| /* |
| * Copyright (c) 2013-2015, Mellanox Technologies. All rights reserved. |
| * |
| * This software is available to you under a choice of one of two |
| * licenses. You may choose to be licensed under the terms of the GNU |
| * General Public License (GPL) Version 2, available from the file |
| * COPYING in the main directory of this source tree, or the |
| * OpenIB.org BSD license below: |
| * |
| * Redistribution and use in source and binary forms, with or |
| * without modification, are permitted provided that the following |
| * conditions are met: |
| * |
| * - Redistributions of source code must retain the above |
| * copyright notice, this list of conditions and the following |
| * disclaimer. |
| * |
| * - Redistributions in binary form must reproduce the above |
| * copyright notice, this list of conditions and the following |
| * disclaimer in the documentation and/or other materials |
| * provided with the distribution. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS |
| * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN |
| * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN |
| * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE |
| * SOFTWARE. |
| */ |
| |
| #include <linux/highmem.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/errno.h> |
| #include <linux/pci.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/slab.h> |
| #include <linux/io-mapping.h> |
| #include <linux/interrupt.h> |
| #include <linux/delay.h> |
| #include <linux/mlx5/driver.h> |
| #include <linux/mlx5/cq.h> |
| #include <linux/mlx5/qp.h> |
| #include <linux/debugfs.h> |
| #include <linux/kmod.h> |
| #include <linux/mlx5/mlx5_ifc.h> |
| #include <linux/mlx5/vport.h> |
| #ifdef CONFIG_RFS_ACCEL |
| #include <linux/cpu_rmap.h> |
| #endif |
| #include <net/devlink.h> |
| #include "mlx5_core.h" |
| #include "lib/eq.h" |
| #include "fs_core.h" |
| #include "lib/mpfs.h" |
| #include "eswitch.h" |
| #include "lib/mlx5.h" |
| #include "fpga/core.h" |
| #include "fpga/ipsec.h" |
| #include "accel/ipsec.h" |
| #include "accel/tls.h" |
| #include "lib/clock.h" |
| #include "lib/vxlan.h" |
| #include "lib/devcom.h" |
| #include "diag/fw_tracer.h" |
| |
| MODULE_AUTHOR("Eli Cohen <eli@mellanox.com>"); |
| MODULE_DESCRIPTION("Mellanox 5th generation network adapters (ConnectX series) core driver"); |
| MODULE_LICENSE("Dual BSD/GPL"); |
| MODULE_VERSION(DRIVER_VERSION); |
| |
| unsigned int mlx5_core_debug_mask; |
| module_param_named(debug_mask, mlx5_core_debug_mask, uint, 0644); |
| MODULE_PARM_DESC(debug_mask, "debug mask: 1 = dump cmd data, 2 = dump cmd exec time, 3 = both. Default=0"); |
| |
| #define MLX5_DEFAULT_PROF 2 |
| static unsigned int prof_sel = MLX5_DEFAULT_PROF; |
| module_param_named(prof_sel, prof_sel, uint, 0444); |
| MODULE_PARM_DESC(prof_sel, "profile selector. Valid range 0 - 2"); |
| |
| static u32 sw_owner_id[4]; |
| |
| enum { |
| MLX5_ATOMIC_REQ_MODE_BE = 0x0, |
| MLX5_ATOMIC_REQ_MODE_HOST_ENDIANNESS = 0x1, |
| }; |
| |
| static struct mlx5_profile profile[] = { |
| [0] = { |
| .mask = 0, |
| }, |
| [1] = { |
| .mask = MLX5_PROF_MASK_QP_SIZE, |
| .log_max_qp = 12, |
| }, |
| [2] = { |
| .mask = MLX5_PROF_MASK_QP_SIZE | |
| MLX5_PROF_MASK_MR_CACHE, |
| .log_max_qp = 18, |
| .mr_cache[0] = { |
| .size = 500, |
| .limit = 250 |
| }, |
| .mr_cache[1] = { |
| .size = 500, |
| .limit = 250 |
| }, |
| .mr_cache[2] = { |
| .size = 500, |
| .limit = 250 |
| }, |
| .mr_cache[3] = { |
| .size = 500, |
| .limit = 250 |
| }, |
| .mr_cache[4] = { |
| .size = 500, |
| .limit = 250 |
| }, |
| .mr_cache[5] = { |
| .size = 500, |
| .limit = 250 |
| }, |
| .mr_cache[6] = { |
| .size = 500, |
| .limit = 250 |
| }, |
| .mr_cache[7] = { |
| .size = 500, |
| .limit = 250 |
| }, |
| .mr_cache[8] = { |
| .size = 500, |
| .limit = 250 |
| }, |
| .mr_cache[9] = { |
| .size = 500, |
| .limit = 250 |
| }, |
| .mr_cache[10] = { |
| .size = 500, |
| .limit = 250 |
| }, |
| .mr_cache[11] = { |
| .size = 500, |
| .limit = 250 |
| }, |
| .mr_cache[12] = { |
| .size = 64, |
| .limit = 32 |
| }, |
| .mr_cache[13] = { |
| .size = 32, |
| .limit = 16 |
| }, |
| .mr_cache[14] = { |
| .size = 16, |
| .limit = 8 |
| }, |
| .mr_cache[15] = { |
| .size = 8, |
| .limit = 4 |
| }, |
| .mr_cache[16] = { |
| .size = 8, |
| .limit = 4 |
| }, |
| .mr_cache[17] = { |
| .size = 8, |
| .limit = 4 |
| }, |
| .mr_cache[18] = { |
| .size = 8, |
| .limit = 4 |
| }, |
| .mr_cache[19] = { |
| .size = 4, |
| .limit = 2 |
| }, |
| .mr_cache[20] = { |
| .size = 4, |
| .limit = 2 |
| }, |
| }, |
| }; |
| |
| #define FW_INIT_TIMEOUT_MILI 2000 |
| #define FW_INIT_WAIT_MS 2 |
| #define FW_PRE_INIT_TIMEOUT_MILI 10000 |
| |
| static int wait_fw_init(struct mlx5_core_dev *dev, u32 max_wait_mili) |
| { |
| unsigned long end = jiffies + msecs_to_jiffies(max_wait_mili); |
| int err = 0; |
| |
| while (fw_initializing(dev)) { |
| if (time_after(jiffies, end)) { |
| err = -EBUSY; |
| break; |
| } |
| msleep(FW_INIT_WAIT_MS); |
| } |
| |
| return err; |
| } |
| |
| static void mlx5_set_driver_version(struct mlx5_core_dev *dev) |
