drivers/platform/chrome/cros_ec_uart.c - linux - Git at Google

 // SPDX-License-Identifier: GPL-2.0-only
 /*
  * UART interface for ChromeOS Embedded Controller
  *
  * Copyright 2020-2022 Google LLC.
  */

 #include <linux/acpi.h>
 #include <linux/delay.h>
 #include <linux/errno.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/platform_data/cros_ec_proto.h>
 #include <linux/serdev.h>
 #include <linux/slab.h>
 #include <uapi/linux/sched/types.h>

 #include "cros_ec.h"

 /*
  * EC sends contiguous bytes of response packet on UART AP RX.
  * TTY driver in AP accumulates incoming bytes and calls the registered callback
  * function. Byte count can range from 1 to MAX bytes supported by EC.
  * This driver should wait for long time for all callbacks to be processed.
  * Considering the worst case scenario, wait for 500 msec. This timeout should
  * account for max latency and some additional guard time.
  * Best case: Entire packet is received in ~200 ms, wait queue will be released
  * and packet will be processed.
  * Worst case: TTY driver sends bytes in multiple callbacks. In this case this
  * driver will wait for ~1 sec beyond which it will timeout.
  * This timeout value should not exceed ~500 msec because in case if
  * EC_CMD_REBOOT_EC sent, high level driver should be able to intercept EC
  * in RO.
  */
 #define EC_MSG_DEADLINE_MS		500

 /**
  * struct response_info - Encapsulate EC response related
  *			information for passing between function
  *			cros_ec_uart_pkt_xfer() and cros_ec_uart_rx_bytes()
  *			callback.
  * @data:		Copy the data received from EC here.
  * @max_size:		Max size allocated for the @data buffer. If the
  *			received data exceeds this value, we log an error.
  * @size:		Actual size of data received from EC. This is also
  *			used to accumulate byte count with response is received
  *			in dma chunks.
  * @exp_len:		Expected bytes of response from EC including header.
  * @status:		Re-init to 0 before sending a cmd. Updated to 1 when
  *			a response is successfully received, or an error number
  *			on failure.
  * @wait_queue:	Wait queue EC response where the cros_ec sends request
  *			to EC and waits
  */
 struct response_info {
 	void *data;
 	size_t max_size;
 	size_t size;
 	size_t exp_len;
 	int status;
 	wait_queue_head_t wait_queue;
 };

 /**
  * struct cros_ec_uart - information about a uart-connected EC
  *
  * @serdev:		serdev uart device we are connected to.
  * @baudrate:		UART baudrate of attached EC device.
  * @flowcontrol:	UART flowcontrol of attached device.
  * @irq:		Linux IRQ number of associated serial device.
  * @response:		Response info passing between cros_ec_uart_pkt_xfer()
  *			and cros_ec_uart_rx_bytes()
  */
 struct cros_ec_uart {
 	struct serdev_device *serdev;
 	u32 baudrate;
 	u8 flowcontrol;
 	u32 irq;
 	struct response_info response;
 };

 static size_t cros_ec_uart_rx_bytes(struct serdev_device *serdev,
 				    const u8 *data, size_t count)
 {
 	struct ec_host_response *host_response;
 	struct cros_ec_device *ec_dev = serdev_device_get_drvdata(serdev);
 	struct cros_ec_uart *ec_uart = ec_dev->priv;
 	struct response_info *resp = &ec_uart->response;

 	/* Check if bytes were sent out of band */
 	if (!resp->data) {
 		/* Discard all bytes */
 		dev_warn(ec_dev->dev, "Bytes received out of band, dropping them.\n");
 		return count;
 	}

 	/*
 	 * Check if incoming bytes + resp->size is greater than allocated
 	 * buffer in din by cros_ec. This will ensure that if EC sends more
 	 * bytes than max_size, waiting process will be notified with an error.
 	 */
 	if (resp->size + count > resp->max_size) {
 		resp->status = -EMSGSIZE;
 		wake_up(&resp->wait_queue);
 		return count;
 	}

 	memcpy(resp->data + resp->size, data, count);

 	resp->size += count;

 	/* Read data_len if we received response header and if exp_len was not read before. */
 	if (resp->size >= sizeof(*host_response) && resp->exp_len == 0) {
 		host_response = (struct ec_host_response *)resp->data;
 		resp->exp_len = host_response->data_len + sizeof(*host_response);
 	}

