diff --git a/Documentation/scsi/aacraid.txt b/Documentation/scsi/aacraid.txt
index dc8e44fc..2368e7e 100644
--- a/Documentation/scsi/aacraid.txt
+++ b/Documentation/scsi/aacraid.txt
@@ -37,7 +37,11 @@
 	9005:0286:9005:029d	Adaptec	2420SA (Intruder HP release)
 	9005:0286:9005:02ac	Adaptec	1800 (Typhoon44)
 	9005:0285:9005:02b5	Adaptec	5445 (Voodoo44)
+	9005:0285:15d9:02b5	SMC	AOC-USAS-S4i
+	9005:0285:15d9:02c9	SMC	AOC-USAS-S4iR
 	9005:0285:9005:02b6	Adaptec	5805 (Voodoo80)
+	9005:0285:15d9:02b6	SMC	AOC-USAS-S8i
+	9005:0285:15d9:02ca	SMC	AOC-USAS-S8iR
 	9005:0285:9005:02b7	Adaptec	5085 (Voodoo08)
 	9005:0285:9005:02bb	Adaptec	3405 (Marauder40LP)
 	9005:0285:9005:02bc	Adaptec	3805 (Marauder80LP)
@@ -93,6 +97,9 @@
 	9005:0286:9005:02ae		(Aurora Lite ARK)
 	9005:0285:9005:02b0		(Sunrise Lake ARK)
 	9005:0285:9005:02b1	Adaptec	(Voodoo 8 internal 8 external)
+	9005:0285:108e:7aac	SUN	STK RAID REM (Voodoo44 Coyote)
+	9005:0285:108e:0286	SUN	SG-XPCIESAS-R-IN (Cougar)
+	9005:0285:108e:0287	SUN	SG-XPCIESAS-R-EX (Prometheus)
 
 People
 -------------------------
diff --git a/Documentation/scsi/ncr53c8xx.txt b/Documentation/scsi/ncr53c8xx.txt
index caf10b1..88ef88b 100644
--- a/Documentation/scsi/ncr53c8xx.txt
+++ b/Documentation/scsi/ncr53c8xx.txt
@@ -562,11 +562,6 @@
 support by the driver of this feature at linux start-up and enable
 this feature after boot-up only for devices that support it safely.
 
-CONFIG_SCSI_NCR53C8XX_PROFILE_SUPPORT  (default answer: n)
-    This option must be set for profiling information to be gathered 
-    and printed out through the proc file system. This features may 
-    impact performances.
-
 CONFIG_SCSI_NCR53C8XX_IOMAPPED       (default answer: n)
     Answer "y" if you suspect your mother board to not allow memory mapped I/O.
     May slow down performance a little.  This option is required by
diff --git a/block/ll_rw_blk.c b/block/ll_rw_blk.c
index 123003a..5873861 100644
--- a/block/ll_rw_blk.c
+++ b/block/ll_rw_blk.c
@@ -1925,6 +1925,8 @@
 	blk_queue_max_hw_segments(q, MAX_HW_SEGMENTS);
 	blk_queue_max_phys_segments(q, MAX_PHYS_SEGMENTS);
 
+	q->sg_reserved_size = INT_MAX;
+
 	/*
 	 * all done
 	 */
diff --git a/block/scsi_ioctl.c b/block/scsi_ioctl.c
index 65c6a3c..e83f1db 100644
--- a/block/scsi_ioctl.c
+++ b/block/scsi_ioctl.c
@@ -78,7 +78,9 @@
 
 static int sg_get_reserved_size(request_queue_t *q, int __user *p)
 {
-	return put_user(q->sg_reserved_size, p);
+	unsigned val = min(q->sg_reserved_size, q->max_sectors << 9);
+
+	return put_user(val, p);
 }
 
 static int sg_set_reserved_size(request_queue_t *q, int __user *p)
diff --git a/drivers/infiniband/ulp/iser/iser_initiator.c b/drivers/infiniband/ulp/iser/iser_initiator.c
index 278fcbc..3651072 100644
--- a/drivers/infiniband/ulp/iser/iser_initiator.c
+++ b/drivers/infiniband/ulp/iser/iser_initiator.c
@@ -201,7 +201,7 @@
 	 * what's common for both schemes is that the connection is not started
 	 */
 	if (conn->c_stage != ISCSI_CONN_STARTED)
-		rx_data_size = DEFAULT_MAX_RECV_DATA_SEGMENT_LENGTH;
+		rx_data_size = ISCSI_DEF_MAX_RECV_SEG_LEN;
 	else /* FIXME till user space sets conn->max_recv_dlength correctly */
 		rx_data_size = 128;
 
diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
index 083acfd..97471af 100644
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@@ -1531,6 +1531,7 @@
 	MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
 	u32 device_state = pdev->current_state;
 	int recovery_state;
+	int err;
 
 	printk(MYIOC_s_INFO_FMT
 	"pci-resume: pdev=0x%p, slot=%s, Previous operating state [D%d]\n",
@@ -1538,7 +1539,9 @@
 
 	pci_set_power_state(pdev, 0);
 	pci_restore_state(pdev);
-	pci_enable_device(pdev);
+	err = pci_enable_device(pdev);
+	if (err)
+		return err;
 
 	/* enable interrupts */
 	CHIPREG_WRITE32(&ioc->chip->IntMask, MPI_HIM_DIM);
@@ -4739,12 +4742,8 @@
 }
 
 /**
- * mpt_inactive_raid_list_free
- *
- * This clears this link list.
- *
- * @ioc - pointer to per adapter structure
- *
+ * mpt_inactive_raid_list_free - This clears this link list.
+ * @ioc : pointer to per adapter structure
  **/
 static void
 mpt_inactive_raid_list_free(MPT_ADAPTER *ioc)
@@ -4764,15 +4763,11 @@
 }
 
 /**
- * mpt_inactive_raid_volumes
+ * mpt_inactive_raid_volumes - sets up link list of phy_disk_nums for devices belonging in an inactive volume
  *
- * This sets up link list of phy_disk_nums for devices belonging in an inactive volume
- *
- * @ioc - pointer to per adapter structure
- * @channel - volume channel
- * @id - volume target id
- *
- *
+ * @ioc : pointer to per adapter structure
+ * @channel : volume channel
+ * @id : volume target id
  **/
 static void
 mpt_inactive_raid_volumes(MPT_ADAPTER *ioc, u8 channel, u8 id)
@@ -6663,7 +6658,7 @@
 /**
  *	mpt_iocstatus_info_config - IOCSTATUS information for config pages
  *	@ioc: Pointer to MPT_ADAPTER structure
- *	ioc_status: U32 IOCStatus word from IOC
+ *	@ioc_status: U32 IOCStatus word from IOC
  *	@mf: Pointer to MPT request frame
  *
  *	Refer to lsi/mpi.h.
diff --git a/drivers/message/fusion/mptbase.h b/drivers/message/fusion/mptbase.h
index e3a3927..d25d3be 100644
--- a/drivers/message/fusion/mptbase.h
+++ b/drivers/message/fusion/mptbase.h
@@ -994,6 +994,7 @@
 	int			  scandv_wait_done;
 	long			  last_queue_full;
 	u16			  tm_iocstatus;
+	u16			  spi_pending;
 	struct list_head	  target_reset_list;
 } MPT_SCSI_HOST;
 
diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c
index 2a3e9e66..fa0f776 100644
--- a/drivers/message/fusion/mptscsih.c
+++ b/drivers/message/fusion/mptscsih.c
@@ -819,10 +819,7 @@
 			sc->resid=0;
 		case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR:	/* 0x0040 */
 		case MPI_IOCSTATUS_SUCCESS:			/* 0x0000 */
-			if (scsi_status == MPI_SCSI_STATUS_BUSY)
-				sc->result = (DID_BUS_BUSY << 16) | scsi_status;
-			else
-				sc->result = (DID_OK << 16) | scsi_status;
+			sc->result = (DID_OK << 16) | scsi_status;
 			if (scsi_state == 0) {
 				;
 			} else if (scsi_state & MPI_SCSI_STATE_AUTOSENSE_VALID) {
@@ -1188,20 +1185,7 @@
 int
 mptscsih_resume(struct pci_dev *pdev)
 {
-	MPT_ADAPTER 		*ioc = pci_get_drvdata(pdev);
-	struct Scsi_Host 	*host = ioc->sh;
-	MPT_SCSI_HOST		*hd;
-
-	mpt_resume(pdev);
-
-	if(!host)
-		return 0;
-
-	hd = (MPT_SCSI_HOST *)host->hostdata;
-	if(!hd)
-		return 0;
-
-	return 0;
+	return mpt_resume(pdev);
 }
 
 #endif
@@ -1537,21 +1521,23 @@
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /**
  *	mptscsih_TMHandler - Generic handler for SCSI Task Management.
- *	Fall through to mpt_HardResetHandler if: not operational, too many
- *	failed TM requests or handshake failure.
- *
- *	@ioc: Pointer to MPT_ADAPTER structure
+ *	@hd: Pointer to MPT SCSI HOST structure
  *	@type: Task Management type
+ *	@channel: channel number for task management
  *	@id: Logical Target ID for reset (if appropriate)
  *	@lun: Logical Unit for reset (if appropriate)
  *	@ctx2abort: Context for the task to be aborted (if appropriate)
+ *	@timeout: timeout for task management control
+ *
+ *	Fall through to mpt_HardResetHandler if: not operational, too many
+ *	failed TM requests or handshake failure.
  *
  *	Remark: Currently invoked from a non-interrupt thread (_bh).
  *
  *	Remark: With old EH code, at most 1 SCSI TaskMgmt function per IOC
  *	will be active.
  *
- *	Returns 0 for SUCCESS, or FAILED.
+ *	Returns 0 for SUCCESS, or %FAILED.
  **/
 int
 mptscsih_TMHandler(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 id, int lun, int ctx2abort, ulong timeout)
@@ -1650,9 +1636,11 @@
  *	mptscsih_IssueTaskMgmt - Generic send Task Management function.
  *	@hd: Pointer to MPT_SCSI_HOST structure
  *	@type: Task Management type
+ *	@channel: channel number for task management
  *	@id: Logical Target ID for reset (if appropriate)
  *	@lun: Logical Unit for reset (if appropriate)
  *	@ctx2abort: Context for the task to be aborted (if appropriate)
+ *	@timeout: timeout for task management control
  *
  *	Remark: _HardResetHandler can be invoked from an interrupt thread (timer)
  *	or a non-interrupt thread.  In the former, must not call schedule().
@@ -2022,6 +2010,7 @@
 /**
  *	mptscsih_tm_wait_for_completion - wait for completion of TM task
  *	@hd: Pointer to MPT host structure.
+ *	@timeout: timeout value
  *
  *	Returns {SUCCESS,FAILED}.
  */
diff --git a/drivers/message/fusion/mptspi.c b/drivers/message/fusion/mptspi.c
index 85f21b5..d75f7ff 100644
--- a/drivers/message/fusion/mptspi.c
+++ b/drivers/message/fusion/mptspi.c
@@ -96,14 +96,13 @@
 static int	mptspiInternalCtx = -1; /* Used only for internal commands */
 
 /**
- * 	mptspi_setTargetNegoParms  - Update the target negotiation
- *	parameters based on the the Inquiry data, adapter capabilities,
- *	and NVRAM settings
- *
+ * 	mptspi_setTargetNegoParms  - Update the target negotiation parameters
  *	@hd: Pointer to a SCSI Host Structure
- *	@vtarget: per target private data
+ *	@target: per target private data
  *	@sdev: SCSI device
  *
+ * 	Update the target negotiation parameters based on the the Inquiry
+ *	data, adapter capabilities, and NVRAM settings.
  **/
 static void
 mptspi_setTargetNegoParms(MPT_SCSI_HOST *hd, VirtTarget *target,
@@ -234,7 +233,7 @@
 /**
  * 	mptspi_writeIOCPage4  - write IOC Page 4
  *	@hd: Pointer to a SCSI Host Structure
- *	@channel:
+ *	@channel: channel number
  *	@id: write IOC Page4 for this ID & Bus
  *
  *	Return: -EAGAIN if unable to obtain a Message Frame
@@ -446,7 +445,7 @@
 	return 0;
 }
 
-void
+static void
 mptspi_target_destroy(struct scsi_target *starget)
 {
 	if (starget->hostdata)
@@ -677,7 +676,9 @@
 		return;
 	}
 
+	hd->spi_pending |= (1 << sdev->id);
 	spi_dv_device(sdev);
+	hd->spi_pending &= ~(1 << sdev->id);
 
 	if (sdev->channel == 1 &&
 	    mptscsih_quiesce_raid(hd, 0, vtarget->channel, vtarget->id) < 0)
@@ -1203,11 +1204,27 @@
 		container_of(work, struct work_queue_wrapper, work);
 	struct _MPT_SCSI_HOST *hd = wqw->hd;
 	struct scsi_device *sdev;
+	struct scsi_target *starget;
+	struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1;
+	u32 nego;
 
 	kfree(wqw);
 
-	shost_for_each_device(sdev, hd->ioc->sh)
-		mptspi_dv_device(hd, sdev);
+	if (hd->spi_pending) {
+		shost_for_each_device(sdev, hd->ioc->sh) {
+			if  (hd->spi_pending & (1 << sdev->id))
+				continue;
+			starget = scsi_target(sdev);
+			nego = mptspi_getRP(starget);
+			pg1.RequestedParameters = cpu_to_le32(nego);
+			pg1.Reserved = 0;
+			pg1.Configuration = 0;
+			mptspi_write_spi_device_pg1(starget, &pg1);
+		}
+	} else {
+		shost_for_each_device(sdev, hd->ioc->sh)
+			mptspi_dv_device(hd, sdev);
+	}
 }
 
 static void
@@ -1453,6 +1470,7 @@
 	init_waitqueue_head(&hd->scandv_waitq);
 	hd->scandv_wait_done = 0;
 	hd->last_queue_full = 0;
+	hd->spi_pending = 0;
 
 	/* Some versions of the firmware don't support page 0; without
 	 * that we can't get the parameters */
diff --git a/drivers/s390/scsi/zfcp_erp.c b/drivers/s390/scsi/zfcp_erp.c
index 421da1e..c1f2d4b 100644
--- a/drivers/s390/scsi/zfcp_erp.c
+++ b/drivers/s390/scsi/zfcp_erp.c
@@ -186,7 +186,7 @@
 {
 	fsf_req->timer.function = zfcp_fsf_request_timeout_handler;
 	fsf_req->timer.data = (unsigned long) fsf_req->adapter;
-	fsf_req->timer.expires = timeout;
+	fsf_req->timer.expires = jiffies + timeout;
 	add_timer(&fsf_req->timer);
 }
 
diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c
index ef16f7c..4c0a59a 100644
--- a/drivers/s390/scsi/zfcp_fsf.c
+++ b/drivers/s390/scsi/zfcp_fsf.c
@@ -299,9 +299,10 @@
 	}
 
 	/* log additional information provided by FSF (if any) */
-	if (unlikely(qtcb->header.log_length)) {
+	if (likely(qtcb->header.log_length)) {
 		/* do not trust them ;-) */
-		if (qtcb->header.log_start > sizeof(struct fsf_qtcb)) {
+		if (unlikely(qtcb->header.log_start >
+			     sizeof(struct fsf_qtcb))) {
 			ZFCP_LOG_NORMAL
 			    ("bug: ULP (FSF logging) log data starts "
 			     "beyond end of packet header. Ignored. "
@@ -310,8 +311,9 @@
 			     sizeof(struct fsf_qtcb));
 			goto forget_log;
 		}
-		if ((size_t) (qtcb->header.log_start + qtcb->header.log_length)
-		    > sizeof(struct fsf_qtcb)) {
+		if (unlikely((size_t) (qtcb->header.log_start +
+				       qtcb->header.log_length) >
+			     sizeof(struct fsf_qtcb))) {
 			ZFCP_LOG_NORMAL("bug: ULP (FSF logging) log data ends "
 					"beyond end of packet header. Ignored. "
 					"(start=%i, length=%i, size=%li)\n",
diff --git a/drivers/scsi/BusLogic.c b/drivers/scsi/BusLogic.c
index e874b89..96f4cab0 100644
--- a/drivers/scsi/BusLogic.c
+++ b/drivers/scsi/BusLogic.c
@@ -579,17 +579,17 @@
 	/*
 	   Append the list of standard BusLogic MultiMaster ISA I/O Addresses.
 	 */
-	if (BusLogic_ProbeOptions.LimitedProbeISA ? BusLogic_ProbeOptions.Probe330 : check_region(0x330, BusLogic_MultiMasterAddressCount) == 0)
+	if (!BusLogic_ProbeOptions.LimitedProbeISA || BusLogic_ProbeOptions.Probe330)
 		BusLogic_AppendProbeAddressISA(0x330);
-	if (BusLogic_ProbeOptions.LimitedProbeISA ? BusLogic_ProbeOptions.Probe334 : check_region(0x334, BusLogic_MultiMasterAddressCount) == 0)
+	if (!BusLogic_ProbeOptions.LimitedProbeISA || BusLogic_ProbeOptions.Probe334)
 		BusLogic_AppendProbeAddressISA(0x334);
-	if (BusLogic_ProbeOptions.LimitedProbeISA ? BusLogic_ProbeOptions.Probe230 : check_region(0x230, BusLogic_MultiMasterAddressCount) == 0)
+	if (!BusLogic_ProbeOptions.LimitedProbeISA || BusLogic_ProbeOptions.Probe230)
 		BusLogic_AppendProbeAddressISA(0x230);
-	if (BusLogic_ProbeOptions.LimitedProbeISA ? BusLogic_ProbeOptions.Probe234 : check_region(0x234, BusLogic_MultiMasterAddressCount) == 0)
+	if (!BusLogic_ProbeOptions.LimitedProbeISA || BusLogic_ProbeOptions.Probe234)
 		BusLogic_AppendProbeAddressISA(0x234);
-	if (BusLogic_ProbeOptions.LimitedProbeISA ? BusLogic_ProbeOptions.Probe130 : check_region(0x130, BusLogic_MultiMasterAddressCount) == 0)
+	if (!BusLogic_ProbeOptions.LimitedProbeISA || BusLogic_ProbeOptions.Probe130)
 		BusLogic_AppendProbeAddressISA(0x130);
-	if (BusLogic_ProbeOptions.LimitedProbeISA ? BusLogic_ProbeOptions.Probe134 : check_region(0x134, BusLogic_MultiMasterAddressCount) == 0)
+	if (!BusLogic_ProbeOptions.LimitedProbeISA || BusLogic_ProbeOptions.Probe134)
 		BusLogic_AppendProbeAddressISA(0x134);
 }
 
@@ -795,7 +795,9 @@
 	   host adapters are probed.
 	 */
 	if (!BusLogic_ProbeOptions.NoProbeISA)
-		if (PrimaryProbeInfo->IO_Address == 0 && (BusLogic_ProbeOptions.LimitedProbeISA ? BusLogic_ProbeOptions.Probe330 : check_region(0x330, BusLogic_MultiMasterAddressCount) == 0)) {
+		if (PrimaryProbeInfo->IO_Address == 0 &&
+				(!BusLogic_ProbeOptions.LimitedProbeISA ||
+				 BusLogic_ProbeOptions.Probe330)) {
 			PrimaryProbeInfo->HostAdapterType = BusLogic_MultiMaster;
 			PrimaryProbeInfo->HostAdapterBusType = BusLogic_ISA_Bus;
 			PrimaryProbeInfo->IO_Address = 0x330;
@@ -805,15 +807,25 @@
 	   omitting the Primary I/O Address which has already been handled.
 	 */
 	if (!BusLogic_ProbeOptions.NoProbeISA) {
-		if (!StandardAddressSeen[1] && (BusLogic_ProbeOptions.LimitedProbeISA ? BusLogic_ProbeOptions.Probe334 : check_region(0x334, BusLogic_MultiMasterAddressCount) == 0))
+		if (!StandardAddressSeen[1] &&
+				(!BusLogic_ProbeOptions.LimitedProbeISA ||
+				 BusLogic_ProbeOptions.Probe334))
 			BusLogic_AppendProbeAddressISA(0x334);
-		if (!StandardAddressSeen[2] && (BusLogic_ProbeOptions.LimitedProbeISA ? BusLogic_ProbeOptions.Probe230 : check_region(0x230, BusLogic_MultiMasterAddressCount) == 0))
+		if (!StandardAddressSeen[2] &&
+				(!BusLogic_ProbeOptions.LimitedProbeISA ||
+				 BusLogic_ProbeOptions.Probe230))
 			BusLogic_AppendProbeAddressISA(0x230);
-		if (!StandardAddressSeen[3] && (BusLogic_ProbeOptions.LimitedProbeISA ? BusLogic_ProbeOptions.Probe234 : check_region(0x234, BusLogic_MultiMasterAddressCount) == 0))
+		if (!StandardAddressSeen[3] &&
+				(!BusLogic_ProbeOptions.LimitedProbeISA ||
+				 BusLogic_ProbeOptions.Probe234))
 			BusLogic_AppendProbeAddressISA(0x234);
-		if (!StandardAddressSeen[4] && (BusLogic_ProbeOptions.LimitedProbeISA ? BusLogic_ProbeOptions.Probe130 : check_region(0x130, BusLogic_MultiMasterAddressCount) == 0))
+		if (!StandardAddressSeen[4] &&
+				(!BusLogic_ProbeOptions.LimitedProbeISA ||
+				 BusLogic_ProbeOptions.Probe130))
 			BusLogic_AppendProbeAddressISA(0x130);
-		if (!StandardAddressSeen[5] && (BusLogic_ProbeOptions.LimitedProbeISA ? BusLogic_ProbeOptions.Probe134 : check_region(0x134, BusLogic_MultiMasterAddressCount) == 0))
+		if (!StandardAddressSeen[5] &&
+				(!BusLogic_ProbeOptions.LimitedProbeISA ||
+				 BusLogic_ProbeOptions.Probe134))
 			BusLogic_AppendProbeAddressISA(0x134);
 	}
 	/*
@@ -2220,22 +2232,35 @@
 		HostAdapter->PCI_Device = ProbeInfo->PCI_Device;
 		HostAdapter->IRQ_Channel = ProbeInfo->IRQ_Channel;
 		HostAdapter->AddressCount = BusLogic_HostAdapterAddressCount[HostAdapter->HostAdapterType];
+
+		/*
+		   Make sure region is free prior to probing.
+		 */
+		if (!request_region(HostAdapter->IO_Address, HostAdapter->AddressCount,
+					"BusLogic"))
+			continue;
 		/*
 		   Probe the Host Adapter.  If unsuccessful, abort further initialization.
 		 */
-		if (!BusLogic_ProbeHostAdapter(HostAdapter))
+		if (!BusLogic_ProbeHostAdapter(HostAdapter)) {
+			release_region(HostAdapter->IO_Address, HostAdapter->AddressCount);
 			continue;
+		}
 		/*
 		   Hard Reset the Host Adapter.  If unsuccessful, abort further
 		   initialization.
 		 */
-		if (!BusLogic_HardwareResetHostAdapter(HostAdapter, true))
+		if (!BusLogic_HardwareResetHostAdapter(HostAdapter, true)) {
+			release_region(HostAdapter->IO_Address, HostAdapter->AddressCount);
 			continue;
+		}
 		/*
 		   Check the Host Adapter.  If unsuccessful, abort further initialization.
 		 */
-		if (!BusLogic_CheckHostAdapter(HostAdapter))
+		if (!BusLogic_CheckHostAdapter(HostAdapter)) {
+			release_region(HostAdapter->IO_Address, HostAdapter->AddressCount);
 			continue;
+		}
 		/*
 		   Initialize the Driver Options field if provided.
 		 */
@@ -2247,16 +2272,6 @@
 		 */
 		BusLogic_AnnounceDriver(HostAdapter);
 		/*
-		   Register usage of the I/O Address range.  From this point onward, any
-		   failure will be assumed to be due to a problem with the Host Adapter,
-		   rather than due to having mistakenly identified this port as belonging
-		   to a BusLogic Host Adapter.  The I/O Address range will not be
-		   released, thereby preventing it from being incorrectly identified as
-		   any other type of Host Adapter.
-		 */
-		if (!request_region(HostAdapter->IO_Address, HostAdapter->AddressCount, "BusLogic"))
-			continue;
-		/*
 		   Register the SCSI Host structure.
 		 */
 
@@ -2280,6 +2295,12 @@
 		   Acquire the System Resources necessary to use the Host Adapter, then
 		   Create the Initial CCBs, Initialize the Host Adapter, and finally
 		   perform Target Device Inquiry.
+
+		   From this point onward, any failure will be assumed to be due to a
+		   problem with the Host Adapter, rather than due to having mistakenly
+		   identified this port as belonging to a BusLogic Host Adapter.  The
+		   I/O Address range will not be released, thereby preventing it from
+		   being incorrectly identified as any other type of Host Adapter.
 		 */
 		if (BusLogic_ReadHostAdapterConfiguration(HostAdapter) &&
 		    BusLogic_ReportHostAdapterConfiguration(HostAdapter) &&
@@ -3598,6 +3619,7 @@
 
 __setup("BusLogic=", BusLogic_Setup);
 
+#ifdef MODULE
 static struct pci_device_id BusLogic_pci_tbl[] __devinitdata = {
 	{ PCI_VENDOR_ID_BUSLOGIC, PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER,
 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
@@ -3607,6 +3629,7 @@
 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
 	{ }
 };
+#endif
 MODULE_DEVICE_TABLE(pci, BusLogic_pci_tbl);
 
 module_init(BusLogic_init);
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index e1ebed0..58c811d2 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -241,6 +241,12 @@
 	  You can override this choice by specifying "scsi_mod.scan=sync"
 	  or async on the kernel's command line.
 
+config SCSI_WAIT_SCAN
+	tristate
+	default m
+	depends on SCSI
+	depends on MODULES
+
 menu "SCSI Transports"
 	depends on SCSI
 
@@ -1194,17 +1200,6 @@
 	  There is no safe option other than using good cabling, right
 	  terminations and SCSI conformant devices.
 
-config SCSI_NCR53C8XX_PROFILE
-	bool "enable profiling"
-	depends on SCSI_ZALON || SCSI_NCR_Q720
-	help
-	  This option allows you to enable profiling information gathering.
-	  These statistics are not very accurate due to the low frequency
-	  of the kernel clock (100 Hz on i386) and have performance impact
-	  on systems that use very fast devices.
-
-	  The normal answer therefore is N.
-
 config SCSI_NCR53C8XX_NO_DISCONNECT
 	bool "not allow targets to disconnect"
 	depends on (SCSI_ZALON || SCSI_NCR_Q720) && SCSI_NCR53C8XX_DEFAULT_TAGS=0
@@ -1334,11 +1329,6 @@
 
 	  It currently supports Compaq EISA cards and NCR MCA cards
 
-config 53C700_IO_MAPPED
-	bool
-	depends on SCSI_SIM710
-	default y
-
 config SCSI_SYM53C416
 	tristate "Symbios 53c416 SCSI support"
 	depends on ISA && SCSI
diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
index 70cff4c..51e884f 100644
--- a/drivers/scsi/Makefile
+++ b/drivers/scsi/Makefile
@@ -146,7 +146,7 @@
 # This goes last, so that "real" scsi devices probe earlier
 obj-$(CONFIG_SCSI_DEBUG)	+= scsi_debug.o
 
-obj-$(CONFIG_SCSI)		+= scsi_wait_scan.o
+obj-$(CONFIG_SCSI_WAIT_SCAN)	+= scsi_wait_scan.o
 
 scsi_mod-y			+= scsi.o hosts.o scsi_ioctl.o constants.o \
 				   scsicam.o scsi_error.o scsi_lib.o \
diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c
index d789e61..1e82c69 100644
--- a/drivers/scsi/aacraid/aachba.c
+++ b/drivers/scsi/aacraid/aachba.c
@@ -5,7 +5,7 @@
  * based on the old aacraid driver that is..
  * Adaptec aacraid device driver for Linux.
  *
- * Copyright (c) 2000 Adaptec, Inc. (aacraid@adaptec.com)
+ * Copyright (c) 2000-2007 Adaptec, Inc. (aacraid@adaptec.com)
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -172,6 +172,30 @@
 int expose_physicals = -1;
 module_param(expose_physicals, int, S_IRUGO|S_IWUSR);
 MODULE_PARM_DESC(expose_physicals, "Expose physical components of the arrays. -1=protect 0=off, 1=on");
+
+
+static inline int aac_valid_context(struct scsi_cmnd *scsicmd,
+		struct fib *fibptr) {
+	struct scsi_device *device;
+
+	if (unlikely(!scsicmd || !scsicmd->scsi_done )) {
+		dprintk((KERN_WARNING "aac_valid_context: scsi command corrupt\n"))
+;
+                aac_fib_complete(fibptr);
+                aac_fib_free(fibptr);
+                return 0;
+        }
+	scsicmd->SCp.phase = AAC_OWNER_MIDLEVEL;
+	device = scsicmd->device;
+	if (unlikely(!device || !scsi_device_online(device))) {
+		dprintk((KERN_WARNING "aac_valid_context: scsi device corrupt\n"));
+		aac_fib_complete(fibptr);
+		aac_fib_free(fibptr);
+		return 0;
+	}
+	return 1;
+}
+
 /**
  *	aac_get_config_status	-	check the adapter configuration
  *	@common: adapter to query
@@ -258,13 +282,10 @@
 	u32 index; 
 	int status = 0;
 	struct fib * fibptr;
-	unsigned instance;
 	struct aac_get_container_count *dinfo;
 	struct aac_get_container_count_resp *dresp;
 	int maximum_num_containers = MAXIMUM_NUM_CONTAINERS;
 
-	instance = dev->scsi_host_ptr->unique_id;
-
 	if (!(fibptr = aac_fib_alloc(dev)))
 		return -ENOMEM;
 
@@ -284,88 +305,35 @@
 		maximum_num_containers = le32_to_cpu(dresp->ContainerSwitchEntries);
 		aac_fib_complete(fibptr);
 	}
+	aac_fib_free(fibptr);
 
 	if (maximum_num_containers < MAXIMUM_NUM_CONTAINERS)
 		maximum_num_containers = MAXIMUM_NUM_CONTAINERS;
-	fsa_dev_ptr = kmalloc(
-	  sizeof(*fsa_dev_ptr) * maximum_num_containers, GFP_KERNEL);
-	if (!fsa_dev_ptr) {
-		aac_fib_free(fibptr);
+	fsa_dev_ptr =  kmalloc(sizeof(*fsa_dev_ptr) * maximum_num_containers,
+			GFP_KERNEL);
+	if (!fsa_dev_ptr)
 		return -ENOMEM;
-	}
 	memset(fsa_dev_ptr, 0, sizeof(*fsa_dev_ptr) * maximum_num_containers);
 
 	dev->fsa_dev = fsa_dev_ptr;
 	dev->maximum_num_containers = maximum_num_containers;
 
-	for (index = 0; index < dev->maximum_num_containers; index++) {
-		struct aac_query_mount *dinfo;
-		struct aac_mount *dresp;
-
+	for (index = 0; index < dev->maximum_num_containers; ) {
 		fsa_dev_ptr[index].devname[0] = '\0';
 
-		aac_fib_init(fibptr);
-		dinfo = (struct aac_query_mount *) fib_data(fibptr);
+		status = aac_probe_container(dev, index);
 
-		dinfo->command = cpu_to_le32(VM_NameServe);
-		dinfo->count = cpu_to_le32(index);
-		dinfo->type = cpu_to_le32(FT_FILESYS);
-
-		status = aac_fib_send(ContainerCommand,
-				    fibptr,
-				    sizeof (struct aac_query_mount),
-				    FsaNormal,
-				    1, 1,
-				    NULL, NULL);
-		if (status < 0 ) {
+		if (status < 0) {
 			printk(KERN_WARNING "aac_get_containers: SendFIB failed.\n");
 			break;
 		}
-		dresp = (struct aac_mount *)fib_data(fibptr);
 
-		if ((le32_to_cpu(dresp->status) == ST_OK) &&
-		    (le32_to_cpu(dresp->mnt[0].vol) == CT_NONE)) {
-			dinfo->command = cpu_to_le32(VM_NameServe64);
-			dinfo->count = cpu_to_le32(index);
-			dinfo->type = cpu_to_le32(FT_FILESYS);
-
-			if (aac_fib_send(ContainerCommand,
-				    fibptr,
-				    sizeof(struct aac_query_mount),
-				    FsaNormal,
-				    1, 1,
-				    NULL, NULL) < 0)
-				continue;
-		} else
-			dresp->mnt[0].capacityhigh = 0;
-
-		dprintk ((KERN_DEBUG
-		  "VM_NameServe cid=%d status=%d vol=%d state=%d cap=%llu\n",
-		  (int)index, (int)le32_to_cpu(dresp->status),
-		  (int)le32_to_cpu(dresp->mnt[0].vol),
-		  (int)le32_to_cpu(dresp->mnt[0].state),
-		  ((u64)le32_to_cpu(dresp->mnt[0].capacity)) +
-		    (((u64)le32_to_cpu(dresp->mnt[0].capacityhigh)) << 32)));
-		if ((le32_to_cpu(dresp->status) == ST_OK) &&
-		    (le32_to_cpu(dresp->mnt[0].vol) != CT_NONE) &&
-		    (le32_to_cpu(dresp->mnt[0].state) != FSCS_HIDDEN)) {
-			fsa_dev_ptr[index].valid = 1;
-			fsa_dev_ptr[index].type = le32_to_cpu(dresp->mnt[0].vol);
-			fsa_dev_ptr[index].size
-			  = ((u64)le32_to_cpu(dresp->mnt[0].capacity)) +
-			    (((u64)le32_to_cpu(dresp->mnt[0].capacityhigh)) << 32);
-			if (le32_to_cpu(dresp->mnt[0].state) & FSCS_READONLY)
-				    fsa_dev_ptr[index].ro = 1;
-		}
-		aac_fib_complete(fibptr);
 		/*
 		 *	If there are no more containers, then stop asking.
 		 */
-		if ((index + 1) >= le32_to_cpu(dresp->count)){
+		if (++index >= status)
 			break;
-		}
 	}
-	aac_fib_free(fibptr);
 	return status;
 }
 
@@ -382,8 +350,9 @@
 		buf = scsicmd->request_buffer;
 		transfer_len = min(scsicmd->request_bufflen, len + offset);
 	}
-
-	memcpy(buf + offset, data, transfer_len - offset);
+	transfer_len -= offset;
+	if (buf && transfer_len)
+		memcpy(buf + offset, data, transfer_len);
 
 	if (scsicmd->use_sg) 
 		kunmap_atomic(buf - sg->offset, KM_IRQ0);
@@ -396,7 +365,9 @@
 	struct scsi_cmnd * scsicmd;
 
 	scsicmd = (struct scsi_cmnd *) context;
-	scsicmd->SCp.phase = AAC_OWNER_MIDLEVEL;
+
+	if (!aac_valid_context(scsicmd, fibptr))
+		return;
 
 	dprintk((KERN_DEBUG "get_container_name_callback[cpu %d]: t = %ld.\n", smp_processor_id(), jiffies));
 	BUG_ON(fibptr == NULL);
@@ -431,7 +402,7 @@
 /**
  *	aac_get_container_name	-	get container name, none blocking.
  */
-static int aac_get_container_name(struct scsi_cmnd * scsicmd, int cid)
+static int aac_get_container_name(struct scsi_cmnd * scsicmd)
 {
 	int status;
 	struct aac_get_name *dinfo;
@@ -448,7 +419,7 @@
 
 	dinfo->command = cpu_to_le32(VM_ContainerConfig);
 	dinfo->type = cpu_to_le32(CT_READ_NAME);
-	dinfo->cid = cpu_to_le32(cid);
+	dinfo->cid = cpu_to_le32(scmd_id(scsicmd));
 	dinfo->count = cpu_to_le32(sizeof(((struct aac_get_name_resp *)NULL)->data));
 
 	status = aac_fib_send(ContainerCommand,
@@ -473,6 +444,153 @@
 	return -1;
 }
 
+static int aac_probe_container_callback2(struct scsi_cmnd * scsicmd)
+{
+	struct fsa_dev_info *fsa_dev_ptr = ((struct aac_dev *)(scsicmd->device->host->hostdata))->fsa_dev;
+
+	if (fsa_dev_ptr[scmd_id(scsicmd)].valid)
+		return aac_scsi_cmd(scsicmd);
+
+	scsicmd->result = DID_NO_CONNECT << 16;
+	scsicmd->scsi_done(scsicmd);
+	return 0;
+}
+
+static int _aac_probe_container2(void * context, struct fib * fibptr)
+{
+	struct fsa_dev_info *fsa_dev_ptr;
+	int (*callback)(struct scsi_cmnd *);
+	struct scsi_cmnd * scsicmd = (struct scsi_cmnd *)context;
+
+	if (!aac_valid_context(scsicmd, fibptr))
+		return 0;
+
+	fsa_dev_ptr = ((struct aac_dev *)(scsicmd->device->host->hostdata))->fsa_dev;
+
+	scsicmd->SCp.Status = 0;
+	if (fsa_dev_ptr) {
+		struct aac_mount * dresp = (struct aac_mount *) fib_data(fibptr);
+		fsa_dev_ptr += scmd_id(scsicmd);
+
+		if ((le32_to_cpu(dresp->status) == ST_OK) &&
+		    (le32_to_cpu(dresp->mnt[0].vol) != CT_NONE) &&
+		    (le32_to_cpu(dresp->mnt[0].state) != FSCS_HIDDEN)) {
+			fsa_dev_ptr->valid = 1;
+			fsa_dev_ptr->type = le32_to_cpu(dresp->mnt[0].vol);
+			fsa_dev_ptr->size
+			  = ((u64)le32_to_cpu(dresp->mnt[0].capacity)) +
+			    (((u64)le32_to_cpu(dresp->mnt[0].capacityhigh)) << 32);
+			fsa_dev_ptr->ro = ((le32_to_cpu(dresp->mnt[0].state) & FSCS_READONLY) != 0);
+		}
+		if ((fsa_dev_ptr->valid & 1) == 0)
+			fsa_dev_ptr->valid = 0;
+		scsicmd->SCp.Status = le32_to_cpu(dresp->count);
+	}
+	aac_fib_complete(fibptr);
+	aac_fib_free(fibptr);
+	callback = (int (*)(struct scsi_cmnd *))(scsicmd->SCp.ptr);
+	scsicmd->SCp.ptr = NULL;
+	return (*callback)(scsicmd);
+}
+
+static int _aac_probe_container1(void * context, struct fib * fibptr)
+{
+	struct scsi_cmnd * scsicmd;
+	struct aac_mount * dresp;
+	struct aac_query_mount *dinfo;
+	int status;
+
+	dresp = (struct aac_mount *) fib_data(fibptr);
+	dresp->mnt[0].capacityhigh = 0;
+	if ((le32_to_cpu(dresp->status) != ST_OK) ||
+	    (le32_to_cpu(dresp->mnt[0].vol) != CT_NONE))
+		return _aac_probe_container2(context, fibptr);
+	scsicmd = (struct scsi_cmnd *) context;
+	scsicmd->SCp.phase = AAC_OWNER_MIDLEVEL;
+
+	if (!aac_valid_context(scsicmd, fibptr))
+		return 0;
+
+	aac_fib_init(fibptr);
+
+	dinfo = (struct aac_query_mount *)fib_data(fibptr);
+
+	dinfo->command = cpu_to_le32(VM_NameServe64);
+	dinfo->count = cpu_to_le32(scmd_id(scsicmd));
+	dinfo->type = cpu_to_le32(FT_FILESYS);
+
+	status = aac_fib_send(ContainerCommand,
+			  fibptr,
+			  sizeof(struct aac_query_mount),
+			  FsaNormal,
+			  0, 1,
+			  (fib_callback) _aac_probe_container2,
+			  (void *) scsicmd);
+	/*
+	 *	Check that the command queued to the controller
+	 */
+	if (status == -EINPROGRESS) {
+		scsicmd->SCp.phase = AAC_OWNER_FIRMWARE;
+		return 0;
+	}
+	if (status < 0) {
+		/* Inherit results from VM_NameServe, if any */
+		dresp->status = cpu_to_le32(ST_OK);
+		return _aac_probe_container2(context, fibptr);
+	}
+	return 0;
+}
+
+static int _aac_probe_container(struct scsi_cmnd * scsicmd, int (*callback)(struct scsi_cmnd *))
+{
+	struct fib * fibptr;
+	int status = -ENOMEM;
+
+	if ((fibptr = aac_fib_alloc((struct aac_dev *)scsicmd->device->host->hostdata))) {
+		struct aac_query_mount *dinfo;
+
+		aac_fib_init(fibptr);
+
+		dinfo = (struct aac_query_mount *)fib_data(fibptr);
+
+		dinfo->command = cpu_to_le32(VM_NameServe);
+		dinfo->count = cpu_to_le32(scmd_id(scsicmd));
+		dinfo->type = cpu_to_le32(FT_FILESYS);
+		scsicmd->SCp.ptr = (char *)callback;
+
+		status = aac_fib_send(ContainerCommand,
+			  fibptr,
+			  sizeof(struct aac_query_mount),
+			  FsaNormal,
+			  0, 1,
+			  (fib_callback) _aac_probe_container1,
+			  (void *) scsicmd);
+		/*
+		 *	Check that the command queued to the controller
+		 */
+		if (status == -EINPROGRESS) {
+			scsicmd->SCp.phase = AAC_OWNER_FIRMWARE;
+			return 0;
+		}
+		if (status < 0) {
+			scsicmd->SCp.ptr = NULL;
+			aac_fib_complete(fibptr);
+			aac_fib_free(fibptr);
+		}
+	}
+	if (status < 0) {
+		struct fsa_dev_info *fsa_dev_ptr = ((struct aac_dev *)(scsicmd->device->host->hostdata))->fsa_dev;
+		if (fsa_dev_ptr) {
+			fsa_dev_ptr += scmd_id(scsicmd);
+			if ((fsa_dev_ptr->valid & 1) == 0) {
+				fsa_dev_ptr->valid = 0;
+				return (*callback)(scsicmd);
+			}
+		}
+	}
+	return status;
+}
+
 /**
  *	aac_probe_container		-	query a logical volume
  *	@dev: device to query
@@ -481,77 +599,37 @@
  *	Queries the controller about the given volume. The volume information
  *	is updated in the struct fsa_dev_info structure rather than returned.
  */
- 
+static int aac_probe_container_callback1(struct scsi_cmnd * scsicmd)
+{
+	scsicmd->device = NULL;
+	return 0;
+}
+
 int aac_probe_container(struct aac_dev *dev, int cid)
 {
-	struct fsa_dev_info *fsa_dev_ptr;
+	struct scsi_cmnd *scsicmd = kmalloc(sizeof(*scsicmd), GFP_KERNEL);
+	struct scsi_device *scsidev = kmalloc(sizeof(*scsidev), GFP_KERNEL);
 	int status;
-	struct aac_query_mount *dinfo;
-	struct aac_mount *dresp;
-	struct fib * fibptr;
-	unsigned instance;
 
