Binding for Texas Instruments gate clock.

This binding uses the common clock binding[1]. This clock is
quite much similar to the basic gate-clock [2], however,
it supports a number of additional features. If no register
is provided for this clock, the code assumes that a clockdomain
will be controlled instead and the corresponding hw-ops for
that is used.

[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
[2] Documentation/devicetree/bindings/clock/gpio-gate-clock.yaml
[3] Documentation/devicetree/bindings/clock/ti/clockdomain.txt

Required properties:
- compatible : shall be one of:
  "ti,gate-clock" - basic gate clock
  "ti,wait-gate-clock" - gate clock which waits until clock is active before
			 returning from clk_enable()
  "ti,dss-gate-clock" - gate clock with DSS specific hardware handling
  "ti,am35xx-gate-clock" - gate clock with AM35xx specific hardware handling
  "ti,clkdm-gate-clock" - clockdomain gate clock, which derives its functional
			  clock directly from a clockdomain, see [3] how
			  to map clockdomains properly
  "ti,hsdiv-gate-clock" - gate clock with OMAP36xx specific hardware handling,
			  required for a hardware errata
  "ti,composite-gate-clock" - composite gate clock, to be part of composite
			      clock
  "ti,composite-no-wait-gate-clock" - composite gate clock that does not wait
				      for clock to be active before returning
				      from clk_enable()
- #clock-cells : from common clock binding; shall be set to 0
- clocks : link to phandle of parent clock
- reg : offset for register controlling adjustable gate, not needed for
	ti,clkdm-gate-clock type

Optional properties:
- clock-output-names : from common clock binding.
- ti,bit-shift : bit shift for programming the clock gate, invalid for
		 ti,clkdm-gate-clock type
- ti,set-bit-to-disable : inverts default gate programming. Setting the bit
  gates the clock and clearing the bit ungates the clock.

Examples:
	mmchs2_fck: mmchs2_fck@48004a00 {
		#clock-cells = <0>;
		compatible = "ti,gate-clock";
		clocks = <&core_96m_fck>;
		reg = <0x0a00>;
		ti,bit-shift = <25>;
	};

	uart4_fck_am35xx: uart4_fck_am35xx {
		#clock-cells = <0>;
		compatible = "ti,wait-gate-clock";
		clocks = <&core_48m_fck>;
		reg = <0x0a00>;
		ti,bit-shift = <23>;
	};

	dss1_alwon_fck_3430es2: dss1_alwon_fck_3430es2@48004e00 {
		#clock-cells = <0>;
		compatible = "ti,dss-gate-clock";
		clocks = <&dpll4_m4x2_ck>;
		reg = <0x0e00>;
		ti,bit-shift = <0>;
	};

	emac_ick: emac_ick@4800259c {
		#clock-cells = <0>;
		compatible = "ti,am35xx-gate-clock";
		clocks = <&ipss_ick>;
		reg = <0x059c>;
		ti,bit-shift = <1>;
	};

	emu_src_ck: emu_src_ck {
		#clock-cells = <0>;
		compatible = "ti,clkdm-gate-clock";
		clocks = <&emu_src_mux_ck>;
	};

	dpll4_m2x2_ck: dpll4_m2x2_ck@48004d00 {
		#clock-cells = <0>;
		compatible = "ti,hsdiv-gate-clock";
		clocks = <&dpll4_m2x2_mul_ck>;
		ti,bit-shift = <0x1b>;
		reg = <0x0d00>;
		ti,set-bit-to-disable;
	};

	vlynq_gate_fck: vlynq_gate_fck {
		#clock-cells = <0>;
		compatible = "ti,composite-gate-clock";
		clocks = <&core_ck>;
		ti,bit-shift = <3>;
		reg = <0x0200>;
	};

	sys_clkout2_src_gate: sys_clkout2_src_gate {
		#clock-cells = <0>;
		compatible = "ti,composite-no-wait-gate-clock";
		clocks = <&core_ck>;
		ti,bit-shift = <15>;
		reg = <0x0070>;
	};