| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * comedi/drivers/comedi_test.c |
| * |
| * Generates fake waveform signals that can be read through |
| * the command interface. It does _not_ read from any board; |
| * it just generates deterministic waveforms. |
| * Useful for various testing purposes. |
| * |
| * Copyright (C) 2002 Joachim Wuttke <Joachim.Wuttke@icn.siemens.de> |
| * Copyright (C) 2002 Frank Mori Hess <fmhess@users.sourceforge.net> |
| * |
| * COMEDI - Linux Control and Measurement Device Interface |
| * Copyright (C) 2000 David A. Schleef <ds@schleef.org> |
| */ |
| |
| /* |
| * Driver: comedi_test |
| * Description: generates fake waveforms |
| * Author: Joachim Wuttke <Joachim.Wuttke@icn.siemens.de>, Frank Mori Hess |
| * <fmhess@users.sourceforge.net>, ds |
| * Devices: |
| * Status: works |
| * Updated: Sat, 16 Mar 2002 17:34:48 -0800 |
| * |
| * This driver is mainly for testing purposes, but can also be used to |
| * generate sample waveforms on systems that don't have data acquisition |
| * hardware. |
| * |
| * Auto-configuration is the default mode if no parameter is supplied during |
| * module loading. Manual configuration requires COMEDI userspace tool. |
| * To disable auto-configuration mode, pass "noauto=1" parameter for module |
| * loading. Refer modinfo or MODULE_PARM_DESC description below for details. |
| * |
| * Auto-configuration options: |
| * Refer modinfo or MODULE_PARM_DESC description below for details. |
| * |
| * Manual configuration options: |
| * [0] - Amplitude in microvolts for fake waveforms (default 1 volt) |
| * [1] - Period in microseconds for fake waveforms (default 0.1 sec) |
| * |
| * Generates a sawtooth wave on channel 0, square wave on channel 1, additional |
| * waveforms could be added to other channels (currently they return flatline |
| * zero volts). |
| */ |
| |
| #include <linux/module.h> |
| #include "../comedidev.h" |
| |
| #include <asm/div64.h> |
| |
| #include <linux/timer.h> |
| #include <linux/ktime.h> |
| #include <linux/jiffies.h> |
| #include <linux/device.h> |
| #include <linux/kdev_t.h> |
| |
| #define N_CHANS 8 |
| #define DEV_NAME "comedi_testd" |
| #define CLASS_NAME "comedi_test" |
| |
| static bool config_mode; |
| static unsigned int set_amplitude; |
| static unsigned int set_period; |
| static struct class *ctcls; |
| static struct device *ctdev; |
| |
| module_param_named(noauto, config_mode, bool, 0444); |
| MODULE_PARM_DESC(noauto, "Disable auto-configuration: (1=disable [defaults to enable])"); |
| |
| module_param_named(amplitude, set_amplitude, uint, 0444); |
| MODULE_PARM_DESC(amplitude, "Set auto mode wave amplitude in microvolts: (defaults to 1 volt)"); |
| |
| module_param_named(period, set_period, uint, 0444); |
| MODULE_PARM_DESC(period, "Set auto mode wave period in microseconds: (defaults to 0.1 sec)"); |
| |
| /* Data unique to this driver */ |
| struct waveform_private { |
| struct timer_list ai_timer; /* timer for AI commands */ |
| u64 ai_convert_time; /* time of next AI conversion in usec */ |
| unsigned int wf_amplitude; /* waveform amplitude in microvolts */ |
| unsigned int wf_period; /* waveform period in microseconds */ |
| unsigned int wf_current; /* current time in waveform period */ |
