[SCSI] Disable WRITE SAME for RAID and virtual host adapter drivers
Some host adapters do not pass commands through to the target disk
directly. Instead they provide an emulated target which may or may not
accurately report its capabilities. In some cases the physical device
characteristics are reported even when the host adapter is processing
commands on the device's behalf. This can lead to adapter firmware hangs
or excessive I/O errors.
This patch disables WRITE SAME for devices connected to host adapters
that provide an emulated target. Driver writers can disable WRITE SAME
by setting the no_write_same flag in the host adapter template.
[jejb: fix up rejections due to eh_deadline patch]
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Cc: stable@kernel.org
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index db6dfcf..ab58556 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -3625,6 +3625,7 @@
shost->max_lun = 1;
shost->max_channel = 1;
shost->max_cmd_len = 16;
+ shost->no_write_same = 1;
/* Schedule policy is determined by ->qc_defer()
* callback and it needs to see every deferred qc.
diff --git a/drivers/firewire/sbp2.c b/drivers/firewire/sbp2.c
index 281029d..b0bb056 100644
--- a/drivers/firewire/sbp2.c
+++ b/drivers/firewire/sbp2.c
@@ -1623,6 +1623,7 @@
.cmd_per_lun = 1,
.can_queue = 1,
.sdev_attrs = sbp2_scsi_sysfs_attrs,
+ .no_write_same = 1,
};
MODULE_AUTHOR("Kristian Hoegsberg <krh@bitplanet.net>");
diff --git a/drivers/scsi/3w-9xxx.c b/drivers/scsi/3w-9xxx.c
index 5e1e12c..0a73253 100644
--- a/drivers/scsi/3w-9xxx.c
+++ b/drivers/scsi/3w-9xxx.c
@@ -2025,7 +2025,8 @@
.cmd_per_lun = TW_MAX_CMDS_PER_LUN,
.use_clustering = ENABLE_CLUSTERING,
.shost_attrs = twa_host_attrs,
- .emulated = 1
+ .emulated = 1,
+ .no_write_same = 1,
};
/* This function will probe and initialize a card */
diff --git a/drivers/scsi/3w-sas.c b/drivers/scsi/3w-sas.c
index c845bdb..4de3460 100644
--- a/drivers/scsi/3w-sas.c
+++ b/drivers/scsi/3w-sas.c
@@ -1600,7 +1600,8 @@
.cmd_per_lun = TW_MAX_CMDS_PER_LUN,
.use_clustering = ENABLE_CLUSTERING,
.shost_attrs = twl_host_attrs,
- .emulated = 1
+ .emulated = 1,
+ .no_write_same = 1,
};
/* This function will probe and initialize a card */
diff --git a/drivers/scsi/3w-xxxx.c b/drivers/scsi/3w-xxxx.c
index b9276d1..752624e 100644
--- a/drivers/scsi/3w-xxxx.c
+++ b/drivers/scsi/3w-xxxx.c
@@ -2279,7 +2279,8 @@
.cmd_per_lun = TW_MAX_CMDS_PER_LUN,
.use_clustering = ENABLE_CLUSTERING,
.shost_attrs = tw_host_attrs,
- .emulated = 1
+ .emulated = 1,
+ .no_write_same = 1,
};
/* This function will probe and initialize a card */
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index f0d432c1..4921ed19 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -1081,6 +1081,7 @@
#endif
.use_clustering = ENABLE_CLUSTERING,
.emulated = 1,
+ .no_write_same = 1,
};
static void __aac_shutdown(struct aac_dev * aac)
diff --git a/drivers/scsi/arcmsr/arcmsr_hba.c b/drivers/scsi/arcmsr/arcmsr_hba.c
index 97fd450..4f6a30b 100644
--- a/drivers/scsi/arcmsr/arcmsr_hba.c
+++ b/drivers/scsi/arcmsr/arcmsr_hba.c
@@ -137,6 +137,7 @@
.cmd_per_lun = ARCMSR_MAX_CMD_PERLUN,
.use_clustering = ENABLE_CLUSTERING,
.shost_attrs = arcmsr_host_attrs,
+ .no_write_same = 1,
};
static struct pci_device_id arcmsr_device_id_table[] = {
{PCI_DEVICE(PCI_VENDOR_ID_ARECA, PCI_DEVICE_ID_ARECA_1110)},
diff --git a/drivers/scsi/gdth.c b/drivers/scsi/gdth.c
index ee4fa40..ce5ef0190 100644
--- a/drivers/scsi/gdth.c
+++ b/drivers/scsi/gdth.c
@@ -4684,6 +4684,7 @@
.cmd_per_lun = GDTH_MAXC_P_L,
.unchecked_isa_dma = 1,
.use_clustering = ENABLE_CLUSTERING,
+ .no_write_same = 1,
};
#ifdef CONFIG_ISA
diff --git a/drivers/scsi/hosts.c b/drivers/scsi/hosts.c
index f334859..f2c5005 100644
--- a/drivers/scsi/hosts.c
+++ b/drivers/scsi/hosts.c
@@ -395,6 +395,7 @@
shost->use_clustering = sht->use_clustering;
shost->ordered_tag = sht->ordered_tag;
