| // SPDX-License-Identifier: GPL-2.0 |
| // LPC interface for ChromeOS Embedded Controller |
| // |
| // Copyright (C) 2012-2015 Google, Inc |
| // |
| // This driver uses the ChromeOS EC byte-level message-based protocol for |
| // communicating the keyboard state (which keys are pressed) from a keyboard EC |
| // to the AP over some bus (such as i2c, lpc, spi). The EC does debouncing, |
| // but everything else (including deghosting) is done here. The main |
| // motivation for this is to keep the EC firmware as simple as possible, since |
| // it cannot be easily upgraded and EC flash/IRAM space is relatively |
| // expensive. |
| |
| #include <linux/acpi.h> |
| #include <linux/dmi.h> |
| #include <linux/delay.h> |
| #include <linux/io.h> |
| #include <linux/interrupt.h> |
| #include <linux/kobject.h> |
| #include <linux/module.h> |
| #include <linux/platform_data/cros_ec_commands.h> |
| #include <linux/platform_data/cros_ec_proto.h> |
| #include <linux/platform_device.h> |
| #include <linux/printk.h> |
| #include <linux/reboot.h> |
| #include <linux/suspend.h> |
| |
| #include "cros_ec.h" |
| #include "cros_ec_lpc_mec.h" |
| |
| #define DRV_NAME "cros_ec_lpcs" |
| #define ACPI_DRV_NAME "GOOG0004" |
| |
| /* True if ACPI device is present */ |
| static bool cros_ec_lpc_acpi_device_found; |
| |
| /* |
| * Indicates that lpc_driver_data.quirk_mmio_memory_base should |
| * be used as the base port for EC mapped memory. |
| */ |
| #define CROS_EC_LPC_QUIRK_REMAP_MEMORY BIT(0) |
| /* |
| * Indicates that lpc_driver_data.quirk_acpi_id should be used to find |
| * the ACPI device. |
| */ |
| #define CROS_EC_LPC_QUIRK_ACPI_ID BIT(1) |
| /* |
| * Indicates that lpc_driver_data.quirk_aml_mutex_name should be used |
| * to find an AML mutex to protect access to Microchip EC. |
| */ |
| #define CROS_EC_LPC_QUIRK_AML_MUTEX BIT(2) |
| |
| /** |
| * struct lpc_driver_data - driver data attached to a DMI device ID to indicate |
| * hardware quirks. |
| * @quirks: a bitfield composed of quirks from CROS_EC_LPC_QUIRK_* |
| * @quirk_mmio_memory_base: The first I/O port addressing EC mapped memory (used |
| * when quirk ...REMAP_MEMORY is set.) |
| * @quirk_acpi_id: An ACPI HID to be used to find the ACPI device. |
| * @quirk_aml_mutex_name: The name of an AML mutex to be used to protect access |
| * to Microchip EC. |
| */ |
| struct lpc_driver_data { |
| u32 quirks; |
| u16 quirk_mmio_memory_base; |
| const char *quirk_acpi_id; |
| const char *quirk_aml_mutex_name; |
| }; |
| |
| /** |
| * struct cros_ec_lpc - LPC device-specific data |
| * @mmio_memory_base: The first I/O port addressing EC mapped memory. |
| */ |
| struct cros_ec_lpc { |
| u16 mmio_memory_base; |
| }; |
| |
| /** |
| * struct lpc_driver_ops - LPC driver operations |
| * @read: Copy length bytes from EC address offset into buffer dest. |
| * Returns a negative error code on error, or the 8-bit checksum |
| * of all bytes read. |
| * @write: Copy length bytes from buffer msg into EC address offset. |
