blob: c303f7a114e916c6c5a36c7004bace8397b1d28c [file] [log] [blame]
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef _LINUX_TRACE_RECURSION_H
#define _LINUX_TRACE_RECURSION_H
#include <linux/interrupt.h>
#include <linux/sched.h>
#ifdef CONFIG_TRACING
/* Only current can touch trace_recursion */
/*
* For function tracing recursion:
* The order of these bits are important.
*
* When function tracing occurs, the following steps are made:
* If arch does not support a ftrace feature:
* call internal function (uses INTERNAL bits) which calls...
* The function callback, which can use the FTRACE bits to
* check for recursion.
*/
enum {
/* Function recursion bits */
TRACE_FTRACE_BIT,
TRACE_FTRACE_NMI_BIT,
TRACE_FTRACE_IRQ_BIT,
TRACE_FTRACE_SIRQ_BIT,
TRACE_FTRACE_TRANSITION_BIT,
/* Internal use recursion bits */
TRACE_INTERNAL_BIT,
TRACE_INTERNAL_NMI_BIT,
TRACE_INTERNAL_IRQ_BIT,
TRACE_INTERNAL_SIRQ_BIT,
TRACE_INTERNAL_TRANSITION_BIT,
TRACE_BRANCH_BIT,
/*
* Abuse of the trace_recursion.
* As we need a way to maintain state if we are tracing the function
* graph in irq because we want to trace a particular function that
* was called in irq context but we have irq tracing off. Since this
* can only be modified by current, we can reuse trace_recursion.
*/
TRACE_IRQ_BIT,
/* Set if the function is in the set_graph_function file */
TRACE_GRAPH_BIT,
/*
* In the very unlikely case that an interrupt came in
* at a start of graph tracing, and we want to trace
* the function in that interrupt, the depth can be greater
* than zero, because of the preempted start of a previous
* trace. In an even more unlikely case, depth could be 2
* if a softirq interrupted the start of graph tracing,
* followed by an interrupt preempting a start of graph
* tracing in the softirq, and depth can even be 3
* if an NMI came in at the start of an interrupt function
* that preempted a softirq start of a function that
* preempted normal context!!!! Luckily, it can't be
* greater than 3, so the next two bits are a mask
* of what the depth is when we set TRACE_GRAPH_BIT
*/
TRACE_GRAPH_DEPTH_START_BIT,
TRACE_GRAPH_DEPTH_END_BIT,
/*
* To implement set_graph_notrace, if this bit is set, we ignore
* function graph tracing of called functions, until the return
* function is called to clear it.
*/
TRACE_GRAPH_NOTRACE_BIT,
/* Used to prevent recursion recording from recursing. */
TRACE_RECORD_RECURSION_BIT,
};
#define trace_recursion_set(bit) do { (current)->trace_recursion |= (1<<(bit)); } while (0)
#define trace_recursion_clear(bit) do { (current)->trace_recursion &= ~(1<<(bit)); } while (0)
#define trace_recursion_test(bit) ((current)->trace_recursion & (1<<(bit)))
#define trace_recursion_depth() \
(((current)->trace_recursion >> TRACE_GRAPH_DEPTH_START_BIT) & 3)
#define trace_recursion_set_depth(depth) \
do { \
current->trace_recursion &= \
~(3 << TRACE_GRAPH_DEPTH_START_BIT); \
current->trace_recursion |= \
((depth) & 3) << TRACE_GRAPH_DEPTH_START_BIT; \
} while (0)
#define TRACE_CONTEXT_BITS 4
#define TRACE_FTRACE_START TRACE_FTRACE_BIT
#define TRACE_LIST_START TRACE_INTERNAL_BIT
#define TRACE_CONTEXT_MASK ((1 << (TRACE_LIST_START + TRACE_CONTEXT_BITS)) - 1)
/*
* Used for setting context
* NMI = 0
* IRQ = 1
* SOFTIRQ = 2
* NORMAL = 3
*/
enum {
TRACE_CTX_NMI,
TRACE_CTX_IRQ,
TRACE_CTX_SOFTIRQ,
TRACE_CTX_NORMAL,
TRACE_CTX_TRANSITION,
};
static __always_inline int trace_get_context_bit(void)
{
unsigned char bit = interrupt_context_level();
return TRACE_CTX_NORMAL - bit;
}
#ifdef CONFIG_FTRACE_RECORD_RECURSION
extern void ftrace_record_recursion(unsigned long ip, unsigned long parent_ip);
# define do_ftrace_record_recursion(ip, pip) \
do { \
if (!trace_recursion_test(TRACE_RECORD_RECURSION_BIT)) { \
trace_recursion_set(TRACE_RECORD_RECURSION_BIT); \
ftrace_record_recursion(ip, pip); \
trace_recursion_clear(TRACE_RECORD_RECURSION_BIT); \
} \
} while (0)
#else
# define do_ftrace_record_recursion(ip, pip) do { } while (0)
#endif
/*
* Preemption is promised to be disabled when return bit >= 0.
*/
static __always_inline int trace_test_and_set_recursion(unsigned long ip, unsigned long pip,
int start)
{
unsigned int val = READ_ONCE(current->trace_recursion);
int bit;
bit = trace_get_context_bit() + start;
if (unlikely(val & (1 << bit))) {
/*
* If an interrupt occurs during a trace, and another trace
* happens in that interrupt but before the preempt_count is
* updated to reflect the new interrupt context, then this
* will think a recursion occurred, and the event will be dropped.
* Let a single instance happen via the TRANSITION_BIT to
* not drop those events.
*/
bit = TRACE_CTX_TRANSITION + start;
if (val & (1 << bit)) {
do_ftrace_record_recursion(ip, pip);
return -1;
}
}
val |= 1 << bit;
current->trace_recursion = val;
barrier();
preempt_disable_notrace();
return bit;
}
/*
* Preemption will be enabled (if it was previously enabled).
*/
static __always_inline void trace_clear_recursion(int bit)
{
preempt_enable_notrace();
barrier();
trace_recursion_clear(bit);
}
/**
* ftrace_test_recursion_trylock - tests for recursion in same context
*
* Use this for ftrace callbacks. This will detect if the function
* tracing recursed in the same context (normal vs interrupt),
*
* Returns: -1 if a recursion happened.
* >= 0 if no recursion.
*/
static __always_inline int ftrace_test_recursion_trylock(unsigned long ip,
unsigned long parent_ip)
{
return trace_test_and_set_recursion(ip, parent_ip, TRACE_FTRACE_START);
}
/**
* ftrace_test_recursion_unlock - called when function callback is complete
* @bit: The return of a successful ftrace_test_recursion_trylock()
*
* This is used at the end of a ftrace callback.
*/
static __always_inline void ftrace_test_recursion_unlock(int bit)
{
trace_clear_recursion(bit);
}
#endif /* CONFIG_TRACING */
#endif /* _LINUX_TRACE_RECURSION_H */