drm: convert crtc and connection_mutex to ww_mutex (v5)
For atomic, it will be quite necessary to not need to care so much
about locking order. And 'state' gives us a convenient place to stash a
ww_ctx for any sort of update that needs to grab multiple crtc locks.
Because we will want to eventually make locking even more fine grained
(giving locks to planes, connectors, etc), split out drm_modeset_lock
and drm_modeset_acquire_ctx to track acquired locks.
Atomic will use this to keep track of which locks have been acquired
in a transaction.
v1: original
v2: remove a few things not needed until atomic, for now
v3: update for v3 of connection_mutex patch..
v4: squash in docbook
v5: doc tweaks/fixes
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index c2976ad..1ce4ad4 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -2576,7 +2576,7 @@
for_each_crtc(dev, crtc) {
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
- mutex_lock(&crtc->mutex);
+ drm_modeset_lock(&crtc->mutex, NULL);
/*
* FIXME: Once we have proper support for primary planes (and
* disabling them without disabling the entire crtc) allow again
@@ -2587,7 +2587,7 @@
crtc->primary->fb,
crtc->x,
crtc->y);
- mutex_unlock(&crtc->mutex);
+ drm_modeset_unlock(&crtc->mutex);
}
}
@@ -8307,7 +8307,8 @@
bool intel_get_load_detect_pipe(struct drm_connector *connector,
struct drm_display_mode *mode,
- struct intel_load_detect_pipe *old)
+ struct intel_load_detect_pipe *old,
+ struct drm_modeset_acquire_ctx *ctx)
{
struct intel_crtc *intel_crtc;
struct intel_encoder *intel_encoder =
@@ -8317,13 +8318,19 @@
struct drm_crtc *crtc = NULL;
struct drm_device *dev = encoder->dev;
struct drm_framebuffer *fb;
- int i = -1;
+ struct drm_mode_config *config = &dev->mode_config;
+ int ret, i = -1;
DRM_DEBUG_KMS("[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
connector->base.id, connector->name,
encoder->base.id, encoder->name);
- mutex_lock(&dev->mode_config.connection_mutex);
+ drm_modeset_acquire_init(ctx, 0);
+
+retry:
+ ret = drm_modeset_lock(&config->connection_mutex, ctx);
+ if (ret)
+ goto fail_unlock;
/*
* Algorithm gets a little messy:
@@ -8339,7 +8346,9 @@
if (encoder->crtc) {
crtc = encoder->crtc;
- mutex_lock(&crtc->mutex);
+ ret = drm_modeset_lock(&crtc->mutex, ctx);
+ if (ret)
+ goto fail_unlock;
old->dpms_mode = connector->dpms;
old->load_detect_temp = false;
@@ -8367,10 +8376,12 @@
*/
if (!crtc) {
DRM_DEBUG_KMS("no pipe available for load-detect\n");
- goto fail_unlock_connector;
+ goto fail_unlock;
}
- mutex_lock(&crtc->mutex);
+ ret = drm_modeset_lock(&crtc->mutex, ctx);
+ if (ret)
+ goto fail_unlock;
intel_encoder->new_crtc = to_intel_crtc(crtc);
to_intel_connector(connector)->new_encoder = intel_encoder;
@@ -8420,15 +8431,21 @@
intel_crtc->new_config = &intel_crtc->config;
else
intel_crtc->new_config = NULL;
- mutex_unlock(&crtc->mutex);
-fail_unlock_connector:
- mutex_unlock(&dev->mode_config.connection_mutex);
+fail_unlock:
+ if (ret == -EDEADLK) {
+ drm_modeset_backoff(ctx);
+ goto retry;
+ }
+
+ drm_modeset_drop_locks(ctx);
+ drm_modeset_acquire_fini(ctx);
return false;
}
void intel_release_load_detect_pipe(struct drm_connector *connector,
- struct intel_load_detect_pipe *old)
+ struct intel_load_detect_pipe *old,
+ struct drm_modeset_acquire_ctx *ctx)
{
struct intel_encoder *intel_encoder =
intel_attached_encoder(connector);
@@ -8452,8 +8469,7 @@
drm_framebuffer_unreference(old->release_fb);
}
- mutex_unlock(&crtc->mutex);
- mutex_unlock(&connector->dev->mode_config.connection_mutex);
+ goto unlock;
return;
}
@@ -8461,8 +8477,9 @@
if (old->dpms_mode != DRM_MODE_DPMS_ON)
connector->funcs->dpms(connector, old->dpms_mode);
- mutex_unlock(&crtc->mutex);
- mutex_unlock(&connector->dev->mode_config.connection_mutex);
+unlock:
+ drm_modeset_drop_locks(ctx);
+ drm_modeset_acquire_fini(ctx);
}
static int i9xx_pll_refclk(struct drm_device *dev,
@@ -10995,7 +11012,7 @@
struct drm_encoder *encoder = connector->base.encoder;
struct drm_device *dev = connector->base.dev;
- WARN_ON(!mutex_is_locked(&dev->mode_config.connection_mutex));
+ WARN_ON(!drm_modeset_is_locked(&dev->mode_config.connection_mutex));
if (!encoder)
return INVALID_PIPE;
@@ -11805,6 +11822,7 @@
struct intel_connector *connector;
struct drm_connector *crt = NULL;
struct intel_load_detect_pipe load_detect_temp;
+ struct drm_modeset_acquire_ctx ctx;
/* We can't just switch on the pipe A, we need to set things up with a
* proper mode and output configuration. As a gross hack, enable pipe A
@@ -11821,8 +11839,8 @@
if (!crt)
return;
- if (intel_get_load_detect_pipe(crt, NULL, &load_detect_temp))
- intel_release_load_detect_pipe(crt, &load_detect_temp);
+ if (intel_get_load_detect_pipe(crt, NULL, &load_detect_temp, &ctx))
+ intel_release_load_detect_pipe(crt, &load_detect_temp, &ctx);
}
