| // SPDX-License-Identifier: GPL-2.0-only |
| /* Copyright (C) 2005 Marc Kleine-Budde, Pengutronix |
| * Copyright (C) 2006 Andrey Volkov, Varma Electronics |
| * Copyright (C) 2008-2009 Wolfgang Grandegger <wg@grandegger.com> |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/slab.h> |
| #include <linux/netdevice.h> |
| #include <linux/if_arp.h> |
| #include <linux/workqueue.h> |
| #include <linux/can.h> |
| #include <linux/can/can-ml.h> |
| #include <linux/can/dev.h> |
| #include <linux/can/skb.h> |
| #include <linux/gpio/consumer.h> |
| #include <linux/of.h> |
| |
| static void can_update_state_error_stats(struct net_device *dev, |
| enum can_state new_state) |
| { |
| struct can_priv *priv = netdev_priv(dev); |
| |
| if (new_state <= priv->state) |
| return; |
| |
| switch (new_state) { |
| case CAN_STATE_ERROR_WARNING: |
| priv->can_stats.error_warning++; |
| break; |
| case CAN_STATE_ERROR_PASSIVE: |
| priv->can_stats.error_passive++; |
| break; |
| case CAN_STATE_BUS_OFF: |
| priv->can_stats.bus_off++; |
| break; |
| default: |
| break; |
| } |
| } |
| |
| static int can_tx_state_to_frame(struct net_device *dev, enum can_state state) |
| { |
| switch (state) { |
| case CAN_STATE_ERROR_ACTIVE: |
| return CAN_ERR_CRTL_ACTIVE; |
| case CAN_STATE_ERROR_WARNING: |
| return CAN_ERR_CRTL_TX_WARNING; |
| case CAN_STATE_ERROR_PASSIVE: |
| return CAN_ERR_CRTL_TX_PASSIVE; |
| default: |
| return 0; |
| } |
| } |
| |
| static int can_rx_state_to_frame(struct net_device *dev, enum can_state state) |
| { |
| switch (state) { |
| case CAN_STATE_ERROR_ACTIVE: |
| return CAN_ERR_CRTL_ACTIVE; |
| case CAN_STATE_ERROR_WARNING: |
| return CAN_ERR_CRTL_RX_WARNING; |
| case CAN_STATE_ERROR_PASSIVE: |
| return CAN_ERR_CRTL_RX_PASSIVE; |
| default: |
| return 0; |
| } |
| } |
| |
| const char *can_get_state_str(const enum can_state state) |
| { |
| switch (state) { |
| case CAN_STATE_ERROR_ACTIVE: |
| return "Error Active"; |
| case CAN_STATE_ERROR_WARNING: |
| return "Error Warning"; |
| case CAN_STATE_ERROR_PASSIVE: |
| return "Error Passive"; |
| case CAN_STATE_BUS_OFF: |
| return "Bus Off"; |
| case CAN_STATE_STOPPED: |
| return "Stopped"; |
| case CAN_STATE_SLEEPING: |
| return "Sleeping"; |
| default: |
| return "<unknown>"; |
| } |
| |
| return "<unknown>"; |
| } |
| EXPORT_SYMBOL_GPL(can_get_state_str); |
| |
| static enum can_state can_state_err_to_state(u16 err) |
| { |
| if (err < CAN_ERROR_WARNING_THRESHOLD) |
| return CAN_STATE_ERROR_ACTIVE; |
| if (err < CAN_ERROR_PASSIVE_THRESHOLD) |
| return CAN_STATE_ERROR_WARNING; |
| if (err < CAN_BUS_OFF_THRESHOLD) |
| return CAN_STATE_ERROR_PASSIVE; |
| |
| return CAN_STATE_BUS_OFF; |
| } |
| |
| void can_state_get_by_berr_counter(const struct net_device *dev, |
| const struct can_berr_counter *bec, |
| enum can_state *tx_state, |
| enum can_state *rx_state) |
| { |
| *tx_state = can_state_err_to_state(bec->txerr); |
| *rx_state = can_state_err_to_state(bec->rxerr); |
| } |
| EXPORT_SYMBOL_GPL(can_state_get_by_berr_counter); |
| |
| void can_change_state(struct net_device *dev, struct can_frame *cf, |
| enum can_state tx_state, enum can_state rx_state) |
| { |
| struct can_priv *priv = netdev_priv(dev); |
| enum can_state new_state = max(tx_state, rx_state); |
| |
| if (unlikely(new_state == priv->state)) { |
| netdev_warn(dev, "%s: oops, state did not change", __func__); |
| return; |
