Merge 4.12-rc6 into usb-next
We want the USB fixes in here.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/Documentation/ABI/testing/sysfs-class-typec b/Documentation/ABI/testing/sysfs-class-typec
index d4a3d23..5be552e 100644
--- a/Documentation/ABI/testing/sysfs-class-typec
+++ b/Documentation/ABI/testing/sysfs-class-typec
@@ -30,6 +30,21 @@
Valid values: source, sink
+What: /sys/class/typec/<port>/port_type
+Date: May 2017
+Contact: Badhri Jagan Sridharan <Badhri@google.com>
+Description:
+ Indicates the type of the port. This attribute can be used for
+ requesting a change in the port type. Port type change is
+ supported as a synchronous operation, so write(2) to the
+ attribute will not return until the operation has finished.
+
+ Valid values:
+ - source (The port will behave as source only DFP port)
+ - sink (The port will behave as sink only UFP port)
+ - dual (The port will behave as dual-role-data and
+ dual-role-power port)
+
What: /sys/class/typec/<port>/vconn_source
Date: April 2017
Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com>
diff --git a/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt b/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt
index 09aeba9..32f0572 100644
--- a/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt
+++ b/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt
@@ -3,9 +3,10 @@
Required properties:
- compatible: one of: "brcm,ns-ax-usb3-phy", "brcm,ns-bx-usb3-phy".
-- reg: register mappings for DMP (Device Management Plugin) and ChipCommon B
- MMI.
-- reg-names: "dmp" and "ccb-mii"
+- reg: address of MDIO bus device
+- usb3-dmp-syscon: phandle to syscon with DMP (Device Management Plugin)
+ registers
+- #phy-cells: must be 0
Initialization of USB 3.0 PHY depends on Northstar version. There are currently
three known series: Ax, Bx and Cx.
@@ -15,9 +16,19 @@
Known C0: BCM47094 rev 0
Example:
- usb3-phy {
- compatible = "brcm,ns-ax-usb3-phy";
- reg = <0x18105000 0x1000>, <0x18003000 0x1000>;
- reg-names = "dmp", "ccb-mii";
- #phy-cells = <0>;
+ mdio: mdio@0 {
+ reg = <0x0>;
+ #size-cells = <1>;
+ #address-cells = <0>;
+
+ usb3-phy@10 {
+ compatible = "brcm,ns-ax-usb3-phy";
+ reg = <0x10>;
+ usb3-dmp-syscon = <&usb3_dmp>;
+ #phy-cells = <0>;
+ };
+ };
+
+ usb3_dmp: syscon@18105000 {
+ reg = <0x18105000 0x1000>;
};
diff --git a/Documentation/devicetree/bindings/phy/brcm,ns2-drd-phy.txt b/Documentation/devicetree/bindings/phy/brcm,ns2-drd-phy.txt
new file mode 100644
index 0000000..04f063a
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/brcm,ns2-drd-phy.txt
@@ -0,0 +1,30 @@
+BROADCOM NORTHSTAR2 USB2 (DUAL ROLE DEVICE) PHY
+
+Required properties:
+ - compatible: brcm,ns2-drd-phy
+ - reg: offset and length of the NS2 PHY related registers.
+ - reg-names
+ The below registers must be provided.
+ icfg - for DRD ICFG configurations
+ rst-ctrl - for DRD IDM reset
+ crmu-ctrl - for CRMU core vdd, PHY and PHY PLL reset
+ usb2-strap - for port over current polarity reversal
+ - #phy-cells: Must be 0. No args required.
+ - vbus-gpios: vbus gpio binding
+ - id-gpios: id gpio binding
+
+Refer to phy/phy-bindings.txt for the generic PHY binding properties
+
+Example:
+ usbdrd_phy: phy@66000960 {
+ #phy-cells = <0>;
+ compatible = "brcm,ns2-drd-phy";
+ reg = <0x66000960 0x24>,
+ <0x67012800 0x4>,
+ <0x6501d148 0x4>,
+ <0x664d0700 0x4>;
+ reg-names = "icfg", "rst-ctrl",
+ "crmu-ctrl", "usb2-strap";
+ id-gpios = <&gpio_g 30 0>;
+ vbus-gpios = <&gpio_g 31 0>;
+ };
diff --git a/Documentation/devicetree/bindings/phy/brcm-sata-phy.txt b/Documentation/devicetree/bindings/phy/brcm-sata-phy.txt
index 6ccce09..97977cd 100644
--- a/Documentation/devicetree/bindings/phy/brcm-sata-phy.txt
+++ b/Documentation/devicetree/bindings/phy/brcm-sata-phy.txt
@@ -7,12 +7,13 @@
"brcm,iproc-ns2-sata-phy"
"brcm,iproc-nsp-sata-phy"
"brcm,phy-sata3"
+ "brcm,iproc-sr-sata-phy"
- address-cells: should be 1
- size-cells: should be 0
- reg: register ranges for the PHY PCB interface
- reg-names: should be "phy" and "phy-ctrl"
The "phy-ctrl" registers are only required for
- "brcm,iproc-ns2-sata-phy".
+ "brcm,iproc-ns2-sata-phy" and "brcm,iproc-sr-sata-phy".
Sub-nodes:
Each port's PHY should be represented as a sub-node.
@@ -23,8 +24,8 @@
Sub-nodes optional properties:
- brcm,enable-ssc: use spread spectrum clocking (SSC) on this port
- This property is not applicable for "brcm,iproc-ns2-sata-phy" and
- "brcm,iproc-nsp-sata-phy".
+ This property is not applicable for "brcm,iproc-ns2-sata-phy",
+ "brcm,iproc-nsp-sata-phy" and "brcm,iproc-sr-sata-phy".
Example:
sata-phy@f0458100 {
diff --git a/Documentation/devicetree/bindings/phy/meson-gxl-usb2-phy.txt b/Documentation/devicetree/bindings/phy/meson-gxl-usb2-phy.txt
new file mode 100644
index 0000000..a105494
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/meson-gxl-usb2-phy.txt
@@ -0,0 +1,17 @@
+* Amlogic Meson GXL and GXM USB2 PHY binding
+
+Required properties:
+- compatible: Should be "amlogic,meson-gxl-usb2-phy"
+- reg: The base address and length of the registers
+- #phys-cells: must be 0 (see phy-bindings.txt in this directory)
+
+Optional properties:
+- phy-supply: see phy-bindings.txt in this directory
+
+
+Example:
+ usb2_phy0: phy@78000 {
+ compatible = "amlogic,meson-gxl-usb2-phy";
+ #phy-cells = <0>;
+ reg = <0x0 0x78000 0x0 0x20>;
+ };
diff --git a/Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt b/Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt
index 5fa73b9..d81d73a 100644
--- a/Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt
+++ b/Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt
@@ -1,7 +1,8 @@
-* Amlogic Meson8b and GXBB USB2 PHY
+* Amlogic Meson8, Meson8b and GXBB USB2 PHY
Required properties:
- compatible: Depending on the platform this should be one of:
+ "amlogic,meson8-usb2-phy"
"amlogic,meson8b-usb2-phy"
"amlogic,meson-gxbb-usb2-phy"
- reg: The base address and length of the registers
diff --git a/Documentation/devicetree/bindings/phy/phy-cpcap-usb.txt b/Documentation/devicetree/bindings/phy/phy-cpcap-usb.txt
new file mode 100644
index 0000000..2eb9b2b
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-cpcap-usb.txt
@@ -0,0 +1,40 @@
+Motorola CPCAP PMIC USB PHY binding
+
+Required properties:
+compatible: Shall be either "motorola,cpcap-usb-phy" or
+ "motorola,mapphone-cpcap-usb-phy"
+#phy-cells: Shall be 0
+interrupts: CPCAP PMIC interrupts used by the USB PHY
+interrupt-names: Interrupt names
+io-channels: IIO ADC channels used by the USB PHY
+io-channel-names: IIO ADC channel names
+vusb-supply: Regulator for the PHY
+
+Optional properties:
+pinctrl: Optional alternate pin modes for the PHY
+pinctrl-names: Names for optional pin modes
+mode-gpios: Optional GPIOs for configuring alternate modes
+
+Example:
+cpcap_usb2_phy: phy {
+ compatible = "motorola,mapphone-cpcap-usb-phy";
+ pinctrl-0 = <&usb_gpio_mux_sel1 &usb_gpio_mux_sel2>;
+ pinctrl-1 = <&usb_ulpi_pins>;
+ pinctrl-2 = <&usb_utmi_pins>;
+ pinctrl-3 = <&uart3_pins>;
+ pinctrl-names = "default", "ulpi", "utmi", "uart";
+ #phy-cells = <0>;
+ interrupts-extended = <
+ &cpcap 15 0 &cpcap 14 0 &cpcap 28 0 &cpcap 19 0
+ &cpcap 18 0 &cpcap 17 0 &cpcap 16 0 &cpcap 49 0
+ &cpcap 48 1
+ >;
+ interrupt-names =
+ "id_ground", "id_float", "se0conn", "vbusvld",
+ "sessvld", "sessend", "se1", "dm", "dp";
+ mode-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH
+ &gpio1 0 GPIO_ACTIVE_HIGH>;
+ io-channels = <&cpcap_adc 2>, <&cpcap_adc 7>;
+ io-channel-names = "vbus", "id";
+ vusb-supply = <&vusb>;
+};
diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
index e71a8d2..84d59b0 100644
--- a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
+++ b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
@@ -2,6 +2,7 @@
Required properties (phy (parent) node):
- compatible : should be one of the listed compatibles:
+ * "rockchip,rk3228-usb2phy"
* "rockchip,rk3328-usb2phy"
* "rockchip,rk3366-usb2phy"
* "rockchip,rk3399-usb2phy"
diff --git a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb3.txt b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb3.txt
new file mode 100644
index 0000000..f94cea4
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb3.txt
@@ -0,0 +1,46 @@
+* Renesas R-Car generation 3 USB 3.0 PHY
+
+This file provides information on what the device node for the R-Car generation
+3 USB 3.0 PHY contains.
+If you want to enable spread spectrum clock (ssc), you should use USB_EXTAL
+instead of USB3_CLK. However, if you don't want to these features, you don't
+need this driver.
+
+Required properties:
+- compatible: "renesas,r8a7795-usb3-phy" if the device is a part of an R8A7795
+ SoC.
+ "renesas,r8a7796-usb3-phy" if the device is a part of an R8A7796
+ SoC.
+ "renesas,rcar-gen3-usb3-phy" for a generic R-Car Gen3 compatible
+ device.
+
+ When compatible with the generic version, nodes must list the
+ SoC-specific version corresponding to the platform first
+ followed by the generic version.
+
+- reg: offset and length of the USB 3.0 PHY register block.
+- clocks: A list of phandles and clock-specifier pairs.
+- clock-names: Name of the clocks.
+ - The funcional clock must be "usb3-if".
+ - The usb3's external clock must be "usb3s_clk".
+ - The usb2's external clock must be "usb_extal". If you want to use the ssc,
+ the clock-frequency must not be 0.
+- #phy-cells: see phy-bindings.txt in the same directory, must be <0>.
+
+Optional properties:
+- renesas,ssc-range: Enable/disable spread spectrum clock (ssc) by using
+ the following values as u32:
+ - 0 (or the property doesn't exist): disable the ssc
+ - 4980: enable the ssc as -4980 ppm
+ - 4492: enable the ssc as -4492 ppm
+ - 4003: enable the ssc as -4003 ppm
+
+Example (R-Car H3):
+
+ usb-phy@e65ee000 {
+ compatible = "renesas,r8a7795-usb3-phy",
+ "renesas,rcar-gen3-usb3-phy";
+ reg = <0 0xe65ee000 0 0x90>;
+ clocks = <&cpg CPG_MOD 328>, <&usb3s0_clk>, <&usb_extal>;
+ clock-names = "usb3-if", "usb3s_clk", "usb_extal";
+ };
diff --git a/Documentation/devicetree/bindings/usb/usb-ohci.txt b/Documentation/devicetree/bindings/usb/usb-ohci.txt
index 9df4569..e8766b0 100644
--- a/Documentation/devicetree/bindings/usb/usb-ohci.txt
+++ b/Documentation/devicetree/bindings/usb/usb-ohci.txt
@@ -10,6 +10,7 @@
- big-endian-desc : boolean, set this for hcds with big-endian descriptors
- big-endian : boolean, for hcds with big-endian-regs + big-endian-desc
- no-big-frame-no : boolean, set if frame_no lives in bits [15:0] of HCCA
+- remote-wakeup-connected: remote wakeup is wired on the platform
- num-ports : u32, to override the detected port count
- clocks : a list of phandle + clock specifier pairs
- phys : phandle + phy specifier pair
diff --git a/MAINTAINERS b/MAINTAINERS
index 09b5ab6..42c3f0c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1843,8 +1843,8 @@
F: drivers/media/rc/st_rc.c
F: drivers/media/platform/sti/c8sectpfe/
F: drivers/mmc/host/sdhci-st.c
-F: drivers/phy/phy-miphy28lp.c
-F: drivers/phy/phy-stih407-usb.c
+F: drivers/phy/st/phy-miphy28lp.c
+F: drivers/phy/st/phy-stih407-usb.c
F: drivers/pinctrl/pinctrl-st.c
F: drivers/remoteproc/st_remoteproc.c
F: drivers/remoteproc/st_slim_rproc.c
@@ -10831,11 +10831,11 @@
S: Supported
F: drivers/iio/adc/rcar_gyro_adc.c
-RENESAS USB2 PHY DRIVER
+RENESAS USB PHY DRIVER
M: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
L: linux-renesas-soc@vger.kernel.org
S: Maintained
-F: drivers/phy/phy-rcar-gen3-usb2.c
+F: drivers/phy/renesas/phy-rcar-gen3-usb*.c
RESET CONTROLLER FRAMEWORK
M: Philipp Zabel <p.zabel@pengutronix.de>
@@ -11237,12 +11237,12 @@
S: Supported
F: Documentation/devicetree/bindings/phy/samsung-phy.txt
F: Documentation/phy/samsung-usb2.txt
-F: drivers/phy/phy-exynos4210-usb2.c
-F: drivers/phy/phy-exynos4x12-usb2.c
-F: drivers/phy/phy-exynos5250-usb2.c
-F: drivers/phy/phy-s5pv210-usb2.c
-F: drivers/phy/phy-samsung-usb2.c
-F: drivers/phy/phy-samsung-usb2.h
+F: drivers/phy/samsung/phy-exynos4210-usb2.c
+F: drivers/phy/samsung/phy-exynos4x12-usb2.c
+F: drivers/phy/samsung/phy-exynos5250-usb2.c
+F: drivers/phy/samsung/phy-s5pv210-usb2.c
+F: drivers/phy/samsung/phy-samsung-usb2.c
+F: drivers/phy/samsung/phy-samsung-usb2.h
SERIAL DRIVERS
M: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/base/core.c b/drivers/base/core.c
index bbecaf9..c3064ff 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -2884,3 +2884,19 @@ void set_secondary_fwnode(struct device *dev, struct fwnode_handle *fwnode)
else
dev->fwnode = fwnode;
}
+
+/**
+ * device_set_of_node_from_dev - reuse device-tree node of another device
+ * @dev: device whose device-tree node is being set
+ * @dev2: device whose device-tree node is being reused
+ *
+ * Takes another reference to the new device-tree node after first dropping
+ * any reference held to the old node.
+ */
+void device_set_of_node_from_dev(struct device *dev, const struct device *dev2)
+{
+ of_node_put(dev->of_node);
+ dev->of_node = of_node_get(dev2->of_node);
+ dev->of_node_reused = true;
+}
+EXPORT_SYMBOL_GPL(device_set_of_node_from_dev);
diff --git a/drivers/base/pinctrl.c b/drivers/base/pinctrl.c
index 5917b4b..eb929dd 100644
--- a/drivers/base/pinctrl.c
+++ b/drivers/base/pinctrl.c
@@ -23,6 +23,9 @@ int pinctrl_bind_pins(struct device *dev)
{
int ret;
+ if (dev->of_node_reused)
+ return 0;
+
dev->pins = devm_kzalloc(dev, sizeof(*(dev->pins)), GFP_KERNEL);
if (!dev->pins)
return -ENOMEM;
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index afaf7b6..c1807d4 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -15,73 +15,6 @@
phy users can obtain reference to the PHY. All the users of this
framework should select this config.
-config PHY_BCM_NS_USB2
- tristate "Broadcom Northstar USB 2.0 PHY Driver"
- depends on ARCH_BCM_IPROC || COMPILE_TEST
- depends on HAS_IOMEM && OF
- select GENERIC_PHY
- help
- Enable this to support Broadcom USB 2.0 PHY connected to the USB
- controller on Northstar family.
-
-config PHY_BCM_NS_USB3
- tristate "Broadcom Northstar USB 3.0 PHY Driver"
- depends on ARCH_BCM_IPROC || COMPILE_TEST
- depends on HAS_IOMEM && OF
- select GENERIC_PHY
- help
- Enable this to support Broadcom USB 3.0 PHY connected to the USB
- controller on Northstar family.
-
-config PHY_BERLIN_USB
- tristate "Marvell Berlin USB PHY Driver"
- depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF
- select GENERIC_PHY
- help
- Enable this to support the USB PHY on Marvell Berlin SoCs.
-
-config PHY_BERLIN_SATA
- tristate "Marvell Berlin SATA PHY driver"
- depends on ARCH_BERLIN && HAS_IOMEM && OF
- select GENERIC_PHY
- help
- Enable this to support the SATA PHY on Marvell Berlin SoCs.
-
-config ARMADA375_USBCLUSTER_PHY
- def_bool y
- depends on MACH_ARMADA_375 || COMPILE_TEST
- depends on OF && HAS_IOMEM
- select GENERIC_PHY
-
-config PHY_DA8XX_USB
- tristate "TI DA8xx USB PHY Driver"
- depends on ARCH_DAVINCI_DA8XX
- select GENERIC_PHY
- select MFD_SYSCON
- help
- Enable this to support the USB PHY on DA8xx SoCs.
-
- This driver controls both the USB 1.1 PHY and the USB 2.0 PHY.
-
-config PHY_DM816X_USB
- tristate "TI dm816x USB PHY driver"
- depends on ARCH_OMAP2PLUS
- depends on USB_SUPPORT
- select GENERIC_PHY
- select USB_PHY
- help
- Enable this for dm816x USB to work.
-
-config PHY_EXYNOS_MIPI_VIDEO
- tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver"
- depends on HAS_IOMEM
- depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
- select GENERIC_PHY
- default y if ARCH_S5PV210 || ARCH_EXYNOS
- help
- Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P
- and EXYNOS SoCs.
-
config PHY_LPC18XX_USB_OTG
tristate "NXP LPC18xx/43xx SoC USB OTG PHY driver"
depends on OF && (ARCH_LPC18XX || COMPILE_TEST)
@@ -93,146 +26,6 @@
This driver is need for USB0 support on LPC18xx/43xx and takes
care of enabling and clock setup.
-config PHY_PXA_28NM_HSIC
- tristate "Marvell USB HSIC 28nm PHY Driver"
- depends on HAS_IOMEM
- select GENERIC_PHY
- help
- Enable this to support Marvell USB HSIC PHY driver for Marvell
- SoC. This driver will do the PHY initialization and shutdown.
- The PHY driver will be used by Marvell ehci driver.
-
- To compile this driver as a module, choose M here.
-
-config PHY_PXA_28NM_USB2
- tristate "Marvell USB 2.0 28nm PHY Driver"
- depends on HAS_IOMEM
- select GENERIC_PHY
- help
- Enable this to support Marvell USB 2.0 PHY driver for Marvell
- SoC. This driver will do the PHY initialization and shutdown.
- The PHY driver will be used by Marvell udc/ehci/otg driver.
-
- To compile this driver as a module, choose M here.
-
-config PHY_MVEBU_SATA
- def_bool y
- depends on ARCH_DOVE || MACH_DOVE || MACH_KIRKWOOD
- depends on OF
- select GENERIC_PHY
-
-config PHY_MIPHY28LP
- tristate "STMicroelectronics MIPHY28LP PHY driver for STiH407"
- depends on ARCH_STI
- select GENERIC_PHY
- help
- Enable this to support the miphy transceiver (for SATA/PCIE/USB3)
- that is part of STMicroelectronics STiH407 SoC.
-
-config PHY_RCAR_GEN2
- tristate "Renesas R-Car generation 2 USB PHY driver"
- depends on ARCH_RENESAS
- depends on GENERIC_PHY
- help
- Support for USB PHY found on Renesas R-Car generation 2 SoCs.
-
-config PHY_RCAR_GEN3_USB2
- tristate "Renesas R-Car generation 3 USB 2.0 PHY driver"
- depends on ARCH_RENESAS
- depends on EXTCON
- select GENERIC_PHY
- help
- Support for USB 2.0 PHY found on Renesas R-Car generation 3 SoCs.
-
-config OMAP_CONTROL_PHY
- tristate "OMAP CONTROL PHY Driver"
- depends on ARCH_OMAP2PLUS || COMPILE_TEST
- help
- Enable this to add support for the PHY part present in the control
- module. This driver has API to power on the USB2 PHY and to write to
- the mailbox. The mailbox is present only in omap4 and the register to
- power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an
- additional register to power on USB3 PHY/SATA PHY/PCIE PHY
- (PIPE3 PHY).
-
-config OMAP_USB2
- tristate "OMAP USB2 PHY Driver"
- depends on ARCH_OMAP2PLUS
- depends on USB_SUPPORT
- select GENERIC_PHY
- select USB_PHY
- select OMAP_CONTROL_PHY
- depends on OMAP_OCP2SCP
- help
- Enable this to support the transceiver that is part of SOC. This
- driver takes care of all the PHY functionality apart from comparator.
- The USB OTG controller communicates with the comparator using this
- driver.
-
-config TI_PIPE3
- tristate "TI PIPE3 PHY Driver"
- depends on ARCH_OMAP2PLUS || COMPILE_TEST
- select GENERIC_PHY
- select OMAP_CONTROL_PHY
- depends on OMAP_OCP2SCP
- help
- Enable this to support the PIPE3 PHY that is part of TI SOCs. This
- driver takes care of all the PHY functionality apart from comparator.
- This driver interacts with the "OMAP Control PHY Driver" to power
- on/off the PHY.
-
-config TWL4030_USB
- tristate "TWL4030 USB Transceiver Driver"
- depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS
- depends on USB_SUPPORT
- depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't 'y'
- select GENERIC_PHY
- select USB_PHY
- help
- Enable this to support the USB OTG transceiver on TWL4030
- family chips (including the TWL5030 and TPS659x0 devices).
- This transceiver supports high and full speed devices plus,
- in host mode, low speed.
-
-config PHY_EXYNOS_DP_VIDEO
- tristate "EXYNOS SoC series Display Port PHY driver"
- depends on OF
- depends on ARCH_EXYNOS || COMPILE_TEST
- default ARCH_EXYNOS
- select GENERIC_PHY
- help
- Support for Display Port PHY found on Samsung EXYNOS SoCs.
-
-config BCM_KONA_USB2_PHY
- tristate "Broadcom Kona USB2 PHY Driver"
- depends on HAS_IOMEM
- select GENERIC_PHY
- help
- Enable this to support the Broadcom Kona USB 2.0 PHY.
-
-config PHY_EXYNOS5250_SATA
- tristate "Exynos5250 Sata SerDes/PHY driver"
- depends on SOC_EXYNOS5250
- depends on HAS_IOMEM
- depends on OF
- select GENERIC_PHY
- select I2C
- select I2C_S3C2410
- select MFD_SYSCON
- help
- Enable this to support SATA SerDes/Phy found on Samsung's
- Exynos5250 based SoCs.This SerDes/Phy supports SATA 1.5 Gb/s,
- SATA 3.0 Gb/s, SATA 6.0 Gb/s speeds. It supports one SATA host
- port to accept one SATA device.
-
-config PHY_HIX5HD2_SATA
- tristate "HIX5HD2 SATA PHY Driver"
- depends on ARCH_HIX5HD2 && OF && HAS_IOMEM
- select GENERIC_PHY
- select MFD_SYSCON
- help
- Support for SATA PHY on Hisilicon hix5hd2 Soc.
-
config PHY_MT65XX_USB3
tristate "Mediatek USB3.0 PHY Driver"
depends on ARCH_MEDIATEK && OF
@@ -241,104 +34,6 @@
Say 'Y' here to add support for Mediatek USB3.0 PHY driver,
it supports multiple usb2.0 and usb3.0 ports.
-config PHY_HI6220_USB
- tristate "hi6220 USB PHY support"
- depends on (ARCH_HISI && ARM64) || COMPILE_TEST
- select GENERIC_PHY
- select MFD_SYSCON
- help
- Enable this to support the HISILICON HI6220 USB PHY.
-
- To compile this driver as a module, choose M here.
-
-config PHY_SUN4I_USB
- tristate "Allwinner sunxi SoC USB PHY driver"
- depends on ARCH_SUNXI && HAS_IOMEM && OF
- depends on RESET_CONTROLLER
- depends on EXTCON
- depends on POWER_SUPPLY
- depends on USB_SUPPORT
- select GENERIC_PHY
- select USB_COMMON
- help
- Enable this to support the transceiver that is part of Allwinner
- sunxi SoCs.
-
- This driver controls the entire USB PHY block, both the USB OTG
- parts, as well as the 2 regular USB 2 host PHYs.
-
-config PHY_SUN9I_USB
- tristate "Allwinner sun9i SoC USB PHY driver"
- depends on ARCH_SUNXI && HAS_IOMEM && OF
- depends on RESET_CONTROLLER
- depends on USB_SUPPORT
- select USB_COMMON
- select GENERIC_PHY
- help
- Enable this to support the transceiver that is part of Allwinner
- sun9i SoCs.
-
- This driver controls each individual USB 2 host PHY.
-
-config PHY_SAMSUNG_USB2
- tristate "Samsung USB 2.0 PHY driver"
- depends on HAS_IOMEM
- depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2
- select GENERIC_PHY
- select MFD_SYSCON
- default ARCH_EXYNOS
- help
- Enable this to support the Samsung USB 2.0 PHY driver for Samsung
- SoCs. This driver provides the interface for USB 2.0 PHY. Support
- for particular PHYs will be enabled based on the SoC type in addition
- to this driver.
-
-config PHY_S5PV210_USB2
- bool "Support for S5PV210"
- depends on PHY_SAMSUNG_USB2
- depends on ARCH_S5PV210
- help
- Enable USB PHY support for S5PV210. This option requires that Samsung
- USB 2.0 PHY driver is enabled and means that support for this
- particular SoC is compiled in the driver. In case of S5PV210 two phys
- are available - device and host.
-
-config PHY_EXYNOS4210_USB2
- bool
- depends on PHY_SAMSUNG_USB2
- default CPU_EXYNOS4210
-
-config PHY_EXYNOS4X12_USB2
- bool
- depends on PHY_SAMSUNG_USB2
- default SOC_EXYNOS3250 || SOC_EXYNOS4212 || SOC_EXYNOS4412
-
-config PHY_EXYNOS5250_USB2
- bool
- depends on PHY_SAMSUNG_USB2
- default SOC_EXYNOS5250 || SOC_EXYNOS5420
-
-config PHY_EXYNOS5_USBDRD
- tristate "Exynos5 SoC series USB DRD PHY driver"
- depends on ARCH_EXYNOS && OF
- depends on HAS_IOMEM
- depends on USB_DWC3_EXYNOS
- select GENERIC_PHY
- select MFD_SYSCON
- default y
- help
- Enable USB DRD PHY support for Exynos 5 SoC series.
- This driver provides PHY interface for USB 3.0 DRD controller
- present on Exynos5 SoC series.
-
-config PHY_EXYNOS_PCIE
- bool "Exynos PCIe PHY driver"
- depends on OF && (ARCH_EXYNOS || COMPILE_TEST)
- select GENERIC_PHY
- help
- Enable PCIe PHY support for Exynos SoC series.
- This driver provides PHY interface for Exynos PCIe controller.
-
config PHY_PISTACHIO_USB
tristate "IMG Pistachio USB2.0 PHY driver"
depends on MACH_PISTACHIO
@@ -346,83 +41,6 @@
help
Enable this to support the USB2.0 PHY on the IMG Pistachio SoC.
-config PHY_QCOM_APQ8064_SATA
- tristate "Qualcomm APQ8064 SATA SerDes/PHY driver"
- depends on ARCH_QCOM
- depends on HAS_IOMEM
- depends on OF
- select GENERIC_PHY
-
-config PHY_QCOM_IPQ806X_SATA
- tristate "Qualcomm IPQ806x SATA SerDes/PHY driver"
- depends on ARCH_QCOM
- depends on HAS_IOMEM
- depends on OF
- select GENERIC_PHY
-
-config PHY_ROCKCHIP_USB
- tristate "Rockchip USB2 PHY Driver"
- depends on ARCH_ROCKCHIP && OF
- select GENERIC_PHY
- help
- Enable this to support the Rockchip USB 2.0 PHY.
-
-config PHY_ROCKCHIP_INNO_USB2
- tristate "Rockchip INNO USB2PHY Driver"
- depends on (ARCH_ROCKCHIP || COMPILE_TEST) && OF
- depends on COMMON_CLK
- depends on EXTCON
- depends on USB_SUPPORT
- select GENERIC_PHY
- select USB_COMMON
- help
- Support for Rockchip USB2.0 PHY with Innosilicon IP block.
-
-config PHY_ROCKCHIP_EMMC
- tristate "Rockchip EMMC PHY Driver"
- depends on ARCH_ROCKCHIP && OF
- select GENERIC_PHY
- help
- Enable this to support the Rockchip EMMC PHY.
-
-config PHY_ROCKCHIP_DP
- tristate "Rockchip Display Port PHY Driver"
- depends on ARCH_ROCKCHIP && OF
- select GENERIC_PHY
- help
- Enable this to support the Rockchip Display Port PHY.
-
-config PHY_ROCKCHIP_PCIE
- tristate "Rockchip PCIe PHY Driver"
- depends on (ARCH_ROCKCHIP && OF) || COMPILE_TEST
- select GENERIC_PHY
- select MFD_SYSCON
- help
- Enable this to support the Rockchip PCIe PHY.
-
-config PHY_ROCKCHIP_TYPEC
- tristate "Rockchip TYPEC PHY Driver"
- depends on OF && (ARCH_ROCKCHIP || COMPILE_TEST)
- select EXTCON
- select GENERIC_PHY
- select RESET_CONTROLLER
- help
- Enable this to support the Rockchip USB TYPEC PHY.
-
-config PHY_ST_SPEAR1310_MIPHY
- tristate "ST SPEAR1310-MIPHY driver"
- select GENERIC_PHY
- depends on MACH_SPEAR1310 || COMPILE_TEST
- help
- Support for ST SPEAr1310 MIPHY which can be used for PCIe and SATA.
-
-config PHY_ST_SPEAR1340_MIPHY
- tristate "ST SPEAR1340-MIPHY driver"
- select GENERIC_PHY
- depends on MACH_SPEAR1340 || COMPILE_TEST
- help
- Support for ST SPEAr1340 MIPHY which can be used for PCIe and SATA.
-
config PHY_XGENE
tristate "APM X-Gene 15Gbps PHY support"
depends on HAS_IOMEM && OF && (ARM64 || COMPILE_TEST)
@@ -430,104 +48,18 @@
help
This option enables support for APM X-Gene SoC multi-purpose PHY.
-config PHY_STIH407_USB
- tristate "STMicroelectronics USB2 picoPHY driver for STiH407 family"
- depends on RESET_CONTROLLER
- depends on ARCH_STI || COMPILE_TEST
- select GENERIC_PHY
- help
- Enable this support to enable the picoPHY device used by USB2
- and USB3 controllers on STMicroelectronics STiH407 SoC families.
-
-config PHY_QCOM_QMP
- tristate "Qualcomm QMP PHY Driver"
- depends on OF && COMMON_CLK && (ARCH_QCOM || COMPILE_TEST)
- select GENERIC_PHY
- help
- Enable this to support the QMP PHY transceiver that is used
- with controllers such as PCIe, UFS, and USB on Qualcomm chips.
-
-config PHY_QCOM_QUSB2
- tristate "Qualcomm QUSB2 PHY Driver"
- depends on OF && (ARCH_QCOM || COMPILE_TEST)
- depends on NVMEM || !NVMEM
- select GENERIC_PHY
- help
- Enable this to support the HighSpeed QUSB2 PHY transceiver for USB
- controllers on Qualcomm chips. This driver supports the high-speed
- PHY which is usually paired with either the ChipIdea or Synopsys DWC3
- USB IPs on MSM SOCs.
-
-config PHY_QCOM_UFS
- tristate "Qualcomm UFS PHY driver"
- depends on OF && ARCH_QCOM
- select GENERIC_PHY
- help
- Support for UFS PHY on QCOM chipsets.
-
-config PHY_QCOM_USB_HS
- tristate "Qualcomm USB HS PHY module"
- depends on USB_ULPI_BUS
- depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in
- select GENERIC_PHY
- help
- Support for the USB high-speed ULPI compliant phy on Qualcomm
- chipsets.
-
-config PHY_QCOM_USB_HSIC
- tristate "Qualcomm USB HSIC ULPI PHY module"
- depends on USB_ULPI_BUS
- select GENERIC_PHY
- help
- Support for the USB HSIC ULPI compliant PHY on QCOM chipsets.
-
-config PHY_TUSB1210
- tristate "TI TUSB1210 ULPI PHY module"
- depends on USB_ULPI_BUS
- select GENERIC_PHY
- help
- Support for TI TUSB1210 USB ULPI PHY.
-
-config PHY_BRCM_SATA
- tristate "Broadcom SATA PHY driver"
- depends on ARCH_BRCMSTB || ARCH_BCM_IPROC || BMIPS_GENERIC || COMPILE_TEST
- depends on OF
- select GENERIC_PHY
- default ARCH_BCM_IPROC
- help
- Enable this to support the Broadcom SATA PHY.
- If unsure, say N.
-
-config PHY_CYGNUS_PCIE
- tristate "Broadcom Cygnus PCIe PHY driver"
- depends on OF && (ARCH_BCM_CYGNUS || COMPILE_TEST)
- select GENERIC_PHY
- default ARCH_BCM_CYGNUS
- help
- Enable this to support the Broadcom Cygnus PCIe PHY.
- If unsure, say N.
-
+source "drivers/phy/allwinner/Kconfig"
+source "drivers/phy/amlogic/Kconfig"
+source "drivers/phy/broadcom/Kconfig"
+source "drivers/phy/hisilicon/Kconfig"
+source "drivers/phy/marvell/Kconfig"
+source "drivers/phy/motorola/Kconfig"
+source "drivers/phy/qualcomm/Kconfig"
+source "drivers/phy/renesas/Kconfig"
+source "drivers/phy/rockchip/Kconfig"
+source "drivers/phy/samsung/Kconfig"
+source "drivers/phy/st/Kconfig"
source "drivers/phy/tegra/Kconfig"
-
-config PHY_NS2_PCIE
- tristate "Broadcom Northstar2 PCIe PHY driver"
- depends on OF && MDIO_BUS_MUX_BCM_IPROC
- select GENERIC_PHY
- default ARCH_BCM_IPROC
- help
- Enable this to support the Broadcom Northstar2 PCIe PHY.
- If unsure, say N.
-
-config PHY_MESON8B_USB2
- tristate "Meson8b and GXBB USB2 PHY driver"
- default ARCH_MESON
- depends on OF && (ARCH_MESON || COMPILE_TEST)
- depends on USB_SUPPORT
- select USB_COMMON
- select GENERIC_PHY
- help
- Enable this to support the Meson USB2 PHYs found in Meson8b
- and GXBB SoCs.
- If unsure, say N.
+source "drivers/phy/ti/Kconfig"
endmenu
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index f8047b4..f252201 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -3,64 +3,21 @@
#
obj-$(CONFIG_GENERIC_PHY) += phy-core.o
-obj-$(CONFIG_PHY_BCM_NS_USB2) += phy-bcm-ns-usb2.o
-obj-$(CONFIG_PHY_BCM_NS_USB3) += phy-bcm-ns-usb3.o
-obj-$(CONFIG_PHY_BERLIN_USB) += phy-berlin-usb.o
-obj-$(CONFIG_PHY_BERLIN_SATA) += phy-berlin-sata.o
-obj-$(CONFIG_PHY_DA8XX_USB) += phy-da8xx-usb.o
-obj-$(CONFIG_PHY_DM816X_USB) += phy-dm816x-usb.o
-obj-$(CONFIG_ARMADA375_USBCLUSTER_PHY) += phy-armada375-usb2.o
-obj-$(CONFIG_BCM_KONA_USB2_PHY) += phy-bcm-kona-usb2.o
-obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO) += phy-exynos-dp-video.o
-obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy-exynos-mipi-video.o
obj-$(CONFIG_PHY_LPC18XX_USB_OTG) += phy-lpc18xx-usb-otg.o
-obj-$(CONFIG_PHY_PXA_28NM_USB2) += phy-pxa-28nm-usb2.o
-obj-$(CONFIG_PHY_PXA_28NM_HSIC) += phy-pxa-28nm-hsic.o
-obj-$(CONFIG_PHY_MVEBU_SATA) += phy-mvebu-sata.o
-obj-$(CONFIG_PHY_MIPHY28LP) += phy-miphy28lp.o
-obj-$(CONFIG_PHY_RCAR_GEN2) += phy-rcar-gen2.o
-obj-$(CONFIG_PHY_RCAR_GEN3_USB2) += phy-rcar-gen3-usb2.o
-obj-$(CONFIG_OMAP_CONTROL_PHY) += phy-omap-control.o
-obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o
-obj-$(CONFIG_TI_PIPE3) += phy-ti-pipe3.o
-obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o
-obj-$(CONFIG_PHY_EXYNOS5250_SATA) += phy-exynos5250-sata.o
-obj-$(CONFIG_PHY_HIX5HD2_SATA) += phy-hix5hd2-sata.o
-obj-$(CONFIG_PHY_HI6220_USB) += phy-hi6220-usb.o
obj-$(CONFIG_PHY_MT65XX_USB3) += phy-mt65xx-usb3.o
-obj-$(CONFIG_PHY_SUN4I_USB) += phy-sun4i-usb.o
-obj-$(CONFIG_PHY_SUN9I_USB) += phy-sun9i-usb.o
-obj-$(CONFIG_PHY_SAMSUNG_USB2) += phy-exynos-usb2.o
-phy-exynos-usb2-y += phy-samsung-usb2.o
-phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4210_USB2) += phy-exynos4210-usb2.o
-phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4X12_USB2) += phy-exynos4x12-usb2.o
-phy-exynos-usb2-$(CONFIG_PHY_EXYNOS5250_USB2) += phy-exynos5250-usb2.o
-phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2) += phy-s5pv210-usb2.o
-obj-$(CONFIG_PHY_EXYNOS5_USBDRD) += phy-exynos5-usbdrd.o
-obj-$(CONFIG_PHY_EXYNOS_PCIE) += phy-exynos-pcie.o
-obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o
-obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o
-obj-$(CONFIG_PHY_ROCKCHIP_INNO_USB2) += phy-rockchip-inno-usb2.o
-obj-$(CONFIG_PHY_ROCKCHIP_EMMC) += phy-rockchip-emmc.o
-obj-$(CONFIG_PHY_ROCKCHIP_PCIE) += phy-rockchip-pcie.o
-obj-$(CONFIG_PHY_ROCKCHIP_DP) += phy-rockchip-dp.o
-obj-$(CONFIG_PHY_ROCKCHIP_TYPEC) += phy-rockchip-typec.o
-obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o
-obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY) += phy-spear1310-miphy.o
-obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY) += phy-spear1340-miphy.o
obj-$(CONFIG_PHY_XGENE) += phy-xgene.o
-obj-$(CONFIG_PHY_STIH407_USB) += phy-stih407-usb.o
-obj-$(CONFIG_PHY_QCOM_QMP) += phy-qcom-qmp.o
-obj-$(CONFIG_PHY_QCOM_QUSB2) += phy-qcom-qusb2.o
-obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs.o
-obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-20nm.o
-obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-14nm.o
-obj-$(CONFIG_PHY_QCOM_USB_HS) += phy-qcom-usb-hs.o
-obj-$(CONFIG_PHY_QCOM_USB_HSIC) += phy-qcom-usb-hsic.o
-obj-$(CONFIG_PHY_TUSB1210) += phy-tusb1210.o
-obj-$(CONFIG_PHY_BRCM_SATA) += phy-brcm-sata.o
obj-$(CONFIG_PHY_PISTACHIO_USB) += phy-pistachio-usb.o
-obj-$(CONFIG_PHY_CYGNUS_PCIE) += phy-bcm-cygnus-pcie.o
-obj-$(CONFIG_ARCH_TEGRA) += tegra/
-obj-$(CONFIG_PHY_NS2_PCIE) += phy-bcm-ns2-pcie.o
-obj-$(CONFIG_PHY_MESON8B_USB2) += phy-meson8b-usb2.o
+
+obj-$(CONFIG_ARCH_SUNXI) += allwinner/
+obj-$(CONFIG_ARCH_MESON) += amlogic/
+obj-$(CONFIG_ARCH_RENESAS) += renesas/
+obj-$(CONFIG_ARCH_ROCKCHIP) += rockchip/
+obj-$(CONFIG_ARCH_TEGRA) += tegra/
+obj-y += broadcom/ \
+ hisilicon/ \
+ marvell/ \
+ motorola/ \
+ qualcomm/ \
+ samsung/ \
+ st/ \
+ ti/
diff --git a/drivers/phy/allwinner/Kconfig b/drivers/phy/allwinner/Kconfig
new file mode 100644
index 0000000..cdc1e74
--- /dev/null
+++ b/drivers/phy/allwinner/Kconfig
@@ -0,0 +1,31 @@
+#
+# Phy drivers for Allwinner platforms
+#
+config PHY_SUN4I_USB
+ tristate "Allwinner sunxi SoC USB PHY driver"
+ depends on ARCH_SUNXI && HAS_IOMEM && OF
+ depends on RESET_CONTROLLER
+ depends on EXTCON
+ depends on POWER_SUPPLY
+ depends on USB_SUPPORT
+ select GENERIC_PHY
+ select USB_COMMON
+ help
+ Enable this to support the transceiver that is part of Allwinner
+ sunxi SoCs.
