| // SPDX-License-Identifier: GPL-2.0-only |
| /*************************************************************************** |
| * Copyright (C) 2010-2012 by Bruno Prémont <bonbons@linux-vserver.org> * |
| * * |
| * Based on Logitech G13 driver (v0.4) * |
| * Copyright (C) 2009 by Rick L. Vinyard, Jr. <rvinyard@cs.nmsu.edu> * |
| * * |
| ***************************************************************************/ |
| |
| #include <linux/hid.h> |
| #include <linux/vmalloc.h> |
| |
| #include <linux/fb.h> |
| #include <linux/module.h> |
| |
| #include "hid-picolcd.h" |
| |
| /* Framebuffer |
| * |
| * The PicoLCD use a Topway LCD module of 256x64 pixel |
| * This display area is tiled over 4 controllers with 8 tiles |
| * each. Each tile has 8x64 pixel, each data byte representing |
| * a 1-bit wide vertical line of the tile. |
| * |
| * The display can be updated at a tile granularity. |
| * |
| * Chip 1 Chip 2 Chip 3 Chip 4 |
| * +----------------+----------------+----------------+----------------+ |
| * | Tile 1 | Tile 1 | Tile 1 | Tile 1 | |
| * +----------------+----------------+----------------+----------------+ |
| * | Tile 2 | Tile 2 | Tile 2 | Tile 2 | |
| * +----------------+----------------+----------------+----------------+ |
| * ... |
| * +----------------+----------------+----------------+----------------+ |
| * | Tile 8 | Tile 8 | Tile 8 | Tile 8 | |
| * +----------------+----------------+----------------+----------------+ |
| */ |
| #define PICOLCDFB_NAME "picolcdfb" |
| #define PICOLCDFB_WIDTH (256) |
| #define PICOLCDFB_HEIGHT (64) |
| #define PICOLCDFB_SIZE (PICOLCDFB_WIDTH * PICOLCDFB_HEIGHT / 8) |
| |
| #define PICOLCDFB_UPDATE_RATE_LIMIT 10 |
| #define PICOLCDFB_UPDATE_RATE_DEFAULT 2 |
| |
| /* Framebuffer visual structures */ |
| static const struct fb_fix_screeninfo picolcdfb_fix = { |
| .id = PICOLCDFB_NAME, |
| .type = FB_TYPE_PACKED_PIXELS, |
| .visual = FB_VISUAL_MONO01, |
| .xpanstep = 0, |
| .ypanstep = 0, |
| .ywrapstep = 0, |
| .line_length = PICOLCDFB_WIDTH / 8, |
| .accel = FB_ACCEL_NONE, |
| }; |
| |
| static const struct fb_var_screeninfo picolcdfb_var = { |
| .xres = PICOLCDFB_WIDTH, |
| .yres = PICOLCDFB_HEIGHT, |
| .xres_virtual = PICOLCDFB_WIDTH, |
| .yres_virtual = PICOLCDFB_HEIGHT, |
| .width = 103, |
| .height = 26, |
| .bits_per_pixel = 1, |
| .grayscale = 1, |
| .red = { |
| .offset = 0, |
| .length = 1, |
| .msb_right = 0, |
| }, |
| .green = { |
| .offset = 0, |
| .length = 1, |
| .msb_right = 0, |
| }, |
| .blue = { |
| .offset = 0, |
| .length = 1, |
| .msb_right = 0, |
| }, |
| .transp = { |
| .offset = 0, |
| .length = 0, |
| .msb_right = 0, |
| }, |
| }; |
| |
| /* Send a given tile to PicoLCD */ |
| static int picolcd_fb_send_tile(struct picolcd_data *data, u8 *vbitmap, |
| int chip, int tile) |
| { |
| struct hid_report *report1, *report2; |
| unsigned long flags; |
| u8 *tdata; |
| int i; |
| |
| report1 = picolcd_out_report(REPORT_LCD_CMD_DATA, data->hdev); |
| if (!report1 || report1->maxfield != 1) |
| return -ENODEV; |
| report2 = picolcd_out_report(REPORT_LCD_DATA, data->hdev); |
| if (!report2 || report2->maxfield != 1) |
| return -ENODEV; |
| |
| spin_lock_irqsave(&data->lock, flags); |
| if ((data->status & PICOLCD_FAILED)) { |
| spin_unlock_irqrestore(&data->lock, flags); |
| return -ENODEV; |
| } |
| hid_set_field(report1->field[0], 0, chip << 2); |
