clk: sunxi: Add USB clock register defintions
Add register definitions for the usb-clk register found on sun4i, sun5i and
sun7i SoCs.
Signed-off-by: Roman Byshko <rbyshko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Emilio López <emilio@elopez.com.ar>
diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt
index 0cf679b..ca2b692 100644
--- a/Documentation/devicetree/bindings/clock/sunxi.txt
+++ b/Documentation/devicetree/bindings/clock/sunxi.txt
@@ -37,6 +37,8 @@
"allwinner,sun6i-a31-apb2-gates-clk" - for the APB2 gates on A31
"allwinner,sun4i-mod0-clk" - for the module 0 family of clocks
"allwinner,sun7i-a20-out-clk" - for the external output clocks
+ "allwinner,sun4i-a10-usb-clk" - for usb gates + resets on A10 / A20
+ "allwinner,sun5i-a13-usb-clk" - for usb gates + resets on A13
Required properties for all clocks:
- reg : shall be the control register address for the clock.
@@ -50,6 +52,9 @@
If the clock module only has one output, the name shall be the
module name.
+And "allwinner,*-usb-clk" clocks also require:
+- reset-cells : shall be set to 1
+
Clock consumers should specify the desired clocks they use with a
"clocks" phandle cell. Consumers that are using a gated clock should
provide an additional ID in their clock property. This ID is the
diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c
index 23beb6e..a779c31 100644
--- a/drivers/clk/sunxi/clk-sunxi.c
+++ b/drivers/clk/sunxi/clk-sunxi.c
@@ -816,6 +816,16 @@
.mask = { 0xff80ff },
};
+static const struct gates_data sun4i_a10_usb_gates_data __initconst = {
+ .mask = {0x1C0},
+ .reset_mask = 0x07,
+};
+
+static const struct gates_data sun5i_a13_usb_gates_data __initconst = {
+ .mask = {0x140},
+ .reset_mask = 0x03,
+};
+
static void __init sunxi_gates_clk_setup(struct device_node *node,
struct gates_data *data)
{
@@ -1107,6 +1117,8 @@
{.compatible = "allwinner,sun6i-a31-apb1-gates-clk", .data = &sun6i_a31_apb1_gates_data,},
{.compatible = "allwinner,sun7i-a20-apb1-gates-clk", .data = &sun7i_a20_apb1_gates_data,},
{.compatible = "allwinner,sun6i-a31-apb2-gates-clk", .data = &sun6i_a31_apb2_gates_data,},
+ {.compatible = "allwinner,sun4i-a10-usb-clk", .data = &sun4i_a10_usb_gates_data,},
+ {.compatible = "allwinner,sun5i-a13-usb-clk", .data = &sun5i_a13_usb_gates_data,},
{}
};