+
+ This driver controls the entire USB PHY block, both the USB OTG
+ parts, as well as the 2 regular USB 2 host PHYs.
+
+config PHY_SUN9I_USB
+ tristate "Allwinner sun9i SoC USB PHY driver"
+ depends on ARCH_SUNXI && HAS_IOMEM && OF
+ depends on RESET_CONTROLLER
+ depends on USB_SUPPORT
+ select USB_COMMON
+ select GENERIC_PHY
+ help
+ Enable this to support the transceiver that is part of Allwinner
+ sun9i SoCs.
+
+ This driver controls each individual USB 2 host PHY.
diff --git a/drivers/phy/allwinner/Makefile b/drivers/phy/allwinner/Makefile
new file mode 100644
index 0000000..8605529c
--- /dev/null
+++ b/drivers/phy/allwinner/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_PHY_SUN4I_USB) += phy-sun4i-usb.o
+obj-$(CONFIG_PHY_SUN9I_USB) += phy-sun9i-usb.o
diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/allwinner/phy-sun4i-usb.c
similarity index 100%
rename from drivers/phy/phy-sun4i-usb.c
rename to drivers/phy/allwinner/phy-sun4i-usb.c
diff --git a/drivers/phy/phy-sun9i-usb.c b/drivers/phy/allwinner/phy-sun9i-usb.c
similarity index 100%
rename from drivers/phy/phy-sun9i-usb.c
rename to drivers/phy/allwinner/phy-sun9i-usb.c
diff --git a/drivers/phy/amlogic/Kconfig b/drivers/phy/amlogic/Kconfig
new file mode 100644
index 0000000..cb8f450
--- /dev/null
+++ b/drivers/phy/amlogic/Kconfig
@@ -0,0 +1,27 @@
+#
+# Phy drivers for Amlogic platforms
+#
+config PHY_MESON8B_USB2
+ tristate "Meson8, Meson8b and GXBB USB2 PHY driver"
+ default ARCH_MESON
+ depends on OF && (ARCH_MESON || COMPILE_TEST)
+ depends on USB_SUPPORT
+ select USB_COMMON
+ select GENERIC_PHY
+ help
+ Enable this to support the Meson USB2 PHYs found in Meson8,
+ Meson8b and GXBB SoCs.
+ If unsure, say N.
+
+config PHY_MESON_GXL_USB2
+ tristate "Meson GXL and GXM USB2 PHY drivers"
+ default ARCH_MESON
+ depends on OF && (ARCH_MESON || COMPILE_TEST)
+ depends on USB_SUPPORT
+ select USB_COMMON
+ select GENERIC_PHY
+ select REGMAP_MMIO
+ help
+ Enable this to support the Meson USB2 PHYs found in Meson
+ GXL and GXM SoCs.
+ If unsure, say N.
diff --git a/drivers/phy/amlogic/Makefile b/drivers/phy/amlogic/Makefile
new file mode 100644
index 0000000..cfdc98715
--- /dev/null
+++ b/drivers/phy/amlogic/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_PHY_MESON8B_USB2) += phy-meson8b-usb2.o
+obj-$(CONFIG_PHY_MESON_GXL_USB2) += phy-meson-gxl-usb2.o
diff --git a/drivers/phy/amlogic/phy-meson-gxl-usb2.c b/drivers/phy/amlogic/phy-meson-gxl-usb2.c
new file mode 100644
index 0000000..e90c4ee
--- /dev/null
+++ b/drivers/phy/amlogic/phy-meson-gxl-usb2.c
@@ -0,0 +1,273 @@
+/*
+ * Meson GXL and GXM USB2 PHY driver
+ *
+ * Copyright (C) 2017 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/usb/of.h>
+
+/* bits [31:27] are read-only */
+#define U2P_R0 0x0
+ #define U2P_R0_BYPASS_SEL BIT(0)
+ #define U2P_R0_BYPASS_DM_EN BIT(1)
+ #define U2P_R0_BYPASS_DP_EN BIT(2)
+ #define U2P_R0_TXBITSTUFF_ENH BIT(3)
+ #define U2P_R0_TXBITSTUFF_EN BIT(4)
+ #define U2P_R0_DM_PULLDOWN BIT(5)
+ #define U2P_R0_DP_PULLDOWN BIT(6)
+ #define U2P_R0_DP_VBUS_VLD_EXT_SEL BIT(7)
+ #define U2P_R0_DP_VBUS_VLD_EXT BIT(8)
+ #define U2P_R0_ADP_PRB_EN BIT(9)
+ #define U2P_R0_ADP_DISCHARGE BIT(10)
+ #define U2P_R0_ADP_CHARGE BIT(11)
+ #define U2P_R0_DRV_VBUS BIT(12)
+ #define U2P_R0_ID_PULLUP BIT(13)
+ #define U2P_R0_LOOPBACK_EN_B BIT(14)
+ #define U2P_R0_OTG_DISABLE BIT(15)
+ #define U2P_R0_COMMON_ONN BIT(16)
+ #define U2P_R0_FSEL_MASK GENMASK(19, 17)
+ #define U2P_R0_REF_CLK_SEL_MASK GENMASK(21, 20)
+ #define U2P_R0_POWER_ON_RESET BIT(22)
+ #define U2P_R0_V_ATE_TEST_EN_B_MASK GENMASK(24, 23)
+ #define U2P_R0_ID_SET_ID_DQ BIT(25)
+ #define U2P_R0_ATE_RESET BIT(26)
+ #define U2P_R0_FSV_MINUS BIT(27)
+ #define U2P_R0_FSV_PLUS BIT(28)
+ #define U2P_R0_BYPASS_DM_DATA BIT(29)
+ #define U2P_R0_BYPASS_DP_DATA BIT(30)
+
+#define U2P_R1 0x4
+ #define U2P_R1_BURN_IN_TEST BIT(0)
+ #define U2P_R1_ACA_ENABLE BIT(1)
+ #define U2P_R1_DCD_ENABLE BIT(2)
+ #define U2P_R1_VDAT_SRC_EN_B BIT(3)
+ #define U2P_R1_VDAT_DET_EN_B BIT(4)
+ #define U2P_R1_CHARGES_SEL BIT(5)
+ #define U2P_R1_TX_PREEMP_PULSE_TUNE BIT(6)
+ #define U2P_R1_TX_PREEMP_AMP_TUNE_MASK GENMASK(8, 7)
+ #define U2P_R1_TX_RES_TUNE_MASK GENMASK(10, 9)
+ #define U2P_R1_TX_RISE_TUNE_MASK GENMASK(12, 11)
+ #define U2P_R1_TX_VREF_TUNE_MASK GENMASK(16, 13)
+ #define U2P_R1_TX_FSLS_TUNE_MASK GENMASK(20, 17)
+ #define U2P_R1_TX_HSXV_TUNE_MASK GENMASK(22, 21)
+ #define U2P_R1_OTG_TUNE_MASK GENMASK(25, 23)
+ #define U2P_R1_SQRX_TUNE_MASK GENMASK(28, 26)
+ #define U2P_R1_COMP_DIS_TUNE_MASK GENMASK(31, 29)
+
+/* bits [31:14] are read-only */
+#define U2P_R2 0x8
+ #define U2P_R2_DATA_IN_MASK GENMASK(3, 0)
+ #define U2P_R2_DATA_IN_EN_MASK GENMASK(7, 4)
+ #define U2P_R2_ADDR_MASK GENMASK(11, 8)
+ #define U2P_R2_DATA_OUT_SEL BIT(12)
+ #define U2P_R2_CLK BIT(13)
+ #define U2P_R2_DATA_OUT_MASK GENMASK(17, 14)
+ #define U2P_R2_ACA_PIN_RANGE_C BIT(18)
+ #define U2P_R2_ACA_PIN_RANGE_B BIT(19)
+ #define U2P_R2_ACA_PIN_RANGE_A BIT(20)
+ #define U2P_R2_ACA_PIN_GND BIT(21)
+ #define U2P_R2_ACA_PIN_FLOAT BIT(22)
+ #define U2P_R2_CHARGE_DETECT BIT(23)
+ #define U2P_R2_DEVICE_SESSION_VALID BIT(24)
+ #define U2P_R2_ADP_PROBE BIT(25)
+ #define U2P_R2_ADP_SENSE BIT(26)
+ #define U2P_R2_SESSION_END BIT(27)
+ #define U2P_R2_VBUS_VALID BIT(28)
+ #define U2P_R2_B_VALID BIT(29)
+ #define U2P_R2_A_VALID BIT(30)
+ #define U2P_R2_ID_DIG BIT(31)
+
+#define U2P_R3 0xc
+
+#define RESET_COMPLETE_TIME 500
+
+struct phy_meson_gxl_usb2_priv {
+ struct regmap *regmap;
+ enum phy_mode mode;
+ int is_enabled;
+};
+
+static const struct regmap_config phy_meson_gxl_usb2_regmap_conf = {
+ .reg_bits = 8,
+ .val_bits = 32,
+ .reg_stride = 4,
+ .max_register = U2P_R3,
+};
+
+static int phy_meson_gxl_usb2_reset(struct phy *phy)
+{
+ struct phy_meson_gxl_usb2_priv *priv = phy_get_drvdata(phy);
+
+ if (priv->is_enabled) {
+ /* reset the PHY and wait until settings are stabilized */
+ regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_POWER_ON_RESET,
+ U2P_R0_POWER_ON_RESET);
+ udelay(RESET_COMPLETE_TIME);
+ regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_POWER_ON_RESET,
+ 0);
+ udelay(RESET_COMPLETE_TIME);
+ }
+
+ return 0;
+}
+
+static int phy_meson_gxl_usb2_set_mode(struct phy *phy, enum phy_mode mode)
+{
+ struct phy_meson_gxl_usb2_priv *priv = phy_get_drvdata(phy);
+
+ switch (mode) {
+ case PHY_MODE_USB_HOST:
+ case PHY_MODE_USB_OTG:
+ regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_DM_PULLDOWN,
+ U2P_R0_DM_PULLDOWN);
+ regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_DP_PULLDOWN,
+ U2P_R0_DP_PULLDOWN);
+ regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_ID_PULLUP, 0);
+ break;
+
+ case PHY_MODE_USB_DEVICE:
+ regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_DM_PULLDOWN,
+ 0);
+ regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_DP_PULLDOWN,
+ 0);
+ regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_ID_PULLUP,
+ U2P_R0_ID_PULLUP);
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ phy_meson_gxl_usb2_reset(phy);
+
+ priv->mode = mode;
+
+ return 0;
+}
+
+static int phy_meson_gxl_usb2_power_off(struct phy *phy)
+{
+ struct phy_meson_gxl_usb2_priv *priv = phy_get_drvdata(phy);
+
+ priv->is_enabled = 0;
+
+ /* power off the PHY by putting it into reset mode */
+ regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_POWER_ON_RESET,
+ U2P_R0_POWER_ON_RESET);
+
+ return 0;
+}
+
+static int phy_meson_gxl_usb2_power_on(struct phy *phy)
+{
+ struct phy_meson_gxl_usb2_priv *priv = phy_get_drvdata(phy);
+ int ret;
+
+ priv->is_enabled = 1;
+
+ /* power on the PHY by taking it out of reset mode */
+ regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_POWER_ON_RESET, 0);
+
+ ret = phy_meson_gxl_usb2_set_mode(phy, priv->mode);
+ if (ret) {
+ phy_meson_gxl_usb2_power_off(phy);
+
+ dev_err(&phy->dev, "Failed to initialize PHY with mode %d\n",
+ priv->mode);
+ return ret;
+ }
+
+ return 0;
+}
+
+static const struct phy_ops phy_meson_gxl_usb2_ops = {
+ .power_on = phy_meson_gxl_usb2_power_on,
+ .power_off = phy_meson_gxl_usb2_power_off,
+ .set_mode = phy_meson_gxl_usb2_set_mode,
+ .reset = phy_meson_gxl_usb2_reset,
+ .owner = THIS_MODULE,
+};
+
+static int phy_meson_gxl_usb2_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct phy_provider *phy_provider;
+ struct resource *res;
+ struct phy_meson_gxl_usb2_priv *priv;
+ struct phy *phy;
+ void __iomem *base;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, priv);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ switch (of_usb_get_dr_mode_by_phy(dev->of_node, -1)) {
+ case USB_DR_MODE_PERIPHERAL:
+ priv->mode = PHY_MODE_USB_DEVICE;
+ break;
+ case USB_DR_MODE_OTG:
+ priv->mode = PHY_MODE_USB_OTG;
+ break;
+ case USB_DR_MODE_HOST:
+ default:
+ priv->mode = PHY_MODE_USB_HOST;
+ break;
+ }
+
+ priv->regmap = devm_regmap_init_mmio(dev, base,
+ &phy_meson_gxl_usb2_regmap_conf);
+ if (IS_ERR(priv->regmap))
+ return PTR_ERR(priv->regmap);
+
+ phy = devm_phy_create(dev, NULL, &phy_meson_gxl_usb2_ops);
+ if (IS_ERR(phy)) {
+ dev_err(dev, "failed to create PHY\n");
+ return PTR_ERR(phy);
+ }
+
+ phy_set_drvdata(phy, priv);
+
+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+ return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id phy_meson_gxl_usb2_of_match[] = {
+ { .compatible = "amlogic,meson-gxl-usb2-phy", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, phy_meson_gxl_usb2_of_match);
+
+static struct platform_driver phy_meson_gxl_usb2_driver = {
+ .probe = phy_meson_gxl_usb2_probe,
+ .driver = {
+ .name = "phy-meson-gxl-usb2",
+ .of_match_table = phy_meson_gxl_usb2_of_match,
+ },
+};
+module_platform_driver(phy_meson_gxl_usb2_driver);
+
+MODULE_AUTHOR("Martin Blumenstingl <martin.blumenstingl@googlemail.com>");
+MODULE_DESCRIPTION("Meson GXL and GXM USB2 PHY driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/phy-meson8b-usb2.c b/drivers/phy/amlogic/phy-meson8b-usb2.c
similarity index 97%
rename from drivers/phy/phy-meson8b-usb2.c
rename to drivers/phy/amlogic/phy-meson8b-usb2.c
index 30f56a6..9c01b7e 100644
--- a/drivers/phy/phy-meson8b-usb2.c
+++ b/drivers/phy/amlogic/phy-meson8b-usb2.c
@@ -1,5 +1,5 @@
/*
- * Meson8b and GXBB USB2 PHY driver
+ * Meson8, Meson8b and GXBB USB2 PHY driver
*
* Copyright (C) 2016 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
*
@@ -266,6 +266,7 @@ static int phy_meson8b_usb2_probe(struct platform_device *pdev)
}
static const struct of_device_id phy_meson8b_usb2_of_match[] = {
+ { .compatible = "amlogic,meson8-usb2-phy", },
{ .compatible = "amlogic,meson8b-usb2-phy", },
{ .compatible = "amlogic,meson-gxbb-usb2-phy", },
{ },
@@ -282,5 +283,5 @@ static struct platform_driver phy_meson8b_usb2_driver = {
module_platform_driver(phy_meson8b_usb2_driver);
MODULE_AUTHOR("Martin Blumenstingl <martin.blumenstingl@googlemail.com>");
-MODULE_DESCRIPTION("Meson8b and GXBB USB2 PHY driver");
+MODULE_DESCRIPTION("Meson8, Meson8b and GXBB USB2 PHY driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/phy/broadcom/Kconfig b/drivers/phy/broadcom/Kconfig
new file mode 100644
index 0000000..37371b8
--- /dev/null
+++ b/drivers/phy/broadcom/Kconfig
@@ -0,0 +1,69 @@
+#
+# Phy drivers for Broadcom platforms
+#
+config PHY_CYGNUS_PCIE
+ tristate "Broadcom Cygnus PCIe PHY driver"
+ depends on OF && (ARCH_BCM_CYGNUS || COMPILE_TEST)
+ select GENERIC_PHY
+ default ARCH_BCM_CYGNUS
+ help
+ Enable this to support the Broadcom Cygnus PCIe PHY.
+ If unsure, say N.
+
+config BCM_KONA_USB2_PHY
+ tristate "Broadcom Kona USB2 PHY Driver"
+ depends on HAS_IOMEM
+ select GENERIC_PHY
+ help
+ Enable this to support the Broadcom Kona USB 2.0 PHY.
+
+config PHY_BCM_NS_USB2
+ tristate "Broadcom Northstar USB 2.0 PHY Driver"
+ depends on ARCH_BCM_IPROC || COMPILE_TEST
+ depends on HAS_IOMEM && OF
+ select GENERIC_PHY
+ help
+ Enable this to support Broadcom USB 2.0 PHY connected to the USB
+ controller on Northstar family.
+
+config PHY_BCM_NS_USB3
+ tristate "Broadcom Northstar USB 3.0 PHY Driver"
+ depends on ARCH_BCM_IPROC || COMPILE_TEST
+ depends on HAS_IOMEM && OF
+ select GENERIC_PHY
+ select MDIO_DEVICE
+ help
+ Enable this to support Broadcom USB 3.0 PHY connected to the USB
+ controller on Northstar family.
+
+config PHY_NS2_PCIE
+ tristate "Broadcom Northstar2 PCIe PHY driver"
+ depends on OF && MDIO_BUS_MUX_BCM_IPROC
+ select GENERIC_PHY
+ default ARCH_BCM_IPROC
+ help
+ Enable this to support the Broadcom Northstar2 PCIe PHY.
+ If unsure, say N.
+
+config PHY_NS2_USB_DRD
+ tristate "Broadcom Northstar2 USB DRD PHY support"
+ depends on OF && (ARCH_BCM_IPROC || COMPILE_TEST)
+ select GENERIC_PHY
+ select EXTCON
+ default ARCH_BCM_IPROC
+ help
+ Enable this to support the Broadcom Northstar2 USB DRD PHY.
+ This driver initializes the PHY in either HOST or DEVICE mode.
+ The host or device configuration is read from device tree.
+
+ If unsure, say N.
+
+config PHY_BRCM_SATA
+ tristate "Broadcom SATA PHY driver"
+ depends on ARCH_BRCMSTB || ARCH_BCM_IPROC || BMIPS_GENERIC || COMPILE_TEST
+ depends on OF
+ select GENERIC_PHY
+ default ARCH_BCM_IPROC
+ help
+ Enable this to support the Broadcom SATA PHY.
+ If unsure, say N.
diff --git a/drivers/phy/broadcom/Makefile b/drivers/phy/broadcom/Makefile
new file mode 100644
index 0000000..4eb82ec
--- /dev/null
+++ b/drivers/phy/broadcom/Makefile
@@ -0,0 +1,7 @@
+obj-$(CONFIG_PHY_CYGNUS_PCIE) += phy-bcm-cygnus-pcie.o
+obj-$(CONFIG_BCM_KONA_USB2_PHY) += phy-bcm-kona-usb2.o
+obj-$(CONFIG_PHY_BCM_NS_USB2) += phy-bcm-ns-usb2.o
+obj-$(CONFIG_PHY_BCM_NS_USB3) += phy-bcm-ns-usb3.o
+obj-$(CONFIG_PHY_NS2_PCIE) += phy-bcm-ns2-pcie.o
+obj-$(CONFIG_PHY_NS2_USB_DRD) += phy-bcm-ns2-usbdrd.o
+obj-$(CONFIG_PHY_BRCM_SATA) += phy-brcm-sata.o
diff --git a/drivers/phy/phy-bcm-cygnus-pcie.c b/drivers/phy/broadcom/phy-bcm-cygnus-pcie.c
similarity index 100%
rename from drivers/phy/phy-bcm-cygnus-pcie.c
rename to drivers/phy/broadcom/phy-bcm-cygnus-pcie.c
diff --git a/drivers/phy/phy-bcm-kona-usb2.c b/drivers/phy/broadcom/phy-bcm-kona-usb2.c
similarity index 100%
rename from drivers/phy/phy-bcm-kona-usb2.c
rename to drivers/phy/broadcom/phy-bcm-kona-usb2.c
diff --git a/drivers/phy/phy-bcm-ns-usb2.c b/drivers/phy/broadcom/phy-bcm-ns-usb2.c
similarity index 100%
rename from drivers/phy/phy-bcm-ns-usb2.c
rename to drivers/phy/broadcom/phy-bcm-ns-usb2.c
diff --git a/drivers/phy/phy-bcm-ns-usb3.c b/drivers/phy/broadcom/phy-bcm-ns-usb3.c
similarity index 70%
rename from drivers/phy/phy-bcm-ns-usb3.c
rename to drivers/phy/broadcom/phy-bcm-ns-usb3.c
index 22b5e70..a53ae12 100644
--- a/drivers/phy/phy-bcm-ns-usb3.c
+++ b/drivers/phy/broadcom/phy-bcm-ns-usb3.c
@@ -16,7 +16,9 @@
#include <linux/bcma/bcma.h>
#include <linux/delay.h>
#include <linux/err.h>
+#include <linux/mdio.h>
#include <linux/module.h>
+#include <linux/of_address.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <linux/phy/phy.h>
@@ -52,7 +54,10 @@ struct bcm_ns_usb3 {
enum bcm_ns_family family;
void __iomem *dmp;
void __iomem *ccb_mii;
+ struct mdio_device *mdiodev;
struct phy *phy;
+
+ int (*phy_write)(struct bcm_ns_usb3 *usb3, u16 reg, u16 value);
};
static const struct of_device_id bcm_ns_usb3_id_table[] = {
@@ -68,63 +73,16 @@ static const struct of_device_id bcm_ns_usb3_id_table[] = {
};
MODULE_DEVICE_TABLE(of, bcm_ns_usb3_id_table);
-static int bcm_ns_usb3_wait_reg(struct bcm_ns_usb3 *usb3, void __iomem *addr,
- u32 mask, u32 value, unsigned long timeout)
-{
- unsigned long deadline = jiffies + timeout;
- u32 val;
-
- do {
- val = readl(addr);
- if ((val & mask) == value)
- return 0;
- cpu_relax();
- udelay(10);
- } while (!time_after_eq(jiffies, deadline));
-
- dev_err(usb3->dev, "Timeout waiting for register %p\n", addr);
-
- return -EBUSY;
-}
-
-static inline int bcm_ns_usb3_mii_mng_wait_idle(struct bcm_ns_usb3 *usb3)
-{
- return bcm_ns_usb3_wait_reg(usb3, usb3->ccb_mii + BCMA_CCB_MII_MNG_CTL,
- 0x0100, 0x0000,
- usecs_to_jiffies(BCM_NS_USB3_MII_MNG_TIMEOUT_US));
-}
-
static int bcm_ns_usb3_mdio_phy_write(struct bcm_ns_usb3 *usb3, u16 reg,
u16 value)
{
- u32 tmp = 0;
- int err;
-
- err = bcm_ns_usb3_mii_mng_wait_idle(usb3);
- if (err < 0) {
- dev_err(usb3->dev, "Couldn't write 0x%08x value\n", value);
- return err;
- }
-
- /* TODO: Use a proper MDIO bus layer */
- tmp |= 0x58020000; /* Magic value for MDIO PHY write */
- tmp |= reg << 18;
- tmp |= value;
- writel(tmp, usb3->ccb_mii + BCMA_CCB_MII_MNG_CMD_DATA);
-
- return 0;
+ return usb3->phy_write(usb3, reg, value);
}
static int bcm_ns_usb3_phy_init_ns_bx(struct bcm_ns_usb3 *usb3)
{
int err;
- /* Enable MDIO. Setting MDCDIV as 26 */
- writel(0x0000009a, usb3->ccb_mii + BCMA_CCB_MII_MNG_CTL);
-
- /* Wait for MDIO? */
- udelay(2);
-
/* USB3 PLL Block */
err = bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PHY_BASE_ADDR_REG,
BCM_NS_USB3_PHY_PLL30_BLOCK);
@@ -143,9 +101,6 @@ static int bcm_ns_usb3_phy_init_ns_bx(struct bcm_ns_usb3 *usb3)
/* Deaaserting PLL Reset */
bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PLLA_CONTROL1, 0x8000);
- /* Waiting MII Mgt interface idle */
- bcm_ns_usb3_mii_mng_wait_idle(usb3);
-
/* Deasserting USB3 system reset */
writel(0, usb3->dmp + BCMA_RESET_CTL);
@@ -169,9 +124,6 @@ static int bcm_ns_usb3_phy_init_ns_bx(struct bcm_ns_usb3 *usb3)
/* Enabling SSC */
bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_TX_PMD_CONTROL1, 0x1003);
- /* Waiting MII Mgt interface idle */
- bcm_ns_usb3_mii_mng_wait_idle(usb3);
-
return 0;
}
@@ -179,12 +131,6 @@ static int bcm_ns_usb3_phy_init_ns_ax(struct bcm_ns_usb3 *usb3)
{
int err;
- /* Enable MDIO. Setting MDCDIV as 26 */
- writel(0x0000009a, usb3->ccb_mii + BCMA_CCB_MII_MNG_CTL);
-
- /* Wait for MDIO? */
- udelay(2);
-
/* PLL30 block */
err = bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PHY_BASE_ADDR_REG,
BCM_NS_USB3_PHY_PLL30_BLOCK);
@@ -205,9 +151,6 @@ static int bcm_ns_usb3_phy_init_ns_ax(struct bcm_ns_usb3 *usb3)
bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_TX_PMD_CONTROL1, 0x1003);
- /* Waiting MII Mgt interface idle */
- bcm_ns_usb3_mii_mng_wait_idle(usb3);
-
/* Deasserting USB3 system reset */
writel(0, usb3->dmp + BCMA_RESET_CTL);
@@ -242,6 +185,128 @@ static const struct phy_ops ops = {
.owner = THIS_MODULE,
};
+/**************************************************
+ * MDIO driver code
+ **************************************************/
+
+static int bcm_ns_usb3_mdiodev_phy_write(struct bcm_ns_usb3 *usb3, u16 reg,
+ u16 value)
+{
+ struct mdio_device *mdiodev = usb3->mdiodev;
+
+ return mdiobus_write(mdiodev->bus, mdiodev->addr, reg, value);
+}
+
+static int bcm_ns_usb3_mdio_probe(struct mdio_device *mdiodev)
+{
+ struct device *dev = &mdiodev->dev;
+ const struct of_device_id *of_id;
+ struct phy_provider *phy_provider;
+ struct device_node *syscon_np;
+ struct bcm_ns_usb3 *usb3;
+ struct resource res;
+ int err;
+
+ usb3 = devm_kzalloc(dev, sizeof(*usb3), GFP_KERNEL);
+ if (!usb3)
+ return -ENOMEM;
+
+ usb3->dev = dev;
+ usb3->mdiodev = mdiodev;
+
+ of_id = of_match_device(bcm_ns_usb3_id_table, dev);
+ if (!of_id)
+ return -EINVAL;
+ usb3->family = (enum bcm_ns_family)of_id->data;
+
+ syscon_np = of_parse_phandle(dev->of_node, "usb3-dmp-syscon", 0);
+ err = of_address_to_resource(syscon_np, 0, &res);
+ of_node_put(syscon_np);
+ if (err)
+ return err;
+
+ usb3->dmp = devm_ioremap_resource(dev, &res);
+ if (IS_ERR(usb3->dmp)) {
+ dev_err(dev, "Failed to map DMP regs\n");
+ return PTR_ERR(usb3->dmp);
+ }
+
+ usb3->phy_write = bcm_ns_usb3_mdiodev_phy_write;
+
+ usb3->phy = devm_phy_create(dev, NULL, &ops);
+ if (IS_ERR(usb3->phy)) {
+ dev_err(dev, "Failed to create PHY\n");
+ return PTR_ERR(usb3->phy);
+ }
+
+ phy_set_drvdata(usb3->phy, usb3);
+
+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+ return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static struct mdio_driver bcm_ns_usb3_mdio_driver = {
+ .mdiodrv = {
+ .driver = {
+ .name = "bcm_ns_mdio_usb3",
+ .of_match_table = bcm_ns_usb3_id_table,
+ },
+ },
+ .probe = bcm_ns_usb3_mdio_probe,
+};
+
+/**************************************************
+ * Platform driver code
+ **************************************************/
+
+static int bcm_ns_usb3_wait_reg(struct bcm_ns_usb3 *usb3, void __iomem *addr,
+ u32 mask, u32 value, unsigned long timeout)
+{
+ unsigned long deadline = jiffies + timeout;
+ u32 val;
+
+ do {
+ val = readl(addr);
+ if ((val & mask) == value)
+ return 0;
+ cpu_relax();
+ udelay(10);
+ } while (!time_after_eq(jiffies, deadline));
+
+ dev_err(usb3->dev, "Timeout waiting for register %p\n", addr);
+
+ return -EBUSY;
+}
+
+static inline int bcm_ns_usb3_mii_mng_wait_idle(struct bcm_ns_usb3 *usb3)
+{
+ return bcm_ns_usb3_wait_reg(usb3, usb3->ccb_mii + BCMA_CCB_MII_MNG_CTL,
+ 0x0100, 0x0000,
+ usecs_to_jiffies(BCM_NS_USB3_MII_MNG_TIMEOUT_US));
+}
+
+static int bcm_ns_usb3_platform_phy_write(struct bcm_ns_usb3 *usb3, u16 reg,
+ u16 value)
+{
+ u32 tmp = 0;
+ int err;
+
+ err = bcm_ns_usb3_mii_mng_wait_idle(usb3);
+ if (err < 0) {
+ dev_err(usb3->dev, "Couldn't write 0x%08x value\n", value);
+ return err;
+ }
+
+ /* TODO: Use a proper MDIO bus layer */
+ tmp |= 0x58020000; /* Magic value for MDIO PHY write */
+ tmp |= reg << 18;
+ tmp |= value;
+ writel(tmp, usb3->ccb_mii + BCMA_CCB_MII_MNG_CMD_DATA);
+
+ return bcm_ns_usb3_mii_mng_wait_idle(usb3);
+}
+
static int bcm_ns_usb3_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -275,6 +340,14 @@ static int bcm_ns_usb3_probe(struct platform_device *pdev)
return PTR_ERR(usb3->ccb_mii);
}
+ /* Enable MDIO. Setting MDCDIV as 26 */
+ writel(0x0000009a, usb3->ccb_mii + BCMA_CCB_MII_MNG_CTL);
+
+ /* Wait for MDIO? */
+ udelay(2);
+
+ usb3->phy_write = bcm_ns_usb3_platform_phy_write;
+
usb3->phy = devm_phy_create(dev, NULL, &ops);
if (IS_ERR(usb3->phy)) {
dev_err(dev, "Failed to create PHY\n");
@@ -298,6 +371,35 @@ static struct platform_driver bcm_ns_usb3_driver = {
.of_match_table = bcm_ns_usb3_id_table,
},
};
-module_platform_driver(bcm_ns_usb3_driver);
+
+static int __init bcm_ns_usb3_module_init(void)
+{
+ int err;
+
+ /*
+ * For backward compatibility we register as MDIO and platform driver.
+ * After getting MDIO binding commonly used (e.g. switching all DT files
+ * to use it) we should deprecate the old binding and eventually drop
+ * support for it.
