Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm: (45 commits)
[ARM] 3389/1: typo and grammar fix
[ARM] 3386/1: AT91RM9200 Clock update
[ARM] 3384/1: AT91RM9200: Timer
[ARM] 3382/1: ixp2000: unify defconfigs
[ARM] 3381/1: ixp2000: fix slowport write timing control register fields
[ARM] 3380/1: ixp2000: simplify ixdp2x00_master_npu() check
[ARM] 3379/1: ixp2000: use generic 8250 debug macros
[ARM] 3378/1: ixp2000: fix gpio interrupt handling
[ARM] Quieten spurious IRQ detection
[ARM] Use kcalloc to allocate counter_config array rather than kmalloc
[ARM] Oprofile: dynamically allocate counter_config
[ARM] Oprofile: Convert semaphore to mutex
[ARM] 3376/2: S3C2410 - update defconfig
[ARM] 3375/1: S3C2440 - fix osiris machine build
[ARM] 3374/1: ep93xx: gpio interrupt support
[ARM] 3361/1: S3C24XX - add USB bus clock source
[ARM] 3360/1: S3C2440 - add set rate methods and camera clock
[ARM] 3359/1: S3C24XX - add support for clk_set_rate
[ARM] Convert kmalloc+memset to kzalloc
[ARM] 3373/1: move uengine loader to arch/arm/common
...
diff --git a/Documentation/arm/Samsung-S3C24XX/Overview.txt b/Documentation/arm/Samsung-S3C24XX/Overview.txt
index 89aa89d..8c6ee68 100644
--- a/Documentation/arm/Samsung-S3C24XX/Overview.txt
+++ b/Documentation/arm/Samsung-S3C24XX/Overview.txt
@@ -10,6 +10,8 @@
by the 's3c2410' architecture of ARM Linux. Currently the S3C2410 and
the S3C2440 are supported CPUs.
+ Support for the S3C2400 series is in progress.
+
Configuration
-------------
@@ -32,6 +34,11 @@
A general purpose development board, see EB2410ITX.txt for further
details
+ Simtec Electronics IM2440D20 (Osiris)
+
+ CPU Module from Simtec Electronics, with a S3C2440A CPU, nand flash
+ and a PCMCIA controller.
+
Samsung SMDK2410
Samsung's own development board, geared for PDA work.
@@ -85,6 +92,26 @@
mailing list information.
+I2C
+---
+
+ The hardware I2C core in the CPU is supported in single master
+ mode, and can be configured via platform data.
+
+
+RTC
+---
+
+ Support for the onboard RTC unit, including alarm function.
+
+
+Watchdog
+--------
+
+ The onchip watchdog is available via the standard watchdog
+ interface.
+
+
NAND
----
@@ -121,6 +148,15 @@
various clock units
+Suspend to RAM
+--------------
+
+ For boards that provide support for suspend to RAM, the
+ system can be placed into low power suspend.
+
+ See Suspend.txt for more information.
+
+
Platform Data
-------------
@@ -158,6 +194,7 @@
exported outside arch/arm/mach-s3c2410/, or exported to
modules via EXPORT_SYMBOL() and related functions.
+
Port Contributors
-----------------
@@ -188,8 +225,11 @@
08 Mar 2005 - BJD - Added LCVR to list of people, updated introduction
08 Mar 2005 - BJD - Added section on adding machines
09 Sep 2005 - BJD - Added section on platform data
+ 11 Feb 2006 - BJD - Added I2C, RTC and Watchdog sections
+ 11 Feb 2006 - BJD - Added Osiris machine, and S3C2400 information
+
Document Author
---------------
-Ben Dooks, (c) 2004-2005 Simtec Electronics
+Ben Dooks, (c) 2004-2005,2006 Simtec Electronics
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 32ba00bd..0dd24eb 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -108,6 +108,13 @@
Ethernet interface, two PCMCIA sockets, two serial ports and a
parallel port.
+config ARCH_EP93XX
+ bool "EP93xx-based"
+ select ARM_AMBA
+ select ARM_VIC
+ help
+ This enables support for the Cirrus EP93xx series of CPUs.
+
config ARCH_FOOTBRIDGE
bool "FootBridge"
select FOOTBRIDGE
@@ -250,6 +257,8 @@
source "arch/arm/mach-clps711x/Kconfig"
+source "arch/arm/mach-ep93xx/Kconfig"
+
source "arch/arm/mach-footbridge/Kconfig"
source "arch/arm/mach-integrator/Kconfig"
@@ -434,6 +443,13 @@
Currently at least OMAP, PXA2xx and SA11x0 platforms are known
to have accurate timekeeping with dynamic tick.
+config HZ
+ int
+ default 128 if ARCH_L7200
+ default 200 if ARCH_EBSA110 || ARCH_S3C2410
+ default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER
+ default 100
+
config AEABI
bool "Use the ARM EABI to compile the kernel"
help
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index fbfc14a..b5b1e40 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -105,6 +105,7 @@
machine-$(CONFIG_ARCH_AAEC2000) := aaec2000
machine-$(CONFIG_ARCH_REALVIEW) := realview
machine-$(CONFIG_ARCH_AT91RM9200) := at91rm9200
+ machine-$(CONFIG_ARCH_EP93XX) := ep93xx
ifeq ($(CONFIG_ARCH_EBSA110),y)
# This is what happens if you forget the IOCS16 line.
diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile
index c81a2ff..847e3e6 100644
--- a/arch/arm/common/Makefile
+++ b/arch/arm/common/Makefile
@@ -15,3 +15,4 @@
obj-$(CONFIG_SHARP_PARAM) += sharpsl_param.o
obj-$(CONFIG_SHARPSL_PM) += sharpsl_pm.o
obj-$(CONFIG_SHARP_SCOOP) += scoop.o
+obj-$(CONFIG_ARCH_IXP2000) += uengine.o
diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c
index ad6c89a..7971d0d 100644
--- a/arch/arm/common/dmabounce.c
+++ b/arch/arm/common/dmabounce.c
@@ -5,7 +5,7 @@
* limited DMA windows. These functions utilize bounce buffers to
* copy data to/from buffers located outside the DMA region. This
* only works for systems in which DMA memory is at the bottom of
- * RAM and the remainder of memory is at the top an the DMA memory
+ * RAM, the remainder of memory is at the top and the DMA memory
* can be marked as ZONE_DMA. Anything beyond that such as discontigous
* DMA windows will require custom implementations that reserve memory
* areas at early bootup.
diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c
index 2360940..a7dc137 100644
--- a/arch/arm/common/locomo.c
+++ b/arch/arm/common/locomo.c
@@ -60,7 +60,7 @@
unsigned long phys;
unsigned int irq;
spinlock_t lock;
- void *base;
+ void __iomem *base;
};
struct locomo_dev_info {
@@ -162,7 +162,7 @@
{
int req, i;
struct irqdesc *d;
- void *mapbase = get_irq_chipdata(irq);
+ void __iomem *mapbase = get_irq_chipdata(irq);
/* Acknowledge the parent IRQ */
desc->chip->ack(irq);
@@ -189,7 +189,7 @@
static void locomo_mask_irq(unsigned int irq)
{
- void *mapbase = get_irq_chipdata(irq);
+ void __iomem *mapbase = get_irq_chipdata(irq);
unsigned int r;
r = locomo_readl(mapbase + LOCOMO_ICR);
r &= ~(0x0010 << (irq - LOCOMO_IRQ_START));
@@ -198,7 +198,7 @@
static void locomo_unmask_irq(unsigned int irq)
{
- void *mapbase = get_irq_chipdata(irq);
+ void __iomem *mapbase = get_irq_chipdata(irq);
unsigned int r;
r = locomo_readl(mapbase + LOCOMO_ICR);
r |= (0x0010 << (irq - LOCOMO_IRQ_START));
@@ -215,7 +215,7 @@
struct pt_regs *regs)
{
struct irqdesc *d;
- void *mapbase = get_irq_chipdata(irq);
+ void __iomem *mapbase = get_irq_chipdata(irq);
if (locomo_readl(mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC) & 0x0001) {
d = irq_desc + LOCOMO_IRQ_KEY_START;
@@ -225,7 +225,7 @@
static void locomo_key_ack_irq(unsigned int irq)
{
- void *mapbase = get_irq_chipdata(irq);
+ void __iomem *mapbase = get_irq_chipdata(irq);
unsigned int r;
r = locomo_readl(mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC);
r &= ~(0x0100 << (irq - LOCOMO_IRQ_KEY_START));
@@ -234,7 +234,7 @@
static void locomo_key_mask_irq(unsigned int irq)
{
- void *mapbase = get_irq_chipdata(irq);
+ void __iomem *mapbase = get_irq_chipdata(irq);
unsigned int r;
r = locomo_readl(mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC);
r &= ~(0x0010 << (irq - LOCOMO_IRQ_KEY_START));
@@ -243,7 +243,7 @@
static void locomo_key_unmask_irq(unsigned int irq)
{
- void *mapbase = get_irq_chipdata(irq);
+ void __iomem *mapbase = get_irq_chipdata(irq);
unsigned int r;
r = locomo_readl(mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC);
r |= (0x0010 << (irq - LOCOMO_IRQ_KEY_START));
@@ -261,7 +261,7 @@
{
int req, i;
struct irqdesc *d;
- void *mapbase = get_irq_chipdata(irq);
+ void __iomem *mapbase = get_irq_chipdata(irq);
req = locomo_readl(mapbase + LOCOMO_GIR) &
locomo_readl(mapbase + LOCOMO_GPD) &
@@ -280,7 +280,7 @@
static void locomo_gpio_ack_irq(unsigned int irq)
{
- void *mapbase = get_irq_chipdata(irq);
+ void __iomem *mapbase = get_irq_chipdata(irq);
unsigned int r;
r = locomo_readl(mapbase + LOCOMO_GWE);
r |= (0x0001 << (irq - LOCOMO_IRQ_GPIO_START));
@@ -297,7 +297,7 @@
static void locomo_gpio_mask_irq(unsigned int irq)
{
- void *mapbase = get_irq_chipdata(irq);
+ void __iomem *mapbase = get_irq_chipdata(irq);
unsigned int r;
r = locomo_readl(mapbase + LOCOMO_GIE);
r &= ~(0x0001 << (irq - LOCOMO_IRQ_GPIO_START));
@@ -306,7 +306,7 @@
static void locomo_gpio_unmask_irq(unsigned int irq)
{
- void *mapbase = get_irq_chipdata(irq);
+ void __iomem *mapbase = get_irq_chipdata(irq);
unsigned int r;
r = locomo_readl(mapbase + LOCOMO_GIE);
r |= (0x0001 << (irq - LOCOMO_IRQ_GPIO_START));
@@ -323,7 +323,7 @@
struct pt_regs *regs)
{
struct irqdesc *d;
- void *mapbase = get_irq_chipdata(irq);
+ void __iomem *mapbase = get_irq_chipdata(irq);
if (locomo_readl(mapbase + LOCOMO_LTINT) & 0x0001) {
d = irq_desc + LOCOMO_IRQ_LT_START;
@@ -333,7 +333,7 @@
static void locomo_lt_ack_irq(unsigned int irq)
{
- void *mapbase = get_irq_chipdata(irq);
+ void __iomem *mapbase = get_irq_chipdata(irq);
unsigned int r;
r = locomo_readl(mapbase + LOCOMO_LTINT);
r &= ~(0x0100 << (irq - LOCOMO_IRQ_LT_START));
@@ -342,7 +342,7 @@
static void locomo_lt_mask_irq(unsigned int irq)
{
- void *mapbase = get_irq_chipdata(irq);
+ void __iomem *mapbase = get_irq_chipdata(irq);
unsigned int r;
r = locomo_readl(mapbase + LOCOMO_LTINT);
r &= ~(0x0010 << (irq - LOCOMO_IRQ_LT_START));
@@ -351,7 +351,7 @@
static void locomo_lt_unmask_irq(unsigned int irq)
{
- void *mapbase = get_irq_chipdata(irq);
+ void __iomem *mapbase = get_irq_chipdata(irq);
unsigned int r;
r = locomo_readl(mapbase + LOCOMO_LTINT);
r |= (0x0010 << (irq - LOCOMO_IRQ_LT_START));
@@ -369,7 +369,7 @@
{
int req, i;
struct irqdesc *d;
- void *mapbase = get_irq_chipdata(irq);
+ void __iomem *mapbase = get_irq_chipdata(irq);
req = locomo_readl(mapbase + LOCOMO_SPIIR) & 0x000F;
if (req) {
@@ -386,7 +386,7 @@
static void locomo_spi_ack_irq(unsigned int irq)
{
- void *mapbase = get_irq_chipdata(irq);
+ void __iomem *mapbase = get_irq_chipdata(irq);
unsigned int r;
r = locomo_readl(mapbase + LOCOMO_SPIWE);
r |= (0x0001 << (irq - LOCOMO_IRQ_SPI_START));
@@ -403,7 +403,7 @@
static void locomo_spi_mask_irq(unsigned int irq)
{
- void *mapbase = get_irq_chipdata(irq);
+ void __iomem *mapbase = get_irq_chipdata(irq);
unsigned int r;
r = locomo_readl(mapbase + LOCOMO_SPIIE);
r &= ~(0x0001 << (irq - LOCOMO_IRQ_SPI_START));
@@ -412,7 +412,7 @@
static void locomo_spi_unmask_irq(unsigned int irq)
{
- void *mapbase = get_irq_chipdata(irq);
+ void __iomem *mapbase = get_irq_chipdata(irq);
unsigned int r;
r = locomo_readl(mapbase + LOCOMO_SPIIE);
r |= (0x0001 << (irq - LOCOMO_IRQ_SPI_START));
@@ -428,7 +428,7 @@
static void locomo_setup_irq(struct locomo *lchip)
{
int irq;
- void *irqbase = lchip->base;
+ void __iomem *irqbase = lchip->base;
/*
* Install handler for IRQ_LOCOMO_HW.
@@ -501,12 +501,11 @@
struct locomo_dev *dev;
int ret;
- dev = kmalloc(sizeof(struct locomo_dev), GFP_KERNEL);
+ dev = kzalloc(sizeof(struct locomo_dev), GFP_KERNEL);
if (!dev) {
ret = -ENOMEM;
goto out;
}
- memset(dev, 0, sizeof(struct locomo_dev));
strncpy(dev->dev.bus_id,info->name,sizeof(dev->dev.bus_id));
/*
@@ -664,12 +663,10 @@
unsigned long r;
int i, ret = -ENODEV;
- lchip = kmalloc(sizeof(struct locomo), GFP_KERNEL);
+ lchip = kzalloc(sizeof(struct locomo), GFP_KERNEL);
if (!lchip)
return -ENOMEM;
- memset(lchip, 0, sizeof(struct locomo));
-
spin_lock_init(&lchip->lock);
lchip->dev = me;
diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c
index 93352f6..3f68db8 100644
--- a/arch/arm/common/sa1111.c
+++ b/arch/arm/common/sa1111.c
@@ -26,6 +26,7 @@
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/dma-mapping.h>
+#include <linux/clk.h>
#include <asm/hardware.h>
#include <asm/mach-types.h>
@@ -36,10 +37,6 @@
#include <asm/hardware/sa1111.h>
-#ifdef CONFIG_ARCH_PXA
-#include <asm/arch/pxa-regs.h>
-#endif
-
extern void __init sa1110_mb_enable(void);
/*
@@ -51,6 +48,7 @@
*/
struct sa1111 {
struct device *dev;
+ struct clk *clk;
unsigned long phys;
int irq;
spinlock_t lock;
@@ -451,19 +449,7 @@
spin_lock_irqsave(&sachip->lock, flags);
-#ifdef CONFIG_ARCH_SA1100
- /*
- * First, set up the 3.6864MHz clock on GPIO 27 for the SA-1111:
- * (SA-1110 Developer's Manual, section 9.1.2.1)
- */
- GAFR |= GPIO_32_768kHz;
- GPDR |= GPIO_32_768kHz;
- TUCR = TUCR_3_6864MHz;
-#elif CONFIG_ARCH_PXA
- pxa_gpio_mode(GPIO11_3_6MHz_MD);
-#else
-#error missing clock setup
-#endif
+ clk_enable(sachip->clk);
/*
* Turn VCO on, and disable PLL Bypass.
@@ -555,12 +541,11 @@
struct sa1111_dev *dev;
int ret;
- dev = kmalloc(sizeof(struct sa1111_dev), GFP_KERNEL);
+ dev = kzalloc(sizeof(struct sa1111_dev), GFP_KERNEL);
if (!dev) {
ret = -ENOMEM;
goto out;
}
- memset(dev, 0, sizeof(struct sa1111_dev));
snprintf(dev->dev.bus_id, sizeof(dev->dev.bus_id),
"%4.4lx", info->offset);
@@ -635,11 +620,15 @@
unsigned int has_devs, val;
int i, ret = -ENODEV;
- sachip = kmalloc(sizeof(struct sa1111), GFP_KERNEL);
+ sachip = kzalloc(sizeof(struct sa1111), GFP_KERNEL);
if (!sachip)
return -ENOMEM;
- memset(sachip, 0, sizeof(struct sa1111));
+ sachip->clk = clk_get(me, "GPIO27_CLK");
+ if (!sachip->clk) {
+ ret = PTR_ERR(sachip->clk);
+ goto err_free;
+ }
spin_lock_init(&sachip->lock);
@@ -656,7 +645,7 @@
sachip->base = ioremap(mem->start, PAGE_SIZE * 2);
if (!sachip->base) {
ret = -ENOMEM;
- goto out;
+ goto err_clkput;
}
/*
@@ -666,7 +655,7 @@
if ((id & SKID_ID_MASK) != SKID_SA1111_ID) {
printk(KERN_DEBUG "SA1111 not detected: ID = %08lx\n", id);
ret = -ENODEV;
- goto unmap;
+ goto err_unmap;
}
printk(KERN_INFO "SA1111 Microprocessor Companion Chip: "
@@ -726,9 +715,11 @@
return 0;
- unmap:
+ err_unmap:
iounmap(sachip->base);
- out:
+ err_clkput:
+ clk_put(sachip->clk);
+ err_free:
kfree(sachip);
return ret;
}
@@ -751,6 +742,8 @@
sa1111_writel(0, irqbase + SA1111_WAKEEN0);
sa1111_writel(0, irqbase + SA1111_WAKEEN1);
+ clk_disable(sachip->clk);
+
if (sachip->irq != NO_IRQ) {
set_irq_chained_handler(sachip->irq, NULL);
set_irq_data(sachip->irq, NULL);
@@ -759,6 +752,7 @@
}
iounmap(sachip->base);
+ clk_put(sachip->clk);
kfree(sachip);
}
@@ -857,6 +851,8 @@
sa1111_writel(0, sachip->base + SA1111_SKPWM0);
sa1111_writel(0, sachip->base + SA1111_SKPWM1);
+ clk_disable(sachip->clk);
+
spin_unlock_irqrestore(&sachip->lock, flags);
return 0;
diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c
index a2dfe0b..5e830f4 100644
--- a/arch/arm/common/scoop.c
+++ b/arch/arm/common/scoop.c
@@ -132,12 +132,10 @@
if (!mem)
return -EINVAL;
- devptr = kmalloc(sizeof(struct scoop_dev), GFP_KERNEL);
-
+ devptr = kzalloc(sizeof(struct scoop_dev), GFP_KERNEL);
if (!devptr)
- return -ENOMEM;
+ return -ENOMEM;
- memset(devptr, 0, sizeof(struct scoop_dev));
spin_lock_init(&devptr->scoop_lock);
inf = pdev->dev.platform_data;
diff --git a/arch/arm/mach-ixp2000/uengine.c b/arch/arm/common/uengine.c
similarity index 99%
rename from arch/arm/mach-ixp2000/uengine.c
rename to arch/arm/common/uengine.c
index ec4e007..a1310b7 100644
--- a/arch/arm/mach-ixp2000/uengine.c
+++ b/arch/arm/common/uengine.c
@@ -19,7 +19,7 @@
#include <linux/string.h>
#include <asm/hardware.h>
#include <asm/arch/ixp2000-regs.h>
-#include <asm/arch/uengine.h>
+#include <asm/hardware/uengine.h>
#include <asm/io.h>
#define USTORE_ADDRESS 0x000
diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c
index a45ed16..a19bc4a 100644
--- a/arch/arm/common/vic.c
+++ b/arch/arm/common/vic.c
@@ -22,22 +22,21 @@
#include <linux/list.h>
#include <asm/io.h>
-#include <asm/irq.h>
#include <asm/mach/irq.h>
#include <asm/hardware/vic.h>
-static void __iomem *vic_base;
-
static void vic_mask_irq(unsigned int irq)
{
- irq -= IRQ_VIC_START;
- writel(1 << irq, vic_base + VIC_INT_ENABLE_CLEAR);
+ void __iomem *base = get_irq_chipdata(irq);
+ irq &= 31;
+ writel(1 << irq, base + VIC_INT_ENABLE_CLEAR);
}
static void vic_unmask_irq(unsigned int irq)
{
- irq -= IRQ_VIC_START;
- writel(1 << irq, vic_base + VIC_INT_ENABLE);
+ void __iomem *base = get_irq_chipdata(irq);
+ irq &= 31;
+ writel(1 << irq, base + VIC_INT_ENABLE);
}
static struct irqchip vic_chip = {
@@ -46,43 +45,49 @@
.unmask = vic_unmask_irq,
};
-void __init vic_init(void __iomem *base, u32 vic_sources)
+/**
+ * vic_init - initialise a vectored interrupt controller
+ * @base: iomem base address
+ * @irq_start: starting interrupt number, must be muliple of 32
+ * @vic_sources: bitmask of interrupt sources to allow
+ */
+void __init vic_init(void __iomem *base, unsigned int irq_start,
+ u32 vic_sources)
{
unsigned int i;
- vic_base = base;
-
/* Disable all interrupts initially. */
- writel(0, vic_base + VIC_INT_SELECT);
- writel(0, vic_base + VIC_INT_ENABLE);
- writel(~0, vic_base + VIC_INT_ENABLE_CLEAR);
- writel(0, vic_base + VIC_IRQ_STATUS);
- writel(0, vic_base + VIC_ITCR);
- writel(~0, vic_base + VIC_INT_SOFT_CLEAR);
+ writel(0, base + VIC_INT_SELECT);
+ writel(0, base + VIC_INT_ENABLE);
+ writel(~0, base + VIC_INT_ENABLE_CLEAR);
+ writel(0, base + VIC_IRQ_STATUS);
+ writel(0, base + VIC_ITCR);
+ writel(~0, base + VIC_INT_SOFT_CLEAR);
/*
* Make sure we clear all existing interrupts
*/
- writel(0, vic_base + VIC_VECT_ADDR);
+ writel(0, base + VIC_VECT_ADDR);
for (i = 0; i < 19; i++) {
unsigned int value;
- value = readl(vic_base + VIC_VECT_ADDR);
- writel(value, vic_base + VIC_VECT_ADDR);
+ value = readl(base + VIC_VECT_ADDR);
+ writel(value, base + VIC_VECT_ADDR);
}
for (i = 0; i < 16; i++) {
- void __iomem *reg = vic_base + VIC_VECT_CNTL0 + (i * 4);
+ void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4);
writel(VIC_VECT_CNTL_ENABLE | i, reg);
}
- writel(32, vic_base + VIC_DEF_VECT_ADDR);
+ writel(32, base + VIC_DEF_VECT_ADDR);
for (i = 0; i < 32; i++) {
- unsigned int irq = IRQ_VIC_START + i;
+ unsigned int irq = irq_start + i;
set_irq_chip(irq, &vic_chip);
+ set_irq_chipdata(irq, base);
if (vic_sources & (1 << i)) {
set_irq_handler(irq, do_level_IRQ);
diff --git a/arch/arm/configs/enp2611_defconfig b/arch/arm/configs/enp2611_defconfig
deleted file mode 100644
index 5fdaf3c..0000000
--- a/arch/arm/configs/enp2611_defconfig
+++ /dev/null
@@ -1,974 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-git13
-# Thu Nov 10 15:12:48 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-CONFIG_ARCH_IXP2000=y
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
-CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
-
-#
-# Intel IXP2400/2800 Implementation Options
-#
-
-#
-# IXP2400/2800 Platforms
-#
-CONFIG_ARCH_ENP2611=y
-# CONFIG_ARCH_IXDP2400 is not set
-# CONFIG_ARCH_IXDP2800 is not set
-# CONFIG_ARCH_IXDP2401 is not set
-# CONFIG_ARCH_IXDP2801 is not set
-# CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
-# CONFIG_ARM_THUMB is not set
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-CONFIG_ISA_DMA_API=y
-CONFIG_PCI=y
-CONFIG_PCI_LEGACY_PROC=y
-# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,57600 root=/dev/nfs ip=bootp mem=64M@0x0"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-CONFIG_FPE_NWFPE_XP=y
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-CONFIG_MTD_IXP2000=y
-# CONFIG_MTD_PCI is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-CONFIG_EEPRO100=y
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-CONFIG_WAN=y
-# CONFIG_DSCC4 is not set
-# CONFIG_LANMEDIA is not set
-# CONFIG_SYNCLINK_SYNCPPP is not set
-CONFIG_HDLC=y
-CONFIG_HDLC_RAW=y
-# CONFIG_HDLC_RAW_ETH is not set
-CONFIG_HDLC_CISCO=y
-CONFIG_HDLC_FR=y
-CONFIG_HDLC_PPP=y
-
-#
-# X.25/LAPB support is disabled
-#
-# CONFIG_PCI200SYN is not set
-# CONFIG_WANXL is not set
-# CONFIG_PC300 is not set
-# CONFIG_FARSYNC is not set
-CONFIG_DLCI=y
-CONFIG_DLCI_COUNT=24
-CONFIG_DLCI_MAX=8
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_IXP2000_WATCHDOG=y
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_IXP2000=y
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-CONFIG_SENSORS_EEPROM=y
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_RTC_X1205_I2C is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_DEBUG_VM is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_RCU_TORTURE_TEST is not set
-CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_WAITQ is not set
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/ixdp2801_defconfig b/arch/arm/configs/ep93xx_defconfig
similarity index 62%
copy from arch/arm/configs/ixdp2801_defconfig
copy to arch/arm/configs/ep93xx_defconfig
index f54f3dc..8dcc8e8 100644
--- a/arch/arm/configs/ixdp2801_defconfig
+++ b/arch/arm/configs/ep93xx_defconfig
@@ -1,11 +1,10 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-git13
-# Thu Nov 10 15:15:03 2005
+# Linux kernel version: 2.6.16
+# Mon Mar 20 14:54:51 2006
#
CONFIG_ARM=y
CONFIG_MMU=y
-CONFIG_UID16=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
@@ -13,7 +12,6 @@
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
@@ -25,38 +23,42 @@
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
-CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_UID16=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+CONFIG_OBSOLETE_INTERMODULE=y
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
@@ -70,14 +72,14 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_AS is not set
CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="deadline"
#
# System Type
@@ -86,11 +88,12 @@
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
+CONFIG_ARCH_EP93XX=y
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_IOP3XX is not set
# CONFIG_ARCH_IXP4XX is not set
-CONFIG_ARCH_IXP2000=y
+# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_L7200 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_RPC is not set
@@ -104,47 +107,44 @@
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
-CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
+# CONFIG_ARCH_AT91RM9200 is not set
#
-# Intel IXP2400/2800 Implementation Options
+# Cirrus EP93xx Implementation Options
#
+CONFIG_CRUNCH=y
#
-# IXP2400/2800 Platforms
+# EP93xx Platforms
#
-# CONFIG_ARCH_ENP2611 is not set
-# CONFIG_ARCH_IXDP2400 is not set
-# CONFIG_ARCH_IXDP2800 is not set
-# CONFIG_ARCH_IXDP2401 is not set
-CONFIG_ARCH_IXDP2801=y
-CONFIG_ARCH_IXDP2X01=y
-# CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO is not set
+CONFIG_MACH_GESBC9312=y
+CONFIG_MACH_TS72XX=y
#
# Processor Type
#
CONFIG_CPU_32=y
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_ARM920T=y
+CONFIG_CPU_32v4=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_CACHE_V4WT=y
CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
CONFIG_CPU_TLB_V4WBI=y
#
# Processor Features
#
-# CONFIG_ARM_THUMB is not set
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_XSCALE_PMU=y
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+CONFIG_ARM_VIC=y
#
# Bus support
#
-CONFIG_ISA_DMA_API=y
-CONFIG_PCI=y
-CONFIG_PCI_LEGACY_PROC=y
-# CONFIG_PCI_DEBUG is not set
+CONFIG_ARM_AMBA=y
#
# PCCARD (PCMCIA/CardBus) support
@@ -156,6 +156,8 @@
#
# CONFIG_PREEMPT is not set
# CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
@@ -172,7 +174,7 @@
#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M@0x0"
+CONFIG_CMDLINE="console=ttyAM0,115200 root=/dev/nfs ip=bootp"
# CONFIG_XIP_KERNEL is not set
#
@@ -198,6 +200,7 @@
# Power management options
#
# CONFIG_PM is not set
+# CONFIG_APM is not set
#
# Networking
@@ -207,10 +210,13 @@
#
# Networking options
#
+# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+CONFIG_NET_KEY=y
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
@@ -243,6 +249,11 @@
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
@@ -260,7 +271,6 @@
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
@@ -279,21 +289,26 @@
# Generic Driver Options
#
CONFIG_STANDALONE=y
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