 	/* If driver received response header and payload from EC, wake up the wait queue. */
 	if (resp->size >= sizeof(*host_response) && resp->size == resp->exp_len) {
 		resp->status = 1;
 		wake_up(&resp->wait_queue);
 	}

 	return count;
 }

 static int cros_ec_uart_pkt_xfer(struct cros_ec_device *ec_dev,
 				 struct cros_ec_command *ec_msg)
 {
 	struct cros_ec_uart *ec_uart = ec_dev->priv;
 	struct serdev_device *serdev = ec_uart->serdev;
 	struct response_info *resp = &ec_uart->response;
 	struct ec_host_response *host_response;
 	unsigned int len;
 	int ret, i;
 	u8 sum;

 	len = cros_ec_prepare_tx(ec_dev, ec_msg);
 	dev_dbg(ec_dev->dev, "Prepared len=%d\n", len);

 	/* Setup for incoming response */
 	resp->data = ec_dev->din;
 	resp->max_size = ec_dev->din_size;
 	resp->size = 0;
 	resp->exp_len = 0;
 	resp->status = 0;

 	ret = serdev_device_write_buf(serdev, ec_dev->dout, len);
 	if (ret < 0 || ret < len) {
 		dev_err(ec_dev->dev, "Unable to write data\n");
 		if (ret >= 0)
 			ret = -EIO;
 		goto exit;
 	}

 	ret = wait_event_timeout(resp->wait_queue, resp->status,
 				 msecs_to_jiffies(EC_MSG_DEADLINE_MS));
 	if (ret == 0) {
 		dev_warn(ec_dev->dev, "Timed out waiting for response.\n");
 		ret = -ETIMEDOUT;
 		goto exit;
 	}

 	if (resp->status < 0) {
 		ret = resp->status;
 		dev_warn(ec_dev->dev, "Error response received: %d\n", ret);
 		goto exit;
 	}

 	host_response = (struct ec_host_response *)ec_dev->din;
 	ec_msg->result = host_response->result;

 	if (host_response->data_len > ec_msg->insize) {
 		dev_err(ec_dev->dev, "Resp too long (%d bytes, expected %d)\n",
 			host_response->data_len, ec_msg->insize);
 		ret = -ENOSPC;
 		goto exit;
 	}

 	/* Validate checksum */
 	sum = 0;
 	for (i = 0; i < sizeof(*host_response) + host_response->data_len; i++)
 		sum += ec_dev->din[i];

 	if (sum) {
 		dev_err(ec_dev->dev, "Bad packet checksum calculated %x\n", sum);
 		ret = -EBADMSG;
 		goto exit;
 	}

 	memcpy(ec_msg->data, ec_dev->din + sizeof(*host_response), host_response->data_len);

 	ret = host_response->data_len;

 exit:
 	/* Invalidate response buffer to guard against out of band rx data */
 	resp->data = NULL;

 	if (ec_msg->command == EC_CMD_REBOOT_EC)
 		msleep(EC_REBOOT_DELAY_MS);

 	return ret;
 }

 static int cros_ec_uart_resource(struct acpi_resource *ares, void *data)
 {
 	struct cros_ec_uart *ec_uart = data;
 	struct acpi_resource_uart_serialbus *sb = &ares->data.uart_serial_bus;

 	if (ares->type == ACPI_RESOURCE_TYPE_SERIAL_BUS &&
 	    sb->type == ACPI_RESOURCE_SERIAL_TYPE_UART) {
 		ec_uart->baudrate = sb->default_baud_rate;
 		dev_dbg(&ec_uart->serdev->dev, "Baudrate %d\n", ec_uart->baudrate);

 		ec_uart->flowcontrol = sb->flow_control;
 		dev_dbg(&ec_uart->serdev->dev, "Flow control %d\n", ec_uart->flowcontrol);
 	}

 	return 0;
 }

 static int cros_ec_uart_acpi_probe(struct cros_ec_uart *ec_uart)
 {
 	int ret;
 	LIST_HEAD(resources);
 	struct acpi_device *adev = ACPI_COMPANION(&ec_uart->serdev->dev);

 	ret = acpi_dev_get_resources(adev, &resources, cros_ec_uart_resource, ec_uart);
 	if (ret < 0)
 		return ret;

 	acpi_dev_free_resource_list(&resources);

