// SPDX-License-Identifier: GPL-2.0+
/*
 * AD4000 SPI ADC driver
 *
 * Copyright 2024 Analog Devices Inc.
 */
#include <linux/bits.h>
#include <linux/bitfield.h>
#include <linux/byteorder/generic.h>
#include <linux/cleanup.h>
#include <linux/device.h>
#include <linux/err.h>
#include <linux/math.h>
#include <linux/module.h>
#include <linux/mod_devicetable.h>
#include <linux/gpio/consumer.h>
#include <linux/regulator/consumer.h>
#include <linux/spi/spi.h>
#include <linux/units.h>
#include <linux/util_macros.h>
#include <linux/iio/iio.h>

#include <linux/iio/buffer.h>
#include <linux/iio/triggered_buffer.h>
#include <linux/iio/trigger_consumer.h>

#define AD4000_READ_COMMAND	0x54
#define AD4000_WRITE_COMMAND	0x14

#define AD4000_CONFIG_REG_DEFAULT	0xE1

/* AD4000 Configuration Register programmable bits */
#define AD4000_CFG_SPAN_COMP		BIT(3) /* Input span compression  */
#define AD4000_CFG_HIGHZ		BIT(2) /* High impedance mode  */

#define AD4000_SCALE_OPTIONS		2

#define AD4000_TQUIET1_NS		190
#define AD4000_TQUIET2_NS		60
#define AD4000_TCONV_NS			320

#define __AD4000_DIFF_CHANNEL(_sign, _real_bits, _storage_bits, _reg_access)	\
{										\
	.type = IIO_VOLTAGE,							\
	.indexed = 1,								\
	.differential = 1,							\
	.channel = 0,								\
	.channel2 = 1,								\
	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |				\
			      BIT(IIO_CHAN_INFO_SCALE),				\
	.info_mask_separate_available = _reg_access ? BIT(IIO_CHAN_INFO_SCALE) : 0,\
	.scan_type = {								\
		.sign = _sign,							\
		.realbits = _real_bits,						\
		.storagebits = _storage_bits,					\
		.shift = _storage_bits - _real_bits,				\
		.endianness = IIO_BE,						\
	},									\
}

#define AD4000_DIFF_CHANNEL(_sign, _real_bits, _reg_access)			\
	__AD4000_DIFF_CHANNEL((_sign), (_real_bits),				\
				     ((_real_bits) > 16 ? 32 : 16), (_reg_access))

#define __AD4000_PSEUDO_DIFF_CHANNEL(_sign, _real_bits, _storage_bits, _reg_access)\
{										\
	.type = IIO_VOLTAGE,							\
	.indexed = 1,								\
	.channel = 0,								\
	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |				\
			      BIT(IIO_CHAN_INFO_SCALE) |			\
			      BIT(IIO_CHAN_INFO_OFFSET),			\
	.info_mask_separate_available = _reg_access ? BIT(IIO_CHAN_INFO_SCALE) : 0,\
	.scan_type = {								\
		.sign = _sign,							\
		.realbits = _real_bits,						\
		.storagebits = _storage_bits,					\
		.shift = _storage_bits - _real_bits,				\
		.endianness = IIO_BE,						\
	},									\
}

#define AD4000_PSEUDO_DIFF_CHANNEL(_sign, _real_bits, _reg_access)		\
	__AD4000_PSEUDO_DIFF_CHANNEL((_sign), (_real_bits),			\
				     ((_real_bits) > 16 ? 32 : 16), (_reg_access))

static const char * const ad4000_power_supplies[] = {
	"vdd", "vio"
};

enum ad4000_sdi {
	AD4000_SDI_MOSI,
	AD4000_SDI_VIO,
	AD4000_SDI_CS,
	AD4000_SDI_GND,
};

/* maps adi,sdi-pin property value to enum */
static const char * const ad4000_sdi_pin[] = {
	[AD4000_SDI_MOSI] = "sdi",
	[AD4000_SDI_VIO] = "high",
	[AD4000_SDI_CS] = "cs",
	[AD4000_SDI_GND] = "low",
};

