diff --git a/drivers/staging/rt2860/2860_main_dev.c b/drivers/staging/rt2860/2860_main_dev.c
index 0ac092f..c7038e0 100644
--- a/drivers/staging/rt2860/2860_main_dev.c
+++ b/drivers/staging/rt2860/2860_main_dev.c
@@ -477,8 +477,7 @@
 
 	pAd->int_pending &= ~(INT_RX);
 
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		bReschedule = STARxDoneInterruptHandle(pAd, 0);
+	bReschedule = STARxDoneInterruptHandle(pAd, 0);
 
 	RTMP_INT_LOCK(&pAd->irq_lock, flags);
 	/*
@@ -914,11 +913,8 @@
 		RTMPHandleTBTTInterrupt(pAd);
 	}
 
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		if (IntSource.word & AutoWakeupInt)
-			RTMPHandleTwakeupInterrupt(pAd);
-	}
+	if (IntSource.word & AutoWakeupInt)
+		RTMPHandleTwakeupInterrupt(pAd);
 
     return  IRQ_HANDLED;
 }
diff --git a/drivers/staging/rt2860/common/action.c b/drivers/staging/rt2860/common/action.c
index 8d40e15..c270ccd 100644
--- a/drivers/staging/rt2860/common/action.c
+++ b/drivers/staging/rt2860/common/action.c
@@ -125,7 +125,6 @@
 			pBAEntry =&pAd->BATable.BAOriEntry[Idx];
 		}
 
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 			if (ADHOC_ON(pAd))
 				ActHeaderInit(pAd, &Frame.Hdr, pInfo->pAddr, pAd->CurrentAddress, pAd->CommonCfg.Bssid);
@@ -207,8 +206,7 @@
 		// SEND BAR (Send BAR to refresh peer reordering buffer.)
 		Idx = pAd->MacTab.Content[pInfo->Wcid].BAOriWcidArray[pInfo->TID];
 
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-			BarHeaderInit(pAd, &FrameBar, pAd->MacTab.Content[pInfo->Wcid].Addr, pAd->CurrentAddress);
+		BarHeaderInit(pAd, &FrameBar, pAd->MacTab.Content[pInfo->Wcid].Addr, pAd->CurrentAddress);
 
 		FrameBar.StartingSeq.field.FragNum = 0; // make sure sequence not clear in DEL funciton.
 		FrameBar.StartingSeq.field.StartSeq = pAd->MacTab.Content[pInfo->Wcid].TxSeq[pInfo->TID]; // make sure sequence not clear in DEL funciton.
@@ -227,7 +225,6 @@
 		// SEND DELBA FRAME
 		FrameLen = 0;
 
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 			if (ADHOC_ON(pAd))
 				ActHeaderInit(pAd, &Frame.Hdr, pAd->MacTab.Content[pInfo->Wcid].Addr, pAd->CurrentAddress, pAd->CommonCfg.Bssid);
@@ -357,7 +354,6 @@
 
 	NdisZeroMemory(&HTINFOframe, sizeof(FRAME_HT_INFO));
 	// 2-1. Prepare ADDBA Response frame.
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		if (ADHOC_ON(pAd))
 			ActHeaderInit(pAd, &HTINFOframe.Hdr, pAddr, pAd->CurrentAddress, pAd->CommonCfg.Bssid);
@@ -522,8 +518,7 @@
 
 			Sequence = pEntry->TxSeq[TID];
 
-			IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-				BarHeaderInit(pAd, &FrameBar, pEntry->Addr, pAd->CurrentAddress);
+			BarHeaderInit(pAd, &FrameBar, pEntry->Addr, pAd->CurrentAddress);
 
 			FrameBar.StartingSeq.field.FragNum = 0; // make sure sequence not clear in DEL function.
 			FrameBar.StartingSeq.field.StartSeq = Sequence; // make sure sequence not clear in DEL funciton.
diff --git a/drivers/staging/rt2860/common/ba_action.c b/drivers/staging/rt2860/common/ba_action.c
index 8877f81..6f51bd2 100644
--- a/drivers/staging/rt2860/common/ba_action.c
+++ b/drivers/staging/rt2860/common/ba_action.c
@@ -130,8 +130,7 @@
 		// pass this 802.3 packet to upper layer or forward this packet to WM directly
 		//
 
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-			ANNOUNCE_OR_FORWARD_802_3_PACKET(pAd, pPacket, RTMP_GET_PACKET_IF(pPacket));
+		ANNOUNCE_OR_FORWARD_802_3_PACKET(pAd, pPacket, RTMP_GET_PACKET_IF(pPacket));
 	}
 }
 
@@ -606,8 +605,7 @@
 			return;
 		}
 
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-			BarHeaderInit(pAd, &FrameBar, pAd->MacTab.Content[pBAEntry->Wcid].Addr, pAd->CurrentAddress);
+		BarHeaderInit(pAd, &FrameBar, pAd->MacTab.Content[pBAEntry->Wcid].Addr, pAd->CurrentAddress);
 
 		FrameBar.StartingSeq.field.FragNum = 0;	// make sure sequence not clear in DEL function.
 		FrameBar.StartingSeq.field.StartSeq = pBAEntry->Sequence; // make sure sequence not clear in DEL funciton.
@@ -1076,12 +1074,9 @@
 
 	pAd = pBAEntry->pAdapter;
 
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		// Do nothing if monitor mode is on
-		if (MONITOR_ON(pAd))
-			return;
-	}
+	// Do nothing if monitor mode is on
+	if (MONITOR_ON(pAd))
+		return;
 
 	pEntry = &pAd->MacTab.Content[pBAEntry->Wcid];
 
@@ -1216,7 +1211,6 @@
 	NdisZeroMemory(&ADDframe, sizeof(FRAME_ADDBA_RSP));
 
 	// 2-1. Prepare ADDBA Response frame.
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		if (ADHOC_ON(pAd))
 			ActHeaderInit(pAd, &ADDframe.Hdr, pAddr, pAd->CurrentAddress, pAd->CommonCfg.Bssid);
@@ -1412,8 +1406,7 @@
 		return;
 	}
 
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		ActHeaderInit(pAd, &Frame.Hdr, pAd->CommonCfg.Bssid, pAd->CurrentAddress, pAd->MacTab.Content[Wcid].Addr);
+	ActHeaderInit(pAd, &Frame.Hdr, pAd->CommonCfg.Bssid, pAd->CurrentAddress, pAd->MacTab.Content[Wcid].Addr);
 