 	/* Retrieve GpioInt and translate it to Linux IRQ number */
 	ret = acpi_dev_gpio_irq_get(adev, 0);
 	if (ret < 0)
 		return ret;

 	ec_uart->irq = ret;
 	dev_dbg(&ec_uart->serdev->dev, "IRQ number %d\n", ec_uart->irq);

 	return 0;
 }

 static const struct serdev_device_ops cros_ec_uart_client_ops = {
 	.receive_buf = cros_ec_uart_rx_bytes,
 };

 static int cros_ec_uart_probe(struct serdev_device *serdev)
 {
 	struct device *dev = &serdev->dev;
 	struct cros_ec_device *ec_dev;
 	struct cros_ec_uart *ec_uart;
 	int ret;

 	ec_uart = devm_kzalloc(dev, sizeof(*ec_uart), GFP_KERNEL);
 	if (!ec_uart)
 		return -ENOMEM;

 	ec_dev = devm_kzalloc(dev, sizeof(*ec_dev), GFP_KERNEL);
 	if (!ec_dev)
 		return -ENOMEM;

 	serdev_device_set_drvdata(serdev, ec_dev);
 	init_waitqueue_head(&ec_uart->response.wait_queue);

 	ec_uart->serdev = serdev;

 	ret = cros_ec_uart_acpi_probe(ec_uart);
 	if (ret < 0) {
 		dev_err(dev, "Failed to get ACPI info (%d)", ret);
 		return ret;
 	}

 	/* Initialize ec_dev for cros_ec  */
 	ec_dev->phys_name = dev_name(dev);
 	ec_dev->dev = dev;
 	ec_dev->priv = ec_uart;
 	ec_dev->irq = ec_uart->irq;
 	ec_dev->cmd_xfer = NULL;
 	ec_dev->pkt_xfer = cros_ec_uart_pkt_xfer;
 	ec_dev->din_size = sizeof(struct ec_host_response) +
 			   sizeof(struct ec_response_get_protocol_info);
 	ec_dev->dout_size = sizeof(struct ec_host_request);

 	serdev_device_set_client_ops(serdev, &cros_ec_uart_client_ops);

 	ret = devm_serdev_device_open(dev, serdev);
 	if (ret) {
 		dev_err(dev, "Unable to open UART device");
 		return ret;
 	}

 	ret = serdev_device_set_baudrate(serdev, ec_uart->baudrate);
 	if (ret < 0) {
 		dev_err(dev, "Failed to set up host baud rate (%d)", ret);
 		return ret;
 	}

 	serdev_device_set_flow_control(serdev, ec_uart->flowcontrol);

 	return cros_ec_register(ec_dev);
 }

 static void cros_ec_uart_remove(struct serdev_device *serdev)
 {
 	struct cros_ec_device *ec_dev = serdev_device_get_drvdata(serdev);

 	cros_ec_unregister(ec_dev);
 };

 static int __maybe_unused cros_ec_uart_suspend(struct device *dev)
 {
 	struct cros_ec_device *ec_dev = dev_get_drvdata(dev);

 	return cros_ec_suspend(ec_dev);
 }

 static int __maybe_unused cros_ec_uart_resume(struct device *dev)
 {
 	struct cros_ec_device *ec_dev = dev_get_drvdata(dev);

 	return cros_ec_resume(ec_dev);
 }

 static SIMPLE_DEV_PM_OPS(cros_ec_uart_pm_ops, cros_ec_uart_suspend,
 			 cros_ec_uart_resume);

 static const struct of_device_id cros_ec_uart_of_match[] = {
 	{ .compatible = "google,cros-ec-uart" },
 	{}
 };
 MODULE_DEVICE_TABLE(of, cros_ec_uart_of_match);

 #ifdef CONFIG_ACPI
 static const struct acpi_device_id cros_ec_uart_acpi_id[] = {
 	{ "GOOG0019", 0 },
 	{}
 };

 MODULE_DEVICE_TABLE(acpi, cros_ec_uart_acpi_id);
 #endif

 static struct serdev_device_driver cros_ec_uart_driver = {
 	.driver	= {
 		.name	= "cros-ec-uart",
 		.acpi_match_table = ACPI_PTR(cros_ec_uart_acpi_id),
 		.of_match_table = cros_ec_uart_of_match,
 		.pm	= &cros_ec_uart_pm_ops,
 	},
 	.probe		= cros_ec_uart_probe,
 	.remove		= cros_ec_uart_remove,
 };

 module_serdev_device_driver(cros_ec_uart_driver);

