drivers/perf/arm_pmu_acpi.c - linux - Git at Google

 // SPDX-License-Identifier: GPL-2.0-only
 /*
  * ACPI probing code for ARM performance counters.
  *
  * Copyright (C) 2017 ARM Ltd.
  */

 #include <linux/acpi.h>
 #include <linux/cpumask.h>
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/irqdesc.h>
 #include <linux/percpu.h>
 #include <linux/perf/arm_pmu.h>

 #include <asm/cputype.h>

 static DEFINE_PER_CPU(struct arm_pmu *, probed_pmus);
 static DEFINE_PER_CPU(int, pmu_irqs);

 static int arm_pmu_acpi_register_irq(int cpu)
 {
 	struct acpi_madt_generic_interrupt *gicc;
 	int gsi, trigger;

 	gicc = acpi_cpu_get_madt_gicc(cpu);

 	gsi = gicc->performance_interrupt;

 	/*
 	 * Per the ACPI spec, the MADT cannot describe a PMU that doesn't
 	 * have an interrupt. QEMU advertises this by using a GSI of zero,
 	 * which is not known to be valid on any hardware despite being
 	 * valid per the spec. Take the pragmatic approach and reject a
 	 * GSI of zero for now.
 	 */
 	if (!gsi)
 		return 0;

 	if (gicc->flags & ACPI_MADT_PERFORMANCE_IRQ_MODE)
 		trigger = ACPI_EDGE_SENSITIVE;
 	else
 		trigger = ACPI_LEVEL_SENSITIVE;

 	/*
 	 * Helpfully, the MADT GICC doesn't have a polarity flag for the
 	 * "performance interrupt". Luckily, on compliant GICs the polarity is
 	 * a fixed value in HW (for both SPIs and PPIs) that we cannot change
 	 * from SW.
 	 *
 	 * Here we pass in ACPI_ACTIVE_HIGH to keep the core code happy. This
 	 * may not match the real polarity, but that should not matter.
 	 *
 	 * Other interrupt controllers are not supported with ACPI.
 	 */
 	return acpi_register_gsi(NULL, gsi, trigger, ACPI_ACTIVE_HIGH);
 }

 static void arm_pmu_acpi_unregister_irq(int cpu)
 {
 	struct acpi_madt_generic_interrupt *gicc;
 	int gsi;

 	gicc = acpi_cpu_get_madt_gicc(cpu);

 	gsi = gicc->performance_interrupt;
 	if (gsi)
 		acpi_unregister_gsi(gsi);
 }

 #if IS_ENABLED(CONFIG_ARM_SPE_PMU)
 static struct resource spe_resources[] = {
 	{
 		/* irq */
 		.flags          = IORESOURCE_IRQ,
 	}
 };

 static struct platform_device spe_dev = {
 	.name = ARMV8_SPE_PDEV_NAME,
 	.id = -1,
 	.resource = spe_resources,
 	.num_resources = ARRAY_SIZE(spe_resources)
 };

 /*
  * For lack of a better place, hook the normal PMU MADT walk
  * and create a SPE device if we detect a recent MADT with
  * a homogeneous PPI mapping.
  */
 static void arm_spe_acpi_register_device(void)
 {
 	int cpu, hetid, irq, ret;
 	bool first = true;
 	u16 gsi = 0;

 	/*
 	 * Sanity check all the GICC tables for the same interrupt number.
 	 * For now, we only support homogeneous ACPI/SPE machines.
 	 */
 	for_each_possible_cpu(cpu) {
 		struct acpi_madt_generic_interrupt *gicc;

 		gicc = acpi_cpu_get_madt_gicc(cpu);
 		if (gicc->header.length < ACPI_MADT_GICC_SPE)
 			return;

 		if (first) {
 			gsi = gicc->spe_interrupt;
 			if (!gsi)
 				return;
 			hetid = find_acpi_cpu_topology_hetero_id(cpu);
 			first = false;
 		} else if ((gsi != gicc->spe_interrupt) ||
 			   (hetid != find_acpi_cpu_topology_hetero_id(cpu))) {
 			pr_warn("ACPI: SPE must be homogeneous\n");
 			return;
 		}
 	}

 	irq = acpi_register_gsi(NULL, gsi, ACPI_LEVEL_SENSITIVE,
 				ACPI_ACTIVE_HIGH);
 	if (irq < 0) {
 		pr_warn("ACPI: SPE Unable to register interrupt: %d\n", gsi);
 		return;
 	}

