);
+ ip_to = ip = ntohl(data.ip);
if (tb[IPSET_ATTR_IP_TO]) {
ret = ip_set_get_hostipaddr4(tb[IPSET_ATTR_IP_TO], &ip_to);
if (ret)
@@ -231,8 +231,7 @@
if (!cidr || cidr > 32)
return -IPSET_ERR_INVALID_CIDR;
ip_set_mask_from_to(ip, ip_to, cidr);
- } else
- ip_to = ip;
+ }
port_to = port = ntohs(data.port);
if (with_ports && tb[IPSET_ATTR_PORT_TO]) {
diff --git a/net/netfilter/ipset/ip_set_hash_ipportnet.c b/net/netfilter/ipset/ip_set_hash_ipportnet.c
index cb71f9a..2d5cd4e 100644
--- a/net/netfilter/ipset/ip_set_hash_ipportnet.c
+++ b/net/netfilter/ipset/ip_set_hash_ipportnet.c
@@ -215,8 +215,8 @@
const struct ip_set_hash *h = set->data;
ipset_adtfn adtfn = set->variant->adt[adt];
struct hash_ipportnet4_elem data = { .cidr = HOST_MASK - 1 };
- u32 ip, ip_to = 0, p = 0, port, port_to;
- u32 ip2_from = 0, ip2_to, ip2_last, ip2;
+ u32 ip, ip_to, p = 0, port, port_to;
+ u32 ip2_from, ip2_to, ip2_last, ip2;
u32 timeout = h->timeout;
bool with_ports = false;
u8 cidr;
@@ -286,6 +286,7 @@
return ip_set_eexist(ret, flags) ? 0 : ret;
}
+ ip_to = ip;
if (tb[IPSET_ATTR_IP_TO]) {
ret = ip_set_get_hostipaddr4(tb[IPSET_ATTR_IP_TO], &ip_to);
if (ret)
@@ -306,6 +307,8 @@
if (port > port_to)
swap(port, port_to);
}
+
+ ip2_to = ip2_from;
if (tb[IPSET_ATTR_IP2_TO]) {
ret = ip_set_get_hostipaddr4(tb[IPSET_ATTR_IP2_TO], &ip2_to);
if (ret)
diff --git a/net/netfilter/ipvs/ip_vs_ctl.c b/net/netfilter/ipvs/ip_vs_ctl.c
index 7e7198b..c4ee437 100644
--- a/net/netfilter/ipvs/ip_vs_ctl.c
+++ b/net/netfilter/ipvs/ip_vs_ctl.c
@@ -2589,6 +2589,8 @@
struct ip_vs_proto_data *pd;
#endif
+ memset(u, 0, sizeof (*u));
+
#ifdef CONFIG_IP_VS_PROTO_TCP
pd = ip_vs_proto_data_get(net, IPPROTO_TCP);
u->tcp_timeout = pd->timeout_table[IP_VS_TCP_S_ESTABLISHED] / HZ;
@@ -2766,7 +2768,6 @@
{
struct ip_vs_timeout_user t;
- memset(&t, 0, sizeof(t));
__ip_vs_get_timeouts(net, &t);
if (copy_to_user(user, &t, sizeof(t)) != 0)
ret = -EFAULT;
diff --git a/net/netfilter/nf_conntrack_h323_main.c b/net/netfilter/nf_conntrack_h323_main.c
index 1b30b0de..962795e 100644
--- a/net/netfilter/nf_conntrack_h323_main.c
+++ b/net/netfilter/nf_conntrack_h323_main.c
@@ -753,7 +753,8 @@
flowi4_to_flowi(&fl1), false)) {
if (!afinfo->route(&init_net, (struct dst_entry **)&rt2,
flowi4_to_flowi(&fl2), false)) {
- if (rt1->rt_gateway == rt2->rt_gateway &&
+ if (rt_nexthop(rt1, fl1.daddr) ==
+ rt_nexthop(rt2, fl2.daddr) &&
rt1->dst.dev == rt2->dst.dev)
ret = 1;
dst_release(&rt2->dst);
diff --git a/net/netfilter/nfnetlink_cttimeout.c b/net/netfilter/nfnetlink_cttimeout.c
index 8847b4d..701c88a 100644
--- a/net/netfilter/nfnetlink_cttimeout.c
+++ b/net/netfilter/nfnetlink_cttimeout.c
@@ -41,7 +41,8 @@
static LIST_HEAD(cttimeout_list);
static const struct nla_policy cttimeout_nla_policy[CTA_TIMEOUT_MAX+1] = {
- [CTA_TIMEOUT_NAME] = { .type = NLA_NUL_STRING },
+ [CTA_TIMEOUT_NAME] = { .type = NLA_NUL_STRING,
+ .len = CTNL_TIMEOUT_NAME_MAX - 1},
[CTA_TIMEOUT_L3PROTO] = { .type = NLA_U16 },
[CTA_TIMEOUT_L4PROTO] = { .type = NLA_U8 },
[CTA_TIMEOUT_DATA] = { .type = NLA_NESTED },
diff --git a/net/netfilter/xt_CT.c b/net/netfilter/xt_CT.c
index 16c7125..ae7f5da 100644
--- a/net/netfilter/xt_CT.c
+++ b/net/netfilter/xt_CT.c
@@ -180,9 +180,9 @@
typeof(nf_ct_timeout_find_get_hook) timeout_find_get;
struct ctnl_timeout *timeout;
struct nf_conn_timeout *timeout_ext;
- const struct ipt_entry *e = par->entryinfo;
struct nf_conntrack_l4proto *l4proto;
int ret = 0;
+ u8 proto;
rcu_read_lock();
timeout_find_get = rcu_dereference(nf_ct_timeout_find_get_hook);
@@ -192,9 +192,11 @@
goto out;
}
- if (e->ip.invflags & IPT_INV_PROTO) {
+ proto = xt_ct_find_proto(par);
+ if (!proto) {
ret = -EINVAL;
- pr_info("You cannot use inversion on L4 protocol\n");
+ pr_info("You must specify a L4 protocol, and not use "
+ "inversions on it.\n");
goto out;
}
@@ -214,7 +216,7 @@
/* Make sure the timeout policy matches any existing protocol tracker,
* otherwise default to generic.
*/
- l4proto = __nf_ct_l4proto_find(par->family, e->ip.proto);
+ l4proto = __nf_ct_l4proto_find(par->family, proto);
if (timeout->l4proto->l4proto != l4proto->l4proto) {
ret = -EINVAL;
pr_info("Timeout policy `%s' can only be used by L4 protocol "
diff --git a/net/netfilter/xt_TEE.c b/net/netfilter/xt_TEE.c
index ee2e5bc..bd93e51 100644
--- a/net/netfilter/xt_TEE.c
+++ b/net/netfilter/xt_TEE.c
@@ -70,6 +70,7 @@
fl4.daddr = info->gw.ip;
fl4.flowi4_tos = RT_TOS(iph->tos);
fl4.flowi4_scope = RT_SCOPE_UNIVERSE;
+ fl4.flowi4_flags = FLOWI_FLAG_KNOWN_NH;
rt = ip_route_output_key(net, &fl4);
if (IS_ERR(rt))
return false;
diff --git a/net/netfilter/xt_nat.c b/net/netfilter/xt_nat.c
index 81aafa8..bea7464c 100644
--- a/net/netfilter/xt_nat.c
+++ b/net/netfilter/xt_nat.c
@@ -111,7 +111,7 @@
.family = NFPROTO_IPV4,
.table = "nat",
.hooks = (1 << NF_INET_POST_ROUTING) |
- (1 << NF_INET_LOCAL_OUT),
+ (1 << NF_INET_LOCAL_IN),
.me = THIS_MODULE,
},
{
@@ -123,7 +123,7 @@
.family = NFPROTO_IPV4,
.table = "nat",
.hooks = (1 << NF_INET_PRE_ROUTING) |
- (1 << NF_INET_LOCAL_IN),
+ (1 << NF_INET_LOCAL_OUT),
.me = THIS_MODULE,
},
{
@@ -133,7 +133,7 @@
.targetsize = sizeof(struct nf_nat_range),
.table = "nat",
.hooks = (1 << NF_INET_POST_ROUTING) |
- (1 << NF_INET_LOCAL_OUT),
+ (1 << NF_INET_LOCAL_IN),
.me = THIS_MODULE,
},
{
@@ -143,7 +143,7 @@
.targetsize = sizeof(struct nf_nat_range),
.table = "nat",
.hooks = (1 << NF_INET_PRE_ROUTING) |
- (1 << NF_INET_LOCAL_IN),
+ (1 << NF_INET_LOCAL_OUT),
.me = THIS_MODULE,
},
};
diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c
index 01e944a..4da797f 100644
--- a/net/netlink/af_netlink.c
+++ b/net/netlink/af_netlink.c
@@ -138,6 +138,8 @@
static DEFINE_RWLOCK(nl_table_lock);
static atomic_t nl_table_users = ATOMIC_INIT(0);
+#define nl_deref_protected(X) rcu_dereference_protected(X, lockdep_is_held(&nl_table_lock));
+
static ATOMIC_NOTIFIER_HEAD(netlink_chain);
static inline u32 netlink_group_mask(u32 group)
@@ -345,6 +347,11 @@
struct hlist_node *node;
unsigned long mask;
unsigned int i;
+ struct listeners *listeners;
+
+ listeners = nl_deref_protected(tbl->listeners);
+ if (!listeners)
+ return;
for (i = 0; i < NLGRPLONGS(tbl->groups); i++) {
mask = 0;
@@ -352,7 +359,7 @@
if (i < NLGRPLONGS(nlk_sk(sk)->ngroups))
mask |= nlk_sk(sk)->groups[i];
}
- tbl->listeners->masks[i] = mask;
+ listeners->masks[i] = mask;
}
/* this function is only called with the netlink table "grabbed", which
* makes sure updates are visible before bind or setsockopt return. */
@@ -536,7 +543,11 @@
if (netlink_is_kernel(sk)) {
BUG_ON(nl_table[sk->sk_protocol].registered == 0);
if (--nl_table[sk->sk_protocol].registered == 0) {
- kfree(nl_table[sk->sk_protocol].listeners);
+ struct listeners *old;
+
+ old = nl_deref_protected(nl_table[sk->sk_protocol].listeners);
+ RCU_INIT_POINTER(nl_table[sk->sk_protocol].listeners, NULL);
+ kfree_rcu(old, rcu);
nl_table[sk->sk_protocol].module = NULL;
nl_table[sk->sk_protocol].bind = NULL;
nl_table[sk->sk_protocol].flags = 0;
@@ -982,7 +993,7 @@
rcu_read_lock();
listeners = rcu_dereference(nl_table[sk->sk_protocol].listeners);
- if (group - 1 < nl_table[sk->sk_protocol].groups)
+ if (listeners && group - 1 < nl_table[sk->sk_protocol].groups)
res = test_bit(group - 1, listeners->masks);
rcu_read_unlock();
@@ -1625,7 +1636,7 @@
new = kzalloc(sizeof(*new) + NLGRPSZ(groups), GFP_ATOMIC);
if (!new)
return -ENOMEM;
- old = rcu_dereference_protected(tbl->listeners, 1);
+ old = nl_deref_protected(tbl->listeners);
memcpy(new->masks, old->masks, NLGRPSZ(tbl->groups));
rcu_assign_pointer(tbl->listeners, new);
diff --git a/net/nfc/llcp/llcp.c b/net/nfc/llcp/llcp.c
index cc10d07..9e8f4b2 100644
--- a/net/nfc/llcp/llcp.c
+++ b/net/nfc/llcp/llcp.c
@@ -1210,7 +1210,7 @@
local->remote_miu = LLCP_DEFAULT_MIU;
local->remote_lto = LLCP_DEFAULT_LTO;
- list_add(&llcp_devices, &local->list);
+ list_add(&local->list, &llcp_devices);
return 0;
}
diff --git a/net/sched/sch_qfq.c b/net/sched/sch_qfq.c
index f0dd83c..9687fa1 100644
--- a/net/sched/sch_qfq.c
+++ b/net/sched/sch_qfq.c
@@ -84,18 +84,19 @@
* grp->index is the index of the group; and grp->slot_shift
* is the shift for the corresponding (scaled) sigma_i.
*/
-#define QFQ_MAX_INDEX 19
-#define QFQ_MAX_WSHIFT 16
+#define QFQ_MAX_INDEX 24
+#define QFQ_MAX_WSHIFT 12
#define QFQ_MAX_WEIGHT (1<<QFQ_MAX_WSHIFT)
-#define QFQ_MAX_WSUM (2*QFQ_MAX_WEIGHT)
+#define QFQ_MAX_WSUM (16*QFQ_MAX_WEIGHT)
#define FRAC_BITS 30 /* fixed point arithmetic */
#define ONE_FP (1UL << FRAC_BITS)
#define IWSUM (ONE_FP/QFQ_MAX_WSUM)
-#define QFQ_MTU_SHIFT 11
+#define QFQ_MTU_SHIFT 16 /* to support TSO/GSO */
#define QFQ_MIN_SLOT_SHIFT (FRAC_BITS + QFQ_MTU_SHIFT - QFQ_MAX_INDEX)
+#define QFQ_MIN_LMAX 256 /* min possible lmax for a class */
/*
* Possible group states. These values are used as indexes for the bitmaps
@@ -231,6 +232,32 @@
q->wsum += delta_w;
}
+static void qfq_update_reactivate_class(struct qfq_sched *q,
+ struct qfq_class *cl,
+ u32 inv_w, u32 lmax, int delta_w)
+{
+ bool need_reactivation = false;
+ int i = qfq_calc_index(inv_w, lmax);
+
+ if (&q->groups[i] != cl->grp && cl->qdisc->q.qlen > 0) {
+ /*
+ * shift cl->F back, to not charge the
+ * class for the not-yet-served head
+ * packet
+ */
+ cl->F = cl->S;
+ /* remove class from its slot in the old group */
+ qfq_deactivate_class(q, cl);
+ need_reactivation = true;
+ }
+
+ qfq_update_class_params(q, cl, lmax, inv_w, delta_w);
+
+ if (need_reactivation) /* activate in new group */
+ qfq_activate_class(q, cl, qdisc_peek_len(cl->qdisc));
+}
+
+
static int qfq_change_class(struct Qdisc *sch, u32 classid, u32 parentid,
struct nlattr **tca, unsigned long *arg)
{
@@ -238,7 +265,7 @@
struct qfq_class *cl = (struct qfq_class *)*arg;
struct nlattr *tb[TCA_QFQ_MAX + 1];
u32 weight, lmax, inv_w;
- int i, err;
+ int err;
int delta_w;
if (tca[TCA_OPTIONS] == NULL) {
@@ -270,16 +297,14 @@
if (tb[TCA_QFQ_LMAX]) {
lmax = nla_get_u32(tb[TCA_QFQ_LMAX]);
- if (!lmax || lmax > (1UL << QFQ_MTU_SHIFT)) {
+ if (lmax < QFQ_MIN_LMAX || lmax > (1UL << QFQ_MTU_SHIFT)) {
pr_notice("qfq: invalid max length %u\n", lmax);
return -EINVAL;
}
} else
- lmax = 1UL << QFQ_MTU_SHIFT;
+ lmax = psched_mtu(qdisc_dev(sch));
if (cl != NULL) {
- bool need_reactivation = false;
-
if (tca[TCA_RATE]) {
err = gen_replace_estimator(&cl->bstats, &cl->rate_est,
qdisc_root_sleeping_lock(sch),
@@ -291,24 +316,8 @@
if (lmax == cl->lmax && inv_w == cl->inv_w)
return 0; /* nothing to update */
- i = qfq_calc_index(inv_w, lmax);
sch_tree_lock(sch);
- if (&q->groups[i] != cl->grp && cl->qdisc->q.qlen > 0) {
- /*
- * shift cl->F back, to not charge the
- * class for the not-yet-served head
- * packet
- */
- cl->F = cl->S;
- /* remove class from its slot in the old group */
- qfq_deactivate_class(q, cl);
- need_reactivation = true;
- }
-
- qfq_update_class_params(q, cl, lmax, inv_w, delta_w);
-
- if (need_reactivation) /* activate in new group */
- qfq_activate_class(q, cl, qdisc_peek_len(cl->qdisc));
+ qfq_update_reactivate_class(q, cl, inv_w, lmax, delta_w);
sch_tree_unlock(sch);
return 0;
@@ -663,15 +672,48 @@
/*
- * XXX we should make sure that slot becomes less than 32.
- * This is guaranteed by the input values.
- * roundedS is always cl->S rounded on grp->slot_shift bits.
+ * If the weight and lmax (max_pkt_size) of the classes do not change,
+ * then QFQ guarantees that the slot index is never higher than
+ * 2 + ((1<<QFQ_MTU_SHIFT)/QFQ_MIN_LMAX) * (QFQ_MAX_WEIGHT/QFQ_MAX_WSUM).
+ *
+ * With the current values of the above constants, the index is
+ * then guaranteed to never be higher than 2 + 256 * (1 / 16) = 18.
+ *
+ * When the weight of a class is increased or the lmax of the class is
+ * decreased, a new class with smaller slot size may happen to be
+ * activated. The activation of this class should be properly delayed
+ * to when the service of the class has finished in the ideal system
+ * tracked by QFQ. If the activation of the class is not delayed to
+ * this reference time instant, then this class may be unjustly served
+ * before other classes waiting for service. This may cause
+ * (unfrequently) the above bound to the slot index to be violated for
+ * some of these unlucky classes.
+ *
+ * Instead of delaying the activation of the new class, which is quite
+ * complex, the following inaccurate but simple solution is used: if
+ * the slot index is higher than QFQ_MAX_SLOTS-2, then the timestamps
+ * of the class are shifted backward so as to let the slot index
+ * become equal to QFQ_MAX_SLOTS-2. This threshold is used because, if
+ * the slot index is above it, then the data structure implementing
+ * the bucket list either gets immediately corrupted or may get
+ * corrupted on a possible next packet arrival that causes the start
+ * time of the group to be shifted backward.
*/
static void qfq_slot_insert(struct qfq_group *grp, struct qfq_class *cl,
u64 roundedS)
{
u64 slot = (roundedS - grp->S) >> grp->slot_shift;
- unsigned int i = (grp->front + slot) % QFQ_MAX_SLOTS;
+ unsigned int i; /* slot index in the bucket list */
+
+ if (unlikely(slot > QFQ_MAX_SLOTS - 2)) {
+ u64 deltaS = roundedS - grp->S -
+ ((u64)(QFQ_MAX_SLOTS - 2)<<grp->slot_shift);
+ cl->S -= deltaS;
+ cl->F -= deltaS;
+ slot = QFQ_MAX_SLOTS - 2;
+ }
+
+ i = (grp->front + slot) % QFQ_MAX_SLOTS;
hlist_add_head(&cl->next, &grp->slots[i]);
__set_bit(slot, &grp->full_slots);
@@ -892,6 +934,13 @@
}
pr_debug("qfq_enqueue: cl = %x\n", cl->common.classid);
+ if (unlikely(cl->lmax < qdisc_pkt_len(skb))) {
+ pr_debug("qfq: increasing maxpkt from %u to %u for class %u",
+ cl->lmax, qdisc_pkt_len(skb), cl->common.classid);
+ qfq_update_reactivate_class(q, cl, cl->inv_w,
+ qdisc_pkt_len(skb), 0);
+ }
+
err = qdisc_enqueue(skb, cl->qdisc);
if (unlikely(err != NET_XMIT_SUCCESS)) {
pr_debug("qfq_enqueue: enqueue failed %d\n", err);
diff --git a/net/sctp/proc.c b/net/sctp/proc.c
index c3bea26..9966e7b 100644
--- a/net/sctp/proc.c
+++ b/net/sctp/proc.c
@@ -102,7 +102,7 @@
.open = sctp_snmp_seq_open,
.read = seq_read,
.llseek = seq_lseek,
- .release = single_release,
+ .release = single_release_net,
};
/* Set up the proc fs entry for 'snmp' object. */
@@ -251,7 +251,7 @@
.open = sctp_eps_seq_open,
.read = seq_read,
.llseek = seq_lseek,
- .release = seq_release,
+ .release = seq_release_net,
};
/* Set up the proc fs entry for 'eps' object. */
@@ -372,7 +372,7 @@
.open = sctp_assocs_seq_open,
.read = seq_read,
.llseek = seq_lseek,
- .release = seq_release,
+ .release = seq_release_net,
};
/* Set up the proc fs entry for 'assocs' object. */
@@ -517,7 +517,7 @@
.open = sctp_remaddr_seq_open,
.read = seq_read,
.llseek = seq_lseek,
- .release = seq_release,
+ .release = seq_release_net,
};
int __net_init sctp_remaddr_proc_init(struct net *net)
diff --git a/net/sctp/socket.c b/net/sctp/socket.c
index 59d16ea..a60d1f8 100644
--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -974,7 +974,7 @@
void *addr_buf;
struct sctp_af *af;
- SCTP_DEBUG_PRINTK("sctp_setsocktopt_bindx: sk %p addrs %p"
+ SCTP_DEBUG_PRINTK("sctp_setsockopt_bindx: sk %p addrs %p"
" addrs_size %d opt %d\n", sk, addrs, addrs_size, op);
if (unlikely(addrs_size <= 0))
diff --git a/net/sunrpc/backchannel_rqst.c b/net/sunrpc/backchannel_rqst.c
index 5a3d675..a9c0bbc 100644
--- a/net/sunrpc/backchannel_rqst.c
+++ b/net/sunrpc/backchannel_rqst.c
@@ -172,7 +172,7 @@
xprt_free_allocation(req);
dprintk("RPC: setup backchannel transport failed\n");
- return -1;
+ return -ENOMEM;
}
EXPORT_SYMBOL_GPL(xprt_setup_backchannel);
diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c
index aaaadfb..75853ca 100644
--- a/net/sunrpc/xprtsock.c
+++ b/net/sunrpc/xprtsock.c
@@ -254,7 +254,6 @@
void (*old_data_ready)(struct sock *, int);
void (*old_state_change)(struct sock *);
void (*old_write_space)(struct sock *);
- void (*old_error_report)(struct sock *);
};
/*
@@ -737,10 +736,10 @@
dprintk("RPC: sendmsg returned unrecognized error %d\n",
-status);
case -ECONNRESET:
- case -EPIPE:
xs_tcp_shutdown(xprt);
case -ECONNREFUSED:
case -ENOTCONN:
+ case -EPIPE:
clear_bit(SOCK_ASYNC_NOSPACE, &transport->sock->flags);
}
@@ -781,7 +780,6 @@
transport->old_data_ready = sk->sk_data_ready;
transport->old_state_change = sk->sk_state_change;
transport->old_write_space = sk->sk_write_space;
- transport->old_error_report = sk->sk_error_report;
}
static void xs_restore_old_callbacks(struct sock_xprt *transport, struct sock *sk)
@@ -789,7 +787,6 @@
sk->sk_data_ready = transport->old_data_ready;
sk->sk_state_change = transport->old_state_change;
sk->sk_write_space = transport->old_write_space;
- sk->sk_error_report = transport->old_error_report;
}
static void xs_reset_transport(struct sock_xprt *transport)
@@ -1453,7 +1450,7 @@
xprt_clear_connecting(xprt);
}
-static void xs_sock_mark_closed(struct rpc_xprt *xprt)
+static void xs_sock_reset_connection_flags(struct rpc_xprt *xprt)
{
smp_mb__before_clear_bit();
clear_bit(XPRT_CONNECTION_ABORT, &xprt->state);
@@ -1461,6 +1458,11 @@
clear_bit(XPRT_CLOSE_WAIT, &xprt->state);
clear_bit(XPRT_CLOSING, &xprt->state);
smp_mb__after_clear_bit();
+}
+
+static void xs_sock_mark_closed(struct rpc_xprt *xprt)
+{
+ xs_sock_reset_connection_flags(xprt);
/* Mark transport as closed and wake up all pending tasks */
xprt_disconnect_done(xprt);
}
@@ -1516,6 +1518,7 @@
case TCP_CLOSE_WAIT:
/* The server initiated a shutdown of the socket */
xprt->connect_cookie++;
+ clear_bit(XPRT_CONNECTED, &xprt->state);
xs_tcp_force_close(xprt);
case TCP_CLOSING:
/*
@@ -1540,25 +1543,6 @@
read_unlock_bh(&sk->sk_callback_lock);
}
-/**
- * xs_error_report - callback mainly for catching socket errors
- * @sk: socket
- */
-static void xs_error_report(struct sock *sk)
-{
- struct rpc_xprt *xprt;
-
- read_lock_bh(&sk->sk_callback_lock);
- if (!(xprt = xprt_from_sock(sk)))
- goto out;
- dprintk("RPC: %s client %p...\n"
- "RPC: error %d\n",
- __func__, xprt, sk->sk_err);
- xprt_wake_pending_tasks(xprt, -EAGAIN);
-out:
- read_unlock_bh(&sk->sk_callback_lock);
-}
-
static void xs_write_space(struct sock *sk)
{
struct socket *sock;
@@ -1858,7 +1842,6 @@
sk->sk_user_data = xprt;
sk->sk_data_ready = xs_local_data_ready;
sk->sk_write_space = xs_udp_write_space;
- sk->sk_error_report = xs_error_report;
sk->sk_allocation = GFP_ATOMIC;
xprt_clear_connected(xprt);
@@ -1983,7 +1966,6 @@
sk->sk_user_data = xprt;
sk->sk_data_ready = xs_udp_data_ready;
sk->sk_write_space = xs_udp_write_space;
- sk->sk_error_report = xs_error_report;
sk->sk_no_check = UDP_CSUM_NORCV;
sk->sk_allocation = GFP_ATOMIC;
@@ -2050,10 +2032,8 @@
any.sa_family = AF_UNSPEC;
result = kernel_connect(transport->sock, &any, sizeof(any), 0);
if (!result)
- xs_sock_mark_closed(&transport->xprt);
- else
- dprintk("RPC: AF_UNSPEC connect return code %d\n",
- result);
+ xs_sock_reset_connection_flags(&transport->xprt);
+ dprintk("RPC: AF_UNSPEC connect return code %d\n", result);
}
static void xs_tcp_reuse_connection(struct sock_xprt *transport)
@@ -2098,7 +2078,6 @@
sk->sk_data_ready = xs_tcp_data_ready;
sk->sk_state_change = xs_tcp_state_change;
sk->sk_write_space = xs_tcp_write_space;
- sk->sk_error_report = xs_error_report;
sk->sk_allocation = GFP_ATOMIC;
/* socket options */
diff --git a/net/tipc/handler.c b/net/tipc/handler.c
index 111ff83..b36f0fc 100644
--- a/net/tipc/handler.c
+++ b/net/tipc/handler.c
@@ -116,7 +116,6 @@
return;
handler_enabled = 0;
- tasklet_disable(&tipc_tasklet);
tasklet_kill(&tipc_tasklet);
spin_lock_bh(&qitem_lock);
diff --git a/net/wireless/core.c b/net/wireless/core.c
index 443d4d7..3f72530 100644
--- a/net/wireless/core.c
+++ b/net/wireless/core.c
@@ -526,8 +526,7 @@
for (i = 0; i < sband->n_channels; i++) {
sband->channels[i].orig_flags =
sband->channels[i].flags;
- sband->channels[i].orig_mag =
- sband->channels[i].max_antenna_gain;
+ sband->channels[i].orig_mag = INT_MAX;
sband->channels[i].orig_mpwr =
sband->channels[i].max_power;
sband->channels[i].band = band;
diff --git a/net/wireless/mlme.c b/net/wireless/mlme.c
index 8016fee..904a7f3 100644
--- a/net/wireless/mlme.c
+++ b/net/wireless/mlme.c
@@ -457,20 +457,14 @@
.reason_code = reason,
.ie = ie,
.ie_len = ie_len,
+ .local_state_change = local_state_change,
};
ASSERT_WDEV_LOCK(wdev);
- if (local_state_change) {
- if (wdev->current_bss &&
- ether_addr_equal(wdev->current_bss->pub.bssid, bssid)) {
- cfg80211_unhold_bss(wdev->current_bss);
- cfg80211_put_bss(&wdev->current_bss->pub);
- wdev->current_bss = NULL;
- }
-
+ if (local_state_change && (!wdev->current_bss ||
+ !ether_addr_equal(wdev->current_bss->pub.bssid, bssid)))
return 0;
- }
return rdev->ops->deauth(&rdev->wiphy, dev, &req);
}
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index 3b8cbbc..b75756b 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -141,9 +141,8 @@
.reg_rules = {
/* IEEE 802.11b/g, channels 1..11 */
REG_RULE(2412-10, 2462+10, 40, 6, 20, 0),
- /* IEEE 802.11b/g, channels 12..13. No HT40
- * channel fits here. */
- REG_RULE(2467-10, 2472+10, 20, 6, 20,
+ /* IEEE 802.11b/g, channels 12..13. */
+ REG_RULE(2467-10, 2472+10, 40, 6, 20,
NL80211_RRF_PASSIVE_SCAN |
NL80211_RRF_NO_IBSS),
/* IEEE 802.11 channel 14 - Only JP enables
@@ -908,7 +907,7 @@
map_regdom_flags(reg_rule->flags) | bw_flags;
chan->max_antenna_gain = chan->orig_mag =
(int) MBI_TO_DBI(power_rule->max_antenna_gain);
- chan->max_power = chan->orig_mpwr =
+ chan->max_reg_power = chan->max_power = chan->orig_mpwr =
(int) MBM_TO_DBM(power_rule->max_eirp);
return;
}
@@ -1331,7 +1330,8 @@
chan->flags |= map_regdom_flags(reg_rule->flags) | bw_flags;
chan->max_antenna_gain = (int) MBI_TO_DBI(power_rule->max_antenna_gain);
- chan->max_power = (int) MBM_TO_DBM(power_rule->max_eirp);
+ chan->max_reg_power = chan->max_power =
+ (int) MBM_TO_DBM(power_rule->max_eirp);
}
static void handle_band_custom(struct wiphy *wiphy, enum ieee80211_band band,
diff --git a/net/wireless/util.c b/net/wireless/util.c
index ef35f4e..2762e83 100644
--- a/net/wireless/util.c
+++ b/net/wireless/util.c
@@ -309,23 +309,21 @@
}
EXPORT_SYMBOL(ieee80211_get_hdrlen_from_skb);
-static int ieee80211_get_mesh_hdrlen(struct ieee80211s_hdr *meshhdr)
+unsigned int ieee80211_get_mesh_hdrlen(struct ieee80211s_hdr *meshhdr)
{
int ae = meshhdr->flags & MESH_FLAGS_AE;
- /* 7.1.3.5a.2 */
+ /* 802.11-2012, 8.2.4.7.3 */
switch (ae) {
+ default:
case 0:
return 6;
case MESH_FLAGS_AE_A4:
return 12;
case MESH_FLAGS_AE_A5_A6:
return 18;
- case (MESH_FLAGS_AE_A4 | MESH_FLAGS_AE_A5_A6):
- return 24;
- default:
- return 6;
}
}
+EXPORT_SYMBOL(ieee80211_get_mesh_hdrlen);
int ieee80211_data_to_8023(struct sk_buff *skb, const u8 *addr,
enum nl80211_iftype iftype)
@@ -373,6 +371,8 @@
/* make sure meshdr->flags is on the linear part */
if (!pskb_may_pull(skb, hdrlen + 1))
return -1;
+ if (meshdr->flags & MESH_FLAGS_AE_A4)
+ return -1;
if (meshdr->flags & MESH_FLAGS_AE_A5_A6) {
skb_copy_bits(skb, hdrlen +
offsetof(struct ieee80211s_hdr, eaddr1),
@@ -397,6 +397,8 @@
/* make sure meshdr->flags is on the linear part */
if (!pskb_may_pull(skb, hdrlen + 1))
return -1;
+ if (meshdr->flags & MESH_FLAGS_AE_A5_A6)
+ return -1;
if (meshdr->flags & MESH_FLAGS_AE_A4)
skb_copy_bits(skb, hdrlen +
offsetof(struct ieee80211s_hdr, eaddr1),
diff --git a/scripts/Makefile.modinst b/scripts/Makefile.modinst
index dda4b2b..ecbb44797 100644
--- a/scripts/Makefile.modinst
+++ b/scripts/Makefile.modinst
@@ -16,8 +16,9 @@
__modinst: $(modules)
@:
+# Don't stop modules_install if we can't sign external modules.