 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("UART interface for ChromeOS Embedded Controller");
 MODULE_AUTHOR("Bhanu Prakash Maiya <bhanumaiya@chromium.org>");
	// SPDX-License-Identifier: GPL-2.0-only
	/*
	* UART interface for ChromeOS Embedded Controller
	*
	* Copyright 2020-2022 Google LLC.
	*/

	#include <linux/acpi.h>
	#include <linux/delay.h>
	#include <linux/errno.h>
	#include <linux/init.h>
	#include <linux/kernel.h>
	#include <linux/module.h>
	#include <linux/of.h>
	#include <linux/platform_data/cros_ec_proto.h>
	#include <linux/serdev.h>
	#include <linux/slab.h>
	#include <uapi/linux/sched/types.h>

	#include "cros_ec.h"

	/*
	* EC sends contiguous bytes of response packet on UART AP RX.
	* TTY driver in AP accumulates incoming bytes and calls the registered callback
	* function. Byte count can range from 1 to MAX bytes supported by EC.
	* This driver should wait for long time for all callbacks to be processed.
	* Considering the worst case scenario, wait for 500 msec. This timeout should
	* account for max latency and some additional guard time.
	* Best case: Entire packet is received in ~200 ms, wait queue will be released
	* and packet will be processed.
	* Worst case: TTY driver sends bytes in multiple callbacks. In this case this
	* driver will wait for ~1 sec beyond which it will timeout.
	* This timeout value should not exceed ~500 msec because in case if
	* EC_CMD_REBOOT_EC sent, high level driver should be able to intercept EC
	* in RO.
	*/
	#define EC_MSG_DEADLINE_MS 500

	/**
	* struct response_info - Encapsulate EC response related
	* information for passing between function
	* cros_ec_uart_pkt_xfer() and cros_ec_uart_rx_bytes()
	* callback.
	* @data: Copy the data received from EC here.
	* @max_size: Max size allocated for the @data buffer. If the
	* received data exceeds this value, we log an error.
	* @size: Actual size of data received from EC. This is also
	* used to accumulate byte count with response is received
	* in dma chunks.
	* @exp_len: Expected bytes of response from EC including header.
	* @status: Re-init to 0 before sending a cmd. Updated to 1 when
	* a response is successfully received, or an error number
	* on failure.
	* @wait_queue: Wait queue EC response where the cros_ec sends request
	* to EC and waits
	*/
	struct response_info {
	void *data;
	size_t max_size;
	size_t size;
	size_t exp_len;
	int status;
	wait_queue_head_t wait_queue;
	};

	/**
	* struct cros_ec_uart - information about a uart-connected EC
	*
	* @serdev: serdev uart device we are connected to.
	* @baudrate: UART baudrate of attached EC device.
	* @flowcontrol: UART flowcontrol of attached device.
	* @irq: Linux IRQ number of associated serial device.
	* @response: Response info passing between cros_ec_uart_pkt_xfer()
	* and cros_ec_uart_rx_bytes()
	*/
	struct cros_ec_uart {
	struct serdev_device *serdev;
	u32 baudrate;
	u8 flowcontrol;
	u32 irq;
	struct response_info response;
	};

	static size_t cros_ec_uart_rx_bytes(struct serdev_device *serdev,
	const u8 *data, size_t count)
	{
	struct ec_host_response *host_response;
	struct cros_ec_device *ec_dev = serdev_device_get_drvdata(serdev);
	struct cros_ec_uart *ec_uart = ec_dev->priv;
	struct response_info *resp = &ec_uart->response;

	/* Check if bytes were sent out of band */
	if (!resp->data) {
	/* Discard all bytes */
	dev_warn(ec_dev->dev, "Bytes received out of band, dropping them.\n");
	return count;
	}

	/*
	* Check if incoming bytes + resp->size is greater than allocated
	* buffer in din by cros_ec. This will ensure that if EC sends more
	* bytes than max_size, waiting process will be notified with an error.
	*/
	if (resp->size + count > resp->max_size) {
	resp->status = -EMSGSIZE;
	wake_up(&resp->wait_queue);
	return count;
	}

	memcpy(resp->data + resp->size, data, count);

	resp->size += count;

	/* Read data_len if we received response header and if exp_len was not read before. */
	if (resp->size >= sizeof(*host_response) && resp->exp_len == 0) {
	host_response = (struct ec_host_response *)resp->data;
	resp->exp_len = host_response->data_len + sizeof(*host_response);
	}