| * Returns a negative error code on error, or the 8-bit checksum |
| * of all bytes written. |
| */ |
| struct lpc_driver_ops { |
| int (*read)(unsigned int offset, unsigned int length, u8 *dest); |
| int (*write)(unsigned int offset, unsigned int length, const u8 *msg); |
| }; |
| |
| static struct lpc_driver_ops cros_ec_lpc_ops = { }; |
| |
| /* |
| * A generic instance of the read function of struct lpc_driver_ops, used for |
| * the LPC EC. |
| */ |
| static int cros_ec_lpc_read_bytes(unsigned int offset, unsigned int length, |
| u8 *dest) |
| { |
| u8 sum = 0; |
| int i; |
| |
| for (i = 0; i < length; ++i) { |
| dest[i] = inb(offset + i); |
| sum += dest[i]; |
| } |
| |
| /* Return checksum of all bytes read */ |
| return sum; |
| } |
| |
| /* |
| * A generic instance of the write function of struct lpc_driver_ops, used for |
| * the LPC EC. |
| */ |
| static int cros_ec_lpc_write_bytes(unsigned int offset, unsigned int length, |
| const u8 *msg) |
| { |
| u8 sum = 0; |
| int i; |
| |
| for (i = 0; i < length; ++i) { |
| outb(msg[i], offset + i); |
| sum += msg[i]; |
| } |
| |
| /* Return checksum of all bytes written */ |
| return sum; |
| } |
| |
| /* |
| * An instance of the read function of struct lpc_driver_ops, used for the |
| * MEC variant of LPC EC. |
| */ |
| static int cros_ec_lpc_mec_read_bytes(unsigned int offset, unsigned int length, |
| u8 *dest) |
| { |
| int in_range = cros_ec_lpc_mec_in_range(offset, length); |
| |
| if (in_range < 0) |
| return in_range; |
| |
| return in_range ? |
| cros_ec_lpc_io_bytes_mec(MEC_IO_READ, |
| offset - EC_HOST_CMD_REGION0, |
| length, dest) : |
| cros_ec_lpc_read_bytes(offset, length, dest); |
| } |
| |
| /* |
| * An instance of the write function of struct lpc_driver_ops, used for the |
| * MEC variant of LPC EC. |
| */ |
| static int cros_ec_lpc_mec_write_bytes(unsigned int offset, unsigned int length, |
| const u8 *msg) |
| { |
| int in_range = cros_ec_lpc_mec_in_range(offset, length); |
| |
| if (in_range < 0) |
| return in_range; |
| |
| return in_range ? |
| cros_ec_lpc_io_bytes_mec(MEC_IO_WRITE, |
| offset - EC_HOST_CMD_REGION0, |
| length, (u8 *)msg) : |
| cros_ec_lpc_write_bytes(offset, length, msg); |
| } |
| |
| static int ec_response_timed_out(void) |
| { |
| unsigned long one_second = jiffies + HZ; |
| u8 data; |
| int ret; |
| |
| usleep_range(200, 300); |
| do { |
| ret = cros_ec_lpc_ops.read(EC_LPC_ADDR_HOST_CMD, 1, &data); |
| if (ret < 0) |
| return ret; |
| if (!(data & EC_LPC_STATUS_BUSY_MASK)) |
| return 0; |
| usleep_range(100, 200); |
| } while (time_before(jiffies, one_second)); |
| |
| return 1; |
| } |
| |
| static int cros_ec_pkt_xfer_lpc(struct cros_ec_device *ec, |
| struct cros_ec_command *msg) |
| { |
| struct ec_host_response response; |
| u8 sum; |
| int ret = 0; |
| u8 *dout; |
| |
| ret = cros_ec_prepare_tx(ec, msg); |
| if (ret < 0) |
| goto done; |
| |
| /* Write buffer */ |
| ret = cros_ec_lpc_ops.write(EC_LPC_ADDR_HOST_PACKET, ret, ec->dout); |
| if (ret < 0) |
| goto done; |
| |