| { |
| int driver_ver_sz = MLX5_FLD_SZ_BYTES(set_driver_version_in, |
| driver_version); |
| u8 in[MLX5_ST_SZ_BYTES(set_driver_version_in)] = {0}; |
| u8 out[MLX5_ST_SZ_BYTES(set_driver_version_out)] = {0}; |
| int remaining_size = driver_ver_sz; |
| char *string; |
| |
| if (!MLX5_CAP_GEN(dev, driver_version)) |
| return; |
| |
| string = MLX5_ADDR_OF(set_driver_version_in, in, driver_version); |
| |
| strncpy(string, "Linux", remaining_size); |
| |
| remaining_size = max_t(int, 0, driver_ver_sz - strlen(string)); |
| strncat(string, ",", remaining_size); |
| |
| remaining_size = max_t(int, 0, driver_ver_sz - strlen(string)); |
| strncat(string, DRIVER_NAME, remaining_size); |
| |
| remaining_size = max_t(int, 0, driver_ver_sz - strlen(string)); |
| strncat(string, ",", remaining_size); |
| |
| remaining_size = max_t(int, 0, driver_ver_sz - strlen(string)); |
| strncat(string, DRIVER_VERSION, remaining_size); |
| |
| /*Send the command*/ |
| MLX5_SET(set_driver_version_in, in, opcode, |
| MLX5_CMD_OP_SET_DRIVER_VERSION); |
| |
| mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out)); |
| } |
| |
| static int set_dma_caps(struct pci_dev *pdev) |
| { |
| int err; |
| |
| err = pci_set_dma_mask(pdev, DMA_BIT_MASK(64)); |
| if (err) { |
| dev_warn(&pdev->dev, "Warning: couldn't set 64-bit PCI DMA mask\n"); |
| err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); |
| if (err) { |
| dev_err(&pdev->dev, "Can't set PCI DMA mask, aborting\n"); |
| return err; |
| } |
| } |
| |
| err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)); |
| if (err) { |
| dev_warn(&pdev->dev, |
| "Warning: couldn't set 64-bit consistent PCI DMA mask\n"); |
| err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)); |
| if (err) { |
| dev_err(&pdev->dev, |
| "Can't set consistent PCI DMA mask, aborting\n"); |
| return err; |
| } |
| } |
| |
| dma_set_max_seg_size(&pdev->dev, 2u * 1024 * 1024 * 1024); |
| return err; |
| } |
| |
| static int mlx5_pci_enable_device(struct mlx5_core_dev *dev) |
| { |
| struct pci_dev *pdev = dev->pdev; |
| int err = 0; |
| |
| mutex_lock(&dev->pci_status_mutex); |
| if (dev->pci_status == MLX5_PCI_STATUS_DISABLED) { |
| err = pci_enable_device(pdev); |
| if (!err) |
| dev->pci_status = MLX5_PCI_STATUS_ENABLED; |
| } |
| mutex_unlock(&dev->pci_status_mutex); |
| |
| return err; |
| } |
| |
| static void mlx5_pci_disable_device(struct mlx5_core_dev *dev) |
| { |
| struct pci_dev *pdev = dev->pdev; |
| |
| mutex_lock(&dev->pci_status_mutex); |
| if (dev->pci_status == MLX5_PCI_STATUS_ENABLED) { |
| pci_disable_device(pdev); |
| dev->pci_status = MLX5_PCI_STATUS_DISABLED; |
| } |
| mutex_unlock(&dev->pci_status_mutex); |
| } |
| |
| static int request_bar(struct pci_dev *pdev) |
| { |
| int err = 0; |
| |
| if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) { |
| dev_err(&pdev->dev, "Missing registers BAR, aborting\n"); |
| return -ENODEV; |
| } |
| |
| err = pci_request_regions(pdev, DRIVER_NAME); |
| if (err) |
| dev_err(&pdev->dev, "Couldn't get PCI resources, aborting\n"); |
| |
| return err; |
| } |
| |
| static void release_bar(struct pci_dev *pdev) |
| { |
| pci_release_regions(pdev); |
| } |
| |
| struct mlx5_reg_host_endianness { |
| u8 he; |
| u8 rsvd[15]; |
| }; |
| |
| #define CAP_MASK(pos, size) ((u64)((1 << (size)) - 1) << (pos)) |
| |
| enum { |
| MLX5_CAP_BITS_RW_MASK = CAP_MASK(MLX5_CAP_OFF_CMDIF_CSUM, 2) | |
| MLX5_DEV_CAP_FLAG_DCT, |
| }; |
| |
| static u16 to_fw_pkey_sz(struct mlx5_core_dev *dev, u32 size) |
| { |
| switch (size) { |
| case 128: |
| return 0; |
| case 256: |
| return 1; |
| case 512: |
| return 2; |
| case 1024: |
| return 3; |
| case 2048: |
| return 4; |
| case 4096: |
| return 5; |
| default: |
| mlx5_core_warn(dev, "invalid pkey table size %d\n", size); |
| return 0; |
| } |
| } |
| |
| static int mlx5_core_get_caps_mode(struct mlx5_core_dev *dev, |
| enum mlx5_cap_type cap_type, |
| enum mlx5_cap_mode cap_mode) |
| { |
| u8 in[MLX5_ST_SZ_BYTES(query_hca_cap_in)]; |
| int out_sz = MLX5_ST_SZ_BYTES(query_hca_cap_out); |
| void *out, *hca_caps; |
| u16 opmod = (cap_type << 1) | (cap_mode & 0x01); |
| int err; |
| |
| memset(in, 0, sizeof(in)); |
| out = kzalloc(out_sz, GFP_KERNEL); |
| if (!out) |
| return -ENOMEM; |
| |
| MLX5_SET(query_hca_cap_in, in, opcode, MLX5_CMD_OP_QUERY_HCA_CAP); |
| MLX5_SET(query_hca_cap_in, in, op_mod, opmod); |
| err = mlx5_cmd_exec(dev, in, sizeof(in), out, out_sz); |
| if (err) { |
| mlx5_core_warn(dev, |
| "QUERY_HCA_CAP : type(%x) opmode(%x) Failed(%d)\n", |
| cap_type, cap_mode, err); |
| goto query_ex; |
| } |
| |
| hca_caps = MLX5_ADDR_OF(query_hca_cap_out, out, capability); |
| |
| switch (cap_mode) { |
| case HCA_CAP_OPMOD_GET_MAX: |
| memcpy(dev->caps.hca_max[cap_type], hca_caps, |
| MLX5_UN_SZ_BYTES(hca_cap_union)); |
| break; |
| case HCA_CAP_OPMOD_GET_CUR: |
| memcpy(dev->caps.hca_cur[cap_type], hca_caps, |
| MLX5_UN_SZ_BYTES(hca_cap_union)); |
| break; |
| default: |
| mlx5_core_warn(dev, |
| "Tried to query dev cap type(%x) with wrong opmode(%x)\n", |