+ */
+
+ err = mdio_driver_register(&bcm_ns_usb3_mdio_driver);
+ if (err)
+ return err;
+
+ err = platform_driver_register(&bcm_ns_usb3_driver);
+ if (err)
+ mdio_driver_unregister(&bcm_ns_usb3_mdio_driver);
+
+ return err;
+}
+module_init(bcm_ns_usb3_module_init);
+
+static void __exit bcm_ns_usb3_module_exit(void)
+{
+ platform_driver_unregister(&bcm_ns_usb3_driver);
+ mdio_driver_unregister(&bcm_ns_usb3_mdio_driver);
+}
+module_exit(bcm_ns_usb3_module_exit)
MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/phy-bcm-ns2-pcie.c b/drivers/phy/broadcom/phy-bcm-ns2-pcie.c
similarity index 100%
rename from drivers/phy/phy-bcm-ns2-pcie.c
rename to drivers/phy/broadcom/phy-bcm-ns2-pcie.c
diff --git a/drivers/phy/broadcom/phy-bcm-ns2-usbdrd.c b/drivers/phy/broadcom/phy-bcm-ns2-usbdrd.c
new file mode 100644
index 0000000..9ae59e2
--- /dev/null
+++ b/drivers/phy/broadcom/phy-bcm-ns2-usbdrd.c
@@ -0,0 +1,437 @@
+/*
+ * Copyright (C) 2017 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/extcon.h>
+#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+
+#define ICFG_DRD_AFE 0x0
+#define ICFG_MISC_STAT 0x18
+#define ICFG_DRD_P0CTL 0x1C
+#define ICFG_STRAP_CTRL 0x20
+#define ICFG_FSM_CTRL 0x24
+
+#define ICFG_DEV_BIT BIT(2)
+#define IDM_RST_BIT BIT(0)
+#define AFE_CORERDY_VDDC BIT(18)
+#define PHY_PLL_RESETB BIT(15)
+#define PHY_RESETB BIT(14)
+#define PHY_PLL_LOCK BIT(0)
+
+#define DRD_DEV_MODE BIT(20)
+#define OHCI_OVRCUR_POL BIT(11)
+#define ICFG_OFF_MODE BIT(6)
+#define PLL_LOCK_RETRY 1000
+
+#define EVT_DEVICE 0
+#define EVT_HOST 1
+
+#define DRD_HOST_MODE (BIT(2) | BIT(3))
+#define DRD_DEVICE_MODE (BIT(4) | BIT(5))
+#define DRD_HOST_VAL 0x803
+#define DRD_DEV_VAL 0x807
+#define GPIO_DELAY 20
+
+struct ns2_phy_data;
+struct ns2_phy_driver {
+ void __iomem *icfgdrd_regs;
+ void __iomem *idmdrd_rst_ctrl;
+ void __iomem *crmu_usb2_ctrl;
+ void __iomem *usb2h_strap_reg;
+ struct ns2_phy_data *data;
+ struct extcon_dev *edev;
+ struct gpio_desc *vbus_gpiod;
+ struct gpio_desc *id_gpiod;
+ int id_irq;
+ int vbus_irq;
+ unsigned long debounce_jiffies;
+ struct delayed_work wq_extcon;
+};
+
+struct ns2_phy_data {
+ struct ns2_phy_driver *driver;
+ struct phy *phy;
+ int new_state;
+};
+
+static const unsigned int usb_extcon_cable[] = {
+ EXTCON_USB,
+ EXTCON_USB_HOST,
+ EXTCON_NONE,
+};
+
+static inline int pll_lock_stat(u32 usb_reg, int reg_mask,
+ struct ns2_phy_driver *driver)
+{
+ int retry = PLL_LOCK_RETRY;
+ u32 val;
+
+ do {
+ udelay(1);
+ val = readl(driver->icfgdrd_regs + usb_reg);
+ if (val & reg_mask)
+ return 0;
+ } while (--retry > 0);
+
+ return -EBUSY;
+}
+
+static int ns2_drd_phy_init(struct phy *phy)
+{
+ struct ns2_phy_data *data = phy_get_drvdata(phy);
+ struct ns2_phy_driver *driver = data->driver;
+ u32 val;
+
+ val = readl(driver->icfgdrd_regs + ICFG_FSM_CTRL);
+
+ if (data->new_state == EVT_HOST) {
+ val &= ~DRD_DEVICE_MODE;
+ val |= DRD_HOST_MODE;
+ } else {
+ val &= ~DRD_HOST_MODE;
+ val |= DRD_DEVICE_MODE;
+ }
+ writel(val, driver->icfgdrd_regs + ICFG_FSM_CTRL);
+
+ return 0;
+}
+
+static int ns2_drd_phy_poweroff(struct phy *phy)
+{
+ struct ns2_phy_data *data = phy_get_drvdata(phy);
+ struct ns2_phy_driver *driver = data->driver;
+ u32 val;
+
+ val = readl(driver->crmu_usb2_ctrl);
+ val &= ~AFE_CORERDY_VDDC;
+ writel(val, driver->crmu_usb2_ctrl);
+
+ val = readl(driver->crmu_usb2_ctrl);
+ val &= ~DRD_DEV_MODE;
+ writel(val, driver->crmu_usb2_ctrl);
+
+ /* Disable Host and Device Mode */
+ val = readl(driver->icfgdrd_regs + ICFG_FSM_CTRL);
+ val &= ~(DRD_HOST_MODE | DRD_DEVICE_MODE | ICFG_OFF_MODE);
+ writel(val, driver->icfgdrd_regs + ICFG_FSM_CTRL);
+
+ return 0;
+}
+
+static int ns2_drd_phy_poweron(struct phy *phy)
+{
+ struct ns2_phy_data *data = phy_get_drvdata(phy);
+ struct ns2_phy_driver *driver = data->driver;
+ u32 extcon_event = data->new_state;
+ int ret;
+ u32 val;
+
+ if (extcon_event == EVT_DEVICE) {
+ writel(DRD_DEV_VAL, driver->icfgdrd_regs + ICFG_DRD_P0CTL);
+
+ val = readl(driver->idmdrd_rst_ctrl);
+ val &= ~IDM_RST_BIT;
+ writel(val, driver->idmdrd_rst_ctrl);
+
+ val = readl(driver->crmu_usb2_ctrl);
+ val |= (AFE_CORERDY_VDDC | DRD_DEV_MODE);
+ writel(val, driver->crmu_usb2_ctrl);
+
+ /* Bring PHY and PHY_PLL out of Reset */
+ val = readl(driver->crmu_usb2_ctrl);
+ val |= (PHY_PLL_RESETB | PHY_RESETB);
+ writel(val, driver->crmu_usb2_ctrl);
+
+ ret = pll_lock_stat(ICFG_MISC_STAT, PHY_PLL_LOCK, driver);
+ if (ret < 0) {
+ dev_err(&phy->dev, "Phy PLL lock failed\n");
+ return ret;
+ }
+ } else {
+ writel(DRD_HOST_VAL, driver->icfgdrd_regs + ICFG_DRD_P0CTL);
+
+ val = readl(driver->crmu_usb2_ctrl);
+ val |= AFE_CORERDY_VDDC;
+ writel(val, driver->crmu_usb2_ctrl);
+
+ ret = pll_lock_stat(ICFG_MISC_STAT, PHY_PLL_LOCK, driver);
+ if (ret < 0) {
+ dev_err(&phy->dev, "Phy PLL lock failed\n");
+ return ret;
+ }
+
+ val = readl(driver->idmdrd_rst_ctrl);
+ val &= ~IDM_RST_BIT;
+ writel(val, driver->idmdrd_rst_ctrl);
+
+ /* port over current Polarity */
+ val = readl(driver->usb2h_strap_reg);
+ val |= OHCI_OVRCUR_POL;
+ writel(val, driver->usb2h_strap_reg);
+ }
+
+ return 0;
+}
+
+static void connect_change(struct ns2_phy_driver *driver)
+{
+ u32 extcon_event;
+ u32 val;
+
+ extcon_event = driver->data->new_state;
+ val = readl(driver->icfgdrd_regs + ICFG_FSM_CTRL);
+
+ switch (extcon_event) {
+ case EVT_DEVICE:
+ val &= ~(DRD_HOST_MODE | DRD_DEVICE_MODE);
+ writel(val, driver->icfgdrd_regs + ICFG_FSM_CTRL);
+
+ val = (val & ~DRD_HOST_MODE) | DRD_DEVICE_MODE;
+ writel(val, driver->icfgdrd_regs + ICFG_FSM_CTRL);
+
+ val = readl(driver->icfgdrd_regs + ICFG_DRD_P0CTL);
+ val |= ICFG_DEV_BIT;
+ writel(val, driver->icfgdrd_regs + ICFG_DRD_P0CTL);
+ break;
+
+ case EVT_HOST:
+ val &= ~(DRD_HOST_MODE | DRD_DEVICE_MODE);
+ writel(val, driver->icfgdrd_regs + ICFG_FSM_CTRL);
+
+ val = (val & ~DRD_DEVICE_MODE) | DRD_HOST_MODE;
+ writel(val, driver->icfgdrd_regs + ICFG_FSM_CTRL);
+
+ val = readl(driver->usb2h_strap_reg);
+ val |= OHCI_OVRCUR_POL;
+ writel(val, driver->usb2h_strap_reg);
+
+ val = readl(driver->icfgdrd_regs + ICFG_DRD_P0CTL);
+ val &= ~ICFG_DEV_BIT;
+ writel(val, driver->icfgdrd_regs + ICFG_DRD_P0CTL);
+ break;
+
+ default:
+ pr_err("Invalid extcon event\n");
+ break;
+ }
+}
+
+static void extcon_work(struct work_struct *work)
+{
+ struct ns2_phy_driver *driver;
+ int vbus;
+ int id;
+
+ driver = container_of(to_delayed_work(work),
+ struct ns2_phy_driver, wq_extcon);
+
+ id = gpiod_get_value_cansleep(driver->id_gpiod);
+ vbus = gpiod_get_value_cansleep(driver->vbus_gpiod);
+
+ if (!id && vbus) { /* Host connected */
+ extcon_set_cable_state_(driver->edev, EXTCON_USB_HOST, true);
+ pr_debug("Host cable connected\n");
+ driver->data->new_state = EVT_HOST;
+ connect_change(driver);
+ } else if (id && !vbus) { /* Disconnected */
+ extcon_set_cable_state_(driver->edev, EXTCON_USB_HOST, false);
+ extcon_set_cable_state_(driver->edev, EXTCON_USB, false);
+ pr_debug("Cable disconnected\n");
+ } else if (id && vbus) { /* Device connected */
+ extcon_set_cable_state_(driver->edev, EXTCON_USB, true);
+ pr_debug("Device cable connected\n");
+ driver->data->new_state = EVT_DEVICE;
+ connect_change(driver);
+ }
+}
+
+static irqreturn_t gpio_irq_handler(int irq, void *dev_id)
+{
+ struct ns2_phy_driver *driver = dev_id;
+
+ queue_delayed_work(system_power_efficient_wq, &driver->wq_extcon,
+ driver->debounce_jiffies);
+
+ return IRQ_HANDLED;
+}
+
+static struct phy_ops ops = {
+ .init = ns2_drd_phy_init,
+ .power_on = ns2_drd_phy_poweron,
+ .power_off = ns2_drd_phy_poweroff,
+ .owner = THIS_MODULE,
+};
+
+static const struct of_device_id ns2_drd_phy_dt_ids[] = {
+ { .compatible = "brcm,ns2-drd-phy", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, ns2_drd_phy_dt_ids);
+
+static int ns2_drd_phy_probe(struct platform_device *pdev)
+{
+ struct phy_provider *phy_provider;
+ struct device *dev = &pdev->dev;
+ struct ns2_phy_driver *driver;
+ struct ns2_phy_data *data;
+ struct resource *res;
+ int ret;
+ u32 val;
+
+ driver = devm_kzalloc(dev, sizeof(struct ns2_phy_driver),
+ GFP_KERNEL);
+ if (!driver)
+ return -ENOMEM;
+
+ driver->data = devm_kzalloc(dev, sizeof(struct ns2_phy_data),
+ GFP_KERNEL);
+ if (!driver->data)
+ return -ENOMEM;
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "icfg");
+ driver->icfgdrd_regs = devm_ioremap_resource(dev, res);
+ if (IS_ERR(driver->icfgdrd_regs))
+ return PTR_ERR(driver->icfgdrd_regs);
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rst-ctrl");
+ driver->idmdrd_rst_ctrl = devm_ioremap_resource(dev, res);
+ if (IS_ERR(driver->idmdrd_rst_ctrl))
+ return PTR_ERR(driver->idmdrd_rst_ctrl);
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "crmu-ctrl");
+ driver->crmu_usb2_ctrl = devm_ioremap_resource(dev, res);
+ if (IS_ERR(driver->crmu_usb2_ctrl))
+ return PTR_ERR(driver->crmu_usb2_ctrl);
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "usb2-strap");
+ driver->usb2h_strap_reg = devm_ioremap_resource(dev, res);
+ if (IS_ERR(driver->usb2h_strap_reg))
+ return PTR_ERR(driver->usb2h_strap_reg);
+
+ /* create extcon */
+ driver->id_gpiod = devm_gpiod_get(&pdev->dev, "id", GPIOD_IN);
+ if (IS_ERR(driver->id_gpiod)) {
+ dev_err(dev, "failed to get ID GPIO\n");
+ return PTR_ERR(driver->id_gpiod);
+ }
+ driver->vbus_gpiod = devm_gpiod_get(&pdev->dev, "vbus", GPIOD_IN);
+ if (IS_ERR(driver->vbus_gpiod)) {
+ dev_err(dev, "failed to get VBUS GPIO\n");
+ return PTR_ERR(driver->vbus_gpiod);
+ }
+
+ driver->edev = devm_extcon_dev_allocate(dev, usb_extcon_cable);
+ if (IS_ERR(driver->edev)) {
+ dev_err(dev, "failed to allocate extcon device\n");
+ return -ENOMEM;
+ }
+
+ ret = devm_extcon_dev_register(dev, driver->edev);
+ if (ret < 0) {
+ dev_err(dev, "failed to register extcon device\n");
+ return ret;
+ }
+
+ ret = gpiod_set_debounce(driver->id_gpiod, GPIO_DELAY * 1000);
+ if (ret < 0)
+ driver->debounce_jiffies = msecs_to_jiffies(GPIO_DELAY);
+
+ INIT_DELAYED_WORK(&driver->wq_extcon, extcon_work);
+
+ driver->id_irq = gpiod_to_irq(driver->id_gpiod);
+ if (driver->id_irq < 0) {
+ dev_err(dev, "failed to get ID IRQ\n");
+ return driver->id_irq;
+ }
+
+ driver->vbus_irq = gpiod_to_irq(driver->vbus_gpiod);
+ if (driver->vbus_irq < 0) {
+ dev_err(dev, "failed to get ID IRQ\n");
+ return driver->vbus_irq;
+ }
+
+ ret = devm_request_irq(dev, driver->id_irq, gpio_irq_handler,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ "usb_id", driver);
+ if (ret < 0) {
+ dev_err(dev, "failed to request handler for ID IRQ\n");
+ return ret;
+ }
+
+ ret = devm_request_irq(dev, driver->vbus_irq, gpio_irq_handler,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ "usb_vbus", driver);
+ if (ret < 0) {
+ dev_err(dev, "failed to request handler for VBUS IRQ\n");
+ return ret;
+ }
+
+ dev_set_drvdata(dev, driver);
+
+ /* Shutdown all ports. They can be powered up as required */
+ val = readl(driver->crmu_usb2_ctrl);
+ val &= ~(AFE_CORERDY_VDDC | PHY_RESETB);
+ writel(val, driver->crmu_usb2_ctrl);
+
+ data = driver->data;
+ data->phy = devm_phy_create(dev, dev->of_node, &ops);
+ if (IS_ERR(data->phy)) {
+ dev_err(dev, "Failed to create usb drd phy\n");
+ return PTR_ERR(data->phy);
+ }
+
+ data->driver = driver;
+ phy_set_drvdata(data->phy, data);
+
+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+ if (IS_ERR(phy_provider)) {
+ dev_err(dev, "Failed to register as phy provider\n");
+ return PTR_ERR(phy_provider);
+ }
+
+ platform_set_drvdata(pdev, driver);
+
+ dev_info(dev, "Registered NS2 DRD Phy device\n");
+ queue_delayed_work(system_power_efficient_wq, &driver->wq_extcon,
+ driver->debounce_jiffies);
+
+ return 0;
+}
+
+static struct platform_driver ns2_drd_phy_driver = {
+ .probe = ns2_drd_phy_probe,
+ .driver = {
+ .name = "bcm-ns2-usbphy",
+ .of_match_table = of_match_ptr(ns2_drd_phy_dt_ids),
+ },
+};
+module_platform_driver(ns2_drd_phy_driver);
+
+MODULE_ALIAS("platform:bcm-ns2-drd-phy");
+MODULE_AUTHOR("Broadcom");
+MODULE_DESCRIPTION("Broadcom NS2 USB2 PHY driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/phy-brcm-sata.c b/drivers/phy/broadcom/phy-brcm-sata.c
similarity index 85%
rename from drivers/phy/phy-brcm-sata.c
rename to drivers/phy/broadcom/phy-brcm-sata.c
index ccbc3d9..e6544c8 100644
--- a/drivers/phy/phy-brcm-sata.c
+++ b/drivers/phy/broadcom/phy-brcm-sata.c
@@ -46,6 +46,7 @@ enum brcm_sata_phy_version {
BRCM_SATA_PHY_STB_40NM,
BRCM_SATA_PHY_IPROC_NS2,
BRCM_SATA_PHY_IPROC_NSP,
+ BRCM_SATA_PHY_IPROC_SR,
};
struct brcm_sata_port {
@@ -81,12 +82,17 @@ enum sata_phy_regs {
PLL_ACTRL2 = 0x8b,
PLL_ACTRL2_SELDIV_MASK = 0x1f,
PLL_ACTRL2_SELDIV_SHIFT = 9,
+ PLL_ACTRL6 = 0x86,
PLL1_REG_BANK = 0x060,
PLL1_ACTRL2 = 0x82,
PLL1_ACTRL3 = 0x83,
PLL1_ACTRL4 = 0x84,
+ TX_REG_BANK = 0x070,
+ TX_ACTRL0 = 0x80,
+ TX_ACTRL0_TXPOL_FLIP = BIT(6),
+
OOB_REG_BANK = 0x150,
OOB1_REG_BANK = 0x160,
OOB_CTRL1 = 0x80,
@@ -347,6 +353,68 @@ static int brcm_nsp_sata_init(struct brcm_sata_port *port)
return 0;
}
+/* SR PHY PLL0 registers */
+#define SR_PLL0_ACTRL6_MAGIC 0xa
+
+/* SR PHY PLL1 registers */
+#define SR_PLL1_ACTRL2_MAGIC 0x32
+#define SR_PLL1_ACTRL3_MAGIC 0x2
+#define SR_PLL1_ACTRL4_MAGIC 0x3e8
+
+static int brcm_sr_sata_init(struct brcm_sata_port *port)
+{
+ struct brcm_sata_phy *priv = port->phy_priv;
+ struct device *dev = port->phy_priv->dev;
+ void __iomem *base = priv->phy_base;
+ unsigned int val, try;
+
+ /* Configure PHY PLL register bank 1 */
+ val = SR_PLL1_ACTRL2_MAGIC;
+ brcm_sata_phy_wr(base, PLL1_REG_BANK, PLL1_ACTRL2, 0x0, val);
+ val = SR_PLL1_ACTRL3_MAGIC;
+ brcm_sata_phy_wr(base, PLL1_REG_BANK, PLL1_ACTRL3, 0x0, val);
+ val = SR_PLL1_ACTRL4_MAGIC;
+ brcm_sata_phy_wr(base, PLL1_REG_BANK, PLL1_ACTRL4, 0x0, val);
+
+ /* Configure PHY PLL register bank 0 */
+ val = SR_PLL0_ACTRL6_MAGIC;
+ brcm_sata_phy_wr(base, PLL_REG_BANK_0, PLL_ACTRL6, 0x0, val);
+
+ /* Wait for PHY PLL lock by polling pll_lock bit */
+ try = 50;
+ do {
+ val = brcm_sata_phy_rd(base, BLOCK0_REG_BANK,
+ BLOCK0_XGXSSTATUS);
+ if (val & BLOCK0_XGXSSTATUS_PLL_LOCK)
+ break;
+ msleep(20);
+ try--;
+ } while (try);
+
+ if ((val & BLOCK0_XGXSSTATUS_PLL_LOCK) == 0) {
+ /* PLL did not lock; give up */
+ dev_err(dev, "port%d PLL did not lock\n", port->portnum);
+ return -ETIMEDOUT;
+ }
+
+ /* Invert Tx polarity */
+ brcm_sata_phy_wr(base, TX_REG_BANK, TX_ACTRL0,
+ ~TX_ACTRL0_TXPOL_FLIP, TX_ACTRL0_TXPOL_FLIP);
+
+ /* Configure OOB control to handle 100MHz reference clock */
+ val = ((0xc << OOB_CTRL1_BURST_MAX_SHIFT) |
+ (0x4 << OOB_CTRL1_BURST_MIN_SHIFT) |
+ (0x8 << OOB_CTRL1_WAKE_IDLE_MAX_SHIFT) |
+ (0x3 << OOB_CTRL1_WAKE_IDLE_MIN_SHIFT));
+ brcm_sata_phy_wr(base, OOB_REG_BANK, OOB_CTRL1, 0x0, val);
+ val = ((0x1b << OOB_CTRL2_RESET_IDLE_MAX_SHIFT) |
+ (0x2 << OOB_CTRL2_BURST_CNT_SHIFT) |
+ (0x9 << OOB_CTRL2_RESET_IDLE_MIN_SHIFT));
+ brcm_sata_phy_wr(base, OOB_REG_BANK, OOB_CTRL2, 0x0, val);
+
+ return 0;
+}
+
static int brcm_sata_phy_init(struct phy *phy)
{
int rc;
@@ -363,6 +431,9 @@ static int brcm_sata_phy_init(struct phy *phy)
case BRCM_SATA_PHY_IPROC_NSP:
rc = brcm_nsp_sata_init(port);
break;
+ case BRCM_SATA_PHY_IPROC_SR:
+ rc = brcm_sr_sata_init(port);
+ break;
default:
rc = -ENODEV;
}
@@ -384,6 +455,8 @@ static const struct of_device_id brcm_sata_phy_of_match[] = {
.data = (void *)BRCM_SATA_PHY_IPROC_NS2 },
{ .compatible = "brcm,iproc-nsp-sata-phy",
.data = (void *)BRCM_SATA_PHY_IPROC_NSP },
+ { .compatible = "brcm,iproc-sr-sata-phy",
+ .data = (void *)BRCM_SATA_PHY_IPROC_SR },
{},
};
MODULE_DEVICE_TABLE(of, brcm_sata_phy_of_match);
diff --git a/drivers/phy/hisilicon/Kconfig b/drivers/phy/hisilicon/Kconfig
new file mode 100644
index 0000000..6164c4c
--- /dev/null
+++ b/drivers/phy/hisilicon/Kconfig
@@ -0,0 +1,20 @@
+#
+# Phy drivers for Hisilicon platforms
+#
+config PHY_HI6220_USB
+ tristate "hi6220 USB PHY support"
+ depends on (ARCH_HISI && ARM64) || COMPILE_TEST
+ select GENERIC_PHY
+ select MFD_SYSCON
+ help
+ Enable this to support the HISILICON HI6220 USB PHY.
+
+ To compile this driver as a module, choose M here.
+
+config PHY_HIX5HD2_SATA
+ tristate "HIX5HD2 SATA PHY Driver"
+ depends on ARCH_HIX5HD2 && OF && HAS_IOMEM
+ select GENERIC_PHY
+ select MFD_SYSCON
+ help
+ Support for SATA PHY on Hisilicon hix5hd2 Soc.
diff --git a/drivers/phy/hisilicon/Makefile b/drivers/phy/hisilicon/Makefile
new file mode 100644
index 0000000..541b348
--- /dev/null
+++ b/drivers/phy/hisilicon/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_PHY_HI6220_USB) += phy-hi6220-usb.o
+obj-$(CONFIG_PHY_HIX5HD2_SATA) += phy-hix5hd2-sata.o
diff --git a/drivers/phy/phy-hi6220-usb.c b/drivers/phy/hisilicon/phy-hi6220-usb.c
similarity index 100%
rename from drivers/phy/phy-hi6220-usb.c
rename to drivers/phy/hisilicon/phy-hi6220-usb.c
diff --git a/drivers/phy/phy-hix5hd2-sata.c b/drivers/phy/hisilicon/phy-hix5hd2-sata.c
similarity index 100%
rename from drivers/phy/phy-hix5hd2-sata.c
rename to drivers/phy/hisilicon/phy-hix5hd2-sata.c
diff --git a/drivers/phy/marvell/Kconfig b/drivers/phy/marvell/Kconfig
new file mode 100644
index 0000000..048d889
--- /dev/null
+++ b/drivers/phy/marvell/Kconfig
@@ -0,0 +1,50 @@
+#
+# Phy drivers for Marvell platforms
+#
+config ARMADA375_USBCLUSTER_PHY
+ def_bool y
+ depends on MACH_ARMADA_375 || COMPILE_TEST
+ depends on OF && HAS_IOMEM
+ select GENERIC_PHY
+
+config PHY_BERLIN_SATA
+ tristate "Marvell Berlin SATA PHY driver"
+ depends on ARCH_BERLIN && HAS_IOMEM && OF
+ select GENERIC_PHY
+ help
+ Enable this to support the SATA PHY on Marvell Berlin SoCs.
+
+config PHY_BERLIN_USB
+ tristate "Marvell Berlin USB PHY Driver"
+ depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF
+ select GENERIC_PHY
+ help
+ Enable this to support the USB PHY on Marvell Berlin SoCs.
+
+config PHY_MVEBU_SATA
+ def_bool y
+ depends on ARCH_DOVE || MACH_DOVE || MACH_KIRKWOOD
+ depends on OF
+ select GENERIC_PHY
+
+config PHY_PXA_28NM_HSIC
+ tristate "Marvell USB HSIC 28nm PHY Driver"
+ depends on HAS_IOMEM
+ select GENERIC_PHY
+ help
+ Enable this to support Marvell USB HSIC PHY driver for Marvell
+ SoC. This driver will do the PHY initialization and shutdown.
+ The PHY driver will be used by Marvell ehci driver.
+
+ To compile this driver as a module, choose M here.
+
+config PHY_PXA_28NM_USB2
+ tristate "Marvell USB 2.0 28nm PHY Driver"
+ depends on HAS_IOMEM
+ select GENERIC_PHY
+ help
+ Enable this to support Marvell USB 2.0 PHY driver for Marvell
+ SoC. This driver will do the PHY initialization and shutdown.
+ The PHY driver will be used by Marvell udc/ehci/otg driver.
+
+ To compile this driver as a module, choose M here.
diff --git a/drivers/phy/marvell/Makefile b/drivers/phy/marvell/Makefile
new file mode 100644
index 0000000..3fc188f
--- /dev/null
+++ b/drivers/phy/marvell/Makefile
@@ -0,0 +1,6 @@
+obj-$(CONFIG_ARMADA375_USBCLUSTER_PHY) += phy-armada375-usb2.o
+obj-$(CONFIG_PHY_BERLIN_SATA) += phy-berlin-sata.o
+obj-$(CONFIG_PHY_BERLIN_USB) += phy-berlin-usb.o
+obj-$(CONFIG_PHY_MVEBU_SATA) += phy-mvebu-sata.o
+obj-$(CONFIG_PHY_PXA_28NM_HSIC) += phy-pxa-28nm-hsic.o
+obj-$(CONFIG_PHY_PXA_28NM_USB2) += phy-pxa-28nm-usb2.o
diff --git a/drivers/phy/phy-armada375-usb2.c b/drivers/phy/marvell/phy-armada375-usb2.c
similarity index 100%
rename from drivers/phy/phy-armada375-usb2.c
rename to drivers/phy/marvell/phy-armada375-usb2.c
diff --git a/drivers/phy/phy-berlin-sata.c b/drivers/phy/marvell/phy-berlin-sata.c
similarity index 100%
rename from drivers/phy/phy-berlin-sata.c
rename to drivers/phy/marvell/phy-berlin-sata.c
diff --git a/drivers/phy/phy-berlin-usb.c b/drivers/phy/marvell/phy-berlin-usb.c
similarity index 100%
rename from drivers/phy/phy-berlin-usb.c
rename to drivers/phy/marvell/phy-berlin-usb.c
diff --git a/drivers/phy/phy-mvebu-sata.c b/drivers/phy/marvell/phy-mvebu-sata.c
similarity index 100%
rename from drivers/phy/phy-mvebu-sata.c
rename to drivers/phy/marvell/phy-mvebu-sata.c
diff --git a/drivers/phy/phy-pxa-28nm-hsic.c b/drivers/phy/marvell/phy-pxa-28nm-hsic.c
similarity index 100%
rename from drivers/phy/phy-pxa-28nm-hsic.c
rename to drivers/phy/marvell/phy-pxa-28nm-hsic.c
diff --git a/drivers/phy/phy-pxa-28nm-usb2.c b/drivers/phy/marvell/phy-pxa-28nm-usb2.c
similarity index 100%
rename from drivers/phy/phy-pxa-28nm-usb2.c
rename to drivers/phy/marvell/phy-pxa-28nm-usb2.c
diff --git a/drivers/phy/motorola/Kconfig b/drivers/phy/motorola/Kconfig
new file mode 100644
index 0000000..6bb7d6b
--- /dev/null
+++ b/drivers/phy/motorola/Kconfig
@@ -0,0 +1,12 @@
+#
+# Phy drivers for Motorola devices
+#
+config PHY_CPCAP_USB
+ tristate "CPCAP PMIC USB PHY driver"
+ depends on USB_SUPPORT && IIO
+ depends on USB_MUSB_HDRC || USB_MUSB_HDRC=n
+ select GENERIC_PHY
+ select USB_PHY
+ help
+ Enable this for USB to work on Motorola phones and tablets
+ such as Droid 4.
diff --git a/drivers/phy/motorola/Makefile b/drivers/phy/motorola/Makefile
new file mode 100644
index 0000000..b6cd618
--- /dev/null
+++ b/drivers/phy/motorola/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the phy drivers.
+#
+
+obj-$(CONFIG_PHY_CPCAP_USB) += phy-cpcap-usb.o
diff --git a/drivers/phy/motorola/phy-cpcap-usb.c b/drivers/phy/motorola/phy-cpcap-usb.c
new file mode 100644
index 0000000..9b63efa
--- /dev/null
+++ b/drivers/phy/motorola/phy-cpcap-usb.c
@@ -0,0 +1,676 @@
+/*
+ * Motorola CPCAP PMIC USB PHY driver
+ * Copyright (C) 2017 Tony Lindgren <tony@atomide.com>
+ *
+ * Some parts based on earlier Motorola Linux kernel tree code in
+ * board-mapphone-usb.c and cpcap-usb-det.c:
+ * Copyright (C) 2007 - 2011 Motorola, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/atomic.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/iio/consumer.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#include <linux/gpio/consumer.h>
+#include <linux/mfd/motorola-cpcap.h>
+#include <linux/phy/omap_usb.h>
+#include <linux/phy/phy.h>
+#include <linux/regulator/consumer.h>
+#include <linux/usb/musb.h>
+
+/* CPCAP_REG_USBC1 register bits */
+#define CPCAP_BIT_IDPULSE BIT(15)
+#define CPCAP_BIT_ID100KPU BIT(14)
+#define CPCAP_BIT_IDPUCNTRL BIT(13)
+#define CPCAP_BIT_IDPU BIT(12)
+#define CPCAP_BIT_IDPD BIT(11)
+#define CPCAP_BIT_VBUSCHRGTMR3 BIT(10)
+#define CPCAP_BIT_VBUSCHRGTMR2 BIT(9)
+#define CPCAP_BIT_VBUSCHRGTMR1 BIT(8)
+#define CPCAP_BIT_VBUSCHRGTMR0 BIT(7)
+#define CPCAP_BIT_VBUSPU BIT(6)
+#define CPCAP_BIT_VBUSPD BIT(5)
+#define CPCAP_BIT_DMPD BIT(4)
+#define CPCAP_BIT_DPPD BIT(3)
+#define CPCAP_BIT_DM1K5PU BIT(2)
+#define CPCAP_BIT_DP1K5PU BIT(1)
+#define CPCAP_BIT_DP150KPU BIT(0)
+
+/* CPCAP_REG_USBC2 register bits */
+#define CPCAP_BIT_ZHSDRV1 BIT(15)
+#define CPCAP_BIT_ZHSDRV0 BIT(14)
+#define CPCAP_BIT_DPLLCLKREQ BIT(13)
+#define CPCAP_BIT_SE0CONN BIT(12)
+#define CPCAP_BIT_UARTTXTRI BIT(11)
+#define CPCAP_BIT_UARTSWAP BIT(10)
+#define CPCAP_BIT_UARTMUX1 BIT(9)
+#define CPCAP_BIT_UARTMUX0 BIT(8)
+#define CPCAP_BIT_ULPISTPLOW BIT(7)
+#define CPCAP_BIT_TXENPOL BIT(6)
+#define CPCAP_BIT_USBXCVREN BIT(5)
+#define CPCAP_BIT_USBCNTRL BIT(4)
+#define CPCAP_BIT_USBSUSPEND BIT(3)
+#define CPCAP_BIT_EMUMODE2 BIT(2)
+#define CPCAP_BIT_EMUMODE1 BIT(1)
+#define CPCAP_BIT_EMUMODE0 BIT(0)
+
+/* CPCAP_REG_USBC3 register bits */
+#define CPCAP_BIT_SPARE_898_15 BIT(15)
+#define CPCAP_BIT_IHSTX03 BIT(14)
+#define CPCAP_BIT_IHSTX02 BIT(13)
+#define CPCAP_BIT_IHSTX01 BIT(12)
+#define CPCAP_BIT_IHSTX0 BIT(11)
+#define CPCAP_BIT_IDPU_SPI BIT(10)
+#define CPCAP_BIT_UNUSED_898_9 BIT(9)
+#define CPCAP_BIT_VBUSSTBY_EN BIT(8)
+#define CPCAP_BIT_VBUSEN_SPI BIT(7)
+#define CPCAP_BIT_VBUSPU_SPI BIT(6)
+#define CPCAP_BIT_VBUSPD_SPI BIT(5)
+#define CPCAP_BIT_DMPD_SPI BIT(4)
+#define CPCAP_BIT_DPPD_SPI BIT(3)
+#define CPCAP_BIT_SUSPEND_SPI BIT(2)
+#define CPCAP_BIT_PU_SPI BIT(1)
+#define CPCAP_BIT_ULPI_SPI_SEL BIT(0)
+
+struct cpcap_usb_ints_state {
+ bool id_ground;
+ bool id_float;
+ bool chrg_det;
+ bool rvrs_chrg;
+ bool vbusov;
+
+ bool chrg_se1b;
+ bool se0conn;
+ bool rvrs_mode;
+ bool chrgcurr1;
+ bool vbusvld;
+ bool sessvld;
+ bool sessend;
+ bool se1;
+
+ bool battdetb;
+ bool dm;
+ bool dp;
+};
+
+enum cpcap_gpio_mode {
+ CPCAP_DM_DP,
+ CPCAP_MDM_RX_TX,
+ CPCAP_UNKNOWN,
+ CPCAP_OTG_DM_DP,
+};
+
+struct cpcap_phy_ddata {
+ struct regmap *reg;
+ struct device *dev;
+ struct clk *refclk;
+ struct usb_phy phy;
+ struct delayed_work detect_work;
+ struct pinctrl *pins;
+ struct pinctrl_state *pins_ulpi;
+ struct pinctrl_state *pins_utmi;
+ struct pinctrl_state *pins_uart;
+ struct gpio_desc *gpio[2];
+ struct iio_channel *vbus;
+ struct iio_channel *id;
+ struct regulator *vusb;
+ atomic_t active;
+};
+
+static bool cpcap_usb_vbus_valid(struct cpcap_phy_ddata *ddata)
+{
+ int error, value = 0;
+
+ error = iio_read_channel_processed(ddata->vbus, &value);
+ if (error >= 0)
+ return value > 3900 ? true : false;
+
+ dev_err(ddata->dev, "error reading VBUS: %i\n", error);
+
+ return false;
+}
+
+static int cpcap_usb_phy_set_host(struct usb_otg *otg, struct usb_bus *host)
+{
+ otg->host = host;
+ if (!host)
+ otg->state = OTG_STATE_UNDEFINED;
+
+ return 0;
+}
+
+static int cpcap_usb_phy_set_peripheral(struct usb_otg *otg,
+ struct usb_gadget *gadget)
+{
+ otg->gadget = gadget;
+ if (!gadget)
+ otg->state = OTG_STATE_UNDEFINED;
+
+ return 0;
+}
+
+static const struct phy_ops ops = {
+ .owner = THIS_MODULE,
+};
+
+static int cpcap_phy_get_ints_state(struct cpcap_phy_ddata *ddata,
+ struct cpcap_usb_ints_state *s)
+{
+ int val, error;
+
+ error = regmap_read(ddata->reg, CPCAP_REG_INTS1, &val);
+ if (error)
+ return error;
+
+ s->id_ground = val & BIT(15);
+ s->id_float = val & BIT(14);
+ s->vbusov = val & BIT(11);
+
+ error = regmap_read(ddata->reg, CPCAP_REG_INTS2, &val);
+ if (error)
+ return error;
+
+ s->vbusvld = val & BIT(3);
+ s->sessvld = val & BIT(2);
+ s->sessend = val & BIT(1);
+ s->se1 = val & BIT(0);
+
+ error = regmap_read(ddata->reg, CPCAP_REG_INTS4, &val);
+ if (error)
+ return error;
+
+ s->dm = val & BIT(1);
+ s->dp = val & BIT(0);
+
+ return 0;
+}
+
+static int cpcap_usb_set_uart_mode(struct cpcap_phy_ddata *ddata);
+static int cpcap_usb_set_usb_mode(struct cpcap_phy_ddata *ddata);
+
+static void cpcap_usb_detect(struct work_struct *work)
+{
+ struct cpcap_phy_ddata *ddata;
+ struct cpcap_usb_ints_state s;
+ bool vbus = false;
+ int error;
+
+ ddata = container_of(work, struct cpcap_phy_ddata, detect_work.work);
+
+ error = cpcap_phy_get_ints_state(ddata, &s);
+ if (error)
+ return;
+
+ if (s.id_ground) {
+ dev_dbg(ddata->dev, "id ground, USB host mode\n");
+ error = cpcap_usb_set_usb_mode(ddata);
+ if (error)
+ goto out_err;
+
+ error = musb_mailbox(MUSB_ID_GROUND);
+ if (error)
+ goto out_err;
+
+ error = regmap_update_bits(ddata->reg, CPCAP_REG_USBC3,
+ CPCAP_BIT_VBUSSTBY_EN,
+ CPCAP_BIT_VBUSSTBY_EN);
+ if (error)
+ goto out_err;
+
+ return;
+ }
+
+ error = regmap_update_bits(ddata->reg, CPCAP_REG_USBC3,
+ CPCAP_BIT_VBUSSTBY_EN, 0);
+ if (error)
+ goto out_err;
+
+ vbus = cpcap_usb_vbus_valid(ddata);
+
+ if (vbus) {
+ /* Are we connected to a docking station with vbus? */
+ if (s.id_ground) {
+ dev_dbg(ddata->dev, "connected to a dock\n");
+
+ /* No VBUS needed with docks */
+ error = cpcap_usb_set_usb_mode(ddata);
+ if (error)
+ goto out_err;
+ error = musb_mailbox(MUSB_ID_GROUND);
+ if (error)
+ goto out_err;
+
+ return;
+ }
+
+ /* Otherwise assume we're connected to a USB host */
+ dev_dbg(ddata->dev, "connected to USB host\n");
+ error = cpcap_usb_set_usb_mode(ddata);
+ if (error)
+ goto out_err;
+ error = musb_mailbox(MUSB_VBUS_VALID);
+ if (error)
+ goto out_err;
+
+ return;
+ }
+
+ /* Default to debug UART mode */
+ error = cpcap_usb_set_uart_mode(ddata);
+ if (error)
+ goto out_err;
+
+ error = musb_mailbox(MUSB_VBUS_OFF);
+ if (error)
+ goto out_err;
+
+ dev_dbg(ddata->dev, "set UART mode\n");
+
+ return;
+
+out_err:
+ dev_err(ddata->dev, "error setting cable state: %i\n", error);
+}
+
+static irqreturn_t cpcap_phy_irq_thread(int irq, void *data)
+{
+ struct cpcap_phy_ddata *ddata = data;
+
+ if (!atomic_read(&ddata->active))
+ return IRQ_NONE;
+
+ schedule_delayed_work(&ddata->detect_work, msecs_to_jiffies(1));
+
+ return IRQ_HANDLED;
+}
+
+static int cpcap_usb_init_irq(struct platform_device *pdev,
+ struct cpcap_phy_ddata *ddata,
+ const char *name)
+{
+ int irq, error;
+
+ irq = platform_get_irq_byname(pdev, name);
+ if (!irq)
+ return -ENODEV;
+
+ error = devm_request_threaded_irq(ddata->dev, irq, NULL,
+ cpcap_phy_irq_thread,
+ IRQF_SHARED,
+ name, ddata);
+ if (error) {
+ dev_err(ddata->dev, "could not get irq %s: %i\n",
+ name, error);
+
+ return error;
+ }
+
+ return 0;
+}
+
+static const char * const cpcap_phy_irqs[] = {
+ /* REG_INT_0 */
+ "id_ground", "id_float",
+
+ /* REG_INT1 */
+ "se0conn", "vbusvld", "sessvld", "sessend", "se1",
+
+ /* REG_INT_3 */
+ "dm", "dp",
+};
+
+static int cpcap_usb_init_interrupts(struct platform_device *pdev,
+ struct cpcap_phy_ddata *ddata)
+{
+ int i, error;
+
+ for (i = 0; i < ARRAY_SIZE(cpcap_phy_irqs); i++) {
+ error = cpcap_usb_init_irq(pdev, ddata, cpcap_phy_irqs[i]);
+ if (error)
+ return error;
+ }
+
+ return 0;
+}
+
+/*
+ * Optional pins and modes. At least Motorola mapphone devices
+ * are using two GPIOs and dynamic pinctrl to multiplex PHY pins
+ * to UART, ULPI or UTMI mode.
+ */
+
+static int cpcap_usb_gpio_set_mode(struct cpcap_phy_ddata *ddata,
+ enum cpcap_gpio_mode mode)
+{
+ if (!ddata->gpio[0] || !ddata->gpio[1])
+ return 0;
+
+ gpiod_set_value(ddata->gpio[0], mode & 1);
+ gpiod_set_value(ddata->gpio[1], mode >> 1);
+
+ return 0;
+}
+
+static int cpcap_usb_set_uart_mode(struct cpcap_phy_ddata *ddata)
+{
+ int error;
+
+ error = cpcap_usb_gpio_set_mode(ddata, CPCAP_DM_DP);
+ if (error)
+ goto out_err;
+
+ if (ddata->pins_uart) {
+ error = pinctrl_select_state(ddata->pins, ddata->pins_uart);
+ if (error)
+ goto out_err;
+ }
+
+ error = regmap_update_bits(ddata->reg, CPCAP_REG_USBC1,
+ CPCAP_BIT_VBUSPD,
+ CPCAP_BIT_VBUSPD);
+ if (error)
+ goto out_err;
+
+ error = regmap_update_bits(ddata->reg, CPCAP_REG_USBC2,
+ 0xffff, CPCAP_BIT_UARTMUX0 |
+ CPCAP_BIT_EMUMODE0);
+ if (error)
+ goto out_err;
+
+ error = regmap_update_bits(ddata->reg, CPCAP_REG_USBC3, 0x7fff,
+ CPCAP_BIT_IDPU_SPI);
+ if (error)
+ goto out_err;
+
+ return 0;
+
+out_err:
+ dev_err(ddata->dev, "%s failed with %i\n", __func__, error);
+
+ return error;
+}
+
+static int cpcap_usb_set_usb_mode(struct cpcap_phy_ddata *ddata)
+{
+ int error;
+
+ error = cpcap_usb_gpio_set_mode(ddata, CPCAP_OTG_DM_DP);
+ if (error)
+ return error;
+
+ if (ddata->pins_utmi) {
+ error = pinctrl_select_state(ddata->pins, ddata->pins_utmi);
+ if (error) {
+ dev_err(ddata->dev, "could not set usb mode: %i\n",
+ error);
+
+ return error;
+ }
+ }
+
+ error = regmap_update_bits(ddata->reg, CPCAP_REG_USBC1,
+ CPCAP_BIT_VBUSPD, 0);
+ if (error)
+ goto out_err;
+
+ error = regmap_update_bits(ddata->reg, CPCAP_REG_USBC2,
+ CPCAP_BIT_USBXCVREN,
+ CPCAP_BIT_USBXCVREN);
+ if (error)
+ goto out_err;
+
+ error = regmap_update_bits(ddata->reg, CPCAP_REG_USBC3,
+ CPCAP_BIT_PU_SPI |
+ CPCAP_BIT_DMPD_SPI |
+ CPCAP_BIT_DPPD_SPI |
+ CPCAP_BIT_SUSPEND_SPI |
+ CPCAP_BIT_ULPI_SPI_SEL, 0);
+ if (error)
+ goto out_err;
+
+ error = regmap_update_bits(ddata->reg, CPCAP_REG_USBC2,
+ CPCAP_BIT_USBXCVREN,
+ CPCAP_BIT_USBXCVREN);
+ if (error)
+ goto out_err;
+
+ return 0;
+
+out_err:
+ dev_err(ddata->dev, "%s failed with %i\n", __func__, error);
+
+ return error;
+}
+
+static int cpcap_usb_init_optional_pins(struct cpcap_phy_ddata *ddata)
+{
+ ddata->pins = devm_pinctrl_get(ddata->dev);
+ if (IS_ERR(ddata->pins)) {
+ dev_info(ddata->dev, "default pins not configured: %ld\n",
+ PTR_ERR(ddata->pins));
+ ddata->pins = NULL;
+
+ return 0;
+ }
+
+ ddata->pins_ulpi = pinctrl_lookup_state(ddata->pins, "ulpi");
+ if (IS_ERR(ddata->pins_ulpi)) {
+ dev_info(ddata->dev, "ulpi pins not configured\n");
+ ddata->pins_ulpi = NULL;
+ }
+
+ ddata->pins_utmi = pinctrl_lookup_state(ddata->pins, "utmi");
+ if (IS_ERR(ddata->pins_utmi)) {
+ dev_info(ddata->dev, "utmi pins not configured\n");
+ ddata->pins_utmi = NULL;
+ }
+
+ ddata->pins_uart = pinctrl_lookup_state(ddata->pins, "uart");
+ if (IS_ERR(ddata->pins_uart)) {
+ dev_info(ddata->dev, "uart pins not configured\n");
+ ddata->pins_uart = NULL;
+ }
+
+ if (ddata->pins_uart)
+ return pinctrl_select_state(ddata->pins, ddata->pins_uart);
+
+ return 0;
+}
+
+static void cpcap_usb_init_optional_gpios(struct cpcap_phy_ddata *ddata)
+{
+ int i;
+
+ for (i = 0; i < 2; i++) {
+ ddata->gpio[i] = devm_gpiod_get_index(ddata->dev, "mode",
+ i, GPIOD_OUT_HIGH);
+ if (IS_ERR(ddata->gpio[i])) {
+ dev_info(ddata->dev, "no mode change GPIO%i: %li\n",
+ i, PTR_ERR(ddata->gpio[i]));
+ ddata->gpio[i] = NULL;
+ }
+ }
+}
+
+static int cpcap_usb_init_iio(struct cpcap_phy_ddata *ddata)
+{
+ enum iio_chan_type type;
+ int error;
+
+ ddata->vbus = devm_iio_channel_get(ddata->dev, "vbus");
+ if (IS_ERR(ddata->vbus)) {
+ error = PTR_ERR(ddata->vbus);
+ goto out_err;
+ }
+
+ if (!ddata->vbus->indio_dev) {
+ error = -ENXIO;
+ goto out_err;
+ }
+
+ error = iio_get_channel_type(ddata->vbus, &type);
+ if (error < 0)
+ goto out_err;
+
+ if (type != IIO_VOLTAGE) {
+ error = -EINVAL;
+ goto out_err;
+ }
+
+ return 0;
+
+out_err:
+ dev_err(ddata->dev, "could not initialize VBUS or ID IIO: %i\n",
+ error);
+
+ return error;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id cpcap_usb_phy_id_table[] = {
+ {
+ .compatible = "motorola,cpcap-usb-phy",
+ },
+ {
+ .compatible = "motorola,mapphone-cpcap-usb-phy",
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(of, cpcap_usb_phy_id_table);
+#endif
+
+static int cpcap_usb_phy_probe(struct platform_device *pdev)
+{
+ struct cpcap_phy_ddata *ddata;
+ struct phy *generic_phy;
+ struct phy_provider *phy_provider;
+ struct usb_otg *otg;
+ const struct of_device_id *of_id;
+ int error;
+
+ of_id = of_match_device(of_match_ptr(cpcap_usb_phy_id_table),
+ &pdev->dev);
+ if (!of_id)
+ return -EINVAL;
+
+ ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
+ if (!ddata)
+ return -ENOMEM;
+
+ ddata->reg = dev_get_regmap(pdev->dev.parent, NULL);
+ if (!ddata->reg)
+ return -ENODEV;
+
+ otg = devm_kzalloc(&pdev->dev, sizeof(*otg), GFP_KERNEL);
+ if (!otg)
+ return -ENOMEM;
+
+ ddata->dev = &pdev->dev;
+ ddata->phy.dev = ddata->dev;
+ ddata->phy.label = "cpcap_usb_phy";
+ ddata->phy.otg = otg;
+ ddata->phy.type = USB_PHY_TYPE_USB2;
+ otg->set_host = cpcap_usb_phy_set_host;
+ otg->set_peripheral = cpcap_usb_phy_set_peripheral;
+ otg->usb_phy = &ddata->phy;
+ INIT_DELAYED_WORK(&ddata->detect_work, cpcap_usb_detect);
+ platform_set_drvdata(pdev, ddata);
+
+ ddata->vusb = devm_regulator_get(&pdev->dev, "vusb");
+ if (IS_ERR(ddata->vusb))
+ return PTR_ERR(ddata->vusb);
+
+ error = regulator_enable(ddata->vusb);
+ if (error)
+ return error;
+
+ generic_phy = devm_phy_create(ddata->dev, NULL, &ops);
+ if (IS_ERR(generic_phy)) {
+ error = PTR_ERR(generic_phy);
+ return PTR_ERR(generic_phy);
+ }
+
+ phy_set_drvdata(generic_phy, ddata);
+
+ phy_provider = devm_of_phy_provider_register(ddata->dev,
+ of_phy_simple_xlate);
+ if (IS_ERR(phy_provider))
+ return PTR_ERR(phy_provider);
+
+ error = cpcap_usb_init_optional_pins(ddata);
+ if (error)
+ return error;
+
+ cpcap_usb_init_optional_gpios(ddata);
+
+ error = cpcap_usb_init_iio(ddata);
+ if (error)
+ return error;
+
+ error = cpcap_usb_init_interrupts(pdev, ddata);
+ if (error)
+ return error;
+
+ usb_add_phy_dev(&ddata->phy);
+ atomic_set(&ddata->active, 1);
+ schedule_delayed_work(&ddata->detect_work, msecs_to_jiffies(1));
+
+ return 0;
+}
+
+static int cpcap_usb_phy_remove(struct platform_device *pdev)
+{
+ struct cpcap_phy_ddata *ddata = platform_get_drvdata(pdev);
+ int error;
+
+ atomic_set(&ddata->active, 0);
+ error = cpcap_usb_set_uart_mode(ddata);
+ if (error)
+ dev_err(ddata->dev, "could not set UART mode\n");
+
+ error = musb_mailbox(MUSB_VBUS_OFF);
+ if (error)
+ dev_err(ddata->dev, "could not set mailbox\n");
+
+ usb_remove_phy(&ddata->phy);
+ cancel_delayed_work_sync(&ddata->detect_work);
+ clk_unprepare(ddata->refclk);
+ regulator_disable(ddata->vusb);
+
+ return 0;
+}
+
+static struct platform_driver cpcap_usb_phy_driver = {
+ .probe = cpcap_usb_phy_probe,
+ .remove = cpcap_usb_phy_remove,
+ .driver = {
+ .name = "cpcap-usb-phy",
+ .of_match_table = of_match_ptr(cpcap_usb_phy_id_table),
+ },
+};
+
+module_platform_driver(cpcap_usb_phy_driver);
+
+MODULE_ALIAS("platform:cpcap_usb");
+MODULE_AUTHOR("Tony Lindgren <tony@atomide.com>");
+MODULE_DESCRIPTION("CPCAP usb phy driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/qualcomm/Kconfig b/drivers/phy/qualcomm/Kconfig
new file mode 100644
index 0000000..7bfa64b
--- /dev/null
+++ b/drivers/phy/qualcomm/Kconfig
@@ -0,0 +1,58 @@
+#
+# Phy drivers for Qualcomm platforms
+#
+config PHY_QCOM_APQ8064_SATA
+ tristate "Qualcomm APQ8064 SATA SerDes/PHY driver"
+ depends on ARCH_QCOM
+ depends on HAS_IOMEM
+ depends on OF
+ select GENERIC_PHY
+
+config PHY_QCOM_IPQ806X_SATA
+ tristate "Qualcomm IPQ806x SATA SerDes/PHY driver"
+ depends on ARCH_QCOM
+ depends on HAS_IOMEM
+ depends on OF
+ select GENERIC_PHY
+
+config PHY_QCOM_QMP
+ tristate "Qualcomm QMP PHY Driver"
+ depends on OF && COMMON_CLK && (ARCH_QCOM || COMPILE_TEST)
+ select GENERIC_PHY
+ help
+ Enable this to support the QMP PHY transceiver that is used
+ with controllers such as PCIe, UFS, and USB on Qualcomm chips.