| /* Here we go */ |
| sum = EC_COMMAND_PROTOCOL_3; |
| ret = cros_ec_lpc_ops.write(EC_LPC_ADDR_HOST_CMD, 1, &sum); |
| if (ret < 0) |
| goto done; |
| |
| ret = ec_response_timed_out(); |
| if (ret < 0) |
| goto done; |
| if (ret) { |
| dev_warn(ec->dev, "EC response timed out\n"); |
| ret = -EIO; |
| goto done; |
| } |
| |
| /* Check result */ |
| ret = cros_ec_lpc_ops.read(EC_LPC_ADDR_HOST_DATA, 1, &sum); |
| if (ret < 0) |
| goto done; |
| msg->result = ret; |
| ret = cros_ec_check_result(ec, msg); |
| if (ret) |
| goto done; |
| |
| /* Read back response */ |
| dout = (u8 *)&response; |
| ret = cros_ec_lpc_ops.read(EC_LPC_ADDR_HOST_PACKET, sizeof(response), |
| dout); |
| if (ret < 0) |
| goto done; |
| sum = ret; |
| |
| msg->result = response.result; |
| |
| if (response.data_len > msg->insize) { |
| dev_err(ec->dev, |
| "packet too long (%d bytes, expected %d)", |
| response.data_len, msg->insize); |
| ret = -EMSGSIZE; |
| goto done; |
| } |
| |
| /* Read response and process checksum */ |
| ret = cros_ec_lpc_ops.read(EC_LPC_ADDR_HOST_PACKET + |
| sizeof(response), response.data_len, |
| msg->data); |
| if (ret < 0) |
| goto done; |
| sum += ret; |
| |
| if (sum) { |
| dev_err(ec->dev, |
| "bad packet checksum %02x\n", |
| response.checksum); |
| ret = -EBADMSG; |
| goto done; |
| } |
| |
| /* Return actual amount of data received */ |
| ret = response.data_len; |
| done: |
| return ret; |
| } |
| |
| static int cros_ec_cmd_xfer_lpc(struct cros_ec_device *ec, |
| struct cros_ec_command *msg) |
| { |
| struct ec_lpc_host_args args; |
| u8 sum; |
| int ret = 0; |
| |
| if (msg->outsize > EC_PROTO2_MAX_PARAM_SIZE || |
| msg->insize > EC_PROTO2_MAX_PARAM_SIZE) { |
| dev_err(ec->dev, |
| "invalid buffer sizes (out %d, in %d)\n", |
| msg->outsize, msg->insize); |
| return -EINVAL; |
| } |
| |
| /* Now actually send the command to the EC and get the result */ |
| args.flags = EC_HOST_ARGS_FLAG_FROM_HOST; |
| args.command_version = msg->version; |
| args.data_size = msg->outsize; |
| |
| /* Initialize checksum */ |
| sum = msg->command + args.flags + args.command_version + args.data_size; |
| |
| /* Copy data and update checksum */ |
| ret = cros_ec_lpc_ops.write(EC_LPC_ADDR_HOST_PARAM, msg->outsize, |
| msg->data); |
| if (ret < 0) |
| goto done; |
| sum += ret; |
| |
| /* Finalize checksum and write args */ |
| args.checksum = sum; |
| ret = cros_ec_lpc_ops.write(EC_LPC_ADDR_HOST_ARGS, sizeof(args), |
| (u8 *)&args); |
| if (ret < 0) |
| goto done; |
| |
| /* Here we go */ |
| sum = msg->command; |
| ret = cros_ec_lpc_ops.write(EC_LPC_ADDR_HOST_CMD, 1, &sum); |
| if (ret < 0) |
| goto done; |
| |
| ret = ec_response_timed_out(); |
| if (ret < 0) |
| goto done; |
| if (ret) { |
| dev_warn(ec->dev, "EC response timed out\n"); |
| ret = -EIO; |
| goto done; |
| } |
| |
| /* Check result */ |
| ret = cros_ec_lpc_ops.read(EC_LPC_ADDR_HOST_DATA, 1, &sum); |
| if (ret < 0) |
| goto done; |
| msg->result = ret; |
| ret = cros_ec_check_result(ec, msg); |
| if (ret) |
