| /* SPDX-License-Identifier: GPL-2.0 */ |
| |
| /* Copyright (c) 2012-2018, The Linux Foundation. All rights reserved. |
| * Copyright (C) 2019-2020 Linaro Ltd. |
| */ |
| #ifndef _IPA_CMD_H_ |
| #define _IPA_CMD_H_ |
| |
| #include <linux/types.h> |
| #include <linux/dma-direction.h> |
| |
| struct sk_buff; |
| struct scatterlist; |
| |
| struct ipa; |
| struct ipa_mem; |
| struct gsi_trans; |
| struct gsi_channel; |
| |
| /** |
| * enum ipa_cmd_opcode: IPA immediate commands |
| * |
| * @IPA_CMD_IP_V4_FILTER_INIT: Initialize IPv4 filter table |
| * @IPA_CMD_IP_V6_FILTER_INIT: Initialize IPv6 filter table |
| * @IPA_CMD_IP_V4_ROUTING_INIT: Initialize IPv4 routing table |
| * @IPA_CMD_IP_V6_ROUTING_INIT: Initialize IPv6 routing table |
| * @IPA_CMD_HDR_INIT_LOCAL: Initialize IPA-local header memory |
| * @IPA_CMD_REGISTER_WRITE: Register write performed by IPA |
| * @IPA_CMD_IP_PACKET_INIT: Set up next packet's destination endpoint |
| * @IPA_CMD_DMA_SHARED_MEM: DMA command performed by IPA |
| * @IPA_CMD_IP_PACKET_TAG_STATUS: Have next packet generate tag * status |
| * @IPA_CMD_NONE: Special (invalid) "not a command" value |
| * |
| * All immediate commands are issued using the AP command TX endpoint. |
| */ |
| enum ipa_cmd_opcode { |
| IPA_CMD_NONE = 0x0, |
| IPA_CMD_IP_V4_FILTER_INIT = 0x3, |
| IPA_CMD_IP_V6_FILTER_INIT = 0x4, |
| IPA_CMD_IP_V4_ROUTING_INIT = 0x7, |
| IPA_CMD_IP_V6_ROUTING_INIT = 0x8, |
| IPA_CMD_HDR_INIT_LOCAL = 0x9, |
| IPA_CMD_REGISTER_WRITE = 0xc, |
| IPA_CMD_IP_PACKET_INIT = 0x10, |
| IPA_CMD_DMA_SHARED_MEM = 0x13, |
| IPA_CMD_IP_PACKET_TAG_STATUS = 0x14, |
| }; |
| |
| /** |
| * struct ipa_cmd_info - information needed for an IPA immediate command |
| * |
| * @opcode: The command opcode. |
| * @direction: Direction of data transfer for DMA commands |
| */ |
| struct ipa_cmd_info { |
| enum ipa_cmd_opcode opcode; |
| enum dma_data_direction direction; |
| }; |
| |
| #ifdef IPA_VALIDATE |
| |
| /** |
| * ipa_cmd_table_valid() - Validate a memory region holding a table |
| * @ipa: - IPA pointer |
| * @mem: - IPA memory region descriptor |
| * @route: - Whether the region holds a route or filter table |
| * @ipv6: - Whether the table is for IPv6 or IPv4 |
| * @hashed: - Whether the table is hashed or non-hashed |
| * |
| * Return: true if region is valid, false otherwise |
| */ |
| bool ipa_cmd_table_valid(struct ipa *ipa, const struct ipa_mem *mem, |
| bool route, bool ipv6, bool hashed); |
| |
| /** |
| * ipa_cmd_data_valid() - Validate command-realted configuration is valid |
| * @ipa: - IPA pointer |
| * |
| * Return: true if assumptions required for command are valid |
| */ |
| bool ipa_cmd_data_valid(struct ipa *ipa); |
| |
| #else /* !IPA_VALIDATE */ |
| |
| static inline bool ipa_cmd_table_valid(struct ipa *ipa, |
| const struct ipa_mem *mem, bool route, |
| bool ipv6, bool hashed) |
| { |
| return true; |
| } |
| |
| static inline bool ipa_cmd_data_valid(struct ipa *ipa) |
| { |
| return true; |
| } |
| |
| #endif /* !IPA_VALIDATE */ |
| |
| /** |
| * ipa_cmd_pool_init() - initialize command channel pools |
| * @channel: AP->IPA command TX GSI channel pointer |
| * @tre_count: Number of pool elements to allocate |
| * |
| * Return: 0 if successful, or a negative error code |
| */ |
| int ipa_cmd_pool_init(struct gsi_channel *channel, u32 tre_count); |
| |
| /** |
| * ipa_cmd_pool_exit() - Inverse of ipa_cmd_pool_init() |
| * @channel: AP->IPA command TX GSI channel pointer |
| */ |