 	Frame.Category = CATEGORY_HT;
 	Frame.Action = SMPS_ACTION;
@@ -1478,8 +1471,7 @@
 	// 		a. pointer pRxBlk->pData to payload
 	//      b. modify pRxBlk->DataSize
 
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		RTMP_802_11_REMOVE_LLC_AND_CONVERT_TO_802_3(pRxBlk, Header802_3);
+	RTMP_802_11_REMOVE_LLC_AND_CONVERT_TO_802_3(pRxBlk, Header802_3);
 
 	ASSERT(pRxBlk->pRxPacket);
 	pRxPkt = RTPKT_TO_OSPKT(pRxBlk->pRxPacket);
@@ -1494,12 +1486,9 @@
 	//
 	if (!RX_BLK_TEST_FLAG(pRxBlk, fRX_AMSDU))
 	{
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		{
 #ifdef LINUX
-			NdisMoveMemory(skb_push(pRxPkt, LENGTH_802_3), Header802_3, LENGTH_802_3);
+		NdisMoveMemory(skb_push(pRxPkt, LENGTH_802_3), Header802_3, LENGTH_802_3);
 #endif
-		}
 	}
 }
 
diff --git a/drivers/staging/rt2860/common/cmm_data.c b/drivers/staging/rt2860/common/cmm_data.c
index 92f07ff..d857d06 100644
--- a/drivers/staging/rt2860/common/cmm_data.c
+++ b/drivers/staging/rt2860/common/cmm_data.c
@@ -339,12 +339,9 @@
 		return NDIS_STATUS_FAILURE;
 	}
 
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		// outgoing frame always wakeup PHY to prevent frame lost
-		if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
-			AsicForceWakeup(pAd, FROM_TX);
-	}
+	// outgoing frame always wakeup PHY to prevent frame lost
+	if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
+		AsicForceWakeup(pAd, FROM_TX);
 
 	pFirstTxWI	=(PTXWI_STRUC)pSrcBufVA;
 
@@ -501,12 +498,9 @@
 		return NDIS_STATUS_FAILURE;
 	}
 
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		// outgoing frame always wakeup PHY to prevent frame lost
-		if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
-			AsicForceWakeup(pAd, FROM_TX);
-	}
+	// outgoing frame always wakeup PHY to prevent frame lost
+	if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
+		AsicForceWakeup(pAd, FROM_TX);
 
 	pFirstTxWI = (PTXWI_STRUC)(pSrcBufVA +  TXINFO_SIZE);
 	pHeader_802_11 = (PHEADER_802_11) (pSrcBufVA + TXINFO_SIZE + TXWI_SIZE); //TXWI_SIZE);
@@ -530,7 +524,6 @@
 		pMacEntry = MacTableLookup(pAd, pHeader_802_11->Addr1);
 	}
 
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		// Fixed W52 with Activity scan issue in ABG_MIXED and ABGN_MIXED mode.
 		if (pAd->CommonCfg.PhyMode == PHY_11ABG_MIXED
@@ -829,13 +822,9 @@
 			TX_BLK_SET_FLAG(pTxBlk, fTX_bAckRequired);
 
 		{
-			IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-			{
-
-				// If support WMM, enable it.
-				if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED))
-					TX_BLK_SET_FLAG(pTxBlk, fTX_bWMM);
-			}
+			// If support WMM, enable it.
+			if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED))
+				TX_BLK_SET_FLAG(pTxBlk, fTX_bWMM);
 		}
 
 		if (pTxBlk->TxFrameType == TX_LEGACY_FRAME)
@@ -1107,9 +1096,8 @@
 
 			Count += pTxBlk->TxPacketList.Number;
 
-				// Do HardTransmit now.
-			IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-				Status = STAHardTransmit(pAd, pTxBlk, QueIdx);
+			// Do HardTransmit now.
+			Status = STAHardTransmit(pAd, pTxBlk, QueIdx);
 
 			DEQUEUE_UNLOCK(&pAd->irq_lock, bIntContext, IrqFlags);
 			// static rate also need NICUpdateFifoStaCounters() function.
@@ -2146,7 +2134,6 @@
 		   kfree(Elem);
 		}
 
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 	        	if (pRemovedLLCSNAP)
 	        	{
@@ -2159,8 +2146,7 @@
 		pClonePacket = ClonePacket(pAd, pPacket, pPayload, PayloadSize);
 		if (pClonePacket)
 		{
-			IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-				ANNOUNCE_OR_FORWARD_802_3_PACKET(pAd, pClonePacket, RTMP_GET_PACKET_IF(pPacket));
+			ANNOUNCE_OR_FORWARD_802_3_PACKET(pAd, pClonePacket, RTMP_GET_PACKET_IF(pPacket));
 		}
 
 
@@ -2257,8 +2243,6 @@
 
 	FirstWcid = 1;
 
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-
 	if (pAd->StaCfg.BssType == BSS_INFRA)
 		FirstWcid = 2;
 
@@ -2283,7 +2267,6 @@
 				pEntry->PairwiseKey.CipherAlg = CIPHER_NONE;
 			}
 			{
-				IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 				{
 					pEntry->ValidAsCLI = TRUE;
 					pEntry->ValidAsWDS = FALSE;
@@ -2311,7 +2294,6 @@
 				pEntry->apidx = apidx;
 
 			{
-				IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 				{
 					pEntry->AuthMode = pAd->StaCfg.AuthMode;
 					pEntry->WepStatus = pAd->StaCfg.WepStatus;
@@ -2796,8 +2778,7 @@
 	// 2. remove LLC
 	// 		a. pointer pRxBlk->pData to payload
 	//      b. modify pRxBlk->DataSize
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		RTMP_802_11_REMOVE_LLC_AND_CONVERT_TO_802_3(pRxBlk, Header802_3);
+	RTMP_802_11_REMOVE_LLC_AND_CONVERT_TO_802_3(pRxBlk, Header802_3);
 
 	if (pRxBlk->DataSize > MAX_RX_PKT_LEN)
 	{
@@ -2816,8 +2797,7 @@
 	//
 	// pass this 802.3 packet to upper layer or forward this packet to WM directly
 	//
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		ANNOUNCE_OR_FORWARD_802_3_PACKET(pAd, pRxPacket, FromWhichBSSID);
+	ANNOUNCE_OR_FORWARD_802_3_PACKET(pAd, pRxPacket, FromWhichBSSID);
 }
 
 
@@ -2876,8 +2856,7 @@
 	}
 
 	// get 802.3 Header and  remove LLC
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		RTMP_802_11_REMOVE_LLC_AND_CONVERT_TO_802_3(pRxBlk, Header802_3);
+	RTMP_802_11_REMOVE_LLC_AND_CONVERT_TO_802_3(pRxBlk, Header802_3);
 