| goto done; |
| |
| /* Read back args */ |
| ret = cros_ec_lpc_ops.read(EC_LPC_ADDR_HOST_ARGS, sizeof(args), (u8 *)&args); |
| if (ret < 0) |
| goto done; |
| |
| if (args.data_size > msg->insize) { |
| dev_err(ec->dev, |
| "packet too long (%d bytes, expected %d)", |
| args.data_size, msg->insize); |
| ret = -ENOSPC; |
| goto done; |
| } |
| |
| /* Start calculating response checksum */ |
| sum = msg->command + args.flags + args.command_version + args.data_size; |
| |
| /* Read response and update checksum */ |
| ret = cros_ec_lpc_ops.read(EC_LPC_ADDR_HOST_PARAM, args.data_size, |
| msg->data); |
| if (ret < 0) |
| goto done; |
| sum += ret; |
| |
| /* Verify checksum */ |
| if (args.checksum != sum) { |
| dev_err(ec->dev, |
| "bad packet checksum, expected %02x, got %02x\n", |
| args.checksum, sum); |
| ret = -EBADMSG; |
| goto done; |
| } |
| |
| /* Return actual amount of data received */ |
| ret = args.data_size; |
| done: |
| return ret; |
| } |
| |
| /* Returns num bytes read, or negative on error. Doesn't need locking. */ |
| static int cros_ec_lpc_readmem(struct cros_ec_device *ec, unsigned int offset, |
| unsigned int bytes, void *dest) |
| { |
| struct cros_ec_lpc *ec_lpc = ec->priv; |
| int i = offset; |
| char *s = dest; |
| int cnt = 0; |
| int ret; |
| |
| if (offset >= EC_MEMMAP_SIZE - bytes) |
| return -EINVAL; |
| |
| /* fixed length */ |
| if (bytes) { |
| ret = cros_ec_lpc_ops.read(ec_lpc->mmio_memory_base + offset, bytes, s); |
| if (ret < 0) |
| return ret; |
| return bytes; |
| } |
| |
| /* string */ |
| for (; i < EC_MEMMAP_SIZE; i++, s++) { |
| ret = cros_ec_lpc_ops.read(ec_lpc->mmio_memory_base + i, 1, s); |
| if (ret < 0) |
| return ret; |
| cnt++; |
| if (!*s) |
| break; |
| } |
| |
| return cnt; |
| } |
| |
| static void cros_ec_lpc_acpi_notify(acpi_handle device, u32 value, void *data) |
| { |
| static const char *env[] = { "ERROR=PANIC", NULL }; |
| struct cros_ec_device *ec_dev = data; |
| bool ec_has_more_events; |
| int ret; |
| |
| ec_dev->last_event_time = cros_ec_get_time_ns(); |
| |
| if (value == ACPI_NOTIFY_CROS_EC_PANIC) { |
| dev_emerg(ec_dev->dev, "CrOS EC Panic Reported. Shutdown is imminent!"); |
| blocking_notifier_call_chain(&ec_dev->panic_notifier, 0, ec_dev); |
| kobject_uevent_env(&ec_dev->dev->kobj, KOBJ_CHANGE, (char **)env); |
| /* Begin orderly shutdown. EC will force reset after a short period. */ |
| hw_protection_shutdown("CrOS EC Panic", -1); |
| /* Do not query for other events after a panic is reported */ |
| return; |
| } |
| |
| if (ec_dev->mkbp_event_supported) |
| do { |
| ret = cros_ec_get_next_event(ec_dev, NULL, |
| &ec_has_more_events); |
| if (ret > 0) |
| blocking_notifier_call_chain( |
| &ec_dev->event_notifier, 0, |
| ec_dev); |
| } while (ec_has_more_events); |
| |
| if (value == ACPI_NOTIFY_DEVICE_WAKE) |
| pm_system_wakeup(); |
| } |
| |
| static acpi_status cros_ec_lpc_parse_device(acpi_handle handle, u32 level, |
| void *context, void **retval) |
| { |
| *(struct acpi_device **)context = acpi_fetch_acpi_dev(handle); |
