hwmon: (it87) Use request_muxed_region
Serialize access to the hardware by using "request_muxed_region" macro
defined by Alan Cox. Call to this macro will hold off the requestor if
the resource is currently busy. "superio_enter" will return an error
if call to "request_muxed_region" fails. Rest of the code change is to
ripple an error return from superio_enter to the top level.
Signed-off-by: Nat Gurumoorthy <natg@google.com>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index 316b648..bb6405b 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -77,15 +77,13 @@
#define DEVID 0x20 /* Register: Device ID */
#define DEVREV 0x22 /* Register: Device Revision */
-static inline int
-superio_inb(int reg)
+static inline int superio_inb(int reg)
{
outb(reg, REG);
return inb(VAL);
}
-static inline void
-superio_outb(int reg, int val)
+static inline void superio_outb(int reg, int val)
{
outb(reg, REG);
outb(val, VAL);
@@ -101,27 +99,32 @@
return val;
}
-static inline void
-superio_select(int ldn)
+static inline void superio_select(int ldn)
{
outb(DEV, REG);
outb(ldn, VAL);
}
-static inline void
-superio_enter(void)
+static inline int superio_enter(void)
{
+ /*
+ * Try to reserve REG and REG + 1 for exclusive access.
+ */
+ if (!request_muxed_region(REG, 2, DRVNAME))
+ return -EBUSY;
+
outb(0x87, REG);
outb(0x01, REG);
outb(0x55, REG);
outb(0x55, REG);
+ return 0;
}
-static inline void
-superio_exit(void)
+static inline void superio_exit(void)
{
outb(0x02, REG);
outb(0x02, VAL);
+ release_region(REG, 2);
}
/* Logical device 4 registers */
@@ -1542,11 +1545,15 @@
static int __init it87_find(unsigned short *address,
struct it87_sio_data *sio_data)
{
- int err = -ENODEV;
+ int err;
u16 chip_type;
const char *board_vendor, *board_name;
- superio_enter();
+ err = superio_enter();
+ if (err)
+ return err;
+
+ err = -ENODEV;
chip_type = force_id ? force_id : superio_inw(DEVID);
switch (chip_type) {