-	fsa_dev_ptr = dev->fsa_dev;
-	if (!fsa_dev_ptr)
+	if (!scsicmd || !scsidev) {
+		kfree(scsicmd);
+		kfree(scsidev);
 		return -ENOMEM;
-	instance = dev->scsi_host_ptr->unique_id;
-
-	if (!(fibptr = aac_fib_alloc(dev)))
-		return -ENOMEM;
-
-	aac_fib_init(fibptr);
-
-	dinfo = (struct aac_query_mount *)fib_data(fibptr);
-
-	dinfo->command = cpu_to_le32(VM_NameServe);
-	dinfo->count = cpu_to_le32(cid);
-	dinfo->type = cpu_to_le32(FT_FILESYS);
-
-	status = aac_fib_send(ContainerCommand,
-			    fibptr,
-			    sizeof(struct aac_query_mount),
-			    FsaNormal,
-			    1, 1,
-			    NULL, NULL);
-	if (status < 0) {
-		printk(KERN_WARNING "aacraid: aac_probe_container query failed.\n");
-		goto error;
 	}
+	scsicmd->list.next = NULL;
+	scsicmd->scsi_done = (void (*)(struct scsi_cmnd*))_aac_probe_container1;
 
-	dresp = (struct aac_mount *) fib_data(fibptr);
+	scsicmd->device = scsidev;
+	scsidev->sdev_state = 0;
+	scsidev->id = cid;
+	scsidev->host = dev->scsi_host_ptr;
 
-	if ((le32_to_cpu(dresp->status) == ST_OK) &&
-	    (le32_to_cpu(dresp->mnt[0].vol) == CT_NONE)) {
-		dinfo->command = cpu_to_le32(VM_NameServe64);
-		dinfo->count = cpu_to_le32(cid);
-		dinfo->type = cpu_to_le32(FT_FILESYS);
-
-		if (aac_fib_send(ContainerCommand,
-			    fibptr,
-			    sizeof(struct aac_query_mount),
-			    FsaNormal,
-			    1, 1,
-			    NULL, NULL) < 0)
-			goto error;
-	} else
-		dresp->mnt[0].capacityhigh = 0;
-
-	if ((le32_to_cpu(dresp->status) == ST_OK) &&
-	    (le32_to_cpu(dresp->mnt[0].vol) != CT_NONE) &&
-	    (le32_to_cpu(dresp->mnt[0].state) != FSCS_HIDDEN)) {
-		fsa_dev_ptr[cid].valid = 1;
-		fsa_dev_ptr[cid].type = le32_to_cpu(dresp->mnt[0].vol);
-		fsa_dev_ptr[cid].size
-		  = ((u64)le32_to_cpu(dresp->mnt[0].capacity)) +
-		    (((u64)le32_to_cpu(dresp->mnt[0].capacityhigh)) << 32);
-		if (le32_to_cpu(dresp->mnt[0].state) & FSCS_READONLY)
-			fsa_dev_ptr[cid].ro = 1;
-	}
-
-error:
-	aac_fib_complete(fibptr);
-	aac_fib_free(fibptr);
-
+	if (_aac_probe_container(scsicmd, aac_probe_container_callback1) == 0)
+		while (scsicmd->device == scsidev)
+			schedule();
+	kfree(scsidev);
+	status = scsicmd->SCp.Status;
+	kfree(scsicmd);
 	return status;
 }
 
@@ -1115,6 +1193,12 @@
 			printk(KERN_INFO "%s%d: serial %x\n",
 				dev->name, dev->id,
 				le32_to_cpu(dev->adapter_info.serial[0]));
+		if (dev->supplement_adapter_info.VpdInfo.Tsid[0]) {
+			printk(KERN_INFO "%s%d: TSID %.*s\n",
+			  dev->name, dev->id,
+			  (int)sizeof(dev->supplement_adapter_info.VpdInfo.Tsid),
+			  dev->supplement_adapter_info.VpdInfo.Tsid);
+		}
 	}
 
 	dev->nondasd_support = 0;
@@ -1241,7 +1325,9 @@
 	u32 cid;
 
 	scsicmd = (struct scsi_cmnd *) context;
-	scsicmd->SCp.phase = AAC_OWNER_MIDLEVEL;
+
+	if (!aac_valid_context(scsicmd, fibptr))
+		return;
 
 	dev = (struct aac_dev *)scsicmd->device->host->hostdata;
 	cid = scmd_id(scsicmd);
@@ -1317,7 +1403,7 @@
 	scsicmd->scsi_done(scsicmd);
 }
 
-static int aac_read(struct scsi_cmnd * scsicmd, int cid)
+static int aac_read(struct scsi_cmnd * scsicmd)
 {
 	u64 lba;
 	u32 count;
@@ -1331,7 +1417,7 @@
 	 */
 	switch (scsicmd->cmnd[0]) {
 	case READ_6:
-		dprintk((KERN_DEBUG "aachba: received a read(6) command on id %d.\n", cid));
+		dprintk((KERN_DEBUG "aachba: received a read(6) command on id %d.\n", scmd_id(scsicmd)));
 
 		lba = ((scsicmd->cmnd[1] & 0x1F) << 16) | 
 			(scsicmd->cmnd[2] << 8) | scsicmd->cmnd[3];
@@ -1341,7 +1427,7 @@
 			count = 256;
 		break;
 	case READ_16:
-		dprintk((KERN_DEBUG "aachba: received a read(16) command on id %d.\n", cid));
+		dprintk((KERN_DEBUG "aachba: received a read(16) command on id %d.\n", scmd_id(scsicmd)));
 
 		lba = 	((u64)scsicmd->cmnd[2] << 56) |
 		 	((u64)scsicmd->cmnd[3] << 48) |
@@ -1355,7 +1441,7 @@
 			(scsicmd->cmnd[12] << 8) | scsicmd->cmnd[13];
 		break;
 	case READ_12:
-		dprintk((KERN_DEBUG "aachba: received a read(12) command on id %d.\n", cid));
+		dprintk((KERN_DEBUG "aachba: received a read(12) command on id %d.\n", scmd_id(scsicmd)));
 
 		lba = ((u64)scsicmd->cmnd[2] << 24) | 
 			(scsicmd->cmnd[3] << 16) |
@@ -1365,7 +1451,7 @@
 		      	(scsicmd->cmnd[8] << 8) | scsicmd->cmnd[9];
 		break;
 	default:
-		dprintk((KERN_DEBUG "aachba: received a read(10) command on id %d.\n", cid));
+		dprintk((KERN_DEBUG "aachba: received a read(10) command on id %d.\n", scmd_id(scsicmd)));
 
 		lba = ((u64)scsicmd->cmnd[2] << 24) | 
 			(scsicmd->cmnd[3] << 16) | 
@@ -1405,7 +1491,7 @@
 	return 0;
 }
 
-static int aac_write(struct scsi_cmnd * scsicmd, int cid)
+static int aac_write(struct scsi_cmnd * scsicmd)
 {
 	u64 lba;
 	u32 count;
@@ -1424,7 +1510,7 @@
 		if (count == 0)
 			count = 256;
 	} else if (scsicmd->cmnd[0] == WRITE_16) { /* 16 byte command */
-		dprintk((KERN_DEBUG "aachba: received a write(16) command on id %d.\n", cid));
+		dprintk((KERN_DEBUG "aachba: received a write(16) command on id %d.\n", scmd_id(scsicmd)));
 
 		lba = 	((u64)scsicmd->cmnd[2] << 56) |
 			((u64)scsicmd->cmnd[3] << 48) |
@@ -1436,14 +1522,14 @@
 		count = (scsicmd->cmnd[10] << 24) | (scsicmd->cmnd[11] << 16) |
 			(scsicmd->cmnd[12] << 8) | scsicmd->cmnd[13];
 	} else if (scsicmd->cmnd[0] == WRITE_12) { /* 12 byte command */
-		dprintk((KERN_DEBUG "aachba: received a write(12) command on id %d.\n", cid));
+		dprintk((KERN_DEBUG "aachba: received a write(12) command on id %d.\n", scmd_id(scsicmd)));
 
 		lba = ((u64)scsicmd->cmnd[2] << 24) | (scsicmd->cmnd[3] << 16)
 		    | (scsicmd->cmnd[4] << 8) | scsicmd->cmnd[5];
 		count = (scsicmd->cmnd[6] << 24) | (scsicmd->cmnd[7] << 16)
 		      | (scsicmd->cmnd[8] << 8) | scsicmd->cmnd[9];
 	} else {
-		dprintk((KERN_DEBUG "aachba: received a write(10) command on id %d.\n", cid));
+		dprintk((KERN_DEBUG "aachba: received a write(10) command on id %d.\n", scmd_id(scsicmd)));
 		lba = ((u64)scsicmd->cmnd[2] << 24) | (scsicmd->cmnd[3] << 16) | (scsicmd->cmnd[4] << 8) | scsicmd->cmnd[5];
 		count = (scsicmd->cmnd[7] << 8) | scsicmd->cmnd[8];
 	}
@@ -1488,7 +1574,9 @@
 	struct scsi_cmnd *cmd;
 
 	cmd = context;
-	cmd->SCp.phase = AAC_OWNER_MIDLEVEL;
+
+	if (!aac_valid_context(cmd, fibptr))
+		return;
 
 	dprintk((KERN_DEBUG "synchronize_callback[cpu %d]: t = %ld.\n", 
 				smp_processor_id(), jiffies));
@@ -1523,7 +1611,7 @@
 	cmd->scsi_done(cmd);
 }
 
-static int aac_synchronize(struct scsi_cmnd *scsicmd, int cid)
+static int aac_synchronize(struct scsi_cmnd *scsicmd)
 {
 	int status;
 	struct fib *cmd_fibcontext;
@@ -1568,7 +1656,7 @@
 	synchronizecmd = fib_data(cmd_fibcontext);
 	synchronizecmd->command = cpu_to_le32(VM_ContainerConfig);
 	synchronizecmd->type = cpu_to_le32(CT_FLUSH_CACHE);
-	synchronizecmd->cid = cpu_to_le32(cid);
+	synchronizecmd->cid = cpu_to_le32(scmd_id(scsicmd));
 	synchronizecmd->count = 
 	     cpu_to_le32(sizeof(((struct aac_synchronize_reply *)NULL)->data));
 
@@ -1646,29 +1734,12 @@
 				case TEST_UNIT_READY:
 					if (dev->in_reset)
 						return -1;
-					spin_unlock_irq(host->host_lock);
-					aac_probe_container(dev, cid);
-					if ((fsa_dev_ptr[cid].valid & 1) == 0)
-						fsa_dev_ptr[cid].valid = 0;
-					spin_lock_irq(host->host_lock);
-					if (fsa_dev_ptr[cid].valid == 0) {
-						scsicmd->result = DID_NO_CONNECT << 16;
-						scsicmd->scsi_done(scsicmd);
-						return 0;
-					}
+					return _aac_probe_container(scsicmd,
+							aac_probe_container_callback2);
 				default:
 					break;
 				}
 			}
-			/*
-			 *	If the target container still doesn't exist, 
-			 *	return failure
-			 */
-			if (fsa_dev_ptr[cid].valid == 0) {
-				scsicmd->result = DID_BAD_TARGET << 16;
-				scsicmd->scsi_done(scsicmd);
-				return 0;
-			}
 		} else {  /* check for physical non-dasd devices */
 			if ((dev->nondasd_support == 1) || expose_physicals) {
 				if (dev->in_reset)
@@ -1733,7 +1804,7 @@
 		setinqstr(dev, (void *) (inq_data.inqd_vid), fsa_dev_ptr[cid].type);
 		inq_data.inqd_pdt = INQD_PDT_DA;	/* Direct/random access device */
 		aac_internal_transfer(scsicmd, &inq_data, 0, sizeof(inq_data));
-		return aac_get_container_name(scsicmd, cid);
+		return aac_get_container_name(scsicmd);
 	}
 	case SERVICE_ACTION_IN:
 		if (!(dev->raw_io_interface) ||
@@ -1899,7 +1970,7 @@
 			  	min(sizeof(fsa_dev_ptr[cid].devname),
 				sizeof(scsicmd->request->rq_disk->disk_name) + 1));
 
-			return aac_read(scsicmd, cid);
+			return aac_read(scsicmd);
 
 		case WRITE_6:
 		case WRITE_10:
@@ -1907,11 +1978,11 @@
 		case WRITE_16:
 			if (dev->in_reset)
 				return -1;
-			return aac_write(scsicmd, cid);
+			return aac_write(scsicmd);
 
 		case SYNCHRONIZE_CACHE:
 			/* Issue FIB to tell Firmware to flush it's cache */
-			return aac_synchronize(scsicmd, cid);
+			return aac_synchronize(scsicmd);
 			
 		default:
 			/*
@@ -2058,7 +2129,10 @@
 	struct scsi_cmnd *scsicmd;
 
 	scsicmd = (struct scsi_cmnd *) context;
-	scsicmd->SCp.phase = AAC_OWNER_MIDLEVEL;
+
+	if (!aac_valid_context(scsicmd, fibptr))
+		return;
+
 	dev = (struct aac_dev *)scsicmd->device->host->hostdata;
 
 	BUG_ON(fibptr == NULL);
diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h
index 39ecd0d..45ca3e8 100644
--- a/drivers/scsi/aacraid/aacraid.h
+++ b/drivers/scsi/aacraid/aacraid.h
@@ -12,8 +12,8 @@
  *----------------------------------------------------------------------------*/
 
 #ifndef AAC_DRIVER_BUILD
-# define AAC_DRIVER_BUILD 2423
-# define AAC_DRIVER_BRANCH "-mh3"
+# define AAC_DRIVER_BUILD 2437
+# define AAC_DRIVER_BRANCH "-mh4"
 #endif
 #define MAXIMUM_NUM_CONTAINERS	32
 
@@ -48,49 +48,13 @@
 
 
 /*
- *	DON'T CHANGE THE ORDER, this is set by the firmware
+ *	Firmware constants
  */
  
 #define		CT_NONE			0
-#define		CT_VOLUME		1
-#define		CT_MIRROR		2
-#define		CT_STRIPE		3
-#define		CT_RAID5		4
-#define		CT_SSRW			5
-#define		CT_SSRO			6
-#define		CT_MORPH		7
-#define		CT_PASSTHRU		8
-#define		CT_RAID4		9
-#define		CT_RAID10		10	/* stripe of mirror */
-#define		CT_RAID00		11	/* stripe of stripe */
-#define		CT_VOLUME_OF_MIRRORS	12	/* volume of mirror */
-#define		CT_PSEUDO_RAID		13	/* really raid4 */
-#define		CT_LAST_VOLUME_TYPE	14
 #define 	CT_OK        		218
-
-/*
- *	Types of objects addressable in some fashion by the client.
- *	This is a superset of those objects handled just by the filesystem
- *	and includes "raw" objects that an administrator would use to
- *	configure containers and filesystems.
- */
-
-#define		FT_REG		1	/* regular file */
-#define		FT_DIR		2	/* directory */
-#define		FT_BLK		3	/* "block" device - reserved */
-#define		FT_CHR		4	/* "character special" device - reserved */
-#define		FT_LNK		5	/* symbolic link */
-#define		FT_SOCK		6	/* socket */
-#define		FT_FIFO		7	/* fifo */
 #define		FT_FILESYS	8	/* ADAPTEC's "FSA"(tm) filesystem */
 #define		FT_DRIVE	9	/* physical disk - addressable in scsi by bus/id/lun */
-#define		FT_SLICE	10	/* virtual disk - raw volume - slice */
-#define		FT_PARTITION	11	/* FSA partition - carved out of a slice - building block for containers */
-#define		FT_VOLUME	12	/* Container - Volume Set */
-#define		FT_STRIPE	13	/* Container - Stripe Set */
-#define		FT_MIRROR	14	/* Container - Mirror Set */
-#define		FT_RAID5	15	/* Container - Raid 5 Set */
-#define		FT_DATABASE	16	/* Storage object with "foreign" content manager */
 
 /*
  *	Host side memory scatter gather list
@@ -497,6 +461,7 @@
 	void (*adapter_enable_int)(struct aac_dev *dev);
 	int  (*adapter_sync_cmd)(struct aac_dev *dev, u32 command, u32 p1, u32 p2, u32 p3, u32 p4, u32 p5, u32 p6, u32 *status, u32 *r1, u32 *r2, u32 *r3, u32 *r4);
 	int  (*adapter_check_health)(struct aac_dev *dev);
+	int  (*adapter_restart)(struct aac_dev *dev, int bled);
 	/* Transport operations */
 	int  (*adapter_ioremap)(struct aac_dev * dev, u32 size);
 	irqreturn_t (*adapter_intr)(int irq, void *dev_id);
@@ -833,7 +798,7 @@
 	 */
 	struct list_head	fiblink;
 	void 			*data;
-	struct hw_fib		*hw_fib;		/* Actual shared object */
+	struct hw_fib		*hw_fib_va;		/* Actual shared object */
 	dma_addr_t		hw_fib_pa;		/* physical address of hw_fib*/
 };
 
@@ -878,10 +843,25 @@
 	__le32	Version;
 	__le32	FeatureBits;
 	u8	SlotNumber;
-	u8	ReservedPad0[0];
+	u8	ReservedPad0[3];
 	u8	BuildDate[12];
 	__le32	CurrentNumberPorts;
-	__le32	ReservedGrowth[24];
+	struct {
+		u8	AssemblyPn[8];
+		u8	FruPn[8];
+		u8	BatteryFruPn[8];
+		u8	EcVersionString[8];
+		u8	Tsid[12];
+	}	VpdInfo;
+	__le32	FlashFirmwareRevision;
+	__le32	FlashFirmwareBuild;
+	__le32	RaidTypeMorphOptions;
+	__le32	FlashFirmwareBootRevision;
+	__le32	FlashFirmwareBootBuild;
+	u8	MfgPcbaSerialNo[12];
+	u8	MfgWWNName[8];
+	__le32	MoreFeatureBits;
+	__le32	ReservedGrowth[1];
 };
 #define AAC_FEATURE_FALCON	0x00000010
 #define AAC_SIS_VERSION_V3	3
@@ -970,7 +950,6 @@
 	struct fib              *fibs;
 
 	struct fib		*free_fib;
-	struct fib		*timeout_fib;
 	spinlock_t		fib_lock;
 	
 	struct aac_queue_block *queues;
@@ -1060,6 +1039,9 @@
 #define aac_adapter_check_health(dev) \
 	(dev)->a_ops.adapter_check_health(dev)
 
+#define aac_adapter_restart(dev,bled) \
+	(dev)->a_ops.adapter_restart(dev,bled)
+
 #define aac_adapter_ioremap(dev, size) \
 	(dev)->a_ops.adapter_ioremap(dev, size)
 
@@ -1516,8 +1498,7 @@
 	struct creation_info	create_info;	/* if applicable */
 	__le32			capacity;
 	__le32			vol;    	/* substrate structure */
-	__le32			obj;	        /* FT_FILESYS, 
-						   FT_DATABASE, etc. */
+	__le32			obj;	        /* FT_FILESYS, etc. */
 	__le32			state;		/* unready for mounting, 
 						   readonly, etc. */
 	union aac_contentinfo	fileinfo;	/* Info specific to content 
@@ -1817,7 +1798,7 @@
 int aac_consumer_get(struct aac_dev * dev, struct aac_queue * q, struct aac_entry **entry);
 void aac_consumer_free(struct aac_dev * dev, struct aac_queue * q, u32 qnum);
 int aac_fib_complete(struct fib * context);
-#define fib_data(fibctx) ((void *)(fibctx)->hw_fib->data)
+#define fib_data(fibctx) ((void *)(fibctx)->hw_fib_va->data)
 struct aac_dev *aac_init_adapter(struct aac_dev *dev);
 int aac_get_config_status(struct aac_dev *dev, int commit_flag);
 int aac_get_containers(struct aac_dev *dev);
@@ -1840,8 +1821,11 @@
 int aac_get_adapter_info(struct aac_dev* dev);
 int aac_send_shutdown(struct aac_dev *dev);
 int aac_probe_container(struct aac_dev *dev, int cid);
+int _aac_rx_init(struct aac_dev *dev);
+int aac_rx_select_comm(struct aac_dev *dev, int comm);
 extern int numacb;
 extern int acbsize;
 extern char aac_driver_version[];
 extern int startup_timeout;
 extern int aif_timeout;
+extern int expose_physicals;
diff --git a/drivers/scsi/aacraid/commctrl.c b/drivers/scsi/aacraid/commctrl.c
index e21070f..72b0393 100644
--- a/drivers/scsi/aacraid/commctrl.c
+++ b/drivers/scsi/aacraid/commctrl.c
@@ -5,7 +5,7 @@
  * based on the old aacraid driver that is..
  * Adaptec aacraid device driver for Linux.
  *
- * Copyright (c) 2000 Adaptec, Inc. (aacraid@adaptec.com)
+ * Copyright (c) 2000-2007 Adaptec, Inc. (aacraid@adaptec.com)
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -64,12 +64,15 @@
 	unsigned size;
 	int retval;
 
+	if (dev->in_reset) {
+		return -EBUSY;
+	}
 	fibptr = aac_fib_alloc(dev);
 	if(fibptr == NULL) {
 		return -ENOMEM;
 	}
 		
-	kfib = fibptr->hw_fib;
+	kfib = fibptr->hw_fib_va;
 	/*
 	 *	First copy in the header so that we can check the size field.
 	 */
@@ -91,9 +94,9 @@
 			goto cleanup;
 		}
 		/* Highjack the hw_fib */
-		hw_fib = fibptr->hw_fib;
+		hw_fib = fibptr->hw_fib_va;
 		hw_fib_pa = fibptr->hw_fib_pa;
-		fibptr->hw_fib = kfib = pci_alloc_consistent(dev->pdev, size, &fibptr->hw_fib_pa);
+		fibptr->hw_fib_va = kfib = pci_alloc_consistent(dev->pdev, size, &fibptr->hw_fib_pa);
 		memset(((char *)kfib) + dev->max_fib_size, 0, size - dev->max_fib_size);
 		memcpy(kfib, hw_fib, dev->max_fib_size);
 	}
@@ -137,7 +140,7 @@
 	if (hw_fib) {
 		pci_free_consistent(dev->pdev, size, kfib, fibptr->hw_fib_pa);
 		fibptr->hw_fib_pa = hw_fib_pa;
-		fibptr->hw_fib = hw_fib;
+		fibptr->hw_fib_va = hw_fib;
 	}
 	if (retval != -EINTR)
 		aac_fib_free(fibptr);
@@ -282,15 +285,15 @@
 		fib = list_entry(entry, struct fib, fiblink);
 		fibctx->count--;
 		spin_unlock_irqrestore(&dev->fib_lock, flags);
-		if (copy_to_user(f.fib, fib->hw_fib, sizeof(struct hw_fib))) {
-			kfree(fib->hw_fib);
+		if (copy_to_user(f.fib, fib->hw_fib_va, sizeof(struct hw_fib))) {
+			kfree(fib->hw_fib_va);
 			kfree(fib);
 			return -EFAULT;
 		}	
 		/*
 		 *	Free the space occupied by this copy of the fib.
 		 */
-		kfree(fib->hw_fib);
+		kfree(fib->hw_fib_va);
 		kfree(fib);
 		status = 0;
 	} else {
@@ -340,7 +343,7 @@
 		/*
 		 *	Free the space occupied by this copy of the fib.
 		 */
-		kfree(fib->hw_fib);
+		kfree(fib->hw_fib_va);
 		kfree(fib);
 	}
 	/*
@@ -388,10 +391,8 @@
 		/*
 		 *	Extract the fibctx from the input parameters
 		 */
-		if (fibctx->unique == (u32)(unsigned long)arg) {   
-			/* We found a winner */
+		if (fibctx->unique == (u32)(ptrdiff_t)arg) /* We found a winner */
 			break;
-		}
 		entry = entry->next;
 		fibctx = NULL;
 	}
@@ -465,16 +466,20 @@
 	void *sg_list[32];
 	u32   sg_indx = 0;
 	u32 byte_count = 0;
-	u32 actual_fibsize = 0;
+	u32 actual_fibsize64, actual_fibsize = 0;
 	int i;
 
 
+	if (dev->in_reset) {
+		dprintk((KERN_DEBUG"aacraid: send raw srb -EBUSY\n"));
+		return -EBUSY;
+	}
 	if (!capable(CAP_SYS_ADMIN)){
 		dprintk((KERN_DEBUG"aacraid: No permission to send raw srb\n")); 
 		return -EPERM;
 	}
 	/*
-	 *	Allocate and initialize a Fib then setup a BlockWrite command
+	 *	Allocate and initialize a Fib then setup a SRB command
 	 */
 	if (!(srbfib = aac_fib_alloc(dev))) {
 		return -ENOMEM;
@@ -541,129 +546,183 @@
 		rcode = -EINVAL;
 		goto cleanup;
 	}
-	if (dev->dac_support == 1) {
+	actual_fibsize = sizeof(struct aac_srb) - sizeof(struct sgentry) +
+		((user_srbcmd->sg.count & 0xff) * sizeof(struct sgentry));
+	actual_fibsize64 = actual_fibsize + (user_srbcmd->sg.count & 0xff) *
+	  (sizeof(struct sgentry64) - sizeof(struct sgentry));
+	/* User made a mistake - should not continue */
+	if ((actual_fibsize != fibsize) && (actual_fibsize64 != fibsize)) {
+		dprintk((KERN_DEBUG"aacraid: Bad Size specified in "
+		  "Raw SRB command calculated fibsize=%lu;%lu "
+		  "user_srbcmd->sg.count=%d aac_srb=%lu sgentry=%lu;%lu "
+		  "issued fibsize=%d\n",
+		  actual_fibsize, actual_fibsize64, user_srbcmd->sg.count,
+		  sizeof(struct aac_srb), sizeof(struct sgentry),
+		  sizeof(struct sgentry64), fibsize));
+		rcode = -EINVAL;
+		goto cleanup;
+	}
+	if ((data_dir == DMA_NONE) && user_srbcmd->sg.count) {
+		dprintk((KERN_DEBUG"aacraid: SG with no direction specified in Raw SRB command\n"));
+		rcode = -EINVAL;
+		goto cleanup;
+	}
+	byte_count = 0;
+	if (dev->adapter_info.options & AAC_OPT_SGMAP_HOST64) {
 		struct user_sgmap64* upsg = (struct user_sgmap64*)&user_srbcmd->sg;
 		struct sgmap64* psg = (struct sgmap64*)&srbcmd->sg;
-		struct user_sgmap* usg;
-		byte_count = 0;
 
 		/*
 		 * This should also catch if user used the 32 bit sgmap
 		 */
-		actual_fibsize = sizeof(struct aac_srb) - 
-			sizeof(struct sgentry) +
-			((upsg->count & 0xff) * 
-		 	sizeof(struct sgentry));
-		if(actual_fibsize != fibsize){ // User made a mistake - should not continue
-			dprintk((KERN_DEBUG"aacraid: Bad Size specified in Raw SRB command\n"));
-			rcode = -EINVAL;
-			goto cleanup;
-		}
-		usg = kmalloc(actual_fibsize - sizeof(struct aac_srb)
-		  + sizeof(struct sgmap), GFP_KERNEL);
-		if (!usg) {
-			dprintk((KERN_DEBUG"aacraid: Allocation error in Raw SRB command\n"));
-			rcode = -ENOMEM;
-			goto cleanup;
-		}
-		memcpy (usg, upsg, actual_fibsize - sizeof(struct aac_srb)
-		  + sizeof(struct sgmap));
-		actual_fibsize = sizeof(struct aac_srb) - 
-			sizeof(struct sgentry) + ((usg->count & 0xff) * 
-			 	sizeof(struct sgentry64));
-		if ((data_dir == DMA_NONE) && upsg->count) {
-			kfree (usg);
-			dprintk((KERN_DEBUG"aacraid: SG with no direction specified in Raw SRB command\n"));
-			rcode = -EINVAL;
-			goto cleanup;
-		}
+		if (actual_fibsize64 == fibsize) {
+			actual_fibsize = actual_fibsize64;
+			for (i = 0; i < upsg->count; i++) {
+				u64 addr;
+				void* p;
+				/* Does this really need to be GFP_DMA? */
+				p = kmalloc(upsg->sg[i].count,GFP_KERNEL|__GFP_DMA);
+				if(p == 0) {
+					dprintk((KERN_DEBUG"aacraid: Could not allocate SG buffer - size = %d buffer number %d of %d\n",
+					  upsg->sg[i].count,i,upsg->count));
+					rcode = -ENOMEM;
+					goto cleanup;
+				}
+				addr = (u64)upsg->sg[i].addr[0];
+				addr += ((u64)upsg->sg[i].addr[1]) << 32;
+				sg_user[i] = (void __user *)(ptrdiff_t)addr;
+				sg_list[i] = p; // save so we can clean up later
+				sg_indx = i;
 
-		for (i = 0; i < usg->count; i++) {
-			u64 addr;
-			void* p;
-			/* Does this really need to be GFP_DMA? */
-			p = kmalloc(usg->sg[i].count,GFP_KERNEL|__GFP_DMA);
-			if(p == 0) {
-				kfree (usg);
-				dprintk((KERN_DEBUG"aacraid: Could not allocate SG buffer - size = %d buffer number %d of %d\n",
-				  usg->sg[i].count,i,usg->count));
+				if( flags & SRB_DataOut ){
+					if(copy_from_user(p,sg_user[i],upsg->sg[i].count)){
+						dprintk((KERN_DEBUG"aacraid: Could not copy sg data from user\n"));
+						rcode = -EFAULT;
+						goto cleanup;
+					}
+				}
+				addr = pci_map_single(dev->pdev, p, upsg->sg[i].count, data_dir);
+
+				psg->sg[i].addr[0] = cpu_to_le32(addr & 0xffffffff);
+				psg->sg[i].addr[1] = cpu_to_le32(addr>>32);
+				byte_count += upsg->sg[i].count;
+				psg->sg[i].count = cpu_to_le32(upsg->sg[i].count);
+			}
+		} else {
+			struct user_sgmap* usg;
+			usg = kmalloc(actual_fibsize - sizeof(struct aac_srb)
+			  + sizeof(struct sgmap), GFP_KERNEL);
+			if (!usg) {
+				dprintk((KERN_DEBUG"aacraid: Allocation error in Raw SRB command\n"));
 				rcode = -ENOMEM;
 				goto cleanup;
 			}
-			sg_user[i] = (void __user *)(long)usg->sg[i].addr;
-			sg_list[i] = p; // save so we can clean up later
-			sg_indx = i;
+			memcpy (usg, upsg, actual_fibsize - sizeof(struct aac_srb)
+			  + sizeof(struct sgmap));
+			actual_fibsize = actual_fibsize64;
 
-			if( flags & SRB_DataOut ){
-				if(copy_from_user(p,sg_user[i],upsg->sg[i].count)){
+			for (i = 0; i < usg->count; i++) {
+				u64 addr;
+				void* p;
+				/* Does this really need to be GFP_DMA? */
+				p = kmalloc(usg->sg[i].count,GFP_KERNEL|__GFP_DMA);
+				if(p == 0) {
 					kfree (usg);
-					dprintk((KERN_DEBUG"aacraid: Could not copy sg data from user\n")); 
-					rcode = -EFAULT;
+					dprintk((KERN_DEBUG"aacraid: Could not allocate SG buffer - size = %d buffer number %d of %d\n",
+					  usg->sg[i].count,i,usg->count));
+					rcode = -ENOMEM;
 					goto cleanup;
 				}
+				sg_user[i] = (void __user *)(ptrdiff_t)usg->sg[i].addr;
+				sg_list[i] = p; // save so we can clean up later
+				sg_indx = i;
+
+				if( flags & SRB_DataOut ){
+					if(copy_from_user(p,sg_user[i],upsg->sg[i].count)){
+						kfree (usg);
+						dprintk((KERN_DEBUG"aacraid: Could not copy sg data from user\n"));
+						rcode = -EFAULT;
+						goto cleanup;
+					}
+				}
+				addr = pci_map_single(dev->pdev, p, usg->sg[i].count, data_dir);
+
+				psg->sg[i].addr[0] = cpu_to_le32(addr & 0xffffffff);
+				psg->sg[i].addr[1] = cpu_to_le32(addr>>32);
+				byte_count += usg->sg[i].count;
+				psg->sg[i].count = cpu_to_le32(usg->sg[i].count);
 			}
-			addr = pci_map_single(dev->pdev, p, usg->sg[i].count, data_dir);
-
-			psg->sg[i].addr[0] = cpu_to_le32(addr & 0xffffffff);
-			psg->sg[i].addr[1] = cpu_to_le32(addr>>32);
-			psg->sg[i].count = cpu_to_le32(usg->sg[i].count);  
-			byte_count += usg->sg[i].count;
+			kfree (usg);
 		}
-		kfree (usg);
-
 		srbcmd->count = cpu_to_le32(byte_count);
 		psg->count = cpu_to_le32(sg_indx+1);
 		status = aac_fib_send(ScsiPortCommand64, srbfib, actual_fibsize, FsaNormal, 1, 1,NULL,NULL);
 	} else {
 		struct user_sgmap* upsg = &user_srbcmd->sg;
 		struct sgmap* psg = &srbcmd->sg;
-		byte_count = 0;
 
-		actual_fibsize = sizeof (struct aac_srb) + (((user_srbcmd->sg.count & 0xff) - 1) * sizeof (struct sgentry));
-		if(actual_fibsize != fibsize){ // User made a mistake - should not continue
-			dprintk((KERN_DEBUG"aacraid: Bad Size specified in "
-			  "Raw SRB command calculated fibsize=%d "
-			  "user_srbcmd->sg.count=%d aac_srb=%d sgentry=%d "
-			  "issued fibsize=%d\n",
-			  actual_fibsize, user_srbcmd->sg.count,
-			  sizeof(struct aac_srb), sizeof(struct sgentry),
-			  fibsize));
-			rcode = -EINVAL;
-			goto cleanup;
-		}
-		if ((data_dir == DMA_NONE) && upsg->count) {
-			dprintk((KERN_DEBUG"aacraid: SG with no direction specified in Raw SRB command\n"));
-			rcode = -EINVAL;
-			goto cleanup;
-		}
-		for (i = 0; i < upsg->count; i++) {
-			dma_addr_t addr; 
-			void* p;
-			p = kmalloc(upsg->sg[i].count, GFP_KERNEL);
-			if(p == 0) {
-				dprintk((KERN_DEBUG"aacraid: Could not allocate SG buffer - size = %d buffer number %d of %d\n",
-				  upsg->sg[i].count, i, upsg->count));
-				rcode = -ENOMEM;
-				goto cleanup;
-			}
-			sg_user[i] = (void __user *)(long)upsg->sg[i].addr;
-			sg_list[i] = p; // save so we can clean up later
-			sg_indx = i;
-
-			if( flags & SRB_DataOut ){
-				if(copy_from_user(p, sg_user[i],
-						upsg->sg[i].count)) {
-					dprintk((KERN_DEBUG"aacraid: Could not copy sg data from user\n")); 
-					rcode = -EFAULT;
+		if (actual_fibsize64 == fibsize) {
+			struct user_sgmap64* usg = (struct user_sgmap64 *)upsg;
+			for (i = 0; i < upsg->count; i++) {
+				u64 addr;
+				void* p;
+				/* Does this really need to be GFP_DMA? */
+				p = kmalloc(usg->sg[i].count,GFP_KERNEL|__GFP_DMA);
+				if(p == 0) {
+					dprintk((KERN_DEBUG"aacraid: Could not allocate SG buffer - size = %d buffer number %d of %d\n",
+					  usg->sg[i].count,i,usg->count));
+					rcode = -ENOMEM;
 					goto cleanup;
 				}
-			}
-			addr = pci_map_single(dev->pdev, p,
-				upsg->sg[i].count, data_dir);
+				addr = (u64)usg->sg[i].addr[0];
+				addr += ((u64)usg->sg[i].addr[1]) << 32;
+				sg_user[i] = (void __user *)(ptrdiff_t)addr;
+				sg_list[i] = p; // save so we can clean up later
+				sg_indx = i;
 
