/* SPDX-License-Identifier: (LGPL-2.1 OR BSD-2-Clause) */
#ifndef __BPF_TRACING_H__
#define __BPF_TRACING_H__

#include "bpf_helpers.h"

/* Scan the ARCH passed in from ARCH env variable (see Makefile) */
#if defined(__TARGET_ARCH_x86)
	#define bpf_target_x86
	#define bpf_target_defined
#elif defined(__TARGET_ARCH_s390)
	#define bpf_target_s390
	#define bpf_target_defined
#elif defined(__TARGET_ARCH_arm)
	#define bpf_target_arm
	#define bpf_target_defined
#elif defined(__TARGET_ARCH_arm64)
	#define bpf_target_arm64
	#define bpf_target_defined
#elif defined(__TARGET_ARCH_mips)
	#define bpf_target_mips
	#define bpf_target_defined
#elif defined(__TARGET_ARCH_powerpc)
	#define bpf_target_powerpc
	#define bpf_target_defined
#elif defined(__TARGET_ARCH_sparc)
	#define bpf_target_sparc
	#define bpf_target_defined
#elif defined(__TARGET_ARCH_riscv)
	#define bpf_target_riscv
	#define bpf_target_defined
#elif defined(__TARGET_ARCH_arc)
	#define bpf_target_arc
	#define bpf_target_defined
#elif defined(__TARGET_ARCH_loongarch)
	#define bpf_target_loongarch
	#define bpf_target_defined
#else

/* Fall back to what the compiler says */
#if defined(__x86_64__)
	#define bpf_target_x86
	#define bpf_target_defined
#elif defined(__s390__)
	#define bpf_target_s390
	#define bpf_target_defined
#elif defined(__arm__)
	#define bpf_target_arm
	#define bpf_target_defined
#elif defined(__aarch64__)
	#define bpf_target_arm64
	#define bpf_target_defined
#elif defined(__mips__)
	#define bpf_target_mips
	#define bpf_target_defined
#elif defined(__powerpc__)
	#define bpf_target_powerpc
	#define bpf_target_defined
#elif defined(__sparc__)
	#define bpf_target_sparc
	#define bpf_target_defined
#elif defined(__riscv) && __riscv_xlen == 64
	#define bpf_target_riscv
	#define bpf_target_defined
#elif defined(__arc__)
	#define bpf_target_arc
	#define bpf_target_defined
#elif defined(__loongarch__)
	#define bpf_target_loongarch
	#define bpf_target_defined
#endif /* no compiler target */

#endif

#ifndef __BPF_TARGET_MISSING
#define __BPF_TARGET_MISSING "GCC error \"Must specify a BPF target arch via __TARGET_ARCH_xxx\""
#endif

#if defined(bpf_target_x86)

/*
 * https://en.wikipedia.org/wiki/X86_calling_conventions#System_V_AMD64_ABI
 */

#if defined(__KERNEL__) || defined(__VMLINUX_H__)

#define __PT_PARM1_REG di
#define __PT_PARM2_REG si
#define __PT_PARM3_REG dx
#define __PT_PARM4_REG cx
#define __PT_PARM5_REG r8
#define __PT_PARM6_REG r9
/*
 * Syscall uses r10 for PARM4. See arch/x86/entry/entry_64.S:entry_SYSCALL_64
 * comments in Linux sources. And refer to syscall(2) manpage.
 */
#define __PT_PARM1_SYSCALL_REG __PT_PARM1_REG
#define __PT_PARM2_SYSCALL_REG __PT_PARM2_REG
#define __PT_PARM3_SYSCALL_REG __PT_PARM3_REG
#define __PT_PARM4_SYSCALL_REG r10
#define __PT_PARM5_SYSCALL_REG __PT_PARM5_REG
#define __PT_PARM6_SYSCALL_REG __PT_PARM6_REG

#define __PT_RET_REG sp
#define __PT_FP_REG bp
#define __PT_RC_REG ax
#define __PT_SP_REG sp
#define __PT_IP_REG ip

#else

#ifdef __i386__

/* i386 kernel is built with -mregparm=3 */
#define __PT_PARM1_REG eax
#define __PT_PARM2_REG edx
#define __PT_PARM3_REG ecx
/* i386 syscall ABI is very different, refer to syscall(2) manpage */
#define __PT_PARM1_SYSCALL_REG ebx
#define __PT_PARM2_SYSCALL_REG ecx
#define __PT_PARM3_SYSCALL_REG edx
#define __PT_PARM4_SYSCALL_REG esi
#define __PT_PARM5_SYSCALL_REG edi
#define __PT_PARM6_SYSCALL_REG ebp

#define __PT_RET_REG esp
#define __PT_FP_REG ebp
#define __PT_RC_REG eax
#define __PT_SP_REG esp
#define __PT_IP_REG eip

#else /* __i386__ */

#define __PT_PARM1_REG rdi
#define __PT_PARM2_REG rsi
#define __PT_PARM3_REG rdx
#define __PT_PARM4_REG rcx
#define __PT_PARM5_REG r8
#define __PT_PARM6_REG r9

#define __PT_PARM1_SYSCALL_REG __PT_PARM1_REG
#define __PT_PARM2_SYSCALL_REG __PT_PARM2_REG
#define __PT_PARM3_SYSCALL_REG __PT_PARM3_REG
#define __PT_PARM4_SYSCALL_REG r10
#define __PT_PARM5_SYSCALL_REG __PT_PARM5_REG
#define __PT_PARM6_SYSCALL_REG __PT_PARM6_REG

#define __PT_RET_REG rsp
#define __PT_FP_REG rbp
#define __PT_RC_REG rax
#define __PT_SP_REG rsp
#define __PT_IP_REG rip

#endif /* __i386__ */

#endif /* __KERNEL__ || __VMLINUX_H__ */

#elif defined(bpf_target_s390)

/*
 * https://github.com/IBM/s390x-abi/releases/download/v1.6/lzsabi_s390x.pdf
 */

struct pt_regs___s390 {
	unsigned long orig_gpr2;
} __attribute__((preserve_access_index));

/* s390 provides user_pt_regs instead of struct pt_regs to userspace */
#define __PT_REGS_CAST(x) ((const user_pt_regs *)(x))
#define __PT_PARM1_REG gprs[2]
#define __PT_PARM2_REG gprs[3]
#define __PT_PARM3_REG gprs[4]
#define __PT_PARM4_REG gprs[5]
#define __PT_PARM5_REG gprs[6]

#define __PT_PARM1_SYSCALL_REG orig_gpr2
#define __PT_PARM2_SYSCALL_REG __PT_PARM2_REG
#define __PT_PARM3_SYSCALL_REG __PT_PARM3_REG
#define __PT_PARM4_SYSCALL_REG __PT_PARM4_REG
#define __PT_PARM5_SYSCALL_REG __PT_PARM5_REG
#define __PT_PARM6_SYSCALL_REG gprs[7]
#define PT_REGS_PARM1_SYSCALL(x) (((const struct pt_regs___s390 *)(x))->__PT_PARM1_SYSCALL_REG)
#define PT_REGS_PARM1_CORE_SYSCALL(x) \
	BPF_CORE_READ((const struct pt_regs___s390 *)(x), __PT_PARM1_SYSCALL_REG)

