| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Driver for NXP PN533 NFC Chip - USB transport layer |
| * |
| * Copyright (C) 2011 Instituto Nokia de Tecnologia |
| * Copyright (C) 2012-2013 Tieto Poland |
| */ |
| |
| #include <linux/device.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/usb.h> |
| #include <linux/nfc.h> |
| #include <linux/netdevice.h> |
| #include <net/nfc/nfc.h> |
| #include "pn533.h" |
| |
| #define VERSION "0.1" |
| |
| #define PN533_VENDOR_ID 0x4CC |
| #define PN533_PRODUCT_ID 0x2533 |
| |
| #define SCM_VENDOR_ID 0x4E6 |
| #define SCL3711_PRODUCT_ID 0x5591 |
| |
| #define SONY_VENDOR_ID 0x054c |
| #define PASORI_PRODUCT_ID 0x02e1 |
| |
| #define ACS_VENDOR_ID 0x072f |
| #define ACR122U_PRODUCT_ID 0x2200 |
| |
| static const struct usb_device_id pn533_usb_table[] = { |
| { USB_DEVICE(PN533_VENDOR_ID, PN533_PRODUCT_ID), |
| .driver_info = PN533_DEVICE_STD }, |
| { USB_DEVICE(SCM_VENDOR_ID, SCL3711_PRODUCT_ID), |
| .driver_info = PN533_DEVICE_STD }, |
| { USB_DEVICE(SONY_VENDOR_ID, PASORI_PRODUCT_ID), |
| .driver_info = PN533_DEVICE_PASORI }, |
| { USB_DEVICE(ACS_VENDOR_ID, ACR122U_PRODUCT_ID), |
| .driver_info = PN533_DEVICE_ACR122U }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(usb, pn533_usb_table); |
| |
| struct pn533_usb_phy { |
| struct usb_device *udev; |
| struct usb_interface *interface; |
| |
| struct urb *out_urb; |
| struct urb *in_urb; |
| |
| struct urb *ack_urb; |
| u8 *ack_buffer; |
| |
| struct pn533 *priv; |
| }; |
| |
| static void pn533_recv_response(struct urb *urb) |
| { |
| struct pn533_usb_phy *phy = urb->context; |
| struct sk_buff *skb = NULL; |
| |
| if (!urb->status) { |
| skb = alloc_skb(urb->actual_length, GFP_ATOMIC); |
| if (!skb) { |
| nfc_err(&phy->udev->dev, "failed to alloc memory\n"); |
| } else { |
| skb_put_data(skb, urb->transfer_buffer, |
| urb->actual_length); |
| } |
| } |
| |
| pn533_recv_frame(phy->priv, skb, urb->status); |
| } |
| |
| static int pn533_submit_urb_for_response(struct pn533_usb_phy *phy, gfp_t flags) |
| { |
| phy->in_urb->complete = pn533_recv_response; |
| |
| return usb_submit_urb(phy->in_urb, flags); |
| } |
| |
| static void pn533_recv_ack(struct urb *urb) |
| { |
| struct pn533_usb_phy *phy = urb->context; |
| struct pn533 *priv = phy->priv; |
| struct pn533_cmd *cmd = priv->cmd; |
| struct pn533_std_frame *in_frame; |
| int rc; |
| |
| cmd->status = urb->status; |
| |
| switch (urb->status) { |
| case 0: |
| break; /* success */ |
| case -ECONNRESET: |
| case -ENOENT: |
| dev_dbg(&phy->udev->dev, |
| "The urb has been stopped (status %d)\n", |
| urb->status); |
| goto sched_wq; |
| case -ESHUTDOWN: |
| default: |
| nfc_err(&phy->udev->dev, |
| "Urb failure (status %d)\n", urb->status); |
| goto sched_wq; |
| } |
| |
| in_frame = phy->in_urb->transfer_buffer; |
| |
| if (!pn533_rx_frame_is_ack(in_frame)) { |