| unsigned int ai_scan_period; /* AI scan period in usec */ |
| unsigned int ai_convert_period; /* AI conversion period in usec */ |
| struct timer_list ao_timer; /* timer for AO commands */ |
| struct comedi_device *dev; /* parent comedi device */ |
| u64 ao_last_scan_time; /* time of previous AO scan in usec */ |
| unsigned int ao_scan_period; /* AO scan period in usec */ |
| unsigned short ao_loopbacks[N_CHANS]; |
| }; |
| |
| /* fake analog input ranges */ |
| static const struct comedi_lrange waveform_ai_ranges = { |
| 2, { |
| BIP_RANGE(10), |
| BIP_RANGE(5) |
| } |
| }; |
| |
| static unsigned short fake_sawtooth(struct comedi_device *dev, |
| unsigned int range_index, |
| unsigned int current_time) |
| { |
| struct waveform_private *devpriv = dev->private; |
| struct comedi_subdevice *s = dev->read_subdev; |
| unsigned int offset = s->maxdata / 2; |
| u64 value; |
| const struct comedi_krange *krange = |
| &s->range_table->range[range_index]; |
| u64 binary_amplitude; |
| |
| binary_amplitude = s->maxdata; |
| binary_amplitude *= devpriv->wf_amplitude; |
| do_div(binary_amplitude, krange->max - krange->min); |
| |
| value = current_time; |
| value *= binary_amplitude * 2; |
| do_div(value, devpriv->wf_period); |
| value += offset; |
| /* get rid of sawtooth's dc offset and clamp value */ |
| if (value < binary_amplitude) { |
| value = 0; /* negative saturation */ |
| } else { |
| value -= binary_amplitude; |
| if (value > s->maxdata) |
| value = s->maxdata; /* positive saturation */ |
| } |
| |
| return value; |
| } |
| |
| static unsigned short fake_squarewave(struct comedi_device *dev, |
| unsigned int range_index, |
| unsigned int current_time) |
| { |
| struct waveform_private *devpriv = dev->private; |
| struct comedi_subdevice *s = dev->read_subdev; |
| unsigned int offset = s->maxdata / 2; |
| u64 value; |
| const struct comedi_krange *krange = |
| &s->range_table->range[range_index]; |
| |
| value = s->maxdata; |
| value *= devpriv->wf_amplitude; |
| do_div(value, krange->max - krange->min); |
| |
| /* get one of two values for square-wave and clamp */ |
| if (current_time < devpriv->wf_period / 2) { |
| if (offset < value) |
| value = 0; /* negative saturation */ |
| else |
| value = offset - value; |
| } else { |
| value += offset; |
| if (value > s->maxdata) |
| value = s->maxdata; /* positive saturation */ |
| } |
| |
| return value; |
| } |
| |
| static unsigned short fake_flatline(struct comedi_device *dev, |
| unsigned int range_index, |
| unsigned int current_time) |
| { |
| return dev->read_subdev->maxdata / 2; |
| } |
| |
| /* generates a different waveform depending on what channel is read */ |
| static unsigned short fake_waveform(struct comedi_device *dev, |
| unsigned int channel, unsigned int range, |
| unsigned int current_time) |
| { |
| enum { |
| SAWTOOTH_CHAN, |
| SQUARE_CHAN, |
| }; |
| switch (channel) { |
| case SAWTOOTH_CHAN: |
| return fake_sawtooth(dev, range, current_time); |
| case SQUARE_CHAN: |
| return fake_squarewave(dev, range, current_time); |
| default: |
| break; |
| } |
| |
| return fake_flatline(dev, range, current_time); |
| } |
| |
| /* |
| * This is the background routine used to generate arbitrary data. |