/* Gains stored as fractions of 1000 so they can be expressed by integers. */
static const int ad4000_gains[] = {
	454, 909, 1000, 1900,
};

struct ad4000_chip_info {
	const char *dev_name;
	struct iio_chan_spec chan_spec;
	struct iio_chan_spec reg_access_chan_spec;
	bool has_hardware_gain;
};

static const struct ad4000_chip_info ad4000_chip_info = {
	.dev_name = "ad4000",
	.chan_spec = AD4000_PSEUDO_DIFF_CHANNEL('u', 16, 0),
	.reg_access_chan_spec = AD4000_PSEUDO_DIFF_CHANNEL('u', 16, 1),
};

static const struct ad4000_chip_info ad4001_chip_info = {
	.dev_name = "ad4001",
	.chan_spec = AD4000_DIFF_CHANNEL('s', 16, 0),
	.reg_access_chan_spec = AD4000_DIFF_CHANNEL('s', 16, 1),
};

static const struct ad4000_chip_info ad4002_chip_info = {
	.dev_name = "ad4002",
	.chan_spec = AD4000_PSEUDO_DIFF_CHANNEL('u', 18, 0),
	.reg_access_chan_spec = AD4000_PSEUDO_DIFF_CHANNEL('u', 18, 1),
};

static const struct ad4000_chip_info ad4003_chip_info = {
	.dev_name = "ad4003",
	.chan_spec = AD4000_DIFF_CHANNEL('s', 18, 0),
	.reg_access_chan_spec = AD4000_DIFF_CHANNEL('s', 18, 1),
};

static const struct ad4000_chip_info ad4004_chip_info = {
	.dev_name = "ad4004",
	.chan_spec = AD4000_PSEUDO_DIFF_CHANNEL('u', 16, 0),
	.reg_access_chan_spec = AD4000_PSEUDO_DIFF_CHANNEL('u', 16, 1),
};

static const struct ad4000_chip_info ad4005_chip_info = {
	.dev_name = "ad4005",
	.chan_spec = AD4000_DIFF_CHANNEL('s', 16, 0),
	.reg_access_chan_spec = AD4000_DIFF_CHANNEL('s', 16, 1),
};

static const struct ad4000_chip_info ad4006_chip_info = {
	.dev_name = "ad4006",
	.chan_spec = AD4000_PSEUDO_DIFF_CHANNEL('u', 18, 0),
	.reg_access_chan_spec = AD4000_PSEUDO_DIFF_CHANNEL('u', 18, 1),
};

static const struct ad4000_chip_info ad4007_chip_info = {
	.dev_name = "ad4007",
	.chan_spec = AD4000_DIFF_CHANNEL('s', 18, 0),
	.reg_access_chan_spec = AD4000_DIFF_CHANNEL('s', 18, 1),
};

static const struct ad4000_chip_info ad4008_chip_info = {
	.dev_name = "ad4008",
	.chan_spec = AD4000_PSEUDO_DIFF_CHANNEL('u', 16, 0),
	.reg_access_chan_spec = AD4000_PSEUDO_DIFF_CHANNEL('u', 16, 1),
};

static const struct ad4000_chip_info ad4010_chip_info = {
	.dev_name = "ad4010",
	.chan_spec = AD4000_PSEUDO_DIFF_CHANNEL('u', 18, 0),
	.reg_access_chan_spec = AD4000_PSEUDO_DIFF_CHANNEL('u', 18, 1),
};

static const struct ad4000_chip_info ad4011_chip_info = {
	.dev_name = "ad4011",
	.chan_spec = AD4000_DIFF_CHANNEL('s', 18, 0),
	.reg_access_chan_spec = AD4000_DIFF_CHANNEL('s', 18, 1),
};

static const struct ad4000_chip_info ad4020_chip_info = {
	.dev_name = "ad4020",
	.chan_spec = AD4000_DIFF_CHANNEL('s', 20, 0),
	.reg_access_chan_spec = AD4000_DIFF_CHANNEL('s', 20, 1),
};

static const struct ad4000_chip_info ad4021_chip_info = {
	.dev_name = "ad4021",
	.chan_spec = AD4000_DIFF_CHANNEL('s', 20, 0),
	.reg_access_chan_spec = AD4000_DIFF_CHANNEL('s', 20, 1),
};

