[POWERPC] Rename device_is_compatible to of_device_is_compatible
for consistency with other Open Firmware interfaces (and Sparc).
This is just a straight replacement.
This leaves the compatibility define in place.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
diff --git a/drivers/char/hvc_iseries.c b/drivers/char/hvc_iseries.c
index ec420fe..b37f1d5 100644
--- a/drivers/char/hvc_iseries.c
+++ b/drivers/char/hvc_iseries.c
@@ -579,7 +579,7 @@
if (!vtermno)
continue;
- if (!device_is_compatible(vty, "IBM,iSeries-vty"))
+ if (!of_device_is_compatible(vty, "IBM,iSeries-vty"))
continue;
if (num_found == 0)
diff --git a/drivers/char/hvc_vio.c b/drivers/char/hvc_vio.c
index 94a542e..79711aa 100644
--- a/drivers/char/hvc_vio.c
+++ b/drivers/char/hvc_vio.c
@@ -157,7 +157,7 @@
if (!vtermno)
continue;
- if (device_is_compatible(vty, "hvterm1")) {
+ if (of_device_is_compatible(vty, "hvterm1")) {
hvc_instantiate(*vtermno, num_found, &hvc_get_put_ops);
++num_found;
}
diff --git a/drivers/char/tpm/tpm_atmel.h b/drivers/char/tpm/tpm_atmel.h
index 377bc60..c912d86 100644
--- a/drivers/char/tpm/tpm_atmel.h
+++ b/drivers/char/tpm/tpm_atmel.h
@@ -47,7 +47,7 @@
if (!dn)
return NULL;
- if (!device_is_compatible(dn, "AT97SC3201")) {
+ if (!of_device_is_compatible(dn, "AT97SC3201")) {
of_node_put(dn);
return NULL;
}
diff --git a/drivers/hwmon/ams/ams-core.c b/drivers/hwmon/ams/ams-core.c
index 93b963f..dbe6a32 100644
--- a/drivers/hwmon/ams/ams-core.c
+++ b/drivers/hwmon/ams/ams-core.c
@@ -208,14 +208,14 @@
#ifdef CONFIG_SENSORS_AMS_I2C
np = of_find_node_by_name(NULL, "accelerometer");
- if (np && device_is_compatible(np, "AAPL,accelerometer_1"))
+ if (np && of_device_is_compatible(np, "AAPL,accelerometer_1"))
/* Found I2C motion sensor */
return ams_i2c_init(np);
#endif
#ifdef CONFIG_SENSORS_AMS_PMU
np = of_find_node_by_name(NULL, "sms");
- if (np && device_is_compatible(np, "sms"))
+ if (np && of_device_is_compatible(np, "sms"))
/* Found PMU motion sensor */
return ams_pmu_init(np);
#endif
diff --git a/drivers/ide/pci/pdc202xx_new.c b/drivers/ide/pci/pdc202xx_new.c
index ace9892..ae20fb3 100644
--- a/drivers/ide/pci/pdc202xx_new.c
+++ b/drivers/ide/pci/pdc202xx_new.c
@@ -398,7 +398,7 @@
unsigned int class_rev = 0;
u8 conf;
- if (np == NULL || !device_is_compatible(np, "kiwi-root"))
+ if (np == NULL || !of_device_is_compatible(np, "kiwi-root"))
return;
pci_read_config_dword(pdev, PCI_CLASS_REVISION, &class_rev);
diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c
index 774bfd3..a49ebe4 100644
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -1157,18 +1157,18 @@
pmif->cable_80 = 0;
pmif->broken_dma = pmif->broken_dma_warn = 0;
- if (device_is_compatible(np, "shasta-ata"))
+ if (of_device_is_compatible(np, "shasta-ata"))
pmif->kind = controller_sh_ata6;
- else if (device_is_compatible(np, "kauai-ata"))
+ else if (of_device_is_compatible(np, "kauai-ata"))
pmif->kind = controller_un_ata6;
- else if (device_is_compatible(np, "K2-UATA"))
+ else if (of_device_is_compatible(np, "K2-UATA"))
pmif->kind = controller_k2_ata6;
- else if (device_is_compatible(np, "keylargo-ata")) {
+ else if (of_device_is_compatible(np, "keylargo-ata")) {
