Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Pull powerpc merge from Benjamin Herrenschmidt:
"Here's the powerpc batch for this merge window. It is going to be a
bit more nasty than usual as in touching things outside of
arch/powerpc mostly due to the big iSeriesectomy :-) We finally got
rid of the bugger (legacy iSeries support) which was a PITA to
maintain and that nobody really used anymore.
Here are some of the highlights:
- Legacy iSeries is gone. Thanks Stephen ! There's still some bits
and pieces remaining if you do a grep -ir series arch/powerpc but
they are harmless and will be removed in the next few weeks
hopefully.
- The 'fadump' functionality (Firmware Assisted Dump) replaces the
previous (equivalent) "pHyp assisted dump"... it's a rewrite of a
mechanism to get the hypervisor to do crash dumps on pSeries, the
new implementation hopefully being much more reliable. Thanks
Mahesh Salgaonkar.
- The "EEH" code (pSeries PCI error handling & recovery) got a big
spring cleaning, motivated by the need to be able to implement a
new backend for it on top of some new different type of firwmare.
The work isn't complete yet, but a good chunk of the cleanups is
there. Note that this adds a field to struct device_node which is
not very nice and which Grant objects to. I will have a patch soon
that moves that to a powerpc private data structure (hopefully
before rc1) and we'll improve things further later on (hopefully
getting rid of the need for that pointer completely). Thanks Gavin
Shan.
- I dug into our exception & interrupt handling code to improve the
way we do lazy interrupt handling (and make it work properly with
"edge" triggered interrupt sources), and while at it found & fixed
a wagon of issues in those areas, including adding support for page
fault retry & fatal signals on page faults.
- Your usual random batch of small fixes & updates, including a bunch
of new embedded boards, both Freescale and APM based ones, etc..."
I fixed up some conflicts with the generalized irq-domain changes from
Grant Likely, hopefully correctly.
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (141 commits)
powerpc/ps3: Do not adjust the wrapper load address
powerpc: Remove the rest of the legacy iSeries include files
powerpc: Remove the remaining CONFIG_PPC_ISERIES pieces
init: Remove CONFIG_PPC_ISERIES
powerpc: Remove FW_FEATURE ISERIES from arch code
tty/hvc_vio: FW_FEATURE_ISERIES is no longer selectable
powerpc/spufs: Fix double unlocks
powerpc/5200: convert mpc5200 to use of_platform_populate()
powerpc/mpc5200: add options to mpc5200_defconfig
powerpc/mpc52xx: add a4m072 board support
powerpc/mpc5200: update mpc5200_defconfig to fit for charon board
Documentation/powerpc/mpc52xx.txt: Checkpatch cleanup
powerpc/44x: Add additional device support for APM821xx SoC and Bluestone board
powerpc/44x: Add support PCI-E for APM821xx SoC and Bluestone board
MAINTAINERS: Update PowerPC 4xx tree
powerpc/44x: The bug fixed support for APM821xx SoC and Bluestone board
powerpc: document the FSL MPIC message register binding
powerpc: add support for MPIC message register API
powerpc/fsl: Added aliased MSIIR register address to MSI node in dts
powerpc/85xx: mpc8548cds - add 36-bit dts
...