# Memory Technology Devices (MTD)
#
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-CONFIG_MTD_REDBOOT_PARTS_READONLY=y
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_AFS_PARTS is not set
@@ -313,7 +328,11 @@
CONFIG_MTD_CFI=y
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_GEOMETRY is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
@@ -324,29 +343,31 @@
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_AMDSTD_RETRY=0
+CONFIG_MTD_CFI_STAA=y
CONFIG_MTD_CFI_UTIL=y
# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
+CONFIG_MTD_ROM=y
# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
#
# Mapping drivers for chip access
#
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=1
# CONFIG_MTD_ARM_INTEGRATOR is not set
-CONFIG_MTD_IXP2000=y
-# CONFIG_MTD_PCI is not set
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
-# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
@@ -363,7 +384,11 @@
#
# NAND Flash Device Drivers
#
-# CONFIG_MTD_NAND is not set
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
#
# OneNAND Flash Device Drivers
@@ -382,19 +407,12 @@
#
# Block devices
#
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
@@ -402,7 +420,40 @@
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
+CONFIG_SCSI=y
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DEBUG is not set
#
# Multi-device support (RAID and LVM)
@@ -417,28 +468,21 @@
#
# IEEE 1394 (FireWire) support
#
-# CONFIG_IEEE1394 is not set
#
# I2O device support
#
-# CONFIG_I2O is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
+# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
# PHY device support
#
# CONFIG_PHYLIB is not set
@@ -448,67 +492,20 @@
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-CONFIG_CS89x0=y
-# CONFIG_DGRS is not set
-CONFIG_EEPRO100=y
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
# Ethernet (1000 Mbit)
#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
#
# Token Ring devices
#
-# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
@@ -518,29 +515,7 @@
#
# Wan interfaces
#
-CONFIG_WAN=y
-# CONFIG_DSCC4 is not set
-# CONFIG_LANMEDIA is not set
-# CONFIG_SYNCLINK_SYNCPPP is not set
-CONFIG_HDLC=y
-CONFIG_HDLC_RAW=y
-# CONFIG_HDLC_RAW_ETH is not set
-CONFIG_HDLC_CISCO=y
-CONFIG_HDLC_FR=y
-CONFIG_HDLC_PPP=y
-
-#
-# X.25/LAPB support is disabled
-#
-# CONFIG_PCI200SYN is not set
-# CONFIG_WANXL is not set
-# CONFIG_PC300 is not set
-# CONFIG_FARSYNC is not set
-CONFIG_DLCI=y
-CONFIG_DLCI_COUNT=24
-CONFIG_DLCI_MAX=8
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
+# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
@@ -556,28 +531,7 @@
#
# Input device support
#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
+# CONFIG_INPUT is not set
#
# Hardware I/O ports
@@ -594,20 +548,18 @@
#
# Serial drivers
#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=3
-# CONFIG_SERIAL_8250_EXTENDED is not set
+# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
+CONFIG_SERIAL_AMBA_PL010=y
+CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
+# CONFIG_SERIAL_AMBA_PL011 is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_LEGACY_PTYS is not set
#
# IPMI
@@ -624,23 +576,19 @@
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_IXP2000_WATCHDOG=y
#
-# PCI-based Watchdog Cards
+# USB-based Watchdog Cards
#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
+# CONFIG_USBPCWATCHDOG is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
#
@@ -665,27 +613,8 @@
#
# I2C Hardware Bus support
#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_IXP2000=y
-# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set
#
@@ -693,17 +622,28 @@
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
-CONFIG_SENSORS_EEPROM=y
+# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_RTC_X1205_I2C is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_I2C_DEBUG_CORE=y
+CONFIG_I2C_DEBUG_ALGO=y
+CONFIG_I2C_DEBUG_BUS=y
+CONFIG_I2C_DEBUG_CHIP=y
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
#
# Hardware Monitoring support
@@ -718,6 +658,7 @@
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_GL518SM is not set
@@ -735,10 +676,8 @@
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83L785TS is not set
@@ -778,14 +717,144 @@
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+CONFIG_USB_DYNAMIC_MINORS=y
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Multimedia devices
+#
+# CONFIG_USB_DABUSB is not set
+
+#
+# Video4Linux support is needed for USB Multimedia device support
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+CONFIG_USB_RTL8150=y
+# CONFIG_USB_USBNET is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+CONFIG_USB_SERIAL=y
+CONFIG_USB_SERIAL_CONSOLE=y
+# CONFIG_USB_SERIAL_GENERIC is not set
+# CONFIG_USB_SERIAL_AIRPRIME is not set
+# CONFIG_USB_SERIAL_ANYDATA is not set
+# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+# CONFIG_USB_SERIAL_EMPEG is not set
+# CONFIG_USB_SERIAL_FTDI_SIO is not set
+# CONFIG_USB_SERIAL_VISOR is not set
+# CONFIG_USB_SERIAL_IPAQ is not set
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+# CONFIG_USB_SERIAL_GARMIN is not set
+# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+# CONFIG_USB_SERIAL_MCT_U232 is not set
+CONFIG_USB_SERIAL_PL2303=y
+# CONFIG_USB_SERIAL_HP4X is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_TI is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SERIAL_OMNINET is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
@@ -799,21 +868,17 @@
# File systems
#
CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT3_FS_XATTR is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
+# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
@@ -832,8 +897,11 @@
#
# DOS/FAT/NT Filesystems
#
+CONFIG_FAT_FS=y
# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
@@ -845,6 +913,7 @@
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -913,12 +982,52 @@
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
#
# Native Language Support
#
-# CONFIG_NLS is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
#
# Profiling support
@@ -929,13 +1038,14 @@
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_SLAB=y
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_DEBUG_SPINLOCK=y
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
@@ -943,9 +1053,10 @@
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_WAITQ is not set
+CONFIG_DEBUG_WAITQ=y
CONFIG_DEBUG_ERRORS=y
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_ICEDCC is not set
@@ -971,6 +1082,6 @@
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
+CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/ixdp2400_defconfig b/arch/arm/configs/ixdp2400_defconfig
deleted file mode 100644
index c67fc44..0000000
--- a/arch/arm/configs/ixdp2400_defconfig
+++ /dev/null
@@ -1,975 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-git13
-# Thu Nov 10 15:14:13 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-CONFIG_ARCH_IXP2000=y
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
-CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
-
-#
-# Intel IXP2400/2800 Implementation Options
-#
-
-#
-# IXP2400/2800 Platforms
-#
-# CONFIG_ARCH_ENP2611 is not set
-CONFIG_ARCH_IXDP2400=y
-# CONFIG_ARCH_IXDP2800 is not set
-CONFIG_ARCH_IXDP2X00=y
-# CONFIG_ARCH_IXDP2401 is not set
-# CONFIG_ARCH_IXDP2801 is not set
-# CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
-# CONFIG_ARM_THUMB is not set
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-CONFIG_ISA_DMA_API=y
-CONFIG_PCI=y
-CONFIG_PCI_LEGACY_PROC=y
-# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,57600 root=/dev/nfs ip=bootp mem=64M@0x0"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-CONFIG_FPE_NWFPE_XP=y
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-CONFIG_MTD_IXP2000=y
-# CONFIG_MTD_PCI is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-CONFIG_EEPRO100=y
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-CONFIG_WAN=y
-# CONFIG_DSCC4 is not set
-# CONFIG_LANMEDIA is not set
-# CONFIG_SYNCLINK_SYNCPPP is not set
-CONFIG_HDLC=y
-CONFIG_HDLC_RAW=y
-# CONFIG_HDLC_RAW_ETH is not set
-CONFIG_HDLC_CISCO=y
-CONFIG_HDLC_FR=y
-CONFIG_HDLC_PPP=y
-
-#
-# X.25/LAPB support is disabled
-#
-# CONFIG_PCI200SYN is not set
-# CONFIG_WANXL is not set
-# CONFIG_PC300 is not set
-# CONFIG_FARSYNC is not set
-CONFIG_DLCI=y
-CONFIG_DLCI_COUNT=24
-CONFIG_DLCI_MAX=8
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=1
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_IXP2000_WATCHDOG=y
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_IXP2000=y
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-CONFIG_SENSORS_EEPROM=y
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_RTC_X1205_I2C is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_DEBUG_VM is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_RCU_TORTURE_TEST is not set
-CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_WAITQ is not set
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/ixdp2401_defconfig b/arch/arm/configs/ixdp2401_defconfig
deleted file mode 100644
index 60d66e8..0000000
--- a/arch/arm/configs/ixdp2401_defconfig
+++ /dev/null
@@ -1,976 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-git13
-# Thu Nov 10 15:14:50 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-CONFIG_ARCH_IXP2000=y
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
-CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
-
-#
-# Intel IXP2400/2800 Implementation Options
-#
-
-#
-# IXP2400/2800 Platforms
-#
-# CONFIG_ARCH_ENP2611 is not set
-# CONFIG_ARCH_IXDP2400 is not set
-# CONFIG_ARCH_IXDP2800 is not set
-CONFIG_ARCH_IXDP2401=y
-# CONFIG_ARCH_IXDP2801 is not set
-CONFIG_ARCH_IXDP2X01=y
-# CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
-# CONFIG_ARM_THUMB is not set
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-CONFIG_ISA_DMA_API=y
-CONFIG_PCI=y
-CONFIG_PCI_LEGACY_PROC=y
-# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M@0x0"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-CONFIG_FPE_NWFPE_XP=y
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-CONFIG_MTD_IXP2000=y
-# CONFIG_MTD_PCI is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-CONFIG_CS89x0=y
-# CONFIG_DGRS is not set
-CONFIG_EEPRO100=y
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-CONFIG_WAN=y
-# CONFIG_DSCC4 is not set
-# CONFIG_LANMEDIA is not set
-# CONFIG_SYNCLINK_SYNCPPP is not set
-CONFIG_HDLC=y
-CONFIG_HDLC_RAW=y
-# CONFIG_HDLC_RAW_ETH is not set
-CONFIG_HDLC_CISCO=y
-CONFIG_HDLC_FR=y
-CONFIG_HDLC_PPP=y
-
-#
-# X.25/LAPB support is disabled
-#
-# CONFIG_PCI200SYN is not set
-# CONFIG_WANXL is not set
-# CONFIG_PC300 is not set
-# CONFIG_FARSYNC is not set
-CONFIG_DLCI=y
-CONFIG_DLCI_COUNT=24
-CONFIG_DLCI_MAX=8
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=3
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_IXP2000_WATCHDOG=y
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_IXP2000=y
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-CONFIG_SENSORS_EEPROM=y
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_RTC_X1205_I2C is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_DEBUG_VM is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_RCU_TORTURE_TEST is not set
-CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_WAITQ is not set
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/ixdp2800_defconfig b/arch/arm/configs/ixdp2800_defconfig
deleted file mode 100644
index 4248123..0000000
--- a/arch/arm/configs/ixdp2800_defconfig
+++ /dev/null
@@ -1,975 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-git13
-# Thu Nov 10 15:14:56 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-CONFIG_ARCH_IXP2000=y
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
-CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
-
-#
-# Intel IXP2400/2800 Implementation Options
-#
-
-#
-# IXP2400/2800 Platforms
-#
-# CONFIG_ARCH_ENP2611 is not set
-# CONFIG_ARCH_IXDP2400 is not set
-CONFIG_ARCH_IXDP2800=y
-CONFIG_ARCH_IXDP2X00=y
-# CONFIG_ARCH_IXDP2401 is not set
-# CONFIG_ARCH_IXDP2801 is not set
-# CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
-# CONFIG_ARM_THUMB is not set
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-CONFIG_ISA_DMA_API=y
-CONFIG_PCI=y
-CONFIG_PCI_LEGACY_PROC=y
-# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,9600 root=/dev/nfs ip=bootp mem=64M@0x0"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-CONFIG_FPE_NWFPE_XP=y
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-CONFIG_MTD_IXP2000=y
-# CONFIG_MTD_PCI is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-CONFIG_EEPRO100=y
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-CONFIG_WAN=y
-# CONFIG_DSCC4 is not set
-# CONFIG_LANMEDIA is not set
-# CONFIG_SYNCLINK_SYNCPPP is not set
-CONFIG_HDLC=y
-CONFIG_HDLC_RAW=y
-# CONFIG_HDLC_RAW_ETH is not set
-CONFIG_HDLC_CISCO=y
-CONFIG_HDLC_FR=y
-CONFIG_HDLC_PPP=y
-
-#
-# X.25/LAPB support is disabled
-#
-# CONFIG_PCI200SYN is not set
-# CONFIG_WANXL is not set
-# CONFIG_PC300 is not set
-# CONFIG_FARSYNC is not set
-CONFIG_DLCI=y
-CONFIG_DLCI_COUNT=24
-CONFIG_DLCI_MAX=8
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=1
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_IXP2000_WATCHDOG=y
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_IXP2000=y
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-CONFIG_SENSORS_EEPROM=y
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_RTC_X1205_I2C is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_DEBUG_VM is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_RCU_TORTURE_TEST is not set
-CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_WAITQ is not set
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/ixdp2801_defconfig b/arch/arm/configs/ixp2000_defconfig
similarity index 95%
rename from arch/arm/configs/ixdp2801_defconfig
rename to arch/arm/configs/ixp2000_defconfig
index f54f3dc..7b02ca0 100644
--- a/arch/arm/configs/ixdp2801_defconfig
+++ b/arch/arm/configs/ixp2000_defconfig
@@ -1,11 +1,10 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-git13
-# Thu Nov 10 15:15:03 2005
+# Linux kernel version: 2.6.16-rc2
+# Wed Feb 8 04:49:11 2006
#
CONFIG_ARM=y
CONFIG_MMU=y
-CONFIG_UID16=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
@@ -29,27 +28,31 @@
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_UID16=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+CONFIG_OBSOLETE_INTERMODULE=y
#
# Loadable module support
@@ -104,6 +107,7 @@
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_AT91RM9200 is not set
CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
#
@@ -113,10 +117,11 @@
#
# IXP2400/2800 Platforms
#
-# CONFIG_ARCH_ENP2611 is not set
-# CONFIG_ARCH_IXDP2400 is not set
-# CONFIG_ARCH_IXDP2800 is not set
-# CONFIG_ARCH_IXDP2401 is not set
+CONFIG_ARCH_ENP2611=y
+CONFIG_ARCH_IXDP2400=y
+CONFIG_ARCH_IXDP2800=y
+CONFIG_ARCH_IXDP2X00=y
+CONFIG_ARCH_IXDP2401=y
CONFIG_ARCH_IXDP2801=y
CONFIG_ARCH_IXDP2X01=y
# CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO is not set
@@ -141,7 +146,6 @@
#
# Bus support
#
-CONFIG_ISA_DMA_API=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
# CONFIG_PCI_DEBUG is not set
@@ -156,6 +160,7 @@
#
# CONFIG_PREEMPT is not set
# CONFIG_NO_IDLE_HZ is not set
+# CONFIG_AEABI is not set
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
@@ -172,7 +177,7 @@
#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M@0x0"
+CONFIG_CMDLINE="console=ttyS0,57600 root=/dev/nfs ip=bootp mem=64M@0x0"
# CONFIG_XIP_KERNEL is not set
#
@@ -198,6 +203,7 @@
# Power management options
#
# CONFIG_PM is not set
+# CONFIG_APM is not set
#
# Networking
@@ -243,6 +249,11 @@
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
@@ -260,7 +271,6 @@
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
@@ -284,6 +294,11 @@
# CONFIG_DEBUG_DRIVER is not set
#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
# Memory Technology Devices (MTD)
#
CONFIG_MTD=y
@@ -331,6 +346,7 @@
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
# CONFIG_MTD_XIP is not set
#
@@ -487,12 +503,14 @@
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
+CONFIG_ENP2611_MSF_NET=y
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
@@ -597,6 +615,7 @@
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=3
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
@@ -604,7 +623,6 @@
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -706,6 +724,12 @@
# CONFIG_I2C_DEBUG_CHIP is not set
#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
# Hardware Monitoring support
#
CONFIG_HWMON=y
@@ -739,6 +763,7 @@
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83L785TS is not set
@@ -814,6 +839,7 @@
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
@@ -845,6 +871,7 @@
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -913,6 +940,7 @@
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
#
@@ -929,12 +957,13 @@
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
@@ -943,6 +972,7 @@
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_USER=y
# CONFIG_DEBUG_WAITQ is not set
diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
index 6695b07c..3cec29d 100644
--- a/arch/arm/configs/s3c2410_defconfig
+++ b/arch/arm/configs/s3c2410_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc2
-# Mon Feb 6 11:17:23 2006
+# Linux kernel version: 2.6.16
+# Mon Mar 20 20:36:02 2006
#
CONFIG_ARM=y
CONFIG_MMU=y
@@ -12,7 +12,6 @@
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
@@ -87,6 +86,7 @@
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_IOP3XX is not set
@@ -111,6 +111,7 @@
# S3C24XX Implementations
#
CONFIG_MACH_ANUBIS=y
+CONFIG_MACH_OSIRIS=y
CONFIG_ARCH_BAST=y
CONFIG_BAST_PC104_IRQ=y
CONFIG_ARCH_H1940=y
@@ -175,6 +176,7 @@
#
# CONFIG_PREEMPT is not set
# CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=200
# CONFIG_AEABI is not set
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
CONFIG_SELECT_MEMORY_MODEL=y
@@ -230,6 +232,7 @@
#
# Networking options
#
+# CONFIG_NETDEBUG is not set
# CONFIG_PACKET is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
@@ -364,7 +367,6 @@
CONFIG_MTD_ROM=y
# CONFIG_MTD_ABSENT is not set
# CONFIG_MTD_OBSOLETE_CHIPS is not set
-# CONFIG_MTD_XIP is not set
#
# Mapping drivers for chip access
@@ -431,6 +433,7 @@
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
@@ -623,7 +626,6 @@
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINKMP is not set
-# CONFIG_SYNCLINK_GT is not set
# CONFIG_N_HDLC is not set
# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not set
@@ -686,6 +688,11 @@
# CONFIG_PCWATCHDOG is not set
# CONFIG_MIXCOMWD is not set
# CONFIG_WDT is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
CONFIG_S3C2410_RTC=y
@@ -751,6 +758,11 @@
# CONFIG_SPI_MASTER is not set
#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
# Hardware Monitoring support
#
CONFIG_HWMON=y
@@ -763,6 +775,7 @@
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_GL518SM is not set
@@ -850,16 +863,138 @@
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
+# may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_STORAGE is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
+# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+
+#
+# USB Multimedia devices
+#
+# CONFIG_USB_DABUSB is not set
+
+#
+# Video4Linux support is needed for USB Multimedia device support
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+# CONFIG_USB_USS720 is not set
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
#
# MMC/SD Card support
diff --git a/arch/arm/kernel/apm.c b/arch/arm/kernel/apm.c
index 766b6c0..2bed290 100644
--- a/arch/arm/kernel/apm.c
+++ b/arch/arm/kernel/apm.c
@@ -357,10 +357,8 @@
{
struct apm_user *as;
- as = (struct apm_user *)kmalloc(sizeof(*as), GFP_KERNEL);
+ as = (struct apm_user *)kzalloc(sizeof(*as), GFP_KERNEL);
if (as) {
- memset(as, 0, sizeof(*as));
-
/*
* XXX - this is a tiny bit broken, when we consider BSD
* process accounting. If the device is opened by root, we
diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c
index c4923fa..de606df 100644
--- a/arch/arm/kernel/bios32.c
+++ b/arch/arm/kernel/bios32.c
@@ -540,12 +540,10 @@
int nr, busnr;
for (nr = busnr = 0; nr < hw->nr_controllers; nr++) {
- sys = kmalloc(sizeof(struct pci_sys_data), GFP_KERNEL);
+ sys = kzalloc(sizeof(struct pci_sys_data), GFP_KERNEL);
if (!sys)
panic("PCI: unable to allocate sys data!");
- memset(sys, 0, sizeof(struct pci_sys_data));
-
sys->hw = hw;
sys->busnr = busnr;
sys->swizzle = hw->swizzle;
diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S
index caaa919..da280ba 100644
--- a/arch/arm/kernel/debug.S
+++ b/arch/arm/kernel/debug.S
@@ -11,7 +11,6 @@
*/
#include <linux/config.h>
#include <linux/linkage.h>
-#include <asm/hardware.h>
.text
diff --git a/arch/arm/kernel/ecard.c b/arch/arm/kernel/ecard.c
index 74ea29c..00aa225 100644
--- a/arch/arm/kernel/ecard.c
+++ b/arch/arm/kernel/ecard.c
@@ -807,14 +807,12 @@
unsigned long base;
int i;
- ec = kmalloc(sizeof(ecard_t), GFP_KERNEL);
+ ec = kzalloc(sizeof(ecard_t), GFP_KERNEL);
if (!ec) {
ec = ERR_PTR(-ENOMEM);
goto nomem;
}
- memset(ec, 0, sizeof(ecard_t));
-
ec->slot_no = slot;
ec->type = type;
ec->irq = NO_IRQ;
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index ec48d70..355914f 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -484,7 +484,6 @@
movcss r7, r5, lsr #(TIF_USING_IWMMXT + 1)
bcs iwmmxt_task_enable
#endif
- enable_irq
add pc, pc, r8, lsr #6
mov r0, r0
@@ -511,6 +510,7 @@
mov pc, lr @ CP#15 (Control)
do_fpe:
+ enable_irq
ldr r4, .LCfp
add r10, r10, #TI_FPSTATE @ r10 = workspace
ldr pc, [r4] @ Call FP module USR entry point
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index 1aca1775..84277fe 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -28,10 +28,9 @@
#define PROCINFO_INITFUNC 12
#define MACHINFO_TYPE 0
-#define MACHINFO_PHYSRAM 4
-#define MACHINFO_PHYSIO 8
-#define MACHINFO_PGOFFIO 12
-#define MACHINFO_NAME 16
+#define MACHINFO_PHYSIO 4
+#define MACHINFO_PGOFFIO 8
+#define MACHINFO_NAME 12
#define KERNEL_RAM_ADDR (PAGE_OFFSET + TEXT_OFFSET)
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index 1d50d2b..2d5896b 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -305,14 +305,19 @@
static int count = 100;
struct irqaction *action;
- if (!count || noirqdebug)
+ if (noirqdebug)
return;
- count--;
-
if (ret != IRQ_HANDLED && ret != IRQ_NONE) {
+ if (!count)
+ return;
+ count--;
printk("irq%u: bogus retval mask %x\n", irq, ret);
} else {
+ desc->irqs_unhandled++;
+ if (desc->irqs_unhandled <= 99900)
+ return;
+ desc->irqs_unhandled = 0;
printk("irq%u: nobody cared\n", irq);
}
show_regs(regs);
diff --git a/arch/arm/lib/delay.S b/arch/arm/lib/delay.S
index b3fb475..9183b06 100644
--- a/arch/arm/lib/delay.S
+++ b/arch/arm/lib/delay.S
@@ -9,28 +9,32 @@
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
+#include <asm/param.h>
.text
.LC0: .word loops_per_jiffy
+.LC1: .word (2199023*HZ)>>11
/*
- * 0 <= r0 <= 2000
+ * r0 <= 2000
+ * lpj <= 0x01ffffff (max. 3355 bogomips)
+ * HZ <= 1000
*/
+
ENTRY(__udelay)
- mov r2, #0x6800
- orr r2, r2, #0x00db
+ ldr r2, .LC1
mul r0, r2, r0
-ENTRY(__const_udelay) @ 0 <= r0 <= 0x01ffffff
+ENTRY(__const_udelay) @ 0 <= r0 <= 0x7fffff06
ldr r2, .LC0
- ldr r2, [r2] @ max = 0x0fffffff
- mov r0, r0, lsr #11 @ max = 0x00003fff
- mov r2, r2, lsr #11 @ max = 0x0003ffff
+ ldr r2, [r2] @ max = 0x01ffffff
+ mov r0, r0, lsr #14 @ max = 0x0001ffff
+ mov r2, r2, lsr #10 @ max = 0x00007fff
mul r0, r2, r0 @ max = 2^32-1
movs r0, r0, lsr #6
RETINSTR(moveq,pc,lr)
/*
- * loops = (r0 * 0x10c6 * 100 * loops_per_jiffy) / 2^32
+ * loops = r0 * HZ * loops_per_jiffy / 1000000
*
* Oh, if only we had a cycle counter...
