| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (c) 2019-2020, The Linux Foundation. All rights reserved. |
| * Copyright (c) 2023, Linaro Ltd |
| */ |
| #include <linux/auxiliary_bus.h> |
| #include <linux/module.h> |
| #include <linux/mutex.h> |
| #include <linux/of_device.h> |
| #include <linux/property.h> |
| #include <linux/soc/qcom/pdr.h> |
| #include <linux/usb/typec_mux.h> |
| #include <linux/gpio/consumer.h> |
| #include <linux/soc/qcom/pmic_glink.h> |
| #include "ucsi.h" |
| |
| #define PMIC_GLINK_MAX_PORTS 3 |
| |
| #define UCSI_BUF_SIZE 48 |
| |
| #define MSG_TYPE_REQ_RESP 1 |
| #define UCSI_BUF_SIZE 48 |
| |
| #define UC_NOTIFY_RECEIVER_UCSI 0x0 |
| #define UC_UCSI_READ_BUF_REQ 0x11 |
| #define UC_UCSI_WRITE_BUF_REQ 0x12 |
| #define UC_UCSI_USBC_NOTIFY_IND 0x13 |
| |
| struct ucsi_read_buf_req_msg { |
| struct pmic_glink_hdr hdr; |
| }; |
| |
| struct ucsi_read_buf_resp_msg { |
| struct pmic_glink_hdr hdr; |
| u8 buf[UCSI_BUF_SIZE]; |
| u32 ret_code; |
| }; |
| |
| struct ucsi_write_buf_req_msg { |
| struct pmic_glink_hdr hdr; |
| u8 buf[UCSI_BUF_SIZE]; |
| u32 reserved; |
| }; |
| |
| struct ucsi_write_buf_resp_msg { |
| struct pmic_glink_hdr hdr; |
| u32 ret_code; |
| }; |
| |
| struct ucsi_notify_ind_msg { |
| struct pmic_glink_hdr hdr; |
| u32 notification; |
| u32 receiver; |
| u32 reserved; |
| }; |
| |
| struct pmic_glink_ucsi { |
| struct device *dev; |
| |
| struct gpio_desc *port_orientation[PMIC_GLINK_MAX_PORTS]; |
| |
| struct pmic_glink_client *client; |
| |
| struct ucsi *ucsi; |
| struct completion read_ack; |
| struct completion write_ack; |
| struct mutex lock; /* protects concurrent access to PMIC Glink interface */ |
| |
| struct work_struct notify_work; |
| struct work_struct register_work; |
| |
| u8 read_buf[UCSI_BUF_SIZE]; |
| }; |
| |
| static int pmic_glink_ucsi_read(struct ucsi *__ucsi, unsigned int offset, |
| void *val, size_t val_len) |
| { |
| struct pmic_glink_ucsi *ucsi = ucsi_get_drvdata(__ucsi); |
| struct ucsi_read_buf_req_msg req = {}; |
| unsigned long left; |
| int ret; |
| |
| req.hdr.owner = PMIC_GLINK_OWNER_USBC; |
| req.hdr.type = MSG_TYPE_REQ_RESP; |
| req.hdr.opcode = UC_UCSI_READ_BUF_REQ; |
| |
| mutex_lock(&ucsi->lock); |
| memset(ucsi->read_buf, 0, sizeof(ucsi->read_buf)); |
| reinit_completion(&ucsi->read_ack); |
| |
| ret = pmic_glink_send(ucsi->client, &req, sizeof(req)); |
| if (ret < 0) { |
| dev_err(ucsi->dev, "failed to send UCSI read request: %d\n", ret); |
| goto out_unlock; |
| } |
| |
| left = wait_for_completion_timeout(&ucsi->read_ack, 5 * HZ); |
| if (!left) { |
| dev_err(ucsi->dev, "timeout waiting for UCSI read response\n"); |
| ret = -ETIMEDOUT; |
| goto out_unlock; |
| } |
| |
| memcpy(val, &ucsi->read_buf[offset], val_len); |
| ret = 0; |
| |
| out_unlock: |
| mutex_unlock(&ucsi->lock); |
| |
| return ret; |
| } |
| |
| static int pmic_glink_ucsi_read_version(struct ucsi *ucsi, u16 *version) |