 	ASSERT(pRxBlk->pRxPacket);
 
@@ -2888,8 +2867,7 @@
 
 	pData2 = pRxBlk->pData + Payload1Size + LENGTH_802_3;
 
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		pPacket2 = duplicate_pkt(pAd, (pData2-LENGTH_802_3), LENGTH_802_3, pData2, Payload2Size, FromWhichBSSID);
+	pPacket2 = duplicate_pkt(pAd, (pData2-LENGTH_802_3), LENGTH_802_3, pData2, Payload2Size, FromWhichBSSID);
 
 	if (!pPacket2)
 	{
@@ -2902,13 +2880,11 @@
 	pRxBlk->DataSize = Payload1Size;
 	wlan_802_11_to_802_3_packet(pAd, pRxBlk, Header802_3, FromWhichBSSID);
 
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		ANNOUNCE_OR_FORWARD_802_3_PACKET(pAd, pRxBlk->pRxPacket, FromWhichBSSID);
+	ANNOUNCE_OR_FORWARD_802_3_PACKET(pAd, pRxBlk->pRxPacket, FromWhichBSSID);
 
 	if (pPacket2)
 	{
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-			ANNOUNCE_OR_FORWARD_802_3_PACKET(pAd, pPacket2, FromWhichBSSID);
+		ANNOUNCE_OR_FORWARD_802_3_PACKET(pAd, pPacket2, FromWhichBSSID);
 	}
 }
 
@@ -3051,7 +3027,6 @@
 {
 	MAC_TABLE_ENTRY *pEntry = NULL;
 
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		pEntry = &pAd->MacTab.Content[BSSID_WCID];
 		STARxEAPOLFrameIndicate(pAd, pEntry, pRxBlk, FromWhichBSSID);
diff --git a/drivers/staging/rt2860/common/cmm_data_2860.c b/drivers/staging/rt2860/common/cmm_data_2860.c
index b9e8795..fb17355 100644
--- a/drivers/staging/rt2860/common/cmm_data_2860.c
+++ b/drivers/staging/rt2860/common/cmm_data_2860.c
@@ -1105,7 +1105,6 @@
 	// Set LED
 	RTMPSetLED(pAd, LED_RADIO_OFF);
 
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
     {
     	BOOLEAN		Cancelled;
 
diff --git a/drivers/staging/rt2860/common/cmm_info.c b/drivers/staging/rt2860/common/cmm_info.c
index dc91916..a172f37 100644
--- a/drivers/staging/rt2860/common/cmm_info.c
+++ b/drivers/staging/rt2860/common/cmm_info.c
@@ -225,8 +225,7 @@
 	IN	PRTMP_ADAPTER	pAd,
 	IN	PUCHAR			arg)
 {
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		DBGPRINT(RT_DEBUG_TRACE, ("Driver version-%s\n", STA_DRIVER_VERSION));
+	DBGPRINT(RT_DEBUG_TRACE, ("Driver version-%s\n", STA_DRIVER_VERSION));
 
     return TRUE;
 }
@@ -336,7 +335,6 @@
 
 	WirelessMode = simple_strtol(arg, 0, 10);
 
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		INT MaxPhyMode = PHY_11G;
 
@@ -405,7 +403,6 @@
 	// check if this channel is valid
 	if (ChannelSanity(pAd, Channel) == TRUE)
 	{
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 			pAd->CommonCfg.Channel = Channel;
 
@@ -433,8 +430,7 @@
 	}
 	else
 	{
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-			success = FALSE;
+		success = FALSE;
 	}
 
 
@@ -490,7 +486,6 @@
 	TxPower = (ULONG) simple_strtol(arg, 0, 10);
 	if (TxPower <= 100)
 	{
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 			pAd->CommonCfg.TxPowerDefault = TxPower;
 			pAd->CommonCfg.TxPowerPercentage = pAd->CommonCfg.TxPowerDefault;
@@ -560,8 +555,7 @@
 		case Rt802_11PreambleShort:
 			pAd->CommonCfg.TxPreamble = Preamble;
 
-			IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-				MlmeSetTxPreamble(pAd, Rt802_11PreambleShort);
+			MlmeSetTxPreamble(pAd, Rt802_11PreambleShort);
 			break;
 		case Rt802_11PreambleLong:
 		case Rt802_11PreambleAuto:
@@ -569,8 +563,7 @@
 			// capability upon association.
 			pAd->CommonCfg.TxPreamble = Preamble;
 
-			IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-				MlmeSetTxPreamble(pAd, Rt802_11PreambleLong);
+			MlmeSetTxPreamble(pAd, Rt802_11PreambleLong);
 			break;
 		default: //Invalid argument
 			return FALSE;
@@ -641,7 +634,6 @@
 		pAd->CommonCfg.FragmentThreshold = (USHORT)FragThresh;
 	}
 
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		if (pAd->CommonCfg.FragmentThreshold == MAX_FRAG_THRESHOLD)
 			pAd->CommonCfg.bUseZeroToDisableFragment = TRUE;
@@ -1173,8 +1165,7 @@
 
 	if (i == pAd->ChannelListNum)
 	{
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-			pAd->CommonCfg.Channel = FirstChannel(pAd);
+		pAd->CommonCfg.Channel = FirstChannel(pAd);
 		DBGPRINT(RT_DEBUG_ERROR, ("RTMPSetPhyMode: channel is out of range, use first channel=%d \n", pAd->CommonCfg.Channel));
 	}
 
@@ -1479,10 +1470,7 @@
 	}
 	AsicSetEdcaParm(pAd, &pAd->CommonCfg.APEdcaParm);
 
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		RTMPSetIndividualHT(pAd, 0);
-	}
+	RTMPSetIndividualHT(pAd, 0);
 }
 
 /*
@@ -1507,7 +1495,6 @@
 
 	do
 	{
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 			pDesired_ht_phy = &pAd->StaCfg.DesiredHtPhyInfo;
 			DesiredMcs = pAd->StaCfg.DesiredTransmitSetting.field.MCS;
@@ -1664,7 +1651,6 @@
 	USHORT		Wcid = 0;
 
 	{
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 			if (BssIdx > BSS0)
 			{
@@ -1689,7 +1675,6 @@
 	// Update WCID attribute table
 	offset = MAC_WCID_ATTRIBUTE_BASE + (Wcid * HW_WCID_ATTRI_SIZE);
 