*/
diff --git a/arch/arm/lib/io-acorn.S b/arch/arm/lib/io-acorn.S
index b153523..1b197ea 100644
--- a/arch/arm/lib/io-acorn.S
+++ b/arch/arm/lib/io-acorn.S
@@ -12,7 +12,6 @@
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
-#include <asm/hardware.h>
.text
.align
diff --git a/arch/arm/mach-at91rm9200/clock.c b/arch/arm/mach-at91rm9200/clock.c
index ec8195a..8b95467 100644
--- a/arch/arm/mach-at91rm9200/clock.c
+++ b/arch/arm/mach-at91rm9200/clock.c
@@ -201,6 +201,54 @@
.pmc_mask = 1 << AT91_ID_UHP,
.mode = pmc_periph_mode,
};
+static struct clk ether_clk = {
+ .name = "ether_clk",
+ .parent = &mck,
+ .pmc_mask = 1 << AT91_ID_EMAC,
+ .mode = pmc_periph_mode,
+};
+static struct clk mmc_clk = {
+ .name = "mci_clk",
+ .parent = &mck,
+ .pmc_mask = 1 << AT91_ID_MCI,
+ .mode = pmc_periph_mode,
+};
+static struct clk twi_clk = {
+ .name = "twi_clk",
+ .parent = &mck,
+ .pmc_mask = 1 << AT91_ID_TWI,
+ .mode = pmc_periph_mode,
+};
+static struct clk usart0_clk = {
+ .name = "usart0_clk",
+ .parent = &mck,
+ .pmc_mask = 1 << AT91_ID_US0,
+ .mode = pmc_periph_mode,
+};
+static struct clk usart1_clk = {
+ .name = "usart1_clk",
+ .parent = &mck,
+ .pmc_mask = 1 << AT91_ID_US1,
+ .mode = pmc_periph_mode,
+};
+static struct clk usart2_clk = {
+ .name = "usart2_clk",
+ .parent = &mck,
+ .pmc_mask = 1 << AT91_ID_US2,
+ .mode = pmc_periph_mode,
+};
+static struct clk usart3_clk = {
+ .name = "usart3_clk",
+ .parent = &mck,
+ .pmc_mask = 1 << AT91_ID_US3,
+ .mode = pmc_periph_mode,
+};
+static struct clk spi_clk = {
+ .name = "spi0_clk",
+ .parent = &mck,
+ .pmc_mask = 1 << AT91_ID_SPI,
+ .mode = pmc_periph_mode,
+};
static struct clk *const clock_list[] = {
/* four primary clocks -- MUST BE FIRST! */
@@ -223,15 +271,18 @@
/* MCK and peripherals */
&mck,
- // usart0..usart3
- // mmc
+ &usart0_clk,
+ &usart1_clk,
+ &usart2_clk,
+ &usart3_clk,
+ &mmc_clk,
&udc_clk,
- // i2c
- // spi
+ &twi_clk,
+ &spi_clk,
// ssc0..ssc2
// tc0..tc5
&ohci_clk,
- // ether
+ ðer_clk,
};
@@ -360,7 +411,7 @@
u32 pckr;
pckr = at91_sys_read(AT91_PMC_PCKR(clk->id));
- pckr &= 0x03;
+ pckr &= AT91_PMC_CSS_PLLB; /* clock selection */
pckr |= prescale << 2;
at91_sys_write(AT91_PMC_PCKR(clk->id), pckr);
clk->rate_hz = actual;
@@ -440,7 +491,7 @@
else
state = "";
- seq_printf(s, "%-10s users=%d %-3s %9ld Hz %s\n",
+ seq_printf(s, "%-10s users=%2d %-3s %9ld Hz %s\n",
clk->name, clk->users, state, clk_get_rate(clk),
clk->parent ? clk->parent->name : "");
}
@@ -483,11 +534,18 @@
freq *= mul + 1;
} else
freq = 0;
- if (pll == &pllb && (reg & (1 << 28)))
- freq /= 2;
+
return freq;
}
+static u32 __init at91_usb_rate(struct clk *pll, u32 freq, u32 reg)
+{
+ if (pll == &pllb && (reg & AT91_PMC_USB96M))
+ return freq / 2;
+ else
+ return freq;
+}
+
static unsigned __init at91_pll_calc(unsigned main_freq, unsigned out_freq)
{
unsigned i, div = 0, mul = 0, diff = 1 << 30;
@@ -550,8 +608,8 @@
if (!main_clock) {
do {
tmp = at91_sys_read(AT91_CKGR_MCFR);
- } while (!(tmp & 0x10000));
- main_clock = (tmp & 0xffff) * (AT91_SLOW_CLOCK / 16);
+ } while (!(tmp & AT91_PMC_MAINRDY));
+ main_clock = (tmp & AT91_PMC_MAINF) * (AT91_SLOW_CLOCK / 16);
}
main_clk.rate_hz = main_clock;
@@ -566,13 +624,16 @@
*
* REVISIT: assumes MCK doesn't derive from PLLB!
*/
- at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2) | 0x10000000;
+ at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2) | AT91_PMC_USB96M;
pllb.rate_hz = at91_pll_rate(&pllb, main_clock, at91_pllb_usb_init);
at91_sys_write(AT91_PMC_PCDR, (1 << AT91_ID_UHP) | (1 << AT91_ID_UDP));
at91_sys_write(AT91_PMC_SCDR, AT91_PMC_UHP | AT91_PMC_UDP);
at91_sys_write(AT91_CKGR_PLLBR, 0);
at91_sys_write(AT91_PMC_SCER, AT91_PMC_MCKUDP);
+ udpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
+ uhpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
+
/*
* MCK and CPU derive from one of those primary clocks.
* For now, assume this parentage won't change.
diff --git a/arch/arm/mach-at91rm9200/gpio.c b/arch/arm/mach-at91rm9200/gpio.c
index 0e396fe..5ab4627 100644
--- a/arch/arm/mach-at91rm9200/gpio.c
+++ b/arch/arm/mach-at91rm9200/gpio.c
@@ -261,7 +261,7 @@
void __iomem *pio;
u32 isr;
- pio = (void __force __iomem *) desc->chipdata;
+ pio = desc->base;
/* temporarily mask (level sensitive) parent IRQ */
desc->chip->ack(irq);
@@ -312,7 +312,7 @@
__raw_writel(~0, controller + PIO_IDR);
set_irq_data(id, (void *) pin);
- set_irq_chipdata(id, (void __force *) controller);
+ set_irq_chipdata(id, controller);
for (i = 0; i < 32; i++, pin++) {
set_irq_chip(pin, &gpio_irqchip);
diff --git a/arch/arm/mach-at91rm9200/time.c b/arch/arm/mach-at91rm9200/time.c
index 1b6dd2d..7ffcf44 100644
--- a/arch/arm/mach-at91rm9200/time.c
+++ b/arch/arm/mach-at91rm9200/time.c
@@ -71,11 +71,11 @@
if (at91_sys_read(AT91_ST_SR) & AT91_ST_PITS) { /* This is a shared interrupt */
write_seqlock(&xtime_lock);
- do {
+ while (((read_CRTR() - at91_sys_read(AT91_ST_RTAR)) & AT91_ST_ALMV) >= LATCH) {
timer_tick(regs);
rtar = (at91_sys_read(AT91_ST_RTAR) + LATCH) & AT91_ST_ALMV;
at91_sys_write(AT91_ST_RTAR, rtar);
- } while (((read_CRTR() - at91_sys_read(AT91_ST_RTAR)) & AT91_ST_ALMV) >= LATCH);
+ }
write_sequnlock(&xtime_lock);
diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig
new file mode 100644
index 0000000..cec5a21
--- /dev/null
+++ b/arch/arm/mach-ep93xx/Kconfig
@@ -0,0 +1,21 @@
+if ARCH_EP93XX
+
+menu "Cirrus EP93xx Implementation Options"
+
+comment "EP93xx Platforms"
+
+config MACH_GESBC9312
+ bool "Support Glomation GESBC-9312-sx"
+ help
+ Say 'Y' here if you want your kernel to support the Glomation
+ GESBC-9312-sx board.
+
+config MACH_TS72XX
+ bool "Support Technologic Systems TS-72xx SBC"
+ help
+ Say 'Y' here if you want your kernel to support the
+ Technologic Systems TS-72xx board.
+
+endmenu
+
+endif
diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile
new file mode 100644
index 0000000..5393af9
--- /dev/null
+++ b/arch/arm/mach-ep93xx/Makefile
@@ -0,0 +1,10 @@
+#
+# Makefile for the linux kernel.
+#
+obj-y := core.o
+obj-m :=
+obj-n :=
+obj- :=
+
+obj-$(CONFIG_MACH_GESBC9312) += gesbc9312.o
+obj-$(CONFIG_MACH_TS72XX) += ts72xx.o
diff --git a/arch/arm/mach-ep93xx/Makefile.boot b/arch/arm/mach-ep93xx/Makefile.boot
new file mode 100644
index 0000000..d5561ad
--- /dev/null
+++ b/arch/arm/mach-ep93xx/Makefile.boot
@@ -0,0 +1,2 @@
+ zreladdr-y := 0x00008000
+params_phys-y := 0x00000100
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
new file mode 100644
index 0000000..865427b
--- /dev/null
+++ b/arch/arm/mach-ep93xx/core.c
@@ -0,0 +1,374 @@
+/*
+ * arch/arm/mach-ep93xx/core.c
+ * Core routines for Cirrus EP93xx chips.
+ *
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ *
+ * Thanks go to Michael Burian and Ray Lehtiniemi for their key
+ * role in the ep93xx linux community.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/serial.h>
+#include <linux/tty.h>
+#include <linux/bitops.h>
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
+#include <linux/serial_core.h>
+#include <linux/device.h>
+#include <linux/mm.h>
+#include <linux/time.h>
+#include <linux/timex.h>
+#include <linux/delay.h>
+#include <linux/amba/bus.h>
+
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/system.h>
+#include <asm/tlbflush.h>
+#include <asm/pgtable.h>
+#include <asm/io.h>
+
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+#include <asm/mach/irq.h>
+#include <asm/arch/gpio.h>
+
+#include <asm/hardware/vic.h>
+
+
+/*************************************************************************
+ * Static I/O mappings that are needed for all EP93xx platforms
+ *************************************************************************/
+static struct map_desc ep93xx_io_desc[] __initdata = {
+ {
+ .virtual = EP93XX_AHB_VIRT_BASE,
+ .pfn = __phys_to_pfn(EP93XX_AHB_PHYS_BASE),
+ .length = EP93XX_AHB_SIZE,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = EP93XX_APB_VIRT_BASE,
+ .pfn = __phys_to_pfn(EP93XX_APB_PHYS_BASE),
+ .length = EP93XX_APB_SIZE,
+ .type = MT_DEVICE,
+ },
+};
+
+void __init ep93xx_map_io(void)
+{
+ iotable_init(ep93xx_io_desc, ARRAY_SIZE(ep93xx_io_desc));
+}
+
+
+/*************************************************************************
+ * Timer handling for EP93xx
+ *************************************************************************
+ * The ep93xx has four internal timers. Timers 1, 2 (both 16 bit) and
+ * 3 (32 bit) count down at 508 kHz, are self-reloading, and can generate
+ * an interrupt on underflow. Timer 4 (40 bit) counts down at 983.04 kHz,
+ * is free-running, and can't generate interrupts.
+ *
+ * The 508 kHz timers are ideal for use for the timer interrupt, as the
+ * most common values of HZ divide 508 kHz nicely. We pick one of the 16
+ * bit timers (timer 1) since we don't need more than 16 bits of reload
+ * value as long as HZ >= 8.
+ *
+ * The higher clock rate of timer 4 makes it a better choice than the
+ * other timers for use in gettimeoffset(), while the fact that it can't
+ * generate interrupts means we don't have to worry about not being able
+ * to use this timer for something else. We also use timer 4 for keeping
+ * track of lost jiffies.
+ */
+static unsigned int last_jiffy_time;
+
+#define TIMER4_TICKS_PER_JIFFY ((CLOCK_TICK_RATE + (HZ/2)) / HZ)
+
+static int ep93xx_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ write_seqlock(&xtime_lock);
+
+ __raw_writel(1, EP93XX_TIMER1_CLEAR);
+ while (__raw_readl(EP93XX_TIMER4_VALUE_LOW) - last_jiffy_time
+ >= TIMER4_TICKS_PER_JIFFY) {
+ last_jiffy_time += TIMER4_TICKS_PER_JIFFY;
+ timer_tick(regs);
+ }
+
+ write_sequnlock(&xtime_lock);
+
+ return IRQ_HANDLED;
+}
+
+static struct irqaction ep93xx_timer_irq = {
+ .name = "ep93xx timer",
+ .flags = SA_INTERRUPT | SA_TIMER,
+ .handler = ep93xx_timer_interrupt,
+};
+
+static void __init ep93xx_timer_init(void)
+{
+ /* Enable periodic HZ timer. */
+ __raw_writel(0x48, EP93XX_TIMER1_CONTROL);
+ __raw_writel((508000 / HZ) - 1, EP93XX_TIMER1_LOAD);
+ __raw_writel(0xc8, EP93XX_TIMER1_CONTROL);
+
+ /* Enable lost jiffy timer. */
+ __raw_writel(0x100, EP93XX_TIMER4_VALUE_HIGH);
+
+ setup_irq(IRQ_EP93XX_TIMER1, &ep93xx_timer_irq);
+}
+
+static unsigned long ep93xx_gettimeoffset(void)
+{
+ int offset;
+
+ offset = __raw_readl(EP93XX_TIMER4_VALUE_LOW) - last_jiffy_time;
+
+ /* Calculate (1000000 / 983040) * offset. */
+ return offset + (53 * offset / 3072);
+}
+
+struct sys_timer ep93xx_timer = {
+ .init = ep93xx_timer_init,
+ .offset = ep93xx_gettimeoffset,
+};
+
+
+/*************************************************************************
+ * GPIO handling for EP93xx
+ *************************************************************************/
+static unsigned char gpio_int_enable[2];
+static unsigned char gpio_int_type1[2];
+static unsigned char gpio_int_type2[2];
+
+static void update_gpio_ab_int_params(int port)
+{
+ if (port == 0) {
+ __raw_writeb(0, EP93XX_GPIO_A_INT_ENABLE);
+ __raw_writeb(gpio_int_type2[0], EP93XX_GPIO_A_INT_TYPE2);
+ __raw_writeb(gpio_int_type1[0], EP93XX_GPIO_A_INT_TYPE1);
+ __raw_writeb(gpio_int_enable[0], EP93XX_GPIO_A_INT_ENABLE);
+ } else if (port == 1) {
+ __raw_writeb(0, EP93XX_GPIO_B_INT_ENABLE);
+ __raw_writeb(gpio_int_type2[1], EP93XX_GPIO_B_INT_TYPE2);
+ __raw_writeb(gpio_int_type1[1], EP93XX_GPIO_B_INT_TYPE1);
+ __raw_writeb(gpio_int_enable[1], EP93XX_GPIO_B_INT_ENABLE);
+ }
+}
+
+
+static unsigned char data_register_offset[8] = {
+ 0x00, 0x04, 0x08, 0x0c, 0x20, 0x30, 0x38, 0x40,
+};
+
+static unsigned char data_direction_register_offset[8] = {
+ 0x10, 0x14, 0x18, 0x1c, 0x24, 0x34, 0x3c, 0x44,
+};
+
+void gpio_line_config(int line, int direction)
+{
+ unsigned int data_direction_register;
+ unsigned long flags;
+ unsigned char v;
+
+ data_direction_register =
+ EP93XX_GPIO_REG(data_direction_register_offset[line >> 3]);
+
+ local_irq_save(flags);
+ if (direction == GPIO_OUT) {
+ if (line >= 0 && line < 16) {
+ gpio_int_enable[line >> 3] &= ~(1 << (line & 7));
+ update_gpio_ab_int_params(line >> 3);
+ }
+
+ v = __raw_readb(data_direction_register);
+ v |= 1 << (line & 7);
+ __raw_writeb(v, data_direction_register);
+ } else if (direction == GPIO_IN) {
+ v = __raw_readb(data_direction_register);
+ v &= ~(1 << (line & 7));
+ __raw_writeb(v, data_direction_register);
+ }
+ local_irq_restore(flags);
+}
+EXPORT_SYMBOL(gpio_line_config);
+
+int gpio_line_get(int line)
+{
+ unsigned int data_register;
+
+ data_register = EP93XX_GPIO_REG(data_register_offset[line >> 3]);
+
+ return !!(__raw_readb(data_register) & (1 << (line & 7)));
+}
+EXPORT_SYMBOL(gpio_line_get);
+
+void gpio_line_set(int line, int value)
+{
+ unsigned int data_register;
+ unsigned long flags;
+ unsigned char v;
+
+ data_register = EP93XX_GPIO_REG(data_register_offset[line >> 3]);
+
+ local_irq_save(flags);
+ if (value == EP93XX_GPIO_HIGH) {
+ v = __raw_readb(data_register);
+ v |= 1 << (line & 7);
+ __raw_writeb(v, data_register);
+ } else if (value == EP93XX_GPIO_LOW) {
+ v = __raw_readb(data_register);
+ v &= ~(1 << (line & 7));
+ __raw_writeb(v, data_register);
+ }
+ local_irq_restore(flags);
+}
+EXPORT_SYMBOL(gpio_line_set);
+
+
+/*************************************************************************
+ * EP93xx IRQ handling
+ *************************************************************************/
+static void ep93xx_gpio_ab_irq_handler(unsigned int irq,
+ struct irqdesc *desc, struct pt_regs *regs)
+{
+ unsigned char status;
+ int i;
+
+ status = __raw_readb(EP93XX_GPIO_A_INT_STATUS);
+ for (i = 0; i < 8; i++) {
+ if (status & (1 << i)) {
+ desc = irq_desc + IRQ_EP93XX_GPIO(0) + i;
+ desc_handle_irq(IRQ_EP93XX_GPIO(0) + i, desc, regs);
+ }
+ }
+
+ status = __raw_readb(EP93XX_GPIO_B_INT_STATUS);
+ for (i = 0; i < 8; i++) {
+ if (status & (1 << i)) {
+ desc = irq_desc + IRQ_EP93XX_GPIO(8) + i;
+ desc_handle_irq(IRQ_EP93XX_GPIO(8) + i, desc, regs);
+ }
+ }
+}
+
+static void ep93xx_gpio_ab_irq_mask_ack(unsigned int irq)
+{
+ int line = irq - IRQ_EP93XX_GPIO(0);
+ int port = line >> 3;
+
+ gpio_int_enable[port] &= ~(1 << (line & 7));
+ update_gpio_ab_int_params(port);
+
+ if (line >> 3) {
+ __raw_writel(1 << (line & 7), EP93XX_GPIO_B_INT_ACK);
+ } else {
+ __raw_writel(1 << (line & 7), EP93XX_GPIO_A_INT_ACK);
+ }
+}
+
+static void ep93xx_gpio_ab_irq_mask(unsigned int irq)
+{
+ int line = irq - IRQ_EP93XX_GPIO(0);
+ int port = line >> 3;
+
+ gpio_int_enable[port] &= ~(1 << (line & 7));
+ update_gpio_ab_int_params(port);
+}
+
+static void ep93xx_gpio_ab_irq_unmask(unsigned int irq)
+{
+ int line = irq - IRQ_EP93XX_GPIO(0);
+ int port = line >> 3;
+
+ gpio_int_enable[port] |= 1 << (line & 7);
+ update_gpio_ab_int_params(port);
+}
+
+
+/*
+ * gpio_int_type1 controls whether the interrupt is level (0) or
+ * edge (1) triggered, while gpio_int_type2 controls whether it
+ * triggers on low/falling (0) or high/rising (1).
+ */
+static int ep93xx_gpio_ab_irq_type(unsigned int irq, unsigned int type)
+{
+ int port;
+ int line;
+
+ line = irq - IRQ_EP93XX_GPIO(0);
+ gpio_line_config(line, GPIO_IN);
+
+ port = line >> 3;
+ line &= 7;
+
+ if (type & IRQT_RISING) {
+ gpio_int_type1[port] |= 1 << line;
+ gpio_int_type2[port] |= 1 << line;
+ } else if (type & IRQT_FALLING) {
+ gpio_int_type1[port] |= 1 << line;
+ gpio_int_type2[port] &= ~(1 << line);
+ } else if (type & IRQT_HIGH) {
+ gpio_int_type1[port] &= ~(1 << line);
+ gpio_int_type2[port] |= 1 << line;
+ } else if (type & IRQT_LOW) {
+ gpio_int_type1[port] &= ~(1 << line);
+ gpio_int_type2[port] &= ~(1 << line);
+ }
+ update_gpio_ab_int_params(port);
+
+ return 0;
+}
+
+static struct irqchip ep93xx_gpio_ab_irq_chip = {
+ .ack = ep93xx_gpio_ab_irq_mask_ack,
+ .mask = ep93xx_gpio_ab_irq_mask,
+ .unmask = ep93xx_gpio_ab_irq_unmask,
+ .set_type = ep93xx_gpio_ab_irq_type,
+};
+
+
+void __init ep93xx_init_irq(void)
+{
+ int irq;
+
+ vic_init((void *)EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK);
+ vic_init((void *)EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK);
+
+ for (irq = IRQ_EP93XX_GPIO(0) ; irq <= IRQ_EP93XX_GPIO(15); irq++) {
+ set_irq_chip(irq, &ep93xx_gpio_ab_irq_chip);
+ set_irq_handler(irq, do_level_IRQ);
+ set_irq_flags(irq, IRQF_VALID);
+ }
+ set_irq_chained_handler(IRQ_EP93XX_GPIO_AB, ep93xx_gpio_ab_irq_handler);
+}
+
+
+/*************************************************************************
+ * EP93xx peripheral handling
+ *************************************************************************/
+void __init ep93xx_init_devices(void)
+{
+ unsigned int v;
+
+ /*
+ * Disallow access to MaverickCrunch initially.
+ */
+ v = __raw_readl(EP93XX_SYSCON_DEVICE_CONFIG);
+ v &= ~EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE;
+ __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
+ __raw_writel(v, EP93XX_SYSCON_DEVICE_CONFIG);
+}
diff --git a/arch/arm/mach-ep93xx/gesbc9312.c b/arch/arm/mach-ep93xx/gesbc9312.c
new file mode 100644
index 0000000..d18fcb1
--- /dev/null
+++ b/arch/arm/mach-ep93xx/gesbc9312.c
@@ -0,0 +1,40 @@
+/*
+ * arch/arm/mach-ep93xx/gesbc9312.c
+ * Glomation GESBC-9312-sx support.
+ *
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/mtd/physmap.h>
+#include <asm/io.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+static void __init gesbc9312_init_machine(void)
+{
+ ep93xx_init_devices();
+ physmap_configure(0x60000000, 0x00800000, 4, NULL);
+}
+
+MACHINE_START(GESBC9312, "Glomation GESBC-9312-sx")
+ /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
+ .phys_io = EP93XX_APB_PHYS_BASE,
+ .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = 0x00000100,
+ .map_io = ep93xx_map_io,
+ .init_irq = ep93xx_init_irq,
+ .timer = &ep93xx_timer,
+ .init_machine = gesbc9312_init_machine,
+MACHINE_END
diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
new file mode 100644
index 0000000..777e75d
--- /dev/null
+++ b/arch/arm/mach-ep93xx/ts72xx.c
@@ -0,0 +1,118 @@
+/*
+ * arch/arm/mach-ep93xx/ts72xx.c
+ * Technologic Systems TS72xx SBC support.
+ *
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/mtd/physmap.h>
+#include <asm/io.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+static struct map_desc ts72xx_io_desc[] __initdata = {
+ {
+ .virtual = TS72XX_MODEL_VIRT_BASE,
+ .pfn = __phys_to_pfn(TS72XX_MODEL_PHYS_BASE),
+ .length = TS72XX_MODEL_SIZE,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = TS72XX_OPTIONS_VIRT_BASE,
+ .pfn = __phys_to_pfn(TS72XX_OPTIONS_PHYS_BASE),
+ .length = TS72XX_OPTIONS_SIZE,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = TS72XX_OPTIONS2_VIRT_BASE,
+ .pfn = __phys_to_pfn(TS72XX_OPTIONS2_PHYS_BASE),
+ .length = TS72XX_OPTIONS2_SIZE,
+ .type = MT_DEVICE,
+ }
+};
+
+static struct map_desc ts72xx_nand_io_desc[] __initdata = {
+ {
+ .virtual = TS72XX_NAND_DATA_VIRT_BASE,
+ .pfn = __phys_to_pfn(TS72XX_NAND1_DATA_PHYS_BASE),
+ .length = TS72XX_NAND_DATA_SIZE,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = TS72XX_NAND_CONTROL_VIRT_BASE,
+ .pfn = __phys_to_pfn(TS72XX_NAND1_CONTROL_PHYS_BASE),
+ .length = TS72XX_NAND_CONTROL_SIZE,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = TS72XX_NAND_BUSY_VIRT_BASE,
+ .pfn = __phys_to_pfn(TS72XX_NAND1_BUSY_PHYS_BASE),
+ .length = TS72XX_NAND_BUSY_SIZE,
+ .type = MT_DEVICE,
+ }
+};
+
+static struct map_desc ts72xx_alternate_nand_io_desc[] __initdata = {
+ {
+ .virtual = TS72XX_NAND_DATA_VIRT_BASE,
+ .pfn = __phys_to_pfn(TS72XX_NAND2_DATA_PHYS_BASE),
+ .length = TS72XX_NAND_DATA_SIZE,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = TS72XX_NAND_CONTROL_VIRT_BASE,
+ .pfn = __phys_to_pfn(TS72XX_NAND2_CONTROL_PHYS_BASE),
+ .length = TS72XX_NAND_CONTROL_SIZE,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = TS72XX_NAND_BUSY_VIRT_BASE,
+ .pfn = __phys_to_pfn(TS72XX_NAND2_BUSY_PHYS_BASE),
+ .length = TS72XX_NAND_BUSY_SIZE,
+ .type = MT_DEVICE,
+ }
+};
+
+static void __init ts72xx_map_io(void)
+{
+ ep93xx_map_io();
+ iotable_init(ts72xx_io_desc, ARRAY_SIZE(ts72xx_io_desc));
+
+ /*
+ * The TS-7200 has NOR flash, the other models have NAND flash.