| cap_type, cap_mode); |
| err = -EINVAL; |
| break; |
| } |
| query_ex: |
| kfree(out); |
| return err; |
| } |
| |
| int mlx5_core_get_caps(struct mlx5_core_dev *dev, enum mlx5_cap_type cap_type) |
| { |
| int ret; |
| |
| ret = mlx5_core_get_caps_mode(dev, cap_type, HCA_CAP_OPMOD_GET_CUR); |
| if (ret) |
| return ret; |
| return mlx5_core_get_caps_mode(dev, cap_type, HCA_CAP_OPMOD_GET_MAX); |
| } |
| |
| static int set_caps(struct mlx5_core_dev *dev, void *in, int in_sz, int opmod) |
| { |
| u32 out[MLX5_ST_SZ_DW(set_hca_cap_out)] = {0}; |
| |
| MLX5_SET(set_hca_cap_in, in, opcode, MLX5_CMD_OP_SET_HCA_CAP); |
| MLX5_SET(set_hca_cap_in, in, op_mod, opmod << 1); |
| return mlx5_cmd_exec(dev, in, in_sz, out, sizeof(out)); |
| } |
| |
| static int handle_hca_cap_atomic(struct mlx5_core_dev *dev) |
| { |
| void *set_ctx; |
| void *set_hca_cap; |
| int set_sz = MLX5_ST_SZ_BYTES(set_hca_cap_in); |
| int req_endianness; |
| int err; |
| |
| if (MLX5_CAP_GEN(dev, atomic)) { |
| err = mlx5_core_get_caps(dev, MLX5_CAP_ATOMIC); |
| if (err) |
| return err; |
| } else { |
| return 0; |
| } |
| |
| req_endianness = |
| MLX5_CAP_ATOMIC(dev, |
| supported_atomic_req_8B_endianness_mode_1); |
| |
| if (req_endianness != MLX5_ATOMIC_REQ_MODE_HOST_ENDIANNESS) |
| return 0; |
| |
| set_ctx = kzalloc(set_sz, GFP_KERNEL); |
| if (!set_ctx) |
| return -ENOMEM; |
| |
| set_hca_cap = MLX5_ADDR_OF(set_hca_cap_in, set_ctx, capability); |
| |
| /* Set requestor to host endianness */ |
| MLX5_SET(atomic_caps, set_hca_cap, atomic_req_8B_endianness_mode, |
| MLX5_ATOMIC_REQ_MODE_HOST_ENDIANNESS); |
| |
| err = set_caps(dev, set_ctx, set_sz, MLX5_SET_HCA_CAP_OP_MOD_ATOMIC); |
| |
| kfree(set_ctx); |
| return err; |
| } |
| |
| static int handle_hca_cap(struct mlx5_core_dev *dev) |
| { |
| void *set_ctx = NULL; |
| struct mlx5_profile *prof = dev->profile; |
| int err = -ENOMEM; |
| int set_sz = MLX5_ST_SZ_BYTES(set_hca_cap_in); |
| void *set_hca_cap; |
| |
| set_ctx = kzalloc(set_sz, GFP_KERNEL); |
| if (!set_ctx) |
| goto query_ex; |
| |
| err = mlx5_core_get_caps(dev, MLX5_CAP_GENERAL); |
| if (err) |
| goto query_ex; |
| |
| set_hca_cap = MLX5_ADDR_OF(set_hca_cap_in, set_ctx, |
| capability); |
| memcpy(set_hca_cap, dev->caps.hca_cur[MLX5_CAP_GENERAL], |
| MLX5_ST_SZ_BYTES(cmd_hca_cap)); |
| |
| mlx5_core_dbg(dev, "Current Pkey table size %d Setting new size %d\n", |
| mlx5_to_sw_pkey_sz(MLX5_CAP_GEN(dev, pkey_table_size)), |
| 128); |
| /* we limit the size of the pkey table to 128 entries for now */ |
| MLX5_SET(cmd_hca_cap, set_hca_cap, pkey_table_size, |
| to_fw_pkey_sz(dev, 128)); |
| |
| /* Check log_max_qp from HCA caps to set in current profile */ |
| if (MLX5_CAP_GEN_MAX(dev, log_max_qp) < profile[prof_sel].log_max_qp) { |
| mlx5_core_warn(dev, "log_max_qp value in current profile is %d, changing it to HCA capability limit (%d)\n", |
| profile[prof_sel].log_max_qp, |
| MLX5_CAP_GEN_MAX(dev, log_max_qp)); |
| profile[prof_sel].log_max_qp = MLX5_CAP_GEN_MAX(dev, log_max_qp); |
| } |
| if (prof->mask & MLX5_PROF_MASK_QP_SIZE) |
| MLX5_SET(cmd_hca_cap, set_hca_cap, log_max_qp, |
| prof->log_max_qp); |
| |
| /* disable cmdif checksum */ |
| MLX5_SET(cmd_hca_cap, set_hca_cap, cmdif_checksum, 0); |
| |
| /* Enable 4K UAR only when HCA supports it and page size is bigger |
| * than 4K. |
| */ |
| if (MLX5_CAP_GEN_MAX(dev, uar_4k) && PAGE_SIZE > 4096) |
| MLX5_SET(cmd_hca_cap, set_hca_cap, uar_4k, 1); |
| |
| MLX5_SET(cmd_hca_cap, set_hca_cap, log_uar_page_sz, PAGE_SHIFT - 12); |
| |
| if (MLX5_CAP_GEN_MAX(dev, cache_line_128byte)) |
| MLX5_SET(cmd_hca_cap, |
| set_hca_cap, |
| cache_line_128byte, |
| cache_line_size() >= 128 ? 1 : 0); |
| |
| if (MLX5_CAP_GEN_MAX(dev, dct)) |
| MLX5_SET(cmd_hca_cap, set_hca_cap, dct, 1); |
| |
| if (MLX5_CAP_GEN_MAX(dev, num_vhca_ports)) |
| MLX5_SET(cmd_hca_cap, |
| set_hca_cap, |
| num_vhca_ports, |
| MLX5_CAP_GEN_MAX(dev, num_vhca_ports)); |
| |
| err = set_caps(dev, set_ctx, set_sz, |
| MLX5_SET_HCA_CAP_OP_MOD_GENERAL_DEVICE); |
| |
| query_ex: |
| kfree(set_ctx); |
| return err; |
| } |
| |
| static int set_hca_ctrl(struct mlx5_core_dev *dev) |
| { |
| struct mlx5_reg_host_endianness he_in; |
| struct mlx5_reg_host_endianness he_out; |
| int err; |
| |
| if (!mlx5_core_is_pf(dev)) |
| return 0; |
| |
| memset(&he_in, 0, sizeof(he_in)); |
| he_in.he = MLX5_SET_HOST_ENDIANNESS; |
| err = mlx5_core_access_reg(dev, &he_in, sizeof(he_in), |
| &he_out, sizeof(he_out), |
| MLX5_REG_HOST_ENDIANNESS, 0, 1); |
| return err; |
| } |
| |
| static int mlx5_core_set_hca_defaults(struct mlx5_core_dev *dev) |
| { |
| int ret = 0; |
| |
| /* Disable local_lb by default */ |
| if (MLX5_CAP_GEN(dev, port_type) == MLX5_CAP_PORT_TYPE_ETH) |
| ret = mlx5_nic_vport_update_local_lb(dev, false); |
| |
| return ret; |
| } |
| |
| int mlx5_core_enable_hca(struct mlx5_core_dev *dev, u16 func_id) |
| { |
| u32 out[MLX5_ST_SZ_DW(enable_hca_out)] = {0}; |
| u32 in[MLX5_ST_SZ_DW(enable_hca_in)] = {0}; |
| |
| MLX5_SET(enable_hca_in, in, opcode, MLX5_CMD_OP_ENABLE_HCA); |