| return AE_CTRL_TERMINATE; |
| } |
| |
| static struct acpi_device *cros_ec_lpc_get_device(const char *id) |
| { |
| struct acpi_device *adev = NULL; |
| acpi_status status = acpi_get_devices(id, cros_ec_lpc_parse_device, |
| &adev, NULL); |
| if (ACPI_FAILURE(status)) { |
| pr_warn(DRV_NAME ": Looking for %s failed\n", id); |
| return NULL; |
| } |
| |
| return adev; |
| } |
| |
| static int cros_ec_lpc_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct acpi_device *adev; |
| acpi_status status; |
| struct cros_ec_device *ec_dev; |
| struct cros_ec_lpc *ec_lpc; |
| struct lpc_driver_data *driver_data; |
| u8 buf[2] = {}; |
| int irq, ret; |
| u32 quirks; |
| |
| ec_lpc = devm_kzalloc(dev, sizeof(*ec_lpc), GFP_KERNEL); |
| if (!ec_lpc) |
| return -ENOMEM; |
| |
| ec_lpc->mmio_memory_base = EC_LPC_ADDR_MEMMAP; |
| |
| driver_data = platform_get_drvdata(pdev); |
| if (driver_data) { |
| quirks = driver_data->quirks; |
| |
| if (quirks) |
| dev_info(dev, "loaded with quirks %8.08x\n", quirks); |
| |
| if (quirks & CROS_EC_LPC_QUIRK_REMAP_MEMORY) |
| ec_lpc->mmio_memory_base = driver_data->quirk_mmio_memory_base; |
| |
| if (quirks & CROS_EC_LPC_QUIRK_ACPI_ID) { |
| adev = cros_ec_lpc_get_device(driver_data->quirk_acpi_id); |
| if (!adev) { |
| dev_err(dev, "failed to get ACPI device '%s'", |
| driver_data->quirk_acpi_id); |
| return -ENODEV; |
| } |
| ACPI_COMPANION_SET(dev, adev); |
| } |
| |
| if (quirks & CROS_EC_LPC_QUIRK_AML_MUTEX) { |
| const char *name |
| = driver_data->quirk_aml_mutex_name; |
| ret = cros_ec_lpc_mec_acpi_mutex(ACPI_COMPANION(dev), name); |
| if (ret) { |
| dev_err(dev, "failed to get AML mutex '%s'", name); |
| return ret; |
| } |
| dev_info(dev, "got AML mutex '%s'", name); |
| } |
| } |
| |
| /* |
| * The Framework Laptop (and possibly other non-ChromeOS devices) |
| * only exposes the eight I/O ports that are required for the Microchip EC. |
| * Requesting a larger reservation will fail. |
| */ |
| if (!devm_request_region(dev, EC_HOST_CMD_REGION0, |
| EC_HOST_CMD_MEC_REGION_SIZE, dev_name(dev))) { |
| dev_err(dev, "couldn't reserve MEC region\n"); |
| return -EBUSY; |
| } |
| |
| cros_ec_lpc_mec_init(EC_HOST_CMD_REGION0, |
| EC_LPC_ADDR_MEMMAP + EC_MEMMAP_SIZE); |
| |
| /* |
| * Read the mapped ID twice, the first one is assuming the |
| * EC is a Microchip Embedded Controller (MEC) variant, if the |
| * protocol fails, fallback to the non MEC variant and try to |
| * read again the ID. |
| */ |
| cros_ec_lpc_ops.read = cros_ec_lpc_mec_read_bytes; |
| cros_ec_lpc_ops.write = cros_ec_lpc_mec_write_bytes; |
| ret = cros_ec_lpc_ops.read(EC_LPC_ADDR_MEMMAP + EC_MEMMAP_ID, 2, buf); |
| if (ret < 0) |
| return ret; |
| if (buf[0] != 'E' || buf[1] != 'C') { |
| if (!devm_request_region(dev, ec_lpc->mmio_memory_base, EC_MEMMAP_SIZE, |
| dev_name(dev))) { |
| dev_err(dev, "couldn't reserve memmap region\n"); |
| return -EBUSY; |
| } |
| |
| /* Re-assign read/write operations for the non MEC variant */ |