#define __PT_RET_REG gprs[14]
#define __PT_FP_REG gprs[11]	/* Works only with CONFIG_FRAME_POINTER */
#define __PT_RC_REG gprs[2]
#define __PT_SP_REG gprs[15]
#define __PT_IP_REG psw.addr

#elif defined(bpf_target_arm)

/*
 * https://github.com/ARM-software/abi-aa/blob/main/aapcs32/aapcs32.rst#machine-registers
 */

#define __PT_PARM1_REG uregs[0]
#define __PT_PARM2_REG uregs[1]
#define __PT_PARM3_REG uregs[2]
#define __PT_PARM4_REG uregs[3]

#define __PT_PARM1_SYSCALL_REG __PT_PARM1_REG
#define __PT_PARM2_SYSCALL_REG __PT_PARM2_REG
#define __PT_PARM3_SYSCALL_REG __PT_PARM3_REG
#define __PT_PARM4_SYSCALL_REG __PT_PARM4_REG
#define __PT_PARM5_SYSCALL_REG uregs[4]
#define __PT_PARM6_SYSCALL_REG uregs[5]
#define __PT_PARM7_SYSCALL_REG uregs[6]

#define __PT_RET_REG uregs[14]
#define __PT_FP_REG uregs[11]	/* Works only with CONFIG_FRAME_POINTER */
#define __PT_RC_REG uregs[0]
#define __PT_SP_REG uregs[13]
#define __PT_IP_REG uregs[12]

#elif defined(bpf_target_arm64)

/*
 * https://github.com/ARM-software/abi-aa/blob/main/aapcs64/aapcs64.rst#machine-registers
 */

struct pt_regs___arm64 {
	unsigned long orig_x0;
} __attribute__((preserve_access_index));

/* arm64 provides struct user_pt_regs instead of struct pt_regs to userspace */
#define __PT_REGS_CAST(x) ((const struct user_pt_regs *)(x))
#define __PT_PARM1_REG regs[0]
#define __PT_PARM2_REG regs[1]
#define __PT_PARM3_REG regs[2]
#define __PT_PARM4_REG regs[3]
#define __PT_PARM5_REG regs[4]
#define __PT_PARM6_REG regs[5]
#define __PT_PARM7_REG regs[6]
#define __PT_PARM8_REG regs[7]

#define __PT_PARM1_SYSCALL_REG orig_x0
#define __PT_PARM2_SYSCALL_REG __PT_PARM2_REG
#define __PT_PARM3_SYSCALL_REG __PT_PARM3_REG
#define __PT_PARM4_SYSCALL_REG __PT_PARM4_REG
#define __PT_PARM5_SYSCALL_REG __PT_PARM5_REG
#define __PT_PARM6_SYSCALL_REG __PT_PARM6_REG
#define PT_REGS_PARM1_SYSCALL(x) (((const struct pt_regs___arm64 *)(x))->__PT_PARM1_SYSCALL_REG)
#define PT_REGS_PARM1_CORE_SYSCALL(x) \
	BPF_CORE_READ((const struct pt_regs___arm64 *)(x), __PT_PARM1_SYSCALL_REG)

#define __PT_RET_REG regs[30]
#define __PT_FP_REG regs[29]	/* Works only with CONFIG_FRAME_POINTER */
#define __PT_RC_REG regs[0]
#define __PT_SP_REG sp
#define __PT_IP_REG pc

#elif defined(bpf_target_mips)

/*
 * N64 ABI is assumed right now.
 * https://en.wikipedia.org/wiki/MIPS_architecture#Calling_conventions
 */

#define __PT_PARM1_REG regs[4]
#define __PT_PARM2_REG regs[5]
#define __PT_PARM3_REG regs[6]
#define __PT_PARM4_REG regs[7]
#define __PT_PARM5_REG regs[8]
#define __PT_PARM6_REG regs[9]
#define __PT_PARM7_REG regs[10]
#define __PT_PARM8_REG regs[11]

#define __PT_PARM1_SYSCALL_REG __PT_PARM1_REG
#define __PT_PARM2_SYSCALL_REG __PT_PARM2_REG
#define __PT_PARM3_SYSCALL_REG __PT_PARM3_REG
#define __PT_PARM4_SYSCALL_REG __PT_PARM4_REG
#define __PT_PARM5_SYSCALL_REG __PT_PARM5_REG /* only N32/N64 */
#define __PT_PARM6_SYSCALL_REG __PT_PARM6_REG /* only N32/N64 */

#define __PT_RET_REG regs[31]
#define __PT_FP_REG regs[30]	/* Works only with CONFIG_FRAME_POINTER */
#define __PT_RC_REG regs[2]
#define __PT_SP_REG regs[29]
#define __PT_IP_REG cp0_epc

#elif defined(bpf_target_powerpc)

/*
 * http://refspecs.linux-foundation.org/elf/elfspec_ppc.pdf (page 3-14,
 * section "Function Calling Sequence")
 */

#define __PT_PARM1_REG gpr[3]
#define __PT_PARM2_REG gpr[4]
#define __PT_PARM3_REG gpr[5]
#define __PT_PARM4_REG gpr[6]
#define __PT_PARM5_REG gpr[7]
#define __PT_PARM6_REG gpr[8]
#define __PT_PARM7_REG gpr[9]
#define __PT_PARM8_REG gpr[10]

/* powerpc does not select ARCH_HAS_SYSCALL_WRAPPER. */
#define PT_REGS_SYSCALL_REGS(ctx) ctx
#define __PT_PARM1_SYSCALL_REG orig_gpr3
#define __PT_PARM2_SYSCALL_REG __PT_PARM2_REG
#define __PT_PARM3_SYSCALL_REG __PT_PARM3_REG
#define __PT_PARM4_SYSCALL_REG __PT_PARM4_REG
#define __PT_PARM5_SYSCALL_REG __PT_PARM5_REG
#define __PT_PARM6_SYSCALL_REG __PT_PARM6_REG
#if !defined(__arch64__)
#define __PT_PARM7_SYSCALL_REG __PT_PARM7_REG /* only powerpc (not powerpc64) */
#endif

#define __PT_RET_REG regs[31]
#define __PT_FP_REG __unsupported__
#define __PT_RC_REG gpr[3]
#define __PT_SP_REG sp
#define __PT_IP_REG nip

#elif defined(bpf_target_sparc)

/*
 * https://en.wikipedia.org/wiki/Calling_convention#SPARC
 */

#define __PT_PARM1_REG u_regs[UREG_I0]
#define __PT_PARM2_REG u_regs[UREG_I1]
#define __PT_PARM3_REG u_regs[UREG_I2]
#define __PT_PARM4_REG u_regs[UREG_I3]
#define __PT_PARM5_REG u_regs[UREG_I4]
#define __PT_PARM6_REG u_regs[UREG_I5]