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		if (pEntry && pEntry->ValidAsMesh)
 			WCIDAttri = (CipherAlg<<1) | PAIRWISEKEYTABLE;
@@ -2199,7 +2184,6 @@
 	else
 		HtMcs = MCS_AUTO;
 
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		pAd->StaCfg.DesiredTransmitSetting.field.MCS = HtMcs;
 		pAd->StaCfg.bAutoTxRateSwitch = (HtMcs == MCS_AUTO) ? TRUE:FALSE;
@@ -2703,8 +2687,7 @@
         fix_tx_mode = FIXED_TXMODE_CCK;
 	}
 
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		pAd->StaCfg.DesiredTransmitSetting.field.FixedTxMode = fix_tx_mode;
+	pAd->StaCfg.DesiredTransmitSetting.field.FixedTxMode = fix_tx_mode;
 
 	DBGPRINT(RT_DEBUG_TRACE, ("Set_FixedTxMode_Proc::(FixedTxMode=%d)\n", fix_tx_mode));
 
@@ -2789,8 +2772,7 @@
 	IN	PRTMP_ADAPTER	pAd,
 	OUT	PUCHAR			pBuf)
 {
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		sprintf(pBuf, "\t%s", pAd->CommonCfg.Ssid);
+	sprintf(pBuf, "\t%s", pAd->CommonCfg.Ssid);
 	return 0;
 }
 
@@ -2948,8 +2930,7 @@
 	IN	PRTMP_ADAPTER	pAd,
 	OUT	PUCHAR			pBuf)
 {
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		sprintf(pBuf, "\t%u", pAd->StaCfg.DesiredTransmitSetting.field.MCS);
+	sprintf(pBuf, "\t%u", pAd->StaCfg.DesiredTransmitSetting.field.MCS);
 	return 0;
 }
 
@@ -3090,8 +3071,7 @@
 	IN	PRTMP_ADAPTER	pAd,
 	OUT	PUCHAR			pBuf)
 {
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		sprintf(pBuf, "\t%s", pAd->CommonCfg.bWmmCapable ? "TRUE":"FALSE");
+	sprintf(pBuf, "\t%s", pAd->CommonCfg.bWmmCapable ? "TRUE":"FALSE");
 
 	return 0;
 }
@@ -3136,8 +3116,7 @@
 {
 	NDIS_802_11_AUTHENTICATION_MODE	AuthMode = Ndis802_11AuthModeOpen;
 
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		AuthMode = pAd->StaCfg.AuthMode;
+	AuthMode = pAd->StaCfg.AuthMode;
 
 	if ((AuthMode >= Ndis802_11AuthModeOpen) &&
 		(AuthMode <= Ndis802_11AuthModeWPA1PSKWPA2PSK))
@@ -3154,8 +3133,7 @@
 {
 	NDIS_802_11_WEP_STATUS	WepStatus = Ndis802_11WEPDisabled;
 
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		WepStatus = pAd->StaCfg.WepStatus;
+	WepStatus = pAd->StaCfg.WepStatus;
 
 	if ((WepStatus >= Ndis802_11WEPEnabled) &&
 		(WepStatus <= Ndis802_11Encryption4KeyAbsent))
@@ -3172,8 +3150,7 @@
 {
 	UCHAR DefaultKeyId = 0;
 
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		DefaultKeyId = pAd->StaCfg.DefaultKeyId;
+	DefaultKeyId = pAd->StaCfg.DefaultKeyId;
 
 	sprintf(pBuf, "\t%d", DefaultKeyId);
 
@@ -3243,8 +3220,7 @@
 	INT 	idx;
 	UCHAR	PMK[32] = {0};
 
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		NdisMoveMemory(PMK, pAd->StaCfg.PMK, 32);
+	NdisMoveMemory(PMK, pAd->StaCfg.PMK, 32);
 
     sprintf(pBuf, "\tPMK = ");
     for (idx = 0; idx < 32; idx++)
diff --git a/drivers/staging/rt2860/common/cmm_sanity.c b/drivers/staging/rt2860/common/cmm_sanity.c
index e5bebd5..843e44e 100644
--- a/drivers/staging/rt2860/common/cmm_sanity.c
+++ b/drivers/staging/rt2860/common/cmm_sanity.c
@@ -422,7 +422,6 @@
 				*(USHORT *)(&pHtCapability->HtCapInfo) = cpu2le16(*(USHORT *)(&pHtCapability->HtCapInfo));
 				*(USHORT *)(&pHtCapability->ExtHtCapInfo) = cpu2le16(*(USHORT *)(&pHtCapability->ExtHtCapInfo));
 
-				IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 				{
 					*pPreNHtCapabilityLen = 0;	// Nnow we only support 26 bytes.
 
@@ -450,7 +449,6 @@
 				*(USHORT *)(&AddHtInfo->AddHtInfo2) = cpu2le16(*(USHORT *)(&AddHtInfo->AddHtInfo2));
 				*(USHORT *)(&AddHtInfo->AddHtInfo3) = cpu2le16(*(USHORT *)(&AddHtInfo->AddHtInfo3));
 
-				IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 				{
 			                Ptr = (PUCHAR) pVIE;
 			                NdisMoveMemory(Ptr + *LengthVIE, &pEid->Eid, pEid->Len + 2);
@@ -483,7 +481,6 @@
                 {
                     *pChannel = *pEid->Octet;
 
-					IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 					{
 						if (ChannelSanity(pAd, *pChannel) == 0)
 						{
@@ -707,7 +704,6 @@
     }
 
     // For some 11a AP. it did not have the channel EID, patch here
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		UCHAR LatchRfChannel = MsgChannel;
 		if ((pAd->LatchRfRegs.Channel > 14) && ((Sanity & 0x4) == 0))
diff --git a/drivers/staging/rt2860/common/cmm_sync.c b/drivers/staging/rt2860/common/cmm_sync.c
index cdbc8a34..360b3bc 100644
--- a/drivers/staging/rt2860/common/cmm_sync.c
+++ b/drivers/staging/rt2860/common/cmm_sync.c
@@ -383,11 +383,8 @@
 	PHEADER_802_11  pHdr80211;
 	UINT			ScanTimeIn5gChannel = SHORT_CHANNEL_TIME;
 
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		if (MONITOR_ON(pAd))
-			return;
-	}
+	if (MONITOR_ON(pAd))
+		return;
 
 	if (pAd->MlmeAux.Channel == 0)
 	{
@@ -411,7 +408,6 @@
 			DBGPRINT(RT_DEBUG_TRACE, ("SYNC - End of SCAN, restore to channel %d, Total BSS[%02d]\n",pAd->CommonCfg.Channel, pAd->ScanTab.BssNr));
 		}
 