| nfc_err(&phy->udev->dev, "Received an invalid ack\n"); |
| cmd->status = -EIO; |
| goto sched_wq; |
| } |
| |
| rc = pn533_submit_urb_for_response(phy, GFP_ATOMIC); |
| if (rc) { |
| nfc_err(&phy->udev->dev, |
| "usb_submit_urb failed with result %d\n", rc); |
| cmd->status = rc; |
| goto sched_wq; |
| } |
| |
| return; |
| |
| sched_wq: |
| queue_work(priv->wq, &priv->cmd_complete_work); |
| } |
| |
| static int pn533_submit_urb_for_ack(struct pn533_usb_phy *phy, gfp_t flags) |
| { |
| phy->in_urb->complete = pn533_recv_ack; |
| |
| return usb_submit_urb(phy->in_urb, flags); |
| } |
| |
| static int pn533_usb_send_ack(struct pn533 *dev, gfp_t flags) |
| { |
| struct pn533_usb_phy *phy = dev->phy; |
| static const u8 ack[6] = {0x00, 0x00, 0xff, 0x00, 0xff, 0x00}; |
| /* spec 7.1.1.3: Preamble, SoPC (2), ACK Code (2), Postamble */ |
| |
| if (!phy->ack_buffer) { |
| phy->ack_buffer = kmemdup(ack, sizeof(ack), flags); |
| if (!phy->ack_buffer) |
| return -ENOMEM; |
| } |
| |
| phy->ack_urb->transfer_buffer = phy->ack_buffer; |
| phy->ack_urb->transfer_buffer_length = sizeof(ack); |
| return usb_submit_urb(phy->ack_urb, flags); |
| } |
| |
| struct pn533_out_arg { |
| struct pn533_usb_phy *phy; |
| struct completion done; |
| }; |
| |
| static int pn533_usb_send_frame(struct pn533 *dev, |
| struct sk_buff *out) |
| { |
| struct pn533_usb_phy *phy = dev->phy; |
| struct pn533_out_arg arg; |
| void *cntx; |
| int rc; |
| |
| if (phy->priv == NULL) |
| phy->priv = dev; |
| |
| phy->out_urb->transfer_buffer = out->data; |
| phy->out_urb->transfer_buffer_length = out->len; |
| |
| print_hex_dump_debug("PN533 TX: ", DUMP_PREFIX_NONE, 16, 1, |
| out->data, out->len, false); |
| |
| arg.phy = phy; |
| init_completion(&arg.done); |
| cntx = phy->out_urb->context; |
| phy->out_urb->context = &arg; |
| |
| rc = usb_submit_urb(phy->out_urb, GFP_KERNEL); |
| if (rc) |
| return rc; |
| |
| wait_for_completion(&arg.done); |
| phy->out_urb->context = cntx; |
| |
| if (dev->protocol_type == PN533_PROTO_REQ_RESP) { |
| /* request for response for sent packet directly */ |
| rc = pn533_submit_urb_for_response(phy, GFP_KERNEL); |
| if (rc) |
| goto error; |
| } else if (dev->protocol_type == PN533_PROTO_REQ_ACK_RESP) { |
| /* request for ACK if that's the case */ |
| rc = pn533_submit_urb_for_ack(phy, GFP_KERNEL); |
| if (rc) |
| goto error; |
| } |
| |
| return 0; |
| |
| error: |
| usb_unlink_urb(phy->out_urb); |
| return rc; |
| } |
| |
| static void pn533_usb_abort_cmd(struct pn533 *dev, gfp_t flags) |
| { |
| struct pn533_usb_phy *phy = dev->phy; |
| |
| /* ACR122U does not support any command which aborts last |
| * issued command i.e. as ACK for standard PN533. Additionally, |
| * it behaves stange, sending broken or incorrect responses, |
| * when we cancel urb before the chip will send response. |
| */ |
| if (dev->device_type == PN533_DEVICE_ACR122U) |