#define __PT_PARM1_SYSCALL_REG __PT_PARM1_REG
#define __PT_PARM2_SYSCALL_REG __PT_PARM2_REG
#define __PT_PARM3_SYSCALL_REG __PT_PARM3_REG
#define __PT_PARM4_SYSCALL_REG __PT_PARM4_REG
#define __PT_PARM5_SYSCALL_REG __PT_PARM5_REG
#define __PT_PARM6_SYSCALL_REG __PT_PARM6_REG

#define __PT_RET_REG u_regs[UREG_I7]
#define __PT_FP_REG __unsupported__
#define __PT_RC_REG u_regs[UREG_I0]
#define __PT_SP_REG u_regs[UREG_FP]
/* Should this also be a bpf_target check for the sparc case? */
#if defined(__arch64__)
#define __PT_IP_REG tpc
#else
#define __PT_IP_REG pc
#endif

#elif defined(bpf_target_riscv)

/*
 * https://github.com/riscv-non-isa/riscv-elf-psabi-doc/blob/master/riscv-cc.adoc#risc-v-calling-conventions
 */

struct pt_regs___riscv {
	unsigned long orig_a0;
} __attribute__((preserve_access_index));

/* riscv provides struct user_regs_struct instead of struct pt_regs to userspace */
#define __PT_REGS_CAST(x) ((const struct user_regs_struct *)(x))
#define __PT_PARM1_REG a0
#define __PT_PARM2_REG a1
#define __PT_PARM3_REG a2
#define __PT_PARM4_REG a3
#define __PT_PARM5_REG a4
#define __PT_PARM6_REG a5
#define __PT_PARM7_REG a6
#define __PT_PARM8_REG a7

#define __PT_PARM1_SYSCALL_REG orig_a0
#define __PT_PARM2_SYSCALL_REG __PT_PARM2_REG
#define __PT_PARM3_SYSCALL_REG __PT_PARM3_REG
#define __PT_PARM4_SYSCALL_REG __PT_PARM4_REG
#define __PT_PARM5_SYSCALL_REG __PT_PARM5_REG
#define __PT_PARM6_SYSCALL_REG __PT_PARM6_REG
#define PT_REGS_PARM1_SYSCALL(x) (((const struct pt_regs___riscv *)(x))->__PT_PARM1_SYSCALL_REG)
#define PT_REGS_PARM1_CORE_SYSCALL(x) \
	BPF_CORE_READ((const struct pt_regs___riscv *)(x), __PT_PARM1_SYSCALL_REG)

#define __PT_RET_REG ra
#define __PT_FP_REG s0
#define __PT_RC_REG a0
#define __PT_SP_REG sp
#define __PT_IP_REG pc

#elif defined(bpf_target_arc)

/*
 * Section "Function Calling Sequence" (page 24):
 * https://raw.githubusercontent.com/wiki/foss-for-synopsys-dwc-arc-processors/toolchain/files/ARCv2_ABI.pdf
 */

/* arc provides struct user_regs_struct instead of struct pt_regs to userspace */
#define __PT_REGS_CAST(x) ((const struct user_regs_struct *)(x))
#define __PT_PARM1_REG scratch.r0
#define __PT_PARM2_REG scratch.r1
#define __PT_PARM3_REG scratch.r2
#define __PT_PARM4_REG scratch.r3
#define __PT_PARM5_REG scratch.r4
#define __PT_PARM6_REG scratch.r5
#define __PT_PARM7_REG scratch.r6
#define __PT_PARM8_REG scratch.r7

/* arc does not select ARCH_HAS_SYSCALL_WRAPPER. */
#define PT_REGS_SYSCALL_REGS(ctx) ctx
#define __PT_PARM1_SYSCALL_REG __PT_PARM1_REG
#define __PT_PARM2_SYSCALL_REG __PT_PARM2_REG
#define __PT_PARM3_SYSCALL_REG __PT_PARM3_REG
#define __PT_PARM4_SYSCALL_REG __PT_PARM4_REG
#define __PT_PARM5_SYSCALL_REG __PT_PARM5_REG
#define __PT_PARM6_SYSCALL_REG __PT_PARM6_REG

#define __PT_RET_REG scratch.blink
#define __PT_FP_REG scratch.fp
#define __PT_RC_REG scratch.r0
#define __PT_SP_REG scratch.sp
#define __PT_IP_REG scratch.ret

#elif defined(bpf_target_loongarch)

/*
 * https://docs.kernel.org/loongarch/introduction.html
 * https://loongson.github.io/LoongArch-Documentation/LoongArch-ELF-ABI-EN.html
 */

/* loongarch provides struct user_pt_regs instead of struct pt_regs to userspace */
#define __PT_REGS_CAST(x) ((const struct user_pt_regs *)(x))
#define __PT_PARM1_REG regs[4]
#define __PT_PARM2_REG regs[5]
#define __PT_PARM3_REG regs[6]
#define __PT_PARM4_REG regs[7]
#define __PT_PARM5_REG regs[8]
#define __PT_PARM6_REG regs[9]
#define __PT_PARM7_REG regs[10]
#define __PT_PARM8_REG regs[11]

/* loongarch does not select ARCH_HAS_SYSCALL_WRAPPER. */
#define PT_REGS_SYSCALL_REGS(ctx) ctx
#define __PT_PARM1_SYSCALL_REG __PT_PARM1_REG
#define __PT_PARM2_SYSCALL_REG __PT_PARM2_REG
#define __PT_PARM3_SYSCALL_REG __PT_PARM3_REG
#define __PT_PARM4_SYSCALL_REG __PT_PARM4_REG
#define __PT_PARM5_SYSCALL_REG __PT_PARM5_REG
#define __PT_PARM6_SYSCALL_REG __PT_PARM6_REG

#define __PT_RET_REG regs[1]
#define __PT_FP_REG regs[22]
#define __PT_RC_REG regs[4]
#define __PT_SP_REG regs[3]
#define __PT_IP_REG csr_era

#endif

#if defined(bpf_target_defined)

struct pt_regs;

/* allow some architectures to override `struct pt_regs` */
#ifndef __PT_REGS_CAST
#define __PT_REGS_CAST(x) (x)
#endif

/*
 * Different architectures support different number of arguments passed
 * through registers. i386 supports just 3, some arches support up to 8.
 */
#ifndef __PT_PARM4_REG
#define __PT_PARM4_REG __unsupported__
#endif
#ifndef __PT_PARM5_REG
#define __PT_PARM5_REG __unsupported__
#endif
#ifndef __PT_PARM6_REG
#define __PT_PARM6_REG __unsupported__
#endif
#ifndef __PT_PARM7_REG
#define __PT_PARM7_REG __unsupported__
#endif
#ifndef __PT_PARM8_REG
#define __PT_PARM8_REG __unsupported__
#endif
/*
 * Similarly, syscall-specific conventions might differ between function call
 * conventions within each architecture. All supported architectures pass
 * either 6 or 7 syscall arguments in registers.
 *
 * See syscall(2) manpage for succinct table with information on each arch.
 */
#ifndef __PT_PARM7_SYSCALL_REG
#define __PT_PARM7_SYSCALL_REG __unsupported__
#endif

