| // SPDX-License-Identifier: GPL-2.0+ |
| // |
| // wm831x-isink.c -- Current sink driver for the WM831x series |
| // |
| // Copyright 2009 Wolfson Microelectronics PLC. |
| // |
| // Author: Mark Brown <broonie@opensource.wolfsonmicro.com> |
| |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/init.h> |
| #include <linux/bitops.h> |
| #include <linux/err.h> |
| #include <linux/i2c.h> |
| #include <linux/platform_device.h> |
| #include <linux/regulator/driver.h> |
| #include <linux/slab.h> |
| |
| #include <linux/mfd/wm831x/core.h> |
| #include <linux/mfd/wm831x/regulator.h> |
| #include <linux/mfd/wm831x/pdata.h> |
| |
| #define WM831X_ISINK_MAX_NAME 7 |
| |
| struct wm831x_isink { |
| char name[WM831X_ISINK_MAX_NAME]; |
| struct regulator_desc desc; |
| int reg; |
| struct wm831x *wm831x; |
| struct regulator_dev *regulator; |
| }; |
| |
| static int wm831x_isink_enable(struct regulator_dev *rdev) |
| { |
| struct wm831x_isink *isink = rdev_get_drvdata(rdev); |
| struct wm831x *wm831x = isink->wm831x; |
| int ret; |
| |
| /* We have a two stage enable: first start the ISINK... */ |
| ret = wm831x_set_bits(wm831x, isink->reg, WM831X_CS1_ENA, |
| WM831X_CS1_ENA); |
| if (ret != 0) |
| return ret; |
| |
| /* ...then enable drive */ |
| ret = wm831x_set_bits(wm831x, isink->reg, WM831X_CS1_DRIVE, |
| WM831X_CS1_DRIVE); |
| if (ret != 0) |
| wm831x_set_bits(wm831x, isink->reg, WM831X_CS1_ENA, 0); |
| |
| return ret; |
| |
| } |
| |
| static int wm831x_isink_disable(struct regulator_dev *rdev) |
| { |
| struct wm831x_isink *isink = rdev_get_drvdata(rdev); |
| struct wm831x *wm831x = isink->wm831x; |
| int ret; |
| |
| ret = wm831x_set_bits(wm831x, isink->reg, WM831X_CS1_DRIVE, 0); |
| if (ret < 0) |
| return ret; |
| |
| ret = wm831x_set_bits(wm831x, isink->reg, WM831X_CS1_ENA, 0); |
| if (ret < 0) |
| return ret; |
| |
| return ret; |
| |
| } |
| |
| static int wm831x_isink_is_enabled(struct regulator_dev *rdev) |
| { |
| struct wm831x_isink *isink = rdev_get_drvdata(rdev); |
| struct wm831x *wm831x = isink->wm831x; |
| int ret; |
| |
| ret = wm831x_reg_read(wm831x, isink->reg); |
| if (ret < 0) |
| return ret; |
| |
| if ((ret & (WM831X_CS1_ENA | WM831X_CS1_DRIVE)) == |
| (WM831X_CS1_ENA | WM831X_CS1_DRIVE)) |
| return 1; |
| else |
| return 0; |
| } |
| |
| static const struct regulator_ops wm831x_isink_ops = { |
| .is_enabled = wm831x_isink_is_enabled, |
| .enable = wm831x_isink_enable, |
| .disable = wm831x_isink_disable, |
| .set_current_limit = regulator_set_current_limit_regmap, |
| .get_current_limit = regulator_get_current_limit_regmap, |
| }; |
| |
| static irqreturn_t wm831x_isink_irq(int irq, void *data) |
| { |
| struct wm831x_isink *isink = data; |
| |
| regulator_notifier_call_chain(isink->regulator, |
| REGULATOR_EVENT_OVER_CURRENT, |
| NULL); |
| |
| return IRQ_HANDLED; |
| } |
| |
| |
| static int wm831x_isink_probe(struct platform_device *pdev) |
| { |
| struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent); |
| struct wm831x_pdata *pdata = dev_get_platdata(wm831x->dev); |
| struct wm831x_isink *isink; |
| int id = pdev->id % ARRAY_SIZE(pdata->isink); |
| struct regulator_config config = { }; |
| struct resource *res; |
| int ret, irq; |
| |
| dev_dbg(&pdev->dev, "Probing ISINK%d\n", id + 1); |
| |
| if (pdata == NULL || pdata->isink[id] == NULL) |
| return -ENODEV; |
| |
| isink = devm_kzalloc(&pdev->dev, sizeof(struct wm831x_isink), |
| GFP_KERNEL); |
| if (!isink) |
| return -ENOMEM; |
| |
| isink->wm831x = wm831x; |
| |
| res = platform_get_resource(pdev, IORESOURCE_REG, 0); |
| if (res == NULL) { |
| dev_err(&pdev->dev, "No REG resource\n"); |
| ret = -EINVAL; |
| goto err; |
| } |
| isink->reg = res->start; |
| |
| /* For current parts this is correct; probably need to revisit |
| * in future. |
| */ |
| snprintf(isink->name, sizeof(isink->name), "ISINK%d", id + 1); |
| isink->desc.name = isink->name; |
| isink->desc.id = id; |
| isink->desc.ops = &wm831x_isink_ops; |
| isink->desc.type = REGULATOR_CURRENT; |
| isink->desc.owner = THIS_MODULE; |
| isink->desc.curr_table = wm831x_isinkv_values; |
| isink->desc.n_current_limits = ARRAY_SIZE(wm831x_isinkv_values); |
| isink->desc.csel_reg = isink->reg; |
| isink->desc.csel_mask = WM831X_CS1_ISEL_MASK; |
| |
| config.dev = pdev->dev.parent; |
| config.init_data = pdata->isink[id]; |
| config.driver_data = isink; |
| config.regmap = wm831x->regmap; |
| |
| isink->regulator = devm_regulator_register(&pdev->dev, &isink->desc, |
| &config); |
| if (IS_ERR(isink->regulator)) { |
| ret = PTR_ERR(isink->regulator); |
| dev_err(wm831x->dev, "Failed to register ISINK%d: %d\n", |
| id + 1, ret); |
| goto err; |
| } |
| |
| irq = wm831x_irq(wm831x, platform_get_irq(pdev, 0)); |
| ret = devm_request_threaded_irq(&pdev->dev, irq, NULL, |
| wm831x_isink_irq, |
| IRQF_TRIGGER_RISING | IRQF_ONESHOT, |
| isink->name, |
| isink); |
| if (ret != 0) { |
| dev_err(&pdev->dev, "Failed to request ISINK IRQ %d: %d\n", |
| irq, ret); |
| goto err; |
| } |
| |
| platform_set_drvdata(pdev, isink); |
| |
| return 0; |
| |
| err: |
| return ret; |
| } |
| |
| static struct platform_driver wm831x_isink_driver = { |
| .probe = wm831x_isink_probe, |
| .driver = { |
| .name = "wm831x-isink", |
| .probe_type = PROBE_PREFER_ASYNCHRONOUS, |
| }, |
| }; |
| |
| static int __init wm831x_isink_init(void) |
| { |
| int ret; |
| ret = platform_driver_register(&wm831x_isink_driver); |
| if (ret != 0) |
| pr_err("Failed to register WM831x ISINK driver: %d\n", ret); |
| |
| return ret; |
| } |
| subsys_initcall(wm831x_isink_init); |
| |
| static void __exit wm831x_isink_exit(void) |
| { |
| platform_driver_unregister(&wm831x_isink_driver); |
| } |
| module_exit(wm831x_isink_exit); |
| |
| /* Module information */ |
| MODULE_AUTHOR("Mark Brown"); |
| MODULE_DESCRIPTION("WM831x current sink driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:wm831x-isink"); |