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 			//
 			// To prevent data lost.
@@ -446,7 +442,6 @@
 	}
 	else
 	{
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 		// BBP and RF are not accessible in PS mode, we has to wake them up first
 		if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
@@ -460,7 +455,6 @@
 		AsicSwitchChannel(pAd, pAd->MlmeAux.Channel, TRUE);
 		AsicLockChannel(pAd, pAd->MlmeAux.Channel);
 
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 			if (pAd->MlmeAux.Channel > 14)
 			{
@@ -515,7 +509,6 @@
 			{
 				DBGPRINT(RT_DEBUG_TRACE, ("SYNC - ScanNextChannel() allocate memory fail\n"));
 
-				IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 				{
 					pAd->Mlme.SyncMachine.CurrState = SYNC_IDLE;
 					Status = MLME_FAIL_NO_RESOURCE;
@@ -590,8 +583,7 @@
 
 		// For SCAN_CISCO_PASSIVE, do nothing and silently wait for beacon or other probe reponse
 
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-			pAd->Mlme.SyncMachine.CurrState = SCAN_LISTEN;
+		pAd->Mlme.SyncMachine.CurrState = SCAN_LISTEN;
 	}
 }
 
diff --git a/drivers/staging/rt2860/common/cmm_wpa.c b/drivers/staging/rt2860/common/cmm_wpa.c
index 4074db2..e206077e 100644
--- a/drivers/staging/rt2860/common/cmm_wpa.c
+++ b/drivers/staging/rt2860/common/cmm_wpa.c
@@ -623,7 +623,6 @@
 	rsnielen_ex_cur_p = NULL;
 
 	{
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 			if (pAd->StaCfg.WpaSupplicantUP != WPA_SUPPLICANT_DISABLE)
 			{
diff --git a/drivers/staging/rt2860/common/mlme.c b/drivers/staging/rt2860/common/mlme.c
index 8133267..886dcbe 100644
--- a/drivers/staging/rt2860/common/mlme.c
+++ b/drivers/staging/rt2860/common/mlme.c
@@ -477,7 +477,6 @@
 		pAd->Mlme.bRunning = FALSE;
 		NdisAllocateSpinLock(&pAd->Mlme.TaskLock);
 
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 			BssTableInit(&pAd->ScanTab);
 
@@ -505,7 +504,6 @@
 		// software-based RX Antenna diversity
 		RTMPInitTimer(pAd, &pAd->Mlme.RxAntEvalTimer, GET_TIMER_FUNCTION(AsicRxAntEvalTimeout), pAd, FALSE);
 
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 	        if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE))
 	        {
@@ -647,7 +645,6 @@
 		AsicDisableSync(pAd);
 	}
 
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		// Cancel pending timers
 		RTMPCancelTimer(&pAd->MlmeAux.AssocTimer,		&Cancelled);
@@ -756,7 +753,6 @@
 		pAd->StaCfg.WpaSupplicantUP = 1;
 	}
 
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 	    // If Hardware controlled Radio enabled, we have to check GPIO pin2 every 2 second.
 		// Move code to here, because following code will return when radio is off
@@ -805,7 +801,6 @@
 								fRTMP_ADAPTER_RESET_IN_PROGRESS))))
 		return;
 
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		if ((pAd->RalinkCounters.LastReceivedByteCount == pAd->RalinkCounters.ReceivedByteCount) && (pAd->StaCfg.bRadio == TRUE))
 		{
@@ -846,7 +841,6 @@
 
 	RT28XX_MLME_PRE_SANITY_CHECK(pAd);
 
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		// Do nothing if monitor mode is on
 		if (MONITOR_ON(pAd))
@@ -881,7 +875,6 @@
 	if ((pAd->Mlme.PeriodicRound % 5 == 0) && RTMPAutoRateSwitchCheck(pAd)/*(OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED))*/)
 	{
 		// perform dynamic tx rate switching based on past TX history
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 			if ((OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED)
 					)
@@ -952,12 +945,10 @@
 			}
 		}
 
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-			STAMlmePeriodicExec(pAd);
+		STAMlmePeriodicExec(pAd);
 
 		MlmeResetRalinkCounters(pAd);
 
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 			if (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST) && (pAd->bPCIclkOff == FALSE))
 			{
@@ -1516,7 +1507,6 @@
 			break;
 		}
 
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 			//else if ((pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0) && (pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0))
 			if ((pEntry->HTCapability.MCSSet[0] == 0) && (pEntry->HTCapability.MCSSet[1] == 0))
@@ -2805,7 +2795,6 @@
 
 //===========================================================================
 //===========================================================================
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		pHtPhy 		= &pAd->StaCfg.HTPhyMode;
 		pMaxHtPhy	= &pAd->StaCfg.MaxHTPhyMode;
@@ -2934,8 +2923,7 @@
 	{
 		short dbm = 0;
 
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-			dbm = pAd->StaCfg.RssiSample.AvgRssi0 - pAd->BbpRssiToDbmDelta;
+		dbm = pAd->StaCfg.RssiSample.AvgRssi0 - pAd->BbpRssiToDbmDelta;
 
 		if (bLinkUp == TRUE)
 			pAd->CommonCfg.TxRate = RATE_24;
@@ -3088,7 +3076,6 @@
 
 	auto_rate_cur_p = NULL;
 
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		pDesireHtPhy	= &pAd->StaCfg.DesiredHtPhyInfo;
 		pActiveHtPhy	= &pAd->StaCfg.DesiredHtPhyInfo;
@@ -3562,7 +3549,6 @@
 	else
 		pBss->QbssLoad.bValid = FALSE;
 
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		PEID_STRUCT     pEid;
 		USHORT          Length = 0;
@@ -4357,8 +4343,7 @@
 	pHdr80211->FC.ToDs = ToDs;
 	COPY_MAC_ADDR(pHdr80211->Addr1, pDA);
 
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		COPY_MAC_ADDR(pHdr80211->Addr2, pAd->CurrentAddress);
+	COPY_MAC_ADDR(pHdr80211->Addr2, pAd->CurrentAddress);
 
 	COPY_MAC_ADDR(pHdr80211->Addr3, pBssid);
 }
@@ -4566,7 +4551,6 @@
 		return FALSE;
 	}
 
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		if (!MsgTypeSubst(pAd, pFrame, &Machine, &MsgType))
 		{
@@ -4674,7 +4658,6 @@
 		}
 	}
 
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		// Cancel all timer events
 		// Be careful to cancel new added timer
@@ -4693,7 +4676,6 @@
 	// Resume MSDU which is turned off durning scan
 	RTMPResumeMsduTransmission(pAd);
 