| * It should run in the background; therefore it is scheduled by |
| * a timer mechanism. |
| */ |
| static void waveform_ai_timer(struct timer_list *t) |
| { |
| struct waveform_private *devpriv = from_timer(devpriv, t, ai_timer); |
| struct comedi_device *dev = devpriv->dev; |
| struct comedi_subdevice *s = dev->read_subdev; |
| struct comedi_async *async = s->async; |
| struct comedi_cmd *cmd = &async->cmd; |
| u64 now; |
| unsigned int nsamples; |
| unsigned int time_increment; |
| |
| now = ktime_to_us(ktime_get()); |
| nsamples = comedi_nsamples_left(s, UINT_MAX); |
| |
| while (nsamples && devpriv->ai_convert_time < now) { |
| unsigned int chanspec = cmd->chanlist[async->cur_chan]; |
| unsigned short sample; |
| |
| sample = fake_waveform(dev, CR_CHAN(chanspec), |
| CR_RANGE(chanspec), devpriv->wf_current); |
| if (comedi_buf_write_samples(s, &sample, 1) == 0) |
| goto overrun; |
| time_increment = devpriv->ai_convert_period; |
| if (async->scan_progress == 0) { |
| /* done last conversion in scan, so add dead time */ |
| time_increment += devpriv->ai_scan_period - |
| devpriv->ai_convert_period * |
| cmd->scan_end_arg; |
| } |
| devpriv->wf_current += time_increment; |
| if (devpriv->wf_current >= devpriv->wf_period) |
| devpriv->wf_current %= devpriv->wf_period; |
| devpriv->ai_convert_time += time_increment; |
| nsamples--; |
| } |
| |
| if (cmd->stop_src == TRIG_COUNT && async->scans_done >= cmd->stop_arg) { |
| async->events |= COMEDI_CB_EOA; |
| } else { |
| if (devpriv->ai_convert_time > now) |
| time_increment = devpriv->ai_convert_time - now; |
| else |
| time_increment = 1; |
| mod_timer(&devpriv->ai_timer, |
| jiffies + usecs_to_jiffies(time_increment)); |
| } |
| |
| overrun: |
| comedi_handle_events(dev, s); |
| } |
| |
| static int waveform_ai_cmdtest(struct comedi_device *dev, |
| struct comedi_subdevice *s, |
| struct comedi_cmd *cmd) |
| { |
| int err = 0; |
| unsigned int arg, limit; |
| |
| /* Step 1 : check if triggers are trivially valid */ |
| |
| err |= comedi_check_trigger_src(&cmd->start_src, TRIG_NOW); |
| err |= comedi_check_trigger_src(&cmd->scan_begin_src, |
| TRIG_FOLLOW | TRIG_TIMER); |
| err |= comedi_check_trigger_src(&cmd->convert_src, |
| TRIG_NOW | TRIG_TIMER); |
| err |= comedi_check_trigger_src(&cmd->scan_end_src, TRIG_COUNT); |
| err |= comedi_check_trigger_src(&cmd->stop_src, TRIG_COUNT | TRIG_NONE); |
| |
| if (err) |
| return 1; |
| |
| /* Step 2a : make sure trigger sources are unique */ |
| |
| err |= comedi_check_trigger_is_unique(cmd->convert_src); |
| err |= comedi_check_trigger_is_unique(cmd->stop_src); |
| |
| /* Step 2b : and mutually compatible */ |
| |
| if (cmd->scan_begin_src == TRIG_FOLLOW && cmd->convert_src == TRIG_NOW) |
| err |= -EINVAL; /* scan period would be 0 */ |
| |
| if (err) |
| return 2; |
| |
| /* Step 3: check if arguments are trivially valid */ |
| |
| err |= comedi_check_trigger_arg_is(&cmd->start_arg, 0); |
| |
| if (cmd->convert_src == TRIG_NOW) { |
| err |= comedi_check_trigger_arg_is(&cmd->convert_arg, 0); |
| } else { /* cmd->convert_src == TRIG_TIMER */ |
| if (cmd->scan_begin_src == TRIG_FOLLOW) { |
| err |= comedi_check_trigger_arg_min(&cmd->convert_arg, |
| NSEC_PER_USEC); |
| } |
| } |
| |
| if (cmd->scan_begin_src == TRIG_FOLLOW) { |
