| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * addi_apci_2200.c |
| * Copyright (C) 2004,2005 ADDI-DATA GmbH for the source code of this module. |
| * Project manager: Eric Stolz |
| * |
| * ADDI-DATA GmbH |
| * Dieselstrasse 3 |
| * D-77833 Ottersweier |
| * Tel: +19(0)7223/9493-0 |
| * Fax: +49(0)7223/9493-92 |
| * http://www.addi-data.com |
| * info@addi-data.com |
| */ |
| |
| #include <linux/module.h> |
| |
| #include "../comedi_pci.h" |
| #include "addi_watchdog.h" |
| |
| /* |
| * I/O Register Map |
| */ |
| #define APCI2200_DI_REG 0x00 |
| #define APCI2200_DO_REG 0x04 |
| #define APCI2200_WDOG_REG 0x08 |
| |
| static int apci2200_di_insn_bits(struct comedi_device *dev, |
| struct comedi_subdevice *s, |
| struct comedi_insn *insn, |
| unsigned int *data) |
| { |
| data[1] = inw(dev->iobase + APCI2200_DI_REG); |
| |
| return insn->n; |
| } |
| |
| static int apci2200_do_insn_bits(struct comedi_device *dev, |
| struct comedi_subdevice *s, |
| struct comedi_insn *insn, |
| unsigned int *data) |
| { |
| s->state = inw(dev->iobase + APCI2200_DO_REG); |
| |
| if (comedi_dio_update_state(s, data)) |
| outw(s->state, dev->iobase + APCI2200_DO_REG); |
| |
| data[1] = s->state; |
| |
| return insn->n; |
| } |
| |
| static int apci2200_reset(struct comedi_device *dev) |
| { |
| outw(0x0, dev->iobase + APCI2200_DO_REG); |
| |
| addi_watchdog_reset(dev->iobase + APCI2200_WDOG_REG); |
| |
| return 0; |
| } |
| |
| static int apci2200_auto_attach(struct comedi_device *dev, |
| unsigned long context_unused) |
| { |
| struct pci_dev *pcidev = comedi_to_pci_dev(dev); |
| struct comedi_subdevice *s; |
| int ret; |
| |
| ret = comedi_pci_enable(dev); |
| if (ret) |
| return ret; |
| |
| dev->iobase = pci_resource_start(pcidev, 1); |
| |
| ret = comedi_alloc_subdevices(dev, 3); |
| if (ret) |
| return ret; |
| |
| /* Initialize the digital input subdevice */ |
| s = &dev->subdevices[0]; |
| s->type = COMEDI_SUBD_DI; |
| s->subdev_flags = SDF_READABLE; |
| s->n_chan = 8; |
| s->maxdata = 1; |
| s->range_table = &range_digital; |
| s->insn_bits = apci2200_di_insn_bits; |
| |
| /* Initialize the digital output subdevice */ |
| s = &dev->subdevices[1]; |
| s->type = COMEDI_SUBD_DO; |
| s->subdev_flags = SDF_WRITABLE; |
| s->n_chan = 16; |
| s->maxdata = 1; |
| s->range_table = &range_digital; |
| s->insn_bits = apci2200_do_insn_bits; |
| |
| /* Initialize the watchdog subdevice */ |
| s = &dev->subdevices[2]; |
| ret = addi_watchdog_init(s, dev->iobase + APCI2200_WDOG_REG); |
| if (ret) |
| return ret; |
| |
| apci2200_reset(dev); |
| return 0; |
| } |
| |
| static void apci2200_detach(struct comedi_device *dev) |
| { |
| if (dev->iobase) |
| apci2200_reset(dev); |
| comedi_pci_detach(dev); |
| } |
| |
| static struct comedi_driver apci2200_driver = { |
| .driver_name = "addi_apci_2200", |
| .module = THIS_MODULE, |
| .auto_attach = apci2200_auto_attach, |
| .detach = apci2200_detach, |
| }; |
| |
| static int apci2200_pci_probe(struct pci_dev *dev, |
| const struct pci_device_id *id) |
| { |
| return comedi_pci_auto_config(dev, &apci2200_driver, id->driver_data); |
| } |
| |
| static const struct pci_device_id apci2200_pci_table[] = { |
| { PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x1005) }, |
| { 0 } |
| }; |
| MODULE_DEVICE_TABLE(pci, apci2200_pci_table); |
| |
| static struct pci_driver apci2200_pci_driver = { |
| .name = "addi_apci_2200", |
| .id_table = apci2200_pci_table, |
| .probe = apci2200_pci_probe, |
| .remove = comedi_pci_auto_unconfig, |
| }; |
| module_comedi_pci_driver(apci2200_driver, apci2200_pci_driver); |
| |
| MODULE_DESCRIPTION("ADDI-DATA APCI-2200 Relay board, optically isolated"); |
| MODULE_AUTHOR("Comedi https://www.comedi.org"); |
| MODULE_LICENSE("GPL"); |