What:		/sys/class/fieldbus_dev/fieldbus_devX/card_name
KernelVersion:	5.1 (staging)
Contact:	Sven Van Asbroeck <TheSven73@gmail.com>
Description:
		Human-readable name of the Fieldbus Device.

What:		/sys/class/fieldbus_dev/fieldbus_devX/fieldbus_type
KernelVersion:	5.1 (staging)
Contact:	Sven Van Asbroeck <TheSven73@gmail.com>
Description:
		The type of fieldbus implemented by this device.
		Possible values:
			'unknown'
			'profinet'

What:		/sys/class/fieldbus_dev/fieldbus_devX/fieldbus_id
KernelVersion:	5.1 (staging)
Contact:	Sven Van Asbroeck <TheSven73@gmail.com>
Description:
		The unique fieldbus id associated with this device.
		The exact format of this id is fieldbus type dependent, e.g.
		a mac address for profinet.

What:		/sys/class/fieldbus_dev/fieldbus_devX/read_area_size
KernelVersion:	5.1 (staging)
Contact:	Sven Van Asbroeck <TheSven73@gmail.com>
Description:
		The size, in bytes, of the Process Memory read area.
		Note: this area is accessible by reading from the associated
			character device (/dev/fieldbus_devX).

What:		/sys/class/fieldbus_dev/fieldbus_devX/write_area_size
KernelVersion:	5.1 (staging)
Contact:	Sven Van Asbroeck <TheSven73@gmail.com>
Description:
		The size, in bytes, of the Process Memory write area.
		Note: this area is accessible by writing to the associated
			character device (/dev/fieldbus_devX)

What:		/sys/class/fieldbus_dev/fieldbus_devX/online
KernelVersion:	5.1 (staging)
Contact:	Sven Van Asbroeck <TheSven73@gmail.com>
Description:
		Whether the fieldbus is online or offline.
		Possible values:
			'1' meaning 'online'
			'0' meaning 'offline'
		Note: an uevent is generated when this property changes.

What:		/sys/class/fieldbus_dev/fieldbus_devX/enabled
KernelVersion:	5.1 (staging)
Contact:	Sven Van Asbroeck <TheSven73@gmail.com>
Description:
		Whether the device is enabled (power on) or
			disabled (power off).
		Possible values:
			'1' meaning enabled
			'0' meaning disabled
		Normally a r/o property, but optionally r/w:
		Writing '1' enables the device (power on) with default
			settings.
		Writing '0' disables the card (power off).