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		// Set all state machines back IDLE
 		pAd->Mlme.CntlMachine.CurrState    = CNTL_IDLE;
@@ -6223,7 +6205,6 @@
 
 	RTMP_IO_READ32(pAd, BCN_TIME_CFG, &csr.word);
 
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		csr.field.BeaconInterval = pAd->CommonCfg.BeaconPeriod << 4; // ASIC register in units of 1/16 TU
 		csr.field.bTsfTicking = 1;
@@ -6427,7 +6408,6 @@
 		Ac2Cfg.field.Cwmax = pEdcaParm->Cwmax[QID_AC_VI];
 		Ac2Cfg.field.Aifsn = pEdcaParm->Aifsn[QID_AC_VI];
 
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 			// Tuning for Wi-Fi WMM S06
 			if (pAd->CommonCfg.bWiFiTest &&
@@ -6485,8 +6465,7 @@
 		CwminCsr.field.Cwmin1 = pEdcaParm->Cwmin[QID_AC_BK];
 		CwminCsr.field.Cwmin2 = pEdcaParm->Cwmin[QID_AC_VI];
 
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-			CwminCsr.field.Cwmin3 = pEdcaParm->Cwmin[QID_AC_VO] - 1; //for TGn wifi test
+		CwminCsr.field.Cwmin3 = pEdcaParm->Cwmin[QID_AC_VO] - 1; //for TGn wifi test
 
 		RTMP_IO_WRITE32(pAd, WMM_CWMIN_CFG, CwminCsr.word);
 
@@ -6502,7 +6481,6 @@
 		AifsnCsr.field.Aifsn1 = Ac1Cfg.field.Aifsn; //pEdcaParm->Aifsn[QID_AC_BK];
 		AifsnCsr.field.Aifsn2 = Ac2Cfg.field.Aifsn; //pEdcaParm->Aifsn[QID_AC_VI];
 
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 			// Tuning for Wi-Fi WMM S06
 			if (pAd->CommonCfg.bWiFiTest &&
@@ -6519,8 +6497,7 @@
 			}
 		}
 
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-			AifsnCsr.field.Aifsn3 = Ac3Cfg.field.Aifsn - 1; //pEdcaParm->Aifsn[QID_AC_VO]; //for TGn wifi test
+		AifsnCsr.field.Aifsn3 = Ac3Cfg.field.Aifsn - 1; //pEdcaParm->Aifsn[QID_AC_VO]; //for TGn wifi test
 
 		RTMP_IO_WRITE32(pAd, WMM_AIFSN_CFG, AifsnCsr.word);
 
@@ -6582,7 +6559,6 @@
 
 	SlotTime = (bUseShortSlotTime)? 9 : 20;
 
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		// force using short SLOT time for FAE to demo performance when TxBurst is ON
 		if (((pAd->StaActive.SupportedPhyInfo.bHtEnable == FALSE) && (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED)))
@@ -6601,11 +6577,8 @@
 	//
 	// ToDo: Should consider capability with 11B
 	//
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		if (pAd->StaCfg.BssType == BSS_ADHOC)
-			SlotTime = 20;
-	}
+	if (pAd->StaCfg.BssType == BSS_ADHOC)
+		SlotTime = 20;
 
 	RTMP_IO_READ32(pAd, BKOFF_SLOT_CFG, &RegValue);
 	RegValue = RegValue & 0xFFFFFF00;
@@ -7551,7 +7524,6 @@
 {
 	UCHAR	BBPR3 = 0;
 
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS	|
 								fRTMP_ADAPTER_HALT_IN_PROGRESS	|
@@ -7580,7 +7552,6 @@
 	}
 	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BBPR3);
 
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
     	pAd->StaCfg.BBPR3 = BBPR3;
 
 	if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED)
@@ -7626,7 +7597,6 @@
 	UCHAR			BBPR3 = 0;
 	CHAR			larger = -127, rssi0, rssi1, rssi2;
 
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS)	||
 			RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS)		||
@@ -7752,7 +7722,6 @@
 {
 	BOOLEAN		result = TRUE;
 
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		// only associated STA counts
 		if (pEntry && (pEntry->ValidAsCLI) && (pEntry->Sst == SST_ASSOC))
@@ -7770,11 +7739,8 @@
 BOOLEAN RTMPAutoRateSwitchCheck(
 	IN PRTMP_ADAPTER    pAd)
 {
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		if (pAd->StaCfg.bAutoTxRateSwitch)
-			return TRUE;
-	}
+	if (pAd->StaCfg.bAutoTxRateSwitch)
+		return TRUE;
 
 	return FALSE;
 }
@@ -7801,10 +7767,7 @@
 {
 	UCHAR	tx_mode = FIXED_TXMODE_HT;
 
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		tx_mode = (UCHAR)pAd->StaCfg.DesiredTransmitSetting.field.FixedTxMode;
-	}
+	tx_mode = (UCHAR)pAd->StaCfg.DesiredTransmitSetting.field.FixedTxMode;
 
 	return tx_mode;
 }
diff --git a/drivers/staging/rt2860/common/rtmp_init.c b/drivers/staging/rt2860/common/rtmp_init.c
index 4d2b9db..611c88c9 100644
--- a/drivers/staging/rt2860/common/rtmp_init.c
+++ b/drivers/staging/rt2860/common/rtmp_init.c
@@ -1272,7 +1272,6 @@
 
 	NicConfig2.word = pAd->EEPROMDefaultValue[1];
 
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		NicConfig2.word = 0;
 		if ((NicConfig2.word & 0x00ff) == 0xff)
@@ -1538,7 +1537,6 @@
     pAd->LedIndicatorStregth = 0xFF;
     RTMPSetSignalLED(pAd, -100);	// Force signal strength Led to be turned off, before link up
 
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		// Read Hardware controlled Radio state enable bit
 		if (NicConfig2.field.HardwareRadioControl == 1)
@@ -1602,7 +1600,6 @@
 	}
 	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BBPR3);
 
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		// Handle the difference when 1T
 		RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R1, &BBPR1);
@@ -1862,7 +1859,6 @@
 	}
 
 
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		for (Index = 0; Index < NUM_STA_MAC_REG_PARMS; Index++)
 		{
@@ -1932,7 +1928,6 @@
 
 
 	// Add radio off control
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		if (pAd->StaCfg.bRadio == FALSE)
 		{
@@ -1979,7 +1974,6 @@
 		}
 	}
 