static const struct ad4000_chip_info ad4022_chip_info = {
	.dev_name = "ad4022",
	.chan_spec = AD4000_DIFF_CHANNEL('s', 20, 0),
	.reg_access_chan_spec = AD4000_DIFF_CHANNEL('s', 20, 1),
};

static const struct ad4000_chip_info adaq4001_chip_info = {
	.dev_name = "adaq4001",
	.chan_spec = AD4000_DIFF_CHANNEL('s', 16, 0),
	.reg_access_chan_spec = AD4000_DIFF_CHANNEL('s', 16, 1),
	.has_hardware_gain = true,
};

static const struct ad4000_chip_info adaq4003_chip_info = {
	.dev_name = "adaq4003",
	.chan_spec = AD4000_DIFF_CHANNEL('s', 18, 0),
	.reg_access_chan_spec = AD4000_DIFF_CHANNEL('s', 18, 1),
	.has_hardware_gain = true,
};

struct ad4000_state {
	struct spi_device *spi;
	struct gpio_desc *cnv_gpio;
	struct spi_transfer xfers[2];
	struct spi_message msg;
	struct mutex lock; /* Protect read modify write cycle */
	int vref_mv;
	enum ad4000_sdi sdi_pin;
	bool span_comp;
	u16 gain_milli;
	int scale_tbl[AD4000_SCALE_OPTIONS][2];

	/*
	 * DMA (thus cache coherency maintenance) requires the transfer buffers
	 * to live in their own cache lines.
	 */
	struct {
		union {
			__be16 sample_buf16;
			__be32 sample_buf32;
		} data;
		s64 timestamp __aligned(8);
	} scan __aligned(IIO_DMA_MINALIGN);
	u8 tx_buf[2];
	u8 rx_buf[2];
};

static void ad4000_fill_scale_tbl(struct ad4000_state *st,
				  struct iio_chan_spec const *chan)
{
	int val, tmp0, tmp1;
	int scale_bits;
	u64 tmp2;

	/*
	 * ADCs that output two's complement code have one less bit to express
	 * voltage magnitude.
	 */
	if (chan->scan_type.sign == 's')
		scale_bits = chan->scan_type.realbits - 1;
	else
		scale_bits = chan->scan_type.realbits;

	/*
	 * The gain is stored as a fraction of 1000 and, as we need to
	 * divide vref_mv by the gain, we invert the gain/1000 fraction.
	 * Also multiply by an extra MILLI to preserve precision.
	 * Thus, we have MILLI * MILLI equals MICRO as fraction numerator.
	 */
	val = mult_frac(st->vref_mv, MICRO, st->gain_milli);

	/* Would multiply by NANO here but we multiplied by extra MILLI */
	tmp2 = shift_right((u64)val * MICRO, scale_bits);
	tmp0 = div_s64_rem(tmp2, NANO, &tmp1);

	/* Store scale for when span compression is disabled */
	st->scale_tbl[0][0] = tmp0; /* Integer part */
	st->scale_tbl[0][1] = abs(tmp1); /* Fractional part */

	/* Store scale for when span compression is enabled */
	st->scale_tbl[1][0] = tmp0;

	/* The integer part is always zero so don't bother to divide it. */
	if (chan->differential)
		st->scale_tbl[1][1] = DIV_ROUND_CLOSEST(abs(tmp1) * 4, 5);
	else
		st->scale_tbl[1][1] = DIV_ROUND_CLOSEST(abs(tmp1) * 9, 10);
}

static int ad4000_write_reg(struct ad4000_state *st, uint8_t val)
{
	st->tx_buf[0] = AD4000_WRITE_COMMAND;
	st->tx_buf[1] = val;
	return spi_write(st->spi, st->tx_buf, ARRAY_SIZE(st->tx_buf));
}

static int ad4000_read_reg(struct ad4000_state *st, unsigned int *val)
{
	struct spi_transfer t = {
		.tx_buf = st->tx_buf,
		.rx_buf = st->rx_buf,
		.len = 2,
	};
	int ret;

	st->tx_buf[0] = AD4000_READ_COMMAND;
	ret = spi_sync_transfer(st->spi, &t, 1);
	if (ret < 0)
		return ret;