#define PT_REGS_PARM1(x) (__PT_REGS_CAST(x)->__PT_PARM1_REG)
#define PT_REGS_PARM2(x) (__PT_REGS_CAST(x)->__PT_PARM2_REG)
#define PT_REGS_PARM3(x) (__PT_REGS_CAST(x)->__PT_PARM3_REG)
#define PT_REGS_PARM4(x) (__PT_REGS_CAST(x)->__PT_PARM4_REG)
#define PT_REGS_PARM5(x) (__PT_REGS_CAST(x)->__PT_PARM5_REG)
#define PT_REGS_PARM6(x) (__PT_REGS_CAST(x)->__PT_PARM6_REG)
#define PT_REGS_PARM7(x) (__PT_REGS_CAST(x)->__PT_PARM7_REG)
#define PT_REGS_PARM8(x) (__PT_REGS_CAST(x)->__PT_PARM8_REG)
#define PT_REGS_RET(x) (__PT_REGS_CAST(x)->__PT_RET_REG)
#define PT_REGS_FP(x) (__PT_REGS_CAST(x)->__PT_FP_REG)
#define PT_REGS_RC(x) (__PT_REGS_CAST(x)->__PT_RC_REG)
#define PT_REGS_SP(x) (__PT_REGS_CAST(x)->__PT_SP_REG)
#define PT_REGS_IP(x) (__PT_REGS_CAST(x)->__PT_IP_REG)

#define PT_REGS_PARM1_CORE(x) BPF_CORE_READ(__PT_REGS_CAST(x), __PT_PARM1_REG)
#define PT_REGS_PARM2_CORE(x) BPF_CORE_READ(__PT_REGS_CAST(x), __PT_PARM2_REG)
#define PT_REGS_PARM3_CORE(x) BPF_CORE_READ(__PT_REGS_CAST(x), __PT_PARM3_REG)
#define PT_REGS_PARM4_CORE(x) BPF_CORE_READ(__PT_REGS_CAST(x), __PT_PARM4_REG)
#define PT_REGS_PARM5_CORE(x) BPF_CORE_READ(__PT_REGS_CAST(x), __PT_PARM5_REG)
#define PT_REGS_PARM6_CORE(x) BPF_CORE_READ(__PT_REGS_CAST(x), __PT_PARM6_REG)
#define PT_REGS_PARM7_CORE(x) BPF_CORE_READ(__PT_REGS_CAST(x), __PT_PARM7_REG)
#define PT_REGS_PARM8_CORE(x) BPF_CORE_READ(__PT_REGS_CAST(x), __PT_PARM8_REG)
#define PT_REGS_RET_CORE(x) BPF_CORE_READ(__PT_REGS_CAST(x), __PT_RET_REG)
#define PT_REGS_FP_CORE(x) BPF_CORE_READ(__PT_REGS_CAST(x), __PT_FP_REG)
#define PT_REGS_RC_CORE(x) BPF_CORE_READ(__PT_REGS_CAST(x), __PT_RC_REG)
#define PT_REGS_SP_CORE(x) BPF_CORE_READ(__PT_REGS_CAST(x), __PT_SP_REG)
#define PT_REGS_IP_CORE(x) BPF_CORE_READ(__PT_REGS_CAST(x), __PT_IP_REG)

#if defined(bpf_target_powerpc)

#define BPF_KPROBE_READ_RET_IP(ip, ctx)		({ (ip) = (ctx)->link; })
#define BPF_KRETPROBE_READ_RET_IP		BPF_KPROBE_READ_RET_IP

#elif defined(bpf_target_sparc) || defined(bpf_target_arm64)

#define BPF_KPROBE_READ_RET_IP(ip, ctx)		({ (ip) = PT_REGS_RET(ctx); })
#define BPF_KRETPROBE_READ_RET_IP		BPF_KPROBE_READ_RET_IP

#else

#define BPF_KPROBE_READ_RET_IP(ip, ctx)					    \
	({ bpf_probe_read_kernel(&(ip), sizeof(ip), (void *)PT_REGS_RET(ctx)); })
#define BPF_KRETPROBE_READ_RET_IP(ip, ctx)				    \
	({ bpf_probe_read_kernel(&(ip), sizeof(ip), (void *)(PT_REGS_FP(ctx) + sizeof(ip))); })

#endif

#ifndef PT_REGS_PARM1_SYSCALL
#define PT_REGS_PARM1_SYSCALL(x) (__PT_REGS_CAST(x)->__PT_PARM1_SYSCALL_REG)
#define PT_REGS_PARM1_CORE_SYSCALL(x) BPF_CORE_READ(__PT_REGS_CAST(x), __PT_PARM1_SYSCALL_REG)
#endif
#ifndef PT_REGS_PARM2_SYSCALL
#define PT_REGS_PARM2_SYSCALL(x) (__PT_REGS_CAST(x)->__PT_PARM2_SYSCALL_REG)
#define PT_REGS_PARM2_CORE_SYSCALL(x) BPF_CORE_READ(__PT_REGS_CAST(x), __PT_PARM2_SYSCALL_REG)
#endif
#ifndef PT_REGS_PARM3_SYSCALL
#define PT_REGS_PARM3_SYSCALL(x) (__PT_REGS_CAST(x)->__PT_PARM3_SYSCALL_REG)
#define PT_REGS_PARM3_CORE_SYSCALL(x) BPF_CORE_READ(__PT_REGS_CAST(x), __PT_PARM3_SYSCALL_REG)
#endif
#ifndef PT_REGS_PARM4_SYSCALL
#define PT_REGS_PARM4_SYSCALL(x) (__PT_REGS_CAST(x)->__PT_PARM4_SYSCALL_REG)
#define PT_REGS_PARM4_CORE_SYSCALL(x) BPF_CORE_READ(__PT_REGS_CAST(x), __PT_PARM4_SYSCALL_REG)
#endif
#ifndef PT_REGS_PARM5_SYSCALL
#define PT_REGS_PARM5_SYSCALL(x) (__PT_REGS_CAST(x)->__PT_PARM5_SYSCALL_REG)
#define PT_REGS_PARM5_CORE_SYSCALL(x) BPF_CORE_READ(__PT_REGS_CAST(x), __PT_PARM5_SYSCALL_REG)
#endif
#ifndef PT_REGS_PARM6_SYSCALL
#define PT_REGS_PARM6_SYSCALL(x) (__PT_REGS_CAST(x)->__PT_PARM6_SYSCALL_REG)
#define PT_REGS_PARM6_CORE_SYSCALL(x) BPF_CORE_READ(__PT_REGS_CAST(x), __PT_PARM6_SYSCALL_REG)
#endif
#ifndef PT_REGS_PARM7_SYSCALL
#define PT_REGS_PARM7_SYSCALL(x) (__PT_REGS_CAST(x)->__PT_PARM7_SYSCALL_REG)
#define PT_REGS_PARM7_CORE_SYSCALL(x) BPF_CORE_READ(__PT_REGS_CAST(x), __PT_PARM7_SYSCALL_REG)
#endif

