[CPUFREQ] Support Model D parts and newer in e_powersaver
Patch by VIA that updates e_powersaver.c to work with our model D parts
and newer.
From: Jesse Ahrens <jahrens@centtech.com>
Signed-off-by: Dave Jones <davej@redhat.com>
diff --git a/arch/x86/kernel/cpu/cpufreq/e_powersaver.c b/arch/x86/kernel/cpu/cpufreq/e_powersaver.c
index 326a4c8..34a227e 100644
--- a/arch/x86/kernel/cpu/cpufreq/e_powersaver.c
+++ b/arch/x86/kernel/cpu/cpufreq/e_powersaver.c
@@ -23,6 +23,7 @@
#define EPS_BRAND_C7 1
#define EPS_BRAND_EDEN 2
#define EPS_BRAND_C3 3
+#define EPS_BRAND_C7D 4
struct eps_cpu_data {
u32 fsb;
@@ -54,6 +55,7 @@
{
struct cpufreq_freqs freqs;
u32 lo, hi;
+ u8 current_multiplier, current_voltage;
int err = 0;
int i;
@@ -93,6 +95,15 @@
rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
freqs.new = centaur->fsb * ((lo >> 8) & 0xff);
+ /* Print voltage and multiplier */
+ rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
+ current_voltage = lo & 0xff;
+ printk(KERN_INFO "eps: Current voltage = %dmV\n",
+ current_voltage * 16 + 700);
+ current_multiplier = (lo >> 8) & 0xff;
+ printk(KERN_INFO "eps: Current multiplier = %d\n",
+ current_multiplier);
+
cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
return err;
}
@@ -141,9 +152,10 @@
u8 current_multiplier, current_voltage;
u8 max_multiplier, max_voltage;
u8 min_multiplier, min_voltage;
- u8 brand;
+ u8 brand = 0;
u32 fsb;
struct eps_cpu_data *centaur;
+ struct cpuinfo_x86 *c = &cpu_data(0);
struct cpufreq_frequency_table *f_table;
int k, step, voltage;
int ret;
@@ -154,8 +166,20 @@
/* Check brand */
printk("eps: Detected VIA ");
- rdmsr(0x1153, lo, hi);
- brand = (((lo >> 2) ^ lo) >> 18) & 3;
+
+ switch (c->x86_model) {
+ case 10:
+ rdmsr(0x1153, lo, hi);
+ brand = (((lo >> 2) ^ lo) >> 18) & 3;
+ printk(KERN_CONT "Model A ");
+ break;
+ case 13:
+ rdmsr(0x1154, lo, hi);
+ brand = (((lo >> 4) ^ (lo >> 2))) & 0x000000ff;
+ printk(KERN_CONT "Model D ");
+ break;
+ }
+
switch(brand) {
case EPS_BRAND_C7M:
printk("C7-M\n");
@@ -166,6 +190,9 @@
case EPS_BRAND_EDEN:
printk("Eden\n");
break;
+ case EPS_BRAND_C7D:
+ printk(KERN_CONT "C7-D\n");
+ break;
case EPS_BRAND_C3:
printk("C3\n");
return -ENODEV;
@@ -208,7 +235,7 @@
if (current_multiplier > max_multiplier
|| max_multiplier <= min_multiplier)
return -EINVAL;
- if (current_voltage > 0x1c || max_voltage > 0x1c)
+ if (current_voltage > 0x1f || max_voltage > 0x1f)
return -EINVAL;
if (max_voltage < min_voltage)
return -EINVAL;
@@ -310,7 +337,7 @@
/* This driver will work only on Centaur C7 processors with
* Enhanced SpeedStep/PowerSaver registers */
if (c->x86_vendor != X86_VENDOR_CENTAUR
- || c->x86 != 6 || c->x86_model != 10)
+ || c->x86 != 6 || c->x86_model < 10)
return -ENODEV;
if (!cpu_has(c, X86_FEATURE_EST))
return -ENODEV;