	*val = st->rx_buf[1];
	return ret;
}

static int ad4000_convert_and_acquire(struct ad4000_state *st)
{
	int ret;

	/*
	 * In 4-wire mode, the CNV line is held high for the entire conversion
	 * and acquisition process. In other modes, the CNV GPIO is optional
	 * and, if provided, replaces controller CS. If CNV GPIO is not defined
	 * gpiod_set_value_cansleep() has no effect.
	 */
	gpiod_set_value_cansleep(st->cnv_gpio, 1);
	ret = spi_sync(st->spi, &st->msg);
	gpiod_set_value_cansleep(st->cnv_gpio, 0);

	return ret;
}

static int ad4000_single_conversion(struct iio_dev *indio_dev,
				    const struct iio_chan_spec *chan, int *val)
{
	struct ad4000_state *st = iio_priv(indio_dev);
	u32 sample;
	int ret;

	ret = ad4000_convert_and_acquire(st);
	if (ret < 0)
		return ret;

	if (chan->scan_type.storagebits > 16)
		sample = be32_to_cpu(st->scan.data.sample_buf32);
	else
		sample = be16_to_cpu(st->scan.data.sample_buf16);

	sample >>= chan->scan_type.shift;

	if (chan->scan_type.sign == 's')
		*val = sign_extend32(sample, chan->scan_type.realbits - 1);

	return IIO_VAL_INT;
}

static int ad4000_read_raw(struct iio_dev *indio_dev,
			   struct iio_chan_spec const *chan, int *val,
			   int *val2, long info)
{
	struct ad4000_state *st = iio_priv(indio_dev);

	switch (info) {
	case IIO_CHAN_INFO_RAW:
		iio_device_claim_direct_scoped(return -EBUSY, indio_dev)
			return ad4000_single_conversion(indio_dev, chan, val);
		unreachable();
	case IIO_CHAN_INFO_SCALE:
		*val = st->scale_tbl[st->span_comp][0];
		*val2 = st->scale_tbl[st->span_comp][1];
		return IIO_VAL_INT_PLUS_NANO;
	case IIO_CHAN_INFO_OFFSET:
		*val = 0;
		if (st->span_comp)
			*val = mult_frac(st->vref_mv, 1, 10);

		return IIO_VAL_INT;
	default:
		return -EINVAL;
	}
}

static int ad4000_read_avail(struct iio_dev *indio_dev,
			     struct iio_chan_spec const *chan,
			     const int **vals, int *type, int *length,
			     long info)
{
	struct ad4000_state *st = iio_priv(indio_dev);

	switch (info) {
	case IIO_CHAN_INFO_SCALE:
		*vals = (int *)st->scale_tbl;
		*length = AD4000_SCALE_OPTIONS * 2;
		*type = IIO_VAL_INT_PLUS_NANO;
		return IIO_AVAIL_LIST;
	default:
		return -EINVAL;
	}
}

static int ad4000_write_raw_get_fmt(struct iio_dev *indio_dev,
				    struct iio_chan_spec const *chan, long mask)
{
	switch (mask) {
	case IIO_CHAN_INFO_SCALE:
		return IIO_VAL_INT_PLUS_NANO;
	default:
		return IIO_VAL_INT_PLUS_MICRO;
	}
}

static int ad4000_write_raw(struct iio_dev *indio_dev,
			    struct iio_chan_spec const *chan, int val, int val2,
			    long mask)
{
	struct ad4000_state *st = iio_priv(indio_dev);
	unsigned int reg_val;
	bool span_comp_en;
	int ret;

	switch (mask) {
	case IIO_CHAN_INFO_SCALE:
		iio_device_claim_direct_scoped(return -EBUSY, indio_dev) {
			guard(mutex)(&st->lock);

			ret = ad4000_read_reg(st, &reg_val);
			if (ret < 0)
				return ret;

			span_comp_en = val2 == st->scale_tbl[1][1];
			reg_val &= ~AD4000_CFG_SPAN_COMP;
			reg_val |= FIELD_PREP(AD4000_CFG_SPAN_COMP, span_comp_en);