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		// for rt2860E and after, init TXOP_CTRL_CFG with 0x583f. This is for extension channel overlapping IOT.
 		if ((pAd->MACVersion&0xffff) != 0x0101)
@@ -2972,7 +2966,6 @@
 	//
 	// part II. intialize STA specific configuration
 	//
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		RX_FILTER_SET_FLAG(pAd, fRX_FILTER_ACCEPT_DIRECT);
 		RX_FILTER_CLEAR_FLAG(pAd, fRX_FILTER_ACCEPT_MULTICAST);
@@ -3020,7 +3013,6 @@
 	pAd->CommonCfg.PhyMode = PHY_11BG_MIXED;		// default PHY mode
 	OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_SHORT_PREAMBLE_INUSED);  // CCK use LONG preamble
 
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		// user desired power mode
 		pAd->StaCfg.WindowsPowerMode = Ndis802_11PowerModeCAM;
diff --git a/drivers/staging/rt2860/mlme.h b/drivers/staging/rt2860/mlme.h
index cfd1960..3d1a8284 100644
--- a/drivers/staging/rt2860/mlme.h
+++ b/drivers/staging/rt2860/mlme.h
@@ -73,10 +73,7 @@
 #define MAX_CHANNEL_TIME            140       // unit: msec, for single band scan
 #define	FAST_ACTIVE_SCAN_TIME	    30 		  // Active scan waiting for probe response time
 #define CW_MIN_IN_BITS              4         // actual CwMin = 2^CW_MIN_IN_BITS - 1
-
-#ifndef CONFIG_AP_SUPPORT
 #define CW_MAX_IN_BITS              10        // actual CwMax = 2^CW_MAX_IN_BITS - 1
-#endif
 
 // Note: RSSI_TO_DBM_OFFSET has been changed to variable for new RF (2004-0720).
 // SHould not refer to this constant anymore
diff --git a/drivers/staging/rt2860/rt_linux.c b/drivers/staging/rt2860/rt_linux.c
index a8c637a..d74c593 100644
--- a/drivers/staging/rt2860/rt_linux.c
+++ b/drivers/staging/rt2860/rt_linux.c
@@ -486,10 +486,7 @@
 {
     PNET_DEV dev_p = NULL;
 
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		dev_p = pAd->net_dev;
-	}
+	dev_p = pAd->net_dev;
 
 	ASSERT(dev_p);
 	return dev_p; /* return one of MBSS */
@@ -645,11 +642,8 @@
 	//
 	//
 
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		NdisMoveMemory(skb_push(pOSPkt, LENGTH_802_3), pHeader802_3, LENGTH_802_3);
-	}
-
-
+	NdisMoveMemory(skb_push(pOSPkt, LENGTH_802_3), pHeader802_3, LENGTH_802_3);
+}
 
 void announce_802_3_packet(
 	IN	PRTMP_ADAPTER	pAd,
diff --git a/drivers/staging/rt2860/rt_main_dev.c b/drivers/staging/rt2860/rt_main_dev.c
index 7a09b75..138b136 100644
--- a/drivers/staging/rt2860/rt_main_dev.c
+++ b/drivers/staging/rt2860/rt_main_dev.c
@@ -195,7 +195,6 @@
 	if (pAd == NULL)
 		return 0; // close ok
 
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		// If dirver doesn't wake up firmware here,
 		// NICLoadFirmware will hang forever when interface is up again.
@@ -260,11 +259,7 @@
 	// Close kernel threads or tasklets
 	kill_thread_task(pAd);
 
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		MacTableReset(pAd);
-	}
-
+	MacTableReset(pAd);
 
 	MeasureReqTabExit(pAd);
 	TpcReqTabExit(pAd);
@@ -377,8 +372,7 @@
 
 	CfgInitHook(pAd);
 
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		NdisAllocateSpinLock(&pAd->MacTabLock);
+	NdisAllocateSpinLock(&pAd->MacTabLock);
 
 	MeasureReqTabInit(pAd);
 	TpcReqTabInit(pAd);
@@ -547,11 +541,8 @@
 	if (rt28xx_init(net_dev) == FALSE)
 		goto err;
 
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		NdisZeroMemory(pAd->StaCfg.dev_name, 16);
-		NdisMoveMemory(pAd->StaCfg.dev_name, net_dev->name, strlen(net_dev->name));
-	}
+	NdisZeroMemory(pAd->StaCfg.dev_name, 16);
+	NdisMoveMemory(pAd->StaCfg.dev_name, net_dev->name, strlen(net_dev->name));
 
 	// Set up the Mac address
 	NdisMoveMemory(net_dev->dev_addr, (void *) pAd->CurrentAddress, 6);
@@ -561,10 +552,6 @@
 
 	// Various AP function init
 
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-	}
-
 	// Enable Interrupt
 	RT28XX_IRQ_ENABLE(pAd);
 
@@ -578,7 +565,6 @@
 	printk("0x1300 = %08x\n", reg);
 	}
 
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
         RTMPInitPCIeLinkCtrlValue(pAd);
 
 	return (retval);
@@ -776,7 +762,6 @@
 	int status = 0;
 	PNDIS_PACKET pPacket = (PNDIS_PACKET) skb;
 
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		// Drop send request since we are in monitor mode
 		if (MONITOR_ON(pAd))
@@ -802,11 +787,7 @@
     }
 #endif
 
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-
-		STASendPackets((NDIS_HANDLE)pAd, (PPNDIS_PACKET) &pPacket, 1);
-	}
+	STASendPackets((NDIS_HANDLE)pAd, (PPNDIS_PACKET) &pPacket, 1);
 
 	status = 0;
 done:
@@ -928,10 +909,7 @@
 		return -ENETDOWN;
 	}
 
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-	{
-		ret = rt28xx_sta_ioctl(net_dev, rq, cmd);
-	}
+	ret = rt28xx_sta_ioctl(net_dev, rq, cmd);
 
 	return ret;
 }
diff --git a/drivers/staging/rt2860/rt_profile.c b/drivers/staging/rt2860/rt_profile.c
index d89a1c7..48ec808 100644
--- a/drivers/staging/rt2860/rt_profile.c
+++ b/drivers/staging/rt2860/rt_profile.c
@@ -754,7 +754,6 @@
 	//DefaultKeyID
 	if(RTMPGetKeyParameter("DefaultKeyID", tmpbuf, 25, buffer))
 	{
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 			KeyIdx = simple_strtol(tmpbuf, 0, 10);
 			if((KeyIdx >= 1 ) && (KeyIdx <= 4))
@@ -778,7 +777,6 @@
 			    KeyType[i] = simple_strtol(macptr, 0, 10);
 		    }
 