| return; |
| |
| /* An ack will cancel the last issued command */ |
| pn533_usb_send_ack(dev, flags); |
| |
| /* cancel the urb request */ |
| usb_kill_urb(phy->in_urb); |
| } |
| |
| /* ACR122 specific structs and functions */ |
| |
| /* ACS ACR122 pn533 frame definitions */ |
| #define PN533_ACR122_TX_FRAME_HEADER_LEN (sizeof(struct pn533_acr122_tx_frame) \ |
| + 2) |
| #define PN533_ACR122_TX_FRAME_TAIL_LEN 0 |
| #define PN533_ACR122_RX_FRAME_HEADER_LEN (sizeof(struct pn533_acr122_rx_frame) \ |
| + 2) |
| #define PN533_ACR122_RX_FRAME_TAIL_LEN 2 |
| #define PN533_ACR122_FRAME_MAX_PAYLOAD_LEN PN533_STD_FRAME_MAX_PAYLOAD_LEN |
| |
| /* CCID messages types */ |
| #define PN533_ACR122_PC_TO_RDR_ICCPOWERON 0x62 |
| #define PN533_ACR122_PC_TO_RDR_ESCAPE 0x6B |
| |
| #define PN533_ACR122_RDR_TO_PC_ESCAPE 0x83 |
| |
| |
| struct pn533_acr122_ccid_hdr { |
| u8 type; |
| u32 datalen; |
| u8 slot; |
| u8 seq; |
| |
| /* |
| * 3 msg specific bytes or status, error and 1 specific |
| * byte for reposnse msg |
| */ |
| u8 params[3]; |
| } __packed; |
| |
| struct pn533_acr122_apdu_hdr { |
| u8 class; |
| u8 ins; |
| u8 p1; |
| u8 p2; |
| } __packed; |
| |
| struct pn533_acr122_tx_frame { |
| struct pn533_acr122_ccid_hdr ccid; |
| struct pn533_acr122_apdu_hdr apdu; |
| u8 datalen; |
| u8 data[]; /* pn533 frame: TFI ... */ |
| } __packed; |
| |
| struct pn533_acr122_rx_frame { |
| struct pn533_acr122_ccid_hdr ccid; |
| u8 data[]; /* pn533 frame : TFI ... */ |
| } __packed; |
| |
| static void pn533_acr122_tx_frame_init(void *_frame, u8 cmd_code) |
| { |
| struct pn533_acr122_tx_frame *frame = _frame; |
| |
| frame->ccid.type = PN533_ACR122_PC_TO_RDR_ESCAPE; |
| /* sizeof(apdu_hdr) + sizeof(datalen) */ |
| frame->ccid.datalen = sizeof(frame->apdu) + 1; |
| frame->ccid.slot = 0; |
| frame->ccid.seq = 0; |
| frame->ccid.params[0] = 0; |
| frame->ccid.params[1] = 0; |
| frame->ccid.params[2] = 0; |
| |
| frame->data[0] = PN533_STD_FRAME_DIR_OUT; |
| frame->data[1] = cmd_code; |
| frame->datalen = 2; /* data[0] + data[1] */ |
| |
| frame->apdu.class = 0xFF; |
| frame->apdu.ins = 0; |
| frame->apdu.p1 = 0; |
| frame->apdu.p2 = 0; |
| } |
| |
| static void pn533_acr122_tx_frame_finish(void *_frame) |
| { |
| struct pn533_acr122_tx_frame *frame = _frame; |
| |
| frame->ccid.datalen += frame->datalen; |
| } |
| |
| static void pn533_acr122_tx_update_payload_len(void *_frame, int len) |
| { |
| struct pn533_acr122_tx_frame *frame = _frame; |
| |
| frame->datalen += len; |
| } |
| |
| static bool pn533_acr122_is_rx_frame_valid(void *_frame, struct pn533 *dev) |
| { |
| struct pn533_acr122_rx_frame *frame = _frame; |
| |
| if (frame->ccid.type != 0x83) |
| return false; |
| |
| if (!frame->ccid.datalen) |
| return false; |
| |
| if (frame->data[frame->ccid.datalen - 2] == 0x63) |
| return false; |
| |
| return true; |
| } |
| |