			ret = ad4000_write_reg(st, reg_val);
			if (ret < 0)
				return ret;

			st->span_comp = span_comp_en;
			return 0;
		}
		unreachable();
	default:
		return -EINVAL;
	}
}

static irqreturn_t ad4000_trigger_handler(int irq, void *p)
{
	struct iio_poll_func *pf = p;
	struct iio_dev *indio_dev = pf->indio_dev;
	struct ad4000_state *st = iio_priv(indio_dev);
	int ret;

	ret = ad4000_convert_and_acquire(st);
	if (ret < 0)
		goto err_out;

	iio_push_to_buffers_with_timestamp(indio_dev, &st->scan, pf->timestamp);

err_out:
	iio_trigger_notify_done(indio_dev->trig);
	return IRQ_HANDLED;
}

static const struct iio_info ad4000_reg_access_info = {
	.read_raw = &ad4000_read_raw,
	.read_avail = &ad4000_read_avail,
	.write_raw = &ad4000_write_raw,
	.write_raw_get_fmt = &ad4000_write_raw_get_fmt,
};

static const struct iio_info ad4000_info = {
	.read_raw = &ad4000_read_raw,
};

/*
 * This executes a data sample transfer for when the device connections are
 * in "3-wire" mode, selected when the adi,sdi-pin device tree property is
 * absent or set to "high". In this connection mode, the ADC SDI pin is
 * connected to MOSI or to VIO and ADC CNV pin is connected either to a SPI
 * controller CS or to a GPIO.
 * AD4000 series of devices initiate conversions on the rising edge of CNV pin.
 *
 * If the CNV pin is connected to an SPI controller CS line (which is by default
 * active low), the ADC readings would have a latency (delay) of one read.
 * Moreover, since we also do ADC sampling for filling the buffer on triggered
 * buffer mode, the timestamps of buffer readings would be disarranged.
 * To prevent the read latency and reduce the time discrepancy between the
 * sample read request and the time of actual sampling by the ADC, do a
 * preparatory transfer to pulse the CS/CNV line.
 */
static int ad4000_prepare_3wire_mode_message(struct ad4000_state *st,
					     const struct iio_chan_spec *chan)
{
	unsigned int cnv_pulse_time = AD4000_TCONV_NS;
	struct spi_transfer *xfers = st->xfers;

	xfers[0].cs_change = 1;
	xfers[0].cs_change_delay.value = cnv_pulse_time;
	xfers[0].cs_change_delay.unit = SPI_DELAY_UNIT_NSECS;

	xfers[1].rx_buf = &st->scan.data;
	xfers[1].len = BITS_TO_BYTES(chan->scan_type.storagebits);
	xfers[1].delay.value = AD4000_TQUIET2_NS;
	xfers[1].delay.unit = SPI_DELAY_UNIT_NSECS;

	spi_message_init_with_transfers(&st->msg, st->xfers, 2);

	return devm_spi_optimize_message(&st->spi->dev, st->spi, &st->msg);
}

/*
 * This executes a data sample transfer for when the device connections are
 * in "4-wire" mode, selected when the adi,sdi-pin device tree property is
 * set to "cs". In this connection mode, the controller CS pin is connected to
 * ADC SDI pin and a GPIO is connected to ADC CNV pin.
 * The GPIO connected to ADC CNV pin is set outside of the SPI transfer.
 */
static int ad4000_prepare_4wire_mode_message(struct ad4000_state *st,
					     const struct iio_chan_spec *chan)
{
	unsigned int cnv_to_sdi_time = AD4000_TCONV_NS;
	struct spi_transfer *xfers = st->xfers;