	/* If driver received response header and payload from EC, wake up the wait queue. */
	if (resp->size >= sizeof(*host_response) && resp->size == resp->exp_len) {
	resp->status = 1;
	wake_up(&resp->wait_queue);
	}

	return count;
	}

	static int cros_ec_uart_pkt_xfer(struct cros_ec_device *ec_dev,
	struct cros_ec_command *ec_msg)
	{
	struct cros_ec_uart *ec_uart = ec_dev->priv;
	struct serdev_device *serdev = ec_uart->serdev;
	struct response_info *resp = &ec_uart->response;
	struct ec_host_response *host_response;
	unsigned int len;
	int ret, i;
	u8 sum;

	len = cros_ec_prepare_tx(ec_dev, ec_msg);
	dev_dbg(ec_dev->dev, "Prepared len=%d\n", len);

	/* Setup for incoming response */
	resp->data = ec_dev->din;
	resp->max_size = ec_dev->din_size;
	resp->size = 0;
	resp->exp_len = 0;
	resp->status = 0;

	ret = serdev_device_write_buf(serdev, ec_dev->dout, len);
	if (ret < 0 \|\| ret < len) {
	dev_err(ec_dev->dev, "Unable to write data\n");
	if (ret >= 0)
	ret = -EIO;
	goto exit;
	}

	ret = wait_event_timeout(resp->wait_queue, resp->status,
	msecs_to_jiffies(EC_MSG_DEADLINE_MS));
	if (ret == 0) {
	dev_warn(ec_dev->dev, "Timed out waiting for response.\n");
	ret = -ETIMEDOUT;
	goto exit;
	}

	if (resp->status < 0) {
	ret = resp->status;
	dev_warn(ec_dev->dev, "Error response received: %d\n", ret);
	goto exit;
	}

	host_response = (struct ec_host_response *)ec_dev->din;
	ec_msg->result = host_response->result;

	if (host_response->data_len > ec_msg->insize) {
	dev_err(ec_dev->dev, "Resp too long (%d bytes, expected %d)\n",
	host_response->data_len, ec_msg->insize);
	ret = -ENOSPC;
	goto exit;
	}

	/* Validate checksum */
	sum = 0;
	for (i = 0; i < sizeof(*host_response) + host_response->data_len; i++)
	sum += ec_dev->din[i];

	if (sum) {
	dev_err(ec_dev->dev, "Bad packet checksum calculated %x\n", sum);
	ret = -EBADMSG;
	goto exit;
	}

	memcpy(ec_msg->data, ec_dev->din + sizeof(*host_response), host_response->data_len);

	ret = host_response->data_len;

	exit:
	/* Invalidate response buffer to guard against out of band rx data */
	resp->data = NULL;

	if (ec_msg->command == EC_CMD_REBOOT_EC)
	msleep(EC_REBOOT_DELAY_MS);

	return ret;
	}

	static int cros_ec_uart_resource(struct acpi_resource ares, void data)
	{
	struct cros_ec_uart *ec_uart = data;
	struct acpi_resource_uart_serialbus *sb = &ares->data.uart_serial_bus;

	if (ares->type == ACPI_RESOURCE_TYPE_SERIAL_BUS &&
	sb->type == ACPI_RESOURCE_SERIAL_TYPE_UART) {
	ec_uart->baudrate = sb->default_baud_rate;
	dev_dbg(&ec_uart->serdev->dev, "Baudrate %d\n", ec_uart->baudrate);

	ec_uart->flowcontrol = sb->flow_control;
	dev_dbg(&ec_uart->serdev->dev, "Flow control %d\n", ec_uart->flowcontrol);
	}

	return 0;
	}

	static int cros_ec_uart_acpi_probe(struct cros_ec_uart *ec_uart)
	{
	int ret;
	LIST_HEAD(resources);
	struct acpi_device *adev = ACPI_COMPANION(&ec_uart->serdev->dev);

	ret = acpi_dev_get_resources(adev, &resources, cros_ec_uart_resource, ec_uart);
	if (ret < 0)
	return ret;

	acpi_dev_free_resource_list(&resources);