| } |
| |
| netdev_dbg(dev, "Controller changed from %s State (%d) into %s State (%d).\n", |
| can_get_state_str(priv->state), priv->state, |
| can_get_state_str(new_state), new_state); |
| |
| can_update_state_error_stats(dev, new_state); |
| priv->state = new_state; |
| |
| if (!cf) |
| return; |
| |
| if (unlikely(new_state == CAN_STATE_BUS_OFF)) { |
| cf->can_id |= CAN_ERR_BUSOFF; |
| return; |
| } |
| |
| cf->can_id |= CAN_ERR_CRTL; |
| cf->data[1] |= tx_state >= rx_state ? |
| can_tx_state_to_frame(dev, tx_state) : 0; |
| cf->data[1] |= tx_state <= rx_state ? |
| can_rx_state_to_frame(dev, rx_state) : 0; |
| } |
| EXPORT_SYMBOL_GPL(can_change_state); |
| |
| /* CAN device restart for bus-off recovery */ |
| static void can_restart(struct net_device *dev) |
| { |
| struct can_priv *priv = netdev_priv(dev); |
| struct sk_buff *skb; |
| struct can_frame *cf; |
| int err; |
| |
| if (netif_carrier_ok(dev)) |
| netdev_err(dev, "Attempt to restart for bus-off recovery, but carrier is OK?\n"); |
| |
| /* No synchronization needed because the device is bus-off and |
| * no messages can come in or go out. |
| */ |
| can_flush_echo_skb(dev); |
| |
| /* send restart message upstream */ |
| skb = alloc_can_err_skb(dev, &cf); |
| if (skb) { |
| cf->can_id |= CAN_ERR_RESTARTED; |
| netif_rx(skb); |
| } |
| |
| /* Now restart the device */ |
| netif_carrier_on(dev); |
| err = priv->do_set_mode(dev, CAN_MODE_START); |
| if (err) { |
| netdev_err(dev, "Restart failed, error %pe\n", ERR_PTR(err)); |
| netif_carrier_off(dev); |
| } else { |
| netdev_dbg(dev, "Restarted\n"); |
| priv->can_stats.restarts++; |
| } |
| } |
| |
| static void can_restart_work(struct work_struct *work) |
| { |
| struct delayed_work *dwork = to_delayed_work(work); |
| struct can_priv *priv = container_of(dwork, struct can_priv, |
| restart_work); |
| |
| can_restart(priv->dev); |
| } |
| |
| int can_restart_now(struct net_device *dev) |
| { |
| struct can_priv *priv = netdev_priv(dev); |
| |
| /* A manual restart is only permitted if automatic restart is |
| * disabled and the device is in the bus-off state |
| */ |
| if (priv->restart_ms) |
| return -EINVAL; |
| if (priv->state != CAN_STATE_BUS_OFF) |
| return -EBUSY; |
| |
| cancel_delayed_work_sync(&priv->restart_work); |
| can_restart(dev); |
| |
| return 0; |
| } |
| |
| /* CAN bus-off |
| * |
| * This functions should be called when the device goes bus-off to |
| * tell the netif layer that no more packets can be sent or received. |
| * If enabled, a timer is started to trigger bus-off recovery. |
| */ |
| void can_bus_off(struct net_device *dev) |
| { |
| struct can_priv *priv = netdev_priv(dev); |
| |
| if (priv->restart_ms) |
| netdev_info(dev, "bus-off, scheduling restart in %d ms\n", |
| priv->restart_ms); |
| else |
| netdev_info(dev, "bus-off\n"); |
| |
| netif_carrier_off(dev); |
| |
| if (priv->restart_ms) |
| schedule_delayed_work(&priv->restart_work, |
| msecs_to_jiffies(priv->restart_ms)); |
| } |
| EXPORT_SYMBOL_GPL(can_bus_off); |
| |
| void can_setup(struct net_device *dev) |
| { |
| dev->type = ARPHRD_CAN; |
| dev->mtu = CAN_MTU; |
| dev->hard_header_len = 0; |
| dev->addr_len = 0; |
| dev->tx_queue_len = 10; |
| |
| /* New-style flags. */ |
| dev->flags = IFF_NOARP; |
| dev->features = NETIF_F_HW_CSUM; |
| } |
| |
| /* Allocate and setup space for the CAN network device */ |