| cros_ec_lpc_ops.read = cros_ec_lpc_read_bytes; |
| cros_ec_lpc_ops.write = cros_ec_lpc_write_bytes; |
| ret = cros_ec_lpc_ops.read(ec_lpc->mmio_memory_base + EC_MEMMAP_ID, 2, |
| buf); |
| if (ret < 0) |
| return ret; |
| if (buf[0] != 'E' || buf[1] != 'C') { |
| dev_err(dev, "EC ID not detected\n"); |
| return -ENODEV; |
| } |
| |
| /* Reserve the remaining I/O ports required by the non-MEC protocol. */ |
| if (!devm_request_region(dev, EC_HOST_CMD_REGION0 + EC_HOST_CMD_MEC_REGION_SIZE, |
| EC_HOST_CMD_REGION_SIZE - EC_HOST_CMD_MEC_REGION_SIZE, |
| dev_name(dev))) { |
| dev_err(dev, "couldn't reserve remainder of region0\n"); |
| return -EBUSY; |
| } |
| if (!devm_request_region(dev, EC_HOST_CMD_REGION1, |
| EC_HOST_CMD_REGION_SIZE, dev_name(dev))) { |
| dev_err(dev, "couldn't reserve region1\n"); |
| return -EBUSY; |
| } |
| } |
| |
| ec_dev = devm_kzalloc(dev, sizeof(*ec_dev), GFP_KERNEL); |
| if (!ec_dev) |
| return -ENOMEM; |
| |
| platform_set_drvdata(pdev, ec_dev); |
| ec_dev->dev = dev; |
| ec_dev->phys_name = dev_name(dev); |
| ec_dev->cmd_xfer = cros_ec_cmd_xfer_lpc; |
| ec_dev->pkt_xfer = cros_ec_pkt_xfer_lpc; |
| ec_dev->cmd_readmem = cros_ec_lpc_readmem; |
| ec_dev->din_size = sizeof(struct ec_host_response) + |
| sizeof(struct ec_response_get_protocol_info); |
| ec_dev->dout_size = sizeof(struct ec_host_request); |
| ec_dev->priv = ec_lpc; |
| |
| /* |
| * Some boards do not have an IRQ allotted for cros_ec_lpc, |
| * which makes ENXIO an expected (and safe) scenario. |
| */ |
| irq = platform_get_irq_optional(pdev, 0); |
| if (irq > 0) |
| ec_dev->irq = irq; |
| else if (irq != -ENXIO) { |
| dev_err(dev, "couldn't retrieve IRQ number (%d)\n", irq); |
| return irq; |
| } |
| |
| ret = cros_ec_register(ec_dev); |
| if (ret) { |
| dev_err(dev, "couldn't register ec_dev (%d)\n", ret); |
| return ret; |
| } |
| |
| /* |
| * Connect a notify handler to process MKBP messages if we have a |
| * companion ACPI device. |
| */ |
| adev = ACPI_COMPANION(dev); |
| if (adev) { |
| status = acpi_install_notify_handler(adev->handle, |
| ACPI_ALL_NOTIFY, |
| cros_ec_lpc_acpi_notify, |
| ec_dev); |
| if (ACPI_FAILURE(status)) |
| dev_warn(dev, "Failed to register notifier %08x\n", |
| status); |
| } |
| |
| return 0; |
| } |
| |
| static void cros_ec_lpc_remove(struct platform_device *pdev) |
| { |
| struct cros_ec_device *ec_dev = platform_get_drvdata(pdev); |
| struct acpi_device *adev; |
| |
| adev = ACPI_COMPANION(&pdev->dev); |
| if (adev) |
| acpi_remove_notify_handler(adev->handle, ACPI_ALL_NOTIFY, |
| cros_ec_lpc_acpi_notify); |
| |
| cros_ec_unregister(ec_dev); |
| } |
| |
| static const struct acpi_device_id cros_ec_lpc_acpi_device_ids[] = { |
| { ACPI_DRV_NAME, 0 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(acpi, cros_ec_lpc_acpi_device_ids); |
| |
| static const struct lpc_driver_data framework_laptop_npcx_lpc_driver_data __initconst = { |
| .quirks = CROS_EC_LPC_QUIRK_REMAP_MEMORY, |
| .quirk_mmio_memory_base = 0xE00, |
| }; |
| |
