| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * addi_apci_16xx.c |
| * Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. |
| * Project manager: S. Weber |
| * |
| * ADDI-DATA GmbH |
| * Dieselstrasse 3 |
| * D-77833 Ottersweier |
| * Tel: +19(0)7223/9493-0 |
| * Fax: +49(0)7223/9493-92 |
| * http://www.addi-data.com |
| * info@addi-data.com |
| */ |
| |
| #include <linux/module.h> |
| |
| #include "../comedi_pci.h" |
| |
| /* |
| * Register I/O map |
| */ |
| #define APCI16XX_IN_REG(x) (((x) * 4) + 0x08) |
| #define APCI16XX_OUT_REG(x) (((x) * 4) + 0x14) |
| #define APCI16XX_DIR_REG(x) (((x) * 4) + 0x20) |
| |
| enum apci16xx_boardid { |
| BOARD_APCI1648, |
| BOARD_APCI1696, |
| }; |
| |
| struct apci16xx_boardinfo { |
| const char *name; |
| int n_chan; |
| }; |
| |
| static const struct apci16xx_boardinfo apci16xx_boardtypes[] = { |
| [BOARD_APCI1648] = { |
| .name = "apci1648", |
| .n_chan = 48, /* 2 subdevices */ |
| }, |
| [BOARD_APCI1696] = { |
| .name = "apci1696", |
| .n_chan = 96, /* 3 subdevices */ |
| }, |
| }; |
| |
| static int apci16xx_insn_config(struct comedi_device *dev, |
| struct comedi_subdevice *s, |
| struct comedi_insn *insn, |
| unsigned int *data) |
| { |
| unsigned int chan = CR_CHAN(insn->chanspec); |
| unsigned int mask; |
| int ret; |
| |
| if (chan < 8) |
| mask = 0x000000ff; |
| else if (chan < 16) |
| mask = 0x0000ff00; |
| else if (chan < 24) |
| mask = 0x00ff0000; |
| else |
| mask = 0xff000000; |
| |
| ret = comedi_dio_insn_config(dev, s, insn, data, mask); |
| if (ret) |
| return ret; |
| |
| outl(s->io_bits, dev->iobase + APCI16XX_DIR_REG(s->index)); |
| |
| return insn->n; |
| } |
| |
| static int apci16xx_dio_insn_bits(struct comedi_device *dev, |
| struct comedi_subdevice *s, |
| struct comedi_insn *insn, |
| unsigned int *data) |
| { |
| if (comedi_dio_update_state(s, data)) |
| outl(s->state, dev->iobase + APCI16XX_OUT_REG(s->index)); |
| |
| data[1] = inl(dev->iobase + APCI16XX_IN_REG(s->index)); |
| |
| return insn->n; |
| } |
| |
| static int apci16xx_auto_attach(struct comedi_device *dev, |
| unsigned long context) |
| { |
| struct pci_dev *pcidev = comedi_to_pci_dev(dev); |
| const struct apci16xx_boardinfo *board = NULL; |
| struct comedi_subdevice *s; |
| unsigned int n_subdevs; |
| unsigned int last; |
| int i; |
| int ret; |
| |
| if (context < ARRAY_SIZE(apci16xx_boardtypes)) |
| board = &apci16xx_boardtypes[context]; |
| if (!board) |
| return -ENODEV; |
| dev->board_ptr = board; |
| dev->board_name = board->name; |
| |
| ret = comedi_pci_enable(dev); |
| if (ret) |
| return ret; |
| |
| dev->iobase = pci_resource_start(pcidev, 0); |
| |
| /* |
| * Work out the number of subdevices needed to support all the |
| * digital i/o channels on the board. Each subdevice supports |
| * up to 32 channels. |
| */ |
| n_subdevs = board->n_chan / 32; |
| if ((n_subdevs * 32) < board->n_chan) { |
| last = board->n_chan - (n_subdevs * 32); |
| n_subdevs++; |
| } else { |
| last = 0; |
| } |
| |
| ret = comedi_alloc_subdevices(dev, n_subdevs); |
| if (ret) |
| return ret; |
| |
| /* Initialize the TTL digital i/o subdevices */ |
| for (i = 0; i < n_subdevs; i++) { |
| s = &dev->subdevices[i]; |
| s->type = COMEDI_SUBD_DIO; |
| s->subdev_flags = SDF_WRITABLE | SDF_READABLE; |
| s->n_chan = ((i * 32) < board->n_chan) ? 32 : last; |
| s->maxdata = 1; |
| s->range_table = &range_digital; |
| s->insn_config = apci16xx_insn_config; |
| s->insn_bits = apci16xx_dio_insn_bits; |
| |
| /* Default all channels to inputs */ |
| s->io_bits = 0; |
| outl(s->io_bits, dev->iobase + APCI16XX_DIR_REG(i)); |
| } |
| |
| return 0; |
| } |
| |
| static struct comedi_driver apci16xx_driver = { |
| .driver_name = "addi_apci_16xx", |
| .module = THIS_MODULE, |
| .auto_attach = apci16xx_auto_attach, |
| .detach = comedi_pci_detach, |
| }; |
| |
| static int apci16xx_pci_probe(struct pci_dev *dev, |
| const struct pci_device_id *id) |
| { |
| return comedi_pci_auto_config(dev, &apci16xx_driver, id->driver_data); |
| } |
| |
| static const struct pci_device_id apci16xx_pci_table[] = { |
| { PCI_VDEVICE(ADDIDATA, 0x1009), BOARD_APCI1648 }, |
| { PCI_VDEVICE(ADDIDATA, 0x100a), BOARD_APCI1696 }, |
| { 0 } |
| }; |
| MODULE_DEVICE_TABLE(pci, apci16xx_pci_table); |
| |
| static struct pci_driver apci16xx_pci_driver = { |
| .name = "addi_apci_16xx", |
| .id_table = apci16xx_pci_table, |
| .probe = apci16xx_pci_probe, |
| .remove = comedi_pci_auto_unconfig, |
| }; |
| module_comedi_pci_driver(apci16xx_driver, apci16xx_pci_driver); |
| |
| MODULE_DESCRIPTION("ADDI-DATA APCI-1648/1696, TTL I/O boards"); |
| MODULE_AUTHOR("Comedi https://www.comedi.org"); |
| MODULE_LICENSE("GPL"); |