| struct net_device *alloc_candev_mqs(int sizeof_priv, unsigned int echo_skb_max, |
| unsigned int txqs, unsigned int rxqs) |
| { |
| struct can_ml_priv *can_ml; |
| struct net_device *dev; |
| struct can_priv *priv; |
| int size; |
| |
| /* We put the driver's priv, the CAN mid layer priv and the |
| * echo skb into the netdevice's priv. The memory layout for |
| * the netdev_priv is like this: |
| * |
| * +-------------------------+ |
| * | driver's priv | |
| * +-------------------------+ |
| * | struct can_ml_priv | |
| * +-------------------------+ |
| * | array of struct sk_buff | |
| * +-------------------------+ |
| */ |
| |
| size = ALIGN(sizeof_priv, NETDEV_ALIGN) + sizeof(struct can_ml_priv); |
| |
| if (echo_skb_max) |
| size = ALIGN(size, sizeof(struct sk_buff *)) + |
| echo_skb_max * sizeof(struct sk_buff *); |
| |
| dev = alloc_netdev_mqs(size, "can%d", NET_NAME_UNKNOWN, can_setup, |
| txqs, rxqs); |
| if (!dev) |
| return NULL; |
| |
| priv = netdev_priv(dev); |
| priv->dev = dev; |
| |
| can_ml = (void *)priv + ALIGN(sizeof_priv, NETDEV_ALIGN); |
| can_set_ml_priv(dev, can_ml); |
| |
| if (echo_skb_max) { |
| priv->echo_skb_max = echo_skb_max; |
| priv->echo_skb = (void *)priv + |
| (size - echo_skb_max * sizeof(struct sk_buff *)); |
| } |
| |
| priv->state = CAN_STATE_STOPPED; |
| |
| INIT_DELAYED_WORK(&priv->restart_work, can_restart_work); |
| |
| return dev; |
| } |
| EXPORT_SYMBOL_GPL(alloc_candev_mqs); |
| |
| /* Free space of the CAN network device */ |
| void free_candev(struct net_device *dev) |
| { |
| free_netdev(dev); |
| } |
| EXPORT_SYMBOL_GPL(free_candev); |
| |
| /* changing MTU and control mode for CAN/CANFD devices */ |
| int can_change_mtu(struct net_device *dev, int new_mtu) |
| { |
| struct can_priv *priv = netdev_priv(dev); |
| u32 ctrlmode_static = can_get_static_ctrlmode(priv); |
| |
| /* Do not allow changing the MTU while running */ |
| if (dev->flags & IFF_UP) |
| return -EBUSY; |
| |
| /* allow change of MTU according to the CANFD ability of the device */ |
| switch (new_mtu) { |
| case CAN_MTU: |
| /* 'CANFD-only' controllers can not switch to CAN_MTU */ |
| if (ctrlmode_static & CAN_CTRLMODE_FD) |
| return -EINVAL; |
| |
| priv->ctrlmode &= ~CAN_CTRLMODE_FD; |
| break; |
| |
| case CANFD_MTU: |
| /* check for potential CANFD ability */ |
| if (!(priv->ctrlmode_supported & CAN_CTRLMODE_FD) && |
| !(ctrlmode_static & CAN_CTRLMODE_FD)) |
| return -EINVAL; |
| |
| priv->ctrlmode |= CAN_CTRLMODE_FD; |
| break; |
| |
| default: |
| return -EINVAL; |
| } |
| |
| WRITE_ONCE(dev->mtu, new_mtu); |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(can_change_mtu); |
| |
| /* generic implementation of netdev_ops::ndo_eth_ioctl for CAN devices |
| * supporting hardware timestamps |
| */ |
| int can_eth_ioctl_hwts(struct net_device *netdev, struct ifreq *ifr, int cmd) |
| { |
| struct hwtstamp_config hwts_cfg = { 0 }; |
| |
| switch (cmd) { |
| case SIOCSHWTSTAMP: /* set */ |
| if (copy_from_user(&hwts_cfg, ifr->ifr_data, sizeof(hwts_cfg))) |
| return -EFAULT; |
| if (hwts_cfg.tx_type == HWTSTAMP_TX_ON && |
| hwts_cfg.rx_filter == HWTSTAMP_FILTER_ALL) |
| return 0; |
| return -ERANGE; |
| |
| case SIOCGHWTSTAMP: /* get */ |
| hwts_cfg.tx_type = HWTSTAMP_TX_ON; |
| hwts_cfg.rx_filter = HWTSTAMP_FILTER_ALL; |
| if (copy_to_user(ifr->ifr_data, &hwts_cfg, sizeof(hwts_cfg))) |
| return -EFAULT; |
| return 0; |