+
+config PHY_QCOM_QUSB2
+ tristate "Qualcomm QUSB2 PHY Driver"
+ depends on OF && (ARCH_QCOM || COMPILE_TEST)
+ depends on NVMEM || !NVMEM
+ select GENERIC_PHY
+ help
+ Enable this to support the HighSpeed QUSB2 PHY transceiver for USB
+ controllers on Qualcomm chips. This driver supports the high-speed
+ PHY which is usually paired with either the ChipIdea or Synopsys DWC3
+ USB IPs on MSM SOCs.
+
+config PHY_QCOM_UFS
+ tristate "Qualcomm UFS PHY driver"
+ depends on OF && ARCH_QCOM
+ select GENERIC_PHY
+ help
+ Support for UFS PHY on QCOM chipsets.
+
+config PHY_QCOM_USB_HS
+ tristate "Qualcomm USB HS PHY module"
+ depends on USB_ULPI_BUS
+ depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in
+ select GENERIC_PHY
+ help
+ Support for the USB high-speed ULPI compliant phy on Qualcomm
+ chipsets.
+
+config PHY_QCOM_USB_HSIC
+ tristate "Qualcomm USB HSIC ULPI PHY module"
+ depends on USB_ULPI_BUS
+ select GENERIC_PHY
+ help
+ Support for the USB HSIC ULPI compliant PHY on QCOM chipsets.
diff --git a/drivers/phy/qualcomm/Makefile b/drivers/phy/qualcomm/Makefile
new file mode 100644
index 0000000..2e183d7
--- /dev/null
+++ b/drivers/phy/qualcomm/Makefile
@@ -0,0 +1,9 @@
+obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o
+obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o
+obj-$(CONFIG_PHY_QCOM_QMP) += phy-qcom-qmp.o
+obj-$(CONFIG_PHY_QCOM_QUSB2) += phy-qcom-qusb2.o
+obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs.o
+obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-14nm.o
+obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-20nm.o
+obj-$(CONFIG_PHY_QCOM_USB_HS) += phy-qcom-usb-hs.o
+obj-$(CONFIG_PHY_QCOM_USB_HSIC) += phy-qcom-usb-hsic.o
diff --git a/drivers/phy/phy-qcom-apq8064-sata.c b/drivers/phy/qualcomm/phy-qcom-apq8064-sata.c
similarity index 100%
rename from drivers/phy/phy-qcom-apq8064-sata.c
rename to drivers/phy/qualcomm/phy-qcom-apq8064-sata.c
diff --git a/drivers/phy/phy-qcom-ipq806x-sata.c b/drivers/phy/qualcomm/phy-qcom-ipq806x-sata.c
similarity index 100%
rename from drivers/phy/phy-qcom-ipq806x-sata.c
rename to drivers/phy/qualcomm/phy-qcom-ipq806x-sata.c
diff --git a/drivers/phy/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
similarity index 100%
rename from drivers/phy/phy-qcom-qmp.c
rename to drivers/phy/qualcomm/phy-qcom-qmp.c
diff --git a/drivers/phy/phy-qcom-qusb2.c b/drivers/phy/qualcomm/phy-qcom-qusb2.c
similarity index 100%
rename from drivers/phy/phy-qcom-qusb2.c
rename to drivers/phy/qualcomm/phy-qcom-qusb2.c
diff --git a/drivers/phy/phy-qcom-ufs-i.h b/drivers/phy/qualcomm/phy-qcom-ufs-i.h
similarity index 100%
rename from drivers/phy/phy-qcom-ufs-i.h
rename to drivers/phy/qualcomm/phy-qcom-ufs-i.h
diff --git a/drivers/phy/phy-qcom-ufs-qmp-14nm.c b/drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.c
similarity index 100%
rename from drivers/phy/phy-qcom-ufs-qmp-14nm.c
rename to drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.c
diff --git a/drivers/phy/phy-qcom-ufs-qmp-14nm.h b/drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.h
similarity index 100%
rename from drivers/phy/phy-qcom-ufs-qmp-14nm.h
rename to drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.h
diff --git a/drivers/phy/phy-qcom-ufs-qmp-20nm.c b/drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.c
similarity index 100%
rename from drivers/phy/phy-qcom-ufs-qmp-20nm.c
rename to drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.c
diff --git a/drivers/phy/phy-qcom-ufs-qmp-20nm.h b/drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.h
similarity index 100%
rename from drivers/phy/phy-qcom-ufs-qmp-20nm.h
rename to drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.h
diff --git a/drivers/phy/phy-qcom-ufs.c b/drivers/phy/qualcomm/phy-qcom-ufs.c
similarity index 100%
rename from drivers/phy/phy-qcom-ufs.c
rename to drivers/phy/qualcomm/phy-qcom-ufs.c
diff --git a/drivers/phy/phy-qcom-usb-hs.c b/drivers/phy/qualcomm/phy-qcom-usb-hs.c
similarity index 99%
rename from drivers/phy/phy-qcom-usb-hs.c
rename to drivers/phy/qualcomm/phy-qcom-usb-hs.c
index 94dfbfd..4b20abc 100644
--- a/drivers/phy/phy-qcom-usb-hs.c
+++ b/drivers/phy/qualcomm/phy-qcom-usb-hs.c
@@ -11,12 +11,11 @@
#include <linux/clk.h>
#include <linux/regulator/consumer.h>
#include <linux/of_device.h>
+#include <linux/phy/phy.h>
#include <linux/reset.h>
#include <linux/extcon.h>
#include <linux/notifier.h>
-#include "ulpi_phy.h"
-
#define ULPI_PWR_CLK_MNG_REG 0x88
# define ULPI_PWR_OTG_COMP_DISABLE BIT(0)
diff --git a/drivers/phy/phy-qcom-usb-hsic.c b/drivers/phy/qualcomm/phy-qcom-usb-hsic.c
similarity index 98%
rename from drivers/phy/phy-qcom-usb-hsic.c
rename to drivers/phy/qualcomm/phy-qcom-usb-hsic.c
index 47690f9..c110563 100644
--- a/drivers/phy/phy-qcom-usb-hsic.c
+++ b/drivers/phy/qualcomm/phy-qcom-usb-hsic.c
@@ -8,13 +8,12 @@
#include <linux/module.h>
#include <linux/ulpi/driver.h>
#include <linux/ulpi/regs.h>
+#include <linux/phy/phy.h>
#include <linux/pinctrl/consumer.h>
#include <linux/pinctrl/pinctrl-state.h>
#include <linux/delay.h>
#include <linux/clk.h>
-#include "ulpi_phy.h"
-
#define ULPI_HSIC_CFG 0x30
#define ULPI_HSIC_IO_CAL 0x33
diff --git a/drivers/phy/renesas/Kconfig b/drivers/phy/renesas/Kconfig
new file mode 100644
index 0000000..cb09245
--- /dev/null
+++ b/drivers/phy/renesas/Kconfig
@@ -0,0 +1,24 @@
+#
+# Phy drivers for Renesas platforms
+#
+config PHY_RCAR_GEN2
+ tristate "Renesas R-Car generation 2 USB PHY driver"
+ depends on ARCH_RENESAS
+ depends on GENERIC_PHY
+ help
+ Support for USB PHY found on Renesas R-Car generation 2 SoCs.
+
+config PHY_RCAR_GEN3_USB2
+ tristate "Renesas R-Car generation 3 USB 2.0 PHY driver"
+ depends on ARCH_RENESAS
+ depends on EXTCON
+ select GENERIC_PHY
+ help
+ Support for USB 2.0 PHY found on Renesas R-Car generation 3 SoCs.
+
+config PHY_RCAR_GEN3_USB3
+ tristate "Renesas R-Car generation 3 USB 3.0 PHY driver"
+ depends on ARCH_RENESAS || COMPILE_TEST
+ select GENERIC_PHY
+ help
+ Support for USB 3.0 PHY found on Renesas R-Car generation 3 SoCs.
diff --git a/drivers/phy/renesas/Makefile b/drivers/phy/renesas/Makefile
new file mode 100644
index 0000000..8b60259
--- /dev/null
+++ b/drivers/phy/renesas/Makefile
@@ -0,0 +1,3 @@
+obj-$(CONFIG_PHY_RCAR_GEN2) += phy-rcar-gen2.o
+obj-$(CONFIG_PHY_RCAR_GEN3_USB2) += phy-rcar-gen3-usb2.o
+obj-$(CONFIG_PHY_RCAR_GEN3_USB3) += phy-rcar-gen3-usb3.o
diff --git a/drivers/phy/phy-rcar-gen2.c b/drivers/phy/renesas/phy-rcar-gen2.c
similarity index 100%
rename from drivers/phy/phy-rcar-gen2.c
rename to drivers/phy/renesas/phy-rcar-gen2.c
diff --git a/drivers/phy/phy-rcar-gen3-usb2.c b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
similarity index 100%
rename from drivers/phy/phy-rcar-gen3-usb2.c
rename to drivers/phy/renesas/phy-rcar-gen3-usb2.c
diff --git a/drivers/phy/renesas/phy-rcar-gen3-usb3.c b/drivers/phy/renesas/phy-rcar-gen3-usb3.c
new file mode 100644
index 0000000..88c83c9
--- /dev/null
+++ b/drivers/phy/renesas/phy-rcar-gen3-usb3.c
@@ -0,0 +1,226 @@
+/*
+ * Renesas R-Car Gen3 for USB3.0 PHY driver
+ *
+ * Copyright (C) 2017 Renesas Electronics Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+
+#define USB30_CLKSET0 0x034
+#define USB30_CLKSET1 0x036
+#define USB30_SSC_SET 0x038
+#define USB30_PHY_ENABLE 0x060
+#define USB30_VBUS_EN 0x064
+
+/* USB30_CLKSET0 */
+#define CLKSET0_PRIVATE 0x05c0
+#define CLKSET0_USB30_FSEL_USB_EXTAL 0x0002
+
+/* USB30_CLKSET1 */
+#define CLKSET1_USB30_PLL_MULTI_SHIFT 6
+#define CLKSET1_USB30_PLL_MULTI_USB_EXTAL (0x64 << \
+ CLKSET1_USB30_PLL_MULTI_SHIFT)
+#define CLKSET1_PHYRESET BIT(4) /* 1: reset */
+#define CLKSET1_REF_CLKDIV BIT(3) /* 1: USB_EXTAL */
+#define CLKSET1_PRIVATE_2_1 BIT(1) /* Write B'01 */
+#define CLKSET1_REF_CLK_SEL BIT(0) /* 1: USB3S0_CLK_P */
+
+/* USB30_SSC_SET */
+#define SSC_SET_SSC_EN BIT(12)
+#define SSC_SET_RANGE_SHIFT 9
+#define SSC_SET_RANGE_4980 (0x0 << SSC_SET_RANGE_SHIFT)
+#define SSC_SET_RANGE_4492 (0x1 << SSC_SET_RANGE_SHIFT)
+#define SSC_SET_RANGE_4003 (0x2 << SSC_SET_RANGE_SHIFT)
+
+/* USB30_PHY_ENABLE */
+#define PHY_ENABLE_RESET_EN BIT(4)
+
+/* USB30_VBUS_EN */
+#define VBUS_EN_VBUS_EN BIT(1)
+
+struct rcar_gen3_usb3 {
+ void __iomem *base;
+ struct phy *phy;
+ u32 ssc_range;
+ bool usb3s_clk;
+ bool usb_extal;
+};
+
+static void write_clkset1_for_usb_extal(struct rcar_gen3_usb3 *r, bool reset)
+{
+ u16 val = CLKSET1_USB30_PLL_MULTI_USB_EXTAL |
+ CLKSET1_REF_CLKDIV | CLKSET1_PRIVATE_2_1;
+
+ if (reset)
+ val |= CLKSET1_PHYRESET;
+
+ writew(val, r->base + USB30_CLKSET1);
+}
+
+static void rcar_gen3_phy_usb3_enable_ssc(struct rcar_gen3_usb3 *r)
+{
+ u16 val = SSC_SET_SSC_EN;
+
+ switch (r->ssc_range) {
+ case 4980:
+ val |= SSC_SET_RANGE_4980;
+ break;
+ case 4492:
+ val |= SSC_SET_RANGE_4492;
+ break;
+ case 4003:
+ val |= SSC_SET_RANGE_4003;
+ break;
+ default:
+ dev_err(&r->phy->dev, "%s: unsupported range (%x)\n", __func__,
+ r->ssc_range);
+ return;
+ }
+
+ writew(val, r->base + USB30_SSC_SET);
+}
+
+static void rcar_gen3_phy_usb3_select_usb_extal(struct rcar_gen3_usb3 *r)
+{
+ write_clkset1_for_usb_extal(r, false);
+ if (r->ssc_range)
+ rcar_gen3_phy_usb3_enable_ssc(r);
+ writew(CLKSET0_PRIVATE | CLKSET0_USB30_FSEL_USB_EXTAL,
+ r->base + USB30_CLKSET0);
+ writew(PHY_ENABLE_RESET_EN, r->base + USB30_PHY_ENABLE);
+ write_clkset1_for_usb_extal(r, true);
+ usleep_range(10, 20);
+ write_clkset1_for_usb_extal(r, false);
+}
+
+static int rcar_gen3_phy_usb3_init(struct phy *p)
+{
+ struct rcar_gen3_usb3 *r = phy_get_drvdata(p);
+
+ dev_vdbg(&r->phy->dev, "%s: enter (%d, %d, %d)\n", __func__,
+ r->usb3s_clk, r->usb_extal, r->ssc_range);
+
+ if (!r->usb3s_clk && r->usb_extal)
+ rcar_gen3_phy_usb3_select_usb_extal(r);
+
+ /* Enables VBUS detection anyway */
+ writew(VBUS_EN_VBUS_EN, r->base + USB30_VBUS_EN);
+
+ return 0;
+}
+
+static const struct phy_ops rcar_gen3_phy_usb3_ops = {
+ .init = rcar_gen3_phy_usb3_init,
+ .owner = THIS_MODULE,
+};
+
+static const struct of_device_id rcar_gen3_phy_usb3_match_table[] = {
+ { .compatible = "renesas,rcar-gen3-usb3-phy" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, rcar_gen3_phy_usb3_match_table);
+
+static int rcar_gen3_phy_usb3_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct rcar_gen3_usb3 *r;
+ struct phy_provider *provider;
+ struct resource *res;
+ int ret = 0;
+ struct clk *clk;
+
+ if (!dev->of_node) {
+ dev_err(dev, "This driver needs device tree\n");
+ return -EINVAL;
+ }
+
+ r = devm_kzalloc(dev, sizeof(*r), GFP_KERNEL);
+ if (!r)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ r->base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(r->base))
+ return PTR_ERR(r->base);
+
+ clk = devm_clk_get(dev, "usb3s_clk");
+ if (!IS_ERR(clk) && !clk_prepare_enable(clk)) {
+ r->usb3s_clk = !!clk_get_rate(clk);
+ clk_disable_unprepare(clk);
+ }
+ clk = devm_clk_get(dev, "usb_extal");
+ if (!IS_ERR(clk) && !clk_prepare_enable(clk)) {
+ r->usb_extal = !!clk_get_rate(clk);
+ clk_disable_unprepare(clk);
+ }
+
+ if (!r->usb3s_clk && !r->usb_extal) {
+ dev_err(dev, "This driver needs usb3s_clk and/or usb_extal\n");
+ ret = -EINVAL;
+ goto error;
+ }
+
+ /*
+ * devm_phy_create() will call pm_runtime_enable(&phy->dev);
+ * And then, phy-core will manage runtime pm for this device.
+ */
+ pm_runtime_enable(dev);
+
+ r->phy = devm_phy_create(dev, NULL, &rcar_gen3_phy_usb3_ops);
+ if (IS_ERR(r->phy)) {
+ dev_err(dev, "Failed to create USB3 PHY\n");
+ ret = PTR_ERR(r->phy);
+ goto error;
+ }
+
+ of_property_read_u32(dev->of_node, "renesas,ssc-range", &r->ssc_range);
+
+ platform_set_drvdata(pdev, r);
+ phy_set_drvdata(r->phy, r);
+
+ provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+ if (IS_ERR(provider)) {
+ dev_err(dev, "Failed to register PHY provider\n");
+ ret = PTR_ERR(provider);
+ goto error;
+ }
+
+ return 0;
+
+error:
+ pm_runtime_disable(dev);
+
+ return ret;
+}
+
+static int rcar_gen3_phy_usb3_remove(struct platform_device *pdev)
+{
+ pm_runtime_disable(&pdev->dev);
+
+ return 0;
+};
+
+static struct platform_driver rcar_gen3_phy_usb3_driver = {
+ .driver = {
+ .name = "phy_rcar_gen3_usb3",
+ .of_match_table = rcar_gen3_phy_usb3_match_table,
+ },
+ .probe = rcar_gen3_phy_usb3_probe,
+ .remove = rcar_gen3_phy_usb3_remove,
+};
+module_platform_driver(rcar_gen3_phy_usb3_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Renesas R-Car Gen3 USB 3.0 PHY");
+MODULE_AUTHOR("Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>");
diff --git a/drivers/phy/rockchip/Kconfig b/drivers/phy/rockchip/Kconfig
new file mode 100644
index 0000000..f5325b2
--- /dev/null
+++ b/drivers/phy/rockchip/Kconfig
@@ -0,0 +1,51 @@
+#
+# Phy drivers for Rockchip platforms
+#
+config PHY_ROCKCHIP_DP
+ tristate "Rockchip Display Port PHY Driver"
+ depends on ARCH_ROCKCHIP && OF
+ select GENERIC_PHY
+ help
+ Enable this to support the Rockchip Display Port PHY.
+
+config PHY_ROCKCHIP_EMMC
+ tristate "Rockchip EMMC PHY Driver"
+ depends on ARCH_ROCKCHIP && OF
+ select GENERIC_PHY
+ help
+ Enable this to support the Rockchip EMMC PHY.
+
+config PHY_ROCKCHIP_INNO_USB2
+ tristate "Rockchip INNO USB2PHY Driver"
+ depends on (ARCH_ROCKCHIP || COMPILE_TEST) && OF
+ depends on COMMON_CLK
+ depends on EXTCON
+ depends on USB_SUPPORT
+ select GENERIC_PHY
+ select USB_COMMON
+ help
+ Support for Rockchip USB2.0 PHY with Innosilicon IP block.
+
+config PHY_ROCKCHIP_PCIE
+ tristate "Rockchip PCIe PHY Driver"
+ depends on (ARCH_ROCKCHIP && OF) || COMPILE_TEST
+ select GENERIC_PHY
+ select MFD_SYSCON
+ help
+ Enable this to support the Rockchip PCIe PHY.
+
+config PHY_ROCKCHIP_TYPEC
+ tristate "Rockchip TYPEC PHY Driver"
+ depends on OF && (ARCH_ROCKCHIP || COMPILE_TEST)
+ select EXTCON
+ select GENERIC_PHY
+ select RESET_CONTROLLER
+ help
+ Enable this to support the Rockchip USB TYPEC PHY.
+
+config PHY_ROCKCHIP_USB
+ tristate "Rockchip USB2 PHY Driver"
+ depends on ARCH_ROCKCHIP && OF
+ select GENERIC_PHY
+ help
+ Enable this to support the Rockchip USB 2.0 PHY.
diff --git a/drivers/phy/rockchip/Makefile b/drivers/phy/rockchip/Makefile
new file mode 100644
index 0000000..bd0acdf
--- /dev/null
+++ b/drivers/phy/rockchip/Makefile
@@ -0,0 +1,6 @@
+obj-$(CONFIG_PHY_ROCKCHIP_DP) += phy-rockchip-dp.o
+obj-$(CONFIG_PHY_ROCKCHIP_EMMC) += phy-rockchip-emmc.o
+obj-$(CONFIG_PHY_ROCKCHIP_INNO_USB2) += phy-rockchip-inno-usb2.o
+obj-$(CONFIG_PHY_ROCKCHIP_PCIE) += phy-rockchip-pcie.o
+obj-$(CONFIG_PHY_ROCKCHIP_TYPEC) += phy-rockchip-typec.o
+obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o
diff --git a/drivers/phy/phy-rockchip-dp.c b/drivers/phy/rockchip/phy-rockchip-dp.c
similarity index 100%
rename from drivers/phy/phy-rockchip-dp.c
rename to drivers/phy/rockchip/phy-rockchip-dp.c
diff --git a/drivers/phy/phy-rockchip-emmc.c b/drivers/phy/rockchip/phy-rockchip-emmc.c
similarity index 100%
rename from drivers/phy/phy-rockchip-emmc.c
rename to drivers/phy/rockchip/phy-rockchip-emmc.c
diff --git a/drivers/phy/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
similarity index 94%
rename from drivers/phy/phy-rockchip-inno-usb2.c
rename to drivers/phy/rockchip/phy-rockchip-inno-usb2.c
index 8efe78a..626883d 100644
--- a/drivers/phy/phy-rockchip-inno-usb2.c
+++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
@@ -406,7 +406,8 @@ static int rockchip_usb2phy_init(struct phy *phy)
mutex_lock(&rport->mutex);
if (rport->port_id == USB2PHY_PORT_OTG) {
- if (rport->mode != USB_DR_MODE_HOST) {
+ if (rport->mode != USB_DR_MODE_HOST &&
+ rport->mode != USB_DR_MODE_UNKNOWN) {
/* clear bvalid status and enable bvalid detect irq */
ret = property_enable(rphy,
&rport->port_cfg->bvalid_det_clr,
@@ -421,7 +422,7 @@ static int rockchip_usb2phy_init(struct phy *phy)
goto out;
schedule_delayed_work(&rport->otg_sm_work,
- OTG_SCHEDULE_DELAY);
+ OTG_SCHEDULE_DELAY * 3);
} else {
/* If OTG works in host only mode, do nothing. */
dev_dbg(&rport->phy->dev, "mode %d\n", rport->mode);
@@ -463,6 +464,9 @@ static int rockchip_usb2phy_power_on(struct phy *phy)
if (ret)
return ret;
+ /* waiting for the utmi_clk to become stable */
+ usleep_range(1500, 2000);
+
rport->suspended = false;
return 0;
}
@@ -493,7 +497,8 @@ static int rockchip_usb2phy_exit(struct phy *phy)
struct rockchip_usb2phy_port *rport = phy_get_drvdata(phy);
if (rport->port_id == USB2PHY_PORT_OTG &&
- rport->mode != USB_DR_MODE_HOST) {
+ rport->mode != USB_DR_MODE_HOST &&
+ rport->mode != USB_DR_MODE_UNKNOWN) {
cancel_delayed_work_sync(&rport->otg_sm_work);
cancel_delayed_work_sync(&rport->chg_work);
} else if (rport->port_id == USB2PHY_PORT_HOST)
@@ -970,7 +975,8 @@ static int rockchip_usb2phy_otg_port_init(struct rockchip_usb2phy *rphy,
mutex_init(&rport->mutex);
rport->mode = of_usb_get_dr_mode_by_phy(child_np, -1);
- if (rport->mode == USB_DR_MODE_HOST) {
+ if (rport->mode == USB_DR_MODE_HOST ||
+ rport->mode == USB_DR_MODE_UNKNOWN) {
ret = 0;
goto out;
}
@@ -1138,6 +1144,65 @@ static int rockchip_usb2phy_probe(struct platform_device *pdev)
return ret;
}
+static const struct rockchip_usb2phy_cfg rk3228_phy_cfgs[] = {
+ {
+ .reg = 0x760,
+ .num_ports = 2,
+ .clkout_ctl = { 0x0768, 4, 4, 1, 0 },
+ .port_cfgs = {
+ [USB2PHY_PORT_OTG] = {
+ .phy_sus = { 0x0760, 15, 0, 0, 0x1d1 },
+ .bvalid_det_en = { 0x0680, 3, 3, 0, 1 },
+ .bvalid_det_st = { 0x0690, 3, 3, 0, 1 },
+ .bvalid_det_clr = { 0x06a0, 3, 3, 0, 1 },
+ .ls_det_en = { 0x0680, 2, 2, 0, 1 },
+ .ls_det_st = { 0x0690, 2, 2, 0, 1 },
+ .ls_det_clr = { 0x06a0, 2, 2, 0, 1 },
+ .utmi_bvalid = { 0x0480, 4, 4, 0, 1 },
+ .utmi_ls = { 0x0480, 3, 2, 0, 1 },
+ },
+ [USB2PHY_PORT_HOST] = {
+ .phy_sus = { 0x0764, 15, 0, 0, 0x1d1 },
+ .ls_det_en = { 0x0680, 4, 4, 0, 1 },
+ .ls_det_st = { 0x0690, 4, 4, 0, 1 },
+ .ls_det_clr = { 0x06a0, 4, 4, 0, 1 }
+ }
+ },
+ .chg_det = {
+ .opmode = { 0x0760, 3, 0, 5, 1 },
+ .cp_det = { 0x0884, 4, 4, 0, 1 },
+ .dcp_det = { 0x0884, 3, 3, 0, 1 },
+ .dp_det = { 0x0884, 5, 5, 0, 1 },
+ .idm_sink_en = { 0x0768, 8, 8, 0, 1 },
+ .idp_sink_en = { 0x0768, 7, 7, 0, 1 },
+ .idp_src_en = { 0x0768, 9, 9, 0, 1 },
+ .rdm_pdwn_en = { 0x0768, 10, 10, 0, 1 },
+ .vdm_src_en = { 0x0768, 12, 12, 0, 1 },
+ .vdp_src_en = { 0x0768, 11, 11, 0, 1 },
+ },
+ },
+ {
+ .reg = 0x800,
+ .num_ports = 2,
+ .clkout_ctl = { 0x0808, 4, 4, 1, 0 },
+ .port_cfgs = {
+ [USB2PHY_PORT_OTG] = {
+ .phy_sus = { 0x800, 15, 0, 0, 0x1d1 },
+ .ls_det_en = { 0x0684, 0, 0, 0, 1 },
+ .ls_det_st = { 0x0694, 0, 0, 0, 1 },
+ .ls_det_clr = { 0x06a4, 0, 0, 0, 1 }
+ },
+ [USB2PHY_PORT_HOST] = {
+ .phy_sus = { 0x804, 15, 0, 0, 0x1d1 },
+ .ls_det_en = { 0x0684, 1, 1, 0, 1 },
+ .ls_det_st = { 0x0694, 1, 1, 0, 1 },
+ .ls_det_clr = { 0x06a4, 1, 1, 0, 1 }
+ }
+ },
+ },
+ { /* sentinel */ }
+};
+
static const struct rockchip_usb2phy_cfg rk3328_phy_cfgs[] = {
{
.reg = 0x100,
@@ -1263,6 +1328,7 @@ static const struct rockchip_usb2phy_cfg rk3399_phy_cfgs[] = {
};
static const struct of_device_id rockchip_usb2phy_dt_match[] = {
+ { .compatible = "rockchip,rk3228-usb2phy", .data = &rk3228_phy_cfgs },
{ .compatible = "rockchip,rk3328-usb2phy", .data = &rk3328_phy_cfgs },
{ .compatible = "rockchip,rk3366-usb2phy", .data = &rk3366_phy_cfgs },
{ .compatible = "rockchip,rk3399-usb2phy", .data = &rk3399_phy_cfgs },
diff --git a/drivers/phy/phy-rockchip-pcie.c b/drivers/phy/rockchip/phy-rockchip-pcie.c
similarity index 100%
rename from drivers/phy/phy-rockchip-pcie.c
rename to drivers/phy/rockchip/phy-rockchip-pcie.c
diff --git a/drivers/phy/phy-rockchip-typec.c b/drivers/phy/rockchip/phy-rockchip-typec.c
similarity index 100%
rename from drivers/phy/phy-rockchip-typec.c
rename to drivers/phy/rockchip/phy-rockchip-typec.c
diff --git a/drivers/phy/phy-rockchip-usb.c b/drivers/phy/rockchip/phy-rockchip-usb.c
similarity index 100%
rename from drivers/phy/phy-rockchip-usb.c
rename to drivers/phy/rockchip/phy-rockchip-usb.c
diff --git a/drivers/phy/samsung/Kconfig b/drivers/phy/samsung/Kconfig
new file mode 100644
index 0000000..b7e0645
--- /dev/null
+++ b/drivers/phy/samsung/Kconfig
@@ -0,0 +1,95 @@
+#
+# Phy drivers for Samsung platforms
+#
+config PHY_EXYNOS_DP_VIDEO
+ tristate "EXYNOS SoC series Display Port PHY driver"
+ depends on OF
+ depends on ARCH_EXYNOS || COMPILE_TEST
+ default ARCH_EXYNOS
+ select GENERIC_PHY
+ help
+ Support for Display Port PHY found on Samsung EXYNOS SoCs.
+
+config PHY_EXYNOS_MIPI_VIDEO
+ tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver"
+ depends on HAS_IOMEM
+ depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
+ select GENERIC_PHY
+ default y if ARCH_S5PV210 || ARCH_EXYNOS
+ help
+ Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P
+ and EXYNOS SoCs.
+
+config PHY_EXYNOS_PCIE
+ bool "Exynos PCIe PHY driver"
+ depends on OF && (ARCH_EXYNOS || COMPILE_TEST)
+ select GENERIC_PHY
+ help
+ Enable PCIe PHY support for Exynos SoC series.
+ This driver provides PHY interface for Exynos PCIe controller.
+
+config PHY_SAMSUNG_USB2
+ tristate "Samsung USB 2.0 PHY driver"
+ depends on HAS_IOMEM
+ depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2
+ select GENERIC_PHY
+ select MFD_SYSCON
+ default ARCH_EXYNOS
+ help
+ Enable this to support the Samsung USB 2.0 PHY driver for Samsung
+ SoCs. This driver provides the interface for USB 2.0 PHY. Support
+ for particular PHYs will be enabled based on the SoC type in addition
+ to this driver.
+
+config PHY_EXYNOS4210_USB2
+ bool
+ depends on PHY_SAMSUNG_USB2
+ default CPU_EXYNOS4210
+
+config PHY_EXYNOS4X12_USB2
+ bool
+ depends on PHY_SAMSUNG_USB2
+ default SOC_EXYNOS3250 || SOC_EXYNOS4212 || SOC_EXYNOS4412
+
+config PHY_EXYNOS5250_USB2
+ bool
+ depends on PHY_SAMSUNG_USB2
+ default SOC_EXYNOS5250 || SOC_EXYNOS5420
+
+config PHY_S5PV210_USB2
+ bool "Support for S5PV210"
+ depends on PHY_SAMSUNG_USB2
+ depends on ARCH_S5PV210
+ help
+ Enable USB PHY support for S5PV210. This option requires that Samsung
+ USB 2.0 PHY driver is enabled and means that support for this
+ particular SoC is compiled in the driver. In case of S5PV210 two phys
+ are available - device and host.
+
+config PHY_EXYNOS5_USBDRD
+ tristate "Exynos5 SoC series USB DRD PHY driver"
+ depends on ARCH_EXYNOS && OF
+ depends on HAS_IOMEM
+ depends on USB_DWC3_EXYNOS
+ select GENERIC_PHY
+ select MFD_SYSCON
+ default y
+ help
+ Enable USB DRD PHY support for Exynos 5 SoC series.
+ This driver provides PHY interface for USB 3.0 DRD controller
+ present on Exynos5 SoC series.
+
+config PHY_EXYNOS5250_SATA
+ tristate "Exynos5250 Sata SerDes/PHY driver"
+ depends on SOC_EXYNOS5250
+ depends on HAS_IOMEM
+ depends on OF
+ select GENERIC_PHY
+ select I2C
+ select I2C_S3C2410
+ select MFD_SYSCON
+ help
+ Enable this to support SATA SerDes/Phy found on Samsung's
+ Exynos5250 based SoCs.This SerDes/Phy supports SATA 1.5 Gb/s,
+ SATA 3.0 Gb/s, SATA 6.0 Gb/s speeds. It supports one SATA host
+ port to accept one SATA device.
diff --git a/drivers/phy/samsung/Makefile b/drivers/phy/samsung/Makefile
new file mode 100644
index 0000000..20d7f24
--- /dev/null
+++ b/drivers/phy/samsung/Makefile
@@ -0,0 +1,11 @@
+obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO) += phy-exynos-dp-video.o
+obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy-exynos-mipi-video.o
+obj-$(CONFIG_PHY_EXYNOS_PCIE) += phy-exynos-pcie.o
+obj-$(CONFIG_PHY_SAMSUNG_USB2) += phy-exynos-usb2.o
+phy-exynos-usb2-y += phy-samsung-usb2.o
+phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4210_USB2) += phy-exynos4210-usb2.o
+phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4X12_USB2) += phy-exynos4x12-usb2.o
+phy-exynos-usb2-$(CONFIG_PHY_EXYNOS5250_USB2) += phy-exynos5250-usb2.o
+phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2) += phy-s5pv210-usb2.o
+obj-$(CONFIG_PHY_EXYNOS5_USBDRD) += phy-exynos5-usbdrd.o
+obj-$(CONFIG_PHY_EXYNOS5250_SATA) += phy-exynos5250-sata.o
diff --git a/drivers/phy/phy-exynos-dp-video.c b/drivers/phy/samsung/phy-exynos-dp-video.c
similarity index 100%
rename from drivers/phy/phy-exynos-dp-video.c
rename to drivers/phy/samsung/phy-exynos-dp-video.c
diff --git a/drivers/phy/phy-exynos-mipi-video.c b/drivers/phy/samsung/phy-exynos-mipi-video.c
similarity index 100%
rename from drivers/phy/phy-exynos-mipi-video.c
rename to drivers/phy/samsung/phy-exynos-mipi-video.c
diff --git a/drivers/phy/phy-exynos-pcie.c b/drivers/phy/samsung/phy-exynos-pcie.c
similarity index 100%
rename from drivers/phy/phy-exynos-pcie.c
rename to drivers/phy/samsung/phy-exynos-pcie.c
diff --git a/drivers/phy/phy-exynos4210-usb2.c b/drivers/phy/samsung/phy-exynos4210-usb2.c
similarity index 100%
rename from drivers/phy/phy-exynos4210-usb2.c
rename to drivers/phy/samsung/phy-exynos4210-usb2.c
diff --git a/drivers/phy/phy-exynos4x12-usb2.c b/drivers/phy/samsung/phy-exynos4x12-usb2.c
similarity index 100%
rename from drivers/phy/phy-exynos4x12-usb2.c
rename to drivers/phy/samsung/phy-exynos4x12-usb2.c
diff --git a/drivers/phy/phy-exynos5-usbdrd.c b/drivers/phy/samsung/phy-exynos5-usbdrd.c
similarity index 100%
rename from drivers/phy/phy-exynos5-usbdrd.c
rename to drivers/phy/samsung/phy-exynos5-usbdrd.c
diff --git a/drivers/phy/phy-exynos5250-sata.c b/drivers/phy/samsung/phy-exynos5250-sata.c
similarity index 100%
rename from drivers/phy/phy-exynos5250-sata.c
rename to drivers/phy/samsung/phy-exynos5250-sata.c
diff --git a/drivers/phy/phy-exynos5250-usb2.c b/drivers/phy/samsung/phy-exynos5250-usb2.c
similarity index 100%
rename from drivers/phy/phy-exynos5250-usb2.c
rename to drivers/phy/samsung/phy-exynos5250-usb2.c
diff --git a/drivers/phy/phy-s5pv210-usb2.c b/drivers/phy/samsung/phy-s5pv210-usb2.c
similarity index 100%
rename from drivers/phy/phy-s5pv210-usb2.c
rename to drivers/phy/samsung/phy-s5pv210-usb2.c
diff --git a/drivers/phy/phy-samsung-usb2.c b/drivers/phy/samsung/phy-samsung-usb2.c
similarity index 100%
rename from drivers/phy/phy-samsung-usb2.c
rename to drivers/phy/samsung/phy-samsung-usb2.c
diff --git a/drivers/phy/phy-samsung-usb2.h b/drivers/phy/samsung/phy-samsung-usb2.h
similarity index 100%
rename from drivers/phy/phy-samsung-usb2.h
rename to drivers/phy/samsung/phy-samsung-usb2.h
diff --git a/drivers/phy/st/Kconfig b/drivers/phy/st/Kconfig
new file mode 100644
index 0000000..0814d3f
--- /dev/null
+++ b/drivers/phy/st/Kconfig
@@ -0,0 +1,33 @@
+#
+# Phy drivers for STMicro platforms
+#
+config PHY_MIPHY28LP
+ tristate "STMicroelectronics MIPHY28LP PHY driver for STiH407"
+ depends on ARCH_STI
+ select GENERIC_PHY
+ help
+ Enable this to support the miphy transceiver (for SATA/PCIE/USB3)
+ that is part of STMicroelectronics STiH407 SoC.
+
+config PHY_ST_SPEAR1310_MIPHY
+ tristate "ST SPEAR1310-MIPHY driver"
+ select GENERIC_PHY
+ depends on MACH_SPEAR1310 || COMPILE_TEST
+ help
+ Support for ST SPEAr1310 MIPHY which can be used for PCIe and SATA.
+
+config PHY_ST_SPEAR1340_MIPHY
+ tristate "ST SPEAR1340-MIPHY driver"
+ select GENERIC_PHY
+ depends on MACH_SPEAR1340 || COMPILE_TEST
+ help
+ Support for ST SPEAr1340 MIPHY which can be used for PCIe and SATA.
+
+config PHY_STIH407_USB
+ tristate "STMicroelectronics USB2 picoPHY driver for STiH407 family"
+ depends on RESET_CONTROLLER
+ depends on ARCH_STI || COMPILE_TEST
+ select GENERIC_PHY
+ help
+ Enable this support to enable the picoPHY device used by USB2
+ and USB3 controllers on STMicroelectronics STiH407 SoC families.
diff --git a/drivers/phy/st/Makefile b/drivers/phy/st/Makefile
new file mode 100644
index 0000000..e2adfe21
--- /dev/null
+++ b/drivers/phy/st/Makefile
@@ -0,0 +1,4 @@
+obj-$(CONFIG_PHY_MIPHY28LP) += phy-miphy28lp.o
+obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY) += phy-spear1310-miphy.o
+obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY) += phy-spear1340-miphy.o
+obj-$(CONFIG_PHY_STIH407_USB) += phy-stih407-usb.o
diff --git a/drivers/phy/phy-miphy28lp.c b/drivers/phy/st/phy-miphy28lp.c
similarity index 100%
rename from drivers/phy/phy-miphy28lp.c
rename to drivers/phy/st/phy-miphy28lp.c
diff --git a/drivers/phy/phy-spear1310-miphy.c b/drivers/phy/st/phy-spear1310-miphy.c
similarity index 100%
rename from drivers/phy/phy-spear1310-miphy.c
rename to drivers/phy/st/phy-spear1310-miphy.c
diff --git a/drivers/phy/phy-spear1340-miphy.c b/drivers/phy/st/phy-spear1340-miphy.c
similarity index 100%
rename from drivers/phy/phy-spear1340-miphy.c
rename to drivers/phy/st/phy-spear1340-miphy.c
diff --git a/drivers/phy/phy-stih407-usb.c b/drivers/phy/st/phy-stih407-usb.c
similarity index 100%
rename from drivers/phy/phy-stih407-usb.c
rename to drivers/phy/st/phy-stih407-usb.c
diff --git a/drivers/phy/ti/Kconfig b/drivers/phy/ti/Kconfig
new file mode 100644
index 0000000..2050356
--- /dev/null
+++ b/drivers/phy/ti/Kconfig
@@ -0,0 +1,78 @@
+#
+# Phy drivers for TI platforms
+#
+config PHY_DA8XX_USB
+ tristate "TI DA8xx USB PHY Driver"
+ depends on ARCH_DAVINCI_DA8XX
+ select GENERIC_PHY
+ select MFD_SYSCON
+ help
+ Enable this to support the USB PHY on DA8xx SoCs.
+
+ This driver controls both the USB 1.1 PHY and the USB 2.0 PHY.
+
+config PHY_DM816X_USB
+ tristate "TI dm816x USB PHY driver"
+ depends on ARCH_OMAP2PLUS
+ depends on USB_SUPPORT
+ select GENERIC_PHY
+ select USB_PHY
+ help
+ Enable this for dm816x USB to work.
+
+config OMAP_CONTROL_PHY
+ tristate "OMAP CONTROL PHY Driver"
+ depends on ARCH_OMAP2PLUS || COMPILE_TEST
+ help
+ Enable this to add support for the PHY part present in the control
+ module. This driver has API to power on the USB2 PHY and to write to
+ the mailbox. The mailbox is present only in omap4 and the register to
+ power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an
+ additional register to power on USB3 PHY/SATA PHY/PCIE PHY
+ (PIPE3 PHY).
+
+config OMAP_USB2
+ tristate "OMAP USB2 PHY Driver"
+ depends on ARCH_OMAP2PLUS
+ depends on USB_SUPPORT
+ select GENERIC_PHY
+ select USB_PHY
+ select OMAP_CONTROL_PHY
+ depends on OMAP_OCP2SCP
+ help
+ Enable this to support the transceiver that is part of SOC. This
+ driver takes care of all the PHY functionality apart from comparator.
+ The USB OTG controller communicates with the comparator using this
+ driver.
+
+config TI_PIPE3
+ tristate "TI PIPE3 PHY Driver"
+ depends on ARCH_OMAP2PLUS || COMPILE_TEST
+ select GENERIC_PHY
+ select OMAP_CONTROL_PHY
+ depends on OMAP_OCP2SCP
+ help
+ Enable this to support the PIPE3 PHY that is part of TI SOCs. This
+ driver takes care of all the PHY functionality apart from comparator.
+ This driver interacts with the "OMAP Control PHY Driver" to power
+ on/off the PHY.
+
+config PHY_TUSB1210
+ tristate "TI TUSB1210 ULPI PHY module"
+ depends on USB_ULPI_BUS
+ select GENERIC_PHY
+ help
+ Support for TI TUSB1210 USB ULPI PHY.
