ethernet/intel: Convert fallthrough code comments
Convert all the remaining 'fall through" code comments to the newer
'fallthrough;' keyword.
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
index f999cca..ae0a633 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -338,12 +338,12 @@ static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw)
*/
msleep(50);
- /* fall-through */
+ fallthrough;
case e1000_pch2lan:
if (e1000_phy_is_accessible_pchlan(hw))
break;
- /* fall-through */
+ fallthrough;
case e1000_pchlan:
if ((hw->mac.type == e1000_pchlan) &&
(fwsm & E1000_ICH_FWSM_FW_VALID))
@@ -459,7 +459,7 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw)
return ret_val;
if ((phy->id != 0) && (phy->id != PHY_REVISION_MASK))
break;
- /* fall-through */
+ fallthrough;
case e1000_pch2lan:
case e1000_pch_lpt:
case e1000_pch_spt:
@@ -704,7 +704,7 @@ static s32 e1000_init_mac_params_ich8lan(struct e1000_hw *hw)
case e1000_pch2lan:
mac->rar_entry_count = E1000_PCH2_RAR_ENTRIES;
mac->ops.rar_set = e1000_rar_set_pch2lan;
- /* fall-through */
+ fallthrough;
case e1000_pch_lpt:
case e1000_pch_spt:
case e1000_pch_cnp:
@@ -1559,7 +1559,7 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
ret_val = e1000_k1_workaround_lv(hw);
if (ret_val)
return ret_val;
- /* fall-thru */
+ fallthrough;
case e1000_pchlan:
if (hw->phy.type == e1000_phy_82578) {
ret_val = e1000_link_stall_workaround_hv(hw);
@@ -2096,7 +2096,7 @@ static s32 e1000_sw_lcd_config_ich8lan(struct e1000_hw *hw)
sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG;
break;
}
- /* Fall-thru */
+ fallthrough;
case e1000_pchlan:
case e1000_pch2lan:
case e1000_pch_lpt:
@@ -3189,7 +3189,7 @@ static s32 e1000_valid_nvm_bank_detect_ich8lan(struct e1000_hw *hw, u32 *bank)
return 0;
}
e_dbg("Unable to determine valid NVM bank via EEC - reading flash signature\n");
- /* fall-thru */
+ fallthrough;
default:
/* set bank to 0 in case flash read fails */
*bank = 0;