quiet_cmd_modules_install = INSTALL $@
- cmd_modules_install = mkdir -p $(2); cp $@ $(2) ; $(mod_strip_cmd) $(2)/$(notdir $@) ; $(mod_sign_cmd) $(2)/$(notdir $@)
+ cmd_modules_install = mkdir -p $(2); cp $@ $(2) ; $(mod_strip_cmd) $(2)/$(notdir $@) ; $(mod_sign_cmd) $(2)/$(notdir $@) $(patsubst %,|| true,$(KBUILD_EXTMOD))
# Modules built outside the kernel source tree go into extra by default
INSTALL_MOD_DIR ?= extra
diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
index 21a9f5d..f18750e 100755
--- a/scripts/checkpatch.pl
+++ b/scripts/checkpatch.pl
@@ -1890,8 +1890,10 @@
}
if ($realfile =~ m@^(drivers/net/|net/)@ &&
- $rawline !~ m@^\+[ \t]*(\/\*|\*\/)@ &&
- $rawline =~ m@^\+[ \t]*.+\*\/[ \t]*$@) {
+ $rawline !~ m@^\+[ \t]*\*/[ \t]*$@ && #trailing */
+ $rawline !~ m@^\+.*/\*.*\*/[ \t]*$@ && #inline /*...*/
+ $rawline !~ m@^\+.*\*{2,}/[ \t]*$@ && #trailing **/
+ $rawline =~ m@^\+[ \t]*.+\*\/[ \t]*$@) { #non blank */
WARN("NETWORKING_BLOCK_COMMENT_STYLE",
"networking block comments put the trailing */ on a separate line\n" . $herecurr);
}
diff --git a/scripts/kconfig/expr.h b/scripts/kconfig/expr.h
index bd2e098..cdd4860 100644
--- a/scripts/kconfig/expr.h
+++ b/scripts/kconfig/expr.h
@@ -12,7 +12,7 @@
#include <assert.h>
#include <stdio.h>
-#include <sys/queue.h>
+#include "list.h"
#ifndef __cplusplus
#include <stdbool.h>
#endif
@@ -175,12 +175,11 @@
#define MENU_ROOT 0x0002
struct jump_key {
- CIRCLEQ_ENTRY(jump_key) entries;
+ struct list_head entries;
size_t offset;
struct menu *target;
int index;
};
-CIRCLEQ_HEAD(jk_head, jump_key);
#define JUMP_NB 9
diff --git a/scripts/kconfig/list.h b/scripts/kconfig/list.h
new file mode 100644
index 0000000..0ae730b
--- /dev/null
+++ b/scripts/kconfig/list.h
@@ -0,0 +1,91 @@
+#ifndef LIST_H
+#define LIST_H
+
+/*
+ * Copied from include/linux/...
+ */
+
+#undef offsetof
+#define offsetof(TYPE, MEMBER) ((size_t) &((TYPE *)0)->MEMBER)
+
+/**
+ * container_of - cast a member of a structure out to the containing structure
+ * @ptr: the pointer to the member.
+ * @type: the type of the container struct this is embedded in.
+ * @member: the name of the member within the struct.
+ *
+ */
+#define container_of(ptr, type, member) ({ \
+ const typeof( ((type *)0)->member ) *__mptr = (ptr); \
+ (type *)( (char *)__mptr - offsetof(type,member) );})
+
+
+struct list_head {
+ struct list_head *next, *prev;
+};
+
+
+#define LIST_HEAD_INIT(name) { &(name), &(name) }
+
+#define LIST_HEAD(name) \
+ struct list_head name = LIST_HEAD_INIT(name)
+
+/**
+ * list_entry - get the struct for this entry
+ * @ptr: the &struct list_head pointer.
+ * @type: the type of the struct this is embedded in.
+ * @member: the name of the list_struct within the struct.
+ */
+#define list_entry(ptr, type, member) \
+ container_of(ptr, type, member)
+
+/**
+ * list_for_each_entry - iterate over list of given type
+ * @pos: the type * to use as a loop cursor.
+ * @head: the head for your list.
+ * @member: the name of the list_struct within the struct.
+ */
+#define list_for_each_entry(pos, head, member) \
+ for (pos = list_entry((head)->next, typeof(*pos), member); \
+ &pos->member != (head); \
+ pos = list_entry(pos->member.next, typeof(*pos), member))
+
+/**
+ * list_empty - tests whether a list is empty
+ * @head: the list to test.
+ */
+static inline int list_empty(const struct list_head *head)
+{
+ return head->next == head;
+}
+
+/*
+ * Insert a new entry between two known consecutive entries.
+ *
+ * This is only for internal list manipulation where we know
+ * the prev/next entries already!
+ */
+static inline void __list_add(struct list_head *_new,
+ struct list_head *prev,
+ struct list_head *next)
+{
+ next->prev = _new;
+ _new->next = next;
+ _new->prev = prev;
+ prev->next = _new;
+}
+
+/**
+ * list_add_tail - add a new entry
+ * @new: new entry to be added
+ * @head: list head to add it before
+ *
+ * Insert a new entry before the specified head.
+ * This is useful for implementing queues.
+ */
+static inline void list_add_tail(struct list_head *_new, struct list_head *head)
+{
+ __list_add(_new, head->prev, head);
+}
+
+#endif
diff --git a/scripts/kconfig/lkc_proto.h b/scripts/kconfig/lkc_proto.h
index 1d1c085..ef1a738 100644
--- a/scripts/kconfig/lkc_proto.h
+++ b/scripts/kconfig/lkc_proto.h
@@ -21,9 +21,9 @@
P(menu_get_parent_menu,struct menu *,(struct menu *menu));
P(menu_has_help,bool,(struct menu *menu));
P(menu_get_help,const char *,(struct menu *menu));
-P(get_symbol_str, void, (struct gstr *r, struct symbol *sym, struct jk_head
+P(get_symbol_str, void, (struct gstr *r, struct symbol *sym, struct list_head
*head));
-P(get_relations_str, struct gstr, (struct symbol **sym_arr, struct jk_head
+P(get_relations_str, struct gstr, (struct symbol **sym_arr, struct list_head
*head));
P(menu_get_ext_help,void,(struct menu *menu, struct gstr *help));
diff --git a/scripts/kconfig/mconf.c b/scripts/kconfig/mconf.c
index 48f6744..53975cf 100644
--- a/scripts/kconfig/mconf.c
+++ b/scripts/kconfig/mconf.c
@@ -312,7 +312,7 @@
struct search_data {
- struct jk_head *head;
+ struct list_head *head;
struct menu **targets;
int *keys;
};
@@ -323,7 +323,7 @@
struct jump_key *pos;
int k = 0;
- CIRCLEQ_FOREACH(pos, data->head, entries) {
+ list_for_each_entry(pos, data->head, entries) {
if (pos->offset >= start && pos->offset < end) {
char header[4];
@@ -375,7 +375,7 @@
sym_arr = sym_re_search(dialog_input);
do {
- struct jk_head head = CIRCLEQ_HEAD_INITIALIZER(head);
+ LIST_HEAD(head);
struct menu *targets[JUMP_NB];
int keys[JUMP_NB + 1], i;
struct search_data data = {
diff --git a/scripts/kconfig/menu.c b/scripts/kconfig/menu.c
index a3cade6..e98a05c 100644
--- a/scripts/kconfig/menu.c
+++ b/scripts/kconfig/menu.c
@@ -508,7 +508,7 @@
}
static void get_prompt_str(struct gstr *r, struct property *prop,
- struct jk_head *head)
+ struct list_head *head)
{
int i, j;
struct menu *submenu[8], *menu, *location = NULL;
@@ -544,12 +544,13 @@
} else
jump->target = location;
- if (CIRCLEQ_EMPTY(head))
+ if (list_empty(head))
jump->index = 0;
else
- jump->index = CIRCLEQ_LAST(head)->index + 1;
+ jump->index = list_entry(head->prev, struct jump_key,
+ entries)->index + 1;
- CIRCLEQ_INSERT_TAIL(head, jump, entries);
+ list_add_tail(&jump->entries, head);
}
if (i > 0) {
@@ -573,7 +574,8 @@
/*
* head is optional and may be NULL
*/
-void get_symbol_str(struct gstr *r, struct symbol *sym, struct jk_head *head)
+void get_symbol_str(struct gstr *r, struct symbol *sym,
+ struct list_head *head)
{
bool hit;
struct property *prop;
@@ -612,7 +614,7 @@
str_append(r, "\n\n");
}
-struct gstr get_relations_str(struct symbol **sym_arr, struct jk_head *head)
+struct gstr get_relations_str(struct symbol **sym_arr, struct list_head *head)
{
struct symbol *sym;
struct gstr res = str_new();
diff --git a/scripts/sign-file b/scripts/sign-file
index 87ca59d..974a20b 100755
--- a/scripts/sign-file
+++ b/scripts/sign-file
@@ -156,12 +156,12 @@
if ($l == 0x1) {
$len = unpack("C", substr(${$cursor->[2]}, $cursor->[0], 1));
- } elsif ($l = 0x2) {
+ } elsif ($l == 0x2) {
$len = unpack("n", substr(${$cursor->[2]}, $cursor->[0], 2));
- } elsif ($l = 0x3) {
+ } elsif ($l == 0x3) {
$len = unpack("C", substr(${$cursor->[2]}, $cursor->[0], 1)) << 16;
$len = unpack("n", substr(${$cursor->[2]}, $cursor->[0] + 1, 2));
- } elsif ($l = 0x4) {
+ } elsif ($l == 0x4) {
$len = unpack("N", substr(${$cursor->[2]}, $cursor->[0], 4));
} else {
die $x509, ": ", $cursor->[0], ": ASN.1 element too long (", $l, ")\n";
diff --git a/security/apparmor/policy.c b/security/apparmor/policy.c
index cf5fd22..8132003 100644
--- a/security/apparmor/policy.c
+++ b/security/apparmor/policy.c
@@ -724,6 +724,8 @@
*/
static void free_profile(struct aa_profile *profile)
{
+ struct aa_profile *p;
+
AA_DEBUG("%s(%p)\n", __func__, profile);
if (!profile)
@@ -751,7 +753,27 @@
aa_put_dfa(profile->xmatch);
aa_put_dfa(profile->policy.dfa);
- aa_put_profile(profile->replacedby);
+ /* put the profile reference for replacedby, but not via
+ * put_profile(kref_put).
+ * replacedby can form a long chain that can result in cascading
+ * frees that blows the stack because kref_put makes a nested fn
+ * call (it looks like recursion, with free_profile calling
+ * free_profile) for each profile in the chain lp#1056078.
+ */
+ for (p = profile->replacedby; p; ) {
+ if (atomic_dec_and_test(&p->base.count.refcount)) {
+ /* no more refs on p, grab its replacedby */
+ struct aa_profile *next = p->replacedby;
+ /* break the chain */
+ p->replacedby = NULL;
+ /* now free p, chain is broken */
+ free_profile(p);
+
+ /* follow up with next profile in the chain */
+ p = next;
+ } else
+ break;
+ }
kzfree(profile);
}
diff --git a/security/device_cgroup.c b/security/device_cgroup.c
index 44dfc41..b08d20c 100644
--- a/security/device_cgroup.c
+++ b/security/device_cgroup.c
@@ -42,7 +42,10 @@
struct dev_cgroup {
struct cgroup_subsys_state css;
struct list_head exceptions;
- bool deny_all;
+ enum {
+ DEVCG_DEFAULT_ALLOW,
+ DEVCG_DEFAULT_DENY,
+ } behavior;
};
static inline struct dev_cgroup *css_to_devcgroup(struct cgroup_subsys_state *s)
@@ -161,8 +164,8 @@
struct dev_exception_item *ex, *tmp;
list_for_each_entry_safe(ex, tmp, &dev_cgroup->exceptions, list) {
- list_del(&ex->list);
- kfree(ex);
+ list_del_rcu(&ex->list);
+ kfree_rcu(ex, rcu);
}
}
@@ -182,13 +185,13 @@
parent_cgroup = cgroup->parent;
if (parent_cgroup == NULL)
- dev_cgroup->deny_all = false;
+ dev_cgroup->behavior = DEVCG_DEFAULT_ALLOW;
else {
parent_dev_cgroup = cgroup_to_devcgroup(parent_cgroup);
mutex_lock(&devcgroup_mutex);
ret = dev_exceptions_copy(&dev_cgroup->exceptions,
&parent_dev_cgroup->exceptions);
- dev_cgroup->deny_all = parent_dev_cgroup->deny_all;
+ dev_cgroup->behavior = parent_dev_cgroup->behavior;
mutex_unlock(&devcgroup_mutex);
if (ret) {
kfree(dev_cgroup);
@@ -260,7 +263,7 @@
* - List the exceptions in case the default policy is to deny
* This way, the file remains as a "whitelist of devices"
*/
- if (devcgroup->deny_all == false) {
+ if (devcgroup->behavior == DEVCG_DEFAULT_ALLOW) {
set_access(acc, ACC_MASK);
set_majmin(maj, ~0);
set_majmin(min, ~0);
@@ -295,7 +298,7 @@
struct dev_exception_item *ex;
bool match = false;
- list_for_each_entry(ex, &dev_cgroup->exceptions, list) {
+ list_for_each_entry_rcu(ex, &dev_cgroup->exceptions, list) {
if ((refex->type & DEV_BLOCK) && !(ex->type & DEV_BLOCK))
continue;
if ((refex->type & DEV_CHAR) && !(ex->type & DEV_CHAR))
@@ -314,12 +317,12 @@
* In two cases we'll consider this new exception valid:
* - the dev cgroup has its default policy to allow + exception list:
* the new exception should *not* match any of the exceptions
- * (!deny_all, !match)
+ * (behavior == DEVCG_DEFAULT_ALLOW, !match)
* - the dev cgroup has its default policy to deny + exception list:
* the new exception *should* match the exceptions
- * (deny_all, match)
+ * (behavior == DEVCG_DEFAULT_DENY, match)
*/
- if (dev_cgroup->deny_all == match)
+ if ((dev_cgroup->behavior == DEVCG_DEFAULT_DENY) == match)
return 1;
return 0;
}
@@ -341,6 +344,19 @@
return may_access(parent, ex);
}
+/**
+ * may_allow_all - checks if it's possible to change the behavior to
+ * allow based on parent's rules.
+ * @parent: device cgroup's parent
+ * returns: != 0 in case it's allowed, 0 otherwise
+ */
+static inline int may_allow_all(struct dev_cgroup *parent)
+{
+ if (!parent)
+ return 1;
+ return parent->behavior == DEVCG_DEFAULT_ALLOW;
+}
+
/*
* Modify the exception list using allow/deny rules.
* CAP_SYS_ADMIN is needed for this. It's at least separate from CAP_MKNOD
@@ -358,13 +374,18 @@
int filetype, const char *buffer)
{
const char *b;
- char *endp;
- int count;
+ char temp[12]; /* 11 + 1 characters needed for a u32 */
+ int count, rc;
struct dev_exception_item ex;
+ struct cgroup *p = devcgroup->css.cgroup;
+ struct dev_cgroup *parent = NULL;
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
+ if (p->parent)
+ parent = cgroup_to_devcgroup(p->parent);
+
memset(&ex, 0, sizeof(ex));
b = buffer;
@@ -372,14 +393,21 @@
case 'a':
switch (filetype) {
case DEVCG_ALLOW:
- if (!parent_has_perm(devcgroup, &ex))
+ if (!may_allow_all(parent))
return -EPERM;
dev_exception_clean(devcgroup);
- devcgroup->deny_all = false;
+ devcgroup->behavior = DEVCG_DEFAULT_ALLOW;
+ if (!parent)
+ break;
+
+ rc = dev_exceptions_copy(&devcgroup->exceptions,
+ &parent->exceptions);
+ if (rc)
+ return rc;
break;
case DEVCG_DENY:
dev_exception_clean(devcgroup);
- devcgroup->deny_all = true;
+ devcgroup->behavior = DEVCG_DEFAULT_DENY;
break;
default:
return -EINVAL;
@@ -402,8 +430,16 @@
ex.major = ~0;
b++;
} else if (isdigit(*b)) {
- ex.major = simple_strtoul(b, &endp, 10);
- b = endp;
+ memset(temp, 0, sizeof(temp));
+ for (count = 0; count < sizeof(temp) - 1; count++) {
+ temp[count] = *b;
+ b++;
+ if (!isdigit(*b))
+ break;
+ }
+ rc = kstrtou32(temp, 10, &ex.major);
+ if (rc)
+ return -EINVAL;
} else {
return -EINVAL;
}
@@ -416,8 +452,16 @@
ex.minor = ~0;
b++;
} else if (isdigit(*b)) {
- ex.minor = simple_strtoul(b, &endp, 10);
- b = endp;
+ memset(temp, 0, sizeof(temp));
+ for (count = 0; count < sizeof(temp) - 1; count++) {
+ temp[count] = *b;
+ b++;
+ if (!isdigit(*b))
+ break;
+ }
+ rc = kstrtou32(temp, 10, &ex.minor);
+ if (rc)
+ return -EINVAL;
} else {
return -EINVAL;
}
@@ -452,7 +496,7 @@
* an matching exception instead. And be silent about it: we
* don't want to break compatibility
*/
- if (devcgroup->deny_all == false) {
+ if (devcgroup->behavior == DEVCG_DEFAULT_ALLOW) {
dev_exception_rm(devcgroup, &ex);
return 0;
}
@@ -463,7 +507,7 @@
* an matching exception instead. And be silent about it: we
* don't want to break compatibility
*/
- if (devcgroup->deny_all == true) {
+ if (devcgroup->behavior == DEVCG_DEFAULT_DENY) {
dev_exception_rm(devcgroup, &ex);
return 0;
}
@@ -533,10 +577,10 @@
*
* returns 0 on success, -EPERM case the operation is not permitted
*/
-static int __devcgroup_check_permission(struct dev_cgroup *dev_cgroup,
- short type, u32 major, u32 minor,
+static int __devcgroup_check_permission(short type, u32 major, u32 minor,
short access)
{
+ struct dev_cgroup *dev_cgroup;
struct dev_exception_item ex;
int rc;
@@ -547,6 +591,7 @@
ex.access = access;
rcu_read_lock();
+ dev_cgroup = task_devcgroup(current);
rc = may_access(dev_cgroup, &ex);
rcu_read_unlock();
@@ -558,7 +603,6 @@
int __devcgroup_inode_permission(struct inode *inode, int mask)
{
- struct dev_cgroup *dev_cgroup = task_devcgroup(current);
short type, access = 0;
if (S_ISBLK(inode->i_mode))
@@ -570,13 +614,12 @@
if (mask & MAY_READ)
access |= ACC_READ;
- return __devcgroup_check_permission(dev_cgroup, type, imajor(inode),
- iminor(inode), access);
+ return __devcgroup_check_permission(type, imajor(inode), iminor(inode),
+ access);
}
int devcgroup_inode_mknod(int mode, dev_t dev)
{
- struct dev_cgroup *dev_cgroup = task_devcgroup(current);
short type;
if (!S_ISBLK(mode) && !S_ISCHR(mode))
@@ -587,7 +630,7 @@
else
type = DEV_CHAR;
- return __devcgroup_check_permission(dev_cgroup, type, MAJOR(dev),
- MINOR(dev), ACC_MKNOD);
+ return __devcgroup_check_permission(type, MAJOR(dev), MINOR(dev),
+ ACC_MKNOD);
}
diff --git a/security/selinux/netnode.c b/security/selinux/netnode.c
index 28f911c..c5454c0 100644
--- a/security/selinux/netnode.c
+++ b/security/selinux/netnode.c
@@ -174,7 +174,8 @@
if (sel_netnode_hash[idx].size == SEL_NETNODE_HASH_BKT_LIMIT) {
struct sel_netnode *tail;
tail = list_entry(
- rcu_dereference(sel_netnode_hash[idx].list.prev),
+ rcu_dereference_protected(sel_netnode_hash[idx].list.prev,
+ lockdep_is_held(&sel_netnode_lock)),
struct sel_netnode, list);
list_del_rcu(&tail->list);
kfree_rcu(tail, rcu);
diff --git a/sound/core/compress_offload.c b/sound/core/compress_offload.c
index c40ae57..ad11dc99 100644
--- a/sound/core/compress_offload.c
+++ b/sound/core/compress_offload.c
@@ -100,12 +100,15 @@
if (dirn != compr->direction) {
pr_err("this device doesn't support this direction\n");
+ snd_card_unref(compr->card);
return -EINVAL;
}
data = kzalloc(sizeof(*data), GFP_KERNEL);
- if (!data)
+ if (!data) {
+ snd_card_unref(compr->card);
return -ENOMEM;
+ }
data->stream.ops = compr->ops;
data->stream.direction = dirn;
data->stream.private_data = compr->private_data;
@@ -113,6 +116,7 @@
runtime = kzalloc(sizeof(*runtime), GFP_KERNEL);
if (!runtime) {
kfree(data);
+ snd_card_unref(compr->card);
return -ENOMEM;
}
runtime->state = SNDRV_PCM_STATE_OPEN;
@@ -126,7 +130,8 @@
kfree(runtime);
kfree(data);
}
- return ret;
+ snd_card_unref(compr->card);
+ return 0;
}
static int snd_compr_free(struct inode *inode, struct file *f)
diff --git a/sound/core/control.c b/sound/core/control.c
index 7e86a5b..8c7c2c9 100644
--- a/sound/core/control.c
+++ b/sound/core/control.c
@@ -86,6 +86,7 @@
write_lock_irqsave(&card->ctl_files_rwlock, flags);
list_add_tail(&ctl->list, &card->ctl_files);
write_unlock_irqrestore(&card->ctl_files_rwlock, flags);
+ snd_card_unref(card);
return 0;
__error:
@@ -93,6 +94,8 @@
__error2:
snd_card_file_remove(card, file);
__error1:
+ if (card)
+ snd_card_unref(card);
return err;
}
@@ -1434,6 +1437,8 @@
spin_unlock_irq(&ctl->read_lock);
schedule();
remove_wait_queue(&ctl->change_sleep, &wait);
+ if (ctl->card->shutdown)
+ return -ENODEV;
if (signal_pending(current))
return -ERESTARTSYS;
spin_lock_irq(&ctl->read_lock);
diff --git a/sound/core/hwdep.c b/sound/core/hwdep.c
index 75ea16f..3f7f662 100644
--- a/sound/core/hwdep.c
+++ b/sound/core/hwdep.c
@@ -100,8 +100,10 @@
if (hw == NULL)
return -ENODEV;
- if (!try_module_get(hw->card->module))
+ if (!try_module_get(hw->card->module)) {
+ snd_card_unref(hw->card);
return -EFAULT;
+ }
init_waitqueue_entry(&wait, current);
add_wait_queue(&hw->open_wait, &wait);
@@ -129,6 +131,10 @@
mutex_unlock(&hw->open_mutex);
schedule();
mutex_lock(&hw->open_mutex);
+ if (hw->card->shutdown) {
+ err = -ENODEV;
+ break;
+ }
if (signal_pending(current)) {
err = -ERESTARTSYS;
break;
@@ -148,6 +154,7 @@
mutex_unlock(&hw->open_mutex);
if (err < 0)
module_put(hw->card->module);
+ snd_card_unref(hw->card);
return err;
}
@@ -459,12 +466,15 @@
mutex_unlock(®ister_mutex);
return -EINVAL;
}
+ mutex_lock(&hwdep->open_mutex);
+ wake_up(&hwdep->open_wait);
#ifdef CONFIG_SND_OSSEMUL
if (hwdep->ossreg)
snd_unregister_oss_device(hwdep->oss_type, hwdep->card, hwdep->device);
#endif
snd_unregister_device(SNDRV_DEVICE_TYPE_HWDEP, hwdep->card, hwdep->device);
list_del_init(&hwdep->list);
+ mutex_unlock(&hwdep->open_mutex);
mutex_unlock(®ister_mutex);
return 0;
}
diff --git a/sound/core/init.c b/sound/core/init.c
index d8ec849..7b012d1 100644
--- a/sound/core/init.c
+++ b/sound/core/init.c
@@ -213,6 +213,7 @@
spin_lock_init(&card->files_lock);
INIT_LIST_HEAD(&card->files_list);
init_waitqueue_head(&card->shutdown_sleep);
+ atomic_set(&card->refcount, 0);
#ifdef CONFIG_PM
mutex_init(&card->power_lock);
init_waitqueue_head(&card->power_sleep);
@@ -446,21 +447,36 @@
return 0;
}
+/**
+ * snd_card_unref - release the reference counter
+ * @card: the card instance
+ *
+ * Decrements the reference counter. When it reaches to zero, wake up
+ * the sleeper and call the destructor if needed.