| static int pn533_acr122_rx_frame_size(void *frame) |
| { |
| struct pn533_acr122_rx_frame *f = frame; |
| |
| /* f->ccid.datalen already includes tail length */ |
| return sizeof(struct pn533_acr122_rx_frame) + f->ccid.datalen; |
| } |
| |
| static u8 pn533_acr122_get_cmd_code(void *frame) |
| { |
| struct pn533_acr122_rx_frame *f = frame; |
| |
| return PN533_FRAME_CMD(f); |
| } |
| |
| static struct pn533_frame_ops pn533_acr122_frame_ops = { |
| .tx_frame_init = pn533_acr122_tx_frame_init, |
| .tx_frame_finish = pn533_acr122_tx_frame_finish, |
| .tx_update_payload_len = pn533_acr122_tx_update_payload_len, |
| .tx_header_len = PN533_ACR122_TX_FRAME_HEADER_LEN, |
| .tx_tail_len = PN533_ACR122_TX_FRAME_TAIL_LEN, |
| |
| .rx_is_frame_valid = pn533_acr122_is_rx_frame_valid, |
| .rx_header_len = PN533_ACR122_RX_FRAME_HEADER_LEN, |
| .rx_tail_len = PN533_ACR122_RX_FRAME_TAIL_LEN, |
| .rx_frame_size = pn533_acr122_rx_frame_size, |
| |
| .max_payload_len = PN533_ACR122_FRAME_MAX_PAYLOAD_LEN, |
| .get_cmd_code = pn533_acr122_get_cmd_code, |
| }; |
| |
| struct pn533_acr122_poweron_rdr_arg { |
| int rc; |
| struct completion done; |
| }; |
| |
| static void pn533_acr122_poweron_rdr_resp(struct urb *urb) |
| { |
| struct pn533_acr122_poweron_rdr_arg *arg = urb->context; |
| |
| print_hex_dump_debug("ACR122 RX: ", DUMP_PREFIX_NONE, 16, 1, |
| urb->transfer_buffer, urb->transfer_buffer_length, |
| false); |
| |
| arg->rc = urb->status; |
| complete(&arg->done); |
| } |
| |
| static int pn533_acr122_poweron_rdr(struct pn533_usb_phy *phy) |
| { |
| /* Power on th reader (CCID cmd) */ |
| u8 cmd[10] = {PN533_ACR122_PC_TO_RDR_ICCPOWERON, |
| 0, 0, 0, 0, 0, 0, 3, 0, 0}; |
| char *buffer; |
| int transferred; |
| int rc; |
| void *cntx; |
| struct pn533_acr122_poweron_rdr_arg arg; |
| |
| buffer = kmemdup(cmd, sizeof(cmd), GFP_KERNEL); |
| if (!buffer) |
| return -ENOMEM; |
| |
| init_completion(&arg.done); |
| cntx = phy->in_urb->context; /* backup context */ |
| |
| phy->in_urb->complete = pn533_acr122_poweron_rdr_resp; |
| phy->in_urb->context = &arg; |
| |
| print_hex_dump_debug("ACR122 TX: ", DUMP_PREFIX_NONE, 16, 1, |
| cmd, sizeof(cmd), false); |
| |
| rc = usb_bulk_msg(phy->udev, phy->out_urb->pipe, buffer, sizeof(cmd), |
| &transferred, 5000); |
| kfree(buffer); |
| if (rc || (transferred != sizeof(cmd))) { |
| nfc_err(&phy->udev->dev, |
| "Reader power on cmd error %d\n", rc); |
| return rc; |
| } |
| |
| rc = usb_submit_urb(phy->in_urb, GFP_KERNEL); |
| if (rc) { |
| nfc_err(&phy->udev->dev, |
| "Can't submit reader poweron cmd response %d\n", rc); |
| return rc; |
| } |
| |
| wait_for_completion(&arg.done); |
| phy->in_urb->context = cntx; /* restore context */ |
| |
| return arg.rc; |
| } |
| |
| static void pn533_out_complete(struct urb *urb) |
| { |
| struct pn533_out_arg *arg = urb->context; |
| struct pn533_usb_phy *phy = arg->phy; |