| MLX5_SET(enable_hca_in, in, function_id, func_id); |
| return mlx5_cmd_exec(dev, &in, sizeof(in), &out, sizeof(out)); |
| } |
| |
| int mlx5_core_disable_hca(struct mlx5_core_dev *dev, u16 func_id) |
| { |
| u32 out[MLX5_ST_SZ_DW(disable_hca_out)] = {0}; |
| u32 in[MLX5_ST_SZ_DW(disable_hca_in)] = {0}; |
| |
| MLX5_SET(disable_hca_in, in, opcode, MLX5_CMD_OP_DISABLE_HCA); |
| MLX5_SET(disable_hca_in, in, function_id, func_id); |
| return mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out)); |
| } |
| |
| u64 mlx5_read_internal_timer(struct mlx5_core_dev *dev, |
| struct ptp_system_timestamp *sts) |
| { |
| u32 timer_h, timer_h1, timer_l; |
| |
| timer_h = ioread32be(&dev->iseg->internal_timer_h); |
| ptp_read_system_prets(sts); |
| timer_l = ioread32be(&dev->iseg->internal_timer_l); |
| ptp_read_system_postts(sts); |
| timer_h1 = ioread32be(&dev->iseg->internal_timer_h); |
| if (timer_h != timer_h1) { |
| /* wrap around */ |
| ptp_read_system_prets(sts); |
| timer_l = ioread32be(&dev->iseg->internal_timer_l); |
| ptp_read_system_postts(sts); |
| } |
| |
| return (u64)timer_l | (u64)timer_h1 << 32; |
| } |
| |
| static int mlx5_core_set_issi(struct mlx5_core_dev *dev) |
| { |
| u32 query_in[MLX5_ST_SZ_DW(query_issi_in)] = {0}; |
| u32 query_out[MLX5_ST_SZ_DW(query_issi_out)] = {0}; |
| u32 sup_issi; |
| int err; |
| |
| MLX5_SET(query_issi_in, query_in, opcode, MLX5_CMD_OP_QUERY_ISSI); |
| err = mlx5_cmd_exec(dev, query_in, sizeof(query_in), |
| query_out, sizeof(query_out)); |
| if (err) { |
| u32 syndrome; |
| u8 status; |
| |
| mlx5_cmd_mbox_status(query_out, &status, &syndrome); |
| if (!status || syndrome == MLX5_DRIVER_SYND) { |
| mlx5_core_err(dev, "Failed to query ISSI err(%d) status(%d) synd(%d)\n", |
| err, status, syndrome); |
| return err; |
| } |
| |
| mlx5_core_warn(dev, "Query ISSI is not supported by FW, ISSI is 0\n"); |
| dev->issi = 0; |
| return 0; |
| } |
| |
| sup_issi = MLX5_GET(query_issi_out, query_out, supported_issi_dw0); |
| |
| if (sup_issi & (1 << 1)) { |
| u32 set_in[MLX5_ST_SZ_DW(set_issi_in)] = {0}; |
| u32 set_out[MLX5_ST_SZ_DW(set_issi_out)] = {0}; |
| |
| MLX5_SET(set_issi_in, set_in, opcode, MLX5_CMD_OP_SET_ISSI); |
| MLX5_SET(set_issi_in, set_in, current_issi, 1); |
| err = mlx5_cmd_exec(dev, set_in, sizeof(set_in), |
| set_out, sizeof(set_out)); |
| if (err) { |
| mlx5_core_err(dev, "Failed to set ISSI to 1 err(%d)\n", |
| err); |
| return err; |
| } |
| |
| dev->issi = 1; |
| |
| return 0; |
| } else if (sup_issi & (1 << 0) || !sup_issi) { |
| return 0; |
| } |
| |
| return -EOPNOTSUPP; |
| } |
| |
| static int mlx5_pci_init(struct mlx5_core_dev *dev, struct mlx5_priv *priv) |
| { |
| struct pci_dev *pdev = dev->pdev; |
| int err = 0; |
| |
| pci_set_drvdata(dev->pdev, dev); |
| strncpy(priv->name, dev_name(&pdev->dev), MLX5_MAX_NAME_LEN); |
| priv->name[MLX5_MAX_NAME_LEN - 1] = 0; |
| |
| mutex_init(&priv->pgdir_mutex); |
| INIT_LIST_HEAD(&priv->pgdir_list); |
| spin_lock_init(&priv->mkey_lock); |
| |
| mutex_init(&priv->alloc_mutex); |
| |
| priv->numa_node = dev_to_node(&dev->pdev->dev); |
| |
| if (mlx5_debugfs_root) |
| priv->dbg_root = |
| debugfs_create_dir(pci_name(pdev), mlx5_debugfs_root); |
| |
| err = mlx5_pci_enable_device(dev); |
| if (err) { |
| dev_err(&pdev->dev, "Cannot enable PCI device, aborting\n"); |
| goto err_dbg; |
| } |
| |
| err = request_bar(pdev); |
| if (err) { |
| dev_err(&pdev->dev, "error requesting BARs, aborting\n"); |
| goto err_disable; |
| } |
| |
| pci_set_master(pdev); |
| |
| err = set_dma_caps(pdev); |
| if (err) { |
| dev_err(&pdev->dev, "Failed setting DMA capabilities mask, aborting\n"); |
| goto err_clr_master; |
| } |
| |
| if (pci_enable_atomic_ops_to_root(pdev, PCI_EXP_DEVCAP2_ATOMIC_COMP32) && |
| pci_enable_atomic_ops_to_root(pdev, PCI_EXP_DEVCAP2_ATOMIC_COMP64) && |
| pci_enable_atomic_ops_to_root(pdev, PCI_EXP_DEVCAP2_ATOMIC_COMP128)) |
| mlx5_core_dbg(dev, "Enabling pci atomics failed\n"); |
| |
| dev->iseg_base = pci_resource_start(dev->pdev, 0); |
| dev->iseg = ioremap(dev->iseg_base, sizeof(*dev->iseg)); |
| if (!dev->iseg) { |
| err = -ENOMEM; |
| dev_err(&pdev->dev, "Failed mapping initialization segment, aborting\n"); |
| goto err_clr_master; |
| } |
| |
| return 0; |
| |
| err_clr_master: |
| pci_clear_master(dev->pdev); |
| release_bar(dev->pdev); |
| err_disable: |
| mlx5_pci_disable_device(dev); |
| |
| err_dbg: |
| debugfs_remove(priv->dbg_root); |
| return err; |
| } |
| |
| static void mlx5_pci_close(struct mlx5_core_dev *dev, struct mlx5_priv *priv) |
| { |
| iounmap(dev->iseg); |
| pci_clear_master(dev->pdev); |
| release_bar(dev->pdev); |
| mlx5_pci_disable_device(dev); |
| debugfs_remove_recursive(priv->dbg_root); |
| } |
| |
| static int mlx5_init_once(struct mlx5_core_dev *dev, struct mlx5_priv *priv) |
| { |
| struct pci_dev *pdev = dev->pdev; |
| int err; |
| |
| priv->devcom = mlx5_devcom_register_device(dev); |
| if (IS_ERR(priv->devcom)) |
| dev_err(&pdev->dev, "failed to register with devcom (0x%p)\n", |