+
+config TWL4030_USB
+ tristate "TWL4030 USB Transceiver Driver"
+ depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS
+ depends on USB_SUPPORT
+ depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't 'y'
+ select GENERIC_PHY
+ select USB_PHY
+ help
+ Enable this to support the USB OTG transceiver on TWL4030
+ family chips (including the TWL5030 and TPS659x0 devices).
+ This transceiver supports high and full speed devices plus,
+ in host mode, low speed.
diff --git a/drivers/phy/ti/Makefile b/drivers/phy/ti/Makefile
new file mode 100644
index 0000000..0cc3a1a
--- /dev/null
+++ b/drivers/phy/ti/Makefile
@@ -0,0 +1,7 @@
+obj-$(CONFIG_PHY_DA8XX_USB) += phy-da8xx-usb.o
+obj-$(CONFIG_PHY_DM816X_USB) += phy-dm816x-usb.o
+obj-$(CONFIG_OMAP_CONTROL_PHY) += phy-omap-control.o
+obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o
+obj-$(CONFIG_TI_PIPE3) += phy-ti-pipe3.o
+obj-$(CONFIG_PHY_TUSB1210) += phy-tusb1210.o
+obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o
diff --git a/drivers/phy/phy-da8xx-usb.c b/drivers/phy/ti/phy-da8xx-usb.c
similarity index 100%
rename from drivers/phy/phy-da8xx-usb.c
rename to drivers/phy/ti/phy-da8xx-usb.c
diff --git a/drivers/phy/phy-dm816x-usb.c b/drivers/phy/ti/phy-dm816x-usb.c
similarity index 100%
rename from drivers/phy/phy-dm816x-usb.c
rename to drivers/phy/ti/phy-dm816x-usb.c
diff --git a/drivers/phy/phy-omap-control.c b/drivers/phy/ti/phy-omap-control.c
similarity index 100%
rename from drivers/phy/phy-omap-control.c
rename to drivers/phy/ti/phy-omap-control.c
diff --git a/drivers/phy/phy-omap-usb2.c b/drivers/phy/ti/phy-omap-usb2.c
similarity index 100%
rename from drivers/phy/phy-omap-usb2.c
rename to drivers/phy/ti/phy-omap-usb2.c
diff --git a/drivers/phy/phy-ti-pipe3.c b/drivers/phy/ti/phy-ti-pipe3.c
similarity index 100%
rename from drivers/phy/phy-ti-pipe3.c
rename to drivers/phy/ti/phy-ti-pipe3.c
diff --git a/drivers/phy/phy-tusb1210.c b/drivers/phy/ti/phy-tusb1210.c
similarity index 78%
rename from drivers/phy/phy-tusb1210.c
rename to drivers/phy/ti/phy-tusb1210.c
index 4f6d5e7..b8ec39a 100644
--- a/drivers/phy/phy-tusb1210.c
+++ b/drivers/phy/ti/phy-tusb1210.c
@@ -11,9 +11,9 @@
*/
#include <linux/module.h>
#include <linux/ulpi/driver.h>
+#include <linux/ulpi/regs.h>
#include <linux/gpio/consumer.h>
-
-#include "ulpi_phy.h"
+#include <linux/phy/ulpi_phy.h>
#define TUSB1210_VENDOR_SPECIFIC2 0x80
#define TUSB1210_VENDOR_SPECIFIC2_IHSTX_SHIFT 0
@@ -53,9 +53,43 @@ static int tusb1210_power_off(struct phy *phy)
return 0;
}
+static int tusb1210_set_mode(struct phy *phy, enum phy_mode mode)
+{
+ struct tusb1210 *tusb = phy_get_drvdata(phy);
+ int ret;
+
+ ret = ulpi_read(tusb->ulpi, ULPI_OTG_CTRL);
+ if (ret < 0)
+ return ret;
+
+ switch (mode) {
+ case PHY_MODE_USB_HOST:
+ ret |= (ULPI_OTG_CTRL_DRVVBUS_EXT
+ | ULPI_OTG_CTRL_ID_PULLUP
+ | ULPI_OTG_CTRL_DP_PULLDOWN
+ | ULPI_OTG_CTRL_DM_PULLDOWN);
+ ulpi_write(tusb->ulpi, ULPI_OTG_CTRL, ret);
+ ret |= ULPI_OTG_CTRL_DRVVBUS;
+ break;
+ case PHY_MODE_USB_DEVICE:
+ ret &= ~(ULPI_OTG_CTRL_DRVVBUS
+ | ULPI_OTG_CTRL_DP_PULLDOWN
+ | ULPI_OTG_CTRL_DM_PULLDOWN);
+ ulpi_write(tusb->ulpi, ULPI_OTG_CTRL, ret);
+ ret &= ~ULPI_OTG_CTRL_DRVVBUS_EXT;
+ break;
+ default:
+ /* nothing */
+ return 0;
+ }
+
+ return ulpi_write(tusb->ulpi, ULPI_OTG_CTRL, ret);
+}
+
static const struct phy_ops phy_ops = {
.power_on = tusb1210_power_on,
.power_off = tusb1210_power_off,
+ .set_mode = tusb1210_set_mode,
.owner = THIS_MODULE,
};
@@ -125,7 +159,8 @@ static void tusb1210_remove(struct ulpi *ulpi)
#define TI_VENDOR_ID 0x0451
static const struct ulpi_device_id tusb1210_ulpi_id[] = {
- { TI_VENDOR_ID, 0x1507, },
+ { TI_VENDOR_ID, 0x1507, }, /* TUSB1210 */
+ { TI_VENDOR_ID, 0x1508, }, /* TUSB1211 */
{ },
};
MODULE_DEVICE_TABLE(ulpi, tusb1210_ulpi_id);
diff --git a/drivers/phy/phy-twl4030-usb.c b/drivers/phy/ti/phy-twl4030-usb.c
similarity index 100%
rename from drivers/phy/phy-twl4030-usb.c
rename to drivers/phy/ti/phy-twl4030-usb.c
diff --git a/drivers/thermal/max77620_thermal.c b/drivers/thermal/max77620_thermal.c
index e9a1fe3..159bbce 100644
--- a/drivers/thermal/max77620_thermal.c
+++ b/drivers/thermal/max77620_thermal.c
@@ -104,8 +104,6 @@ static int max77620_thermal_probe(struct platform_device *pdev)
return -EINVAL;
}
- pdev->dev.of_node = pdev->dev.parent->of_node;
-
mtherm->dev = &pdev->dev;
mtherm->rmap = dev_get_regmap(pdev->dev.parent, NULL);
if (!mtherm->rmap) {
@@ -113,6 +111,12 @@ static int max77620_thermal_probe(struct platform_device *pdev)
return -ENODEV;
}
+ /*
+ * The reference taken to the parent's node which will be balanced on
+ * reprobe or on platform-device release.
+ */
+ device_set_of_node_from_dev(&pdev->dev, pdev->dev.parent);
+
mtherm->tz_device = devm_thermal_zone_of_sensor_register(&pdev->dev, 0,
mtherm, &max77620_thermal_ops);
if (IS_ERR(mtherm->tz_device)) {
diff --git a/drivers/usb/chipidea/otg_fsm.c b/drivers/usb/chipidea/otg_fsm.c
index 93e24ce..949183e 100644
--- a/drivers/usb/chipidea/otg_fsm.c
+++ b/drivers/usb/chipidea/otg_fsm.c
@@ -234,7 +234,7 @@ static void ci_otg_add_timer(struct ci_hdrc *ci, enum otg_fsm_timer t)
ktime_set(timer_sec, timer_nsec));
ci->enabled_otg_timer_bits |= (1 << t);
if ((ci->next_otg_timer == NUM_OTG_FSM_TIMERS) ||
- (ci->hr_timeouts[ci->next_otg_timer] >
+ ktime_after(ci->hr_timeouts[ci->next_otg_timer],
ci->hr_timeouts[t])) {
ci->next_otg_timer = t;
hrtimer_start_range_ns(&ci->otg_fsm_hrtimer,
@@ -269,7 +269,7 @@ static void ci_otg_del_timer(struct ci_hdrc *ci, enum otg_fsm_timer t)
for_each_set_bit(cur_timer, &enabled_timer_bits,
NUM_OTG_FSM_TIMERS) {
if ((next_timer == NUM_OTG_FSM_TIMERS) ||
- (ci->hr_timeouts[next_timer] <
+ ktime_before(ci->hr_timeouts[next_timer],
ci->hr_timeouts[cur_timer]))
next_timer = cur_timer;
}
@@ -397,13 +397,13 @@ static enum hrtimer_restart ci_otg_hrtimer_func(struct hrtimer *t)
now = ktime_get();
for_each_set_bit(cur_timer, &enabled_timer_bits, NUM_OTG_FSM_TIMERS) {
- if (now >= ci->hr_timeouts[cur_timer]) {
+ if (ktime_compare(now, ci->hr_timeouts[cur_timer]) >= 0) {
ci->enabled_otg_timer_bits &= ~(1 << cur_timer);
if (otg_timer_handlers[cur_timer])
ret = otg_timer_handlers[cur_timer](ci);
} else {
if ((next_timer == NUM_OTG_FSM_TIMERS) ||
- (ci->hr_timeouts[cur_timer] <
+ ktime_before(ci->hr_timeouts[cur_timer],
ci->hr_timeouts[next_timer]))
next_timer = cur_timer;
}
diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
index 08669fe..8f97224 100644
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -361,17 +361,9 @@ static ssize_t wdm_write
if (we < 0)
return usb_translate_errors(we);
- buf = kmalloc(count, GFP_KERNEL);
- if (!buf) {
- rv = -ENOMEM;
- goto outnl;
- }
-
- r = copy_from_user(buf, buffer, count);
- if (r > 0) {
- rv = -EFAULT;
- goto out_free_mem;
- }
+ buf = memdup_user(buffer, count);
+ if (IS_ERR(buf))
+ return PTR_ERR(buf);
/* concurrent writes and disconnect */
r = mutex_lock_interruptible(&desc->wlock);
@@ -441,8 +433,7 @@ static ssize_t wdm_write
usb_autopm_put_interface(desc->intf);
mutex_unlock(&desc->wlock);
-outnl:
- return rv < 0 ? rv : count;
+ return count;
out_free_mem_pm:
usb_autopm_put_interface(desc->intf);
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index 8e6ef67..0e7d0e81 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -2537,6 +2537,9 @@ static long usbdev_do_ioctl(struct file *file, unsigned int cmd,
case USBDEVFS_DROP_PRIVILEGES:
ret = proc_drop_privileges(ps, p);
break;
+ case USBDEVFS_GET_SPEED:
+ ret = ps->dev->speed;
+ break;
}
done:
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 5dea983..ab1bb3b 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -26,6 +26,7 @@
#include <linux/module.h>
#include <linux/version.h>
#include <linux/kernel.h>
+#include <linux/sched/task_stack.h>
#include <linux/slab.h>
#include <linux/completion.h>
#include <linux/utsname.h>
@@ -1076,7 +1077,6 @@ static void usb_deregister_bus (struct usb_bus *bus)
static int register_root_hub(struct usb_hcd *hcd)
{
struct device *parent_dev = hcd->self.controller;
- struct device *sysdev = hcd->self.sysdev;
struct usb_device *usb_dev = hcd->self.root_hub;
const int devnum = 1;
int retval;
@@ -1123,7 +1123,6 @@ static int register_root_hub(struct usb_hcd *hcd)
/* Did the HC die before the root hub was registered? */
if (HCD_DEAD(hcd))
usb_hc_died (hcd); /* This time clean up */
- usb_dev->dev.of_node = sysdev->of_node;
}
mutex_unlock(&usb_bus_idr_lock);
@@ -1523,6 +1522,14 @@ int usb_hcd_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
if (hcd->self.uses_pio_for_control)
return ret;
if (IS_ENABLED(CONFIG_HAS_DMA) && hcd->self.uses_dma) {
+ if (is_vmalloc_addr(urb->setup_packet)) {
+ WARN_ONCE(1, "setup packet is not dma capable\n");
+ return -EAGAIN;
+ } else if (object_is_on_stack(urb->setup_packet)) {
+ WARN_ONCE(1, "setup packet is on stack\n");
+ return -EAGAIN;
+ }
+
urb->setup_dma = dma_map_single(
hcd->self.sysdev,
urb->setup_packet,
@@ -1587,6 +1594,9 @@ int usb_hcd_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
} else if (is_vmalloc_addr(urb->transfer_buffer)) {
WARN_ONCE(1, "transfer buffer not dma capable\n");
ret = -EAGAIN;
+ } else if (object_is_on_stack(urb->transfer_buffer)) {
+ WARN_ONCE(1, "transfer buffer is on stack\n");
+ ret = -EAGAIN;
} else {
urb->transfer_dma = dma_map_single(
hcd->self.sysdev,
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index b8bb20d..59e0418 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -3155,12 +3155,6 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg)
if (PMSG_IS_AUTO(msg))
goto err_ltm;
}
- if (usb_unlocked_disable_lpm(udev)) {
- dev_err(&udev->dev, "Failed to disable LPM before suspend\n.");
- status = -ENOMEM;
- if (PMSG_IS_AUTO(msg))
- goto err_lpm3;
- }
/* see 7.1.7.6 */
if (hub_is_superspeed(hub->hdev))
@@ -3187,9 +3181,7 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg)
if (status) {
dev_dbg(&port_dev->dev, "can't suspend, status %d\n", status);
- /* Try to enable USB3 LPM and LTM again */
- usb_unlocked_enable_lpm(udev);
- err_lpm3:
+ /* Try to enable USB3 LTM again */
usb_enable_ltm(udev);
err_ltm:
/* Try to enable USB2 hardware LPM again */
@@ -3473,9 +3465,8 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg)
if (udev->usb2_hw_lpm_capable == 1)
usb_set_usb2_hardware_lpm(udev, 1);
- /* Try to enable USB3 LTM and LPM */
+ /* Try to enable USB3 LTM */
usb_enable_ltm(udev);
- usb_unlocked_enable_lpm(udev);
}
usb_unlock_port(port_dev);
diff --git a/drivers/usb/core/of.c b/drivers/usb/core/of.c
index d563cbc..3863bb1 100644
--- a/drivers/usb/core/of.c
+++ b/drivers/usb/core/of.c
@@ -28,7 +28,8 @@
*
* Find the node from device tree according to its port number.
*
- * Return: On success, a pointer to the device node, %NULL on failure.
+ * Return: A pointer to the node with incremented refcount if found, or
+ * %NULL otherwise.
*/
struct device_node *usb_of_get_child_node(struct device_node *parent,
int portnum)
diff --git a/drivers/usb/core/usb-acpi.c b/drivers/usb/core/usb-acpi.c
index 2776cfe..ef9cf4a 100644
--- a/drivers/usb/core/usb-acpi.c
+++ b/drivers/usb/core/usb-acpi.c
@@ -127,6 +127,22 @@ static enum usb_port_connect_type usb_acpi_get_connect_type(acpi_handle handle,
*/
#define USB_ACPI_LOCATION_VALID (1 << 31)
+static struct acpi_device *usb_acpi_find_port(struct acpi_device *parent,
+ int raw)
+{
+ struct acpi_device *adev;
+
+ if (!parent)
+ return NULL;
+
+ list_for_each_entry(adev, &parent->children, node) {
+ if (acpi_device_adr(adev) == raw)
+ return adev;
+ }
+
+ return acpi_find_child_device(parent, raw, false);
+}
+
static struct acpi_device *usb_acpi_find_companion(struct device *dev)
{
struct usb_device *udev;
@@ -174,8 +190,10 @@ static struct acpi_device *usb_acpi_find_companion(struct device *dev)
int raw;
raw = usb_hcd_find_raw_port_number(hcd, port1);
- adev = acpi_find_child_device(ACPI_COMPANION(&udev->dev),
- raw, false);
+
+ adev = usb_acpi_find_port(ACPI_COMPANION(&udev->dev),
+ raw);
+
if (!adev)
return NULL;
} else {
@@ -186,7 +204,9 @@ static struct acpi_device *usb_acpi_find_companion(struct device *dev)
return NULL;
acpi_bus_get_device(parent_handle, &adev);
- adev = acpi_find_child_device(adev, port1, false);
+
+ adev = usb_acpi_find_port(adev, port1);
+
if (!adev)
return NULL;
}
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index 28b053c..17681d5 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -416,6 +416,7 @@ static void usb_release_dev(struct device *dev)
usb_destroy_configuration(udev);
usb_release_bos_descriptor(udev);
+ of_node_put(dev->of_node);
usb_put_hcd(hcd);
kfree(udev->product);
kfree(udev->manufacturer);
@@ -614,6 +615,7 @@ struct usb_device *usb_alloc_dev(struct usb_device *parent,
dev->route = 0;
dev->dev.parent = bus->controller;
+ device_set_of_node_from_dev(&dev->dev, bus->sysdev);
dev_set_name(&dev->dev, "usb%d", bus->busnum);
root_hub = 1;
} else {
diff --git a/drivers/usb/early/xhci-dbc.c b/drivers/usb/early/xhci-dbc.c
index 1268818..12fe70b 100644
--- a/drivers/usb/early/xhci-dbc.c
+++ b/drivers/usb/early/xhci-dbc.c
@@ -32,7 +32,6 @@
static struct xdbc_state xdbc;
static bool early_console_keep;
-#define XDBC_TRACE
#ifdef XDBC_TRACE
#define xdbc_trace trace_printk
#else
diff --git a/drivers/usb/gadget/udc/core.c b/drivers/usb/gadget/udc/core.c
index efce68e..a03aec5 100644
--- a/drivers/usb/gadget/udc/core.c
+++ b/drivers/usb/gadget/udc/core.c
@@ -23,6 +23,7 @@
#include <linux/list.h>
#include <linux/err.h>
#include <linux/dma-mapping.h>
+#include <linux/sched/task_stack.h>
#include <linux/workqueue.h>
#include <linux/usb/ch9.h>
@@ -798,6 +799,14 @@ int usb_gadget_map_request_by_dev(struct device *dev,
req->num_mapped_sgs = mapped;
} else {
+ if (is_vmalloc_addr(req->buf)) {
+ dev_err(dev, "buffer is not dma capable\n");
+ return -EFAULT;
+ } else if (object_is_on_stack(req->buf)) {
+ dev_err(dev, "buffer is on stack\n");
+ return -EFAULT;
+ }
+
req->dma = dma_map_single(dev, req->buf, req->length,
is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index ababb91d..fa5692d 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -473,8 +473,12 @@
config USB_OHCI_HCD_OMAP3
tristate "OHCI support for OMAP3 and later chips"
depends on (ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5)
+ select USB_OHCI_HCD_PLATFORM
default y
- ---help---
+ help
+ This option is deprecated now and the driver was removed, use
+ USB_OHCI_HCD_PLATFORM instead.
+
Enables support for the on-chip OHCI controller on
OMAP3 and later chips.
@@ -627,7 +631,11 @@
config USB_UHCI_PLATFORM
bool
- default y if ARCH_VT8500
+ default y if (ARCH_VT8500 || ARCH_ASPEED)
+
+config USB_UHCI_ASPEED
+ bool
+ default y if ARCH_ASPEED
config USB_UHCI_BIG_ENDIAN_MMIO
bool
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index c77b0a3..cf2691f 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -52,7 +52,6 @@
obj-$(CONFIG_USB_OHCI_HCD_PLATFORM) += ohci-platform.o
obj-$(CONFIG_USB_OHCI_EXYNOS) += ohci-exynos.o
obj-$(CONFIG_USB_OHCI_HCD_OMAP1) += ohci-omap.o
-obj-$(CONFIG_USB_OHCI_HCD_OMAP3) += ohci-omap3.o
obj-$(CONFIG_USB_OHCI_HCD_SPEAR) += ohci-spear.o
obj-$(CONFIG_USB_OHCI_HCD_STI) += ohci-st.o
obj-$(CONFIG_USB_OHCI_HCD_AT91) += ohci-at91.o
diff --git a/drivers/usb/host/ehci-exynos.c b/drivers/usb/host/ehci-exynos.c
index 7a603f6..26b6411 100644
--- a/drivers/usb/host/ehci-exynos.c
+++ b/drivers/usb/host/ehci-exynos.c
@@ -279,7 +279,9 @@ static int exynos_ehci_resume(struct device *dev)
struct exynos_ehci_hcd *exynos_ehci = to_exynos_ehci(hcd);
int ret;
- clk_prepare_enable(exynos_ehci->clk);
+ ret = clk_prepare_enable(exynos_ehci->clk);
+ if (ret)
+ return ret;
ret = exynos_ehci_phy_enable(dev);
if (ret) {
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index 980a6b3..6bc6304 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -1105,7 +1105,7 @@ iso_stream_init(
addr |= epnum << 8;
addr |= dev->devnum;
stream->ps.usecs = HS_USECS_ISO(maxp);
- think_time = dev->tt ? dev->tt->think_time : 0;
+ think_time = dev->tt->think_time;
stream->ps.tt_usecs = NS_TO_US(think_time + usb_calc_bus_time(
dev->speed, is_input, 1, maxp));
hs_transfers = max(1u, (maxp + 187) / 188);
diff --git a/drivers/usb/host/ehci-timer.c b/drivers/usb/host/ehci-timer.c
index 3893b5b..0b6cdb7 100644
--- a/drivers/usb/host/ehci-timer.c
+++ b/drivers/usb/host/ehci-timer.c
@@ -424,7 +424,7 @@ static enum hrtimer_restart ehci_hrtimer_func(struct hrtimer *t)
*/
now = ktime_get();
for_each_set_bit(e, &events, EHCI_HRTIMER_NUM_EVENTS) {
- if (now >= ehci->hr_timeouts[e])
+ if (ktime_compare(now, ehci->hr_timeouts[e]) >= 0)
event_handlers[e](ehci);
else
ehci_enable_event(ehci, e, false);
diff --git a/drivers/usb/host/fotg210-hcd.c b/drivers/usb/host/fotg210-hcd.c
index ced08dc..457cc65 100644
--- a/drivers/usb/host/fotg210-hcd.c
+++ b/drivers/usb/host/fotg210-hcd.c
@@ -1380,7 +1380,7 @@ static enum hrtimer_restart fotg210_hrtimer_func(struct hrtimer *t)
*/
now = ktime_get();
for_each_set_bit(e, &events, FOTG210_HRTIMER_NUM_EVENTS) {
- if (now >= fotg210->hr_timeouts[e])
+ if (ktime_compare(now, fotg210->hr_timeouts[e]) >= 0)
event_handlers[e](fotg210);
else
fotg210_enable_event(fotg210, e, false);
diff --git a/drivers/usb/host/ohci-omap3.c b/drivers/usb/host/ohci-omap3.c
deleted file mode 100644
index ec15aeb..0000000
--- a/drivers/usb/host/ohci-omap3.c
+++ /dev/null
@@ -1,211 +0,0 @@
-/*
- * ohci-omap3.c - driver for OHCI on OMAP3 and later processors
- *
- * Bus Glue for OMAP3 USBHOST 3 port OHCI controller
- * This controller is also used in later OMAPs and AM35x chips
- *
- * Copyright (C) 2007-2010 Texas Instruments, Inc.
- * Author: Vikram Pandita <vikram.pandita@ti.com>
- * Author: Anand Gadiyar <gadiyar@ti.com>
- * Author: Keshava Munegowda <keshava_mgowda@ti.com>
- *
- * Based on ehci-omap.c and some other ohci glue layers
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * TODO (last updated Feb 27, 2011):
- * - add kernel-doc
- */
-
-#include <linux/dma-mapping.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/usb/otg.h>
-#include <linux/platform_device.h>
-#include <linux/pm_runtime.h>
-#include <linux/usb.h>
-#include <linux/usb/hcd.h>
-
-#include "ohci.h"
-
-#define DRIVER_DESC "OHCI OMAP3 driver"
-
-static const char hcd_name[] = "ohci-omap3";
-static struct hc_driver __read_mostly ohci_omap3_hc_driver;
-
-/*
- * configure so an HC device and id are always provided
- * always called with process context; sleeping is OK
- */
-
-/**
- * ohci_hcd_omap3_probe - initialize OMAP-based HCDs
- *
- * Allocates basic resources for this USB host controller, and
- * then invokes the start() method for the HCD associated with it
- * through the hotplug entry's driver_data.
- */
-static int ohci_hcd_omap3_probe(struct platform_device *pdev)
-{
- struct device *dev = &pdev->dev;
- struct ohci_hcd *ohci;
- struct usb_hcd *hcd = NULL;
- void __iomem *regs = NULL;
- struct resource *res;
- int ret;
- int irq;
-
- if (usb_disabled())
- return -ENODEV;
-
- if (!dev->parent) {
- dev_err(dev, "Missing parent device\n");
- return -ENODEV;
- }
-
- irq = platform_get_irq(pdev, 0);
- if (irq < 0) {
- dev_err(dev, "OHCI irq failed\n");
- return -ENODEV;
- }
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- dev_err(dev, "UHH OHCI get resource failed\n");
- return -ENOMEM;
- }
-
- regs = ioremap(res->start, resource_size(res));
- if (!regs) {
- dev_err(dev, "UHH OHCI ioremap failed\n");
- return -ENOMEM;
- }
-
- /*
- * Right now device-tree probed devices don't get dma_mask set.
- * Since shared usb code relies on it, set it here for now.
- * Once we have dma capability bindings this can go away.
- */
- ret = dma_coerce_mask_and_coherent(dev, DMA_BIT_MASK(32));
- if (ret)
- goto err_io;
-
- ret = -ENODEV;
- hcd = usb_create_hcd(&ohci_omap3_hc_driver, dev,
- dev_name(dev));
- if (!hcd) {
- dev_err(dev, "usb_create_hcd failed\n");
- goto err_io;
- }
-
- hcd->rsrc_start = res->start;
- hcd->rsrc_len = resource_size(res);
- hcd->regs = regs;
-
- pm_runtime_enable(dev);
- pm_runtime_get_sync(dev);
-
- ohci = hcd_to_ohci(hcd);
- /*
- * RemoteWakeupConnected has to be set explicitly before
- * calling ohci_run. The reset value of RWC is 0.
- */
- ohci->hc_control = OHCI_CTRL_RWC;
-
- ret = usb_add_hcd(hcd, irq, 0);
- if (ret) {
- dev_dbg(dev, "failed to add hcd with err %d\n", ret);
- goto err_add_hcd;
- }
- device_wakeup_enable(hcd->self.controller);
-
- return 0;
-
-err_add_hcd:
- pm_runtime_put_sync(dev);
- usb_put_hcd(hcd);
-
-err_io:
- iounmap(regs);
-
- return ret;
-}
-
-/*
- * may be called without controller electrically present
- * may be called with controller, bus, and devices active
- */
-
-/**
- * ohci_hcd_omap3_remove - shutdown processing for OHCI HCDs
- * @pdev: USB Host Controller being removed
- *
- * Reverses the effect of ohci_hcd_omap3_probe(), first invoking
- * the HCD's stop() method. It is always called from a thread
- * context, normally "rmmod", "apmd", or something similar.
- */
-static int ohci_hcd_omap3_remove(struct platform_device *pdev)
-{
- struct device *dev = &pdev->dev;
- struct usb_hcd *hcd = dev_get_drvdata(dev);
-
- iounmap(hcd->regs);
- usb_remove_hcd(hcd);
- pm_runtime_put_sync(dev);
- pm_runtime_disable(dev);
- usb_put_hcd(hcd);
- return 0;
-}
-
-static const struct of_device_id omap_ohci_dt_ids[] = {
- { .compatible = "ti,ohci-omap3" },
- { }
-};
-
-MODULE_DEVICE_TABLE(of, omap_ohci_dt_ids);
-
-static struct platform_driver ohci_hcd_omap3_driver = {
- .probe = ohci_hcd_omap3_probe,
- .remove = ohci_hcd_omap3_remove,
- .shutdown = usb_hcd_platform_shutdown,
- .driver = {
- .name = "ohci-omap3",
- .of_match_table = omap_ohci_dt_ids,
- },
-};
-
-static int __init ohci_omap3_init(void)
-{
- if (usb_disabled())
- return -ENODEV;
-
- pr_info("%s: " DRIVER_DESC "\n", hcd_name);
-
- ohci_init_driver(&ohci_omap3_hc_driver, NULL);
- return platform_driver_register(&ohci_hcd_omap3_driver);
-}
-module_init(ohci_omap3_init);
-
-static void __exit ohci_omap3_cleanup(void)
-{
- platform_driver_unregister(&ohci_hcd_omap3_driver);
-}
-module_exit(ohci_omap3_cleanup);
-
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_ALIAS("platform:ohci-omap3");
-MODULE_AUTHOR("Anand Gadiyar <gadiyar@ti.com>");
-MODULE_LICENSE("GPL");
diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c
index 6368fce..61fe2b9 100644
--- a/drivers/usb/host/ohci-platform.c
+++ b/drivers/usb/host/ohci-platform.c
@@ -24,6 +24,7 @@
#include <linux/err.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
#include <linux/reset.h>
#include <linux/usb/ohci_pdriver.h>
#include <linux/usb.h>
@@ -163,6 +164,10 @@ static int ohci_platform_probe(struct platform_device *dev)
if (of_property_read_bool(dev->dev.of_node, "no-big-frame-no"))
ohci->flags |= OHCI_QUIRK_FRAME_NO;
+ if (of_property_read_bool(dev->dev.of_node,
+ "remote-wakeup-connected"))
+ ohci->hc_control = OHCI_CTRL_RWC;
+
of_property_read_u32(dev->dev.of_node, "num-ports",
&ohci->num_ports);
@@ -242,6 +247,8 @@ static int ohci_platform_probe(struct platform_device *dev)
}
#endif
+ pm_runtime_set_active(&dev->dev);
+ pm_runtime_enable(&dev->dev);
if (pdata->power_on) {
err = pdata->power_on(dev);
if (err < 0)
@@ -271,6 +278,7 @@ static int ohci_platform_probe(struct platform_device *dev)
if (pdata->power_off)
pdata->power_off(dev);
err_reset:
+ pm_runtime_disable(&dev->dev);
while (--rst >= 0)
reset_control_assert(priv->resets[rst]);
err_put_clks:
@@ -292,6 +300,7 @@ static int ohci_platform_remove(struct platform_device *dev)
struct ohci_platform_priv *priv = hcd_to_ohci_priv(hcd);
int clk, rst;
+ pm_runtime_get_sync(&dev->dev);
usb_remove_hcd(hcd);
if (pdata->power_off)
@@ -305,6 +314,9 @@ static int ohci_platform_remove(struct platform_device *dev)
usb_put_hcd(hcd);
+ pm_runtime_put_sync(&dev->dev);
+ pm_runtime_disable(&dev->dev);
+
if (pdata == &ohci_platform_defaults)
dev->dev.platform_data = NULL;
@@ -350,6 +362,7 @@ static int ohci_platform_resume(struct device *dev)
static const struct of_device_id ohci_platform_ids[] = {
{ .compatible = "generic-ohci", },
{ .compatible = "cavium,octeon-6335-ohci", },
+ { .compatible = "ti,ohci-omap3", },
{ }
};
MODULE_DEVICE_TABLE(of, ohci_platform_ids);
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index 94b1501..c3267a7 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -265,9 +265,13 @@ static void configure_hc(struct uhci_hcd *uhci)
static int resume_detect_interrupts_are_broken(struct uhci_hcd *uhci)
{
- /* If we have to ignore overcurrent events then almost by definition
- * we can't depend on resume-detect interrupts. */
- if (ignore_oc)
+ /*
+ * If we have to ignore overcurrent events then almost by definition
+ * we can't depend on resume-detect interrupts.
+ *
+ * Those interrupts also don't seem to work on ASpeed SoCs.
+ */
+ if (ignore_oc || uhci_is_aspeed(uhci))
return 1;
return uhci->resume_detect_interrupts_are_broken ?
@@ -384,6 +388,13 @@ static void start_rh(struct uhci_hcd *uhci)
{
uhci->is_stopped = 0;
+ /*
+ * Clear stale status bits on Aspeed as we get a stale HCH
+ * which causes problems later on
+ */
+ if (uhci_is_aspeed(uhci))
+ uhci_writew(uhci, uhci_readw(uhci, USBSTS), USBSTS);
+
/* Mark it configured and running with a 64-byte max packet.
* All interrupts are enabled, even though RESUME won't do anything.
*/
diff --git a/drivers/usb/host/uhci-hcd.h b/drivers/usb/host/uhci-hcd.h
index 7fa318a..91b22b2 100644
--- a/drivers/usb/host/uhci-hcd.h
+++ b/drivers/usb/host/uhci-hcd.h
@@ -48,6 +48,8 @@
/* USB port status and control registers */
#define USBPORTSC1 16
#define USBPORTSC2 18
+#define USBPORTSC3 20
+#define USBPORTSC4 22
#define USBPORTSC_CCS 0x0001 /* Current Connect Status
* ("device present") */
#define USBPORTSC_CSC 0x0002 /* Connect Status Change */
@@ -427,6 +429,7 @@ struct uhci_hcd {
unsigned int wait_for_hp:1; /* Wait for HP port reset */
unsigned int big_endian_mmio:1; /* Big endian registers */
unsigned int big_endian_desc:1; /* Big endian descriptors */
+ unsigned int is_aspeed:1; /* Aspeed impl. workarounds */
/* Support for port suspend/resume/reset */
unsigned long port_c_suspend; /* Bit-arrays of ports */
@@ -490,6 +493,12 @@ struct urb_priv {
#define PCI_VENDOR_ID_GENESYS 0x17a0
#define PCI_DEVICE_ID_GL880S_UHCI 0x8083
+/* Aspeed SoC needs some quirks */
+static inline bool uhci_is_aspeed(const struct uhci_hcd *uhci)
+{
+ return IS_ENABLED(CONFIG_USB_UHCI_ASPEED) && uhci->is_aspeed;
+}
+
/*
* Functions used to access controller registers. The UCHI spec says that host
* controller I/O registers are mapped into PCI I/O space. For non-PCI hosts
@@ -545,10 +554,42 @@ static inline void uhci_writeb(const struct uhci_hcd *uhci, u8 val, int reg)
#define uhci_big_endian_mmio(u) 0
#endif
+static inline int uhci_aspeed_reg(unsigned int reg)
+{
+ switch (reg) {
+ case USBCMD:
+ return 00;
+ case USBSTS:
+ return 0x04;
+ case USBINTR:
+ return 0x08;
+ case USBFRNUM:
+ return 0x80;
+ case USBFLBASEADD:
+ return 0x0c;
+ case USBSOF:
+ return 0x84;
+ case USBPORTSC1:
+ return 0x88;
+ case USBPORTSC2:
+ return 0x8c;
+ case USBPORTSC3:
+ return 0x90;
+ case USBPORTSC4:
+ return 0x94;
+ default:
+ pr_warn("UHCI: Unsupported register 0x%02x on Aspeed\n", reg);
+ /* Return an unimplemented register */
+ return 0x10;
+ }
+}
+
static inline u32 uhci_readl(const struct uhci_hcd *uhci, int reg)
{
if (uhci_has_pci_registers(uhci))
return inl(uhci->io_addr + reg);
+ else if (uhci_is_aspeed(uhci))
+ return readl(uhci->regs + uhci_aspeed_reg(reg));
#ifdef CONFIG_USB_UHCI_BIG_ENDIAN_MMIO
else if (uhci_big_endian_mmio(uhci))
return readl_be(uhci->regs + reg);
@@ -561,6 +602,8 @@ static inline void uhci_writel(const struct uhci_hcd *uhci, u32 val, int reg)
{
if (uhci_has_pci_registers(uhci))
outl(val, uhci->io_addr + reg);
+ else if (uhci_is_aspeed(uhci))
+ writel(val, uhci->regs + uhci_aspeed_reg(reg));
#ifdef CONFIG_USB_UHCI_BIG_ENDIAN_MMIO
else if (uhci_big_endian_mmio(uhci))
writel_be(val, uhci->regs + reg);
@@ -573,6 +616,8 @@ static inline u16 uhci_readw(const struct uhci_hcd *uhci, int reg)
{
if (uhci_has_pci_registers(uhci))
return inw(uhci->io_addr + reg);
+ else if (uhci_is_aspeed(uhci))
+ return readl(uhci->regs + uhci_aspeed_reg(reg));
#ifdef CONFIG_USB_UHCI_BIG_ENDIAN_MMIO
else if (uhci_big_endian_mmio(uhci))
return readw_be(uhci->regs + reg);
@@ -585,6 +630,8 @@ static inline void uhci_writew(const struct uhci_hcd *uhci, u16 val, int reg)
{
if (uhci_has_pci_registers(uhci))
outw(val, uhci->io_addr + reg);
+ else if (uhci_is_aspeed(uhci))
+ writel(val, uhci->regs + uhci_aspeed_reg(reg));
#ifdef CONFIG_USB_UHCI_BIG_ENDIAN_MMIO
else if (uhci_big_endian_mmio(uhci))
writew_be(val, uhci->regs + reg);
@@ -597,6 +644,8 @@ static inline u8 uhci_readb(const struct uhci_hcd *uhci, int reg)
{
if (uhci_has_pci_registers(uhci))
return inb(uhci->io_addr + reg);
+ else if (uhci_is_aspeed(uhci))
+ return readl(uhci->regs + uhci_aspeed_reg(reg));
#ifdef CONFIG_USB_UHCI_BIG_ENDIAN_MMIO
else if (uhci_big_endian_mmio(uhci))
return readb_be(uhci->regs + reg);
@@ -609,6 +658,8 @@ static inline void uhci_writeb(const struct uhci_hcd *uhci, u8 val, int reg)
{
if (uhci_has_pci_registers(uhci))
outb(val, uhci->io_addr + reg);
+ else if (uhci_is_aspeed(uhci))
+ writel(val, uhci->regs + uhci_aspeed_reg(reg));
#ifdef CONFIG_USB_UHCI_BIG_ENDIAN_MMIO
else if (uhci_big_endian_mmio(uhci))
writeb_be(val, uhci->regs + reg);
diff --git a/drivers/usb/host/uhci-platform.c b/drivers/usb/host/uhci-platform.c
index 32a6f3d..1b4e086 100644
--- a/drivers/usb/host/uhci-platform.c
+++ b/drivers/usb/host/uhci-platform.c
@@ -15,7 +15,9 @@ static int uhci_platform_init(struct usb_hcd *hcd)
{
struct uhci_hcd *uhci = hcd_to_uhci(hcd);
- uhci->rh_numports = uhci_count_ports(hcd);
+ /* Probe number of ports if not already provided by DT */
+ if (!uhci->rh_numports)
+ uhci->rh_numports = uhci_count_ports(hcd);
/* Set up pointers to to generic functions */
uhci->reset_hc = uhci_generic_reset_hc;
@@ -63,6 +65,7 @@ static const struct hc_driver uhci_platform_hc_driver = {
static int uhci_hcd_platform_probe(struct platform_device *pdev)
{
+ struct device_node *np = pdev->dev.of_node;
struct usb_hcd *hcd;
struct uhci_hcd *uhci;
struct resource *res;
@@ -98,6 +101,23 @@ static int uhci_hcd_platform_probe(struct platform_device *pdev)
uhci->regs = hcd->regs;
+ /* Grab some things from the device-tree */
+ if (np) {
+ u32 num_ports;
+
+ if (of_property_read_u32(np, "#ports", &num_ports) == 0) {
+ uhci->rh_numports = num_ports;
+ dev_info(&pdev->dev,
+ "Detected %d ports from device-tree\n",
+ num_ports);
+ }
+ if (of_device_is_compatible(np, "aspeed,ast2400-uhci") ||
+ of_device_is_compatible(np, "aspeed,ast2500-uhci")) {
+ uhci->is_aspeed = 1;
+ dev_info(&pdev->dev,
+ "Enabled Aspeed implementation workarounds\n");
+ }
+ }
ret = usb_add_hcd(hcd, pdev->resource[1].start, IRQF_SHARED);
if (ret)
goto err_rmr;
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index fddf273..2a82c92 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -407,64 +407,17 @@ static struct xhci_ring *xhci_ring_alloc(struct xhci_hcd *xhci,
return NULL;
}
-void xhci_free_or_cache_endpoint_ring(struct xhci_hcd *xhci,
+void xhci_free_endpoint_ring(struct xhci_hcd *xhci,
struct xhci_virt_device *virt_dev,
unsigned int ep_index)
{
- int rings_cached;
-
- rings_cached = virt_dev->num_rings_cached;
- if (rings_cached < XHCI_MAX_RINGS_CACHED) {
- virt_dev->ring_cache[rings_cached] =
- virt_dev->eps[ep_index].ring;
- virt_dev->num_rings_cached++;
- xhci_dbg(xhci, "Cached old ring, "
- "%d ring%s cached\n",
- virt_dev->num_rings_cached,
- (virt_dev->num_rings_cached > 1) ? "s" : "");
- } else {
- xhci_ring_free(xhci, virt_dev->eps[ep_index].ring);
- xhci_dbg(xhci, "Ring cache full (%d rings), "
- "freeing ring\n",
- virt_dev->num_rings_cached);
- }
+ xhci_ring_free(xhci, virt_dev->eps[ep_index].ring);
virt_dev->eps[ep_index].ring = NULL;
}
-/* Zero an endpoint ring (except for link TRBs) and move the enqueue and dequeue
- * pointers to the beginning of the ring.
- */
-static void xhci_reinit_cached_ring(struct xhci_hcd *xhci,
- struct xhci_ring *ring, unsigned int cycle_state,
- enum xhci_ring_type type)
-{
- struct xhci_segment *seg = ring->first_seg;
- int i;
-
- do {
- memset(seg->trbs, 0,
- sizeof(union xhci_trb)*TRBS_PER_SEGMENT);
- if (cycle_state == 0) {
- for (i = 0; i < TRBS_PER_SEGMENT; i++)
- seg->trbs[i].link.control |=
- cpu_to_le32(TRB_CYCLE);
- }
- /* All endpoint rings have link TRBs */
- xhci_link_segments(xhci, seg, seg->next, type);
- seg = seg->next;
- } while (seg != ring->first_seg);
- ring->type = type;
- xhci_initialize_ring_info(ring, cycle_state);
- /* td list should be empty since all URBs have been cancelled,
- * but just in case...
- */
- INIT_LIST_HEAD(&ring->td_list);
-}
-
/*
* Expand an existing ring.
