Merge tag 'mips_6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Thomas Bogendoerfer:
"Just cleanups and fixes"
* tag 'mips_6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: vpe-mt: drop physical_memsize
mips: fix syscall_get_nr
MIPS: SMP-CPS: fix build error when HOTPLUG_CPU not set
MIPS: DTS: jz4780: add #clock-cells to rtc_dev
MIPS: dts: Boston: Fix dtc 'pci_device_reg' warning
mips: dts: ralink: mt7621: add port@5 as CPU port
mips: dts: align LED node names with dtschema
MIPS: ralink: Use devm_platform_get_and_ioremap_resource()
MIPS: pci-mt7620: Use devm_platform_get_and_ioremap_resource()
MIPS: pci: lantiq: Use devm_platform_get_and_ioremap_resource()
MIPS: lantiq: xway: Use devm_platform_get_and_ioremap_resource()
MIPS: BCM47XX: Add support for Linksys E2500 V3
mips: ralink: make SOC_MT7621 select PINCTRL_MT7621 and fix help section
MIPS: DTS: CI20: fix otg power gpio
MIPS: dts: lantiq: Remove bogus interrupt-parent; line
MIPS: Fix a compilation issue
MIPS: remove CONFIG_MIPS_LD_CAN_LINK_VDSO
mips: Realtek RTL: select NO_EXCEPT_FILL
MIPS: OCTEON: octeon-usb: Consolidate error messages
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 15cb692..37072e1 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -445,6 +445,7 @@
select IRQ_MIPS_CPU
select CEVT_R4K
select CSRC_R4K
+ select NO_EXCEPT_FILL
select SYS_HAS_CPU_MIPS32_R1
select SYS_HAS_CPU_MIPS32_R2
select SYS_SUPPORTS_BIG_ENDIAN
diff --git a/arch/mips/bcm47xx/board.c b/arch/mips/bcm47xx/board.c
index 8ef0024..90fb48b 100644
--- a/arch/mips/bcm47xx/board.c
+++ b/arch/mips/bcm47xx/board.c
@@ -130,6 +130,7 @@ struct bcm47xx_board_type_list2 bcm47xx_board_list_boot_hw[] __initconst = {
{{BCM47XX_BOARD_LINKSYS_E1000V21, "Linksys E1000 V2.1"}, "E1000", "2.1"},
{{BCM47XX_BOARD_LINKSYS_E1200V2, "Linksys E1200 V2"}, "E1200", "2.0"},
{{BCM47XX_BOARD_LINKSYS_E2000V1, "Linksys E2000 V1"}, "Linksys E2000", "1.0"},
+ {{BCM47XX_BOARD_LINKSYS_E2500V3, "Linksys E2500 V3"}, "E2500", "1.0"},
/* like WRT610N v2.0 */
{{BCM47XX_BOARD_LINKSYS_E3000V1, "Linksys E3000 V1"}, "E300", "1.0"},
{{BCM47XX_BOARD_LINKSYS_E3200V1, "Linksys E3200 V1"}, "E3200", "1.0"},
diff --git a/arch/mips/bcm47xx/buttons.c b/arch/mips/bcm47xx/buttons.c
index 38e4a9c..437a737 100644
--- a/arch/mips/bcm47xx/buttons.c
+++ b/arch/mips/bcm47xx/buttons.c
@@ -223,6 +223,12 @@ bcm47xx_buttons_linksys_e2000v1[] __initconst = {
};
static const struct gpio_keys_button
+bcm47xx_buttons_linksys_e2500v3[] __initconst = {
+ BCM47XX_GPIO_KEY(9, KEY_WPS_BUTTON),
+ BCM47XX_GPIO_KEY(10, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
bcm47xx_buttons_linksys_e3000v1[] __initconst = {
BCM47XX_GPIO_KEY(4, KEY_WPS_BUTTON),
BCM47XX_GPIO_KEY(6, KEY_RESTART),
@@ -617,6 +623,9 @@ int __init bcm47xx_buttons_register(void)
case BCM47XX_BOARD_LINKSYS_E2000V1:
err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_e2000v1);
break;
+ case BCM47XX_BOARD_LINKSYS_E2500V3:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_e2500v3);
+ break;
case BCM47XX_BOARD_LINKSYS_E3000V1:
err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_e3000v1);
break;
diff --git a/arch/mips/boot/dts/cavium-octeon/dlink_dsr-1000n.dts b/arch/mips/boot/dts/cavium-octeon/dlink_dsr-1000n.dts
index 2fdb4ba..cb460ea 100644
--- a/arch/mips/boot/dts/cavium-octeon/dlink_dsr-1000n.dts
+++ b/arch/mips/boot/dts/cavium-octeon/dlink_dsr-1000n.dts
@@ -20,27 +20,27 @@ uart0: serial@1180000000800 {
leds {
compatible = "gpio-leds";
- usb1 {
+ led-usb1 {
label = "usb1";
gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
};
- usb2 {
+ led-usb2 {
label = "usb2";
gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
};
- wps {
+ led-wps {
label = "wps";
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};
- wireless1 {
+ led-wireless1 {
label = "5g";
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
};
- wireless2 {
+ led-wireless2 {
label = "2.4g";
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
};
diff --git a/arch/mips/boot/dts/cavium-octeon/dlink_dsr-500n.dts b/arch/mips/boot/dts/cavium-octeon/dlink_dsr-500n.dts
index e042372..c55845f 100644
--- a/arch/mips/boot/dts/cavium-octeon/dlink_dsr-500n.dts
+++ b/arch/mips/boot/dts/cavium-octeon/dlink_dsr-500n.dts
@@ -21,15 +21,15 @@ uart0: serial@1180000000800 {
leds {
compatible = "gpio-leds";
- usb {
+ led-usb {
gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
};
- wps {
+ led-wps {
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};
- wireless {
+ led-wireless {
label = "2.4g";
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
};
diff --git a/arch/mips/boot/dts/img/boston.dts b/arch/mips/boot/dts/img/boston.dts
index 84328af..72f7605 100644
--- a/arch/mips/boot/dts/img/boston.dts
+++ b/arch/mips/boot/dts/img/boston.dts
@@ -125,7 +125,7 @@ pci2_intc: interrupt-controller {
#interrupt-cells = <1>;
};
- pci2_root@0,0,0 {
+ pci2_root@0,0 {
compatible = "pci10ee,7021";
reg = <0x00000000 0 0 0 0>;
diff --git a/arch/mips/boot/dts/ingenic/ci20.dts b/arch/mips/boot/dts/ingenic/ci20.dts
index f38c395..239c453 100644
--- a/arch/mips/boot/dts/ingenic/ci20.dts
+++ b/arch/mips/boot/dts/ingenic/ci20.dts
@@ -42,25 +42,25 @@ switch {
leds {
compatible = "gpio-leds";
- led0 {
+ led-0 {
label = "ci20:red:led0";
gpios = <&gpc 3 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "none";
};
- led1 {
+ led-1 {
label = "ci20:red:led1";
gpios = <&gpc 2 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "nand-disk";
};
- led2 {
+ led-2 {
label = "ci20:red:led2";
gpios = <&gpc 1 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "cpu1";
};
- led3 {
+ led-3 {
label = "ci20:red:led3";
gpios = <&gpc 0 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "cpu0";
@@ -113,7 +113,7 @@ otg_power: fixedregulator@2 {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpf 14 GPIO_ACTIVE_LOW>;
+ gpio = <&gpf 15 GPIO_ACTIVE_LOW>;
enable-active-high;
};
};
diff --git a/arch/mips/boot/dts/ingenic/jz4780.dtsi b/arch/mips/boot/dts/ingenic/jz4780.dtsi
index c182a65..18affff 100644
--- a/arch/mips/boot/dts/ingenic/jz4780.dtsi
+++ b/arch/mips/boot/dts/ingenic/jz4780.dtsi
@@ -155,6 +155,8 @@ rtc_dev: rtc@10003000 {
clocks = <&cgu JZ4780_CLK_RTCLK>;
clock-names = "rtc";
+
+ #clock-cells = <0>;
};
pinctrl: pin-controller@10010000 {
diff --git a/arch/mips/boot/dts/lantiq/danube.dtsi b/arch/mips/boot/dts/lantiq/danube.dtsi
index 510be63..7a7ba66 100644
--- a/arch/mips/boot/dts/lantiq/danube.dtsi
+++ b/arch/mips/boot/dts/lantiq/danube.dtsi
@@ -40,7 +40,6 @@ sram@1f000000 {
eiu0: eiu@101000 {
#interrupt-cells = <1>;
interrupt-controller;
- interrupt-parent;
compatible = "lantiq,eiu-xway";
reg = <0x101000 0x1000>;
};
diff --git a/arch/mips/boot/dts/pic32/pic32mzda_sk.dts b/arch/mips/boot/dts/pic32/pic32mzda_sk.dts
index ab70637..b1c5ffd 100644
--- a/arch/mips/boot/dts/pic32/pic32mzda_sk.dts
+++ b/arch/mips/boot/dts/pic32/pic32mzda_sk.dts
@@ -28,19 +28,19 @@ leds0 {
pinctrl-names = "default";
pinctrl-0 = <&user_leds_s0>;
- led@1 {
+ led-1 {
label = "pic32mzda_sk:red:led1";
gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
- led@2 {
+ led-2 {
label = "pic32mzda_sk:yellow:led2";
gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "mmc0";
};
- led@3 {
+ led-3 {
label = "pic32mzda_sk:green:led3";
gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>;
default-state = "on";
diff --git a/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts b/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts
index f3dff40..f894fe1 100644
--- a/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts
+++ b/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts
@@ -41,23 +41,23 @@ button-1 {
leds {
compatible = "gpio-leds";
- led@0 {
+ led-0 {
label = "tp-link:green:usb";
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
};
- led@1 {
+ led-1 {
label = "tp-link:green:system";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
linux,default-trigger = "heartbeat";
};
- led@2 {
+ led-2 {
label = "tp-link:green:qss";
gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
};
- led@3 {
+ led-3 {
label = "tp-link:green:wlan";
gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
};
diff --git a/arch/mips/boot/dts/qca/ar9331_dragino_ms14.dts b/arch/mips/boot/dts/qca/ar9331_dragino_ms14.dts
index 40e4c5d..7affa58 100644
--- a/arch/mips/boot/dts/qca/ar9331_dragino_ms14.dts
+++ b/arch/mips/boot/dts/qca/ar9331_dragino_ms14.dts
@@ -22,25 +22,25 @@ memory@0 {
leds {
compatible = "gpio-leds";
- wlan {
+ led-wlan {
label = "dragino2:red:wlan";
gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- lan {
+ led-lan {
label = "dragino2:red:lan";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
default-state = "off";
};
- wan {
+ led-wan {
label = "dragino2:red:wan";
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
default-state = "off";
};
- system {
+ led-system {
label = "dragino2:red:system";
gpios = <&gpio 28 GPIO_ACTIVE_HIGH>;
default-state = "off";
diff --git a/arch/mips/boot/dts/qca/ar9331_omega.dts b/arch/mips/boot/dts/qca/ar9331_omega.dts
index ed184d8..8904aa9 100644
--- a/arch/mips/boot/dts/qca/ar9331_omega.dts
+++ b/arch/mips/boot/dts/qca/ar9331_omega.dts
@@ -22,7 +22,7 @@ memory@0 {
leds {
compatible = "gpio-leds";
- system {
+ led-system {
label = "onion:amber:system";
gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
default-state = "off";
diff --git a/arch/mips/boot/dts/qca/ar9331_tl_mr3020.dts b/arch/mips/boot/dts/qca/ar9331_tl_mr3020.dts
index 5f424c2..10b9759 100644
--- a/arch/mips/boot/dts/qca/ar9331_tl_mr3020.dts
+++ b/arch/mips/boot/dts/qca/ar9331_tl_mr3020.dts
@@ -22,25 +22,25 @@ memory@0 {
leds {
compatible = "gpio-leds";
- wlan {
+ led-wlan {
label = "tp-link:green:wlan";
gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- lan {
+ led-lan {
label = "tp-link:green:lan";
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
default-state = "off";
};
- wps {
+ led-wps {
label = "tp-link:green:wps";
gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
default-state = "off";
};
- led3g {
+ led-led3g {
label = "tp-link:green:3g";
gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
default-state = "off";
diff --git a/arch/mips/boot/dts/ralink/gardena_smart_gateway_mt7688.dts b/arch/mips/boot/dts/ralink/gardena_smart_gateway_mt7688.dts
index 1795581..18107ca 100644
--- a/arch/mips/boot/dts/ralink/gardena_smart_gateway_mt7688.dts
+++ b/arch/mips/boot/dts/ralink/gardena_smart_gateway_mt7688.dts
@@ -47,67 +47,67 @@ leds {
* (see below). So we can't include it in this LED node.