-			psg->sg[i].addr = cpu_to_le32(addr);
-			psg->sg[i].count = cpu_to_le32(upsg->sg[i].count);  
-			byte_count += upsg->sg[i].count;
+				if( flags & SRB_DataOut ){
+					if(copy_from_user(p,sg_user[i],usg->sg[i].count)){
+						dprintk((KERN_DEBUG"aacraid: Could not copy sg data from user\n"));
+						rcode = -EFAULT;
+						goto cleanup;
+					}
+				}
+				addr = pci_map_single(dev->pdev, p, usg->sg[i].count, data_dir);
+
+				psg->sg[i].addr = cpu_to_le32(addr & 0xffffffff);
+				byte_count += usg->sg[i].count;
+				psg->sg[i].count = cpu_to_le32(usg->sg[i].count);
+			}
+		} else {
+			for (i = 0; i < upsg->count; i++) {
+				dma_addr_t addr;
+				void* p;
+				p = kmalloc(upsg->sg[i].count, GFP_KERNEL);
+				if(p == 0) {
+					dprintk((KERN_DEBUG"aacraid: Could not allocate SG buffer - size = %d buffer number %d of %d\n",
+					  upsg->sg[i].count, i, upsg->count));
+					rcode = -ENOMEM;
+					goto cleanup;
+				}
+				sg_user[i] = (void __user *)(ptrdiff_t)upsg->sg[i].addr;
+				sg_list[i] = p; // save so we can clean up later
+				sg_indx = i;
+
+				if( flags & SRB_DataOut ){
+					if(copy_from_user(p, sg_user[i],
+							upsg->sg[i].count)) {
+						dprintk((KERN_DEBUG"aacraid: Could not copy sg data from user\n"));
+						rcode = -EFAULT;
+						goto cleanup;
+					}
+				}
+				addr = pci_map_single(dev->pdev, p,
+					upsg->sg[i].count, data_dir);
+
+				psg->sg[i].addr = cpu_to_le32(addr);
+				byte_count += upsg->sg[i].count;
+				psg->sg[i].count = cpu_to_le32(upsg->sg[i].count);
+			}
 		}
 		srbcmd->count = cpu_to_le32(byte_count);
 		psg->count = cpu_to_le32(sg_indx+1);
@@ -682,7 +741,8 @@
 
 	if( flags & SRB_DataIn ) {
 		for(i = 0 ; i <= sg_indx; i++){
-			byte_count = le32_to_cpu((dev->dac_support == 1)
+			byte_count = le32_to_cpu(
+			  (dev->adapter_info.options & AAC_OPT_SGMAP_HOST64)
 			      ? ((struct sgmap64*)&srbcmd->sg)->sg[i].count
 			      : srbcmd->sg.sg[i].count);
 			if(copy_to_user(sg_user[i], sg_list[i], byte_count)){
diff --git a/drivers/scsi/aacraid/comminit.c b/drivers/scsi/aacraid/comminit.c
index ae34768..33682ce 100644
--- a/drivers/scsi/aacraid/comminit.c
+++ b/drivers/scsi/aacraid/comminit.c
@@ -5,7 +5,7 @@
  * based on the old aacraid driver that is..
  * Adaptec aacraid device driver for Linux.
  *
- * Copyright (c) 2000 Adaptec, Inc. (aacraid@adaptec.com)
+ * Copyright (c) 2000-2007 Adaptec, Inc. (aacraid@adaptec.com)
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -110,7 +110,7 @@
 	/*
 	 *	Align the beginning of Headers to commalign
 	 */
-	align = (commalign - ((unsigned long)(base) & (commalign - 1)));
+	align = (commalign - ((ptrdiff_t)(base) & (commalign - 1)));
 	base = base + align;
 	phys = phys + align;
 	/*
diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c
index 1b97f60..5824a75 100644
--- a/drivers/scsi/aacraid/commsup.c
+++ b/drivers/scsi/aacraid/commsup.c
@@ -5,7 +5,7 @@
  * based on the old aacraid driver that is..
  * Adaptec aacraid device driver for Linux.
  *
- * Copyright (c) 2000 Adaptec, Inc. (aacraid@adaptec.com)
+ * Copyright (c) 2000-2007 Adaptec, Inc. (aacraid@adaptec.com)
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -94,7 +94,7 @@
 int aac_fib_setup(struct aac_dev * dev)
 {
 	struct fib *fibptr;
-	struct hw_fib *hw_fib_va;
+	struct hw_fib *hw_fib;
 	dma_addr_t hw_fib_pa;
 	int i;
 
@@ -106,24 +106,24 @@
 	if (i<0)
 		return -ENOMEM;
 		
-	hw_fib_va = dev->hw_fib_va;
+	hw_fib = dev->hw_fib_va;
 	hw_fib_pa = dev->hw_fib_pa;
-	memset(hw_fib_va, 0, dev->max_fib_size * (dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB));
+	memset(hw_fib, 0, dev->max_fib_size * (dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB));
 	/*
 	 *	Initialise the fibs
 	 */
 	for (i = 0, fibptr = &dev->fibs[i]; i < (dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB); i++, fibptr++) 
 	{
 		fibptr->dev = dev;
-		fibptr->hw_fib = hw_fib_va;
-		fibptr->data = (void *) fibptr->hw_fib->data;
+		fibptr->hw_fib_va = hw_fib;
+		fibptr->data = (void *) fibptr->hw_fib_va->data;
 		fibptr->next = fibptr+1;	/* Forward chain the fibs */
 		init_MUTEX_LOCKED(&fibptr->event_wait);
 		spin_lock_init(&fibptr->event_lock);
-		hw_fib_va->header.XferState = cpu_to_le32(0xffffffff);
-		hw_fib_va->header.SenderSize = cpu_to_le16(dev->max_fib_size);
+		hw_fib->header.XferState = cpu_to_le32(0xffffffff);
+		hw_fib->header.SenderSize = cpu_to_le16(dev->max_fib_size);
 		fibptr->hw_fib_pa = hw_fib_pa;
-		hw_fib_va = (struct hw_fib *)((unsigned char *)hw_fib_va + dev->max_fib_size);
+		hw_fib = (struct hw_fib *)((unsigned char *)hw_fib + dev->max_fib_size);
 		hw_fib_pa = hw_fib_pa + dev->max_fib_size;
 	}
 	/*
@@ -166,7 +166,7 @@
 	 *	Null out fields that depend on being zero at the start of
 	 *	each I/O
 	 */
-	fibptr->hw_fib->header.XferState = 0;
+	fibptr->hw_fib_va->header.XferState = 0;
 	fibptr->callback = NULL;
 	fibptr->callback_data = NULL;
 
@@ -178,7 +178,6 @@
  *	@fibptr: fib to free up
  *
  *	Frees up a fib and places it on the appropriate queue
- *	(either free or timed out)
  */
  
 void aac_fib_free(struct fib *fibptr)
@@ -186,19 +185,15 @@
 	unsigned long flags;
 
 	spin_lock_irqsave(&fibptr->dev->fib_lock, flags);
-	if (fibptr->flags & FIB_CONTEXT_FLAG_TIMED_OUT) {
+	if (unlikely(fibptr->flags & FIB_CONTEXT_FLAG_TIMED_OUT))
 		aac_config.fib_timeouts++;
-		fibptr->next = fibptr->dev->timeout_fib;
-		fibptr->dev->timeout_fib = fibptr;
-	} else {
-		if (fibptr->hw_fib->header.XferState != 0) {
-			printk(KERN_WARNING "aac_fib_free, XferState != 0, fibptr = 0x%p, XferState = 0x%x\n",
-				 (void*)fibptr, 
-				 le32_to_cpu(fibptr->hw_fib->header.XferState));
-		}
-		fibptr->next = fibptr->dev->free_fib;
-		fibptr->dev->free_fib = fibptr;
-	}	
+	if (fibptr->hw_fib_va->header.XferState != 0) {
+		printk(KERN_WARNING "aac_fib_free, XferState != 0, fibptr = 0x%p, XferState = 0x%x\n",
+			 (void*)fibptr,
+			 le32_to_cpu(fibptr->hw_fib_va->header.XferState));
+	}
+	fibptr->next = fibptr->dev->free_fib;
+	fibptr->dev->free_fib = fibptr;
 	spin_unlock_irqrestore(&fibptr->dev->fib_lock, flags);
 }
 
@@ -211,7 +206,7 @@
  
 void aac_fib_init(struct fib *fibptr)
 {
-	struct hw_fib *hw_fib = fibptr->hw_fib;
+	struct hw_fib *hw_fib = fibptr->hw_fib_va;
 
 	hw_fib->header.StructType = FIB_MAGIC;
 	hw_fib->header.Size = cpu_to_le16(fibptr->dev->max_fib_size);
@@ -231,7 +226,7 @@
  
 static void fib_dealloc(struct fib * fibptr)
 {
-	struct hw_fib *hw_fib = fibptr->hw_fib;
+	struct hw_fib *hw_fib = fibptr->hw_fib_va;
 	BUG_ON(hw_fib->header.StructType != FIB_MAGIC);
 	hw_fib->header.XferState = 0;        
 }
@@ -386,7 +381,7 @@
 		void *callback_data)
 {
 	struct aac_dev * dev = fibptr->dev;
-	struct hw_fib * hw_fib = fibptr->hw_fib;
+	struct hw_fib * hw_fib = fibptr->hw_fib_va;
 	unsigned long flags = 0;
 	unsigned long qflags;
 
@@ -430,7 +425,7 @@
 	 */
 	hw_fib->header.Command = cpu_to_le16(command);
 	hw_fib->header.XferState |= cpu_to_le32(SentFromHost);
-	fibptr->hw_fib->header.Flags = 0;	/* 0 the flags field - internal only*/
+	fibptr->hw_fib_va->header.Flags = 0;	/* 0 the flags field - internal only*/
 	/*
 	 *	Set the size of the Fib we want to send to the adapter
 	 */
@@ -462,7 +457,7 @@
 	dprintk((KERN_DEBUG "  Command =               %d.\n", le32_to_cpu(hw_fib->header.Command)));
 	dprintk((KERN_DEBUG "  SubCommand =            %d.\n", le32_to_cpu(((struct aac_query_mount *)fib_data(fibptr))->command)));
 	dprintk((KERN_DEBUG "  XferState  =            %x.\n", le32_to_cpu(hw_fib->header.XferState)));
-	dprintk((KERN_DEBUG "  hw_fib va being sent=%p\n",fibptr->hw_fib));
+	dprintk((KERN_DEBUG "  hw_fib va being sent=%p\n",fibptr->hw_fib_va));
 	dprintk((KERN_DEBUG "  hw_fib pa being sent=%lx\n",(ulong)fibptr->hw_fib_pa));
 	dprintk((KERN_DEBUG "  fib being sent=%p\n",fibptr));
 
@@ -513,22 +508,20 @@
 				}
 				udelay(5);
 			}
-		} else if (down_interruptible(&fibptr->event_wait)) {
-			spin_lock_irqsave(&fibptr->event_lock, flags);
-			if (fibptr->done == 0) {
-				fibptr->done = 2; /* Tell interrupt we aborted */
-				spin_unlock_irqrestore(&fibptr->event_lock, flags);
-				return -EINTR;
-			}
+		} else
+			(void)down_interruptible(&fibptr->event_wait);
+		spin_lock_irqsave(&fibptr->event_lock, flags);
+		if (fibptr->done == 0) {
+			fibptr->done = 2; /* Tell interrupt we aborted */
 			spin_unlock_irqrestore(&fibptr->event_lock, flags);
+			return -EINTR;
 		}
+		spin_unlock_irqrestore(&fibptr->event_lock, flags);
 		BUG_ON(fibptr->done == 0);
 			
-		if((fibptr->flags & FIB_CONTEXT_FLAG_TIMED_OUT)){
+		if(unlikely(fibptr->flags & FIB_CONTEXT_FLAG_TIMED_OUT))
 			return -ETIMEDOUT;
-		} else {
-			return 0;
-		}
+		return 0;
 	}
 	/*
 	 *	If the user does not want a response than return success otherwise
@@ -624,7 +617,7 @@
 
 int aac_fib_adapter_complete(struct fib *fibptr, unsigned short size)
 {
-	struct hw_fib * hw_fib = fibptr->hw_fib;
+	struct hw_fib * hw_fib = fibptr->hw_fib_va;
 	struct aac_dev * dev = fibptr->dev;
 	struct aac_queue * q;
 	unsigned long nointr = 0;
@@ -688,7 +681,7 @@
  
 int aac_fib_complete(struct fib *fibptr)
 {
-	struct hw_fib * hw_fib = fibptr->hw_fib;
+	struct hw_fib * hw_fib = fibptr->hw_fib_va;
 
 	/*
 	 *	Check for a fib which has already been completed
@@ -774,9 +767,8 @@
 #define AIF_SNIFF_TIMEOUT	(30*HZ)
 static void aac_handle_aif(struct aac_dev * dev, struct fib * fibptr)
 {
-	struct hw_fib * hw_fib = fibptr->hw_fib;
+	struct hw_fib * hw_fib = fibptr->hw_fib_va;
 	struct aac_aifcmd * aifcmd = (struct aac_aifcmd *)hw_fib->data;
-	int busy;
 	u32 container;
 	struct scsi_device *device;
 	enum {
@@ -988,9 +980,6 @@
 	 * behind you.
 	 */
 
-	busy = 0;
-
-
 	/*
 	 *	Find the scsi_device associated with the SCSI address,
 	 * and mark it as changed, invalidating the cache. This deals
@@ -1035,7 +1024,6 @@
 static int _aac_reset_adapter(struct aac_dev *aac)
 {
 	int index, quirks;
-	u32 ret;
 	int retval;
 	struct Scsi_Host *host;
 	struct scsi_device *dev;
@@ -1059,35 +1047,29 @@
 	 *	If a positive health, means in a known DEAD PANIC
 	 * state and the adapter could be reset to `try again'.
 	 */
-	retval = aac_adapter_check_health(aac);
-	if (retval == 0)
-		retval = aac_adapter_sync_cmd(aac, IOP_RESET_ALWAYS,
-		  0, 0, 0, 0, 0, 0, &ret, NULL, NULL, NULL, NULL);
-	if (retval)
-		retval = aac_adapter_sync_cmd(aac, IOP_RESET,
-		  0, 0, 0, 0, 0, 0, &ret, NULL, NULL, NULL, NULL);
+	retval = aac_adapter_restart(aac, aac_adapter_check_health(aac));
 
 	if (retval)
 		goto out;
-	if (ret != 0x00000001) {
-		retval = -ENODEV;
-		goto out;
-	}
 
 	/*
 	 *	Loop through the fibs, close the synchronous FIBS
 	 */
-	for (index = 0; index < (aac->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB); index++) {
+	for (retval = 1, index = 0; index < (aac->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB); index++) {
 		struct fib *fib = &aac->fibs[index];
-		if (!(fib->hw_fib->header.XferState & cpu_to_le32(NoResponseExpected | Async)) &&
-		  (fib->hw_fib->header.XferState & cpu_to_le32(ResponseExpected))) {
+		if (!(fib->hw_fib_va->header.XferState & cpu_to_le32(NoResponseExpected | Async)) &&
+		  (fib->hw_fib_va->header.XferState & cpu_to_le32(ResponseExpected))) {
 			unsigned long flagv;
 			spin_lock_irqsave(&fib->event_lock, flagv);
 			up(&fib->event_wait);
 			spin_unlock_irqrestore(&fib->event_lock, flagv);
 			schedule();
+			retval = 0;
 		}
 	}
+	/* Give some extra time for ioctls to complete. */
+	if (retval == 0)
+		ssleep(2);
 	index = aac->cardtype;
 
 	/*
@@ -1248,7 +1230,7 @@
 
 			memset(hw_fib, 0, sizeof(struct hw_fib));
 			memset(fib, 0, sizeof(struct fib));
-			fib->hw_fib = hw_fib;
+			fib->hw_fib_va = hw_fib;
 			fib->dev = aac;
 			aac_fib_init(fib);
 			fib->type = FSAFS_NTC_FIB_CONTEXT;
@@ -1354,11 +1336,11 @@
 			 *	do anything at this point since we don't have
 			 *	anything defined for this thread to do.
 			 */
-			hw_fib = fib->hw_fib;
+			hw_fib = fib->hw_fib_va;
 			memset(fib, 0, sizeof(struct fib));
 			fib->type = FSAFS_NTC_FIB_CONTEXT;
 			fib->size = sizeof( struct fib );
-			fib->hw_fib = hw_fib;
+			fib->hw_fib_va = hw_fib;
 			fib->data = hw_fib->data;
 			fib->dev = dev;
 			/*
@@ -1485,7 +1467,7 @@
 						 */
 						memcpy(hw_newfib, hw_fib, sizeof(struct hw_fib));
 						memcpy(newfib, fib, sizeof(struct fib));
-						newfib->hw_fib = hw_newfib;
+						newfib->hw_fib_va = hw_newfib;
 						/*
 						 * Put the FIB onto the
 						 * fibctx's fibs
diff --git a/drivers/scsi/aacraid/dpcsup.c b/drivers/scsi/aacraid/dpcsup.c
index 66aeb57..42c7dcd 100644
--- a/drivers/scsi/aacraid/dpcsup.c
+++ b/drivers/scsi/aacraid/dpcsup.c
@@ -5,7 +5,7 @@
  * based on the old aacraid driver that is..
  * Adaptec aacraid device driver for Linux.
  *
- * Copyright (c) 2000 Adaptec, Inc. (aacraid@adaptec.com)
+ * Copyright (c) 2000-2007 Adaptec, Inc. (aacraid@adaptec.com)
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -72,7 +72,7 @@
 		u32 index = le32_to_cpu(entry->addr);
 		fast = index & 0x01;
 		fib = &dev->fibs[index >> 2];
-		hwfib = fib->hw_fib;
+		hwfib = fib->hw_fib_va;
 		
 		aac_consumer_free(dev, q, HostNormRespQueue);
 		/*
@@ -83,11 +83,13 @@
 		 *	continue. The caller has already been notified that
 		 *	the fib timed out.
 		 */
-		if (!(fib->flags & FIB_CONTEXT_FLAG_TIMED_OUT))
-			dev->queues->queue[AdapNormCmdQueue].numpending--;
-		else {
-			printk(KERN_WARNING "aacraid: FIB timeout (%x).\n", fib->flags);
-			printk(KERN_DEBUG"aacraid: hwfib=%p fib index=%i fib=%p\n",hwfib, hwfib->header.SenderData,fib);
+		dev->queues->queue[AdapNormCmdQueue].numpending--;
+
+		if (unlikely(fib->flags & FIB_CONTEXT_FLAG_TIMED_OUT)) {
+			spin_unlock_irqrestore(q->lock, flags);
+			aac_fib_complete(fib);
+			aac_fib_free(fib);
+			spin_lock_irqsave(q->lock, flags);
 			continue;
 		}
 		spin_unlock_irqrestore(q->lock, flags);
@@ -192,7 +194,7 @@
 		INIT_LIST_HEAD(&fib->fiblink);
 		fib->type = FSAFS_NTC_FIB_CONTEXT;
 		fib->size = sizeof(struct fib);
-		fib->hw_fib = hw_fib;
+		fib->hw_fib_va = hw_fib;
 		fib->data = hw_fib->data;
 		fib->dev = dev;
 		
@@ -253,12 +255,13 @@
 			return 1;
 		}
 		memset(hw_fib, 0, sizeof(struct hw_fib));
-		memcpy(hw_fib, (struct hw_fib *)(((unsigned long)(dev->regs.sa)) + (index & ~0x00000002L)), sizeof(struct hw_fib));
+		memcpy(hw_fib, (struct hw_fib *)(((ptrdiff_t)(dev->regs.sa)) +
+		  (index & ~0x00000002L)), sizeof(struct hw_fib));
 		memset(fib, 0, sizeof(struct fib));
 		INIT_LIST_HEAD(&fib->fiblink);
 		fib->type = FSAFS_NTC_FIB_CONTEXT;
 		fib->size = sizeof(struct fib);
-		fib->hw_fib = hw_fib;
+		fib->hw_fib_va = hw_fib;
 		fib->data = hw_fib->data;
 		fib->dev = dev;
 	
@@ -270,7 +273,7 @@
 	} else {
 		int fast = index & 0x01;
 		struct fib * fib = &dev->fibs[index >> 2];
-		struct hw_fib * hwfib = fib->hw_fib;
+		struct hw_fib * hwfib = fib->hw_fib_va;
 
 		/*
 		 *	Remove this fib from the Outstanding I/O queue.
@@ -280,14 +283,14 @@
 		 *	continue. The caller has already been notified that
 		 *	the fib timed out.
 		 */
-		if ((fib->flags & FIB_CONTEXT_FLAG_TIMED_OUT)) {
-			printk(KERN_WARNING "aacraid: FIB timeout (%x).\n", fib->flags);
-			printk(KERN_DEBUG"aacraid: hwfib=%p index=%i fib=%p\n",hwfib, hwfib->header.SenderData,fib);
+		dev->queues->queue[AdapNormCmdQueue].numpending--;
+
+		if (unlikely(fib->flags & FIB_CONTEXT_FLAG_TIMED_OUT)) {
+			aac_fib_complete(fib);
+			aac_fib_free(fib);
 			return 0;
 		}
 
-		dev->queues->queue[AdapNormCmdQueue].numpending--;
-
 		if (fast) {
 			/*
 			 *	Doctor the fib
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index 0f948c2..350ea7f 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -5,7 +5,7 @@
  * based on the old aacraid driver that is..
  * Adaptec aacraid device driver for Linux.
  *
- * Copyright (c) 2000 Adaptec, Inc. (aacraid@adaptec.com)
+ * Copyright (c) 2000-2007 Adaptec, Inc. (aacraid@adaptec.com)
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -82,8 +82,6 @@
 static int aac_cfg_major = -1;
 char aac_driver_version[] = AAC_DRIVER_FULL_VERSION;
 
-extern int expose_physicals;
-
 /*
  * Because of the way Linux names scsi devices, the order in this table has
  * become important.  Check for on-board Raid first, add-in cards second.
@@ -247,7 +245,19 @@
 
 static int aac_queuecommand(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
 {
+	struct Scsi_Host *host = cmd->device->host;
+	struct aac_dev *dev = (struct aac_dev *)host->hostdata;
+	u32 count = 0;
 	cmd->scsi_done = done;
+	for (; count < (host->can_queue + AAC_NUM_MGT_FIB); ++count) {
+		struct fib * fib = &dev->fibs[count];
+		struct scsi_cmnd * command;
+		if (fib->hw_fib_va->header.XferState &&
+		    ((command = fib->callback_data)) &&
+		    (command == cmd) &&
+		    (cmd->SCp.phase == AAC_OWNER_FIRMWARE))
+			return 0; /* Already owned by Adapter */
+	}
 	cmd->SCp.phase = AAC_OWNER_LOWLEVEL;
 	return (aac_scsi_cmd(cmd) ? FAILED : 0);
 } 
@@ -446,6 +456,40 @@
 	return aac_do_ioctl(dev, cmd, arg);
 }
 
+static int aac_eh_abort(struct scsi_cmnd* cmd)
+{
+	struct scsi_device * dev = cmd->device;
+	struct Scsi_Host * host = dev->host;
+	struct aac_dev * aac = (struct aac_dev *)host->hostdata;
+	int count;
+	int ret = FAILED;
+
+	printk(KERN_ERR "%s: Host adapter abort request (%d,%d,%d,%d)\n",
+		AAC_DRIVERNAME,
+		host->host_no, sdev_channel(dev), sdev_id(dev), dev->lun);
+	switch (cmd->cmnd[0]) {
+	case SERVICE_ACTION_IN:
+		if (!(aac->raw_io_interface) ||
+		    !(aac->raw_io_64) ||
+		    ((cmd->cmnd[1] & 0x1f) != SAI_READ_CAPACITY_16))
+			break;
+	case INQUIRY:
+	case READ_CAPACITY:
+	case TEST_UNIT_READY:
+		/* Mark associated FIB to not complete, eh handler does this */
+		for (count = 0; count < (host->can_queue + AAC_NUM_MGT_FIB); ++count) {
+			struct fib * fib = &aac->fibs[count];
+			if (fib->hw_fib_va->header.XferState &&
+			  (fib->callback_data == cmd)) {
+				fib->flags |= FIB_CONTEXT_FLAG_TIMED_OUT;
+				cmd->SCp.phase = AAC_OWNER_ERROR_HANDLER;
+				ret = SUCCESS;
+			}
+		}
+	}
+	return ret;
+}
+
 /*
  *	aac_eh_reset	- Reset command handling
  *	@scsi_cmd:	SCSI command block causing the reset
@@ -457,12 +501,20 @@
 	struct Scsi_Host * host = dev->host;
 	struct scsi_cmnd * command;
 	int count;
-	struct aac_dev * aac;
+	struct aac_dev * aac = (struct aac_dev *)host->hostdata;
 	unsigned long flags;
 
+	/* Mark the associated FIB to not complete, eh handler does this */
+	for (count = 0; count < (host->can_queue + AAC_NUM_MGT_FIB); ++count) {
+		struct fib * fib = &aac->fibs[count];
+		if (fib->hw_fib_va->header.XferState &&
+		  (fib->callback_data == cmd)) {
+			fib->flags |= FIB_CONTEXT_FLAG_TIMED_OUT;
+			cmd->SCp.phase = AAC_OWNER_ERROR_HANDLER;
+		}
+	}
 	printk(KERN_ERR "%s: Host adapter reset request. SCSI hang ?\n", 
 					AAC_DRIVERNAME);
-	aac = (struct aac_dev *)host->hostdata;
 
 	if ((count = aac_check_health(aac)))
 		return count;
@@ -496,7 +548,7 @@
 		ssleep(1);
 	}
 	printk(KERN_ERR "%s: SCSI bus appears hung\n", AAC_DRIVERNAME);
-	return -ETIMEDOUT;
+	return SUCCESS; /* Cause an immediate retry of the command with a ten second delay after successful tur */
 }
 
 /**
@@ -796,6 +848,7 @@
 	.bios_param     		= aac_biosparm,	
 	.shost_attrs			= aac_attrs,
 	.slave_configure		= aac_slave_configure,
+	.eh_abort_handler		= aac_eh_abort,
 	.eh_host_reset_handler		= aac_eh_reset,
 	.can_queue      		= AAC_NUM_IO_FIB,	
 	.this_id        		= MAXIMUM_NUM_CONTAINERS,
diff --git a/drivers/scsi/aacraid/nark.c b/drivers/scsi/aacraid/nark.c
index c76b611..a8ace56 100644
--- a/drivers/scsi/aacraid/nark.c
+++ b/drivers/scsi/aacraid/nark.c
@@ -74,9 +74,6 @@
 
 int aac_nark_init(struct aac_dev * dev)
 {
-	extern int _aac_rx_init(struct aac_dev *dev);
-	extern int aac_rx_select_comm(struct aac_dev *dev, int comm);
-
 	/*
 	 *	Fill in the function dispatch table.
 	 */
diff --git a/drivers/scsi/aacraid/rkt.c b/drivers/scsi/aacraid/rkt.c
index d953c3f..9c5fcfb 100644
--- a/drivers/scsi/aacraid/rkt.c
+++ b/drivers/scsi/aacraid/rkt.c
@@ -45,7 +45,6 @@
 static int aac_rkt_select_comm(struct aac_dev *dev, int comm)
 {
 	int retval;
-	extern int aac_rx_select_comm(struct aac_dev *dev, int comm);
 	retval = aac_rx_select_comm(dev, comm);
 	if (comm == AAC_COMM_MESSAGE) {
 		/*
@@ -97,8 +96,6 @@
 
 int aac_rkt_init(struct aac_dev *dev)
 {
-	extern int _aac_rx_init(struct aac_dev *dev);
-
 	/*
 	 *	Fill in the function dispatch table.
 	 */
diff --git a/drivers/scsi/aacraid/rx.c b/drivers/scsi/aacraid/rx.c
index d242e26..0c71315 100644
--- a/drivers/scsi/aacraid/rx.c
+++ b/drivers/scsi/aacraid/rx.c
@@ -5,7 +5,7 @@
  * based on the old aacraid driver that is..
  * Adaptec aacraid device driver for Linux.
  *
- * Copyright (c) 2000 Adaptec, Inc. (aacraid@adaptec.com)
+ * Copyright (c) 2000-2007 Adaptec, Inc. (aacraid@adaptec.com)
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -57,25 +57,25 @@
 	 *	been enabled.
 	 *	Check to see if this is our interrupt.  If it isn't just return
 	 */
-	if (intstat & ~(dev->OIMR)) {
+	if (likely(intstat & ~(dev->OIMR))) {
 		bellbits = rx_readl(dev, OutboundDoorbellReg);
-		if (bellbits & DoorBellPrintfReady) {
+		if (unlikely(bellbits & DoorBellPrintfReady)) {
 			aac_printf(dev, readl (&dev->IndexRegs->Mailbox[5]));
 			rx_writel(dev, MUnit.ODR,DoorBellPrintfReady);
 			rx_writel(dev, InboundDoorbellReg,DoorBellPrintfDone);
 		}
-		else if (bellbits & DoorBellAdapterNormCmdReady) {
+		else if (unlikely(bellbits & DoorBellAdapterNormCmdReady)) {
 			rx_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdReady);
 			aac_command_normal(&dev->queues->queue[HostNormCmdQueue]);
 		}
-		else if (bellbits & DoorBellAdapterNormRespReady) {
+		else if (likely(bellbits & DoorBellAdapterNormRespReady)) {
 			rx_writel(dev, MUnit.ODR,DoorBellAdapterNormRespReady);
 			aac_response_normal(&dev->queues->queue[HostNormRespQueue]);
 		}
-		else if (bellbits & DoorBellAdapterNormCmdNotFull) {
+		else if (unlikely(bellbits & DoorBellAdapterNormCmdNotFull)) {
 			rx_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdNotFull);
 		}
-		else if (bellbits & DoorBellAdapterNormRespNotFull) {
+		else if (unlikely(bellbits & DoorBellAdapterNormRespNotFull)) {
 			rx_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdNotFull);
 			rx_writel(dev, MUnit.ODR, DoorBellAdapterNormRespNotFull);
 		}
@@ -88,11 +88,11 @@
 {
 	struct aac_dev *dev = dev_id;
 	u32 Index = rx_readl(dev, MUnit.OutboundQueue);
-	if (Index == 0xFFFFFFFFL)
+	if (unlikely(Index == 0xFFFFFFFFL))
 		Index = rx_readl(dev, MUnit.OutboundQueue);
-	if (Index != 0xFFFFFFFFL) {
+	if (likely(Index != 0xFFFFFFFFL)) {
 		do {
-			if (aac_intr_normal(dev, Index)) {
+			if (unlikely(aac_intr_normal(dev, Index))) {
 				rx_writel(dev, MUnit.OutboundQueue, Index);
 				rx_writel(dev, MUnit.ODR, DoorBellAdapterNormRespReady);
 			}
@@ -204,7 +204,7 @@
 		 */
 		msleep(1);
 	}
-	if (ok != 1) {
+	if (unlikely(ok != 1)) {
 		/*
 		 *	Restore interrupt mask even though we timed out
 		 */
@@ -294,7 +294,7 @@
  *	Start up processing on an i960 based AAC adapter
  */
 
-void aac_rx_start_adapter(struct aac_dev *dev)
+static void aac_rx_start_adapter(struct aac_dev *dev)
 {
 	struct aac_init *init;
 
@@ -319,12 +319,12 @@
 	/*
 	 *	Check to see if the board failed any self tests.
 	 */
-	if (status & SELF_TEST_FAILED)
+	if (unlikely(status & SELF_TEST_FAILED))
 		return -1;
 	/*
 	 *	Check to see if the board panic'd.
 	 */
-	if (status & KERNEL_PANIC) {
+	if (unlikely(status & KERNEL_PANIC)) {
 		char * buffer;
 		struct POSTSTATUS {
 			__le32 Post_Command;
@@ -333,15 +333,15 @@
 		dma_addr_t paddr, baddr;
 		int ret;
 
-		if ((status & 0xFF000000L) == 0xBC000000L)
+		if (likely((status & 0xFF000000L) == 0xBC000000L))
 			return (status >> 16) & 0xFF;
 		buffer = pci_alloc_consistent(dev->pdev, 512, &baddr);
 		ret = -2;
-		if (buffer == NULL)
+		if (unlikely(buffer == NULL))
 			return ret;
 		post = pci_alloc_consistent(dev->pdev,
 		  sizeof(struct POSTSTATUS), &paddr);
-		if (post == NULL) {
+		if (unlikely(post == NULL)) {
 			pci_free_consistent(dev->pdev, 512, buffer, baddr);
 			return ret;
 		}
@@ -353,7 +353,7 @@
 		  NULL, NULL, NULL, NULL, NULL);
 		pci_free_consistent(dev->pdev, sizeof(struct POSTSTATUS),
 		  post, paddr);
-		if ((buffer[0] == '0') && ((buffer[1] == 'x') || (buffer[1] == 'X'))) {
+		if (likely((buffer[0] == '0') && ((buffer[1] == 'x') || (buffer[1] == 'X')))) {
 			ret = (buffer[2] <= '9') ? (buffer[2] - '0') : (buffer[2] - 'A' + 10);
 			ret <<= 4;
 			ret += (buffer[3] <= '9') ? (buffer[3] - '0') : (buffer[3] - 'A' + 10);
@@ -364,7 +364,7 @@
 	/*
 	 *	Wait for the adapter to be up and running.
 	 */
-	if (!(status & KERNEL_UP_AND_RUNNING))
+	if (unlikely(!(status & KERNEL_UP_AND_RUNNING)))
 		return -3;
 	/*
 	 *	Everything is OK
@@ -387,7 +387,7 @@
 	unsigned long nointr = 0;
 
 	spin_lock_irqsave(q->lock, qflags);
-	aac_queue_get( dev, &Index, AdapNormCmdQueue, fib->hw_fib, 1, fib, &nointr);
+	aac_queue_get( dev, &Index, AdapNormCmdQueue, fib->hw_fib_va, 1, fib, &nointr);
 
 	q->numpending++;
 	*(q->headers.producer) = cpu_to_le32(Index + 1);
@@ -419,9 +419,9 @@
 	spin_unlock_irqrestore(q->lock, qflags);
 	for(;;) {
 		Index = rx_readl(dev, MUnit.InboundQueue);
-		if (Index == 0xFFFFFFFFL)
+		if (unlikely(Index == 0xFFFFFFFFL))
 			Index = rx_readl(dev, MUnit.InboundQueue);
-		if (Index != 0xFFFFFFFFL)
+		if (likely(Index != 0xFFFFFFFFL))
 			break;
 		if (--count == 0) {
 			spin_lock_irqsave(q->lock, qflags);
@@ -437,7 +437,7 @@
 	device += sizeof(u32);
 	writel((u32)(addr >> 32), device);
 	device += sizeof(u32);
-	writel(le16_to_cpu(fib->hw_fib->header.Size), device);
+	writel(le16_to_cpu(fib->hw_fib_va->header.Size), device);
 	rx_writel(dev, MUnit.InboundQueue, Index);
 	return 0;
 }
@@ -460,22 +460,34 @@
 	return 0;
 }
 
-static int aac_rx_restart_adapter(struct aac_dev *dev)
+static int aac_rx_restart_adapter(struct aac_dev *dev, int bled)
 {
 	u32 var;
 
-	printk(KERN_ERR "%s%d: adapter kernel panic'd.\n",
-			dev->name, dev->id);
+	if (bled)
+		printk(KERN_ERR "%s%d: adapter kernel panic'd %x.\n",
+			dev->name, dev->id, bled);
+	else {
+		bled = aac_adapter_sync_cmd(dev, IOP_RESET_ALWAYS,
+		  0, 0, 0, 0, 0, 0, &var, NULL, NULL, NULL, NULL);
+		if (!bled && (var != 0x00000001))
+			bled = -EINVAL;
+	}
+	if (bled && (bled != -ETIMEDOUT))
+		bled = aac_adapter_sync_cmd(dev, IOP_RESET,
+		  0, 0, 0, 0, 0, 0, &var, NULL, NULL, NULL, NULL);
 
-	if (aac_rx_check_health(dev) <= 0)
-		return 1;
-	if (rx_sync_cmd(dev, IOP_RESET, 0, 0, 0, 0, 0, 0,
-			&var, NULL, NULL, NULL, NULL))
-		return 1;
+	if (bled && (bled != -ETIMEDOUT))
+		return -EINVAL;
+	if (bled || (var == 0x3803000F)) { /* USE_OTHER_METHOD */
+		rx_writel(dev, MUnit.reserved2, 3);
+		msleep(5000); /* Delay 5 seconds */
+		var = 0x00000001;
+	}
 	if (var != 0x00000001)
-		 return 1;
+		return -EINVAL;
 	if (rx_readl(dev, MUnit.OMRx[0]) & KERNEL_PANIC)
-		return 1;
+		return -ENODEV;
 	return 0;
 }
 
@@ -517,24 +529,29 @@
 {
 	unsigned long start;
 	unsigned long status;
-	int instance;
-	const char * name;
-
-	instance = dev->id;
-	name     = dev->name;
+	int restart = 0;
+	int instance = dev->id;
+	const char * name = dev->name;
 
 	if (aac_adapter_ioremap(dev, dev->base_size)) {
 		printk(KERN_WARNING "%s: unable to map adapter.\n", name);
 		goto error_iounmap;
 	}
 
+	/* Failure to reset here is an option ... */
+	dev->OIMR = status = rx_readb (dev, MUnit.OIMR);
+	if ((((status & 0xff) != 0xff) || reset_devices) &&
+	  !aac_rx_restart_adapter(dev, 0))
+		++restart;
 	/*
 	 *	Check to see if the board panic'd while booting.
 	 */
 	status = rx_readl(dev, MUnit.OMRx[0]);
-	if (status & KERNEL_PANIC)
-		if (aac_rx_restart_adapter(dev))
+	if (status & KERNEL_PANIC) {
+		if (aac_rx_restart_adapter(dev, aac_rx_check_health(dev)))
 			goto error_iounmap;
+		++restart;
+	}
 	/*
 	 *	Check to see if the board failed any self tests.
 	 */
@@ -556,12 +573,23 @@
 	 */
 	while (!((status = rx_readl(dev, MUnit.OMRx[0])) & KERNEL_UP_AND_RUNNING))
 	{
-		if(time_after(jiffies, start+startup_timeout*HZ))
-		{
+		if ((restart &&
+		  (status & (KERNEL_PANIC|SELF_TEST_FAILED|MONITOR_PANIC))) ||
+		  time_after(jiffies, start+HZ*startup_timeout)) {
 			printk(KERN_ERR "%s%d: adapter kernel failed to start, init status = %lx.\n", 
 					dev->name, instance, status);
 			goto error_iounmap;
 		}
+		if (!restart &&
+		  ((status & (KERNEL_PANIC|SELF_TEST_FAILED|MONITOR_PANIC)) ||
+		  time_after(jiffies, start + HZ *
+		  ((startup_timeout > 60)
+		    ? (startup_timeout - 60)
+		    : (startup_timeout / 2))))) {
+			if (likely(!aac_rx_restart_adapter(dev, aac_rx_check_health(dev))))
+				start = jiffies;
+			++restart;
+		}
 		msleep(1);
 	}
 	/*
@@ -572,6 +600,7 @@
 	dev->a_ops.adapter_notify = aac_rx_notify_adapter;
 	dev->a_ops.adapter_sync_cmd = rx_sync_cmd;
 	dev->a_ops.adapter_check_health = aac_rx_check_health;
+	dev->a_ops.adapter_restart = aac_rx_restart_adapter;
 
 	/*
 	 *	First clear out all interrupts.  Then enable the one's that we
diff --git a/drivers/scsi/aic7xxx/Kconfig.aic79xx b/drivers/scsi/aic7xxx/Kconfig.aic79xx
index 911ea17..5e6620f 100644
--- a/drivers/scsi/aic7xxx/Kconfig.aic79xx
+++ b/drivers/scsi/aic7xxx/Kconfig.aic79xx
@@ -57,18 +57,6 @@
 	or modify the assembler Makefile or the files it includes if your
 	build environment is different than that of the author.
 