| err |= comedi_check_trigger_arg_is(&cmd->scan_begin_arg, 0); |
| } else { /* cmd->scan_begin_src == TRIG_TIMER */ |
| err |= comedi_check_trigger_arg_min(&cmd->scan_begin_arg, |
| NSEC_PER_USEC); |
| } |
| |
| err |= comedi_check_trigger_arg_min(&cmd->chanlist_len, 1); |
| err |= comedi_check_trigger_arg_is(&cmd->scan_end_arg, |
| cmd->chanlist_len); |
| |
| if (cmd->stop_src == TRIG_COUNT) |
| err |= comedi_check_trigger_arg_min(&cmd->stop_arg, 1); |
| else /* cmd->stop_src == TRIG_NONE */ |
| err |= comedi_check_trigger_arg_is(&cmd->stop_arg, 0); |
| |
| if (err) |
| return 3; |
| |
| /* step 4: fix up any arguments */ |
| |
| if (cmd->convert_src == TRIG_TIMER) { |
| /* round convert_arg to nearest microsecond */ |
| arg = cmd->convert_arg; |
| arg = min(arg, |
| rounddown(UINT_MAX, (unsigned int)NSEC_PER_USEC)); |
| arg = NSEC_PER_USEC * DIV_ROUND_CLOSEST(arg, NSEC_PER_USEC); |
| if (cmd->scan_begin_arg == TRIG_TIMER) { |
| /* limit convert_arg to keep scan_begin_arg in range */ |
| limit = UINT_MAX / cmd->scan_end_arg; |
| limit = rounddown(limit, (unsigned int)NSEC_PER_SEC); |
| arg = min(arg, limit); |
| } |
| err |= comedi_check_trigger_arg_is(&cmd->convert_arg, arg); |
| } |
| |
| if (cmd->scan_begin_src == TRIG_TIMER) { |
| /* round scan_begin_arg to nearest microsecond */ |
| arg = cmd->scan_begin_arg; |
| arg = min(arg, |
| rounddown(UINT_MAX, (unsigned int)NSEC_PER_USEC)); |
| arg = NSEC_PER_USEC * DIV_ROUND_CLOSEST(arg, NSEC_PER_USEC); |
| if (cmd->convert_src == TRIG_TIMER) { |
| /* but ensure scan_begin_arg is large enough */ |
| arg = max(arg, cmd->convert_arg * cmd->scan_end_arg); |
| } |
| err |= comedi_check_trigger_arg_is(&cmd->scan_begin_arg, arg); |
| } |
| |
| if (err) |
| return 4; |
| |
| return 0; |
| } |
| |
| static int waveform_ai_cmd(struct comedi_device *dev, |
| struct comedi_subdevice *s) |
| { |
| struct waveform_private *devpriv = dev->private; |
| struct comedi_cmd *cmd = &s->async->cmd; |
| unsigned int first_convert_time; |
| u64 wf_current; |
| |
| if (cmd->flags & CMDF_PRIORITY) { |
| dev_err(dev->class_dev, |
| "commands at RT priority not supported in this driver\n"); |
| return -1; |
| } |
| |
| if (cmd->convert_src == TRIG_NOW) |
| devpriv->ai_convert_period = 0; |
| else /* cmd->convert_src == TRIG_TIMER */ |
| devpriv->ai_convert_period = cmd->convert_arg / NSEC_PER_USEC; |
| |
| if (cmd->scan_begin_src == TRIG_FOLLOW) { |
| devpriv->ai_scan_period = devpriv->ai_convert_period * |
| cmd->scan_end_arg; |
| } else { /* cmd->scan_begin_src == TRIG_TIMER */ |
| devpriv->ai_scan_period = cmd->scan_begin_arg / NSEC_PER_USEC; |
| } |
| |
| /* |
| * Simulate first conversion to occur at convert period after |
| * conversion timer starts. If scan_begin_src is TRIG_FOLLOW, assume |
| * the conversion timer starts immediately. If scan_begin_src is |
| * TRIG_TIMER, assume the conversion timer starts after the scan |
| * period. |
| */ |
| first_convert_time = devpriv->ai_convert_period; |
| if (cmd->scan_begin_src == TRIG_TIMER) |
| first_convert_time += devpriv->ai_scan_period; |
| devpriv->ai_convert_time = ktime_to_us(ktime_get()) + |
| first_convert_time; |
| |
| /* Determine time within waveform period at time of conversion. */ |
