libata: don't check whether to use DMA or not for no data commands
There's no reason to check whether to use DMA or not for no data
commands. Don't do it. While at it, make local variable using_pio in
atapi_xlat() set iff ATAPI_PROT_PIO is going to be used and rename
ata_check_atapi_dma() to atapi_check_dma() for consistency.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index cc816ca..303fc0d 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4297,7 +4297,7 @@
}
/**
- * ata_check_atapi_dma - Check whether ATAPI DMA can be supported
+ * atapi_check_dma - Check whether ATAPI DMA can be supported
* @qc: Metadata associated with taskfile to check
*
* Allow low-level driver to filter ATA PACKET commands, returning
@@ -4310,7 +4310,7 @@
* RETURNS: 0 when ATAPI DMA can be used
* nonzero otherwise
*/
-int ata_check_atapi_dma(struct ata_queued_cmd *qc)
+int atapi_check_dma(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 2e6e162..57a4364 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -2343,8 +2343,8 @@
{
struct scsi_cmnd *scmd = qc->scsicmd;
struct ata_device *dev = qc->dev;
- int using_pio = (dev->flags & ATA_DFLAG_PIO);
int nodata = (scmd->sc_data_direction == DMA_NONE);
+ int using_pio = !nodata && (dev->flags & ATA_DFLAG_PIO);
unsigned int nbytes;
memset(qc->cdb, 0, dev->cdb_len);
@@ -2362,7 +2362,7 @@
ata_qc_set_pc_nbytes(qc);
/* check whether ATAPI DMA is safe */
- if (!using_pio && ata_check_atapi_dma(qc))
+ if (!nodata && !using_pio && atapi_check_dma(qc))
using_pio = 1;
/* Some controller variants snoop this value for Packet
@@ -2402,13 +2402,11 @@
qc->tf.lbam = (nbytes & 0xFF);
qc->tf.lbah = (nbytes >> 8);
- if (using_pio || nodata) {
- /* no data, or PIO data xfer */
- if (nodata)
- qc->tf.protocol = ATAPI_PROT_NODATA;
- else
- qc->tf.protocol = ATAPI_PROT_PIO;
- } else {
+ if (nodata)
+ qc->tf.protocol = ATAPI_PROT_NODATA;
+ else if (using_pio)
+ qc->tf.protocol = ATAPI_PROT_PIO;
+ else {
/* DMA data xfer */
qc->tf.protocol = ATAPI_PROT_DMA;
qc->tf.feature |= ATAPI_PKT_DMA;
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index 4514283..1cf803a 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -106,7 +106,7 @@
extern void ata_qc_free(struct ata_queued_cmd *qc);
extern void ata_qc_issue(struct ata_queued_cmd *qc);
extern void __ata_qc_complete(struct ata_queued_cmd *qc);
-extern int ata_check_atapi_dma(struct ata_queued_cmd *qc);
+extern int atapi_check_dma(struct ata_queued_cmd *qc);
extern void swap_buf_le16(u16 *buf, unsigned int buf_words);
extern void ata_dev_init(struct ata_device *dev);
extern void ata_link_init(struct ata_port *ap, struct ata_link *link, int pmp);