#else /* defined(bpf_target_defined) */

#define PT_REGS_PARM1(x) ({ _Pragma(__BPF_TARGET_MISSING); 0l; })
#define PT_REGS_PARM2(x) ({ _Pragma(__BPF_TARGET_MISSING); 0l; })
#define PT_REGS_PARM3(x) ({ _Pragma(__BPF_TARGET_MISSING); 0l; })
#define PT_REGS_PARM4(x) ({ _Pragma(__BPF_TARGET_MISSING); 0l; })
#define PT_REGS_PARM5(x) ({ _Pragma(__BPF_TARGET_MISSING); 0l; })
#define PT_REGS_PARM6(x) ({ _Pragma(__BPF_TARGET_MISSING); 0l; })
#define PT_REGS_PARM7(x) ({ _Pragma(__BPF_TARGET_MISSING); 0l; })
#define PT_REGS_PARM8(x) ({ _Pragma(__BPF_TARGET_MISSING); 0l; })
#define PT_REGS_RET(x) ({ _Pragma(__BPF_TARGET_MISSING); 0l; })
#define PT_REGS_FP(x) ({ _Pragma(__BPF_TARGET_MISSING); 0l; })
#define PT_REGS_RC(x) ({ _Pragma(__BPF_TARGET_MISSING); 0l; })
#define PT_REGS_SP(x) ({ _Pragma(__BPF_TARGET_MISSING); 0l; })
#define PT_REGS_IP(x) ({ _Pragma(__BPF_TARGET_MISSING); 0l; })

#define PT_REGS_PARM1_CORE(x) ({ _Pragma(__BPF_TARGET_MISSING); 0l; })
#define PT_REGS_PARM2_CORE(x) ({ _Pragma(__BPF_TARGET_MISSING); 0l; })
#define PT_REGS_PARM3_CORE(x) ({ _Pragma(__BPF_TARGET_MISSING); 0l; })
#define PT_REGS_PARM4_CORE(x) ({ _Pragma(__BPF_TARGET_MISSING); 0l; })
#define PT_REGS_PARM5_CORE(x) ({ _Pragma(__BPF_TARGET_MISSING); 0l; })
#define PT_REGS_PARM6_CORE(x) ({ _Pragma(__BPF_TARGET_MISSING); 0l; })
#define PT_REGS_PARM7_CORE(x) ({ _Pragma(__BPF_TARGET_MISSING); 0l; })
#define PT_REGS_PARM8_CORE(x) ({ _Pragma(__BPF_TARGET_MISSING); 0l; })
#define PT_REGS_RET_CORE(x) ({ _Pragma(__BPF_TARGET_MISSING); 0l; })
#define PT_REGS_FP_CORE(x) ({ _Pragma(__BPF_TARGET_MISSING); 0l; })
#define PT_REGS_RC_CORE(x) ({ _Pragma(__BPF_TARGET_MISSING); 0l; })
#define PT_REGS_SP_CORE(x) ({ _Pragma(__BPF_TARGET_MISSING); 0l; })
#define PT_REGS_IP_CORE(x) ({ _Pragma(__BPF_TARGET_MISSING); 0l; })

#define BPF_KPROBE_READ_RET_IP(ip, ctx) ({ _Pragma(__BPF_TARGET_MISSING); 0l; })
#define BPF_KRETPROBE_READ_RET_IP(ip, ctx) ({ _Pragma(__BPF_TARGET_MISSING); 0l; })

#define PT_REGS_PARM1_SYSCALL(x) ({ _Pragma(__BPF_TARGET_MISSING); 0l; })
#define PT_REGS_PARM2_SYSCALL(x) ({ _Pragma(__BPF_TARGET_MISSING); 0l; })
#define PT_REGS_PARM3_SYSCALL(x) ({ _Pragma(__BPF_TARGET_MISSING); 0l; })
#define PT_REGS_PARM4_SYSCALL(x) ({ _Pragma(__BPF_TARGET_MISSING); 0l; })
#define PT_REGS_PARM5_SYSCALL(x) ({ _Pragma(__BPF_TARGET_MISSING); 0l; })
#define PT_REGS_PARM6_SYSCALL(x) ({ _Pragma(__BPF_TARGET_MISSING); 0l; })
#define PT_REGS_PARM7_SYSCALL(x) ({ _Pragma(__BPF_TARGET_MISSING); 0l; })

#define PT_REGS_PARM1_CORE_SYSCALL(x) ({ _Pragma(__BPF_TARGET_MISSING); 0l; })
#define PT_REGS_PARM2_CORE_SYSCALL(x) ({ _Pragma(__BPF_TARGET_MISSING); 0l; })
#define PT_REGS_PARM3_CORE_SYSCALL(x) ({ _Pragma(__BPF_TARGET_MISSING); 0l; })
#define PT_REGS_PARM4_CORE_SYSCALL(x) ({ _Pragma(__BPF_TARGET_MISSING); 0l; })
#define PT_REGS_PARM5_CORE_SYSCALL(x) ({ _Pragma(__BPF_TARGET_MISSING); 0l; })
#define PT_REGS_PARM6_CORE_SYSCALL(x) ({ _Pragma(__BPF_TARGET_MISSING); 0l; })
#define PT_REGS_PARM7_CORE_SYSCALL(x) ({ _Pragma(__BPF_TARGET_MISSING); 0l; })

#endif /* defined(bpf_target_defined) */

/*
 * When invoked from a syscall handler kprobe, returns a pointer to a
 * struct pt_regs containing syscall arguments and suitable for passing to
 * PT_REGS_PARMn_SYSCALL() and PT_REGS_PARMn_CORE_SYSCALL().
 */
#ifndef PT_REGS_SYSCALL_REGS
/* By default, assume that the arch selects ARCH_HAS_SYSCALL_WRAPPER. */
#define PT_REGS_SYSCALL_REGS(ctx) ((struct pt_regs *)PT_REGS_PARM1(ctx))
#endif

#ifndef ___bpf_concat
#define ___bpf_concat(a, b) a ## b
#endif
#ifndef ___bpf_apply
#define ___bpf_apply(fn, n) ___bpf_concat(fn, n)
#endif
#ifndef ___bpf_nth
#define ___bpf_nth(_, _1, _2, _3, _4, _5, _6, _7, _8, _9, _a, _b, _c, N, ...) N
#endif
#ifndef ___bpf_narg
#define ___bpf_narg(...) ___bpf_nth(_, ##__VA_ARGS__, 12, 11, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1, 0)
#endif

#define ___bpf_ctx_cast0()            ctx
#define ___bpf_ctx_cast1(x)           ___bpf_ctx_cast0(), ctx[0]
#define ___bpf_ctx_cast2(x, args...)  ___bpf_ctx_cast1(args), ctx[1]
#define ___bpf_ctx_cast3(x, args...)  ___bpf_ctx_cast2(args), ctx[2]
#define ___bpf_ctx_cast4(x, args...)  ___bpf_ctx_cast3(args), ctx[3]
#define ___bpf_ctx_cast5(x, args...)  ___bpf_ctx_cast4(args), ctx[4]
#define ___bpf_ctx_cast6(x, args...)  ___bpf_ctx_cast5(args), ctx[5]
#define ___bpf_ctx_cast7(x, args...)  ___bpf_ctx_cast6(args), ctx[6]
#define ___bpf_ctx_cast8(x, args...)  ___bpf_ctx_cast7(args), ctx[7]
#define ___bpf_ctx_cast9(x, args...)  ___bpf_ctx_cast8(args), ctx[8]
#define ___bpf_ctx_cast10(x, args...) ___bpf_ctx_cast9(args), ctx[9]
#define ___bpf_ctx_cast11(x, args...) ___bpf_ctx_cast10(args), ctx[10]
#define ___bpf_ctx_cast12(x, args...) ___bpf_ctx_cast11(args), ctx[11]
#define ___bpf_ctx_cast(args...)      ___bpf_apply(___bpf_ctx_cast, ___bpf_narg(args))(args)