+ */
+void snd_card_unref(struct snd_card *card)
+{
+ if (atomic_dec_and_test(&card->refcount)) {
+ wake_up(&card->shutdown_sleep);
+ if (card->free_on_last_close)
+ snd_card_do_free(card);
+ }
+}
+EXPORT_SYMBOL(snd_card_unref);
+
int snd_card_free_when_closed(struct snd_card *card)
{
- int free_now = 0;
- int ret = snd_card_disconnect(card);
- if (ret)
+ int ret;
+
+ atomic_inc(&card->refcount);
+ ret = snd_card_disconnect(card);
+ if (ret) {
+ atomic_dec(&card->refcount);
return ret;
+ }
- spin_lock(&card->files_lock);
- if (list_empty(&card->files_list))
- free_now = 1;
- else
- card->free_on_last_close = 1;
- spin_unlock(&card->files_lock);
-
- if (free_now)
+ card->free_on_last_close = 1;
+ if (atomic_dec_and_test(&card->refcount))
snd_card_do_free(card);
return 0;
}
@@ -474,7 +490,7 @@
return ret;
/* wait, until all devices are ready for the free operation */
- wait_event(card->shutdown_sleep, list_empty(&card->files_list));
+ wait_event(card->shutdown_sleep, !atomic_read(&card->refcount));
snd_card_do_free(card);
return 0;
}
@@ -886,6 +902,7 @@
return -ENODEV;
}
list_add(&mfile->list, &card->files_list);
+ atomic_inc(&card->refcount);
spin_unlock(&card->files_lock);
return 0;
}
@@ -908,7 +925,6 @@
int snd_card_file_remove(struct snd_card *card, struct file *file)
{
struct snd_monitor_file *mfile, *found = NULL;
- int last_close = 0;
spin_lock(&card->files_lock);
list_for_each_entry(mfile, &card->files_list, list) {
@@ -923,19 +939,13 @@
break;
}
}
- if (list_empty(&card->files_list))
- last_close = 1;
spin_unlock(&card->files_lock);
- if (last_close) {
- wake_up(&card->shutdown_sleep);
- if (card->free_on_last_close)
- snd_card_do_free(card);
- }
if (!found) {
snd_printk(KERN_ERR "ALSA card file remove problem (%p)\n", file);
return -ENOENT;
}
kfree(found);
+ snd_card_unref(card);
return 0;
}
diff --git a/sound/core/oss/mixer_oss.c b/sound/core/oss/mixer_oss.c
index 29f6ded..e8a1d18 100644
--- a/sound/core/oss/mixer_oss.c
+++ b/sound/core/oss/mixer_oss.c
@@ -52,14 +52,19 @@
SNDRV_OSS_DEVICE_TYPE_MIXER);
if (card == NULL)
return -ENODEV;
- if (card->mixer_oss == NULL)
+ if (card->mixer_oss == NULL) {
+ snd_card_unref(card);
return -ENODEV;
+ }
err = snd_card_file_add(card, file);
- if (err < 0)
+ if (err < 0) {
+ snd_card_unref(card);
return err;
+ }
fmixer = kzalloc(sizeof(*fmixer), GFP_KERNEL);
if (fmixer == NULL) {
snd_card_file_remove(card, file);
+ snd_card_unref(card);
return -ENOMEM;
}
fmixer->card = card;
@@ -68,8 +73,10 @@
if (!try_module_get(card->module)) {
kfree(fmixer);
snd_card_file_remove(card, file);
+ snd_card_unref(card);
return -EFAULT;
}
+ snd_card_unref(card);
return 0;
}
diff --git a/sound/core/oss/pcm_oss.c b/sound/core/oss/pcm_oss.c
index 08fde00..4c1cc51 100644
--- a/sound/core/oss/pcm_oss.c
+++ b/sound/core/oss/pcm_oss.c
@@ -2441,6 +2441,10 @@
mutex_unlock(&pcm->open_mutex);
schedule();
mutex_lock(&pcm->open_mutex);
+ if (pcm->card->shutdown) {
+ err = -ENODEV;
+ break;
+ }
if (signal_pending(current)) {
err = -ERESTARTSYS;
break;
@@ -2450,6 +2454,7 @@
mutex_unlock(&pcm->open_mutex);
if (err < 0)
goto __error;
+ snd_card_unref(pcm->card);
return err;
__error:
@@ -2457,6 +2462,8 @@
__error2:
snd_card_file_remove(pcm->card, file);
__error1:
+ if (pcm)
+ snd_card_unref(pcm->card);
return err;
}
diff --git a/sound/core/pcm.c b/sound/core/pcm.c
index f299194..030102c 100644
--- a/sound/core/pcm.c
+++ b/sound/core/pcm.c
@@ -1086,11 +1086,19 @@
if (list_empty(&pcm->list))
goto unlock;
+ mutex_lock(&pcm->open_mutex);
+ wake_up(&pcm->open_wait);
list_del_init(&pcm->list);
for (cidx = 0; cidx < 2; cidx++)
- for (substream = pcm->streams[cidx].substream; substream; substream = substream->next)
- if (substream->runtime)
+ for (substream = pcm->streams[cidx].substream; substream; substream = substream->next) {
+ snd_pcm_stream_lock_irq(substream);
+ if (substream->runtime) {
substream->runtime->status->state = SNDRV_PCM_STATE_DISCONNECTED;
+ wake_up(&substream->runtime->sleep);
+ wake_up(&substream->runtime->tsleep);
+ }
+ snd_pcm_stream_unlock_irq(substream);
+ }
list_for_each_entry(notify, &snd_pcm_notify_list, list) {
notify->n_disconnect(pcm);
}
@@ -1110,6 +1118,7 @@
pcm->streams[cidx].chmap_kctl = NULL;
}
}
+ mutex_unlock(&pcm->open_mutex);
unlock:
mutex_unlock(®ister_mutex);
return 0;
diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c
index 5e12e5ba..f9ddecf 100644
--- a/sound/core/pcm_native.c
+++ b/sound/core/pcm_native.c
@@ -369,6 +369,14 @@
return usecs;
}
+static void snd_pcm_set_state(struct snd_pcm_substream *substream, int state)
+{
+ snd_pcm_stream_lock_irq(substream);
+ if (substream->runtime->status->state != SNDRV_PCM_STATE_DISCONNECTED)
+ substream->runtime->status->state = state;
+ snd_pcm_stream_unlock_irq(substream);
+}
+
static int snd_pcm_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params)
{
@@ -452,7 +460,7 @@
runtime->boundary *= 2;
snd_pcm_timer_resolution_change(substream);
- runtime->status->state = SNDRV_PCM_STATE_SETUP;
+ snd_pcm_set_state(substream, SNDRV_PCM_STATE_SETUP);
if (pm_qos_request_active(&substream->latency_pm_qos_req))
pm_qos_remove_request(&substream->latency_pm_qos_req);
@@ -464,7 +472,7 @@
/* hardware might be unusable from this time,
so we force application to retry to set
the correct hardware parameter settings */
- runtime->status->state = SNDRV_PCM_STATE_OPEN;
+ snd_pcm_set_state(substream, SNDRV_PCM_STATE_OPEN);
if (substream->ops->hw_free != NULL)
substream->ops->hw_free(substream);
return err;
@@ -512,7 +520,7 @@
return -EBADFD;
if (substream->ops->hw_free)
result = substream->ops->hw_free(substream);
- runtime->status->state = SNDRV_PCM_STATE_OPEN;
+ snd_pcm_set_state(substream, SNDRV_PCM_STATE_OPEN);
pm_qos_remove_request(&substream->latency_pm_qos_req);
return result;
}
@@ -1320,7 +1328,7 @@
{
struct snd_pcm_runtime *runtime = substream->runtime;
runtime->control->appl_ptr = runtime->status->hw_ptr;
- runtime->status->state = SNDRV_PCM_STATE_PREPARED;
+ snd_pcm_set_state(substream, SNDRV_PCM_STATE_PREPARED);
}
static struct action_ops snd_pcm_action_prepare = {
@@ -1510,6 +1518,10 @@
down_read(&snd_pcm_link_rwsem);
snd_pcm_stream_lock_irq(substream);
remove_wait_queue(&to_check->sleep, &wait);
+ if (card->shutdown) {
+ result = -ENODEV;
+ break;
+ }
if (tout == 0) {
if (substream->runtime->status->state == SNDRV_PCM_STATE_SUSPENDED)
result = -ESTRPIPE;
@@ -1634,6 +1646,7 @@
write_unlock_irq(&snd_pcm_link_rwlock);
up_write(&snd_pcm_link_rwsem);
_nolock:
+ snd_card_unref(substream1->pcm->card);
fput_light(file, fput_needed);
if (res < 0)
kfree(group);
@@ -2108,7 +2121,10 @@
return err;
pcm = snd_lookup_minor_data(iminor(inode),
SNDRV_DEVICE_TYPE_PCM_PLAYBACK);
- return snd_pcm_open(file, pcm, SNDRV_PCM_STREAM_PLAYBACK);
+ err = snd_pcm_open(file, pcm, SNDRV_PCM_STREAM_PLAYBACK);
+ if (pcm)
+ snd_card_unref(pcm->card);
+ return err;
}
static int snd_pcm_capture_open(struct inode *inode, struct file *file)
@@ -2119,7 +2135,10 @@
return err;
pcm = snd_lookup_minor_data(iminor(inode),
SNDRV_DEVICE_TYPE_PCM_CAPTURE);
- return snd_pcm_open(file, pcm, SNDRV_PCM_STREAM_CAPTURE);
+ err = snd_pcm_open(file, pcm, SNDRV_PCM_STREAM_CAPTURE);
+ if (pcm)
+ snd_card_unref(pcm->card);
+ return err;
}
static int snd_pcm_open(struct file *file, struct snd_pcm *pcm, int stream)
@@ -2156,6 +2175,10 @@
mutex_unlock(&pcm->open_mutex);
schedule();
mutex_lock(&pcm->open_mutex);
+ if (pcm->card->shutdown) {
+ err = -ENODEV;
+ break;
+ }
if (signal_pending(current)) {
err = -ERESTARTSYS;
break;
diff --git a/sound/core/rawmidi.c b/sound/core/rawmidi.c
index ebf6e49..1bb95ae 100644
--- a/sound/core/rawmidi.c
+++ b/sound/core/rawmidi.c
@@ -379,8 +379,10 @@
if (rmidi == NULL)
return -ENODEV;
- if (!try_module_get(rmidi->card->module))
+ if (!try_module_get(rmidi->card->module)) {
+ snd_card_unref(rmidi->card);
return -ENXIO;
+ }
mutex_lock(&rmidi->open_mutex);
card = rmidi->card;
@@ -422,6 +424,10 @@
mutex_unlock(&rmidi->open_mutex);
schedule();
mutex_lock(&rmidi->open_mutex);
+ if (rmidi->card->shutdown) {
+ err = -ENODEV;
+ break;
+ }
if (signal_pending(current)) {
err = -ERESTARTSYS;
break;
@@ -440,6 +446,7 @@
#endif
file->private_data = rawmidi_file;
mutex_unlock(&rmidi->open_mutex);
+ snd_card_unref(rmidi->card);
return 0;
__error:
@@ -447,6 +454,7 @@
__error_card:
mutex_unlock(&rmidi->open_mutex);
module_put(rmidi->card->module);
+ snd_card_unref(rmidi->card);
return err;
}
@@ -991,6 +999,8 @@
spin_unlock_irq(&runtime->lock);
schedule();
remove_wait_queue(&runtime->sleep, &wait);
+ if (rfile->rmidi->card->shutdown)
+ return -ENODEV;
if (signal_pending(current))
return result > 0 ? result : -ERESTARTSYS;
if (!runtime->avail)
@@ -1234,6 +1244,8 @@
spin_unlock_irq(&runtime->lock);
timeout = schedule_timeout(30 * HZ);
remove_wait_queue(&runtime->sleep, &wait);
+ if (rfile->rmidi->card->shutdown)
+ return -ENODEV;
if (signal_pending(current))
return result > 0 ? result : -ERESTARTSYS;
if (!runtime->avail && !timeout)
@@ -1609,9 +1621,20 @@
static int snd_rawmidi_dev_disconnect(struct snd_device *device)
{
struct snd_rawmidi *rmidi = device->device_data;
+ int dir;
mutex_lock(®ister_mutex);
+ mutex_lock(&rmidi->open_mutex);
+ wake_up(&rmidi->open_wait);
list_del_init(&rmidi->list);
+ for (dir = 0; dir < 2; dir++) {
+ struct snd_rawmidi_substream *s;
+ list_for_each_entry(s, &rmidi->streams[dir].substreams, list) {
+ if (s->runtime)
+ wake_up(&s->runtime->sleep);
+ }
+ }
+
#ifdef CONFIG_SND_OSSEMUL
if (rmidi->ossreg) {
if ((int)rmidi->device == midi_map[rmidi->card->number]) {
@@ -1626,6 +1649,7 @@
}
#endif /* CONFIG_SND_OSSEMUL */
snd_unregister_device(SNDRV_DEVICE_TYPE_RAWMIDI, rmidi->card, rmidi->device);
+ mutex_unlock(&rmidi->open_mutex);
mutex_unlock(®ister_mutex);
return 0;
}
diff --git a/sound/core/sound.c b/sound/core/sound.c
index 6439760..70ccdab 100644
--- a/sound/core/sound.c
+++ b/sound/core/sound.c
@@ -98,6 +98,10 @@
*
* Checks that a minor device with the specified type is registered, and returns
* its user data pointer.
+ *
+ * This function increments the reference counter of the card instance
+ * if an associated instance with the given minor number and type is found.
+ * The caller must call snd_card_unref() appropriately later.
*/
void *snd_lookup_minor_data(unsigned int minor, int type)
{
@@ -108,9 +112,11 @@
return NULL;
mutex_lock(&sound_mutex);
mreg = snd_minors[minor];
- if (mreg && mreg->type == type)
+ if (mreg && mreg->type == type) {
private_data = mreg->private_data;
- else
+ if (private_data && mreg->card_ptr)
+ atomic_inc(&mreg->card_ptr->refcount);
+ } else
private_data = NULL;
mutex_unlock(&sound_mutex);
return private_data;
@@ -275,6 +281,7 @@
preg->device = dev;
preg->f_ops = f_ops;
preg->private_data = private_data;
+ preg->card_ptr = card;
mutex_lock(&sound_mutex);
#ifdef CONFIG_SND_DYNAMIC_MINORS
minor = snd_find_free_minor(type);
diff --git a/sound/core/sound_oss.c b/sound/core/sound_oss.c
index e952833..726a49a 100644
--- a/sound/core/sound_oss.c
+++ b/sound/core/sound_oss.c
@@ -40,6 +40,9 @@
static struct snd_minor *snd_oss_minors[SNDRV_OSS_MINORS];
static DEFINE_MUTEX(sound_oss_mutex);
+/* NOTE: This function increments the refcount of the associated card like
+ * snd_lookup_minor_data(); the caller must call snd_card_unref() appropriately
+ */
void *snd_lookup_oss_minor_data(unsigned int minor, int type)
{
struct snd_minor *mreg;
@@ -49,9 +52,11 @@
return NULL;
mutex_lock(&sound_oss_mutex);
mreg = snd_oss_minors[minor];
- if (mreg && mreg->type == type)
+ if (mreg && mreg->type == type) {
private_data = mreg->private_data;
- else
+ if (private_data && mreg->card_ptr)
+ atomic_inc(&mreg->card_ptr->refcount);
+ } else
private_data = NULL;
mutex_unlock(&sound_oss_mutex);
return private_data;
@@ -123,6 +128,7 @@
preg->device = dev;
preg->f_ops = f_ops;
preg->private_data = private_data;
+ preg->card_ptr = card;
mutex_lock(&sound_oss_mutex);
snd_oss_minors[minor] = preg;
minor_unit = SNDRV_MINOR_OSS_DEVICE(minor);
diff --git a/sound/i2c/other/ak4113.c b/sound/i2c/other/ak4113.c
index ef68d71..e04e750 100644
--- a/sound/i2c/other/ak4113.c
+++ b/sound/i2c/other/ak4113.c
@@ -426,7 +426,7 @@
},
{
.iface = SNDRV_CTL_ELEM_IFACE_PCM,
- .name = "IEC958 Preample Capture Default",
+ .name = "IEC958 Preamble Capture Default",
.access = SNDRV_CTL_ELEM_ACCESS_READ |
SNDRV_CTL_ELEM_ACCESS_VOLATILE,
.info = snd_ak4113_spdif_pinfo,
diff --git a/sound/i2c/other/ak4114.c b/sound/i2c/other/ak4114.c
index 816e7d2..5bf4fca 100644
--- a/sound/i2c/other/ak4114.c
+++ b/sound/i2c/other/ak4114.c
@@ -401,7 +401,7 @@
},
{
.iface = SNDRV_CTL_ELEM_IFACE_PCM,
- .name = "IEC958 Preample Capture Default",
+ .name = "IEC958 Preamble Capture Default",
.access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE,
.info = snd_ak4114_spdif_pinfo,
.get = snd_ak4114_spdif_pget,
diff --git a/sound/i2c/other/ak4117.c b/sound/i2c/other/ak4117.c
index b4b2a51..40e33c9 100644
--- a/sound/i2c/other/ak4117.c
+++ b/sound/i2c/other/ak4117.c
@@ -380,7 +380,7 @@
},
{
.iface = SNDRV_CTL_ELEM_IFACE_PCM,
- .name = "IEC958 Preample Capture Default",
+ .name = "IEC958 Preamble Capture Default",
.access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE,
.info = snd_ak4117_spdif_pinfo,
.get = snd_ak4117_spdif_pget,
diff --git a/sound/isa/opti9xx/miro.c b/sound/isa/opti9xx/miro.c
index 3d1afb6..4a7ff4e 100644
--- a/sound/isa/opti9xx/miro.c
+++ b/sound/isa/opti9xx/miro.c
@@ -1286,7 +1286,6 @@
error = snd_card_miro_aci_detect(card, miro);
if (error < 0) {
- snd_card_free(card);
snd_printk(KERN_ERR "unable to detect aci chip\n");
return -ENODEV;
}
diff --git a/sound/pci/als300.c b/sound/pci/als300.c
index 00f157a..5af3cb6 100644
--- a/sound/pci/als300.c
+++ b/sound/pci/als300.c
@@ -394,6 +394,8 @@
struct snd_als300_substream_data *data = kzalloc(sizeof(*data),
GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
snd_als300_dbgcallenter();
chip->playback_substream = substream;
runtime->hw = snd_als300_playback_hw;
@@ -425,6 +427,8 @@
struct snd_als300_substream_data *data = kzalloc(sizeof(*data),
GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
snd_als300_dbgcallenter();
chip->capture_substream = substream;
runtime->hw = snd_als300_capture_hw;
diff --git a/sound/pci/es1968.c b/sound/pci/es1968.c
index 5d0e568..7266020 100644
--- a/sound/pci/es1968.c
+++ b/sound/pci/es1968.c
@@ -2581,9 +2581,14 @@
struct es1968 *chip = tea->private_data;
unsigned long io = chip->io_port + GPIO_DATA;
u16 val = inw(io);
+ u8 ret;
- return (val & STR_DATA) ? TEA575X_DATA : 0 |
- (val & STR_MOST) ? TEA575X_MOST : 0;
+ ret = 0;
+ if (val & STR_DATA)
+ ret |= TEA575X_DATA;
+ if (val & STR_MOST)
+ ret |= TEA575X_MOST;
+ return ret;
}
static void snd_es1968_tea575x_set_direction(struct snd_tea575x *tea, bool output)
@@ -2655,6 +2660,8 @@
{ TYPE_MAESTRO2E, 0x1179 },
{ TYPE_MAESTRO2E, 0x14c0 }, /* HP omnibook 4150 */
{ TYPE_MAESTRO2E, 0x1558 },
+ { TYPE_MAESTRO2E, 0x125d }, /* a PCI card, e.g. Terratec DMX */
+ { TYPE_MAESTRO2, 0x125d }, /* a PCI card, e.g. SF64-PCE2 */
};
static struct ess_device_list mpu_blacklist[] __devinitdata = {
diff --git a/sound/pci/fm801.c b/sound/pci/fm801.c
index cc2e91d..c5806f8 100644
--- a/sound/pci/fm801.c
+++ b/sound/pci/fm801.c
@@ -767,9 +767,14 @@
struct fm801 *chip = tea->private_data;
unsigned short reg = inw(FM801_REG(chip, GPIO_CTRL));
struct snd_fm801_tea575x_gpio gpio = *get_tea575x_gpio(chip);
+ u8 ret;
- return (reg & FM801_GPIO_GP(gpio.data)) ? TEA575X_DATA : 0 |
- (reg & FM801_GPIO_GP(gpio.most)) ? TEA575X_MOST : 0;
+ ret = 0;
+ if (reg & FM801_GPIO_GP(gpio.data))
+ ret |= TEA575X_DATA;
+ if (reg & FM801_GPIO_GP(gpio.most))
+ ret |= TEA575X_MOST;
+ return ret;
}
static void snd_fm801_tea575x_set_direction(struct snd_tea575x *tea, bool output)
diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index 70d4848..d010de1 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -95,6 +95,7 @@
EXPORT_SYMBOL_HDA(snd_hda_delete_codec_preset);
#ifdef CONFIG_PM
+#define codec_in_pm(codec) ((codec)->in_pm)
static void hda_power_work(struct work_struct *work);
static void hda_keep_power_on(struct hda_codec *codec);
#define hda_codec_is_power_on(codec) ((codec)->power_on)
@@ -104,6 +105,7 @@
bus->ops.pm_notify(bus, power_up);
}
#else
+#define codec_in_pm(codec) 0
static inline void hda_keep_power_on(struct hda_codec *codec) {}
#define hda_codec_is_power_on(codec) 1
#define hda_call_pm_notify(bus, state) {}
@@ -228,7 +230,7 @@
}
mutex_unlock(&bus->cmd_mutex);
snd_hda_power_down(codec);
- if (res && *res == -1 && bus->rirb_error) {
+ if (!codec_in_pm(codec) && res && *res == -1 && bus->rirb_error) {
if (bus->response_reset) {
snd_printd("hda_codec: resetting BUS due to "
"fatal communication error\n");
@@ -238,7 +240,7 @@
goto again;
}
/* clear reset-flag when the communication gets recovered */
- if (!err)
+ if (!err || codec_in_pm(codec))
bus->response_reset = 0;
return err;
}
@@ -3616,6 +3618,8 @@
{
unsigned int state;
+ codec->in_pm = 1;
+
if (codec->patch_ops.suspend)
codec->patch_ops.suspend(codec);
hda_cleanup_all_streams(codec);
@@ -3630,6 +3634,7 @@
codec->power_transition = 0;
codec->power_jiffies = jiffies;
spin_unlock(&codec->power_lock);
+ codec->in_pm = 0;
return state;
}
@@ -3638,6 +3643,8 @@
*/
static void hda_call_codec_resume(struct hda_codec *codec)
{
+ codec->in_pm = 1;
+
/* set as if powered on for avoiding re-entering the resume
* in the resume / power-save sequence
*/
@@ -3656,6 +3663,8 @@
snd_hda_codec_resume_cache(codec);
}
snd_hda_jack_report_sync(codec);
+
+ codec->in_pm = 0;
snd_hda_power_down(codec); /* flag down before returning */
}
#endif /* CONFIG_PM */
diff --git a/sound/pci/hda/hda_codec.h b/sound/pci/hda/hda_codec.h
index 507fe8a..4f4e545 100644
--- a/sound/pci/hda/hda_codec.h
+++ b/sound/pci/hda/hda_codec.h
@@ -869,6 +869,7 @@
unsigned int power_on :1; /* current (global) power-state */
unsigned int d3_stop_clk:1; /* support D3 operation without BCLK */
unsigned int pm_down_notified:1; /* PM notified to controller */
+ unsigned int in_pm:1; /* suspend/resume being performed */
int power_transition; /* power-state in transition */
int power_count; /* current (global) power refcount */
struct delayed_work power_work; /* delayed task for powerdown */
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 72b085ae..f9d870e 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -556,6 +556,12 @@
#define AZX_DCAPS_ALIGN_BUFSIZE (1 << 22) /* buffer size alignment */
#define AZX_DCAPS_4K_BDLE_BOUNDARY (1 << 23) /* BDLE in 4k boundary */
#define AZX_DCAPS_COUNT_LPIB_DELAY (1 << 25) /* Take LPIB as delay */
+#define AZX_DCAPS_PM_RUNTIME (1 << 26) /* runtime PM support */
+
+/* quirks for Intel PCH */
+#define AZX_DCAPS_INTEL_PCH \
+ (AZX_DCAPS_SCH_SNOOP | AZX_DCAPS_BUFSIZE | \
+ AZX_DCAPS_COUNT_LPIB_DELAY | AZX_DCAPS_PM_RUNTIME)
/* quirks for ATI SB / AMD Hudson */
#define AZX_DCAPS_PRESET_ATI_SB \
@@ -2433,6 +2439,9 @@
{
struct azx *chip = bus->private_data;
+ if (!(chip->driver_caps & AZX_DCAPS_PM_RUNTIME))
+ return;
+
if (power_up)
pm_runtime_get_sync(&chip->pci->dev);
else
@@ -2548,7 +2557,8 @@
struct snd_card *card = dev_get_drvdata(dev);
struct azx *chip = card->private_data;
- if (!power_save_controller)
+ if (!power_save_controller ||
+ !(chip->driver_caps & AZX_DCAPS_PM_RUNTIME))
return -EAGAIN;
azx_stop_chip(chip);
@@ -3429,39 +3439,30 @@
static DEFINE_PCI_DEVICE_TABLE(azx_ids) = {
/* CPT */
{ PCI_DEVICE(0x8086, 0x1c20),
- .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_SCH_SNOOP |
- AZX_DCAPS_BUFSIZE | AZX_DCAPS_COUNT_LPIB_DELAY },
+ .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH },
/* PBG */
{ PCI_DEVICE(0x8086, 0x1d20),
- .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_SCH_SNOOP |
- AZX_DCAPS_BUFSIZE},
+ .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH },
/* Panther Point */
{ PCI_DEVICE(0x8086, 0x1e20),
- .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_SCH_SNOOP |
- AZX_DCAPS_BUFSIZE | AZX_DCAPS_COUNT_LPIB_DELAY },
+ .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH },
/* Lynx Point */
{ PCI_DEVICE(0x8086, 0x8c20),
- .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_SCH_SNOOP |
- AZX_DCAPS_BUFSIZE | AZX_DCAPS_COUNT_LPIB_DELAY },
+ .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH },
/* Lynx Point-LP */
{ PCI_DEVICE(0x8086, 0x9c20),
- .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_SCH_SNOOP |
- AZX_DCAPS_BUFSIZE | AZX_DCAPS_COUNT_LPIB_DELAY },
+ .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH },
/* Lynx Point-LP */
{ PCI_DEVICE(0x8086, 0x9c21),
- .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_SCH_SNOOP |
- AZX_DCAPS_BUFSIZE | AZX_DCAPS_COUNT_LPIB_DELAY },
+ .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH },
/* Haswell */
{ PCI_DEVICE(0x8086, 0x0c0c),
- .driver_data = AZX_DRIVER_SCH | AZX_DCAPS_SCH_SNOOP |
- AZX_DCAPS_BUFSIZE | AZX_DCAPS_COUNT_LPIB_DELAY },
+ .driver_data = AZX_DRIVER_SCH | AZX_DCAPS_INTEL_PCH },
{ PCI_DEVICE(0x8086, 0x0d0c),
- .driver_data = AZX_DRIVER_SCH | AZX_DCAPS_SCH_SNOOP |
- AZX_DCAPS_BUFSIZE | AZX_DCAPS_COUNT_LPIB_DELAY },
+ .driver_data = AZX_DRIVER_SCH | AZX_DCAPS_INTEL_PCH },
/* 5 Series/3400 */
{ PCI_DEVICE(0x8086, 0x3b56),
- .driver_data = AZX_DRIVER_SCH | AZX_DCAPS_SCH_SNOOP |
- AZX_DCAPS_BUFSIZE | AZX_DCAPS_COUNT_LPIB_DELAY },
+ .driver_data = AZX_DRIVER_SCH | AZX_DCAPS_INTEL_PCH },
/* SCH */
{ PCI_DEVICE(0x8086, 0x811b),
.driver_data = AZX_DRIVER_SCH | AZX_DCAPS_SCH_SNOOP |
@@ -3563,6 +3564,8 @@
/* Teradici */
{ PCI_DEVICE(0x6549, 0x1200),
.driver_data = AZX_DRIVER_TERA | AZX_DCAPS_NO_64BIT },
+ { PCI_DEVICE(0x6549, 0x2200),
+ .driver_data = AZX_DRIVER_TERA | AZX_DCAPS_NO_64BIT },
/* Creative X-Fi (CA0110-IBG) */
/* CTHDA chips */
{ PCI_DEVICE(0x1102, 0x0010),
diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c
index cdd43ead..1eeba73 100644
--- a/sound/pci/hda/patch_analog.c
+++ b/sound/pci/hda/patch_analog.c
@@ -545,6 +545,7 @@
if (spec->multiout.dig_out_nid) {
info++;
codec->num_pcms++;
+ codec->spdif_status_reset = 1;
info->name = "AD198x Digital";
info->pcm_type = HDA_PCM_TYPE_SPDIF;
info->stream[SNDRV_PCM_STREAM_PLAYBACK] = ad198x_pcm_digital_playback;
diff --git a/sound/pci/hda/patch_cirrus.c b/sound/pci/hda/patch_cirrus.c
index 61a7113..3bcb671 100644
--- a/sound/pci/hda/patch_cirrus.c
+++ b/sound/pci/hda/patch_cirrus.c
@@ -101,8 +101,8 @@
#define CS420X_VENDOR_NID 0x11
#define CS_DIG_OUT1_PIN_NID 0x10
#define CS_DIG_OUT2_PIN_NID 0x15
-#define CS_DMIC1_PIN_NID 0x12
-#define CS_DMIC2_PIN_NID 0x0e
+#define CS_DMIC1_PIN_NID 0x0e
+#define CS_DMIC2_PIN_NID 0x12
/* coef indices */
#define IDX_SPDIF_STAT 0x0000
@@ -466,6 +466,7 @@
memcpy(cfg->speaker_pins, cfg->line_out_pins,
sizeof(cfg->speaker_pins));
cfg->line_outs = 0;
+ memset(cfg->line_out_pins, 0, sizeof(cfg->line_out_pins));
}
return 0;
@@ -1079,14 +1080,18 @@
cs_automic(codec, NULL);
coef = 0x000a; /* ADC1/2 - Digital and Analog Soft Ramp */
+ cs_vendor_coef_set(codec, IDX_ADC_CFG, coef);
+
+ coef = cs_vendor_coef_get(codec, IDX_BEEP_CFG);
if (is_active_pin(codec, CS_DMIC2_PIN_NID))
- coef |= 0x0500; /* DMIC2 2 chan on, GPIO1 off */
+ coef |= 1 << 4; /* DMIC2 2 chan on, GPIO1 off */
if (is_active_pin(codec, CS_DMIC1_PIN_NID))
- coef |= 0x1800; /* DMIC1 2 chan on, GPIO0 off
+ coef |= 1 << 3; /* DMIC1 2 chan on, GPIO0 off
* No effect if SPDIF_OUT2 is
* selected in IDX_SPDIF_CTL.