| { |
| return pmic_glink_ucsi_read(ucsi, UCSI_VERSION, version, sizeof(*version)); |
| } |
| |
| static int pmic_glink_ucsi_read_cci(struct ucsi *ucsi, u32 *cci) |
| { |
| return pmic_glink_ucsi_read(ucsi, UCSI_CCI, cci, sizeof(*cci)); |
| } |
| |
| static int pmic_glink_ucsi_read_message_in(struct ucsi *ucsi, void *val, size_t val_len) |
| { |
| return pmic_glink_ucsi_read(ucsi, UCSI_MESSAGE_IN, val, val_len); |
| } |
| |
| static int pmic_glink_ucsi_locked_write(struct pmic_glink_ucsi *ucsi, unsigned int offset, |
| const void *val, size_t val_len) |
| { |
| struct ucsi_write_buf_req_msg req = {}; |
| unsigned long left; |
| int ret; |
| |
| req.hdr.owner = PMIC_GLINK_OWNER_USBC; |
| req.hdr.type = MSG_TYPE_REQ_RESP; |
| req.hdr.opcode = UC_UCSI_WRITE_BUF_REQ; |
| memcpy(&req.buf[offset], val, val_len); |
| |
| reinit_completion(&ucsi->write_ack); |
| |
| ret = pmic_glink_send(ucsi->client, &req, sizeof(req)); |
| if (ret < 0) { |
| dev_err(ucsi->dev, "failed to send UCSI write request: %d\n", ret); |
| return ret; |
| } |
| |
| left = wait_for_completion_timeout(&ucsi->write_ack, 5 * HZ); |
| if (!left) { |
| dev_err(ucsi->dev, "timeout waiting for UCSI write response\n"); |
| return -ETIMEDOUT; |
| } |
| |
| return 0; |
| } |
| |
| static int pmic_glink_ucsi_async_control(struct ucsi *__ucsi, u64 command) |
| { |
| struct pmic_glink_ucsi *ucsi = ucsi_get_drvdata(__ucsi); |
| int ret; |
| |
| mutex_lock(&ucsi->lock); |
| ret = pmic_glink_ucsi_locked_write(ucsi, UCSI_CONTROL, &command, sizeof(command)); |
| mutex_unlock(&ucsi->lock); |
| |
| return ret; |
| } |
| |
| static void pmic_glink_ucsi_update_connector(struct ucsi_connector *con) |
| { |
| struct pmic_glink_ucsi *ucsi = ucsi_get_drvdata(con->ucsi); |
| int i; |
| |
| for (i = 0; i < PMIC_GLINK_MAX_PORTS; i++) { |
| if (ucsi->port_orientation[i]) |
| con->typec_cap.orientation_aware = true; |
| } |
| } |
| |
| static void pmic_glink_ucsi_connector_status(struct ucsi_connector *con) |
| { |
| struct pmic_glink_ucsi *ucsi = ucsi_get_drvdata(con->ucsi); |
| int orientation; |
| |
| if (con->num >= PMIC_GLINK_MAX_PORTS || |
| !ucsi->port_orientation[con->num - 1]) |
| return; |
| |
| orientation = gpiod_get_value(ucsi->port_orientation[con->num - 1]); |
| if (orientation >= 0) { |
| typec_set_orientation(con->port, |
| orientation ? |
| TYPEC_ORIENTATION_REVERSE : |
| TYPEC_ORIENTATION_NORMAL); |
| } |
| } |
| |
| static const struct ucsi_operations pmic_glink_ucsi_ops = { |
| .read_version = pmic_glink_ucsi_read_version, |
| .read_cci = pmic_glink_ucsi_read_cci, |
| .read_message_in = pmic_glink_ucsi_read_message_in, |
| .sync_control = ucsi_sync_control_common, |
| .async_control = pmic_glink_ucsi_async_control, |
| .update_connector = pmic_glink_ucsi_update_connector, |
| .connector_status = pmic_glink_ucsi_connector_status, |
| }; |
| |
| static void pmic_glink_ucsi_read_ack(struct pmic_glink_ucsi *ucsi, const void *data, int len) |