+ */
+ if (!board_is_ts7200()) {
+ if (is_ts9420_installed()) {
+ iotable_init(ts72xx_alternate_nand_io_desc,
+ ARRAY_SIZE(ts72xx_alternate_nand_io_desc));
+ } else {
+ iotable_init(ts72xx_nand_io_desc,
+ ARRAY_SIZE(ts72xx_nand_io_desc));
+ }
+ }
+}
+
+static void __init ts72xx_init_machine(void)
+{
+ ep93xx_init_devices();
+ if (board_is_ts7200())
+ physmap_configure(TS72XX_NOR_PHYS_BASE, 0x01000000, 1, NULL);
+}
+
+MACHINE_START(TS72XX, "Technologic Systems TS-72xx SBC")
+ /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
+ .phys_io = EP93XX_APB_PHYS_BASE,
+ .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = 0x00000100,
+ .map_io = ts72xx_map_io,
+ .init_irq = ep93xx_init_irq,
+ .timer = &ep93xx_timer,
+ .init_machine = ts72xx_init_machine,
+MACHINE_END
diff --git a/arch/arm/mach-footbridge/dc21285.c b/arch/arm/mach-footbridge/dc21285.c
index e79884ee..5dace25 100644
--- a/arch/arm/mach-footbridge/dc21285.c
+++ b/arch/arm/mach-footbridge/dc21285.c
@@ -255,14 +255,12 @@
if (nr || !footbridge_cfn_mode())
return 0;
- res = kmalloc(sizeof(struct resource) * 2, GFP_KERNEL);
+ res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL);
if (!res) {
printk("out of memory for root bus resources");
return 0;
}
- memset(res, 0, sizeof(struct resource) * 2);
-
res[0].flags = IORESOURCE_MEM;
res[0].name = "Footbridge non-prefetch";
res[1].flags = IORESOURCE_MEM | IORESOURCE_PREFETCH;
diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c
index a85d471..92d79fb 100644
--- a/arch/arm/mach-integrator/impd1.c
+++ b/arch/arm/mach-integrator/impd1.c
@@ -355,12 +355,11 @@
if (!request_mem_region(dev->resource.start, SZ_4K, "LM registers"))
return -EBUSY;
- impd1 = kmalloc(sizeof(struct impd1_module), GFP_KERNEL);
+ impd1 = kzalloc(sizeof(struct impd1_module), GFP_KERNEL);
if (!impd1) {
ret = -ENOMEM;
goto release_lm;
}
- memset(impd1, 0, sizeof(struct impd1_module));
impd1->base = ioremap(dev->resource.start, SZ_4K);
if (!impd1->base) {
@@ -389,12 +388,10 @@
pc_base = dev->resource.start + idev->offset;
- d = kmalloc(sizeof(struct amba_device), GFP_KERNEL);
+ d = kzalloc(sizeof(struct amba_device), GFP_KERNEL);
if (!d)
continue;
- memset(d, 0, sizeof(struct amba_device));
-
snprintf(d->dev.bus_id, sizeof(d->dev.bus_id),
"lm%x:%5.5lx", dev->id, idev->offset >> 12);
diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index d8d3c2a..6d65c96 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -319,12 +319,10 @@
if ((sc_dec & (16 << i)) == 0)
continue;
- lmdev = kmalloc(sizeof(struct lm_device), GFP_KERNEL);
+ lmdev = kzalloc(sizeof(struct lm_device), GFP_KERNEL);
if (!lmdev)
continue;
- memset(lmdev, 0, sizeof(struct lm_device));
-
lmdev->resource.start = 0xc0000000 + 0x10000000 * i;
lmdev->resource.end = lmdev->resource.start + 0x0fffffff;
lmdev->resource.flags = IORESOURCE_MEM;
diff --git a/arch/arm/mach-iop3xx/iq31244-pci.c b/arch/arm/mach-iop3xx/iq31244-pci.c
index c6a973b..f3c6413 100644
--- a/arch/arm/mach-iop3xx/iq31244-pci.c
+++ b/arch/arm/mach-iop3xx/iq31244-pci.c
@@ -74,12 +74,10 @@
if(nr != 0)
return 0;
- res = kmalloc(sizeof(struct resource) * 2, GFP_KERNEL);
+ res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL);
if (!res)
panic("PCI: unable to alloc resources");
- memset(res, 0, sizeof(struct resource) * 2);
-
res[0].start = IOP321_PCI_LOWER_IO_VA;
res[0].end = IOP321_PCI_UPPER_IO_VA;
res[0].name = "IQ31244 PCI I/O Space";
diff --git a/arch/arm/mach-iop3xx/iq80321-pci.c b/arch/arm/mach-iop3xx/iq80321-pci.c
index 802f6d0..d9758d3 100644
--- a/arch/arm/mach-iop3xx/iq80321-pci.c
+++ b/arch/arm/mach-iop3xx/iq80321-pci.c
@@ -68,12 +68,10 @@
if(nr != 0)
return 0;
- res = kmalloc(sizeof(struct resource) * 2, GFP_KERNEL);
+ res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL);
if (!res)
panic("PCI: unable to alloc resources");
- memset(res, 0, sizeof(struct resource) * 2);
-
res[0].start = IOP321_PCI_LOWER_IO_VA;
res[0].end = IOP321_PCI_UPPER_IO_VA;
res[0].name = "IQ80321 PCI I/O Space";
diff --git a/arch/arm/mach-iop3xx/iq80331-pci.c b/arch/arm/mach-iop3xx/iq80331-pci.c
index 654e450a..40d8610 100644
--- a/arch/arm/mach-iop3xx/iq80331-pci.c
+++ b/arch/arm/mach-iop3xx/iq80331-pci.c
@@ -64,12 +64,10 @@
if(nr != 0)
return 0;
- res = kmalloc(sizeof(struct resource) * 2, GFP_KERNEL);
+ res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL);
if (!res)
panic("PCI: unable to alloc resources");
- memset(res, 0, sizeof(struct resource) * 2);
-
res[0].start = IOP331_PCI_LOWER_IO_VA;
res[0].end = IOP331_PCI_UPPER_IO_VA;
res[0].name = "IQ80331 PCI I/O Space";
diff --git a/arch/arm/mach-iop3xx/iq80332-pci.c b/arch/arm/mach-iop3xx/iq80332-pci.c
index 65951ff..afc0676 100644
--- a/arch/arm/mach-iop3xx/iq80332-pci.c
+++ b/arch/arm/mach-iop3xx/iq80332-pci.c
@@ -70,12 +70,10 @@
if(nr != 0)
return 0;
- res = kmalloc(sizeof(struct resource) * 2, GFP_KERNEL);
+ res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL);
if (!res)
panic("PCI: unable to alloc resources");
- memset(res, 0, sizeof(struct resource) * 2);
-
res[0].start = IOP331_PCI_LOWER_IO_VA;
res[0].end = IOP331_PCI_UPPER_IO_VA;
res[0].name = "IQ80332 PCI I/O Space";
diff --git a/arch/arm/mach-ixp2000/Kconfig b/arch/arm/mach-ixp2000/Kconfig
index ecb58d8..86f53f8 100644
--- a/arch/arm/mach-ixp2000/Kconfig
+++ b/arch/arm/mach-ixp2000/Kconfig
@@ -43,12 +43,17 @@
this platform, see <file:Documentation/arm/IXP2000>.
config ARCH_IXDP2801
- bool "Support Intel IXDP2801"
+ bool "Support Intel IXDP2801 and IXDP28x5"
help
Say 'Y' here if you want your kernel to support the Intel
- IXDP2801 reference platform. For more information on
+ IXDP2801/2805/2855 reference platforms. For more information on
this platform, see <file:Documentation/arm/IXP2000>.
+config MACH_IXDP28X5
+ bool
+ depends on ARCH_IXDP2801
+ default y
+
config ARCH_IXDP2X01
bool
depends on ARCH_IXDP2401 || ARCH_IXDP2801
diff --git a/arch/arm/mach-ixp2000/Makefile b/arch/arm/mach-ixp2000/Makefile
index 9621aeb..1e6139d 100644
--- a/arch/arm/mach-ixp2000/Makefile
+++ b/arch/arm/mach-ixp2000/Makefile
@@ -1,7 +1,7 @@
#
# Makefile for the linux kernel.
#
-obj-y := core.o pci.o uengine.o
+obj-y := core.o pci.o
obj-m :=
obj-n :=
obj- :=
diff --git a/arch/arm/mach-ixp2000/core.c b/arch/arm/mach-ixp2000/core.c
index cfd5bef..6e8d504 100644
--- a/arch/arm/mach-ixp2000/core.c
+++ b/arch/arm/mach-ixp2000/core.c
@@ -288,8 +288,6 @@
local_irq_save(flags);
if (direction == GPIO_OUT) {
- irq_desc[line + IRQ_IXP2000_GPIO0].valid = 0;
-
/* if it's an output, it ain't an interrupt anymore */
GPIO_IRQ_falling_edge &= ~(1 << line);
GPIO_IRQ_rising_edge &= ~(1 << line);
@@ -351,11 +349,6 @@
GPIO_IRQ_level_high &= ~(1 << line);
update_gpio_int_csrs();
- /*
- * Finally, mark the corresponding IRQ as valid.
- */
- irq_desc[irq].valid = 1;
-
return 0;
}
@@ -506,14 +499,10 @@
}
set_irq_chained_handler(IRQ_IXP2000_ERRSUM, ixp2000_err_irq_handler);
- /*
- * GPIO IRQs are invalid until someone sets the interrupt mode
- * by calling set_irq_type().
- */
for (irq = IRQ_IXP2000_GPIO0; irq <= IRQ_IXP2000_GPIO7; irq++) {
set_irq_chip(irq, &ixp2000_GPIO_irq_chip);
set_irq_handler(irq, do_level_IRQ);
- set_irq_flags(irq, 0);
+ set_irq_flags(irq, IRQF_VALID);
}
set_irq_chained_handler(IRQ_IXP2000_GPIO, ixp2000_GPIO_irq_handler);
diff --git a/arch/arm/mach-ixp2000/ixdp2x01.c b/arch/arm/mach-ixp2000/ixdp2x01.c
index 150519f..f9d4968 100644
--- a/arch/arm/mach-ixp2000/ixdp2x01.c
+++ b/arch/arm/mach-ixp2000/ixdp2x01.c
@@ -284,7 +284,7 @@
{
sys->mem_offset = 0xe0000000;
- if (machine_is_ixdp2801())
+ if (machine_is_ixdp2801() || machine_is_ixdp28x5())
sys->mem_offset -= ((*IXP2000_PCI_ADDR_EXT & 0xE000) << 16);
return ixp2000_pci_setup(nr, sys);
@@ -300,7 +300,8 @@
int __init ixdp2x01_pci_init(void)
{
- if (machine_is_ixdp2401() || machine_is_ixdp2801())
+ if (machine_is_ixdp2401() || machine_is_ixdp2801() ||\
+ machine_is_ixdp28x5())
pci_common_init(&ixdp2x01_pci);
return 0;
@@ -400,6 +401,21 @@
.timer = &ixdp2x01_timer,
.init_machine = ixdp2x01_init_machine,
MACHINE_END
+
+/*
+ * IXDP28x5 is basically an IXDP2801 with a different CPU but Intel
+ * changed the machine ID in the bootloader
+ */
+MACHINE_START(IXDP28X5, "Intel IXDP2805/2855 Development Platform")
+ /* Maintainer: MontaVista Software, Inc. */
+ .phys_io = IXP2000_UART_PHYS_BASE,
+ .io_pg_offst = ((IXP2000_UART_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = 0x00000100,
+ .map_io = ixdp2x01_map_io,
+ .init_irq = ixdp2x01_init_irq,
+ .timer = &ixdp2x01_timer,
+ .init_machine = ixdp2x01_init_machine,
+MACHINE_END
#endif
diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c
index 6e3462e..2d40fe1 100644
--- a/arch/arm/mach-ixp4xx/common-pci.c
+++ b/arch/arm/mach-ixp4xx/common-pci.c
@@ -463,7 +463,7 @@
if (nr >= 1)
return 0;
- res = kmalloc(sizeof(*res) * 2, GFP_KERNEL);
+ res = kzalloc(sizeof(*res) * 2, GFP_KERNEL);
if (res == NULL) {
/*
* If we're out of memory this early, something is wrong,
@@ -471,7 +471,6 @@
*/
panic("PCI: unable to allocate resources?\n");
}
- memset(res, 0, sizeof(*res) * 2);
local_write_config(PCI_COMMAND, 2, PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index fbadf30..a0888e1 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -91,7 +91,7 @@
/*
* IRQ -> GPIO mapping table
*/
-static int irq2gpio[32] = {
+static char irq2gpio[32] = {
-1, -1, -1, -1, -1, -1, 0, 1,
-1, -1, -1, -1, -1, -1, -1, -1,
-1, -1, -1, 2, 3, 4, 5, 6,
@@ -153,6 +153,9 @@
/* Set the new style */
*int_reg |= (int_style << (line * IXP4XX_GPIO_STYLE_SIZE));
+ /* Configure the line as an input */
+ gpio_line_config(line, IXP4XX_GPIO_IN);
+
return 0;
}
diff --git a/arch/arm/mach-lh7a40x/common.h b/arch/arm/mach-lh7a40x/common.h
index 578a524..ea8de7e 100644
--- a/arch/arm/mach-lh7a40x/common.h
+++ b/arch/arm/mach-lh7a40x/common.h
@@ -12,5 +12,6 @@
extern void lh7a400_init_irq (void);
extern void lh7a404_init_irq (void);
+extern void lh7a40x_init_board_irq (void);
#define IRQ_DISPATCH(irq) desc_handle_irq((irq),(irq_desc + irq), regs)
diff --git a/arch/arm/mach-lh7a40x/irq-kev7a400.c b/arch/arm/mach-lh7a40x/irq-kev7a400.c
index 691bb09..8535764 100644
--- a/arch/arm/mach-lh7a40x/irq-kev7a400.c
+++ b/arch/arm/mach-lh7a40x/irq-kev7a400.c
@@ -16,6 +16,7 @@
#include <asm/mach/hardware.h>
#include <asm/mach/irqs.h>
+#include "common.h"
/* KEV7a400 CPLD IRQ handling */
diff --git a/arch/arm/mach-lh7a40x/irq-lh7a400.c b/arch/arm/mach-lh7a40x/irq-lh7a400.c
index f334d81..f9fdefe 100644
--- a/arch/arm/mach-lh7a40x/irq-lh7a400.c
+++ b/arch/arm/mach-lh7a40x/irq-lh7a400.c
@@ -16,9 +16,9 @@
#include <asm/hardware.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
-#include <asm/arch/irq.h>
#include <asm/arch/irqs.h>
+#include "common.h"
/* CPU IRQ handling */
diff --git a/arch/arm/mach-lh7a40x/irq-lh7a404.c b/arch/arm/mach-lh7a40x/irq-lh7a404.c
index 122fada..e902e3d 100644
--- a/arch/arm/mach-lh7a40x/irq-lh7a404.c
+++ b/arch/arm/mach-lh7a40x/irq-lh7a404.c
@@ -16,9 +16,10 @@
#include <asm/hardware.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
-#include <asm/arch/irq.h>
#include <asm/arch/irqs.h>
+#include "common.h"
+
#define USE_PRIORITIES
/* See Documentation/arm/Sharp-LH/VectoredInterruptController for more
diff --git a/arch/arm/mach-lh7a40x/irq-lpd7a40x.c b/arch/arm/mach-lh7a40x/irq-lpd7a40x.c
index 6262d44..dcb4e17 100644
--- a/arch/arm/mach-lh7a40x/irq-lpd7a40x.c
+++ b/arch/arm/mach-lh7a40x/irq-lpd7a40x.c
@@ -19,6 +19,7 @@
#include <asm/mach/irq.h>
#include <asm/arch/irqs.h>
+#include "common.h"
static void lh7a40x_ack_cpld_irq (u32 irq)
{
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 32526a0..3826444 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -3,7 +3,7 @@
#
# Common support (must be linked before board specific support)
-obj-y += generic.o irq.o dma.o time.o
+obj-y += clock.o generic.o irq.o dma.o time.o
obj-$(CONFIG_PXA25x) += pxa25x.o
obj-$(CONFIG_PXA27x) += pxa27x.o
diff --git a/arch/arm/mach-pxa/clock.c b/arch/arm/mach-pxa/clock.c
new file mode 100644
index 0000000..8f7c90a
--- /dev/null
+++ b/arch/arm/mach-pxa/clock.c
@@ -0,0 +1,124 @@
+/*
+ * linux/arch/arm/mach-sa1100/clock.c
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/clk.h>
+#include <linux/spinlock.h>
+
+#include <asm/arch/pxa-regs.h>
+#include <asm/hardware.h>
+#include <asm/semaphore.h>
+
+struct clk {
+ struct list_head node;
+ unsigned long rate;
+ struct module *owner;
+ const char *name;
+ unsigned int enabled;
+ void (*enable)(void);
+ void (*disable)(void);
+};
+
+static LIST_HEAD(clocks);
+static DECLARE_MUTEX(clocks_sem);
+static DEFINE_SPINLOCK(clocks_lock);
+
+struct clk *clk_get(struct device *dev, const char *id)
+{
+ struct clk *p, *clk = ERR_PTR(-ENOENT);
+
+ down(&clocks_sem);
+ list_for_each_entry(p, &clocks, node) {
+ if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
+ clk = p;
+ break;
+ }
+ }
+ up(&clocks_sem);
+
+ return clk;
+}
+EXPORT_SYMBOL(clk_get);
+
+void clk_put(struct clk *clk)
+{
+ module_put(clk->owner);
+}
+EXPORT_SYMBOL(clk_put);
+
+int clk_enable(struct clk *clk)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&clocks_lock, flags);
+ if (clk->enabled++ == 0)
+ clk->enable();
+ spin_unlock_irqrestore(&clocks_lock, flags);
+ return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+ unsigned long flags;
+
+ WARN_ON(clk->enabled == 0);
+
+ spin_lock_irqsave(&clocks_lock, flags);
+ if (--clk->enabled == 0)
+ clk->disable();
+ spin_unlock_irqrestore(&clocks_lock, flags);
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+ return clk->rate;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+
+static void clk_gpio27_enable(void)
+{
+ pxa_gpio_mode(GPIO11_3_6MHz_MD);
+}
+
+static void clk_gpio27_disable(void)
+{
+}
+
+static struct clk clk_gpio27 = {
+ .name = "GPIO27_CLK",
+ .rate = 3686400,
+ .enable = clk_gpio27_enable,
+ .disable = clk_gpio27_disable,
+};
+
+int clk_register(struct clk *clk)
+{
+ down(&clocks_sem);
+ list_add(&clk->node, &clocks);
+ up(&clocks_sem);
+ return 0;
+}
+EXPORT_SYMBOL(clk_register);
+
+void clk_unregister(struct clk *clk)
+{
+ down(&clocks_sem);
+ list_del(&clk->node);
+ up(&clocks_sem);
+}
+EXPORT_SYMBOL(clk_unregister);
+
+static int __init clk_init(void)
+{
+ clk_register(&clk_gpio27);
+ return 0;
+}
+arch_initcall(clk_init);
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 7ffd2de..68923b1 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -32,7 +32,6 @@
#include <asm/mach/irq.h>
#include <asm/arch/pxa-regs.h>
-#include <asm/arch/irq.h>
#include <asm/arch/irda.h>
#include <asm/arch/mmc.h>
#include <asm/arch/udc.h>
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 911e6ff..b45560a 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -29,7 +29,6 @@
#include <asm/mach/irq.h>
#include <asm/arch/pxa-regs.h>
-#include <asm/arch/irq.h>
#include <asm/arch/mmc.h>
#include <asm/arch/udc.h>
#include <asm/arch/irda.h>
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index c094d99..30ec317 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -33,7 +33,6 @@
#include <asm/mach/irq.h>
#include <asm/arch/pxa-regs.h>
-#include <asm/arch/irq.h>
#include <asm/arch/irda.h>
#include <asm/arch/mmc.h>
#include <asm/arch/ohci.h>
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index d168286e..66ec717 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -34,7 +34,6 @@
#include <asm/mach/irq.h>
#include <asm/arch/pxa-regs.h>
-#include <asm/arch/irq.h>
#include <asm/arch/tosa.h>
#include <asm/hardware/scoop.h>
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index 0b9d7ca..ed07c41 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -9,6 +9,13 @@
Say Y gere if you are using the Simtec Electronics ANUBIS
development system
+config MACH_OSIRIS
+ bool "Simtec IM2440D20 (OSIRIS) module"
+ select CPU_S3C2440
+ help
+ Say Y here if you are using the Simtec IM2440D20 module, also
+ known as the Osiris.