| hid_set_field(report1->field[0], 1, 0x02); |
| hid_set_field(report1->field[0], 2, 0x00); |
| hid_set_field(report1->field[0], 3, 0x00); |
| hid_set_field(report1->field[0], 4, 0xb8 | tile); |
| hid_set_field(report1->field[0], 5, 0x00); |
| hid_set_field(report1->field[0], 6, 0x00); |
| hid_set_field(report1->field[0], 7, 0x40); |
| hid_set_field(report1->field[0], 8, 0x00); |
| hid_set_field(report1->field[0], 9, 0x00); |
| hid_set_field(report1->field[0], 10, 32); |
| |
| hid_set_field(report2->field[0], 0, (chip << 2) | 0x01); |
| hid_set_field(report2->field[0], 1, 0x00); |
| hid_set_field(report2->field[0], 2, 0x00); |
| hid_set_field(report2->field[0], 3, 32); |
| |
| tdata = vbitmap + (tile * 4 + chip) * 64; |
| for (i = 0; i < 64; i++) |
| if (i < 32) |
| hid_set_field(report1->field[0], 11 + i, tdata[i]); |
| else |
| hid_set_field(report2->field[0], 4 + i - 32, tdata[i]); |
| |
| hid_hw_request(data->hdev, report1, HID_REQ_SET_REPORT); |
| hid_hw_request(data->hdev, report2, HID_REQ_SET_REPORT); |
| spin_unlock_irqrestore(&data->lock, flags); |
| return 0; |
| } |
| |
| /* Translate a single tile*/ |
| static int picolcd_fb_update_tile(u8 *vbitmap, const u8 *bitmap, int bpp, |
| int chip, int tile) |
| { |
| int i, b, changed = 0; |
| u8 tdata[64]; |
| u8 *vdata = vbitmap + (tile * 4 + chip) * 64; |
| |
| if (bpp == 1) { |
| for (b = 7; b >= 0; b--) { |
| const u8 *bdata = bitmap + tile * 256 + chip * 8 + b * 32; |
| for (i = 0; i < 64; i++) { |
| tdata[i] <<= 1; |
| tdata[i] |= (bdata[i/8] >> (i % 8)) & 0x01; |
| } |
| } |
| } else if (bpp == 8) { |
| for (b = 7; b >= 0; b--) { |
| const u8 *bdata = bitmap + (tile * 256 + chip * 8 + b * 32) * 8; |
| for (i = 0; i < 64; i++) { |
| tdata[i] <<= 1; |
| tdata[i] |= (bdata[i] & 0x80) ? 0x01 : 0x00; |
| } |
| } |
| } else { |
| /* Oops, we should never get here! */ |
| WARN_ON(1); |
| return 0; |
| } |
| |
| for (i = 0; i < 64; i++) |
| if (tdata[i] != vdata[i]) { |
| changed = 1; |
| vdata[i] = tdata[i]; |
| } |
| return changed; |
| } |
| |
| void picolcd_fb_refresh(struct picolcd_data *data) |
| { |
| if (data->fb_info) |
| schedule_delayed_work(&data->fb_info->deferred_work, 0); |
| } |
| |
| /* Reconfigure LCD display */ |
| int picolcd_fb_reset(struct picolcd_data *data, int clear) |
| { |
| struct hid_report *report = picolcd_out_report(REPORT_LCD_CMD, data->hdev); |
| struct picolcd_fb_data *fbdata = data->fb_info->par; |
| int i, j; |
| unsigned long flags; |
| static const u8 mapcmd[8] = { 0x00, 0x02, 0x00, 0x64, 0x3f, 0x00, 0x64, 0xc0 }; |
| |
| if (!report || report->maxfield != 1) |
| return -ENODEV; |
| |
| spin_lock_irqsave(&data->lock, flags); |
| for (i = 0; i < 4; i++) { |
| for (j = 0; j < report->field[0]->maxusage; j++) |
| if (j == 0) |
| hid_set_field(report->field[0], j, i << 2); |
| else if (j < sizeof(mapcmd)) |
| hid_set_field(report->field[0], j, mapcmd[j]); |
| else |
| hid_set_field(report->field[0], j, 0); |
| hid_hw_request(data->hdev, report, HID_REQ_SET_REPORT); |
| } |
| spin_unlock_irqrestore(&data->lock, flags); |
| |
| if (clear) { |
| memset(fbdata->vbitmap, 0, PICOLCDFB_SIZE); |
| memset(fbdata->bitmap, 0, PICOLCDFB_SIZE*fbdata->bpp); |
| } |
| fbdata->force = 1; |
| |
| /* schedule first output of framebuffer */ |
| if (fbdata->ready) |
| schedule_delayed_work(&data->fb_info->deferred_work, 0); |