/*
 * BPF_PROG is a convenience wrapper for generic tp_btf/fentry/fexit and
 * similar kinds of BPF programs, that accept input arguments as a single
 * pointer to untyped u64 array, where each u64 can actually be a typed
 * pointer or integer of different size. Instead of requiring user to write
 * manual casts and work with array elements by index, BPF_PROG macro
 * allows user to declare a list of named and typed input arguments in the
 * same syntax as for normal C function. All the casting is hidden and
 * performed transparently, while user code can just assume working with
 * function arguments of specified type and name.
 *
 * Original raw context argument is preserved as well as 'ctx' argument.
 * This is useful when using BPF helpers that expect original context
 * as one of the parameters (e.g., for bpf_perf_event_output()).
 */
#define BPF_PROG(name, args...)						    \
name(unsigned long long *ctx);						    \
static __always_inline typeof(name(0))					    \
____##name(unsigned long long *ctx, ##args);				    \
typeof(name(0)) name(unsigned long long *ctx)				    \
{									    \
	_Pragma("GCC diagnostic push")					    \
	_Pragma("GCC diagnostic ignored \"-Wint-conversion\"")		    \
	return ____##name(___bpf_ctx_cast(args));			    \
	_Pragma("GCC diagnostic pop")					    \
}									    \
static __always_inline typeof(name(0))					    \
____##name(unsigned long long *ctx, ##args)

#ifndef ___bpf_nth2
#define ___bpf_nth2(_, _1, _2, _3, _4, _5, _6, _7, _8, _9, _10, _11, _12, _13,	\
		    _14, _15, _16, _17, _18, _19, _20, _21, _22, _23, _24, N, ...) N
#endif
#ifndef ___bpf_narg2
#define ___bpf_narg2(...)	\
	___bpf_nth2(_, ##__VA_ARGS__, 12, 12, 11, 11, 10, 10, 9, 9, 8, 8, 7, 7,	\
		    6, 6, 5, 5, 4, 4, 3, 3, 2, 2, 1, 1, 0)
#endif

#define ___bpf_treg_cnt(t) \
	__builtin_choose_expr(sizeof(t) == 1, 1,	\
	__builtin_choose_expr(sizeof(t) == 2, 1,	\
	__builtin_choose_expr(sizeof(t) == 4, 1,	\
	__builtin_choose_expr(sizeof(t) == 8, 1,	\
	__builtin_choose_expr(sizeof(t) == 16, 2,	\
			      (void)0)))))

#define ___bpf_reg_cnt0()		(0)
#define ___bpf_reg_cnt1(t, x)		(___bpf_reg_cnt0() + ___bpf_treg_cnt(t))
#define ___bpf_reg_cnt2(t, x, args...)	(___bpf_reg_cnt1(args) + ___bpf_treg_cnt(t))
#define ___bpf_reg_cnt3(t, x, args...)	(___bpf_reg_cnt2(args) + ___bpf_treg_cnt(t))
#define ___bpf_reg_cnt4(t, x, args...)	(___bpf_reg_cnt3(args) + ___bpf_treg_cnt(t))
#define ___bpf_reg_cnt5(t, x, args...)	(___bpf_reg_cnt4(args) + ___bpf_treg_cnt(t))
#define ___bpf_reg_cnt6(t, x, args...)	(___bpf_reg_cnt5(args) + ___bpf_treg_cnt(t))
#define ___bpf_reg_cnt7(t, x, args...)	(___bpf_reg_cnt6(args) + ___bpf_treg_cnt(t))
#define ___bpf_reg_cnt8(t, x, args...)	(___bpf_reg_cnt7(args) + ___bpf_treg_cnt(t))
#define ___bpf_reg_cnt9(t, x, args...)	(___bpf_reg_cnt8(args) + ___bpf_treg_cnt(t))
#define ___bpf_reg_cnt10(t, x, args...)	(___bpf_reg_cnt9(args) + ___bpf_treg_cnt(t))
#define ___bpf_reg_cnt11(t, x, args...)	(___bpf_reg_cnt10(args) + ___bpf_treg_cnt(t))
#define ___bpf_reg_cnt12(t, x, args...)	(___bpf_reg_cnt11(args) + ___bpf_treg_cnt(t))
#define ___bpf_reg_cnt(args...)	 ___bpf_apply(___bpf_reg_cnt, ___bpf_narg2(args))(args)

#define ___bpf_union_arg(t, x, n) \
	__builtin_choose_expr(sizeof(t) == 1, ({ union { __u8 z[1]; t x; } ___t = { .z = {ctx[n]}}; ___t.x; }), \
	__builtin_choose_expr(sizeof(t) == 2, ({ union { __u16 z[1]; t x; } ___t = { .z = {ctx[n]} }; ___t.x; }), \
	__builtin_choose_expr(sizeof(t) == 4, ({ union { __u32 z[1]; t x; } ___t = { .z = {ctx[n]} }; ___t.x; }), \
	__builtin_choose_expr(sizeof(t) == 8, ({ union { __u64 z[1]; t x; } ___t = {.z = {ctx[n]} }; ___t.x; }), \
	__builtin_choose_expr(sizeof(t) == 16, ({ union { __u64 z[2]; t x; } ___t = {.z = {ctx[n], ctx[n + 1]} }; ___t.x; }), \
			      (void)0)))))