| |
| default: |
| return -EOPNOTSUPP; |
| } |
| } |
| EXPORT_SYMBOL(can_eth_ioctl_hwts); |
| |
| /* generic implementation of ethtool_ops::get_ts_info for CAN devices |
| * supporting hardware timestamps |
| */ |
| int can_ethtool_op_get_ts_info_hwts(struct net_device *dev, |
| struct kernel_ethtool_ts_info *info) |
| { |
| info->so_timestamping = |
| SOF_TIMESTAMPING_TX_SOFTWARE | |
| SOF_TIMESTAMPING_TX_HARDWARE | |
| SOF_TIMESTAMPING_RX_HARDWARE | |
| SOF_TIMESTAMPING_RAW_HARDWARE; |
| info->tx_types = BIT(HWTSTAMP_TX_ON); |
| info->rx_filters = BIT(HWTSTAMP_FILTER_ALL); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(can_ethtool_op_get_ts_info_hwts); |
| |
| /* Common open function when the device gets opened. |
| * |
| * This function should be called in the open function of the device |
| * driver. |
| */ |
| int open_candev(struct net_device *dev) |
| { |
| struct can_priv *priv = netdev_priv(dev); |
| |
| if (!priv->bittiming.bitrate) { |
| netdev_err(dev, "bit-timing not yet defined\n"); |
| return -EINVAL; |
| } |
| |
| /* For CAN FD the data bitrate has to be >= the arbitration bitrate */ |
| if ((priv->ctrlmode & CAN_CTRLMODE_FD) && |
| (!priv->data_bittiming.bitrate || |
| priv->data_bittiming.bitrate < priv->bittiming.bitrate)) { |
| netdev_err(dev, "incorrect/missing data bit-timing\n"); |
| return -EINVAL; |
| } |
| |
| /* Switch carrier on if device was stopped while in bus-off state */ |
| if (!netif_carrier_ok(dev)) |
| netif_carrier_on(dev); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(open_candev); |
| |
| #ifdef CONFIG_OF |
| /* Common function that can be used to understand the limitation of |
| * a transceiver when it provides no means to determine these limitations |
| * at runtime. |
| */ |
| void of_can_transceiver(struct net_device *dev) |
| { |
| struct device_node *dn; |
| struct can_priv *priv = netdev_priv(dev); |
| struct device_node *np = dev->dev.parent->of_node; |
| int ret; |
| |
| dn = of_get_child_by_name(np, "can-transceiver"); |
| if (!dn) |
| return; |
| |
| ret = of_property_read_u32(dn, "max-bitrate", &priv->bitrate_max); |
| of_node_put(dn); |
| if ((ret && ret != -EINVAL) || (!ret && !priv->bitrate_max)) |
| netdev_warn(dev, "Invalid value for transceiver max bitrate. Ignoring bitrate limit.\n"); |
| } |
| EXPORT_SYMBOL_GPL(of_can_transceiver); |
| #endif |
| |
| /* Common close function for cleanup before the device gets closed. |
| * |
| * This function should be called in the close function of the device |
| * driver. |
| */ |
| void close_candev(struct net_device *dev) |
| { |
| struct can_priv *priv = netdev_priv(dev); |
| |
| cancel_delayed_work_sync(&priv->restart_work); |
| can_flush_echo_skb(dev); |
| } |
| EXPORT_SYMBOL_GPL(close_candev); |
| |
| static int can_set_termination(struct net_device *ndev, u16 term) |
| { |
| struct can_priv *priv = netdev_priv(ndev); |
| int set; |
| |
| if (term == priv->termination_gpio_ohms[CAN_TERMINATION_GPIO_ENABLED]) |
| set = 1; |
| else |
| set = 0; |
| |
| gpiod_set_value(priv->termination_gpio, set); |
| |
| return 0; |
| } |
| |
| static int can_get_termination(struct net_device *ndev) |
| { |
| struct can_priv *priv = netdev_priv(ndev); |
| struct device *dev = ndev->dev.parent; |
| struct gpio_desc *gpio; |
| u32 term; |
| int ret; |
| |
| /* Disabling termination by default is the safe choice: Else if many |
