Merge branch 'master' of git://git.infradead.org/users/cbou/linux-cns3xxx into devel-stable
diff --git a/arch/arm/mach-cns3xxx/cns3420vb.c b/arch/arm/mach-cns3xxx/cns3420vb.c
index 90fe9ab..08e5c87 100644
--- a/arch/arm/mach-cns3xxx/cns3420vb.c
+++ b/arch/arm/mach-cns3xxx/cns3420vb.c
@@ -17,6 +17,7 @@
 #include <linux/kernel.h>
 #include <linux/compiler.h>
 #include <linux/io.h>
+#include <linux/dma-mapping.h>
 #include <linux/serial_core.h>
 #include <linux/serial_8250.h>
 #include <linux/platform_device.h>
@@ -108,10 +109,63 @@
 }
 
 /*
+ * USB
+ */
+static struct resource cns3xxx_usb_ehci_resources[] = {
+	[0] = {
+		.start = CNS3XXX_USB_BASE,
+		.end   = CNS3XXX_USB_BASE + SZ_16M - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_CNS3XXX_USB_EHCI,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static u64 cns3xxx_usb_ehci_dma_mask = DMA_BIT_MASK(32);
+
+static struct platform_device cns3xxx_usb_ehci_device = {
+	.name          = "cns3xxx-ehci",
+	.num_resources = ARRAY_SIZE(cns3xxx_usb_ehci_resources),
+	.resource      = cns3xxx_usb_ehci_resources,
+	.dev           = {
+		.dma_mask          = &cns3xxx_usb_ehci_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+};
+
+static struct resource cns3xxx_usb_ohci_resources[] = {
+	[0] = {
+		.start = CNS3XXX_USB_OHCI_BASE,
+		.end   = CNS3XXX_USB_OHCI_BASE + SZ_16M - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_CNS3XXX_USB_OHCI,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static u64 cns3xxx_usb_ohci_dma_mask = DMA_BIT_MASK(32);
+
+static struct platform_device cns3xxx_usb_ohci_device = {
+	.name          = "cns3xxx-ohci",
+	.num_resources = ARRAY_SIZE(cns3xxx_usb_ohci_resources),
+	.resource      = cns3xxx_usb_ohci_resources,
+	.dev           = {
+		.dma_mask          = &cns3xxx_usb_ohci_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+};
+
+/*
  * Initialization
  */
 static struct platform_device *cns3420_pdevs[] __initdata = {
 	&cns3420_nor_pdev,
+	&cns3xxx_usb_ehci_device,
+	&cns3xxx_usb_ohci_device,
 };
 
 static void __init cns3420_init(void)
diff --git a/arch/arm/mach-cns3xxx/core.h b/arch/arm/mach-cns3xxx/core.h
index 6b33ec1..73898a7 100644
--- a/arch/arm/mach-cns3xxx/core.h
+++ b/arch/arm/mach-cns3xxx/core.h
@@ -17,7 +17,5 @@
 void __init cns3xxx_map_io(void);
 void __init cns3xxx_init_irq(void);
 void cns3xxx_power_off(void);
-void cns3xxx_pwr_power_up(unsigned int block);
-void cns3xxx_pwr_power_down(unsigned int block);
 
 #endif /* __CNS3XXX_CORE_H */
diff --git a/arch/arm/mach-cns3xxx/devices.c b/arch/arm/mach-cns3xxx/devices.c
index 50b4d31..79d1fb0 100644
--- a/arch/arm/mach-cns3xxx/devices.c
+++ b/arch/arm/mach-cns3xxx/devices.c
@@ -18,6 +18,7 @@
 #include <linux/platform_device.h>
 #include <mach/cns3xxx.h>
 #include <mach/irqs.h>
+#include <mach/pm.h>
 #include "core.h"
 #include "devices.h"
 
diff --git a/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h b/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h
index 6dbce13..191c8e5 100644
--- a/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h
+++ b/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h
@@ -165,7 +165,6 @@
 #define CNS3XXX_USBOTG_BASE_VIRT		0xFFF15000
 
 #define CNS3XXX_USB_BASE			0x82000000	/* USB Host Control */
-#define CNS3XXX_USB_BASE_VIRT			0xFFF16000
 
 #define CNS3XXX_SATA2_BASE			0x83000000	/* SATA */
 #define CNS3XXX_SATA2_SIZE			SZ_16M
@@ -184,7 +183,6 @@
 #define CNS3XXX_2DG_BASE_VIRT			0xFFF1B000
 