-config AIC79XX_ENABLE_RD_STRM
-	bool "Enable Read Streaming for All Targets"
-	depends on SCSI_AIC79XX
-	default n
-	help
-	Read Streaming is a U320 protocol option that should enhance
-	performance.  Early U320 drive firmware actually performs slower
-	with read streaming enabled so it is disabled by default.  Read
-	Streaming can be configured in much the same way as tagged queueing
-	using the "rd_strm" command line option.  See
-	drivers/scsi/aic7xxx/README.aic79xx for details.
-
 config AIC79XX_DEBUG_ENABLE
 	bool "Compile in Debugging Code"
 	depends on SCSI_AIC79XX
diff --git a/drivers/scsi/aic7xxx/Kconfig.aic7xxx b/drivers/scsi/aic7xxx/Kconfig.aic7xxx
index cd93f9a..88da670 100644
--- a/drivers/scsi/aic7xxx/Kconfig.aic7xxx
+++ b/drivers/scsi/aic7xxx/Kconfig.aic7xxx
@@ -50,16 +50,6 @@
 
 	Default: 5000 (5 seconds)
 
-config AIC7XXX_PROBE_EISA_VL
-	bool "Probe for EISA and VL AIC7XXX Adapters"
-	depends on SCSI_AIC7XXX && EISA
-	help
-	Probe for EISA and VLB Aic7xxx controllers.  In many newer systems,
-	the invasive probes necessary to detect these controllers can cause
-	other devices to fail.  For this reason, the non-PCI probe code is
-	disabled by default.  The current value of this option can be "toggled"
-	via the no_probe kernel command line option.
-
 config AIC7XXX_BUILD_FIRMWARE
 	bool "Build Adapter Firmware with Kernel Build"
 	depends on SCSI_AIC7XXX && !PREVENT_FIRMWARE_BUILD
diff --git a/drivers/scsi/aic7xxx/aic79xx_osm.c b/drivers/scsi/aic7xxx/aic79xx_osm.c
index 2be03e9..6054881 100644
--- a/drivers/scsi/aic7xxx/aic79xx_osm.c
+++ b/drivers/scsi/aic7xxx/aic79xx_osm.c
@@ -363,6 +363,8 @@
 				 struct scsi_cmnd *);
 static void ahd_linux_setup_tag_info_global(char *p);
 static int  aic79xx_setup(char *c);
+static void ahd_freeze_simq(struct ahd_softc *ahd);
+static void ahd_release_simq(struct ahd_softc *ahd);
 
 static int ahd_linux_unit;
 
@@ -2016,13 +2018,13 @@
 	cmd->scsi_done(cmd);
 }
 
-void
+static void
 ahd_freeze_simq(struct ahd_softc *ahd)
 {
 	scsi_block_requests(ahd->platform_data->host);
 }
 
-void
+static void
 ahd_release_simq(struct ahd_softc *ahd)
 {
 	scsi_unblock_requests(ahd->platform_data->host);
diff --git a/drivers/scsi/aic7xxx/aic79xx_osm.h b/drivers/scsi/aic7xxx/aic79xx_osm.h
index 147c83c..9218f29 100644
--- a/drivers/scsi/aic7xxx/aic79xx_osm.h
+++ b/drivers/scsi/aic7xxx/aic79xx_osm.h
@@ -837,8 +837,6 @@
 void	ahd_platform_free(struct ahd_softc *ahd);
 void	ahd_platform_init(struct ahd_softc *ahd);
 void	ahd_platform_freeze_devq(struct ahd_softc *ahd, struct scb *scb);
-void	ahd_freeze_simq(struct ahd_softc *ahd);
-void	ahd_release_simq(struct ahd_softc *ahd);
 
 static __inline void
 ahd_freeze_scb(struct scb *scb)
diff --git a/drivers/scsi/aic7xxx/aic7xxx.h b/drivers/scsi/aic7xxx/aic7xxx.h
index 954c7c2..e1bd57b 100644
--- a/drivers/scsi/aic7xxx/aic7xxx.h
+++ b/drivers/scsi/aic7xxx/aic7xxx.h
@@ -1278,11 +1278,6 @@
 	AHC_QUEUE_TAGGED
 } ahc_queue_alg;
 
-void			ahc_set_tags(struct ahc_softc *ahc,
-				     struct scsi_cmnd *cmd,
-				     struct ahc_devinfo *devinfo,
-				     ahc_queue_alg alg);
-
 /**************************** Target Mode *************************************/
 #ifdef AHC_TARGET_MODE
 void		ahc_send_lstate_events(struct ahc_softc *,
diff --git a/drivers/scsi/aic7xxx/aic7xxx_core.c b/drivers/scsi/aic7xxx/aic7xxx_core.c
index 50ef785..75733b0 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_core.c
+++ b/drivers/scsi/aic7xxx/aic7xxx_core.c
@@ -2073,7 +2073,7 @@
 /*
  * Update the current state of tagged queuing for a given target.
  */
-void
+static void
 ahc_set_tags(struct ahc_softc *ahc, struct scsi_cmnd *cmd,
 	     struct ahc_devinfo *devinfo, ahc_queue_alg alg)
 {
diff --git a/drivers/scsi/constants.c b/drivers/scsi/constants.c
index 61f6024..2a458d6 100644
--- a/drivers/scsi/constants.c
+++ b/drivers/scsi/constants.c
@@ -202,31 +202,29 @@
 }
 
 /* attempt to guess cdb length if cdb_len==0 . No trailing linefeed. */
-static void print_opcode_name(unsigned char * cdbp, int cdb_len,
-			      int start_of_line)
+static void print_opcode_name(unsigned char * cdbp, int cdb_len)
 {
 	int sa, len, cdb0;
 	const char * name;
-	const char * leadin = start_of_line ? KERN_INFO : "";
 
 	cdb0 = cdbp[0];
 	switch(cdb0) {
 	case VARIABLE_LENGTH_CMD:
 		len = cdbp[7] + 8;
 		if (len < 10) {
-			printk("%sshort variable length command, "
-			       "len=%d ext_len=%d", leadin, len, cdb_len);
+			printk("short variable length command, "
+			       "len=%d ext_len=%d", len, cdb_len);
 			break;
 		}
 		sa = (cdbp[8] << 8) + cdbp[9];
 		name = get_sa_name(maint_in_arr, MAINT_IN_SZ, sa);
 		if (name) {
-			printk("%s%s", leadin, name);
+			printk("%s", name);
 			if ((cdb_len > 0) && (len != cdb_len))
 				printk(", in_cdb_len=%d, ext_len=%d",
 				       len, cdb_len);
 		} else {
-			printk("%scdb[0]=0x%x, sa=0x%x", leadin, cdb0, sa);
+			printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa);
 			if ((cdb_len > 0) && (len != cdb_len))
 				printk(", in_cdb_len=%d, ext_len=%d",
 				       len, cdb_len);
@@ -236,83 +234,80 @@
 		sa = cdbp[1] & 0x1f;
 		name = get_sa_name(maint_in_arr, MAINT_IN_SZ, sa);
 		if (name)
-			printk("%s%s", leadin, name);
+			printk("%s", name);
 		else
-			printk("%scdb[0]=0x%x, sa=0x%x", leadin, cdb0, sa);
+			printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa);
 		break;
 	case MAINTENANCE_OUT:
 		sa = cdbp[1] & 0x1f;
 		name = get_sa_name(maint_out_arr, MAINT_OUT_SZ, sa);
 		if (name)
-			printk("%s%s", leadin, name);
+			printk("%s", name);
 		else
-			printk("%scdb[0]=0x%x, sa=0x%x", leadin, cdb0, sa);
+			printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa);
 		break;
 	case SERVICE_ACTION_IN_12:
 		sa = cdbp[1] & 0x1f;
 		name = get_sa_name(serv_in12_arr, SERV_IN12_SZ, sa);
 		if (name)
-			printk("%s%s", leadin, name);
+			printk("%s", name);
 		else
-			printk("%scdb[0]=0x%x, sa=0x%x", leadin, cdb0, sa);
+			printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa);
 		break;
 	case SERVICE_ACTION_OUT_12:
 		sa = cdbp[1] & 0x1f;
 		name = get_sa_name(serv_out12_arr, SERV_OUT12_SZ, sa);
 		if (name)
-			printk("%s%s", leadin, name);
+			printk("%s", name);
 		else
-			printk("%scdb[0]=0x%x, sa=0x%x", leadin, cdb0, sa);
+			printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa);
 		break;
 	case SERVICE_ACTION_IN_16:
 		sa = cdbp[1] & 0x1f;
 		name = get_sa_name(serv_in16_arr, SERV_IN16_SZ, sa);
 		if (name)
-			printk("%s%s", leadin, name);
+			printk("%s", name);
 		else
-			printk("%scdb[0]=0x%x, sa=0x%x", leadin, cdb0, sa);
+			printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa);
 		break;
 	case SERVICE_ACTION_OUT_16:
 		sa = cdbp[1] & 0x1f;
 		name = get_sa_name(serv_out16_arr, SERV_OUT16_SZ, sa);
 		if (name)
-			printk("%s%s", leadin, name);
+			printk("%s", name);
 		else
-			printk("%scdb[0]=0x%x, sa=0x%x", leadin, cdb0, sa);
+			printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa);
 		break;
 	default:
 		if (cdb0 < 0xc0) {
 			name = cdb_byte0_names[cdb0];
 			if (name)
-				printk("%s%s", leadin, name);
+				printk("%s", name);
 			else
-				printk("%scdb[0]=0x%x (reserved)",
-				       leadin, cdb0);
+				printk("cdb[0]=0x%x (reserved)", cdb0);
 		} else
-			printk("%scdb[0]=0x%x (vendor)", leadin, cdb0);
+			printk("cdb[0]=0x%x (vendor)", cdb0);
 		break;
 	}
 }
 
 #else /* ifndef CONFIG_SCSI_CONSTANTS */
 
-static void print_opcode_name(unsigned char * cdbp, int cdb_len,
-			      int start_of_line)
+static void print_opcode_name(unsigned char * cdbp, int cdb_len)
 {
 	int sa, len, cdb0;
-	const char * leadin = start_of_line ? KERN_INFO : "";
 
 	cdb0 = cdbp[0];
 	switch(cdb0) {
 	case VARIABLE_LENGTH_CMD:
 		len = cdbp[7] + 8;
 		if (len < 10) {
-			printk("%sshort opcode=0x%x command, len=%d "
-			       "ext_len=%d", leadin, cdb0, len, cdb_len);
+			printk("short opcode=0x%x command, len=%d "
+			       "ext_len=%d", cdb0, len, cdb_len);
 			break;
 		}
 		sa = (cdbp[8] << 8) + cdbp[9];
-		printk("%scdb[0]=0x%x, sa=0x%x", leadin, cdb0, sa);
+		printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa);
 		if (len != cdb_len)
 			printk(", in_cdb_len=%d, ext_len=%d", len, cdb_len);
 		break;
@@ -323,49 +318,48 @@
 	case SERVICE_ACTION_IN_16:
 	case SERVICE_ACTION_OUT_16:
 		sa = cdbp[1] & 0x1f;
-		printk("%scdb[0]=0x%x, sa=0x%x", leadin, cdb0, sa);
+		printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa);
 		break;
 	default:
 		if (cdb0 < 0xc0)
-			printk("%scdb[0]=0x%x", leadin, cdb0);
+			printk("cdb[0]=0x%x", cdb0);
 		else
-			printk("%scdb[0]=0x%x (vendor)", leadin, cdb0);
+			printk("cdb[0]=0x%x (vendor)", cdb0);
 		break;
 	}
 }
 #endif  
 
-void __scsi_print_command(unsigned char *command)
+void __scsi_print_command(unsigned char *cdb)
 {
 	int k, len;
 
-	print_opcode_name(command, 0, 1);
-	if (VARIABLE_LENGTH_CMD == command[0])
-		len = command[7] + 8;
+	print_opcode_name(cdb, 0);
+	if (VARIABLE_LENGTH_CMD == cdb[0])
+		len = cdb[7] + 8;
 	else
-		len = COMMAND_SIZE(command[0]);
+		len = COMMAND_SIZE(cdb[0]);
 	/* print out all bytes in cdb */
 	for (k = 0; k < len; ++k) 
-		printk(" %02x", command[k]);
+		printk(" %02x", cdb[k]);
 	printk("\n");
 }
 EXPORT_SYMBOL(__scsi_print_command);
 
-/* This function (perhaps with the addition of peripheral device type)
- * is more approriate than __scsi_print_command(). Perhaps that static
- * can be dropped later if it replaces the __scsi_print_command version.
- */
-static void scsi_print_cdb(unsigned char *cdb, int cdb_len, int start_of_line)
+void scsi_print_command(struct scsi_cmnd *cmd)
 {
 	int k;
 
-	print_opcode_name(cdb, cdb_len, start_of_line);
+	scmd_printk(KERN_INFO, cmd, "CDB: ");
+	print_opcode_name(cmd->cmnd, cmd->cmd_len);
+
 	/* print out all bytes in cdb */
 	printk(":");
-	for (k = 0; k < cdb_len; ++k) 
-		printk(" %02x", cdb[k]);
+	for (k = 0; k < cmd->cmd_len; ++k)
+		printk(" %02x", cmd->cmnd[k]);
 	printk("\n");
 }
+EXPORT_SYMBOL(scsi_print_command);
 
 /**
  *
@@ -410,7 +404,11 @@
 	const char * text;
 };
 
-static struct error_info additional[] =
+/*
+ * The canonical list of T10 Additional Sense Codes is available at:
+ * http://www.t10.org/lists/asc-num.txt
+ */
+static const struct error_info additional[] =
 {
 	{0x0000, "No additional sense information"},
 	{0x0001, "Filemark detected"},
@@ -714,6 +712,7 @@
 
 	{0x2F00, "Commands cleared by another initiator"},
 	{0x2F01, "Commands cleared by power loss notification"},
+	{0x2F02, "Commands cleared by device server"},
 
 	{0x3000, "Incompatible medium installed"},
 	{0x3001, "Cannot read medium - unknown format"},
@@ -1176,67 +1175,77 @@
 }
 EXPORT_SYMBOL(scsi_extd_sense_format);
 
-/* Print extended sense information; no leadin, no linefeed */
-static void
+void
 scsi_show_extd_sense(unsigned char asc, unsigned char ascq)
 {
-	const char *extd_sense_fmt = scsi_extd_sense_format(asc, ascq);
+        const char *extd_sense_fmt = scsi_extd_sense_format(asc, ascq);
 
 	if (extd_sense_fmt) {
 		if (strstr(extd_sense_fmt, "%x")) {
-			printk("Additional sense: ");
+			printk("Add. Sense: ");
 			printk(extd_sense_fmt, ascq);
 		} else
-			printk("Additional sense: %s", extd_sense_fmt);
+			printk("Add. Sense: %s", extd_sense_fmt);
 	} else {
 		if (asc >= 0x80)
-			printk("<<vendor>> ASC=0x%x ASCQ=0x%x", asc, ascq);
+			printk("<<vendor>> ASC=0x%x ASCQ=0x%x", asc,
+			       ascq);
 		if (ascq >= 0x80)
-			printk("ASC=0x%x <<vendor>> ASCQ=0x%x", asc, ascq);
+			printk("ASC=0x%x <<vendor>> ASCQ=0x%x", asc,
+			       ascq);
 		else
 			printk("ASC=0x%x ASCQ=0x%x", asc, ascq);
 	}
+
+	printk("\n");
 }
+EXPORT_SYMBOL(scsi_show_extd_sense);
 
 void
-scsi_print_sense_hdr(const char *name, struct scsi_sense_hdr *sshdr)
+scsi_show_sense_hdr(struct scsi_sense_hdr *sshdr)
 {
 	const char *sense_txt;
-	/* An example of deferred is when an earlier write to disk cache
-	 * succeeded, but now the disk discovers that it cannot write the
-	 * data to the magnetic media.
-	 */
-	const char *error = scsi_sense_is_deferred(sshdr) ? 
-		"<<DEFERRED>>" : "Current";
-	printk(KERN_INFO "%s: %s", name, error);
-	if (sshdr->response_code >= 0x72)
-		printk(" [descriptor]");
 
 	sense_txt = scsi_sense_key_string(sshdr->sense_key);
 	if (sense_txt)
-		printk(": sense key: %s\n", sense_txt);
+		printk("Sense Key : %s ", sense_txt);
 	else
-		printk(": sense key=0x%x\n", sshdr->sense_key);
-	printk(KERN_INFO "    ");
-	scsi_show_extd_sense(sshdr->asc, sshdr->ascq);
+		printk("Sense Key : 0x%x ", sshdr->sense_key);
+
+	printk("%s", scsi_sense_is_deferred(sshdr) ? "[deferred] " :
+	       "[current] ");
+
+	if (sshdr->response_code >= 0x72)
+		printk("[descriptor]");
+
 	printk("\n");
 }
+EXPORT_SYMBOL(scsi_show_sense_hdr);
+
+/*
+ * Print normalized SCSI sense header with a prefix.
+ */
+void
+scsi_print_sense_hdr(const char *name, struct scsi_sense_hdr *sshdr)
+{
+	printk(KERN_INFO "%s: ", name);
+	scsi_show_sense_hdr(sshdr);
+	printk(KERN_INFO "%s: ", name);
+	scsi_show_extd_sense(sshdr->asc, sshdr->ascq);
+}
 EXPORT_SYMBOL(scsi_print_sense_hdr);
 
-/* Print sense information */
 void
-__scsi_print_sense(const char *name, const unsigned char *sense_buffer,
-		   int sense_len)
+scsi_decode_sense_buffer(const unsigned char *sense_buffer, int sense_len,
+		       struct scsi_sense_hdr *sshdr)
 {
 	int k, num, res;
-	unsigned int info;
-	struct scsi_sense_hdr ssh;
     
-	res = scsi_normalize_sense(sense_buffer, sense_len, &ssh);
+	res = scsi_normalize_sense(sense_buffer, sense_len, sshdr);
 	if (0 == res) {
 		/* this may be SCSI-1 sense data */
 		num = (sense_len < 32) ? sense_len : 32;
-		printk(KERN_INFO "Unrecognized sense data (in hex):");
+		printk("Unrecognized sense data (in hex):");
 		for (k = 0; k < num; ++k) {
 			if (0 == (k % 16)) {
 				printk("\n");
@@ -1247,11 +1256,20 @@
 		printk("\n");
 		return;
 	}
-	scsi_print_sense_hdr(name, &ssh);
-	if (ssh.response_code < 0x72) {
+}
+
+void
+scsi_decode_sense_extras(const unsigned char *sense_buffer, int sense_len,
+			 struct scsi_sense_hdr *sshdr)
+{
+	int k, num, res;
+
+	if (sshdr->response_code < 0x72)
+	{
 		/* only decode extras for "fixed" format now */
 		char buff[80];
 		int blen, fixed_valid;
+		unsigned int info;
 
 		fixed_valid = sense_buffer[0] & 0x80;
 		info = ((sense_buffer[3] << 24) | (sense_buffer[4] << 16) |
@@ -1281,13 +1299,13 @@
 			res += snprintf(buff + res, blen - res, "ILI");
 		}
 		if (res > 0)
-			printk(KERN_INFO "%s\n", buff);
-	} else if (ssh.additional_length > 0) {
+			printk("%s\n", buff);
+	} else if (sshdr->additional_length > 0) {
 		/* descriptor format with sense descriptors */
-		num = 8 + ssh.additional_length;
+		num = 8 + sshdr->additional_length;
 		num = (sense_len < num) ? sense_len : num;
-		printk(KERN_INFO "Descriptor sense data with sense "
-		       "descriptors (in hex):");
+		printk("Descriptor sense data with sense descriptors "
+		       "(in hex):");
 		for (k = 0; k < num; ++k) {
 			if (0 == (k % 16)) {
 				printk("\n");
@@ -1295,30 +1313,43 @@
 			}
 			printk("%02x ", sense_buffer[k]);
 		}
+
 		printk("\n");
 	}
+
+}
+
+/* Normalize and print sense buffer with name prefix */
+void __scsi_print_sense(const char *name, const unsigned char *sense_buffer,
+			int sense_len)
+{
+	struct scsi_sense_hdr sshdr;
+
+	printk(KERN_INFO "%s: ", name);
+	scsi_decode_sense_buffer(sense_buffer, sense_len, &sshdr);
+	scsi_show_sense_hdr(&sshdr);
+	scsi_decode_sense_extras(sense_buffer, sense_len, &sshdr);
+	printk(KERN_INFO "%s: ", name);
+	scsi_show_extd_sense(sshdr.asc, sshdr.ascq);
 }
 EXPORT_SYMBOL(__scsi_print_sense);
 
-void scsi_print_sense(const char *devclass, struct scsi_cmnd *cmd)
+/* Normalize and print sense buffer in SCSI command */
+void scsi_print_sense(char *name, struct scsi_cmnd *cmd)
 {
-	const char *name = devclass;
+	struct scsi_sense_hdr sshdr;
 
-	if (cmd->request->rq_disk)
-		name = cmd->request->rq_disk->disk_name;
-	__scsi_print_sense(name, cmd->sense_buffer, SCSI_SENSE_BUFFERSIZE);
+	scmd_printk(KERN_INFO, cmd, "");
+	scsi_decode_sense_buffer(cmd->sense_buffer, SCSI_SENSE_BUFFERSIZE,
+				 &sshdr);
+	scsi_show_sense_hdr(&sshdr);
+	scsi_decode_sense_extras(cmd->sense_buffer, SCSI_SENSE_BUFFERSIZE,
+				 &sshdr);
+	scmd_printk(KERN_INFO, cmd, "");
+	scsi_show_extd_sense(sshdr.asc, sshdr.ascq);
 }
 EXPORT_SYMBOL(scsi_print_sense);
 
-void scsi_print_command(struct scsi_cmnd *cmd)
-{
-	/* Assume appended output (i.e. not at start of line) */
-	sdev_printk("", cmd->device, "\n");
-	printk(KERN_INFO "        command: ");
-	scsi_print_cdb(cmd->cmnd, cmd->cmd_len, 0);
-}
-EXPORT_SYMBOL(scsi_print_command);
-
 #ifdef CONFIG_SCSI_CONSTANTS
 
 static const char * const hostbyte_table[]={
@@ -1327,25 +1358,6 @@
 "DID_PASSTHROUGH", "DID_SOFT_ERROR", "DID_IMM_RETRY"};
 #define NUM_HOSTBYTE_STRS ARRAY_SIZE(hostbyte_table)
 
-void scsi_print_hostbyte(int scsiresult)
-{
-	int hb = host_byte(scsiresult);
-
-	printk("Hostbyte=0x%02x", hb);
-	if (hb < NUM_HOSTBYTE_STRS)
-		printk("(%s) ", hostbyte_table[hb]);
-	else
-		printk("is invalid ");
-}
-#else
-void scsi_print_hostbyte(int scsiresult)
-{
-	printk("Hostbyte=0x%02x ", host_byte(scsiresult));
-}
-#endif
-
-#ifdef CONFIG_SCSI_CONSTANTS
-
 static const char * const driverbyte_table[]={
 "DRIVER_OK", "DRIVER_BUSY", "DRIVER_SOFT",  "DRIVER_MEDIA", "DRIVER_ERROR",
 "DRIVER_INVALID", "DRIVER_TIMEOUT", "DRIVER_HARD", "DRIVER_SENSE"};
@@ -1356,19 +1368,35 @@
 "SUGGEST_5", "SUGGEST_6", "SUGGEST_7", "SUGGEST_SENSE"};
 #define NUM_SUGGEST_STRS ARRAY_SIZE(driversuggest_table)
 
-void scsi_print_driverbyte(int scsiresult)
+void scsi_show_result(int result)
 {
-	int dr = (driver_byte(scsiresult) & DRIVER_MASK);
-	int su = ((driver_byte(scsiresult) & SUGGEST_MASK) >> 4);
+	int hb = host_byte(result);
+	int db = (driver_byte(result) & DRIVER_MASK);
+	int su = ((driver_byte(result) & SUGGEST_MASK) >> 4);
 
-	printk("Driverbyte=0x%02x ", driver_byte(scsiresult));
-	printk("(%s,%s) ",
-	       (dr < NUM_DRIVERBYTE_STRS ? driverbyte_table[dr] : "invalid"),
+	printk("Result: hostbyte=%s driverbyte=%s,%s\n",
+	       (hb < NUM_HOSTBYTE_STRS ? hostbyte_table[hb]     : "invalid"),
+	       (db < NUM_DRIVERBYTE_STRS ? driverbyte_table[db] : "invalid"),
 	       (su < NUM_SUGGEST_STRS ? driversuggest_table[su] : "invalid"));
 }
+
 #else
-void scsi_print_driverbyte(int scsiresult)
+
+void scsi_show_result(int result)
 {
-	printk("Driverbyte=0x%02x ", driver_byte(scsiresult));
+	printk("Result: hostbyte=0x%02x driverbyte=0x%02x\n",
+	       host_byte(result), driver_byte(result));
 }
+
 #endif
+EXPORT_SYMBOL(scsi_show_result);
+
+
+void scsi_print_result(struct scsi_cmnd *cmd)
+{
+	scmd_printk(KERN_INFO, cmd, "");
+	scsi_show_result(cmd->result);
+}
+EXPORT_SYMBOL(scsi_print_result);
+
+
diff --git a/drivers/scsi/dpt/dpti_i2o.h b/drivers/scsi/dpt/dpti_i2o.h
index 5a49216..100b49ba 100644
--- a/drivers/scsi/dpt/dpti_i2o.h
+++ b/drivers/scsi/dpt/dpti_i2o.h
@@ -31,7 +31,7 @@
  *	Tunable parameters first
  */
 
-/* How many different OSM's are we allowing */ 
+/* How many different OSM's are we allowing */
 #define MAX_I2O_MODULES		64
 
 #define I2O_EVT_CAPABILITY_OTHER		0x01
@@ -63,7 +63,7 @@
 	u16	size;
 	u32	target_tid:12;
 	u32	init_tid:12;
-	u32	function:8;	
+	u32	function:8;
 	u32	initiator_context;
 	/* List follows */
 };
@@ -77,7 +77,7 @@
 
 	char dev_name[8];		/* linux /dev name if available */
 	i2o_lct_entry lct_data;/* Device LCT information */
-	u32 flags;		
+	u32 flags;
 	struct proc_dir_entry* proc_entry;	/* /proc dir */
 	struct adpt_device *owner;
 	struct _adpt_hba *controller;	/* Controlling IOP */
@@ -86,7 +86,7 @@
 /*
  *	Each I2O controller has one of these objects
  */
- 
+
 struct i2o_controller
 {
 	char name[16];
@@ -111,9 +111,9 @@
 	u32	iop_id:12;
 	u32	reserved2:20;
 	u16	seg_num:12;
-	u16 	i2o_version:4;
-	u8 	iop_state;
-	u8 	msg_type;
+	u16	i2o_version:4;
+	u8	iop_state;
+	u8	msg_type;
 	u16	frame_size;
 	u16	reserved3;
 	u32	last_changed;
@@ -124,14 +124,14 @@
 
 struct i2o_sys_tbl
 {
-	u8 	num_entries;
-	u8 	version;
-	u16 	reserved1;
+	u8	num_entries;
+	u8	version;
+	u16	reserved1;
 	u32	change_ind;
 	u32	reserved2;
 	u32	reserved3;
 	struct i2o_sys_tbl_entry iops[0];
-};	
+};
 
 /*
  *	I2O classes / subclasses
@@ -146,7 +146,7 @@
 /*  Class code names
  *  (from v1.5 Table 6-1 Class Code Assignments.)
  */
- 
+
 #define    I2O_CLASS_EXECUTIVE                         0x000
 #define    I2O_CLASS_DDM                               0x001
 #define    I2O_CLASS_RANDOM_BLOCK_STORAGE              0x010
@@ -166,7 +166,7 @@
 
 /*  Rest of 0x092 - 0x09f reserved for peer-to-peer classes
  */
- 
+
 #define    I2O_CLASS_MATCH_ANYCLASS                    0xffffffff
 
 /*  Subclasses
@@ -175,7 +175,7 @@
 #define    I2O_SUBCLASS_i960                           0x001
 #define    I2O_SUBCLASS_HDM                            0x020
 #define    I2O_SUBCLASS_ISM                            0x021
- 
+
 /* Operation functions */
 
 #define I2O_PARAMS_FIELD_GET	0x0001
@@ -219,7 +219,7 @@
 /*
  *	Messaging API values
  */
- 
+
 #define	I2O_CMD_ADAPTER_ASSIGN		0xB3
 #define	I2O_CMD_ADAPTER_READ		0xB2
 #define	I2O_CMD_ADAPTER_RELEASE		0xB5
@@ -284,16 +284,16 @@
 #define I2O_PRIVATE_MSG			0xFF
 
 /*
- *	Init Outbound Q status 
+ *	Init Outbound Q status
  */
- 
+
 #define I2O_CMD_OUTBOUND_INIT_IN_PROGRESS	0x01
 #define I2O_CMD_OUTBOUND_INIT_REJECTED		0x02
 #define I2O_CMD_OUTBOUND_INIT_FAILED		0x03
 #define I2O_CMD_OUTBOUND_INIT_COMPLETE		0x04
 
 /*
- *	I2O Get Status State values 
+ *	I2O Get Status State values
  */
 
 #define	ADAPTER_STATE_INITIALIZING		0x01
@@ -303,7 +303,7 @@
 #define	ADAPTER_STATE_OPERATIONAL		0x08
 #define	ADAPTER_STATE_FAILED			0x10
 #define	ADAPTER_STATE_FAULTED			0x11
-	
+
 /* I2O API function return values */
 
 #define I2O_RTN_NO_ERROR			0
@@ -321,9 +321,9 @@
 
 /* Reply message status defines for all messages */
 
-#define I2O_REPLY_STATUS_SUCCESS                    	0x00
-#define I2O_REPLY_STATUS_ABORT_DIRTY                	0x01
-#define I2O_REPLY_STATUS_ABORT_NO_DATA_TRANSFER     	0x02
+#define I2O_REPLY_STATUS_SUCCESS			0x00
+#define I2O_REPLY_STATUS_ABORT_DIRTY			0x01
+#define I2O_REPLY_STATUS_ABORT_NO_DATA_TRANSFER		0x02
 #define	I2O_REPLY_STATUS_ABORT_PARTIAL_TRANSFER		0x03
 #define	I2O_REPLY_STATUS_ERROR_DIRTY			0x04
 #define	I2O_REPLY_STATUS_ERROR_NO_DATA_TRANSFER		0x05
@@ -338,7 +338,7 @@
 
 #define I2O_PARAMS_STATUS_SUCCESS		0x00
 #define I2O_PARAMS_STATUS_BAD_KEY_ABORT		0x01
-#define I2O_PARAMS_STATUS_BAD_KEY_CONTINUE   	0x02
+#define I2O_PARAMS_STATUS_BAD_KEY_CONTINUE	0x02
 #define I2O_PARAMS_STATUS_BUFFER_FULL		0x03
 #define I2O_PARAMS_STATUS_BUFFER_TOO_SMALL	0x04
 #define I2O_PARAMS_STATUS_FIELD_UNREADABLE	0x05
@@ -390,7 +390,7 @@
 #define	I2O_CLAIM_MANAGEMENT					0x02000000
 #define	I2O_CLAIM_AUTHORIZED					0x03000000
 #define	I2O_CLAIM_SECONDARY					0x04000000
- 
+
 /* Message header defines for VersionOffset */
 #define I2OVER15	0x0001
 #define I2OVER20	0x0002
diff --git a/drivers/scsi/dpt/dpti_ioctl.h b/drivers/scsi/dpt/dpti_ioctl.h
index 82d2486..cc784e8 100644
--- a/drivers/scsi/dpt/dpti_ioctl.h
+++ b/drivers/scsi/dpt/dpti_ioctl.h
@@ -99,7 +99,7 @@
 	uCHAR    eataVersion;      /* EATA Version                    */
 	uLONG    cpLength;         /* EATA Command Packet Length      */
 	uLONG    spLength;         /* EATA Status Packet Length       */
-	uCHAR    drqNum;           /* DRQ Index (0,5,6,7)             */ 
+	uCHAR    drqNum;           /* DRQ Index (0,5,6,7)             */
 	uCHAR    flag1;            /* EATA Flags 1 (Byte 9)           */
 	uCHAR    flag2;            /* EATA Flags 2 (Byte 30)          */
 } CtrlInfo;
diff --git a/drivers/scsi/dpt/dptsig.h b/drivers/scsi/dpt/dptsig.h
index 4bf4477..94bc894 100644
--- a/drivers/scsi/dpt/dptsig.h
+++ b/drivers/scsi/dpt/dptsig.h
@@ -145,8 +145,8 @@
 #define FT_LOGGER       12      /* Event Logger */
 #define FT_INSTALL      13      /* An Install Program */
 #define FT_LIBRARY      14      /* Storage Manager Real-Mode Calls */
-#define FT_RESOURCE 	15 	/* Storage Manager Resource File */
-#define FT_MODEM_DB  	16  	/* Storage Manager Modem Database */
+#define FT_RESOURCE	15	/* Storage Manager Resource File */
+#define FT_MODEM_DB	16	/* Storage Manager Modem Database */
 
 /* Filetype flags - sigBYTE dsFiletypeFlags;    FLAG BITS */
 /* ------------------------------------------------------------------ */
diff --git a/drivers/scsi/dpt_i2o.c b/drivers/scsi/dpt_i2o.c
index cd36e81..f7b9dbd 100644
--- a/drivers/scsi/dpt_i2o.c
+++ b/drivers/scsi/dpt_i2o.c
@@ -195,8 +195,6 @@
 			pci_dev_get(pDev);
 		}
 	}
-	if (pDev)
-		pci_dev_put(pDev);
 
 	/* In INIT state, Activate IOPs */
 	for (pHba = hba_chain; pHba; pHba = pHba->next) {
diff --git a/drivers/scsi/eata_generic.h b/drivers/scsi/eata_generic.h
index 635c148..5016af5c 100644
--- a/drivers/scsi/eata_generic.h
+++ b/drivers/scsi/eata_generic.h
@@ -18,13 +18,6 @@
  * Misc. definitions			     *
  *********************************************/
 
-#ifndef TRUE
-#define TRUE 1
-#endif
-#ifndef FALSE
-#define FALSE 0
-#endif
-
 #define R_LIMIT 0x20000
 
 #define MAXISA	   4
diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c
index fbc1d5c..b10eefe 100644
--- a/drivers/scsi/ibmvscsi/ibmvscsi.c
+++ b/drivers/scsi/ibmvscsi/ibmvscsi.c
@@ -85,7 +85,7 @@
 static int max_id = 64;
 static int max_channel = 3;
 static int init_timeout = 5;
-static int max_requests = 50;
+static int max_requests = IBMVSCSI_MAX_REQUESTS_DEFAULT;
 
 #define IBMVSCSI_VERSION "1.5.8"
 
@@ -538,7 +538,8 @@
 	int request_status;
 	int rc;
 
-	/* If we have exhausted our request limit, just fail this request.
+	/* If we have exhausted our request limit, just fail this request,
+	 * unless it is for a reset or abort.
 	 * Note that there are rare cases involving driver generated requests 
 	 * (such as task management requests) that the mid layer may think we
 	 * can handle more requests (can_queue) when we actually can't
@@ -551,9 +552,30 @@
 		 */
 		if (request_status < -1)
 			goto send_error;
-		/* Otherwise, if we have run out of requests */
-		else if (request_status < 0)
-			goto send_busy;
+		/* Otherwise, we may have run out of requests. */
+		/* Abort and reset calls should make it through.
+		 * Nothing except abort and reset should use the last two
+		 * slots unless we had two or less to begin with.
+		 */
+		else if (request_status < 2 &&
+		         evt_struct->iu.srp.cmd.opcode != SRP_TSK_MGMT) {
+			/* In the case that we have less than two requests
+			 * available, check the server limit as a combination
+			 * of the request limit and the number of requests
+			 * in-flight (the size of the send list).  If the
+			 * server limit is greater than 2, return busy so
+			 * that the last two are reserved for reset and abort.
+			 */
+			int server_limit = request_status;
+			struct srp_event_struct *tmp_evt;
+
+			list_for_each_entry(tmp_evt, &hostdata->sent, list) {
+				server_limit++;
+			}
+
+			if (server_limit > 2)
+				goto send_busy;
+		}
 	}
 
 	/* Copy the IU into the transfer area */
@@ -572,6 +594,7 @@
 
 		printk(KERN_ERR "ibmvscsi: send error %d\n",
 		       rc);
+		atomic_inc(&hostdata->request_limit);
 		goto send_error;
 	}
 
@@ -581,7 +604,8 @@
 	unmap_cmd_data(&evt_struct->iu.srp.cmd, evt_struct, hostdata->dev);
 
 	free_event_struct(&hostdata->pool, evt_struct);
- 	return SCSI_MLQUEUE_HOST_BUSY;
+	atomic_inc(&hostdata->request_limit);
+	return SCSI_MLQUEUE_HOST_BUSY;
 
  send_error:
 	unmap_cmd_data(&evt_struct->iu.srp.cmd, evt_struct, hostdata->dev);
@@ -831,23 +855,16 @@
 
 	printk(KERN_INFO "ibmvscsi: SRP_LOGIN succeeded\n");
 
-	if (evt_struct->xfer_iu->srp.login_rsp.req_lim_delta >
-	    (max_requests - 2))
-		evt_struct->xfer_iu->srp.login_rsp.req_lim_delta =
-		    max_requests - 2;
+	if (evt_struct->xfer_iu->srp.login_rsp.req_lim_delta < 0)
+		printk(KERN_ERR "ibmvscsi: Invalid request_limit.\n");
 
-	/* Now we know what the real request-limit is */
+	/* Now we know what the real request-limit is.
+	 * This value is set rather than added to request_limit because
+	 * request_limit could have been set to -1 by this client.
+	 */
 	atomic_set(&hostdata->request_limit,
 		   evt_struct->xfer_iu->srp.login_rsp.req_lim_delta);
 
-	hostdata->host->can_queue =
-	    evt_struct->xfer_iu->srp.login_rsp.req_lim_delta - 2;
-
-	if (hostdata->host->can_queue < 1) {
-		printk(KERN_ERR "ibmvscsi: Invalid request_limit_delta\n");
-		return;
-	}
-
 	/* If we had any pending I/Os, kick them */
 	scsi_unblock_requests(hostdata->host);
 