+
config ARCH_BAST
bool "Simtec Electronics BAST (EB2410ITX)"
select CPU_S3C2410
diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile
index 1217bf0..1b3b476 100644
--- a/arch/arm/mach-s3c2410/Makefile
+++ b/arch/arm/mach-s3c2410/Makefile
@@ -38,6 +38,7 @@
# machine specific support
obj-$(CONFIG_MACH_ANUBIS) += mach-anubis.o
+obj-$(CONFIG_MACH_OSIRIS) += mach-osiris.o
obj-$(CONFIG_ARCH_BAST) += mach-bast.o usb-simtec.o
obj-$(CONFIG_ARCH_H1940) += mach-h1940.o
obj-$(CONFIG_MACH_N30) += mach-n30.o
diff --git a/arch/arm/mach-s3c2410/clock.c b/arch/arm/mach-s3c2410/clock.c
index 08489ef..fec02c9 100644
--- a/arch/arm/mach-s3c2410/clock.c
+++ b/arch/arm/mach-s3c2410/clock.c
@@ -38,12 +38,14 @@
#include <linux/ioport.h>
#include <linux/clk.h>
#include <linux/mutex.h>
+#include <linux/delay.h>
#include <asm/hardware.h>
#include <asm/irq.h>
#include <asm/io.h>
#include <asm/arch/regs-clock.h>
+#include <asm/arch/regs-gpio.h>
#include "clock.h"
#include "cpu.h"
@@ -51,7 +53,8 @@
/* clock information */
static LIST_HEAD(clocks);
-static DEFINE_MUTEX(clocks_mutex);
+
+DEFINE_MUTEX(clocks_mutex);
/* old functions */
@@ -178,12 +181,24 @@
long clk_round_rate(struct clk *clk, unsigned long rate)
{
+ if (!IS_ERR(clk) && clk->round_rate)
+ return (clk->round_rate)(clk, rate);
+
return rate;
}
int clk_set_rate(struct clk *clk, unsigned long rate)
{
- return -EINVAL;
+ int ret;
+
+ if (IS_ERR(clk))
+ return -EINVAL;
+
+ mutex_lock(&clocks_mutex);
+ ret = (clk->set_rate)(clk, rate);
+ mutex_unlock(&clocks_mutex);
+
+ return ret;
}
struct clk *clk_get_parent(struct clk *clk)
@@ -191,6 +206,23 @@
return clk->parent;
}
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+ int ret = 0;
+
+ if (IS_ERR(clk))
+ return -EINVAL;
+
+ mutex_lock(&clocks_mutex);
+
+ if (clk->set_parent)
+ ret = (clk->set_parent)(clk, parent);
+
+ mutex_unlock(&clocks_mutex);
+
+ return ret;
+}
+
EXPORT_SYMBOL(clk_get);
EXPORT_SYMBOL(clk_put);
EXPORT_SYMBOL(clk_enable);
@@ -199,6 +231,29 @@
EXPORT_SYMBOL(clk_round_rate);
EXPORT_SYMBOL(clk_set_rate);
EXPORT_SYMBOL(clk_get_parent);
+EXPORT_SYMBOL(clk_set_parent);
+
+/* base clock enable */
+
+static int s3c24xx_upll_enable(struct clk *clk, int enable)
+{
+ unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW);
+ unsigned long orig = clkslow;
+
+ if (enable)
+ clkslow &= ~S3C2410_CLKSLOW_UCLK_OFF;
+ else
+ clkslow |= S3C2410_CLKSLOW_UCLK_OFF;
+
+ __raw_writel(clkslow, S3C2410_CLKSLOW);
+
+ /* if we started the UPLL, then allow to settle */
+
+ if (enable && !(orig & S3C2410_CLKSLOW_UCLK_OFF))
+ udelay(200);
+
+ return 0;
+}
/* base clocks */
@@ -210,6 +265,14 @@
.ctrlbit = 0,
};
+static struct clk clk_upll = {
+ .name = "upll",
+ .id = -1,
+ .parent = NULL,
+ .enable = s3c24xx_upll_enable,
+ .ctrlbit = 0,
+};
+
static struct clk clk_f = {
.name = "fclk",
.id = -1,
@@ -234,26 +297,124 @@
.ctrlbit = 0,
};
+struct clk clk_usb_bus = {
+ .name = "usb-bus",
+ .id = -1,
+ .rate = 0,
+ .parent = &clk_upll,
+};
+
/* clocks that could be registered by external code */
+static int s3c24xx_dclk_enable(struct clk *clk, int enable)
+{
+ unsigned long dclkcon = __raw_readl(S3C2410_DCLKCON);
+
+ if (enable)
+ dclkcon |= clk->ctrlbit;
+ else
+ dclkcon &= ~clk->ctrlbit;
+
+ __raw_writel(dclkcon, S3C2410_DCLKCON);
+
+ return 0;
+}
+
+static int s3c24xx_dclk_setparent(struct clk *clk, struct clk *parent)
+{
+ unsigned long dclkcon;
+ unsigned int uclk;
+
+ if (parent == &clk_upll)
+ uclk = 1;
+ else if (parent == &clk_p)
+ uclk = 0;
+ else
+ return -EINVAL;
+
+ clk->parent = parent;
+
+ dclkcon = __raw_readl(S3C2410_DCLKCON);
+
+ if (clk->ctrlbit == S3C2410_DCLKCON_DCLK0EN) {
+ if (uclk)
+ dclkcon |= S3C2410_DCLKCON_DCLK0_UCLK;
+ else
+ dclkcon &= ~S3C2410_DCLKCON_DCLK0_UCLK;
+ } else {
+ if (uclk)
+ dclkcon |= S3C2410_DCLKCON_DCLK1_UCLK;
+ else
+ dclkcon &= ~S3C2410_DCLKCON_DCLK1_UCLK;
+ }
+
+ __raw_writel(dclkcon, S3C2410_DCLKCON);
+
+ return 0;
+}
+
+
+static int s3c24xx_clkout_setparent(struct clk *clk, struct clk *parent)
+{
+ unsigned long mask;
+ unsigned long source;
+
+ /* calculate the MISCCR setting for the clock */
+
+ if (parent == &clk_xtal)
+ source = S3C2410_MISCCR_CLK0_MPLL;
+ else if (parent == &clk_upll)
+ source = S3C2410_MISCCR_CLK0_UPLL;
+ else if (parent == &clk_f)
+ source = S3C2410_MISCCR_CLK0_FCLK;
+ else if (parent == &clk_p)
+ source = S3C2410_MISCCR_CLK0_PCLK;
+ else if (clk == &s3c24xx_clkout0 && parent == &s3c24xx_dclk0)
+ source = S3C2410_MISCCR_CLK0_DCLK0;
+ else if (clk == &s3c24xx_clkout1 && parent == &s3c24xx_dclk1)
+ source = S3C2410_MISCCR_CLK0_DCLK0;
+ else
+ return -EINVAL;
+
+ if (clk == &s3c24xx_dclk0)
+ mask = S3C2410_MISCCR_CLK0_MASK;
+ else {
+ source <<= 4;
+ mask = S3C2410_MISCCR_CLK1_MASK;
+ }
+
+ s3c2410_modify_misccr(mask, source);
+ return 0;
+}
+
+/* external clock definitions */
+
struct clk s3c24xx_dclk0 = {
.name = "dclk0",
.id = -1,
+ .ctrlbit = S3C2410_DCLKCON_DCLK0EN,
+ .enable = s3c24xx_dclk_enable,
+ .set_parent = s3c24xx_dclk_setparent,
};
struct clk s3c24xx_dclk1 = {
.name = "dclk1",
.id = -1,
+ .ctrlbit = S3C2410_DCLKCON_DCLK0EN,
+ .enable = s3c24xx_dclk_enable,
+ .set_parent = s3c24xx_dclk_setparent,
};
struct clk s3c24xx_clkout0 = {
.name = "clkout0",
.id = -1,
+ .set_parent = s3c24xx_clkout_setparent,
};
struct clk s3c24xx_clkout1 = {
.name = "clkout1",
.id = -1,
+ .set_parent = s3c24xx_clkout_setparent,
};
struct clk s3c24xx_uclk = {
@@ -262,7 +423,7 @@
};
-/* clock definitions */
+/* standard clock definitions */
static struct clk init_clocks[] = {
{
@@ -374,7 +535,7 @@
/* if this is a standard clock, set the usage state */
- if (clk->ctrlbit) {
+ if (clk->ctrlbit && clk->enable == s3c24xx_clkcon_enable) {
unsigned long clkcon = __raw_readl(S3C2410_CLKCON);
clk->usage = (clkcon & clk->ctrlbit) ? 1 : 0;
@@ -396,6 +557,7 @@
unsigned long hclk,
unsigned long pclk)
{
+ unsigned long upllcon = __raw_readl(S3C2410_UPLLCON);
unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW);
struct clk *clkp = init_clocks;
int ptr;
@@ -406,6 +568,7 @@
/* initialise the main system clocks */
clk_xtal.rate = xtal;
+ clk_upll.rate = s3c2410_get_pll(upllcon, xtal);
clk_h.rate = hclk;
clk_p.rate = pclk;
@@ -439,6 +602,9 @@
if (s3c24xx_register_clock(&clk_xtal) < 0)
printk(KERN_ERR "failed to register master xtal\n");
+ if (s3c24xx_register_clock(&clk_upll) < 0)
+ printk(KERN_ERR "failed to register upll clock\n");
+
if (s3c24xx_register_clock(&clk_f) < 0)
printk(KERN_ERR "failed to register cpu fclk\n");
@@ -448,6 +614,10 @@
if (s3c24xx_register_clock(&clk_p) < 0)
printk(KERN_ERR "failed to register cpu pclk\n");
+
+ if (s3c24xx_register_clock(&clk_usb_bus) < 0)
+ printk(KERN_ERR "failed to register usb bus clock\n");
+
/* register clocks from clock array */
for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) {
diff --git a/arch/arm/mach-s3c2410/clock.h b/arch/arm/mach-s3c2410/clock.h
index eb5c95d..01bb458 100644
--- a/arch/arm/mach-s3c2410/clock.h
+++ b/arch/arm/mach-s3c2410/clock.h
@@ -19,7 +19,11 @@
int usage;
unsigned long rate;
unsigned long ctrlbit;
+
int (*enable)(struct clk *, int enable);
+ int (*set_rate)(struct clk *c, unsigned long rate);
+ unsigned long (*round_rate)(struct clk *c, unsigned long rate);
+ int (*set_parent)(struct clk *c, struct clk *parent);
};
/* other clocks which may be registered by board support */
@@ -30,11 +34,15 @@
extern struct clk s3c24xx_clkout1;
extern struct clk s3c24xx_uclk;
+extern struct clk clk_usb_bus;
+
/* exports for arch/arm/mach-s3c2410
*
* Please DO NOT use these outside of arch/arm/mach-s3c2410
*/
+extern struct mutex clocks_mutex;
+
extern int s3c24xx_clkcon_enable(struct clk *clk, int enable);
extern int s3c24xx_register_clock(struct clk *clk);
diff --git a/arch/arm/mach-s3c2410/mach-osiris.c b/arch/arm/mach-s3c2410/mach-osiris.c
new file mode 100644
index 0000000..ae07875
--- /dev/null
+++ b/arch/arm/mach-s3c2410/mach-osiris.c
@@ -0,0 +1,294 @@
+/* linux/arch/arm/mach-s3c2410/mach-osiris.c
+ *
+ * Copyright (c) 2005 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/osiris-map.h>
+#include <asm/arch/osiris-cpld.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <asm/arch/regs-serial.h>
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-mem.h>
+#include <asm/arch/regs-lcd.h>
+#include <asm/arch/nand.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+
+#include "clock.h"
+#include "devs.h"
+#include "cpu.h"
+
+/* onboard perihpheral map */
+
+static struct map_desc osiris_iodesc[] __initdata = {
+ /* ISA IO areas (may be over-written later) */
+
+ {
+ .virtual = (u32)S3C24XX_VA_ISA_BYTE,
+ .pfn = __phys_to_pfn(S3C2410_CS5),
+ .length = SZ_16M,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)S3C24XX_VA_ISA_WORD,
+ .pfn = __phys_to_pfn(S3C2410_CS5),
+ .length = SZ_16M,
+ .type = MT_DEVICE,
+ },
+
+ /* CPLD control registers */
+
+ {
+ .virtual = (u32)OSIRIS_VA_CTRL1,
+ .pfn = __phys_to_pfn(OSIRIS_PA_CTRL1),
+ .length = SZ_16K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = (u32)OSIRIS_VA_CTRL2,
+ .pfn = __phys_to_pfn(OSIRIS_PA_CTRL2),
+ .length = SZ_16K,
+ .type = MT_DEVICE
+ },
+};
+
+#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c24xx_uart_clksrc osiris_serial_clocks[] = {
+ [0] = {
+ .name = "uclk",
+ .divisor = 1,
+ .min_baud = 0,
+ .max_baud = 0,
+ },
+ [1] = {
+ .name = "pclk",
+ .divisor = 1,
+ .min_baud = 0,
+ .max_baud = 0.
+ }
+};
+
+
+static struct s3c2410_uartcfg osiris_uartcfgs[] = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ .clocks = osiris_serial_clocks,
+ .clocks_size = ARRAY_SIZE(osiris_serial_clocks)
+ },
+ [1] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ .clocks = osiris_serial_clocks,
+ .clocks_size = ARRAY_SIZE(osiris_serial_clocks)
+ },
+};
+
+/* NAND Flash on Osiris board */
+
+static int external_map[] = { 2 };
+static int chip0_map[] = { 0 };
+static int chip1_map[] = { 1 };
+
+static struct mtd_partition osiris_default_nand_part[] = {
+ [0] = {
+ .name = "Boot Agent",
+ .size = SZ_16K,
+ .offset = 0
+ },
+ [1] = {
+ .name = "/boot",
+ .size = SZ_4M - SZ_16K,
+ .offset = SZ_16K,
+ },
+ [2] = {
+ .name = "user1",
+ .offset = SZ_4M,
+ .size = SZ_32M - SZ_4M,
+ },
+ [3] = {
+ .name = "user2",
+ .offset = SZ_32M,
+ .size = MTDPART_SIZ_FULL,
+ }
+};
+
+/* the Osiris has 3 selectable slots for nand-flash, the two
+ * on-board chip areas, as well as the external slot.
+ *
+ * Note, there is no current hot-plug support for the External
+ * socket.
+*/
+
+static struct s3c2410_nand_set osiris_nand_sets[] = {
+ [1] = {
+ .name = "External",
+ .nr_chips = 1,
+ .nr_map = external_map,
+ .nr_partitions = ARRAY_SIZE(osiris_default_nand_part),
+ .partitions = osiris_default_nand_part
+ },
+ [0] = {
+ .name = "chip0",
+ .nr_chips = 1,
+ .nr_map = chip0_map,
+ .nr_partitions = ARRAY_SIZE(osiris_default_nand_part),
+ .partitions = osiris_default_nand_part
+ },
+ [2] = {
+ .name = "chip1",
+ .nr_chips = 1,
+ .nr_map = chip1_map,
+ .nr_partitions = ARRAY_SIZE(osiris_default_nand_part),
+ .partitions = osiris_default_nand_part
+ },
+};
+
+static void osiris_nand_select(struct s3c2410_nand_set *set, int slot)
+{
+ unsigned int tmp;
+
+ slot = set->nr_map[slot] & 3;
+
+ pr_debug("osiris_nand: selecting slot %d (set %p,%p)\n",
+ slot, set, set->nr_map);
+
+ tmp = __raw_readb(OSIRIS_VA_CTRL1);
+ tmp &= ~OSIRIS_CTRL1_NANDSEL;
+ tmp |= slot;
+
+ pr_debug("osiris_nand: ctrl1 now %02x\n", tmp);
+
+ __raw_writeb(tmp, OSIRIS_VA_CTRL1);
+}
+
+static struct s3c2410_platform_nand osiris_nand_info = {
+ .tacls = 25,
+ .twrph0 = 60,
+ .twrph1 = 60,
+ .nr_sets = ARRAY_SIZE(osiris_nand_sets),
+ .sets = osiris_nand_sets,
+ .select_chip = osiris_nand_select,
+};
+
+/* PCMCIA control and configuration */
+
+static struct resource osiris_pcmcia_resource[] = {
+ [0] = {
+ .start = 0x0f000000,
+ .end = 0x0f100000,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 0x0c000000,
+ .end = 0x0c100000,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device osiris_pcmcia = {
+ .name = "osiris-pcmcia",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(osiris_pcmcia_resource),
+ .resource = osiris_pcmcia_resource,
+};
+
+/* Standard Osiris devices */
+
+static struct platform_device *osiris_devices[] __initdata = {
+ &s3c_device_i2c,
+ &s3c_device_nand,
+ &osiris_pcmcia,
+};
+
+static struct clk *osiris_clocks[] = {
+ &s3c24xx_dclk0,
+ &s3c24xx_dclk1,
+ &s3c24xx_clkout0,
+ &s3c24xx_clkout1,
+ &s3c24xx_uclk,
+};
+
+static struct s3c24xx_board osiris_board __initdata = {
+ .devices = osiris_devices,
+ .devices_count = ARRAY_SIZE(osiris_devices),
+ .clocks = osiris_clocks,
+ .clocks_count = ARRAY_SIZE(osiris_clocks)
+};
+
+static void __init osiris_map_io(void)
+{
+ unsigned long flags;
+
+ /* initialise the clocks */
+
+ s3c24xx_dclk0.parent = NULL;
+ s3c24xx_dclk0.rate = 12*1000*1000;
+
+ s3c24xx_dclk1.parent = NULL;
+ s3c24xx_dclk1.rate = 24*1000*1000;
+
+ s3c24xx_clkout0.parent = &s3c24xx_dclk0;
+ s3c24xx_clkout1.parent = &s3c24xx_dclk1;
+
+ s3c24xx_uclk.parent = &s3c24xx_clkout1;
+
+ s3c_device_nand.dev.platform_data = &osiris_nand_info;
+
+ s3c24xx_init_io(osiris_iodesc, ARRAY_SIZE(osiris_iodesc));
+ s3c24xx_init_clocks(0);
+ s3c24xx_init_uarts(osiris_uartcfgs, ARRAY_SIZE(osiris_uartcfgs));
+ s3c24xx_set_board(&osiris_board);
+
+ /* fix bus configuration (nBE settings wrong on ABLE pre v2.20) */
+
+ local_irq_save(flags);
+ __raw_writel(__raw_readl(S3C2410_BWSCON) | S3C2410_BWSCON_ST1 | S3C2410_BWSCON_ST2 | S3C2410_BWSCON_ST3 | S3C2410_BWSCON_ST4 | S3C2410_BWSCON_ST5, S3C2410_BWSCON);
+ local_irq_restore(flags);
+
+ /* write-protect line to the NAND */
+ s3c2410_gpio_setpin(S3C2410_GPA0, 1);
+}
+
+MACHINE_START(OSIRIS, "Simtec-OSIRIS")
+ /* Maintainer: Ben Dooks <ben@simtec.co.uk> */
+ .phys_io = S3C2410_PA_UART,
+ .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
+ .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .map_io = osiris_map_io,
+ .init_irq = s3c24xx_init_irq,
+ .timer = &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s3c2410/s3c2440-clock.c b/arch/arm/mach-s3c2410/s3c2440-clock.c
index b557a2b..57a1597 100644
--- a/arch/arm/mach-s3c2410/s3c2440-clock.c
+++ b/arch/arm/mach-s3c2410/s3c2440-clock.c
@@ -31,6 +31,7 @@
#include <linux/sysdev.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
+#include <linux/mutex.h>
#include <linux/clk.h>
#include <asm/hardware.h>
@@ -45,10 +46,47 @@
/* S3C2440 extended clock support */
-static struct clk s3c2440_clk_upll = {
- .name = "upll",
- .id = -1,
-};
+static unsigned long s3c2440_camif_upll_round(struct clk *clk,
+ unsigned long rate)
+{
+ unsigned long parent_rate = clk_get_rate(clk->parent);
+ int div;
+
+ if (rate > parent_rate)
+ return parent_rate;
+
+ /* note, we remove the +/- 1 calculations for the divisor */
+
+ div = (parent_rate / rate) / 2;
+
+ if (div < 1)
+ div = 1;
+ else if (div > 16)
+ div = 16;
+
+ return parent_rate / (div * 2);
+}
+
+static int s3c2440_camif_upll_setrate(struct clk *clk, unsigned long rate)
+{
+ unsigned long parent_rate = clk_get_rate(clk->parent);
+ unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN);
+
+ rate = s3c2440_camif_upll_round(clk, rate);
+
+ camdivn &= ~(S3C2440_CAMDIVN_CAMCLK_SEL | S3C2440_CAMDIVN_CAMCLK_MASK);
+
+ if (rate != parent_rate) {
+ camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL;
+ camdivn |= (((parent_rate / rate) / 2) - 1);
+ }
+
+ __raw_writel(camdivn, S3C2440_CAMDIVN);
+
+ return 0;
+}
+
+/* Extra S3C2440 clocks */
static struct clk s3c2440_clk_cam = {
.name = "camif",
@@ -57,6 +95,13 @@
.ctrlbit = S3C2440_CLKCON_CAMERA,
};
+static struct clk s3c2440_clk_cam_upll = {
+ .name = "camif-upll",
+ .id = -1,
+ .set_rate = s3c2440_camif_upll_setrate,
+ .round_rate = s3c2440_camif_upll_round,
+};
+
static struct clk s3c2440_clk_ac97 = {
.name = "ac97",
.id = -1,
@@ -66,38 +111,46 @@
static int s3c2440_clk_add(struct sys_device *sysdev)
{
- unsigned long upllcon = __raw_readl(S3C2410_UPLLCON);
unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN);
+ unsigned long clkdivn;
struct clk *clk_h;
struct clk *clk_p;
- struct clk *clk_xtal;
+ struct clk *clk_upll;
- clk_xtal = clk_get(NULL, "xtal");
- if (IS_ERR(clk_xtal)) {
- printk(KERN_ERR "S3C2440: Failed to get clk_xtal\n");
- return -EINVAL;
- }
-
- s3c2440_clk_upll.rate = s3c2410_get_pll(upllcon, clk_xtal->rate);
-
- printk("S3C2440: Clock Support, UPLL %ld.%03ld MHz, DVS %s\n",
- print_mhz(s3c2440_clk_upll.rate),
+ printk("S3C2440: Clock Support, DVS %s\n",
(camdivn & S3C2440_CAMDIVN_DVSEN) ? "on" : "off");
clk_p = clk_get(NULL, "pclk");
clk_h = clk_get(NULL, "hclk");
+ clk_upll = clk_get(NULL, "upll");
- if (IS_ERR(clk_p) || IS_ERR(clk_h)) {
+ if (IS_ERR(clk_p) || IS_ERR(clk_h) || IS_ERR(clk_upll)) {
printk(KERN_ERR "S3C2440: Failed to get parent clocks\n");
return -EINVAL;
}
+ /* check rate of UPLL, and if it is near 96MHz, then change
+ * to using half the UPLL rate for the system */
+
+ if (clk_get_rate(clk_upll) > (94 * MHZ)) {
+ clk_usb_bus.rate = clk_get_rate(clk_upll) / 2;
+
+ mutex_lock(&clocks_mutex);
+
+ clkdivn = __raw_readl(S3C2410_CLKDIVN);
+ clkdivn |= S3C2440_CLKDIVN_UCLK;
+ __raw_writel(camdivn, S3C2410_CLKDIVN);
+
+ mutex_unlock(&clocks_mutex);
+ }
+
s3c2440_clk_cam.parent = clk_h;
s3c2440_clk_ac97.parent = clk_p;
+ s3c2440_clk_cam_upll.parent = clk_upll;
s3c24xx_register_clock(&s3c2440_clk_ac97);
s3c24xx_register_clock(&s3c2440_clk_cam);
- s3c24xx_register_clock(&s3c2440_clk_upll);
+ s3c24xx_register_clock(&s3c2440_clk_cam_upll);
clk_disable(&s3c2440_clk_ac97);
clk_disable(&s3c2440_clk_cam);
diff --git a/arch/arm/mach-s3c2410/time.c b/arch/arm/mach-s3c2410/time.c
index 10a2976..9d7b799 100644
--- a/arch/arm/mach-s3c2410/time.c
+++ b/arch/arm/mach-s3c2410/time.c
@@ -142,6 +142,12 @@
.handler = s3c2410_timer_interrupt,
};
+#define use_tclk1_12() ( \
+ machine_is_bast() || \
+ machine_is_vr1000() || \
+ machine_is_anubis() || \
+ machine_is_osiris() )
+
/*
* Set up timer interrupt, and return the current time in seconds.