-			IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 			{
 				sprintf(tok_str, "Key%dStr", idx + 1);
 				if (RTMPGetCriticalParameter(tok_str, tmpbuf, 128, buffer))
@@ -884,8 +882,7 @@
         return NDIS_STATUS_FAILURE;
 	}
 
-	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-		src = STA_PROFILE_PATH;
+	src = STA_PROFILE_PATH;
 
 	// Save uid and gid used for filesystem access.
 	// Set user and group to 0 (root)
@@ -959,7 +956,6 @@
 						pAd->CommonCfg.CountryCode[2] = ' ';
 					}
 
-					IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 					{
 						//SSID
 						if (RTMPGetCriticalParameter("SSID", tmpbuf, 256, buffer))
@@ -980,7 +976,6 @@
 						}
 					}
 
-					IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 					{
 						//NetworkType
 						if (RTMPGetKeyParameter("NetworkType", tmpbuf, 25, buffer))
@@ -1034,8 +1029,7 @@
 					{
 						pAd->CommonCfg.TxPowerPercentage = (ULONG) simple_strtol(tmpbuf, 0, 10);
 
-						IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-							pAd->CommonCfg.TxPowerDefault = pAd->CommonCfg.TxPowerPercentage;
+						pAd->CommonCfg.TxPowerDefault = pAd->CommonCfg.TxPowerPercentage;
 
 						DBGPRINT(RT_DEBUG_TRACE, ("TxPower=%ld\n", pAd->CommonCfg.TxPowerPercentage));
 					}
@@ -1153,8 +1147,7 @@
 #endif // AGGREGATION_SUPPORT //
 
 					// WmmCapable
-					IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
-						rtmp_read_sta_wmm_parms_from_file(pAd, tmpbuf, buffer);
+					rtmp_read_sta_wmm_parms_from_file(pAd, tmpbuf, buffer);
 
 					//ShortSlot
 					if(RTMPGetKeyParameter("ShortSlot", tmpbuf, 10, buffer))
@@ -1257,7 +1250,6 @@
 					//AuthMode
 					if(RTMPGetKeyParameter("AuthMode", tmpbuf, 128, buffer))
 					{
-						IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 						{
 							if ((strcmp(tmpbuf, "WEPAUTO") == 0) || (strcmp(tmpbuf, "wepauto") == 0))
 							    pAd->StaCfg.AuthMode = Ndis802_11AuthModeAutoSwitch;
@@ -1284,7 +1276,6 @@
 					//EncrypType
 					if(RTMPGetKeyParameter("EncrypType", tmpbuf, 128, buffer))
 					{
-						IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 						{
 							if ((strcmp(tmpbuf, "WEP") == 0) || (strcmp(tmpbuf, "wep") == 0))
 								pAd->StaCfg.WepStatus	= Ndis802_11WEPEnabled;
@@ -1305,7 +1296,6 @@
 						}
 					}
 
-					IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 					{
 						if(RTMPGetCriticalParameter("WPAPSK", tmpbuf, 512, buffer))
 						{
@@ -1360,7 +1350,6 @@
 
 					HTParametersHook(pAd, tmpbuf, buffer);
 
-					IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 					{
 						//PSMode
 						if (RTMPGetKeyParameter("PSMode", tmpbuf, 32, buffer))
@@ -1713,7 +1702,6 @@
 	{
 		UCHAR	fix_tx_mode;
 
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 			fix_tx_mode = FIXED_TXMODE_HT;
 
@@ -1789,7 +1777,6 @@
 	// MSC
 	if (RTMPGetKeyParameter("HT_MCS", pValueStr, 50, pInput))
 	{
-		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 			Value = simple_strtol(pValueStr, 0, 10);
 
diff --git a/drivers/staging/rt2860/rtmp.h b/drivers/staging/rt2860/rtmp.h
index 51e58db..9d10185 100644
--- a/drivers/staging/rt2860/rtmp.h
+++ b/drivers/staging/rt2860/rtmp.h
@@ -47,14 +47,6 @@
 
 //#define DBG_DIAGNOSE		1
 
-#if defined(CONFIG_AP_SUPPORT)
-#define IF_DEV_CONFIG_OPMODE_ON_AP(_pAd)	if(_pAd->OpMode == OPMODE_AP)
-#define IF_DEV_CONFIG_OPMODE_ON_STA(_pAd)	if(_pAd->OpMode == OPMODE_STA)
-#else
-#define IF_DEV_CONFIG_OPMODE_ON_AP(_pAd)
-#define IF_DEV_CONFIG_OPMODE_ON_STA(_pAd)
-#endif
-
 #define VIRTUAL_IF_INC(__pAd) ((__pAd)->VirtualIfCnt++)
 #define VIRTUAL_IF_DEC(__pAd) ((__pAd)->VirtualIfCnt--)
 #define VIRTUAL_IF_NUM(__pAd) ((__pAd)->VirtualIfCnt)
diff --git a/drivers/staging/rt2860/rtmp_def.h b/drivers/staging/rt2860/rtmp_def.h
index 5abe8d7..7ba584c 100644
--- a/drivers/staging/rt2860/rtmp_def.h
+++ b/drivers/staging/rt2860/rtmp_def.h
@@ -1364,9 +1364,7 @@
 #define MAX_RX_REORDERBUF		64
 #define DEFAULT_TX_TIMEOUT		30
 #define DEFAULT_RX_TIMEOUT		30
-#ifndef CONFIG_AP_SUPPORT
 #define MAX_BARECI_SESSION		8
-#endif
 
 #ifndef IW_ESSID_MAX_SIZE
 /* Maximum size of the ESSID and pAd->nickname strings */
diff --git a/drivers/staging/rt2860/sta_ioctl.c b/drivers/staging/rt2860/sta_ioctl.c
index a2644a9..73a83d4 100644
--- a/drivers/staging/rt2860/sta_ioctl.c
+++ b/drivers/staging/rt2860/sta_ioctl.c
@@ -3007,11 +3007,7 @@
 static const iw_handler rt_priv_handlers[] = {
 	(iw_handler) NULL, /* + 0x00 */
 	(iw_handler) NULL, /* + 0x01 */
-#ifndef CONFIG_AP_SUPPORT
 	(iw_handler) rt_ioctl_setparam, /* + 0x02 */
-#else
-	(iw_handler) NULL, /* + 0x02 */
-#endif // CONFIG_AP_SUPPORT //
 #ifdef DBG
 	(iw_handler) rt_private_ioctl_bbp, /* + 0x03 */
 #else