| else |
| fbdata->ready = 1; |
| |
| return 0; |
| } |
| |
| /* Update fb_vbitmap from the screen_buffer and send changed tiles to device */ |
| static void picolcd_fb_update(struct fb_info *info) |
| { |
| int chip, tile, n; |
| unsigned long flags; |
| struct picolcd_fb_data *fbdata = info->par; |
| struct picolcd_data *data; |
| |
| mutex_lock(&info->lock); |
| |
| spin_lock_irqsave(&fbdata->lock, flags); |
| if (!fbdata->ready && fbdata->picolcd) |
| picolcd_fb_reset(fbdata->picolcd, 0); |
| spin_unlock_irqrestore(&fbdata->lock, flags); |
| |
| /* |
| * Translate the framebuffer into the format needed by the PicoLCD. |
| * See display layout above. |
| * Do this one tile after the other and push those tiles that changed. |
| * |
| * Wait for our IO to complete as otherwise we might flood the queue! |
| */ |
| n = 0; |
| for (chip = 0; chip < 4; chip++) |
| for (tile = 0; tile < 8; tile++) { |
| if (!fbdata->force && !picolcd_fb_update_tile( |
| fbdata->vbitmap, fbdata->bitmap, |
| fbdata->bpp, chip, tile)) |
| continue; |
| n += 2; |
| if (n >= HID_OUTPUT_FIFO_SIZE / 2) { |
| spin_lock_irqsave(&fbdata->lock, flags); |
| data = fbdata->picolcd; |
| spin_unlock_irqrestore(&fbdata->lock, flags); |
| mutex_unlock(&info->lock); |
| if (!data) |
| return; |
| hid_hw_wait(data->hdev); |
| mutex_lock(&info->lock); |
| n = 0; |
| } |
| spin_lock_irqsave(&fbdata->lock, flags); |
| data = fbdata->picolcd; |
| spin_unlock_irqrestore(&fbdata->lock, flags); |
| if (!data || picolcd_fb_send_tile(data, |
| fbdata->vbitmap, chip, tile)) |
| goto out; |
| } |
| fbdata->force = false; |
| if (n) { |
| spin_lock_irqsave(&fbdata->lock, flags); |
| data = fbdata->picolcd; |
| spin_unlock_irqrestore(&fbdata->lock, flags); |
| mutex_unlock(&info->lock); |
| if (data) |
| hid_hw_wait(data->hdev); |
| return; |
| } |
| out: |
| mutex_unlock(&info->lock); |
| } |
| |
| static int picolcd_fb_blank(int blank, struct fb_info *info) |
| { |
| /* We let fb notification do this for us via lcd/backlight device */ |
| return 0; |
| } |
| |
| static void picolcd_fb_destroy(struct fb_info *info) |
| { |
| struct picolcd_fb_data *fbdata = info->par; |
| |
| /* make sure no work is deferred */ |
| fb_deferred_io_cleanup(info); |
| |
| /* No thridparty should ever unregister our framebuffer! */ |
| WARN_ON(fbdata->picolcd != NULL); |
| |
| vfree((u8 *)info->fix.smem_start); |
| framebuffer_release(info); |
| } |
| |
| static int picolcd_fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) |
| { |
| __u32 bpp = var->bits_per_pixel; |
| __u32 activate = var->activate; |
| |
| /* only allow 1/8 bit depth (8-bit is grayscale) */ |
| *var = picolcdfb_var; |
| var->activate = activate; |
| if (bpp >= 8) { |
| var->bits_per_pixel = 8; |
| var->red.length = 8; |
| var->green.length = 8; |
| var->blue.length = 8; |
| } else { |
| var->bits_per_pixel = 1; |
| var->red.length = 1; |
| var->green.length = 1; |
| var->blue.length = 1; |
| } |
| return 0; |
| } |
| |
| static int picolcd_set_par(struct fb_info *info) |
| { |
| struct picolcd_fb_data *fbdata = info->par; |
| u8 *tmp_fb, *o_fb; |
| if (info->var.bits_per_pixel == fbdata->bpp) |
| return 0; |
| /* switch between 1/8 bit depths */ |
| if (info->var.bits_per_pixel != 1 && info->var.bits_per_pixel != 8) |
| return -EINVAL; |
| |
| o_fb = fbdata->bitmap; |