	/* Retrieve GpioInt and translate it to Linux IRQ number */
	ret = acpi_dev_gpio_irq_get(adev, 0);
	if (ret < 0)
	return ret;

	ec_uart->irq = ret;
	dev_dbg(&ec_uart->serdev->dev, "IRQ number %d\n", ec_uart->irq);

	return 0;
	}

	static const struct serdev_device_ops cros_ec_uart_client_ops = {
	.receive_buf = cros_ec_uart_rx_bytes,
	};

	static int cros_ec_uart_probe(struct serdev_device *serdev)
	{
	struct device *dev = &serdev->dev;
	struct cros_ec_device *ec_dev;
	struct cros_ec_uart *ec_uart;
	int ret;

	ec_uart = devm_kzalloc(dev, sizeof(*ec_uart), GFP_KERNEL);
	if (!ec_uart)
	return -ENOMEM;

	ec_dev = devm_kzalloc(dev, sizeof(*ec_dev), GFP_KERNEL);
	if (!ec_dev)
	return -ENOMEM;

	serdev_device_set_drvdata(serdev, ec_dev);
	init_waitqueue_head(&ec_uart->response.wait_queue);

	ec_uart->serdev = serdev;

	ret = cros_ec_uart_acpi_probe(ec_uart);
	if (ret < 0) {
	dev_err(dev, "Failed to get ACPI info (%d)", ret);
	return ret;
	}

	/* Initialize ec_dev for cros_ec */
	ec_dev->phys_name = dev_name(dev);
	ec_dev->dev = dev;
	ec_dev->priv = ec_uart;
	ec_dev->irq = ec_uart->irq;
	ec_dev->cmd_xfer = NULL;
	ec_dev->pkt_xfer = cros_ec_uart_pkt_xfer;
	ec_dev->din_size = sizeof(struct ec_host_response) +
	sizeof(struct ec_response_get_protocol_info);
	ec_dev->dout_size = sizeof(struct ec_host_request);

	serdev_device_set_client_ops(serdev, &cros_ec_uart_client_ops);

	ret = devm_serdev_device_open(dev, serdev);
	if (ret) {
	dev_err(dev, "Unable to open UART device");
	return ret;
	}

	ret = serdev_device_set_baudrate(serdev, ec_uart->baudrate);
	if (ret < 0) {
	dev_err(dev, "Failed to set up host baud rate (%d)", ret);
	return ret;
	}

	serdev_device_set_flow_control(serdev, ec_uart->flowcontrol);

	return cros_ec_register(ec_dev);
	}

	static void cros_ec_uart_remove(struct serdev_device *serdev)
	{
	struct cros_ec_device *ec_dev = serdev_device_get_drvdata(serdev);

	cros_ec_unregister(ec_dev);
	};

	static int __maybe_unused cros_ec_uart_suspend(struct device *dev)
	{
	struct cros_ec_device *ec_dev = dev_get_drvdata(dev);

	return cros_ec_suspend(ec_dev);
	}

	static int __maybe_unused cros_ec_uart_resume(struct device *dev)
	{
	struct cros_ec_device *ec_dev = dev_get_drvdata(dev);

	return cros_ec_resume(ec_dev);
	}

	static SIMPLE_DEV_PM_OPS(cros_ec_uart_pm_ops, cros_ec_uart_suspend,
	cros_ec_uart_resume);

	static const struct of_device_id cros_ec_uart_of_match[] = {
	{ .compatible = "google,cros-ec-uart" },
	{}
	};
	MODULE_DEVICE_TABLE(of, cros_ec_uart_of_match);

	#ifdef CONFIG_ACPI
	static const struct acpi_device_id cros_ec_uart_acpi_id[] = {
	{ "GOOG0019", 0 },
	{}
	};

	MODULE_DEVICE_TABLE(acpi, cros_ec_uart_acpi_id);
	#endif

	static struct serdev_device_driver cros_ec_uart_driver = {
	.driver = {
	.name = "cros-ec-uart",
	.acpi_match_table = ACPI_PTR(cros_ec_uart_acpi_id),
	.of_match_table = cros_ec_uart_of_match,
	.pm = &cros_ec_uart_pm_ops,
	},
	.probe = cros_ec_uart_probe,
	.remove = cros_ec_uart_remove,
	};

	module_serdev_device_driver(cros_ec_uart_driver);

	MODULE_LICENSE("GPL");
	MODULE_DESCRIPTION("UART interface for ChromeOS Embedded Controller");
	MODULE_AUTHOR("Bhanu Prakash Maiya <bhanumaiya@chromium.org>");