| static const struct lpc_driver_data framework_laptop_mec_lpc_driver_data __initconst = { |
| .quirks = CROS_EC_LPC_QUIRK_ACPI_ID|CROS_EC_LPC_QUIRK_AML_MUTEX, |
| .quirk_acpi_id = "PNP0C09", |
| .quirk_aml_mutex_name = "ECMT", |
| }; |
| |
| static const struct dmi_system_id cros_ec_lpc_dmi_table[] __initconst = { |
| { |
| /* |
| * Today all Chromebooks/boxes ship with Google_* as version and |
| * coreboot as bios vendor. No other systems with this |
| * combination are known to date. |
| */ |
| .matches = { |
| DMI_MATCH(DMI_BIOS_VENDOR, "coreboot"), |
| DMI_MATCH(DMI_BIOS_VERSION, "Google_"), |
| }, |
| }, |
| { |
| /* |
| * If the box is running custom coreboot firmware then the |
| * DMI BIOS version string will not be matched by "Google_", |
| * but the system vendor string will still be matched by |
| * "GOOGLE". |
| */ |
| .matches = { |
| DMI_MATCH(DMI_BIOS_VENDOR, "coreboot"), |
| DMI_MATCH(DMI_SYS_VENDOR, "GOOGLE"), |
| }, |
| }, |
| { |
| /* x86-link, the Chromebook Pixel. */ |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "GOOGLE"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "Link"), |
| }, |
| }, |
| { |
| /* x86-samus, the Chromebook Pixel 2. */ |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "GOOGLE"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "Samus"), |
| }, |
| }, |
| { |
| /* x86-peppy, the Acer C720 Chromebook. */ |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Acer"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "Peppy"), |
| }, |
| }, |
| { |
| /* x86-glimmer, the Lenovo Thinkpad Yoga 11e. */ |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "GOOGLE"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "Glimmer"), |
| }, |
| }, |
| /* A small number of non-Chromebook/box machines also use the ChromeOS EC */ |
| { |
| /* Framework Laptop (11th Gen Intel Core) */ |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Framework"), |
| DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Laptop"), |
| }, |
| .driver_data = (void *)&framework_laptop_mec_lpc_driver_data, |
| }, |
| { |
| /* Framework Laptop (12th Gen Intel Core) */ |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Framework"), |
| DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "12th Gen Intel Core"), |
| }, |
| .driver_data = (void *)&framework_laptop_mec_lpc_driver_data, |
| }, |
| { |
| /* Framework Laptop (13th Gen Intel Core) */ |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Framework"), |
| DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "13th Gen Intel Core"), |
| }, |
| .driver_data = (void *)&framework_laptop_mec_lpc_driver_data, |
| }, |
| { |
| /* |
| * All remaining Framework Laptop models (13 AMD Ryzen, 16 AMD |
| * Ryzen, Intel Core Ultra) |
| */ |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Framework"), |
| DMI_MATCH(DMI_PRODUCT_FAMILY, "Laptop"), |
| }, |
| .driver_data = (void *)&framework_laptop_npcx_lpc_driver_data, |
| }, |