	/*
	 * Dummy transfer to cause enough delay between CNV going high and SDI
	 * going low.
	 */
	xfers[0].cs_off = 1;
	xfers[0].delay.value = cnv_to_sdi_time;
	xfers[0].delay.unit = SPI_DELAY_UNIT_NSECS;

	xfers[1].rx_buf = &st->scan.data;
	xfers[1].len = BITS_TO_BYTES(chan->scan_type.storagebits);

	spi_message_init_with_transfers(&st->msg, st->xfers, 2);

	return devm_spi_optimize_message(&st->spi->dev, st->spi, &st->msg);
}

static int ad4000_config(struct ad4000_state *st)
{
	unsigned int reg_val = AD4000_CONFIG_REG_DEFAULT;

	if (device_property_present(&st->spi->dev, "adi,high-z-input"))
		reg_val |= FIELD_PREP(AD4000_CFG_HIGHZ, 1);

	return ad4000_write_reg(st, reg_val);
}

static int ad4000_probe(struct spi_device *spi)
{
	const struct ad4000_chip_info *chip;
	struct device *dev = &spi->dev;
	struct iio_dev *indio_dev;
	struct ad4000_state *st;
	int gain_idx, ret;

	indio_dev = devm_iio_device_alloc(dev, sizeof(*st));
	if (!indio_dev)
		return -ENOMEM;

	chip = spi_get_device_match_data(spi);
	if (!chip)
		return -EINVAL;

	st = iio_priv(indio_dev);
	st->spi = spi;

	ret = devm_regulator_bulk_get_enable(dev, ARRAY_SIZE(ad4000_power_supplies),
					     ad4000_power_supplies);
	if (ret)
		return dev_err_probe(dev, ret, "Failed to enable power supplies\n");

	ret = devm_regulator_get_enable_read_voltage(dev, "ref");
	if (ret < 0)
		return dev_err_probe(dev, ret,
				     "Failed to get ref regulator reference\n");
	st->vref_mv = ret / 1000;

	st->cnv_gpio = devm_gpiod_get_optional(dev, "cnv", GPIOD_OUT_HIGH);
	if (IS_ERR(st->cnv_gpio))
		return dev_err_probe(dev, PTR_ERR(st->cnv_gpio),
				     "Failed to get CNV GPIO");

	ret = device_property_match_property_string(dev, "adi,sdi-pin",
						    ad4000_sdi_pin,
						    ARRAY_SIZE(ad4000_sdi_pin));
	if (ret < 0 && ret != -EINVAL)
		return dev_err_probe(dev, ret,
				     "getting adi,sdi-pin property failed\n");

	/* Default to usual SPI connections if pin properties are not present */
	st->sdi_pin = ret == -EINVAL ? AD4000_SDI_MOSI : ret;
	switch (st->sdi_pin) {
	case AD4000_SDI_MOSI:
		indio_dev->info = &ad4000_reg_access_info;
		indio_dev->channels = &chip->reg_access_chan_spec;

		/*
		 * In "3-wire mode", the ADC SDI line must be kept high when
		 * data is not being clocked out of the controller.
		 * Request the SPI controller to make MOSI idle high.
		 */
		spi->mode |= SPI_MOSI_IDLE_HIGH;
		ret = spi_setup(spi);
		if (ret < 0)
			return ret;

		ret = ad4000_prepare_3wire_mode_message(st, indio_dev->channels);
		if (ret)
			return ret;

		ret = ad4000_config(st);
		if (ret < 0)
			return dev_err_probe(dev, ret, "Failed to config device\n");

		break;
	case AD4000_SDI_VIO:
		indio_dev->info = &ad4000_info;
		indio_dev->channels = &chip->chan_spec;
		ret = ad4000_prepare_3wire_mode_message(st, indio_dev->channels);
		if (ret)
			return ret;

		break;
	case AD4000_SDI_CS:
		indio_dev->info = &ad4000_info;
		indio_dev->channels = &chip->chan_spec;
		ret = ad4000_prepare_4wire_mode_message(st, indio_dev->channels);
		if (ret)
			return ret;

		break;
	case AD4000_SDI_GND:
		return dev_err_probe(dev, -EPROTONOSUPPORT,
				     "Unsupported connection mode\n");

	default:
		return dev_err_probe(dev, -EINVAL, "Unrecognized connection mode\n");
	}

	indio_dev->name = chip->dev_name;
	indio_dev->num_channels = 1;

	devm_mutex_init(dev, &st->lock);

