[SCSI] remove cmd->serial_number litter
Stop using cmd->serial_number in printks.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
diff --git a/drivers/scsi/wd33c93.c b/drivers/scsi/wd33c93.c
index 4468ae3..97ae716 100644
--- a/drivers/scsi/wd33c93.c
+++ b/drivers/scsi/wd33c93.c
@@ -381,7 +381,7 @@
hostdata = (struct WD33C93_hostdata *) cmd->device->host->hostdata;
DB(DB_QUEUE_COMMAND,
- printk("Q-%d-%02x-%ld( ", cmd->device->id, cmd->cmnd[0], cmd->serial_number))
+ printk("Q-%d-%02x( ", cmd->device->id, cmd->cmnd[0]))
/* Set up a few fields in the scsi_cmnd structure for our own use:
* - host_scribble is the pointer to the next cmd in the input queue
@@ -462,7 +462,7 @@
wd33c93_execute(cmd->device->host);
- DB(DB_QUEUE_COMMAND, printk(")Q-%ld ", cmd->serial_number))
+ DB(DB_QUEUE_COMMAND, printk(")Q "))
spin_unlock_irq(&hostdata->lock);
return 0;
@@ -687,7 +687,7 @@
*/
DB(DB_EXECUTE,
- printk("%s%ld)EX-2 ", (cmd->SCp.phase) ? "d:" : "", cmd->serial_number))
+ printk("%s)EX-2 ", (cmd->SCp.phase) ? "d:" : ""))
}
static void
@@ -963,7 +963,7 @@
case CSR_XFER_DONE | PHS_COMMAND:
case CSR_UNEXP | PHS_COMMAND:
case CSR_SRV_REQ | PHS_COMMAND:
- DB(DB_INTR, printk("CMND-%02x,%ld", cmd->cmnd[0], cmd->serial_number))
+ DB(DB_INTR, printk("CMND-%02x", cmd->cmnd[0]))
transfer_pio(regs, cmd->cmnd, cmd->cmd_len, DATA_OUT_DIR,
hostdata);
hostdata->state = S_CONNECTED;
@@ -1007,7 +1007,7 @@
switch (msg) {
case COMMAND_COMPLETE:
- DB(DB_INTR, printk("CCMP-%ld", cmd->serial_number))
+ DB(DB_INTR, printk("CCMP"))
write_wd33c93_cmd(regs, WD_CMD_NEGATE_ACK);
hostdata->state = S_PRE_CMP_DISC;
break;
@@ -1174,7 +1174,7 @@
write_wd33c93(regs, WD_SOURCE_ID, SRCID_ER);
if (phs == 0x60) {
- DB(DB_INTR, printk("SX-DONE-%ld", cmd->serial_number))
+ DB(DB_INTR, printk("SX-DONE"))
cmd->SCp.Message = COMMAND_COMPLETE;
lun = read_wd33c93(regs, WD_TARGET_LUN);
DB(DB_INTR, printk(":%d.%d", cmd->SCp.Status, lun))
@@ -1200,8 +1200,8 @@
wd33c93_execute(instance);
} else {
printk
- ("%02x:%02x:%02x-%ld: Unknown SEL_XFER_DONE phase!!---",
- asr, sr, phs, cmd->serial_number);
+ ("%02x:%02x:%02x: Unknown SEL_XFER_DONE phase!!---",
+ asr, sr, phs);
spin_unlock_irqrestore(&hostdata->lock, flags);
}
break;
@@ -1266,7 +1266,7 @@
spin_unlock_irqrestore(&hostdata->lock, flags);
return;
}
- DB(DB_INTR, printk("UNEXP_DISC-%ld", cmd->serial_number))
+ DB(DB_INTR, printk("UNEXP_DISC"))
hostdata->connected = NULL;
hostdata->busy[cmd->device->id] &= ~(1 << cmd->device->lun);
hostdata->state = S_UNCONNECTED;
@@ -1292,7 +1292,7 @@
*/
write_wd33c93(regs, WD_SOURCE_ID, SRCID_ER);
- DB(DB_INTR, printk("DISC-%ld", cmd->serial_number))
+ DB(DB_INTR, printk("DISC"))
if (cmd == NULL) {
printk(" - Already disconnected! ");
hostdata->state = S_UNCONNECTED;
@@ -1491,7 +1491,6 @@
} else
hostdata->state = S_CONNECTED;
- DB(DB_INTR, printk("-%ld", cmd->serial_number))
spin_unlock_irqrestore(&hostdata->lock, flags);
break;
@@ -1637,8 +1636,8 @@
cmd->host_scribble = NULL;
cmd->result = DID_ABORT << 16;
printk
- ("scsi%d: Abort - removing command %ld from input_Q. ",
- instance->host_no, cmd->serial_number);
+ ("scsi%d: Abort - removing command from input_Q. ",
+ instance->host_no);
enable_irq(cmd->device->host->irq);
cmd->scsi_done(cmd);
return SUCCESS;
@@ -1662,8 +1661,8 @@
uchar sr, asr;
unsigned long timeout;
- printk("scsi%d: Aborting connected command %ld - ",
- instance->host_no, cmd->serial_number);
+ printk("scsi%d: Aborting connected command - ",
+ instance->host_no);
printk("stopping DMA - ");
if (hostdata->dma == D_DMA_RUNNING) {
@@ -1729,8 +1728,8 @@
while (tmp) {
if (tmp == cmd) {
printk
- ("scsi%d: Abort - command %ld found on disconnected_Q - ",
- instance->host_no, cmd->serial_number);
+ ("scsi%d: Abort - command found on disconnected_Q - ",
+ instance->host_no);
printk("Abort SNOOZE. ");
enable_irq(cmd->device->host->irq);
return FAILED;
@@ -2180,8 +2179,8 @@
strcat(bp, "\nconnected: ");
if (hd->connected) {
cmd = (struct scsi_cmnd *) hd->connected;
- sprintf(tbuf, " %ld-%d:%d(%02x)",
- cmd->serial_number, cmd->device->id, cmd->device->lun, cmd->cmnd[0]);
+ sprintf(tbuf, " %d:%d(%02x)",
+ cmd->device->id, cmd->device->lun, cmd->cmnd[0]);
strcat(bp, tbuf);
}
}
@@ -2189,8 +2188,8 @@
strcat(bp, "\ninput_Q: ");
cmd = (struct scsi_cmnd *) hd->input_Q;
while (cmd) {
- sprintf(tbuf, " %ld-%d:%d(%02x)",
- cmd->serial_number, cmd->device->id, cmd->device->lun, cmd->cmnd[0]);
+ sprintf(tbuf, " %d:%d(%02x)",
+ cmd->device->id, cmd->device->lun, cmd->cmnd[0]);
strcat(bp, tbuf);
cmd = (struct scsi_cmnd *) cmd->host_scribble;
}
@@ -2199,8 +2198,8 @@
strcat(bp, "\ndisconnected_Q:");
cmd = (struct scsi_cmnd *) hd->disconnected_Q;
while (cmd) {
- sprintf(tbuf, " %ld-%d:%d(%02x)",
- cmd->serial_number, cmd->device->id, cmd->device->lun, cmd->cmnd[0]);
+ sprintf(tbuf, " %d:%d(%02x)",
+ cmd->device->id, cmd->device->lun, cmd->cmnd[0]);
strcat(bp, tbuf);
cmd = (struct scsi_cmnd *) cmd->host_scribble;
}