*/
- power_blue {
+ led-power-blue {
label = "smartgw:power:blue";
gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- power_green {
+ led-power-green {
label = "smartgw:power:green";
gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- power_red {
+ led-power-red {
label = "smartgw:power:red";
gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- radio_blue {
+ led-radio-blue {
label = "smartgw:radio:blue";
gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- radio_green {
+ led-radio-green {
label = "smartgw:radio:green";
gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- radio_red {
+ led-radio-red {
label = "smartgw:radio:red";
gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- internet_blue {
+ led-internet-blue {
label = "smartgw:internet:blue";
gpios = <&gpio 26 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- internet_green {
+ led-internet-green {
label = "smartgw:internet:green";
gpios = <&gpio 27 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- internet_red {
+ led-internet-red {
label = "smartgw:internet:red";
gpios = <&gpio 28 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- ethernet_link {
+ led-ethernet-link {
label = "smartgw:eth:link";
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
linux,default-trigger = "netdev";
};
- ethernet_activity {
+ led-ethernet-activity {
label = "smartgw:eth:act";
gpios = <&gpio 43 GPIO_ACTIVE_LOW>;
linux,default-trigger = "netdev";
diff --git a/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc1.dts b/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc1.dts
index 0128bd8..129b671 100644
--- a/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc1.dts
+++ b/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc1.dts
@@ -33,13 +33,13 @@ key-reset {
gpio-leds {
compatible = "gpio-leds";
- power {
+ led-power {
label = "green:power";
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
linux,default-trigger = "default-on";
};
- system {
+ led-system {
label = "green:system";
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
linux,default-trigger = "disk-activity";
@@ -91,22 +91,16 @@ &pcie {
status = "okay";
};
-&gmac1 {
- status = "okay";
- phy-handle = <ðphy4>;
-};
-
-&mdio {
- ethphy4: ethernet-phy@4 {
- reg = <4>;
- };
-};
-
&switch0 {
ports {
port@0 {
status = "okay";
label = "ethblack";
};
+
+ port@4 {
+ status = "okay";
+ label = "ethblue";
+ };
};
};
diff --git a/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc2.dts b/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc2.dts
index e314175..f810cd1 100644
--- a/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc2.dts
+++ b/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc2.dts
@@ -33,33 +33,33 @@ key-reset {
gpio-leds {
compatible = "gpio-leds";
- ethblack-green {
+ led-ethblack-green {
label = "green:ethblack";
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
};
- ethblue-green {
+ led-ethblue-green {
label = "green:ethblue";
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
};
- ethyellow-green {
+ led-ethyellow-green {
label = "green:ethyellow";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
- ethyellow-orange {
+ led-ethyellow-orange {
label = "orange:ethyellow";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
- power {
+ led-power {
label = "green:power";
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
linux,default-trigger = "default-on";
};
- system {
+ led-system {
label = "green:system";
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
linux,default-trigger = "disk-activity";
@@ -112,9 +112,12 @@ &pcie {
};
&gmac1 {
- status = "okay";
phy-mode = "rgmii-rxid";
phy-handle = <ðphy5>;
+
+ fixed-link {
+ status = "disabled";
+ };
};
&mdio {
@@ -134,5 +137,9 @@ port@4 {
status = "okay";
label = "ethblue";
};
+
+ port@5 {
+ status = "disabled";
+ };
