sh: Urquell board support.
This adds preliminary support for the SH7786-based Urquell board.
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
diff --git a/arch/sh/include/mach-common/mach/urquell.h b/arch/sh/include/mach-common/mach/urquell.h
new file mode 100644
index 0000000..14b3e1d
--- /dev/null
+++ b/arch/sh/include/mach-common/mach/urquell.h
@@ -0,0 +1,68 @@
+#ifndef __MACH_URQUELL_H
+#define __MACH_URQUELL_H
+
+/*
+ * ------ 0x00000000 ------------------------------------
+ * CS0 | (SW1,SW47) EEPROM, SRAM, NOR FLASH
+ * -----+ 0x04000000 ------------------------------------
+ * CS1 | (SW47) SRAM, SRAM-LAN-PCMCIA, NOR FLASH
+ * -----+ 0x08000000 ------------------------------------
+ * CS2 | DDR3
+ * CS3 |
+ * -----+ 0x10000000 ------------------------------------
+ * CS4 | PCIe
+ * -----+ 0x14000000 ------------------------------------
+ * CS5 | (SW47) LRAM/URAM, SRAM-LAN-PCMCIA
+ * -----+ 0x18000000 ------------------------------------
+ * CS6 | ATA, NAND FLASH
+ * -----+ 0x1c000000 ------------------------------------
+ * CS7 | SH7786 register
+ * -----+------------------------------------------------
+ */
+
+#define NOR_FLASH_ADDR 0x00000000
+#define NOR_FLASH_SIZE 0x04000000
+
+#define CS1_BASE 0x05000000
+#define CS5_BASE 0x15000000
+#define FPGA_BASE CS1_BASE
+
+#define BOARDREG(ofs) (FPGA_BASE + ofs##_OFS)
+#define UBOARDREG(ofs) (0xa0000000 + FPGA_BASE + ofs##_OFS)
+
+#define SRSTR_OFS 0x0000 /* System reset register */
+#define BDMR_OFS 0x0010 /* Board operating mode resister */
+#define IRL0SR_OFS 0x0020 /* IRL0 Status register */
+#define IRL0MSKR_OFS 0x0030 /* IRL0 Mask register */
+#define IRL1SR_OFS 0x0040 /* IRL1 Status register */
+#define IRL1MSKR_OFS 0x0050 /* IRL1 Mask register */
+#define IRL2SR_OFS 0x0060 /* IRL2 Status register */
+#define IRL2MSKR_OFS 0x0070 /* IRL2 Mask register */
+#define IRL3SR_OFS 0x0080 /* IRL3 Status register */
+#define IRL3MSKR_OFS 0x0090 /* IRL3 Mask register */
+#define SOFTINTR_OFS 0x0120 /* Softwear Interrupt register */
+#define SLEDR_OFS 0x0130 /* LED control resister */
+#define MAPSCIFSWR_OFS 0x0140 /* Map/SCIF Switch register */
+#define FPVERR_OFS 0x0150 /* FPGA Version register */
+#define FPDATER_OFS 0x0160 /* FPGA Date register */
+#define FPYEARR_OFS 0x0170 /* FPGA Year register */
+#define TCLKCR_OFS 0x0180 /* TCLK Control register */
+#define DIPSWMR_OFS 0x1000 /* DIPSW monitor register */
+#define FPODR_OFS 0x1010 /* Output port data register */
+#define ATACNR_OFS 0x1020 /* ATA-CN Control/status register */
+#define FPINDR_OFS 0x1030 /* Input port data register */
+#define MDSWMR_OFS 0x1040 /* MODE SW monitor register */
+#define DDR3BUPCR_OFS 0x1050 /* DDR3 Backup control register */
+#define SSICODECCR_OFS 0x1060 /* SSI-CODEC control register */
+#define PCIESLOTSR_OFS 0x1070 /* PCIexpress Slot status register */
+#define ETHERPORTSR_OFS 0x1080 /* EtherPhy Port status register */
+#define LATCHCR_OFS 0x3000 /* Latch control register */
+#define LATCUAR_OFS 0x3010 /* Latch upper address register */
+#define LATCLAR_OFS 0x3012 /* Latch lower address register */
+#define LATCLUDR_OFS 0x3024 /* Latch D31-16 register */
+#define LATCLLDR_OFS 0x3026 /* Latch D15-0 register */
+
+#define CHARLED_OFS 0x2000 /* Character LED */
+
+#endif /* __MACH_URQUELL_H */
+