shost->eh_deadline = shost_eh_deadline * HZ;
+ shost->no_write_same = sht->no_write_same;
if (sht->supported_mode == MODE_UNKNOWN)
/* means we didn't set it ... default to INITIATOR */
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 22f6432..2336bef 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -561,6 +561,7 @@
.sdev_attrs = hpsa_sdev_attrs,
.shost_attrs = hpsa_shost_attrs,
.max_sectors = 8192,
+ .no_write_same = 1,
};
diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index 36ac1c3..573f412 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -6305,7 +6305,8 @@
.use_clustering = ENABLE_CLUSTERING,
.shost_attrs = ipr_ioa_attrs,
.sdev_attrs = ipr_dev_attrs,
- .proc_name = IPR_NAME
+ .proc_name = IPR_NAME,
+ .no_write_same = 1,
};
/**
diff --git a/drivers/scsi/ips.c b/drivers/scsi/ips.c
index 8d5ea8a..52a216f 100644
--- a/drivers/scsi/ips.c
+++ b/drivers/scsi/ips.c
@@ -374,6 +374,7 @@
.sg_tablesize = IPS_MAX_SG,
.cmd_per_lun = 3,
.use_clustering = ENABLE_CLUSTERING,
+ .no_write_same = 1,
};
diff --git a/drivers/scsi/megaraid.c b/drivers/scsi/megaraid.c
index 90c95a3..816db12 100644
--- a/drivers/scsi/megaraid.c
+++ b/drivers/scsi/megaraid.c
@@ -4244,6 +4244,7 @@
.eh_device_reset_handler = megaraid_reset,
.eh_bus_reset_handler = megaraid_reset,
.eh_host_reset_handler = megaraid_reset,
+ .no_write_same = 1,
};
static int
diff --git a/drivers/scsi/megaraid/megaraid_mbox.c b/drivers/scsi/megaraid/megaraid_mbox.c
index d1a4b82..e2237a9 100644
--- a/drivers/scsi/megaraid/megaraid_mbox.c
+++ b/drivers/scsi/megaraid/megaraid_mbox.c
@@ -367,6 +367,7 @@
.eh_host_reset_handler = megaraid_reset_handler,
.change_queue_depth = megaraid_change_queue_depth,
.use_clustering = ENABLE_CLUSTERING,
+ .no_write_same = 1,
.sdev_attrs = megaraid_sdev_attrs,
.shost_attrs = megaraid_shost_attrs,
};
diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c
index 0a743a5..c99812b 100644
--- a/drivers/scsi/megaraid/megaraid_sas_base.c
+++ b/drivers/scsi/megaraid/megaraid_sas_base.c
@@ -2148,6 +2148,7 @@
.bios_param = megasas_bios_param,
.use_clustering = ENABLE_CLUSTERING,
.change_queue_depth = megasas_change_queue_depth,
+ .no_write_same = 1,
};
/**
diff --git a/drivers/scsi/pmcraid.c b/drivers/scsi/pmcraid.c
index bd6f743..f413ef7 100644
--- a/drivers/scsi/pmcraid.c
+++ b/drivers/scsi/pmcraid.c
@@ -4315,6 +4315,7 @@
.this_id = -1,
.sg_tablesize = PMCRAID_MAX_IOADLS,
.max_sectors = PMCRAID_IOA_MAX_SECTORS,
+ .no_write_same = 1,
.cmd_per_lun = PMCRAID_MAX_CMD_PER_LUN,
.use_clustering = ENABLE_CLUSTERING,
.shost_attrs = pmcraid_host_attrs,
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index e6c4bff..69725f7 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -2659,6 +2659,12 @@
{
struct scsi_device *sdev = sdkp->device;
+ if (sdev->host->no_write_same) {
+ sdev->no_write_same = 1;
+
+ return;
+ }
+
if (scsi_report_opcode(sdev, buffer, SD_BUF_SIZE, INQUIRY) < 0) {
/* too large values might cause issues with arcmsr */
int vpd_buf_len = 64;
diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c
index 1a28f56..17d7404 100644
--- a/drivers/scsi/storvsc_drv.c
+++ b/drivers/scsi/storvsc_drv.c
@@ -1697,6 +1697,7 @@
.use_clustering = DISABLE_CLUSTERING,
/* Make sure we dont get a sg segment crosses a page boundary */
.dma_boundary = PAGE_SIZE-1,
+ .no_write_same = 1,
};
enum {
diff --git a/include/scsi/scsi_host.h b/include/scsi/scsi_host.h
index 5460849..fe3b58e 100644
--- a/include/scsi/scsi_host.h
+++ b/include/scsi/scsi_host.h
@@ -475,6 +475,9 @@
*/
unsigned ordered_tag:1;
+ /* True if the controller does not support WRITE SAME */
+ unsigned no_write_same:1;
+
/*
* Countdown for host blocking with no commands outstanding.
*/
@@ -677,6 +680,9 @@
/* Don't resume host in EH */
unsigned eh_noresume:1;
+ /* The controller does not support WRITE SAME */
+ unsigned no_write_same:1;
+
/*
* Optional work queue to be utilized by the transport
*/