 	spe_resources[0].start = irq;
 	ret = platform_device_register(&spe_dev);
 	if (ret < 0) {
 		pr_warn("ACPI: SPE: Unable to register device\n");
 		acpi_unregister_gsi(gsi);
 	}
 }
 #else
 static inline void arm_spe_acpi_register_device(void)
 {
 }
 #endif /* CONFIG_ARM_SPE_PMU */

 static int arm_pmu_acpi_parse_irqs(void)
 {
 	int irq, cpu, irq_cpu, err;

 	for_each_possible_cpu(cpu) {
 		irq = arm_pmu_acpi_register_irq(cpu);
 		if (irq < 0) {
 			err = irq;
 			pr_warn("Unable to parse ACPI PMU IRQ for CPU%d: %d\n",
 				cpu, err);
 			goto out_err;
 		} else if (irq == 0) {
 			pr_warn("No ACPI PMU IRQ for CPU%d\n", cpu);
 		}

 		/*
 		 * Log and request the IRQ so the core arm_pmu code can manage
 		 * it. We'll have to sanity-check IRQs later when we associate
 		 * them with their PMUs.
 		 */
 		per_cpu(pmu_irqs, cpu) = irq;
 		armpmu_request_irq(irq, cpu);
 	}

 	return 0;

 out_err:
 	for_each_possible_cpu(cpu) {
 		irq = per_cpu(pmu_irqs, cpu);
 		if (!irq)
 			continue;

 		arm_pmu_acpi_unregister_irq(cpu);

 		/*
 		 * Blat all copies of the IRQ so that we only unregister the
 		 * corresponding GSI once (e.g. when we have PPIs).
 		 */
 		for_each_possible_cpu(irq_cpu) {
 			if (per_cpu(pmu_irqs, irq_cpu) == irq)
 				per_cpu(pmu_irqs, irq_cpu) = 0;
 		}
 	}

 	return err;
 }

 static struct arm_pmu *arm_pmu_acpi_find_alloc_pmu(void)
 {
 	unsigned long cpuid = read_cpuid_id();
 	struct arm_pmu *pmu;
 	int cpu;

 	for_each_possible_cpu(cpu) {
 		pmu = per_cpu(probed_pmus, cpu);
 		if (!pmu || pmu->acpi_cpuid != cpuid)
 			continue;

 		return pmu;
 	}

 	pmu = armpmu_alloc_atomic();
 	if (!pmu) {
 		pr_warn("Unable to allocate PMU for CPU%d\n",
 			smp_processor_id());
 		return NULL;
 	}

 	pmu->acpi_cpuid = cpuid;

 	return pmu;
 }

 /*
  * Check whether the new IRQ is compatible with those already associated with
  * the PMU (e.g. we don't have mismatched PPIs).
  */
 static bool pmu_irq_matches(struct arm_pmu *pmu, int irq)
 {
 	struct pmu_hw_events __percpu *hw_events = pmu->hw_events;
 	int cpu;

 	if (!irq)
 		return true;

 	for_each_cpu(cpu, &pmu->supported_cpus) {
 		int other_irq = per_cpu(hw_events->irq, cpu);
 		if (!other_irq)
 			continue;

 		if (irq == other_irq)
 			continue;
 		if (!irq_is_percpu_devid(irq) && !irq_is_percpu_devid(other_irq))
 			continue;

 		pr_warn("mismatched PPIs detected\n");
 		return false;
 	}

 	return true;
 }

 /*
  * This must run before the common arm_pmu hotplug logic, so that we can
  * associate a CPU and its interrupt before the common code tries to manage the
  * affinity and so on.
  *
  * Note that hotplug events are serialized, so we cannot race with another CPU
  * coming up. The perf core won't open events while a hotplug event is in
  * progress.
  */
 static int arm_pmu_acpi_cpu_starting(unsigned int cpu)
 {
 	struct arm_pmu *pmu;
 	struct pmu_hw_events __percpu *hw_events;
 	int irq;

 	/* If we've already probed this CPU, we have nothing to do */
 	if (per_cpu(probed_pmus, cpu))
 		return 0;

 	irq = per_cpu(pmu_irqs, cpu);

 	pmu = arm_pmu_acpi_find_alloc_pmu();
 	if (!pmu)
 		return -ENOMEM;

 	per_cpu(probed_pmus, cpu) = pmu;

 	if (pmu_irq_matches(pmu, irq)) {
 		hw_events = pmu->hw_events;
 		per_cpu(hw_events->irq, cpu) = irq;
 	}

 	cpumask_set_cpu(cpu, &pmu->supported_cpus);

