| /* SPDX-License-Identifier: GPL-2.0-only */ |
| /* |
| * drivers/media/i2c/smiapp/ccs.h |
| * |
| * Generic driver for MIPI CCS/SMIA/SMIA++ compliant camera sensors |
| * |
| * Copyright (C) 2020 Intel Corporation |
| * Copyright (C) 2010--2012 Nokia Corporation |
| * Contact: Sakari Ailus <sakari.ailus@linux.intel.com> |
| */ |
| |
| #ifndef __CCS_H__ |
| #define __CCS_H__ |
| |
| #include <linux/mutex.h> |
| #include <linux/regmap.h> |
| #include <media/v4l2-ctrls.h> |
| #include <media/v4l2-subdev.h> |
| |
| #include "ccs-data.h" |
| #include "ccs-limits.h" |
| #include "ccs-quirk.h" |
| #include "ccs-regs.h" |
| #include "ccs-reg-access.h" |
| #include "../ccs-pll.h" |
| #include "smiapp-reg-defs.h" |
| |
| /* |
| * Standard SMIA++ constants |
| */ |
| #define SMIA_VERSION_1 10 |
| #define SMIAPP_VERSION_0_8 8 /* Draft 0.8 */ |
| #define SMIAPP_VERSION_0_9 9 /* Draft 0.9 */ |
| #define SMIAPP_VERSION_1 10 |
| |
| #define SMIAPP_PROFILE_0 0 |
| #define SMIAPP_PROFILE_1 1 |
| #define SMIAPP_PROFILE_2 2 |
| |
| #define SMIAPP_NVM_PAGE_SIZE 64 /* bytes */ |
| |
| #define SMIAPP_RESET_DELAY_CLOCKS 2400 |
| #define SMIAPP_RESET_DELAY(clk) \ |
| (1000 + (SMIAPP_RESET_DELAY_CLOCKS * 1000 \ |
| + (clk) / 1000 - 1) / ((clk) / 1000)) |
| |
| #define CCS_COLOUR_COMPONENTS 4 |
| |
| #define SMIAPP_NAME "smiapp" |
| #define CCS_NAME "ccs" |
| |
| #define CCS_DFL_I2C_ADDR (0x20 >> 1) /* Default I2C Address */ |
| #define CCS_ALT_I2C_ADDR (0x6e >> 1) /* Alternate I2C Address */ |
| |
| #define CCS_LIM(sensor, limit) \ |
| ccs_get_limit(sensor, CCS_L_##limit, 0) |
| |
| #define CCS_LIM_AT(sensor, limit, offset) \ |
| ccs_get_limit(sensor, CCS_L_##limit, CCS_L_##limit##_OFFSET(offset)) |
| |
| struct ccs_flash_strobe_parms { |
| u8 mode; |
| u32 strobe_width_high_us; |
| u16 strobe_delay; |
| u16 stobe_start_point; |
| u8 trigger; |
| }; |
| |
| struct ccs_hwconfig { |
| /* |
| * Change the cci address if i2c_addr_alt is set. |
| * Both default and alternate cci addr need to be present |
| */ |
| unsigned short i2c_addr_dfl; /* Default i2c addr */ |
| unsigned short i2c_addr_alt; /* Alternate i2c addr */ |
| |
| u32 ext_clk; /* sensor external clk */ |
| |
| unsigned int lanes; /* Number of CSI-2 lanes */ |
| u32 csi_signalling_mode; /* CCS_CSI_SIGNALLING_MODE_* */ |
| u64 *op_sys_clock; |
| |
| struct ccs_flash_strobe_parms *strobe_setup; |
| }; |
| |
| struct ccs_quirk; |
| |
| #define CCS_MODULE_IDENT_FLAG_REV_LE (1 << 0) |
| |
| struct ccs_module_ident { |
| u16 mipi_manufacturer_id; |
| u16 model_id; |
| u8 smia_manufacturer_id; |
| u8 revision_number_major; |
| |
| u8 flags; |
| |
| char *name; |
| const struct ccs_quirk *quirk; |
| }; |
| |
| struct ccs_module_info { |
| u32 smia_manufacturer_id; |
| u32 mipi_manufacturer_id; |
| u32 model_id; |
| u32 revision_number; |
| |
| u32 module_year; |
| u32 module_month; |
| u32 module_day; |
| |
| u32 sensor_smia_manufacturer_id; |
| u32 sensor_mipi_manufacturer_id; |
| u32 sensor_model_id; |
| u32 sensor_revision_number; |
| u32 sensor_firmware_version; |
| |
| u32 smia_version; |
| u32 smiapp_version; |
| u32 ccs_version; |
| |
| char *name; |
| const struct ccs_quirk *quirk; |
| }; |
| |
| #define CCS_IDENT_FQ(manufacturer, model, rev, fl, _name, _quirk) \ |
| { .smia_manufacturer_id = manufacturer, \ |
| .model_id = model, \ |
| .revision_number_major = rev, \ |
| .flags = fl, \ |
| .name = _name, \ |
| .quirk = _quirk, } |
| |
| #define CCS_IDENT_LQ(manufacturer, model, rev, _name, _quirk) \ |
| { .smia_manufacturer_id = manufacturer, \ |
| .model_id = model, \ |
| .revision_number_major = rev, \ |
| .flags = CCS_MODULE_IDENT_FLAG_REV_LE, \ |
| .name = _name, \ |
| .quirk = _quirk, } |
| |
| #define CCS_IDENT_L(manufacturer, model, rev, _name) \ |