if (strcmp(np->name, "ata-4") == 0)
pmif->kind = controller_kl_ata4;
else
pmif->kind = controller_kl_ata3;
- } else if (device_is_compatible(np, "heathrow-ata"))
+ } else if (of_device_is_compatible(np, "heathrow-ata"))
pmif->kind = controller_heathrow;
else {
pmif->kind = controller_ohare;
@@ -1190,8 +1190,8 @@
* they have a 80 conductor cable, this seem to be always the case unless
* the user mucked around
*/
- if (device_is_compatible(np, "K2-UATA") ||
- device_is_compatible(np, "shasta-ata"))
+ if (of_device_is_compatible(np, "K2-UATA") ||
+ of_device_is_compatible(np, "shasta-ata"))
pmif->cable_80 = 1;
/* On Kauai-type controllers, we make sure the FCR is correct */
diff --git a/drivers/macintosh/smu.c b/drivers/macintosh/smu.c
index a98a328..f8e1a13 100644
--- a/drivers/macintosh/smu.c
+++ b/drivers/macintosh/smu.c
@@ -606,7 +606,7 @@
struct device_node *np;
for (np = NULL; (np = of_get_next_child(smu->of_node, np)) != NULL;)
- if (device_is_compatible(np, "smu-sensors"))
+ if (of_device_is_compatible(np, "smu-sensors"))
of_platform_device_create(np, "smu-sensors",
&smu->of_dev->dev);
}
diff --git a/drivers/macintosh/therm_adt746x.c b/drivers/macintosh/therm_adt746x.c
index 2289034..178afa1 100644
--- a/drivers/macintosh/therm_adt746x.c
+++ b/drivers/macintosh/therm_adt746x.c
@@ -560,9 +560,9 @@
np = of_find_node_by_name(NULL, "fan");
if (!np)
return -ENODEV;
- if (device_is_compatible(np, "adt7460"))
+ if (of_device_is_compatible(np, "adt7460"))
therm_type = ADT7460;
- else if (device_is_compatible(np, "adt7467"))
+ else if (of_device_is_compatible(np, "adt7467"))
therm_type = ADT7467;
else
return -ENODEV;
diff --git a/drivers/macintosh/via-pmu.c b/drivers/macintosh/via-pmu.c
index 1729d3f..0707624 100644
--- a/drivers/macintosh/via-pmu.c
+++ b/drivers/macintosh/via-pmu.c
@@ -310,14 +310,14 @@
PMU_INT_TICK;
if (vias->parent->name && ((strcmp(vias->parent->name, "ohare") == 0)
- || device_is_compatible(vias->parent, "ohare")))
+ || of_device_is_compatible(vias->parent, "ohare")))
pmu_kind = PMU_OHARE_BASED;
- else if (device_is_compatible(vias->parent, "paddington"))
+ else if (of_device_is_compatible(vias->parent, "paddington"))
pmu_kind = PMU_PADDINGTON_BASED;
- else if (device_is_compatible(vias->parent, "heathrow"))
+ else if (of_device_is_compatible(vias->parent, "heathrow"))
pmu_kind = PMU_HEATHROW_BASED;
- else if (device_is_compatible(vias->parent, "Keylargo")
- || device_is_compatible(vias->parent, "K2-Keylargo")) {
+ else if (of_device_is_compatible(vias->parent, "Keylargo")
+ || of_device_is_compatible(vias->parent, "K2-Keylargo")) {
struct device_node *gpiop;
struct device_node *adbp;
u64 gaddr = OF_BAD_ADDR;
diff --git a/drivers/macintosh/windfarm_lm75_sensor.c b/drivers/macintosh/windfarm_lm75_sensor.c
index ab4d1b6..a0fabf3 100644
--- a/drivers/macintosh/windfarm_lm75_sensor.c
+++ b/drivers/macintosh/windfarm_lm75_sensor.c
@@ -188,10 +188,10 @@
if (loc == NULL || addr == 0)
continue;
/* real lm75 */
- if (device_is_compatible(dev, "lm75"))
+ if (of_device_is_compatible(dev, "lm75"))
wf_lm75_create(adapter, addr, 0, loc);
/* ds1775 (compatible, better resolution */