| |
| switch (urb->status) { |
| case 0: |
| break; /* success */ |
| case -ECONNRESET: |
| case -ENOENT: |
| dev_dbg(&phy->udev->dev, |
| "The urb has been stopped (status %d)\n", |
| urb->status); |
| break; |
| case -ESHUTDOWN: |
| default: |
| nfc_err(&phy->udev->dev, |
| "Urb failure (status %d)\n", |
| urb->status); |
| } |
| |
| complete(&arg->done); |
| } |
| |
| static void pn533_ack_complete(struct urb *urb) |
| { |
| struct pn533_usb_phy *phy = urb->context; |
| |
| switch (urb->status) { |
| case 0: |
| break; /* success */ |
| case -ECONNRESET: |
| case -ENOENT: |
| dev_dbg(&phy->udev->dev, |
| "The urb has been stopped (status %d)\n", |
| urb->status); |
| break; |
| case -ESHUTDOWN: |
| default: |
| nfc_err(&phy->udev->dev, |
| "Urb failure (status %d)\n", |
| urb->status); |
| } |
| } |
| |
| static const struct pn533_phy_ops usb_phy_ops = { |
| .send_frame = pn533_usb_send_frame, |
| .send_ack = pn533_usb_send_ack, |
| .abort_cmd = pn533_usb_abort_cmd, |
| }; |
| |
| static int pn533_usb_probe(struct usb_interface *interface, |
| const struct usb_device_id *id) |
| { |
| struct pn533 *priv; |
| struct pn533_usb_phy *phy; |
| struct usb_host_interface *iface_desc; |
| struct usb_endpoint_descriptor *endpoint; |
| int in_endpoint = 0; |
| int out_endpoint = 0; |
| int rc = -ENOMEM; |
| int i; |
| u32 protocols; |
| enum pn533_protocol_type protocol_type = PN533_PROTO_REQ_ACK_RESP; |
| struct pn533_frame_ops *fops = NULL; |
| unsigned char *in_buf; |
| int in_buf_len = PN533_EXT_FRAME_HEADER_LEN + |
| PN533_STD_FRAME_MAX_PAYLOAD_LEN + |
| PN533_STD_FRAME_TAIL_LEN; |
| |
| phy = devm_kzalloc(&interface->dev, sizeof(*phy), GFP_KERNEL); |
| if (!phy) |
| return -ENOMEM; |
| |
| in_buf = kzalloc(in_buf_len, GFP_KERNEL); |
| if (!in_buf) |
| return -ENOMEM; |
| |
| phy->udev = usb_get_dev(interface_to_usbdev(interface)); |
| phy->interface = interface; |
| |
| iface_desc = interface->cur_altsetting; |
| for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { |
| endpoint = &iface_desc->endpoint[i].desc; |
| |
| if (!in_endpoint && usb_endpoint_is_bulk_in(endpoint)) |
| in_endpoint = endpoint->bEndpointAddress; |
| |
| if (!out_endpoint && usb_endpoint_is_bulk_out(endpoint)) |
| out_endpoint = endpoint->bEndpointAddress; |
| } |
| |
| if (!in_endpoint || !out_endpoint) { |
| nfc_err(&interface->dev, |
| "Could not find bulk-in or bulk-out endpoint\n"); |
| rc = -ENODEV; |
| goto error; |
| } |
| |
| phy->in_urb = usb_alloc_urb(0, GFP_KERNEL); |
| phy->out_urb = usb_alloc_urb(0, GFP_KERNEL); |
| phy->ack_urb = usb_alloc_urb(0, GFP_KERNEL); |
| |
| if (!phy->in_urb || !phy->out_urb || !phy->ack_urb) |
| goto error; |
| |
| usb_fill_bulk_urb(phy->in_urb, phy->udev, |
| usb_rcvbulkpipe(phy->udev, in_endpoint), |
| in_buf, in_buf_len, NULL, phy); |
| |
| usb_fill_bulk_urb(phy->out_urb, phy->udev, |