| priv->devcom); |
| |
| err = mlx5_query_board_id(dev); |
| if (err) { |
| dev_err(&pdev->dev, "query board id failed\n"); |
| goto err_devcom; |
| } |
| |
| err = mlx5_eq_table_init(dev); |
| if (err) { |
| dev_err(&pdev->dev, "failed to initialize eq\n"); |
| goto err_devcom; |
| } |
| |
| err = mlx5_events_init(dev); |
| if (err) { |
| dev_err(&pdev->dev, "failed to initialize events\n"); |
| goto err_eq_cleanup; |
| } |
| |
| err = mlx5_cq_debugfs_init(dev); |
| if (err) { |
| dev_err(&pdev->dev, "failed to initialize cq debugfs\n"); |
| goto err_events_cleanup; |
| } |
| |
| mlx5_init_qp_table(dev); |
| |
| mlx5_init_mkey_table(dev); |
| |
| mlx5_init_reserved_gids(dev); |
| |
| mlx5_init_clock(dev); |
| |
| dev->vxlan = mlx5_vxlan_create(dev); |
| |
| err = mlx5_init_rl_table(dev); |
| if (err) { |
| dev_err(&pdev->dev, "Failed to init rate limiting\n"); |
| goto err_tables_cleanup; |
| } |
| |
| err = mlx5_mpfs_init(dev); |
| if (err) { |
| dev_err(&pdev->dev, "Failed to init l2 table %d\n", err); |
| goto err_rl_cleanup; |
| } |
| |
| err = mlx5_eswitch_init(dev); |
| if (err) { |
| dev_err(&pdev->dev, "Failed to init eswitch %d\n", err); |
| goto err_mpfs_cleanup; |
| } |
| |
| err = mlx5_sriov_init(dev); |
| if (err) { |
| dev_err(&pdev->dev, "Failed to init sriov %d\n", err); |
| goto err_eswitch_cleanup; |
| } |
| |
| err = mlx5_fpga_init(dev); |
| if (err) { |
| dev_err(&pdev->dev, "Failed to init fpga device %d\n", err); |
| goto err_sriov_cleanup; |
| } |
| |
| dev->tracer = mlx5_fw_tracer_create(dev); |
| |
| return 0; |
| |
| err_sriov_cleanup: |
| mlx5_sriov_cleanup(dev); |
| err_eswitch_cleanup: |
| mlx5_eswitch_cleanup(dev->priv.eswitch); |
| err_mpfs_cleanup: |
| mlx5_mpfs_cleanup(dev); |
| err_rl_cleanup: |
| mlx5_cleanup_rl_table(dev); |
| err_tables_cleanup: |
| mlx5_vxlan_destroy(dev->vxlan); |
| mlx5_cleanup_mkey_table(dev); |
| mlx5_cleanup_qp_table(dev); |
| mlx5_cq_debugfs_cleanup(dev); |
| err_events_cleanup: |
| mlx5_events_cleanup(dev); |
| err_eq_cleanup: |
| mlx5_eq_table_cleanup(dev); |
| err_devcom: |
| mlx5_devcom_unregister_device(dev->priv.devcom); |
| |
| return err; |
| } |
| |
| static void mlx5_cleanup_once(struct mlx5_core_dev *dev) |
| { |
| mlx5_fw_tracer_destroy(dev->tracer); |
| mlx5_fpga_cleanup(dev); |
| mlx5_sriov_cleanup(dev); |
| mlx5_eswitch_cleanup(dev->priv.eswitch); |
| mlx5_mpfs_cleanup(dev); |
| mlx5_cleanup_rl_table(dev); |
| mlx5_vxlan_destroy(dev->vxlan); |
| mlx5_cleanup_clock(dev); |
| mlx5_cleanup_reserved_gids(dev); |
| mlx5_cleanup_mkey_table(dev); |
| mlx5_cleanup_qp_table(dev); |
| mlx5_cq_debugfs_cleanup(dev); |
| mlx5_events_cleanup(dev); |
| mlx5_eq_table_cleanup(dev); |
| mlx5_devcom_unregister_device(dev->priv.devcom); |
| } |
| |
| static int mlx5_load_one(struct mlx5_core_dev *dev, struct mlx5_priv *priv, |
| bool boot) |
| { |
| struct pci_dev *pdev = dev->pdev; |
| int err; |
| |
| mutex_lock(&dev->intf_state_mutex); |
| if (test_bit(MLX5_INTERFACE_STATE_UP, &dev->intf_state)) { |
| dev_warn(&dev->pdev->dev, "%s: interface is up, NOP\n", |
| __func__); |
| goto out; |
| } |
| |
| dev_info(&pdev->dev, "firmware version: %d.%d.%d\n", fw_rev_maj(dev), |
| fw_rev_min(dev), fw_rev_sub(dev)); |
| |
| /* Only PFs hold the relevant PCIe information for this query */ |
| if (mlx5_core_is_pf(dev)) |
| pcie_print_link_status(dev->pdev); |
| |
| /* on load removing any previous indication of internal error, device is |
| * up |
| */ |
| dev->state = MLX5_DEVICE_STATE_UP; |
| |
| /* wait for firmware to accept initialization segments configurations |
| */ |
| err = wait_fw_init(dev, FW_PRE_INIT_TIMEOUT_MILI); |
| if (err) { |
| dev_err(&dev->pdev->dev, "Firmware over %d MS in pre-initializing state, aborting\n", |
| FW_PRE_INIT_TIMEOUT_MILI); |
| goto out_err; |
| } |
| |
| err = mlx5_cmd_init(dev); |
| if (err) { |
| dev_err(&pdev->dev, "Failed initializing command interface, aborting\n"); |
| goto out_err; |
| } |
| |
| err = wait_fw_init(dev, FW_INIT_TIMEOUT_MILI); |
| if (err) { |
| dev_err(&dev->pdev->dev, "Firmware over %d MS in initializing state, aborting\n", |
| FW_INIT_TIMEOUT_MILI); |
| goto err_cmd_cleanup; |
| } |
| |
| err = mlx5_core_enable_hca(dev, 0); |
| if (err) { |
| dev_err(&pdev->dev, "enable hca failed\n"); |
| goto err_cmd_cleanup; |
| } |
| |
| err = mlx5_core_set_issi(dev); |
| if (err) { |
| dev_err(&pdev->dev, "failed to set issi\n"); |
| goto err_disable_hca; |
| } |
| |
| err = mlx5_satisfy_startup_pages(dev, 1); |
| if (err) { |
| dev_err(&pdev->dev, "failed to allocate boot pages\n"); |
| goto err_disable_hca; |
| } |
| |
| err = set_hca_ctrl(dev); |
| if (err) { |
| dev_err(&pdev->dev, "set_hca_ctrl failed\n"); |
| goto reclaim_boot_pages; |
| } |
| |
| err = handle_hca_cap(dev); |
| if (err) { |
| dev_err(&pdev->dev, "handle_hca_cap failed\n"); |
| goto reclaim_boot_pages; |
| } |
| |
| err = handle_hca_cap_atomic(dev); |
| if (err) { |
| dev_err(&pdev->dev, "handle_hca_cap_atomic failed\n"); |
| goto reclaim_boot_pages; |
| } |
| |