| wf_current = devpriv->ai_convert_time; |
| devpriv->wf_current = do_div(wf_current, devpriv->wf_period); |
| |
| /* |
| * Schedule timer to expire just after first conversion time. |
| * Seem to need an extra jiffy here, otherwise timer expires slightly |
| * early! |
| */ |
| devpriv->ai_timer.expires = |
| jiffies + usecs_to_jiffies(devpriv->ai_convert_period) + 1; |
| add_timer(&devpriv->ai_timer); |
| return 0; |
| } |
| |
| static int waveform_ai_cancel(struct comedi_device *dev, |
| struct comedi_subdevice *s) |
| { |
| struct waveform_private *devpriv = dev->private; |
| |
| if (in_softirq()) { |
| /* Assume we were called from the timer routine itself. */ |
| del_timer(&devpriv->ai_timer); |
| } else { |
| del_timer_sync(&devpriv->ai_timer); |
| } |
| return 0; |
| } |
| |
| static int waveform_ai_insn_read(struct comedi_device *dev, |
| struct comedi_subdevice *s, |
| struct comedi_insn *insn, unsigned int *data) |
| { |
| struct waveform_private *devpriv = dev->private; |
| int i, chan = CR_CHAN(insn->chanspec); |
| |
| for (i = 0; i < insn->n; i++) |
| data[i] = devpriv->ao_loopbacks[chan]; |
| |
| return insn->n; |
| } |
| |
| /* |
| * This is the background routine to handle AO commands, scheduled by |
| * a timer mechanism. |
| */ |
| static void waveform_ao_timer(struct timer_list *t) |
| { |
| struct waveform_private *devpriv = from_timer(devpriv, t, ao_timer); |
| struct comedi_device *dev = devpriv->dev; |
| struct comedi_subdevice *s = dev->write_subdev; |
| struct comedi_async *async = s->async; |
| struct comedi_cmd *cmd = &async->cmd; |
| u64 now; |
| u64 scans_since; |
| unsigned int scans_avail = 0; |
| |
| /* determine number of scan periods since last time */ |
| now = ktime_to_us(ktime_get()); |
| scans_since = now - devpriv->ao_last_scan_time; |
| do_div(scans_since, devpriv->ao_scan_period); |
| if (scans_since) { |
| unsigned int i; |
| |
| /* determine scans in buffer, limit to scans to do this time */ |
| scans_avail = comedi_nscans_left(s, 0); |
| if (scans_avail > scans_since) |
| scans_avail = scans_since; |
| if (scans_avail) { |
| /* skip all but the last scan to save processing time */ |
| if (scans_avail > 1) { |
| unsigned int skip_bytes, nbytes; |
| |
| skip_bytes = |
| comedi_samples_to_bytes(s, cmd->scan_end_arg * |
| (scans_avail - 1)); |
| nbytes = comedi_buf_read_alloc(s, skip_bytes); |
| comedi_buf_read_free(s, nbytes); |
| comedi_inc_scan_progress(s, nbytes); |
| if (nbytes < skip_bytes) { |
| /* unexpected underrun! (cancelled?) */ |
| async->events |= COMEDI_CB_OVERFLOW; |
| goto underrun; |
| } |
| } |
| /* output the last scan */ |
| for (i = 0; i < cmd->scan_end_arg; i++) { |
| unsigned int chan = CR_CHAN(cmd->chanlist[i]); |
| unsigned short *pd; |
| |
| pd = &devpriv->ao_loopbacks[chan]; |
| |
| if (!comedi_buf_read_samples(s, pd, 1)) { |
| /* unexpected underrun! (cancelled?) */ |
| async->events |= COMEDI_CB_OVERFLOW; |
| goto underrun; |
| } |
| } |
| /* advance time of last scan */ |
| devpriv->ao_last_scan_time += |
| (u64)scans_avail * devpriv->ao_scan_period; |
| } |
| } |
| if (cmd->stop_src == TRIG_COUNT && async->scans_done >= cmd->stop_arg) { |
| async->events |= COMEDI_CB_EOA; |
| } else if (scans_avail < scans_since) { |