| tmp_fb = kmalloc_array(PICOLCDFB_SIZE, info->var.bits_per_pixel, |
| GFP_KERNEL); |
| if (!tmp_fb) |
| return -ENOMEM; |
| |
| /* translate FB content to new bits-per-pixel */ |
| if (info->var.bits_per_pixel == 1) { |
| int i, b; |
| for (i = 0; i < PICOLCDFB_SIZE; i++) { |
| u8 p = 0; |
| for (b = 0; b < 8; b++) { |
| p <<= 1; |
| p |= o_fb[i*8+b] ? 0x01 : 0x00; |
| } |
| tmp_fb[i] = p; |
| } |
| memcpy(o_fb, tmp_fb, PICOLCDFB_SIZE); |
| info->fix.visual = FB_VISUAL_MONO01; |
| info->fix.line_length = PICOLCDFB_WIDTH / 8; |
| } else { |
| int i; |
| memcpy(tmp_fb, o_fb, PICOLCDFB_SIZE); |
| for (i = 0; i < PICOLCDFB_SIZE * 8; i++) |
| o_fb[i] = tmp_fb[i/8] & (0x01 << (7 - i % 8)) ? 0xff : 0x00; |
| info->fix.visual = FB_VISUAL_DIRECTCOLOR; |
| info->fix.line_length = PICOLCDFB_WIDTH; |
| } |
| |
| kfree(tmp_fb); |
| fbdata->bpp = info->var.bits_per_pixel; |
| return 0; |
| } |
| |
| static void picolcdfb_ops_damage_range(struct fb_info *info, off_t off, size_t len) |
| { |
| if (!info->par) |
| return; |
| schedule_delayed_work(&info->deferred_work, 0); |
| } |
| |
| static void picolcdfb_ops_damage_area(struct fb_info *info, u32 x, u32 y, u32 width, u32 height) |
| { |
| if (!info->par) |
| return; |
| schedule_delayed_work(&info->deferred_work, 0); |
| } |
| |
| FB_GEN_DEFAULT_DEFERRED_SYSMEM_OPS(picolcdfb_ops, |
| picolcdfb_ops_damage_range, |
| picolcdfb_ops_damage_area) |
| |
| static const struct fb_ops picolcdfb_ops = { |
| .owner = THIS_MODULE, |
| FB_DEFAULT_DEFERRED_OPS(picolcdfb_ops), |
| .fb_destroy = picolcd_fb_destroy, |
| .fb_blank = picolcd_fb_blank, |
| .fb_check_var = picolcd_fb_check_var, |
| .fb_set_par = picolcd_set_par, |
| }; |
| |
| |
| /* Callback from deferred IO workqueue */ |
| static void picolcd_fb_deferred_io(struct fb_info *info, struct list_head *pagereflist) |
| { |
| picolcd_fb_update(info); |
| } |
| |
| static const struct fb_deferred_io picolcd_fb_defio = { |
| .delay = HZ / PICOLCDFB_UPDATE_RATE_DEFAULT, |
| .deferred_io = picolcd_fb_deferred_io, |
| }; |
| |
| |
| /* |
| * The "fb_update_rate" sysfs attribute |
| */ |
| static ssize_t picolcd_fb_update_rate_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct picolcd_data *data = dev_get_drvdata(dev); |
| struct picolcd_fb_data *fbdata = data->fb_info->par; |
| unsigned i, fb_update_rate = fbdata->update_rate; |
| size_t ret = 0; |
| |
| for (i = 1; i <= PICOLCDFB_UPDATE_RATE_LIMIT; i++) |
| if (i == fb_update_rate) |
| ret += sysfs_emit_at(buf, ret, "[%u] ", i); |
| else |
| ret += sysfs_emit_at(buf, ret, "%u ", i); |
| if (ret > 0) |
| buf[min(ret, (size_t)PAGE_SIZE)-1] = '\n'; |
| return ret; |
| } |
| |
| static ssize_t picolcd_fb_update_rate_store(struct device *dev, |
| struct device_attribute *attr, const char *buf, size_t count) |
| { |
| struct picolcd_data *data = dev_get_drvdata(dev); |
| struct picolcd_fb_data *fbdata = data->fb_info->par; |
| int i; |
| unsigned u; |
| |
| if (count < 1 || count > 10) |
| return -EINVAL; |
| |
| i = sscanf(buf, "%u", &u); |
| if (i != 1) |
| return -EINVAL; |
| |
| if (u > PICOLCDFB_UPDATE_RATE_LIMIT) |
| return -ERANGE; |
| else if (u == 0) |
| u = PICOLCDFB_UPDATE_RATE_DEFAULT; |
| |
| fbdata->update_rate = u; |
| data->fb_info->fbdefio->delay = HZ / fbdata->update_rate; |
| return count; |
| } |
| |
| static DEVICE_ATTR(fb_update_rate, 0664, picolcd_fb_update_rate_show, |