*/
- cs_vendor_coef_set(codec, IDX_ADC_CFG, coef);
+
+ cs_vendor_coef_set(codec, IDX_BEEP_CFG, coef);
} else {
if (spec->mic_detect)
cs_automic(codec, NULL);
@@ -1107,7 +1112,7 @@
| 0x0400 /* Disable Coefficient Auto increment */
)},
/* Beep */
- {0x11, AC_VERB_SET_COEF_INDEX, IDX_DAC_CFG},
+ {0x11, AC_VERB_SET_COEF_INDEX, IDX_BEEP_CFG},
{0x11, AC_VERB_SET_PROC_COEF, 0x0007}, /* Enable Beep thru DAC1/2/3 */
{} /* terminator */
@@ -1728,8 +1733,7 @@
}
-static struct snd_kcontrol_new cs421x_capture_source = {
-
+static const struct snd_kcontrol_new cs421x_capture_source = {
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Capture Source",
.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
@@ -1946,7 +1950,7 @@
}
#endif
-static struct hda_codec_ops cs421x_patch_ops = {
+static const struct hda_codec_ops cs421x_patch_ops = {
.build_controls = cs421x_build_controls,
.build_pcms = cs_build_pcms,
.init = cs421x_init,
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 48d9d60..ad68d22 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -5407,6 +5407,7 @@
SND_PCI_QUIRK(0x106b, 0x4000, "MacbookPro 5,1", ALC889_FIXUP_IMAC91_VREF),
SND_PCI_QUIRK(0x106b, 0x4100, "Macmini 3,1", ALC889_FIXUP_IMAC91_VREF),
SND_PCI_QUIRK(0x106b, 0x4200, "Mac Pro 5,1", ALC885_FIXUP_MACPRO_GPIO),
+ SND_PCI_QUIRK(0x106b, 0x4300, "iMac 9,1", ALC889_FIXUP_IMAC91_VREF),
SND_PCI_QUIRK(0x106b, 0x4600, "MacbookPro 5,2", ALC889_FIXUP_IMAC91_VREF),
SND_PCI_QUIRK(0x106b, 0x4900, "iMac 9,1 Aluminum", ALC889_FIXUP_IMAC91_VREF),
SND_PCI_QUIRK(0x106b, 0x4a00, "Macbook 5,2", ALC889_FIXUP_IMAC91_VREF),
@@ -5677,6 +5678,7 @@
enum {
ALC268_FIXUP_INV_DMIC,
+ ALC268_FIXUP_HP_EAPD,
};
static const struct alc_fixup alc268_fixups[] = {
@@ -5684,10 +5686,26 @@
.type = ALC_FIXUP_FUNC,
.v.func = alc_fixup_inv_dmic_0x12,
},
+ [ALC268_FIXUP_HP_EAPD] = {
+ .type = ALC_FIXUP_VERBS,
+ .v.verbs = (const struct hda_verb[]) {
+ {0x15, AC_VERB_SET_EAPD_BTLENABLE, 0},
+ {}
+ }
+ },
};
static const struct alc_model_fixup alc268_fixup_models[] = {
{.id = ALC268_FIXUP_INV_DMIC, .name = "inv-dmic"},
+ {.id = ALC268_FIXUP_HP_EAPD, .name = "hp-eapd"},
+ {}
+};
+
+static const struct snd_pci_quirk alc268_fixup_tbl[] = {
+ /* below is codec SSID since multiple Toshiba laptops have the
+ * same PCI SSID 1179:ff00
+ */
+ SND_PCI_QUIRK(0x1179, 0xff06, "Toshiba P200", ALC268_FIXUP_HP_EAPD),
{}
};
@@ -5722,7 +5740,7 @@
spec = codec->spec;
- alc_pick_fixup(codec, alc268_fixup_models, NULL, alc268_fixups);
+ alc_pick_fixup(codec, alc268_fixup_models, alc268_fixup_tbl, alc268_fixups);
alc_apply_fixup(codec, ALC_FIXUP_ACT_PRE_PROBE);
/* automatic parse from the BIOS config */
@@ -5823,7 +5841,7 @@
return alc_parse_auto_config(codec, alc269_ignore, ssids);
}
-static void alc269_toggle_power_output(struct hda_codec *codec, int power_up)
+static void alc269vb_toggle_power_output(struct hda_codec *codec, int power_up)
{
int val = alc_read_coef_idx(codec, 0x04);
if (power_up)
@@ -5840,10 +5858,10 @@
if (spec->codec_variant != ALC269_TYPE_ALC269VB)
return;
- if ((alc_get_coef0(codec) & 0x00ff) == 0x017)
- alc269_toggle_power_output(codec, 0);
- if ((alc_get_coef0(codec) & 0x00ff) == 0x018) {
- alc269_toggle_power_output(codec, 0);
+ if (spec->codec_variant == ALC269_TYPE_ALC269VB)
+ alc269vb_toggle_power_output(codec, 0);
+ if (spec->codec_variant == ALC269_TYPE_ALC269VB &&
+ (alc_get_coef0(codec) & 0x00ff) == 0x018) {
msleep(150);
}
}
@@ -5853,24 +5871,22 @@
{
struct alc_spec *spec = codec->spec;
- if (spec->codec_variant == ALC269_TYPE_ALC269VB ||
+ if (spec->codec_variant == ALC269_TYPE_ALC269VB)
+ alc269vb_toggle_power_output(codec, 0);
+ if (spec->codec_variant == ALC269_TYPE_ALC269VB &&
(alc_get_coef0(codec) & 0x00ff) == 0x018) {
- alc269_toggle_power_output(codec, 0);
msleep(150);
}
codec->patch_ops.init(codec);
- if (spec->codec_variant == ALC269_TYPE_ALC269VB ||
+ if (spec->codec_variant == ALC269_TYPE_ALC269VB)
+ alc269vb_toggle_power_output(codec, 1);
+ if (spec->codec_variant == ALC269_TYPE_ALC269VB &&
(alc_get_coef0(codec) & 0x00ff) == 0x017) {
- alc269_toggle_power_output(codec, 1);
msleep(200);
}
- if (spec->codec_variant == ALC269_TYPE_ALC269VB ||
- (alc_get_coef0(codec) & 0x00ff) == 0x018)
- alc269_toggle_power_output(codec, 1);
-
snd_hda_codec_resume_amp(codec);
snd_hda_codec_resume_cache(codec);
hda_call_check_power_status(codec, 0x01);
@@ -6188,6 +6204,7 @@
SND_PCI_QUIRK(0x17aa, 0x21e9, "Thinkpad Edge 15", ALC269_FIXUP_SKU_IGNORE),
SND_PCI_QUIRK(0x17aa, 0x21f6, "Thinkpad T530", ALC269_FIXUP_LENOVO_DOCK),
SND_PCI_QUIRK(0x17aa, 0x21fa, "Thinkpad X230", ALC269_FIXUP_LENOVO_DOCK),
+ SND_PCI_QUIRK(0x17aa, 0x21f3, "Thinkpad T430", ALC269_FIXUP_LENOVO_DOCK),
SND_PCI_QUIRK(0x17aa, 0x21fb, "Thinkpad T430s", ALC269_FIXUP_LENOVO_DOCK),
SND_PCI_QUIRK(0x17aa, 0x2203, "Thinkpad X230 Tablet", ALC269_FIXUP_LENOVO_DOCK),
SND_PCI_QUIRK(0x17aa, 0x3bf8, "Quanta FL1", ALC269_FIXUP_PCM_44K),
@@ -7048,6 +7065,7 @@
{ .id = 0x10ec0282, .name = "ALC282", .patch = patch_alc269 },
{ .id = 0x10ec0283, .name = "ALC283", .patch = patch_alc269 },
{ .id = 0x10ec0290, .name = "ALC290", .patch = patch_alc269 },
+ { .id = 0x10ec0292, .name = "ALC292", .patch = patch_alc269 },
{ .id = 0x10ec0861, .rev = 0x100340, .name = "ALC660",
.patch = patch_alc861 },
{ .id = 0x10ec0660, .name = "ALC660-VD", .patch = patch_alc861vd },
@@ -7061,6 +7079,7 @@
.patch = patch_alc662 },
{ .id = 0x10ec0663, .name = "ALC663", .patch = patch_alc662 },
{ .id = 0x10ec0665, .name = "ALC665", .patch = patch_alc662 },
+ { .id = 0x10ec0668, .name = "ALC668", .patch = patch_alc662 },
{ .id = 0x10ec0670, .name = "ALC670", .patch = patch_alc662 },
{ .id = 0x10ec0680, .name = "ALC680", .patch = patch_alc680 },
{ .id = 0x10ec0880, .name = "ALC880", .patch = patch_alc880 },
@@ -7078,6 +7097,7 @@
{ .id = 0x10ec0889, .name = "ALC889", .patch = patch_alc882 },
{ .id = 0x10ec0892, .name = "ALC892", .patch = patch_alc662 },
{ .id = 0x10ec0899, .name = "ALC898", .patch = patch_alc882 },
+ { .id = 0x10ec0900, .name = "ALC1150", .patch = patch_alc882 },
{} /* terminator */
};
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 770013f..9ba8af0 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -1763,6 +1763,8 @@
"HP", STAC_HP_ZEPHYR),
SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x3660,
"HP Mini", STAC_92HD83XXX_HP_LED),
+ SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x144E,
+ "HP Pavilion dv5", STAC_92HD83XXX_HP_INV_LED),
{} /* terminator */
};
diff --git a/sound/pci/hda/patch_via.c b/sound/pci/hda/patch_via.c
index 72a2f60..019e1a0 100644
--- a/sound/pci/hda/patch_via.c
+++ b/sound/pci/hda/patch_via.c
@@ -1809,11 +1809,11 @@
{
struct via_spec *spec = codec->spec;
const struct auto_pin_cfg *cfg = &spec->autocfg;
- int i, dac_num;
+ int i;
hda_nid_t nid;
+ spec->multiout.num_dacs = 0;
spec->multiout.dac_nids = spec->private_dac_nids;
- dac_num = 0;
for (i = 0; i < cfg->line_outs; i++) {
hda_nid_t dac = 0;
nid = cfg->line_out_pins[i];
@@ -1824,16 +1824,13 @@
if (!i && parse_output_path(codec, nid, dac, 1,
&spec->out_mix_path))
dac = spec->out_mix_path.path[0];
- if (dac) {
- spec->private_dac_nids[i] = dac;
- dac_num++;
- }
+ if (dac)
+ spec->private_dac_nids[spec->multiout.num_dacs++] = dac;
}
if (!spec->out_path[0].depth && spec->out_mix_path.depth) {
spec->out_path[0] = spec->out_mix_path;
spec->out_mix_path.depth = 0;
}
- spec->multiout.num_dacs = dac_num;
return 0;
}
@@ -3628,6 +3625,7 @@
*/
enum {
VIA_FIXUP_INTMIC_BOOST,
+ VIA_FIXUP_ASUS_G75,
};
static void via_fixup_intmic_boost(struct hda_codec *codec,
@@ -3642,13 +3640,35 @@
.type = HDA_FIXUP_FUNC,
.v.func = via_fixup_intmic_boost,
},
+ [VIA_FIXUP_ASUS_G75] = {
+ .type = HDA_FIXUP_PINS,
+ .v.pins = (const struct hda_pintbl[]) {
+ /* set 0x24 and 0x33 as speakers */
+ { 0x24, 0x991301f0 },
+ { 0x33, 0x991301f1 }, /* subwoofer */
+ { }
+ }
+ },
};
static const struct snd_pci_quirk vt2002p_fixups[] = {
+ SND_PCI_QUIRK(0x1043, 0x1487, "Asus G75", VIA_FIXUP_ASUS_G75),
SND_PCI_QUIRK(0x1043, 0x8532, "Asus X202E", VIA_FIXUP_INTMIC_BOOST),
{}
};
+/* NIDs 0x24 and 0x33 on VT1802 have connections to non-existing NID 0x3e
+ * Replace this with mixer NID 0x1c
+ */
+static void fix_vt1802_connections(struct hda_codec *codec)
+{
+ static hda_nid_t conn_24[] = { 0x14, 0x1c };
+ static hda_nid_t conn_33[] = { 0x1c };
+
+ snd_hda_override_conn_list(codec, 0x24, ARRAY_SIZE(conn_24), conn_24);
+ snd_hda_override_conn_list(codec, 0x33, ARRAY_SIZE(conn_33), conn_33);
+}
+
/* patch for vt2002P */
static int patch_vt2002P(struct hda_codec *codec)
{
@@ -3663,6 +3683,8 @@
spec->aa_mix_nid = 0x21;
override_mic_boost(codec, 0x2b, 0, 3, 40);
override_mic_boost(codec, 0x29, 0, 3, 40);
+ if (spec->codec_type == VT1802)
+ fix_vt1802_connections(codec);
add_secret_dac_path(codec);
snd_hda_pick_fixup(codec, NULL, vt2002p_fixups, via_fixups);
diff --git a/sound/pci/ice1712/ice1724.c b/sound/pci/ice1712/ice1724.c
index 3050a52..245d874 100644
--- a/sound/pci/ice1712/ice1724.c
+++ b/sound/pci/ice1712/ice1724.c
@@ -2859,7 +2859,12 @@
ice->set_spdif_clock(ice, 0);
} else {
/* internal on-card clock */
- snd_vt1724_set_pro_rate(ice, ice->pro_rate_default, 1);
+ int rate;
+ if (ice->cur_rate)
+ rate = ice->cur_rate;
+ else
+ rate = ice->pro_rate_default;
+ snd_vt1724_set_pro_rate(ice, rate, 1);
}
update_spdif_bits(ice, ice->pm_saved_spdif_ctrl);
diff --git a/sound/pci/rme9652/hdspm.c b/sound/pci/rme9652/hdspm.c
index b12308b..748e36c 100644
--- a/sound/pci/rme9652/hdspm.c
+++ b/sound/pci/rme9652/hdspm.c
@@ -971,6 +971,7 @@
static int hdspm_update_simple_mixer_controls(struct hdspm *hdspm);
static int hdspm_autosync_ref(struct hdspm *hdspm);
static int snd_hdspm_set_defaults(struct hdspm *hdspm);
+static int hdspm_system_clock_mode(struct hdspm *hdspm);
static void hdspm_set_sgbuf(struct hdspm *hdspm,
struct snd_pcm_substream *substream,
unsigned int reg, int channels);
@@ -1989,10 +1990,14 @@
rate = hdspm_calc_dds_value(hdspm, period);
if (rate > 207000) {
- /* Unreasonable high sample rate as seen on PCI MADI cards.
- * Use the cached value instead.
- */
- rate = hdspm->system_sample_rate;
+ /* Unreasonable high sample rate as seen on PCI MADI cards. */
+ if (0 == hdspm_system_clock_mode(hdspm)) {
+ /* master mode, return internal sample rate */
+ rate = hdspm->system_sample_rate;
+ } else {
+ /* slave mode, return external sample rate */
+ rate = hdspm_external_sample_rate(hdspm);
+ }
}
return rate;
@@ -2000,12 +2005,14 @@
#define HDSPM_SYSTEM_SAMPLE_RATE(xname, xindex) \
-{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
- .name = xname, \
- .index = xindex, \
- .access = SNDRV_CTL_ELEM_ACCESS_READ, \
- .info = snd_hdspm_info_system_sample_rate, \
- .get = snd_hdspm_get_system_sample_rate \
+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
+ .name = xname, \
+ .index = xindex, \
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE |\
+ SNDRV_CTL_ELEM_ACCESS_VOLATILE, \
+ .info = snd_hdspm_info_system_sample_rate, \
+ .put = snd_hdspm_put_system_sample_rate, \
+ .get = snd_hdspm_get_system_sample_rate \
}
static int snd_hdspm_info_system_sample_rate(struct snd_kcontrol *kcontrol,
@@ -2030,6 +2037,16 @@
return 0;
}
+static int snd_hdspm_put_system_sample_rate(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *
+ ucontrol)
+{
+ struct hdspm *hdspm = snd_kcontrol_chip(kcontrol);
+
+ hdspm_set_dds_value(hdspm, ucontrol->value.enumerated.item[0]);
+ return 0;
+}
+
/**
* Returns the WordClock sample rate class for the given card.
