arch/powerpc/boot/dts/fsl/t1024rdb.dts - linux - Git at Google

 /*
  * T1024 RDB Device Tree Source
  *
  * Copyright 2014 Freescale Semiconductor Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
  *     * Redistributions of source code must retain the above copyright
  *	 notice, this list of conditions and the following disclaimer.
  *     * Redistributions in binary form must reproduce the above copyright
  *	 notice, this list of conditions and the following disclaimer in the
  *	 documentation and/or other materials provided with the distribution.
  *     * Neither the name of Freescale Semiconductor nor the
  *	 names of its contributors may be used to endorse or promote products
  *	 derived from this software without specific prior written permission.
  *
  *
  * ALTERNATIVELY, this software may be distributed under the terms of the
  * GNU General Public License ("GPL") as published by the Free Software
  * Foundation, either version 2 of that License or (at your option) any
  * later version.
  *
  * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
  * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
  * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
  * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
  * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
  * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
  * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */

 /include/ "t102xsi-pre.dtsi"

 / {
 	model = "fsl,T1024RDB";
 	compatible = "fsl,T1024RDB";
 	#address-cells = <2>;
 	#size-cells = <2>;
 	interrupt-parent = <&mpic>;

 	aliases {
 		sg_2500_aqr105_phy4 = &sg_2500_aqr105_phy4;
 	};

 	reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;

 		bman_fbpr: bman-fbpr {
 			size = <0 0x1000000>;
 			alignment = <0 0x1000000>;
 		};

 		qman_fqd: qman-fqd {
 			size = <0 0x400000>;
 			alignment = <0 0x400000>;
 		};

 		qman_pfdr: qman-pfdr {
 			size = <0 0x2000000>;
 			alignment = <0 0x2000000>;
 		};
 	};

 	ifc: localbus@ffe124000 {
 		reg = <0xf 0xfe124000 0 0x2000>;
 		ranges = <0 0 0xf 0xe8000000 0x08000000
 			  2 0 0xf 0xff800000 0x00010000
 			  3 0 0xf 0xffdf0000 0x00008000>;

 		nor@0,0 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "cfi-flash";
 			reg = <0x0 0x0 0x8000000>;
 			bank-width = <2>;
 			device-width = <1>;
 		};

 		nand@1,0 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "fsl,ifc-nand";
 			reg = <0x2 0x0 0x10000>;
 		};

 		board-control@2,0 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "fsl,t1024-cpld", "fsl,deepsleep-cpld";
 			reg = <3 0 0x300>;
 			ranges = <0 3 0 0x300>;
 			bank-width = <1>;
 			device-width = <1>;
 		};
 	};

 	memory {
 		device_type = "memory";
 	};

 	dcsr: dcsr@f00000000 {
 		ranges = <0x00000000 0xf 0x00000000 0x01072000>;
 	};

 	bportals: bman-portals@ff4000000 {
 		ranges = <0x0 0xf 0xf4000000 0x2000000>;
 	};

 	qportals: qman-portals@ff6000000 {
 		ranges = <0x0 0xf 0xf6000000 0x2000000>;
 	};

 	soc: soc@ffe000000 {
 		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
 		reg = <0xf 0xfe000000 0 0x00001000>;
 		spi@110000 {
 			flash@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
 				compatible = "micron,n25q512ax3", "jedec,spi-nor";
 				reg = <0>;
 				spi-max-frequency = <10000000>; /* input clk */
 			};

 			slic@1 {
 				compatible = "maxim,ds26522";
 				reg = <1>;
 				spi-max-frequency = <2000000>;
 			};

 			slic@2 {
 				compatible = "maxim,ds26522";
 				reg = <2>;
 				spi-max-frequency = <2000000>;
 			};
 		};

 		i2c@118000 {
 			adt7461@4c {
 				/* Thermal Monitor */
 				compatible = "adi,adt7461";
 				reg = <0x4c>;
 			};

 			current-sensor@40 {
 				compatible = "ti,ina220";
 				reg = <0x40>;
 				shunt-resistor = <1000>;
 			};

 			eeprom@50 {
 				compatible = "atmel,24c256";
 				reg = <0x50>;
 			};

 			rtc@68 {
 				compatible = "dallas,ds1339";
 				reg = <0x68>;
 			};
 		};

 		i2c@118100 {
 			i2c-mux@77 {
 				compatible = "nxp,pca9546";
 				reg = <0x77>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 			};
 		};

 		fman@400000 {
 			fm1mac1: ethernet@e0000 {
 				phy-handle = <&xg_aqr105_phy3>;
 				phy-connection-type = "xgmii";
 				sleep = <&rcpm 0x80000000>;
 			};

 			fm1mac2: ethernet@e2000 {
 				sleep = <&rcpm 0x40000000>;
 			};

 			fm1mac3: ethernet@e4000 {
 				phy-handle = <&rgmii_phy2>;
 				phy-connection-type = "rgmii";
 				sleep = <&rcpm 0x20000000>;
 			};