};
};
diff --git a/arch/mips/boot/dts/ralink/mt7621.dtsi b/arch/mips/boot/dts/ralink/mt7621.dtsi
index aec85c7..290d47f 100644
--- a/arch/mips/boot/dts/ralink/mt7621.dtsi
+++ b/arch/mips/boot/dts/ralink/mt7621.dtsi
@@ -332,8 +332,13 @@ fixed-link {
gmac1: mac@1 {
compatible = "mediatek,eth-mac";
reg = <1>;
- status = "disabled";
phy-mode = "rgmii";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ pause;
+ };
};
mdio: mdio-bus {
@@ -384,6 +389,18 @@ port@4 {
label = "swp4";
};
+ port@5 {
+ reg = <5>;
+ ethernet = <&gmac1>;
+ phy-mode = "rgmii";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ pause;
+ };
+ };
+
port@6 {
reg = <6>;
ethernet = <&gmac0>;
diff --git a/arch/mips/cavium-octeon/octeon-usb.c b/arch/mips/cavium-octeon/octeon-usb.c
index 5cffe1e..28677c6 100644
--- a/arch/mips/cavium-octeon/octeon-usb.c
+++ b/arch/mips/cavium-octeon/octeon-usb.c
@@ -245,7 +245,7 @@ static int dwc3_octeon_config_power(struct device *dev, u64 base)
power_active_low = 0;
gpio = gpio_pwr[1];
} else {
- dev_err(dev, "dwc3 controller clock init failure.\n");
+ dev_err(dev, "invalid power configuration\n");
return -EINVAL;
}
if ((OCTEON_IS_MODEL(OCTEON_CN73XX) ||
@@ -278,7 +278,7 @@ static int dwc3_octeon_config_power(struct device *dev, u64 base)
uctl_host_cfg.s.ppc_en = 0;
uctl_host_cfg.s.ppc_active_high_en = 0;
cvmx_write_csr(base + UCTL_HOST_CFG, uctl_host_cfg.u64);
- dev_warn(dev, "dwc3 controller clock init failure.\n");
+ dev_info(dev, "power control disabled\n");
}
return 0;
}
@@ -301,19 +301,19 @@ static int dwc3_octeon_clocks_start(struct device *dev, u64 base)
i = of_property_read_u32(dev->of_node,
"refclk-frequency", &clock_rate);
if (i) {
- pr_err("No UCTL \"refclk-frequency\"\n");
+ dev_err(dev, "No UCTL \"refclk-frequency\"\n");
return -EINVAL;
}
i = of_property_read_string(dev->of_node,
"refclk-type-ss", &ss_clock_type);
if (i) {
- pr_err("No UCTL \"refclk-type-ss\"\n");
+ dev_err(dev, "No UCTL \"refclk-type-ss\"\n");
return -EINVAL;
}
i = of_property_read_string(dev->of_node,
"refclk-type-hs", &hs_clock_type);
if (i) {
- pr_err("No UCTL \"refclk-type-hs\"\n");
+ dev_err(dev, "No UCTL \"refclk-type-hs\"\n");
return -EINVAL;
}
if (strcmp("dlmc_ref_clk0", ss_clock_type) == 0) {
@@ -322,29 +322,29 @@ static int dwc3_octeon_clocks_start(struct device *dev, u64 base)
else if (strcmp(hs_clock_type, "pll_ref_clk") == 0)
ref_clk_sel = 2;
else
- pr_err("Invalid HS clock type %s, using pll_ref_clk instead\n",
- hs_clock_type);
+ dev_warn(dev, "Invalid HS clock type %s, using pll_ref_clk instead\n",
+ hs_clock_type);
} else if (strcmp(ss_clock_type, "dlmc_ref_clk1") == 0) {
if (strcmp(hs_clock_type, "dlmc_ref_clk1") == 0)
ref_clk_sel = 1;
else if (strcmp(hs_clock_type, "pll_ref_clk") == 0)
ref_clk_sel = 3;
else {
- pr_err("Invalid HS clock type %s, using pll_ref_clk instead\n",
- hs_clock_type);
+ dev_warn(dev, "Invalid HS clock type %s, using pll_ref_clk instead\n",
+ hs_clock_type);
ref_clk_sel = 3;
}
} else
- pr_err("Invalid SS clock type %s, using dlmc_ref_clk0 instead\n",
- ss_clock_type);
+ dev_warn(dev, "Invalid SS clock type %s, using dlmc_ref_clk0 instead\n",
+ ss_clock_type);
if ((ref_clk_sel == 0 || ref_clk_sel == 1) &&
- (clock_rate != 100000000))
- pr_err("Invalid UCTL clock rate of %u, using 100000000 instead\n",
- clock_rate);
+ (clock_rate != 100000000))
+ dev_warn(dev, "Invalid UCTL clock rate of %u, using 100000000 instead\n",
+ clock_rate);
} else {
- pr_err("No USB UCTL device node\n");
+ dev_err(dev, "No USB UCTL device node\n");
return -EINVAL;
}
@@ -396,8 +396,8 @@ static int dwc3_octeon_clocks_start(struct device *dev, u64 base)
uctl_ctl.s.ref_clk_div2 = 0;
switch (clock_rate) {
default:
- dev_err(dev, "Invalid ref_clk %u, using 100000000 instead\n",
- clock_rate);
+ dev_warn(dev, "Invalid ref_clk %u, using 100000000 instead\n",