@@ -2163,6 +2180,7 @@
hdspm_get_s1_sample_rate(hdspm,
kcontrol->private_value-1);
}
+ break;
case AIO:
switch (kcontrol->private_value) {
@@ -2183,6 +2201,7 @@
hdspm_get_s1_sample_rate(hdspm,
ucontrol->id.index-1);
}
+ break;
case AES32:
@@ -2204,8 +2223,23 @@
hdspm_get_s1_sample_rate(hdspm,
kcontrol->private_value-1);
break;
-
}
+ break;
+
+ case MADI:
+ case MADIface:
+ {
+ int rate = hdspm_external_sample_rate(hdspm);
+ int i, selected_rate = 0;
+ for (i = 1; i < 10; i++)
+ if (HDSPM_bit2freq(i) == rate) {
+ selected_rate = i;
+ break;
+ }
+ ucontrol->value.enumerated.item[0] = selected_rate;
+ }
+ break;
+
default:
break;
}
@@ -2430,7 +2464,7 @@
#define HDSPM_PREF_SYNC_REF(xname, xindex) \
-{.iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
.name = xname, \
.index = xindex, \
.access = SNDRV_CTL_ELEM_ACCESS_READWRITE |\
@@ -2766,12 +2800,12 @@
#define HDSPM_AUTOSYNC_REF(xname, xindex) \
-{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
- .name = xname, \
- .index = xindex, \
- .access = SNDRV_CTL_ELEM_ACCESS_READ, \
- .info = snd_hdspm_info_autosync_ref, \
- .get = snd_hdspm_get_autosync_ref, \
+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
+ .name = xname, \
+ .index = xindex, \
+ .access = SNDRV_CTL_ELEM_ACCESS_READ, \
+ .info = snd_hdspm_info_autosync_ref, \
+ .get = snd_hdspm_get_autosync_ref, \
}
static int hdspm_autosync_ref(struct hdspm *hdspm)
@@ -2855,12 +2889,12 @@
#define HDSPM_LINE_OUT(xname, xindex) \
-{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
- .name = xname, \
- .index = xindex, \
- .info = snd_hdspm_info_line_out, \
- .get = snd_hdspm_get_line_out, \
- .put = snd_hdspm_put_line_out \
+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
+ .name = xname, \
+ .index = xindex, \
+ .info = snd_hdspm_info_line_out, \
+ .get = snd_hdspm_get_line_out, \
+ .put = snd_hdspm_put_line_out \
}
static int hdspm_line_out(struct hdspm * hdspm)
@@ -2912,12 +2946,12 @@
#define HDSPM_TX_64(xname, xindex) \
-{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
- .name = xname, \
- .index = xindex, \
- .info = snd_hdspm_info_tx_64, \
- .get = snd_hdspm_get_tx_64, \
- .put = snd_hdspm_put_tx_64 \
+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
+ .name = xname, \
+ .index = xindex, \
+ .info = snd_hdspm_info_tx_64, \
+ .get = snd_hdspm_get_tx_64, \
+ .put = snd_hdspm_put_tx_64 \
}
static int hdspm_tx_64(struct hdspm * hdspm)
@@ -2968,12 +3002,12 @@
#define HDSPM_C_TMS(xname, xindex) \
-{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
- .name = xname, \
- .index = xindex, \
- .info = snd_hdspm_info_c_tms, \
- .get = snd_hdspm_get_c_tms, \
- .put = snd_hdspm_put_c_tms \
+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
+ .name = xname, \
+ .index = xindex, \
+ .info = snd_hdspm_info_c_tms, \
+ .get = snd_hdspm_get_c_tms, \
+ .put = snd_hdspm_put_c_tms \
}
static int hdspm_c_tms(struct hdspm * hdspm)
@@ -3024,12 +3058,12 @@
#define HDSPM_SAFE_MODE(xname, xindex) \
-{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
- .name = xname, \
- .index = xindex, \
- .info = snd_hdspm_info_safe_mode, \
- .get = snd_hdspm_get_safe_mode, \
- .put = snd_hdspm_put_safe_mode \
+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
+ .name = xname, \
+ .index = xindex, \
+ .info = snd_hdspm_info_safe_mode, \
+ .get = snd_hdspm_get_safe_mode, \
+ .put = snd_hdspm_put_safe_mode \
}
static int hdspm_safe_mode(struct hdspm * hdspm)
@@ -3080,12 +3114,12 @@
#define HDSPM_EMPHASIS(xname, xindex) \
-{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
- .name = xname, \
- .index = xindex, \
- .info = snd_hdspm_info_emphasis, \
- .get = snd_hdspm_get_emphasis, \
- .put = snd_hdspm_put_emphasis \
+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
+ .name = xname, \
+ .index = xindex, \
+ .info = snd_hdspm_info_emphasis, \
+ .get = snd_hdspm_get_emphasis, \
+ .put = snd_hdspm_put_emphasis \
}
static int hdspm_emphasis(struct hdspm * hdspm)
@@ -3136,12 +3170,12 @@
#define HDSPM_DOLBY(xname, xindex) \
-{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
- .name = xname, \
- .index = xindex, \
- .info = snd_hdspm_info_dolby, \
- .get = snd_hdspm_get_dolby, \
- .put = snd_hdspm_put_dolby \
+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
+ .name = xname, \
+ .index = xindex, \
+ .info = snd_hdspm_info_dolby, \
+ .get = snd_hdspm_get_dolby, \
+ .put = snd_hdspm_put_dolby \
}
static int hdspm_dolby(struct hdspm * hdspm)
@@ -3192,12 +3226,12 @@
#define HDSPM_PROFESSIONAL(xname, xindex) \
-{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
- .name = xname, \
- .index = xindex, \
- .info = snd_hdspm_info_professional, \
- .get = snd_hdspm_get_professional, \
- .put = snd_hdspm_put_professional \
+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
+ .name = xname, \
+ .index = xindex, \
+ .info = snd_hdspm_info_professional, \
+ .get = snd_hdspm_get_professional, \
+ .put = snd_hdspm_put_professional \
}
static int hdspm_professional(struct hdspm * hdspm)
@@ -3247,12 +3281,12 @@
}
#define HDSPM_INPUT_SELECT(xname, xindex) \
-{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
- .name = xname, \
- .index = xindex, \
- .info = snd_hdspm_info_input_select, \
- .get = snd_hdspm_get_input_select, \
- .put = snd_hdspm_put_input_select \
+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
+ .name = xname, \
+ .index = xindex, \
+ .info = snd_hdspm_info_input_select, \
+ .get = snd_hdspm_get_input_select, \
+ .put = snd_hdspm_put_input_select \
}
static int hdspm_input_select(struct hdspm * hdspm)
@@ -3319,12 +3353,12 @@
#define HDSPM_DS_WIRE(xname, xindex) \
-{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
- .name = xname, \
- .index = xindex, \
- .info = snd_hdspm_info_ds_wire, \
- .get = snd_hdspm_get_ds_wire, \
- .put = snd_hdspm_put_ds_wire \
+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
+ .name = xname, \
+ .index = xindex, \
+ .info = snd_hdspm_info_ds_wire, \
+ .get = snd_hdspm_get_ds_wire, \
+ .put = snd_hdspm_put_ds_wire \
}
static int hdspm_ds_wire(struct hdspm * hdspm)
@@ -3391,12 +3425,12 @@
#define HDSPM_QS_WIRE(xname, xindex) \
-{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
- .name = xname, \
- .index = xindex, \
- .info = snd_hdspm_info_qs_wire, \
- .get = snd_hdspm_get_qs_wire, \
- .put = snd_hdspm_put_qs_wire \
+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
+ .name = xname, \
+ .index = xindex, \
+ .info = snd_hdspm_info_qs_wire, \
+ .get = snd_hdspm_get_qs_wire, \
+ .put = snd_hdspm_put_qs_wire \
}
static int hdspm_qs_wire(struct hdspm * hdspm)
@@ -3563,15 +3597,15 @@
}
#define HDSPM_MIXER(xname, xindex) \
-{ .iface = SNDRV_CTL_ELEM_IFACE_HWDEP, \
- .name = xname, \
- .index = xindex, \
- .device = 0, \
- .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | \
- SNDRV_CTL_ELEM_ACCESS_VOLATILE, \
- .info = snd_hdspm_info_mixer, \
- .get = snd_hdspm_get_mixer, \
- .put = snd_hdspm_put_mixer \
+{ .iface = SNDRV_CTL_ELEM_IFACE_HWDEP, \
+ .name = xname, \
+ .index = xindex, \
+ .device = 0, \
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | \
+ SNDRV_CTL_ELEM_ACCESS_VOLATILE, \
+ .info = snd_hdspm_info_mixer, \
+ .get = snd_hdspm_get_mixer, \
+ .put = snd_hdspm_put_mixer \
}
static int snd_hdspm_info_mixer(struct snd_kcontrol *kcontrol,
@@ -3670,12 +3704,12 @@
*/
#define HDSPM_PLAYBACK_MIXER \
-{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
- .access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_WRITE | \
- SNDRV_CTL_ELEM_ACCESS_VOLATILE, \
- .info = snd_hdspm_info_playback_mixer, \
- .get = snd_hdspm_get_playback_mixer, \
- .put = snd_hdspm_put_playback_mixer \
+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
+ .access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_WRITE | \
+ SNDRV_CTL_ELEM_ACCESS_VOLATILE, \
+ .info = snd_hdspm_info_playback_mixer, \
+ .get = snd_hdspm_get_playback_mixer, \
+ .put = snd_hdspm_put_playback_mixer \
}
static int snd_hdspm_info_playback_mixer(struct snd_kcontrol *kcontrol,
@@ -3851,12 +3885,17 @@
break;
case MADI:
- case AES32:
- status = hdspm_read(hdspm, HDSPM_statusRegister2);
+ status = hdspm_read(hdspm, HDSPM_statusRegister);
lock = (status & HDSPM_syncInLock) ? 1 : 0;
sync = (status & HDSPM_syncInSync) ? 1 : 0;
break;
+ case AES32:
+ status = hdspm_read(hdspm, HDSPM_statusRegister2);
+ lock = (status & 0x100000) ? 1 : 0;
+ sync = (status & 0x200000) ? 1 : 0;
+ break;
+
case MADIface:
break;
}
@@ -3940,8 +3979,10 @@
case 8: /* SYNC IN */
val = hdspm_sync_in_sync_check(hdspm); break;
default:
- val = hdspm_s1_sync_check(hdspm, ucontrol->id.index-1);
+ val = hdspm_s1_sync_check(hdspm,
+ kcontrol->private_value-1);
}
+ break;
case AIO:
switch (kcontrol->private_value) {
@@ -3954,6 +3995,7 @@
default:
val = hdspm_s1_sync_check(hdspm, ucontrol->id.index-1);
}
+ break;
case MADI:
switch (kcontrol->private_value) {
@@ -3966,6 +4008,7 @@
case 3: /* SYNC_IN */
val = hdspm_sync_in_sync_check(hdspm); break;
}
+ break;
case MADIface:
val = hdspm_madi_sync_check(hdspm); /* MADI */
@@ -3983,6 +4026,7 @@
val = hdspm_aes_sync_check(hdspm,
kcontrol->private_value-1);
}
+ break;
}
@@ -4427,9 +4471,10 @@
HDSPM_PREF_SYNC_REF("Preferred Sync Reference", 0),
HDSPM_AUTOSYNC_REF("AutoSync Reference", 0),
HDSPM_SYSTEM_SAMPLE_RATE("System Sample Rate", 0),
+ HDSPM_AUTOSYNC_SAMPLE_RATE("External Rate", 0),
HDSPM_SYNC_CHECK("WC SyncCheck", 0),
HDSPM_SYNC_CHECK("MADI SyncCheck", 1),
- HDSPM_SYNC_CHECK("TCO SyncCHeck", 2),
+ HDSPM_SYNC_CHECK("TCO SyncCheck", 2),
HDSPM_SYNC_CHECK("SYNC IN SyncCheck", 3),
HDSPM_LINE_OUT("Line Out", 0),
HDSPM_TX_64("TX 64 channels mode", 0),
@@ -4855,7 +4900,7 @@
insel = "Coaxial";
break;
default:
- insel = "Unkown";
+ insel = "Unknown";
}
snd_iprintf(buffer,
diff --git a/sound/soc/codecs/arizona.c b/sound/soc/codecs/arizona.c
index c03b65a..054967d 100644
--- a/sound/soc/codecs/arizona.c
+++ b/sound/soc/codecs/arizona.c
@@ -268,7 +268,7 @@
static unsigned int arizona_sysclk_48k_rates[] = {
6144000,
12288000,
- 22579200,
+ 24576000,
49152000,
73728000,
98304000,
@@ -278,7 +278,7 @@
static unsigned int arizona_sysclk_44k1_rates[] = {
5644800,
11289600,
- 24576000,
+ 22579200,
45158400,
67737600,
90316800,
diff --git a/sound/soc/codecs/cs4271.c b/sound/soc/codecs/cs4271.c
index f994af3..e3f0a7f3 100644
--- a/sound/soc/codecs/cs4271.c
+++ b/sound/soc/codecs/cs4271.c
@@ -485,7 +485,7 @@
gpio_nreset = cs4271plat->gpio_nreset;
if (gpio_nreset >= 0)
- if (gpio_request(gpio_nreset, "CS4271 Reset"))
+ if (devm_gpio_request(codec->dev, gpio_nreset, "CS4271 Reset"))
gpio_nreset = -EINVAL;
if (gpio_nreset >= 0) {
/* Reset codec */
@@ -535,15 +535,10 @@
static int cs4271_remove(struct snd_soc_codec *codec)
{
struct cs4271_private *cs4271 = snd_soc_codec_get_drvdata(codec);
- int gpio_nreset;
- gpio_nreset = cs4271->gpio_nreset;
-
- if (gpio_is_valid(gpio_nreset)) {
+ if (gpio_is_valid(cs4271->gpio_nreset))
/* Set codec to the reset state */
- gpio_set_value(gpio_nreset, 0);
- gpio_free(gpio_nreset);
- }
+ gpio_set_value(cs4271->gpio_nreset, 0);
return 0;
};
diff --git a/sound/soc/codecs/cs42l52.c b/sound/soc/codecs/cs42l52.c
index 6159929..97a8105 100644
--- a/sound/soc/codecs/cs42l52.c
+++ b/sound/soc/codecs/cs42l52.c
@@ -763,7 +763,7 @@
if ((freq >= CS42L52_MIN_CLK) && (freq <= CS42L52_MAX_CLK)) {
cs42l52->sysclk = freq;
} else {
- dev_err(codec->dev, "Invalid freq paramter\n");
+ dev_err(codec->dev, "Invalid freq parameter\n");
return -EINVAL;
}
return 0;
@@ -773,7 +773,6 @@
{
struct snd_soc_codec *codec = codec_dai->codec;
struct cs42l52_private *cs42l52 = snd_soc_codec_get_drvdata(codec);
- int ret = 0;
u8 iface = 0;
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
@@ -822,7 +821,7 @@
case SND_SOC_DAIFMT_NB_IF:
break;
default:
- ret = -EINVAL;
+ return -EINVAL;
}
cs42l52->config.format = iface;
snd_soc_write(codec, CS42L52_IFACE_CTL1, cs42l52->config.format);
diff --git a/sound/soc/codecs/wm5102.c b/sound/soc/codecs/wm5102.c
index 1722b58..7394e73 100644
--- a/sound/soc/codecs/wm5102.c
+++ b/sound/soc/codecs/wm5102.c
@@ -42,6 +42,556 @@
static DECLARE_TLV_DB_SCALE(digital_tlv, -6400, 50, 0);
static DECLARE_TLV_DB_SCALE(noise_tlv, 0, 600, 0);
+static const struct reg_default wm5102_sysclk_reva_patch[] = {
+ { 0x3000, 0x2225 },
+ { 0x3001, 0x3a03 },
+ { 0x3002, 0x0225 },
+ { 0x3003, 0x0801 },
+ { 0x3004, 0x6249 },
+ { 0x3005, 0x0c04 },
+ { 0x3006, 0x0225 },
+ { 0x3007, 0x5901 },
+ { 0x3008, 0xe249 },
+ { 0x3009, 0x030d },
+ { 0x300a, 0x0249 },
+ { 0x300b, 0x2c01 },
+ { 0x300c, 0xe249 },
+ { 0x300d, 0x4342 },
+ { 0x300e, 0xe249 },
+ { 0x300f, 0x73c0 },
+ { 0x3010, 0x4249 },
+ { 0x3011, 0x0c00 },
+ { 0x3012, 0x0225 },
+ { 0x3013, 0x1f01 },
+ { 0x3014, 0x0225 },
+ { 0x3015, 0x1e01 },
+ { 0x3016, 0x0225 },
+ { 0x3017, 0xfa00 },
+ { 0x3018, 0x0000 },
+ { 0x3019, 0xf000 },
+ { 0x301a, 0x0000 },
+ { 0x301b, 0xf000 },
+ { 0x301c, 0x0000 },
+ { 0x301d, 0xf000 },
+ { 0x301e, 0x0000 },
+ { 0x301f, 0xf000 },
+ { 0x3020, 0x0000 },
+ { 0x3021, 0xf000 },
+ { 0x3022, 0x0000 },
+ { 0x3023, 0xf000 },
+ { 0x3024, 0x0000 },
+ { 0x3025, 0xf000 },
+ { 0x3026, 0x0000 },
+ { 0x3027, 0xf000 },
+ { 0x3028, 0x0000 },
+ { 0x3029, 0xf000 },
+ { 0x302a, 0x0000 },
+ { 0x302b, 0xf000 },
+ { 0x302c, 0x0000 },
+ { 0x302d, 0xf000 },
+ { 0x302e, 0x0000 },
+ { 0x302f, 0xf000 },
+ { 0x3030, 0x0225 },
+ { 0x3031, 0x1a01 },
+ { 0x3032, 0x0225 },
+ { 0x3033, 0x1e00 },
+ { 0x3034, 0x0225 },
+ { 0x3035, 0x1f00 },
+ { 0x3036, 0x6225 },
+ { 0x3037, 0xf800 },
+ { 0x3038, 0x0000 },
+ { 0x3039, 0xf000 },
+ { 0x303a, 0x0000 },
+ { 0x303b, 0xf000 },
+ { 0x303c, 0x0000 },
+ { 0x303d, 0xf000 },
+ { 0x303e, 0x0000 },
+ { 0x303f, 0xf000 },
+ { 0x3040, 0x2226 },
+ { 0x3041, 0x3a03 },
+ { 0x3042, 0x0226 },
+ { 0x3043, 0x0801 },
+ { 0x3044, 0x6249 },
+ { 0x3045, 0x0c06 },
+ { 0x3046, 0x0226 },
+ { 0x3047, 0x5901 },
+ { 0x3048, 0xe249 },
+ { 0x3049, 0x030d },
+ { 0x304a, 0x0249 },
+ { 0x304b, 0x2c01 },
+ { 0x304c, 0xe249 },
+ { 0x304d, 0x4342 },
+ { 0x304e, 0xe249 },
+ { 0x304f, 0x73c0 },
+ { 0x3050, 0x4249 },
+ { 0x3051, 0x0c00 },
+ { 0x3052, 0x0226 },
+ { 0x3053, 0x1f01 },
+ { 0x3054, 0x0226 },
+ { 0x3055, 0x1e01 },
+ { 0x3056, 0x0226 },
+ { 0x3057, 0xfa00 },
+ { 0x3058, 0x0000 },
+ { 0x3059, 0xf000 },
+ { 0x305a, 0x0000 },
+ { 0x305b, 0xf000 },
+ { 0x305c, 0x0000 },
+ { 0x305d, 0xf000 },
+ { 0x305e, 0x0000 },
+ { 0x305f, 0xf000 },
+ { 0x3060, 0x0000 },
+ { 0x3061, 0xf000 },
+ { 0x3062, 0x0000 },
+ { 0x3063, 0xf000 },
+ { 0x3064, 0x0000 },
+ { 0x3065, 0xf000 },
+ { 0x3066, 0x0000 },
+ { 0x3067, 0xf000 },
+ { 0x3068, 0x0000 },
+ { 0x3069, 0xf000 },
+ { 0x306a, 0x0000 },
+ { 0x306b, 0xf000 },
+ { 0x306c, 0x0000 },
+ { 0x306d, 0xf000 },
+ { 0x306e, 0x0000 },
+ { 0x306f, 0xf000 },
+ { 0x3070, 0x0226 },
+ { 0x3071, 0x1a01 },
+ { 0x3072, 0x0226 },
+ { 0x3073, 0x1e00 },
+ { 0x3074, 0x0226 },
+ { 0x3075, 0x1f00 },
+ { 0x3076, 0x6226 },
+ { 0x3077, 0xf800 },
+ { 0x3078, 0x0000 },
+ { 0x3079, 0xf000 },
+ { 0x307a, 0x0000 },
+ { 0x307b, 0xf000 },
+ { 0x307c, 0x0000 },
+ { 0x307d, 0xf000 },
+ { 0x307e, 0x0000 },
+ { 0x307f, 0xf000 },
+ { 0x3080, 0x2227 },
+ { 0x3081, 0x3a03 },
+ { 0x3082, 0x0227 },
+ { 0x3083, 0x0801 },
+ { 0x3084, 0x6255 },
+ { 0x3085, 0x0c04 },
+ { 0x3086, 0x0227 },
+ { 0x3087, 0x5901 },
+ { 0x3088, 0xe255 },
+ { 0x3089, 0x030d },
+ { 0x308a, 0x0255 },
+ { 0x308b, 0x2c01 },
+ { 0x308c, 0xe255 },
+ { 0x308d, 0x4342 },
+ { 0x308e, 0xe255 },
+ { 0x308f, 0x73c0 },
+ { 0x3090, 0x4255 },
+ { 0x3091, 0x0c00 },
+ { 0x3092, 0x0227 },
+ { 0x3093, 0x1f01 },
+ { 0x3094, 0x0227 },
+ { 0x3095, 0x1e01 },
+ { 0x3096, 0x0227 },
+ { 0x3097, 0xfa00 },
+ { 0x3098, 0x0000 },
+ { 0x3099, 0xf000 },
+ { 0x309a, 0x0000 },
+ { 0x309b, 0xf000 },
+ { 0x309c, 0x0000 },
+ { 0x309d, 0xf000 },
+ { 0x309e, 0x0000 },
+ { 0x309f, 0xf000 },
+ { 0x30a0, 0x0000 },
+ { 0x30a1, 0xf000 },
+ { 0x30a2, 0x0000 },
+ { 0x30a3, 0xf000 },
+ { 0x30a4, 0x0000 },
+ { 0x30a5, 0xf000 },
+ { 0x30a6, 0x0000 },
+ { 0x30a7, 0xf000 },
+ { 0x30a8, 0x0000 },
+ { 0x30a9, 0xf000 },
+ { 0x30aa, 0x0000 },
+ { 0x30ab, 0xf000 },
+ { 0x30ac, 0x0000 },
+ { 0x30ad, 0xf000 },
+ { 0x30ae, 0x0000 },
+ { 0x30af, 0xf000 },
+ { 0x30b0, 0x0227 },
+ { 0x30b1, 0x1a01 },
+ { 0x30b2, 0x0227 },
+ { 0x30b3, 0x1e00 },
+ { 0x30b4, 0x0227 },
+ { 0x30b5, 0x1f00 },
+ { 0x30b6, 0x6227 },
+ { 0x30b7, 0xf800 },
+ { 0x30b8, 0x0000 },
+ { 0x30b9, 0xf000 },
+ { 0x30ba, 0x0000 },
+ { 0x30bb, 0xf000 },
+ { 0x30bc, 0x0000 },
+ { 0x30bd, 0xf000 },
+ { 0x30be, 0x0000 },
+ { 0x30bf, 0xf000 },
+ { 0x30c0, 0x2228 },
+ { 0x30c1, 0x3a03 },
+ { 0x30c2, 0x0228 },
+ { 0x30c3, 0x0801 },
+ { 0x30c4, 0x6255 },
+ { 0x30c5, 0x0c06 },
+ { 0x30c6, 0x0228 },
+ { 0x30c7, 0x5901 },
+ { 0x30c8, 0xe255 },
+ { 0x30c9, 0x030d },
+ { 0x30ca, 0x0255 },
+ { 0x30cb, 0x2c01 },
+ { 0x30cc, 0xe255 },