| err = mlx5_satisfy_startup_pages(dev, 0); |
| if (err) { |
| dev_err(&pdev->dev, "failed to allocate init pages\n"); |
| goto reclaim_boot_pages; |
| } |
| |
| err = mlx5_cmd_init_hca(dev, sw_owner_id); |
| if (err) { |
| dev_err(&pdev->dev, "init hca failed\n"); |
| goto reclaim_boot_pages; |
| } |
| |
| mlx5_set_driver_version(dev); |
| |
| mlx5_start_health_poll(dev); |
| |
| err = mlx5_query_hca_caps(dev); |
| if (err) { |
| dev_err(&pdev->dev, "query hca failed\n"); |
| goto err_stop_poll; |
| } |
| |
| if (boot) { |
| err = mlx5_init_once(dev, priv); |
| if (err) { |
| dev_err(&pdev->dev, "sw objs init failed\n"); |
| goto err_stop_poll; |
| } |
| } |
| |
| dev->priv.uar = mlx5_get_uars_page(dev); |
| if (IS_ERR(dev->priv.uar)) { |
| dev_err(&pdev->dev, "Failed allocating uar, aborting\n"); |
| err = PTR_ERR(dev->priv.uar); |
| goto err_get_uars; |
| } |
| |
| mlx5_events_start(dev); |
| mlx5_pagealloc_start(dev); |
| |
| err = mlx5_eq_table_create(dev); |
| if (err) { |
| dev_err(&pdev->dev, "Failed to create EQs\n"); |
| goto err_eq_table; |
| } |
| |
| err = mlx5_fw_tracer_init(dev->tracer); |
| if (err) { |
| dev_err(&pdev->dev, "Failed to init FW tracer\n"); |
| goto err_fw_tracer; |
| } |
| |
| err = mlx5_fpga_device_start(dev); |
| if (err) { |
| dev_err(&pdev->dev, "fpga device start failed %d\n", err); |
| goto err_fpga_start; |
| } |
| |
| err = mlx5_accel_ipsec_init(dev); |
| if (err) { |
| dev_err(&pdev->dev, "IPSec device start failed %d\n", err); |
| goto err_ipsec_start; |
| } |
| |
| err = mlx5_accel_tls_init(dev); |
| if (err) { |
| dev_err(&pdev->dev, "TLS device start failed %d\n", err); |
| goto err_tls_start; |
| } |
| |
| err = mlx5_init_fs(dev); |
| if (err) { |
| dev_err(&pdev->dev, "Failed to init flow steering\n"); |
| goto err_fs; |
| } |
| |
| err = mlx5_core_set_hca_defaults(dev); |
| if (err) { |
| dev_err(&pdev->dev, "Failed to set hca defaults\n"); |
| goto err_fs; |
| } |
| |
| err = mlx5_sriov_attach(dev); |
| if (err) { |
| dev_err(&pdev->dev, "sriov init failed %d\n", err); |
| goto err_sriov; |
| } |
| |
| if (mlx5_device_registered(dev)) { |
| mlx5_attach_device(dev); |
| } else { |
| err = mlx5_register_device(dev); |
| if (err) { |
| dev_err(&pdev->dev, "mlx5_register_device failed %d\n", err); |
| goto err_reg_dev; |
| } |
| } |
| |
| set_bit(MLX5_INTERFACE_STATE_UP, &dev->intf_state); |
| out: |
| mutex_unlock(&dev->intf_state_mutex); |
| |
| return 0; |
| |
| err_reg_dev: |
| mlx5_sriov_detach(dev); |
| |
| err_sriov: |
| mlx5_cleanup_fs(dev); |
| |
| err_fs: |
| mlx5_accel_tls_cleanup(dev); |
| |
| err_tls_start: |
| mlx5_accel_ipsec_cleanup(dev); |
| |
| err_ipsec_start: |
| mlx5_fpga_device_stop(dev); |
| |
| err_fpga_start: |
| mlx5_fw_tracer_cleanup(dev->tracer); |
| |
| err_fw_tracer: |
| mlx5_eq_table_destroy(dev); |
| |
| err_eq_table: |
| mlx5_pagealloc_stop(dev); |
| mlx5_events_stop(dev); |
| mlx5_put_uars_page(dev, priv->uar); |
| |
| err_get_uars: |
| if (boot) |
| mlx5_cleanup_once(dev); |
| |
| err_stop_poll: |
| mlx5_stop_health_poll(dev, boot); |
| if (mlx5_cmd_teardown_hca(dev)) { |
| dev_err(&dev->pdev->dev, "tear_down_hca failed, skip cleanup\n"); |
| goto out_err; |
| } |
| |
| reclaim_boot_pages: |
| mlx5_reclaim_startup_pages(dev); |
| |
| err_disable_hca: |
| mlx5_core_disable_hca(dev, 0); |
| |
| err_cmd_cleanup: |
| mlx5_cmd_cleanup(dev); |
| |
| out_err: |
| dev->state = MLX5_DEVICE_STATE_INTERNAL_ERROR; |
| mutex_unlock(&dev->intf_state_mutex); |
| |
| return err; |
| } |
| |
| static int mlx5_unload_one(struct mlx5_core_dev *dev, struct mlx5_priv *priv, |
| bool cleanup) |
| { |
| int err = 0; |
| |
| if (cleanup) |
| mlx5_drain_health_recovery(dev); |
| |
| mutex_lock(&dev->intf_state_mutex); |
| if (!test_bit(MLX5_INTERFACE_STATE_UP, &dev->intf_state)) { |
| dev_warn(&dev->pdev->dev, "%s: interface is down, NOP\n", |
| __func__); |
| if (cleanup) |
| mlx5_cleanup_once(dev); |
| goto out; |
| } |
| |
| clear_bit(MLX5_INTERFACE_STATE_UP, &dev->intf_state); |
| |
| if (mlx5_device_registered(dev)) |
| mlx5_detach_device(dev); |
| |
| mlx5_sriov_detach(dev); |
| mlx5_cleanup_fs(dev); |
| mlx5_accel_ipsec_cleanup(dev); |
| mlx5_accel_tls_cleanup(dev); |
| mlx5_fpga_device_stop(dev); |
| mlx5_fw_tracer_cleanup(dev->tracer); |
| mlx5_eq_table_destroy(dev); |
| mlx5_pagealloc_stop(dev); |
| mlx5_events_stop(dev); |
| mlx5_put_uars_page(dev, priv->uar); |
| if (cleanup) |
| mlx5_cleanup_once(dev); |
| mlx5_stop_health_poll(dev, cleanup); |
| |
| err = mlx5_cmd_teardown_hca(dev); |
| if (err) { |
| dev_err(&dev->pdev->dev, "tear_down_hca failed, skip cleanup\n"); |
| goto out; |
| } |
| mlx5_reclaim_startup_pages(dev); |
| mlx5_core_disable_hca(dev, 0); |
| mlx5_cmd_cleanup(dev); |
| |
| out: |
| mutex_unlock(&dev->intf_state_mutex); |
| return err; |
| } |
| |
| static const struct devlink_ops mlx5_devlink_ops = { |
| #ifdef CONFIG_MLX5_ESWITCH |
| .eswitch_mode_set = mlx5_devlink_eswitch_mode_set, |
| .eswitch_mode_get = mlx5_devlink_eswitch_mode_get, |
| .eswitch_inline_mode_set = mlx5_devlink_eswitch_inline_mode_set, |