#define ___bpf_ctx_arg0(n, args...)
#define ___bpf_ctx_arg1(n, t, x)		, ___bpf_union_arg(t, x, n - ___bpf_reg_cnt1(t, x))
#define ___bpf_ctx_arg2(n, t, x, args...)	, ___bpf_union_arg(t, x, n - ___bpf_reg_cnt2(t, x, args)) ___bpf_ctx_arg1(n, args)
#define ___bpf_ctx_arg3(n, t, x, args...)	, ___bpf_union_arg(t, x, n - ___bpf_reg_cnt3(t, x, args)) ___bpf_ctx_arg2(n, args)
#define ___bpf_ctx_arg4(n, t, x, args...)	, ___bpf_union_arg(t, x, n - ___bpf_reg_cnt4(t, x, args)) ___bpf_ctx_arg3(n, args)
#define ___bpf_ctx_arg5(n, t, x, args...)	, ___bpf_union_arg(t, x, n - ___bpf_reg_cnt5(t, x, args)) ___bpf_ctx_arg4(n, args)
#define ___bpf_ctx_arg6(n, t, x, args...)	, ___bpf_union_arg(t, x, n - ___bpf_reg_cnt6(t, x, args)) ___bpf_ctx_arg5(n, args)
#define ___bpf_ctx_arg7(n, t, x, args...)	, ___bpf_union_arg(t, x, n - ___bpf_reg_cnt7(t, x, args)) ___bpf_ctx_arg6(n, args)
#define ___bpf_ctx_arg8(n, t, x, args...)	, ___bpf_union_arg(t, x, n - ___bpf_reg_cnt8(t, x, args)) ___bpf_ctx_arg7(n, args)
#define ___bpf_ctx_arg9(n, t, x, args...)	, ___bpf_union_arg(t, x, n - ___bpf_reg_cnt9(t, x, args)) ___bpf_ctx_arg8(n, args)
#define ___bpf_ctx_arg10(n, t, x, args...)	, ___bpf_union_arg(t, x, n - ___bpf_reg_cnt10(t, x, args)) ___bpf_ctx_arg9(n, args)
#define ___bpf_ctx_arg11(n, t, x, args...)	, ___bpf_union_arg(t, x, n - ___bpf_reg_cnt11(t, x, args)) ___bpf_ctx_arg10(n, args)
#define ___bpf_ctx_arg12(n, t, x, args...)	, ___bpf_union_arg(t, x, n - ___bpf_reg_cnt12(t, x, args)) ___bpf_ctx_arg11(n, args)
#define ___bpf_ctx_arg(args...)	___bpf_apply(___bpf_ctx_arg, ___bpf_narg2(args))(___bpf_reg_cnt(args), args)

#define ___bpf_ctx_decl0()
#define ___bpf_ctx_decl1(t, x)			, t x
#define ___bpf_ctx_decl2(t, x, args...)		, t x ___bpf_ctx_decl1(args)
#define ___bpf_ctx_decl3(t, x, args...)		, t x ___bpf_ctx_decl2(args)
#define ___bpf_ctx_decl4(t, x, args...)		, t x ___bpf_ctx_decl3(args)
#define ___bpf_ctx_decl5(t, x, args...)		, t x ___bpf_ctx_decl4(args)
#define ___bpf_ctx_decl6(t, x, args...)		, t x ___bpf_ctx_decl5(args)
#define ___bpf_ctx_decl7(t, x, args...)		, t x ___bpf_ctx_decl6(args)
#define ___bpf_ctx_decl8(t, x, args...)		, t x ___bpf_ctx_decl7(args)
#define ___bpf_ctx_decl9(t, x, args...)		, t x ___bpf_ctx_decl8(args)
#define ___bpf_ctx_decl10(t, x, args...)	, t x ___bpf_ctx_decl9(args)
#define ___bpf_ctx_decl11(t, x, args...)	, t x ___bpf_ctx_decl10(args)
#define ___bpf_ctx_decl12(t, x, args...)	, t x ___bpf_ctx_decl11(args)
#define ___bpf_ctx_decl(args...)	___bpf_apply(___bpf_ctx_decl, ___bpf_narg2(args))(args)

/*
 * BPF_PROG2 is an enhanced version of BPF_PROG in order to handle struct
 * arguments. Since each struct argument might take one or two u64 values
 * in the trampoline stack, argument type size is needed to place proper number
 * of u64 values for each argument. Therefore, BPF_PROG2 has different
 * syntax from BPF_PROG. For example, for the following BPF_PROG syntax:
 *
 *   int BPF_PROG(test2, int a, int b) { ... }
 *
 * the corresponding BPF_PROG2 syntax is:
 *
 *   int BPF_PROG2(test2, int, a, int, b) { ... }
 *
 * where type and the corresponding argument name are separated by comma.
 *
 * Use BPF_PROG2 macro if one of the arguments might be a struct/union larger
 * than 8 bytes:
 *
 *   int BPF_PROG2(test_struct_arg, struct bpf_testmod_struct_arg_1, a, int, b,
 *		   int, c, int, d, struct bpf_testmod_struct_arg_2, e, int, ret)
 *   {
 *        // access a, b, c, d, e, and ret directly
 *        ...
 *   }
 */
#define BPF_PROG2(name, args...)						\
name(unsigned long long *ctx);							\
static __always_inline typeof(name(0))						\
____##name(unsigned long long *ctx ___bpf_ctx_decl(args));			\
typeof(name(0)) name(unsigned long long *ctx)					\
{										\
	return ____##name(ctx ___bpf_ctx_arg(args));				\
}										\
static __always_inline typeof(name(0))						\
____##name(unsigned long long *ctx ___bpf_ctx_decl(args))

struct pt_regs;

#define ___bpf_kprobe_args0()           ctx
#define ___bpf_kprobe_args1(x)          ___bpf_kprobe_args0(), (unsigned long long)PT_REGS_PARM1(ctx)
#define ___bpf_kprobe_args2(x, args...) ___bpf_kprobe_args1(args), (unsigned long long)PT_REGS_PARM2(ctx)
#define ___bpf_kprobe_args3(x, args...) ___bpf_kprobe_args2(args), (unsigned long long)PT_REGS_PARM3(ctx)
#define ___bpf_kprobe_args4(x, args...) ___bpf_kprobe_args3(args), (unsigned long long)PT_REGS_PARM4(ctx)
#define ___bpf_kprobe_args5(x, args...) ___bpf_kprobe_args4(args), (unsigned long long)PT_REGS_PARM5(ctx)
#define ___bpf_kprobe_args6(x, args...) ___bpf_kprobe_args5(args), (unsigned long long)PT_REGS_PARM6(ctx)
#define ___bpf_kprobe_args7(x, args...) ___bpf_kprobe_args6(args), (unsigned long long)PT_REGS_PARM7(ctx)
#define ___bpf_kprobe_args8(x, args...) ___bpf_kprobe_args7(args), (unsigned long long)PT_REGS_PARM8(ctx)
#define ___bpf_kprobe_args(args...)     ___bpf_apply(___bpf_kprobe_args, ___bpf_narg(args))(args)

/*
 * BPF_KPROBE serves the same purpose for kprobes as BPF_PROG for
 * tp_btf/fentry/fexit BPF programs. It hides the underlying platform-specific
 * low-level way of getting kprobe input arguments from struct pt_regs, and
 * provides a familiar typed and named function arguments syntax and
 * semantics of accessing kprobe input parameters.
 *
 * Original struct pt_regs* context is preserved as 'ctx' argument. This might
 * be necessary when using BPF helpers like bpf_perf_event_output().
 */
#define BPF_KPROBE(name, args...)					    \
name(struct pt_regs *ctx);						    \
static __always_inline typeof(name(0))					    \
____##name(struct pt_regs *ctx, ##args);				    \
typeof(name(0)) name(struct pt_regs *ctx)				    \
{									    \
	_Pragma("GCC diagnostic push")					    \
	_Pragma("GCC diagnostic ignored \"-Wint-conversion\"")		    \
	return ____##name(___bpf_kprobe_args(args));			    \
	_Pragma("GCC diagnostic pop")					    \
}									    \
static __always_inline typeof(name(0))					    \
____##name(struct pt_regs *ctx, ##args)