- * Look for a cached ring or allocate a new ring which has same segment numbers
- * and link the two rings.
+ * Allocate a new ring which has same segment numbers and link the two rings.
*/
int xhci_ring_expansion(struct xhci_hcd *xhci, struct xhci_ring *ring,
unsigned int num_trbs, gfp_t flags)
@@ -968,12 +921,6 @@ void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id)
/* If necessary, update the number of active TTs on this root port */
xhci_update_tt_active_eps(xhci, dev, old_active_eps);
- if (dev->ring_cache) {
- for (i = 0; i < dev->num_rings_cached; i++)
- xhci_ring_free(xhci, dev->ring_cache[i]);
- kfree(dev->ring_cache);
- }
-
if (dev->in_ctx)
xhci_free_container_ctx(xhci, dev->in_ctx);
if (dev->out_ctx)
@@ -1062,14 +1009,6 @@ int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id,
if (!dev->eps[0].ring)
goto fail;
- /* Allocate pointers to the ring cache */
- dev->ring_cache = kzalloc(
- sizeof(struct xhci_ring *)*XHCI_MAX_RINGS_CACHED,
- flags);
- if (!dev->ring_cache)
- goto fail;
- dev->num_rings_cached = 0;
-
dev->udev = udev;
/* Point to output device context in dcbaa. */
@@ -1537,17 +1476,9 @@ int xhci_endpoint_init(struct xhci_hcd *xhci,
/* Set up the endpoint ring */
virt_dev->eps[ep_index].new_ring =
xhci_ring_alloc(xhci, 2, 1, ring_type, max_packet, mem_flags);
- if (!virt_dev->eps[ep_index].new_ring) {
- /* Attempt to use the ring cache */
- if (virt_dev->num_rings_cached == 0)
- return -ENOMEM;
- virt_dev->num_rings_cached--;
- virt_dev->eps[ep_index].new_ring =
- virt_dev->ring_cache[virt_dev->num_rings_cached];
- virt_dev->ring_cache[virt_dev->num_rings_cached] = NULL;
- xhci_reinit_cached_ring(xhci, virt_dev->eps[ep_index].new_ring,
- 1, ring_type);
- }
+ if (!virt_dev->eps[ep_index].new_ring)
+ return -ENOMEM;
+
virt_dev->eps[ep_index].skip = false;
ep_ring = virt_dev->eps[ep_index].new_ring;
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 03f63f5..c50c902 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -480,10 +480,34 @@ struct xhci_ring *xhci_triad_to_transfer_ring(struct xhci_hcd *xhci,
return NULL;
}
+
+/*
+ * Get the hw dequeue pointer xHC stopped on, either directly from the
+ * endpoint context, or if streams are in use from the stream context.
+ * The returned hw_dequeue contains the lowest four bits with cycle state
+ * and possbile stream context type.
+ */
+static u64 xhci_get_hw_deq(struct xhci_hcd *xhci, struct xhci_virt_device *vdev,
+ unsigned int ep_index, unsigned int stream_id)
+{
+ struct xhci_ep_ctx *ep_ctx;
+ struct xhci_stream_ctx *st_ctx;
+ struct xhci_virt_ep *ep;
+
+ ep = &vdev->eps[ep_index];
+
+ if (ep->ep_state & EP_HAS_STREAMS) {
+ st_ctx = &ep->stream_info->stream_ctx_array[stream_id];
+ return le64_to_cpu(st_ctx->stream_ring);
+ }
+ ep_ctx = xhci_get_ep_ctx(xhci, vdev->out_ctx, ep_index);
+ return le64_to_cpu(ep_ctx->deq);
+}
+
/*
* Move the xHC's endpoint ring dequeue pointer past cur_td.
* Record the new state of the xHC's endpoint ring dequeue segment,
- * dequeue pointer, and new consumer cycle state in state.
+ * dequeue pointer, stream id, and new consumer cycle state in state.
* Update our internal representation of the ring's dequeue pointer.
*
* We do this in three jumps:
@@ -521,24 +545,15 @@ void xhci_find_new_dequeue_state(struct xhci_hcd *xhci,
stream_id);
return;
}
-
/* Dig out the cycle state saved by the xHC during the stop ep cmd */
xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
"Finding endpoint context");
- /* 4.6.9 the css flag is written to the stream context for streams */
- if (ep->ep_state & EP_HAS_STREAMS) {
- struct xhci_stream_ctx *ctx =
- &ep->stream_info->stream_ctx_array[stream_id];
- hw_dequeue = le64_to_cpu(ctx->stream_ring);
- } else {
- struct xhci_ep_ctx *ep_ctx
- = xhci_get_ep_ctx(xhci, dev->out_ctx, ep_index);
- hw_dequeue = le64_to_cpu(ep_ctx->deq);
- }
+ hw_dequeue = xhci_get_hw_deq(xhci, dev, ep_index, stream_id);
new_seg = ep_ring->deq_seg;
new_deq = ep_ring->dequeue;
state->new_cycle_state = hw_dequeue & 0x1;
+ state->stream_id = stream_id;
/*
* We want to find the pointer, segment and cycle state of the new trb
@@ -691,7 +706,7 @@ static void xhci_handle_cmd_stop_ep(struct xhci_hcd *xhci, int slot_id,
struct xhci_td *last_unlinked_td;
struct xhci_ep_ctx *ep_ctx;
struct xhci_virt_device *vdev;
-
+ u64 hw_deq;
struct xhci_dequeue_state deq_state;
if (unlikely(TRB_TO_SUSPEND_PORT(le32_to_cpu(trb->generic.field[3])))) {
@@ -715,7 +730,6 @@ static void xhci_handle_cmd_stop_ep(struct xhci_hcd *xhci, int slot_id,
if (list_empty(&ep->cancelled_td_list)) {
xhci_stop_watchdog_timer_in_irq(xhci, ep);
- ep->stopped_td = NULL;
ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
return;
}
@@ -753,12 +767,19 @@ static void xhci_handle_cmd_stop_ep(struct xhci_hcd *xhci, int slot_id,
* If we stopped on the TD we need to cancel, then we have to
* move the xHC endpoint ring dequeue pointer past this TD.
*/
- if (cur_td == ep->stopped_td)
+ hw_deq = xhci_get_hw_deq(xhci, vdev, ep_index,
+ cur_td->urb->stream_id);
+ hw_deq &= ~0xf;
+
+ if (trb_in_td(xhci, cur_td->start_seg, cur_td->first_trb,
+ cur_td->last_trb, hw_deq, false)) {
xhci_find_new_dequeue_state(xhci, slot_id, ep_index,
- cur_td->urb->stream_id,
- cur_td, &deq_state);
- else
+ cur_td->urb->stream_id,
+ cur_td, &deq_state);
+ } else {
td_to_noop(xhci, ep_ring, cur_td, false);
+ }
+
remove_finished_td:
/*
* The event handler won't see a completion for this TD anymore,
@@ -773,15 +794,13 @@ static void xhci_handle_cmd_stop_ep(struct xhci_hcd *xhci, int slot_id,
/* If necessary, queue a Set Transfer Ring Dequeue Pointer command */
if (deq_state.new_deq_ptr && deq_state.new_deq_seg) {
xhci_queue_new_dequeue_state(xhci, slot_id, ep_index,
- ep->stopped_td->urb->stream_id, &deq_state);
+ &deq_state);
xhci_ring_cmd_db(xhci);
} else {
/* Otherwise ring the doorbell(s) to restart queued transfers */
ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
}
- ep->stopped_td = NULL;
-
/*
* Drop the lock and complete the URBs in the cancelled TD list.
* New TDs to be cancelled might be added to the end of the list before
@@ -1800,7 +1819,8 @@ struct xhci_segment *trb_in_td(struct xhci_hcd *xhci,
static void xhci_cleanup_halted_endpoint(struct xhci_hcd *xhci,
unsigned int slot_id, unsigned int ep_index,
unsigned int stream_id,
- struct xhci_td *td, union xhci_trb *ep_trb)
+ struct xhci_td *td, union xhci_trb *ep_trb,
+ enum xhci_ep_reset_type reset_type)
{
struct xhci_virt_ep *ep = &xhci->devs[slot_id]->eps[ep_index];
struct xhci_command *command;
@@ -1809,12 +1829,11 @@ static void xhci_cleanup_halted_endpoint(struct xhci_hcd *xhci,
return;
ep->ep_state |= EP_HALTED;
- ep->stopped_stream = stream_id;
- xhci_queue_reset_ep(xhci, command, slot_id, ep_index);
- xhci_cleanup_stalled_ring(xhci, ep_index, td);
+ xhci_queue_reset_ep(xhci, command, slot_id, ep_index, reset_type);
- ep->stopped_stream = 0;
+ if (reset_type == EP_HARD_RESET)
+ xhci_cleanup_stalled_ring(xhci, ep_index, stream_id, td);
xhci_ring_cmd_db(xhci);
}
@@ -1909,7 +1928,7 @@ static int xhci_td_cleanup(struct xhci_hcd *xhci, struct xhci_td *td,
static int finish_td(struct xhci_hcd *xhci, struct xhci_td *td,
union xhci_trb *ep_trb, struct xhci_transfer_event *event,
- struct xhci_virt_ep *ep, int *status, bool skip)
+ struct xhci_virt_ep *ep, int *status)
{
struct xhci_virt_device *xdev;
struct xhci_ep_ctx *ep_ctx;
@@ -1925,9 +1944,6 @@ static int finish_td(struct xhci_hcd *xhci, struct xhci_td *td,
ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index);
trb_comp_code = GET_COMP_CODE(le32_to_cpu(event->transfer_len));
- if (skip)
- goto td_cleanup;
-
if (trb_comp_code == COMP_STOPPED_LENGTH_INVALID ||
trb_comp_code == COMP_STOPPED ||
trb_comp_code == COMP_STOPPED_SHORT_PACKET) {
@@ -1935,7 +1951,6 @@ static int finish_td(struct xhci_hcd *xhci, struct xhci_td *td,
* stopped TDs. A stopped TD may be restarted, so don't update
* the ring dequeue pointer or take this TD off any lists yet.
*/
- ep->stopped_td = td;
return 0;
}
if (trb_comp_code == COMP_STALL_ERROR ||
@@ -1947,7 +1962,8 @@ static int finish_td(struct xhci_hcd *xhci, struct xhci_td *td,
* The class driver clears the device side halt later.
*/
xhci_cleanup_halted_endpoint(xhci, slot_id, ep_index,
- ep_ring->stream_id, td, ep_trb);
+ ep_ring->stream_id, td, ep_trb,
+ EP_HARD_RESET);
} else {
/* Update ring dequeue pointer */
while (ep_ring->dequeue != td->last_trb)
@@ -1955,7 +1971,6 @@ static int finish_td(struct xhci_hcd *xhci, struct xhci_td *td,
inc_deq(xhci, ep_ring);
}
-td_cleanup:
return xhci_td_cleanup(xhci, td, ep_ring, status);
}
@@ -2075,7 +2090,7 @@ static int process_ctrl_td(struct xhci_hcd *xhci, struct xhci_td *td,
td->urb->actual_length = requested;
finish_td:
- return finish_td(xhci, td, ep_trb, event, ep, status, false);
+ return finish_td(xhci, td, ep_trb, event, ep, status);
}
/*
@@ -2162,7 +2177,7 @@ static int process_isoc_td(struct xhci_hcd *xhci, struct xhci_td *td,
td->urb->actual_length += frame->actual_length;
- return finish_td(xhci, td, ep_trb, event, ep, status, false);
+ return finish_td(xhci, td, ep_trb, event, ep, status);
}
static int skip_isoc_td(struct xhci_hcd *xhci, struct xhci_td *td,
@@ -2190,7 +2205,7 @@ static int skip_isoc_td(struct xhci_hcd *xhci, struct xhci_td *td,
inc_deq(xhci, ep_ring);
inc_deq(xhci, ep_ring);
- return finish_td(xhci, td, NULL, event, ep, status, true);
+ return xhci_td_cleanup(xhci, td, ep_ring, status);
}
/*
@@ -2252,7 +2267,7 @@ static int process_bulk_intr_td(struct xhci_hcd *xhci, struct xhci_td *td,
remaining);
td->urb->actual_length = 0;
}
- return finish_td(xhci, td, ep_trb, event, ep, status, false);
+ return finish_td(xhci, td, ep_trb, event, ep, status);
}
/*
@@ -2280,39 +2295,46 @@ static int handle_tx_event(struct xhci_hcd *xhci,
bool handling_skipped_tds = false;
slot_id = TRB_TO_SLOT_ID(le32_to_cpu(event->flags));
+ ep_index = TRB_TO_EP_ID(le32_to_cpu(event->flags)) - 1;
+ trb_comp_code = GET_COMP_CODE(le32_to_cpu(event->transfer_len));
+ ep_trb_dma = le64_to_cpu(event->buffer);
+
xdev = xhci->devs[slot_id];
if (!xdev) {
xhci_err(xhci, "ERROR Transfer event pointed to bad slot %u\n",
slot_id);
- xhci_err(xhci, "@%016llx %08x %08x %08x %08x\n",
- (unsigned long long) xhci_trb_virt_to_dma(
- xhci->event_ring->deq_seg,
- xhci->event_ring->dequeue),
- lower_32_bits(le64_to_cpu(event->buffer)),
- upper_32_bits(le64_to_cpu(event->buffer)),
- le32_to_cpu(event->transfer_len),
- le32_to_cpu(event->flags));
- return -ENODEV;
+ goto err_out;
}
- /* Endpoint ID is 1 based, our index is zero based */
- ep_index = TRB_TO_EP_ID(le32_to_cpu(event->flags)) - 1;
ep = &xdev->eps[ep_index];
- ep_ring = xhci_dma_to_transfer_ring(ep, le64_to_cpu(event->buffer));
+ ep_ring = xhci_dma_to_transfer_ring(ep, ep_trb_dma);
ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index);
- if (!ep_ring || GET_EP_CTX_STATE(ep_ctx) == EP_STATE_DISABLED) {
+
+ if (GET_EP_CTX_STATE(ep_ctx) == EP_STATE_DISABLED) {
xhci_err(xhci,
- "ERROR Transfer event for disabled endpoint slot %u ep %u or incorrect stream ring\n",
+ "ERROR Transfer event for disabled endpoint slot %u ep %u\n",
slot_id, ep_index);
- xhci_err(xhci, "@%016llx %08x %08x %08x %08x\n",
- (unsigned long long) xhci_trb_virt_to_dma(
- xhci->event_ring->deq_seg,
- xhci->event_ring->dequeue),
- lower_32_bits(le64_to_cpu(event->buffer)),
- upper_32_bits(le64_to_cpu(event->buffer)),
- le32_to_cpu(event->transfer_len),
- le32_to_cpu(event->flags));
- return -ENODEV;
+ goto err_out;
+ }
+
+ /* Some transfer events don't always point to a trb, see xhci 4.17.4 */
+ if (!ep_ring) {
+ switch (trb_comp_code) {
+ case COMP_STALL_ERROR:
+ case COMP_USB_TRANSACTION_ERROR:
+ case COMP_INVALID_STREAM_TYPE_ERROR:
+ case COMP_INVALID_STREAM_ID_ERROR:
+ xhci_cleanup_halted_endpoint(xhci, slot_id, ep_index, 0,
+ NULL, NULL, EP_SOFT_RESET);
+ goto cleanup;
+ case COMP_RING_UNDERRUN:
+ case COMP_RING_OVERRUN:
+ goto cleanup;
+ default:
+ xhci_err(xhci, "ERROR Transfer event for unknown stream ring slot %u ep %u\n",
+ slot_id, ep_index);
+ goto err_out;
+ }
}
/* Count current td numbers if ep->skip is set */
@@ -2321,8 +2343,6 @@ static int handle_tx_event(struct xhci_hcd *xhci,
td_num++;
}
- ep_trb_dma = le64_to_cpu(event->buffer);
- trb_comp_code = GET_COMP_CODE(le32_to_cpu(event->transfer_len));
/* Look for common error cases */
switch (trb_comp_code) {
/* Skip codes that require special handling depending on
@@ -2339,6 +2359,7 @@ static int handle_tx_event(struct xhci_hcd *xhci,
slot_id, ep_index);
case COMP_SHORT_PACKET:
break;
+ /* Completion codes for endpoint stopped state */
case COMP_STOPPED:
xhci_dbg(xhci, "Stopped on Transfer TRB for slot %u ep %u\n",
slot_id, ep_index);
@@ -2353,18 +2374,13 @@ static int handle_tx_event(struct xhci_hcd *xhci,
"Stopped with short packet transfer detected for slot %u ep %u\n",
slot_id, ep_index);
break;
+ /* Completion codes for endpoint halted state */
case COMP_STALL_ERROR:
xhci_dbg(xhci, "Stalled endpoint for slot %u ep %u\n", slot_id,
ep_index);
ep->ep_state |= EP_HALTED;
status = -EPIPE;
break;
- case COMP_TRB_ERROR:
- xhci_warn(xhci,
- "WARN: TRB error for slot %u ep %u on endpoint\n",
- slot_id, ep_index);
- status = -EILSEQ;
- break;
case COMP_SPLIT_TRANSACTION_ERROR:
case COMP_USB_TRANSACTION_ERROR:
xhci_dbg(xhci, "Transfer error for slot %u ep %u on endpoint\n",
@@ -2376,6 +2392,14 @@ static int handle_tx_event(struct xhci_hcd *xhci,
slot_id, ep_index);
status = -EOVERFLOW;
break;
+ /* Completion codes for endpoint error state */
+ case COMP_TRB_ERROR:
+ xhci_warn(xhci,
+ "WARN: TRB error for slot %u ep %u on endpoint\n",
+ slot_id, ep_index);
+ status = -EILSEQ;
+ break;
+ /* completion codes not indicating endpoint state change */
case COMP_DATA_BUFFER_ERROR:
xhci_warn(xhci,
"WARN: HC couldn't access mem fast enough for slot %u ep %u\n",
@@ -2413,12 +2437,6 @@ static int handle_tx_event(struct xhci_hcd *xhci,
TRB_TO_SLOT_ID(le32_to_cpu(event->flags)),
ep_index);
goto cleanup;
- case COMP_INCOMPATIBLE_DEVICE_ERROR:
- xhci_warn(xhci,
- "WARN: detect an incompatible device for slot %u ep %u",
- slot_id, ep_index);
- status = -EPROTO;
- break;
case COMP_MISSED_SERVICE_ERROR:
/*
* When encounter missed service error, one or more isoc tds
@@ -2437,6 +2455,14 @@ static int handle_tx_event(struct xhci_hcd *xhci,
"No Ping response error for slot %u ep %u, Skip one Isoc TD\n",
slot_id, ep_index);
goto cleanup;
+
+ case COMP_INCOMPATIBLE_DEVICE_ERROR:
+ /* needs disable slot command to recover */
+ xhci_warn(xhci,
+ "WARN: detect an incompatible device for slot %u ep %u",
+ slot_id, ep_index);
+ status = -EPROTO;
+ break;
default:
if (xhci_is_vendor_info_code(xhci, trb_comp_code)) {
status = 0;
@@ -2589,6 +2615,17 @@ static int handle_tx_event(struct xhci_hcd *xhci,
} while (handling_skipped_tds);
return 0;
+
+err_out:
+ xhci_err(xhci, "@%016llx %08x %08x %08x %08x\n",
+ (unsigned long long) xhci_trb_virt_to_dma(
+ xhci->event_ring->deq_seg,
+ xhci->event_ring->dequeue),
+ lower_32_bits(le64_to_cpu(event->buffer)),
+ upper_32_bits(le64_to_cpu(event->buffer)),
+ le32_to_cpu(event->transfer_len),
+ le32_to_cpu(event->flags));
+ return -ENODEV;
}
/*
@@ -3963,13 +4000,12 @@ int xhci_queue_stop_endpoint(struct xhci_hcd *xhci, struct xhci_command *cmd,
/* Set Transfer Ring Dequeue Pointer command */
void xhci_queue_new_dequeue_state(struct xhci_hcd *xhci,
unsigned int slot_id, unsigned int ep_index,
- unsigned int stream_id,
struct xhci_dequeue_state *deq_state)
{
dma_addr_t addr;
u32 trb_slot_id = SLOT_ID_FOR_TRB(slot_id);
u32 trb_ep_index = EP_ID_FOR_TRB(ep_index);
- u32 trb_stream_id = STREAM_ID_FOR_TRB(stream_id);
+ u32 trb_stream_id = STREAM_ID_FOR_TRB(deq_state->stream_id);
u32 trb_sct = 0;
u32 type = TRB_TYPE(TRB_SET_DEQ);
struct xhci_virt_ep *ep;
@@ -4007,7 +4043,7 @@ void xhci_queue_new_dequeue_state(struct xhci_hcd *xhci,
ep->queued_deq_seg = deq_state->new_deq_seg;
ep->queued_deq_ptr = deq_state->new_deq_ptr;
- if (stream_id)
+ if (deq_state->stream_id)
trb_sct = SCT_FOR_TRB(SCT_PRI_TR);
ret = queue_command(xhci, cmd,
lower_32_bits(addr) | trb_sct | deq_state->new_cycle_state,
@@ -4027,12 +4063,16 @@ void xhci_queue_new_dequeue_state(struct xhci_hcd *xhci,
}
int xhci_queue_reset_ep(struct xhci_hcd *xhci, struct xhci_command *cmd,
- int slot_id, unsigned int ep_index)
+ int slot_id, unsigned int ep_index,
+ enum xhci_ep_reset_type reset_type)
{
u32 trb_slot_id = SLOT_ID_FOR_TRB(slot_id);
u32 trb_ep_index = EP_ID_FOR_TRB(ep_index);
u32 type = TRB_TYPE(TRB_RESET_EP);
+ if (reset_type == EP_SOFT_RESET)
+ type |= TRB_TSP;
+
return queue_command(xhci, cmd, 0, 0, 0,
trb_slot_id | trb_ep_index | type, false);
}
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 30f47d9..56f85df 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -1695,8 +1695,7 @@ static int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
if (xhci->quirks & XHCI_MTK_HOST) {
ret = xhci_mtk_add_ep_quirk(hcd, udev, ep);
if (ret < 0) {
- xhci_free_or_cache_endpoint_ring(xhci,
- virt_dev, ep_index);
+ xhci_free_endpoint_ring(xhci, virt_dev, ep_index);
return ret;
}
}
@@ -2720,23 +2719,23 @@ static int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
for (i = 1; i < 31; i++) {
if ((le32_to_cpu(ctrl_ctx->drop_flags) & (1 << (i + 1))) &&
!(le32_to_cpu(ctrl_ctx->add_flags) & (1 << (i + 1)))) {
- xhci_free_or_cache_endpoint_ring(xhci, virt_dev, i);
+ xhci_free_endpoint_ring(xhci, virt_dev, i);
xhci_check_bw_drop_ep_streams(xhci, virt_dev, i);
}
}
xhci_zero_in_ctx(xhci, virt_dev);
/*
* Install any rings for completely new endpoints or changed endpoints,
- * and free or cache any old rings from changed endpoints.
+ * and free any old rings from changed endpoints.
*/
for (i = 1; i < 31; i++) {
if (!virt_dev->eps[i].new_ring)
continue;
- /* Only cache or free the old ring if it exists.
+ /* Only free the old ring if it exists.
* It may not if this is the first add of an endpoint.
*/
if (virt_dev->eps[i].ring) {
- xhci_free_or_cache_endpoint_ring(xhci, virt_dev, i);
+ xhci_free_endpoint_ring(xhci, virt_dev, i);
}
xhci_check_bw_drop_ep_streams(xhci, virt_dev, i);
virt_dev->eps[i].ring = virt_dev->eps[i].new_ring;
@@ -2823,8 +2822,8 @@ static void xhci_setup_input_ctx_for_quirk(struct xhci_hcd *xhci,
added_ctxs, added_ctxs);
}
-void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci,
- unsigned int ep_index, struct xhci_td *td)
+void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci, unsigned int ep_index,
+ unsigned int stream_id, struct xhci_td *td)
{
struct xhci_dequeue_state deq_state;
struct xhci_virt_ep *ep;
@@ -2837,7 +2836,7 @@ void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci,
* or it will attempt to resend it on the next doorbell ring.
*/
xhci_find_new_dequeue_state(xhci, udev->slot_id,
- ep_index, ep->stopped_stream, td, &deq_state);
+ ep_index, stream_id, td, &deq_state);
if (!deq_state.new_deq_ptr || !deq_state.new_deq_seg)
return;
@@ -2849,7 +2848,7 @@ void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci,
xhci_dbg_trace(xhci, trace_xhci_dbg_reset_ep,
"Queueing new dequeue state");
xhci_queue_new_dequeue_state(xhci, udev->slot_id,
- ep_index, ep->stopped_stream, &deq_state);
+ ep_index, &deq_state);
} else {
/* Better hope no one uses the input context between now and the
* reset endpoint completion!
@@ -3336,7 +3335,7 @@ void xhci_free_device_endpoint_resources(struct xhci_hcd *xhci,
*
* Wait for the Reset Device command to finish. Remove all structures
* associated with the endpoints that were disabled. Clear the input device
- * structure? Cache the rings? Reset the control endpoint 0 max packet size?
+ * structure? Reset the control endpoint 0 max packet size?
*
* If the virt_dev to be reset does not exist or does not match the udev,
* it means the device is lost, possibly due to the xHC restore error and
@@ -3466,7 +3465,7 @@ static int xhci_discover_or_reset_device(struct usb_hcd *hcd,
spin_unlock_irqrestore(&xhci->lock, flags);
}
- /* Everything but endpoint 0 is disabled, so free or cache the rings. */
+ /* Everything but endpoint 0 is disabled, so free the rings. */
last_freed_endpoint = 1;
for (i = 1; i < 31; i++) {
struct xhci_virt_ep *ep = &virt_dev->eps[i];
@@ -3480,7 +3479,7 @@ static int xhci_discover_or_reset_device(struct usb_hcd *hcd,
}
if (ep->ring) {
- xhci_free_or_cache_endpoint_ring(xhci, virt_dev, i);
+ xhci_free_endpoint_ring(xhci, virt_dev, i);
last_freed_endpoint = i;
}
if (!list_empty(&virt_dev->eps[i].bw_endpoint_list))
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 73a28a9..650a2d9d 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -924,8 +924,6 @@ struct xhci_virt_ep {
#define EP_GETTING_NO_STREAMS (1 << 5)
/* ---- Related to URB cancellation ---- */
struct list_head cancelled_td_list;
- struct xhci_td *stopped_td;
- unsigned int stopped_stream;
/* Watchdog timer for stop endpoint command to cancel URBs */
struct timer_list stop_cmd_timer;
struct xhci_hcd *xhci;
@@ -993,10 +991,6 @@ struct xhci_virt_device {
struct xhci_container_ctx *out_ctx;
/* Used for addressing devices and configuration changes */
struct xhci_container_ctx *in_ctx;
- /* Rings saved to ensure old alt settings can be re-instated */
- struct xhci_ring **ring_cache;
- int num_rings_cached;
-#define XHCI_MAX_RINGS_CACHED 31
struct xhci_virt_ep eps[31];
u8 fake_port;
u8 real_port;
@@ -1210,6 +1204,11 @@ struct xhci_event_cmd {
/* Stop Ring - Transfer State Preserve */
#define TRB_TSP (1<<9)
+enum xhci_ep_reset_type {
+ EP_HARD_RESET,
+ EP_SOFT_RESET,
+};
+
/* Force Event */
#define TRB_TO_VF_INTR_TARGET(p) (((p) & (0x3ff << 22)) >> 22)
#define TRB_TO_VF_ID(p) (((p) & (0xff << 16)) >> 16)
@@ -1527,6 +1526,7 @@ struct xhci_dequeue_state {
struct xhci_segment *new_deq_seg;
union xhci_trb *new_deq_ptr;
int new_cycle_state;
+ unsigned int stream_id;
};
enum xhci_ring_type {
@@ -1960,7 +1960,7 @@ int xhci_endpoint_init(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev,
void xhci_ring_free(struct xhci_hcd *xhci, struct xhci_ring *ring);
int xhci_ring_expansion(struct xhci_hcd *xhci, struct xhci_ring *ring,
unsigned int num_trbs, gfp_t flags);
-void xhci_free_or_cache_endpoint_ring(struct xhci_hcd *xhci,
+void xhci_free_endpoint_ring(struct xhci_hcd *xhci,
struct xhci_virt_device *virt_dev,
unsigned int ep_index);
struct xhci_stream_info *xhci_alloc_stream_info(struct xhci_hcd *xhci,
@@ -2044,7 +2044,8 @@ int xhci_queue_configure_endpoint(struct xhci_hcd *xhci,
int xhci_queue_evaluate_context(struct xhci_hcd *xhci, struct xhci_command *cmd,
dma_addr_t in_ctx_ptr, u32 slot_id, bool command_must_succeed);
int xhci_queue_reset_ep(struct xhci_hcd *xhci, struct xhci_command *cmd,
- int slot_id, unsigned int ep_index);
+ int slot_id, unsigned int ep_index,
+ enum xhci_ep_reset_type reset_type);
int xhci_queue_reset_device(struct xhci_hcd *xhci, struct xhci_command *cmd,
u32 slot_id);
void xhci_find_new_dequeue_state(struct xhci_hcd *xhci,
@@ -2053,10 +2054,9 @@ void xhci_find_new_dequeue_state(struct xhci_hcd *xhci,
struct xhci_dequeue_state *state);
void xhci_queue_new_dequeue_state(struct xhci_hcd *xhci,
unsigned int slot_id, unsigned int ep_index,
- unsigned int stream_id,
struct xhci_dequeue_state *deq_state);
-void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci,
- unsigned int ep_index, struct xhci_td *td);
+void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci, unsigned int ep_index,
+ unsigned int stream_id, struct xhci_td *td);
void xhci_stop_endpoint_command_watchdog(unsigned long arg);
void xhci_handle_command_timeout(struct work_struct *work);
diff --git a/drivers/usb/misc/iowarrior.c b/drivers/usb/misc/iowarrior.c
index 83b05a2..7ca4c7e 100644
--- a/drivers/usb/misc/iowarrior.c
+++ b/drivers/usb/misc/iowarrior.c
@@ -368,14 +368,9 @@ static ssize_t iowarrior_write(struct file *file,
case USB_DEVICE_ID_CODEMERCS_IOWPV2:
case USB_DEVICE_ID_CODEMERCS_IOW40:
/* IOW24 and IOW40 use a synchronous call */
- buf = kmalloc(count, GFP_KERNEL);
- if (!buf) {
- retval = -ENOMEM;
- goto exit;
- }
- if (copy_from_user(buf, user_buffer, count)) {
- retval = -EFAULT;
- kfree(buf);
+ buf = memdup_user(user_buffer, count);
+ if (IS_ERR(buf)) {
+ retval = PTR_ERR(buf);
goto exit;
}
retval = usb_set_report(dev->interface, 2, 0, buf, count);
diff --git a/drivers/usb/misc/usbsevseg.c b/drivers/usb/misc/usbsevseg.c
index a0ba529..388fae6 100644
--- a/drivers/usb/misc/usbsevseg.c
+++ b/drivers/usb/misc/usbsevseg.c
@@ -33,7 +33,7 @@ static const struct usb_device_id id_table[] = {
MODULE_DEVICE_TABLE(usb, id_table);
/* the different text display modes the device is capable of */
-static char *display_textmodes[] = {"raw", "hex", "ascii", NULL};
+static const char *display_textmodes[] = {"raw", "hex", "ascii"};
struct usb_sevsegdev {
struct usb_device *udev;
@@ -280,7 +280,7 @@ static ssize_t show_attr_textmode(struct device *dev,
buf[0] = 0;
- for (i = 0; display_textmodes[i]; i++) {
+ for (i = 0; i < ARRAY_SIZE(display_textmodes); i++) {
if (mydev->textmode == i) {
strcat(buf, " [");
strcat(buf, display_textmodes[i]);
@@ -304,15 +304,13 @@ static ssize_t set_attr_textmode(struct device *dev,
struct usb_sevsegdev *mydev = usb_get_intfdata(intf);
int i;
- for (i = 0; display_textmodes[i]; i++) {
- if (sysfs_streq(display_textmodes[i], buf)) {
- mydev->textmode = i;
- update_display_visual(mydev, GFP_KERNEL);
- return count;
- }
- }
+ i = sysfs_match_string(display_textmodes, buf);
+ if (i < 0)
+ return i;
- return -EINVAL;
+ mydev->textmode = i;
+ update_display_visual(mydev, GFP_KERNEL);
+ return count;
}
static DEVICE_ATTR(textmode, S_IRUGO | S_IWUSR, show_attr_textmode, set_attr_textmode);
diff --git a/drivers/usb/mtu3/mtu3.h b/drivers/usb/mtu3/mtu3.h
index aa6fd6a..7b6dc23 100644
--- a/drivers/usb/mtu3/mtu3.h
+++ b/drivers/usb/mtu3/mtu3.h
@@ -356,12 +356,8 @@ static inline struct mtu3_ep *to_mtu3_ep(struct usb_ep *ep)
static inline struct mtu3_request *next_request(struct mtu3_ep *mep)
{
- struct list_head *queue = &mep->req_list;
-
- if (list_empty(queue))
- return NULL;
-
- return list_first_entry(queue, struct mtu3_request, list);
+ return list_first_entry_or_null(&mep->req_list, struct mtu3_request,
+ list);
}
static inline void mtu3_writel(void __iomem *base, u32 offset, u32 data)
diff --git a/drivers/usb/mtu3/mtu3_plat.c b/drivers/usb/mtu3/mtu3_plat.c
index 42550c7..0d3ebb3 100644
--- a/drivers/usb/mtu3/mtu3_plat.c
+++ b/drivers/usb/mtu3/mtu3_plat.c
@@ -458,6 +458,7 @@ static int __maybe_unused mtu3_resume(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct ssusb_mtk *ssusb = platform_get_drvdata(pdev);
+ int ret;
dev_dbg(dev, "%s\n", __func__);
@@ -465,12 +466,28 @@ static int __maybe_unused mtu3_resume(struct device *dev)
return 0;
ssusb_wakeup_disable(ssusb);
- clk_prepare_enable(ssusb->sys_clk);
- clk_prepare_enable(ssusb->ref_clk);
- ssusb_phy_power_on(ssusb);
+ ret = clk_prepare_enable(ssusb->sys_clk);
+ if (ret)
+ goto err_sys_clk;
+
+ ret = clk_prepare_enable(ssusb->ref_clk);
+ if (ret)
+ goto err_ref_clk;
+
+ ret = ssusb_phy_power_on(ssusb);
+ if (ret)
+ goto err_power_on;
+
ssusb_host_enable(ssusb);
return 0;
+
+err_power_on:
+ clk_disable_unprepare(ssusb->ref_clk);
+err_ref_clk:
+ clk_disable_unprepare(ssusb->sys_clk);
+err_sys_clk:
+ return ret;
}
static const struct dev_pm_ops mtu3_pm_ops = {
diff --git a/drivers/usb/storage/ene_ub6250.c b/drivers/usb/storage/ene_ub6250.c
index 44af719..2810037 100644
--- a/drivers/usb/storage/ene_ub6250.c
+++ b/drivers/usb/storage/ene_ub6250.c
@@ -95,12 +95,12 @@ static struct us_unusual_dev ene_ub6250_unusual_dev_list[] = {
#define REG_HW_TRAP1 0xFF89
/* SRB Status */
-#define SS_SUCCESS 0x00 /* No Sense */
-#define SS_NOT_READY 0x02
-#define SS_MEDIUM_ERR 0x03
-#define SS_HW_ERR 0x04
-#define SS_ILLEGAL_REQUEST 0x05
-#define SS_UNIT_ATTENTION 0x06
+#define SS_SUCCESS 0x000000 /* No Sense */
+#define SS_NOT_READY 0x023A00 /* Medium not present */
+#define SS_MEDIUM_ERR 0x031100 /* Unrecovered read error */
+#define SS_HW_ERR 0x040800 /* Communication failure */
+#define SS_ILLEGAL_REQUEST 0x052000 /* Invalid command */
+#define SS_UNIT_ATTENTION 0x062900 /* Reset occurred */
/* ENE Load FW Pattern */
#define SD_INIT1_PATTERN 1
@@ -584,6 +584,34 @@ static int ene_send_scsi_cmd(struct us_data *us, u8 fDir, void *buf, int use_sg)
return USB_STOR_TRANSPORT_GOOD;
}
+static int do_scsi_request_sense(struct us_data *us, struct scsi_cmnd *srb)
+{
+ struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
+ unsigned char buf[18];
+
+ memset(buf, 0, 18);
+ buf[0] = 0x70; /* Current error */
+ buf[2] = info->SrbStatus >> 16; /* Sense key */
+ buf[7] = 10; /* Additional length */
+ buf[12] = info->SrbStatus >> 8; /* ASC */
+ buf[13] = info->SrbStatus; /* ASCQ */
+
+ usb_stor_set_xfer_buf(buf, sizeof(buf), srb);
+ return USB_STOR_TRANSPORT_GOOD;
+}
+
+static int do_scsi_inquiry(struct us_data *us, struct scsi_cmnd *srb)
+{
+ unsigned char data_ptr[36] = {
+ 0x00, 0x00, 0x02, 0x00, 0x1F, 0x00, 0x00, 0x00, 0x55,
+ 0x53, 0x42, 0x32, 0x2E, 0x30, 0x20, 0x20, 0x43, 0x61,
+ 0x72, 0x64, 0x52, 0x65, 0x61, 0x64, 0x65, 0x72, 0x20,
+ 0x20, 0x20, 0x20, 0x20, 0x20, 0x30, 0x31, 0x30, 0x30 };
+
+ usb_stor_set_xfer_buf(data_ptr, 36, srb);
+ return USB_STOR_TRANSPORT_GOOD;
+}
+
static int sd_scsi_test_unit_ready(struct us_data *us, struct scsi_cmnd *srb)
{
struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
@@ -598,18 +626,6 @@ static int sd_scsi_test_unit_ready(struct us_data *us, struct scsi_cmnd *srb)
return USB_STOR_TRANSPORT_GOOD;
}
-static int sd_scsi_inquiry(struct us_data *us, struct scsi_cmnd *srb)
-{
- unsigned char data_ptr[36] = {
- 0x00, 0x80, 0x02, 0x00, 0x1F, 0x00, 0x00, 0x00, 0x55,
- 0x53, 0x42, 0x32, 0x2E, 0x30, 0x20, 0x20, 0x43, 0x61,
- 0x72, 0x64, 0x52, 0x65, 0x61, 0x64, 0x65, 0x72, 0x20,
- 0x20, 0x20, 0x20, 0x20, 0x20, 0x30, 0x31, 0x30, 0x30 };
-
- usb_stor_set_xfer_buf(data_ptr, 36, srb);
- return USB_STOR_TRANSPORT_GOOD;
-}
-
static int sd_scsi_mode_sense(struct us_data *us, struct scsi_cmnd *srb)
{
struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
@@ -1455,19 +1471,6 @@ static int ms_scsi_test_unit_ready(struct us_data *us, struct scsi_cmnd *srb)
return USB_STOR_TRANSPORT_GOOD;
}
-static int ms_scsi_inquiry(struct us_data *us, struct scsi_cmnd *srb)
-{
- /* pr_info("MS_SCSI_Inquiry\n"); */
- unsigned char data_ptr[36] = {
- 0x00, 0x80, 0x02, 0x00, 0x1F, 0x00, 0x00, 0x00, 0x55,
- 0x53, 0x42, 0x32, 0x2E, 0x30, 0x20, 0x20, 0x43, 0x61,
- 0x72, 0x64, 0x52, 0x65, 0x61, 0x64, 0x65, 0x72, 0x20,
- 0x20, 0x20, 0x20, 0x20, 0x20, 0x30, 0x31, 0x30, 0x30};
-
- usb_stor_set_xfer_buf(data_ptr, 36, srb);
- return USB_STOR_TRANSPORT_GOOD;
-}
-
static int ms_scsi_mode_sense(struct us_data *us, struct scsi_cmnd *srb)
{
struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
@@ -1940,6 +1943,8 @@ static int ene_load_bincode(struct us_data *us, unsigned char flag)
bcb->CDB[0] = 0xEF;
result = ene_send_scsi_cmd(us, FDIR_WRITE, buf, 0);
+ if (us->srb != NULL)
+ scsi_set_resid(us->srb, 0);
info->BIN_FLAG = flag;
kfree(buf);
@@ -2223,13 +2228,15 @@ static int sd_scsi_irp(struct us_data *us, struct scsi_cmnd *srb)
int result;
struct ene_ub6250_info *info = (struct ene_ub6250_info *)us->extra;
- info->SrbStatus = SS_SUCCESS;
switch (srb->cmnd[0]) {
case TEST_UNIT_READY:
result = sd_scsi_test_unit_ready(us, srb);
break; /* 0x00 */
+ case REQUEST_SENSE:
+ result = do_scsi_request_sense(us, srb);
+ break; /* 0x03 */
case INQUIRY:
- result = sd_scsi_inquiry(us, srb);
+ result = do_scsi_inquiry(us, srb);
break; /* 0x12 */
case MODE_SENSE:
result = sd_scsi_mode_sense(us, srb);
@@ -2253,6 +2260,8 @@ static int sd_scsi_irp(struct us_data *us, struct scsi_cmnd *srb)
result = USB_STOR_TRANSPORT_FAILED;
break;
}
+ if (result == USB_STOR_TRANSPORT_GOOD)
+ info->SrbStatus = SS_SUCCESS;
return result;
}
@@ -2263,13 +2272,16 @@ static int ms_scsi_irp(struct us_data *us, struct scsi_cmnd *srb)
{
int result;
struct ene_ub6250_info *info = (struct ene_ub6250_info *)us->extra;