| async->events |= COMEDI_CB_OVERFLOW; |
| } else { |
| unsigned int time_inc = devpriv->ao_last_scan_time + |
| devpriv->ao_scan_period - now; |
| |
| mod_timer(&devpriv->ao_timer, |
| jiffies + usecs_to_jiffies(time_inc)); |
| } |
| |
| underrun: |
| comedi_handle_events(dev, s); |
| } |
| |
| static int waveform_ao_inttrig_start(struct comedi_device *dev, |
| struct comedi_subdevice *s, |
| unsigned int trig_num) |
| { |
| struct waveform_private *devpriv = dev->private; |
| struct comedi_async *async = s->async; |
| struct comedi_cmd *cmd = &async->cmd; |
| |
| if (trig_num != cmd->start_arg) |
| return -EINVAL; |
| |
| async->inttrig = NULL; |
| |
| devpriv->ao_last_scan_time = ktime_to_us(ktime_get()); |
| devpriv->ao_timer.expires = |
| jiffies + usecs_to_jiffies(devpriv->ao_scan_period); |
| add_timer(&devpriv->ao_timer); |
| |
| return 1; |
| } |
| |
| static int waveform_ao_cmdtest(struct comedi_device *dev, |
| struct comedi_subdevice *s, |
| struct comedi_cmd *cmd) |
| { |
| int err = 0; |
| unsigned int arg; |
| |
| /* Step 1 : check if triggers are trivially valid */ |
| |
| err |= comedi_check_trigger_src(&cmd->start_src, TRIG_INT); |
| err |= comedi_check_trigger_src(&cmd->scan_begin_src, TRIG_TIMER); |
| err |= comedi_check_trigger_src(&cmd->convert_src, TRIG_NOW); |
| err |= comedi_check_trigger_src(&cmd->scan_end_src, TRIG_COUNT); |
| err |= comedi_check_trigger_src(&cmd->stop_src, TRIG_COUNT | TRIG_NONE); |
| |
| if (err) |
| return 1; |
| |
| /* Step 2a : make sure trigger sources are unique */ |
| |
| err |= comedi_check_trigger_is_unique(cmd->stop_src); |
| |
| /* Step 2b : and mutually compatible */ |
| |
| if (err) |
| return 2; |
| |
| /* Step 3: check if arguments are trivially valid */ |
| |
| err |= comedi_check_trigger_arg_min(&cmd->scan_begin_arg, |
| NSEC_PER_USEC); |
| err |= comedi_check_trigger_arg_is(&cmd->convert_arg, 0); |
| err |= comedi_check_trigger_arg_min(&cmd->chanlist_len, 1); |
| err |= comedi_check_trigger_arg_is(&cmd->scan_end_arg, |
| cmd->chanlist_len); |
| if (cmd->stop_src == TRIG_COUNT) |
| err |= comedi_check_trigger_arg_min(&cmd->stop_arg, 1); |
| else /* cmd->stop_src == TRIG_NONE */ |
| err |= comedi_check_trigger_arg_is(&cmd->stop_arg, 0); |
| |
| if (err) |
| return 3; |
| |
| /* step 4: fix up any arguments */ |
| |
| /* round scan_begin_arg to nearest microsecond */ |
| arg = cmd->scan_begin_arg; |
| arg = min(arg, rounddown(UINT_MAX, (unsigned int)NSEC_PER_USEC)); |
| arg = NSEC_PER_USEC * DIV_ROUND_CLOSEST(arg, NSEC_PER_USEC); |
| err |= comedi_check_trigger_arg_is(&cmd->scan_begin_arg, arg); |
| |
| if (err) |
| return 4; |
| |
| return 0; |
| } |
| |
| static int waveform_ao_cmd(struct comedi_device *dev, |
| struct comedi_subdevice *s) |
| { |
| struct waveform_private *devpriv = dev->private; |
| struct comedi_cmd *cmd = &s->async->cmd; |
| |
| if (cmd->flags & CMDF_PRIORITY) { |
| dev_err(dev->class_dev, |
| "commands at RT priority not supported in this driver\n"); |
| return -1; |
| } |
| |
| devpriv->ao_scan_period = cmd->scan_begin_arg / NSEC_PER_USEC; |
| s->async->inttrig = waveform_ao_inttrig_start; |
| return 0; |
| } |
| |
| static int waveform_ao_cancel(struct comedi_device *dev, |
| struct comedi_subdevice *s) |
| { |
