OMAP: Print Initiator name for l3 custom error.
The initiator id gets logged in the l3 target registers for custom error.
So print it to aid debugging.
Based on a internal patch by Devaraj Rangasamy <dev@ti.com>
Signed-off-by: sricharan <r.sricharan@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
diff --git a/arch/arm/mach-omap2/omap_l3_noc.c b/arch/arm/mach-omap2/omap_l3_noc.c
index 8f18357..07a3d3e 100644
--- a/arch/arm/mach-omap2/omap_l3_noc.c
+++ b/arch/arm/mach-omap2/omap_l3_noc.c
@@ -56,11 +56,11 @@
{
struct omap4_l3 *l3 = _l3;
- int inttype, i;
+ int inttype, i, k;
int err_src = 0;
- u32 std_err_main, err_reg, clear;
+ u32 std_err_main, err_reg, clear, masterid;
void __iomem *base, *l3_targ_base;
- char *source_name;
+ char *target_name, *master_name = "UN IDENTIFIED";
/* Get the Type of interrupt */
inttype = irq == l3->app_irq ? L3_APPLICATION_ERROR : L3_DEBUG_ERROR;
@@ -83,13 +83,15 @@
l3_targ_base = base + *(l3_targ[i] + err_src);
std_err_main = __raw_readl(l3_targ_base +
L3_TARG_STDERRLOG_MAIN);
+ masterid = __raw_readl(l3_targ_base +
+ L3_TARG_STDERRLOG_MSTADDR);
switch (std_err_main & CUSTOM_ERROR) {
case STANDARD_ERROR:
- source_name =
+ target_name =
l3_targ_inst_name[i][err_src];
- WARN(true, "L3 standard error: SOURCE:%s at address 0x%x\n",
- source_name,
+ WARN(true, "L3 standard error: TARGET:%s at address 0x%x\n",
+ target_name,
__raw_readl(l3_targ_base +
L3_TARG_STDERRLOG_SLVOFSLSB));
/* clear the std error log*/
@@ -99,11 +101,15 @@
break;
case CUSTOM_ERROR:
- source_name =
+ target_name =
l3_targ_inst_name[i][err_src];
-
- WARN(true, "L3 custom error: SOURCE:%s\n",
- source_name);
+ for (k = 0; k < NUM_OF_L3_MASTERS; k++) {
+ if (masterid == l3_masters[k].id)
+ master_name =
+ l3_masters[k].name;
+ }
+ WARN(true, "L3 custom error: MASTER:%s TARGET:%s\n",
+ master_name, target_name);
/* clear the std error log*/
clear = std_err_main | CLEAR_STDERR_LOG;
writel(clear, l3_targ_base +
diff --git a/arch/arm/mach-omap2/omap_l3_noc.h b/arch/arm/mach-omap2/omap_l3_noc.h
index 74c1643..90b5098 100644
--- a/arch/arm/mach-omap2/omap_l3_noc.h
+++ b/arch/arm/mach-omap2/omap_l3_noc.h
@@ -34,8 +34,11 @@
/* L3 TARG register offsets */
#define L3_TARG_STDERRLOG_MAIN 0x48
#define L3_TARG_STDERRLOG_SLVOFSLSB 0x5c
+#define L3_TARG_STDERRLOG_MSTADDR 0x68
#define L3_FLAGMUX_REGERR0 0xc
+#define NUM_OF_L3_MASTERS (sizeof(l3_masters)/sizeof(l3_masters[0]))
+
static u32 l3_flagmux[L3_MODULES] = {
0x500,
0x1000,
@@ -76,6 +79,37 @@
0x0100 /* EMUSS */
};
+static struct l3_masters_data {
+ u32 id;
+ char name[10];
+} l3_masters[] = {
+ { 0x0 , "MPU"},
+ { 0x10, "CS_ADP"},
+ { 0x14, "xxx"},
+ { 0x20, "DSP"},
+ { 0x30, "IVAHD"},
+ { 0x40, "ISS"},
+ { 0x44, "DucatiM3"},
+ { 0x48, "FaceDetect"},
+ { 0x50, "SDMA_Rd"},
+ { 0x54, "SDMA_Wr"},
+ { 0x58, "xxx"},
+ { 0x5C, "xxx"},
+ { 0x60, "SGX"},
+ { 0x70, "DSS"},
+ { 0x80, "C2C"},
+ { 0x88, "xxx"},
+ { 0x8C, "xxx"},
+ { 0x90, "HSI"},
+ { 0xA0, "MMC1"},
+ { 0xA4, "MMC2"},
+ { 0xA8, "MMC6"},
+ { 0xB0, "UNIPRO1"},
+ { 0xC0, "USBHOSTHS"},
+ { 0xC4, "USBOTGHS"},
+ { 0xC8, "USBHOSTFS"}
+};
+
static char *l3_targ_inst_name[L3_MODULES][18] = {
{
"DMM1",