| { |
| const struct ucsi_read_buf_resp_msg *resp = data; |
| |
| if (resp->ret_code) |
| return; |
| |
| memcpy(ucsi->read_buf, resp->buf, UCSI_BUF_SIZE); |
| complete(&ucsi->read_ack); |
| } |
| |
| static void pmic_glink_ucsi_write_ack(struct pmic_glink_ucsi *ucsi, const void *data, int len) |
| { |
| const struct ucsi_write_buf_resp_msg *resp = data; |
| |
| if (resp->ret_code) |
| return; |
| |
| complete(&ucsi->write_ack); |
| } |
| |
| static void pmic_glink_ucsi_notify(struct work_struct *work) |
| { |
| struct pmic_glink_ucsi *ucsi = container_of(work, struct pmic_glink_ucsi, notify_work); |
| u32 cci; |
| int ret; |
| |
| ret = pmic_glink_ucsi_read(ucsi->ucsi, UCSI_CCI, &cci, sizeof(cci)); |
| if (ret) { |
| dev_err(ucsi->dev, "failed to read CCI on notification\n"); |
| return; |
| } |
| |
| ucsi_notify_common(ucsi->ucsi, cci); |
| } |
| |
| static void pmic_glink_ucsi_register(struct work_struct *work) |
| { |
| struct pmic_glink_ucsi *ucsi = container_of(work, struct pmic_glink_ucsi, register_work); |
| |
| ucsi_register(ucsi->ucsi); |
| } |
| |
| static void pmic_glink_ucsi_callback(const void *data, size_t len, void *priv) |
| { |
| struct pmic_glink_ucsi *ucsi = priv; |
| const struct pmic_glink_hdr *hdr = data; |
| |
| switch (le32_to_cpu(hdr->opcode)) { |
| case UC_UCSI_READ_BUF_REQ: |
| pmic_glink_ucsi_read_ack(ucsi, data, len); |
| break; |
| case UC_UCSI_WRITE_BUF_REQ: |
| pmic_glink_ucsi_write_ack(ucsi, data, len); |
| break; |
| case UC_UCSI_USBC_NOTIFY_IND: |
| schedule_work(&ucsi->notify_work); |
| break; |
| }; |
| } |
| |
| static void pmic_glink_ucsi_pdr_notify(void *priv, int state) |
| { |
| struct pmic_glink_ucsi *ucsi = priv; |
| |
| if (state == SERVREG_SERVICE_STATE_UP) |
| schedule_work(&ucsi->register_work); |
| else if (state == SERVREG_SERVICE_STATE_DOWN) |
| ucsi_unregister(ucsi->ucsi); |
| } |
| |
| static void pmic_glink_ucsi_destroy(void *data) |
| { |
| struct pmic_glink_ucsi *ucsi = data; |
| |
| /* Protect to make sure we're not in a middle of a transaction from a glink callback */ |
| mutex_lock(&ucsi->lock); |
| ucsi_destroy(ucsi->ucsi); |
| mutex_unlock(&ucsi->lock); |
| } |
| |
| static unsigned long quirk_sc8180x = UCSI_NO_PARTNER_PDOS; |
| static unsigned long quirk_sc8280xp = UCSI_NO_PARTNER_PDOS | UCSI_DELAY_DEVICE_PDOS; |
| static unsigned long quirk_sm8450 = UCSI_DELAY_DEVICE_PDOS; |
| |
| static const struct of_device_id pmic_glink_ucsi_of_quirks[] = { |
| { .compatible = "qcom,qcm6490-pmic-glink", .data = &quirk_sc8280xp, }, |
| { .compatible = "qcom,sc8180x-pmic-glink", .data = &quirk_sc8180x, }, |
| { .compatible = "qcom,sc8280xp-pmic-glink", .data = &quirk_sc8280xp, }, |
| { .compatible = "qcom,sm8350-pmic-glink", .data = &quirk_sc8180x, }, |
| { .compatible = "qcom,sm8450-pmic-glink", .data = &quirk_sm8450, }, |
| { .compatible = "qcom,sm8550-pmic-glink", .data = &quirk_sm8450, }, |
| {} |
| }; |
| |