| .eswitch_inline_mode_get = mlx5_devlink_eswitch_inline_mode_get, |
| .eswitch_encap_mode_set = mlx5_devlink_eswitch_encap_mode_set, |
| .eswitch_encap_mode_get = mlx5_devlink_eswitch_encap_mode_get, |
| #endif |
| }; |
| |
| #define MLX5_IB_MOD "mlx5_ib" |
| static int init_one(struct pci_dev *pdev, |
| const struct pci_device_id *id) |
| { |
| struct mlx5_core_dev *dev; |
| struct devlink *devlink; |
| struct mlx5_priv *priv; |
| int err; |
| |
| devlink = devlink_alloc(&mlx5_devlink_ops, sizeof(*dev)); |
| if (!devlink) { |
| dev_err(&pdev->dev, "kzalloc failed\n"); |
| return -ENOMEM; |
| } |
| |
| dev = devlink_priv(devlink); |
| priv = &dev->priv; |
| priv->pci_dev_data = id->driver_data; |
| |
| pci_set_drvdata(pdev, dev); |
| |
| dev->pdev = pdev; |
| dev->profile = &profile[prof_sel]; |
| |
| INIT_LIST_HEAD(&priv->ctx_list); |
| spin_lock_init(&priv->ctx_lock); |
| mutex_init(&dev->pci_status_mutex); |
| mutex_init(&dev->intf_state_mutex); |
| |
| mutex_init(&priv->bfregs.reg_head.lock); |
| mutex_init(&priv->bfregs.wc_head.lock); |
| INIT_LIST_HEAD(&priv->bfregs.reg_head.list); |
| INIT_LIST_HEAD(&priv->bfregs.wc_head.list); |
| |
| err = mlx5_pci_init(dev, priv); |
| if (err) { |
| dev_err(&pdev->dev, "mlx5_pci_init failed with error code %d\n", err); |
| goto clean_dev; |
| } |
| |
| err = mlx5_health_init(dev); |
| if (err) { |
| dev_err(&pdev->dev, "mlx5_health_init failed with error code %d\n", err); |
| goto close_pci; |
| } |
| |
| err = mlx5_pagealloc_init(dev); |
| if (err) |
| goto err_pagealloc_init; |
| |
| err = mlx5_load_one(dev, priv, true); |
| if (err) { |
| dev_err(&pdev->dev, "mlx5_load_one failed with error code %d\n", err); |
| goto err_load_one; |
| } |
| |
| request_module_nowait(MLX5_IB_MOD); |
| |
| err = devlink_register(devlink, &pdev->dev); |
| if (err) |
| goto clean_load; |
| |
| pci_save_state(pdev); |
| return 0; |
| |
| clean_load: |
| mlx5_unload_one(dev, priv, true); |
| err_load_one: |
| mlx5_pagealloc_cleanup(dev); |
| err_pagealloc_init: |
| mlx5_health_cleanup(dev); |
| close_pci: |
| mlx5_pci_close(dev, priv); |
| clean_dev: |
| devlink_free(devlink); |
| |
| return err; |
| } |
| |
| static void remove_one(struct pci_dev *pdev) |
| { |
| struct mlx5_core_dev *dev = pci_get_drvdata(pdev); |
| struct devlink *devlink = priv_to_devlink(dev); |
| struct mlx5_priv *priv = &dev->priv; |
| |
| devlink_unregister(devlink); |
| mlx5_unregister_device(dev); |
| |
| if (mlx5_unload_one(dev, priv, true)) { |
| dev_err(&dev->pdev->dev, "mlx5_unload_one failed\n"); |
| mlx5_health_cleanup(dev); |
| return; |
| } |
| |
| mlx5_pagealloc_cleanup(dev); |
| mlx5_health_cleanup(dev); |
| mlx5_pci_close(dev, priv); |
| devlink_free(devlink); |
| } |
| |
| static pci_ers_result_t mlx5_pci_err_detected(struct pci_dev *pdev, |
| pci_channel_state_t state) |
| { |
| struct mlx5_core_dev *dev = pci_get_drvdata(pdev); |
| struct mlx5_priv *priv = &dev->priv; |
| |
| dev_info(&pdev->dev, "%s was called\n", __func__); |
| |
| mlx5_enter_error_state(dev, false); |
| mlx5_unload_one(dev, priv, false); |
| /* In case of kernel call drain the health wq */ |
| if (state) { |
| mlx5_drain_health_wq(dev); |
| mlx5_pci_disable_device(dev); |
| } |
| |
| return state == pci_channel_io_perm_failure ? |
| PCI_ERS_RESULT_DISCONNECT : PCI_ERS_RESULT_NEED_RESET; |
| } |
| |
| /* wait for the device to show vital signs by waiting |
| * for the health counter to start counting. |
| */ |
| static int wait_vital(struct pci_dev *pdev) |
| { |
| struct mlx5_core_dev *dev = pci_get_drvdata(pdev); |
| struct mlx5_core_health *health = &dev->priv.health; |
| const int niter = 100; |
| u32 last_count = 0; |
| u32 count; |
| int i; |
| |
| for (i = 0; i < niter; i++) { |
| count = ioread32be(health->health_counter); |
| if (count && count != 0xffffffff) { |
| if (last_count && last_count != count) { |
| dev_info(&pdev->dev, "Counter value 0x%x after %d iterations\n", count, i); |
| return 0; |
| } |
| last_count = count; |
| } |
| msleep(50); |
| } |
| |
| return -ETIMEDOUT; |
| } |
| |
| static pci_ers_result_t mlx5_pci_slot_reset(struct pci_dev *pdev) |
| { |
| struct mlx5_core_dev *dev = pci_get_drvdata(pdev); |
| int err; |
| |
| dev_info(&pdev->dev, "%s was called\n", __func__); |
| |
| err = mlx5_pci_enable_device(dev); |
| if (err) { |
| dev_err(&pdev->dev, "%s: mlx5_pci_enable_device failed with error code: %d\n" |
| , __func__, err); |
| return PCI_ERS_RESULT_DISCONNECT; |
| } |
| |
| pci_set_master(pdev); |
| pci_restore_state(pdev); |
| pci_save_state(pdev); |
| |
| if (wait_vital(pdev)) { |
| dev_err(&pdev->dev, "%s: wait_vital timed out\n", __func__); |
| return PCI_ERS_RESULT_DISCONNECT; |
| } |
| |
| return PCI_ERS_RESULT_RECOVERED; |
| } |
| |
| static void mlx5_pci_resume(struct pci_dev *pdev) |
| { |
| struct mlx5_core_dev *dev = pci_get_drvdata(pdev); |
| struct mlx5_priv *priv = &dev->priv; |
| int err; |
| |
| dev_info(&pdev->dev, "%s was called\n", __func__); |
| |
| err = mlx5_load_one(dev, priv, false); |
| if (err) |