 	/*
 	 * Ideally, we'd probe the PMU here when we find the first matching
 	 * CPU. We can't do that for several reasons; see the comment in
 	 * arm_pmu_acpi_init().
 	 *
 	 * So for the time being, we're done.
 	 */
 	return 0;
 }

 int arm_pmu_acpi_probe(armpmu_init_fn init_fn)
 {
 	int pmu_idx = 0;
 	int cpu, ret;

 	/*
 	 * Initialise and register the set of PMUs which we know about right
 	 * now. Ideally we'd do this in arm_pmu_acpi_cpu_starting() so that we
 	 * could handle late hotplug, but this may lead to deadlock since we
 	 * might try to register a hotplug notifier instance from within a
 	 * hotplug notifier.
 	 *
 	 * There's also the problem of having access to the right init_fn,
 	 * without tying this too deeply into the "real" PMU driver.
 	 *
 	 * For the moment, as with the platform/DT case, we need at least one
 	 * of a PMU's CPUs to be online at probe time.
 	 */
 	for_each_possible_cpu(cpu) {
 		struct arm_pmu *pmu = per_cpu(probed_pmus, cpu);
 		char *base_name;

 		if (!pmu || pmu->name)
 			continue;

 		ret = init_fn(pmu);
 		if (ret == -ENODEV) {
 			/* PMU not handled by this driver, or not present */
 			continue;
 		} else if (ret) {
 			pr_warn("Unable to initialise PMU for CPU%d\n", cpu);
 			return ret;
 		}

 		base_name = pmu->name;
 		pmu->name = kasprintf(GFP_KERNEL, "%s_%d", base_name, pmu_idx++);
 		if (!pmu->name) {
 			pr_warn("Unable to allocate PMU name for CPU%d\n", cpu);
 			return -ENOMEM;
 		}

 		ret = armpmu_register(pmu);
 		if (ret) {
 			pr_warn("Failed to register PMU for CPU%d\n", cpu);
 			kfree(pmu->name);
 			return ret;
 		}
 	}

 	return 0;
 }

 static int arm_pmu_acpi_init(void)
 {
 	int ret;

 	if (acpi_disabled)
 		return 0;

 	arm_spe_acpi_register_device();

 	ret = arm_pmu_acpi_parse_irqs();
 	if (ret)
 		return ret;

 	ret = cpuhp_setup_state(CPUHP_AP_PERF_ARM_ACPI_STARTING,
 				"perf/arm/pmu_acpi:starting",
 				arm_pmu_acpi_cpu_starting, NULL);

 	return ret;
 }
 subsys_initcall(arm_pmu_acpi_init)
	// SPDX-License-Identifier: GPL-2.0-only
	/*
	* ACPI probing code for ARM performance counters.
	*
	* Copyright (C) 2017 ARM Ltd.
	*/

	#include <linux/acpi.h>
	#include <linux/cpumask.h>
	#include <linux/init.h>
	#include <linux/irq.h>
	#include <linux/irqdesc.h>
	#include <linux/percpu.h>
	#include <linux/perf/arm_pmu.h>

	#include <asm/cputype.h>

	static DEFINE_PER_CPU(struct arm_pmu *, probed_pmus);
	static DEFINE_PER_CPU(int, pmu_irqs);

	static int arm_pmu_acpi_register_irq(int cpu)
	{
	struct acpi_madt_generic_interrupt *gicc;
	int gsi, trigger;

	gicc = acpi_cpu_get_madt_gicc(cpu);

	gsi = gicc->performance_interrupt;

	/*
	* Per the ACPI spec, the MADT cannot describe a PMU that doesn't
	* have an interrupt. QEMU advertises this by using a GSI of zero,
	* which is not known to be valid on any hardware despite being
	* valid per the spec. Take the pragmatic approach and reject a
	* GSI of zero for now.
	*/
	if (!gsi)
	return 0;

	if (gicc->flags & ACPI_MADT_PERFORMANCE_IRQ_MODE)
	trigger = ACPI_EDGE_SENSITIVE;
	else
	trigger = ACPI_LEVEL_SENSITIVE;