- else if (device_is_compatible(dev, "ds1775"))
+ else if (of_device_is_compatible(dev, "ds1775"))
wf_lm75_create(adapter, addr, 1, loc);
}
return 0;
diff --git a/drivers/macintosh/windfarm_max6690_sensor.c b/drivers/macintosh/windfarm_max6690_sensor.c
index eaa74af..5f03aab 100644
--- a/drivers/macintosh/windfarm_max6690_sensor.c
+++ b/drivers/macintosh/windfarm_max6690_sensor.c
@@ -131,7 +131,7 @@
*/
if (!pmac_i2c_match_adapter(dev, adapter))
continue;
- if (!device_is_compatible(dev, "max6690"))
+ if (!of_device_is_compatible(dev, "max6690"))
continue;
addr = pmac_i2c_get_dev_addr(dev);
loc = of_get_property(dev, "hwsensor-location", NULL);
diff --git a/drivers/macintosh/windfarm_smu_controls.c b/drivers/macintosh/windfarm_smu_controls.c
index ff398ad..58c2590 100644
--- a/drivers/macintosh/windfarm_smu_controls.c
+++ b/drivers/macintosh/windfarm_smu_controls.c
@@ -263,7 +263,7 @@
/* Look for RPM fans */
for (fans = NULL; (fans = of_get_next_child(smu, fans)) != NULL;)
if (!strcmp(fans->name, "rpm-fans") ||
- device_is_compatible(fans, "smu-rpm-fans"))
+ of_device_is_compatible(fans, "smu-rpm-fans"))
break;
for (fan = NULL;
fans && (fan = of_get_next_child(fans, fan)) != NULL;) {
diff --git a/drivers/macintosh/windfarm_smu_sat.c b/drivers/macintosh/windfarm_smu_sat.c
index 9a6c2cf..1043b39 100644
--- a/drivers/macintosh/windfarm_smu_sat.c
+++ b/drivers/macintosh/windfarm_smu_sat.c
@@ -380,7 +380,7 @@
busnode = pmac_i2c_get_bus_node(bus);
while ((dev = of_get_next_child(busnode, dev)) != NULL)
- if (device_is_compatible(dev, "smu-sat"))
+ if (of_device_is_compatible(dev, "smu-sat"))
wf_sat_create(adapter, dev);
return 0;
}
diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c
index cd92a39..0fa9f67 100644
--- a/drivers/serial/pmac_zilog.c
+++ b/drivers/serial/pmac_zilog.c
@@ -1450,7 +1450,7 @@
/*
* Detect port type
*/
- if (device_is_compatible(np, "cobalt"))
+ if (of_device_is_compatible(np, "cobalt"))
uap->flags |= PMACZILOG_FLAG_IS_INTMODEM;
conn = of_get_property(np, "AAPL,connector", &len);
if (conn && (strcmp(conn, "infrared") == 0))
diff --git a/drivers/usb/host/ohci-ppc-of.c b/drivers/usb/host/ohci-ppc-of.c
index 08e237c..c43b66a 100644
--- a/drivers/usb/host/ohci-ppc-of.c
+++ b/drivers/usb/host/ohci-ppc-of.c
@@ -97,8 +97,8 @@
return -ENODEV;
is_bigendian =
- device_is_compatible(dn, "ohci-bigendian") ||
- device_is_compatible(dn, "ohci-be");
+ of_device_is_compatible(dn, "ohci-bigendian") ||
+ of_device_is_compatible(dn, "ohci-be");
dev_dbg(&op->dev, "initializing PPC-OF USB Controller\n");
diff --git a/drivers/video/offb.c b/drivers/video/offb.c
index 3cf603c..885b428 100644
--- a/drivers/video/offb.c
+++ b/drivers/video/offb.c
@@ -322,8 +322,8 @@
ioremap(base + 0x7ff000, 0x1000) + 0xcc0;
par->cmap_data = par->cmap_adr + 1;
par->cmap_type = cmap_m64;
- } else if (dp && (device_is_compatible(dp, "pci1014,b7") ||
- device_is_compatible(dp, "pci1014,21c"))) {
+ } else if (dp && (of_device_is_compatible(dp, "pci1014,b7") ||
+ of_device_is_compatible(dp, "pci1014,21c"))) {
par->cmap_adr = offb_map_reg(dp, 0, 0x6000, 0x1000);
if (par->cmap_adr)
par->cmap_type = cmap_gxt2000;