 #define CNS3XXX_USB_OHCI_BASE			0x88000000	/* USB OHCI */
-#define CNS3XXX_USB_OHCI_BASE_VIRT		0xFFF1C000
 
 #define CNS3XXX_L2C_BASE			0x92000000	/* L2 Cache Control */
 #define CNS3XXX_L2C_BASE_VIRT			0xFFF27000
diff --git a/arch/arm/mach-cns3xxx/include/mach/pm.h b/arch/arm/mach-cns3xxx/include/mach/pm.h
new file mode 100644
index 0000000..6eae7f7
--- /dev/null
+++ b/arch/arm/mach-cns3xxx/include/mach/pm.h
@@ -0,0 +1,23 @@
+/*
+ * Copyright 2000 Deep Blue Solutions Ltd
+ * Copyright 2004 ARM Limited
+ * Copyright 2008 Cavium Networks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __CNS3XXX_PM_H
+#define __CNS3XXX_PM_H
+
+#include <asm/atomic.h>
+
+void cns3xxx_pwr_clk_en(unsigned int block);
+void cns3xxx_pwr_clk_dis(unsigned int block);
+void cns3xxx_pwr_power_up(unsigned int block);
+void cns3xxx_pwr_power_down(unsigned int block);
+
+extern atomic_t usb_pwr_ref;
+
+#endif /* __CNS3XXX_PM_H */
diff --git a/arch/arm/mach-cns3xxx/pm.c b/arch/arm/mach-cns3xxx/pm.c
index 38e4470..5e57955 100644
--- a/arch/arm/mach-cns3xxx/pm.c
+++ b/arch/arm/mach-cns3xxx/pm.c
@@ -6,10 +6,14 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/init.h>
+#include <linux/module.h>
 #include <linux/io.h>
 #include <linux/delay.h>
+#include <asm/atomic.h>
 #include <mach/system.h>
 #include <mach/cns3xxx.h>
+#include <mach/pm.h>
 
 void cns3xxx_pwr_clk_en(unsigned int block)
 {
@@ -18,6 +22,16 @@
 	reg |= (block & PM_CLK_GATE_REG_MASK);
 	__raw_writel(reg, PM_CLK_GATE_REG);
 }
+EXPORT_SYMBOL(cns3xxx_pwr_clk_en);
+
+void cns3xxx_pwr_clk_dis(unsigned int block)
+{
+	u32 reg = __raw_readl(PM_CLK_GATE_REG);
+
+	reg &= ~(block & PM_CLK_GATE_REG_MASK);
+	__raw_writel(reg, PM_CLK_GATE_REG);
+}
+EXPORT_SYMBOL(cns3xxx_pwr_clk_dis);
 
 void cns3xxx_pwr_power_up(unsigned int block)
 {
@@ -29,6 +43,7 @@
 	/* Wait for 300us for the PLL output clock locked. */
 	udelay(300);
 };
+EXPORT_SYMBOL(cns3xxx_pwr_power_up);
 
 void cns3xxx_pwr_power_down(unsigned int block)
 {
@@ -38,6 +53,7 @@
 	reg |= (block & CNS3XXX_PWR_PLL_ALL);
 	__raw_writel(reg, PM_PLL_HM_PD_CTRL_REG);
 };
+EXPORT_SYMBOL(cns3xxx_pwr_power_down);
 
 static void cns3xxx_pwr_soft_rst_force(unsigned int block)
 {
@@ -51,11 +67,13 @@
 		reg &= ~(block & PM_SOFT_RST_REG_MASK);
 	} else {
 		reg &= ~(block & PM_SOFT_RST_REG_MASK);
+		__raw_writel(reg, PM_SOFT_RST_REG);
 		reg |= (block & PM_SOFT_RST_REG_MASK);
 	}
 