+ clock_rate);
fallthrough;
case 100000000:
mpll_mul = 0x19;
@@ -438,10 +438,8 @@ static int dwc3_octeon_clocks_start(struct device *dev, u64 base)
udelay(10);
/* Steo 8c: Setup power-power control. */
- if (dwc3_octeon_config_power(dev, base)) {
- dev_err(dev, "Error configuring power.\n");
+ if (dwc3_octeon_config_power(dev, base))
return -EINVAL;
- }
/* Step 8d: Deassert UAHC reset signal. */
uctl_ctl.u64 = cvmx_read_csr(uctl_ctl_reg);
@@ -529,10 +527,10 @@ static int __init dwc3_octeon_device_init(void)
}
mutex_lock(&dwc3_octeon_clocks_mutex);
- dwc3_octeon_clocks_start(&pdev->dev, (u64)base);
+ if (dwc3_octeon_clocks_start(&pdev->dev, (u64)base) == 0)
+ dev_info(&pdev->dev, "clocks initialized.\n");
dwc3_octeon_set_endian_mode((u64)base);
dwc3_octeon_phy_reset((u64)base);
- dev_info(&pdev->dev, "clocks initialized.\n");
mutex_unlock(&dwc3_octeon_clocks_mutex);
devm_iounmap(&pdev->dev, base);
devm_release_mem_region(&pdev->dev, res->start,
diff --git a/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
index 30f4114..3c401f1 100644
--- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
@@ -61,6 +61,7 @@ enum bcm47xx_board {
BCM47XX_BOARD_LINKSYS_E1000V21,
BCM47XX_BOARD_LINKSYS_E1200V2,
BCM47XX_BOARD_LINKSYS_E2000V1,
+ BCM47XX_BOARD_LINKSYS_E2500V3,
BCM47XX_BOARD_LINKSYS_E3000V1,
BCM47XX_BOARD_LINKSYS_E3200V1,
BCM47XX_BOARD_LINKSYS_E4200V1,
diff --git a/arch/mips/include/asm/mach-rc32434/pci.h b/arch/mips/include/asm/mach-rc32434/pci.h
index 9a6eefd..3eb767c 100644
--- a/arch/mips/include/asm/mach-rc32434/pci.h
+++ b/arch/mips/include/asm/mach-rc32434/pci.h
@@ -374,7 +374,7 @@ struct pci_msu {
PCI_CFG04_STAT_SSE | \
PCI_CFG04_STAT_PE)
-#define KORINA_CNFG1 ((KORINA_STAT<<16)|KORINA_CMD)
+#define KORINA_CNFG1 (KORINA_STAT | KORINA_CMD)
#define KORINA_REVID 0
#define KORINA_CLASS_CODE 0
diff --git a/arch/mips/include/asm/syscall.h b/arch/mips/include/asm/syscall.h
index 25fa651..ebdf4d9 100644
--- a/arch/mips/include/asm/syscall.h
+++ b/arch/mips/include/asm/syscall.h
@@ -38,7 +38,7 @@ static inline bool mips_syscall_is_indirect(struct task_struct *task,
static inline long syscall_get_nr(struct task_struct *task,
struct pt_regs *regs)
{
- return current_thread_info()->syscall;
+ return task_thread_info(task)->syscall;
}
static inline void mips_syscall_update_nr(struct task_struct *task,
diff --git a/arch/mips/include/asm/vpe.h b/arch/mips/include/asm/vpe.h
index baa949a..ef7e078 100644
--- a/arch/mips/include/asm/vpe.h
+++ b/arch/mips/include/asm/vpe.h
@@ -102,7 +102,6 @@ struct vpe_control {
struct list_head tc_list; /* Thread contexts */
};
-extern unsigned long physical_memsize;
extern struct vpe_control vpecontrol;
extern const struct file_operations vpe_fops;
diff --git a/arch/mips/kernel/smp-cps.c b/arch/mips/kernel/smp-cps.c
index bcd6a94..f2df0ca 100644
--- a/arch/mips/kernel/smp-cps.c
+++ b/arch/mips/kernel/smp-cps.c
@@ -424,9 +424,11 @@ static void cps_shutdown_this_cpu(enum cpu_death death)
wmb();
}
} else {
- pr_debug("Gating power to core %d\n", core);
- /* Power down the core */
- cps_pm_enter_state(CPS_PM_POWER_GATED);
+ if (IS_ENABLED(CONFIG_HOTPLUG_CPU)) {
+ pr_debug("Gating power to core %d\n", core);
+ /* Power down the core */
+ cps_pm_enter_state(CPS_PM_POWER_GATED);
+ }
}
}
diff --git a/arch/mips/kernel/vpe-mt.c b/arch/mips/kernel/vpe-mt.c
index 84a82b5..223d627 100644
--- a/arch/mips/kernel/vpe-mt.c
+++ b/arch/mips/kernel/vpe-mt.c
@@ -92,12 +92,11 @@ int vpe_run(struct vpe *v)
write_tc_c0_tchalt(read_tc_c0_tchalt() & ~TCHALT_H);
/*
- * The sde-kit passes 'memsize' to __start in $a3, so set something
- * here... Or set $a3 to zero and define DFLT_STACK_SIZE and
- * DFLT_HEAP_SIZE when you compile your program
+ * We don't pass the memsize here, so VPE programs need to be
+ * compiled with DFLT_STACK_SIZE and DFLT_HEAP_SIZE defined.