*
@@ -165,7 +171,7 @@
/* configure the system for whichever machine is in use */
- if (machine_is_bast() || machine_is_vr1000() || machine_is_anubis()) {
+ if (use_tclk1_12()) {
/* timer is at 12MHz, scaler is 1 */
timer_usec_ticks = timer_mask_usec_ticks(1, 12000000);
tcnt = 12000000 / HZ;
diff --git a/arch/arm/mach-sa1100/Makefile b/arch/arm/mach-sa1100/Makefile
index e4a4a3e..e27f150 100644
--- a/arch/arm/mach-sa1100/Makefile
+++ b/arch/arm/mach-sa1100/Makefile
@@ -3,7 +3,7 @@
#
# Common support
-obj-y := generic.o irq.o dma.o time.o
+obj-y := clock.o generic.o irq.o dma.o time.o #nmi-oopser.o
obj-m :=
obj-n :=
obj- :=
diff --git a/arch/arm/mach-sa1100/clock.c b/arch/arm/mach-sa1100/clock.c
new file mode 100644
index 0000000..b1e8fd7
--- /dev/null
+++ b/arch/arm/mach-sa1100/clock.c
@@ -0,0 +1,132 @@
+/*
+ * linux/arch/arm/mach-sa1100/clock.c
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/clk.h>
+#include <linux/spinlock.h>
+
+#include <asm/hardware.h>
+#include <asm/semaphore.h>
+
+struct clk {
+ struct list_head node;
+ unsigned long rate;
+ struct module *owner;
+ const char *name;
+ unsigned int enabled;
+ void (*enable)(void);
+ void (*disable)(void);
+};
+
+static LIST_HEAD(clocks);
+static DECLARE_MUTEX(clocks_sem);
+static DEFINE_SPINLOCK(clocks_lock);
+
+struct clk *clk_get(struct device *dev, const char *id)
+{
+ struct clk *p, *clk = ERR_PTR(-ENOENT);
+
+ down(&clocks_sem);
+ list_for_each_entry(p, &clocks, node) {
+ if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
+ clk = p;
+ break;
+ }
+ }
+ up(&clocks_sem);
+
+ return clk;
+}
+EXPORT_SYMBOL(clk_get);
+
+void clk_put(struct clk *clk)
+{
+ module_put(clk->owner);
+}
+EXPORT_SYMBOL(clk_put);
+
+int clk_enable(struct clk *clk)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&clocks_lock, flags);
+ if (clk->enabled++ == 0)
+ clk->enable();
+ spin_unlock_irqrestore(&clocks_lock, flags);
+ return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+ unsigned long flags;
+
+ WARN_ON(clk->enabled == 0);
+
+ spin_lock_irqsave(&clocks_lock, flags);
+ if (--clk->enabled == 0)
+ clk->disable();
+ spin_unlock_irqrestore(&clocks_lock, flags);
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+ return clk->rate;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+
+static void clk_gpio27_enable(void)
+{
+ /*
+ * First, set up the 3.6864MHz clock on GPIO 27 for the SA-1111:
+ * (SA-1110 Developer's Manual, section 9.1.2.1)
+ */
+ GAFR |= GPIO_32_768kHz;
+ GPDR |= GPIO_32_768kHz;
+ TUCR = TUCR_3_6864MHz;
+}
+
+static void clk_gpio27_disable(void)
+{
+ TUCR = 0;
+ GPDR &= ~GPIO_32_768kHz;
+ GAFR &= ~GPIO_32_768kHz;
+}
+
+static struct clk clk_gpio27 = {
+ .name = "GPIO27_CLK",
+ .rate = 3686400,
+ .enable = clk_gpio27_enable,
+ .disable = clk_gpio27_disable,
+};
+
+int clk_register(struct clk *clk)
+{
+ down(&clocks_sem);
+ list_add(&clk->node, &clocks);
+ up(&clocks_sem);
+ return 0;
+}
+EXPORT_SYMBOL(clk_register);
+
+void clk_unregister(struct clk *clk)
+{
+ down(&clocks_sem);
+ list_del(&clk->node);
+ up(&clocks_sem);
+}
+EXPORT_SYMBOL(clk_unregister);
+
+static int __init clk_init(void)
+{
+ clk_register(&clk_gpio27);
+ return 0;
+}
+arch_initcall(clk_init);
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index 9ebbe80..799697d 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -112,7 +112,7 @@
{
unsigned int i;
- vic_init(VA_VIC_BASE, ~(1 << 31));
+ vic_init(VA_VIC_BASE, IRQ_VIC_START, ~(1 << 31));
set_irq_handler(IRQ_VICSOURCE31, sic_handle_irq);
enable_irq(IRQ_VICSOURCE31);
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 3b79d0e..eaaec90 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -62,7 +62,7 @@
# ARM920T
config CPU_ARM920T
bool "Support ARM920T processor" if !ARCH_S3C2410
- depends on ARCH_INTEGRATOR || ARCH_S3C2410 || ARCH_IMX || ARCH_AAEC2000 || ARCH_AT91RM9200
+ depends on ARCH_EP93XX || ARCH_INTEGRATOR || ARCH_S3C2410 || ARCH_IMX || ARCH_AAEC2000 || ARCH_AT91RM9200
default y if ARCH_S3C2410 || ARCH_AT91RM9200
select CPU_32v4
select CPU_ABRT_EV4T
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index b0321e9..8827912 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -19,7 +19,6 @@
#include <linux/initrd.h>
#include <asm/mach-types.h>
-#include <asm/hardware.h>
#include <asm/setup.h>
#include <asm/tlb.h>
diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c
index da9b359..25e0ca3e 100644
--- a/arch/arm/mm/ioremap.c
+++ b/arch/arm/mm/ioremap.c
@@ -26,7 +26,6 @@
#include <linux/vmalloc.h>
#include <asm/cacheflush.h>
-#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/tlbflush.h>
diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S
index 82ec954..3aa80094 100644
--- a/arch/arm/mm/proc-arm1020.S
+++ b/arch/arm/mm/proc-arm1020.S
@@ -32,7 +32,6 @@
#include <asm/pgtable.h>
#include <asm/procinfo.h>
#include <asm/ptrace.h>
-#include <asm/hardware.h>
/*
* This is the maximum size of an area which will be invalidated
diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S
index 7375fe9..767d158 100644
--- a/arch/arm/mm/proc-arm1020e.S
+++ b/arch/arm/mm/proc-arm1020e.S
@@ -32,7 +32,6 @@
#include <asm/pgtable.h>
#include <asm/procinfo.h>
#include <asm/ptrace.h>
-#include <asm/hardware.h>
/*
* This is the maximum size of an area which will be invalidated
diff --git a/arch/arm/mm/proc-arm720.S b/arch/arm/mm/proc-arm720.S
index a13e018..471286f 100644
--- a/arch/arm/mm/proc-arm720.S
+++ b/arch/arm/mm/proc-arm720.S
@@ -37,7 +37,6 @@
#include <asm/pgtable.h>
#include <asm/procinfo.h>
#include <asm/ptrace.h>
-#include <asm/hardware.h>
/*
* Function: arm720_proc_init (void)
diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S
index d165138..950d3b6 100644
--- a/arch/arm/mm/proc-arm920.S
+++ b/arch/arm/mm/proc-arm920.S
@@ -30,7 +30,6 @@
#include <asm/assembler.h>
#include <asm/pgtable.h>
#include <asm/procinfo.h>
-#include <asm/hardware.h>
#include <asm/page.h>
#include <asm/ptrace.h>
#include "proc-macros.S"
diff --git a/arch/arm/mm/proc-arm922.S b/arch/arm/mm/proc-arm922.S
index 23b8ed9..410b032 100644
--- a/arch/arm/mm/proc-arm922.S
+++ b/arch/arm/mm/proc-arm922.S
@@ -31,7 +31,6 @@
#include <asm/assembler.h>
#include <asm/pgtable.h>
#include <asm/procinfo.h>
-#include <asm/hardware.h>
#include <asm/page.h>
#include <asm/ptrace.h>
#include "proc-macros.S"
diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S
index ee95c52..6dd2be7 100644
--- a/arch/arm/mm/proc-arm925.S
+++ b/arch/arm/mm/proc-arm925.S
@@ -53,7 +53,6 @@
#include <asm/assembler.h>
#include <asm/pgtable.h>
#include <asm/procinfo.h>
-#include <asm/hardware.h>
#include <asm/page.h>
#include <asm/ptrace.h>
#include "proc-macros.S"
diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S
index 7d042dc..022e868 100644
--- a/arch/arm/mm/proc-arm926.S
+++ b/arch/arm/mm/proc-arm926.S
@@ -30,7 +30,6 @@
#include <asm/assembler.h>
#include <asm/pgtable.h>
#include <asm/procinfo.h>
-#include <asm/hardware.h>
#include <asm/page.h>
#include <asm/ptrace.h>
#include "proc-macros.S"
diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S
index 2d3823e..b50f87a 100644
--- a/arch/arm/mm/proc-xscale.S
+++ b/arch/arm/mm/proc-xscale.S
@@ -24,7 +24,6 @@
#include <linux/init.h>
#include <asm/assembler.h>
#include <asm/procinfo.h>
-#include <asm/hardware.h>
#include <asm/pgtable.h>
#include <asm/page.h>
#include <asm/ptrace.h>
diff --git a/arch/arm/oprofile/common.c b/arch/arm/oprofile/common.c
index 6f8bc1f..6f83335 100644
--- a/arch/arm/oprofile/common.c
+++ b/arch/arm/oprofile/common.c
@@ -10,17 +10,18 @@
#include <linux/init.h>
#include <linux/oprofile.h>
#include <linux/errno.h>
+#include <linux/slab.h>
#include <linux/sysdev.h>
-#include <asm/semaphore.h>
+#include <linux/mutex.h>
#include "op_counter.h"
#include "op_arm_model.h"
static struct op_arm_model_spec *op_arm_model;
static int op_arm_enabled;
-static struct semaphore op_arm_sem;
+static DEFINE_MUTEX(op_arm_mutex);
-struct op_counter_config counter_config[OP_MAX_COUNTER];
+struct op_counter_config *counter_config;
static int op_arm_create_files(struct super_block *sb, struct dentry *root)
{
@@ -28,7 +29,7 @@
for (i = 0; i < op_arm_model->num_counters; i++) {
struct dentry *dir;
- char buf[2];
+ char buf[4];
snprintf(buf, sizeof buf, "%d", i);
dir = oprofilefs_mkdir(sb, root, buf);
@@ -57,40 +58,40 @@
{
int ret = -EBUSY;
- down(&op_arm_sem);
+ mutex_lock(&op_arm_mutex);
if (!op_arm_enabled) {
ret = op_arm_model->start();
op_arm_enabled = !ret;
}
- up(&op_arm_sem);
+ mutex_unlock(&op_arm_mutex);
return ret;
}
static void op_arm_stop(void)
{
- down(&op_arm_sem);
+ mutex_lock(&op_arm_mutex);
if (op_arm_enabled)
op_arm_model->stop();
op_arm_enabled = 0;
- up(&op_arm_sem);
+ mutex_unlock(&op_arm_mutex);
}
#ifdef CONFIG_PM
static int op_arm_suspend(struct sys_device *dev, pm_message_t state)
{
- down(&op_arm_sem);
+ mutex_lock(&op_arm_mutex);
if (op_arm_enabled)
op_arm_model->stop();
- up(&op_arm_sem);
+ mutex_unlock(&op_arm_mutex);
return 0;
}
static int op_arm_resume(struct sys_device *dev)
{
- down(&op_arm_sem);
+ mutex_lock(&op_arm_mutex);
if (op_arm_enabled && op_arm_model->start())
op_arm_enabled = 0;
- up(&op_arm_sem);
+ mutex_unlock(&op_arm_mutex);
return 0;
}
@@ -135,12 +136,15 @@
#endif
if (spec) {
- init_MUTEX(&op_arm_sem);
-
ret = spec->init();
if (ret < 0)
return ret;
+ counter_config = kcalloc(spec->num_counters, sizeof(struct op_counter_config),
+ GFP_KERNEL);
+ if (!counter_config)
+ return -ENOMEM;
+
op_arm_model = spec;
init_driverfs();
ops->create_files = op_arm_create_files;
@@ -162,5 +166,5 @@
exit_driverfs();
op_arm_model = NULL;
}
+ kfree(counter_config);
}
-
diff --git a/arch/arm/oprofile/op_counter.h b/arch/arm/oprofile/op_counter.h
index 153c1d4..8c5351d 100644
--- a/arch/arm/oprofile/op_counter.h
+++ b/arch/arm/oprofile/op_counter.h
@@ -24,6 +24,6 @@
unsigned long user;
};
-extern struct op_counter_config counter_config[];
+extern struct op_counter_config *counter_config;
#endif /* OP_COUNTER_H */
diff --git a/arch/arm/vfp/entry.S b/arch/arm/vfp/entry.S
index 6f17187..9ab1abf 100644
--- a/arch/arm/vfp/entry.S
+++ b/arch/arm/vfp/entry.S
@@ -22,6 +22,7 @@
.globl do_vfp
do_vfp:
+ enable_irq
ldr r4, .LCvfp
add r10, r10, #TI_VFPSTATE @ r10 = workspace
ldr pc, [r4] @ call VFP entry point
diff --git a/drivers/net/ixp2000/enp2611.c b/drivers/net/ixp2000/enp2611.c
index d82651a..6f7dce8 100644
--- a/drivers/net/ixp2000/enp2611.c
+++ b/drivers/net/ixp2000/enp2611.c
@@ -16,7 +16,7 @@
#include <linux/etherdevice.h>
#include <linux/init.h>
#include <linux/moduleparam.h>
-#include <asm/arch/uengine.h>
+#include <asm/hardware/uengine.h>
#include <asm/mach-types.h>
#include <asm/io.h>
#include "ixpdev.h"
diff --git a/drivers/net/ixp2000/ixpdev.c b/drivers/net/ixp2000/ixpdev.c
index 09f03f4..77f104a 100644
--- a/drivers/net/ixp2000/ixpdev.c
+++ b/drivers/net/ixp2000/ixpdev.c
@@ -16,7 +16,7 @@
#include <linux/etherdevice.h>
#include <linux/init.h>
#include <linux/moduleparam.h>
-#include <asm/arch/uengine.h>
+#include <asm/hardware/uengine.h>
#include <asm/mach-types.h>
#include <asm/io.h>
#include "ixp2400_rx.ucode"
diff --git a/include/asm-arm/arch-aaec2000/param.h b/include/asm-arm/arch-aaec2000/param.h
deleted file mode 100644
index 139936c..0000000
--- a/include/asm-arm/arch-aaec2000/param.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * linux/include/asm-arm/arch-aaec2000/param.h
- *
- * Copyright (c) 2005 Nicolas Bellido Y Ortega
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_PARAM_H
-#define __ASM_ARCH_PARAM_H
-
-#endif /* __ASM_ARCH_PARAM_H */
-
diff --git a/include/asm-arm/arch-at91rm9200/param.h b/include/asm-arm/arch-at91rm9200/param.h
deleted file mode 100644
index 9480f84..0000000
--- a/include/asm-arm/arch-at91rm9200/param.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/param.h
- *
- * Copyright (C) 2003 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __ASM_ARCH_PARAM_H
-#define __ASM_ARCH_PARAM_H
-
-/*
- * We use default params
- */
-
-#endif
diff --git a/include/asm-arm/arch-cl7500/debug-macro.S b/include/asm-arm/arch-cl7500/debug-macro.S
index a5d489d..9a2b67d 100644
--- a/include/asm-arm/arch-cl7500/debug-macro.S
+++ b/include/asm-arm/arch-cl7500/debug-macro.S
@@ -17,15 +17,5 @@
orr \rx, \rx, #0x00000be0
.endm
- .macro senduart,rd,rx
- strb \rd, [\rx]
- .endm
-
- .macro busyuart,rd,rx
- .endm
-
- .macro waituart,rd,rx
-1001: ldrb \rd, [\rx, #0x14]
- tst \rd, #0x20
- beq 1001b
- .endm
+#define UART_SHIFT 2
+#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-cl7500/param.h b/include/asm-arm/arch-cl7500/param.h
deleted file mode 100644
index 974bf69..0000000
--- a/include/asm-arm/arch-cl7500/param.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * linux/include/asm-arm/arch-cl7500/param.h
- *
- * Copyright (C) 1999 Nexus Electronics Ltd
- */
diff --git a/include/asm-arm/arch-clps711x/param.h b/include/asm-arm/arch-clps711x/param.h
deleted file mode 100644
index 86f6bd2..0000000
--- a/include/asm-arm/arch-clps711x/param.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * linux/include/asm-arm/arch-clps711x/param.h
- *
- * Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
diff --git a/include/asm-arm/arch-ebsa110/debug-macro.S b/include/asm-arm/arch-ebsa110/debug-macro.S
index dcd03a4..f61cada 100644
--- a/include/asm-arm/arch-ebsa110/debug-macro.S
+++ b/include/asm-arm/arch-ebsa110/debug-macro.S
@@ -16,19 +16,6 @@
orr \rx, \rx, #0x00000be0
.endm
- .macro senduart,rd,rx
- strb \rd, [\rx]
- .endm
-
- .macro busyuart,rd,rx
-1002: ldrb \rd, [\rx, #0x14]
- and \rd, \rd, #0x60
- teq \rd, #0x60
- bne 1002b
- .endm
-
- .macro waituart,rd,rx
-1001: ldrb \rd, [\rx, #0x18]
- tst \rd, #0x10
- beq 1001b
- .endm
+#define UART_SHIFT 2
+#define FLOW_CONTROL
+#include <asm/hardware/debug-8250.h>
diff --git a/include/asm-arm/arch-ebsa110/param.h b/include/asm-arm/arch-ebsa110/param.h
deleted file mode 100644
index be19b08..0000000
--- a/include/asm-arm/arch-ebsa110/param.h
+++ /dev/null
@@ -1,4 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ebsa110/param.h
- */
-#define HZ 200
diff --git a/include/asm-arm/arch-ebsa285/debug-macro.S b/include/asm-arm/arch-ebsa285/debug-macro.S
index 97d15fc..b48cec4 100644
--- a/include/asm-arm/arch-ebsa285/debug-macro.S
+++ b/include/asm-arm/arch-ebsa285/debug-macro.S
@@ -23,22 +23,10 @@
orr \rx, \rx, #0x000003f8
.endm
- .macro senduart,rd,rx
- strb \rd, [\rx]
- .endm
+#define UART_SHIFT 0
+#define FLOW_CONTROL
+#include <asm/hardware/debug-8250.S>
- .macro busyuart,rd,rx
-1002: ldrb \rd, [\rx, #0x5]
- and \rd, \rd, #0x60
- teq \rd, #0x60
- bne 1002b
- .endm
-
- .macro waituart,rd,rx
-1001: ldrb \rd, [\rx, #0x6]
- tst \rd, #0x10
- beq 1001b
- .endm
#else
/* For EBSA285 debugging */
.equ dc21285_high, ARMCSR_BASE & 0xff000000
diff --git a/include/asm-arm/arch-ebsa285/param.h b/include/asm-arm/arch-ebsa285/param.h
deleted file mode 100644
index 3827103..0000000
--- a/include/asm-arm/arch-ebsa285/param.h
+++ /dev/null
@@ -1,3 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ebsa285/param.h
- */
diff --git a/include/asm-arm/arch-ep93xx/debug-macro.S b/include/asm-arm/arch-ep93xx/debug-macro.S
new file mode 100644
index 0000000..397565a
--- /dev/null
+++ b/include/asm-arm/arch-ep93xx/debug-macro.S
@@ -0,0 +1,22 @@
+/*
+ * linux/include/asm-arm/arch-ep93xx/debug-macro.S
+ * Debugging macro include header
+ *
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+#include <asm/arch/ep93xx-regs.h>
+
+ .macro addruart,rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1 @ MMU enabled?
+ ldreq \rx, =EP93XX_APB_PHYS_BASE @ Physical base
+ ldrne \rx, =EP93XX_APB_VIRT_BASE @ virtual base
+ orr \rx, \rx, #0x000c0000
+ .endm
+
+#include <asm/hardware/debug-pl01x.S>
diff --git a/include/asm-arm/arch-ep93xx/dma.h b/include/asm-arm/arch-ep93xx/dma.h
new file mode 100644
index 0000000..898b3ab
--- /dev/null
+++ b/include/asm-arm/arch-ep93xx/dma.h
@@ -0,0 +1,3 @@
+/*
+ * linux/include/asm-arm/arch-ep93xx/dma.h
+ */
diff --git a/include/asm-arm/arch-ep93xx/entry-macro.S b/include/asm-arm/arch-ep93xx/entry-macro.S
new file mode 100644
index 0000000..84140a2
--- /dev/null
+++ b/include/asm-arm/arch-ep93xx/entry-macro.S
@@ -0,0 +1,53 @@
+/*
+ * linux/include/asm-arm/arch-ep93xx/entry-macro.S
+ * IRQ demultiplexing for EP93xx
+ *
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+#include <asm/arch/ep93xx-regs.h>
+
+ .macro disable_fiq
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ ldr \base, =(EP93XX_AHB_VIRT_BASE)
+ orr \base, \base, #0x000b0000
+ mov \irqnr, #0
+ ldr \irqstat, [\base] @ lower 32 interrupts
+ cmp \irqstat, #0
+ bne 1001f
+
+ eor \base, \base, #0x00070000
+ ldr \irqstat, [\base] @ upper 32 interrupts
+ cmp \irqstat, #0
+ beq 1002f
+ mov \irqnr, #0x20
+
+1001:
+ movs \tmp, \irqstat, lsl #16
+ movne \irqstat, \tmp
+ addeq \irqnr, \irqnr, #16
+
+ movs \tmp, \irqstat, lsl #8
+ movne \irqstat, \tmp
+ addeq \irqnr, \irqnr, #8
+
+ movs \tmp, \irqstat, lsl #4
+ movne \irqstat, \tmp
+ addeq \irqnr, \irqnr, #4
+
+ movs \tmp, \irqstat, lsl #2
+ movne \irqstat, \tmp
+ addeq \irqnr, \irqnr, #2
+
+ movs \tmp, \irqstat, lsl #1
+ addeq \irqnr, \irqnr, #1
+ orrs \base, \base, #1
+
+1002:
+ .endm
diff --git a/include/asm-arm/arch-ep93xx/ep93xx-regs.h b/include/asm-arm/arch-ep93xx/ep93xx-regs.h
new file mode 100644
index 0000000..71cea0b
--- /dev/null
+++ b/include/asm-arm/arch-ep93xx/ep93xx-regs.h
@@ -0,0 +1,125 @@
+/*
+ * linux/include/asm-arm/arch-ep93xx/ep93xx-regs.h
+ */
+
+#ifndef __ASM_ARCH_EP93XX_REGS_H
+#define __ASM_ARCH_EP93XX_REGS_H
+
+/*
+ * EP93xx linux memory map:
+ *
+ * virt phys size
+ * fe800000 5M per-platform mappings
+ * fed00000 80800000 2M APB
+ * fef00000 80000000 1M AHB
+ */
+
+#define EP93XX_AHB_PHYS_BASE 0x80000000
+#define EP93XX_AHB_VIRT_BASE 0xfef00000
+#define EP93XX_AHB_SIZE 0x00100000
+
+#define EP93XX_APB_PHYS_BASE 0x80800000
+#define EP93XX_APB_VIRT_BASE 0xfed00000
+#define EP93XX_APB_SIZE 0x00200000
+
+
+/* AHB peripherals */
+#define EP93XX_DMA_BASE (EP93XX_AHB_VIRT_BASE + 0x00000000)
+
+#define EP93XX_ETHERNET_BASE (EP93XX_AHB_VIRT_BASE + 0x00010000)
+
+#define EP93XX_USB_BASE (EP93XX_AHB_VIRT_BASE + 0x00020000)
+#define EP93XX_USB_PHYS_BASE (EP93XX_AHB_PHYS_BASE + 0x00020000)
+
+#define EP93XX_RASTER_BASE (EP93XX_AHB_VIRT_BASE + 0x00030000)
+
+#define EP93XX_GRAPHICS_ACCEL_BASE (EP93XX_AHB_VIRT_BASE + 0x00040000)
+
+#define EP93XX_SDRAM_CONTROLLER_BASE (EP93XX_AHB_VIRT_BASE + 0x00060000)
+
+#define EP93XX_PCMCIA_CONTROLLER_BASE (EP93XX_AHB_VIRT_BASE + 0x00080000)
+
+#define EP93XX_BOOT_ROM_BASE (EP93XX_AHB_VIRT_BASE + 0x00090000)
+
+#define EP93XX_IDE_BASE (EP93XX_AHB_VIRT_BASE + 0x000a0000)
+
+#define EP93XX_VIC1_BASE (EP93XX_AHB_VIRT_BASE + 0x000b0000)
+
+#define EP93XX_VIC2_BASE (EP93XX_AHB_VIRT_BASE + 0x000c0000)
+
+
+/* APB peripherals */
+#define EP93XX_TIMER_BASE (EP93XX_APB_VIRT_BASE + 0x00010000)
+#define EP93XX_TIMER_REG(x) (EP93XX_TIMER_BASE + (x))
+#define EP93XX_TIMER1_LOAD EP93XX_TIMER_REG(0x00)
+#define EP93XX_TIMER1_VALUE EP93XX_TIMER_REG(0x04)
+#define EP93XX_TIMER1_CONTROL EP93XX_TIMER_REG(0x08)
+#define EP93XX_TIMER1_CLEAR EP93XX_TIMER_REG(0x0c)
+#define EP93XX_TIMER2_LOAD EP93XX_TIMER_REG(0x20)
+#define EP93XX_TIMER2_VALUE EP93XX_TIMER_REG(0x24)
+#define EP93XX_TIMER2_CONTROL EP93XX_TIMER_REG(0x28)
+#define EP93XX_TIMER2_CLEAR EP93XX_TIMER_REG(0x2c)
+#define EP93XX_TIMER4_VALUE_LOW EP93XX_TIMER_REG(0x60)
+#define EP93XX_TIMER4_VALUE_HIGH EP93XX_TIMER_REG(0x64)
+#define EP93XX_TIMER3_LOAD EP93XX_TIMER_REG(0x80)
+#define EP93XX_TIMER3_VALUE EP93XX_TIMER_REG(0x84)
+#define EP93XX_TIMER3_CONTROL EP93XX_TIMER_REG(0x88)
+#define EP93XX_TIMER3_CLEAR EP93XX_TIMER_REG(0x8c)
+
+#define EP93XX_I2S_BASE (EP93XX_APB_VIRT_BASE + 0x00020000)
+
+#define EP93XX_SECURITY_BASE (EP93XX_APB_VIRT_BASE + 0x00030000)
+
+#define EP93XX_GPIO_BASE (EP93XX_APB_VIRT_BASE + 0x00040000)
+#define EP93XX_GPIO_REG(x) (EP93XX_GPIO_BASE + (x))
+#define EP93XX_GPIO_A_INT_TYPE1 EP93XX_GPIO_REG(0x90)
+#define EP93XX_GPIO_A_INT_TYPE2 EP93XX_GPIO_REG(0x94)
+#define EP93XX_GPIO_A_INT_ACK EP93XX_GPIO_REG(0x98)
+#define EP93XX_GPIO_A_INT_ENABLE EP93XX_GPIO_REG(0x9c)
+#define EP93XX_GPIO_A_INT_STATUS EP93XX_GPIO_REG(0xa0)
+#define EP93XX_GPIO_B_INT_TYPE1 EP93XX_GPIO_REG(0xac)
+#define EP93XX_GPIO_B_INT_TYPE2 EP93XX_GPIO_REG(0xb0)
+#define EP93XX_GPIO_B_INT_ACK EP93XX_GPIO_REG(0xb4)
+#define EP93XX_GPIO_B_INT_ENABLE EP93XX_GPIO_REG(0xb8)
+#define EP93XX_GPIO_B_INT_STATUS EP93XX_GPIO_REG(0xbc)
+
+#define EP93XX_AAC_BASE (EP93XX_APB_VIRT_BASE + 0x00080000)
+
+#define EP93XX_SPI_BASE (EP93XX_APB_VIRT_BASE + 0x000a0000)
+
+#define EP93XX_IRDA_BASE (EP93XX_APB_VIRT_BASE + 0x000b0000)
+
+#define EP93XX_UART1_BASE (EP93XX_APB_VIRT_BASE + 0x000c0000)
