| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Central probing code for the FOTG210 dual role driver |
| * We register one driver for the hardware and then we decide |
| * whether to proceed with probing the host or the peripheral |
| * driver. |
| */ |
| #include <linux/bitops.h> |
| #include <linux/clk.h> |
| #include <linux/device.h> |
| #include <linux/mfd/syscon.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/platform_device.h> |
| #include <linux/regmap.h> |
| #include <linux/usb.h> |
| #include <linux/usb/otg.h> |
| |
| #include "fotg210.h" |
| |
| /* Role Register 0x80 */ |
| #define FOTG210_RR 0x80 |
| #define FOTG210_RR_ID BIT(21) /* 1 = B-device, 0 = A-device */ |
| #define FOTG210_RR_CROLE BIT(20) /* 1 = device, 0 = host */ |
| |
| /* |
| * Gemini-specific initialization function, only executed on the |
| * Gemini SoC using the global misc control register. |
| * |
| * The gemini USB blocks are connected to either Mini-A (host mode) or |
| * Mini-B (peripheral mode) plugs. There is no role switch support on the |
| * Gemini SoC, just either-or. |
| */ |
| #define GEMINI_GLOBAL_MISC_CTRL 0x30 |
| #define GEMINI_MISC_USB0_WAKEUP BIT(14) |
| #define GEMINI_MISC_USB1_WAKEUP BIT(15) |
| #define GEMINI_MISC_USB0_VBUS_ON BIT(22) |
| #define GEMINI_MISC_USB1_VBUS_ON BIT(23) |
| #define GEMINI_MISC_USB0_MINI_B BIT(29) |
| #define GEMINI_MISC_USB1_MINI_B BIT(30) |
| |
| static int fotg210_gemini_init(struct fotg210 *fotg, struct resource *res, |
| enum usb_dr_mode mode) |
| { |
| struct device *dev = fotg->dev; |
| struct device_node *np = dev->of_node; |
| struct regmap *map; |
| bool wakeup; |
| u32 mask, val; |
| int ret; |
| |
| map = syscon_regmap_lookup_by_phandle(np, "syscon"); |
| if (IS_ERR(map)) |
| return dev_err_probe(dev, PTR_ERR(map), "no syscon\n"); |
| fotg->map = map; |
| wakeup = of_property_read_bool(np, "wakeup-source"); |
| |
| /* |
| * Figure out if this is USB0 or USB1 by simply checking the |
| * physical base address. |
| */ |
| mask = 0; |
| if (res->start == 0x69000000) { |
| fotg->port = GEMINI_PORT_1; |
| mask = GEMINI_MISC_USB1_VBUS_ON | GEMINI_MISC_USB1_MINI_B | |
| GEMINI_MISC_USB1_WAKEUP; |
| if (mode == USB_DR_MODE_HOST) |
| val = GEMINI_MISC_USB1_VBUS_ON; |
| else |
| val = GEMINI_MISC_USB1_MINI_B; |
| if (wakeup) |
| val |= GEMINI_MISC_USB1_WAKEUP; |
| } else { |
| fotg->port = GEMINI_PORT_0; |
| mask = GEMINI_MISC_USB0_VBUS_ON | GEMINI_MISC_USB0_MINI_B | |
| GEMINI_MISC_USB0_WAKEUP; |
| if (mode == USB_DR_MODE_HOST) |
| val = GEMINI_MISC_USB0_VBUS_ON; |
| else |
| val = GEMINI_MISC_USB0_MINI_B; |
| if (wakeup) |
| val |= GEMINI_MISC_USB0_WAKEUP; |
| } |
| |
| ret = regmap_update_bits(map, GEMINI_GLOBAL_MISC_CTRL, mask, val); |
| if (ret) { |
| dev_err(dev, "failed to initialize Gemini PHY\n"); |
| return ret; |
| } |
| |
| dev_info(dev, "initialized Gemini PHY in %s mode\n", |
| (mode == USB_DR_MODE_HOST) ? "host" : "gadget"); |
| return 0; |
| } |
| |
| /** |
| * fotg210_vbus() - Called by gadget driver to enable/disable VBUS |
| * @fotg: pointer to a private fotg210 object |
| * @enable: true to enable VBUS, false to disable VBUS |
| */ |
