| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/net/bluetooth/ti,bluetooth.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: Texas Instruments Bluetooth Chips |
| |
| maintainers: |
| - David Lechner <david@lechnology.com> |
| |
| description: | |
| This documents the binding structure and common properties for serial |
| attached TI Bluetooth devices. The following chips are included in this |
| binding: |
| |
| * TI CC256x Bluetooth devices |
| * TI WiLink 7/8 (wl12xx/wl18xx) Shared Transport BT/FM/GPS devices |
| |
| TI WiLink devices have a UART interface for providing Bluetooth, FM radio, |
| and GPS over what's called "shared transport". The shared transport is |
| standard BT HCI protocol with additional channels for the other functions. |
| |
| TI WiLink devices also have a separate WiFi interface as described in |
| wireless/ti,wlcore.yaml. |
| |
| This bindings follows the UART slave device binding in ../serial/serial.yaml. |
| |
| properties: |
| compatible: |
| enum: |
| - ti,cc2560 |
| - ti,wl1271-st |
| - ti,wl1273-st |
| - ti,wl1281-st |
| - ti,wl1283-st |
| - ti,wl1285-st |
| - ti,wl1801-st |
| - ti,wl1805-st |
| - ti,wl1807-st |
| - ti,wl1831-st |
| - ti,wl1835-st |
| - ti,wl1837-st |
| |
| enable-gpios: |
| maxItems: 1 |
| |
| vio-supply: |
| description: Vio input supply (1.8V) |
| |
| vbat-supply: |
| description: Vbat input supply (2.9-4.8V) |
| |
| clocks: |
| maxItems: 1 |
| |
| clock-names: |
| items: |
| - const: ext_clock |
| |
| max-speed: |
| default: 3000000 |
| |
| nvmem-cells: |
| maxItems: 1 |
| description: |
| Nvmem data cell that contains a 6 byte BD address with the most |
| significant byte first (big-endian). |
| |
| nvmem-cell-names: |
| items: |
| - const: bd-address |
| |
| required: |
| - compatible |
| |
| allOf: |
| - $ref: /schemas/serial/serial-peripheral-props.yaml# |
| |
| additionalProperties: false |
| |
| examples: |
| - | |
| #include <dt-bindings/gpio/gpio.h> |
| |
| serial { |
| bluetooth { |
| compatible = "ti,wl1835-st"; |
| enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; |
| clocks = <&clk32k_wl18xx>; |
| clock-names = "ext_clock"; |
| nvmem-cells = <&bd_address>; |
| nvmem-cell-names = "bd-address"; |
| }; |
| }; |