+ { 0x30cd, 0x4342 },
+ { 0x30ce, 0xe255 },
+ { 0x30cf, 0x73c0 },
+ { 0x30d0, 0x4255 },
+ { 0x30d1, 0x0c00 },
+ { 0x30d2, 0x0228 },
+ { 0x30d3, 0x1f01 },
+ { 0x30d4, 0x0228 },
+ { 0x30d5, 0x1e01 },
+ { 0x30d6, 0x0228 },
+ { 0x30d7, 0xfa00 },
+ { 0x30d8, 0x0000 },
+ { 0x30d9, 0xf000 },
+ { 0x30da, 0x0000 },
+ { 0x30db, 0xf000 },
+ { 0x30dc, 0x0000 },
+ { 0x30dd, 0xf000 },
+ { 0x30de, 0x0000 },
+ { 0x30df, 0xf000 },
+ { 0x30e0, 0x0000 },
+ { 0x30e1, 0xf000 },
+ { 0x30e2, 0x0000 },
+ { 0x30e3, 0xf000 },
+ { 0x30e4, 0x0000 },
+ { 0x30e5, 0xf000 },
+ { 0x30e6, 0x0000 },
+ { 0x30e7, 0xf000 },
+ { 0x30e8, 0x0000 },
+ { 0x30e9, 0xf000 },
+ { 0x30ea, 0x0000 },
+ { 0x30eb, 0xf000 },
+ { 0x30ec, 0x0000 },
+ { 0x30ed, 0xf000 },
+ { 0x30ee, 0x0000 },
+ { 0x30ef, 0xf000 },
+ { 0x30f0, 0x0228 },
+ { 0x30f1, 0x1a01 },
+ { 0x30f2, 0x0228 },
+ { 0x30f3, 0x1e00 },
+ { 0x30f4, 0x0228 },
+ { 0x30f5, 0x1f00 },
+ { 0x30f6, 0x6228 },
+ { 0x30f7, 0xf800 },
+ { 0x30f8, 0x0000 },
+ { 0x30f9, 0xf000 },
+ { 0x30fa, 0x0000 },
+ { 0x30fb, 0xf000 },
+ { 0x30fc, 0x0000 },
+ { 0x30fd, 0xf000 },
+ { 0x30fe, 0x0000 },
+ { 0x30ff, 0xf000 },
+ { 0x3100, 0x222b },
+ { 0x3101, 0x3a03 },
+ { 0x3102, 0x222b },
+ { 0x3103, 0x5803 },
+ { 0x3104, 0xe26f },
+ { 0x3105, 0x030d },
+ { 0x3106, 0x626f },
+ { 0x3107, 0x2c01 },
+ { 0x3108, 0xe26f },
+ { 0x3109, 0x4342 },
+ { 0x310a, 0xe26f },
+ { 0x310b, 0x73c0 },
+ { 0x310c, 0x026f },
+ { 0x310d, 0x0c00 },
+ { 0x310e, 0x022b },
+ { 0x310f, 0x1f01 },
+ { 0x3110, 0x022b },
+ { 0x3111, 0x1e01 },
+ { 0x3112, 0x022b },
+ { 0x3113, 0xfa00 },
+ { 0x3114, 0x0000 },
+ { 0x3115, 0xf000 },
+ { 0x3116, 0x0000 },
+ { 0x3117, 0xf000 },
+ { 0x3118, 0x0000 },
+ { 0x3119, 0xf000 },
+ { 0x311a, 0x0000 },
+ { 0x311b, 0xf000 },
+ { 0x311c, 0x0000 },
+ { 0x311d, 0xf000 },
+ { 0x311e, 0x0000 },
+ { 0x311f, 0xf000 },
+ { 0x3120, 0x022b },
+ { 0x3121, 0x0a01 },
+ { 0x3122, 0x022b },
+ { 0x3123, 0x1e00 },
+ { 0x3124, 0x022b },
+ { 0x3125, 0x1f00 },
+ { 0x3126, 0x622b },
+ { 0x3127, 0xf800 },
+ { 0x3128, 0x0000 },
+ { 0x3129, 0xf000 },
+ { 0x312a, 0x0000 },
+ { 0x312b, 0xf000 },
+ { 0x312c, 0x0000 },
+ { 0x312d, 0xf000 },
+ { 0x312e, 0x0000 },
+ { 0x312f, 0xf000 },
+ { 0x3130, 0x0000 },
+ { 0x3131, 0xf000 },
+ { 0x3132, 0x0000 },
+ { 0x3133, 0xf000 },
+ { 0x3134, 0x0000 },
+ { 0x3135, 0xf000 },
+ { 0x3136, 0x0000 },
+ { 0x3137, 0xf000 },
+ { 0x3138, 0x0000 },
+ { 0x3139, 0xf000 },
+ { 0x313a, 0x0000 },
+ { 0x313b, 0xf000 },
+ { 0x313c, 0x0000 },
+ { 0x313d, 0xf000 },
+ { 0x313e, 0x0000 },
+ { 0x313f, 0xf000 },
+ { 0x3140, 0x0000 },
+ { 0x3141, 0xf000 },
+ { 0x3142, 0x0000 },
+ { 0x3143, 0xf000 },
+ { 0x3144, 0x0000 },
+ { 0x3145, 0xf000 },
+ { 0x3146, 0x0000 },
+ { 0x3147, 0xf000 },
+ { 0x3148, 0x0000 },
+ { 0x3149, 0xf000 },
+ { 0x314a, 0x0000 },
+ { 0x314b, 0xf000 },
+ { 0x314c, 0x0000 },
+ { 0x314d, 0xf000 },
+ { 0x314e, 0x0000 },
+ { 0x314f, 0xf000 },
+ { 0x3150, 0x0000 },
+ { 0x3151, 0xf000 },
+ { 0x3152, 0x0000 },
+ { 0x3153, 0xf000 },
+ { 0x3154, 0x0000 },
+ { 0x3155, 0xf000 },
+ { 0x3156, 0x0000 },
+ { 0x3157, 0xf000 },
+ { 0x3158, 0x0000 },
+ { 0x3159, 0xf000 },
+ { 0x315a, 0x0000 },
+ { 0x315b, 0xf000 },
+ { 0x315c, 0x0000 },
+ { 0x315d, 0xf000 },
+ { 0x315e, 0x0000 },
+ { 0x315f, 0xf000 },
+ { 0x3160, 0x0000 },
+ { 0x3161, 0xf000 },
+ { 0x3162, 0x0000 },
+ { 0x3163, 0xf000 },
+ { 0x3164, 0x0000 },
+ { 0x3165, 0xf000 },
+ { 0x3166, 0x0000 },
+ { 0x3167, 0xf000 },
+ { 0x3168, 0x0000 },
+ { 0x3169, 0xf000 },
+ { 0x316a, 0x0000 },
+ { 0x316b, 0xf000 },
+ { 0x316c, 0x0000 },
+ { 0x316d, 0xf000 },
+ { 0x316e, 0x0000 },
+ { 0x316f, 0xf000 },
+ { 0x3170, 0x0000 },
+ { 0x3171, 0xf000 },
+ { 0x3172, 0x0000 },
+ { 0x3173, 0xf000 },
+ { 0x3174, 0x0000 },
+ { 0x3175, 0xf000 },
+ { 0x3176, 0x0000 },
+ { 0x3177, 0xf000 },
+ { 0x3178, 0x0000 },
+ { 0x3179, 0xf000 },
+ { 0x317a, 0x0000 },
+ { 0x317b, 0xf000 },
+ { 0x317c, 0x0000 },
+ { 0x317d, 0xf000 },
+ { 0x317e, 0x0000 },
+ { 0x317f, 0xf000 },
+ { 0x3180, 0x2001 },
+ { 0x3181, 0xf101 },
+ { 0x3182, 0x0000 },
+ { 0x3183, 0xf000 },
+ { 0x3184, 0x0000 },
+ { 0x3185, 0xf000 },
+ { 0x3186, 0x0000 },
+ { 0x3187, 0xf000 },
+ { 0x3188, 0x0000 },
+ { 0x3189, 0xf000 },
+ { 0x318a, 0x0000 },
+ { 0x318b, 0xf000 },
+ { 0x318c, 0x0000 },
+ { 0x318d, 0xf000 },
+ { 0x318e, 0x0000 },
+ { 0x318f, 0xf000 },
+ { 0x3190, 0x0000 },
+ { 0x3191, 0xf000 },
+ { 0x3192, 0x0000 },
+ { 0x3193, 0xf000 },
+ { 0x3194, 0x0000 },
+ { 0x3195, 0xf000 },
+ { 0x3196, 0x0000 },
+ { 0x3197, 0xf000 },
+ { 0x3198, 0x0000 },
+ { 0x3199, 0xf000 },
+ { 0x319a, 0x0000 },
+ { 0x319b, 0xf000 },
+ { 0x319c, 0x0000 },
+ { 0x319d, 0xf000 },
+ { 0x319e, 0x0000 },
+ { 0x319f, 0xf000 },
+ { 0x31a0, 0x0000 },
+ { 0x31a1, 0xf000 },
+ { 0x31a2, 0x0000 },
+ { 0x31a3, 0xf000 },
+ { 0x31a4, 0x0000 },
+ { 0x31a5, 0xf000 },
+ { 0x31a6, 0x0000 },
+ { 0x31a7, 0xf000 },
+ { 0x31a8, 0x0000 },
+ { 0x31a9, 0xf000 },
+ { 0x31aa, 0x0000 },
+ { 0x31ab, 0xf000 },
+ { 0x31ac, 0x0000 },
+ { 0x31ad, 0xf000 },
+ { 0x31ae, 0x0000 },
+ { 0x31af, 0xf000 },
+ { 0x31b0, 0x0000 },
+ { 0x31b1, 0xf000 },
+ { 0x31b2, 0x0000 },
+ { 0x31b3, 0xf000 },
+ { 0x31b4, 0x0000 },
+ { 0x31b5, 0xf000 },
+ { 0x31b6, 0x0000 },
+ { 0x31b7, 0xf000 },
+ { 0x31b8, 0x0000 },
+ { 0x31b9, 0xf000 },
+ { 0x31ba, 0x0000 },
+ { 0x31bb, 0xf000 },
+ { 0x31bc, 0x0000 },
+ { 0x31bd, 0xf000 },
+ { 0x31be, 0x0000 },
+ { 0x31bf, 0xf000 },
+ { 0x31c0, 0x0000 },
+ { 0x31c1, 0xf000 },
+ { 0x31c2, 0x0000 },
+ { 0x31c3, 0xf000 },
+ { 0x31c4, 0x0000 },
+ { 0x31c5, 0xf000 },
+ { 0x31c6, 0x0000 },
+ { 0x31c7, 0xf000 },
+ { 0x31c8, 0x0000 },
+ { 0x31c9, 0xf000 },
+ { 0x31ca, 0x0000 },
+ { 0x31cb, 0xf000 },
+ { 0x31cc, 0x0000 },
+ { 0x31cd, 0xf000 },
+ { 0x31ce, 0x0000 },
+ { 0x31cf, 0xf000 },
+ { 0x31d0, 0x0000 },
+ { 0x31d1, 0xf000 },
+ { 0x31d2, 0x0000 },
+ { 0x31d3, 0xf000 },
+ { 0x31d4, 0x0000 },
+ { 0x31d5, 0xf000 },
+ { 0x31d6, 0x0000 },
+ { 0x31d7, 0xf000 },
+ { 0x31d8, 0x0000 },
+ { 0x31d9, 0xf000 },
+ { 0x31da, 0x0000 },
+ { 0x31db, 0xf000 },
+ { 0x31dc, 0x0000 },
+ { 0x31dd, 0xf000 },
+ { 0x31de, 0x0000 },
+ { 0x31df, 0xf000 },
+ { 0x31e0, 0x0000 },
+ { 0x31e1, 0xf000 },
+ { 0x31e2, 0x0000 },
+ { 0x31e3, 0xf000 },
+ { 0x31e4, 0x0000 },
+ { 0x31e5, 0xf000 },
+ { 0x31e6, 0x0000 },
+ { 0x31e7, 0xf000 },
+ { 0x31e8, 0x0000 },
+ { 0x31e9, 0xf000 },
+ { 0x31ea, 0x0000 },
+ { 0x31eb, 0xf000 },
+ { 0x31ec, 0x0000 },
+ { 0x31ed, 0xf000 },
+ { 0x31ee, 0x0000 },
+ { 0x31ef, 0xf000 },
+ { 0x31f0, 0x0000 },
+ { 0x31f1, 0xf000 },
+ { 0x31f2, 0x0000 },
+ { 0x31f3, 0xf000 },
+ { 0x31f4, 0x0000 },
+ { 0x31f5, 0xf000 },
+ { 0x31f6, 0x0000 },
+ { 0x31f7, 0xf000 },
+ { 0x31f8, 0x0000 },
+ { 0x31f9, 0xf000 },
+ { 0x31fa, 0x0000 },
+ { 0x31fb, 0xf000 },
+ { 0x31fc, 0x0000 },
+ { 0x31fd, 0xf000 },
+ { 0x31fe, 0x0000 },
+ { 0x31ff, 0xf000 },
+ { 0x024d, 0xff50 },
+ { 0x0252, 0xff50 },
+ { 0x0259, 0x0112 },
+ { 0x025e, 0x0112 },
+};
+
+static int wm5102_sysclk_ev(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ struct snd_soc_codec *codec = w->codec;
+ struct arizona *arizona = dev_get_drvdata(codec->dev);
+ struct regmap *regmap = codec->control_data;
+ const struct reg_default *patch = NULL;
+ int i, patch_size;
+
+ switch (arizona->rev) {
+ case 0:
+ patch = wm5102_sysclk_reva_patch;
+ patch_size = ARRAY_SIZE(wm5102_sysclk_reva_patch);
+ break;
+ }
+
+ switch (event) {
+ case SND_SOC_DAPM_POST_PMU:
+ if (patch)
+ for (i = 0; i < patch_size; i++)
+ regmap_write(regmap, patch[i].reg,
+ patch[i].def);
+ break;
+
+ default:
+ break;
+ }
+
+ return 0;
+}
+
static const struct snd_kcontrol_new wm5102_snd_controls[] = {
SOC_SINGLE("IN1 High Performance Switch", ARIZONA_IN1L_CONTROL,
ARIZONA_IN1_OSR_SHIFT, 1, 0),
@@ -297,7 +847,7 @@
static const struct snd_soc_dapm_widget wm5102_dapm_widgets[] = {
SND_SOC_DAPM_SUPPLY("SYSCLK", ARIZONA_SYSTEM_CLOCK_1, ARIZONA_SYSCLK_ENA_SHIFT,
- 0, NULL, 0),
+ 0, wm5102_sysclk_ev, SND_SOC_DAPM_POST_PMU),
SND_SOC_DAPM_SUPPLY("ASYNCCLK", ARIZONA_ASYNC_CLOCK_1,
ARIZONA_ASYNC_CLK_ENA_SHIFT, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY("OPCLK", ARIZONA_OUTPUT_SYSTEM_CLOCK,
diff --git a/sound/soc/codecs/wm8978.c b/sound/soc/codecs/wm8978.c
index 5421fd9..4c0a8e4 100644
--- a/sound/soc/codecs/wm8978.c
+++ b/sound/soc/codecs/wm8978.c
@@ -782,7 +782,7 @@
wm8978->mclk_idx = -1;
f_sel = wm8978->f_mclk;
} else {
- if (!wm8978->f_pllout) {
+ if (!wm8978->f_opclk) {
/* We only enter here, if OPCLK is not used */
int ret = wm8978_configure_pll(codec);
if (ret < 0)
diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c
index 2b2dadc5..b2b2b37 100644
--- a/sound/soc/codecs/wm8994.c
+++ b/sound/soc/codecs/wm8994.c
@@ -1045,6 +1045,7 @@
struct snd_kcontrol *kcontrol, int event)
{
struct snd_soc_codec *codec = w->codec;
+ struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec);
struct wm8994 *control = codec->control_data;
int mask = WM8994_AIF1DAC1L_ENA | WM8994_AIF1DAC1R_ENA;
int i;
@@ -1063,6 +1064,10 @@
switch (event) {
case SND_SOC_DAPM_PRE_PMU:
+ /* Don't enable timeslot 2 if not in use */
+ if (wm8994->channels[0] <= 2)
+ mask &= ~(WM8994_AIF1DAC2L_ENA | WM8994_AIF1DAC2R_ENA);
+
val = snd_soc_read(codec, WM8994_AIF1_CONTROL_1);
if ((val & WM8994_AIF1ADCL_SRC) &&
(val & WM8994_AIF1ADCR_SRC))
@@ -2687,7 +2692,7 @@
return -EINVAL;
}
- bclk_rate = params_rate(params) * 4;
+ bclk_rate = params_rate(params);
switch (params_format(params)) {
case SNDRV_PCM_FORMAT_S16_LE:
bclk_rate *= 16;
@@ -2708,6 +2713,17 @@
return -EINVAL;
}
+ wm8994->channels[id] = params_channels(params);
+ switch (params_channels(params)) {
+ case 1:
+ case 2:
+ bclk_rate *= 2;
+ break;
+ default:
+ bclk_rate *= 4;
+ break;
+ }
+
/* Try to find an appropriate sample rate; look for an exact match. */
for (i = 0; i < ARRAY_SIZE(srs); i++)
if (srs[i].rate == params_rate(params))
@@ -3706,7 +3722,7 @@
} while (count--);
if (count == 0)
- dev_warn(codec->dev, "No impedence range reported for jack\n");
+ dev_warn(codec->dev, "No impedance range reported for jack\n");
#ifndef CONFIG_SND_SOC_WM8994_MODULE
trace_snd_soc_jack_irq(dev_name(codec->dev));
diff --git a/sound/soc/codecs/wm8994.h b/sound/soc/codecs/wm8994.h
index f142ec1..ccbce57 100644
--- a/sound/soc/codecs/wm8994.h
+++ b/sound/soc/codecs/wm8994.h
@@ -77,6 +77,7 @@
int sysclk_rate[2];
int mclk[2];
int aifclk[2];
+ int channels[2];
struct wm8994_fll_config fll[2], fll_suspend[2];
struct completion fll_locked[2];
bool fll_locked_irq;
diff --git a/sound/soc/fsl/imx-pcm-fiq.c b/sound/soc/fsl/imx-pcm-fiq.c
index 22c6130..9ffc9e6 100644
--- a/sound/soc/fsl/imx-pcm-fiq.c
+++ b/sound/soc/fsl/imx-pcm-fiq.c
@@ -29,7 +29,6 @@
#include <asm/fiq.h>
-#include <mach/irqs.h>
#include <linux/platform_data/asoc-imx-ssi.h>
#include "imx-ssi.h"
diff --git a/sound/soc/fsl/imx-ssi.c b/sound/soc/fsl/imx-ssi.c
index 006f7d4..dd56644 100644
--- a/sound/soc/fsl/imx-ssi.c
+++ b/sound/soc/fsl/imx-ssi.c
@@ -48,7 +48,6 @@
#include <sound/soc.h>
#include <linux/platform_data/asoc-imx-ssi.h>
-#include <mach/hardware.h>
#include "imx-ssi.h"
diff --git a/sound/soc/kirkwood/kirkwood-dma.c b/sound/soc/kirkwood/kirkwood-dma.c
index b9f1659..2ba0814 100644
--- a/sound/soc/kirkwood/kirkwood-dma.c
+++ b/sound/soc/kirkwood/kirkwood-dma.c
@@ -71,7 +71,6 @@
printk(KERN_WARNING "%s: got err interrupt 0x%lx\n",
__func__, cause);
writel(cause, priv->io + KIRKWOOD_ERR_CAUSE);
- return IRQ_HANDLED;
}
/* we've enabled only bytes interrupts ... */
@@ -178,7 +177,7 @@
}
dram = mv_mbus_dram_info();
- addr = virt_to_phys(substream->dma_buffer.area);
+ addr = substream->dma_buffer.addr;
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
prdata->play_stream = substream;
kirkwood_dma_conf_mbus_windows(priv->io,
diff --git a/sound/soc/kirkwood/kirkwood-i2s.c b/sound/soc/kirkwood/kirkwood-i2s.c
index 542538d..1d5db48 100644
--- a/sound/soc/kirkwood/kirkwood-i2s.c
+++ b/sound/soc/kirkwood/kirkwood-i2s.c
@@ -95,7 +95,7 @@
do {
cpu_relax();
value = readl(io + KIRKWOOD_DCO_SPCR_STATUS);
- value &= KIRKWOOD_DCO_SPCR_STATUS;
+ value &= KIRKWOOD_DCO_SPCR_STATUS_DCO_LOCK;
} while (value == 0);
}
@@ -180,67 +180,72 @@
int cmd, struct snd_soc_dai *dai)
{
struct kirkwood_dma_data *priv = snd_soc_dai_get_drvdata(dai);
- unsigned long value;
+ uint32_t ctl, value;
- /*
- * specs says KIRKWOOD_PLAYCTL must be read 2 times before
- * changing it. So read 1 time here and 1 later.
- */
- value = readl(priv->io + KIRKWOOD_PLAYCTL);
+ ctl = readl(priv->io + KIRKWOOD_PLAYCTL);
+ if (ctl & KIRKWOOD_PLAYCTL_PAUSE) {
+ unsigned timeout = 5000;
+ /*
+ * The Armada510 spec says that if we enter pause mode, the
+ * busy bit must be read back as clear _twice_. Make sure
+ * we respect that otherwise we get DMA underruns.
+ */
+ do {
+ value = ctl;
+ ctl = readl(priv->io + KIRKWOOD_PLAYCTL);
+ if (!((ctl | value) & KIRKWOOD_PLAYCTL_PLAY_BUSY))
+ break;
+ udelay(1);
+ } while (timeout--);
+
+ if ((ctl | value) & KIRKWOOD_PLAYCTL_PLAY_BUSY)
+ dev_notice(dai->dev, "timed out waiting for busy to deassert: %08x\n",
+ ctl);
+ }
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
- /* stop audio, enable interrupts */
- value = readl(priv->io + KIRKWOOD_PLAYCTL);
- value |= KIRKWOOD_PLAYCTL_PAUSE;
- writel(value, priv->io + KIRKWOOD_PLAYCTL);
-
value = readl(priv->io + KIRKWOOD_INT_MASK);
value |= KIRKWOOD_INT_CAUSE_PLAY_BYTES;
writel(value, priv->io + KIRKWOOD_INT_MASK);
/* configure audio & enable i2s playback */
- value = readl(priv->io + KIRKWOOD_PLAYCTL);
- value &= ~KIRKWOOD_PLAYCTL_BURST_MASK;
- value &= ~(KIRKWOOD_PLAYCTL_PAUSE | KIRKWOOD_PLAYCTL_I2S_MUTE
+ ctl &= ~KIRKWOOD_PLAYCTL_BURST_MASK;
+ ctl &= ~(KIRKWOOD_PLAYCTL_PAUSE | KIRKWOOD_PLAYCTL_I2S_MUTE
| KIRKWOOD_PLAYCTL_SPDIF_EN);
if (priv->burst == 32)
- value |= KIRKWOOD_PLAYCTL_BURST_32;
+ ctl |= KIRKWOOD_PLAYCTL_BURST_32;
else
- value |= KIRKWOOD_PLAYCTL_BURST_128;
- value |= KIRKWOOD_PLAYCTL_I2S_EN;
- writel(value, priv->io + KIRKWOOD_PLAYCTL);
+ ctl |= KIRKWOOD_PLAYCTL_BURST_128;
+ ctl |= KIRKWOOD_PLAYCTL_I2S_EN;
+ writel(ctl, priv->io + KIRKWOOD_PLAYCTL);
break;
case SNDRV_PCM_TRIGGER_STOP:
/* stop audio, disable interrupts */
- value = readl(priv->io + KIRKWOOD_PLAYCTL);
- value |= KIRKWOOD_PLAYCTL_PAUSE | KIRKWOOD_PLAYCTL_I2S_MUTE;
- writel(value, priv->io + KIRKWOOD_PLAYCTL);
+ ctl |= KIRKWOOD_PLAYCTL_PAUSE | KIRKWOOD_PLAYCTL_I2S_MUTE;
+ writel(ctl, priv->io + KIRKWOOD_PLAYCTL);
value = readl(priv->io + KIRKWOOD_INT_MASK);
value &= ~KIRKWOOD_INT_CAUSE_PLAY_BYTES;
writel(value, priv->io + KIRKWOOD_INT_MASK);
/* disable all playbacks */
- value = readl(priv->io + KIRKWOOD_PLAYCTL);
- value &= ~(KIRKWOOD_PLAYCTL_I2S_EN | KIRKWOOD_PLAYCTL_SPDIF_EN);
- writel(value, priv->io + KIRKWOOD_PLAYCTL);
+ ctl &= ~(KIRKWOOD_PLAYCTL_I2S_EN | KIRKWOOD_PLAYCTL_SPDIF_EN);
+ writel(ctl, priv->io + KIRKWOOD_PLAYCTL);
break;
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
case SNDRV_PCM_TRIGGER_SUSPEND:
- value = readl(priv->io + KIRKWOOD_PLAYCTL);
- value |= KIRKWOOD_PLAYCTL_PAUSE | KIRKWOOD_PLAYCTL_I2S_MUTE;
- writel(value, priv->io + KIRKWOOD_PLAYCTL);
+ ctl |= KIRKWOOD_PLAYCTL_PAUSE | KIRKWOOD_PLAYCTL_I2S_MUTE;
+ writel(ctl, priv->io + KIRKWOOD_PLAYCTL);
break;
case SNDRV_PCM_TRIGGER_RESUME:
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
- value = readl(priv->io + KIRKWOOD_PLAYCTL);
- value &= ~(KIRKWOOD_PLAYCTL_PAUSE | KIRKWOOD_PLAYCTL_I2S_MUTE);
- writel(value, priv->io + KIRKWOOD_PLAYCTL);
+ ctl &= ~(KIRKWOOD_PLAYCTL_PAUSE | KIRKWOOD_PLAYCTL_I2S_MUTE);
+ writel(ctl, priv->io + KIRKWOOD_PLAYCTL);
break;
default:
@@ -260,11 +265,6 @@
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
- /* stop audio, enable interrupts */
- value = readl(priv->io + KIRKWOOD_RECCTL);
- value |= KIRKWOOD_RECCTL_PAUSE;
- writel(value, priv->io + KIRKWOOD_RECCTL);
-
value = readl(priv->io + KIRKWOOD_INT_MASK);
value |= KIRKWOOD_INT_CAUSE_REC_BYTES;
writel(value, priv->io + KIRKWOOD_INT_MASK);
diff --git a/sound/soc/mxs/mxs-saif.c b/sound/soc/mxs/mxs-saif.c
index aa037b29..c294fbb 100644
--- a/sound/soc/mxs/mxs-saif.c
+++ b/sound/soc/mxs/mxs-saif.c
@@ -523,16 +523,24 @@
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
/*
- * write a data to saif data register to trigger
- * the transfer
+ * write data to saif data register to trigger
+ * the transfer.
+ * For 24-bit format the 32-bit FIFO register stores
+ * only one channel, so we need to write twice.
+ * This is also safe for the other non 24-bit formats.
*/
__raw_writel(0, saif->base + SAIF_DATA);
+ __raw_writel(0, saif->base + SAIF_DATA);
} else {
/*
- * read a data from saif data register to trigger
- * the receive
+ * read data from saif data register to trigger
+ * the receive.
+ * For 24-bit format the 32-bit FIFO register stores
+ * only one channel, so we need to read twice.
+ * This is also safe for the other non 24-bit formats.