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index c83a512..9ac71eb 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -873,7 +873,7 @@
DBG("mpic: set_irq_type(mpic:@%p,virq:%d,src:0x%x,type:0x%x)\n",
mpic, d->irq, src, flow_type);
- if (src >= mpic->irq_count)
+ if (src >= mpic->num_sources)
return -EINVAL;
if (flow_type == IRQ_TYPE_NONE)
@@ -909,7 +909,7 @@
DBG("mpic: set_vector(mpic:@%p,virq:%d,src:%d,vector:0x%x)\n",
mpic, virq, src, vector);
- if (src >= mpic->irq_count)
+ if (src >= mpic->num_sources)
return;
vecpri = mpic_irq_read(src, MPIC_INFO(IRQ_VECTOR_PRI));
@@ -926,7 +926,7 @@
DBG("mpic: set_destination(mpic:@%p,virq:%d,src:%d,cpuid:0x%x)\n",
mpic, virq, src, cpuid);
- if (src >= mpic->irq_count)
+ if (src >= mpic->num_sources)
return;
mpic_irq_write(src, MPIC_INFO(IRQ_DESTINATION), 1 << cpuid);
@@ -1006,7 +1006,7 @@
return 0;
}
- if (hw >= mpic->irq_count)
+ if (hw >= mpic->num_sources)
return -EINVAL;
mpic_msi_reserve_hwirq(mpic, hw);
@@ -1149,6 +1149,7 @@
u32 greg_feature;
const char *vers;
const u32 *psrc;
+ u32 last_irq;
/* Default MPIC search parameters */
static const struct of_device_id __initconst mpic_device_id[] = {
@@ -1182,6 +1183,16 @@
}
}
+ /* Read extra device-tree properties into the flags variable */
+ if (of_get_property(node, "big-endian", NULL))
+ flags |= MPIC_BIG_ENDIAN;
+ if (of_get_property(node, "pic-no-reset", NULL))
+ flags |= MPIC_NO_RESET;
+ if (of_get_property(node, "single-cpu-affinity", NULL))
+ flags |= MPIC_SINGLE_DEST_CPU;
+ if (of_device_is_compatible(node, "fsl,mpic"))
+ flags |= MPIC_FSL;
+
mpic = kzalloc(sizeof(struct mpic), GFP_KERNEL);
if (mpic == NULL)
goto err_of_node_put;
@@ -1189,15 +1200,16 @@
mpic->name = name;
mpic->node = node;
mpic->paddr = phys_addr;
+ mpic->flags = flags;
mpic->hc_irq = mpic_irq_chip;
mpic->hc_irq.name = name;
- if (!(flags & MPIC_SECONDARY))
+ if (!(mpic->flags & MPIC_SECONDARY))
mpic->hc_irq.irq_set_affinity = mpic_set_affinity;
#ifdef CONFIG_MPIC_U3_HT_IRQS
mpic->hc_ht_irq = mpic_irq_ht_chip;
mpic->hc_ht_irq.name = name;
- if (!(flags & MPIC_SECONDARY))
+ if (!(mpic->flags & MPIC_SECONDARY))
mpic->hc_ht_irq.irq_set_affinity = mpic_set_affinity;
#endif /* CONFIG_MPIC_U3_HT_IRQS */
@@ -1209,12 +1221,9 @@
mpic->hc_tm = mpic_tm_chip;
mpic->hc_tm.name = name;
- mpic->flags = flags;
- mpic->isu_size = isu_size;
- mpic->irq_count = irq_count;
mpic->num_sources = 0; /* so far */
- if (flags & MPIC_LARGE_VECTORS)
+ if (mpic->flags & MPIC_LARGE_VECTORS)
intvec_top = 2047;
else
intvec_top = 255;
@@ -1233,12 +1242,6 @@
mpic->ipi_vecs[3] = intvec_top - 1;
mpic->spurious_vec = intvec_top;
- /* Check for "big-endian" in device-tree */
- if (of_get_property(mpic->node, "big-endian", NULL) != NULL)
- mpic->flags |= MPIC_BIG_ENDIAN;
- if (of_device_is_compatible(mpic->node, "fsl,mpic"))
- mpic->flags |= MPIC_FSL;
-
/* Look for protected sources */
psrc = of_get_property(mpic->node, "protected-sources", &psize);
if (psrc) {
@@ -1254,11 +1257,11 @@
}
#ifdef CONFIG_MPIC_WEIRD
- mpic->hw_set = mpic_infos[MPIC_GET_REGSET(flags)];
+ mpic->hw_set = mpic_infos[MPIC_GET_REGSET(mpic->flags)];
#endif
/* default register type */
- if (flags & MPIC_BIG_ENDIAN)
+ if (mpic->flags & MPIC_BIG_ENDIAN)
mpic->reg_type = mpic_access_mmio_be;
else
mpic->reg_type = mpic_access_mmio_le;
@@ -1268,10 +1271,10 @@
* only if the kernel includes DCR support.
*/
#ifdef CONFIG_PPC_DCR
- if (flags & MPIC_USES_DCR)
+ if (mpic->flags & MPIC_USES_DCR)
mpic->reg_type = mpic_access_dcr;
#else
- BUG_ON(flags & MPIC_USES_DCR);
+ BUG_ON(mpic->flags & MPIC_USES_DCR);
#endif
/* Map the global registers */
@@ -1283,10 +1286,7 @@
/* When using a device-node, reset requests are only honored if the MPIC
* is allowed to reset.