| void fotg210_vbus(struct fotg210 *fotg, bool enable) |
| { |
| u32 mask; |
| u32 val; |
| int ret; |
| |
| switch (fotg->port) { |
| case GEMINI_PORT_0: |
| mask = GEMINI_MISC_USB0_VBUS_ON; |
| val = enable ? GEMINI_MISC_USB0_VBUS_ON : 0; |
| break; |
| case GEMINI_PORT_1: |
| mask = GEMINI_MISC_USB1_VBUS_ON; |
| val = enable ? GEMINI_MISC_USB1_VBUS_ON : 0; |
| break; |
| default: |
| return; |
| } |
| ret = regmap_update_bits(fotg->map, GEMINI_GLOBAL_MISC_CTRL, mask, val); |
| if (ret) |
| dev_err(fotg->dev, "failed to %s VBUS\n", |
| enable ? "enable" : "disable"); |
| dev_info(fotg->dev, "%s: %s VBUS\n", __func__, enable ? "enable" : "disable"); |
| } |
| |
| static int fotg210_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| enum usb_dr_mode mode; |
| struct fotg210 *fotg; |
| u32 val; |
| int ret; |
| |
| fotg = devm_kzalloc(dev, sizeof(*fotg), GFP_KERNEL); |
| if (!fotg) |
| return -ENOMEM; |
| fotg->dev = dev; |
| |
| fotg->base = devm_platform_get_and_ioremap_resource(pdev, 0, &fotg->res); |
| if (IS_ERR(fotg->base)) |
| return PTR_ERR(fotg->base); |
| |
| fotg->pclk = devm_clk_get_optional_enabled(dev, "PCLK"); |
| if (IS_ERR(fotg->pclk)) |
| return PTR_ERR(fotg->pclk); |
| |
| mode = usb_get_dr_mode(dev); |
| |
| if (of_device_is_compatible(dev->of_node, "cortina,gemini-usb")) { |
| ret = fotg210_gemini_init(fotg, fotg->res, mode); |
| if (ret) |
| return ret; |
| } |
| |
| val = readl(fotg->base + FOTG210_RR); |
| if (mode == USB_DR_MODE_PERIPHERAL) { |
| if (!(val & FOTG210_RR_CROLE)) |
| dev_err(dev, "block not in device role\n"); |
| ret = fotg210_udc_probe(pdev, fotg); |
| } else { |
| if (val & FOTG210_RR_CROLE) |
| dev_err(dev, "block not in host role\n"); |
| ret = fotg210_hcd_probe(pdev, fotg); |
| } |
| |
| return ret; |
| } |
| |
| static void fotg210_remove(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| enum usb_dr_mode mode; |
| |
| mode = usb_get_dr_mode(dev); |
| |
| if (mode == USB_DR_MODE_PERIPHERAL) |
| fotg210_udc_remove(pdev); |
| else |
| fotg210_hcd_remove(pdev); |
| } |
| |
| #ifdef CONFIG_OF |
| static const struct of_device_id fotg210_of_match[] = { |
| { .compatible = "faraday,fotg200" }, |
| { .compatible = "faraday,fotg210" }, |
| /* TODO: can we also handle FUSB220? */ |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, fotg210_of_match); |
| #endif |
| |
| static struct platform_driver fotg210_driver = { |
| .driver = { |
| .name = "fotg210", |
| .of_match_table = of_match_ptr(fotg210_of_match), |
| }, |
| .probe = fotg210_probe, |
| .remove_new = fotg210_remove, |
| }; |
| |
| static int __init fotg210_init(void) |
| { |
| if (IS_ENABLED(CONFIG_USB_FOTG210_HCD) && !usb_disabled()) |
| fotg210_hcd_init(); |
| return platform_driver_register(&fotg210_driver); |
| } |
| module_init(fotg210_init); |
| |
| static void __exit fotg210_cleanup(void) |
| { |
| platform_driver_unregister(&fotg210_driver); |
| if (IS_ENABLED(CONFIG_USB_FOTG210_HCD)) |
| fotg210_hcd_cleanup(); |
| } |
| module_exit(fotg210_cleanup); |
| |
| MODULE_AUTHOR("Yuan-Hsin Chen, Feng-Hsin Chiang"); |
| MODULE_LICENSE("GPL"); |
| MODULE_DESCRIPTION("FOTG210 Dual Role Controller Driver"); |