 	__raw_writel(reg, PM_SOFT_RST_REG);
 }
+EXPORT_SYMBOL(cns3xxx_pwr_soft_rst_force);
 
 void cns3xxx_pwr_soft_rst(unsigned int block)
 {
@@ -69,6 +87,7 @@
 	}
 	cns3xxx_pwr_soft_rst_force(block);
 }
+EXPORT_SYMBOL(cns3xxx_pwr_soft_rst);
 
 void arch_reset(char mode, const char *cmd)
 {
@@ -99,3 +118,7 @@
 
 	return cpu;
 }
+EXPORT_SYMBOL(cns3xxx_cpu_clock);
+
+atomic_t usb_pwr_ref = ATOMIC_INIT(0);
+EXPORT_SYMBOL(usb_pwr_ref);
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 67eb377..5a7c8f1 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -41,6 +41,7 @@
 	default y if MFD_TC6393XB
 	default y if ARCH_W90X900
 	default y if ARCH_DAVINCI_DA8XX
+	default y if ARCH_CNS3XXX
 	# PPC:
 	default y if STB03xxx
 	default y if PPC_MPC52xx
@@ -66,6 +67,7 @@
 	default y if ARCH_AT91SAM9G45
 	default y if ARCH_MXC
 	default y if ARCH_OMAP3
+	default y if ARCH_CNS3XXX
 	default PCI
 
 # ARM SA1111 chips have a non-PCI based "OHCI-compatible" USB host interface.
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 6f4f8e6..f8970d1 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -147,6 +147,14 @@
 	---help---
 		Enables support for the W90X900 USB controller
 
+config USB_CNS3XXX_EHCI
+	bool "Cavium CNS3XXX EHCI Module"
+	depends on USB_EHCI_HCD && ARCH_CNS3XXX
+	---help---
+	  Enable support for the CNS3XXX SOC's on-chip EHCI controller.
+	  It is needed for high-speed (480Mbit/sec) USB 2.0 device
+	  support.
+
 config USB_OXU210HP_HCD
 	tristate "OXU210HP HCD support"
 	depends on USB
@@ -286,6 +294,13 @@
 
 	  If unsure, say N.
 