	st->gain_milli = 1000;
	if (chip->has_hardware_gain) {
		ret = device_property_read_u16(dev, "adi,gain-milli",
					       &st->gain_milli);
		if (!ret) {
			/* Match gain value from dt to one of supported gains */
			gain_idx = find_closest(st->gain_milli, ad4000_gains,
						ARRAY_SIZE(ad4000_gains));
			st->gain_milli = ad4000_gains[gain_idx];
		} else {
			return dev_err_probe(dev, ret,
					     "Failed to read gain property\n");
		}
	}

	ad4000_fill_scale_tbl(st, indio_dev->channels);

	ret = devm_iio_triggered_buffer_setup(dev, indio_dev,
					      &iio_pollfunc_store_time,
					      &ad4000_trigger_handler, NULL);
	if (ret)
		return ret;

	return devm_iio_device_register(dev, indio_dev);
}

static const struct spi_device_id ad4000_id[] = {
	{ "ad4000", (kernel_ulong_t)&ad4000_chip_info },
	{ "ad4001", (kernel_ulong_t)&ad4001_chip_info },
	{ "ad4002", (kernel_ulong_t)&ad4002_chip_info },
	{ "ad4003", (kernel_ulong_t)&ad4003_chip_info },
	{ "ad4004", (kernel_ulong_t)&ad4004_chip_info },
	{ "ad4005", (kernel_ulong_t)&ad4005_chip_info },
	{ "ad4006", (kernel_ulong_t)&ad4006_chip_info },
	{ "ad4007", (kernel_ulong_t)&ad4007_chip_info },
	{ "ad4008", (kernel_ulong_t)&ad4008_chip_info },
	{ "ad4010", (kernel_ulong_t)&ad4010_chip_info },
	{ "ad4011", (kernel_ulong_t)&ad4011_chip_info },
	{ "ad4020", (kernel_ulong_t)&ad4020_chip_info },
	{ "ad4021", (kernel_ulong_t)&ad4021_chip_info },
	{ "ad4022", (kernel_ulong_t)&ad4022_chip_info },
	{ "adaq4001", (kernel_ulong_t)&adaq4001_chip_info },
	{ "adaq4003", (kernel_ulong_t)&adaq4003_chip_info },
	{ }
};
MODULE_DEVICE_TABLE(spi, ad4000_id);

static const struct of_device_id ad4000_of_match[] = {
	{ .compatible = "adi,ad4000", .data = &ad4000_chip_info },
	{ .compatible = "adi,ad4001", .data = &ad4001_chip_info },
	{ .compatible = "adi,ad4002", .data = &ad4002_chip_info },
	{ .compatible = "adi,ad4003", .data = &ad4003_chip_info },
	{ .compatible = "adi,ad4004", .data = &ad4004_chip_info },
	{ .compatible = "adi,ad4005", .data = &ad4005_chip_info },
	{ .compatible = "adi,ad4006", .data = &ad4006_chip_info },
	{ .compatible = "adi,ad4007", .data = &ad4007_chip_info },
	{ .compatible = "adi,ad4008", .data = &ad4008_chip_info },
	{ .compatible = "adi,ad4010", .data = &ad4010_chip_info },
	{ .compatible = "adi,ad4011", .data = &ad4011_chip_info },
	{ .compatible = "adi,ad4020", .data = &ad4020_chip_info },
	{ .compatible = "adi,ad4021", .data = &ad4021_chip_info },
	{ .compatible = "adi,ad4022", .data = &ad4022_chip_info },
	{ .compatible = "adi,adaq4001", .data = &adaq4001_chip_info },
	{ .compatible = "adi,adaq4003", .data = &adaq4003_chip_info },
	{ }
};
MODULE_DEVICE_TABLE(of, ad4000_of_match);

static struct spi_driver ad4000_driver = {
	.driver = {
		.name   = "ad4000",
		.of_match_table = ad4000_of_match,
	},
	.probe          = ad4000_probe,
	.id_table       = ad4000_id,
};
module_spi_driver(ad4000_driver);

MODULE_AUTHOR("Marcelo Schmitt <marcelo.schmitt@analog.com>");
MODULE_DESCRIPTION("Analog Devices AD4000 ADC driver");
MODULE_LICENSE("GPL");