| usb_sndbulkpipe(phy->udev, out_endpoint), |
| NULL, 0, pn533_out_complete, phy); |
| usb_fill_bulk_urb(phy->ack_urb, phy->udev, |
| usb_sndbulkpipe(phy->udev, out_endpoint), |
| NULL, 0, pn533_ack_complete, phy); |
| |
| switch (id->driver_info) { |
| case PN533_DEVICE_STD: |
| protocols = PN533_ALL_PROTOCOLS; |
| break; |
| |
| case PN533_DEVICE_PASORI: |
| protocols = PN533_NO_TYPE_B_PROTOCOLS; |
| break; |
| |
| case PN533_DEVICE_ACR122U: |
| protocols = PN533_NO_TYPE_B_PROTOCOLS; |
| fops = &pn533_acr122_frame_ops; |
| protocol_type = PN533_PROTO_REQ_RESP; |
| |
| rc = pn533_acr122_poweron_rdr(phy); |
| if (rc < 0) { |
| nfc_err(&interface->dev, |
| "Couldn't poweron the reader (error %d)\n", rc); |
| goto error; |
| } |
| break; |
| |
| default: |
| nfc_err(&interface->dev, "Unknown device type %lu\n", |
| id->driver_info); |
| rc = -EINVAL; |
| goto error; |
| } |
| |
| priv = pn53x_common_init(id->driver_info, protocol_type, |
| phy, &usb_phy_ops, fops, |
| &phy->udev->dev); |
| |
| if (IS_ERR(priv)) { |
| rc = PTR_ERR(priv); |
| goto error; |
| } |
| |
| phy->priv = priv; |
| |
| rc = pn533_finalize_setup(priv); |
| if (rc) |
| goto err_clean; |
| |
| usb_set_intfdata(interface, phy); |
| rc = pn53x_register_nfc(priv, protocols, &interface->dev); |
| if (rc) |
| goto err_clean; |
| |
| return 0; |
| |
| err_clean: |
| pn53x_common_clean(priv); |
| error: |
| usb_kill_urb(phy->in_urb); |
| usb_kill_urb(phy->out_urb); |
| usb_kill_urb(phy->ack_urb); |
| |
| usb_free_urb(phy->in_urb); |
| usb_free_urb(phy->out_urb); |
| usb_free_urb(phy->ack_urb); |
| usb_put_dev(phy->udev); |
| kfree(in_buf); |
| kfree(phy->ack_buffer); |
| |
| return rc; |
| } |
| |
| static void pn533_usb_disconnect(struct usb_interface *interface) |
| { |
| struct pn533_usb_phy *phy = usb_get_intfdata(interface); |
| |
| if (!phy) |
| return; |
| |
| pn53x_unregister_nfc(phy->priv); |
| pn53x_common_clean(phy->priv); |
| |
| usb_set_intfdata(interface, NULL); |
| |
| usb_kill_urb(phy->in_urb); |
| usb_kill_urb(phy->out_urb); |
| usb_kill_urb(phy->ack_urb); |
| |
| kfree(phy->in_urb->transfer_buffer); |
| usb_free_urb(phy->in_urb); |
| usb_free_urb(phy->out_urb); |
| usb_free_urb(phy->ack_urb); |
| kfree(phy->ack_buffer); |
| |
| nfc_info(&interface->dev, "NXP PN533 NFC device disconnected\n"); |
| } |
| |
| static struct usb_driver pn533_usb_driver = { |
| .name = "pn533_usb", |
| .probe = pn533_usb_probe, |
| .disconnect = pn533_usb_disconnect, |
| .id_table = pn533_usb_table, |
| }; |
| |
| module_usb_driver(pn533_usb_driver); |
| |
| MODULE_AUTHOR("Lauro Ramos Venancio <lauro.venancio@openbossa.org>"); |
| MODULE_AUTHOR("Aloisio Almeida Jr <aloisio.almeida@openbossa.org>"); |
| MODULE_AUTHOR("Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com>"); |
| MODULE_DESCRIPTION("PN533 USB driver ver " VERSION); |
| MODULE_VERSION(VERSION); |
| MODULE_LICENSE("GPL"); |