	/*
	* Helpfully, the MADT GICC doesn't have a polarity flag for the
	* "performance interrupt". Luckily, on compliant GICs the polarity is
	* a fixed value in HW (for both SPIs and PPIs) that we cannot change
	* from SW.
	*
	* Here we pass in ACPI_ACTIVE_HIGH to keep the core code happy. This
	* may not match the real polarity, but that should not matter.
	*
	* Other interrupt controllers are not supported with ACPI.
	*/
	return acpi_register_gsi(NULL, gsi, trigger, ACPI_ACTIVE_HIGH);
	}

	static void arm_pmu_acpi_unregister_irq(int cpu)
	{
	struct acpi_madt_generic_interrupt *gicc;
	int gsi;

	gicc = acpi_cpu_get_madt_gicc(cpu);

	gsi = gicc->performance_interrupt;
	if (gsi)
	acpi_unregister_gsi(gsi);
	}

	#if IS_ENABLED(CONFIG_ARM_SPE_PMU)
	static struct resource spe_resources[] = {
	{
	/* irq */
	.flags = IORESOURCE_IRQ,
	}
	};

	static struct platform_device spe_dev = {
	.name = ARMV8_SPE_PDEV_NAME,
	.id = -1,
	.resource = spe_resources,
	.num_resources = ARRAY_SIZE(spe_resources)
	};

	/*
	* For lack of a better place, hook the normal PMU MADT walk
	* and create a SPE device if we detect a recent MADT with
	* a homogeneous PPI mapping.
	*/
	static void arm_spe_acpi_register_device(void)
	{
	int cpu, hetid, irq, ret;
	bool first = true;
	u16 gsi = 0;

	/*
	* Sanity check all the GICC tables for the same interrupt number.
	* For now, we only support homogeneous ACPI/SPE machines.
	*/
	for_each_possible_cpu(cpu) {
	struct acpi_madt_generic_interrupt *gicc;

	gicc = acpi_cpu_get_madt_gicc(cpu);
	if (gicc->header.length < ACPI_MADT_GICC_SPE)
	return;

	if (first) {
	gsi = gicc->spe_interrupt;
	if (!gsi)
	return;
	hetid = find_acpi_cpu_topology_hetero_id(cpu);
	first = false;
	} else if ((gsi != gicc->spe_interrupt) \|\|
	(hetid != find_acpi_cpu_topology_hetero_id(cpu))) {
	pr_warn("ACPI: SPE must be homogeneous\n");
	return;
	}
	}

	irq = acpi_register_gsi(NULL, gsi, ACPI_LEVEL_SENSITIVE,
	ACPI_ACTIVE_HIGH);
	if (irq < 0) {
	pr_warn("ACPI: SPE Unable to register interrupt: %d\n", gsi);
	return;
	}

	spe_resources[0].start = irq;
	ret = platform_device_register(&spe_dev);
	if (ret < 0) {
	pr_warn("ACPI: SPE: Unable to register device\n");
	acpi_unregister_gsi(gsi);
	}
	}
	#else
	static inline void arm_spe_acpi_register_device(void)
	{
	}
	#endif /* CONFIG_ARM_SPE_PMU */

	static int arm_pmu_acpi_parse_irqs(void)
	{
	int irq, cpu, irq_cpu, err;

	for_each_possible_cpu(cpu) {
	irq = arm_pmu_acpi_register_irq(cpu);
	if (irq < 0) {
	err = irq;
	pr_warn("Unable to parse ACPI PMU IRQ for CPU%d: %d\n",
	cpu, err);
	goto out_err;
	} else if (irq == 0) {
	pr_warn("No ACPI PMU IRQ for CPU%d\n", cpu);
	}

	/*
	* Log and request the IRQ so the core arm_pmu code can manage
	* it. We'll have to sanity-check IRQs later when we associate
	* them with their PMUs.
	*/
	per_cpu(pmu_irqs, cpu) = irq;
	armpmu_request_irq(irq, cpu);
	}

	return 0;

	out_err:
	for_each_possible_cpu(cpu) {
	irq = per_cpu(pmu_irqs, cpu);
	if (!irq)
	continue;

	arm_pmu_acpi_unregister_irq(cpu);

	/*
	* Blat all copies of the IRQ so that we only unregister the
	* corresponding GSI once (e.g. when we have PPIs).
	*/
	for_each_possible_cpu(irq_cpu) {
	if (per_cpu(pmu_irqs, irq_cpu) == irq)
	per_cpu(pmu_irqs, irq_cpu) = 0;
	}
	}

	return err;
	}

	static struct arm_pmu *arm_pmu_acpi_find_alloc_pmu(void)
	{
	unsigned long cpuid = read_cpuid_id();
	struct arm_pmu *pmu;
	int cpu;

	for_each_possible_cpu(cpu) {
	pmu = per_cpu(probed_pmus, cpu);
	if (!pmu \|\| pmu->acpi_cpuid != cpuid)
	continue;