+config USB_CNS3XXX_OHCI
+	bool "Cavium CNS3XXX OHCI Module"
+	depends on USB_OHCI_HCD && ARCH_CNS3XXX
+	---help---
+	  Enable support for the CNS3XXX SOC's on-chip OHCI controller.
+	  It is needed for low-speed USB 1.0 device support.
+
 config USB_OHCI_BIG_ENDIAN_DESC
 	bool
 	depends on USB_OHCI_HCD
diff --git a/drivers/usb/host/ehci-cns3xxx.c b/drivers/usb/host/ehci-cns3xxx.c
new file mode 100644
index 0000000..708a05b
--- /dev/null
+++ b/drivers/usb/host/ehci-cns3xxx.c
@@ -0,0 +1,171 @@
+/*
+ * Copyright 2008 Cavium Networks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/atomic.h>
+#include <mach/cns3xxx.h>
+#include <mach/pm.h>
+
+static int cns3xxx_ehci_init(struct usb_hcd *hcd)
+{
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+	int retval;
+
+	/*
+	 * EHCI and OHCI share the same clock and power,
+	 * resetting twice would cause the 1st controller been reset.
+	 * Therefore only do power up  at the first up device, and
+	 * power down at the last down device.
+	 *
+	 * Set USB AHB INCR length to 16
+	 */
+	if (atomic_inc_return(&usb_pwr_ref) == 1) {
+		cns3xxx_pwr_power_up(1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_USB);
+		cns3xxx_pwr_clk_en(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST);
+		cns3xxx_pwr_soft_rst(1 << PM_SOFT_RST_REG_OFFST_USB_HOST);
+		__raw_writel((__raw_readl(MISC_CHIP_CONFIG_REG) | (0X2 << 24)),
+			MISC_CHIP_CONFIG_REG);
+	}
+
+	ehci->caps = hcd->regs;
+	ehci->regs = hcd->regs
+		+ HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
+	ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
+
+	hcd->has_tt = 0;
+	ehci_reset(ehci);
+
+	retval = ehci_init(hcd);
+	if (retval)
+		return retval;
+
+	ehci_port_power(ehci, 0);
+
+	return retval;
+}
+
+static const struct hc_driver cns3xxx_ehci_hc_driver = {
+	.description		= hcd_name,
+	.product_desc		= "CNS3XXX EHCI Host Controller",
+	.hcd_priv_size		= sizeof(struct ehci_hcd),
+	.irq			= ehci_irq,
+	.flags			= HCD_MEMORY | HCD_USB2,
+	.reset			= cns3xxx_ehci_init,
+	.start			= ehci_run,
+	.stop			= ehci_stop,
+	.shutdown		= ehci_shutdown,
+	.urb_enqueue		= ehci_urb_enqueue,
+	.urb_dequeue		= ehci_urb_dequeue,
+	.endpoint_disable	= ehci_endpoint_disable,
+	.endpoint_reset		= ehci_endpoint_reset,
+	.get_frame_number	= ehci_get_frame,
+	.hub_status_data	= ehci_hub_status_data,
+	.hub_control		= ehci_hub_control,
+#ifdef CONFIG_PM
+	.bus_suspend		= ehci_bus_suspend,
+	.bus_resume		= ehci_bus_resume,
+#endif
+	.relinquish_port	= ehci_relinquish_port,
+	.port_handed_over	= ehci_port_handed_over,
+
+	.clear_tt_buffer_complete	= ehci_clear_tt_buffer_complete,
+};
+
+static int cns3xxx_ehci_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct usb_hcd *hcd;
+	const struct hc_driver *driver = &cns3xxx_ehci_hc_driver;
+	struct resource *res;
+	int irq;
+	int retval;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!res) {
+		dev_err(dev, "Found HC with no IRQ.\n");
+		return -ENODEV;
+	}
+	irq = res->start;
+
+	hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
+	if (!hcd)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(dev, "Found HC with no register addr.\n");
+		retval = -ENODEV;
+		goto err1;
+	}
+
+	hcd->rsrc_start = res->start;
+	hcd->rsrc_len = res->end - res->start + 1;
+
+	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
+				driver->description)) {
+		dev_dbg(dev, "controller already in use\n");
+		retval = -EBUSY;
+		goto err1;
+	}
+
+	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+	if (hcd->regs == NULL) {
+		dev_dbg(dev, "error mapping memory\n");
+		retval = -EFAULT;
+		goto err2;
+	}
+
+	retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
+	if (retval == 0)
+		return retval;
+
+	iounmap(hcd->regs);
+err2:
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+err1:
+	usb_put_hcd(hcd);
+
+	return retval;
+}
+
+static int cns3xxx_ehci_remove(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+
+	usb_remove_hcd(hcd);
+	iounmap(hcd->regs);
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+
+	/*
+	 * EHCI and OHCI share the same clock and power,
+	 * resetting twice would cause the 1st controller been reset.
+	 * Therefore only do power up  at the first up device, and
+	 * power down at the last down device.
+	 */
+	if (atomic_dec_return(&usb_pwr_ref) == 0)
+		cns3xxx_pwr_clk_dis(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST);
+
+	usb_put_hcd(hcd);
+
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+MODULE_ALIAS("platform:cns3xxx-ehci");
+
+static struct platform_driver cns3xxx_ehci_driver = {
+	.probe = cns3xxx_ehci_probe,
+	.remove = cns3xxx_ehci_remove,
+	.driver = {
+		.name = "cns3xxx-ehci",
+	},
+};
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index e906280..d0c8f7c 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1216,6 +1216,11 @@
 #define PLATFORM_DRIVER		ehci_octeon_driver
 #endif
 