 			fm1mac4: ethernet@e6000 {
 				phy-handle = <&rgmii_phy1>;
 				phy-connection-type = "rgmii";
 				sleep = <&rcpm 0x10000000>;
 			};


 			mdio0: mdio@fc000 {
 				rgmii_phy1: ethernet-phy@2 {
 					reg = <0x2>;
 				};
 				rgmii_phy2: ethernet-phy@6 {
 					reg = <0x6>;
 				};
 			};

 			xmdio0: mdio@fd000 {
 				xg_aqr105_phy3: ethernet-phy@1 {
 					compatible = "ethernet-phy-ieee802.3-c45";
 					reg = <0x1>;
 				};
 				sg_2500_aqr105_phy4: ethernet-phy@2 {
 					compatible = "ethernet-phy-ieee802.3-c45";
 					reg = <0x2>;
 				};
 			};
 		};
 	};

 	pci0: pcie@ffe240000 {
 		reg = <0xf 0xfe240000 0 0x10000>;
 		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0 0x10000000
 			  0x01000000 0 0x00000000 0xf 0xf8000000 0 0x00010000>;
 		pcie@0 {
 			ranges = <0x02000000 0 0xe0000000
 				  0x02000000 0 0xe0000000
 				  0 0x10000000

 				  0x01000000 0 0x00000000
 				  0x01000000 0 0x00000000
 				  0 0x00010000>;
 		};
 	};

 	pci1: pcie@ffe250000 {
 		reg = <0xf 0xfe250000 0 0x10000>;
 		ranges = <0x02000000 0 0xe0000000 0xc 0x10000000 0 0x10000000
 			  0x01000000 0 0x00000000 0xf 0xf8010000 0 0x00010000>;
 		pcie@0 {
 			ranges = <0x02000000 0 0xe0000000
 				  0x02000000 0 0xe0000000
 				  0 0x10000000

 				  0x01000000 0 0x00000000
 				  0x01000000 0 0x00000000
 				  0 0x00010000>;
 		};
 	};

 	pci2: pcie@ffe260000 {
 		reg = <0xf 0xfe260000 0 0x10000>;
 		ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x10000000
 			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
 		pcie@0 {
 			ranges = <0x02000000 0 0xe0000000
 				  0x02000000 0 0xe0000000
 				  0 0x10000000

 				  0x01000000 0 0x00000000
 				  0x01000000 0 0x00000000
 				  0 0x00010000>;
 		};
 	};
 };

 #include "t1024si-post.dtsi"
	/*
	* T1024 RDB Device Tree Source
	*
	* Copyright 2014 Freescale Semiconductor Inc.
	*
	* Redistribution and use in source and binary forms, with or without
	* modification, are permitted provided that the following conditions are met:
	* * Redistributions of source code must retain the above copyright
	* notice, this list of conditions and the following disclaimer.
	* * Redistributions in binary form must reproduce the above copyright
	* notice, this list of conditions and the following disclaimer in the
	* documentation and/or other materials provided with the distribution.
	* * Neither the name of Freescale Semiconductor nor the
	* names of its contributors may be used to endorse or promote products
	* derived from this software without specific prior written permission.
	*
	*
	* ALTERNATIVELY, this software may be distributed under the terms of the
	* GNU General Public License ("GPL") as published by the Free Software
	* Foundation, either version 2 of that License or (at your option) any
	* later version.
	*
	* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
	* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
	* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
	* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
	* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
	* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
	* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
	* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
	* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
	* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
	*/

	/include/ "t102xsi-pre.dtsi"

	/ {
	model = "fsl,T1024RDB";
	compatible = "fsl,T1024RDB";
	#address-cells = <2>;
	#size-cells = <2>;
	interrupt-parent = <&mpic>;

	aliases {
	sg_2500_aqr105_phy4 = &sg_2500_aqr105_phy4;
	};

	reserved-memory {
	#address-cells = <2>;
	#size-cells = <2>;
	ranges;

	bman_fbpr: bman-fbpr {
	size = <0 0x1000000>;
	alignment = <0 0x1000000>;
	};

	qman_fqd: qman-fqd {
	size = <0 0x400000>;
	alignment = <0 0x400000>;
	};

	qman_pfdr: qman-pfdr {
	size = <0 0x2000000>;
	alignment = <0 0x2000000>;
	};
	};

	ifc: localbus@ffe124000 {
	reg = <0xf 0xfe124000 0 0x2000>;
	ranges = <0 0 0xf 0xe8000000 0x08000000
	2 0 0xf 0xff800000 0x00010000
	3 0 0xf 0xffdf0000 0x00008000>;

	nor@0,0 {
	#address-cells = <1>;
	#size-cells = <1>;
	compatible = "cfi-flash";
	reg = <0x0 0x0 0x8000000>;
	bank-width = <2>;
	device-width = <1>;
	};

	nand@1,0 {
	#address-cells = <1>;
	#size-cells = <1>;
	compatible = "fsl,ifc-nand";
	reg = <0x2 0x0 0x10000>;
	};