| { .smia_manufacturer_id = manufacturer, \ |
| .model_id = model, \ |
| .revision_number_major = rev, \ |
| .flags = CCS_MODULE_IDENT_FLAG_REV_LE, \ |
| .name = _name, } |
| |
| #define CCS_IDENT_Q(manufacturer, model, rev, _name, _quirk) \ |
| { .smia_manufacturer_id = manufacturer, \ |
| .model_id = model, \ |
| .revision_number_major = rev, \ |
| .flags = 0, \ |
| .name = _name, \ |
| .quirk = _quirk, } |
| |
| #define CCS_IDENT(manufacturer, model, rev, _name) \ |
| { .smia_manufacturer_id = manufacturer, \ |
| .model_id = model, \ |
| .revision_number_major = rev, \ |
| .flags = 0, \ |
| .name = _name, } |
| |
| struct ccs_csi_data_format { |
| u32 code; |
| u8 width; |
| u8 compressed; |
| u8 pixel_order; |
| }; |
| |
| #define CCS_SUBDEVS 3 |
| |
| #define CCS_PA_PAD_SRC 0 |
| #define CCS_PAD_SINK 0 |
| #define CCS_PAD_SRC 1 |
| #define CCS_PADS 2 |
| |
| struct ccs_binning_subtype { |
| u8 horizontal:4; |
| u8 vertical:4; |
| } __packed; |
| |
| struct ccs_subdev { |
| struct v4l2_subdev sd; |
| struct media_pad pads[CCS_PADS]; |
| unsigned short sink_pad; |
| unsigned short source_pad; |
| int npads; |
| struct ccs_sensor *sensor; |
| struct v4l2_ctrl_handler ctrl_handler; |
| }; |
| |
| /* |
| * struct ccs_sensor - Main device structure |
| */ |
| struct ccs_sensor { |
| /* |
| * "mutex" is used to serialise access to all fields here |
| * except v4l2_ctrls at the end of the struct. "mutex" is also |
| * used to serialise access to file handle specific |
| * information. |
| */ |
| struct mutex mutex; |
| struct ccs_subdev ssds[CCS_SUBDEVS]; |
| u32 ssds_used; |
| struct ccs_subdev *src; |
| struct ccs_subdev *binner; |
| struct ccs_subdev *scaler; |
| struct ccs_subdev *pixel_array; |
| struct ccs_hwconfig hwcfg; |
| struct regulator_bulk_data *regulators; |
| struct clk *ext_clk; |
| struct gpio_desc *xshutdown; |
| struct gpio_desc *reset; |
| struct regmap *regmap; |
| void *ccs_limits; |
| u8 nbinning_subtypes; |
| struct ccs_binning_subtype binning_subtypes[CCS_LIM_BINNING_SUB_TYPE_MAX_N + 1]; |
| u32 mbus_frame_fmts; |
| const struct ccs_csi_data_format *csi_format; |
| const struct ccs_csi_data_format *internal_csi_format; |
| struct v4l2_rect pa_src, scaler_sink, src_src; |
| u32 default_mbus_frame_fmts; |
| int default_pixel_order; |
| struct ccs_data_container sdata, mdata; |
| |
| u8 binning_horizontal; |
| u8 binning_vertical; |
| |
| u8 scale_m; |
| u8 scaling_mode; |
| |
| u8 frame_skip; |
| u16 embedded_start; /* embedded data start line */ |
| u16 embedded_end; |
| u16 image_start; /* image data start line */ |
| u16 visible_pixel_start; /* start pixel of the visible image */ |
| |
| bool streaming; |
| bool dev_init_done; |
| bool handler_setup_needed; |
| u8 compressed_min_bpp; |
| |
| struct ccs_module_info minfo; |
| |
| struct ccs_pll pll; |
| |
| /* Is a default format supported for a given BPP? */ |
| unsigned long *valid_link_freqs; |
| |
| /* Pixel array controls */ |
| struct v4l2_ctrl *exposure; |
| struct v4l2_ctrl *hflip; |
| struct v4l2_ctrl *vflip; |
| struct v4l2_ctrl *vblank; |
| struct v4l2_ctrl *hblank; |
| struct v4l2_ctrl *pixel_rate_parray; |
| struct v4l2_ctrl *luminance_level; |
| /* src controls */ |
| struct v4l2_ctrl *link_freq; |
| struct v4l2_ctrl *pixel_rate_csi; |
| /* test pattern colour components */ |
| struct v4l2_ctrl *test_data[CCS_COLOUR_COMPONENTS]; |
| }; |
| |
| #define to_ccs_subdev(_sd) \ |
| container_of(_sd, struct ccs_subdev, sd) |
| |
| #define to_ccs_sensor(_sd) \ |
| (to_ccs_subdev(_sd)->sensor) |
| |
| void ccs_replace_limit(struct ccs_sensor *sensor, |
| unsigned int limit, unsigned int offset, u32 val); |
| u32 ccs_get_limit(struct ccs_sensor *sensor, unsigned int limit, |
| unsigned int offset); |
| |
| #endif /* __CCS_H__ */ |