*/
__raw_readl(saif->base + SAIF_DATA);
+ __raw_readl(saif->base + SAIF_DATA);
}
master_saif->ongoing = 1;
@@ -812,3 +820,4 @@
MODULE_AUTHOR("Freescale Semiconductor, Inc.");
MODULE_DESCRIPTION("MXS ASoC SAIF driver");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:mxs-saif");
diff --git a/sound/soc/omap/am3517evm.c b/sound/soc/omap/am3517evm.c
index fad3506..c1900b2 100644
--- a/sound/soc/omap/am3517evm.c
+++ b/sound/soc/omap/am3517evm.c
@@ -25,8 +25,6 @@
#include <sound/soc.h>
#include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <mach/gpio.h>
#include <linux/platform_data/asoc-ti-mcbsp.h>
#include "omap-mcbsp.h"
diff --git a/sound/soc/omap/n810.c b/sound/soc/omap/n810.c
index 521bfc3..230b8c14 100644
--- a/sound/soc/omap/n810.c
+++ b/sound/soc/omap/n810.c
@@ -29,7 +29,6 @@
#include <sound/soc.h>
#include <asm/mach-types.h>
-#include <mach/hardware.h>
#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/platform_data/asoc-ti-mcbsp.h>
diff --git a/sound/soc/omap/omap-dmic.c b/sound/soc/omap/omap-dmic.c
index 68f2cd1..5a6aeaf 100644
--- a/sound/soc/omap/omap-dmic.c
+++ b/sound/soc/omap/omap-dmic.c
@@ -464,9 +464,9 @@
mutex_init(&dmic->mutex);
- dmic->fclk = clk_get(dmic->dev, "dmic_fck");
+ dmic->fclk = clk_get(dmic->dev, "fck");
if (IS_ERR(dmic->fclk)) {
- dev_err(dmic->dev, "cant get dmic_fck\n");
+ dev_err(dmic->dev, "cant get fck\n");
return -ENODEV;
}
diff --git a/sound/soc/omap/omap-pcm.c b/sound/soc/omap/omap-pcm.c
index 340874e..52977aa 100644
--- a/sound/soc/omap/omap-pcm.c
+++ b/sound/soc/omap/omap-pcm.c
@@ -32,9 +32,14 @@
#include <sound/dmaengine_pcm.h>
#include <sound/soc.h>
-#include <plat/cpu.h>
#include "omap-pcm.h"
+#ifdef CONFIG_ARCH_OMAP1
+#define pcm_omap1510() cpu_is_omap1510()
+#else
+#define pcm_omap1510() 0
+#endif
+
static const struct snd_pcm_hardware omap_pcm_hardware = {
.info = SNDRV_PCM_INFO_MMAP |
SNDRV_PCM_INFO_MMAP_VALID |
@@ -159,7 +164,7 @@
{
snd_pcm_uframes_t offset;
- if (cpu_is_omap1510())
+ if (pcm_omap1510())
offset = snd_dmaengine_pcm_pointer_no_residue(substream);
else
offset = snd_dmaengine_pcm_pointer(substream);
diff --git a/sound/soc/omap/osk5912.c b/sound/soc/omap/osk5912.c
index 3960e8d..06ef8d6 100644
--- a/sound/soc/omap/osk5912.c
+++ b/sound/soc/omap/osk5912.c
@@ -28,7 +28,6 @@
#include <sound/soc.h>
#include <asm/mach-types.h>
-#include <mach/hardware.h>
#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/platform_data/asoc-ti-mcbsp.h>
diff --git a/sound/soc/omap/sdp3430.c b/sound/soc/omap/sdp3430.c
index 597cae7..b462a2c 100644
--- a/sound/soc/omap/sdp3430.c
+++ b/sound/soc/omap/sdp3430.c
@@ -31,8 +31,6 @@
#include <sound/jack.h>
#include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <mach/gpio.h>
#include <linux/platform_data/gpio-omap.h>
#include <linux/platform_data/asoc-ti-mcbsp.h>
diff --git a/sound/soc/omap/zoom2.c b/sound/soc/omap/zoom2.c
index 677b567..1ff6bb9 100644
--- a/sound/soc/omap/zoom2.c
+++ b/sound/soc/omap/zoom2.c
@@ -21,15 +21,14 @@
#include <linux/clk.h>
#include <linux/platform_device.h>
+#include <linux/gpio.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/soc.h>
#include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <mach/gpio.h>
-#include <mach/board-zoom.h>
#include <linux/platform_data/asoc-ti-mcbsp.h>
+#include <linux/platform_data/gpio-omap.h>
/* Register descriptions for twl4030 codec part */
#include <linux/mfd/twl4030-audio.h>
diff --git a/sound/soc/samsung/Kconfig b/sound/soc/samsung/Kconfig
index e7b8317..3c7c3a5 100644
--- a/sound/soc/samsung/Kconfig
+++ b/sound/soc/samsung/Kconfig
@@ -207,6 +207,8 @@
select SND_SOC_WM5102
select SND_SOC_WM5110
select SND_SOC_WM9081
+ select SND_SOC_WM0010
+ select SND_SOC_WM1250_EV1
config SND_SOC_LOWLAND
tristate "Audio support for Wolfson Lowland"
diff --git a/sound/soc/samsung/bells.c b/sound/soc/samsung/bells.c
index b0d46d6..a2ca156 100644
--- a/sound/soc/samsung/bells.c
+++ b/sound/soc/samsung/bells.c
@@ -212,7 +212,7 @@
{
.name = "Sub",
.stream_name = "Sub",
- .cpu_dai_name = "wm5110-aif3",
+ .cpu_dai_name = "wm5102-aif3",
.codec_dai_name = "wm9081-hifi",
.codec_name = "wm9081.1-006c",
.dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF
diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c
index d119862..10d21be 100644
--- a/sound/soc/soc-core.c
+++ b/sound/soc/soc-core.c
@@ -2786,8 +2786,9 @@
val = (ucontrol->value.integer.value[0] + min) & mask;
val = val << shift;
- if (snd_soc_update_bits_locked(codec, reg, val_mask, val))
- return err;
+ err = snd_soc_update_bits_locked(codec, reg, val_mask, val);
+ if (err < 0)
+ return err;
if (snd_soc_volsw_is_stereo(mc)) {
val_mask = mask << rshift;
diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c
index d0a4be3..6e35bca 100644
--- a/sound/soc/soc-dapm.c
+++ b/sound/soc/soc-dapm.c
@@ -3745,7 +3745,7 @@
{
struct snd_soc_codec *codec;
- list_for_each_entry(codec, &card->codec_dev_list, list) {
+ list_for_each_entry(codec, &card->codec_dev_list, card_list) {
soc_dapm_shutdown_codec(&codec->dapm);
if (codec->dapm.bias_level == SND_SOC_BIAS_STANDBY)
snd_soc_dapm_set_bias_level(&codec->dapm,
diff --git a/sound/soc/tegra/tegra30_ahub.c b/sound/soc/tegra/tegra30_ahub.c
index bf56101..64b67a3 100644
--- a/sound/soc/tegra/tegra30_ahub.c
+++ b/sound/soc/tegra/tegra30_ahub.c
@@ -26,7 +26,6 @@
#include <linux/regmap.h>
#include <linux/slab.h>
#include <mach/clk.h>
-#include <mach/dma.h>
#include <sound/soc.h>
#include "tegra30_ahub.h"
diff --git a/sound/soc/tegra/tegra_pcm.h b/sound/soc/tegra/tegra_pcm.h
index b40279b..bc8b46a 100644
--- a/sound/soc/tegra/tegra_pcm.h
+++ b/sound/soc/tegra/tegra_pcm.h
@@ -31,8 +31,6 @@
#ifndef __TEGRA_PCM_H__
#define __TEGRA_PCM_H__
-#include <mach/dma.h>
-
struct tegra_pcm_dma_params {
unsigned long addr;
unsigned long wrap;
diff --git a/sound/soc/ux500/mop500.c b/sound/soc/ux500/mop500.c
index 356611d..54f7e25 100644
--- a/sound/soc/ux500/mop500.c
+++ b/sound/soc/ux500/mop500.c
@@ -57,6 +57,20 @@
.num_links = ARRAY_SIZE(mop500_dai_links),
};
+static void mop500_of_node_put(void)
+{
+ int i;
+
+ for (i = 0; i < 2; i++) {
+ if (mop500_dai_links[i].cpu_of_node)
+ of_node_put((struct device_node *)
+ mop500_dai_links[i].cpu_of_node);
+ if (mop500_dai_links[i].codec_of_node)
+ of_node_put((struct device_node *)
+ mop500_dai_links[i].codec_of_node);
+ }
+}
+
static int __devinit mop500_of_probe(struct platform_device *pdev,
struct device_node *np)
{
@@ -69,6 +83,7 @@
if (!(msp_np[0] && msp_np[1] && codec_np)) {
dev_err(&pdev->dev, "Phandle missing or invalid\n");
+ mop500_of_node_put();
return -EINVAL;
}
@@ -83,6 +98,7 @@
return 0;
}
+
static int __devinit mop500_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
@@ -128,6 +144,7 @@
snd_soc_unregister_card(mop500_card);
mop500_ab8500_remove(mop500_card);
+ mop500_of_node_put();
return 0;
}
diff --git a/sound/soc/ux500/ux500_msp_i2s.c b/sound/soc/ux500/ux500_msp_i2s.c
index b7c996e..a26c6bf 100644
--- a/sound/soc/ux500/ux500_msp_i2s.c
+++ b/sound/soc/ux500/ux500_msp_i2s.c
@@ -18,6 +18,7 @@
#include <linux/pinctrl/consumer.h>
#include <linux/delay.h>
#include <linux/slab.h>
+#include <linux/io.h>
#include <linux/of.h>
#include <mach/hardware.h>
@@ -697,14 +698,11 @@
platform_data = devm_kzalloc(&pdev->dev,
sizeof(struct msp_i2s_platform_data), GFP_KERNEL);
if (!platform_data)
- ret = -ENOMEM;
+ return -ENOMEM;
}
} else
if (!platform_data)
- ret = -EINVAL;
-
- if (ret)
- goto err_res;
+ return -EINVAL;
dev_dbg(&pdev->dev, "%s: Enter (name: %s, id: %d).\n", __func__,
pdev->name, platform_data->id);
diff --git a/sound/usb/card.c b/sound/usb/card.c
index 561bb74..dbf7999 100644
--- a/sound/usb/card.c
+++ b/sound/usb/card.c
@@ -339,7 +339,7 @@
}
mutex_init(&chip->mutex);
- mutex_init(&chip->shutdown_mutex);
+ init_rwsem(&chip->shutdown_rwsem);
chip->index = idx;
chip->dev = dev;
chip->card = card;
@@ -559,9 +559,11 @@
return;
card = chip->card;
- mutex_lock(®ister_mutex);
- mutex_lock(&chip->shutdown_mutex);
+ down_write(&chip->shutdown_rwsem);
chip->shutdown = 1;
+ up_write(&chip->shutdown_rwsem);
+
+ mutex_lock(®ister_mutex);
chip->num_interfaces--;
if (chip->num_interfaces <= 0) {
snd_card_disconnect(card);
@@ -582,11 +584,9 @@
snd_usb_mixer_disconnect(p);
}
usb_chip[chip->index] = NULL;
- mutex_unlock(&chip->shutdown_mutex);
mutex_unlock(®ister_mutex);
snd_card_free_when_closed(card);
} else {
- mutex_unlock(&chip->shutdown_mutex);
mutex_unlock(®ister_mutex);
}
}
@@ -618,16 +618,20 @@
{
int err = -ENODEV;
+ down_read(&chip->shutdown_rwsem);
if (!chip->shutdown && !chip->probing)
err = usb_autopm_get_interface(chip->pm_intf);
+ up_read(&chip->shutdown_rwsem);
return err;
}
void snd_usb_autosuspend(struct snd_usb_audio *chip)
{
+ down_read(&chip->shutdown_rwsem);
if (!chip->shutdown && !chip->probing)
usb_autopm_put_interface(chip->pm_intf);
+ up_read(&chip->shutdown_rwsem);
}
static int usb_audio_suspend(struct usb_interface *intf, pm_message_t message)
diff --git a/sound/usb/card.h b/sound/usb/card.h
index afa4f9e..814cb35 100644
--- a/sound/usb/card.h
+++ b/sound/usb/card.h
@@ -126,6 +126,7 @@
struct snd_usb_endpoint *sync_endpoint;
unsigned long flags;
bool need_setup_ep; /* (re)configure EP at prepare? */
+ unsigned int speed; /* USB_SPEED_XXX */
u64 formats; /* format bitmasks (all or'ed) */
unsigned int num_formats; /* number of supported audio formats (list) */
diff --git a/sound/usb/endpoint.c b/sound/usb/endpoint.c
index 7f78c6d..34de6f2 100644
--- a/sound/usb/endpoint.c
+++ b/sound/usb/endpoint.c
@@ -35,6 +35,7 @@
#define EP_FLAG_ACTIVATED 0
#define EP_FLAG_RUNNING 1
+#define EP_FLAG_STOPPING 2
/*
* snd_usb_endpoint is a model that abstracts everything related to an
@@ -502,10 +503,20 @@
if (alive)
snd_printk(KERN_ERR "timeout: still %d active urbs on EP #%x\n",
alive, ep->ep_num);
+ clear_bit(EP_FLAG_STOPPING, &ep->flags);
return 0;
}
+/* sync the pending stop operation;
+ * this function itself doesn't trigger the stop operation
+ */
+void snd_usb_endpoint_sync_pending_stop(struct snd_usb_endpoint *ep)
+{
+ if (ep && test_bit(EP_FLAG_STOPPING, &ep->flags))
+ wait_clear_urbs(ep);
+}
+
/*
* unlink active urbs.
*/
@@ -918,6 +929,8 @@
if (wait)
wait_clear_urbs(ep);
+ else
+ set_bit(EP_FLAG_STOPPING, &ep->flags);
}
}
diff --git a/sound/usb/endpoint.h b/sound/usb/endpoint.h
index 6376ccf..3d4c970 100644
--- a/sound/usb/endpoint.h
+++ b/sound/usb/endpoint.h
@@ -19,6 +19,7 @@
int snd_usb_endpoint_start(struct snd_usb_endpoint *ep, int can_sleep);
void snd_usb_endpoint_stop(struct snd_usb_endpoint *ep,
int force, int can_sleep, int wait);
+void snd_usb_endpoint_sync_pending_stop(struct snd_usb_endpoint *ep);
int snd_usb_endpoint_activate(struct snd_usb_endpoint *ep);
int snd_usb_endpoint_deactivate(struct snd_usb_endpoint *ep);
void snd_usb_endpoint_free(struct list_head *head);
diff --git a/sound/usb/midi.c b/sound/usb/midi.c
index c83f614..eeefbce 100644
--- a/sound/usb/midi.c
+++ b/sound/usb/midi.c
@@ -148,6 +148,7 @@
struct snd_usb_midi_out_endpoint* ep;
struct snd_rawmidi_substream *substream;
int active;
+ bool autopm_reference;
uint8_t cable; /* cable number << 4 */
uint8_t state;
#define STATE_UNKNOWN 0
@@ -1076,7 +1077,8 @@
return -ENXIO;
}
err = usb_autopm_get_interface(umidi->iface);
- if (err < 0)
+ port->autopm_reference = err >= 0;
+ if (err < 0 && err != -EACCES)
return -EIO;
substream->runtime->private_data = port;
port->state = STATE_UNKNOWN;
@@ -1087,9 +1089,11 @@
static int snd_usbmidi_output_close(struct snd_rawmidi_substream *substream)
{
struct snd_usb_midi* umidi = substream->rmidi->private_data;
+ struct usbmidi_out_port *port = substream->runtime->private_data;
substream_open(substream, 0);
- usb_autopm_put_interface(umidi->iface);
+ if (port->autopm_reference)
+ usb_autopm_put_interface(umidi->iface);
return 0;
}
diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c
index fe56c9d..298070e 100644
--- a/sound/usb/mixer.c
+++ b/sound/usb/mixer.c
@@ -287,25 +287,32 @@
unsigned char buf[2];
int val_len = cval->val_type >= USB_MIXER_S16 ? 2 : 1;
int timeout = 10;
- int err;
+ int idx = 0, err;
err = snd_usb_autoresume(cval->mixer->chip);
if (err < 0)
return -EIO;
+ down_read(&chip->shutdown_rwsem);
while (timeout-- > 0) {
+ if (chip->shutdown)
+ break;
+ idx = snd_usb_ctrl_intf(chip) | (cval->id << 8);
if (snd_usb_ctl_msg(chip->dev, usb_rcvctrlpipe(chip->dev, 0), request,
USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN,
- validx, snd_usb_ctrl_intf(chip) | (cval->id << 8),
- buf, val_len) >= val_len) {
+ validx, idx, buf, val_len) >= val_len) {
*value_ret = convert_signed_value(cval, snd_usb_combine_bytes(buf, val_len));
- snd_usb_autosuspend(cval->mixer->chip);
- return 0;
+ err = 0;
+ goto out;
}
}
- snd_usb_autosuspend(cval->mixer->chip);
snd_printdd(KERN_ERR "cannot get ctl value: req = %#x, wValue = %#x, wIndex = %#x, type = %d\n",
- request, validx, snd_usb_ctrl_intf(chip) | (cval->id << 8), cval->val_type);
- return -EINVAL;
+ request, validx, idx, cval->val_type);
+ err = -EINVAL;
+
+ out:
+ up_read(&chip->shutdown_rwsem);
+ snd_usb_autosuspend(cval->mixer->chip);
+ return err;
}
static int get_ctl_value_v2(struct usb_mixer_elem_info *cval, int request, int validx, int *value_ret)
@@ -313,7 +320,7 @@
struct snd_usb_audio *chip = cval->mixer->chip;
unsigned char buf[2 + 3*sizeof(__u16)]; /* enough space for one range */
unsigned char *val;
- int ret, size;
+ int idx = 0, ret, size;
__u8 bRequest;
if (request == UAC_GET_CUR) {
@@ -330,16 +337,22 @@
if (ret)
goto error;
- ret = snd_usb_ctl_msg(chip->dev, usb_rcvctrlpipe(chip->dev, 0), bRequest,
+ down_read(&chip->shutdown_rwsem);
+ if (chip->shutdown)
+ ret = -ENODEV;
+ else {
+ idx = snd_usb_ctrl_intf(chip) | (cval->id << 8);
+ ret = snd_usb_ctl_msg(chip->dev, usb_rcvctrlpipe(chip->dev, 0), bRequest,
USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN,
- validx, snd_usb_ctrl_intf(chip) | (cval->id << 8),
- buf, size);
+ validx, idx, buf, size);
+ }
+ up_read(&chip->shutdown_rwsem);
snd_usb_autosuspend(chip);
if (ret < 0) {
error:
snd_printk(KERN_ERR "cannot get ctl value: req = %#x, wValue = %#x, wIndex = %#x, type = %d\n",
- request, validx, snd_usb_ctrl_intf(chip) | (cval->id << 8), cval->val_type);
+ request, validx, idx, cval->val_type);
return ret;
}
@@ -417,7 +430,7 @@
{
struct snd_usb_audio *chip = cval->mixer->chip;
unsigned char buf[2];
- int val_len, err, timeout = 10;
+ int idx = 0, val_len, err, timeout = 10;
if (cval->mixer->protocol == UAC_VERSION_1) {
val_len = cval->val_type >= USB_MIXER_S16 ? 2 : 1;
@@ -440,19 +453,27 @@
err = snd_usb_autoresume(chip);
if (err < 0)
return -EIO;
- while (timeout-- > 0)
+ down_read(&chip->shutdown_rwsem);
+ while (timeout-- > 0) {
+ if (chip->shutdown)
+ break;
+ idx = snd_usb_ctrl_intf(chip) | (cval->id << 8);
if (snd_usb_ctl_msg(chip->dev,
usb_sndctrlpipe(chip->dev, 0), request,
USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_OUT,
- validx, snd_usb_ctrl_intf(chip) | (cval->id << 8),
- buf, val_len) >= 0) {
- snd_usb_autosuspend(chip);
- return 0;
+ validx, idx, buf, val_len) >= 0) {
+ err = 0;
+ goto out;
}
- snd_usb_autosuspend(chip);
+ }
snd_printdd(KERN_ERR "cannot set ctl value: req = %#x, wValue = %#x, wIndex = %#x, type = %d, data = %#x/%#x\n",
- request, validx, snd_usb_ctrl_intf(chip) | (cval->id << 8), cval->val_type, buf[0], buf[1]);
- return -EINVAL;
+ request, validx, idx, cval->val_type, buf[0], buf[1]);
+ err = -EINVAL;
+
+ out:
+ up_read(&chip->shutdown_rwsem);
+ snd_usb_autosuspend(chip);
+ return err;
}
static int set_cur_ctl_value(struct usb_mixer_elem_info *cval, int validx, int value)
diff --git a/sound/usb/mixer_quirks.c b/sound/usb/mixer_quirks.c
index 690000d..ae2b714 100644
--- a/sound/usb/mixer_quirks.c
+++ b/sound/usb/mixer_quirks.c
@@ -283,6 +283,11 @@
if (value > 1)
return -EINVAL;
changed = value != mixer->audigy2nx_leds[index];
+ down_read(&mixer->chip->shutdown_rwsem);
+ if (mixer->chip->shutdown) {
+ err = -ENODEV;
+ goto out;
+ }
if (mixer->chip->usb_id == USB_ID(0x041e, 0x3042))
err = snd_usb_ctl_msg(mixer->chip->dev,
usb_sndctrlpipe(mixer->chip->dev, 0), 0x24,
@@ -299,6 +304,8 @@
usb_sndctrlpipe(mixer->chip->dev, 0), 0x24,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_OTHER,
value, index + 2, NULL, 0);
+ out:
+ up_read(&mixer->chip->shutdown_rwsem);
if (err < 0)
return err;
mixer->audigy2nx_leds[index] = value;
@@ -392,11 +399,16 @@
for (i = 0; jacks[i].name; ++i) {
snd_iprintf(buffer, "%s: ", jacks[i].name);
- err = snd_usb_ctl_msg(mixer->chip->dev,
+ down_read(&mixer->chip->shutdown_rwsem);
+ if (mixer->chip->shutdown)
+ err = 0;
+ else
+ err = snd_usb_ctl_msg(mixer->chip->dev,
usb_rcvctrlpipe(mixer->chip->dev, 0),
UAC_GET_MEM, USB_DIR_IN | USB_TYPE_CLASS |
USB_RECIP_INTERFACE, 0,
jacks[i].unitid << 8, buf, 3);
+ up_read(&mixer->chip->shutdown_rwsem);
if (err == 3 && (buf[0] == 3 || buf[0] == 6))
snd_iprintf(buffer, "%02x %02x\n", buf[1], buf[2]);
else
@@ -426,10 +438,15 @@
else
new_status = old_status & ~0x02;
changed = new_status != old_status;
- err = snd_usb_ctl_msg(mixer->chip->dev,
+ down_read(&mixer->chip->shutdown_rwsem);
+ if (mixer->chip->shutdown)
+ err = -ENODEV;
+ else
+ err = snd_usb_ctl_msg(mixer->chip->dev,
usb_sndctrlpipe(mixer->chip->dev, 0), 0x08,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_OTHER,
50, 0, &new_status, 1);
+ up_read(&mixer->chip->shutdown_rwsem);
if (err < 0)
return err;
mixer->xonar_u1_status = new_status;
@@ -468,11 +485,17 @@
u8 bRequest = (kcontrol->private_value >> 16) & 0xff;
u16 wIndex = kcontrol->private_value & 0xffff;
u8 tmp;
+ int ret;
- int ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), bRequest,
+ down_read(&mixer->chip->shutdown_rwsem);
+ if (mixer->chip->shutdown)
+ ret = -ENODEV;
+ else
+ ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), bRequest,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
0, cpu_to_le16(wIndex),
&tmp, sizeof(tmp), 1000);
+ up_read(&mixer->chip->shutdown_rwsem);
if (ret < 0) {
snd_printk(KERN_ERR
@@ -493,11 +516,17 @@
u8 bRequest = (kcontrol->private_value >> 16) & 0xff;
u16 wIndex = kcontrol->private_value & 0xffff;
u16 wValue = ucontrol->value.integer.value[0];
+ int ret;
- int ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), bRequest,
+ down_read(&mixer->chip->shutdown_rwsem);
+ if (mixer->chip->shutdown)
+ ret = -ENODEV;
+ else
+ ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), bRequest,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
cpu_to_le16(wValue), cpu_to_le16(wIndex),
NULL, 0, 1000);
+ up_read(&mixer->chip->shutdown_rwsem);
if (ret < 0) {
snd_printk(KERN_ERR
@@ -656,11 +685,16 @@
return -EINVAL;
- err = snd_usb_ctl_msg(chip->dev,
+ down_read(&mixer->chip->shutdown_rwsem);
+ if (mixer->chip->shutdown)
+ err = -ENODEV;
+ else
+ err = snd_usb_ctl_msg(chip->dev,
usb_rcvctrlpipe(chip->dev, 0), UAC_GET_CUR,
USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN,
validx << 8, snd_usb_ctrl_intf(chip) | (id << 8),
value, val_len);
+ up_read(&mixer->chip->shutdown_rwsem);
if (err < 0)
return err;
@@ -703,11 +737,16 @@
if (!pval->is_cached) {
/* Read current value */
- err = snd_usb_ctl_msg(chip->dev,
+ down_read(&mixer->chip->shutdown_rwsem);
+ if (mixer->chip->shutdown)
+ err = -ENODEV;
+ else
+ err = snd_usb_ctl_msg(chip->dev,
usb_rcvctrlpipe(chip->dev, 0), UAC_GET_CUR,
USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN,
validx << 8, snd_usb_ctrl_intf(chip) | (id << 8),
value, val_len);
+ up_read(&mixer->chip->shutdown_rwsem);
if (err < 0)
return err;
@@ -719,11 +758,16 @@
if (cur_val != new_val) {
value[0] = new_val;
value[1] = 0;
- err = snd_usb_ctl_msg(chip->dev,
+ down_read(&mixer->chip->shutdown_rwsem);
+ if (mixer->chip->shutdown)
+ err = -ENODEV;
+ else
+ err = snd_usb_ctl_msg(chip->dev,
usb_sndctrlpipe(chip->dev, 0), UAC_SET_CUR,
USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_OUT,
validx << 8, snd_usb_ctrl_intf(chip) | (id << 8),
value, val_len);
+ up_read(&mixer->chip->shutdown_rwsem);
if (err < 0)
return err;
diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c
index 55e19e1..ef6fa24 100644
--- a/sound/usb/pcm.c
+++ b/sound/usb/pcm.c
@@ -71,6 +71,8 @@
unsigned int hwptr_done;
subs = (struct snd_usb_substream *)substream->runtime->private_data;
+ if (subs->stream->chip->shutdown)
+ return SNDRV_PCM_POS_XRUN;
spin_lock(&subs->lock);
hwptr_done = subs->hwptr_done;
substream->runtime->delay = snd_usb_pcm_delay(subs,
@@ -444,7 +446,6 @@
{
int ret;
- mutex_lock(&subs->stream->chip->shutdown_mutex);
/* format changed */
stop_endpoints(subs, 0, 0, 0);
ret = snd_usb_endpoint_set_params(subs->data_endpoint,
@@ -455,19 +456,16 @@
subs->cur_audiofmt,
subs->sync_endpoint);
if (ret < 0)
- goto unlock;
+ return ret;
if (subs->sync_endpoint)
- ret = snd_usb_endpoint_set_params(subs->data_endpoint,
+ ret = snd_usb_endpoint_set_params(subs->sync_endpoint,
subs->pcm_format,
subs->channels,
subs->period_bytes,
subs->cur_rate,
subs->cur_audiofmt,
NULL);
-
-unlock:
- mutex_unlock(&subs->stream->chip->shutdown_mutex);
return ret;
}
@@ -505,7 +503,13 @@
return -EINVAL;
}
- if ((ret = set_format(subs, fmt)) < 0)
+ down_read(&subs->stream->chip->shutdown_rwsem);
+ if (subs->stream->chip->shutdown)
+ ret = -ENODEV;
+ else
+ ret = set_format(subs, fmt);
+ up_read(&subs->stream->chip->shutdown_rwsem);
+ if (ret < 0)
return ret;
subs->interface = fmt->iface;
@@ -527,10 +531,12 @@
subs->cur_audiofmt = NULL;
subs->cur_rate = 0;
subs->period_bytes = 0;
- mutex_lock(&subs->stream->chip->shutdown_mutex);
- stop_endpoints(subs, 0, 1, 1);
- deactivate_endpoints(subs);
- mutex_unlock(&subs->stream->chip->shutdown_mutex);
+ down_read(&subs->stream->chip->shutdown_rwsem);
+ if (!subs->stream->chip->shutdown) {
+ stop_endpoints(subs, 0, 1, 1);
+ deactivate_endpoints(subs);
+ }
+ up_read(&subs->stream->chip->shutdown_rwsem);
return snd_pcm_lib_free_vmalloc_buffer(substream);
}
@@ -552,12 +558,22 @@
return -ENXIO;
}
- if (snd_BUG_ON(!subs->data_endpoint))
- return -EIO;
+ down_read(&subs->stream->chip->shutdown_rwsem);
+ if (subs->stream->chip->shutdown) {
+ ret = -ENODEV;
+ goto unlock;
+ }
+ if (snd_BUG_ON(!subs->data_endpoint)) {
+ ret = -EIO;
+ goto unlock;
+ }
+
+ snd_usb_endpoint_sync_pending_stop(subs->sync_endpoint);
+ snd_usb_endpoint_sync_pending_stop(subs->data_endpoint);
ret = set_format(subs, subs->cur_audiofmt);
if (ret < 0)
- return ret;
+ goto unlock;
iface = usb_ifnum_to_if(subs->dev, subs->cur_audiofmt->iface);
alts = &iface->altsetting[subs->cur_audiofmt->altset_idx];
@@ -567,12 +583,12 @@
subs->cur_audiofmt,
subs->cur_rate);
if (ret < 0)
- return ret;
+ goto unlock;
if (subs->need_setup_ep) {
ret = configure_endpoint(subs);
if (ret < 0)
- return ret;
+ goto unlock;
subs->need_setup_ep = false;
}
@@ -592,9 +608,11 @@
/* for playback, submit the URBs now; otherwise, the first hwptr_done
* updates for all URBs would happen at the same time when starting */
if (subs->direction == SNDRV_PCM_STREAM_PLAYBACK)
- return start_endpoints(subs, 1);
+ ret = start_endpoints(subs, 1);
- return 0;