@@ -1337,6 +1354,27 @@
 	return rc;
 }
 
+/**
+ * ibmvscsi_slave_configure: Set the "allow_restart" flag for each disk.
+ * @sdev:	struct scsi_device device to configure
+ *
+ * Enable allow_restart for a device if it is a disk.  Adjust the
+ * queue_depth here also as is required by the documentation for
+ * struct scsi_host_template.
+ */
+static int ibmvscsi_slave_configure(struct scsi_device *sdev)
+{
+	struct Scsi_Host *shost = sdev->host;
+	unsigned long lock_flags = 0;
+
+	spin_lock_irqsave(shost->host_lock, lock_flags);
+	if (sdev->type == TYPE_DISK)
+		sdev->allow_restart = 1;
+	scsi_adjust_queue_depth(sdev, 0, shost->cmd_per_lun);
+	spin_unlock_irqrestore(shost->host_lock, lock_flags);
+	return 0;
+}
+
 /* ------------------------------------------------------------
  * sysfs attributes
  */
@@ -1482,8 +1520,9 @@
 	.queuecommand = ibmvscsi_queuecommand,
 	.eh_abort_handler = ibmvscsi_eh_abort_handler,
 	.eh_device_reset_handler = ibmvscsi_eh_device_reset_handler,
+	.slave_configure = ibmvscsi_slave_configure,
 	.cmd_per_lun = 16,
-	.can_queue = 1,		/* Updated after SRP_LOGIN */
+	.can_queue = IBMVSCSI_MAX_REQUESTS_DEFAULT,
 	.this_id = -1,
 	.sg_tablesize = SG_ALL,
 	.use_clustering = ENABLE_CLUSTERING,
@@ -1503,6 +1542,7 @@
 
 	vdev->dev.driver_data = NULL;
 
+	driver_template.can_queue = max_requests;
 	host = scsi_host_alloc(&driver_template, sizeof(*hostdata));
 	if (!host) {
 		printk(KERN_ERR "ibmvscsi: couldn't allocate host data\n");
diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.h b/drivers/scsi/ibmvscsi/ibmvscsi.h
index 5c6d935..77cc1d4 100644
--- a/drivers/scsi/ibmvscsi/ibmvscsi.h
+++ b/drivers/scsi/ibmvscsi/ibmvscsi.h
@@ -44,6 +44,8 @@
  */
 #define MAX_INDIRECT_BUFS 10
 
+#define IBMVSCSI_MAX_REQUESTS_DEFAULT 100
+
 /* ------------------------------------------------------------
  * Data Structures
  */
diff --git a/drivers/scsi/ibmvscsi/ibmvstgt.c b/drivers/scsi/ibmvscsi/ibmvstgt.c
index a39a478..6d223dd 100644
--- a/drivers/scsi/ibmvscsi/ibmvstgt.c
+++ b/drivers/scsi/ibmvscsi/ibmvstgt.c
@@ -35,7 +35,7 @@
 #include "ibmvscsi.h"
 
 #define	INITIAL_SRP_LIMIT	16
-#define	DEFAULT_MAX_SECTORS	512
+#define	DEFAULT_MAX_SECTORS	256
 
 #define	TGT_NAME	"ibmvstgt"
 
@@ -248,8 +248,8 @@
 						  md[i].va + mdone);
 
 			if (err != H_SUCCESS) {
-				eprintk("rdma error %d %d\n", dir, slen);
-				goto out;
+				eprintk("rdma error %d %d %ld\n", dir, slen, err);
+				return -EIO;
 			}
 
 			mlen -= slen;
@@ -265,45 +265,35 @@
 				if (sidx > nsg) {
 					eprintk("out of sg %p %d %d\n",
 						iue, sidx, nsg);
-					goto out;
+					return -EIO;
 				}
 			}
 		};
 
 		rest -= mlen;
 	}
-out:
-
 	return 0;
 }
 
-static int ibmvstgt_transfer_data(struct scsi_cmnd *sc,
-				  void (*done)(struct scsi_cmnd *))
-{
-	struct iu_entry	*iue = (struct iu_entry *) sc->SCp.ptr;
-	int err;
-
-	err = srp_transfer_data(sc, &vio_iu(iue)->srp.cmd, ibmvstgt_rdma, 1, 1);
-
-	done(sc);
-
-	return err;
-}
-
 static int ibmvstgt_cmd_done(struct scsi_cmnd *sc,
 			     void (*done)(struct scsi_cmnd *))
 {
 	unsigned long flags;
 	struct iu_entry *iue = (struct iu_entry *) sc->SCp.ptr;
 	struct srp_target *target = iue->target;
+	int err = 0;
 
-	dprintk("%p %p %x\n", iue, target, vio_iu(iue)->srp.cmd.cdb[0]);
+	dprintk("%p %p %x %u\n", iue, target, vio_iu(iue)->srp.cmd.cdb[0],
+		cmd->usg_sg);
+
+	if (sc->use_sg)
+		err = srp_transfer_data(sc, &vio_iu(iue)->srp.cmd, ibmvstgt_rdma, 1, 1);
 
 	spin_lock_irqsave(&target->lock, flags);
 	list_del(&iue->ilist);
 	spin_unlock_irqrestore(&target->lock, flags);
 
-	if (sc->result != SAM_STAT_GOOD) {
+	if (err|| sc->result != SAM_STAT_GOOD) {
 		eprintk("operation failed %p %d %x\n",
 			iue, sc->result, vio_iu(iue)->srp.cmd.cdb[0]);
 		send_rsp(iue, sc, HARDWARE_ERROR, 0x00);
@@ -503,7 +493,8 @@
 {
 	struct vio_port *vport = target_to_port(target);
 	struct iu_entry *iue;
-	long err, done;
+	long err;
+	int done = 1;
 
 	iue = srp_iu_get(target);
 	if (!iue) {
@@ -518,7 +509,6 @@
 
 	if (err != H_SUCCESS) {
 		eprintk("%ld transferring data error %p\n", err, iue);
-		done = 1;
 		goto out;
 	}
 
@@ -794,7 +784,6 @@
 	.use_clustering		= DISABLE_CLUSTERING,
 	.max_sectors		= DEFAULT_MAX_SECTORS,
 	.transfer_response	= ibmvstgt_cmd_done,
-	.transfer_data		= ibmvstgt_transfer_data,
 	.eh_abort_handler	= ibmvstgt_eh_abort_handler,
 	.tsk_mgmt_response	= ibmvstgt_tsk_mgmt_response,
 	.shost_attrs		= ibmvstgt_attrs,
diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index e9bd299..2c7b77e 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -89,10 +89,9 @@
 static unsigned int ipr_max_speed = 1;
 static int ipr_testmode = 0;
 static unsigned int ipr_fastfail = 0;
-static unsigned int ipr_transop_timeout = IPR_OPERATIONAL_TIMEOUT;
+static unsigned int ipr_transop_timeout = 0;
 static unsigned int ipr_enable_cache = 1;
 static unsigned int ipr_debug = 0;
-static int ipr_auto_create = 1;
 static DEFINE_SPINLOCK(ipr_driver_lock);
 
 /* This table describes the differences between DMA controller chips */
@@ -159,15 +158,13 @@
 MODULE_PARM_DESC(enable_cache, "Enable adapter's non-volatile write cache (default: 1)");
 module_param_named(debug, ipr_debug, int, 0);
 MODULE_PARM_DESC(debug, "Enable device driver debugging logging. Set to 1 to enable. (default: 0)");
-module_param_named(auto_create, ipr_auto_create, int, 0);
-MODULE_PARM_DESC(auto_create, "Auto-create single device RAID 0 arrays when initialized (default: 1)");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(IPR_DRIVER_VERSION);
 
 /*  A constant array of IOASCs/URCs/Error Messages */
 static const
 struct ipr_error_table_t ipr_error_table[] = {
-	{0x00000000, 1, 1,
+	{0x00000000, 1, IPR_DEFAULT_LOG_LEVEL,
 	"8155: An unknown error was received"},
 	{0x00330000, 0, 0,
 	"Soft underlength error"},
@@ -175,37 +172,37 @@
 	"Command to be cancelled not found"},
 	{0x00808000, 0, 0,
 	"Qualified success"},
-	{0x01080000, 1, 1,
+	{0x01080000, 1, IPR_DEFAULT_LOG_LEVEL,
 	"FFFE: Soft device bus error recovered by the IOA"},
-	{0x01088100, 0, 1,
+	{0x01088100, 0, IPR_DEFAULT_LOG_LEVEL,
 	"4101: Soft device bus fabric error"},
-	{0x01170600, 0, 1,
+	{0x01170600, 0, IPR_DEFAULT_LOG_LEVEL,
 	"FFF9: Device sector reassign successful"},
-	{0x01170900, 0, 1,
+	{0x01170900, 0, IPR_DEFAULT_LOG_LEVEL,
 	"FFF7: Media error recovered by device rewrite procedures"},
-	{0x01180200, 0, 1,
+	{0x01180200, 0, IPR_DEFAULT_LOG_LEVEL,
 	"7001: IOA sector reassignment successful"},
-	{0x01180500, 0, 1,
+	{0x01180500, 0, IPR_DEFAULT_LOG_LEVEL,
 	"FFF9: Soft media error. Sector reassignment recommended"},
-	{0x01180600, 0, 1,
+	{0x01180600, 0, IPR_DEFAULT_LOG_LEVEL,
 	"FFF7: Media error recovered by IOA rewrite procedures"},
-	{0x01418000, 0, 1,
+	{0x01418000, 0, IPR_DEFAULT_LOG_LEVEL,
 	"FF3D: Soft PCI bus error recovered by the IOA"},
-	{0x01440000, 1, 1,
+	{0x01440000, 1, IPR_DEFAULT_LOG_LEVEL,
 	"FFF6: Device hardware error recovered by the IOA"},
-	{0x01448100, 0, 1,
+	{0x01448100, 0, IPR_DEFAULT_LOG_LEVEL,
 	"FFF6: Device hardware error recovered by the device"},
-	{0x01448200, 1, 1,
+	{0x01448200, 1, IPR_DEFAULT_LOG_LEVEL,
 	"FF3D: Soft IOA error recovered by the IOA"},
-	{0x01448300, 0, 1,
+	{0x01448300, 0, IPR_DEFAULT_LOG_LEVEL,
 	"FFFA: Undefined device response recovered by the IOA"},
-	{0x014A0000, 1, 1,
+	{0x014A0000, 1, IPR_DEFAULT_LOG_LEVEL,
 	"FFF6: Device bus error, message or command phase"},
-	{0x014A8000, 0, 1,
+	{0x014A8000, 0, IPR_DEFAULT_LOG_LEVEL,
 	"FFFE: Task Management Function failed"},
-	{0x015D0000, 0, 1,
+	{0x015D0000, 0, IPR_DEFAULT_LOG_LEVEL,
 	"FFF6: Failure prediction threshold exceeded"},
-	{0x015D9200, 0, 1,
+	{0x015D9200, 0, IPR_DEFAULT_LOG_LEVEL,
 	"8009: Impending cache battery pack failure"},
 	{0x02040400, 0, 0,
 	"34FF: Disk device format in progress"},
@@ -215,85 +212,85 @@
 	"No ready, IOA shutdown"},
 	{0x025A0000, 0, 0,
 	"Not ready, IOA has been shutdown"},
-	{0x02670100, 0, 1,
+	{0x02670100, 0, IPR_DEFAULT_LOG_LEVEL,
 	"3020: Storage subsystem configuration error"},
 	{0x03110B00, 0, 0,
 	"FFF5: Medium error, data unreadable, recommend reassign"},
 	{0x03110C00, 0, 0,
 	"7000: Medium error, data unreadable, do not reassign"},
-	{0x03310000, 0, 1,
+	{0x03310000, 0, IPR_DEFAULT_LOG_LEVEL,
 	"FFF3: Disk media format bad"},
-	{0x04050000, 0, 1,
+	{0x04050000, 0, IPR_DEFAULT_LOG_LEVEL,
 	"3002: Addressed device failed to respond to selection"},
-	{0x04080000, 1, 1,
+	{0x04080000, 1, IPR_DEFAULT_LOG_LEVEL,
 	"3100: Device bus error"},
-	{0x04080100, 0, 1,
+	{0x04080100, 0, IPR_DEFAULT_LOG_LEVEL,
 	"3109: IOA timed out a device command"},
 	{0x04088000, 0, 0,
 	"3120: SCSI bus is not operational"},
-	{0x04088100, 0, 1,
+	{0x04088100, 0, IPR_DEFAULT_LOG_LEVEL,
 	"4100: Hard device bus fabric error"},
-	{0x04118000, 0, 1,
+	{0x04118000, 0, IPR_DEFAULT_LOG_LEVEL,
 	"9000: IOA reserved area data check"},
-	{0x04118100, 0, 1,
+	{0x04118100, 0, IPR_DEFAULT_LOG_LEVEL,
 	"9001: IOA reserved area invalid data pattern"},
-	{0x04118200, 0, 1,
+	{0x04118200, 0, IPR_DEFAULT_LOG_LEVEL,
 	"9002: IOA reserved area LRC error"},
-	{0x04320000, 0, 1,
+	{0x04320000, 0, IPR_DEFAULT_LOG_LEVEL,
 	"102E: Out of alternate sectors for disk storage"},
-	{0x04330000, 1, 1,
+	{0x04330000, 1, IPR_DEFAULT_LOG_LEVEL,
 	"FFF4: Data transfer underlength error"},
-	{0x04338000, 1, 1,
+	{0x04338000, 1, IPR_DEFAULT_LOG_LEVEL,
 	"FFF4: Data transfer overlength error"},
-	{0x043E0100, 0, 1,
+	{0x043E0100, 0, IPR_DEFAULT_LOG_LEVEL,
 	"3400: Logical unit failure"},
-	{0x04408500, 0, 1,
+	{0x04408500, 0, IPR_DEFAULT_LOG_LEVEL,
 	"FFF4: Device microcode is corrupt"},
-	{0x04418000, 1, 1,
+	{0x04418000, 1, IPR_DEFAULT_LOG_LEVEL,
 	"8150: PCI bus error"},
 	{0x04430000, 1, 0,
 	"Unsupported device bus message received"},
-	{0x04440000, 1, 1,
+	{0x04440000, 1, IPR_DEFAULT_LOG_LEVEL,
 	"FFF4: Disk device problem"},
-	{0x04448200, 1, 1,
+	{0x04448200, 1, IPR_DEFAULT_LOG_LEVEL,
 	"8150: Permanent IOA failure"},
-	{0x04448300, 0, 1,
+	{0x04448300, 0, IPR_DEFAULT_LOG_LEVEL,
 	"3010: Disk device returned wrong response to IOA"},
-	{0x04448400, 0, 1,
+	{0x04448400, 0, IPR_DEFAULT_LOG_LEVEL,
 	"8151: IOA microcode error"},
 	{0x04448500, 0, 0,
 	"Device bus status error"},
-	{0x04448600, 0, 1,
+	{0x04448600, 0, IPR_DEFAULT_LOG_LEVEL,
 	"8157: IOA error requiring IOA reset to recover"},
 	{0x04448700, 0, 0,
 	"ATA device status error"},
 	{0x04490000, 0, 0,
 	"Message reject received from the device"},
-	{0x04449200, 0, 1,
+	{0x04449200, 0, IPR_DEFAULT_LOG_LEVEL,
 	"8008: A permanent cache battery pack failure occurred"},
-	{0x0444A000, 0, 1,
+	{0x0444A000, 0, IPR_DEFAULT_LOG_LEVEL,
 	"9090: Disk unit has been modified after the last known status"},
-	{0x0444A200, 0, 1,
+	{0x0444A200, 0, IPR_DEFAULT_LOG_LEVEL,
 	"9081: IOA detected device error"},
-	{0x0444A300, 0, 1,
+	{0x0444A300, 0, IPR_DEFAULT_LOG_LEVEL,
 	"9082: IOA detected device error"},
-	{0x044A0000, 1, 1,
+	{0x044A0000, 1, IPR_DEFAULT_LOG_LEVEL,
 	"3110: Device bus error, message or command phase"},
-	{0x044A8000, 1, 1,
+	{0x044A8000, 1, IPR_DEFAULT_LOG_LEVEL,
 	"3110: SAS Command / Task Management Function failed"},
-	{0x04670400, 0, 1,
+	{0x04670400, 0, IPR_DEFAULT_LOG_LEVEL,
 	"9091: Incorrect hardware configuration change has been detected"},
-	{0x04678000, 0, 1,
+	{0x04678000, 0, IPR_DEFAULT_LOG_LEVEL,
 	"9073: Invalid multi-adapter configuration"},
-	{0x04678100, 0, 1,
+	{0x04678100, 0, IPR_DEFAULT_LOG_LEVEL,
 	"4010: Incorrect connection between cascaded expanders"},
-	{0x04678200, 0, 1,
+	{0x04678200, 0, IPR_DEFAULT_LOG_LEVEL,
 	"4020: Connections exceed IOA design limits"},
-	{0x04678300, 0, 1,
+	{0x04678300, 0, IPR_DEFAULT_LOG_LEVEL,
 	"4030: Incorrect multipath connection"},
-	{0x04679000, 0, 1,
+	{0x04679000, 0, IPR_DEFAULT_LOG_LEVEL,
 	"4110: Unsupported enclosure function"},
-	{0x046E0000, 0, 1,
+	{0x046E0000, 0, IPR_DEFAULT_LOG_LEVEL,
 	"FFF4: Command to logical unit failed"},
 	{0x05240000, 1, 0,
 	"Illegal request, invalid request type or request packet"},
@@ -313,101 +310,103 @@
 	"Illegal request, command sequence error"},
 	{0x052C8000, 1, 0,
 	"Illegal request, dual adapter support not enabled"},
-	{0x06040500, 0, 1,
+	{0x06040500, 0, IPR_DEFAULT_LOG_LEVEL,
 	"9031: Array protection temporarily suspended, protection resuming"},
-	{0x06040600, 0, 1,
+	{0x06040600, 0, IPR_DEFAULT_LOG_LEVEL,
 	"9040: Array protection temporarily suspended, protection resuming"},
-	{0x06288000, 0, 1,
+	{0x06288000, 0, IPR_DEFAULT_LOG_LEVEL,
 	"3140: Device bus not ready to ready transition"},
-	{0x06290000, 0, 1,
+	{0x06290000, 0, IPR_DEFAULT_LOG_LEVEL,
 	"FFFB: SCSI bus was reset"},
 	{0x06290500, 0, 0,
 	"FFFE: SCSI bus transition to single ended"},
 	{0x06290600, 0, 0,
 	"FFFE: SCSI bus transition to LVD"},
-	{0x06298000, 0, 1,
+	{0x06298000, 0, IPR_DEFAULT_LOG_LEVEL,
 	"FFFB: SCSI bus was reset by another initiator"},
-	{0x063F0300, 0, 1,
+	{0x063F0300, 0, IPR_DEFAULT_LOG_LEVEL,
 	"3029: A device replacement has occurred"},
-	{0x064C8000, 0, 1,
+	{0x064C8000, 0, IPR_DEFAULT_LOG_LEVEL,
 	"9051: IOA cache data exists for a missing or failed device"},
-	{0x064C8100, 0, 1,
+	{0x064C8100, 0, IPR_DEFAULT_LOG_LEVEL,
 	"9055: Auxiliary cache IOA contains cache data needed by the primary IOA"},
-	{0x06670100, 0, 1,
+	{0x06670100, 0, IPR_DEFAULT_LOG_LEVEL,
 	"9025: Disk unit is not supported at its physical location"},
-	{0x06670600, 0, 1,
+	{0x06670600, 0, IPR_DEFAULT_LOG_LEVEL,
 	"3020: IOA detected a SCSI bus configuration error"},
-	{0x06678000, 0, 1,
+	{0x06678000, 0, IPR_DEFAULT_LOG_LEVEL,
 	"3150: SCSI bus configuration error"},
-	{0x06678100, 0, 1,
+	{0x06678100, 0, IPR_DEFAULT_LOG_LEVEL,
 	"9074: Asymmetric advanced function disk configuration"},
-	{0x06678300, 0, 1,
+	{0x06678300, 0, IPR_DEFAULT_LOG_LEVEL,
 	"4040: Incomplete multipath connection between IOA and enclosure"},
-	{0x06678400, 0, 1,
+	{0x06678400, 0, IPR_DEFAULT_LOG_LEVEL,
 	"4041: Incomplete multipath connection between enclosure and device"},
-	{0x06678500, 0, 1,
+	{0x06678500, 0, IPR_DEFAULT_LOG_LEVEL,
 	"9075: Incomplete multipath connection between IOA and remote IOA"},
-	{0x06678600, 0, 1,
+	{0x06678600, 0, IPR_DEFAULT_LOG_LEVEL,
 	"9076: Configuration error, missing remote IOA"},
-	{0x06679100, 0, 1,
+	{0x06679100, 0, IPR_DEFAULT_LOG_LEVEL,
 	"4050: Enclosure does not support a required multipath function"},
-	{0x06690200, 0, 1,
+	{0x06690200, 0, IPR_DEFAULT_LOG_LEVEL,
 	"9041: Array protection temporarily suspended"},
-	{0x06698200, 0, 1,
+	{0x06698200, 0, IPR_DEFAULT_LOG_LEVEL,
 	"9042: Corrupt array parity detected on specified device"},
-	{0x066B0200, 0, 1,
+	{0x066B0200, 0, IPR_DEFAULT_LOG_LEVEL,
 	"9030: Array no longer protected due to missing or failed disk unit"},
-	{0x066B8000, 0, 1,
+	{0x066B8000, 0, IPR_DEFAULT_LOG_LEVEL,
 	"9071: Link operational transition"},
-	{0x066B8100, 0, 1,
+	{0x066B8100, 0, IPR_DEFAULT_LOG_LEVEL,
 	"9072: Link not operational transition"},
-	{0x066B8200, 0, 1,
+	{0x066B8200, 0, IPR_DEFAULT_LOG_LEVEL,
 	"9032: Array exposed but still protected"},
-	{0x066B9100, 0, 1,
+	{0x066B8300, 0, IPR_DEFAULT_LOG_LEVEL + 1,
+	"70DD: Device forced failed by disrupt device command"},
+	{0x066B9100, 0, IPR_DEFAULT_LOG_LEVEL,
 	"4061: Multipath redundancy level got better"},
-	{0x066B9200, 0, 1,
+	{0x066B9200, 0, IPR_DEFAULT_LOG_LEVEL,
 	"4060: Multipath redundancy level got worse"},
 	{0x07270000, 0, 0,
 	"Failure due to other device"},
-	{0x07278000, 0, 1,
+	{0x07278000, 0, IPR_DEFAULT_LOG_LEVEL,
 	"9008: IOA does not support functions expected by devices"},
-	{0x07278100, 0, 1,
+	{0x07278100, 0, IPR_DEFAULT_LOG_LEVEL,
 	"9010: Cache data associated with attached devices cannot be found"},
-	{0x07278200, 0, 1,
+	{0x07278200, 0, IPR_DEFAULT_LOG_LEVEL,
 	"9011: Cache data belongs to devices other than those attached"},
-	{0x07278400, 0, 1,
+	{0x07278400, 0, IPR_DEFAULT_LOG_LEVEL,
 	"9020: Array missing 2 or more devices with only 1 device present"},
-	{0x07278500, 0, 1,
+	{0x07278500, 0, IPR_DEFAULT_LOG_LEVEL,
 	"9021: Array missing 2 or more devices with 2 or more devices present"},
-	{0x07278600, 0, 1,
+	{0x07278600, 0, IPR_DEFAULT_LOG_LEVEL,
 	"9022: Exposed array is missing a required device"},
-	{0x07278700, 0, 1,
+	{0x07278700, 0, IPR_DEFAULT_LOG_LEVEL,
 	"9023: Array member(s) not at required physical locations"},
-	{0x07278800, 0, 1,
+	{0x07278800, 0, IPR_DEFAULT_LOG_LEVEL,
 	"9024: Array not functional due to present hardware configuration"},
-	{0x07278900, 0, 1,
+	{0x07278900, 0, IPR_DEFAULT_LOG_LEVEL,
 	"9026: Array not functional due to present hardware configuration"},
-	{0x07278A00, 0, 1,
+	{0x07278A00, 0, IPR_DEFAULT_LOG_LEVEL,
 	"9027: Array is missing a device and parity is out of sync"},
-	{0x07278B00, 0, 1,
+	{0x07278B00, 0, IPR_DEFAULT_LOG_LEVEL,
 	"9028: Maximum number of arrays already exist"},
-	{0x07278C00, 0, 1,
+	{0x07278C00, 0, IPR_DEFAULT_LOG_LEVEL,
 	"9050: Required cache data cannot be located for a disk unit"},
-	{0x07278D00, 0, 1,
+	{0x07278D00, 0, IPR_DEFAULT_LOG_LEVEL,
 	"9052: Cache data exists for a device that has been modified"},
-	{0x07278F00, 0, 1,
+	{0x07278F00, 0, IPR_DEFAULT_LOG_LEVEL,
 	"9054: IOA resources not available due to previous problems"},
-	{0x07279100, 0, 1,
+	{0x07279100, 0, IPR_DEFAULT_LOG_LEVEL,
 	"9092: Disk unit requires initialization before use"},
-	{0x07279200, 0, 1,
+	{0x07279200, 0, IPR_DEFAULT_LOG_LEVEL,
 	"9029: Incorrect hardware configuration change has been detected"},
-	{0x07279600, 0, 1,
+	{0x07279600, 0, IPR_DEFAULT_LOG_LEVEL,
 	"9060: One or more disk pairs are missing from an array"},
-	{0x07279700, 0, 1,
+	{0x07279700, 0, IPR_DEFAULT_LOG_LEVEL,
 	"9061: One or more disks are missing from an array"},
-	{0x07279800, 0, 1,
+	{0x07279800, 0, IPR_DEFAULT_LOG_LEVEL,
 	"9062: One or more disks are missing from an array"},
-	{0x07279900, 0, 1,
+	{0x07279900, 0, IPR_DEFAULT_LOG_LEVEL,
 	"9063: Maximum number of functional arrays has been exceeded"},
 	{0x0B260000, 0, 0,
 	"Aborted command, invalid descriptor"},
@@ -481,12 +480,16 @@
 {
 	struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb;
 	struct ipr_ioasa *ioasa = &ipr_cmd->ioasa;
+	dma_addr_t dma_addr = be32_to_cpu(ioarcb->ioarcb_host_pci_addr);
 
 	memset(&ioarcb->cmd_pkt, 0, sizeof(struct ipr_cmd_pkt));
 	ioarcb->write_data_transfer_length = 0;
 	ioarcb->read_data_transfer_length = 0;
 	ioarcb->write_ioadl_len = 0;
 	ioarcb->read_ioadl_len = 0;
+	ioarcb->write_ioadl_addr =
+		cpu_to_be32(dma_addr + offsetof(struct ipr_cmnd, ioadl));
+	ioarcb->read_ioadl_addr = ioarcb->write_ioadl_addr;
 	ioasa->ioasc = 0;
 	ioasa->residual_data_len = 0;
 	ioasa->u.gata.status = 0;
@@ -1610,7 +1613,7 @@
 	/* Set indication we have logged an error */
 	ioa_cfg->errors_logged++;
 
-	if (ioa_cfg->log_level < IPR_DEFAULT_LOG_LEVEL)
+	if (ioa_cfg->log_level < ipr_error_table[error_index].log_hcam)
 		return;
 	if (be32_to_cpu(hostrcb->hcam.length) > sizeof(hostrcb->hcam.u.raw))
 		hostrcb->hcam.length = cpu_to_be32(sizeof(hostrcb->hcam.u.raw));
@@ -3850,6 +3853,8 @@
 		if (ipr_cmd->ioarcb.res_handle == res->cfgte.res_handle) {
 			if (ipr_cmd->scsi_cmd)
 				ipr_cmd->done = ipr_scsi_eh_done;
+			if (ipr_cmd->qc)
+				ipr_cmd->done = ipr_sata_eh_done;
 			if (ipr_cmd->qc && !(ipr_cmd->qc->flags & ATA_QCFLAG_FAILED)) {
 				ipr_cmd->qc->err_mask |= AC_ERR_TIMEOUT;
 				ipr_cmd->qc->flags |= ATA_QCFLAG_FAILED;
@@ -4230,6 +4235,14 @@
 
 		sglist = scsi_cmd->request_buffer;
 
+		if (ipr_cmd->dma_use_sg <= ARRAY_SIZE(ioarcb->add_data.u.ioadl)) {
+			ioadl = ioarcb->add_data.u.ioadl;
+			ioarcb->write_ioadl_addr =
+				cpu_to_be32(be32_to_cpu(ioarcb->ioarcb_host_pci_addr) +
+					    offsetof(struct ipr_ioarcb, add_data));
+			ioarcb->read_ioadl_addr = ioarcb->write_ioadl_addr;
+		}
+
 		for (i = 0; i < ipr_cmd->dma_use_sg; i++) {
 			ioadl[i].flags_and_data_len =
 				cpu_to_be32(ioadl_flags | sg_dma_len(&sglist[i]));
@@ -4260,6 +4273,11 @@
 						     scsi_cmd->sc_data_direction);
 
 		if (likely(!pci_dma_mapping_error(ipr_cmd->dma_handle))) {
+			ioadl = ioarcb->add_data.u.ioadl;
+			ioarcb->write_ioadl_addr =
+				cpu_to_be32(be32_to_cpu(ioarcb->ioarcb_host_pci_addr) +
+					    offsetof(struct ipr_ioarcb, add_data));
+			ioarcb->read_ioadl_addr = ioarcb->write_ioadl_addr;
 			ipr_cmd->dma_use_sg = 1;
 			ioadl[0].flags_and_data_len =
 				cpu_to_be32(ioadl_flags | length | IPR_IOADL_FLAGS_LAST);
@@ -4346,11 +4364,9 @@
  **/
 static void ipr_reinit_ipr_cmnd_for_erp(struct ipr_cmnd *ipr_cmd)
 {
-	struct ipr_ioarcb *ioarcb;
-	struct ipr_ioasa *ioasa;
-
-	ioarcb = &ipr_cmd->ioarcb;
-	ioasa = &ipr_cmd->ioasa;
+	struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb;
+	struct ipr_ioasa *ioasa = &ipr_cmd->ioasa;
+	dma_addr_t dma_addr = be32_to_cpu(ioarcb->ioarcb_host_pci_addr);
 
 	memset(&ioarcb->cmd_pkt, 0, sizeof(struct ipr_cmd_pkt));
 	ioarcb->write_data_transfer_length = 0;
@@ -4359,6 +4375,9 @@
 	ioarcb->read_ioadl_len = 0;
 	ioasa->ioasc = 0;
 	ioasa->residual_data_len = 0;
+	ioarcb->write_ioadl_addr =
+		cpu_to_be32(dma_addr + offsetof(struct ipr_cmnd, ioadl));
+	ioarcb->read_ioadl_addr = ioarcb->write_ioadl_addr;
 }
 
 /**
@@ -4457,12 +4476,13 @@
 {
 	int i;
 	u16 data_len;
-	u32 ioasc;
+	u32 ioasc, fd_ioasc;
 	struct ipr_ioasa *ioasa = &ipr_cmd->ioasa;
 	__be32 *ioasa_data = (__be32 *)ioasa;
 	int error_index;
 
 	ioasc = be32_to_cpu(ioasa->ioasc) & IPR_IOASC_IOASC_MASK;
+	fd_ioasc = be32_to_cpu(ioasa->fd_ioasc) & IPR_IOASC_IOASC_MASK;
 
 	if (0 == ioasc)
 		return;
@@ -4470,13 +4490,19 @@
 	if (ioa_cfg->log_level < IPR_DEFAULT_LOG_LEVEL)
 		return;
 
-	error_index = ipr_get_error(ioasc);
+	if (ioasc == IPR_IOASC_BUS_WAS_RESET && fd_ioasc)
+		error_index = ipr_get_error(fd_ioasc);
+	else
+		error_index = ipr_get_error(ioasc);
 
 	if (ioa_cfg->log_level < IPR_MAX_LOG_LEVEL) {
 		/* Don't log an error if the IOA already logged one */
 		if (ioasa->ilid != 0)
 			return;
 
+		if (!ipr_is_gscsi(res))
+			return;
+
 		if (ipr_error_table[error_index].log_ioasa == 0)
 			return;
 	}
@@ -4636,11 +4662,11 @@
 		return;
 	}
 
-	if (ipr_is_gscsi(res))
-		ipr_dump_ioasa(ioa_cfg, ipr_cmd, res);
-	else
+	if (!ipr_is_gscsi(res))
 		ipr_gen_sense(ipr_cmd);
 
+	ipr_dump_ioasa(ioa_cfg, ipr_cmd, res);
+
 	switch (ioasc & IPR_IOASC_IOASC_MASK) {
 	case IPR_IOASC_ABORTED_CMD_TERM_BY_HOST:
 		if (ipr_is_naca_model(res))
@@ -5121,7 +5147,7 @@
 	struct ipr_ioarcb_ata_regs *regs;
 
 	if (unlikely(!ioa_cfg->allow_cmds || ioa_cfg->ioa_is_dead))
-		return -EIO;
+		return AC_ERR_SYSTEM;
 
 	ipr_cmd = ipr_get_free_ipr_cmnd(ioa_cfg);
 	ioarcb = &ipr_cmd->ioarcb;
@@ -5166,7 +5192,7 @@
 
 	default:
 		WARN_ON(1);
-		return -1;
+		return AC_ERR_INVALID;
 	}
 
 	mb();
@@ -6188,7 +6214,7 @@
 	dev_info(&ioa_cfg->pdev->dev, "Initializing IOA.\n");
 
 	ipr_cmd->timer.data = (unsigned long) ipr_cmd;
-	ipr_cmd->timer.expires = jiffies + (ipr_transop_timeout * HZ);
+	ipr_cmd->timer.expires = jiffies + (ioa_cfg->transop_timeout * HZ);
 	ipr_cmd->timer.function = (void (*)(unsigned long))ipr_oper_timeout;
 	ipr_cmd->done = ipr_reset_ioa_job;
 	add_timer(&ipr_cmd->timer);
@@ -6385,6 +6411,7 @@
 	rc = pci_write_config_byte(ioa_cfg->pdev, PCI_BIST, PCI_BIST_START);
 
 	if (rc != PCIBIOS_SUCCESSFUL) {
+		pci_unblock_user_cfg_access(ipr_cmd->ioa_cfg->pdev);
 		ipr_cmd->ioasa.ioasc = cpu_to_be32(IPR_IOASC_PCI_ACCESS_ERROR);
 		rc = IPR_RC_JOB_CONTINUE;
 	} else {
@@ -7117,8 +7144,6 @@
 	ioa_cfg->pdev = pdev;
 	ioa_cfg->log_level = ipr_log_level;
 	ioa_cfg->doorbell = IPR_DOORBELL;
-	if (!ipr_auto_create)
-		ioa_cfg->doorbell |= IPR_RUNTIME_RESET;
 	sprintf(ioa_cfg->eye_catcher, IPR_EYECATCHER);
 	sprintf(ioa_cfg->trace_start, IPR_TRACE_START_LABEL);
 	sprintf(ioa_cfg->ipr_free_label, IPR_FREEQ_LABEL);
@@ -7233,6 +7258,13 @@
 		goto out_scsi_host_put;
 	}
 
+	if (ipr_transop_timeout)
+		ioa_cfg->transop_timeout = ipr_transop_timeout;
+	else if (dev_id->driver_data & IPR_USE_LONG_TRANSOP_TIMEOUT)
+		ioa_cfg->transop_timeout = IPR_LONG_OPERATIONAL_TIMEOUT;
+	else
+		ioa_cfg->transop_timeout = IPR_OPERATIONAL_TIMEOUT;
+
 	ipr_regs_pci = pci_resource_start(pdev, 0);
 
 	rc = pci_request_regions(pdev, IPR_NAME);
@@ -7540,29 +7572,45 @@
 	{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CITRINE,
 		PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_571A, 0, 0, 0 },
 	{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CITRINE,
-		PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_575B, 0, 0, 0 },
+		PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_575B, 0, 0,
+		IPR_USE_LONG_TRANSOP_TIMEOUT },
 	{ PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_OBSIDIAN,
 	      PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_572A, 0, 0, 0 },
 	{ PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_OBSIDIAN,
 	      PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_572B, 0, 0, 0 },
 	{ PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_OBSIDIAN,
-	      PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_575C, 0, 0, 0 },
+	      PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_575C, 0, 0,
+	      IPR_USE_LONG_TRANSOP_TIMEOUT },
 	{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN,
 	      PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_572A, 0, 0, 0 },
 	{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN,
 	      PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_572B, 0, 0, 0 },
 	{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN,
-	      PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_575C, 0, 0, 0 },
+	      PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_575C, 0, 0,
+	      IPR_USE_LONG_TRANSOP_TIMEOUT },
 	{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN_E,
-	      PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_57B7, 0, 0, 0 },
+	      PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_574E, 0, 0, 0 },
+	{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN_E,
+	      PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_575D, 0, 0,
+	      IPR_USE_LONG_TRANSOP_TIMEOUT },
+	{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN_E,
+	      PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_57B3, 0, 0, 0 },
+	{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN_E,
+	      PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_57B7, 0, 0,
+	      IPR_USE_LONG_TRANSOP_TIMEOUT },
 	{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_SNIPE,
 		PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_2780, 0, 0, 0 },
 	{ PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_SCAMP,
 		PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_571E, 0, 0, 0 },
 	{ PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_SCAMP,
-		PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_571F, 0, 0, 0 },
+		PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_571F, 0, 0,
+		IPR_USE_LONG_TRANSOP_TIMEOUT },
 	{ PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_SCAMP,
-		PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_572F, 0, 0, 0 },
+		PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_572F, 0, 0,
+		IPR_USE_LONG_TRANSOP_TIMEOUT },
+	{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_SCAMP_E,
+		PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_574D, 0, 0,
+		IPR_USE_LONG_TRANSOP_TIMEOUT },
 	{ }
 };
 MODULE_DEVICE_TABLE(pci, ipr_pci_table);
diff --git a/drivers/scsi/ipr.h b/drivers/scsi/ipr.h
index 88f285d..bc53d7c 100644
--- a/drivers/scsi/ipr.h
+++ b/drivers/scsi/ipr.h
@@ -37,8 +37,8 @@
 /*
  * Literals
  */
-#define IPR_DRIVER_VERSION "2.3.1"
-#define IPR_DRIVER_DATE "(January 23, 2007)"
+#define IPR_DRIVER_VERSION "2.3.2"
+#define IPR_DRIVER_DATE "(March 23, 2007)"
 
 /*
  * IPR_MAX_CMD_PER_LUN: This defines the maximum number of outstanding
@@ -55,6 +55,7 @@
 #define IPR_NUM_BASE_CMD_BLKS				100
 
 #define PCI_DEVICE_ID_IBM_OBSIDIAN_E	0x0339
+#define PCI_DEVICE_ID_IBM_SCAMP_E		0x034A
 
 #define IPR_SUBS_DEV_ID_2780	0x0264
 #define IPR_SUBS_DEV_ID_5702	0x0266
@@ -69,8 +70,12 @@
 #define IPR_SUBS_DEV_ID_572A	0x02C1
 #define IPR_SUBS_DEV_ID_572B	0x02C2
 #define IPR_SUBS_DEV_ID_572F	0x02C3
+#define IPR_SUBS_DEV_ID_574D	0x030B
+#define IPR_SUBS_DEV_ID_574E	0x030A
 #define IPR_SUBS_DEV_ID_575B	0x030D
 #define IPR_SUBS_DEV_ID_575C	0x0338
+#define IPR_SUBS_DEV_ID_575D	0x033E
+#define IPR_SUBS_DEV_ID_57B3	0x033A
 #define IPR_SUBS_DEV_ID_57B7	0x0360
 #define IPR_SUBS_DEV_ID_57B8	0x02C2
 
@@ -104,6 +109,9 @@
 #define IPR_IOASC_IOA_WAS_RESET			0x10000001
 #define IPR_IOASC_PCI_ACCESS_ERROR			0x10000002
 