| struct waveform_private *devpriv = dev->private; |
| |
| s->async->inttrig = NULL; |
| if (in_softirq()) { |
| /* Assume we were called from the timer routine itself. */ |
| del_timer(&devpriv->ao_timer); |
| } else { |
| del_timer_sync(&devpriv->ao_timer); |
| } |
| return 0; |
| } |
| |
| static int waveform_ao_insn_write(struct comedi_device *dev, |
| struct comedi_subdevice *s, |
| struct comedi_insn *insn, unsigned int *data) |
| { |
| struct waveform_private *devpriv = dev->private; |
| int i, chan = CR_CHAN(insn->chanspec); |
| |
| for (i = 0; i < insn->n; i++) |
| devpriv->ao_loopbacks[chan] = data[i]; |
| |
| return insn->n; |
| } |
| |
| static int waveform_ai_insn_config(struct comedi_device *dev, |
| struct comedi_subdevice *s, |
| struct comedi_insn *insn, |
| unsigned int *data) |
| { |
| if (data[0] == INSN_CONFIG_GET_CMD_TIMING_CONSTRAINTS) { |
| /* |
| * input: data[1], data[2] : scan_begin_src, convert_src |
| * output: data[1], data[2] : scan_begin_min, convert_min |
| */ |
| if (data[1] == TRIG_FOLLOW) { |
| /* exactly TRIG_FOLLOW case */ |
| data[1] = 0; |
| data[2] = NSEC_PER_USEC; |
| } else { |
| data[1] = NSEC_PER_USEC; |
| if (data[2] & TRIG_TIMER) |
| data[2] = NSEC_PER_USEC; |
| else |
| data[2] = 0; |
| } |
| return 0; |
| } |
| |
| return -EINVAL; |
| } |
| |
| static int waveform_ao_insn_config(struct comedi_device *dev, |
| struct comedi_subdevice *s, |
| struct comedi_insn *insn, |
| unsigned int *data) |
| { |
| if (data[0] == INSN_CONFIG_GET_CMD_TIMING_CONSTRAINTS) { |
| /* we don't care about actual channels */ |
| data[1] = NSEC_PER_USEC; /* scan_begin_min */ |
| data[2] = 0; /* convert_min */ |
| return 0; |
| } |
| |
| return -EINVAL; |
| } |
| |
| static int waveform_common_attach(struct comedi_device *dev, |
| int amplitude, int period) |
| { |
| struct waveform_private *devpriv; |
| struct comedi_subdevice *s; |
| int i; |
| int ret; |
| |
| devpriv = comedi_alloc_devpriv(dev, sizeof(*devpriv)); |
| if (!devpriv) |
| return -ENOMEM; |
| |
| devpriv->wf_amplitude = amplitude; |
| devpriv->wf_period = period; |
| |
| ret = comedi_alloc_subdevices(dev, 2); |
| if (ret) |
| return ret; |
| |
| s = &dev->subdevices[0]; |
| dev->read_subdev = s; |
| /* analog input subdevice */ |
| s->type = COMEDI_SUBD_AI; |
| s->subdev_flags = SDF_READABLE | SDF_GROUND | SDF_CMD_READ; |
| s->n_chan = N_CHANS; |
| s->maxdata = 0xffff; |
| s->range_table = &waveform_ai_ranges; |
| s->len_chanlist = s->n_chan * 2; |
| s->insn_read = waveform_ai_insn_read; |
| s->do_cmd = waveform_ai_cmd; |
| s->do_cmdtest = waveform_ai_cmdtest; |
| s->cancel = waveform_ai_cancel; |
| s->insn_config = waveform_ai_insn_config; |
| |
| s = &dev->subdevices[1]; |
| dev->write_subdev = s; |
| /* analog output subdevice (loopback) */ |
| s->type = COMEDI_SUBD_AO; |
| s->subdev_flags = SDF_WRITABLE | SDF_GROUND | SDF_CMD_WRITE; |
| s->n_chan = N_CHANS; |
| s->maxdata = 0xffff; |
| s->range_table = &waveform_ai_ranges; |
| s->len_chanlist = s->n_chan; |
| s->insn_write = waveform_ao_insn_write; |
| s->insn_read = waveform_ai_insn_read; /* do same as AI insn_read */ |
| s->do_cmd = waveform_ao_cmd; |
| s->do_cmdtest = waveform_ao_cmdtest; |
| s->cancel = waveform_ao_cancel; |
| s->insn_config = waveform_ao_insn_config; |