+#define EP93XX_UART1_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x000c0000)
+
+#define EP93XX_UART2_BASE (EP93XX_APB_VIRT_BASE + 0x000d0000)
+#define EP93XX_UART2_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x000d0000)
+
+#define EP93XX_UART3_BASE (EP93XX_APB_VIRT_BASE + 0x000e0000)
+#define EP93XX_UART3_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x000e0000)
+
+#define EP93XX_KEY_MATRIX_BASE (EP93XX_APB_VIRT_BASE + 0x000f0000)
+
+#define EP93XX_ADC_BASE (EP93XX_APB_VIRT_BASE + 0x00100000)
+#define EP93XX_TOUCHSCREEN_BASE (EP93XX_APB_VIRT_BASE + 0x00100000)
+
+#define EP93XX_PWM_BASE (EP93XX_APB_VIRT_BASE + 0x00110000)
+
+#define EP93XX_RTC_BASE (EP93XX_APB_VIRT_BASE + 0x00120000)
+
+#define EP93XX_SYSCON_BASE (EP93XX_APB_VIRT_BASE + 0x00130000)
+#define EP93XX_SYSCON_REG(x) (EP93XX_SYSCON_BASE + (x))
+#define EP93XX_SYSCON_POWER_STATE EP93XX_SYSCON_REG(0x00)
+#define EP93XX_SYSCON_CLOCK_CONTROL EP93XX_SYSCON_REG(0x04)
+#define EP93XX_SYSCON_CLOCK_UARTBAUD 0x20000000
+#define EP93XX_SYSCON_CLOCK_USH_EN 0x10000000
+#define EP93XX_SYSCON_HALT EP93XX_SYSCON_REG(0x08)
+#define EP93XX_SYSCON_STANDBY EP93XX_SYSCON_REG(0x0c)
+#define EP93XX_SYSCON_DEVICE_CONFIG EP93XX_SYSCON_REG(0x80)
+#define EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE 0x00800000
+#define EP93XX_SYSCON_SWLOCK EP93XX_SYSCON_REG(0xc0)
+
+#define EP93XX_WATCHDOG_BASE (EP93XX_APB_VIRT_BASE + 0x00140000)
+
+
+#endif
diff --git a/include/asm-arm/arch-ep93xx/gesbc9312.h b/include/asm-arm/arch-ep93xx/gesbc9312.h
new file mode 100644
index 0000000..4d0b302
--- /dev/null
+++ b/include/asm-arm/arch-ep93xx/gesbc9312.h
@@ -0,0 +1,3 @@
+/*
+ * linux/include/asm-arm/arch-ep93xx/gesbc9312.h
+ */
diff --git a/include/asm-arm/arch-ep93xx/gpio.h b/include/asm-arm/arch-ep93xx/gpio.h
new file mode 100644
index 0000000..1ee14a1
--- /dev/null
+++ b/include/asm-arm/arch-ep93xx/gpio.h
@@ -0,0 +1,107 @@
+/*
+ * linux/include/asm-arm/arch-ep93xx/gpio.h
+ */
+
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H
+
+#define GPIO_IN 0
+#define GPIO_OUT 1
+
+#define EP93XX_GPIO_LOW 0
+#define EP93XX_GPIO_HIGH 1
+
+extern void gpio_line_config(int line, int direction);
+extern int gpio_line_get(int line);
+extern void gpio_line_set(int line, int value);
+
+/* GPIO port A. */
+#define EP93XX_GPIO_LINE_A(x) ((x) + 0)
+#define EP93XX_GPIO_LINE_EGPIO0 EP93XX_GPIO_LINE_A(0)
+#define EP93XX_GPIO_LINE_EGPIO1 EP93XX_GPIO_LINE_A(1)
+#define EP93XX_GPIO_LINE_EGPIO2 EP93XX_GPIO_LINE_A(2)
+#define EP93XX_GPIO_LINE_EGPIO3 EP93XX_GPIO_LINE_A(3)
+#define EP93XX_GPIO_LINE_EGPIO4 EP93XX_GPIO_LINE_A(4)
+#define EP93XX_GPIO_LINE_EGPIO5 EP93XX_GPIO_LINE_A(5)
+#define EP93XX_GPIO_LINE_EGPIO6 EP93XX_GPIO_LINE_A(6)
+#define EP93XX_GPIO_LINE_EGPIO7 EP93XX_GPIO_LINE_A(7)
+
+/* GPIO port B. */
+#define EP93XX_GPIO_LINE_B(x) ((x) + 8)
+#define EP93XX_GPIO_LINE_EGPIO8 EP93XX_GPIO_LINE_B(0)
+#define EP93XX_GPIO_LINE_EGPIO9 EP93XX_GPIO_LINE_B(1)
+#define EP93XX_GPIO_LINE_EGPIO10 EP93XX_GPIO_LINE_B(2)
+#define EP93XX_GPIO_LINE_EGPIO11 EP93XX_GPIO_LINE_B(3)
+#define EP93XX_GPIO_LINE_EGPIO12 EP93XX_GPIO_LINE_B(4)
+#define EP93XX_GPIO_LINE_EGPIO13 EP93XX_GPIO_LINE_B(5)
+#define EP93XX_GPIO_LINE_EGPIO14 EP93XX_GPIO_LINE_B(6)
+#define EP93XX_GPIO_LINE_EGPIO15 EP93XX_GPIO_LINE_B(7)
+
+/* GPIO port C. */
+#define EP93XX_GPIO_LINE_C(x) ((x) + 16)
+#define EP93XX_GPIO_LINE_ROW0 EP93XX_GPIO_LINE_C(0)
+#define EP93XX_GPIO_LINE_ROW1 EP93XX_GPIO_LINE_C(1)
+#define EP93XX_GPIO_LINE_ROW2 EP93XX_GPIO_LINE_C(2)
+#define EP93XX_GPIO_LINE_ROW3 EP93XX_GPIO_LINE_C(3)
+#define EP93XX_GPIO_LINE_ROW4 EP93XX_GPIO_LINE_C(4)
+#define EP93XX_GPIO_LINE_ROW5 EP93XX_GPIO_LINE_C(5)
+#define EP93XX_GPIO_LINE_ROW6 EP93XX_GPIO_LINE_C(6)
+#define EP93XX_GPIO_LINE_ROW7 EP93XX_GPIO_LINE_C(7)
+
+/* GPIO port D. */
+#define EP93XX_GPIO_LINE_D(x) ((x) + 24)
+#define EP93XX_GPIO_LINE_COL0 EP93XX_GPIO_LINE_D(0)
+#define EP93XX_GPIO_LINE_COL1 EP93XX_GPIO_LINE_D(1)
+#define EP93XX_GPIO_LINE_COL2 EP93XX_GPIO_LINE_D(2)
+#define EP93XX_GPIO_LINE_COL3 EP93XX_GPIO_LINE_D(3)
+#define EP93XX_GPIO_LINE_COL4 EP93XX_GPIO_LINE_D(4)
+#define EP93XX_GPIO_LINE_COL5 EP93XX_GPIO_LINE_D(5)
+#define EP93XX_GPIO_LINE_COL6 EP93XX_GPIO_LINE_D(6)
+#define EP93XX_GPIO_LINE_COL7 EP93XX_GPIO_LINE_D(7)
+
+/* GPIO port E. */
+#define EP93XX_GPIO_LINE_E(x) ((x) + 32)
+#define EP93XX_GPIO_LINE_GRLED EP93XX_GPIO_LINE_E(0)
+#define EP93XX_GPIO_LINE_RDLED EP93XX_GPIO_LINE_E(1)
+#define EP93XX_GPIO_LINE_DIORn EP93XX_GPIO_LINE_E(2)
+#define EP93XX_GPIO_LINE_IDECS1n EP93XX_GPIO_LINE_E(3)
+#define EP93XX_GPIO_LINE_IDECS2n EP93XX_GPIO_LINE_E(4)
+#define EP93XX_GPIO_LINE_IDEDA0 EP93XX_GPIO_LINE_E(5)
+#define EP93XX_GPIO_LINE_IDEDA1 EP93XX_GPIO_LINE_E(6)
+#define EP93XX_GPIO_LINE_IDEDA2 EP93XX_GPIO_LINE_E(7)
+
+/* GPIO port F. */
+#define EP93XX_GPIO_LINE_F(x) ((x) + 40)
+#define EP93XX_GPIO_LINE_WP EP93XX_GPIO_LINE_F(0)
+#define EP93XX_GPIO_LINE_MCCD1 EP93XX_GPIO_LINE_F(1)
+#define EP93XX_GPIO_LINE_MCCD2 EP93XX_GPIO_LINE_F(2)
+#define EP93XX_GPIO_LINE_MCBVD1 EP93XX_GPIO_LINE_F(3)
+#define EP93XX_GPIO_LINE_MCBVD2 EP93XX_GPIO_LINE_F(4)
+#define EP93XX_GPIO_LINE_VS1 EP93XX_GPIO_LINE_F(5)
+#define EP93XX_GPIO_LINE_READY EP93XX_GPIO_LINE_F(6)
+#define EP93XX_GPIO_LINE_VS2 EP93XX_GPIO_LINE_F(7)
+
+/* GPIO port G. */
+#define EP93XX_GPIO_LINE_G(x) ((x) + 48)
+#define EP93XX_GPIO_LINE_EECLK EP93XX_GPIO_LINE_G(0)
+#define EP93XX_GPIO_LINE_EEDAT EP93XX_GPIO_LINE_G(1)
+#define EP93XX_GPIO_LINE_SLA0 EP93XX_GPIO_LINE_G(2)
+#define EP93XX_GPIO_LINE_SLA1 EP93XX_GPIO_LINE_G(3)
+#define EP93XX_GPIO_LINE_DD12 EP93XX_GPIO_LINE_G(4)
+#define EP93XX_GPIO_LINE_DD13 EP93XX_GPIO_LINE_G(5)
+#define EP93XX_GPIO_LINE_DD14 EP93XX_GPIO_LINE_G(6)
+#define EP93XX_GPIO_LINE_DD15 EP93XX_GPIO_LINE_G(7)
+
+/* GPIO port H. */
+#define EP93XX_GPIO_LINE_H(x) ((x) + 56)
+#define EP93XX_GPIO_LINE_DD0 EP93XX_GPIO_LINE_H(0)
+#define EP93XX_GPIO_LINE_DD1 EP93XX_GPIO_LINE_H(1)
+#define EP93XX_GPIO_LINE_DD2 EP93XX_GPIO_LINE_H(2)
+#define EP93XX_GPIO_LINE_DD3 EP93XX_GPIO_LINE_H(3)
+#define EP93XX_GPIO_LINE_DD4 EP93XX_GPIO_LINE_H(4)
+#define EP93XX_GPIO_LINE_DD5 EP93XX_GPIO_LINE_H(5)
+#define EP93XX_GPIO_LINE_DD6 EP93XX_GPIO_LINE_H(6)
+#define EP93XX_GPIO_LINE_DD7 EP93XX_GPIO_LINE_H(7)
+
+
+#endif
diff --git a/include/asm-arm/arch-ep93xx/hardware.h b/include/asm-arm/arch-ep93xx/hardware.h
new file mode 100644
index 0000000..9b69f45
--- /dev/null
+++ b/include/asm-arm/arch-ep93xx/hardware.h
@@ -0,0 +1,12 @@
+/*
+ * linux/include/asm-arm/arch-ep93xx/hardware.h
+ */
+
+#include "ep93xx-regs.h"
+
+#define pcibios_assign_all_busses() 0
+
+#include "platform.h"
+
+#include "gesbc9312.h"
+#include "ts72xx.h"
diff --git a/include/asm-arm/arch-ep93xx/io.h b/include/asm-arm/arch-ep93xx/io.h
new file mode 100644
index 0000000..7b4d25e
--- /dev/null
+++ b/include/asm-arm/arch-ep93xx/io.h
@@ -0,0 +1,8 @@
+/*
+ * linux/include/asm-arm/arch-ep93xx/io.h
+ */
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(p) ((void __iomem *)(p))
+#define __mem_pci(p) (p)
diff --git a/include/asm-arm/arch-ep93xx/irqs.h b/include/asm-arm/arch-ep93xx/irqs.h
new file mode 100644
index 0000000..9a42f5d
--- /dev/null
+++ b/include/asm-arm/arch-ep93xx/irqs.h
@@ -0,0 +1,80 @@
+/*
+ * linux/include/asm-arm/arch-ep93xx/irqs.h
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#define IRQ_EP93XX_COMMRX 2
+#define IRQ_EP93XX_COMMTX 3
+#define IRQ_EP93XX_TIMER1 4
+#define IRQ_EP93XX_TIMER2 5
+#define IRQ_EP93XX_AACINTR 6
+#define IRQ_EP93XX_DMAM2P0 7
+#define IRQ_EP93XX_DMAM2P1 8
+#define IRQ_EP93XX_DMAM2P2 9
+#define IRQ_EP93XX_DMAM2P3 10
+#define IRQ_EP93XX_DMAM2P4 11
+#define IRQ_EP93XX_DMAM2P5 12
+#define IRQ_EP93XX_DMAM2P6 13
+#define IRQ_EP93XX_DMAM2P7 14
+#define IRQ_EP93XX_DMAM2P8 15
+#define IRQ_EP93XX_DMAM2P9 16
+#define IRQ_EP93XX_DMAM2M0 17
+#define IRQ_EP93XX_DMAM2M1 18
+#define IRQ_EP93XX_GPIO0MUX 20
+#define IRQ_EP93XX_GPIO1MUX 21
+#define IRQ_EP93XX_GPIO2MUX 22
+#define IRQ_EP93XX_GPIO3MUX 22
+#define IRQ_EP93XX_UART1RX 23
+#define IRQ_EP93XX_UART1TX 24
+#define IRQ_EP93XX_UART2RX 25
+#define IRQ_EP93XX_UART2TX 26
+#define IRQ_EP93XX_UART3RX 27
+#define IRQ_EP93XX_UART3TX 28
+#define IRQ_EP93XX_KEY 29
+#define IRQ_EP93XX_TOUCH 30
+#define EP93XX_VIC1_VALID_IRQ_MASK 0x7ffffffc
+
+#define IRQ_EP93XX_EXT0 32
+#define IRQ_EP93XX_EXT1 33
+#define IRQ_EP93XX_EXT2 34
+#define IRQ_EP93XX_64HZ 35
+#define IRQ_EP93XX_WATCHDOG 36
+#define IRQ_EP93XX_RTC 37
+#define IRQ_EP93XX_IRDA 38
+#define IRQ_EP93XX_ETHERNET 39
+#define IRQ_EP93XX_EXT3 40
+#define IRQ_EP93XX_PROG 41
+#define IRQ_EP93XX_1HZ 42
+#define IRQ_EP93XX_VSYNC 43
+#define IRQ_EP93XX_VIDEO_FIFO 44
+#define IRQ_EP93XX_SSP1RX 45
+#define IRQ_EP93XX_SSP1TX 46
+#define IRQ_EP93XX_GPIO4MUX 47
+#define IRQ_EP93XX_GPIO5MUX 48
+#define IRQ_EP93XX_GPIO6MUX 49
+#define IRQ_EP93XX_GPIO7MUX 50
+#define IRQ_EP93XX_TIMER3 51
+#define IRQ_EP93XX_UART1 52
+#define IRQ_EP93XX_SSP 53
+#define IRQ_EP93XX_UART2 54
+#define IRQ_EP93XX_UART3 55
+#define IRQ_EP93XX_USB 56
+#define IRQ_EP93XX_ETHERNET_PME 57
+#define IRQ_EP93XX_DSP 58
+#define IRQ_EP93XX_GPIO_AB 59
+#define IRQ_EP93XX_SAI 60
+#define EP93XX_VIC2_VALID_IRQ_MASK 0x1fffffff
+
+#define IRQ_EP93XX_GPIO(x) (64 + (x))
+
+#define NR_EP93XX_IRQS IRQ_EP93XX_GPIO(16)
+
+#define EP93XX_BOARD_IRQ(x) (NR_EP93XX_IRQS + (x))
+#define EP93XX_BOARD_IRQS 32
+
+#define NR_IRQS (NR_EP93XX_IRQS + EP93XX_BOARD_IRQS)
+
+
+#endif
diff --git a/include/asm-arm/arch-ep93xx/memory.h b/include/asm-arm/arch-ep93xx/memory.h
new file mode 100644
index 0000000..4b1a5c7
--- /dev/null
+++ b/include/asm-arm/arch-ep93xx/memory.h
@@ -0,0 +1,14 @@
+/*
+ * linux/include/asm-arm/arch-ep93xx/memory.h
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET UL(0x00000000)
+
+#define __bus_to_virt(x) __phys_to_virt(x)
+#define __virt_to_bus(x) __virt_to_phys(x)
+
+
+#endif
diff --git a/include/asm-arm/arch-ep93xx/platform.h b/include/asm-arm/arch-ep93xx/platform.h
new file mode 100644
index 0000000..df9cbb6
--- /dev/null
+++ b/include/asm-arm/arch-ep93xx/platform.h
@@ -0,0 +1,14 @@
+/*
+ * linux/include/asm-arm/arch-ep93xx/platform.h
+ */
+
+#ifndef __ASSEMBLY__
+
+void ep93xx_map_io(void);
+void ep93xx_init_irq(void);
+void ep93xx_init_time(unsigned long);
+void ep93xx_init_devices(void);
+extern struct sys_timer ep93xx_timer;
+
+
+#endif
diff --git a/include/asm-arm/arch-ep93xx/system.h b/include/asm-arm/arch-ep93xx/system.h
new file mode 100644
index 0000000..79b7185
--- /dev/null
+++ b/include/asm-arm/arch-ep93xx/system.h
@@ -0,0 +1,26 @@
+/*
+ * linux/include/asm-arm/arch-ep93xx/system.h
+ */
+
+#include <asm/hardware.h>
+
+static inline void arch_idle(void)
+{
+ cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+ u32 devicecfg;
+
+ local_irq_disable();
+
+ devicecfg = __raw_readl(EP93XX_SYSCON_DEVICE_CONFIG);
+ __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
+ __raw_writel(devicecfg | 0x80000000, EP93XX_SYSCON_DEVICE_CONFIG);
+ __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
+ __raw_writel(devicecfg & ~0x80000000, EP93XX_SYSCON_DEVICE_CONFIG);
+
+ while (1)
+ ;
+}
diff --git a/include/asm-arm/arch-ep93xx/timex.h b/include/asm-arm/arch-ep93xx/timex.h
new file mode 100644
index 0000000..4140bdd
--- /dev/null
+++ b/include/asm-arm/arch-ep93xx/timex.h
@@ -0,0 +1,5 @@
+/*
+ * linux/include/asm-arm/arch-ep93xx/timex.h
+ */
+
+#define CLOCK_TICK_RATE 983040
diff --git a/include/asm-arm/arch-ep93xx/ts72xx.h b/include/asm-arm/arch-ep93xx/ts72xx.h
new file mode 100644
index 0000000..412215e
--- /dev/null
+++ b/include/asm-arm/arch-ep93xx/ts72xx.h
@@ -0,0 +1,90 @@
+/*
+ * linux/include/asm-arm/arch-ep93xx/ts72xx.h
+ */
+
+/*
+ * TS72xx memory map:
+ *
+ * virt phys size
+ * febff000 22000000 4K model number register
+ * febfe000 22400000 4K options register
+ * febfd000 22800000 4K options register #2
+ * febfc000 [67]0000000 4K NAND data register
+ * febfb000 [67]0400000 4K NAND control register
+ * febfa000 [67]0800000 4K NAND busy register
+ */
+
+#define TS72XX_MODEL_PHYS_BASE 0x22000000
+#define TS72XX_MODEL_VIRT_BASE 0xfebff000
+#define TS72XX_MODEL_SIZE 0x00001000
+
+#define TS72XX_MODEL_TS7200 0x00
+#define TS72XX_MODEL_TS7250 0x01
+#define TS72XX_MODEL_TS7260 0x02
+
+
+#define TS72XX_OPTIONS_PHYS_BASE 0x22400000
+#define TS72XX_OPTIONS_VIRT_BASE 0xfebfe000
+#define TS72XX_OPTIONS_SIZE 0x00001000
+
+#define TS72XX_OPTIONS_COM2_RS485 0x02
+#define TS72XX_OPTIONS_MAX197 0x01
+
+
+#define TS72XX_OPTIONS2_PHYS_BASE 0x22800000
+#define TS72XX_OPTIONS2_VIRT_BASE 0xfebfd000
+#define TS72XX_OPTIONS2_SIZE 0x00001000
+
+#define TS72XX_OPTIONS2_TS9420 0x04
+#define TS72XX_OPTIONS2_TS9420_BOOT 0x02
+
+
+#define TS72XX_NOR_PHYS_BASE 0x60000000
+#define TS72XX_NOR2_PHYS_BASE 0x62000000
+
+#define TS72XX_NAND1_DATA_PHYS_BASE 0x60000000
+#define TS72XX_NAND2_DATA_PHYS_BASE 0x70000000
+#define TS72XX_NAND_DATA_VIRT_BASE 0xfebfc000
+#define TS72XX_NAND_DATA_SIZE 0x00001000
+
+#define TS72XX_NAND1_CONTROL_PHYS_BASE 0x60400000
+#define TS72XX_NAND2_CONTROL_PHYS_BASE 0x70400000
+#define TS72XX_NAND_CONTROL_VIRT_BASE 0xfebfb000
+#define TS72XX_NAND_CONTROL_SIZE 0x00001000
+
+#define TS72XX_NAND1_BUSY_PHYS_BASE 0x60800000
+#define TS72XX_NAND2_BUSY_PHYS_BASE 0x70800000
+#define TS72XX_NAND_BUSY_VIRT_BASE 0xfebfa000
+#define TS72XX_NAND_BUSY_SIZE 0x00001000
+
+
+#ifndef __ASSEMBLY__
+#include <asm/io.h>
+
+static inline int board_is_ts7200(void)
+{
+ return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7200;
+}
+
+static inline int board_is_ts7250(void)
+{
+ return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7250;
+}
+
+static inline int board_is_ts7260(void)
+{
+ return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7260;
+}
+
+static inline int is_max197_installed(void)
+{
+ return !!(__raw_readb(TS72XX_OPTIONS_VIRT_BASE) &
+ TS72XX_OPTIONS_MAX197);
+}
+
+static inline int is_ts9420_installed(void)
+{
+ return !!(__raw_readb(TS72XX_OPTIONS2_VIRT_BASE) &
+ TS72XX_OPTIONS2_TS9420);
+}
+#endif
diff --git a/include/asm-arm/arch-ep93xx/uncompress.h b/include/asm-arm/arch-ep93xx/uncompress.h
new file mode 100644
index 0000000..4410d21
--- /dev/null
+++ b/include/asm-arm/arch-ep93xx/uncompress.h
@@ -0,0 +1,53 @@
+/*
+ * linux/include/asm-arm/arch-ep93xx/uncompress.h
+ *
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#include <asm/arch/ep93xx-regs.h>
+
+static unsigned char __raw_readb(unsigned int ptr)
+{
+ return *((volatile unsigned char *)ptr);
+}
+
+static void __raw_writeb(unsigned char value, unsigned int ptr)
+{
+ *((volatile unsigned char *)ptr) = value;
+}
+
+
+#define PHYS_UART1_DATA 0x808c0000
+#define PHYS_UART1_FLAG 0x808c0018
+#define UART1_FLAG_TXFF 0x20
+
+static __inline__ void putc(char c)
+{
+ int i;
+
+ for (i = 0; i < 1000; i++) {
+ /* Transmit fifo not full? */
+ if (!(__raw_readb(PHYS_UART1_FLAG) & UART1_FLAG_TXFF))
+ break;
+ }
+
+ __raw_writeb(c, PHYS_UART1_DATA);
+}
+
+static void putstr(const char *s)
+{
+ while (*s) {
+ putc(*s);
+ if (*s == '\n')
+ putc('\r');
+ s++;
+ }
+}
+
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-ep93xx/vmalloc.h b/include/asm-arm/arch-ep93xx/vmalloc.h
new file mode 100644
index 0000000..205ea6b
--- /dev/null
+++ b/include/asm-arm/arch-ep93xx/vmalloc.h
@@ -0,0 +1,5 @@
+/*
+ * linux/include/asm-arm/arch-ep93xx/vmalloc.h
+ */
+
+#define VMALLOC_END 0xfe800000
diff --git a/include/asm-arm/arch-h720x/irq.h b/include/asm-arm/arch-h720x/irq.h
deleted file mode 100644
index b3821e9..0000000
--- a/include/asm-arm/arch-h720x/irq.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * include/asm-arm/arch-h720x/irq.h
- *
- * Copyright (C) 2000-2002 Jungjun Kim
- * (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>
- * (C) 2003 Thomas Gleixner <tglx@linutronix.de>
- */
-
-#ifndef __ASM_ARCH_IRQ_H
-#define __ASM_ARCH_IRQ_H
-
-extern void __init h720x_init_irq (void);
-
-#endif /* __ASM_ARCH_IRQ_H */
diff --git a/include/asm-arm/arch-h720x/param.h b/include/asm-arm/arch-h720x/param.h
deleted file mode 100644
index 2b80235..0000000
--- a/include/asm-arm/arch-h720x/param.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- * linux/include/asm-arm/arch-h720x/param.h
- *
- * Copyright (C) 2000 Jungjun Kim
- */
-
-#ifndef __ASM_ARCH_PARAM_H
-#define __ASM_ARCH_PARAM_H
-
-#endif
diff --git a/include/asm-arm/arch-imx/irq.h b/include/asm-arm/arch-imx/irq.h
deleted file mode 100644
index 545e065..0000000
--- a/include/asm-arm/arch-imx/irq.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * linux/include/asm-arm/arch-imxads/irq.h
- *
- * Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define fixup_irq(i) (i)
diff --git a/include/asm-arm/arch-imx/param.h b/include/asm-arm/arch-imx/param.h
deleted file mode 100644
index 7c724f0..0000000
--- a/include/asm-arm/arch-imx/param.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * linux/include/asm-arm/arch-imx/param.h
- *
- * Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
diff --git a/include/asm-arm/arch-integrator/debug-macro.S b/include/asm-arm/arch-integrator/debug-macro.S
index 031d309..85b327c 100644
--- a/include/asm-arm/arch-integrator/debug-macro.S
+++ b/include/asm-arm/arch-integrator/debug-macro.S
@@ -11,8 +11,6 @@
*
*/
-#include <linux/amba/serial.h>
-
.macro addruart,rx
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
@@ -21,18 +19,4 @@
addne \rx, \rx, #0x16000000 >> 4
.endm
- .macro senduart,rd,rx
- strb \rd, [\rx, #UART01x_DR]
- .endm
-
- .macro waituart,rd,rx
-1001: ldr \rd, [\rx, #0x18] @ UARTFLG
- tst \rd, #1 << 5 @ UARTFLGUTXFF - 1 when full
- bne 1001b
- .endm
-
- .macro busyuart,rd,rx
-1001: ldr \rd, [\rx, #0x18] @ UARTFLG
- tst \rd, #1 << 3 @ UARTFLGUBUSY - 1 when busy
- bne 1001b
- .endm
+#include <asm/hardware/debug-pl01x.S>
diff --git a/include/asm-arm/arch-integrator/param.h b/include/asm-arm/arch-integrator/param.h
deleted file mode 100644
index afa582f..0000000
--- a/include/asm-arm/arch-integrator/param.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * linux/include/asm-arm/arch-integrator/param.h
- *
- * Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
diff --git a/include/asm-arm/arch-iop3xx/debug-macro.S b/include/asm-arm/arch-iop3xx/debug-macro.S
index cc15f80..ce007e5 100644
--- a/include/asm-arm/arch-iop3xx/debug-macro.S
+++ b/include/asm-arm/arch-iop3xx/debug-macro.S
@@ -28,21 +28,8 @@
#endif
.endm
- .macro senduart,rd,rx
- strb \rd, [\rx]
- .endm
-
- .macro busyuart,rd,rx
-1002: ldrb \rd, [\rx, #0x5]
- and \rd, \rd, #0x60
- teq \rd, #0x60
- bne 1002b
- .endm
-
- .macro waituart,rd,rx
#if !defined(CONFIG_ARCH_IQ80321) || !defined(CONFIG_ARCH_IQ31244) || !defined(CONFIG_ARCH_IQ80331)
-1001: ldrb \rd, [\rx, #0x6]
- tst \rd, #0x10
- beq 1001b
+#define FLOW_CONTROL
#endif
- .endm
+#define UART_SHIFT 0
+#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-iop3xx/param.h b/include/asm-arm/arch-iop3xx/param.h
deleted file mode 100644
index acf404e..0000000
--- a/include/asm-arm/arch-iop3xx/param.h
+++ /dev/null
@@ -1,3 +0,0 @@
-/*
- * linux/include/asm-arm/arch-iop3xx/param.h
- */
diff --git a/include/asm-arm/arch-ixp2000/debug-macro.S b/include/asm-arm/arch-ixp2000/debug-macro.S
index 5631e08..bc8b396 100644
--- a/include/asm-arm/arch-ixp2000/debug-macro.S
+++ b/include/asm-arm/arch-ixp2000/debug-macro.S
@@ -23,18 +23,5 @@
#endif
.endm
- .macro senduart,rd,rx
- strb \rd, [\rx]
- .endm
-
- .macro busyuart,rd,rx
-1002: ldrb \rd, [\rx, #0x14]
- tst \rd, #0x20
- beq 1002b
- .endm
-
- .macro waituart,rd,rx
- nop
- nop
- nop
- .endm
+#define UART_SHIFT 2
+#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-ixp2000/irq.h b/include/asm-arm/arch-ixp2000/irq.h
deleted file mode 100644
index ba00b23..0000000
--- a/include/asm-arm/arch-ixp2000/irq.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ixp2000/irq.h
- *
- * Copyright (C) 2002 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#define fixup_irq(irq) (irq)
-
-
diff --git a/include/asm-arm/arch-ixp2000/ixdp2x00.h b/include/asm-arm/arch-ixp2000/ixdp2x00.h
index 229381c..546e2e8 100644
--- a/include/asm-arm/arch-ixp2000/ixdp2x00.h
+++ b/include/asm-arm/arch-ixp2000/ixdp2x00.h
@@ -72,12 +72,11 @@
#ifndef __ASSEMBLY__
/*
- * Master NPU will always have flash and be PCI master.
- * Slave NPU may or may not have flash but will never be PCI master.
+ * The master NPU is always PCI master.
*/
static inline unsigned int ixdp2x00_master_npu(void)
{
- return ((ixp2000_has_flash()) && (ixp2000_is_pcimaster()));
+ return !!ixp2000_is_pcimaster();
}
/*
diff --git a/include/asm-arm/arch-ixp2000/ixp2000-regs.h b/include/asm-arm/arch-ixp2000/ixp2000-regs.h
index 2b57f91..ccae4be 100644
--- a/include/asm-arm/arch-ixp2000/ixp2000-regs.h
+++ b/include/asm-arm/arch-ixp2000/ixp2000-regs.h
@@ -353,8 +353,8 @@
* Masks and shifts for various fields in the WTC and RTC registers.
