blob: 7ed65f78250cc290bc43ad5372d2c907a64bd33a [file] [log] [blame]
.. SPDX-License-Identifier: GPL-2.0-only
Kernel driver sl28cpld
Supported chips:
* Kontron sl28cpld
Prefix: 'sl28cpld'
Datasheet: not available
Authors: Michael Walle <>
The sl28cpld is a board management controller which also exposes a hardware
monitoring controller. At the moment this controller supports a single fan
supervisor. In the future there might be other flavours and additional
hardware monitoring might be supported.
The fan supervisor has a 7 bit counter register and a counter period of 1
second. If the 7 bit counter overflows, the supervisor will automatically
switch to x8 mode to support a wider input range at the loss of
Sysfs entries
The following attributes are supported.
======================= ========================================================
fan1_input Fan RPM. Assuming 2 pulses per revolution.
======================= ========================================================