*/
- if (of_get_property(mpic->node, "pic-no-reset", NULL))
- mpic->flags |= MPIC_NO_RESET;
-
- if ((flags & MPIC_WANTS_RESET) && !(mpic->flags & MPIC_NO_RESET)) {
+ if (!(mpic->flags & MPIC_NO_RESET)) {
printk(KERN_DEBUG "mpic: Resetting\n");
mpic_write(mpic->gregs, MPIC_INFO(GREG_GLOBAL_CONF_0),
mpic_read(mpic->gregs, MPIC_INFO(GREG_GLOBAL_CONF_0))
@@ -1297,31 +1297,17 @@
}
/* CoreInt */
- if (flags & MPIC_ENABLE_COREINT)
+ if (mpic->flags & MPIC_ENABLE_COREINT)
mpic_write(mpic->gregs, MPIC_INFO(GREG_GLOBAL_CONF_0),
mpic_read(mpic->gregs, MPIC_INFO(GREG_GLOBAL_CONF_0))
| MPIC_GREG_GCONF_COREINT);
- if (flags & MPIC_ENABLE_MCK)
+ if (mpic->flags & MPIC_ENABLE_MCK)
mpic_write(mpic->gregs, MPIC_INFO(GREG_GLOBAL_CONF_0),
mpic_read(mpic->gregs, MPIC_INFO(GREG_GLOBAL_CONF_0))
| MPIC_GREG_GCONF_MCK);
/*
- * Read feature register. For non-ISU MPICs, num sources as well. On
- * ISU MPICs, sources are counted as ISUs are added
- */
- greg_feature = mpic_read(mpic->gregs, MPIC_INFO(GREG_FEATURE_0));
- if (isu_size == 0) {
- if (flags & MPIC_BROKEN_FRR_NIRQS)
- mpic->num_sources = mpic->irq_count;
- else
- mpic->num_sources =
- ((greg_feature & MPIC_GREG_FEATURE_LAST_SRC_MASK)
- >> MPIC_GREG_FEATURE_LAST_SRC_SHIFT) + 1;
- }
-
- /*
* The MPIC driver will crash if there are more cores than we
* can initialize, so we may as well catch that problem here.
*/
@@ -1336,17 +1322,41 @@
0x1000);
}
+ /*
+ * Read feature register. For non-ISU MPICs, num sources as well. On
+ * ISU MPICs, sources are counted as ISUs are added
+ */
+ greg_feature = mpic_read(mpic->gregs, MPIC_INFO(GREG_FEATURE_0));
+
+ /*
+ * By default, the last source number comes from the MPIC, but the
+ * device-tree and board support code can override it on buggy hw.
+ * If we get passed an isu_size (multi-isu MPIC) then we use that
+ * as a default instead of the value read from the HW.
+ */
+ last_irq = (greg_feature & MPIC_GREG_FEATURE_LAST_SRC_MASK)
+ >> MPIC_GREG_FEATURE_LAST_SRC_SHIFT;
+ if (isu_size)
+ last_irq = isu_size * MPIC_MAX_ISU - 1;
+ of_property_read_u32(mpic->node, "last-interrupt-source", &last_irq);
+ if (irq_count)
+ last_irq = irq_count - 1;
+
/* Initialize main ISU if none provided */
- if (mpic->isu_size == 0) {
- mpic->isu_size = mpic->num_sources;
+ if (!isu_size) {
+ isu_size = last_irq + 1;
+ mpic->num_sources = isu_size;
mpic_map(mpic, mpic->paddr, &mpic->isus[0],
- MPIC_INFO(IRQ_BASE), MPIC_INFO(IRQ_STRIDE) * mpic->isu_size);
+ MPIC_INFO(IRQ_BASE),
+ MPIC_INFO(IRQ_STRIDE) * isu_size);
}
+
+ mpic->isu_size = isu_size;
mpic->isu_shift = 1 + __ilog2(mpic->isu_size - 1);
mpic->isu_mask = (1 << mpic->isu_shift) - 1;
mpic->irqhost = irq_domain_add_linear(mpic->node,
- isu_size ? isu_size : mpic->num_sources,
+ last_irq + 1,
&mpic_host_ops, mpic);
/*
@@ -1380,7 +1390,7 @@
mpic->next = mpics;
mpics = mpic;
- if (!(flags & MPIC_SECONDARY)) {
+ if (!(mpic->flags & MPIC_SECONDARY)) {
mpic_primary = mpic;
irq_set_default_host(mpic->irqhost);
}
@@ -1447,10 +1457,6 @@
(mpic->ipi_vecs[0] + i));
}
- /* Initialize interrupt sources */
- if (mpic->irq_count == 0)
- mpic->irq_count = mpic->num_sources;
-
/* Do the HT PIC fixups on U3 broken mpic */
DBG("MPIC flags: %x\n", mpic->flags);
if ((mpic->flags & MPIC_U3_HT_IRQS) && !(mpic->flags & MPIC_SECONDARY)) {