+/* Driver data flags */
+#define IPR_USE_LONG_TRANSOP_TIMEOUT		0x00000001
+
 #define IPR_DEFAULT_MAX_ERROR_DUMP			984
 #define IPR_NUM_LOG_HCAMS				2
 #define IPR_NUM_CFG_CHG_HCAMS				2
@@ -179,6 +187,7 @@
 #define IPR_SET_SUP_DEVICE_TIMEOUT		(2 * 60 * HZ)
 #define IPR_REQUEST_SENSE_TIMEOUT		(10 * HZ)
 #define IPR_OPERATIONAL_TIMEOUT		(5 * 60)
+#define IPR_LONG_OPERATIONAL_TIMEOUT	(12 * 60)
 #define IPR_WAIT_FOR_RESET_TIMEOUT		(2 * HZ)
 #define IPR_CHECK_FOR_RESET_TIMEOUT		(HZ / 10)
 #define IPR_WAIT_FOR_BIST_TIMEOUT		(2 * HZ)
@@ -413,9 +422,25 @@
 	u8 ctl;
 }__attribute__ ((packed, aligned(4)));
 
+struct ipr_ioadl_desc {
+	__be32 flags_and_data_len;
+#define IPR_IOADL_FLAGS_MASK		0xff000000
+#define IPR_IOADL_GET_FLAGS(x) (be32_to_cpu(x) & IPR_IOADL_FLAGS_MASK)
+#define IPR_IOADL_DATA_LEN_MASK		0x00ffffff
+#define IPR_IOADL_GET_DATA_LEN(x) (be32_to_cpu(x) & IPR_IOADL_DATA_LEN_MASK)
+#define IPR_IOADL_FLAGS_READ		0x48000000
+#define IPR_IOADL_FLAGS_READ_LAST	0x49000000
+#define IPR_IOADL_FLAGS_WRITE		0x68000000
+#define IPR_IOADL_FLAGS_WRITE_LAST	0x69000000
+#define IPR_IOADL_FLAGS_LAST		0x01000000
+
+	__be32 address;
+}__attribute__((packed, aligned (8)));
+
 struct ipr_ioarcb_add_data {
 	union {
 		struct ipr_ioarcb_ata_regs regs;
+		struct ipr_ioadl_desc ioadl[5];
 		__be32 add_cmd_parms[10];
 	}u;
 }__attribute__ ((packed, aligned(4)));
@@ -447,21 +472,6 @@
 	struct ipr_ioarcb_add_data add_data;
 }__attribute__((packed, aligned (4)));
 
-struct ipr_ioadl_desc {
-	__be32 flags_and_data_len;
-#define IPR_IOADL_FLAGS_MASK		0xff000000
-#define IPR_IOADL_GET_FLAGS(x) (be32_to_cpu(x) & IPR_IOADL_FLAGS_MASK)
-#define IPR_IOADL_DATA_LEN_MASK		0x00ffffff
-#define IPR_IOADL_GET_DATA_LEN(x) (be32_to_cpu(x) & IPR_IOADL_DATA_LEN_MASK)
-#define IPR_IOADL_FLAGS_READ		0x48000000
-#define IPR_IOADL_FLAGS_READ_LAST	0x49000000
-#define IPR_IOADL_FLAGS_WRITE		0x68000000
-#define IPR_IOADL_FLAGS_WRITE_LAST	0x69000000
-#define IPR_IOADL_FLAGS_LAST		0x01000000
-
-	__be32 address;
-}__attribute__((packed, aligned (8)));
-
 struct ipr_ioasa_vset {
 	__be32 failing_lba_hi;
 	__be32 failing_lba_lo;
@@ -1119,6 +1129,7 @@
 
 	struct ipr_bus_attributes bus_attr[IPR_MAX_NUM_BUSES];
 
+	unsigned int transop_timeout;
 	const struct ipr_chip_cfg_t *chip_cfg;
 
 	void __iomem *hdw_dma_regs;	/* iomapped PCI memory space */
diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c
index 8f55e14..c9a3abf 100644
--- a/drivers/scsi/iscsi_tcp.c
+++ b/drivers/scsi/iscsi_tcp.c
@@ -527,12 +527,12 @@
 		 * than 8K, but there are no targets that currently do this.
 		 * For now we fail until we find a vendor that needs it
 		 */
-		if (DEFAULT_MAX_RECV_DATA_SEGMENT_LENGTH <
+		if (ISCSI_DEF_MAX_RECV_SEG_LEN <
 		    tcp_conn->in.datalen) {
 			printk(KERN_ERR "iscsi_tcp: received buffer of len %u "
 			      "but conn buffer is only %u (opcode %0x)\n",
 			      tcp_conn->in.datalen,
-			      DEFAULT_MAX_RECV_DATA_SEGMENT_LENGTH, opcode);
+			      ISCSI_DEF_MAX_RECV_SEG_LEN, opcode);
 			rc = ISCSI_ERR_PROTO;
 			break;
 		}
@@ -1762,7 +1762,7 @@
 	 * due to strange issues with iser these are not set
 	 * in iscsi_conn_setup
 	 */
-	conn->max_recv_dlength = DEFAULT_MAX_RECV_DATA_SEGMENT_LENGTH;
+	conn->max_recv_dlength = ISCSI_DEF_MAX_RECV_SEG_LEN;
 
 	tcp_conn = kzalloc(sizeof(*tcp_conn), GFP_KERNEL);
 	if (!tcp_conn)
@@ -1777,14 +1777,24 @@
 	tcp_conn->tx_hash.tfm = crypto_alloc_hash("crc32c", 0,
 						  CRYPTO_ALG_ASYNC);
 	tcp_conn->tx_hash.flags = 0;
-	if (IS_ERR(tcp_conn->tx_hash.tfm))
+	if (IS_ERR(tcp_conn->tx_hash.tfm)) {
+		printk(KERN_ERR "Could not create connection due to crc32c "
+		       "loading error %ld. Make sure the crc32c module is "
+		       "built as a module or into the kernel\n",
+			PTR_ERR(tcp_conn->tx_hash.tfm));
 		goto free_tcp_conn;
+	}
 
 	tcp_conn->rx_hash.tfm = crypto_alloc_hash("crc32c", 0,
 						  CRYPTO_ALG_ASYNC);
 	tcp_conn->rx_hash.flags = 0;
-	if (IS_ERR(tcp_conn->rx_hash.tfm))
+	if (IS_ERR(tcp_conn->rx_hash.tfm)) {
+		printk(KERN_ERR "Could not create connection due to crc32c "
+		       "loading error %ld. Make sure the crc32c module is "
+		       "built as a module or into the kernel\n",
+			PTR_ERR(tcp_conn->rx_hash.tfm));
 		goto free_tx_tfm;
+	}
 
 	return cls_conn;
 
@@ -2138,6 +2148,7 @@
 	.change_queue_depth	= iscsi_change_queue_depth,
 	.can_queue		= ISCSI_XMIT_CMDS_MAX - 1,
 	.sg_tablesize		= ISCSI_SG_TABLESIZE,
+	.max_sectors		= 0xFFFF,
 	.cmd_per_lun		= ISCSI_DEF_CMD_PER_LUN,
 	.eh_abort_handler       = iscsi_eh_abort,
 	.eh_host_reset_handler	= iscsi_eh_host_reset,
diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c
index 7c75771..3f5b9b4 100644
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -25,6 +25,7 @@
 #include <linux/mutex.h>
 #include <linux/kfifo.h>
 #include <linux/delay.h>
+#include <asm/unaligned.h>
 #include <net/tcp.h>
 #include <scsi/scsi_cmnd.h>
 #include <scsi/scsi_device.h>
@@ -269,14 +270,14 @@
 			goto out;
 		}
 
-		senselen = be16_to_cpu(*(__be16 *)data);
+		senselen = be16_to_cpu(get_unaligned((__be16 *) data));
 		if (datalen < senselen)
 			goto invalid_datalen;
 
 		memcpy(sc->sense_buffer, data + 2,
 		       min_t(uint16_t, senselen, SCSI_SENSE_BUFFERSIZE));
 		debug_scsi("copied %d bytes of sense\n",
-			   min(senselen, SCSI_SENSE_BUFFERSIZE));
+			   min_t(uint16_t, senselen, SCSI_SENSE_BUFFERSIZE));
 	}
 
 	if (sc->sc_data_direction == DMA_TO_DEVICE)
@@ -577,7 +578,7 @@
 }
 EXPORT_SYMBOL_GPL(iscsi_conn_failure);
 
-static int iscsi_xmit_imm_task(struct iscsi_conn *conn)
+static int iscsi_xmit_mtask(struct iscsi_conn *conn)
 {
 	struct iscsi_hdr *hdr = conn->mtask->hdr;
 	int rc, was_logout = 0;
@@ -591,6 +592,9 @@
 	if (rc)
 		return rc;
 
+	/* done with this in-progress mtask */
+	conn->mtask = NULL;
+
 	if (was_logout) {
 		set_bit(ISCSI_SUSPEND_BIT, &conn->suspend_tx);
 		return -ENODATA;
@@ -643,11 +647,9 @@
 		conn->ctask = NULL;
 	}
 	if (conn->mtask) {
-		rc = iscsi_xmit_imm_task(conn);
+		rc = iscsi_xmit_mtask(conn);
 	        if (rc)
 		        goto again;
-		/* done with this in-progress mtask */
-		conn->mtask = NULL;
 	}
 
 	/* process immediate first */
@@ -658,12 +660,10 @@
 			list_add_tail(&conn->mtask->running,
 				      &conn->mgmt_run_list);
 			spin_unlock_bh(&conn->session->lock);
-			rc = iscsi_xmit_imm_task(conn);
+			rc = iscsi_xmit_mtask(conn);
 		        if (rc)
 			        goto again;
 	        }
-		/* done with this mtask */
-		conn->mtask = NULL;
 	}
 
 	/* process command queue */
@@ -701,12 +701,10 @@
 			list_add_tail(&conn->mtask->running,
 				      &conn->mgmt_run_list);
 			spin_unlock_bh(&conn->session->lock);
-		        rc = tt->xmit_mgmt_task(conn, conn->mtask);
-			if (rc)
+			rc = iscsi_xmit_mtask(conn);
+		        if (rc)
 			        goto again;
 	        }
-		/* done with this mtask */
-		conn->mtask = NULL;
 	}
 
 	return -ENODATA;
@@ -1523,7 +1521,7 @@
 	}
 	spin_unlock_bh(&session->lock);
 
-	data = kmalloc(DEFAULT_MAX_RECV_DATA_SEGMENT_LENGTH, GFP_KERNEL);
+	data = kmalloc(ISCSI_DEF_MAX_RECV_SEG_LEN, GFP_KERNEL);
 	if (!data)
 		goto login_mtask_data_alloc_fail;
 	conn->login_mtask->data = conn->data = data;
@@ -1597,6 +1595,9 @@
 		wake_up(&conn->ehwait);
 	}
 
+	/* flush queued up work because we free the connection below */
+	scsi_flush_work(session->host);
+
 	spin_lock_bh(&session->lock);
 	kfree(conn->data);
 	kfree(conn->persistent_address);
diff --git a/drivers/scsi/libsrp.c b/drivers/scsi/libsrp.c
index 6335830..5631c19 100644
--- a/drivers/scsi/libsrp.c
+++ b/drivers/scsi/libsrp.c
@@ -224,8 +224,7 @@
 	struct srp_direct_buf *md = NULL;
 	struct scatterlist dummy, *sg = NULL;
 	dma_addr_t token = 0;
-	long err;
-	unsigned int done = 0;
+	int err = 0;
 	int nmd, nsg = 0, len;
 
 	if (dma_map || ext_desc) {
@@ -257,8 +256,8 @@
 		sg_dma_address(&dummy) = token;
 		err = rdma_io(sc, &dummy, 1, &id->table_desc, 1, DMA_TO_DEVICE,
 			      id->table_desc.len);
-		if (err < 0) {
-			eprintk("Error copying indirect table %ld\n", err);
+		if (err) {
+			eprintk("Error copying indirect table %d\n", err);
 			goto free_mem;
 		}
 	} else {
@@ -271,6 +270,7 @@
 		nsg = dma_map_sg(iue->target->dev, sg, sc->use_sg, DMA_BIDIRECTIONAL);
 		if (!nsg) {
 			eprintk("fail to map %p %d\n", iue, sc->use_sg);
+			err = -EIO;
 			goto free_mem;
 		}
 		len = min(sc->request_bufflen, id->len);
@@ -286,7 +286,7 @@
 	if (token && dma_map)
 		dma_free_coherent(iue->target->dev, id->table_desc.len, md, token);
 
-	return done;
+	return err;
 }
 
 static int data_out_desc_size(struct srp_cmd *cmd)
@@ -351,7 +351,7 @@
 		break;
 	default:
 		eprintk("Unknown format %d %x\n", dir, format);
-		break;
+		err = -EINVAL;
 	}
 
 	return err;
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 057fd7e0..dcf6106 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -671,7 +671,7 @@
 lpfc_parse_vpd(struct lpfc_hba * phba, uint8_t * vpd, int len)
 {
 	uint8_t lenlo, lenhi;
-	uint32_t Length;
+	int Length;
 	int i, j;
 	int finished = 0;
 	int index = 0;
diff --git a/drivers/scsi/osst.c b/drivers/scsi/osst.c
index a967fad..08060fb 100644
--- a/drivers/scsi/osst.c
+++ b/drivers/scsi/osst.c
@@ -87,6 +87,7 @@
 MODULE_DESCRIPTION("OnStream {DI-|FW-|SC-|USB}{30|50} Tape Driver");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS_CHARDEV_MAJOR(OSST_MAJOR);
+MODULE_ALIAS_SCSI_DEVICE(TYPE_TAPE);
 
 module_param(max_dev, int, 0444);
 MODULE_PARM_DESC(max_dev, "Maximum number of OnStream Tape Drives to attach (4)");
diff --git a/drivers/scsi/pci2000.h b/drivers/scsi/pci2000.h
deleted file mode 100644
index 0ebd8ce..0000000
--- a/drivers/scsi/pci2000.h
+++ /dev/null
@@ -1,197 +0,0 @@
-/****************************************************************************
- * Perceptive Solutions, Inc. PCI-2000 device driver for Linux.
- *
- * pci2000.h - Linux Host Driver for PCI-2000 IntelliCache SCSI Adapters
- *
- * Copyright (c) 1997-1999 Perceptive Solutions, Inc.
- * All Rights Reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that redistributions of source
- * code retain the above copyright notice and this comment without
- * modification.
- *
- * Technical updates and product information at:
- *  http://www.psidisk.com
- *
- * Please send questions, comments, bug reports to:
- *  tech@psidisk.com Technical Support
- *
- ****************************************************************************/
-#ifndef _PCI2000_H
-#define _PCI2000_H
-
-#include <linux/types.h>
-
-#ifndef	PSI_EIDE_SCSIOP
-#define	PSI_EIDE_SCSIOP	1
-
-#define	LINUXVERSION(v,p,s)    (((v)<<16) + ((p)<<8) + (s))
-
-/************************************************/
-/*		definition of standard data types		*/
-/************************************************/
-#define	CHAR	char
-#define	UCHAR	unsigned char
-#define	SHORT	short
-#define	USHORT	unsigned short
-#define	BOOL	long
-#define	LONG	long
-#define	ULONG	unsigned long
-#define	VOID	void
-
-typedef	CHAR	*PCHAR;
-typedef	UCHAR	*PUCHAR;
-typedef	SHORT	*PSHORT;
-typedef	USHORT	*PUSHORT;
-typedef	BOOL	*PBOOL;
-typedef	LONG	*PLONG;
-typedef	ULONG	*PULONG;
-typedef	VOID	*PVOID;
-
-
-/************************************************/
-/*		Misc. macros			 				*/
-/************************************************/
-#define ANY2SCSI(up, p)					\
-((UCHAR *)up)[0] = (((ULONG)(p)) >> 8);	\
-((UCHAR *)up)[1] = ((ULONG)(p));
-
-#define SCSI2LONG(up)					\
-( (((long)*(((UCHAR *)up))) << 16)		\
-+ (((long)(((UCHAR *)up)[1])) << 8)		\
-+ ((long)(((UCHAR *)up)[2])) )
-
-#define XANY2SCSI(up, p)				\
-((UCHAR *)up)[0] = ((long)(p)) >> 24;	\
-((UCHAR *)up)[1] = ((long)(p)) >> 16;	\
-((UCHAR *)up)[2] = ((long)(p)) >> 8;	\
-((UCHAR *)up)[3] = ((long)(p));
-
-#define XSCSI2LONG(up)					\
-( (((long)(((UCHAR *)up)[0])) << 24)	\
-+ (((long)(((UCHAR *)up)[1])) << 16)	\
-+ (((long)(((UCHAR *)up)[2])) <<  8)	\
-+ ((long)(((UCHAR *)up)[3])) )
-
-/************************************************/
-/*		SCSI CDB operation codes 				*/
-/************************************************/
-#define SCSIOP_TEST_UNIT_READY		0x00
-#define SCSIOP_REZERO_UNIT			0x01
-#define SCSIOP_REWIND				0x01
-#define SCSIOP_REQUEST_BLOCK_ADDR	0x02
-#define SCSIOP_REQUEST_SENSE		0x03
-#define SCSIOP_FORMAT_UNIT			0x04
-#define SCSIOP_READ_BLOCK_LIMITS	0x05
-#define SCSIOP_REASSIGN_BLOCKS		0x07
-#define SCSIOP_READ6				0x08
-#define SCSIOP_RECEIVE				0x08
-#define SCSIOP_WRITE6				0x0A
-#define SCSIOP_PRINT				0x0A
-#define SCSIOP_SEND					0x0A
-#define SCSIOP_SEEK6				0x0B
-#define SCSIOP_TRACK_SELECT			0x0B
-#define SCSIOP_SLEW_PRINT			0x0B
-#define SCSIOP_SEEK_BLOCK			0x0C
-#define SCSIOP_PARTITION			0x0D
-#define SCSIOP_READ_REVERSE			0x0F
-#define SCSIOP_WRITE_FILEMARKS		0x10
-#define SCSIOP_FLUSH_BUFFER			0x10
-#define SCSIOP_SPACE				0x11
-#define SCSIOP_INQUIRY				0x12
-#define SCSIOP_VERIFY6				0x13
-#define SCSIOP_RECOVER_BUF_DATA		0x14
-#define SCSIOP_MODE_SELECT			0x15
-#define SCSIOP_RESERVE_UNIT			0x16
-#define SCSIOP_RELEASE_UNIT			0x17
-#define SCSIOP_COPY					0x18
-#define SCSIOP_ERASE				0x19
-#define SCSIOP_MODE_SENSE			0x1A
-#define SCSIOP_START_STOP_UNIT		0x1B
-#define SCSIOP_STOP_PRINT			0x1B
-#define SCSIOP_LOAD_UNLOAD			0x1B
-#define SCSIOP_RECEIVE_DIAGNOSTIC	0x1C
-#define SCSIOP_SEND_DIAGNOSTIC		0x1D
-#define SCSIOP_MEDIUM_REMOVAL		0x1E
-#define SCSIOP_READ_CAPACITY		0x25
-#define SCSIOP_READ					0x28
-#define SCSIOP_WRITE				0x2A
-#define SCSIOP_SEEK					0x2B
-#define SCSIOP_LOCATE				0x2B
-#define SCSIOP_WRITE_VERIFY			0x2E
-#define SCSIOP_VERIFY				0x2F
-#define SCSIOP_SEARCH_DATA_HIGH		0x30
-#define SCSIOP_SEARCH_DATA_EQUAL	0x31
-#define SCSIOP_SEARCH_DATA_LOW		0x32
-#define SCSIOP_SET_LIMITS			0x33
-#define SCSIOP_READ_POSITION		0x34
-#define SCSIOP_SYNCHRONIZE_CACHE	0x35
-#define SCSIOP_COMPARE				0x39
-#define SCSIOP_COPY_COMPARE			0x3A
-#define SCSIOP_WRITE_DATA_BUFF		0x3B
-#define SCSIOP_READ_DATA_BUFF		0x3C
-#define SCSIOP_CHANGE_DEFINITION	0x40
-#define SCSIOP_READ_SUB_CHANNEL		0x42
-#define SCSIOP_READ_TOC				0x43
-#define SCSIOP_READ_HEADER			0x44
-#define SCSIOP_PLAY_AUDIO			0x45
-#define SCSIOP_PLAY_AUDIO_MSF		0x47
-#define SCSIOP_PLAY_TRACK_INDEX		0x48
-#define SCSIOP_PLAY_TRACK_RELATIVE	0x49
-#define SCSIOP_PAUSE_RESUME			0x4B
-#define SCSIOP_LOG_SELECT			0x4C
-#define SCSIOP_LOG_SENSE			0x4D
-#define SCSIOP_MODE_SELECT10		0x55
-#define SCSIOP_MODE_SENSE10			0x5A
-#define SCSIOP_LOAD_UNLOAD_SLOT		0xA6
-#define SCSIOP_MECHANISM_STATUS		0xBD
-#define SCSIOP_READ_CD				0xBE
-
-// SCSI read capacity structure
-typedef	struct _READ_CAPACITY_DATA
-	{
-	ULONG blks;				/* total blocks (converted to little endian) */
-	ULONG blksiz;			/* size of each (converted to little endian) */
-	}	READ_CAPACITY_DATA, *PREAD_CAPACITY_DATA;
-
-// SCSI inquiry data
-typedef struct _INQUIRYDATA
-	{
-	UCHAR DeviceType			:5;
-	UCHAR DeviceTypeQualifier	:3;
-	UCHAR DeviceTypeModifier	:7;
-	UCHAR RemovableMedia		:1;
-    UCHAR Versions;
-    UCHAR ResponseDataFormat;
-    UCHAR AdditionalLength;
-    UCHAR Reserved[2];
-	UCHAR SoftReset				:1;
-	UCHAR CommandQueue			:1;
-	UCHAR Reserved2				:1;
-	UCHAR LinkedCommands		:1;
-	UCHAR Synchronous			:1;
-	UCHAR Wide16Bit				:1;
-	UCHAR Wide32Bit				:1;
-	UCHAR RelativeAddressing	:1;
-    UCHAR VendorId[8];
-    UCHAR ProductId[16];
-    UCHAR ProductRevisionLevel[4];
-    UCHAR VendorSpecific[20];
-    UCHAR Reserved3[40];
-	}	INQUIRYDATA, *PINQUIRYDATA;
-
-#endif
-
-// function prototypes
-int Pci2000_Detect			(struct scsi_host_template *tpnt);
-int Pci2000_Command			(Scsi_Cmnd *SCpnt);
-int Pci2000_QueueCommand	(Scsi_Cmnd *SCpnt, void (*done)(Scsi_Cmnd *));
-int Pci2000_Abort			(Scsi_Cmnd *SCpnt);
-int Pci2000_Reset			(Scsi_Cmnd *SCpnt, unsigned int flags);
-int Pci2000_Release			(struct Scsi_Host *pshost);
-int Pci2000_BiosParam		(struct scsi_device *sdev,
-					struct block_device *bdev,
-					sector_t capacity, int geom[]);
-
-#endif
diff --git a/drivers/scsi/pcmcia/Kconfig b/drivers/scsi/pcmcia/Kconfig
index eac8e17..7dd787f 100644
--- a/drivers/scsi/pcmcia/Kconfig
+++ b/drivers/scsi/pcmcia/Kconfig
@@ -3,11 +3,11 @@
 #
 
 menu "PCMCIA SCSI adapter support"
-	depends on SCSI!=n && PCMCIA!=n && MODULES
+	depends on SCSI!=n && PCMCIA!=n
 
 config PCMCIA_AHA152X
 	tristate "Adaptec AHA152X PCMCIA support"
-	depends on m && !64BIT
+	depends on !64BIT
 	select SCSI_SPI_ATTRS
 	help
 	  Say Y here if you intend to attach this type of PCMCIA SCSI host
@@ -18,7 +18,6 @@
 
 config PCMCIA_FDOMAIN
 	tristate "Future Domain PCMCIA support"
-	depends on m
 	help
 	  Say Y here if you intend to attach this type of PCMCIA SCSI host
 	  adapter to your computer.
@@ -28,7 +27,7 @@
 
 config PCMCIA_NINJA_SCSI
 	tristate "NinjaSCSI-3 / NinjaSCSI-32Bi (16bit) PCMCIA support"
-	depends on m && !64BIT
+	depends on !64BIT
 	help
 	  If you intend to attach this type of PCMCIA SCSI host adapter to
 	  your computer, say Y here and read
@@ -62,7 +61,6 @@
 
 config PCMCIA_QLOGIC
 	tristate "Qlogic PCMCIA support"
-	depends on m
 	help
 	  Say Y here if you intend to attach this type of PCMCIA SCSI host
 	  adapter to your computer.
@@ -72,7 +70,6 @@
 
 config PCMCIA_SYM53C500
 	tristate "Symbios 53c500 PCMCIA support"
-	depends on m
 	help
 	  Say Y here if you have a New Media Bus Toaster or other PCMCIA
 	  SCSI adapter based on the Symbios 53c500 controller.
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index 05f4f2a..e8948b6 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -1478,14 +1478,17 @@
 	uint32_t b24 : 24;
 
 	struct {
-		uint8_t d_id[3];
-		uint8_t rsvd_1;
-	} r;
-
-	struct {
+#ifdef __BIG_ENDIAN
+		uint8_t domain;
+		uint8_t area;
+		uint8_t al_pa;
+#elif __LITTLE_ENDIAN
 		uint8_t al_pa;
 		uint8_t area;
 		uint8_t domain;
+#else
+#error "__BIG_ENDIAN or __LITTLE_ENDIAN must be defined!"
+#endif
 		uint8_t rsvd_1;
 	} b;
 } port_id_t;
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 98c01cd..3e296ab 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -11,6 +11,11 @@
 
 #include "qla_devtbl.h"
 
+#ifdef CONFIG_SPARC
+#include <asm/prom.h>
+#include <asm/pbm.h>
+#endif
+
 /* XXX(hch): this is ugly, but we don't want to pull in exioctl.h */
 #ifndef EXT_IS_LUN_BIT_SET
 #define EXT_IS_LUN_BIT_SET(P,L) \
@@ -88,12 +93,7 @@
 
 	qla_printk(KERN_INFO, ha, "Configure NVRAM parameters...\n");
 
-	rval = ha->isp_ops.nvram_config(ha);
-	if (rval) {
-		DEBUG2(printk("scsi(%ld): Unable to verify NVRAM data.\n",
-		    ha->host_no));
-		return rval;
-	}
+	ha->isp_ops.nvram_config(ha);
 
 	if (ha->flags.disable_serdes) {
 		/* Mask HBA via NVRAM settings? */
@@ -1393,6 +1393,28 @@
 	}
 }
 
+/* On sparc systems, obtain port and node WWN from firmware
+ * properties.
+ */
+static void qla2xxx_nvram_wwn_from_ofw(scsi_qla_host_t *ha, nvram_t *nv)
+{
+#ifdef CONFIG_SPARC
+	struct pci_dev *pdev = ha->pdev;
+	struct pcidev_cookie *pcp = pdev->sysdata;
+	struct device_node *dp = pcp->prom_node;
+	u8 *val;
+	int len;
+
+	val = of_get_property(dp, "port-wwn", &len);
+	if (val && len >= WWN_SIZE)
+		memcpy(nv->port_name, val, WWN_SIZE);
+
+	val = of_get_property(dp, "node-wwn", &len);
+	if (val && len >= WWN_SIZE)
+		memcpy(nv->node_name, val, WWN_SIZE);
+#endif
+}
+
 /*
 * NVRAM configuration for ISP 2xxx
 *
@@ -1409,6 +1431,7 @@
 int
 qla2x00_nvram_config(scsi_qla_host_t *ha)
 {
+	int             rval;
 	uint8_t         chksum = 0;
 	uint16_t        cnt;
 	uint8_t         *dptr1, *dptr2;
@@ -1417,6 +1440,8 @@
 	uint8_t         *ptr = (uint8_t *)ha->request_ring;
 	struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
 
+	rval = QLA_SUCCESS;
+
 	/* Determine NVRAM starting address. */
 	ha->nvram_size = sizeof(nvram_t);
 	ha->nvram_base = 0;
@@ -1440,7 +1465,57 @@
 		qla_printk(KERN_WARNING, ha, "Inconsistent NVRAM detected: "
 		    "checksum=0x%x id=%c version=0x%x.\n", chksum, nv->id[0],
 		    nv->nvram_version);
-		return QLA_FUNCTION_FAILED;
+		qla_printk(KERN_WARNING, ha, "Falling back to functioning (yet "
+		    "invalid -- WWPN) defaults.\n");
+
+		/*
+		 * Set default initialization control block.
+		 */
+		memset(nv, 0, ha->nvram_size);
+		nv->parameter_block_version = ICB_VERSION;
+
+		if (IS_QLA23XX(ha)) {
+			nv->firmware_options[0] = BIT_2 | BIT_1;
+			nv->firmware_options[1] = BIT_7 | BIT_5;
+			nv->add_firmware_options[0] = BIT_5;
+			nv->add_firmware_options[1] = BIT_5 | BIT_4;
+			nv->frame_payload_size = __constant_cpu_to_le16(2048);
+			nv->special_options[1] = BIT_7;
+		} else if (IS_QLA2200(ha)) {
+			nv->firmware_options[0] = BIT_2 | BIT_1;
+			nv->firmware_options[1] = BIT_7 | BIT_5;
+			nv->add_firmware_options[0] = BIT_5;
+			nv->add_firmware_options[1] = BIT_5 | BIT_4;
+			nv->frame_payload_size = __constant_cpu_to_le16(1024);
+		} else if (IS_QLA2100(ha)) {
+			nv->firmware_options[0] = BIT_3 | BIT_1;
+			nv->firmware_options[1] = BIT_5;
+			nv->frame_payload_size = __constant_cpu_to_le16(1024);
+		}
+
+		nv->max_iocb_allocation = __constant_cpu_to_le16(256);
+		nv->execution_throttle = __constant_cpu_to_le16(16);
+		nv->retry_count = 8;
+		nv->retry_delay = 1;
+
+		nv->port_name[0] = 33;
+		nv->port_name[3] = 224;
+		nv->port_name[4] = 139;
+
+		qla2xxx_nvram_wwn_from_ofw(ha, nv);
+
+		nv->login_timeout = 4;
+
+		/*
+		 * Set default host adapter parameters
+		 */
+		nv->host_p[1] = BIT_2;
+		nv->reset_delay = 5;
+		nv->port_down_retry_count = 8;
+		nv->max_luns_per_target = __constant_cpu_to_le16(8);
+		nv->link_down_timeout = 60;
+
+		rval = 1;
 	}
 
 #if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_SGI_SN2)
@@ -1653,7 +1728,11 @@
 		}
 	}
 
-	return QLA_SUCCESS;
+	if (rval) {
+		DEBUG2_3(printk(KERN_WARNING
+		    "scsi(%ld): NVRAM configuration failed!\n", ha->host_no));
+	}
+	return (rval);
 }
 
 static void
@@ -3071,9 +3150,7 @@
 
 		ha->isp_ops.get_flash_version(ha, ha->request_ring);
 
-		rval = ha->isp_ops.nvram_config(ha);
-		if (rval)
-			goto isp_abort_retry;
+		ha->isp_ops.nvram_config(ha);
 
 		if (!qla2x00_restart_isp(ha)) {
 			clear_bit(RESET_MARKER_NEEDED, &ha->dpc_flags);
@@ -3103,7 +3180,6 @@
 				}
 			}
 		} else {	/* failed the ISP abort */
-isp_abort_retry:
 			ha->flags.online = 1;
 			if (test_bit(ISP_ABORT_RETRY, &ha->dpc_flags)) {
 				if (ha->isp_abort_cnt == 0) {
@@ -3290,9 +3366,32 @@
 	spin_unlock_irqrestore(&ha->hardware_lock, flags);
 }
 
+/* On sparc systems, obtain port and node WWN from firmware
+ * properties.
+ */
+static void qla24xx_nvram_wwn_from_ofw(scsi_qla_host_t *ha, struct nvram_24xx *nv)
+{
+#ifdef CONFIG_SPARC
+	struct pci_dev *pdev = ha->pdev;
+	struct pcidev_cookie *pcp = pdev->sysdata;
+	struct device_node *dp = pcp->prom_node;
+	u8 *val;
+	int len;
+
+	val = of_get_property(dp, "port-wwn", &len);
+	if (val && len >= WWN_SIZE)
+		memcpy(nv->port_name, val, WWN_SIZE);
+
+	val = of_get_property(dp, "node-wwn", &len);
+	if (val && len >= WWN_SIZE)
+		memcpy(nv->node_name, val, WWN_SIZE);
+#endif
+}
+
 int
 qla24xx_nvram_config(scsi_qla_host_t *ha)
 {
+	int   rval;
 	struct init_cb_24xx *icb;
 	struct nvram_24xx *nv;
 	uint32_t *dptr;
@@ -3300,6 +3399,7 @@
 	uint32_t chksum;
 	uint16_t cnt;
 
+	rval = QLA_SUCCESS;
 	icb = (struct init_cb_24xx *)ha->init_cb;
 	nv = (struct nvram_24xx *)ha->request_ring;
 
@@ -3332,7 +3432,52 @@
 		qla_printk(KERN_WARNING, ha, "Inconsistent NVRAM detected: "
 		    "checksum=0x%x id=%c version=0x%x.\n", chksum, nv->id[0],
 		    le16_to_cpu(nv->nvram_version));
-		return QLA_FUNCTION_FAILED;
+		qla_printk(KERN_WARNING, ha, "Falling back to functioning (yet "
+		    "invalid -- WWPN) defaults.\n");
+
+		/*
+		 * Set default initialization control block.
+		 */
+		memset(nv, 0, ha->nvram_size);
+		nv->nvram_version = __constant_cpu_to_le16(ICB_VERSION);
+		nv->version = __constant_cpu_to_le16(ICB_VERSION);
+		nv->frame_payload_size = __constant_cpu_to_le16(2048);
+		nv->execution_throttle = __constant_cpu_to_le16(0xFFFF);
+		nv->exchange_count = __constant_cpu_to_le16(0);
+		nv->hard_address = __constant_cpu_to_le16(124);
+		nv->port_name[0] = 0x21;
+		nv->port_name[1] = 0x00 + PCI_FUNC(ha->pdev->devfn);
+		nv->port_name[2] = 0x00;
+		nv->port_name[3] = 0xe0;
+		nv->port_name[4] = 0x8b;
+		nv->port_name[5] = 0x1c;
+		nv->port_name[6] = 0x55;
+		nv->port_name[7] = 0x86;
+		nv->node_name[0] = 0x20;
+		nv->node_name[1] = 0x00;
+		nv->node_name[2] = 0x00;
+		nv->node_name[3] = 0xe0;
+		nv->node_name[4] = 0x8b;
+		nv->node_name[5] = 0x1c;
+		nv->node_name[6] = 0x55;
+		nv->node_name[7] = 0x86;
+		qla24xx_nvram_wwn_from_ofw(ha, nv);
+		nv->login_retry_count = __constant_cpu_to_le16(8);
+		nv->interrupt_delay_timer = __constant_cpu_to_le16(0);
+		nv->login_timeout = __constant_cpu_to_le16(0);
+		nv->firmware_options_1 =
+		    __constant_cpu_to_le32(BIT_14|BIT_13|BIT_2|BIT_1);
+		nv->firmware_options_2 = __constant_cpu_to_le32(2 << 4);
+		nv->firmware_options_2 |= __constant_cpu_to_le32(BIT_12);
+		nv->firmware_options_3 = __constant_cpu_to_le32(2 << 13);
+		nv->host_p = __constant_cpu_to_le32(BIT_11|BIT_10);
+		nv->efi_parameters = __constant_cpu_to_le32(0);
+		nv->reset_delay = 5;
+		nv->max_luns_per_target = __constant_cpu_to_le16(128);
+		nv->port_down_retry_count = __constant_cpu_to_le16(30);
+		nv->link_down_timeout = __constant_cpu_to_le16(30);
+
+		rval = 1;
 	}
 
 	/* Reset Initialization control block */
@@ -3479,7 +3624,11 @@
 		ha->flags.process_response_queue = 1;
 	}
 
-	return QLA_SUCCESS;
+	if (rval) {
+		DEBUG2_3(printk(KERN_WARNING
+		    "scsi(%ld): NVRAM configuration failed!\n", ha->host_no));
+	}
+	return (rval);
 }
 
 static int
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index 83376f6..71e32a24 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -1280,14 +1280,14 @@
 	} else {
 		if (name != NULL) {
 			/* This function returns name in big endian. */
-			name[0] = LSB(mcp->mb[2]);
-			name[1] = MSB(mcp->mb[2]);
-			name[2] = LSB(mcp->mb[3]);
-			name[3] = MSB(mcp->mb[3]);
-			name[4] = LSB(mcp->mb[6]);
-			name[5] = MSB(mcp->mb[6]);
-			name[6] = LSB(mcp->mb[7]);
-			name[7] = MSB(mcp->mb[7]);
+			name[0] = MSB(mcp->mb[2]);
+			name[1] = LSB(mcp->mb[2]);
+			name[2] = MSB(mcp->mb[3]);
+			name[3] = LSB(mcp->mb[3]);
+			name[4] = MSB(mcp->mb[6]);
+			name[5] = LSB(mcp->mb[6]);
+			name[6] = MSB(mcp->mb[7]);
+			name[7] = LSB(mcp->mb[7]);
 		}
 
 		DEBUG11(printk("qla2x00_get_port_name(%ld): done.\n",
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 68f5d24..b78919a 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -62,7 +62,7 @@
 		"vary by ISP type.  Default is 1 - allocate memory.");
 
 int ql2xextended_error_logging;
-module_param(ql2xextended_error_logging, int, S_IRUGO|S_IRUSR);
+module_param(ql2xextended_error_logging, int, S_IRUGO|S_IWUSR);
 MODULE_PARM_DESC(ql2xextended_error_logging,
 		"Option to enable extended error logging, "
 		"Default is 0 - no logging. 1 - log errors.");
@@ -157,6 +157,8 @@
 
 	.slave_alloc		= qla2xxx_slave_alloc,
 	.slave_destroy		= qla2xxx_slave_destroy,
+	.scan_finished		= qla2xxx_scan_finished,
+	.scan_start		= qla2xxx_scan_start,
 	.change_queue_depth	= qla2x00_change_queue_depth,
 	.change_queue_type	= qla2x00_change_queue_type,
 	.this_id		= -1,
@@ -1705,6 +1707,7 @@
 
 	scsi_host_put(ha->host);
 
+	pci_disable_device(pdev);
 	pci_set_drvdata(pdev, NULL);
 }
 
@@ -1747,8 +1750,6 @@
 	if (ha->iobase)
 		iounmap(ha->iobase);
 	pci_release_regions(ha->pdev);
-
-	pci_disable_device(ha->pdev);
 }
 
 static inline void
diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c
index ff1dd41..206bda0 100644
--- a/drivers/scsi/qla2xxx/qla_sup.c
+++ b/drivers/scsi/qla2xxx/qla_sup.c
@@ -466,6 +466,7 @@
 			udelay(10);
 		else
 			rval = QLA_FUNCTION_TIMEOUT;
+		cond_resched();
 	}
 
 	/* TODO: What happens if we time out? */
@@ -508,6 +509,7 @@
 			udelay(10);
 		else
 			rval = QLA_FUNCTION_TIMEOUT;
+		cond_resched();
 	}
 	return rval;
 }
@@ -1255,6 +1257,7 @@
 		}
 		udelay(10);
 		barrier();
+		cond_resched();
 	}
 	return status;
 }
@@ -1403,6 +1406,7 @@
 		if (saddr % 100)
 			udelay(10);
 		*tmp_buf = data;
+		cond_resched();
 	}
 }
 