| |
| /* Our default loopback value is just a 0V flatline */ |
| for (i = 0; i < s->n_chan; i++) |
| devpriv->ao_loopbacks[i] = s->maxdata / 2; |
| |
| devpriv->dev = dev; |
| timer_setup(&devpriv->ai_timer, waveform_ai_timer, 0); |
| timer_setup(&devpriv->ao_timer, waveform_ao_timer, 0); |
| |
| dev_info(dev->class_dev, |
| "%s: %u microvolt, %u microsecond waveform attached\n", |
| dev->board_name, |
| devpriv->wf_amplitude, devpriv->wf_period); |
| |
| return 0; |
| } |
| |
| static int waveform_attach(struct comedi_device *dev, |
| struct comedi_devconfig *it) |
| { |
| int amplitude = it->options[0]; |
| int period = it->options[1]; |
| |
| /* set default amplitude and period */ |
| if (amplitude <= 0) |
| amplitude = 1000000; /* 1 volt */ |
| if (period <= 0) |
| period = 100000; /* 0.1 sec */ |
| |
| return waveform_common_attach(dev, amplitude, period); |
| } |
| |
| static int waveform_auto_attach(struct comedi_device *dev, |
| unsigned long context_unused) |
| { |
| int amplitude = set_amplitude; |
| int period = set_period; |
| |
| /* set default amplitude and period */ |
| if (!amplitude) |
| amplitude = 1000000; /* 1 volt */ |
| if (!period) |
| period = 100000; /* 0.1 sec */ |
| |
| return waveform_common_attach(dev, amplitude, period); |
| } |
| |
| static void waveform_detach(struct comedi_device *dev) |
| { |
| struct waveform_private *devpriv = dev->private; |
| |
| if (devpriv) { |
| del_timer_sync(&devpriv->ai_timer); |
| del_timer_sync(&devpriv->ao_timer); |
| } |
| } |
| |
| static struct comedi_driver waveform_driver = { |
| .driver_name = "comedi_test", |
| .module = THIS_MODULE, |
| .attach = waveform_attach, |
| .auto_attach = waveform_auto_attach, |
| .detach = waveform_detach, |
| }; |
| |
| /* |
| * For auto-configuration, a device is created to stand in for a |
| * real hardware device. |
| */ |
| static int __init comedi_test_init(void) |
| { |
| int ret; |
| |
| ret = comedi_driver_register(&waveform_driver); |
| if (ret) { |
| pr_err("comedi_test: unable to register driver\n"); |
| return ret; |
| } |
| |
| if (!config_mode) { |
| ctcls = class_create(THIS_MODULE, CLASS_NAME); |
| if (IS_ERR(ctcls)) { |
| pr_warn("comedi_test: unable to create class\n"); |
| goto clean3; |
| } |
| |
| ctdev = device_create(ctcls, NULL, MKDEV(0, 0), NULL, DEV_NAME); |
| if (IS_ERR(ctdev)) { |
| pr_warn("comedi_test: unable to create device\n"); |
| goto clean2; |
| } |
| |
| ret = comedi_auto_config(ctdev, &waveform_driver, 0); |
| if (ret) { |
| pr_warn("comedi_test: unable to auto-configure device\n"); |
| goto clean; |
| } |
| } |
| |
| return 0; |
| |
| clean: |
| device_destroy(ctcls, MKDEV(0, 0)); |
| clean2: |
| class_destroy(ctcls); |
| ctdev = NULL; |
| clean3: |
| ctcls = NULL; |
| |
| return 0; |
| } |
| module_init(comedi_test_init); |
| |
| static void __exit comedi_test_exit(void) |
| { |
| if (ctdev) |
| comedi_auto_unconfig(ctdev); |
| |
| if (ctcls) { |
| device_destroy(ctcls, MKDEV(0, 0)); |
| class_destroy(ctcls); |
| } |
| |
| comedi_driver_unregister(&waveform_driver); |
| } |
| module_exit(comedi_test_exit); |
| |
| MODULE_AUTHOR("Comedi https://www.comedi.org"); |
| MODULE_DESCRIPTION("Comedi low-level driver"); |
| MODULE_LICENSE("GPL"); |