*/
+ mttgpr(7, 0);
mttgpr(6, v->ntcs);
- mttgpr(7, physical_memsize);
/* set up VPE1 */
/*
diff --git a/arch/mips/lantiq/prom.c b/arch/mips/lantiq/prom.c
index be4829c..a3cf293 100644
--- a/arch/mips/lantiq/prom.c
+++ b/arch/mips/lantiq/prom.c
@@ -23,12 +23,6 @@ DEFINE_SPINLOCK(ebu_lock);
EXPORT_SYMBOL_GPL(ebu_lock);
/*
- * This is needed by the VPE loader code, just set it to 0 and assume
- * that the firmware hardcodes this value to something useful.
- */
-unsigned long physical_memsize = 0L;
-
-/*
* this struct is filled by the soc specific detection code and holds
* information about the specific soc type, revision and name
*/
diff --git a/arch/mips/lantiq/xway/dcdc.c b/arch/mips/lantiq/xway/dcdc.c
index 4960bee..9619996 100644
--- a/arch/mips/lantiq/xway/dcdc.c
+++ b/arch/mips/lantiq/xway/dcdc.c
@@ -22,10 +22,7 @@ static void __iomem *dcdc_membase;
static int dcdc_probe(struct platform_device *pdev)
{
- struct resource *res;
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- dcdc_membase = devm_ioremap_resource(&pdev->dev, res);
+ dcdc_membase = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
if (IS_ERR(dcdc_membase))
return PTR_ERR(dcdc_membase);
diff --git a/arch/mips/lantiq/xway/dma.c b/arch/mips/lantiq/xway/dma.c
index f8eedeb..934ac72 100644
--- a/arch/mips/lantiq/xway/dma.c
+++ b/arch/mips/lantiq/xway/dma.c
@@ -239,12 +239,10 @@ static int
ltq_dma_init(struct platform_device *pdev)
{
struct clk *clk;
- struct resource *res;
unsigned int id, nchannels;
int i;
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- ltq_dma_membase = devm_ioremap_resource(&pdev->dev, res);
+ ltq_dma_membase = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
if (IS_ERR(ltq_dma_membase))
panic("Failed to remap dma resource");
diff --git a/arch/mips/lantiq/xway/gptu.c b/arch/mips/lantiq/xway/gptu.c
index 200fe9f..a492b1e 100644
--- a/arch/mips/lantiq/xway/gptu.c
+++ b/arch/mips/lantiq/xway/gptu.c
@@ -136,17 +136,14 @@ static inline void clkdev_add_gptu(struct device *dev, const char *con,
static int gptu_probe(struct platform_device *pdev)
{
struct clk *clk;
- struct resource *res;
if (of_irq_to_resource_table(pdev->dev.of_node, irqres, 6) != 6) {
dev_err(&pdev->dev, "Failed to get IRQ list\n");
return -EINVAL;
}
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-
/* remap gptu register range */
- gptu_membase = devm_ioremap_resource(&pdev->dev, res);
+ gptu_membase = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
if (IS_ERR(gptu_membase))
return PTR_ERR(gptu_membase);
diff --git a/arch/mips/pci/pci-lantiq.c b/arch/mips/pci/pci-lantiq.c
index 8d16cd0..d967e4c 100644
--- a/arch/mips/pci/pci-lantiq.c
+++ b/arch/mips/pci/pci-lantiq.c
@@ -204,17 +204,13 @@ static int ltq_pci_startup(struct platform_device *pdev)
static int ltq_pci_probe(struct platform_device *pdev)
{
- struct resource *res_cfg, *res_bridge;
-
pci_clear_flags(PCI_PROBE_ONLY);
- res_bridge = platform_get_resource(pdev, IORESOURCE_MEM, 1);
- ltq_pci_membase = devm_ioremap_resource(&pdev->dev, res_bridge);
+ ltq_pci_membase = devm_platform_get_and_ioremap_resource(pdev, 1, NULL);
if (IS_ERR(ltq_pci_membase))
return PTR_ERR(ltq_pci_membase);
- res_cfg = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- ltq_pci_mapped_cfg = devm_ioremap_resource(&pdev->dev, res_cfg);
+ ltq_pci_mapped_cfg = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
if (IS_ERR(ltq_pci_mapped_cfg))
return PTR_ERR(ltq_pci_mapped_cfg);
diff --git a/arch/mips/pci/pci-mt7620.c b/arch/mips/pci/pci-mt7620.c
index e032932..2700d75 100644
--- a/arch/mips/pci/pci-mt7620.c