@@ -1449,7 +1453,6 @@
 qla2x00_read_optrom_data(struct scsi_qla_host *ha, uint8_t *buf,
     uint32_t offset, uint32_t length)
 {
-	unsigned long flags;
 	uint32_t addr, midpoint;
 	uint8_t *data;
 	struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
@@ -1458,7 +1461,6 @@
 	qla2x00_suspend_hba(ha);
 
 	/* Go with read. */
-	spin_lock_irqsave(&ha->hardware_lock, flags);
 	midpoint = ha->optrom_size / 2;
 
 	qla2x00_flash_enable(ha);
@@ -1473,7 +1475,6 @@
 		*data = qla2x00_read_flash_byte(ha, addr);
 	}
 	qla2x00_flash_disable(ha);
-	spin_unlock_irqrestore(&ha->hardware_lock, flags);
 
 	/* Resume HBA. */
 	qla2x00_resume_hba(ha);
@@ -1487,7 +1488,6 @@
 {
 
 	int rval;
-	unsigned long flags;
 	uint8_t man_id, flash_id, sec_number, data;
 	uint16_t wd;
 	uint32_t addr, liter, sec_mask, rest_addr;
@@ -1500,7 +1500,6 @@
 	sec_number = 0;
 
 	/* Reset ISP chip. */
-	spin_lock_irqsave(&ha->hardware_lock, flags);
 	WRT_REG_WORD(&reg->ctrl_status, CSR_ISP_SOFT_RESET);
 	pci_read_config_word(ha->pdev, PCI_COMMAND, &wd);
 
@@ -1689,10 +1688,10 @@
 				rval = QLA_FUNCTION_FAILED;
 				break;
 			}
+			cond_resched();
 		}
 	} while (0);
 	qla2x00_flash_disable(ha);
-	spin_unlock_irqrestore(&ha->hardware_lock, flags);
 
 	/* Resume HBA. */
 	qla2x00_resume_hba(ha);
diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h
index 61347ae..dc85495 100644
--- a/drivers/scsi/qla2xxx/qla_version.h
+++ b/drivers/scsi/qla2xxx/qla_version.h
@@ -7,7 +7,7 @@
 /*
  * Driver version
  */
-#define QLA2XXX_VERSION      "8.01.07-k5"
+#define QLA2XXX_VERSION      "8.01.07-k6"
 
 #define QLA_DRIVER_MAJOR_VER	8
 #define QLA_DRIVER_MINOR_VER	1
diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c
index 1c89ee3..4c1e313 100644
--- a/drivers/scsi/scsi.c
+++ b/drivers/scsi/scsi.c
@@ -344,7 +344,6 @@
 void scsi_log_send(struct scsi_cmnd *cmd)
 {
 	unsigned int level;
-	struct scsi_device *sdev;
 
 	/*
 	 * If ML QUEUE log level is greater than or equal to:
@@ -361,22 +360,17 @@
 		level = SCSI_LOG_LEVEL(SCSI_LOG_MLQUEUE_SHIFT,
 				       SCSI_LOG_MLQUEUE_BITS);
 		if (level > 1) {
-			sdev = cmd->device;
-			sdev_printk(KERN_INFO, sdev, "send ");
+			scmd_printk(KERN_INFO, cmd, "Send: ");
 			if (level > 2)
 				printk("0x%p ", cmd);
-			/*
-			 * spaces to match disposition and cmd->result
-			 * output in scsi_log_completion.
-			 */
-			printk("                 ");
+			printk("\n");
 			scsi_print_command(cmd);
 			if (level > 3) {
 				printk(KERN_INFO "buffer = 0x%p, bufflen = %d,"
 				       " done = 0x%p, queuecommand 0x%p\n",
 					cmd->request_buffer, cmd->request_bufflen,
 					cmd->done,
-					sdev->host->hostt->queuecommand);
+					cmd->device->host->hostt->queuecommand);
 
 			}
 		}
@@ -386,7 +380,6 @@
 void scsi_log_completion(struct scsi_cmnd *cmd, int disposition)
 {
 	unsigned int level;
-	struct scsi_device *sdev;
 
 	/*
 	 * If ML COMPLETE log level is greater than or equal to:
@@ -405,8 +398,7 @@
 				       SCSI_LOG_MLCOMPLETE_BITS);
 		if (((level > 0) && (cmd->result || disposition != SUCCESS)) ||
 		    (level > 1)) {
-			sdev = cmd->device;
-			sdev_printk(KERN_INFO, sdev, "done ");
+			scmd_printk(KERN_INFO, cmd, "Done: ");
 			if (level > 2)
 				printk("0x%p ", cmd);
 			/*
@@ -415,40 +407,35 @@
 			 */
 			switch (disposition) {
 			case SUCCESS:
-				printk("SUCCESS");
+				printk("SUCCESS\n");
 				break;
 			case NEEDS_RETRY:
-				printk("RETRY  ");
+				printk("RETRY\n");
 				break;
 			case ADD_TO_MLQUEUE:
-				printk("MLQUEUE");
+				printk("MLQUEUE\n");
 				break;
 			case FAILED:
-				printk("FAILED ");
+				printk("FAILED\n");
 				break;
 			case TIMEOUT_ERROR:
 				/* 
 				 * If called via scsi_times_out.
 				 */
-				printk("TIMEOUT");
+				printk("TIMEOUT\n");
 				break;
 			default:
-				printk("UNKNOWN");
+				printk("UNKNOWN\n");
 			}
-			printk(" %8x ", cmd->result);
+			scsi_print_result(cmd);
 			scsi_print_command(cmd);
-			if (status_byte(cmd->result) & CHECK_CONDITION) {
-				/*
-				 * XXX The scsi_print_sense formatting/prefix
-				 * doesn't match this function.
-				 */
+			if (status_byte(cmd->result) & CHECK_CONDITION)
 				scsi_print_sense("", cmd);
-			}
-			if (level > 3) {
-				printk(KERN_INFO "scsi host busy %d failed %d\n",
-				       sdev->host->host_busy,
-				       sdev->host->host_failed);
-			}
+			if (level > 3)
+				scmd_printk(KERN_INFO, cmd,
+					    "scsi host busy %d failed %d\n",
+					    cmd->device->host->host_busy,
+					    cmd->device->host->host_failed);
 		}
 	}
 }
diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index 918bb60..3963e70 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -184,10 +184,19 @@
  **/
 void scsi_times_out(struct scsi_cmnd *scmd)
 {
+	enum scsi_eh_timer_return (* eh_timed_out)(struct scsi_cmnd *);
+
 	scsi_log_completion(scmd, TIMEOUT_ERROR);
 
 	if (scmd->device->host->transportt->eh_timed_out)
-		switch (scmd->device->host->transportt->eh_timed_out(scmd)) {
+		eh_timed_out = scmd->device->host->transportt->eh_timed_out;
+	else if (scmd->device->host->hostt->eh_timed_out)
+		eh_timed_out = scmd->device->host->hostt->eh_timed_out;
+	else
+		eh_timed_out = NULL;
+
+	if (eh_timed_out)
+		switch (eh_timed_out(scmd)) {
 		case EH_HANDLED:
 			__scsi_done(scmd);
 			return;
@@ -923,10 +932,12 @@
 	static unsigned char stu_command[6] = {START_STOP, 0, 0, 0, 1, 0};
 
 	if (scmd->device->allow_restart) {
-		int rtn;
+		int i, rtn = NEEDS_RETRY;
 
-		rtn = scsi_send_eh_cmnd(scmd, stu_command, 6,
-					START_UNIT_TIMEOUT, 0);
+		for (i = 0; rtn == NEEDS_RETRY && i < 2; i++)
+			rtn = scsi_send_eh_cmnd(scmd, stu_command, 6,
+						START_UNIT_TIMEOUT, 0);
+
 		if (rtn == SUCCESS)
 			return 0;
 	}
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 05d79af..61fbcdc 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -848,8 +848,8 @@
 				memcpy(req->sense, cmd->sense_buffer,  len);
 				req->sense_len = len;
 			}
-		} else
-			req->data_len = cmd->resid;
+		}
+		req->data_len = cmd->resid;
 	}
 
 	/*
@@ -968,9 +968,7 @@
 	}
 	if (result) {
 		if (!(req->cmd_flags & REQ_QUIET)) {
-			scmd_printk(KERN_INFO, cmd,
-				    "SCSI error: return code = 0x%08x\n",
-				    result);
+			scsi_print_result(cmd);
 			if (driver_byte(result) & DRIVER_SENSE)
 				scsi_print_sense("", cmd);
 		}
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index 0949145..a67f315 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -181,10 +181,8 @@
 	return 0;
 }
 
-#ifdef MODULE
 /* Only exported for the benefit of scsi_wait_scan */
 EXPORT_SYMBOL_GPL(scsi_complete_async_scans);
-#endif
 
 /**
  * scsi_unlock_floptical - unlock device via a special MODE SENSE command
diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index 939de0d..67a38a1 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -276,8 +276,22 @@
 	return (sdp->inq_periph_qual == SCSI_INQ_PQ_CON)? 1: 0;
 }
 
+static int scsi_bus_uevent(struct device *dev, char **envp, int num_envp,
+		           char *buffer, int buffer_size)
+{
+	struct scsi_device *sdev = to_scsi_device(dev);
+	int i = 0;
+	int length = 0;
+
+	add_uevent_var(envp, num_envp, &i, buffer, buffer_size, &length,
+		       "MODALIAS=" SCSI_DEVICE_MODALIAS_FMT, sdev->type);
+	envp[i] = NULL;
+	return 0;
+}
+
 static int scsi_bus_suspend(struct device * dev, pm_message_t state)
 {
+	struct device_driver *drv = dev->driver;
 	struct scsi_device *sdev = to_scsi_device(dev);
 	struct scsi_host_template *sht = sdev->host->hostt;
 	int err;
@@ -286,28 +300,51 @@
 	if (err)
 		return err;
 
-	if (sht->suspend)
-		err = sht->suspend(sdev, state);
+	/* call HLD suspend first */
+	if (drv && drv->suspend) {
+		err = drv->suspend(dev, state);
+		if (err)
+			return err;
+	}
 
-	return err;
+	/* then, call host suspend */
+	if (sht->suspend) {
+		err = sht->suspend(sdev, state);
+		if (err) {
+			if (drv && drv->resume)
+				drv->resume(dev);
+			return err;
+		}
+	}
+
+	return 0;
 }
 
 static int scsi_bus_resume(struct device * dev)
 {
+	struct device_driver *drv = dev->driver;
 	struct scsi_device *sdev = to_scsi_device(dev);
 	struct scsi_host_template *sht = sdev->host->hostt;
-	int err = 0;
+	int err = 0, err2 = 0;
 
+	/* call host resume first */
 	if (sht->resume)
 		err = sht->resume(sdev);
 
+	/* then, call HLD resume */
+	if (drv && drv->resume)
+		err2 = drv->resume(dev);
+
 	scsi_device_resume(sdev);
-	return err;
+
+	/* favor LLD failure */
+	return err ? err : err2;;
 }
 
 struct bus_type scsi_bus_type = {
         .name		= "scsi",
         .match		= scsi_bus_match,
+	.uevent		= scsi_bus_uevent,
 	.suspend	= scsi_bus_suspend,
 	.resume		= scsi_bus_resume,
 };
@@ -547,6 +584,14 @@
 show_sdev_iostat(iodone_cnt);
 show_sdev_iostat(ioerr_cnt);
 
+static ssize_t
+sdev_show_modalias(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct scsi_device *sdev;
+	sdev = to_scsi_device(dev);
+	return snprintf (buf, 20, SCSI_DEVICE_MODALIAS_FMT "\n", sdev->type);
+}
+static DEVICE_ATTR(modalias, S_IRUGO, sdev_show_modalias, NULL);
 
 /* Default template for device attributes.  May NOT be modified */
 static struct device_attribute *scsi_sysfs_sdev_attrs[] = {
@@ -566,6 +611,7 @@
 	&dev_attr_iorequest_cnt,
 	&dev_attr_iodone_cnt,
 	&dev_attr_ioerr_cnt,
+	&dev_attr_modalias,
 	NULL
 };
 
diff --git a/drivers/scsi/scsi_tgt_if.c b/drivers/scsi/scsi_tgt_if.c
index 0e08817..ca22ddf 100644
--- a/drivers/scsi/scsi_tgt_if.c
+++ b/drivers/scsi/scsi_tgt_if.c
@@ -179,10 +179,12 @@
 	switch (ev->hdr.type) {
 	case TGT_UEVENT_CMD_RSP:
 		err = scsi_tgt_kspace_exec(ev->p.cmd_rsp.host_no,
-					   ev->p.cmd_rsp.tag,
 					   ev->p.cmd_rsp.result,
-					   ev->p.cmd_rsp.len,
+					   ev->p.cmd_rsp.tag,
 					   ev->p.cmd_rsp.uaddr,
+					   ev->p.cmd_rsp.len,
+					   ev->p.cmd_rsp.sense_uaddr,
+					   ev->p.cmd_rsp.sense_len,
 					   ev->p.cmd_rsp.rw);
 		break;
 	case TGT_UEVENT_TSK_MGMT_RSP:
diff --git a/drivers/scsi/scsi_tgt_lib.c b/drivers/scsi/scsi_tgt_lib.c
index d402aff..2570f48 100644
--- a/drivers/scsi/scsi_tgt_lib.c
+++ b/drivers/scsi/scsi_tgt_lib.c
@@ -28,7 +28,6 @@
 #include <scsi/scsi_device.h>
 #include <scsi/scsi_host.h>
 #include <scsi/scsi_tgt.h>
-#include <../drivers/md/dm-bio-list.h>
 
 #include "scsi_tgt_priv.h"
 
@@ -42,16 +41,12 @@
 struct scsi_tgt_cmd {
 	/* TODO replace work with James b's code */
 	struct work_struct work;
-	/* TODO replace the lists with a large bio */
-	struct bio_list xfer_done_list;
-	struct bio_list xfer_list;
+	/* TODO fix limits of some drivers */
+	struct bio *bio;
 
 	struct list_head hash_list;
 	struct request *rq;
 	u64 tag;
-
-	void *buffer;
-	unsigned bufflen;
 };
 
 #define TGT_HASH_ORDER	4
@@ -93,7 +88,12 @@
 	if (!tcmd)
 		goto put_dev;
 
-	rq = blk_get_request(shost->uspace_req_q, write, gfp_mask);
+	/*
+	 * The blk helpers are used to the READ/WRITE requests
+	 * transfering data from a initiator point of view. Since
+	 * we are in target mode we want the opposite.
+	 */
+	rq = blk_get_request(shost->uspace_req_q, !write, gfp_mask);
 	if (!rq)
 		goto free_tcmd;
 
@@ -111,8 +111,6 @@
 	rq->cmd_flags |= REQ_TYPE_BLOCK_PC;
 	rq->end_io_data = tcmd;
 
-	bio_list_init(&tcmd->xfer_list);
-	bio_list_init(&tcmd->xfer_done_list);
 	tcmd->rq = rq;
 
 	return cmd;
@@ -157,22 +155,6 @@
 }
 EXPORT_SYMBOL_GPL(scsi_host_put_command);
 
-static void scsi_unmap_user_pages(struct scsi_tgt_cmd *tcmd)
-{
-	struct bio *bio;
-
-	/* must call bio_endio in case bio was bounced */
-	while ((bio = bio_list_pop(&tcmd->xfer_done_list))) {
-		bio_endio(bio, bio->bi_size, 0);
-		bio_unmap_user(bio);
-	}
-
-	while ((bio = bio_list_pop(&tcmd->xfer_list))) {
-		bio_endio(bio, bio->bi_size, 0);
-		bio_unmap_user(bio);
-	}
-}
-
 static void cmd_hashlist_del(struct scsi_cmnd *cmd)
 {
 	struct request_queue *q = cmd->request->q;
@@ -185,6 +167,11 @@
 	spin_unlock_irqrestore(&qdata->cmd_hash_lock, flags);
 }
 
+static void scsi_unmap_user_pages(struct scsi_tgt_cmd *tcmd)
+{
+	blk_rq_unmap_user(tcmd->bio);
+}
+
 static void scsi_tgt_cmd_destroy(struct work_struct *work)
 {
 	struct scsi_tgt_cmd *tcmd =
@@ -193,16 +180,6 @@
 
 	dprintk("cmd %p %d %lu\n", cmd, cmd->sc_data_direction,
 		rq_data_dir(cmd->request));
-	/*
-	 * We fix rq->cmd_flags here since when we told bio_map_user
-	 * to write vm for WRITE commands, blk_rq_bio_prep set
-	 * rq_data_dir the flags to READ.
-	 */
-	if (cmd->sc_data_direction == DMA_TO_DEVICE)
-		cmd->request->cmd_flags |= REQ_RW;
-	else
-		cmd->request->cmd_flags &= ~REQ_RW;
-
 	scsi_unmap_user_pages(tcmd);
 	scsi_host_put_command(scsi_tgt_cmd_to_host(cmd), cmd);
 }
@@ -215,6 +192,7 @@
 	struct list_head *head;
 
 	tcmd->tag = tag;
+	tcmd->bio = NULL;
 	INIT_WORK(&tcmd->work, scsi_tgt_cmd_destroy);
 	spin_lock_irqsave(&qdata->cmd_hash_lock, flags);
 	head = &qdata->cmd_hash[cmd_hashfn(tag)];
@@ -349,10 +327,14 @@
 	dprintk("cmd %p %lu\n", cmd, rq_data_dir(cmd->request));
 
 	scsi_tgt_uspace_send_status(cmd, tcmd->tag);
+
+	if (cmd->request_buffer)
+		scsi_free_sgtable(cmd->request_buffer, cmd->sglist_len);
+
 	queue_work(scsi_tgtd, &tcmd->work);
 }
 
-static int __scsi_tgt_transfer_response(struct scsi_cmnd *cmd)
+static int scsi_tgt_transfer_response(struct scsi_cmnd *cmd)
 {
 	struct Scsi_Host *shost = scsi_tgt_cmd_to_host(cmd);
 	int err;
@@ -365,30 +347,12 @@
 	case SCSI_MLQUEUE_DEVICE_BUSY:
 		return -EAGAIN;
 	}
-
 	return 0;
 }
 
-static void scsi_tgt_transfer_response(struct scsi_cmnd *cmd)
-{
-	struct scsi_tgt_cmd *tcmd = cmd->request->end_io_data;
-	int err;
-
-	err = __scsi_tgt_transfer_response(cmd);
-	if (!err)
-		return;
-
-	cmd->result = DID_BUS_BUSY << 16;
-	err = scsi_tgt_uspace_send_status(cmd, tcmd->tag);
-	if (err <= 0)
-		/* the eh will have to pick this up */
-		printk(KERN_ERR "Could not send cmd %p status\n", cmd);
-}
-
 static int scsi_tgt_init_cmd(struct scsi_cmnd *cmd, gfp_t gfp_mask)
 {
 	struct request *rq = cmd->request;
-	struct scsi_tgt_cmd *tcmd = rq->end_io_data;
 	int count;
 
 	cmd->use_sg = rq->nr_phys_segments;
@@ -398,143 +362,54 @@
 
 	cmd->request_bufflen = rq->data_len;
 
-	dprintk("cmd %p addr %p cnt %d %lu\n", cmd, tcmd->buffer, cmd->use_sg,
-		rq_data_dir(rq));
+	dprintk("cmd %p cnt %d %lu\n", cmd, cmd->use_sg, rq_data_dir(rq));
 	count = blk_rq_map_sg(rq->q, rq, cmd->request_buffer);
 	if (likely(count <= cmd->use_sg)) {
 		cmd->use_sg = count;
 		return 0;
 	}
 
-	eprintk("cmd %p addr %p cnt %d\n", cmd, tcmd->buffer, cmd->use_sg);
+	eprintk("cmd %p cnt %d\n", cmd, cmd->use_sg);
 	scsi_free_sgtable(cmd->request_buffer, cmd->sglist_len);
 	return -EINVAL;
 }
 
 /* TODO: test this crap and replace bio_map_user with new interface maybe */
 static int scsi_map_user_pages(struct scsi_tgt_cmd *tcmd, struct scsi_cmnd *cmd,
-			       int rw)
+			       unsigned long uaddr, unsigned int len, int rw)
 {
 	struct request_queue *q = cmd->request->q;
 	struct request *rq = cmd->request;
-	void *uaddr = tcmd->buffer;
-	unsigned int len = tcmd->bufflen;
-	struct bio *bio;
 	int err;
 
-	while (len > 0) {
-		dprintk("%lx %u\n", (unsigned long) uaddr, len);
-		bio = bio_map_user(q, NULL, (unsigned long) uaddr, len, rw);
-		if (IS_ERR(bio)) {
-			err = PTR_ERR(bio);
-			dprintk("fail to map %lx %u %d %x\n",
-				(unsigned long) uaddr, len, err, cmd->cmnd[0]);
-			goto unmap_bios;
-		}
-
-		uaddr += bio->bi_size;
-		len -= bio->bi_size;
-
+	dprintk("%lx %u\n", uaddr, len);
+	err = blk_rq_map_user(q, rq, (void *)uaddr, len);
+	if (err) {
 		/*
-		 * The first bio is added and merged. We could probably
-		 * try to add others using scsi_merge_bio() but for now
-		 * we keep it simple. The first bio should be pretty large
-		 * (either hitting the 1 MB bio pages limit or a queue limit)
-		 * already but for really large IO we may want to try and
-		 * merge these.
+		 * TODO: need to fixup sg_tablesize, max_segment_size,
+		 * max_sectors, etc for modern HW and software drivers
+		 * where this value is bogus.
+		 *
+		 * TODO2: we can alloc a reserve buffer of max size
+		 * we can handle and do the slow copy path for really large
+		 * IO.
 		 */
-		if (!rq->bio) {
-			blk_rq_bio_prep(q, rq, bio);
-			rq->data_len = bio->bi_size;
-		} else
-			/* put list of bios to transfer in next go around */
-			bio_list_add(&tcmd->xfer_list, bio);
+		eprintk("Could not handle request of size %u.\n", len);
+		return err;
 	}
 
-	cmd->offset = 0;
+	tcmd->bio = rq->bio;
 	err = scsi_tgt_init_cmd(cmd, GFP_KERNEL);
 	if (err)
-		goto unmap_bios;
+		goto unmap_rq;
 
 	return 0;
 
-unmap_bios:
-	if (rq->bio) {
-		bio_unmap_user(rq->bio);
-		while ((bio = bio_list_pop(&tcmd->xfer_list)))
-			bio_unmap_user(bio);
-	}
-
+unmap_rq:
+	scsi_unmap_user_pages(tcmd);
 	return err;
 }
 
-static int scsi_tgt_transfer_data(struct scsi_cmnd *);
-
-static void scsi_tgt_data_transfer_done(struct scsi_cmnd *cmd)
-{
-	struct scsi_tgt_cmd *tcmd = cmd->request->end_io_data;
-	struct bio *bio;
-	int err;
-
-	/* should we free resources here on error ? */
-	if (cmd->result) {
-send_uspace_err:
-		err = scsi_tgt_uspace_send_status(cmd, tcmd->tag);
-		if (err <= 0)
-			/* the tgt uspace eh will have to pick this up */
-			printk(KERN_ERR "Could not send cmd %p status\n", cmd);
-		return;
-	}
-
-	dprintk("cmd %p request_bufflen %u bufflen %u\n",
-		cmd, cmd->request_bufflen, tcmd->bufflen);
-
-	scsi_free_sgtable(cmd->request_buffer, cmd->sglist_len);
-	bio_list_add(&tcmd->xfer_done_list, cmd->request->bio);
-
-	tcmd->buffer += cmd->request_bufflen;
-	cmd->offset += cmd->request_bufflen;
-
-	if (!tcmd->xfer_list.head) {
-		scsi_tgt_transfer_response(cmd);
-		return;
-	}
-
-	dprintk("cmd2 %p request_bufflen %u bufflen %u\n",
-		cmd, cmd->request_bufflen, tcmd->bufflen);
-
-	bio = bio_list_pop(&tcmd->xfer_list);
-	BUG_ON(!bio);
-
-	blk_rq_bio_prep(cmd->request->q, cmd->request, bio);
-	cmd->request->data_len = bio->bi_size;
-	err = scsi_tgt_init_cmd(cmd, GFP_ATOMIC);
-	if (err) {
-		cmd->result = DID_ERROR << 16;
-		goto send_uspace_err;
-	}
-
-	if (scsi_tgt_transfer_data(cmd)) {
-		cmd->result = DID_NO_CONNECT << 16;
-		goto send_uspace_err;
-	}
-}
-
-static int scsi_tgt_transfer_data(struct scsi_cmnd *cmd)
-{
-	int err;
-	struct Scsi_Host *host = scsi_tgt_cmd_to_host(cmd);
-
-	err = host->hostt->transfer_data(cmd, scsi_tgt_data_transfer_done);
-	switch (err) {
-		case SCSI_MLQUEUE_HOST_BUSY:
-		case SCSI_MLQUEUE_DEVICE_BUSY:
-			return -EAGAIN;
-	default:
-		return 0;
-	}
-}
-
 static int scsi_tgt_copy_sense(struct scsi_cmnd *cmd, unsigned long uaddr,
 				unsigned len)
 {
@@ -584,8 +459,9 @@
 	return rq;
 }
 
-int scsi_tgt_kspace_exec(int host_no, u64 tag, int result, u32 len,
-			 unsigned long uaddr, u8 rw)
+int scsi_tgt_kspace_exec(int host_no, int result, u64 tag,
+			 unsigned long uaddr, u32 len, unsigned long sense_uaddr,
+			 u32 sense_len, u8 rw)
 {
 	struct Scsi_Host *shost;
 	struct scsi_cmnd *cmd;
@@ -617,8 +493,9 @@
 	}
 	cmd = rq->special;
 
-	dprintk("cmd %p result %d len %d bufflen %u %lu %x\n", cmd,
-		result, len, cmd->request_bufflen, rq_data_dir(rq), cmd->cmnd[0]);
+	dprintk("cmd %p scb %x result %d len %d bufflen %u %lu %x\n",
+		cmd, cmd->cmnd[0], result, len, cmd->request_bufflen,
+		rq_data_dir(rq), cmd->cmnd[0]);
 
 	if (result == TASK_ABORTED) {
 		scsi_tgt_abort_cmd(shost, cmd);
@@ -629,36 +506,36 @@
 	 * in the request_* values
 	 */
 	tcmd = cmd->request->end_io_data;
-	tcmd->buffer = (void *)uaddr;
-	tcmd->bufflen = len;
 	cmd->result = result;
 
-	if (!tcmd->bufflen || cmd->request_buffer) {
-		err = __scsi_tgt_transfer_response(cmd);
-		goto done;
-	}
+	if (cmd->result == SAM_STAT_CHECK_CONDITION)
+		scsi_tgt_copy_sense(cmd, sense_uaddr, sense_len);
 
-	/*
-	 * TODO: Do we need to handle case where request does not
-	 * align with LLD.
-	 */
-	err = scsi_map_user_pages(rq->end_io_data, cmd, rw);
-	if (err) {
-		eprintk("%p %d\n", cmd, err);
-		err = -EAGAIN;
-		goto done;
-	}
+	if (len) {
+		err = scsi_map_user_pages(rq->end_io_data, cmd, uaddr, len, rw);
+		if (err) {
+			/*
+			 * user-space daemon bugs or OOM
+			 * TODO: we can do better for OOM.
+			 */
+			struct scsi_tgt_queuedata *qdata;
+			struct list_head *head;
+			unsigned long flags;
 
-	/* userspace failure */
-	if (cmd->result) {
-		if (status_byte(cmd->result) == CHECK_CONDITION)
-			scsi_tgt_copy_sense(cmd, uaddr, len);
-		err = __scsi_tgt_transfer_response(cmd);
-		goto done;
-	}
-	/* ask the target LLD to transfer the data to the buffer */
-	err = scsi_tgt_transfer_data(cmd);
+			eprintk("cmd %p ret %d uaddr %lx len %d rw %d\n",
+				cmd, err, uaddr, len, rw);
 
+			qdata = shost->uspace_req_q->queuedata;
+			head = &qdata->cmd_hash[cmd_hashfn(tcmd->tag)];
+
+			spin_lock_irqsave(&qdata->cmd_hash_lock, flags);
+			list_add(&tcmd->hash_list, head);
+			spin_unlock_irqrestore(&qdata->cmd_hash_lock, flags);
+
+			goto done;
+		}
+	}
+	err = scsi_tgt_transfer_response(cmd);
 done:
 	scsi_host_put(shost);
 	return err;
diff --git a/drivers/scsi/scsi_tgt_priv.h b/drivers/scsi/scsi_tgt_priv.h
index 84488c5..e9e6db1 100644
--- a/drivers/scsi/scsi_tgt_priv.h
+++ b/drivers/scsi/scsi_tgt_priv.h
@@ -18,8 +18,9 @@
 extern int scsi_tgt_uspace_send_cmd(struct scsi_cmnd *cmd, struct scsi_lun *lun,
 				    u64 tag);
 extern int scsi_tgt_uspace_send_status(struct scsi_cmnd *cmd, u64 tag);
-extern int scsi_tgt_kspace_exec(int host_no, u64 tag, int result, u32 len,
-				unsigned long uaddr, u8 rw);
+extern int scsi_tgt_kspace_exec(int host_no, int result, u64 tag,
+				unsigned long uaddr, u32 len, unsigned long sense_uaddr,
+				u32 sense_len, u8 rw);
 extern int scsi_tgt_uspace_send_tsk_mgmt(int host_no, int function, u64 tag,
 					 struct scsi_lun *scsilun, void *data);
 extern int scsi_tgt_kspace_tsk_mgmt(int host_no, u64 mid, int result);
diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c
index 58afdb4..14c4f06 100644
--- a/drivers/scsi/scsi_transport_fc.c
+++ b/drivers/scsi/scsi_transport_fc.c
@@ -200,6 +200,8 @@
 	{ FC_PORTSPEED_2GBIT,		"2 Gbit" },
 	{ FC_PORTSPEED_4GBIT,		"4 Gbit" },
 	{ FC_PORTSPEED_10GBIT,		"10 Gbit" },
+	{ FC_PORTSPEED_8GBIT,		"8 Gbit" },
+	{ FC_PORTSPEED_16GBIT,		"16 Gbit" },
 	{ FC_PORTSPEED_NOT_NEGOTIATED,	"Not Negotiated" },
 };
 fc_bitfield_name_search(port_speed, fc_port_speed_names)
diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c
index aabaa05..caf1836 100644
--- a/drivers/scsi/scsi_transport_iscsi.c
+++ b/drivers/scsi/scsi_transport_iscsi.c
@@ -49,7 +49,7 @@
 	struct class_device_attribute *session_attrs[ISCSI_SESSION_ATTRS + 1];
 };
 
-static int iscsi_session_nr;	/* sysfs session id for next new session */
+static atomic_t iscsi_session_nr; /* sysfs session id for next new session */
 
 /*
  * list of registered transports and lock that must
@@ -300,7 +300,7 @@
 	int err;
 
 	ihost = shost->shost_data;
-	session->sid = iscsi_session_nr++;
+	session->sid = atomic_add_return(1, &iscsi_session_nr);
 	session->target_id = target_id;
 
 	snprintf(session->dev.bus_id, BUS_ID_SIZE, "session%u",
@@ -1419,6 +1419,8 @@
 	printk(KERN_INFO "Loading iSCSI transport class v%s.\n",
 		ISCSI_TRANSPORT_VERSION);
 
+	atomic_set(&iscsi_session_nr, 0);
+
 	err = class_register(&iscsi_transport_class);
 	if (err)
 		return err;
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 5a8f55f..00e4666 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -58,16 +58,10 @@
 #include <scsi/scsi_host.h>
 #include <scsi/scsi_ioctl.h>
 #include <scsi/scsicam.h>
+#include <scsi/sd.h>
 
 #include "scsi_logging.h"
 
-/*
- * More than enough for everybody ;)  The huge number of majors
- * is a leftover from 16bit dev_t days, we don't really need that
- * much numberspace.
- */
-#define SD_MAJORS	16
-
 MODULE_AUTHOR("Eric Youngdale");
 MODULE_DESCRIPTION("SCSI disk (sd) driver");
 MODULE_LICENSE("GPL");
@@ -88,45 +82,9 @@
 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK13_MAJOR);
 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK14_MAJOR);
 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK15_MAJOR);
-
-/*
- * This is limited by the naming scheme enforced in sd_probe,
- * add another character to it if you really need more disks.
- */
-#define SD_MAX_DISKS	(((26 * 26) + 26 + 1) * 26)
-
-/*
- * Time out in seconds for disks and Magneto-opticals (which are slower).
- */
-#define SD_TIMEOUT		(30 * HZ)
-#define SD_MOD_TIMEOUT		(75 * HZ)
-
-/*
- * Number of allowed retries
- */
-#define SD_MAX_RETRIES		5
-#define SD_PASSTHROUGH_RETRIES	1
-
-/*
- * Size of the initial data buffer for mode and read capacity data
- */
-#define SD_BUF_SIZE		512
-
-struct scsi_disk {
-	struct scsi_driver *driver;	/* always &sd_template */
-	struct scsi_device *device;
-	struct class_device cdev;
-	struct gendisk	*disk;
-	unsigned int	openers;	/* protected by BKL for now, yuck */
-	sector_t	capacity;	/* size in 512-byte sectors */
-	u32		index;
-	u8		media_present;
-	u8		write_prot;
-	unsigned	WCE : 1;	/* state of disk WCE bit */
-	unsigned	RCD : 1;	/* state of disk RCD bit, unused */
-	unsigned	DPOFUA : 1;	/* state of disk DPOFUA bit */
-};
-#define to_scsi_disk(obj) container_of(obj,struct scsi_disk,cdev)
+MODULE_ALIAS_SCSI_DEVICE(TYPE_DISK);
+MODULE_ALIAS_SCSI_DEVICE(TYPE_MOD);
+MODULE_ALIAS_SCSI_DEVICE(TYPE_RBC);
 
 static DEFINE_IDR(sd_index_idr);
 static DEFINE_SPINLOCK(sd_index_lock);
@@ -136,20 +94,6 @@
  * object after last put) */
 static DEFINE_MUTEX(sd_ref_mutex);
 
-static int sd_revalidate_disk(struct gendisk *disk);
-static void sd_rw_intr(struct scsi_cmnd * SCpnt);
-
-static int sd_probe(struct device *);
-static int sd_remove(struct device *);
-static void sd_shutdown(struct device *dev);
-static void sd_rescan(struct device *);
-static int sd_init_command(struct scsi_cmnd *);
-static int sd_issue_flush(struct device *, sector_t *);
-static void sd_prepare_flush(request_queue_t *, struct request *);
-static void sd_read_capacity(struct scsi_disk *sdkp, char *diskname,
-			     unsigned char *buffer);
-static void scsi_disk_release(struct class_device *cdev);
-
 static const char *sd_cache_types[] = {
 	"write through", "none", "write back",
 	"write back, no read (daft)"
@@ -199,13 +143,27 @@
 	if (scsi_mode_select(sdp, 1, sp, 8, buffer_data, len, SD_TIMEOUT,
 			     SD_MAX_RETRIES, &data, &sshdr)) {
 		if (scsi_sense_valid(&sshdr))
-			scsi_print_sense_hdr(sdkp->disk->disk_name, &sshdr);
+			sd_print_sense_hdr(sdkp, &sshdr);
 		return -EINVAL;
 	}
 	sd_revalidate_disk(sdkp->disk);
 	return count;
 }
 
+static ssize_t sd_store_manage_start_stop(struct class_device *cdev,
+					  const char *buf, size_t count)
+{
+	struct scsi_disk *sdkp = to_scsi_disk(cdev);
+	struct scsi_device *sdp = sdkp->device;
+
+	if (!capable(CAP_SYS_ADMIN))
+		return -EACCES;
+
+	sdp->manage_start_stop = simple_strtoul(buf, NULL, 10);
+
+	return count;
+}
+
 static ssize_t sd_store_allow_restart(struct class_device *cdev, const char *buf,
 				      size_t count)
 {
@@ -238,6 +196,14 @@
 	return snprintf(buf, 20, "%u\n", sdkp->DPOFUA);
 }
 
+static ssize_t sd_show_manage_start_stop(struct class_device *cdev, char *buf)
+{
+	struct scsi_disk *sdkp = to_scsi_disk(cdev);
+	struct scsi_device *sdp = sdkp->device;
+
+	return snprintf(buf, 20, "%u\n", sdp->manage_start_stop);
+}
+
 static ssize_t sd_show_allow_restart(struct class_device *cdev, char *buf)
 {
 	struct scsi_disk *sdkp = to_scsi_disk(cdev);
@@ -251,6 +217,8 @@
 	__ATTR(FUA, S_IRUGO, sd_show_fua, NULL),
 	__ATTR(allow_restart, S_IRUGO|S_IWUSR, sd_show_allow_restart,
 	       sd_store_allow_restart),
+	__ATTR(manage_start_stop, S_IRUGO|S_IWUSR, sd_show_manage_start_stop,
+	       sd_store_manage_start_stop),
 	__ATTR_NULL,
 };
 
@@ -267,6 +235,8 @@
 		.name		= "sd",
 		.probe		= sd_probe,
 		.remove		= sd_remove,
+		.suspend	= sd_suspend,
+		.resume		= sd_resume,
 		.shutdown	= sd_shutdown,
 	},
 	.rescan			= sd_rescan,
@@ -371,15 +341,19 @@
 	unsigned int this_count = SCpnt->request_bufflen >> 9;
 	unsigned int timeout = sdp->timeout;
 
-	SCSI_LOG_HLQUEUE(1, printk("sd_init_command: disk=%s, block=%llu, "
-			    "count=%d\n", disk->disk_name,
-			 (unsigned long long)block, this_count));
+	SCSI_LOG_HLQUEUE(1, scmd_printk(KERN_INFO, SCpnt,
+					"sd_init_command: block=%llu, "
+					"count=%d\n",
+					(unsigned long long)block,
+					this_count));
 
 	if (!sdp || !scsi_device_online(sdp) ||
  	    block + rq->nr_sectors > get_capacity(disk)) {
-		SCSI_LOG_HLQUEUE(2, printk("Finishing %ld sectors\n", 
-				 rq->nr_sectors));
-		SCSI_LOG_HLQUEUE(2, printk("Retry with 0x%p\n", SCpnt));
+		SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt,
+						"Finishing %ld sectors\n",
+						rq->nr_sectors));
+		SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt,
+						"Retry with 0x%p\n", SCpnt));
 		return 0;
 	}
 
@@ -391,8 +365,8 @@
 		/* printk("SCSI disk has been changed. Prohibiting further I/O.\n"); */
 		return 0;
 	}
-	SCSI_LOG_HLQUEUE(2, printk("%s : block=%llu\n",
-				   disk->disk_name, (unsigned long long)block));
+	SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt, "block=%llu\n",
+					(unsigned long long)block));
 