- info->SrbStatus = SS_SUCCESS;
+
switch (srb->cmnd[0]) {
case TEST_UNIT_READY:
result = ms_scsi_test_unit_ready(us, srb);
break; /* 0x00 */
+ case REQUEST_SENSE:
+ result = do_scsi_request_sense(us, srb);
+ break; /* 0x03 */
case INQUIRY:
- result = ms_scsi_inquiry(us, srb);
+ result = do_scsi_inquiry(us, srb);
break; /* 0x12 */
case MODE_SENSE:
result = ms_scsi_mode_sense(us, srb);
@@ -2288,26 +2300,29 @@ static int ms_scsi_irp(struct us_data *us, struct scsi_cmnd *srb)
result = USB_STOR_TRANSPORT_FAILED;
break;
}
+ if (result == USB_STOR_TRANSPORT_GOOD)
+ info->SrbStatus = SS_SUCCESS;
return result;
}
static int ene_transport(struct scsi_cmnd *srb, struct us_data *us)
{
- int result = 0;
+ int result = USB_STOR_XFER_GOOD;
struct ene_ub6250_info *info = (struct ene_ub6250_info *)(us->extra);
/*US_DEBUG(usb_stor_show_command(us, srb)); */
scsi_set_resid(srb, 0);
- if (unlikely(!(info->SD_Status.Ready || info->MS_Status.Ready))) {
+ if (unlikely(!(info->SD_Status.Ready || info->MS_Status.Ready)))
result = ene_init(us);
- } else {
+ if (result == USB_STOR_XFER_GOOD) {
+ result = USB_STOR_TRANSPORT_ERROR;
if (info->SD_Status.Ready)
result = sd_scsi_irp(us, srb);
if (info->MS_Status.Ready)
result = ms_scsi_irp(us, srb);
}
- return 0;
+ return result;
}
static struct scsi_host_template ene_ub6250_host_template;
diff --git a/drivers/usb/typec/typec.c b/drivers/usb/typec/typec.c
index 89e540b..24e355b 100644
--- a/drivers/usb/typec/typec.c
+++ b/drivers/usb/typec/typec.c
@@ -11,6 +11,7 @@
#include <linux/device.h>
#include <linux/module.h>
+#include <linux/mutex.h>
#include <linux/slab.h>
#include <linux/usb/typec.h>
@@ -69,6 +70,8 @@ struct typec_port {
enum typec_role pwr_role;
enum typec_role vconn_role;
enum typec_pwr_opmode pwr_opmode;
+ enum typec_port_type port_type;
+ struct mutex port_type_lock;
const struct typec_capability *cap;
};
@@ -291,7 +294,7 @@ typec_altmode_roles_show(struct device *dev, struct device_attribute *attr,
}
static void typec_init_modes(struct typec_altmode *alt,
- struct typec_mode_desc *desc, bool is_port)
+ const struct typec_mode_desc *desc, bool is_port)
{
int i;
@@ -378,7 +381,8 @@ static const struct device_type typec_altmode_dev_type = {
};
static struct typec_altmode *
-typec_register_altmode(struct device *parent, struct typec_altmode_desc *desc)
+typec_register_altmode(struct device *parent,
+ const struct typec_altmode_desc *desc)
{
struct typec_altmode *alt;
int ret;
@@ -495,7 +499,7 @@ EXPORT_SYMBOL_GPL(typec_partner_set_identity);
*/
struct typec_altmode *
typec_partner_register_altmode(struct typec_partner *partner,
- struct typec_altmode_desc *desc)
+ const struct typec_altmode_desc *desc)
{
return typec_register_altmode(&partner->dev, desc);
}
@@ -590,7 +594,7 @@ static const struct device_type typec_plug_dev_type = {
*/
struct typec_altmode *
typec_plug_register_altmode(struct typec_plug *plug,
- struct typec_altmode_desc *desc)
+ const struct typec_altmode_desc *desc)
{
return typec_register_altmode(&plug->dev, desc);
}
@@ -789,6 +793,18 @@ static const char * const typec_data_roles[] = {
[TYPEC_HOST] = "host",
};
+static const char * const typec_port_types[] = {
+ [TYPEC_PORT_DFP] = "source",
+ [TYPEC_PORT_UFP] = "sink",
+ [TYPEC_PORT_DRP] = "dual",
+};
+
+static const char * const typec_port_types_drp[] = {
+ [TYPEC_PORT_DFP] = "dual [source] sink",
+ [TYPEC_PORT_UFP] = "dual source [sink]",
+ [TYPEC_PORT_DRP] = "[dual] source sink",
+};
+
static ssize_t
preferred_role_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t size)
@@ -846,11 +862,6 @@ static ssize_t data_role_store(struct device *dev,
struct typec_port *port = to_typec_port(dev);
int ret;
- if (port->cap->type != TYPEC_PORT_DRP) {
- dev_dbg(dev, "data role swap only supported with DRP ports\n");
- return -EOPNOTSUPP;
- }
-
if (!port->cap->dr_set) {
dev_dbg(dev, "data role swapping not supported\n");
return -EOPNOTSUPP;
@@ -860,11 +871,22 @@ static ssize_t data_role_store(struct device *dev,
if (ret < 0)
return ret;
+ mutex_lock(&port->port_type_lock);
+ if (port->port_type != TYPEC_PORT_DRP) {
+ dev_dbg(dev, "port type fixed at \"%s\"",
+ typec_port_types[port->port_type]);
+ ret = -EOPNOTSUPP;
+ goto unlock_and_ret;
+ }
+
ret = port->cap->dr_set(port->cap, ret);
if (ret)
- return ret;
+ goto unlock_and_ret;
- return size;
+ ret = size;
+unlock_and_ret:
+ mutex_unlock(&port->port_type_lock);
+ return ret;
}
static ssize_t data_role_show(struct device *dev,
@@ -885,7 +907,7 @@ static ssize_t power_role_store(struct device *dev,
const char *buf, size_t size)
{
struct typec_port *port = to_typec_port(dev);
- int ret = size;
+ int ret;
if (!port->cap->pd_revision) {
dev_dbg(dev, "USB Power Delivery not supported\n");
@@ -906,11 +928,22 @@ static ssize_t power_role_store(struct device *dev,
if (ret < 0)
return ret;
+ mutex_lock(&port->port_type_lock);
+ if (port->port_type != TYPEC_PORT_DRP) {
+ dev_dbg(dev, "port type fixed at \"%s\"",
+ typec_port_types[port->port_type]);
+ ret = -EOPNOTSUPP;
+ goto unlock_and_ret;
+ }
+
ret = port->cap->pr_set(port->cap, ret);
if (ret)
- return ret;
+ goto unlock_and_ret;
- return size;
+ ret = size;
+unlock_and_ret:
+ mutex_unlock(&port->port_type_lock);
+ return ret;
}
static ssize_t power_role_show(struct device *dev,
@@ -926,6 +959,57 @@ static ssize_t power_role_show(struct device *dev,
}
static DEVICE_ATTR_RW(power_role);
+static ssize_t
+port_type_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t size)
+{
+ struct typec_port *port = to_typec_port(dev);
+ int ret;
+ enum typec_port_type type;
+
+ if (!port->cap->port_type_set || port->cap->type != TYPEC_PORT_DRP) {
+ dev_dbg(dev, "changing port type not supported\n");
+ return -EOPNOTSUPP;
+ }
+
+ ret = sysfs_match_string(typec_port_types, buf);
+ if (ret < 0)
+ return ret;
+
+ type = ret;
+ mutex_lock(&port->port_type_lock);
+
+ if (port->port_type == type) {
+ ret = size;
+ goto unlock_and_ret;
+ }
+
+ ret = port->cap->port_type_set(port->cap, type);
+ if (ret)
+ goto unlock_and_ret;
+
+ port->port_type = type;
+ ret = size;
+
+unlock_and_ret:
+ mutex_unlock(&port->port_type_lock);
+ return ret;
+}
+
+static ssize_t
+port_type_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct typec_port *port = to_typec_port(dev);
+
+ if (port->cap->type == TYPEC_PORT_DRP)
+ return sprintf(buf, "%s\n",
+ typec_port_types_drp[port->port_type]);
+
+ return sprintf(buf, "[%s]\n", typec_port_types[port->cap->type]);
+}
+static DEVICE_ATTR_RW(port_type);
+
static const char * const typec_pwr_opmodes[] = {
[TYPEC_PWR_MODE_USB] = "default",
[TYPEC_PWR_MODE_1_5A] = "1.5A",
@@ -1035,6 +1119,7 @@ static struct attribute *typec_attrs[] = {
&dev_attr_usb_power_delivery_revision.attr,
&dev_attr_usb_typec_revision.attr,
&dev_attr_vconn_source.attr,
+ &dev_attr_port_type.attr,
NULL,
};
ATTRIBUTE_GROUPS(typec);
@@ -1123,6 +1208,11 @@ void typec_set_vconn_role(struct typec_port *port, enum typec_role role)
}
EXPORT_SYMBOL_GPL(typec_set_vconn_role);
+static int partner_match(struct device *dev, void *data)
+{
+ return is_typec_partner(dev);
+}
+
/**
* typec_set_pwr_opmode - Report changed power operation mode
* @port: The USB Type-C Port where the mode was changed
@@ -1136,12 +1226,26 @@ EXPORT_SYMBOL_GPL(typec_set_vconn_role);
void typec_set_pwr_opmode(struct typec_port *port,
enum typec_pwr_opmode opmode)
{
+ struct device *partner_dev;
+
if (port->pwr_opmode == opmode)
return;
port->pwr_opmode = opmode;
sysfs_notify(&port->dev.kobj, NULL, "power_operation_mode");
kobject_uevent(&port->dev.kobj, KOBJ_CHANGE);
+
+ partner_dev = device_find_child(&port->dev, NULL, partner_match);
+ if (partner_dev) {
+ struct typec_partner *partner = to_typec_partner(partner_dev);
+
+ if (opmode == TYPEC_PWR_MODE_PD && !partner->usb_pd) {
+ partner->usb_pd = 1;
+ sysfs_notify(&partner_dev->kobj, NULL,
+ "supports_usb_power_delivery");
+ }
+ put_device(partner_dev);
+ }
}
EXPORT_SYMBOL_GPL(typec_set_pwr_opmode);
@@ -1159,7 +1263,7 @@ EXPORT_SYMBOL_GPL(typec_set_pwr_opmode);
*/
struct typec_altmode *
typec_port_register_altmode(struct typec_port *port,
- struct typec_altmode_desc *desc)
+ const struct typec_altmode_desc *desc)
{
return typec_register_altmode(&port->dev, desc);
}
@@ -1211,6 +1315,8 @@ struct typec_port *typec_register_port(struct device *parent,
port->id = id;
port->cap = cap;
+ port->port_type = cap->type;
+ mutex_init(&port->port_type_lock);
port->prefer_role = cap->prefer_role;
port->dev.class = typec_class;
diff --git a/drivers/usb/usbip/stub_main.c b/drivers/usb/usbip/stub_main.c
index 44ab43f..af10f7b 100644
--- a/drivers/usb/usbip/stub_main.c
+++ b/drivers/usb/usbip/stub_main.c
@@ -262,7 +262,11 @@ void stub_device_cleanup_urbs(struct stub_device *sdev)
kmem_cache_free(stub_priv_cache, priv);
kfree(urb->transfer_buffer);
+ urb->transfer_buffer = NULL;
+
kfree(urb->setup_packet);
+ urb->setup_packet = NULL;
+
usb_free_urb(urb);
}
}
diff --git a/drivers/usb/usbip/stub_tx.c b/drivers/usb/usbip/stub_tx.c
index 6b1e8c3f..be50cef 100644
--- a/drivers/usb/usbip/stub_tx.c
+++ b/drivers/usb/usbip/stub_tx.c
@@ -28,7 +28,11 @@ static void stub_free_priv_and_urb(struct stub_priv *priv)
struct urb *urb = priv->urb;
kfree(urb->setup_packet);
+ urb->setup_packet = NULL;
+
kfree(urb->transfer_buffer);
+ urb->transfer_buffer = NULL;
+
list_del(&priv->list);
kmem_cache_free(stub_priv_cache, priv);
usb_free_urb(urb);
diff --git a/drivers/usb/usbip/vhci.h b/drivers/usb/usbip/vhci.h
index 88b71c4..5cfb59e 100644
--- a/drivers/usb/usbip/vhci.h
+++ b/drivers/usb/usbip/vhci.h
@@ -72,6 +72,11 @@ struct vhci_unlink {
unsigned long unlink_seqnum;
};
+enum hub_speed {
+ HUB_SPEED_HIGH = 0,
+ HUB_SPEED_SUPER,
+};
+
/* Number of supported ports. Value has an upperbound of USB_MAXCHILDREN */
#ifdef CONFIG_USBIP_VHCI_HC_PORTS
#define VHCI_HC_PORTS CONFIG_USBIP_VHCI_HC_PORTS
@@ -79,6 +84,9 @@ struct vhci_unlink {
#define VHCI_HC_PORTS 8
#endif
+/* Each VHCI has 2 hubs (USB2 and USB3), each has VHCI_HC_PORTS ports */
+#define VHCI_PORTS (VHCI_HC_PORTS*2)
+
#ifdef CONFIG_USBIP_VHCI_NR_HCS
#define VHCI_NR_HCS CONFIG_USBIP_VHCI_NR_HCS
#else
@@ -87,10 +95,19 @@ struct vhci_unlink {
#define MAX_STATUS_NAME 16
-/* for usb_bus.hcpriv */
-struct vhci_hcd {
+struct vhci {
spinlock_t lock;
+ struct platform_device *pdev;
+
+ struct vhci_hcd *vhci_hcd_hs;
+ struct vhci_hcd *vhci_hcd_ss;
+};
+
+/* for usb_hcd.hcd_priv[0] */
+struct vhci_hcd {
+ struct vhci *vhci;
+
u32 port_status[VHCI_HC_PORTS];
unsigned resuming:1;
@@ -107,7 +124,7 @@ struct vhci_hcd {
};
extern int vhci_num_controllers;
-extern struct platform_device **vhci_pdevs;
+extern struct vhci *vhcis;
extern struct attribute_group vhci_attr_group;
/* vhci_hcd.c */
@@ -131,10 +148,10 @@ static inline __u32 port_to_rhport(__u32 port)
static inline int port_to_pdev_nr(__u32 port)
{
- return port / VHCI_HC_PORTS;
+ return port / VHCI_PORTS;
}
-static inline struct vhci_hcd *hcd_to_vhci(struct usb_hcd *hcd)
+static inline struct vhci_hcd *hcd_to_vhci_hcd(struct usb_hcd *hcd)
{
return (struct vhci_hcd *) (hcd->hcd_priv);
}
@@ -149,15 +166,14 @@ static inline const char *hcd_name(struct usb_hcd *hcd)
return (hcd)->self.bus_name;
}
-static inline struct usb_hcd *vhci_to_hcd(struct vhci_hcd *vhci)
+static inline struct usb_hcd *vhci_hcd_to_hcd(struct vhci_hcd *vhci_hcd)
{
- return container_of((void *) vhci, struct usb_hcd, hcd_priv);
+ return container_of((void *) vhci_hcd, struct usb_hcd, hcd_priv);
}
-static inline struct vhci_hcd *vdev_to_vhci(struct vhci_device *vdev)
+static inline struct vhci_hcd *vdev_to_vhci_hcd(struct vhci_device *vdev)
{
- return container_of(
- (void *)(vdev - vdev->rhport), struct vhci_hcd, vdev);
+ return container_of((void *)(vdev - vdev->rhport), struct vhci_hcd, vdev);
}
#endif /* __USBIP_VHCI_H */
diff --git a/drivers/usb/usbip/vhci_hcd.c b/drivers/usb/usbip/vhci_hcd.c
index 0585078..64c3860 100644
--- a/drivers/usb/usbip/vhci_hcd.c
+++ b/drivers/usb/usbip/vhci_hcd.c
@@ -58,8 +58,7 @@ static const char driver_name[] = "vhci_hcd";
static const char driver_desc[] = "USB/IP Virtual Host Controller";
int vhci_num_controllers = VHCI_NR_HCS;
-
-struct platform_device **vhci_pdevs;
+struct vhci *vhcis;
static const char * const bit_desc[] = {
"CONNECTION", /*0*/
@@ -67,7 +66,7 @@ static const char * const bit_desc[] = {
"SUSPEND", /*2*/
"OVER_CURRENT", /*3*/
"RESET", /*4*/
- "R5", /*5*/
+ "L1", /*5*/
"R6", /*6*/
"R7", /*7*/
"POWER", /*8*/
@@ -83,7 +82,7 @@ static const char * const bit_desc[] = {
"C_SUSPEND", /*18*/
"C_OVER_CURRENT", /*19*/
"C_RESET", /*20*/
- "R21", /*21*/
+ "C_L1", /*21*/
"R22", /*22*/
"R23", /*23*/
"R24", /*24*/
@@ -96,10 +95,49 @@ static const char * const bit_desc[] = {
"R31", /*31*/
};
-static void dump_port_status_diff(u32 prev_status, u32 new_status)
+static const char * const bit_desc_ss[] = {
+ "CONNECTION", /*0*/
+ "ENABLE", /*1*/
+ "SUSPEND", /*2*/
+ "OVER_CURRENT", /*3*/
+ "RESET", /*4*/
+ "L1", /*5*/
+ "R6", /*6*/
+ "R7", /*7*/
+ "R8", /*8*/
+ "POWER", /*9*/
+ "HIGHSPEED", /*10*/
+ "PORT_TEST", /*11*/
+ "INDICATOR", /*12*/
+ "R13", /*13*/
+ "R14", /*14*/
+ "R15", /*15*/
+ "C_CONNECTION", /*16*/
+ "C_ENABLE", /*17*/
+ "C_SUSPEND", /*18*/
+ "C_OVER_CURRENT", /*19*/
+ "C_RESET", /*20*/
+ "C_BH_RESET", /*21*/
+ "C_LINK_STATE", /*22*/
+ "C_CONFIG_ERROR", /*23*/
+ "R24", /*24*/
+ "R25", /*25*/
+ "R26", /*26*/
+ "R27", /*27*/
+ "R28", /*28*/
+ "R29", /*29*/
+ "R30", /*30*/
+ "R31", /*31*/
+};
+
+static void dump_port_status_diff(u32 prev_status, u32 new_status, bool usb3)
{
int i = 0;
u32 bit = 1;
+ const char * const *desc = bit_desc;
+
+ if (usb3)
+ desc = bit_desc_ss;
pr_debug("status prev -> new: %08x -> %08x\n", prev_status, new_status);
while (bit) {
@@ -114,8 +152,12 @@ static void dump_port_status_diff(u32 prev_status, u32 new_status)
else
change = ' ';
- if (prev || new)
- pr_debug(" %c%s\n", change, bit_desc[i]);
+ if (prev || new) {
+ pr_debug(" %c%s\n", change, desc[i]);
+
+ if (bit == 1) /* USB_PORT_STAT_CONNECTION */
+ pr_debug(" %c%s\n", change, "USB_PORT_STAT_SPEED_5GBPS");
+ }
bit <<= 1;
i++;
}
@@ -124,7 +166,8 @@ static void dump_port_status_diff(u32 prev_status, u32 new_status)
void rh_port_connect(struct vhci_device *vdev, enum usb_device_speed speed)
{
- struct vhci_hcd *vhci = vdev_to_vhci(vdev);
+ struct vhci_hcd *vhci_hcd = vdev_to_vhci_hcd(vdev);
+ struct vhci *vhci = vhci_hcd->vhci;
int rhport = vdev->rhport;
u32 status;
unsigned long flags;
@@ -133,7 +176,7 @@ void rh_port_connect(struct vhci_device *vdev, enum usb_device_speed speed)
spin_lock_irqsave(&vhci->lock, flags);
- status = vhci->port_status[rhport];
+ status = vhci_hcd->port_status[rhport];
status |= USB_PORT_STAT_CONNECTION | (1 << USB_PORT_FEAT_C_CONNECTION);
@@ -148,16 +191,17 @@ void rh_port_connect(struct vhci_device *vdev, enum usb_device_speed speed)
break;
}
- vhci->port_status[rhport] = status;
+ vhci_hcd->port_status[rhport] = status;
spin_unlock_irqrestore(&vhci->lock, flags);
- usb_hcd_poll_rh_status(vhci_to_hcd(vhci));
+ usb_hcd_poll_rh_status(vhci_hcd_to_hcd(vhci_hcd));
}
static void rh_port_disconnect(struct vhci_device *vdev)
{
- struct vhci_hcd *vhci = vdev_to_vhci(vdev);
+ struct vhci_hcd *vhci_hcd = vdev_to_vhci_hcd(vdev);
+ struct vhci *vhci = vhci_hcd->vhci;
int rhport = vdev->rhport;
u32 status;
unsigned long flags;
@@ -166,15 +210,15 @@ static void rh_port_disconnect(struct vhci_device *vdev)
spin_lock_irqsave(&vhci->lock, flags);
- status = vhci->port_status[rhport];
+ status = vhci_hcd->port_status[rhport];
status &= ~USB_PORT_STAT_CONNECTION;
status |= (1 << USB_PORT_FEAT_C_CONNECTION);
- vhci->port_status[rhport] = status;
+ vhci_hcd->port_status[rhport] = status;
spin_unlock_irqrestore(&vhci->lock, flags);
- usb_hcd_poll_rh_status(vhci_to_hcd(vhci));
+ usb_hcd_poll_rh_status(vhci_hcd_to_hcd(vhci_hcd));
}
#define PORT_C_MASK \
@@ -197,17 +241,15 @@ static void rh_port_disconnect(struct vhci_device *vdev)
*/
static int vhci_hub_status(struct usb_hcd *hcd, char *buf)
{
- struct vhci_hcd *vhci;
- int retval;
+ struct vhci_hcd *vhci_hcd = hcd_to_vhci_hcd(hcd);
+ struct vhci *vhci = vhci_hcd->vhci;
+ int retval = DIV_ROUND_UP(VHCI_HC_PORTS + 1, 8);
int rhport;
int changed = 0;
unsigned long flags;
- retval = DIV_ROUND_UP(VHCI_HC_PORTS + 1, 8);
memset(buf, 0, retval);
- vhci = hcd_to_vhci(hcd);
-
spin_lock_irqsave(&vhci->lock, flags);
if (!HCD_HW_ACCESSIBLE(hcd)) {
usbip_dbg_vhci_rh("hw accessible flag not on?\n");
@@ -216,7 +258,7 @@ static int vhci_hub_status(struct usb_hcd *hcd, char *buf)
/* check pseudo status register for each port */
for (rhport = 0; rhport < VHCI_HC_PORTS; rhport++) {
- if ((vhci->port_status[rhport] & PORT_C_MASK)) {
+ if ((vhci_hcd->port_status[rhport] & PORT_C_MASK)) {
/* The status of a port has been changed, */
usbip_dbg_vhci_rh("port %d status changed\n", rhport);
@@ -233,6 +275,40 @@ static int vhci_hub_status(struct usb_hcd *hcd, char *buf)
return changed ? retval : 0;
}
+/* usb 3.0 root hub device descriptor */
+static struct {
+ struct usb_bos_descriptor bos;
+ struct usb_ss_cap_descriptor ss_cap;
+} __packed usb3_bos_desc = {
+
+ .bos = {
+ .bLength = USB_DT_BOS_SIZE,
+ .bDescriptorType = USB_DT_BOS,
+ .wTotalLength = cpu_to_le16(sizeof(usb3_bos_desc)),
+ .bNumDeviceCaps = 1,
+ },
+ .ss_cap = {
+ .bLength = USB_DT_USB_SS_CAP_SIZE,
+ .bDescriptorType = USB_DT_DEVICE_CAPABILITY,
+ .bDevCapabilityType = USB_SS_CAP_TYPE,
+ .wSpeedSupported = cpu_to_le16(USB_5GBPS_OPERATION),
+ .bFunctionalitySupport = ilog2(USB_5GBPS_OPERATION),
+ },
+};
+
+static inline void
+ss_hub_descriptor(struct usb_hub_descriptor *desc)
+{
+ memset(desc, 0, sizeof *desc);
+ desc->bDescriptorType = USB_DT_SS_HUB;
+ desc->bDescLength = 12;
+ desc->wHubCharacteristics = cpu_to_le16(
+ HUB_CHAR_INDV_PORT_LPSM | HUB_CHAR_COMMON_OCPM);
+ desc->bNbrPorts = VHCI_HC_PORTS;
+ desc->u.ss.bHubHdrDecLat = 0x04; /* Worst case: 0.4 micro sec*/
+ desc->u.ss.DeviceRemovable = 0xffff;
+}
+
static inline void hub_descriptor(struct usb_hub_descriptor *desc)
{
int width;
@@ -253,7 +329,8 @@ static inline void hub_descriptor(struct usb_hub_descriptor *desc)
static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
u16 wIndex, char *buf, u16 wLength)
{
- struct vhci_hcd *dum;
+ struct vhci_hcd *vhci_hcd;
+ struct vhci *vhci;
int retval = 0;
int rhport;
unsigned long flags;
@@ -265,21 +342,24 @@ static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
/*
* NOTE:
- * wIndex shows the port number and begins from 1.
+ * wIndex (bits 0-7) shows the port number and begins from 1?
*/
+ wIndex = ((__u8)(wIndex & 0x00ff));
usbip_dbg_vhci_rh("typeReq %x wValue %x wIndex %x\n", typeReq, wValue,
wIndex);
+
if (wIndex > VHCI_HC_PORTS)
pr_err("invalid port number %d\n", wIndex);
- rhport = ((__u8)(wIndex & 0x00ff)) - 1;
+ rhport = wIndex - 1;
- dum = hcd_to_vhci(hcd);
+ vhci_hcd = hcd_to_vhci_hcd(hcd);
+ vhci = vhci_hcd->vhci;
- spin_lock_irqsave(&dum->lock, flags);
+ spin_lock_irqsave(&vhci->lock, flags);
/* store old status and compare now and old later */
if (usbip_dbg_flag_vhci_rh) {
- memcpy(prev_port_status, dum->port_status,
+ memcpy(prev_port_status, vhci_hcd->port_status,
sizeof(prev_port_status));
}
@@ -290,45 +370,56 @@ static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
case ClearPortFeature:
switch (wValue) {
case USB_PORT_FEAT_SUSPEND:
- if (dum->port_status[rhport] & USB_PORT_STAT_SUSPEND) {
+ if (hcd->speed == HCD_USB3) {
+ pr_err(" ClearPortFeature: USB_PORT_FEAT_SUSPEND req not "
+ "supported for USB 3.0 roothub\n");
+ goto error;
+ }
+ usbip_dbg_vhci_rh(
+ " ClearPortFeature: USB_PORT_FEAT_SUSPEND\n");
+ if (vhci_hcd->port_status[rhport] & USB_PORT_STAT_SUSPEND) {
/* 20msec signaling */
- dum->resuming = 1;
- dum->re_timeout =
- jiffies + msecs_to_jiffies(20);
+ vhci_hcd->resuming = 1;
+ vhci_hcd->re_timeout = jiffies + msecs_to_jiffies(20);
}
break;
case USB_PORT_FEAT_POWER:
usbip_dbg_vhci_rh(
" ClearPortFeature: USB_PORT_FEAT_POWER\n");
- dum->port_status[rhport] = 0;
- dum->resuming = 0;
- break;
- case USB_PORT_FEAT_C_RESET:
- usbip_dbg_vhci_rh(
- " ClearPortFeature: USB_PORT_FEAT_C_RESET\n");
- switch (dum->vdev[rhport].speed) {
- case USB_SPEED_HIGH:
- dum->port_status[rhport] |=
- USB_PORT_STAT_HIGH_SPEED;
- break;
- case USB_SPEED_LOW:
- dum->port_status[rhport] |=
- USB_PORT_STAT_LOW_SPEED;
- break;
- default:
- break;
- }
+ if (hcd->speed == HCD_USB3)
+ vhci_hcd->port_status[rhport] &= ~USB_SS_PORT_STAT_POWER;
+ else
+ vhci_hcd->port_status[rhport] &= ~USB_PORT_STAT_POWER;
break;
default:
usbip_dbg_vhci_rh(" ClearPortFeature: default %x\n",
wValue);
- dum->port_status[rhport] &= ~(1 << wValue);
+ vhci_hcd->port_status[rhport] &= ~(1 << wValue);
break;
}
break;
case GetHubDescriptor:
usbip_dbg_vhci_rh(" GetHubDescriptor\n");
- hub_descriptor((struct usb_hub_descriptor *) buf);
+ if (hcd->speed == HCD_USB3 &&
+ (wLength < USB_DT_SS_HUB_SIZE ||
+ wValue != (USB_DT_SS_HUB << 8))) {
+ pr_err("Wrong hub descriptor type for USB 3.0 roothub.\n");
+ goto error;
+ }
+ if (hcd->speed == HCD_USB3)
+ ss_hub_descriptor((struct usb_hub_descriptor *) buf);
+ else
+ hub_descriptor((struct usb_hub_descriptor *) buf);
+ break;
+ case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
+ if (hcd->speed != HCD_USB3)
+ goto error;
+
+ if ((wValue >> 8) != USB_DT_BOS)
+ goto error;
+
+ memcpy(buf, &usb3_bos_desc, sizeof(usb3_bos_desc));
+ retval = sizeof(usb3_bos_desc);
break;
case GetHubStatus:
usbip_dbg_vhci_rh(" GetHubStatus\n");
@@ -336,7 +427,7 @@ static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
break;
case GetPortStatus:
usbip_dbg_vhci_rh(" GetPortStatus port %x\n", wIndex);
- if (wIndex > VHCI_HC_PORTS || wIndex < 1) {
+ if (wIndex < 1) {
pr_err("invalid port number %d\n", wIndex);
retval = -EPIPE;
}
@@ -346,36 +437,48 @@ static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
/* whoever resets or resumes must GetPortStatus to
* complete it!!
*/
- if (dum->resuming && time_after(jiffies, dum->re_timeout)) {
- dum->port_status[rhport] |=
- (1 << USB_PORT_FEAT_C_SUSPEND);
- dum->port_status[rhport] &=
- ~(1 << USB_PORT_FEAT_SUSPEND);
- dum->resuming = 0;
- dum->re_timeout = 0;
+ if (vhci_hcd->resuming && time_after(jiffies, vhci_hcd->re_timeout)) {
+ vhci_hcd->port_status[rhport] |= (1 << USB_PORT_FEAT_C_SUSPEND);
+ vhci_hcd->port_status[rhport] &= ~(1 << USB_PORT_FEAT_SUSPEND);
+ vhci_hcd->resuming = 0;
+ vhci_hcd->re_timeout = 0;
}
- if ((dum->port_status[rhport] & (1 << USB_PORT_FEAT_RESET)) !=
- 0 && time_after(jiffies, dum->re_timeout)) {
- dum->port_status[rhport] |=
- (1 << USB_PORT_FEAT_C_RESET);
- dum->port_status[rhport] &=
- ~(1 << USB_PORT_FEAT_RESET);
- dum->re_timeout = 0;
+ if ((vhci_hcd->port_status[rhport] & (1 << USB_PORT_FEAT_RESET)) !=
+ 0 && time_after(jiffies, vhci_hcd->re_timeout)) {
+ vhci_hcd->port_status[rhport] |= (1 << USB_PORT_FEAT_C_RESET);
+ vhci_hcd->port_status[rhport] &= ~(1 << USB_PORT_FEAT_RESET);
+ vhci_hcd->re_timeout = 0;
- if (dum->vdev[rhport].ud.status ==
+ if (vhci_hcd->vdev[rhport].ud.status ==
VDEV_ST_NOTASSIGNED) {
usbip_dbg_vhci_rh(
" enable rhport %d (status %u)\n",
rhport,
- dum->vdev[rhport].ud.status);
- dum->port_status[rhport] |=
+ vhci_hcd->vdev[rhport].ud.status);
+ vhci_hcd->port_status[rhport] |=
USB_PORT_STAT_ENABLE;
}
+
+ if (hcd->speed < HCD_USB3) {
+ switch (vhci_hcd->vdev[rhport].speed) {
+ case USB_SPEED_HIGH:
+ vhci_hcd->port_status[rhport] |=
+ USB_PORT_STAT_HIGH_SPEED;
+ break;
+ case USB_SPEED_LOW:
+ vhci_hcd->port_status[rhport] |=
+ USB_PORT_STAT_LOW_SPEED;
+ break;
+ default:
+ pr_err("vhci_device speed not set\n");
+ break;
+ }
+ }
}
- ((__le16 *) buf)[0] = cpu_to_le16(dum->port_status[rhport]);
+ ((__le16 *) buf)[0] = cpu_to_le16(vhci_hcd->port_status[rhport]);
((__le16 *) buf)[1] =
- cpu_to_le16(dum->port_status[rhport] >> 16);
+ cpu_to_le16(vhci_hcd->port_status[rhport] >> 16);
usbip_dbg_vhci_rh(" GetPortStatus bye %x %x\n", ((u16 *)buf)[0],
((u16 *)buf)[1]);
@@ -386,36 +489,119 @@ static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
break;
case SetPortFeature:
switch (wValue) {
+ case USB_PORT_FEAT_LINK_STATE:
+ usbip_dbg_vhci_rh(
+ " SetPortFeature: USB_PORT_FEAT_LINK_STATE\n");
+ if (hcd->speed != HCD_USB3) {
+ pr_err("USB_PORT_FEAT_LINK_STATE req not "
+ "supported for USB 2.0 roothub\n");
+ goto error;
+ }
+ /*
+ * Since this is dummy we don't have an actual link so
+ * there is nothing to do for the SET_LINK_STATE cmd
+ */
+ break;
+ case USB_PORT_FEAT_U1_TIMEOUT:
+ usbip_dbg_vhci_rh(
+ " SetPortFeature: USB_PORT_FEAT_U1_TIMEOUT\n");
+ case USB_PORT_FEAT_U2_TIMEOUT:
+ usbip_dbg_vhci_rh(
+ " SetPortFeature: USB_PORT_FEAT_U2_TIMEOUT\n");
+ /* TODO: add suspend/resume support! */
+ if (hcd->speed != HCD_USB3) {
+ pr_err("USB_PORT_FEAT_U1/2_TIMEOUT req not "
+ "supported for USB 2.0 roothub\n");
+ goto error;
+ }
+ break;
case USB_PORT_FEAT_SUSPEND:
usbip_dbg_vhci_rh(
" SetPortFeature: USB_PORT_FEAT_SUSPEND\n");
+ /* Applicable only for USB2.0 hub */
+ if (hcd->speed == HCD_USB3) {
+ pr_err("USB_PORT_FEAT_SUSPEND req not "
+ "supported for USB 3.0 roothub\n");
+ goto error;
+ }
+
+ vhci_hcd->port_status[rhport] |= USB_PORT_STAT_SUSPEND;
break;
+ case USB_PORT_FEAT_POWER:
+ usbip_dbg_vhci_rh(
+ " SetPortFeature: USB_PORT_FEAT_POWER\n");
+ if (hcd->speed == HCD_USB3)
+ vhci_hcd->port_status[rhport] |= USB_SS_PORT_STAT_POWER;
+ else
+ vhci_hcd->port_status[rhport] |= USB_PORT_STAT_POWER;
+ break;
+ case USB_PORT_FEAT_BH_PORT_RESET:
+ usbip_dbg_vhci_rh(
+ " SetPortFeature: USB_PORT_FEAT_BH_PORT_RESET\n");
+ /* Applicable only for USB3.0 hub */
+ if (hcd->speed != HCD_USB3) {
+ pr_err("USB_PORT_FEAT_BH_PORT_RESET req not "
+ "supported for USB 2.0 roothub\n");
+ goto error;
+ }
+ /* FALLS THROUGH */
case USB_PORT_FEAT_RESET:
usbip_dbg_vhci_rh(
" SetPortFeature: USB_PORT_FEAT_RESET\n");
- /* if it's already running, disconnect first */
- if (dum->port_status[rhport] & USB_PORT_STAT_ENABLE) {
- dum->port_status[rhport] &=
- ~(USB_PORT_STAT_ENABLE |
- USB_PORT_STAT_LOW_SPEED |
- USB_PORT_STAT_HIGH_SPEED);
- /* FIXME test that code path! */
+ /* if it's already enabled, disable */
+ if (hcd->speed == HCD_USB3) {
+ vhci_hcd->port_status[rhport] = 0;
+ vhci_hcd->port_status[rhport] =
+ (USB_SS_PORT_STAT_POWER |
+ USB_PORT_STAT_CONNECTION |
+ USB_PORT_STAT_RESET);
+ } else if (vhci_hcd->port_status[rhport] & USB_PORT_STAT_ENABLE) {
+ vhci_hcd->port_status[rhport] &= ~(USB_PORT_STAT_ENABLE
+ | USB_PORT_STAT_LOW_SPEED
+ | USB_PORT_STAT_HIGH_SPEED);
}
- /* 50msec reset signaling */
- dum->re_timeout = jiffies + msecs_to_jiffies(50);
- /* FALLTHROUGH */
+ /* 50msec reset signaling */
+ vhci_hcd->re_timeout = jiffies + msecs_to_jiffies(50);
+
+ /* FALLS THROUGH */
default:
usbip_dbg_vhci_rh(" SetPortFeature: default %d\n",
wValue);
- dum->port_status[rhport] |= (1 << wValue);
- break;
+ if (hcd->speed == HCD_USB3) {
+ if ((vhci_hcd->port_status[rhport] &
+ USB_SS_PORT_STAT_POWER) != 0) {
+ vhci_hcd->port_status[rhport] |= (1 << wValue);
+ }
+ } else
+ if ((vhci_hcd->port_status[rhport] &
+ USB_PORT_STAT_POWER) != 0) {
+ vhci_hcd->port_status[rhport] |= (1 << wValue);
+ }
}
break;
-
+ case GetPortErrorCount:
+ usbip_dbg_vhci_rh(" GetPortErrorCount\n");
+ if (hcd->speed != HCD_USB3) {
+ pr_err("GetPortErrorCount req not "
+ "supported for USB 2.0 roothub\n");
+ goto error;
+ }
+ /* We'll always return 0 since this is a dummy hub */
+ *(__le32 *) buf = cpu_to_le32(0);
+ break;
+ case SetHubDepth:
+ usbip_dbg_vhci_rh(" SetHubDepth\n");
+ if (hcd->speed != HCD_USB3) {
+ pr_err("SetHubDepth req not supported for "
+ "USB 2.0 roothub\n");
+ goto error;
+ }
+ break;
default:
- pr_err("default: no such request\n");
-
+ pr_err("default hub control req: %04x v%04x i%04x l%d\n",
+ typeReq, wValue, wIndex, wLength);
+error:
/* "protocol stall" on error */
retval = -EPIPE;
}
@@ -425,12 +611,16 @@ static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
/* Only dump valid port status */
if (rhport >= 0) {
dump_port_status_diff(prev_port_status[rhport],
- dum->port_status[rhport]);
+ vhci_hcd->port_status[rhport],
+ hcd->speed == HCD_USB3);
}
}
usbip_dbg_vhci_rh(" bye\n");
- spin_unlock_irqrestore(&dum->lock, flags);
+ spin_unlock_irqrestore(&vhci->lock, flags);
+
+ if ((vhci_hcd->port_status[rhport] & PORT_C_MASK) != 0)
+ usb_hcd_poll_rh_status(hcd);
return retval;
}
@@ -438,14 +628,14 @@ static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
static void vhci_tx_urb(struct urb *urb, struct vhci_device *vdev)
{
struct vhci_priv *priv;
- struct vhci_hcd *vhci;
+ struct vhci_hcd *vhci_hcd;
unsigned long flags;
if (!vdev) {
pr_err("could not get virtual device");
return;
}
- vhci = vdev_to_vhci(vdev);
+ vhci_hcd = vdev_to_vhci_hcd(vdev);
priv = kzalloc(sizeof(struct vhci_priv), GFP_ATOMIC);
if (!priv) {
@@ -455,7 +645,7 @@ static void vhci_tx_urb(struct urb *urb, struct vhci_device *vdev)
spin_lock_irqsave(&vdev->priv_lock, flags);
- priv->seqnum = atomic_inc_return(&vhci->seqnum);
+ priv->seqnum = atomic_inc_return(&vhci_hcd->seqnum);
if (priv->seqnum == 0xffff)
dev_info(&urb->dev->dev, "seqnum max\n");
@@ -470,10 +660,10 @@ static void vhci_tx_urb(struct urb *urb, struct vhci_device *vdev)
spin_unlock_irqrestore(&vdev->priv_lock, flags);
}
-static int vhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
- gfp_t mem_flags)
+static int vhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags)
{
- struct vhci_hcd *vhci = hcd_to_vhci(hcd);
+ struct vhci_hcd *vhci_hcd = hcd_to_vhci_hcd(hcd);
+ struct vhci *vhci = vhci_hcd->vhci;
struct device *dev = &urb->dev->dev;
u8 portnum = urb->dev->portnum;
int ret = 0;
@@ -487,7 +677,7 @@ static int vhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
pr_err("invalid port number %d\n", portnum);
return -ENODEV;
}
- vdev = &vhci->vdev[portnum-1];
+ vdev = &vhci_hcd->vdev[portnum-1];
/* patch to usb_sg_init() is in 2.5.60 */
BUG_ON(!urb->transfer_buffer && urb->transfer_buffer_length);
@@ -640,7 +830,8 @@ static int vhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
*/
static int vhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
{
- struct vhci_hcd *vhci = hcd_to_vhci(hcd);
+ struct vhci_hcd *vhci_hcd = hcd_to_vhci_hcd(hcd);
+ struct vhci *vhci = vhci_hcd->vhci;
struct vhci_priv *priv;
struct vhci_device *vdev;
unsigned long flags;
@@ -691,7 +882,7 @@ static int vhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
usb_hcd_unlink_urb_from_ep(hcd, urb);
spin_unlock_irqrestore(&vhci->lock, flags);
- usb_hcd_giveback_urb(vhci_to_hcd(vhci), urb, urb->status);
+ usb_hcd_giveback_urb(hcd, urb, urb->status);
spin_lock_irqsave(&vhci->lock, flags);
} else {
@@ -709,7 +900,7 @@ static int vhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
return -ENOMEM;
}
- unlink->seqnum = atomic_inc_return(&vhci->seqnum);
+ unlink->seqnum = atomic_inc_return(&vhci_hcd->seqnum);
if (unlink->seqnum == 0xffff)
pr_info("seqnum max\n");
@@ -733,8 +924,9 @@ static int vhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
static void vhci_device_unlink_cleanup(struct vhci_device *vdev)
{
- struct vhci_hcd *vhci = vdev_to_vhci(vdev);
- struct usb_hcd *hcd = vhci_to_hcd(vhci);
+ struct vhci_hcd *vhci_hcd = vdev_to_vhci_hcd(vdev);
+ struct usb_hcd *hcd = vhci_hcd_to_hcd(vhci_hcd);
+ struct vhci *vhci = vhci_hcd->vhci;
struct vhci_unlink *unlink, *tmp;
unsigned long flags;
@@ -846,7 +1038,6 @@ static void vhci_shutdown_connection(struct usbip_device *ud)
pr_info("disconnect device\n");
}
-
static void vhci_device_reset(struct usbip_device *ud)
{
struct vhci_device *vdev = container_of(ud, struct vhci_device, ud);
@@ -918,29 +1109,58 @@ static int hcd_name_to_id(const char *name)
return val;
}
+static int vhci_setup(struct usb_hcd *hcd)
+{
+ struct vhci *vhci = *((void **)dev_get_platdata(hcd->self.controller));
+ hcd->self.sg_tablesize = ~0;
+ if (usb_hcd_is_primary_hcd(hcd)) {
+ vhci->vhci_hcd_hs = hcd_to_vhci_hcd(hcd);
+ vhci->vhci_hcd_hs->vhci = vhci;
+ /*
+ * Mark the first roothub as being USB 2.0.