| void ipa_cmd_pool_exit(struct gsi_channel *channel); |
| |
| /** |
| * ipa_cmd_table_init_add() - Add table init command to a transaction |
| * @trans: GSI transaction |
| * @opcode: IPA immediate command opcode |
| * @size: Size of non-hashed routing table memory |
| * @offset: Offset in IPA shared memory of non-hashed routing table memory |
| * @addr: DMA address of non-hashed table data to write |
| * @hash_size: Size of hashed routing table memory |
| * @hash_offset: Offset in IPA shared memory of hashed routing table memory |
| * @hash_addr: DMA address of hashed table data to write |
| * |
| * If hash_size is 0, hash_offset and hash_addr are ignored. |
| */ |
| void ipa_cmd_table_init_add(struct gsi_trans *trans, enum ipa_cmd_opcode opcode, |
| u16 size, u32 offset, dma_addr_t addr, |
| u16 hash_size, u32 hash_offset, |
| dma_addr_t hash_addr); |
| |
| /** |
| * ipa_cmd_hdr_init_local_add() - Add a header init command to a transaction |
| * @trans: GSI transaction |
| * @offset: Offset of header memory in IPA local space |
| * @size: Size of header memory |
| * @addr: DMA address of buffer to be written from |
| * |
| * Defines and fills the location in IPA memory to use for headers. |
| */ |
| void ipa_cmd_hdr_init_local_add(struct gsi_trans *trans, u32 offset, u16 size, |
| dma_addr_t addr); |
| |
| /** |
| * ipa_cmd_register_write_add() - Add a register write command to a transaction |
| * @trans: GSI transaction |
| * @offset: Offset of register to be written |
| * @value: Value to be written |
| * @mask: Mask of bits in register to update with bits from value |
| * @clear_full: Pipeline clear option; true means full pipeline clear |
| */ |
| void ipa_cmd_register_write_add(struct gsi_trans *trans, u32 offset, u32 value, |
| u32 mask, bool clear_full); |
| |
| /** |
| * ipa_cmd_dma_shared_mem_add() - Add a DMA memory command to a transaction |
| * @trans: GSI transaction |
| * @offset: Offset of IPA memory to be read or written |
| * @size: Number of bytes of memory to be transferred |
| * @addr: DMA address of buffer to be read into or written from |
| * @toward_ipa: true means write to IPA memory; false means read |
| */ |
| void ipa_cmd_dma_shared_mem_add(struct gsi_trans *trans, u32 offset, |
| u16 size, dma_addr_t addr, bool toward_ipa); |
| |
| /** |
| * ipa_cmd_pipeline_clear_add() - Add pipeline clear commands to a transaction |
| * @trans: GSI transaction |
| */ |
| void ipa_cmd_pipeline_clear_add(struct gsi_trans *trans); |
| |
| /** |
| * ipa_cmd_pipeline_clear_count() - # commands required to clear pipeline |
| * |
| * Return: The number of elements to allocate in a transaction |
| * to hold commands to clear the pipeline |
| */ |
| u32 ipa_cmd_pipeline_clear_count(void); |
| |
| /** |
| * ipa_cmd_pipeline_clear_wait() - Wait pipeline clear to complete |
| * @ipa: - IPA pointer |
| */ |
| void ipa_cmd_pipeline_clear_wait(struct ipa *ipa); |
| |
| /** |
| * ipa_cmd_pipeline_clear() - Clear the hardware pipeline |
| * @ipa: - IPA pointer |
| */ |
| void ipa_cmd_pipeline_clear(struct ipa *ipa); |
| |
| /** |
| * ipa_cmd_trans_alloc() - Allocate a transaction for the command TX endpoint |
| * @ipa: IPA pointer |
| * @tre_count: Number of elements in the transaction |
| * |
| * Return: A GSI transaction structure, or a null pointer if all |
| * available transactions are in use |
| */ |
| struct gsi_trans *ipa_cmd_trans_alloc(struct ipa *ipa, u32 tre_count); |
| |
| #endif /* _IPA_CMD_H_ */ |