+#ifdef CONFIG_USB_CNS3XXX_EHCI
+#include "ehci-cns3xxx.c"
+#define PLATFORM_DRIVER		cns3xxx_ehci_driver
+#endif
+
 #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
     !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \
     !defined(XILINX_OF_PLATFORM_DRIVER)
diff --git a/drivers/usb/host/ohci-cns3xxx.c b/drivers/usb/host/ohci-cns3xxx.c
new file mode 100644
index 0000000..f05ef87
--- /dev/null
+++ b/drivers/usb/host/ohci-cns3xxx.c
@@ -0,0 +1,165 @@
+/*
+ * Copyright 2008 Cavium Networks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/atomic.h>
+#include <mach/cns3xxx.h>
+#include <mach/pm.h>
+
+static int __devinit
+cns3xxx_ohci_start(struct usb_hcd *hcd)
+{
+	struct ohci_hcd	*ohci = hcd_to_ohci(hcd);
+	int ret;
+
+	/*
+	 * EHCI and OHCI share the same clock and power,
+	 * resetting twice would cause the 1st controller been reset.
+	 * Therefore only do power up  at the first up device, and
+	 * power down at the last down device.
+	 *
+	 * Set USB AHB INCR length to 16
+	 */
+	if (atomic_inc_return(&usb_pwr_ref) == 1) {
+		cns3xxx_pwr_power_up(1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_USB);
+		cns3xxx_pwr_clk_en(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST);
+		cns3xxx_pwr_soft_rst(1 << PM_SOFT_RST_REG_OFFST_USB_HOST);
+		__raw_writel((__raw_readl(MISC_CHIP_CONFIG_REG) | (0X2 << 24)),
+			MISC_CHIP_CONFIG_REG);
+	}
+
+	ret = ohci_init(ohci);
+	if (ret < 0)
+		return ret;
+
+	ohci->num_ports = 1;
+
+	ret = ohci_run(ohci);
+	if (ret < 0) {
+		err("can't start %s", hcd->self.bus_name);
+		ohci_stop(hcd);
+		return ret;
+	}
+	return 0;
+}
+
+static const struct hc_driver cns3xxx_ohci_hc_driver = {
+	.description		= hcd_name,
+	.product_desc		= "CNS3XXX OHCI Host controller",
+	.hcd_priv_size		= sizeof(struct ohci_hcd),
+	.irq			= ohci_irq,
+	.flags			= HCD_USB11 | HCD_MEMORY,
+	.start			= cns3xxx_ohci_start,
+	.stop			= ohci_stop,
+	.shutdown		= ohci_shutdown,
+	.urb_enqueue		= ohci_urb_enqueue,
+	.urb_dequeue		= ohci_urb_dequeue,
+	.endpoint_disable	= ohci_endpoint_disable,
+	.get_frame_number	= ohci_get_frame,
+	.hub_status_data	= ohci_hub_status_data,
+	.hub_control		= ohci_hub_control,
+#ifdef CONFIG_PM
+	.bus_suspend		= ohci_bus_suspend,
+	.bus_resume		= ohci_bus_resume,
+#endif
+	.start_port_reset	= ohci_start_port_reset,
+};
+
+static int cns3xxx_ohci_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct usb_hcd *hcd;
+	const struct hc_driver *driver = &cns3xxx_ohci_hc_driver;
+	struct resource *res;
+	int irq;
+	int retval;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!res) {
+		dev_err(dev, "Found HC with no IRQ.\n");
+		return -ENODEV;
+	}
+	irq = res->start;
+
+	hcd = usb_create_hcd(driver, dev, dev_name(dev));
+	if (!hcd)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(dev, "Found HC with no register addr.\n");
+		retval = -ENODEV;
+		goto err1;
+	}
+	hcd->rsrc_start = res->start;
+	hcd->rsrc_len = res->end - res->start + 1;
+
+	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
+			driver->description)) {
+		dev_dbg(dev, "controller already in use\n");
+		retval = -EBUSY;
+		goto err1;
+	}
+
+	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+	if (!hcd->regs) {
+		dev_dbg(dev, "error mapping memory\n");
+		retval = -EFAULT;
+		goto err2;
+	}
+
+	ohci_hcd_init(hcd_to_ohci(hcd));
+
+	retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
+	if (retval == 0)
+		return retval;
+
+	iounmap(hcd->regs);
+err2:
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+err1:
+	usb_put_hcd(hcd);
+	return retval;
+}
+
+static int cns3xxx_ohci_remove(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+
+	usb_remove_hcd(hcd);
+	iounmap(hcd->regs);
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+
+	/*
+	 * EHCI and OHCI share the same clock and power,
+	 * resetting twice would cause the 1st controller been reset.
+	 * Therefore only do power up  at the first up device, and
+	 * power down at the last down device.
+	 */
+	if (atomic_dec_return(&usb_pwr_ref) == 0)
+		cns3xxx_pwr_clk_dis(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST);
+
+	usb_put_hcd(hcd);
+
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+MODULE_ALIAS("platform:cns3xxx-ohci");
+
+static struct platform_driver ohci_hcd_cns3xxx_driver = {
+	.probe = cns3xxx_ohci_probe,
+	.remove = cns3xxx_ohci_remove,
+	.driver = {
+		.name = "cns3xxx-ohci",
+	},
+};
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 5179acb..5cb6731b 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -1111,6 +1111,11 @@
 #define PLATFORM_DRIVER		ohci_octeon_driver
 #endif
 
+#ifdef CONFIG_USB_CNS3XXX_OHCI
+#include "ohci-cns3xxx.c"
+#define PLATFORM_DRIVER		ohci_hcd_cns3xxx_driver
+#endif
+
 #if	!defined(PCI_DRIVER) &&		\
 	!defined(PLATFORM_DRIVER) &&	\
 	!defined(OMAP1_PLATFORM_DRIVER) &&	\