| { /* sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(dmi, cros_ec_lpc_dmi_table); |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int cros_ec_lpc_prepare(struct device *dev) |
| { |
| struct cros_ec_device *ec_dev = dev_get_drvdata(dev); |
| return cros_ec_suspend_prepare(ec_dev); |
| } |
| |
| static void cros_ec_lpc_complete(struct device *dev) |
| { |
| struct cros_ec_device *ec_dev = dev_get_drvdata(dev); |
| cros_ec_resume_complete(ec_dev); |
| } |
| |
| static int cros_ec_lpc_suspend_late(struct device *dev) |
| { |
| struct cros_ec_device *ec_dev = dev_get_drvdata(dev); |
| |
| return cros_ec_suspend_late(ec_dev); |
| } |
| |
| static int cros_ec_lpc_resume_early(struct device *dev) |
| { |
| struct cros_ec_device *ec_dev = dev_get_drvdata(dev); |
| |
| return cros_ec_resume_early(ec_dev); |
| } |
| #endif |
| |
| static const struct dev_pm_ops cros_ec_lpc_pm_ops = { |
| #ifdef CONFIG_PM_SLEEP |
| .prepare = cros_ec_lpc_prepare, |
| .complete = cros_ec_lpc_complete, |
| #endif |
| SET_LATE_SYSTEM_SLEEP_PM_OPS(cros_ec_lpc_suspend_late, cros_ec_lpc_resume_early) |
| }; |
| |
| static struct platform_driver cros_ec_lpc_driver = { |
| .driver = { |
| .name = DRV_NAME, |
| .acpi_match_table = cros_ec_lpc_acpi_device_ids, |
| .pm = &cros_ec_lpc_pm_ops, |
| /* |
| * ACPI child devices may probe before us, and they racily |
| * check our drvdata pointer. Force synchronous probe until |
| * those races are resolved. |
| */ |
| .probe_type = PROBE_FORCE_SYNCHRONOUS, |
| }, |
| .probe = cros_ec_lpc_probe, |
| .remove_new = cros_ec_lpc_remove, |
| }; |
| |
| static struct platform_device cros_ec_lpc_device = { |
| .name = DRV_NAME |
| }; |
| |
| static int __init cros_ec_lpc_init(void) |
| { |
| int ret; |
| const struct dmi_system_id *dmi_match; |
| |
| cros_ec_lpc_acpi_device_found = !!cros_ec_lpc_get_device(ACPI_DRV_NAME); |
| |
| dmi_match = dmi_first_match(cros_ec_lpc_dmi_table); |
| |
| if (!cros_ec_lpc_acpi_device_found && !dmi_match) { |
| pr_err(DRV_NAME ": unsupported system.\n"); |
| return -ENODEV; |
| } |
| |
| /* Register the driver */ |
| ret = platform_driver_register(&cros_ec_lpc_driver); |
| if (ret) { |
| pr_err(DRV_NAME ": can't register driver: %d\n", ret); |
| return ret; |
| } |
| |
| if (!cros_ec_lpc_acpi_device_found) { |
| /* Pass the DMI match's driver data down to the platform device */ |
| platform_set_drvdata(&cros_ec_lpc_device, dmi_match->driver_data); |
| |
| /* Register the device, and it'll get hooked up automatically */ |
| ret = platform_device_register(&cros_ec_lpc_device); |
| if (ret) { |
| pr_err(DRV_NAME ": can't register device: %d\n", ret); |
| platform_driver_unregister(&cros_ec_lpc_driver); |
| } |
| } |
| |
| return ret; |
| } |
| |
| static void __exit cros_ec_lpc_exit(void) |
| { |
| if (!cros_ec_lpc_acpi_device_found) |
| platform_device_unregister(&cros_ec_lpc_device); |
| platform_driver_unregister(&cros_ec_lpc_driver); |
| } |
| |
| module_init(cros_ec_lpc_init); |
| module_exit(cros_ec_lpc_exit); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_DESCRIPTION("ChromeOS EC LPC driver"); |