+ unlock:
+ up_read(&subs->stream->chip->shutdown_rwsem);
+ return ret;
}
static struct snd_pcm_hardware snd_usb_hardware =
@@ -647,7 +665,7 @@
return 0;
}
/* check whether the period time is >= the data packet interval */
- if (snd_usb_get_speed(subs->dev) != USB_SPEED_FULL) {
+ if (subs->speed != USB_SPEED_FULL) {
ptime = 125 * (1 << fp->datainterval);
if (ptime > pt->max || (ptime == pt->max && pt->openmax)) {
hwc_debug(" > check: ptime %u > max %u\n", ptime, pt->max);
@@ -925,7 +943,7 @@
return err;
param_period_time_if_needed = SNDRV_PCM_HW_PARAM_PERIOD_TIME;
- if (snd_usb_get_speed(subs->dev) == USB_SPEED_FULL)
+ if (subs->speed == USB_SPEED_FULL)
/* full speed devices have fixed data packet interval */
ptmin = 1000;
if (ptmin == 1000)
diff --git a/sound/usb/proc.c b/sound/usb/proc.c
index ebc1a5b..d218f76 100644
--- a/sound/usb/proc.c
+++ b/sound/usb/proc.c
@@ -108,7 +108,7 @@
}
snd_iprintf(buffer, "\n");
}
- if (snd_usb_get_speed(subs->dev) != USB_SPEED_FULL)
+ if (subs->speed != USB_SPEED_FULL)
snd_iprintf(buffer, " Data packet interval: %d us\n",
125 * (1 << fp->datainterval));
// snd_iprintf(buffer, " Max Packet Size = %d\n", fp->maxpacksize);
@@ -124,7 +124,7 @@
return;
snd_iprintf(buffer, " Packet Size = %d\n", ep->curpacksize);
snd_iprintf(buffer, " Momentary freq = %u Hz (%#x.%04x)\n",
- snd_usb_get_speed(subs->dev) == USB_SPEED_FULL
+ subs->speed == USB_SPEED_FULL
? get_full_speed_hz(ep->freqm)
: get_high_speed_hz(ep->freqm),
ep->freqm >> 16, ep->freqm & 0xffff);
diff --git a/sound/usb/stream.c b/sound/usb/stream.c
index 083ed81..1de0c8c 100644
--- a/sound/usb/stream.c
+++ b/sound/usb/stream.c
@@ -90,6 +90,7 @@
subs->direction = stream;
subs->dev = as->chip->dev;
subs->txfr_quirk = as->chip->txfr_quirk;
+ subs->speed = snd_usb_get_speed(subs->dev);
snd_usb_set_pcm_ops(as->pcm, stream);
diff --git a/sound/usb/usbaudio.h b/sound/usb/usbaudio.h
index b8233eb..ef42797 100644
--- a/sound/usb/usbaudio.h
+++ b/sound/usb/usbaudio.h
@@ -37,7 +37,7 @@
struct usb_interface *pm_intf;
u32 usb_id;
struct mutex mutex;
- struct mutex shutdown_mutex;
+ struct rw_semaphore shutdown_rwsem;
unsigned int shutdown:1;
unsigned int probing:1;
unsigned int autosuspended:1;
diff --git a/tools/perf/builtin-help.c b/tools/perf/builtin-help.c
index 411ee56..178b88a 100644
--- a/tools/perf/builtin-help.c
+++ b/tools/perf/builtin-help.c
@@ -414,7 +414,7 @@
int cmd_help(int argc, const char **argv, const char *prefix __maybe_unused)
{
bool show_all = false;
- enum help_format help_format = HELP_FORMAT_NONE;
+ enum help_format help_format = HELP_FORMAT_MAN;
struct option builtin_help_options[] = {
OPT_BOOLEAN('a', "all", &show_all, "print all available commands"),
OPT_SET_UINT('m', "man", &help_format, "show man page", HELP_FORMAT_MAN),
diff --git a/tools/perf/builtin-trace.c b/tools/perf/builtin-trace.c
index dec8ced6..7aaee39 100644
--- a/tools/perf/builtin-trace.c
+++ b/tools/perf/builtin-trace.c
@@ -56,6 +56,10 @@
{
char tp_name[128];
struct syscall *sc;
+ const char *name = audit_syscall_to_name(id, trace->audit_machine);
+
+ if (name == NULL)
+ return -1;
if (id > trace->syscalls.max) {
struct syscall *nsyscalls = realloc(trace->syscalls.table, (id + 1) * sizeof(*sc));
@@ -75,11 +79,8 @@
}
sc = trace->syscalls.table + id;
- sc->name = audit_syscall_to_name(id, trace->audit_machine);
- if (sc->name == NULL)
- return -1;
-
- sc->fmt = syscall_fmt__find(sc->name);
+ sc->name = name;
+ sc->fmt = syscall_fmt__find(sc->name);
snprintf(tp_name, sizeof(tp_name), "sys_enter_%s", sc->name);
sc->tp_format = event_format__new("syscalls", tp_name);
@@ -267,6 +268,13 @@
if (evlist->threads->map[0] == -1 || evlist->threads->nr > 1)
printf("%d ", sample.tid);
+ if (sample.raw_data == NULL) {
+ printf("%s sample with no payload for tid: %d, cpu %d, raw_size=%d, skipping...\n",
+ perf_evsel__name(evsel), sample.tid,
+ sample.cpu, sample.raw_size);
+ continue;
+ }
+
handler = evsel->handler.func;
handler(trace, evsel, &sample);
}
diff --git a/tools/perf/util/parse-events-test.c b/tools/perf/util/parse-events-test.c
index 28c18d1..516ecd9 100644
--- a/tools/perf/util/parse-events-test.c
+++ b/tools/perf/util/parse-events-test.c
@@ -513,7 +513,8 @@
TEST_ASSERT_VAL("wrong exclude_user", !evsel->attr.exclude_user);
TEST_ASSERT_VAL("wrong exclude_kernel", evsel->attr.exclude_kernel);
TEST_ASSERT_VAL("wrong exclude_hv", evsel->attr.exclude_hv);
- TEST_ASSERT_VAL("wrong exclude guest", !evsel->attr.exclude_guest);
+ /* use of precise requires exclude_guest */
+ TEST_ASSERT_VAL("wrong exclude guest", evsel->attr.exclude_guest);
TEST_ASSERT_VAL("wrong exclude host", !evsel->attr.exclude_host);
TEST_ASSERT_VAL("wrong precise_ip", evsel->attr.precise_ip == 2);
TEST_ASSERT_VAL("wrong leader", evsel->leader == leader);
@@ -599,7 +600,8 @@
TEST_ASSERT_VAL("wrong exclude_user", evsel->attr.exclude_user);
TEST_ASSERT_VAL("wrong exclude_kernel", !evsel->attr.exclude_kernel);
TEST_ASSERT_VAL("wrong exclude_hv", evsel->attr.exclude_hv);
- TEST_ASSERT_VAL("wrong exclude guest", !evsel->attr.exclude_guest);
+ /* use of precise requires exclude_guest */
+ TEST_ASSERT_VAL("wrong exclude guest", evsel->attr.exclude_guest);
TEST_ASSERT_VAL("wrong exclude host", !evsel->attr.exclude_host);
TEST_ASSERT_VAL("wrong precise_ip", evsel->attr.precise_ip == 3);
TEST_ASSERT_VAL("wrong leader", evsel->leader == leader);
@@ -662,7 +664,8 @@
TEST_ASSERT_VAL("wrong exclude_user", !evsel->attr.exclude_user);
TEST_ASSERT_VAL("wrong exclude_kernel", evsel->attr.exclude_kernel);
TEST_ASSERT_VAL("wrong exclude_hv", evsel->attr.exclude_hv);
- TEST_ASSERT_VAL("wrong exclude guest", !evsel->attr.exclude_guest);
+ /* use of precise requires exclude_guest */
+ TEST_ASSERT_VAL("wrong exclude guest", evsel->attr.exclude_guest);
TEST_ASSERT_VAL("wrong exclude host", !evsel->attr.exclude_host);
TEST_ASSERT_VAL("wrong precise_ip", evsel->attr.precise_ip == 1);
TEST_ASSERT_VAL("wrong group name", !evsel->group_name);
@@ -676,7 +679,8 @@
TEST_ASSERT_VAL("wrong exclude_user", evsel->attr.exclude_user);
TEST_ASSERT_VAL("wrong exclude_kernel", !evsel->attr.exclude_kernel);
TEST_ASSERT_VAL("wrong exclude_hv", evsel->attr.exclude_hv);
- TEST_ASSERT_VAL("wrong exclude guest", !evsel->attr.exclude_guest);
+ /* use of precise requires exclude_guest */
+ TEST_ASSERT_VAL("wrong exclude guest", evsel->attr.exclude_guest);
TEST_ASSERT_VAL("wrong exclude host", !evsel->attr.exclude_host);
TEST_ASSERT_VAL("wrong precise_ip", evsel->attr.precise_ip == 2);
TEST_ASSERT_VAL("wrong leader", evsel->leader == leader);
diff --git a/tools/perf/util/thread.c b/tools/perf/util/thread.c
index fb4b7ea..8b3e5939 100644
--- a/tools/perf/util/thread.c
+++ b/tools/perf/util/thread.c
@@ -39,7 +39,6 @@
err = self->comm == NULL ? -ENOMEM : 0;
if (!err) {
self->comm_set = true;
- map_groups__flush(&self->mg);
}
return err;
}
diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c
index 2655ae9..ea095ab 100644
--- a/tools/power/x86/turbostat/turbostat.c
+++ b/tools/power/x86/turbostat/turbostat.c
@@ -206,8 +206,10 @@
retval = pread(fd, msr, sizeof *msr, offset);
close(fd);
- if (retval != sizeof *msr)
+ if (retval != sizeof *msr) {
+ fprintf(stderr, "%s offset 0x%zx read failed\n", pathname, offset);
return -1;
+ }
return 0;
}
@@ -1101,7 +1103,9 @@
restart:
retval = for_all_cpus(get_counters, EVEN_COUNTERS);
- if (retval) {
+ if (retval < -1) {
+ exit(retval);
+ } else if (retval == -1) {
re_initialize();
goto restart;
}
@@ -1114,7 +1118,9 @@
}
sleep(interval_sec);
retval = for_all_cpus(get_counters, ODD_COUNTERS);
- if (retval) {
+ if (retval < -1) {
+ exit(retval);
+ } else if (retval == -1) {
re_initialize();
goto restart;
}
@@ -1126,7 +1132,9 @@
flush_stdout();
sleep(interval_sec);
retval = for_all_cpus(get_counters, EVEN_COUNTERS);
- if (retval) {
+ if (retval < -1) {
+ exit(retval);
+ } else if (retval == -1) {
re_initialize();
goto restart;
}
@@ -1545,8 +1553,11 @@
int fork_it(char **argv)
{
pid_t child_pid;
+ int status;
- for_all_cpus(get_counters, EVEN_COUNTERS);
+ status = for_all_cpus(get_counters, EVEN_COUNTERS);
+ if (status)
+ exit(status);
/* clear affinity side-effect of get_counters() */
sched_setaffinity(0, cpu_present_setsize, cpu_present_set);
gettimeofday(&tv_even, (struct timezone *)NULL);
@@ -1556,7 +1567,6 @@
/* child */
execvp(argv[0], argv);
} else {
- int status;
/* parent */
if (child_pid == -1) {
@@ -1568,7 +1578,7 @@
signal(SIGQUIT, SIG_IGN);
if (waitpid(child_pid, &status, 0) == -1) {
perror("wait");
- exit(1);
+ exit(status);
}
}
/*
@@ -1585,7 +1595,7 @@
fprintf(stderr, "%.6f sec\n", tv_delta.tv_sec + tv_delta.tv_usec/1000000.0);
- return 0;
+ return status;
}
void cmdline(int argc, char **argv)
@@ -1594,7 +1604,7 @@
progname = argv[0];
- while ((opt = getopt(argc, argv, "+pPSvisc:sC:m:M:")) != -1) {
+ while ((opt = getopt(argc, argv, "+pPSvi:sc:sC:m:M:")) != -1) {
switch (opt) {
case 'p':
show_core_only++;
diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl
index b51d787..c7ba761 100755
--- a/tools/testing/ktest/ktest.pl
+++ b/tools/testing/ktest/ktest.pl
@@ -1740,8 +1740,10 @@
open(IN, "$output_config") or dodie("Can't read config file");
while (<IN>) {
if (/CONFIG_MODULES(=y)?/) {
- $install_mods = 1 if (defined($1));
- last;
+ if (defined($1)) {
+ $install_mods = 1;
+ last;
+ }
}
}
close(IN);
diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile
index 4348014..85baf11 100644
--- a/tools/testing/selftests/Makefile
+++ b/tools/testing/selftests/Makefile
@@ -1,4 +1,4 @@
-TARGETS = breakpoints kcmp mqueue vm cpu-hotplug memory-hotplug epoll
+TARGETS = breakpoints kcmp mqueue vm cpu-hotplug memory-hotplug
all:
for TARGET in $(TARGETS); do \
diff --git a/tools/testing/selftests/epoll/Makefile b/tools/testing/selftests/epoll/Makefile
deleted file mode 100644
index 19806ed..0000000
--- a/tools/testing/selftests/epoll/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-# Makefile for epoll selftests
-
-all: test_epoll
-%: %.c
- gcc -pthread -g -o $@ $^
-
-run_tests: all
- ./test_epoll
-
-clean:
- $(RM) test_epoll
diff --git a/tools/testing/selftests/epoll/test_epoll.c b/tools/testing/selftests/epoll/test_epoll.c
deleted file mode 100644
index e0fcff1e..0000000
--- a/tools/testing/selftests/epoll/test_epoll.c
+++ /dev/null
@@ -1,344 +0,0 @@
-/*
- * tools/testing/selftests/epoll/test_epoll.c
- *
- * Copyright 2012 Adobe Systems Incorporated
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * Paton J. Lewis <palewis@adobe.com>
- *
- */
-
-#include <errno.h>
-#include <fcntl.h>
-#include <pthread.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <sys/epoll.h>
-#include <sys/socket.h>
-
-/*
- * A pointer to an epoll_item_private structure will be stored in the epoll
- * item's event structure so that we can get access to the epoll_item_private
- * data after calling epoll_wait:
- */
-struct epoll_item_private {
- int index; /* Position of this struct within the epoll_items array. */
- int fd;
- uint32_t events;
- pthread_mutex_t mutex; /* Guards the following variables... */
- int stop;
- int status; /* Stores any error encountered while handling item. */
- /* The following variable allows us to test whether we have encountered
- a problem while attempting to cancel and delete the associated
- event. When the test program exits, 'deleted' should be exactly
- one. If it is greater than one, then the failed test reflects a real
- world situation where we would have tried to access the epoll item's
- private data after deleting it: */
- int deleted;
-};
-
-struct epoll_item_private *epoll_items;
-
-/*
- * Delete the specified item from the epoll set. In a real-world secneario this
- * is where we would free the associated data structure, but in this testing
- * environment we retain the structure so that we can test for double-deletion:
- */
-void delete_item(int index)
-{
- __sync_fetch_and_add(&epoll_items[index].deleted, 1);
-}
-
-/*
- * A pointer to a read_thread_data structure will be passed as the argument to
- * each read thread:
- */
-struct read_thread_data {
- int stop;
- int status; /* Indicates any error encountered by the read thread. */
- int epoll_set;
-};
-
-/*
- * The function executed by the read threads:
- */
-void *read_thread_function(void *function_data)
-{
- struct read_thread_data *thread_data =
- (struct read_thread_data *)function_data;
- struct epoll_event event_data;
- struct epoll_item_private *item_data;
- char socket_data;
-
- /* Handle events until we encounter an error or this thread's 'stop'
- condition is set: */
- while (1) {
- int result = epoll_wait(thread_data->epoll_set,
- &event_data,
- 1, /* Number of desired events */
- 1000); /* Timeout in ms */
- if (result < 0) {
- /* Breakpoints signal all threads. Ignore that while
- debugging: */
- if (errno == EINTR)
- continue;
- thread_data->status = errno;
- return 0;
- } else if (thread_data->stop)
- return 0;
- else if (result == 0) /* Timeout */
- continue;
-
- /* We need the mutex here because checking for the stop
- condition and re-enabling the epoll item need to be done
- together as one atomic operation when EPOLL_CTL_DISABLE is
- available: */
- item_data = (struct epoll_item_private *)event_data.data.ptr;
- pthread_mutex_lock(&item_data->mutex);
-
- /* Remove the item from the epoll set if we want to stop
- handling that event: */
- if (item_data->stop)
- delete_item(item_data->index);
- else {
- /* Clear the data that was written to the other end of
- our non-blocking socket: */
- do {
- if (read(item_data->fd, &socket_data, 1) < 1) {
- if ((errno == EAGAIN) ||
- (errno == EWOULDBLOCK))
- break;
- else
- goto error_unlock;
- }
- } while (item_data->events & EPOLLET);
-
- /* The item was one-shot, so re-enable it: */
- event_data.events = item_data->events;
- if (epoll_ctl(thread_data->epoll_set,
- EPOLL_CTL_MOD,
- item_data->fd,
- &event_data) < 0)
- goto error_unlock;
- }
-
- pthread_mutex_unlock(&item_data->mutex);
- }
-
-error_unlock:
- thread_data->status = item_data->status = errno;
- pthread_mutex_unlock(&item_data->mutex);
- return 0;
-}
-
-/*
- * A pointer to a write_thread_data structure will be passed as the argument to
- * the write thread:
- */
-struct write_thread_data {
- int stop;
- int status; /* Indicates any error encountered by the write thread. */
- int n_fds;
- int *fds;
-};
-
-/*
- * The function executed by the write thread. It writes a single byte to each
- * socket in turn until the stop condition for this thread is set. If writing to
- * a socket would block (i.e. errno was EAGAIN), we leave that socket alone for
- * the moment and just move on to the next socket in the list. We don't care
- * about the order in which we deliver events to the epoll set. In fact we don't
- * care about the data we're writing to the pipes at all; we just want to
- * trigger epoll events:
- */
-void *write_thread_function(void *function_data)
-{
- const char data = 'X';
- int index;
- struct write_thread_data *thread_data =
- (struct write_thread_data *)function_data;
- while (!write_thread_data->stop)
- for (index = 0;
- !thread_data->stop && (index < thread_data->n_fds);
- ++index)
- if ((write(thread_data->fds[index], &data, 1) < 1) &&
- (errno != EAGAIN) &&
- (errno != EWOULDBLOCK)) {
- write_thread_data->status = errno;
- return;
- }
-}
-
-/*
- * Arguments are currently ignored:
- */
-int main(int argc, char **argv)
-{
- const int n_read_threads = 100;
- const int n_epoll_items = 500;
- int index;
- int epoll_set = epoll_create1(0);
- struct write_thread_data write_thread_data = {
- 0, 0, n_epoll_items, malloc(n_epoll_items * sizeof(int))
- };
- struct read_thread_data *read_thread_data =
- malloc(n_read_threads * sizeof(struct read_thread_data));
- pthread_t *read_threads = malloc(n_read_threads * sizeof(pthread_t));
- pthread_t write_thread;
-
- printf("-----------------\n");
- printf("Runing test_epoll\n");
- printf("-----------------\n");
-
- epoll_items = malloc(n_epoll_items * sizeof(struct epoll_item_private));
-
- if (epoll_set < 0 || epoll_items == 0 || write_thread_data.fds == 0 ||
- read_thread_data == 0 || read_threads == 0)
- goto error;
-
- if (sysconf(_SC_NPROCESSORS_ONLN) < 2) {
- printf("Error: please run this test on a multi-core system.\n");
- goto error;
- }
-
- /* Create the socket pairs and epoll items: */
- for (index = 0; index < n_epoll_items; ++index) {
- int socket_pair[2];
- struct epoll_event event_data;
- if (socketpair(AF_UNIX,
- SOCK_STREAM | SOCK_NONBLOCK,
- 0,
- socket_pair) < 0)
- goto error;
- write_thread_data.fds[index] = socket_pair[0];
- epoll_items[index].index = index;
- epoll_items[index].fd = socket_pair[1];
- if (pthread_mutex_init(&epoll_items[index].mutex, NULL) != 0)
- goto error;
- /* We always use EPOLLONESHOT because this test is currently
- structured to demonstrate the need for EPOLL_CTL_DISABLE,
- which only produces useful information in the EPOLLONESHOT
- case (without EPOLLONESHOT, calling epoll_ctl with
- EPOLL_CTL_DISABLE will never return EBUSY). If support for
- testing events without EPOLLONESHOT is desired, it should
- probably be implemented in a separate unit test. */
- epoll_items[index].events = EPOLLIN | EPOLLONESHOT;
- if (index < n_epoll_items / 2)
- epoll_items[index].events |= EPOLLET;
- epoll_items[index].stop = 0;
- epoll_items[index].status = 0;
- epoll_items[index].deleted = 0;
- event_data.events = epoll_items[index].events;
- event_data.data.ptr = &epoll_items[index];
- if (epoll_ctl(epoll_set,
- EPOLL_CTL_ADD,
- epoll_items[index].fd,
- &event_data) < 0)
- goto error;
- }
-
- /* Create and start the read threads: */
- for (index = 0; index < n_read_threads; ++index) {
- read_thread_data[index].stop = 0;
- read_thread_data[index].status = 0;
- read_thread_data[index].epoll_set = epoll_set;
- if (pthread_create(&read_threads[index],
- NULL,
- read_thread_function,
- &read_thread_data[index]) != 0)
- goto error;
- }
-
- if (pthread_create(&write_thread,
- NULL,
- write_thread_function,
- &write_thread_data) != 0)
- goto error;
-
- /* Cancel all event pollers: */
-#ifdef EPOLL_CTL_DISABLE
- for (index = 0; index < n_epoll_items; ++index) {
- pthread_mutex_lock(&epoll_items[index].mutex);
- ++epoll_items[index].stop;
- if (epoll_ctl(epoll_set,
- EPOLL_CTL_DISABLE,
- epoll_items[index].fd,
- NULL) == 0)
- delete_item(index);
- else if (errno != EBUSY) {
- pthread_mutex_unlock(&epoll_items[index].mutex);
- goto error;
- }
- /* EBUSY means events were being handled; allow the other thread
- to delete the item. */
- pthread_mutex_unlock(&epoll_items[index].mutex);
- }
-#else
- for (index = 0; index < n_epoll_items; ++index) {
- pthread_mutex_lock(&epoll_items[index].mutex);
- ++epoll_items[index].stop;
- pthread_mutex_unlock(&epoll_items[index].mutex);
- /* Wait in case a thread running read_thread_function is
- currently executing code between epoll_wait and
- pthread_mutex_lock with this item. Note that a longer delay
- would make double-deletion less likely (at the expense of
- performance), but there is no guarantee that any delay would
- ever be sufficient. Note also that we delete all event
- pollers at once for testing purposes, but in a real-world
- environment we are likely to want to be able to cancel event
- pollers at arbitrary times. Therefore we can't improve this
- situation by just splitting this loop into two loops
- (i.e. signal 'stop' for all items, sleep, and then delete all
- items). We also can't fix the problem via EPOLL_CTL_DEL
- because that command can't prevent the case where some other
- thread is executing read_thread_function within the region
- mentioned above: */
- usleep(1);
- pthread_mutex_lock(&epoll_items[index].mutex);
- if (!epoll_items[index].deleted)
- delete_item(index);
- pthread_mutex_unlock(&epoll_items[index].mutex);
- }
-#endif
-
- /* Shut down the read threads: */
- for (index = 0; index < n_read_threads; ++index)
- __sync_fetch_and_add(&read_thread_data[index].stop, 1);
- for (index = 0; index < n_read_threads; ++index) {
- if (pthread_join(read_threads[index], NULL) != 0)
- goto error;
- if (read_thread_data[index].status)
- goto error;
- }
-
- /* Shut down the write thread: */
- __sync_fetch_and_add(&write_thread_data.stop, 1);
- if ((pthread_join(write_thread, NULL) != 0) || write_thread_data.status)
- goto error;
-
- /* Check for final error conditions: */
- for (index = 0; index < n_epoll_items; ++index) {
- if (epoll_items[index].status != 0)
- goto error;
- if (pthread_mutex_destroy(&epoll_items[index].mutex) < 0)
- goto error;
- }
- for (index = 0; index < n_epoll_items; ++index)
- if (epoll_items[index].deleted != 1) {
- printf("Error: item data deleted %1d times.\n",
- epoll_items[index].deleted);
- goto error;
- }
-
- printf("[PASS]\n");
- return 0;
-
- error:
- printf("[FAIL]\n");
- return errno;
-}
diff --git a/tools/vm/page-types.c b/tools/vm/page-types.c
index cd1b03e..b76edf2 100644
--- a/tools/vm/page-types.c
+++ b/tools/vm/page-types.c
@@ -35,7 +35,7 @@
#include <sys/mount.h>
#include <sys/statfs.h>
#include "../../include/uapi/linux/magic.h"
-#include "../../include/linux/kernel-page-flags.h"
+#include "../../include/uapi/linux/kernel-page-flags.h"
#ifndef MAX_PATH
diff --git a/usr/gen_init_cpio.c b/usr/gen_init_cpio.c
index af0f22f..aca6edc 100644
--- a/usr/gen_init_cpio.c
+++ b/usr/gen_init_cpio.c
@@ -303,7 +303,7 @@
int retval;
int rc = -1;
int namesize;
- int i;
+ unsigned int i;
mode |= S_IFREG;
@@ -381,25 +381,28 @@
static char *cpio_replace_env(char *new_location)
{
- char expanded[PATH_MAX + 1];
- char env_var[PATH_MAX + 1];
- char *start;
- char *end;
+ char expanded[PATH_MAX + 1];
+ char env_var[PATH_MAX + 1];
+ char *start;
+ char *end;
- for (start = NULL; (start = strstr(new_location, "${")); ) {
- end = strchr(start, '}');
- if (start < end) {
- *env_var = *expanded = '\0';
- strncat(env_var, start + 2, end - start - 2);
- strncat(expanded, new_location, start - new_location);
- strncat(expanded, getenv(env_var), PATH_MAX);
- strncat(expanded, end + 1, PATH_MAX);
- strncpy(new_location, expanded, PATH_MAX);
- } else
- break;
- }
+ for (start = NULL; (start = strstr(new_location, "${")); ) {
+ end = strchr(start, '}');
+ if (start < end) {
+ *env_var = *expanded = '\0';
+ strncat(env_var, start + 2, end - start - 2);
+ strncat(expanded, new_location, start - new_location);
+ strncat(expanded, getenv(env_var),
+ PATH_MAX - strlen(expanded));
+ strncat(expanded, end + 1,
+ PATH_MAX - strlen(expanded));
+ strncpy(new_location, expanded, PATH_MAX);
+ new_location[PATH_MAX] = 0;
+ } else
+ break;
+ }
- return new_location;
+ return new_location;
}
diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c
index e59bb63..be70035 100644
--- a/virt/kvm/kvm_main.c
+++ b/virt/kvm/kvm_main.c
@@ -1322,9 +1322,7 @@
void kvm_release_pfn_clean(pfn_t pfn)
{
- WARN_ON(is_error_pfn(pfn));
-
- if (!kvm_is_mmio_pfn(pfn))
+ if (!is_error_pfn(pfn) && !kvm_is_mmio_pfn(pfn))
put_page(pfn_to_page(pfn));
}
EXPORT_SYMBOL_GPL(kvm_release_pfn_clean);