	board-control@2,0 {
	#address-cells = <1>;
	#size-cells = <1>;
	compatible = "fsl,t1024-cpld", "fsl,deepsleep-cpld";
	reg = <3 0 0x300>;
	ranges = <0 3 0 0x300>;
	bank-width = <1>;
	device-width = <1>;
	};
	};

	memory {
	device_type = "memory";
	};

	dcsr: dcsr@f00000000 {
	ranges = <0x00000000 0xf 0x00000000 0x01072000>;
	};

	bportals: bman-portals@ff4000000 {
	ranges = <0x0 0xf 0xf4000000 0x2000000>;
	};

	qportals: qman-portals@ff6000000 {
	ranges = <0x0 0xf 0xf6000000 0x2000000>;
	};

	soc: soc@ffe000000 {
	ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
	reg = <0xf 0xfe000000 0 0x00001000>;
	spi@110000 {
	flash@0 {
	#address-cells = <1>;
	#size-cells = <1>;
	compatible = "micron,n25q512ax3", "jedec,spi-nor";
	reg = <0>;
	spi-max-frequency = <10000000>; /* input clk */
	};

	slic@1 {
	compatible = "maxim,ds26522";
	reg = <1>;
	spi-max-frequency = <2000000>;
	};

	slic@2 {
	compatible = "maxim,ds26522";
	reg = <2>;
	spi-max-frequency = <2000000>;
	};
	};

	i2c@118000 {
	adt7461@4c {
	/* Thermal Monitor */
	compatible = "adi,adt7461";
	reg = <0x4c>;
	};

	current-sensor@40 {
	compatible = "ti,ina220";
	reg = <0x40>;
	shunt-resistor = <1000>;
	};

	eeprom@50 {
	compatible = "atmel,24c256";
	reg = <0x50>;
	};

	rtc@68 {
	compatible = "dallas,ds1339";
	reg = <0x68>;
	};
	};

	i2c@118100 {
	i2c-mux@77 {
	compatible = "nxp,pca9546";
	reg = <0x77>;
	#address-cells = <1>;
	#size-cells = <0>;
	};
	};

	fman@400000 {
	fm1mac1: ethernet@e0000 {
	phy-handle = <&xg_aqr105_phy3>;
	phy-connection-type = "xgmii";
	sleep = <&rcpm 0x80000000>;
	};

	fm1mac2: ethernet@e2000 {
	sleep = <&rcpm 0x40000000>;
	};

	fm1mac3: ethernet@e4000 {
	phy-handle = <&rgmii_phy2>;
	phy-connection-type = "rgmii";
	sleep = <&rcpm 0x20000000>;
	};

	fm1mac4: ethernet@e6000 {
	phy-handle = <&rgmii_phy1>;
	phy-connection-type = "rgmii";
	sleep = <&rcpm 0x10000000>;
	};


	mdio0: mdio@fc000 {
	rgmii_phy1: ethernet-phy@2 {
	reg = <0x2>;
	};
	rgmii_phy2: ethernet-phy@6 {
	reg = <0x6>;
	};
	};

	xmdio0: mdio@fd000 {
	xg_aqr105_phy3: ethernet-phy@1 {
	compatible = "ethernet-phy-ieee802.3-c45";
	reg = <0x1>;
	};
	sg_2500_aqr105_phy4: ethernet-phy@2 {
	compatible = "ethernet-phy-ieee802.3-c45";
	reg = <0x2>;
	};
	};
	};
	};

	pci0: pcie@ffe240000 {
	reg = <0xf 0xfe240000 0 0x10000>;
	ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0 0x10000000
	0x01000000 0 0x00000000 0xf 0xf8000000 0 0x00010000>;
	pcie@0 {
	ranges = <0x02000000 0 0xe0000000
	0x02000000 0 0xe0000000
	0 0x10000000

	0x01000000 0 0x00000000
	0x01000000 0 0x00000000
	0 0x00010000>;
	};
	};

	pci1: pcie@ffe250000 {
	reg = <0xf 0xfe250000 0 0x10000>;
	ranges = <0x02000000 0 0xe0000000 0xc 0x10000000 0 0x10000000
	0x01000000 0 0x00000000 0xf 0xf8010000 0 0x00010000>;
	pcie@0 {
	ranges = <0x02000000 0 0xe0000000
	0x02000000 0 0xe0000000
	0 0x10000000

	0x01000000 0 0x00000000
	0x01000000 0 0x00000000
	0 0x00010000>;
	};
	};

	pci2: pcie@ffe260000 {
	reg = <0xf 0xfe260000 0 0x10000>;
	ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x10000000
	0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
	pcie@0 {
	ranges = <0x02000000 0 0xe0000000
	0x02000000 0 0xe0000000
	0 0x10000000

	0x01000000 0 0x00000000
	0x01000000 0 0x00000000
	0 0x00010000>;
	};
	};
	};

	#include "t1024si-post.dtsi"