| static int pmic_glink_ucsi_probe(struct auxiliary_device *adev, |
| const struct auxiliary_device_id *id) |
| { |
| struct pmic_glink_ucsi *ucsi; |
| struct device *dev = &adev->dev; |
| const struct of_device_id *match; |
| struct fwnode_handle *fwnode; |
| int ret; |
| |
| ucsi = devm_kzalloc(dev, sizeof(*ucsi), GFP_KERNEL); |
| if (!ucsi) |
| return -ENOMEM; |
| |
| ucsi->dev = dev; |
| dev_set_drvdata(dev, ucsi); |
| |
| INIT_WORK(&ucsi->notify_work, pmic_glink_ucsi_notify); |
| INIT_WORK(&ucsi->register_work, pmic_glink_ucsi_register); |
| init_completion(&ucsi->read_ack); |
| init_completion(&ucsi->write_ack); |
| mutex_init(&ucsi->lock); |
| |
| ucsi->ucsi = ucsi_create(dev, &pmic_glink_ucsi_ops); |
| if (IS_ERR(ucsi->ucsi)) |
| return PTR_ERR(ucsi->ucsi); |
| |
| /* Make sure we destroy *after* pmic_glink unregister */ |
| ret = devm_add_action_or_reset(dev, pmic_glink_ucsi_destroy, ucsi); |
| if (ret) |
| return ret; |
| |
| match = of_match_device(pmic_glink_ucsi_of_quirks, dev->parent); |
| if (match) |
| ucsi->ucsi->quirks = *(unsigned long *)match->data; |
| |
| ucsi_set_drvdata(ucsi->ucsi, ucsi); |
| |
| device_for_each_child_node(dev, fwnode) { |
| struct gpio_desc *desc; |
| u32 port; |
| |
| ret = fwnode_property_read_u32(fwnode, "reg", &port); |
| if (ret < 0) { |
| dev_err(dev, "missing reg property of %pOFn\n", fwnode); |
| fwnode_handle_put(fwnode); |
| return ret; |
| } |
| |
| if (port >= PMIC_GLINK_MAX_PORTS) { |
| dev_warn(dev, "invalid connector number, ignoring\n"); |
| continue; |
| } |
| |
| desc = devm_gpiod_get_index_optional(&adev->dev, "orientation", port, GPIOD_IN); |
| |
| /* If GPIO isn't found, continue */ |
| if (!desc) |
| continue; |
| |
| if (IS_ERR(desc)) { |
| fwnode_handle_put(fwnode); |
| return dev_err_probe(dev, PTR_ERR(desc), |
| "unable to acquire orientation gpio\n"); |
| } |
| ucsi->port_orientation[port] = desc; |
| } |
| |
| ucsi->client = devm_pmic_glink_register_client(dev, |
| PMIC_GLINK_OWNER_USBC, |
| pmic_glink_ucsi_callback, |
| pmic_glink_ucsi_pdr_notify, |
| ucsi); |
| return PTR_ERR_OR_ZERO(ucsi->client); |
| } |
| |
| static void pmic_glink_ucsi_remove(struct auxiliary_device *adev) |
| { |
| struct pmic_glink_ucsi *ucsi = dev_get_drvdata(&adev->dev); |
| |
| /* Unregister first to stop having read & writes */ |
| ucsi_unregister(ucsi->ucsi); |
| } |
| |
| static const struct auxiliary_device_id pmic_glink_ucsi_id_table[] = { |
| { .name = "pmic_glink.ucsi", }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(auxiliary, pmic_glink_ucsi_id_table); |
| |
| static struct auxiliary_driver pmic_glink_ucsi_driver = { |
| .name = "pmic_glink_ucsi", |
| .probe = pmic_glink_ucsi_probe, |
| .remove = pmic_glink_ucsi_remove, |
| .id_table = pmic_glink_ucsi_id_table, |
| }; |
| |
| module_auxiliary_driver(pmic_glink_ucsi_driver); |
| |
| MODULE_DESCRIPTION("Qualcomm PMIC GLINK UCSI driver"); |
| MODULE_LICENSE("GPL"); |