+ * The USB 3.0 roothub will be registered later by
+ * vhci_hcd_probe()
+ */
+ hcd->speed = HCD_USB2;
+ hcd->self.root_hub->speed = USB_SPEED_HIGH;
+ } else {
+ vhci->vhci_hcd_ss = hcd_to_vhci_hcd(hcd);
+ vhci->vhci_hcd_ss->vhci = vhci;
+ hcd->speed = HCD_USB3;
+ hcd->self.root_hub->speed = USB_SPEED_SUPER;
+ }
+ return 0;
+}
+
static int vhci_start(struct usb_hcd *hcd)
{
- struct vhci_hcd *vhci = hcd_to_vhci(hcd);
+ struct vhci_hcd *vhci_hcd = hcd_to_vhci_hcd(hcd);
int id, rhport;
- int err = 0;
+ int err;
usbip_dbg_vhci_hc("enter vhci_start\n");
+ if (usb_hcd_is_primary_hcd(hcd))
+ spin_lock_init(&vhci_hcd->vhci->lock);
+
/* initialize private data of usb_hcd */
for (rhport = 0; rhport < VHCI_HC_PORTS; rhport++) {
- struct vhci_device *vdev = &vhci->vdev[rhport];
+ struct vhci_device *vdev = &vhci_hcd->vdev[rhport];
vhci_device_init(vdev);
vdev->rhport = rhport;
}
- atomic_set(&vhci->seqnum, 0);
- spin_lock_init(&vhci->lock);
+ atomic_set(&vhci_hcd->seqnum, 0);
hcd->power_budget = 0; /* no limit */
hcd->uses_new_polling = 1;
+#ifdef CONFIG_USB_OTG
+ hcd->self.otg_port = 1;
+#endif
+
id = hcd_name_to_id(hcd_name(hcd));
if (id < 0) {
pr_err("invalid vhci name %s\n", hcd_name(hcd));
@@ -948,7 +1168,7 @@ static int vhci_start(struct usb_hcd *hcd)
}
/* vhci_hcd is now ready to be controlled through sysfs */
- if (id == 0) {
+ if (id == 0 && usb_hcd_is_primary_hcd(hcd)) {
err = vhci_init_attr_group();
if (err) {
pr_err("init attr group\n");
@@ -968,21 +1188,21 @@ static int vhci_start(struct usb_hcd *hcd)
static void vhci_stop(struct usb_hcd *hcd)
{
- struct vhci_hcd *vhci = hcd_to_vhci(hcd);
+ struct vhci_hcd *vhci_hcd = hcd_to_vhci_hcd(hcd);
int id, rhport;
usbip_dbg_vhci_hc("stop VHCI controller\n");
/* 1. remove the userland interface of vhci_hcd */
id = hcd_name_to_id(hcd_name(hcd));
- if (id == 0) {
+ if (id == 0 && usb_hcd_is_primary_hcd(hcd)) {
sysfs_remove_group(&hcd_dev(hcd)->kobj, &vhci_attr_group);
vhci_finish_attr_group();
}
/* 2. shutdown all the ports of vhci_hcd */
for (rhport = 0; rhport < VHCI_HC_PORTS; rhport++) {
- struct vhci_device *vdev = &vhci->vdev[rhport];
+ struct vhci_device *vdev = &vhci_hcd->vdev[rhport];
usbip_event_add(&vdev->ud, VDEV_EVENT_REMOVED);
usbip_stop_eh(&vdev->ud);
@@ -1000,7 +1220,7 @@ static int vhci_get_frame_number(struct usb_hcd *hcd)
/* FIXME: suspend/resume */
static int vhci_bus_suspend(struct usb_hcd *hcd)
{
- struct vhci_hcd *vhci = hcd_to_vhci(hcd);
+ struct vhci *vhci = *((void **)dev_get_platdata(hcd->self.controller));
unsigned long flags;
dev_dbg(&hcd->self.root_hub->dev, "%s\n", __func__);
@@ -1014,7 +1234,7 @@ static int vhci_bus_suspend(struct usb_hcd *hcd)
static int vhci_bus_resume(struct usb_hcd *hcd)
{
- struct vhci_hcd *vhci = hcd_to_vhci(hcd);
+ struct vhci *vhci = *((void **)dev_get_platdata(hcd->self.controller));
int rc = 0;
unsigned long flags;
@@ -1036,13 +1256,32 @@ static int vhci_bus_resume(struct usb_hcd *hcd)
#define vhci_bus_resume NULL
#endif
+/* Change a group of bulk endpoints to support multiple stream IDs */
+static int vhci_alloc_streams(struct usb_hcd *hcd, struct usb_device *udev,
+ struct usb_host_endpoint **eps, unsigned int num_eps,
+ unsigned int num_streams, gfp_t mem_flags)
+{
+ dev_dbg(&hcd->self.root_hub->dev, "vhci_alloc_streams not implemented\n");
+ return 0;
+}
+
+/* Reverts a group of bulk endpoints back to not using stream IDs. */
+static int vhci_free_streams(struct usb_hcd *hcd, struct usb_device *udev,
+ struct usb_host_endpoint **eps, unsigned int num_eps,
+ gfp_t mem_flags)
+{
+ dev_dbg(&hcd->self.root_hub->dev, "vhci_free_streams not implemented\n");
+ return 0;
+}
+
static struct hc_driver vhci_hc_driver = {
.description = driver_name,
.product_desc = driver_desc,
.hcd_priv_size = sizeof(struct vhci_hcd),
- .flags = HCD_USB2,
+ .flags = HCD_USB3 | HCD_SHARED,
+ .reset = vhci_setup,
.start = vhci_start,
.stop = vhci_stop,
@@ -1055,11 +1294,16 @@ static struct hc_driver vhci_hc_driver = {
.hub_control = vhci_hub_control,
.bus_suspend = vhci_bus_suspend,
.bus_resume = vhci_bus_resume,
+
+ .alloc_streams = vhci_alloc_streams,
+ .free_streams = vhci_free_streams,
};
static int vhci_hcd_probe(struct platform_device *pdev)
{
- struct usb_hcd *hcd;
+ struct vhci *vhci;
+ struct usb_hcd *hcd_hs;
+ struct usb_hcd *hcd_ss;
int ret;
usbip_dbg_vhci_hc("name %s id %d\n", pdev->name, pdev->id);
@@ -1068,43 +1312,68 @@ static int vhci_hcd_probe(struct platform_device *pdev)
* Allocate and initialize hcd.
* Our private data is also allocated automatically.
*/
- hcd = usb_create_hcd(&vhci_hc_driver, &pdev->dev, dev_name(&pdev->dev));
- if (!hcd) {
- pr_err("create hcd failed\n");
+ hcd_hs = usb_create_hcd(&vhci_hc_driver, &pdev->dev, dev_name(&pdev->dev));
+ if (!hcd_hs) {
+ pr_err("create primary hcd failed\n");
return -ENOMEM;
}
- hcd->has_tt = 1;
+ hcd_hs->has_tt = 1;
/*
* Finish generic HCD structure initialization and register.
* Call the driver's reset() and start() routines.
*/
- ret = usb_add_hcd(hcd, 0, 0);
+ ret = usb_add_hcd(hcd_hs, 0, 0);
if (ret != 0) {
- pr_err("usb_add_hcd failed %d\n", ret);
- usb_put_hcd(hcd);
- return ret;
+ pr_err("usb_add_hcd hs failed %d\n", ret);
+ goto put_usb2_hcd;
+ }
+
+ hcd_ss = usb_create_shared_hcd(&vhci_hc_driver, &pdev->dev,
+ dev_name(&pdev->dev), hcd_hs);
+ if (!hcd_ss) {
+ ret = -ENOMEM;
+ pr_err("create shared hcd failed\n");
+ goto remove_usb2_hcd;
+ }
+
+ ret = usb_add_hcd(hcd_ss, 0, 0);
+ if (ret) {
+ pr_err("usb_add_hcd ss failed %d\n", ret);
+ goto put_usb3_hcd;
}
usbip_dbg_vhci_hc("bye\n");
return 0;
+
+put_usb3_hcd:
+ usb_put_hcd(hcd_ss);
+remove_usb2_hcd:
+ usb_remove_hcd(hcd_hs);
+put_usb2_hcd:
+ usb_put_hcd(hcd_hs);
+ vhci->vhci_hcd_hs = NULL;
+ vhci->vhci_hcd_ss = NULL;
+ return ret;
}
static int vhci_hcd_remove(struct platform_device *pdev)
{
- struct usb_hcd *hcd;
-
- hcd = platform_get_drvdata(pdev);
- if (!hcd)
- return 0;
+ struct vhci *vhci = *((void **)dev_get_platdata(&pdev->dev));
/*
* Disconnects the root hub,
* then reverses the effects of usb_add_hcd(),
* invoking the HCD's stop() methods.
*/
- usb_remove_hcd(hcd);
- usb_put_hcd(hcd);
+ usb_remove_hcd(vhci_hcd_to_hcd(vhci->vhci_hcd_ss));
+ usb_put_hcd(vhci_hcd_to_hcd(vhci->vhci_hcd_ss));
+
+ usb_remove_hcd(vhci_hcd_to_hcd(vhci->vhci_hcd_hs));
+ usb_put_hcd(vhci_hcd_to_hcd(vhci->vhci_hcd_hs));
+
+ vhci->vhci_hcd_hs = NULL;
+ vhci->vhci_hcd_ss = NULL;
return 0;
}
@@ -1115,23 +1384,32 @@ static int vhci_hcd_remove(struct platform_device *pdev)
static int vhci_hcd_suspend(struct platform_device *pdev, pm_message_t state)
{
struct usb_hcd *hcd;
- struct vhci_hcd *vhci;
+ struct vhci *vhci;
int rhport;
int connected = 0;
int ret = 0;
unsigned long flags;
+ dev_dbg(&pdev->dev, "%s\n", __func__);
+
hcd = platform_get_drvdata(pdev);
if (!hcd)
return 0;
- vhci = hcd_to_vhci(hcd);
+
+ vhci = *((void **)dev_get_platdata(hcd->self.controller));
spin_lock_irqsave(&vhci->lock, flags);
- for (rhport = 0; rhport < VHCI_HC_PORTS; rhport++)
- if (vhci->port_status[rhport] & USB_PORT_STAT_CONNECTION)
+ for (rhport = 0; rhport < VHCI_HC_PORTS; rhport++) {
+ if (vhci->vhci_hcd_hs->port_status[rhport] &
+ USB_PORT_STAT_CONNECTION)
connected += 1;
+ if (vhci->vhci_hcd_ss->port_status[rhport] &
+ USB_PORT_STAT_CONNECTION)
+ connected += 1;
+ }
+
spin_unlock_irqrestore(&vhci->lock, flags);
if (connected > 0) {
@@ -1179,34 +1457,16 @@ static struct platform_driver vhci_driver = {
},
};
-static int add_platform_device(int id)
-{
- struct platform_device *pdev;
- int dev_nr;
-
- if (id == 0)
- dev_nr = -1;
- else
- dev_nr = id;
-
- pdev = platform_device_register_simple(driver_name, dev_nr, NULL, 0);
- if (IS_ERR(pdev))
- return PTR_ERR(pdev);
-
- *(vhci_pdevs + id) = pdev;
- return 0;
-}
-
static void del_platform_devices(void)
{
struct platform_device *pdev;
int i;
for (i = 0; i < vhci_num_controllers; i++) {
- pdev = *(vhci_pdevs + i);
+ pdev = vhcis[i].pdev;
if (pdev != NULL)
platform_device_unregister(pdev);
- *(vhci_pdevs + i) = NULL;
+ vhcis[i].pdev = NULL;
}
sysfs_remove_link(&platform_bus.kobj, driver_name);
}
@@ -1221,28 +1481,51 @@ static int __init vhci_hcd_init(void)
if (vhci_num_controllers < 1)
vhci_num_controllers = 1;
- vhci_pdevs = kcalloc(vhci_num_controllers, sizeof(void *), GFP_KERNEL);
- if (vhci_pdevs == NULL)
+ vhcis = kcalloc(vhci_num_controllers, sizeof(struct vhci), GFP_KERNEL);
+ if (vhcis == NULL)
return -ENOMEM;
+ for (i = 0; i < vhci_num_controllers; i++) {
+ vhcis[i].pdev = platform_device_alloc(driver_name, i);
+ if (!vhcis[i].pdev) {
+ i--;
+ while (i >= 0)
+ platform_device_put(vhcis[i--].pdev);
+ ret = -ENOMEM;
+ goto err_device_alloc;
+ }
+ }
+ for (i = 0; i < vhci_num_controllers; i++) {
+ void *vhci = &vhcis[i];
+ ret = platform_device_add_data(vhcis[i].pdev, &vhci, sizeof(void *));
+ if (ret)
+ goto err_driver_register;
+ }
+
ret = platform_driver_register(&vhci_driver);
if (ret)
goto err_driver_register;
for (i = 0; i < vhci_num_controllers; i++) {
- ret = add_platform_device(i);
- if (ret)
- goto err_platform_device_register;
+ ret = platform_device_add(vhcis[i].pdev);
+ if (ret < 0) {
+ i--;
+ while (i >= 0)
+ platform_device_del(vhcis[i--].pdev);
+ goto err_add_hcd;
+ }
}
pr_info(DRIVER_DESC " v" USBIP_VERSION "\n");
return ret;
-err_platform_device_register:
- del_platform_devices();
+err_add_hcd:
platform_driver_unregister(&vhci_driver);
err_driver_register:
- kfree(vhci_pdevs);
+ for (i = 0; i < vhci_num_controllers; i++)
+ platform_device_put(vhcis[i].pdev);
+err_device_alloc:
+ kfree(vhcis);
return ret;
}
@@ -1250,7 +1533,7 @@ static void __exit vhci_hcd_exit(void)
{
del_platform_devices();
platform_driver_unregister(&vhci_driver);
- kfree(vhci_pdevs);
+ kfree(vhcis);
}
module_init(vhci_hcd_init);
diff --git a/drivers/usb/usbip/vhci_rx.c b/drivers/usb/usbip/vhci_rx.c
index fc2d319..ef2f2d5 100644
--- a/drivers/usb/usbip/vhci_rx.c
+++ b/drivers/usb/usbip/vhci_rx.c
@@ -70,7 +70,8 @@ struct urb *pickup_urb_and_free_priv(struct vhci_device *vdev, __u32 seqnum)
static void vhci_recv_ret_submit(struct vhci_device *vdev,
struct usbip_header *pdu)
{
- struct vhci_hcd *vhci = vdev_to_vhci(vdev);
+ struct vhci_hcd *vhci_hcd = vdev_to_vhci_hcd(vdev);
+ struct vhci *vhci = vhci_hcd->vhci;
struct usbip_device *ud = &vdev->ud;
struct urb *urb;
unsigned long flags;
@@ -82,7 +83,7 @@ static void vhci_recv_ret_submit(struct vhci_device *vdev,
if (!urb) {
pr_err("cannot find a urb of seqnum %u\n", pdu->base.seqnum);
pr_info("max seqnum %d\n",
- atomic_read(&vhci->seqnum));
+ atomic_read(&vhci_hcd->seqnum));
usbip_event_add(ud, VDEV_EVENT_ERROR_TCP);
return;
}
@@ -107,10 +108,10 @@ static void vhci_recv_ret_submit(struct vhci_device *vdev,
usbip_dbg_vhci_rx("now giveback urb %p\n", urb);
spin_lock_irqsave(&vhci->lock, flags);
- usb_hcd_unlink_urb_from_ep(vhci_to_hcd(vhci), urb);
+ usb_hcd_unlink_urb_from_ep(vhci_hcd_to_hcd(vhci_hcd), urb);
spin_unlock_irqrestore(&vhci->lock, flags);
- usb_hcd_giveback_urb(vhci_to_hcd(vhci), urb, urb->status);
+ usb_hcd_giveback_urb(vhci_hcd_to_hcd(vhci_hcd), urb, urb->status);
usbip_dbg_vhci_rx("Leave\n");
}
@@ -143,7 +144,8 @@ static struct vhci_unlink *dequeue_pending_unlink(struct vhci_device *vdev,
static void vhci_recv_ret_unlink(struct vhci_device *vdev,
struct usbip_header *pdu)
{
- struct vhci_hcd *vhci = vdev_to_vhci(vdev);
+ struct vhci_hcd *vhci_hcd = vdev_to_vhci_hcd(vdev);
+ struct vhci *vhci = vhci_hcd->vhci;
struct vhci_unlink *unlink;
struct urb *urb;
unsigned long flags;
@@ -177,10 +179,10 @@ static void vhci_recv_ret_unlink(struct vhci_device *vdev,
pr_info("urb->status %d\n", urb->status);
spin_lock_irqsave(&vhci->lock, flags);
- usb_hcd_unlink_urb_from_ep(vhci_to_hcd(vhci), urb);
+ usb_hcd_unlink_urb_from_ep(vhci_hcd_to_hcd(vhci_hcd), urb);
spin_unlock_irqrestore(&vhci->lock, flags);
- usb_hcd_giveback_urb(vhci_to_hcd(vhci), urb, urb->status);
+ usb_hcd_giveback_urb(vhci_hcd_to_hcd(vhci_hcd), urb, urb->status);
}
kfree(unlink);
diff --git a/drivers/usb/usbip/vhci_sysfs.c b/drivers/usb/usbip/vhci_sysfs.c
index b96e5b1..5778b64 100644
--- a/drivers/usb/usbip/vhci_sysfs.c
+++ b/drivers/usb/usbip/vhci_sysfs.c
@@ -29,13 +29,51 @@
/* TODO: refine locking ?*/
+/*
+ * output example:
+ * hub port sta spd dev socket local_busid
+ * hs 0000 004 000 00000000 c5a7bb80 1-2.3
+ * ................................................
+ * ss 0008 004 000 00000000 d8cee980 2-3.4
+ * ................................................
+ *
+ * IP address can be retrieved from a socket pointer address by looking
+ * up /proc/net/{tcp,tcp6}. Also, a userland program may remember a
+ * port number and its peer IP address.
+ */
+static void port_show_vhci(char **out, int hub, int port, struct vhci_device *vdev)
+{
+ if (hub == HUB_SPEED_HIGH)
+ *out += sprintf(*out, "hs %04u %03u ",
+ port, vdev->ud.status);
+ else /* hub == HUB_SPEED_SUPER */
+ *out += sprintf(*out, "ss %04u %03u ",
+ port, vdev->ud.status);
+
+ if (vdev->ud.status == VDEV_ST_USED) {
+ *out += sprintf(*out, "%03u %08x ",
+ vdev->speed, vdev->devid);
+ *out += sprintf(*out, "%16p %s",
+ vdev->ud.tcp_socket,
+ dev_name(&vdev->udev->dev));
+
+ } else {
+ *out += sprintf(*out, "000 00000000 ");
+ *out += sprintf(*out, "0000000000000000 0-0");
+ }
+
+ *out += sprintf(*out, "\n");
+}
+
/* Sysfs entry to show port status */
static ssize_t status_show_vhci(int pdev_nr, char *out)
{
- struct platform_device *pdev = *(vhci_pdevs + pdev_nr);
- struct vhci_hcd *vhci;
+ struct platform_device *pdev = vhcis[pdev_nr].pdev;
+ struct vhci *vhci;
+ struct usb_hcd *hcd;
+ struct vhci_hcd *vhci_hcd;
char *s = out;
- int i = 0;
+ int i;
unsigned long flags;
if (!pdev || !out) {
@@ -43,41 +81,27 @@ static ssize_t status_show_vhci(int pdev_nr, char *out)
return 0;
}
- vhci = hcd_to_vhci(platform_get_drvdata(pdev));
+ hcd = platform_get_drvdata(pdev);
+ vhci_hcd = hcd_to_vhci_hcd(hcd);
+ vhci = vhci_hcd->vhci;
spin_lock_irqsave(&vhci->lock, flags);
- /*
- * output example:
- * port sta spd dev socket local_busid
- * 0000 004 000 00000000 c5a7bb80 1-2.3
- * 0001 004 000 00000000 d8cee980 2-3.4
- *
- * IP address can be retrieved from a socket pointer address by looking
- * up /proc/net/{tcp,tcp6}. Also, a userland program may remember a
- * port number and its peer IP address.
- */
for (i = 0; i < VHCI_HC_PORTS; i++) {
- struct vhci_device *vdev = &vhci->vdev[i];
+ struct vhci_device *vdev = &vhci->vhci_hcd_hs->vdev[i];
spin_lock(&vdev->ud.lock);
- out += sprintf(out, "%04u %03u ",
- (pdev_nr * VHCI_HC_PORTS) + i,
- vdev->ud.status);
+ port_show_vhci(&out, HUB_SPEED_HIGH,
+ pdev_nr * VHCI_PORTS + i, vdev);
+ spin_unlock(&vdev->ud.lock);
+ }
- if (vdev->ud.status == VDEV_ST_USED) {
- out += sprintf(out, "%03u %08x ",
- vdev->speed, vdev->devid);
- out += sprintf(out, "%16p %s",
- vdev->ud.tcp_socket,
- dev_name(&vdev->udev->dev));
+ for (i = 0; i < VHCI_HC_PORTS; i++) {
+ struct vhci_device *vdev = &vhci->vhci_hcd_ss->vdev[i];
- } else {
- out += sprintf(out, "000 00000000 ");
- out += sprintf(out, "0000000000000000 0-0");
- }
-
- out += sprintf(out, "\n");
+ spin_lock(&vdev->ud.lock);
+ port_show_vhci(&out, HUB_SPEED_SUPER,
+ pdev_nr * VHCI_PORTS + VHCI_HC_PORTS + i, vdev);
spin_unlock(&vdev->ud.lock);
}
@@ -92,8 +116,16 @@ static ssize_t status_show_not_ready(int pdev_nr, char *out)
int i = 0;
for (i = 0; i < VHCI_HC_PORTS; i++) {
- out += sprintf(out, "%04u %03u ",
- (pdev_nr * VHCI_HC_PORTS) + i,
+ out += sprintf(out, "hs %04u %03u ",
+ (pdev_nr * VHCI_PORTS) + i,
+ VDEV_ST_NOTASSIGNED);
+ out += sprintf(out, "000 00000000 0000000000000000 0-0");
+ out += sprintf(out, "\n");
+ }
+
+ for (i = 0; i < VHCI_HC_PORTS; i++) {
+ out += sprintf(out, "ss %04u %03u ",
+ (pdev_nr * VHCI_PORTS) + VHCI_HC_PORTS + i,
VDEV_ST_NOTASSIGNED);
out += sprintf(out, "000 00000000 0000000000000000 0-0");
out += sprintf(out, "\n");
@@ -125,7 +157,7 @@ static ssize_t status_show(struct device *dev,
int pdev_nr;
out += sprintf(out,
- "port sta spd dev socket local_busid\n");
+ "hub port sta spd dev socket local_busid\n");
pdev_nr = status_name_to_id(attr->attr.name);
if (pdev_nr < 0)
@@ -141,15 +173,19 @@ static ssize_t nports_show(struct device *dev, struct device_attribute *attr,
{
char *s = out;
- out += sprintf(out, "%d\n", VHCI_HC_PORTS * vhci_num_controllers);
+ /*
+ * Half the ports are for SPEED_HIGH and half for SPEED_SUPER, thus the * 2.
+ */
+ out += sprintf(out, "%d\n", VHCI_PORTS * vhci_num_controllers);
return out - s;
}
static DEVICE_ATTR_RO(nports);
/* Sysfs entry to shutdown a virtual connection */
-static int vhci_port_disconnect(struct vhci_hcd *vhci, __u32 rhport)
+static int vhci_port_disconnect(struct vhci_hcd *vhci_hcd, __u32 rhport)
{
- struct vhci_device *vdev = &vhci->vdev[rhport];
+ struct vhci_device *vdev = &vhci_hcd->vdev[rhport];
+ struct vhci *vhci = vhci_hcd->vhci;
unsigned long flags;
usbip_dbg_vhci_sysfs("enter\n");
@@ -195,6 +231,7 @@ static ssize_t store_detach(struct device *dev, struct device_attribute *attr,
{
__u32 port = 0, pdev_nr = 0, rhport = 0;
struct usb_hcd *hcd;
+ struct vhci_hcd *vhci_hcd;
int ret;
if (kstrtoint(buf, 10, &port) < 0)
@@ -206,13 +243,20 @@ static ssize_t store_detach(struct device *dev, struct device_attribute *attr,
if (!valid_port(pdev_nr, rhport))
return -EINVAL;
- hcd = platform_get_drvdata(*(vhci_pdevs + pdev_nr));
+ hcd = platform_get_drvdata(vhcis[pdev_nr].pdev);
if (hcd == NULL) {
dev_err(dev, "port is not ready %u\n", port);
return -EAGAIN;
}
- ret = vhci_port_disconnect(hcd_to_vhci(hcd), rhport);
+ usbip_dbg_vhci_sysfs("rhport %d\n", rhport);
+
+ if ((port / VHCI_HC_PORTS) % 2)
+ vhci_hcd = hcd_to_vhci_hcd(hcd)->vhci->vhci_hcd_ss;
+ else
+ vhci_hcd = hcd_to_vhci_hcd(hcd)->vhci->vhci_hcd_hs;
+
+ ret = vhci_port_disconnect(vhci_hcd, rhport);
if (ret < 0)
return -EINVAL;
@@ -233,6 +277,7 @@ static int valid_args(__u32 pdev_nr, __u32 rhport, enum usb_device_speed speed)
case USB_SPEED_FULL:
case USB_SPEED_HIGH:
case USB_SPEED_WIRELESS:
+ case USB_SPEED_SUPER:
break;
default:
pr_err("Failed attach request for unsupported USB speed: %s\n",
@@ -262,8 +307,9 @@ static ssize_t store_attach(struct device *dev, struct device_attribute *attr,
int sockfd = 0;
__u32 port = 0, pdev_nr = 0, rhport = 0, devid = 0, speed = 0;
struct usb_hcd *hcd;
- struct vhci_hcd *vhci;
+ struct vhci_hcd *vhci_hcd;
struct vhci_device *vdev;
+ struct vhci *vhci;
int err;
unsigned long flags;
@@ -287,13 +333,19 @@ static ssize_t store_attach(struct device *dev, struct device_attribute *attr,
if (!valid_args(pdev_nr, rhport, speed))
return -EINVAL;
- hcd = platform_get_drvdata(*(vhci_pdevs + pdev_nr));
+ hcd = platform_get_drvdata(vhcis[pdev_nr].pdev);
if (hcd == NULL) {
dev_err(dev, "port %d is not ready\n", port);
return -EAGAIN;
}
- vhci = hcd_to_vhci(hcd);
- vdev = &vhci->vdev[rhport];
+
+ vhci_hcd = hcd_to_vhci_hcd(hcd);
+ vhci = vhci_hcd->vhci;
+
+ if (speed == USB_SPEED_SUPER)
+ vdev = &vhci->vhci_hcd_ss->vdev[rhport];
+ else
+ vdev = &vhci->vhci_hcd_hs->vdev[rhport];
/* Extract socket from fd. */
socket = sockfd_lookup(sockfd, &err);
diff --git a/drivers/uwb/i1480/dfu/phy.c b/drivers/uwb/i1480/dfu/phy.c
index 3b1a87d..1ac8526 100644
--- a/drivers/uwb/i1480/dfu/phy.c
+++ b/drivers/uwb/i1480/dfu/phy.c
@@ -126,6 +126,7 @@ int i1480_mpi_read(struct i1480 *i1480, u8 *data, u16 srcaddr, size_t size)
dev_err(i1480->dev, "MPI-READ: command execution failed: %d\n",
reply->bResultCode);
result = -EIO;
+ goto out;
}
for (cnt = 0; cnt < size; cnt++) {
if (reply->data[cnt].page != (srcaddr + cnt) >> 8)
diff --git a/include/linux/device.h b/include/linux/device.h
index 9ef518af..60ab00b 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -879,6 +879,8 @@ struct dev_links_info {
*
* @offline_disabled: If set, the device is permanently online.
* @offline: Set after successful invocation of bus type's .offline().
+ * @of_node_reused: Set if the device-tree node is shared with an ancestor
+ * device.
*
* At the lowest level, every device in a Linux system is represented by an
* instance of struct device. The device structure contains the information
@@ -966,6 +968,7 @@ struct device {
bool offline_disabled:1;
bool offline:1;
+ bool of_node_reused:1;
};
static inline struct device *kobj_to_dev(struct kobject *kobj)
@@ -1144,6 +1147,7 @@ extern int device_offline(struct device *dev);
extern int device_online(struct device *dev);
extern void set_primary_fwnode(struct device *dev, struct fwnode_handle *fwnode);
extern void set_secondary_fwnode(struct device *dev, struct fwnode_handle *fwnode);
+void device_set_of_node_from_dev(struct device *dev, const struct device *dev2);
static inline int dev_num_vf(struct device *dev)
{
diff --git a/drivers/phy/ulpi_phy.h b/include/linux/phy/ulpi_phy.h
similarity index 100%
rename from drivers/phy/ulpi_phy.h
rename to include/linux/phy/ulpi_phy.h
diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h
index 50398b69..a1f03eb 100644
--- a/include/linux/usb/hcd.h
+++ b/include/linux/usb/hcd.h
@@ -565,9 +565,9 @@ extern void usb_ep0_reinit(struct usb_device *);
((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8)
#define EndpointRequest \
- ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8)
+ ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_ENDPOINT)<<8)
#define EndpointOutRequest \
- ((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8)
+ ((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_ENDPOINT)<<8)
/* class requests from the USB 2.0 hub spec, table 11-15 */
#define HUB_CLASS_REQ(dir, type, request) ((((dir) | (type)) << 8) | (request))
diff --git a/include/linux/usb/typec.h b/include/linux/usb/typec.h
index ec78204..ffe7487 100644
--- a/include/linux/usb/typec.h
+++ b/include/linux/usb/typec.h
@@ -117,13 +117,13 @@ struct typec_altmode_desc {
struct typec_altmode
*typec_partner_register_altmode(struct typec_partner *partner,
- struct typec_altmode_desc *desc);
+ const struct typec_altmode_desc *desc);
struct typec_altmode
*typec_plug_register_altmode(struct typec_plug *plug,
- struct typec_altmode_desc *desc);
+ const struct typec_altmode_desc *desc);
struct typec_altmode
*typec_port_register_altmode(struct typec_port *port,
- struct typec_altmode_desc *desc);
+ const struct typec_altmode_desc *desc);
void typec_unregister_altmode(struct typec_altmode *altmode);
struct typec_port *typec_altmode2port(struct typec_altmode *alt);
@@ -190,6 +190,7 @@ struct typec_partner_desc {
* @pr_set: Set Power Role
* @vconn_set: Set VCONN Role
* @activate_mode: Enter/exit given Alternate Mode
+ * @port_type_set: Set port type
*
* Static capabilities of a single USB Type-C port.
*/
@@ -214,6 +215,9 @@ struct typec_capability {
int (*activate_mode)(const struct typec_capability *,
int mode, int activate);
+ int (*port_type_set)(const struct typec_capability *,
+ enum typec_port_type);
+
};
/* Specific to try_role(). Indicates the user want's to clear the preference. */
diff --git a/include/uapi/linux/usbdevice_fs.h b/include/uapi/linux/usbdevice_fs.h
index a8653a6..0bbfd4a 100644
--- a/include/uapi/linux/usbdevice_fs.h
+++ b/include/uapi/linux/usbdevice_fs.h
@@ -156,6 +156,11 @@ struct usbdevfs_streams {
unsigned char eps[0];
};
+/*
+ * USB_SPEED_* values returned by USBDEVFS_GET_SPEED are defined in
+ * linux/usb/ch9.h
+ */
+
#define USBDEVFS_CONTROL _IOWR('U', 0, struct usbdevfs_ctrltransfer)
#define USBDEVFS_CONTROL32 _IOWR('U', 0, struct usbdevfs_ctrltransfer32)
#define USBDEVFS_BULK _IOWR('U', 2, struct usbdevfs_bulktransfer)
@@ -190,5 +195,6 @@ struct usbdevfs_streams {
#define USBDEVFS_ALLOC_STREAMS _IOR('U', 28, struct usbdevfs_streams)
#define USBDEVFS_FREE_STREAMS _IOR('U', 29, struct usbdevfs_streams)
#define USBDEVFS_DROP_PRIVILEGES _IOW('U', 30, __u32)
+#define USBDEVFS_GET_SPEED _IO('U', 31)
#endif /* _UAPI_LINUX_USBDEVICE_FS_H */
diff --git a/tools/usb/usbip/libsrc/vhci_driver.c b/tools/usb/usbip/libsrc/vhci_driver.c
index f659c14..9bd2cd7 100644
--- a/tools/usb/usbip/libsrc/vhci_driver.c
+++ b/tools/usb/usbip/libsrc/vhci_driver.c
@@ -7,6 +7,7 @@
#include <limits.h>
#include <netdb.h>
#include <libudev.h>
+#include <dirent.h>
#include "sysfs_utils.h"
#undef PROGNAME
@@ -35,18 +36,11 @@ imported_device_init(struct usbip_imported_device *idev, char *busid)
return NULL;
}
-
-
static int parse_status(const char *value)
{
int ret = 0;
char *c;
-
- for (int i = 0; i < vhci_driver->nports; i++)
- memset(&vhci_driver->idev[i], 0, sizeof(vhci_driver->idev[i]));
-
-
/* skip a header line */
c = strchr(value, '\n');
if (!c)
@@ -57,9 +51,11 @@ static int parse_status(const char *value)
int port, status, speed, devid;
unsigned long socket;
char lbusid[SYSFS_BUS_ID_SIZE];
+ struct usbip_imported_device *idev;
+ char hub[3];
- ret = sscanf(c, "%d %d %d %x %lx %31s\n",
- &port, &status, &speed,
+ ret = sscanf(c, "%2s %d %d %d %x %lx %31s\n",
+ hub, &port, &status, &speed,
&devid, &socket, lbusid);
if (ret < 5) {
@@ -67,34 +63,36 @@ static int parse_status(const char *value)
BUG();
}
- dbg("port %d status %d speed %d devid %x",
- port, status, speed, devid);
+ dbg("hub %s port %d status %d speed %d devid %x",
+ hub, port, status, speed, devid);
dbg("socket %lx lbusid %s", socket, lbusid);
-
/* if a device is connected, look at it */
- {
- struct usbip_imported_device *idev = &vhci_driver->idev[port];
+ idev = &vhci_driver->idev[port];
+ memset(idev, 0, sizeof(*idev));
- idev->port = port;
- idev->status = status;
+ if (strncmp("hs", hub, 2) == 0)
+ idev->hub = HUB_SPEED_HIGH;
+ else /* strncmp("ss", hub, 2) == 0 */
+ idev->hub = HUB_SPEED_SUPER;
- idev->devid = devid;
+ idev->port = port;
+ idev->status = status;
- idev->busnum = (devid >> 16);
- idev->devnum = (devid & 0x0000ffff);
+ idev->devid = devid;
- if (idev->status != VDEV_ST_NULL
- && idev->status != VDEV_ST_NOTASSIGNED) {
- idev = imported_device_init(idev, lbusid);
- if (!idev) {
- dbg("imported_device_init failed");
- return -1;
- }
+ idev->busnum = (devid >> 16);
+ idev->devnum = (devid & 0x0000ffff);
+
+ if (idev->status != VDEV_ST_NULL
+ && idev->status != VDEV_ST_NOTASSIGNED) {
+ idev = imported_device_init(idev, lbusid);
+ if (!idev) {
+ dbg("imported_device_init failed");
+ return -1;
}
}
-
/* go to the next line */
c = strchr(c, '\n');
if (!c)
@@ -107,18 +105,33 @@ static int parse_status(const char *value)
return 0;
}
+#define MAX_STATUS_NAME 16
+
static int refresh_imported_device_list(void)
{
const char *attr_status;
+ char status[MAX_STATUS_NAME+1] = "status";
+ int i, ret;
- attr_status = udev_device_get_sysattr_value(vhci_driver->hc_device,
- "status");
- if (!attr_status) {
- err("udev_device_get_sysattr_value failed");
- return -1;
+ for (i = 0; i < vhci_driver->ncontrollers; i++) {
+ if (i > 0)
+ snprintf(status, sizeof(status), "status.%d", i);
+
+ attr_status = udev_device_get_sysattr_value(vhci_driver->hc_device,
+ status);
+ if (!attr_status) {
+ err("udev_device_get_sysattr_value failed");
+ return -1;
+ }
+
+ dbg("controller %d", i);
+
+ ret = parse_status(attr_status);
+ if (ret != 0)
+ return ret;
}
- return parse_status(attr_status);
+ return 0;
}
static int get_nports(void)
@@ -134,6 +147,33 @@ static int get_nports(void)
return (int)strtoul(attr_nports, NULL, 10);
}
+static int vhci_hcd_filter(const struct dirent *dirent)
+{
+ return strcmp(dirent->d_name, "vhci_hcd") >= 0;
+}
+
+static int get_ncontrollers(void)
+{
+ struct dirent **namelist;
+ struct udev_device *platform;
+ int n;
+
+ platform = udev_device_get_parent(vhci_driver->hc_device);
+ if (platform == NULL)
+ return -1;
+
+ n = scandir(udev_device_get_syspath(platform), &namelist, vhci_hcd_filter, NULL);
+ if (n < 0)
+ err("scandir failed");
+ else {
+ for (int i = 0; i < n; i++)
+ free(namelist[i]);
+ free(namelist);
+ }
+
+ return n;
+}
+
/*
* Read the given port's record.
*
@@ -213,16 +253,31 @@ int usbip_vhci_driver_open(void)
vhci_driver->hc_device =
udev_device_new_from_subsystem_sysname(udev_context,
USBIP_VHCI_BUS_TYPE,
- USBIP_VHCI_DRV_NAME);
+ USBIP_VHCI_DEVICE_NAME);
if (!vhci_driver->hc_device) {
err("udev_device_new_from_subsystem_sysname failed");
goto err;
}
vhci_driver->nports = get_nports();
-
dbg("available ports: %d", vhci_driver->nports);
+ if (vhci_driver->nports <= 0) {
+ err("no available ports");
+ goto err;
+ } else if (vhci_driver->nports > MAXNPORT) {
+ err("port number exceeds %d", MAXNPORT);
+ goto err;
+ }
+
+ vhci_driver->ncontrollers = get_ncontrollers();
+ dbg("available controllers: %d", vhci_driver->ncontrollers);
+
+ if (vhci_driver->ncontrollers <=0) {
+ err("no available usb controllers");
+ goto err;
+ }
+
if (refresh_imported_device_list())
goto err;
@@ -270,11 +325,15 @@ int usbip_vhci_refresh_device_list(void)
}
-int usbip_vhci_get_free_port(void)
+int usbip_vhci_get_free_port(uint32_t speed)
{
for (int i = 0; i < vhci_driver->nports; i++) {
+ if (speed == USB_SPEED_SUPER &&
+ vhci_driver->idev[i].hub != HUB_SPEED_SUPER)
+ continue;
+
if (vhci_driver->idev[i].status == VDEV_ST_NULL)
- return i;
+ return vhci_driver->idev[i].port;
}
return -1;
diff --git a/tools/usb/usbip/libsrc/vhci_driver.h b/tools/usb/usbip/libsrc/vhci_driver.h
index fa2316c..4898d3b 100644
--- a/tools/usb/usbip/libsrc/vhci_driver.h
+++ b/tools/usb/usbip/libsrc/vhci_driver.h
@@ -11,9 +11,16 @@
#include "usbip_common.h"
#define USBIP_VHCI_BUS_TYPE "platform"
+#define USBIP_VHCI_DEVICE_NAME "vhci_hcd.0"
#define MAXNPORT 128
+enum hub_speed {
+ HUB_SPEED_HIGH = 0,
+ HUB_SPEED_SUPER,
+};
+
struct usbip_imported_device {
+ enum hub_speed hub;
uint8_t port;
uint32_t status;
@@ -31,6 +38,7 @@ struct usbip_vhci_driver {
/* /sys/devices/platform/vhci_hcd */
struct udev_device *hc_device;
+ int ncontrollers;
int nports;
struct usbip_imported_device idev[MAXNPORT];
};
@@ -44,7 +52,7 @@ void usbip_vhci_driver_close(void);
int usbip_vhci_refresh_device_list(void);
-int usbip_vhci_get_free_port(void);
+int usbip_vhci_get_free_port(uint32_t speed);
int usbip_vhci_attach_device2(uint8_t port, int sockfd, uint32_t devid,
uint32_t speed);
diff --git a/tools/usb/usbip/src/usbip_attach.c b/tools/usb/usbip/src/usbip_attach.c
index 70a6b50..6e89768 100644
--- a/tools/usb/usbip/src/usbip_attach.c
+++ b/tools/usb/usbip/src/usbip_attach.c
@@ -94,6 +94,7 @@ static int import_device(int sockfd, struct usbip_usb_device *udev)
{
int rc;
int port;
+ uint32_t speed = udev->speed;
rc = usbip_vhci_driver_open();
if (rc < 0) {
@@ -101,13 +102,15 @@ static int import_device(int sockfd, struct usbip_usb_device *udev)
return -1;
}
- port = usbip_vhci_get_free_port();
+ port = usbip_vhci_get_free_port(speed);
if (port < 0) {
err("no free port");
usbip_vhci_driver_close();
return -1;
}
+ dbg("got free port %d", port);
+
rc = usbip_vhci_attach_device(port, sockfd, udev->busnum,
udev->devnum, udev->speed);
if (rc < 0) {