	return pmu;
	}

	pmu = armpmu_alloc_atomic();
	if (!pmu) {
	pr_warn("Unable to allocate PMU for CPU%d\n",
	smp_processor_id());
	return NULL;
	}

	pmu->acpi_cpuid = cpuid;

	return pmu;
	}

	/*
	* Check whether the new IRQ is compatible with those already associated with
	* the PMU (e.g. we don't have mismatched PPIs).
	*/
	static bool pmu_irq_matches(struct arm_pmu *pmu, int irq)
	{
	struct pmu_hw_events __percpu *hw_events = pmu->hw_events;
	int cpu;

	if (!irq)
	return true;

	for_each_cpu(cpu, &pmu->supported_cpus) {
	int other_irq = per_cpu(hw_events->irq, cpu);
	if (!other_irq)
	continue;

	if (irq == other_irq)
	continue;
	if (!irq_is_percpu_devid(irq) && !irq_is_percpu_devid(other_irq))
	continue;

	pr_warn("mismatched PPIs detected\n");
	return false;
	}

	return true;
	}

	/*
	* This must run before the common arm_pmu hotplug logic, so that we can
	* associate a CPU and its interrupt before the common code tries to manage the
	* affinity and so on.
	*
	* Note that hotplug events are serialized, so we cannot race with another CPU
	* coming up. The perf core won't open events while a hotplug event is in
	* progress.
	*/
	static int arm_pmu_acpi_cpu_starting(unsigned int cpu)
	{
	struct arm_pmu *pmu;
	struct pmu_hw_events __percpu *hw_events;
	int irq;

	/* If we've already probed this CPU, we have nothing to do */
	if (per_cpu(probed_pmus, cpu))
	return 0;

	irq = per_cpu(pmu_irqs, cpu);

	pmu = arm_pmu_acpi_find_alloc_pmu();
	if (!pmu)
	return -ENOMEM;

	per_cpu(probed_pmus, cpu) = pmu;

	if (pmu_irq_matches(pmu, irq)) {
	hw_events = pmu->hw_events;
	per_cpu(hw_events->irq, cpu) = irq;
	}

	cpumask_set_cpu(cpu, &pmu->supported_cpus);

	/*
	* Ideally, we'd probe the PMU here when we find the first matching
	* CPU. We can't do that for several reasons; see the comment in
	* arm_pmu_acpi_init().
	*
	* So for the time being, we're done.
	*/
	return 0;
	}

	int arm_pmu_acpi_probe(armpmu_init_fn init_fn)
	{
	int pmu_idx = 0;
	int cpu, ret;

	/*
	* Initialise and register the set of PMUs which we know about right
	* now. Ideally we'd do this in arm_pmu_acpi_cpu_starting() so that we
	* could handle late hotplug, but this may lead to deadlock since we
	* might try to register a hotplug notifier instance from within a
	* hotplug notifier.
	*
	* There's also the problem of having access to the right init_fn,
	* without tying this too deeply into the "real" PMU driver.
	*
	* For the moment, as with the platform/DT case, we need at least one
	* of a PMU's CPUs to be online at probe time.
	*/
	for_each_possible_cpu(cpu) {
	struct arm_pmu *pmu = per_cpu(probed_pmus, cpu);
	char *base_name;

	if (!pmu \|\| pmu->name)
	continue;

	ret = init_fn(pmu);
	if (ret == -ENODEV) {
	/* PMU not handled by this driver, or not present */
	continue;
	} else if (ret) {
	pr_warn("Unable to initialise PMU for CPU%d\n", cpu);
	return ret;
	}

	base_name = pmu->name;
	pmu->name = kasprintf(GFP_KERNEL, "%s_%d", base_name, pmu_idx++);
	if (!pmu->name) {
	pr_warn("Unable to allocate PMU name for CPU%d\n", cpu);
	return -ENOMEM;
	}

	ret = armpmu_register(pmu);
	if (ret) {
	pr_warn("Failed to register PMU for CPU%d\n", cpu);
	kfree(pmu->name);
	return ret;
	}
	}

	return 0;
	}

	static int arm_pmu_acpi_init(void)
	{
	int ret;

	if (acpi_disabled)
	return 0;

	arm_spe_acpi_register_device();

	ret = arm_pmu_acpi_parse_irqs();
	if (ret)
	return ret;

	ret = cpuhp_setup_state(CPUHP_AP_PERF_ARM_ACPI_STARTING,
	"perf/arm/pmu_acpi:starting",
	arm_pmu_acpi_cpu_starting, NULL);

	return ret;
	}
	subsys_initcall(arm_pmu_acpi_init)