+++ b/arch/mips/pci/pci-mt7620.c
@@ -282,21 +282,17 @@ static int mt7628_pci_hw_init(struct platform_device *pdev)
static int mt7620_pci_probe(struct platform_device *pdev)
{
- struct resource *bridge_res = platform_get_resource(pdev,
- IORESOURCE_MEM, 0);
- struct resource *pcie_res = platform_get_resource(pdev,
- IORESOURCE_MEM, 1);
u32 val = 0;
rstpcie0 = devm_reset_control_get_exclusive(&pdev->dev, "pcie0");
if (IS_ERR(rstpcie0))
return PTR_ERR(rstpcie0);
- bridge_base = devm_ioremap_resource(&pdev->dev, bridge_res);
+ bridge_base = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
if (IS_ERR(bridge_base))
return PTR_ERR(bridge_base);
- pcie_base = devm_ioremap_resource(&pdev->dev, pcie_res);
+ pcie_base = devm_platform_get_and_ioremap_resource(pdev, 1, NULL);
if (IS_ERR(pcie_base))
return PTR_ERR(pcie_base);
diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
index f9fe156..0603179 100644
--- a/arch/mips/ralink/Kconfig
+++ b/arch/mips/ralink/Kconfig
@@ -54,10 +54,11 @@
select HAVE_PCI
select PCI_DRIVERS_GENERIC
select SOC_BUS
+ select PINCTRL_MT7621
help
- The MT7621 system-on-a-chip includes an 880 MHz MIPS1004Kc dual-core CPU,
- a 5-port 10/100/1000 switch/PHY and one RGMII.
+ The MT7621 system-on-a-chip includes an 880 MHz MIPS1004Kc
+ dual-core CPU, a 5-port 10/100/1000 switch/PHY and one RGMII.
endchoice
choice
diff --git a/arch/mips/ralink/timer.c b/arch/mips/ralink/timer.c
index 652424d..fc50367 100644
--- a/arch/mips/ralink/timer.c
+++ b/arch/mips/ralink/timer.c
@@ -95,7 +95,6 @@ static int rt_timer_enable(struct rt_timer *rt)
static int rt_timer_probe(struct platform_device *pdev)
{
- struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
struct rt_timer *rt;
struct clk *clk;
@@ -109,7 +108,7 @@ static int rt_timer_probe(struct platform_device *pdev)
if (rt->irq < 0)
return rt->irq;
- rt->membase = devm_ioremap_resource(&pdev->dev, res);
+ rt->membase = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
if (IS_ERR(rt->membase))
return PTR_ERR(rt->membase);
diff --git a/arch/mips/vdso/Kconfig b/arch/mips/vdso/Kconfig
index a665f61..7014024 100644
--- a/arch/mips/vdso/Kconfig
+++ b/arch/mips/vdso/Kconfig
@@ -1,18 +1,6 @@
-# For the pre-R6 code in arch/mips/vdso/vdso.h for locating
-# the base address of VDSO, the linker will emit a R_MIPS_PC32
-# relocation in binutils > 2.25 but it will fail with older versions
-# because that relocation is not supported for that symbol. As a result
-# of which we are forced to disable the VDSO symbols when building
-# with < 2.25 binutils on pre-R6 kernels. For more references on why we
-# can't use other methods to get the base address of VDSO please refer to
-# the comments on that file.
-#
# GCC (at least up to version 9.2) appears to emit function calls that make use
# of the GOT when targeting microMIPS, which we can't use in the VDSO due to
# the lack of relocations. As such, we disable the VDSO for microMIPS builds.
-config MIPS_LD_CAN_LINK_VDSO
- def_bool LD_VERSION >= 22500 || LD_IS_LLD
-
config MIPS_DISABLE_VDSO
- def_bool CPU_MICROMIPS || (!CPU_MIPSR6 && !MIPS_LD_CAN_LINK_VDSO)
+ def_bool CPU_MICROMIPS
diff --git a/arch/mips/vdso/Makefile b/arch/mips/vdso/Makefile
index 1f7d5c6..18af947 100644
--- a/arch/mips/vdso/Makefile
+++ b/arch/mips/vdso/Makefile
@@ -52,9 +52,6 @@
CFLAGS_REMOVE_vgettimeofday.o = $(CC_FLAGS_FTRACE)
ifdef CONFIG_MIPS_DISABLE_VDSO
- ifndef CONFIG_MIPS_LD_CAN_LINK_VDSO
- $(warning MIPS VDSO requires binutils >= 2.25)
- endif
obj-vdso-y := $(filter-out vgettimeofday.o, $(obj-vdso-y))
endif