| * bus participants enable it, no communication is possible at all. |
| */ |
| gpio = devm_gpiod_get_optional(dev, "termination", GPIOD_OUT_LOW); |
| if (IS_ERR(gpio)) |
| return dev_err_probe(dev, PTR_ERR(gpio), |
| "Cannot get termination-gpios\n"); |
| |
| if (!gpio) |
| return 0; |
| |
| ret = device_property_read_u32(dev, "termination-ohms", &term); |
| if (ret) { |
| netdev_err(ndev, "Cannot get termination-ohms: %pe\n", |
| ERR_PTR(ret)); |
| return ret; |
| } |
| |
| if (term > U16_MAX) { |
| netdev_err(ndev, "Invalid termination-ohms value (%u > %u)\n", |
| term, U16_MAX); |
| return -EINVAL; |
| } |
| |
| priv->termination_const_cnt = ARRAY_SIZE(priv->termination_gpio_ohms); |
| priv->termination_const = priv->termination_gpio_ohms; |
| priv->termination_gpio = gpio; |
| priv->termination_gpio_ohms[CAN_TERMINATION_GPIO_DISABLED] = |
| CAN_TERMINATION_DISABLED; |
| priv->termination_gpio_ohms[CAN_TERMINATION_GPIO_ENABLED] = term; |
| priv->do_set_termination = can_set_termination; |
| |
| return 0; |
| } |
| |
| static bool |
| can_bittiming_const_valid(const struct can_bittiming_const *btc) |
| { |
| if (!btc) |
| return true; |
| |
| if (!btc->sjw_max) |
| return false; |
| |
| return true; |
| } |
| |
| /* Register the CAN network device */ |
| int register_candev(struct net_device *dev) |
| { |
| struct can_priv *priv = netdev_priv(dev); |
| int err; |
| |
| /* Ensure termination_const, termination_const_cnt and |
| * do_set_termination consistency. All must be either set or |
| * unset. |
| */ |
| if ((!priv->termination_const != !priv->termination_const_cnt) || |
| (!priv->termination_const != !priv->do_set_termination)) |
| return -EINVAL; |
| |
| if (!priv->bitrate_const != !priv->bitrate_const_cnt) |
| return -EINVAL; |
| |
| if (!priv->data_bitrate_const != !priv->data_bitrate_const_cnt) |
| return -EINVAL; |
| |
| /* We only support either fixed bit rates or bit timing const. */ |
| if ((priv->bitrate_const || priv->data_bitrate_const) && |
| (priv->bittiming_const || priv->data_bittiming_const)) |
| return -EINVAL; |
| |
| if (!can_bittiming_const_valid(priv->bittiming_const) || |
| !can_bittiming_const_valid(priv->data_bittiming_const)) |
| return -EINVAL; |
| |
| if (!priv->termination_const) { |
| err = can_get_termination(dev); |
| if (err) |
| return err; |
| } |
| |
| dev->rtnl_link_ops = &can_link_ops; |
| netif_carrier_off(dev); |
| |
| return register_netdev(dev); |
| } |
| EXPORT_SYMBOL_GPL(register_candev); |
| |
| /* Unregister the CAN network device */ |
| void unregister_candev(struct net_device *dev) |
| { |
| unregister_netdev(dev); |
| } |
| EXPORT_SYMBOL_GPL(unregister_candev); |
| |
| /* Test if a network device is a candev based device |
| * and return the can_priv* if so. |
| */ |
| struct can_priv *safe_candev_priv(struct net_device *dev) |
| { |
| if (dev->type != ARPHRD_CAN || dev->rtnl_link_ops != &can_link_ops) |
| return NULL; |
| |
| return netdev_priv(dev); |
| } |
| EXPORT_SYMBOL_GPL(safe_candev_priv); |
| |
| static __init int can_dev_init(void) |
| { |
| int err; |
| |
| err = can_netlink_register(); |
| if (!err) |
| pr_info("CAN device driver interface\n"); |
| |
| return err; |
| } |
| module_init(can_dev_init); |
| |
| static __exit void can_dev_exit(void) |
| { |
| can_netlink_unregister(); |
| } |
| module_exit(can_dev_exit); |
| |
| MODULE_ALIAS_RTNL_LINK("can"); |