Merge tag 'socfpga_fixes_for_3.18' of git://git.rocketboards.org/linux-socfpga-next into fixes
Merge "SOCFPGA fixes for 3.18" from Dinh Nguyen:
These patches fixes an SMP and SDMMC driver hang during boot up on the
SOCFPGA platform.
Patch "arm: socfpga: fix fetching cpu1start_addr for SMP" fixes the SMP
trampoline code in order for CPU1 to correctly fetch it's cpu1start_addr.
Patch "ARM: dts: socfpga: rename gpio nodes" renames that GPIO node in order
to allow a standard way of specifying status="okay" in the board DTS file.
Patch "ARM: dts: socfpga: Fix SD card detect" fixes a SDMMC driver hang
during boot. The reason for the hang was the deferred probe of the SDMMC
driver was waiting for the GPIO resource that would never come.
Patch "ARM: dts: socfpga: Add a 3.3V fixed regulator node" adds a fixed
regulator node for the SDMMC driver to use.
* tag 'socfpga_fixes_for_3.18' of git://git.rocketboards.org/linux-socfpga-next:
ARM: dts: socfpga: Add a 3.3V fixed regulator node
ARM: dts: socfpga: Fix SD card detect
ARM: dts: socfpga: rename gpio nodes
arm: socfpga: fix fetching cpu1start_addr for SMP
Signed-off-by: Olof Johansson <olof@lixom.net>
diff --git a/MAINTAINERS b/MAINTAINERS
index a20df9b..71fdbd4 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1749,6 +1749,13 @@
S: Supported
F: drivers/spi/spi-atmel.*
+ATMEL SSC DRIVER
+M: Bo Shen <voice.shen@atmel.com>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S: Supported
+F: drivers/misc/atmel-ssc.c
+F: include/linux/atmel-ssc.h
+
ATMEL Timer Counter (TC) AND CLOCKSOURCE DRIVERS
M: Nicolas Ferre <nicolas.ferre@atmel.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
index d68b3c4..51416c7d 100644
--- a/arch/arm/boot/dts/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -122,9 +122,10 @@
interrupts-extended = <&pmc AT91_PMC_LOCKB>;
clocks = <&main>;
reg = <1>;
- atmel,clk-input-range = <1000000 5000000>;
+ atmel,clk-input-range = <1000000 32000000>;
#atmel,pll-clk-output-range-cells = <4>;
- atmel,pll-clk-output-ranges = <70000000 130000000 1 1>;
+ atmel,pll-clk-output-ranges = <80000000 200000000 0 1>,
+ <190000000 240000000 2 1>;
};
mck: masterck {
diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi
index 24036c4..ce2ef5b 100644
--- a/arch/arm/boot/dts/zynq-7000.dtsi
+++ b/arch/arm/boot/dts/zynq-7000.dtsi
@@ -30,7 +30,6 @@
/* kHz uV */
666667 1000000
333334 1000000
- 222223 1000000
>;
};
@@ -65,7 +64,7 @@
interrupt-parent = <&intc>;
ranges;
- adc@f8007100 {
+ adc: adc@f8007100 {
compatible = "xlnx,zynq-xadc-1.00.a";
reg = <0xf8007100 0x20>;
interrupts = <0 7 4>;
@@ -137,7 +136,7 @@
<0xF8F00100 0x100>;
};
- L2: cache-controller {
+ L2: cache-controller@f8f02000 {
compatible = "arm,pl310-cache";
reg = <0xF8F02000 0x1000>;
arm,data-latency = <3 2 2>;
@@ -146,10 +145,10 @@
cache-level = <2>;
};
- memory-controller@f8006000 {
+ mc: memory-controller@f8006000 {
compatible = "xlnx,zynq-ddrc-a05";
reg = <0xf8006000 0x1000>;
- } ;
+ };
uart0: serial@e0000000 {
compatible = "xlnx,xuartps", "cdns,uart-r1p8";
@@ -195,7 +194,7 @@
gem0: ethernet@e000b000 {
compatible = "cdns,gem";
- reg = <0xe000b000 0x4000>;
+ reg = <0xe000b000 0x1000>;
status = "disabled";
interrupts = <0 22 4>;
clocks = <&clkc 30>, <&clkc 30>, <&clkc 13>;
@@ -206,7 +205,7 @@
gem1: ethernet@e000c000 {
compatible = "cdns,gem";
- reg = <0xe000c000 0x4000>;
+ reg = <0xe000c000 0x1000>;
status = "disabled";
interrupts = <0 45 4>;
clocks = <&clkc 31>, <&clkc 31>, <&clkc 14>;
@@ -315,5 +314,16 @@
reg = <0xf8f00600 0x20>;
clocks = <&clkc 4>;
};
+
+ watchdog0: watchdog@f8005000 {
+ clocks = <&clkc 45>;
+ compatible = "xlnx,zynq-wdt-r1p2";
+ device_type = "watchdog";
+ interrupt-parent = <&intc>;
+ interrupts = <0 9 1>;
+ reg = <0xf8005000 0x1000>;
+ reset = <0>;
+ timeout-sec = <10>;
+ };
};
};
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 491b7d5..709ecc9 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -353,6 +353,7 @@
CONFIG_MMC_SUNXI=y
CONFIG_MMC_DW=y
CONFIG_MMC_DW_EXYNOS=y
+CONFIG_MMC_DW_ROCKCHIP=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
diff --git a/arch/arm/configs/sunxi_defconfig b/arch/arm/configs/sunxi_defconfig
index 8470453..f7ac037 100644
--- a/arch/arm/configs/sunxi_defconfig
+++ b/arch/arm/configs/sunxi_defconfig
@@ -76,6 +76,7 @@
CONFIG_SUNXI_WATCHDOG=y
CONFIG_MFD_AXP20X=y
CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_GPIO=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
diff --git a/drivers/power/reset/at91-reset.c b/drivers/power/reset/at91-reset.c
index 3611806..3cb3669 100644
--- a/drivers/power/reset/at91-reset.c
+++ b/drivers/power/reset/at91-reset.c
@@ -100,11 +100,11 @@
/* Disable SDRAM0 accesses */
"1: str %3, [%0, #" __stringify(AT91_DDRSDRC_RTR) "]\n\t"
/* Power down SDRAM0 */
- " str %4, [%0, #" __stringify(AT91_DDRSDRC_RTR) "]\n\t"
+ " str %4, [%0, #" __stringify(AT91_DDRSDRC_LPR) "]\n\t"
/* Disable SDRAM1 accesses */
" strne %3, [%1, #" __stringify(AT91_DDRSDRC_RTR) "]\n\t"
/* Power down SDRAM1 */
- " strne %4, [%1, #" __stringify(AT91_DDRSDRC_RTR) "]\n\t"
+ " strne %4, [%1, #" __stringify(AT91_DDRSDRC_LPR) "]\n\t"
/* Reset CPU */
" str %5, [%2, #" __stringify(AT91_RSTC_CR) "]\n\t"