*/
#define SLOWPORT_WRTC_MASK_HD 0x0003
-#define SLOWPORT_WRTC_MASK_SU 0x003c
-#define SLOWPORT_WRTC_MASK_PW 0x03c0
+#define SLOWPORT_WRTC_MASK_PW 0x003c
+#define SLOWPORT_WRTC_MASK_SU 0x03c0
#define SLOWPORT_WRTC_SHIFT_HD 0x00
#define SLOWPORT_WRTC_SHIFT_SU 0x02
diff --git a/include/asm-arm/arch-ixp2000/param.h b/include/asm-arm/arch-ixp2000/param.h
deleted file mode 100644
index 2646d9e..0000000
--- a/include/asm-arm/arch-ixp2000/param.h
+++ /dev/null
@@ -1,3 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ixp2000/param.h
- */
diff --git a/include/asm-arm/arch-ixp2000/system.h b/include/asm-arm/arch-ixp2000/system.h
index ddbbb34..3cc9a04 100644
--- a/include/asm-arm/arch-ixp2000/system.h
+++ b/include/asm-arm/arch-ixp2000/system.h
@@ -37,7 +37,7 @@
* to cause a complete reset of the CPU and all external devices
* and move the flash bank register back to 0.
*/
- if (machine_is_ixdp2801()) {
+ if (machine_is_ixdp2801() || machine_is_ixdp28x5()) {
unsigned long reset_reg = *IXDP2X01_CPLD_RESET_REG;
reset_reg = 0x55AA0000 | (reset_reg & 0x0000FFFF);
diff --git a/include/asm-arm/arch-ixp4xx/debug-macro.S b/include/asm-arm/arch-ixp4xx/debug-macro.S
index 2e23651..37bc8ef 100644
--- a/include/asm-arm/arch-ixp4xx/debug-macro.S
+++ b/include/asm-arm/arch-ixp4xx/debug-macro.S
@@ -20,16 +20,5 @@
@ byte writes used - Big Endian.
.endm
- .macro senduart,rd,rx
- strb \rd, [\rx]
- .endm
-
- .macro waituart,rd,rx
-1002: ldrb \rd, [\rx, #0x14]
- and \rd, \rd, #0x60 @ check THRE and TEMT bits
- teq \rd, #0x60
- bne 1002b
- .endm
-
- .macro busyuart,rd,rx
- .endm
+#define UART_SHIFT 2
+#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-ixp4xx/irq.h b/include/asm-arm/arch-ixp4xx/irq.h
deleted file mode 100644
index 87da706..0000000
--- a/include/asm-arm/arch-ixp4xx/irq.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * irq.h
- *
- * Copyright (C) 2002 Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#define fixup_irq(irq) (irq)
-
diff --git a/include/asm-arm/arch-ixp4xx/param.h b/include/asm-arm/arch-ixp4xx/param.h
deleted file mode 100644
index 8a75712..0000000
--- a/include/asm-arm/arch-ixp4xx/param.h
+++ /dev/null
@@ -1,3 +0,0 @@
-/*
- * linux/include/asm-arm/arch-ixp4xx/param.h
- */
diff --git a/include/asm-arm/arch-ixp4xx/platform.h b/include/asm-arm/arch-ixp4xx/platform.h
index daf9790..13aee17 100644
--- a/include/asm-arm/arch-ixp4xx/platform.h
+++ b/include/asm-arm/arch-ixp4xx/platform.h
@@ -38,6 +38,33 @@
#define IXP4XX_EXP_BUS_BASE(region)\
(IXP4XX_EXP_BUS_BASE_PHYS + ((region) * ixp4xx_exp_bus_size))
+#define IXP4XX_EXP_BUS_END(region)\
+ (IXP4XX_EXP_BUS_BASE(region) + ixp4xx_exp_bus_size - 1)
+
+/* Those macros can be used to adjust timing and configure
+ * other features for each region.
+ */
+
+#define IXP4XX_EXP_BUS_RECOVERY_T(x) (((x) & 0x0f) << 16)
+#define IXP4XX_EXP_BUS_HOLD_T(x) (((x) & 0x03) << 20)
+#define IXP4XX_EXP_BUS_STROBE_T(x) (((x) & 0x0f) << 22)
+#define IXP4XX_EXP_BUS_SETUP_T(x) (((x) & 0x03) << 26)
+#define IXP4XX_EXP_BUS_ADDR_T(x) (((x) & 0x03) << 28)
+#define IXP4XX_EXP_BUS_SIZE(x) (((x) & 0x0f) << 10)
+#define IXP4XX_EXP_BUS_CYCLES(x) (((x) & 0x03) << 14)
+
+#define IXP4XX_EXP_BUS_CS_EN (1L << 31)
+#define IXP4XX_EXP_BUS_BYTE_RD16 (1L << 6)
+#define IXP4XX_EXP_BUS_HRDY_POL (1L << 5)
+#define IXP4XX_EXP_BUS_MUX_EN (1L << 4)
+#define IXP4XX_EXP_BUS_SPLT_EN (1L << 3)
+#define IXP4XX_EXP_BUS_WR_EN (1L << 1)
+#define IXP4XX_EXP_BUS_BYTE_EN (1L << 0)
+
+#define IXP4XX_EXP_BUS_CYCLES_INTEL 0x00
+#define IXP4XX_EXP_BUS_CYCLES_MOTOROLA 0x01
+#define IXP4XX_EXP_BUS_CYCLES_HPI 0x02
+
#define IXP4XX_FLASH_WRITABLE (0x2)
#define IXP4XX_FLASH_DEFAULT (0xbcd23c40)
#define IXP4XX_FLASH_WRITE (0xbcd23c42)
diff --git a/include/asm-arm/arch-l7200/param.h b/include/asm-arm/arch-l7200/param.h
deleted file mode 100644
index 9962a12..0000000
--- a/include/asm-arm/arch-l7200/param.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * linux/include/asm-arm/arch-l7200/param.h
- *
- * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net)
- * Steve Hill (sjhill@cotw.com)
- *
- * This file contains the hardware definitions for the
- * LinkUp Systems L7200 SOC development board.
- *
- * Changelog:
- * 04-21-2000 RS Created L7200 version
- * 04-25-2000 SJH Cleaned up file
- * 05-03-2000 SJH Change comments and rate
- */
-
-/*
- * See 'time.h' for how the RTC HZ rate is set
- */
-#define HZ 128
diff --git a/include/asm-arm/arch-lh7a40x/irq.h b/include/asm-arm/arch-lh7a40x/irq.h
deleted file mode 100644
index 0f5f0b1..0000000
--- a/include/asm-arm/arch-lh7a40x/irq.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/* include/asm-arm/arch-lh7a40x/irq.h
- *
- * Copyright (C) 2004 Logic Product Development
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- */
-
-void __init lh7a40x_init_board_irq (void);
diff --git a/include/asm-arm/arch-lh7a40x/param.h b/include/asm-arm/arch-lh7a40x/param.h
deleted file mode 100644
index acad0bc..0000000
--- a/include/asm-arm/arch-lh7a40x/param.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/* include/asm-arm/arch-lh7a40x/param.h
- *
- * Copyright (C) 2004 Coastal Environmental Systems
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- */
diff --git a/include/asm-arm/arch-omap/param.h b/include/asm-arm/arch-omap/param.h
deleted file mode 100644
index face9ad..0000000
--- a/include/asm-arm/arch-omap/param.h
+++ /dev/null
@@ -1,8 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/param.h
- *
- */
-
-#ifdef CONFIG_OMAP_32K_TIMER_HZ
-#define HZ CONFIG_OMAP_32K_TIMER_HZ
-#endif
diff --git a/include/asm-arm/arch-pxa/debug-macro.S b/include/asm-arm/arch-pxa/debug-macro.S
index b6ec688..9012cbc 100644
--- a/include/asm-arm/arch-pxa/debug-macro.S
+++ b/include/asm-arm/arch-pxa/debug-macro.S
@@ -21,18 +21,5 @@
orr \rx, \rx, #0x00100000
.endm
- .macro senduart,rd,rx
- str \rd, [\rx, #0]
- .endm
-
- .macro busyuart,rd,rx
-1002: ldr \rd, [\rx, #0x14]
- tst \rd, #(1 << 6)
- beq 1002b
- .endm
-
- .macro waituart,rd,rx
-1001: ldr \rd, [\rx, #0x14]
- tst \rd, #(1 << 5)
- beq 1001b
- .endm
+#define UART_SHIFT 2
+#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-pxa/irq.h b/include/asm-arm/arch-pxa/irq.h
deleted file mode 100644
index 48c60f5..0000000
--- a/include/asm-arm/arch-pxa/irq.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * linux/include/asm-arm/arch-pxa/irq.h
- *
- * Author: Nicolas Pitre
- * Created: Jun 15, 2001
- * Copyright: MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#define fixup_irq(x) (x)
-
diff --git a/include/asm-arm/arch-pxa/param.h b/include/asm-arm/arch-pxa/param.h
deleted file mode 100644
index 3197d82..0000000
--- a/include/asm-arm/arch-pxa/param.h
+++ /dev/null
@@ -1,3 +0,0 @@
-/*
- * linux/include/asm-arm/arch-pxa/param.h
- */
diff --git a/include/asm-arm/arch-realview/debug-macro.S b/include/asm-arm/arch-realview/debug-macro.S
index 017ad99..f17efc6 100644
--- a/include/asm-arm/arch-realview/debug-macro.S
+++ b/include/asm-arm/arch-realview/debug-macro.S
@@ -11,8 +11,6 @@
*
*/
-#include <linux/amba/serial.h>
-
.macro addruart,rx
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
@@ -21,18 +19,4 @@
orr \rx, \rx, #0x00009000
.endm
- .macro senduart,rd,rx
- strb \rd, [\rx, #UART01x_DR]
- .endm
-
- .macro waituart,rd,rx
-1001: ldr \rd, [\rx, #0x18] @ UARTFLG
- tst \rd, #1 << 5 @ UARTFLGUTXFF - 1 when full
- bne 1001b
- .endm
-
- .macro busyuart,rd,rx
-1001: ldr \rd, [\rx, #0x18] @ UARTFLG
- tst \rd, #1 << 3 @ UARTFLGUBUSY - 1 when busy
- bne 1001b
- .endm
+#include <asm/hardware/debug-pl01x.S>
diff --git a/include/asm-arm/arch-realview/param.h b/include/asm-arm/arch-realview/param.h
deleted file mode 100644
index 89b1235..0000000
--- a/include/asm-arm/arch-realview/param.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * linux/include/asm-arm/arch-realview/param.h
- *
- * Copyright (C) 2002 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
diff --git a/include/asm-arm/arch-rpc/debug-macro.S b/include/asm-arm/arch-rpc/debug-macro.S
index 456d3d7..c634c8d 100644
--- a/include/asm-arm/arch-rpc/debug-macro.S
+++ b/include/asm-arm/arch-rpc/debug-macro.S
@@ -20,19 +20,6 @@
orr \rx, \rx, #0x00000fe0
.endm
- .macro senduart,rd,rx
- strb \rd, [\rx]
- .endm
-
- .macro busyuart,rd,rx
-1001: ldrb \rd, [\rx, #0x14]
- and \rd, \rd, #0x60
- teq \rd, #0x60
- bne 1001b
- .endm
-
- .macro waituart,rd,rx
-1001: ldrb \rd, [\rx, #0x18]
- tst \rd, #0x10
- beq 1001b
- .endm
+#define UART_SHIFT 2
+#define FLOW_CONTROL
+#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-rpc/param.h b/include/asm-arm/arch-rpc/param.h
deleted file mode 100644
index 721dcd6..0000000
--- a/include/asm-arm/arch-rpc/param.h
+++ /dev/null
@@ -1,3 +0,0 @@
-/*
- * linux/include/asm-arm/arch-rpc/param.h
- */
diff --git a/include/asm-arm/arch-s3c2410/osiris-cpld.h b/include/asm-arm/arch-s3c2410/osiris-cpld.h
new file mode 100644
index 0000000..e9d1ae1
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/osiris-cpld.h
@@ -0,0 +1,25 @@
+/* linux/include/asm-arm/arch-s3c2410/osiris-cpld.h
+ *
+ * (c) 2005 Simtec Electronics
+ * http://www.simtec.co.uk/products/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * OSIRIS - CPLD control constants
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_OSIRISCPLD_H
+#define __ASM_ARCH_OSIRISCPLD_H
+
+/* CTRL1 - NAND WP control */
+
+#define OSIRIS_CTRL1_NANDSEL (0x3)
+#define OSIRIS_CTRL1_BOOT_INT (1<<3)
+#define OSIRIS_CTRL1_PCMCIA (1<<4)
+#define OSIRIS_CTRL1_PCMCIA_nWAIT (1<<6)
+#define OSIRIS_CTRL1_PCMCIA_nIOIS16 (1<<7)
+
+#endif /* __ASM_ARCH_OSIRISCPLD_H */
diff --git a/include/asm-arm/arch-s3c2410/osiris-map.h b/include/asm-arm/arch-s3c2410/osiris-map.h
new file mode 100644
index 0000000..7c4b0cd
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/osiris-map.h
@@ -0,0 +1,41 @@
+/* linux/include/asm-arm/arch-s3c2410/osiris-map.h
+ *
+ * (c) 2005 Simtec Electronics
+ * http://www.simtec.co.uk/products/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * OSIRIS - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Changelog:
+*/
+
+/* needs arch/map.h including with this */
+
+#ifndef __ASM_ARCH_OSIRISMAP_H
+#define __ASM_ARCH_OSIRISMAP_H
+
+/* start peripherals off after the S3C2410 */
+
+#define OSIRIS_IOADDR(x) (S3C2410_ADDR((x) + 0x05000000))
+
+#define OSIRIS_PA_CPLD (S3C2410_CS1 | (3<<25))
+
+/* we put the CPLD registers next, to get them out of the way */
+
+#define OSIRIS_VA_CTRL1 OSIRIS_IOADDR(0x00000000) /* 0x01300000 */
+#define OSIRIS_PA_CTRL1 (OSIRIS_PA_CPLD)
+
+#define OSIRIS_VA_CTRL2 OSIRIS_IOADDR(0x00100000) /* 0x01400000 */
+#define OSIRIS_PA_CTRL2 (OSIRIS_PA_CPLD + (1<<24))
+
+#define OSIRIS_VA_CTRL3 OSIRIS_IOADDR(0x00200000) /* 0x01500000 */
+#define OSIRIS_PA_CTRL3 (OSIRIS_PA_CPLD + (2<<24))
+
+#define OSIRIS_VA_CTRL4 OSIRIS_IOADDR(0x00300000) /* 0x01600000 */
+#define OSIRIS_PA_CTRL4 (OSIRIS_PA_CPLD + (3<<24))
+
+#endif /* __ASM_ARCH_OSIRISMAP_H */
diff --git a/include/asm-arm/arch-s3c2410/param.h b/include/asm-arm/arch-s3c2410/param.h
deleted file mode 100644
index 483d3f1..0000000
--- a/include/asm-arm/arch-s3c2410/param.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/* linux/include/asm-arm/arch-s3c2410/param.h
- *
- * (c) 2003 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - Machine parameters
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Changelog:
- * 02-Sep-2003 BJD Created file
- * 12-Mar-2004 BJD Added include protection
-*/
-
-#ifndef __ASM_ARCH_PARAM_H
-#define __ASM_ARCH_PARAM_H
-
-/* we cannot get our timer down to 100Hz with the setup as is, but we can
- * manage 200 clock ticks per second... if this is a problem, we can always
- * add a software pre-scaler to the evil timer systems.
-*/
-
-#define HZ 200
-
-#endif /* __ASM_ARCH_PARAM_H */
diff --git a/include/asm-arm/arch-s3c2410/regs-gpio.h b/include/asm-arm/arch-s3c2410/regs-gpio.h
index 9697f93..d257408 100644
--- a/include/asm-arm/arch-s3c2410/regs-gpio.h
+++ b/include/asm-arm/arch-s3c2410/regs-gpio.h
@@ -979,6 +979,7 @@
#define S3C2410_MISCCR_CLK0_HCLK (3<<4)
#define S3C2410_MISCCR_CLK0_PCLK (4<<4)
#define S3C2410_MISCCR_CLK0_DCLK0 (5<<4)
+#define S3C2410_MISCCR_CLK0_MASK (7<<4)
#define S3C2410_MISCCR_CLK1_MPLL (0<<8)
#define S3C2410_MISCCR_CLK1_UPLL (1<<8)
@@ -986,6 +987,7 @@
#define S3C2410_MISCCR_CLK1_HCLK (3<<8)
#define S3C2410_MISCCR_CLK1_PCLK (4<<8)
#define S3C2410_MISCCR_CLK1_DCLK1 (5<<8)
+#define S3C2410_MISCCR_CLK1_MASK (7<<8)
#define S3C2410_MISCCR_USBSUSPND0 (1<<12)
#define S3C2410_MISCCR_USBSUSPND1 (1<<13)
diff --git a/include/asm-arm/arch-sa1100/debug-macro.S b/include/asm-arm/arch-sa1100/debug-macro.S
index 755fa34..267c317 100644
--- a/include/asm-arm/arch-sa1100/debug-macro.S
+++ b/include/asm-arm/arch-sa1100/debug-macro.S
@@ -10,6 +10,7 @@
* published by the Free Software Foundation.
*
*/
+#include <asm/hardware.h>
.macro addruart,rx
mrc p15, 0, \rx, c1, c0
diff --git a/include/asm-arm/arch-sa1100/param.h b/include/asm-arm/arch-sa1100/param.h
deleted file mode 100644
index 8674889..0000000
--- a/include/asm-arm/arch-sa1100/param.h
+++ /dev/null
@@ -1,3 +0,0 @@
-/*
- * linux/include/asm-arm/arch-sa1100/param.h
- */
diff --git a/include/asm-arm/arch-shark/param.h b/include/asm-arm/arch-shark/param.h
deleted file mode 100644
index 997eeb7..0000000
--- a/include/asm-arm/arch-shark/param.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * linux/include/asm-arm/arch-shark/param.h
- *
- * by Alexander Schulz
- */
diff --git a/include/asm-arm/arch-versatile/debug-macro.S b/include/asm-arm/arch-versatile/debug-macro.S
index ef61671..fe106d1 100644
--- a/include/asm-arm/arch-versatile/debug-macro.S
+++ b/include/asm-arm/arch-versatile/debug-macro.S
@@ -11,8 +11,6 @@
*
*/
-#include <linux/amba/serial.h>
-
.macro addruart,rx
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
@@ -22,18 +20,4 @@
orr \rx, \rx, #0x00001000
.endm
- .macro senduart,rd,rx
- strb \rd, [\rx, #UART01x_DR]
- .endm
-
- .macro waituart,rd,rx
-1001: ldr \rd, [\rx, #0x18] @ UARTFLG
- tst \rd, #1 << 5 @ UARTFLGUTXFF - 1 when full
- bne 1001b
- .endm
-
- .macro busyuart,rd,rx
-1001: ldr \rd, [\rx, #0x18] @ UARTFLG
- tst \rd, #1 << 3 @ UARTFLGUBUSY - 1 when busy
- bne 1001b
- .endm
+#include <asm/hardware/debug-pl01x.S>
diff --git a/include/asm-arm/arch-versatile/param.h b/include/asm-arm/arch-versatile/param.h
deleted file mode 100644
index 34b8973..0000000
--- a/include/asm-arm/arch-versatile/param.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * linux/include/asm-arm/arch-versatile/param.h
- *
- * Copyright (C) 2002 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
diff --git a/include/asm-arm/delay.h b/include/asm-arm/delay.h
index 1704360..b2deda1 100644
--- a/include/asm-arm/delay.h
+++ b/include/asm-arm/delay.h
@@ -6,6 +6,8 @@
#ifndef __ASM_ARM_DELAY_H
#define __ASM_ARM_DELAY_H
+#include <asm/param.h> /* HZ */
+
extern void __delay(int loops);
/*
@@ -13,7 +15,7 @@
* it, it means that you're calling udelay() with an out of range value.
*
* With currently imposed limits, this means that we support a max delay
- * of 2000us and 671 bogomips
+ * of 2000us. Further limits: HZ<=1000 and bogomips<=3355
*/
extern void __bad_udelay(void);
@@ -32,10 +34,10 @@
#define MAX_UDELAY_MS 2
-#define udelay(n) \
- (__builtin_constant_p(n) ? \
- ((n) > (MAX_UDELAY_MS * 1000) ? __bad_udelay() : \
- __const_udelay((n) * 0x68dbul)) : \
+#define udelay(n) \
+ (__builtin_constant_p(n) ? \
+ ((n) > (MAX_UDELAY_MS * 1000) ? __bad_udelay() : \
+ __const_udelay((n) * ((2199023U*HZ)>>11))) : \
__udelay(n))
#endif /* defined(_ARM_DELAY_H) */
diff --git a/include/asm-arm/hardware/debug-8250.S b/include/asm-arm/hardware/debug-8250.S
new file mode 100644
index 0000000..4594fea
--- /dev/null
+++ b/include/asm-arm/hardware/debug-8250.S
@@ -0,0 +1,29 @@
+/*
+ * linux/include/asm-arm/hardware/debug-8250.h
+ *
+ * Copyright (C) 1994-1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/serial_reg.h>
+
+ .macro senduart,rd,rx
+ strb \rd, [\rx, #UART_TX << UART_SHIFT]
+ .endm
+
+ .macro busyuart,rd,rx
+1002: ldrb \rd, [\rx, #UART_LSR << UART_SHIFT]
+ and \rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE
+ teq \rd, #UART_LSR_TEMT | UART_LSR_THRE
+ bne 1002b
+ .endm
+
+ .macro waituart,rd,rx
+#ifdef FLOW_CONTROL
+1001: ldrb \rd, [\rx, #UART_MSR << UART_SHIFT]
+ tst \rd, #UART_MSR_CTS
+ beq 1001b
+#endif
+ .endm
diff --git a/include/asm-arm/hardware/debug-pl01x.S b/include/asm-arm/hardware/debug-pl01x.S
new file mode 100644
index 0000000..db0d0f7
--- /dev/null
+++ b/include/asm-arm/hardware/debug-pl01x.S
@@ -0,0 +1,29 @@
+/* linux/include/asm-arm/arch-integrator/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ * Copyright (C) 1994-1999 Russell King
+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+#include <linux/amba/serial.h>
+
+ .macro senduart,rd,rx
+ strb \rd, [\rx, #UART01x_DR]
+ .endm
+
+ .macro waituart,rd,rx
+1001: ldr \rd, [\rx, #UART01x_FR]
+ tst \rd, #UART01x_FR_TXFF
+ bne 1001b
+ .endm
+
+ .macro busyuart,rd,rx
+1001: ldr \rd, [\rx, #UART01x_FR]
+ tst \rd, #UART01x_FR_BUSY
+ bne 1001b
+ .endm
diff --git a/include/asm-arm/arch-ixp2000/uengine.h b/include/asm-arm/hardware/uengine.h
similarity index 100%
rename from include/asm-arm/arch-ixp2000/uengine.h
rename to include/asm-arm/hardware/uengine.h
diff --git a/include/asm-arm/hardware/vic.h b/include/asm-arm/hardware/vic.h
index 81825eb..ed9ca37 100644
--- a/include/asm-arm/hardware/vic.h
+++ b/include/asm-arm/hardware/vic.h
@@ -39,7 +39,7 @@
#define VIC_VECT_CNTL_ENABLE (1 << 5)
#ifndef __ASSEMBLY__
-void vic_init(void __iomem *base, u32 vic_sources);
+void vic_init(void __iomem *base, unsigned int irq_start, u32 vic_sources);
#endif
#endif
diff --git a/include/asm-arm/mach/arch.h b/include/asm-arm/mach/arch.h
index 2cd57b4d..fd2f9bf 100644
--- a/include/asm-arm/mach/arch.h
+++ b/include/asm-arm/mach/arch.h
@@ -10,19 +10,16 @@
#ifndef __ASSEMBLY__
-#include <linux/compiler.h>
-
struct tag;
struct meminfo;
struct sys_timer;
struct machine_desc {
/*
- * Note! The first five elements are used
+ * Note! The first four elements are used
* by assembler code in head-armv.S
*/
unsigned int nr; /* architecture number */
- unsigned int __deprecated phys_ram; /* start of physical ram */
unsigned int phys_io; /* start of physical io */
unsigned int io_pg_offst; /* byte offset for io
* page tabe entry */
diff --git a/include/asm-arm/mach/irq.h b/include/asm-arm/mach/irq.h
index 0ce6ca5..d4d420e 100644
--- a/include/asm-arm/mach/irq.h
+++ b/include/asm-arm/mach/irq.h
@@ -61,7 +61,7 @@
struct irqchip *chip;
struct irqaction *action;
struct list_head pend;
- void *chipdata;
+ void __iomem *base;
void *data;
unsigned int disable_depth;
@@ -74,6 +74,7 @@
unsigned int noautoenable : 1; /* don't automatically enable IRQ */
unsigned int unused :25;
+ unsigned int irqs_unhandled;
struct proc_dir_entry *procdir;
#ifdef CONFIG_SMP
@@ -113,8 +114,8 @@
#define set_irq_handler(irq,handler) __set_irq_handler(irq,handler,0)
#define set_irq_chained_handler(irq,handler) __set_irq_handler(irq,handler,1)
#define set_irq_data(irq,d) do { irq_desc[irq].data = d; } while (0)
-#define set_irq_chipdata(irq,d) do { irq_desc[irq].chipdata = d; } while (0)
-#define get_irq_chipdata(irq) (irq_desc[irq].chipdata)
+#define set_irq_chipdata(irq,d) do { irq_desc[irq].base = d; } while (0)
+#define get_irq_chipdata(irq) (irq_desc[irq].base)
void set_irq_chip(unsigned int irq, struct irqchip *);
void set_irq_flags(unsigned int irq, unsigned int flags);
diff --git a/include/asm-arm/param.h b/include/asm-arm/param.h
index 94223d4d..1580646 100644
--- a/include/asm-arm/param.h
+++ b/include/asm-arm/param.h
@@ -11,12 +11,7 @@
#define __ASM_PARAM_H
#ifdef __KERNEL__
-# include <asm/arch/param.h> /* for kernel version of HZ */
-
-# ifndef HZ
-# define HZ 100 /* Internal kernel timer frequency */
-# endif
-
+# define HZ CONFIG_HZ /* Internal kernel timer frequency */
# define USER_HZ 100 /* User interfaces are in "ticks" */
# define CLOCKS_PER_SEC (USER_HZ) /* like times() */
#else