#define ___bpf_kretprobe_args0()       ctx
#define ___bpf_kretprobe_args1(x)      ___bpf_kretprobe_args0(), (unsigned long long)PT_REGS_RC(ctx)
#define ___bpf_kretprobe_args(args...) ___bpf_apply(___bpf_kretprobe_args, ___bpf_narg(args))(args)

/*
 * BPF_KRETPROBE is similar to BPF_KPROBE, except, it only provides optional
 * return value (in addition to `struct pt_regs *ctx`), but no input
 * arguments, because they will be clobbered by the time probed function
 * returns.
 */
#define BPF_KRETPROBE(name, args...)					    \
name(struct pt_regs *ctx);						    \
static __always_inline typeof(name(0))					    \
____##name(struct pt_regs *ctx, ##args);				    \
typeof(name(0)) name(struct pt_regs *ctx)				    \
{									    \
	_Pragma("GCC diagnostic push")					    \
	_Pragma("GCC diagnostic ignored \"-Wint-conversion\"")		    \
	return ____##name(___bpf_kretprobe_args(args));			    \
	_Pragma("GCC diagnostic pop")					    \
}									    \
static __always_inline typeof(name(0)) ____##name(struct pt_regs *ctx, ##args)

/* If kernel has CONFIG_ARCH_HAS_SYSCALL_WRAPPER, read pt_regs directly */
#define ___bpf_syscall_args0()           ctx
#define ___bpf_syscall_args1(x)          ___bpf_syscall_args0(), (unsigned long long)PT_REGS_PARM1_SYSCALL(regs)
#define ___bpf_syscall_args2(x, args...) ___bpf_syscall_args1(args), (unsigned long long)PT_REGS_PARM2_SYSCALL(regs)
#define ___bpf_syscall_args3(x, args...) ___bpf_syscall_args2(args), (unsigned long long)PT_REGS_PARM3_SYSCALL(regs)
#define ___bpf_syscall_args4(x, args...) ___bpf_syscall_args3(args), (unsigned long long)PT_REGS_PARM4_SYSCALL(regs)
#define ___bpf_syscall_args5(x, args...) ___bpf_syscall_args4(args), (unsigned long long)PT_REGS_PARM5_SYSCALL(regs)
#define ___bpf_syscall_args6(x, args...) ___bpf_syscall_args5(args), (unsigned long long)PT_REGS_PARM6_SYSCALL(regs)
#define ___bpf_syscall_args7(x, args...) ___bpf_syscall_args6(args), (unsigned long long)PT_REGS_PARM7_SYSCALL(regs)
#define ___bpf_syscall_args(args...)     ___bpf_apply(___bpf_syscall_args, ___bpf_narg(args))(args)

/* If kernel doesn't have CONFIG_ARCH_HAS_SYSCALL_WRAPPER, we have to BPF_CORE_READ from pt_regs */
#define ___bpf_syswrap_args0()           ctx
#define ___bpf_syswrap_args1(x)          ___bpf_syswrap_args0(), (unsigned long long)PT_REGS_PARM1_CORE_SYSCALL(regs)
#define ___bpf_syswrap_args2(x, args...) ___bpf_syswrap_args1(args), (unsigned long long)PT_REGS_PARM2_CORE_SYSCALL(regs)
#define ___bpf_syswrap_args3(x, args...) ___bpf_syswrap_args2(args), (unsigned long long)PT_REGS_PARM3_CORE_SYSCALL(regs)
#define ___bpf_syswrap_args4(x, args...) ___bpf_syswrap_args3(args), (unsigned long long)PT_REGS_PARM4_CORE_SYSCALL(regs)
#define ___bpf_syswrap_args5(x, args...) ___bpf_syswrap_args4(args), (unsigned long long)PT_REGS_PARM5_CORE_SYSCALL(regs)
#define ___bpf_syswrap_args6(x, args...) ___bpf_syswrap_args5(args), (unsigned long long)PT_REGS_PARM6_CORE_SYSCALL(regs)
#define ___bpf_syswrap_args7(x, args...) ___bpf_syswrap_args6(args), (unsigned long long)PT_REGS_PARM7_CORE_SYSCALL(regs)
#define ___bpf_syswrap_args(args...)     ___bpf_apply(___bpf_syswrap_args, ___bpf_narg(args))(args)

/*
 * BPF_KSYSCALL is a variant of BPF_KPROBE, which is intended for
 * tracing syscall functions, like __x64_sys_close. It hides the underlying
 * platform-specific low-level way of getting syscall input arguments from
 * struct pt_regs, and provides a familiar typed and named function arguments
 * syntax and semantics of accessing syscall input parameters.
 *
 * Original struct pt_regs * context is preserved as 'ctx' argument. This might
 * be necessary when using BPF helpers like bpf_perf_event_output().
 *
 * At the moment BPF_KSYSCALL does not transparently handle all the calling
 * convention quirks for the following syscalls:
 *
 * - mmap(): __ARCH_WANT_SYS_OLD_MMAP.
 * - clone(): CONFIG_CLONE_BACKWARDS, CONFIG_CLONE_BACKWARDS2 and
 *            CONFIG_CLONE_BACKWARDS3.
 * - socket-related syscalls: __ARCH_WANT_SYS_SOCKETCALL.
 * - compat syscalls.
 *
 * This may or may not change in the future. User needs to take extra measures
 * to handle such quirks explicitly, if necessary.
 *
 * This macro relies on BPF CO-RE support and virtual __kconfig externs.
 */
#define BPF_KSYSCALL(name, args...)					    \
name(struct pt_regs *ctx);						    \
extern _Bool LINUX_HAS_SYSCALL_WRAPPER __kconfig;			    \
static __always_inline typeof(name(0))					    \
____##name(struct pt_regs *ctx, ##args);				    \
typeof(name(0)) name(struct pt_regs *ctx)				    \
{									    \
	struct pt_regs *regs = LINUX_HAS_SYSCALL_WRAPPER		    \
			       ? (struct pt_regs *)PT_REGS_PARM1(ctx)	    \
			       : ctx;					    \
	_Pragma("GCC diagnostic push")					    \
	_Pragma("GCC diagnostic ignored \"-Wint-conversion\"")		    \
	if (LINUX_HAS_SYSCALL_WRAPPER)					    \
		return ____##name(___bpf_syswrap_args(args));		    \
	else								    \
		return ____##name(___bpf_syscall_args(args));		    \
	_Pragma("GCC diagnostic pop")					    \
}									    \
static __always_inline typeof(name(0))					    \
____##name(struct pt_regs *ctx, ##args)

#define BPF_KPROBE_SYSCALL BPF_KSYSCALL

/* BPF_UPROBE and BPF_URETPROBE are identical to BPF_KPROBE and BPF_KRETPROBE,
 * but are named way less confusingly for SEC("uprobe") and SEC("uretprobe")
 * use cases.
 */
#define BPF_UPROBE(name, args...)  BPF_KPROBE(name, ##args)
#define BPF_URETPROBE(name, args...)  BPF_KRETPROBE(name, ##args)

#endif