blob: aff69661c8e627353c567449ade429f324e6671a [file] [log] [blame]
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef LYNXDRV_H_
#define LYNXDRV_H_
#define FB_ACCEL_SMI 0xab
#define MHZ(x) ((x) * 1000000)
#define DEFAULT_SM750_CHIP_CLOCK 290
#define DEFAULT_SM750LE_CHIP_CLOCK 333
#ifndef SM750LE_REVISION_ID
#define SM750LE_REVISION_ID ((unsigned char)0xfe)
#endif
enum sm750_pnltype {
sm750_24TFT = 0, /* 24bit tft */
sm750_dualTFT = 2, /* dual 18 bit tft */
sm750_doubleTFT = 1, /* 36 bit double pixel tft */
};
/* vga channel is not concerned */
enum sm750_dataflow {
sm750_simul_pri, /* primary => all head */
sm750_simul_sec, /* secondary => all head */
sm750_dual_normal, /* primary => panel head and secondary => crt */
sm750_dual_swap, /* primary => crt head and secondary => panel */
};
enum sm750_channel {
sm750_primary = 0,
/* enum value equal to the register filed data */
sm750_secondary = 1,
};
enum sm750_path {
sm750_panel = 1,
sm750_crt = 2,
sm750_pnc = 3, /* panel and crt */
};
struct init_status {
ushort powerMode;
/* below three clocks are in unit of MHZ*/
ushort chip_clk;
ushort mem_clk;
ushort master_clk;
ushort setAllEngOff;
ushort resetMemory;
};
struct lynx_accel {
/* base virtual address of DPR registers */
volatile unsigned char __iomem *dprBase;
/* base virtual address of de data port */
volatile unsigned char __iomem *dpPortBase;
/* function pointers */
void (*de_init)(struct lynx_accel *accel);
int (*de_wait)(void);/* see if hardware ready to work */
int (*de_fillrect)(struct lynx_accel *accel,
u32 base, u32 pitch, u32 bpp,
u32 x, u32 y, u32 width, u32 height,
u32 color, u32 rop);
int (*de_copyarea)(struct lynx_accel *accel,
u32 s_base, u32 s_pitch,
u32 sx, u32 sy,
u32 d_base, u32 d_pitch,
u32 bpp, u32 dx, u32 dy,
u32 width, u32 height,
u32 rop2);
int (*de_imageblit)(struct lynx_accel *accel, const char *p_srcbuf,
u32 src_delta, u32 start_bit, u32 d_base, u32 d_pitch,
u32 byte_per_pixel, u32 dx, u32 dy, u32 width,
u32 height, u32 f_color, u32 b_color, u32 rop2);
};
struct sm750_dev {
/* common members */
u16 devid;
u8 revid;
struct pci_dev *pdev;
struct fb_info *fbinfo[2];
struct lynx_accel accel;
int accel_off;
int fb_count;
int mtrr_off;
struct{
int vram;
} mtrr;
/* all smi graphic adaptor got below attributes */
unsigned long vidmem_start;
unsigned long vidreg_start;
__u32 vidmem_size;
__u32 vidreg_size;
void __iomem *pvReg;
unsigned char __iomem *pvMem;
/* locks*/
spinlock_t slock;
struct init_status initParm;
enum sm750_pnltype pnltype;
enum sm750_dataflow dataflow;
int nocrt;
/*
* 0: no hardware cursor
* 1: primary crtc hw cursor enabled,
* 2: secondary crtc hw cursor enabled
* 3: both ctrc hw cursor enabled
*/
int hwCursor;
};
struct lynx_cursor {
/* cursor width ,height and size */
int w;
int h;
int size;
/* hardware limitation */
int max_w;
int max_h;
/* base virtual address and offset of cursor image */
char __iomem *vstart;
int offset;
/* mmio addr of hw cursor */
volatile char __iomem *mmio;
};
struct lynxfb_crtc {
unsigned char __iomem *v_cursor; /* virtual address of cursor */
unsigned char __iomem *v_screen; /* virtual address of on_screen */
int o_cursor; /* cursor address offset in vidmem */
int o_screen; /* onscreen address offset in vidmem */
int channel;/* which channel this crtc stands for*/
resource_size_t vidmem_size;/* this view's video memory max size */
/* below attributes belong to info->fix, their value depends on specific adaptor*/
u16 line_pad;/* padding information:0,1,2,4,8,16,... */
u16 xpanstep;
u16 ypanstep;
u16 ywrapstep;
void *priv;
/* cursor information */
struct lynx_cursor cursor;
};
struct lynxfb_output {
int dpms;
int paths;
/*
* which paths(s) this output stands for,for sm750:
* paths=1:means output for panel paths
* paths=2:means output for crt paths
* paths=3:means output for both panel and crt paths
*/
int *channel;
/*
* which channel these outputs linked with,for sm750:
* *channel=0 means primary channel
* *channel=1 means secondary channel
* output->channel ==> &crtc->channel
*/
void *priv;
int (*proc_setBLANK)(struct lynxfb_output *output, int blank);
};
struct lynxfb_par {
/* either 0 or 1 for dual head adaptor,0 is the older one registered */
int index;
unsigned int pseudo_palette[256];
struct lynxfb_crtc crtc;
struct lynxfb_output output;
struct fb_info *info;
struct sm750_dev *dev;
};
static inline unsigned long ps_to_hz(unsigned int psvalue)
{
unsigned long long numerator = 1000 * 1000 * 1000 * 1000ULL;
/* 10^12 / picosecond period gives frequency in Hz */
do_div(numerator, psvalue);
return (unsigned long)numerator;
}
int hw_sm750_map(struct sm750_dev *sm750_dev, struct pci_dev *pdev);
int hw_sm750_inithw(struct sm750_dev *sm750_dev, struct pci_dev *pdev);
void hw_sm750_initAccel(struct sm750_dev *sm750_dev);
int hw_sm750_deWait(void);
int hw_sm750le_deWait(void);
int hw_sm750_output_setMode(struct lynxfb_output *output,
struct fb_var_screeninfo *var,
struct fb_fix_screeninfo *fix);
int hw_sm750_crtc_checkMode(struct lynxfb_crtc *crtc,
struct fb_var_screeninfo *var);
int hw_sm750_crtc_setMode(struct lynxfb_crtc *crtc,
struct fb_var_screeninfo *var,
struct fb_fix_screeninfo *fix);
int hw_sm750_setColReg(struct lynxfb_crtc *crtc, ushort index,
ushort red, ushort green, ushort blue);
int hw_sm750_setBLANK(struct lynxfb_output *output, int blank);
int hw_sm750le_setBLANK(struct lynxfb_output *output, int blank);
int hw_sm750_pan_display(struct lynxfb_crtc *crtc,
const struct fb_var_screeninfo *var,
const struct fb_info *info);
#endif