| dev_err(&pdev->dev, "%s: mlx5_load_one failed with error code: %d\n" |
| , __func__, err); |
| else |
| dev_info(&pdev->dev, "%s: device recovered\n", __func__); |
| } |
| |
| static const struct pci_error_handlers mlx5_err_handler = { |
| .error_detected = mlx5_pci_err_detected, |
| .slot_reset = mlx5_pci_slot_reset, |
| .resume = mlx5_pci_resume |
| }; |
| |
| static int mlx5_try_fast_unload(struct mlx5_core_dev *dev) |
| { |
| bool fast_teardown = false, force_teardown = false; |
| int ret = 1; |
| |
| fast_teardown = MLX5_CAP_GEN(dev, fast_teardown); |
| force_teardown = MLX5_CAP_GEN(dev, force_teardown); |
| |
| mlx5_core_dbg(dev, "force teardown firmware support=%d\n", force_teardown); |
| mlx5_core_dbg(dev, "fast teardown firmware support=%d\n", fast_teardown); |
| |
| if (!fast_teardown && !force_teardown) |
| return -EOPNOTSUPP; |
| |
| if (dev->state == MLX5_DEVICE_STATE_INTERNAL_ERROR) { |
| mlx5_core_dbg(dev, "Device in internal error state, giving up\n"); |
| return -EAGAIN; |
| } |
| |
| /* Panic tear down fw command will stop the PCI bus communication |
| * with the HCA, so the health polll is no longer needed. |
| */ |
| mlx5_drain_health_wq(dev); |
| mlx5_stop_health_poll(dev, false); |
| |
| ret = mlx5_cmd_fast_teardown_hca(dev); |
| if (!ret) |
| goto succeed; |
| |
| ret = mlx5_cmd_force_teardown_hca(dev); |
| if (!ret) |
| goto succeed; |
| |
| mlx5_core_dbg(dev, "Firmware couldn't do fast unload error: %d\n", ret); |
| mlx5_start_health_poll(dev); |
| return ret; |
| |
| succeed: |
| mlx5_enter_error_state(dev, true); |
| |
| /* Some platforms requiring freeing the IRQ's in the shutdown |
| * flow. If they aren't freed they can't be allocated after |
| * kexec. There is no need to cleanup the mlx5_core software |
| * contexts. |
| */ |
| mlx5_core_eq_free_irqs(dev); |
| |
| return 0; |
| } |
| |
| static void shutdown(struct pci_dev *pdev) |
| { |
| struct mlx5_core_dev *dev = pci_get_drvdata(pdev); |
| struct mlx5_priv *priv = &dev->priv; |
| int err; |
| |
| dev_info(&pdev->dev, "Shutdown was called\n"); |
| err = mlx5_try_fast_unload(dev); |
| if (err) |
| mlx5_unload_one(dev, priv, false); |
| mlx5_pci_disable_device(dev); |
| } |
| |
| static const struct pci_device_id mlx5_core_pci_table[] = { |
| { PCI_VDEVICE(MELLANOX, PCI_DEVICE_ID_MELLANOX_CONNECTIB) }, |
| { PCI_VDEVICE(MELLANOX, 0x1012), MLX5_PCI_DEV_IS_VF}, /* Connect-IB VF */ |
| { PCI_VDEVICE(MELLANOX, PCI_DEVICE_ID_MELLANOX_CONNECTX4) }, |
| { PCI_VDEVICE(MELLANOX, 0x1014), MLX5_PCI_DEV_IS_VF}, /* ConnectX-4 VF */ |
| { PCI_VDEVICE(MELLANOX, PCI_DEVICE_ID_MELLANOX_CONNECTX4_LX) }, |
| { PCI_VDEVICE(MELLANOX, 0x1016), MLX5_PCI_DEV_IS_VF}, /* ConnectX-4LX VF */ |
| { PCI_VDEVICE(MELLANOX, 0x1017) }, /* ConnectX-5, PCIe 3.0 */ |
| { PCI_VDEVICE(MELLANOX, 0x1018), MLX5_PCI_DEV_IS_VF}, /* ConnectX-5 VF */ |
| { PCI_VDEVICE(MELLANOX, 0x1019) }, /* ConnectX-5 Ex */ |
| { PCI_VDEVICE(MELLANOX, 0x101a), MLX5_PCI_DEV_IS_VF}, /* ConnectX-5 Ex VF */ |
| { PCI_VDEVICE(MELLANOX, 0x101b) }, /* ConnectX-6 */ |
| { PCI_VDEVICE(MELLANOX, 0x101c), MLX5_PCI_DEV_IS_VF}, /* ConnectX-6 VF */ |
| { PCI_VDEVICE(MELLANOX, 0xa2d2) }, /* BlueField integrated ConnectX-5 network controller */ |
| { PCI_VDEVICE(MELLANOX, 0xa2d3), MLX5_PCI_DEV_IS_VF}, /* BlueField integrated ConnectX-5 network controller VF */ |
| { 0, } |
| }; |
| |
| MODULE_DEVICE_TABLE(pci, mlx5_core_pci_table); |
| |
| void mlx5_disable_device(struct mlx5_core_dev *dev) |
| { |
| mlx5_pci_err_detected(dev->pdev, 0); |
| } |
| |
| void mlx5_recover_device(struct mlx5_core_dev *dev) |
| { |
| mlx5_pci_disable_device(dev); |
| if (mlx5_pci_slot_reset(dev->pdev) == PCI_ERS_RESULT_RECOVERED) |
| mlx5_pci_resume(dev->pdev); |
| } |
| |
| static struct pci_driver mlx5_core_driver = { |
| .name = DRIVER_NAME, |
| .id_table = mlx5_core_pci_table, |
| .probe = init_one, |
| .remove = remove_one, |
| .shutdown = shutdown, |
| .err_handler = &mlx5_err_handler, |
| .sriov_configure = mlx5_core_sriov_configure, |
| }; |
| |
| static void mlx5_core_verify_params(void) |
| { |
| if (prof_sel >= ARRAY_SIZE(profile)) { |
| pr_warn("mlx5_core: WARNING: Invalid module parameter prof_sel %d, valid range 0-%zu, changing back to default(%d)\n", |
| prof_sel, |
| ARRAY_SIZE(profile) - 1, |
| MLX5_DEFAULT_PROF); |
| prof_sel = MLX5_DEFAULT_PROF; |
| } |
| } |
| |
| static int __init init(void) |
| { |
| int err; |
| |
| get_random_bytes(&sw_owner_id, sizeof(sw_owner_id)); |
| |
| mlx5_core_verify_params(); |
| mlx5_fpga_ipsec_build_fs_cmds(); |
| mlx5_register_debugfs(); |
| |
| err = pci_register_driver(&mlx5_core_driver); |
| if (err) |
| goto err_debug; |
| |
| #ifdef CONFIG_MLX5_CORE_EN |
| mlx5e_init(); |
| #endif |
| |
| return 0; |
| |
| err_debug: |
| mlx5_unregister_debugfs(); |
| return err; |
| } |
| |
| static void __exit cleanup(void) |
| { |
| #ifdef CONFIG_MLX5_CORE_EN |
| mlx5e_cleanup(); |
| #endif |
| pci_unregister_driver(&mlx5_core_driver); |
| mlx5_unregister_debugfs(); |
| } |
| |
| module_init(init); |
| module_exit(cleanup); |