| picolcd_fb_update_rate_store); |
| |
| /* initialize Framebuffer device */ |
| int picolcd_init_framebuffer(struct picolcd_data *data) |
| { |
| struct device *dev = &data->hdev->dev; |
| struct fb_info *info = NULL; |
| struct picolcd_fb_data *fbdata = NULL; |
| int i, error = -ENOMEM; |
| u32 *palette; |
| |
| /* The extra memory is: |
| * - 256*u32 for pseudo_palette |
| * - struct fb_deferred_io |
| */ |
| info = framebuffer_alloc(256 * sizeof(u32) + |
| sizeof(struct fb_deferred_io) + |
| sizeof(struct picolcd_fb_data) + |
| PICOLCDFB_SIZE, dev); |
| if (!info) |
| goto err_nomem; |
| |
| info->fbdefio = info->par; |
| *info->fbdefio = picolcd_fb_defio; |
| info->par += sizeof(struct fb_deferred_io); |
| palette = info->par; |
| info->par += 256 * sizeof(u32); |
| for (i = 0; i < 256; i++) |
| palette[i] = i > 0 && i < 16 ? 0xff : 0; |
| info->pseudo_palette = palette; |
| info->fbops = &picolcdfb_ops; |
| info->var = picolcdfb_var; |
| info->fix = picolcdfb_fix; |
| info->fix.smem_len = PICOLCDFB_SIZE*8; |
| |
| #ifdef CONFIG_FB_BACKLIGHT |
| #ifdef CONFIG_HID_PICOLCD_BACKLIGHT |
| info->bl_dev = data->backlight; |
| #endif |
| #endif |
| |
| fbdata = info->par; |
| spin_lock_init(&fbdata->lock); |
| fbdata->picolcd = data; |
| fbdata->update_rate = PICOLCDFB_UPDATE_RATE_DEFAULT; |
| fbdata->bpp = picolcdfb_var.bits_per_pixel; |
| fbdata->force = 1; |
| fbdata->vbitmap = info->par + sizeof(struct picolcd_fb_data); |
| fbdata->bitmap = vmalloc(PICOLCDFB_SIZE*8); |
| if (fbdata->bitmap == NULL) { |
| dev_err(dev, "can't get a free page for framebuffer\n"); |
| goto err_nomem; |
| } |
| info->flags |= FBINFO_VIRTFB; |
| info->screen_buffer = fbdata->bitmap; |
| info->fix.smem_start = (unsigned long)fbdata->bitmap; |
| memset(fbdata->vbitmap, 0xff, PICOLCDFB_SIZE); |
| data->fb_info = info; |
| |
| error = picolcd_fb_reset(data, 1); |
| if (error) { |
| dev_err(dev, "failed to configure display\n"); |
| goto err_cleanup; |
| } |
| |
| error = device_create_file(dev, &dev_attr_fb_update_rate); |
| if (error) { |
| dev_err(dev, "failed to create sysfs attributes\n"); |
| goto err_cleanup; |
| } |
| |
| fb_deferred_io_init(info); |
| error = register_framebuffer(info); |
| if (error) { |
| dev_err(dev, "failed to register framebuffer\n"); |
| goto err_sysfs; |
| } |
| return 0; |
| |
| err_sysfs: |
| device_remove_file(dev, &dev_attr_fb_update_rate); |
| fb_deferred_io_cleanup(info); |
| err_cleanup: |
| data->fb_info = NULL; |
| |
| err_nomem: |
| if (fbdata) |
| vfree(fbdata->bitmap); |
| framebuffer_release(info); |
| return error; |
| } |
| |
| void picolcd_exit_framebuffer(struct picolcd_data *data) |
| { |
| struct fb_info *info = data->fb_info; |
| struct picolcd_fb_data *fbdata; |
| unsigned long flags; |
| |
| if (!info) |
| return; |
| |
| device_remove_file(&data->hdev->dev, &dev_attr_fb_update_rate); |
| fbdata = info->par; |
| |
| /* disconnect framebuffer from HID dev */ |
| spin_lock_irqsave(&fbdata->lock, flags); |
| fbdata->picolcd = NULL; |
| spin_unlock_irqrestore(&fbdata->lock, flags); |
| |
| /* make sure there is no running update - thus that fbdata->picolcd |
| * once obtained under lock is guaranteed not to get free() under |
| * the feet of the deferred work */ |
| flush_delayed_work(&info->deferred_work); |
| |
| data->fb_info = NULL; |
| unregister_framebuffer(info); |
| } |