 	/*
 	 * If we have a 1K hardware sectorsize, prevent access to single
@@ -407,7 +381,8 @@
 	 */
 	if (sdp->sector_size == 1024) {
 		if ((block & 1) || (rq->nr_sectors & 1)) {
-			printk(KERN_ERR "sd: Bad block number requested");
+			scmd_printk(KERN_ERR, SCpnt,
+				    "Bad block number requested\n");
 			return 0;
 		} else {
 			block = block >> 1;
@@ -416,7 +391,8 @@
 	}
 	if (sdp->sector_size == 2048) {
 		if ((block & 3) || (rq->nr_sectors & 3)) {
-			printk(KERN_ERR "sd: Bad block number requested");
+			scmd_printk(KERN_ERR, SCpnt,
+				    "Bad block number requested\n");
 			return 0;
 		} else {
 			block = block >> 2;
@@ -425,7 +401,8 @@
 	}
 	if (sdp->sector_size == 4096) {
 		if ((block & 7) || (rq->nr_sectors & 7)) {
-			printk(KERN_ERR "sd: Bad block number requested");
+			scmd_printk(KERN_ERR, SCpnt,
+				    "Bad block number requested\n");
 			return 0;
 		} else {
 			block = block >> 3;
@@ -442,13 +419,15 @@
 		SCpnt->cmnd[0] = READ_6;
 		SCpnt->sc_data_direction = DMA_FROM_DEVICE;
 	} else {
-		printk(KERN_ERR "sd: Unknown command %x\n", rq->cmd_flags);
+		scmd_printk(KERN_ERR, SCpnt, "Unknown command %x\n", rq->cmd_flags);
 		return 0;
 	}
 
-	SCSI_LOG_HLQUEUE(2, printk("%s : %s %d/%ld 512 byte blocks.\n", 
-		disk->disk_name, (rq_data_dir(rq) == WRITE) ? 
-		"writing" : "reading", this_count, rq->nr_sectors));
+	SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt,
+					"%s %d/%ld 512 byte blocks.\n",
+					(rq_data_dir(rq) == WRITE) ?
+					"writing" : "reading", this_count,
+					rq->nr_sectors));
 
 	SCpnt->cmnd[1] = 0;
 	
@@ -490,7 +469,8 @@
 			 * during operation and thus turned off
 			 * use_10_for_rw.
 			 */
-			printk(KERN_ERR "sd: FUA write on READ/WRITE(6) drive\n");
+			scmd_printk(KERN_ERR, SCpnt,
+				    "FUA write on READ/WRITE(6) drive\n");
 			return 0;
 		}
 
@@ -549,7 +529,7 @@
 		return -ENXIO;
 
 
-	SCSI_LOG_HLQUEUE(3, printk("sd_open: disk=%s\n", disk->disk_name));
+	SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp, "sd_open\n"));
 
 	sdev = sdkp->device;
 
@@ -619,7 +599,7 @@
 	struct scsi_disk *sdkp = scsi_disk(disk);
 	struct scsi_device *sdev = sdkp->device;
 
-	SCSI_LOG_HLQUEUE(3, printk("sd_release: disk=%s\n", disk->disk_name));
+	SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp, "sd_release\n"));
 
 	if (!--sdkp->openers && sdev->removable) {
 		if (scsi_block_when_processing_errors(sdev))
@@ -732,8 +712,7 @@
 	struct scsi_device *sdp = sdkp->device;
 	int retval;
 
-	SCSI_LOG_HLQUEUE(3, printk("sd_media_changed: disk=%s\n",
-						disk->disk_name));
+	SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp, "sd_media_changed\n"));
 
 	if (!sdp->removable)
 		return 0;
@@ -786,9 +765,10 @@
 	return 1;
 }
 
-static int sd_sync_cache(struct scsi_device *sdp)
+static int sd_sync_cache(struct scsi_disk *sdkp)
 {
 	int retries, res;
+	struct scsi_device *sdp = sdkp->device;
 	struct scsi_sense_hdr sshdr;
 
 	if (!scsi_device_online(sdp))
@@ -809,28 +789,27 @@
 			break;
 	}
 
-	if (res) {		printk(KERN_WARNING "FAILED\n  status = %x, message = %02x, "
-				    "host = %d, driver = %02x\n  ",
-				    status_byte(res), msg_byte(res),
-				    host_byte(res), driver_byte(res));
-			if (driver_byte(res) & DRIVER_SENSE)
-				scsi_print_sense_hdr("sd", &sshdr);
+	if (res) {
+		sd_print_result(sdkp, res);
+		if (driver_byte(res) & DRIVER_SENSE)
+			sd_print_sense_hdr(sdkp, &sshdr);
 	}
 
-	return res;
+	if (res)
+		return -EIO;
+	return 0;
 }
 
 static int sd_issue_flush(struct device *dev, sector_t *error_sector)
 {
 	int ret = 0;
-	struct scsi_device *sdp = to_scsi_device(dev);
 	struct scsi_disk *sdkp = scsi_disk_get_from_dev(dev);
 
 	if (!sdkp)
                return -ENODEV;
 
 	if (sdkp->WCE)
-		ret = sd_sync_cache(sdp);
+		ret = sd_sync_cache(sdkp);
 	scsi_disk_put(sdkp);
 	return ret;
 }
@@ -928,12 +907,14 @@
 			sense_deferred = scsi_sense_is_deferred(&sshdr);
 	}
 #ifdef CONFIG_SCSI_LOGGING
-	SCSI_LOG_HLCOMPLETE(1, printk("sd_rw_intr: %s: res=0x%x\n", 
-				SCpnt->request->rq_disk->disk_name, result));
+	SCSI_LOG_HLCOMPLETE(1, scsi_print_result(SCpnt));
 	if (sense_valid) {
-		SCSI_LOG_HLCOMPLETE(1, printk("sd_rw_intr: sb[respc,sk,asc,"
-				"ascq]=%x,%x,%x,%x\n", sshdr.response_code,
-				sshdr.sense_key, sshdr.asc, sshdr.ascq));
+		SCSI_LOG_HLCOMPLETE(1, scmd_printk(KERN_INFO, SCpnt,
+						   "sd_rw_intr: sb[respc,sk,asc,"
+						   "ascq]=%x,%x,%x,%x\n",
+						   sshdr.response_code,
+						   sshdr.sense_key, sshdr.asc,
+						   sshdr.ascq));
 	}
 #endif
 	if (driver_byte(result) != DRIVER_SENSE &&
@@ -1025,7 +1006,7 @@
  * spinup disk - called only in sd_revalidate_disk()
  */
 static void
-sd_spinup_disk(struct scsi_disk *sdkp, char *diskname)
+sd_spinup_disk(struct scsi_disk *sdkp)
 {
 	unsigned char cmd[10];
 	unsigned long spintime_expire = 0;
@@ -1069,9 +1050,10 @@
 		if ((driver_byte(the_result) & DRIVER_SENSE) == 0) {
 			/* no sense, TUR either succeeded or failed
 			 * with a status error */
-			if(!spintime && !scsi_status_is_good(the_result))
-				printk(KERN_NOTICE "%s: Unit Not Ready, "
-				       "error = 0x%x\n", diskname, the_result);
+			if(!spintime && !scsi_status_is_good(the_result)) {
+				sd_printk(KERN_NOTICE, sdkp, "Unit Not Ready\n");
+				sd_print_result(sdkp, the_result);
+			}
 			break;
 		}
 					
@@ -1096,8 +1078,7 @@
 		 */
 		} else if (sense_valid && sshdr.sense_key == NOT_READY) {
 			if (!spintime) {
-				printk(KERN_NOTICE "%s: Spinning up disk...",
-				       diskname);
+				sd_printk(KERN_NOTICE, sdkp, "Spinning up disk...");
 				cmd[0] = START_STOP;
 				cmd[1] = 1;	/* Return immediately */
 				memset((void *) &cmd[2], 0, 8);
@@ -1130,9 +1111,8 @@
 			/* we don't understand the sense code, so it's
 			 * probably pointless to loop */
 			if(!spintime) {
-				printk(KERN_NOTICE "%s: Unit Not Ready, "
-					"sense:\n", diskname);
-				scsi_print_sense_hdr("", &sshdr);
+				sd_printk(KERN_NOTICE, sdkp, "Unit Not Ready\n");
+				sd_print_sense_hdr(sdkp, &sshdr);
 			}
 			break;
 		}
@@ -1151,8 +1131,7 @@
  * read disk capacity
  */
 static void
-sd_read_capacity(struct scsi_disk *sdkp, char *diskname,
-		 unsigned char *buffer)
+sd_read_capacity(struct scsi_disk *sdkp, unsigned char *buffer)
 {
 	unsigned char cmd[16];
 	int the_result, retries;
@@ -1191,18 +1170,12 @@
 	} while (the_result && retries);
 
 	if (the_result && !longrc) {
-		printk(KERN_NOTICE "%s : READ CAPACITY failed.\n"
-		       "%s : status=%x, message=%02x, host=%d, driver=%02x \n",
-		       diskname, diskname,
-		       status_byte(the_result),
-		       msg_byte(the_result),
-		       host_byte(the_result),
-		       driver_byte(the_result));
-
+		sd_printk(KERN_NOTICE, sdkp, "READ CAPACITY failed\n");
+		sd_print_result(sdkp, the_result);
 		if (driver_byte(the_result) & DRIVER_SENSE)
-			scsi_print_sense_hdr("sd", &sshdr);
+			sd_print_sense_hdr(sdkp, &sshdr);
 		else
-			printk("%s : sense not available. \n", diskname);
+			sd_printk(KERN_NOTICE, sdkp, "Sense not available.\n");
 
 		/* Set dirty bit for removable devices if not ready -
 		 * sometimes drives will not report this properly. */
@@ -1218,16 +1191,10 @@
 		return;
 	} else if (the_result && longrc) {
 		/* READ CAPACITY(16) has been failed */
-		printk(KERN_NOTICE "%s : READ CAPACITY(16) failed.\n"
-		       "%s : status=%x, message=%02x, host=%d, driver=%02x \n",
-		       diskname, diskname,
-		       status_byte(the_result),
-		       msg_byte(the_result),
-		       host_byte(the_result),
-		       driver_byte(the_result));
-		printk(KERN_NOTICE "%s : use 0xffffffff as device size\n",
-		       diskname);
-		
+		sd_printk(KERN_NOTICE, sdkp, "READ CAPACITY(16) failed\n");
+		sd_print_result(sdkp, the_result);
+		sd_printk(KERN_NOTICE, sdkp, "Use 0xffffffff as device size\n");
+
 		sdkp->capacity = 1 + (sector_t) 0xffffffff;		
 		goto got_data;
 	}	
@@ -1238,14 +1205,14 @@
 		if (buffer[0] == 0xff && buffer[1] == 0xff &&
 		    buffer[2] == 0xff && buffer[3] == 0xff) {
 			if(sizeof(sdkp->capacity) > 4) {
-				printk(KERN_NOTICE "%s : very big device. try to use"
-				       " READ CAPACITY(16).\n", diskname);
+				sd_printk(KERN_NOTICE, sdkp, "Very big device. "
+					  "Trying to use READ CAPACITY(16).\n");
 				longrc = 1;
 				goto repeat;
 			}
-			printk(KERN_ERR "%s: too big for this kernel.  Use a "
-			       "kernel compiled with support for large block "
-			       "devices.\n", diskname);
+			sd_printk(KERN_ERR, sdkp, "Too big for this kernel. Use "
+				  "a kernel compiled with support for large "
+				  "block devices.\n");
 			sdkp->capacity = 0;
 			goto got_data;
 		}
@@ -1284,8 +1251,8 @@
 got_data:
 	if (sector_size == 0) {
 		sector_size = 512;
-		printk(KERN_NOTICE "%s : sector size 0 reported, "
-		       "assuming 512.\n", diskname);
+		sd_printk(KERN_NOTICE, sdkp, "Sector size 0 reported, "
+			  "assuming 512.\n");
 	}
 
 	if (sector_size != 512 &&
@@ -1293,8 +1260,8 @@
 	    sector_size != 2048 &&
 	    sector_size != 4096 &&
 	    sector_size != 256) {
-		printk(KERN_NOTICE "%s : unsupported sector size "
-		       "%d.\n", diskname, sector_size);
+		sd_printk(KERN_NOTICE, sdkp, "Unsupported sector size %d.\n",
+			  sector_size);
 		/*
 		 * The user might want to re-format the drive with
 		 * a supported sectorsize.  Once this happens, it
@@ -1327,10 +1294,10 @@
 		mb -= sz - 974;
 		sector_div(mb, 1950);
 
-		printk(KERN_NOTICE "SCSI device %s: "
-		       "%llu %d-byte hdwr sectors (%llu MB)\n",
-		       diskname, (unsigned long long)sdkp->capacity,
-		       hard_sector, (unsigned long long)mb);
+		sd_printk(KERN_NOTICE, sdkp,
+			  "%llu %d-byte hardware sectors (%llu MB)\n",
+			  (unsigned long long)sdkp->capacity,
+			  hard_sector, (unsigned long long)mb);
 	}
 
 	/* Rescale capacity to 512-byte units */
@@ -1362,8 +1329,7 @@
  * called with buffer of length SD_BUF_SIZE
  */
 static void
-sd_read_write_protect_flag(struct scsi_disk *sdkp, char *diskname,
-			   unsigned char *buffer)
+sd_read_write_protect_flag(struct scsi_disk *sdkp, unsigned char *buffer)
 {
 	int res;
 	struct scsi_device *sdp = sdkp->device;
@@ -1371,7 +1337,7 @@
 
 	set_disk_ro(sdkp->disk, 0);
 	if (sdp->skip_ms_page_3f) {
-		printk(KERN_NOTICE "%s: assuming Write Enabled\n", diskname);
+		sd_printk(KERN_NOTICE, sdkp, "Assuming Write Enabled\n");
 		return;
 	}
 
@@ -1403,15 +1369,16 @@
 	}
 
 	if (!scsi_status_is_good(res)) {
-		printk(KERN_WARNING
-		       "%s: test WP failed, assume Write Enabled\n", diskname);
+		sd_printk(KERN_WARNING, sdkp,
+			  "Test WP failed, assume Write Enabled\n");
 	} else {
 		sdkp->write_prot = ((data.device_specific & 0x80) != 0);
 		set_disk_ro(sdkp->disk, sdkp->write_prot);
-		printk(KERN_NOTICE "%s: Write Protect is %s\n", diskname,
-		       sdkp->write_prot ? "on" : "off");
-		printk(KERN_DEBUG "%s: Mode Sense: %02x %02x %02x %02x\n",
-		       diskname, buffer[0], buffer[1], buffer[2], buffer[3]);
+		sd_printk(KERN_NOTICE, sdkp, "Write Protect is %s\n",
+			  sdkp->write_prot ? "on" : "off");
+		sd_printk(KERN_DEBUG, sdkp,
+			  "Mode Sense: %02x %02x %02x %02x\n",
+			  buffer[0], buffer[1], buffer[2], buffer[3]);
 	}
 }
 
@@ -1420,8 +1387,7 @@
  * called with buffer of length SD_BUF_SIZE
  */
 static void
-sd_read_cache_type(struct scsi_disk *sdkp, char *diskname,
-		   unsigned char *buffer)
+sd_read_cache_type(struct scsi_disk *sdkp, unsigned char *buffer)
 {
 	int len = 0, res;
 	struct scsi_device *sdp = sdkp->device;
@@ -1450,8 +1416,7 @@
 
 	if (!data.header_length) {
 		modepage = 6;
-		printk(KERN_ERR "%s: missing header in MODE_SENSE response\n",
-		       diskname);
+		sd_printk(KERN_ERR, sdkp, "Missing header in MODE_SENSE response\n");
 	}
 
 	/* that went OK, now ask for the proper length */
@@ -1478,13 +1443,12 @@
 		int offset = data.header_length + data.block_descriptor_length;
 
 		if (offset >= SD_BUF_SIZE - 2) {
-			printk(KERN_ERR "%s: malformed MODE SENSE response",
-				diskname);
+			sd_printk(KERN_ERR, sdkp, "Malformed MODE SENSE response\n");
 			goto defaults;
 		}
 
 		if ((buffer[offset] & 0x3f) != modepage) {
-			printk(KERN_ERR "%s: got wrong page\n", diskname);
+			sd_printk(KERN_ERR, sdkp, "Got wrong page\n");
 			goto defaults;
 		}
 
@@ -1498,14 +1462,13 @@
 
 		sdkp->DPOFUA = (data.device_specific & 0x10) != 0;
 		if (sdkp->DPOFUA && !sdkp->device->use_10_for_rw) {
-			printk(KERN_NOTICE "SCSI device %s: uses "
-			       "READ/WRITE(6), disabling FUA\n", diskname);
+			sd_printk(KERN_NOTICE, sdkp,
+				  "Uses READ/WRITE(6), disabling FUA\n");
 			sdkp->DPOFUA = 0;
 		}
 
-		printk(KERN_NOTICE "SCSI device %s: "
-		       "write cache: %s, read cache: %s, %s\n",
-		       diskname,
+		sd_printk(KERN_NOTICE, sdkp,
+		       "Write cache: %s, read cache: %s, %s\n",
 		       sdkp->WCE ? "enabled" : "disabled",
 		       sdkp->RCD ? "disabled" : "enabled",
 		       sdkp->DPOFUA ? "supports DPO and FUA"
@@ -1518,15 +1481,13 @@
 	if (scsi_sense_valid(&sshdr) &&
 	    sshdr.sense_key == ILLEGAL_REQUEST &&
 	    sshdr.asc == 0x24 && sshdr.ascq == 0x0)
-		printk(KERN_NOTICE "%s: cache data unavailable\n",
-		       diskname);	/* Invalid field in CDB */
+		/* Invalid field in CDB */
+		sd_printk(KERN_NOTICE, sdkp, "Cache data unavailable\n");
 	else
-		printk(KERN_ERR "%s: asking for cache data failed\n",
-		       diskname);
+		sd_printk(KERN_ERR, sdkp, "Asking for cache data failed\n");
 
 defaults:
-	printk(KERN_ERR "%s: assuming drive cache: write through\n",
-	       diskname);
+	sd_printk(KERN_ERR, sdkp, "Assuming drive cache: write through\n");
 	sdkp->WCE = 0;
 	sdkp->RCD = 0;
 	sdkp->DPOFUA = 0;
@@ -1544,7 +1505,8 @@
 	unsigned char *buffer;
 	unsigned ordered;
 
-	SCSI_LOG_HLQUEUE(3, printk("sd_revalidate_disk: disk=%s\n", disk->disk_name));
+	SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp,
+				      "sd_revalidate_disk\n"));
 
 	/*
 	 * If the device is offline, don't try and read capacity or any
@@ -1555,8 +1517,8 @@
 
 	buffer = kmalloc(SD_BUF_SIZE, GFP_KERNEL | __GFP_DMA);
 	if (!buffer) {
-		printk(KERN_WARNING "(sd_revalidate_disk:) Memory allocation "
-		       "failure.\n");
+		sd_printk(KERN_WARNING, sdkp, "sd_revalidate_disk: Memory "
+			  "allocation failure.\n");
 		goto out;
 	}
 
@@ -1568,16 +1530,16 @@
 	sdkp->WCE = 0;
 	sdkp->RCD = 0;
 
-	sd_spinup_disk(sdkp, disk->disk_name);
+	sd_spinup_disk(sdkp);
 
 	/*
 	 * Without media there is no reason to ask; moreover, some devices
 	 * react badly if we do.
 	 */
 	if (sdkp->media_present) {
-		sd_read_capacity(sdkp, disk->disk_name, buffer);
-		sd_read_write_protect_flag(sdkp, disk->disk_name, buffer);
-		sd_read_cache_type(sdkp, disk->disk_name, buffer);
+		sd_read_capacity(sdkp, buffer);
+		sd_read_write_protect_flag(sdkp, buffer);
+		sd_read_cache_type(sdkp, buffer);
 	}
 
 	/*
@@ -1709,8 +1671,8 @@
 	dev_set_drvdata(dev, sdkp);
 	add_disk(gd);
 
-	sdev_printk(KERN_NOTICE, sdp, "Attached scsi %sdisk %s\n",
-		    sdp->removable ? "removable " : "", gd->disk_name);
+	sd_printk(KERN_NOTICE, sdkp, "Attached SCSI %sdisk\n",
+		  sdp->removable ? "removable " : "");
 
 	return 0;
 
@@ -1774,6 +1736,31 @@
 	kfree(sdkp);
 }
 
+static int sd_start_stop_device(struct scsi_disk *sdkp, int start)
+{
+	unsigned char cmd[6] = { START_STOP };	/* START_VALID */
+	struct scsi_sense_hdr sshdr;
+	struct scsi_device *sdp = sdkp->device;
+	int res;
+
+	if (start)
+		cmd[4] |= 1;	/* START */
+
+	if (!scsi_device_online(sdp))
+		return -ENODEV;
+
+	res = scsi_execute_req(sdp, cmd, DMA_NONE, NULL, 0, &sshdr,
+			       SD_TIMEOUT, SD_MAX_RETRIES);
+	if (res) {
+		sd_printk(KERN_WARNING, sdkp, "START_STOP FAILED\n");
+		sd_print_result(sdkp, res);
+		if (driver_byte(res) & DRIVER_SENSE)
+			sd_print_sense_hdr(sdkp, &sshdr);
+	}
+
+	return res;
+}
+
 /*
  * Send a SYNCHRONIZE CACHE instruction down to the device through
  * the normal SCSI command structure.  Wait for the command to
@@ -1781,20 +1768,62 @@
  */
 static void sd_shutdown(struct device *dev)
 {
-	struct scsi_device *sdp = to_scsi_device(dev);
 	struct scsi_disk *sdkp = scsi_disk_get_from_dev(dev);
 
 	if (!sdkp)
 		return;         /* this can happen */
 
 	if (sdkp->WCE) {
-		printk(KERN_NOTICE "Synchronizing SCSI cache for disk %s: \n",
-				sdkp->disk->disk_name);
-		sd_sync_cache(sdp);
+		sd_printk(KERN_NOTICE, sdkp, "Synchronizing SCSI cache\n");
+		sd_sync_cache(sdkp);
 	}
+
+	if (system_state != SYSTEM_RESTART && sdkp->device->manage_start_stop) {
+		sd_printk(KERN_NOTICE, sdkp, "Stopping disk\n");
+		sd_start_stop_device(sdkp, 0);
+	}
+
 	scsi_disk_put(sdkp);
 }
 
+static int sd_suspend(struct device *dev, pm_message_t mesg)
+{
+	struct scsi_disk *sdkp = scsi_disk_get_from_dev(dev);
+	int ret;
+
+	if (!sdkp)
+		return 0;	/* this can happen */
+
+	if (sdkp->WCE) {
+		sd_printk(KERN_NOTICE, sdkp, "Synchronizing SCSI cache\n");
+		ret = sd_sync_cache(sdkp);
+		if (ret)
+			return ret;
+	}
+
+	if (mesg.event == PM_EVENT_SUSPEND &&
+	    sdkp->device->manage_start_stop) {
+		sd_printk(KERN_NOTICE, sdkp, "Stopping disk\n");
+		ret = sd_start_stop_device(sdkp, 0);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int sd_resume(struct device *dev)
+{
+	struct scsi_disk *sdkp = scsi_disk_get_from_dev(dev);
+
+	if (!sdkp->device->manage_start_stop)
+		return 0;
+
+	sd_printk(KERN_NOTICE, sdkp, "Starting disk\n");
+
+	return sd_start_stop_device(sdkp, 1);
+}
+
 /**
  *	init_sd - entry point for this driver (both when built in or when
  *	a module).
@@ -1852,3 +1881,19 @@
 
 module_init(init_sd);
 module_exit(exit_sd);
+
+static void sd_print_sense_hdr(struct scsi_disk *sdkp,
+			       struct scsi_sense_hdr *sshdr)
+{
+	sd_printk(KERN_INFO, sdkp, "");
+	scsi_show_sense_hdr(sshdr);
+	sd_printk(KERN_INFO, sdkp, "");
+	scsi_show_extd_sense(sshdr->asc, sshdr->ascq);
+}
+
+static void sd_print_result(struct scsi_disk *sdkp, int result)
+{
+	sd_printk(KERN_INFO, sdkp, "");
+	scsi_show_result(result);
+}
+
diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c
index 81e3bc7..570977c 100644
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -917,6 +917,8 @@
 			return result;
                 if (val < 0)
                         return -EINVAL;
+		val = min_t(int, val,
+				sdp->device->request_queue->max_sectors * 512);
 		if (val != sfp->reserve.bufflen) {
 			if (sg_res_in_use(sfp) || sfp->mmap_called)
 				return -EBUSY;
@@ -925,7 +927,8 @@
 		}
 		return 0;
 	case SG_GET_RESERVED_SIZE:
-		val = (int) sfp->reserve.bufflen;
+		val = min_t(int, sfp->reserve.bufflen,
+				sdp->device->request_queue->max_sectors * 512);
 		return put_user(val, ip);
 	case SG_SET_COMMAND_Q:
 		result = get_user(val, ip);
@@ -1061,6 +1064,9 @@
 		if (sdp->detached)
 			return -ENODEV;
 		return scsi_ioctl(sdp->device, cmd_in, p);
+	case BLKSECTGET:
+		return put_user(sdp->device->request_queue->max_sectors * 512,
+				ip);
 	default:
 		if (read_only)
 			return -EPERM;	/* don't know so take safe approach */
@@ -2339,6 +2345,7 @@
 {
 	Sg_fd *sfp;
 	unsigned long iflags;
+	int bufflen;
 
 	sfp = kzalloc(sizeof(*sfp), GFP_ATOMIC | __GFP_NOWARN);
 	if (!sfp)
@@ -2369,7 +2376,9 @@
 	if (unlikely(sg_big_buff != def_reserved_size))
 		sg_big_buff = def_reserved_size;
 
-	sg_build_reserve(sfp, sg_big_buff);
+	bufflen = min_t(int, sg_big_buff,
+			sdp->device->request_queue->max_sectors * 512);
+	sg_build_reserve(sfp, bufflen);
 	SCSI_LOG_TIMEOUT(3, printk("sg_add_sfp:   bufflen=%d, k_use_sg=%d\n",
 			   sfp->reserve.bufflen, sfp->reserve.k_use_sg));
 	return sfp;
diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c
index 1857d68..f9a52af7 100644
--- a/drivers/scsi/sr.c
+++ b/drivers/scsi/sr.c
@@ -62,6 +62,8 @@
 MODULE_DESCRIPTION("SCSI cdrom (sr) driver");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_CDROM_MAJOR);
+MODULE_ALIAS_SCSI_DEVICE(TYPE_ROM);
+MODULE_ALIAS_SCSI_DEVICE(TYPE_WORM);
 
 #define SR_DISKS	256
 
diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c
index 98d8411..55bfecc 100644
--- a/drivers/scsi/st.c
+++ b/drivers/scsi/st.c
@@ -89,6 +89,7 @@
 MODULE_DESCRIPTION("SCSI tape (st) driver");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS_CHARDEV_MAJOR(SCSI_TAPE_MAJOR);
+MODULE_ALIAS_SCSI_DEVICE(TYPE_TAPE);
 
 /* Set 'perm' (4th argument) to 0 to disable module_param's definition
  * of sysfs parameters (which module_param doesn't yet support).
diff --git a/include/scsi/iscsi_proto.h b/include/scsi/iscsi_proto.h
index 4a44278..8d1e4e8 100644
--- a/include/scsi/iscsi_proto.h
+++ b/include/scsi/iscsi_proto.h
@@ -588,7 +588,17 @@
 #define VALUE_MAXLEN		255
 #define TARGET_NAME_MAXLEN	VALUE_MAXLEN
 
-#define DEFAULT_MAX_RECV_DATA_SEGMENT_LENGTH	8192
+#define ISCSI_DEF_MAX_RECV_SEG_LEN		8192
+#define ISCSI_MIN_MAX_RECV_SEG_LEN		512
+#define ISCSI_MAX_MAX_RECV_SEG_LEN		16777215
+
+#define ISCSI_DEF_FIRST_BURST_LEN		65536
+#define ISCSI_MIN_FIRST_BURST_LEN		512
+#define ISCSI_MAX_FIRST_BURST_LEN		16777215
+
+#define ISCSI_DEF_MAX_BURST_LEN			262144
+#define ISCSI_MIN_MAX_BURST_LEN			512
+#define ISCSI_MAX_MAX_BURST_LEN			16777215
 
 /************************* RFC 3720 End *****************************/
 
diff --git a/include/scsi/scsi.h b/include/scsi/scsi.h
index 5c0e979..9f8f80a 100644
--- a/include/scsi/scsi.h
+++ b/include/scsi/scsi.h
@@ -203,6 +203,7 @@
 
 /*
  *  DEVICE TYPES
+ *  Please keep them in 0x%02x format for $MODALIAS to work
  */
 
 #define TYPE_DISK           0x00
diff --git a/include/scsi/scsi_cmnd.h b/include/scsi/scsi_cmnd.h
index d6948d0..a2e0c10 100644
--- a/include/scsi/scsi_cmnd.h
+++ b/include/scsi/scsi_cmnd.h
@@ -73,9 +73,6 @@
 	unsigned short use_sg;	/* Number of pieces of scatter-gather */
 	unsigned short sglist_len;	/* size of malloc'd scatter-gather list */
 
-	/* offset in cmd we are at (for multi-transfer tgt cmds) */
-	unsigned offset;
-
 	unsigned underflow;	/* Return error if less than
 				   this amount is transferred */
 
diff --git a/include/scsi/scsi_dbg.h b/include/scsi/scsi_dbg.h
index 3bbbfbe..5a43a4c 100644
--- a/include/scsi/scsi_dbg.h
+++ b/include/scsi/scsi_dbg.h
@@ -5,14 +5,16 @@
 struct scsi_sense_hdr;
 
 extern void scsi_print_command(struct scsi_cmnd *);
-extern void scsi_print_sense_hdr(const char *, struct scsi_sense_hdr *);
 extern void __scsi_print_command(unsigned char *);
-extern void scsi_print_sense(const char *, struct scsi_cmnd *);
+extern void scsi_show_extd_sense(unsigned char, unsigned char);
+extern void scsi_show_sense_hdr(struct scsi_sense_hdr *);
+extern void scsi_print_sense_hdr(const char *, struct scsi_sense_hdr *);
+extern void scsi_print_sense(char *, struct scsi_cmnd *);
 extern void __scsi_print_sense(const char *name,
 			       const unsigned char *sense_buffer,
 			       int sense_len);
-extern void scsi_print_driverbyte(int);
-extern void scsi_print_hostbyte(int);
+extern void scsi_show_result(int);
+extern void scsi_print_result(struct scsi_cmnd *);
 extern void scsi_print_status(unsigned char);
 extern const char *scsi_sense_key_string(unsigned char);
 extern const char *scsi_extd_sense_format(unsigned char, unsigned char);
diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h
index 9dd37e2..2f3c5b8b 100644
--- a/include/scsi/scsi_device.h
+++ b/include/scsi/scsi_device.h
@@ -5,6 +5,7 @@
 #include <linux/list.h>
 #include <linux/spinlock.h>
 #include <linux/workqueue.h>
+#include <linux/blkdev.h>
 #include <asm/atomic.h>
 
 struct request_queue;
@@ -119,6 +120,7 @@
 	unsigned use_192_bytes_for_3f:1; /* ask for 192 bytes from page 0x3f */
 	unsigned no_start_on_add:1;	/* do not issue start on add */
 	unsigned allow_restart:1; /* issue START_UNIT in error handler */
+	unsigned manage_start_stop:1;	/* Let HLD (sd) manage start/stop */
 	unsigned no_uld_attach:1; /* disable connecting to upper level drivers */
 	unsigned select_no_atn:1;
 	unsigned fix_capacity:1;	/* READ_CAPACITY is too high by 1 */
@@ -154,8 +156,11 @@
 #define sdev_printk(prefix, sdev, fmt, a...)	\
 	dev_printk(prefix, &(sdev)->sdev_gendev, fmt, ##a)
 
-#define scmd_printk(prefix, scmd, fmt, a...)	\
-	dev_printk(prefix, &(scmd)->device->sdev_gendev, fmt, ##a)
+#define scmd_printk(prefix, scmd, fmt, a...)				\
+        (scmd)->request->rq_disk ?					\
+	sdev_printk(prefix, (scmd)->device, "[%s] " fmt,		\
+		    (scmd)->request->rq_disk->disk_name, ##a) :		\
+	sdev_printk(prefix, (scmd)->device, fmt, ##a)
 
 enum scsi_target_state {
 	STARGET_RUNNING = 1,
@@ -353,4 +358,9 @@
 		return 0;
 	return sdev->inquiry[56] & 0x02;
 }
+
+#define MODULE_ALIAS_SCSI_DEVICE(type) \
+	MODULE_ALIAS("scsi:t-" __stringify(type) "*")
+#define SCSI_DEVICE_MODALIAS_FMT "scsi:t-0x%02x"
+
 #endif /* _SCSI_SCSI_DEVICE_H */
diff --git a/include/scsi/scsi_host.h b/include/scsi/scsi_host.h
index 7f1f411..68f461b 100644
--- a/include/scsi/scsi_host.h
+++ b/include/scsi/scsi_host.h
@@ -129,6 +129,11 @@
 	 * the LLD. When the driver is finished processing the command
 	 * the done callback is invoked.
 	 *
+	 * This is called to inform the LLD to transfer
+	 * cmd->request_bufflen bytes. The cmd->use_sg speciefies the
+	 * number of scatterlist entried in the command and
+	 * cmd->request_buffer contains the scatterlist.
+	 *
 	 * return values: see queuecommand
 	 *
 	 * If the LLD accepts the cmd, it should set the result to an
@@ -139,20 +144,6 @@
 	/* TODO: rename */
 	int (* transfer_response)(struct scsi_cmnd *,
 				  void (*done)(struct scsi_cmnd *));
-	/*
-	 * This is called to inform the LLD to transfer cmd->request_bufflen
-	 * bytes of the cmd at cmd->offset in the cmd. The cmd->use_sg
-	 * speciefies the number of scatterlist entried in the command
-	 * and cmd->request_buffer contains the scatterlist.
-	 *
-	 * If the command cannot be processed in one transfer_data call
-	 * becuase a scatterlist within the LLD's limits cannot be
-	 * created then transfer_data will be called multiple times.
-	 * It is initially called from process context, and later
-	 * calls are from the interrup context.
-	 */
-	int (* transfer_data)(struct scsi_cmnd *,
-			      void (*done)(struct scsi_cmnd *));
 
 	/* Used as callback for the completion of task management request. */
 	int (* tsk_mgmt_response)(u64 mid, int result);
@@ -335,6 +326,19 @@
 	int (*proc_info)(struct Scsi_Host *, char *, char **, off_t, int, int);
 
 	/*
+	 * This is an optional routine that allows the transport to become
+	 * involved when a scsi io timer fires. The return value tells the
+	 * timer routine how to finish the io timeout handling:
+	 * EH_HANDLED:		I fixed the error, please complete the command
+	 * EH_RESET_TIMER:	I need more time, reset the timer and
+	 *			begin counting again
+	 * EH_NOT_HANDLED	Begin normal error recovery
+	 *
+	 * Status: OPTIONAL
+	 */
+	enum scsi_eh_timer_return (* eh_timed_out)(struct scsi_cmnd *);
+
+	/*
 	 * suspend support
 	 */
 	int (*resume)(struct scsi_device *);
diff --git a/include/scsi/scsi_tgt_if.h b/include/scsi/scsi_tgt_if.h
index 07d6e77..4cf9dff 100644
--- a/include/scsi/scsi_tgt_if.h
+++ b/include/scsi/scsi_tgt_if.h
@@ -45,11 +45,13 @@
 		/* user-> kernel */
 		struct {
 			int host_no;
-			uint32_t len;
 			int result;
-			aligned_u64 uaddr;
-			uint8_t rw;
 			aligned_u64 tag;
+			aligned_u64 uaddr;
+			aligned_u64 sense_uaddr;
+			uint32_t len;
+			uint32_t sense_len;
+			uint8_t rw;
 		} cmd_rsp;
 		struct {
 			int host_no;
diff --git a/include/scsi/scsi_transport_fc.h b/include/scsi/scsi_transport_fc.h
index 798f7c7..1e79730 100644
--- a/include/scsi/scsi_transport_fc.h
+++ b/include/scsi/scsi_transport_fc.h
@@ -108,6 +108,8 @@
 #define FC_PORTSPEED_2GBIT		2
 #define FC_PORTSPEED_4GBIT		4
 #define FC_PORTSPEED_10GBIT		8
+#define FC_PORTSPEED_8GBIT		0x10
+#define FC_PORTSPEED_16GBIT		0x20
 #define FC_PORTSPEED_NOT_NEGOTIATED	(1 << 15) /* Speed not established */
 
 /*
diff --git a/include/scsi/sd.h b/include/scsi/sd.h
new file mode 100644
index 0000000..5261488
--- /dev/null
+++ b/include/scsi/sd.h
@@ -0,0 +1,72 @@
+#ifndef _SCSI_DISK_H
+#define _SCSI_DISK_H
+
+/*
+ * More than enough for everybody ;)  The huge number of majors
+ * is a leftover from 16bit dev_t days, we don't really need that
+ * much numberspace.
+ */
+#define SD_MAJORS	16
+
+/*
+ * This is limited by the naming scheme enforced in sd_probe,
+ * add another character to it if you really need more disks.
+ */
+#define SD_MAX_DISKS	(((26 * 26) + 26 + 1) * 26)
+
+/*
+ * Time out in seconds for disks and Magneto-opticals (which are slower).
+ */
+#define SD_TIMEOUT		(30 * HZ)
+#define SD_MOD_TIMEOUT		(75 * HZ)
+
+/*
+ * Number of allowed retries
+ */
+#define SD_MAX_RETRIES		5
+#define SD_PASSTHROUGH_RETRIES	1
+
+/*
+ * Size of the initial data buffer for mode and read capacity data
+ */
+#define SD_BUF_SIZE		512
+
+struct scsi_disk {
+	struct scsi_driver *driver;	/* always &sd_template */
+	struct scsi_device *device;
+	struct class_device cdev;
+	struct gendisk	*disk;
+	unsigned int	openers;	/* protected by BKL for now, yuck */
+	sector_t	capacity;	/* size in 512-byte sectors */
+	u32		index;
+	u8		media_present;
+	u8		write_prot;
+	unsigned	WCE : 1;	/* state of disk WCE bit */
+	unsigned	RCD : 1;	/* state of disk RCD bit, unused */
+	unsigned	DPOFUA : 1;	/* state of disk DPOFUA bit */
+};
+#define to_scsi_disk(obj) container_of(obj,struct scsi_disk,cdev)
+
+static int  sd_revalidate_disk(struct gendisk *disk);
+static void sd_rw_intr(struct scsi_cmnd * SCpnt);
+static int  sd_probe(struct device *);
+static int  sd_remove(struct device *);
+static void sd_shutdown(struct device *dev);
+static int sd_suspend(struct device *dev, pm_message_t state);
+static int sd_resume(struct device *dev);
+static void sd_rescan(struct device *);
+static int  sd_init_command(struct scsi_cmnd *);
+static int  sd_issue_flush(struct device *, sector_t *);
+static void sd_prepare_flush(request_queue_t *, struct request *);
+static void sd_read_capacity(struct scsi_disk *sdkp, unsigned char *buffer);
+static void scsi_disk_release(struct class_device *cdev);
+static void sd_print_sense_hdr(struct scsi_disk *, struct scsi_sense_hdr *);
+static void sd_print_result(struct scsi_disk *, int);
+
+#define sd_printk(prefix, sdsk, fmt, a...)				\
+        (sdsk)->disk ?							\
+	sdev_printk(prefix, (sdsk)->device, "[%s] " fmt,		\
+		    (sdsk)->disk->disk_name, ##a) :			\
+	sdev_printk(prefix, (sdsk)->device, fmt, ##a)
+
+#endif /* _SCSI_DISK_H */